Peri Catalogue Formwork Accessories

Edition 08/02 PERI Ltd. Formwork & Scaffolding Market Harborough Road Clifton upon Dunsmore Rugby Warwickshire CV23 0AN Tel: 01788 861600 Fax: 01788 861610 www.peri.ltd.uk

The PERI Formwork Accessories catalogue gives an up to date list of individual components that can be used by any contractor whether or not they are using PERI Formwork Systems. Order using the enclosed Price List/Order Form. If your order form is missing you can download a copy from our internet site at: www.peri.ltd.uk/sales Email: [email protected]

Important notes: Our products are to be used in accordance with the relevant national and european safety regulations. Safety precautions and allowable loads are to be strictly observed. Separate structural calculations are required for any deviations from standard design data. The information contained herein is subject to technical change in the interests of progress.

Inside back cover Contains CD of 2002 Handbook

Contents Page 2

15mm Tie Equipment Page 3

20mm & 26mm Tie Equipment Page 4

Water Barriers & Plastic Tubes Page 5

Anchor Equipment Page 6

Anchor System SK, DK & KK Page 7

Anchor System Tools & Accessories Page 8

Screws & Fixings Page 9, 10, 11, 12

Plywood

Formwork Accessories SUCCESSFUL CONSTRUCTION WITH PERI

15mm Tie Equipment Dywidag DW15 Tie Rod o.

Item N 201-002

Length 6.0m

Weight 9 kg

DW15 Wingnut Item No. 201-001

Size DW15

Weight 0.40 kg

Working load: 90 kN Ultimate load: 190 kN Special lengths available on request.

DW15 Wingnut Pivotplate o.

Item N 201-004

Size DW15

Weight 1.08 kg

DW15 Counterplate Item No. 030-140

Size DW15

Weight 1.60 kg

Maximum angle deviation: 15°.

120 x 120 x 15mm hole dia.: 20mm

DW15 Wingnut Counterplate

DW15 Triple Wingnut

o.

Item N 030-110

Size DW15

Weight 0.8 kg

Item No. 030-190

Size DW15

Weight 0.53 kg

Backplate dia.: 96mm

DW15 Cam Nut Item No. 030-130

Size DW15

DW15 Fitsch Weight 0.32 kg

Item No. 201-003

Size DW15

Weight 0.06 kg

Weldable anchor point

DW15 Hex. Coupler o.

Item N 030-090

Size Weight SW30/108mm 0.4 kg

DW15 Hex. Nut Item No. 030-070

Size SW30/50mm

Weight 0.20 kg

Central stop ensures correct embedment.

Formwork Accessories Page 2

Sales & Technical Helpline TEL: 01788 861660

20mm & 26mm Tie Equipment Dywidag DW20 Tie Rod o.

Item N 201-842

Length 6.0m

Weight 14.82 kg

DW20 Wingnut Item No. 030-990

Size DW20

Weight 0.80 kg

Working load: 160 kN Ultimate load: 345 kN Special lengths available on request.

DW20 Counterplate o.

Item N 030-830

Size DW20

DW20 Hex. Coupler Weight 2.20 kg

Item No. 030-590

Size Weight SW36/110mm 0.65 kg

120 x 120 x 20mm hole dia.: 26mm

Central stop ensures correct embedment.

Dywidag DW26 Tie Rod

DW26 Counterplate

o.

Item N 201-687 201-689 201-688

Length 6.0m 1.5m 0.5m

Weight 25.95 kg 6.75 kg 2.25 kg

Item No. 030-420

Size DW26

Weight 2.20 kg

120 x 120 x 20mm hole dia.: 32mm

Working load: 260 kN Ultimate load: 568 kN Special lengths available on request.

DW26 Nut Coupling Item No. 030-400

Size M30/DW26

DW26 Hex. Coupler Weight 2.41 kg

Item No. 030-980

Size Weight SW46/150mm 1.40 kg

Central stop ensures correct embedment.

Tie Rod Wrench Item No. 031-070 031-050

Size DW15 DW20

Weight 1.26 kg 1.69 kg

Enables one person to tighten tie rods.

Formwork Accessories SUCCESSFUL CONSTRUCTION WITH PERI

Page 3

Water Barriers & Plastic Tubes DW15 Water Barrier o.

Item N 201-365

Size DW15

DW15 Water Barrier Reducer Item No. 201-595

Weight 0.60 kg

Size DW15

Weight 0.001 kg

Length: 112mm

NB. 2 No. Water Barrier Reducers required per DW 15 Water Barrier.

DW20 Water Barrier

DR22 Plug

o.

