Org Iso Iso Iso Iso Iso Iso Iso Iso Iso

December 22, 2016 | Author: Vandamme Wouter | Category: N/A
Share Embed Donate


Short Description

Download Org Iso Iso Iso Iso Iso Iso Iso Iso Iso...

Description

Org

Doc #

ISO ISO ISO ISO

1 2 3 4

ISO ISO ISO ISO

5-1 5-2 5-3 5-4

Title Geometrical Product Specifications (GPS) - Standard Reference Temperature for Geometrical Product Specification and Verification Second Edition Textiles - Designation of the Direction of Twist in Yarns and Related Products First Edition Preferred Numbers - Series of Preferred Numbers First Edition; PNS 399: 1991 Information and Documentation - Rules for the Abbreviation of Title Words and Titles of Publications Third Edition Photography - Density Measurements - Part 1: Terms, Symbols and Notations Photgraphie - Mesurage des densites - Partie 1: Termes, symboles et notations First Edition Photography - Density Measurements - Part 2: Geometric Conditions for Transmission Density Fourth Edition Photography - Density Measurements - Part 3: Spectral Conditions Second Edition Photography - Density Measurements - Part 4: Geometric Conditions for Reflection Density Second Edition

ISO

6

Photography - Black-and-White Pictorial Still Camera Negative Film/Process Systems - Determination of ISO Speed Second Edition

ISO

7-1 CORR 1

Pipe Threads Where Pressure-Tight Joints Are Made on the Threads - Part 1: Dimensions, Tolerances and Designation Third Edition

ISO

7-1

Pipe Threads Where Pressure-Tight Joints Are Made on the Threads - Part 1: Dimensions, Tolerances and Designation Third Edition

ISO ISO

7-2 8

ISO ISO

9 11

ISO ISO

14 15

Pipe Threads Where Pressure-Tight Joints Are Made on the Threads - Part 2: Verification by Means of Limit Gauges Second Edition Documentation - Presentation of Periodicals First Edition; Erratum-1979 Information and Documentation - Transliteration of Cyrillic Characters into Latin Characters - Slavic and Non-Slavic Languages Second Edition Aircraft - Ground Pressure Testing Connections for Pressure Cabins Second Edition Straight-Sided Splines for Cylindrical Shafts with Internal Centering - Dimensions, Tolerances and Verification Second Edition; JIS B 1601:1996 Rolling Bearings - Radial Bearings - Boundary Dimensions, General Plan Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO

16 17 18 21 22 23 25 26 28

Acoustics - Standard Tuning Frequency (Standard Musical Pitch) First Edition (NZS/ISO 16: 1975) First Edition; NZS/ISO 16: 1975 Guide to the Use of Preferred Numbers and of Series of Preferred Numbers First Edition; PNS 400: 1991 Documentation - Contents List of Periodicals First Edition Shipbuilding - Inland Navigation - Cable-Lifters for Stud-Link Anchor Chains Second Edition Belt Drives - Flat Transmission Belts and Corresponding Pulleys - Dimensions and Tolerances Second Edition Cinematography - Camera Usage of 35 mm Motion-Picture Film - Specifications Second Edition Cinematography - Camera Usage of 16 mm Motion-Picture Film - Specifications Second Edition Cinematography - Projector Usage of 16 mm Motion-Picture Films for Direct Front Projection - Specifications Third Edition Cinematography - Camera Usage of 8 mm Type R Motion-Picture Film - Specifications First Edition

ISO

31-0

ISO ISO ISO ISO ISO

31-5 31-6 31-8 31-9 31-10

Quantities and Units - Part 0: General Principles Third Edition; Amendment 1: 12/15/1998; Amendment 2: 10/1/2005 Quantities and Units - Part 5: Electricity and Magnetism Second Edition; Corrected and Reprinted: 05/15/1993; Amendment 1: 12/15/1998 Quantities and Units - Part 6: Light and Related Electromagnetic Radiations Third Edition; Amendment 1: 12/15/1998 Quantities and Units - Part 8: Physical Chemistry and Molecular Physics Third Edition; Amendment 1: 12/15/1998 Quantities and Units - Part 9: Atomic and Nuclear Physics Third Edition; Amendment 1: 12/15/1998 Quantities and Units - Part 10: Nuclear Reactions and Ionizing Radiations Third Edition; Amendment 1: 12/15/1998

ISO ISO ISO ISO

31-11 31-12 31-13 32

Quantities and Units - Part 11: Mathematical Signs and Symbols for Use in the Physical Sciences and Technology Second Edition Quantities and Units - Part 12: Characteristic Numbers Third Edition; Amendment 1: 12/15/1998 Quantities and Units - Part 13: Solid State Physics Third Edition; Amendment 1: 12/15/1998 Gas Cylinders for Medical Use - Marking for Identification of Content First Edition; Erratum-1979

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

34-1 34-2 35 AMD 1 35 36 37 43 44 45 46 48 49 53 54 60

Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces Second Edition Rubber, vulcanized or thermoplastic ù Determination of tear strength ù Part 2: Small (Delft) test pieces Second Edition Natural rubber latex concentrate ù Determination of mechanical stability AMENDMENT 1: Precision data Fifth Edition Natural rubber latex concentrate ù Determination of mechanical stability Fifth Edition Rubber, Vulcanized or Thermoplastic - Determination of Adhesion to Textile Fabric Fourth Edition Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties Fourth Edition Aircraft - Jacking Pads First Edition Aerospace - Lever-Operated, Two-Position, ON/OFF Switches - Directions of Operation First Edition Aircraft - Pressure Refuelling Connections Second Edition Aircraft - Fuel Nozzle Grounding Plugs and Sockets First Edition Rubber, vulcanized or thermoplastic ù Determination of hardness (hardness between 10 IRHD and 100 IRHD) Fourth Edition Malleable Cast Iron Fittings Threaded to ISO 7-1 Second Edition; Corrigendum 1 02/15/1997 Cylindrical Gears for General and Heavy Engineering - Standard Basic Rack Tooth Profile Second Edition Cylindrical Gears for General Engineering and for Heavy Engineering - Modules Second Edition Plastics - Determination of Apparent Density of Material That Can Be Poured from a Specified Funnel Second Edition

ISO ISO ISO

61 62 65

ISO

68-1

ISO

68-2

Plastics - Determination of Apparent Density of Moulding Material That Cannot Be Poured from a Specified Funnel First Edition Plastics - Determination of Water Absorption Second Edition Carbon Steel Tubes Suitable for Screwing in Accordance with ISO 7/1 Second Edition ISO General Purpose Screw Threads - Basic Profile Part 1: Metric Screw Threads First Edition; This Standard Together with ISO 682 Cancels and Replaces ISO 68 ISO General Purpose Screw Threads - Basic Profile Part 2: Inch Screw Threads First Edition; This Standard Together with ISO 68-1 Cancels and Replaces ISO 68

ISO

69

ISO

70

ISO

71

ISO ISO

74 75-1

ISO

75-2

ISO ISO ISO ISO ISO

75-3 76 78-2 78-3 78-4

ISO

90-1

ISO

90-2

ISO

90-3

ISO ISO ISO ISO ISO ISO

91-1 91-2 92 93-1 93-2 94

ISO

96-1

ISO

96-2

ISO ISO

98 102

Cinematography - 16 mm Motion-Picture and Magnetic Film - Cutting and Perforating Dimensions Third Edition Cinematography - Monophonic 35 mm Negative Photographic Sound Record on 35 mm Motion-Picture Film - Position and Maximum Width Dimensions Second Edition Cinematography - 16 mm Negative Photographic Sound Record on 16 mm, 35/16 mm and 35/32 mm Motion-Picture Film - Positions and Dimensions First Edition Cinematography - Image Area Produced by Camera Aperture and Maximum Projectable Image Area on 8 mm Type R Motion-Picture Film - Positions and Dimensions First Edition Plastics - Determination of Temperature of Deflection under Load - Part 1: General Test Method Second Edition Plastics - Determination of Temperature of Deflection under Load - Part 2: Plastics and Ebonite Second Edition [Superseded By: JSA JIS K 7191-2, JSA JIS K 7191-2] Plastics - Determination of Temperature of Deflection under Load - Part 3: High Strength Thermosetting Laminates and Long-FibreReinforced Plastics Second Edition Rolling Bearings - Static Load Ratings Third Edition Chemistry - Layouts for Standards - Part 2: Methods of Chemical Analysis Second Edition Chemistry - Layouts for Standards - Part 3: Standard for Molecular Absorption Spectrometry First Edition Layouts for Standards - Part 4: Standard for Atomic Absorption Spectrometric Analysis First Edition Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open-Top Cans Second Edition Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 2: General Use Containers Second Edition Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 3: Aerosol Cans Second Edition Petroleum Measurement Tables - Part 1: Tables Based on Reference Temperatures of 15 Degrees C and 60 Degrees F Second Edition Petroleum Measurement Tables - Part 2: Tables Based on a Reference Temperature of 20 Degrees C First Edition Textile Machinery and Accessories - Spinning Machinery - Definition of Side (Left or Right) First Edition Textile Machinery and Accessories - Cylindrical Sliver Cans - Part 1: Main Dimensions Fourth Edition Textile Machinery and Accessories - Cylindrical Sliver Cans - Part 2: Spring Bottoms Third Edition Textile Machinery and Accessories - Spindle Gauges for Ring-Spinning and Ring-Doubling Frames Second Edition Textile Machinery and Accessories - Rings and Travellers for Ring Spinning and Ring Doubling Frames - Part 1: T-Rings and Their Appropriate Travellers First Edition Textile Machinery and Accessories - Rings and Travellers for Ring Spinning and Ring Doubling Frames - Part 2: HZCH-, HZ- and JRings and Their Appropriate Travellers First Edition Textile Machinery and Accessories - Spinning Preparatory and Spinning Machinery - Main Dimensions of Coverings for Top Rollers Third Edition Aircraft - Gravity Filling Orifices Second Edition

ISO

104

ISO

105-A01

Rolling Bearings - Thrust Bearings - Boundary Dimensions, General Plan Third Edition Textiles - Tests for Colour Fastness - Part A01: General Principles of Testing Fifth Edition; CEN EN 20105-A03: 1994; CEN EN ISO 105-A01: 1995; CEN EN 20105-A03: 1994; CEN EN ISO 105-A01: 1995

ISO

105-A02

Textiles - Tests for Colour Fastness - Part A02: Grey Scale for Assessing Change in Colour Fourth Edition; Corrigendum 2: 10/1/2005

ISO

105-A03

ISO

105-A04

ISO ISO ISO ISO

105-A05 105-A06 105-A08 105-B01

ISO ISO

105-B02 105-B03

Textiles - Tests for Colour Fastness - Part A03: Grey Scale for Assessing Staining Fourth Edition; Corrigendum 2: 10/1/2005 Textiles - Tests for Colour Fastness - Part A04: Method for the Instrumental Assessment of the Degree of Staining of Adjacent Fabrics First Edition Textiles - Tests for Colour Fastness - Part A05: Instrumental Assessment of Change in Colour for Determination of Grey Scale Rating First Edition; Corrigendum 1 02/15/1997 Textiles - Tests for Colour Fastness - Part A06: Instrumental Determination of 1/1 Standard Depth of Colour First Edition Textiles - Tests for Colour Fastness - Part A08: Vocabulary Used in Colour Measurement First Edition Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light: Daylight Fifth Edition; Amendment 1-1998 Textiles - Tests for Colour Fastness - Part B02: Colour Fastness to Artificial Light: Xenon Arc Fading Lamp Test Fourth Edition; Amendment 1-1998; Amendment 2-2000 Textiles - Tests for Colour Fastness - Part B03: Colour Fastness to Weathering: Outdoor Exposure Fourth Edition

ISO

105-B04

ISO

105-B05

ISO ISO

105-B06 105-B08

ISO ISO

105-C06 105-C07

ISO

105-C08

ISO ISO

105-C09 105-C10

ISO

Textiles - Tests for Colour Fastness - Part B04: Colour Fastness to Artificial Weathering: Xenon Arc Fading Lamp Test Fourth Edition Textiles - Tests for Colour Fastness - Part B05: Detection and Assessment of Photochromism Fourth Edition; CEN EN ISO 105-B05: 1995 Textiles - Tests for Colour Fastness - Part B06: Colour Fastness and Ageing to Artificial Light at High Temperatures: Xenon Arc Fading Lamp Test Second Edition; Amendment 1: 09/01/2002 Textiles - Tests for Colour Fastness - Part B08: Quality Control of Blue Wool Reference Materials 1 to 7 First Edition Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial Laundering Third Edition; Technical Corrigendum 1: 02/01/2002; Technical Corrigendum 2: 5/15/2002 Textiles - Tests for Colour Fastness - Part C07: Colour Fastness to Wet Scrubbing of Pigment Printed Textiles First Edition Textiles - Tests for Colour Fastness - Part C08: Colour Fastness to Domestic and Commercial Laundering Using a Non-Phosphate Reference Detergent Incorporating a Low Temperature Bleach Activator First Edition; Technical Corrigendum 1: 5/15/2002; Amendment 1: 5/15/2006 Textiles - Tests for Colour Fastness - Part C09: Colour Fastness to Domestic and Commercial Laundering - Oxidative Bleach Response Using a Non-Phosphate Reference Detergent Incorporating a Low Temperature Bleach Activator First Edition; Technical Corrigendum 1: 5/15/2002; Amendment 1: 12/01/2003 Textiles Tests for colour fastness Part C10: Colour fastness to washing with soap or soap and soda First Edition;: 1989

105-C12 CORR 1 Textiles ù Tests for colour fastness ù Part C12: Colour fastness to industrial laundering TECHNICAL CORRIGENDUM 1 First Edition

ISO

105-C12

Textiles Tests for colour fastness Part C12: Colour fastness to industrial laundering First Edition

ISO

105-D01

ISO

105-D02

ISO

105-E01

ISO

105-E02

ISO

105-E03

ISO ISO ISO

105-E04 105-E05 105-E06

ISO ISO

105-E07 105-E08

Textiles - Tests for Colour Fastness - Part D01: Colour Fastness to Dry Cleaning Fourth Edition; CEN EN ISO 105-D01: 1995 Textiles - Tests for Colour Fastness - Part D02: Colour Fastness to Rubbing: Organic Solvents Fourth Edition; CEN EN ISO 105-D02: 1995 Textiles - Tests for Colour Fastness - Part E01: Colour Fastness to Water Fourth Edition; Technical Corrigendum 1: 02/01/2002; CEN EN ISO 105-E01: 1996 Textiles - Tests for Colour Fastness - Part E02: Colour Fastness to Sea Water Fourth Edition; Technical Corrigendum 1: 02/01/2002; CEN EN ISO 105-E02: 1996 Textiles - Tests for Colour Fastness - Part E03: Colour Fastness to Chlorinated Water (Swimming-Pool Water) Third Edition; CEN EN ISO 105-E03: 1996 Textiles - Tests for Colour Fastness - Part E04: Colour Fastness to Perspiration Fourth Edition; Technical Corrigendum 1: 02/01/2002; CEN EN ISO 105-E04: 1996 Textiles - Tests for Colour Fastness - Part E05: Colour Fastness to Spotting: Acid Fourth Edition Textiles Tests for colour fastness Part E06: Colour fastness to spotting: Alkali Fourth Edition Textiles - Tests for Colour Fastness - Part E07: Colour Fastness to Spotting: Water Third Edition; Technical Corrigendum 1: 02/01/2002 Textiles - Tests for Colour Fastness - Part E08: Colour Fastness to Hot Water Third Edition; CEN EN ISO 105-E08: 1996

ISO ISO ISO

105-E09 105-E10 105-E11

ISO

105-E12

Textiles - Tests for Colour Fastness - Part E09: Colour Fastness to Potting Third Edition; Technical Corrigendum 1: 02/01/2002 Textiles - Tests for Colour Fastness - Part E10: Colour Fastness to Decatizing Third Edition; CEN EN ISO 105-E10: 1996 Textiles - Tests for Colour Fastness - Part E11: Colour Fastness to Steaming Third Edition Textiles - Tests for Colour Fastness - Part E12: Colour Fastness to Milling: Alkaline Milling Third Edition; Technical Corrigendum 1: 02/01/2002; Amendment 1: 11/15/2002

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

105-E13 105-E14 105-E16 105-F 105-F01 105-F03 105-F04 105-F05 105-F06 105-F07 105-F10

Textiles - Tests for Colour Fastness - Part E13: Colour Fastness to Acid-Felting: Severe Third Edition; Corrigendum 1: 06/01/1999 Textiles - Tests for Colour Fastness - Part E14: Colour Fastness to Acid-Felting: Mild Third Edition Textiles Tests for colour fastness Part E16: Colour fastness to water spotting on upholstery fabrics First Edition Textiles - Tests for Colour Fastness - Part F: Standard Adjacent Fabrics Third Edition Textiles - Tests for Colour Fastness - Part F01: Specification for Wool Adjacent Fabric First Edition Textiles - Tests for Colour Fastness - Part F03: Specification for Polyamide Adjacent Fabric First Edition Textiles - Tests for Colour Fastness - Part F04: Specification for Polyester Adjacent Fabric First Edition Textiles - Tests for Colour Fastness - Part F05: Specification for Acrylic Adjacent Fabric First Edition Textiles - Tests for Colour Fastness - Part F06: Specification for Silk Adjacent Fabric First Edition Textiles - Tests for Colour Fastness - Part F07: Specification for Secondary Acetate Adjacent Fabric First Edition Textiles - Tests for Colour Fastness - Part F10: Specification for Adjacent Fabric: Multifibre First Edition

ISO ISO ISO

105-G01 105-G02 105-G03

ISO ISO

105-G04 105-J01

ISO

105-J02

ISO

105-J03

ISO

105-J05

ISO

105-N01

ISO

105-N02

ISO ISO ISO

105-N03 105-N04 105-N05

ISO ISO

105-P01 105-P02

ISO

105-S01

ISO

105-S02

ISO

105-S03

ISO

105-X01

ISO ISO ISO

105-X02 105-X04 105-X05

Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen Oxides Second Edition; Corrigendum 1-1995; CEN EN ISO 105-G01: 1995 Textiles - Tests for Colour Fastness - Part G02: Colour Fastness to Burnt-Gas Fumes Second Edition; Corrigendum 1-1995 Textiles - Tests for Colour Fastness - Part G03: Colour Fastness to Ozone in the Atmosphere Second Edition Textiles - Tests for Colour Fastness Part G04: Colour Fastness to Oxides of Nitrogen in the Atmosphere at High Humidities First Edition Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface Colour Fourth Edition Textiles - Tests for Colour Fastness - Part J02: Instrumental Assessment of relative Whiteness Second Edition; Technical Corrigendum 1-1998 Textiles Tests for colour fastness Part J03: Calculation of colour differences First Edition; Technical Corrigendum 1: 06/01/1996; Technical Corrigendum 2: 04/01/2006 Textiles ù Tests for colour fastness ù Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02 First Edition Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: Hypochlorite Second Edition; DIN EN 20105-N01: 1995 Textiles - Tests for Colour Fastness - Part N02: Colour Fastness to Bleaching: Peroxide Second Edition; CEN EN ISO 105-N02: 1995 Textiles - Tests for Colour Fastness - Part N03: Colour Fastness to Bleaching: Sodium Chlorite (Mild) Second Edition; CENELEC EN ISO 105-N04: 1995 Textiles - Tests for Colour Fastness - Part N04: Colour Fastness to Bleaching: Sodium Chlorite (Severe) Second Edition Textiles - Tests for Colour Fastness - Part N05: Colour Fastness to Stoving Second Edition; CEN EN ISO 105-N05: 1995 Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing) Second Edition; CEN EN ISO 105P01: 1995 Textiles - Tests for colour fastness - Part P02: Colour fastness to pleating: Steam pleating Third Edition Textiles - Tests for Colour Fastness - Part S01: Colour Fastness to Vulcanization: Hot Air Second Edition; CEN EN ISO 105-S01: 1995 Textiles - Tests for Colour Fastness - Part S02: Colour Fastness to Vulcanization: Sulfur Monochloride Second Edition; CEN EN ISO 105-S02: 1995 Textiles - Tests for Colour Fastness - Part S03: Colour Fastness to Vulcanization: Open Steam Second Edition; CEN EN ISO 105S03: 1995 Textiles - Tests for Colour Fastness - Part X01: Colour Fastness to Carbonizing: Aluminium Chloride Fourth Edition; CEN EN ISO 105-X01: 1995 Textiles - Tests for Colour Fastness - Part X02: Colour Fastness to Carbonizing: Sulfuric Acid Fourth Edition; CEN EN ISO 105-X02: 1995 Textiles - Tests for Colour Fastness - Part X04: Colour Fastness to Mercerizing Fourth Edition Textiles - Tests for Colour Fastness - Part X05: Colour Fastness to Organic Solvents Fourth Edition

ISO ISO ISO

105-X06 105-X07 105-X08

Textiles - Tests for Colour Fastness - Part X06: Colour Fastness to Soda Boiling Fourth Edition Textiles - Tests for Colour Fastness - Part X07: Colour Fastness to Cross-Dyeing: Wool Fourth Edition Textiles - Tests for Colour Fastness - Part X08: Colour Fastness to Degumming Fourth Edition

ISO

105-X09

ISO

105-X10

Textiles - Tests for Colour Fastness - Part X09: Colour Fastness to Formaldehyde Fourth Edition; CEN EN ISO 105-X09: 1995 Textiles - Tests for Colour Fastness - Part X10: Assessment of Migration of Textile Colours into Polyvinyl Chloride Coatings Fourth Edition; CEN EN ISO 105-X10: 1995

ISO

105-X11

ISO

105-X12

ISO

105-X13

ISO ISO ISO

105-X14 105-X16 105-X18

ISO

105-Z01

ISO ISO ISO ISO ISO

105-Z02 105-Z03 105-Z04 105-Z05 105-Z06

ISO

105-Z07

ISO ISO ISO ISO ISO ISO ISO ISO

105-Z08 105-Z09 105-Z10 105-Z11 108 109 113 115

Textiles - Tests for Colour Fastness - Part X11: Colour Fastness to Hot Pressing Fourth Edition; CEN EN ISO 105-X11: 1996 Textiles - Tests for Colour Fastness - Part X12: Colour Fastness to Rubbing Fifth Edition; Replaces GME 60330 [Replaced: GME GME 60330] Textiles - Tests for Colour Fastness - Part X13: Colour Fastness of Wool Dyes to Processes Using Chemical Means for Creasing, Pleating and Setting Fourth Edition Textiles - Tests for Colour Fastness - Part X14: Colour Fastness to Acid Chlorination of Wool: Sodium Dichloroisocyanurate Third Edition Textiles - Tests for Colour Fastness - Part X16: Colour Fastness to Rubbing - Small Areas First Edition Textiles ù Tests for colour fastness ù Part X18: Assessment of the potential to phenolic yellowing of materials First Edition Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium Salts Second Edition; CEN EN ISO 105-Z01: 1995 Textiles - Tests for Colour Fastness - Part Z02: Colour Fastness to Metals in the Dye-Bath: Iron and Copper Second Edition; CEN EN ISO 105-Z02: 1995 Textiles - Tests for Colour Fastness - Part Z03: Intercompatibility of Basic Dyes for Acrylic Fibres First Edition Textiles - Tests for Colour Fastness - Part Z04: Dispersibility of Disperse Dyes First Edition Textiles - Tests for Colour Fastness - Part Z05: Determination of the Dusting Behaviour of Dyes First Edition Textiles - Tests for Colour Fastness - Part Z06: Evaluation of Dye and Pigment Migration First Edition Textiles - Tests for Colour Fastness Part Z07: Determination of Application Solubility and Solution Stability of Water-Soluble Dyes First Edition Textiles - Tests for Colour Fastness Part Z08: Determination of Solubility and Solution Stability of Reactive Dyes in the Presence of Electrolytes First Edition Textiles - Tests for Colour Fastness Part Z09: Determination of Cold Water Solubility of Water-Soluble Dyes First Edition Textiles - Tests for Colour Fastness - Part Z10: Determination of Relative Colour Strength of Dyes in Solution First Edition Textiles - Tests for Colour Fastness - Part Z11: Evaluation of Speckiness of Colorant Dispersions First Edition Textile Machinery and Accessories - Weaving Looms - Definition of Left and Right Sides First Edition Textile Machinery - Working Widths of Weaving Machines First Edition Rolling Bearings - Plummer Block Housings - Boundary Dimensions Second Edition Unalloyed Aluminium Ingots for Remelting - Classification and Composition First Edition

ISO

119

ISO ISO ISO ISO ISO ISO ISO ISO ISO

120 123 124 125 126 127 128-1 128-20 128-21

ISO ISO ISO ISO

128-22 128-23 128-24 128-25

ISO ISO ISO

128-30 128-34 128-40

ISO

128-44

ISO ISO

128-50 129-1

ISO ISO ISO

132 137 139

ISO

140-1

ISO

140-2

Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Phenols - Iodometric Method First Edition; Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Ammonia and Ammonium Compounds - Colorimetric Comparison Method First Edition Rubber Latex - Sampling Third Edition Latex, Rubber - Determination of Total Solids Content Fourth Edition; Amendment 1: 2/01/2006 Natural Rubber Latex Concentrate - Determination of Alkalinity Fifth Edition Natural rubber latex concentrate Determination of dry rubber content Fifth edition Rubber, Natural Latex Concentrate - Determination of KOH Number Third Edition: Amendment 1: 02/01/2006 Technical Drawings - General Principles of Presentation - Part 1: Introduction and Index First Edition Technical Drawings - General Principles of Presentation - Part 20: Basic Conventions for Lines First Edition Technical Drawings - General Principles of Presentation - Part 21: Preparation of Lines by CAD Systems First Edition Technical Drawings - General Principles of Presentation - Part 22: Basic Conventions and Applications for Leader Lines and Reference Lines First Edition Technical Drawings - General Principles of Presentation - Part 23: Lines on Construction Drawings First Edition Technical Drawings - General Principles of Presentation - Part 24: Lines on Mechanical Engineering Drawings First Edition Technical Drawings - General Principles of Presentation - Part 25: Lines on Shipbuilding Drawings First Edition Technical Drawings - General Principles of Presentation - Part 30: Basic Conventions for Views First Edition; Cancels and Replaces ISO 128:1982 Technical Drawings - General Principles of Presentation - Part 34: Views on Mechanical Engineering Drawings First Edition Technical Drawings - General Principles of Presentation - Part 40: Basic Conventions for Cuts and Sections First Edition Technical Drawings - General Principles of Presentation - Part 44: Sections on Mechanical Engineering Drawings First Edition; Cancels and Replaces ISO 128:1982 Technical Drawings - General Principles of Presentation - Part 50: Basic Conventions for Representing Areas on Cuts and Sections First Edition; Cancels and Replaces ISO 128:1982 Technical drawings Indication of dimensions and tolerances Part 1: General principles First Edition; Supersedes ISO 129 Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) Fourth Edition; Replaces ISO 133:1983 Wool - Determination of Fiber Diameter - Projection Microscope Method First Edition Textiles - Standard Atmospheres for Conditioning and Testing Second Edition Acoustics Measurement of sound insulation in buildings and of building elements Part 1: Requirements for laboratory test facilities with suppressed flanking transmission AMENDMENT 1: Specific requirements on the frame of the test opening for lightweight twin leaf partitions Third Edition; Amendment 1: 12/1/2004 Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 2: Determination, Verification and Application of Precision Data Second Edition; CEN EN 20140-2: 1993; Corrigendum-1993

ISO

140-3

ISO

140-4

ISO

140-5

ISO

140-6

ISO

140-7

ISO

140-8

ISO

140-9

ISO

140-10

ISO

140-11

ISO

140-14 CORR 1

ISO

140-14

ISO

140-16

ISO ISO ISO ISO

140-18 141 142 143

ISO

148-1

ISO

148-2

Acoustics Measurement of sound insulation in buildings and of building elements Part 3: Laboratory measurements of airborne sound insulation of building elements AMENDMENT 1: Installation guidelines for lightweight twin leaf partitions Second Edition; Amendment 1: 12/1/2004 Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 4: Field Measurements of Airborne Sound Insulation between Rooms SEcond Edition Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 5: Field Measurements of Airborne Sound Insulation of Facade Elements and Facades Second Edition Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 6: Laboratory Measurements of Impact Sound Insulation of Floors Second Edition Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 7: Field Measurements of Impact Sound Insulation of Floors Second Edition Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 8: Laboratory Measurements of the Reduction of Transmitted Impact Noise by Floor Coverings on a Heavyweight Standard Floor Second Edition Acoustics - Measurements of Sound Insulation in Buildings and of Building Elements - Part 9: Laboratory Measurement of Room-toRoom Airborne Sound Insulation of a Suspended Ceiling with a Plenum Above It First Edition; CEN EN 20140-9: 1993 Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 10: Laboratory Measurement of Airborne Sound Insulation of Small Building Elements First Edition Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors First edition Acoustics Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the field First Edition Acoustics Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the field First Edition Acoustics Measurement of sound insulation in buildings and of building elements Part 16: Laboratory measurement of the sound reduction index improvement by additional lining First Edition Acoustics Measurement of sound insulation in buildings and of building elements Part 18: Laboratory measurement of sound generated by rainfall on building elements First Edition Textile Machinery and Accessories - Pirn Winders and Cross Winders - Definition of Left and Right Sides First Edition Textile Machinery and Accessories - Weaving Preparatory Machines - Definition of Left and Right Sides First Edition Textile Machinery and Accessories - Weft Pirns for Automatic Looms First Edition Metallic materials Charpy pendulum impact test Part 1: Test method First Edition; Supersedes ISO 148:1983 and ISO 83:1976 Metallic Materials - Charpy Pendulum Impact Test - Part 2: Verification of Test Machines First Edition; Cancels and Replaces ISO/R 442: 1965

Metallic Materials - Charpy Pendulum Impact Test - Part 3: Preparation and Characterization of Charpy V Reference Test Pieces for Verification of Test Machines First Edition Raw, Refined and Boiled Linseed Oil for Paints and Varnishes - Specifications and Methods of Test Second Edition Belt Drives - Pulleys - Limiting Values for Adjustment of Centres Third Edition Coal - Determination of Forms of Sulfur Second Edition Thermoplastics Pipes for the Conveyance of Fluids - Nominal Pressures - Part 1: Metric Series Third Edition Thermoplastics Pipes for the Conveyance of Fluids - Nominal Outside Diameters and Nominal Pressures - Part 2: Inch-Based Series Second Edition Cinematography - Head Gaps and Sound Records for Three-, Four-, or Six-Track Magnetic Sound Records on 35 mm and SingleTrack on 17,5 mm Motion-Picture Film Containing No Picture - Positions and Width Dimensions Second Edition; Replaces ISO 360: 1975 Plastics - Determination of Bulk Factor of Moulding Materials First Edition Plastics - Phenol - Formaldehyde Mouldings - Detection of Free Ammonia First Edition Plastics - Methods of Test for the Determination of the Effects of Immersion in Liquid Chemicals Second Edition Plastics - Determination of Loss of Plasticizers - Activated Carbon Method Second Edition Plastics - Determination of Migration of Plasticizers Second Edition Plastics - Determination of Flexural Properties Fourth Edition; Amendment 1: 02/15/2004

ISO ISO ISO ISO ISO

148-3 150 155 157 161-1

ISO

161-2

ISO ISO ISO ISO ISO ISO ISO

162 171 172 175 176 177 178

ISO

179-1

ISO ISO

179-2 180

Plastics - Determination of Charpy Impact Properties - Part 1: Non-Instrumented Impact Test First Edition; Amendment 1: 7/15/2005 Plastics - Determination of Charpy Impact Properties - Part 2: Instrumented Impact Test First Edition; Technical Corrigendum 1: 1115-1998 Plastics - Determination of Izod Impact Strength Third Edition; Amendment 1: 12/1/2006

ISO

182-1

Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 1: Congo Red Method First Edition

ISO

182-2

Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 2: pH Method First Edition

ISO

182-3

Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 3: Conductometric Method First Edition

ISO ISO ISO

182-4 185 186

Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 4: Potentiometric Method First Edition Grey Cast Iron - Classification Second Edition Paper and Board - Sampling to Determine Average Quality Fourth Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

187 188 196 197-1 197-2 197-3 197-4 197-5 199 204 209 212 214 215

ISO

216

ISO

217

ISO ISO

225 226

ISO

228-1

ISO ISO

228-2 229

ISO

230-1

ISO ISO ISO ISO

230-2 230-3 230-4 230-5

ISO

230-6

Paper, Board and Pulps - Standard Atmosphere for Conditioning and Testing and Procedure for Monitoring the Atmosphere and Conditioning of Samples Second Edition; CEN EN 20187: 1993; PNS 304: 1990 Rubber, Vulcanized or Thermoplastic - Accelerated Ageing and Heat Resistance Tests Fourth Edition Wrought Copper and Copper Alloys - Detection of Residual Stress - Mercury (I) Nitrate Test First Edition Copper and Copper Alloys - Terms and Definitions - Part 1: Materials First Edition Copper and Copper Alloys - Terms and Definitions - Part 2: Unwrought Products (Refinery Shapes) First Edition Copper and Copper Alloys - Terms and Definitions - Part 3: Wrought Products First Edition Copper and Copper Alloys - Terms and Definitions - Part 4: Castings First Edition Copper and Copper Alloys - Terms and Definitions - Part 5: Methods of Processing and Treatment First Edition Rolling Bearings - Thrust Bearings - Tolerances Third edition Metallic Materials - Uninterrupted Uniaxial Creep Testing in Tension - Method of Test First Edition Title not available [Cancelled: ISO 209-1, ISO 209-2] Essential Oils - Sampling Second Edition Documentation - Abstracts for Publications and Documentation First Edition Documentation - Presentation of Contributions to Periodicals and Other Serials First Edition Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction Second Edition Paper - Untrimmed Sizes - Designation and Tolerances for Primary and Supplementary Ranges, and Indication of Machine Direction Second Edition Fasteners - Bolts, Screws, Studs and Nuts - Symbols and Designations of Dimensions Second Edition; Corrected and Reprinted 7/15/1992 Acoustics Normal equal-loudness-level contours Second edition; Supersedes NZS ISO 226: 1987 Pipe Threads Where Pressure-Tight Joints Are Not Made on the Threads - Part 1: Dimensions, Tolerances and Designation Fourth Edition Pipe Threads Where Pressure-Tight Joints Are Not Made on the Threads - Part 2: Verification by Means of Limit Gauges Second Edition Machine Tools - Speeds and Feeds First Edition Test Code for Machine Tools - Part 1: Geometric Accuracy of Machines Operating under No-Load or Finishing Conditions Second Edition Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes Third Edition Test Code for Machine Tools - Part 3: Determination of Thermal Effects Second Edition Test code for machine tools Part 4: Circular tests for numerically controlled machine tools Second Edition Test Code for Machine Tools - Part 5: Determination of the Noise Emission First Edition Test code for machine tools Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests) First edition

ISO ISO

230-7 233

ISO

233-2

ISO ISO ISO

233-3 234-1 234-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

235 236-1 236-2 237 238 239 240 241 242 243 244 245 246 247 248 249 251 252

ISO ISO ISO ISO

252-1 254 255 257

ISO

259

ISO

259-2

Test code for machine tools Part 7: Geometric accuracy of axes of rotation First edition Documentation - Transliteration of Arabic Characters into Latin Characters First Edition Information and Documentation - Transliteration of Arabic Characters - into Latin Characters - Part 2: Arabic Language - Simplified Transliteration First Edition Information and Documentation - Transliteration of Arabic Characters into Latin Characters - Part 3: Persian Language - Simplified Transliteration First Edition Files and Rasps - Part 1: Dimensions Files and Rasps - Part 2: Characteristics of Cut First Edition Parallel Shank Jobber and Stub Series Drills and Morse Taper Shank Drills Second Edition; Amendment Slip-1981; Corrigendum 11996 Hand Reamers First Edition; Amendment 1: 2/15/1977 Long Fluted Machine Reamers, Morse Taper Shanks First Edition; Amendment 1: 2/15/1977 Rotating Tools with Parallel Shanks - Diameters of Shanks and Sizes of Driving Squares First Edition Reduction Sleeves and Extension Sockets for Tools with Morse Taper Shanks First Edition Drill Chuck Tapers Second Edition Milling Cutters - Interchangeability Dimensions for Cutter Arbors or Cutter Mandrels Second Edition Shanks for Turning and Planing Tools - Shapes and Dimensions of the Section Second Edition Carbide Tips for Brazing on Turning Tools First Edition Turning Tools with Carbide Tips - External Tools Aircraft - Sealing Wire First Edition Aircraft - Lockwire - Diameters Second Edition Rolling bearings ù Cylindrical roller bearings, separate thrust collars ù Boundary dimensions Third Edition Rubber - Determination of Ash Fourth Edition Rubbers, raw - Determination of volatile-matter content Fourth Edition Rubber, Raw Natural - Determination of Dirt Content Third Edition Conveyor belts with textile carcass Widths and lengths Third Edition Conveyor belts ù Adhesion between constitutive elements ù Test methods Third Edition Textile Conveyor Belts - Adhesive Strength between Constitutive Elements - Part 1: Methods of Test First Edition; Partially Replaces ISO 252: 1988; Corrigendum 1: 11/15/2006 Belt Drives - Pulleys - Quality, Finish and Balance Third Edition Belt Drives - Pulleys for V-Belts (System Based on Datum Width) - Geometrical Inspection of Grooves Second Edition Pesticides and other agrochemicals Principles for the selection of common names Third Edition Documentation - Transliteration of Hebrew Characters into Latin Characters First Edition; Cancels and Replaces ISO R 259-1962 Information and Documentation - Transliteration of Hebrew Characters into Latin Characters - Part 2: Simplified Transliteration First Edition; Corrected and Reprinted - 1995

ISO ISO

261 262

ISO General Purpose Metric Screw Threads - General Plan Second Edition ISO General Purpose Metric Screw Threads - Selected Sizes for Screws, Bolts and Nuts Second Edition

ISO

263

ISO

264

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

265-1 266 268 269 272 273 276 277 279 280 281 282

ISO ISO

283 284

ISO

286-1

ISO ISO

286-2 287

ISO

289-1

ISO

289-2

ISO

289-3

ISO ISO

289-4 291

ISO Inch Screw Threads - General Plan and Selection for Screws, Bolts and Nuts - Diameter Range 0,06 to 6 in First Edition Unplasticized Polyvinyl Chloride (PVC) Fittings with Plain Sockets for Pipes under Pressure - Laying Length - Metric Series First Edition; Addendum 1-1982 Pipes and Fittings of Plastics Materials - Fittings for Domestic and Industrial Waste Pipes - Basic Dimensions: Metric Series - Part 1: Unplasticized Poly(Vinyl Chloride) (PVC-U) First Edition Acoustics - Preferred Frequencies Second Edition Aircraft - Mechanical and Electromechanical Indicators - General Requirements First Edition Correspondence Envelopes - Designation and Sizes Second Edition; PNS 319: 1989 Fasteners - Hexagon Products - Widths Across Flats Second Edition Fasteners - Clearance Holes for Bolts and Screws First Edition; Amendment Slip-1979; NZS/ISO 273: 1979 Binders for Paints and Varnishes - Linseed Stand Oil - Requirements and Methods of Test Second Edition Binders for Paints and Varnishes - Raw Tung Oil - Requirements and Methods of Test Second Edition Essential Oils - Determination of Relative Density at 20 Degrees C - Reference Method second Edition Essential Oils - Determination of Refractive Index Second Edition Rolling bearings ù Dynamic load ratings and rating life Second Edition Conveyor Belts - Sampling Second Edition Textile conveyor belts ù Full thickness tensile strength, elongation at break and elongation at the reference load ù Test method Third Edition [Superseded: ISO 283-1, ISO 283-1] Conveyor Belts - Electrical Conductivity - Specification and Test Method Third Edition ISO System of Limits and Fits - Part 1: Bases of Tolerances, Deviations and Fits First Edition; CEN EN 20286-1: 1993; NZS/ISO 286.1: 1988 ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts First Edition; Technical Corrigendum 1: 09/15/2006 Paper and Board - Determination of Moisture Content - Oven-Drying Method Second Edition; CEN EN 20287: 1994 Rubber, Unvulcanized - Determinations Using a Shearing-Disc Viscometer - Part 1: Determination of Mooney Viscosity Second edition Rubber, Unvulcanized - Determinations Using a Shearing-Disc Viscometer - Part 2: Determination of Pre-Vulcanization Characteristics First Edition Rubber, Unvulcanized - Determinations Using a Shearing-Disc Viscometer - Part 3: Determination of the Delta Mooney Value for NonPigmented, Oil-Extended, Emulsion-Polymerized SBR First Edition Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 4: Determination of the Mooney stress-relaxation rate First Edition; Corrected Version: 03/01/2004 Plastics Standard atmospheres for conditioning and testing Third Edition

ISO

293

Plastics Compression moulding of test specimens of thermoplastic materials Third Edition

ISO

294-1

ISO

294-2

ISO ISO

294-3 AMD 1 294-3

ISO

294-4

ISO ISO ISO ISO ISO ISO ISO ISO

294-5 295 296 297 298 299 301 302

ISO ISO

303 CORR 1 303

ISO

304

ISO ISO ISO

305 306 307

ISO

308

ISO

310

Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates AMENDMENT 1 Second Edition Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates Second Edition Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 4: Determination of Moulding Shrinkage Second Edition Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 5: Preparation of Standard Specimens for Investigating Anisotropy First Edition; Technical Corrigendum 1: 3/15/2003; Amendment 1: 05/01/2004 Plastics - Compression Moulding of Test Specimens of Thermosetting Materials Third Edition Machine Tools - Self-Holding Tapers for Tool Shanks Second Edition 7/24 Tapers for Tool Shanks for Manual Changing Second Edition Machine Tools - Lathe Centres - Sizes for Interchangeability First Edition Machine Tool Tables - T-Slots and Corresponding Bolts Second Edition Zinc Alloy Ingots Intended for Casting Second Edition Pulps Determination of Kappa number Second Edition Road vehicles ù Installation of lighting and light signalling devices for motor vehicles and their trailers TECHNICAL CORRIGENDUM 1 Second Edition Road vehicles ù Installation of lighting and light signalling devices for motor vehicles and their trailers Second Edition Surface Active Agents - Determination of Surface Tension by Drawing up Liquid Films Second Edition; Technical Corrigendum 11998 Plastics - Determination of Thermal Stability of Poly(Vinyl Chloride), Related Chlorine-Containing Homopolymers and Copolymers and Their Compounds - Discoloration Method Second Edition Plastics Thermoplastic materials Determination of Vicat softening temperature (VST) Fourth Edition Plastics ù Polyamides ù Determination of viscosity number Fifth Edition Plastics - Phenolic Moulding Materials - Determination of Acetone-Soluble Matter (Apparent Resin Content of Material in the Unmoulded State) Third Edition Manganese Ores and Concentrates - Determination of Hygroscopic Moisture Content in Analytical Samples - Gravimetric Method Third Edition

ISO ISO

312 314

Manganese Ores - Determination of Active Oxygen Content, Expressed as Manganese Dioxide - Titrimetric Method Third Edition Manganese Ores - Determination of Carbon Dioxide Content - Gravimetric Method Second Edition

Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens First Edition; Supersedes ISO 294: 1995; Amendment 1: 01-15-2001; Amendment 2: 09-01-2005 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 2: Small Tensile Bars First Edition; Supersedes ISO 294: 1995; Amendment 1: 05/15/2004

Manganese Ores and Concentrates - Determination of Nickel Content - Dimethylglyoxime Spectrometric Method and Flame Atomic Absorption Spectrometric Method First Edition Manganese Ores - Determination of Cobalt Content - Nitroso-R-Salt Photometric Method Second Edition Manganese Ores and Concentrates - Determination of Arsenic Content - Spectrometric Method First Edition Manganese Ores - Determination of Sulphur Content - Barium Sulphate Gravimetric Methods and Sulphur Dioxide Titrimetric Method After Combustion Second Edition Coal - Determination of Nitrogen - Semi-Micro Kjeldahl Method Fourth Edition; Corrigendum 1-1996 Solid Mineral Fuels - Determination of Total Sulfur - Eschka Method Second Edition Road Vehicles - 50 Semi-Trailer Fifth Wheel Coupling Pin - Basic and Mounting/Interchangeability Dimensions Second Edition; Corrigendum 1-1990 Conveyor belts Laboratory scale flammability characteristics Requirements and test method Third Edition Textile Machinery and Accessories - Worsted and Woollen Cards - Width of Cylinder and Width on the Wire Second Edition Textile Machinery and Accessories - Spinning Machines - Flyer Bobbins First Edition Hard Coal - Audibert-Arnu Dilatometer Test First Edition

ISO ISO ISO

315 316 317

ISO ISO ISO

320 333 334

ISO ISO ISO ISO ISO

337 340 342 344 349

ISO ISO ISO ISO ISO ISO

351 354 355 356 359 361

ISO

362-1

ISO

363-1

ISO ISO ISO ISO

363-2 364 365 366-1

ISO

366-2

ISO

366-3

Solid Mineral Fuels - Determination of Total Sulfur - High Temperature Combustion Method Third Edition; Corrigendum 1-1996 Acoustics Measurement of sound absorption in a reverberation room Second Edition Rolling bearings ù Tapered roller bearings ù Boundary dimensions and series designations Second Edition Essential Oils - Preparation of Test Samples Second Edition Cinematography - Projectable Image Area on 16 mm Motion-Picture Prints - Dimensions and Location Second Edition Basic Ionizing Radiation Symbol First Edition Measurement of noise emitted by accelerating road vehicles ù Engineering method ù Part 1: M and N categories First Edition [Cancelled: ISO 362, ISO 362, ISO 7188] Textile machinery and accessories - Flat steel healds with closed end loops - Part 1: Dimensions of healds manufactured of rolled steel wire First Edition;:1992 Textile machinery and accessories Flat steel healds with closed end loops Part 2: Dimensions of healds manufactured of hardened strip steel First Edition Textile Machinery and Accessories - Twin Wire Healds for Weaving Machines with Heald Frames First Edition Textile Machinery and Accessories - Twin Wire Healds with Inset Mail for Jacquard Weaving Second Edition Textile Machinery and Accessories - Reeds - Part 1: Pitch Bound Reeds - Dimensions First Edition Textile Machinery and Accessories - Reeds - Part 2: Metal Reeds with Plate Baulk - Dimensions and Designation First Edition; Replaces ISO 367: 1976 Textile Machinery and Accessories - Reeds - Part 3: Metal Reeds with Double-Spring Baulk - Dimensions and Designation First Edition

ISO

366-4

Textile machinery and accessories - Reeds - Part 4: Dimensions and designation of plasticbound metal reeds Second edition

ISO

366-5

ISO

368

ISO

376

ISO ISO ISO ISO ISO ISO ISO ISO

377 378 379 383 384 385 386 387

ISO

389-1

ISO

389-2

ISO

389-3

ISO

389-4

ISO

389-5

ISO

389-6

ISO

389-7

ISO ISO ISO ISO ISO ISO ISO

389-8 390 404 406 407 413 415

Textile machinery and accessories Reeds Part 5: Dimensions and designation of profile capsules First Edition Spinning Preparatory, Spinning and Doubling (Twisting) Machinery - Tubes for Ring-Spinning, Doubling and Twisting Spindles, Taper 1:38 and 1:64 Fourth Edition Metallic Materials - Calibration of Force-Proving Instruments Used for the Verification of Uniaxial Testing Machines Third Edition Steel and Steel Products - Location and Preparation of Samples and Test Pieces for Mechanical Testing Second Edition; Corrigendum 1 09-15-1997 Gymnastic Equipment - Parallel Bars First Edition Gymnastic Equipment - Horizontal Bar First Edition Laboratory Glassware - Interchangeable Conical Ground Joints First Edition Laboratory Glassware - Principles of Design and Construction of Volumetric Glassware First Edition Laboratory glassware Burettes First Edition; Replaces ISO 385-1:1984, ISO 385-2:1984, ISO 385-3:1984 Liquid-in-Glass Laboratory Thermometers - Principles of Design, Construction and Use First Edition; Hydrometers - Principles of Construction and Adjustment First Edition; Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 1: Reference Equivalent Threshold Sound Pressure Levels for Pure Tones and Supra-Aural Earphones First Edition Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 2: Reference Equivalent Threshold Sound Pressure Levels for Pure Tones and Insert Earphones First Edition Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 3: Reference Equivalent Threshold Force Levels for Pure Tones and Bone Vibrators First Edition; Corrigendum 1-1995; AS/NZS 1591.1: 1995 Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 4: Reference Levels for Narrow-Band Masking Noise First Edition Acoustics Reference zero for the calibration of audiometric equipment Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz First Edition;:1998 Acoustics ù Reference zero for the calibration of audiometric equipment ù Part 6: Reference threshold of hearing for test signals of short duration First Edition Acoustics Reference zero for the calibration of audiometric equipment Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions Second Edition Acoustics Reference zero for the calibration of audiometric equipment Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones First Edition Products in Fibre-Reinforced Cement - Sampling and Inspection Second Edition Steel and Steel Products - General Technical Delivery Requirements Second Edition Technical Drawings - Tolerancing of Linear and Angular Dimensions Second Edition Small Medical Gas Cylinders - Pin-Index Yoke-Type Valve Connections Third Edition Aircraft - Heads of Lubricating Nipples First Edition Envelopes, Postcards and Similar Articles - Cancellation Area First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

416 418 420 422 423 424 431 432 433 437 439

ISO ISO ISO ISO

441 445 446 447

ISO ISO ISO ISO ISO

449 451 456 457 458-1

ISO ISO ISO

458-2 461-1 461-2

ISO

463 CORR 1

ISO ISO

463 464

ISO ISO ISO ISO

466 472 476 477

Picture Postcards - Area Reserved for the Address First Edition Photography - Processing Chemicals - Specifications for Anhydrous Sodium Sulfite Third Edition Photography - Processing Chemicals - Specifications for Potassium Bromide Second Edition Photography - Processing Chemicals - Specifications for p-Menthylaminophenol Sulfate Second Edition Photography - Processing Chemicals - Specifications for Hydroquinone Second Edition Photography - Processing Chemicals - Specifications for Anhydrous Sodium Carbonate Monohydrate Second Edition Copper Refinery Shapes Second Edition Ply Type Conveyor Belts - Characteristics of Construction Second Edition Conveyor Belts - Marking Second Edition, Amendment 1: 01/15/2006 Steel and Cast Iron - Determination of Total Carbon Content - Combustion Gravimetric Method First Edition Steel and Cast Iron - Determination of Total Silicon Content - Gravimetric Method Second Edition Textile Machinery and Accessories - Drop Wires for Warp Stop Motions for Weaving Machines without Automatic Drawing-In Second Edition Pallets for Materials Handling - Vocabulary Second Edition Micrographics ISO character and ISO test chart No. 1 Description and use Third Edition Machine Tools - Direction of Operation of Controls Second Edition Ships and Marine Technology - Magnetic Compasses, Binnacles and Azimuth Reading Devices - Class A Second Edition; Corrected and Reprinted 04/01/1999 Aircraft - Pressure Re-Oiling Connection First Edition; Erratum-1980 Surface Active Agents - Analysis of Soaps - Determination of Free Caustic Alkali First Edition Soaps - Determination of Chloride Content - Titrimetric Method Second Edition Plastics - Determination of Stiffness in Torsion of Flexible Materials - Part 1: General Method First Edition Plastics - Determination of Stiffness in Torsion of Flexible Materials - Part 2: Application to Plasticized Compounds of Homopolymers and Copolymers of Vinyl Chloride First Edition Aircraft - Connectors for Ground Electrical Supplies - Part 1: Design, Performance and Test Requirements Second Edition Aircraft - Connectors for Ground Electrical Supplies - Part 2: Dimensions First Edition Geometrical Product Specifications (GPS) ù Dimensional measuring equipment ù Design and metrological characteristics of mechanical dial gauges CORR 1 First Edition;:1965 [Replaced: ISO R463] Geometrical Product Specifications (GPS) Dimensional measuring equipment Design and metrological characteristics of mechanical dial gauges First Edition;:1965 [Replaced: ISO R463] Rolling Bearings - Radial Bearings with Locating Snap Ring - Dimensions and Tolerances Second Edition Cinematography - Image Produced by 16mm Motion-Picture Camera Aperture - Position and Dimensions First Edition; Amendment Slip-1980 Plastics - Vocabulary Plastiques - Vocabulaire Third Edition Textile Machinery and Accessories - Pirn Winding Machines - Vocabulary First Edition Textile Machinery and Accessories - Cone and Cheese Winding Machines - Vocabulary First Edition

ISO

482

ISO

483

ISO

484-1

ISO ISO ISO ISO ISO ISO

484-2 485 486 487 488 489

ISO ISO ISO ISO ISO ISO

490 491 492 493 494 496

ISO ISO

497 498

ISO

500-1 CORR 1

ISO

500-1

ISO

500-2

ISO ISO ISO ISO ISO ISO ISO

500-3 501 502 504 505 506 509

Aircraft - Propulsion Units and Components - Methods of Numbering and Describing Direction of Rotation First Edition Plastics - Small Enclosures for Conditioning and Testing Using Aqueous Solutions to Maintain Relative Humidity at a Constant Value Second Edition Shipbuilding - Ship Screw Propellers - Manufacturing Tolerances - Part 1: Propellers of Diameter Greater Than 2,50 m First Edition Shipbuilding - Ship Screw Propellers - Manufacturing Tolerances - Part 2: Propellers of Diameter between 0,80 and 2,50 m Inclusive First Edition Aircraft Water-Methanol Pressure Connections First Edition; Erratum-1980 Cinematography - 16 mm Motion-Picture Film Perforated 8 mm Type R - Cutting and Perforating Dimensions Third Edition Steel Roller Chains, Types S and C, Attachments and Sprockets Third Edition Milk - Determination of Fat Content - Gerber Butyrometers First Edition Plastics - Determination of the Refractive Index Second Edition Cinematography - Magnetic Stripes and Magnetic Recording Head Gaps for Sound Record on 16 mm Motion-Picture Film Perforated Along One Edge (Type 1) - Positions and Width Dimensions Second Edition Cinematography - 35 mm Motion-Picture Film and Magnetic Film - Cutting and Perforating Dimensions Sixth Edition Rolling Bearings - Radial Bearings - Tolerances Fourth Edition Aircraft - Dimensions for Single-Hole Mounting (Class 1 and Class 2) Lever-Operated Manual Switches First Edition Parallel Shank Twist Drills - Long Series First Edition Driving and Driven Machines - Shaft Heights First Edition Guide to the Choice of Series of Preferred Numbers and of Series Containing More Rounded Values of Preferred Numbers First Edition Natural Rubber Latex Concentrate - Preparation of Dry Films Second Edition Agricultural tractors ù Rear-mounted power take-off types 1, 2 and 3 ù Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone TECHNICAL CORRIGENDUM 1 First Edition Agricultural tractors ù Rear-mounted power take-off types 1, 2 and 3 ù Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone First Edition Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 2: Narrow-track tractors, dimensions for master shield and clearance zone First Edition; Together With ISO 500-1:2004 and ISO 500-3:2004 Replaces ISO 500:1991 Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 Part 3: Main PTO dimensions and spline dimensions, location of PTO First Edition; Together With ISO 500-1:2004 and ISO 500-2:2004 Replaces ISO 500:1991 Hard Coal - Determination of the Crucible Swelling Number Third Edition Coal - Determination of Caking Power - Gray-King Coke Test Second Edition Turning Tools with Carbide Tips - Designation and Marking First Edition Conveyor Belts - Method for the Determination of the Tear Propagation Resistance of Textile Conveyor Belts Second Edition Rubber Latex, Natural, Concentrate - Determination of Volatile Fatty Acid Number Third Edition Pallet Trucks - Principal Dimensions First Edition; Replaces ISO R509: 1966

ISO

510

ISO ISO ISO

513 514 516

ISO

517

ISO ISO ISO ISO ISO ISO

518 519 520 521 522 525

ISO ISO

527-1 527-2

ISO

527-3

ISO

527-4

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

527-5 528 529 530 532 534 535 536 540 542

ISO ISO ISO

544 548 549

Red Lead for Paints First Edition Classification and application of hard cutting materials for metal removal with defined cutting edges Designation of the main groups and groups of application Third Edition; Turning Tools with Carbide Tips - Internal Tools First Edition Photography - Camera Shutters - Timing Third Edition Photography Apertures and related properties pertaining to photographic lenses Designations and measurements Second Edition; Technical Corrigendum: 10/01/2006 Photography Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units Specification Second Edition Photography - Hand-Held Cameras - Flash-Connector Dimensions Second Edition Cereals and Pulses - Determination of the Mass of 1000 Grains First Edition Machine Chucking Reamers with Parallel Shanks or Morse Taper Shanks First Edition Special Tolerances for Reamers First Edition Bonded Abrasive Products - General Requirements Third Edition Plastics - Determination of tensile properties - Part 1: General principles First Edition; Corrigendum 1-1994; Amendment 1: 09-012005 Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics First Edition Plastics - Determination of Tensile Properties - Part 3: Test Conditions for Films and Sheets First Edition; Technical Corrigendum 1:06-15-1998; Technical Corrigendum 2:04-15-2001 PLastics - Determination of Tensile Properties - Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites First Edition; Replaces ISO 3268:1978 Plastics - Determination of Tensile Properties - Part 5: Test Conditions for Unidirectional Fibre-Reinforced Plastic Composites First Edition; Replaces 3268:1978 Refractory Products - Determination of Pyrometric Cone Equivalent (Refractoriness) First Edition Short Machine Taps and Hand Taps Second Edition Aircraft - General Purpose Push-Pull Single-Pole Circuit-Breakers - Dimensions First Edition Acoustics - Method for Calculating Loudness Level First Edition Paper and Board - Determination of Thickness and Apparent Bulk Density or Apparent Sheet Density Third Edition Paper and Board - Determination of Water Absorptiveness - Cobb Method Second Edition; CEN EN 20535: 1994 Paper and Board - Determination of Grammage Second Edition Solid Mineral Fuels - Determination of Fusibility of Ash - High-Temperature Tube Method Third Edition Oilseeds - Sampling Second Edition; CEN EN ISO 542: 1995 Welding consumables Technical delivery conditions for welding filler materials Type of product, dimensions, tolerances and markings Third Edition Manganese Ores - Determination of Barium Oxide Content - Barium Sulphate Gravimetric Method Second Edition Manganese Ores - Determination of Combined Water Content - Gravimetric Method Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

553 554 556 558 559 561 562 565 567 570 572 575 576 579

ISO ISO

580 582

ISO

583

ISO ISO ISO ISO ISO ISO ISO ISO

583-1 584 585 587 589 590 591-1 592

ISO

594-1

ISO

594-2

Manganese Ores - Determination of Vanadium Content - Titrimetric Method and Phosphotungstovanadate Photometric Method Second Edition Standard Atmospheres for Conditioning and/or Testing - Specifications First Edition Coke (Greater Than 20 mm in Size) - Determination of Mechanical Strength First Edition Conditioning and Testing - Standard Atmospheres - Definitions First Edition Steel Tubes for Water and Sewage Second Edition Coal Preparation Plant - Graphical Symbols Second Edition; Corrected and Reprinted - 1992 Hard Coal and Coke - Determination of Volatile Matter Third Edition Test Sieves - Metal Wire Cloth, Perforated Metal Plate and Electroformed Sheet - Nominal Sizes of Openings Third Edition Coke - Determination of Bulk Density in a Small Container Second Edition Textile Machinery and Accessories - Heald Carrying Rods for Healds with ClosedO"-Shaped End Loops First Edition" Textile Machinery and Accessories - Shuttles for Pirn Changing Automatic Looms - Dimensions First Edition; Erratum-1976 Textile Machinery and Accessories - Transfer Cones - Half Angle of the Cone 4 Degrees 20 Feet First Edition Textile Machinery and Accessories - Paper Patterns for Dobbies - Dimensions First Edition Coke - Determination of Total Moisture Third Edition Plastics piping and ducting systems Injection-moulded thermoplastics fittings Methods for visually assessing the effects of heating Third Edition Rolling Bearings - Chamfer Dimensions - Maximum Values Third Edition Conveyor belts with a textile carcass ù Total belt thickness and thickness of constitutive elements ù Test methods Third Edition [Cancelled: ISO 583-1, ISO 583-1] Conveyor belts with a textile carcass Total thickness and thickness of elements Part 1: Methods of test First Edition; Technical Corrigendum 1: 12/01/2006; Together with 583-2 Replaces ISO 583:1990 [Cancelled By: ISO 583, ISO 583] Plastics - Unsaturated Polyester Resins - Determination of Reactivity at 80 Degrees C (Conventional Method) First Edition Plastics - Unplasticized Cellulose Acetate - Determination of Moisture Content Second Edition Solid Mineral Fuels - Determination of Chlorine Using Eschka Mixture Third Edition Hard coal Determination of total moisture Third Edition Oil of Brazilian Sassafras First Edition Titanium Dioxide Pigments for Paints - Part 1: Specifications and Methods of Tests First Edition; Replaces ISO 591 Essential Oils - Determination of Optical Rotation Second Edition Conical Fittings with a 6 % (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Part 1: General Requirements First Edition; CEN EN 20594-1: 1993 Conical Fittings with a 6 % (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Part 2: Lock Fittings Second Edition

ISO

595-1

Reusable All-Glass or Metal-and-Glass Syringes for Medical Use - Part 1: Dimensions First Edition; Corrected and Reprinted - 1988

ISO

595-2

ISO ISO

601 602

ISO

603-1

ISO

603-2

ISO

603-3

ISO

603-4

ISO

603-5

ISO

603-6

ISO

603-7

Reusable All-Glass or Metal-and-Glass Syringes for Medical Use - Part 2: Design, Performance Requirements and Tests First Edition; CEN EN ISO 595-2: 1994 Solid Mineral Fuels - Determination of Arsenic Content Using the Standard Silver Diethyldithiocarbamate Photometric Method of ISO 2590 First Edition Coal - Determination of Mineral Matter Second Edition Bonded Abrasive Products - Dimensions - Part 1: Grinding Wheels for External Cylindrical Grinding between Centres First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-2: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 2: Grinding Wheels for Centreless External Cylindrical Grinding Second Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 and ISO 603-3: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 3: Grinding Wheels for Internal Cylindrical Grinding First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999, ISO 603-2: 1999 and ISO 603-4: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 4: Grinding Wheels for Surface Grinding/Peripheral Grinding First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-3: 1999 and ISO 603-5: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 5: Grinding Wheels for Surface Grinding/Face Grinding First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-4: 1999 and ISO 603-6: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 6: Grinding Wheels for Tool and Tool Room Grinding First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-5: 1999 and ISO 603-7: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 7: Grinding Wheels for Manually Guided Grinding First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-6: 1999 and ISO 603-8: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976

ISO

603-8

ISO

603-9

ISO

603-10

Bonded Abrasive Products - Dimensions - Part 8: Grinding Wheels for Deburring and Fettling/Snagging First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-7: 1999 and ISO 603-9: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 9: Grinding Wheels for High-Pressure Grinding First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-8: 1999 and ISO 603-10: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 10: Stones for Honing and Superfinishings First Edition; Technical Corrigendum 1: 1115-1999; Together with ISO 603-1: 1999 to ISO 603-9: 1999 and ISO 603-11: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976

ISO

603-11

ISO

603-12

ISO

603-13

ISO

603-14

ISO

603-15

Bonded Abrasive Products - Dimensions - Part 11: Hand Finishing Sticks First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-10: 1999 and ISO 603-12: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 12: Grinding Wheels for Deburring and Fettling on a Straight Grinder First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-11: 1999 and ISO 603-13: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 13: Grinding Wheels for Deburring and Fettling on a Vertical Grinder First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-12: 1999 and ISO 603-14: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 14: Grinding Wheels for Deburring and Fettling/Snagging on an Angle Grinder First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-13: 1999, ISO 603-15: 1999 and ISO 60316: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 Bonded Abrasive Products - Dimensions - Part 15: Grinding Wheels for Cutting-Off on Stationary or Mobile Cutting-Off Machines First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-14: 1999 and ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976

603-16

Bonded Abrasive Products - Dimensions - Part 16: Grinding Wheels for Cutting-Off on Hand Held Power Tools First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-15: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976

ISO

ISO

604

Plastics - Determination of Compressive Properties Third Edition

ISO

605

ISO ISO ISO

606 CORR 1 606 607

ISO ISO

609 610

ISO

611

ISO ISO

612 613

ISO ISO

614 616

ISO

619

ISO ISO ISO ISO ISO ISO ISO ISO

621 622 625 629 630 630-2 631 633

ISO ISO

636 638

ISO

639-1

ISO

639-2

Pulses - Determination of Impurities, Size, Foreign Odours, Insects, and Species and Variety - Test Methods Second Edition Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets TECHNICAL CORRIGENDUM 1 Third Edition Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Third Edition Surface Active Agents and Detergents - Methods of Sample Division First Edition Solid Mineral Fuels - Determination of Carbon and Hydrogen - High Temperature Combustion Method Second Edition; Corrigendum 1-1996 High-Tensile Steel Chains (Round Link) for Chain Conveyors and Coal Ploughs Second Edition Road Vehicles - Braking of Automotive Vehicles and Their Trailers - Vocabulary Vehicules Routiers - Freinage des Vehicules Automobiles et de Leurs Remorques - Vocabulaire Fourth Edition Road Vehicles - Dimensions of Motor Vehicles and Towed Vehicles - Terms and Definitions First Edition; Erratum-1979; PNS 634: 1992 Ships and Marine Technology - Magnetic Compasses, Binnacles and Azimuth Reading Devices - Class B Second Edition Shipbuilding and Marine Structures - Toughened Safety Glass Panes for Rectangular Windows and Side Scuttles - Punch Method of Non-Destructive Strength Testing Third Edition Coke - Determination of Shatter Indices Second Edition Manganese Ores - Determination of Chromium Content - Diphenylcarbazide Photometric Method and Silver Persulphate Titrimetric Method Second Edition Manganese Ores - Determination of Metallic Iron Content (Metallic Iron Content Not Exceeding 2 %) - Sulphosalicylic Acid Photometric Method Second Edition Solid Mineral Fuels - Determination of Phosphorus Content - Reduced Molybdophosphate Photometric Method First Edition Solid Mineral Fuels - Determination of Carbon and Hydrogen - Liebig Method Second Edition; Corrigendum 1-1996 Steel and Cast Iron - Determination of Manganese Content - Spectrophotometric Method First Edition; PNS 557: 1993 Structural Steels - Plates, Wide Flats, Bars, Sections and Profiles Second Edition; AMENDMENT 1: 12/01/2003 Structural Steels - Part 2: Technical Delivery Requirements for Hot-Finished Hollow Sections First Edition Mosaic Parquet Panels - General Characteristics First Edition Cork - Vocabulary Li×ge ù Vocabulaire Second Edition Welding consumables Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels Classification Third Edition Pulps - Determination of Dry Matter Content First Edition; CEN EN 20638: 1993 Codes for the Representation of Names of Languages - Part 1: Alpha-2 Code Codes pour la Representation des Noms de Langue Partie 1: Code Alpha-2 First Edition; Replaces ISO 639 Codes for the Representation of Names of Languages - Part 2: Alpha-3 Code Codes Pour La Representation Des Noms De Langue Partie 2: Code Alpha-3 First Edition

ISO ISO ISO ISO ISO

639-3 641 642 643 646

Codes for the representation of names of languages ù Part 3: Alpha-3 code for comprehensive coverage of languages First Edition Laboratory Glassware - Interchangeable Spherical Ground Joints First Edition Steel - Hardenability Test by End Quenching (Jominy Test) Second Edition Steels - Micrographic Determination of the Apparent Grain Size Second Edition Information Technology - ISO 7-Bit Coded Character Set for Information Interchange Third Edition Brown Coals and Lignites - Determination of the Yields of Tar, Water, Gas and Coke Residue by Low Temperature Distillation First Edition Laboratory Glassware - One-Mark Pipettes First Edition Laboratory Glassware - Density Hydrometers for General Purposes - Part 1: Specification First Edition Laboratory Glassware - Density Hydrometers for General Purposes - Part 2: Test Methods and Use First Edition Relative Density 60/60 Degrees F Hydrometers for General Purposes First Edition Solid-Stem Calorimeter Thermometers First Edition Enclosed-Scale Calorimeter Thermometers First Edition Long Solid-Stem Thermometers for Precision Use First Edition Short Solid-Stem Thermometers for Precision Use First Edition; Erratum-1982 Long Enclosed-Scale Thermometers for Precision Use First Edition; Erratum-1982 Short Enclosed-Scale Thermometers for Precision Use First Edition Hot-Rolled Steel Sections - Part 1: Equal-Leg Angles - Dimensions First Edition Hot-Rolled Steel Sections - Part 2: Unequal-Leg Angles - Dimensions First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

647 648 649-1 649-2 650 651 652 653 654 655 656 657-1 657-2

ISO

657-5

ISO

657-11

ISO

657-14

ISO

657-15

ISO

657-16

ISO

657-18

Hot-Rolled Steel Sections - Part 14: Hot-Finished Structural Hollow Sections - Dimensions and Sectional Properties Third Edition Hot-Rolled Steel Sections - Part 15: Sloping Flange Beam Sections (Metric Series) - Dimensions and Sectional Properties First Edition Hot-Rolled Steel Sections - Part 16: Sloping Flange Column Sections (Metric Series) - Dimensions and Sectional Properties First Edition Hot-Rolled Steel Sections - Part 18: L Sections for Shipbuilding (Metric Series) - Dimensions, Sectional Properties and Tolerances First Edition

ISO ISO ISO

657-19 657-21 658

Hot-Rolled Steel Sections - Part 19: Bulb Flats (Metric Series) - Dimensions, Sectional Properties and Tolerances First Edition Hot-Rolled Steel Sections - Part 21: T-Sections with Equal Depth and Flange Width - Dimensions First Edition Oilseeds - Determination of Content Impurities Third Edition

Hot-Rolled Steel Sections - Part V: Equal-Leg Angles and Unequal-Leg Angles - Tolerances for Metric and Inch Series First Edition Hot-Rolled Steel Sections - Part 11: Sloping Flange Channel Sections (Metric Series) - Dimensions and Sectional Properties First Edition

ISO ISO ISO ISO ISO ISO ISO ISO

659 660 661 662 663 664 665 666

ISO

668

ISO ISO ISO ISO

669 671 672 673

ISO ISO ISO ISO ISO ISO

675 676 677 678 679 680

ISO ISO ISO ISO

683-1 683-9 683-10 683-11

Oilseeds - Determination of Oil Content (Reference Method) Third Edition Animal and Vegetable Fats and Oils - Determination of Acid Value and Acidity Second Edition; Amendment 1: 3/15/2003 Animal and vegetable fats and oils Preparation of test sample Third Edition Animal and Vegetable Fats and Oils - Determination of Moisture and Volatile Matter Content Second Edition Animal and vegetable fats and oils ù Determination of insoluble impurities content Fourth Edition Oilseeds - Reduction of Laboratory Sample to Test Sample Second Edition Oilseeds - Determination of Moisture and Volatile Matter Content Second Edition; Corrected Version: 04/01/2002 Machine tools Mounting of grinding wheels by means of hub flanges Third Edition Series 1 freight containers - Classification, dimensions and ratings Fifth Edition; Amendment 1: 09/15/2005; Amendment 2: 10/01/2005 Resistance Welding - Resistance Welding Equipment - Mechanical and Electrical Requirements Second Edition * Corrected and Reprinted 03/15/2001 Steel and Cast Iron - Determination of Sulphur Content - Combustion Titrimetric Method First Edition Soaps - Determination of Moisture and Volatile Matter Content - Oven Method First Edition Soaps - Determination of Content of Ethanol-Insoluble Matter Second Edition Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling Point First Edition; Corrigendum 1-1990 Spices and Condiments - Botanical Nomenclature Second Edition; Corrigendum 1-02/15/1997 Straight Bevel Gears for General Engineering and Heavy Engineering - Basic Rack First Edition Straight Bevel Gears for General Engineering and Heavy Engineering - Modules and Diametral Pitches First Edition Methods of Testing Cements - Determination of Strength First Edition Cement - Test Methods - Chemical Analysis First Edition Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 1: Direct-Hardening Unalloyed and Low-Alloyed Wrought Steel in Form of Different Black Products First Edition Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 9: Wrought Free-Cutting Steels First Edition Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 10: Wrought Nitriding Steels Second Edition Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 11: Wrought Case-Hardening Steels First Edition

ISO

683-14

Heat-treatable steels, alloy steels and free-cutting steels Part 14: Hot-rolled steels for quenched and tempered springs Third Edition

ISO ISO

683-15 683-17

ISO ISO ISO

683-18 684 685

Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 15: Valve Steels for Internal Combustion Engines Second Edition Heat-Treated Steels, Alloy Steels and Free-Cutting Steels - Part 17: Ball and Roller Bearing Steels Second Edition Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 18: Bright Products of Unalloyed and Low Alloy Steels Second Edition Analysis of Soaps - Determination of Total Free Alkali First Edition Analysis of Soaps - Determination of Total Alkali Content and Total Fatty Matter Content First Edition

ISO ISO ISO ISO ISO ISO ISO

687 690 690-2 691 692 693 694

Solid mineral fuels Coke Determination of moisture in the general analysis test sample Second Edition Documentation - Bibliographic References - Content, Form and Structure Second Edition Information and Documentation - Bibliographic References - Part 2: Electronic Documents or Parts Thereof First Edition Assembly Tools for Screws and Nuts - Wrench and Socket Openings - Tolerances for General Use Fourth Edition Pulps - Determination of Alkali Solubility Second Edition Dimensions of Seam Welding Wheel Blanks First Edition Ships and Marine Technology - Positioning of Magnetic Compasses in Ships First Edition Glass - Resistance to Attack by a Boiling Aqueous Solution of Mixed Alkali - Method of Test and Classification Third Edition; PNS 1197: 1993 Surface Active Agents - Measurement of Foaming Power - Modified Ross-Miles Method First Edition Surface Active Agents - Washing Powders - Determination of Apparent Density - Method by Measuring the Mass of a Given Volume Second Edition Pulps - Determination of Alkali Resistance Second Edition International Gear Notation - Symbols for Geometrical Data Second Edition

ISO ISO

695 696

ISO ISO ISO

697 699 701

ISO ISO ISO

702-1 702-2 702-3

Machine Tools - Connecting Dimensions of Spindle Noses and Work Holding Chucks - Part 1: Conical Connection Second Edition Machine Tools - Spindle Noses and Face Plates - Sizes for Interchangeability - Part II: Camlock Type First Edition Machine Tools - Spindle Noses and Face Plates - Sizes for Interchangeability - Part III: Bayonet Type First Edition

ISO ISO ISO ISO ISO ISO ISO

702-4 703 704 705 706 707 709

ISO

710-I

ISO

710-II

ISO

710-III

ISO

710-4

ISO

710-5

Machine tools Connecting dimensions of spindle noses and work holding chucks Part 4: Cylindrical connection First Edition Conveyor belts ù Transverse flexibility (troughability) ù Test method Third Edition [Superseded: ISO 703-1, ISO 703-1] Terminology Work - Principles and Methods Second Edition Rubber Latex - Determination of Density between 5 Degrees C and 40 Degrees C Second Edition Rubber Latex - Determination of Coagulum Content (Sieve Residue) Fourth Edition Milk and Milk Products - Guidance on Sampling Second Edition Essential Oils - Determination of Ester Value Second Edition Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part I: General Rules of Representation First Edition Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part II: Representation of Sedimentary Rocks First Edition Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part III: Representation of Magmatic Rocks First Edition Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 4: Representation of Metamorphic Rocks First Edition Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 5: Representation of Minerals Second Edition

ISO

710-6

ISO ISO ISO ISO ISO ISO

710-7 711 712 713 714 715

ISO

717-1

ISO ISO ISO ISO ISO ISO

717-2 718 719 720 721 722

ISO ISO

723 724

ISO

727-1

ISO ISO ISO

727-2 728 729

ISO ISO ISO ISO

730-1 730-2 732 734-1

ISO ISO

734-2 735

Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 6: Representation of Contact Rocks and Rocks Which Have Undergone Metasomatic, Pneumatolytic or Hydrothermal Transformation or Transformation by Weathering First Edition Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 7: Tectonic Symbols First Edition Cereals and Cereal Products - Determination of Moisture Content (Basic Reference Method) Second Edition Cereals and Cereal Products - Determination of Moisture Content Routine Reference Method Third Edition Zinc - Determination of Lead and Cadmium Contents - Polarographic Method First Edition Zinc - Determination of Iron Content - Photometric Method First Edition Zinc - Determination of Lead Content - Polarographic Method First Edition Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation Second Edition; Amendment 1: 08/15/2006 Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation Second Edition; Amendment 1: 08/15/2006 Laboratory Glassware - Thermal Shock and Thermal Shock Endurance - Test Methods Second Edition Glass - Hydrolytic Resistance of Glass Grains at 98 Degrees C - Method of Test and Classification Second Edition Glass - Hydrolytic Resistance of Glass Grains at 121 Degrees C - Method of Test and Classification Second Edition Rock Drilling Equipment - Integral Stems Second Edition Rock Drilling Equipment - Hollow Drill Steels in Bar Form, Hexagonal and Round Third Edition Rock Drilling Equipment - Forged Collared Shanks and Corresponding Chuck Bushings for Hollow Hexagonal Drill Steels Second Edition ISO General-Purpose Metric Screw Threads - Basic Dimensions Second Edition Fittings Made From Unplasticized Poly(Vinyl Chloride) (PVC-U), Chlorinated Poly(Vinyl Chloride) (PVC-C) or Acrylonitrile/Butadiene/Styrene (ABS) With Plain Sockets for Pipes Under Pressure - Part 1: Metric Series First Edition Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure Part 2: Inch-based series Second edition Coke (Nominal Top Size Greater Than 20 mm) - Size Analysis by Sieving Third Edition Oilseeds - Determination of Acidity of Oils Second Edition Agricultural Wheeled Tractors - Rear-Mounted Three-Point Linkage - Part 1: Categories 1, 2, 3 and 4 Third Edition; Corrigendum 11995 Agricultural Wheeled Tractors - Three-Point Linkage - Part II: Category 1 N (Narrow Hitch) First Edition Photography - 120-Size and 220-Size Films - Dimensions Fourth Edition Oilseed meals Determination of oil content Part 1: Extraction method with hexane (or light petroleum) Second Edition Oilseed Residues - Determination of Oil Content - Part 2: Rapid Extraction Method First Edition; Together with ISO 734-1: 1998, it Cancels and Replaces ISO 734: 1979 Oilseed Residues - Determination of Ash Insoluble in Hydrochloric Acid First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

737 738 739 740 746 748 749 750 751 752 CORR 1 752 756-1 758

ISO ISO ISO ISO ISO ISO

759 760 762 763 764 765

ISO ISO ISO

769 770 771

ISO ISO ISO ISO ISO ISO ISO ISO

772 776 777 778 779 780 783 787-1

ISO

787-2

Coniferous Sawn Timber - Sizes - Methods of Measurement First Edition Coniferous Sawn Timber - Sizes - Permissible Deviations and Shrinkage First Edition Sodium Carbonate for Industrial Use - Preparation and Storage of Test Samples First Edition Sodium Carbonate for Industrial Use - Determination of Total Soluble Alkalinity - Titrimetric Method First Edition Sodium Carbonate for Industrial Use - Determination of Matter Insoluble in Water at 50 Degrees Celsius First Edition Measurement of Liquid Flow in Open Channels - Velocity-Area Methods Third Edition Oilseed Residues - Determination of Total Ash First Edition Fruit and Vegetable Products - Determination of Titratable Acidity Second Edition Fruit and Vegetable Products - Determination of Water-Insoluble Solids Second Edition Zinc ingots TECHNICAL CORRIGENDUM 1 Second Edition Zinc ingots Second Edition Propan-2-ol for Industrial Use - Methods of Test - Part 1: General First Edition Liquid Chemical Products for Industrial Use - Determination of Density at 20 Degrees Celsius First Edition Volatile Organic Liquids for Industrial Use - Determination of Dry Residue After Evaporation on a Water Bath - General Method First Edition Determination of Water - Karl Fischer Method (General Method) First Edition Fruit and vegetable products Determination of mineral impurities content Second Edition Fruit and vegetable products Determination of ash insoluble in hydrochloric acid Second Edition Horology - Magnetic Resistant Watches Third Edition Pesticides Considered Not to Require Common Names First Edition Fibre Building Boards - Hard and Medium Boards - Determination of Water Absorption and of Swelling in Thickness After Immersion in Water First Edition Crude or Rectified Oils of Eucalyptus Globulus (Eucalyptus Globulus Labil.) Second Edition Oilseed Residues - Determination of Moisture and Volatile Matter Content First Edition Hydrometric Determinations - Vocabulary and Symbols Fourth Edition; Amendment 1:11/15/2002; Amendment 2: 05/01/2004 Pulps - Determination of Acid-Insoluble Ash Second Edition Paper, board and pulp - Determination of acid-soluble calcium Third Edition Paper, board and pulp - Determination of acid-soluble copper Third Edition Paper, Board and Pulp - Determination of Iron Second Edition Packaging - Pictorial Marking for Handling of Goods Fourth Edition Metallic Materials - Tensile Testing at Elevated Temperature Second Edition General Methods of Test for Pigments and Extenders - Part 1: Comparison of Colour of Pigments First Edition General Methods of Test for Pigments and Extenders - Part 2: Determination of Matter Volatile at 105 Degrees Celsius First Edition; CEN EN ISO 787-2: 1995

ISO

787-3

ISO

787-4

ISO

787-5

ISO

787-7

ISO

787-8

ISO

787-9

ISO

787-10

ISO

787-11

General Methods of Test for Pigments and Extenders - Part 3: Determination of Matter Soluble in Water - Hot Extraction Method Second Edition General Methods of Test for Pigments and Extenders - Part 4: Determination of Acidity or Alkalinity of the Aqueous Extract First Edition General Methods of Test for Pigments and Extenders - Part 5: Determination of Oil Absorption Value First Edition; CEN EN ISO 7875: 1995 General Methods of Test for Pigments and Extenders - Part 7: Determination of Residue on Sieve - Water Method - Manual Procedure First Edition General Methods of Test for Pigments and Extenders - Part 8: Determination of Matter Soluble in Water - Cold Extraction Method Second Edition General Methods of Test for Pigments and Extenders - Part 9: Determination of pH Value of an Aqueous Suspension First Edition; CEN EN ISO 787-9: 1995 General Methods of Test for Pigments and Extenders - Part 10: Determination of Density - Pyknometer Method Second Edition; CEN EN ISO 787-10: 1995 General Methods of Test for Pigments and Extenders - Part 11: Determination of Tamped Volume and Apparent Density After Tamping First Edition; CEN EN ISO 787-11: 1995

ISO

787-13

General Methods of Test for Pigments - Part 13: Determination of Water-Soluble Sulfates, Chlorides and Nitrates Second Edition

ISO

787-14

ISO

787-15

General Methods of Test for Pigments and Extenders - Part 14: Determination of Resistivity of Aqueous Extract Second Edition General Methods of Test for Pigments and Extenders - Part 15: Comparison of Resistance to Light of Coloured Pigments of Similar Types Second Edition; CEN EN ISO 787-15: 1995

ISO

787-16

General Methods of Test for Pigments and Extenders - Part 16: Determination of Relative Tinting Strength (or Equivalent Colouring Value) and Colour on Reduction of Coloured Pigments - Visual Comparison Method Second Edition; CEN EN ISO 787-16: 1995

ISO

787-17

ISO ISO

787-18 787-19

ISO

787-21

ISO

787-22

ISO

787-23

General Methods of Test for Pigments and Extenders - Part 17: Comparison of Lightening Power of White Pigments Second Edition General Methods of Test for Pigments and Extenders - Part 18: Determination of Residue on Sieve - Mechanical Flushing Procedure Second Edition; CEN EN ISO 787-18: 1995 General Methods of Test for Pigments - Part 19 First Edition; CEN EN ISO 787-19: 1995 General Methods of Test for Pigments and Extenders - Part 21: Comparison of Heat Stability of Pigments Using a Stoving Medium First Edition General Methods of Test for Pigments and Extenders - Part 22: Comparison of Resistance to Bleeding of Pigments First Edition General Methods of Test for Pigments and Extenders - Part 23: Determination of Density (Using a Centrifuge to Remove Entrained Air) First Edition

ISO

787-24

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

787-25 788 789-1 789-2 789-3 789-4 789-5 789-6 789-7 789-8 789-9

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

789-10 789-11 789-12 791 792 793 794 795 796 797 799 801-1 801-2 801-3 802

ISO

804

ISO

805

General Methods of Test for Pigments and Extenders - Part 24: Determination of Relative Tinting Strength of Coloured Pigments and Relative Scattering Power of White Pigments - Photometric Methods Second Edition; CEN EN ISO 787-24: 1995 General Methods of Test for Pigments and Extenders - Part 25: Comparison of the Colour, in Full-Shade Systems, of White, Black and Coloured Pigments - Colorimetric Method First Edition Ultramarine Pigments for Paints First Edition Agricultural Tractors - Test Procedures - Part 1: Power Tests for Power Take-Off Second Edition Agricultural Tractors - Test Procedures - Part 2: Rear Three-Point Linkage Lifting Capacity Third Edition Agricultural Tractors - Test Procedures - Part 3: Turning and Clearance Diameters Second Edition Agricultural Tractors - Test Procedures - Part 4: Measurement of Exhaust Smoke Second Edition Agricultural Tractors - Test Procedures - Part 5: Partial Power PTO - Non-Mechanically Transmitted Power First Edition Agricultural Tractors - Test Procedures - Part 6: Centre of Gravity First Edition; Amendment 1-1996 Agricultural Tractors - Test Procedures - Part 7: Axle Power Determination First Edition Agricultural Tractors - Test Procedures - Part 8: Engine Air Cleaner First Edition Agricultural Tractors - Test Procedures - Part 9: Power Tests for Drawbar First Edition; Amendment 1-1993 Agricultural tractors Test procedures Part 10: Hydraulic power at tractor/implement interface First Edition; Co-Copyrighted by OECD Agricultural Tractors - Test Procedures - Part 11: Steering Capability of Wheeled Tractors First Edition Agricultural Tractors - Test Procedures - Part 12: Low Temperature Starting First Edition Magnesium Alloys - Determination of Aluminium - 8-Hydroxyquinoline Gravimetric Method First Edition Magnesium and Magnesium Alloys - Determination of Iron - Orthophenanthroline Photometric Method First Edition Aluminium and Aluminium Alloys - Determination of Iron - Orthophenanthroline Photometric Method First Edition Magnesium and Magnesium Alloys - Determination of Copper Content - Oxalyldihydrazide Photometric Method First Edition Aluminium and Aluminium Alloys - Determination of Copper Content - Oxalyldihydrazide Photometric Method First Edition Aluminium Alloys - Determination of Copper - Electrolytic Method First Edition Aluminium and Aluminium Alloys - Determination of Silicon - Gravimetric Method First Edition Ships and marine technology Pilot ladders Third Edition Pulps - Determination of Saleable Mass in Lots - Part 1: Pulp Baled in Sheet Form Second Edition Pulps - Determination of Saleable Mass in Lots - Part 2: Pulps (Such as Flash-Dried Pulp) Baled in Slabs Second Edition Pulps - Determination of Saleable Mass in Lots - Part 3: Unitized Bales First Edition; Corrected and Reprinted - 1996 Aluminium Oxide Primarily Used for the Production of Aluminium - Preparation and Storage of Test Samples First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Preparation of Solution for Analysis - Method by Alkaline Fusion First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Iron Content - 1,10-Phenanthroline Photometric Method First Edition

ISO

806

ISO

808

ISO

809

ISO

810

ISO ISO

811 812

ISO ISO

813 814

ISO ISO ISO

815 817 820

ISO

830

ISO ISO

832 834-1

ISO

834-4

ISO ISO ISO

834-5 834-6 834-7

ISO ISO ISO ISO ISO

834-8 835 836 839-1 839-2

Aluminium oxide primarily used for the production of aluminium Determination of loss of mass at 300 ░C and 1 000 ░C Second Edition; Supersedes ISO 803 Aluminium and Aluminium Alloys - Determination of Silicon - Spectrophotometric Method with the Reduced Silicomolybdic Complex First Edition Magnesium and Magnesium Alloys - Determination of Manganese - Periodate Photometric Method (Manganese Content between 0,01 and 0,8 %) First Edition Magnesium and Magnesium Alloys - Determination of Manganese - Periodate Photometric Method (Manganese Content Less Than 0,01 %) First Edition Textile Fabrics - Determination of Resistance to Water Penetration - Hydrostatic Pressure Test First Edition; CAN/CGSB-4.2 NO. 26.3-95 Rubber, vulcanized or thermoplastic Determination of low-temperature brittleness Second Edition Rubber, Vulcanized or Thermoplastic - Determination of Adhesion to a Rigid Substrate - 90 Degree Peel Method Third Edition Rubber, vulcanized or thermoplastic ù Determination of adhesion to metal ù Two-plate method Fourth Edition Rubber, Vulcanized or Thermoplastic - Determination of Compression Set at Ambient, Elevated or Low Temperatures Second Edition; Corrigendum 1-1993 Refrigerants Designation system Second Edition Particle Boards - Definition and Classification First Edition Freight Containers - Vocabulary Conteneurs Pour Le Transport De Marchandises - Vocabulaire Second Edition; Technical Corrigendum 1: 07/15/2001 Information and Documentation - Bibliographic Description and References - Rules for the Abbreviation of Bibliographic Terms Second Edition Fire-Resistance Tests - Elements of Building Construction - Part 1: General Requirements First Edition Fire-Resistance Tests - Elements of Building Construction - Part 4: Specific Requirements for Loadbearing Vertical Separating Elements First Edition Fire-Resistance Tests - Elements of Building Construction - Part 5: Specific Requirements for Loadbearing Horizontal Separating Elements First Edition Fire-Resistance Tests - Elements of Building Construction - Part 6: Specific Requirements for Beams First Edition Fire-Resistance Tests - Elements of Building Construction - Part 7: Specific Requirements for Columns First Edition Fire-Resistance Tests - Elements of Building Construction - Part 8: Specific Requirements for Non-Loadbearing Vertical Separating Elements First Edition Laboratory glassware ù Graduated pipettes First Edition [Replaced: ISO 835-1, ISO 835-2, ISO 835-3, ISO 835-4] Terminology for Refractories Terminologie Des Materiaux Refractaires First Edition Milling machine arbors with 7/24 tapers Part 1: Dimensions and designation Second Edition Milling Machine Arbors with 7/24 Tapers - Part II: Accessories First Edition

ISO ISO ISO ISO ISO ISO

841 844 845 846 855 856

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

857-1 857-2 860 862 863 865 866 868 871 873 874 875

ISO

877

ISO

882-1

ISO ISO ISO

882-2 883 885

ISO

886

Industrial Automation Systems and Integration - Numerical Control of Machines - Coordinate System and Motion Nomenclature Second Edition Rigid cellular plastics ù Determination of compression properties Fifth Edition Cellular plastics and rubbers Determination of apparent density Third Edition Plastics - Evaluation of the Action of Microorganisms Second Edition Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression Second Edition Oil of peppermint (Mentha x piperita L.) Second Edition Welding and Allied Processes - Vocabulary - Part 1: Metal Welding Processes Soudage Et Techniques Connexes - Vocabulaire Partie 1: Soudage Des Metaux First Edition; Replaces ISO 857 Welding and allied processes Vocabulary Part 2: Soldering and brazing processes and related terms First Edition Terminology Work - Harmonization of Concepts and Terms Second Edition Surface Active Agents - Vocabulary First Edition; Corrigendum 1-1993; CEN EN ISO 862: 1995 Cement - Test Methods - Pozzolanicity Test for Pozzolanic Cements First Edition Slots in Platens for Projection Welding Machines First Edition Centre Drills for Centre Holes without Protecting Chamfers - Type A First Edition Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) Third Edition Plastics - Determination of Ignition Temperature Using a Hot-Air Furnace Third Edition Peaches - Guide to Cold Storage First Edition Fresh Fruits and Vegetables - Sampling First Edition Essential Oils - Evaluation of Miscibility in Ethanol Second Edition Plastics - Methods of Exposure to Direct Weathering, to Weathering Using Glass-Filtered Daylight, and to Intensified Weathering by Daylight Using Fresnel Mirrors Second Edition Cardamom (Elettaria Cardamomum (Linnaeus) Maton Var. Minuscula Burkill) - Specification - Part 1: Whole Capsules First Edition; Corrigendum 1-1996 Cardamom (Elettaria Cardamomum (Linnaeus) Maton Var. Minuscula Burkill) - Specification - Part 2: Seeds First Edition; Corrigendum 1-1996 Indexable Hardmetal (Carbide) Inserts with Rounded Corners, without Fixing Hole - Dimensions Third Edition General Purpose Bolts and Screws - Metric Series - Radii under the Head Second Edition Aluminium and Aluminium Alloys - Determination of Manganese - Photometric Method (Manganese Content between 0,005 and 1,5 %) First Edition

ISO ISO ISO ISO ISO

887 888 893 894 895

Plain Washers for Metric Bolts, Screws and Nuts for General Purposes - General Plan Second Edition; Corrigendum 1: 01/15/2006 Bolts, Screws and Studs - Nominal Lengths, and Thread Lengths for General Purpose Bolts First Edition Surface Active Agents - Technical Alkane Sulfonates - Methods of Analysis Second Edition Surface Active Agents - Technical Sodium Primary Alkylsulphates - Methods of Analysis First Edition Surface Active Agents - Technical Sodium Secondary Alkylsulfates - Methods of Analysis First Edition

ISO ISO ISO

897 898-1 898-2

ISO ISO

898-5 898-6

ISO ISO ISO

898-7 899-1 899-2

ISO

900

ISO ISO ISO ISO

901 902 903 904

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

910 917 918 920 921 924 925 927 928 930 931 934 935 936 937 938 939 941

Photography - Roll Films, 126, 110 and 135-Size Films - Identification of the Image-Bearing Side Third Edition Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 1: Bolts, Screws and Studs Third Edition Mechanical Properties of Fasteners - Part 2: Nuts with Specified Proof Load Values - Coarse Thread Second Edition Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 5: Set Screws and Similar Threaded Fasteners Not under Tensile Stresses Second Edition Mechanical Properties of Fasteners - Part 6: Nuts with Specified Proof Load Values - Fine Pitch Thread Second Edition Mechanical Properties of Fasteners - Part 7: Torsional Test and Minimum Torques for Bolts and Screws with Nominal Diameters 1 mm to 10 mm First Edition Plastics - Determination of Creep Behaviour - Part 1: Tensile Creep Second Edition Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading Second Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Titanium Content - Diantipyrylmethane Photometric Method First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Absolute Density - Pyknometer Method First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Measurement of the Angle of Repose First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Untamped Density First Edition Hydrochloric Acid for Industrial Use - Determination of Total Acidity - Titrimetric Method First Edition Sulphuric Acid and Oleum for Industrial Use - Determination of Total Acidity, and Calculation of Free Sulphur Trioxide Content of Oleum - Titrimetric Method First Edition Testing of Refrigerant Compressors Second Edition Volatile Organic Liquids for Industrial Use - Determination of Distillation Characteristics First Edition Wool - Determination of Fibre Length (Barbe and Hauteur) Using a Comb Sorter First Edition Nuclear Energy - Vocabulary Energie Nucleaire - Vocabulaire Second Edition Coal Preparation Plant - Principles and Conventions for Flowsheets Second Edition Solid Mineral Fuels - Determination of Carbonate Carbon Content - Gravimetric Method Third Edition Spices and Condiments - Determination of Extraneous Matter Content Second Edition Spices and Condiments - Determination of Total Ash Second Edition Spices and Condiments - Determination of Acid-Insoluble Ash Second Edition Green Bananas - Guide to Storage and Transport First Edition Animal and Vegetable Fats and Oils - Determination of Water Content - Entrainment Method First Edition Animal and Vegetable Fats and Oils - Determination of Titre First Edition Meat and Meat Products - Determination of Total Ash Second Edition Meat and Meat Products - Determination of Nitrogen Content (Reference Method) First Edition; PNS 567: 1992 Hand-Operated Stillage Trucks - Principal Dimensions First Edition Spices and Condiments - Determination of Moisture Content - Entrainment Method First Edition Spices and Condiments - Determination of Cold Water-Soluble Extract First Edition

ISO ISO ISO ISO ISO ISO

945 946 948 949 959-1 959-2

ISO ISO

962 965-1

ISO ISO

965-2 965-3

ISO

965-4

ISO ISO ISO ISO ISO

965-5 972 973 974 975

ISO ISO ISO ISO

976 979 981 999

ISO ISO ISO ISO ISO

1000 1001 1002 1003 1004

ISO

1005-1

ISO ISO

1005-2 1005-3

Cast Iron - Designation of Microstructure of Graphite First Edition Grey Cast Iron - Beam Unnotched Impact Test First Edition Spices and Condiments - Sampling First Edition Cauliflowers - Guide to Cold Storage and Refrigerated Transport Second Edition Pepper (Piper Nigrum L.), Whole or Ground - Specification - Part 1: Black Pepper Second Edition Pepper (Piper Nigrum L.), Whole or Ground - Specification - Part 2: White Pepper Second Edition Information Processing - Implementation of the 7-Bit Coded Character Set and Its 7-Bit and 8-Bit Extensions on 9-Track 12,7 mm (0.5 in) Magnetic Tape First Edition ISO General Purpose Metric Screw Threads - Tolerances - Part 1: Principles and Basic Data Third Edition ISO General Purpose Metric Screw Threads - Tolerances - Part 2: Limits of Sizes for General Purpose External and Internal Screw Threads - Medium Quality Third Edition ISO General Purpose Metric Screw Threads - Tolerances - Part 3: Deviations for Constructional Screw Threads Third Edition ISO General Purpose Metric Screw Threads - Tolerances - Part 4: Limits of Sizes for Hot-Dip Galvanized External Screw Threads to Mate with Internal Screw Threads Tapped with Tolerance Position H or G After Galvanizing First Edition ISO General Purpose Metric Screw Threads - Tolerances - Part 5: Limit of Sizes for Internal Screw Threads to Mate with Hot-Dip Galvanized External Screw Threads with Maximum Size of Tolerance Position h Before Galvanizing First Edition Chillies and Capsicums, Whole or Ground (Powdered) - Specification Second Edition Pimento (Allspice) [Pimenta Dioica (L.) Merr.], Whole or Ground - Specification Second Edition Plastics - Determination of the Brittleness Temperature by Impact Second Edition Brown Coals and Lignites - Determination of Yield of Benzene-Soluble Extract - Semi-Automatic Method Third Edition Rubber and Plastics - Polymer Dispersions and Rubber Latices - Determination of PH Third Edition; Replaces ISO 1148: 1980; Amendment 1: 02/01/2006 Sodium Hydroxide for Industrial Use - Method of Assay First Edition Sodium Hydroxide for Industrial Use - Determination of Chloride Content - Mercurimetric Method First Edition Information and Documentation - Guidelines for the Content, Organization and Presentation of Indexes Second Edition SI Units and Recommendations for the Use of Their Multiples and of Certain Other Units Third Edition; Amendment 1: 11-01-1998 Information Processing - File Structure and Labelling of Magnetic Tapes for Information Interchange Second Edition Rolling Bearings - Airframe Bearings - Characteristics, Boundary Dimensions, Tolerances, Static Load Ratings First Edition Spices and Condiments - Ginger, Whole, in Pieces, or Ground - Specification First Edition Information Processing - Magnetic Ink Character Recognition - Print Specifications Third Edition Railway Rolling Stock Material - Part 1: Rough-Rolled Tyres for Tractive and Trailing Stock - Technical Delivery Conditions Third Edition Railway Rolling Stock Material - Part 2: Tyres, Wheel Centres and Tyred Wheels for Tractive and Trailing Stock - Dimensional, Balancing and Assembly Requirements First Edition Railway Rolling Stock Material - Part 3: Axles for Tractive and Trailing Stock - Quality Requirements First Edition

ISO

1005-4

ISO ISO

1005-6 1005-7

ISO ISO ISO ISO ISO ISO ISO ISO

1005-8 1005-9 1006 1007 1008 1009 1012 1013

ISO ISO ISO ISO

1017 1018 1019 1021

ISO ISO

1022 1023

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

1026 1029 1030 1031 1032 1033 1034 1035-1 1035-2 1035-3 1035-4 1036 1039

Railway Rolling Stock Material - Part 4: Rolled or Forged Wheel Centres for Tyred Wheels for Tractive and Trailing Stock - Quality Requirements First Edition; NZS/ISO 1005.4: 1986 Railway Rolling Stock Material - Part 6: Solid Wheels for Tractive and Trailing Stock - Technical Delivery Conditions Second Edition Railway Rolling Stock Material - Part 7: Wheelsets for Tractive and Trailing Stock - Quality Requirements First Edition Railway Rolling Stock Material - Part 8: Solid Wheels for Tractive and Trailing Stock - Dimensional and Balancing Requirements First Edition Railway Rolling Stock Material - Part 9: Axles for Tractive and Trailing Stock - Dimensional Requirements First Edition Building Construction - Modular Coordination - Basic Module Second Edition; PNS 639: 1988 Photography - 135-Size Film and Magazine - Specifications Third Edition; Supersedes ANSI IT1.14 Photography - Paper Dimensions - Pictorial Sheets Second Edition Photography - Paper Dimensions - Rolls for Printers Third Edition Photography - Films in Sheets and Rolls for General Use - Dimensions Third Edition Coke - Determination of Bulk Density in a Large Container Second Edition Brown coals and lignites Determination of acetone-soluble material (ôresinous substanceö) in the benzene-soluble extract Third Edition Hard Coal - Determination of Moisture-Holding Capacity First Edition; PNS 289-11: 1990 Cinematography - Spools, Daylight Loading Type for 16 mm Motion-Picture Cameras - Dimensions Second Edition Aircraft - Engine Nacelle Fire Extinguisher Apertures and Doors First Edition Aerospace - Gaseous Oxygen Replenishment Connection for Use in Fluid Systems (Old Type) - Dimensions (Inch Series) First Edition Aircraft - High Pressure Air Charging Valves First Edition Fruit and Vegetable Products - Determination of Dry Matter Content by Drying under Reduced Pressure and of Water Content by Azeotropic Distillation First Edition Coniferous Sawn Timber - Defects - Classification First Edition Coniferous Sawn Timber - Defects - Measurement First Edition Coniferous Sawn Timber - Defects - Terms and Definitions First Edition Coniferous Sawn Timber - Sizes - Terms and Definitions First Edition Aircraft - Dimensions for General Purpose Push-Pull Three-Pole Circuit-Breakers First Edition Aircraft - Ground Air-Conditioning Connections First Edition; Hot-Rolled Steel Bars - Part 1: Dimensions of Round Bars First Edition Hot-Rolled Steel Bars - Part 2: Dimensions of Square Bars First Edition Hot-Rolled Steel Bars - Part 3: Dimensions of Flat Bars First Edition; Amendment Slip-1981 Hot-Rolled Steel Bars - Part 4: Tolerances Second Edition Textile Machinery - Dyeing and Finishing Machines - Definition of Left and Right Sides Second Edition Cinematography - Cores for Motion-Picture and Magnetic Film Rolls - Dimensions Third Edition

ISO ISO ISO ISO ISO ISO ISO ISO

1040 1041 1042 1043-1 1043-2 1043-3 1043-4 1044

ISO ISO ISO ISO ISO ISO ISO

1049 1050 1051 1052 1053 1054 1055

ISO

1060-1

ISO ISO ISO ISO

1060-2 1061 1063 1064

ISO ISO ISO ISO ISO ISO

1065 1066 1067 1068 1069 1070

ISO ISO

1071 1072

ISO

1073-1

Building Construction - Modular Coordination - Multimodules for Horizontal Coordinating Dimensions Second Edition Essential Oils - Determination of Freezing Point First Edition Laboratory Glassware - One-Mark Volumetric Flasks Fourth Edition Plastics - Symbols and Abbreviated Terms - Part 1: Basic Polymers and Their Special Characteristics Third Edition Plastics - Symbols and Abbreviated Terms - Part 2: Fillers and Reinforcing Materials Second Edition Plastics - Symbols and Abbreviated Terms - Part 3: Plasticizers Second Edition Plastics - Symbols and Abbreviated Terms - Part 4: Flame Retardants First Edition Industrial Trucks - Lead-Acid Traction Batteries for Electric Trucks - Preferred Voltages Third Edition Continuous Mechanical Handling Equipment for Loose Bulk Materials - Vibrating Conveyors and Feeders with Rectangular or Trapezoidal Trough First Edition Continuous Mechanical Handling Equipment for Loose Bulk Materials - Screw Conveyors First Edition Rivet Shank Diameters First Edition; Cancels and Replaces ISO Recommendation R 1051: 1969 Steels for General Engineering Purposes First Edition; Corrected and Reprinted - 1983 Zinc - Determination of Copper Content - Spectrophotometric Method First Edition Zinc - Determination of Cadmium Content - Polarographic Method First Edition Zinc and Zinc Alloys - Determination of Iron Content - Spectrophotometric Method First Edition Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Part 1: Designation System and Basis for Specifications Second Edition Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Part 2: Preparation of Test Samples and Determination of Properties Third Edition Plastics - Unplasticized Cellulose Acetate - Determination of Free Acidity Second Edition Surface Active Agents - Determination of Stability in Hard Water First Edition Surface Active Agents - Determination of Apparent Density of Pastes on Filling First Edition Non-Ionic Surface-Active Agents Obtained from Ethylene Oxide and Mixed Non-Ionic Surface-Active Agents - Determination of Cloud Point Second Edition Analysis of Soaps - Determination of Glycerol Content - Titrimetric Method First Edition Analysis of Soaps - Determination of Unsaponifiable, Unsaponified and Unsaponified Saponifiable Matter First Edition Plastics - PVC Resins - Determination of Compacted Apparent Bulk Density First Edition; Magnetic Compasses and Binnacles for Sea Navigation - Vocabulary First Edition Liquid Flow Measurement in Open Channels - Slope-Area Method Second Edition; Amendment 1-1997 Welding consumables Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron Classification Second Edition Solid Wood Parquet - General Characteristics First Edition Alphanumeric Character Sets for Optical Recognition - Part 1: Character Set OCR-A - Shapes and Dimensions of the Printed Image First Edition; Amendment Slip-1978

ISO ISO ISO ISO ISO ISO ISO ISO

1073-2 1074 1080 1081 1082 1083 1085 1086

ISO

1087-1

ISO ISO ISO ISO ISO ISO

1087-2 1089 1096 1098 1099 1100-1

ISO

1100-2

ISO ISO ISO

1101 1102 1103

Alphanumeric Character Sets for Optical Recognition - Part II: Character Set OCR-B - Shapes and Dimensions of the Printed Image First Edition; Amendment Slip-1978 Counterbalanced Fork-Lift Trucks - Stability Tests Second Edition Machine Tools - Morse Taper Shanks - Cotter Slots with Taper Keys First Edition Belt Drives - V-Belts and V-Ribbed Belts, and Corresponding Grooved Pulleys - Vocabulary Second Edition Mining - Shackle Type Connector Units for Chain Conveyors Second Edition Spheroidal graphite cast irons Classification Third Edition Assembly Tools for Screws and Nuts - Double-Ended Wrenches - Size Pairing Third Edition Information and Documentation - Title Leaves of Books Second Edition Terminology Work - Vocabulary - Part 1: Theory and Application Travaux Terminologiques - Vocabulaire - Partie 1: Theorie Et Application First Edition Terminology - Vocabulary - Part 2: Computer Applications Terminologie - Vocabulaire - Partie 2: Applications Logicielles First Edition; Replaces ISO 1087 Electrode Taper Fits for Spot Welding Equipment - Dimensions First Edition Plywood - Classification Second Edition Veneer Plywood for General Use - General Requirements First Edition Metallic materials Fatigue testing Axial force-controlled method Second Edition Measurement of Liquid Flow in Open Channels - Part 1: Establishment and Operation of a Gauging Station Second Edition Measurement of Liquid Flow in Open Channels - Part 2: Determination of the Stage-Discharge Relation Second Edition; Technical Corrigendum 1: 08/01/2000 Geometrical Product Specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out Second Edition Commercial Road Vehicles - 50 mm Drawbar Eye - Interchangeability Thrid Edition Road Vehicles - Coupling Balls for Caravans and Light Trailers - Dimensions Fourth Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

1104 1107 1108 1110 1112 1113 1114 1118 1119 1120

Surface Active Agents - Technical Sodium Alkylarylsulphonates (Excluding Benzene Derivatives) - Methods of Analysis First Edition Fishing nets Netting Basic terms and definitions Second Edition Spices and Condiments - Determination of Non-Volatile Ether Extract Second Edition Plastics - Polyamides - Accelerated Conditioning of Test Specimens Third Edition Horology - Functional and Non-Functional Jewels Second Edition Information Processing - Representation of the 7-Bit Coded Character Set on Punched Tape Second Edition Cocoa Beans - Cut Test First Edition; PNS 919: 1993 Aluminium and Aluminium Alloys - Determination of Titanium - Spectrophotometric Chromotropic Acid Method First Edition Geometrical Product Specifications (GPS) - Series of Conical Tapers and Taper Angles Second Edition Conveyor Belts - Determination of Strength of Mechanical Fastenings - Static Test Method Third Edition

ISO

1122-1

ISO ISO ISO ISO

1122-2 1125 1126 1127

ISO ISO

1129 1130

ISO

1132-1

ISO

1132-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

1133 1134 1135-3 1135-4 1136 1138 1139 1140 1141 1143

ISO ISO ISO

1144 1146 1147

ISO ISO

1150 1151-1

ISO

1151-2

ISO

1151-3

Vocabulary of Gear Terms - Part 1: Definitions Related to Geometry Vocabulaire Des Engrenages - Partie 1: Definitions Geometriques Second Edition; Corrigendum 1: 11-01-99 Vocabulary of Gear Terms - Part 2: Definitions Related to Worm Gear Geometry Vocabulaire des Engrenages - Partie 2: Definitions Geometriques Relatives aux Engrenages a Vis First Edition Rubber Compounding Ingredients - Carbon Black - Determination of Ash Third Edition Rubber compounding ingredients Carbon black Determination of loss on heating Fourth Edition Stainless Steel Tubes - Dimensions, Tolerances and Conventional Masses per Unit Length Third Edition Steel Tubes for Boilers, Superheaters and Heat Exchangers - Dimensions, Tolerances and Conventional Masses per Unit Length Second Edition Textile Fibres - Some Methods of Sampling for Testing First Edition; Rolling Bearings - Tolerances Part 1: Terms and Definitions Roulements - Tolerances - Partie 1: Termes Et Definitions First Edition; Replaces ISO 1132 Rolling Bearings - Tolerances Part 2: Measuring and Gauging Principles and Methods First Edition; Cancels and Replaces ISO/TR 9274:1991 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics Fourth edition Pears - Cold Storage Second Edition Transfusion Equipment for Medical Use - Part 3: Blood-Taking Set First Edition Transfusion equipment for medical use Part 4: Transfusion sets for single use Third Edition Wool - Determination of Mean Diameter of Fibres - Air Permeability Method First Edition Rubber compounding ingredients ù Carbon black ù Determination of sulfur content Second Edition Textiles - Designation of Yarns First Edition Fibre ropes Polyamide 3-, 4- and 8-strand ropes Third Edition Ropes - Polyester - Specification Third Edition Metals - Rotating Bar Bending Fatigue Testing First Edition Textiles - Universal System for Designating Linear Density (Tex System) First Edition; Replaces ISO R 138: 1960 and ISO R 271: 1962 Pyrometric Reference Cones for Laboratory Use - Specification First Edition Plastics/Rubber - Polymer Dispersions and Synthetic Rubber Latices - Freeze-Thaw Cycle Stability Test Third Edition Textile Machinery and Accessories - Drop Wires for Warp Stop Motions for Weaving Machines with Automatic Drawing-In Second Edition Flight Dynamics - Concepts, Quantities and Symbols - Part 1: Aircraft Motion Relative to the Air Fourth Edition Flight Dynamics - Concepts, Quantities and Symbols - Part 2: Motions of the Aircraft and the Atmosphere Relative to the Earth Second Edition; Addendum 1-1987 Flight Dynamics - Concepts, Quantities and Symbols - Part 3: Derivatives of Forces, Moments and Their Coefficients Second Edition; Corrigendum 1-1996

ISO ISO ISO ISO

1151-4 1151-5 1151-6 1151-7

ISO

1151-8

ISO ISO

1151-9 1154

ISO ISO ISO ISO

1155 1158 1161 AMD 1 1161

ISO

1163-1

ISO

1163-2

ISO

1167-1

ISO ISO ISO ISO

1167-2 1169 1170 1171

ISO

1172

ISO ISO ISO ISO

1173 1174-1 1174-2 1176

Flight Dynamics - Concepts, Quantities and Symbols - Part 4: Concepts, Quantities and Symbols Used in the Study of Aircraft Stability and Control Second Edition Flight Dynamics - Concepts, Quantities and Symbols - Part 5: Quantities Used in Measurements Second Edition Terms and Symbols for Flight Dynamics - Part 6: Aircraft Geometry Second Edition; Amendment 1-1984 Flight Dynamics - Concepts, Quantities and Symbols - Part 7: Flight Points and Flight Envelopes First Edition Flight Dynamics - Concepts, Quantities and Symbols - Part 8: Concepts and Quantities Used in the Study of the Dynamic Behaviour of the Aircraft First Edition Flight Dynamics - Concepts, Quantities and Symbols - Part 9: Models of Atmospheric Motions Along the Trajectory of the Aircraft First Edition; Amendment 1 10-01-1998 Information Processing - Punched Paper Tape - Dimensions and Location of Feed Holes and Code Holes First Edition Information Processing - Use of Longitudinal Parity to Detect Errors in Information Messages Second Edition; NZS/ISO 1155: 1978 Plastics - Vinyl Chloride Homopolymers and Copolymers - Determination of Chlorine Content Third Edition Series 1 freight containers ù Corner fittings ù Specification AMENDMENT 1: 45 ft containers Fourth Edition Series 1 Freight Containers - Corner Fittings - Specification Fourth Edition; Corrigendum 1-1990; AS/NZS 3711.3: 1993 Plastics - Unplasticized Poly(Vinyl Chloride) (PVC-U) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Third Edition Plastics - Unplasticized Poly(Vinyl Chloride) (PVC-U) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties Second Edition Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method First Edition; Together with ISO 1167-2 Supersedes ISO 1167: 1996 and Together with ISO 1167-3 Supersedes ISO 12092: 2000 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 2: Preparation of pipe test pieces First Edition; Together with ISO 1167-1 Supersedes ISO 1167: 1996 and Together with ISO 1167-3 Supersedes ISO 12092: 2000 Zinc alloys Determination of aluminium content Titrimetric method Second Edition Coal and Coke - Calculation of Analyses to Different Bases First Edition; PNS 289-17: 1990 Solid Mineral Fuels - Determination of Ash Content Third Edition; Technical Corrigendum 1: 11-15-1998 Textile-Glass-Reinforced Plastics - Prepregs, Moulding Compounds and Laminates - Determination of the Textile-Glass and MineralFiller Content - Calcination Methods Second Edition Assembly Tools for Screws and Nuts - Drive Ends for Hand- and Machine-Operated Screwdriver Bits and Connecting Parts Dimensions, Torque Testing Third Edition Assembly Tools for Screws and Nuts - Driving Squares - Part 1: Driving Squares for Hand Socket Tools First Edition Assembly Tools for Screws and Nuts - Driving Squares - Part 2: Driving Squares for Power Socket Tools First Edition Road Vehicles - Masses - Vocabulary and Codes Second Edition

ISO ISO

1177 1178

ISO

1179-1

Information Processing - Character Structure for Start/Stop and Synchronous Character Oriented Transmission Second Edition Magnesium Alloys - Determination of Soluble Zirconium - Alizarin Sulphonate Photometric Method Second Edition Connections for general use and fluid power ù Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing ù Part 1: Threaded ports First Edition [Replaced: ISO 1179]

ISO

1179-2

Connections for general use and fluid power ù Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing ù Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) First Edition [Replaced: ISO 1179]

ISO

1179-3

Connections for general use and fluid power ù Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing ù Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) First Edition [Replaced: ISO 1179]

ISO ISO ISO ISO

1179-4 1180 1181 1182

ISO

1183-1

ISO ISO

1183-2 1183-3

ISO

1185

ISO

1188

ISO ISO ISO ISO

1189 1190-1 1198 1203

ISO

1204

Connections for general use and fluid power ù Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing ù Part 4: Stud ends for general use only with metal-to-metal sealing (type B) First Edition [Cancelled: ISO 1179] Shanks for Pneumatic Tools and Dimensions of Chuck Bushings First Edition; Addendum 1-1985; NZS/ISO 1180: 1983 Fibre ropes Manila and sisal 3-, 4- and 8-strand ropes Third Edition Reaction to Fire Tests for Building Products - Non-Combustibility Test Fourth Edition Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method First Edition; Together with 1183-2 and 1183-3 replaces 1183:1987 Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method First Edition; Replaces ISO 1183:1987 Plastics - Methods for Determining the Density of Non-Cellular Plastics - Part 3: Gas Pyknometer Method First Edition Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage Third Edition Cinematography - Recorded Characteristic for Magnetic Sound on Full-Coat 16 mm Motion-Picture Film - Specifications Second Edition Cinematography - Recorded Characteristic for Magnetic Sound Records on 35 mm Motion-Picture Film Excluding Striped Release Prints - Specifications Second Edition Copper and Copper Alloys - Code of Designation - Part 1: Designation of Materials First Edition Sealed-Beam Landing Lamps for Aircraft - Dimensions First Edition Photography - Roll Film Cameras - Back Window Location Fourth Edition Reciprocating Internal Combustion Engines - Designation of the Direction of Rotation and of Cylinders and Valves in Cylinder Heads, and Definition of Right-Hand and Left-Hand In-Line Engines and Locations on an Engine Second Edition

ISO ISO

1206 1207

Rolling Bearings - Needle Roller Bearings, Dimension Series 48,49 and 69 - Boundary Dimensions and Tolerances Third Edition Slotted Cheese Head Screws - Product Grade A Third Edition; CEN EN ISO 1207

ISO ISO

1208 1209-1

ISO ISO ISO ISO ISO

1209-2 1211 1212 1213-1 1213-2

ISO ISO ISO

1215 1216 1217

ISO ISO ISO ISO ISO

1219-1 1219-2 1222 CORR 1 1222 1223

ISO

1224-1

ISO ISO

1224-2 1230

ISO ISO ISO

1232 1234 1237

ISO ISO ISO ISO ISO

1241 1242 1247 1248 TECH COR 1248

ISO ISO

1249 1264

Spices and Condiments - Determination of Filth First Edition Rigid cellular plastics ù Determination of flexural properties ù Part 1: Basic bending test Third Edition Rigid cellular plastics Determination of flexural properties Part 2: Determination of flexural strength and apparent flexural modulus of elasticity Third Edition Milk - Determination of Fat Content - Gravimetric Method (Reference Method) Second Edition Apples - Cold Storage Second Edition Solid Mineral Fuels - Vocabulary - Part 1: Terms Relating to Coal Preparation Second Edition Solid Mineral Fuels - Vocabulary - Part 2: Terms Relating to Sampling, Testing and Analysis First Edition Commercially Dry Virgin Cork, Ramassage, Gleanings, Corkwood Refuse and Corkwaste - Definitions and Packaging Second Edition Corkwood in Planks - Grading, Classification and Packing Third Edition Displacement Compressors - Acceptance Tests Third Edition; BS 1571: Part 1: 1987; NZS/BS 1571: PT 1: 1987 Fluid power systems and components Graphic symbols and circuit diagrams Part 1: Graphic symbols for conventional use and dataprocessing applications Second Edition Fluid Power Systems and Components - Graphic Symbols and Circuit Diagrams - Part 2: Circuit Diagrams First Edition Photography ù Tripod connections TECHNICAL CORRIGENDUM 1 Third Edition Photography - Tripod Connections Third Edition Cinematography - Picture Areas for Motion-Picture Films for Television - Position and Dimensions Fourth Edition Rolling bearings ù Instrument precision bearings ù Part 1: Boundary dimensions, tolerances and characteristics of metric series bearings First Edition [Cancelled: ISO 1224] Rolling bearings ù Instrument precision bearings ù Part 2: Boundary dimensions, tolerances and characteristics of inch series bearings FIRST EDITION [Cancelled: ISO 1224] Photography - Determination of Flash Guide Numbers Third Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Silica Content - Reduced Molybdosilicate Spectrophotometric Method First Edition Split Pins Second Edition Mustard Seed - Specification Second Edition Essential Oils - Determination of Ester Values, Before and After Acetylation, and Evaluation of the Contents of Free and Total Alcohols Second Edition Essential Oils - Determination of Acid Value Second Edition Aluminium Pigments for Paints First Edition; Amendment 1-1982 Iron oxide pigments Specifications and methods of test Iron oxide pigments Specifications and methods of test Second Edition Zinc Chromate Pigments - Basic Zinc Potassium Chromate Pigments and Zinc Tetrahydroxychromate Pigments First Edition; Corrigendum 1-1992 Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Determination of pH of Aqueous Extract Second Edition

ISO ISO

1265 1268-1

Plastics ù Poly(vinyl chloride) resins ù Determination of number of impurities and foreign particles Second Edition Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 1: General Conditions First Edition Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 2: Contact and Spray-Up Moulding First Edition; Cancels and Replaces ISO 1268: 1974 Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 3: Wet Compression Moulding First Edition

ISO ISO

1268-2 1268-3

ISO

1268-4

ISO ISO ISO

1268-5 1268-6 1268-7

ISO ISO

1268-8 1268-9

ISO

1268-10

ISO ISO

1268-11 1269

ISO ISO

1271 1272

Essential Oils - Determination of Carbonyl Value - Free Hydroxylamine Method Second Edition; Corrected and Reprinted - 1985 Essential Oils - Determination of Content of Phenols Second Edition

ISO ISO

1275 1279

Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors Fourth Edition Essential Oils - Determination of Carbonyl Value - Potentiometric Methods Using Hydroxylammonium Chloride Third Edition

ISO ISO ISO

1302 1304 1306

ISO ISO

1307 1324

ISO

1328-1

ISO

1328-2

Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product Documentation Fourth Edition Rubber compounding ingredients Carbon black Determination of iodine adsorption number Fourth Edition Rubber Compounding Ingredients - Carbon Black (Pelletized) - Determination of Pour Density Fourth Edition Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses Fourth Edition Solid Wood Parquet - Classification of Oak Strips First Edition Cylindrical Gears - ISO System of Accuracy - Part 1: Definitions and Allowable Values of Deviations Relevant to Corresponding Flanks of Gear Teeth First Edition; Corrected and Reprinted - 02/01/1997 Cylindrical Gears - ISO System of Accuracy - Part 2: Definitions and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information First Edition

Fibre-reinforced plastics Methods of producing test plates Part 4: Moulding of prepregs First Edition; Replaces ISO 9353: 1991 Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 5: Filament Winding First Edition; Cancels and Replaces ISO 9291:1996 Fibre-Reinforced Plastics Methods of Producing Test Plates Part 6: Pultrusion Moulding First Edition Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 7: Resin Transfer Moulding First Edition Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 8: Compression moulding of SMC and BMC First Edition Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 9: Moulding of GMT/STC First Edition Fibre-reinforced plastics Methods of producing test plates Part 10: Injection moulding of BMC and other long-fibre moulding compounds General principles and moulding of multipurpose test specimens First Edition; Replaces ISO 1268: 1974 Fibre-reinforced plastics Methods of producing test plates Part 11: Injection moulding of BMC and other long-fibre moulding compounds Small plates First Edition; Replaces ISO 1268: 1974 Plastics Homopolymer and copolymer resins of vinyl chloride Determination of volatile matter (including water) Third Edition

ISO

1340

ISO ISO

1341 1342

ISO ISO ISO ISO ISO ISO

1346 1352 1361 1382 1385-1 1388-1

ISO

1388-2

ISO

1388-3

ISO

1388-4

ISO ISO

1388-5 1388-6

ISO

1388-7

ISO

1388-8

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

1388-9 1388-10 1388-11 1388-12 1392 1401 1402 1403 1407 CORR 1 1407

Cylindrical Gears - Information to Be Given to the Manufacturer by the Purchaser in Order to Obtain the Gear Required First Edition Straight Bevel Gears - Information to Be Given to the Manufacturer by the Purchaser in Order to Obtain the Gear Required First Edition Oil of Rosemary (Rosmarinus Officinalis Linnaeus) Second Edition Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) 3-, 4and 8-strand ropes Third Edition Steel - Torsional Stress Fatigue Testing First Edition Light-Gauge Metal Containers - Round Open-Top Cans - Internal Diameters Fourth Edition Rubber - Vocabulary Caoutchouc - Vocabulaire Fourth Edition Phthalate Esters for Industrial Use - Methods of Test - Part I: General First Edition Ethanol for Industrial Use - Methods of Test - Part 1: General First Edition Ethanol for Industrial Use - Methods of Test - Part 2: Detection of Alkalinity or Determination of Acidity to Phenolphthalein First Edition Ethanol for Industrial Use - Methods of Test - Part 3: Estimation of Content of Carbonyl Compounds Present in Small Amounts Photometric Method First Edition Ethanol for Industrial Use - Methods of Test - Part 4: Estimation of Content of Carbonyl Compounds Present in Moderate Amounts Titrimetric Method First Edition Ethanol for Industrial Use - Methods of Test - Part 5: Determination of Aldehydes Content - Visual Colorimetric Method First Edition Ethanol for Industrial Use - Methods of Test - Part 6: Test for Miscibility with Water First Edition Ethanol for Industrial Use - Methods of Test - Part 7: Determination of Methanol Content (Methanol Contents between 0,01 and 0,20 % (V/V)) - Photometric Method First Edition Ethanol for Industrial Use - Methods of Test - Part 8: Determination of Methanol Content (Methanol Contents between 0,10 and 1,50 % (V/V)) - Visual Colorimetric Method First Edition Ethanol for Industrial Use - Methods of Test - Part 9: Determination of Esters Content - Titrimetric Method After Saponification First Edition Ethanol for Industrial Use - Methods of Test - Part 10: Estimation of Hydrocarbons Content - Distillation Method First Edition Ethanol for Industrial Use - Methods of Test - Part 11: Test for Detection of Furfural First Edition Ethanol for Industrial Use - Methods of Test - Part 12: Determination of Permanganate Time First Edition Determination of Crystallizing Point - General Method First Edition Rubber Hoses for Agricultural Spraying Third Edition Rubber and Plastic Hoses and Hose Assemblies - Hydrostatic Testing Third Edition; CEN EN ISO 1402: 1996 Rubber Hoses, Textile-Reinforced, for General-Purpose Water Applications - Specification Fourth edition Rubber ù Determination of solvent extract Rubber - Determination of Solvent Extract Second Edition

ISO

1408

ISO ISO ISO ISO ISO

1409 1413 1419 1420 1421

ISO

1431-1

ISO

1431-3

ISO ISO ISO

1432 1434 1435

ISO

1436-1

ISO ISO

1436-2 1437

ISO ISO ISO ISO ISO

1438-1 1442 1443 1444 1446

ISO ISO

1456 1458

ISO ISO ISO ISO ISO ISO

1460 1461 1463 1464 1465 1466

Rubber - Determination of Carbon Black Content - Pyrolytic and Chemical Degradation Methods Third Edition Plastics/rubber Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method Fifth Edition Horology - Shock-Resistant Watches Second Edition Rubber- or Plastics-Coated Fabrics - Accelerated-Ageing Tests Second Edition Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Penetration by Water Third Edition Rubber- or Plastics-Coated Fabrics - Determination of Tensile Strength and Elongation at Break Second Edition Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing Fourth Edition; Replaces ISO 1431-2: 1/15/1994 Rubber, Vulcanized or Thermoplastic - Resistance to Ozone Cracking - Part 3: Reference and Alternative Methods for Determining the Ozone Concentration in Laboratory Test Chambers First Edition Rubber, Vulcanized or Thermoplastic - Determination of Low Temperature Stiffening (Gehman Test) Third Edition; Corrigendum 1: 8/1/2003 Natural Rubber in Bales - Amount of Bale Coating - Determination Second Edition Rubber Compounding Ingredients - Carbon Black (Pelletized) - Determination of Fines Content Fourth Edition Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 1: Oil-based fluid applications First Edition Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 2: Water-based fluid applications First Edition Rubber compounding ingredients ù Carbon black ù Determination of sieve residue Fourth edition Water Flow Measurement in Open Channels Using Weirs and Venturi Flumes - Part 1: Thin-Plate Weirs First Edition; Amendment 11998 Meat and Meat Products - Determination of Moisture Content (Reference Method) Second Edition Meat and Meat Products - Determination of Total Fat Content First Edition; PNS 570: 1992 Meat and Meat Products - Determination of Free Fat Content Second Edition Green Coffee - Determination of Water Content Basic Reference Method Second Edition Metallic Coatings - Electrodeposited Coatings of Nickel Plus Chromium and of Copper Plus Nickel Plus Chromium Third Edition Metallic coatings Electrodeposited coatings of nickel Third Edition Metallic Coatings - Hot Dip Galvanized Coatings on Ferrous Materials - Gravimetric Determination of the Mass per Unit Area Second Edition Hot Dip Galvanized Coatings on Fabricated Iron and Steel Articles - Specifications and Test Method Second Edition Metallic and Oxide Coatings - Measurement of Coating Thickness - Microscopical Method Third Edition Aerospace - Tripod Jacks - Clearance Dimensions Second Edition Aircraft - Liquid Oxygen Replenishment Couplings - Mating Dimensions Second Edition Lever-Operated Manual Switches for Aircraft - Performance Requirements First Edition

ISO ISO ISO ISO

1467 1478 1479 1481

General Purpose Push-Pull Single-Pole Circuit-Breakers for Aircraft - Performance Requirements First Edition Tapping Screws Thread Second Edition Hexagon Head Tapping Screws First Edition; CEN EN ISO 1479: 1994; AS/NZS 4402: 1996 Slotted Pan Head Tapping Screws First Edition; CEN EN ISO 1481: 1994; AS/NZS 4403: 1996

ISO

1482

ISO

1483

Slotted Countersunk (Flat) Head Tapping Screws (Common Head Style) First Edition; CEN EN ISO 1482: 1994; AS/NZS 4404: 1996 Slotted Raised Countersunk (Oval) Head Tapping Screws (Common Head Style) First Edition; CEN EN ISO 1483: 1994; AS/NZS 4405: 1996

ISO

1496-1

Series 1 freight containers Specification and testing Part 1: General cargo containers for general purposes Fifth Edition; Amendment 1: 03/01/93; Amendment 2: 07/01/98; Amendment 3: 06/15/05; Amendment 5: 05/15/06; Amendment 4: 11/01/06

ISO

1496-2

ISO

1496-3

ISO

1496-4

Series 1 Freight Containers - Specification and Testing - Part 2: Thermal Containers Fourth Edition; Amendment 1: 02/01/2006 Series 1 Freight Containers - Specification and Testing - Part 3: Tank Containers for Liquids, Gases and Pressurized Dry Bulk Fourth Edition; Amendment 1: 02/01/2006 Series 1 Freight Containers - Specification and Testing - Part 4: Non-Pressurized Containers for Dry Bulk First Edition; Amendment 11994; Technical Corrigendum 1: 03/01/2006

ISO ISO ISO

1496-5 1502 1503

Series 1 Freight Containers - Specification and Testing - Pt 5: Platform and Platform-Based Containers Amendment 1: 1AAA and 1BBB Containers Second Edition; Amendment 1-1993; Amendment 2-1994; AS/NZS 3711.8: 1993; PNS 924-5: 1992 ISO General-Purpose Metric Screw Threads - Gauges and Gauging Second Edition Geometrical Orientation and Directions of Movements First Edition

ISO ISO ISO

1505 1506 1509

ISO ISO ISO ISO ISO ISO ISO ISO ISO

1513 1514 1516 1517 1518 1519 1520 1522 1523

Textile Machinery - Widths Relating to Dyeing and Finishing Machines - Definitions and Range of Nominal Widths Second Edition Textile Machinery - Dyeing, Finishing and Allied Machinery - Classification and Nomenclature First Edition General Purpose Push-Pull Three-Pole Circuit-Breakers for Aircraft - Performance Requirements First Edition Paints and Varnishes - Examination and Preparation of Samples for Testing Third Edition; Corrigendum 1-1994; CEN EN ISO 1513: 1994; AS/NZS 1580.103.1: 1995 Paints and Varnishes - Standard Panels for Testing Fourth Edition Determination of Flash/No Flash Test - Closed Cup Equilibrium Method Third Edition Paints and Varnishes - Surface-Drying Test - Ballotini Method First Edition Paints and Varnishes - Scratch Test Second Edition Paints and Varnishes - Bend Test (Cylindrical Mandrel) Second Edition Paints and Varnishes - Cupping Test Third Edition Paints and Varnishes - Pendulum Damping Test Third Edition Determination of Flashpoint - Closed Cup Equilibrium Method Third Edition

ISO ISO ISO ISO

1524 1530 1531 1532

ISO

1535

ISO

1536

ISO ISO ISO ISO ISO

1537 1539-1 CORR 2 1539-1 CORR 1 1539-1 1539-2

ISO ISO ISO ISO ISO ISO ISO

1539-3 1540 1546 1547 1548 1549 1552

Paints, Varnishes and Printing Inks - Determination of Fineness of Grind Third Edition Fishing Nets - Description and Designation of Knotted Netting Second Edition Fishing Nets - Hanging of Netting - Basic Terms and Definitions First Edition Fishing Nets - Cutting Knotted Netting to Shape (Tapering") First Edition" Continuous Mechanical Handling Equipment for Loose Bulk Materials - Troughed Belt Conveyors (Other Than Portable Conveyors) Belts First Edition Continuous Mechanical Handling Equipment for Loose Bulk Materials - Troughed Belt Conveyors (Other Than Portable Conveyors) Belt Pulleys First Edition Continuous Mechanical Handling Equipment for Loose Bulk Materials - Troughed Belt Conveyors (Other Than Portable Conveyors) Idlers First Edition Information Technology - Programming Languages - Fortran - Part 1: Basic Language Second Edition Information technology ù Programming languages ù Fortran ù Part 1: Base language Second edition Information Technology - Programming Languages - Fortran - Part 1: Basic Language Second Edition Information Technology - Programming Languages - FORTRAN - Part 2: Varying Length Character Strings Second Edition Information Technology - Programming Languages - Fortran - Part 3: Conditional Compilation First Edition; Corrected and Reprinted 12/15/2000 Aerospace - Characteristics of Aircraft Electrical Systems Third Edition Procedure for Milk Recording for Cows First Edition Aircraft - Precision Fuse-Links - General Requirements First Edition Aircraft - Precision Fuse-Links - Type A First Edition Aircraft - Precision Fuse-Links - Type B First Edition Liquid Chlorine for Industrial Use - Method of Sampling (for Determining Only the Volumetric Chlorine Content) First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

1553 1554 1559 1560 1563 1564 1567 1570 1572 1573 1575 1576 1577

Unalloyed Copper Containing Not Less Than 99,90 % of Copper - Determination of Copper Content - Electrolytic Method First Edition Wrought and Cast Copper Alloys - Determination of Copper Content - Electrolytic Method First Edition Dental Materials - Alloys for Dental Amalgam Third Edition; Corrigendum 1: 1997 [Replaced By: ISO 24234] Dental Mercury Second Edition; CAN/CSA-Z349.17-M92 [Replaced By: ISO 24234] Dental Alginate Impression Material Second Edition; CAN/CSA-Z349.38-93 Dental Aqueous Impression Materials Based on Agar Second Edition; CAN/CSA-Z349.20-M92 Dentistry - Denture Base Polymers Third Edition; Amendment 1: 09/01/2003 Zinc and Zinc Alloys - Determination of Tin Content - Spectrophotometric Method First Edition Tea - Preparation of Ground Sample of Known Dry Matter Content Second Edition Tea - Determination of Loss in Mass at 103 Degrees C Second Edition Tea - Determination of Total Ash Third Edition Tea - Determination of Water-Soluble Ash and Water-Insoluble Ash Second Edition Tea - Determination of Acid-Insoluble Ash Second Edition

ISO ISO ISO

1578 1580 1585

Tea - Determination of Alkalinity of Water-Soluble Ash First Edition Slotted Pan Head Screws - Product Grade A Second Edition; CEN EN ISO 1580: 1994 Road Vehicles - Engine Test Code - Net Power Third Edition

ISO ISO ISO ISO

1586 1587 1598 1599

ISO

1600

Textile Machinery and Accessories - Shuttles - Terms and Designation in Relation to the Position of the Shuttle Eye First Edition Gypsum Rock for the Manufacture of Binders - Specifications First Edition Plastics - Cellulose Acetate - Determination of Insoluble Particles Second Edition Plastics - Cellulose Acetate - Determination of Viscosity Loss on Moulding Second Edition Plastics - Cellulose Acetate - Determination of Light Absorption on Moulded Specimens Produced Using Different Periods of Heating Second Edition

ISO

1604

ISO

1607-1

ISO

1607-2

ISO

1608-1

ISO ISO

1608-2 1609

ISO

1617

ISO ISO

1618 1619

ISO

1620

ISO

1622-1

ISO ISO

1622-2 1624

ISO

1628-1

Belt Drives - Endless Wide V-Belts for Industrial Speed-Changers and Groove Profiles for Corresponding Pulleys Second Edition Positive-Displacement Vacuum Pumps - Measurement of Performance Characteristics - Part 1: Measurement of Volume Rate of Flow (Pumping Speed) Second Edition Positive-Displacement Vacuum Pumps - Measurement of Performance Characteristics - Part 2: Measurement of Ultimate Pressure Second Edition Vapour Vacuum Pumps - Measurement of Performance Characteristics - Part 1: Measurement of Volume Rate of Flow (Pumping Speed) Second Edition Vapour Vacuum Pumps - Measurement of Performance Characteristics - Part 2: Measurement of Critical Backing Pressure Second Edition Vacuum Technology - Flange Dimensions First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Sodium Content - Flame Emission Spectrophotometric Method First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Vanadium Content - N-Benzoyl-NPhenylhydroxylamine Photometric Method First Edition Cryolite, Natural and Artificial - Preparation and Storage of Test Samples First Edition Cryolite, Natural and Artificial - Determination of Silica Content - Reduced Molybdosilicate Spectrophotometric Method First Edition Plastics - Polystyrene (PS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Second Edition Plastics - Polystyrene (PS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties Second Edition Plastics - Vinyl Chloride Homopolymer and Copolymer Resins - Sieve Analysis in Water Second Edition Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 1: General Principles Second Edition

Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 2: Poly(Vinyl Chloride) Resins Second Edition Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 3: Polyethylenes and Polypropylenes Second Edition Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 4: Polycarbonate (PC) Moulding and Extrusion Materials Second Edition Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 5: Thermoplastic Polyester (TP) Homopolymers and Copolymers Second Edition

ISO

1628-2

ISO

1628-3

ISO

1628-4

ISO

1628-5

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

1628-6 1629 1641-1 1641-2 1641-3 1651 1652 1656 1657 1658 1660 1663 1666 1673 1675 1680 1681 1683 1684 1686 1689

ISO

1690

Plastics - Determination of Viscosity Number and Limiting Viscosity Number - Part 6: Methyl Methacrylate Polymers First Edition Rubber and Latices - Nomenclature Third Edition End Mills and Slot Drills - Part 1: Milling Cutters with Cylindrical Shanks Second Edition End Mills and Slot Drills - Part II: Milling Cutters with Morse Taper Shanks First Edition End Mills and Slot Drills - Part 3: Milling Cutters with 7/24 Taper Shanks Second Edition Tube Drawing Mandrels First Edition; Amendment 1-1982 Rubber latex Determination of apparent viscosity by the Brookfield test method Third Edition Rubber, Raw Natural, and Rubber Latex, Natural - Determination of Nitrogen Content Third Edition Rubber, Raw and Rubber Latex - Determination of Iron Content - 1,10-Phenanthroline Photometric Method Second Edition Natural Rubber (NR) - Evaluation Procedure Second Edition Technical Drawings - Dimensioning and Tolerancing of Profiles Second Edition; CEN EN ISO 1660: 1995 Rigid cellular plastics ù Determination of water vapour transmission properties Third edition Starch - Determination of Moisture Content - Oven-Drying Method Second Edition Onions - Guide to Storage Second Edition Plastics - Liquid Resins - Determination of Density by the Pyknometer Method Second Edition Acoustics - Test Code for the Measurement of Airborne Noise Emitted by Rotating Electrical Machines First Edition Information Processing - Unpunched Paper Cards - Specification First Edition Acoustics - Preferred Reference Quantities for Acoustic Levels First Edition; BS EN 21683; CEN EN 21683: 1994 Wire, Bar and Tube Drawing Dies - Specifications First Edition; Amendment 2-1982 Sodium and Potassium Silicates for Industrial Use - Samples and Method of Test - General First Edition Sodium and Potassium Silicates for Industrial Use - Calculation of the Ratio SiO2/Na2O or SiO2/K2O First Edition Sodium and Potassium Silicates for Industrial Use - Determination of Silica Content - Gravimetric Method by Insolubilization First Edition

ISO ISO ISO

1691 1692 1693

Sodium and Potassium Silicates for Industrial Use - Determination of Carbonates Content - Gas-Volumetric Method First Edition Sodium and Potassium Silicates for Industrial Use - Determination of Total Alkalinity - Titrimetric Method First Edition Cryolite, Natural and Artificial - Determination of Fluorine Content - Modified Willard-Winter Method First Edition

ISO ISO

1694 1700

ISO

1701-1

ISO

1701-2

ISO ISO ISO ISO

1703 1704 1708 1709

ISO ISO ISO ISO ISO

1711-1 1711-2 1716 1717 1718

ISO

1721

ISO

1722

ISO

1724

ISO ISO ISO ISO ISO

1726-2 1726 CORR 1 1726 1728 1730

ISO ISO

1735 1736

ISO ISO ISO

1737 1738 1739

Cryolite, Natural and Artificial - Determination of Iron Content - 1,10-Phenanthroline Photometric Method First Edition Cinematography - 8 mm Type S Motion-Picture Raw Stock Film - Cutting and Perforating Dimensions Third Edition Test conditions for milling machines with table of variable height Testing of the accuracy Part 1: Machines with horizontal spindle First Edition; Replaces ISO 1701-0: 6/1/1984 and ISO 1701-3:12/15/97 Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy - Part 2: Machines with Horizontal Spindle Second Edition; Replaces ISO 1701-0: 6/1/1984 and ISO 1701-3: 12/15/1997 Assembly tools for screws and nuts Designation and nomenclature Outils de manoeuvre pour vis et Úcrous DÚsignation et nomenclature Third Edition Shipbuilding - Stud-Link Anchor Chains Second Edition Acceptance Conditions for General Purpose Parallel Lathes - Testing of the Accuracy Fourth Edition Nuclear Energy - Fissile Materials - Principles of Criticality Safety in Storing, Handling and Processing Second Edition Assembly tools for screws and nuts ù Technical specifications ù Part 1: Hand-operated wrenches and sockets Second Edition Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets (impact") First Edition" Reaction to Fire Tests for Building Products - Determination of the Heat of Combustion Second Edition Rock Drilling - Rotary Drill-Rods and Rotary Drill-Bits for Dry Drilling - Connecting Dimensions First Edition Rock Drilling Equipment - Drill Rods with Tapered Connection for Percussive Drilling Second Edition Rock Drilling - Extension Drill-Steel Equipment for Percussive Long-Hole Drilling - Reverse-Buttress-Threaded Equipments 1 1/16 and (27 and 32 mm) First Edition Rock Drilling - Extension Drill-Steel Equipment for Percussive Long-Hole Drilling - Reverse-Buttress-Threaded Equipments 1 1/2 to 2 1/2 in (38 to 64 mm) First Edition Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage Fourth Edition Road vehicles ù Mechanical couplings between tractors and semi-trailers ù Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers First edition Road Vehicles - Mechanical Coupling between Tractors and Semi-Trailers - Interchangeability Road Vehicles - Mechanical Coupling between Tractors and Semi-Trailers - Interchangeability Third Edition Road vehicles Pneumatic braking connections between motor vehicles and towed vehicles Interchangeability Third Edition Dictation Equipment - Basic Operating Requirements Second Edition Cheese and processed cheese products Determination of fat content Gravimetric method (Reference method) Third Edition; IDF 5 Dried Milk and Dried Milk Products - Determination of Fat Content - Gravimetric Method (Reference Method) Third Edition Evaporated Milk and Sweetened Condensed Milk - Determination of Fat Content - Gravimetric Method (Reference Method) Third Edition Butter - Determination of Salt Content Third Edition; IDF 12 Butter - Determination of the Refractive Index of the Fat (Reference Method) Second Edition; IDF 7: 2006

ISO ISO ISO ISO ISO ISO ISO

1740 1741 1742 1743 1745 1746 1749

Milkfat products and butter - determination of fat acidity (Reference method) Third edition Dextrose - Determination of Loss in Mass on Drying - Vacuum Oven Method First Edition; CEN EN ISO 1741: 1994 Glucose Syrups - Determination of Dry Matter - Vacuum Oven Method First Edition Glucose Syrup - Determination of Dry Matter Content - Refractive Index Method Second Edition Information Processing - Basic Mode Control Procedures for Data Communication Systems First Edition Rubber or Plastics Hoses and Tubing - Bending Tests Third Edition; Corrigendum 1: 05/01/1999 Aircraft - Elastomeric Sealing Rings - Packaging and Identification First Edition Pesticides and Other Agrochemicals - Common Names Produits Phytosanitaires Et Assimiles - Noms Communs First Edition; Amendment 1-1982; Addendum 1-1983; Addendum 2-1983; Replaces ISO R 116: 1959 and ISO R 219: 1961 and ISO R 258: 1962; Amendment 2: 11-15-99; Amendment 3 12/01/2001 Shipbuilding and Marine Structures - Ships┤ Side Scuttles Second Edition Photography - Cameras Using 35 mm Film and Roll Film - Picture Sizes Fourth Edition; Corrigendum 1: 03/01/2002 Photography - Projector Slides - Dimensions Second Edition Industrial Trucks - Dimensions of Stillages - Connection Gauge First Edition Personal Photographic Dosemeters Second Edition Paper, Board and Pulps - Determination of Residue (Ash) on Ignition at 525 Degrees C Second Edition

ISO ISO ISO ISO ISO ISO ISO

1750 1751 1754 1755 1756 1757 1762

ISO ISO ISO

1763 1765 1766

ISO ISO ISO ISO ISO ISO ISO

1768 1769 1770 1771 1772 1773 1775

ISO

1776

Carpets - Determination of Number of Tufts and/or Loops per Unit Length and per Unit Area Second Edition; AS/NZS 2111.9: 1996 Machine-Made Textile Floor Coverings - Determination of Thickness Second Edition; AS/NZS 2111.1: 1996 Textile Floor Coverings - Determination of Thickness of Pile Above the Substrate Third Edition Glass Hydrometers - Conventional Value for the Thermal Cubic Expansion Coefficient (for Use in the Preparation of Measurement Tables for Liquids) First Edition Laboratory Glassware - Pipettes - Colour Coding First Edition Solid-Stem General Purpose Thermometers First Edition; Amendment 1-1983 Enclosed-Scale General Purpose Thermometers First Edition; Amendment 1-1983 Laboratory Crucibles in Porcelain and Silica First Edition Laboratory Glassware - Narrow-Necked Boiling Flasks Second Edition Porcelain Laboratory Apparatus - Requirements and Methods of Test First Edition Glass - Resistance to Attack by Hydrochloric Acid at 100 Degrees Celsius - Flame Emission or Flame Atomic Absorption Spectrometric Method First Edition

ISO ISO ISO ISO

1780 1781 1783 1784

Cinematography - Motion-Picture Camera Cartridge, 8 mm Type S Model I - Aperture, Camera Aperture Profile, Film Position, Pressure Pad and Pressure Pad Flatness - Dimensions and Specifications Second Edition; Corrected and Reprinted - 1984 Cinematography - Projector Usage of 8 mm Type S Motion-Picture Film for Direct Front Projection Second Edition Magnesium Alloys - Determination of Zinc - Volumetric Method First Edition Aluminium Alloys - Determination of Zinc - EDTA Titrimetric Method First Edition

ISO ISO ISO

1785 1787 1791

ISO ISO ISO ISO

1793 1795 1797-1 1797-2

ISO ISO

1798 1802

ISO ISO ISO ISO

1803 1804 1805 1806

ISO ISO ISO

1807 1809 1810

ISO

1811-1

ISO ISO

1811-2 1812

ISO

1813

ISO

1815

ISO ISO ISO ISO ISO

1816 1817 1819 1823-1 1823-2

Cinematography - Printed 8 mm, Type S, Image Area on 16 mm Motion-Picture Film Perforated 8 mm, Type S (1-4) - Position and Dimensions Second Edition Cinematography - Camera Usage of 8 mm Type S Motion-Picture Film - Specifications Second Edition Building Construction - Modular Coordination - Vocabulary Second Edition; PNS 637: 1988 Cinematography - Reels for 16 mm Motion-Picture Projectors (up to and Including 610 m Capacity: 38 cm Size) - Dimensions Second Edition Rubber, Raw Natural and Raw Synthetic - Sampling and Further Preparative Procedures Fourth Edition Dental Rotary Instruments - Shanks - Part 1: Shanks Made of Metals First Edition; Amendment 1-1997 Dental Rotary Instruments - Shanks - Part 2: Shanks Made of Plastics First Edition; CAN/CSA-Z349.50.2-94 Flexible Cellular Polymeric Materials - Determination of Tensile Strength and Elongation at Break Third Edition; Corrigendum 1: 3/15/2003 Natural Rubber Latex Concentrate - Determination of Boric Acid Content Third Edition Building Construction - Tolerances - Expression of Dimensional Accuracy - Principles and Terminology First Edition; Cancels and Replaces ISO 4464: 1980 Doors - Terminology First Edition Fishing nets Determination of breaking force and knot breaking force of netting yarns Second Edition Fishing Nets - Determination of Mesh Breaking Load of Netting Second Edition Continuous Mechanical Handling Equipment for Loose Bulk Materials - Oscillating Conveyors and Shaking or Reciprocating Feeders with Rectangular or Trapezoidal Trough First Edition Textile Machinery and Accessories - Types of Formers for Yarn Packages - Nomenclature First Edition Copper Alloys - Determination of Nickel (Low Contents) - Dimethylglyoxime Spectrophotometric Method First Edition Copper and Copper Alloys - Selection and Preparation of Samples for Chemical Analysis - Part 1: Sampling of Cast Unwrought Products First Edition Copper and Copper Alloys - Selection and Preparation of Samples for Chemical Analysis - Part 2: Sampling of Wrought Products and Castings First Edition Copper Alloys - Determination of Iron Content - 1,10-Phenanthroline Spectrophotometric Method First Edition Belt Drives - V-Ribbed Belts, Joined V-Belts and V-Belts Including Wide Section Belts and Hexagonal Belts - Electrical Conductivity of Antistatic Belts: Characteristics and Methods of Test Third Edition; Corrected and Reprinted 04/15/1999 Continuous Mechanical Handling Equipment for Loose Bulk Materials - Vibrating Feeders and Conveyors with Tubular Trough First Edition Continuous Mechanical Handling Equipment for Loose Bulk Materials and Unit Loads - Belt Conveyors - Basic Characteristics of Motorized Driving Pulleys First Edition Rubber, Vulcanized - Determination of the Effect of Liquids Fourth Edition; Corrected Version 2/15/2006 Continuous Mechanical Handling Equipment - Safety Code - General Rules First Edition Rubber Hoses and Hose Assemblies - Part 1: On-Shore Oil Suction and Discharge - Specification First Edition Rubber Hoses and Hose Assemblies - Part 2: Ship/Dockside Discharge - Specification First Edition

