PACKER R 3
Short Description
Packer R3...
Description
S ervice e rvice Unit Packer Systems - Single String Retrievable Mechanical Set
Unit No. SU 8145 August 6, 2009 Rev. New
Page 1 of 31
R-3™ R-3™ Sin Singl gle e and and DoubleDoubl e-Grip Grip Retr Retrievable ievable Casin Casing g Pack Packers ers Product Prod uct Family Nos. H64101 H64101 and and H642 H64201 01 THIS DOCUMENT IS FOR INTERNAL USE ONLY
Table of Contents Introduction......................................... 1 Features/Benefits ............................... 2 Operation............................................ 3 Set-Down Weight Required To Pack Off Packing Element System.............. 3 Available Packing Element Systems and Temperature Limitations........... 3 Set-Down Weight Required To Pack Off Packing Element System........... 3 Effect Of Tubing and Annulus Pressure On Unloader..................... 4 Areas (In Sq In.) Acted Upon By Tubing and Annulus Pressures........ 6 Specification Guide............................. 7 Spring Identification Guide Drawing No. 333-996..................................... 8 Dimensional Data Data ............................... 8 R-3™ Single-Grip Retrievable Casing Packer (Product Family No. H64101) .................................... 9 Assembly and Dimensional Dat Drawing No. 162-332, Size 28B ...... 9 Dimensional Data, Size 28B............... 9 Parts List, Size 28............................. 10 Spring Identification Drawing No. 333-996................................... 11 Dimensional Data Data ............................. 11 Assembly and Dimensional Data
Drawing No. 162-333, Sizes 35 and 41............................. 12 Dimensional Data, Sizes 35 and 41............................. 12 Parts List, List, Sizes 35 and 41 ............ .............. .. 13 Spring Identification Guide Drawing No. 333-996 .................... 14 Dimensional Data............................. 14 Assembly and Dimensional Data Drawing No. 165-234, Sizes 43 43 - 47 ................................. 15 Dimensional Data, Sizes 43 - 47...... 16 Parts List, Sizes Sizes 43 - 47 ................... 17 R-3™ Single- and Double-Grip Retrievable Casing Packer (Product Family Nos. H64101 and H64201).................................. 19 Parts List, Sizes Sizes 43 - 47 ................... 19 Alternate Parts, Sizes 43 - 47 .......... 21 Spring Identification Guide Drawing No. 333-996 .................... 22 Dimensional Data............................. 22 R-3™ Double-Grip Retrievable Casing Packer (Product Family No. H64201) .................................. 23 Assembly and Dimensional Data Drawing No. 165-236, Sizes 49 and 51............................. 23
Dimensional Data, Sizes 49 and 5 ............ ................. ........... ........... ..... 1 24 Parts List, List, Sizes 49 and 51 ............ .............. .. 25 R-3™ Single- and Double-Grip Retrievable Casing Packers (Product Family Nos. H64101 and H64201) H64201) ........... ................. ............ ............ .......... .... 26 Parts List, List, Sizes 49 and 51 ............ .............. .. 26 Alternate Parts, Sizes 49 and 51 ..... 27 Rework To Adapt Piston Retainer For Use With Restraining Pins (Product Family Nos. H64101 and H64201) H64201) ........... ................. ............ ............ .......... .... 28 Assembly Drawing No. 165-491 ...... 28 Field Rework .................................... 28 Restraining Pin Assembly Assembly ................ 29 Assembly Drawing No. 333-995 ...... 29 Installatio Installation n Instructions Instructions ........... ................. ......... ... 30 Assembly Instructions ...................... 30 Double-Gr Double-Grip ip Packer Packer ........... ................. ............ ........ .. 30 Disassembly Disassembly Instructions Instructions ........... ................ ....... 31 Double-Gr Double-Grip ip Packer Packer ........... ................. ............ ........ .. 31 Assembly Instructions ...................... 31 Single-Grip Packer........................... 31 Disassembly Disassembly Instructions Instructions ........... ................ ....... 31 Single-Grip Packer........................... 31
Introduction The R-3™ Retrievable Casing Packer is a retrievable set-down packer that features a large bypass area through the Packer. The bypass area is controlled by a face-seal type bypass valve which is actuated by a 30-inch stroke mandrel. The Packer is available in a single-grip version for use as a conventional long-stroke production packer, and in a double-grip version (with hold-down) for combination production and well stimulation operations.
This document is and contains unpublished, copyrighted and confidential information information of Baker Hughes, and is revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in conjunction with equipment or product. © 8/6/09 Baker Hughes Incorporated.
WARNING Use of Baker Baker equipment contrary to manufacturer’s manufacturer’s sp ecification may result in property damage, damage, serious injury or fatality.
The double-grip packer, for use where pressure differential from below the packer is anticipated, features an integral hydraulic button-type holddown that is located below the bypass valve. The double-grip packer also incorporates a unique, built-in, “differential lock” which utilizes a balance sleeve actuated by pressure from below the packer. This pressure creates an additional downward force which, combined with set-down weight, helps maintain the force necessary to keep the bypass valve closed.
Features/Benefits • • • • • • •
Rugg Rugged ed rock rocker er-t -typ ype e sli slip p sys syste tem m Effec Effectiv tive e bypas bypass s desig design n allow allows s rapid rapid pres pressur sure e equalization and resists packing element swaboff FieldField-pro proven ven,, thre three-p e-piec iece e pack packing ing elemen elementt system One-f One-four ourth th turn turn righ right-h t-hand and rotati rotation on to set Auto-j Auto-jay ay bott bottom om allo allows ws pack packer er to to be retr retriev ieved ed with straight pick up Hydra Hydrauli ulic c butto button-t n-type ype hold-d hold-down own locate located d below below bypass valve (Double-Grip) Unique Unique,, built built-in -in,, "diff "differe erenti ntial al lock lock syst system" em" assists in keeping bypass closed (Double-Grip)
Drawin g No. 165-234 165-234
THIS DOCUMENT IS FOR INTERNAL USE ONLY
Unit No. SU 8145 August 6, 2009 Page 2 of 31
Rev. New
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent with the purpose of the document, without t he written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in conjunction with equipment or product. © 8/6/09 Baker Hughes Incorporated. Incorporated.
Operation The R-3™ Retrievable Casing Packer is run in with the bypass valve in the open position to permit free circulation both through and around the packer. The packer, which is mechanically set by means of a J-Slot arrangement, should be run one foot below setting depth and then raised to the required position (to properly position the J-Slot). To release from the J-Slot, pick up the tubing, rotate to the right, and then slack off. The J-Pin will move clear of the J-Slot and the Cone will move under the slips. Application of set-down weight (see chart) closes and seals the bypass valve, sets the slips, and packs off the packing e lements. The formation below the packer, which is now completely isolated from the annulus above, is accessible only through the tubing string. To release the packer, raise the tubing string the full length of the packer. When the J-Pin shoulders, the J-Slot will be re-engaged, since the JPins on the Bottom Sub are so spaced as to always have one J-Pin located in the J-Slot when the tubing is picked up. When the tubing is lowered slightly, the J-Pin automatically engages the J-Slot if no right-hand torque is in the tubing at the tool.
When the tubing is raised to release the packer, the bypass valve opens to permit circulation through and around the packer. NOTE: If the J-Pin should unjay when the tubing is slacked off, rotate to the left (only enough to remove any right-hand torque from the tool) and pick up.
Set-Down Set-Down Weight Requi Requi red To Pack Off Packing Element System Pac k er Si ze
Har d n es s
Std 90 Special 80 Std 90-70-90 Std 95-70-95
28 35 41
Set-Down Weight 2,000 lb 1,000 lb 4,000 lb 4,000 lb
Av ailab ai lab l e Pack i ng Elemen Ele men t Sy s tem s and Temperature Temperature Limitatio ns Har d n es s 80-60-80 90-70-90 95-70-95 95-80-95
Tem p er at u r e 0 to 200°F 100 to 275°F 100 to 350°F 250 to 350°F
Set-Down Set-Down Weight Requi Requi red To Pack Off Packi Packi ng Element Sys tem Packer Size 43 45 45 x 2-3/8 46 and 47 49 51
Sp ec Ha Har dn dn es s 80 80-60-80 Si n g l e-Gr i p Do u b l e-Gr i p 4,000 lb 6,000 lb 4,000 lb 6,000 lb 6,000 lb 8,000 lb 8,000 lb 10,000 lb 15,000 lb 15,000 lb
St d Ha Har dn dn es s 90 90-70-90 S i n g l e- G r i p Do u b l e-Gr i p 5,000 lb 7,000 lb 5,000 lb 7,000 lb 4,000 lb 6,000 lb 7,000 lb 9,000 lb 9,000 lb 11,000 lb 15,000 lb 15,000 lb
Sp ec Ha Har dn dn es s 95 95-80-95 Si n g l e-Gr i p Do u b l e-Gr i p 6,000 lb 8,000 lb 6,000 lb 8,000 lb 5,000 lb 7,000 lb 8,000 lb 10,000 lb 10,000 lb 12,000 lb 15,000 lb 15,000 lb
THIS DOCUMENT IS FOR INTERNAL USE ONLY This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in conjunction with equipment or product. © 8/6/09 Baker Hughes Incorporated.