Item N 201-616

Size DW20

Item No. 065-036

Weight 0.80 kg

Size SM 12/22mm 1000

Weight 2.00 kg

Length: 160mm

SM = Selling Multiple

Plastic Cover Cones Item No. 201-630 201-631 201-632 201-624 201-626 201-627

Size DW15 DW15 DW15 DW20 DW20 DW20

Cover 10mm 25mm 50mm 12mm 25mm 50mm

SM 100 100 100 100 100 100

Weight 0.61 kg 1.36 kg 2.70 kg 0.87 kg 1.38 kg 2.50 kg

Tube Ref. 22/26 22/26 (Limited Availability) 22/26 26/30 26/30 (Limited Availability) 26/30

ID 22mm 26mm 28mm 32mm 42mm

OD 26mm 30mm 33mm 37mm 47mm

Weight 0.31 kg 0.39 kg 1.03 kg 1.12 kg 1.47 kg

SM = Selling Multiple

Plastic Spacer Tube Item No. 201-720 201-623 031-626 031-627 031-634

Ref. 22/26 26/30 28/33 32/37 42/47

Length 2.0m 2.0m 3.0m 3.0m 3.0m

Flupps o.

Item N 201-195 201-625

Use DW15 + SK/DK-DW15 DW20 SK/DK-DW20 SB-DW15 + SK-DW20 + DW26 SB-DW20 & 26 + DK-DW26

Tie Plug Size SM 22/26mm 250 26/30mm 250

Weight 1.83 kg 2.20 kg

Item No. 201-149

Size 4 ltr

Weight 8.10 kg

Approximate usage: 100 tie holes @ 150 ∆ x 50mm 85 tie holes @ 200 ∆ x 50mm

SM = Selling Multiple

Formwork Accessories Page 4

Sales & Technical Helpline TEL: 01788 861660

Anchor Equipment Rock Anchors o.

Item N 201-146 201-617 201-634

Size DW15 DW20 DW26

Stop End Sleeve & Plug Weight 0.27 kg 0.67 kg 0.75 kg

Item No. 065-039 065-060

Size DW15 Plug

Weight 0.08 kg 0.001 kg

NB. Anchors require proof loading before use.

Bolt Anchor Sleeve o.

Item N 026-280

Size DW15

Anchor Positioning Stud Weight 1.09 kg

Item No. 026-440

Size DW15

Weight 0.10 kg

Backplate: 100 x 100 x 8mm Sleeve length: 120mm

Threaded Anchor Plates Item No. 030-840 030-860 030-870

Size DW15 DW20 DW26

Formwork Accessories SUCCESSFUL CONSTRUCTION WITH PERI

Weight 0.60 kg 0.70 kg 1.20 kg

Page 5

Anchor System SK, DK & KK DK Plastic Sealing Cones Item No. 031-635 031-636 031-637 031-638

Size DW15/35 DW15/55 DW20/55 DW26/55

Cover 35mm 55mm 55mm 55mm

Colour Red Red Yellow White

SM 50 50 50 50

Weight 1.85 kg 3.05 kg 4.0 kg 3.5 kg

Tube Ref. 22/26 22/26 28/33 42/47

For further details of PERI Anchor Systems refer to Tie System brochure Ref.: 790557 SM = Selling Multiple

DK Sealing Washer o.

Item N Size 031-639 DW15 (red)

SM 50

DK Concrete Cones Weight 0.20 kg

Item No. Size 031-641 DW15

SM Weight 50 10.80 kg

Produces a shadow joint.

SM = Selling Multiple

SM = Selling Multiple

DK Concrete Cones

SK Plastic Tie Cones

o.

Item N Size SM 031-642 DW15 58/30mm 50 031-643 Uni 58/52mm 50

Weight 8.50 kg 13.00 kg

Item No. Size 031-645 DW15 (red) 031-646 DW20 (yellow) 031-647 DW26 (white)

Weight 0.52 kg 0.75 kg 1.80 kg

SM = Selling Multiple

SK/KK Concrete Sealing Cones

SK Sealing Washers Item No. Size 031-639 DW15 (red) 031-648 DW20 (yellow) 031-649 DW26 (white)

SM = Selling Multiple

Formwork Accessories Page 6

SM 50 50 50

Weight 0.20 kg 0.35 kg 0.50 kg

Item No. Size SM Weight 031-650 DW20 67/60mm 50 20.30 kg 031-651 DW26 100/60mm 25 21.90 kg

SM = Selling Multiple

Sales & Technical Helpline TEL: 01788 861660

Anchor System Tools & Accessories DK Cone Pliers o.