ISO

1825

ISO ISO ISO ISO ISO ISO

1827 1829 1830 1831 1832 CORR 1 1832

ISO ISO

1833-1 1833-2

ISO

1833-3

ISO

1833-4

ISO

1833-5

ISO

1833-6

ISO

1833-7

Rubber Hoses and Hose Assemblies for Aircraft Ground Fuelling and Defuelling - Specification Second Edition Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods Third Edition Selection of Tolerance Zones for General Purposes First Edition Paper, board and pulps Determination of acid-soluble manganese Second Edition Printing Specifications for Optical Character Recognition First Edition Indexable inserts for cutting tools ù Designation TECHNICAL CORRIGENDUM 1 Fourth Edition Indexable inserts for cutting tools ù Designation Fourth Edition Textiles Quantitative chemical analysis Part 1: General principles of testing First Edition;:1977; Together with ISO 1833-3 thru ISO 1833-19 replaces ISO 1833:1977 Textiles Quantitative chemical analysis Part 2: Ternary fibre mixtures First Edition;: 1976 [Replaced: ISO 5088] Textiles Quantitative chemical analysis Part 3: Mixtures of acetate and certain other fibres (method using acetone) First Edition; Together with ISO 1833-1: 2006, ISO 1833-4 thru ISO 1833-19: 2006 replaces ISO 1833: 1977 Textiles Quantitative chemical analysis Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) First Edition; Together with ISO 1833-1: 2006, ISO 1833-3 thru ISO 1833-19: 2006 replaces ISO 1833: 1977 Textiles Quantitative chemical analysis Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) First Edition; Together with ISO 1833-1: 2006, ISO 1833-3 thru ISO 1833-4: 2006, ISO 1833-6 thru ISO 1833-19: 2006 replaces ISO 1833: 1977 Textiles ù Quantitative chemical analysis ù Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) First Edition Textiles Quantitative chemical analysis Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) First Edition; Together with ISO 1833-1: 2006, ISO 1833-3 thru ISO 1833-6: 2006, ISO 1833-8 thru ISO 1833-19: 2006 replaces ISO 1833: 1977

ISO

1833-8

Textiles Quantitative chemical analysis Part 8: Mixtures of acetate and triacetate fibres (method using acetone) First Edition; Together with ISO 1833-1: 2006, ISO 1833-3 thru ISO 1833-7: 2006, ISO 1833-9 thru ISO 1833-19: 2006 replaces ISO 1833: 1977

ISO

1833-9

ISO

1833-10

ISO

1833-11

Textiles Quantitative chemical analysis Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) First Edition; Together with ISO 1833-1:2006, ISO 1833-3 thru ISO 1833-8:2006, ISO 1833-10 thru ISO 1833-19:2006 replaces ISO 1833:1977 Textiles Quantitative chemical analysis Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) First Edition; Together with ISO 1833-1 thru ISO 1833-9 and ISO 1833-11 thru ISO 1883-19 Supersedes ISO 1833:77 Textiles Quantitative chemical analysis Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) First Edition; Together with ISO 1833-1 thru ISO 1833-10 and ISO 1833-12 thru ISO 1883-19 Supersedes ISO 1833:77

ISO

1833-12

ISO

1833-13

ISO

1833-14

Textiles Quantitative chemical analysis Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) First Edition; Together with ISO 1833-1 thru ISO 1833-11 and ISO 1833-13 thru ISO 1883-19 Supersedes ISO 1833:77 Textiles Quantitative chemical analysis Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) First Edition; Together with ISO 1833-1 thru ISO 1833-12 and ISO 1833-14 thru ISO 1883-19 Supersedes ISO 1833:77 Textiles Quantitative chemical analysis Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) First Edition; Together with ISO 1833-1 thru ISO 1833-13 and ISO 1833-15 thru ISO 1883-19 Supersedes ISO 1833:77

ISO

1833-15

Textiles Quantitative chemical analysis Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) First Edition; Together with ISO 1833-1 thru ISO 1833-14 and ISO 1833-16 thru ISO 1883-19 Supersedes ISO 1833:77

ISO

1833-16

ISO

1833-17

ISO

1833-18

ISO

1833-19

ISO ISO ISO ISO ISO ISO ISO ISO

1833-21 1834 1835 1837 1838 1839 1840 1841-1

ISO ISO ISO ISO ISO

1841-2 1842 1853 1854 1856 AMD 1

Textiles Quantitative chemical analysis Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) First Edition; Together with ISO 1833-1 thru ISO 1833-15 and ISO 1833-17 thru ISO 1883-19 Supersedes ISO 1833:77 Textiles Quantitative chemical analysis Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) First Edition; Together with ISO 1833-1 thru ISO 1833-16 and ISO 1833-18 thru ISO 1883-19 Supersedes ISO 1833:77 Textiles Quantitative chemical analysis Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) First Edition; Together with ISO 1833-1: 2006, ISO 1833-3 thru ISO 1833-17: 2006 and ISO 1833-19: 2006 replaces ISO 1833: 1977 Textiles - Quantitative chemical analysis - Part 19: Mixtures of cellulose fibres and asbestos (method by heating) First Edition; Together with ISO 1833-1: 2006, ISO 1833-3 thru ISO 1833-18: 2006 replaces ISO 1833: 1977 Textiles Quantitative chemical analysis Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) First Edition Short Link Chain for Lifting Purposes - General Conditions of Acceptance Second Edition Short Link Chain for Lifting Purposes - Grade M (4), Non-Calibrated, for Chain Slings, Etc. First Edition Lifting Hooks - Nomenclature Second Edition Fresh Pineapples - Storage and Transport Second Edition Tea - Sampling First Edition Definitions of Living Animals for Slaughter - Porcines First Edition Meat and Meat Products - Determination of Chloride Content - Part 1: Volhard Method First Edition; Replaces ISO 1841 Meat and Meat Products - Determination of Chloride Content - Part 2: Potentiometric Method First Edition; Replaces ISO 1841 Fruit and Vegetable Products - Determination of pH Second Edition Conducting and Dissipative Rubbers, Vulcanized or Thermoplastic - Measurement of Resistivity Second Edition Whey Cheese - Determination of Fat Content - Gravimetric Method (Reference Method) Third Edition Flexible cellular polymeric materials ù Determination of compression set Third Edition

ISO

1856

ISO

1858

ISO ISO

1859 1860

ISO

1861

ISO

1862

ISO

1863

ISO

1864

ISO ISO

1865 1871

ISO

1872-1

ISO

1872-2

ISO

1873-1

ISO

1873-2

ISO

1874-1

ISO ISO ISO ISO ISO ISO ISO ISO

1874-2 1875 1887 1888 1889 1890 1891 1893

Flexible Cellular Polymeric Materials - Determination of Compression Set Third Edition Information Processing - General Purpose Hubs and Reels, with 76 mm (3 in) Centrehole, for Magnetic Tape Used in Interchange Instrumentation Applications First Edition Information Processing - Unrecorded Magnetic Tapes for Interchange Instrumentation Applications - General Dimensional Requirements First Edition Information Processing - Precision Reels for Magnetic Tape Used in Interchange Instrumentation Applications Third Edition Information Processing - 7-Track, 12,7 mm (0.5 in) Wide Magnetic Tape for Information Interchange Recorded at 8 rpmm (200 rpi) First Edition Information Processing - 9-Track, 12,7 mm (0.5 in) Wide Magnetic Tape for Information Interchange Recorded at 8 rpmm (200 rpi) First Edition Information Processing - 9-Track, 12,7 mm (0,5 in) Wide Magnetic Tape for Information Interchange Using NRZ1 at 32 ftpmm (800 ftpi) - 32 cpmm (800 cpi) Second Edition Information Technology - Unrecorded 12,7 mm (0,5 in) Wide Magnetic Tape for Information Interchange - 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3 200 ftpi) Phase Encoded and 356 ftpmm (9 042 ftpi), NRZ1 Fourth Edition; CEN EN 21864: 1993 Textile Machinery and Accessories - Serrated Bars for Mechanical Warp Stop Motions - Designations of Dimensions, and Dimensions of Cross-Section First Edition Agricultural Food Products - General Directions for the Determination of Nitrogen by the Kjeldahl Method First Edition Plastics - Polyethylene (PE) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Second Edition Plastics ù Polyethylene (PE) moulding and extrusion materials ù Part 2: Preparation of test specimens and determination of properties Third Edition Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Fourth Edition; CEN EN ISO 1873-1: 1995 Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties Third Edition Plastics - Polyamide (PA) Moulding and Extrusion Materials - Part 1: Designation Second Edition; Corrected and Reprinted - 1992 Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties Third Edition Plastics - Plasticized Cellulose Acetate - Determination of Matter Extractable by Diethyl Ether First Edition Textile Glass - Determination of Combustible-Matter Content Third Edition Textile glass Staple fibres or filaments Determination of average diameter Third Edition Reinforcement Yarns - Determination of Linear Density Third Edition; Replaces ISO 10120: 1991 Reinforcement Yarns - Determination of Twist Third Edition Bolts, Screws, Nuts and Accessories - Terminology and Nomenclature First Edition; Amendment Slip-1980 Refractory products ù Determination of refractoriness under load ù Differential method with rising temperature Third Edition

ISO ISO ISO

1919 1920 1920-1

ISO ISO

1920-2 1920-3

ISO ISO ISO ISO ISO

1920-4 1920-5 1920-6 1920-7 1922

ISO

1923

ISO ISO ISO ISO ISO

1924-2 1924-3 1925 1926 1927

ISO ISO

1928 1929

ISO

1940-1 CORR 1

ISO ISO

1940-1 1940-2

ISO

1942-1

Road Vehicles - M14 X 1,25 Spark-Plugs with Flat Seating and Their Cylinder Head Housings Fifth Edition; Technical Corrigendum 1: 02-15-1999 Concrete Tests - Dimensions, Tolerances and Applicability of Test Specimens First Edition [Replaced By: ISO 1920-3] Testing of concrete Part 1: Sampling of fresh concrete First Edition; Replaces ISO 2736-1:1986 Testing of concrete Part 2: Properties of fresh concrete First Edition; Replaces ISO 4109:1980, ISO 4110:1979, ISO 4111:1979, ISO 4848:1980, ISO 6276:1982 Testing of concrete Part 3: Making and curing test specimens First Edition; [Replaced: ISO 1920, ISO 2736-2] Testing of concrete - Part 4: Strength of hardened concrete First Edition; Replaces ISO 4012:1978, ISO 4013:1978 and ISO 4108:1980 Testing of concrete Part 5: Properties of hardened concrete other than strength First Edition; Replaces ISO 6275:1982 Testing of concrete Part 6: Sampling, preparing and testing of concrete cores First Edition Testing of concrete Part 7: Non-destructive tests on hardened concrete First Edition Rigid Cellular Plastics - Determination of Shear Strength Third Edition Cellular Plastics and Rubbers - Determination of Linear Dimensions Second Edition; CEN PREN 21923: 1994; CEN EN ISO 1923: 1995 Paper and Board - Determination of Tensile Properties - Part 2: Constant Rate of Elongation Method Second Edition; CEN EN ISO 1924-2: 1995 Paper and board Determination of tensile properties Part 3: Constant rate of elongation method (100 mm/min) First Edition Mechanical Vibration - Balancing - Vocabulary Vibrations Mecaniques - Equilibrage - Vocabulaire Fourth Edition Rigid cellular plastics Determination of tensile properties Third Edition Prepared Unshaped Refractory Materials (Dense and Insulating) - Classification Second Edition Solid Mineral Fuels - Determination of Gross Calorific Value by the Bomb Calorimetric Method, and Calculation of Net Calorific Value Second Edition Abrasive Belts - Dimensions, Tolerances and Designation Second Edition Mechanical vibration ù Balance quality requirements for rotors in a constant (rigid) state ù Part 1: Specification and verification of balance tolerances TECHNICAL CORRIGENDUM 1 Second Edition Mechanical vibration ù Balance quality requirements for rotors in a constant (rigid) state ù Part 1: Specification and verification of balance tolerances Second Edition Mechanical Vibration - Balance Quality Requirements of Rigid Rotors - Part 2: Balance Errors First Edition Dental Vocabulary - Part 1: General and Clinical Terms Second Edition; Amendment 1-1992; Amendment 2-1992; Amendment 31993; Amendment 5-1993; PNS 1248-1: 1994

ISO ISO

1942-2 1942-3

Dental Vocabulary - Part 2: Dental Materials Second Edition; Amendment 1-2: 1992; CEN EN 21942-2: 1992; PNS 1248-2: 1994 Dental Vocabulary - Part 3: Dental Instruments Second Edition; Amendment 1-2: 1992; PNS 1248-3: 1994

ISO

1942-4

Dental Vocabulary - Part 4: Dental Equipment Second Edition; Amendment 1-1992; CEN EN 21942-4: 1993; PNS 1248-4: 1994

ISO

1942-5

ISO ISO ISO ISO

1948 1949 1950 1951

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

1952 1953 1954 1955 1956-1 1956-2 1957 1964 1965 1966 1967 1968 1969 1971

ISO ISO

1973 1974

ISO ISO ISO

1975 1976 1977

Dental Vocabulary - Part 5: Terms Associated with Testing Second Edition; CEN EN ISO 1942-5: 1994; PNS 1248-5: 1994 Photography - Front Lens Barrels up to 127 mm - Dimensions Important to the Connection of Auxiliaries Second Edition; ANSI PH3.104-1992 Aircraft - Electrical Connectors - Design Requirements Second Edition Aircraft - Identification of Servicing, Maintenance, Ground Handling and Safety/Hazard Points First Edition Presentation/representation of entries in dictionaries ù Requirements, recommendations and information Third Edition Brown Coals and Lignites - Method of Extraction for the Determination of Sodium and Potassium Soluble in Dilute Hydrochloric Acid First Edition Hard Coal - Size Analysis by Sieving Second Edition 1999 Plywood - Tolerances on Dimensions First Edition Citrus Fruits and Derived Products - Determination of Essential Oils Content (Reference Method) First Edition Fruits and Vegetables - Morphological and Structural Terminology - Part 1 First Edition Fruits and Vegetables - Morphological and Structural Terminology - Part 2 First Edition Machine-Made Textile Floor Coverings - Selection and Cutting of Specimens for Physical Tests Third Edition Shipbuilding - Indication of Details on the General Arrangement Plans of Ships Second Edition Aluminium Terminal Ends for Crimping to Aircraft Aluminium Electrical Cables First Edition Crimped Joints for Aircraft Electrical Cables First Edition Aircraft - Fire-Resisting Electrical Cables - Dimensions, Conductor Resistance and Mass First Edition Fibre ropes and cordage Vocabulary Cordages en fibres et articles de corderie Vocabulaire Fourth Edition Fibre ropes Polyethylene 3- and 4-strand ropes Third Edition Aircraft - Accessory Drives and Mounting Pads First Edition Textile Fibres - Determination of Linear Density - Gravimetric Method and Vibroscope Method Second Edition; CEN EN ISO 1973: 1995 Paper - Determination of Tearing Resistance (Elmendorf Method) Third Edition; CEN EN 21974: 1994; PNS 316: 1989) Magnesium and Magnesium Alloys - Determination of Silicon - Spectrophotometric Method with the Reduced Silicomolybdic Complex First Edition Zinc Alloys - Determination of Copper Content - Electrolytic Method First Edition Conveyor chains, attachments and sprockets Second Edition

ISO

1984-1

Test Conditions for Manually Controlled Milling Machines with Table of Fixed Height - Testing of the Accuracy - Part 1: Machines with Horizontal Spindle First Edition; Together with ISO 1984-2:2001, Cancels and Replaces ISO 1984:1982 and ISO 1984-0:1984

ISO

1984-2

ISO

1985

Test Conditions for Manually Controlled Milling Machines with Table of Fixed Height - Testing of the Accuracy - Part 2: Machines with Vertical Spindle First Edition; Together with ISO 1984-1:2001, Cancels and Replaces ISO 1984:1982 and ISO 1984-0:1984 Machine Tools - Test Conditions for Surface Grinding Machines with Vertical Grinding Wheel Spindle and Reciprocating Table Testing of the Accuracy Third Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

1986-1 1988 1989 CORR 2 1989 CORR 1 1989 1990-1 1990-2 1991-1 1991-2 1992-2 1992-3 1992-8 1995

ISO

1996-1

ISO ISO

1996-2 1997

ISO

1998-1

ISO

1998-2

ISO ISO

1998-3 1998-4

ISO

1998-5

ISO

1998-6

ISO

1998-7

ISO

1998-99

ISO

1999

Test Conditions for Surface Grinding Machines with Horizontal Grinding Wheel Spindle and Reciprocating Table - Testing of Accuracy - Part 1: Machines with a Table Length of up to 1 600 mm First Edition; Replaces ISO 1986 Hard Coal - Sampling First Edition; Amendment-1975 Information technology ù Programming languages ù COBOL TECHNICAL CORRIGENDUM 2 First Edition Information technology Programming languages COBOL TECHNICAL CORRIGENDUM 1 First Edition Information technology Programming languages COBOL First Edition Fruits - Nomenclature - First List First Edition; PNS 1147-1: 1993 Fruits - Nomenclature - Second List First Edition; PNS 1146: 1993 Vegetables - Nomenclature - First List First Edition; PNS 1145: 1993 Vegetables - Nomenclature - Part 2: Second List Second Edition Commercial Refrigerated Cabinets - Methods of Test - Part 2: General Test Conditions First Edition; Amendment 1-1979 Commercial Refrigerated Cabinets - Methods of Test - Part 3: Temperature Test First Edition; Amendment 1-1980 Commercial Refrigerated Cabinets - Test Methods - Part VIII: Test for Accidental Mechanical Contact First Edition Aromatic Hydrocarbons - Sampling First Edition Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures Second Edition Acoustics ù Description, measurement and assessment of environmental noise ù Part 2: Determination of environmental noise levels Second Edition [Replaced: ISO 1996-1, ISO 1996-1, ISO 1996-3] Granulated Cork and Cork Powder - Classification, Properties and Packing Second Edition Petroleum Industry - Terminology - Part 1: Raw Materials and Products Industrie Petroliere - Terminologie - Parte 1: Matieres Premieres Et Produits Second Edition; Corrigendum 1 07/15/1999 Petroleum Industry - Terminology - Part 2: Properties and Tests Industrie Petroliere - Terminologie - Partie 2: Proprietes Et Essais Second Edition Petroleum Industry - Terminology - Part 3: Exploration and Production Industrie Petroliere - Terminologie - Partie 3: Exploration Et Production First Edition Petroleum Industry - Terminology - Part 4: Refining Industrie Petroliere - Terminologie - Partie 4: Raffinage First Edition Petroleum Industry - Terminology - Part 5: Transport, Storage, Distribution Industrie Petroliere - Terminologie - Parte 5: Transport, Stockage, Distribution First Edition; Corrigendum 1 07/15/1999 Petroleum Industry - Terminology - Part 6: Measurement Industrie Petroliere - Terminologie - Partie 6: Mesurage First Edition Petroleum Industry - Terminology - Part 7: Miscellaneous Terms Industrie Petroliere - Terminologie - Partie 7: Termes Divers First Edition Petroleum Industry - Terminology - Part 99: General and Index Industrie Petroliere - Terminologie - Partie 99: Generalites Et Index First Edition Acoustics - Determination of Occupational Noise Exposure and Estimation of Noise-Induced Hearing Impairment Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO

2000 2004 2005 2006 2007 2009 2010 2012 2016

ISO

2017-1

ISO

2020-1

ISO

2020-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO

2022 2023 2026 2027 2028 2030 2031 2032 2033

ISO ISO ISO ISO ISO ISO ISO ISO

2035 2036 2037 2039-1 2039-2 2040 2041 2042

ISO

2044

Rubber, raw natural Guidelines for the specification of technically specified rubber (TSR) Sixth Edition Natural Rubber Latex Concentrate - Centrifuged or Creamed, Ammonia-Preserved Types - Specification Fourth Edition Rubber Latex, Natural, Concentrate - Determination of Sludge Content Third Edition; Amendment 1: 02/01/2006 Rubber Latex, Synthetic - Determination of High-Speed Mechanical Stability Second Edition Rubber, Unvulcanized - Determination of Plasticity - Rapid-Plastimeter Method Fourth Edition Slotted Countersunk Flat Head Screws (Common Head Style) - Product Grade A Third Edition; CEN EN ISO 2009: 1994 Countersunk Slotted Raised Head Screws (Common Head Style) - Product Grade A Third Edition; CEN EN ISO 2010: 1994 Textile Machinery and Accessories - Cone Sectional Warping Machines - Maximum Usable Width First Edition Capillary Solder Fittings for Copper Tubes - Assembly Dimensions and Tests First Edition Mechanical vibration and shock Resilient mounting systems Part 1: Technical information to be exchanged for the application of isolation systems First Edition; Together with ISO 2017-2 Replaces ISO 2017: 1982 Aerospace - Preformed Flexible Steel Wire Rope for Aircraft Controls - Part 1: Dimensions and Loads First Edition; Together with ISO 2020-2, It Cancels and Replaces ISO 2020: 1984; Reprinted 12/01/1997 Aerospace - Preformed Flexible Steel Wire Rope for Aircraft Controls - Part 2: Technical Specification First Edition; Together with ISO 2020-1, It Cancels and Replaces ISO 2020: 1984; Reprinted 12/01/1997 Information Technology - Character Code Structure and Extension Techniques Fourth Edition; Technical Corrigendum 1: 04/15/1999 Rubber Footwear - Lined Industrial Vulcanized-Rubber Boots - Specification Second Edition: Corrigendum 1: 12/15/2002 Aircraft - Connections for Starting Engines by Air First Edition Natural Rubber Latex Concentrate, Evaporated, Preserved - Specification Third Edition Synthetic Rubber Latex - Preparation of Dry Polymer Fourth Edition Granulated Cork - Size Analysis by Mechanical Sieving Second Edition Granulated Cork - Determination of Bulk Density Second Edition Heat-Resisting Equipment Wires for Aircraft First Edition Information Processing - Coding of Machine Readable Characters (MICR and OCR) Second Edition Unplasticized Polyvinyl Chloride (PVC) Moulded Fittings for Elastic Sealing Ring Type Joints for Use under Pressure - PressureResistance Test First Edition Wood for Manufacture of Wood Flooring - Symbols for Marking According to Species First Edition Stainless Steel Tubes for the Food Industry Second Edition Plastics - Determination of Hardness - Part 1: Ball Indentation Method Third Edition Plastics - Determination of Hardness - Part 2: Rockwell Hardness Second Edition Strontium Chromate Pigments for Paints First Edition Vibration and Shock - Vocabulary Second Edition Aircraft Electrical Circuit Diagrams First Edition Unplasticized Polyvinyl Chloride (PVC) Injection-Moulded Solvent-Welded Socket Fittings for Use with Pressure Pipe - Hydraulic Internal Pressure Test First Edition

ISO ISO ISO

2045 2046 2047

ISO ISO ISO

2048 2049 2057

ISO ISO

2060 2061

ISO ISO

2062 2063

ISO ISO ISO ISO

2064 2066 2067 2068

ISO ISO

2069 2070

ISO

2071

ISO

2072

ISO ISO ISO ISO ISO ISO ISO ISO ISO

2073 2074 2076 2077 2078 2079 2080 2081 2082

Single Sockets for Unplasticized Poly(Vinyl Chloride) (PVC-U) and Chlorinated Poly(Vinyl Chloride) (PVC-C) Pressure Pipes with Elastic Sealing Ring Type Joints - Minimum Depths of Engagement Second Edition Gaseous Breathing Oxygen Supplies for Aircraft First Edition Information Processing - Graphical Representations for the Control Characters of the 7-Bit Coded Character Set First Edition Double-Socket Fittings for Unplasticized Poly(Vinyl Chloride) (PVC-U) Pressure Pipes with Elastic Sealing Ring Type Joints Minimum Depths of Engagement Second Edition Petroleum Products - Determination of Colour (ASTM Scale) Second Edition Agricultural Tractors - Remote Control Hydraulic Cylinders for Trailed Implements Second Edition Textiles - Yarn from Packages - Determination of Linear Density (Mass per Unit Length) by the Skein Method Second Edition Textiles - Determination of Twist in Yarns - Direct Counting Method Second Edition; CEN EN ISO 2061: 1995 Textiles - Yarns from Packages - Determination of Single-End Breaking Force and Elongation at Break Second Edition; Corrected and Reprinted - 1995; CEN EN ISO 2062: 1995 Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys Third Edition Metallic and Other Inorganic Coatings - Definitions and Conventions Concerning the Measurement of Thickness Third Edition; CEN EN ISO 2064: 1994; PNS 670: 1990 Resilient floor coverings Determination of moisture content of agglomerated composition cork Third Edition Granulated Cork - Sampling Third Edition Barium Chromate Pigments for Paints First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Calcium Content - Flame Atomic Absorption Method First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Calcium Content Second Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Zinc Content - Flame Atomic Absorption Method First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Zinc Content - PAN Photometric Method First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Preparation of Solution for Analysis - Method by Hydrochloric Acid Attack under Pressure First Edition Plywood - Vocabulary First Edition Textiles - Man-Made Fibres - Generic Names Fourth Edition Pure Expanded Corkboard - Determination of the Modulus of Rupture by Bending First Edition; Textile Glass - Yarns - Designation Fifth Edition; CEN EN ISO 2078: 1994 Surface Treatment and Metallic Coatings - General Classification of Terms Second Edition Electroplating and Related Processes - Vocabulary Second Edition Metallic Coatings - Electroplated Coatings of Zinc on Iron or Steel Second Edition Metallic Coatings - Electroplated Coatings of Cadmium on Iron or Steel Second Edition

ISO ISO ISO ISO ISO ISO

2085 2093 2094 2096 2100 2103

ISO ISO

2106 2107

ISO ISO ISO

2107 2108 2109

ISO ISO

2110 2113

ISO

2114

ISO ISO ISO

2115 2120 2121

ISO

2122

ISO ISO ISO ISO

2128 2131 2132 2133

ISO ISO

2135 2137

ISO

2139

Anodizing of Aluminium and Its Alloys - Check of Continuity of Thin Anodic Oxide Coatings - Copper Sulphate Test First Edition Electroplated Coatings of Tin - Specification and Test Methods Second Edition Textile Floor Coverings - Determination of Thickness Loss under Dynamic Loading Third Edition Glycerols for Industrial Use - Methods of Sampling First Edition Aircraft - Electrical Connectors - Tests Second Edition Loads Due to Use and Occupancy in Residential and Public Buildings First Edition; PNS 1089: 1991 Anodizing of Aluminium and Its Alloys - Determination of Mass per Unit Area (Surface Density) of Anodic Oxide Coatings Gravimetric Method Second Edition; Amendment 1-1983 Aluminium and aluminium alloys ù Wrought products ù Temper designations Third Edition Aluminium and aluminium alloys ù Wrought products ù Temper designations Aluminium et alliages d'aluminium ù Produits corroyÚs ù DÚsignation des Útats mÚtallurgiques Third Edition Information and documentation - International Standard Book Number (ISBN) Fourth edition Continuous Mechanical Handling Equipment - Light Duty Belt Conveyors for Loose Bulk Materials First Edition Information Technology - Data Communication - 25-Pole DTE/DCE Interface Connector and Contact Number Assignments Amendment 1: Interface Connector and Contact Assignments for DTE/DCE Interface for Data Signalling Rates Above 20 000 Bit/s Third Edition; Amendment 1-1991 Reinforcement fibres - Woven fabrics - Basis for a specification Second Edition; Corrigendum 1: 2/15/2003 Plastics - (Polyester Resins) and Paints and Varnishes (Binders) - Determination of Partial Acid Value and Total Acid Value Third Edition; Replaces ISO 3682 Plastics - Polymer Dispersions - Determination of White Point Temperature and Minimum Film-Forming Temperature Third Edition Liquid Chlorine for Industrial Use - Determination of the Content of Chlorine by Volume in the Vaporized Product First Edition Liquid Chlorine for Industrial Use - Determination of Water Content - Gravimetric Method First Edition Sodium and Potassium Silicates for Industrial Use - Preparation of Solution of Products Not Easily Soluble in Boiling Water and Determination of Matter Insoluble in Water First Edition Anodizing of Aluminium and Its Alloys - Determination of Thickness of Anodic Oxide Coatings - Non-Destructive Measurement by Split-Beam Microscope First Edition Surface Active Agents - Simplified Classification First Edition Offset Duplicators Attachment Features of Plates First Edition; Amendment 1-1975 Stencils for Duplicators - Minimum Overprint and Attachment Features Second Edition Anodizing of Aluminium and Its Alloys - Accelerated Test of Light Fastness of Coloured Anodic Oxide Coatings Using Artificial Light Second Edition Petroleum Products - Lubricating Grease and Petrolatum - Determination of Cone Penetration Second Edition Continuous Mechanical Handling Equipment for Loose Bulk Materials - Oscillating Conveyors and Shaking or Reciprocating Feeders with Tubular Trough First Edition

ISO

2140

Continuous Mechanical Handling Equipment for Loose Bulk Materials - Apron Conveyors First Edition

ISO

2142

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

2143 2144 2145 2148 2151 2155 2156 2157 2160 2162-1

ISO

2162-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

2162-3 2164 2165 2166 2167 2168 2169 2171 2172 2173 2174

Wrought Aluminium, Magnesium and Their Alloys - Selection of Specimens and Test Pieces for Mechanical Testing First Edition Anodizing of Aluminium and Its Alloys - Estimation of Loss of Absorptive Power of Anodic Oxide Coatings After Sealing - Dye Spot Test with Prior Acid Treatment First Edition Paper, Board and Pulps - Determination of Residue (Ash) on Ignition at 900 Degrees C Fourth Edition Documentation - Numbering of Divisions and Subdivisions in Written Documents Second Edition Continuous Handling Equipment - Nomenclature First Edition Acoustics Noise test code for compressors and vacuum pumps Engineering method (Grade 2) First Edition Aircraft - Fire-Resisting Electrical Cables - Performance Requirements First Edition Aircraft - Fire-Resisting Electrical Cables - Methods of Test First Edition Dental Rotary Instruments - Nominal Diameters and Designation Code Number Third Edition; CAN/CSA-Z349.49-94 Petroleum Products - Corrosiveness to Copper - Copper Strip Test Third Edition Technical Product Documentation - Springs - Part 1: Simplified Representation First Edition; CEN EN 2162-1: 1996 Technical Product Documentation - Springs - Part 2: Presentation of Data for Cylindrical Helical Compression Springs First Edition; CEN EN ISO 2162-2: 1996 Technical Product Documentation - Springs - Part 3: Vocabulary First Edition; Corrected and Reprinted - 1996; CEN EN ISO 2162-3: 1996 Pulses - Determination of Glycosidic Hydrocyanic Acid First Edition; Erratum-1981 Ware Potatoes - Guide to Storage First Edition Carrots - Guide to Storage Second Edition Round-Headed Cabbage - Guide to Cold Storage and Refrigerated Transport Second Edition Table Grapes - Guide to Cold Storage First Edition Fruits and Vegetables - Physical Conditions in Cold Stores - Definitions and Measurement Second Edition Cereals and Milled Cereal Products - Determination of Total Ash Third Edition Fruit Juice - Determination of Soluble Solids Content - Pyknometric Method First Edition Fruit and Vegetable Products - Determination of Soluble Solids Content - Refractometric Method Second Edition Surface Active Agents - Preparation of Water with Known Calcium Hardness Third Edition

ISO ISO

2176 2177

ISO ISO

2178 2179

ISO

2186

Petroleum Products - Lubricating Grease - Determination of Dropping Point Second Edition; Technical Corrigendum 1:06-15-2001 Metallic Coatings - Measurement of Coating Thickness - Coulometric Method by Anodic Dissolution Third Edition Non-Magnetic Coatings on Magnetic Substrates - Measurement of Coating Thickness - Magnetic Method Second Edition; CEN EN ISO 2178: 1995; PNS 678: 1990 Electroplated Coatings of Tin-Nickel Alloy - Specification and Test Methods Second Edition Fluid flow in closed conduits ù Connections for pressure signal transmissions between primary and secondary elements Second Edition

ISO ISO ISO ISO

2187 2189 2190 2191

ISO ISO

2194 2197

ISO ISO ISO

2199 2203 2205

Spinning Preparatory Machinery, Spinning and Doubling (Twisting) Machinery - List of Equivalent Terms Second Edition Expanded Pure Agglomerated Cork - Determination of Bulk Density Second Edition Granulated Cork - Determination of Moisture Content Third Edition Cork - Expanded Pure Agglomerated - Deformation under Constant Pressure First Edition Industrial Screens - Woven Wire Cloth, Perforated Plate and Electroformed Sheet - Designation and Nominal Sizes of Openings Second Edition Sodium Hydrogen Carbonate for Industrial Use - List of Methods of Test and Preparation of the Test Sample First Edition Sodium Hydrogen Carbonate for Industrial Use - Determination of Sodium Hydrogen Carbonate Content - Titrimetric Method First Edition Technical Drawings - Conventional Representation of Gears First Edition Textile Machinery and Accessories - Drafting Arrangements for Spinning Machines - Terminology First Edition

ISO ISO ISO ISO ISO ISO ISO

2206 2207 2209 2211 2219 2227 2230

Packaging - Complete, Filled Transport Packages - Identification of Parts When Testing Second Edition; CEN EN 22206: 1992 Petroleum Waxes - Determination of Congealing Point First Edition Liquid Halogenated Hydrocarbons for Industrial Use - Sampling First Edition Liquid Chemical Products - Measurement of Colour in Hazen Units (Platinum-Cobalt Scale) First Edition Expanded Pure Agglomerated Cork for Thermal Insulation - Characteristics, Sampling and Packaging Second Edition Formaldehyde Solutions for Industrial Use - Determination of Formaldehyde Content First Edition Rubber Products - Guidelines for Storage Second Edition

ISO

2231

ISO ISO ISO

2232 2233 2234

Rubber- or Plastics-Coated Fabrics - Standard Atmospheres for Conditioning and Testing Second Edition; CEN EN ISO 2231: 1995 Round Drawn Wire for General Purpose Non-Alloy Steel Wire Ropes and for Large Diameter Steel Wire Ropes - Specifications Second Edition Packaging - Complete, Filled Transport Packages and Unit Loads - Conditioning for Testing Fourth Edition Packaging - Complete, Filled Transport Packages and Unit Loads - Stacking Tests Using a Static Load Third Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

2236 2238 2240 2244 2245 2247 2248 2250 2253 2254

Assembly Tools for Screws and Nuts - Forged and Tubular Socket Wrenches - Maximum Outside Head Dimensions Third Edition Machine Bridge Reamers First Edition Photography Colour reversal camera films Determination of ISO speed Fourth Edition Packaging - Complete, Filled Transport Packages and Unit Loads - Horizontal Impact Tests Third Edition Shaped insulating refractory products Classification Third Edition Packaging - Complete, Filled Transport Packages and Unit Loads - Vibration Tests at Fixed Low Frequency Third Edition Packaging - Complete, Filled Transport Packages - Vertical Impact Test by Dropping Second Edition; CEN EN 22248: 1992 Finishing Reamers for Morse and Metric Tapers, with Parallel Shanks and Morse Taper Shanks First Edition Curry Powder - Specification Third Edition Cloves, whole and ground (powdered) Specification Second Edition

ISO ISO

2255 2256

ISO ISO ISO ISO

2257 2258 2261 2262

ISO

2267

ISO

2268

Coriander, (Coriandrum Sativum L.), Whole or Ground (Powdered) - Specification Second Edition Dried Mint (Spearmint) (Mentha spicata Linnaeus Syn. Mentha viridis Linnaeus) - Specification First Edition Office Machines and Printing Machines Used for Information Processing - Widths of Fabric Printing Ribbons on Spools Second Edition; Corrected and Reprinted - 1981 Printing Ribbons - Minimum Markings to Appear on Containers Second Edition Reciprocating Internal Combustion Engines - Hand-Operated Control Devices - Standard Direction of Motion Second Edition General Purpose Thimbles for Use with Steel Wire Ropes - Specification Second Edition Surface Active Agents - Evaluation of Certain Effects of Laundering - Methods of Preparation and Use of Unsoiled Cotton Control Cloth Third Edition Surface Active Agents (Non-Ionic) - Determination of Polyethylene Glycols and Non-Ionic Active Matter (Adducts) - Weibull Method First Edition

ISO

2269

Shipbuilding - Class A Magnetic Compasses, Azimuth Reading Devices and Binnacles - Tests and Certification Second Edition

ISO

2270

ISO

2271

ISO ISO ISO ISO ISO

2272 2277 2281 2283 2284

ISO

2285

ISO

2286-1

ISO

2286-2

ISO ISO ISO ISO ISO ISO

2286-3 2291 2292 2294 2295 2296

Non-Ionic Surface Active Agents - Polyethoxylated Derivatives - Iodometric Determination of Oxyethylene Groups Second Edition Surface Active Agents - Detergents - Determination of Anionic-Active Matter by Manual or Mechanical Direct Two-Phase Titration Procedure Second Edition Surface Active Agents - Soaps - Determination of Low Contents of Free Glycerol by Molecular Absorption Spectrometry Second Edition Static Invertors for Aircraft First Edition; Erratum-1973 Horology - Water-Resistant Watches Third Edition Long Shank Machine Taps with Nominal Diameters from M3 to M24 and 1/8 to 1 in - Reduced Shank Taps Second Edition Hand Taps for Parallel and Taper Pipe Threads - General Dimensions and Marking Third Edition Rubber, vulcanized or thermoplastic ù Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load Sixth Edition Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 1: Methods for Determination of Length, Width and Net Mass First Edition Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 2: Methods for Determination of Total Mass per Unit Area, Mass per Unit Area of Coating and Mass per Unit Area of Substrate First Edition Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 3: Methods for Determination of Thickness First Edition Cocoa Beans - Determination of Moisture Content (Routine Method) Second Edition Cocoa Beans - Sampling First Edition Meat and Meat Products - Determination of Total Phosphorus Content (Reference Method) First Edition Avocados - Guide for Storage and Transport First Edition Metal Slitting Saws with Fine and Coarse Teeth - Metric Series First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

2297 2299 2300 2301 2302 2303 2306 2307 2308 2309

ISO ISO

2313 2314

ISO

2315

ISO ISO ISO ISO ISO ISO ISO ISO ISO

2320 2321 2322 2325 2326 2327 2328 2330 2331

ISO ISO

2332 2336-1

ISO ISO ISO ISO ISO ISO ISO

2336-2 2338 2339 2340 2341 2342 2344

Chemical Analysis of Aluminium and Its Alloys - Complexometric Determination of Magnesium First Edition Sawn Timber of Broadleaved Species - Defects - Classification First Edition Sawn Timber of Broadleaved Species - Defects - Terms and Definitions First Edition Sawn Timber of Broadleaved Species - Defects - Measurement First Edition Isobutene-isoprene rubber (IIR) Evaluation procedures Fifth Edition Isoprene Rubber (IR) - Non-Oil-Extended, Solution-Polymerized Types - Evaluation Procedure Fourth Edition Drills for Use Prior to Tapping Screw Threads First Edition Fibre ropes Determination of certain physical and mechanical properties Third edition Hooks for Lifting Freight Containers of up to 30 Tonnes Capacity - Basic Requirements First Edition Coke - Sampling Second Edition Textile Fabrics - Determination of the Recovery from Creasing of a Horizontally Folded Specimen by Measuring the Angle of Recovery First Edition Gas Turbines - Acceptance Tests Second Edition; Corrigendum 1-1997; Amendment 1-1997 Aircraft - Two- and Four-Pole Sealed Electromagnetic Relays, 2 A and 3 A - Clearance and Fixing Dimensions Second Edition Prevailing Torque Type Steel Hexagon Nuts - Mechanical and Performance Properties Third Edition; Technical Corrigendum 1: 09/01/2006 Rubber threads Methods of test Third Edition Styrene-Butadiene Rubber (SBR) - Emulsion- and Solution-Polymerized Types - Evaluation Procedures Fourth Edition Coke - Size Analysis (Nominal Top Size 20 mm or Less) Third Edition Continuous Mechanical Handling Equipment for Loose Bulk Materials - Aeroslides First Edition Pneumatic Handling Appliances for Loose Bulk Materials - Piping First Edition Fork-Lift Trucks - Hook-On Type Fork Arms and Fork Arm Carriages - Mounting Dimensions Third Edition Fork-Lift Trucks - Fork Arms - Technical Characteristics and Testing Third Edition Fork Lift Trucks - Hook-On Type Fork Arms - Vocabulary First Edition Agricultural Tractors and Machinery - Connection of Implements Via Three-Point Linkage - Clearance Zone Around Implement Second Edition Hacksaw Blades - Part 1: Dimensions for Hand Blades First Edition; Replaces ISO 2336 Hacksaw blades Part 2: Dimensions for machine blades Lames de scies droites Ó mÚtaux Partie 2: Dimensions des lames Ó machine Second Edition Parallel Pins, of Unhardened Steel and Austenitic Stainless Steel Second Edition Taper Pins, Unhardened Second Edition Clevis Pins without Head Second Edition Clevis Pins with Head Second Edition Slotted headless screws with shank Second Edition Road Vehicles - M14 X 1,25 Spark-Plugs with Conical Seating and Their Cylinder Head Housings Seventh Edition

ISO

2345

ISO ISO

2346 2347

ISO

2351-1

ISO

2351-2

ISO

2351-3

ISO ISO ISO

2353 2354 2355

ISO

2360

ISO

2361

ISO ISO ISO ISO ISO

2366 2367 2370 2374 2375

ISO ISO ISO ISO

2376 2377 2378 2379

ISO

2380-1

ISO ISO ISO

2380-2 2382-1 2382-3

Road Vehicles - M18 X 1,5 Spark-Plugs with Conical Seating and Their Cylinder Head Housing Fifth Edition Road Vehicles - M14 x 1,25 Compact Spark-Plugs with Flat Seating and 19mm Hexagon and Their Cylinder Head Housing Fifth Edition Road Vehicles - M14 X 1,25 Compact Spark-Plugs with Conical Seating and Their Cylinder Head Housing Fifth Edition Assembly tools for screws and nuts ù Machine-operated screwdriver bits ù Part 1: Screwdriver bits for slotted head screws Second Edition Assembly Tools for Screws and Nuts - Machine-Operated Screwdriver Bits - Part 2: Screwdriver Bits for Cross-Recessed Head Screws First Edition Assembly Tools for Screws and Nuts - Machine-Operated Screwdriver Bits - Part 3: Screwdriver Bits for Hexagon Socket Screws First Edition; Replaces ISO 3109 Magnesium and Its Alloys - Determination of Manganese in Magnesium Alloys Containing Zirconium, Rare Earths, Thorium and Silver - Periodate Photometric Method First Edition Magnesium Alloys - Determination of Insoluble Zirconium - Alizarin Sulphonate Photometric Method Second Edition Chemical Analysis of Magnesium and Its Alloys - Determination of Rare Earths - Gravimetric Method First Edition Non-conductive coatings on non-magnetic electrically conductive basis materials Measurement of coating thickness Amplitudesensitive eddy current method Third Edition Electrodeposited Nickel Coatings on Magnetic and Non-Magnetic Substrates - Measurement of Coating Thickness - Magnetic Method Second Edition; PNS 671: 1990 Cryolite, Natural and Artificial - Determination of Sodium Content - Flame Emission and Atomic Absorption Spectrophotometric Methods First Edition Cryolite (Natural and Artificial) - Determination of Aluminium Content - 8-Hydroxyquinoline Gravimetric Method First Edition Textiles - Determination of Fineness of Flax Fibres - Permeametric Methods Second Edition Lifting Appliances - Range of Maximum Capacities for Basic Models First Edition Information Technology - Procedure for Registration of Escape Sequences and Coded Character Sets First Edition Anodization (Anodic Oxidation) of Aluminium and Its Alloys - Insulation Check by Measurement of Breakdown Potential First Edition Magnesium Alloy Sand Castings - Reference Test Bar First Edition Aluminium Alloy Chill Castings - Reference Test Bar First Edition Aluminium Alloy Sand Castings - Reference Test Bar First Edition Assembly tools for screws and nuts Screwdrivers for slotted-head screws Part 1: Tips for hand- and machine-operated screwdrivers Third Edition Assembly tools for screws and nuts Screwdrivers for slotted-head screws Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers Third Edition Information Technology - Vocabulary - Part 1: Fundamental Terms Third Edition Information Processing Systems - Vocabulary - Part 03: Equipment Technology Second Edition

ISO

2382-4

ISO ISO

2382-5 2382-6

ISO

2382-7

ISO ISO ISO ISO ISO ISO

2382-8 2382-9 2382-12 2382-13 2382-15 2382-16

ISO

2382-17

ISO ISO ISO

2382-18 2382-19 2382-20

ISO ISO ISO ISO ISO ISO ISO ISO

2382-21 2382-22 2382-23 2382-24 2382-25 2382-26 2382-27 2382-28

ISO ISO

2382-29 2382-31

ISO

2382-32

ISO

2382-34

Information Technology - Vocabulary - Part 4: Organization of Data Technologies De L'Information - Vocabulaire - Partie 4: Organisation Des Donnees First Edition Information Technology - Vocabulary - Part 5: Representation of Data Technologies De L'Information - Vocabulaire - Partie 5: Representation Des Donnees First Edition Information Processing Systems - Vocabulary - Part 06: Preparation and Handling of Data Second Edition Information Technology - Vocabulary - Part 07: Computer Programming Technologies De L'Information - Vocabulaire - Partie 7: Programmation Des Ordinateurs Third Edition Information Technology - Vocabulary - Part 8: Security Technologies DeL'Information - Vocabularie - Partie 8: Securite Second Edition Information Technology - Vocabulary - Part 9: Data Communication Second Edition Information Processing Systems - Vocabulary - Part 12: Peripheral Equipment Second Edition Information Technology - Vocabulary - Part 13: Computer Graphics Second Edition Information Technology - Vocabulary - Part 15: Programming Languages First Edition Information Technology - Vocabulary - Part 16: Information Theory Second Edition Information Technology - Vocabulary - Part 17: Databases Technologies De I'Information - Vocabulaire - Partie 17: Bases De Donnees Second Edition Information Technology - Vocabulary - Part 18: Distributed Data Processing Technologies De L'Information - Vocabulaire - Partie 18: Informatique Repartie First Edition Information Processing Systems - Vocabulary - Part 19: Analog Computing Second Edition Information Technology - Vocabulary - Part 20: System Development First Edition Data Processing - Vocabulary - Part 21: Interfaces between Process Computer Systems and Technical Processes First Edition Information Processing Systems - Vocabulary - Part 22: Calculators First Edition Information Technology - Vocabulary - Part 23: Text Processing First Edition Information Technology - Vocabulary - Part 24: Computer-Integrated Manufacturing First Edition Information Technology - Vocabulary - Part 25: Local Area Networks First Edition Information Technology - Vocabulary - Part 26: Open Systems Interconnection First Edition Information Technology - Vocabulary - Part 27: Office Automation First Edition Information Technology - Vocabulary - Part 28: Artificial Intelligence - Basic Concepts and Expert Systems First Edition Information Technology - Vocabulary - Part 29: Artificial Intelligence - Speech Recognition and Synthesis Technologies De L'Information - Vocabulaire - Partie 29: Intelligence Artificielle - Reconnaissance Et Synthese De La Parole First Edition Information Technology - Vocabulary - Part 31: Artificial Intelligence - Machine Learning First Edition Information technology Vocabulary Part 32: Electronic Mail Technologies de l'information Vocabulaire Partie 32: Courrier Úlectronique First Edition Information Technology - Vocabulary - Part 34: Artificial Intelligence - Neural Networks Technologies De L'Information - Vocabulaire Partie 34: Intelligence Artificielle - Reseaux Neuronaux First Edition

ISO

2382-2

ISO

2382-10

ISO ISO

2382-14 2384

ISO

2385

ISO ISO ISO ISO ISO ISO

2386 2393 2394 2395 2398 2400

Data Processing - Vocabulary - Section 02: Arithmetic and Logic Operations Traitement De L'Information - Vocabulaire - Chapitre 02: Operations Arithmetiques Et Logiques First Edition Data Processing - Vocabulary - Section 10: Operating Techniques and Facilities Traitement De L'Information - Vocabulaire - Chapitre 10: Techniques Et Moyens D'Exploitation First Edition Information Technology - Vocabulary - Part 14: Reliability, Maintainability and Availability Technologies De L'Information - Vocabulaire - Partie 14: Fiabilite, Maintenabilite Et Disponibilite Second Edition Documentation - Presentation of Translations First Edition Corkwood in Planks, Virgin Cork, Cleanings, Cork Pieces, Corkwood Refuse and Corkwaste - Sampling to Determine Moisture Content Second Edition Corkwood in Planks, Virgin Cork, Ramassage, Gleanings, Corkwood Refuse and Corkwaste - Determination of Moisture Content Third Edition Rubber Test Mixes - Preparation, Mixing and Vulcanization - Equipment and Procedures Second Edition General Principles on Reliability for Structures Third Edition Test Sieves and Test Sieving - Vocabulary Second Edition Rubber hoses, textile-reinforced, for compressed air Specification Fifth Edition Welds in Steel - Reference Block for the Calibration of Equipment for Ultrasonic Examination First Edition

ISO ISO ISO

2401 2402 2403

Covered Electrodes - Determination of the Efficiency, Metal Recovery and Deposition Coefficient First Edition; CEN EN 22401: 1994 Shell Reamers with Taper Bore (Taper Bore 1 : 30 (Included)) with Slot Drive and Arbors for Shell Reamers First Edition Textiles - Cotton Fibres - Determination of Micronaire Value First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

2404 2406 2407 2408 2409 2410 2411 2412 2415 2416 2417

Cinematography - Six-Track Magnetic Sound Records on 70 mm Striped Release Prints - Locations and Dimensions Second Edition Continuous Mechanical Handling Equipment - Mobile and Portable Conveyors - Constructional Specifications First Edition Tests Conditions for Internal Cylindrical Grinding Machines with Horizontal Spindle - Testing of Accuracy Third Edition Steel wire ropes for general purposes Minimum requirements Third Edition Paints and Varnishes - Cross-Cut Test Third Edition Household Refrigerators - Methods of Test for the Information of the Consumer First Edition Rubber- or Plastics-Coated Fabrics - Determination of Coating Adhesion Third Edition Shipbuilding - Colours of Indicator Lights Second Edition Forged shackles for general lifting purposes Dee shackles and bow shackles Third Edition Passenger Cars - Mass Distribution Third Edition Leather Physical and mechanical tests Determination of the static absorption of water Second Edition; IULTCS/IUP 7

ISO ISO ISO

2418 2419 2420

Leather Chemical, physical and mechanical and fastness tests Sampling location Second Edition; IULTCS/IUP 2 and IUC 2 Leather Physical and mechanical tests Sample preparation and conditioning Third Edition; IULTCS/IUP 1 and IUP 3 Leather Physical and mechanical tests Determination of apparent density Second Edition; IULTCS/IUP 5

ISO ISO ISO ISO ISO ISO ISO

2421 2423 2424 2425 2426-1 2426-2 2426-3

ISO

2431

ISO ISO ISO ISO

2433 2434 2435 2436

ISO ISO ISO ISO ISO ISO ISO

2439 2440 2444 2445 2446 2447 2448

ISO ISO ISO

2449 2450 2451

ISO ISO ISO ISO

2453 2454 2456 2457

Coated Abrasives - Cylindrical Sleeves Second Edition Acceptance Conditions for Radial Drilling Machines with the Arm Adjustable in Height - Testing of Accuracy Second Edition Textile floor coverings ù Vocabulary RevÛtements de sol textiles ù Vocabulaire Fourth Edition Measurement of Liquid Flow in Open Channels Under Tidal Conditions Second Edition; AMENDMENT 1: 12/01/2003 Plywood - Classification by Surface Appearance - Part 1: General First Edition; Supersedes ISO 2426: 1974 Plywood - Classification by Surface Appearance - Part 2: Hardwood First Edition Plywood - Classification by Surface Appearance - Part 3: Softwood First Edition; Supersedes ISO 2426: 1974 Paints and Varnishes - Determination of Flow Time by Use of Flow Cups Fourth Edition; Technical Corrigendum 1: 06-15-1994; Technical Corrigendum 2: 04-01-1999 Machine Tools - Test Conditions for External Cylindrical and Universal Grinding Machines with a Movable Table - Testing of the Accuracy Third Edition Compressed Non-Breathing Air for Use in Aircraft First Edition Nitrogen for Use in Aircraft First Edition Heat-Resisting Equipment Wires for Aircraft - Methods of Test First Edition Flexible Cellular Polymeric Materials - Determination of Hardness (Indentation Technique) Third Edition; Technical Corrigendum 11998 Flexible and Rigid Cellular Polymeric Materials - Accelerated Ageing Tests Third Edition Joints in Building - Vocabulary Second Edition Joints in Building - Fundamental Principles for Design First Edition Milk - Determination of Fat Content (Routine Method) First Edition Fruit and Vegetable Products - Determination of Tin Content Second Edition Fruit and Vegetable Products - Determination of Ethanol Content Second Edition Milk and Liquid Milk Products - Density Hydrometers for Use in Products with a Surface Tension of Approximately 45 mN/m First Edition Cream - Determination of Fat Content - Gravimetric Method (Reference Method) Third Edition Cocoa Beans - Specification First Edition Rubber, Raw Styrene-Butadiene, Emulsion-Polymerized - Determination of Bound Styrene Content - Refractive Index Method Second Edition; Corrigendum 1:08/15/2003 Rubber Products - Determination of Zinc Content - EDTA Titrimetric Method Third Edition Surface Active Agents - Water Used as a Solvent for Tests - Specification and Test Methods First Edition Solid Wood Parquet - Classification of Beech Strips Second Edition

ISO ISO ISO ISO

2460 2461 2462 2463

Sodium Hydrogen Carbonate for Industrial Use - Determination of Iron Content - 1,10-Penanthroline Photometric Method First Edition Sodium Chlorate for Industrial Use - Determination of Matter Insoluble in Water First Edition Sodium Chlorate for Industrial Use - Determination of Moisture Content - Gravimetric Method First Edition Sodium Chlorate for Industrial Use - Determination of Chloride Content - Mercurimetric Method First Edition

ISO

2466

ISO ISO ISO ISO

2467 2469 2470 2471

ISO ISO ISO ISO

2475 2476 2477 2478

ISO ISO ISO

2479 2480 2481

ISO ISO ISO ISO ISO ISO ISO

2482 2483 2490 2491 2492 2493 2495

ISO

2503

ISO

2504

Potassium Hydroxide for Industrial Use - Sampling - Test Sample - Preparation of the Main Solution for Carrying out Certain Determinations First Edition Cinematography Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints Positions and dimensions Third Edition Paper, board and pulps ù Measurement of diffuse radiance factor Fourth Edition Paper, Board and Pulps - Measurement of Diffuse Blue Reflectance Factor (ISO Brightness) Third Editon Paper and Board - Determination of Opacity (Paper Backing) - Diffuse Reflectance Method Third Edition Chloroprene rubber (CR) - Generalpurpose types - Evaluation procedure Fourth Edition; Technical Corrigendum 1: 06/01/2001; Amendment 1: 10/15/2005 Rubber, Butadiene (BR) - Solution-Polymerized Types - Evaluation Procedures Fourth Edition Shaped insulating refractory products - Determination of permanent change in dimensions on heating Third Edition Dense Shaped Refractory Products - Determination of Permanent Change in Dimensions on Heating Second Edition Sodium Chloride for Industrial Use - Determination of Matter Insoluble in Water or in Acid and Preparation of Principal Solutions for Other Determinations First Edition Sodium Chloride for Industrial Use - Determination of Sulphate Content - Barium Sulphate Gravimetric Method First Edition Sodium Chloride for Industrial Use - Determination of Halogens, Expressed as Chlorine - Mercurimetric Method First Edition Sodium Chloride for Industrial Use - Determination of Calcium and Magnesium Contents - EDTA Complexometric Methods First Edition Sodium Chloride for Industrial Use - Determination of the Loss of Mass at 110 Degrees Celsius First Edition Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module ù Nominal dimensions Third Edition Thin Parallel Keys and Their Corresponding Keyways (Dimensions in Millimetres) First Edition Thin Taper Keys with or without Gib Head and Their Corresponding Keyways (Dimensions in Millimetres) First Edition Paper and Board - Determination of Resistance to Bending Second Edition Iron Blue Pigments - Specifications and Methods of Test Second Edition Gas Welding Equipment - Pressure Regulators for Gas Cylinders Used in Welding, Cutting and Allied Processes up to 300 bar Third Edition Radiography of Welds and Viewing Conditions for Films - Utilization of Recommended Patterns of Image Quality Indicators (I.Q.I.) First Edition

ISO

2505

Thermoplastics pipes - Longitudinal reversion - Test method and parameters Second edition; Replaces ISO 2505-1 and 2505-2

ISO

2507-1

ISO

2507-2

Thermoplastics Pipes and Fittings - Vicat Softening Temperature - Part 1: General Test Method First Edition; Replaces ISO 2507 Thermoplastics Pipes and Fittings - Vicat Softening Temperature - Part 2: Test Conditions for Unplasticized Poly(Vinyl Chloride) (PVCU) or Chlorinated Poly(Vinyl Chloride) (PVC-C) Pipes and Fittings and for High Impact Resistance Poly(Vinyl Chloride) (PVC-HI) Pipes First Edition; Replaces ISO 2507

ISO ISO ISO ISO ISO ISO

2507-3 2509 2510 2528 2531 2532

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

2533 2534 2535 2536 2537 2538 2540 2541 2543 2544 2549 2550

ISO ISO ISO

2551 2553 2554

ISO

2555

ISO

2556

ISO ISO

2558 2559

ISO

2560

ISO

2561

Thermoplastics Pipes and Fittings - Vicat Softening Temperature - Part 3: Test Conditions for Acrylonitrile/ Butadiene/Styrene (ABS) and Acrylonitrile/ Styrene/Acrylic Ester (ASA) Pipes and Fittings First Edition Sound-Absorbing Expanded Pure Agglomerated Cork in Tiles Second Edition Sound-Reducing Composition Cork in Tiles Second Edition Sheet Materials - Determination of Water Vapour Transmission Rate - Gravimetric (Dish) Method Second Edition Ductile Iron Pipes, Fittings, Accessories and Their Joints for Water or Gas Applications Fifth Edition Steel Wire Ropes - Vocabulary First Edition Standard Atmosphere (Identical with the ICAO and WMO Standard Atmospheres from - 2 to 32 km) Atmosphere Type (Identique Aux Atmospheres Standard De L'OACI Et De L'OMM Entre - 2 Et 32 km) First Edition; Erratum-1977; Amendment 1-1985; Amendment 21997 Road Vehicles - Engine Test Code - Gross Power Second Edition; This Standard is Consistent with ISO 1585: 1992 Plastics - Unsaturated-Polyester Resins - Measurement of Gel Time at Ambient Temperature Third Edition Unplasticized Polyvinyl Chloride (PVC) Pressure Pipes and Fittings, Metric Series - Dimensions of Flanges First Edition Hydrometry ù Rotating-element currentmeters Fouth Edition Geometrical Product Specifications (GPS) - Series of Angles and Slopes on Prisms Second Edition Centre Drills for Centre Holes with Protecting Chamfer - Type B First Edition Centre Drills for Centre Holes with Radius Form - Type R First Edition Copper and Copper Alloys - Determination of Manganese - Spectrophotometric Method First Edition Textile Machinery and Accessories - Warping Machinery - Preparation of Warp for Weaving - Vocabulary First Edition Hand-Knotted Carpets - Determination of Tuft Leg Length Above the Woven Ground First Edition; Corrigendum 1-1990 Hand-Made Carpets - Determination of Types of Knots First Edition Machine-Made Textile Floor Coverings - Determination of Dimensional Changes Due to the Effects of Varied Water and Heat Conditions Second Edition Welded, Brazed and Soldered Joints - Symbolic Representation on Drawings Third Edition; Includes Draft Addendum 1 Plastics - Unsaturated Polyester Resins - Determination of Hydroxyl Value Second Edition Plastics - Resins in the Liquid State or as Emulsions or Dispersions - Determination of Apparent Viscosity by the Brookfield Test Method Second Edition; Corrected and Reprinted- 1990 Plastics - Determination of the Gas Transmission Rate of Films and Thin Sheets Under Atmospheric Pressure - Manometric Method First Edition Textile Glass Chopped-Strand Mats for Reinforcement of Plastics - Determination of Time of Dissolution of the Binder in Styrene First Edition Textile Glass - Mats (Made from Chopped or Continuous Strands) - Designation and Basis for Specifications Fourth Edition Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of Non-Alloy and Fine Grain Steels - Classification Second Edition Plastics Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

2562 2563 2566-1 2566-2 2568 2569 2572 2574 2575 AMD 2 2575 AMD 1 2575

ISO ISO ISO

2576 2577 2578

ISO

2580-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

2580-2 2582 2584 2585 2586 2587 2588 2589 2590 2591-1 2592

ISO ISO

2593 2594

ISO ISO ISO

2596 2597-1 2598-1

Modular Units for Machine Tool Construction - Slide Units First Edition; Amendment 1-1982 Aircraft Ducting and Piping - Profile Dimensions for Flanges of V-Band Couplings First Edition Steel - Conversion of Elongation Values - Part 1: Carbon and Low Alloy Steels Second Edition Steel - Conversion of Elongation Values - Part 2: Austenitic Steels First Edition Hand- and Machine-Operated Circular Screwing Dies and Hand-Operated Die Stocks Second Edition Cork Stoppers - Vocabulary Third Edition Textile Machinery and Accessories - Card Gauges Second Edition Aircraft - Electrical Cables - Identification Marking Second Edition Road vehicles ù Symbols for controls, indicators and tell-tales AMENDMENT 2 Seventh Edition Road vehicles ù Symbols for controls, indicators and tell-tales AMENDMENT 1 Seventh Edition Road vehicles ù Symbols for controls, indicators and tell-tales Seventh Edition Chemical Analysis of Zinc Alloys - Polarographic Determination of Lead and Cadmium in Zinc Alloys Containing Copper First Edition Plastics - Thermosetting Moulding Materials - Determination of Shrinkage Second Edition Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat Second Edition Plastics - Acrylonitrile-Butadiene-Styrene (ABS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Fifth Edition Plastics - Acrylonitrile/ Butadiene/Styrene (ABS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties Third Edition Cork and Cork Products - Determination of Thermal Conductivity - Hot Plate Method First Edition Cylindrical Cutters with Plain Bore and Key Drive - Metric Series First Edition Slotting Cutters with Plain Bore and Key Drive - Metric Series First Edition Shell End Mills with Plain Bore and Tenon Drive - Metric Series Second Edition Side and Face Milling Cutters with Plain Bore and Key Drive - Metric Series First Edition Leather - Sampling - Number of Items for a Gross Sample Second Edition Leather Physical and mechanical tests Determination of thickness Second Edition; IULTCS/IUP 4 General Method for the Determination of Arsenic - Silver Diethyldithiocarbamate Photometric Method First Edition Test Sieving - Part 1: Methods Using Test Sieves of Woven Wire Cloth and Perforated Metal Plate First Edition Determination of Flash and Fire Points - Cleveland Open Cup Method Second Edition Information Technology - Telecommunications and Information Exchange between Systems - 34-Pole DTE/DCE Interface Connector Mateability Dimensions and Contact Number Assignments Fourth Edition Building Drawings - Projection Methods First Edition; Erratum-1972 Iron ores Determination of hygroscopic moisture in analytical samples Gravimetric, Karl Fischer and mass-loss methods Fifth Edition Iron ores Determination of total iron content Part 1: Titrimetric method after tin(II) chloride reduction Second Edition Iron Ores - Determination of Silicon Content - Part 1: Gravimetric Methods First Edition

Iron Ores - Determination of Silicon Content - Part 2: Reduced Molybdosilicate Spectrophotometric Method First Edition; Replaces ISO 4686 Iron Ores - Determination of Phosphorus Content - Titrimetric Method Third Edition Statistical Interpretation of Test Results - Estimation of the Mean - Confidence Interval Second Edition Booths for Simultaneous Interpretation - General Characteristics and Equipment Third Edition Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 2: Unalloyed and Alloyed Steels with Specified Elevated Temperature Properties First Edition; Replaces 2604-2 Along with 9329 Parts 1, 3 and 4

ISO ISO ISO ISO

2598-2 2599 2602 2603

ISO

9329-2

ISO ISO ISO

2605-3 2624 2626

ISO

2631-1

ISO

2631-2

ISO

2631-4

ISO ISO

2631-5 2633

ISO ISO

2635 2639

Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body Vibration - Part 4: Guidelines for the Evaluation of the Effects of Vibration and Rotational Motion on Passenger and Crew Comfort in Fixed-Guideway Transport Systems First Edition Mechanical vibration and shock Evaluation of human exposure to whole-body vibration Part 5: Method for evaluation of vibration containing multiple shocks First Edition Determination of Imposed Floor Loads in Production Buildings and Warehouses First Edition Aircraft - Conductors for General Purpose Aircraft Electrical Cables and Aerospace Applications - Dimensions and Characteristics Second Edition Steel - Determination and Verification of the Depth of Carburized and Hardened Cases Third Edition

ISO ISO ISO ISO ISO

2646 2647 2648 2669 2671

Wool - Measurement of the Length of Fibres Processed on the Worsted System, Using a Fibre Diagram Machine First Edition Wool - Determination of Percentage of Medullated Fibres by the Projection Microscope First Edition Wool - Determination of Fibre Length Distribution Parameters - Electronic Method First Edition Environmental Tests for Aircraft Equipment - Steady-State Acceleration Second Edition Environmental Tests for Aircraft Equipment - Part 3.4: Acoustic Vibration First Edition

ISO

2678

Environmental Tests for Aircraft Equipment - Insulation Resistance and High Voltage Tests for Electrical Equipment Second Edition

ISO

2685

Aircraft - Environmental Test Procedure for Airborne Equipment - Resistance to Fire in Designated Fire Zones Second Edition

Steel Products for Pressure Purposes - Derivation and Verification of Elevated Temperature Properties - Part 3: An Alternative Procedure for Deriving the Elevated Temperature Yield or Proof Stress Properties When Data Are Limited First Edition Copper and Copper Alloys - Estimation of Average Grain Size Second Edition Copper - Hydrogen Embrittlement Test First Edition Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body Vibration - Part 1: General Requirements Second Edition; Replaces ISO 2631-3:1985; Corrected and Reprinted 07/15/1997; Supersedes NZS ISO 2631.1: 1985 and NZS ISO 2631.3: 1985 Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body Vibration - Part 2: Vibration in Buildings (1 Hz to 80 Hz) Second Edition; Supersedes NZS ISO 2631.2: 1989

ISO

2692

ISO

2695

ISO ISO ISO ISO ISO ISO ISO ISO ISO

2696 2697 2698 2699 2701 2702 2704 2705 2709

ISO

2710-1

ISO

2710-2

ISO ISO ISO ISO

2714 2715 2718 2719

ISO ISO ISO ISO ISO ISO ISO

2720 2721 2722 2723 2724 2725-1 2725-2

ISO ISO ISO

2725-3 2726 2727

Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) Second Edition Fibre Building Boards - Hard and Medium Boards for General Purposes - Quality Specifications - Appearance, Shape and Dimensional Tolerances First Edition Fibre Building Boards - Hard and Medium Boards for General Purposes - Quality Specifications - Water Absorption and Swelling in Thickness First Edition Diesel Engines - Fuel Nozzles - SizeS" Second Edition" Diesel Engines - Clamp-Mounted Fuel Injectors, Types 7 and 28 Second Edition Diesel Engines - Flange-Mounted Fuel Injectors, SizeS" - Types 2 Drawn Wire for General Purpose Non-Alloy Steel Wire Ropes - Terms of Acceptance First Edition Heat-Treated Steel Tapping Screws - Mechanical Properties Second Edition; CEN EN ISO 2702: 1994; AS/NZS 4412: 1996 Road Vehicles - M10 x 1 Spark-Plugs with Flat Seating and Their Cylinder Head Housing Fifth Edition Road Vehicles - M12 X 1,25 Spark-Plugs with Flat Seating and Their Cylinder Head Housing Sixth Edition Information and Documentation - Format for Information Exchange Third Edition Reciprocating Internal Combustion Engines - Vocabulary - Part 1: Terms for Engine Design and Operation Moteurs Alternatifs A Combustion Interne-Vocabulaire - Partie 1: Termes Relatifs A La Conception Et Au Fonctionnement Du Moteur First Edition; This Standard Together with 2710-2 Cancels and Replaces ISO 2710: 1978 Reciprocating Internal Combustion Engines - Vocabulary - Part 2: Terms for Engine Maintenance Moteurs Alternatifs A Combustion Interne - Vocabulaire - Partie 2: Termes Relatifs A La Maintenance Du Moteur First Edition Liquid Hydrocarbons - Volumetric Measurement by Displacement Meter Systems Other Than Dispensing Pumps First Edition; (Erratum-1982) Liquid Hydrocarbons - Volumetric Measurement by Turbine Meter Systems First Edition Standard Layout for a Method of Chemical Analysis by Gas Chromatography First Edition Determination of Flash Point - Pensky-Martens Closed Cup Method Third Edition Photography - General Purpose Photographic Exposure Meters (Photoelectric Type) - Guide to Product Specification First Edition Photography - Cameras - Automatic Controls of Exposure First Edition; (ANSI PH3.301-1990) Vitreous and Porcelain Enamels - Determination of Resistance to Citric Acid at Room Temperature Second Edition Vitreous and Porcelain Enamels for Sheet Steel - Production of Specimens for Testing Second Edition Vitreous and Porcelain Enamels for Cast Iron-Production of Specimens for Testing First Edition Assembly tools for screws and nuts ù Square drive sockets ù Part 1: Hand-operated sockets Second Edition Assembly tools for screws and nuts ù Square drive sockets ù Part 2: Machine-operated sockets (ôimpactö) Second Edition Assembly Tools for Screws and Nuts - Square Drive Sockets - Part 3: Machine-Operated Sockets (Non-Impact") - Dimensions First Edition" Woodworking Tools - Metal-Bodied Bench Planes, Plane Cutters and Cap Irons Second Edition Modular Units for Machine Tool Construction - Headstocks First Edition; (NZS 5216: 1974)

ISO ISO ISO ISO

2729 2730 2733 2734

ISO

2736-2

ISO ISO ISO ISO ISO ISO ISO ISO

2738 2739 2740 2741 2742 2743 2744 2745

ISO

2746

ISO ISO ISO ISO ISO

2747 2748 2758 2759 2762

ISO

2768-1

ISO ISO ISO ISO ISO ISO

2768-2 2769 2772-1 2772-2 2773-1 2773-2

ISO ISO ISO

2775 2776 2777

Woodworking Tools - Chisels and Gouges Second Edition Woodworking Tools - Wooden Bodied Planes First Edition Vitreous and Porcelain Enamels - Apparatus for Testing with Acid and Neutral Liquids and Their Vapours Second Edition Vitreous and Porcelain Enamels - Apparatus for Testing with Alkaline Liquids Third Edition Concrete Tests - Test Specimens - Part 2: Making and Curing of Test Specimens for Strength Tests First Edition [Replaced By: ISO 1920-3] Sintered Metal Materials, Excluding Hardmetals - Permeable Sintered Metal Materials - Determination of Density, Oil Content and Open Porosity Third Edition Sintered metal bushes Determination of radial crushing strength Second Edition Sintered metal materials, excluding hardmetals ù Tensile test pieces Fourth Edition Zinc Alloys - Complexometric Determination of Magnesium First Edition Vitreous and Porcelain Enamels - Determination of Resistance to Boiling Citric Acid Third Edition Vitreous and Porcelain Enamels - Determination of Resistance to Condensing Hydrochloric Acid Vapour Second Edition Vitreous and Porcelain Enamels - Determination of Resistance to Boiling Water and Water Vapour Third Edition Vitreous and Porcelain Enamels - Determination of Resistance to Hot Sodium Hydroxide Second Edition Vitreous and Porcelain Enamels - Enamelled Articles for Service under Highly Corrosive Conditions - High Voltage Test Second Edition Vitreous and Porcelain Enamels - Enamelled Cooking Utensils - Determination of Resistance to Thermal Shock Second Edition Textile Machinery and Accessories - Lingoes for Jacquard Weaving Second Edition Paper - Determination of Bursting Strength Third Edition Board - Determination of Bursting Strength Third Edition Hydrochloric Acid for Industrial Use - Determination of Soluble Sulphates - Turbidimetric Method First Edition General Tolerances - Part 1: Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications First Edition; (CEN EN 22768-1: 1993) General Tolerances - Part 2: Geometrical Tolerances for Features without Individual Tolerance Indications First Edition; CEN EN 22768-2: 1993 Modular Units for Machine Tool Construction - Wing Bases for Slide Units First Edition; (NZS 5217: 1974) Test Conditions for Box Type Vertical Drilling Machines - Testing of the Accuracy - Part I: Geometrical Tests First Edition Test Conditions for Box Type Vertical Drilling Machines - Testing of the Accuracy - Part II: Practical Test First Edition Test Conditions for Pillar Type Vertical Drilling Machines - Testing of the Accuracy - Part I: Geometrical Test First Edition Test Conditions for Pillar Type Vertical Drilling Machines - Testing of the Accuracy - Part II: Practical Test First Edition Office Machines and Printing Machines Used for Information Processing - Widths of One-Time Paper or Plastic Printing Ribbons and Marking to Indicate the End of the Ribbons Second Edition Modular Co-Ordination - Co-Ordinating Sizes for Doorsets - External and Internal First Edition Modular Co-Ordination - Co-Ordinating Sizes for Rigid Flat Sheet Boards Used in Building First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

2780 2781 2782 2784 2787 2788 2789 2790 2795 2796 2797 2800 2804 2806 2808 2810

ISO

2811-1

Milling cutters with tenon drive Interchangeability dimensions for cutter arbors Metric series Third Edition Rubber, Vulcanized - Determination of Density Third Edition; Technical Corigendum 1:06/01/1996 Rubber, vulcanized or thermoplastic Determination of permeability to gases Third Edition Continuous Forms Used for Information Processing - Sizes and Sprocket Feed Holes First Edition Rotary and Percussive Pneumatic Tools - Performance Tests Second Edition Documentation - Guidelines for the Establishment and Development of Monolingual Thesauri Second Edition Information and documentation International library statistics Fourth Edition Belt drives V-belts for the automotive industry and corresponding pulleys Dimensions Fourth Edition Plain Bearings - Sintered Bushes - Dimensions and Tolerances Fourth Edition; (NZS/ISO 2795: 1991) Cellular Plastics, Rigid - Test for Dimensional Stability Third Edition Textile Glass - Rovings - Basis for a Specification Second Edition Photography - Expendable Photoflash Lamps - Definition and Evaluation of Flashability First Edition; (Erratum-1980) Wire, Bar or Tube Drawing Dies - As-Sintered Pellets of Hardmetal (Carbide) - Dimensions Second Edition Industrial Automation Systems - Numerical Control of Machines - Vocabulary Second Edition Paints and Varnishes - Determination of Film Thickness Fourth Edition Paints and varnishes Natural weathering of coatings Exposure and assessment Second Edition Paints and Varnishes - Determination of Density - Part 1: Pyknometer Method First Edition; Replaces ISO 2811 Supercedes ISO 8962

ISO

2811-2

Paints and Varnishes - Determination of Density - Part 2: Immersed Body (Plummet) Method First Edition; Replaces ISO 2811

ISO ISO ISO ISO ISO ISO ISO

2811-3 2811-4 2812-1 2812-2 2812-3 2812-4 2812-5

ISO ISO ISO ISO ISO

2813 2814 2815 2817 2818

ISO

2819

Paints and Varnishes - Determination of Density - Part 3: Oscillation Method First Edition; Replaces ISO 2811 Supercedes ISO 8962 Paints and Varnishes - Determination of Density - Part 4: Pressure Cup Method First Edition; Replaces ISO 2811 Paints and varnishes ù Determination of resistance to liquids ù Part 1: Immersion in liquids other than water Second Edition Paints and varnishes ù Determination of resistance to liquids ù Part 2: Water immersion method Second Edition Paints and varnishes ù Determination of resistance to liquids ù Part 3: Method using an absorbent medium First Edition Paints and varnishes ù Determination of resistance to liquids ù Part 4: Spotting methods First Edition Paints and varnishes ù Determination of resistance to liquids ù Part 5: Temperature-gradient oven method First Edition Paints and Varnishes - Determination of Specular Gloss of Non-Metallic Paint Films at 20 Degrees, 60 Degrees and 85 Degrees Third Edition; AS/NZS 1580.602.2:1995; Corrigendum 1 02/15/1997 Paints and Varnishes - Comparison of Contrast Ratio (Hiding Power) of Paints of the Same Type and Colour First Edition Paints and Varnishes - Buchholz Indentation Test Second Edition Tobacco and Tobacco Products - Determination of Silicated Residues Insoluble in Hydrochloric Acid Second Edition Plastics - Preparation of Test Specimens by Machining Third Edition Metallic Coatings on Metallic Substrates - Electrodeposited and Chemically Deposited Coatings - Review of Methods Available for Testing Adhesion Second Edition; (CEN EN ISO 2819: 1994) (PNS 686: 1990)

ISO

2820

Leather - Raw Hides of Cattle and Horses - Method of Trim First Edition; PNS 960:1986; Amendment 1 - 1996

ISO ISO ISO ISO ISO

2821 2822-1 2825 2826 2827

ISO

2828

ISO ISO ISO ISO ISO

2829 2830 2831 2832 2833

ISO ISO

2834-1 2835

ISO

2836

ISO

2846-1

ISO

2846-2

ISO ISO

2846-3 2846-4

Leather - Raw Hides of Cattle and Horses - Preservation by Stack Salting First Edition; PNS 961: 1986; Amendment 1 - 1996 Raw Cattle Hides and Calf Skins - Part 1: Descriptions of Defects First Edition Spices and Condiments - Preparation of a Ground Sample for Analysis Second Edition Apricots - Guide to Cold Storage First Edition Photography - Electronic Flash Equipment - Determination of Light Output and Performance Second Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Fluorine Content - Alizarin Complexone and Lanthanum Chloride Spectrophotometric Method First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Phosphorus Content - Reduced Phosphomolybdate Spectrophotometric Method First Edition Cryolite, Natural and Artificial - Determination of Aluminium Content - Atomic Absorption Method First Edition Sodium Fluoride for Industrial Use - Determination of Water-Insoluble Matter First Edition Sodium Fluoride for Industrial Use - Determination of Moisture Content First Edition Sodium Fluoride for Industrial Use - Determination of Fluorine Content - Modified Willard-Winter Method First Edition Graphic technology Laboratory preparation of test prints Part 1: Paste inks First Edition; Together with ISO 2834-2 and ISO 2834-3 Replaces ISO 2834:1999 Prints and Printing Inks - Assessment of Light Fastness First Edition Graphic technology Prints and printing inks Assessment of resistance to various agents Third Edition; Cancels and Replaces ISO 2837:1996; ISO 11628:1995 Graphic technology Colour and transparency of printing ink sets for fourcolour printing Part 1: Sheet-fed and heat-set web offset lithographic printing Second Edition Graphic Technology - Colour and Transparency of Ink Sets for Four-Colour-Printing - Part 2: Coldset offset Lithographic Printing First Edition Graphic Technology - Colour and Transparency of Printing Ink Sets for Four-Colour-Printing - Part 3: Publication Gravure Printing First Edition Graphic Technology - Colour and Transparency of Ink Sets for Four-Colour-Printing - Part 4: Screen Printing First Edition

ISO ISO ISO ISO ISO ISO

2846-5 2848 2851 2852 2853 2854

Graphic technology Colour and transparency of printing ink sets for four-colour printing Part 5: Flexographic printing First Edition Building Construction - Modular Coordination - Principles and Rules Second Edition; (PNS 638: 1988) Stainless Steel Bends and Tees for the Food Industry Second Edition Stainless Steel Clamp Pipe Couplings for the Food Industry Second Edition Stainless Steel Threaded Couplings for the Food Industry Second Edition Statistical Interpretation of Data - Techniques of Estimation and Tests Relating to Means and Variances First Edition

ISO

2855

Radioactive Materials - Packagings - Tests for Contents Leakage and Radiation Leakage First Edition; (Amendment Slip-1976)

ISO

2857

ISO

2858

ISO

2859-1

ISO ISO

2859-2 2859-3

ISO

2859-4

ISO

2859-5

ISO ISO ISO ISO

2859-10 2860 2861-1 2861-2

ISO ISO

2865 2867

ISO

2868

ISO

2869

ISO

2870

ISO

2871-1

ISO ISO ISO ISO ISO ISO

2871-2 2873 2875 2876 2878 2881

Ground Thread Taps for ISO Metric Threads of Tolerances 4H to 8H and 4G to 6G Coarse and Fine Pitches - Manufacturing Tolerances on the Threaded Portion First Edition; (Amendment 1-1984) (Amendment 2-1986) (Corrigendum 1-1990) End-Suction Centrifugal Pumps (Rating 16 Bar) - Designation, Nominal Duty Point and Dimensions Second Edition; (CEN EN 22858: 1993) Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-byLot Inspection Second Edition; Corrigendum 1: 03-01-2001 Sampling Procedures for Inspection by Attributes - Part 2: Sampling Plans Indexed by Limiting Quality (LQ) for Isolated Lot Inspection First Edition Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures Second edition Sampling Procedures for Inspection by Attributes - Part 4: Procedures for Assessment of Declared Quality Levels Second Edition Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection First Edition Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes First Edition; Supersedes ISO 2859-0:1995 Earth-Moving Machinery - Minimum Access Dimensions Fourth Edition Vacuum Technology - Quick-Release Couplings - Dimensions - Part I: Clamped Type First Edition Vacuum Technology - Quick Release Couplings - Dimensions - Part 2: Screwed Type First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Boron Content - Curcumin Spectrophotometric Method First Edition; Corrigendum 1: 1991 Earth-Moving Machinery - Access Systems Sixth Edition Surface Active Agents - Detergents - Anionic-Active Matter Stable to Acid Hydrolysis - Determination of Trace Amounts First Edition Surface Active Agents - Detergents - Anionic-Active Matter Hydrolyzable Under Alkaline Conditions - Determination of Hydrolyzable and Non-Hydrolyzable Anionic-Active Matter First Edition Surface Active Agents - Detergents - Determination of Anionic-Active Matter Hydrolyzable and Non-Hydrolyzable Under AcidConditions Second Edition Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 1: High-Molecular-Mass Cationic-Active Matter First Edition Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 2: Cationic-Active Matter of Low Molecular Mass (Between 200 and 500) First Edition Corrected and Reprinted 12/15/1991 Packaging - Complete, Filled Transport Packages and Unit Loads - Low Pressure Test Third Edition Packaging - Complete, Filled Transport Packages and Unit Loads - Water-Spray Test Third Edition Packaging - Complete, Filled Transport Packages - Rolling Test Second Edition; (CEN EN 22876: 1992) Rubber - Antistatic and conductive products - Determination of electrical resistance Third Edition Tobacco and Tobacco Products - Determination of Alkaloid Content - Spectrophotometric Method Third Edition

Paints and Varnishes - Determination of Viscosity Using Rotary Viscometers - Part 1: Cone-and-Plate Viscometer Operated at a High Rate of Shear First Edition; Superseded by BS 3900-A7-1: 2000 Paints and Varnishes - Determination of Viscosity Using Rotary Viscometers - Part 2: Disc or Ball Viscometer Operated at a Specified Speed First Edition General Principles for Sampling Airborne Radioactive Materials First Edition Modular Units for Machine Tool Construction - Centre Bases and Columns Second Edition Austenitic cast irons - Classification Second edition Rigid Cellular Plastics - Determination of Water Absorption Third Edition Plastics - Impact-Resistant Polystyrene (PS-I) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Second Edition Plastics Impact-resistant polystyrene (PS-I) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties Third Edition Plastics - Plasticized Poly(Vinyl Chloride) (PVC-P) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Third Edition Plastics - Plasticized Poly(Vinyl Chloride) (PVC-P) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties Third Edition ISO Metric Trapezoidal Screw Threads - Basic Profile and Maximum Material Profiles Second Edition ISO Metric Trapezoidal Screw Threads - General Plan First Edition ISO Metric Trapezoidal Screw Threads - Tolerances Second Edition ISO Metric Trapezoidal Screw Threads - Basic Dimensions First Edition

ISO

2884-1

ISO ISO ISO ISO ISO

2884-2 2889 2891 2892 2896

ISO

2897-1

ISO

2897-2

ISO

2898-1

ISO ISO ISO ISO ISO

2898-2 2901 2902 2903 2904

ISO

2905

Modular Units for Machine Tool Construction - Spindle Noses and Adjustable Adaptors for Multi-Spindle Heads Second Edition

ISO ISO ISO ISO ISO ISO

2906 2907 2908 2909 2910 2911

ISO ISO ISO ISO ISO ISO

2912 2913 2915 2916 2917 2918

Cinematography - Image Area Produced by Camera Aperture on 35 mm Motion-Picture Film - Position and Dimensions Third Edition Cinematography - Maximum Projectable Image Area on 35 mm Motion-Picture Film - Position and Dimensions Third Edition Petroleum Waxes - Determination of Oil Content First Edition Petroleum products - Calculation of viscosity index from kinematic viscosity Third Edition Cinematography ù Screen luminance and chrominance for the projection of motion pictures Third edition Sweetened Condensed Milk - Determination of Sucrose Content - Polarimetric Method Second Edition Modular Units for Machine Tool Construction - Multi-Spindle Heads - Casing and Input Drive Shaft Dimensions First Edition; Amendment 1: 1982 Wool - Colorimetric Determination of Cystine Plus Cysteine in Hydrolysates First Edition Wool - Determination of Cysteic Acid Content of Wool Hydrolysates by Paper Electrophoresis and Colorimetry First Edition Wool - Determination of Alkali Content First Edition Meat and Meat Products - Measurement of pH - Reference Method Second Edition Meat and Meat Products - Determination of Nitrite Content (Reference Method) First Edition; (PNS 608: 1992)

Radioactive Protection - Sealed Radioactive Sources - General Requirements and Classification Second Edition; Cancels and Replaces ISO 1677: 1977 Whey Cheese - Determination of Dry Matter Content (Reference Method) Second Edition: IDF 58 Rubber, Vulcanized - Determination of Low-Temperature Characteristics - Temperature-Retraction Procedure (TR Test) Fourth edition Acoustics - Measurement of Airborne Sound Emitted by Vessels on Inland Waterways and Harbours Second Edition Acoustics - Measurement of Noise on Board Vessels Second Edition; Technical Corrigendum 1-1997 Solid and Segmental Circular Saws for Cold Cutting of Metals - Interchangeability Dimensions of the Drive - Saw Diameter Range 224 to 2 240 mm First Edition Aluminium oxide used for the production of primary aluminium Particle size analysis for the range 45 Ám to 150 Ám Method using electroformed sieves Second Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Sampling First Edition Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) Specification Third Edition Rubber Hoses and Hose Assemblies for Bulk Fuel Delivery by Truck - Specification Third Edition Rubber, Raw Natural - Determination of Plasticity Retention Index (PRI) Third Edition Anodizing of Aluminium and Its Alloys - Assessment of Quality of Sealed Anodic Oxide Coatings by Measurement of Admittance or Impedance Second Edition Modular Units for Machine Tool Construction - Wing Base for Columns First Edition; (NZS 5220: 1974) Circular Saw Blades for Woodworking - Dimensions First Edition Assembly Tools for Screws and Nuts - Hexagon Socket Screw Keys Fifth Edition Plain End Seamless Steel Tubes for Mechanical Application First Edition Hollow Steel Bars for Machining First Edition; (Erratum-1979) Cinematography - Picture Image Area on 35 mm Motion-Picture Release Prints - Position and Dimensions Third Edition

ISO ISO

2919 2920

ISO ISO ISO

2921 2922 2923

ISO

2924

ISO ISO

2926 2927

ISO ISO ISO

2928 2929 2930

ISO ISO ISO ISO ISO ISO ISO

2931 2934 2935 2936 2937 2938 2939

ISO ISO ISO

2940-1 2940-2 2941

ISO ISO ISO

2942 2943 2944

Milling Cutters Mounted on Centring Arbors Having a 7/24 Taper - Fitting Dimensions - Centring Arbors First Edition; (Erratum-1977) Milling Cutters Mounted on Centring Arbors Having a 7/24 Taper - Inserted Tooth Cutters First Edition; (Erratum-1977) Hydraulic Fluid Power - Filter Elements - Verification of Collapse/Burst Resistance First Edition Hydraulic Fluid Power - Filter Elements - Verification of Fabrication Integrity and Determination of the First Bubble Point Fourth Edition Hydraulic Fluid Power - Filter Elements - Verification of Material Compatibility with Fluids Second Edition Fluid Power Systems and Components - Nominal Pressures Second Edition

ISO ISO ISO

2947 2950 2951

Textiles - Integrated Conversion Table for Replacing Traditional Yarn Numbers by Rounded Values in the Tex System First Edition Brown Coals and Lignites - Classification by Types on the Basis of Total Moisture Content and Tar Yield First Edition Vulcanized Rubber - Determination of Insulation Resistance First Edition

ISO

2953

ISO ISO ISO ISO

2954 2958 2959 2961

ISO ISO

2962 2964

ISO

2965

ISO

2969

ISO ISO ISO ISO

2971 2972 2974 2975-1

ISO

2975-2

ISO

2975-3

ISO

2975-6

ISO ISO ISO ISO ISO ISO ISO ISO ISO

2975-7 2976 2977 2982-1 2982-2 2992 2993 2997 3001

ISO

3002-1

Machanical Vibration - Balancing Machines - Description and Evaluation Third Edition Mechanical Vibration of Rotating and Reciprocating Machinery - Requirements for Instruments for Measuring Vibration Severity First Edition Road Vehicles - Exterior Protection for Passenger Cars First Edition Textiles - Woven Fabric Descriptions First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of an Adsorption Index First Edition Cheese and Processed Cheese Products - Determination of Total Phosphorus Content - Molecular Absorption Spectrometric Method Second Edition Aerospace - Tubing - Outside Diameters and Thicknesses - Metric Dimensions Second Edition Material Used as Cigarette Papers, Filter Plug Wrap and Filter Joining Paper, Including Materials having an Oriented Permeable Zone - Determination of Air Permeability Second Edition Cinematography - B-Chain Electro-Acoustic Response of Motion-Picture Control Rooms and Indoor Theatres - Specifications and Measurements Second Edition Cigarettes and Filter Rods - Determination of Nominal Diameter - Method Using a Laser Beam Measuring Apparatus Third Edition Numerical Control of Machines - Symbols Second Edition Diesel engines - High-pressure fuel injection pipe end-connections with 60 Degree female cone Sixth Edition Measurement of Water FLow in Closed Conduits - Tracer Methods - Part I: General First Edition Measurement of Water Flow in Closed Conduits - Tracer Methods - Part II: Constant Rate Injection Method Using Non-Radioactive Tracers First Edition Measurement of Water Flow in Closed Conduits - Tracer Methods - Part III: Constant Rate Injection Method Using Radioactive Tracers First Edition Measurement of Water Flow in Closed Conduits - Tracer Methods - Part VI: Transit Time Method Using Non-Radioactive Tracers First Edition Measurement of Water Flow in Closed Conduits - Tracer Methods - Part VII: Transit Time Method Using Radioactive Tracers First Edition Coated abrasives Abrasive belts Selection of width/length combinations Second Edition Petroleum Products and Hydrocarbon Solvents - Determination of Aniline Point and Mixed Aniline Point Third Edition Rolling Bearings - Accessories - Part 1: Tapered Sleeves - Dimensions First Edition; Replaces ISO 113-1: 1979 Rolling Bearings - Accessories - Part 2: Locknuts and Locking Devices - Dimensions Second Edition Ammonium Sulphate for Industrial Use - Determination of Iron Content - 2,2'-Bipyridyl Photometric Method First Edition Ammonium Sulphate for Industrial Use - Determination of Free Acidity - Titrimetric Method First Edition Phosphoric Acid for Industrial Use - Determination of Sulphate Content - Method by Reduction and Titrimetry First Edition Plastics - Epoxy Compounds - Determination of Epoxy Equivalent Fourth Edition Basic Quantities in Cutting and Grinding - Part 1: Geometry of the Active Part of Cutting Tools - General Terms, Reference Systems, Tool and Working Angles, Chip Breakers Second Edition; (Amendment 1-1992)

Basic Quantities in Cutting and Grinding - Part 2: Geometry of the Active Part of Cutting Tools - General Conversion Formulae to Relate Tool and Working Angles First Edition Basic Quantities in Cutting and Grinding - Part 3: Geometric and Kinematic Quantities in Cutting First Edition Basic Quantities in Cutting and Grinding - Part 4: Forces, Energy, Power First Edition

ISO ISO ISO

3002-2 3002-3 3002-4

ISO ISO ISO ISO ISO ISO ISO ISO

3002-5 3005 3006 3007 3008 3009 3010 3011

ISO ISO ISO ISO ISO ISO

3012 3013 3014 3015 3016 3018

ISO

3019-1

ISO ISO ISO

3019-2 3022 3023

ISO

3024

ISO ISO ISO

3026 3028 3030

Basic Quantities in Cutting and Grinding - Part 5: Basic Terminology for Grinding Processes Using Grinding Wheels First Edition Textiles - Determination of Dimensional Change of Fabrics Induced by Free-Steam Second Edition Road vehicles Passenger car wheels for road use Test methods Fourth edition Petroleum Products and Crude Petroleum - Determination of Vapour Pressure - Reid Method Third Edition Fire-resistance tests ù Door and shutter assemblies Third edition Fire-resistance tests Elements of building construction Glazed elements Second Edition Basis for design of structures Seismic actions on structures Second Edition Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Ozone Cracking Under Static Conditions Third Edition Petroleum Products - Determination of Thiol (Mercaptan) Sulfur in Light and Middle Distillate Fuels - Potentiometric Method Third Edition Petroleum Products - Determination of the Freezing Point of Aviation Fuels First Edition Petroleum Products - Determination of the Smoke Point of Kerosine Third Edition Petroleum Products - Determination of Cloud Point Second Edition; (CEN EN 23015: 1994) Petroleum Products - Determination of Pour Point Second Edition; Corrected and Reprinted - 1995 Rectangular Textile Floor Coverings - Determination of Dimensions First Edition (AS/NZS 2111.20: 1996) Hydraulic Fluid Power - Dimensions and Identification Code for Mounting Flanges and Shaft Ends of Displacement Pumps and Motors - Part 1: Inch Series Shown in Metric Units Second Edition; Supersedes ISO 3019/1 Hydraulic fluid power Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Part 2: Metric series Third Edition; Technical Corrigendum 1: 12/01/2006;:1988 [Replaced: ISO 3019-3] Cinematography - 35 mm Motion-Picture Film Perforated 16 mm (1-3-0) - Cutting and Perforating Dimensions Third Edition Cinematography - 65 mm and 70 mm Unexposed Motion-Picture Film - Cutting and Perforating Dimensions Fourth Edition Cinematography - Motion-Picture Camera Cartridge, 8 mm Type S, Model I - Camera Run Length, Perforation Cut-Out and End-ofRun Notch in Film - Specifications Second Edition Cinematography - Printed 8 mm Type S Image Area on 35 mm Motion-Picture Film Perforated 8 mm Type S, 2R-4.227 (1664) or 5R4.234 (1667) - Position and Dimensions Second Edition Photography - Camera Flash Illuminants - Determination of ISO Spectral Distribution Index (ISO/SDI) Second Edition Roller Bearings - Radial Needle Roller and Cage Assemblies - Dimensions and Tolerances Second Edition

ISO ISO

3031 3033-1

Roller Bearings - Thrust Needle Roller and Cage Assemblies, Thrust Washers - Boundary Dimensions and Tolerances Third Edition Oil of spearmint Part 1: Native type (Mentha spicata L.) First Edition; Supersedes ISO 3033:1998

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

3033-2 3033-3 3033-4 3034 3035 3036 3037 3038 3039 3040

ISO ISO ISO ISO

3042 3043 3044 3045

ISO ISO ISO ISO

3046-1 3046-3 3046-4 3046-5

ISO

3046-6

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

3047 3048 3049 3051 3052 3053 3054 3055 3056 3057 3058

Oil of spearmint Part 2: Chinese type (80 % and 60 %) (Mentha viridis L. var. crispa Benth.), redistilled oil First Edition; Supersedes ISO 3033:1998 Oil of spearmint Part 3: Indian type (Mentha spicata L.), redistilled oil First Edition; Supersedes ISO 3033:1998 Oil of spearmint Part 4: Scotch variety (Mentha Î gracilis Sole) First Edition; Supersedes ISO 3033:1998 Corrugated Fibreboard - Determination of Thickness First Edition Single-Faced and Single-Wall Corrugated Fibreboard - Determination of Flat Crush Resistance Second Edition Board - Determination of Puncture Resistance First Edition Corrugated fibreboard ù Determination of edgewise crush resistance (unwaxed edge method) Fourth Edition Corrugated Fibreboard - Determination of the Water Resistance of the Glue Bond by Immersion First Edition Corrugated Fibreboard - Determination of the Grammage of the Component Papers After Separation First Edition Technical Drawings - Dimensioning and Tolerancing - Cones Second Edition Cinematography - Labelling of Containers for Raw-Stock Motion-Picture Films and Magnetic Films - Minimum Information Specifications Third Edition; Corrigendum 1:2/1/2004 Oil of Pimento Berry First Edition Oil of Eucalyptus Citriodora Hook. Second Edition Oil of bay [Pimenta racemosa (Mill.) J.W. Moore] Second Edition Reciprocating Internal Combustion Engines - Performance - Part 1: Declarations of Power, Fuel and Lubricating Oil Consumptions, and Test Methods - Additional Requirements for Engines for General Use Fifth Edition Reciprocating Internal Combustion Engines - Performance - Part 3: Test Measurements Third Edition Reciprocating Internal Combustion Engines - Part 4: Speed Governing Second Edition Reciprocating Internal Combustion Engines - Performance - Part 5: Torsional Vibrations Second Edition Reciprocating Internal Combustion Engines - Performance - Part 6: Overspeed Protection Third Edition; Corrected and Reprinted 12/15/1991 Cinematography - Spool, Daylight Loading Type, for 35 mm Motion-Picture Cameras (Capacity 30 m - 100 ft) - Dimensions Second Edition Gypsum Plasters - General Test Conditions First Edition Gypsum Plasters - Determination of Physical Properties of Powder First Edition Gypsum Plasters - Determination of Mechanical Properties First Edition Gypsum Plasters - Determination of Water of Crystallization Content First Edition Oil of grapefruit (Citrus Î paradisi Macfad.), obtained by expression Second Edition Oil of Lavandin Abrial (Lavandula Angustifolia Miller X Lavandula Latifolia Medikus), French Type Third Edition Kitchen Equipment - Coordinating Sizes Second Edition Non-Calibrated Round Steel Link Lifting Chain and Chain Slings - Use and Maintenance Second Edition Non-Destructive Testing - Metallographic Replica Techniques of Surface Examination Second Edition Non-Destructive Testing - Aids to Visual Inspection - Selection of Low-Power Magnifiers Second Edition

Non-Destructive Testing - Penetrant Testing and Magnetic Particle Testing - Viewing Conditions Second Edition; Corrected and Reprinted: 01/15/2002 Cotton Fibres - Determination of Breaking Tenacity of Flat Bundles First Edition Oil of Black Pepper First Edition Oil of ylang-ylang [Cananga odorata (Lam.) Hook. f. et Thomson forma genuina] Second Edition Oil of Petitgrain, Paraguayan Type (Citrus Aurantium L. ssp. Aurantium, syn. Citrus Aurantium L. ssp. Amara var. Pumilia) Second Edition Oil of Australian Eucalyptus, 80 to 85 % Cineole Content First Edition Duplicating Machines - Registration Second Edition End-Suction Centrifugal Pumps - Dimensions of Cavities for Mechanical Seals and for Soft Packing Second Edition Acceptance Conditions for Boring and Milling Machines with Horizontal Spindle - Testing of the Accuracy - Part 0: General Introduction Second Edition Test Conditions for Boring and Milling Machines with Horizontal Spindle - Part 2: Table-Type Machines Third Edition Test Conditions for Boring and Milling Machines with Horizontal Spindle - Testing of the Accuracy - Part 3: Floor Type Machines with Detached,Stationary Work-Holding Table Second Edition Test Conditions for Boring and Milling Machines with Horizontal Spindle - Testing of the Accuracy - Part 4: Planer Type Machines with Movable Column Second Edition Textiles - Determination of pH of the Aqueous Extract Third Edition Wool - Determination of Solubility in Alkali First Edition Wool - Determination of Acid Content First Edition Wool - Determination of Dichloromethane-Soluble Matter in Combed Sliver First Edition

ISO ISO ISO ISO

3059 3060 3061 3063

ISO ISO ISO ISO

3064 3065 3066 3069

ISO ISO

3070-0 3070-2

ISO

3070-3

ISO ISO ISO ISO ISO

3070-4 3071 3072 3073 3074

ISO

3075

Short Link Chain for Lifting Purposes - Grade S (6), Non-Calibrated, for Chain Slings, Etc. First Edition; (NZS/ISO 3075: 1980)

ISO ISO ISO ISO ISO

3076 3077 3078 3082 3084

Short Link Chain for Lifting Purposes - Grade T (8), Non-Calibrated, for Chain Slings, Etc. Second Edition; (NZS/ISO 3076: 1984) Short Link Chain for Lifting Purposes - Grade T, (Types T, DAT and DT), Fine Tolerance Hoist Chain Third Edition Shipbuilding - Cargo Winches Second Edition Iron Ores - Sampling and Sample Preparation Procedures Third Edition Iron Ores - Experimental Methods for Evaluation of Quality Variation Third Edition

ISO ISO ISO ISO ISO

3085 3086 3087 3089 3091

Iron Ores - Experimental Methods for Checking the Precision of Sampling, Sample Preparation and Measurement Fourth Edition Iron ores Experimental methods for checking the bias of sampling Fourth Edition Iron Ores - Determination of the Moisture Content of a Lot Third Edition Machine tools Test conditions for self-centring, manually-operated chucks with one-piece jaws Third Edition Meat and Meat Products - Determination of Nitrate Content (Reference Method) First Edition

Wheat, rye and respective flours, durum wheat and durum wheat semolina Determination of the Falling Number according to Hagberg-Perten Third Edition Railway applications Acoustics Measurement of noise emitted by railbound vehicles Second Edition Rolling Bearings - Needle Rollers - Dimensions and Tolerances Second Edition; Corrigendum 1 07/15/1999; Replaces ISO 6193; 1980 Technical Product Documentation - Lettering - Part 0: General Requirements First Edition Technical Product Documentation - Lettering - Part 2: Latin Alphabet, Numerals and Marks Second Edition Technical Product Documentation - Lettering - Part 3: Greek Alphabet Second Edition Technical Product Documentation - Lettering - Part 4: Diacritical and Particular Marks for the Latin Alphabet Second Edition

ISO ISO

3093 3095

ISO ISO ISO ISO ISO

3096 3098-0 3098-2 3098-3 3098-4

ISO ISO ISO

3098-5 3098-6 3103

ISO ISO ISO ISO ISO ISO ISO ISO

3104 3105 3107 CORR 1 3107 3108 3110 3111 3112

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

3114 3116 3117 3126 3127 3129 3130 3131 3132 3133 3134-1

Unplasticized Polyvinyl Chloride (PVC) Pipes for Potable Water Supply - Extractability of Lead and Tin - Test Method First Edition Magnesium and magnesium alloys ù Wrought magnesium alloys Fourth edition Tangential Keys and Keyways First Edition Plastics piping systems Plastics components Determination of dimensions Second edition Thermoplastics Pipes - Determination of Resistance to External Blows - Round-the-Clock Method Second Edition Wood - Sampling Methods and General Requirements for Physical and Mechanical Tests First Edition; (PNS 968: 1989) Wood - Determination of Moisture Content for Physical and Mechanical Tests First Edition Wood - Determination of Density for Physical and Mechanical Tests First Edition Wood - Testing in Compression Perpendicular to Grain First Edition; (PNS 969: 1989) Wood - Determination of Ultimate Strength in Static Bending First Edition Light Metals and Their Alloys - Terms and Definitions - Part 1: Materials First Edition; (Corrected and Reprinted - 1989)

ISO

3134-2

Light Metals and Their Alloys - Terms and Definitions - Part 2: Unwrought Products First Edition; (Corrected and Reprinted - 1989)

Technical Product Documentation - Lettering - Part 5: CAD Lettering of the Latin Alphabet, Numerals and Marks First Edition Technical Product Documentation - - Lettering - Part 6: Cyrillic Alphabet First Edition Tea - Preparation of Liquor for Use in Sensory Tests First Edition Petroleum Products - Transparent and Opaque Liquids - Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity Second Edition; Corrigendum 1-1997; Glass Capillary Kinematic Viscometers - Specifications and Operating Instructions Second Edition Dentistry ù Zinc oxide/eugenol and zinc oxide/non-eugenol cements TECHNICAL CORRIGENDUM 1 Third Edition Dentistry ù Zinc oxide/eugenol and zinc oxide/non-eugenol cements Third Edition Steel Wire Ropes for General Purposes - Determination of Actual Breaking Load First Edition Copper Alloys - Determination of Aluminium as Alloying Element - Volumetric Method First Edition Copper Alloys - Determination of Tin as Alloying Element - Volumetric Method First Edition Copper and Copper Alloys - Determination of Lead - Extracting Titration Method First Edition

ISO ISO ISO ISO ISO ISO ISO

3134-3 3134-4 3134-5 3136 3137 3139 3140

ISO

3141

ISO

3142

ISO

3143

ISO ISO ISO ISO

3146 3150 3154 3155

ISO ISO ISO ISO

3156 3157 3158 3159

ISO

3160-1

ISO

3160-2

ISO ISO

3160-3 3161

ISO ISO

3164 3165

ISO

3166-1 CORR 1

Light Metals and Their Alloys - Terms and Definitions - Part 3: Wrought Products First Edition; (Corrected and Reprinted - 1989) Light Metals and Their Alloys - Terms and Definitions - Part 4: Castings First Edition; (Corrected and Reprinted - 1989) Light Metals and Their Alloys - Terms and Definitions - Part 5: Methods of Processing and Treatment First Edition Rubber Latex - Styrene-Butadiene - Determination of Bound Styrene Content Second Edition Anhydrous Hydrogen Fluoride for Industrial Use - Sampling First Edition Aqueous Hydrofluoric Acid for Industrial Use - Sampling and Methods of Test Second Edition; Amendment 1: 1980 Oil of sweet orange [Citrus sinensis (L.) Osbeck], obtained by mechanical treatment Third Edition Oil of Clove Leaf [Syzygium Aromaticum (L.) Merr. Et Perry, Syn. Eugenia Caryophyllus (Sprengel) Bullock Et S. Harrison] Third Edition Oil of Clove Buds [Syzygium Aromaticum (L.) Merr. Et Perry, Syn. Eugenia Caryophyllus (Sprengel) Bullock Et S. Harrison] Second Edition Oil of Clove Stems [Syzygium Aromaticum (L.) Merr. Et Perry, Syn. Eugenia Caryophyllus (Sprengel) Bullock Et S. Harrison] Second Edition Plastics - Determination of Melting Behaviour (Melting Temperature or Melting Range) of Semi-Crystalline Polymers by Capillary Tube and Polarizing-Microscope Methods Third Edition; Technical Corrigendum 1: 10/15/2002 Radiators, Convectors and Similar Appliances - Calculation of Thermal Output and Presentation of Results First Edition Stranded Wire Ropes for Mine Hoisting - Technical Delivery Requirements Second Edition Stranded Wire Ropes for Mine Hoisting - Fibre Components - Characteristics and Tests First Edition Stranded Wire Ropes for Mine Hoisting - Impregnating Compounds, Lubricants and Service Dressings - Characteristics and Tests First Edition Radioluminescence for Time Measurement Instruments - Specifications Second Edition Timekeeping Instruments - Symbolization of Control Positions First Edition Timekeeping Instruments - Wrist-Chronometers with Spring Balance Oscillator First Edition Watch-Cases and Accessories - Gold Alloy Coverings - Part 1: General Requirements Third Edition; Amendment 1: 02-15-2000 Watch-cases and accessories Gold alloy coverings Part 2: Determination of fineness, thickness, corrosion resistance and adhesion Third Edition Watch Cases and Accessories - Gold Alloy Coverings - Part 3: Abrasion Resistance Tests of a Type of Coating on Standard Gauges First Edition Aerospace - UNJ Threads - General Requirements and Limit Dimensions Third Edition Earth-Moving Machinery - Laboratory Evaluations of Protective Structures - Specifications for Deflection-Limiting Volume Fifth Edition Sampling of Chemical Products for Industrial Use - Safety in Sampling First Edition Codes for the representation of names of countries and their subdivisions ù Part 1: Country codes Codes pour la reprÚsentation des noms de pays et de leurs subdivisions ù Partie 1: Codes de pays First Edition

ISO

3166-1

ISO

3166-2

ISO ISO

3166-3 3167

ISO ISO ISO ISO

3168 3170 3171 3174

ISO

3175-1

ISO

3175-2

ISO

3175-3

ISO ISO

3175-4 3179

ISO ISO

3183 3184

ISO

3185

ISO ISO ISO

3186 3187 3188

ISO

3189-1

Codes for the representation of names of countries and their subdivisions Part 1: Country codes Codes pour la reprÚsentation des noms de pays et de leurs subdivisions Partie 1: Codes de pays Second Edition Codes for the Representation of Names of Countries and Their Subdivisions - Part 2: Country Subdvision Code Codes pour Ia representation des noms de pays et de leurs subdivisions - Partie 2: Code pour les subdivisions de pays First Edition; Replaces ISO 3166 Codes for the Representation of Names of Countries and Their Subdivisions - Part 3: Code for Formerly Used Names of Countries Codes Pour La Representation Des Noms De Pays Et De Leurs Subdivisions - Partie 3: Code Pour Les Noms De Pays Anterieurement Utilises First Edition; Replaces ISO 3166 Plastics - Multipurpose Test Specimens Fourth Edition Aerospace - Nuts, Anchor, Self-Locking, Fixed, Single Lug with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature/315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition Petroleum Liquids - Manual Sampling Third Edition Petroleum Liquids - Automatic Pipeline Sampling Second Edition Aircraft - Connections for Checking Hydraulic Systems by Ground Appliances - Threaded Type Second Edition Textiles - Dry Cleaning and Finishing - Part 1: Method for Assessing the Cleanability of Textiles and Garments First Edition; Technical Corrigendum: 10/01/2002 Textiles - Dry Cleaning and Finishing - Part 2: Procedures for Tetrachloroethene First Edition; Technical Corrigendum: 10/01/2002 Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents First Edition Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning First Edition Coniferous Sawn Timber - Nominal Dimensions First Edition Petroleum and natural gas industries ù Steel pipe for pipeline transportation systems Second Edition [Superseded: ISO 3183-1, ISO 3183-2, ISO 3183-3] Reach and Straddle Fork-Lift Trucks - Stability Tests Second Edition; Corrigendum 1: 06-01-2000 Aerospace - Bolts, Normal Bihexagonal Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition Aerospace - Bolts, Large Bihexagonal Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes 1 250 MPa to 1 800 MPa - Dimensions First Edition Refractory Products - Determination of Creep in Compression First Edition Starches and Derived Products - Determination of Nitrogen Content by the Kjeldahl Method - Titrimetric Method First Edition Sockets for Wire Ropes for General Purposes - Part 1: General Characteristics and Conditions of Acceptance First Edition; Technical Corrigendum 1: 02/15/2002

ISO ISO

3189-2 3189-3

ISO

3190

ISO

3191

ISO

3193

ISO ISO ISO

3195 3196 3199

ISO

3202

ISO ISO ISO

3203 3205 3208

ISO

3209

ISO

3210

ISO ISO ISO ISO ISO ISO ISO

3211 3213 3214 3215 3216 3217 3218

ISO ISO

3219 3220

Sockets for Wire Ropes for General Purposes - Part 2: Special Requirements for Sockets Produced by Forging or Machined from the Solid First Edition Sockets for Wire Ropes for General Purposes - Part 3: Special Requirements for Sockets Produced by Casting First Edition Test Conditions for Turret and Single Spindle Co-Ordinate Drilling Machines with Vertical Spindle - Testing of the Accuracy First Edition Aerospace - Nuts, Anchor, Self-Locking, Fixed, Single Lug, Reduced Series, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/ 235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/ 315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/ 425 Degrees Celsius - Dimensions Second Edition Aerospace - Bolts, Normal Hexagonal Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition; Corrigendum 1: 1992 Sodium Hydroxide for Industrial Use - Sampling - Test Sample - Preparation of the Main Solution for Carrying out Certain Determinations First Edition Sodium Hydroxide for Industrial Use - Determination of Carbonates Content - Titrimetric Method First Edition Sodium Chlorate for Industrial Use - Determination of Chlorate Content - Dichromate Titrimetric Method First Edition Aerospace - Screws, Pan Head, Internal Offset Cruciform Ribbed or Unribbed Drive, Threaded to Head, MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions Second Edition Aerospace - Bolts, Normal Bihexagonal Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition Preferred Test Temperatures First Edition; (Amendment Slip-1976) Road Vehicles - Evaluation of Protrusions Inside Passenger Cars First Edition; Amendment-1974 Aerospace - Nuts, Anchor, Self-Locking, Floating, Two-Lug, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition Anodizing of Aluminium and Its Alloys - Assessment of Quality of Sealed Anodic Oxide Coatings by Measurement of the Loss of Mass After Immersion in Phosphoric-Chromic Acid Solution Second Edition Anodizing of Aluminium and Its Alloys - Assessment of Resistance of Anodic Oxide Coatings to Cracking by Deformation Second Edition Polypropylene (PP) Pipes - Effect of Time and Temperature on the Expected Strength Second Edition Oil of Litsea Cubeba ( Litsea Cubeba Pers.) Second Edition Oil of Nutmeg, Indonesian Type (Mysristica Fragrans Houtt.) Second Edition Oil of Cassia, Chinese Type (Cinnamomum Aromaticum Nees, Syn. Cinnamomum Cassia Nees Ex Blume) Second Edition Oil of Lemongrass (Cymbopogon citratus) First Edition Essential Oils - Principles of Nomenclature First Edition Plastics - Polymers/Resins in the Liquid State or as Emulsions or Dispersions - Determination of Viscosity Using a Rotational Viscometer with Defined Shear Rate Second Edition; (CEN EN ISO 3219: 1995) Copper and Copper Alloys - Determination of Arsenic - Photometric Method First Edition

ISO

3221

ISO

3222

ISO

3223

ISO

3224

ISO ISO

3225 3228

ISO ISO

3230 3231

ISO

3233

Aerospace - Nuts, Anchor, Self-Locking, Fixed, 90 Degree Corner, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition Aerospace - Nuts, Anchor, Self-Locking, Fixed, Closed Corner, Reduced Series, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition Aerospace - Nuts, Anchor, Self-Locking, Fixed, Two Lug, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition Aerospace - Nuts, Anchor, Self-Locking, Floating, Single Lug, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/425 degrees Celsius - Dimensions Second Edition Aerospace - Nuts, Anchor, Self-Locking, Fixed, Two Lug, Reduced Series, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition Rolling Bearings - Cast and Pressed Housings for Insert Bearings Third Edition Aerospace - Rivets, Solid, 100 Degree Normal Countersunk Head with Dome, Metallic Material, with or without Surface Treatment Dimensions First Edition Paints and Varnishes - Determination of Resistance to Humid Atmospheres Containing Sulphur Dioxide Second Edition Paints and Varnishes - Determination of Percentage Volume of Non-Volatile Matter by Measuring the Density of a Dried Coating Third Edition; Corrigendum 1 07/15/1999

ISO ISO ISO ISO ISO ISO

3245 3248 3251 3252 3253 3255

Rolling Bearings - Needle Roller Bearings, Drawn Cup without Inner Rings - Boundary Dimensions and Tolerances Second Edition Paints and Varnishes - Determination of the Effect of Heat Second Edition Paints, Varnishes and Plastics - Determination of Non-Volatile-Matter Content Third Edition; Powder Metallurgy - Vocabulary Metallurgie Des Poudres - Vocabulaire Fourth Edition Gas Welding Equipment - Hose Connections for Equipment for Welding, Cutting and Allied Processes Second Edition Magnesium and Magnesium Alloys - Determination of Aluminium - Chromazurol S Photometric Method First Edition

ISO ISO ISO ISO

3256 3257 3258 3260

ISO ISO

3262-1 3262-2

Aluminium and Aluminium Alloys - Determination of Magnesium - Atomic Absorption Spectrophotometric Method First Edition Rubber Compounding Ingredients - Carbon Black - Method of Evaluation in Styrene-Butadiene Rubbers Third Edition Air Distribution and Air Diffusion - Vocabulary First Edition Pulps - Determination of Chlorine Consumption (Degree of Delignification) Second Edition Extenders for Paints - Specifications and Methods of Test - Part 1: Introduction and General Test Methods First Edition; Replaces ISO 3262:1975 Extenders for Paints - Specifications and Methods of Test - Part 2: Barytes (Natural Barium Sulfate) First Edition

ISO ISO ISO ISO ISO ISO ISO ISO

3262-3 3262-4 3262-5 3262-6 3262-7 3262-8 3262-9 3262-10

Extenders for Paints - Specifications and Methods of Test - Part 3: Blanc Fixe First Edition Extenders for Paints - Specifications and Methods of Test - Part 4: Whiting First Edition Extenders for Paints - Specifications and Methods of Test - Part 5: Natural Crystalline Calcium Carbonate First Edition Extenders for Paints - Specifications and Methods of Test - Part 6: Precipitated Calcium Carbonate First Edition Extenders for Paints - Specifications and Methods of Test - Part 7: Dolomite First Edition Extenders for Paints - Specifications and Methods of Test - Part 8: Natural Clay First Edition Extenders for Paints - Specifications and Methods of Test - Part 9: Calcined Clay First Edition; Replaces 3262:1975 Extenders for Paints - Specificstions and Methods of Test - Part 10: Natural Talc/Chlorite in Lamellar Form First Edition Extenders for Paints - Specificstions and Methods of Test - Part 11: Natural Talc, in Lamellar Form, Containing Carbonates First Edition Extenders for Paints - Specificstions and Methods of Test - Part 12: Muscovite-Type Mica First Edition

ISO ISO

3262-11 3262-12

ISO ISO ISO ISO ISO ISO ISO ISO ISO

3262-13 3262-14 3262-15 3262-16 3262-17 3262-18 3262-19 3262-20 3262-21

ISO

3262-22

ISO ISO ISO ISO ISO ISO ISO

3265 3266 3267 3269 3270 3271 3272-1

ISO

3272-2

Extenders for Paints - Specifications and Methods of Test - Part 13: Natural Quartz (Ground) First Edition; Replaces ISO 3262:1975 Extenders for Paints - Specifiations and Methods of Test - Part 14: Cristobalite First Edition Extenders for Paints - Specifications and Methods of Test - Part 15: Vitreous Silica First Edition; Replaces ISO 3262:1975 Extenders for Paints - Specifications and Methods of Test - Part 16: Aluminum Hydroxides First Edition Extenders for Paints - Specifications and Methods of Test - Part 17: Precipitated Calcium Silicate First Edition Extenders for Paints - Specifications and Methods of Test - Part 18: Precipitated Sodium Aluminium Silicate First Edition Extenders for Paints - Specifications and Methods of Test - Part 19: Precipitated Silica First Edition Extenders for Paints - Specifications and Methods of Test - Part 20: Fumed Silica First Edition Extenders for Paints - Specifications and Methods of Test - Part 21: Silica Sand (Unground Natural Quartz ) First Edition Extenders for Paints - Specifications and Methods of Test - Part 22: Flex-Calcined Kieselguhr First Edition; Together with ISO 3262 Parts 1-21, Supersedes ISO 3262:1975 Continuous Mechanical Handling Equipment for Loose Bulk Materials - Wagon Tipplers Handling Rail-Borne Wagons (Rotary, Side Discharge and End Discharge) - Safety Code First Edition Eyebolts for General Lifting Purposes First Edition Road Vehicles - Headlamp Cleaners Second Edition Fasteners - Acceptance Inspection Third Edition Paints and Varnishes and Their Raw Materials - Temperatures and Humidities for Conditioning and Testing Third Edition Iron Ores - Determination of Tumble Strength Third Edition Microfilming of Technical Drawings and Other Drawing Office Documents - Part 1: Operating Procedures Second Edition Microfilming of Technical Drawings and Other Drawing Office Documents - Part 2: Quality Criteria and Control of 35 mm Silver Gelatin Microfilms Second Edition

ISO

3272-3

Microfilming of Technical Drawings and Other Drawing Office Documents - Part 3: Aperture Card for 35 mm Microfilm Second Edition

ISO

3272-4

ISO

3274

ISO ISO

3275 3282

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

3284 3285 3286 3287 3290 3291 3292 3293 3294 3295 3297 3298 3299 3301

ISO ISO ISO ISO ISO ISO ISO

3302-1 3302-2 3303 3304 3305 3306 3308

ISO ISO ISO ISO ISO

6330-99 3310-2 3310-3 3312 3314

Microfilming of Technical Drawings and Other Drawing Office Documents - Part 4: Microfilming of Drawings of Special and Exceptional Elongated Sizes First Edition Geometrical Products Specifications (GPS) - Surface Texture: Profile Method - Nominal Characteristics of Contact (Stylus) Instruments Second Edition; Technical Corrigendum 1-1998 Information Processing - Implementation of the 7-Bit Coded Character Set and Its 7-Bit and 8-Bit Extensions on 3,81 mm Magnetic Tape Cassette for Data Interchange First Edition Aircraft - Dimensions for Single-Hole and Triple-Hole Mounting (Class 3) Lever-Operated Manual Switches First Edition Continuous Mechanical Handling Equipment for Loose Bulk Materials - Dimensions of Bends for Use in Pneumatic Handling First Edition Road Vehicles - Ignition Coil Mounting Brackets Second Edition Single Point Cutting Tools - Corner Radii First Edition Powered Industrial Trucks - Symbols for Operator Controls and Other Displays Second Edition Rolling Bearings - Balls - Dimensions and Tolerances Third Edition [Replaced: ABMA 3290] Extra-Long Morse Taper Shank Twist Drills Second Edition Extra Long Parallel Shank Twist Drills Second Edition Morse Taper Shank Countersinks for Angles 60 Degrees, 90 Degrees and 120 Degrees Inclusive First Edition Parallel Shank Countersinks for Angles 60 Degrees, 90 Degrees and 120 Degrees Inclusive First Edition Narrow Bandsaw Blades for Woodworking - Dimensions First Edition Information and Documentation - International Standard Serial Number (ISSN) Fourth Edition Photography - Processing Chemicals - Specifications for Glacial Acetic Acid Second Edition Photography - Processing Chemicals - Specifications for 1-Phenyl-3- Pyrazolidinone Second Edition Statistical Interpretation of Data - Comparison of Two Means in the Case of Paired Observations First Edition Rubber - Tolerances for Products - Part 1: Dimensional Tolerances First Edition; Cancels and Replaces 3302: 1990; Amendment 1:06-01-2001 Rubber - Tolerances for Products - Part 2: Geometrical Tolerances First Edition Rubber- or Plastics-Coated Fabrics - Determination of Bursting Strength Second Edition Plain End Seamless Precision Steel Tubes - Technical Conditions for Delivery Second Edition Plain End Welded Precision Steel Tubes - Technical Conditions for Delivery Second Edition Plain End As-Welded and Sized Precision Steel Tubes - Technical Conditions for Delivery Second Edition Routine Analytical Cigarette-Smoking Machine - Definitions and Standard Conditions Fourth Edition Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth Fourth Edition; Technical Corrigendum 1:9/1/2004 Test Sieves - Technical Requirements and Testing - Part 2: Test Sieves of Perforated Metal Plate Fourth Edition Test Sieves - Technical Requirements and Testing - Part 3: Test Sieves of Electroformed Sheets First Edition Sintered Metal Materials and Hardmetals - Determination of Young Modulus Second Edition; (CEN EN 23312: 1993) Shell Drills with Taper Bore (Taper Bore 1 : 30 (Included)) with Slot Drive First Edition

ISO

3315

ISO ISO

3316 3317

ISO ISO ISO ISO ISO ISO

3318 3320 3321 3323 3324-1 3324-2

ISO ISO ISO

3325 3326 3327

ISO ISO ISO ISO ISO ISO

3332 3334 3337 3338-1 3338-2 3338-3

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

3339-0 3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350

Assembly Tools for Screws and Nuts - Driving Parts for Hand-Operated Square Drive Socket Wrenches - Dimensions and Tests Third Edition Assembly Tools for Screws and Nuts - Attachments for Hand-Operated Square Drive Socket Wrenches - Dimensions and Tests Third Edition Assembly Tools for Screws and Nuts - Square Drive Extension Hexagon Insert, for Power Socket Wrenches First Edition Assembly Tools for Screws and Nuts - Double-Headed Open-Ended Wrenches, Double-Headed Ring Wrenches and Combination Wrenches - Maximum Widths of Heads Third Edition Fluid Power Systems and Components - Cylinder Bores and Piston Rod Diameters - Metric Series Second Edition Fluid Power Systems and Components - Cylinder Bores and Piston Rod Diameters - Inch Series First Edition Aircraft - Hydraulic Components - Marking to Indicate Fluid for Which Component is Approved Second Edition Aircraft Tyres and Rims - Part 1: Specifications Fourth Edition; Corrected and Reprinted 09/15/1998 Aircraft Tyres and Rims - Part 2: Test Methods for Tyres Second Edition; Corrected and Reprinted 02/01/1999 Sintered Metal Materials, Excluding Hardmetals - Determination of Transverse Rupture Strength Second Edition; Amendment 1 02/01/2001 Hardmetals - Determination of (the Magnetization) Coercivity First Edition; (CEN EN 23326: 1993) Hardmetals - Determination of Transverse Rupture Strength Second Edition; (CEN EN 23327: 1993) Ammonium Sulphate for Industrial Use - Determination of Ammoniacal Nitrogen Content - Titrimetric Method After Distillation First Edition Micrographics ISO resolution test chart No. 2 Description and use Third Edition T-Slot Cutters with Cylindrical Shanks and with Morse Taper Shanks Having Tapped Hole Cylindrical Shanks for Milling Cutters - Part 1: Dimensional Characteristics of Plain Cylindrical Shanks Fourth Edition Cylindrical shanks for milling cutters ù Part 2: Dimensional characteristics of flatted cylindrical shanks Sixth edition Cylindrical Shanks for Milling Cutters - Part 3: Dimensional Characteristics of Threaded Shanks First Edition Tractors and Machinery for Agriculture and Forestry - Classification and Terminology - Part 0: Classification System and Classification Second Edition Fibre Building Boards - Determination of Sand Content First Edition Textile Glass - Yarns - Determination of Breaking Force and Breaking Elongation Third Edition Textile Glass - Mats - Determination of Tensile Breaking Force Third Edition Textile Glass - Yarns - Determination of Twist Balance Index Second Edition Reinforcement Products - Determination of Moisture Content Second Edition Wood - Determination of Ultimate Tensile Stress Parallel to Grain First Edition Wood - Determination of Ultimate Tensile Stress Perpendicular to Grain First Edition Wood - Determination of Ultimate Shearing Stress Parallel to Grain First Edition; (PNS 970: 1989) Wood - Determination of Impact Bending Strength First Edition Wood - Determination of Modulus of Elasticity in Static Bending First Edition; (PNS 971: 1989) Wood - Determination of Static Hardness First Edition

ISO ISO ISO

3351 3353-1 3353-2

Wood - Determination of Resistance to Impact Indentation First Edition Aerospace - Lead and Runout Threads - Part 1: Rolled External Threads First Edition; Replaces ISO 3353 Aerospace - Lead and Runout Threads - Part 2: Internal Threads First Edition; Replaces ISO 3353 Milk and Dried Milk, Buttermilk and Buttermilk Powder, Whey and Whey Powder - Determination of Phosphatase Activity (Reference Method) First Edition Sodium Tripolyphosphate and Sodium Pyrophosphate for Industrial Use - Determination of Total Phosphorus (V) Oxide Content Quinoline Phosphomolybdate Gravimetric Method First Edition Phosphoric Acid and Sodium Phosphates for Industrial Use (Including Foodstuffs) - Determination of Fluorine Content - Alizarin Complexone and Lanthanum Nitrate Photometric Method First Edition Fluorochlorinated Hydrocarbons for Industrial Use - Determination of Acidity - Titrimetric Method First Edition Indexable Hardmetal (Carbide) Inserts with Rounded Corners, with Cylindrical Fixing Hole - Dimensions Third Edition Indexable Hardmetal (Carbide) Inserts with Wiper Edges, without Fixing Hole - Dimensions Second Edition Coated Abrasives - Abrasive Rolls Second Edition Impermeable sintered metal materials and hardmetals Determination of density Second Edition Modular Units for Machine Tool Construction - Rotary Tables and Multi-Sided Centre Bases for Rotary Tables First Edition Reinforcement Products - Mats and Fabrics - Determination of Mass per Unit Area Third Edition Textile Glass - Determination of Stiffness of Rovings First Edition

ISO

3356

ISO

3357

ISO ISO ISO ISO ISO ISO ISO ISO ISO

3360 3363 3364 3365 3366 3369 3371 3374 3375

ISO ISO ISO

3376 3377-1 3377-2

ISO ISO

3378 3379

Leather Physical and mechanical tests Determination of tensile strength and percentage extension Second Edition; IULTCS/IUP 6 Leather Physical and mechanical tests Determination of tear load part 1: Single edge tear First Edition; IULTCS/IUP 40 Leather Physical and mechanical tests Determination of tear load Part 2: Double edge tear First Edition; IULTCS/IUP 8 Leather Physical and mechanical tests Determination of resistance to grain cracking and grain crack index Second Edition; IULTCS/IUP 12 Leather - Determination of Distension and Strength of Grain - Ball Burst Test First Edition; (PNS 976: 1986)

ISO ISO

3380 3381

Leather Physical and mechanical tests Determination of shrinkage temperature up to 100 ░C Second Edition; IULTCS/IUP 16 Railway applications Acoustics Measurement of noise inside railbound vehicles Second Edition

ISO

3382

ISO

3384

Acoustics - Measurement of the Reverberation Time of Rooms with Reference to other Acoustical Parameters Second Edition Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures Fifth Edition

ISO

3385

ISO

3386-1

Flexible Cellular Polymeric Materials - Determination of Fatigue by Constant-Load Pounding Third Edition; (CEN EN ISO 3385: 1995) Polymeric Materials, Cellular Flexible - Determination of Stress-Strain Characteristic in Compression - Part 1: Low-Density Materials Second Edition

ISO

3386-2

ISO ISO

3387 3389

ISO ISO

3390 3391

ISO ISO ISO ISO ISO ISO ISO ISO ISO

3393 3394 3397 3398 3399 3400 3401 3402 3405

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

3407 3408-1 3408-2 3408-3 3408-4 3408-5 3409 3410 3411 3412

ISO

3415

ISO ISO ISO ISO

3416 3417 3419 3423

Flexible Cellular Polymeric Materials - Determination of Stress-Strain Characteristics in Compression - Part 2: High-Density Materials Second Edition Rubber - Determination of Crystallization Effects by Hardness Measurements Second Edition; Technical Corrigendum 1: 2000 Aircraft - Radio Frequency Flexible Coaxial Cables - Dimensions and Electrical Characteristics First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Manganese Content - Flame Atomic Absorption Method First Edition Cryolite, Natural and Artificial - Determination of Calcium Content - Flame Atomic Absorption Method First Edition Cryolite, Natural and Artificial, and Aluminium Fluoride for Industrial Use - Determination of Moisture Content - Gravimetric Method First Edition Dimensions of Rigid Rectangular Packages - Transport Packages Second Edition Broadleaved Wood Raw Parquet Blocks - General Characteristics First Edition Broadleaved Wood Raw Parquet Blocks - Classification of Oak Parquet Blocks First Edition Broadleaved Wood Raw Parquet Blocks - Classification of Beech Parquet Blocks First Edition Cigarettes - Determination of Alkaloids in Smoke Condensates - Spectrometric Method Third Edition Cigarettes - Determination of Alkaloid Retention by the Filters - Spectrometric Method Second Edition Tobacco and Tobacco Products - Atmosphere for Conditioning and Testing Fourth Edition Petroleum Products - Determination of Distillation Characteristics at Atmospheric Pressure Third Edition Information Processing - Information Interchange on 3,81 mm (0.150 in) Magnetic Tape Cassette at 4 cpmm (100 cpi), Phase Encoded at 63 ftpmm (1 600 ftpi) Second Edition Ball screws Part 1: Vocabulary and designation Vis Ó billes Partie 1: Vocabulaire et dÚsignation Second Edition Ball Screws - Part 2: Nominal Diameters and Nominal Leads - Metric Series First Edition; Ball screws Part 3: Acceptance conditions and acceptance tests Second Edition Ball screws Part 4: Static axial rigidity First Edition Ball screws Part 5: Static and dynamic axial load ratings and operational life First Edition Passenger Cars - Lateral Spacing of Foot Controls First Edition Agricultural Machinery - Endless Variable-Speed V-Belts and Groove Sections of Corresponding Pulleys Second Edition Earth-moving machinery ù Physical dimensions of operators and minimum operator space envelope Fourth Edition Road Vehicles - Screened and Waterproof Spark- Plugs and Their Connections - Types 1A and 1B Third Edition Textile Floor Coverings - Determination of Thickness Loss After Brief, Moderate Static Loading Second Edition (AS/NZS 2111.13: 1996) Textile Floor Coverings - Determination of Thickness Loss After Prolonged, Heavy Static Loading Second Edition (AS/NZS 2111.14: 1996) [Superseded By: JSA JIS L 1021-6] Rubber - Measurement of Vulcanization Characteristics with the Oscillating Disc Curemeter Second Edition Non-Alloy and Alloy Steel Butt-Welding Fittings Second Edition; (Erratum-1982) Sulphuric Acid and Oleums for Industrial Use - Determination of Sulphur Dioxide Content - Iodometric Method First Edition

ISO ISO ISO ISO

3425 3426 3427 3428

ISO

3429

ISO

3430

ISO ISO ISO

3431 3432 3433

ISO ISO ISO ISO

3434 3435 3438 3439

ISO

3442-1

ISO

3442-2

ISO ISO

3442-3 3443-1

ISO ISO

3443-2 3443-3

Sulphur for Industrial Use - Determination of Ash at 850-900 Degrees Celsius and of Residue at 200 Degrees Celsius First Edition Sulphur for Industrial Use-Determination of Loss in Mass at 80 Degree Celsius First Edition Gaseous Halogenated Hydrocarbons (Liquefied Gases) - Taking of a Sample First Edition Sodium Fluoride for Industrial Use - Preparation and Storage of Test Samples First Edition Sodium Fluoride Primarily Used for the Production of Aluminium - Determination of Iron Content - 1,10- 1,10-Phenanthroline Photometric Method First Edition Sodium Fluoride Primarily Used for the Production of Aluminium - Determination of Silica Content - Reduced Molybdosilicate Spectrophotometric Method First Edition Sodium Fluoride Primarily Used for the Production of Aluminium - Determination of Soluble Sulphates Content - Turbidimetric Method First Edition Cheese - Determination of Fat Content - Butyrometer for Van Gulik Method First Edition Cheese - Determination of Fat Content - Van Gulik Method First Edition Shipbuilding and Marine Structures - Heated Glass Panes for Ships┤ Rectangular Windows Second Edition; Amendment 1: 7/01/2004 Continuous Mechanical Handling Equipment - Classification and Symbolization of Bulk Materials First Edition Subland Twist Drills with Morse Taper Shanks for Holes Prior to Tapping Screw Threads Second Edition Subland Twist Drills with Cylindrical Shanks for Holes Prior to Tapping Screw Threads Second Edition Machine tools Dimensions and geometric tests for self-centring chucks with two-piece jaws Part 1: Manually operated chucks with tongue and groove type jaws First Edition; Replaces ISO 3442 and ISO 9401 Machine tools Dimensions and geometric tests for self-centring chucks with two-piece jaws Part 2: Power-operated chucks with tongue and groove type jaws First Edition; Replaces ISO 3442 and ISO 9401 Machine tools ù Dimensions and geometric tests for self-centring chucks with two-piece jaws ù Part 3: Power-operated chucks with serrated jaws First Edition [Replaced: ISO 3442, ISO 9401] Tolerances for Building - Part 1: Basic Principles for Evaluation and Specification First Edition Tolerances for Building - Part II: Statistical Basis for Predicting Fit Between Components Having a Normal Distribution of Sizes First Edition Tolerances for Building - Part 3: Procedures for Selecting Target Size and Predicting Fit First Edition

ISO

3443-4

Tolerances for Building - Part 4: Method for Predicting Deviations of Assemblies and for Allocation of Tolerances First Edition

ISO

3443-5

ISO

3443-6

ISO

3443-7

Building Construction - Tolerances for Building - Part 5: Series of Values to Be Used for Specification of Tolerances First Edition Tolerances for Building - Part 6: General Principles for Approval Criteria, Control of Conformity with Dimensional Tolerance Specifications and Statistical Control - Method 1 First Edition Tolerances for Building - Part 7: General Principles for Approval Criteria, Control of Conformity with Dimensional Tolerance Specifications and Statistical Control - Method 2 (Statistical Control Method) First Edition

ISO ISO ISO ISO

3443-8 3447 3448 3449

ISO ISO ISO ISO ISO ISO ISO ISO

3450 3451-1 3451-2 3451-3 3451-4 3451-5 3452 3452-2

ISO

3452-3

ISO ISO ISO ISO ISO ISO

3452-4 3453 3454 3455 3456 3457

ISO

3458

ISO

3459

ISO

3460

ISO ISO ISO ISO ISO ISO ISO

3463 3465 3466 3467 3468 3469 3470

Tolerances for Building - Part 8: Dimensional Inspection and Control of Construction Work First Edition Joints in Building - General Check-List of Joint Functions First Edition Industrial Liquid Lubricants - ISO Viscosity Classification Second Edition Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements Fifth Edition Earth-Moving Machinery - Braking Systems of Rubber-Tyred Machines - Systems and Performance Requirements and Test Procedures Third Edition Plastics - Determination of Ash - Part 1: General Methods Third Edition Plastics - Determination of Ash - Part 2: Poly(Alkylene Terephthalate) Materials Second Edition Plastics - Determination of Ash - Part 3: Unplasticized Cellulose Acetate First Edition Plastics - Determination of Ash - Part 4: Polyamides Second Edition Plastics - Determination of Ash - Part 5: Poly(Vinyl Chloride) Second Edition Non-Destructive Testing - Penetrant Inspection - General Principles First Edition Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Second Edition; Non-Destructive Testing - Penetrant Testing - Part 3: Reference Test Blocks First Edition; Together with ISO 3452-1, ISO 3452-2 and ISO 3452-4 Cancels and Replaces ISO 3452:1984 Non-Destructive Testing - Penetrant Testing - Part 4: Equipment First Edition; Together with ISO 3452-1, ISO 3452-2 and ISO 3452-3 Cancels and Replaces ISO 3452:1984 Non-Destructive Testing - Liquid Penetrant Inspection - Means of Verification First Edition Liquid Flow Measurement in Open Channels - Direct Depth Sounding and Suspension Equipment Second Edition Hydrometry ù Calibration of currentmeters in straight open tanks Second Edition Aircraft - Lever-Operated Manual Switches (Class 3) - Performance Requirements First Edition Earth-Moving Machinery - Guards - Definitions and Requirements Fourth Edition Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes - Test of Leakproofness Under Internal Pressure First Edition Polyethylene (PE) Pressure Pipes - Joints Assembled with Mechanical Fittings - Internal Under-Pressure Test Method and Requirement First Edition Unplasticized Polyvinyl Chloride (PVC) Pressure Pipes - Metric Series - Dimensions of Adapter for Backing Flange First Edition Tractors for agriculture and forestry ù Roll-over protective structures (ROPS) ù Dynamic test method and acceptance conditions Fourth edition Hand Taper Pin Reamers First Edition Machine Taper Pin Reamers with Parallel Shanks First Edition Machine Taper Pin Reamers with Morse Taper Shanks First Edition Passenger Cars - Windscreen Defrosting Systems - Test Method Second Edition Passenger Cars - Windscreen Washing Systems - Test Methods Second Edition; Amendment 1: 07/15/2006 Passenger Cars - Windscreen Demisting Systems - Test Method Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO

3471 3475 3476 3493 3494 3496 3497 3500 3501

ISO

3503

ISO ISO ISO

3505 3506-1 3506-2

ISO ISO ISO ISO ISO

3506-3 3506-4 3507 3508 3509

ISO

3511-I

ISO

3511-2

ISO

3511-3

ISO ISO ISO ISO ISO ISO ISO

3511-4 3512 3513 3514 3515 CORR 1 3515 3516

Earth-Moving Machinery - Roll-Over Protective Structures - Laboratory Tests and Performance Requirements First Edition; Amendment 1-1997; Technical Corrigendum 1 12/01/2000 Oil of Aniseed (Pimpinella Anisum L.) Second Edition Modular Units for Machine Tool Construction - Tenon Drive and Flanges for Mounting Multi-Spindle Heads First Edition Vanilla - Vocabulary Vanille - Vocabulaire Second Edition Statistical Interpretation of Data - Power of Tests Relating to Means and Variances First Edition Meat and Meat Products - Determination of Hydroxyproline Content Second Edition Metallic Coatings - Measurement of Coating Thickness - X-Ray Spectrometric Methods Third Edition Gas cylinders Seamless steel CO2 cylinders for fixed fire-fighting installations on ships Third Edition Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes - Test of Resistance to Pull out First Edition Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes - Test of Leakproofness Under Internal Pressure When Subjected to Bending First Edition Ropes and Cordage - Equivalence Between Natural Fibre Ropes and Man-Made Fibre Ropes for Use in the Mooring of Vessels First Edition Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 1: Bolts, Screws and Studs First Edition Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 2: Nuts First Edition Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 3: Set Screws and Similar Fasteners Not Under Tensile Stress First Edition Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 4: Tapping Screws First Edition Laboratory Glassware - Pyknometers Second Edition Thread Run-Outs for Fasteners with Thread in Accordance with ISO 261 and ISO 262 First Edition Coffee and coffee products Vocabulary CafÚs et dÚrivÚs Vocabulaire Fourth Edition Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part I: Basic Requirements First Edition Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic Requirements First Edition Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection Diagrams First Edition Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols for Process Computer, Interface, and Shared Display/Control Functions First Edition Heavy-Duty Cranked-Link Transmission Chains Second Edition Chillies - Determination of Scoville Index Second Edition Chlorinated Polyvinyl Chloride (CPVC) Pipes and Fittings - Specification and Determination of Density First Edition Oil of Lavender (Lavandula Angustifolia Mill.) TECHNICAL CORRIGENDUM 1 Third Edition Oil of Lavender (Lavandula Angustifolia Mill.) Third Edition Oil of Coriander Fruits (Coriandrum Sativum L.) Second Edition

ISO ISO ISO

3517 3518 3519

ISO

3520

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

3521 3522 3523 3524 3525 3526 3527 3528 3529-1 3529-2 3529-3 3530 3534-1

ISO

3534-2

ISO ISO

3534-3 3535

ISO ISO ISO

3536 3537 3538

ISO ISO

3539 3540

ISO

3543

ISO ISO

3545-1 3545-2

Oil of Neroli (Citrus Aurantium L. ssp. Aurantium syn. Citrus Aurantium L. ssp. Amara var. Pumilia) Second Edition Oil of Sandalwood (Santalum album L.) Second Edition Oil of lime distilled, Mexican type [Citrus aurantifolia (Christm.) Swingle] Third Edition Oil of Bergamot [Citrus Aurantium L. Subsp. Bergamia (Wight et Arnott) Engler], Italian Type Second Edition; Corrigendum 1: 1/15/2002 Plastics - Unsaturated Polyester and Epoxy Resins - Determination of Overall Volume Shrinkage Second Edition; Technical Corrigendum 1: 2/15/2003 Aluminium and aluminium alloys Castings - Chemical composition and mechanical properties Third Edition Oil of Cananga [Cananga Odorata (Lam.) Hook. F. Et Thomson, Forma Macrophylla] Second Edition Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume) Second Edition Oil of Amyris First Edition Oil of sage, Spanish (Salvia lavandulifolia Vahl) Third Edition Oil of Parsley Fruits (Petroselinum Sativum Hoffm.) Second Edition Oil of Mandarin, Italian Type (Citrus Reticulata Blanco) Second Edition; Corrigendum 1-1998 Vacuum Technology - Vocabulary - Part 1: General Terms First Edition Vacuum Technology - Vocabulary - Part 2: Vacuum Pumps and Related Terms First Edition Vacuum Technology - Vocabulary - Part 3: Vacuum Gauges First Edition Vacuum Technology - Mass Spectrometer-Type Leak-Detector Calibration First Edition Statistics Vocabulary and symbols Part 1: General statistical terms and terms used in probability Second Edition Statistics Vocabulary and symbols Part 2: Applied statistics Statistique Vocabulaire et symboles Partie 2: Statistique appliquÚe Second Edition Statistics - Vocabulary and Symbols - Part 3: Design of Experiments Statistique - Vocabulaire Et Symboles - Partie 3: Plans D'Experience Second Edition Forms Design Sheet and Layout Chart First Edition Road Vehicles - Safety Glazing Materials - Vocabulary Vehicules Routiers - Vitrages De Securite - Vocabulaire Second Edition Road Vehicles - Safety Glazing Materials - Mechanical Tests Third Edition Road Vehicles - Safety Glazing Materials - Test Methods for Optical Properties Second Edition Road Vehicles - Injection Nozzle Holder with Body, Types 8 and 10, and Injection Nozzle Holder with Fixing Flats, Types 9 and 11 First Edition Paper or Plastic Printing Ribbons - Characteristics of Cores First Edition Metallic and Non-Metallic Coatings - Measurement of Thickness - Beta Backscatter Method Second Edition; TECHNICAL CORRIGENDUM 1: 12/01/2003 Steel Tubes and Fittings - Symbols for Use in Specifications - Part 1: Tubes and Tubular Accessories with Circular Cross-Section First Edition Steel Tubes and Fittings - Symbols for Use in Specifications - Part 2: Square and Rectangular Hollow Sections First Edition

ISO ISO ISO ISO ISO ISO

3545-3 3546 3547-1 3547-2 3547-3 3547-4

ISO ISO

3548 3549

ISO

3550-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

3550-2 3551-1 3551-2 3552-1 3552-2 3553-1 3553-2 3559 3560 3561

ISO ISO ISO

3562 3563 3564

ISO ISO ISO ISO ISO ISO

3566 3569 3572 3573 3574 3575

ISO

3580

Steel Tubes and Fittings - Symbols for Use in Specifications - Part 3: Tubular Fittings with Circular Cross-Section First Edition Fibre Building Boards - Determination of Surface Finish (Roughness) First Edition Plain bearings Wrapped bushes Part 1: Dimensions Second Edition Plain bearings Wrapped bushes Part 2: Test data for outside and inside diameters Second Edition Plain bearings Wrapped bushes Part 3: Lubrication holes, grooves and indentations Second Edition Plain Bearings - Wrapped Bushes - Part 4: Materials Second Edition Plain Bearings - Thin-Walled Half Bearings with or without Flange - Tolerances, Design Features and Methods of Test Second Edition Zinc Dust Pigments for Paints - Specifications and Test Methods Second Edition Cigarettes - Determination of Loss of Tobacco from the Ends - Part 1: Method Using a Rotating Cylindrical Cage First Edition Cigarettes - Determination of Loss of Tobacco from the Ends - Part 2: Method Using a Rotating Cubic Box (Sismelatophore) First Edition Rotary Core Diamond Drilling Equipment - System A - Part 1: Metric Units First Edition Rotary Core Diamond Drilling Equipment - System A - Part 2: Inch Units First Edition Rotary Core Diamond Drilling Equipment - System B - Part 1: Metric Units First Edition Rotary Core Diamond Drilling Equipment - System B - Part 2: Inch Units First Edition Road Vehicles - High-Tension Connections for Ignition Coils and Distributors - Part 1: Socket-Type First Edition Road Vehicles - High-Tension Connectors for Ignition Coils and Distributors - Part 2: Plug-Type Second Edition Road Vehicles - Working Voltages for Lights Fitted to Motor Vehicles and to Their Trailers First Edition Road Vehicles - Frontal Fixed Barrier or Pole Impact Test Procedure Second Edition Information Processing - Interchangeable Magnetic Six-Disk Pack - Track Format First Edition Information Processing - Interchangeable Magnetic Single Disk Cartridge (Top Loaded) - Physical and Magnetic Characteristics First Edition Information Processing - Interchangeable Magnetic Single-Disk Cartridge (Top Loaded) - Track Format First Edition Information Processing - Interchangeable Magnetic Eleven-Disk Pack - Physical and Magnetic Characteristics First Edition Sodium Fluoride Primarily Used for the Production of Aluminium - Determination of Chlorides Content - Turbidimetric Method First Edition Continuous Mechanical Handling Equipment - Classification of Unit Loads First Edition Textiles - Weaves - Definitions of General Terms and Basic Weaves First Edition Hot-Rolled Carbon Steel Sheet of Commercial and Drawing Qualities Third Edition Cold-Reduced Carbon Steel Sheet of Commercial and Drawing Qualities Third Edition Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities Third Edition Covered Electrodes for Manual Arc Welding of Welding consumables Covered electrodes for manual metal arc welding of creepresisting steels Classification Second Edition