Unit No. SU 8145 August 6, 2009 Rev. New
Page 3 of 31
Effect Of Tubing and A nnul us Pressure On Unloader The unloader in the R-3™ Retrievable Casing Packer is not hydraulically balanced for any specific tubing size. This means that regardless of what size tubing the packer is run on, changes in tubing pressure and annulus pressure will act either to pump the unloader open (by acting against setdown weight) or help hold it closed. It is important, then, to know how much force will be created, and in what direction, for a given change in annulus or tubing pressure. The values given in the chart “Areas (In Sq. In.) Acted Upon By Tubing and Annulus Pressures” are printed shaded and unshaded. These values are not only the number of square inches acted upon by the pressure change, but also the direction of the resultant force. The areas unshaded will cause, with a pressure increase, a force tending to hold the unloader closed. The areas shown shaded will result in an upward force, or a force tending to open the unloader. The directions of the forces hold true if the tubing and annulus pressures at the tool are increased. If the tubing pressure at the tool is decreased, such as would occur in a swabbing operation, the direction of force as explained above would be reversed. The Balance Sleeve in the R-3 Double-Grip Packer works in this manner: When the tool is set and packed off, the groove in the Body just below the Seal is positioned under the snap fingers of the Balance Sleeve. As tubing pressure is increased, pressure acts between the two [2] O-rings on the Balance Sleeve, causing it to move down. When the bottom bevel on the outside of the snap fingers meets the inside bevel in the Balance Sleeve Housing, the snap fingers are forced inward into the groove in the Body. Tubing pressure continues to push the Balance Sleeve down until the inside bevel on the bottom of the snap fingers meets the bottom bevel of the groove in the Body. The tubing pressure which moved the Balance Sleeve down is now holding, through the snap fingers, the Body down. This force acts in the same direction as setdown weight to help prevent the Body from moving
up under high tubing pressures. If the Body were to move up, the unloader would open and tubingto-annulus communication would result. When the annulus pressure is greater than tubing pressure, the Balance Sleeve is held by the annulus pressure, against the Balance Sleeve Housing. In this position, the fingers of the Balance Sleeve do not act to help hold the Body down; setdown weight alone must be used to keep the unloader closed. It should be noted that the setdown weight required to keep the unloader closed need not be added to the weight required to set the packer if the value calculated is less than the force required to set the tool. • • • • • •
Columns 1, 2, 4, 5, 6, and 7 must be multiplied by the change in pressure at the tool. Column 3 must be multiplied by the tubing pressure. Areas tending to hold the unloader closed are unshaded. Areas tending to open the unloader are shaded. Multiplying a pressure change by a shaded figure gives a force tending to open the unloader. Multiplying a pressure change by an unshaded figure gives a force tending to hold the unloader closed.
When Tubing Pressure Is Greater Than Annulu s Pressur e At The Too l 1. Multiply the change in tubing pressure at the tool by Column 1. 2. Multiply the change in annulus pressure at the tool by Column 2. If the total of these two forces is tending to open the unloader, and is greater than the original pack-off weight, additional set-down weight is required. This additional weight is equal to the difference between the force tending to open the unloader and required pack-off weight. 3. Multiply the tubing pressure by Column 3. Since the figure in Column 3 is always shaded, the resulting force is tending to open the unloader by lifting the tubing at the surface. If by adding all three forces the result is a force tending to open the unloader and is greater than the maximum hook-load of the tubing before set-
THIS DOCUMENT IS FOR INTERNAL USE ONLY
Unit No. SU 8145 August 6, 2009 Page 4 of 31
Rev. New
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent with the purpose of the document, without t he written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in conjunction with equipment or product. © 8/6/09 Baker Hughes Incorporated.
ting the tool, the tubing will raise and the unloader will be opened. Since the hook-load is the limiting factor, high pressures at relatively shallow depths might be prohibit ive.
When Annulus Pressure Is Greater Than Tubing Pressure At The Tool 1. Multiply the change in tubing pressure by Column 4. 2. Multiply the change in annulus pressure by Column 5. If the total of these two forces is tending to open the unloader, and is greater than the original pack-off weight, additional set-down weight is required. This additional weight is equal to the difference between the force tending to open the unloader and the required pack-off weight. 3. Multiply the tubing pressure by Column 3. Since the figure in Column 3 is always shaded, the resulting force is tending to open the unloader by lifting the tubing at the surface. If by adding all three forces the result is a force tending to open the unloader and is greater than the maximum hook-load of the tubing before setting the tool, the tubing will raise and the unloader will be opened. Since the hook-load is the limiting factor, high pressures at relatively shallow depths might be prohibit ive.
When Annulus Pressure Is Greater Than Tubing Pressure At The Tool Due To Swabbing The Tubing 1. Multiply the change in tubing pressure by Column 6.
2. Multiply the change in annulus pressure by Column 7. If the result is a force tending to open the unloader, and is greater than the original pack-off weight, additional set-down weight is required. This additional weight is equal to the difference between the force tending to open the unloader and the required pack-off weight. NOTE: The above calculations assume the tub-
ing string is suspended in the elevators and slack off weight on packer can be maintained. Due to factors such as tubing ballooning, and thermal expansion or contraction, hydraulic calculations alone may not be sufficient to determine what is happening at the packer. When working deep at high pressure or with fluid temperature changes, and in cases where the wellhead is flanged up, running the R3DG TUBEMOVE™ computer program is necessary to determine if the unloader will remain closed under the conditions encountered in each application. Pressuring operations from below may not be possible with the R-3™ Single-Grip Packer. The calculations outlined on these pages will only help determine if the unloader will stay closed. In the case where tubing pressure is greater than annulus pressure, additional hydraulic calculations are necessary to determine how much slack off weight is required to keep the R-3 Single-Grip Packer from being hydraulically pumped up the hole.
THIS DOCUMENT IS FOR INTERNAL USE ONLY This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in conjunction with equipment or product. © 8/6/09 Baker Hughes Incorporated.
Unit No. SU 8145 August 6, 2009 Rev. New
Page 5 of 31
Ar eas (In Sq In .) Ac ted Upon B y Tu bing and A nn ul us Pres su res An nu lu s Pr ess ur e An nu lu s Pr ess ur e Great er Tubing Pressure Greater Greater Than Than Tubing Pressure at the Than Annu lus Pressure Tubing Pressure Tool Because of Tubing Tubing at the Tool Packer at the Tool Swabbing the Tubing ID Area or Drill Size Pipe OD Tubing An nu lu s Tubing An nu lu s Tu bi ng Ar ea A nn ul us Ar ea Ar ea Ar ea Ar ea Ar ea Col 1 Col 2 Col 3 Col 4 Col 5 Col 6 Col 7 1.315 1.2 .7 .9 .6 .1 .6 .1 28 1. 660 .6 .1 1.5 0 .7 0 .7 Single 1.900 0 .8 2.0 .6 1.4 .6 1.4 1.660 2.0 1.3 1.5 1.3 .6 1.3 .6 1.900 1.4 .6 2.0 .7 .1 .7 .1 35 Single 2-1/16 1.0 .1 2.4 .3 .6 .3 .6 2-3/8 .3 1.0 3.1 .4 1.7 .4 1.7 1.900 2.8 2.0 2.0 1.9 1.1 1.9 1.1 41 2-1/16 2.5 1.5 2.4 1.5 .5 1.5 .5 Single 2-3/8 1.7 .4 3.1 .8 .5 .8 .5 2-1/16 4.0 3.1 2.4 2.9 2.0 2.9 2.0 43 2-3/8 3.3 2.0 3.1 2.2 .9 2.2 .9 Single 2-7/8 1.7 1.0 4.7 .6 1.2 .6 1.2 2-1/16 1.2 .2 2.4 2.9 2.0 2.9 2.0 43 2-3/8 .4 .9 3.1 2.2 .9 2.2 .9 Double 2-7/8 1.1 2.9 4.7 .6 1.2 .6 1.2 2-3/8 3.3 2.0 3.1 2.2 .9 2.2 .9 45 Single 2-7/8 1.7 .1 4.7 .6 1.2 .6 1.2 45x2-3/8 2-7/8 2.4 4.7 2.8 1.0 2.8 1.0 4.2 Single 45x2-3/8 2-7/8 0.2 2.0 4.7 2.8 1.0 2.8 1.0 Double 2-3/8 .7 2.0 3.1 2.2 .9 2.2 .9 45 Double 2-7/8 2.2 4.0 4.7 .6 1.2 .6 1.2 2-3/8 5.7 4.4 3.1 4.4 3.1 4.4 3.1 46 and 47 Single 2-7/8 4.2 2.4 4.7 2.8 1.0 2.8 1.0 1 1.2 3.1 4.4 3.1 4.4 3.1 46 and 47 2-3/8 Double 2-7/8 1.4 3.2 4.7 2.8 1.0 2.8 1.0 2-7/8 11.3 9.5 4.7 9.5 7.7 9.5 7.7 49 3-1/2 8.9 6.3 7.0 7.2 4.6 7.2 4.6 Single 4-1/2 3.6 .1 12.3 1.9 1.7 1.9 1.7 2-7/8 1.6 .3 4.7 9.5 7.7 9.5 7.7 49 3-1/2 .8 3.4 7.0 7.2 4.6 7.2 4.6 Double 4-1/2 6.1 9.7 12.3 1.9 1.7 1.9 1.7 2-7/8 17.1 15.3 4.7 15.0 13.1 15.0 13.1 51 3-1/2 14.7 12.2 7.0 12.6 10.0 12.6 10.0 Single 4-1/2 9.5 5.9 12.3 7.4 3.7 7.4 3.7 2-7/8 1.2 3.0 4.7 15.0 13.1 15.0 13.1 51 3-1/2 3.6 6.1 7.0 12.6 10.0 12.6 10.0 Double 4-1/2 8.8 12.4 12.3 7.4 3.7 7.4 3.7 NOTE: Areas tending to hold unloader closed are unshaded. Areas tending to open unloader are shaded.