Item N 031-644

Size 58mm

DK Sealing Cone Spanner Weight 0.56 kg

Item No. 031-655

Size -

Weight 0.89 kg

Used for inserting DK concrete cones.

Sockets o.

Item N 029-650 1 029-630 2 1. 2.

Ratchet Wrench Size 27mm 1/2” SW46mm 1”

Weight 0.16 kg 0.58 kg

Item No. 072-180 029-610

Size 1/ ” 2 1”

Weight 0.56 kg 5.30 kg

For removing SK tie cones DW15. For removing SK tie cones DW26.

SW 36 Socket Wrench o.

Item N 031-330

Size SW36

Weight 2.46 kg

For removing SK tie cones DW20.

Concrete Cone Gauge Item No. 101-995

Size -

Weight 1.03 kg

Ensures flush insertion of concrete cones.

SK Cone Pliers Item No. 031-656 031-657

Size 67mm 100mm

Weight 0.60 kg 0.66 kg

Used for inserting SK concrete cones.

Sealing Compound Item No. 031-554

Size 5 kg

Weight 6.13 kg

Compound for gluing concrete cones in place.

Formwork Accessories SUCCESSFUL CONSTRUCTION WITH PERI

Page 7

Screws & Fixings Framing Clip o.

Item N Size 018-290 185 x 36mm

Double Headed Nails SM Weight 100 10.0 kg

Item No. Size 018-280 65mm

Weight 5.0 kg

For connecting perpendicular girders or timbers.

SM = Selling Multiple

N.B. 1 unit = 1000 pieces.

Torx Screws

Spax Screws

o.

Item N 024-540 024-470 024-690 024-950

Size 6x40 6x60 6x80 6x100

SM 100 100 100 100

Weight 0.50 kg 0.80 kg 0.90 kg 1.2 kg

Item No. 024-550 024-960 024-970 024-980 024-990

Size 8x20 6x120 6x140 6x160 6x180

SM 100 100 100 100 100

Weight 0.7 kg 1.5 kg 1.7 kg 1.9 kg 2.12 kg

SM = Selling Multiple

SM = Selling Multiple

Bit Point TX30 Item No. Size 072-140 TX30

SM Weight 10 0.05

SM = Selling Multiple

Coach Screws Item No. 029-440 051-640 024-270 024-260 024-490 024-500

Size 6x20 6x80 8x60 8x80 8x100 8x130

SM 100 100 100 100 100 100

Weight 0.4 kg 1.4 kg 2.0 kg 2.78 kg 3.4 kg 3.98 kg

SM = Selling Multiple

Formwork Accessories Page 8

Sales & Technical Helpline TEL: 01788 861660

Plywood PERI - Betofilm Birch faced, mirror construction 120 g/m2 phenolic film on both sides.

Item No. Size 201-101 18mm x 1220 x 2440

Sht/Pack 50

Wt/Pack 1560 kg

Item No. 201-102 201-103 201-107 201-108

Sht/Pack 50 50 45 45

Wt/Pack 1340 kg 1340 kg 1410 kg 1410 kg

18mm 9 ply. All edges sealed. Fair faced finish, typically F4 or F3. Ideal for walls and soffits. Also suitable for short run pre-cast work. Expect 5-20 uses dependent on handling.

PERI - Spruce (un-coated) Uncoated Spruce plywood, thick veneer construction. 18mm 7 ply, 21mm 7 ply construction. III/III - Sanded both sides. Open defects allowed on both faces. Scarificial or below ground work where finish is not critical. Ideal as backing ply. G/III - Good one face, other face open to defects. Low quality finish F1 or F2.

Size 18mm x 2440 x 1220 III/III 18mm x 2440 x 1220 G/III 21mm x 2440 x 1220 III/III 21mm x 2440 x 1220 G/III

Number of uses: III/III - Expect 1-2 uses dependent on handling. G/III - Expect 1-4 uses dependent on handling.

PERI - Form MDO 333 MDO faced plywood with alternating hardwood/softwood veneers. 17.5mm 7 ply construction with 370 g/m2 MDO face and 120 g/m2 dark brown phenolic film on reverse face (as balancer). All edges sealed.

Item No. Size 201-109 17.5mm x 2440 x 1220

Sht/Pack 50

Wt/Pack 1485 kg

Item No. Size 201-106 18mm x 1220 x 2440

Sht/Pack 50

Wt/Pack 1560 kg

Fair faced finish, typically F4 or F3. Ideal for walls and soffits. Expect 1-12 uses dependent on handling.