ISO

3581

ISO

3582 AMD 1

ISO ISO ISO ISO ISO

3582 3583 3584 3585 3586

ISO

3587

ISO ISO ISO ISO ISO ISO ISO

3588 3589 3590 3591 3593 3594 3595

ISO

3596

ISO

18609

ISO

3597-1

ISO

3597-2

ISO

3597-3

ISO ISO ISO

3597-4 3598 3599

ISO

3600

Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of Stainless and Heat-Resisting Steels - Classification Second Edition Flexible cellular polymeric materials ù Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame AMENDMENT 1 Second Edition Flexible Cellular Polymeric Materials - Laboratory Assessment of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame Second Edition Road Vehicles - Pressure Test Connection for Compressed-Air Pneumatic Braking Equipment Third Edition Road Vehicles - Drawbar Couplings - Interchangeability Second Edition Borosilicate Glass 3.3 - Properties Third Edition Glass Plant, Pipeline and Fittings - General Rules for Testing, Handling and Use First Edition Glass Plant, Pipeline and Fittings - Pipeline and Fittings of Nominal Bore 15 to 150 mm - Compatibility and Interchangeability First Edition; (Erratum-1979) Spices and Condiments - Determination of Degree of Fineness of Grinding - Hand Sieving Method (Reference Method) First Edition Modular Units for Machine Tool Construction - Integral Way Columns First Edition; Amendment 1: 1982 Modular units for machine tool construction - Spindle Units First Edition Sensory Analysis - Apparatus - Wine-Tasting Glass First Edition Starch - Determination of Ash Second Edition; (CEN EN ISO 3593: 1981) Milk Fat - Detection of Vegetable Fat by Gas-Liquid Chromatography of Sterols (Reference Method) First Edition Milk Fat - Detection of Vegetable Fat by the Phytosteryl Acetate Test First Edition Animal and Vegetable Fats and Oils - Determination of Unsaponifiable Matter - Method Using Diethyl Ether Extraction First Edition; Cancels and Replaces ISO 3596-1:1988 and its Amendment 1:1997 Animal and Vegetable Fats and Oils - Determination of Unsaponifiable Matter - Method Using Hexane Extraction First Edition [Superseded: ISO 3596-2] Textile-Glass-Reinforced Plastics - Determination of Mechanical Properties on Rods Made of Roving-Reinforced Resin - Part 1: General Considerations and Preparation of Rods Second Edition Textile-Glass-Reinforced Plastics - Determination of Mechanical Properties on Rods Made of Roving-Reinforced Resin - Part 2: Determination of Flexural Strength Second Edition Textile-Glass-Reinforced Plastics - Determination of Mechanical Properties on Rods Made of Roving-Reinforced Resin - Part 3: Determination of Compressive Strength Second Edition Textile-Glass-Reinforced Plastics - Determination of Mechanical Properties on Rods Made of Roving-Reinforced Resin - Part 4: Determination of Apparent Interlaminar Shear Strength Second Edition Textile Glass - Yarns - Basis for a Specification Second Edition Vernier callipers reading to 0,l and 0,05 mm First Edition Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Operator┤s Manuals - Content and Presentation Third Edition

ISO ISO ISO ISO

3601-1 3601-3 3601-5 3602

ISO

3603

ISO ISO ISO

3604 3610 3611

ISO

3613

ISO ISO ISO ISO

3616 3617 3618 3619

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

3620 3621 3622 3623 3624 3625 3626 3627 3628 3629

ISO ISO ISO ISO

3630-1 3630-2 3630-3 3631

ISO

3633

Fluid Power Systems - O-rings - Part 1: Inside Diameters, Cross-Sections, Tolerances and Size Identification Code Third Edition Fluid power systems O-rings Part 3: Quality acceptance criteria Second Edition Fluid Power Systems - O-Rings - Part 5: Suitability of Elastomeric Materials for Industrial Applications First Edition Documentation - Romanization of Japanese (Kana Script) First Edition Fittings for Unplasticized Polyvinyl Chloride (PVC) Pressure Pipes with Elastic Sealing Ring Type Joints - Pressure Test for Leakproofness First Edition Fitting for Unplasticized Polyvinyl Chloride (PVC) Pressure Pipes with Elastic Sealing Ring Type Joints - Pressure Test for Leakproofness Under Conditions of External Hydraulic Pressure First Edition Modular units for machine tool construction - Support brackets First Edition Micrometer Callipers for External Measurement First Edition Chromate Conversion Coatings on Zinc,Cadmium, Aluminium-Zinc Alloys and Zinc-Aluminium Alloys - Test Methods Second Edition Textile Glass - Chopped-Strand and Continuous-Filament Mats - Determination of Average Thickness, Thickness Under Load and Recovery After Compression Second Edition Photography - Processing Chemicals - Specifications for Sodium Hydroxide Second Edition Photography - Processing Chemicals - Specifications for Benzotriazole Second Edition Photography - Processing Chemicals - Specifications for Ammonium Thiosulfate Solution Second Edition Photography - Processing Chemicals - Specifications for Aluminium Potassium Sulfate Second Edition; (Corrected and Reprinted 1995) Photography - Processing Chemicals - Specifications for Sodium Tetraborate Decahydrate Second Edition Photography - Processing Chemicals - Specifications for Ammonium Thiocyanate Second Edition Photography - Processing Chemicals - Specifications for Anhydrous Potassium Carbonate Second Edition Photography - Processing Chemicals - Specifications for Potassium Ferricyanide Second Edition Photography - Processing Chemicals - Specifications for Potassium Hydroxide Second Edition Photography - Processing Chemicals - Specifications for Potassium Thiocyanate Second Edition Photography - Processing Chemicals - Specifications for Anhydrous Sodium Metabisulfite Third Edition Photography - Processing Chemicals - Specifications for Boric Acid, Granular Second Edition Photography - Processing Chemicals - Specifications for Potassium Metabisulfite Third Edition Dental Root-Canal Instruments - Part 1: Files, Reamers, Barbed Broaches, Rasps, Paste Carriers, Explorers and Cotton Broaches First Edition; (CEN EN ISO 3630-1: 1994) (CAN/CSA-Z349.48.2-94) Dental Root Canal Instruments - Part 2: Enlargers Second Edition Dental Root-Canal Instruments - Part 3: Condensers, Pluggers and Spreaders First Edition Citrus Fruits - Guide to Storage First Edition Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC-U) Second Edition

ISO ISO ISO ISO ISO

3634 3635 3636 3637 3638

Vegetable Products - Determination of Chloride Content First Edition Size Designation of Clothes - Definitions and Body Measurement Procedure Third Edition Size Designation of Clothes - Men┤s and Boys┤ Outerwear Garments First Edition; Erratum: 1978; Corrigendum 1: 1990 Size Designation of Clothes - Womens┤ and Girls┤ Outerwear Garments First Edition; Corrigendum 1: 1990 Size Designation of Clothes - Infants┤ Garments First Edition Cinematography - Projection Reels/Spools 75 to 312 mm Diameter for 8 mm Type S Motion-Picture Film - Dimensions and Specifications First Edition Cinematography - Motion-Picture Prints and Sound Records for International Exchange of Television Programmes - Specifications Second Edition Cinematography - Motion-Picture Camera Cartridge 8 mm Type S Model II - Cartridge Fit and Take-Up Core Drive - Dimensions and Specifications First Edition

ISO

3639

ISO

3640

ISO

3641

ISO ISO

3642 3644

ISO

3645

ISO ISO ISO ISO ISO

3646 3647 3648 3649 3650

ISO

3651-1

ISO ISO ISO

3651-2 3652 3653

ISO

3655

Determination of Resistance to Intergranular Corrosion of Stainless Steels - Part 1: Austenitic and Ferritic-Austenitic (Duplex) Stainless Steels - Corrosion Test in Nitric Acid Medium by Measurement of Loss in Mass (Huey Test) Second Edition Determination of Resistance to Intergranular Corrosion of Stainless Steels - Part 2: Ferritic, Austenitic and Ferritic-Austenitic (Duplex) Stainless Steels - Corrosion Test in Media Containing Sulfuric Acid Second Edition Shipbuilding - Inland Vessels - Rope Reels First Edition Cinematography - Spindles for 8 mm Type S Motion-Picture Projector Reels/Spools - Dimensions First Edition Acceptance Conditions for Vertical Turning and Boring Lathes with One or Two Columns and a Single Fixed or Movable Table General Introduction and Testing of the Accuracy Second Edition

ISO ISO ISO ISO

3656 3657 3659 3660

Animal and Vegetable Fats and Oils - Determination of Ultraviolet Absorbance Expressed as Specific UV Extinction Third Edition Animal and Vegetable Fats and Oils - Determination of Saponification Value Third Edition Fruit and Vegetables - Ripening After Cold Storage First Edition Fishing Nets - Mounting and Joining of Netting - Terms and Illustrations First Edition

Cinematography - Cemented or Welded Splices on 8 mm Type S Motion-Picture Film for Projector Use - Dimensions Second Edition Cinematography - Spindles for 8 mm Type R Motion-Picture Cameras and Projectors - Dimensions First Edition Cinematography - Image Area Produced by 8 mm Type S Motion-Picture Camera Aperture and Maximum Projectable Image Area Positions and Dimensions Second Edition Cinematography - Motion- Picture Camera Cartridge 8 mm Type S Model II - Slots, Projections and Cartridge Hole for Indicating Film Speed, Colour Balance and Film Identification - Dimensions and Positions First Edition Cinematography - Spindles for 16 mm Motion-Picture Camera Spools and Projector Reels - Dimensions First Edition Aviation Fuels - Estimation of Net Specific Energy Second Edition; Corrigendum 1: 1996 Cleaning Equipment for Air or Other Gases - Vocabulary First Edition Geometrical Product Specifications (GPS) - Length Standards - Gauge Blocks Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO

3661 3662 3663 3664 3665 3668 3669 3671 3672-1

End-Suction Centrifugal Pumps - Baseplate and Installation Dimensions First Edition; (CEN EN 23661: 1993) Hydraulic Fluid Power - Pumps and Motors - Geometric Displacements First Edition Polyethylene (PE) Pressure Pipes and Fittings, Metric Series - Dimensions of Flanges First Edition Viewing Conditions - Graphic Technology and Photography Second Edition Photography - Intra-Oral Dental Radiographic Film - Specification Second Edition Paints and Varnishes - Visual Comparison of the Colour of Paints Second Edition Vacuum Technology - Bakable Flanges - Dimensions First Edition Plastics - Aminoplastic Moulding Materials - Determination of Volatile Matter First Edition Plastics - Unsaturated Polyester Resins (UP-R) - Part 1: Designation System Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

3672-2 3673-1 3673-2 3674 3675 3676 3677 3678 3679 3680 3681 3684 3685

ISO

3686-1

ISO

3686-2

Plastics - Unsaturated Polyester Resins (UP-R) - Part 2: Preparation of Test Specimens and Determination of Properties First Edition Plastics - Epoxy Resins - Part 1: Designation Second Edition Plastics - Epoxy Resins - Part 2: Preparation of Test Specimens and Determination of Properties Second Edition Shipbuilding - Inland Vessels - Deck Rail First Edition Crude Petroleum and Liquid Petroleum Products - Laboratory Determination of Density - Hydrometer Method Third Edition;; Packaging - Unit Load Sizes - Dimensions First Edition Filler Metals for Soft Soldering, Brazing and Braze Welding - Designation Second Edition Paints and Varnishes - Print-Free Test First Edition; (CEN EN ISO 3678: 1995) (PNS 682: 1990) Determination of flash point Rapid equilibrium closed cup method Third Edition Determination of flash/no flash Rapid equilibrium closed cup method Fourth Edition Binders for Paints and Varnishes - Determination of Saponification Value - Titrimetric Method Third Edition Conveyors Belts - Determination of Minimum Pulley Diameters Second Edition Tool-Life Testing with Single-Point Turning Tools Second Edition Test Conditions for High Accuracy Turret and Single Spindle Coorinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle - Testing of the Accuracy - Part 1: Single Column Type Machines First Edition; this First Edition Together with ISO 3686-2 Replaces ISO 3638: 1976 Test Conditions for High Accuracy Turret and Single Spindle Coorinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle - Testing of the Accuracy - Part 2: Portal Type Machines with Moving Table First Edition; this First Edition Together with ISO 3686-1 Replaces ISO 3638: 1976

ISO ISO ISO ISO

3688 3689 3690 3691

ISO

3692

Pulp - Preparation of Laboratory Sheets for the Measurement of Diffuse Blue Reflectance Factor (ISO Brightness) Second Edition Paper and Board - Determination of Bursting Strength After Immersion in Water Second Edition Welding and Allied Processes - Determination of Hydrogen Content in Ferritic Steel Arc Weld Metal Second Edition Powered Industrial Trucks - Safety Code Second Edition; Amendment 1: 1983 Information Processing - Reels and Cores for 25,4 mm (1 in) Perforated Paper Tape for Information Interchange - Dimensions First Edition

ISO ISO ISO ISO

3696 3699 3703 3704

Water for Analytical Laboratory Use - Specification and Test Methods First Edition Anhydrous Hydrogen Fluoride for Industrial Use - Determination of Water Content - Karl Fischer Method First Edition Acid-Grade and Ceramic-Grade Fluorspar - Determination of Flotation Agents Second Edition Sulphur for Industrial Use - Determination of Acidity - Titrimetric Method First Edition

ISO

3705

ISO

3706

ISO

3707

ISO ISO ISO ISO ISO

3711 3713 3714 3715 3715-1

Sulphur for Industrial Use - Determination of Arsenic Content - Silver Diethyldithiocarbamate Photometric Method First Edition Phosphoric Acid for Industrial Use (Including Foodstuffs) - Determination of Total Phosphorus (V) Oxide Content - Quinoline Phosphomolybdate Gravimetric Method First Edition; (Erratum-1978) Phosphoric Acid for Industrial Use (Including Foodstuffs) - Determination of Calcium Content - Flame Atomic Absorption Method First Edition (PNS 855:1989) Lead Chromate Pigments and Lead Chromate- Molybdate Pigments - Specifications and Methods of Test Second Edition; (Corrected and Reprinted - 1991) Ferroalloys - Sampling and Preparation of Samples - General Rules First Edition Oil of Pennyroyal First Edition Shipbuilding - Ship Screw Propellers - List of Equivalent Terms First Edition; Amendment 1: 1986 Ships and Marine Technology - Propulsion Plants for Ships - Part 1: Vocabulary for Geometry of Propellers First Edition

ISO ISO

3715-2 3719

ISO

3720

ISO ISO

3722 3723

ISO ISO

3724 3726

ISO

3727-1

ISO ISO ISO ISO ISO

3727-2 3727-3 3728 3729 3730

Ships and Marine Technology - Propulsion Plants for Ships - Part 2: Vocabulary for Controllable-Pitch Propeller Plants First Edition Mechanical Vibration - Symbols for Balancing Machines and Associated Instrumentation Second Edition Black Tea - Definition and Basic Requirements Third Edition; Technical Corrigendum 1: 2/15/1992; Technical Corrigendum 2: 3/15/2004 Hydraulic Fluid Power - Fluid Sample Containers - Qualifying and Controlling Cleaning Methods First Edition Supersedes NFPA B93.20M Hydraulic Fluid Power - Filter Elements - Method for End Load Test First Edition Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using particulate contaminant Second Edition Instant Coffee - Determination of Loss in Mass at 70 Degrees Celsius Under Reduced Pressure First Edition Butter - Determination of Moisture, Not-Fat Solids and Fat Contents - Part 1: Determination of Moisture Content (Reference Method) First Edition; IDF 80-1; Together With ISO 3727-2 and 3727-3 Cancels and Replaces ISO 3727:1977 Butter - Determination of Moisture, Not-Fat Solids and Fat Contents - Part 2: Determination of Non-Fat Solids Content (Reference Method) First Edition; IDF 80-1; Together With ISO 3727-2 and 3727-3 Cancels and Replaces ISO 3727:1977 Butter - Determination of Moisture, Non-Fat Solids and Fat Contents - Part 3: Calculation of Fat Content First Edition Ice-Cream and Milk Ice - Determination of Total Solids Content (Reference Method) Second Edition Fibre Building Boards - Determination of Surface Stability First Edition Shipbuilding - Mooring Winches Second Edition; (Corrected and Reprinted - 1989)

ISO

3731

ISO ISO ISO ISO ISO ISO

3732 3733 3734 3735 3738-1 3738-2

ISO

3739-1

ISO ISO

3739-2 3739-3

ISO

3740

ISO

3741

ISO

3743-1

ISO

3743-2

ISO

3744

ISO

3745

ISO

3746

ISO ISO ISO ISO ISO ISO ISO

3747 3750 3754 3755 3756 3757 3758

Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage Fourth Edition Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage Fourth Edition Petroleum Products and Bituminous Materials - Determination of Water - Distillation Method Second Edition Petroleum Products - Determination of Water and Sediment in Residual Fuel Oils - Centrifuge Method Second Edition Crude Petroleum and Fuel Oils - Determination of Sediment - Extraction Method Second Edition Hardmetals - Rockwell Hardness Test (Scale A) - Part 1: Test Method First Edition Hardmetals - Rockwell Hardness Test (Scale A) - Part 2: Preparation and Calibration of Standard Test Blocks First Edition Industrial tyres and rims ù Part 1: Pneumatic tyres (metric series) on 5░ tapered or flat base rims ù Designation, dimensions and marking Second Edition Industrial Tyres and Rims - Part 2: Pneumatic Tyres (Metric Series) on 5 Degree Tapered or Flat Base Rims - Load Ratings First Edition Industrial Tyres and Rims - Part 3: Rims First Edition Acoustics - Determination of Sound Power Levels of Noise Sources - Guidelines for the Use of Basic Standards Second Edition Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Precision Methods for Reverberation Rooms Third Edition; Replaces ISO 3742; 1988; Technical Corrigendum 1:03/01/2001 Acoustics - Determination of Sound Power Levels of Noise Sources - Engineering Methods for Small, Movable Sources in Reverberant Fields Part 1: Comparison Method for Hard-Walled Test Rooms First Edition; (CEN EN ISO 3743-1: 1995) Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Engineering Methods for Small, Movable Sources in Reverberant Fields - Part 2: Methods for Special Reverberation Test Rooms First Edition; Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Engineering Method in an Essentially Free Field over a Reflecting Plane Second Edition; (CEN EN ISO 3744: 1995) Acoustics Determination of sound power levels of noise sources using sound pressure Precision methods for anechoic and hemianechoic rooms Second Edition Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Survey Method Using an Enveloping Measurement Surface over a Reflecting Plane (CEN EN ISO 3746: 1995) Second Edition; Corrigendum 1: 1995 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Comparison Method in Situ Second Edition Zinc alloys Determination of magnesium content Flame atomic absorption spectrometric method Second Edition Steel - Determination of Effective Depth of Hardening After Flame or Induction Hardening First Edition Cast Carbon Steels for General Engineering Purposes Second Edition Oil of Cubeb First Edition Oil of patchouli [Pogostemon cablin (Blanco) Benth.] Second Edition Textiles - Care Labelling Code Using Symbols Second edition

ISO ISO

3759 3760

ISO ISO ISO ISO ISO

3761 3763 3764 3765 3766

ISO

3767-1

ISO

3767-2

ISO

3767-3

ISO

3767-4

ISO ISO

3767-5 3771

ISO ISO

3772 3773

ISO

3774

ISO

3776-1

ISO ISO ISO ISO

3776-2 3779 3780 3781

ISO

3783

Textiles ù Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change Fourth Edition Oil of Celery Seed (Apium Graveolens L.) Second Edition Oil of rosewood, Brazilian type [Aniba rosaeodora Ducke or Aniba parviflora (Meisn.) Mez.] Third edition; Replaces ISO 7353: 1985 Wrought Steels - Macroscopic Methods for Assessing the Content of Non-Metallic Inclusions First Edition Timekeeping Instruments - Movements - Types, Dimensions and Nomenclature Third Edition Timekeeping Instruments - Wristwatches - Dimensions of Bracelet-to-Case Fastening Elements Second Edition Construction Drawings - Simplified Representation of Concrete Reinforcement Third Edition; Replaces ISO 4066 Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 1: Common Symbols Third Edition Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 2: Symbols for Agricultural Tractors and Machinery Second Edition; Amendment 1: 02/15/1995; Amendment 2: Additional Symbols; 12/15/1998; Amendment 3: 03/15/2000 Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 3: Symbols for Powered Lawn and Garden Equipment Second Edition CEN EN ISO 3767-3: 1996 Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 4: Symbols for Forestry Machinery - Amendment 1: Additional Symbols First Edition; Amendment 1 10/01/2000 Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 5: Symbols for Manual Portable Forestry Machinery First Edition; Amendment 1:06-01-2001 Petroleum Products - Determination of Base Number - Perchloric Acid Potentiometric Titration Method Second Edition Photography - Rolls of Sensitized Material for the Pre-Press Industry - Dimensions and Related Requirements Third Edition; Cancels and Replaces ISO 6407:1992, ISO 6408:1991, and ISO 11313:1994 Cinematography - Tape Splices for 8 mm Type S Motion-Picture Film for Projector Use - Dimensions Second Edition Cinematography - 35 mm Motion-Picture Film Perforated 8 mm Type S (1-3-5-7-0) and (1-0) - Cutting and Perforating Dimensions Third Edition Tractors and machinery for agriculture Seat belts Part 1: Anchorage location requirements First Edition; Together with ISO 3776-2 replaces ISO 3776: 1989 Tractors and machinery for agriculture ù Seat belts ù Part 2: Anchorage strength requirements First edition [Cancelled: ISO 3776] Road Vehicles - Vehicle Identification Number (VIN) - Content and Structure Third Edition Road Vehicles - World Manufacturer Identifier (WMI) Code Second Edition Paper and Board - Determination of Tensile Strength After Immersion in Water Second Edition Paper and board Determination of resistance to picking Accelerated speed method using the IGT-type tester (electric model) Second Edition

ISO ISO ISO

3784 3785 3786

ISO ISO ISO ISO

3788 3790 3791 3792

ISO

3794

ISO ISO ISO ISO ISO

3795 3796 3797 3800 3801

ISO ISO

3802 3803

ISO

3807-1

ISO

3807-2

ISO

3808

ISO ISO ISO ISO

3809 3810 3813 3815-1

ISO ISO ISO ISO

3815-2 3819 3820 3821

Road Vehicles - Measurement of Impact Velocity in Collision Tests First Edition Metallic materials Designation of test specimen axes in relation to product texture Second Edition Shipbuilding - Inland Navigation Towing Hooks - Scale of Tractive Efforts First Edition Information Processing - 9-Track, 12,7 mm (0,5 in) Wide Magnetic Tape for Information Interchange Using Phase Encoding at 126 ftpmm (3 200 ftpi) - 63 cpmm (1 600 cpi) Second Edition Fishing Nets - Determination of Elongation of Netting Yarns First Edition Office Machines and Data Processing Equipment - Keyboard Layouts for Numeric Applications First Edition Adding Machines - Layout of Function Keyboard First Edition Essential Oils (Containing Tertiary Alcohols) - Estimation of Free Alcohols Content by Determination of Ester Value After Acetylation First Edition Road Vehicles, and Tractors and Machinery for Agriculture and Forestry - Determination of Burning Behaviour of Interior Materials Second Edition Ships and Marine Technology - Clear Openings for External Single-Leaf Doors Second Edition Shipbuilding - Vertical Steel Ladders First Edition Threaded Fasteners - Axial Load Fatigue Testing - Test Methods and Evaluation of Results First Edition; Textiles - Woven Fabrics - Determination of Mass per Unit Length and Mass per Unit Area First Edition Information Processing - General Purpose Reels with 8 mm (5/16 in) Centre Hole for Magnetic Tape for Interchange Instrumentation Applications First Edition Road Vehicles - Hydraulic Pressure Test Connection for Braking Equipment Second Edition Cylinders for Acetylene - Basic Requirements - Part 1: Cylinders without Fusible Plugs First Edition; This First Edition Together with 3807-2, Cancels and Replaces ISO 3807: 1977 Cylinders for Acetylene - Basic Requirements - Part 2: Cylinders with Fusible Plugs First Edition; This First Edition Together with 38071, Cancels and Replaces ISO 3807: 1977 Road Vehicles - Unscreened High-Voltage Ignition Cables - General Specifications, Test Methods and Requirements First Edition Oil of lime (cold pressed), Mexican type [Citrus aurantifolia (Christm.) Swingle], obtained by mechanical means Third Edition Floor Tiles of Agglomerated Cork - Methods of Test Second Edition; (Corrected and Reprinted - 1992) Resilient floor coverings Cork floor tiles Specification Third Edition Zinc and zinc alloys Part 1: Analysis of solid samples by optical emission spectrometry First edition Zinc and zinc alloys Part 2: Analysis by inductively coupled plasma optical emission spectrometry First Edition; Supersedes ISO 3815 Laboratory Glassware - Beakers First Edition Cinematography - Sprockets for 8 mm Type S Motion-Picture Film - Dimensions and Design First Edition Gas Welding Equipment - Rubber Hoses for Welding, Cutting and Allied Processes Third Edition

ISO

3822-1

ISO

3822-2

ISO

3822-3

ISO ISO ISO

3822-4 3823-1 3823-2

ISO

3826-1

ISO ISO

3826-3 3828

ISO ISO ISO

3830 3832 3833

ISO ISO ISO ISO

3834-1 3834-2 3834-3 3834-4

ISO

3834-5 CORR 1

ISO ISO ISO ISO ISO ISO

3834-5 3835-1 3835-2 3835-3 3835-4 3835-5

ISO

3837

Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations - Part 1: Method of Measurement Third Edition Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations - Part 2: Mounting and Operating Conditions for Draw-Off Taps and Mixing Valves Second Edition; (CEN EN ISO 3822-2: 1995) Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations - Part 3: Mounting and Operating Conditions for In-Line Valves and Appliances Second Edition Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations - Part 4: Mounting and Operating Conditions for Special Appliances Second Edition Dental Rotary Instruments - Burs - Part 1: Steel and Carbide Burs Second Edition Dentistry Rotary bur instruments Part 2: Finishing burs Second Edition Plastics collapsible containers for human blood and blood components Part 1: Conventional containers First Edition; Replaces ISO 3826 Plastics collapsible containers for human blood and blood components Part 3: Blood bag systems with integrated features First Edition Shipbuilding and Marine Structures - Deck Machinery - Vocabulary Second Edition Petroleum Products - Determination of Lead Content of Gasoline - Iodine Monochloride Method Third Edition; (CEN EN ISO 3830: 1995) Also Known As BS 2000 PART 270/96; [Use: IP 270/96] Passenger Cars - Luggage Compartments - Method of Measuring Reference Volume Third Edition Road Vehicles - Types - Terms and Definitions Second Edition Quality requirements for fusion welding - of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements Second edition Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements Second edition Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements Second edition Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements Second edition Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 TECHNICAL CORRIGENDUM 1 First edition Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 First edition Equipment for Vine Cultivation and Wine Making - Vocabulary - Part I First Edition Equipment for Vine Cultivation and Wine Making - Vocabulary - Part II First Edition Equipment for Vine Cultivation and Wine Making - Vocabulary - Part 3 First Edition Equipment for Vine Cultivation and Wine Making - Vocabulary - Part 4 First Edition Equipment for Vine Cultivation and Wine Making - Vocabulary - Part 5 First Edition Liquid Petroleum Products - Determination of Hydrocarbon Types - Fluorescent Indicator Adsorption Method First Edition; Corrigendum 1: 1994; Corrigendum 2: 1996

Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods Second Edition

ISO

3838

ISO ISO ISO ISO

3839 3841 3842 3846

ISO ISO ISO ISO ISO

3847 3848 3849 3850 3852

Petroleum Products - Determination of Bromine Number of Distillates and Aliphatic Olefins - Electrometric Method Second Edition Petroleum Waxes - Determination of Melting Point (Cooling Curve) First Edition Road vehicles Fifth wheels Interchangeability Fourth Edition Liquid Flow Measurement in Open Channels by Weirs and Flumes - Rectangular Broad-Crested Weirs Second Edition Liquid Flow Measurement in Open Channels by Weirs and Flumes - End-Depth Method for Estimation of Flow in Rectangular Channels with a Free Overfall First Edition Oil of Citronella, Java Type Second Edition; Technical Corrigendum 1: 11/01/2002 Oil of Citronella, Sri Lanka Type [Cymbopogon Nardus (L.) W. Watson Var. Lenabatu Stapf.] Second Edition Resilient floor coverings Determination of apparent density of composition cork First Edition Iron ores for blast furnace and direct reduction feedstocks ù Determination of bulk density Third Edition

ISO ISO

3853 3855

Road Vehicles - Towing Vehicle Coupling Device to Tow Caravans or Light Trailers - Mechanical Strength Test Second Edition Milling Cutters - Nomenclature First Edition; Corrigendum 1: 1996

ISO

3856-1

ISO

3856-2

ISO

3856-3

ISO

3856-4

ISO

3856-5

ISO

3856-6

Paints and Varnishes - Determination ofSoluble" Metal Content- Part 5: Determination of Hexavalent Chromium Content of the Pigment Portion of the Liquid Paint or the Paint in Powder Form - Diphenyl- carbazide Spectro- photometric Method Second Edition" Paints and Varnishes - Determination ofSoluble" Metal Content - Part 6: Determination of Total Chromium Content of the Liquid Portion of the Paint - Flame Atomic Absorption Spectrometric Method Second Edition"

ISO ISO ISO ISO

3856-7 3857-1 3857-2 3857-3

Paints and Varnishes - Determination ofSoluble" Metal Content - Part 7: Determination of Mercury Content of the Pigment Portion of the Paint and of the Liquid Portion of Water-Dilutable Paints - Flameless Atomic Absorption Spectrometric Method First Edition" Compressors, Pneumatic Tools and Machines - Vocabulary - Part I: General First Edition Compressors Pneumatic Tools and Machines - Vocabulary - Part II: Compressors First Edition Compressors, Pneumatic Tools and Machines - Vocabulary - Part 3: Pneumatic Tools and Machines Second Edition

Paints and Varnishes - Determination ofSoluble" Metal Content - Part 1: Determination of Lead Content - Flame Atomic Absorption Spectrometric Method and Dithizone Spectrophotometric Method Third Edition; (AS/NZS 1580.501.1:1994) 1994) (PNS 530: 1991)" Paints and Varnishes - Determination ofSoluble" Metal Content - Part 2: Determination of Antimony Content - Flame Atomic Absorption Spectrometric Method and Rhodamine B Spectrophotometric Method Second Edition" Paints and Varnishes - Determination ofSoluble" Metal Content - Part 3: Determination of Barium Content - Flame Atomic Emission Spectrometric Method Second Edition" Paints and Varnishes - Determination ofSoluble" Metal Content - Part 4: Determination of Cadmium Content - Flame Atomic Absorption Spectrometric Method and Polarographic Method Second Edition"

ISO ISO ISO ISO

3858 3859 3860 3861

ISO

3862-1

ISO ISO

3862-2 3863

ISO ISO

3864-1 3864-2

ISO ISO

3864-3 3865

ISO ISO

3866 3867

ISO ISO

3868 3869

ISO ISO ISO ISO ISO ISO

3870 3871 3873 3874 AMD 4 3874 AMD 3 3874 AMD 2

ISO ISO ISO ISO ISO ISO

3874 AMD 1 3874 3875 3876 3877-1 3877-2

Rubber compounding ingredients Carbon black Determination of light transmittance of toluene extract Second Edition; Replaces ISO 3858-1:1990 and ISO 3858-2:1990 Inverse Dovetail Cutters and Dovetail Cutters with Cylindrical Shanks Third Edition Bore Cutters with Key Drive - Form Milling Cutters with Constant Profile First Edition Rubber Hoses for Sand and Grit Blasting - Specification Third edition Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 1: Oil-based fluid applications First Edition Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 2: Water-based fluid applications First edition; Cancels and Replaces ISO 3862:1991 Cylindrical Cork Stoppers - Dimensional Characteristics, Sampling, Packaging and Marking Second Edition Graphical Symbols - Safety Colours and Safety Signs - Part 1: Design Principles for Safety Signs in Workplaces and Public Areas First Edition; Corrected Version: 12/15/2003 Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels First Edition Graphical symbols Safety colours and safety signs Part 3: Design principles for graphical symbols for use in safety signs First Edition Rubber, vulcanized or thermoplastic Methods of test for staining in contact with organic material Fourth Edition Office Machines and Printing Machines Used for Information Processing - Widths of Fabric Printing Ribbons on Spools Exceeding 19 mm First Edition Composition Cork - Expansion Joint Fillers - Test Methods Second Edition Metallic and Other Non-Organic Coatings - Measurement of Coating Thicknesses - Fizeau Multiple-Beam Interferometry Method First Edition; (CEN EN ISO 3868: 1994) Composition Cork - Expansion Joint Fillers - Specification, Packaging and Marking Second Edition Conveyor Belts (Fabric Carcass), with Length Between Pulley Centres up to 300 m, for Loose Bulk Materials - Adjustment of Take-Up Device First Edition Road Vehicles - Labelling of Containers for Petroleum-Based or Non-Petroleum-Based Brake Fluid Fourth Edition Industrial Safety Helmets First Edition Series 1 freight containers ù Handling and securing AMENDMENT 4: 45 ft containers First Edition Series 1 freight containers ù Handling and securing AMENDMENT 3: Double stack rail car operations First Edition Series 1 freight containers ù Handling and securing AMENDMENT 2: Vertical tandem lifting Fifth Edition Series 1 freight containers ù Handling and securing AMENDMENT 1: Twistlocks, latchlocks, stacking fittings and lashing rod systems for securing of containers Fifth Edition; Corrected and Reprinted 09/01/2001 Series 1 freight containers ù Handling and securing Fifth Edition Machine tools Test conditions for external cylindrical centreless grinding machines Testing of the accuracy Third Edition Shipbuilding - Inland Vessels - Hand-Holes Second Edition Tyres, Valves and Tubes - List of Equivalent Terms - Part I: Tyres Second Edition Tyres, Valves and Tubes - List of Equivalent Terms - Part 2: Tyre Valves Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO

3877-3 3877-4 3878 3880-1 3881 3882 3883 3887

ISO ISO ISO

3888-1 3888-2 3889

ISO

3890-1

ISO ISO

3890-2 3891

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

3892 3893 3894 3895 3896 3898 3899 3900 3901 3902 3903 3904 3907 3908 3909 3910

ISO

3911

Tyres, Valves and Tubes - List of Equivalent Terms - Part III: Tubes First Edition Tyres, Valves and Tubes - List of Equivalent Terms - Part 4: Solid Tyres First Edition Hardmetals - Vickers Hardness Test Second Edition; (CEN EN 23878: 1993) Building Construction - Stairs - Vocabulary - Part 1: First Edition Building Construction - Modular Co-Ordination - Stairs and Stair Openings - Co-Ordinating Dimensions First Edition Metallic and Other Inorganic Coatings - Review of Methods of Measurement of Thickness Third Edition Office Machines - Line and Character Capacity of Address Masters First Edition Steel - Determination of Depth of Decarburization Second Edition Passenger Cars - Test Track for a Severe Lane-Change Manoeuvre - Part 1: Double Lane-Change First Edition; Cancels and Replaces TR 3888: 1975 Passenger cars Test track for a severe lane-change manoeuvre Part 2: Obstacle avoidance First Edition Milk and milk products Specification of Mojonnier-type fat extraction flasks Second Edition; IDF 219 Milk and Milk Porducts - Determination of Residues of Organochlorine Compounds (Pesticides) - Part 1: General Considerations and Extraction Methods First Edition Milk and Milk Porducts - Determination of Residues of Organochlorine Compounds (Pesticides) - Part 2: Test Methods for Crude Extract Purification and Confirmation First Edition Acoustics - Procedure for Describing Aircraft Noise Heard on the Ground First Edition Conversion Coatings on Metallic Materials - Determination of Coating Mass per Unit Area - Gravimetric Methods Edition; (CEN EN ISO 3892: 1994) (PNS 683: 1990) Second Edition Concrete - Classification by Compressive Strength First Edition Road vehicles Wheels/rims for commercial vehicles Test methods Third Edition Road Vehicles - Screened and Waterproof Spark-Plug and Its Connection - Type 2 Third Edition Road Vehicles - Screened and Waterproof Spark-Plug and Its Connection - Type 3 Third Edition Bases for Design of Structures - Notations - General Symbols Third Edition Rubber - Nitrile latex - Determination of residual acrylonitrile content Third Edition Rubber - Nitrile Latex - Determination of Bound Acrylonitrile Content Second Edition Information and Documentation - International Standard Recording Code (ISRC) Second Edition Shipbuilding and Marine Structures - Gaskets for Rectangular Windows and Side Scuttles Second Edition Shipbuilding and Marine Structures - Ships┤ Ordinary Rectangular Windows Second Edition Shipbuilding and Marine Structures - Clear-View Screens Second Edition Hardmetals - Determination of Total Carbon Content - Gravimetric Method Second Edition; (CEN EN 23907: 1993) Hardmetals - Determination of Insoluble (Free) Carbon Content - Gravimetric Method Second Edition; (CEN EN 23908: 1993) Hardmetals - Determination of Cobalt - Potentiometric Method First Edition; (CEN EN 23909: 1993) Rubber Boots, Unlined Moulded Second Edition Wheels and Rims for Pneumatic Tyres - Vocabulary, Designation and Marking Roues Et Jantes Pour Pneumatiques - Vocabulaire, Designation Et Marquage Third Edition

ISO ISO ISO

3912 3913 3914-1

ISO

3914-2

ISO

3914-3

ISO

3914-4

ISO

3914-5

ISO

3914-6

ISO ISO

3914-7 3915

ISO ISO ISO ISO

3917 3918 3919 3923-1

Woodruff Keys and Keyways First Edition; (NZS/ISO 3912: 1977) Shipbuilding - Welded Steel Bollards First Edition: Addendum 1: 1980 Textile Machinery and Accessories - Cylindrical Tubes - Part 1: Recommended Main Dimensions Second Edition Textile Machinery and Accessories - Cylindrical Tubes - Part 2: Dimensions, Tolerances and Designation of Tubes for Open-End Spinning Machines Second Edition Textile Machinery and Accessories - Cylindrical Tubes - Part 3: Dimensions, Tolerances and Designation of Tubes for Tape Yarns Second Edition Textile Machinery and Accessories - Cylindrical Tubes - Part 4: Dimensions, Tolerances and Designation of Tubes for Textured Yarns Second Edition Textile Machinery and Accessories - Cylindrical Tubes - Part 5: Dimensions, Tolerances and Designation of Tubes for Continuous Spin-Drawn Synthetic Filament Yarns First Edition Textile Machinery and Accessories - Cylindrical Tubes - Part 6: Dimensions, Tolerances and Designation of Tubes for Cross-Wound Packages in Winding and Twisting First Edition Textile Machinery and Accessories - Cylindrical Tubes - Part 7: Dimensions, Tolerances and Designation of Perforated Tubes for Cheese Dyeing First Edition; Plastics - Measurement of Resistivity of Conductive Plastics First Edition Road Vehicles - Safety Glazing Materials - Test Methods for Resistance to Radiation, High Temperature, Humidity, Fire and Simulated Weathering Third Edition Milking Machine Installations - Vocabulary Installations De Traite Mecanique - Vocabulaire Third Edition Coated Abrasives - Flap Wheels with Shafts Fourth edition Metallic Powders - Determination of Apparent Density - Part 1: Funnel Method Second Edition

ISO ISO ISO ISO

3923-2 3924 3925 3926

Metallic Powders - Determination of Apparent Density - Part 2: Scott Volumeter Method First Edition; (CEN EN 23923-2: 1993) Petroleum Products - Determination of Boiling Range Distribution - Gas Chromatography Method Second Edition Unsealed Radioactive Substances - Identification and Certification First Edition Shipbuilding - Inland Navigation - Couplings for Oil and Fuel Reception - Mating Dimensions Second Edition

ISO ISO ISO ISO

3927 3928 3929 3930

ISO ISO ISO ISO

3934 3935 3936 3937

Metallic Powders, Excluding Powders for Hardmetals - Determination of Compressibility in Uniaxial Compression Third Edition Sintered Metal Materials, Excluding Hardmetals - Fatigue Test Pieces Second Edition Road vehicles Measurement methods for exhaust gas emissions during inspection or maintenance Third edition Instruments for Measuring Vehicle Exhaust Emissions Third Edition; OIML R 99; Amendment 1: 10/15/2004 Rubber, Vulcanized and Thermoplastic - Preformed Gaskets Used in Buildings - Classification, Specifications and Test Methods Second Edition Shipbuilding - Inland Navigation - Fire-Fighting Water System - Pressures First Edition Reduction Sleeves with Tenon Drive with External and Internal 7/24 Taper - Dimensions Third Edition Cutter Arbors with Tenon Drive - Dimensions Third Edition

ISO ISO ISO ISO ISO ISO

3938 3939 3940 3941 3943 3944

ISO ISO ISO ISO ISO

3946 3947 3948 3949 3950

Hydraulic Fluid Power - Contamination Analysis - Method for Reporting Analysis Data First Edition Fluid Power Systems and Components - Multiple Lip Packing Sets - Methods for Measuring Stack Heights First Edition Tapered Die-Sinking Cutters with Parallel Shanks First Edition Classification of Fires Second Edition Photography - Processing Chemicals - Specifications for Anhydrous Sodium Acetate Second Edition Fertilizers - Determination of Bulk Density (Loose) Third Edition; (CEN EN 1236: 1995) Starches and Derived Products - Determination of Total Phosphorous Content - Spectrophotometric Method First Edition; (CENELEC EN ISO 3946 - 1994) Starches, Native or Modified - Determination of Total Fat Content First Edition; (CENELEC EN ISO 3947 - 1994) Shipbuilding - Inland Vessels - Compressed-Air Systems - Pressure Ranges First Edition Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification Third Edition Dentistry - Designation System for Teeth and Areas of the Oral Cavity Second Edition; (Corrected and Reprinted - 1995)

ISO

3951-1

Sampling procedures for inspection by variables Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL First edition; Cancels and Replaces ISO 3951:1989

ISO

3951-2

ISO

3951-3

ISO ISO ISO ISO ISO ISO ISO ISO ISO

3951-5 3952-1 3952-2 3952-3 3952-4 3953 3954 3958 3959

ISO ISO ISO ISO ISO

3960 3961 3963 3964 3965

Sampling procedures for inspection by variables Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics First edition; Cancels and Replaces ISO 3951:1989 Sampling procedures for inspection by variables ù Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lotby-lot inspection First Edition Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) First Edition; Kinematic Diagrams - Graphical Symbols - Part 1 First Edition; Amendment 1: 10/15/2002 Kinematic Diagrams - Graphical Symbols - Part 2 First Edition Kinematic Diagrams - Graphical Symbols - Part 3 First Edition; (CEN EN ISO 3952-3: 1994) Kinematic Diagrams - Graphical Symbols - Part 4 First Edition Metallic Powders - Determination of Tap Density Third Edition; (CEN EN ISO 3953: 1995) Powders for Powder Metallurgical Purposes - Sampling Second Edition Passenger Cars - Driver Hand-Control Reach Second Edition Green Bananas - Ripening Conditions First Edition Animal and vegetable fats and oils ù Determination of peroxide value ù Iodometric (visual) endpoint determination Fourth Edition Animal and Vegetable Fats and Oils - Determination of Iodine Value Third Edition Fertilizers - Sampling from a Conveyor by Stopping the Belt First Edition Dental Handpieces - Coupling Dimensions Second Edition; (CAN/CSA-Z349.29-M92) Agricultural Wheeled Tractors - Maximum Speeds - Method of Determination Second Edition

ISO ISO

3968 3969

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

3970 3972 3974 3975 3976 3977-1 3977-2 3977-3 3977-4 3977-5 3977-7 3977-8 3977-9

ISO

3978

ISO ISO ISO ISO ISO

3979 3980 3981 3984 3987

ISO

3993

ISO

3994

ISO

3995

ISO ISO

3996 3998

ISO

3999

Hydraulic Fluid Power - Filters - Evaluation of Differential Pressure Versus Flow Characteristics Second Edition; Technical Corrigendum 1: 9/01/2002; Supersedes (NFPA) B93.80M Shipbuilding - Inland Vessels - Operational Documentation First Edition Modular Units for Machine Tool Construction - Integral Way Columns - Floor-Mounted Type First Edition; Amendment 1: 1982 Sensory Analysis - Methodology - Method of Investigating Sensitivity of Taste Second Edition Definitions of Living Animals for Slaughter - Ovines First Edition Definitions of Living Animals for Slaughter - Horses First Edition Milk fat Determination of peroxide value Second Edition Gas Turbines - Procurement - Part 1: General Introduction and Definitions First Edition; Replaces ISO 3977:1991 Gas Turbines - Procurement - Part 2: Standard Reference Conditions and Ratings First Edition; Replaces ISO 3977:1991 Gas Turbines - Procurement - Part 3: Design Requirements Second Edition Gas Turbines - Procurement - Part 4: Fuels and Environment First Edition Gas Turbines - Procurement - Part 5: Applications for Petroleum and Natural Gas Industries First Edition Gas Turbines - Procurement - Part 7: Technical Information First Edition Gas Turbines - Procurement - Part 8: Inspection, Testing, Installation and Commissioning First Edition Gas Turbines - Procurement - Part 9: Reliability, Availability, Maintainability and Safety First Edition Aluminium and Aluminium Alloys - Determination of Chromium - Spectrophotometric Method Using Diphenylcarbazide, After Extraction First Edition Aluminium and Aluminium Alloys - Determination of Nickel - Spectrophotometric Method Using Dimethylglyoxime First Edition Aluminium and Aluminium Alloys - Determination of Copper - Atomic Absorption Spectrophotometric Method First Edition Aluminium and Aluminium Alloys - Determination of Nickel - Atomic Absorption Spectrophotometric Method First Edition Road vehicles Rear moving barrier impact test procedure Third Edition Petroleum Products - Lubricating Oils and Additives - Determination of Sulphated Ash Second Edition Liquefied Petroleum Gas and Light Hydrocarbons - Determination of Density or Relative Density - Pressure Hydrometer Method First Edition; (CEN EN ISO 3993: 1995) Plastics Hoses - Helical-Thermoplastic-Reinforced Thermoplastics Hoses for Suction and Discharge of Aqueous Materials Specification Third Edition Metallic Powders - Determination of Green Strength by Transverse Rupture of Rectangular Compacts Second Edition; (CEN EN 23995: 1993) Road Vehicles - Brake Hose Assemblies for Hydraulic Braking Systems Used with a Non-Petroleum-Base Brake Fluid Third Edition Textiles - Determination of Resistance to Certain Insect Pests First Edition Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests Second Edition; Supersedes ISO 3999-1: 2000

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4000-1 4000-2 4001 4002-1 4002-2 4003 4004 4006 4007 4008-1 4008-2

Passenger Car Tyres and Rims - Part 1: Tyres (Metric Series) Eighth Edition Passenger car tyres and rims ù Part 2: Rims Fourth Edition Shipbuilding - Inland Navigation - Raft-Type Life-Saving Apparatus First Edition Equipment for Sowing and Planting - Disks - Part I: Concave Disks Type D1 - Dimensions First Edition Equipment for Sowing and Planting - Disks - Part II: Flat Disks Type D2 with Single Bevel - Dimensions First Edition Permeable Sintered Metal Materials - Determination of Bubble Test Pore Size First Edition; (CEN EN 24003: 1993) Agricultural Tractors and Machinery - Track Widths First Edition Measurement of Fluid Flow in Closed Conduits - Vocabulary and Symbols Second Edition; (CEN EN 24006: 1993) Personal Eye-Protectors - Vocabulary First Edition Road Vehicles - Fuel Injection Pump Testing - Part 1: Dynamic Conditions Second Edition; (Erratum-1982) Road Vehicles - Fuel Injection Pump Testing - Part 2: Static Conditions First Edition

ISO

4008-3

Road Vehicles - Fuel Injection Pump Testing - Part 3: Application and Test Procedures First Edition; Amendment 1: 10/01/2002

ISO ISO ISO

4009 4010 4014

Commercial Vehicles - Location of Electrical and Pneumatic Connections between Towing Vehicles and Trailers Third Edition Diesel Engines - Calibrating Nozzle, Delay Pintle Type Second Edition Hexagon Head Bolts - Product Grades A and B Third Edition

ISO ISO ISO ISO ISO ISO

4015 4016 4017 4018 4019 4020

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4021 4022 4023 4024 4026 4027 4028 4029 4030 4032 4033

Hexagon Head Bolts - Product Grade B - Reduced Shank (Shank Diameter is Approximately Equal to Pitch Diameter) First Edition Hexagon Head Bolts - Product Grade C Third Edition Hexagon Head Screws - Product Grades A and B Third Edition Hexagon Head Screws - Product Grade C Third Edition Structural Steels - Cold-Formed, Welded, Structural Hollow Sections - Dimensions and Sectional Properties Second Edition Road Vehicles - Fuel Filters for Diesel Engines - Test Methods First Edition; Replaces ISO 4020-1 Hydraulic Fluid Power - Particulate Contamination Analysis - Extraction of Fluid Samples from Lines of an Operating System Second Edition Permeable Sintered Metal Materials - Determination of Fluid Permeability Second Edition Rubber Hoses for Steam - Test Methods Third Edition (CEN EN ISO 4023:1995) Road Vehicles - Ignition Coils - Low-Tension Cable Connections Second Edition Hexagon socket set screws with flat point Third Edition Hexagon Socket Set Screws with Cone Point Third Edition Hexagon Socket Set Screws with Dog Point Third Edition Hexagon socket set screws with cup point Third Edition Road Vehicles - Vehicle Identification Number (VIN) - Location and Attachment Second Edition Hexagon Nuts, Style 1 - Product Grades A and B Third Edition; Corrected and Reprinted: 03/01/2001 Hexagon Nuts, Style 2 - Product Grades A and B Second Edition

ISO ISO ISO

4034 4035 4036

ISO

4037-1

ISO

4037-2

ISO

4037-3

ISO

4037-4

Hexagon Nuts - Product Grade C Third Edition Hexagon Thin Nuts (Chamfered) - Product Grades A and B Third Edition Hexagon Thin Nuts (Unchamfered) - Product Grade B Second Edition; Corrected and Reprinted 12-1-2000 X and Gamma Reference Radiation for Calibrating Dosemeters and Doserate Meters and for Determining Their Response as a Function of Photon Energy - Part 1: Radiation Characteristics and Production Methods First Edition X and Gamma Reference Radiation for Calibrating Dosemeters and Doserate Meters and for Determining Their Response as a Function of Photon Energy - Part 2: Dosimetry for Radiation Protection over the Energy Ranges 8 keV to 1,3 MeV and 4 MeV to 9 MeV First Edition X and Gamma Reference Radiation for Calibrating Dosemeters and Doserate Meters and for Determining Their Response as a Function of Photon Energy - Part 3: Calibration of Area and Personal Dosemeters and the Measurement of Their Response as a Function of Energy and Angle of Incidence First Edition X and Gamma Reference Radiation for Calibrating Dosemeters and Doserate Meters and for Determining Their Response as a Function of Photon Energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields First Edition

ISO

4038

Road Vehicles - Hydraulic Braking Systems - Simple Flare Pipes, Tapped Holes, Male Fittings and Hose End Fittings Third Edition

ISO

4039-1

ISO ISO ISO ISO ISO ISO

4039-2 4040 4042 4043 4044 4045

ISO

4046-1

ISO

4046-2

ISO

4046-3

ISO

4046-4

Road Vehicles - Pneumatic Braking Systems - Part 1: Pipes, Male Fittings and Tapped Holes with Facial Sealing Surface First Edition Road Vehicles - Pneumatic Braking Systems - Part 2: Pipes, Male Fittings and Tapped Holes with Conical Sealing Surface First Edition Road Vehicles - Location of Hand Controls, Indicators and Tell-Tales in Motor Vehicles Fourth Edition Fasteners - Electroplated Coatings Second Edition Mobile Booths for Simultaneous Interpretation - General Characteristics and Equipment Second Edition Leather - Preparation of Chemical Test Samples First Edition Leather - Determination of pH First Edition Paper, Board, Pulps and Related Terms - Vocabulary - Part 1: Alphabetical Index Papier, Carton, Pates et Termes Connexes Vocabulaire - Partie 1: Index Alphabetique First Edition Paper, Board, Pulps and Related Terms - Vocabulary - Part 2: Pulping Terminology Papier, Carton, Pates et Termes Connexes Vocabulaire - Partie 2: Terminologie de la Fabrication de la Pate First Edition Paper, Board, Pulps and Related Terms - Vocabulary - Part 3: Paper-Making Terminology Papier, Carton, Pates et Termes Connexes - Vocabulaire - Partie 3: Terminologie de la Fabrication du Papier First Edition Paper, Board, Pulps and Related Terms - Vocabulary - Part 4: Paper and Board Grades and Converted Products Papier, Carton, Pates Et Termes Connexes - Vocabulaire - Partie 4: Categories Et Produits Transformes De Papier Et De Carton First Edition; Together with ISO 4046-1, ISO 4046-2, ISO 4046-3 and ISO 4046-5, cancel and replaces ISO 4046: 1978

ISO ISO ISO ISO ISO ISO ISO

4046-5 4047 4048 4049 4050 4051 4052

ISO ISO

4057 4058

ISO ISO

4059 4063

ISO

4064-1

ISO

4064-2

ISO ISO

4064-3 4065

ISO ISO

4067-2 4072

ISO ISO ISO

4073 4074 CORR 1 4074

ISO

4079-1

ISO

4079-2

ISO ISO

4080 4081

Paper, Board, Pulps and Related Terms - Vocabulary - Part 5: Properties of Pulp, Paper and Board Papier, Carton, Pates et Termes Connexes - Vocabulaire - Partie 5: Proprietes De La Pate, Du Papier Et Due Carton First Edition; Together with ISO 4046-1, ISO 4046-2, ISO 4046-3 and ISO 4046-4, cancel and replace ISO 4046: 1978 Leather - Determination Sulphated Total Ash and Sulphated Water-Insoluble Ash First Edition Leather - Determination of Matter Soluble in Dichloromethane First Edition Dentistry - Polymer-Based Filling, Restorative and Luting Materials Third Edition Shipbuilding - Inland Vessels -Rhine" and Hall┤s Stockless Anchors First Edition" Shipbuilding - Inland Vessels - Steering Gear - Values of Torques First Edition Coffee - Determination of Caffeine Content (Reference Method) First Edition Information Processing - Data Interchange on 6,30 mm (0.25 in) Magnetic Tape Cartridge, 63 bpmm (1 600 bpi) Phase-Encoded Second Edition Magnesium and Its Alloys - Determination of Nickel - Photometric Method Using Dimethylglyoxime First Edition Polyethylene (PE) Pipes - Pressure Drop in Mechanical Pipe-Jointing Systems - Method of Test and Requirements First Edition Welding and Allied Processes - Nomenclature of Processes and Reference Numbers Third Edition Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 1: Specifications Third Edition; Replaces ISO 7858-1:1998 and ISO 10385-1:2000 Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 2: Installation requirements Third Edition; Replaces ISO 7858-2:2000 Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 3: Test methods and equipment Third Edition; Replaces ISO 7858-3:1992 Thermoplastic Pipes - Universal Wall Thickness Table Second Edition Building and Civil Engineering Drawings - Installations - Part 2: Simplified Representation of Sanitary Appliances First Edition Green Coffee in Bags - Sampling First Edition Dental Equipment - Items of Dental Equipment at the Working Place - Identification System First Edition; (Corrected and Reprinted 1981) (CAN/CSA-Z349.30-M92) Natural latex rubber condoms ù Requirements and test methods First Edition Natural latex rubber condoms ù Requirements and test methods First Edition Rubber Hoses and Hose Assemblies - Textile-Reinforced Hydraulic Types - Specification - Part 1: Oil-Based Fluid Applications First Edition Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 2: Water-based fluid applications First Edition Rubber and Plastics Hoses and Hose Assemblies - Determination of Permeability to Gas Third Edition; Corrigendum 1-1997; Corrigendum 2-1998 Rubber hoses and tubing for cooling systems for internal-combustion engines Specification Second Edition

ISO ISO ISO ISO ISO ISO

4082 4084 4085 4086 4087 4089

ISO ISO ISO

4090 4091 4093

ISO ISO ISO

4094 4095 4097

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4098 4100 4101 4102 4103 4105 4106 4107 4112 4113 4115 4116 4117 4118 4119 4120 4121 4123 4124 4125 4126-1

Road Vehicles - Motor Vehicles - Flasher Units First Edition Aircraft - Repairable Contactors (Not Hermetically Sealed) - Performance Requirements First Edition Shipbuilding - Inland Navigation - Swing Derricks First Edition Road Vehicles - 90 Semi-Trailer Fifth Wheel Kingpin - Interchangeability Third Edition Micrographics Microfilming of newspapers for archival purposes on 35 mm microfilm Third Edition Shipbuilding - Inland Navigation - Sealing Rubber for Covers of Cargo Hatches First Edition Photography - Medical Radiographic Cassettes/Screens/Films and Hard-copy Imaging Films - Dimensions and Specifications Third Edition Road Vehicles - Connectors for the Electrical Connection of towing and towed vehicles, tests and requirements Third Edition Diesel Engines - Fuel Injection Pumps - High-Pressure Pipes for Testing Third Edition Paper, board and pulps - International calibration of testing apparatus - Nomination and acceptance of standardizing and authorized laboratories Second edition Aerospace - Bihexagonal Drives - Wrenching Configuration - Metric Series Second Edition Rubber, Ethylene-Propylene-Diene (EPDM) - Evaluation Procedure Fifth Edition Leather Chemical tests Determination of water-soluble matter, water-soluble inorganic matter and watersoluble organic matter First Edition; IULTCS/IUC 6 Road Vehicles - World Parts Manufacturer Identifier (WPMI) Code First Edition Drawn Steel Wire for Elevator Ropes - Specifications First Edition Equipment for Crop Protection - Sprayers - Connection Threading First Edition Concrete - Classification of Consistency First Edition Textile Machinery and Accessories - Wires for Flexible Card Clothings First Edition Motorcycles - Engine Test Code - Net Power Third Edition Commercial Vehicles - Wheel Hub Attachment Dimensions Third Edition Cereals and Pulses - Guidance on Measurement of the Temperature of Grain Stored in Bulk Second Edition Road Vehicles - Calibration Fluid for Diesel Injection Equipment Second Edition Air Cargo Equipment - Air/Land Pallet Nets Third Edition Air Cargo Equipment - Ground Equipment Requirements for Compatibility with Aircraft Unit Load Devices Second Edition Air and Air/Land Cargo Pallets - Specification and Testing Second Edition Air cargo Non-certified containers for the lower deck of large-capacity aircraft Specification and testing Third Edition Pulps - Determination of Stock Concentration Second Edition (CEN EN ISO 4119: 1996) Sensory analysis Methodology Triangle test Second Edition Sensory analysis Guidelines for the use of quantitative response scales Second Edition Belt Conveyors - Impact Rings for Carrying Idlers and Discs for Return Idlers - Main Dimensions First Edition; Liquid Hydrocarbons - Dynamic Measurement - Statistical Control of Volumetric Metering Systems First Edition Dry Fruits and Dried Fruits - Definitions and Nomenclature Second Edition Safety devices for protection against excessive pressure Part 1: Safety valves Second Edition

ISO

4126-2

ISO

4126-3

ISO

4126-4

ISO

4126-5 CORR 2

ISO

4126-5 CORR 1

ISO

4126-5

ISO

4126-6

ISO ISO ISO ISO ISO ISO ISO ISO

4126-7 CORR 1 4126-7 4127-1 4127-2 4128 4129 4130 4131

ISO ISO

4132 4134

ISO ISO ISO ISO ISO

4135 4136 4138 4139 4140

ISO

4141-1

ISO

4141-2

Safety Devices for Protection Against Excessive Pressure - Part 2: Bursting Disc Safety Devices First Edition Safety devices for protection against excessive pressure Part 3: Safety valves and bursting disc safety devices in combination First Edition;:1991 [Replaced: ISO 6718] Safety devices for protection against excessive pressure Part 4: Pilot-operated safety valves First Edition; Replaces ISO 6718:1991 Safety devices for protection against excessive pressure ù Part 5: Controlled safety pressure relief systems (CSPRS) TECHNICAL CORRIGENDUM 1 First Edition Safety devices for protection against excessive pressure ù Part 5: Controlled safety pressure relief systems (CSPRS) TECHNICAL CORRIGENDUM 1 First Edition Safety devices for protection against excessive pressure ù Part 5: Controlled safety pressure relief systems (CSPRS) First Edition Safety devices for protection against excessive pressure Part 6: Application, selection and installation of bursting disc safety devices First Edition Safety devices for protection against excessive pressure ù Part 7: Common data TECHNICAL CORRIGENDUM 1 First Edition Safety devices for protection against excessive pressure ù Part 7: Common data First Edition Shipbuilding - Inland Navigation - Fairleads - Part 1: Two-Lip Fairleads First Edition Shipbuilding - Inland Vessels - Fairleads - Part 2: Roller Fairleads First Edition Aircraft - Air Mode Modular Containers First Edition Mopeds - Symbols for Controls, Indicators and Tell-Tales Second Edition Road Vehicles - Three-Dimensional Reference System and Fiducial Marks - Definitions First Edition Road Vehicles - Dimensional Codes for Passenger Cars First Edition; Unplasticized Polyvinyl Chloride (PVC) and Metal Adaptor Fittings for Pipes Under Pressure - Laying Lengths and Size of Threads Metric Series First Edition Meat and Meat Products - Determination of L-(+)- Glutamic Acid Content - Reference Method Second Edition Anaesthetic and Respiratory Equipment - Vocabulary Materiel D'Anesthesie Et De Reanimation Respiratoire - Vocabulaire Third Edition Destructive Tests on Welds in Metallic Materials - Transverse Tensile Test Second Edition Passenger cars Steady-state circular driving behaviour Open-loop test methods Third Edition Ferrosilicon - Determination of Aluminium Content - Flame Atomic Absorption Spectrometric Method First Edition Ferrochromium and Ferrosilicochromium - Determination of Chromium Content - Potentiometric Method First Edition Road vehicles - Multi-core connecting cables - Part 1: Test methods and requirements for basic performance sheathed cables Second Edition Road vehicles Multi-core connecting cables Part 2: Test methods and requirements for high performance sheathed cables Second Edition

ISO

4141-3

ISO ISO ISO ISO ISO

4141-4 4142 4143 4144 4145

ISO ISO ISO ISO ISO ISO

4147 4148 4149 4150 4151 4153

ISO

4156-1

ISO

4156-2

ISO ISO ISO ISO

4156-3 4157-1 4157-2 4157-3

ISO ISO ISO ISO ISO ISO ISO ISO ISO

4158 4159 4161 4162 4164 4165 4167 4168 4170

Road Vehicles - Multicore Connecting Cables - Part 3: Construction Dimensions and Marking of Unscreened Sheathed Low-Voltage Cables Second Edition Road Vehicles - Multi-core Connecting Cables - Part 4: Articulation Test Method and Requirements for Coiled Cable Assemblies First Edition Laboratory Glassware - Test Tubes Second Edition Shipbuilding - Inland Vessels - Open Rowing Lifeboats First Edition Pipework - Stainless Steel Fittings Threaded in Accordance with ISO 7-1 Second Edition Non-Alloy Steel Fittings Threaded to ISO 7/1 Second Edition Aerospace - Nuts, Hexagonal, Slotted (Castellated), Nrml Ht, Nrml Across Flats, with MJ Threads, Cls: 600MPa (at Ambt T)/120 Dgs C, 600MPa (at Ambt T)/235 Dgs. C, 900MPa (at Ambt T)/425 Dgs. C, 1100 MPa (at Ambt T)/235 Dgs. C, 1100 MPa (at Ambt T)/315 Dgs. C, 1100MPa (at Ambt T)/650 Dgs. C, 1210MPa (at Ambt T)/730 Dgs. C, 1250MPa (at Ambt T)/235 Dgs. C and 1550MPa (at Ambt T)/600 Dgs C - Dims. Third Edition Road Vehicles - Special Warning Lamps - Dimensions Fourth Edition Green Coffee - Olfactory and visual examination and determination of foreign matter and defects Second edition Green Coffee - Size Analysis - Manual Sieving Second Edition Road Vehicles - Mopeds - Type, Location and Functions of Controls Second Edition Aircraft - Pressure Fuel Dispensing System - Test Procedure and Limit Value for Shut-Off Surge Pressure First Edition Straight cylindrical involute splines - Metric module, side fit - Part 1: Generalities First Edition; Together with ISO 4156-2 and ISO 4156-3 Replaces ISO 4156 Straight cylindrical involute splines - Metric module, side fit - Part 2: Dimensions First Edition; Together with ISO 4156-1 and ISO 4156-3 Replaces ISO 4156 Straight cylindrical involute splines - Metric module, side fit - Part 3: Inspection First Edition; Together with ISO 4156-1 and ISO 41562 Replaces ISO 4156 Construction Drawings - Designation Systems - Part 1: Buildings and Parts of Buildings Second Edition Construction Drawings - Designation Systems - Part 2: Room Names and Numbers Second Edition Construction Drawings - Designation Systems - Part 3: Room Identifiers First Edition Ferrosilicon, Ferrosilicomanganese and Ferrosilicochromium - Determination of Silicon Content - Gravimetric Method First Edition Ferromanganese and Ferrosilicomanganese - Determination of Manganese Content - Potentiometric Method First Edition Hexagon Nuts with Flange - Coarse Thread Second Edition Hexagon Flange Bolts - Small Series First Edition Road Vehicles - Mopeds - Engine Test Code - Net Power First Edition Road Vehicles - Electrical Connections - Double-Pole Connection Second Edition Polyolefin agricultural twines Second Edition Timekeeping Instruments - Conditions for Carrying out Checks on Radioluminescent Deposits Second Edition Air Cargo Equipment - Interline Pallet Nets Third Edition

ISO ISO ISO

4171 4172 4173

Air Cargo Equipment - Interline Pallets Second Edition Technical Drawings - Construction Drawings - Drawings for the Assembly of Prefabricated Structures Second Edition Ferromolybdenum - Determination of Molybdenum Content - Gravimetric Method First Edition

ISO ISO ISO ISO ISO

4174 4175 4176 4178 4179

ISO

4180-1

ISO ISO ISO ISO

4180-2 4182 4183 4184

ISO ISO ISO ISO ISO ISO ISO

4185 4186 4187 4190-1 4190-2 4190-3 4190-5

ISO

4190-6

Cereals, Oilseeds and Pulses - Measurement of Unit Pressure Loss in One-Dimensional Air Flow Through Bulk Grain Second Edition Shipbuilding - Shipborne Barges, Series 1 - Main Dimensions First Edition Fertilizers - Determination of Nitrate Nitrogen Content - Nitron Gravimetric Method First Edition Complete, Filled Transport Packages - Distribution Trials - Information to Be Recorded First Edition; (CEN EN 24178: 1992) Ductile iron pipes and fittings for pressure and non-pressure pipelines Cement mortar lining Third Edition Complete, Filled Transport Packages - General Rules for the Compilation of Performance Test Schedules - Part 1: General Principles First Edition; (CEN EN 24180-1: 1992) Complete, Filled Transport Packages - General Rules for the Compilation of Performance Test Schedules - Part 2: Quantitative Data First Edition; (CEN EN 24180-2: 1992) Motor Vehicles - Measurement of Variations in Dipped-Beam Headlamp Angle as a Function of Load Third Edition Belt Drives - Classical and Narrow V-Belts - Grooved Pulleys (System Based on Datum Width) Third Edition Belt Drives - Classical and Narrow V-Belts - Lengths in Datum System Second Edition; (Corrected and Reprinted - 1993) Measurement of Liquid Flow in Closed Conduits - Weighing Method (CEN EN 24185: 1993) First Edition; Technical Corrigendum 1: 1993 Asparagus - Guide to Storage First Edition Horse-Radish - Guide to Storage First Edition Lift (US: Elevator) Installation - Part 1: Class I, II, III and VI Lifts Third Edition; Corrected and Reprinted: 03/01/2001 Lift (US: Elevator) Installation - Part 2: Class IV Lifts Second Edition Passenger Lift Installations - Part 3: Service Lifts Class V First Edition Lift (Elevator) installation Part 5: Control devices, signals and additional fittings Third Edition Lifts and Service Lifts (USA: Elevators and Dumbwaiters) - Part 6: Passenger Lifts to Be Installed in Residential Buildings - Planning and Selection First Edition

ISO

4192

ISO ISO

4193 4194

ISO ISO ISO

4195 4197 4198

Aluminium and Aluminium Alloys - Determination of Lead Content - Flame Atomic Absorption Spectrometric Method First Edition Aluminium and Aluminium Alloys - Determination of Chromium Content - Flame Atomic Absorption Spectrometric Method First Edition Magnesium Alloys - Determination of Zinc Content - Flame Atomic Absorption Spectrometric Method First Edition Conveyor belts with heat-resistant rubber covers ù Heat resistance of covers ù Requirements and test methods First edition [Replaced: ISO 4195-1, ISO 4195-2] Equipment for Working the Soil - Hoe Blades - Fixing Dimensions Second Edition Surface Active Agents - Detergents for Hand Dishwashing - Guide for Comparative Testing of Performance First Edition

Plain End Steel Tubes, Welded and Seamless - General Tables of Dimensions and Masses per Unit Length Fourth Edition; Replaces ISO 134: 1973 and ISO 336: 1976 Reduction Sleeves with External 7/24 Taper for Tools with Morse Taper Shanks Second Edition Parallel Shank Tools - Driving Tenons and Sockets - Dimensions First Edition Countersinks, 90 Degrees, with Morse Taper Shanks and Detachable Pilots First Edition

ISO ISO ISO ISO

4200 4202 4203 4204

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4205 4206 4207 4208 4209-1 4209-2 4210 4211 4211-2 4211-3 4211-4

ISO

4217

ISO

4220

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4221 4223-1 4223-2 4224 4225 4226 4228 4229 4230 4231

Air Quality - Determination of Mass Concentration of Sulphur Dioxide in Ambient Air - Thorin Spectrophotometric Method First Edition Definitions of Some Terms Used in the Tyre Industry - Part 1: Pneumatic Tyres Fourth Edition Definitions of Some Terms Used in the Tyre Industry - Part 2: Solid Tyres Second Edition Ambient Air - Determination of Carbon Monoxide - Non-Dispersive Infrared Spectrometry Method First Edition Air Quality - General Aspects - Vocabulary Second Edition Air Quality - General Aspects - Units of Measurement Second Edition Spanners and Wrenches - Spline Drive Ends for Power Socket Wrenches First Edition Assembly Tools for Screws and Nuts - Single-Head Engineer┤s Wrenches - Gaps from 50 to 120 mm First Edition Hand- and Machine-Operated Circular Screwing Dies for Taper Pipe Threads - R Series Second Edition Hand- and Machine-Operated Circular Screwing Dies for Parallel Pipe Threads - G Series Second Edition

ISO

4232-1

Office Machines - Minimum Information to Be Included in Specification Sheets - Part 1: Duplicators First Edition; Erratum-1980

ISO

4232-2

Office Machines - Minimum Information to Be Included in Specifications Sheets - Part 2: Document Copying Machines First Edition

Countersinks, 90 Degrees, with Parallel Shanks and Solid Pilots Second Edition; (BS 328: Part 6: 1992) (NZS/BS 328: Pt 6: 1992) Counterbores with Parallel Shanks and Solid Pilots Second Edition (BS 328: Part 7: 1992) (NZS/BS 328: Pt 7: 1992) Counterbores with Morse Taper Shanks and Detachable Pilots First Edition Detachable Pilots for Use with Counterbores and 90 Degrees Countersinks - Dimensions First Edition Truck and bus tyres and rims (metric series) Part 1: Tyres Sixth Edition Truck and Bus Tyres and Rims (Metric Series) - Part 2: Rims Third Edition Cycles - Safety Requirements for Bicycles Fourth Edition Furniture - Assessment of Surface Resistance to Cold Liquids First Edition Furniture - Tests for Surfaces - Part 2: Assessment of Resistance to Wet Heat First Edition Furniture - Tests for Surfaces - Part 3: Assessment of Resistance to Dry Heat First Edition Furniture - Tests for Surfaces - Part 4: Assessment of Resistance to Impact First Edition Codes for the representation of currencies and funds Codes pour la reprÚsentation des monnaies et types de fonds Sixth Edition; Technical Corrigendum: 11/01/2004 Ambient Air - Determination of a Gaseous Acid Air Pollution Index - Titrimetric Method with Indicator or Potentiometric End-Point Detection First Edition; (Corrected and Reprinted - 1984)

ISO

4232-3

ISO ISO

4238 4241

ISO

4242

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4243 4246 4247 4248 4249-1 4249-2 4249-3 4250-1 4250-2 4250-3

ISO ISO ISO

4251-1 4251-2 4251-3

ISO

4251-4

ISO ISO ISO ISO ISO

4251-5 4252 4253 4254-1 4254-3

ISO

4254-5

ISO

4254-6

ISO

4254-7

Office Machines - Minimum Information to Be Included in Specification Sheets - Part 3: Postal Franking Machines First Edition Cinematography - Optical Printing Ratios for Enlargement and Reduction of Motion-Picture Film Images - Specifications First Edition Cinematography - Theatre Projection Leader, Trailer and Cue Marks - Specifications Third Edition Cinematography - Recording Head Gaps for Two Sound Records on 16 mm Magnetic Film - Positions and Width Dimensions First Edition Cinematography - Picture Image Area and Photographic Sound Record on 16 mm Motion- Picture Release Prints - Positions and Dimensions First Edition Cinematography - Vocabulary Second Edition Jig Bushes and Accessories for Drilling Purposes - Dimensions First Edition Jig Bushes - Definitions and Nomenclature First Edition Motorcycle Tyres and Rims (Code Designated Series) - Part 1: Tyres Second Edition Motorcycle Tyres and Rims (Code-Designated Series) - Part 2: Tyre Load Ratings Second Edition Motorcycle Tyres and Rims (Code-Designated Series) - Part 3: Rims Fifth Edition Earth-mover tyres and rims Part 1: Tyre designation and dimensions Fourth Edition Earth-mover tyres and rims Part 2: Loads and inflation pressures Fourth Edition Earth-mover tyres and rims Part 3: Rims Third Edition Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 1: Tyre designation and dimensions, and approved rim contours Sixth Edition Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 2: Tyre load ratings Sixth Edition Tyres (Ply Rating Marked Series) and Rims for Agricultural Tractors and Machines - Part 3: Rims Fourth Edition Tyres (Ply Rating Marked Series) and Rims for Agricultural Tractors and Machines - Part 4: Tyre Classification and Nomenclature Second Edition Tyres (Ply Rating Marked Series) and Rims for Agricultural Tractors and Machines - Part 5: Log Skidder Tyres Second Edition; Amendment 1-1998 Agricultural Tractors - Operator┤s Workplace, Access and Exit - Dimensions Second Edition Agricultural Tractors - Operator┤s Seating Accommodation - Dimensions Second Edition Agricultural machinery Safety Part 1: General requirements Third Edition Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety - Part 3: Tractors First Edition Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety - Part 5: Power-Driven Soil-Working Equipment First Edition Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety - Part 6: Equipment for Crop Protection First Edition; (Corrected and Reprinted - 1996) Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety - Part 7: Combine Harvesters, Forage and Cotton Harvesters First Edition

ISO ISO ISO ISO ISO

4254-9 4256 4257 4259 4260

ISO ISO

4261 4262

ISO

4263-1

ISO

4263-2

ISO

4263-3

ISO ISO

4263-4 4264

ISO

4266-1

ISO

4266-2

ISO

4266-3

ISO

4266-4

ISO

4266-5

ISO

4266-6

ISO ISO

4267-2 4268

ISO

4269

Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety - Part 9: Equipment for Sowing, Planting and Distributing Fertilizers First Edition Liquefied Petroleum Gases - Determination of Gauge Vapour Pressure - LPG Method Second Edition Liquefied Petroleum Gases - Method of Sampling Second Edition Petroleum Products - Determination and Application of Precision Data in Relation to Methods of Test Third Edition Petroleum Products and Hydrocarbons - Determination of Sulfur Content - Wickbold Combustion Method First Edition Petroleum Products - Fuels (Class F) - Specification of Gas Turbine Fuels for Industrial and Marine Applications First Edition Petroleum Products - Determination of Carbon Residue - Ramsbottom Method Second Edition Petroleum and Related Products - Determination of the Ageing Behaviour of Inhibited Oils and Fluids - TOST Test - Part 1: Procedure for Mineral Oils First Edition; Replaces ISO 4263 Petroleum and Related Products - Determination of the Ageing Behaviour of Inhibited Oils and Fluids - TOST Test Part 2: Procedure for Category HFC Hydraulic Fluids First Edition; Replaces ISO 4263 Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids First Edition Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 4: Procedure for industrial gear oils First Edition Petroleum Products - Calculation of Cetane Index of Middle-Distillate Fuels by the Four-Variable Equation Second Edition Petroluem and Liquid Petroleum Products - Measurement of Level and Temperature in Storage Tanks by Automatic Methods - Part 1: Meassurement of Level in Atmospheric Tanks First Edition Petroleum and Liquid Petroleum Products - Measurement of Level and Temperature in Storage Tanks by Automatic Methods - Part 2: Measurement of Level in Marine Vessels First Edition Petroleum and Liquid Petroleum Products - Measurement of Level and Temperature in Storage Tanks by Automatic Methods - Part 3: Measurement of Level in Pressurized Storage Tanks (Non-Refrigerated) First Edition Petroleum and Liquid Petroleum Products - Measurement of Level and Temperature in Storage Tanks by Automatic Methods - Part 4: Measurement of Temperature in Atmospheric Tanks First Edition Petroleum and Liquid Petroleum Products - Measurement of Level and Temperature in Storage Tanks by Automatic Methods - Part 5: Measurement of Temperature in Marine Vessels First Edition Petroleum and Liquid Petroleum Products - Measurement of Level and Temperature in Storage Tanks by Automatic Methods - Part 6: Measurement of Temperature in Pressurized Storage Tanks (Non-Refrigerated) First Edition Petroleum and Liquid Petroleum Products - Calculation of Oil Quantities - Part 2: Dynamic Measurement First Edition; (CEN EN ISO 4267-2) Petroleum and Liquid Petroleum Products - Temperature Measurements - Manual Methods First Edition Petroleum and Liquid Petroleum Products - Tank Calibration by Liquid Measurement - Incremental Method Using Volumetric Meters First Edition

ISO

4280

ISO ISO ISO ISO

4281 4282 4283 4284

ISO

4287

ISO ISO ISO

4288 4291 4292

ISO

4293

ISO

4294

ISO ISO ISO ISO

4295 4296-1 4296-2 4297

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4298 4299 4301-1 4301-2 4301-3 4301-4 4301-5 4302 4304 4305 4306-1 4306-2

Cryolite, Natural and Artificial, and Aluminium Fluoride for Industrial Use - Determination of Sulphate Content - Barium Sulphate Gravimetric Method First Edition; (Erratum-1978) Sodium Hexafluorosilicate for Industrial Use - Determination of Free Acidity and Total Hexafluorosilicate Content - Titrimetric Method First Edition Acid-Grade and Ceramic-Grade Fluorspar - Determination of Loss in Mass at 105 Degrees C Second Edition Grades of Fluorspar - Determination of Carbonate Content - Titrimetric Method Third Edition Acid-Grade and Ceramic-Grade Fluorspar - Determination Sulfide Content - Iodometric Iodometric Method Third Edition Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Terms, Definitions and Surface Texture Parameters Specification Geometrique Des Produits (GPS) - Etat De Surface: Methode Du Profil - Termes, Definitions Et Parametres D'Etat De Surface First Edition; Technical Corrigendum 1-1998; Corrigendum 2: 2/15/2005 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Rules and Procedures for the Assessment of Surface Texture Second Edition; Technical Corrigendum 1: 06/15/1998 Methods for the Assessment of Departure from Roundness - Measurement of Variations in Radius First Edition Methods for the Assessment of Departure from Roundness - Measurement by Two- and Three-Point Methods First Edition Manganese Ores and Concentrates - Determination of Phosphorus Content - Extraction- Molybdovanadate Photometric Method Firts Edition; Replaces ISO R 321: 1963 Manganese Ores and Concentrates - Determination of Copper Content - Extraction- Spectrometric and Spectrometric Methods Second Edition; Replaces ISO R 322: 1978 Manganese Ores and Concentrates - Determination of Aluminium Content - Photometric and Gravimetric Methods Second Edition; Replaces ISO R 318: 1963 Manganese Ores - Sampling - Part 1: Increment Sampling First Edition Manganese Ores - Sampling - Part 2: Preparation of Samples First Edition Manganese Ores and Concentrates - Methods of Chemical Analysis - General Instructions First Edition Manganese Ores and Concentrates - Determination of Manganese Content - Potentiometric Method Second Edition; Replaces ISO R 319: 1963 Manganese Ores - Determination of Moisture Content Second Edition Cranes and Lifting Appliances - Classification - Part 1: General Second Edition Lifting Appliances - Classification - Part 2: Mobile Cranes First Edition Cranes - Classification - Part 3: Tower Cranes First Edition Cranes and Related Equipment - Classification - Part 4: Jib Cranes First Edition Cranes - Classification - Part 5: Overhead Travelling and Portal Bridge Cranes First Edition Cranes - Wind Load Assessment First Edition Cranes Other Than Mobile and Floating Cranes - General Requirements for Stability First Edition Mobile Cranes - Determination of Stability Second Edition Cranes - Vocabulary - Part 1: General Third Edition Cranes - Vocabulary - Part 2: Mobile Cranes Second Edition

ISO

4306-3

ISO ISO ISO ISO ISO

4306-5 4308-1 4308-2 4309 4310

ISO

4311

ISO

4312

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4313 4314 4315 4316 4317 4318 4319 4320 4321 4322 4323 4324 4325

ISO

4326

ISO ISO

4327 4337

ISO ISO

4341 4342

Cranes - Vocabulary - Part 3: Tower Cranes Third Edition Cranes - Vocabulary - Part 5: Bridge and gantry cranes Appareils de levage Ó charge suspendue Vocabulaire Partie 5: Ponts et portiques roulants First Edition Cranes and Lifting Appliances - Selection of Wire Ropes - Part 1: General Third Edition Cranes and Lifting Appliances - Selection of Wire Ropes - Part 2: Mobile Cranes - Coefficient of Utilization First Edition Cranes Wire ropes Care, maintenance, installation, examination and discard Third Edition Cranes - Test Code and Procedures First Edition Anionic and Non-Ionic Surface Active Agents - Determination of the Critical Micellization Concentration - Method by Measuring Surface Tension with a Plate, Stirrup or Ring First Edition Surface Active Agents - Evaluation of Certain Effects of Laundering - Methods of Analysis and Test for Unsoiled Cotton Control Cloth Second Edition Washing Powders - Determination of Total Phosphorus (V) Oxide Content - Quinoline Phosphomolybdate Gravimetric Method First Edition Surface Active Agents - Determination of Free Alkalinity or Free Acidity - Titrimetric Method First Edition Surface Active Agents - Determination of Alkalinity - Titrimetric Method First Edition Surface Active Agents - Determination of pH of Aqueous Solutions - Potentiometric Method First Edition Surface-Active Agents and Detergents - Determination of Water Content - Karl Fischer Method Second Edition Surface Active Agents and Soaps - Determination of Water Content - Azeotropic Distillation Method Second Edition Surface Active Agents - Detergents for Washing Fabrics - Guide for Comparative Testing of Performance First Edition Non-Ionic Surface Active Agents - Determination of Cloud Point Index - Volumetric Method First Edition; (Erratum-1980) Washing Powders - Determination of Active Oxygen Content - Titrimetric Method First Edition Non-Ionic Surface Active Agents - Determination of Sulphated Ash - Gravimetric Method First Edition Soaps - Determination of Chloride Content - Potentiometric Method First Edition Surface Active Agents - Powders and Granules - Measurement of the Angle of Repose First Edition Soaps and Detergents - Determination of Chelating Agent Content - Titrimetric Method Second Edition Non-Ionic Surface Active Agents - Polyethoxylated Derivatives - Determination of Hydroxyl Value - Acetic Anhydride Method First Edition Non-Ionic Surface Active Agents - Polyalkoxylated Derivatives - Determination of Hydroxyl Value - Phthalic Anhydride Method First Edition; (Erratum-1980) Information Processing - Interchangeable Magnetic Twelve-Disk Pack (100 Mbytes) First Edition Information Processing - Magnetic Tape Cassette and Cartridge Labelling and File Structure for Information Interchange First Edition; (ANSI 4341-1978) Numerical Control of Machines - NC Processor Input - Basic Part Program Reference Language First Edition

ISO ISO

4343 4344

Industrial Automation Systems - Numerical Control of Machines - NC Processor Output - Post-Processor Commands Second Edition Steel wire ropes for lifts Minimum requirements Second Edition

ISO ISO ISO ISO ISO ISO

4345 4346 4347 4348 4354 4355

Steel Wire Ropes - Fibre Main Cores - Specification Second Edition Steel Wire Ropes for General Purposes - Lubricants - Basic Requirements First Edition Leaf chains, clevises and sheaves Dimensions, measuring forces and tensile strengths Fourth Edition Flat-Top Chains and Associated Chain Wheels for Conveyors Second Edition Wind Actions on Structures First Edition Bases for Design of Structures - Determination of Snow Loads on Roofs Second Edition

ISO

4356

ISO ISO

4359 4360

ISO

4362

Bases for the Design of Structures - Deformations of Buildings at the Serviceability Limit States First Edition; (PNS 1091: 1992) Liquid Flow Measurement in Open Channels - Rectangular, Trapezoidal and U-Shaped Flumes First Edition; Technical Corrigendum 1: 10/01/1999 [Superseded: BSI BS 3680 PART 4C] Liquid Flow Measurement in Open Channels by Weirs and Flumes - Triangular Profile Weirs Second Edition Hydrometric Determinations - Flow Measurement in Open Channels Using Structures - Trapezoidal Broad-Crested Weirs Second Edition

ISO

4363

Measurement of liquid flow in open channels Methods for measurement of characteristics of suspended sediment Third Edition

ISO

4364

ISO ISO ISO

4365 4366 4369

ISO ISO ISO ISO ISO

4371 4373 4374 4375 4377

ISO ISO ISO

4378-1 4378-2 4378-3

Measurement of Liquid Flow in Open Channels - Bed Material Sampling Second Edition; Technical Corrigendum 1: 08/01/2000 Liquid flow in open channels Sediment in streams and canals Determination of concentration, particle size distribution and relative density Second Edition Hydrometry ù Echo Sounders For Water Depth Measurements Second Edition Measurement of Liquid Flow in Open Channels - Moving-Boat Method First Edition Measurement of Liquid Flow in Open Channels by Weirs and Flumes - End Depth Method for Estimation of Flow in Non-Rectangular Channels with a Free Overfall (Approximate Method) First Edition Measurement of Liquid Flow in Open Channels - Water-Level Measuring Devices Second Edition Liquid Flow Measurement in Open Channels - Round-Nose Horizontal Broad-Crested Weirs Second Edition Hydrometric Determinations - Cableway Systems for Stream Gauging Second Edition Hydrometric Determinations - Flow Measurement in Open Channels Using Structures - Flat-V Weirs Third Edition Plain Bearings - Terms, Definitions and Classification - Part 1: Design, Bearing Materials and Their Properties Paliers Lisses Termes, Definitions Et Classification - Partie 1: Conception, Materiaux Pour Paliers Et Leurs Proprietes Second Edition; Corrected and Reprinted 02/15/1999 Plain Bearings - Terms, Definitions and Classification - Part 2: Friction and Wear First Edition Plain Bearings - Terms, Definitions and Classification - Part 3: Lubrication First Edition

ISO ISO

4378-4 4379

Plain Bearings - Terms, Definitions and Classification - Part 4: Calculation Parameters and Their Symbol Paliers Lisses - Termes, Definitions Et Classification - Partie 4: Parametres De Calcul Et Leur Symbole First Edition; Corrected and Reprinted, 10/01/1998 Plain Bearings - Copper Alloy Bushes Second Edition (Corrected and Reprinted - 1995)

ISO

4381

Plain Bearings - Lead and Tin Casting Alloys for Multilayer Plain Bearings Third Edition

ISO ISO ISO ISO ISO ISO ISO

4382-1 4382-2 4383 4384-1 4384-2 4385 4386-1

ISO ISO

4386-2 4386-3

ISO

4387

Plain Bearings - Copper Alloys - Part 1: Cast Copper Alloys for Solid and Multilayer Thick- Walled Plain Bearings Second Edition Plain Bearings - Copper Alloys - Part 2: Wrought Copper Alloys for Solid Plain Bearings Second Edition Plain Bearings - Multilayer Materials for Thin-Walled Plain Bearings Third Edition Plain Bearings - Hardness Testing of Bearing Metals - Part 1: Compound Materials Second Edition Plain Bearings - Hardness Testing of Bearing Metals - Part 2: Solid Materials First Edition Plain Bearings - Compression Testing of Metallic Bearing Materials First Edition Plain Bearings - Metallic Multilayer Plain Bearings - Part 1: Non-Destructive Ultrasonic Testing of Bond Second Edition Plain Bearings - Metallic Multilayer Plain Bearings - Part 2: Destructive Testing of Bond for Bearing Metal Layer Thicknesses Greater Than or Equal to 2 mm First Edition Plain Bearings - Metallic Multilayer Plain Bearings - Part 3: Non-Destructive Penetrant Testing First Edition Cigarettes - Determination of Total and Nicotine-Free Dry Particulate Matter Using a Routine Analytical Smoking Machine Third Edition

ISO

4388

Cigarettes - Determination of the Smoke Condensate Retention Index of a Filter - Direct Spectrometric Method Second Edition

ISO

4389

Tobacco and Tobacco Products - Determination of Organochlorine Pesticide Residues - Gas Chromatographic Method Third Edition

ISO

4391

ISO ISO

4392-1 4392-2

Hydraulic Fluid Power - Pumps, Motors and Integral Transmissions - Parameter Definitions and Letter Symbols Second Edition Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 1: At Constant Low Speed and at Constant Pressure Third Edition Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 2: Startability Third Edition

ISO ISO

4392-3 4393

ISO ISO

4394-1 4395

ISO ISO

4397 4399

ISO ISO

4400 4401

Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 3: At Constant Flow and at Constant Torque First Edition Fluid Power Systems and Components - Cylinders - Basic Series of Piston Strokes First Edition Fluid Power Systems and Components - Cylinder Barrels - Part 1: Requirements for Steel Tubes with Specially Finished Bores First Edition Fluid Power Systems and Components - Cylinders - Piston Rod Thread Dimensions and Types First Edition Fluid Power Systems and Components - Connectors and Associated Components - Nominal Outside Diameters of Tubes and Nominal Inside Diameters of Hoses Second Edition Fluid Power Systems and Components - Connectors and Associated Components - Nominal Pressures Second Edition Fluid Power Systems and Components - Three-Pin Electrical Plug Connectors with Earth Contact - Characteristics and Requirements Third Edition Hydraulic fluid power - Four-port directional control valves - Mounting surfaces Third Edition

ISO

4404-1

ISO

4404-2

ISO ISO

4405 4406

ISO

4407

ISO ISO

4409 4411

ISO ISO

4412-1 4412-2

ISO ISO ISO ISO

4412-3 4413 4414 4415

ISO ISO ISO

4416 4417 4418

ISO

4422-1

ISO

4422-2

ISO

4422-3

ISO

4422-4

ISO

4422-5

Petroleum and Related Products - Determination of the Corrosion Resistance of Fire-Resistant Hydraulic Fluids - Part 1: WaterContaining Fluids First Edition; Replaces ISO 4404 Petroleum and related products Determination of the corrosion resistance of fire-resistant hydraulic fluids Part 2: Non-aqueous fluids First Edition; Replaces ISO 4404 Hydraulic Fluid Power - Fluid Contamination - Determination of Particulate Contamination by the Gravimetric Method First Edition Supersedes (NFPA) T2.9.14 Hydraulic Fluid Power - Fluids - Method for Coding the Level of Contamination by Solid Particles Second Edition Hydraulic Fluid Power - Fluid Contamination - Determination of Particulate Contamination by the Counting Method Using an Optical Microscope Second Edition Hydraulic fluid power ù Positive-displacement pumps, motors and integral transmissions ù Methods of testing and presenting basic steady state performance Second Edition Hydraulic Fluid Power - Valves - Determination of Pressure Differential/Flow Characteristics First Edition Hydraulic Fluid Power - Test Code for Determination of Airborne Noise Levels - Part 1: Pumps Second Edition Supersedes (NFPA) B93.71M Hydraulic Fluid Power - Test Code for Determination of Airborne Noise Levels - Part 2: Motors Second Edition Hydraulic Fluid Power - Test Code for Determination of Airborne Noise Levels - Part 3: Pumps - Method Using a Parallelepiped Microphone Array First Edition Hydraulic Fluid Power - General Rules Relating to Systems Second Edition Pneumatic Fluid Power - General Rules Relating to Systems Second Edition Size Designation of Clothes - Men┤s and Boys┤ Underwear, Nightwear and Shirts First Edition; Corrigendum 1: 1990 Size Designation of Clothes - Women┤s and Girls┤ Underwear, Nightwear, Foundation Garments and Shirts First Edition; Corrigendum 1: 1990 Size Designation of Clothes - Headwear First Edition; Amendment Slip: 12-15-1977; Amendment Slip: 05-01-1978 Size Designation of Clothes - Gloves First Edition Pipes and Fittings Made of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Water Supply - Specifications - Part 1: General First Edition; Supersedes ISO 4422: 1990 Pipes and Fittings Made of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Water Supply - Specifications - Part 2: Pipes (With or Without Integral Sockets) First Edition Pipes and Fittings Made of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Water Supply - Specifications - Part 3: Fittings and Joints First Edition; Supersedes ISO 4422: 1990 Pipes and Fittings Made of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Water Supply - Specifications - Part 4: Valves and Ancillary Equipment First Edition; Supersedes ISO 4422: 1990 Pipes and Fittings Made of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Water Supply - Specifications - Part 5: Fitness for Purpose of the System First Edition; Supersedes ISO 4422: 1990

ISO

4427-2

Plastics piping systems ù Polyethylene (PE) pipes and fittings for water supply ù Part 2: Pipes First Edition [Replaced: ISO 4427]

ISO

4427-3

Plastics piping systems ù Polyethylene (PE) pipes and fittings for water supply ù Part 3: Fittings First Edition

ISO

4427-5

ISO

4433-1

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system First Edition Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification - Part 1: Immersion Test Method First Edition; Replaces ISO 4433

ISO

4433-2

Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification - Part 2: Polyolefin Pipes First Edition; Replaces ISO 4433

ISO

4433-3

ISO

4433-4

ISO

4434

ISO ISO ISO ISO ISO

4435 4437 4439 4440-1 4440-2

ISO ISO

4463-1 4463-2

ISO ISO ISO ISO

4463-3 4468 4469 4470

ISO ISO ISO ISO ISO ISO ISO

4471 4472 4473 4474 4475 4476 4480

Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification - Part 3: Unplasticized Poly(Vinyl Chloride) (PVC-U), HighImpact Poly(Vinyl Chloride) (PVC-HI) and Chlorinated Poly(Vinyl Chloride) (PVC-C) Pipes First Edition; Replaces ISO 4433 Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification - Part 4: Poly(Vinylidene Fluoride) (PVDF) Pipes First Edition; Replaces ISO 4433 Unplasticized Polyvinyl Chloride (PVC) Adaptor Fittings for Pipes Under Pressure - Laying Length and Size of Threads - Metric Series First Edition Plastics piping systems for non-pressure underground drainage and sewerage Unplasticized poly(vinyl chloride) (PVC-U) Secon Edition Buried polyethylene (PE) pipes for the supply of gaseous fuels ù Metric series ù Specifications Third Edition Unplasticized Polyvinyl Chloride (PVC) Pipes and Fittings - Determination and Specification of Density First Edition Thermoplastics Pipes and Fittings - Determination of Melt Mass-Flow Rate - Part 1: Test Method First Edition Thermoplastics Pipes and Fittings - Determination of Melt Mass-Flow Rate - Part 2: Test Conditions First Edition Measurement Methods for Building - Setting-Out and Measurement - Part 1: Planning and Organization, Measuring Procedures, Acceptance Criteria First Edition Measurement Methods for Building - Setting-Out and Measurement - Part 2: Measuring Stations and Targets First Edition Measurement Methods for Building - Setting-Out and Measurement - Part 3: Check-Lists for the Procurement of Surveys and Measurement Services First Edition Gear Hobs - Single Start - Accuracy Requirements First Edition Wood - Determination of Radial and Tangential Shrinkage First Edition Sawn Timber - Determination of the Average Moisture Content of a Lot First Edition; (PNS 1007: 1989) Wood - Sampling Sample Trees and Logs for Determination of Physical and Mechanical Properties of Wood in Homogeneous Stands First Edition Coniferous and Broadleaved Sawn Timber - Transportation Packages First Edition Coniferous and Broadleaved Tree Sawlogs - Visible Defects - Classification First Edition Coniferous and Broadleaved Tree Sawlogs - Visible Defects - Terms and Definitions First Edition Coniferous and Broadleaved Tree Sawlogs - Visible Defects - Measurement First Edition Coniferous and Broadleaved Sawlogs - Sizes - Vocabulary First Edition Coniferous Sawlogs - Measurement of Sizes and Determination of Volume First Edition

ISO ISO ISO

4481 4489 4490

ISO

4491-1

ISO

4491-2

ISO

4491-3

ISO

4491-4

ISO

4492

ISO ISO

4496 4497

ISO ISO ISO

4498 4499 4501

ISO ISO ISO

4503 4505 4506

ISO ISO ISO

4507 4510-1 4510-2

ISO ISO ISO

4512 4513 4516

ISO

4518

ISO

4519

Cutlery and Flatware - Nomenclature First Edition; (PNS 889: 1993) Sintered Hardmetals - Sampling and Testing First Edition; (CEN EN 24489: 1993) Metallic Powders - Determination of Flow Time by Means of a Calibrated Funnel (Hall Flowmeter) Second Edition Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 1: General Guidelines First Edition; (CEN EN 24491-1: 1993) Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 2: Loss of Mass on Hydrogen Reduction (Hydrogen Loss) Second Edition Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 3: Hydrogen-Reducible Oxygen Second Edition Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 4: Total Oxygen by Reduction-Extraction First Edition; (CEN EN 24491-4: 1993) Metallic Powders, Excluding Powders for Hardmetals - Determination of Dimensional Changes Associated with Compacting and Sintering Second Edition; (CEN EN 24492: 1993) Metallic Powders - Determination of Acid-Insoluble Content in Iron, Copper, Tin and Bronze Powders First Edition; (CEN EN 24496: 1993) Metallic Powders - Determination of Particle Size by Dry Sieving First Edition; (CEN EN 24497: 1993) Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness First edition; Cancels and Replaces ISO 4498-1: 1990 and ISO 4498-2: 1981 Hardmetals - Metallographic Determination of Microstructure First Edition; (CEN EN 24499: 1993) Hardmetals - Determination of Titanium - Photometric Peroxide Method First Edition; (CEN EN 24501: 1993) Hardmetals - Determination of Contents of Metallic Elements by X-Ray Fluorescence - Fusion Method First Edition; (CEN EN 24503: 1993) Hardmetals - Metallographic Determination of Porosity and Uncombined Carbon First Edition; (CEN EN 24505: 1993) Hardmetals - Compression Test First Edition; (CEN EN 24506:1993) Sintered Ferrous Materials, Carburized or Carbonitrided - Determination and Verification of Case-Hardening Depth by a MicroHardness Test Second Edition Earth-Moving Machinery - Service Tools - Part 1: Common Maintenance and Adjustment Tools Second Edition Earth-Moving Machinery - Service Tools - Part 2: Mechanical Pullers and Pushers Second Edition Petroleum and Liquid Petroleum Products - Equipment for Measurement of Liquid Levels in Storage Tanks - Manual Methods First Edition Road vehicles Visibility Method for establishment of eyellipses for driver┤s eye location Second Edition Metallic and Other Inorganic Coatings - Vickers and Knoop Microhardness Tests Second Edition Metallic Coatings - Measurement of Coating Thickness - Profilometric Method First Edition; (CEN EN ISO 4518: 1995) (PNS 679: 1990) Electrodeposited Metallic Coatings and Related Finishes - Sampling Procedures for Inspection by Attributes First Edition; (Erratum1981) (PNS 674: 1990)

ISO ISO

4520 4521

Chromate Conversion Coatings on Electroplated Zinc and Cadmium Coatings First Edition; (PNS 680: 1990) Metallic Coatings - Electrodeposited Silver and Silver Alloy Coatings for Engineering Purposes First Edition Metallic Coatings - Test Methods for Electrodeposited Silver and Silver Alloy Coatings - Part 1: Determination of Coating Thickness First Edition Metallic Coatings - Test Methods for Electrodeposited Silver and Silver Alloy Coatings - Part 2: Adhesion Tests First Edition Metallic Coatings - Test Methods for Electrodeposited Silver and Silver Alloy Coatings - Part 3: Determination of the Presence of Residual Salts First Edition Metallic Coatings - Electrodeposited Gold and Gold Alloy Coatings for Engineering Purposes First Edition Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 1: Determination of Coating Thickness First Edition Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 2: Mixed Flowing Gas (MFG) Environmental Tests Second Edition Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 3: Electrographic Tests for Porosity First Edition; (Corrected and Reprinted - 1986) Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 4: Determination of Gold Content First Edition Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 5: Adhesion Tests First Edition Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 6: Determination of the Presence of Residual Salts First Edition; (CEN EN ISO 4524-6: 1994) Metallic Coatings - Electroplated Coatings of Nickel Plus Chromium on Plastics Materials Second Edition Metallic coatings Electroplated coatings of nickel for engineering purposes Second Edition

ISO ISO

4522-1 4522-2

ISO ISO

4522-3 4523

ISO

4524-1

ISO

4524-2

ISO

4524-3

ISO ISO

4524-4 4524-5

ISO ISO ISO

4524-6 4525 4526

ISO

4527

ISO ISO

4528 4530

ISO

4531-1

ISO

4531-2

ISO

4532

Vitreous and Porcelain Enamels - Determination of the Resistance of Enamelled Articles to Impact - Pistol Test First Edition

ISO ISO

4533 4534

Vitreous and Porcelain Enamels - Determination of Resistance to Hot Detergent Solutions Used for Washing Textiles First Edition Vitreous and Porcelain Enamels - Determination of Fluidity Behaviour - Fusion Flow Test First Edition

Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods Second Edition Vitreous and Porcelain Enamel Finishes - Selection of Test Methods for Vitreous and Porcelain Enamelled Areas of Articles First Edition Vitreous and Porcelain Enamelled Manufactured Articles - Determination of Resistance to Heat First Edition Vitreous and Porcelain Enamels - Release of Lead and Cadmium from Enamelled Ware in Contact with Food - Part 1: Method of Test First Edition Vitreous and Porcelain Enamels - Release of Lead and Cadmium from Enamelled Ware in Contact with Food - Part 2: Permissible Limits First Edition

ISO ISO ISO ISO ISO

4535 4536 4538 4539 4541

ISO ISO

4543 4545-1

ISO ISO ISO

4545-2 4545-3 4545-4

ISO

4548-1

ISO

4548-2

ISO

4548-3

ISO

4548-4

ISO

4548-5

ISO

4548-6

ISO

4548-7

ISO

4548-9

ISO

4548-11

ISO ISO

4548-12 4551

ISO

4552-1

Vitreous and Porcelain Enamels - Apparatus for Determination of Resistance to Hot Detergent Solutions Used for Washing Textiles First Edition Metallic and Non-Organic Coatings on Metallic Substrates - Saline Droplets Corrosion Test (SD Test) First Edition Metallic Coatings - Thioacetamide Corrosion Test (TAA Test) First Edition; (CEN EN ISO 4538: 1995) Electrodeposited Chromium Coatings - Electrolytic Corrosion Testing (EC Test) First Edition Metallic and Other Non-Organic Coatings - Corrodkote Corrosion Test (CORR Test) First Edition; (CEN EN ISO 4541: 1994) Metallic and Other Non-Organic Coatings - General Rules for Corrosion Tests Applicable for Storage Conditions First Edition; (CEN EN ISO 4543: 1994) Metallic materials Knoop hardness test Part 1: Test method First Edition; Replaces ISO 4545: 1993 Metallic materials Knoop hardness test Part 2: Verification and calibration of testing machines First Edition; Replaces ISO 4546:1993 Metallic materials Knoop hardness test Part 3: Calibration of reference blocks First Edition; Replaces ISO 4547: 1993 Metallic materials Knoop hardness test Part 4: Table of hardness values First Edition; Replaces ISO 10250: 1994 Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 1: Differential Pressure/Flow Characteristics First Edition Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 2: Element By-Pass Valve Characteristics Second Edition Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 3: Resistance to High Pressure and to Elevated Temperature Second Edition Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 4: Initial Particle Retention Efficiency, Life and Cumulative Efficiency (Gravimetric Method) First Edition Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 5: Cold Start Simulation and Hydraulic Pulse Durability Test First Edition Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 6: Static Burst Pressure Test First Edition; Corrigendum 1-1990 Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 7: Vibration Fatigue Test First Edition Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 9: Inlet and Outlet Anti-Drain Valve Tests First Edition; Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 11: Self-Cleaning Filters First Edition Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 12: Filtration Efficiency Using Particle Counting, and Contaminant Retention Capacity First Edition Ferroalloys - Sampling and Sieve Analysis First Edition; (Corrected and Reprinted - 1988) Ferroalloys - Sampling and Sample Preparation for Chemical Analysis - Part 1: Ferrochromium, Ferrosilicochromium, Ferrosilicon, Ferrosilicomanganese, Ferromanganese First Edition

Ferroalloys - Sampling and Sample Preparation for Chemical Analysis - Part 2: Ferrotitanium, Ferromolybdenum, Ferrotungsten, Ferroniobium, Ferrovanadium First Edition Small Craft with Inboard Engine - Propeller Shaft Ends and Bosses with 1:10 Taper Second Edition Shipbuilding Sea-going vessels Windlasses and anchor capstans Third Edition Tyre Valve Threads Filetages De Valves Pour Pneumatiques First Edition; Replaces ISO 4570-1, 4570-2 and 4570-3 Manganese Ores and Concentrates - Determination of Potassium and Sodium Content - Flame Atomic Emission Spectrometric Method First Edition Plastics - PVC Resins for General Use - Determination of Hot Plasticizer Absorption First Edition Plastics ù Poly(vinyl chloride) pastes ù Determination of apparent viscosity using the Severs rheometer Third Edition Plastics - Polymer Dispersions - Determination of Sieve Residue (Gross Particle and Coagulum Content) Second Edition

ISO ISO ISO ISO

4552-2 4566 4568 4570

ISO ISO ISO ISO

4571 4574 4575 4576

ISO ISO

4577 4578

ISO

4581

ISO

4582

ISO

4586-1

High-pressure decorative laminates Sheets made from thermosetting resins Part 1: Classification and specifications Fifth Edition

ISO

4586-2

ISO ISO

4587 4589-1

ISO

4589-2

ISO ISO

4589-3 4590

ISO ISO ISO ISO ISO ISO

4591 4592 4593 4597-1 4602 4603

High-pressure decorative laminates Sheets made from thermosetting resins Part 2: Determination of properties Fifth Edition Adhesives - Determination of Tensile Lap-Shear Strength of Rigid-to-Rigid Bonded Assemblies Third Edition [Replaced: GME GME 60432, GME GME 60432] Plastics - Determination of Burning Behavior by Oxygen Index Part 1: Guidance First Edition Plastics Determination of burning behaviour by oxygen index Part 2: Ambient-temperature test First Edition; Amendment 1: 01/15/2005 Plastics - Determination of Burning Behaviour by Oxygen Index - Part 3: Elevated-Temperature Test First Edition; CEN EN ISO 45893: 1996 Rigid Cellular Plastics - Determination of the Volume Percentage of Open Cells and of Closed Cells Second Edition Plastics - Film and Sheeting - Determination of Average Thickness of a Sample, and Average Thickness and Yield of a Roll, by Gravimetric Techniques (Gravimetric Thickness) Second Edition Plastics - Film and Sheeting - Determination of Length and Width Second Edition Plastics - Film and Sheeting - Determination of Thickness by Mechanical Scanning Second Edition Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation Second Edition Reinforcements - Woven Fabrics - Determination of Number of Yarns per Unit Length of Warp and Weft Second Edition Textile Glass - Woven Fabrics - Determination of Thickness Second Edition

Plastics - Polypropylene and Propylene-Copolymers - Determination of Thermal Oxidative Stability in Air - Oven Method First Edition Adhesives - Determination of Peel Resistance of High-Strength Adhesive Bonds - Floating Roller Method Third Edition Plastics - Styrene/Acrylonitrile Copolymers - Determination of Residual Acrylonitrile Monomer Content - Gas Chromatography Method Second Edition Plastics - Determination of Changes in Colour and Variations in Properties After Exposure to Daylight Under Glass, Natural Weathering or Laboratory Light Sources Second Edition

ISO

4604

Textile Glass - Woven Fabrics - Determination of Conventional Flexural Stiffness - Fixed-Angle Flexometer Method First Edition

ISO

4606

ISO

4608

Textile Glass - Woven Fabric - Determination of Tensile Breaking Force and Elongation at Break by the Strip Method Second Edition Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride for General Use - Determination of Plasticizer Absorption at Room Temperature Third Edition

ISO ISO ISO

4610 4611 4612

Plastics - Vinyl Chloride Homopolymer and Copolymer Resins - Sieve Analysis Using Air-Jet Sieve Apparatus Second Edition Plastics - Determination of the Effects of Exposure to Damp Heat, Water Spray and Salt Mist Second Edition Plastics - Preparation of PVC Pastes for Test Purposes - Planetary-Mixer Method Second Edition

ISO

4613-1

ISO ISO ISO

4613-2 4614 4615

ISO ISO ISO ISO ISO ISO ISO ISO

4618 4619 4620 4621 4622 4623-1 4623-2 4624

Plastics - Ethylene/Vinyl Acetate (E/VAC) Moulding and Extrusion Materials - Part 1: Designation and Specification Second Edition Plastics - Ethylene/Vinyl Acetate (E/VAC) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties Second Edition; (CEN EN ISO 4613-2: 1995) Second Editon; Amendment 1:06/15/2004 Plastics - Malamine-Formaldehyde Moulding - Determination of Extractable Formaldehyde First Edition Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content First Edition Paints and varnishes Terms and definitions Peintures et vernis Termes et dÚfintions First Edition; Replaces ISO 4618-1:1998, ISO 4618-2:1999 and ISO 4618-3:1999 Driers for Paints and Varnishes Second Edition Cadmium Pigments - Specifications and Methods of Test First Edition Chrome Oxide Green Pigments - Specifications and Methods of Test First Edition Paints and Varnishes - Pressure Test for Stackability Second Edition; (CEN EN ISO 4622) Paints and Varnishes - Determination of Resistance to Filiform Corrosion - Part 1: Steel Substrates First Edition Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates First Edition Paints and Varnishes - Pull-Off Test for Adhesion Second Edition

ISO

4625-1

Binders for paints and varnishes Determination of softening point Part 1:Ring-and-ball method First Edition; Replaces ISO 4625

ISO ISO

4625-2 4626

ISO

4628-1

ISO

4628-2

ISO

4628-3

Binders for paints and varnishes Determination of softening point Part 2:Cup-and-ball method First Edition; Replaces ISO 4625 Volatile Organic Liquids - Determination of Boiling Range of Organic Solvents Used as Raw Materials First Edition Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system Third Edition Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering Second Edition Paints and Varnishes - Evaluation of Degradation of Paint Coatings - Designation of Intensity, Quantity and Size of Common Types of Defect - Part 3: Designation of Degree of Rusting First Edition Second Edition

ISO

4628-4

ISO

4628-5

ISO

4628-6

ISO

4628-7

ISO

4628-8

ISO ISO

4628-10 4629

ISO ISO

4630-1 4630-2

ISO

4633

ISO ISO ISO ISO ISO

4635 4637 4638 4641 4642

ISO

4643

ISO ISO ISO

4645 4646 4647

ISO ISO ISO

4649 4650 4651

ISO

4652-1

Paints and Varnishes - Evaluation of Degradation of Coatings - Designation of Quantity and Size of Defects, and of Intensity of Uniform Changes in Appearance - Part 4: Assessment of Degree of Cracking Second Edition Paints and Varnishes - Evaluation of Degradation of Coatings - Designation of Quantity and Size of Defects, and of Intesity of Uniform Changes in Appearance - Part 5: Assessment of Degree of Flaking Second Edition Paints and varnishes ù Evaluation of degradation of coatings ù Designation of quantity and size of defects, and of intensity of uniform changes in appearance ù Part 6: Assessment of degree of chalking by tape method Second Edition Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 7: Assessment of degree of chalking by velvet method First Edition Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 8: Assessment of degree of delamination and corrosion around a scribe First edition Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 10: Assessment of degree of filiform corrosion First Edition Binders for Paints and Varnishes - Determination of Hydroxyl Value - Titrimetric Method Second Edition Clear liquids Estimation of colour by the Gardner colour scale Part 1: Visual method First Edition; Cancels and Replaces ISO 4630:1997 Clear liquids Estimation of colour by the Gardner colour scale Part 2: Spectrophotometric method First Edition Rubber Seals - Joint Rings for Water Supply, Drainage and Sewerage Pipelines - Specification for Materials Third Edition; Corrected Version: 04/01/2004 Rubber, Vulcanized - Preformed Compression Seals for Use Between Concrete Motorway Paving Sections - Specification for Material First Edition Rubber-Coated Fabrics - Determination of Rubber-to-Fabric Adhesion - Direct Tension Method First Edition Polymeric Materials, Cellular Flexible - Determination of Air Flow Permeability First Edition Rubber hoses and hose assemblies for water suction and discharge - Specification Third Edition Rubber Products - Hoses, Non-Collapsible, for Fire-Fighting Service First Edition Moulded Plastics Footwear - Lined or Unlined Poly (Vinyl Chloride) Boots for General Industrial Use - Specification Second Edition Rubber and Rubber Products - Guide to the Identification of Antidegradants - Thin Layer Chromatographic Methods First Edition; Corrigendum 1: 1991 Rubber- or Plastics-Coated Fabrics - Low-Temperature Impact Test Second Edition Rubber, Vulcanized - Determination of Static Adhesion to Textile Cord - H-Pull Test First Edition Rubber, Vulcanized or Thermoplastic - Determination of Abrasion Resistance Using a Rotating Cylindrical Drum Device Second Edition Rubber - Identification - Infrared spectrometric method Second Edition Cellular rubbers and plastics Determination of dynamic cushioning performance Second Edition; Amendment 1: 09/15/2006 Rubber Compounding Ingredients - Carbon Black - Determination of Specific Surface Area by Nitrogen Adsorption Methods - Part 1: Single-Point Procedures First Edition

ISO

4655

ISO ISO ISO ISO ISO ISO ISO

4656 4658 4659 4660 4661-2 4662 4664-1

ISO ISO

4664-2 4665

ISO

4666-1

ISO

4666-2

ISO ISO ISO ISO ISO ISO

4666-3 4671 4672 4674-1 4674-2 4675

Rubber - Reinforced Styrene-Butadiene Latex - Determination of Total Bound Styrene Content Second Edition Rubber compounding ingredients ù Carbon black ù Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN) First Edition [Replaced: ISO 4656-1, ISO 4656-2, ISO 6894] Acrylonitrile-Butadiene Rubber (NBR) - Evaluation Procedure Third Edition; Amendment 1:10/15/2004 Syrene-Butadiene Rubber (Carbon Black or Carbon Black and Oil Masterbatches) - Evaluation Procedure Fifth Edition Rubber, Raw Natural - Colour Index Test Third Edition Rubber, Vulcanized - Preparation of Samples and Test Pieces - Part 2: Chemical Tests First Edition Rubber - Determination of Rebound Resilience of Vulcanizates Second Edition Rubber, vulcanized or thermoplastic Determination of dynamic properties Part 1: General guidance First edition Rubber, vulcanized or thermoplastic Determination of dynamic properties Part 1: General guidance First Edition;:1986 [Replaced: ISO 4663] Rubber, Vulcanized and Thermoplastic - Resistance to Weathering Second Edition Rubber, Vulcanized - Determination of Temperature Rise and Resistance to Fatigue in Flexometer Testing - Part 1: Basic Principles First Edition Rubber, Vulcanized - Determination of Temperature Rise and Resistance to Fatique in Flexometer Testing - Part 2: Rotary Flexometer First Edition Rubber, Vulcanized - Determination of Temperature Rise and Resistance to Fatigue in Flexometer Testing - Part 3: Compression Flexometer First Edition Rubber and Plastics Hose and Hose Assemblies - Methods of Measurement of Dimensions Second Edition Rubber and Plastics Hoses - Sub-Ambient Temperature Flexibility Tests Third Edition Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods First Edition Rubber- or Plastics-Coated Fabrics - Determination of Tear Resistance - Part 2: Ballistic Pendulum Method First Edition Rubber- or Plastics-Coated Fabrics - Low-Temperature Bend Test Second Edition

ISO

4677-1

Atmospheres for Conditioning and Testing - Determination of Relative Humidity - Part 1: Aspirated Psychrometer Method First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4677-2 4683-1 4683-2 4684 4687-1 4688-1 4689 4689-2 4689-3 4691

Atmospheres for Conditioning and Testing - Determination of Relative Humidity - Part 2: Whirling Psychrometer Method First Edition Raw Sheep Skins - Part 1: Descriptions of Defects First Edition Raw Sheep Skins - Part 2: Designation and Presentation First Edition Leather - Chemical Tests - Determination of Volatile Matter First Edition Iron Ores - Determination of Phosphorus Content - Part 1: Molybdenum Blue Spectrophotometric Method First Edition Iron Ores - Determination of Aluminium Content - Part 1: Flame Atomic Absorption Spectrometric Method Second Edition Iron Ores - Determination of Sulfur Content - Barium Sulfate Gravimetric Method First Edition Iron ores Determination of sulfur content Part 2: Combustion/titration method First Edition [Cancelled: ISO 4690] Iron ores Determination of sulfur content Part 3: Combustion/infrared method First Edition [Cancelled: ISO 4690] Iron Ores - Determination of Titanium Content - Diantipyrylmethane Spectrophotometric Method First Edition

ISO ISO

4694 4695

ISO ISO ISO ISO ISO

4696-1 4696-2 4698 4700 4701

ISO ISO ISO ISO ISO

4703 4704 4706 4707 4708

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4709 4710 4711 4714 4715 4716 4718 4719 4720 4724 4725 4727 4728 4729 4730 4731 4733 4735 4736

ISO

4739

Iron Ores - Determination of Fluorine Content - Ion-Selective Electrode Method First Edition Iron Ores - Determination of Reducibility Second Edition Iron Ores - Static Test for Low-Temperature Reduction-Disintegration - Part 1: Reaction with CO, CO2 and H2 First Edition; Cancels and Replaces 4696 Iron Ores - Static Test for Low-Temperature Reduction-Disintegration - Part 2: Reaction with CO First Edition Iron Ore Pellets - Determination of Relative Free-Swelling Index First Edition Iron ore pellets for blast furnace and direct reduction feedstocks ù Determination of the crushing strength Third edition Iron Ores - Determination of Size Distribution by Sieving Second Edition Test Conditions for Surface Grinding Machines with Two Columns - Machines for Grinding Slideways - Testing of Accuracy Third Edition Glass Plant, Pipeline and Fittings - Glass Plant Components First Edition; (Erratum-1979) Refillable Welded Steel Gas Cylinders First Edition; (PNS 03: 1992) Cork - Stoppers - Sampling for Inspection of Dimensional Characteristics First Edition Composition Cork - Gasket Material - Test Methods Second Edition Composition Cork - Gasket Material - Classification System, Requirements, Sampling, Packaging and Marking Second Edition Cork - Cylindrical Stoppers for Sparkling Wines and Gasified Wines - Characteristics Second Edition Agglomerated Cork Discs - Specifications First Edition Composition Cork - Specifications, Sampling, Packaging and Marking Second Edition Essential Oils - Quantitative Evaluation of Residue on Evaporation First Edition Oil of Vetiver (Vetiveria Zizanioides (L.) Nash) Second Edition Oil of Lemongrass [Cymbopogon Flexuosus (Nees ex Steudel) J.F. Watson] Second Edition Oil of Spike Lavender (Lavandula Latifolia (L.f.) Medikus), Spanish Type Second Edition Essential Oils - Nomenclature First Edition Second Edition Oil of cedarwood, Virginian (Juniperus virginiana L.) Second Edition Oil of Cedarwood, Texas (Juniperus Mexicana Schiede) Second Edition Oil of Palmarosa (Cymbopogon Martinii (Roxburgh) W. Watson Var. Motia) First Edition Oil of Spanish Wild Margoram (Thumus Mastichina L.) Second Edition Oil of Pimento Leaf (Pimenta Dioica (Linnaeus) Merrill) First Edition Oil of Melaleuca, Terpinen-4-ol Type (Tea Tree Oil) Second Edition Oil of geranium (Pelargonium X ssp.) Second Edition Oil of cardamom [Elettaria cardamomum (L.) Maton] Second Edition Oils of Citrus - Determination of CD Value by Ultraviolet Spectrophotometric Analysis Second Edition Fire Tests - Small Chimneys - Testing at Elevated Temperatures First Edition Wrought Copper and Copper Alloy Products - Selection and Preparation of Specimens and Test Pieces for Mechanical Testing First Edition

ISO ISO ISO ISO

4740 4741 4742 4743

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4744 4746 4748 4749 4751 4753 4755 4757 4759-1 4759-3 4762 4766

ISO ISO ISO ISO

4775 4778 4779 4782

ISO

4783-1

ISO

4783-2

ISO ISO ISO ISO ISO ISO

4783-3 4785 4786 4787 4788 4790

ISO ISO

4791-1 4793

Copper and Copper Alloys - Determination of Zinc Content - Flame Atomic Absorption Spectrometric Method First Edition Copper and Copper Alloys - Determination of Phosphorus Content - Molybdovanadate Spectrometric Method First Edition Copper Alloys - Determination of Nickel Content - Gravimetric Method First Edition Copper Alloys - Determination of Nickel Content - Titrimetric Method First Edition Copper and Copper Alloys - Determination of Chromium Content - Flame Atomic Absorption Spectrometric Method First Edition Oxygen-Free Copper - Scale Adhesion Test First Edition Copper Alloys - Determination of Iron Content - Na2EDTA Titrimetric Method First Edition Copper Alloys - Determination of Lead Content - Flame Atomic Absorption Spectrometric Method First Edition Copper and Copper Alloys - Determination of Tin Content - Spectrometric Method First Edition Fasteners - Ends of Parts with External ISO Metric Thread Second Edition Fasteners - Thread Undercuts for External Metric ISO Threads First Edition Cross Recesses for Screws First Edition Tolerances for Fasteners - Part 1: Bolts, Screws Studs and Nuts - Product Grades A, B and C Second Edition Tolerances for Fasteners - Part 3: Plain Washers for Bolts, Screws and Nuts - Product Grades A and C Third Edition Hexagon socket head cap screws Fourth Edition Slotted Set Screws with Flat Point First Edition; (NZS/ISO 4766: 1983) Hexagon Nuts for High-Strength Structural Bolting with Large Width Across Flats - Product Grade B - Property Classes 8 and 10 First Edition Chain Slings of Welded Construction - Grades M (4), S (6) and T (8) First Edition Forged Steel Lifting Hooks with Point and Eye for Use with Steel Chains of Grade M(4) First Edition Metal Wire for Industrial Wire Screens and Woven Wire Cloth Second Edition Industrial Wire Screens and Woven Wire Cloth - Guide to the Choice of Aperture Size and Wire Diameter Combinations - Part 1: Generalities Second Edition Industrial Wire Screens and Woven Wire Cloth - Guide to the Choice of Aperture Size and Wire Diameter Combinations - Part 2: Preferred Combinations for Woven Wire Cloth Second Edition Industrial Wire Screens and Woven Wire Cloth - Guide to the Choice of Aperture Size and Wire Diameter Combinations - Part 3: Preferred Combinations for Pre-Crimped or Pressure-Welded Wire Screens First Edition Laboratory Glassware - Straight-Bore Glass Stopcocks for General Purposes First Edition Enclosed-Scale Adjustable-Range Thermometers First Edition Laboratory Glassware - Volumetric Glassware - Methods for Use and Testing of Capacity First Edition Laboratory glassware - Graduated measuring cylinders Second edition Glass-to-Glass Sealings - Determination of Stresses First Edition Laboratory Apparatus - Vocabulary Relating to Apparatus Made Essentially from Glass, Porcelain or Vitreous Silica - Part 1: Names for Items of Apparatus First Edition Laboratory Sintered (Fritted) Filters - Porosity Grading, Classification and Designation First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4794 4795 4796-1 4796-2 4796-3 4797 4798 4799 4800 4801

ISO

4802-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4802-2 4803 4805 4814 4815 4817 4818 4819 4823 AMD 1 4823 CORR 1 4823

ISO

4829-1

ISO

4829-2

ISO

4831

ISO

4832

ISO

4833

Laboratory Glassware - Methods for Assessing Chemical Resistance of Enamels Used for Colour Coding and Colour Marking First Edition Glass for Thermometer Bulbs First Edition Laboratory Glassware - Bottles - Part 1: Screw-Neck Bottles First Edition Laboratory Glassware - Bottles - Part 2: Conical Neck Bottles First Edition Laboratory Glassware - Bottles - Part 3: Aspirator Bottles First Edition Laboratory glassware Boiling flasks with conical ground joints Second Edition Laboratory Glassware - Filter Funnels First Edition Laboratory Glassware - Condensers First Edition Laboratory Glassware - Separating Funnels and Dropping Funnels Second Edition Glass Alcoholometers and Alcohol Hydrometers Not Incorporating a Thermometer First Edition; (Erratum-1980) Glassware - Hydrolytic Resistance of the Interior Surfaces of Glass Containers - Part 1: Determination by Titration Method and Classification First Edition Glassware - Hydrolytic Resistance of the Interior Surfaces of Glass Containers - Part 2: Determination by Flame Spectrometry and Classification First Edition Laboratory Glassware - Borosilicate Glass Tubing First Edition Laboratory Glassware - Thermo-Alcoholometers and Alcohol- Thermohydrometers First Edition Household Sewing Machines - Determination of Stability of Needle Thread Tension First Edition Household Sewing Machines - Determination of Sewing Capacity First Edition Household Sewing Machines - Determination of Directional Stability (Drift) First Edition Household Sewing Machines - Determination of Creep of One Ply of Material over Another First Edition Household Sewing Machines - Determination of Reproducibility of Stitch Length Setting First Edition Dentistry ù Elastomeric impression materials AMENDMENT 1 Third Edition Dentistry ù Elastomeric impression materials TECHNICAL CORRIGENDUM 1 Third Edition Dentistry - Elastometric Impression Materials Third Edition Steel and Cast Iron - Determination of Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method - Part 1: Silicon Contents Between 0,05 and 1,0 % First Edition; (CEN EN 24 829 Part 1: 1990) Steel and Iron - Determination of Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method - Part 2: Silicon Contents Between 0,01 and 0,05% First Edition; (CEN EN 24 829 Part 2: 1990) Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of coliforms Most probable number technique Third Edition;: 1986 [Replaced: ISO 5541-2] Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of coliforms Colony-count technique Third Edition; Supersedes ISO 5541-1: 1986 Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Microorganisms - Colony-Count Technique at 30 Degrees Celcius Third Edition

ISO ISO

4834 4849

Cinematography - Magnetic Sound Test Films Excluding Striped Release Prints - Basic Technical Characteristics Second Edition Personal Eye-Protectors - Specifications First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4850 4851 4852 4854 4855 4856 4858 4859 4860 4863

ISO ISO ISO

4866 4867 4868

ISO

4869-1

ISO

4869-2

ISO ISO

4869-3 4871

ISO ISO ISO

4872 4873 4874

Personal Eye-Protectors for Welding and Related Techniques - Filters - Utilisation and Transmittance Requirements First Edition Personal Eye-Protectors - Ultra-Violet Filters - Utilisation and Transmittance Requirements First Edition Personal Eye-Protectors - Infra-Red Filters - Utilisation and Transmittance Requirements First Edition Personal Eye-Protectors - Optical Test Methods First Edition Personal Eye-Protectors - Non-Optical Test Methods First Edition Personal Eye-Protectors - Synoptic Tables of Requirements for Oculars and Eye-Protectors First Edition Wood - Determination of Volumetric Shrinkage First Edition Wood - Determination of Radial and Tangential Swelling First Edition Wood - Determination of Volumetric Swelling First Edition Resilient Shaft Couplings - Information to Be Supplied by Users and Manufacturers First Edition Mechanical Vibration and Shock - Vibration of Buildings - Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Buildings First Edition; Amendment 1-1994; PNS 1092:1992; Amendment 2-1996 Code for the Measurement and Reporting of Shipboard Vibration Data First Edition Code for the Measurement and Reporting of Local Vibration Data of Ship Structures and Equipment First Edition Acoustics - Hearing Protectors - Part 1: Subjective Method for the Measurement of Sound Attenuation First Edition; (CEN EN 248691: 1992) Acoustics Hearing protectors Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn First Edition; Technical Corrigendum 1: 09/15/2006 Acoustics ù Hearing protectors ù Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture First Edition [Cancelled: ISO TR 4869-3] Acoustics - Declaration and Verification of Noise Emission Values of Machinery and Equipment Second Edition Acoustics - Measurement of Airborne Noise Emitted by Construction Equipment Intended for Outdoor Use - Method for Determining Compliance with Noise Limits First Edition; (Erratum-1979) (SAE J 2101) Information Technology - ISO 8-Bit Code for Information Interchange - Structure and Rules for Implementation Third Edition Tobacco - Sampling of Batches of Raw Material - General Principles Second Edition

ISO ISO ISO ISO

4875-1 4875-2 4875-3 4876

ISO

4880

Metal-cutting band saw blades Part 1: Vocabulary Lames de scies Ó ruban Ó mÚtaux Partie 1: Vocabulaire Second Edition Metal-cutting band saw blades Part 2: Characteristics and dimensions Second Edition Metal Cutting Band Saw Blades - Part 3: Characteristics Relating to Each Type of Blade First Edition Tobacco and Tobacco Products - Determination of Maleic Hydrazide Residues First Edition Burning Behaviour of Textiles and Textile Products - Vocabulary Comportement Au Feu Des Textiles Et Des Produits Textiles Vocabulaire Second Edition

ISO

4882

ISO ISO ISO ISO ISO ISO

4883 4884 4885 4892-1 4892-2 4892-3

ISO ISO

4892-4 CORR 1 4892-4

ISO

4894-1

ISO ISO

4894-2 4895

ISO ISO ISO ISO

4897 4898 4899 4900

ISO

4901

ISO

4902

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4903 4909 4911 4912 4913 4915 4916 4919 4920 4921

Office Machines and Data Processing Equipment - Line Spacings and Character Spacings First Edition Hardmetals - Determination of Contents of Metallic Elements by X-Ray Fluorescence - Solution Method First Edition; (CEN EN 24883: 1993) Hardmetals - Sampling and Testing of Powders Using Sintered Test Pieces First Edition; (CEN EN 24884: 1993) Ferrous Products - Heat Treatments - Vocabulary First Edition Plastics - Methods of Exposure to Laboratory Light Sources - Part 1: General Guidance Second Edition Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps Second Edition Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps Second Edition Plastics ù Methods of exposure to laboratory light sources ù Part 4: Open-flame carbon-arc lamps TECHNICAL CORRIGENDUM 1 Second Edition Plastics ù Methods of exposure to laboratory light sources ù Part 4: Open-flame carbon-arc lamps Second Edition Plastics - Styrene/Acrylonitrile (SAN) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Third Edition Plastics - Styrene/ Acrylonitrile (SAN) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties Second Edition Plastics - Liquid Epoxide Resins - Determination of Tendency to Crystallize Second Edition Cellular Plastics - Determination of the Coefficient of Linear Thermal Expansion of Rigid Materials at Sub-Ambient Temperatures First Edition Rigid cellular plastics Thermal insulation products for buildings Specifications Third Edition Textile-Glass-Reinforced Thermosetting Plastics - Properties and Test Methods Second Edition Textile Glass - Mats and Fabrics - Determination of Contact Mouldability First Edition Reinforced Plastics Based on Unsaturated Polyester Resins - Determination of Residual Styrene Monomer Content First Edition; (AS/NZS 4257.8: 1994) Information Technology - Data Communication - 37-Pole DTE/DCE Interface Connector and Contact Number Assignments Second Edition; AS/NZS 3612: 1994 Information Technology - Data Communication - 15-Pole DTE/DCE Interface Connector and Contact Number Assignments Second Edition; NZS/ISO 4903: 1989; CAN/CSA-ISO 4903-95 Identification cards Financial transaction cards Magnetic stripe data content for track 3 First Edition Textiles - Cotton Fibres - Equipment and Artificial Lighting for Cotton Classing Rooms First Edition Textiles - Cotton Fibres - Evaluation of Maturity - Microscopic Method First Edition Textiles - Cotton Fibres - Determination of Length (Span Length) and Uniformity Index First Edition Textiles - Stitch Types - Classification and Terminology Second Edition; (PNS 1216: 1994) Textiles - Seam Types - Classification and Terminology Second Edition Carpets - Determination of Tuft Withdrawal Force First Edition Textile Fabrics - Determination of Resistance to Surface Wetting (Spray Test) First Edition Knitting - Basic Concepts - Vocabulary Tricotage - Notions De Base - Vocabulaire Second Edition

ISO ISO

4925 4926

ISO

4927

ISO

4928

ISO

4929

ISO ISO

4930 4934

ISO ISO ISO

4935 4937 4938

ISO ISO ISO ISO

4939 4940 4941 4942

ISO ISO

4943 4945

ISO ISO

4946 4947

ISO

4948-1

ISO ISO

4948-2 4950-1

ISO

4950-2

ISO

4950-3

Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems Second Edition Road vehicles Hydraulic braking systems Non-petroleum-base reference fluids Second Edition Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 ░C max.) Second Edition Road Vehicles - Elastomeric Cups and Seals for Cylinders for Hydraulic Braking Systems Using a Non-Petroleum Base Hydraulic Brake Fluid (Service Temperature 120 Degrees Celsius Maximum) Third Edition Road Vehicles - Diaphragm Gaskets for Hydraulic Brake Master Cylinder Reservoirs Using a Non-Petroleum Base Hydraulic Brake Fluid First Edition Road vehicles Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 ░C max.) Second Edition Steel and iron Determination of sulfur content Gravimetric method Second Edition Steel and Iron - Determination of Sulfur Content - Infrared Absorption Method After Combustion in an Induction Furnace First Edition; (Corrected and Reprinted - 1990) (AS/NZS 1050.16: 1994) Steel and Iron - Determination of Chromium Content - Potentiometric or Visual Titration Method First Edition Steel and Iron - Determination of Nickel Content - Gravimetric or Titrimetric Method First Edition Steel and Cast Iron - Determination of Nickel Content - Dimethylglyoxime Spectrophotometric Method First Edition; (Corrected and Reprinted - 1986) Steel and Cast Iron - Determination of Nickel Content - Flame Atomic Absorption Spectrometric Method First Edition Steels and Iron - Determination of Molybdenum Content - Thiocyanate Spectrophotometric Method Second Edition Steel and Iron - Determination of Vanadium Content - N-BPHA Spectrophotometric Method First Edition Steel and Cast Iron - Determination of Copper Content - Flame Atomic Absorption Spectrometric Method First Edition; (AS/NZS 1050.37: 1994) Steel - Determination of Nitrogen Content - Spectrophotometric Method First Edition; (Erratum-1979) Steel and Cast Iron - Determination of Copper Content - 2,2┤- Diquinolyl Spectrophotometric Method First Edition; (Corrected and Reprinted - 1986) Steel and Cast Iron - Determination of Vanadium Content - Potentiometric Titration Method First Edition Steels - Classification - Part 1: Classification of Steels into Unalloyed and Alloy Steels Based on Chemical Composition First Edition Steels - Classification - Part 2: Classification of Unalloyed and Alloy Steels According to Main Quality Classes and Main Property or Application Characteristics First Edition High Yield Strength Flat Steel Products - Part 1: General Requirements Second Edition; AMENDMENT 1: 12/01/2003 High Yield Strength Flat Steel Products - Part 2: Products Supplied in the Normalized or Controlled Rolled Condition Second Edition; AMENDMENT 1: 12/01/2003 High Yield Strength Flat Steel Products - Part 3: Products Supplied in the Heat-Treated (Quenched + Tempered) Condition Second Edition; AMENDMENT 1: 12/01/2003

ISO

4951-1

ISO

4951-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

4951-3 4952 4954 4955 4957 4960 4965 4967 4968 4969 4970 4978 4986 4987 4990 4991 4992-1 4992-2 4993 4995 4996 4997 4998

ISO

4999

High Yield Strength Steel Bars and Sections - Part 1: General Delivery Requirements First Edition; Together with ISO 4951-2 and ISO 4951-3, Cancels and Replaces ISO 4951: 1979 High Yield Strength Steel Bars and Sections - Part 2: Delivery Conditions for Normalized, Normalized Rolled and As-Rolled Steels First Edition High Yield Strength Steel Bars and Sections - Part 3: Delivery Conditions for Thermomechanically-Rolled Steels First Edition; Together with ISO 4951-1 and ISO 4951-2, Cancels and Replaces ISO 4951: 1979 Structural steels with improved atmospheric corrosion resistance Third Edition Steels for Cold Heading and Cold Extruding Second Edition Heat-resisting steels Third edition Tool Steels Second Edition Cold-Reduced Carbon Steel Strip with a Carbon Content over 0,25% Second Edition Axial Load Fatigue Testing Machines - Dynamic Force Calibration - Strain Gauge Technique First Edition Steel - Determination of Content of Non-Metallic Inclusions - Micrographic Method Using Standard Diagrams Second Edition Steel - Macrographic Examination by Sulphur Print (Baumann Method) First Edition Steel - Macroscopic Examination by Etching with Strong Mineral Acids First Edition Steel - Determination of Total or Effective Thickness of Thin Surface-Hardened Layers First Edition Flat Rolled Steel Products for Welded Gas Cylinders First Edition; (PNS 869: 1992) Steel Castings - Magnetic Particle Inspection First Edition Steel Castings - Penetrant Inspection First Edition Steel Castings - General Technical Delivery Requirements Second Edition Steel Castings for Pressure Purposes Second Edition Steel castings Ultrasonic examination Part 1: Steel castings for general purposes First Edition Steel castings Ultrasonic examination Part 2: Steel castings for highly stressed components First Edition Steel Castings - Radiographic Inspection First Edition Hot-Rolled Steel Sheet of Structural Quality Fourth Edition Hot-Rolled Steel Sheet of High Yield Stress Structural Quality Fourth Edition Cold-reduced carbon steel sheet of structural quality Fourth Edition Continuous hot-dip zinc-coated carbon steel sheet of structural quality Fourth Edition Continuous Hot-Dip Terne (Lead Alloy) Coated Cold-Reduced Carbon Steel Sheet of Commercial, Drawing and Structural Qualities Fourth Edition

ISO ISO

5000 5001

Continuous hot-dip aluminium-siliconcoated cold-reduced carbon steel sheet of commercial and drawing qualities Third Edition Cold-Reduced Carbon Steel Sheet for Vitreous Enamelling Fourth Edition

ISO

5002

Hot-Rolled and Cold-Reduced Electrolytic Zinc-Coated Carbon Steel Sheet of Commercial and Drawing Qualities First Edition

ISO ISO

5003 5005

ISO ISO

5006 5007

ISO ISO ISO

5008 CORR 1 5008 5010

ISO ISO

5011 5013

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

5014 5016 5017 5018 5019-1 5019-2 5019-3 5019-4 5019-5 5019-6 5022 5024 5025

ISO

5031

ISO

5048

ISO

5049-1

ISO ISO

5050 5051

Flat Bottom Railway Rails and Special Rail Sections for Switches and Crossings of Non-Treated Steel - Technical Delivery Requirements First Edition Earth-Moving Machinery - Method for Locating the Centre of Gravity First Edition; (SAE J 874-1993) Earth-moving machinery Operator's field of view Test method and performance criteria First Edition; Replaces ISO 5006-1:1991, ISO 5006-2:1993 and ISO 5006-3:1993 [Superseded: ISO 5006-1] Agricultural Wheeled Tractors - Operator┤s Seat - Laboratory Measurement of Transmitted Vibration Second Edition Agricultural wheeled tractors and field machinery ù Measurement of whole-body vibration of the operator TECHNICAL CORRIGENDUM 1 Second Edition Agricultural wheeled tractors and field machinery ù Measurement of whole-body vibration of the operator Second Edition Earth-moving machinery ù Rubber-tyred machines ù Steering requirements Third Edition Inlet Air Cleaning Equipment for Internal Combustion Engines and Compressors - Performance Testing Second Edition * Corrected and Reprinted 07/15/2001 Refractory Products - Determination of Modulus of Rupture at Elevated Temperatures First Edition Dense and Insulating Shaped Refactory Products - Determination of Modulus of Rupture at Ambient Temperature Second Edition Shaped Insulating Refractory Products - Determination of Bulk Density and True Porosity Second Edition Dense Shaped Refractory Products - Determination of Bulk Density, Apparent Porosity and True Porosity Second Edition Refractory Materials - Determination of True Density First Edition Refractory Bricks - Dimensions - Part 1: Rectangular Bricks First Edition Refractory Bricks - Dimensions - Part 2: Arch Bricks First Edition Refractory Bricks - Dimensions - Part 3: Rectangular Checker Bricks for Regenerative Furnaces First Edition Refractory Bricks - Dimensions - Part 4: Dome Bricks for Electric Arc Furnace Roofs Second Edition Refractory Bricks - Dimensions - Part 5: Skewbacks First Edition Refractory Bricks - Dimensions - Part 6: Basic Bricks for Oxygen Steel-Making Converters Second edition Shaped Refractory Products - Sampling and Acceptance Testing First Edition Petroleum Liquids and Liquefied Petroleum Gases - Measurement - Standard Reference Conditions Second Edition Reinforcement Products - Woven Fabrics - Determination of Width and Length Second Edition Continuous Mechanical Handling Equipment for Loose Bulk Materials - Couplings and Hose Components Used in Pneumatic Handling - Safety Code First Edition Continuous Mechanical Handling Equipment - Belt Conveyors with Carrying Idlers - Calculation of Operating Power and Tensile Forces Second Edition Mobile Equipment for Continuous Handling of Bulk Materials - Part 1: Rules for the Design of Steel Structures Second Edition Continuous Mechanical Handling Equipment - Vertical Bucket Elevators with Calibrated Round Steel Link Chains - General Characteristics First Edition Continuous Mechanical Handling Equipment - Deep Elevator Bucket with Flat Rear Wall - Main Dimensions First Edition

ISO ISO ISO ISO ISO

5053 5057 5061 5065-1 5065-2

ISO ISO

5066-1 5066-2

ISO

5068-1

ISO

5068-2

ISO

5069-1

ISO

5069-2

ISO ISO ISO ISO ISO

5071-1 5072 5073 5074 5077

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

5079 5080 5084 5085-1 5086 5089 5122 5123 5127 5128 5129 5130

Powered Industrial Trucks - Terminology First Edition Industrial Trucks - Inspection and Repair of Fork Arms in Service on Fork-Lift Trucks First Edition; Animal Feeding Stuffs - Determination of Castor Oil Seed Husks - Microscope Method Second Edition Aircraft - Magnetic Indicators - Part 1: Characteristics First Edition Aircraft - Magnetic Indicators - Part 2: Tests First Edition Aircraft - Hermetically Sealed Monostable Electrical Relays, 2A and 3A - Part 1: Operating Characteristics and Test Conditions First Edition Aircraft - Hermetically Sealed Monostable Electrical Relays, 2A and 3A - Part 2: Type Approval Tests First Edition Brown coals and lignites ù Determination of moisture content ù Part 1: Indirect gravimetric method for total moisture First Edition [Superseded: ISO 5068] Brown coals and lignites ù Determination of moisture content ù Part 2: Indirect gravimetric method for moisture in the analysis sample First Edition [Superseded: ISO 5068] Brown Coals and Lignites - Principles of Sampling - Part 1: Sampling for Determination of Moisture Content and for General Analysis First Edition Brown Coals and Lignites - Principles of Sampling - Part 2: Sample Preparation for Determination of Moisture Content and for General Analysis First Edition Brown Coals and lignites - Determination of the Volatile Matter in the Analysis Sample - Part 1: Two-Furnace Method First Edition Brown Coals and Lignites - Determination of True Relative Density and Apparent Relative Density First Edition Brown Coals and Lignites - Determination of Humic Acids Second Edition Hard Coal - Determination of Hardgrove Grindability Index Second Edition Textiles ù Determination of dimensional change in washing and drying Second Edition Textiles Fibres - Determination of Breaking Force and Elongation at Break of Individual Fibres Second Edition; (CEN EN ISO 5079: 1995) Sisal Agricultural Twines Second Edition; (CEN EN 25080: 1993) Textiles - Determination of Thickness of Textiles and Textile Products Second Edition CEN EN ISO 5084: 1996 Textiles - Determination of Thermal Resistance - Part 1: Low Thermal Resistance First Edition Hand-Knotted Carpets - Sampling and Selection of Areas of Test First Edition Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical Testing First Edition Documentation - Abstract Sheets in Serial Publications First Edition Documentation - Headers for Microfiche of Monographs and Serials First Edition Information and Documentation - Vocabulary First Edition Acoustics - Measurement of Noise Inside Motor Vehicles First Edition Acoustics - Measurement of Noise Inside Aircraft Third Edition Acoustics ù Measurements of sound pressure level emitted by stationary road vehicles Second Edition

ISO

5131

ISO

5135

ISO ISO ISO ISO ISO ISO ISO ISO

5136 5138-1 5138-2 5138-3 5138-4 5138-5 5138-7 5138-9

ISO ISO ISO ISO ISO ISO ISO

5145 AMD 1 5145 5149 5151 5163 5164 5165

ISO

5167-1

ISO

5167-2

ISO

5167-3

ISO

5167-4

ISO ISO ISO ISO

5168 5169 5170 5171

ISO

5172

Acoustics - Tractors and Machinery for Agriculture and Forestry - Measurement of Noise at the Operator┤s Position - Survey Method Second Edition Acoustics - Determination of Sound Power Levels of Noise from Air-Terminal Devices, Air-Terminal Units, Dampers and Valves by Measurement in a Reverberation Room Second Edition Acoustics - Determination of Sound Power Radiated into a Duct by Fans and Other Air-Moving Devices - In-Duct Method Second Edition Office Machines - Vocabulary - Section 01 : Dictation Equipment First Edition Office Machines - Vocabulary - Section 02 : Duplicators First Edition Office Machines - Vocabulary - Section 03 : Addressing Machines First Edition Office Machines - Vocabulary - Section 04 : Letter Opening Machines First Edition Office Machines - Vocabulary - Section 05 : Letter Folding Machines First Edition Office Machines - Vocabulary - Part 07: Postal Franking Machines First Edition Office Machines - Vocabulary - Part 09: Typewriters First Edition Cylinder valve outlets for gases and gas mixtures ù Selection and dimensioning AMENDMENT 1: Cylinder valve outlets for gases for medical use Second Edition Cylinder valve outlets for gases and gas mixtures ù Selection and dimensioning Second Edition Mechanical Refrigerating Systems Used for Cooling and Heating - Safety Requirements First Edition; Non-Ducted Air Conditioners and Heat Pumps - Testing and Rating for Performance First Edition; Petroleum products Determination of knock characteristics of motor and aviation fuels Motor method Third Edition Petroleum products Determination of knock characteristics of motor fuels Research method Third Edition Petroleum Products - Determination of the Ignition Quality of Diesel Fuels - Cetane Engine Method Third Edition Measurement of Fluid Flow by Means of Pressure Differential Devices Inserted in Circular Cross-Section Conduits Running Full - Part 1: General Principles and Requirements Second Edition Measurement of Fluid Flow by Means of Pressure Differential Devices Inserted in Circular-Cross Section Conduits Running Full - Part 2: Orifice Plates First Edition Measurement of Fluid Flow by Means of Pressure Differential Devices Inserted in Circular-Cross Section Conduits Running Full - Part 3: Nozzles and Venturi Nozzles First Edition Measurement of Fluid Flow by Means of Pressure Differential Devices Inserted in Circular Cross-Section Conduits Running Full - Part 4: Venturi Tubes First Edition Measurement of fluid flow - Procedures for the evaluation of uncertainties Second edition; Cancels and replaces ISO/TR 5168:1998 Machine Tools - Presentation of Lubrication Instructions First Edition Machine Tools - Lubrication Systems First Edition Pressure Gauges Used in Welding, Cutting and Allied Processes Second Edition Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests Third Edition;:1995 [Replaced: ISO 5186]

ISO

5173

ISO

5175

ISO ISO ISO ISO

5178 5179 5182 5183-1

ISO ISO

5183-2 5184

ISO

5187

ISO

5193

ISO ISO ISO ISO ISO ISO ISO ISO

5194 5196-1 5196-2 5198 5199 5208 5209 5210

ISO

5211

ISO ISO

5218 5219

ISO ISO ISO ISO ISO

5220 5221 5223 5232 5233

Destructive Tests on Welds in Metallic Materials - Bend Tests Second Edition Equipment Used in Gas Welding, Cutting and Allied Processes - Safety Devices for Fuel Gases and Oxygen or Compressed Air General Specifications, Requirements and Tests First Edition Destructive Tests on Welds in Metallic Materials - Longitudinal Tensile Test on Weld Metal in Fusion Welded Joints First Edition Investigation of Brazeability Using a Varying Gap Test Piece First Edition Welding - Materials for Resistance Welding Electrodes and Ancillary Equipment Second Edition Resistance Welding Equipment - Electrode Adaptors, Male Taper 1:10 - Part 1: Conical Fixing, Taper 1:10 Second Edition Resistance Spot Welding - Electrode Adaptors, Male Taper 1:10 - Part 2: Parallel Shank Fixing for End-Thrust Electrodes Second Edition Straight Resistance Spot Welding Electrodes First Edition; (CEN EN 25184: 1994) Welding and Allied Processes - Assemblies Made with Soft Solders and Brazing Filler Metals - Mechanical Test Methods First Edition Wrought Aluminium and Aluminium Alloys - Drawn Round Bars - Tolerances on Shape and Dimensions (Symmetric Plus and Minus Tolerances on Diameter) First Edition Aluminium and Aluminium Alloys - Determination of Zinc Content - Flame Atomic Absorption Spectrometric Method First Edition Magnesium Alloys - Determination of Thorium - Part 1: Gravimetric Method First Edition Magnesium Alloys - Determination of Thorium - Part 2: Titrimetric Method First Edition Centrifugal, Mixed Flow and Axial Pumps - Code for Hydraulic Performance Tests - Precision Class First Edition Technical Specifications for Centrifugal Pumps - Class II Second Editiom Industrial Valves - Pressure Testing of Valves Second Edition General Purpose Industrial Valves - Marking First Edition Industrial Valves - Multi-Turn Valve Actuator Attachments First Edition Industrial Valves - Part-Turn Actuator Attachment First Edition; Cancels and Replaces ISO 5211-1:1977, ISO 5211-2:1979 and ISO 5211-3:1982 Information technology Codes for the representation of human sexes Technologies de l┤information Codes de reprÚsentation des sexes humains First Edition Air Distribution and Air Diffusion - Laboratory Aerodynamic Testing and Rating of Air Terminal Devices First Edition Air Distribution and Air Diffusion - Aerodynamic Testing and Rating of Constant and Variable Dual or Single Duct Boxes and Single Duct Units First Edition; Addendum 1: 1984 Air Distribution and Air Diffusion - Rules to Methods of Measuring Air Flow Rate in an Air Handling Duct First Edition Test Sieves for Cereals Third Edition; Amendment 1: 12/15/1999 Graphical Symbols for Textile Machinery Symboles Graphiques Pour Machines Textiles Second Edition Textile Machinery and Accessories - Bottom Fluted Rollers for Drafting Systems First Edition