THIS DOCUMENT IS FOR INTERNAL USE ONLY
Unit No. SU 8145 August 6, 2009 Page 6 of 31
Rev. New
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent with the purpose of the document, without t he written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in conjunction with equipment or product. © 8/6/09 Baker Hughes Incorporated.
Specifi cation Guide Casing Wt in Lb OD (T and C) 2-7/8 6.4-6.5 2-7/8* 2-7/8 3-1/2 4 4-1/2 5
5-1/2
5-3/4 6
6-5/8
4.7-5.6 10.2 7.7 -9.2 5.75 9.5-11.6 15.1 9.5-13.5 15 - 18 11.5-15 26.0 20 - 23 15.5 - 20 13 - 15.5 22.5 26 20 - 23 15 - 18 34 28 - 32 24 - 28 20 - 23
5-1/2
17 - 20 13-15.5
6-5/8 7 6-5/8 7 6-5/8 7 6-5/8
7
7-5/8
8-5/8
9-5/8
28 - 32 24 - 28 38 17 - 20 3 2 - 35 24 38 17 - 20 32 - 35 26 - 29 20 - 26 17 - 20 33.7-39 24-29.7 20 - 24 44 - 49 32 - 40 20 - 28 47 - 53.5 40 - 47 29.3 - 36
Packer Size
Preferred Range of Casing ID’s Min Max
Gage and Guide Ring OD
Packing Element OD
Packing Element Spacer OD
2.234
2-1/8
-
2-5/16
-
28A 28A Hi-Temp 28B 35A 35B 35C 41A 41B 43A 43B
2.442 2.834 2.923 3.069 3.428 3.754 3.910 4.250
2.563 2.922 3.068 3.188 3.548 3.826 4.090 4.408
2.357 2.782 2.844 3.038 3.303 3.620 3.786 4.140
2-3/4
2.782
3 3-9/32 3-19/32 3-5/8 3-15/16
43C
4.408
4.560
4.265
45A2 45A4
4.625 4.778
4.778 4.950
45B
4.950
45C 45D 45E2 45E4 45EF 45A2 (2-3/8) 45A4 (2-3/8) 45B (2-3/8) 46A2
2.347
2.441
Abs ol ute L im it s of Slip and Butto n Travel Min Max 2.316
2.466
3.038 3.303 3.620 3.771 4.125
2.438 2.834 2.896 3.038 3.304 3.620 3.895 4.211
2.570 2.956 3.080 3.222 3.638 3.878 4.105 4.409
4-5/32
4.250
4.363
4.561
4.515 4.656
4-3/8
4.500
4.543
4.950
5.190
4.796
4-11/16
4.781
4.825
5.196
5.191 5.391 5.561 5.610 5.791
5.390 5.560 5.609 5.791 5.921
5.078 5.171 5.421
4-15/16
5.062
5.059 5.197
5.482 5.620
5-1/4
5.406
5.449
5.791
-
-
5.677
6.035
4.625
4.777
4.515
4.534
4.813
4-3/8
4.500 4.641
4.892
2.330
5.499
4.778
4.892
4.656
4.893
5.044
4.796
5.600
5.791
5.490
46A4
5.791
5.921
5.603
46B
5.922
6.135
5.796
47A2
5.830
5.937
5.671
47A4
5.938
6.135
5.827
47B2 47B4 47C2 47C4 47D2 47D4 49A2 49A4 49B 51A2 51A4 51B
6.136 6.276 6.456 6.579 6.798 7.025 7.511 7.688 7.922 8.343 8.681 8.836
6.276 6.456 6.578 6.797 7.025 7.125 7.687 7.921 8.191 8.681 8.835 9.063
5.939 6.093 6.281 6.468 6.687 6.827 7.327 7.546 7.796 8.233 8.453 8.608
4-11/16
4.781
4.850
5.062
5-3/8
5.475
5.473
5.932
5-1/2
5.781
5.773
6.240
5-1/2
5.656
5.653
6.139
5-3/4
5.968
5.919
6.456
6-1/8
6.266
6.357
6.966
6-1/2
6.672
6.607
7.216
7
7.312
7.301
8.059
7-1/2
7.781
7.798
8.214
7-15/16
8.218
8.169
8.935
8-3/8
8.593
8.548
9.083
Thread Specs Box Up and Pin Down 1.315 OD EU 10 Rd
1.900 OD EU 10 Rd 2-3/8 OD EU 8 Rd
2-3/8 OD EU 8 Rd
2-7/8 OD EU 8 Rd
3-1/2 OD EU 8 Rd
*For use when anticipated well conditions exceed 200 °F and 3,800 psi pressure differential across tool. Packer shown for this weight is recommended and should be run where possible. However, the other size packer listed for this same casing weight may be run under certain circumstances, such as running mixed st rings or in unusual hole conditions.
THIS DOCUMENT IS FOR INTERNAL USE ONLY This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in conjunction with equipment or product. © 8/6/09 Baker Hughes Incorporated.
Unit No. SU 8145 August 6, 2009 Rev. New
Page 7 of 31
P a g e 8 o f 3 1
Spring Identification Guide Drawing No. 333-996
A U u n g i u t s t N 6 o , . 2 S 0 U 0 8 9 1 4 5
R e v . N e w o w H e r T r i u v h s t i h e s o t g h a l h e d l d o , e s e e p o d c i u n o f u t m h r r r e e p r o e i n q l m t a s l e u i i e t o s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c , t b y l u t i w e . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t h u o e q e c c d u w e u , m i d c p r , e o m t i n t u e e s t p n n e i y r t c d s i g o o o t h h r n r e t p s e d d r i p o e r n s d t c o l p a u o o n c f s e d t r . B e t c © a d y o k t n o o f i f 8 e r p B d / 6 H e a e r / n u k 0 s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s u d v a a t g o i i n n o h g e c u d n s m a s i o I e n t f n o B c n e o t e a i d b r s k e e p o n t o r r e o r a t k t H u n t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
T H I S
D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
Dimensional Data Refer to Drawing No. 333-996. Material No. H014860100 H015997100
OD 11/32 .500
Free Length 9/16 17/32
Wire Size .054 .071
o w H e r T r i u v h s t i h e s o t g h a l h e l d d e o , e s d e p o c i u n o f u t m h r r r e e p e l n r o q i m t a s u i l e e o t i s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c t l u b y , t e i w . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t u o h e q e c c d u u w e m , i d c p r e m t i , u n o e t e s t p n n e i y r t c d s g i o o o t h h r n r e t p s e d d r p i o e r a n s d t c o l p n u o c o e d f s t r . B e t c © a d y o k o t o n e f 8 r p f i B d / 6 H e a e r k n / 0 u s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s a u d v a t g o i i h c n n o e u g d n s m a s i o f I n e n t o B c n e e a o t d i b r s k e e p o n t o r r r o k e a H t n t u t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
R e v . N e w
U n
P a g e 9 o f 3 1
A i u t g N u o . s t S 6 U , 2 8 0 1 0 4 9 5
R-3™ Sin gle-Grip Retri evable Casing Packer (Prod uct Family No. H64101) As semb ly an d Di men sion al Data Dr awi ng No . 162-332, Size 28B
T H I S D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
Dimensi onal Data, Size 28B Refer to Drawing No. 162-332. Dim A B C D E F G H J K
Size 28A and 28A Hi-Temp Size 28B 2-7/32 65-3/4 6 11-7/16 1.625 1.050 .750 Refer to Specification Guide 1.315 OD EU 10 Rd 2-5/3 2 2-1/4
P a g e 1 0 o f 3 1
A U u n g i u t s t N 6 o , . 2 S 0 U 0 8 9 1
R-3™ Sing le-Grip Retrievable Casing Packer (Prod uct Famil y No. H64101) Parts Lis t, Size 28 Refer to Drawing No. 162-332. Item No.