PERI - DuoForm Birch faced, mirror construction plywood. MDO on one face with 120 g/m2 phenolic film on reverse face. 18mm 9 ply. All edges sealed. Fair faced finish, typically F4 or F3. Ideal for walls and soffits. NB. This board is reversible. Expect 1-20 uses dependent on handling.

PERI Clean Release Agent o.

Item N 201-147 201-148

Size 25 Litres 205 Litres

Weight 23.25 kg 195 kg

Pressure Sprayer Item No. 201-008

Size 5 Litres

Weight 4.44 kg

A Category 5 Release Agent of special formulation giving optimum release and concrete finish. This product contains highly refined oils and is classified as 'non hazardous'.

Formwork Accessories SUCCESSFUL CONSTRUCTION WITH PERI

Page 9

Plywood Fin-Ply 9mm, 12mm & 18mm This coated plywood complies with the most stringent of specifications. Cross-bonded birch veneers coated with 240g/m 2 reinforced phenolic resin on both sides. Edges sealed all round.␣

Item No. 052-095 052-150 052-630 052-240

Size 9mm x 1500 x 3000 12mm x 1500 x 3000 18mm x 1220 x 2440 18mm x 1500 x 3000

Sht/Pack 50 50 30 30

Wt/Pack 1440 kg 1832 kg 1090 kg 1649 kg

Item No. 052-640 052-260 052-060 052-270 052-070

Size 21mm x 1220 x 2440 21mm x 1250 x 2500 21mm x 1500 x 2500 21mm x 1500 x 3000 21mm x 1500 x 4000

Sht/Pack 25 25 25 25 25

Wt/Pack 1060 kg 1114 kg 1336 kg 1603 kg 2138 kg

Item No. Size 052-823 20mm x 7500 x 2700 052-829 20mm x 5400 x 2000

Sht/Pack 5 10

Wt/Pack 1367 kg 1460 kg

Item No. Size 052-820 21mm x 1250 x 2500

Sht/Pack 45

Wt/Pack 2004 kg

Item No. Size 052-822 21mm x 1500 x 3000

Sht/Pack 30

Wt/Pack 1741 kg

Ideal for walls and slabs with the highest finish specification for a flat smooth finish. Expect 30-70 uses dependent on handling.

Fin-Ply 21 mm This coated plywood complies with the most stringent of specifications. Cross-bonded birch veneers coated with 240g/m 2 reinforced phenolic resin on both sides. Edges sealed all round. Ideal for walls and slabs with the highest finish specification for a flat smooth finish. Expect 30-70 uses dependent on handling.

Fin-Ply Maxi This coated plywood complies with the most stringent of specifications. Cross-bonded birch veneers coated with 400g/m2 (7.5 x 2.7m) or 240g/m2 (5.4 x 2.0m) reinforced phenolic resin on both sides. Edges sealed all round. Ideal for walls and slabs with the highest finish specification for a flat smooth finish. Expect 30-70 uses dependent on handling.

PERI-Birch High grade coated plywood with robust construction for use in virtually any application. 100% Birch, 15 glued veneers, coated with 120g/m2 phenolic film on both faces. Edges sealed all round. Ideal for walls and slabs with the highest finish specification for a flat concrete finish. Expect 20-50 uses dependent on handling.

Combi-Mirror Finnish combination mirror plywood. 13-15 ply. Birch face veneers with alternating Spruce/ Birch middle veneers. Coated with 120g/m2 phenolic film on both faces. Edges sealed all round. Ideal for slab construction where high finish specification is required. Expect 15-30 uses dependent on handling.

Formwork Accessories Page 10

Sales & Technical Helpline TEL: 01788 861660

Plywood PERI - Beto Finnish combination mirror plywood. 11 ply. Birch face veneers with alternating Spruce/ Birch middle veneers. Coated with 120g/m2 phenolic film on both faces. Edges sealed all round.

Item No. Size 052-821 21mm x 1250 x 2500 052-824 21mm x 625 x 2500

Sht/Pack 45 90

Wt/Pack 1674 kg 1674 kg

Item No. Size 052-830 21mm x 2500 x 1250 052-831 21mm x 2500 x 500

Sht/Pack 45 90

Wt/Pack 1533 kg 1226 kg

Item No. Size 052-620 21mm x 2500 x 1250

Sht/Pack 28

Wt/Pack 1313 kg

Item No. Size 052-020 8mm x 2500 x 1250 052-010 4mm x 2500 x 1250

Sht/Pack 67 75

Wt/Pack 1277 kg 610 kg

Item No. 050-070 050-080 050-000 050-190 050-040 050-200 050-030 052-590 052-380

Sht/Pack 100 100 100 50 50 50 30 50 10

Wt/Pack 750 kg 1000 kg 1250 kg 1000 kg 1250 kg 1500 kg 1500 kg 1875 kg 1000 kg

Ideal for slab construction where high, reasonably smooth finish is required. Expect 15-25 uses dependent on handling.