Textile machinery and accessories - Metallic card clothing - Definitions of dimensions, types and mounting MatÚriel pour l'industrie textile Garnitures de carde DÚfinitions des dimensions, types et montage Second Edition Textile Machinery and Accessories - Packages of Yarns and Intermediate Products - Part 1: Terminology First Edition Textile Machinery and Accessories - Packages of Yarns and Intermediate Products - Part 2: Forms of Winding First Edition Textile Machinery and Accessories - Winding - Basic Terms First Edition Textile Machinery and Accessories - Warp Creels - Main Dimensions Second Edition Textile machinery and accessories Numbering of heald frames and drop wire bars in a loom Second Edition Textile machinery and accessories ù Weaving machines ù Part 1: Vocabulary and classification TECHNICAL CORRIGENDUM 1 MatÚriel pour l'industrie textile ù MÚtiers et machines Ó tisser ù Partie 1: Vocabulaire et classification RECTIFICATIF TECHNIQUE 1 First Edition Textile machinery and accessories ù Weaving machines ù Part 1: Vocabulary and classification MatÚriel pour l'industrie textile ù MÚtiers et machines Ó tisser ù Partie 1: Vocabulaire et classification First Edition [Replaced: ISO 5247] Textile Machinery and Accessories - Weaving Machines - Part 2: Accessories - Vocabulary First Edition Textile Machinery and Accessories - Weaving Machines - Part 3: Parts of the Machine - Vocabulary First Edition

ISO ISO ISO ISO ISO ISO

5234 5238-1 5238-2 5239 5240 5243

ISO

5247-1 CORR 1

ISO ISO ISO

5247-1 5247-2 5247-3

ISO ISO

5248 5249

ISO ISO ISO

5250 5251 5252

ISO ISO

5256 5261

ISO

5263-1

ISO

5263-2

ISO ISO ISO

5263-3 5264-1 5264-2

Textile Machinery and Accessories - Dyeing and Finishing Machinery - Vocabulary for Ancillary Devices Materiel pour L'Industrie Textile et Accessoires - Machines de Teinture et d'Appret - Vocabulaire Relatif aux Dispositifs Annexes Second Edition Textile Machinery and Accessories - Guide Rollers for Dyeing and Finishing Machinery - Main Dimensions First Edition Textile Machinery and Accessories - Dyeing and Finishing Machinery - Terms for Tentering and Heat-Treatment Machinery Second Edition Stainless Steel Butt-Welding Fittings First Edition Steel Tubes - Tolerance Systems Second Edition Steel Pipes and Fittings for Buried or Submerged Pipelines - External and Internal Coating by Bitumen or Coal Tar Derived Materials First Edition Technical Drawings - Simplified Representation of Bars and Profile Sections Second Edition Pulps Laboratory wet disintegration Part 1: Disintegration of chemical pulps First Edition; Together With ISO 5263-2:2004 and ISO 5263-3:2004 Replaces ISO 5263:1995 Pulps Laboratory wet disintegration Part 2: Disintegration of mechanical pulps at 20 ░C First Edition; Together With ISO 52631:2004 and ISO 5263-3:2004 Replaces ISO 5263:1995 Pulps Laboratory wet disintegration Part 3: Disintegration of mechanical pulps at greater than or equal to 85 ░C First Edition; Together with ISO 5263-1:2004 and ISO 5263-2:2004 Replaces ISO 5263:1995 Pulps - Laboratory Beating - Part 1: Valley Beater Method First Edition Pulps Laboratory beating Part 2: PFI mill method Second Edition

ISO ISO

5267-1 5267-2

Pulps - Determination of Drainability - Part 1: Schopper-Riegler Method Second Edition; Technical Corrigendum 1-03/01/2001 Pulps - Determination of Drainability - Part 2:Canadian Standard" Freeness Method Second Edition"

ISO ISO ISO ISO ISO ISO

5269-1 5269-2 5270 5272 5275 5280

Pulps Preparation of laboratory sheets for physical testing Part 1: Conventional sheet-former method Third Edition Pulps Preparation of laboratory sheets for physical testing Part 2: Rapid-K÷then method Third Edition Pulps - Laboratory Sheets - Determination of Physical Properties Second Edition Toluene for Industrial Use - Specifications First Edition Petroleum products and hydrocarbon solvents Detection of thiols and other sulfur species Doctor test Second Edition Xylene for Industrial Use - Specification First Edition

ISO ISO ISO ISO ISO ISO ISO

5282 5284 5285 5287 5288 5289 5290

Aromatic Hydrocarbons - Determination of Sulphur Content - Pitt-Ruprecht Reduction and Spectrophotometric Method First Edition Conveyor belts - List of equivalent terms Second Edition Second edition; Corrigendum 1:2005 Conveyor belts Guidelines for storage and handling Second Edition Belt drives Narrow V-belts for the automotive industry Fatigue test Third Edition Synchronous Belt Drives - Vocabulary Transmissions Synchrones Par Courroies - Vocabulaire Second edition Agricultural Machinery - Endless Hexagonal Belts and Groove Sections of Corresponding Pulleys Second Edition Belt Drives - Grooved Pulleys for Narrow V-Belts - Groove Sections 9N/J, 15N/J, and 25N/J (Effective System) Fourth Edition

ISO ISO

5291 5292

Belt Drives - Grooved Pulleys for Joined Classical V-Belts - Groove Sections AJ, BJ, CJ and DJ (Effective System) Second Edition Belt Drives - V-Belts and V-Ribbed Belts - Calculation of Power Ratings Second Edition

ISO ISO ISO

5293 5294 5295

Conveyor belts Determination of minimum transition distance on three idler rollers Second Edition; Replaces ISO 10357: 11/1/89 Synchronous Belt Drives - Pulleys Second Edition Synchronous Belts - Calculation of Power Rating and Drive Centre Distance Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

5296-1 5296-2 5302 5306 5310 5311 5313 5314 5315 5316 5317 5320 5321 5323

Synchronous Belt Drives - Belts - Part 1: Pitch Codes MXL, XL, L, H, XH and XXH - Metric and Inch Dimensions First Edition Synchronous Belt Drives - Belts - Part 2: Pitch Codes MXL and XXL - Metric Dimensions First Edition Vacuum technology Turbomolecular pumps Measurement of performance characteristics First Edition Fertilizers - Presentation of Sampling Reports First Edition Fertilizers - Determination of Potassium Content - Titrimetric Method First Edition Fertilizers - Determination of Bulk Density (Tapped) Third Edition; (CEN EN 1237: 1995) High Nitrogen Content, Straight Ammonium Nitrate Fertilizers - Determination of Oil Retention First Edition Fertilizers - Determination of Ammoniacal Nitrogen Content - Titrimetric Method After Distillation First Edition Fertilizers - Determination of Total Nitrogen Content - Titrimetric Method After Distillation First Edition Fertilizers - Extraction of Water-Soluble Phosphates First Edition Fertilizers - Determination of Water-Soluble Potassium Content - Preparation of the Test Solution First Edition Solid Wood Parquet - Classification of Fir and Spruce Strips First Edition Coniferous Wood Raw Parquet Blocks - General Characteristics First Edition Solid Wood Parquet and Raw Parquet Blocks - Vocabulary First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

5326 5327 5328 5329 5333 5334 5344 5347-5 5347-7 5347-8

Solid Wood Paving Blocks - Hardwood Paving Blocks - Quality Requirements First Edition Solid Wood Paving Blocks - General Characteristics First Edition Solid Wood Paving Blocks - Softwood Paving Blocks - Quality Requirements First Edition Solid Wood Paving Blocks - Vocabulary First Edition Coniferous Wood Raw Parquet Blocks - Classification of Fir and Spruce Parquet Blocks First Edition Solid Wood Parquet - Classification of Maritime Pine Strips First Edition Electrodynamic vibration generating systems Performance characteristics Second Edition Methods for the Calibration of Vibration and Shock Pick-Ups - Part 5: Calibration by Earth┤s Gravitation First Edition Methods for the Calibration of Vibration and Shock Pick-Ups - Part 7: Primary Calibration by Centrifuge First Edition Methods for the Calibration of Vibration and Shock Pick-Ups - Part 8: Primary Calibration by Dual Centrifuge First Edition

ISO

5347-10

Methods for the Calibration of Vibration and Shock Pick-Ups - Part 10: Primary Calibration by High Impact Shocks First Edition

ISO ISO ISO

5347-11 5347-12 5347-13

ISO ISO ISO ISO

5347-14 5347-15 5347-16 5347-17

Methods for the Calibration of Vibration and Shock Pick-Ups - Part 11: Testing of Transverse Vibration Sensitivity First Edition Methods for the Calibration of Vibration and Shock Pick-Ups - Part 12: Testing of Transverse Shock Sensitivity First Edition Methods for the Calibration of Vibration and Shock Pick-Ups - Part 13: Testing of Base Strain Sensitivity First Edition Methods for the Calibration of Vibration and Shock Pick-Ups - Part 14: Resonance Frequency Testing of Undamped Accelerometers on a Steel Block First Edition Methods for the Calibration of Vibration and Shock Pick-Ups - Part 15: Testing of Acoustic Sensitivity First Edition Methods for the Calibration of Vibration and Shock Pick-Ups - Part 16: Testing of Mounting Torque Sensitivity First Edition Methods for the Calibration of Vibration and Shock Pick-Ups - Part 17: Testing of Fixed Temperature Sensitivity First Edition

ISO ISO

5347-18 5347-19

ISO ISO

5347-22 5348

ISO

5349-1

ISO

5349-2

ISO

5350-1

ISO ISO

5350-2 5350-3

Methods for the Calibration of Vibration and Shock Pick-Ups - Part 18: Testing of Transient Temperature Sensitivity First Edition Methods for the Calibration of Vibration and Shock Pick-Ups - Part 19: Testing of Magnetic Field Sensitivity First Edition Methods for the Calibration of Vibration and Shock Pick-Ups - Part 22: Accelerometer Resonance Testing - General Methods First Edition Mechanical Vibration and Shock - Mechanical Mounting of Accelerometers Second Edition Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 1: General Requirements First Edition Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 2: Practical Guidance for Measurement at the Workplace First Edition Pulps Estimation of dirt and shives Part 1: Inspection of laboratory sheets by transmitted light PÔtes Estimation des impuretÚs et b¹chettes Partie 1: Examen des feuilles de laboratoire par lumi×re transmise Third Edition Pulps Estimation of dirt and shives Part 2: Inspection of mill sheeted pulp by transmitted light PÔtes Estimation des impuretÚs et b¹chettes Partie 2: Examen des pÔtes en feuilles par lumi×re transmise Third Edition Pulps - Estimation of Dirt and Shives - Part 3: Inspection by Reflected Light First Edition

ISO ISO ISO ISO ISO ISO

5350-4 5351 5353 5355 CORR 1 5355 5356-1

ISO ISO ISO ISO

5356-2 5358 5359 5360

ISO ISO ISO ISO

5361 5361-4 5362 5364

ISO

5366-1

ISO ISO

5366-3 5367

ISO

5373

ISO

5377

ISO

5378

ISO ISO ISO ISO ISO ISO ISO

5379 5381 5388 5389 5390 5391 5393

Pulps Estimation of dirt and shives Part 4: Instrumental inspection by reflected light using Equivalent Black Area (EBA) method First Edition;: 1999 [Replaced: ISO 15319] Pulps Determination of limiting viscosity number in cupriethylenediamine (CED) solution First Edition; Replaces ISO 5351-1 Earth-Moving Machinery, and Tractors and Machinery for Agriculture and Forestry - Seat Index Point Second Edition Alpine ski-boots - Requirements and test methods CORR 1 Fourth Edition Alpine ski-boots - Requirements and test methods Fourth Edition Anaesthetic and Respiratory Equipment - Conical Connectors - Part 1: Cones and Sockets Third Edition Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectors Second Edition Anaesthetic Machines for Use with Humans Second Edition Low-Pressure Hose Assemblies for Use with Medical Gases Second Edition Anaesthetic vaporizers Agent-specific filling systems Second Edition Anaesthetic and Respiratory Equipment - Tracheal Tubes and Connectors First Edition; Cancels and Replaces ISO 5361-1: 1988, ISO 5361-2: 1993, ISO 5361-3: 1984, ISO 5361-5: 1984 and ISO 7228: 1993; Corrected and Reprinted 12/15/1999 Tracheal Tubes - Part 4: Cole Type Second Edition Anaesthetic Reservoir Bags Fourth Edition Anaesthetic and Respiratory Equipment - Oropharyngeal Airways Third Edition Anaesthetic and Respiratory Equipment - Tracheostomy Tubes - Part 1: Tubes and Connectors for Use in Adults Fourth Edition; Replaces ISO 5366-2:1993; Corrected and Reprinted 09/01/2001 Anaesthetic and Respiratory Equipment - Tracheostomy Tubes - Part 3: Paediatric Tracheostomy Tubes Second Edition; Technical Corrigendum 1: 1/15/2003 Breathing Tubes Intended for Use with Anaesthetic Apparatus and Ventilators Fourth Edition Condensed Phosphates for Industrial Use (Including Foodstuffs) - Determination of Calcium Content - Flame Atomic Absorption Spectrometric Method First Edition Starch Hydrolysis Products - Determination of Reducing Power and Dextrose Equivalent - Lane and Eynon Constant Titre Method First Edition; (CENELEC EN ISO 5377: 1994) Starches and Derived Products - Determination of Nitrogen Content by the Kjeldahl Method - Spectrophotometric Method First Edition Starches and Derived Products - Determination of Sulfur Dioxide Content - Acidimetric Method and Nephelometric Method First Edition; (CEN EN 1185: 1994) Starch Hydrolysis Products - Determination of Water Content - Modified Karl Fischer Method First Edition Stationary Air Compressors - Safety Rules and Code of Practice First Edition Turbocompressors Performance test code Second Edition Compressors - Classification First Edition Pneumatic tools and machines Vocabulary Machines portatives pneumatiques et machines pneumatiques Vocabulaire Rotary Tools for Threaded Fasteners - Performance Test Method Second Edition

ISO ISO ISO ISO

5395 5396 5397 5398-1

Power Lawn-Mowers, Lawn Tractors, Lawn and Garden Tractors, Professional Mowers, and Lawn and Garden Tractors with Mowing Attachments - Definitions, Safety Requirements and Test Procedures First Edition; Amendment 1-1992 Hardmetal Heading Dies - Terminology First Edition Leather - Determination of Nitrogen Content andHide Substance" - Titrimetric Method First Edition" Leather ù Chemical determination of chromic oxide content ù Part 1: Quantification by titration First Edition

ISO ISO ISO

5398-3 5399 5400

Leather ù Chemical determination of chromic oxide content ù Part 3: Quantification by atomic absorption spectrometry First Edition Leather - Determination of Water-Soluble Magnesium Salts - EDTA Titrimetric Method First Edition Leather - Determination of Total Silicon Content - Reduced Molybdosilicate Spectrometric Method First Edition

ISO ISO

5402 5403

Leather Physical and mechanical tests Determination of flex resistance by flexometer method First Edition; IULTCS/IUP 20 Leather Physical and mechanical tests Determination of water resistance of flexible leather First Edition; IULTCS/IUP 10

ISO ISO ISO ISO

5404 5407 5408 5413

ISO

5414-1

ISO ISO ISO ISO ISO

5414-2 5415 5416 5417 5418-1

Leather Physical and mechanical tests Determination of the water resistance of heavy leathers First Edition; IULTCS/IUP 11 As-Sintered Hardmetal Pellets Used in Heading Dies - Dimensions and Tolerances First Edition Cylindrical Screw Threads - Vocabulary First Edition Machine Tools - Positive Drive of Morse Tapers Second Edition Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools Part 1: Dimensions of the driving system of tool shanks Third Edition Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools Part 2: Connecting dimensions of chucks and designation Reduction Sleeves with 7/24 External and Morse Internal Taper and Incorporated Screw First Edition Direct Reduced Iron - Determination of Metallic Iron - Bromine-Methanol Titrimetric Method Third Edition Refractory Bricks for Use in Rotary Kilns - Dimensions First Edition Iron ores . Determination of copper . Part 1: 2,2'-Biquinolyl spectrophotometric method Second Edition

ISO ISO ISO ISO ISO ISO ISO

5418-2 5419 5420 5421 5422 5423 5426

ISO ISO

5426-2 5427

Iron ores Determination of copper Part 2: Flame atomic absorption spectrometric method First Edition;:1986 [Replaced: ISO 4693] Twist Drills - Terms, Definitions and Types Forets - Termes, Definitions Et Types First Edition; Corrigendum 1- 1996 Reamers - Terms, Definitions and Types First Edition Ground High Speed Steel Tool Bits First Edition Road Vehicles - Anchorages for Towing Ropes, Cables or Bars First Edition Moulded Plastics Footwear - Lined or Unlined Polyurethane Boots for General Industrial Use - Specification First Edition Extension of the Latin Alphabet Coded Character Set for Bibliographic Information Interchange Second Edition Information and Documentation - Extension of the Latin Alphabet Coded Character Set for Bibliographic Information Interchange Part 2: Latin Characters Used in Minor European Languages and Obsolete Typography First Edition Extension of the Cyrillic Alphabet Coded Character Set for Bibliographic Information Interchange First Edition

ISO ISO ISO ISO ISO ISO

5428 5429 5431 5432 5433 5435

ISO

5436-1

ISO ISO

5436-2 5437

ISO ISO

5438 5439

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

5440 5444 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456-1 5456-2 5456-3 5456-4 5457 5458 5459 5468

Greek Alphabet Coded Character Set for Bibliographic Information Interchange Second Edition Coated abrasives Flap wheels with incorporated flanges or separate flanges Second edition Leather - Wet Blue Goat Skins - Specification First Edition Leather - Wet Blue Sheep Skins - Specification First Edition Leather - Bovine Wet Blue - Specification First Edition Rubber Compounding Ingredients - Carbon Black - Determination of Tinting Strength Third Edition Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Measurement Standards - Part 1: Material Measures First Edition; Together with ISO 5436-2 Replaces ISO 5436 Geometrical Product Specifications (GPS) Surface texture: Profile method; Measurement standards Part 2: Software measurement standards First Edition; Technical Corrigendum 1: 12/01/2006 Acid-Grade and Ceramic-Grade Fluorspar - Determination of Barium Sulfate Content - Gravimetric Method Second Edition Acid-Grade and Ceramic-Grade Fluorspar - Determination of Silica of Silica Content - Reduced-Molybdosilicate Spectrometric Method Second Edition Acid-Grade Fluorspar - Determination of Available Fluorine Content - Potentiometric Method After Distillation First Edition Sodium Hexafluorosilicate for Industrial Use - Determination of Phosphate Content - Molybdovanadate Spectrophotometric Method First Edition Sodium Hexafluorosilicate for Industrial Use - Determination of Loss in Mass at 105 Degrees Celsius First Edition Ferrosilicon - Specification and Conditions of Delivery First Edition Ferromanganese - Specification and Conditions of Delivery First Edition Ferrosilicomanganese - Specification and Conditions of Delivery First Edition Ferrochromium - Specification and Conditions of Delivery First Edition Ferrosilicochromium - Specification and Conditions of Delivery First Edition Ferrotungsten - Specification and Conditions of Delivery First Edition Ferrovanadium - Specification and Conditions of Delivery First Edition Ferromolybdenum - Specification and Conditions of Delivery First Edition Ferroniobium - Specification and Conditions of Delivery First Edition Ferrotitanium - Specification and Conditions of Delivery First Edition Technical Drawings - Scales First Edition Technical Drawings - Projection Methods - Part 1: Synopsis First Edition Technical Drawings - Projection Methods - Part 2: Orthographic Representations First Edition Technical Drawings - Projection Methods - Part 3: Axonometric Representations First Edition Technical Drawings - Projection Methods - Part 4: Central Projection First Edition; Corrected and Reprinted 08/01/1998 Technical Product Documentation - Sizes and Layout of Drawing Sheets Second Edition Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Positional Tolerancing Second Edition Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical Tolerances First Edition Rotary and rotary impact masonry drill bits with hardmetal tips Dimensions Third Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

5470-1 5470-2 5473 5478 5479 5480 5483 5485 5488 5489 5492 5495 CORR 1 5495

Rubber or Plastics Coated Fabrics - Determination of Abrasion Resistance - Part 1: Taber Abrader First Edition Rubber or Plastics Coated Fabrics - Determination of Abrasion Resistance - Part 2: Martindale Abrader First Edition Rubber- or Plastics-Coated Fabrics - Determination of Crush Resistance Second Edition Rubber Determination of styrene content Nitration method Third Edition Statistical Interpretation of Data - Tests for Departure from the Normal Distribution First Edition Shipbuilding - Guardrails for Cargo Ships First Edition Ships and Marine Technology - Drain Facilities from Oil and Water Tanks Second Edition Shipbuilding - Inland Vessels - Fixed Steel Deck Stairs First Edition Shipbuilding - Accommodation Ladders First Edition Shipbuilding - Embarkation Ladders Second Edition Sensory Analysis - Vocabulary First Edition Sensory analysis ù Methodology ù Paired comparison test TECHNICAL CORRIGENDUM 1 Third Edition Sensory analysis ù Methodology ù Paired comparison test Third Edition

ISO

5496

ISO ISO ISO ISO ISO

5497 5498 5500 5502 5506

ISO

5507

ISO ISO ISO

5508 5509 5510

ISO ISO ISO

5511 5515 5516

Oilseeds, vegetable oils and fats Nomenclature Graines olÚagineuses, corps gras d'origine vÚgÚtale Nomenclature Third Edition Animal and Vegetable Fats and Oils - Analysis by Gas Chromatography of Methyl Esters of Fatty Acids Second Edition; (CEN EN ISO 5508: 1995) Animal and Vegetable Fats and Oils - Preparation of Methyl Esters of Fatty Acids Second Edition Animal Feeding Stuffs - Determination of Available Lysine First Edition Oilseeds - Determination of Oil Content - Method Using Continuous-Wave Low-Resolution Nuclear Magnetic Resonance Spectrometry (Rapid Method) Second Edition; CEN EN ISO 5511:1996; Corrigendum 1 02/15/1997 Fruits, Vegetables and Derived Products - Decomposition of Organic Matter Prior to Analysis - Wet Method First Edition Fruits, Vegetables and Derived Products - Decomposition of Organic Matter Prior to Analysis - Ashing Method First Edition

ISO

5517

Fruits, Vegetables and Derived Products - Determination of Iron Content - 1,10-Phenanthroline Photometric Method First Edition

ISO

5518

Fruits, vegetables and derived products ù Determination of benzoic acid content ù Spectrophotometric method Second edition

Sensory analysis Methodology Initiation and training of assessors in the detection and recognition of odours Analyse sensorielle MÚthodologie Initiation et entra¯ nement des sujets Ó la dÚtection et Ó la reconnaissance des odeurs Second Edition Sensory Analysis - Methodology - Guidelines for the Preparation of Samples for Which Direct Sensory Analysis Is Not Feasible First Edition Agricultural Food Products - Determination of Crude Fibre Content - General Method First Edition Oilseed Residues - Sampling Second Edition Oilseed Residues - Preparation of Test Samples Second Edition Soya Bean Products - Determination of Urease Activity Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

5519 5520 5521 5522 5523 5524 5525 5526 5527 5529

ISO

5530-1

ISO

5530-2

ISO

5530-3

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

5530-4 5534 5536 5537 5538 5542 5543 5544 5545 5546 5547 5548 5549 5550 5553 5554 5555

Fruits, Vegetables and Derived Products - Determination of Sorbic Acid Content First Edition Fruits, Vegetables and Derived Products - Determination of Alkalinity of Total Ash and of Water-Soluble Ash First Edition Fruits, Vegetables and Derived Products - Qualitative Method for the Detection of Sulphur Dioxide First Edition Fruits, Vegetables and Derived Products - Determination of Total Sulphur Dioxide Content First Edition Liquid Fruit and Vegetable Products - Determination of Sulphur Dioxide Content (Routine Method) First Edition Tomatoes - Guide to Cold Storage and Refrigerated Transport Second Edition Potatoes - Storage in the Open (in Clamps) Second Edition Cereals, Pulses and Other Food Grains - Nomenclature First Edition Cereals - Vocabulary First Edition Wheat - Determination of the sedimentation index - Zeleny test Third Edition Wheat Flour - Physical Characteristics of Doughs - Part 1: Determination of Water Absorption and Rheological Properties Using a Farinograph Second Edition Wheat Flour - Physical Characteristics of Doughs - Part 2: Determination of Rheological Properties Using an Extensograph Second Edition Wheat Flour - Physical Characteristics of Doughs - Part 3: Determination of Water Absorption and Rheological Properties Using a Valorigraph First Edition Wheat Flour (Triticum Aestivum L.) - Physical Characteristics of Doughs - Part 4: Determination of Rheological Properties Using an Alveograph Third Edition Cheese and Processed Cheese - Determination of Total Solids Content (Reference Method) Second Edition; IDF 4: 2004 Milk Fat Products - Determination of Water Content - Karl Fischer Method First Edition; IDF 23 Dried milk Determination of moisture content (Reference method) First Edition Milk and Milk Products - Sampling - Inspection by Attributes Second Edition Milk - Determination of Protein Content - Amido Black Dye-Binding Method (Routine Method) First Edition Caseins and Caseinates - Determination of Fat Content - Gravimetric Method (Reference Method) Second Edition Caseins - Determination ofFixed Ash" (Reference Method) First Edition" Rennet Caseins and Caseinates - Determination of Ash (Reference Method) First Edition Caseins and caseinates - Determination of pH (Reference Method) First Edition Caseins - Determination of Free Acidity (Reference Method) First Edition Caseins and Caseinates - Determination of Lactose Content - Photometric Method Second Edition Caseins and Caseinates - Determination of Protein Content (Reference Method) First Edition Caseins and caseinates Determination of moisture content (Reference method) Second Edition; See also IDF 78 Meat and Meat Products - Detection of Polyphosphates First Edition Meat Products - Determination of Starch Content (Reference Method) First Edition Animal and Vegetable Fats and Oils - Sampling Third Edition

ISO

5558

Animal and Vegetable Fats and Oils - Detection and Identification of Antioxidants - Thin-Layer Chromatographic Method First Edition

ISO ISO ISO ISO ISO

5559 5560 5561 5562 5563

ISO ISO ISO ISO ISO ISO

5564 5565-1 5565-2 5566 5567 5572

ISO

5576

ISO

5577

ISO ISO ISO ISO

5579 5580 5593 AMD 1 5593

ISO

5596

ISO ISO

5597 5598

ISO

5599-1 CORR 1

ISO

5599-1

ISO

5599-2 CORR 1

ISO ISO ISO

5599-2 5600 5603

Dehydrated Onion (Allium Cepa Linnaeus) - Specification Third Edition Dehydrated Garlic (Allium Sativum L.) - Specification Third Edition Black Caraway and Blond Caraway (Carum Carvi Linnaeus), Whole - Specification Second Edition Turmeric, Whole or Ground (Powdered) - Specification First Edition Dried Peppermint (Mentha Piperita Linnaeus) - Specification First Edition Black Pepper and White Pepper, Whole or Ground - Determination of Piperine Content - Spectrophotometric Method First Edition Vanilla [Vanilla Fragrans (Salisbury) Ames] - Part 1: Specification First Edition Vanilla [Vanilla Fragrans (Salisbury) Ames] - Part 2: Test Methods First Edition Turmeric - Determination of Colouring Power - Spectrophotometric Method First Edition Dehydrated Garlic - Determination of Volatile Organic Sulphur Compounds First Edition Shipbuilding and Marine Structures - Numbering of Equipment and Structural Elements in Ships First Edition Non-Destructive Testing - Industrial X-Ray and Gamma-Ray Radiology - Vocabulary Essais Non Destructifs - Radiologie Industrielle Aux Rayons X Et Gamma - Vocabulaire First Edition Non-Destructive Testing - Ultrasonic Inspection - Vocabulary Essais Non Destructifs - Controle Par Ultrasons - Vocabulaire First Edition Non-Destructive Testing - Radiographic Examination of Metallic Materials by X- and Gamma-Rays - Basic Rules Second Edition Non-Destructive Testing - Industrial Radiographic Illuminators - Minimum Requirements First Edition Rolling bearings ù Vocabulary AMENDMENT 1 Roulements ù Vocabulaire AMENDEMENT 1 First Edition Rolling Bearings - Vocabulary Roulements - Vocabulaire Second Edition Hydraulic Fluid Power - Gas-Loaded Accumulators with Separator - Ranges of Pressures and Volumes and Characteristic Quantities Second Edition Hydraulic Fluid Power - Cylinders - Housings for Piston and Rod Seals in Reciprocating Applications - Dimensions and Tolerances First Edition Fluid Power Systems and Components - Vocabulary First Edition Pneumatic Fluid Power - Five-Port Directional Control Valves - Part 1: Mounting Interface Surfaces without Electrical Connector Third Edition Pneumatic Fluid Power - Five-Port Directional Control Valves - Part 1: Mounting Interface Surfaces without Electrical Connector Third Edition Pneumatic fluid power ù Five-port directional control valves ù Part 2: Mounting interface surfaces with optional electrical connector TECHNICAL CORRIGENDUM 1 Pneumatic Fluid Power - Five-Port Directional Control Valves - Part 2: Mounting Interface Surfaces with Optional Electrical Connector Second Edition; Amendment 1: 8/15/2004 Rubber - Determination of adhesion to rigid materials using conical shaped parts Third Edition Rubber, Vulcanized - Determination of Adhesion to Wire Cord First Edition Second Edition

ISO ISO ISO ISO ISO ISO ISO

5608 5609 5610 5611 5612 5613 5614

Turning and Copying Tool Holders and Cartridges for Indexable Inserts - Designation Third Edition Boring Bars for Indexable Inserts - Dimensions Fourth Edition Single-Point Tool Holders for Turning and Copying, for Indexable Inserts - Dimensions Fifth Edition Cartridges, Type A, for Indexable Inserts - Dimensions Third Edition Mining - Scraper Bars for Chain Conveyors Second Edition Mining - Drive Sprocket Assemblies for Chain Conveyors First Edition Locked Coil Wire Ropes for Mine Hoisting - Technical Delivery Requirements First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO

5620-1 5620-2 5621 5625 5626 5627 5628 5629 5630-1

Shipbuilding and Marine Structures - Filling Connection for Drinking Water Tanks - Part 1: General Requirements First Edition Shipbuilding and Marine Structures - Filling Connection for Drinking Water Tanks - Part 2: Components First Edition Shipbuilding - Bilge Mud Boxes for Machinery Spaces and Tunnels - General Design Characteristics First Edition Shipbuilding - Welded Bulkhead Pieces with Flanges for Steel Pipework - PN 6, PN 10 and PN 16 First Edition Paper - Determination of Folding Endurance Second Edition Paper and Board - Determination of Smoothness (Bekk Method) Second Edition: Corrigendum 6/15/2002 Paper and Board - Determination of Bending Stiffness by Static Methods - General Principles First Edition Paper and Board - Determination of Bending Stiffness - Resonance Method First Edition Paper and Board - Accelerated Ageing - Part 1: Dry Heat Treatment at 105 Degrees Celsius Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

5630-3 5630-4 5631 5633 5635 5636-1 5636-3 5636-4 5636-5 5637 5638 5647

ISO ISO

5652 5653

ISO

5654-1

Paper and Board - Accelerated Ageing - Part 3: Moist Heat Treatment at 80 Degrees C and 65% Relative Humidity Second Edition Paper and Board - Accelerated Ageing - Part 4: Dry Heat Treatment at 120 or 150 Degrees Celsius First Edition Paper and Board - Determination of Colour (C/2 Degrees) - Diffuse Reflectance Method First Edition Paper and Board - Determination of Resistance to Water Penetration First Edition Paper - Measurement of Dimensional Change After Immersion in Water First Edition; (Erratum-1982) Paper and Board - Determination of Air Permeance (Medium Range) - Part 1: General Method First Edition Paper and Board - Determination of Air Permeance (Medium Range) - Part 3: Bendtsen Method Second Edition Paper and board Determination of air permeance (medium range) Part 4: Sheffield method Second Edition Paper and board Determination of air permeance and air resistance (medium range) Part 5: Gurley method Second Edition Paper and Board - Determination of Water Absorption After Immersion in Water Second Edition Solid Fibreboard - Determination of Grammage of Single Layers First Edition Paper and Board - Determination of Titanium Dioxide Content First Edition Information Processing - 9-Track, 12,7 mm (0.5 in) Wide Magnetic Tape for Information Interchange - Format and Recording, Using Group Coding at 246 cpmm (6 250 cpi) Second Edition Information Processing - Interchangeable Magnetic Twelve-Disk Pack (200 Mbytes) First Edition Information Processing - Data Interchange on 200 mm (8 in) Flexible Disk Cartridges Using Two-Frequency Recording at 13 262 ftprad on One Side - Part 1: Dimensional, Physical and Magnetic Characteristics Second Edition; CAN/CGSB-186.1-93

Information Processing - Data Interchange on 200 mm (8 in) Flexible Disk Cartridges Using Two-Frequency Recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on One Side - Part 2: Track Format Second Edition Photography - Industrial Radiographic Films (Roll and Sheet) and Metal Intensifying Screens - Dimensions Third Edition Reaction to Fire Tests - Ignitability of Building Products Using a Radiant Heat Source Second Edition Reaction to fire tests Spread of flame Part 1: Guidance on flame spread First Edition Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration Second Edition Reaction to Fire Tests - Spread of Flame - Part 4: Intermediate-Scale Test of Vertical Spread of Flame with Vertically Oriented Specimen First Edition Plastics - Smoke Generation - Part 1: Guidance on Optical-Density Testing First Edition Plastics Smoke generation Part 2: Determination of optical density by a single-chamber test Second Edition Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) Second Edition Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement) First Edition Petroleum Products - Hydrocarbon Liquids - Determination of Refractive Index First Edition

ISO ISO ISO ISO

5654-2 5655 5657 5658-1

ISO

5658-2

ISO ISO ISO

5658-4 5659-1 5659-2

ISO

5660-1

ISO ISO

5660-2 5661

ISO ISO ISO

5663 5664 5666

ISO ISO ISO

5667-1 5667-3 5667-4

ISO ISO ISO ISO ISO ISO ISO ISO

5667-5 5667-6 5667-7 5667-8 5667-9 5667-10 5667-11 5667-12

Water Quality - Determination of Kjeldahl Nitrogen - Method After Mineralization with Selenium First Edition; (CEN EN 25663: 1993) Water Quality - Determination of Ammonium - Distillation and Titration Method First Edition Water Quality - Determination of Mercury First Edition Water quality Sampling Part 1: Guidance on the design of sampling programmes and sampling techniques Second Edition; Replaces ISO 5667-2:1991, CEN EN 25667-1:1993, and CEN EN 25667-2:1993 [Replaced: ISO 5667-2] Water quality Sampling Part 3: Guidance on the preservation and handling of water samples Third Edition Water Quality - Sampling - Part 4: Guidance on Sampling from Lakes, Natural and Man-Made First Edition Water quality Sampling Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems Second Edition Water Quality - Sampling - Part 6: Guidance on sampling of rivers and streams Second Edition Water Quality - Sampling - Part 7: Guidance on Sampling of Water and Steam in Boiler Plants First Edition Water Quality - Sampling - Part 8: Guidance on the Sampling of Wet Desposition First Edition Water Quality - Sampling - Part 9: Guidance on Sampling from Marine Waters First Edition Water Quality - Sampling - Part 10: Guidance on Sampling of Waste Waters First Edition Water Quality - Sampling - Part 11: Guidance on Sampling of Groundwaters First Edition Water Quality - Sampling - Part 12: Guidance on Sampling of Bottom Sediments First Edition

ISO

5667-13

Water Quality - Sampling - Part 13: Guidance on Sampling of Sludges from Sewage and Water Treatment Works First Edition

ISO ISO ISO ISO ISO ISO

5667-14 5667-15 5667-16 5667-17 5667-18 5667-19

ISO

5669

ISO

5670

ISO

5673-1

ISO

5673-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO

5674 5675 5676 5678 5679 5680 5681 5682-1 5682-2

ISO

5682-3

ISO ISO ISO ISO ISO ISO ISO

5687 5690-1 5690-2 5691 5692-1 5692-2 CORR 1 5692-2

Water Quality - Sampling - Part 14: Guidance on Quality Assurance of Environmental Water Sampling and Handling First Edition Water Quality - Sampling - Part 15: Guidance on Preservation and Handling of Sludge and Sediment Samples First Edition Water Quality - Sampling - Part 16: Guidance on Biotesting of Samples First Edition Water Quality - Sampling - Part 17: Guidance on Sampling of Suspended Sediments First Edition Water Quality - Sampling - Part 18: Guidance on Sampling of Groundwater at Contaminated Sites First Edition Water quality Sampling Part 19: Guidance on sampling of marine sediments First Edition Agricultural Trailers and Trailed Equipment - Braking Cylinders - Specifications First Edition; (Corrected and Reprinted - 1984) Agricultural Trailers - Single-Acting Telescopic Tipping Cylinders - 25 MPa (250 Bar) Series - Types 1, 2, and 3 - Interchangeability Dimensions First Edition Agricultural tractors and machinery Power take-off drive shafts and powerinput connection Part 1: General manufacturing and safety requirements First Edition; Replaces ISO 5673:1993 Agricultural tractors and machinery Power take-off drive shafts and powerinput connection Part 2: Specification for use of PTO drive shafts, and position and clearance of PTO drive line and PIC for various attachments First Edition; Replaces ISO 5673:1993 Tractors and machinery for agriculture and forestry Guards for power take-off (PTO) drive-shafts Strength and wear tests and acceptance criteria Second Edition; Replaces ISO 5674-1:1992 and ISO 5674-2:1992 Agricultural Tractors and Machinery - General Purpose Quick-Action Hydraulic Couplers Second Edition Tractors and Machinery for Agriculture and Forestry - Hydraulic Coupling - Braking Circuit First Edition Agricultural Machinery - Equipment for Working the Soil - S-Tines: Main Dimensions and Clearance Zones Second Edition Equipment for Working the Soil - Disks - Classification, Main Fixing Dimensions and Specifications First Edition Equipment for Working Soil - Tines and Shovels for Cultivators - Main Fixing Dimensions First Edition Equipment for Crop Protection - Vocabulary Second Edition Equipment for Crop Protection - Spraying Equipment - Part 1: Test Methods for Sprayer Nozzles Second Edition Equipment for Crop Protection - Spraying Equipment - Part 2: Test Methods for Hydraulic Sprayers Second Edition Equipment for Crop Protection - Spraying Equipment - Part 3: Test Method for Volume/Hectare Adjustment Systems of Agricultural Hydraulic Pressure Sprayers First Edition; Corrected and Reprinted:1997-07-01; BS 6356: Part 10: 1997 Equipment for Harvesting - Combine Harvesters - Determination and Designation of Grain Tank Capacity and Unloading Device Performance Second Edition Equipment for Distributing Fertilizers - Test Methods - Part 1: Full Width Fertilizer Distributors Second Edition Equipment for Distributing Fertilizers - Test Methods - Part 2: Fertilizer Distributors in Lines First Edition Equipment for Planting - Potato Planters - Method of Testing First Edition Agricultural vehicles Mechanical connections on towed vehicles Part 1: Dimensions for hitch rings First Edition Agricultural vehicles ù Mechanical connections on towed vehicles ù Part 2: Coupling ring 40 with socket First Edition Agricultural vehicles ù Mechanical connections on towed vehicles ù Part 2: Coupling ring 40 with socket First Edition

ISO ISO ISO

5696 5697 5699

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

5700 5702 5703 5704 5707 5708 5710 5711 5713 5715

ISO ISO

5718 5721

ISO

5725-1

ISO

5725-2

ISO

5725-3

ISO

5725-4

ISO

5725-5

ISO ISO ISO ISO ISO ISO ISO ISO

5725-6 5734 5738 5739 5740 5742 5743 5744

Trailed Agricultural Vehicles - Brakes and Braking Devices - Laboratory Test Method First Edition Agricultural and Forestry Vehicles - Determination of Braking Performance First Edition Agricultural Machines, Implements and Equipment - Dimensions for Mechanical Loading with Bulk Goods First Edition Tractors for agriculture and forestry Roll-over protective structures (ROPS) Tractors for agriculture and forestry Roll-over protective structures (ROPS) Static test method and acceptance conditions Fourth Edition Equipment for Harvesting - Combine Harvester Component Parts - Equivalent Terms First Edition Equipment for Vine Cultivation and Wine Making - Grape Presses - Methods of Test First Edition Equipment for Vine Cultivation and Wine Making - Grape-Harvesting Machinery - Test Methods First Edition Milking machine installations ù Construction and performance Third edition Refrigerated Bulk Milk Tanks First Edition Equipment for Internal Farm Work and Husbandry - Continuous Manure Scraper Conveyors for Stalls First Edition Tractors and Machinery for Agriculture and Forestry - Wheel-to-Hub Fixing Dimensions First Edition Equipment for Working the Soil - Fixing Bolts for Soil Working Elements First Edition Equipment for Harvesting - Dimensional Compatibility of Forage Harvesting Machinery First Edition Harvesting Equipment - Blades for Agricultrual Rotary Mowers - Requirements First Edition; Replaces ISO 5718-1 and 5718-2 Tractors for Agriculture - Operator┤s Field of Vision Second Edition Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 1: General Principles and Definitions First Edition; Corrigendum 1-1998 Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method First Edition; Technical Corrigendum 1: 5/15/2002 Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 3: Intermediate Measures of the Precision of a Standard Measurement Method First Edition; Replaces ISO 5725; Corrigendum 1 10/15/2001 Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 4: Basic Methods for the Determination of the Trueness of a Standard Measurement Method First Edition; Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 5: Alternative Methods for the Determination of the Precision of a Standard Measurement Method First Edition; Corrigendum 1: 8/15/2005 Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 6: Use in Practice of Accuracy Values First Edition; Replaces ISO 5725; Corrigendum 1:10/15/2001 Acceptance Conditions of Mechanical Dividing Heads for Machine Tools - Testing of Accuracy Second Edition Milk and milk products Determination of copper content Photometric method (Reference method) Second Edition Caseins and Caseinates - Determination of Dontents of Scorched Particles and of Extraneous Matter Second Edition Road Vehicles - Rear View Mirrors - Test Method for Determining Reflectance Second Edition Pliers and nippers Nomenclature Pinces et tenailles Nomenclature Second Edition Pliers and nippers General technical requirements Third Edition Pliers and nippers Methods of test Third Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

5745 5746 5747 5748 5749 5751-1 CORR 1 5751-1 5751-2 5751-3 5752 5753 5754 5755

ISO ISO ISO

5758 5763 5764

ISO

5765-1

ISO ISO

5765-2 5766

ISO

5767

ISO

5768

Pliers and nippers Pliers for gripping and manipulating Dimensions and test values Third Edition Pliers and nippers Engineer┤s and Lineman┤s pliers Dimensions and test values Third Edition Pliers and Nippers - Lever Assisted Side Cutting Pliers, End and Diagonal Cutting Nippers - Dimensions Second Edition Pliers and nippers End cutting nippers Dimensions and test values Third Edition Pliers and nippers Diagonal cutting nippers Dimensions and test values Third Edition Motorcycle tyres and rims (metric series) ù Part 1: Design guides TECHNICAL CORRIGENDUM 1 Sixth Edition Motorcycle tyres and rims (metric series) ù Part 1: Design guides Sixth Edition Motorcycle Tyres and Rims (Metric Series) - Part 2: Tyre Dimensions and Load-Carrying Capacities Fifth Edition Motorcycle Tyres and Rims (Metric Series) - Part 3: Range of Approved Rim Contours Fifth Edition Metal Valves for Use in Flanged Pipe Systems - Face-to-Face and Centre-to-Face Dimensions Second Edition Rolling Bearings - Radial Internal Clearance Second Edition Sintered Metal Materials, Excluding Hardmetals - Unnotched Impact Test Piece First Edition; (CEN EN 25754: 1993) Sintered Metal Materials - Specifications Second Edition Cinematography - Labelling of Containers for Motion-Picture Film and Magnetic Materials - Minimum Information for Exchange of Materials Second Edition Photography - Electronic Flash Equipment - Automatic Control of Exposure Second Edition; (ANSI PH3.416-1992) Milk - Determination of Freezing Point - Thermistor Cryoscope Method (Reference Method) Second Edition; IDF 108 Dried Milk, Dried Ice-Mixes and Processed Cheese - Determination of Lactose Content - Part 1: Enzymatic Method Utilizing the Glucose Moiety of the Lactose First Edition Dried Milk, Dried Ice-Mixes and Processed Cheese - Determination of Lactose Content - Part 2: Enzymatic Method Utilizing the Galactose Moiety of the Lactose First Edition Pallet Stackers and High-Lift Platform Trucks - Stability Tests Second Edition Industrial Trucks Operating in Special Condition of Stacking with Mast Tilted Forward - Additional Stability Test Second Edition; Amendment 1: 12-01-1999 Cinematography - Image Produced by Camera Aperture Type W on 16 mm Motion-Picture Film - Position and Dimensions Third Edition

ISO

5771

Rubber Hose and Hose Assemblies for Transferring Anhydrous Ammonia - Specification Second Edition; Corrigendum 1: 1995

ISO ISO ISO ISO ISO ISO ISO

5772 5774 5775-1 5775-2 5776 5778 5779

Rubber Hoses and Hose Assemblies for Measured Fuel Dispensing - Specification First Edition; Replaces ISO 5772-1: 1986 Plastics hoses Textile-reinforced types for compressed-air applications Specification Third Edition Bicycle Tyres and Rims - Part 1: Tyre Designations and Dimensions Fifth Edition Bicycle Tyres and Rims - Part 2: Rims Second Edition; Amendment 1:12/15/2001 Graphic Technology - Symbols for Text Correction First Edition Ship amd Marine Technology - Small Weathertight Steel Hatches Second Edition Shipbuilding - Ordinary Rectangular Windows - Positioning First Edition

ISO

5780

ISO

5781

ISO

5782-1

ISO ISO

5782-2 5783

ISO

5784-1

ISO

5784-2

ISO ISO

5784-3 5789

ISO

5790

ISO

5794-1 CORR 2

ISO ISO

5794-1 CORR 1 5794-1

ISO ISO ISO

5794-2 5796 5797

ISO

5799

ISO ISO ISO ISO ISO

5800 5801 5802 5805 5806

ISO

5807

Shipbuilding - Side Scuttles - Positioning First Edition Hydraulic Fluid Power - Pressure-Reducing Valves, Sequence Valves, Unloading Valves, Throttle Valves and Check Valves Mounting Surfaces Second Edition Pneumatic Fluid Power - Compressed Air Filters - Part 1: Main Characteristics to Be Included in Supplier┤s Literature and ProductMarking Requirements Second Edition Pneumatic Fluid Power - Compressed Air Filters - Part 2: Test Methods to determine the Main Characteristics to Be Included in Supplier┤s Literature First Edition Hydraulic Fluid Power - Code for Identification of Valve Mounting Surfaces and Cartridge Valve Cavities Second Edition Fluid Power Systems and Components - Fluid Logic Circuits - Part 1: Symbols for Binary Logic and Related Functions First Edition Fluid Power Systems and Components - Fluid Logic Circuits - Part 2: Symbols for Supply and Exhausts as Related to Logic Symbols First Edition Fluid Power Systems and Components - Fluid Logic Circuits - Part 3: Symbols for Logic Sequencers and Related Functions First Edition Fluorinated Hydrocarbons for Industrial Use - Determination of Non-Volatile Residue First Edition Inorganic Chemical Products for Industrial Use - General Method for Determination of Chloride Content - Mercurimetric Method First Edition Rubber compounding ingredients ù Silica, precipitated, hydrated ù Part 1: Non-rubber tests TECHNICAL CORRIGENDUM 2 Third edition Rubber compounding ingredients ù Silica, precipitated, hydrated ù Part 1: Non-rubber tests TECHNICAL CORRIGENDUM 1 Third edition Rubber compounding ingredients ù Silica, precipitated, hydrated ù Part 1: Non-rubber tests Third edition Rubber Compounding Ingredients - Silica, Precipitated, Hydrated - Part 2: Evaluation Procedures in Styrene-Butadiene Rubber Second Edition Rubber Compounding Ingredients - Natural Calcium Carbonate - Test Methods Second Edition Ships and marine technology Windows and side scuttles for fire-resistant constructions First Edition; Replaces ISO 5797-1 Photography - Direct-Exposing Medical and Dental Radiographic Film/Process Systems - Determination of ISO Speed and ISO Average Gradient Second Edition Photography - Colour Negative Films for Still Photography - Determination of ISO Speed Second Edition; Technical Corrigendum 1:06-15-2001 Industrial Fans - Performance Testing Using Standardized Airways First Edition Industrial Fans - Performance Testing in Situ First Edition Mechanical Vibration and Shock - Human Exposure - Vocabulary Second Edition Information Processing - Specification of Single-Hit Decision Tables First Edition Information Processing - Documentation Symbols and Conventions for Data, Program and System Flowcharts, Program Network Charts and System Resources Charts First Edition

ISO ISO ISO ISO

5809 5810 5813 5814

ISO

5815-1

ISO

5815-2

ISO

5817 CORR 1

ISO ISO ISO ISO ISO

5817 5821 5822 5826 5827

ISO ISO ISO ISO ISO

5828 5829 5830 5832-1 5832-2

ISO

5832-3

ISO ISO ISO

5832-4 5832-5 5832-6

ISO

5832-7

ISO ISO

5832-8 5832-9

ISO ISO

5832-11 5832-12

Starches and Derived Products - Determination of Sulphated Ash First Edition Starches and Derived Products - Determination of Chloride Content - Potentiometric Method First Edition Water Quality - Determination of Dissolved Oxygen - Iodometric Method First Edition; (CEN EN 25813: 1992) Water Quality - Determination of Dissolved Oxygen - Electrochemical Probe Method Second Edition Water Quality - Determination of Biochemical Oxygen Demand after n Days (BODn) - Part 1: Dilution and Seeding Method with Allylthiourea Addition First Edition; Replaces ISO 5815 Water Quality - Determination of Biochemical Oxygen Demand After n Days (BODn) - Part 2: Method for Undiluted Samples First Edition; Replaces ISO 5815 Welding ù Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) ù Quality levels for imperfections TECHNICAL CORRIGENDUM 1 Second Edition Welding ù Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) ù Quality levels for imperfections Second Edition Resistance Spot Welding Electrode Caps First Edition Spot Welding Equipment - Taper Plug Gauges and Taper Ring Gauges Second Edition Resistance Welding Equipment - Transformers - General Specifications Applicable to All Transformers Second Edition Spot Welding - Electrode Back-Ups and Clamps First Edition; (Corrected and Reprinted - 1985) Resistance Welding Equipment - Secondary Connecting Cables with Terminals Connected to Water-Cooled Lugs - Dimensions and Characteristics Second Edition Resistance Spot Welding - Electrode Adaptors, Female Taper 1 : 10 First Edition Resistance Spot Welding - Male Electrode Caps First Edition Implants for surgery ù Metallic materials ù Part 1: Wrought stainless steel Fourth Edition Implants for Surgery - Metallic Materials - Part 2: Unalloyed Titanium Third Edition Implants for Surgery - Metallic Materials - Part 3: Wrought Titanium 6-Aluminium 4-Vanadium Alloy Third Edition; (CAN/CSA-Z310.8M91) Implants for Surgery - Metallic Materials - Part 4: Cobalt- Chromium-Molybdenum Casting Alloy Second Edition; (CAN/CSA-Z310.9M91) Implants for surgery Metallic materials Part 5: Wrought cobalt-chromium-tungsten-nickel alloy Third Edition Implants for Surgery - Metallic Materials - Part 6: Wrought Cobalt-Nickel-Chromium-Molybdenum Alloy Second Edition Implants for Surgery - Metallic Materials - Part 7: Forgeable and Cold-Formed Cobalt- Chromium-Nickel- Molybdenum-Iron Alloy Second Edition Implants for Surgery - Metallic Materials - Part 8: Wrought Cobalt-Nickel-Chromium-Molybdenum-Tungsten-Iron Alloy Second Edition Implants for surgery ù Metallic materials ù Part 9: Wrought high nitrogen stainless steel Second Edition Implants for Surgery - Metallic Materials - Part 11: Wrought Titanium 6-Aluminium 7-Niobium Alloy First Edition; CAN/CSAZ310.7:M91 Implants for surgery ù Metallic materials ù Part 12: Wrought cobalt-chromium-molybdenum alloy Second Edition

ISO ISO ISO ISO ISO ISO ISO

5833 5834-1 CORR 5834-1 5834-2 5834-3 5834-4 5834-5

ISO

5835

ISO

5836

ISO ISO ISO ISO ISO ISO

5837-1 5837-2 5838-1 5838-2 5838-3 5840

ISO

5841-2

ISO ISO ISO

5841-3 5843-1 5843-2

ISO ISO ISO ISO ISO ISO ISO

5843-3 5843-4 5843-5 5843-6 5843-8 5843-9 5843-10

ISO

5845-1

ISO

5845-2

Implants for Surgery - Acrylic Resin Cements Second Edition Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form Third edition Implants for surgery Ultra-high-molecular-weight polyethylene Part 2: Moulded forms Third Edition Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 3: Accelerated ageing methods First Edition Implants for surgery Ultra-high molecular weight polyethylene Part 4: Oxidation index measurement method First edition Implants for surgery Ultra-high-molecular-weight polyethylene Part 5: Morphology assessment method First edition Implants for Surgery - Metal Bone Screws with Hexagonal Drive Connection, Spherical Under-Surface of Head, Asymmetrical Thread - Dimensions First Edition Implants for Surgery - Metal Bone Plates - Holes Corresponding to Screws with Asymmetrical Thread and Spherical Under-Surface First Edition Implants for Surgery - Intramedullary Nailing Systems - Part 1: Intramedullary Nails with Cloverleaf or V-Shaped Cross-Section First Edition Implants for Surgery - Intramedullary Nailing Systems - Part 2: Medullary Pins First Edition Implants for Surgery - Skeletal Pins and Wires - Part 1: Material and Mechanical Requirements Second Edition Implants for Surgery - Skeletal Pins and Wires - Part 2: Steinmann Skeletal Pins - Dimensions First Edition Implants for Surgery - Skeletal Pins and Wires - Part 3: Kirschner Skeletal Wires First Edition Cardiovascular Implants - Cardiac Valve Prostheses Fourth Edition Implants for Surgery - Cardiac Pacemakers - Part 2: Reporting of Clinical Performance of Populations of Pulse Generators or Leads Second Edition Implants for Surgery - Cardiac Pacemakers - Part 3: Low-Profile Connectors (IS-1) for Implantable Pacemakers Second Edition; TECHNICAL CORRIGENDUM 1: 11/15/2003 Aerospace Construction - List of Equivalent Terms - Part 1: Aerospace Electrical Equipment First Edition Aerospace - List of Equivalent Terms - Part 2: Aerospace Rivets Second Edition Aerospace - List of Equivalent Terms - Part 3: Aerospace Bolts and Nuts Aronautique Et Espace - Liste De Termes Equivalents Partie 3: Boulonnerie Pour Les Constructions Aerospatiales Second Edition Aerospace - List of Equivalent Terms - Part 4: Flight Dynamics Second Edition Aerospace - List of Equivalent Terms - Part 5: Environmental and Operating Conditions for Aircraft Equipment First Edition Aerospace - List of Equivalent Terms - Part 6: Standard Atmosphere First Edition Aerospace - List of Equivalent Terms - Part 8: Aircraft Reliability First Edition Aerospace - List of Equivalent Terms - Part 9: Aircraft First Edition Aerospace - List of Equivalent Terms - Part 10: Aircraft Structure First Edition Technical Drawings - Simplified Representation of the Assembly of Parts with Fasteners - Part 1: General Principles First Edition Technical Drawings - Simplified Representation of the Assembly of Parts with Fasteners - Part 2: Rivets for Aerospace Equipment First Edition

ISO ISO ISO

5855-1 5855-2 5855-3

Aerospace - MJ Threads - Part 1: General Requirements Third Edition Aerospace - MJ Threads - Part 2: Limit Dimensions for Bolts and Nuts Third Edition Aerospace - MJ Threads - Part 3: Limit Dimensions for Fittings for Fluid Systems Second Edition Aerospace - Screws, 100 Degree Normal Countersunk Head, Internal Off-Set Cruciform Ribbed Drive, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa Dimensions First Edition Aerospace - Alloy Steel Protruding Head Bolts with Strength Classification 1 250 MPa and MJ Threads - Procurement Specification First Edition Aerospace - Nuts, Self-Locking, with Maximum Operating Temperature Less Than or Equal to 425 Degrees Celsius - Procurement Specification Second Edition; Corrected and Reprinted 11/15/2000 Aerospace - Graphic Symbols for Schematic Drawings of Hydraulic and Pneumatic Systems and Components First Edition ISO Inch Screw Threads - Allowances and Tolerances Second Edition Aircraft - 2 and 3A Plug-In Base Change-Over Relays, Type II, with Crimped Connections - Clearance and Fixing Dimensions First Edition Aircraft - Electromagnetic Relays and Contactors - Part 1: General Requirements First Edition Reference Atmospheres for Aerospace Use First Edition; Addendum 1: 1983, Addendum 2: 1983, Amendment 1: 1990 Aerospace - Fluid Systems and Components - Methods for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids First Edition Aircraft - Joints for Connecting Crew Members┤ Regulator Masks to Oxygen Sources First Edition Manganese Ores and Concentrates - Determination of Aluminium, Copper, Lead and Zinc Contents - Flame Atomic Absorption Spectrometric Method First Edition

ISO

5856

ISO

5857

ISO ISO ISO

5858 5859 5864

ISO ISO ISO

5866 5867-1 5878

ISO ISO

5884 5887

ISO

5889

ISO ISO

5890 5892

ISO ISO ISO ISO ISO

5893 5894 5897 5898 5902

ISO

5903

Manganese Ores and Concentrates - Determination of Silicon Content - Gravimetric Method First Edition; Replaces ISO R 311: 1963 Rubber Building Gaskets - Materials for Preformed Solid Vulcanized Structural Gaskets - Specification First Edition Rubber and Plastics Test Equipment - Tensile, Flexural and Compression Types (Constant Rate of Traverse) - Specification Third Edition Ships and Marine Technology - Manholes with Bolted Covers Second Edition Passenger Cars - Rear-Window Demisting System - Test Method Second Edition Passenger Cars - Rear-Window Defrosting System - Test Method Second Edition Alpine Skis - Determination of the Elastic Properties First Edition Gymnastic Equipment - Landing Mats and Surfaces for Floor Exercises - Determination of Hardness and Impact Damping First Edition

ISO ISO ISO

5904 5905 5906

Gymnastic Equipment - Landing Mats and Surfaces for Floor Exercises - Determination of Resistance to Slipping First Edition Gymnastic Equipment - Landing Mats (2 000 mm X 1 250 mm X 60 mm) First Edition Gymnastic Equipment - Surfaces for Floor Exercises - Mats First Edition

ISO ISO ISO ISO

5907 5912 5922 5923

Gymnastic Equipment - Surfaces for Floor Exercises - Boards First Edition Camping Tents Third Edition Malleable Cast Iron Second Edition Fire Protection - Fire Extinguishing Media - Carbon Dioxide Second Edition; (CEN EN 25923: 1993)

ISO

5925-1

ISO

5930

ISO

5931

ISO

5938

ISO

5939

ISO

5940

ISO

5940-2

ISO

5943

ISO ISO ISO

5944 5945 5948

ISO ISO ISO ISO

5949 5950 5951 5952

Fire tests ù Smoke-control door and shutter assemblies ù Part 1: Ambient- and medium-temperature leakage tests Second edition Cryolite, Natural and Artificial, and Aluminium Fluoride for Industrial Use - Determination of Phosphorus Content - Reduced Molybdophosphate Photometric Method First Edition Carbonaceous Materials Used in the Production of Aluminium - Calcined Coke and Calcined Carbon Products - Determination of Total Sulfur by the Eschka Method First Edition Cryolite, Natural and artificial, and aluminium fluoride for industrial use - Determination of sulphur content - X-ray fluorescence spectrometric method First Edition Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Water Content - Azeotropic Distillation (Dean and Stark) Method First Edition Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Softening Point by the Ring-andBall Method First Edition Carbonaceous materials used in the production of aluminium ù Pitch for electrodes ù Part 2: Determination of the softening point (Mettler softening point method) First edition Cheese and processed cheese products Determination of chloride content Potentiometric titration method Fourth Edition; See also IDF 88 Milk and Milk-Based Products - Detection of Coagulase-Positive Staphylococci - Most Probable Number Technique First Edition; IDF 60 Rubber - Determination of Polyisoprene Content Second Edition Railway Rolling Stock Material - Ultrasonic Acceptance Testing Second Edition Tool Steels and Bearing Steels - Micrographic Method for Assessing the Distribution of Carbides Using Reference Photomicrographs First Edition Continuous Electrolytic Tin-Coated Cold-Reduced Carbon Steel Sheet of Commercial and Drawing Qualities Third Edition Hot-Rolled Steel Sheet of Higher Yield Strength with Improved Formability Third Edition Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance Third Edition

ISO ISO ISO ISO ISO

5954 5956 5959 5960 5961

Cold-Reduced Carbon Steel Sheet According to Hardness Requirements Second Edition; Corrected and Reprinted 12-01-1999 Copper and Copper Alloys - Determination of Antimony Content - Rhodamine B Spectrometric Method First Edition Copper and Copper Alloys - Determination of Bismuth Content - Diethyldithiocarbamate Spectrometric Method First Edition Copper Alloys - Determination of Cadmium Content - Flame Atomic Absorption Spectrometric Method First Edition Water Quality - Determination of Cadmium by Atomic Absorption Spectrometry Second Edition

ISO ISO ISO ISO

5963 5964 5967 5968

ISO ISO ISO ISO ISO ISO ISO

5969 5970 5971 5975 5978 5979 5981

ISO

5982

ISO

5983-1

ISO ISO ISO ISO ISO

5983-2 5984 CORR 1 5984 5985 CORR 1 5985

ISO ISO

5989 5990

ISO ISO

5993 5996

ISO

5997

ISO ISO ISO ISO

5999 6000 6002 6003

Documentation - Methods for Examining Documents, Determining Their Subjects, and Selecting Indexing Terms First Edition Documentation - Guidelines for the Establishment and Development of Multilingual Thesauri First Edition Taps and Thread Cutting - Nomenclature of the Main Types and Terminology First Edition Circular Screwing Dies - Terminology First Edition Ground Thread Taps for Pipe Threads G Series and Rp Series - Tolerances on the Threaded Portion First Edition; Corrigendum 1: 1991 Furniture - Chairs and Tables for Educational Institutions - Functional Sizes First Edition Size Designation of Clothes - Pantyhose First Edition Chromium Ores - Determination of Calcium and Magnesium Contents - EDTA Titrimetric Method First Edition Rubber- or Plastics-Coated Fabrics - Determination of Blocking Resistance Second Edition; (CEN EN 25978: 1993) Rubber or Plastics Coated Fabrics - Determination of Flexibility - Flat Loop Method First Edition Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Combined Shear Flexing and Rubbing Second Edition Mechanical Vibration and Shock - Range of Idealized Values to Characterize Seated-Body Biodynamic Response under Vertical Vibration Second Edition; Supersedes ISO 7962:1987; Corrected Version:4/01/2002 Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method First Edition; Together with ISO 5983-2 Replaces ISO 5983:1997 Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 2: Block digestion/steam distillation method First Edition; Together with ISO 5983-1 Replaces ISO 5983:1997 Animal feeding stuffs ù Determination of crude ash TECHNICAL CORRIGENDUM 1 Second Edition Animal feeding stuffs ù Determination of crude ash Second Edition Animal feeding stuffs ù Determination of ash insoluble in hydrochloric acid TECHNICAL CORRIGENDUM 1 Second Edition Animal feeding stuffs ù Determination of ash insoluble in hydrochloric acid Second Edition Photography - Pre-Packaged Chemicals for the Processing of Silver Halide Based Photographic Materials - Vocabulary Second Edition Photography - Processing Chemicals - Specifications for Potassium Sulfite, 650 g/l Solution Third Edition Sodium Hydroxide for Industrial Use - Determination of Mercury Content - Flameless Atomic Absorption Spectrometric Method First Edition Cast Iron Gate Valves First Edition Chromium Ores and Concentrates - Determination of Silicon Content - Molecular Absorption Spectrometric Method and Gravimetric Method First Edition Polymeric Materials, Cellular Flexible - Polyurethane Foam for Load-Bearing Applications Excluding Carpet Underlay - Specification First Edition Round-Headed Cabbage - Storage in the Open First Edition Bolted Bonnet Steel Gate Valves First Edition Alpine Skis - Determination of Mass and Polar Moment of Inertia - Laboratory Measurement Method Second Edition

ISO ISO ISO ISO ISO ISO ISO

6004 6005 6009 6011 6012 6014 6015

Alpine Skis - Ski Binding Screws - Requirements Second Edition Alpine Skis - Ski Binding Screws - Test Methods Second Edition Hypodermic Needles for Single Use - Colour Coding for Identification Third Edition; (CEN EN ISO 6009: 1994) Earth-moving machinery Visual display of machine operation Third Edition Earth-Moving Machinery - Service Instrumentation Fourth Edition; BS 6913: Part 4: 1997 Earth-Moving Machinery - Determination of Ground Speed Second Edition Earth-moving machinery Hydraulic excavators and backhoe loaders Methods of determining tool forces Second Edition

ISO

6016

Earth-Moving Machinery - Methods of Measuring the Masses of Whole Machines, Their Equipment and Components Second Edition

ISO

6020-1

ISO

6020-2

ISO

6020-3

ISO ISO

6022 6025

Hydraulic fluid power ù Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series ù Part 1: Medium series Third Edition Hydraulic Fluid Power - Mounting Dimensions for Single Rod Cylinders, 16 MPa (160 Bar) Series - Part 2: Compact Series Third Edition Hydraulic Fluid Power - Mounting Dimensions for Single Rod Cylinders, 16 MPa (160 Bar) Series - Part 3: Compact Series with Bores from 250 mm to 500 mm First Edition Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series Second Edition; Supersedes ISO 8137: 1986 Cinematography - Analogue Photographic Sound Test Films, 35 mm and 16 mm - Specifications Third Edition

ISO

6033

ISO ISO

6035 6036

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

6038 6042 6043 6044 6045 6050 6053 6054-1 6054-2 6055 6058 6059

Cinematography - Projection Reel Size 7 for 8 mm Type S Motion-Picture Film - Dimensions and Specifications First Edition Cinematography - Viewing Conditions for the Evaluation of Films and Slides for Television - Colours, Luminances and Dimensions First Edition Cinematography - Colour Motion-Picture Prints and Slides for Television - Density Specifications First Edition Cinematography - Splices for Use on 70 mm, 65 mm, 35 mm and 16 mm Motion-Picture Films - Dimensions and Locations Second Edition Ships and Marine Technology - Weathertight Single-Leaf Steel Doors Second Edition Shipbuilding and Marine Structures - Eye and Fork Assemblies Under Tension Load - Main Dimensions First Edition Shipbuilding and Marine Structures - Derrick Boom Heel Fittings - Main Dimensions First Edition Shipbuilding and Marine Structures - Bearings for Derrick Goosenecks - Assemblies and Components First Edition Shipbuilding - Bulbous Bow and Side Thruster Symbols First Edition Photography - Shutter Cable Release Tip and Socket - Dimensions First Edition Motorcycle Tyres and Rims (Code-Designated Series) - Diameter Codes 4 to 12 - Part 1: Tyres Third Edition Motorcycle Tyres and Rims (Code-Designated Series) - Diameter Codes 4 to 12 - Part 2: Rims Second Edition Industrial trucks Overhead guards Specification and testing Third Edition Water Quality - Determination of Calcium Content - EDTA Titrimetric Method First Edition Water Quality - Determination of the Sum of Calcium and Magnesium - EDTA Titrimetric Method First Edition

ISO

6060

ISO

6068

ISO ISO ISO ISO ISO ISO ISO

6070 6072 6078 6079 6091 6092 6093

Water Quality - Determination of the Chemical Oxygen Demand Second Edition Information Processing - Recording Characteristics of Instrumentation Magnetic Tape (Including Telemetry Systems) - Interchange Requirements First Edition Auxiliary tables for vibration generators Methods of describing equipment characteristics First Edition; Technical Corrigendum 1: 09/15/2006 Hydraulic Fluid Power - Compatibility between Fluids and Standard Elastomeric Materials Second Edition Black Tea - Vocabulary First Edition Instant Tea in Solid Form - Specification First Edition Dried Milk - Determination of Titratable Acidity (Reference Method) First Edition Dried Milk - Determination of Titratable Acidity (Routine Method) First Edition; (Erratum-1981) Information Processing - Representation of Numerical Values in Character Strings for Information Interchange First Edition

ISO

6098

Information Processing - Self-Loading Cartridges for 12,7 mm (0.5 in) Wide Magnetic Tape Second Edition; CEN EN 26098: 1993

ISO

6099

Fluid Power Systems and Components - Cylinders - Identification Code for Mounting Dimensions and Mounting Types Third Edition

ISO

6101-1

Rubber - Determination of Metal Content by Atomic Absorption Spectrometry - Part 1: Determination of Zinc Content Second Edition

ISO

6101-2

ISO

6101-3

ISO

6101-4

Rubber - Determination of Metal Content by Atomic Absorption Spectrometry - Part 2: Determination of Lead Content Second Edition Rubber - Determination of Metal Content by Atomic Absorption Spectrometry - Part 3: Determination of Copper Content Second Edition Rubber - Determination of Metal Content by Atomic Absorption Spectrometry - Part 4: Determination of Manganese Content Second Edition

ISO ISO

6101-5 6103

ISO

6104

ISO

6105-1

ISO ISO ISO ISO ISO

6105-2 6106 6107-1 6107-2 6107-3

Rubber Determination of metal content by atomic absorption spectrometry Part 5: Determination of iron content Second Edition Bonded abrasive products Permissible unbalances of grinding wheels as delivered Static testing Third edition Superabrasive products Rotating grinding tools with diamond or cubic boron nitride General survey, designation and multilingual nomenclature Second Edition Blanks for superabrasive cutting-off wheels Part 1: Manually guided cutting-off in building and civil engineering First Edition; Together with ISO 6105-2 Replaces ISO 6105:1988 Blanks for superabrasive cutting-off wheels Part 2: Hand-held cutting-off in building and civil engineering First Edition; Together with ISO 6105-1 and 6105-2 Replaces ISO 6105:1988 Abrasive products - Checking the grit size of superabrasives Second edition Water quality Vocabulary Part 1 QualitÚ de l'eau Vocabulaire Partie 1 Fourth Edition Water Quality - Vocabulary - Part 2 QualitÚ de l'eau Vocabulaire Partie 2 Fourth Edition Water Quality - Vocabulary - Part 3 Second Edition; Amendment 1 - 12/15/2001

ISO ISO

6107-4 6107-5

Water Quality - Vocabulary - Part 4 Second Edition Water Quality - Vocabulary - Part 5 QualitÚ de l'eau Vocabulaire Partie 5 Third Edition

ISO ISO

6107-6 6107-7

ISO ISO ISO ISO

6107-8 6107-9 6108 6115

ISO

6117

ISO

6118

ISO

6119

ISO

6120

ISO ISO ISO ISO ISO ISO ISO ISO

6121 6122 6123-1 6123-2 6123-3 6127 6129 6130

ISO ISO ISO ISO ISO ISO ISO

6133 6134 6138 6139 6140 6141 6142

Water Quality - Vocabulary - Part 6 QualitÚ de l'eau Vocabulaire Partie 6 ╩Ó¸Õ±Ô¯ Ô¯ õ¹ ªÙ¯ ÔÓ-³ ÎÓ±³ 6 Third Edition Water quality - Vocabulary - Part 7 QualitÚ de l'eau Vocabulaire Partie 7 Third Edition Wasserbeschaffengeit - Begriffe - Teil 8 Water Quality - Vocabulary - Part 8 Qualite De L'Eau - Vocabulaire - Partie 8 First Edition; Amendment 1 12/01/2001 Water Quality - Vocabulary - Part 9: Alphabetical List and Subject Index First Edition Double Equal Angle Cutters with Plain Bore and Key Drive First Edition Shipbuilding - Trawl Winches Second Edition Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 ░C max.) Second Edition Road Vehicles - Elastomeric Cups and Seals for Hydraulic Brake Actuating Cylinders Using a Non-Petroleum Base Hydraulic Brake Fluid (Service Temperature 70 Degrees Celsius Maximum) Second Edition Road vehicles Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 ░C max.) Second Edition Road Vehicles - Brake Hose Assemblies for Hydraulic Braking Systems Used with Petroleum-Base Brake Fluid Second Edition; Corrected and Reprinted 10/01/1997 Surface Active Agents - Technical Alkane Sulfonates - Determination of Alkane Monosulfonates Content by Direct Two-Phase Titration Second Edition Surface Active Agents - Technical Alkane Sulphonates - Determination of Total Alkane Sulphonates Content First Edition Rubber or Plastics Covered Rollers - Specifications - Part 1: Requirements for Hardness First Edition Rubber- or Plastics-Covered Rollers - Specifications - Part 2: Surface Characteristics Second Edition Rubber- or Plastics-Covered Rollers - Specifications - Part 3: Dimensional Tolerances First Edition Chromium Ores - Determination of Phosphorus Content - Reduced Molybdophosphate Photometric Method First Edition Chromium Ores - Determination of Hygroscopic Moisture Content in Analytical Samples - Gravimetric Method Chromium Ores - Determination of Total Iron Content - Titrimetric Method After Reduction First Edition Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength Second Edition Rubber hoses and hose assemblies for saturated steam Specification Third Edition Aluminium Ores - Experimental Determination of the Heterogeneity of Constitution First Edition Aluminium Ores - Experimental Determination of the Heterogeneity of Distribution of a Lot First Edition Aluminium Ores - Preparation of Samples First Edition Gas Analysis - Requirements for Certificates for Calibration Gases and Gas Mixtures Third Edition Gas Analysis - Preparation of Calibration Gas Mixtures - Gravimetric Method Second Edition

Gas Analysis - Comparison Methods for Determining and Checking the Composition of Calibration Gas Mixtures Second Edition; Cancels and Replaces ISO 6711:1981 Gas Analysis - Preparation of Calibration Gas Mixtures - Static Volumetric Methods Second Edition Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration Second Edition

ISO ISO

6143 6144

ISO

6145-1

ISO

6145-2

ISO

6145-4

ISO

6145-5

ISO

6145-6

ISO

6145-7

ISO

6145-8

ISO

6145-9

ISO

6145-10

ISO ISO ISO

6145-11 6147 6148

ISO

6149-1

ISO

6149-2

ISO

6149-3

ISO

6149-4

Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 8: Diffusion method First edition Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 9: Saturation Method First Edition; Corrigendum 5/1/02 Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 10: Permeation Method First Edition Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 11: Electrochemical generation First Edition Gas Analysis - Preparation of Calibration Gas Mixtures - Saturation Method First Edition Photography - Micrographic Films, Spools and Cores - Dimensions Second Edition Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal Second Edition Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends Second Edition Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends Second Edition Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs First Edition

ISO

6150

Pneumatic Fluid Power - Cylindrical Quick-Action Couplings for Maximum Working Pressures of 10 Bar, 16 Bar and 25 Bar (1 MPa, 1,6 MPa and 2,5 MPa) - Plug Connecting Dimensions, Specifications, Application Guidelines and Testing First Edition

Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 2: Volumetric Pumps First Edition Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 4: Continuous syringe injection method Second Edition Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 5: Capillary Calibration Devices First Edition Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 6: Critical orifices Second Edition Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 7: Thermal Mass-Flow Controllers First Edition

ISO ISO ISO

6152 6153 6154

ISO ISO ISO ISO ISO ISO ISO

6155 6157-1 6157-2 6157-3 6158 6160 6161

ISO

6162-1 CORR 1

ISO

6162-1

ISO

6162-2

ISO

6164

ISO ISO ISO ISO ISO ISO

6165 6166 6170 6173 6176 6177

ISO

6178

ISO ISO

6179 6182-1

ISO ISO

6182-2 6182-3

Thermometers for Use with Alcoholometers and Alcohol Hydrometers First Edition Chromium Ores - Increment Sampling First Edition Chromium Ores - Preparation of Samples First Edition Machine Tools - Test Conditions for Horizontal Spindle Turret and Single Spindle Automatic Lathes - Testing of the Accuracy First Edition Fasteners - Surface Discontinuities - Part 1: Bolts, Screws and Studs for General Requirements First Edition Fasteners - Surface Discontinuities - Part 2: Nuts First Edition Fasteners - Surface Discontinuities - Part 3: Bolts, Screws and Studs for Special Requirements First Edition Metallic coatings Electrodeposited coatings of chromium for engineering purposes Second Edition Programming Languages - PL/1 First Edition; Corrected and Printed - 1981 Personal Eye-Protectors - Filters and Eye-Protectors Against Laser Radiation First Edition; (Amendment Slip-1982) Hydraulic fluid power ù Flange connectors with split or one-piece flange clamps and metric or inch screws ù Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 TECHNICAL CORRIGENDUM 1 First Edition Hydraulic fluid power ù Flange connectors with split or one-piece flange clamps and metric or inch screws ù Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 First Edition Hydraulic fluid power Flange connectors with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51 First Edition Hydraulic Fluid Power - Four-Screw, One-Piece Square-Flange Connections for Use at Pressures of 25 MPa and 40 MPa (250 Bar and 400 Bar) First Edition Earth-moving machinery Basic types Identification and terms and definitions Engins de terrassement Principaux types Identification et termes et dÚfinitions Fifth Edition Securities and Related Financial Instruments - International Securities Identification Numbering System (ISIN) Sixth Edition Spinning Machinery - Condenser Rubbers for Cards Second Edition Open-End Spinning Machines - Vocabulary First Edition Textile Machinery - Warp Sizing Machines - Maximum Usable Width Second Edition Textile Machinery - Cloth Rollers - Terminology and Main Dimensions Second Edition Centrifuges - Construction and Safety Rules - Method for the Calculation of the Tangential Stress in the Shell of a Cylindrical Centrifuge Rotor First Edition Rubber, Vulcanized or Thermoplastic - Rubber Sheets and Rubber- Coated Fabrics - Determination of Transmission Rate of Volatile Liquids (Gravimetric Technique) Third Edition Fire protection Automatic sprinkler systems Part 1: Requirements and test methods for sprinklers Second Edition Fire protection Automatic sprinkler systems Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms Second Edition Fire protection Automatic sprinkler systems Part 3: Requirements and test methods for dry pipe valves Second Edition

ISO ISO ISO

6182-4 6182-5 6182-6

ISO

6182-7

Fire Protection - Automatic Sprinkler Systems - Part 4: Requirements and Test Methods for Quick-Opening Devices First Edition Fire Protection - Automatic Sprinkler Systems - Part 5: Requirements and Test Methods for Deluge Valves Second Edition Fire protection Automatic sprinkler systems Part 6 Requirements and test methods for check valves First Edition Fire protection Automatic sprinkler systems Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers First Edition

ISO ISO ISO ISO

6182-8 6182-9 6182-10 6182-11

Fire protection Fire protection Fire protection Fire protection

ISO ISO

6183 6184-1

ISO

6184-2

ISO ISO ISO

6184-3 6184-4 6185-1

Fire Protection Equipment - Carbon Dioxide Extinguishing Systems for Use on Premises - Design and Installation First Edition Explosion Protection Systems - Part 1: Determination of Explosion Indices of Combustible Dusts in Air First Edition Explosion Protection Systems - Part 2: Determination of Explosion Indices of Combustible Gases in Air First Edition; (CEN EN 26184 Part 2: 1991) Explosion Protection Systems - Part 3: Determination of Explosion Indices of Fuel/Air Mixtures Other Than Dust/Air and Gas/Air Mixtures First Edition Explosion Protection Systems - Part 4: Determination of Efficacy of Explosion Suppression Systems First Edition Inflatable Boats - Part 1: Boats with a Maximum Motor Power Rating of 4,5 kW First Edition; Replaces ISO 6185

ISO

6185-2

Inflatable Boats - Part 2: Boats with a Maximum Motor Power Rating of 4,5 kW to 15 kW Inclusive First Edition; Replaces ISO 6185

ISO ISO ISO ISO

6185-3 6186 6187 6189

Inflatable Boats - Part 3: Boats with a Maximum Motor Power Rating of 15 kW and Greater First Edition; Replaces ISO 6185 Plastics - Determination of Pourability Second Edition Rigid Cellular Plastics - Determination of Friability First Edition Acoustics - Pure Tone Air Conduction Threshold Audiometry for Hearing Conservation Purposes First Edition

ISO ISO ISO ISO ISO

6194-1 6194-2 6194-3 6194-4 6194-5

ISO ISO

6195 6196-1

Rotary shaft lip-type seals incorporating elastomeric sealing elements ù Part 1: Nominal dimensions and tolerances Second Edition Rotary Shaft Lip Type Seals - Part 2: Vocabulary First Edition Rotary Shaft Lip Type Seals - Part 3: Storage, Handling and Installation First Edition Rotary Shaft Lip Type Seals - Part 4: Performance Test Procedures Second Edition Rotary Shaft Lip Type Seals - Part 5: Identification of Visual Imperfections First Edition Fluid Power Systems and Components - Cylinders-Rod Wiper-Ring Housings in Reciprocating Applications - Dimensions and Tolerances Second Edition Micrographics - Vocabulary - Part 01: General Terms Second Edition

Automatic sprinkler systems Part 8: Requirements and test methods for pre-action dry alarm valves First Edition Automatic sprinkler system Part 9: Requirements and test methods for water mist nozzles First Edition Automatic sprinkler systems Part 10: Requirements and test methods for domestic sprinklers First Edition Automatic sprinkler systems Part 11: Requirements and test methods for pipe hangers First Edition

ISO ISO

6196-2 6196-3

ISO ISO ISO ISO ISO ISO ISO

6196-4 6196-5 6196-6 6196-7 6196-8 6196-10 6198

ISO

6199

ISO ISO ISO ISO ISO ISO ISO ISO ISO

6200 6205 6206 6207 6208 6209 6210-1 6216 6217

ISO ISO

6218 6219

ISO ISO

6222 6224

ISO

6225-1

ISO

6225-2

ISO

6227

ISO

6228

Micrographics - Vocabulary - Part 02: Image Positions and Methods of Recording Second Edition Micrographics - Vocabulary - Part 03: Film Processing Second Edition Micrographics - Vocabulary - Part 4: Materials and Packaging Micrographie - Vocabulaire - Partie 4: Supports Et Conditionnement Second Edition Micrographics - Vocabulary - Part 05: Quality of Images, Legibility, Inspection First Edition Micrographics - Vocabulary - Part 06: Equipment First Edition Micrographics - Vocabulary - Part 07: Computer Micrographics First Edition Micrographics - Vocabulary - Part 8: Use Micrographie - Vocabulaire - Partie 8: Exploitation First Edition Micrographics - Vocabulary - Part 10: Index First Edition; Technical Corrigendum: 11/01/2004 Micrographics - Readers for Transparent Microforms - Performance Characteristics First Edition Micrographics - Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm - Operating procedures Second edition Micrographics - First Generation Silver-Gelatin Microforms of Source Documents - Density Specifications and Method of Measurement Third Edition Inland Navigation Vessels - Customs Sealing Systems - Basic Technical Requirements First Edition Chemical Products for Industrial Use - Sampling - Vocabulary First Edition Seamless Nickel and Nickel Alloy Tube First Edition Nickel and Nickel Alloy Plate, Sheet and Strip First Edition Rubber Compounding Ingredients - Carbon Black - Determination of Solvent Extractable Material Third Edition Cylinders for Robot Resistance Welding Guns - Part 1: General Requirements First Edition Shipbuilding - Inland Navigation - Pilot Craft - Classification and Basic Requirements First Edition Shipbuilding - Inland Navigation - Pilot Craft - Identification Painting and Inscriptions First Edition Inland navigation vessels Manually operated coupling devices for push tows Safety requirements and main dimensions Second edition Shipbuilding - Inland Vessels - Windlasses and Anchor Capstans First Edition Water Quality - Enumeration of Culturable Micro-Organisms - Colony Count by Inoculation in a Nutrient Agar Culture Medium Second Edition Thermoplastics hoses, textile-reinforced, for general-purpose water applications Specification Third Edition Rubber, raw, natural Determination of castor oil content Part 1: Determination of castor oil glyceride content by thin-layer chromatography Second Edition Rubber, Raw, Natural - Determination of Castor Oil Content - Part 2: Determination of Total Ricinoleic Acid Content by Gas Chromatography Second Edition Chemical Products for Industrial Use - General Method for Determination of Chloride Ions - Potentiometric Method First Edition Chemical Products for Industrial Use - General Method for Determination of Traces of Sulphur Compounds, as Sulphate, by Reduction and Titrimetry First Edition; (Erratum-1981)

ISO

6230

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

6233 6235 6237 6238 6240 6241 6242-1 6242-2 6242-3 6243 6244 6245

ISO ISO ISO ISO ISO ISO ISO ISO ISO

6246 6247 6249 6250 6251 6255 6257 6258 6259-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

6259-2 6259-3 6260 6261 6262-1 6262-2 6263 6264 6265 6266 6267

Manganese Ores - Determination of Size Distribution by Sieving First Edition Manganese Ores and Concentrates - Determination of Calcium and Magnesium Contents - EDTA Titrimetric Method First Edition Rubber, Raw - Determination of Block Polystyrene Content - Ozonolysis Method Second Edition Adhesives Wood-to-wood adhesive bonds Determination of shear strength by tensile loading Second Edition Adhesives - Wood-To-Wood Adhesive Bonds - Determination of Shear Strength by Compressive Loading Second Edition Performance Standards in Building - Contents and Presentation First Edition; (Erratum-1981) Performance Standards in Building - Principles for Their Preparation and Factors to Be Considered First Edition Building Construction - Expression of Users┤ Requirements - Part 1: Thermal Requirements First Edition Building Construction - Expression of Users┤ Requirements - Part 2: Air Purity Requirements First Edition Building Construction - Expression of Users┤ Requirements - Part 3: Acoustical Requirements First Edition Climatic Data for Building Design - Proposed System of Symbols First Edition Petroleum Waxes and Petrolatums - Determination of Drop Melting Point First Edition Petroleum Products - Determination of Ash Third Edition Petroleum Products - Gum Content of Light and Middle Distillate Fuels - Jet Evaporation Method Second Edition; Technical Corrigendum 1: 11-15-1998 Petroleum Products - Determination of Foaming Characteristics of Lubricating Oils First Edition; Corrigendum 1: 09/15/1999 Petroleum Products - Determination of Thermal Oxidation Stability of Gas Turbine Fuels - JFTOT Method Second Edition Petroleum Products - Determination of the Water Reaction of Aviation Fuels Second Edition Liquefied Petroleum Gases - Corrosiveness to Copper - Copper Strip Test Second Edition Passenger Cars - Rear-Window Washing and Wiping Systems - Test Methods Second Edition Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Sampling Second Edition Nuclear Power Plants - Design Against Seismic Hazards First Edition Thermoplastics Pipes - Determination of Tensile Properties - Part 1: General Test Method First Edition Thermoplastics Pipes - Determination of Tensile Properties - Part 2: Pipes Made of Unplasticized Poly(Vinyl Chloride) (PVC-U), Chlorinated Poly(Vinyl Chloride) (PVC-C) and High-Impact Poly(Vinyl Chloride) (PVC-HI) First Edition Thermoplastics Pipes - Determination of Tensile Properties - Part 3: Polyolefin Pipes First Edition Mail Payment Orders First Edition Boring Bars (Tool Holders with Cylindrical Shank) for Indexable Inserts - Designation Second Edition End Mills with Indexable Inserts - Part 1: End Mills with Flatted Parallel Shank First Edition End Mills with Indexable Inserts - Part 2: End Mills with Morse Taper Shank First Edition Hydraulic Fluid Power - Compensated Flow-Control Valves - Mounting Surfaces Second Edition Hydraulic Fluid Power - Pressure-Relief Valves - Mounting Surfaces Second Edition Alpine Skis - Determination of Deformation Load and Breaking Load Second Edition Alpine Skis - Determination of Fatigue Indexes - Cyclic Loading Test First Edition Alpine Skis - Measurement of Bending Vibrations First Edition

ISO

6270-1

ISO

6270-2

ISO ISO

6271-1 6271-2

ISO

6272-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

6272-2 6274 6279 6280 6281 6282 6283 6284 6286 6289 CORR 1 6289

ISO ISO ISO ISO ISO

6293-1 6293-2 6296 6297 6299

ISO

6301-1

ISO ISO

6301-2 6302

Paints and Varnishes - Determination of Resistance to Humidity - Part 1: Continuous Condensation First Edition Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres First Edition Clear liquids Estimation of colour by the platinum-cobalt scale Part 1: Visual method First Edition; Cancels and Replaces ISO 6271:1997 Clear liquids Estimation of colour by the platinum-cobalt scale Part 2: Spectrophotometric method First Edition Paints and Varnishes - Rapid-Deformation (Impact Resistance) Tests - Part 1: Falling-Weight Test, Large-Area Indenter First Edition; Replaces ISO 6272 Paints and Varnishes - Rapid-Deformation (Impact Resistance) Tests - Part 2: Falling-Weight Test, Small-Area Indenter First Edition; Replaces ISO 6272 Concrete - Sieve Analysis of Aggregates First Edition Plain Bearings - Aluminium Alloy for Solid Bearings Second Edition Plain Bearings - Requirements on Backings for Thick-Walled Multilayer Bearings First Edition Plain bearings ù Testing under conditions of hydrodynamic and mixed lubrication in test rigs [Replaced: ISO TR 6281] Plain Bearings - Metallic Thin-Walled Half Bearings - Determination of the Conductivity 0,01-Limit First Edition Refined Nickel Second Edition Construction Drawings - Indication of Limit Deviations Second Edition Molecular Absorption Spectrometry - Vocabulary - General - Apparatus First Edition Skis ù Vocabulary TECHNICAL CORRIGENDUM 1 Skis ù Vocabulaire RECTIFICATIF TECHNIQUE 1 Second Edition Skis - Vocabulary Skis - Vocabulaire Second Edition Petroleum Products - Determination of Saponification Number - Part 1: Colour-Indicator Titration Method First Edition; Supersedes ISO 6293: 1983 Petroleum Products - Determination of Saponification Number - Part 2: Potentiometric Titration Method First Edition Petroleum Products - Determination of Water - Potentiometric Karl Fischer Titration Method First Edition Petroleum Products - Aviation and Distillate Fuels - Determination of Electrical Conductivity Second Edition Petroleum Products - Determination of Dropping Point of Lubricating Greases (Wide Temperature Range) First Edition Pneumatic Fluid Power - Compressed Air Lubricators - Part 1: Main Characteristics to Be Included in Supplier┤s Literature and Product-Marking Requirements Second Edition Pneumatic Fluid Power - Compressed Air Lubricators - Part 2: Test Methods to Determine the Main Characteristics to be Included in Supplier's Literature Second Edition Earth-Moving Machinery - Drain, Fill and Level Plugs Third Edition

ISO ISO ISO

6303 6305-2 6305-3

Pressure Vessel Steels Not Included in ISO 2604, Parts 1 to 6 - Derivation of Long-Time Stress Rupture Properties First Edition Railway components ù Technical delivery requirements ù Part 2: Non-alloy carbon steel baseplates Second Edition Railway Components - Technical Delivery Requirements - Part 3: Steel Sleepers First Edition

Railway Components - Technical Delivery Requirements - Part 4: Untreated Steel Nuts and Bolts and High-Strength Nuts and Bolts for Fish-Plate and Fastenings First Edition Gypsum Plasterboard - Specification First Edition

ISO ISO

6305-4 6308

ISO ISO ISO

6309 6310 6311

Fire protection - Safety signs Protection contre l'incendie - Signaux de securite First Edition; Corrected and Reprinted 9/10/1987 Road Vehicles - Brake Linings - Compressive Strain Test Method Second Edition Road Vehicles - Brake Linings - Internal Shear Strength of Lining Material - Test Procedure First Edition

ISO ISO ISO ISO ISO ISO

6312 6313 6314 6315 6316 6317

Road Vehicles - Brake Linings - Shear Test Procedure for Disc Brake Pad and Drum Brake Shoe Assemblies Second Edition Road Vehicles - Brake Linings - Effects of Heat on Dimensions and Form of Disc Brake Pads - Test Procedure First Edition Road Vehicles - Brake Linings - Resistance to Water, Saline Solution, Oil and Brake Fluid - Test Procedure First Edition Road Vehicles - Brake Linings - Seizure to Ferrous Mating Surface Due to Corrosion - Test Procedure First Edition Hot-Rolled Steel Strip of Structural Quality Third Edition Hot-Rolled Carbon Steel Strip of Commercial and Drawing Qualities Second Edition

ISO ISO ISO ISO ISO ISO ISO

6320 6321 6322-1 6322-2 6322-3 6325 6326-1

ISO ISO

6326-3 6326-5

Animal and Vegetable Fats and Oils - Determination of Refractive Index Fourth Edition; Technical Corrigendum 1: 03/15/2006 Animal and Vegetable Fats and Oils - Determination of Melting Point in Open Capillary Tubes (Slip Point) Second Edition Storage of Cereals and Pulses - Part 1: General Recommendations for the Keeping of Cereals Second Edition Storage of Cereals and Pulses - Part 2: Practical Recommendations Second Edition Storage of Cereals and Pulses - Part 3: Control of Attack by Pests Second Edition Shipbuilding - Cable Stoppers Second Edition Natural gas ù Determination of sulfur compounds ù Part 1: General introduction Second Edition Natural Gas - Determination of Sulfur Compounds - Part 3: Determination of Hydrogen Sulfide, Mercaptan Sulfur and Carbonyl Sulfide Sulfur by Potentiometry First Edition Natural Gas - Determination of Sulfur Compounds - Part 5: Lingener Combustion Method First Edition

ISO

6327

Gas Analysis - Determination of the Water Dew Point of Natural Gas - Cooled Surface Condensation Hygrometers First Edition

ISO ISO ISO ISO

6328 6330 6331 6332

Photography - Photographic Materials - Determination of ISO Resolving Power Second Edition; Corrected and Reprinted 09/01/2000 Textiles - Domestic Washing and Drying Procedures for Textile Testing Second Edition Chromium Ores and Concentrates - Determination of Chromium Content - Titrimetric Method First Edition Water Quality - Determination of Iron - Spectrometric Method Using 1,10-Phenanthroline Second Edition

ISO

6333

ISO

6336-1

Water Quality - Determination of Manganese - Formaldoxime Spectrometric Method First Edition; (Corrected and Reprinted - 1986) Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors Second Edition

ISO ISO ISO ISO ISO

6336-2 6336-3 6336-5 6336-6 6340

Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) Second Edition Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength Second Edition Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials Second Edition Calculation of load capacity of spur and helical gears - Part 6: Calculation of service life under variable load First Edition Water Quality - Detection of Salmonella Species First Edition Water Quality - Determination of the Inhibition of the Mobility of Daphnia Magna Straus (Cladocera, Crustacea) - Acute Toxicity Test Third Edition; Technical Corrigendum 1-1998 Micrographics - Aperture Cards - Method of Measuring Thickness of Buildup Area Second Edition

ISO ISO

6341 6342

ISO

6344-1

Coated Abrasives - Grain Size Analysis - Part 1: Grain Size Distribution Test First Edition; Corrected and Reprinted 02/01/1999

ISO

6344-2

ISO ISO ISO ISO ISO

6344-3 6345 6346 6347 6348

ISO ISO ISO ISO ISO

6351 6352 6353-1 6353-2 6353-3

Coated Abrasives - Grain Size Analysis - Part 2: Determination of Grain Size Distribution of Macrogrits P12 to P220 First Edition Coated Abrasives - Grain Size Analysis - Part 3: Determination of Grain Size Distribution of Microgrits P240 to P2500 First Edition; Technical Corrigendum 1: 03-01-1999 Shipbuilding and Marine Structures - Windows and Side Scuttles - Vocabulary First Edition Freight Containers - Coding, Identification and Marking Third Edition CEN EN ISO 6346: 1995; SNZ NZS/ISO: 1984 Textile Floor Coverings - Consumer Information Second Edition Textiles - Determination of Mass - Vocabulary First Edition Nickel - Determination of Silver, Bismuth, Cadmium Cobalt, Copper, Iron, Manganese, Lead and Zinc Contents - Flame Atomic Absorption Spectrometric Method First Edition Ferronickel - Determination of Nickel Content - Dimethylglyoxime Gravimetric Method First Edition Reagents for Chemical Analysis - Part 1: General Test Methods First Edition Reagents for Chemical Analysis - Part 2: Specifications - First Series First Edition; Addendum 2: 1986 Reagents for Chemical Analysis - Part 3: Specifications - Second Series First Edition

ISO ISO ISO

6356 6357 6358

ISO ISO ISO ISO

6360-1 CORR 1 6360-1 6360-2 6360-3

ISO

6360-4

Textile Floor Coverings - Assessment of Static Electrical Propensity - Walking Test First Edition; Replaces ISO TR 6356: 1982 Documentation - Spine Titles on Books and Other Publications First Edition Pneumatic Fluid Power - Components Using Compressible Fluids - Determination of Flow-Rate Characteristics First Edition Dentistry ù Number coding system for rotary instruments ù Part 1: General characteristics, TECHNICAL CORRIGENDUM 1 Second Edition Dentistry Number coding system for rotary instruments Part 1: General characteristics Second Edition Dentistry Number coding system for rotary instruments Part 2: Shapes Second Edition Dentistry Number coding system for rotary instruments Part 3: Specific characteristics of burs and cutters First Edition Dentistry Number coding system for rotary instruments Part 4: Specific characteristics of diamond instruments First Edition

ISO

6360-6

Dentistry Number coding system for rotary instruments Part 6: Specific characteristics of abrasive instruments First Edition Dentistry Number coding system for rotary instruments Part 7: Specific characteristics of mandrels and special instruments First Edition Wrought Aluminium and Aluminium Alloys Sheets, Strips and Plates - Part 1: Technical Conditions for Inspection and Delivery First Edition; Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates - Part 2: Mechanical Properties Second Edition; Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates - Part 3: Strips - Tolerances on Shape and Dimensions First Edition Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates - Part 4: Sheets and Plates - Tolerances on Shape and Dimensions First Edition; Wrought Aluminium and Aluminium Alloys Extruded Rods/Bars, Tubes and Profiles - Part 1: Technical Conditions for Inspection and Delivery First Edition;

ISO

6360-7

ISO ISO

6361-1 6361-2

ISO

6361-3

ISO

6361-4

ISO

6362-1

ISO

6362-2

ISO

6362-3

ISO

6362-4

ISO

6362-5

ISO ISO

6363-1 6363-2

ISO

6363-4

ISO

6363-5

Wrought Aluminium and Aluminium Alloy Extruded Rods/Bars, Tubes and Profiles - Part 2: Mechanical Properties Second Edition Wrought Aluminium and Aluminium Alloy Extruded Rods/Bars, Tubes and Profiles - Part 3: Extruded Rectangular Bars - Tolerances on Shape and Dimensions Second Edition Wrought Aluminium and Aluminium Alloy Extruded Rods/Bars, Tubes and Profiles - Part 4: Extruded Profiles - Tolerances on Shape and Dimensions First Edition Wrought Aluminium and Aluminium Alloy Extruded Rods/Bars, Tubes and Profiles - Part 5: Extruded Round, Square and Hexagonal Bars - Tolerances on Shape and Dimensions Second Edition Wrought Aluminium and Aluminium Alloy Cold-Drawn Rods/Bars and Tubes - Part 1: Technical Conditions for Inspection and Delivery First Edition; Wrought Aluminium and Aluminium Alloy Cold-Drawn Rods/Bars and Tubes - Part 2: Mechanical Properties First Edition; Wrought Aluminium and Aluminium Alloy Cold-Drawn Rods/Bars and Tubes - Part 4: Drawn Rectangular Bars - Tolerances on Form and Dimensions First Edition Wrought Aluminium and Aluminium Alloy Cold-Drawn Rods/Bars and Tubes - Part 5: Drawn Square and Hexagonal Bars Tolerances on Form and Dimensions First Edition

ISO

6365-1

Wrought Aluminium and Aluminium Alloy Cold-Drawn Wire - Part 1: Technical Conditions for Inspection and Delivery First Edition;

ISO

6370-1

ISO ISO ISO

6370-2 6372-1 6372-2

Vitreous and Porcelain Enamels - Determination of the Resistance to Abrasion - Part 1: Abrasion Testing Apparatus First Edition Vitreous and Porcelain Enamels - Determination of the Resistance to Abrasion - Part 2: Loss in Mass After Sub-Surface Abrasion First Edition Nickel and Nickel Alloys - Terms and Definitions - Part 1: Materials First Edition Nickel and Nickel Alloys - Terms and Definitions - Part 2: Refinery Products First Edition

ISO

6372-3

ISO ISO

6374 6375

ISO ISO ISO ISO ISO ISO

6376 6382 6383-1 6383-2 6384 6385

ISO ISO ISO ISO

6387 6388 6392-1 6392-2

ISO

6393

ISO

6394

ISO

6395

ISO

6396

ISO

6401

ISO

6402-1

ISO ISO ISO

6402-2 6403 6405-1

Nickel and Nickel Alloys - Terms and Definitions - Part 3: Wrought Products and Castings First Edition Cryolite, Natural and Artificial, and Aluminium Fluoride for Industrial Use - Determination of Phosphorus Content - Atomic Absorption Spectrometric Method After Extraction First Edition Carbonaceous Materials for the Production of Aluminium - Cokes for Electrodes - Sampling First Edition Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Content of Toluene-Insoluble Material First Edition General Method for Determination of Silicon Content - Reduced Molybdosilicate Spectrophotometric Method First Edition Plastics - Film and Sheeting - Determination of Tear Resistance - Part 1: Trouser Tear Method First Edition Plastics - Film and Sheeting - Determination of Tear Resistance - Part 2: Elmendorf Method First Edition Surface Active Agents - Technical Ethoxylated Fatty Amines - Methods of Analysis First Edition Ergonomic principles in the design of work systems Second Edition Surface Active Agents - Determination of the Power to Disperse Calcium Soap - Acidimetric Method (Modified Schonfeldt Method) First Edition Surface Active Agents - Determination of Flow Properties Using a Rotational Viscometer Second Edition Earth Moving Machinery - Lubrication Fittings - Part 1: Nipple Type First Edition; Supersedes ISO 6392: 1980 Earth-Moving Machinery - Lubrication Fittings - Part 2: Grease-Gun Nozzles First Edition; Replaced by ISO 6392 Acoustics - Measurement of Exterior Noise Emitted by Earth-Moving Machinery - Stationary Test Conditions Second Edition Acoustics - Measurement at the Operator┤s Position of Noise Emitted by Earth-Moving Machinery - Stationary Test Conditions Second Edition Acoustics - Measurement of Exterior Noise Emitted by Earth-Moving Machinery - Dynamic Test Conditions First Edition; SAE J 2104; Amendment 1 12-15-1996 Acoustics - Measurement at the Operator┤s Position of Noise Emitted by Earth-Moving Machinery - Dynamic Test Conditions First Edition Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Determination of Residual Vinyl Chloride Monomer - Gas Chromatographic Method First Edition Plastics - Acrylonitrile-Styrene-Acrylate (ASA), Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Fourth Edition Plastics Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties Second Edition Hydraulic Fluid Power - Valves Controlling Flow and Pressure - Test Methods First Edition; (Corrected and Reprinted - 1989) Earth-Moving Machinery - Symbols for Operator Controls and Other Displays - Part 1: Common Symbols Second Edition

ISO ISO ISO ISO ISO ISO

6405-2 6406 6410-1 6410-2 6410-3 6411

ISO

6412-1

ISO

6412-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO

6412-3 6413 6414 6415 6416 6420 6422 6425 6426-1

ISO

6426-2 CORR 1

ISO ISO ISO

6426-2 6428 6429

ISO ISO ISO ISO ISO ISO ISO

6432 6433 6437 6438 6439 6442 6443

Earth-moving machinery Symbols for operator controls and other displays Part 2: Specific symbols for machines, equipment and accessories AMENDMENT 2: Additional symbols First Edition; Amendment 1: 8/15/1997; Amendment 2: 12/1/2004 Gas cylinders Seamless steel gas cylinders Periodic inspection and testing Second edition Technical Drawings - Screw Threads and Threaded Parts - Part 1: General Conventions First Edition Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread Inserts First Edition Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified Representation First Edition Technical Drawings - Simplified Representation of Centre Holes First Edition Technical Drawings - Simplified Representation of Pipelines - Part 1: General Rules and Orthogonal Representation First Edition; (CEN EN ISO 6412-1: 1994) Technical Drawings - Simplified Representation of Pipelines - Part 2: Isometric Projection First Edition; (CEN EN ISO 6412-2: 1994) Technical Drawings - Simplified Representation of Pipelines - Part 3: Terminal Features of Ventilation and Drainage Systems First Edition; (CEN EN ISO 6412-3: 1996) Technical Drawings - Representation of Splines and Serrations First Edition; (CEN EN ISO 6413: 1994) Technical Drawings for Glassware First Edition Internal combustion engines - Spin-on filters for lubricating oil - Dimensions Third edition Hydrometry Measurement of discharge by the ultrasonic (acoustic) method Third Edition Liquid Flow Measurement in Open Channels - Position Fixing Equipment for Hydrometric Boats First Edition Layout Key for Trade Documents First Edition Divers┤ Watches Third Edition Horological Vocabulary - Part 1: Technical and Scientific Definitions First Edition Horological vocabulary ù Part 2: Technical and commercial definitions Vocabulaire horloger ù Partie 2: DÚfinitions technicocommerciales Second Edition Horological vocabulary ù Part 2: Technical and commercial definitions Vocabulaire horloger ù Partie 2: DÚfinitions technicocommerciales Second Edition Technical Drawings - Requirements for Microcopying First Edition Information Technology - Control Functions for Coded Character Sets Third Edition Pneumatic Fluid Power - Single Rod Cylinders - 10 Bar (1 000 kPa) Series - Bores from 8 to 25 mm - Mounting Dimensions First Edition Technical Drawings - Item References First Edition; (CEN EN ISO 6433: 1994) Copper Alloys - Determination of Chromium Content - Titrimetric Method First Edition Documentation - African Coded Character Set for Bibliographic Information Interchange First Edition Water Quality - Determination of Phenol Index - 4-Aminoantipyrine Spectrometric Methods After Distillation Second Edition Door leaves - General and local flatness - Measurement method Second Edition Door leaves Method for measurement of height, width, thickness and squareness Second Edition

ISO ISO ISO ISO ISO ISO ISO

6444 6445 6446 6447 6448 6450 6451

ISO ISO ISO

6452 6453 6454

ISO

6455

ISO

6460-1

ISO

6461-1

ISO ISO

6461-2 6462

ISO ISO

6463 6465

ISO ISO

6466 6467

ISO ISO

6468 6469-1

ISO

6469-2

ISO ISO ISO

6469-3 6472 6474

Door leaves - Determination of the behaviour under humidity variations in successive uniform climates Second Edition Doors - Behaviour between two different climates - Test method Second Edition Rubber Products - Bridge Bearings - Specification for Rubber Materials First Edition Rubber Seals - Joint Rings Used for Gas Supply Pipes and Fittings - Specification for Material First Edition Rubber Seals - Joint Rings Used for Petroleum Product Supply Pipes and Fittings - Specification for Material First Edition Rubber- or plastics-coated fabrics Determination of resistance to liquids First Edition Plastics Coated Fabrics - Polyvinyl Chloride Coatings - Rapid Method for Checking Fusion First Edition Rubber- or Plastics-Coated Fabrics - Determination of Fogging Characteristics of Trim Materials in the Interior of Automobiles Second Edition Polymeric Materials, Cellular Flexible - Polyvinylchloride Foam Sheeting - Specification First Edition Shipbuilding - Strum Boxes First Edition Unplasticized Polyvinyl Chloride (PVC) Fittings with Elastic Sealing Ring Type Joints for Pipes Under Pressure - Dimensions of Laying Lengths - Metric Series First Edition Motorcycles ù Measurement method for gaseous exhaust emissions and fuel consumption ù Part 1: General test requirements First Edition [Cancelled: ISO 6460] Water Quality - Detection and Enumeration of the Spores of Sulfite-Reducing Anaerobes (Clostridia) - Part 1: Method by Enrichment in a Liquid Medium First Edition; (CEN EN 26461-1: 1993) Water Quality - Detection and Enumeration of the Spores of Sulfite-Reducing Anaerobes (Clostridia) - Part 2: Method by Membrane Filtration First Edition; (CEN EN 26461-2: 1993) Face Milling Cutters with Indexable Inserts - Dimensions First Edition; (ANSI 6462-1983) Animal and Vegetable Fats and Oils - Determination of Butylhydroxyanisole (BHA) and Butylhydroxytoluene (BHT) - Gas-Liquid Chromatographic Method First Edition Whole Cumin (Cuminum Cyminum Linnaeus) - Specification First Edition Tobacco and Tobacco Products - Determination of Dithiocarbamate Pesticides Residues - Molecular Absorption Spectrometric Method First Edition Ferrovanadium - Determination of Vanadium Content - Potentiometric Method First Edition Water Quality - Determination of Certain Organochlorine Insecticides, Polychlorinated Biphenyls and Chlorobenzenes - Gas Chromatographic Method After Liquid-Liquid Extraction First Edition Electric Road Vehicles - Safety Specifications - Part 1 On-Board Electrical Energy Storage First Edition Electric Road Vehicles - Safety Specifications - Part 2: Functional Safety Means and Protection Against Failures First Edition Electric road vehicles Safety specifications Part 3: Protection of persons against electric hazards First Edition; Corrigendum 1: 04/15/2003 Rubber Compounding Ingredients - Abbreviations Third Edition Implants for Surgery - Ceramic Materials Based on High Purity Alumina Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

6475 6477 6478 6479 6480 6481 6482 6483 6484 6485

ISO

6486-1

ISO ISO ISO

6486-2 6487 6488

ISO

6489-1

ISO ISO

6489-2 6489-3

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

6489-4 6490-1 6491 6492 6493 6495 6496 6497 6498 6501 6502 6503

Implants for Surgery - Metal Bone Screws with Asymmetrical Thread and Spherical Under-Surface - Mechanical Requirements and Test Methods First Edition Cashew Kernels - Specification First Edition Peanuts - Specification First Edition Shelled Sweet Kernels of Apricots - Specification First Edition; Technical Corrigendum 1: 12/15/1999 Conditions of Acceptance for Horizontal Internal Broaching Machines - Testing of the Accuracy Second Edition Acceptance Conditions for Vertical Surface Type Broaching Machines - Testing of Accuracy First Edition Shipbuilding - Deck Machinery - Warping End Profiles First Edition Earth-Moving Machinery - Dumper Bodies - Volumetric Rating First Edition Earth-Moving Machinery - Elevating Scrapers - Volumetric Ratings Second Edition Earth-Moving Machinery - Tractor-Scraper Volumetric Rating First Edition Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 1: Test Method Second Edition Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible Limits Second Edition Road Vehicles - Measurement Techniques in Impact Tests - Instrumentation Fourth Edition Tobacco - Determination of Water Content - Karl Fischer Method Second Edition; Agricultural Vehicles - Mechanical Connections between Towed and Towing Vehicles - Part 1: Dimensions of Hitch-Hooks Third Edition Agricultural Vehicles - Mechanical Connections between Towed and Towing Vehicles - Part 2: Specification for Clevis Coupling 40 Second Edition Agricultural vehicles Mechanical connections between towed and towing vehicles Part 3: Tractor drawbar Second Edition Agricultural vehicles Mechanical connections between towed and towing vehicles Part 4: Dimensions of piton-type coupling First Edition Animal Feeding Stuffs - Determination of Calcium Content - Part 1: Titrimetric Method First Edition Animal Feeding Stuffs - Determination of Phosphorus Content - Spectrophotometric Method Second Edition Animal Feeding Stuffs - Determination of Fat Content First Edition Animal Feeding Stuffs - Determination of Starch Content - Polarimetric Method First Edition Animal Feeding Stuffs - Determination of Water-Soluble Chlorides Content Second Edition Animal Feeding Stuffs - Determination of Moisture and Other Volatile Matter Content Second Edition Animal feeding stuffs Sampling First Edition Animal Feeding Stuffs - Preparation of Test Samples Second Edition Ferronickel - Specification and Delivery Requirements First Edition Rubber - Guide to the Use of Curemeters Third Edition Paints and Varnishes - Determination of Total Lead - Flame Atomic Absorption Spectrometric Method First Edition

ISO

6504-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO

6504-3 6505 6506-1 6506-2 6506-3 6506-4 6507-1 6507-2 6507-3

ISO ISO

6507-4 6508-1

ISO

6508-2

ISO ISO ISO ISO

6508-3 6509 6511 6512

ISO ISO ISO

6513 6514 6516

ISO

6517

ISO

6518-1

ISO ISO

6518-2 6519

Paints and Varnishes - Determination of Hiding Power - Part 1: Kubelka-Munk Method for White and Light Coloured Paints First Edition Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of lightcoloured paints at a fixed spreading rate Second Edition Rubber, Vulcanized or Thermoplastic - Determination of Tendency to Adhere to and to Corrode Metals Third edition Metallic materials - Brinell hardness test - Part 1: Test method Second edition Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines Second edition Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks Second edition Metallic materials Brinell hardness test Part 4: Table of hardness values First edition; Partly Replaces ISO 6506-1:1999 Metallic materials Vickers hardness test Part 1: Test method Third Edition Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines Third Edition Metallic materials Vickers hardness test Part 3: Calibration of reference blocks Third Edition Metallic materials Vickers hardness test Part 4: Tables of hardness values First Edition; Cancels and Replaces ISO 6507-1: 1997 Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) Second Edition Metallic materials Rockwell hardness test Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) Second Edition Metallic materials Rockwell hardness test Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) Second Edition Corrosion of Metals and Alloys - Determination of Dezincification Resistance of Brass First Edition Building Construction - Modular Coordination - Modular Floor Plane for Vertical Dimensions First Edition; (PNS 642: 1988) Building Construction - Modular Coordination - Storey Heights and Room Heights First Edition Building Construction - Modular Coordination - Series of Preferred Multimodular Sizes for Horizontal Dimensions First Edition; (PNS 640: 1988) Building Construction - Modular Coordination - Sub-Modular Increments First Edition; (PNS 643: 1988) Photography - Photographic Lenses - Distance Scale Markings First Edition Air Cargo Equipment - Base-Restrained Certified Containers Exclusively for the Lower Deck of High-Capacity Aircraft Second Edition Road Vehicles - Ignition Systems - Part 1: Vocabulary Vehicules Routiers - Systemes D┤allumage - Partie 1: Vocabulaire Third Edition Road Vehicles - Ignition Systems - Part 2: Electrical Performance and Function Test Methods Second Edition; Corrigendum 1 02/15/1997 Diesel engines Fuel injection pumps Tapers for shaft ends and hubs Third Edition

ISO

6520-1

ISO ISO

6520-2 6522

ISO

6523-1

ISO ISO ISO ISO ISO ISO ISO ISO

6523-2 6524 6525 6526 6527 6528-1 6528-2 6528-3

ISO

6529

ISO

6530

ISO ISO ISO ISO ISO ISO ISO

6531 6532 6533 6534 6535 6536 6537

ISO

6538

ISO ISO

6539 6540

Schwei▀en und verwandte Prozesse ù Einteilung von geometrischen Unregelmõ▀igkeiten an metallischen Werkstoffen ù Teil 1: Schmelzschwei▀en Welding and allied processes ù Classification of geometric imperfections in metallic materials ù Part 1: Fusion welding Soudage et techniques connexes ù Classification des dÚfauts gÚomÚtriques dans les soudures des matÚriaux mÚtalliques ù Partie 1: Soudage par fusion Second Edition Welding and Allied Processes - Classification of Geometric Imperfections in Metallic Materials - Part 2: Welding with Pressure First Edition Information Technology - Programming Languages - PL/I General Purpose Subset Second Edition Information Technology - Structure for the Identification of Organizations and Organization Parts - Part 1: Identification of Organization Identification Schemes First Edition Information Technology - Structure for the Identification of Organizations and Organization Parts - Part 2: Registration of Organization Identification Schemes First Edition Plain Bearings - Thin-Walled Half-Bearings - Checking of Peripheral Length Second Edition Plain Bearings - Ring Type Thrust Washers Made from Strip - Dimensions and Tolerances First Edition Plain Bearings - Pressed Bimetallic Half Thrust Washers - Features and Tolerances First Edition Nuclear Power Plants - Reliability Data Exchange - General Guidelines First Edition Rubber - Determination of Total Sulfur Content - Part 1: Oxygen Combustion Flask Method Second Edition Rubber - Determination of Total Sulfur Content - Part 2: Sodium Peroxide Fusion Method Second Edition Rubber - Determination of Total Sulfur Content - Part 3: Furnace Combustion Method First Edition Protective Clothing - Protection Against Chemicals - Determination of Resistance of Protective Clothing Materials to Permeation by Liquids and Gases Second Edition Protective clothing Protection against liquid chemicals Test method for resistance of materials to penetration by liquids Third Edition Machinery for Forestry - Portable Hand-Held Chain-Saws - Vocabulary Materiel Forestier - Scies A Chaine Portatives - Vocabulaire Second Edition Portable Chain Saws - Technical Data Second Edition; (Corrected and Reprinted - 1994) Forestry Machinery - Portable Chain-Saw Front Hand-Guard - Dimensions and Clearances Third Edition Forestry machinery ù Portable chain-saw hand-guards ù Mechanical strength third Edition Portable chain-saws Chain brake performance Second Edition; Technical Corrigendum 1: 9/1/2004 Bank Operations - Standard Scheme for Drawing Lists First Edition; (Erratum-1982) Pneumatic Fluid Power Systems - Cylinder Barrels - Requirements for Non-Ferrous Metallic Tubes First Edition Cassia, Chinese Type, Indonesian Type and Vietnamese Type [Cinnamomum Aromaticum (Nees) Syn. Cinnamomum Cassia (Nees) ex Blume, Cinnamomum Burmanii (C.G.Nees) Blume and Cinnmomum Loureirii Nees] - Specification Second Edition Cinnamon, Sri Lankan Type, Seychelles Type and Madagascan Type (Cinnamomum Zeylanicum Blume) - Specification Second Edition Maize - Determination of Moisture Content (on Milled Grains and on Whole Grains) First Edition

ISO

6541

ISO ISO ISO

6544 6545 6546

ISO ISO

6547 6549

ISO

6550-1

ISO

6550-2

ISO

6550-3

ISO

6550-4

ISO ISO ISO ISO ISO ISO ISO

6551 6552 6553 6554 6555 6556 6557-1

ISO ISO

6557-2 6558-2

ISO

6560

ISO

6561-1

ISO ISO

6561-2 6564

ISO

6565

Agricultural Food Products - Determination of Crude Fibre Content - Modified Scharrer Method First Edition Hand-Held Pneumatic Assembly Tools for Installing Threaded Fasteners - Reaction Torque and Torque Impulse Measurements First Edition Acceptance Conditions for Gear Hobbing Machines - Testing of the Accuracy First Edition Road vehicles Collection of accident data for evaluation of occupant restraint performance First Edition Hydraulic Fluid Power - Cylinders - Piston Seal Housings Incorporating Bearing Rings - Dimensions and Tolerances First Edition Road Vehicles - Procedure for H- and R-Point Determination Second Edition Road Vehicles - Sheath-Type Glow-Plugs with Conical Seating and Their Cylinder Head Housing - Part 1: M14 X 1,25 Glow-Plugs First Edition; Road Vehicles - Sheath-Type Glow Plugs with Conical Seating and Their Cylinder Head Housing - Part 2: M12 X 1,25 Glow-Plugs First Edition; Road Vehicles - Sheath-Type Glow-Plugs with Conical Seating and Their Cylinder Head Housing - Part 3: M10 Glow-Plugs Second Edition Road Vehicles - Sheath-Type glow-plugs with conical seating and their cylinder head housing - Part 4: M8 x 1 glow-plugs First edition Petroleum Liquids and Gases - Fidelity and Security of Dynamic Measurement - Cabled Transmission of Electric and/or Electronic Pulsed Data First Edition; (NZS/ISO 6551: 1982) (CEN EN ISO 6551: 1995) Automatic Steam Traps - Definition of Technical Terms First Edition Automatic Steam Traps - Marking First Edition Flanged Automatic Steam Traps - Face-to-Face Dimensions First Edition Shipbuilding - Topping Winches Second Edition Laboratory Glassware - Filter Flasks First Edition Fruits, Vegetables and Derived Products - Determination of Ascorbic Acid - Part 1: Reference Method First Edition Fruits, Vegetables and Derived Products - Determination of Ascorbic Acid Content - Part 2: Routine Methods First Edition; (Withdrawn) First Edition Fruits, Vegetables and Derived Products - Determination of Carotene Content - Part 2: Routine Methods First Edition Fruit and Vegetable Products - Determination of Benzoic Acid Content (Benzoic Acid Contents Greater Than 200 mg per Litre or per Kilogram) - Molecular Absorption Spectrometric Method First Edition Fruits, vegetables and derived products Determination of cadmium content Part 1: Method using graphite furnace atomic absorption spectrometry First Edition; Together with ISO 6561-2:2005 Replaces ISO 6561: 1983 Fruits, vegetables and derived products Determination of cadmium content Part 2: Method using flame atomic absorption spectrometry First Edition; Together with ISO 6561-1: 2005 Replaces ISO 6561: 1983 Sensory Analysis - Methodology - Flavour Profile Methods First Edition Tobacco and Tobacco Products - Draw Resistance of Cigarettes and Pressure Drop of Filter Rods - Standard Conditions and Measurement Third Edition

ISO ISO ISO ISO ISO ISO ISO

6570 6571 6574 6575 6576 6577 6578

ISO ISO ISO ISO

6579 AMD 1 6579 CORR 1 6579 6580

ISO ISO ISO ISO ISO

6581 6582 6584 6586 6587

ISO

6588-1

ISO ISO ISO

6588-2 6589 6590-1

ISO

6590-2

ISO

6591-1

ISO ISO ISO

6591-2 6592 6594

ISO

6596-1

Natural Gas - Determination of Potential Hydrocarbon Liquid Content - Gravimetric Methods First Edition; Cancels and Replaces ISO 6570-1:1993 and ISO 6570-2:1984 Spices, Condiments and Herbs - Determination of Volatile Oil Content First Edition Celery Seed (Apium Graveolens Linnaeus) - Specification First Edition Fenugreek, Whole or Ground (Powdered) - Specification First Edition Laurel (Laurus nobilis L.) Whole and ground leaves Specification Second Edition Nutmeg, Whole or Broken, and Mace, Whole or in Pieces (Myristica Fragrans Houttuyn) - Specification Second Edition Refrigerated Hydrocarbon Liquids - Static Measurement - Calculation Procedure First Edition Microbiology of food and animal feeding stuffs ù Horizontal method for the detection of Salmonella spp. AMENDMENT 1: Annex D: Detection of Salmonella spp. in animal faeces and in environmental samples from the primary production stage Fourth Edition Microbiology of food and animal feeding stuffs ù Horizontal method for the detection of Salmonella spp. Fourth Edition Microbiology of food and animal feeding stuffs ù Horizontal method for the detection of Salmonella spp. Fourth Edition General-purpose industrial fans Circular flanges Dimensions Second edition Anodizing of Aluminium and Its Alloys - Determination of the Fastness to Ultra-Violet Light of Coloured Anodic Oxide Coatings First Edition Shipbuilding - Numerical Control of Machines - ESSI Format First Edition Cleaning Equipment for Air and Other Gases - Classification of Dust Separators First Edition Data Processing - Implementation of the ISO 7-Bit and 8-Bit Coded Character Sets on Punched Cards First Edition Paper, Board and Pulps - Determination of Conductivity of Aqueous Extracts Second Edition Paper, board and pulps - Determination of pH of aqueous extracts - Part 1: Cold extraction First edition; Together with ISO 6588-2 cancels and replaces ISO 6588:1981 Paper, board and pulps Determination of pH of aqueous extracts Part 2: Hot extraction First edition; Together with ISO 6588-1 cancels and replaces ISO 6588:1981 Joints in Building - Laboratory Method of Test for Air Permeability of Joints Second Edition Packaging - Sacks - Vocabulary and Types - Part 1: Paper Sacks First Edition; (CEN EN 26590-1: 1992) Packaging - Sacks - Vocabulary and Types - Part 2: Sacks Made from Thermoplastic Flexible Film First Edition; (CEN EN 26590-2: 1992) Packaging - Sacks - Description and Method of Measurement - Part 1: Empty Paper Sacks First Edition; (CEN EN 26591-1: 1992) Packaging - Sacks - Description and Method of Measurement - Part 2: Empty Sacks Made from Thermoplastic Flexible Film First Edition; (CEN EN 26591-2: 1992) Information Technology - Guidelines for the Documentation of Computer-Based Application Systems First Edition Cast iron drainage pipes and fittings Spigot series Second Edition Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Two-Frequency Recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on One Side - Part 1: Dimensional, Physical and Magnetic Characteristics Second Edition

ISO

6596-2

ISO ISO ISO ISO

6597 6598 6599-1 6601

Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Two-Frequency Recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on One Side - Part 2: Track Format First Edition Road vehicles - Hydraulic braking systems, including those with electronic control functions, for motor vehicles - Test procedures Fourth Edition Fertilizers - Determination of Phosphorus Content - Quinoline Phosphomolybdate Gravimetric Method First Edition Packaging - Sacks - Conditioning for Testing - Part 1: Paper Sacks First Edition; (CEN EN 26599-1: 1992) Plastics Friction and wear by slidingIdentification of test parameters Second edition

ISO

6603-1

Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 1: Non-Instrumented Impact Testing Second Edition

ISO ISO ISO

6603-2 6605 6606

Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 2: Instrumented Impact Testing Second Edition Hydraulic fluid power Hoses and hose assemblies Test methods Second Edition Aluminium Ores - Determination of Loss of Mass at 1 075 Degrees C - Gravimetric Method First Edition

ISO ISO

6607 6609

ISO ISO ISO ISO ISO

6611 6612 6613 6614 6615

ISO

6617

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

6618 6619 6621-1 6621-2 6621-3 6621-4 6621-5 6622-1 6623 6624-1

Aluminium Ores - Determination of Total Silicon Content - Combined Gravimetric and Spectrophotometric Method First Edition Aluminium Ores - Determination of Iron Content - Titrimetric Method First Edition Milk and Milk Products - Enumeration of Colony-Forming Units of Yeasts and/or Moulds - Colony-Count Technique at 25 Degrees C Second Edition; IDF 94 Windows and Door Height Windows - Wind Resistance Tests First Edition Windows and Door Height Windows - Air Permeability Test First Edition Petroleum Products - Determination of Water Separability of Petroleum Oils and Synthetic Fluids Second Edition Petroleum Products - Determination of Carbon Residue - Conradson Method Second Edition Petroleum-Based Lubricating Oils - Ageing Characteristics - Determination of Change in Conradson Carbon Residue After Oxidation First Edition Petroleum Products and Lubricants -Determination of Acid or Base Number - Colour-Indicator Titration Method Second Edition Petroleum Products and Lubricants - Neutralization Number - Potentiometric Titration Method First Edition Internal Combustion Engines - Piston Rings - Part 1: Vocabulary First Edition Internal combustion engines Piston rings Part 2: Inspection measuring principles Second Edition Internal Combustion Engines - Piston Rings - Part 3: Material Specifications Second Edition Internal combustion engines Piston rings Part 4: General specifications Second Edition Internal combustion engines - Piston rings - Part 5: Quality requirements Second Edition Internal combustion engines Piston rings Part 1: Rectangular rings made of cast iron Second Edition Internal combustion engines Piston rings Scraper rings made of cast iron Second Edition Internal Combustion Engines - Piston Rings - Part 1: Keystone Rings Made of Cast Iron Second Edition

ISO ISO ISO ISO ISO

6624-2 6624-3 6624-4 6625 6626

ISO ISO ISO ISO

6626-2 6629 6630 6632

ISO

6633

ISO

6634

ISO ISO

6635 6636-1

ISO ISO

6636-2 6636-3

ISO ISO

6637 6638-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO

6638-2 6639-1 6639-2 6639-3 6639-4 6644 6646 6647-1 6647-2

ISO

6651

Internal combustion engines Piston rings Part 2: Half keystone rings made of cast iron First Edition; Replaces ISO TR 6624-2:1988 Internal Combustion Engines - Piston Rings - Part 3: Keystone Rings Made of Steel First Edition Internal combustion engines Piston rings Part 4: Half keystone rings made of steel First Edition Internal Combustion Engines - Piston Rings - Oil Control Rings First Edition Internal Combustion Engines - Piston Rings - Coil-Spring-Loaded Oil Control Rings First Edition Internal Combustion Engines - Piston Rings - Part 2: Coil-Spring-Loaded Oil Control Rings of Narrow Width Made of Cast Iron First Edition Chromium Ores and Concentrates - Methods of Chemical Analysis - General Instructions First Edition Documentation - Bibliographic Control Characters First Edition Fruits, Vegetables and Derived Products - Determination of Volatile Acidity First Edition Fruits, Vegetables and Derived Products - Determination of Lead Content - Flameless Atomic Absorption Spectrometric Method First Edition; (PNS 586: 1992) Fruits, Vegetables and Derived Products - Determination of Arsenic Content - Silver Diethyldithiocarbamate Spectrophotometric Method First Edition; (PNS 587: 1992) Fruits, Vegetables and Derived Products - Determination of Nitrite and Nitrate Content - Molecular Absorption Spectrometric Method First Edition Fruits, Vegetables and Derived Products - Determination of Zinc Content - Part 1: Polarographic Method First Edition Fruits, Vegetables and Derived Products - Determination of Zinc Content - Part 2: Atomic Absorption Spectrometric Method First Edition; (PNS 588: 1992) Fruit and Vegetable Products - Determination of Zinc Content - Part 3: Dithizone Spectrometric Method First Edition Fruits, Vegetables and Derived Products - Determination of Mercury Content - Flameless Atomic Absorption Method First Edition Fruit and Vegetable Products - Determination of Formic Acid Content - Part 1: Gravimetric Method First Edition Fruit and Vegetable Products - Determination of Formic Acid Content - Part 2: Titrimetric Method First Edition; (Corrected and Reprinted - 1985) Cereals and Pulses - Determination of Hidden Insect Infestation - Part 1: General Principles First Edition Cereals and Pulses - Determination of Hidden Insect Infestation - Part 2: Sampling First Edition Cereals and Pulses - Determination of Hidden Insect Infestation - Part 3: Reference Method First Edition Cereals and Pulses - Determination of Hidden Insect Infestation - Part 4: Rapid Methods First Edition; Cereals and Milled Cereal Products - Automatic Sampling by Mechanical Means Second Edition Rice - Determination of the Potential Milling Yield from Paddy and from Husked Rice Second Edition Rice ù Determination of amylose content ù Part 1: Reference method First edition [Cancelled: ISO 6647] Rice ù Determination of amylose content ù Part 2: Routine methods First Edition [Replaced: ISO 6647] Animal Feeding Stuffs - Semi-Quantitative Determination of Aflatoxin B1 - Thin-Layer Chromatographic Methods Third Edition

ISO

6654

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

6655 6656 6658 6659 6660 6661 6662 6663 6664 6665 6666 6667 6668 6669 6670 6673

ISO

6676

ISO ISO

6682 6683

ISO ISO

6685 6686

ISO

6689-1

ISO ISO ISO ISO ISO ISO ISO

6689-2 6690 6691 6692 6695 6696 6697

Animal Feeding Stuffs - Determination of Urea Content First Edition Animal Feeding Stuffs - Determination of Soluble Nitrogen Content After Treatment with Pepsin in Dilute Hydrochloric Acid First Edition Animal and Vegetable Fats and Oils - Determination of Polyethylene-Type Polymers Second Edition Sensory analysis - Methodology - General guidance Second Edition Sweet Pepper - Guide to Refrigerated Storage and Transport First Edition Mangoes - Cold Storage Second Edition Fresh Fruit and Vegetables - Arrangement of Parallelepipedic Packages in Land Transport Vehicles First Edition Plums - Guide to Cold Storage First Edition Garlic - Cold Storage Second Edition Bilberries and Blueberries - Guide to Cold Storage First Edition Strawberries - Guide to Cold Storage First Edition Coffee Triers First Edition Green Coffee - Determination of Proportion of Insect-Damaged Beans First Edition Green Coffee - Preparation of Samples for Use in Sensory Analysis Technical Corrigendum 1 06/01/2000 Green and Roasted Coffee - Determination of Free-Flow Bulk Density of Whole Beans (Routine Method) First Edition Instant Coffee - Sampling Method for Bulk Units with Liners Second Edition Green coffee Determination of loss in mass at 105 ░C Second edition Acid-Grade and Ceramic-Grade Fluorspar - Determination of Total Phosphorus Content - Reduced- Molybdophosphate Spectrometric Method Third Edition Earth-Moving Machinery - Zones of Comfort and Reach for Controls (CEN EN ISO 6682: 1995) Second Edition; Amendment 1: 1989 Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests Second Edition Chemical Products for Industrial Use - General Method for Determination of Iron Content - 1,10-Phenanthroline Spectrophotometric Method First Edition Equipment for Crop Protection - Antidrip Devices - Determination of Performance Second Edition Equipment for Harvesting - Combines and Functional Components - Part 1: Vocabulary Materiel De Recolte - MoissonneusesBatteuses Et Leurs Composants Fonctionnels - Partie 1: Vocabulaire First Edition Equipment for Harvesting - Combines and Functional Components - Part 2: Assessment of Characteristics and Performance Defined in Vocabulary First Edition Milking machine installations ù Mechanical tests Third Edition Thermoplastics Polymers for Plain Bearings - Classification and Designation Second Edition Cycles - Marking of Cycle Components First Edition Cycles - Pedal Axle and Crank Assembly with Square End Fitting - Assembly Dimensions First Edition Cycles - Screw Threads Used in Bottom Bracket Assemblies First Edition Cycles - Hubs and Freewheels - Assembly Dimensions First Edition

ISO ISO ISO ISO

6698 6699 6701 6702-1

Cycles - Screw Threads Used to Assemble Freewheels on Bicycle Hubs Second Edition Cycles - Stem and Handlebar Bend - Assembly Dimensions First Edition Cycles - External Dimensions of Spoke Nipples First Edition Aircraft - Requirements for On-Board Weight and Balance Systems - Part 1: General First Edition; Aircraft - Requirements for On-Board Weight and Balance Systems - Part 2: Design, Performance and Interface Characteristics First Edition Water Quality - Determination of Cyanide - Part 1: Determination of Total Cyanide First Edition Water Quality - Determination of Cyanide - Part 2: Determination of Easily Liberatable Cyanide First Edition Water Quality - Determination of Cyanide - Part 3: Determination of Cyanogen Chloride First Edition Automatic Steam Traps - Classification First Edition; (Corrected and Reprinted - 1983) Plastics Laboratory Ware - Graduated Measuring Cylinders First Edition Building and civil engineering Vocabulary Part 1: General terms Third Edition Building and Civil Engineering - Vocabulary - Part 2: Contract Terms First Edition Pipework Components - Definition and Selection of DN (Nominal Size) Second Edition; (CEN EN ISO 6708: 1995) Standard Representation of Latitude, Longitude and Altitude for Geographic Point Locations First Edition Single-Use Containers for Venous Blood Specimen Collection First Edition; (Corrected and Reprinted - 1996) Paints and Varnishes - Preparation of Acid Extracts from Paints in Liquid or Powder Form Second Edition; (AS/NZS 1580.501.2: 1994) Anodized Aluminium and Aluminium Alloys - Measurement of Reflectance Characteristics of Aluminium Surfaces Using IntegratingSphere Instruments First Edition Agricultural Machinery - Equipment for Sowing, Planting, Distributing Fertilizers and Spraying - Recommended Working Widths Second Edition Plastics - Determination of Dynamic Mechanical Properties - Part 1: General Principles Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

6702-2 6703-1 6703-2 6703-3 6704 6706 6707-1 6707-2 6708 6709 6710

ISO

6713

ISO

6719

ISO ISO

6720 6721-1

ISO

6721-2

ISO

6721-3

Plastics - Determination of Dynamic Mechanical Properties - Part 2: Torsion-Pendulum Method First Edition; Corrigendum 1-1995 Plastics - Determination of Dynamic Mechanical Properties - Part 3: Flexural Vibration - Resonance-Curve Method First Edition; Corrigendum 1-1995

ISO

6721-4

Plastics - Determination of Dynamic Mechanical Properties - Part 4: Tensile Vibration - Non-Resonance Method First Edition

ISO

6721-5 AMD 1

Plastics - Determination of Dynamic Mechanical Properties - Part 5: Flexural Vibration - Non-Resonance Method First Edition

ISO ISO ISO

6721-5 6721-6 AMD 1 6721-6

Plastics - Determination of Dynamic Mechanical Properties - Part 5: Flexural Vibration - Non-Resonance Method First Edition Plastics - Determination of Dynamic Mechanical Properties - Part 6: Shear Vibration - Non-Resonance Method First Edition Plastics - Determination of Dynamic Mechanical Properties - Part 6: Shear Vibration - Non-Resonance Method First Edition

ISO

6721-7 AMD 1

Plastics - Determination of Dynamic Mechanical Properties - Part 7: Torsional Vibration - Non-Resonance Method First Edition

ISO

6721-7

ISO

6721-8

ISO

6721-9

ISO ISO ISO ISO ISO ISO

6721-10 6722 6725 6726 6727 6728

ISO ISO ISO

6730 6731 6732

Milk - Enumeration of colonyforming units of psychrotrophic microorganisms - Colony-count technique at 6,5 ░C Second Edition Milk, Cream and Evaporated Milk - Determination of Total Solids Content (Reference Method) First Edition Milk and Milk Products - Determination of Iron Content - Spectrometric Method (Reference Method) First Edition

ISO ISO ISO

6733 6734 6735

ISO

6741-1

ISO

6741-2

ISO

6741-3

Milk and milk products Determination of lead content Graphite furnace atomic absorption spectrometric method First Edition Sweetened Condensed Milk - Determination of Total Solids Content (Reference Method) First Edition Dried Milk - Assessment of Heat Class - Heat-Number Reference Method First Edition Textiles - Fibres and Yarns - Determination of Commercial Mass of Consignments Part 1: Mass Determination and Calculations Second Edition Textiles - Fibres and Yarns - Determination of Commercial Mass of Consignments - Part 2: Methods for Obtaining Laboratory Samples First Edition Textiles - Fibres and Yarns - Determination of Commercial Mass of Consignments - Part 3: Specimen Cleaning Procedures First Edition

ISO

6742-1

ISO

6742-2

Cycles - Lighting and Retro Reflective Devices - Photometric and Physical Requirements - Part 1: Lighting Equipment Second Edition Cycles - Lighting and Retro-Reflective Devices - Photometric and Physical Requirements - Part 2: Retro-Reflective Devices Second Edition

ISO

6743-1

Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 1: Family A (Total Loss Systems) Second Edition

Plastics - Determination of Dynamic Mechanical Properties - Part 7: Torsional Vibration - Non-Resonance Method First Edition Plastics - Determination of Dynamic Mechanical Properties - Part 8: Longitudinal and Shear Vibration - Wave-Propagation Method First Edition Plastics - Determination of Dynamic Mechanical Properties - Part 9: Tensile Vibration - Sonic Pulse Propagation Method First Edition Plastics - Determination of Dynamic Mechanical Properties - Part 10: Complex Shear Viscosity Using a Parallel-Plate Oscillatory Rheometer Second Edition Road Vehicles - 60 V and 600 V Single-Core Cables - Dimensions, Test Methods and Requirements Second Edition Road Vehicles - Dimensions of Two-Wheeled Mopeds and Motorcycles - Terms and Definitions First Edition Mopeds and Motorcycles with Two Wheels - Masses - Vocabulary Second Edition Road Vehicles - Motorcycles - Symbols for Controls, Indicators and Telltales First Edition Photography - Camera Lenses - Determination of ISO Colour Contribution Index (ISO/CCI) First Edition

ISO

6743-2

ISO

6743-3

Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 2: Family F (Spindle Bearings, Bearings and Associated Clutches) First Edition Lubricants, industrial oils and related products (class L) Classification Part 3: Family D (Compressors) First Edition; Replaces ISO 6743-3A and ISO 6743-3B

ISO

6743-4

Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 4: Family H (Hydraulic Systems) Second Edition

ISO ISO ISO

6743-5 6743-6 6743-7

ISO ISO ISO

6743-8 6743-9 6743-10

Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 5: Family T (Turbines) First Edition Second Edition Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 6: Family C (Gears) First Edition Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 7: Family M (Metalworking) First Edition Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 8: Family R (Temporary Protection Against Corrosion) First Edition Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 9: Family X (Greases) Second Edition Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 10: Family Y (Miscellaneous) First Edition

ISO

6743-11

Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 11: Family P (Pneumatic Tools) First Edition

ISO ISO ISO

6743-12 6743-13 6743-14

ISO

6743-15

Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 12: Family Q (Heat Transfer Fluids) First Edition Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 13: Family G (Slideways) Second Edition Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 14: Family U (Heat Treatment) First Edition Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 15: Family E (Internal Combustion Engine Oils) First Edition

ISO ISO ISO ISO ISO ISO

6743-99 6744-1 6744-2 6744-3 6744-4 6745

ISO

6746-1

ISO

6746-2 CORR 1

ISO

6746-2

Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 99: General First Edition; Replaces ISO 6743-0 Binders for Paints and Varnishes - Alkyd Resins - Part 1: General Methods of Test First Edition Binders for Paints and Varnishes - Alkyd Resins - Part 2: Determination of Phthalic Anhydride Content First Edition Binders for Paints and Varnishes - Alkyd Resins - Part 3: Determination of Unsaponifiable Matter Content First Edition Binders for Paints and Varnishes - Alkyd Resins - Part 4: Determination of Fatty Acid Content First Editiion Zinc Phosphate Pigments for Paints - Specifications and Methods of Test First Edition Earth-moving machinery Definitions of dimensions and codes Part 1: Base machine Engins de terrassement DÚfinitions des dimensions et des codes Partie 1: Engin de base Third Edition Earth-moving machinery ù Definitions of dimensions and codes ù Part 2: Equipment and attachments TECHNICAL CORRIGENDUM 1 Engins de terrassement ù DÚfinitions des dimensions et des codes ù Partie 2: ╔quipements et accessoires RECTIFICATIF TECHNIQUE 1 Third Edition Earth-moving machinery ù Definitions of dimensions and codes ù Part 2: Equipment and attachments Engins de terrassement ù DÚfinitions des dimensions et des codes ù Partie 2: ╔quipements et accessoires Third Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

6747 6749 6750 6751 6752 6753-1 6753-2 6754 6755 6756 6757 6758 6759 6761

Earth-moving machinery Tractor-dozers Terminology and commercial specifications Third Edition; Amendment 1: 05/01/2003 Earth-Moving Machinery - Preservation and Storage Second Edition Earth-moving machinery - Operator┤s manual - Content and format Third Edition Tools for Moulding - Ejector Pins with Cylindrical Head Third Edition Round Punches with 60 Degrees Conical Head and Straight Shank First Edition Tools for Pressing and Moulding - Machined Plates - Part 1: Machined Plates for Press Tools Second Edition Tools for Pressing and Moulding - Machined Plates - Part 2: Machined Plates for Moulds First Edition Dried Thyme (Thymus Vulgaris L.) - Specification Second Edition Dried Sour Cherries - Specification Second Edition Decorticated Stone Pine Nuts - Specification First Edition Decorticated Kernels of Mahaleb Cherries - Specification First Edition Welded Steel Tubes for Heat Exchangers First Edition Seamless Steel Tubes for Heat Exchangers First Edition Steel Tubes - Preparation of Ends of Tubes and Fittings for Welding First Edition

ISO ISO ISO

6764 6765 6766

ISO

6767

ISO ISO ISO ISO ISO ISO ISO ISO

6768 6770 6771 6772 6773 6777 6778 6779

ISO ISO ISO

6780 6781 6782

Ambient Air - Determination of the Mass Concentration of Nitrogen Dioxide - Modified Griess-Saltzman Method Second Edition Instant Tea - Determination of Free-Flow and Compacted Bulk Densities First Edition Aerospace ù Fluid systems and components ù Pressure and temperature classifications Third Edition Aerospace - Fluid Systems - Impulse Testing of Hydraulic Hose, Tubing and Fitting Assemblies Second Edition Aerospace Fluid Systems - Thermal Shock Testing of Piping and Fittings Second Edition Water Quality - Determination of Nitrite - Molecular Absorption Spectrometric Method First Edition; (CEN EN 26777: 1993) Water Quality - Determination of Ammonium - Potentiometric Method First Edition Acceptance Conditions for Broaching Machines of Vertical Internal Type - Testing of Accuracy First Edition Flat pallets for intercontinental materials handling Principal dimensions and tolerances Second Edition; Corrected and Reprinted 04/15/04 Thermal Insulation - Qualitative Detection of Thermal Irregularities in Building Envelopes - Infrared Method First Edition Aggregates for Concrete - Determination of Bulk Density First Edition

ISO

6783

Coarse Aggregates for Concrete - Determination of Particle Density and Water Absorption - Hydrostatic Balance Method First Edition

Shipbuilding - Shipborne Barges, Series 1 - Lifting Post Casting - Arrangement, Dimensions and Method of Testing First Edition Shipbuilding - Shipborne Barges, Series 3 - Main Dimensions First Edition Shipbuilding - Shipborne Barges, Series 4 - Main Dimensions First Edition Ambient Air - Determination of the Mass Concentration of Sulfur Dioxide - Tetrachloromercurate (TCM)/Pararosaniline Method First Edition

ISO ISO ISO ISO ISO

6784 6785 6786 6787 6788

ISO

6789

ISO

6790

ISO ISO ISO

6791 6796 6797

ISO

6798

ISO ISO ISO ISO ISO

6800 6801 6802 6803 6804

ISO ISO ISO

6805 6806 6807

Concrete - Determination of Static Modulus of Elasticity in Compression First Edition Milk and Milk Products - Detection of Salmonella spp. Second Edition; IDF 93 Road Vehicles - Air Braking Systems - Identification of Connections on Units First Edition Assembly Tools for Screws and Nuts - Adjustable Wrenches Second Edition Assembly Tools for Screws and Nuts - Four-Way Socket Wrenches - Dimensions and Torque Test Second Edition Assembly Tools for Screws and Nuts - Hand Torque Tools - Requirements and Test Methods for Design Conformance Testing, Quality Conformance Testing and Recalibration Procedure Third Edition Equipment for Fire Protection and Fire Fighting - Graphical Symbols for Fire Protection Plans - Specification First Edition; (PNS 6790: 1992) Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Content of Quinoline-Insoluble Material First Edition Polyglycols for Industrial Use - Determination of Hydroxyl Number - Phthalic Anhydride Esterification Method First Edition Road Vehicles - Motor Vehicles - Production Conformity Requirements for Flasher Units First Edition Reciprocating Internal Combustion Engines - Measurement of Emitted Airborne Noise - Engineering Method and Survey Method First Edition Animal and Vegetable Fats and Oils - Determination of the Composition of Fatty Acids in the 2-Position of the Triglyceride Molecules Second Edition Rubber or Plastics Hoses - Determination of Volumetric Expansion First Edition; (CEN EN 26801: 1993) Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing Third Edition Rubber or Plastics Hoses and Hose Assemblies - Hydraulic-Pressure Impulse Test without Flexing Second Edition Rubber Hoses and Hose Assemblies for Washing-Machines and Dishwashers - Specification for Inlet Hoses Second Edition Rubber Hoses and Hose Assemblies for Underground Mining - Wire-Reinforced Hydraulic Types for Coal Mining - Specification Second Edition Rubber Hoses and Hose Assemblies for Use in Oil Burners - Specification Second Edition; (CEN EN ISO 6806: 1995) Rubber hoses and hose assemblies for rotary drilling and vibration applications Specification Second Edition

ISO

6808

Plastics Hoses and Hose Assemblies for Suction and Low-Pressure Discharge of Petroleum Liquids - Specification Second Edition

ISO ISO

6810 6811

Rubber Compounding Ingredients - Carbon Black - Determination of Surface Area - CTAB Adsorption Methods Second Edition Spherical Plain Bearings - Vocabulary Rotules Lisses - Vocabulaire Second Edition; Technical Corrigendum 1:07/15/1999

ISO

6812

ISO ISO

6813 6814

Roll on/Roll off Ship-to-Shore Connection - Interface Between Terminals and Ships with Straight Stern/Bow Ramps First Edition Road Vehicles - Collision Classification - Terminology Vehicules Routiers - Classification Des Collisions - Terminologie Second Edition Machinery for Forestry - Mobile and Self-Propelled Machinery - Terms, Definitions and Classification Second Edition