4 5
R e v . N e w o w H e r T r i u v h s t i h e s o t g h a l h e d l d o , e s e e p o d c i u n o f u t m h r r r e e p r o e i n q l m t a s l e u i i e t o s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c , t b y l u t i w e . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t h u o e q e c c d u w e u , m i d c p r , e o m t i n t u e e s t p n n e i y r t c d s i g o o o t h h r n r e t p s e d d r i p o e r n s d t c o l p a u o o n c f s e d t r . B e t c © a d y o k t n o o f i f 8 e r p B d / 6 H e a e r / n u k 0 s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s u d v a a t g o i i n n o h g e c u d n s m a s i o I e n t f n o B c n e o t e a i d b r s k e e p o n t o r r e o r a t k t H u n t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
T H I S
D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
No. Req’d
Description
1 2 3 4 5 6 7
Top Sub Seal Adjusting Nut Seal Ring Body Seal Sub O-ring Gage Ring
1 1 1 1 1 1 1
8
Packing Element
9 10 11 12 13 14 15 16 17
Support Sleeve Guide Ring Cone Connector Sleeve Nut Connector Sleeve Slip Outer Slip Spring Inner Slip Spring Slip Ring
1 1 1 1 1 4 4 4 1
18
Half Dog Pt. Set Screw
1
19 20 -
Slip Stop Ring Bottom Sub Support Sleeve Assy.Tool
1 1 1
80-Hard 90-Hard
1
Size and Material No. Size 28A Size 28A Size 28B Hi-Temp H015121300 H014833000 H016215700 H016216600 H016519500 H016519600 HWWB222H40 H016507300 H016226400 H014833700 H016112800 H015712500 H016210400 H014834800 H016507200 H016226500 H015816200 H016226100 H016226200 H016226000 H015379000 H015563100 H015997100 H014860100 H015417200 HWWG7180B0 (1/4-20 x 5/16 lg) H016226600 H016226700 H014835400
o w H e r T r i u v h s t i h e s o t g h a l h e l d d e o , e s d e p o c i u n o f u t m h r r r e e p e l n r o q i m t a s u i l e e o t i s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c t l u b y , t e i w . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t u o h e q e c c d u u w e m , i d c p r e m t i , u n o e t e s t p n n e i y r t c d s g i o o o t h h r n r e t p s e d d r p i o e r a n s d t c o l p n u o c o e d f s t r . B e t c © a d y o k o t o n e f 8 r p f i B d / 6 H e a e r k n / 0 u s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s a u d v a t g o i i h c n n o e u g d n s m a s i o f I n e n t o B c n e e a o t d i b r s k e e p o n t o r r r o k e a H t n t u t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
R e v . N e w
U n
P a g e 1 1 o f 3 1
A i u t g N u o . s t S 6 U , 2 8 0 1 0 4 9 5
Spring Identification Drawing No. 333-996
T H I S D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
Dimensional Data Refer to Drawing No. 333-996. Material No. H014860100 H015997100
OD 11/32 .500
Free Length 9/16 17/32
Wire Size .054 .071
P a g e 1 2 o f 3 1
R-3™ Sing le-Grip Retrievable Casing Packer (Prod uct Famil y No. H64101)
A U u n g i u t s t N 6 o , . 2 S 0 U 0 8 9 1
As sem bl y an d Di mens ion al Data Dr awi ng No. 162-333, Sizes 35 and 41
4 5
R e v . N e w o w H e r T r i u v h s t i h e s o t g h a l h e d l d o , e s e e p o d c i u n o f u t m h r r r e e p r o e i n q l m t a s l e u i i e t o s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c , t b y l u t i w e . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t h u o e q e c c d u w e u , m i d c p r , e o m t i n t u e e s t p n n e i y r t c d s i g o o o t h h r n r e t p s e d d r i p o e r n s d t c o l p a u o o n c f s e d t r . B e t c © a d y o k t n o o f i f 8 e r p B d / 6 H e a e r / n u k 0 s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s u d v a a t g o i i n n o h g e c u d n s m a s i o I e n t f n o B c n e o t e a i d b r s k e e p o n t o r r e o r a t k t H u n t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
T H I S
D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
Dimensi onal Data, Sizes 35 and 41 Refer to Drawing No. 162-333. Dim A B C D E F G H J K
Size 35 2.764
41 3.140
68-3/8 5-5/16 19-9/16 2.095 2.490 1.660 1.900 1.375* 1.500* Refer to Specification Guide 1.900 OD EU 10Rd 2-3/8 OD EU 8Rd 2-3/4 3-3/16
*Alternate Body ID Size 35 - 1.125, Size 41 - 1.250.
o w H e r T r i u v h s t i h e s o t g h a l h e l d d e o , e s d e p o c i u n o f u t m h r r r e e p e l n r o q i m t a s u i l e e o t i s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c t l u b y , t e i w . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t u o h e q e c c d u u w e m , i d c p r e m t i , u n o e t e s t p n n e i y r t c d s g i o o o t h h r n r e t p s e d d r p i o e r a n s d t c o l p n u o c o e d f s t r . B e t c © a d y o k o t o n e f 8 r p f i B d / 6 H e a e r k n / 0 u s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s a u d v a t g o i i h c n n o e u g d n s m a s i o f I n e n t o B c n e e a o t d i b r s k e e p o n t o r r r o k e a H t n t u t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
R e v . N e w
P a g e 1 3 o f 3 1
U n A i u t g N u o . s t S 6 U , 2 8 0 1 0 4 9 5
R-3™ Sin gle-Grip Retri evable Casing Packer (Prod uct Family No. H64101) Parts Lis t, Sizes 35 and 41 Refer to Drawing No. 162-333. Item No. T H I S D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
Description
No. Req’d
1
Top Sub
1
2 3
Seal Adjusting Nut Seal Ring
1
4
Body
Standard Alternate*
1 1
5 6 7 8 9 10 11 12 13 14 15 16 17
Seal Sub O-ring Gage Ring End Packing Element Center Packing Element Packing Element Spacer Support Sleeve Guide Ring Cone Connector Sleeve Nut Connector Sleeve Slip Slip Retaining Ring
18
Slip Spring
19 20 21 22
Slip Ring Split Ring Half Dog Pt. Set Screw Up Stop Ring
1
23
Bottom Sub
1
1 1 1 2 1 2 1 1 1 1 1 6 1 6 12 1 1 1
Size and Material No. 35B 35C 41A 41B H015204200 H015206600 (1.900 OD EU 10 Rd) (2-3/8 OD EU 8 Rd) H015204500 H015207500 H016215800 H016215900 H016212800 H016202900 H016278600 H016278700 H016023900 H016228800 HWWB226H40 HWWB228H40 H016517500 H016517600 H016517700 H016518500 H016518600 H016242900 H016269100 H016263000 H016263200 H015410500 H015410700 H015411900 H015412000 H016518100 H016518200 H016518900 H016519000 H015411600 H015412700 H016517800 H016517900 H016518000 H016518700 H016518800 H016213000 H015206000 H016213200 H016203100 H016213100 H016203000 H016150000 H016150100 H016150200 H020816400 H013565000 H016213300 H016213400 H015207300 H013972200 H016207800 H016213500 H016213600 H015205900 H015204800 H015207200 HWWG7180F0 (1/4-20 x 7/16 lg) H016213700 H016203300 H016213800 H016203200 (1.900 OD EU 10 Rd) (2-3/8 OD EU 8 Rd) H015306700 H015306800 35A
Support Sleeve Assy. Tool 1 *Alternate Body with reduced OD and ID for greater bypass is available upon request.