PERI - Spruce (coated) A reasonably priced coated plywood for slab formwork. Strong yet light. 11 northern softwood veneers, coated with 120g/m2 phenolic film on both faces. Edges sealed all round. Ideal for slab construction where high finish specification is required. Reasonably smooth finish with slight texturing possible. Expect 1-10 uses dependent on handling.

AS-Ply Asiatic plywood, 11 ply, coated with 120g/ m2 phenolic film on both faces. Edges sealed all round. Used mainly for slab construction where high finish is required. Reasonably smooth finish with slight texturing possible. Expect 1-10 uses dependent on handling.

Facing Ply Coated plywood, 3 or 5 veneers, coated with 120g/m2 phenolic film on both faces. Edges sealed all round weather and boil resistant glue. Used for wall and slab construction or for fixing load bearing panels. Flat concrete finish.

3-Ply Large sheets coated with yellow/red melamine resin, edges sealed all round. Three 7mm Spruce veneers glued crosswise with the option of a chipboard middle veneer. Used for wall and slab construction. Reasonable finish with slight grain patterning. Expect 10-40 uses dependent on handling.

Formwork Accessories SUCCESSFUL CONSTRUCTION WITH PERI

Size 21mm x 1500 x 500 21mm x 2000 x 500 21mm x 2500 x 500 21mm x 2000 x 1000 21mm x 2500 x 1000 21mm x 3000 x 1000 21mm x 5000 x 1000 21mm x 2500 x 1500 21mm x 5000 x 2000

Page 11

Plywood Arauco Ply Pine plywood with 7 ply construction. C+/C quality with smooth face on one side, surface sanded.

Item No. Size 052-837 21mm x 2500 x 1250

Sht/Pack 46

Wt/Pack 1624 kg

Item No. Size 052-827 21mm x 2440 x 1220 052-828 21mm x 2500 x 1250

Sht/Pack 45 45

Wt/Pack 1340 kg 1406 kg

Ideal for formwork and as general purpose plywood. Concrete finishes to normal requirements with slight timber patterning on surface. Expect 2-5 uses dependent on handling.

FinNa Plywood Conifer plywood from Finland. 7 ply construction, II/III quality, sanded surface smooth one side. Very high quality. Formlining and general purpose plywood with slight timber patterning to the surface.␣ Expect 2-5 uses dependent on handling.

Formwork Accessories Page 12

Sales & Technical Helpline TEL: 01788 861660

Please find attached a copy of our Formwork Handbook 2002 on CD Follow on screen instructions for installation

The PERI Range of Products Panel Formwork

Column Formwork

PERI TRIO and TRIO-L Versatile panel system

PERI SRS Circular column formwork

PERI DOMINO Lightweight panel system

PERI RAPID Aluminium column formwork

PERI HANDSET The “one man” panel system

PERI QUATTRO Column formwork

Girder Wall Formwork

Girder Slab Formwork

PERI VARIO GT 24 Wall formwork

PERI MULTIFLEX Girder slab formwork

PERI RUNDFLEX Circular formwork

PERI UNIPORTAL Table form

PERI GRV Tie-less circular formwork

PERI PD 8 Table form system

Shoring Systems

Platform Systems

PERI MULTIPROP The aluminium prop

Folding platform FB 180 Universal working and protective scaffold to DIN 4420

PERI ST 100 Stacking tower

PEP = PERI EURO PROP

ASG 160 The light platform system for building trades

Climbing Formwork

Panel-Slab Formwork

PERI PEP Prop

PERI CB Climbing system

PERI SKYDECK Aluminium slab formwork system

PERI ACS Self Climbing formwork PERI SKS Single-sided climbing formwork Scaffolding

Software

PERI UP 70/100 Frame scaffolding

ELPOS, Software for formwork planning Further Systems:

PERI UP Rosett Modular scaffolding

Custom forms Site equipment Brace frames

PERI UP Rosett Shoring

Market Harborough Road Clifton upon Dunsmore Rugby Warwickshire CV23 0AN Tel: 01788 861600 Fax: 01788 861610 www.peri.ltd.uk

GB

PERI Ltd. Formwork & Scaffolding

08/02 Art. Nr.: 777930

Heavy duty props