ISO ISO ISO ISO

6817 6820 6822 6826

ISO ISO ISO

6827 6830 6835

ISO ISO ISO

6836 6837 6839

ISO

6840

ISO

6841

ISO

6842

ISO ISO

6843 6844

ISO

6845

ISO ISO ISO ISO ISO ISO

6846 6847 6848 6849 6851 6853

ISO

6855

ISO ISO

6856 6858

Measurement of Conductive Liquid Flow in Closed Conduits - Method Using Electromagnetic Flowmeters First Edition CEN EN ISO 6817: 1995 Wheat Flour and Rye Flour - General Guidance on the Drafting of Bread-Making Tests First Edition Potatoes, Root Vegetables and Round-Headed Cabbages - Guide to Storage in Silos Using Forced Ventilation First Edition Reciprocating Internal Combustion Engines - Fire Protection Second Edition Aluminium and Aluminium Alloys - Determination of Titanium Content - Diantipyrylmethane Photometric Method First Edition Iron Ores - Determination of Aluminium Content - EDTA Titrimetric Method First Edition Surface Active Agents - Washing Powders - Determination of Total Boron Content - Titrimetric Method First Edition Surface Active Agents - Mercerizing Agents - Evaluation of the Activity of Wetting Products for Mercerization by Determination of the Shrinkage Rate of Cotton First Edition Surface Active Agents - Water Dispersing Power in Dry Cleaning Solvents First Edition Anionic Surface Active Agents - Determination of Solubility in Water First Edition Cationic Surface Active Agents (Hydrochlorides and Hydrobromides) - Determination of Critical Micellization Concentration - Method by Measurement of Counter Ion Activity First Edition Surface Active Agents - Technical Straight-Chain Sodium Alkylbenzenesulfonates - Determination of Mean Relative Molecular Mass by Gas-Liquid Chromatography Second Edition Surface Active Agents - Sulfated Ethoxylated Alcohols and Alkylphenols - Determination of Total Active Matter Content Second Edition Surface Active Agents - Sulfated Ethoxylated Alcohols and Alkyphenols - Estimation of the Mean Relative Molecular Mass First Edition Surface Active Agents - Determination of Mineral Sulfate Content - Titrimetric Method First Edition Surface Active Agents - Technical Alkane Sulfonates - Determination of the Mean Relative Molecular Mass of the Alkane Monosulfonates and the Alkane Monosulfonate Content Second Edition Photography - Black-and-White Continuous-Tone Papers - Determination of ISO Speed and ISO Range for Printing Second Edition Welding Consumables - Deposition of a Weld Metal Pad for Chemical Analysis Second Edition Arc welding and cutting Nonconsumable tungsten electrodes Classification Second Edition Photography - Processing Wastes - Determination of Boron First Edition Photography - Processing Waste - Determination of Total Amino Nitrogen (Microdiffusion Kjeldahl Method) Second Edition Photography - Processing Waste - Determination of Ammoniacal Nitrogen (Microdiffusion Method) Second Edition Road Vehicles - Measurement Methods for Gaseous Pollutants Emitted by Mopeds Equipped with a Controlled Ignition Engine Second Edition Road Vehicles - Unscreened High-Tension Ignition Cable Assemblies - General Requirements and Test Methods Second Edition Third Edition Aircraft - Ground Support Electrical Supplies - General Requirements First Edition; Replaces ISO 223: 1975

ISO ISO

6859-1 6860

Aircraft - Proximity Switches - Part 1: General Requirements First Edition Paints and varnishes Bend test (conical mandrel) Second Edition

ISO ISO ISO ISO

6861 6862 6865 6866

Information and Documentation - Glagolitic Alphabet Coded Character Set for Bibliographic Information Interchange First Edition Information and Documentation - Mathematical Coded Character Set for Bibliographic Information Interchange First Edition Animal Feeding Stuffs - Determination of Crude Fibre Content - Method with Intermediate Filtration First Edition Animal Feeding Stuffs - Determination of Free and Total Gossypol First Edition

ISO

6867

ISO ISO ISO ISO ISO ISO ISO ISO ISO

6869 6870 6872 6873 6874 6875 6876 6877 6878

Animal Feeding Stuffs - Determination of Vitamin E Content - Method Using High-Performance Liquid Chromatography First Edition Animal Feeding Stuffs - Determination of the Contents of Calcium, Copper, Iron, Magnesium, Manganese, Potassium, Sodium and Zinc - Method Using Atomic Absorption Spectrometry First Edition Animal Feeding Stuffs - Qualitative Determination of Zearalenone Dental Ceramic Second Edition; Amendment 1-1997,Corrected and Reprinted 06/15/1998 Dental Gypsum Products Second Edition Dentistry Polymer-based pit and fissure sealants Second Edition Dental Patient Chair Second Edition Dental Root Canal Sealing Materials Second Edition Dental Root-Canal Obturating Points Second Edition Water quality Determination of phosphorus Ammonium molybdate spectrometric method Second Edition

ISO ISO ISO ISO ISO ISO

6880 6882 6883 6884 6885 6886

Machinery for Agriculture - Trailed Units of Shallow Tillage Equipment - Main Dimensions and Attachment Points First Edition Asparagus - Guide to Refrigerated Transport First Edition Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) Fourth Edition Animal and Vegetable Fats and Oils - Determination of Ash First Edition Animal and vegetable fats and oils Determination of anisidine value Third Edition Animal and vegetable fats and oils Determination of oxidative stability (accelerated oxidation test) Second Edition

ISO

6887-1

ISO

6887-2

ISO

6887-3

ISO

6887-4 CORR 1

Microbiology of Food and Animal Feeding Stuffs - Preparation of Test Samples, Initial Suspension and Decimal Dilutions for Microbiological Examination - Part 1: General Rules for the Preparation of the Initial Suspension and Decimal Dilutions First Edition Microbiology of food and animal feeding stuffs preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 2: Specific rules for the preparation of meat and meat products First Edition Microbiology of food and animal feeding stuffs Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 3: Specific rules for the preparation of fish and fishery products First Edition Microbiology of food and animal feeding stuffs ù Preparation of test samples, initial suspension and decimal dilutions for microbiological examination ù Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products TECHNICAL CORRIGENDUM 1 First Edition

ISO

6887-4

ISO

6888-1

ISO

6888-2

ISO ISO

6888-3 6889

ISO ISO ISO

6891 6892 6896

ISO ISO ISO ISO

6897 6898 6899 6906

ISO ISO

6914 6915

ISO

6916-1 AMD 1

ISO

6916-1 CORR 1

ISO

6916-1

ISO ISO ISO ISO

6916-2 6922 6924 6925

Microbiology of food and animal feeding stuffs ù Preparation of test samples, initial suspension and decimal dilutions for microbiological examination ù Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products First Edition Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Coagulase-Positive Staphylococci (Staphylococcus Aureus and Other Species) - Part 1: Technique Using Baird-Parker Agar Medium First Edition; Amendment 1, 7/1/03 Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Coagulase-Positive Staphylococci (Staphylococcus Aureus and Other Species) - Part 2: Technique Using Rabbit Plasma Fibrinogen Agar Medium First Edition; Amendment 1, 07/01/03 Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Coagulase-Positive Staphylococci (Staphylococcus Aureus and Other Species) - Part 3: Detection and MPN Technique for Low Numbers First Edition; Corrected version: 01/15/2004 Surface Active Agents - Determination of Interfacial Tension by Drawing up Liquid Films Second Edition Timber Structures - Joints Made with Mechanical Fasteners - General Principles for the Determination of Strength and Deformation Characteristics First Edition Metallic Materials - Tensile Testing at Ambient Temperature Second Edition Cinematography - Intermittent Sprockets for 35 mm Motion-Picture Projectors - Dimensions First Edition Guidelines for the Evaluation of the Response of Occupants of Fixed Structures, Especially Buildings and Off-Shore Structures, to Low-Frequency Horizontal Motion (0,063 to 1 Hz) First Edition Open Front Mechanical Power Presses - Capacity Ratings and Dimensions First Edition Acceptance Conditions of Open Front Mechanical Power Presses - Testing of the Accuracy First Edition Vernier Callipers Reading to 0,02 mm First Edition Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation Second Edition Flexible Cellular Polymeric Materials - Polyurethane Foam for Laminate Use - Specification Second Edition Flexible cellular polymeric materials ù Sponge and expanded cellular rubber products ù Specification Part 1: Sheeting AMENDMENT 1 First Edition Flexible cellular polymeric materials ù Sponge and expanded cellular rubber products ù Specification ù Part 1: Sheeting TECHNICAL CORRIGENDUM 1 First Edition Flexible cellular polymeric materials ù Sponge and expanded cellular rubber products ù Specification ù Part 1: Sheeting First Edition Flexible Cellular Polymeric Materials - Sponge and Expanded Cellular Rubber Products - Specification - Part 2: Mouldings and Extrusions First Edition Adhesives - Determination of Tensile Strength of Butt Joints First Edition; (CEN EN 26922: 1993) Correspondence Envelopes - Vocabulary First Edition Textile Floor Coverings - Burning Behaviour - Tablet Test at Ambient Temperature First Edition

ISO ISO ISO

6926 6927 6929

ISO

6930-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

6930-2 6931-1 6931-2 6932 6933 6934-1 6934-2 6934-3 6934-4 6934-5 6935-1 6935-2 6935-3

ISO ISO ISO ISO ISO ISO

6936 6937 6938 6939 6940 6941

ISO ISO ISO ISO

6942 6943 6944 6945

ISO

6946

ISO

6947

Acoustics - Requirements for the Performance and Calibration of Reference Sound Sources Used for the Determination of Sound Power Levels Second Edition; Corrected and Reprinted 12/01/2000 Building Construction - Jointing Products - Sealants - Vocabulary First Edition Steel Products - Definitions and Classification First Edition High Yield Strength Steel Plates and Wide Flats for Cold Forming - Part 1: Delivery Conditions for Thermomechanically-Rolled Steels First Edition; Together with ISO 6930-2, Cancels and Replaces ISO 6930: 1983 High Yield Strength Steel Plates and Wide Flats for Cold Forming - Part 2: Delivery Condition for Normalized, Normalized Rolled and as-rolled Steels First Edition Stainless Steels for Springs - Part 1: Wire Second Edition Stainless steels for springs Part 2: Narrow strip Second Edition Cold-Reduced Carbon Steel Strip with a Maximum Carbon Content of 0,25% Second Edition Railway Rolling Stock Material - Magnetic Particle Acceptance Testing First Edition Steel for the Prestressing of Concrete - Part 1: General Requirements First Edition Steel for the Prestressing of Concrete - Part 2: Cold-Drawn Wire First Edition Steel for the Prestressing of Concrete - Part 3: Quenched and Tempered Wire First Edition Steel for the Prestressing of Concrete - Part 4: Strand First Edition; Corrigendum 1: 1992; Corrigendum 2: 2000 Steel for the Prestressing of Concrete - Part 5: Hot-Rolled Steel Bars with or without Subsequent Processing First Edition Steel for the reinforcement of concrete ù Part 1: Plain bars Second Edition Steel for the reinforcement of concrete ù Part 2: Ribbed bars Second Edition Steel for the Reinforcement of Concrete - Part 3: Welded Fabric First Edition Corrigendum 1: 2000 Information Processing - Conversion Between the Two Coded Character Sets of ISO 646 and ISO 6937-2 and the CCITT International Telegraph Alphabet No. 2 (ITA 2) Second Edition Information Technology - Coded Graphic Character Set for Text Communication - Latin Alphabet Third Edition Textiles - Natural Fibres - Generic Names and Definitions First Edition Textiles - Yarns from Packages - Method of Test for Breaking Strength of Yarn by the Skein Method Second Edition Textile fabrics Burning behaviour Determination of ease of ignition of vertically oriented specimens Second Edition Textile fabrics Burning behaviour Measurement of flame spread properties of vertically oriented specimens Second Edition Protective Clothing - Protection Against Heat and Fire - Method of Test: Evaluation of Materials and Material Assemblies When Exposed to a Source of Radiant Heat Third Edition Rubber, Vulcanized - Determination of Tension Fatigue Second Edition Fire Resistance Tests - Ventilation Ducts First Edition Rubber Hoses - Determination of Abrasion Resistance of the Outer Cover Second Edition; Amendment 1: 12/15/1998 Building Components and Building Elements - Thermal Resistance and Thermal Transmittance - Calculation Method First Edition; Supersedes 6946-1 and 6946-2; CEN EN ISO 6946: 1996; Amendment 1: 05/15/2003 Welds - Working Positions - Definitions of Angles of Slope and Rotation (Revision of ISO 6947:1980) Second Edition; (Corrected and Reprinted - 1993)

ISO ISO ISO

6948 6949 6951

ISO

6952

ISO

6953-1

ISO

6953-2

ISO

6954

ISO ISO

6955 6957

ISO

6962

ISO ISO

6964 6965

ISO

6966-1

ISO ISO ISO ISO ISO ISO ISO ISO

6966-2 6967 6968 6969 6970 6971 6972 6973

ISO

6974-1

ISO

6974-2

Automatic Steam Traps - Production and Performance Characteristic Tests First Edition Fruits and Vegetables - Principles and Techniques of the Controlled Atmosphere Method of Storage First Edition Information Processing - Processor System Bus Interface (Eurobus A) First Edition Fluid Power Systems and Components - Two-Pin Electrical Plug Connectors with Earth Contact - Characteristics and Requirements Second Edition Pneumatic Fluid Power - Compressed Air Pressure Regulators and Filter-Regulators - Part 1: Main Characteristics to Be Included in Literature from Suppliers and Product-Marking Requirements Second Edition; Corrigendum: 4/1/2006 Pneumatic Fluid Power - Compressed Air Pressure Regulators and Filter-Regulators - Part 2: Test Methods to Determine the Main Characteristics to be Included in Literature from Suppliers First Edition Mechanical Vibration - Guidelines for the Measurement, Reporting and Evaluation of Vibration with Regard to Habitability on Passenger and Merchant Ships Second Edition Analytical Spectroscopic Methods - Flame Emission, Atomic Absorption, and Atomic Fluorescence - Vocabulary First Edition Copper Alloys - Ammonia Test for Stress Corrosion Resistance First Edition Nuclear energy Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste Second Edition Polyolefin Pipes and Fittings - Determination of Carbon Black Content by Calcination and Pyrolysis - Test Method and Basic Specification First Edition Aircraft - Self-Propelled Gantry for Lifting Air Cargo Containers and Outside Cargoes - Functional Requirements First Edition Aircraft Ground Equipment - Basic Requirements - Part 1: General Design Requirements First Edition; Together with ISO 6966-2, Cancels and Replaces ISO 6966:1993 Aircraft Ground Equipment - Basic Requirements - Part 2: Safety Requirements First Edition; Together with ISO 6966-1, Cancels and Replaces ISO 6966:1993 Aircraft ground equipment Main deck loader Functional requirements Third Edition Aircraft ground equipment Lower deck loader Functional requirements Third Edition Road Vehicles - Sound Signalling Devices - Tests After Mounting on Vehicle Third Edition Motorcycles and Mopeds - Pollution Tests - Chassis Dynamometer Bench First Edition Cranked-Link Drag Chains of Welded Construction, Attachments and Sprockets Second Edition Cranked-Link Mill Chains of Welded Construction, Attachments and Sprockets Second Edition Drop-Forged Rivetless Chains for Conveyors First Edition Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 1: Guidelines for Tailored Analysis First Edition; Replaces ISO 6974: 1984 Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 2: Measuring-System Characteristics and Statistics for Processing of Data First Edition; Replaces ISO 6974: 1984

ISO

6974-3

ISO

6974-4

ISO

6974-5

ISO

6974-6 CORR 1

ISO ISO

6974-6 6975

ISO

6976

ISO

6978-1

ISO

6978-2 CORR 2

ISO

6978-2 CORR 1

ISO

6978-2

ISO

6980-1

ISO

6980-2

ISO

6980-3

ISO ISO ISO

6983-1 6984 6986

Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 3: Determination of Hydrogen, Helium, Oxygen, Nitrogen, Carbon Dioxide and Hydrocarbons up to C8 Using Two Packed Columns First Edition; Replaces ISO 6974: 1984 Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 4: Determination of Nitrogen, Carbon Dioxide and C1 to C5 and C6+ Hyrdocarbons for a Laboratory and On-Line Measuring System Using Two Columns First Edition; Replaces ISO 6974: 1984 Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 5: Determination of Nitrogen, Carbon Dioxide and C1 to C5 and C6+ Hyrdocarbons for a Laboratory and On-Line Process Application Using Three Columns First Edition; Replaces ISO 6974: 1984 Natural gas ù Determination of composition with defined uncertainty by gas chromatography ù Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns First Edition Natural gas ù Determination of composition with defined uncertainty by gas chromatography ù Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns First Edition Natural Gas - Extended Analysis - Gas-Chromatographic Method Second Edition Natural Gas - Calculation of Calorific Values, Density, and Relative Density and Wobbe Index from Composition Second Edition; Corrected and Reprinted 02/01/1996; Corrigendum 2: 12/15/1997; Corrigendum 3: 08/01/1999 Natural Gas - Determination of Mercury - Part 1: Sampling of mercury by chemisorption on iodine First Edition; This Standard Together with ISO 6978-2 Replaces ISO 6978 Natural gas ù Determination of mercury ù Part 2: Sampling of mercury by amalgamation on gold/platinum alloy TECHNICAL CORRIGENDUM 2 First Edition Natural gas ù Determination of mercury ù Part 2: Sampling of mercury by amalgamation on gold/platinum alloy TECHNICAL CORRIGENDUM 1 First Edition Natural gas ù Determination of mercury ù Part 2: Sampling of mercury by amalgamation on gold/platinum alloy First Edition; This Standard Together with ISO 6978-1 Replaces ISO 6978 Nuclear energy Reference beta-particle radiation Part 1: Methods of production First Edition; Together with ISO 6980-2:2004 and ISO 6980-3:2006 Supersedes ISO 6980:1996 Nuclear energy Reference beta-particle radiation Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field First Edition; Together with ISO 6980-1:2006 and ISO 6980-3:2006 Supersedes ISO 6980:1996 Nuclear energy Reference beta-particle radiation Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence First Edition; Together with ISO 6980-1:2006 and ISO 69802:2004 Supersedes ISO 6980:1996 Numerical Control of Machines - Program Format and Definition of Address Words - Part 1: Data Format for Positioning, Line Motion and Contouring Control Systems First Edition Round Non-Alloy Steel Wires for Stranded Wire Ropes for Mine Hoisting - Specifications Second Edition Side and Face Milling (Slotting) Cutters with Indexable Inserts - Dimensions First Edition; (ANSI 6986-1983)

ISO

6987

ISO

6988

ISO

6989

ISO

6993-1

ISO

6993-2

ISO

6993-3

ISO ISO ISO

6993-4 6994 6995

ISO

6997

ISO

6998

ISO

6999

ISO ISO ISO

7000 7001 7002

ISO ISO ISO ISO ISO ISO

7004 7005-1 7005-2 7005-3 7006 7007

Indexable Hard Material Inserts with Rounded Corners, with Partly Cylindrical Fixing Hole - Dimensions First Edition; Cancels and Replaces ISO 6987-1: 1983, ISO 6987-2:1990 and ISO/TR 6987-3: 1990 Metallic and Other Non-Organic Coatings - Sulfur Dioxide Test with General Condensation of Moisture First Edition; (CEN EN ISO 6988: 1994) Textile Fibres - Determination of Length and Length Distribution of Staple Fibres (by Measurement of Single Fibres) Firts Edition; Replaces ISO 270: 1975 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) First Edition; Together with ISO 6993-2 thru ISO 6993-4 replaces ISO 6993: 2001 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa) First Edition; Together with ISO 6993-1, ISO 6993-3 and ISO 6993-4: 2006 replaces ISO 6993: 2001 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa) First Edition; Together with ISO 6993-1, ISO 6993-2 and ISO 6993-4: 2006 replaces ISO 6993: 2001 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 4: Code of practice for design, handling and installation First Edition; Together with ISO 6993-1 thru ISO 6993-3: 2006 replaces ISO 6993: 2001 Aluminium Ores - Determination of Aluminium Content - EDTA Titrimetric Method First Edition Aluminium Ores - Determination of Titanium Content - 4,4┤-Diantipyrylmethane Spectrophotometric Method First Edition Carbonaceous Materials for the Production of Aluminium - Calcined Coke - Determination of Apparent Oil Content - Heating Method First Edition Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Coking Value Second Edition; Technical Corrigendum 1: 03-01-1999 Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Density - Pyknometric Method First Edition Graphical symbols for use on equipment Index and synopsis Symboles graphiques utilisables sur le matÚriel Index et tableau synoptique Third Edition Public Information Symbols Second Edition;Amendment 1-1993; PNS 1082: 1992 Agricultural Food Products - Layout for a Standard Method of Sampling from a Lot First Edition Photography - Industrial Radiographic Film - Determination of ISO Speed, ISO Average Gradient and ISO G2 and G4 When Exposed to X- and Gamma-Radiation Second Edition Metallic Flanges - Part 1: Steel Flanges First Edition; (AS/NZS 4331.1: 1995) Metallic Flanges - Part 2: Cast Iron Flanges First Edition; (AS/NZS 4331.2: 1995) Metallic Flanges - Part 3: Copper Alloy and Composite Flanges First Edition; (AS/NZS 4331.3: 1995) Woodworking Machines - Diameters of Spindles for Receiving Circular Sawblades First Edition Woodworking Machines - Table Bandsawing Machines - Nomenclature and Acceptance Conditions First Edition

Woodworking Machines - Single Blade Circular Saw Benches with or without Travelling Table - Nomenclature and Acceptance Conditions First Edition Woodworking Machines - Single Spindle Moulding Machines - Nomenclature and Acceptance Conditions First Edition Graphical symbols ù Safety colours and safety signs ù Safety signs used in workplaces and public areas AMENDMENT 2 First Edition Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas First Edition Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas First Edition Packaging - Sacks - Method of Sampling Empty Sacks for Testing First Edition; (CEN EN 27023: 1992) Diesel Engines - Screw-In Injection Nozzle Holders, Types 20, 21, 21.1 and 27 for Pintle Nozzle SizeS" Water Quality - Determination of Turbidity Third Edition Acoustics - Statistical Distribution of Hearing Thresholds as a Function of Age Second Edition Road Vehicles - Screw-Mounted Injection Nozzle Holders, Types 12, 13, 14, 15, 16, 17, 18 and 19 Second Edition Fine and Coarse Aggregates for Concrete - Determination of the Particle Mass-per-Volume and Water Absorption - Pyknometer Method First Edition Prevailing Torque Type Hexagon Nuts (with Non-Metallic Insert), Style 1 - Property Classes 5, 8 and 10 Second Edition Prevailing Torque Type Hexagon Nuts (with Non-Metallic Insert), Style 2 - Property Classes 9 and 12 Third Edition Prevailing Torque Type All-Metal Hexagon Nuts, Style 2 - Property Classes 5, 8, 10 and 12 Second Edition Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallic Insert) - Product Grades A and B Second Edition Prevailing Torque Type All-Metal Hexagon Nuts with Flange - Product Grades A and B Second Edition Pan Head Screws with Type H or Type Z Cross Recess - Product Grade A Second Edition Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel of Property Class 4.8 First Edition Cross Recessed Countersunk Flat Head Screws (Common Head Style) - Grade A - Part 2: Steel of Property Class 8.8, Stainless Steel and Non-Ferrous Metals First Edition; (CEN EN ISO 7046-2: 1994)

ISO ISO

7008 7009

ISO ISO ISO ISO ISO ISO ISO ISO

7010 AMD 2 7010 AMD 1 7010 7023 7026 7027 7029 7030

ISO ISO ISO ISO ISO ISO ISO

7033 7040 7041 7042 7043 7044 7045

ISO

7046-1

ISO

7046-2

ISO ISO ISO

7047 7048 7049

ISO

7050

Countersunk Raised Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A Second Edition Cross Recessed Cheese Head Screws First Edition; Corrected and Reprinted 02/01/1999 Cross Recessed Pan Head Tapping Screws First Edition Cross Recessed Countersunk (Flat) Head Tapping Screws (Common Head Style) First Edition; (CEN EN ISO 7050: 1994) (AS/NZS 4407: 1996)

ISO ISO ISO ISO ISO

7051 7053 7056 7057 7059

Cross Recessed Raised Countersunk (Oval) Head Tapping Screws First Edition; (CEN EN ISO 7051: 1994) (AS/NZS 4408: 1996) Hexagon Washer Head Tapping Screws First Edition; (AS/NZS 4409: 1996) Plastics Laboratory Ware - Beakers First Edition Plastics Laboratory Ware - Filter Funnels First Edition Caprolactam for Industrial Use - Determination of Absorbance at a Wavelength of 290 nm First Edition

ISO

7061

Shipbuilding - Aluminium Shore Gangways for Seagoing Vessels Second Edition

ISO ISO

7063 7064

ISO

7065-1

ISO

7065-2

ISO

7066-2

Rolling bearings Needle roller bearing track rollers Boundary dimensions and tolerances Second Edition; Replaces ISO 6278 Information Technology - Security Techniques - Check Character Systems First Edition Information Processing - Data Interchange on 200 mm (8 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on Both Sides - Part 1: Dimensional, Physical and Magnetic Characteristics Second Edition; CAN/CGSB-186.3-93 Information Processing - Data Interchange on 200 mm (8 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on Both Sides - Part 2: Track Format First Edition Assessment of Uncertainty in the Calibration and Use of Flow Measurement Devices - Part 2: Non-Linear Calibration Relationships First Edition

ISO

7072

Tractors and Machinery for Agriculture and Forestry - Linch Pins and Spring Pins - Dimensions and Requirements Second Edition

ISO

7077

Measuring Methods for Building - General Principles and Procedures for the Verification of Dimensional Compliance First Edition

ISO ISO ISO ISO ISO ISO

7078 7079 7083 7085 7086-1 7086-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

7087 7088 7089 7090 7091 7092 7093-1 7093-2 7094 7096

Building Construction - Procedures for Setting out, Measurement and Surveying - Vocabulary and Guidance Notes First Edition Core Drills with Parallel Shanks and with Morse Taper Shanks First Edition Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and Dimensions First Edition Mechanical and Performance Requirements of Case Hardened and Tempered Metric Thread Rolling Screws First Edition Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 1: Test Method Second Edition Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible Limits Second Edition Ferroalloys - Experimental Methods for the Evaluation of the Quality Variation and Methods for Checking the Precision of Sampling First Edition Fish-Meal - Vocabulary First Edition Plain Washers - Normal Series - Product Grade A Second Edition Plain Washers, Chamfered - Normal Series - Product Grade A Second Edition Plain Washers - Normal Series - Product Grade C Second Edition Plain Washers - Small Series - Product Grade A Second Edition Plain Washers - Large Series - Part 1: Product Grade A First Edition; Corrected and Reprinted 02/01/2001 Plain Washers - Large Series - Part 2: Product Grade C First Edition Plain Washers - Extra Large Series - Product Grade C Second Edition; Technical Corrigendum 1 12/01/2000 Earth-Moving Machinery - Laboratory Evaluation of Operator Seat Vibration Third Edition

ISO

7097-1

Nuclear fuel technology Determination of uranium in solutions, uranium hexafluoride and solids Part 1: Iron(II) reduction/potassium dichromate oxidation titrimetric method First Edition; Together with ISO 7097-2:2004 replaces ISO 7097:1983 and ISO 9989:1996

ISO ISO

7097-2 7098

ISO ISO

7103 7105

ISO ISO

7106 7108

ISO

7109

ISO ISO ISO ISO ISO

7112 7113 7114 7116 7117

ISO

7119

ISO ISO

7120 7121

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

7129 7130 7131 7132 7133 7134 7135 7136 7137 7138 7139 7140

Nuclear fuel technology Determination of uranium in solutions, uranium hexafluoride and solids Part 2: Iron(II) reduction/cerium(IV) oxidation titrimetric method First Edition; Together with ISO 7097-1:2004 Replaces ISO 7097:1993 and ISO 9989:1996 Information and Documentation - Romanization of Chinese Second Edition Liquefied Anhydrous Ammonia for Industrial Use - Sampling - Taking a Laboratory Sample First Edition; (Corrected and Reprinted 1983) Liquefied Anhydrous Ammonia for Industrial Use - Determination of Water Content - Karl Fischer Method First Edition Liquefied Anhydrous Ammonia for Industrial Use - Determination of Oil Content - Gravimetric and Infra-Red Spectrometric Methods First Edition Ammonia Solution for Industrial Use - Determination of Ammonia Content - Titrimetric Method First Edition Ammonia Solution for Industrial Use - Determination of Residue After Evaporation at 105 Degrees Celsius - Gravimetric Method First Edition Machinery for Forestry - Portable Hand-Held Brush-Cutters and Grass-Trimmers - Vocabulary Materiel Forestier - Debroussailleuses Et Coupe-Herbe Portatifs - Vocabulaire Second Edition Portable Hand-Held Forestry Machines - Cutting Attachments for Brush Cutters - Single-Piece Metal Blades Third Edition Household Sewing Machines - Numerical Classification First Edition Mopeds - Measurement of Maximum Speed Second Edition Motorcycles - Measurement of Maximum Speed Second Edition Continuous Mechanical Handling Equipment for Loose Bulk Materials - Screw Conveyors - Design Rules for Drive Power First Edition Petroleum Products and Lubricants - Petroleum Oils and Other Fluids - Determination of Rust-Preventing Characteristics in the Presence of Water First Edition Steel ball valves for general-purpose industrial applications Second Edition Earth-Moving Machinery - Cutting Edges Used on Tractor-Dozers, Graders and Scapers - Principal Shapes and Basic Dimensions Third Edition Earth-Moving Machinery - Guide to Procedure for Operator Training First Edition Earth-moving machinery - Loaders - Terminology and commercial specifications Second Edition; Amendment 1: 05/01/2003 Earth-moving machinery Dumpers Terminology and commercial specifications Third Edition Earth-Moving Machinery - Tractor-Scrapers - Terminology and Commercial Specifications Second Edition Earth-Moving Machinery - Graders - Terminology and Commercial Specifications Second Edition; Corrigendum 1: 1996 Earth-Moving Machinery - Hydraulic Excavators - Terminology and Commercial Specifications First Edition Earth-moving machinery Pipelayers Terminology and commercial specifications Third Edition Aircraft - Environmental Conditions and Test Procedures for Airborne Equipment Fourth Edition Cross-Country Skis - Determination of Mass and Location of Balance Point First Edition Cross-Country Skis - Determination of Elastic Properties First Edition Cross-Country Skis - Determination of Dynamic Performance - Laboratory Measurement Method First Edition

ISO ISO ISO ISO ISO

7141 7142 7143 7144 7146

ISO

7148-1

ISO ISO ISO ISO

7148-2 7149 7150-1 7151

ISO ISO ISO ISO ISO

7152 7153-1 7154 7156 7162

ISO ISO ISO ISO

7165 7166 7168-1 7168-2

ISO ISO ISO ISO ISO ISO

7169 7170 7171 7172 7173 7174-1

ISO ISO ISO ISO ISO

7174-2 7175-1 7175-2 7176-1 7176-2

Passenger vehicles - Light alloy wheels - Impact test Third Edition Binders for paints and varnishes ù Epoxy resins ù General methods of test Second edition Binders for paints and varnishes ù Methods of test for characterizing waterbased binders Third edition Documentation - Presentation of Theses and Similar Documents First Edition Plain Bearings - Terms, Characteristics and Causes of Damage and Changes in Appearance First Edition Plain Bearings - Testing of the Tribological Behaviour of Bearing Materials - Part 1: Testing of Bearing Metals Second Edition Plain Bearings - Testing of the Tribological Behaviour of Bearing Materials - Part 2: Testing of Polymer-Based Bearing Materials First Edition Continuous Handling Equipment - Safety Code - Special Rules First Edition Water Quality - Determination of Ammonium - Part 1: Manual Spectrometric Method First Edition Surgical Instruments - Non-Cutting, Articulated Instruments - General Requirements and Test Methods Second Edition Camping Tents and Caravan Awnings - Vocabulary and List of Equivalent Terms Tentes de camping et auvents de caravane Vocabularie et liste de termes equivalents Second Edition; Amendment: 04/01/2006 Surgical Instruments - Metallic Materials - Part 1: Stainless Steel Second Edition; Amendment 1: 03-01-1999 Documentation - Bibliographic Filing Principles First Edition Refined Nickel - Sampling First Edition Performance Standards in Building - Contents and Format of Standards for Evaluation of Performance First Edition Fire Fighting - Portable Fire Extinguishers - Performance and Construction First Edition; Amendment 1: 05/01/2004; Amendment 2: 05/01/2004 Aircraft - Rail and Stud Configuration for Passenger Equipment and Cargo Restraint First Edition Air Quality - Exchange of Data - Part 1: Gneral Data Format First Edition Air Quality - Exchange of Data - Part 2: Condensed Data Format First Edition Aerospace ù Separable tube fittings for fluid systems, for 24░ cones, for pressures up to 3 000 psi or 21 000 kPa ù Procurement specification, inch/metric Fourth Edition Furniture Storage units Determination of strength and durability Second Edition Furniture - Storage Units - Determination of Stability First Edition Furniture - Tables - Determination of Stability First Edition Furniture - Chairs and Stools - Determination of Strength and Durability First Edition Furniture - Chairs - Determination of Stability Part 1: Upright Chairs and Stools First Edition Furniture - Chairs - Determination of Stability - Part 2: Chairs with Tilting or Reclining Mechanisms When Fully Reclined, and Rocking Chairs First Edition Children┤s Cots and Folding Cots for Domestic Use - Part 1: Safety Requirements First Edition Children┤s Cots and Folding Cots for Domestic Use - Part 2: Test Methods Second Edition Wheelchairs - Part 1: Determination of Static Stability Second Edition Wheelchairs - Part 2: Determination of Dynamic Stability of Electric Wheelchairs Second Edition

ISO

7176-3

Wheelchairs - Part 3: Determination of Effectiveness of Brakes Second Edition Wheelchairs Part 4: Energy Consumption of Electric Wheelchairs and Scooters for Determination of Theoretical Distance Range Second Edition Wheelchairs - Part 5: Determination of Overall Dimensions, Mass and Turning Space First Edition

ISO ISO

7176-4 7176-5

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

7176-6 7176-7 7176-8 7176-9 7176-10 7176-11 7176-13 7176-14 7176-15 7176-16 7176-19

ISO ISO ISO ISO ISO ISO ISO ISO ISO

7176-21 7176-22 7176-23 7176-24 7176-26 7180 7181 7183 7183-2

Wheelchairs - Part 6: Determination of Maximum Speed, Acceleration and Retardation of Electric Wheelchairs Second Edition Wheelchairs - Part 7: Measurement of Seating and Wheel Dimensions First Edition Wheelchairs - Part 8: Requirements and Test Methods for Static, Impact and Fatigue Strengths First Edition Wheelchairs - Part 9: Climatic Tests for Electric Wheelchairs Second Edition Wheelchairs - Part 10: Determination of Obstacle-Climbing Ability of Electric Wheelchairs First Edition Wheelchairs - Part 11: Test Dummies First Edition; (CSA CAN/CSA-Z323.4.8- 94) Wheelchairs - Part 13: Determination of Coefficient of Friction of Test Surfaces First Edition; (CSA CAN/CSA-Z323.4.9- 94) Wheelchairs - Part 14: Power and Control Systems for Electric Wheelchairs - Requirements and Test Methods First Edition Wheelchairs - Part 15: Requirements for Information Disclosure, Documentation and Labelling First Edition Wheelchairs - Part 16: Resistance to Ignition of Upholstered Parts - Requirements and Test Methods First Edition Wheelchairs - Part 19: Wheeled Mobility Devices for Use in Motor Vehicles First Edition Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters First Edition [Superseded By: GOST R 52583] Wheelchair - Part 22: Set-Up Procedures First Edition Wheelchairs - Part 23: Requirements and Test Methods for Attendant-Operated Stair-Climbing Devices First Edition Wheelchairs - Part 24: Requirements and test methods for useroperated stair-climbing devices First Edition Wheelchairs ù Part 26: Vocabulary First edition [Superseded: ISO 6440] Pneumatic Fluid Power - Cylinders - Bore and Port Thread Sizes First Edition Hydraulic Fluid Power - Cylinders - Bore and Rod Area Ratios Second Edition Compressed Air Dryers - Specifications and Testing First Edition Compressed Air Dryers - Part 2: Performance Ratings First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO

7185 7186 7187 7189 7190 7193 7195 7196 7197 CORR 1

Information Technology - Programming Languages - Pascal Second Edition; CEN EN 27185: 1992; CAN/CSA-ISO/IEC 7185-95 Ductile Iron Products for Sewage Applications Second Edition Photography - Materials for Direct-Positive Colour-Print Cameras - Determination of ISO Speed Second Edition Continuous Mechanical Handling Equipment - Apron Conveyors - Design Rules First Edition Continuous Mechanical Handling Equipment - Bucket Elevators - Classification First Edition Wheelchairs - Maximum Overall Dimensions First Edition Nuclear energy - Packaging of uranium hexafluoride (UF6) for transport Second Edition Acoustics - Frequency-Weighting Characteristic for Infrasound Measurements First Edition Neurosurgical Implants - Sterile, Single-Use Hydrocephalus Shunts and Components Third Edition

ISO ISO ISO ISO

7197 7198 7199 7200

ISO

7201-1

ISO ISO

7201-2 7202

ISO

7203-1

ISO

7203-2

ISO ISO

7203-3 7205

ISO

7206-1

ISO

7206-2

ISO

7206-4

ISO

7206-6

ISO

7206-8

ISO

7206-10

ISO

7207-1

ISO

7207-2

ISO ISO

7208 7210

Neurosurgical Implants - Sterile, Single-Use Hydrocephalus Shunts and Components Third Edition Cardiovascular Implants - Tubular Vascular Prostheses First Edition Cardiovascular Implants and Artificial Organs - Blood-Gas Exchangers (Oxygenators) First Edition Technical product documentation Data fields in title blocks and document headers Second Edition Fire Protection - Fire Extinguishing Media - Halogenated Hydrocarbons - Part 1: Specifications for Halon 1211 and Halon 1301 Second Edition; (CEN EN 27201-1: 1994) Fire Extinguishing Media - Halogenated Hydrocarbons - Part 2: Code of Practice for Safe Handling and Transfer Procedures of Halon 1211 and Halon 1301 First Edition; (CEN EN 27201-2: 1994) Fire Protection - Fire Extinguishing Media - Powder First Edition; (Corrected and Reprinted - 1988) Fire Extinguishing Media - Foam Concentrates - Part 1: Specification for Low Expansion Foam Concentrates for Top Application to Water-Immiscible Liquids First Edition Fire Extinguishing Media - Foam Concentrates - Part 2: Specification for Medium and High Expansion Foam Concentrates for Top Application to Water-Immiscible Liquids First Edition Fire Extinguishing Media - Foam Concentrates - Part 3: Specification for Low Expansion Foam Concentrates for Top Application to Water-Miscible Liquids Second Edition Radionuclide Gauges - Gauges Designed for Permanent Installation First Edition Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 1: Classification and Designation of Dimensions Second Edition Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 2: Articulating Surfaces Made of Metallic, Ceramic and Plastics Materials Second Edition; (CAN/CSA-Z310.14-M92) Implants for surgery Partial and total hip joint prostheses Part 4: Determination of endurance properties of stemmed femoral components Second Edition Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 6: Determination of Endurance Properties of Head and Neck Region of Stemmed Femoral Components First Edition Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 8: Endurance Performance of Stemmed Femoral Components with Application of Torsion First Edition Implants for surgery Partial and total hip-joint prostheses Part 10: Determination of resistance to static load of modular femoral heads First Edition Implants for surgery ù Components for partial and total knee joint prostheses ù Part 1: Classification, definitions and designation of dimensions Third Edition Implants for Surgery - Components for Partial and Total Knee-Joint Prostheses - Part 2: Articulating Surfaces Made of Metal, Ceramic and Plastics Materials First Edition Skimmed Milk, Whey and Buttermilk - Determination of Fat Content - Gravimetric Method (Reference Method) Second Edition Routine Analytical Cigarette-Smoking Machine - Additional Test Methods

Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1: Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and Lifting First Edition Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 2: Determination of Number of Threads per Unit Length First Edition; (CEN EN 1049-2:1993)

ISO

7211-1

ISO

7211-2

ISO

7211-3

ISO

7211-4

ISO

7211-5

ISO ISO ISO ISO ISO

7211-6 7212 7213 7214 7215

ISO

7216

Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 3: Determination of Crimp of Yarn in Fabric First Edition Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 4: Determination of Twist in Yarn Removed from Fabric First Edition Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 5: Determination of Linear Density of Yarn Removed from Fabric First Edition Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 6: Determination of the Mass of Warp and Weft per Unit Area of Fabric First Edition; (PNS 498: 1992) Enclosures for Protection Against Ionizing Radiation - Lead Shielding Units for 50 mm and 100 mm Thick Walls First Edition Pulps - Sampling for Testing First Edition; (CEN EN 27213: 1993) Cellular Plastics - Polyethylene - Methods of Test Third Edition Iron Ores - Determination of Relative Reducibility Second Edition Acoustics - Agricultural and Forestry Wheeled Tractors and Self-Propelled Machines - Measurement of Noise Emitted When in Motion First Edition

ISO ISO

7218 7220

Microbiology of food and animal feeding stuffs ù General requirements and guidance for microbiological examinations Third Edition Information and Documentation - Presentation of Catalogues of Standards First Edition; Corrigendum 1 11/15/2001

ISO ISO ISO ISO ISO ISO ISO ISO ISO

7221 7222 7224 7225 7226 7227 7229 7231 7233

ISO ISO

7235 7236

ISO

7237

Shipbuilding and Marine Structures - Shipborne Barges, Series 1, on Barge Carriers - Principal Technical Requirements First Edition Shipbuilding - Shipborne Barges, Series 2 - Main Dimensions First Edition Equipment for Vine Cultivation and Wine Making - Mash Pumps - Methods of Test First Edition Gas cylinders - Precautionary labels Second Edition Hexagonal Dienuts Second Edition Road vehicles Lighting and light signalling devices Vocabulary First Edition: Amendment 1: 9/1/2004 Rubber- or Plastics-Coated Fabrics - Measurement of Gas Permeability First Edition Polymeric Materials, Cellular Flexible - Method of Assessment of Air Flow Value at Constant Pressure-Drop First Edition Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum Third edition Acoustics Laboratory measurement procedures for ducted silencers and air-terminal units Insertion loss, flow noise and total pressure loss Second Edition Inland Navigation Vessels - Demountable Signal Masts for Push-Tows - Mounting Attachment First Edition Caravans - Masses and Dimensions - Vocabulary Caravanes - Masses Et Dimensions - Vocabulaire Second Edition; Amendment 1: 09/01/2001

ISO ISO ISO ISO ISO ISO ISO

7238 7240-1 7240-2 7240-4 7240-5 CORR 1 7240-5 7240-6

Butter - Determination of pH of the Serum - Potentiometric Method Second Edition Fire detection and alarm systems Part 1: General and definitions Second Edition Fire detection and alarm systems Part 2: Control and indicating equipment First Edition Fire detection and alarm systems Part 4: Power supply equipment First Edition Fire detection and alarm systems ù Part 5: Point-type heat detectors TECHNICAL CORRIGENDUM 1 First Edition Fire detection and alarm systems ù Part 5: Point-type heat detectors First Edition Fire detection and alarm systems Part 6: Carbon monoxide fire detectors using electro-chemical cells First Edition

ISO

7240-7

ISO ISO ISO ISO ISO ISO ISO

7240-8 7240-10 7240-11 7240-12 7240-13 7240-15 CORR 1 7240-15

ISO

7240-16

ISO ISO ISO ISO ISO

7240-19 7240-21 7240-22 7241-1 7241-2

ISO ISO

7243 7244

Fire detection and alarm systems Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization First Edition Fire detection and alarm systems ù Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor First Edition Fire detection and alarm systems ù Part 10: Point-type flame detectors First Edition Fire detection and alarm systems Part 11: Manual call points First Edition Fire detection and alarm systems Part 12: Line type smoke detectors using a transmitted optical beam First Edition Fire detection and alarm systems Part 13: Compatibility assessment of system components First Edition Fire detection and alarm systems ù Part 15: Multisensor fire detectors TECHNICAL CORRIGENDUM 1 First Edition Fire detection and alarm systems ù Part 15: Multisensor fire detectors First Edition Fire detection and alarm systems ù Part 16: Sound system control and indicating equipment First Edition [Cancelled: IEC 60849, IEC 60849] Fire detection and alarm systems ù Part 19: Design, installation, commissioning and service of sound systems for emergency purposes First Edition [Replaced: IEC 60849, IEC 60849] Fire detection and alarm systems - Part 21: Routing equipment First Edition Fire detection and alarm systems ù Part 22: Smoke-detection equipment for ducts First Edition Hydraulic Fluid Power - Quick-Action Couplings - Part 1: Dimensions and Requirements First Edition Hydraulic Fluid Power - Quick-Action Couplings - Part 2: Test Methods Second Edition Hot Environments - Estimation of the Heat Stress on Working Man, Based on the WBGT-Index (Wet Bulb Globe Temperature) Second Edition; (CEN EN 27243: 1993) (NZS/ISO 7243: 1989) Air Distribution and Air Diffusion - Aerodynamic Testing of Dampers and Valves First Edition

ISO

7245

Pipes and Fittings of Acrylonitrile-Butadiene-Styrene (ABS) - General Specification for Moulding and Extrusion Materials First Edition

ISO ISO

7246 7250

Pipes and Fittings of Acrylonitrile/Styrene/ Acrylester (ASA) - General Specification for Moulding and Extrusion Materials First Edition Basic Human Body Measurements for Technological Design First Edition

ISO

7251

Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of presumptive Escherichia coli Most probable number technique Third edition; Cancels and replaces ISO 11866-1:1997 and IDF 170-1:1999.

ISO ISO ISO ISO ISO

7252 7255 7256-1 7256-2 7257

ISO ISO

7258 7259

ISO ISO ISO ISO ISO ISO ISO

7263 7266 7267-1 7267-2 7267-3 7268 7269

ISO

7270-1

ISO ISO

7270-2 7271

ISO ISO

7274 7275

ISO

7278-1

ISO

7278-2

ISO

7278-3

ISO

7278-4

ISO

7279

ISO

7284

Paints and Varnishes - Determination of Total Mercury - Flameless Atomic Absorption Spectrometric Method First Edition Shipbuilding - Active Control Units of Ships - Vocabulary First Edition Sowing Equipment - Test Methods - Part 1: Single Seed Drills (Precision Drills) First Edition Sowing Equipment - Test Methods - Part 2: Seed Drills for Sowing in Lines First Edition Aircraft - Hydraulic Tubing Joints and Fittings - Rotary Flexure Test First Edition Polytetrafluoroethylene (PTFE) Tubing for Aerospace Applications - Methods for the Determination of the Density and Relative Density First Edition Predominantly Key-Operated Cast Iron Gate Valves for Underground Use First Edition Corrugating Medium - Determination of the Flat Crush Resistance After Laboratory Fluting Second Edition; (CEN EN ISO 7263: 1995) Copper and Copper Alloys - Determination of Sulfur Content - Combustion Titrimetric Method First Edition Rubber-Covered Rollers - Determination of Apparent Hardness - Part 1: IRHD Method Second Edition Rubber-Covered Rollers - Determination of Apparent Hardness - Part 2: Shore-Type Durometer Method First Edition Rubber-covered rollers - Determination of apparent hardness - Part 3: Pusey and Jones method Second Edition Pipe Components - Definition of Nominal Pressure First Edition; Amendment 1: 1984 Rubber - Determination of Free Sulfur Second Edition Corrigendum 1 5/15/2002 Rubber - Analysis by Pyrolytic Gas-Chromatographic Methods - Part 1: Identification of Polymers (Single Polymers and Polymer Blends) First Edition Rubber Analysis by pyrolytic gas-chromatographic methods Part 2: Determination of styrene/butadiene/isoprene ratio First Edition Aluminium and Aluminium Alloys - Foil and Thin Strip - Dimensional Tolerances First Edition Wrought Aluminium and Aluminium Alloys - Drawn Round Bars - Tolerances on Shape and Dimensions (All Minus Tolerances on Diameter) First Edition Documentation - Presentation of Title Information of Series First Edition Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 1: General Principles First Edition; (CEN EN ISO 7278-1: 1995) Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 2: Pipe Provers First Edition; (CEN EN ISO 7278-2: 1995) Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 3: Pulse Interpolation Techniques Second Edition Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 4: Guide for Operators of Pipe Provers First Edition Polypropylene (PP) Fittings for Pipes Under Pressure - Sockets for Fusion Using Heated Tools - Metric Series - Dimensions of Sockets First Edition Resistance Welding Equipment - Particular Specifications Applicable to Transformers with Two Separate Secondary Windings for Multi-Spot Welding, as Used in the Automobile Industry Second Edition CEN EN ISO 7284: 1996

ISO ISO ISO ISO

7285 7286 7287 7289

Pneumatic Cylinders for Mechanized Multiple Spot Welding First Edition Graphical Symbols for Resistance Welding Equipment First Edition Graphical Symbols for Thermal Cutting Equipment Symboles Graphiques Pour Equipments de Coupage Thermique Quick-Action Couplings with Shut-Off Valves for Gas Welding, Cutting and Allied Processes Second Edition Gas Welding Equipment - Pressure Regulators for Manifold Systems Used in Welding, Cutting and Allied Processes up to 300 Bar Second Edition

ISO

7291

ISO ISO ISO ISO

7292 7293 7294 7295

ISO ISO

7296-1 7296-2

ISO

7296-3

ISO

7297

ISO ISO ISO ISO

7298 7299-1 7301 7302

ISO ISO ISO ISO

7304 7305 7308 7309

Durum Wheat Semolinas and Alimentary Pasta - Estimation of Cooking Quality of Spaghetti by Sensory Analysis First Edition Milled Cereal Products - Determination of Fat Acidity Second Edition Road Vehicles - Petroleum-Based Brake-Fluid for Stored-Energy Hydraulic Brakes First Edition Road Vehicles - Hydraulic Braking Systems - ISO Reference Petroleum Base Fluid First Edition

ISO ISO ISO ISO ISO ISO ISO

7310 7311 7313 7314 7315 7319 7320

Diesel Engines - Heads for Spin-On Fuel Filters with Horizontal Flange - Mounting and Connecting Dimensions Second Edition Diesel Engines - Heads for Fuel Filters with Vertical Flange - Mounting and Connecting Dimensions Second Edition Aircraft - High Temperature Convoluted Hose Assemblies in Polytetrafluoroethylene (PTFE) First Edition Aerospace - Fluid Systems - Metal Hose Assemblies Third Edition Aerospace -P" Clamps (Loop Clamps) for Fluid Systems - Envelope Dimensions Second Edition" Aerospace - Fluid Systems - Interface of 24 Degree Cone Metric Couplings Second Edition Aerospace - Couplings, Threaded and Sealed, for Fluid Systems - Dimensions Second Edition

Flowmeter Regulators used on Cylinders for Welding, Cutting and Allied Processes - Classification and Specifications First Edition Forestry Machinery - Portable Chain-Saws - Engine Performance and Fuel Consumption Second Edition Saw Teeth for Woodworking Saws - Profile Shape - Terminology and Designation First Edition Tyre Valves for Aircraft - Interchangeability Dimensions Second Edition Cranes - Graphic Symbols - Part 1: General Appareils De Levage A Charge Suspendue - Symboles Graphiques - Partie 1: Generalites First Edition; Amendment 1 12-15-1996 Cranes - Graphical Symbols - Part 2: Mobile Cranes First Edition Cranes Graphical symbols Part 3: Tower cranes Appareils de levage Ó charge suspendue Symboles graphiques Partie 3: Grues Ó tour First Edition Information Processing - Magnetic Disk for Data Storage Devices - 96 000 Flux Transitions per Track, 200 mm (7.9 in) Outer Diameter, 63,5 mm (2.5 in) Inner Diameter First Edition Information Processing - Magnetic Disk for Data Storage Devices - 158 000 Flux Transitions per Track, 210 mm (8.3 in) Outer Diameter, 100 mm (3.9 in) Inner Diameter First Edition Diesel engines ù End-mounting flanges for pumps ù Part 1: Fuel injection pumps First Edition [Superseded: ISO 7299] Rice - Specification Second Edition Cereals and Cereal Products - Determination of Total Fat Content First Edition

ISO

7322

ISO ISO ISO

7323 7326 7327

ISO ISO

7328 7331

ISO ISO ISO

7332 7335 7341

ISO ISO

7343 7345

ISO

7346-1

ISO

7346-2

ISO ISO ISO ISO ISO

7346-3 7347 7348 7349 7350

ISO

7355

ISO

7356

ISO

7357

ISO ISO

7358 7359

Composition Cork - Test Methods Second Edition Rubber, raw and unvulcanized compounded Determination of plasticity number and recovery number Parallel-plate method Second Edition Rubber and plastics hoses Assessment of ozone resistance under static conditions Third Edition Plastics - Hardeners and Accelerators for Epoxide Resins - Determination of Free Acid in Acid Anhydride First Edition Milk-Based Edible Ices and Ice Mixes - Determination of Fat Content - Gravimetric Method (Reference Method) Second Edition Ski-poles for alpine skiing - Requirements and test methods Third Edition Aerospace - Nuts, Anchor, Self-Locking, Floating, Two Lug, Reduced Series, with Counterbore, with MJ Threads, ClassificationS: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition Iron Ores - Determination of Combined Water Content - Karl Fischer Titrimetric Method First Edition Banking - Nostro Accounts Reconciliation Third edition Cinematography - Two-Track Photographic Sound Records on 35 mm Motion-Picture Prints - Positions and Width Dimensions Second Edition Thermal Insulation - Physical Quantities and Definitions Second Edition; (CEN EN ISO 7345: 1995) Water Quality - Determination of the Acute Lethal Toxicity of Substances to a Freshwater Fish (Brachydanio Rerio HamiltonBuchanan (Teleostei, Cyprinidae)) - Part 1: Static Method Second Edition Water Quality - Determination of the Acute Lethal Toxicity of Substances to a Freshwater Fish (Brachydanio Rerio HamiltonBuchanan (Teleostei, Cyprinidae)) - Part 2: Semi-Static Method Second Edition Water Quality - Determination of the Acute Lethal Toxicity of Substances to a Freshwater Fish (Brachydanio Rerio HamiltonBuchanan (Teleostei, Cyprinidae)) - Part 3: Flow-Through Method Second Edition Ferroalloys - Experimental Methods for Checking the Bias of Sampling and Sample Preparation First Edition Glass Containers - Manufacture - Vocabulary First Edition Thermoplastics Valves - Connection References First Edition Information Technology - Registration of Repertoires of Graphic Characters from ISO/IEC 10367 Second Edition Oils of Sassafras and Nutmeg - Determination of Safrole and cis- and trans-isosafrole Content - Gas Chromatographic Method on Packed Columns First Edition Oil of Thujone-Containing Artemisia and Oil of Sage (Salvia Officinalis Linnaeus) - Determination of Alpha Particle and Beta RayThujone Content - Gas Chromatographic Method on Packed Columns First Edition Oil of Calamus - Determination of cis-Beta Ray-Asarone Content - Gas Chromatographic Method on Packed Columns First Edition Oils of bergamot, lemon, citron and lime,fully or partially reduced in bergapten Determination of bergapten content by high-pressure liquid chromatography (HPLC) First edition Essential Oils - Analysis by Gas Chromatography on Packed Columns - General Method First Edition

ISO ISO ISO ISO ISO ISO

7361 7363 7364 7365 7366 7368

ISO

7369

ISO ISO

7370 7372

ISO

7373

ISO

7375-1

ISO

7375-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

7376 7377 7378 7379 7380 7382 7384 7385 7386 7387-1

ISO

7388-1

ISO

7388-2

ISO ISO

7388-3 7389

Performance Standards in Building - Presentation of Performance Levels of Facades Made of Same-Source Components First Edition Cranes and Lifting Appliances - Technical Characteristics and Acceptance Documents First Edition Shipbuilding and Marine Structures - Deck Machinery - Accommodation Ladder Winches First Edition Shipbuilding and Marine Structures - Deck Machinery - Towing Winches for Deep Sea Use First Edition Animal and Vegetable Fats and Oils - Determination of 1-Monoglycerides and Free Glycerol Contents First Edition Hydraulic Fluid Power - Two-Port Slip-In Cartridge Valves - Cavities First Edition Supersedes NFPA/Fluid T3.5.45 Pipework - Flexible Metallic Hoses - Vocabulary of General Terms Tuyauteries Tuyaux et tuyauteries mÚtalliques flexibles Vocabulaire Third Edition Glass Fibre Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Nominal Diameters, Specified Diameters and Standard Lengths First Edition Trade data interchange Trade data elements directory Third edition Ferroalloys - Experimental Methods for Checking the Precision of Sample Division First Edition; (Corrected and Reprinted - 1988) Road Vehicles - Coiled Pipe Assemblies for Pneumatic Braking Connection Between Motor Vehicles and Towed Vehicles - Part 1: Dimensions Second Edition Road Vehicles - Coiled Tube Assemblies for Air Brake Connection between Towing and Towed Vehicles - Part 2: Perfomance Requirements First Edition Anaesthetic and respiratory equipment Laryngoscopes for tracheal intubation First Edition; Cancels and Replaces ISO 7376-1:1994, ISO 7376-2:1997 and ISO 7376-3:1996 Juniper Berries (Juniperus Communis Linnaeus) - Specification First Edition Fasteners - Bolts, Screws and Studs - Split Pin Holes and Wire Holes First Edition Hexagon Socket Head Shoulder Screws First Edition Hexagon Socket Button Head Screws Third Edition Ethylene for Industrial Use - Sampling in the Liquid and the Gaseous Phase First Edition Corrosion Tests in Artificial Atmosphere - General Requirements First Edition; (CEN EN ISO 7384: 1995) Nuclear Power Plants - Guidelines to Ensure Quality of Collected Data on Reliability First Edition Aniseed (Pimpinella Anisum Linnaeus) - Specification First Edition Adhesives with Solvents for Assembly of u PVC Pipe Elements - Characterization - Part 1: Basic Test Methods First Edition Tool shanks with 7/24 taper for automatic tool changers ù Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF Second Edition Tool shanks with 7/24 taper for automatic tool changers ù Part 2: Dimensions and designation of shanks of forms J, JD and JF Second Edition Tool shanks with 7/24 taper for automatic tool changers ù Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF First Edition Building Construction - Jointing Products - Determination of Elastic Recovery of Sealants Third Edition

ISO

7390

Building Construction - Jointing Products - Determination of Resistance to Flow Sealants Third Edition

ISO

7391-1

ISO

7391-2

ISO

7393-1

ISO

7393-2

ISO ISO ISO ISO

7393-3 7396 7396-1 7396-2

Plastics Polycarbonate (PC) moulding and extrusion materials Part 1: Designation system and basis for specifications Third Edition Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties Third Edition Water Quality - Determination of Free Chlorine and Total Chlorine - Part 1: Titrimetric Method Using N,N-Diethyl-1,4Phenylenediamine First Edition; Corrigendum 1: 03-15-2001 Water Quality - Determination of Free Chlorine and Total Chlorine - Part 2: Colorimetric Method Using N,N-Diethyl-1,4Phenylenediamine, for Routine Control Purposes First Edition Water Quality - Determination of Free Chlorine and Total Chlorine - Part 3: Iodometric Titration Method for the Determination of Total Chlorine Second Edition Non-Flammable Medical Gas Pipeline Systems First Edition Medical gas pipeline systems ù Part 1: Pipeline systems for compressed medical gases and vacuum Second Edition Medical gas pipeline systems ù Part 2: Anaesthetic gas scavenging disposal systems Second edition

ISO ISO ISO ISO ISO ISO ISO ISO

7397-1 7397-2 7398 7399 7400 7401 7403 7404-1

Passenger Cars - Verification of Driver┤s Direct Field of View - Part 1: Vehicle Positioning for Static Measurement First Edition Passenger Cars - Verification of Driver┤s Direct Field of View - Part 2: Test Method First Edition Motorcycles - Direct Current Flasher Units Second Edition Motorcycles - Alternating Current Flasher Units Second Edition Mopeds - Alternating Current Flasher Units Second Edition Road Vehicles - Lateral Transient Response Test Methods - Open-Loop Test Methods Second Edition Aerospace - Spline Drive - Wrenching Configuration - Metric Series Second Edition Methods for the Petrographic Analysis of Bituminous Coal and Anthracite - Part 1: Vocabulary Second Edition

ISO

7404-2

ISO

7404-3

ISO

7404-4

ISO

7404-5

ISO ISO

7405 7407

ISO

7408

Methods for the Petrographic Analysis of Bituminous Coal and Anthracite - Part 2: Method of Preparing Coal Samples First Edition Methods for the Petrographic Analysis of Bituminous Coal and Anthracite - Part 3: Method of Determining Maceral Group Composition Second Edition Methods for the Petrographic Analysis of Bituminous Coal and Anthracite - Part 4: Method of Determining Microlithotype, Carbominerite and Minerite Composition First Edition Methods for the Petrographic Analysis of Bituminous Coal and Anthracite - Part 5: Method of Determining Microscopically the Reflectance of Vitrinite Second Edition Dentistry - Preclinical Evaluation of Biocompatability of Medical Devices Used in Dentistry - Test Methods for Dental Materials First Edition; Replaces ISO TR 7405 Fertilizers - Determination of Acid-Soluble Potassium Content - Preparation of the Test Solution First Edition Fertilizers - Determination of Ammoniacal Nitrogen Content in the Presence of Other Substances Which Release Ammonia When Treated with Sodium Hydroxide - Titrimetric Method First Edition

ISO ISO

7409 7410

ISO

7411

ISO

7412

ISO

7413

ISO ISO ISO

7414 7415 7416

ISO

7417

ISO

7425-1

ISO

7425-2

ISO ISO ISO ISO

7432 7434 7435 7436

ISO ISO ISO ISO ISO

7437 7438 7439 7440-1 7440-2

ISO

7441

ISO ISO ISO ISO

7451 7452 7457 7458

Fertilizers - Marking - Presentation and Declarations First Edition Fertilizers and Soil Conditioners - Final Samples - Practical Arrangements First Edition Hexagon Bolts for High-Strength Structural Bolting with Large Width Across Flats (Thread Lengths According to ISO 888) - Product Grade C - Property Classes 8.8 and 10.9 First Edition Hexagon Bolts for High-Strength Structural Bolting with Large Width Across Flats (Short Thread Length) - Product Grade C - Property Classes 8.8 and 10.9 First Edition Hexagon Nuts for Structural Bolting, Style 1, Hot-Dip Galvanized (Oversize Tapped) - Product Grades A and B - Property Classes 5, 6 and 8 First Edition Hexagon Nuts for Structural Bolting with Large Width Across Flats, Style 1 - Product Grade B - Property Class 10 First Edition Plain Washers for High-Strength Structural Bolting, Hardened and Tempered First Edition Plain Washers, Chamfered, Hardened and Tempered for High-Strength Structural Bolting First Edition Hexagon Nuts for Structural Bolting - Style 2, Hot-Dip Galvanized (Oversize Tapped) - Product Grade A - Property Class 9 First Edition Hydraulic Fluid Power - Housings for Elastomer-Energized, Plastic-Faced Seals - Dimensions and Tolerances - Part 1: Piston Seal Housings First Edition Hydraulic Fluid Power - Housings for Elastomer-Energized, Plastic-Faced Seals - Dimensions and Tolerances - Part 2: Rod Seal Housings First Edition Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings Test Methods to Prove the Design of Locked Socket-and-Spigot Joints, Including Double-Socket Joints, with Elastomeric Seals First Edition Slotted Set Screws with Cone Point First Edition; (NZS/ISO 7434: 1983) Slotted Set Screws with Long Dog Point First Edition; (NZS/ISO 7435: 1983) Slotted Set Screws with Cup Point First Edition; (NZS/ISO 7436: 1983) Technical Drawings - Construction Drawings - General Rules for Execution of Production Drawings for Prefabricated Structural Components First Edition; (CEN EN ISO 7437: 1996) Metallic materials - Bend test Second Edition Copper-Bearing Intra-Uterine Contraceptive Devices - Requirements, Tests Second Edition; Replaces ISO TR 7439 Road Vehicles - Fuel Injection Equipment Testing - Part 1: Calibrating Nozzle and Holder Assemblies Second Edition Road Vehicles - Fuel Injection Equipment Testing - Part 2: Orifice Plate Flow-Measurement Second Edition Corrosion of Metals and Alloys - Determination of Bimetallic Corrosion in Outdoor Exposure Corrosion Tests First Edition; (CEN EN ISO 7441: 1995) Earth-moving machinery - Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders Third edition Hot-Rolled Structural Steel Plates - Tolerances on Dimensions and Shape Second Edition Earth-Moving Machinery - Determination of Turning Dimensions of Wheeled Machines Second Edition Glass Containers - Internal Pressure Resistance - Test Methods Second Edition

ISO ISO ISO ISO ISO ISO ISO

7459 7460 7461 7462 7464 7465 7466

ISO

7476

ISO

7478

ISO

7480

ISO ISO ISO ISO ISO

7481 7482-1 7482-2 7482-3 7483

ISO

7485

ISO

7487-1

Glass Containers - Thermal Shock Resistance and Thermal Shock Endurance - Test Methods Second Edition Shipbuilding - Shiplines - Identification of Geometric Data First Edition Shipbuilding - Shiplines - Numerical Representation of Elements of the Hull Geometry First Edition Shipbuilding - Principal Ship Dimensions - Terminology and Definitions for Computer Applications First Edition Earth-Moving Machinery - Method of Test for the Measurement of Drawbar Pull First Edition Passenger Lifts and Service Lifts - Guide Rails for Lift Cars and Counterweights - T-Type Third Edition Fruit and Vegetable Products - Determination of 5-Hydroxymethylfurfural (5-HMF) Content First Edition Nuclear fuel technology Determination of uranium in uranyl nitrate solutions of nuclear grade quality Gravimetric method Second Edition Information Processing Systems - Data Communication - Multilink Procedures First Edition; Corrigendum 1-1989; NZS/ISO 7478: 1987 Information Technology - Telecommunications and Information Exchange between Systems - Start-Stop Transmission Signal Quality at DTE/DCE Interfaces Second Edition; AS/NZS 3618: 1993; CAN/CSA-ISO/IEC 7480-95 Aerospace - Nuts, Self-Locking, with Maximum Operating Temperature Less Than or Equal to 425 Degrees Celsius - Test Methods Second Edition Raw Goat Skins - Part 1: Descriptions of Defects First Edition Raw Goat Skins - Part 2: Guidelines for Grading on the Basis of Mass and Size First Edition Raw goat skins Part 3: Guidelines for grading on the basis of defects First Edition Dimensions of Gaskets for Use with Flanges to ISO 7005 First Edition; Corrigendum 1: 1995 Animal Feeding Stuffs - Determination of Potassium and Sodium Contents - Methods Using Flame-Emission Spectrometry First Edition Information Technology - Data Interchange on 130 mm (5,25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on Both Sides - ISO Type 202 - Part 1: Dimensional, Physical and Magnetic Characteristics Second Edition; CAN/CGSB-186.78-93

ISO

7487-2

Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on Both Sides - Part 2: Track Format A First Edition; CAN/CGSB-186.8-93

ISO ISO ISO ISO ISO ISO ISO

7487-3 7488 7491 7492 7493 7494-1 7494-2

Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on Both Sides - Part 3: Track Format B Second Edition; Corrigendum 1-1991 Dental Amalgamators First Edition; (CEN EN ISO 7488: 1995) (CAN/CSA-Z349.52-94) Dental Materials - Determination of Colour Stability Second Edition Dental Explorers Second Edition Dentistry Operator's stool Third Edition Dentistry Dental units Part 1: General requirements and test methods First Edition; Cancels and Replaces ISO 7494:1996 Dentistry - Dental Units - Part 2: Water and Air Supply First Edition

ISO

7497

ISO

7498-1

ISO ISO

7498-2 7498-3

ISO

7498-4

ISO

7500-1

ISO ISO ISO

7500-2 7501-2 7501-3

ISO ISO

7503-1 7503-2

ISO ISO

7503-3 7504

ISO

7506

ISO

7507-1

ISO

7507-2

ISO

7507-3

ISO

7507-4

ISO ISO

7507-5 7508

ISO

7509

Fertilizers - Extraction of Phosphates Soluble in Mineral Acids First Edition Information Technology - Open Systems Interconnection - Basic Reference Model: the Basic Model Second Edition; CEN EN ISO/IEC 7498-1: 1995; CAN/CSA-ISO/IEC 7498-1-95; Corrected and Reprinted - 1996; AS/NZS 2777.1: 1996 Information Processing Systems - Open Systems Interconnection - Basic Reference Model - Part 2: Security Architecture First Edition Information Technology - Open Systems Interconnection - Basic Reference Model: Naming and Addressing Second Edition Information Processing Systems - Open Systems Interconnection - Basic Reference Model - Part 4: Management Framework First Edition Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines - Verification and Calibration of the Force-Measuring System Third Edition Metallic materials Verification of static uniaxial testing machines Part 2: Tension creep testing machines Verification of the applied force Second Edition Identification Cards - Machine Readable Travel Documents - Part 2: Machine Readable Visa Second Edition Identification cards - Machine readable travel documents - Part 3: Machine readable official travel documents Second Edition Evaluation of Surface Contamination - Part 1: Beta-Emitters (Maximum Beta Energy Greater Than 0.15 MeV) and Alpha-Emitters First Edition Evaluation of Surface Contamination - Part 2: Tritium Surface Contamination First Edition Evaluation of Surface Contamination - Part 3: Isomeric Transition and Electron Capture Emitters, Low Energy Beta-Emitters (Energy Beta max is Less Than 0,15 MeV) First Edition Gas Analysis - Vocabulary Analyse Des Gaz - Vocabulaire Second Edition Textile Machinery and Accessories - Numbering of Harnesses for Drawing-In on Jacquard Machines First Edition; (Corrected and Reprinted - 1992) Petroleum and liquid petroleum products Calibration of vertical cylindrical tanks Part 1: Strapping method Second Edition; Replaces ISO TR 7507-6 Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 2: Optical-reference-line method Second edition Petroleum and Liquid Petroleum Products - Calibration of Vertical Cylindrical Tanks - Part 3: Optical-Triangulation Method Second Edition Petroleum and Liquid Petroleum Products - Calibration of Vertical Cylindrical Tanks - Part 4: Internal Electro-Optical DistanceRanging Method First Edition Cobranded with API MPMS 2.2D Petroleum and Liquid Petroleum Products - Calibration of Vertical Cylindrical Tanks - Part 5: External Electro-Optical DistanceRanging Method First Edition Unplasticized Polyvinyl Chloride (PVC-U) Valves for Pipes Under Pressure - Basic Dimensions - Metric Series First Edition Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of Time to Failure under Sustained Internal Pressure First Edition

Plastics Piping Systems - Glass-Reinforced Plastics (GRP) Components - Determination of the Amounts of Constituents Using the Gravimetric Method First Edition Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Test Methods to Prove the Leaktightness of the Wall under Short-Term Internal Pressure First Edition Instant Tea in Solid Form - Determination of Moisture Content (Loss in Mass at 103 Degrees Celsius) First Edition Instant Tea in Solid Form - Determination of Total Ash First Edition Instant Tea in Solid Form - Sampling First Edition Technical Drawings - Construction Drawings - Simplified Representation of Demolition and Rebuilding First Edition Technical Drawings - Construction Drawings - General Principles of Presentation for General Arrangement and Assembly Drawings First Edition Ferronickel - Determination of Cobalt Content - Flame Atomic Absorption Spectrometric Method First Edition Nickel - Determination of Silver, Arsenic, Bismuth, Cadmium, Lead, Antimony, Selenium, Tin, Tellurium and Thallium Contents Electrothermal Atomic Absorption Spectrometric Method First Edition Nickel, Ferronickel and Nickel Alloys - Determination of Carbon Content - Infra-Red Absorption Method After Induction Furnace Combustion First Edition Nickel - Determination of Sulfur Content - Methylene Blue Molecular Absorption Spectrometric Method After Generation of Hydrogen Sulfide First Edition Nickel, Ferronickel and Nickel Alloys - Determination of Sulfur Content - Infra-Red Absorption Method After Induction Furnace Combustion First Edition Nickel, Ferronickel and Nickel Alloys - Determination of Sulfur Content - Iodimetric Titration Method After Induction Furnace Combustion First Edition Nickel Alloys - Determination of Iron Content - Titrimetric Method with Potassium Dichromate First Edition

ISO

7510

ISO ISO ISO ISO ISO

7511 7513 7514 7516 7518

ISO ISO

7519 7520

ISO

7523

ISO

7524

ISO

7525

ISO

7526

ISO ISO

7527 7528

ISO

7529

ISO ISO ISO ISO ISO

7530-1 7530-2 7530-3 7530-4 7530-5

Nickel Alloys - Determination of Chromium Content - Potentiometric Titration Method with Ammonium Iron(II) Sulfate First Edition Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 1: General Requirements and Sample Dissolution First Edition; (Corrected and Reprinted - 1992) Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 2: Determination of Cobalt Content First Edition Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 3: Determination of Chromium Content First Edition Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 4: Determination of Copper Content First Edition Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 5: Determination of Iron Content First Edition

ISO ISO ISO ISO ISO

7530-6 7530-7 7530-8 7530-9 7531

Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 6: Determination of Manganese Content First Edition Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 7: Determination of Aluminium Content First Edition Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 8: Determination of Silicon Content First Edition Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 9: Determination of Vanadium Content First Edition Wire Rope Slings for General Purposes - Characteristics and Specifications First Edition; (NZS/ISO 7531: 1987)

ISO

7535

ISO ISO

7536 7537

ISO

7539-1

ISO

7539-2

ISO

7539-3

ISO

7539-4

ISO

7539-5

ISO ISO

7539-6 7539-7

ISO

7539-8

ISO ISO ISO ISO ISO

7539-9 7540 7541 7542 7543-1

ISO ISO ISO

7543-2 7545 7546

ISO ISO ISO ISO ISO

7547 7550 7551 7558 7560

Surface Active Agents - Detergents for Domestic Machine Dishwashing - Guide for Comparative Testing of Performance First Edition Petroleum Products - Determination of Oxidation Stability of Gasoline - Induction Period Method First Edition; (CEN EN ISO 7536: 1996) Petroleum Products - Determination of Acid Number - Semi-Micro Colour-Indicator Titration Method Second Edition Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 1: General Guidance on Testing Procedures First Edition; (CEN EN ISO 7539-1: 1995) Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 2: Preparation and Use of Bent-Beam Specimens First Edition; (CEN EN ISO 7539-2: 1995) Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 3: Preparation and Use of U-Bend Specimens First Edition; (CEN EN ISO 7539-3: 1995) Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 4: Preparation and Use of Uniaxially Loaded Tension Specimens First Edition; (CEN EN ISO 7539-4: 1995) Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 5: Preparation and Use of C-Ring Specimens First Edition; (CEN EN ISO 7539-5: 1995) Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 6: Preparation and Use of Pre-Cracked Specimens for Tests Under Constant Load or Constant Displacement Second Edition Corrosion of metals and alloys Stress corrosion testing Part 7: Method for slow strain rate testing Second Edition Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 8: Preparation and Use of Specimens to Evaluate Weldments First Edition Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 9: Preparation and Use of Pre-Cracked Specimens for Tests Under Rising Load or Rising Displacement First Edition Ground paprika (Capsicum annuum L.) Specification Second Edition Ground (Powdered) Paprika - Determination of Total Natural Colouring Matter Content First Edition Ground (Powdered) Paprika (Capsicum Annuum Linnaeus) - Microscopical Examination First Edition Chillies and Chilli Oleoresins - Determination of Total Capsaicinoid Content - Part 1: Spectrometric Method First Edition Chillies and Chilli Oleoresins - Determination of Total Capsaicinoid Content - Part 2: Method Using High-Performance Liquid Chromatography First Edition Shipbuilding and Marine Structures - Inland Navigation - Single-Lock Automatic Couplings for Push Tows First Edition Earth-Moving Machinery - Loader and Front Loading Excavator Buckets - Volumetric Ratings First Edition Ships and Marine Technology - Air-Conditioning and Ventilation of Accommodation Spaces - Design Conditions and Basis of Calculations Second Edition Laboratory Glassware - Disposable Micropipettes First Edition Dental Absorbent Points First Edition Guide to the Prepacking of Fruits and Vegetables First Edition Cucumbers - Storage and Refrigerated Transport Second Edition

ISO ISO ISO ISO

7561 7562 7563 7565

Cultivated Mushrooms - Guide to Cold Storage and Refrigerated Transport First Edition Potatoes - Guidelines for Storage in Artificially Ventilated Stores First Edition Fresh Fruits and Vegetables - Vocabulary Fruits Et Legumes En L'Etat - Vocabulaire First Edition Micrographics - Readers for Transparent Microforms - Measurement of Characteristics First Edition Woodworking Machines - Thickness Planing Machines with Rotary Cutterblock for One-Side Dressing - Nomenclature and Acceptance Conditions First Edition Woodworking Machines - Planing Machines for Two-, Three-or Four-Side Dressing - Nomenclature and Acceptance Conditions First Edition

ISO

7568

ISO

7569

ISO

7570

ISO ISO

7571 7573

ISO

7574-1

ISO

7574-2

ISO

7574-3

ISO ISO

7574-4 7575

Woodworking Machines - Surface Planing and Thicknessing Machines - Nomenclature and Acceptance Conditions First Edition Woodworking Machines - Surface Planing Machines with Cutterblock for One-Side Dressing - Nomenclature and Acceptance Conditions First Edition Technical Drawings - Item Lists First Edition Acoustics - Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment - Part 1: General Considerations and Definitions First Edition Acoustics - Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment - Part 2: Methods for Stated Values for Individual Machines First Edition Acoustics - Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment - Part 3: Simple (Transition) Method for Stated Values for Batches of Machines First Edition Acoustics - Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment - Part 4: Methods for Stated Values for Batches of Machines First Edition Commercial Road Vehicles - Flat Attachment Wheel Fixing Nuts Second Edition

ISO ISO ISO ISO ISO ISO

7576 7578 7579 7583 7586 7587

Road Vehicles - Two-Stage Fuel Filters for Compression-Ignition Engines - Mounting and Connecting Dimensions Second Edition Road Vehicles - Sheath-Type Glow-Plugs - General Requirements and Test Methods Third Edition Dyestuffs - Determination of Solubility in Organic Solvents - Gravimetric Method First Edition Anodizing of Aluminium and Its Alloys - Vocabulary First Edition Butter - Determination of Water Dispersion Value First Edition; (Corrected and Reprinted - 1985) Electroplated Coatings of Tin-Lead Alloys - Specification and Test Methods First Edition

ISO ISO ISO ISO ISO ISO

7588-1 7588-2 7588-3 7589 7590 7591

Road Vehicles - Electrical/Electronic Switching Devices - Part 1: Relays and Flashers First Edition; Replaces ISO TR 8857:1986 Road Vehicles - Electrical/Electronic Switching Devices - Part 2: Electronic Devices First Edition Road Vehicles - Electrical/Electronic Switching Devices - Part 3: Microrelays First Edition Photography - Illuminants for Sensitometry - Specifications for Daylight,Incandescent Tungsten and Printer Second Edition Steel Cord Conveyor Belts - Methods for the Determination of Total Thickness and Cover Thickness Fourth Edition Road Vehicles - Retro-Reflective Registration Plates for Motor Vehicles and Trailers - Specification First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO

7592 7593 7597 7598 7599 7606 7607 7608 7609

ISO

7611

ISO

7612

ISO ISO ISO ISO

7616 7617-1 7617-2 7617-3

ISO

7619-1

ISO

7619-2

ISO

7622-1

ISO ISO ISO

7622-2 7623 7624

ISO

7625

ISO

7626-1

ISO

7626-2

ISO

7626-5

Calibrated Round Steel Link Lifting Chains - Guidelines to Proper Use and Maintenance First Edition Chain Slings Assembled by Methods Other Than Welding - Grade T(8) First Edition Forged Steel Lifting Hooks with Point and Eye for Use with Steel Chains of Grade T(8) First Edition Stainless Steel Tubes Suitable for Screwing in Accordance with ISO 7-1 Second Edition Anodizing of Aluminium and Its Alloys - General Specifications for Anodic Oxide Coatings on Aluminium First Edition Shipbuilding - Inland Navigation Vessels - Draught Scales First Edition Shipbuilding - Inland Navigation - Multi-Bucket Dredgers - Scale of Bucket Capacities First Edition Shipbuilding - Inland Navigation - Couplings for Disposal of Oily Mixture and Sewage Water First Edition Essential Oils - Analysis by Gas Chromatography on Capillary Columns - General Method First Edition Oils of Lemon and Petitgrain Citronnier, and Oil of Lime Obtained by a Mechanical Process - Determination of Citral (Neral + Geranial) Content - Gas Chromatographic Method on Capillary Columns First Edition Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems Mounting dimensions Third Edition Cellular Plastics, Rigid - Determination of Compressive Creep Under Specified Load and Temperature Conditions First Edition Plastics-Coated Fabrics for Upholstery - Part 1: Specification for PVC-Coated Knitted Fabrics Third Edition Plastics-Coated Fabrics for Upholstery - Part 2: Specification for PVC-Coated Woven Fabrics Third Edition Plastics-Coated Fabrics for Upholstery - Part 3: Specification for Polyurethane-Coated Woven Fabrics First Edition Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) First Edition; Together with ISO 7619-2:2004 Replaces ISO 7619:1997 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method First Edition; Together with ISO 7619-1:2004 Replaces ISO 7619:1997 Steel Cord Conveyor Belts - Longitudinal Traction Test - Part 1: Measurement of Elongation First Edition; (CEN EN ISO 7622-1: 1995) Steel Cord Conveyor Belts - Longitudinal Traction Test - Part 2: Measurement of Tensile Strength First Edition; (CEN EN ISO 7622-2: 1995) Steel Cord Conveyor Belts - Cord-to-Coating Bond Test - Initial Test and After Thermal Treatment Second Edition Petroleum Products and Lubricants - Inhibited Mineral Turbine Oils - Determination of Oxidation Stability First Edition Sintered metal materials, excluding hardmetals Preparation of samples for chemical analysis for determination of carbon content Second Edition Vibration and Shock - Experimental Determination of Mechanical Mobility - Part 1: Basic Definitions and Transducers First Edition Vibration and Shock - Experimental Determination of Mechanical Mobility - Part 2: Measurements Using Single-Point Translation Excitation with an Attached Vibration Exciter First Edition Vibration and Shock - Experimental Determination of Mechanical Mobility - Part 5: Measurements Using Impact Excitation with an Exciter Which Is Not Attached to the Structure First Edition

ISO

7627-1

ISO

7627-2

ISO

7627-3

ISO

7627-4

ISO

7627-5

ISO ISO

7627-6 7628-1

ISO ISO

7628-2 7629

ISO

7630

ISO

7631

ISO

7632

ISO

7633

ISO

7634

ISO

7635

ISO

7637-1

ISO

7637-2

ISO

7637-3

Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 1: General Requirements First Edition; (CEN EN 27627-1: 1993) Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 2: Determination of Calcium, Potassium, Magnesium and Sodium in Contents from 0,001 to 0,02 % (m/m) First Edition; (CEN EN 27627-2: 1993) Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 3: Determination of Cobalt, Iron, Manganese and Nickel in Contents from 0,01 to 0,5 % (m/m) First Edition; (CEN EN 27627-3: 1993) Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 4: Determination of Molybdenum, Titanium and Vanadium in Contents from 0,01 to 0,5 % (m/m) First Edition; (CEN EN 27627-4: 1993) Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 5: Determination of Cobalt, Iron, Manganese, Molybdenum, Nickel, Titanium and Vanadium in Contents from 0,5 to 2 % (m/m) First Edition; (CEN EN 27627-5: 1993) Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 6: Determination of Chromium in Contents from 0,01 to 2 % (m/m) First Edition; (CEN EN 27627-6: 1993) Road Vehicles - Thermoplastic Tubing for Air Braking Systems - Part 1: Dimensions and Marking Second Edition Road Vehicles - Thermoplastics Tubing for Air Braking Systems - Part 2: Mounting on Vehicle and Test Methods First Edition; Technical Corrigendum 1: 03-01-1999 Road Vehicles - Brake Linings - Disc Brake Pads - Evaluation of Surface and Material Flaws After Testing First Edition Road Vehicles - Elastomeric O-Rings for Hydraulic Drum Brake Wheel Cylinders Using a Petroleum Base Hydraulic Brake Fluid (Service Temperature 120 Degrees Celsius Max.) First Edition Road Vehicles - Elastomeric Cups and Seals for Cylinders for Hydraulic Braking Systems Using a Petroleum Base Hydraulic Brake Fluid (Service Temperature 120 Degrees Celsius Max.) First Edition Road Vehicles - Elastomeric Seals for Hydraulic Disc Brake Cylinders Using a Petroleum Base Hydraulic Brake Fluid (Service Temperature 120 Degrees Celsius Max.) First Edition Road Vehicles - Elastomeric Boots for Drum Type Hydraulic Brake Wheel Cylinders Using a Petroleum Base Hydraulic Brake Fluid (Service Temperature 120 Degrees Celsius Max.) First Edition Road vehicles ù Compressed air braking systems for towed vehicles including those with electronic braking control functions ù Test procedures Third Edition Road vehicles Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions Test procedures Third Edition Road Vehicles - Electrical Disturbance from Conduction and Coupling - Part 1: Definitions and General Considerations Second Edition Road Vehicles - Electrical Disturbance by Conduction and Coupling - Part 2: Commercial Vehicles with Nominal 24 V Supply Voltage Electrical Transient Conduction Along Supply Lines Only First Edition Second Edition Road vehicles ù Electrical disturbances from conduction and coupling ù Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines Second Edition

ISO

7638-1

ISO ISO

7638-2 7639

ISO

7641-1

ISO

7642

ISO ISO ISO ISO ISO

7643 7646 7647 7648 7649

ISO ISO

7650 7651

ISO ISO ISO ISO

7653 7654 7656 7660

ISO ISO ISO ISO ISO

7661 7662 7663 7664 7665

ISO

7668

Road vehicles Connectors for the electrical connection of towing and towed vehicles Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage Second Edition; This Standard Together with ISO 7638-2 Replaces ISO 7638 Road vehicles Connectors for the electrical connection of towing and towed vehicles Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage Second Edition; Together with ISO 7638-1, it Cancels and Replaces ISO 7638: 1985 Road Vehicles - Diagnostic Systems - Graphical Symbols First Edition Road Vehicles - Caravans and Light Trailers - Calculation of the Mechanical Strength of the Drawbar - Part 1: Steel Drawbars First Edition Caravans and Light Trailers - Trailers of Categories O1 and O2 with Overrun Brakes - Inertia Bench Test Methods for Brakes Second Edition Caravans and Light Trailers - Trailers of Categories O1 and O2 with Overrun Brakes - Linear Bench Test Methods for Brake Controls Second Edition Commercial Vehicles and Buses - Gearbox Flanges - Type A First Edition Commercial Vehicles and Buses - Gearbox Flanges - Type S First Edition Flywheel Housings for Reciprocating Internal Combustion Engines - Nominal Dimensions and Tolerances First Edition Clutch Housings for Reciprocating Internal Combustion Engines - Nominal Dimensions and Tolerances First Edition Commercial Vehicles and Buses - Mounting Dimensions for Starter Motors of Types 1, 2, 3 and 4 First Edition; Amendment 1:08-152001 Commercial Vehicles and Buses - Mounting Dimensions for Alternators of Types 1, 2 and 3 First Edition Road Vehicles - Commercial Vehicles - Couplings Between Power Take-Offs (PTO) and Ancillary Driven Units First Edition; (Corrected and Reprinted - 1986) Road Vehicles - Spin-On Fuel Filters for Diesel Engines - Mounting and Connecting Dimensions Third Edition Commercial Road Vehicles - Dimensional Codes First Edition Essential Oils - Determination of Ester Value of Oils Containing Difficult-to-Saponify Esters First Edition Aerospace - Fluid Systems - Clamp Blocks for Tube Lines Having Axial Alignment - Design Standard and Qualification Testing Metric Series First Edition Rubber and Plastics Hoses - Determination of Abrasion of Lining First Edition CEN EN ISO 7662: 1996 Halogenated isobutene-isoprene rubber (BIIR and CIIR) Evaluation procedures Fourth Edition Rubber, Raw Natural and Synthetic - General Guidance on Storage First Edition; Replaces ISO TR 7664 Information Processing - File Structure and Labelling of Flexible Disk Cartridges for Information Interchange First Edition Anodized Aluminium and Aluminium Alloys - Measurement of Specular Reflectance and Specular Gloss at Angles of 20 Degrees, 45 Degrees, 60 Degrees or 85 Degrees First Edition

ISO

7671

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polypropylene (PP) Second Edition

Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Chlorinated Poly(Vinyl Chloride) (PVC-C) Second Edition Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Acrylonitrile-butadiene-styrene (ABS) Second Edition Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Creep Factor under Dry Conditions First Edition Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of Initial Specific Ring Stiffness First Edition Plastics pipes and fittings - Determination of opacity Second Edition

ISO

7675

ISO

7682

ISO

7684

ISO ISO

7685 7686

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

7689 7692 7693 7698 7700-1 7700-2 7701 7702 7703 7704 7707 7708 7711-1 7711-2 7712 7713 7714

Aerospace - Alloy Steel Bolts with Strength Classification 1 100 MPa and MJ Threads - Procurement Specification First Edition Ferrotitanium - Determination of Titanium Content - Titrimetric Method First Edition Ferrotungsten - Determination of Tungsten Content - Cinchonine Gravimetric Method First Edition Cereals, Pulses and Derived Products - Enumeration of Bacteria, Yeasts and Moulds First Edition Check of the Calibration of Moisture Meters - Part 1: Moisture Meters for Cereals First Edition Check of the Calibration of Moisture Meters - Part 2: Moisture Meters for Oilseeds First Edition Dried Apples - Specification and Test Methods Second Edition Dried Pears - Specification and Test Methods Second Edition; Technical Corrigendum 1 02/01/2001 Dried Peaches - Specification and Test Methods Second Edition; Technical Corrigendum 1 02/01/2001 Water Quality - Evaluation of Membrane Filters Used for Microbiological Analyses First Edition Commercial Road Vehicles - Connections for Rear-Mounted Power Take-Offs (PTO) First Edition Air Quality - Particle Size Fraction Definitions for Health-Related Sampling First Edition Dental Rotary Instruments - Diamond Instruments - Part 1: Dimensions, Requirements, Marking and Packaging First Edition Dental Rotary Instruments - Diamond Instruments - Part 2: Discs First Edition; (CEN EN ISO 7711-2: 1995) Laboratory Glassware - Disposable Pasteur Pipettes First Edition Laboratory Glassware - Disposable Serological Pipettes First Edition Agricultural Irrigation Equipment - Volumetric Valves - General Requirements and Test Methods Third Edition

ISO ISO ISO

7715 7716 7717

ISO ISO ISO ISO

7718 7719 7720 7721

Air Cargo Equipment - Ground Handling and Transport Systems for Unit Load Devices - Minimum Requirements First Edition Air Cargo Equipment - Unit Load Devices Transport Vehicle (UTV) - Functional Requirements First Edition Aircraft - Four-Wheel-Drive Tow Tractors - Performance Requirements Factors for Design First Edition Aircraft Main-deck passenger doors Interface requirements for connection with passenger-boarding bridge or transfer vehicle Second Edition Prevailing Torque Type All-Metal Hexagon Nuts, Style 1 - Property Classes 5, 8 and 10 Second Edition Prevailing Torque Type All-Metal Hexagon Nuts, Style 2 - Property Class 9 Second Edition Countersunk Head Screws - Head Configuration and Gauging First Edition

ISO

7721-2

ISO

7722

ISO ISO ISO ISO

7723 7724-1 7724-2 7724-3

ISO ISO

7725 7726

ISO

7727

ISO

7728

ISO

7729

ISO ISO ISO ISO

7730 7731 7736 7737

ISO

7738

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

7739 7740 7741 7742 7743 7745 7747 7749-1 7750-1 7750-2

Countersunk Flat Head Screws - Part 2: Penetration Depth of Cross Recesses First Edition; (CEN EN ISO 7721-2: 1990) Aluminium Alloy Castings Produced by Gravity, Sand, or Chill Casting, or by Related Processes - General Conditions for Inspection and Delivery First Edition Manganese Ores and Concentrates - Determination of Titanium Content - 4,4┤ -Diantipyrylmethane Spectrometric Method First Edition Paints and Varnishes - Colorimetry - Part 1: Principles First Edition Paints and Varnishes - Colorimetry - Part 2: Colour Measurement First Edition Paints and Varnishes - Colorimetry - Part 3: Calculation of Colour Differences First Edition Rubber and Rubber Products - Determination of Bromine and Chlorine Content - Oxygen Flask Combustion Technique First Edition Ergonomics of the Thermal Environment - Instruments for Measuring Physical Quantities Second Edition Joints in Building - Principles for Jointing of Building Components - Accommodation of Dimensional Deviations During Construction First Edition Typical Horizontal Joints Between an External Wall of Prefabricated Ordinary Concrete Components and a Concrete Floor Properties, Characteristics and Classification Criteria First Edition Typical Vertical Joints Between Two Prefabricated Ordinary Concrete External Wall Components - Properties, Characteristics and Classification Criteria First Edition Ergonomics of the thermal environment Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria Third Edition Ergonomics Danger signals for public and work areas Auditory danger signals Second Edition Road Vehicles - Car Radio for Front Installation - Installation Space Including Connections First Edition Tolerances for Building - Presentation of Dimensional Accuracy Data First Edition Assembly Tools for Screws and Nuts - Combination Wrenches - Lengths of Wrenches and Maximum Thickness of Heads Third Edition Cinematography - Two-Track Photographic Sound Records on 16 mm Motion-Picture Prints - Positions and Width Dimensions First Edition Instruments for Surgery - Scalpels with Detachable Blades - Fitting Dimensions First Edition Instruments for Surgery - Scissors and Shears - General Requirements and Test Methods First Edition Solid Fertilizers - Reduction of Samples First Edition Rubber, vulcanized or thermoplastic Determination of compression stressstrain properties Second Edition Hydraulic Fluid Power - Fire-Resistant (FR) Fluids - Guidelines for Use First Edition Road Vehicles - Filter Elements for Full Flow Oil Filters - Dimensions First Edition Agricultural Irrigation Equipment - Rotating Sprinklers - Part 1: Design and Operational Requirements Second Edition Commercial Vehicles - Dimensions of Air Filter Elements - Part 1: Types A and B Second Edition Road Vehicles - Air Filter Elements for Commercial Vehicles - Dimensions - Part 2: Types C and D First Edition

ISO ISO

7751 7752-1

ISO ISO ISO

7752-2 7752-3 7752-4

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

7752-5 7753 7755-1 7755-2 7755-3 7755-4 7755-5 7755-6 7755-7 7755-8 7755-9 7755-10 7755-11 7755-12

ISO ISO ISO ISO

7759 7760 7761 7764

ISO ISO

7765-1 7765-2

ISO ISO ISO ISO ISO

7766 7768 7769 7770 7771

Rubber and Plastics Hoses and Hose Assemblies - Ratios of Proof and Burst Pressure to Design Working Pressure Second Edition Lifting Appliances - Controls - Layout and Characteristics - Part 1: General Principles First Edition Lifting Appliances - Controls - Layout and Characteristics - Part 2: Basic Arrangement and Requirements for Mobile Cranes First Edition; Addendum 1: 1986 Cranes - Controls - Layout and Characteristics - Part 3: Tower Cranes First Edition Cranes - Controls - Layout and Characteristics - Part 4: Jib Cranes First Edition Lifting Appliances - Controls - Layout and Characteristics - Part 5: Overhead Travelling Cranes and Portal Bridge Cranes First Edition Nuclear Energy - Performance and Testing Requirements for Criticality Detection and Alarm Systems First Edition Hardmetal Burrs - Part 1: General Specifications First Edition Hardmetal Burrs - Part 2: Cylindrical Burrs (Style A) First Edition Hardmetal Burrs - Part 3: Cylindrical Round- (Ball-) Nose Burrs (Style C) First Edition Hardmetal Burrs - Part 4: Spherical Burrs (Style D) First Edition Hardmetal Burrs - Part 5: Oval Burrs (Style E) First Edition Hardmetal Burrs - Part 6: Arch Round- (Ball-) Nose Burrs (Style F) First Edition Hardmetal Burrs - Part 7: Arch Pointed-Nose Burrs (Style G) First Edition Hardmetal Burrs - Part 8: Flame Burrs (Style H) First Edition Hardmetal Burrs - Part 9: 60 Degrees and 90 Degrees Cone Burrs (Styles J and K) First Edition Hardmetal Burrs - Part 10: Conical Round- (Ball-) Nose Burrs (Style L) First Edition Hardmetal Burrs - Part 11: Conical Pointed-Nose Burrs (Style M) First Edition Hardmetal Burrs - Part 12: Inverted Cone Burrs (Style N) First Edition Anodizing of Aluminium and Its Alloys - Measurement of Reflectivity Characteristics of Aluminium Surfaces Using Abridged Goniophotometer or Goniophotometer First Edition Photography - Processing Waste - Determination of Hydroquinone Second Edition Micrographics Single-core cartridge for 16 mm processed microfilm Dimensions and operational constraints First Edition Iron ores Preparation of predried test samples for chemical analysis Second Edition Plastics Film and Sheeting - Determination of Impact Resistance by the Free-Falling Dart Method Part 1: Staircase Methods First Edition Plastics Film and Sheeting - Determination of Impact Resistance by the Free-Falling Dart Method First Edition Processing photographic wastes Analysis of cyanides Determination of hexacyanoferrate(ll) and hexacyanoferrate(lll) by spectrometry First Edition; Replaces ISO 7766-1 Textiles Test Method for Assessing the Smoothness Appearance of Fabrics After Cleansing Second Edition Textiles Test method for assessing the appearance of creases in fabrics after cleansing Third Edition Textiles Test method for assessing the smoothness appearance of seams in fabrics after cleansing Second Edition Textiles - Determination of Dimensional Changes of Fabrics Induced by Cold-Water Immersion First Edition

ISO

7773

ISO ISO

7776 7778

ISO

7779

ISO ISO

7780 7781

ISO

7783-1

ISO

7783-2

ISO

7784-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

7784-2 7784-3 7785-1 7785-2 7786 7787-1 7787-2 7787-3 7787-4 7788

ISO

7789

ISO

7790

ISO

7792-1

ISO ISO

7792-2 7794

Magnesium Alloys - Round Bars and Tubes - Dimensional Tolerances First Edition Information Technology - Telecommunications and Information Exchange between Systems - High-Level Data Link Control Procedures - Description of the X.25 LAPB-Compatible DTE Data Link Procedures Second Edition; Amendment 1-11/15/1996 Steel Plate with Specified Through-Thickness Characteristics First Edition Acoustics - Measurement of Airborne Noise Emitted by Information Technology and Telecommunications Equipment Second Edition; Amendment 1: 3/01/2003 Rubber and Rubber Latices - Determination of Manganese Content - Sodium Periodate Photometric Methods Second Edition Styrene-Butadiene Rubber, Raw - Determination of Soap and Organic-Acid Content Third Edition Paints and Varnishes - Determination of Water-Vapour Transmission Rate - Part 1: Dish Method for Free Films First Edition; Corrigendum 1-1998 Paints and Varnishes - Coating Materials and Coating Systems for Exterior Masonry and Concrete - Part 2: Determination and Classification of Water-Vapour Transmission Rate (Permeability) First Edition Paints and Varnishes - Determination of Resistance to Abrasion - Part 1: Rotating Abrasive-Paper-Covered Wheel Method First Edition Paints and Varnishes - Determination of Resistance to Abrasion - Part 2: Rotating Abrasive Rubber Wheel Method First Edition Paints and Varnishes - Determination of Resistance to Abrasion - Part 3: Reciprocating Test Panel Method First Edition Dental Handpieces - Part 1: High-Speed Air-Turbine Handpieces Second Edition Dental Handpieces - Part 2: Straight and Geared Angle Handpieces Second Edition Dental Rotary Instruments - Laboratory Abrasive Instruments Third Edition Dental Rotary Instruments - Cutters Part 1: Steel Laboratory Cutters First Edition; (CAN/CSA-Z349.35.1-M92) Dental Rotary Instruments - Cutters - Part 2: Carbide Laboratory Cutters Fourth Edition Dental Rotary Instruments - Cutters - Part 3: Carbide Laboratory Cutters for Milling Machines First Edition Dental Rotary Instruments - Cutters - Part 4: Miniature Carbide Laboratory Cutters First Edition Steel - Surface Finish of Hot-Rolled Plates and Wide Flats - Delivery Requirements First Edition Hydraulic Fluid Power - Two, Three- and Four-Port Screw-In Cartridge Valves - Cavities First Edition; Technical Corrigendum 1: 0215-1999 Hydraulic Fluid Power - Four-Port Modular Stack Valves and Four-Port Directional Control Valves, Sizes 02, 03 and 05 - Clamping Dimensions Second Edition Plastics - Thermoplastic Polyester (TP) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Third Edition Plastics - Thermoplastic Polyester (TP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties Second Edition Cross-Country Skis - Ski Binding Screws - Requirements Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

7795 7796 7797 7798 7799 7800 7801 7802 7803 7804 7805-1 7805-2 7806

ISO ISO ISO ISO

7807 7808 7810 7811-1

ISO

7811-2

ISO ISO ISO ISO

7811-6 7811-7 7812-1 7813

ISO ISO

7816-1 AMD 1 7816-1

ISO ISO ISO

7816-3 7816-4 7816-5

ISO ISO

7816-6 CORR 1 7816-6

Cross-Country Skis - Ski Binding Screws - Test Methods Second Edition Skis - Geometry - Measuring Conditions First Edition Cross-Country Skis - Determination of Breaking Load and Deflection at Break with Quasistatic Load First Edition Cross-Country Skis - Determination of Fatigue Indexes - Cyclic Loading Test First Edition Metallic Materials - Sheet and Strip 3 mm Thick or Less - Reverse Bend Test First Edition Metallic Materials - Wire - Simple Torsion Test Second Edition Metallic Materials - Wire - Reverse Bend Test First Edition; Replaces ISO 144: 1973 Metallic Materials - Wire - Wrapping Test First Edition; Replaces ISO R 145: 1960 Commercial Road Vehicles - Steering Ball Joints First Edition Commercial Road Vehicles - Side Openings for Truck Power Take-Offs First Edition Industrial Plate Screens - Part 1: Thickness of 3 mm and Above First Edition Industrial Plate Screens - Part 2: Thickness Below 3 mm First Edition Industrial Plate Screens - Codification for Designating Perforations First Edition Air Distribution - Straight Circular Sheet Metal Ducts with a Lock Type Spiral Seam and Straight Rectangular Sheet Metal Ducts Dimensions First Edition Plastics - Thermosetting Moulding Materials - Determination of Transfer Flow First Edition Identification cards Physical characteristics Third Edition Identification Cards - Recording Technique - Part 1: Embossing Third Edition Identification Cards - Recording Technique - Part 2: Magnetic Stripe - Low Coercivity Third Edition; Cancels and Replaces ISO/IEC 7811-2:1995, ISO/IEC 7811-4:1995, ISO/IEC 7811-5:1995 Identification cards - Recording technique - Part 6: Magnetic stripe - High coercivity Second Edition; Cancels and Replaces ISO/IEC 7811-6:1996 and ISO/IEC 7811-4 thru 5:1995; Amendment 1: 10/01/2005 Identification cards Recording technique Part 7: Magnetic stripe High coercivity, high density First Edition Identification cards Identification of issuers Part 1: Numbering system Third Edition Information technology Identification cards Financial transaction cards Sixth Edition Identification Cards - Integrated Circuit(s) Cards with Contacts - Part 1: Physical Characteristics Amendment 1: Maximum Height of the IC Contact Surface Identification Cards - Integrated Circuit(s) Cards with Contacts - Part 1: Physical Characteristics First Edition dentification cards Integrated circuit cards Part 3: Cards with contacts Electrical interface and transmission protocols Third Edition Identification cards Integrated circuit cards Part 4: Organization, security and commands for interchange Second Edition Identification Cards - Integrated Circuit Cards - Part 5: Registration of application providers Second Edition Identification cards ù Integrated circuit cards ù Part 6: Interindustry data elements for interchange TECHNICAL CORRIGENDUM 1 Second Edition Identification cards ù Integrated circuit cards ù Part 6: Interindustry data elements for interchange Second Edition

ISO ISO ISO

7816-7 7816-8 7816-9

ISO ISO

7816-10 7816-11

ISO

7816-12

ISO

7816-13

ISO ISO

7816-15 CORR 1 7816-15

ISO

7816-15 FDAM 1

ISO ISO

7822 7823-1

ISO

7823-2

ISO ISO ISO

7823-3 7824 7825

ISO

7827

ISO

7828

ISO

7829

ISO

7831

ISO ISO

7832 7834

Indentification Cards - Integrated Circuit(s) Cards with Contacts - Part 7: Interindustry Commands for Structured Card Query Language (SCQL) First Edition Identification cards Integrated circuit cards Part 8: Commands for security operations Second Edition Identification cards Integrated circuit cards Part 9: Commands for card management Second Edition Indentification Cards - Integrated Circuit(s) Cards with Contacts - Part 10: Electronic Signals and Answer to Reset for Synchronous Cards First Edition Identification cards Integrated circuit cards Part 11: Personal verification through biometric methods First Edition Identification cards Integrated circuit cards Part 12: Cards with contacts USB electrical interface and operating procedures First Edition Identification cards ù Integrated circuit cards ù Part 13: Commands for application management in a multi-application environment First Edition Identification cards ù Integrated circuit cards with contacts ù Part 15: Cryptographic information application TECHNICAL CORRIGENDUM 1 First Edition Identification cards ù Integrated circuit cards with contacts ù Part 15: Cryptographic information application First Edition Identification cards - Integrated circuit cards - Part 15: Cryptographic information application AMENDMENT 1: Examples of the use of the cryptographic information application First Edition Textile Glass Reinforced Plastics - Determination of Void Content - Loss on Ignition, Mechanical Disintegration and Statistical Counting Methods First Edition Plastics - Poly(Methyl Methacrylate) Sheets - Types, Dimensions and Characteristics - Part 1: Cast Sheets Fourth Edition Plastics - Poly(Methyl Methacrylate) Sheets - Types, Dimensions and Characteristics - Part 2: Extruded Sheets Third Edition Plastics ù Poly(methyl methacrylate) sheets ù Types, dimensions and characteristics ù Part 3: Continuous cast sheets Second Edition Shipbuilding and Marine Structures - Lubrication Nipples - Cone and Flat Types First Edition Shipbuilding - Deck Machinery - General Requirements First Edition Water Quality - Evaluation in an Aqueous Medium of theUltimate" Aerobic Biodegradability of Organic Compounds - Method by Analysis of Dissolved Organic Carbon (DOC) Second Edition; (CEN EN ISO 7827: 1995)" Water Quality - Methods of Biological Sampling - Guidance on Handnet Sampling of Aquatic Benthic Macro-Invertebrates First Edition; (CEN EN 27828: 1194) Photography - Black-and-White Aerial Camera Films - Determination of ISO Speed and Average Gradient First Edition; Technical Corrigendum 1:06-01-2001 Cinematography - A-Chain Frequency Response for Reproduction of 35 mm Photographic Sound - Reproduction Characteristics First Edition Cinematography - Photoelectric Output Factor of Photographic-Type Audio-Level Test Films - Measurement and Calibration First Edition Iron Ores - Determination of Arsenic Content - Molybdenum Blue Spectrophotometric Method First Edition

ISO ISO

7837 7838

Fertilizers - Determination of Bulk Density (Loose) of Fine-Grained Fertilizers Second Edition Shipbuilding - Shiplines - Formats and Data Organization First Edition Textile Machinery and Accessories - Knitting Machines - Vocabulary and classification MatÚriel pour l'industrie textile Machines Ó tricoter Vocabulaire et classification Second Edition Small Craft - Fire-Resistant Fuel Hoses Third Edition Automatic Steam Traps - Determination of Steam Loss - Test Methods First Edition Automatic Steam Traps - Determination of Discharge Capacity - Test Methods First Edition Grooved Vertical Joints with Connecting Bars and Concrete Infill Between Large Reinforced Concrete Panels - Laboratory Mechanical Tests - Effect of Tangential Loading First Edition Horizontal Joints Between Load-Bearing Walls and Concrete Floors - Laboratory Mechanical Tests - Effect of Vertical Loading and of Moments Transmitted by the Floors First Edition

ISO ISO ISO ISO

7839 7840 7841 7842

ISO

7844

ISO

7845

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

7847 7850 7851 7852 7854 7857-1 7857-3 7859 7860 7862 7863 7864 7866

ISO

7867-1

ISO ISO ISO

7867-2 7870-1 7873

ISO

7875-1

Tyres and rims (metric series) for agricultural tractors and machines - Part 2: Service description and load ratings Second Edition Control charts ù Part 1: General guidelines First Edition [Cancelled: ISO 7870] Control Charts for Arithmetic Average with Warning Limits First Edition Water Quality - Determination of Surfactants - Part 1: Determination of Anionic Surfactants by Measurement of the Methylene Blue Index (MBAS) Second Edition; Corrigendun 1, 7/1/2003

ISO

7875-2

Water Quality - Determination of Surfactants - Part 2: Determination of Non-Ionic Surfactants Using Dragendorff Reagent First Edition

Animal and Vegetable Fats and Oils - Determination of Polyunsaturated Fatty Acids with a Cis,Cis 1,4-diene Structure First Edition Cellular Plastics, Rigid - Determination of Compressive Creep First Edition Fertilizers and Soil Conditioners - Classification First Edition Earth-Moving Machinery - Plough Bolt Heads - Shapes and Dimensions (Excluding Thread Dimensions) First Edition Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Damage by Flexing Second Edition Intra-Uterine Devices - Part 1: Determination of Breaking Force First Edition Intra-Uterine Devices - Part 3: Packaging and Labelling First Edition Mopeds - Fuel Consumption Measurements First Edition Motorcycles - Methods of Measuring Fuel Consumption Second Edition Road vehicles Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions Second Edition Height Setting Micrometers and Riser Blocks First Edition Sterile Hypodermic Needles for Single Use Third Edition; (CEN EN ISO 7864: 1995) Gas Cylinders - Refillable Seamless Aluminium Alloy Gas Cylinders - Design, Construction and Testing First Edition Tyres and Rims (Metric Series) for Agricultural Tractors and Machines - Part 1: Tyre Designation, Dimensions and Marking, and Tyre/Rim Coordination Fourth Edition

ISO

7876-1

ISO ISO

7876-2 7876-3

ISO

7876-4

ISO ISO

7876-5 7879

Fuel Injection Equipment - Vocabulary - Part 1: Fuel Injection Pump Equipement D'Injection De Combustible - Vocabulaire - Partie 1: Pompes D'Injection De Combustible Second Edition; Amendment 1: 05/01/1999 Fuel Injection Equipment - Vocabulary - Part 2: Fuel Injectors Equipement D'Injection De Combustible - Vocabulaire - Partie 2: PorteInjecteurs De Combustible Complets First Edition; Amendment 1: 05/01/1999 Fuel Injection Equipment - Vocabulary - Part 3: Unit Injectors First Edition Fuel Injection Equipment - Vocabulary - Part 4: High-Pressure Pipes and End-Connections ╔quipement d'injection de combustible Vocabulaire Partie 4: Tuyauteries et raccords haute pression Second Edition Fuel injection equipment Vocabulary Part 5: Common rail fuel injection system ╔quipement d'injection de combustible Vocabulaire Partie 5: Syst×me d'injection de combustible Ó rampe commune First Edition Diesel Engines - Cradle-Mounted In-Line Fuel Injection Pumps - Mounting Dimensions Third Edition

ISO ISO

7884-1 7884-2

Glass - Viscosity and Viscometric Fixed Points - Part 1: Principles for Determining Viscosity and Viscometric Fixed Points First Edition Glass - Viscosity and Viscometric Fixed Points - Part 2: Determination of Viscosity by Rotation Viscometers First Edition

ISO ISO

7884-3 7884-4

Glass - Viscosity and Viscometric Fixed Points - Part 3: Determination of Viscosity by Fibre Elongation Viscometer First Edition Glass - Viscosity and Viscometric Fixed Points - Part 4: Determination of Viscosity by Beam Bending First Edition

ISO ISO

7884-5 7884-6

ISO

7884-7

Glass - Viscosity and Viscometric Fixed Points - Part 5: Determination of Working Point by Sinking Bar Viscometer First Edition Glass - Viscosity and Viscometric Fixed Points - Part 6: Determination of Softening Point First Edition Glass - Viscosity and Viscometric Fixed Points - Part 7: Determination of Annealing Point and Strain Point by Beam Bending First Edition

ISO ISO

7884-8 7885

Glass - Viscosity and Viscometric Fixed Points - Part 8: Determination of (Dilatometric) Transformation Temperature First Edition Sterile Dental Injection Needles for Single Use Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO

7886-1 7886-2 7886-3 7886-4 7887 7888 7889 7890-3 7892

ISO

7899-1

Sterile Hypodermic Syringes for Single Use - Part 1: Syringes for Manual Use First Edition; Replaces ISO 7886; Corrigendum 1-1995 Sterile Hypodermic Syringes for Single Use - Part 2: Syringes for Use with Power-Driven Syringe Pumps First Edition Sterile hypodermic syringes for single use - Part 3: Auto-disable syringes for fixed-dose immunization First Edition Sterile hypodermic syringes for single use Part 4: Syringes with re-use prevention feature First Edition Water Quality - Examination and Determination of Colour Second Edition; (CEN EN ISO 7887: 1994) Water Quality - Determination of Electrical Conductivity First Edition; (CEN EN 27888: 1993) Yogur - Enumeration of Characteristic Microorganisms - Colony-Count Technique at 37 Degrees Celcius First Edition Water Quality - Determination of Nitrate - Part 3: Spectrometric Method Using Sulfosalicylic Acid First Edition Vertical Building Elements - Impact Resistance Tests - Impact Bodies and General Test Procedures First Edition Water Quality - Detection and Enumeration of Intestinal Enterococci in Surface and Waste Water - Part 1: Miniaturized Method (Most Probable Number) by Inoculation in Liquid Medium Corrigendum 1: 2000; Second Edition

ISO ISO

7899-2 7900

ISO

7902-1

ISO

7902-2

ISO ISO ISO

7902-3 7904-1 7904-2

ISO

7905-1

ISO

7905-2

ISO

7905-3

ISO ISO ISO ISO ISO ISO ISO ISO ISO

7905-4 7907 7908 7910 7911 7913 7914 7915 7918

ISO

7919-1

ISO

7919-2

ISO

7919-3

ISO

7919-4

Water Quality - Detection and Enumeration of Intestinal Enterococci - Part 2: Membrane Filtration Method Second Edition Steel wire and wire products for fences Zinc- and zinc-alloy-coated steel barbed wire Second Edition Hydrodynamic Plain Journal Bearings under Steady-State Conditions - Circular Cylindrical Bearings - Part 1: Calculation Procedure First Edition Hydrodynamic Plain Journal Bearings under Steady-State Conditions - Circular Cylindrical Bearings - Part 2: Functions Used in the Calculation Procedure First Edition Hydrodynamic Plain Journal Bearings under Steady-State Conditions - Circular Cylindrical Bearings - Part 3: Permissible Operational Parameters First Edition Plain Bearings - Symbols - Part 1: Basic Symbols First Edition Plain Bearings - Symbols - Part 2: Applications First Edition Plain Bearings - Bearing Fatigue - Part 1: Plain Bearings in Test Rigs and in Applications Under Conditions of Hydrodynamic Lubrication First Edition Plain Bearings - Bearing Fatigue - Part 2: Test with a Cylindrical Specimen of a Metallic Bearing Material First Edition; (Corrected and Reprinted - 1996) Plain Bearings - Bearing Fatigue - Part 3: Test on Plain Strips of a Metallic Multilayer Bearing Material First Edition; (Corrected and Reprinted - 1996) Plain Bearings - Bearing Fatigue - Part 4: Test on Half-Bearings of a Metallic Multilayer Bearing Material First Edition; (Corrected and Reprinted - 1996) Carob - Specification First Edition Dried Sweet Cherries - Specification First Edition Dried Mulberries - Specification First Edition Unshelled Pine Nuts - Specification First Edition Aerospace - Bolts and Screws, Metric - Tolerances of Form and Position Second Edition Forestry Machinery - Portable Chain-Saws - Minimum Handle Clearance and Sizes Third Edition Forestry Machinery - Portable Chain-Saws - Determination of Handle Strength Second Edition Forestry Machinery - Portable Brush-Cutters and Grass-Trimmers - Cutting Attachment Guard Dimensions Second Edition Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 1: General Guidelines Second Edition Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Rotating Shafts - Part 2: Land-Based Steam Turbines and Generators in Excess of 50 MW with Normal Operating Speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min Second Edition Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 3: Coupled Industrial Machines First Edition Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 4: Gas Turbine Sets First Edition

ISO ISO ISO ISO ISO

7919-5 7920 7922 7925 7926

ISO ISO ISO

7927-1 7928-1 7928-2

ISO ISO

7929 7931

ISO

7932

ISO

7933

ISO

7934

ISO

7935

ISO

7936

ISO ISO ISO ISO

7937 7938 7939 7941

ISO

7942-1

ISO

7942-2

ISO

7942-3

ISO

7942-4

Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 5: Machine sets in hydraulic power generating and pumping plants Second Edition Sweet Cherries and Sour Cherries - Guide to Cold Storage and Refrigerated Transport First Edition Leeks - Guide to Cold Storage and Refrigerated Transport First Edition Dried Oregano (Origanum Vulgare L.) - Whole or Ground Leaves - Specification Second Edition Dehydrated Tarragon (Artemisia Dracunculus Linnaeus) - Specification First Edition Fennel Seed, Whole or Ground (Powdered) - Part 1: Bitter Fennel Seed (Foeniculum Vulgare P. Miller Var. Vulgare) - Specification First Edition Savory - Specification - Part 1: Winter Savory (Satureja Montana Linnaeus) First Edition Savory - Specification - Part 2: Summer Savory (Satureja Hortensis Linnaeus) First Edition Information Processing - Magnetic Disk for Data Storage Devices - 83 000 Flux Transitions per Track, 130 mm (5.12 in) Outer Diameter, 40 mm (1.57 in) Inner Diameter First Edition Insulation Caps and Bushes for Resistance Welding Equipment First Edition Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of presumptive Bacillus cereus Colony-count technique at 30 ░C Third Edition Ergonomics of the thermal environment Analytical determination and interpretation of heat stress using calculation of the predicted heat strain Second Edition Stationary Source Emissions - Determination of the Mass Concentration of Sulfur Dioxide - Hydrogen Peroxide/Barium Perchlorate/Thorin Method First Edition; Amendment 1-7/1/1998 Stationary Source Emissions - Determination of the Mass Concentration of Sulphur Dioxide - Performance Characteristics of Automated Measuring Methods First Edition Hard Coal - Determination and Presentation of Float and Sink Characteristics - General Directions for Apparatus and Procedures First Edition Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for Enumeration of Clostridium Perfringens - Colony-Count Technique Third Edition Aircraft - Ball Bearings for Control Cable Pulleys - Dimensions and Loads First Edition Aircraft - Non-Metallic Pulleys with Ball Bearings for Control Cables - Dimensions and Loads First Edition Commercial Propane and Butane - Analysis by Gas Chromatography First Edition Information Technology - Computer Graphics and Image Processing - Graphical Kernel System (GKS) - Part 1: Functional Description Second Edition; CEN ISO/IEC 7942-1: 1995 Information Technology - Computer Graphics and Image Processing - Graphical Kernel System (GKS) - Part 2: NDC Metafile First Edition Information Technology - Computer Graphics and Image Processing - Graphical Kernel Systems (GKS) - Part 3: Audit Trail First Edition Information Technology - Computer Graphics and Image Processing - Graphical Kernel System (GKS) - Part 4: Picture Part Archive First Edition

ISO

7943-1

ISO ISO ISO ISO ISO

7943-2 7943-3 7944 7945 7946

ISO ISO ISO ISO

7947 7948 7949 7950

ISO

7952

ISO

7953

ISO ISO

7954 7957

ISO

7958

ISO ISO ISO ISO ISO ISO ISO

7959 7960 7961 7963 7965-1 7965-2 7966

ISO

7967-1

ISO

7967-2

Photography - Overhead Projectors - Part 1: Projection Stages - Dimensions First Edition ANSI/PIMA IT7.220-1995(R1997) Photography - Overhead Projectors - Part 2: Transparencies and Transparency Frames - Dimensions First Edition; (ANSI IT7.2121989) Photography - Overhead Projectors - Part 3: Film Rolls, Cores and Winders - Dimensions First Edition Optics and Optical Instruments - Reference Wavelengths Second Edition Woodworking Machines - Single Spindle Boring Machines - Nomenclature and Acceptance Conditions First Edition Woodworking Machines - Slot Mortising Machines - Nomenclature and Acceptance Conditions First Edition Woodworking Machines - Two-, Three-and Four-Side Moulding Machines - Nomenclature and Acceptance Conditions First Edition Woodworking Machines - Routing Machines - Nomenclature and Acceptance Conditions First Edition Woodworking Machines - Veneer Pack Edge Shears - Nomenclature and Acceptance Conditions First Edition Woodworking Machines - Single Chain Mortising Machines - Nomenclature and Acceptance Conditions First Edition Fruits, Vegetables and Derived Products - Determination of Copper Content - Method Using Flame Atomic Absorption Spectrometry First Edition Manganese Ores and Concentrates - Determination of Calcium and Magnesium Contents - Flame Atomic Absorption Spectrometric Method First Edition Microbiology - General Guidance for Enumeration of Yeasts and Moulds - Colony Count Technique at 25 Degrees Celsius First Edition; (PNS 579: 1992) Woodworking Machines - Radial Circular Saws - Nomenclature and Acceptance Conditions First Edition Woodworking Machines - Single Blade Stroke Circular Sawing Machines for Lengthwise Cutting of Solid Woods and Panels Nomenclature and Acceptance Conditions First Edition Woodworking Machines - Double Edging Precision Circular Sawing Machines - Nomenclature and Acceptance Conditions First Edition Airborne Noise Emitted by Machine Tools - Operating Conditions for Woodworking Machines First Edition Aerospace - Bolts - Test Methods First Edition Non-destructive testing Ultrasonic testing Specification for calibration block No. 2 Second Edition Packaging - Sacks - Drop Test - Part 1: Paper Sacks First Edition; (CEN EN 27965-1: 1992) Sacks - Drop Test - Part 2: Sacks Made from Thermoplastic Flexible Film First Edition Acceptance Control Charts First Edition Reciprocating internal combustion engines Vocabulary of components and systems Part 1: Structure and external covers Moteurs alternatifs Ó combustion interne Vocabulaire des composants et des syst×mes Partie 1: Structure du moteur et de ses capotages Second Edition Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems - Part 2: Main Running Gear Moteurs Alternatifs A Combustion Interne-Vocabulaire Des Composants Et Des Systemes - Partie 2: Mecanismes Principaux First Edition; Amendment 1 12/01/1999

ISO

7967-3

ISO

7967-4

Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems - Part 3: Valves, Camshaft Drive and Actuating Mechanisms First Edition Reciprocating internal combustion engines Vocabulary of components and systems Part 4: Pressure charging and air/exhaust gas ducting systems Moteurs alternatifs Ó combustion interne Vocabulaire des composants et des syst×mes Partie 4: Compresseur et circuits d'admission et d'Úchappement Second Edition

ISO

7967-5

Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems - Part 5: Cooling Systems Moteurs Alternatifs a Combustion Interne - Vocabulaire des Composants et des Systemes - Partie 5: Systemes de Refroidissement Second Edition

ISO

7967-6

ISO

7967-7 CORR 1

Reciprocating internal combustion engines Vocabulary of components and systems Part 6: Lubricating systems Moteurs alternatifs Ó combustion interne Vocabulaire des composants et des syst×mes Partie 6: Syst×mes de lubrification Second Edition Reciprocating internal combustion engines ù Vocabulary of components and systems ù Part 7: Governing systems TECHNICAL CORRIGENDUM 1 Moteurs alternatifs Ó combustion interne ù Vocabulaire des composants et des syst×mes ù Partie 7: Syst×mes de rÚgulation RECTIFICATIF TECHNIQUE 1 Second Edition

ISO

7967-7

Reciprocating internal combustion engines ù Vocabulary of components and systems ù Part 7: Governing systems Moteurs alternatifs Ó combustion interne ù Vocabulaire des composants et des syst×mes ù Partie 7: Syst×mes de rÚgulation Second Edition

ISO

7967-8

ISO

7967-9

ISO ISO

7969 7970

ISO

7971-1

ISO ISO ISO

7971-2 7973 7975

ISO

7976-1

ISO ISO

7976-2 7980

Reciprocating internal combustion engines Vocabulary of components and systems Part 8: Starting systems Moteurs alternatifs Ó combustion interne Vocabulaire des composants et des syst×mes Partie 8: Syst×mes de dÚmarrage Third Edition Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems - Part 9: Control and Monitoring Systems First Edition Manganese Ores and Concentrates - Determination of Sodium and Potassium Contents - Flame Atomic Absorption Spectrometric Method First Edition Wheat (Triticum Aestivum L.) - Specification Second Edition Cereals Determination of bulk density, called ômass per hectolitreö Part 1: Reference method First Edition; Cancels and Replaces ISO 7970: 1986 Cereals - Determination of Bulk Density, CalledMass per Hectolitre" - Part 2: Routine Method First Edition; (BS 4317: PT 32: 1996) Replaces ISO 7971" Cereals and Milled Cereal Products - Determination of the Viscosity of Flour - Method Using an Amylograph First Edition Passenger Cars - Braking in a Turn - Open-loop Test Method Third Edition Tolerances for Building - Methods of Measurement of Buildings and Building Products - Part 1: Methods and Instruments First Edition Tolerances for Building - Methods of Measurement of Buildings and Building Products - Part 2: Position of Measuring Points First Edition Water Quality - Determination of Calcium and Magnesium - Atomic Absorption Spectrometric Method First Edition

ISO

7981-1

ISO

7981-2

ISO

7982-1

ISO

7983

ISO

7984

ISO ISO ISO

7986 7987 7988

ISO

7989-1

ISO

7989-2

ISO ISO ISO

7990 7991 7992

ISO ISO

7995 7996

ISO ISO ISO

7998 8001 8002

ISO

8003

ISO

8004

ISO

8005

Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Part 1: Determination of six PAH by highperformance thinlayer chromatography with fluorescence detection after liquid-liquid extraction First Edition Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Part 2: Determination of six PAH by highperformance liquid chromatography with fluorescence detection after liquid-liquid extraction First Edition Bank Telecommunication - Funds Transfer Messages - Part 1: Vocabulary and Universal Set of Data Segments and Data Elements for Electronic Funds Transfer Messages Second Edition: Technical Corrigendum 1: 12/15/1999 Woodworking Machines - Single Blade Circular Sawing Machines with Travelling Table - Nomenclature and Acceptance Conditions First Edition Woodworking Machines - Technical Classification of Woodworking Machines and Auxiliary Machines for Woodworking First Edition Hydraulic Fluid Power - Sealing Devices - Standard Test Methods to Assess the Performance of Seals Used in Oil Hydraulic Reciprocating Applications First Edition Woodworking Machines - Turning Lathes - Nomenclature and Acceptance Conditions First Edition Woodworking Machines - Double-End Tenoning Machines - Nomenclature and Acceptance Conditions First Edition Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 1: General principles First Edition; Together with ISO 7989-2, Cancels and Replaces ISO 7989:1988, Steel wire and wire products ù Nonferrous metallic coatings on steel wire ù Part 2: Zinc or zinc-alloy coating First Edition [Superseded: ISO 7989] Manganese Ores and Concentrates - Determination of Total Iron Content - Titrimetric Method After Reduction and Sulfosalicylic Acid Spectrophotometric Method First Edition; Replaces ISO R 313: 1963 Glass - Determination of Coefficient of Mean Linear Thermal Expansion First Edition Iron Ores - Determination of Reduction Properties Under Load First Edition Aerospace - Nuts, Hexagonal, Self-Locking, with MJ Threads, Classification 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa(at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius Dimensions Third Edition Ambient Air - Determination of the Mass Concentration of Nitrogen Oxides - Chemiluminescence Method First Edition Optics and Optical Instruments - Spectacle Frames - Vocabulary and Lists of Equivalent Terms First Edition; (PNS 1243: 1994) (CEN EN ISO 7998: 1996) Cinematography - Underexposed Motion-Picture Film Requiring Forced Development - Designation Method First Edition Mechanical Vibrations - Land Vehicles - Method for Reporting Measured Data First Edition Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Measurement of Dynamic Viscosity First Edition Carbonaceous Materials for the Production of Aluminium - Calcined Coke and Calcined Carbon Products - Determination of the Density in Xylene - Pyknometric Method First Edition Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content Second Edition

ISO

8006

ISO

8007-1

ISO

8007-2

ISO

8007-3

ISO

8008

ISO ISO ISO ISO ISO ISO ISO ISO

8009 8013 8015 8016 8017 8018 8020 8022

Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Determination of Ash First Edition Carbonaceous Materials Used in the Production of Aluminium - Sampling Plans and Sampling From Individual Units - Part 1: Cathode Blocks First Edition Carbonaceous Materials Used in the Production of Aluminium - Sampling Plans and Sampling From Individual Units - Part 2: Prebaked Anodes First Edition Carbonaceous materials used in the production of aluminium Sampling plans and sampling from individual units Part 3: Sidewall blocks First Edition Aluminium oxide primarily used for the production of aluminium Determination of specific surface area by nitrogen adsorption Second Edition Mechanical contraceptives Reusable natural and silicone rubber contraceptive diaphragms Requirements and tests First Edition; Replaces ISO 8009-1, ISO 8009-2, ISO 8009-3, ISO 8009-4, ISO 8009-5, ISO 8009-6, ISO 8009-7, ISO 8009-8, ISO 8009-9 and ISO 8009-10 Rubber, vulcanized Determination of creep in compression or shear Second Edition Technical Drawings - Fundamental Tolerancing Principle First Edition Machinery for Agriculture - Wheels with Integral Hub First Edition Tools for moulding ù Guide pillars, straight and shouldered, and locating guide pillars, shouldered Second Edition Tools for moulding ù Guide bushes, headed, and locating guide bushes, headed Second Edition Tools for Pressing - Punches with Cylindrical Head and Straight or Reduced Shank Third Edition Surface Active Agents - Determination of Wetting Power by Immersion Second Edition

ISO ISO ISO ISO

8026 8028 8029 8030

Agricultural Irrigation Equipment - Sprayers - General Requirements and Test Methods Second Edition; Amendment 1: 06-15-2000 Rubber and/or Plastics Hoses and Hose Assemblies for Airless Paint Spraying - Specification Second Edition Plastics hose ù General-purpose collapsible water hose, textilereinforced ù Specification Second Edition Rubber and Plastics Hoses - Method of Test for Flammability Second Edition

ISO ISO ISO ISO

8031 8032 8033 8035

Rubber and Plastics Hoses and Hose Assemblies - Determination of Electrical Resistance Second Edition; (CEN EN 28031: 1993) Rubber and Plastics Hose Assemblies - Flexing Combined with Hydraulic Impulse Test (Half-Omega Test) Second Edition Rubber and plastics hoses Determination of adhesion between components Third Edition Commercial Road Vehicles and Buses over 3,5 t - Front Towing Attachments First Edition

ISO ISO

8036 8037-1

ISO

8037-2

ISO

8038-1

Optics and photonics Microscopes Immersion liquids for light microscopy First Edition;: 1998 [Replaced: ISO 8036-1, ISO 8036-1] Optics and Optical Instruments - Microscopes - Slides - Part 1: Dimensions, Optical Properties and Marking First Edition Optics and Optical Instruments - Microscopes - Slides - Part 2: Quality of Material, Standards of Finish and Mode of Packaging First Edition; Technical Corrigendum 1: 11/01/2002 Optics and Optical Instruments - Microscopes - Screw Threads for Objectives and Related Nosepieces Part 1: Screw Thread Type RMS (4/5 in x 1/36 in) First Edition

ISO ISO ISO ISO ISO ISO

8038-2 8039 8040 8041 8042 8043

ISO ISO ISO ISO ISO ISO ISO ISO

8044 8048 8049 8050 8051 8052 8053 8054

ISO

8056-1

ISO

8056-2

ISO

8056-3

ISO ISO ISO ISO

8056-4 8058 8061 AMD 1 8061

ISO

8062-1

ISO

8062-3

ISO

8063-1

ISO

8063-2

Optics and Optical Instruments - Screw Threads for Microscope Objectives and Related Nosepieces - Part 2: Screw Thread Type M25 x 0,75 mm First Edition Optics and Optical Instruments - Microscopes - Magnification First Edition Optics and Optical Instruments - Microscopes - Dimensions of Tube Slide and Tube Slot Connections Second Edition Human Response to Vibration - Measuring Instrumentation Second edition Shock and Vibration Measurements - Characteristics to Be Specified for Seismic Pick-Ups First Edition Oriental Leaf Tobacco - Determination of Form and Size Characteristics First Edition Corrosion of Metals and Alloys - Basic Terms and Definitions Corrosion Des Metaux Et Alliages - Termes Principaux Et Definitions Third Edition Technical Drawings - Construction Drawings - Representation of Views, Sections and Cuts First Edition Ferronickel Shot - Sampling for Analysis First Edition Ferronickel Ingots or Pieces - Sampling for Analysis First Edition Long Shank Taps with Nominal Diameters from M3 to M10 - Full-Diameter Shank Taps with Recess Second Edition Mopeds - Direct Current Flasher Units Second Edition Rubber and Latex - Determination of Copper Content - Photometric Method Second Edition Rubber, Compounded or Vulcanized - Determination of Sulfide Sulfur Content - Iodometric Method Second Edition Aircraft - Nickel-Chromium and Nickel-Aluminium Thermocouple Extension Cables - Part 1: Conductors - General Requirements and Tests First Edition Aircraft - Nickel-Chromium and Nickel-Aluminium Thermocouple Extension Cables - Part 2: Terminations - General Requirments and Tests First Edition Aircraft - Nickel-Chromium and Nickel-Aluminium Thermocouple Extension Cables - Part 3: Crimp-Type Ring Terminal Ends Dimensions First Edition Aircraft - Nickel-Chromium and Nickel-Aluminium Thermocouple Extension Cables - Part 4: Crimp-Type Butt Connectors Dimensions First Edition Air Cargo - Insulated Containers - Thermal Efficiency Requirements Second Edition Alpine ski-bindings ù Selection of release torque values AMENDMENT 1 Third Edition Alpine ski-bindings ù Selection of release torque values Third Edition Geometrical product specifications (GPS) ù Dimensional and geometrical tolerances for moulded parts ù Part 1: Vocabulary SpÚcification gÚomÚtrique des produits (GPS) ù TolÚrances dimensionnelles et gÚomÚtriques des pi×ces moulÚes ù Partie 1: Vocabulaire First Edition [Replaced: ISO 8062] Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings First Edition [Replaced: ISO 8062] Information Processing - Data Interchange on 6,30 mm (0.25 in) Wide Magnetic Tape Cartridge Using IMFM Recording at 252 ftpmm (6 400 ftpi) - Part 1: Mechanical, Physical and Magnetic Properties First Edition Information Processing - Data Interchange on 6,30 mm (0.25 in) Wide Magnetic Tape Cartridge Using IMFM Recording at 252 ftpmm (6 400 ftpi) - Part 2: Track Format and Method of Recording for Data Interchange in Start/Stop Mode First Edition

ISO

8064

ISO ISO

8066-2 8067

ISO ISO

8068 8069

ISO

8070

ISO

8072

ISO ISO ISO ISO ISO ISO ISO

8073 8074 8075 8078 8079 8080 8081

ISO

8082

ISO ISO

8083 8084

ISO

8085-1

ISO

8085-2

ISO

8085-3 CORR 1

ISO ISO ISO

8085-3 8086 8087

Information Processing - Reels for 12,7 mm (0.5 in) Wide Magnetic Tapes - Sizes 16, 18 and 22 First Edition; CEN EN 28064: 1993 Rubber and Plastics Hoses and Hose Assemblies for Automotive Air Conditioning - Specification - Part 2: Refrigerant 134a First Edition Flexible Cellular Polymeric Materials - Determination of Tear Strength First Edition; (CEN PREN 28067: 1994) Lubricants, industrial oils and related products (class L) Family T (Turbines) Specification for lubricating oils for turbines Second Edition Dried milk - Determination of content of latic acid and lactates Second Edition Milk and milk products - Determination of calcium, sodium, potassium and magnesium contents - Atomic absorption spectrometric method Second Edition Information Technology - Open Systems Interconnection - Transport Service Definition Third Edition; CAN/CSA-ISO/IEC 8072-95; CEN EN ISO/IEC 8072: 1995 Information Technology - Open Systems Interconnection - Protocol for Providing the Connection-Mode Transport Service Fourth Edition; Amendment 1-1998 Aerospace - Surface Treatment of Austenitic Stainless Steel Parts First Edition Aerospace - Surface Treatment of Hardenable Stainless Steel Parts First Edition Aerospace Process - Anodic Treatment of Aluminium Alloys - Sulfuric Acid Process, Undyed Coating First Edition Aerospace Process - Anodic Treatment of Aluminium Alloys - Sulfuric Acid Process, Dyed Coating First Edition Aerospace - Anodic Treatment of Titanium and Titanium Alloys - Sulfuric Acid Process First Edition Aerospace Process - Chemical Conversion Coating for Aluminium Alloys - General Purpose First Edition Self Propelled Machinery for Forestry - Roll-Over Protective Structures - Laboratory Tests and Performance Requirements Second Edition Machinery for Forestry - Falling-Object Protective Structures (FOPS) - Laboratory Tests and Performance Requirements Second Edition Machinery for forestry Operator protective structures Laboratory tests and performance requirements Second Edition Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Metric Series - Specifications - Part 1: Fittings for Socket Fusion Using Heated Tools First Edition Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Metric Series - Specifications - Part 2: Spigot Fittings for Butt Fusion, for Socket Fusion Using Heated Tools and for Use with Electrofusion Fittings First Edition; Corrigendum 1 12/01/2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels ù Metric series ù Specifications ù Part 3: Electrofusion fittings TECHNICAL CORRIGENDUM 1 First Edition Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Metric Series - Specifications - Part 3: Electrofusion Fittings First Edition Dairy Plant - Hygiene Conditions - General Guidance on Inspection and Sampling Procedures Second Edition Mobile Cranes - Drum and Sheave Sizes First Edition

ISO ISO

8088 8090

ISO

8092-1

ISO

8092-2

ISO

8092-3

ISO ISO ISO ISO ISO

8092-4 8093 8094 8095 8096 CORR 1

ISO ISO ISO ISO ISO ISO ISO

8096 8097 8098 8099 8106 8107 8109

ISO ISO

8112 8113

ISO ISO ISO ISO ISO ISO ISO

8114 8115 8115-2 8115-3 8116-1 8116-2 8116-3

ISO

8116-4

Equipment for Olive Cultivation and Olive Oil Production - Vocabulary First Edition Cycles - Terminology First Edition Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 1: Tabs for Single-Pole Connections - Dimensions and Specific Requirements Second Edition Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements Fourth Edition Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 3: Tabs for Multi-Pole Connections - Dimensions and Specific Requirements First Edition Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 4: Pins for Single- and Multi-Pole Connections Dimensions and Specific Requirements First Edition Road Vehicles - Diagnostic Testing of Electronic Systems First Edition Steel Cord Conveyor Belts - Adhesion Strength Test of the Cover to the Core Layer First Edition; (CEN EN 28094: 1994) PVC-Coated Fabrics for Tarpaulins - Specification First Edition Rubber- or plastics-coated fabrics for water-resistant clothing ù Specification TECHNICAL CORRIGENDUM 1 First Edition Rubber- or plastics-coated fabrics for water-resistant clothing ù Specification First Edition [Replaced: ISO 8096-1, ISO 8096-2, ISO 8096-3] Aircraft - Minimum Airworthiness Requirements and Test Conditions for Certified Air Cargo Unit Load Devices Fourth Edition Cycles - Safety Requirements for Bicycles for Young Children Second Edition Small Craft - Toilet Waste Retention Systems Second Edition Glass containers Determination of capacity by gravimetric method Test method Second Edition Nuclear Power Plants - Maintainability - Terminology First Edition Banking and Related Financial Services - Securities - Format of Eurobonds Second Edition Caprolactam for Industrial Use - Determination of Colour of 50 % Aqueous Caprolactam Solution, Expressed in Hazen Units (Platinum-Cobalt Scale) - Spectrometric Method First Edition Glass Containers - Resistance to Vertical Load - Test Method Second Edition Textile Machinery and Accessories - Spindles for Ring-Spinning and Doubling Machines - List of Equivalent Terms First Edition Cotton Bales - Dimensions and Density First Edition Bales - Part 2: Bales of Man-Made Staple Fibres - Dimensions First Edition Bales - Part 3: Bales of Cotton - Packaging and Labelling First Edition Textile Machinery and Accessories - Beams for Winding - Part 1: General Vocabulary Second Edition Textile Machinery and Accessories - Beams for Winding - Part 2: Warper┤s Beams Second Edition Textile Machinery and Accessories - Beams for Winding - Part 3: Weaver┤s Beams Second Edition; Textile Machinery and Accessories - Beams for Winding - Part 4: Quality Classification of Flanges for Weaver┤s Beams, Warper┤s Beams and Sectional Beams Second Edition

ISO

8116-5

Textile Machinery and Accessories - Beams for Winding - Part 5: Sectional Beams for Warp Knitting Machines Second Edition

ISO

8116-6

Textile Machinery and Accessories - Beams for Winding - Part 6: Beams for Ribbon Weaving and Ribbon Knitting Second Edition

ISO

8116-7

ISO ISO ISO

8116-8 8116-9 8117

ISO

8118-1

ISO

8118-2

ISO ISO ISO ISO

8119-1 8119-2 8119-3 8121

Textile Machinery and Accessories - Beams for Winding - Part 7: Beams for Dyeing Silvers, Rovings and Yarns First Edition; Textile Machinery and Accessories - Beams for Winding - Part 8: Definitions of Run-Out Tolerances and Methods of Measurement First Edition Textile Machinery and Accessories - Beams for Winding - Part 9: Dyeing Beams for Textile Fabrics First Edition Textile Machinery - Knitting Machines - Nominal Diameters of Circular Machines Second Edition Textile machinery - Weaving machine temples - Part 1: Temple cylinders First Edition; Together with ISO 8118-2:2006 replaces ISO 8118:1986 Textile machinery - Weaving machine temples - Part 2: Full-width temples First Edition; Together with ISO 8118-1:2006 replaces ISO 8118:1986 Textile Machinery and Accessories - Needles for Knitting Machines - Terminology - Part 1: Latch-Type Needles First Edition; (Corrected and Reprinted - 1989) Textile Machinery and Accessories - Needles for Knitting Machines - Terminology - Part 2: Bearded Needles First Edition Textile Machinery and Accessories - Needles for Knitting Machines - Terminology - Part 3: Compound Needles First Edition Textile machinery ù Knitting machines ù Nameplate information Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO

8122 8123 8124-1 AMD 2 8124-1 AMD 1 8124-1 8124-1 DAM 1 8124-2 8124-3

Textile Machinery - Knitting Machines - Number of Needles for Circular Knitting Machines of Large Nominal Diameter Second Edition Road Vehicles - Diametral Pitch Starter Motor Pinions First Edition Safety of Toys - Part 1: Saftey Aspects to Mechanical and Physical Properties AMENDMENT 2 First Edition Safety of Toys - Part 1: Saftey Aspects to Mechanical and Physical Properties AMENDMENT 1 First Edition Safety of Toys - Part 1: Saftey Aspects to Mechanical and Physical Properties First Edition Safety of Toys - Part 1: Saftey Aspects to Mechanical and Physical Properties First Edition Safety of Toys - Part 2: Flammability Second Edition Safety of Toys - part 3: Migration of Certain Elements First Edition

ISO ISO

8126 8127-1

ISO

8128-1

ISO ISO

8128-2 8130-1

Micrographics - Duplicating Film, Silver, Diazo and Vesicular - Visual Density - Specifications and Measurement Second Edition Micrographics - A6 Size Microfilm Jackets - Part 1: Five Channel Jacket for 16 mm Microfilm First Edition Apple Juice, Apple Juice Concentrates and Drinks Containing Apple Juice - Determination of Patulin Content - Part 1: Method Using High-Performance Liquid Chromatography First Edition Apple Juice, Apple Juice Concentrates and Drinks Containing Apple Juice - Determination of Patulin Content - Part 2: Method Using Thin-Layer Chromatography First Edition Coating Powders - Part 1: Determination of Particle Size Distribution by Sieving First Edition

ISO ISO ISO ISO

8130-2 8130-3 8130-4 8130-5

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

8130-6 8130-7 8130-8 8130-9 8130-10 8130-11 8130-12 8130-13 8130-14 8131

ISO

8132

ISO

8133

Coating Powders - Part 2: Determination of Density by Gas Comparison Pyknometer (Refree Method) First Edition Coating Powders - Part 3: Determination of Density by Liquid Displacement Pyknometer First Edition Coating Powders - Part 4: Calculation of Lower Explosion Limit First Edition; Corrigendum 1: 1993 Coating Powders - Part 5: Determination of Flow Properties of a Powder/Air Mixture First Edition Coating Powders - Part 6: Determination of Gel Time of Thermosetting Coating Powders at a Given Temperature First Edition; Amendment 1-1998 Coating Powders - Part 7: Determination of Loss of Mass on Stoving First Edition Coating Powders - Part 8: Assessment of the Storage Stability of Thermosetting Powders First Edition Coating Powders - Part 9: Sampling First Edition Coating Powders - Part 10: Determination of Deposition Efficiency First Edition Coating Powers - Part 11: Inclined-Plane Flow Test First Edition Coating Powders - Part 12: Determination of Compatibilty First Edition Coating Powders - Part 13: Particle Size Analysis by Laser Diffraction First Edition Coating Powders - Part 14: Terminology First Edition Hydraulic Fluid Power - Single Rod Cylinders, 16 MPa (160 Bar) Compact Series - Tolerances Second Edition Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series Mounting dimensions for accessories Second Edition; Supersedes IS0 8132: 1996, ISO 6981: 1992 and ISO 6982: 1992 Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) compact series Mounting dimensions for accessories Second Edition; Supersedes ISO 6982: 1995 and ISO 8138: 1998

ISO

8135

Hydraulic Fluid Power - Single Rod Cylinders, 16 MPa (160 Bar) Medium and 25 MPa (250 Bar) Series - Tolerances Second Edition

ISO ISO ISO

8139 8140 8142

ISO

8144-1

ISO ISO ISO ISO ISO

8144-2 8145 8146 8147 8148

Pneumatic Fluid Power - Cylinders, 1 000 kPa (10 Bar) Series - Rod End Spherical Eyes - Mounting Dimensions Second Edition Pneumatic Fluid Power - Cylinders, 1 000 kPa (10 Bar) Series - Rod End Clevis - Mounting Dimensions Second Edition Thermal Insulation - Bonded Preformed Man-Made Mineral Fibre Pipe Sections - Specification First Edition Thermal Insulation - Mineral Wool Mats for Ventilated Roof Spaces - Part 1: Specification for Applications with Restricted Ventilation First Edition Thermal Insulation - Mineral Wool Mats for Ventilated Roof Spaces - Part 2: Specification for Horizontal Applications with Unrestricted Ventilation First Edition Thermal Insulation - Mineral Wool Board for Overdeck Insulation of Roofs - Specification First Edition Shipbuilding and Marine Structures - Oval Eyeplates First Edition Shipbuilding and Marine Structures - Derrick Rigs and Component Parts - Vocabulary First Edition Shipbuilding and Marine Structures - Derrick Boom Headfittings - Fixed Type First Edition

ISO ISO

8151 8152

Dried Milk - Determination of Nitrate Content - Method by Cadmium Reduction and Spectrometry (Screening Method) First Edition Earth-Moving Machinery - Operation and Maintenance - Training of Mechanics First Edition

ISO ISO ISO ISO

8156 8157 8159 8160

Dried milk and dried milk products - Determination of insolubility index Second Edition; IDF 129 Fertilizers and Soil Conditioners - Vocabulary First Edition Textiles - Morphology of Fibres and Yarns - Vocabulary First Edition Textiles - Textured Filament Yarns - Vocabulary First Edition Water Quality - Determination of Selected Monovalent Phenols - Part 1: Gas-Chromatographic Method After Enrichment by Extraction First Edition

ISO

8165-1

ISO

8165-2

ISO ISO

8166 8167

ISO ISO

8168 8169

ISO ISO

8174 8177

ISO

8178-1

ISO

8178-2

ISO

8178-3

ISO

8178-4

ISO

8178-5

ISO

8178-6

Water Quality - Determination of Selected Monovalent Phenols - Part 2: Method by Derivation and Gas Chromatography First Edition Resistance Welding - Procedure for the Evaluation of the Life of Spot Welding Electrodes Using Constant Machine Settings First Edition Projections for Resistance Welding First Edition Aerospace - Corrosion- and Heat-Resisting Steel Bolts with Strength Classification 1 100 MPa and MJ Threads - Procurement Specification First Edition Equipment for Crop Protection - Sprayers - Connecting Dimensions for Nozzles and Manometers First Edition Ethylene and Propylene for Industrial Use - Determination of Acetone, Acetonitrile, Propan-2-ol and Methanol - Gas Chromatographic Method First Edition Aerospace - Omega Clamps (Saddle Clamps) for Fluid Systems - Dimensions Second Edition Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement of gaseous and particulate exhaust emissions Second Edition Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 2: Measurement of Gaseous and Particulate Exhaust Emissions at Site First Edition CEN EN ISO 8178-2: 1996 Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 3: Definitions and Methods of Measurement of Exhaust Gas Smoke Under Steady-State Conditions First Edition Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 4: Test Cycles for Different Engine Applications First Edition CEN EN ISO 8178-4: 1996 Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 5: Test Fuels First Edition; Corrected and Reprinted 05/15/1998 Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 6: Report of Measuring Results and Test First Edition

ISO

8178-7

Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 7: Engine Family Determination First Edition

ISO

8178-8

ISO

8178-9

Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 8: Engine Group Determination First Edition Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 9: Test Cycles and Test Procedures for TestBed Measurement of Exhaust Gas Smoke Emissions from Compression Ignition Engines Operating Under Transient Conditions First Edition; Amendment 1: 10/15/2004