P a g e 1 4 o f 3 1
Spring Identif icati on Guid e Drawin g No. 333-996
A U u n g i u t s t N 6 o , . 2 S 0 U 0 8 9 1 4 5
R e v . N e w o w H e r T r i u v h s t i h e s o t g h a l h e d l d o , e s e e p o d c i u n o f u t m h r r r e e p r o e i n q l m t a s l e u i i e t o s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c , t b y l u t i w e . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t h u o e q e c c d u w e u , m i d c p r , e o m t i n t u e e s t p n n e i y r t c d s i g o o o t h h r n r e t p s e d d r i p o e r n s d t c o l p a u o o n c f s e d t r . B e t c © a d y o k t n o o f i f 8 e r p B d / 6 H e a e r / n u k 0 s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s u d v a a t g o i i n n o h g e c u d n s m a s i o I e n t f n o B c n e o t e a i d b r s k e e p o n t o r r e o r a t k t H u n t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
T H I S
D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
Dimensional Data Refer to Drawing No. 333-996. Material No. H015392400 H015526600 H075759700 H013954200 H015039200 H065915000 H015825000 H015225100 H013972200
OD
39/64 47/64 3-11/16 4-7/16 3-1/4 35/64 43/64
Free Length 55/64 1-7/32 55/64 1-7/32 2-3/4 3-7/8 3-1/32 9/16 1-1/16
Wire Size
062 x .125 071 x .153 1/4 Rd 3/16 Rd .065 .071
o w H e r T r i u v h s t i h e s o t g h a l h e l d d e o , e s d e p o c i u n o f u t m h r r r e e p e l n r o q i m t a s u i l e e o t i s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c t l u b y , t e i w . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t u o h e q e c c d u u w e m , i d c p r e m t i , u n o e t e s t p n n e i y r t c d s g i o o o t h h r n r e t p s e d d r p i o e r a n s d t c o l p n u o c o e d f s t r . B e t c © a d y o k o t o n e f 8 r p f i B d / 6 H e a e r k n / 0 u s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s a u d v a t g o i i h c n n o e u g d n s m a s i o f I n e n t o B c n e e a o t d i b r s k e e p o n t o r r r o k e a H t n t u t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
R e v . N e w
U n
P a g e 1 5 o f 3 1
A i u t g N u o . s t S 6 U , 2 8 0 1 0 4 9 5
R-3™ Doub le-Grip Retri evable Casing Packer (Prod uct Famil y No. H64201) As semb ly an d Di men si on al Dat a Draw ing No. 165-234, Sizes 43 - 47
T H I S D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
P a g e 1 6 o f 3 1
R-3™ Doub le-Grip Retri evable Casing Packer (Prod uct Famil y No. H64201)
A U u n g i u t s t N 6 o , . 2 S 0 U 0 8 9 1
Dimensional Data, Sizes 43 - 47 Refer to Drawing No. 165-234.
4 5
R e v . N e w o w H e r T r i u v h s t i h e s o t g h a l h e d l d o , e s e e p o d c i u n o f u t m h r r r e e p r o e i n q l m t a s l e u i i e t o s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c , t b y l u t i w e . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t h u o e q e c c d u w e u , m i d c p r , e o m t i n t u e e s t p n n e i y r t c d s i g o o o t h h r n r e t p s e d d r i p o e r n s d t c o l p a u o o n c f s e d t r . B e t c © a d y o k t n o o f i f 8 e r p B d / 6 H e a e r / n u k 0 s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s u d v a a t g o i i n n o h g e c u d n s m a s i o I e n t f n o B c n e o t e a i d b r s k e e p o n t o r r e o r a t k t H u n t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
Dim T H I S
D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
J K
A B C D E F G H H64101 H64201 H64101 H64201 L M
43
45
3.625 3.750 3.719 2.250 1.850*
Size 45 x 2-3/8
46 4.000 4.250 5.250
4.500 2.375 2.750 2.875 1.969 2.375 2.438 Refer to Specification Guide 4.594 5.750 5.375 7.062 8.250 16.50 19.94 16.94 21.00 30.00 32.00 30.00 35.50 67.00 68.38 74.0 84.00 84.12 87.00 96.00 2-3/8 OD EU 8 Rd 2-7/8 OD EU 8 Rd 45AB A2 4.500 4.500 3.750 5250 45CDEF A4 and B 4.625 5.000
*1.969 ID available when ordered only.
47
5.500 2.416 5.750 21.38 35.75 74.12 96.12 AB 5.500 CD 6.187
o w H e r T r i u v h s t i h e s o t g h a l h e l d d e o , e s d e p o c i u n o f u t m h r r r e e p e l n r o q i m t a s u i l e e o t i s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c t l u b y , t e i w . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t u o h e q e c c d u u w e m , i d c p r e m t i , u n o e t e s t p n n e i y r t c d s g i o o o t h h r n r e t p s e d d r p i o e r a n s d t c o l p n u o c o e d f s t r . B e t c © a d y o k o t o n e f 8 r p f i B d / 6 H e a e r k n / 0 u s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s a u d v a t g o i i h c n n o e u g d n s m a s i o f I n e n t o B c n e e a o t d i b r s k e e p o n t o r r r o k e a H t n t u t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
R e v . N e w
P a g e 1 7 o f 3 1
U n A i u t g N u o . s t S 6 U , 2 8 0 1 0 4 9 5
R-3™ Doub le-Grip Retri evable Casing Packer (Prod uct Famil y No. H64201) Parts List, Sizes 43 - 47 Refer to Drawing No. 165-234. Item No. 4
T H I S D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
--
5 6 7 8 9
Description
Body Special Body with 1.969 ID
No. Req’d
1
43
45
H035253300 H024044603
H014960500
1
43A: H016030000 43B: H016030100 43C: H016030200
1 1 1
H015041400 H015210700 HWWB234H40
1
H015825000
H015039200
1
HWWB232H40
Piston Retainer
H015258200 [4]
Piston Retainer (Alternate)*
H015826900 [4]
Flat Hd Soc Cap Screw
9
-
Flat Hd Slotted Cap Screw Stainless Steel
12
HWWGD0B0D1 (10-32 x 3/8 lg)
Balance Sleeve Balance Sleeve Housing O-ring Balance Sleeve Spring O-ring
10
11
12
Piston
43A: H015230900 43B: H015231000 43C: H015231100 [8]
13
O-ring
HWWB125H40 [8]
14
Piston Spring
H015225100 [16]
15
O-ring
1
HWWB145H40
16
Receptacle
1
H015258100
NOTE: Refer to Single-Grip Parts List for reminder of parts.
46
H024099500
47
H027577700 --
45A: H016015800 45B: H016015900 45CD: H016016000 45E: H016016100 45EF: H018909800 H014960300 H014783700 HWWB340H40
Double Grip Receptacle Sub Assy. consists of Items 5 thru 16
Size and Material No. 45 x 2-3/8
45A2: H016813600 45A4: H016857400 45B:
46A: H016030300 46B: H016030400
47A: H016016200 47B: H016016300 47CD: H016016400
H016560600 H016560700 HWWB342H40
H014960600 H015130400 H014780600 HWWB346H40
H016580800
H065915000
HWWB337H40 HWWB339H40 45AB: H014973800 45CDE: H015827100 H014973800 45EF: H015827100 [3] [3] 45AB: H015827000 45CDE: H015827100 H015827000 45EF: H015827100 [3] [3] HWWG11B0H1 (5/16-18 x 1/2 lg)
HWWB342H40 H015258300 [3]
47AB: H014973900 47CD: H015136300 [3]
H015827200 [3]
47AB: H015827300 47CD: H015827900 [3]
HWWG11B0M1 (5/16-18 x 5/8 lg)
-
46A: H014391500 46B: H014391600 [6]
47A: H014391500 47B: H014391600 47CD: H014391700 [6]
45A: H015396600 45B: H015396700 45A2: H016560400 45CD: H015396800 45A4: H016848200 45E: H015396900 45B: H016848200 45EF: H015397000 [6] [6] HWWB224H40 [6] 45AB: H015392400 45CDE: H015526600 H015392400 45EF: H015526600 [12] [12] HWWB234H40 45AB: H014783500 45A2: H016560500 45CDE: H015136800 45A4: H016875600 45EF: H015136800 45B: H016875600
HWWB230H40 [6] H014148600 [12]
47AB: H014148600 47CD: H013954200 [12]
HWWB239H40
HWWB241H40
H015258000
47AB: H014781500 47CD: H015135000
P a g e 1 8 o f 3 1
Parts List, Sizes 43 - 47
A U u n g i u t s t N 6 o , . 2 S 0 U 0 8 9 1
Refer to Drawing No. 165-234. Item No.
o w H e r T r i u v h s t i h e s o t g h a l h e d l d o , e s e e p o d c i u n o f u t m h r r r e e p r o e i n q l m t a s l e u i i e t o s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c , t b y l u t i w e . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t h u o e q e c c d u w e u , m i d c p r , e o m t i n t u e e s t p n n e i y r t c d s i g o o o t h h r n r e t p s e d d r i p o e r n s d t c o l p a u o o n c f s e d t r . B e t c © a d y o k t n o o f i f 8 e r p B d / 6 H e a e r / n u k 0 s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s u d v a a t g o i i n n o h g e c u d n s m a s i o I e n t f n o B c n e o t e a i d b r s k e e p o n t o r r e o r a t k t H u n t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
No. Req’d
*When using Restraining Pins, the alternate Piston Retainer is required. Number in [ ] brackets indicates number required.