ISO

8178-10

ISO ISO ISO ISO ISO ISO ISO

8178-11 8179-1 8179-2 8180 8185 8186 8188

ISO

8191-1

ISO

8191-2

ISO ISO

8192 8193

ISO

8194

ISO

8196-1

ISO ISO ISO ISO

8196-2 8197 8199 8201

ISO

8205-1

ISO ISO ISO

8205-2 8205-3 8206

ISO

8207

Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 10: Test Cycles and Test Procedures for Field Measurement of Exhaust Gas Smoke Emissions from Compression Ignition Engines Operating Under Transient Conditions First Edition Reciprocating internal combustion engines Exhaust emission measurement Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions First Edition Ductile iron pipes External zinc-based coating Part 1: Metallic zinc with finishing layer Second Edition Ductile Iron Pipes - External Zinc Coating - Part 2: Zinc Rich Paint with Finishing Layer First Edition; Ductile iron pipelines Polyethylene sleeving for site application Second Edition Respiratory tract humidifiers for medical use - Particular requirements for respiratory humidification systems Third Edition Ambient Air - Determination of the Mass Concentration of Carbon Monoxide - Gas Chromatographic Method First Edition Textile Machinery and Accessories - Pitches of Knitting Machines Second Edition Furniture - Assessment of the Ignitability of Upholstered Furniture - Part 1: Ignition Source: Smouldering Cigarette First Edition; (CEN EN 1021-1: 1993) Furniture - Assessment of Ignitability of Upholstered Furniture - Part 2: Ignition Source: Match-Flame Equivalent First Edition; (CEN EN 1021-2: 1993) Water quality ù Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation Second Edition Shipbuilding - Shell Plating Information First Edition Radiation Protection - Clothing for Protection Against Radioactive Contamination - Design, Selection, Testing and Use First Edition Milk - Definition and Evaluation of the Overall Accuracy of Indirect Methods of Milk Analysis - Part 1: Analytical Attributes of Indirect Methods First Edition Milk - Definition and Evaluation of the Overall Accuracy of Indirect Methods of Milk Analysis - Part 2: Calibration and Quality Control in the Dairy Laboratory First Edition Milk and Milk Products - Sampling - Inspection by Variables First Edition Water quality General guidance on the enumeration of micro-organisms by culture Second Edition Acoustics - Audible Emergency Evacuation Signal First Edition Water-Cooled Secondary Connection Cables for Resistance Welding - Part 1: Dimensions and Requirements for Double-Conductor Connection Cables Second Edition Water-Cooled Secondary Connection Cables for Resistance Welding - Part 2: Dimensions and Requirements for Single-Conductor Connection Cables Second Edition Water-Cooled Secondary Connection Cables for Resistance Welding - Part 3: Test Requirements First Edition Acceptance Tests for Oxygen Cutting Machines - Reproducible Accuracy - Operational Characteristics First Edition Gas Welding Equipment - Specification for Hose Assemblies for Equipment for Welding, Cutting and Allied Processes First Edition

ISO ISO

8208 8210

Information Technology - Data Communications - X.25 Packet Layer Protocol for Data Terminal Equipment Fourth Edition Equipment for Harvesting - Combine Harvesters - Test Procedure First Edition

ISO ISO

8211 8212

ISO ISO ISO ISO

8213 8214 8215 8216-1

ISO ISO ISO ISO ISO

8216-2 8216-3 8216-99 8217 8218

ISO

8220

ISO

8222

ISO ISO

8224-1 8224-2

ISO

8226-1

ISO ISO ISO ISO ISO ISO ISO ISO

8226-2 8229 8230 8232 8233 8239 8242 8243

ISO

8245

Information Processing - Specification for a Data Descriptive File for Information Interchange Second Edition; AS/NZS 3654: 1996 Soaps and Detergents - Techniques of Sampling During Manufacture First Edition Chemical Products for Industrial Use - Sampling Techniques - Solid Chemical Products in the Form of Particles Varying from Powders to Coarse Lumps First Edition Surface Active Agents - Washing Powders - Determination of Inorganic Sulfates - Gravimetric Method First Edition Surface Active Agents - Washing Powders - Determination of Total Silica Content - Gravimetric Method First Edition Petroleum products Fuels (class F) classification Part 1: Categories of marine fuels Third Edition Petroleum Products - Fuels (Class F) - Classification - Part 2: Categories of Gas Turbine Fuels for Industrial and Marine Applications First Edition Petroleum Products - Fuels (Class F) - Classification - Part 3: Family L (Liquefied Petroleum Gases) First Edition Petroleum Products - Fuels (Class F) - Classifications - Part 99: General First Edition; Replaces ISO 8216-0 Petroleum products - Fuels (class F) - Specifications of marine fuels Third Edition Road Vehicles - Levelling Devices for Headlamp Dipped Beam First Edition Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of the Fine Particle Size Distribution (Less Than 60 Micrometer) - Method Using Electroformed Sieves First Edition Petroleum measurement systems Calibration Temperature corrections for use when calibrating volumetric proving tanks Second Edition Traveller irrigation machines Part 1: Operational characteristics and laboratory and field test methods Second Edition; Corrected version: 02/15/2004 Traveller Irrigation Machines - Part 2: Softwall Hose and Couplings - Test Methods First Edition Paper and Board - Measurement of Hygroexpansivity - Part 1: Hygroexpansivity up to a Maximum Relative Humidity of 68 % Second Edition Paper and Board - Measurement of Hygroexpansivity - Part 2: Hygroexpansivity up to a Maximum Relative Humidity of 86 % First Edition Operations and Baths Relating to Dry-Cleaning Machines - Vocabulary First Edition Safety Requirements for Dry-Cleaning Machines Using Perchloroethylene First Edition Closed-Circuit Dry-Cleaning Machines - Defining and Checking of Machine Characteristics First Edition Thermoplastics Valves - Torque - Test Method First Edition; (Corrected and Reprinted - 1989) Sewing Machine Needles - Fitting Dimensions - Tolerances and Combinations First Edition Polypropylene (PP) Valves for Pipes Under Pressure - Basic Dimensions - Metric Series First Edition Cigarettes - Sampling Fourth Edition Water Quality - Guidelines for the Determination of Total Organic Carbon (TOC) and Dissolved Organic Carbon (DOC) Second Edition

ISO

8248

Windows and Door Height Windows - Mechanical Tests First Edition Welding - Determination of Ferrite Number (FN) in Austenitic and Duplex Ferritic-Austenitic Cr-Ni Stainless Steel Weld Metals Second Edition Anodized Aluminium and Aluminium Alloys - Measurement of Wear Resistance and Wear Index of Anodic Oxide Coatings with an Abrasive Wheel Wear Test Apparatus First Edition; (Corrected and Reprinted - 1989) Anodized Aluminium and Aluminium Alloys - Measurement of Mean Specific Abrasion Resistance of Anodic Oxidation Coatings with an Abrasive Jet Test Apparatus First Edition

ISO

8249

ISO

8251

ISO

8252

ISO

8253-1

Acoustics - Audiometric Test Methods - Part 1: Basic Pure Tone Air and Bone Conduction Threshold Audiometry First Edition

ISO ISO

8253-2 8253-3

Acoustics - Audiometric Test Methods - Part 2: Sound Field Audiometry with Pure Tone and Narrow-Band Test Signals First Edition Acoustics - Audiometric Test Methods - Part 3: Speech Audiometry First Edition

ISO

8254-1

Paper and Board - Measurement of Specular Gloss - Part 1: 75 Degree Gloss with a Converging Beam, TAPPI Method First Edition

ISO ISO

8254-2 8254-3

ISO

8255-1

ISO ISO

8255-2 8256

ISO

8257-1

ISO ISO

8257-2 8258

ISO

8261

ISO

8262-1

ISO

8262-2

ISO ISO

8262-3 8263

Paper and Board - Measurement of Specular Gloss - Part 2: 75 Degress Gloss with a Parallel Beam, DIN Method First Edition Paper and board Measurement of specular gloss Part 3: 20░ gloss with a converging beam, TAPPI method First Edition Optics and Optical Instruments - Microscopes - Cover Glasses - Part 1: Dimensional Tolerances, Thickness and Optical Properties First Edition Optics and Optical Instruments - Microscopes - Cover Glasses - Part 2: Quality of Materials, Standards of Finish and Mode of Packaging First Edition Plastics - Determination of Tensile-Impact Strength Second Edition Plastics - Poly(Methyl Methacrylate) (PMMA) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Second Edition Plastics - Poly(Methyl Methacrylate) (PMMA) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties Second Edition; Corrected Version 11/01/2003 Shewhart Control Charts (AS/NZS 3944: 1993) First Edition; Corrigendum 1: 1993 Milk and Milk Products - General Guidance for the Preparation of Test Samples,Initial Suspensions and Decimal Dilutions for Microbiological Examination Second Edition; IDF 122:2001 Milk products and milk-based foods - Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method) Part 1: Infant foods Second Edition Milk products and milk-based foods - Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method) Part 2: Edible ices and ice-mixes Second Edition Milk Products and Milk-Based Foods - Determination of Fat Content by the Weibull-Berntrop Gravimetric Method (Reference Method) - Part 3: Special Cases Second Edition Iron Ore Fines - Method for Presentation of the Results of Sintering Tests First Edition; (Corrected and Reprinted - 1993)

ISO

8264

Hard Coal - Determination of the Swelling Properties Using a Dilatometer First Edition Water Quality - Design and Use of Quantitative Samplers for Benthic Macro-Invertebrates on Stony Substrata in Shallow Freshwaters First Edition; (CEN EN 28265: 1994)

ISO

8265

ISO

8267-1

Aircraft Tow bar attachment fittings interface requirements Part 1: Main line aircraft First Edition; Supersedes ISO 8267:1997

ISO ISO ISO ISO ISO ISO

8267-2 8268 8269 8270 8271 8272

ISO ISO ISO ISO ISO

8273 8274 8275 8277 8278

ISO ISO ISO

8279 8280 8282

ISO

8283-1

ISO

8283-2

ISO

8283-3

ISO

8283-4

ISO

8287

ISO

8288

Aircraft Tow bar attachment fittings interface requirements Part 2: Regional aircraft First Edition; Supersedes ISO 8267:1997 Air Cargo Equipment - Automobile Transport Devices - Basic Requirements First Edition Doorsets - Static Loading Test First Edition Doorsets - Soft Heavy Body Impact Test First Edition Door Leaves - Determination of the resistance to hard body impact Second Edition Doorsets - Air Permeability Test First Edition Doors and Doorsets - Standard Atmospheres for Testing the Performance of Doors and Doorsets Placed Between Different Climates First Edition; (PNS 657: 1990) Windows and doors Resistance to repeated opening and closing Test method Second Edition Doorsets - Vertical Load Test First Edition Shipbuilding - Pipework - Information Transfer First Edition Aerospace - Hydraulic, Pressure Compensated, Variable Delivery Pumps - General Requirements First Edition Aerospace - Nuts, Hexagonal, Plain, Nrml Ht., Nrml Across Flats, with MJ Threads, Cls: 600 MPa (at Ambt T)/120 Dgs. C, 600 MPa (at Ambt T)/235 Dgs. C, 900 MPa (at Ambt T)/425 Dgs. C, 1 100 MPa (at Ambt T)/235 Dgs. C, 1 100 MPa (at Ambt T)/315 Dgs. C, 1 100 MPa (at Ambt T)/650 Degs. C, 1 210 MPa (at Ambt T)/730 Degs. C, 1 250 MPa (at Ambt T)/235 Dgs. C and 1 550 MPa (at Ambt T)/600 Dgs. C - Dims. Second Edition Aerospace - Rivets, Solid, Universal Head, Metallic Material, with or without Surface Treatment - Dimensions First Edition Dental Equipment - Mercury and Alloy Mixers and Dispensers First Edition Plastics Pipes and Fittings - Dimensions of Sockets and Spigots for Discharge Systems Inside Buildings - Part 1: Unplasticized Poly(Vinyl Chloride) (PVC-U) and Chlorinated Poly(Vinyl Chloride) (PVC-C) First Edition Plastics Pipes and Fittings - Dimensions of Sockets and Spigots for Discharge Systems Inside Buildings - Part 2: Polyethylene (PE) First Edition Plastics Pipes and Fittings - Dimensions of Sockets and Spigots for Discharge Systems Inside Buildings - Part 3: Polypropylene (PP) First Edition Plastics Pipes and Fittings - Dimensions of Sockets and Spigots for Discharge Systems Inside Buildings - Part 4: Acrylonitrile/Butadiene/ Styrene (ABS) First Edition Magnesium and Magnesium Alloys - Unalloyed Magnesium - Chemical Composition Second Edition; This Second Edition Cancels and Replaces the First Edition ISO 8287: 1984, Water Quality - Determination of Cobalt, Nickel, Copper, Zinc, Cadmium and Lead - Flame Atomic Absorption Spectrometric Methods First Edition

ISO ISO ISO

8289 8290 8291

Vitreous and Porcelain Enamels - Low Voltage Test for Detecting and Locating Defects Second Edition Vitreous and Porcelain Enamels - Determination of Resistance to Sulfuric Acid at Room Temperature Second Edition Vitreous and Porcelain Enamels - Method of Test of Self-Cleaning Properties First Edition

ISO

8292

ISO ISO ISO

8294 8295 8296

ISO

8297

ISO

8298

ISO

8299

Animal and Vegetable Fats and Oils - Determination of Solid Fat Content - Pulsed Nuclear Magnetic Resonance Method First Edition Animal and Vegetable Fats and Oils - Determination of Copper, Iron and Nickel Contents - Graphite Furnace Atomic Absorption Method First Edition Plastics - Film and Sheeting - Determination of the Coefficients of Friction Second Edition Plastics - Film and Sheeting - Determination of Wetting Tension Second Edition Acoustics - Determination of Sound Power Levels of Multisource Industrial Plants for Evaluation of Sound Pressure Levels in the Environment - Engineering Method First Edition Nuclear Fuel Technology - Determination of Milligram Amounts of Plutonium in Nitric Acid Solutions - Potentiometric Titration with Potassium Dichromate after Oxidation by Ce(IV) and Reduction by Fe(II) Second Edition Nuclear fuel technology Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry Second Edition

ISO

8300

ISO

8301

ISO ISO ISO ISO ISO

8302 8303 8304 8307 8308

ISO

8310

ISO ISO ISO

8311 8312 8314

ISO

8316

ISO ISO

8317 CORR 1 8317

Determination of Plutonium Content in Plutonium Dioxide (PuO2) of Nuclear Grade Quality - Gravimetric Method First Edition Thermal Insulation - Determination of Steady- State Thermal Resistance and Related Properties - Heat Flow Meter Apparatus First Edition; Thermal Insulation - Determination of Steady-State Thermal Resistance and Related Properties - Guarded Hot Plate Apparatus First Edition Shipbuilding - Shipborne Barges, Series 3 - Main Operational and Technical Requirements First Edition Shipbuilding - Shipborne Barges, Series 3 - Ventilation System - Principal Mating Dimensions First Edition Flexible Cellular Polymeric Materials - Determination of Resilience First Edition Rubber and plastics hoses and tubing Determination of transmission of liquids through hose and tubing walls Third Edition Refrigerated Light Hydrocarbon Fluids - Measurement of Temperature in Tanks Containing Liquefied Gases - Resistance Thermometers and Thermocouples First Edition Refrigerated Light Hydrocarbon Fluids - Calibration of Membrane Tanks and Independent Prismatic Tanks in Ships - Physical Measurement First Edition; (CEN EN ISO 8311: 1995) Rubber Compounding Ingredients - Stearic Acid - Definition and Test Methods First Edition Shipbuilding and Marine Structures - Trunnion Pieces for Span Bearings and Lead Block Bearings First Edition Measurement of Liquid Flow in Closed Conduits - Method by Collection of the Liquid in a Volumetric Tank First Edition CEN EN ISO 8316: 1995 Child-resistant packaging ù Requirements and testing procedures for reclosable packages TECHNICAL CORRIGENDUM 1 Second Edition Child-resistant packaging ù Requirements and testing procedures for reclosable packages Second Edition

ISO

8318

ISO

8319-1

ISO ISO ISO

8319-2 8323 8325

ISO

8326

ISO

8327-1

ISO ISO ISO ISO ISO ISO

8327-2 8330 8331 8332 8333 8334

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

8335 8336 8339 8340 8343 8348 8349 8351-1 8351-2 8356 8358 8359 8361-1

ISO

8361-2

Packaging - Complete, Filled Transport Packages and Unit Laods - Sinusoidal Vibration Tests Using a Variable Frequency Second Edition Orthopaedic Instruments - Drive Connections - Part 1: Keys for Use with Screws with Hexagon Socket Heads Second Edition; (CAN/CSA-Z310.16-M91) Orthopaedic Instruments - Drive Connections - Part 2: Screwdrivers for Single Slot Head Screws, Screws with Cruciate Slot and Cross-Recessed Head Screws First Edition; (CAN/CSA-Z310.17-M91) Freight Containers - Air/Surface (Intermodal) General Purpose Containers - Specification and Tests First Edition Dentistry Test methods for rotary instruments Second Edition Information Technology - Open Systems Interconnection - Session Service Definition Second Edition; Amendment 1: 10/01/1998; Amendment 2: 12/15/1998; Corrigendum 1: 5/15/2002 Information Technology - Open Systems Interconnection - Connection-Oriented Session Protocol: Protocol Specification Second Edition; Amendment 1: Efficiency Enhancements: 10-01-1998; Amendment 2: Nested Connections Functional Unit: 12-15-1998; Corrigendum 1 5/15/2002 Information Technology - Open Systems Interconnection - Connection-Oriented Session Protocol: Protocol Implementation Conformance Statement (PICS) Proforma First Edition Rubber and Plastics Hoses and Hose Assemblies - Vocabulary Second Edition Rubber and plastics hoses and hose assemblies ù Guidelines for selection, storage, use and maintenance Second Edition Rubber Compounding Ingredients - Sulfur - Methods of Test Third Edition Liquid Flow Measurement in Open Channels by Weirs and Flumes - V-Shaped Broad-Crested Weirs First Edition Forestry machinery ù Portable chainsaws ù Determination of balance and maximum holding moment Second Edition Cement-Bonded Particleboards - Boards of Portland or Equivalent Cement Reinforced with Fibrous Wood Particles First Edition Fibre-cement flat sheets First Edition; Amendment 1: 10/15/2004; Corrigendum 1: 05/15/2005 Building construction Sealants Determination of tensile properties (Extension to break) Second Edition Building construction Sealants Determination of tensile properties at maintained extension Second Edition Ferronickel - Determination of Silicon Content - Gravimetric Method First Edition Information Technology - Open Systems Interconnection - Network Service Definition Third Edition Road Vehicles - Measurement of Road Surface Friction First Edition Packaging - Method of Specification for Sacks - Part 1: Paper Sacks First Edition Packaging - Method of Specification for Sacks - Part 2: Sacks Made from Thermoplastic Flexible Film First Edition Road Vehicles - Diesel Engines - Screw-In Injector, Type 22 First Edition Solid Fertilizers - Preparation of Samples for Chemical and Physical Analysis First Edition Oxygen Concentrators for Medical Use - Safety Requirements Second Edition Thermoplastics Pipes and Fittings - Water Absorption - Part 1: General Test Method First Edition Thermoplastics Pipes and Fittings - Water Absorption - Part 2: Test Conditions for Unplasticized Poly(Vinyl Chloride) (PVC-U) Pipes and Fittings First Edition

Thermoplastics Pipes and Fittings - Water Absorption - Part 3: Test Conditions for Acrylonitrile/Butadiene/ Styrene (ABS) Pipes and Fittings First Edition Injection Containers and Accessories - Part 1: Injection Vials Made of Glass Tubing Second Edition

ISO ISO

8361-3 8362-1

ISO ISO ISO ISO

8362-2 8362-3 8362-4 8362-5

ISO

8362-6

ISO ISO ISO

8362-7 8364 8367-1

ISO

8367-2

ISO ISO ISO ISO

8368 8370-1 8370-2 8371

ISO ISO ISO

8373 8374 8375

ISO

8378-1

ISO

8378-2

Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on Both Sides - Part 1: Dimensional, Physical and Magnetic Characteristics First Edition Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on Both Sides - Part 2: Track Format A First Edition

ISO ISO ISO ISO

8378-3 8379 8380 8381

Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on Both Sides - Part 3: Track Format B Second Edition; CAN/CGSB-186.12-93 Rough Terrain Trucks - Stability Tests Amendment 1 11/15/2001 Forestry Machinery - Portable Brush-Cutters and Grass-Trimmers - Cutting Attachment Guard Strength Second Edition Milk-Based Infant Foods - Determination of Fat Content - Gravimetric Method (Reference Method) Second Edition

Injection Containers for Injectables and Accessories - Part 2: Closures for Injection Vials First Edition; (CEN EN 28362-2: 1993) Injection Containers and Accessories - Part 3: Aluminium Caps for Injection Vials Second Edition Injection containers and accessories Part 4: Injection vials made of moulded glass Second Edition Injection Containers for Injectables and Accessories - Part 5: Freeze Drying Closures for Injection Vials First Edition Injection Containers for Injectables and Accessories - Part 6: Caps Made of Aluminium-Plastics Combinations for Injection Vials First Edition Injection containers and accessories Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part Second Edition Alpine skis and bindings ù Binding mounting area ù Requirements and test methods Fourth Edition Packaging - Dimensional Tolerances for General Purpose Sacks - Part 1: Paper Sacks First Edition Packaging - Dimensional Tolerances for General Purpose Sacks - Part 2: Sacks Made from Thermoplastic Flexible Film First Edition Hydrometric Determinations - Flow Measurements in Open Channels Using Structures - Guidelines for Selection of Structure Second Edition Belt Drives - Dynamic Test to Determine Pitch Zone Location - Part 1: V-Belts First Edition Belt Drives - Dynamic Test to Determine Pitch Zone Location - Part 2: V-Ribbed Belts First Edition Iron Ores - Determination of Decrepitation Index First Edition Manipulating Industrial Robots - Vocabulary (CEN EN ISO 8373: 1996) First Edition; Amendment 1: 1996; Corrigendum 1: 1996 Photography - Determination of ISO Safelight Conditions Second Edition Solid Timber in Structural Sizes - Determination of Some Physical and Mechanical Properties First Edition

ISO

8383

ISO ISO

8384 8388

ISO

8391-1

ISO ISO

8391-2 8394

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

8395 8397 8398 8399-1 8399-2 8400 8401 8404 8405 8406 8407 8419 8420 CORR 1 8420 8421-1 8421-2 8421-3 8421-4 8421-5 8421-6 8421-7

ISO ISO

8421-8 8422

ISO

8424

Lifts on Ships - Specific Requirements First Edition; (Corrected and Reprinted - 1991) Shipbuilding and Marine Technology - Dredgers - Vocabulary Navires Et Technology Maritime - Dragues - Vocabulaire Second Edition Knitted Fabrics - Types - Vocabulary Etoffes A Mailles - Types - Vocabulaire First Edition Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 1: Method of Test First Edition; (PNS 1031-1: 1992) Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible Limits First Edition; (PNS 1031-2: 1992) Building Construction - Jointing Products - Determination of Extrudability of One-Component Sealants First Edition Cinematography - Test Films for the Reproduction of 70 mm Motion-Picture Release Prints with Magnetic Stripes - Specifications First Edition Solid Fertilizers and Soil Conditioners - Test Sieving Second Edition; (CEN EN 1235: 1995) Solid Fertilizers - Measurement of Static Angle of Repose First Edition Aerospace - Accessory Drives and Mounting Flanges (Metric Series) - Part 1: Design Criteria First Edition Aerospace - Accessory Drives and Mounting Flanges (Metric Series) - Part 2: Dimensions First Edition Cinematography - Position of Emulsion Surface of 16 mm Motion-Picture Prints - Identification First Edition Metallic Coatings - Review of Methods of Measurement of Ductility First Edition; (CEN EN ISO 8401: 1994) Tools for moulding Angle pins Second Edition Tools for Moulding - Ejector Sleeves with Cylindrical Head - Basic Series for General Purposes Second Edition Tools for Moulding - Mould Bases - Round Locating Elements and Spacers Second Edition Corrosion of Metals and Alloys - Removal of Corrosion Products from Corrosion Test Specimens First Edition Belt Drives - Narrow V-Belts - Sections 9N/J, 15N/J and 25N/J (Lengths in the Effective System) Third Edition Animal and vegetable fats and oils ù Determination of content of polar compounds Second Edition Animal and vegetable fats and oils ù Determination of content of polar compounds Second Edition Fire Protection - Vocabulary - Part 1: General Terms and Phenomena of Fire First Edition; (PNS 611-1: 1991) Fire Protection - Vocabulary - Part 2: Structural Fire Protection First Edition; (PNS 611-2: 1991) Fire Protection - Vocabulary - Part 3: Fire Detection and Alarm First Edition Fire Protection - Vocabulary - Part 4: Fire Extinction Equipment First Edition Fire Protection - Vocabulary - Part 5: Smoke Control First Edition Fire Protection - Vocabulary - Part 6: Evacuation and Means of Escape First Edition Fire Protection - Vocabulary - Part 7: Explosion Detection and Suppression Means First Edition Fire Protection - Vocabulary - Part 8: Terms Specific to Fire-Fighting, Rescue Services and Handling Hazardous Materials First Edition Sequential sampling plans for inspection by attributes Second Edition Raw Optical Glass - Resistance to Attack by Aqueous Acidic Solutions at 25 Degrees C - Test Method and Classification Second Edition

ISO ISO ISO ISO ISO

8425 8426 8429 8430-1 8430-2

Determination of Plutonium in Pure Plutonium Nitrate Solutions - Gravimetric Method First Edition Hydraulic Fluid Power - Positive Displacement Pumps and Motors - Determination of Derived Capacity First Edition Optics and Optical Instruments - Ophthalmology - Graduated Dial Scale First Edition Resistance Spot Welding - Electrode Holders - Part 1: Taper Fixing 1 : 10 First Edition Resistance Spot Welding - Electrode Holders - Part 2: Morse Taper Fixing First Edition

ISO ISO ISO

8430-3 8431 8432

Resistance Spot Welding - Electrode Holders - Part 3: Parallel Shank Fixing for End Thrust First Edition; Corrigendum 1: 1990 Shipbuilding - Fixed Jib Cranes - Ship-Mounted Type for General Cargo Handling First Edition Essential Oils - Analysis by High Performance Liquid Chromatography - General Method First Edition

ISO ISO ISO ISO ISO ISO

8434-1 8434-2 8434-3 8437 8439 8440

ISO ISO

8441-1 8441-2

ISO

8442-1

ISO

8442-2

ISO

8442-3

ISO

8442-4

ISO

8442-5

ISO

8442-6

ISO

8442-7

ISO ISO

8442-8 8443

Metallic tube connections for fluid power and general use ù Part 1: 24░ cone connectors Second Edition [Replaced: ISO 8434-4] Metallic tube connections for fluid power and general use ù Part 2: 37░ flared connectors Second Edition Metallic tube connections for fluid power and general use - Part 3: O-ring face seal connectors Second Edition Snowthrowers - Safety Requirements and Test Procedures First Edition; Amendment 1 04/01/1997 Forms Design - Basic Layout First Edition Location of Codes in Trade Documents First Edition; Technical Corrigendum 1: 12/1/2000 Information Technology - High Density Digital Recording (HDDR) - Part 1: Unrecorded Magnetic Tape for (HDDR) Applications First Edition Information Technology - High Density Digital Recording (HDDR) - Part 2: Guide for Interchange Practice First Edition Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 1: Requirements for Cutlery for the Preparation of Food First Edition Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 2: Requirements for Stainless Steel and SilverPlated Cutlery First Edition; Corrected 01/015/1998 Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 3: Requirements for Silver-Plated Table and Decorative Holloware First Edition Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 4: Requirements for Gold-Plated Cutlery First Edition; Corrected 01/15/1998 Materials and articles in contact with foodstuffs Cutlery and table holloware Part 5: Specification for sharpness and edge retention test of cutlery First Edition Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 6: Lightly Silver-Plated Table Holloware Protected by Lacquer First Edition Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 7: Requirements for Table Cutlery Made of Silver, Other Precious Metals and Their Alloys First Edition Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 8: Requirements for Silver Table and Decorative Holloware First Edition Rolling Bearings - Radial Ball Bearings with Flanged Outer Ring - Flange Dimensions Second Edition

ISO ISO ISO ISO ISO ISO ISO

8454 8455 8456 8458-1 8458-2 8458-3 8459-1

ISO

8459-2

ISO ISO

8459-3 8459-4

ISO ISO

8459-5 8460

ISO

8462-1

ISO

8462-2

ISO

8466-1

ISO ISO ISO ISO ISO

8466-2 8467 8468 8469 8470

ISO

8473-1

ISO

8473-2

ISO

8473-3

ISO

8473-4

Cigarettes ù Determination of carbon monoxide in the vapour phase of cigarette smoke ù NDIR method Third Edition Green Coffee in Bags - Guide to Storage and Transport First Edition Storage Equipment for Loose Bulk Materials - Safety Code First Edition Steel Wire for Mechanical Springs - Part 1: General Requirements Second Edition Steel Wire for Mechanical Springs - Part 2: Patented Cold-Drawn Non-Alloy Steel Wire Second Edition Steel wire for mechanical springs Part 3: Oil-hardened and tempered wire Second Edition; Corrected Version 02/01/2003 Documentation - Bibliographic Data Element Directory - Part 1: Interloan Applications First Edition AS/NZS 4450.1: 1997 Information and Documentation - Bibliographic Data Element Directory - Part 2: Acquisitions Applications First Edition AS/NZS 4450.2: 1997 Information and Documentation - Bibliographic Data Element Directory - Part 3: Information Retrieval Applications First Edition AS/NZS 4450.3: 1997 Information and Documentation - Bibliographic Data Element Directory - Part 4: Circulation Applications First Edition Information and Documentation - Bibliographic Data Element Directory - Part 5: Data Elements for the Exchange of Cataloguing and Metadata First Edition Instant Coffee - Determination of Free-Flow and Compacted Bulk Densities First Edition Information Processing - Data Interchange on 6,30 mm (0.25 in) Magnetic Tape Cartridge Using GCR Recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi) - Part 1: Mechanical, Physical and Magnetic Properties First Edition Information Processing - Data Interchange on 6,30 mm (0.25 in) Magnetic Tape Cartridge Using GCR Recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi) - Part 2: Streaming Mode First Edition Water Quality - Calibration and Evaluation of Analytical Methods and Estimation of Performance Characteristics Part 1: Statistical Evaluation of the Linear Calibration Function First Edition Water Quality - Calibration and Evaluation of Analytical Methods and Estimation of Performance Characteristics - Part 2: Calibration Strategy for Non-Linear Second-Order Calibration Functions Second Edition Water Quality - Determination of Permanganate Index Second Edition; (CEN EN ISO 8467: 1995) Ships and marine technology - Ship's bridge layout and associated equipment - Requirements and guidelines Third Edition Small Craft - Non-Fire-Resistant Fuel Hoses Second Edition Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings Third Edition Information Technology - Protocol for Providing the Connectionless-Mode Network Service: Protocol Specification Second Edition Information Technology - Protocol for Providing the Connectionless-Mode Network Service - Part 2: Provision of the Underlying Service by an ISO/IEC 8802 Subnetwork First Edition Information Technology - Protocol for Providing the Connectionless-Mode Network Service: Provision of the Underlying Service by an X.25 Subnetwork First Edition Information Technology - Protocol for Providing the Connectionless-Mode Network Service: Provision of the Underlying Service by a Subnetwork That Provides the OSI Data Link Service First Edition

Information Technology - Protocol for Providing the Connectionless-Mode Network Service: Provision of the Underlying Service by ISDN Circuit-Switched B-Channels First Edition Packaging - Complete, Filled Transport Packages - Water Immersion Test First Edition; (CEN EN 28474: 1992) Photography - Camera Lenses - Measurement of ISO Spectral Transmittance First Edition Aerospace -Q" Clamps (Centre-Mounted Clamps) for Fluid Systems - Dimensions First Edition" Information Technology - Telecommunications and Information Exchange between Systems - DTE/DCE Interface Back-Up Control Operation Using ITU-T Recommendation V.24 Interchange Circuits Second Edition Information Technology - Telecommunications and Information Exchange between Systems - DTE to DTE Direct Connections Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Twisted Pair Multipoint Interconnections Second Edition

ISO ISO ISO ISO

8473-5 8474 8478 8479

ISO

8480

ISO

8481

ISO

8482

ISO ISO ISO ISO

8483 8484 8485 8486-1

Glass-reinforced thermosetting plastics (GRP) pipes and fittings Test methods to prove the design of bolted flange joints First Edition Magnetic Stripes on Savingsbooks First Edition Programming Languages - APL First Edition; CEN EN 28485: 1993 Bonded Abrasives - Determination and Designation of Grain Size Distribution - Part 1: Macrogrits F4 F220 First Edition;

ISO ISO ISO

8486-2 8488 8489-1

ISO

8489-2

ISO

8489-3

ISO

8489-4

ISO ISO ISO ISO ISO ISO ISO

8489-5 8491 8492 8493 8494 8495 8496

ISO

8497

Bonded Abrasives - Determination and Designation of Grain Size Distribution - Part 2: Microgrits F230 to F1200 First Edition; Cycles - Screw Threads Used to Assemble Head Fittings on Bicycle Forks First Edition Textile Machinery and Accessories - Cones for Cross Winding - Part 1: Recommended Main Dimensions Second Edition Textile Machinery and Accessories - Cones for Cross Winding - Part 2: Dimensions, Tolerances and Designation of Cones with Half Angle 3 Degrees 30┤ First Edition; Replaces ISO 112:1983 Textile Machinery and Accessories - Cones for Cross Winding - Part 3: Dimensions, Tolerances and Designation of Cones with Half Angle 4 Degrees 20┤ First Edition; Replaces ISO 111: 1978 Textile Machinery and Accessories - Cones for Cross Winding - Part 4: Dimensions, Tolerances and Designation of Cones with Half Angle 4 Degrees 20┤ for Winding for Dyeing Purposes First Edition; [Replaced: ISO TS 10303-324] Textile Machinery and Accessories - Cones for Cross-Winding - Part 5: Dimensions, Tolerances and Designation of Cones with Half Angle 5 Degrees 57┤ First Edition; Metallic Materials - Tube (in Full Section) - Bend Test Second Edition Metallic Materials - Tube - Flattening Test Second Edition Metallic Materials - Tube - Drift-Expanding Test Second Edition Metallic Materials - Tube - Flanging Test Second Edition Metallic Materials - Tube - Ring-Expanding Test Second Edition Metallic Materials - Tube - Ring Tensile Test Second Edition Thermal Insulation - Determination of Steady-State Thermal Transmission Properties of Thermal Insulation for Circular Pipes First Edition CEN EN ISO 8497: 1996

ISO ISO

8498 8499

Woven Fabrics - Description of Defects - Vocabulary First Edition Knitted fabrics Description of defects Vocabulary ╔toffes Ó mailles Description des dÚfauts Vocabulaire Second Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Visual Assessment of Surface Cleanliness - Part 1: Rust Grades and Preparation Grades of Uncoated Steel Substrates and of Steel Substrates After Overall Removal of Previous Coatings PrÚparation des subjectiles d'acier avant application de peintures et de produits assimilÚs - ╔valuation visuelle de la propretÚ d'un subjectile - Partie 1: DegrÚs de rouille et degrÚs de prÚparation des subjectiles d'acier non recouverts et des subjectiles d'acier apr×s dÚcapage sur toute la surface des revÛtements prÚcÚdents Second Edition

ISO

8501-1

ISO

8501-2

ISO

8501-3

Preparation of Steel Substrates Before Application of Paints and Related Products - Visual Assessment of Surface Cleanliness - Part 2: Preparation Grades of Previously Coated Steel Substrates After Localized Removal of Previous Coatings First Edition Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 3: Preparation grades of welds, edges and other areas with surface imperfections Second Edition

ISO

8501-4

Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting First Edition

ISO

8502-2

ISO

8502-3

ISO

8502-4

ISO

8502-5

ISO

8502-6

ISO

8502-8

ISO

8502-9

ISO

8502-11

Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 2: Laboratory determination of chloride on cleaned surfaces Second Edition; Corrected and Reprinted: 01/15/2006 Preparation of Steel Substrates Before Application of Paint and Related Products - Tests for the Assessment of Surface Cleanliness Part 3: Assessment of Dust on Steel Surfaces Prepared for Painting (Pressure-Sensitive Tape Method) First Edition; (Corrected and Reprinted - 1993) Preparation of Steel Substrates Before Application of Paint and Related Products - Tests for the Assessment of Surface Cleanliness Part 4: Guidance on the Estimation of the Probability of Condensation Prior to Paint Application First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 5: Measurement of Chloride on Steel Surfaces Prepared for Painting (Ion Detection Tube Method) First Edition Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method Second Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 8: Field Method for the Refractometric Determination of Moisture First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 9: Field Method for the Conductometric Determination of Water-Soluble Salts First Edition; Corrected and Reprinted 12/15/1999 Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 11: Field method for the turbidimetric determination of water-soluble sulfate First Edition

ISO

8502-12

ISO

8503-1

ISO

8503-2

ISO

8503-3

ISO

8503-4

ISO

8503-5

ISO

8504-1

ISO

8504-2

ISO ISO

8504-3 8507

ISO ISO ISO ISO ISO

8510-1 8510-2 8511 8512-1 8512-2

ISO

8513

ISO ISO ISO

8514-1 8514-2 8516

Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 12: Field method for the titrimetric determination of water-soluble ferrous ions First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of BlastCleaned Steel Substrates - Part 1: Specifications and Definitions for ISO Surface Profile Comparators for the Assessment of Abrasive Blast-Cleaned Surfaces First Edition; (CEN EN ISO 8503-1: 1995) Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of BlastCleaned Steel Substrates - Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel Comparator Procedure First Edition; CEN EN ISO 8503-2: 1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of BlastCleaned Steel Substrates - Part 3: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of Surface Profile - Focusing Microscope Procedure First Edition; (CEN EN ISO 8503-3: 1995) Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of BlastCleaned Steel Substrates - Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of Surface Profile - Stylus Instrument Procedure First Edition (CEN EN ISO 8503-4: 1995) Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned steel substrates Part 5: Replica tape method for the determination of the surface profile First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 1: General Principles Second Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 2: Abrasive Blast-Cleaning second edition Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 3: Hand- and Power-Tool Cleaning First Edition Agglomerated Cork Discs - Test Methods Second Edition Adhesives - Peel Test for a Flexible-Bonded-to- Rigid Test Specimen Assembly - Part 1: 90 Degree Peel First Edition; (CEN EN 28510-1: 1993) Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 2: 180░ peel Second Edition Rubber Compounding Ingredients - Carbon Black - Determination of Pellet Size Distribution Second Edition Surface Plates - Part 1: Cast Iron First Edition Surface Plates - Part 2: Granite First Edition Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of Longitudinal Tensile Properties First Edition Micrographics - Alphanumeric Computer Output Microforms - Quality Control - Part 1: Characteristics of the Test Slide and Test Data Second Edition Micrographics - Alphanumeric Computer Output Microforms - Quality Control - Part 2: Method Second Edition Textile Glass - Textured Yarns - Basis for a Specification First Edition

ISO

8518

ISO ISO

8521 8524

ISO

8526-1

ISO

8526-2

ISO ISO

8528-1 8528-2

ISO

8528-3

ISO ISO ISO

8528-4 8528-5 8528-6

ISO

8528-7

ISO

8528-8

ISO

8528-9

ISO

8528-10

ISO ISO

8528-12 8529-1

ISO

8529-2

ISO ISO ISO ISO

8529-3 8530 8531 8532

Workplace Air - Determination of Particulate Lead and Lead Compounds - Flame or Electrothermal Atomic Absorption Spectrometric Method Second Edition Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Apparent Initial Circumferential Tensile Strength First Edition Equipment for Distributing Granulated Pesticides or Herbicides - Test Method First Edition Modular Units for Machine Tools - Workholding Pallets - Part 1: Workholding Pallets up to 800 mm Nominal Size First Edition Modular Units for Machine Tools - Workholding Pallets - Part 2: Workholding Pallets of Nominal Size Greater Than 800 mm First Edition; Corrigendum 1: 1992 Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance Second Edition Reciprocating internal combustion engine driven alternating current generating sets Part 2: Engines Second Edition Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets Second Edition Reciprocating internal combustion engine driven alternating current generating sets Part 4: Controlgear and switchgear Second Edition Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets Second Edition Reciprocating internal combustion engine driven alternating current generating sets Part 6: Test methods Second Edition Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 7: Technical Declarations for Specification and Design First Edition Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 8: Requirements and Tests for LowPower Generating Sets First Edition Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 9: Measurement and Evaluation of Mechanical Vibrations First Edition Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 10: Measurement of Airbourne Noise by the Enveloping Surface Method First Edition Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 12: Emergency Power Supply to Safety Services First Edition Reference Neutron Radiations - Part 1: Characteristics and Methods of Production First Edition Reference Neutron Radiations - Part 2: Calibration Fundamentals of Radiation Protection Devices Related to the Basic Quantities Characterizing the Radiation Field First Edition Reference Neutron Radiations - Part 3: Calibration of Area and Personal Dosimeters and Determination of their Response as a Function of Neutron Energy and Angle of Incidence First Edition Manganese and Chromium Ores - Experimental Methods for Checking the Precision of Sample Division First Edition Manganese and Chromium Ores - Experimental Methods for Checking the Precision of Moisture Determination First Edition Securities - Format for Transmission of Certificate Numbers Second Edition

ISO ISO

8533 8534

ISO

8535-1

ISO ISO

8535-2 8536-1

Glass-reinforced thermosetting plastics (GRP) pipes and fittings Test methods to prove the design of cemented or wrapped joints First Edition Animal and Vegetable Fats and Oils - Determination of Water Content - Karl Fischer Method First Edition Diesel engines Steel tubes for highpressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes Fourth Edition Compression-Ignition Engines - Steel Tubes for High-Pressure Fuel Injection Pipes - Part 2: Requirements for Composite Tubes Second Edition Infusion Equipment for Medical Use - Part 1: Infusion Glass Bottles Third Edition

ISO ISO ISO ISO ISO

8536-2 8536-3 8536-4 8536-5 8536-6

Infusion Equipment for Medical Use - Part 2: Closures for Infusion Bottles Second Edition; Technical Corrigendum 1; 2/01/2003 Infusion Equipment for Medical Use - Part 3: Aluminium Caps for Infusion Bottles Second Edition Infusion equipment for medical use ù Part 4: Infusion sets for single use, gravity feed Fourth Edition Infusion equipment for medical use Part 5: Burette infusion sets for single use, gravity feed Second Edition Infusion Equipment for Medical Use - Part 6: Freeze Drying Closures for Infusion Bottles First Edition

ISO ISO ISO

8536-7 8536-8 8536-9

Infusion Equipment for Medical Use - Part 7: Caps Made of Aluminium-Plastics Combinations for Infusion Bottles Second Edition Infusion Equipment for Medical Use - Part 8: Infusion equipment for use with pressure infusion apparatus First Edition Infusion equipment for medical use Part 9: Fluid lines for use with pressure infusion equipment First Edition

ISO ISO ISO ISO

8536-10 8536-11 8536-12 8537

ISO ISO ISO

8538 8539 8540

Infusion equipment for medical use Part 10: Accessories for fluid lines for use with pressure infusion equipment First Edition Infusion equipment for medical use Part 11: Infusion filters for use with pressure infusion equipment First Edition Infusion equipment for medical use ù Part 12: Check valves First Edition Sterile Single-Use Syringes, with or without Needle, for Insulin First Edition; Amendment 1: 11/01/2000 Aerospace - Nuts, Hexagonal, Self-Locking with Counterbore and Captive Washer, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition Forged Steel Lifting Components for Use with Grade T(8) Chain First Edition Open Front Mechanical Power Presses - Vocabulary First Edition

ISO

8541

ISO ISO ISO ISO ISO

8542 8543 8548-1 8548-2 8548-3

Manganese and Chromium Ores - Experimental Methods for Checking the Bias of Sampling and Sample Preparation First Edition Manganese and Chromium Ores - Experimental Methods for Evaluation of Quality Variation and Methods for Checking the Precision of Sampling First Edition Textile Floor Coverings - Methods for Determination of Mass Second Edition Prosthetics and Orthotics - Limb Deficiencies - Part 1: Method of Describing Limb Deficiencies Present at Birth First Edition Prosthetics and Orthotics - Limb Deficiencies - Part 2: Method of Describing Lower Limb Amputation Stumps First Edition Prosthetics and Orthotics - Limb Deficiencies - Part 3: Method of Describing Upper Limb Amputation Stumps First Edition

ISO

8548-4

ISO

8548-5

ISO

8549-1

ISO ISO

8549-2 8549-3

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

8551 8552 8553 8556 8557 8558 8559 8560 8562 8563 8565 8566-1 8566-2 8566-3 8566-4 8566-5

ISO

8567 CORR 1

ISO ISO

8567 8568

ISO ISO

8569 8570

ISO

8571-1

Prosthetics and Orthotics - Limb Deficiencies - Part 4: Description of Casual Conditions Leading to Amputation First Edition Prosthetics and orthotics Limb deficiencies Part 5: Description of the clinical condition of the person who has had an amputation First Edition Prosthetics and Orthotics - Vocabulary - Part 1: General Terms for External Limb Prostheses and External Orthoses First Edition Prosthetics and Orthotics - Vocabulary - Part 2: Terms Relating to External Limb Prostheses and Wearers of These Prostheses First Edition Prosthetics and Orthotics - Vocabulary - Part 3: Terms Relating to External Orthoses First Edition Prosthetics and orthotics Functional deficiencies Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis First Edition Milk Estimation of psychrotrophic microorganisms Colony-count technique at 21 ░C (Rapid method) First Edition; IDF 132 Milk Enumeration of microorganisms Plate-loop technique at 30 ░C First Edition; IDF 131 Aluminium Ores - Determination of Phosphorus Content - Molybdenum Blue Spectrophotometric Method First Edition Aluminium Ores - Determination of Hygroscopic Moisture in Analytical Samples - Gravimetric Method First Edition Aluminium Ores - Preparation of Pre-Dried Test Samples First Edition Garment Construction and Anthropometric Surveys - Body Dimensions First Edition Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and Grids First Edition Cycles - Stem Wedge Angle First Edition Propylene and Butadiene for Industrial Use - Sampling in the Liquid Phase First Edition Metals and Alloys - Atmospheric Corrosion Testing - General Requirements for Field Tests First Edition Cranes - Cabins - Part 1: General First Edition Cranes - Cabins - Part 2: Mobile Cranes First Edition Cranes - Cabins - Part 3: Tower Cranes First Edition Cranes - Cabins - Part 4: Jib Cranes First Edition Cranes - Cabins - Part 5: Overhead Travelling and Portal Bridge Cranes First Edition Cinematography ù Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints ù Position and dimensions TECHNICAL CORRIGENDUM 1 Second Edition Cinematography ù Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints ù Position and dimensions Second Edition Mechanical shock ù Testing machines ù Characteristics and performance Second Edition Mechanical Vibration and Shock - Measurement and Evaluation of Shock and Vibration Effects on Sensitive Equipment in Buildings Second Edition Plastics - Film and Sheeting - Determination of Cold-Crack Temperature First Edition Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 1: General Introduction First Edition; Amendment 1: 1992; Amendment 2: 1993; Corrigendum 1: 1991

ISO

8571-2

ISO

8571-3

ISO

8571-4

ISO

8571-5

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

8572 8573-1 8573-2 8573-3 8573-4 8573-5 8573-6 8573-7 8573-8 8573-9 8574 8575 8576 8577

ISO ISO

8578 8579-1

ISO

8579-2

ISO ISO

8580 8581

ISO

8583-1

ISO

8583-2

Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 2: Virtual Filestore Definition First Edition; Amendment 1: 1992; Amendment 2: 1993; Corrigendum 1: 1991 Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 3: File Service Definition First Edition; Amendment 1- 1992; Amendment 2- 1993; Corrigendum 1- 1991; Corrigendum 2- 1992 Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 4: File Protocol Specification First Edition; Amendment 4: 11-15-1992; Corrigendum 1: 10-15-1992; Amendment 1: 12-15-1992; Amendment 2: 08-151993; Corrigendum 1 to Amendment 4: 04-01-1995 Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 5: Protocol Implementation Conformance Statement Proforma First Edition; AS/NZS 3646.5: 1994 Pipes and Fittings Made of Glass-Reinforced Thermosetting Plastics (GRP) - Definitions of Terms Relating to Pressure, Including Relationships Between Them, and Terms for Installation and Jointing First Edition Compressed Air - Part 1: Contaminants and Purity Classes Second Edition; Corrigendum 1 4/1/2002 Compressed air ù Part 2: Test methods for oil aerosol content Second Edition Compressed Air - Part 3: Test Methods for Measurement of Humidity First Edition Compressed Air - Part 4: Test Methods for Solid Particle Content First Edition; Technical Corrigendum:4/01/2002 Compressed Air - Part 5: Test Methods for Oil Vapour and Organic Solvent Content First Edition Compressed air Part 6: Test methods for gaseous contaminant content First Edition Compressed air Part 7: Test method for viable microbiological contaminant content First Edition Compressed air Part 8: Test methods for solid particle content by mass concentration First Edition Compressed air Part 9: Test methods for liquid water content First Edition Aerospace Hydraulic system tubing Qualification tests for bent tubes Second Edition Aerospace - Fluid Systems - Hydraulic System Tubing First Edition Optics and Optical Instruments - Microscopes - Reference System of Polarized Light Microscopy First Edition Optics and Optical Instruments - Microscopes - Spectral Filters First Edition Optics and Optical Instruments - Microscopes - Marking of Objectives and Eyepieces First Edition; Technical Corrigendum 1: 11/01/2002 Acceptance Code for Gears - Part 1: Test Code for Airborne Sound Second Edition Acceptance Code for Gears - Part 2: Determination of Mechanical Vibrations of Gear Units During Acceptance Testing First Edition Rubber and Plastics Hoses - Determination of Ultra-Violet Resistance Under Static Conditions First Edition; (CEN EN ISO 8580: 1995) Photography - Electronic Flash Equipment - Connectors to Synchro-Cord First Edition Financial transaction card originated messages Interchange message specifications Part 1: Messages, data elements and code values First Edition Financial Transaction Card Originated Messages - Interchange Message Specifications - Part 2: Application and Registration Procedures for Institution Identification Codes (IIC) First Edition

Financial transaction card originated messages Interchange message specifications Part 3: Maintenance procedures for messages, data elements and code values Second Edition Sensory Analysis - General Guidance for the Selection, Training and Monitoring of Assessors - Part 1: Selected Assessors First Edition Sensory Analysis - General Guidance for the Selection, Training and Monitoring of Assessors - Part 2: Experts First Edition Sensory analysis Methodology Ranking Second Edition Sensory Analysis - Methodology -A" -"Not A" Test First Edition" Sensory Analysis - General Guidance for the Design of Test Rooms First Edition Cinematography - Audio Records on 70 mm Motion-Picture Release Prints with Magnetic Stripes - Recorded Characteristic Second Edition Aerospace - Wrought Aluminium and Aluminium Alloys - Inspection, Testing and Supply Requirements - Part 1: General Requirements First Edition

ISO

8583-3

ISO ISO ISO ISO ISO

8586-1 8586-2 8587 8588 8589

ISO

8590

ISO

8591-1

ISO

8596

ISO ISO ISO

8597 8598 8600-1

ISO

8600-2

ISO

8600-3

ISO

8600-4

ISO ISO ISO

8600-5 8600-6 8601

Ophthalmic Optics - Visual Acuity Testing - Standard Optotype and Its Presentation First Edition; (CEN EN ISO 8596: 1996) Optics and Optical Instruments - Visual Acuity Testing - Method of Correlating Optotypes (CEN EN ISO 8597: 1996) First Edition; Corrigendum 1: 1995 Optics and Optical Instruments - Focimeters First Edition; Technical Corrigendum 1-1998 Optics and photonics Medical endoscopes and endotherapy devices Part 1: General requirements Second edition Optics and Optical Instruments - Medical Endoscopes and Endoscopic Accessories - Part 2: Particular Requirements for Rigid Bronchoscopes First Edition Optics and optical instruments Medical endoscopes and endoscopic accessories Part 3: Determination of field of view and direction of view of endoscopes with optics First Edition; AMENDMENT 1: 12/01/2003 Optics and Optical Instruments - Medical Endoscopes and Certain Accessories - Part 4: Determination of Maximum Width of Insertion Portion First Edition Optics and photonics Medical endoscopes and endotherapy devices Part 5: Determination of optical resolution of rigid endoscopes with optics First edition Optics and photonics Medical endoscopes and endotherapy devices Part 6: Vocabulary First edition Data Elements and Interchange Formats - Information Interchange - Representation of Dates and Times Third Edition

ISO ISO ISO ISO ISO

8602 8603 8604 8605 8606

Information Technology - Protocol for Providing the OSI Connectionless-Mode Transport Service Second Edition; Amendment 1-1996 Solid Fertilizers - Determination of Urea Nitrogen Content - Gravimetric Method Using Xanthydrol First Edition Plastics - Prepregs - Definitions of Terms and Symbols for Designations First Edition Textile-Glass-Reinforced Plastics - Sheet Moulding Compound (SMC) - Basis for a Specification Second Edition Plastics - Prepregs - Bulk Moulding Compound (BMC) and Dough Moulding (DMC) - Basis for a Specification First Edition

ISO

8607

Artificial Insemination of Animals - Frozen Semen of Breeding Bulls - Enumeration of Living Aerobic Microorganisms First Edition

ISO

8608

ISO ISO

8611-1 8612

ISO

8613-1

ISO

8613-2

ISO

8613-3

ISO

8613-4

ISO

8613-5

ISO

8613-6

ISO

8613-7

ISO

8613-8

ISO

8613-9

ISO

8613-10

ISO

8613-11

ISO

8613-12

ISO ISO ISO

8613-14 8614 8619

ISO ISO ISO

8622 8623 8624

Mechanical Vibration - Road Surface Profiles - Reporting of Measured Data First Edition Pallets for materials handling Flat pallets Part 1: Test methods First Edition; Together with ISO 8611-2 and ISO 8611-3, cancels and replaces ISO 8611:1991 Ophthalmic Instruments - Tonometers First Edition Information Technology - Open Document Architecture (ODA) and Interchange Format: Introduction and General Principles Second Edition; Technical Corrigendum 1: 12-15-1998 Information Technology - Open Document Architecture (ODA) and Interchange Format: Document Structures Second Edition; Technical Corrigendum 1: 12-15-1998; Technical Corrigendum 2: 12-15-198 Information Technology - Open Document Architecture (ODA) and Interchange Format: Abstract Interface for the Manipulation of ODA Documents First Edition Information Technology - Open Document Architecture (ODA) and Interchange Format: Document Profile Second Edition; Technical Corrigendum 1: 12-15-1998; Technical Corrigendum 2: 12-15-1998 Information Technology - Open Document Architecture (ODA) and Interchange Format: Open Document Interchange Format Second Edition; Technical Corrigendum 1: 12-15-1998; Technical Corrigendum 2: 12-15-1998 Information Technology - Open Document Architecture (ODA) and Interchange Format: Character Content Architectures Second Edition; Technical Corrigendum 1: 12-15-1998 Information Technology - Open Document Architecture (ODA) and Interchange Format: Raster Graphics Content Architectures Second Edition; Amendment 1: 12-15-1998; Technical Corrigendum 1: 12-15-1998 Information Technology - Open Document Architecture (ODA) and Interchange Format: Geometric Graphics Content Architectures Second Edition Information Technology - Open Document Architecture (ODA) and Interchange Format: Audio Content Architectures First Edition Information Technology - Open Document Architecture (ODA) and Interchange Format - Part 10: Formal Specifications Second Edition Information Technology - Open Document Architecture (ODA) and Interchange Format: Tabular Structures and Tabular Layout First Edition Information Technology - Open Document Architecture (ODA) and Interchange Format: Identification of Document Fragments First Edition Information Technology - Open Document Architecture (ODA) and Interchange Format: Temporal Relationships and Non-Linear Structures First Edition Ski Bindings - Vocabulary Fixations De Ski - Vocabulaire First Edition Plastics - Phenolic Resin Powder - Determination of Flow Distance on a Heated Glass Plate Third Edition Cinematography - Magnetic Sound Records on 70 mm Motion-Picture Release Prints with Magnetic Stripes - A-Chain Reproduction Characteristics Second Edition Tall-Oil Fatty Acids for Paints and Varnishes - Specifications and Test Methods First Edition Ophthalmic Optics - Spectacle Frames Measuring System and Terminology Second Edition

ISO ISO ISO ISO

8625-1 8625-2 8625-3 8626

ISO

8630-1

ISO

8630-2

ISO ISO

8630-3 8631

ISO

8632-1

ISO

8632-3

ISO ISO

8632-4 8634

ISO ISO

8636-1 8636-2

ISO

8637

ISO

8638

ISO

8639

ISO

8640-1

ISO

8640-2

Aerospace - Fluid Systems - Vocabulary - Part 1: General Terms and Definitions Relating to Pressure First Edition Aerospace - Fluid Systems - Vocabulary - Part 2: General Terms and Definitions Relating to Flow First Edition Aerospace - Fluid Systems - Vocabulary - Part 3: General Terms and Definitions Relating to Temperature First Edition Servo-Hydraulic Test Equipment for Generating Vibration - Method of Describing Characteristics First Edition Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 13 262 ftprad, on 80 Tracks on Each Side - Part 1: Dimensional, Physical and Magnetic Characteristics First Edition; CEN EN 28630-1: 1992 Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 13 262 ftprad, on 80 Tracks on Each Side - Part 2: Track Format A for 99 Tracks First Edition; Corrigendum 1-1992; CEN EN 28630-2: 1992 Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 13 262 ftprad, on 80 Tracks on Each Side - Part 3: Track Format B for 80 Tracks First Edition; Corrigendum 1-1992; CEN EN 28630-3: 1992 Information Technology - Program Constructs and Conventions for Their Representation Second Edition Information Technology - Computer Graphics - Metafile for the Storage and Transfer of Picture Description Information - Part 1: Functional Specification Second Edition; Technical Corrigendum 1: 04/01/2006 Information Technology - Computer Graphics - Metafile for the Storage and Transfer of Picture Description Information - Part 3: Binary Encoding Second Edition Information Technology - Computer Graphics - Metafile for the Storage and Transfer of Picture Description Information - Part 4: Clear Text Encoding Second Edition Solid Fertilizers - Sampling Plan for the Evaluation of a Large Delivery First Edition Machine Tools - Test Conditions for Bridge-Type Milling Machines - Testing of the Accuracy - Part 1: Fixed Bridge (Portal-Type) Machines Second Edition Acceptance Conditions for Plano-Milling Machines - Testing of the Accuracy - Part 2: Gantry-Type Machines First Edition Cardiovascular implants and artificial organs Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators Second Edition Cardiovascular implants and artificial organs Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters Second Edition Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Test Methods for Leaktightness of Flexible Joints First Edition Textile machinery and accessories Flat warp knitting machines Part 1: Vocabulary of basic sctructure and knitting elements MatÚriel pour l'industrie textile Machines Ó tricoter rectilignes Ó mailles jetÚes Partie 1: Vocabulaire de la structure de base et des ÚlÚments de tricotage Second Edition; Bilingual Textile machinery and accessories Flat warp knitting machines Part 2: Vocabulary of warp let-off, fabric take-up and batching MatÚriel pour l'industrie textile Machines Ó tricoter rectilignes Ó mailles jetÚes Partie 2: Vocabulaire du dÚroulement de la cha¯ ne, de l'enroulement et du chargement du tissu Second Edition; Bilingual

Textile Machinery and Accessories - Flat Warp Knitting Machines - Part 3: Vocabulary of Patterning Devices Materiel Pour L'Industrie Textile - Machines A Tricoter Rectilignes A Mailles Jetees - Partie 3: Vocabulaire Des Dispositifs a Dessin First Edition Aerospace - Self-Locking Nuts with Maximum Operating Temperature Greater Than 425 Degrees Celsius - Procurement Specification First Edition Aerospace - Self-Locking Nuts with Maximum Operating Temperature Greater Than 425 Degrees Celsius - Test Methods First Edition Earth-Moving Machinery - Hydraulic Excavator and Backhoe Loader Boom-Lowering Control Device - Requirements and Tests Second Edition; BS 6912: Part 1: 1997 Motorcycles Light-alloy wheels Test method Second Edition Mopeds - Light-Alloy Wheels - Test Method First Edition Information Processing Systems - Open Systems Interconnection - Internal Organization of the Network Layer First Edition; Corrigendum 1-1991 Information Technology - Open Systems Interconnection - Service Definition for the Association Control Service Element Second Edition; Amendment 1-1997; Amendment 2-1998 Information Technology - Open Systems Interconnection - Protocol Specification for the Association Control Service Element: Protocol Implementation Conformance Statement (PICS) Proforma Second Edition Information Processing Systems - Computer Graphics - Graphical Kernel System (GKS) Language Bindings - Part 1: FORTRAN First Edition Information Processing Systems - Computer Graphics - Graphical Kernel System (GKS) Language Bindings - Part 2: Pascal First Edition Information Processing Systems - Computer Graphics - Graphical Kernel System (GKS) Language Bindings - Part 3: ADA First Edition

ISO

8640-3

ISO

8641

ISO

8642

ISO ISO ISO

8643 8644 8645

ISO

8648

ISO

8649

ISO

8650-2

ISO

8651-1

ISO

8651-2

ISO

8651-3

ISO ISO ISO ISO ISO

8651-4 8652 AMD 1 8652 8653 8654

Information Technology - Computer Graphics - Graphical Kernel System (GKS) Language Bindings - Part 4: C Second Edition Information technology ù Programming languages ù Ada AMENDMENT 1 Second Edition Information Technology - Programming Languages - Ada Technical Corrigendum 1:06/01/2001 Jewellery - Ring-Sizes - Definition, Measurement and Designation First Edition; (CEN EN 28653: 1992) Colours of Gold Alloys - Definition, Range of Colours and Designation First Edition; (CEN EN 28654: 1992)

ISO ISO ISO ISO ISO

8655-1 8655-2 8655-3 8655-4 8655-5

Piston-Operated Volumetric Apparatus - Part 1: Terminology, General Requirements and User Recommendations First Edition Piston-Operated Volumetric Apparatus - Part 2: Piston Pipettes First Edition Piston-Operated Volumetric Apparatus - Part 3: Piston Burettes First Edition Piston-Operated Volumetric Apparatus - Part 4: Dilutors First Edition Piston-Operated Volumetric Apparatus - Part 5: Dispensers First Edition

ISO

8655-6

Piston-Operated Volumetric Apparatus - Part 6: Gravimetric Methods for the Determination of Measurement Error First Edition

ISO ISO

8655-7 8656-1

ISO ISO ISO ISO

8658 8659 8660 8661

ISO

8662-1

ISO

8662-2

ISO

8662-3

ISO

8662-4

ISO

8662-5

ISO

8662-6

ISO

8662-7

ISO ISO ISO

8662-8 8662-9 8662-10

ISO

8662-11

ISO

8662-12

ISO

8662-13

ISO

8662-14

Piston-operated volumetric apparatus Part 7: Non-gravimetric methods for the assessment of equipment performance First Edition Refractory Products - Sampling of Raw Materials and Unshaped Products - Part 1: Sampling Scheme First Edition Carbonaceous Materials for Use in the Production of Aluminium - Green and Calcined Coke - Determination of Trace Elements by Flame Atomic Absorption Spectroscopy First Edition Thermoplastics Valves - Fatigue Strength - Test Method First Edition Plastics - Determination of Permanganate Absorption Number of Caprolactam - Spectrometric Method Second Edition Caprolactam for Industrial Use - Determination of Volatile Bases Content - Titrimetric Method After Distillation First Edition Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 1: General First Edition; (Corrected and Reprinted 1988) (CEN EN 28662-1: 1992) Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 2: Chipping Hammers and Riveting Hammers Amendment 1 10-15-1999 Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 3: Rock Drills and Rotary Hammers Amendment 1: 10/15/1999 Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 4: Grinders First Edition; (CEN EN ISO 8662-4: 1995) Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 5: Pavement Breakers and Hammers for Construction Work Amendment 1 10-15-1999 Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 6: Impact Drills First Edition; (CEN EN ISO 86626: 1995) Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 7: Wrenches, Screwdrivers and Nut Runners with Impact, Impulse or Ratchet Action First Edition Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 8: Polishers and Rotary, Orbital and Random Orbital Sanders First Edition Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 6: Rammers First Edition Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 10: Nibblers and Shears First Edition Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 11: Fastener Driving Tools First Edition; Amendment 1 12/01/2001 Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 12: Saws and Files with Reciprocating Action and Saws with Oscillating or Rotating Action First Edition Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 13: Die Grinders First Edition; Technical Corrigendum 1-1998 Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 14: Stone-Working Tools and Needle Scalers First Edition

ISO

8664

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

8665 8666 8667 8668-1 8668-2 8668-3 8668-4 8668-5 8668-6 8669-1 8669-2 8670-1 8670-2 8670-3

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

8672 8673 8674 8675 8676 8678 8681 8682 8683 8685 8686-1 8686-2 8686-3 8686-4

ISO

8686-5

ISO

8687

Tyres for agricultural tractors and machines Code-designated and service-description marked radial drive-wheel tyres Second edition Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations Third Edition Small craft Principal data First edition Commercial Vehicles and Buses - Cross-Tooth Gearbox Flanges, Type T Second Edition Aircraft - Terminal Junction Systems - Part 1: Characteristics First Edition Aircraft - Terminal Junction Systems - Part 2: Tests First Edition Aircraft - Terminal Junction Systems - Part 3: Detail Specification for Type 1 System First Edition Aircraft - Terminal Junction Systems - Part 4: Detail Specification for Type 2 System First Edition Aircraft - Terminal Junction Systems - Part 5: Detail Specification for Type 3 System First Edition Aircraft - Terminal Junction Systems - Part 6: Detail Specification for Type 4 System First Edition Urine Collection Bags Part 1: Vocabulary First Edition Urine Collection Bags - Part 2: Requirements and Test Methods Second Edition Ostomy Collection Bags Part 1: Vocabulary First Edition Ostomy Collection Bags - Part 2: Requirements and Test Methods Second Edition Ostomy Collection Bags - Part 3: Determination of Odour Transmission of Colostomy and Ileostomy Bags First Edition Air Quality - Determination of the Number Concentration of Airborne Inorganic Fibres by Phase Contrast Optical Microscopy Membrane Filter Method First Edition Hexagon Nuts, Style 1, with Metric Fine Pitch Thread - Product Grades A and B Second Edition Hexagon Nuts, Style 2, with Metric Fine Pitch Thread - Product Grades A and B Second Edition Hexagon Thin Nuts (Chamfered) with Metric Fine Pitch Thread - Product Grades A and B Second Edition Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B Second Edition Cup Head Square Neck Bolts with Small Head and Short Neck - Product Grade B First Edition Petroleum Products and Lubricants - Method of Classification - Definition of Classes First Edition Apples - Storage in Controlled Atmospheres First Edition Lettuce - Guide to Precooling and Refrigerated Transport First Edition Aluminium Ores - Sampling Procedures First Edition Cranes - Design Principles for Loads and Load Combinations - Part 1: General First Edition Cranes Design principles for loads and load combinations Part 2: Mobile cranes First Edition Cranes - Design Principles for Loads and Load Combinations - Part 3: Tower Cranes First Edition Cranes Design principles for loads and load combinations Part 4: Jib cranes First Edition Cranes - Design Principles for Loads and Load Combinations - Part 5: Overhead Travelling and Portal Bridge Cranes First Edition Cinematography - Signal-to-Noise Ratio of 8 mm Type S, 16 mm and 35 mm Variable-Area Photographic Sound Records - Method of Measurement First Edition

ISO ISO

8688-1 8688-2

ISO

8689-1

ISO

8689-2

ISO

8690

ISO ISO ISO ISO ISO

8691 8692 8693 8694 8695

ISO ISO ISO ISO ISO ISO

8697 8705 8706 8709 8710 8713

ISO ISO ISO ISO ISO ISO ISO

8714 8715 8716 8717 8718 8720 8721

ISO ISO ISO ISO ISO ISO

8723 8724 8727 8728 8729 8733

Tool Life Testing in Milling - Part 1: Face Milling First Edition Tool Life Testing in Milling - Part 2: End Milling First Edition Water Quality - Biological Classification of Rivers - Part 1: Guidance on the Interpretation of Biological Quality Data from Surveys of Benthic Macroinvertebrates First Edition Water Quality - Biological Classification of Rivers - Part 2: Guidance on the Presentation of Biological Quality Data from Surveys of Benthic Macroinvertebrates First Edition Decontamination of Radioactively Contaminated Surfaces - Method for Testing and Assessing the Ease of Decontamination First Edition Petroleum Products - Low Levels of Vanadium in Liquid Fuels - Determination by Flameless Atomic Absorption Spectrometry After Ashing First Edition Water quality Freshwater algal growth inhibition test with unicellular green algae Second Edition Tools for Moulding - Flat Ejector Pins Second Edition Tools for Moulding - Shouldered Ejector Pins Second Edition Tools for Pressing - Punches - Nomenclature and Terminology First Edition Crude Petroleum and Petroleum Products - Transfer Accountability - Assessment of on Board Quantity (OBQ) and Quantity Remaining on Board (ROB) First Edition; Supersedes TR 8338: 1988 Mopeds - Measurement method for location of centre of gravity Second Edition Two-Wheeled Mopeds - Parking Stability of Side- and Centre-Stands First Edition Mopeds - Brakes and Braking Devices - Tests and Measurement Methods First Edition; Technical Corrigendum 1-1998 Motorcycles - Brakes and Braking Devices - Tests and Measurement Methods First Edition Electric road vehicles Vocabulary VÚhicules routiers Úlectriques Vocabulaire Second Edition Electric road vehicles Reference energy consumption and range Test procedures for passenger cars and light commercial vehicles Electric Road Vehicles - Road Operating Characteristics First Edition Road Vehicles - Fifth Wheel Kingpins - Strength Test Second Edition Commercial Road Vehicles - Fifth Wheel Couplings - Strength Tests Second Edition Road Vehicles - Drawbar Couplings and Eyes for Hinged Drawbars - Strength Tests Second Edition Passenger Cars - Specifications for Mechanical Jacks First Edition Road Vehicles - Measurement Techniques in Impact Tests - Optical Instrumentation First Edition Carbonaceous Materials for the Production of Aluminium - Calcined Coke - Determination of Oil Content - Method by Solvent Extraction First Edition Cork Decorative Panels - Specification First Edition Mechanical Vibration and Shock - Human Exposure - Biodynamic Coordinate Systems First Edition Ships and Marine Technology - Marine Gyro-Compasses Second Edition Ships and Marine Technology - Marine Radar Reflectors Second Edition Parallel Pins with Internal Thread, of Unhardened Steel and Austenitic Stainless Steel Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

8734 8735 8736 8737 8738 8739 8740 8741 8742 8743 8744 8745 8746 8747 8748 8749 8750 8752 8754 8755 8756

ISO ISO

8758 8759-1

ISO

8759-2

ISO

8760

ISO ISO ISO

8761 8762 8764-1

ISO ISO ISO

8764-2 8765 8768

Parallel Pins, of Hardened Steel and Martensitic Stainless Steel (Dowel Pins) Parallel Pins with Internal Thread, of Hardened Steel and Martensitic Stainless Steel Second Edition Taper Pins with Internal Thread, Unhardened First Edition Taper Pins with External Thread, Unhardened First Edition Plain Washers for Clevis Pins - Product Grade A First Edition Grooved Pins - Full-Length Parallel Grooved, with Pilot Second Edition Grooved Pins - Full-Length Parallel Grooved, with Chamfer Second Edition Grooved Pins - Half-Length Reverse Taper Grooved Second Edition Grooved Pins - One-Third-Length Centre Grooved Second Edition Grooved Pins - Half-Length Centre Grooved Second Edition Grooved Pins - Full-Length Taper Grooved Second Edition Grooved Pins - Half-Length Taper Grooved Second Edition Grooved Pins with Round Head Second Edition Grooved Pins with Countersunk Head Second Edition Spring-type straight pins ù Coiled, heavy duty Third edition Pins and Grooved Pins - Shear Test First Edition Spring-type straight pins ù Coiled, standard duty Third edition Spring-Type Straight Pins, Slotted, Heavy Duty Second Edition Petroleum Products - Determination of Sulfur Content - Energy-Dispersive X-Ray Fluorescence Method Second Edition Commercial Road Vehicles - 40 mm Drawbar Eye - Interchangeability Second Edition Air Quality - Handling of Temperature, Pressure and Humidity Data First Edition Cinematography - Photographic Control and Data Records on 16 mm and 35 mm Motion-Picture Film and Prints - Dimensions and Location First Edition Agricultural Wheeled Tractors - Front-Mounted Equipment - Part 1: Power Take-Off and Three-Point Linkage Second Edition Agricultural Wheeled Tractors - Front-Mounted Equipment - Part 2: Stationary Equipment Connection Second Edition; This Edition is a Complement to ISO 8759-1: 1998, Which is Itself a Technical Revision of ISO 8759: 1985 and ISO 8759-2: 1985 Work-Place Air - Determination of Mass Concentration of Carbon Monoxide - Method Using Detector Tubes for Short-Term Sampling with Direct Indication First Edition Work-Place Air - Determination of Mass Concentration of Nitrogen Dioxide - Method Using Detector Tubes for Short-Term Sampling with Direct Indication First Edition Workplace Air - Determination of Vinyl Chloride - Charcoal Tube/Gas Chromatographic Method First Edition Assembly tools for screws and nuts Screwdrivers for cross-recessed head screws Part 1: Driver tips Third Edition Assembly tools for screws and nuts Screwdrivers for cross-recessed head screws Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers Second Edition Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B Second Edition Packaging - Complete, Filled Transport Packages - Toppling Test First Edition; (CEN EN 28768: 1992)

ISO

8769

ISO

8769-2

ISO ISO ISO

8770 8772 8773

ISO ISO ISO ISO

8775 8777 8778 8779

ISO

8780-1

ISO

8780-2

ISO

8780-3

ISO

8780-4

ISO

8780-5

ISO

8780-6

ISO

8781-1

ISO

8781-2

ISO ISO

8781-3 8783

ISO

8784-1

ISO

8785

Reference Sources for the Calibration of Surface Contamination Monitors - Beta-Emitters (Maximum Beta Energy Greater Than 0,15 MeV) and Alpha-Emitters First Edition Reference Sources for the Calibration of Surface Contamination Monitors - Part 2: Electrons of Energy Less Than 0,15 MeV and Photons of Energy Less Than 1,5 MeV First Edition Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polyethylene (PE) Second Edition Plastics piping systems for non-pressure underground drainage and sewerage Polyethylene (PE) Second Edition Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene (PP) Second Edition Aerospace - Gaseous Oxygen Replenishment Connection for Use in Fluid Systems (New Type) - Dimensions (Inch Series) First Edition Information and Documentation - Commands for Interactive Text Searching First Edition Pneumatic Fluid Power - Standard Reference Atmosphere Second Edition Polyethylene (PE) Pipes for Irrigation Laterals - Specifications Second Edition Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 1: Introduction First Edition; (CEN EN ISO 8780-1: 1995) Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 2: Dispersion Using an Oscillatory Shaking Machine First Edition; (CEN EN ISO 8780-2: 1995) Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 3: Dispersion Using a HighSpeed Impeller Mill First Edition Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 4: Dispersion Using a Bead Mill First Edition; (CEN EN ISO 8780-4: 1995) Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 5: Dispersion Using an Automatic Muller First Edition; (CEN EN ISO 8780-5: 1995) Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 6: Dispersion Using a TripleRoll Mill First Edition; (CEN EN ISO 8780-6: 1995) Pigments and Extenders - Methods of Assessment of Dispersion Characteristics - Part 1: Assessment from the Change in Tinting Strength of Coloured Pigments First Edition Pigments and Extenders - Methods of Assessment of Dispersion Characteristics - Part 2: Assessment from the Change in Fineness of Grind First Edition; (CEN EN ISO 8781-2: 1995) Pigments and Extenders - Methods of Assessment of Dispersion Characteristics - Part 3: Assessment from the Change in Gloss First Edition Alpine Skis - Guidelines for Conducting Slope Performance Tests First Edition Pulp, paper and board Microbiological examination - Part 1: Total count of bacteria, yeast and mould based on disintegration Second Edition Geometrical Product Specification (GPS) - Surface Imperfections - Terms, Definitions and Parameters Specification Geometrique Des Produits (GPS) - Imperfections De Surface - Termes, Definitions Et Parametres First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

8787 8788 8789 8790 8791-1 8791-2 8791-3 8791-4 8792 8793 8794

ISO

8795

ISO

8796

ISO ISO

8799 8751

ISO

8802-2

ISO

8802-3

ISO

8802-3 DAM 2

ISO

8802-3 DAM 3

ISO

8802-3 DAM 4

Paper and Board - Determination of Capillary Rise - Klemm Method First Edition Aerospace - Nuts, Metric - Tolerances of Form and Position Second Edition Rubber Hoses and Hose Assemblies for Liquefied Petroleum Gas in Motor Vehicles - Specification First Edition Information Processing Systems - Computer System Configuration Diagram Symbols and Conventions First Edition Paper and Board - Determination of Roughness/Smoothness (Air Leak Methods) - Part 1: General Method First Edition Paper and Board - Determination of Roughness/Smoothness (Air Leak Methods) - Part 2: Bendtsen Method First Edition Paper and board Determination of roughness/smoothness (air leak methods) Part 3: Sheffield method Second edition Paper and Board - Determination of Roughness/Smoothness (Air Leak Methods) - Part 4: Print-Surf Method First Edition Wire Ropes Slings - Safety Criteria and Inspection Procedures for Use First Edition Steel Wire Ropes - Ferrule-Secured Eye Terminations First Edition Steel Wire Ropes - Spliced Eye Terminations for Slings First Edition Plastics Piping Systems for the Transport of Water Intended for Human Consumption - Migration Assessment - Determination of Migration Values for Plastics Pipes and Fittings and Their Joints Third Edition Polyethylene PE 32 and PE 40 pipes for irrigation laterals Susceptibility to environmental stress cracking induced by insert-type fittings Test method and requirements Second Edition Surface Active Agents - Sulfated Ethoxylated Alcohols and Alkylphenols - Determination of Content of Unsulfated Matter First Edition; (CEN EN ISO 8799: 1995) Spring-type straight pins ù Coiled, light duty Third edition Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks Specific Requirements - Part 2: Logical Link Control Third Edition; ANSI/IEEE 802.2; Technical Corrigendum 1: 10/01/2000 Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks Specific Requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Sixth Edition; Supersedes IEEE Std. 802.3 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA-CD) Access Method and Physical Layer Specifications Amendment 2: Data Terminal Equipment (DTE) Power Via Media Dependent Interface (MDI) Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications IEEE Std 802.3aj:2003 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications IEEE Std 802.3ak:2004

ISO

8802-5

ISO

8802-6

ISO

8802-11 AMD 6

ISO

8802-11 AMD 5

ISO

8802-11 AMD 4

ISO

8802-11

Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks Specific Requirements - Part 5: Token Ring Access Method and Physical Layer Specifications Third Edition; Amendment 1: 09/15/1998; ANSI/IEEE Std 802.5 Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks Specific Requirements - Part 6: Distributed Queue Dual Bus (DQDB) Access Method and Physical Layer Specifications First Edition; IEEE 802.6: 1994 Information technology ù Telecommunications and information exchange between systems ù Local and metropolitan area networks ù Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications AMENDMENT 6: Medium Access Control (MAC) Security Enhancements Second Edition; Same as IEEE STD 8802.11 Information technology ù Telecommunications and information exchange between systems ù Local and metropolitan area networks ù Specific requirements ù Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications AMENDMENT 5: Spectrum and Transmit Power Management Extensions in the 5 GHz band in Europe Second Edition; Same as IEEE STD 8802.11 Information technology ù Telecommunications and information exchange between systems ù Local and metropolitan area networks ù Specific requirements ù Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications AMENDMENT 4: Further Higher Data Rate Extension in the 2.4 GHz Band Second Edition; Same as IEEE STD 8802.11 Information technology ù Telecommunications and information exchange between systems ù Local and metropolitan area networks ù Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Second Edition; IEEE STD 802.11

ISO

8802-11 DAM 7

ISO

8805

ISO

8806-4

ISO

8807

ISO ISO

8811 8812

Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications AMENDMENT 7: Specifications for Enhanced Security WLAN Authentication and Privacy Infrastructure (WAPI) First Edition Information Processing Systems - Computer Graphics - Graphical Kernel System for Three Dimensions (GKS-3D) Functional Description First Edition Information Technology - Computer Graphics - Graphical Kernel System for Three Dimensions (GKS-3D) Language Bindings - Part 4: C First Edition Information Processing Systems - Open Systems Interconnection - LOTOS - a Formal Description Technique Based on the Temporal Ordering of Observational Behaviour First Edition Earth-Moving Machinery - Rollers and Compactors - Terminology and Commercial Specifications First Edition; Technical Corrigendum 1: 02/01/2002 Earth-Moving Machinery - Backhoe Loaders - Definitions and Commercial Specifications First Edition

ISO

8813

Earth-Moving Machinery - Lift Capacity of Pipelayers and Wheeled Tractors or Loaders Equipped with Side Boom First Edition

ISO ISO ISO

8815 8816 8818

ISO ISO ISO ISO

8819 8820-1 8820-2 8820-3

ISO

8820-4

ISO ISO ISO ISO

8820-5 8820-6 8820-7 8821

ISO

8822

ISO

8823-1

ISO

8823-2

ISO ISO

8824-1 AMD 3 8824-1 CORR 1

ISO

8824-1 AMD 2

ISO ISO

8824-1 AMD 1 8824-1

ISO

8824-2 CORR 1

ISO ISO ISO

8824-2 AMD 1 8824-2 8824-3

Aircraft - Electrical Cables and Cable Harnesses - Vocabulary First Edition; Corrected and Reprinted 10/15/1998 Aircraft - Solid-State Remote Power Controllers - General Requirements First Edition Leisure Accommodation Vehicles - Caravans - 12 V Direct Current Extra Low Voltage Electrical Installations First Edition Liquefied Petroleum Gases - Detection of Hydrogen Sulfide - Lead Acetate Method Second Edition; (CEN EN ISO 8819: 1995) Road Vehicles - Fuse-Links - Part 1: Definitions and General Test Requirements Second Edition Road vehicles Fuse-links Part 2: User┤s guide Second Edition Road vehicles Fuse-links Part 3: Fuse-links with tabs (blade type) Second Edition Road Vehicles - Fuse Links - Part 4: Fuse-Links with Female Contacts (Type A) and Bolt-in Contacts (Type B) and Their Test Fixtures First Edition Road vehicles ù Fuse-links ù Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures First Edition Road vehicles ù Fuse-links ù Part 6: Single-bolt fuse-links First Edition Road vehicles ù Fuse-links ù Part 7: Fuse-links with tabs (Type G) with rated voltage of 450 V First edition Mechanical Vibration - Balancing - Shaft and Fitment Key Convention First Edition; (NZS/ISO 8821: 1989) Information Technology - Open Systems Interconnection - Presentation Service Definition Second Edition; Amendment 1: Efficiency Enhancements: 10-01-1998; Amendment 2: Nested Connections Functional Unit: 12-15-1998 Information Technology - Open Systems Interconnection - Connection-Oriented Presentation Protocol: Protocol Specification Second Edition; Amendment 1: Efficiency Enhancements: 09-15-1998; Amendment 2: Nested Connections Functional Unit: 12-15-1998 Information Technology - Open Systems Interconnection - Connection-Oriented Presentation Protocol: Protocol Implementation Conformance Statement (PICS) Proforma Second Edition Information technology ù Abstract Syntax Notation One (ASN.1): Specification of basic notation AMENDMENT 3: Time type support Third Edition Information technology ù Abstract Syntax Notation One (ASN.1): Specification of basic notation Third Edition Information technology ù Abstract Syntax Notation One (ASN.1): Specification of basic notation AMENDMENT 2: Alignment with changes made to ITU-T Rec. X.660 ISO/IEC 9834-1 for identifiers in object identifier value notation Third Edition Information technology ù Abstract Syntax Notation One (ASN.1): Specification of basic notation AMENDMENT 1: Support for EXTENDED-XER Third Edition Information technology ù Abstract Syntax Notation One (ASN.1): Specification of basic notation Third Edition Information technology ù Abstract Syntax Notation One (ASN.1): Information object specification TECHNICAL CORRIGENDUM 1 Third Edition Information technology ù Abstract Syntax Notation One (ASN.1): Information object specification AMENDMENT 1: Support for EXTENDED-XER Third Edition Information technology ù Abstract Syntax Notation One (ASN.1): Information object specification Third Edition Information Technology - Abstract Syntax Notation One (ASN.1): Constraint Specification Third Edition

ISO

8824-4

ISO

8825-1 AMD 1

ISO

8825-1

ISO

8825-1 FDAM 2

ISO

8825-2 AMD 2

ISO

8825-2 CORR 2

ISO

8825-2 CORR 1

ISO ISO

8825-2 AMD 1 8825-2

ISO

8825-3 AMD 2

ISO

8825-3 CORR 1

ISO ISO

8825-3 AMD 1 8825-3

ISO ISO ISO

8825-4 AMD 2 8825-4 AMD 1 8825-4

ISO ISO ISO ISO ISO ISO

8825-5 CORR 1 8825-5 8826-1 8826-2 8827 8828

ISO

8829-2

Information Technology - Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 Specifications Third Edition Information technology ù ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) AMENDMENT 1: Support for EXTENDED-XER Third Edition Information technology ù ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) Third Edition Information technology ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) Information technology ù ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) ù AMENDMENT 2: Time type support Third Edition Information technology ù ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) TECHNICAL CORRIGENDUM 2 Third Edition Information technology ù ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) TECHNICAL CORRIGENDUM 1 Third Edition Information technology ù ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) AMENDMENT 1: Support for EXTENDED-XER Third Edition Information technology ù ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) Third Edition Information technology ù ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) AMENDMENT 2 First Edition Information technology ù ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) TECHNICAL CORRIGENDUM 1 First Edition Information technology ù ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) AMENDMENT 1: Extensibility support First Edition Information technology ù ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) First Edition Information technology ù ASN.1 encoding rules: XML Encoding Rules (XER) AMENDMENT 2: Time type support First Edition Information technology ù ASN.1 encoding rules: XML Encoding Rules (XER) AMENDMENT 1: EXTENDED-XER First Edition Information technology ù ASN.1 encoding rules: XML Encoding Rules (XER) First Edition Information technology ù ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 TECHNICAL CORRIGENDUM 1 First Edition Information technology ù ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 First Edition Technical Drawings - Rolling Bearings - Part 1: General Simplified Representation First Edition; (CEN EN ISO 8826-1: 1995) Technical Drawings - Rolling Bearings - Part 2: Detailed Simplified Representation First Edition Implants for Surgery - Staples with Parallel Legs for Orthopaedic Use - General Requirements First Edition Implants for Surgery - Guidance on Care and Handling of Orthopaedic Implants First Edition Aerospace Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Part 2: Non-metallic braid First Edition;:1990

ISO ISO ISO

8830 8833 8835-2

High-Speed Steel Machine Taps with Ground Threads - Technical Specifications First Edition Magnetite for Use in Coal Preparation - Test Methods First Edition Inhalational anaesthesia systems - Part 2: Anaesthetic breathing systems Third Edition Inhalational anaesthesia systems ù Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems Second Edition Inhalational anaesthesia systems Part 4: Anaesthetic vapour delivery devices First Edition Inhalational Anaesthesia Systems - Part 5: Anaesthetic Ventilators First Edition Suction Catheters for Use in the Respiratory Tract Third Edition Mechanical Properties of Fasteners - Bolts, Screws, Studs and Nuts Made of Non-Ferrous Metals First Edition Refractory Materials - Determination of Bulk Density of Granular Materials (Grain Density) First Edition Dense, Shaped Refractory Products - Determination of Permeability to Gases First Edition Aircraft - Crimp-removable contacts for electrical connectors - Identification system Second Edition Small Craft with Inboard Engine - Propeller Shaft Ends and Bosses with 1:16 Taper First Edition; Corrigendum 1: 1995

ISO ISO ISO ISO ISO ISO ISO ISO ISO

8835-3 8835-4 8835-5 8836 8839 8840 8841 8843 8845

ISO ISO ISO ISO

8846 8847 8848 8849

ISO

8851-1

ISO

8851-2

Small Craft - Electrical Devices - Protection Against Ignition of Surrounding Flammable Gases First Edition; (CEN EN 28846: 1993) Small Craft - Steering Gear - Cable and Pulley Systems Second Edition Small Craft - Remote Steering Systems First Edition; (CEN EN 28848: 1993) Small craft Electrically operated directcurrent bilge pumps Second Edition Butter Determination of moisture, non-fat solids and fat contents (Routine methods) Part 1: Determination of moisture content First Edition; IDF 191-1: 2004 Butter Determination of moisture, non-fat solids and fat contents (Routine methods) Part 2: Determination of non-fat solids content First Edition; IDF 191-2: 2004

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

8851-3 8853 8854 8855 8858-2 8858-3 8859-1 8859-2 8859-3 8859-4 8859-5 8859-6 8859-7

Butter Determination of moisture, non-fat solids and fat contents (Routine methods) Part 3: Calculation of fat content First Edition Safety Harnesses for Competition Drivers - Requirements and Test Methods First Edition Road Vehicles - Alternators with Regulators - Test Methods and General Requirements First Edition Road Vehicles - Vehicle Dynamics and Road-Holding Ability - Vocabulary First Edition Hard coal Froth flotation testing Part 2: Sequential evaluation First Edition Hard coal Froth flotation testing Part 3: Release evaluation First Edition Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 1: Latin Alphabet No. 1 First Edition Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 2: Latin Alphabet No. 2 First Edition Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 3: Latin Alphabet No.3 First Edition Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 4: Latin Alphabet No. 4 First Edition Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 5: Latin/Cyrillic Alphabet Second Edition Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 6: Latin/Arabic Alphabet First Edition Information technology 8-bit single-byte coded graphic character sets Part 7: Latin/Greek alphabet First Edition

ISO ISO ISO ISO ISO

8859-8 8859-9 8859-10 8859-11 8859-13

Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 8: Latin/Hebrew Alphabet First Edition Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 9: Latin Alphabet No. 5 Second Edition Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 10: Latin Alphabet No. 6 Second Edition Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 11: Latin/Thai Alphabet First Edition Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 13: Latin Alphabet No.7 First Edition

ISO ISO ISO

8859-14 8859-15 8859-16

ISO

8860-1

ISO

8860-2

Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 14: Latin Alphabet No.8 (Celtic) First Edition Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 15: Latin Alphabet No. 9 First Edition Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 16: Latin Alphabet No. 10 First Edition Information Processing - Data Interchange on 90 mm (3.5 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftprad on 80 Tracks on Each Side - Part 1: Dimensional, Physical and Magnetic Charactistics First Edition; Corrigendum 1-1990 Information Processing - Data Interchange on 90 mm (3.5 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftprad on 80 Tracks on Each Side - Part 2: Track Format First Edition; Corrigendum 1-1990

ISO

8861

ISO ISO ISO ISO ISO

8862 8863 8864 8866 8868

ISO

8870

ISO

8871-1

ISO

8871-2 AMD 1

ISO

8871-2

ISO

8871-3

ISO

8871-4

Milk and milk-based products Detection of thermonuclease produced by coagulase-positive staphylococci First Edition; IDF 83 Elastomeric parts for parenterals and for devices for pharmaceutical use Part 1: Extractables in aqueous autoclavates First Edition; Together with ISO 8871-2 thru ISO 8871-5 replaces ISO 8871 Elastomeric parts for parenterals and for devices for pharmaceutical use ù Part 2: Identification and characterization AMENDMENT 1 First Edition Elastomeric parts for parenterals and for devices for pharmaceutical use ù Part 2: Identification and characterization First Edition; Together with ISO 8871-1 and ISO 8871-3 thru ISO 8871-5 replaces ISO 8871 Elastomeric parts for parenterals and for devices for pharmaceutical use Part 3: Determination of released-particle count First Edition; Together with ISO 8871-1, ISO 8871-2, ISO 8871-4 and ISO 8871-5 replaces ISO 8871 Elastomeric parts for parenterals and for devices for pharmaceutical use Part 4: Biological requirements and test methods First Edition; Together with ISO 8871-1 thru ISO 8871-3 and ISO 8871-5 replaces ISO 8871: 1990

ISO

8871-5

Elastomeric parts for parenterals and for devices for pharmaceutical use Part 5: Functional requirements and testing First Edition

Shipbuilding - Engine-Room Ventilation in Diesel-Engined Ships - Design Requirements and Basis of Calculations Second Edition Air-Conditioning and Ventilation of Machinery Control-Rooms on Board Ships - Design Conditions and Basis of Calculations First Edition Ship┤s Wheelhouse Windows - Heating by Hot Air of Glass Panes First Edition Air-Conditioning and Ventilation of Wheelhouse on Board Ships - Design Conditions and Basis of Calculations First Edition Rotary Core Diamond Drilling Equipment - System C First Edition; Corrigendum 1: 1991; Corrigendum 2: 1992 Fluorspar - Sampling and Sample Preparation First Edition; Amendment 1-1996

ISO

8872

Aluminium Caps for Transfusion, Infusion and Injection Bottles - General Requirements and Test Methods Second Edition Rigid cellular plastics Spray-applied polyurethane foam for thermal insulation Part 1: Material specifications First Edition; Together with ISO 8873-2 and ISO 8873-3 replaces ISO 8873:1987 [Replaced: ISO 8873] Rigid cellular plastics ù Spray-applied polyurethane foam for thermal insulation ù Part 2: Application First Edition [Replaced: ISO 8873] Rigid cellular plastics ù Spray-applied polyurethane foam for thermal insulation ù Part 3: Test methods First Edition [Replaced: ISO 8873] Grades of Fluorspar - Determination of Moisture Content of a Lot Second Edition Fluorspar - Determination of Particle Size Distribution by Sieving First Edition; Corrigendum 1: 1991

ISO

8873-1

ISO

8873-2

ISO ISO ISO

8873-3 8875 8876

ISO

8877

ISO

8878

ISO

8879

ISO

8881

ISO

8882-1

ISO

8882-2

ISO ISO ISO ISO ISO

8882-3 8886 8889 8890 8892

Information Technology - Telecommunications and Information Exchange between Systems - Interface Connector and Contact Assignments for ISDN Basic Access Interface Located at Reference Points S and T Second Edition; CEN EN 28877: 1993 Information Technology - Telecommunications and Information Exchange between Systems - Use of X.25 to Provide the OSI Connection-Mode Network Service Second Edition; Corrigendum 1-1993; Corrigendum 2-1993; AS/NZS 3604: 1994; Corrigendum 31996; CAN/CSA-ISO/IEC 8878-95 Information Processing - Text and Office Systems - Standard Generalized Markup Language (SGML) First Edition; Amendment 1: 07/01/1988; Technical Corrigendum 1: 12/15/1996; Technical Corrigendum 2: 11/01/1999 Information Processing Systems - Data Communications - Use of the X.25 Packet Level Protocol in Local Area Networks First Edition; Corrigendum 1-1991 Information Technology - Telecommunications and Information Exchange between Systems - X.25 DTE Conformance Testing - Part 1: General Principles Second Edition Information Technology - Telecommunications and Information Exchange between Systems - X.25 DTE Conformance Testing - Part 2: Data Link Layer Conformance Test Suite Third Edition Information Technology - Telecommunications and Information Exchange between Systems - X.25 DTE Conformance Testing - Part 3: Packet Layer Conformance Test Suite Third Edition Information Technology - Open Systems Interconnection - Data Link Service Definition Second Edition Chromium Ores and Concentrates - Determination of Aluminium Content - Complexometric Method First Edition Dense Shaped Refractory Products - Determination of Resistance to Sulfuric Acid First Edition Oilseed Residues - Determination of Total Residual Hexane First Edition

ISO ISO ISO ISO ISO ISO

8893 8894-1 8894-2 8895 8896 8897

Forestry Machinery - Portable Brush-Cutters and Grass-Trimmers - Engine Performance and Fuel Consumption Second Edition Refractory Materials - Determination of Thermal Conductivity - Part 1: Hot-Wire Method (Cross-Array) First Edition Refractory Materials - Determination of Thermal Conductivity - Part 2: Hot-Wire Method (Parallel) First Edition Shaped Insulating Refractory Products - Determination of Cold Crushing Strength Second Edition Oil of Caraway (Carum carvi Linnaeus) First Edition Oil of Juniper Berry (Juniperus Communis Linnaeus) First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

8898 8899 8900 8901 8902 8903 8904 8905 8906 8909-1 8909-2 8909-3 8910 8912

ISO ISO ISO ISO ISO ISO ISO

8913 8914 8918 8925 8927 8930 8935

ISO

8936

ISO

8940

ISO ISO ISO ISO ISO ISO ISO

8943 8945 8947 8954-1 8954-2 8954-3 8956

Oil of mandarin petitgrain (Citrus reticulata Blanco) First Edition Oil of lemon petitgrain [Citrus limon (L.) Burm. f.] Second Edition Oil of Bergamot Petitgrain [Citrus bergamia (Risso et Poit.)] Second Edition Oil of Bitter Orange Petitgrain, Cultivated (Citrus Aurantium L.) Second Edition Oil of Lavandin Grosso (Lavandula Angustifolia Miller X Lavandula Latifolia (L.f.) Medikus), French Type Second Edition Broadleaved Sawn Timber - Nominal Sizes First Edition Broadleaved Sawn Timber - Sizes - Methods of Measurement First Edition Sawn Timber - Test Methods - Determination of Ultimate Strength in Shearing Parallel to Grain First Edition Sawn Timber - Test Methods - Determination of Resistance to Local Transverse Compression First Edition Forage Harvesters - Part 1: Vocabulary First Edition Forage Harvesters - Part 2: Specification of Characteristics and Performance First Edition Forage Harvesters - Part 3: Test Methods First Edition Machinery and Equipment for Working the Soil - Mouldboard Plough Working Elements - Vocabulary Second Edition Equipment for Working the Soil - Roller Sections - Coupling and Section Width First Edition Aerospace Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 ░F/3 000 psi (204 ░C/20 684 kPa) and 204 ░C/21 000 kPa (400 ░F/3 046 psi) Procurement specification Third edition Microbiology - General Guidance for the Detection of Vibrio Parahaemolyticus Fluorspar - Technical Grades - Chemical Composition and Physical Characteristics First Edition Earth-Moving Machinery - Diagnostic Ports First Edition; Amendment 1-1997 Earth-Moving Machinery - Machine Availability - Vocabulary First Edition General Principles on Reliability for Structures - List of Equivalent Terms First Edition; (PNS 1094: 1992) Tractors for Agriculture and Forestry - Mountings and Apertures for External Equipment Controls First Edition Awnings for leisure accommodation vehicles ù Requirements and test methods Third edition [Superseded: ISO 8937, ISO 8937] Aerospace - Nuts, Anchor, Self-Locking, Sealing, Floating, Two-Lug, with Counterbore with MJ Threads, Classifications 900 MPa (at Ambient Temperature)/ 120 Degrees Celsius, 900 MPa (at Ambient Temperature)/175 Degrees Celsius and 900 MPa (at Ambient Temperature)/235 Degrees Celsius Dimensions Second Edition Refrigerated light hydrocarbon fluids ù Sampling of liquefied natural gas ù Continuous and intermittent methods Second Edition Equipment for Working the Soil - Rotary Cultivator Blades - Fixing Dimensions First Edition Agricultural Machinery - Equipment for Working the Soil - S-Tines: Test Method First Edition Ferroalloys - Vocabulary - Part 1: Materials First Edition Ferroalloys - Vocabulary - Part 2: Sampling and Sample Preparation First Edition Ferroalloys - Vocabulary - Part 3: Sieve Analysis First Edition Acceptance Conditions for Copying Attachments, Integral or Otherwise, for Lathes - Testing of the Accuracy First Edition

ISO

8957

ISO ISO ISO ISO ISO ISO

8960 8965 8966 8967 8968-1 8968-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

8968-3 8968-4 8968-5 8969 8970 8973 8974 8975 8976 8977 8979

ISO

8980-1 CORR 1

ISO

8980-1

ISO ISO ISO

8980-2 CORR 1 8980-2 8980-3

ISO

8980-4

ISO ISO ISO ISO

8980-5 8981 8984-1 8984-2

Information and Documentation - Hebrew Alphabet Coded Character Sets for Bibliographic Information Interchange First Edition Refrigerators, Frozen- Food Storage Cabinets and Food Freezers for Household and Similar Use - Measurement of Emission of Airborne Acoustical Noise First Edition; (CEN EN 28960: 1993) Logging Industry - Technology - Terms and Definitions First Edition Logging Industry - Products - Terms and Definitions First Edition Dried milk and dried milk products Determination of bulk density Second Edition; IDF 134 Milk - Determination of Nitrogen Content - Part 1: Kjeldahl Method First Edition; IDF 20-1 Milk - Determination of Nitrogen Content - Part 2: Block-Digestion Method (Macro Method) First Edition; IDF 20-2 Milk Determination of nitrogen content Part 3: Block-digestion method (Semi-micro rapid routine method) First Edition; IDF 20-3 Milk - Determination of Nitrogen Content - Part 4: Determination of Non-Protein-Nitrogen Content First Edition; IDF 20-4 Milk - Determination of Nitrogen Content - Part 5: Determination of Protein-Nitrogen Content First Edition; IDF 20-5 Timber Structures - Testing of Unilateral Punched Metal Plate Fasteners and Joints First Edition Timber Structures - Testing of Joints Made with Mechanical Fasteners - Requirements for Wood Density First Edition Liquefied Petroleum Gases - Calculation Method for Density and Vapour Pressure First Edition Plastics - Phenolic Resins - Determination of Residual Phenol Content by Gas Chromatography Third Edition Plastics - Phenolic Resins - Determination of pH First Edition; (CEN EN ISO 8975: 1995) Pliers and nippers Multiple slip joint pliers Dimensions and test values Second Edition Tools for Pressing - Matrixes Second Edition Pliers and nippers for electronics Nomenclature Pinces pour l'Úlectronique Nomenclature Second Edition Ophthalmic optics ù Uncut finished spectacle lenses ù Part 1: Specifications for single-vision and multifocal lenses TECHNICAL CORRIGENDUM 1 Third Edition Ophthalmic optics ù Uncut finished spectacle lenses ù Part 1: Specifications for single-vision and multifocal lenses Third Edition Ophthalmic optics ù Uncut finished spectacle lenses ù Part 2: Specifications for progressive power lenses TECHNICAL CORRIGENDUM 1 Second Edition Ophthalmic optics ù Uncut finished spectacle lenses ù Part 2: Specifications for progressive power lenses Second Edition Ophthalmic optics Uncut finished spectacle lenses Part 3:Transmittance specifications and test methods Second Edition Ophthalmic optics Uncut finished spectacle lenses Part 4: Specifications and test methods for anti-reflective coatings Second Edition Ophthalmic optics Uncut finished spectacle lenses Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasionresistant First Edition Wheat - Identification of Varieties by Electrophoresis First Edition Diesel Engines - Testing of Fuel Injectors - Part 1: Hand-Lever-Operated Testing and Setting Apparatus Second Edition Diesel Engines - Testing of Fuel Injectors - Part 2: Test Methods Second Edition

ISO

8985

Plastics - Ethylene/Vinyl Acetate Copolymer (EVAC) Thermoplastics - Determination of Vinyl Acetate Content Second Edition

ISO

8986-1

ISO ISO

8986-2 8987

ISO ISO

8988 8989

ISO ISO ISO

8990 8991 8992

Plastics - Polybutene (PB) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications First Edition Plastics - Polybutene (PB) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties First Edition; Amendment: 06/05/2000 Plastics - Phenolic Resins - Determination of Reactivity on a B-Transformation Test Plate Third Edition Plastics - Phenolic Resins - Determination of Plastics Phenolic resins Determination of hexamethylenetetramine content Kjeldahl method, perchloric acid method and hydrochloric acid method Third Edition Plastics - Liquid Phenolic Resins - Determination of Water Miscibility Second Edition Thermal Insulation - Determination of Steady-State Thermal Transmission Properties -Calibrated and Guarded Hot Box First Edition CEN EN ISO 8990: 1996 Designation System for Fasteners First Edition Fasteners General requirements for bolts, screws, studs and nuts Second Edition

ISO

8993

Anodized Aluminium and Aluminium Alloys - Rating System for the Evaluation of Pitting Corrosion - Chart Method First Edition

ISO

8994

Anodized Aluminium and Aluminium Alloys - Rating System for the Evaluation of Pitting Corrosion - Grid Method First Edition

ISO ISO ISO ISO ISO ISO ISO ISO

8995-3 8995 CORR 1 8995 8996 8999 9000 9001 9004

ISO

9005

ISO ISO

9006 9008

ISO ISO ISO

9009 9010 9011

Lighting of work places Part 3: Lighting requirements for safety and security of outdoor work places First Edition; CIE S 016/E Lighting of indoor work places TECHNICAL CORRIGENDUM 1 Second Edition Lighting of indoor work places Second Edition Ergonomics of the thermal environment Determination of metabolic rate Second Edition Reciprocating Internal Combustion Engines - Graphical Symbols Second Edition Quality Management Systems - Fundamentals and Vocabulary Third Edition Quality Management Systems - Requirements Third Edition; Supersedes ISO 9002:1994 and ISO 9003:1994 Quality Management Systems - Guidelines for Performance Improvements Second Edition; Supersedes ISO 9004-1:1994 Nuclear energy ù Uranium dioxide powder and sintered pellets ù Determination of oxygen/uranium atomic ratio by the amperometric method Second Edition Uranium Metal and Uranium Dioxide Powder and Pellets - Determination of Nitrogen Content - Method Using Ammonia- Sensing Electrode First Edition Glass Bottles - Verticality - Test Method First Edition (CEN 29008: 1994) Glass Containers - Height and Non-Parallelism of Finish with Reference to Container Base - Test Methods First Edition (CEN EN 29009: 1994) Synchronous Belt Drives - Automotive Belts Second Edition Synchronous Belt Drives - Automotive Pulleys Second Edition

ISO ISO

9012 9013

Gas Welding Equipment - Air-Aspirated Hand Blowpipes - Specifications and Tests Second Edition Thermal Cutting - Classification of Thermal Cuts - Geometrical Product Specification and Quality Tolerances Second Edition

ISO

9015-1

Destructive Tests on Welds in Metallic Materials - Hardness Testing - Part 1: Hardness Test on Arc Welded Joints First Edition

ISO

9015-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

9016 9017 9018 9019 9021 9022-1 9022-2 9022-3 9022-4 9022-5 9022-6 9022-7

Destructive tests on welds in metallic materials Hardness testing Part 2: Microhardness testing of welded joints First Edition Destructive Tests on Welds in Metallic Materials - Impact Tests - Test Specimen Location, Notch Orientation and Examination First Edition Destructive Tests on Welds in Metallic Materials - Fracture Test First Edition Destructive tests on welds in metallic materials Tensile test on cruciform and lapped joints First Edition Securities - Numbering of Certificates Second Edition Motorcycles - Controls - Types, Positions and Functions First Edition Optics and Optical Instruments - Environmental Test Methods - Part 1: Definitions, Extent of Testing First Edition Optics and Optical Instruments - Environmental Test Methods - Part 2: Cold, Heat, Humidity Second Edition Optics and Optical Instruments - Environmental Test Methods - Part 3: Mechanical Stress Second Edition Optics and Optical Instruments - Environmental Test Methods - Part 4: Salt Mist Second Edition Optics and Optical Instruments - Environmental Test Methods - Part 5: Combined Cold, Low Air Pressure First Edition Optics and Optical Instruments - Environmental Test Methods - Part 6: Dust First Edition Optics and photonics Environmental test methods Part 7: Resistance to drip or rain Second Edition

ISO ISO

9022-8 9022-9

ISO ISO ISO

9022-10 9022-11 9022-12

ISO ISO

9022-13 9022-14

ISO

9022-15

ISO

9022-16

Optics and Optical Instruments - Environmental Test Methods - Part 8: High Pressure, Low Pressure, Immersion First Edition Optics and Optical Instruments - Environmental Test Methods - Part 9: Solar Radiation First Edition Optics and Optical Instruments - Environmental Test Methods - Part 10: Combined Sinusoidal Vibration and Dry Heat or Cold Second Edition Optics and Optical Instruments - Environmental Test Methods - Part 11: Mould Growth First Edition Optics and Optical Instruments - Environmental Test Methods - Part 12: Contamination First Edition Optics and Optical Instruments - Environmental Test Methods - Part 13: Combined Shock, Bump or Free Fall and Dry Heat or Cold Second Edition Optics and Optical Instruments - Environmental Test Methods - Part 14: Dew, Hoarfrost, Ice First Edition Optics and Optical Instruments - Environmental Test Methods - Part 15: Combined Digitally Controlled Broad-Band Random Vibration and Dry Heat or Cold Second Edition Optics and Optical Instruments - Environmental Test Methods - Part 16: Combined Bounce or Steady-State Acceleration and Dry Heat or Cold Second Edition

ISO

9022-17

Optics and Optical Instruments - Environmental Test Methods - Part 17: Combined Contamination, Solar Radiation First Edition

Optics and Optical Instruments - Environmental Test Methods - Part 18: Combined Damp Heat and Low Internal Pressure First Edition Optics and Optical Instruments - Environmental Test Methods - Part 19: Temperature Cycles Combined with Sinusoidal or Random Vibration First Edition Optics and Optical Instruments - Environmental Test Methods - Part 20: Humid Atmosphere Containing Sulfur Dioxide or Hydrogen Sulfide First Edition Optics and Optical Instruments - Environmental Test Methods - Part 21: Combined Low Pressure and Ambient Temperature or Dry Heat First Edition Raw rubber or unvulcanized compounds ù Determination of green strength Second Edition Rubber Dissolution by acid digestion Second Edition Crude Petroleum - Determination of Water - Distillation Method First Edition (CEN EN ISO 9029: 1995) Crude Petroleum - Determination of Water and Sediment - Centrifuge Method First Edition Air Cargo Equipment - Handling Systems for Unit Load Devices (ULDs) - Symbols for Pictorial Representation First Edition Aluminium Ores - Determination of the Moisture Content of Bulk Material First Edition Hot-Rolled Structural Steel Wide Flats - Tolerances on Dimensions and Shape First Edition Iron Ores - Determination of Acid-Soluble Iron(II) Content - Titrimetric Method First Edition Information Processing - Arabic 7-Bit Coded Character Set for Information Interchange First Edition Test for Sustained Combustibility of Liquids First Edition Optics and optical instruments Quality evaluation of optical systems Determination of distortion First Edition; Corrigendum:07/01/2004 Information Technology - Open Systems Interconnection - Virtual Terminal Basic Class Service Second Edition Information Technology - Open Systems Interconnection - Virtual Terminal Basic Class Protocol - Part 1: Specification Second Edition Information Technology - Open Systems Interconnection - Virtual Terminal Basic Class Protocol - Part 2: Protocol Implementation Conformance Statement (PICS) Proforma Second Edition

ISO

9022-18

ISO

9022-19

ISO

9022-20

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

9022-21 9026 9028 9029 9030 9031 9033 9034 9035 9036 9038

ISO ISO

9039 9040

ISO

9041-1

ISO

9041-2

ISO ISO ISO ISO

9042 9043 9044 9045

ISO

9046

ISO

9047

Steels - Manual Point Counting Method for Statistically Estimating the Volume Fraction of a Constituent with a Point Grid First Edition Mopeds - Measurement Method for Moments of Inertia First Edition Industrial Woven Wire Cloth - Technical Requirements and Testing Second Edition Industrial Screens and Screening - Vocabulary First Edition Building Construction - Jointing Products - Determination of Adhesion/Cohesion Properties of Sealants at Constant Temperature Second Edition Building Construction - Jointing Products - Determination of Adhesion/Cohesion Properties of Sealants at Variable Temperatures Second Edition

ISO

9048

Building Construction - Jointing Products - Determination of Extrudability of Sealants Using Standardized Apparatus First Edition

Glass in Building - Determination of Light Transmittance, Solar Direct Transmittance, Total Solar Energy Transmittance, Ultraviolet Transmittance and Related Glazing Factors Second Edition Glass in Building - Fire-Resistant Glazed Assemblies Containing Transparent or Translucent Glass, for Use in Building Second Edition Acoustics - Determination of Dynamic Stiffness - Part 1: Materials Used Under Floating Floors in Dwellings First Edition

ISO

9050

ISO ISO

9051 9052-1

ISO ISO

9053 9054

ISO

9055

ISO ISO ISO

9057 9058 9059

ISO

9060

ISO

9061

Glass Containers - 28 mm Tamper-Evident Finish for Pressurized Liquids - Dimensions First Edition; Corrigendum 1: 4/1/2006 Glass Containers - Tolerances First Edition Solar Energy - Calibration of Field Pyrheliometers by Comparison to a Reference Pyrheliometer First Edition Solar Energy - Specification and Classification of Instruments for Measuring Hemispherical Solar and Direct Solar Radiation First Edition Acid-Grade and Ceramic- Grade Fluorspar - Determination of Iron Content - 1,10- Phenanthroline Spectrometric Method Second Edition

ISO

9062

Acid-Grade and Ceramic- Grade Fluorspar - Determination of Manganese Content - Periodate Spectrometric Method Second Edition

ISO ISO

9066-1 9066-2

ISO ISO

9066-3 9069

ISO

9070

ISO

9072-1

ISO

9072-2

ISO ISO

9072-3 9073-1

Acoustics - Materials for Acoustical Applications - Determination of Airflow Resistance First Edition; (CEN EN 29053 : 1993) Cellular Plastics, Rigid - Test Methods for Self- Skinned, High-Density Materials First Edition Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Sulfur Content by the Bomb Method First Edition

Information Processing Systems - Text Communication - Reliable Transfer - Part 1: Model and Service Definition First Edition Information Processing Systems - Text Communication - Reliable Transfer - Part 2: Protocol Specification First Edition Information Technology - Open Systems Interconnection - Reliable Transfer: Protocol Implementation Conformance Statement (PICS) Proforma First Edition Information Processing - SGML Support Facilities - SGML Document Interchange Format (SDIF) First Edition Information Technology - SGML Support Facilities - Registration Procedures for Public Text Owner Identifiers Second Edition; CEN EN 29070: 1992; AS/NZS 4097: 1993 Information Processing Systems - Text Communication - Remote Operations - Part 1: Model, Notation and Service Definition First Edition; NZS/ISO/IEC 9072.1: 1989 Information Processing Systems - Text Communication - Remote Operations - Part 2: Protocol Specification First Edition; NZS/ISO/IEC 9072.2: 1989 Information Technology - Open Systems Interconnection - Remote Operations: Protocol Implementation Conformance Statement (PICS) Proforma First Edition Textiles - Test Methods for Nonwovens - Part 1: Determination of Mass per Unit Area First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

9073-2 9073-3 9073-4 9073-6 9073-7 9073-8 9073-9 9073-10 9073-11 9073-12 9073-13 9073-14 9073-15

ISO

9073-18

ISO

9075-1 CORR 2

ISO ISO

9075-1 CORR 1 9075-1

ISO

9075-2 CORR 2

ISO ISO

9075-2 CORR 1 9075-2

ISO ISO

9075-3 CORR 1 9075-3

ISO

9075-4 CORR 2

ISO ISO

9075-4 CORR 1 9075-4

Textiles - Test Methods for Nonwovens - Part 2: Determination of Thickness Second Edition; Technical Corrigendum 1: 12-01-1998 Textiles - Test Methods for Nonwovens - Part 3: Determination of Tensile Strength and Elongation First Edition Textiles - Test Methods for Nonwovens - Part 4: Determination of Tear Resistance Second Edition Textiles - Test Methods for Nonwovens - Part 6: Absorption First Edition Textiles - Test Methods for Nonwovens - Part 7: Determination of Bending Length First Edition Textiles - Test Methods for Nonwovens - Part 8: Determination of Liquid Strike-Through Time (Simulated Urine) First Edition Textiles - Test Methods for Nonwovens - Part 9: Determination of Drape Coefficient First Edition Textiles Test methods for nonwovens Part 10: Lint and other particles generation in the dry state First Edition Textiles Test methods for nonwovens Part 11: Run-off First Edition Textiles Test methods for nonwovens Part 12: Demand absorbency First Edition Textiles Test methods for nonwovens Part 13: Repeated liquid strike-through time First Edition Textiles Test methods for nonwovens Part 14: Coverstock wetback First Edition Textiles ù Test methods for nonwovens ù Part 15: Determination of air permeability First Edition Textiles ù Test methods for nonwovens ù Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test First Edition Information technology ù Database languages ù SQL ù Part 1: Framework (SQL/Framework) TECHNICAL CORRIGENDUM 2 Information technology ù Database languages ù SQL ù Part 1: Framework (SQL/Framework) TECHNICAL CORRIGENDUM 1 Second Edition Information technology ù Database languages ù SQL ù Part 1: Framework (SQL/Framework) Second Edition Information technology ù Database languages ù SQL ù Part 2: Foundation (SQL/Foundation) TECHNICAL CORRIGENDUM 2 Information technology ù Database languages ù SQL ù Part 2: Foundation (SQL/Foundation) TECHNICAL CORRIGENDUM 1 Second Edition Information technology ù Database languages ù SQL ù Part 2: Foundation (SQL/Foundation) Second Edition Information technology ù Database languages ù SQL ù Part 3: Call-Level Interface (SQL/CLI) TECHNICAL CORRIGENDUM 1 Third Edition Information technology ù Database languages ù SQL ù Part 3: Call-Level Interface (SQL/CLI) Third Edition Information technology ù Database languages ù SQL ù Part 4: Persistent Stored Modules (SQL/PSM) TECHNICAL CORRIGENDUM 2 Information technology - Database languages - SQL - Part 4: Persistent Stored Modules (SQUPSM) TECHNICAL CORRIGENDUM 1 Third Edition Information technology - Database languages - SQL - Part 4: Persistent Stored Modules (SQUPSM) Third Edition

ISO

9075-5

ISO ISO

9075-9 CORR 1 9075-9

ISO

9075-10 CORR 2

ISO ISO

9075-10 CORR 1 9075-10

ISO

9075-11 CORR 2

ISO

9075-11 CORR 1

ISO

9075-11

ISO

9075-13 CORR 1

ISO

9075-13

ISO ISO

9075-14 CORR 1 9075-14

ISO ISO

9080 9083

ISO ISO

9084 9085

ISO ISO

9086-1 9087

ISO ISO

9088 9089

Information Technology - Database Languages - SQL - Part 5: Host Language Bindings (SQL/Bindings) First Edition; Corrigendum 1 12/15/2000; Amendment 1: 03/15/2001; Corrigendum 1 to Amendment 1: 06/01/2003; Corrigendum 2: 6/01/2003 Information technology ù Database languages ù SQL ù Part 9: Management of External Data (SQL/MED) TECHNICAL CORRIGENDUM 1 Second Edition Information technology ù Database languages ù SQL ù Part 9: Management of External Data (SQL/MED) Second Edition Information technology ù Database languages ù SQL ù Part 10: Object Language Bindings (SQL/OLB) TECHNICAL CORRIGENDUM 2 Second Edition Information technology ù Database languages ù SQL ù Part 10: Object Language Bindings (SQL/OLB) TECHNICAL CORRIGENDUM 1 Second Edition Information technology ù Database languages ù SQL ù Part 10: Object Language Bindings (SQL/OLB) Second Edition Information technology ù Database languages ù SQL ù Part 11: Information and Definition Schemas (SQL/Schemata) TECHNICAL CORRIGENDUM 2 First Edition Information technology ù Database languages ù SQL ù Part 11: Information and Definition Schemas (SQL/Schemata) TECHNICAL CORRIGENDUM 1 First Edition Information technology ù Database languages ù SQL ù Part 11: Information and Definition Schemas (SQL/Schemata) First Edition Information technology ù Database languages ù SQL ù Part 13: SQL Routines and Types Using the JavaTM Programming Language (SQL/JRT) TECHNICAL CORRIGENDUM 1 Second Edition Information technology ù Database languages ù SQL ù Part 13: SQL Routines and Types Using the JavaTM Programming Language (SQL/JRT) Second Edition Information technology ù Database languages ù SQL ù Part 14: XML-Related Specifications (SQL/XML) TECHNICAL CORRIGENDUM 1 Second Edition Information technology Database languages SQL Part 14: XML-Related Specifications (SQL/XML) Second Edition Plastics Piping and Ducting Systems - Determination of the Long-Term Hydrostatic Strength of Thermoplastics Materials in Pipe Form by Extrapolation First Edition; Replaces ISO TR 9080 Calculation of Load Capacity of Spur and Helical Gears - Application to Marine Gears First Edition Calculation of Load Capacity of Spur and Helical Gears - Application to High Speed Gears and Gears of Similar Requirements First Edition Calculation of Load Capacity of Spur and Helical Gears - Application for Industrial Gears First Edition Wood - Methods of Physical and Mechanical Testing - Vocabulary - Part 1: General Concepts and Macrostructure First Edition Wood - Determination of Nail and Screw Holding Power Under Axial Load Application First Edition Carbonaceous Materials Used for the Production of Aluminium - Cathode Blocks and Prebacked Anodes - Determination of the Density in Xylene by a Pyknometric Method First Edition Marine Structures - Mobile Offshore Units - Anchor Winches First Edition

ISO

9090

Gas Tightness of Equipment for Gas Welding and Allied Processes First Edition

ISO

9091-1

Refrigerated Light- Hydrocarbon Fluids - Calibration of Spherical Tanks in Ships - Part 1: Stereo-Photogrammetry First Edition

ISO ISO ISO ISO ISO ISO ISO

9091-2 9092 9093-1 9093-2 9094-1 9094-2 9095

ISO ISO ISO ISO ISO

9096 CORR 1 9096 9097 9098-1 9098-2

Refrigerated Light Hydrocarbon Fluids - Calibration of Spherical Tanks in Ships - Part 2: Triangulation Measurement First Edition Textiles - Nonwovens - Definition First Edition Small Craft - Seacocks and Through-Hull Fittings - Part 1: Metallic First Edition Small Craft - Seacocks and Through-Hull-Fittings - Part 2: Non-Metallic First Edition Small Craft - Fire Protection - Part 1: Craft with a Hull Length of up to and Including 15 m First Edition Small craft Fire protection Part 2: Craft with a hull length of over 15 m First Edition Steel Tubes - Continuous Character Marking and Colour Coding for Material Identification First Edition Stationary source emissions ù Manual determination of mass concentration of particulate matter TECHNICAL CORRIGENDUM 1 Second Edition Stationary Source Emissions - Manual Determination of Mass Concentration of Particulate Matter Second Edition Small Craft - Electric Fans First Edition; (EN ISO 9097:1994) Bunk Beds for Domestic Use - Safety Requirements and Tests - Part 1: Safety Requirements First Edition Bunk Beds for Domestic Use - Safety Requirements and Tests - Part 2: Test Methods First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

9099 9100-1 9100-2 9100-3 9100-4 9100-5 9100-6 9100-7 9100-8 9100-9 9100-10 9100-11 9100-12 9100-13 9100-14 9101 9102 9103

Air-Conditioning and Ventilation of Dry Provision Rooms on Board Ships - Design Conditions and Basis of Calculations First Edition Glass containers Vacuum lug finishes Part 1: General First Edition; Replaces ISO 9100: 1992 Glass Containers - Vacuum Lug Finishes - Part 2: 33 medium First Edition Glass Containers - Vacuum Lug Finishes - Part 3: 38 regular First Edition Glass Containers - Vacuum Lug Finishes - Part 4: 38 medium First Edition Glass containers Vacuum lug finishes Part 5: 43 and 48 regular First Edition; Replaces ISO 9100: 1992 Glass containers Vacuum lug finishes Part 6: 53 and 58 regular First Edition; Replaces ISO 9100: 1992 Glass containers Vacuum lug finishes Part 7: 58 deep First Edition; Replaces ISO 9100: 1992 Glass containers Vacuum lug finishes Part 8: 63, 66 and 70 regular First Edition; Replaces ISO 9100; 1992 Glass containers Vacuum lug finishes Part 9: 63, 66 and 70 deep First Edition; Replaces ISO 9100; 1992 Glass containers Vacuum lug finishes Part 10: 77 regular First Edition; Replaces ISO 9100: 1992 Glass containers Vacuum lug finishes Part 11: 82 regular First Edition; Replaces ISO 9100: 1992 Glass containers Vacuum lug finishes Part 12: 89 regular First Edition; Replaces ISO 9100: 1992 Glass containers Vacuum lug finishes Part 13: 100 regular First Edition; Replaces ISO 9100: 1992 Glass containers Vacuum lug finishes Part 14: 110 regular First Edition; Replaces ISO 9100; 1992 Surface Active Agents - Determination of Interfacial Tension - Drop Volume Method First Edition Diesel Engines - Screw-in Injection Nozzle Holders, Types 24, 25, 26 and 26.1 Second Edition Road Vehicles - Compression-Ignition Engines - Screw-in Injection Nozzle Holder, Type 23 First Edition

Measurement of Fluid Flow in Closed Conduits - Methods of Evaluating the Performance of Electromagnetic Flow- Meters for Liquids First Edition (CEN EN 29104: 1993) Hydraulic Fluid Power - Measurement Techniques - Part 1: General Measurement Principles First Edition Hydraulic Fluid Power - Measurement Techniques - Part 2: Measurement of Average Steady-State Pressure in a Closed Conduit First Edition Truck and Bus Tyres - Method of Measuring Tyre Rolling Circumference - Loaded New Tyres First Edition Plastics - Polypropylene (PP) and Propylene-Copolymer Thermoplastics - Determination of Isotactic Index First Edition Crude Petroleum - Determination of Water Content by Hydride Reaction - Field Method First Edition Green Coffee - Guidelines on Methods of Specification Second Edition Paints and Varnishes - Determination of Through-Dry State and Through-Dry Time - Method of Test First Edition; (CEN EN 29117:1992) Cross-Country Skis - Binding Mounting Area - Requirements and Test Methods First Edition; Petroleum and Related Products - Determination of Air-Release Properties of Steam Turbine and Other Oils - Impinger Method First Edition; Corrected and Reprinted 05/15/1998 Measurement of Liquid Flow in Open Channels - Stage-Fall-Discharge Relationships First Edition Fibre-cement slates and fittings First Edition; Corrigendum 1: 1993; Amendment 1: 8/15/2004; Corrigendum 2: 05/2005 Software Engineering - Product Quality - Part 1: Quality Model First Edition; Cancels and Replaces ISO/IEC 9126:1991

ISO ISO

9104 9110-1

ISO ISO ISO ISO ISO

9110-2 9112 9113 9114 9116

ISO ISO

9117 9119

ISO ISO ISO ISO

9120 9123 9125 9126-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

9127 9128 9129 9130 9131 9132 9136-1 9136-2 9137 9138 9139 9140 9141

ISO

9141-2

Information Processing Systems - User Documentation and Cover Information for Consumer Software Packages First Edition Road Vehicles - Graphical Symbols to Designate Brake Fluid Types Second Edition Motorcycles - Measurement Methods for Moments of Inertia First Edition Motorcycles Measurement method for location of centre of gravity Second Edition Three Wheeled Mopeds and Motorcycles - Dimensions - Vocabulary First Edition Three-Wheeled Mopeds and Motorcycles - Masses - Vocabulary First Edition Abrasive grains Determination of bulk density Part 1: Macrogrits First Edition; Replaces ISO 9136:1989 Abrasive Grains - Determination of Bulk Density - Part 2: Microgrits First Edition Abrasive Grains - Determination of Capillarity First Edition Abrasive Grains - Sampling and Splitting First Edition Aerospace - Nuts, Plain or Slotted (Castellated) - Procurement Specification First Edition Aerospace - Nuts, Plain or Slotted (Castellated) - Test Methods First Edition Road Vehicles - Diagnostic Systems - Requirements for Interchange of Digital Information First Edition Road Vehicles - Diagnostic Systems - Part 2: CARB Requirements for Interchange of Digital Information First Edition 1994; Amendment 1: 12-01-1996

ISO ISO

9141-3 9142

Road Vehicles - Diagnostic Systems - Part 3: Verification of the Communication Between Vehicle and OBD II Scan Tool First Edition Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints Second Edition

ISO ISO ISO ISO ISO ISO

9144 9147 9148 9149 9150 9151

Securities - Optical Character Recognition Line - Position and Structure First Edition Pig-Irons - Definition and Classification First Edition Composition Cork in Rolls for Decoration - Test Methods First Edition Composition Cork in Rolls for Decoration - Specifications First Edition Protective Clothing - Determination of Behaviour of Materials on Impact of Small Splashes of Molten Metal First Edition Protective Clothing Against Heat and Flame - Determination of Heat Transmission on Exposure to Flame First Edition

ISO

9152

ISO

9154

ISO

9156

ISO ISO ISO ISO ISO ISO

9157 9158 9159 9160 9161 9162

ISO

9163

ISO ISO

9167-1 9167-2

ISO

9168

ISO

9169

ISO

9170-1

ISO

9170-2

Aerospace - Bolts, with MJ Threads, in Titanium Alloys, Strength Class 1 100 MPa - Procurement Specification First Edition Aerospace - Bolts, with MJ Threads, Made of Heat-Resistant Nickel-Based Alloy, Strength Class 1 550 MPa - Procurement Specification First Edition Aerospace - Nuts, Anchor, Self-Locking, Fixed, 90 Degree Corner, Reduced Series, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition Aerospace - Nuts, Spline-Drive, Self-Locking, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/425 Degrees C, 1 100 MPa (at Ambient Temperature)/650 Degrees C, 1 210 MPa (at Ambient Temperature)/425 Degrees C, 1 210 MPa (at Ambient Temperature)/730 Degrees C, 1 550 MPa (at Ambient Temperature)/235 Degrees C, 1 550 MPa (at Ambient Temperature)/425 Degrees Second Edition Road Vehicles - Nozzle Spouts for Unleaded Gasoline First Edition Road Vehicles - Nozzle Spouts for Leaded Gasoline and Diesel Fuel First Edition Information Processing - Data Encipherment - Physical Layer Interoperability Requirements First Edition Uranium dioxide powder Determination of apparent density and tap density First Edition Petroleum Products - Fuels (Class F) - Liquefied Petroleum Gases - Specifications First Edition Textile Glass - Rovings - Manufacture of Test Specimens and Determination of Tensile Strength of Impregnated Rovings Second edition Rapeseed - Determination of Glucosinolates Content - Part 1: Method Using High-Performance Liquid Chromatography First Edition (CEN EN ISO 9167-1: 1995) Rapeseed - Determination of Glucosinolates Content - Part 2: Method Using X-ray Fluorescence Spectrometry First Edition Dental Handpieces - Hose Connectors Second Edition; (Incorporating Draft Addendum 1-1989); (CEN EN 29168: 1994) (CAN/CSAZ349.58-94) Air quality Definition and determination of performance characteristics of an automatic measuring system Second Edition;:1995 [Superseded: ISO 6879] Terminal Units for Medical Gas Pipeline Systems - Part 1: Terminal Units for Use with Compressed Medical Gases and Vacuum First Edition Terminal Units for Use in Medical Gas Pipeline Systems - Part 2: Terminal Units for Anaesthetic Gas Scavenging Systems First Edition

ISO

9171-1

ISO ISO ISO

9171-2 9173-1 9174

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

9175-1 9177-1 9177-2 9177-3 9180 9181 9182-1 9182-2 9182-3 9182-4 9182-5 9183-1 9183-2 9184-1 9184-2 9184-3 9184-4 9184-5 9184-6 9184-7 9185

ISO ISO ISO

9186-1 9187-1 9187-2

ISO

9188

ISO

9189

Information Technology - 130 mm Optical Disk Cartridge, Write Once, for Information Interchange - Part 1: Unrecorded Optical Disk Cartridge First Edition; CEN EN 29171-1: 1993 Information Technology - 130 mm Optical Disk Cartridge, Write Once, for Information Interchange - Part 2: Recording Format First Edition; CEN EN 29171-2: 1993 Dentistry Extraction forceps Part 1: General requirements and test methods Second Edition Water Quality - Determination of Total Chromium - Atomic Absorption Spectrometric Methods Second Edition Tubular Tips for Hand- Held Technical Pens Using India Ink on Tracing Paper - Part 1: Definitions, Dimensions, Designation and Marking First Edition Mechanical Pencils - Part 1: Classification, Dimensions, Performance Requirements and Testing First Edition Mechanical Pencils - Part 2: Black Leads - Classification and Dimensions First Edition Mechanical Pencils - Part 3: Black Leads - Bending Strengths of HB Leads First Edition Black Leads for Wood-Cased Pencils - Classification and Diameters First Edition Tools for Pressing - Round Punches with 60 Degree Conical Head and Reduced Shank Second Edition Tools for Pressing - Guide Pillars - Part 1: Types First Edition Tools for Pressing - Guide Pillars - Part 2: Type A, Straight Pillars First Edition Tools for Pressing - Guide Pillars - Part 3: Type B, End-Locking Pillars First Edition Tools for Pressing - Guide Pillars - Part 4: Type C, Pillars with Taper Lead and Bush First Edition Tools for Pressing - Guide Pillars - Part 5: Type D, End-Locking Pillars with Flange First Edition Tools for Pressing - Wear Plates for Press Dies - Part 1: Type A First Edition Tools for Pressing - Wear Plates for Press Dies - Part 2: Type B First Edition Paper, Board and Pulps - Fibre Furnish Analysis - Part 1: General Method First Edition Paper, Board and Pulps - Fibre Furnish Analysis - Part 2: Staining Guide First Edition Paper, Board and Pulps - Fibre Furnish Analysis - Part 3: Herzberg Staining Test First Edition Paper, Board and Pulps - Fibre Furnish Analysis - Part 4: GraffC" Staining Test First Edition" Paper, Board and Pulps - Fibre Furnish Analysis - Part 5: Lofton-Merritt Staining Test (Modification of Wisbar) First Edition Paper, Board and Pulps - Fibre Furnish Analysis - Part 6: Determination of Fibre Coarseness First Edition Paper, Board and Pulp - Fibre Furnish Analysis - Part 7: Determination of Weight Factor First Edition Protective clothing ù Assessment of resistance of materials to molten metal splash Second Edition Graphical symbols ù Test methods ù Part 1: Methods for testing comprehensibility First Edition [Superseded: ISO 9186, ISO 9186] Injection equipment for medical use Part 1: Ampoules for injectables Third Edition Injection Equipment for Medical Use - Part 2: One-Point-Cut (OPC) Ampoules First Edition Machine Tools - Straight-Sided Single-Action Mechanical Power Presses from 400 kN up to and Including 4 000 kN Nominal Force Characteristics and Dimensions First Edition Machine Tools - Straight-Sided High-Speed Mechanical Power Presses from 250 kN up to and Including 4 000 kN Nominal Force Characteristics and Dimensions First Edition

ISO ISO ISO ISO

9190 9191 9192 9193

ISO ISO ISO ISO ISO

9194 9195 9196 9197 9198

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

9199 9200 9202 9203-1 9203-2 9203-3 9205 9206 9208 9211-1 9211-2 9211-3 9211-4 9213

ISO

9216

ISO

9217

ISO

9218

Lawn and Garden Ride-on (Riding) Tractors - Drawbar First Edition [Replaced: ASABE S298.1] Lawn and Garden Ride-on (Riding) Tractors - Three-Point Hitch First Edition Lawn and Garden Ride-on (Riding) Tractors - One- Point Tubular Sleeve Hitch First Edition Lawn and Garden Ride-on (Riding) Tractors - Power Take-off First Edition Bases for Design of Structures - Actions Due to the Self-Weight of Structures, Non- Structural Elements and Stored Materials Density First Edition (PNS 1095:1992) Liquid Flow Measurement in Open Channels - Sampling and Analysis of Gravel-Bed Material First Edition Liquid Flow Measurement in Open Channels - Flow Measurements Under Ice Conditions First Edition Paper, board and pulps Determination of water-soluble chlorides Second Edition Paper, Board and Pulp - Determination of Water-Soluble Sulfates Second Edition Aerospace - Nuts, Bihexagonal, Self-Locking, MJ Threads, Classifications 1 100 MPa (at Ambient Temp.)/425 Degrees C, 1 100 MPa (at Ambient Temp.)/650 Degrees C, 1 210 MPa (at Ambient Temp.)/425 Degrees C, 1 210 MPa (at Ambient Temp.)/730 Degrees C, 1 550 Mpa (at Ambient Temp.)/235 Degrees C, 1 550 MPa (at Ambient Temp.)/425 Degrees C and 1 550 MPa (at Ambient Temp.)/600 Degrees C, - Dimensions Second Edition Crude Petroleum and Liquid Petroleum Products - Volumetric Metering of Viscous Hydrocarbons First Edition Jewelry - Fineness of Precious Metal Alloys First Edition; (CEN EN 29202:1992) Shipbuilding - Topology of Ship Hull Structure Elements - Part 1: Location of Elements First Edition Shipbuilding - Topology of Ship Hull Structure Elements - Part 2: Description of Elements First Edition Shipbuilding - Topology of Ship Hull Structure Elements - Part 3: Relations of Elements First Edition Refractory Bricks for Use in Rotary Kilns - Hot-Face Identification Marking First Edition Aerospace - Constant Displacement Hydraulic Motors - General Specifications First Edition Aluminium Ores - Determination of Vanadium Content - BPHA Spectrophotometric Method First Edition Optics and Optical Instruments - Optical Coatings - Part 1: Definitions First Edition Optics and Optical Instruments - Optical Coatings - Part 2: Optical Properties First Edition Optics and Optical Instruments - Optical Coatings - Part 3: Environmental Durability First Edition Optics and optical instruments Optical coatings Part 4: Specific test methods Second Edition Measurement of total discharge in open channels Electromagnetic method using a full-channel-width coil Second Edition Aerospace - Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses First Edition Aerospace - Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses First Edition Aerospace - Washers, flat, for pulleys, in alloy steel cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses First Edition

ISO

9219

Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated - Dimensions and masses First Edition

ISO ISO ISO

9220 9221-1 9221-2

ISO

9222-1

ISO ISO ISO ISO

9222-2 9223 9224 9225

ISO ISO

9226 9227

Metallic Coatings - Measurement of Coating Thickness - Scanning Electron Microscope Method First Edition (CEN EN ISO 9220: 1994) Furniture - Children┤s High Chairs - Part 1: Safety Requirements First Edition (CEN ENV 1178-1:1994) Furniture - Children┤s High Chairs - Part 2: Test Methods First Edition (CEN ENV 1178-2:1994) Technical Drawings - Seals for Dynamic Application - Part 1: General Simplified Representation First Edition; (Corrected and Reprinted -1989) (CEN EN ISO 9222-1:1995) Technical Drawings - Seals for Dynamic Application - Part 2: Detailed Simplified Representation First Edition; (CEN EN ISO 92222:1994) Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Classification First Edition Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Guiding Values for the Corrosivity Categories First Edition Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Measurement of Pollution First Edition Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Determination of Corrosion Rate of Standard Specimens for the Evaluation of Corrosivity First Edition Corrosion Tests in Artificial Atmospheres - Salt Spray Tests Second Edition; Replaces ISO 7253:1996

ISO

9229

Wõrmedõmmung ù Begriffsbestimmungen Thermal insulation ù Vocabulary Isolation thermique ù Vocabulaire Second Edition

ISO

9230

ISO

9232

ISO ISO

9233 9235

ISO

9236-1

ISO ISO

9236-3 9237

Information and documentation ù Determination of price indexes for print and electronic media purchased by libraries Second edition Yogurt - Identification of Characteristic Microorganisms (Lactobacillus Delbrueckii Subsp. Bulgaricus and Streptococcus Thermophilus) First Edition Cheese and Cheese Rind - Determination of Natamycin Content - Method by Molecular Absorption Spectrometry and by HighPerformance Liquid Chromatography First Edition Aromatic Natural Raw Materials - Vocabulary First Edition Photography Sensitometry of screen/film systems for medical radiography Part 1: Determination of sensitometric curve shape, speed and average gradient Second Edition Photography - Sensitometry of Screen/Film Systems for Medical Radiography - Part 3: Determination of Sensitometric Curve Shape, Speed and Average Gradient for Mammography First Edition Textiles - Determination of the Permeability of Fabrics to Air First Edition (CEN EN ISO 9237: 1995)

ISO ISO

9239-1 9239-2

ISO

9241-1

ISO

9241-2

Reaction to Fire Tests for Floorings - Part 1: Determination of the Burning Behaviour Using a Radiant Heat Source Second Edition Reaction to fire tests for floorings - Part 2: Determination of flame spread at a heat flux level of 25 kW/m2 First Edition Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 1: General Introduction Second Edition; Amendment 1-03/01/2001 Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 2: Guidance on Task Requirements First Edition

ISO

9241-3

ISO

9241-4

ISO

9241-5

ISO

9241-6

ISO

9241-7

ISO

9241-8

ISO

9241-9

Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 3: Visual Display Requirements First Edition; Amendment 1:12/15/2000 Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 4: Keyboard Requirements First Edition; Technical Corrigendum 1, 11/01/2000 [: ISO 9241-400] Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 5: Workstation Layout and Postural Requirements First Edition Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 6: Guidance on the Work Enviroment First Edition Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 7: Requirements for Display with Reflections First Edition Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 8 Requirements for Displayed Colours First Edition Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 9: Requirements for Non-Keyboard Input Device First Edition [: ISO 9241-400]

ISO

9241-11

Ergonomic Requirements For Office Work with Visual Display Terminals (VDTs) - Part 11: Guidance on Usability First Edition

ISO ISO ISO ISO

9241-12 9241-13 9241-14 9241-15

Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 12: Presentation of Information First Edition Ergonomic Requirements For Office Work with Visual Display Terminals (VDTs) - Part 13: User Guidance First Edition Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 14: Menu Dialogues First Edition Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 15: Command Dialogues First Edition

ISO

9241-16

Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 16: Direct Manipulation Dialogues First Edition

ISO ISO

9241-17 9241-110

ISO ISO ISO ISO ISO ISO

9241-400 9242 9243 9244 9245 9246

ISO

9247

Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 17: Form Filling Dialogues First Edition Ergonomics of human-system interaction Part 110: Dialogue principles First Edition;:1996 [Replaced: ISO 9241-10] Ergonomics of human-system interaction ù Part 400: Principles and requirements for physical input devices First Edition [: ISO 92414, ISO 9241-9] Pliers and Nippers - Construction Worker┤s Pincers - Dimensions and Test Values First Edition (AS/NZS 4056.10: 1992) Pliers and Nippers - Carpenter┤s Pincers - Dimensions and Test Values First Edition Earth-Moving Machinery - Safety Signs and Hazard Pictorials - General Principles First Edition Earth-Moving Machinery - Machine Productivity - Vocabulary, Symbols and Units First Edition Earth-Moving Machinery - Crawler and Wheel Tractor Dozer Blades - Volumetric Ratings First Edition Earth-Moving Machinery - Electrical Wires and Cables - Principles of Identification and Marking First Edition; Amendment 1: 12/15/1998

ISO ISO

9248 9249

Earth-Moving Machinery - Units for Dimensions, Performance and Capacities, and Their Measurement Accuracies First Edition Earth-Moving Machinery - Engine Test Code - Net Power Second Editon; Technical Corrigendum 1: 03-01-1999

ISO ISO

9251 9252

ISO

9254

ISO

9255

ISO ISO ISO ISO ISO ISO ISO ISO ISO

9256 9258 9259 9261 9264 9265 9266 9267 9268

Thermal Insulation - Heat Transfer Conditions and Properties of Materials - Vocabulary First Edition (CEN EN ISO 9251: 1995) Synthetic Rubber Latex - Microbiological Examination First Edition Aerospace - Bolts, Normal Spine Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition Aerospace - Bolts, Normal Spline Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition Aerospace - Bolts, Large Hexagonal Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition Passenger Cars - Wiper Systems - Wiper Blade Length First Edition Passenger Cars - Windscreen Wiper Systems - Wiper Arm-to-Blade Connections First Edition; Amendment 1 - 07-15-2001 Agricultural irrigation equipment Emitters and emitting pipe Specification and test methods Second Edition Woodworking Machines - Narrow Belt Sanding Machines with Sliding Table or Frame - Nomenclature First Edition Woodworking Machines - Multi-Spindle Boring Machines - Nomenclature First Edition Woodworking Machines - Universal Tool and Cutter Sharpeners - Nomenclature First Edition Woodworking Machines - Bandsaw Blade Sharpening Machines - Nomenclature First Edition Implants for Surgery - Metal Bone Screws with Conical Under-Surface of Head - Dimensions First Edition;

ISO ISO ISO

9269 9270 9271

Implants for Surgery - Metal Bone Plates - Holes and Slots Corresponding to Screws with Conical Under-Surface First Edition; 7/24 Tapers for Tool Shanks for Automatic Changing - Tapers for Spindle Noses First Edition Decontamination of Radioactively Contaminated Surfaces - Testing of Decontamination Agents for Textiles First Edition

ISO

9276-1

ISO ISO

9276-2 9276-4

ISO ISO

9276-5 9277

ISO ISO ISO

9278 9279 9281-1

Representation of Results of Particle Size Analysis - Part 1: Graphical Representation Second Edition; Corrigendum 1: 2-1-2004 Representation of Results of Particle Size Analysis - Part 2: Calculation of Avarage Particle Sizes/Diameters and Moments from Particle Size Distributions First Edition Representation of Results of Particle Size Analysis - Part 4: Characterization of a Classification Process First Edition Representation of results of particle size analysis - Part 5: Methods of calculation relating to particle size analyses using logarithmic normal probability distribution First Edition Determination of the Specific Surface Area of Solids by Gas Adsorption Using the BET Method First Edition Uranium Dioxide Pellets - Determination of Density and Amount of Open and Closed Porosity - Boiling Water Method and Penetration Immersion Method First Edition Uranium Dioxide Pellets - Determination of Density and Total Porosity - Mercury Displacement Method First Edition Information Technology - Picture Coding Methods - Part 1: Identification First Edition; NZS/ISO/IEC 9281.1: 1990

ISO

9281-2

ISO ISO ISO ISO ISO ISO ISO

9282-1 9283 9284 9285 9286 9288 9289

ISO ISO

9292 9293

ISO ISO ISO ISO ISO ISO

9295 9296 9297 9298 9300 9301

ISO

9302

ISO

9303

ISO

9304

ISO

9305

ISO

9308-1 CORR 1

ISO

9308-1

ISO

9308-2

ISO ISO

9308-3 9309

Information Technology - Picture Coding Methods - Part 2: Procedure for Registration First Edition Information Processing - Coded Representation of Pictures - Part 1: Encoding Principles for Picture Representation in a 7-Bit or 8-Bit Environment First Edition Manipulating Industrial Robots - Performance Criteria and Related Test Methods Second Edition Abrasive Grains - Test- Sieving Machines First Edition Abrasive Grains and Crude - Chemical Analysis of Fused Aluminium Oxide First Edition Abrasive Grains and Crude - Chemical Analysis of Silicon Carbide First Edition Thermal Insulation - Heat Transfer by Radiation - Physical Quantities and Definitions First Edition (CEN EN ISO 9288: 1996) Oilseed Residues - Determination of Free Residual Hexane First Edition (CEN EN ISO 9289: 1995) Manganese Ores and Concentrates - Determination of Total Iron Content - 1,10- Phenanthroline Spectrometric Method First Edition Information Technology - Volume and File Structure of Disk Cartridges for Information Interchange Second Edition Acoustics - Measurement of High-Frequency Noise Emitted by Computer and Business Equipment First Edition; Corrected and Reprinted- 1989 Acoustics - Declared Noise Emission Values of Computer and Business Equipment First Edition Water Quality - Determination of Chloride - Silver Nitrate Titration with Chromate Indicator (Mohr┤s Method) First Edition Rubber Compounding Ingredients - Zinc Oxide - Test Methods First Edition Measurement of gas flow by means of critical flow Venturi nozzles Second Edition Oil of cumin seed (Cuminum cyminum L.) First Edition Seamless and Welded (Except Submerged Arc- Welded) Steel Tubes for Pressure Purposes - Electromagnetic Testing for Verification of Hydraulic Leak-Tightness Second Edition Seamless and Welded (Except Submerged Arc- Welded) Steel Tubes for Pressure Purposes - Full Peripheral Ultrasonic Testing for the Detection of Longitudinal Imperfections First Edition Seamless and Welded (Except Submerged Arc- Welded) Steel Tubes for Pressure Purposes - Eddy Current Testing for the Detection of Imperfections First Edition Seamless Steel Tubes for Pressure Purposes - Full Peripheral Ultrasonic Testing for the Detection of Transverse Imperfections First Edition Water quality ù Detection and enumeration of Escherichia coli and coliform bacteria ù Part 1: Membrane filtration method TECHNICAL CORRIGENDUM 1 Second Edition Water Quality - Detection and Enumeration of Escherichia Coli and Coliform Bacteria - Part 1: Membrane Filtration Method Second Edition Water Quality - Detection and Enumeration of Coliform Organisms, Thermotolerant Coliform Organisms and Presumptive Escherichia Coli - Part 2: Multiple Tube (Most Probable Number) Method First Edition Water Quality - Detection and Enumeration of Escherichia Coli and Coliform Bacteria in Surface and Waste Water - Part 3: Miniaturized Method (Most Probable Number) by Inoculation in a Liquid Medium First Edition; Corrigendum 1: 2000 Refrigerant Compressors - Presentation of Performance Data First Edition (NZS/ISO 9309: 1989)

ISO ISO

9311-1 9311-2

Adhesives for thermoplastic piping systems Part 1: Determination of film properties First Edition Adhesives for Thermoplastic Piping Systems - Part 2: Determination of Shear Strength First Edition

ISO ISO ISO

9311-3 9312 9313

ISO

9314-1

ISO

9314-2

ISO

9314-3

ISO ISO ISO ISO ISO

9314-4 9314-5 9314-6 9314-7 9314-8

ISO

9314-9

ISO

9314-13

ISO

9314-20

ISO

9314-21

ISO

9314-25

ISO ISO ISO

9314-26 9315 9316

ISO

9316-2

Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure First Edition Resistance Welding Equipment - Insulated Pins for Use in Electrode Back-ups First Edition; (EN ISO 9312 : 1994) Resistance Spot Welding Equipment - Cooling Tubes First Edition Information Processing Systems - Fibre Distributed Data Interface (FDDI) - Part 1: Token Ring Physical Layer Protocol (PHY) First Edition Information Processing Systems - Fibre Distributed Data Interface (FDDI) - Part 2: Token Ring Media Access Control (MAC) First Edition Information Processing Systems - Fibre Distributed Data Interface (FDDI) - Part 3: Physical Layer Medium Dependent (PMD) First Edition; NZS/ISO/IEC 9314.3: 1990; CEN EN ISO/IEC 9314-3: 1995 Information Technology - Fibre Distributed Data Interface (FDDI) - Part 4: Single-Mode Fiber Physical Layer Medium Dependent (SMF-PMD) First Edition Information Technology - Fibre Distributed Data Interface (FDDI) - Part 5: Hybrid Ring Control (HRC) First Edition Information Technology - Fibre Distributed Data Interface (FDDI) - Part 6: Station Management (SMT) First Edition Information Technology - Fibre Distributed Data Interface (FDDI) - Part 7: Physical Layer Protocol (PHY-2) First Edition Information Technology - Fibre Distributed Data Interface (FDDI)- Part 8: Media Access Control-2 (MAC-2) First Edition Information Technology - Fibre Distributed Data Interface (FDDI) - Part 9: Low-Cost Fibre Physical Layer Medium Dependent (LCFPMD) First Edition Information Technology - Fibre Distributed Data Interface (FDDI) - Part 13: Conformance Test Protocol Implementation Conformance Statement Proforma (CT-PICS) Proforma First Edition Information Technology - Fibre Distributed Data Interface (FDDI) - Part 20: Abstract Test Suite for FDDI Physical Medium Dependent Conformance Testing (PMD ATS) First Edition Information Technology - Fibre Distributed Data Interface (FDDI) - Part 21: Abstract Test Suite for FDDI Physical Layer Protocol Conformance Testing (PHY ATS) First Edition Information Technology - Fibre Distributed Data Interface (FDDI) - Part 25: Abstract Test Suite for FDDI - Station Management Conformance Testing (SMT-ATS) First Edition Information Technology - Fibre Distributed Data Interface (FDDI) - Part 26: Media Access Control Conformance Testing (MAC-ATS) First Edition Information Processing Systems - Interface Between Flexible Disk Cartridge Drives and Their Host Controllers First Edition Information Technology - Small Computer System Interface-2 Second Edition Information Technology - Small Computer System Interface-2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI Interface Module First Edition

ISO

9318-2

Information Technology - Intelligent Peripheral Interface Part 2: Device Specific Command Set for Magnetic Disk Drives First Edition

ISO

9318-3

ISO

9318-4

ISO

9327-1

ISO

9327-2

ISO

9327-3

ISO

9327-4

ISO ISO

9327-5 9328-1

ISO

9328-2

ISO

9328-3

ISO

9328-4

ISO

9328-5

ISO ISO

9328-6 9328-7

ISO

9329-1

ISO

9329-3

ISO

9329-4

ISO

9330-1

ISO

9330-2

Information Technology - Intelligent Peripheral Interface Part 3: Device Generic Command Set for Magnetic and Optical Disk Drives First Edition Information Technology - Intelligent Peripheral Interface Part 4: Device Generic Command Set for Magnetic Tape Drives (IPI-3 Tape) Second Edition Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 1: General Requirements First Edition; Replaces ISO 2604-1: 1975 Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 2: Non-Alloy and Alloy (Mo, Cr and CrMo) Steels with Specified Elevated Temperature Properties First Edition Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 3: Nickel Steels with Specified Low Temperature Properties First Edition Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 4: Weldable Fine Grain Steels with High Proof Strength First Edition Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 5: Stainless Steels First Edition Steel Flat Products for Pressure Purposes - Technical Delivery Conditions - Part 1: General Requirements Second Edition Steel flat products for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steels with specified elevated temperature properties Second Edition Steel flat products for pressure purposes Technical delivery conditions Part 3: Weldable fine grain steels, normalized Second Edition; Together with ISO 9328-6, cancels and replaces ISO 9328-4:1991 Steel flat products for pressure purposes Technical delivery conditions Part 4: Nickel-alloy steels with specified low temperature properties Second Edition Steel flat products for pressure purposes Technical delivery conditions Part 5: Weldable fine grain steels, thermomechanically rolled Second Edition Steel flat products for pressure purposes Technical delivery conditions Part 6: Weldable fine grain steels, quenched and tempered First Edition Steel flat products for pressure purposes Technical delivery conditions Part 7: Stainless steels First Edition Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 1: Unalloyed Steels with Specified Room Temperature Properties First Edition; Supersedes 2604-2 Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 3: Unalloyed and Alloyed Steels with Specified Low Temperature Properties First Edition; Replaces 2604-2 Along with 9329-2,1 and 4 Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 4: Austenitic Stainless Steels First Edition; Replaces 2604-2 Along with 9329-2,3 and 1 Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 1: Unalloyed Steel Tubes with Specified Room Temperature Properties First Edition; (Corrected and Reprinted -1990) Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 2: Electric Resistance and Induction Welded Unalloyed and Alloyed Steel Tubes with Specified Elevated Temperature Properties First Edition

ISO

9330-3

ISO

9330-4

ISO

9330-5

ISO ISO

9330-6 9333

ISO

9334

ISO

9335

ISO ISO ISO

9336-1 9336-2 9336-3

ISO

9342-1

ISO ISO ISO

9342-2 9343 9344

ISO

9345-1

ISO

9345-2

ISO ISO ISO ISO

9346 9349 9352 9354

ISO ISO

9355-1 9355-2

Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 3: Electric Resistance and Induction Welded Unalloyed and Alloyed Steel Tubes with Specified Low Temperature Properties First Edition Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 4: Submerged Arc-Welded Unalloyed and Alloyed Steel Tubes with Specified Elevated Temperature Properties First Edition Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 5: Submerged Arc-Welded Unalloyed and Alloyed Steel Tubes with Specified Low Temperature Properties First Edition Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 6: Longitudinally Welded Austenitic Stainless Steel Tubes First Edition Dentistry Brazing materials Second Edition Optics and photonics ù Optical transfer function ù Definitions and mathematical relationships Optique et photonique ù Fonction de transfert optique ù DÚfinitions et relations mathÚmatiques Second Edition; Trilingual Optics and optical instruments - Optical transfer function - Principles and procedures of measurement First Edition; Corrigendum: 11/15/2005 Optics and Optical Instruments - Optical Transfer Function - Application Part 1: Interchangeable Lenses for 35mm Still Cameras First Edition Optics and Optical Instruments - Optical Transfer Function - Application Part 2: Lenses for Office Copiers First Edition Optics and Optical Instruments - Optical Transfer Function - Application Part 3: Telescopes First Edition Optics and optical instruments Test lenses for calibration of focimeters Part 1: Test lenses for focimeters used for measuring spectacle lenses First Edition; Replaces ISO 9342:1996 Optics and optical instruments Test lenses for calibration of focimeters Part 2: Test lenses for focimeters used for measuring contact lenses First Edition Pliers and nippers Slip joint pliers Dimensions and test values Second Edition Optics and Optical Instruments - Microscopes - Graticules for Eyepieces First Edition Optics and Optical Instruments - Microscopes - Imaging Distances Related to Mechanical Reference Planes - Part 1: Tube Length 160 mm First Edition Optics and Optical Instruments - Microscopes: Imaging Distances Related to Mechanical Reference Planes - Part 2: InfinityCorrected Optical Systems First Edition Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary Performance hygrothermique des bÔtiments et des matÚriaux pour le bÔtiment - Grandeurs physiques pour le transfert de masse - Vocabulaire Second Edition Preinsulated ductile iron pipeline systems Second Edition Plastics - Determination of Resistance to Wear by Abrasive Wheels Second Edition Textiles - Weaves - Coding System and Examples First Edition; Technical Corrigendum 1:10-15-2000 Ergonomic Requirements for the Design of Displays and Control Actuators - Part 1: Human Interactions with Displays and Control Actuators First Edition Ergonomic Requirements for the Design of Displays and Control Actuators - Part 2: Displays First Edition

ISO ISO ISO

9355-3 9356 9357

ISO ISO

9358 9359

ISO

9360-1

ISO

9360-2

ISO

9361-1

ISO ISO ISO

9361-2 9362 9364

ISO

9366

ISO

9367-1

ISO

9367-2

ISO

9368-1

ISO ISO ISO ISO ISO ISO ISO ISO

9370 9373 9374-1 9374-3 9374-4 9374-5 9375 9376

ISO ISO

9377-2 9378

Ergonomic requirements for the design of displays and control actuators Part 3: Control actuators First Edition Polyolefin Pipe Assemblies with or Without Jointed Fittings - Resistance to Internal Pressure - Test Method First Edition Equipment for Crop Protection - Agricultural Sprayers - Tank Nominal Volume and Filling Hole Diameter First Edition Optics and Optical Instruments - Veiling Glare of Image-Forming Systems - Definitions and Methods of Measurement First Edition Air Quality - Stratified Sampling Method for Assessment of Ambient Air Quality First Edition Anaesthetic and Respiratory Equipment - Heat and Moisture Exchangers (HMEs) for Humidifying Respired Gases in Humans - Part 1: HMEs for Use with Minimum Tidal Volumes of 250 ml First Edition Anaesthetic and Respiratory Equipment - Heat and Moisture Exchangers (HMEs) for Humidifying Respired Gases in Humans Part 2: HMEs for Use with Tracheostomized Patients Having Minimum Tidal Volumes of 250 ml First Edition Indexable Inserts for Cutting Tools - Ceramic Inserts with Rounded Corners - Part 1: Dimensions of Inserts Without Fixing Hole First Edition Indexable Inserts for Cutting Tools - Ceramic Inserts with Rounded Corners - Part 2: Dimensions of Inserts with Cylindrical Fixing Hole First Edition Banking - Banking Telecommunication Messages - Bank Identifier Codes Second Edition Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities Third Edition Agglomerated Cork Floor Tiles - Determination of Dimensions and Deviation from Squareness and from Straightness of Edges Second Edition Lashing and Securing Arrangements on Road Vehicles for Sea Transportation on Ro/Ro Ships - General Requirements - Part 1: Commercial Vehicles and Combinations of Vehicles, Semi-Trailers Excluded First Edition (CEN EN 29367-1: 1993) Lashing and Securing Arrangements on Road Vehicles for Sea Transportation on Ro/Ro Ships - General Requirements - Part 2: Semi-Trailers First Edition (CEN EN 29367-2:1994) Measurement of Liquid Flow in Closed Conduits by the Weighing Method - Procedures for Checking Installations - Part 1: Static Weighing Systems First Edition Plastics - Instrumental Determination of Radiant Exposure in Weathering Tests - General Guidance and Basic Test Method First Edition Cranes and Related Equipment - Accuracy Requirements for Measuring Parameters During Testing First Edition Cranes - Information to Be Provided - Part 1: General First Edition Cranes - Information to be Provided for Enquiries, Orders, Offers and Supply Part 3: Tower Cranes First Edition Cranes - Information to Be Provided - Part 4: Jib Cranes First Edition Cranes - Information to Be Provided - Part 5: Overhead Travelling Cranes and Portal Bridge Cranes First Edition Woodworking Machines - Disc Sanding Machines with Spindle in Fixed Position - Nomenclature First Edition Early Potatoes - Guide to Cooling and Refrigerated Transport First Edition Water Quality - Determination of Hydrocarbon Oil Index - Part 2: Method Using Solvent Extraction and Gas Chromatography First Edition Photography - Vesicular Microfilm - Determination of ISO Speed and ISO Range First Edition

ISO ISO ISO ISO

9379 9380 9381 9382

ISO ISO ISO

9383 9384 9385

ISO

9386-1

ISO

9386-2

ISO ISO

9388 9390

ISO ISO ISO

9391 9392 9393-1

ISO

9393-2

ISO

9394

ISO

9396

ISO

9398-1

ISO

9398-2

ISO

9398-3

ISO ISO

9398-4 9400

ISO

9402

Operating forces Test method Doors Second Edition Doorsets - Repeated Torsion Test First Edition Hinged or pivoted doors Determination of the resistance to static torsion Second Edition Shipborne Barges, All Series - Classification and Main Requirements First Edition Products in fibre-reinforced cement Short corrugated or asymmetrical section sheets and fittings for roofing First Edition; Amendment 1: 09/15/2004; Technical Corrigendum 1: 5/15/2005 Fibre-cement siding shingles First Edition; Amendment 1: 9/1/2004; Corrigendum 1: 05/2005 Glass and Glass-Ceramics - Knoop Hardness Test First Edition Power-Operated Lifting Platforms for Persons with Impaired Mobility - Rules for Safety, Dimensions and Functional Operation - Part 1: Vertical Lifting Platforms First Edition Power-Operated Lifting Platforms for Persons with Impaired Mobility - Rules for Safety, Dimensions and Functional Operation - Part 2: Powered Stairlifts for Seated, Standing and Wheelchair Users Moving in an Inclined Plane First Edition Nickel Alloys - Determination of Phosphorus Content - Molybdenum Blue Molecular Absorption Spectrometric Method First Edition Water Quality - Determination of Borate - Spectrometric Method Using Azomethine-H First Edition Water Quality - Sampling in Deep Waters for Macro-Invertebrates - Guidance on the Use of Colonization, Qualitative and Quantitative Samplers First Edition; (CEN EN ISO 9391:1995) Agglomerated Cork Discs - Sealing Behaviour First Edition Thermoplastics valves for industrial applications Pressure test methods and requirements Part 1: General Second Edition Thermoplastics Valves - Pressure Test Methods and Thermoplastics valves for industrial applications - Pressure test methods and requirements - Part 2: Test conditions and basic requirements Second Edition Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Determination of Biocompatibilty by Ocular Study with Rabbit Eyes Second Edition Plastics - Phenolic Resins - Determination of the Gel Time of Resols Under Specific Conditions Using Automatic Apparatus Second Edition Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 1: Flatwork Ironing Machines Second Edition Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 2: Batch Drying Tumblers Second Edition Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 3: Washing Tunnels Second Edition Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 4: Washers-Extractors Second Edition Nickel-Based Alloys - Determination of Resistance to Intergranular Corrosion First Edition; CEN EN ISO 9400: 1995 Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for Pressure Purposes - Full Peripheral Magnetic Transducer/Flux Leakage Testing of Ferromagnetic Steel Tubes for the Detection of Longitudinal Imperfections First Edition

ISO

9403

ISO ISO

9404-1 9405

ISO ISO

9406 9407

ISO ISO ISO

9408 9409-1 9409-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

9413 9414 9415 9416 9418 9424 9426 9427 9431 9437

ISO

9438

ISO ISO ISO

9439 9441 9442

ISO

9443

ISO

9444

ISO ISO ISO

9445 9448-9 9448-10

Crude Petroleum - Transfer Accountability - Guidelines for Cargo Inspection First Edition Enclosures for Protection Against Ionizing Radiation - Lead Shielding Units for 150 mm, 200 mm and 250 mm Thick Walls - Part 1: Chevron Units of 150 mm and 200 mm Thickness First Edition Textile Floor Coverings - Assessment of Changes in Appearance First Edition Carbonaceous Materials for the Production of Aluminium - Green Coke - Determination of Volatile Matter Content by Gravimetric Analysis Second Edition Shoes Sizes - Mondopoint System of Sizing and Marking First Edition; Water Quality - Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium by Determination of Oxygen Demand in a Closed Respirometer Second Edition Manipulating industrial robots Mechanical interfaces Part 1: Plates Third Edition Manipulating industrial robots Mechanical interfaces Part 2: Shafts Second Edition Tyre Valves - Dimensions and Designation Valves Pour Pneumatiques - Dimensions Et Designation First Edition; Amendment 1: 10/01/2001; Amendment 2: 10/15/2004 Woodworking Machines - Curtain Coating Machines - Nomenclature First Edition Woodworking Machines - Wide Belt Sanding Machines - Nomenclature First Edition Paper - Determination of Light Scattering and Absorption Coefficients (Using Kubelka-Munk Theory) First Edition Aerospace - Rivets, Solid, in Aluminium or Aluminium Alloys - Procurement Specification First Edition Wood-based panels Determination of dimensions of test pieces Second Edition Wood-based panels Determination of dimensions of panels First Edition; Replaces ISO 9426-1 Wood-Based Panels - Determination of Density Second Edition Construction Drawings - Spaces for Drawing and for Text, and Title Blocks on Drawing Sheets First Edition Shipbuilding - Inland Vessels - Matrosov Anchors First Edition Metallurgical-Grade Fluorspar - Determination of Total Phosphorus Content - Reduced-Molybdophosphate Spectrometric Method Second Edition Water Quality - Evaluation of Ultimate Biodegradability of Organic Compounds in Aqueous Medium - Carbon Dioxide Evolution Test Second Edition Steel - Determination of Niobium Content - PAR Spectrophotometric Method First Edition (AS/NZS 1050.31: 1994) Steel - Hot-Rolled Ribbed and Grooved Flats for Spring Leaves - Tolerances and Dimensions First Edition Heat-Treatable and Alloy Steels - Surface Quality Classes for Hot-Rolled Round Bars and Wire Rods - Technical Delivery Conditions First Edition Continuously Hot-Rolled Stainless Steel Strip, Plate/Sheet and Cut Lengths - Tolerances on Dimensions and Form Second Edition Continuously Cold-Rolled Stainless Stell Narrow Strip, Wide Strip, Plate/Sheet and Cut Lengths - Tolerances on Dimensions and Form Second Edition Tools for Pressing - Guide Bushes - Part 9: Form B, Ball Cage Bushes, Plain, Type 2 First Edition Tools for Pressing - Guide Bushes - Part 10: Form E, Gliding Bushes, Flanged, Type 2 First Edition

ISO ISO ISO ISO ISO

9448-11 9449 9451 9452 9453

ISO ISO

9454-1 9454-2

ISO

9455-1

ISO

9455-2

ISO ISO

9455-3 9455-5

Tools for Pressing - Guide Bushes - Part 11: Form F, Ball Cage Bushes, Flanged, Type 2 First Edition Tools for moulding ù Centring sleeves Second Edition Woodworking Machines - Hand-Loading Veneering Presses for Flat Surfaces - Nomenclature First Edition Woodworking Machines - Crosswise Veneer Splicing Machines - Nomenclature First Edition Soft Solder Alloys - Chemical Compositions and Forms Second Edition Soft Soldering Fluxes - Classification and Requirements - Part 1: Classification, Labelling and Packaging First Edition (CEN EN 29454-1: 1993) Soft Soldering Fluxes - Classification and Requirements - Part 2: Performance Requirements First Edition Soft Soldering Fluxes - Test Methods - Part 1: Determination of Non- Volatile Matter, Gravimetric Method First Edition (CEN EN 29455-1: 1993) Soft Soldering Fluxes - Test Methods - Part 2: Determination of Non-Volatile Matter, Ebulliometric Method First Edition (CEN EN ISO 9455-2: 1995) Soft Soldering Fluxes - Test Methods - Part 3: Determination of Acid Value, Potentiometric and Visual Titration Methods First Edition; (CEN EN ISO 9455-3: 1994) Soft Soldering Fluxes - Test Methods - Part 5: Copper Mirror Test First Edition (CEN EN 29455-5: 1993)

ISO ISO ISO ISO ISO

9455-6 9455-8 9455-9 9455-10 9455-11

Soft Soldering Fluxes - Test Methods - Part 6: Determination and Detection of Halide (Excluding Fluoride) Content First Edition Soft Soldering Fluxes - Test Methods - Part 8: Determination of Zinc Content First Edition (CEN EN 29455-8: 1993) Soft Soldering Fluxes - Test Methods - Part 9: Determination of Ammonia Content First Edition (CEN EN ISO 9455-9: 1995) Soft Soldering Fluxes - Test Methods - Part 10: Flux Efficancy Tests, Solder Spread Method First Edition Soft Soldering Fluxes - Test Methods - Part 11: Solubility of Flux Residues First Edition (CEN EN 29455-11: 1993)

ISO ISO

9455-12 9455-13

Soft Soldering Fluxes - Test Methods - Part 12: Steel Tube Corrosion Test First Edition (CENELEC EN ISO 9455 -12 - 1994) Soft Soldering Fluxes - Test Methods - Part 13: Determination of Flux Spattering First Edition

ISO ISO ISO

9455-14 9455-15 9455-16

ISO ISO ISO ISO

9455-17 9457-1 9457-2 9458

ISO

9459-1

Soft Soldering Fluxes - Test Methods - Part 14: Assessment of Tackiness of Flux Residues First Edition (CEN EN 29455-14: 1993) Soft Soldering Fluxes - Test Methods - Part 15: Copper Corrosion Test First Edition Soft Soldering Fluxes - Test Methods - Part 16: Flux Efficacy Tests, Wetting Balance Method First Edition Soft soldering fluxes Test methods Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues First Edition Road Vehicles - Metric Starter Motor Pinions - Part 1: Currently Used Pinions First Edition Road Vehicles - Metric Starter Motor Pinions - Part 2: Pinions with 20 Degrees Pressure Angle First Edition Passenger Cars - Starter Motor Electrical Connections First Edition Solar Heating - Domestic Water Heating Systems - Part 1: Performance Rating Procedure Using Indoor Test Methods First Edition AS/NZS 4445.1:1993

ISO

9459-2

ISO ISO ISO

9459-5 9461 9462

ISO ISO ISO ISO

9463 9465 9467 9469

ISO

9473-1

ISO ISO ISO

9473-2 9475 9477

ISO

9486

ISO ISO ISO ISO ISO ISO ISO

9487 9488 9496 9497 9498 9499 9501

ISO ISO

9502 9503

ISO

9504

ISO ISO ISO

9505 9506-1 9506-2

Solar Heating - Domestic Water Heating Systems - Part 2: Outdoor Test Methods for System Performance Characterization and Yearly Performance Prediction of Solar-Only Systems First Edition Solar heating ù Domestic water heating systems ù Part 5: System performance characterization by means of whole-system tests and computer simulation First Edition Hydraulic Fluid Power - Identification of Valve Ports, Subplates, Control Devices and Solenoids First Edition Alpine ski-bindings Requirements and test methods Third Edition Nitric Acid Feed Solutions from Reprocessing Plants - Spectrophotometric Determination of Plutonium After Oxidation to Plutonium (VI) First Edition Alpine Ski-Bindings - Lateral Release Under Impact Loading - Test Method First Edition Forestry Machinery - Portable Chain-Saws and Brush-Cutters - Exhaust System-Caused Fire Risk First Edition Air Cargo Equipment - Unit Load Devices for Transportation of Horses First Edition Textile machinery and accessories Strip steel for dents of reeds Part 1: Cold rolled strip steel First Edition; Together with ISO 94732:2006 Cancels and Replaces ISO 9473:1988 Textile machinery and accessories Strip steel for dents of reeds Part 2: Hardened strip steel First Edition; Together with ISO 94731:2006 Cancels and Replaces ISO 9473:1988 Aircraft Inner Tube and Tubeless Tyre Valves - Cores and Caps - Test Methods First Edition High Strength Cast Steels for General Engineering and Structural Purposes First Edition Workplace Air - Determination of Vaporous Chlorinated Hydrocarbons - Charcoal Tube/Solvent Desorption/ Gas Chromatographic Method First Edition Workplace Air - Determination of Vaporous Aromatic Hydrocarbons - Charcoal Tube/Solvent Desorption/ Gas Chromatographic Method First Edition Solar Energy - Vocabulary Energie Solaire - Vocabulaire First Edition CHILL The ITU-T programming language Fourth Edition Fluorspar - Experimental Methods for Evaluation of Quality Variation First Edition Fluorspar - Experimental Methods for Checking the Bias of Sampling and Sample Preparation First Edition Fluorspar - Method of Determining the Precision of Sampling and Sample Preparation First Edition Metallurgical-Grade Fluorspar - Determination of Total Sulfur Content - Iodometric Method After Combustion First Edition Metallurgical-Grade Fluorspar - Determination of Silica Content - Reduced-Molybdosilicate Spectrometric Method Second Edition Metallurgical-Grade Fluorspar - Determination of Available Fluorine Content - Modified Willard-Winter Method First Edition Metallurgical-Grade Fluorspar - Determination of Antimony Content - Solvent Extraction Atomic Absorption Spectrometric Method Second Edition All Grades of Fluorspar - Determination of Arsenic Content - Silver Diethyldithiocarbamate Spectrometric Method First Edition Industrial Automation Systems - Manufacturing Message Specification - Part 1: Service Definition Second Edition Industrial Automation Systems - Manufacturing Message Specification - Part 2: Protocol Specification Second Edition

ISO

9506-5

ISO ISO ISO ISO

9506-6 9507 9509 9512

ISO

9513

ISO

9514

ISO

9516

ISO ISO ISO ISO ISO ISO

9516-1 9517 9518 9519 9523 9524

ISO

9525

ISO

9526

ISO

9528

ISO

9529-1

ISO ISO ISO ISO

9529-2 9533 9534 9535

Industrial automation systems - Manufacturing message specification - Part 5: Companion Standard for Programmable Controllers Syst×mes d┤automatisation industrielle - SpÚcification de messagerie industrielle - Partie 5: Norme d┤accompagnement pour les Automates Programmables First Edition Industrial automation systems - Manufacturing message specification - Part 6: Companion Standard for Process Control Systeme d'automatisation industrille - Specification de messagerie industrielle - Partie 6: Norme d'accompagnement pour la conduite de procede First Edition Iron Ores - Determination of Total Iron Content - Titanium(III) Chloride Reduction Methods First Edition Water quality Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms Second Edition Cigarettes - Determination of Ventilation - Definitions and Measurement Principles Second Edition Metallic Materials - Calibration of Extensometers Used in Uniaxial Testing Second Edition; Corrected and Reprinted 02/01/2001 Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing Second Edition Iron Ores - Determination of Silicon, Calcium, Manganese, Aluminium, Titanium, Magnesium, Phosphorus, Sulfur and Potassium Wavelength Dispersive X-Ray Fluorescence Spectrometric Method First Edition Iron Ores - Determination of Various Elements by X-ray Fluorescence Spectrometry - Part 1: Comprehensive Procedure First Edition Iron ores ù Determination of water-soluble chloride ù Ion-selective electrode method Second Edition Forestry Machinery - Portable Chain-Saws - Kickback Test Second Edition Shipbuilding and Marine Structures - Rungs for Dog-Step Ladders First Edition (CEN EN 29519: 1994) Touring Ski-Boots for Adults - Interface with Ski-Binding First Edition Machine Tools - Front Faces of Spindle Holders for Machining Centres - Functional Dimensions First Edition Cinematography - Recording Head Gaps for Two Sound Records on 17,5 mm Magnetic Film - Positions and Width Dimensions First Edition Fruits, Vegetables and Derived Products - Determination of Iron Content by Flame Atomic Absorption Spectrometry First Edition Aerospace - Standard-Weight Polytetrafluoroethylene (PTFE) Hose Assemblies, Classification 204 Degrees Celsius/21 000 kPa Procurement Specification Second Edition Information Processing Systems - Data Interchange on 90 mm (3,5 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 15 916 ftprad, on 80 Tracks on Each Side - Part 1: Dimensional, Physical and Magnetic Characteristics First Edition Information Processing Systems - Data Interchange on 90 mm (3,5 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 15 916 ftprad, on 80 Tracks on Each Side - Part 2: Track Format First Edition Earth-Moving Machinery - Machine-Mounted Forward and Reverse Audible Warning Alarm - Sound Test Method First Edition Road Vehicles - Fuel Pump Electric Connections First Edition Woodworking Machines - Machines for Production of Core Stock from Laths - Nomenclature First Edition

ISO ISO ISO ISO

9536 9537 9538 9539

ISO

9541-1

ISO

9541-2

ISO

9541-3

ISO

9542

ISO ISO

9543 9545

ISO

9548-1

ISO ISO ISO ISO

9548-2 9549 9553 9554

ISO

9555-1

ISO

9555-2

ISO

9555-3

ISO

9555-4

ISO ISO ISO

9556 9558 9559

Woodworking Machines - Mortising Machines with Oscillating Tool Action - Nomenclature First Edition Woodworking Machines - Single-End Edge Bonding Machines - Nomenclature First Edition Aerospace - Hydraulic Tubing Joints and Fittings - Planar Flexure Test First Edition Materials for Equipment Used in Gas Welding, Cutting and Allied Processes First Edition Information Technology - Font Information Interchange - Part 1: Architecture First Edition; Technical Corrigendum 1: 10/01/1992; Technical Corrigendum 2: 07/15/1994; Technical Corrigendum 3: 07/01/1995; Amendment 1: 1/15/2001; Amendment 2: 12/15/1998; Amendment 3: 12/15/2000 Information Technology - Font Information Interchange - Part 2: Interchange Format First Edition; Corrigendum 1: 1993; Corrigendum 2: 1995; Amendment 1: 12/15/2000 Information technology - Font information interchange - Part 3: Glyph shape representation First Edition; Amendment 1: 10/01/2005 Information Processing Systems - Telecommunications and Information Exchange between Systems - End System to Intermediate System Routeing Exchange Protocol for Use in Conjunction with the Protocol for Providing the Connectionless-Mode Network Service (ISO 8473) Amendment 1: 09/15/1999 Information Processing Systems - Information Exchange Between Systems - Synchronous Transmission Signal Quality at DTE/DCE Interfaces First Edition Information Technology - Open Systems Interconnection - Application Layer Structure Second Edition Information Technology - Open Systems Interconnection - Connectionless Session Protocol: Protocol Specification First Edition; Amendment 1: 12/15/2000 Information Technology - Open Systems Interconnection - Connectionless Session Protocol: Protocol Implementation Conformance Statement (PICS) Proforma First Edition Information Technology - Galvanic Isolation of Balanced Interchange Circuits First Edition; AS/NZS 4162: 1994 Solar Energy - Methods of Testing Preformed Rubber Seals and Sealing Compounds Used in Collectors First Edition Fibre ropes General specifications Second Edition Measurement of Liquid Flow in Open Channels - Tracer Dilution Methods for the Measurement of Steady Flow - Part 1: General First Edition Measurement of Liquid Flow in Open Channels - Tracer Dilution Methods for the Measurement of Steady Flow - Part 2: Radioactive Tracers First Edition Measurement of Liquid Flow in Open Channels - Tracer Dilution Methods for the Measurement of Steady Flow - Part 3: Chemical Tracers First Edition Measurement of Liquid Flow in Open Channels - Tracer Dilution Methods for the Measurement of Steady Flow - Part 4: Fluorescent Tracers First Edition Steel and Iron - Determination of Total Carbon Content - Infrared Absorption Method After Combustion in an Induction Furnace First Edition; (Corrected and Reprinted -1989) Woodworking Machines - Veneer Slicing Machines - Nomenclature First Edition Photography - 35 mm Filmstrip Projectors - Specifications for Frame Masks First Edition

ISO ISO

9562 9563

ISO

9564-1

ISO

9564-2

ISO ISO ISO

9564-3 9565 9566

ISO ISO

9567 9568

ISO

9574

ISO

9576-1

ISO ISO ISO ISO ISO

9576-2 9579 9583 9584 9585

ISO

9587

ISO ISO ISO

9588 9589 9591

ISO

9592-1

ISO

9592-2

ISO

9592-3

Water Quality - Determination of Adsorbable Organically Bound Halogens (AOX) Third Edition Belt Drives - Electrical Conductivity of Antistatic Endless Synchronous Belts - Characteristics and Test Method First Edition Banking - Personal Identification Number (PIN) Management and Security - Part 1: Basic Principles and Requirements for Online PIN Handling in ATM and POS Systems Second Edition Banking - Personal Identification Number Management and Security - Part 2: Approved Algorithm(s) for PIN Encipherment Second Edition Banking Personal Identification Number management and security Part 3: Requirements for offline PIN handling in ATM and POS systems First Edition Two-Wheeled Motorcycles - Parking Stability of Side- and Centre-Stands First Edition Woodworking Machines - Single-End Tenoning Machines with Several Spindles - Nomenclature First Edition Woodworking Machines - Horizontal Shredding Machines for Wood Wool Production, Quadruple Effect - Nomenclature First Edition Cinematography - Background Acoustic Noise Levels in Theatres, Review Rooms and Dubbing Rooms First Edition Information Technology - Provision of the OSI Connection-Mode Network Service by Packet Mode Terminal Equipment to an Integrated Services Digital Network (ISDN) Second Edition; AS/NZS 4099: 1994 Information Technology - Open Systems Interconnection - Connectionless Presentation Protocol: Protocol Specification Second Edition; Amendment 1: 12/15/2000 Information Technology - Open Systems Interconnection - Connectionless Presentation Protocol: Protocol Implementation Conformance Statement (PICS) Proforma First Edition Information Technology - Remote Database Access for SQL with Security Enhancement Second Edition Implants for Surgery - Non-Destructive Testing - Liquid Penetrant Inspection of Metallic Surgical Implants First Edition Implants for Surgery - Non-Destructive Testing - Radiographic Examination of Cast Metallic Surgical Implants First Edition Implants for Surgery - Determination of Bending Strength and Stiffness of Bone Plates First Edition Metallic and Other Inorganic Coatings - Pretreatment of Iron or Steel to Reduce the Risk of Hydrogen Embrittlement First Edition Metallic and Other Inorganic Coatings - Post-Coating Treatments of Iron or Steel to Reduce the Risk of Hydrogen Embrittlement First Edition Escalators - Building Dimensions First Edition Corrosion of aluminium alloys Determination of resistance to stress corrosion cracking Second Edition Information Technology - Computer Graphics and Image Processing - Programmer┤s Hierarchical Interactive Graphics System (PHIGS) - Part 1: Functional Description Second Edition Information Technology - Computer Graphics and Image Processing - Programmer┤s Hierarchical Interactive Graphics System (PHIGS) - Part 2: Archive File Format Second Edition Information Technology - Computer Graphics and Image Processing - Programmer┤s Hierarchical Interactive Graphics System (PHIGS) - Part 3: Specification for Clear-Text Encoding of Archive File Second Edition

ISO

9593-1

ISO

9593-3

ISO

9593-4

ISO ISO ISO ISO ISO

9594-1 9594-2 9594-3 9594-4 9594-5

ISO ISO ISO

9594-6 CORR 2 9594-6 9594-7

ISO ISO

9594-8 9594-9

ISO ISO

9594-10 9595

ISO

9596-1

ISO ISO

9596-2 9597

ISO

9598

ISO ISO ISO

9599 9606-1 9606-2

Information Processing Systems - Computer Graphics - Programmer┤s Hierarchical Interactive Graphics System (PHIGS) Language Bindings - Part 1: FORTRAN First Edition; Corrigendum 1-1993; Corrigendum 2-1994; Amendment 1- 1995; NZS/ISO/IEC 9593.1: 1990 Information Technology - Computer Graphics - Programmer┤s Hierarchical Interactive Graphics System (PHIGS) Language Bindings - Part 3: Ada First Edition; Amendment 1-1994; Corrigendum 1-1993; Corrigendum 2-1994 Information Technology - Computer Graphics - Programmer┤s Hierarchical Interactive Graphics System (PHIGS) Language Bindings - Part 4: C First Edition; Amendment 1: 05-01-1994; Technical Corrigendum 1: 08-01-1994; Amendment 2: Incorporation of PHIGS Amendments: 12-15-1998 Information technology Open Systems Interconnection The Directory: Overview of concepts, models and services Fifth Edition Information technology Open Systems Interconnection The Directory: Models Fifth Edition Information technology Open Systems Interconnection The Directory: Abstract service definition Fifth Edition Information technology Open Systems Interconnection The Directory: Procedures for distributed operation Fifth Edition Information technology Open Systems Interconnection The Directory: Protocol specifications Fifth Edition Information technology ù Open Systems Interconnection ù The Directory: Selected attribute types TECHNICAL CORRIGENDUM 2 Fifth Edition Information technology Open Systems Interconnection The Directory: Selected attribute types Fifth Edition Information technology Open Systems Interconnection The Directory: Selected object classes Fifth Edition Information technology Open Systems Interconnection The Directory: Publickey and attribute certificate frameworks Fifth Edition Information technology Open Systems Interconnection The Directory: Replication Fourth Edition Information Technology - Open Systems Interconnection - The Directory: Use of Systems Management for Administration of the Directory Third Edition Information Technology - Open Systems Interconnection - Common Management Information Service Third Edition Information Technology - Open Systems Interconnection - Common Management Information Protocol - Part 1: Specification Third Edition; Technical Corrigendum 1: 12/15/1999; Corrigendum 2: 12/01/2002 Information Technology - Open Systems Interconnection - Common Management Information Protocol: Protocol Implementation Conformance Statement (PICS) Proforma First Edition; Technical Corrigendum 1: 06/15/1993; Technical Corrigendum 2: 12/15/1996; Technical Corrigendum 3: 12/15/1998 Cements - Test Methods - Determination of Setting Time and Soundness First Edition Seamless Steel Tubes for Pressure Purposes - Full Peripheral Magnetic Transducer/Flux Leakage Testing of Ferromagnetic Steel Tubes for the Detection of Transverse Imperfections First Edition Copper, Lead and Zinc Sulfide Concentrates - Determination of Hygroscopic Moisture in the Analysis Sample - Gravimetric Method First Edition (PNS 844:1993) Approval Testing of Welders - Fusion Welding - Part 1: Steels First Edition; Amendment 1-1998 Qualification test of welders Fusion welding Part 2: Aluminium and aluminium alloys Second Edition

ISO ISO

9606-3 9606-4

Approval Testing of Welders - Fusion Welding - Part 3: Copper and Copper Alloys First Edition Approval Testing of Welders - Fusion Welding - Part 4: Nickel and Nickel Alloys First Edition

ISO ISO

9606-5 9608

ISO

9609

ISO ISO

9611 9612

ISO ISO

9613-1 9613-2

ISO

9614-1

ISO

9614-2

ISO

9614-3

ISO ISO ISO

9615 9616 9617

ISO ISO

9618 9619

ISO

9622

ISO

9623

Approval Testing of Welders - Fusion Welding - Part 5: Titanium and Titanium Alloys, Zirconium and Zirconium Alloys First Edition V-Belts - Uniformity of Belts - Test Method for Determination of Centre Distance Variation Second Edition Aerospace - Nuts, Hexagonal, Plain, Reduced Height, Normal Across Flats, with MJ Threads, Classifications: 450 MPa (at Ambient Temp.)/120 Deg. C, 450 MPa (at Ambient Temp.)/235 Deg. C, 600 MPa (at Ambient Temp.)/425 Deg. C, 900 MPa (at Ambient Temp.)/235 Deg. C, 900 MPa (at Ambient Temp.)/315 Deg. C, 900 MPa (at Ambient Temp.)/650 Deg. C, 1 100 MPa (at Ambient Temp.)/235 Deg. C, 1 100 MPa (at Ambient Temp.)/730 Deg. C and 1250 MPa (at Ambient Temp.)/600 Deg. C - Dimensions First Edition Acoustics - Characterization of Sources of Structure- Borne Sound with Respect to Sound Radiation from Connected Structures Measurement of Velocity at the Contact Points of Machinery When Resiliently Mounted First Edition Acoustics - Guidelines for the Measurement and Assessment of Exposure to Noise in a Working Environment First Edition Acoustics - Attenuation of Sound During Propagation Outdoors - Part 1: Calculation of the Absorption of Sound by the Atmosphere First Edition Acoustics - Attenuation of Sound During Propagation Outdoors - Part 2: General Method of Calculation First Edition Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 1: Measurement at Discrete Points First Edition (CEN EN ISO 9614-1: 1995) Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 2: Measurement by Scanning First Edition Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 3: Precision Method for Measurement by Scanning First Edition Woodworking Machines - Vertical Shredding Machines for Wood Wool Production, with Hydraulic Clamping - Nomenclature First Edition Woodworking Machines - Circular Sawing Machines for Building Sites - Nomenclature First Edition Woodworking Machines - Lifting Tables and Stages - Nomenclature First Edition Aerospace-Nuts, Hex., Slotted (Castellated), Red. Hght., Norm. Across Flats, With MJ Threads, Cl.s: 450MPa (at Ambient Temp)/120 Deg. C,450MPa (at Ambient Temp)/235 Deg. C, 600MPa(at Ambient Temp)/425 Deg. C, 900MPa(at Ambient Temp)/235 Deg. C, 900Mpa(at Ambient Temp)/315 Deg. C, 900MPa(at Ambient Temp)/650 Deg. C, 1100MPa(at Ambient Temp)/235 Deg. C, 1100MPa(at Ambient Temp)/730 Deg., and 1250MPa First Edition Passenger Cars - Windscreen Wiping Systems - Test Method First Edition Amendment 1; 7/01/2002 Whole Milk - Determination of Milkfat, Protein and Lactose Content - Guidance on the Operation of Mid-Infrared Instruments First Edition PE/Metal and PP/Metal Adaptor Fittings for Pipes for Fluids Under Pressure - Design Lengths and Size of Threads - Metric Series First Edition

ISO ISO ISO ISO ISO ISO ISO

9624 9625 9626 9628 9631 9633 9634

ISO

9635-1

ISO

9635-2

ISO

9635-3

ISO

9635-4

ISO

9635-5

ISO

9636-1

ISO

9636-2

ISO

9636-3

ISO

9636-4

ISO

9636-5

ISO

9636-6

ISO

9637-1

ISO

9637-2

ISO

9638-3

Thermoplastics Pipes for Fluids under Pressure - Mating Dimensions of Flange Adapters and Loose Backing Flanges First Edition Mechanical Joint Fittings for Use with Polyethylene Pressure Pipes for Irrigation Purposes First Edition Stainless Steel Needle Tubing for Manufacture of Medical Devices Amendment 1:06/01/2001 Rolling bearings Insert bearings and eccentric locking collars Boundary dimensions and tolerances Second Edition Rubber seals Joint rings for pipelines for hot-water supply up to 110 ░C Specification for the material Second Edition Cycle Chains - Characteristics and Test Methods Second Edition Aerospace - Fluid Systems - Dimensions of Plastic Protective Caps and Plugs First Edition Agricultural irrigation equipment Irrigation valves Part 1: General requirements First Edition; Together with ISO 9635-2, ISO 9635-3, ISO 9635-4 and ISO 9635-5 replaces ISO 9635:1990 Agricultural irrigation equipment Irrigation valves Part 2: Isolating valves First Edition; Together with ISO 9635-1, ISO 9635-3, ISO 9635-4 and ISO 9635-5 replaces ISO 9635:1990 Agricultural irrigation equipment Irrigation valves Part 3: Check valves First Edition; Together with ISO 9635-1, ISO 9635-2, ISO 9635-4 and ISO 9635-5 replaces ISO 9635:1990 [Superseded: ISO 9952] Agricultural irrigation equipment Irrigation valves Part 4: Air valves First Edition; Together with ISO 9635-1, ISO 9635-2, ISO 9635-3 and ISO 9635-5 replaces ISO 9635:1990 [Superseded: ISO 11419] Agricultural irrigation equipment Irrigation valves Part 5: Control valves First Edition; Together with ISO 9635-1, ISO 9635-2, ISO 9635-3 and ISO 9635-4 replaces ISO 9635:1990 Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 1: Overview, Profiles, and Conformance First Edition Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 2: Control First Edition Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 3: Output First Edition Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 4: Segments First Edition Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 5: Input and Echoing First Edition Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 6: Raster First Edition Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Data Stream Binding - Part 1: Character Encoding First Edition Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Data Stream Binding - Part 2: Binary Encoding First Edition Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Language Bindings - Part 3: Ada First Edition

ISO ISO ISO

9642 9644 9645

ISO

9646-1

ISO

9646-2

ISO

9646-3

ISO

9646-4

ISO

9646-5

ISO

9646-6

ISO

9646-7

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

9647 9648 9649 9650-1 9650-2 9650-3 9652-2 9652-4 9652-5 9653 9654 9655 9656 9657 9658

Cinematography - Time and Control Code for 24, 25 and 30 Frames Per Second Motion-Picture Systems - Specifications First Edition Agricultural Irrigation Equipment - Pressure Losses in Irrigation Valves - Test Method First Edition; Amendment 1-1998 Acoustics - Measurement of Noise Emitted by Two-Wheeled Mopeds in Motion - Engineering Method First Edition Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 1: General Concepts Second Edition; CEN EN 29646-1: 1992; CAN/CSA-ISO/IEC 9646-1-95 CEN EN ISO/IEC 9646-1: 1996 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 2: Abstract Test Suite Specification Second Edition; CAN/CSA-ISO/IEC-9646-2-95; CEN EN ISO/IEC 9646-2: 1996 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 3: The Tree and Tabular Combined Notation (TTCN) Second Edition Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 4: Test Realization Second Edition; CAN/CSA-ISO/IEC 9646-4-95; CEN EN ISO/IEC 9646-4: 1996 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 5: Requirements on Test Laboratories and Clients for the Conformance Assessment Process Second Edition; CAN/CSA-ISO/IEC 9646-5-95; CEN EN ISO/IEC 9646-5: 1996 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 6: Protocol Profile Test Specification First Edition; CEN EN ISO/IEC 9646-6: 1996 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 7: Implementation Conformance Statements First Edition; Corrigendum 1 04/01/1997 Steel and Iron - Determination of Vanadium Content - Flame Atomic Absorption Spectrometric Method First Edition AS/NZS 1050.38: 1994) Sorghum - Determination of Tannin Content First Edition Metallic Materials - Wire - Reverse Torsion Test First Edition Small craft Inflatable liferafts Part 1: Type I First Edition Small craft Inflatable liferafts Part 2: Type II First Edition Small craft Inflatable liferafts Part 3: Material First Edition Masonry - Part 2: Unreinforced Masonry Design by Simple Rules First Edition Masonry - Part 4: Test Methods First Edition Masonry - Part 5: Vocabulary First Edition Adhesives - Test Method for Shear Impact Strength of Adhesive Bonds Second Edition Pliers and nippers for electronics Single-purpose nippers Cutting nippers Second Edition Pliers and nippers for electronics Single-purpose pliers Pliers for gripping and manipulating Second Edition Pliers and nippers for electronics Test methods Second Edition Pliers and nippers for electronics General technical requirements Second Edition Steel - Determination of Aluminium Content - Flame Atomic Absorption Spectrometric Method First Edition

ISO

9660

ISO

9661

ISO

9662

ISO ISO ISO ISO ISO

9664 9665 9666 9667 9668

ISO ISO ISO ISO

9669 9678 9679 9680

ISO ISO

9681 9682-1

ISO ISO ISO

9682-2 9683-1 9684

ISO ISO

9686 9687

ISO

9688

ISO

9689

ISO

9691

ISO ISO

9692-1 9692-2

Information Processing - Volume and File Structure of CD-ROM for Information Interchange First Edition; (Corrected and Reprinted 1988) Information Technology - Data Interchange on 12,7 mm Wide Magnetic Tape Cartridges - 18 Tracks, 1 491 Data Bytes per Millimetre Second Edition Aircraft Equipment - Environmental and Operating Conditions for Airborne Equipment - Humidity, Temperature and Pressure Tests First Edition Adhesives - Test Methods for Fatigue Properties of Structural Adhesives in Tensile Shear First Edition (CEN EN ISO 9664: 1995) Adhesives - Animal Glues - Methods of Sampling and Testing Second Edition Aircraft - Self-Propelled Lavatory-Servicing Vehicle - Functional Requirements First Edition Aircraft Ground Support Equipment - Tow Bars First Edition Pulps - Determination of Magnesium Content - Flame Atomic Absorption Spectrometric Method First Edition Series 1 Freight Containers - Interface Connections for Tank Containers Amendment 1: Sections 3 and 4 First Edition; Amendment 1: 1992 Aircraft - Self-Propelled Potable-Water Vehicle First Edition Aerospace Clamps for fluid systems Test methods First Edition Dentistry ù Operating lights Second Edition Manganese Ores and Concentrates - Determination of Iron Content - Flame Atomic Absorption Spectrometric Method First Edition Iron Ores - Determination of Manganese Content - Part 1: Flame Atomic Absorption Spectrometric Method First Edition Iron ores Determination of manganese content Part 2: Periodate spectrophotometric method First Edition;:1986 [Replaced: ISO 3886] Iron ores Determination of vanadium Part 1: BPHA spectrophotometric method First Edition;:1991 Iron Ores - Determination of Vanadium Content - Flame Atomic Absorption Spectrometric Methods First Edition Direct reduced iron Determination of carbon and/or sulfur High-frequency combustion method with infrared measurement Second Edition Dental Equipment - Graphical Symbols First Edition; (CEN EN ISO 9687: 1995) Mechanical Vibration and Shock - Analytical Methods of Assessing Shock Resistance of Mechanical Systems - Information Exchange Between Suppliers and Users of Analyses First Edition Raw Optical Glass - Resistance to Attack by Aqueous Alkaline Phosphate-Containing Detergent Solutions at 50 Degrees Celsius Testing and Classification First Edition Rubber - Recommendations for the Workmanship of Pipe Joint Rings - Description and Classification of Imperfections First Edition Welding and allied processes Recommendations for joint preparation Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels First Edition; Welding and Allied Processes - Joint Preparation - Part 2: Submerged Arc Welding of Steels First Edition

ISO ISO ISO ISO ISO ISO ISO ISO

9692-3 9692-4 9693 9696 9697 9698 9699 9701

ISO ISO ISO ISO

9702 9704 9705 9706

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

9707 9709 9711-1 9711-2 9712 CORR 1 9712 9713 9714-1 9717 9719 9722 9723 9724 9725 9727-1

ISO ISO

9727-2 9727-3

ISO ISO

9727-4 9727-5

Welding and Allied Processes - Recommendations for Joint Preparation - Part 3: Metal Inert Gas Welding and Tungsten Inert Gas Welding of Aluminium and its Alloys First Edition Welding and allied processes - Recommendations for joint preparation Part 4: Clad steels First Edition Metal-Ceramic Dental Restorative Systems Second Edition; Amendment 1: 10/01/2005 Water Quality - Measurement of Gross Alpha Activity in Non- Saline Water - Thick Source Method First Edition Water Quality - Measurement of Gross Beta Activity in Non- Saline Water First Edition Water Quality - Determination of Tritium Activity Concentration - Liquid Scintillation Counting Method First Edition Performance Standards in Building - Checklist for Briefing - Contents of Brief for Building Design First Edition Wrist and Pocket Watches - Fitting Diameters for Hour, Minute and Second Hands First Edition Plastics - Amine Epoxide Hardeners - Determination of Primary, Secondary and Tertiary Amine Group Nitrogen Content First Edition Passenger Cars - Wiper Systems - Shaft Ends and Arm-Holes First Edition Fire Tests - Full-Scale Room Test for Surface Products First Edition; (Corrigendum 1 - 1993) (Corrected and Reprinted 1996) Information and Documentation - Paper for Documents - Requirements for Permanence First Edition Information and Documentation - Statistics on the Production and Distribution of Books, Newspapers, Periodicals and Electronic Publications First Edition (CEN EN ISO 9707 : 1994) Structural timber - Visual strength grading - Basic principles First Edition Freight Containers - Information Related to Containers on Board Vessels - Part 1: Bay Plan System First Edition Freight Containers - Information Related to Containers on Board Vessels - Part 2: Telex Data Transmission First Edition Non-destructive testing ù Qualification and certification of personnel TECHNICAL CORRIGENDUM 1 Third Edition Non-destructive testing ù Qualification and certification of personnel Third edition Neurosurgical Implants - Self-Closing Intracranial Aneurysm Clips Second Edition Orthopaedic Drilling Instruments - Part 1: Drill Bits, Taps and Countersink Cutters First Edition Phosphate Conversion Coatings for Metals - Method of Specifying Requirements First Edition Root Vegetables - Cold Storage and Refrigerated Transport First Edition Nickel and Nickel Alloys - Composition and Forms of Wrought Products First Edition Nickel and Nickel Alloy Bars First Edition Nickel and Nickel Alloy Wire and Drawing Stock First Edition Nickel and Nickel Alloy Forgings First Edition Cylindrical cork stoppers - Physical tests - Part 1: Determination of dimensions First Edition [Superseded: ISO 9727] Cylindrical cork stoppers ù Physical tests ù Part 2: Determination of mass and apparent density for agglomerated cork stoppers First Edition [Superseded: ISO 9727] Cylindrical cork stoppers ù Physical tests ù Part 3: Determination of humidity content First Edition [Superseded: ISO 9727] Cylindrical cork stoppers ù Physical tests ù Part 4: Determination of dimensional recovery after compression First Edition [Superseded: ISO 9727] Cylindrical cork stoppers ù Physical tests ù Part 5: Determination of extraction force First Edition [Superseded: ISO 9727]

ISO ISO

9727-6 9727-7

Cylindrical cork stoppers ù Physical tests ù Part 6: Determination of liquid tightness First Edition [Superseded: ISO 9727] Cylindrical cork stoppers ù Physical tests ù Part 7: Determination of dust content First Edition [Superseded: ISO 9727] Electronic data interchange for administration, commerce and transport (EDIFACT) Application level syntax rules (Syntax version number: 4, Syntax release number: 1) Part 1: Syntax rules common to all parts Second Edition Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax Version Number: 4, Syntax Release Number: 1) - Part 2: Syntax Rules Specific to Batch EDI Second Edition Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax Version Number: 4, Syntax Release Number: 1) - Part 3: Syntax Rules Specific to Interactive EDI Second Edition Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax Version Number: 4, Syntax Release Number: 1) - Part 4: Syntax and Service Report Message for Batch EDI (Message Type CONTRL) Second Edition Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax Version Number: 4, Syntax Release Number: 1) - Part 5: Security Rules for Batch EDI (Authenticity, Integrity and Non-Repudiation of Origin) Second Edition Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax Version Number: 4, Syntax Release Number: 1) - Part 6: Secure Authentication and Acknowledgement Meassage (Message Type AUTACK) Second Edition

ISO

9735-1

ISO

9735-2

ISO

9735-3

ISO

9735-4

ISO

9735-5

ISO

9735-6

ISO

9735-7

ISO

9735-8

ISO

9735-9

Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax Version Number: 4, Syntax Release Number: 1) - Part 7: Security Rules for Batch EDI (Confidentiality) Second Edition Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax Version Number: 4, Syntax Release Number: 1) - Part 8: Associated Data in EDI Second Edition Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) Application Level Syntax Rules (Syntax Version Number: 4, Syntax Release Number: 1) Part 9: Security Key and Certificate Management Message (Message Type KEYMAN) Second Edition

ISO ISO

9735-10 9736

Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) Application Level Syntax Rules (Syntax Version Number: 4, Syntax Release Number: 1) Part 10: Syntax Service Directories Replaces ISO 9735-1 Thru 9735-9 Aerospace - Eye-Ends, in Steel, Threaded, for Aircraft Control Wire Rope - Dimensions and Loads First Edition

ISO ISO

9737 9738

ISO

9747

Aerospace - Eye-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition Aerospace - Turnbarrels, for Aircraft Control Wire Rope - Dimensions and Loads First Edition Aerospace - Double-Shank Ball-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition

ISO

9748

Aerospace - Ball-Ends, in corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition

ISO ISO

9749 9757

Aerospace - Stud-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition Aerospace - Fork-Ends, in Steel, Threaded, for Aircraft Control Wire Rope Turnbarrels - Dimensions and Loads First Edition

ISO

9758

Aerospace - Fork-Ends, in Steel, Threaded, for Rolling Bearings, for Aircraft Control Wire Rope - Dimensions and Loads First Edition

ISO

9759

ISO

9760

Aerospace - Fork-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition Aerospace - Fork-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope, for Rolling Bearings - Dimensions and Loads First Edition

ISO ISO ISO

9761 9762 9763

ISO

9764

ISO ISO ISO

9765 9766 9768

ISO

9770

ISO

9771

ISO

9772

ISO ISO

9773 9774

ISO

9775

ISO

9776

ISO ISO

9779 9782

Aerospace - Locking Clips, in Corrosion-Resistant Steel, for Aircraft Control Wire Rope Turnbuckles - Dimensions First Edition Aerospace - Aircraft Control Wire Rope Assemblies - Dimensions and End-Fitting Combinations First Edition Aerospace - Aircraft Control Wire Rope Assemblies - Technical Specification First Edition Electric Resistance and Induction Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of the Weld Seam for the Detection of Longitudinal Imperfections First Edition Submerged Arc-Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of the Weld Seam for the Detection of Longitudinal and/or Transverse Imperfections First Edition Drills with Indexable Inserts - Cylindrical Shanks with a Parallel Flat First Edition Tea - Determination of Water Extract Second Edition; Technical Corrigendum 1-1998 Crude Petroleum and Petroleum Products - Compressibility Factors for Hydrocarbons in the Range 638 kg/m3 to 1 074 kg/m3 First Edition; (Corrected and Reprinted -1989) Plastics - Phenolic Resins - Determination of the Pseudo-Adiabatic Temperature Rise of Liquid Resols When Cured Under Acid Conditions Second Edition Cellular Plastics - Determination of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame Second Edition; Amendment 1: 9/15/2003 Plastics - Determination of Burning Behaviour of Thin Flexible Vertical Specimens in Contact with a Small-Flame Ignition Source Second Edition; Amendment 1: 09/15/2003 Thermal insulation for building applications Guidelines for selecting properties First Edition; Replaces TR 9774:1990 Small Craft - Remote Steering Systems for Single Outboard Motors of 15 kW to 40 kW Power First Edition (CEN EN 29775: 1993) Oil of Mentha Arvensis, Partially Dementholized (Mentha Arvensis L. Var. Piperascens Malinv. and Var. Glabrata Holmes) First Edition Metallurgical-Grade Fluorspar - Determination of Lead Content - Solvent Extraction Atomic Absorption Spectrometric Method Second Edition Plastics - Reinforced Moulding Compounds and Prepregs - Determination of Apparent Volatile-Matter Content First Edition

ISO ISO

9785 9787

ISO

9788

ISO

9796-2

ISO

9796-3

ISO

9797-1

ISO ISO

9797-2 9798-1

ISO

9798-2

ISO

9798-3

ISO

9798-4

ISO

9798-5

ISO ISO ISO

9798-6 9801 9802

ISO

9803-1

ISO

9803-2

ISO

9804

ISO

9805-1

ISO

9805-2

Ships and Marine Technology - Ventilation of Cargo Spaces Where Vehicles With Internal Combustion Engines are Driven Calculation of Theoretical Total Airflow Required Second Edition Manipulating Industrial Robots - Coordinate Systems and Motion Nomenclatures Second Edition Air Cargo Equipment - Cast Components of Double Stud Fitting Assembly with a Load Capacity of 22 250 N (5 000 lbf), for Aircraft Cargo Restraint First Edition Information Technology - Security Techniques - Digital Signature Schemes Giving Message Recovery - Part 2: Integer Factorization Based Mechanisms Second Edition Information technology Security techniques Digital signature schemes giving message recovery Part 3: Discrete logarithm based mechanisms Second Edition Information Technology - Security Techniques - Message Authentication Codes (MACs) - Part 1: Mechanisms Using a Block Cipher First Edition; Replaces ISO 9797 Information Technology - Security Techniques - Message Authentication Codes (MACs) - Part 2: Mechanisms Using a Dedicated Hash-Function First Edition; Replaces ISO 9797 Information Technology - Security Techniques - Entity Authentication - Part 1: General Second Edition Information Technology - Security Techniques - Entity Authentication - Part 2: Mechanisms Using Symmetric Encipherment Algorithms Second Edition; Corrigendum 1: 02/01/2004 Information Technology - Security Techniques - Entity Authentication - Part 3: Mechanisms Using Digital Signature Techniques Second Edition Information Technology - Security Techniques - Entity Authentication - Part 4: Mechanisms Using a Cryptographic Check Function Second Edition Information Technology - Security Techniques - Entity Authentication - Part 5: Mechanisms Using Zero-Knowledge Techniques Second Edition Information technology - Security techniques - Entity authentication - Part 6: Mechanisms using manual data transfer First Edition Ophthalmic Instruments - Trial Case Lenses First Edition Raw Optical Glass - Vocabulary First Edition Vacuum technology ù Mounting dimensions of pipeline fittings ù Part 1: Non knife-edge flange type FIRST EDITION [Replaced: ISO 9803] Vacuum technology ù Mounting dimensions of pipeline fittings ù Part 2: Knife-edge flange type FIRST EDITION [Replaced: ISO 9803] Information Technology - Open Systems Interconnection - Service Definition for the Commitment, Concurrency and Recovery Service Element Third Edition Information Technology - Open Systems Interconnection - Protocol for the Commitment, Concurrency and Recovery Service Element: Protocol Specification Third Edition Information Technology - Open Systems Interconnection - Protocol for the Commitment, Concurrency and Recovery Service Element: Protocol Implementation Conformance Statement (PICS) Proforma First Edition

ISO ISO

9806-1 9806-2

ISO

9806-3

ISO

9808

ISO

9809-1

ISO

9809-2

ISO ISO ISO

9809-3 9815 9816

ISO ISO ISO ISO ISO

9817 9818 9825 9826 9827

ISO ISO ISO

9831 9832 9833

ISO

9834-1

ISO

9834-2

ISO

9834-3

ISO

9834-4

ISO

9834-5

Test Methods for Solar Collectors - Part 1: Thermal Performance of Glazed Liquid Heating Collectors Including Pressure Drop First Edition Test Methods for Solar Collectors - Part 2: Qualification Test Procedures First Edition Test Methods for Solar Collectors - Part 3: Thermal Performance of Unglazed Liquid Heating Collectors (Sensible Heat Transfer Only) Including Pressure Drop First Edition Solar Water Heaters - Elastomeric Materials for Absorbers, Connecting Pipes and Fittings - Method of Assessment First Edition Gas Cylinders - Refillable Seamless Steel Gas Cylinders - Design, Construction and Testing - Part 1: Quenched and Tempered Steel Cylinders with Tensile Strength Less Than 1 100 MPa First Edition Gas Cylinders - Refillable Seamless Steel Gas Cylinders - Design, Construction and Testing Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater Than or Equal to 1 100 MPa First Edition Gas Cylinders - Refillable Seamless Steel Gas Cylinders - Design, Construction and Testing - Part 3: Normalized Steel Cylinders First Edition; Together with ISO 9809-1 and ISO 9809-2, Cancels and Replaces ISO 4705:1983 Road Vehicles - Passenger-Car and Trailer Combinations - Lateral Stability Test Second Edition Passenger cars Power-off reaction of a vehicle in a turn Open-loop test method Second Edition Passenger Cars - Engine Cooling Systems - Dimensions of Pressure Caps and Their Ramp Seats on Filler Necks First Edition Passenger Cars - Engine Cooling Systems - Test Methods and Marking of Pressure Caps First Edition Hydrometry Field measurement of discharge in large rivers and rivers in flood Second edition Measurement of Liquid Flow in Open Channels - Parshall and SANIIRI Flumes First Edition Measurement of Liquid Flow in Open Channels by Weirs and Flumes - Streamlined Triangular Profile Weirs First Edition Animal Feeding Stuffs, Animal Products, and Faeces or Urine - Determination of Gross Calorific Value - Bomb Calorimeter Method First Edition Animal and Vegetable Fats and Oils - Determination of Residual Technical Hexane Content Second Edition Melons - Cold Storage and Refrigerated Transport First Edition Information technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: General procedures and top arcs of the ASN.1 Object Identifier tree Second Edition Information Technology - Open Systems Interconnection - Procedures for the Operation of OSI Registration Authorities: - Part 2: Registration Procedures for OSI Document Types First Edition; AS/NZS 4153.2: 1994 Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities: Registration of Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T Third edition Information Technology - Open Systems Interconnection - Procedures for the Operation of OSI Registration Authorities - Part 4: Register of VTE Profiles First Edition Information Technology - Open Systems Interconnection - Procedures for the Operation of OSI Registration Authorities - Part 5: Register of VT Control Object Definitions First Edition (AS/NZS 4153.5: 1993)

ISO

9834-6

ISO

9834-7

ISO ISO ISO ISO ISO ISO ISO ISO

9834-8 9835 9836 9838 9841 9842 9843 9844

ISO ISO ISO ISO

9845-1 9846 9847 9848

ISO

9849

ISO

9851

ISO

9852

ISO

9853

ISO

9854-1

ISO

9854-2

ISO ISO ISO

9855 9856 9862

ISO

9863-1

Information Technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: Registration of application processes and application entities Second edition Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities: Joint ISO and ITU-T Registration of International Organizations Second edition Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities: Joint ISO and ITU-T Registration of International Organizations First edition Ambient Air - Determination of a Black Smoke Index First Edition Performance Standards in Building - Definition and Calculation of Area and Space Indicators First Edition Alpine Ski-Bindings - Test Soles for Ski- Binding Tests First Edition Oil of Hyssop (Hyssopus Officinalis Linnaeus) First Edition Oil of Rose (Rosa x Damascena Miller) Second Edition Oil of Cedarwood, Chinese Type (Cupressus Funebris Endlicher) Second Edition Oil of bitter orange (Citrus aurantium L.) Second Edition Solar Energy - Reference Solar Spectral Irradiance at the Ground at Different Receiving Conditions - Part 1: Direct Normal and Hemispherical Solar Irradiance for Air Mass 1,5 First Edition Solar Energy - Calibration of a Pyranometer Using a Pyrheliometer First Edition Solar Energy - Calibration of Field Pyranometers by Comparison to a Reference Pyranometer First Edition Photography Source document microfilms Determination of ISO speed and ISO average gradient Second Edition Optics and Optical Instruments - Geodetic and Surveying Instruments - Vocabulary Optique Et Instruments D'Optique - Instruments Geodesiques Et D'Observation - Vocabulaire Second Edition Continuous Mechanical Handling Equipment - Overhead Electrical Monorail Conveyors - Definitions and Safety Rules First Edition Unplasticized poly(vinyl chloride) (PVC-U) pipes ù Dichloromethane resistance at specified temperature (DCMT) ù Test method Second Edition Injection-Moulded Unplasticized Poly(Vinyl Chloride) (PVC-U) Fittings for Pressure Pipe Systems - Crushing Test First Edition Thermoplastics Pipes for the Transport of Fluids - Determination of Pendulum Impact Strength by the Charpy Method - Part 1: General Test Method First Edition Thermoplastics Pipes for the Transport of Fluids - Determination of Pendulum Impact Strength by the Charpy Method - Part 2: Test Conditions for Pipes of Various Materials First Edition Ambient Air - Determination of the Particulate Lead Content of Aerosols Collected on Filters - Atomic Absorption Spectrometric Method First Edition Conveyor belts Determination of elastic and permanent elongation and calculation of elastic modulus Second Edition Geosynthetics Sampling and preparation of test specimens Second edition Geosynthetics Determination of thickness at specified pressures Part 1: Single layers First edition; Cancels and replaces ISO 9863:1990

ISO

9863-2

ISO

9864

ISO

9865

ISO

9866-1

ISO ISO

9866-2 9867

ISO ISO ISO ISO ISO ISO

9869 9873 9874 9875 9876 9878

ISO

9882

ISO ISO

9883 9884-1

ISO

9884-2

ISO ISO

9885 9886

ISO

9887

ISO

9888

ISO

9889

ISO

9891

Geotextiles and Geotextile-Related Products - Determination of Thickness at Specified Pressures - Part 2: Procedure for Determination of Thickness of Single Layers of Multilayer Products First Edition CEN EN ISO 9863-2: 1996 Geosynthetics Test method for the determination of mass per unit area of geotextiles and geotextile-related products Second edition Textiles - Determination of Water Repellency of Fabrics by the Bundesmann Rain-Shower Test First Edition; (Corrected and Reprinted -1992) (CEN EN 29865: 1993) Textiles - Effect of Dry Heat on Fabrics Under Low Pressure - Part 1: Procedure for Dry-Heat Treatment of Fabrics First Edition Textiles - Effect of Dry Heat on Fabrics Under Low Pressure - Part 2: Determination of Dimensional Change in Fabrics Exposed to Dry Heat First Edition Textiles - Evaluation of the Wrinkle Recovery of Fabrics - Appearance Method First Edition Thermal Insulation - Building Elements - In-Situ Measurements of Thermal Resistance and Thermal Transmittance First Edition Dental Hand Instruments - Reusable Mirrors and Handles Second Edition; Corrigendum 1: 06-15-2000 Milk Determination of total phosphorus content Method using molecular absorption spectrometry Second Edition Ships and marine technology Marine echo-sounding equipment Third Edition; Technical Corrigendum 1: 02/15/2006 Ships and Marine Technology - Marine Facsimile Receivers for Meteorological Charts Second Edition Micrographics - Graphical Symbols for Use in Microfilming First Edition Performance Standards in Building - Performance Test for Precast Concrete Floors - Behaviour Under Non-Concentrated Load First Edition Performance Standards in Building - Performance Test for Precast Concrete Floors - Behaviour Under Concentrated Load First Edition Tea Sacks - Specification - Part 1: Reference Sack for Palletized and Containerized Transport of Tea First Edition Tea Sacks - Specification - Part 2: Performance Specification for Sacks for Palletized and Containerized Transport of Tea First Edition Wide-Mouth Glass Containers - Deviation from Flatness of Top Sealing Surface - Test Methods First Edition (CEN EN 29885: 1994) Ergonomics Evaluation of thermal strain by physiological measurements Second Edition Water Quality - Evaluation of the Aerobic Biodegradability of Organic Compounds in an Aqueous Medium - Semi-Continuous Activated Sludge Method (SCAS) First Edition; (CEN EN ISO 9887:1994) Water Quality - Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium - Static Test (ZahnWellens Method) Second Edition Determination of Carbon Content in Uranium Dioxide Powder and Sintered Pellets - Resistance Furnace Combustion - Titrimetric /Coulometric/Infrared Absorption Method First Edition Determination of Carbon Content in Uranium Dioxide Powder and Sintered Pellets - High-Frequency Induction Furnace Combustion Titrimetric/Coulometric/ Infrared Absorption Methods First Edition

ISO ISO ISO ISO

9892 9894 9895 9896

ISO ISO ISO

9897 9898 9899

ISO

9902-1

ISO

9902-2

ISO

9902-3

ISO

9902-4

ISO

9902-5

ISO

9902-6

ISO

9902-7

ISO

9903-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO

9903-2 9904 9905 9906 9908 9909 9910 9911 9912-1

Uranium Metal, Uranium Dioxide Powder and Pellets, and Uranyl Nitrate Solutions - Determination of Fluorine Content - Fluoride Ion Selective Electrode Method First Edition Subsampling of Uranium Hexafluoride in the Liquid Phase First Edition Paper and Board - Compressive Strength - Short Span Test First Edition Plastics Traps for Discharge Pipework Systems Inside Buildings First Edition Freight Containers - Container Equipment Data Exchange (CEDEX) - General Communication Codes First Edition; Technical Corrigendum 1 - 06/15/2001 Equipment for Crop Protection - Test Methods for Air-Assisted Sprayers for Bush and Tree Crops First Edition Programming Languages - C Second Edition; Technical Corrigendum 1: 09/01/2001; Technical Corrigendum 2: 11/15/2004 Textile Machinery - Noise Test Code - Part 1: Common Requirements First Edition; Together with ISO 9902-2, ISO 9902-3, ISO 99024, ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993 Textile Machinery - Noise Test Code - Part 2: Spinning Preparatory and Spinning Machinery First Edition; Together with ISO 9902-1, ISO 9902-3, ISO 9902-4, ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993 Textile Machinery - Noise Test Code - Part 3: Nonwoven Machinery First Edition; Together with ISO 9902-1, ISO 9902-2, ISO 9902-4, ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993 Textile Machinery - Noise Test Code - Part 4: Yarn Processing, Cordage and Rope Manufacturing Machinery First Edition; Together with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993 Textile Machinery - Noise Test Code - Part 5: Weaving and Knitting Preparatory Machinery First Edition; Together with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-4, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993 Textile Machinery - Noise Test Code - Part 6: Fabric Manufacturing Machinery First Edition; Together with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-4, ISO 9902-5 and ISO 9902-7 Cancels and Replaces 9902: 1993 Textile Machinery - Noise Test Code - Part 7: Dyeing and Finishing Machinery First Edition; Together with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-4, ISO 9902-5 and ISO 9902-6 Cancels and Replaces 9902: 1993 Textile Machinery and Accessories - Main Dimensions for Section Wires for Metallic Card Clothing - Part 1: Foot Without Interlocking or Interchaining First Edition; Replaces ISO 9903 Textile Machinery and Accessories - Main Dimensions for Section Wires for Metallic Card Clothing - Part 2: Foot with Interchaining First Edition; Replaces ISO 9903 Textile Machinery and Accessories - Steel Pins for Spinning Preparatory and Spinning Machinery Second Edition Technical specifications for centrifugal pumps - Class I First Edition; Corrigendum 1:2005 Rotodynamic Pumps - Hydraulic Performance Acceptance Tests - Grades 1 and 2 First Edition Technical Specifications for Centrifugal Pumps - Class III First Edition Oil of Dalmatian Sage (Salvia Officinalis L.) First Edition Oil of Sweet Orange - Determination of the Total Carotenoids Content First Edition Agricultural irrigation equipment Manually operated small plastics valves Second Edition Agricultural irrigation equipment Filters for micro-irrigation Part 1: Terms, definitions and classification First Edition

ISO ISO ISO ISO ISO ISO

9912-2 9912-3 9915 9916 9917-1 9917-2

ISO

9919

ISO ISO ISO

9920 9921 9923

ISO

9924-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO

9924-2 9926-1 9926-3 9927-1 9927-3 9928-1 9928-2 9930 9931

ISO

9932

ISO ISO ISO ISO ISO

9933 9934-1 9934-2 9934-3 9935

ISO

9936

Agricultural Irrigation Equipment - Filters - Part 2: Strainer-Type Filters First Edition Agricultural Irrigation Equipment - Filters - Part 3: Automatic Self- Cleaning Strainer-Type Filters First Edition Aluminium Alloy Castings - Radiography Testing First Edition Aluminium Alloy and Magnesium Alloy Castings - Liquid Penetrant Inspection First Edition Dentistry Water-based cements Part 1: Powder/liquid acid-base cements First Edition Dental Water-Based Cements - Part 2: Light-Activated Cements First Edition Medical electrical equipment Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use Second edition Ergonomics of the thermal environment ù Estimation of thermal insulation and water vapour resistance of a clothing ensemble Second Edition Ergonomics Assessment of speech communication First Edition Micrographics - Transparent A6 Microfiche - Image Arrangements First Edition Rubber and Rubber Products - Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravimetry Part 1: Butadiene, Ethylene-Propylene Copolymer and Terpolymer, Isobutene-Isoprene, Isoprene and Styrene-Butadiene Rubbers Second Edition Rubber and Rubber Products - Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravimetry Part 2: Acrylonitrile-Butadiene and Halobutyl Rubbers First Edition Cranes - Training of Drivers - Part 1: General First Edition Cranes Training of drivers Part 3: Tower cranes First Edition Cranes - Inspections - Part 1: General First Edition Cranes Inspections Part 3: Tower cranes First Edition Cranes - Crane Driving Manual - Part 1: General First Edition Cranes ù Crane driving manual ù Part 2: Mobile crane operators First Edition Green Beans - Storage and Refrigerated Transport First Edition Coal - Sampling of Pulverized Coal Conveyed by Gases in Direct Fired Coal Systems First Edition Paper and Board - Determination of Water Vapour Transmission Rate of Sheet Materials - Dynamic Sweep and Static Gas Methods First Edition Products in fibre-reinforced cement Long corrugated or asymmetrical section sheets and fittings for roofing and cladding First Edition; Technical Corrigendum 1: 6/1/1999; Amendment 1: 9/15/2004; Technical Corrigendum 2: 5/15/2005 Non-Destructive Testing - Magnetic Particle Testing - Part 1: General Principles First Edition Non-Destructive Testing - Magnetic Particle Testing - Part 2: Detection Media First Edition Non-Destructive Testing - Magnetic Particle Testing - Part 3: Equipment First Edition Non-Destructive Testing - Penetrant Flaw Detectors - General Technical Requirements First Edition Animal and vegetable fats and oils Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography Second Edition

Aerospace - Polytetrafluoroethylene (PTFE) Hose Assemblies, Classification 204 Degrees Celsius/28 000 kPa - Procurement Specification Second Edition Aerospace - Pressure Re-Oiling Connection (New Type) First Edition Cranes - Information Labels - Part 1: General First Edition Cranes - Information Labels - Part 3: Tower Cranes First Edition Shipbuilding - Ventilation and Air- Treatment of Galleys and Pantries with Cooking Appliances First Edition Plastics - Phenolic Resins - Determination of Electrical Conductivity of Resin Extracts First Edition; Corrigendum 1-1997 Information technology ù Portable Operating System Interface (POSIX«) ù Part 1: Base Definitions TECHNICAL CORRIGENDUM 1 Fourth Edition

ISO ISO ISO ISO ISO ISO

9938 9939 9942-1 9942-3 9943 9944

ISO

9945-1 CORR 1

ISO

9945-1

ISO

9945-2 CORR 1

ISO

9945-2

ISO ISO

9945-3 CORR 1 9945-3

ISO

9945-4 CORR 1

ISO ISO

9945-4 9946

ISO ISO ISO ISO ISO ISO ISO ISO ISO

9947 9949-1 9949-2 9949-3 9950 9951 9957-1 9957-2 9957-3

Information technology ù Portable Operating System Interface (POSIX«) ù Part 4: Rationale Second Edition; IEEE Std 1003.1 Manipulating Industrial Robots - Presentation of Characteristics Second Edition Textile Machinery and Accessories - Two-for- One Twisters - Vocabulary MatÚriel pour l┤industrie textile Retordeuses Ó broches double torsion Vocabulaire Second Edition Urine Absorbing Aids - Vocabulary - Part 1: Conditions of Urinary Incontinence First Edition Urine Absorbing Aids - Vocabulary - Part 2: Products First Edition Urine Absorbing Aids - Vocabulary - Part 3: Identification of Product Types First Edition Industrial Quenching Oils - Determination of Cooling Characteristics - Nickel -Alloy Probe Test Method First Edition Measurement of Gas Flow in Closed Conduits - Turbine Meters First Edition; Corrigendum 1: 1994 Fluid Draughting Media - Part 1: Water-Based India Ink - Requirements and Test Conditions First Edition Fluid Draughting Media - Part 2: Water-Based Non- India Ink - Requirements and Test Conditions First Edition Fluid Draughting Media - Part 3: Water-Based Coloured Draughting Inks - Requirements and Test Conditions First Edition

ISO

9958-1

Draughting Media for Technical Drawings - Draughting Film with Polyester Base - Part 1: Requirements and Marking First Edition

Information technology ù Portable Operating System Interface (POSIX«) ù Part 1: Base Definitions Fourth Edition; IEEE 1003.1 Information technology ù Portable Operating System Interface (POSIX«) ù Part 2: System Interfaces TECHNICAL CORRIGENDUM 1 Third Edition Information technology ù Portable Operating System Interface (POSIX«) ù Part 2: System Interfaces Third Edition; IEEE Std 1003.1:2003 Information technology ù Portable Operating System Interface (POSIX«) ù Part 3: Shell and Utilities TECHNICAL CORRIGENDUM 1 Second Edition Information technology ù Portable Operating System Interface (POSIX«) ù Part 3: Shell and Utilities Second Edition Information technology ù Portable Operating System Interface (POSIX«) ù Part 4: Rationale TECHNICAL CORRIGENDUM 1 Second Edition

ISO

9958-2

Draughting Media for Technical Drawings - Draughting Film with Polyester Base - Part 2: Determination of Properties First Edition

ISO ISO ISO ISO ISO ISO

9959-1 9960-1 9960-2 9961 9962-1 9962-2

ISO

9963-1

Numerically Controlled Draughting Machines - Drawing Test for the Evaluation of Performance - Part 1: Vector Plotters First Edition Draughting Instruments with or Without Graduation - Part 1: Draughting Scale Rules First Edition Draughting Instruments with or Without Graduation - Part 2: Protractors First Edition Draughting Media for Technical Drawings - Natural Tracing Paper First Edition Manually Operated Draughting Machines - Part 1: Definitions, Classification and Designation First Edition Manually Operated Draughting Machines - Part 2: Characteristics, Performance, Inspection and Marking First Edition Water Quality - Determination of Alkalinity - Part 1: Determination of Total and Composite Alkalinity First Edition (CEN EN ISO 99631: 1995)

ISO

9963-2

ISO

9964-1

ISO

9964-2

ISO ISO ISO ISO ISO

9964-3 9965 9967 9969 9972

ISO

9973

ISO

9974-1

ISO

9974-2

ISO

9974-3

ISO ISO ISO

9974-4 9975 9978

Water Quality - Determination of Alkalinity - Part 2: Determination of Carbonate Alkalinity First Edition (CEN EN ISO 9963-2: 1995) Water Quality - Determination of Sodium and Potassium - Part 1: Determination of Sodium by Atomic Absorption Spectrometry First Edition Water Quality - Determination of Sodium and Potassium - Part 2: Determination of Potassium by Atomic Absorption Spectrometry First Edition Water Quality - Determination of Sodium and Potassium - Part 3: Determination of Sodium and Potassium by Flame Emission Spectrometry First Edition Water Quality - Determination of Selenium - Atomic Absorption Spectrometric Method (Hydride Technique) First Edition Thermoplastics Pipes - Determination of Creep Ratio First Edition; (CEN EN ISO 9967: 1995) Thermoplastics Pipes - Determination of Ring Stiffness First Edition; (CEN EN ISO 9969: 1995) Thermal performance of buildings Determination of air permeability of buildings Fan pressurization method Second Edition Information technology Computer graphics, image processing and environmental data representation Procedures for registration of items Second Edition Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal- to-Metal Sealing - Part 1: Threaded Ports First Edition Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal- to-Metal Sealing - Part 2: Stud Ends with Elastomeric Sealing (Type E) First Edition Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal- to-Metal Sealing - Part 3: Stud Ends with Metal-to-Metal Sealing (Type B) First Edition Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs Round Non-Alloy Steel Wires for Locked Coil Mine Winding Ropes - Specifications First Edition Radiation Protection - Sealed Radioactive Sources - Leakage Test Methods First Edition

ISO ISO

9980 9981

ISO ISO ISO ISO ISO ISO

9982 9983 9984 9985 9986 9987

ISO

9988-1

ISO

9988-2

ISO

9992-1

ISO ISO

9992-2 9994

ISO ISO

9995-1 9995-2

ISO ISO ISO ISO

9995-3 9995-4 9995-5 9995-6

ISO

9995-7

ISO ISO ISO

9995-8 9996 9997

Belt Drives - Grooved Pulleys for V-Belts (System Based on Effective Width) - Geometrical Inspection of Grooves First Edition Belt Drives - Pulleys and V-Ribbed Belts for the Automotive Industry - PK Profile: Dimensions Second Edition Belt Drives - Pulleys and V-Ribbed Belts for Industrial Applications - Dimensions - PH, PJ, PK, PL and PM Profiles: Dimensions Second Edition Information Technology - Designation of Unrecorded Flexible Disk Cartridges Second Edition Information and Documentation - Transliteration of Georgian Characters into Latin Characters First Edition Information and Documentation - Transliteration of Armenian Characters into Latin Characters First Edition Composition Cork for Shoe Outsoles First Edition Motorcycles - Measurement of Variation of Dipped Beam Inclination as a Function of Load First Edition Plastics - Polyoxymethylene (POM) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Third Edition Plastics - Polyoxymethylene (POM) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties Third Edition Financial Transaction Cards - Messages Between the Integrated Circuit Card and the Card Accepting Device - Part 1: Concepts and Structures First Edition (CEN EN 29992-1: 1993) Financial Transaction Cards - Messages between the Integrated Circuit Card and the Card Accepting Device - Part 2: Functions, Messages (Commands and Responses), Data Elements and Structures First Edition; Technical Corrigendum 1: 12/15/1999 Lighters - Safety Specification Fourth Edition Information technology Keyboard layouts for text and office systems Part 1: General principles governing keyboard layouts Second Edition Information Technology - Keyboard Layouts for Text and Office Systems - Part 2: Alphanumeric Section Second Edition Information Technology - Keyboard Layouts for Text and Office Systems - Part 3: Complementary Layouts of the Alphanumeric Zone of the Alphanumeric Section Second Edition Information Technology - Keyboard Layouts for Text and Office Systems - Part 4: Numeric Section Second Edition Information technology Keyboard layouts for text and office systems Part 5: Editing section Second Edition Information technology Keyboard layouts for text and office systems Part 6: Function section Second Edition Information technology Keyboard layouts for text and office systems Part 7: Symbols used to represent functions Technologies de l┤information Disposition des claviers con us pour la bureautique Partie 7: Symboles employÚs pour la reprÚsentation de fonctions Second Edition Information technology Keyboard layouts for text and office systems Part 8: Allocation of letters to the keys of a numeric keypad Second Edition Mechanical Vibration and Shock - Disturbance to Human Activity and Performance - Classification First Edition Dental Cartridge Syringes Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

9998 9999 CORR 1 9999 10002 10005 10006 10007 10012 10014 CORR 1 10014 10015 10019 10021-1 10021-2

ISO

10021-4

ISO ISO ISO

10021-5 10021-6 10021-7

Water Quality - Practices for Evaluating and Controlling Microbiological Colony Count Media Used in Water Quality Tests First Edition Assistive products for persons with disability ù Classification and terminology Fourth Edition Assistive products for persons with disability ù Classification and terminology Fourth Edition Quality management Customer satisfaction Guidelines for complaints handling in organizations First Edition Quality Management Systems - Guidelines for Quality Plans Second Edition Quality management systems Guidelines for quality management in projects Second Edition Quality management systems Guidelines for configuration management Second Edition Measurement Management Systems - Requirements for Measurement Processes and Measuring Equipment First Edition Quality management ù Guidelines for realizing financial and economic benefits TECHNICAL CORRIGENDUM 1 Quality management Guidelines for realizing financial and economic benefits First Edition;: 1998 [Replaced: ISO TR 10014] Quality Management - Guidelines for Training First Edition Guidelines for the selection of quality management system consultants and use of their services First Edition Information technology Message Handling Systems (MHS) Part 1: System and service overview Second Edition Information Technology - Message Handling Systems (MHS): Overall Architecture Third Edition Information Technology - Message Handling Systems (MHS): Message Transfer System - Abstract Service Definition and Procedures Third Edition Information Technology - Message Handling Systems (MHS): Message Store: Abstract Service Definition Fourth Edition; Incorporates Amendment 1: 1998 and Technical Corrigendum 1: 1998 Information Technology - Message Handling Systems (MHS): Protocol Specifications Third Edition Information Technology - Message Handling Systems (MHS): Interpersonal Messaging System Third Edition

ISO

10021-8

Information technology Message Handling Systems (MHS) Part 8: Electronic Data Interchange Messaging Service Second Edition

ISO ISO ISO

10021-9 10021-10 10022

Information Technology - Message Handling Systems (MHS): Electronic Data Interchange Messaging System Second Edition Information Technology - Message Handling Systems (MHS): MHS Routing Second Edition Information Technology - Open Systems Interconnection - Physical Service Definition Second Edition

ISO

10026-1

Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 1: OSI TP Model Second Edition

ISO

10026-2

ISO

10026-3

ISO

10026-4

Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 2: OSI TP Service Third Edition Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 3: Protocol Specification Third Edition Information Technology - Open Systems Interconnection - Distributed Transaction Processing: Protocol Implementation Conformance Statement (PICS) Proforma First Edition

Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 5: Application Context Proforma and Guidelines When Using OSI TP First Edition Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 6: Unstructured Data Transfer First Edition Information Technology - Information Resource Dictionary System (IRDS) Framework First Edition Information Technology - Telecommunications and Information Exchange Between Systems - Definition of the Relaying Functions of a Network Layer Intermediate System First Edition (AS/NZS 4209: 1994) Information Technology - Telecommunications and Information Exchange Between Systems - End System Routeing Information Exchange Protocol for Use in Conjunction with ISO/IEC 8878 Second Edition

ISO

10026-5

ISO ISO

10026-6 10027

ISO

10028

ISO

10030

ISO

10035-1

ISO

10035-2

ISO ISO

10036 10040

ISO ISO

10042 CORR 1 10042

ISO

10043

ISO ISO ISO ISO ISO

10044 10045 10046 10047 10049

ISO

10050

Information Technology - Open Systems Interconnection - Connectionless Protocol for the Association Control Service Element: Protocol Specification Second Edition; Supersedes ISO 10035; Amendment 1: 12/15/1997; Corrigendum 1:12/15/1999 Information Technology - Open Systems Interconnection - Connectionless Protocol for the Association Control Service Element: Protocol Implementation Conformance Statement (PICS) Proforma First Edition Information technology - Font information interchange - Procedures for registration of font-related identifiers Second Edition; Corrigendum 1: 03-01-2001; Corrigendum 2: 12-01-2002 Information Technology - Open Systems Interconnection - Systems Management Overview Second Edition Welding ù Arc-welded joints in aluminium and its alloys ù Quality levels for imperfections TECHNICAL CORRIGENDUM 1 Second Edition Welding ù Arc-welded joints in aluminium and its alloys ù Quality levels for imperfections Second Edition Banking and Related Financial Services - Information Interchange - Collection Order Form First Edition; Technical Corrigendum 1: 12/15/1999 Banking and Related Financial Services - Information Interchange - Documentary Credit Form First Edition; Technical Corrigendum 1: 12/15/1999 Alpine Skis - Binding Mounting Area - Requirements for Test Screws First Edition Aircraft - Methodology of Calculating Cargo Compartment Volumes First Edition Textiles - Determination of Surface Burning Time of Fabrics First Edition; (CAN/CGSB-4.2 NO.27.11-94) Aluminium Alloy Castings - Visual Method for Assessing the Porosity First Edition Lubricants, industrial oils and related products (class L) Family T (Turbines) Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) First Edition

ISO

10051

Thermal Insulation - Moisture Effects on Heat Transfer - Determination of Thermal Transmissivity of a Moist Material First Edition

ISO ISO

10052 10053

Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method First Edition Acoustics - Measurement of Office Screen Sound Attenuation Under Specific Laboratory Conditions First Edition

ISO ISO

10054 10055

ISO ISO

10056 10058

ISO ISO ISO ISO ISO

10059-1 10059-2 10060 10062 10066

ISO ISO ISO

10068 10069 PT 1 10069 PT 2

ISO ISO ISO ISO ISO ISO ISO ISO

10070 10071-1 10071-2 10072 10073 10074 10075 10075-2

ISO

10075-3

ISO ISO

10076 10077-1

ISO ISO ISO

10077-2 10079-1 10079-2

ISO

10079-3

Internal Combustion Compression-Ignition Engines - Measurement Apparatus for Smoke from Engines Operating Under SteadyState Conditions - Filter-Type Smokemeter First Edition Mechanical Vibration - Vibration Testing Requirements for Shipboard Equipment and Machinery Components First Edition Mechanical Vibration - Measurement and Analysis of Whole-Body Vibration to Which Passengers and Crew are Exposed in Railway Vehicles First Edition Magnesites and Dolomites - Chemical Analysis First Edition (CEN EN ISO 10058: 1996) Dense, Shaped Refractory Products - Determination of Cold Compressive Strength - Part 1: Referee Test Without Packing First Edition Dense, shaped refractory products - Determination of cold compressive strength - Part 2: Test with packing First Edition Dense, Shaped Refractory Products - Test Methods for Products Containing Carbon First Edition Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) Second Edition Flexible Cellular Polymeric Materials - Determination of Creep in Compression First Edition Mechanical Vibration and Shock - Free, Mechanical Impedance of the Human Hand-Arm System at the Driving Point First Edition Tools for Pressing - Elastomer Pressure Springs - Part 1: General Specification First Edition Tools for Pressing - Elastomer Pressure Springs - Part 2: Specification of Accessories First Edition Metallic Powders - Determination of Envelope-Specific Surface Area from Measurements of the Permeability to Air of a Powder Bed Under Steady- State Flow Conditions First Edition Tools for Pressing - Ball-Lock Punches - Part 1: Ball-Lock Punches for Light Duty First Edition Tools for Pressing - Ball-Lock Punches - Part 2: Ball-lock punches for heavy duty First Edition Tools for moulding Sprue bushes Dimensions Second Edition Tools for Moulding - Support Pillars First Edition Specification for Hard Anodic Oxidation Coatings on Aluminium and its Alloys First Edition Ergonomic Principles Related to Mental Work- Load - General Terms and Definitions First Edition Ergonomic Principles Related to Mental Workload - Part 2: Design Principles First Edition Ergonomic principles related to mental workload Part 3: Principles and requirements concerning methods for measuring and assessing mental workload First Edition Metallic Powders - Determination of Particle Size Distribution by Gravitational Sedimentation in a Liquid and Attenuation Measurement First Edition Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 1: General Second Edition Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 2: Numerical method for frames First Edition Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements Second Edition Medical Suction Equipment - Part 2: Manually Powered Suction Equipment Second Edition Medical Suction Equipment - Part 3: Suction Equipment Powered from Vacuum or Pressure Source Second Edition; Replaces ASTM F 960 [Superseded: ASTM F 960]

ISO ISO

10080 10081-1

Refractory Products - Classification of Dense, Shaped Acid-Resisting Products First Edition Classification of dense shaped refractory products Part 1: Alumina-silica Second Edition; Replaces ISO 1109

ISO

10081-2

Classification of dense shaped refractory products Part 2: Basic products containing less than 7 % residual carbon First Edition

ISO ISO ISO ISO ISO ISO

10081-3 10081-4 10082 10083 10084 10086-1

ISO ISO ISO ISO ISO ISO ISO

10086-2 10087 10088 10089 10090 10093 10095

ISO ISO ISO ISO ISO ISO

10096 10097-1 10097-2 10098 10099 10100

Classification of dense shaped refractory products Part 3: Basic products containing from 7 % to 50 % residual carbon First Edition Classification of dense shaped refractory products ù Part 4: Special products First Edition Plastics - Phenolic Resins - Classification and Test Methods Second Edition Oxygen concentrator supply systems for use with medical gas pipeline systems Second Edition Solid Fertilizers - Determination of Mineral -Acid-Soluble Sulfate Content - Gravimetric Method First Edition Coal - Methods for Evaluating Flocculants for Use in Coal Preparation - Part 1: Basic Parameters First Edition Coal Methods for evaluating flocculants for use in coal preparation Part 2: Flocculants as filter aids in rotary vacuum filtration systems First Edition Small craft - Craft identification - Coding system Third Edition Small Craft - Permanently Installed Fuel Systems and Fixed Fuel Tanks Second Edition Information Technology - 130 mm Rewritable Optical Disk Cartridge for Information Interchange First Edition Information Technology - 90 mm Optical Disk Cartridges, Rewritable and Read Only, for Data Interchange First Edition Plastics - Fire Tests - Standard Ignition Sources Second Edition Coffee - Determination of Caffeine Content - Method Using High- Performance Liquid Chromatography First Edition Aerospace - Nuts, Hexagonal, Slotted (Castellated), Red. Ht, Red. Across Flats, with MJ Threads, Cls: 450MPa (at Ambt T)/425 Dgs C, 600MPa (at Ambt T)/235 Dgs. C, 600MPa (at Ambt T)/315 Dgs. C, 600 MPa (at Ambt T)/650 Dgs. C, 900 MPa (at Ambt T)/235 Dgs. C, 900MPa (at Ambt T)/730 Dgs. C, and 1100MPa (at Ambt T)/600 Dgs C - Dims. First Edition Wireline Diamond Core Drilling Equipment - System A - Part 1: Metric Units First Edition Wireline Diamond Core Drilling Equipment - System A - Part 2: Inch Units First Edition Wireline Diamond Core Drilling Equipment - System CSSK First Edition Pneumatic Fluid Power - Cylinders - Final Examination and Acceptance Criteria Second Edition Hydraulic Fluid Power - Cylinders - Acceptance Test Second Edition

ISO ISO ISO

10101-1 10101-2 10101-3

ISO

10102

ISO

10103

Natural Gas - Determination of Water by the Karl Fischer Method - Part 1: Introduction First Edition; (Corrected and Reprinted 1995) Natural Gas - Determination of Water by the Karl Fischer Method - Part 2: Titration Procedure First Edition Natural Gas - Determination of Water by the Karl Fischer Method - Part 3: Coulometric Procedure First Edition Assembly Tools for Screws and Nuts - Double-Headed Open-Ended Engineers┤ Wrenches - Length of Wrenches and Thickness of the Heads Second Edition Assembly Tools for Screws and Nuts - Double-Headed, Flat and Offset, Box Wrenches - Length of Wrenches and Thickness of the Heads Second Edition

ISO ISO

10104 10106

ISO

10109-1

ISO

10109-4

ISO

10109-6

ISO

10109-7

ISO

10109-8

ISO

10109-11

ISO ISO

10109-12 10110-1

ISO

10110-2

ISO

10110-3

ISO

10110-4

ISO

10110-5

ISO

10110-6

ISO

10110-7

ISO

10110-8

ISO

10110-9

ISO

10110-10

Assembly Tools for Screws and Nuts - Double-Headed, Deep Offset and Modified Offset, Box Wrenches - Length of Wrenches and Thickness of the Heads Second Edition Cork Stoppers - Determination of Global Migration First Edition Optics and photonics - Environmental requirements - Part 1: General overview, terms and definitions, climatic zones and their parameters Second Edition Optics and Optical Instruments - Environmental Requirements - Part 4: Test Requirements for Telescopic Systems First Edition; Corrected Version: 5/01/2002 Optics and photonics - Environmental requirements - Part 6: Test requirements for medical optical instruments Second Edition Optics and Optical Instruments - Environmental Requirements - Part 7: Test Requirements for Optical Measuring Instruments First Edition Optics and photonics - Environmental requirements - Part 8: Test requirements for extreme conditions of use Second Edition Optics and Optical Instruments - Environmental Requirements - Part 11: Optical Instruments for Outdoor Conditions of Use First Edition Optics and optical instruments Environmental requirements Part 12: Conditions of transport for optical instruments First Edition Optics and photonics Preparation of drawings for optical elements and systems Part 1: General Second Edition Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 2: Material Imperfections - Stress Birefringence First Edition Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 3: Material Imperfections Bubbles and Inclusions First Edition Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 4: Material Imperfections Inhomogeneity and Striae First Edition Optics and photonics ù Preparation of drawings for optical elements and systems ù Part 5: Surface form tolerances Second Edition Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 6: Centring Tolerances First Edition; Technical Corrigendum 1:04/01/1999 Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 7: Surface Imperfection Tolerances First Edition Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 8: Surface Texture First Edition Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 9: Surface Treatment and Coating First Edition Optics and photonics Preparation of drawings for optical elements and systems Part 10: Table representing data of optical elements and cemented assemblies Second Edition

ISO

10110-11

ISO

10110-12

ISO

10110-14

ISO

10110-17

ISO ISO ISO ISO ISO ISO

10111 10112 10113 10115 10116 10118-1

ISO

10118-2 CORR 2

ISO

10118-2 CORR 1

ISO

10118-2

ISO ISO

10118-3 AMD 1 10118-3

ISO ISO ISO ISO

10118-4 10119 10122 10123

ISO ISO ISO

10124 10126-1 10126-2

ISO ISO

10129 10131-1

Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 11: Non-Toleranced Data First Edition; Corrigendum 1: 09/01/2006 Optics and photonics ù Preparation of drawings for optical elements and systems ù Part 12: Aspheric surfaces Second edition Optics and photonics ù Preparation of drawings for optical elements and systems ù Part 14: Wavefront deformation tolerance Second edition Optics and photonics Preparation of drawings for optical elements and systems Part 17: Laser irradiation damage threshold First edition Metallic and Other Inorganic Coatings - Measurement of Mass Per Unit Area - Review of Gravimetric and Chemical Analysis Methods First Edition Damping Materials - Graphical Presentation of the Complex Modulus First Edition Metallic materials Sheet and strip Determination of plastic strain ratio Second Edition Oil of Tarragon (Artemisia Dracunculus L.), French Type First Edition Information technology Security techniques Modes of operation for an n-bit block cipher Third Edition Information Technology - Security Techniques - Hash-Functions - Part 1: General Second Edition Information technology ù Security techniques ù Hash-functions ù Part 2: Hash-functions using an n-bit block cipher TECHNICAL CORRIGENDUM 2 Information technology ù Security techniques ù Hash-functions ù Part 2: Hash-functions using an n-bit block cipher TECHNICAL CORRIGENDUM 1 Second Edition Information technology ù Security techniques ù Hash-functions ù Part 2: Hash-functions using an n-bit block cipher Second Edition Information technology ù Security techniques ù Hash-functions ù Part 3: Dedicated hash-functions AMENDMENT 1: Dedicated HashFunction 8 (SHA-224) Third Edition Information technology ù Security techniques ù Hash-functions ù Part 3: Dedicated hash-functions Third Edition Information Technology - Security Techniques - Hash-Functions - Part 4: Hash-Functions Using Modular Arithmetic First Edition Carbon Fibre - Determination of Density Second Edition Reinforcement Materials - Tubular Braided Sleeves - Basis for a Specification First Edition Adhesives - Determination of Shear Strength of Anaerobic Adhesives Using Pin-and-Collar Specimens First Edition Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for Pressure Purposes - Ultrasonic Testing for the Detection of Laminar Imperfections First Edition Banking - Procedures for Message Encipherment (Wholesale) - Part 1: General Principles First Edition Banking - Procedures for Message Encipherment (Wholesale) - Part 2: DEA Algorithm First Edition Plain bearings Testing of bearing metals Resistance to corrosion by lubricants under static conditions First Edition; Supersedes ISO/TR 10129: 1993 Foldaway Beds - Safety Requirements and Tests - Part 1: Safety Requirements First Edition

ISO ISO ISO ISO ISO

10131-2 10132 10133 10134 10135

ISO

10136-1

ISO

10136-2

ISO

10136-3

ISO

10136-4

ISO

10136-5

ISO ISO

10136-6 10137

ISO

10138

ISO ISO ISO

10139-1 CORR 1 10139-1 10139-2

ISO

10142

ISO ISO ISO ISO ISO

10143 10144 10145-1 10145-2 10146

ISO ISO ISO

10147 10149 10153

Foldaway Beds - Safety Requirements and Tests - Part 2: Test Methods First Edition Textiles - Textured Filament Yarn - Definitions First Edition Small Craft - Electrical Systems - Extra-Low-Voltage d.c. Installations Second Edition Small Craft - Electrical Devices - Lightning-Protection Systems Second Edition Technical Drawings - Simplified Representation of Moulded, Cast and Forged Parts First Edition Glass and Glassware - Analysis of Extract Solutions - Part 1: Determination of Silicon Dioxide by Molecular Absorption Spectrometry First Edition Glass and Glassware - Analysis of Extract Solutions - Part 2: Determination of Sodium Oxide and Potassium Oxide by Flame Spectrometric Methods First Edition Glass and Glassware - Analysis of Extract Solutions - Part 3: Determination of Calcium Oxide and Magnesium Oxide by Flame Atomic Absorption Spectrometry First Edition Glass and Glassware - Analysis of Extract Solutions - Part 4: Determination of Aluminium Oxide by Molecular Absorption Spectrometry First Edition Glass and Glassware - Analysis of Extract Solutions - Part 5: Determination of Iron(III) Oxide by Molecular Absorption Spectrometry and Flame Atomic Absorption Spectrometry First Edition Glass and Glassware - Analysis of Extract Solutions - Part 6: Determination of Boron(III) Oxide by Molecular Absorption Spectrometry First Edition Bases for Design of Structures - Serviceability of Buildings Against Vibration First Edition Steel and Iron - Determination of Chromium Content - Flame Atomic Absorption Spectrometric Method First Edition (AS/NZS 1050.39: 1994) Dentistry ù Soft lining materials for removable dentures ù Part 1 Materials for short-term use TECHNICAL CORRIGENDUM 1 Second Edition Dentistry ù Soft lining materials for removable dentures ù Part 1: Materials for short-term use Second Edition Dentistry - Soft Lining Materials for Removable Dentures - Part 2: Materials for Long-Term Use First Edition Carbonaceous Materials for Use in the Production of Aluminium - Calcined Coke - Determination of Grain Stability Using a Laboratory Vibration Mill First Edition Carbonaceous Materials for the Production of Aluminium - Calcined Coke for Electrodes - Determination of the Electrical Resistivity of Granules First Edition Certification Scheme for Steel Bars and Wires for the Reinforcement of Concrete Structures First Edition End Mills with Brazed Helical Hardmetal Tips - Part 1: Dimensions of End Mills with Parallel Shank First Edition End Mills with Brazed Helical Hardmetal Tips - Part 2: Dimensions of End Mills with 7/24 Taper Shank First Edition Crosslinked Polyethylene (PE-X) Pipes - Effect of Time and Temperature on the Expected Strength First Edition Pipes and Fittings Made of Crosslinked Polyethylene (PE-X) - Estimation of the Degree of Crosslinking by Determination of the Gel Content Second Edition Information Technology - Data Interchange on Read-Only 120 mm Optical Data Disks (CD-ROM) Second Edition Steel - Determination of Boron Content - Curcumin Spectrophotometric Method Second Edition

ISO

10154

Light Gauge Metal Containers - Three-Piece Necked-in Tinplate Aerosol Cans - Dimensions of the Top End First Edition Stationary Source Emissions - Automated Monitoring of Mass Concentrations of Particles - Performance Characteristics, Test Methods and Specifications First Edition Corrigendum 1: 02/15/2002 Gases and Gas Mixtures - Determination of Fire Potential and Oxidizing Ability for the Selection of Cylinder Valve Outlets Second Edition Gas cylinders Gases and gas mixtures Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures First Edition; Together with ISO 10156-1 Supersedes ISO 10156:1996 Photography - Flash Exposure Meter - Requirements First Edition; (Corrected and Reprinted - 1991) Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Service Definition Second Edition; Amendment 1: 11/01/2002 Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 1: Protocol Specification Second Edition; Amendment 1: 11/01/2002; Amendment 2: 11/01/2002 Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 2: Protocol Implementation Conformance Statement (PICS) Proforma First Edition

ISO

10155

ISO

10156

ISO ISO

10156-2 10157

ISO

10160

ISO

10161-1

ISO

10161-2

ISO

10164-1

ISO

10164-2

ISO

10164-3

ISO

10164-4

ISO

10164-5

Information Technology - Open Systems Interconnection - Systems Management: Attributes for Representing Relationships First Edition; CCITT RECMN X.733; CAN/CSA-ISO/IEC-10164-3-95; Amendment 1 - 05/15/1996; Corrigendum 1 - 12/15/1996 Information Technology - Open Systems Interconnection - Systems Management: Alarm Reporting Function First Edition; CCITT RECMN X.733; Corrigendum 1-12/15/1996; AS/NZS 4152.4: 1994; Amendment 1- 12/15/1995; CAN/CSA-ISO/IEC 10164-4-95; Corrigendum 1-09/01/1994; Corrigendum 1-12/15/1996; Technical Corrigendum 2-12/15/1999 Information Technology - Open Systems Interconnection - Systems Management: Event Report Management Function First Edition; CCITT RECMN X.734; Corrigendum 1-12/15/1996; AS/NZS 4152.5: 1994; Amendment 1-12/15/1995; Technical Corrigendum 212/15/1999

ISO

10164-6

Information Technology - Open Systems Interconnection - Systems Management: Log Control Function First Edition; CAN/CSAISO/IEC 10164-6-95; Amendment 1: 05/15/1996; Corrigendum 1: 12/15/1996; Technical Corrigendum 1: 03/01/2003

ISO

10164-7

Information Technology - Open Systems Interconnection - Systems Management: Security Alarm Reporting Function First Edition; CCITT RECMN X.736; AS/NZS 4152.7: 1993; Amendment 1-1995; CAN/CSA-ISO/IEC 10164-7-95; Corrigendum 1-1996

Information Technology - Open Systems Interconnection - Systems Management: Object Management Function First Edition; CCITT RECMN X.730; AS/NZS 4152.1: 1994; CAN/CSA-ISO/IEC-10164-1-95; Amendment 1-1996; Corrigendum 1-1996 Information Technology - Open Systems Interconnection - Systems Management: State Management Function Amendment 2: Amendment to Support Lifecycle State First Edition; CCITT RECMN X.731; AS/NZS 4152.2: 1994; CAN/CSA-ISO/IEC-10164-2-95; Amendment 1-1996; Corrigendum 1-1996; Amendment 2: 03/01/2002; Corrigendum 2: 4/15/2002

ISO

10164-8

Information Technology - Open Systems Interconnection - Systems Management: Security Audit Trail Function First Edition; Technical Corrigendum 1: 12/15/1995; Technical Corrigendum 2: 12/15/1996; Technical Corrigendum 3: 11/01/1999

ISO

10164-9

Information Technology - Open Systems Interconnection - Systems Management: Objects and Attributes for Access Control First Edition; Technical Corrigendum 1: 12-15-1996; Technical Corrigendum 2: 11-01-1999; Technical Corrigendum 3: 04/15/2002

ISO

10164-10

ISO

10164-11

ISO

10164-12

ISO

10164-13

ISO ISO

10164-14 10164-15

ISO

10164-16

ISO

10164-17

ISO

10164-18

ISO

10164-19

ISO

10164-20

ISO

10164-21

ISO

10164-22

ISO

10165-1

Information Technology - Open Systems Interconnection - Systems Management: Usage Metering Function for Accounting Purposes First Edition; Amendment 1: 12-15-1998; Technical Corrigendum 1: 11-01-1999; Technical Corrigendum 2: 4/15/2002 Information Technology - Open Systems Interconnection - Systems Management: Metric Objects and Attributes First Edition; Amendment 1: 12-15-1998; Technical Corrigendum 1: 11-01-1999 Information Technology - Open Systems Interconnection - Systems Management: Test Management Function First Edition; Technical Corrigendum 1: 10-15-1998; Technical Corrigendum 2: 11-01-1999; Technical Corrigendum 3: 4/15/2002 Information Technology - Open Systems Interconnection - Systems Management: Summarization Function First Edition; Amendment 1 04-01-97; Corrigendum 1: 11-15-99; Corrigendum 2: 04-15-2002 Information Technology - Open Systems Interconnection - Systems Management: Confidence and Diagnostic Test Categories First Edition; Technical Corrigendum 1:12/15/1999; Technical Corrigendum 2: 4/15/2002; Technical Corrigendum 3: 4/15/2002 Information technology Open Systems Interconnection Systems management: Scheduling function Second Edition Information Technology - Open Systems Interconnection - Systems Management: Management Knowledge Management Function First Edition; Amendment 1:12/15/1998; Corrigendum 1: 02/01/2002 Information Technology - Open Systems Interconnection - Systems Management: Change over Function First Edition; ITU-T Rec.X.751 1995; Technical Corrigendum 1 06/15/1999; Technical Corrigendum 2: 02/01/2002 Information Technology - Open Systems Interconnection - Systems Management: Software Management Function First Edition; ITUT Rec.X.744 1996; Technical Corrigendum 1 06/15/1999; Technical Corrigendum 2: 03/01/2002; Technical Corrigendum 3: 03/01/2002 Information Technology - Open Systems Interconnection - Systems Management: Management Domain and Management Policy Management Function First Edition Information Technology - Open Systems Interconnection - Systems Management: Time Management Function First Edition; ITU-T Rec.X.743 1998; Technical Corrigendum 1: 02/01/2002 Information Technology - Open Systems Interconnection - Systems Management: Command Sequencer for Systems Management First Edition Information Technology - Open Systems Interconnection - Systems Management: Response Time Monitoring Function First Edition Information Technology - Open Systems Interconnection - Structure of Management Information: Management Information Model First Edition; (Corrigendum 1-1994) (AS/NZS 4151.1: 1994) (Amendment 1-1996)

Information Technology - Open Systems Interconnection - Structure of Management Information: Definition of Management Information First Edition; Technical Corrigendum 1: 09-01-1994; Technical Corrigendum 2: 12-15-1996; Technical Corrigendum 3: 1015-1999 Information Technology - Open Systems Interconnection - Structure of Management Information: Definition of Management Information Amendment 1: States to Support Lifecycle 2003 Information Technology - Open Systems Interconnection - Structure of Management Information: Definition of Management Information Amendment 2: Enhanced Event Control 1996 Information Technology - Open Systems Interconnection - Structure of Management Information: Guidelines for the Definition of Managed Objects First Edition; Amendment 1: 08/01/1996; Corrigendum 1: 12/15/1996; Amendment 2: 12/15/1998 and Amendment 3: 12/15/1998; Corrigendum 2: 2/01/2003 Information Technology - Open Systems Interconnection - Structure of Management Information: Guidelines for the Definition of Managed Objects Amendment 4: GDMO+: Specifying the Behaviour of Managed Objects 1997 Information Technology - Open Systems Interconnection - Structure of Management Information: Generic Management Information First Edition; Corrigendum 1: 12/15/1998; Corrigendum 2: 4/15/2002 Information Technology - Open Systems Interconnection - Structure of Management Information: Requirements and Guidelines for Implementation Conformance Statement Proformas Associated with OSI Management Second Edition Information Technology - Open Systems Interconnection - Structure of Management Information: General Relationship Model First Edition Information Technology - Open Systems Interconnection - Structure of Management Information: Managed Objects for Supporting Upper Layers First Edition Information Technology - Open Systems Interconnection - Structure of Management Information: Systems Management Application Layer Managed Objects First Edition Information Technology - Text and Office Systems - Document Filing and Retrieval (DFR) - Part 1: Abstract Service Definition and Procedures First Edition; Corrigendum 1-1994; Corrigendum 2-1994; Corrigendum 3-1994; Corrigendum 4-1998; Amendment 11995; Amendment 2-1996

ISO

10165-2

ISO

10165-2 DAM 1

ISO

10165-2 DAM 2

ISO ISO

10165-4 10165-4 DRAFT AMD 4

ISO

10165-5

ISO

10165-6

ISO

10165-7

ISO

10165-8

ISO

10165-9

ISO

10166-1

ISO

10166-2

ISO

10173

ISO

10175-1

Information Technology - Text and Office Systems - Document Filing and Retrieval (DFR) - Part 2: Protocol Specification First Edition; (Corrigendum 1-1994) (Corrigendum 2-1995) (Amendment 1-1995) (AS/NZS 4167.2: 1994) (Amendment 2-1996) Information Technology - Telecommunications and Information Exchange between Systems - Interface Connector and Contact Assignments for ISDN Primary Rate Access Connector Located at Reference Points S and T Second Edition Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 1: Abstract Service Definition and Procedures First Edition; Technical Corrigendum 1: 07/01/1998; Technical Corrigendum 2: 11/15/1998; Technical Corrigendum 3: 12/01/1998; Technical Corrigendum 4: 12/01/1998

ISO

10175-2

Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 2: Protocol Specification First Edition

ISO

10175-3

ISO

10177

ISO

10179

ISO ISO

10180 10181-1

ISO

10181-2

ISO

10181-3

ISO

10181-4

ISO

10181-5

ISO

10181-6

ISO ISO ISO ISO ISO

10181-7 10185 10190 10191 10192-1

ISO ISO ISO ISO ISO ISO ISO

10193 10196 10197 10198 10203 10204 10206

ISO

10207

Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 3: Management Abstract Service Definitions and Procedures First Edition Information Technology - Telecommunications and Information Exchange Between Systems - Provision of the Connection-Mode Network Internal Layer Service by Intermediate Systems Using ISO/IEC 8208, the X.25 Packet Layer Protocol First Edition; AS/NZS 4217: 1994 Information Technology - Processing Languages - Document Style Semantics and Specification Language (DSSSL) First Edition; Corrigendum 1: 03-01-2001; Amendment 1: 10-01-2003; Amendment 2: 08-15-2005 Information Technology - Processing Languages - Standard Page Description Language (SPDL) First Edition; Corrigendum 1: 10/15/2001 Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Overview First Edition Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Authentication Framework First Edition Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Access Control Framework First Edition Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Non-Repudiation Framework First Edition Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Confidentiality Framework First Edition Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Integrity Framework First Edition Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Security Audit and Alarms Framework First Edition Tobacco and Tobacco Products - Vocabulary Tabac et produits du tabac Vocabulaire Second Edition Motor Cycle Chains - Characteristics and Test Methods First Edition Passenger Car Tyres - Verifying Tyre Capabilities - Laboratory Test Methods Second Edition; Amendment 1: 09/01/1998 Information Technology - Home Electronic System (HES) Interfaces Part 1: Universal Interface (UI) Class 1 First edition General Use Light Gauge Metal Containers - Nominal Filling Volumes of Round Cylindrical and Tapered Containers of up to 40 000 ml First Edition Cancels and Replaces Both ISO/TR 10193: 1989 and ISO 11944:1993 Document Imaging Applications - Recommendations for the Creation of Original Documents Second Edition Micrographics - Reader-Printers for Transparent Microforms - Characteristics First Edition Micrographics - Rotary Camera for 16 mm Microfilm - Mechanical and Optical Characteristics First Edition Iron Ores - Determination of Calcium - Flame Atomic Absorption Spectrometric Method Second Edition Iron Ores - Determination of Magnesium - Flame Atomic Absorption Spectrometric Method Second Edition Information Technology - Programming Languages - Extended Pascal First Edition Rock Drilling Equipment - Rope Threaded Drill Steel Equipment for Percussive Drilling, Nominal Sizes 22 mm to 38 mm First Edition; Corrigendum 1: 1991

ISO

10208

ISO

10209-1

ISO

10209-2

ISO

10209-4

ISO

10211-1

ISO ISO

10211-2 10213

ISO

10215

ISO ISO ISO ISO ISO ISO ISO

10216 10218-1 CORR 1 10218-1 10223 10226 10227 10228

ISO ISO ISO

10229 10230 10231

ISO

10236

ISO

10237

ISO ISO ISO ISO

10238 10239 10240 10241

Rock Drilling Equipment - Left-Hand Rope Threads First Edition Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of Drawings First Edition; Technical Product Documentation - Vocabulary - Part 2: Terms Relating to Projection Methods First Edition; (Corrected and Reprinted - 1994) (CEN EN ISO 10209-2: 1996) Technical Product Documentation - Vocabulary - Part 4: Terms Relating to Construction Documentation Documentation Technique De Produit - Vocabulaire - Parte 4: Termes Relatifs A La Documentation Des Constructions First Edition Thermal Bridges in Building Construction - Heat Flows and Surface Temperatures - Part 1: General Calculation Methods First Edition (CEN EN ISO 10211-1: 1995) Technical Corrigendum: 5/01/2002 Thermal Bridges in Building Construction - Calculation of Heat Flows and Surface Temperatures - Part 2: Linear Thermal Bridges First Edition Aluminium Ores - Determination of Total Iron Content - Titanium Trichloride Reduction Method First Edition Anodized Aluminium and Aluminium Alloys - Visual Determination of Image Clarity of Anodic Oxidation Coatings - Chart Scale Method First Edition Anodized Aluminium and Aluminium Alloys - Instrumental Determination of Image Clarity of Anodic Oxidation Coatings - Instrumental Method First Edition Robots for industrial environments ù Safety requirements ù Part 1: Robot TECHNICAL CORRIGENDUM 1 First Edition Robots for industrial environments Safety requirements Part 1: Robot First Edition; Supersedes ISO 10218:1992 Textile machinery and accessories Flat warp knitting machines Numbering of guide bars Second Edition Aluminium Ores - Experimental Methods for Checking the Bias of Sampling First Edition Human/Human Surrogate Impact (Single Shock) Testing and Evaluation - Guidance on Technical Aspects First Edition Cross-Country Skis - Binding Mounting Area - Requirements for Test Screws First Edition Water Quality - Determination of the Prolonged Toxicity of Substances to Freshwater Fish - Method for Evaluating the Effects of Substances on the Growth Rate of Rainbow Trout (Oncorhynchus Mykiss Walbaum (Teleostei, Salmonidae) First Edition Cycles - Splined Hub and Sprocket - Mating Dimensions First Edition Motorcycle tyres Test methods for verifying tyre capabilities Third edition Carbonaceous Materials for the Production of Aluminium - Green Coke and Calcined Coke for Electrodes - Determination of Bulk Density (Tapped) First Edition Carbonaceous Materials for Use in the Production of Aluminium - Calcined Coke - Determination of Residual-Hydrogen Content First Edition Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Determination of Sulfur Content by an Instrumental Method First Edition Small Craft - Liquefied Petroleum Gas (LPG) Systems First Edition; Technical Corrigendum 1: 07/15/2001 Small Craft - Owner┤s Manual Second Edition International Terminology Standards - Preparation and Layout First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

10242-1 10242-2 10242-3 10243 10245-1 10245-2 10245-3 10245-4 CORR 1 10245-4 10245-5 10247 10248 10249 10251

ISO ISO ISO ISO

10253 10254 10256 10258

ISO ISO

10260 10261

ISO ISO ISO

10262 10263-1 10263-2

ISO

10263-3

ISO

10263-4

ISO

10263-5

ISO ISO

10263-6 10264

Tools for Pressing - Punch Holder Shanks - Part 1: Type A Second Edition Tools for Pressing - Punch Holder Shanks - Part 2: Type C First Edition Tools for Pressing - Punch Holder Shanks - Part 3: Type D First Edition Tools for Pressing - Compression Springs with Rectangular Section - Housing Dimensions and Colour Coding First Edition Cranes - Limiting and Indicating Devices - Part 1: General First Edition Cranes - Limiting and Indicating Devices - Part 2: Mobile Cranes First Edition Cranes - Limiting and Indicating Devices - Part 3: Tower Cranes First Edition Cranes ù Limiting and indicating devices Part 4: Jib cranes TECHNICAL CORRIGENDUM 1 First Edition Cranes ù Limiting and indicating devices ù Part 4: Jib cranes First Edition Cranes - Limiting and Indicating Devices - Part 5: Overhead Travelling and Portal Bridge Cranes First Edition Conveyor belts - Characteristics of covers - Classification First Edition; Amendment 1: 01/15/2006 Fluid Fertilizers - De-Aeration of Suspension Samples by Film Disentrainment First Edition Fluid Fertilizers - Preliminary Visual Examination and Preparation of Samples for Physical Testing First Edition Copper, lead, zinc and nickel concentrates Determination of mass loss of bulk material on drying Second Edition Water Quality - Marine Algal Growth Inhibition Test with Skeletonema Costatum and Phaeodactylum Tricornutum Second Edition Air Cargo and Ground Equipment - Vocabulary First Edition Head and face protection for use in ice hockey Second Edition; Copper Sulfide Concentrates - Determination of Copper Content - Titrimetric Methods First Edition Water Quality - Measurement of Biochemical Parameters - Spectrometric Determination of the Chlorophyll-a Concentration First Edition Earth-Moving Machinery - Product Identification Numbering System Second Edition Earth-Moving Machinery - Hydraulic Excavators - Laboratory Tests and Perfomance Requirements for Operator Protective Guards First Edition Earth-Moving Machinery - Operator Enclosure Environment - Part 1: General and Definitions First Edition Earth-Moving Machinery - Operator Enclosure Environment - Part 2: Air Filter Test First Edition Earth-Moving Machinery - Operator Enclosure Environment - Part 3: Operator Enclosure Pressurization Test Method First Edition Earth-Moving Machinery - Operator Enclosure Environment - Part 4: Operator Enclosure Ventilation, Heating and/or Air-Conditioning Test Method First Edition Earth-Moving Machinery - Operator Enclosure Environment - Part 5: Windscreen Defrosting System Test Method First Edition Earth-Moving Machinery - Operator Enclosure Environment - Part 6: Determination of Effect of Solar Heating on Operator Enclosure First Edition Earth-Moving Machinery - Key-Locked Starting Systems First Edition

ISO

10265

Earth-Moving Machinery - Crawler Machines - Performance Requirements and Test Procedures for Braking Systems First Edition

ISO ISO

10266 10268

ISO ISO

10270 10271

ISO

10272-1

ISO ISO ISO

10273 10275 10277

Earth-Moving Machinery - Determination of Slope Limits for Machine Fluid Systems Operation - Static Test Method First Edition Earth-Moving Machinery - Retarders for Dumpers and Tractor-Scrapers - Performance Tests First Edition Corrosion of Metals and Alloys - Aqueous Corrosion Testing of Zirconium Alloys for Use in Nuclear Power Reactors First Edition; Corrigendum 1 07-15-1997 Dental Metallic Materials - Corrosion Test Methods First Edition; Corrigendum 1: 1/15/2005 Microbiology of food and animal feeding stuffs Horizontal method for detection and enumeration of Campylobacter spp. Part 1: Detection method First Edition; Together with ISO TS 10272-2:2006 replaces ISO 10272:1995 Microbiology of food and animal feeding stuffs Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica Second Edition Metallic materials ù Sheet and strip ù Determination of tensile strain hardening exponent Second Edition Aluminium Ores Experimental Methods for Checking the Precision of Sampling First Edition

ISO ISO

10278 10279

ISO ISO ISO ISO ISO ISO ISO

10280 10282 CORR 1 10282 10283 10284 10285 10286

ISO ISO

10289 10290

ISO ISO

10291 10292

ISO ISO

10293 10294-1

Steel - Determination of Manganese Content - Inductively Coupled Plasma Atomic Emission Spectrometric Method First Edition Information Technology - Programming Languages - Full BASIC First Edition; (Amendment 1-1994) Steel and Iron - Determination of Titanium Content - Diantipyrylmethane Spectrophotometric Method First Edition (CEN EN ISO 10280: 1995) Single-use sterile rubber surgical gloves ù Specification TECHNICAL CORRIGENDUM 1 Second Edition Single-Use Sterile Surgical Rubber Gloves - Specification Second Edition Binders for paints and varnishes ù Determination of monomeric diisocyanates in isocyanate resins Second Edition Cinematography - Graphical Symbols - Description First Edition Rolling Bearings, Linear Motion, Recirculating Ball, Sleeve Type - Metric Series First Edition Gas Cylinders - Terminology Bouteilles A Gaz - Terminologie Third Edition Methods for Corrosion Testing of Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test Specimens and Manufactured Articles Subjected to Corrosion Tests First Edition; Cancels and Replaces ISO 1462: 1973, ISO 4540: 1980 and ISO 8403: 1991 Textiles - Cotton Yarns - Specifications First Edition Glass in Building - Determination of Steady-State U Values (Thermal Transmittance) of Multiple Glazing - Guarded Hot Plate Method First Edition Glass in Building - Calculation of Steady-State U Values (Thermal Transmittance) of Multiple Glazing First Edition Glass in Building - Determination of Steady-State U Values (Thermal Transmittance) of Multiple Glazing - Heat Flow Meter Method First Edition Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 1: Test Method First Edition

ISO ISO

10294-2 10294-3

Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 2: Classification, Criteria and Field of Application of Test Results First Edition Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 3: Guidance on the Test Method First Edition

ISO ISO

10294-4 10294-5

Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 4: Test of Thermal Release Mechanism First Edition Fire resistance tests - Fire dampers for air distribution systems - Part 5: Intumescent fire dampers First edition

ISO ISO ISO ISO ISO ISO ISO

10295-1 10296 10297 10298 10299 10300-1 10300-2

Fire tests for building elements and components ù Fire testing of service installations ù Part 1: Penetration seals First Edition Aircraft - Hybrid Remote Power Controllers - General Requirements First Edition Transportable gas cylinders - Cylinder valves - Specification and type testing Second Edition Determination of Toxicity of a Gas or Gas Mixture First Edition Aerospace - Rivets, Solid - Material and Metric Series Identification First Edition Calculation of Load Capacity of Bevel Gears - Part 1: Introduction and General Influence Factors First Edition Calculation of Load Capacity of Bevel Gears - Part 2: Calculation of Surface Durability Corrected Version; 5/15/2003

ISO ISO ISO

10300-3 10301 10302

ISO

10303-1

ISO

10303-11

ISO

10303-14

ISO

10303-21

ISO

10303-22

ISO

10303-23

ISO

10303-24

ISO

10303-31

ISO

10303-32

Calculation of Load Capacity of Bevel Gears - Part 3: Calculation of Tooth Root Strength First Edition; Corrected Version 6/15/2003 Water Quality - Determination of Highly Volatile Halogenated Hyrdrocarbons - Gas-Chromatographic Methods First Edition Acoustics - Method for the Measurement of Airborne Noise Emitted by Small Air-Moving Devices First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1: Overview and Fundamental Principles First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 11: Description Methods: the EXPRESS Language Reference Manual Second Edition Industrial automation systems and integration Product data representation and exchange Part 14: Description methods: The EXPRESS-X language reference manual First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 21: Implementation Methods: Clear Text Encoding of the Exchange Structure Second Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 22: Implementation Methods: Standard Data Access Interface First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 23: Implementation Methods: C++ Language Binding to the Standard Data Access Interface First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 24: Implementation Methods: C Language Binding of Standard Data Access Interface First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 31: Conformance Testing Methodology and Framework: General Concepts First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 32: Conformance Testing Methodology and Framework: Requirements on Testing Laboratories and Clients First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

ISO ISO ISO ISO ISO ISO ISO

Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 34: Conformance Testing Methodology and Framework: Abstract Test Methods for Application Protocol Implementations First Edition Industrial automation systems and integration Product data representation and exchange Part 41: Integrated generic resource: 10303-41 Fundamentals of product description and support Third Edition Industrial automation systems and integration - Product data representation and exchange - Part 42: Integrated generic resource: 10303-42 CORR 1 Geometric and topological representation, TECHNICAL CORRIGENDUM 1 Third Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 42: Integrated Generic Resource: 10303-42 Geometric and Topological Representation Third Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 43: Integrated Generic 10303-43 Resources: Representation Structures Technical Corrigendum 2 04/01/2000 Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 43: Integrated Generic Resource: 10303-43 Representation Structures Second Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 44: Integrated Generic 10303-44 Resources: Product Structure Configuration First Edition; Technical Corrigendum 1: 03-15-1999 Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 44: Integrated Generic Resource: 10303-44 Product Structure Configuration Second Edition; Technical Corrigendum 1: 03-15-2001 Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 45: Integrated Generic Resource: 10303-45 Materials First Edition; Technical Corrigendum 1: 03-15-1999 Industrial automation systems and integration - Product data representation and exchange - Part 45: Integrated generic resource: DIS 10303-45 Material and other engineering properties 10303-34

Industrial automation systems and integration Product data representation and exchange Part 46: Integrated generic resources: Visual presentation First Edition; Corrigendum 1: 07/15/1999; Corrigendum 2: 5/15/2002; Corrigendum 3: 08/01/2006 Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 47: Integrated Generic Resource: 10303-47 Shape Variation Tolerances First Edition; Technical Corrigendum 1: 10/15/2000 Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 49: Integrated Generic 10303-49 Resources: Process Structure and Properties First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 50: Integrated Generic 10303-50 Resources: Mathematical Constructs First Edition Industrial automation systems and integration ù Product data representation and exchange ù Part 55: Integrated generic resource: 10303-55 CORR 1 Procedural and hybrid representation TECHNICAL CORRIGENDUM 1 First Edition Industrial automation systems ù Product data representation and exchange ù Part 55: Integrated generic resource: Procedural and 10303-55 hybrid representation First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 101: Intergrated Application 10303-101 Resources: Draughting First Edition; Corrigendum 1: 04/15/1999 10303-46

ISO

10303-104

ISO

10303-105

ISO

10303-108

ISO

10303-109

ISO

10303-111

ISO

10303-112

ISO

10303-201

ISO

10303-202

ISO

10303-203

ISO

10303-204

ISO

10303-207

ISO

10303-209

ISO

10303-210

ISO

10303-212

ISO

10303-214

ISO

10303-215

ISO

10303-216

Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 104: Integrated Application Resource: Finite Element Analysis First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 105: Integrated Application Resource: Kinematics First Edition; Technical Corrigendum 1:03/01/2000; Technical Corrigendum 2: 10/15/2000 Industrial automation systems and integration Product data representation and exchange Part 108: Integrated application resource: Parameterization and constraints for explicit geometric product models First Edition Industrial automation systems and integration Product data representation and exchange Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models First Edition Industrial automation systems and integration ù Product data representation and exchange ù Part 111: Integrated application resource: Elements for the procedural modelling of solid shapes First Edition Industrial automation systems and integration Product data representation and exchange Part 112: Integrated application resource: Modelling commands for the exchange of procedurally represented 2D CAD models First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 201: Application Protocol: Explicit Draughting First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 202: Application Protocol: Associative Draughting First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 203: Application Protocol: Configuration Controlled Design First Edition; Technical Corrigendum 1: 03/15/1995; Technical Corrigendum 2: 12/15/1998; Amendment 1: 11/01/2000; Technical Corrigendum 3: 02/15/2004 Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 204: Application Protocol: Mechanical Design Using Boundary Representation First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 207: Application Protocol: Sheet Metal Die Planning and Design First Edition; Technical Corrigendum 1: 03-01-2001 Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 209: Application Protocol: Composite and Metallic Structural Analysis and Related Design First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 210: Application Protocol: Electronic Assembly, Interconnection, and Packaging Design First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 212: Application Protocol: Electrotechnical Design and Installation First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 214: Application Protocol: Core Data for Automotive Mechanical Design Processes Second Edition Industrial automation systems and integration Product data representation and exchange Part 215: Application protocol: Ship arrangement First Edition Industrial automation systems and integration Product data representation and exchange Part 216: Application protocol: Ship moulded forms First Edition

ISO

10303-218

ISO

10303-224

ISO

10303-225

ISO

10303-227

ISO

10303-232

ISO

10303-238

ISO

10303-240

ISO

10303-501

ISO

10303-502

ISO

10303-503

ISO

10303-504

ISO

10303-505

ISO

10303-506

ISO

10303-507

ISO

10303-508

ISO

10303-509

ISO

10303-510

ISO

10303-511

Industrial automation systems and integration Product data representation and exchange Part 218: Application protocol: Ship structures First Edition Industrial automation systems and integration Product data representation and exchange Part 224: Application protocol: Mechanical product definition for process planning using machining feature Third Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 225: Application Protocol: Building Elements Using Explicit Shape Representation First Edition Industrial automation systems and integration - Product data representation and exchange - Part 227: Application protocol: Plant spatial configuration Second Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 232: Application Protocol: Tehcnical Data Packaging Core Information and Exchange First Edition Industrial automation systems and integration ù Product data representation and exchange ù Part 238: Application protocol: Application interpreted model for computerized numerical controllers First Edition Industrial automation systems and integration Product data representation and exchange Part 240: Application protocol: Process plans for machined products First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 501: Application Interpreted Construct: Edge-Based Wireframe First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 502: Application Interpreted Construct: Shell-Based Wireframe First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 503: Application Interpreted Construct: Geometrically Bounded 2D Wireframe First Edition; Technical Corrigendum 1: 12/1/2006 Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 504: Application Interpreted Construct: Draughting Annotation First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 505: Application Interpreted Construct: Drawing Structure and Administration First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 506: Application Interpreted Construct: Draughting Elements First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 507: Application Interpreted Construct: Geometrically Bounded Surface First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 508: Application Interpreted Construct: Non-Manifold Surface First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 509: Application Interpreted Construct: Manifold Surface First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 510: Application Interpreted Construct: Geometrically Bounded Wireframe First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 511: Application Interpreted Construct: Topologically Bounded Surface First Edition

ISO

10303-512

ISO

10303-513

ISO

10303-514

ISO

10303-515

ISO

10303-517

ISO

10303-518

ISO

10303-519

ISO

10303-520

ISO

10303-521

ISO

10303-522

ISO

10303-523

ISO

10304-1

ISO

10304-3

ISO ISO

10304-4 10306

ISO

10307-1

ISO ISO ISO ISO

10307-2 10308 10309 10310

Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 512: Application Interpreted Construct: Faceted Boundary Representation First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 513: Application Interpreted Construct: Elementry Boundary Representation First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 514: Application Interpreted Construct: Advanced Boundary Representation First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 515: Application Interpreted Construct: Constructive Solid Geometry First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 517: Application Interpreted Construct: Mechanical Design Geometric Presentation First Edition; Corrigendum 1: 02/01/2002 Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 518: Application Interpreted Construct: Mechanical Design Shaded Presentation First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 519: Application Interpreted Construct: Geometric Tolerances First Edition; Technical Corrigendum 1: 10/15/2000 Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 520: Application Interpreted Construct: Associative Draughting Elements First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 521: Application Interpreted Construct: Manifold Subsurface First Edition Industrial automation systems and integration Product data representation and exchange Part 522: Application interpreted construct: Machining features Second Edition Industrial automation systems and integration Product data representation and exchange Part 523: Application interpreted construct: Curve swept solid First Edition Water quality ù Determination of dissolved anions by liquid chromatography of ions ù Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate Second Edition [Cancelled: ISO 10304-2] Water Quality - Determination of Dissolved Anions by Liquid Chromatography of Ions - Part 3: Determination of Chromate, Iodide, Sulfite, Thiocyanate and Thiosulfate First Edition Water Quality - Determination of Dissolved Anions by Liquid Chromatography of Ions - Part 4: Determination of Chlorate, Chloride and Chlorite in Water with Low Contamination First Edition Textiles - Cotton Fibres - Evaluation of Maturity by the Air Flow Method First Edition Petroleum Products - Total Sediment in Residual Fuel Oils - Part 1: Determination by Hot Filtration First Edition; Corrigendum 1-1997 Petroleum Products - Total Sediment in Residual Fuel Oils - Part 2: Determination Using Standard Procedures for Ageing First Edition Metallic coatings Review of porosity tests Second Edition Metallic Coatings - Porosity Tests - Ferroxyl Test First Edition Neurosurgical Implants - Marking and Packaging of Implantable Neural Stimulators First Edition

ISO ISO

10312 10313

Ambient Air - Determination of Asbestos Fibres - Direct-Transfer Transmission Electron Microscopy Method First Edition Ambient Air - Determination of the Mass Concentration of Ozone - Chemiluminescence Method First Edition Cigarettes - Determination of Nicotine in Smoke Condensates - Gas- Chromatographic Method Second Edition; Technical Corrigendum 1: 11-15-2000 Shipbuilding - Class B Magnetic Compasses - Tests and Certification First Edition Rolling Bearings - Metric Tapered Roller Bearings - Designation System First Edition Geosynthetics Terms and definitions Second Edition Geotextiles - Wide-Width Tensile Test First Edition (CEN EN ISO 10319: 1996) Geotextiles and Geotextile-Related Products - Identification on Site Second Edition Geotextiles - Tensile Test for Joints/Seams by Wide-Width Method First Edition (CEN EN ISO 10321: 1996) Ophthalmic Optics - Semi-Finished Spectacle Lens Blanks - Part 1: Specifications for Single-Vision and Multifocal Lens Blanks Third Edition

ISO ISO ISO ISO ISO ISO ISO

10315 10316 10317 10318 10319 10320 10321

ISO

10322-1

ISO ISO ISO ISO

10322-2 10323 10324 10326-1 AMD 1

ISO

10326-1

ISO ISO

10326-2 10327

ISO ISO

10328 10328-5

ISO

10328-6

ISO

10330

ISO ISO ISO ISO

10332 10333-1 10333-2 10333-3

Mechanical Vibration - Laboratory Method for Evaluating Vehicle Seat Vibration - Part 2: Application to Railway Vehicles First Edition Aircraft - Certified Aircraft Container for Air Cargo - Specification and Testing First Edition Prosthetics Structural testing of lowerlimb prostheses Requirements and test methods First Edition; Replaces ISO 10328-1:1996 to ISO 10328-8:1996 Prosthetics - Structural Testing of Lower-Limb Prostheses - Part 5: Supplementary Structural Tests First Edition;:2006 Prosthetics - Structural Testing of Lower-Limb Prostheses - Part 6: Loading Parameters of Supplementary Structural Tests First Edition;:2006 Photography - Synchronizers, Ignition Circuits and Connectors for Cameras and Photoflash Units - Electrical Characteristics and Test Methods Second Edition Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for Pressure Purposes - Ultrasonic Testing for Verification of Hydraulic Leak-Tightness First Edition Personal Fall-Arrest Systems - Part 1: Full-Body Harnesses First Edition; Amendment 1: 03/15/2002 Personal Fall-Arrest Systems - Part 2: Lanyards and Energy Absorbers First Edition Personal Fall-Arrest Systems - Part 3: Self-Retracting Lifelines First Edition

ISO

10333-4

Personal Fall-Arrest Systems - Part 4: Vertical Rails and Vertical Lifelines Incorporting a Sliding-Type Fall Arrester First Edition

Ophthalmic Optics - Semi-Finished Spectacle Lens Blanks - Part 2: Specifications for Progressive Power Lens Blanks Third Edition Dental Rotary Instruments - Bore Diameters for Discs and Wheels First Edition; (CEN EN ISO 10 323: 1995) Information and Documentation - Holdings Statements - Summary Level First Edition Mechanical vibration ù Laboratory method for evaluating vehicle seat vibration ù Part 1: Basic requirements First Edition Mechanical Vibration - Laboratory Method for Evaluating Vehicle Seat Vibration - Part 1: Basic Requirements First Edition (CEN EN 30326-1:1994)

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

10333-5 10333-6 10334 10336 10337 10341 10342 10343 10345-1 10345-2 10348 10349-1

Personal Fall-Arrest Systems - Part 5:Connectors with Self-Closing and Self-Locking Gates First Edition Personal fall-arrest systems Part 6: System performance tests First Edition Implants for Surgery - Malleable Wires for Use as Sutures and Other Surgical Applications First Edition Crude Petroleum - Determination of Water - Potentiometric Karl Fischer Titration Method First Edition Crude Petroleum - Determination of Water - Coulometric Karl Fischer Titration Method First Edition Ophthalmic Instruments - Refractor Heads First Edition Ophthalmic Instruments - Eye Refractometers Second Edition Ophthalmic Instruments - Ophthalmometers First Edition Glass - Determination of Stress-Optical Coefficient - Part 1: Tensile Test First Edition Glass - Determination of Stress-Optical Coefficient - Part 2: Bending Test First Edition Photography - Processing Wastes - Determination of Silver Content First Edition Photography - Photographic-Grade Chemicals - Test Methods - Part 1: General First Edition Second edition

ISO

10349-2

ISO ISO

10349-3 10349-4

Photography - Photographic-Grade Chemicals - Test Methods - Part 2: Determination of Matter Insoluble in Water First Edition Photography - Photographic-Grade Chemicals - Test Methods - Part 3: Determination of Matter Insoluble in Ammonium Hydroxide Solution First Edition Photography - Photographic-Grade Chemicals - Test Methods - Part 4: Determination of Residue After Ignition First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

10349-5 10349-6 10349-7 10349-8 10349-9 10349-10 10349-11 10349-12 10349-13 10350-1

Photography - Photographic-Grade Chemicals - Test Methods - Part 5: Determination of Heavy Metals and Iron Content First Edition Photography - Photographic-Grade Chemicals - Test Methods - Part 6: Determination of Halide Content First Edition Photography - Photographic-Grade Chemicals - Test Methods - Part 7: Determination of Alkalinity or Acidity First Edition Photography - Photographic-Grade Chemicals - Test Methods - Part 8: Determination of Volatile Matter Second edition Photography - Photographic-Grade Chemicals - Test Methods - Part 9: Reaction to Ammoniacal Silver Nitrate First Edition Photography - Photographic-Grade Chemicals - Test Methods - Part 10: Determination of Sulfide Content First Edition Photography - Photographic-Grade Chemicals - Test Methods - Part 11: Determination of Specific Gravity First Edition Photography - Photographic-Grade Chemicals - Test Methods - Part 12: Determination of Density First Edition Photography - Photographic-Grade Chemicals - Test Methods - Part 13: Determination of pH First Edition Plastics ù Acquisition and presentation of comparable single-point data ù Part 1: Moulding materials Second Edition

ISO ISO ISO ISO ISO

10350-2 10352 10354 10355 10356

Plastics - Aquisition and Presentation of Comparable Single-Point Data - Part 2: Long-Fibre-Reinforced Plastics First Edition Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Mass per Unit Area Second Edition Adhesives - Characterization of Durability of Structural -Adhesive-Bonded Assemblies - Wedge Rupture Test First Edition Mopeds - Positioning of Lighting and Light-Signalling Devices Second Edition Cinematography - Storage and Handling of Nitrate- Base Motion-Picture Films First Edition

ISO

10359-1

Water Quality - Determination of Fluoride - Part 1: Electrochemical Probe Method for Potable and Lightly Polluted Water First Edition

ISO

10359-2

Water Quality - Determination of Fluoride - Part 2: Determination of Inorganically Bound Total Fluoride After Digestion and Distillation First Edition

ISO

10360-1

ISO

10360-2

ISO

10360-3

ISO

10360-4

ISO

10360-5

ISO

10360-6 CORR 1

ISO

10360-6

ISO ISO ISO ISO ISO ISO

10361 10362-1 10362-2 10363 10364 10365

ISO

10366-1

ISO

10366-2

Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 1: Vocabulary Specification Geometrique Des Produits (GPS) - Essais De Reception Et De Verification Periodique Des Machines A Mesurer Tridimensionnelles (MMT) - Partie 1: Vocabulaire First Edition; Corrigendum 1: 11/15/2002 Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 2: CMMs Used for Measuring Size Second Edition Geometrical Product Specifications (GPS) - Acceptance and Reverification Test for Coordinate Measuring Machines (CMM) - Part 3: CMMs with the Axis of a Rotary Table as the Fourth Axis First Edition Geometrical Product Specifications (GPS) - Acceptance and Reverification Test for Coordinate Measuring Machines (CMM) - Part 4: CMMs Used in Scanning Measuring Mode First Edition; Corrigendum 1: 11/15/2002 Geometrical Product Specifications (GPS) Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) Part 5: CMMs Using Multiple-Stylus Probing Systems First Edition Geometrical Product Specifications (GPS) ù Acceptance and reverification tests for coordinate measuring machines (CMM) ù Part 6: Estimation of errors in computing Gaussian associated features Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 6: Estimation of Errors in Computing Gaussian Associated Features First Edition Textile Floor Coverings - Production of Changes in Appearance by Means of Vettermann Drum and Hexapod Tumbler Testers First Edition Cigarettes - Determination of Water in Smoke Condensates - Part 1: Gas-Chromatographic Method Second Edition Cigarettes - Determination of Water in Smoke Condensates - Part 2: Karl Fischer Method First Edition Hot-Melt Adhesives - Determination of Thermal Stability First Edition (CEN EN ISO 10363: 1995) Structural adhesives ù Determination of the pot life (working life) of multi-component adhesives Second Edition Adhesives - Designation of Main Failure Patterns First Edition (CEN EN ISO 10365: 1995) Plastics - Methyl Methacrylate-Acrylonitrile-Butadiene-Styrene (MABS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Second Edition Plastics Methyl methacrylateacrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties Second Edition

ISO ISO ISO ISO ISO ISO

10367 10368 10370 10371 10372 10373-1

Information Technology - Standardized Coded Graphic Character Sets for Use in 8-Bit Codes Technical Corrigendum 1:06/01/2001 Freight thermal containers Remote condition monitoring Second Edition Petroleum Products - Determination of Carbon Residue - Micro Method First Edition (CEN EN ISO 10370: 1996) Reinforcement Materials - Braided Tapes - Basis for a Specification First Edition Hydraulic Fluid Power - Four- and Five-Port Servovalves - Mounting Surfaces First Edition Identification Cards - Test Methods - Part 1: General Characteristics Second Edition

ISO

10373-2

Identification cards Test methods Part 2: Cards with magnetic stripes Second Edition

ISO ISO

10373-3 10373-5

Identification Cards - Test Methods - Part 3: Integrated Circuit(s) Cards with Contacts and Related Interface Devices First Edition Identification cards - Test methods - Part 5: Optical memory cards Second Edition

ISO

10373-6 AMD 1

ISO

10373-6 AMD 3

ISO ISO ISO ISO ISO ISO ISO

10373-6 AMD 4 10373-6 AMD 2 10373-6 10373-6 FDAM 5 10373-7 10374 10375

ISO ISO ISO ISO ISO

10378 10380 10381-1 10381-2 10381-3

ISO

10381-4

ISO

10381-5

ISO ISO ISO

10381-6 10381-7 10381-8

ISO ISO ISO ISO ISO

10382 10383 10384 10386 10387

Identification cards ù Test methods ù Part 6: Proximity cards AMENDMENT 1: Protocol test methods for proximity cards First Edition Identification cards ù Test methods ù Part 6: Proximity cards AMENDMENT 3: Protocol test methods for proximity coupling devices First Edition Identification cards ù Test methods ù Part 6: Proximity cards AMENDMENT 4: Additional test methods for PCD RF interface and PICC alternating field exposure First Edition Identification cards ù Test methods ù Part 6: Proximity cards AMENDMENT 2: Improved RF test methods First Edition Identification Cards - Test Methods - Part 6: Proximity Cards First Edition Identification Cards - Test Methods - Part 6: Proximity Cards AMENDMENT 5: Bit rates of fc/64, fc/32 and fc/16 Identification Cards - Test Methods - Part 7: Vicinity Cards First Edition Freight Containers - Automatic Identification First Edition; Amendment 1: 1995 Non-Destructive Testing - Ultrasonic Inspection - Characterization of Search Unit and Sound Field First Edition Copper, lead and zinc sulfide concentrates Determination of gold and silver Fire assay gravimetric and flame atomic absorption spectrometric method Second Edition Pipework - Corrugated Flexible Metallic Hose and Hose Assemblies Second Edition Soil quality - Sampling - Part 1: Guidance in the design of sampling programs First edition Soil Quality - Sampling - Part 2: Guidance on Sampling Techniques First Edition Soil Quality - Sampling - Part 3: Guidance on Safety First Edition Soil quality Sampling Part 4: Guidance on the procedure for investigation of natural, near-natural and cultivated sites First Edition Soil quality Sampling Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination First Edition Soil Quality - Sampling - Part 6: Guidance on the Collection, Handling and Storage of Soil for the Assessment of Aerobic Microbial Processess in the Laboratory First Edition Soil quality Sampling Part 7: Guidance on sampling of soil gas First Edition Soil quality Sampling Part 8: Guidance on sampling of stockpiles First Edition Soil Quality - Determination of Organochlorine Pesticides and Polychlorinated Biphenyls - Gas-Chromatographic Method with Electron Capture Detection First Edition Securities and related financial instruments Codes for exchanges and market identification (MIC) second Edition Hot-Rolled Carbon Steel Sheet as Defined by Chemical Composition Second Edition Ferroboron - Specification and Conditions of Delivery First Edition Metal Chrome - Specification and Conditions of Delivery First Edition

ISO ISO

10390 10392

ISO

10396

Soil quality - Determination of pH Second Edition Road Vehicles with Two Axles - Determination of Centre of Gravity First Edition Stationary source emissions ù Sampling for the automated determination of gas emission concentrations for permanentlyinstalled monitoring systems Second Edition

ISO ISO ISO

10397 10398 10399

Stationary Source Emissions - Determination of Asbestos Plant Emissions - Method by Fibre Count Measurement First Edition Rubber - Identification of Accelerators in Cured and Uncured Compounds First Edition Sensory analysis Methodology Duo-trio test Second Edition

ISO ISO

10400 10405

Petroleum and Natural Gas Industries - Formulae and Calculation for Casing, Tubing, Drill Pipe and Line Pipe Properties First Edition Petroleum and Natural Gas Industries - Care and Use of Casing and Tubing Second Edition

ISO ISO ISO ISO

10407 10414-1 10414-2 10416

ISO

10417

Petroleum and Natural Gas Industries - Drilling and Production Equipment - Drill Stem Design and Operating Limits First Edition Petroleum and Natural Gas Industries - Field Testing of Drilling Fluids - Part 1: Water-Based Fluids First Edition Petroleum and Natural Gas Industries - Field Testing of Drilling Fluids - Part 2: Oil-Based Fluids First Edition Petroleum and natural gas industries Drilling fluids Laboratory testing First Edition Petroleum and Natural Gas Industries - Subsurface Safety Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress Second Edition

ISO

10418

Petroleum and natural gas industries Offshore production installations Basic surface process safety systems Second Edition