4 5
R e v . N e w
Description
T H I S
D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
43
45
Size and Material No. 45 x 2-3/8
46
47
o w H e r T r i u v h s t i h e s o t g h a l h e l d d e o , e s d e p o c i u n o f u t m h r r r e e p e l n r o q i m t a s u i l e e o t i s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c t l u b y , t e i w . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t u o h e q e c c d u u w e m , i d c p r e m t i , u n o e t e s t p n n e i y r t c d s g i o o o t h h r n r e t p s e d d r p i o e r a n s d t c o l p n u o c o e d f s t r . B e t c © a d y o k o t o n e f 8 r p f i B d / 6 H e a e r k n / 0 u s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s a u d v a t g o i i h c n n o e u g d n s m a s i o f I n e n t o B c n e e a o t d i b r s k e e p o n t o r r r o k e a H t n t u t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
R e v . N e w
R-3™ Singl e- and Doubl e-Grip Retrievable Casing Packer (Prod uct Famil y Nos . H64101 and H64201) Parts List, Sizes 43 - 47 Refer to Drawing No. 165-234. Item No. 1 2 3
P a g e 1 9 o f 3 1
Gage Ring
1
21
Long Packing Element
2
22
Packer Element Spacer
2
23
Short Packing Element
1
U n
20
A i u t g N u o . s t S 6 U , 2 8 0 1 0 4 9 5
1 1 1
17
F O R I N T E R N A L U S E O N L Y
No. Req’d
Top Sub Seal Adjusting Nut Seal Body Body with1.969 ID Seal Sub O-ring
T H I S D O C U M E N T I S
Description
18 19
1 1 1
Size and Material No. Size 43 Size 45 Size 45 x 2-3/8 Size 46 Size 47 H014783410 (2-3/8 OD EU 8Rd) H014780410 (2-7/8 OD EU 8 Rd) H016500000 H014551700 H014560500 H014453200 H016551900 H014635800 H016561300 H014691000 H015041100 H015906100 H015906200 H016561200 H015906300 H015906400 HWWB145H40 HWWB234H40 HWWB329H40 HWWB241H40 A2: H016048400 A2: H016049200 A4: H016048500 A4: H016049300 B: H016048600 B2: H016049400 A: H016047900 A2: H016048400 A2: H016509600 C: H016048700 B4: H016379700 B: H016048200 A4: H016048500 A4: H016509700 D: H016048800 C2: H016049500 C: H016048300 B: H016048600 B: H016509800 E2: H016049000 C4: H016049600 E4: H016049100 D2: H016049700 EF: H016049100 D4: H016049800 A: H015889800 A: H015890400 A: H015889500 B: H015889900 A: H016560100 A: H016509900 B: H015890500 B: H015889600 CD: H015890100 B: H016845400 B: H016510000 C: H015890700 C: H015889700 E: H015890200 D: H015890900 EF: H015890200 A: H016948200 A: H016949700 A: H016948800 B: H016949100 A: H016949400 A: H016949500 B: H016948300 B: H016948900 CD: H016949200 B: H016956100 B: H016949600 C: H016949800 C: H016949000 E: H016949300 D: H016949900 EF: H016949300 A: H015888100 A: H015888800 A: H015887600 B: H015888000 A: H016560200 A: H016510600 B: H015889000 B: H015887700 CD: H015888400 B: H016845500 B: H016510700 C: H015889200 C: H015887800 E: H015888600 D: H015889300 EF: H015888600
For other available threads, specify first seven digits of number shown and specific threads desired These parts used on Single-Grip packer only. All other parts used f or Single and Double-Grip packers.
* Previous Slip, Material No. H013625100, may still be used until stock is depleted. ** Alternate Slip Stop Rings with left-hand J-Slot are available for sizes shown. Number in [ ] brackets indicates number required.
P a g e 2 0 o f 3 1
R-3™ Singl e- and Doubl e-Grip Retrievable Casing Packer (Prod uct Famil y Nos . H64101 and H64201)
A U u n g i u t s t N 6 o , . 2 S 0 U 0 8 9 1
Parts Lis t, Sizes 43 - 47 (Cont inu ed) Refer to Drawing No. 165-234. Item No.
4 5
R e v . N e w o w H e r T r i u v h s t i h e s o t g h a l h e d l d o , e s e e p o d c i u n o f u t m h r r r e e p r o e i n q l m t a s l e u i i e t o s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c , t b y l u t i w e . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t h u o e q e c c d u w e u , m i d c p r , e o m t i n t u e e s t p n n e i y r t c d s i g o o o t h h r n r e t p s e d d r i p o e r n s d t c o l p a u o o n c f s e d t r . B e t c © a d y o k t n o o f i f 8 e r p B d / 6 H e a e r / n u k 0 s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s u d v a a t g o i i n n o h g e c u d n s m a s i o I e n t f n o B c n e o t e a i d b r s k e e p o n t o r r e o r a t k t H u n t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
T H I S
D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
Description
No. Req’d
Size 43
24
Guide Ring
1
A: H016049900 B: H016050200 C: H016050300
25 26 27
Support Sleeve Connector Sleeve Cone
1 1 1
H014978300 H015040900 H014974800
28
Slip
6
A: H020816400* B: H013565000 C: H013564300
29
Slip Retaining Ring
1
30
Slip Spring
31 32 32A 33 34
35
Slip Ring Slip Stop Ring Slip Stop Ring With Left-hand J-Slot Snap Ring
1 1 1 1
Nylok Soc Hd Cap Screw
2
Bottom Sub
1
36
Split Ring
37
Half Dog Pt Hex Soc Set Screw
2
38
Connector Sleeve Nut
1
2 Seg
H013739100 A: H013972200 BC: H013954200 [6] H015040700 H027539800 H024310600 -
Size 45 A2: H016050400 A4: H016050500 B: H016050600 C: H016050700 D: H016050800 E2: H016051000 E4: H016051100 EF: H016051100 H016223000 H014636800 H014635900 A: H035968500 B: H013885300 C: H014112900 D: H014113000 E: H014119900 EF: H014753900 H013631900 H013954200 [12]
For other available threads, specify first seven digits of number shown and specific threads desired These parts used on Single-Grip packer only. All other parts used for Single and Double-Grip packers.
* Previous Slip, Material No. H013625100, may still be used until stock is depleted. ** Alternate Slip Stop Rings with left-hand J-Slot are available for sizes shown. Number in [ ] brackets indicates number required.
Size 46
A2: H016560000 A4: H016845600 B: H016845200
A2: H016510100 A4: H016510200 B: H016510300
H016559900 H016559700 H016559800
H015200100 H014692000 H015129300
A: H020816400* B: H013565000
A: H013885300 B: H014112900
A: H013998300 B: H013791900 C: H014164700 D: H014164900
H016559500 A: H013972200 B: H013954200 [6] H016559400 H016559300 H016559600
H015129200
H013631800
H014635600 **H015127400 H024051100 H014636200 HWWG11B183 (5/16-18 x 1- 1/4 lg) H015127510 H016559100 (2-3/8 OD EU 8 Rd) (2-7/8 OD EU 8 Rd) H015040800 H016580000 HWWG7180H0 HWWG7180H0 (1/4-20 x 1/2 lg) (1/4-20 x 1/2 lg) H015040600 --
Size and Material No. Size 45 x 2-3/8
Size 47 A2: H016051200 A4: H016051300 B2: H016051400 B4: H016397300 C2: H016051500 C4: H016051600 D2: H016051700 D4: H016051800 H014899700 H028129800 H014691400
H013954200 [12] H015129100 H014692400 H015129000 **H015128700 H024051200 H014691200 HWWG11B1H3 (5/16-18 x 1-1/2 lg) H015128810 (2-7/8 OD EU 8 Rd) -
o w H e r T r i u v h s t i h e s o t g h a l h e l d d e o , e s d e p o c i u n o f u t m h r r r e e p e l n r o q i m t a s u i l e e o t i s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c t l u b y , t e i w . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t u o h e q e c c d u u w e m , i d c p r e m t i , u n o e t e s t p n n e i y r t c d s g i o o o t h h r n r e t p s e d d r p i o e r a n s d t c o l p n u o c o e d f s t r . B e t c © a d y o k o t o n e f 8 r p f i B d / 6 H e a e r k n / 0 u s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s a u d v a t g o i i h c n n o e u g d n s m a s i o f I n e n t o B c n e e a o t d i b r s k e e p o n t o r r r o k e a H t n t u t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
R e v . N e w
U n
P a g e 2 1 o f 3 1
A i u t g N u o . s t S 6 U , 2 8 0 1 0 4 9 5
R-3™ Singl e- and Doubl e-Grip Retrievable Casing Packer (Prod uct Famil y Nos . H64101 and H64201) Al ter nate Par ts , Sizes 43 - 47 (when o rdered onl y) Description
T H I S D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
Long Packing Element 80 HD
Long Packing Element 95 HD
Short Packing Element 60 HD
Short Packing Element 80 HD
No. Req’d
Size 43
2
A: H015889501 B: H015889601 C: H016399600
2
A: H015889502 B: H015889602 C: H016399900
1
A: H015887601 B: H015887701 C: H016531700
1
A: H015887602 B: H015887702 C: H016531800
Size 45
A: H015889802 B: H015889901 CD: H016400200 E: H016400300 EF: H016400300 A: H015889803 B: H015889903 CD: H016400700 E: H016400800 EF: H016400800 A: H015888102 B: H015888002 CD: H016532300 E: H016532500 EF: H016532500 A H015888101 B H015888001 CD: H016532400 E: H016532600 EF: H016532600
Size 45 x 2-3/8
Size 46
Size 47
A: H016560102
A: H016534700 B: H016534900
A: H015890401 B: H015890502 C: H016401200 D: H016401300
A: H016560103 B: H016845403
A: H016534800 B: H016535000
A: H015890402 B: H015890503 C: H016401600 D: H016401700
-
A: H016534300 B: H016534500
A: H015888801 B: H015889002 C: H016533100 D: H016533300
A: H016560201 B: H016845501
A: H016534400 B: H016534600
A: H015888802 B: H015889001 C: H016533200 D: H016533400
P a g e 2 2 o f 3 1
Spring Identification Guide Drawing No. 333-996
A U u n g i u t s t N 6 o , . 2 S 0 U 0 8 9 1 4 5
R e v . N e w o w H e r T r i u v h s t i h e s o t g h a l h e d l d o , e s e e p o d c i u n o f u t m h r r r e e p r o e i n q l m t a s l e u i i e t o s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c , t b y l u t i w e . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t h u o e q e c c d u w e u , m i d c p r , e o m t i n t u e e s t p n n e i y r t c d s i g o o o t h h r n r e t p s e d d r i p o e r n s d t c o l p a u o o n c f s e d t r . B e t c © a d y o k t n o o f i f 8 e r p B d / 6 H e a e r / n u k 0 s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s u d v a a t g o i i n n o h g e c u d n s m a s i o I e n t f n o B c n e o t e a i d b r s k e e p o n t o r r e o r a t k t H u n t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
T H I S
D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
Dimensional Data Refer to Drawing No. 333-996. Material No. H013954100
OD 25/32
Free Length 1-15/16
Wire Size .71 x .153
o w H e r T r i u v h s t i h e s o t g h a l h e l d d e o , e s d e p o c i u n o f u t m h r r r e e p e l n r o q i m t a s u i l e e o t i s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c t l u b y , t e i w . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t u o h e q e c c d u u w e m , i d c p r e m t i , u n o e t e s t p n n e i y r t c d s g i o o o t h h r n r e t p s e d d r p i o e r a n s d t c o l p n u o c o e d f s t r . B e t c © a d y o k o t o n e f 8 r p f i B d / 6 H e a e r k n / 0 u s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s a u d v a t g o i i h c n n o e u g d n s m a s i o f I n e n t o B c n e e a o t d i b r s k e e p o n t o r r r o k e a H t n t u t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
R e v . N e w
U n
P a g e 2 3 o f 3 1
A i u t g N u o . s t S 6 U , 2 8 0 1 0 4 9 5
R-3™ Doub le-Grip Retri evable Casing Packer (Prod uct Famil y No. H64201) As sem bly and Di mens ion al Data Dr awin g No . 165-236, Sizes 49 and 51
T H I S D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
P a g e 2 4 o f 3 1
R-3™ Doub le-Grip Retri evable Casing Packer (Prod uct Famil y No. H64201)
A U u n g i u t s t N 6 o , . 2 S 0 U 0 8 9 1
Dimensi onal Data, Sizes 49 and 51 Refer to Drawing No. 165-236.
4 5
R e v . N e w o w H e r T r i u v h s t i h e s o t g h a l h e d l d o , e s e e p o d c i u n o f u t m h r r r e e p r o e i n q l m t a s l e u i i e t o s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c , t b y l u t i w e . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t h u o e q e c c d u w e u , m i d c p r , e o m t i n t u e e s t p n n e i y r t c d s i g o o o t h h r n r e t p s e d d r i p o e r n s d t c o l p a u o o n c f s e d t r . B e t c © a d y o k t n o o f i f 8 e r p B d / 6 H e a e r / n u k 0 s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s u d v a a t g o i i n n o h g e c u d n s m a s i o I e n t f n o B c n e o t e a i d b r s k e e p o n t o r r e o r a t k t H u n t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
Dim T H I S
D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
J K
A B C D E F G H H64101 H64201 H64101 H64201 L M
Size 49
51
4.500 6.188 6.500 7.250 8.125 4.000 4.500 3.469 3.938 Refer to Specification Guide 3.469 3.500 6.875 9.625 23.25 25.50 44.50 57.62 7. 2 ft 7.4 ft 9.4 ft 9.8 ft 3 -1/2" OD EU 8 Rd 4.688
o w H e r T r i u v h s t i h e s o t g h a l h e l d d e o , e s d e p o c i u n o f u t m h r r r e e p e l n r o q i m t a s u i l e e o t i s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c t l u b y , t e i w . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t u o h e q e c c d u u w e m , i d c p r e m t i , u n o e t e s t p n n e i y r t c d s g i o o o t h h r n r e t p s e d d r p i o e r a n s d t c o l p n u o c o e d f s t r . B e t c © a d y o k o t o n e f 8 r p f i B d / 6 H e a e r k n / 0 u s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s a u d v a t g o i i h c n n o e u g d n s m a s i o f I n e n t o B c n e e a o t d i b r s k e e p o n t o r r r o k e a H t n t u t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
R e v . N e w
U n
P a g e 2 5 o f 3 1
A i u t g N u o . s t S 6 U , 2 8 0 1 0 4 9 5
R-3™ Doub le-Grip Retri evable Casing Packer (Prod uct Famil y No. H64201) Parts Lis t, Sizes 49 and 51 Refer to Drawing No. 165-236.
T H I S D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
Item No. 4 5 6 7 8 9 10
Description
Body Double-Grip Receptacle Subassembly Balance Sleeve Balance Sleeve Housing O-ring Spring O-ring Piston Retainer Piston Retainer (Alternate)*
No. Req’d 1 1 1 1 1 1 1
11
Flat Head Socket Cap Screw
12 13 15 14 16
Piston O-ring O-ring Piston Spring Receptacle
1
17
Hex Soc Cap Screw
2
1
Size and Material No. Size 49 Size 51 H015213200 H016960600 AB: H016030500 AB: H016030600 H015211300 H015428400 H015211200 H015428300 HWWB433H40 HWWB440H40 H015260000 H015428500 HWWB429H40 HWWB432H40 AB: H015534800 [3] AB: H015535000 [4] AB: H015827400 [3] AB: H015827500 [4] HWWG11B0M1 [9] HWWG11B0M1 [12] (5/16-18 x 5/8 lg) (5/16-18 x 5/8 lg) AB: H015211500 [6] AB: H014329200 [8] HWWB236H40 [6] HWWB238H40 [8] HWWB250H40 HWWB436H40 H013954200 [12] H015392500 [24] H015534700 H015534900 HWWG11B0D0 (5/16-18 x 3/8 lg)
*When using Restraining Pins on the Alternate Piston Retainer is required. Number in [ ] brackets indicates number required.
P a g e 2 6 o f 3 1
A U u n g i u t s t N 6 o , . 2 S 0 U 0 8 9 1
R-3™ Sing le- and Dou ble-Grip Retri evable Casing Packers (Prod uct Famil y Nos . H64101 and H64201) Parts Lis t, Sizes 49 and 51 Refer to Drawing No. 165-236.
4 5
R e v . N e w o w H e r T r i u v h s t i h e s o t g h a l h e d l d o , e s e e p o d c i u n o f u t m h r r r e e p r o e i n q l m t a s l e u i i e t o s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c , t b y l u t i w e . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t h u o e q e c c d u w e u , m i d c p r , e o m t i n t u e e s t p n n e i y r t c d s i g o o o t h h r n r e t p s e d d r i p o e r n s d t c o l p a u o o n c f s e d t r . B e t c © a d y o k t n o o f i f 8 e r p B d / 6 H e a e r / n u k 0 s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s u d v a a t g o i i n n o h g e c u d n s m a s i o I e n t f n o B c n e o t e a i d b r s k e e p o n t o r r e o r a t k t H u n t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
Item No.
T H I S
1
F O R I N T E R N A L U S E O N L Y
No. Req’d
Top Sub
1
Seal Adjusting Nut Seal Body Seal Sub O-ring
1 1 1 1 1
21
Gage Ring
1
22
Long Packing Element
2
23
Packing Element Spacer
2
24
Short Packing Element
1
25
Guide Ring
1
26 27 28
Support Sleeve Connector Sleeve Cone
1 1 1
29
Slip
8
30 31 32 33 34 35 36 37 38
Slip Retaining Ring Spring Slip Ring Slip Stop Ring Snap Ring Nylok Socket Head Cap Screw Bottom Sub Hex Soc Set Screw J-Slot Assembly
1 16 1 1 1 4 1 1 1
2 3 18 19 20
D O C U M E N T I S
Description
Size and Material No. Size 49 Size 51 H014959310 H015428110 (3-1/2 EU) (3-1/2 EU) H014712400 H014496200 H014687200 H014470400 H014980000 H015429700 H015906500 H015906600 HWWB250H40 HWWB436H40 A2: H016188600 A2: H016056700 A4: H016188700 A4: H016056800 B: H016188800 B: H016056900 A: H016187700 A: H016141300 B: H016187800 B: H016141400 A: H016950000 A: H016950200 B: H016950100 B: H016950300 A: H016187500 A: H016141500 B: H016187600 B: H016141600 A2: H016188900 A2: H016056700 A4: H016189000 A4: H016056800 B: H016189100 B: H016056900 H014959100 H015428900 H015213300 H015429100 H014959200 H015429000 A: H013786800 A: H013786800 B: H013786900 B: H013786900 H013789500 H013794500 H013954100 H013787300 H013794400 H015706600 H015429300 H014958900 H015429200 HWWG11H1H3 (1/2-13 x 1-1/2 lg) H015212110 (3-1/2 EU) H015429410 (3-1/2 EU) HWWG518080 (1/4-20 x 1/4 lg) H015212000 H015429500
These parts used on Single-Grip Packer only. All other parts used for Single and Double-Grip Packers.
o w H e r T r i u v h s t i h e s o t g h a l h e l d d e o , e s d e p o c i u n o f u t m h r r r e e p e l n r o q i m t a s u i l e e o t i s e s n o f t d a e t h a n o e n p u d r d r i p n d o m o c o c c a s n o u y e t n m s a n j i u e o n n n t o n s c t l u b y , t e i w . n o n t r T p i e h p h u w o i b r s i u o l t i h t d d s h e t u o h e q e c c d u u w e m , i d c p r e m t i , u n o e t e s t p n n e i y r t c d s g i o o o t h h r n r e t p s e d d r p i o e r a n s d t c o l p n u o c o e d f s t r . B e t c © a d y o k o t o n e f 8 r p f i B d / 6 H e a e r k n / 0 u s e t o 9 g i h n r a B e s H l a s n u i n . k f g o e T o h r r h t h e m i a H s s a u d v a t g o i i h c n n o e u g d n s m a s i o f I n e n t o B c n e e a o t d i b r s k e e p o n t o r r r o k e a H t n t u t r u e e r n g d n o . t w e h e c d e d o t s , n o , l s B a o i n a s n t a k d e e n e s d t r i
R e v . N e w
U n
P a g e 2 7 o f 3 1
A i u t g N u o . s t S 6 U , 2 8 0 1 0 4 9 5
R-3™ Sing le- and Doub le-Grip Retri evable Casing Packers (Prod uct Famil y Nos . H64101 and H64201) Al ter nate Par ts , Sizes 49 and 51 Item No.
Description
No. Req’d
Long Packing Element 2
22 T H I S D O C U M E N T I S F O R I N T E R N A L U S E O N L Y
Long Packing Element Short Packing Element 1
24 Short Packing Element
Size and Material No. Size 49 Size 51 A: H016401800 A: H016402200 B: H016401900 B: H016141400 A: H016402000 A: H016402400 B: H016402100 B: H016141402 A: H016533500 A: H016533900 B: H016533700 B: H016141601 A: H016533600 A: H016534000 B: H016533800 B: H016141602
Rework To Adapt Piston Retainers For Use With Restrainin g Pins (Product Family Nos. H64101 and H64201) As sem bl y Dr awin g No . 165-491
Field Rework Size 43 45 46 47 49 51
Piston Retainers to be Reworked to Accommodate Restraining Pins Material Nos. to be Reworked Material Nos. After Rework H015258200 H015826900 AB: H014973800 AB: H015827000 CDE: H015827100 CDE: H015827100 H015258300 H015827200 AB: H014973800 AB: H015827300 CD: H015136300 CD: H015827900 H015534800 H015827400 H015535000 H015827500
NOTE: When a part is reworked, restamp it with new Material Number.
THIS DOCUMENT IS FOR INTERNAL USE ONLY
Unit No. SU 8145 August 6, 2009 Page 28 of 31
Rev. New
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent with the purpose of the document, without t he written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in conjunction with equipment or product. © 8/6/09 Baker Hughes Incorporated.
Restrainin g Pin Assembly Refer to Drawing No. 333-995. When packer is to be run under severe conditions, Restraining Pin assemblies are available, as optional equipment, to provide additional protection against button dulling.
As sem bly Drawi ng No. 333-995
Packer Size 43 49 and 51 45AB 45CDE 46 47AB 47CD
No. Req’d 16 (12 for 49) (24 for 51) 12 12 12 12 12
Pin Assembly Material No. H015826000
Color Yellow
H015642100
Black
H015642000 H015661900 H015825800 H015825800 H015641900
Gold Purple Pink Pink Green
THIS DOCUMENT IS FOR INTERNAL USE ONLY This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in conjunction with equipment or product. © 8/6/09 Baker Hughes Incorporated.
Unit No. SU 8145 August 6, 2009 Rev. New
Page 29 of 31
Installation Instructions 1. Remove the Button Retainer and Springs. 2. Insert the Restraining Pin Assembly from the bottom of the Spring (the Shoe will not go into the Spring ID completely). 3. Install the Spring-Restraining Pin Assembly in the Button. 4. Install the Button Retainer. 5. Adjust the Restraining Pin with a screwdriver (back the pin out until the flange contacts the underside of the Button Retainer, (a) continue turning until the screwdriver blade flares the slotted end of the pin or (b) clip the top of the Restraining Pin off flush with the Button Retainer). NOTE: All springs suitable for use with Restraining Pins are color.
As semb ly In st ru cti ons Double-Grip Packer Slip Subassembly
Refer to Drawing Nos. 165-234 and 165-236. 1. Insert Slip in slot of Slip Ring with Slip Retaining Ring. After Slip is inserted, pull Retaining Ring down slightly and roll Slip Ring over to next open slot and insert next Slip. Repeat until all Slips are installed. Push Slip Ring up under Slips until Slip Retaining Ring shoulders on bottom of Slip Ring. Place Springs in Slips. NOTE: Slips must be angled as far as possible to install Springs. Place Split Ring (Sizes 43 and 45 x 2.38) over Slip Ring. Install Slip Stop Ring on Slip unit with Cap Screws.
2. Make up Bottom Sub onto Body. 3. Slide Snap Ring on Control Sleeve Nut (Size 43 only) and then Slip Subassembly (with Slip Stop Ring toward Bottom Sub) over top end of Body all the way to the Bottom Sub.
5. Move Slip Subassembly up against Cone and install Snap Ring in groove of Connector Sleeve. On Size 43 only, make up Connector Sleeve Nut onto Connector Sleeve. The Slip Subassembly and Cone are now connected by Connector Sleeve and travel should be limited to the length of the Connector Sleeve. 6. Slip the Guide Ring (thread down) over the Support Sleeve (thread up). Install the Packing Elements and Spacers on the Support Sleeve in proper order. 7. Slide Packing Element system over the Body (Guide Ring toward Cone) and make up Guide Ring onto Cone. 8. Make up Gage Ring onto Receptacle. Slide Receptacle over Body and make it up onto Support Sleeve. 9. Install Balance Sleeve into Balance Sleeve Housing by placing the seal end of the Housing on a wooden block. Install O-ring on Balance Sleeve and place the fingers into the box end of the Housing and hit it sharply with a hammer. When the Balance Sleeve fingers collapse into the Housing, strike the seal end of the Housing against the board until the Balance Sleeve snaps into position. 10.Place Balance Sleeve Spring over lower end of Balance Sleeve. Slide the Balance Sleeve assembly over the Body and make it up onto Receptacle. Back off the thread until Piston Retainer grooves line up. 11.Install O-ring in groove on Piston OD. Taking care not to damage O-rings, install Pistons in the Receptacle. DO NOT DRIVE THE PISTONS INTO THE RECEPTACLE -- WORK THEM INTO PLACE. Install Springs and Piston Retainers and secure them with Flat Head Screws. 12.Make up the Seal and Seal Adjusting Nut onto Top Sub and thread Top Sub onto Body.
4. Install Cone over Connector Sleeve and slide Connector Sleeve onto Body with the beveled surface toward Bottom Sub.
THIS DOCUMENT IS FOR INTERNAL USE ONLY
Unit No. SU 8145 August 6, 2009 Page 30 of 31
Rev. New
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent with the purpose of the document, without t he written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in conjunction with equipment or product. © 8/6/09 Baker Hughes Incorporated.
View more...
Comments