ISO ISO ISO ISO

10423 10424-1 10425 10426-1

ISO

10426-2 CORR 1

ISO

10426-2 AMD 1

ISO

10426-2

ISO

10426-3

ISO

10426-4

Petroleum and Natural Gas Industries - Drilling and Production Equipment - Wellhead and Christmas Tree Equipment Third Edition Petroleum and natural gas industries Rotary drilling equipment Part 1: Rotary drill stem elements First Edition Steel wire ropes for the petroleum and natural gas industries Minimum requirements and terms of acceptance First Edition Petroleum and natural gas industries Cements and materials for well cementing Part 1: Specification Second Edition Petroleum and natural gas industries ù Cements and materials for well cementing ù Part 2: Testing of well cements TECHNICAL CORRIGENDUM 1 Petroleum and natural gas industries Cements and materials for well cementing Part 2: Testing of well cements AMENDMENT 1: Water-wetting capability testing First Edition Petroleum and natural gas industries Cements and materials for well cementing Part 2: Testing of well cements First Edition Petroleum and natural gas industries Cements and materials for well cementing Part 3: Testing of deepwater well cement formulations First Edition Petroleum and natural gas industries Cements and materials for well cementing Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure First Edition

ISO

10426-5

ISO

10427-1

ISO

10427-2

ISO

10427-3

ISO ISO ISO ISO ISO

10428 10431 10432 10434 10437

ISO

10438-1

ISO

FDIS 10438-1

ISO

10438-3

ISO

FDIS 10438-3

ISO

10438-4

ISO ISO

FDIS 10438-4 10439

ISO

10440-2

ISO ISO ISO ISO ISO

10441 10442 10444 10447 10448

Petroleum and natural gas industries Cements and materials for well cementing Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure First Edition Petroleum and Natural Gas Industries - Equipment for Well Cementing - Part 1: Casing Bow-Spring Centralizers First Edition /Cobranded with API Spec 10D; Corrected Version 10-01-2003; Together with ISO 10427-2 and ISO 10427-3 Replaces ISO 10427:1993 Petroleum and natural gas industries Equipment for well cementing Part 2: Centralizer placement and stop-collar testing First Edition; Together with ISO 10427-1 and ISO 10427-3 Replaces ISO 10427:1993 Petroleum and Natural Gas Industries - Equipment for Well Cementing - Part 3: Performance Testing of Cementing Float Equipment First Edition; Together with ISO 10427-1 and ISO 10427-2 Replaces ISO 10427:1993 Petroleum and Natural Gas Industries - Sucker Rods (Pony Rods, Polished Rods, Couplings and Sub-Couplings) - Specification First Edition Petroleum and Natural Gas Industries - Pumping Units - Specification First Edition Petroleum and Natural Gas Industries - Downhole Equipment - Subsurface Safety Valve Equipment Third Edition Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Second Edition Petroleum, petrochemical and natural gas industries Steam turbines Special-purpose applications Second Edition Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 1: General requirements Petroleum, petrochemical and natural gas industries ù Lubrication, shaft-sealing and control-oil systems and auxiliaries ù Part 1: General requirements Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems First Edition Petroleum, petrochemical and natural gas industries ù Lubrication, shaft-sealing and control-oil systems and auxiliaries ù Part 3: General-purpose oil systems Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Selfacting gas seal support systems First Edition Petroleum, petrochemical and natural gas industries ù Lubrication, shaft-sealing and control-oil systems and auxiliaries ù Part 4: Selfacting gas seal support systems Petroleum, Chemical and Gas Service Industries - Centrifugal Compressors First Edition; Corrected Version 06/15/2003 Petroleum and Natural Gas Industries - Rotary-Type Positive-Displacement Compressors - Part 2: Packaged Air Compressors (Oil Free) First Edition Petroleum, petrochemical and natural gas industries ù Flexible couplings for mechanical power transmission ù Special-purpose applications Second Edition Petroleum, Chemical and Gas Service Industries Packaged, Integrally Geared Centrifugal Air Compressors First Edition Information and Documentation - International Standard Technical Report Number (ISRN) First Edition Resistance welding Peel and chisel testing of resistance spot and projection welds Second Edition Agricultural Tractors - Hydraulic Pressure for Implements First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

10451 10454 10455 10456 10457 10458 10459 10460 10461 AMD 1 10461 10462

Dental Implant Systems - Contents of Technical File First Edition Truck and Bus Tyres - Verifying Tyre Capabilities - Laboratory Test Methods First Edition Road Vehicles - Dry Ignition Coils Using Rotating High-Voltage Distributor First Edition Building Materials and Products - Procedures for Determining Declared and Design Thermal Values Second Edition Textile machinery Dyeing and finishing machines Nominal speeds Second Edition Textile Machinery - Square Bars for Winding Devices Relating to Dyeing and Finishing Machines - Dimensions First Edition Textile Machinery - Dyeing and Finishing Machines - Designation of Operating Ranges of Component Parts First Edition Gas cylinders Welded carbon-steel gas cylinders Periodic inspection and testing Second Edition Gas cylinders ù Seamless aluminiumalloy gas cylinders ù Periodic inspection and testing AMENDMENT 1 Second Edition Gas cylinders ù Seamless aluminium-alloy gas cylinders ù Periodic inspection and testing Second Edition Gas cylinders Transportable cylinders for dissolved acetylene Periodic inspection and maintenance Second Edition

ISO

10464

ISO

10466

ISO

10467

ISO ISO ISO

10468 10469 10470

ISO ISO ISO

10471 10472-1 10472-2

Gas cylinders Refillable welded steel cylinders for liquefied petroleum gas (LPG) Periodic inspection and testing First Edition Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Test Method to Prove the Resistance to Initial Ring Deflection First Edition Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin First Edition Glass-reinforced thermosetting plastics (GRP) pipes Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor First Edition Copper sulfide concentrates - Determination of copper - Electrogravimetric method Second Edition Green Coffee - Defect Reference Chart Second Edition Glass-reinforced thermosetting plastics (GRP) pipes Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions First Edition Safety Requirements for Industrial Laundry Machinery - Part 1: Common Requirements First Edition Safety Requirements for Industrial Laundry Machinery - Part 2: Washing Machines and Washer-Extractors First Edition

ISO ISO ISO ISO

10472-3 10472-4 10472-5 10472-6

Safety Requirements for Industrial Laundry Machinery - Part 3: Washing Tunnel Lines Including Component Machines First Edition Safety Requirements for Industrial Laundry Machinery - Part 4: Air Dryers First Edition Safety Requirements for Industrial Laundry Machinery - Part 5: Flatwork Ironers, Feeders and Folders First Edition Safety Requirements for Industrial Laundry Machinery - Part 6:Ironing and Fusing Presses First Edition

ISO ISO ISO ISO

10473 10474 10475 10477

Ambient Air - Measurement of the Mass of Particulate Matter on a Filter Medium - Beta-Ray Absorption Method First Edition Steel and Steel Products - Inspection Documents First Edition; (Corrected and Reprinted - 1992) Valves for Tubeless Tyres and Valves for Tubes - Identification System for Valves and Their Components First Edition Dentistry - Polymer-Based Crown and Bridge Materials Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

10478 10483-1 10483-2 10484 10485 10486 10487-1 10487-2 10494 10497 10498

ISO ISO

10499 10499-2

ISO

10500

ISO

10502

ISO ISO ISO ISO ISO

10504 10508 10509 10510 10511

ISO

10512

ISO ISO ISO ISO ISO

10513 10514-1 10514-2 10514-3 10517

ISO ISO

10518 10519

Petroleum Products - Determination of Aluminium and Silicon in Fuel Oils - Inductively Coupled Plasma Emission and Atomic Absorption Spectroscopy Methods First Edition Road vehicles Intelligent power switches Part 1: High-side intelligent power switch Second Edition Road Vehicles - Intelligent Power Switches - Part 2: Low-Side Intelligent Power Switch First Edition Widening Test on Nuts First Edition Cone Proof Load Test on Nuts First Edition Passenger Cars - Car Radio Identification Number (CRIN) First Edition Passenger Car Radio Connections - Part 1: Dimensions and General Requirements First Edition Passenger Cars - Connections for Car Radios - Part 2: Performance Requirements First Edition Gas Turbines and Gas Turbine Sets - Measurement of Emitted Airborne Noise - Engineering/Survey Method First Edition Testing of Valves - Fire Type-Testing Requirements Second Edition Ambient air Determination of sulfur dioxide Ultraviolet fluorescence method First Edition Industrial Tyres and Rims - Solid Tyres (Metric Series) for Pneumatic Tyre Rims - Designation, Dimensions and Marking First Edition; Corrigendum 1-1997 Industrial Tyres and Rims - Rubber Solid Tyres (Metric Series) for Pneumatic Tyre Rims - Part 2: Load Ratings First Edition Industrial Tyres and Rims - Cylindrical and Conical Base Rubber Solid Tyres (Metric Series) - Designation, Dimensions and Marking First Edition Aerospace - Hose Assemblies in Polytetrafluoroethylene (PTFE) for Use up to 232 Degrees C and 10 500 kPa - Procurement Specification First Edition Starch Derivatives - Determination of the Composition of Glucose Syrups, Fructose Syrups and Hydrogenated Glucose Syrups Method Using High-Performance Liquid Chromatography First Edition Plastics piping systems for hot and cold water installations - Guidance for classification and design Second Edition Hexagon Flange Head Tapping Screws First Edition (AS/NZS 4410: 1996) Tapping Screw and Washer Assemblies with Plain Washers First Edition Prevailing Torque Type Hexagon Thin Nuts (with Non-Metallic Insert) First Edition Prevailing Torque Type Hexagon Nuts (with Non-Metallic Insert), Style 1, with Metric Fine Pitch Thread - Property Classes 6, 8 and 10 First Edition Prevailing Torque Type All-Metal Hexagon Nuts, Style 2, with Metric Fine Pitch Thread - Property Classes 8, 10 and 12 First Edition Information Technology - Programming Languages - Part 1: Modula-2, Base Language First Edition Information Technology - Programming Languages - Part 2: Generics in Modula-2 First Edition Information Technology - Programming Languages - Part 3: Object Oriented Modula-2 First Edition Portable Powered Hedge Trimmers - Definitions, Mechanical Safety Requirements and Tests First Edition Powered Walk-Behind and Hand-Held Lawn Trimmers and Lawn Edge Trimmers - Mechanical Safety Requirements and Test Methods First Edition; (Corrected and Reprinted - 1991) (Amendment 1-1994) Rapeseed - Determination of Chlorophyll Content - Spectrometric Method Second Edition

ISO

10520

Native Starch - Determination of Starch Content - Ewers Polarimetric Method First Edition Road vehicles Road load Part 1: Determination under reference atmospheric conditions First Edition; Together with ISO 105212:2006 replaces ISO 10521:1992 Road vehicles Road load Part 2: Reproduction on chassis dynamometer First Edition; Together with ISO 10521-1:2006 replaces ISO 10521:1992 Agricultural Irrigation Equipment - Direct-Acting Pressure-Regulating Valves First Edition Water Quality - Determination of pH First Edition Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices First Edition; Supersedes ISO 10524: 1995 Pressure regulators for use with medical gases Part 2: Manifold and line pressure regulators First edition Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves First edition

ISO

10521-1

ISO ISO ISO

10521-2 10522 10523

ISO ISO ISO

10524-1 10524-2 10524-3

ISO ISO

10525 10526

Counterbalanced Trucks Handling Freight Containers of 6 m (20 ft) Length and Above - Additional Stability Tests First Edition CIE Standard Illuminants for Colorimetry Second Edition; CIE S 005

ISO ISO ISO

10528 10530 10531

ISO ISO

10532 10533

ISO

10534-1

ISO ISO

10534-2 10535

Textiles - Commercial Laundering Procedure for Textile Fabrics Prior to Flammability Testing First Edition (CEN EN ISO 10528 : 1995 Water Quality - Determination of Dissolved Sulfide - Photometric Method Using Methylene Blue First Edition Packaging - Complete, Filled Transport Packages - Stability Testing of Unit Loads First Edition Earth-Moving Machinery - Machine-Mounted Retrieval Device - Performance Requirements First Edition First Edition; Amendment 1: 9/1/2004 Earth-Moving Machinery - Lift-Arm Support Devices First Edition; Amendment 1: 06/01/2005 Acoustics - Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes - Part 1: Method Using Standing Wave Ratio First Edition Acoustics - Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes - Part 2: Transfer-Function Method First Edition Hoists for the transfer of disabled persons Requirements and test methods Second Edition

ISO

10536-1

Identification Cards - Contactless Integrated Circuit(s) Cards - Close-Coupled Cards - Part 1: Physical Characteristics Second Edition

ISO ISO ISO ISO ISO

10536-2 10536-3 10538 10539 10540-1

ISO

10540-2

Identification Cards - Contactless Integrated Circuit(s) Cards - Part 2: Dimensions and Location of Coupling Areas First Edition Identification Cards - Contactless Integrated Circuit(s) Cards - Part 3: Electronic Signals and Reset Procedures First Edition Information Technology - Control Functions for Text Communication First Edition Animal and Vegetable Fats and Oils - Determination of Alkalinity First Edition Animal and Vegetable Fats and Oils - Determination of Phosphorus Content - Part 1: Colorimetric Method First Edition Animal and vegetable fats and oils Determination of phosphorus content Part 2: Method using graphite furnace atomic absorption spectrometry First Edition

ISO

10540-3

ISO

10542-1

ISO

10542-2

ISO

10542-3

ISO

10542-4

ISO

10542-5

ISO ISO ISO ISO

10543 10544 10545-1 10545-2

ISO ISO

10545-3 10545-4

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

10545-5 10545-6 10545-7 10545-8 10545-9 10545-10 10545-11 10545-12 10545-13 10545-14 10545-15 10545-16

ISO ISO

10546 10548

Animal and vegetable fats and oils Determination of phosphorus content Part 3: Method using inductively coupled plasma (ICP) optical emission spectroscopy First Edition Technical Systems and Aids for Disabled or Handicapped Persons - Wheelchair Tiedown and Occupant-Restraint Systems - Part 1: Requirements and Test Methods for All Systems First Edition Technical Systems and Aids for Disabled or Handicapped Persons - Wheelchair Tiedown and Occupant-Restraint Systems - Part 2: Four-Point Strap-Type Tiedown Systems First Edition Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 3: Docking-type tiedown systems First Edition Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 4: Clamptype tiedown systems First Edition Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 5: Systems for specific wheelchairs First Edition Seamless and Hot-Stretched-Reduced Welded Steel Tubes for Pressure Purposes - Full Peripheral Ultrasonic Thickness Testing First Edition Cold-Reduced Steel Wire for the Reinforcement of Concrete and the Manufacture of Welded Fabric First Edition Ceramic Tiles - Part 1: Sampling and Basis for Acceptance First Edition Ceramic Tiles - Part 2: Determination of Dimensions and Surface Quality First Edition; Corrigendum 1 02/15/1997 Ceramic Tiles - Part 3: Determination of Water Absorption, Apparent Porosity, Apparent Relative Density and Bulk Density First Edition; Corrigendum 1 02/15/1997 Ceramic Tiles - Part 4: Determination of Modulus of Rupture and Breaking Strength Second Edition Ceramic Tiles - Part 5: Determination of Impact Resistance by Measurement of Coefficient of Restitution First Edition; Corrigendum 1 02/15/1997 Ceramic Tiles - Part 6: Determination of Resistance to Deep Abrasion for Unglazed Tiles First Edition Ceramic Tiles - Part 7: Determination of Resistance to Surface Abrasion for Glazed Tiles First Edition Ceramic Tiles - Part 8: Determination of Linear Thermal Expansion First Edition CEN 10 545-8: 1996 Ceramic tiles Part 9: Determination of resistance to thermal shock Second Edition Ceramic Tiles - Part 10: Determination of Moisture Expansion First Edition Ceramic Tiles - Part 11: Determination of Crazing Resistance for Glazed Tiles First Edition CEN EN ISO 10 545-11: 1996 Ceramic Tiles - Part 12: Determination of Frost Resistance First Edition; Corrigendum 1 02/15/1997 Ceramic Tiles - Part 13: Determination of Chemical Resistance First Edition Ceramic Tiles - Part 14: Determination of Resistance to Stains First Edition; Corrigendum 1 02/15/1997 Ceramic Tiles - Part 15: Determination of Lead and Cadmium Given off by Glazed Tiles First Edition Ceramic Tiles - Part 16: Determination of Small Colour Differences First Edition Chemical Conversion Coatings - Rinsed and Non-Rinsed Chromate Conversion Coatings on Aluminium and Aluminium Alloys First Edition Carbon Fibre - Determination of Size Content Second Edition

ISO

10550

Micrographics - Planetary Camera Systems - Test Target for Checking Performance First Edition Ergonomics of the Thermal Environment - Assessment of the Influence of the Thermal Environment Using Subjective Judgement Scales First Edition Timekeeping Instruments - Crowns and Sealed Tubes - Designs and Dimensions First Edition Horology - Procedure for Evaluating the Accuracy of Quartz Watches First Edition; Replaces ISO TR 10553 Sterile, Single-Use Intravascular Catheters - Part 1: General Requirements First Edition; CEN EN ISO 10 555-1: 1996; Amendment 1: 7/15/99; Amendment 2: 05/15/2004

ISO ISO ISO

10551 10552 10553

ISO

10555-1

ISO ISO ISO

10555-2 10555-3 10555-4

ISO

10555-5

ISO ISO ISO

10561 10563 10564

ISO ISO ISO ISO ISO ISO

10565 10566 10567 10570 10571 10573

ISO ISO ISO ISO

10576-1 10578 10579 10583

ISO

10585

Information and Documentation - Armenian Alphabet Coded Character Set for Bibliographic Information Interchange First Edition

ISO

10586

ISO

10587

Information and Documentation - Georgian Alphabet Coded Character Set for Bibliographic Information Interchange First Edition Metallic and Other Inorganic Coatings - Test for Residual Embrittlement in both Metallic-Coated and Uncoated Externally-Threaded Articles and Rods - Inclined Wedge Method First Edition

Sterile, Single-Use Intravascular Catheters - Part 2: Angiographic Catheters First Edition; Technical Corrigendum 1: 6/15/2002 Sterile, Single-Use Intravascular Catheters - Part 3: Central Venous Catheters First Edition; Corrigendum 1: 6/15/2002 Sterile, Single-Use Intravascular Catheters - Part 4: Balloon Dilatation Catheters First Edition; Corrigendum 1: 6/15/2002 Sterile, Single-Use Intravascular Catheters - Part 5: Over-Needle Peripheral Catheters First Edition; Amendment 1: 01/15/1999; Corrected and Reprinted 07/15/1999: Corrigendum 1: 6/15/2002 Information Technology - Office Equipment - Printing Devices - Method for Measuring Throughput - Class 1 and Class 2 Printers Second Edition Building construction - Sealants - Determination of change in mass and volume Second Edition Soldering and Brazing Materials - Methods for the Sampling of Soft Solders for Analysis First Edition Oilseeds - Simultaneous Determination of Oil and Water Contents - Method Using Pulsed Nuclear Magnetic Resonance Spectrometry Second Edition Water Quality - Determination of Aluminium - Spectrometric Method Using Pyrocatechol Violet First Edition Earth-Moving Machinery - Hydraulic Excavators - Lift Capacity First Edition; (Corrected and Reprinted - 1993) Earth-moving machinery Articulated frame lock Performance requirements Second Edition Tyres for Mobile Cranes and Similar Specialized Machines First Edition Soil Quality - Determination of Water Content in the Unsaturated Zone - Neutron Depth Probe Method First Edition Statistical Methods - Guidelines for the Evaulation of Conformity with Specified Requirements - Part 1: General Principles First Edition Technical Drawings - Tolerancing of Orientation and Location - Projected Tolerance Zone First Edition Technical Drawings - Dimensioning and Tolerancing - Non-Rigid Parts First Edition Aerospace Fluid Systems - Test Methods for Tube/Fitting Assemblies First Edition

ISO

10588

ISO

10589

ISO

10590

ISO ISO ISO ISO ISO

10591 10592 10594 10597 10599-1

ISO ISO ISO

10599-2 10601 10604

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

10605 10618 10620 10621 10622 10624 10625 10626 10627-1 10627-2 10628

ISO ISO ISO

10629 10630 10631

ISO

10632

Information Technology - Use of X.25 Packet Layer Protocol in Conjunction with X.21/X.21 bis to Provide the OSI Connection-Mode Network Service First Edition; (CCITT RECMN X.613) Information Technology - Telecommunications and Information Exchange Between Systems - Intermediate System to Intermediate System Intra-Domain Routeing Information Exchange Protocol for Use in Conjunction with the Protocol for Providing the Connectionless-Mode Network Service (ISO 8473) Second Edition Building construction Sealants Determination of tensile properties of sealants at maintained extension after immersion in water Second Edition Building construction Sealants Determination of adhesion/cohesion properties of sealants after immersion in water Second Edition Small Craft - Hydraulic Steering Systems First Edition Micrographics Rotary Camera Systems Test Target for Checking Performance Second Edition Road vehicles Flat attachment fixing nuts for commercial vehicles Test methods Second Edition Car Radios - Coaxial Aerial Connectors - Part 1: Dimensions First Edition Car radios - Coaxial aerial connectors - Part 2: Characteristic values, performance requirements and tests First Edition; Corrigendum 1:9/15/2005 Micaceous iron oxide pigments for paints ù Specifications and test methods Second edition Road Vehicles - Measurement Equipment for Orientation of Headlamp Luminous Beams First Edition Road Vehicles - Test Methods for Electrical Disturbances from Electrostatic Discharge First Edition; Cancels and Replaces ISO TR 10605 Carbon Fibre - Determination of Tensile Properties of Resin-Impregnated Yarn Second Edition Dried Sweet Marjoram (Origanum Majorana L.) - Specification First Edition Dehydrated Green Pepper (Piper Nigrum L.) - Specification First Edition Large Cardamom (Amomum Subulatum Roxb.), as Capsules and Seeds - Specification First Edition Oil of Elemi (Canarium Luzonicum Miq.) First Edition Equipment for Crop Protection - Sprayer Nozzles - Colour Coding for Identification Second Edition Equipment for Crop Protection - Sprayers - Connecting Dimensions for Nozzles with Bayonet Fixing First Edition Agricultural Sprayers - Data Sheet - Part 1: Typical Layout First Edition Hydraulic Agricultural Sprayers - Data Sheets - Part 2: Technical Specifications Related to Components First Edition Flow Diagrams for Process Plants - General Rules First Edition Raw Optical Glass - Resistance to Attack by Aqueous Alkaline Solutions at 50 Degrees C - Test Method and Classification First Edition Industrial Plate Screens - Specifications and Test Methods First Edition Metallic Butterfly Valves for General Purposes First Edition Oilseed Residues - Simultaneous Determination of Oil and Water Contents - Method Using Pulsed Nuclear Magnetic Resonance Spectroscopy First Edition

ISO

10633-1

ISO ISO

10634 10635

ISO ISO

10636 10637

ISO

10639

ISO ISO ISO ISO

10641 10642 10644 10645

ISO

10646 AMD 2

ISO

10646 AMD 1

ISO ISO

10646 10648-1

ISO

10648-2

ISO

10650-1

ISO

10650-2

ISO ISO

10651-2 10651-3

ISO

10651-4

ISO

10651-5

Oilseed Residues - Determination of Glucosinolates Content - Part 1: Method Using High-Performance Liquid Chromatography First Edition Water Quality - Guidance for the Preparation and Treatment of Poorly Water-Soluble Organic Compounds for the Subsequent Evaluation of Their Biodegradability in an Aqueous Medium First Edition (CEN EN ISO 10634: 1995) Refractory Products - Methods of Test for Ceramic Fibre Products First Edition Photography - Processing Chemicals - Specifications for Anhydrous Sodium Thiosulfate and Sodium Thiosulfate Pentahydrate First Edition; Dental Equipment - High- and Medium-Volume Suction Systems First Edition Plastics piping systems for pressure and non-pressure water supply Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin First Edition Information Technology - Computer Graphics and Image Processing - Conformance Testing of Implementations of Graphics Standards First Edition Hexagon socket countersunk head screws Second Edition Screw and Washer Assemblies with Plain Washers - Washer Hardness Classes 200 HV and 300 HV First Edition Nuclear Energy - Light Water Reactors - Calculation of the Decay Heat Power in Nuclear Fuels First Edition Information technology ù Universal Multiple-Octet Coded Character Set (UCS) AMENDMENT 2: N'Ko, Phags-pa, Phoenician and other characters First Edition Information technology ù Universal Multiple-Octet Coded Character Set (UCS) AMENDMENT 1: Glagolitic, Coptic, Georgian and other characters First Edition Information Technology - Universal Multiple-Octet Coded Character Set (UCS) First Edition [Replaced: ISO 10646-1, ISO 10646-1, ISO 10646-1, ISO 10646-2] Containment Enclosures - Part 1: Design Principles First Edition Containment Enclosures - Part 2: Classification According to Leak Tightness and Associated Checking Methods First Edition Dentistry Powered polymerization activators Part 1: Quartz tungsten halogen lamps First Edition; Together with ISO 10650-2 Replaces ISO TS 10650:1999 Dentistry ù Powered polymerization activators ù Part 2: Light-emitting diode (LED) lamps First Edition [Cancelled: ISO TS 10650] Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 2: Home care ventilators for ventilatordependent patients Second Edition Lung Ventilators for Medical Use - Part 3: Particular Requirements for Emergency and Transport Ventilators First Edition Lung Ventilators- - Part 4: Particular Requirements for Operator-Powered Resuscitators First Edition; Together with ISO 106515:2006 replaces ISO 8382:1988 [Superseded: ASTM F 920, ASTM F 920] Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 5: Gas-powered emergency resuscitators First Edition; Together with ISO 10651-4:2002 replaces ISO 8382:1988 [Superseded: ASTM F 920, ASTM F 920]

ISO

10651-6

ISO

10653

ISO ISO

10654 10656

ISO ISO ISO ISO ISO ISO ISO ISO

10658 10663 10664 10666 10669 10673 10683 10684

ISO

10691

ISO

10692-1

ISO ISO ISO

10692-2 10693 10694

ISO

10695

ISO

10697-1

ISO ISO

10697-2 10698

ISO ISO ISO

10700 10701 10702

Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 6: Home-care ventilatory support devices First Edition; Partly replaces ISO 10651-2:1996 Light-Gauge Metal Containers - Round Open-Top Cans - Cans Defined by Their Nominal Gross Lidded Capacities First Edition; Light-Gauge Metal Containers - Round Open-Top Cans - Cans for Liquid Products with Added Gas, Defined by Their Nominal Filling Volumes First Edition; Electric Resistance Welding - Integrated Transformers for Welding Guns First Edition; Corrigendum 1: 07/01/2000 Industrial Trucks Operating in Special Conditions of Stacking with Load Laterally Displaced by Powered Devices - Additional Stability Test First Edition Hexagon Nuts with Flange - Fine Pitch Thread First Edition Hexalobular internal driving feature for bolts and screws Second Edition Drilling Screws With Tapping Screw Thread - Mechanical and Functional Properties First Edition Plain Washers for Tapping Screw and Washer Assemblies - Normal and Large Series - Product Grade A First Edition Plain Washers for Screw and Washer Assemblies - Small, Normal and Large Series - Product Grade A First Edition Fasteners - Non-Electrolytically Applied Zinc Flake Coatings First Edition; JIS B 1046:2005 Fasteners Hot dip galvanized coatings First Edition Gas cylinders Refillable welded steel cylinders for liquified petroleum gas (LPG) Procedures for checking before, during and after filling First Edition Gas Cylinders Gas Cylinder Valve Connections for use in the Micro-Electronics Industry Part 1: Outlet Connections First Edition Gas Cylinders - Gas Cylinder Valve Connections for Use in the Micro-Electronics Industry - Part 2: Specification and Type Testing for Valve to Cylinder Connections First Edition Soil Quality - Determination of Carbonate Content - Volumetric Method First Edition Soil Quality - Determination of Organic and Total Carbon After Dry Combustion (Elementary Analysis) First Edition Water Quality - Determination of Selected Organic Nitrogen and Phosphorus Compounds - Gas Chromatographic Methods First Edition Steel - Determination of Calcium Content by Flame Atomic Absorption Spectrometry - Part 1: Determination of Acid- Soluble Calcium Content First Edition Steel - Determination of Calcium Content by Flame Atomic Absorption Spectrometry - Part 2: Determination of Total Calcium Content Steel - Determination of Antimony Content - Electrothermal Atomic Absorption Spectrometric Method First Edition Steel and Iron - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method First Edition (CEN EN ISO 10700: 1995) Steel and Iron - Determination of Sulfur Content - Methylene Blue Spectrophotometric Method First Edition Steer and Iron - Determination of Nitrogen Content - Titrimetric Method After Distillation First Edition

ISO

10703

ISO ISO

10705-1 10705-2

ISO

10705-3

ISO

10705-4

ISO

10706

ISO

10707

ISO ISO ISO ISO ISO ISO

10708 10712 10713 10714 10715 10716

ISO

10718

ISO ISO ISO

10720 10721-1 10721-2

ISO ISO

10722 10723

ISO

10724-1

ISO ISO ISO

10724-2 10725 10726

Water Quality - Determination of the Activity Concentration of Radionuclides by High Resolution Gamma-Ray Spectrometry First Edition Water Quality - Detection and Enumeration of Bacteriophages - Part 1: Enumeration of F-Specific RNA Bacteriophages First Edition Water Quality - Detection and Enumeration of Bacteriophages - Part 2: Enumeration of Somatic Coliphages First Edition Water quality Detection and enumeration of bacteriophages Part 3: Validation of methods for concentration of bacteriophages from water First Edition Water Quality - Detection and Enumeration of Bacteriophages - Part 4: Enumeration of Bacteriophages Infecting Bacteroides Fragilis First Edition Water Quality - Determination of Long Term Toxicity of Substances to Daphnia Magna Straus (Cladocera, Crustacea) First Edition Water Quality - Evaluation in an Aqueous Medium of theUltimate" Aerobic Biodegradability of Organic Compounds - Method by Analysis of Biochemical Oxygen Demand (Closed Bottle Test) First Edition" Water Quality - Evaluation in an Aqueous Medium of the Ultimate Aerobic Biodegradability of Organic Compounds - Determination of Biochemical Oxygen Demand in a Two-Phase Closed Bottle Test First Edition Water Quality - Pseudomonas Putida Growth Inhibition Test (Pseudomonas Cell Multiplication Inhibition Test) First Edition Jewellery - Gold Alloy Coatings First Edition Steel and Iron - Determination of Phosphorus Content - Phosphovanadomolybdate Spectrophotometric Method First Edition Natural Gas - Sampling Guidelines First Edition Paper and Board - Determination of Alkali Reserve First Edition Cork Stoppers - Enumeration of Colony-Forming Units of Yeasts, Moulds and Bacteria Capable of Growth in an Alcoholic Medium Second Edition Steel and Iron - Determination of Nitrogen Content - Thermal Conductimetric Method After Fusion in a Current of Inert Gas First Edition; BS 6200: Part 3: Section 3.22: Subsection 3.22.4: 1997 Steel Structures - Part 1: Materials and Design First Edition Steel Structures - Part 2: Fabrication and Erection First Edition; Corrected and Reprinted 09-15-2000 Geosynthetics ù Index test procedure for the evaluation of mechanical damage under repeated loading ù Damage caused by granular material FIrst Edition [Superseded: ISO TR 10722-1] Natural Gas - Performance Evaluation for On-Line Analytical Systems First Edition; Technical Corrigendum 1-1998 Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 1: General Principles and Moulding of Multipurpose Test Specimens First Edition Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 2: Small Plates First Edition Acceptance Sampling Plans and Procedures for the Inspection of Bulk Materials First Edition Portable Chain-Saws - Chain Catcher - Dimensions and Mechanical Strength First Edition

ISO

10727

ISO

10728

ISO

10731

ISO ISO

10732 10733

ISO ISO

10736 10737

ISO

10741-1

ISO ISO ISO ISO ISO ISO

10742 10744 10745 10746-1 10746-2 10746-3

ISO

10746-4

ISO ISO

10747 10752

ISO

10753

ISO ISO

10754 10762

ISO

10763

Tea and Instant Tea in Solid Form - Determination of Caffeine Content - Method Using High-Performance Liquid Chromatography Second Edition Information Technology - Information Resource Dictionary System (IRDS) Services Interface First Edition; Amendment 1-1995; Amendment 2-1996; Amendment 3-1996; Amendment 4-1998 Information Technology - Open Systems Interconnection - Basic Reference Model - Conventions for the Definition of OSI Services First Edition Information Technology - Use of X.25 Packet Layer Protocol to Provide the OSI Connection-Mode Network Service over the Telephone Network First Edition; (CCITT RECMN X.614) Information Technology - Elements of Management Information Related to OSI Network Layer Second Edition Information Technology - Telecommunications and Information Exchange Between Systems - Transport Layer Security Protocol First Edition Information Technology - Elements of Management Information Related to the OSI Transport Layer Second Edition Information Technology - User System Interfaces - Dialogue Interaction - Part 1: Cursor Control for Text Editing First Edition; Amendment 1 - 12/15/1996 Information Technology - Telecommunications and Information Exchange Between Systems - Elements of Management Information Related to OSI Data Link Layer Standards First Edition; Amendment 1-11/15/1995; Amendment 2-07/15/1996; Amendment 312/15/1996; Corrigendum 1-06/15/1999 Information Technology - Hypermedia/Time-Based Structuring Language (HyTime) Second Edition Information Technology - Open Systems Interconnection - Upper Layers Security Model First Edition Information Technology - Open Distributed Processing - Reference Model: Overview First Edition Information Technology - Open Distributed Processing - Reference Model: Foundations First Edition Information Technology - Open Distributed Processing - Reference Model: Architecture First Edition Information Technology - Open Distributed Processing - Reference Model: Architectural Semantics First Edition; Amendment 1: 12/15/2001 Information Technology - Telecommunications and Information Exchange between Systems - Protocol for Exchange of Inter-Domain Routeing Information Among Intermediate Systems to Support Forwarding of ISO 8473 PDUs First Edition; Amendment 1-1996; Corrigendum 1-1996 Coal Sizing Equipment - Performance Evaluation First Edition Coal Preparation Plant - Assessment of the Liability to Breakdown in Water of Materials Associated with Coal Seams First Edition Information and Documentation - Extension of the Cyrillic Alphabet Coded Character Set for Non-Slavic Languages for Bibliographic Information Interchange FIrst Edition Hydraulic Fluid Power - Cylinder Mounting Dimensions - 10 MPa (100 Bar) Series First Edition Hydraulic Fluid Power - Plain-End, Seamless and Welded Precision Steel Tubes - Dimensions and Nominal Working Pressures First Edition

ISO

10766

Hydraulic fluid power Cylinders Housing dimensions for rectangularsection- cut bearing rings for pistons and rods Second Edition Hydraulic Fluid Power - Determination of Pressure Ripple Levels Generated in Systems and Components - Part 1: Precision Method for Pumps First Edition Hydraulic Fluid Power - Determination of Pressure Ripple Levels Generated in Systems and Components - Part 2: Simplified Method for Pumps First Edition Hydraulic Fluid Power - Determination of Pressure Ripple Levels Generated in Systems and Components - Part 3: Method for Motors First Edition Hydraulic Fluid Power - Electrically Modulated Hydraulic Control Valves - Part 1: Test Methods for Four-Way Directional Flow Control Valves First Edition; Together with ISO 10770-2, it Cancels and Replaces ISO 6404: 1985 Hydraulic Fluid Power - Electrically Modulated Hydraulic Control Valves - Part 2: Test Methods for Three-Way Directional Flow Control Valves First Edition; Together with ISO 10770-1, it Cancels and Replaces ISO 6404: 1985

ISO

10767-1

ISO

10767-2

ISO

10767-3

ISO

10770-1

ISO

10770-2

ISO ISO ISO

10771-1 10775 10780

ISO

10782-1

ISO

10787-1

ISO ISO

10787-2 10787-3

ISO

10790

ISO

10791-1

ISO

10791-2

ISO

10791-3

Hydraulic Fluid Power - Fatigue Pressure Testing of Metal Pressure-Containing Envelopes - Part 1: Test Methods First Edition Paper, Board and Pulps - Determination of Cadmium Content - Atomic Absorption Spectrometric Method First Edition Stationary Source Emissions - Measurement of Velocity and Volume Flowrate of Gas Streams in Ducts First Edition Definitions and Attributes of Data Elements for Control and Monitoring of Textile Processes - Part 1: Spinning, Spinning Preparatory and Related Processes Definitions Et Attributs Des Elements De Donnees Pour La Surveillance Et La Supervision Des Procedes Textiles - Partie 1: Filature, Preparation De Filature Et Procedes Associes First Edition Textile Machinery and Accessories - Heald Frames - Part 1: Heald-Carrying Rod Fixed to the Frame Stave by Rod Support Coordinated Dimensions First Edition; Textile Machinery and Accessories - Heald Frames - Part 2: Heald-Carrying Rod Fixed Directly on the Frame Stave - Coordinated Dimensions First Edition; Textile Machinery and Accessories - Heald Frames - Part 3: Guides for Heald Frames First Edition Measurement of Fluid Flow in Closed Conduits - Guidance to the Selection, Installation and Use of Coriolis Meters (Mass Flow, Density and Volume Flow Measurements) Second Edition; Amendment 1: 6/01/2003 Test Conditions for Machining Centres - Part 1: Geometric Tests for Machines with Horizontal Spindle and with Accessory Heads (Horizontal Z-Axis) First Edition; Corrected and Reprinted 05/01/1999 Test Conditions for Machining Centres - Part 2: Geometric Tests for Machines with Vertical Spindle or Universal Heads with Vertical Primary Rotary Axis (Vertical Z-Axis) First Edition Test Conditions for Machining Centres - Part 3: Geometric Tests for Machines with Integral Indexable or Continuous Universal Heads (Vertical Z-Axis) First Edition; Corrigendum 1: 11-15-99

ISO

10791-4

Test Conditions for Machining Centres - Part 4: Accuracy and Repeatability of Positioning of Linear and Rotary Axes First Edition

ISO

10791-5

Test Conditions for Machining Centres - Part 5: Accuracy and Repeatability of Positioning of Work-Holding Pallets First Edition

ISO ISO

10791-6 10791-7

Test Conditions for Machining Centres - Part 6: Accuracy of Feeds, Speeds and Interpolations First Edition; Technical Corrigendum 1:4/1/2004 Test Conditions for Machining Centres - Part 7: Accuracy of a Finished Test Piece First Edition

ISO

10791-8

Test Conditions for Machining Centres - Part 8: Evaluation of Contouring Performance in the Three Coordinate Planes First Edition

ISO ISO

10791-9 10791-10

ISO

10792-1

ISO

10792-2

ISO ISO ISO ISO ISO ISO

10792-3 10799 10802 10803 10804-1 10806

ISO

10807

ISO ISO ISO

10813-1 CORR 1 10813-1 10814

Test Conditions for Machining Centres - Part 9: Evaluation of the Operating Times of Tool Change and Pallet Change First Edition Test conditions for machining centres ù Part 10: Evaluation of thermal distortions First Edition Aerospace - Airframe Spherical Plain Bearings in Corrosion- Resisting Steel with Self-Lubricating Liner - Part 1: Metric Series First Edition Aerospace - Airframe Spherical Plain Bearings in Corrosion- Resisting Steel with Self-Lubricating Liner - Part 2: Inch Series First Edition Aerospace - Airframe Spherical Plain Bearings in Corrosion- Resisting Steel with Self-Lubricating Liner - Part 3: Technical Specification First Edition Structural Steels - Cold-Formed, Welded, Structural Hollow Sections - Technical Delivery Requirements First Edition Ductile Iron Pipelines - Hydrostatic Testing After Installation First Edition Design Method for Ductile Iron Pipes First Edition Restrained Joint Systems for Ductile Iron Pipelines - Part 1: Design Rules and Type Testing First Edition Pipework Fittings for corrugated metal hoses Second Edition Pipework - Corrugated Flexible Metallic Hose Assemblies for the Protection of Electrical Cables in Explosive Atmospheres First Edition Vibration generating machines ù Guidance for selection ù Part 1: Equipment for environmental testing TECHNICAL CORRIGENDUM 1 First Edition Vibration generating machines ù Guidance for selection ù Part 1 Equipment for environmental testing First Edition Mechanical Vibration - Susceptibility and Sensitivity of Machines to Unbalance First Edition

ISO

10815

ISO

10816-1

ISO

10816-2

Mechanical Vibration - Measurement of Vibration Generated Internally in Railway Tunnels by the Passage of Trains First Edition Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 1: General Guidelines First Edition; Replaces ISO 2372: 1974 and ISO 3945: 1985 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min Second Edition; Corrigendum 1:08/01/2004

ISO

10816-3

Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 3: Industrial Machines with Nominal Power Above 15 kW and Nominal Speeds between 120 r/min and 15 000 r/min When Measured In Situ First Edition

ISO

10816-4

ISO

10816-5

ISO ISO

10816-6 10817-1

ISO ISO ISO ISO

10819 10821 10823 10825

ISO

10833

ISO ISO ISO

10834 10835 10836

ISO

10838-1

ISO

10838-2

ISO ISO ISO ISO ISO ISO

10838-3 10840 10841 10842 10843 10844

ISO

10846-1

ISO

10846-2

ISO

10846-3

Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 4: Gas Turbine Driven Sets Excluding Aircraft Derivatives First Edition Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 5: Machine Sets in Hydraulic Power Generating and Pumping Plants First Edition Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 6: Reciprocating Machines with Power Ratings Above 100 kW First Edition Rotating Shaft Vibration Measuring Systems - Part 1: Relative and Absolute Sensing of Radial Vibration First Edition Mechanical Vibration and Shock - Hand-Arm Vibration - Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand First Edition Industrial sewing machines Safety requirements for sewing machines, units and systems First Edition Guidelines for the selection of roller chain drives Second Edition Gears - Wear and Damage to Gear Teeth - Terminology First Edition Textile Floor Coverings - Determination of Resistance to Damage at Cut Edges Using the Modified Vettermann Drum Test Second Edition Textile Floor Coverings - Non-Destructive Measurement of Pile Thickness Above the Backing - WRONZ Gauge Method First Edition (AS/NZS 2111.21: 1996) Direct reduced iron and hot briquetted iron ù Sampling and sample preparation Second Edition Iron Ores - Method of Sampling and Sample Preparation for Physical Testing First Edition Mechanical Fittings for Polyethylene Piping Systems for the Supply of Gaseous Fuels - Part 1: Metal Fittings for Pipes of Nominal Outside Diameter Less Than or Equal to 63 mm First Edition Mechanical Fittings for Polyethylene Piping Systems for the Supply of Gaseous Fuels - Part 2: Metal Fittings for Pipes of Nominal Outside Diameter Greater Than 63 mm First Edition Mechanical Fittings for Polyethylene Piping Systems for the Supply of Gaseous Fuels - Part 3: Thermoplastics Fittings for Pipes of Nominal Outside Diameter Less Than or Equal to 63 mm First Edition Plastics - Guidance for the Use of Standard Fire Tests First Edition; Replaces ISO TR 10840 Aircraft - Catering Vehicle for Large Capacity Aircraft - Functional Requirements First Edition Aircraft Ground service connections Locations and types First Edition Acoustics - Methods for the Description and Physical Measurement of Single Impulses or Series of Impulses First Edition Acoustics - Specification of Test Tracks for the Purpose of Measuring Noise Emitted by Road Vehicles First Edition Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 1: Principles and Guidelines First Edition Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 2: Dynamic Stiffness of Elastic Supports for Translatory Motion - Direct Method First Edition Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 3: Indirect Method for Determination of the Dynamic Stiffness of Resilient Supports for Translatory Motion First Edition

ISO ISO

10846-4 10847

ISO

10848-1

ISO

10848-2 CORR 1

ISO

10848-2

ISO

10848-3

ISO

10849

Acoustics and vibration Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion First Edition Acoustics - In-Situ Determination of Insertion Loss of Outdoor Noise Barriers of All Types First Edition Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 1: Frame document First Edition Acoustics ù Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms ù Part 2: Application to light elements when the junction has a small influence Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 2: Application to light elements when the junction has a small influence First Edition;:2000 [Replaced: ISO 140-12] Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 3: Application to light elements when the junction has a substantial influence First Edition Stationary Source Emissions - Determination of the Mass Concentration of Nitrogen Oxides - Performance Characteristics of Automated Measuring Systems First Edition

ISO

10857

Information Technology - Microprocessor Systems - Futurebus+ - Logical Protocol Specification First Edition; (ANSI/IEEE 896.1)

ISO

10859

ISO

10861

ISO

10882-1

ISO ISO ISO ISO

10882-2 10885 10887 10888

Information Technology - 8-Bit Backplane Interface: STEbus and Mechanical Core Specifications for Microcomputers First Edition Information Technology - Microprocessor Systems - High-Performance Synchronous 32-Bit Bus: MULTIBUS II First Edition; (ANSI/IEEE 1296) Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator┤s Breathing Zone Part 1: Sampling of Airborne Particles First Edition Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator┤s Breathing Zone Part 2: Sampling of Gases First Edition Information Technology - 356 mm Optical Disk Cartridge for Information Interchange - Write Once First Edition Key Type Three-Jaw Drill Chucks - Specification First Edition Keyless Type Three-Jaw Drill Chucks - Specification First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO

10889-1 10889-2 10889-3 10889-4 10889-5 10889-6 10889-7 10889-8 10897

Tool Holders with Cylindrical Shank - Part 1: Cylindrical Shank, Location Bore - Technical Delivery Conditions Second Edition Tool Holders with Cylindrical Shank - Part 2: Type A, Shanks for Tool Holders of Special Designs Second Edition Tool Holders with Cylindrical Shank - Part 3: Type B with Rectangular Radial Seat Second Edition Tool Holders with Cylindrical Shank - Part 4: Type C with Rectangular Axial Seat Second Edition Tool Holders with Cylindrical Shank - Part 5: Type D, with More Than One Rectangular Seat First Edition Tool Holders with Cylindrical Shank - Part 6: Type E, with Cylindrical Seat Second Edition Tool Holders with Cylindrical Shank - Part 7: Type F with Taper Seat Second Edition Tool Holders with Cylindrical Shank - Part 8: Type Z, Accessories First Edition Collets for Tool Holders with Taper Ratio 1:10 - Collets, Holders, Nuts First Edition

ISO ISO

10898 10899

ISO ISO ISO ISO

10907-1 10910 10911 10914

ISO ISO

10918-1 10918-2

ISO

10918-3

ISO ISO ISO

10918-4 10919 10920

ISO

10928

ISO ISO ISO ISO ISO ISO

10931 10933 10934-1 10934-2 10935 10936-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO

10936-2 10937 10938 10939 10940 10942 10943 10944 10945

Spot Drills First Edition (BS 328: Part 8: 1992) (NZS/BS 328: Pt 8: 1992) High-Speed Steel Two-Flute Twist Drills - Technical Specifications First Edition Tools For Moulding - Locating Rings - Part 1: Locating Rings for Mounting without Thermal Insulating Sheets in Small or Medium Moulds - Types A and B First Edition Classification and Designation of Approximate Chip Control Zones for Indexable Inserts with Chipbreakers First Edition Solid Hardmetal End Mills With Parallel Shank - Dimensions First Edition Assembly Tools for Screws and Nuts - Sockets and Wrenches for Spline Drive First Edition Information technology - Digital compression and coding of continuous-tone still images - Part 1: Requirements and guidelines First Edition; Corrigendum 1:2005 Information Technology - Digital Compression and Coding of Continuous-Tone Still Images: Compliance Testing First Edition Information Technology - Digital Compression and Coding of Continuous-Tone Still Images: Extensions First Edition; Amendment 1: 12/01/1999 Information Technology - Digital Compression and Coding of Continuous-Tone Still Images: Registration of JPEG Profiles, SPIFF Profiles, SPIFF Tags, SPIFF Colour Spaces, APPn Markers, SPIFF Compression Types and Registration Authorities (REGAUT) First Edition Oriental Leaf Tobacco - Baling First Edition Gas Cylinders - 25E Taper Thread for Connection of Valves to Gas Cylinders - Specification First Edition Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Methods for Regression Analysis and their Use First Edition Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system First Edition; Replaces ISO 10931-1 thru 10931-5 Polyethylene (PE) Valves for Gas Distribution Systems First Edition Optics and optical instruments - Vocabulary for microscopy - Part 1: Light microscopy First Edition Optics and optical instruments ù Vocabulary for microscopy ù Part 2: Advanced techniques in light microscopy First Edition Optics and Optical Instruments - Microscopes - Interfacing Connection Type C First Edition Optics and Optical Instruments - Operation Microscopes - Part 1: Requirements and Test Methods First Edition Optics and Optical Instruments - Operation Microscopes - Part 2: Light Hazard from Operation Microscopes Used in Ocular Surgery First Edition Optics and Optical Instruments - Microscopes - Diameter of Interchangeable Eyepieces Second Edition Ophthalmic Instruments - Chart Projectors First Edition Ophthalmic Instruments - Slit-Lamp Microscopes Second Edition Ophthalmic Instruments - Fundus Cameras First Edition Ophthalmic Instruments - Direct Ophthalmoscopes Second Edition Ophthalmic Instruments - Indirect Ophthalmoscopes Second Edition Ophthalmic Instruments - Synoptophores First Edition Hydraulic Fluid Power - Gas-Loaded Accumulators - Dimensions of Gas Ports First Edition

ISO

10946

ISO ISO ISO ISO ISO ISO

10952 10955 10957 10958-1 10958-2 10959

ISO ISO ISO ISO ISO ISO ISO

10960 10962 10964 10965 10966 10967-1 10967-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

10967-3 10968 10972-1 10972-3 10972-4 10972-5 10973 10977 10979 10980

ISO ISO

10981 10983

ISO ISO ISO ISO ISO

10985 10990-4 10990-5 10993-1 10993-2

Hydraulic Fluid Power - Gas-Loaded Accumulators with Separator - Selection of Preferred Hydraulic Ports First Edition Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Determination of the Resistance to Chemical Attack from the Inside of a Section in a Deflected Condition First Edition Aerospace - End-Fittings and Turnbarrels for Aircraft Control Wire Rope - Technical Specification First Edition Information and Documentation - International Standard Music Number (ISMN) First Edition Snowboards - Binding Mounting Area - Part 1: Requirements and Test Methods for Snowboards without Inserts First Edition Snowboards - Binding Mounting Area - Part 2: Requirements and Test Methods for Snowboards with Inserts Second Edition Aerospace - MJ Threads - Gauging First Edition Rubber and Plastics Hoses - Assessment of Ozone Resistance Under Dynamic Conditions First Edition CEN EN ISO 10 960: 1996 Securities and Related Financial Instruments - Classification of Financial Instruments (CFI Code) Second Edition Adhesives - Determination of Torque Strength of Anaerobic Adhesives on Threaded Fasteners First Edition Textile Floor Coverings - Determination of Electrical Resistance First Edition; Technical Corrigendum 1: 10/15/1999 Sports and recreational equipment Fabrics for awnings and camping tents Specification Second edition Information Technology - Language Independent Arithmetric - Part 1: Integer and Floating Point Arithmetic First Edition Information Technology - Language Independent Arithmetric - Part 2: Elementary Numerical Functions First Edition Information technology Language independent arithmetic Part 3: Complex integer and floating point arithmetic and complex elementary numerical functions First Edition Earth-Moving Machinery - Operator┤s Controls Second Edition Cranes - Requirements for Mechanisms - Part 1: General First Edition Cranes Requirements for mechanisms Part 3: Tower cranes First Edition Cranes ù Requirements for mechanisms ù Part 4: Jib cranes First Edition Cranes Requirements for mechanisms Part 5: Bridge and gantry cranes First Edition Cranes - Spare Parts Manual First Edition Photography - Processed Photographic Colour Films and Paper Prints - Methods for Measuring Image Stability First Edition Identification of Fuel Assemblies for Nuclear Power Reactors First Edition Validation of the Strength of Reference Solutions Used for Measuring Concentrations First Edition Nuclear fuel technology Determination of uranium in reprocessing-plant dissolver solution Liquid chromatography method Second Edition Timber Structures - Solid Timber Finger-Jointing - Production Requirements First Edition Caps Made of Aluminium-Plastics Combinations for Infusion Bottles and Injection Vials - Requirements and Test Methods Second Edition Animal (Mammal) Traps - Part 4: Methods for Testing Killing-Trap Systems Used on Land or Underwater First Edition Animal (Mammal) Traps - Part 5: Methods for Testing Restraining Traps First Edition Biological Evaluation of Medical Devices - Part 1: Evaluation and Testing Third Edition Biological evaluation of medical devices Part 2: Animal welfare requirements Second Edition

ISO

10993-3

Biological evaluation of medical devices Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity Second Edition

ISO ISO ISO ISO

10993-4 AMD 1 10993-4 10993-5 10993-6

Biological evaluation of medical devices ù Part 4: Selection of tests for interactions with blood AMENDMENT 1 Second Edition Biological Evaluation of Medical Devices - Part 4: Selection of Tests for Interactions with Blood Second Edition Biological Evaluation of Medical Devices - Part 5: Tests for In Vitro Cytotoxicity Second Edition Biological evaluation of medical devices ù Part 6: Tests for local effects after implantation Second Edition

ISO

10993-7

ISO

10993-9

ISO

DIS 10993-9

ISO ISO ISO

10993-10 AMD 1 10993-10 10993-11

ISO

10993-12

ISO

10993-13

ISO

10993-14

ISO

10993-15

Biological evaluation of medical devices ù Part 9: Framework for identification and quantification of potential degradation products Biological evaluation of medical devices ù Part 10: Tests for irritation and delayed-type hypersensitivity AMENDMENT 1 Second Edition Biological evaluation of medical devices ù Part 10: Tests for irritation and delayed-type hypersensitivity Second Edition Biological evaluation of medical devices Part 11: Tests for systemic toxicity Second Edition Biological Evaluation of Medical Devices - Part 12: Sample Preparation and Reference Materials Second Edition; Corrected Version 06/01/2003 Biological Evaluation of Medical Devices - Part 13: Identification and Quantification of Degradation Products from Polymeric Medical Devices First Edition Biological Evaluation of Medical Devices - Part 14: Identification and Quantification of Degradation Products from Ceramics First Edition Biological Evaluation of Medical Devices - Part 15: Identification and Quantification of Degradation Products from Metals and Alloys First Edition; Corrected and Reprinted: 4/01/2001

ISO

10993-16

Biological Evaluation of Medical Devices - Part 16: Toxicokinetic Study Design for Degradation Products and Leachables First Edition

ISO ISO

10993-17 10993-18

ISO ISO ISO ISO ISO

10994 10996 10997 10998 11001-1

Biological Evaluation of Medical Devices - Part 17: Establishment of Allowable Limits for Leachable Substances First Edition Biological evaluation of medical devices Part 18: Chemical characterization of materials First Edition Information Technology - Data Interchange on 90 mm Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 31 831 ftprad on 80 Tracks on Each Side - ISO Type 303 First Edition Photography - Still-Picture Projectors - Determination of Noise Emissions First Edition Passenger Vehicles - Side Impact with Deformable Moving Barrier - Full Scale Test First Edition Agricultural Wheeled Tractors - Steering Requirements First Edition Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 1: U-Frame Coupler First Edition

Biological Evaluation of Medical Devices - Part 7: Ethylene Oxide Sterilization Residuals First Edition; (CEN EN ISO 10993-7: 1995) Biological Evaluation of Medical Devices - Part 9: Framework for Identification and Quantification of Potential Degradation Products First Edition

ISO ISO ISO

11001-2 11001-3 11001-4

ISO

11003-1

ISO ISO ISO ISO ISO ISO ISO ISO

11003-2 11007 11009 11014-1 11016 11019 11020 11021

ISO

11023

ISO

11024-1

ISO

11024-2

ISO

11025

ISO

11027

ISO ISO ISO ISO ISO ISO ISO ISO

11035 11036 11037 11040-1 11040-2 11040-3 11040-4 11040-5

ISO ISO

11041 11042-1

Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 2: A-Frame Coupler First Edition Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 3: Link Coupler First Edition Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 4: Bar Coupler Adhesives - Determination of Shear Behaviour of Structural Adhesives - Part 1: Torsion Test Method Using Butt-Bonded Hollow Cylinders Second Edition Adhesives - Determination of Shear Behaviour of Structural Adhesives - Part 2: Tensile-Test Method Using Thick Adherends Second Edition Petroleum Products and Lubricants - Determination of Rust-Prevention Characteristics of Lubricating Greases First Edition Petroleum Products and Lubricants - Determination of Water Washout Characteristics of Lubricating Greases First Edition Safety Data Sheet for Chemical Products - Part 1: Content and Order of Sections First Edition Oil of Star Anise, Chinese Type (Illicium Verum Hook. F.) First Edition Oil of Roots of Lovage (Levisticum Officinale Koch) First Edition Oil of Turpentine, Iberian Type (Pinus Pinaster Sol.) First Edition Essential Oils - Determination of Water Content - Karl Fischer Method First Edition Liquorice Extracts (Glycyrrhiza glabra L.) - Determination of Glycyrrhizic Acid Content - Method Using High-Performance Liquid Chromatography First Edition Essential Oils - General Guidance on Chromatographic Profiles - Part 1: Preparation of Chromatographic Profiles for Presentation in Standards First Edition Essential Oils - General Guidance on Chromatographic Profiles - Part 2: Utilization of Chromatographic Profiles of Samples of Essential Oils First Edition Oil of Cassia, Chinese Type - Determination of Trans-Cinnamaldehyde Content - Gas Chromatographic Method on Capillary Columns First Edition Pepper and Pepper Oleoresins - Determination of Pipeline Content - Method Using High-Performance Liquid Chromatography First Edition Sensory Analysis - Identification and Selection of Descriptors for Establishing a Sensory Profile by a Multidimensional Approach First Edition Sensory Analysis - Methodology - Texture Profile First Edition Sensory Analysis - General Guidance and Test Method for Assessment of the Colour of Foods First Edition Prefilled Syringes - Part 1: Glass Cylinders for Dental Local Anaesthetic Cartridges First Edition Prefilled Syringes - Part 2: Plungers and Discs for Dental Local Anaesthetic Cartridges First Edition Prefilled Syringes - Part 3: Aluminium Caps for Dental Local Anaesthetic Cartridges First Edition Prefilled syringes ù Part 4: Glass barrels for injectables Second Edition Prefilled Syringes - Part 5: Plungers for Injectables Second Edition Workplace Air - Determination of Particulate Arsenic and Arsenic Compounds and Arsenic Trioxide Vapour - Method by Hydride Generation and Atomic Absorption Spectrometry First Edition Gas Turbines - Exhaust Gas Emission - Part 1: Measurement and Evaluation First Edition

ISO ISO

11042-2 11043

ISO ISO ISO ISO ISO ISO ISO ISO

11047 11048 11050 11051 11052 11054 11055 11056

ISO ISO ISO ISO ISO ISO ISO ISO

11058 11064-1 11064-2 11064-3 11064-6 11064-7 11070 11072

ISO

11073-20101

ISO

11073-30200

ISO ISO

11073-30300 11074-1

ISO

11074-2

ISO

11074-4

ISO ISO ISO ISO

11074 CORR 1 11074 11075 11076

Gas Turbines - Exhaust Gas Emission - Part 2: Automated Emission Monitoring First Edition Oil of Basil, Methyl Chavicol Type (Ocimum Basilicum L.) First Edition Soil Quality - Determination of Cadmium, Cobalt, Copper, Lead, Manganese, Nickel and Zinc in Aqua Regia Extracts of Soil - Flame and Electrothermal Atomic Absorption Spectrometric Methods First Edition Soil Quality - Determination of Water-Soluble and Acid-Soluble Sulfate First Edition Wheat Flour and Durum Wheat Semolina - Determination of Impurities of Animal Origin First Edition Durum Wheat (Triticum Durum Desf.) - Specification First Edition Durum Wheat Flour and Semolina - Determination of Yellow Pigment Content First Edition Cutting tools - Designation of high-speed steel groups Second Edition Flywheels for Reciprocating Internal Combustion Engines - Installation Dimensions for Clutches First Edition Sensory Analysis - Methodology - Magnitude Estimation Method First Edition Geotextiles and Geotextile-Related Products - Determination of Water Permeability Characteristics Normal to the Plane, Without Load First Edition Ergonomic Design of Control Centres - Part 1: Principles for the Design of Control Centres First Edition Ergonomic Design of Control Centres - Part 2: Principles for the Arrangement of Control Suites First Edition Ergonomic Design of Control Centres - Part 3: Control Room Layout First Edition; Technical Corrigendum 1: 02/01/2002 Ergonomic design of control centres Part 6: Environmental requirements for control centres First Edition Ergonomic design of control centres Part 7: Principles for the evaluation of control centres First Edition Sterile Single-Use Intravascular Catheter Introducers First Edition Information Technology - Computer Graphics - Computer Graphics Reference Model First Edition Health informatics Point-of-care medical device communication Part 20101: Application profiles Base standard First Edition; CoCopyrighted by IEEE Health informatics Point-of-care medical device communication Part 30200: Transport profile Cable connected First Edition; CoCopyrighted by IEEE Health informatics Point-of-care medical device communication Part 30300: Transport profile Infrared wireless First Edition; CoCopyrighted by IEEE Soil Quality - Vocabulary Part 1: Terms and Definitions Relating to the Protection and Pollution of the Soil First Edition Soil Quality - Vocabulary - Part 2: Terms and Definitions Relating to Sampling Qualite Du Sol - Vocabulaire - Partie 2: Termes Et Definitions Relatifs A L'Echantillonnage First Edition Soil Quality - Vocabulary - Part 4: Terms and Definitions Related to the Rehabilitation of Soils and Sites Qualite Du Sol - Vocabulaire Partie 4: Termes Et Definitions Relatifs A La Rehabilitation Des Sols Et Sites First Edition Soil quality ù Vocabulary TECHNICAL CORRIGENDUM 1 QualitÚ du sol ù Vocabulaire RECTIFICATIF TECHNIQUE 1 First Edition; Technical Corrigendum 1: 9/15/2006 Soil quality ù Vocabulary QualitÚ du sol ù Vocabulaire First Edition Aircraft ù De-icing/anti-icing fluids ù ISO type I Second edition Aircraft Ground-based de-icing/antiicing methods with fluids Fourth Edition

ISO ISO ISO ISO

11077 11078 11082 11083

ISO

11084-1

ISO ISO ISO ISO ISO

11084-2 11086 11087 11088 11089

ISO

11090-1

ISO ISO

11090-2 11091

ISO ISO ISO ISO ISO ISO ISO ISO

11092 11093-1 11093-2 11093-3 11093-4 11093-5 11093-6 11093-7

ISO ISO

11093-8 11093-9

ISO ISO ISO

11094 11095 11096

ISO

11102-1

Aerospace - Self- Propelled De-Icing/ Anti-Icing Vehicles - Functional Requirements First Edition Aircraft ù De-icing/anti-icing fluids ù ISO types II, III and IV Second edition Certification Scheme for Welded Fabric for the Reinforcement of Concrete Structures First Edition Water Quality - Determination of Chromium(VI) - Spectrometric Method Using 1,5-Diphenyl- carbazide First Edition Graphic Technology - Register Systems for Photographic Materials, Foils and Paper - Part 1: Three-Pin Systems First Edition Graphic technology Register systems for photographic materials, foils and paper Part 2: Register pin systems for plate making First Edition Gas Turbines - Vocabulary First Edition Alpine ski-bindings Retention devices Requirements and test methods Second Edition Assembly, adjustment and inspection of an alpine ski/binding/boot (SûBûB) system Fourth Edition Rubber, Raw Synthetic - Determination of Anti-Degradants by High-Performance Liquid Chromatography First Edition Machine Tools - Test Conditions for Die Sinking Electro-Discharge Machines (EDM) - Terminology and Testing of Accuracy - Part 1: Single Column Machines (Cross Slide Table Type and Fixed Table Type) First Edition Machine Tools - Test Conditions for Die Sinking Electro-Discharge Machines (EDM) - Terminology and Testing of Accuracy - Part 2: Two Column Machines (Slide-Head Type and Cross-Slide Table Type) First Edition Construction Drawings - Landscape Drawing Practice First Edition Textiles - Physiological Effects - Measurement of Thermal and Water-Vapour Resistance under Steady-State Conditions (Sweating Guarded-Hotplate Test) First Edition; (CEN EN 31092:1993) Paper and Board - Testing of Cores - Part 1: Sampling First Edition Paper and Board - Testing of Cores - Part 2: Conditioning of Test Samples First Edition Paper and Board - Testing of Cores - Part 3: Determination of Moisture Content Using the Oven Drying Method First Edition Paper and Board - Testing of Cores - Part 4: Measurement of Dimensions First Edition Paper and Board - Testing of Cores - Part 5: Determination of Characteristics of Concentric Rotation First Edition Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method Second edition Paper and Board - Testing of Cores - Part 7: Determination of Flexural Modulus by the Three-Point Method First Edition Paper and Board - Testing of Cores - Part 8: Determination of Natural Frequency and Flexural Modulus by Experimental Modal Analysis First Edition Paper and board Testing of cores Part 9: Determination of flat crush resistance Second Edition Acoustics - Test Code for the Measurement of Airborne Noise Emitted by Power Lawn Mowers, Lawn Tractors, Lawn and Garden Tractors, Professional Mowers, and Lawn and Garden Tractors with Mowing Attachments First Edition Linear Calibration Using Reference Materials First Edition Road Vehicles Pedestrian Protection Impact Test Method for Pedestrian Thigh, Leg and Knee First Edition Reciprocating Internal Combustion Engines - Handle Starting Equipment - Part 1: Safety Requirements and Tests First Edition

ISO ISO ISO ISO ISO ISO ISO

11102-2 11103 11104 11105 11106-1 11106-2 11108

ISO

11110

ISO

11111-1

ISO

11111-2

ISO

11111-3

ISO

11111-4

ISO

11111-5

ISO

11111-6

ISO ISO

11111-7 11112

ISO

11114-1

ISO

11114-2

ISO

11114-3

ISO ISO ISO

11114-4 11116-1 11116-2

Reciprocating Internal Combustion Engines - Handle Starting Equipment - Part 2: Method of Testing the Angle of Disengagement First Edition Space Data and Information Transfer Systems - Radio Metric and Orbit Data First Edition Space Data and Information Transfer Systems - Time Code Formats First Edition Second Edition Small Craft - Ventilation of Petrol Engine and/or Petrol Tank Compartments Second Edition Photography - Slide Trays for Projectors - Part 1: Straight Slide Tray, Open Type (European Design) First Edition Photography - Slide Trays for Projectors - Part 2: Straight Slide Tray, Closed Type (Japanese Design) First Edition Information and Documentation - Archival Paper - Requirements for Permanence and Durability First Edition Winter-Sports Equipment - Test Devices for the Setting of the Functional Unit Ski/Boot/Binding - Requirements and Tests First Edition Textile machinery Safety requirements Part 1: Common requirements First Edition; ISO 11111-1 together with ISO 11111-2 , -3, -4, 5, -6, cancels and replaces ISO 11111:1995 Textile machinery Safety requirements Part 2: Spinning preparatory and spinning machines First Edition; ISO 11111-2 together with ISO 11111-1 , -3, -4, -5, -6, and -7, cancels and replaces ISO 11111:1995 Textile machinery Safety requirements Part 3: Nonwoven machinery First Edition; ISO 11111-3 together with ISO 11111-1 , -2, -4, 5, -6, and -7, cancels and replaces ISO 11111:1995 Textile machinery Safety requirements Part 4: Yarn processing, cordage and rope manufacturing machinery First Edition; ISO 11111-3 together with ISO 11111-1 , -2, -3, -5, -6, and -7, cancels and replaces ISO 11111:1995 Textile machinery Safety requirements Part 5: Preparatory machinery to weaving and knitting MatÚriel pour l┤industrie textile First Edition; ISO 11111-5 together with ISO 11111-1 , -2, -3, -4, -6, and -7, cancels and replaces ISO 11111:1995 Textile machinery Safety requirements Part 6: Fabric manufacturing machinery First Edition; ISO 11111-6 together with ISO 11111-1 , -2, -3, -4, -5, and -7, cancels and replaces ISO 11111:1995 Textile machinery Safety requirements Part 7: Dyeing and finishing machinery First edition; ISO 11111-7 together with ISO 11111-1, 2, -3, -4, -5, and -6 Cancels and Replaces ISO 11111:1995 Earth-Moving Machinery - Operator┤s Seat - Dimensions and Requirements First Edition; Amendment 1: 03/01/2001 Transportable Gas Cylinders - Compatibilty of Cylinder and Valve Materials with Gas Contents - Part 1: Metallic Materials First Edition; Corrected and Reprinted 08/01/1999 Transportable Gas Cylinders - Compatibilty of Cylinder and Valve Materials with Gas Contents - Part 2: Non-Metallic Materials First Edition Transportable Gas Cylinders - Compatibilty of Cylinder and Valve Materials with Gas Contents - Part 3: Autogenous Ignition Test in Oxygen Atmosphere First Edition; Corrected and Reprinted 08/01/1999 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement First Edition Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 1: Specification First Edition Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 2: Inspection Gauges First Edition

ISO ISO

11117 11118

ISO

11119-1

ISO

11119-2

ISO

11119-3

ISO

11120

ISO

11124-1

ISO

11124-2

ISO

11124-3

ISO

11124-4

ISO

11125-1

ISO

11125-2

ISO

11125-3

ISO

11125-4

ISO

11125-5

ISO

11125-6

ISO

11125-7

ISO

11126-1

Gas Cylinders - Valve Protection Caps and Valve Guards for Industrial and Medical Gas Cylinders - Design, Construction and Tests First Edition Gas Cylinders - Non-Refillable Metallic Gas Cylinders - Specification and Test Methods First Edition Gas Cylinders of Composite Construction - Specification and Test Methods - Part 1: Hoop Wrapped Composite Gas Cylinders First Edition Gas Cylinders of Composite Construction - Specification and Test Methods - Part 2: Fully Wrapped Fibre Reinforced Composite Gas Cylinders With Load-Sharing Metal Liners Gas Cylinders of Composite Construction - Specification and Test Methods - Part 3: Fully Wrapped Fibre Reinforced Composite Gas Cylinders with Non-Load-Sharing Metallic or Non-Metallic Liners First Edition Gas Cylinders - Refillable Seamless Steel Tubes of Water Capacity between 150 I and 3 000 I - Design, Construction and Testing First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 1: General Introduction and Classification First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 2: Chilled-Iron Grit First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 3: High-Carbon Cast-Steel Shot and Grit First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 4: Low-Carbon Cast-Steel Shot First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 1: Sampling First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 2: Determination of Partical Size Distribution First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 3: Determination of Hardness First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 4: Determination of Apparent Density First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 5: Determination of Percentage Defective Particles and of Microstructure First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 6: Determination of Foreign Matter First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 7: Determination of Moisture First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 1: General Introduction and Classification First Edition; Corrigendum 1-1997, Corrigendum 2-1997

ISO

11126-3

ISO

11126-4

ISO

11126-5

ISO

11126-6

ISO

11126-7

ISO

11126-8

ISO

11126-9

ISO

11126-10

ISO

11127-1

ISO

11127-2

ISO

11127-3

ISO

11127-4

ISO

11127-5

ISO

11127-6

ISO ISO

11127-7 11130

ISO

11135

ISO

11135-1

Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 3: Copper Refinery Slag First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 4: Coal Furnace Slag First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 5: Nickel Refinery Slag First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 6: Iron Furnace Slag First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning Abrasives - Part 7: Fused Aluminium Oxide First Edition; Technical Corrigendum: 02-15-1999 Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 8: Olivine Sand First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning Abrasives - Part 9: Staurolite First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning Abrasives - Part 10: Almandite Garnet First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 1: Sampling First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 2: Determination of Particle Distribution First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 3: Determination of Apparent Density First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 4: Assessment of Hardness by a Glass Slide Test First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 5: Determination of Moisture First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 6: Determination of Water- Soluble Contaminants by Conductivity Measurement First Edition Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 7: Determination of Water- Soluble Chlorides First Edition Corrosion of Metals and Alloys - Alternate Immersion Test in Salt Solution First Edition Medical Devices - Validation and Routine Control of Ethylene Oxide Sterilization First Edition; Corrigendum 1: 1994 [Refer To: AAMI TIR28] Sterilization of health care products ù Ethylene oxide ù Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices First Edition

ISO

11137-1

ISO

11137-2

ISO ISO

11137-3 11138-1

ISO

11138-2

ISO

11138-3

ISO

11138-4

ISO ISO ISO

11138-5 11140-1 11140-2

ISO

11140-3

ISO

11140-4

ISO

11140-5

ISO ISO ISO

11142 11143 11144

ISO

11145

ISO

11146-1

ISO

11146-2

ISO

11151-1

Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices First Edition; Together with ISO 11137-2 and ISO 11137-3 supersedes ISO 11137:1995 Sterilization of health care products Radiation Part 2: Establishing the sterilization dose First Edition; Together with ISO 11137-1 and ISO 11137-3 supersedes ISO 11137:1995 Sterilization of health care products Radiation Part 3: Guidance on dosimetric aspects First Edition; Together with ISO 11137-1 and ISO 11137-2 supersedes ISO 11137:1995 Sterilization of health care products Biological indicators Part 1: General requirements Second Edition Sterilization of health care products Biological indicators Part 2: Biological indicators for ethylene oxide sterilization processes Second Edition Sterilization of health care products Biological indicators Part 3: Biological indicators for moist heat sterilization processes Second Edition Sterilization of health care products Biological indicators Part 4: Biological indicators for dry heat sterilization processes First Edition Sterilization of health care products Biological indicators Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes First Edition Sterilization of health care products - Chemical indicators Part 1: General requirements Second Edition Sterilization of Health Care Products - Chemical Indicators - Part 2: Test Equipment and Methods First Edition Sterilization of health care products ù Chemical indicators ù Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test Second Edition Sterilization of health care products ù Chemical indicators ù Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration Second Edition Sterilization of health care products ù Chemical indicators ù Part 5: Class 2 indicators for Bowie and Dicktype air removal tests Second Edition Micrographics Colour microfilm Application of the exposure technique to prepare line originals and continuous-tone originals First Edition Dental Equipment - Amalgam Separators First Edition: Corrigendum 6/15/2002 Dental Equipment - Connections for Supply and Waste Lines First Edition Optics and photonics Lasers and laser-related equipment Vocabulary and symbols Optique et photonique Lasers et Úquipements associÚs aux lasers Vocabulaire et symboles Third Edition Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 1: Stigmatic and simple astigmatic beams First Edition; Cancels and Replaces 11146:1999 Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 2: General astigmatic beams First edition Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges First Edition

ISO ISO

11151-2 11157

ISO

11158

ISO

11159

ISO

11160-1

ISO ISO ISO ISO ISO ISO ISO

11160-2 11161 11162 11163 11164 11165 11168

ISO ISO ISO

11169 11170 11171

ISO

11172-1

ISO

11172-2

ISO

11172-3

ISO

11172-4 CORR 1

ISO ISO

11172-4 11173

ISO

11174

Lasers and Laser-Related Equipment - Standard Optical Components - Part 2: Components for the Infrared Spectral Ranges First Edition Road vehicles - Brake lining assemblies - Inertia dynamometer test method Second Edition Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HH, HL, HM, HR, HV and HG First Edition Information Technology - Office Equipment - Minimum Information to Be Included in Specification Sheets - Copying Machines Second Edition; Corrected and Reprinted 03/01/1997 Information Technology - Office Equipment - Minimum Information to Be Included in Specification Sheets - Printers - Part 1: Class 1 and Class 2 Printers First Edition Information Technology - Office Equipment - Minimum Information to Be Included in Specification Sheets - Printers - Part 2: Class 3 and Class 4 Printers First Edition Safety of machinery ù Integrated manufacturing systems ù Basic requirements SECOND EDITION Peppercorns (Piper Nigrum L.) in Brine - Specification and Test Methods First Edition Dried Sweet Basil (Ocimum Basilicum L.) - Specification First Edition Dried Rosemary (Rosmarinus Officinalis L.) - Specification First Edition Dried Sage (Salvia Officinalis L.) - Specification First Edition Socket Wrenches for Spark- and Glow-Plugs First Edition Machinery for Forestry - Wheeled Special Machines - Vocabulary, Performance Test Methods and Criteria for Brake Systems First Edition Hydraulic fluid power Filter elements Sequence of tests for verifying performance characteristics Second edition Hydraulic Fluid Power - Calibration of Automatic Particle Counters for Liquids First Edition; Corrigendum 1: 10/1/2001 Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part 1: Systems First Edition; CEN EN ISO/IEC 11172-1: 1995; AS/NZS 4230.1: 1994; Corrigendum 1: 1996; Corrigendum 2: 1999 Information technology Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s Part 2: Video First Edition; Corrigendum 1: 4/15/1996; Corrigendum 2: 12/1/1999; Corrigendum 3: 11/1/2003; Corrigendum 4: 08/15/2006 Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part 3: Audio First Edition; CEN EN ISO/IEC 11172-3 1995; AS/NZS 4230.3: 1994; Corrigendum 1: 1996 Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part 4: Compliance Testing Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part 4: Compliance Testing First Edition Thermoplastics Pipes - Determination of Resistance to External Blows - Staircase Method First Edition Workplace Air - Determination of Particulate Cadmium and Cadmium Compounds - Flame and Electrothermal Atomic Absorption Spectrometric Method First Edition

ISO ISO ISO

11178 11179-1 11179-2

ISO ISO ISO ISO ISO ISO ISO

11179-3 CORR 1 11179-3 11179-4 11179-5 11179-6 11191 11192

ISO

11193-1 AMD 1

ISO

11193-1 CORR 1

ISO

11193-1

ISO ISO ISO ISO ISO ISO

11193-2 11195 11197 11199-1 11199-2 11199-3

ISO

11200

ISO

11201

ISO

11202

ISO

11203

Star Anise (Llicium verum Hook. f.) - Specification First Edition Information technology Metadata registries (MDR) Part 1: Framework Second Edition Information technology Metadata registries (MDR) Part 2: Classification Second Edition Information technology ù Metadata registries (MDR) ù Part 3: Registry metamodel and basic attributes TECHNICAL CORRIGENDUM 1 Second Edition Information Technology - Metadata Registries (MDR) - Part 3: Registry Metamodel and Basic Attributes Second Edition Information technology Metadata registries (MDR) Part 4: Formulation of data definitions Second Edition Information technology Metadata registries (MDR) Part 5: Naming and identification principles Second Edition Information technology Metadata registries (MDR) Part 6: Registration Second Edition Gas Cylinders - 25E Taper Thread for Connection of Valves to Gas Cylinders - Inspection Gauges First Edition Small craft - Graphical symbols First Edition Single-use medical examination gloves ù Part 1: Specification for gloves made from rubber latex or rubber solution AMENDMENT 1 First Edition Single-use medical examination gloves ù Part 1: Specification for gloves made from rubber latex or rubber solution TECHNICAL CORRIGENDUM 1 First Edition Single-use medical examination gloves ù Part 1: Specification for gloves made from rubber latex or rubber solution First Edition Single-use medical examination gloves Part 2: Specification for gloves made from poly(vinyl chloride) First Edition; Cancels and Replaces ISO 11193:1994 Gas Mixers for Medical Use - Stand-Alone Gas Mixers First Edition Medical supply units Second Edition Walking Aids Manipulated by Both Arms - Requirements and Test Methods - Part 1: Walking Frames First Edition Walking Aids Manipulated by Both Arms - Requirements and Test Methods - Part 2: Rollators Second edition Walking aids manipulated by both arms Requirements and test methods Part 3: Walking tables First Edition Acoustics - Noise Emitted by Machinery and Equipment - Guidelines for the Use of Basic Standards for the Determination of Emission Sound Pressure Levels at a Work Station and at Other Specified Positions First Edition; CEN EN ISO 11200: 1995; Corrigendum 1 02/01/1997 Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at Other Specified Positions - Engineering Method in an Essentially Free Field Over a Reflecting Plane First Edition; Replaces ISO 6081; CEN EN ISO 11201-95; Corrigendum 1 02/15/1997 Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at Other Specified Positions - Survey Method in Situ First Edition (CEN EN ISO 11202: 1995) Acoustics - Noise Emitted by Machinery and Equipment - Determination of Emission Sound Pressure Levels at a Work Station and at Other Specified Positions from the Sound Power Level (CEN EN ISO 11204: 1995)

ISO

11204

ISO

11205

ISO

11210

ISO

11212-1

ISO

11212-2

ISO

11212-3

ISO ISO ISO

11212-4 11213 11214

ISO ISO ISO ISO ISO

11215 11216 11217 11218 11222

ISO

11223

ISO ISO ISO ISO ISO ISO ISO

11224 11226 11228-1 11228-2 11228-3 11234 11235

ISO

11236

Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at Other Specified Positions - Method Requiring Environmental Corrections First Edition; CEN EN ISO 11204:1995; Corrigendum 1 02/15/1997 Acoustics Noise emitted by machinery and equipment Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity First Edition Determination of Platinum Jewellery Alloys - Gravimetric Method After Precipitation of Diammonium Hexachloroplatinate First Edition Starch and Derived Products - Heavy Metals Content - Part 1: Determination of Arsenic Content by Atomic Absorption Spectrometry First Edition Starch and Derived Products - Heavy Metals Content - Part 2: Determination of Mercury Content by Atomic Absorption Spectrometry First Edition Starch and Derived Products - Heavy Metals Content - Part 3: Determination of Lead Content by Atomic Absorption Spectrometry with Electrothermal Atomization First Edition Starch and Derived Products - Heavy Metals Content - Part 4: Determination of Cadmium Content by Atomic Absorption Spectrometry with Electrothermal Atomization First Edition; Corrigendum 1 09-15-1997 Modified Starch - Determination of Acetyl Content - Enzymatic Method First Edition; (EN ISO 11213:1995) Modified Starch - Determination of Carboxyl Group Content of Oxidized Starch First Edition CEN EN ISO 11 214: 1996 Modified Starch - Determination of Adipic Acid Content of Acetylated Di-Starch Adipates - Gas Chromaographic Method First Edition Modified Starch - Determination of Content of Carboxymethyl Groups in Carboxymethyl Starch First Edition Aerospace - Hydraulic System Fluid Contamination - Location of Sampling Points and Criteria for Sampling First Edition Aerospace - Cleanliness Classification for Hydraulic Fluids First Edition Air quality Determination of the uncertainty of the time average of air quality measurements First Edition Petroleum and liquid petroleum products Direct static measurements Measurement of content of vertical storage tanks by hydrostatic tank gauging First Edition Textiles - Web Formation and Bonding in Nonwovens - Vocabulary Textiles - Formation et Liage du Voile Dans les Nontisses Vocabulaire Second Edition Ergonomics Evaluation of static working postures First Edition; Technical Corrigendum 1: 05/01/2006 Ergonomics Manual handling Part 1: Lifting and carrying First Edition Ergonomics ù Manual handling ù Part 2: Pushing and pulling First Edition Ergonomics ù Manual handling ù Part 3: Handling of low loads at high frequency First Edition Rubber Compounding Ingredients - Carbon Black (Pelletized) - Determination of Dust Content First Edition Rubber Compounding Ingredients - Sulfenamide Accelerators - Test Methods First Edition Rubber compounding ingredients - p-Phenylenediamine (PPD) antidegradants - Test methods First Edition; Technical Corrigendum 1: 02/15/2006

Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based fluid applications First Edition Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 2: Waterbased fluid applications First Edition Aircraft - Aircraft Engine Transport Devices First Edition Aircraft - Pressure Equalization Requirements for Cargo Containers First Edition Cycles - Luggage Carriers for Bicycles - Concepts, Classification and Testing First Edition Plastics - Thermosetting Moulding Materials - Evaluation of Short-Term Performance at Elevated Temperatures First Edition Lasers and Laser-Related Equipment - Laser Device - Minimum Requirements for Documentation Second Edition Lasers and Laser-Related Equipment - Determination of Laser-Induced Damage Threshold of Optical Surfaces - Part 1: 1-on-1 Test First Edition Lasers and Laser-Related Equipment - Determination of Laser-Induced Damage Threshold of Optical Surfaces - Part 2: S-on-1 Test First Edition Lasers and laser-related equipment Determination of laser-induced damage threshold of optical surfaces Part 3: Assurance of laser power (energy) handling capabilities First Edition Iron Ore Pellets - Determination of Clustering of Feedstock for Direct Reduction by Gas Reforming Processes First Edition Iron Ores - Determination of Disintegration and Metallization of Feedstock for Direct Reduction by Gas Reforming Processes First Edition Iron Ores - Determination of Reducibility and Metallization of Feedstock for Direct reduction by Gas Reforming Processes First Edition Soil Quality - Simplified Soil Description Qualite Du Sol - Decription Simplifiee Du Sol First Edition Soil Quality - Determination of Effective Cation Exchange Capacity and Base Saturation Level Using Barium Chloride Solution First Edition; Corrigendum 1: 1996 Soil Quality - Determination of Total Nitrogen - Modified Kjeldahl Method First Edition Soil quality Determination of cyanide First Edition Soil Quality - Determination of Phosphorus - Spectrometric Determination of Phosphorus Soluble in Sodium Hydrogen Carbonate Solution First Edition Soil quality Determination of herbicides Method using HPLC with UV-detection First edition Soil Quality - Determination of the Specific Electrical Conductivity First Edition; Corrigendum 1: 1996

ISO

11237-1

ISO ISO ISO ISO ISO ISO

11237-2 11241 11242 11243 11248 11252

ISO

11254-1

ISO

11254-2

ISO ISO

11254-3 11256

ISO

11257

ISO ISO

11258 11259

ISO ISO ISO

11260 11261 11262

ISO ISO ISO

11263 11264 11265

ISO ISO

11266 11267

ISO

11268-1

Soil Quality - Guidance on Laboratory Testing for Biodegradation of Organic Chemicals in Soil Under Aerobic Conditions First Edition Soil Quality - Inhibition of Reproduction of Collembola (Folsomia Candida) by Soil Pollutants First Edition Soil Quality - Effects of Pollutants on Earthworms (Eisenia Fetida) - Part 1: Determination of Acute Toxicity Using Artificial Soil Substrate First Edition

ISO

11268-2

Soil Quality - Effects of Pollutants on Earthworms (Eisenia Fetida) - Part 2: Determination of Effects on Reproduction First Edition

ISO

11268-3

ISO

11269-1

ISO ISO ISO ISO

11269-2 11271 11272 11274

ISO ISO

11275 11276

ISO ISO ISO ISO

11277 11285 11286 11289

ISO

11290-1

ISO

11290-2

ISO

11292

ISO ISO

11294 11303

Soil Quality - Effects of Pollutants on Earthworms - Part 3: Guidance on the Determination of Effects in Field Situations First Edition Soil Quality - Determination of the Effects of Pollutants on Soil Flora - Part 1: Method for the Measurement of Inhibition of Root Growth First Edition Soil quality Determination of the effects of pollutants on soil flora Part 2: Effects of chemicals on the emergence and growth of higher plants Second Edition Soil Quality - Determination of Redox Potential - Field Method First Edition Soil Quality - Determination of Dry Bulk Density First Edition Soil Quality - Determination of the Water-Retention Characteristics - Laboratory Methods First Edition Soil quality Determination of unsaturated hydraulic conductivity and water-retention characteristic Wind┤s evaporation method First Edition Soil Quality - Determination of Pore Water Pressure - Tensiometer Method First Edition (BS 7755: SEC 5.1: 1996) Soil Quality - Determination of Particle Size Distribution in Mineral Soil Material - Method by Sieving and Sedimentation First Edition; Technical Corrigendum 1: 03/01/2002 Milk Determination of lactulose content Enzymatic method First Edition Tea Classification of grades by particle size analysis Second Edition Heat-Processed Foods in Hermetically Sealed Containers - Determination of pH First Edition Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Detection and Enumeration of Listeria Monocytogenes Part 1: Detection Method First Edition; Amendment 1: 10/15/2004 Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Detection and Enumeration of Listeria Monocytogenes Part 2: Enumeration Method First Edition; Amendment 1: 10/15/2004 Instant Coffee - Determination of Free and Total Carbohydrate Contents - Method Using High-Performance Anion-Exchange Chromatography First Edition; Corrected and Reprinted 02-01-1997 Roasted Ground Coffee - Determination of Moisture Content - Method by Determination of Loss in Mass at 103 Degrees C (Routine Method) First Edition Corrosion of Metals and Alloys - Guidelines for Selection of Protection Methods Against Atmospheric Corrosion First Edition

ISO

11306

Corrosion of Metals and Alloys - Guidelines for Exposing and Evaluating Metals and Alloys in Surface Sea Water First Edition

ISO ISO ISO

11312 11315-1 11315-2

ISO

11318

Cardiac Defibrillators - Connector Assembly DF-1 for Implantable Defibrillators - Dimensional and Test Requirements Second Edition

ISO

11319

Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording First Edition

Photography - Sheets of Sensitized Material for the Pre-Press Industry - Dimensions and Related Requirements Second Edition Photography - Projection in indoor Rooms - Part 1: Screen Illumination Test for Still Projectors First Edition Photography - Projection in indoor Rooms - Part 2: Screen Illuminance Test for Still and Video Projection First Edition

ISO ISO ISO

11321 11323 11329

ISO

11334-1

ISO ISO

11334-4 11337

ISO

11338-1

ISO ISO

11338-2 11339

ISO

11341

ISO

11342

ISO

11343

ISO ISO ISO

11344 11345 11346

ISO

11348-1

ISO

11348-2

ISO ISO ISO

11348-3 11357-1 11357-2

ISO ISO

11357-3 11357-4

Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DATA/DAT Format First Edition Iron Ore and Direct Reduced Iron - Vocabulary Second Edition Hydrometric Determinations - Measurement of Suspended Sediment Transport in Tidal Channels Second Edition Assistive products for walking manipulated by one arm ù Requirements and test methods ù Part 1: Elbow crutches Second Edition Walking Aids Manipulated by One Arm - Requirements and Test Methods - Part 4: Walking Sticks with Three or More Legs First Edition Plastics Polyamides Determination of e-caprolactam and w-laurolactam by gas chromatography First Edition Stationary source emissions Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 1: Sampling First Edition Stationary source emissions Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 2: Sample preparation, clean-up and determination First Edition Adhesives - T-Peel Test for Flexible-to-Flexible Bonded Assemblies Second Edition Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation Second Edition Mechanical Vibration - Methods and Criteria for the Mechanical Balancing of Flexible Rotors Second Edition; Corrigendum 1: 06-012000 Adhesives - Determination of Dynamic Resistance to Cleavage of High Strength Adhesive Bonds Under Impact Conditions - Wedge Impact Method Second Edition Rubber, raw synthetic Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography First Edition Rubber Assessment of carbon black and carbon black/silica dispersion Rapid comparative methods Second Edition Rubber, vulcanized or thermoplastic Estimation of life-time and maximum temperature of use Second Edition Water Quality - Determination of the Inhibitory Effect of Water Samples on the Light Emission of Vibrio Fischeri (Luminescent Bacteria Test) - Part 1: Method Using Freshly Prepared Bacteria First Edition Water Quality - Determination of the Inhibitory Effect of Water Samples on the Light Emission of Vibrio Fischeri (Luminescent Bacteria Test) - Part 2: Method Using Liquid-Dried Bacteria First Edition Water Quality - Determination of the Inhibitory Effect of Water Samples on the Light Emission of Vibrio Fischeri (Luminescent Bacteria Test) - Part 3: Method Using Freeze-Dried Bacteria First Edition Plastics - Differential Scanning Calorimetry (DSC) - Part 1: General Principles First Edition Plastics - Differential Scanning Calorimetry (DSC) - Part 2: Determination of Glass Transition Temperature First Edition Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization First Edition; Amendment 1: 07/2005 Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity First Edition

ISO

11357-5

ISO ISO ISO ISO ISO ISO

11357-6 AMD 1 11357-6 11357-7 11358 11358-2 11359-1

ISO ISO

11359-2 11359-3

ISO ISO ISO ISO ISO ISO ISO ISO ISO

11369 11372 11375 11377 11378-1 11378-2 11379 11380 11381

ISO

11393-1

ISO ISO

11393-2 11393-3

ISO

11393-4

ISO

11393-5

ISO ISO

11393-6 11399

ISO

11400

Plastics - Differential Scanning Calorimetry (DSC) - Part 5: Determination of Characteristic Reaction-Curve Temperatures and Times, Enthalpy of Reaction and Degree of Conversion First Edition Plastics ù Differential scanning calorimetry (DSC) ù Part 6: Determination of oxidation induction time AMENDMENT 1 First Edition Plastics - Differential Scanning Calorimetry (DSC) - Part 6: Determination of Oxidation Induction Time First Edition Plastics - Differential Scanning Calorimetry (DSC) - Part 7: Determination of Crystallization Kinetics First Edition Plastics - Thermogravimetry (TG) of Polymers - General Principles First Edition Plastics Thermogravimetry (TG) of polymers Part 2: Determination of activation energy First Edition Plastics - Thermomechanical Analysis (TMA) - Part 1: General Principles First Edition Plastics - Thermomechanical Analysis (TMA) - Part 2: Determination of Coefficient of Linear Thermal Expansion and Glass Transition Temperature First Edition Plastics - Thermomechanical Analysis (TMA) - Part 3: Determination of Penetration Temperature First Edition Water Quality - Determination of Selected Plant Treatment Agents - Method Using High Performance Liquid Chromatography with UV Detection After Solid-Liquid Extraction First Edition Gas cylinders Cylinders for dissolved acetylene Inspection at time of filling Second Edition Building Construction Machinery and Equipment - Terms and Definitions First Edition Textile Floor Coverings - Floor Soiling - Test Site Set-Up and Soiling Evaluation First Edition Textile Floor Coverings- Laboratory Soiling Tests - Part 1: Kappasoil Test First Edition Textile Floor Coverings - Laboratory Soiling Tests - Part 2: Drum Test First Edition Textile Floor Coverings - Laboratory Cleaning Procedure Using Spray Extraction First Edition Optics and Optical Instruments - Ophthalmic Optics - Formers First Edition Optics and Optical Instruments - Ophthalmic Optics - Screw Threads First Edition Protective Clothing for Users of Hand-Held Chain-Saws - Part 1: Test Rig Driven by a Flywheel for Testing Resistance to Cutting by a Chain-Saw First Edition Protective Clothing for Users of Hand-Held Chain-Saws - Part 2: Test Methods and Performance Requirements for Leg Protectors First Edition Protective Clothing for Users of Hand-Held Chain-Saws - Part 3: Test Methods for Footwear First Edition Protective clothing for users of hand-held chain-saws Part 4: Test methods and performance requirements for rotective gloves First Edition Protective Clothing for Users of Hand-Held Chain-Saws - Part 5: Test Methods and Performance Requirements for Protective Gaiters First Edition Protective clothing for users of hand-held chain-saws ù Part 6: Test methods and performance requirements for upper body protectors First Edition Ergonomics of the Thermal Environment - Principles and Application of Relevant International Standards First Edition Nickel, Ferronickel and Nickel Alloys - Determination of Phosphorus Content - Phosphovanadomolybdate Molecular Absorption Spectrometric Method First Edition

ISO ISO ISO

11401 11402 11403-1

Plastics - Phenolic Resins - Separation by Liquid Chromatography First Edition Phenolic, amino and condensation resins Determination of free- formaldehyde content Second Edition; Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 1: Mechanical Properties Second Edition

ISO

11403-2

Plastics Acquisition and presentation of comparable multipoint data Part 2: Thermal and processing properties Second Edition

ISO

11403-3

ISO ISO

11404 FDIS 11404

ISO

11406

ISO ISO

11407 11408

Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 3: Environmental Influences on Properties First Edition Information Technology - Programming Languages, Their Environments and System Software Interfaces - Language-Independent Datatypes First Edition Information technology ù General- Purpose Datatypes (GPD) Commercial Road Vehicles - Mechanical Coupling between Towing Vehicles with Rear-Mounted Coupling and Drawbar Trailers Interchangeability Second Edition; Corrigendum 1: 1/15/2005 Commercial road vehicles Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers Interchangeability Second Edition Chemical Conversion Coatings - Black Oxide Coating on Iron and Steel - Specification and Test Methods First Edition

ISO ISO ISO

11409 11411 11412

ISO

11413

ISO ISO ISO ISO ISO

11414 11415 11416 11418-1 11418-2

ISO ISO ISO

11418-3 11418-4 11418-5

ISO ISO

11418-7 11421

Plastics - Phenolic Resins - Determination of Heats and Temperatures of Reaction by Differential Scanning Calorimetry First Edition Information Technology - Representation for Human Communication of State Transition of Software First Edition Carbonaceous Materials for the Production of Aluminium - Calcined Coke - Determination of Water Content First Edition Plastics Pipes and Fittings - Preparation of Test Piece Assemblies between a Polyethylene (PE) Pipe and an Electrofusion Fitting First Edition Plastics Pipes and Fittings - Preparation of Polyethylene (PE) Pipe/Pipe or Pipe/ Fitting Test Piece Assemblies by Butt Fusion First Edition Tools for Pressing - Die Sets First Edition Tennis Rackets - Racket Components and Physical Parameters First Edition Containers and accessories for pharmaceutical preparations Part 1: Drop-dispensing glass bottles Second edition Containers and accessories for pharmaceutical preparations Part 2: Screw-neck glass bottles for syrups Second edition Containers and accessories for pharmaceutical preparations Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms Second edition Containers and accessories for pharmaceutical preparations Part 4: Tablet glass bottles Second edition Containers and Accessories for Pharmaceutical Preparations - Part 5: Dropper Assemblies First Edition Containers and Accessories for Pharmaceutical Preparations - Part 7: Screw-Neck Vials Made of Glass Tubing for Liquid Dosage Forms First Edition Optics and Optical Instruments - Accuracy of Optical Transfer Function (OTF) Measurement First Edition;

ISO

11423-1

Water Quality - Determination of Benzene and Some Derivatives - Part 1: Head-Space Gas Chromatographic Method First Edition

ISO ISO ISO ISO

11423-2 11424 11425 11426

ISO ISO ISO

11427 11428 11429

ISO ISO

11431 11432

Water Quality - Determination of Benzene and Some Derivatives - Part 2: Method Using Extration and Gas Chromatography First Edition Rubber Hoses and Tubing for Air and Vacuum Systems for Internal- Combustion Engines - Specification First Edition Rubber Hoses and Hose Assemblies for Automobile Power- Steering Systems - Specification First Edition Determination of Gold in Gold Jewellery Alloys - Cupellation Method (Fire Assay) Second Edition Determination of Silver in Silver Jewellery Alloys - Volumetric (Potentiometric) Method Using Potassium Bromide (CEN EN 31427:1994); (DINE EN 31427:1995) First Edition; Corrigendum 1: 1994 Ergonomics - Visual Danger Signals - General Requirements, Design and Testing First Edition Ergonomics - System of Auditory and Visual Danger and Information Signals First Edition Building Construction - Jointing Products - Determination of Adhesion/Cohesion Properties of Sealants After Exposure to Heat, Water and Artificial Light Through Glass Second Edition Building construction - Sealants - Determination of resistance to compression Second Edition

ISO

11433

Nickel Alloys - Determination of Titanium Content - Diantipyrylmethane Molecular Absorption Spectrometric Method First Edition

ISO

11435

Nickel alloys Determination of molybdenum Inductively coupled plasma atomic emission spectrometric method First Edition

ISO

11436

ISO

11437-1

ISO

11437-2

ISO

11438-1

ISO

11438-2

ISO

11438-3

ISO

11438-4

ISO

11438-5

ISO

11438-6

ISO

11438-7

Nickel and Nickel Alloys - Determination of Total Boron Content - Curcumin Molecular Absorption Spectrometric Method First Edition Nickel Alloys - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 1: General Requirements and Sample Dissolution First Edition Nickel Alloys - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 2: Determination of Lead Content First Edition Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 1: General Requirements and Sample Dissolution First Edition Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 2: Determination of Lead Content First Edition Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 3: Determination of Antimony Content First Edition Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 4: Determination of Tin Content First Edition Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 5: Determination of Tellurium Content First Edition Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 6: Determination of Thallium Content First Edition Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 7: Determination of Silver Content First Edition

ISO

11438-8

ISO

11439

ISO

11441

ISO ISO

11442 11443

ISO ISO ISO ISO

11446 11448 11449 11450

ISO

11451-1

ISO

11451-2

ISO

11451-3

ISO

11451-4

ISO

11452-1

ISO

11452-2

ISO

11452-3

ISO

11452-4

ISO

11452-5

ISO

11452-7

ISO

11452-8

Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 8: Determination of Indium Content First Edition Gas Cylinders - High Pressure Cylinders for the On-Board Storage of Natural Gas as a Fuel for Automotive Vehicles First Edition Lead Sulfide Concentrates - Determination of Lead Content - Back Titration of EDTA After Precipitation of Lead Sulfate First Edition; (Corrected and Reprinted - 1995) (SAA AS 4030.2: 1996) Technical product documentation Document management First Edition; Replaces ISO 11442-1 thru ISO 11442-5 and ISO/TR 10623 Plastics - Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers Second edition Road vehicles Connectors for the electrical connection of towing and towed vehicles 13-pole connectors for vehicles with 12 V nominal supply voltage Third Edition Powered Shredders and Chippers - Definitions, Safety Requirements and Test Procedures First Edition Walk-Behind Powered Rotary Tillers - Definitions, Safety Requirements and Test Procedures First Edition Equipment for Harvesting and Conservation - Round Balers - Terminology and Commercial Specifications First Edition Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology Third edition Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle radiation sources Third edition Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation Second Edition Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk current injection (BCI) Second Editon Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology Third Edition Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure Second Edition Road Vehicles - Component Test Methods for Electrical Disturbances from Narrowband Radiated Electromagnetic Energy - Part 3: Transverse Electromagnetic (TEM) Cell Second Edition Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk current injection (BCI) Third edition Road Vehicles - Component Test Methods for Electrical Disturbances from Narrowband Radiated Electromagnetic Energy - Part 5: Stripline Second Edition Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 7: Direct radio frequency (RF) power injection Second Edition Road vehicles ù Component test methods for electrical disturbances from narrowband radiated electromagnetic energy ù Part 8: Immunity to magnetic fields First Edition

ISO ISO ISO ISO ISO

11453 11455 11458 11459 11460

ISO ISO ISO ISO

11461 11462-1 11463 11464

ISO ISO ISO ISO ISO

11465 11466 11468 11469 11471

ISO ISO ISO ISO ISO

11474 11475 11476 11480 11482

ISO ISO ISO

11483 11484 11486

ISO ISO

11489 11490

ISO ISO ISO ISO

11496 11497 11498 11499

Statistical Interpretation of Data - Tests and Confidence Intervals Relating to Proportions First Edition; Technical Corrigendum 1: 0901-1999 Raw Optical Glass - Determination of Birefringence First Edition Information Technology - Microprocessor Systems - VICbus - Inter-Crate Cable Bus First Edition; Amendment 1 07-2000 Iron Ores - Certified Reference Materials - Preparation and Certification for Use in Chemical Analysis First Edition Two-wheeled motorcycles ù Positioning of lighting and light-signalling devices Second edition Soil Quality - Determination of Soil Water Content as a Volume Fraction Using Coring Sleeves - Gravimetric Method First Edition Guidelines for Implementation of Statistical Process Control (SPC) - Part 1: Elements of SPC First Edition Corrosion of Metals and Alloys - Evaluation of Pitting Corrosion First Edition Soil quality Pretreatment of samples for physico-chemical analysis Second Edition Soil Quality - Determination of Dry Matter and Water Content on a Mass Basis - Gravimetric Method First Edition; Corrigendum 1: 1994 Soil Quality - Extraction of Trace Elements Soluble in Aqua Regia First Edition Plastics - Preparation of PVC Pastes for Test Purposes - Dissolver Method First Edition Plastics - Generic Identification and Marking of Plastic Products Second Edition Agricultural Tractors and Machinery - Coding of Remote Hydraulic Power Services and Controls First Edition Corrosion of Metals and Alloys - Corrosion Tests in Artificial Atmosphere - Accelerated Outdoor Test by Intermittent Spraying of a Salt Solution (Scab Test) First Edition Paper and Board - Determination of CIE Whiteness, D65/10 Degree (Outdoor Daylight) Second Edition Paper and Board - Determination of CIE Whiteness, C/2 Degree (Indoor Illumination Conditions) First Edition Pulp, Paper and Board - Determination of Total Chlorine and Organically Bound Chlorine First Edition Guidelines for Plutonium Dioxide (PuO2) Sampling in a Nuclear Reprocessing Plant First Edition Nuclear fuel technology Preparation of plutonium sources and determination of 238Pu/239Pu isotope ratio by alpha spectrometry Second Edition Steel Tubes for Pressure Purposes - Qualification and Certification of Non-Destructive Testing (NDT) Personnel First Edition Motorcycles Methods for setting running resistance on a chassis dynamometer Second Edition Determination of Platinum in Platinum Jewellery Alloys - Gravimetric Determination by Reduction with Mercury(I) Chloride First Edition Determination of Palladium in Palladium Jewellery Alloys - Gravimetric Determination with Dimethylglyoxime First Edition Seamless and Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of Tube Ends for the Detection of Laminar Imperfections First Edition Telemark Skis and Bindings - Binding Mounting Area - Requirements and Test Methods First Edition Dental Handpieces - Dental Low-Voltage Electrical Motors First Edition Dentistry ù Single-use cartridges for local anaesthetics Second Edition

Hydraulic Fluid Power - Determination of Particulate Contamination by Automatic Counting Using the Light Extinction Principle First Edition; Corrigendum 1-1998 Plastics - Film and Sheeting - Determination of Dimensional Change on Heating First Edition Plastics - Film and Sheeting - Determination of Blocking Resistance First Edition Paints and Varnishes - Determination of Resistance to Humidity (Intermittent Condensation) First Edition

ISO ISO ISO ISO

11500 11501 11502 11503

ISO ISO ISO

11507 11508 11512

ISO ISO

11518-1 11518-2

ISO

11518-3

ISO

11518-6

ISO ISO

11518-8 11518-9

Paints and varnishes ù Exposure of coatings to artificial weathering ù Exposure to fluorescent UV lamps and water Second edition Soil Quality - Determination of Particle Density First Edition Machinery for Forestery - Tracked Special Machines - Performance Criteria for Brake Systems First Edition Information Technology - High-Performance Parallel Interface - Part 1: Mechanical, Electrical and Signalling Protocol Specification (HIPPI-PH) First Edition Information Technology - High-Performance Parallel Interface - Part 2: Framing Protocol (HIPPI-FP) Second Edition Information Technology - High-Performance Parallel Interface - Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical Link Control Protocol Data Units (HIPPI-LE) First Edition Information Technology - High-Performance Parallel Interface - Part 6: Physical Switch Control (HIPPI-SC) First Edition Second Edition Information Technology - High-Performance Parallel Interface Part 8: Mapping to Asynchronous Transfer Mode (HIPPI-ATM) First Edition Information Technology - High-Performance Parallel Interface - Part 9: Serial Specification (HIPPI-Serial) First Edition

ISO ISO

11518-10 11519-1

Information Technology - High-Performance Parallel Interface - Part 10: 6 400 Mbit/s Physical Layer (HIPPI-6400-PH) First Edition Road Vehicles - Low-Speed Serial Data Communication - Part 1: General and Definitions First Edition

ISO ISO

11519-3 11520-1

ISO ISO

11520-2 11529-1

ISO ISO ISO ISO ISO

11529-2 11530 11531 11533 11534

Road Vehicles - Low-Speed Serial Data Communication - Part 3: Vehicle Area Network (VAN) First Edition; Amendment 1: 1995 Agricultural Grain Driers - Determination of Drying Performance - Part 1: General First Edition Agricultural Grain Driers - Determination of Drying Performance - Part 2: Additional Procedures and Crop-Specific Requirements First Edition Milling Cutters - Designation - Part 1: Shank-type end mills of solid or tipped design Second Edition Milling Cutters - Designation - Part 2: Shank-type and bore-type milling cutters with indexable inserts Second Edition; Replaces ISO 7848: 1986 Road Vehicles - Hydraulic Jacks - Specifications First Edition Metallic Materials - Earing Test First Edition Iron Ores - Determination of Cobalt Content - Flame Atomic Absorption Spectrometric Method First Edition Iron ores Determination of tin Flame atomic absorption spectrometric method Second Edition

ISO

11535

Iron ores Determination of various elements Inductively coupled plasma atomic emission spectrometric method Second Edition

ISO

11537

Non-Destructive Testing - Thermal Neutron Radiographic Testing - General Principles and Basic Rules First Edition

ISO ISO

11540 11541

ISO

11542-1

ISO

11542-2 CORR 1

ISO

11542-2

ISO

11543

ISO

11544

ISO

11545

ISO

11546-1

ISO ISO

11546-2 11547

ISO

11551

ISO

11553-1

ISO

11553-2

ISO ISO ISO

11554 11555-1 11556

ISO

11557

ISO

11558

Caps for Writing and Marking Instruments Intended for Use by Children Up to 14 Years of Age - Safety Requirements First Edition Natural Gas - Determination of Water Content at High Pressure First Edition Plastics - Ultra-High- Molecular-Weight Polyethylene (PE-UHMW) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Second Edition Plastics ù Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials ù Part 2: Preparation of test specimens and determination of properties TECHNICAL CORRIGENDUM 1 First Edition Plastics - Ultra-High-Molecular-Weight Polyethylene (PE-UHMW) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties First Edition Modified Starch - Determination of Hydroxypropyl Content - Method Using Proton Nuclear Magnetic Resonance (NMR) Spectrometry First Edition Information Technology - Coded Representation of Picture and Audio Information - Progressive Bi-Level Image Compression First Edition; Corrigendum 2 - 12/15/2001 Agricultural Irrigation Equipment - Centre-Pivot and Moving Lateral Irrigation Machines with Sprayer or Sprinkler Nozzles Determination of Uniformity of Water Distribution Second Edition Acoustics - Determination of Sound Insulation Performances of Enclosures - Part 1: Measurements Under Laboratory Conditions (for Declaration Purposes) First Edition (CEN EN ISO 11546-1: 1995) Acoustics - Determination of Sound Insulation Performances of Enclosures - Part 2: Measurements in Situ (for Acceptance and Verification Purposes) First Edition (CEN EN ISO 11546-2: 1995) Small Craft - Start- in-Gear Protection First Edition (CEN EN ISO 11547: 1995) Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Method for Absorptance of Optical Laser Components Second Edition Safety of machinery Laser processing machines Part 1: General safety requirements First Edition; Cancels and Replaces ISO 11553:1996, Safety of machinery ù Laser processing machines ù Part 2: Safety requirements for hand-held laser processing devices First Edition [Superseded: ISO 11553] Optics and photonics Lasers and laser-related equipment Test methods for laser beam power, energy and temporal characteristics Third Edition Road vehicles Stabilizing devices for caravans and light trailers Part 1: Integrated stabilizers First Edition Paper and board - Determination of curl using a single vertically suspended test piece Second Edition Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DDS-DC Format Using 60 m and 90 m Length Tapes First Edition Information Technology - Data Compression for Information Interchange - Adaptive Coding with Embedded Dictionary - DCLZ Algorithm First Edition

ISO

11559

ISO

11560

ISO

11561

ISO

11562

ISO

11563

ISO ISO ISO ISO ISO ISO

11564 11565 CORR 1 11565 11566 11567 11568-1

ISO ISO ISO

11568-2 11568-4 11568-5

ISO

11569

ISO

11570

ISO

11571

ISO

11572

ISO

11573

ISO

11574

ISO

11575

Information Technology - Data Interchange on 12,7 mm Wide 18-Track Magnetic Tape Cartridges - Extended Format First Edition Information Technology - Information Interchange on 130 mm Optical Disk Cartridges Using the Magneto-Optical Effect, for Write Once, Read Multiple Functionality First Edition Ageing of Thermal Insulation Materials - Determination of the Long-Term Change in Thermal Resistance of Closed-Cell Plastics (Accelerated Laboratory Test Methods) First Edition Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Metrological Characteristics of Phase Correct Filters First Edition; Technical Corrigendum 1-1998 Crude Petroleum and Petroleum Products - Bulk Cargo Transfer - Guidelines for Achieving the Fullness of Pipelines First Edition Stationary Source Emissions - Determination of the Mass Concentration of Nitrogen Oxides - Naphthylethylenediamine Photometric Method First Edition; Corrigendum 1 04/01/2000 Road Vehicles - Spark-Plugs - Test Methods and Requirements Road Vehicles - Spark-Plugs - Test Methods and Requirements Second Edition Carbon Fibre - Determination of the Tensile Properties of Single-Filament Specimens First Edition Carbon Fibre - Determination of Filament Diameter and Cross-Sectional Area First Edition Banking Key management (retail) Part 1: Principles Second Edition Banking - Key Management (retail) - Part 2: Symmetric ciphers, their key management and life cycle Second Edition; Cancels and replaces ISO 11568-3:1994 Banking - Key Management (Retail) - Part 4: Asymmetric cryptosystems ù Key management and life cycle Second Edition Banking - Key Management (Retail) - Part 5: Key Life Cycle for Public Key Cryptosystems First Edition Information Technology - Telecommunications and Information Exchange Between Systems - 26-Pole Interface Connector Mateability Dimensions and Contact Number Assignments First Edition; AS/NZS 4244: 1994 Information Technology - Telecommunications and Information Exchange Between Systems - Open Systems Interconnection Transport Protocol Identification Mechanism First Edition; AS/NZS 4245: 1994 Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Networks Addressing Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Circuit Mode Bearer Services - Inter-Exchange Signalling Procedures and Protocol Third Edition Information Technology - Telecommunications and Information Exchange Between Systems - Synchronization Methods and Technical Requirements for Private Integrated Services Networks First Edition; AS/NZS 4138: 1995 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Circuit-Mode 64 kbit/s Bearer Services - Service Description, Functional Capabilities and Information Flows Second Edition Information Technology - Telecommunications and Information Exchange Between Systems - Protocol Mappings for the OSI Data Link Service First Edition

ISO ISO ISO

11576 11577 11578

Information Technology - Procedure for the Registration of Algorithms for the Lossless Compression of Data First Edition Information Technology - Open Systems Interconnection - Network Layer Security Protocol First Edition Information Technology - Open Systems Interconnection - Remote Procedure Call (RPC) First Edition

ISO

11579-1

ISO

11579-2

ISO

11579-3

Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Part 1: Reference Configuration for PISN Exchanges (PINX) First Edition; (ETSI ETS 300 475-1: 1995) (Corrigendum 1-1996) Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Part 2: Reference Configuration for HS-PISN Exchanges (HS-PINX) First Edition Information Technology - Private Integrated Services Network - Part 3: Reference Configuration for PINX Extension Lines First Edition

ISO

11581-1

Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 1: Icons - General First Edition

ISO ISO ISO

11581-2 11581-3 11581-5

Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 2: Object Icons Fisrt Edition Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 3: Pointer First Edition Information technology User system interfaces and symbols Icon symbols and functions Part 5: Tool icons First Edition

ISO

11581-6

ISO

11582

Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 6: Action Icons First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Generic Functional Protocol for the Support of Supplementary Services - Inter-Exchange Signalling Procedures and Protocols Second Edition

ISO

11584

ISO

11586-1

ISO

11586-2

ISO

11586-3

ISO

11586-4

ISO

11586-5

ISO

11586-6

Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Circuit-Mode Multi-Rate Bearer Services - Service Description, Functional Capabilities and Information Flows First Edition Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Overview, Models and Notation First Edition Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element (SESE) Service Definition First Edition Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element (SESE) Protocol Specification First Edition Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Protecting Transfer Syntax Specification First Edition Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element (SESE) Protocol Implementation Conformance Statement (PICS) Proforma First Edition Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Protecting Transfer Syntax Protocol Implementation Conformance Statement (PICS) Proforma First Edition

Information Technology - Open Systems Interconnection - Application Context for Systems Management with Transaction Processing First Edition Small Craft, Engine-Driven - Field of Vision from Helm Position First Edition Small craft Less than 8 m Lengh of Hull - Determination of Maximum Propulsion Power Rating First Edition Manipulating Industrial Robots - Automatic End Effector Exchange Systems - Vocabulary and Presentation of Characteristics First Edition

ISO ISO ISO

11587 11591 11592

ISO

11593

ISO ISO ISO ISO ISO ISO ISO

11599 11600 11601 11602-1 11602-2 11605 11606

ISO

11607-1

ISO ISO ISO ISO

11607-2 11608-1 11608-2 11608-3

ISO ISO

11608-4 11609

ISO ISO

11612 11613

Determination of Gas Porosity and Gas Permeability of Hydraulic Binders Containing Embedded Radioactive Waste First Edition Building Construction - Jointing Products - Classification and Requirements for Sealants Second Edition Wheeled Fire Extinguishers - Performance and Construction First Edition Fire Protection - Portable and Wheeled Fire Extinguishers - Part 1: Selection and Installation First Edition Fire Protection - Portable and Wheeled Fire Extinguishers - Part 2:Inspection and Maintenance First Edition Paper and Board - Calibration of Variable-Area Flowmeters First Edition Ships and Marine Technology - Marine Electromagnetic Compasses Second Edition; Corrigendum 1: 2/1/2005 Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems First edition; ISO 11607-1 and ISO 11607-2 cancel and replace ISO 11607:2003 Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes First edition; ISO 11607-1 and ISO 11607-2 cancel and replace ISO 11607:2003 Pen-Injectors for Medical Use - Part 1: Pen-Injectors - Requirements and Test Methods First Edition Pen-Injectors for Medical Use - Part 2: Needles - Requirements and Test Methods First Edition Pen-Injectors for Medical Use - Part 3: Finished Cartridges - Requirements and Test Methods First Edition Pen-injectors for medical use - Part 4: Requirements and test methods for electronic and electromechanical pen-injectors First Edition Dentistry - Toothpastes - Requirements, Test Methods and Marking First Edition Clothing for Protection Against Heat and Flame - Test Methods and Performance Requirements for Heat-Protective Clothing First Edition Protective Clothing for Firefighters - Laboratory Test Methods and Performance Requirements First Edition

ISO ISO ISO ISO ISO ISO ISO

11614 11620 11621 11622 11623 11625 11629

Reciprocating Internal Combustion Compression-Ignition Engines - Apparatus for Measurement of the Opacity and for Determintion of the Light Absorption Coefficient of Exhaust Gas First Edition; Replaces and Cancels ISO 3173:1974 and ISO/TR 4011:1976 Information and Documentation - Library Performance Indicators First Edition; Amendment 1: 1/15/2003 Gas Cylinders - Procedures for Change of Gas Service First Edition Gas cylinders - Conditions for filling gas cylinders First Edition Transportable Gas Cylinders - Periodic Inspection and Testing of Composite Gas Cylinders First Edition Gas Cylinders - Safe Handling Second edition Cranes Measurement of the mass of a crane and its components First Edition

ISO ISO

11630 11631

ISO ISO ISO ISO ISO ISO

11632 11634 CORR 1 11634 11640 11641 11642

ISO ISO ISO ISO ISO ISO

11643 11644 11646 11648-1 11648-2 11650

ISO

11652

ISO ISO ISO

11653 11654 11655

ISO

11659-1

ISO

11659-2

ISO ISO ISO ISO ISO ISO ISO

11659-3 11660-1 11660-2 11660-3 11660-5 11661 11662-1

ISO

11667

Cranes - Measurement of Wheel Alignment First Edition Measurement of Fluid Flow - Methods of Specifying Flowmeter Performance First Edition Stationary Source Emissions - Determination of Mass Concentration of Sulfur Dioxide - Ion Chromatography Method First Edition Snowboard-boots ù Interface with ski-bindings TECHNICAL CORRIGENDUM 1 Snowboard-Boots - Interface with Ski-Binding First Edition Leather - Tests for Colour Fastness - Colour Fastness to Cycles of to-and-fro Rubbing First Edition; (IULTCS/IUF 450) Leather - Tests for Colour Fastness - Colour Fastness to Perspiration First Edition; (IULTCS/IUF 426) Leather - Tests for Colour Fastness - Colour Fastness to Water First Edition; (IULTCS/IUF 421) Leather - Tests for Colour Fastness - Colour Fastness of Small Samples to Dry-Cleaning Solutions First Edition; (IULTCS/IUF 434) Leather - Tests for Adhesion of Finish First Edition; (IULTCS/IUF 470) Leather - Measurement of Area First Edition; (IULTCS/IUF 32) Statistical Aspects of Sampling from Bulk Materials - Part 1: General Principles First Edition Statistical Aspects of Sampling from Bulk Materials - Part 2: Sampling of Particulate Materials First Edition Performance of Refrigerant Recovery and/or Recycling Equipment First Edition Steel and Iron - Determination of Cobalt Content - Flame Atomic Absorption Spectrometric Method First Edition; BS 6200: Part 3: Section 3.11: Subsection 3.11.3: 1997 Steel - Determination of High Cobalt Content - Potentiometric Titration Method After Separation by Ion Exchange First Edition Acoustics - Sound Absorbers for Use in Buildings - Rating of Sound Absorption First Edition Measurement of Liquid Flow in Open Channels - Method of Specifying Performance of Hydrometric Equipment First Edition Textile Machinery and Accessories - Machine Parts in Contact with Textile Processing Oils - Part 1: Determination of Anticorrosive Effect upon Steel First Edition Textile machinery and accessories Machine parts in contact with textile processing oils Part 2: Determination of the impact on polymeric materials First Edition Textile machinery and accessories Machine parts in contact with textile processing oils Part 3: Determination of the impact on lacquers First Edition Cranes - Access, Guards and Restraints - Part 1: General First Edition Cranes - Access, Guards and Restraints - Part 2: Mobile Cranes First Edition Cranes - Access, Guards and Restraints - Part 3: Tower Cranes First Edition Cranes - Access, Guards and Restraints - Part 5: Bridge and Gantry Cranes First Edition Mobile Cranes - Presentation of Rated Capacity Charts First Edition Mobile Cranes - Experimental Determination of Crane Performance - Part 1: Tipping Loads and Radii First Edition Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Resin, Reinforced-Fibre and Mineral-Filler Content - Dissolution Methods First Edition

ISO

11668

Binders for Paints and Varnishes - Chlorinated Polymerization Resins - General Methods of Test First Edition Lasers and laser-related equipment ù Test methods for laser beam parameters ù Beam positional stability TECHNICAL CORRIGENDUM 1 Second Edition Lasers and laser-related equipment ù Test methods for laser beam parameters ù Beam positional stability Second Edition Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes Determination of the fracture toughness properties First edition Ships and marine technology Heading control systems Second Edition Textile machinery and accessories Flatbed knitting machines Vocabulary Second Edition Textile Machinery and Accessories - Chain Links for Wrap Knitting Machines - Vocabulary and Symbols First Edition Textile Machinery and Accessories - Main Dimensions of Flat Steel Healds with Open End Loops - Part 1: C-Shaped End Loops First Edition Textile Machinery and Accessories - Main Dimensions of Flat Steel Healds with Open End Loops - Part 2: J-Shaped End Loops First Edition Textile Machinery and Accessories - Main Dimensions of Open End Loop Flat Steel Healds and Their Corresponding Heald- Carrying Rods - Part 3: Carrying Rods for Healds with C- and J-Shaped End Loops First Edition Agricultural Irrigation Equipment - Aluminium Irrigation Tubes First Edition Machinery for Forestry - Safety Requirements and Testing for Pole-Mounted Powered Pruners - Part 1: Units Fitted with an Integral Combustion Engine First Edition Machinery for Forestry - Safety Requirements and Testing for Pole-Mounted Powered Pruners - Part 2: Units for Use with a BackPack Power Source First Edition Machinery for forestry ù Portable chainsaw safety requirements and testing ù Part 1: Chain-saws for forest service AMENDMENT 1: Balance Second Edition

ISO ISO ISO ISO ISO ISO

11670 CORR 1 11670 11673 11674 11675 11676

ISO

11677-1

ISO

11677-2

ISO ISO

11677-3 11678

ISO

11680-1

ISO

11680-2

ISO

11681-1 AMD 1

ISO

11681-1

Machinery for forestry Portable chain-saw safety requirements and testing Part 1: Chain-saws for forest service Second Edition

ISO ISO ISO

11681-2 11682 11683

ISO ISO ISO ISO

11684 11687-1 11687-2 11687-3

ISO

11689

ISO

11690-1

Machinery for forestry Portable chain-saw safety requirements and testing Part 2: Chain-saws for tree service Second Edition Brush-Cutters and Grass-Trimmers - Technical Data First Edition; (Corrected and Reprinted - 1994) Packaging - Tactile Warnings of Danger - Requirements Second Edition; Corrected and Reprinted 09/01/1998 Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Safety Signs and Hazard Pictorials General Principles First Edition Plain Bearings - Pedestal Plain Bearings - Part 1: Pillow Blocks First Edition Plain Bearings - Pedestal Plain Bearings - Part 2: Side Flange Bearings First Edition Plain Bearings - Pedestal Plain Bearings - Part 3: Centre Flange Bearings First Edition Acoustics - Procedure for the Comparison of Noise-Emission Data for Machinery and Equipment First Edition [Superseded By: GOST 31327] Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 1: Noise Control Strategies First Edition

ISO

11690-2

ISO ISO ISO ISO

11691 11692 11693 11694-1

ISO

11694-2

ISO ISO

11694-3 11694-4

ISO

11694-5

ISO ISO

11694-6 11697

ISO

11698-1

ISO

11698-2

ISO

11699-1

ISO

11699-2

ISO

11713

ISO

11721-1

ISO

11721-2

ISO ISO ISO ISO

11722 11723 11724 11726

Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 2: Noise Control Measures First Edition Acoustics - Measurement of Insertion Loss of Ducted Silencers without Flow - Laboratory Survey Method First Edition; (Corrected and Reprinted - 1995) Ferritic-Pearlitic Engineering Steels for Precipitation Hardening from Hot-Working Temperatures First Edition Identification Cards - Optical Memory Cards - General Characteristics Third Edition Identification Cards - Optical Memory Cards - Linear Recording Method - Part 1: Physical Characteristics Third Edition Identification Cards - Optical Memory Cards - Linear Recording Method - Part 2: Dimensions and Location of the Accessible Optical Area Third Edition Identification Cards - Optical Memory Cards - Linear Recording Method - Part 3: Optical Properties and Characteristics Second Edition Identification Cards - Optical Memory Cards - Linear Recording Method - Part 4: Logical Data Structures Second Edition Identification cards Optical memory cards Part 5: Data format for information interchange for applications using ISO/IEC 11694-4, Annex B First Edition Identification cards Optical memory cards Linear recording method Part 6: Use of biometrics on an optical memory card First Edition Bases for Design of Structures - Loads Due to Bulk Materials First Edition Micrographics - Methods of Measuring Image Quality Produced by Aperture Card Scanners - Part 1: Characteristics of the Test Images First Edition Micrographics - Methods of Measuring Image Quality Produced by Aperture Card Scanners - Part 2: Quality Criteria and Control First Edition Non-Destructive Testing - Industrial Radiographic Films - Part 1: Classification of Film Systems for Industrial Radiography First Edition Non-Destructive Testing - Industrial Radiographic Films - Part 2: Control of Film Processing by Means of Reference Values First Edition Carbonaceous Materials Used in the Production of Aluminium - Cathode Blocks and Baked Anodes - Determination of Electrical Resistivity at Ambient Temperature Textiles - Determination of Resistance of Cellulose-Containing Textiles to Micro-Organisms - Soil Burial Test - Part 1: Assessment of Rot-Retardant Finishing First Edition Textiles Determination of the resistance of cellulose-containing textiles to micro-organisms Soil burial test Part 2: Identification of long-term resistance of a rot retardant finish First Edition Solid Mineral Fuels - Hard Coal - Determination of Moisture in the General Analysis Test Sample by Drying in Nitrogen First Edition Solid mineral fuels Determination of arsenic and selenium Eschka┤s mixture and hydride generation method First Edition Solid mineral fuels Determination of total fluorine in coal, coke and fly ash First Edition Solid mineral fuels Guidelines for the validation of alternative methods of analysis First Edition

ISO ISO

11727 11731

ISO

11731-2

ISO

11732

ISO

11733

ISO

11734

ISO

11737-1 CORR 1

ISO

11737-1

ISO ISO

11737-2 11738

ISO

11748-1

ISO ISO ISO

11748-2 11748-3 11749

ISO ISO

11752 11754

ISO ISO

11755 11756

ISO ISO ISO ISO

11758 11759 11760 11770-1

Pneumatic Fluid Power - Identification of Ports and Control Mechanisms of Control Valves and Other Components First Edition Water Quality - Detection and Enumeration of Legionella First Edition Water quality Detection and enumeration of Legionella Part 2: Direct membrane filtration method for waters with low bacterial counts First Edition Water quality Determination of ammonium nitrogen Method by flow analysis (CFA and FIA) and spectrometric detection Second Edition Water quality Determination of the elimination and biodegradability of organic compounds in an aqueous medium Activated sludge simulation test Second Edition Water Quality - Evaluation of theUltimate" Anaerobic Biodegradability of Organic Compounds in Digested Sludge - Method by Measurement of the Biogas Production First Edition" Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products TECHNICAL CORRIGENDUM 1 Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products Second Edition;:2004 Sterilization of Medical Devices - Microbiological Methods - Part 2: Tests of Sterility Performed in the Validation of a Sterilization Process First Edition Agricultural Irrigation Equipment - Control Heads First Edition Road Vehicles - Technical Documentation of Electrical and Electronic Systems - Part 1: Content of Exchanged Documents First Edition Road Vehicles - Technical Documentation of Electrical and Electronic Systems - Part 2: Documentation Agreement First Edition Road Vehicles - Technical Documentation of Electrical and Electronic Systems - Part 3: Application Example First Edition Belt Drive - V-Ribbed Belts for the Automotive Industry - Fatigue Test First Edition; Technical Corrigendum 1: 4/01/2003 Flexible Cellular Polymeric Materials - Moulded and Extruded Sponge or Expanded Cellular Rubber Products - Compressibility Test on Finished Parts First Edition; Amendment 1: 09/15/2006 Space data and information transfer systems - Telemetry channel coding Second Edition Gas cylinders Cylinder bundles for compressed and liquefied gases (excluding acetylene) Inspection at time of filling Second edition Information Technology - Programming Languages - M Second Edition Rubber and Plastics Hoses - Exposure to a Xenon Arc Lamp - Determination of Changes in Colour and Appearance First Edition; Technical Corrigendum 1: 8/1/1998 Rubber Hoses and Hose Assemblies for Dispensing Liquefied Petroleum Gases (LPGs) - Specification First Edition Classification of coals First edition Information Technology - Security Techniques - Key Management - Part 1: Framework First Edition

ISO

11770-2

ISO ISO ISO

11770-3 11770-4 11782-1

ISO

11782-2

ISO

11783-1

ISO

11783-2 AMD 1

ISO

11783-2 CORR 1

ISO

11783-2

ISO

11783-3

ISO

11783-4

ISO

11783-5

ISO

11783-6 CORR 1

ISO

11783-6

ISO

11783-7 CORR 1

ISO

11783-7

ISO

11783-8

ISO

11783-9

ISO

11783-11

Information Technology - Security Techniques - Key Management - Part 2: Mechanisms Using Symmetric Techniques First Edition; Technical Corrigendum 1: 07/15/2005 Information Technology - Security Techniques - Key Management - Part 3: Mechanisms Using Asymmetric Techniques First Edition Information technology Security techniques Key management Part 4: Mechanisms based on weak secrets First Edition Corrosion of Metals and Alloys - Corrosion Fatigue Testing - Part 1: Cycles to Failure Testing First Edition Corrosion of Metals and Alloys - Corrosion Fatigue Testing - Part 2: Crack Propagation Testing Using Precracked Specimens First Edition Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 1: General standard for mobile data communication First Edition Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 2: Physical layer AMENDMENT 1 First Edition Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 2: Physical layer First Edition Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 2: Physical layer First Edition Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 3: Data Link Layer First Edition Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 4: Network Layer First Edition Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 5: Network Management First Edition: Corrigendum 1 6/15/2002 Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 6: Virtual terminal TECHNICAL CORRIGENDUM 1 First Edition Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 6: Virtual terminal First Edition Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 7: Implement Messages Application Layer First Edition Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 7: Implement messages application layer First Edition Tractors and machinery for agriculture and forestry Serial control and communications data network Part 8: Power train messages First Edition Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 9: Tractor ECU First Edition Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 11: Mobile data element dictionary First Edition

ISO ISO ISO ISO

11783-13 11784 11785 11786

ISO

11787

ISO

11788-1

ISO

11788-2

ISO ISO ISO

11788-3 11789 11795

ISO ISO

11798 11799

ISO ISO ISO ISO

11800 11801 CORR 2 11801 CORR 1 11801

ISO

11806

ISO

11807-1

ISO

11807-2

ISO

11810-1

ISO ISO ISO

11810-2 11812 11813

Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 13: File server First Edition Radio-Frequency Identification of Animals - Code Structure Second Edition; Amendment 1:11/15/2004 Radio-Frequency Identification of Animals - Technical Concept First Edition Agricultural Tractors and Machinery - Tractor- Mounted Sensor Interface - Specifications First Edition Machinery for Agriculture and Forestry - Data Interchange Between Management Computer and Process Computers - Data Interchange Syntax First Edition Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 1: General Description First Edition Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 2: Dairy Farming First Edition Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 3: Pig Farming First Edition Powered Edgers with Rigid Cutting Means - Definitions, Safety Requirements and Test Procedures First Edition Agricultural Tractor Drive Wheel Tyres - Method of Measuring Tyre Rolling Circumference First Edition Information and Documentation - Permanence and Durability of Writing, Printing and Copying on Paper - Requirements and Test Methods First Edition Information and documentation Document storage requirements for archive and library materials First Edition Information and Documentation - Requirements for Binding Materials and Methods Used in the Manufacture of Books First Edition Information technology û Generic cabling for customer premises Second Edition Information technology û Generic cabling for customer premises Second Edition Information technology û Generic cabling for customer premises Second Edition Agricultural and Forestry Machinery - Portable Hand-Held Combustion Engine Driven Brush Cutters and Grass Trimmers - Safety First Edition Integrated Optics - Vocabulary - Part 1: Basic Terms and Symbols Optique Integree - Vocabulaire - Partie 1: Termes Fondamentaux Et Symboles First Edition Integrated Optics - Vocabulary - Part 2: Terms Used in Classification Optique Integree - Vocabulaire - Partie 2: Termes Utilises Pour La Classification First Edition Lasers and laser-related equipment Test method and classification for the laser resistance of surgical drapes and/or patient protective covers Part 1: Primary ignition and penetration First edition Lasers and laser-related equipment ù Test method and classification for the laser-resistance of surgical drapes and/or patientprotective covers ù Part 2: Secondary ignition First edition Small Craft - Watertight Cockpits and Quick-Draining Cockpits First Edition Milk and Milk Products - Determination of Zinc Content - Flame Atomic Absorption Spectrometric First Edition

ISO ISO

11814 11815

ISO

11816-1

Dried milk Assessment of heat treatment intensity Method using high-performance liquid chromatography First Edition: IDF 162 Milk ù Determination of total milk-clotting activity of bovine rennets First Edition Milk and milk products Determination of alkaline phosphatase activity Part 1: Fluorimetric method for milk and milk-based drinks Second Edition

ISO ISO

11816-2 11817

Milk and Milk Products - Determination of Alkaline Phosphatase Activity - Part 2: Fluorometric Method for Cheese First Edition Roasted Ground Coffee - Determination of Moisture Content - Karl Fischer Method (Reference Method) First Edition

ISO ISO ISO

11819-1 11820 11821

ISO

11822

ISO

11825

ISO

11833-1

ISO ISO

11833-2 11838

ISO

11841-1

ISO

11841-2

ISO ISO

11843-1 11843-2

ISO ISO

11843-3 11843-4

ISO

11844-1

Acoustics - Measurement of the Influence of Road Surfaces on Traffic Noise - Part 1: Statistical Pass-By Method First Edition Acoustics - Measurements on Silencers IN SITU First Edition Acoustics - Measurements of the in Situ Sound Attenuation of a Removable Screen First Edition Information and Documentation - Extension of the Arabic Alphabet Coded Character Set for Bibliographic Information Interchange First Edition Textile Machinery and Accessories - Latch-Type Needles for Knitting Machines - Coordination of Shank Widths and Hook Heights First Edition Plastics - Unplasticized Poly(Vinyl Chloride) Sheets - Types, Dimensions and Characteristics - Part 1: Sheets of Thickness Not Less Than 1 mm First Edition Plastics - Unplasticized Poly(Vinyl Chloride) Sheets - Types, Dimensions and Characteristics - Part 2: Sheets of Thickness Less Than 1 mm First Edition Motorcycle and Motorcycle-Rider Kinematics - Vocabulary First Edition Road Vehicles and Internal Combustion Engines - Filter Vocabulary Part 1: Definitiions of Filters and Filter Components Vehicules Routiers Et Moteurs A┤ Combustion Interne - Vocabulaire Relatif Aux Filtres - Partie 1: Definitions Des Filtres Et De Leurs Composants First Edition Road Vehicles and Internal Combustion Engines - Filter Vocabulary Part 2: Definitiions of Characteristica of Filters and their Components Vehicules Routiers Et Moteurs A┤ Combustion Interne - Vocabulaire Relatif Aux Filtres - Partie 2: Definitions Des Caracteristiques Des Filtres Et De Leurs Composants First Edition Capability of Detection - Part 1: Terms and Definitions Capacite de detection - Partie 1: Termes et definitions First Edition; Technical Corrigendum 1: 11/15/2003 Capability of Detection - Part 2: Methodology in the Linear Calibration Case First Edition Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used First Edition Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value First Edition Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity First Edition

Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres First Edition Corrosion of metals and alloys Classification of low corrosivity of indoor atmospheres Part 3: Measurement of environmental parameters affecting indoor corrosivity First Edition Corrosion of Metals and Alloys - General Principles for Corrosion Testing First Edition Corrosion of Metals and Alloys - Determination of Resistance to Intergranular Corrosion of Solution Heat- Treatable Aluminium Alloys First Edition Machinery for Forestry - Self-Propelled Machinery - Safety Requirements Second Edition Textile Floor Coverings - Determination of Resistance to Delamination First Edition Textile Floor Coverings - Determination of Friability of Attached Foams First Edition Textile Floor Coverings - Pure Wool, Hand-Knotted Pile Carpets - Specification First Edition Textile Floor Coverings - Jute Carpet Backing Fabric - Specification First Edition Textile Floor Coverings - Coir Mats - Types and Specification First Edition Earth-Moving Machinery - Auxiliary Starting Aid Electrical Connector First Edition Instant Whole Milk Powder - Determination of White Flecks Number First Edition Milk and milk products Enumeration of presumptive Escherichia coli Part 1: Most probable number technique using 4methylumbelliferyl- Ô-D-glucuronide (MUG) Second Edition; IDF 170-1;:1997 [Replaced: ISO 11866-2, ISO 11866-2] Milk and milk products - Enumeration of presumptive Escherichia coli - Part 2: Colony-count technique at 44 ░C using membranes Second Edition; IDF 170-2; Replaces ISO 11866-3:1997

ISO

11844-2

ISO ISO

11844-3 11845

ISO ISO ISO ISO ISO ISO ISO ISO ISO

11846 11850 11857 11858 11859 11860 11861 11862 11865

ISO

11866-1

ISO

11866-2

ISO ISO ISO ISO

11868 11869 11870 11873

Heat-treated milk ù Determination of lactulose content ù Method using highperformance liquid chromatography Second Edition Yogurt - Determination of Titratable Acidity - Potentiometric Method First Edition Milk and Milk Products - Determination of Fat Content - General Guidance on the Use of Butyrometric Methods First Edition Hardmetals Determination of sulfur and carbon contents in cobalt metal powders Infrared detection method First edition

ISO

11881

ISO ISO

11882 11883

Corrosion of Metals and Alloys - Exfoliation Corrosion Testing of Aluminium Alloys First Edition; Technical Corrigendum 1: 7-15-1999 Optics and Optical Instruments - Microscopes - Interfacing Connection for 35 mm SLR Photo Cameras (T-Thread Adaptation) First Edition Optics and Optical Instruments - Microscopes - Marking of Stereomicroscopes First Edition

ISO

11884-1

Optics and photonics - Minimum requirements for stereomicroscopes - Part 1: Stereomicroscopes for general use Second Edition

ISO

11884-2

ISO

11885

Optics and photonics ù Minimum requirements for stereomicroscopes ù Part 2: High performance microscopes Second Edition Water quality ù Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) Second Edition

ISO

11886 CORR 1

ISO

11886

ISO

11890-1

ISO ISO

11890-2 11897

ISO

11898-1 CORR 1

ISO

11898-1

ISO

11898-2

ISO

11898-3 CORR 1

ISO ISO ISO ISO ISO ISO ISO ISO ISO

11898-3 11898-4 11898-5 11900-1 11900-2 11900-3 11901-1 11901-2 11903

ISO

11904-1

ISO ISO ISO ISO

11904-2 11905-1 11907-1 11907-2

ISO

11907-3

Building construction machinery and equipment ù Pile driving and extracting equipment ù Terminology and commercial Specifications First Edition Building construction machinery and equipment ù Pile driving and extracting equipment ù Terminology and commercial Specifications First Edition Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Part 1: Difference Method Second Edition Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method Second Edition Packaging - Sacks Made from Thermoplastic Flexible Film - Tear Propagation on Edge Folds First Edition Road vehicles ù Controller area network (CAN) ù Part 1: Data link layer and physical signalling TECHNICAL CORRIGENDUM 1 First Edition Road vehicles ù Controller area network (CAN) ù Part 1: Data link layer and physical signalling First Edition [Replaced: ISO 11898] Road vehicles Controller area network (CAN) Part 2: High-speed medium access unit First Edition; Together with 11898-1:2003 Replaces 11898:1993 Road vehicles ù Controller area network (CAN) ù Part 3: Low-speed, fault-tolerant, medium-dependent interface TECHNICAL CORRIGENDUM 1 First Edition [Replaced: ISO 11519-2] Road vehicles ù Controller area network (CAN) ù Part 3: Low-speed, fault-tolerant, medium-dependent interface First Edition [Superseded: ISO 11519-2] Road vehicles Controller area network (CAN) Part 4: Time-triggered communication Road vehicles ù Controller area network (CAN) ù Part 5: High-speed medium access unit with low-power mode First Edition Tools for pressing ù Ball-lock punch retainers ù Part 1: Types A and B, rectangular and square for light duty Second edition Tools for Pressing - Ball-Lock Punch Retainers - Part 2: Types C and D, Reduced for Light Duty First Edition Tools for pressing Ball-lock punch retainers Part 3: Type E, reduced for heavy duty First Edition Tools for pressing Gas springs Part 1: General specifications Second Edition Tools for pressing Gas springs Part 2: Specification of accessories Second Edition Tools for Pressing - Guide Pillar Mountings First Edition Acoustics - Determination of Sound Immission from Sound Sources Placed Close to the Ear - Part 1: Technique Using a Microphone in a Real Ear (MIRE Technique) First Edition Acoustics Determination of sound immission from sound sources placed close to the ear Part 2: Technique using a manikin First Edition Water Quality - Determination of Nitrogen - Part 1: Method Using Oxidative Digestion with Peroxosulfate First Edition Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 1: Guidance First Edition Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 2: Static Method First Edition Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 3: Dynamic Decomposition Method Using a Travelling Furnace First Edition

ISO ISO ISO

11907-4 11908 11909

ISO

11922-1

ISO ISO

11922-2 11923

ISO

11925-2

ISO

11925-3

ISO

11926-1

ISO

11926-2

ISO ISO ISO

11926-3 11928-1 11928-2

ISO

11929-1

ISO

11929-2

ISO

11929-3

ISO

11929-4

ISO

11929-5

ISO

11929-6

Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 4: Dynamic Decomposition Method Using a Conical Radiant Heater First Edition Binders for Paints and Varnishes - Amino Resins - General Methods of Test First Edition Binders for paints and varnishes ù Polyisocyanate resins ù General methods of test Second Edition Thermoplastics Pipes for the Conveyance of Fluids - Dimensions and Tolerances - Part 1: Metric Series First Edition; Together with ISO 11922-2, it Cancels and Replaces ISO 3606: 1976, ISO 3607: 1977, ISO 3608: 1976 and ISO 3609:1977 Thermoplastics Pipes for the Conveyance of Fluids - Dimensions and Tolerances - Part 2: Inch-Based Series First Edition; Together with ISO 11922-1, it Cancels and Replaces ISO 3606: 1976, ISO 3607: 1977, ISO 3608: 1976 and ISO 3609: 1977 Water Quality - Determination of Suspended Solids by Filtration Through Glass-Fibre Filters First Edition Reaction to Fire Tests - Ignitability of Building Products Subjected to Direct Impingement of Flame - Part 2: Single-Flame Source Test Second Edition Reaction to Fire Tests - Ignitability of Building Products Subjected to Direct Impingement of Flame - Part 3: Multi-Source Test First Edition; Technical Corrigendum 1-1998 Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 1: Ports with ORing Seal in Truncated Housing First Edition Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends First Edition (SAE J 1926/2) Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 3: Light-Duty (L Series) Stud Ends First Edition Micrographics - Quality Control of Graphic COM Recorders - Part 1: Characteristics of the Test Frames First Edition Micrographics - Quality Control of Graphic COM Recorders - Part 2: Quality Criteria and Control First Edition Determination of the Detection Limit and Decision Threshold for Ionizing Radiation Measurements - Part 1: Fundamentals and Application to Counting Measurements without the Influence of Sample Treatment First Edition Determination of the Detection Limit and Decision Threshold for Ionizing Radiation Measurements - Part 2: Fundamentals and Application to Counting Measurements with the Influence of Sample Treatment First Edition Determination of the Detection Limit and Decision Threshold for Ionizing Radiation Measurements - Part 3: Fundamentals and Application to Counting Measurements by High Resolution Gamma Spectrometry, without the Influence of Sample Treatment First Edition Determination of the Detection Limit and Decision Threshold for Ionizing Radiation Measurements - Part 4: Fundamentals and Application to Measurements by Use of Linear-Scale Analogue Ratemeters, without the Influence of Sample Treatment First Edition Determination of the detection limit and decision threshold for ionizing radiation measurements Part 5: Fundamentals and applications to counting measurements on filters during accumulation of radioactive material First edition Determination of the detection limit and decision threshold for ionizing radiation measurements Part 6: Fundamentals and applications to measurements by use of transient mode First edition

ISO

11929-7

ISO

11929-8

ISO

11932

ISO

11933-1

ISO

11933-2

ISO

11933-3

ISO ISO ISO

11933-4 11933-5 11940

ISO

11940-2

ISO ISO ISO ISO

11943 11948-1 11949 11950

ISO ISO

11951 11957

ISO ISO ISO ISO ISO

11960 CORR 1 11960 11961 11962 CORR 1 11963

ISO ISO ISO

11969 11970 11971

Determination of the detection limit and decision threshold for ionizing radiation measurements Part 7: Fundamentals and general applications First Edition Determination of the detection limit and decision threshold for ionizing radiation measurements Part 8: Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment First Edition Activity Measurements of Solid Materials Considered for Recycling, Re-Use, or Disposal as Non-Radioactive Waste First Edition Components for Containment Enclosures - Part 1: Glove/Bag Ports, Bungs for Glove/Bag Ports, Enclosure Rings and Interchangeable Units First Edition Components for Containment Enclosures - Part 2: Glove, Welded Bags, Gaiters for Remote-Handling Tongs and for Manipulators First Edition Components for Containment Enclosures - Part 3: Transfer Systems Such as Plain Doors, Airlock Chambers, Double Door Transfer Systems, Leaktight Connections for Waste Drums First Edition Components for Containment Enclosures - Part 4: Ventilation and Gas-Cleaning Systems Such as Filters, Traps, Safety and Regulation Valves, Control and Protection Devices First Edition Components for Containment Enclosures - Part 5: Penetrations for Electrical and Fluid Circuits First Edition Information and Documentation - Transliteration of Thai First Edition Information and documentation ù Transliteration of Thai characters into Latin characters Part 2: Simplified transcription of Thai language First edition Hydraulic Fluid Power - On-Line Automatic Particle-Counting Systems for Liquids - Methods of Calibration and Validation First Edition Urine-Absorbing Aids - Part 1: Whole-Product Testing First Edition Cold-Reduced Electrolytic Tinplate First Edition; Replaces ISO 1111-1, 1111-2, 4977-1, 4977-2 Cold-Reduced Electrolytic Chromium/Chromium Oxide-Coated Steel First Edition; Cold-Reduced Blackplate in Coil Form for the Production of Tinplate or Electrolytic Chromium /Chromium Oxide-Coated Steel First Edition Acoustics - Determination of Sound Insulation Performance of Cabins - Laboratory and in Situ Measurements First Edition Petroleum and natural gas industries ù Steel pipes for use as casing or tubing for wells TECHNICAL CORRIGENDUM 1 Third Edition Petroleum and natural gas industries ù Steel pipes for use as casing or tubing for wells Third Edition Petroleum and Natural Gas Industries - Steel Pipes for Use as Drill Pipe - Specification First Edition Micrographics ù Image mark (blip) used with 16 mm and 35 mm roll microfilm First Edition Plastics - Polycarbonate Sheets - Types, Dimensions and Characteristics First Edition (CEN EN ISO 11963: 1995) Water Quality - Determination of Arsenic - Atomic Absorption Spectrometric Method (Hydride Technique) First Edition (CEN EN ISO 11969- 1996) Specification and Approval of Welding Procedures for Production Welding of Steel Castings First Edition Visual Examination of Surface Quality of Steel Castings First Edition

ISO ISO

11972 11973

Corrosion-Resistant Cast Steels for General Applications First Edition Heat-Resistance Cast Steels and Alloys for General Applications First Edition

ISO

11978

ISO

11979-1

Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Information Supplied by the Manufacturer First Edition Ophthalmic implants Intraocular lenses Part 1: Vocabulary Implants ophtalmiques Lentilles intraoculaires Partie 1: Vocabulaire Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

11979-2 11979-3 11979-4 11979-5 11979-6 11979-7 11979-8 11979-9 11979-10 11980

ISO ISO

11981 11985

ISO ISO

11986 11987

ISO

11990

ISO

11992-1

ISO

11992-2 AMD 1

ISO

11992-2

ISO

11992-3

ISO

11992-4 CORR 1

Ophthalmic Implants - Intraocular Lenses - Part 2:Optical Properties and Test Methods First Edition; Corrigendum 1: 11/1/2003 Ophthalmic Implants - Intraocular Lenses - Part 3: Mechanical Properties and Test Methods Second Edition Ophthalmic Implants - Intraocular Lenses - Part 4: Labelling and Information First Edition Ophthalmic Implants - Intraocular Lenses - Part 5: Biocompatibility Second Edition Ophthalmic implants ù Intraocular lenses ù Part 6: Shelf-life and transport stability Second Edition Ophthalmic Implants - Intraocular Lenses - Part 7: Clinical Investigations Second Edition Ophthalmic implants Intraocular lenses Part 8: Fundamental requirements Second Edition Ophthalmic implants Intraocular lenses Part 9: Multifocal intraocular lenses First Edition Ophthalmic implants Intraocular lenses Part 10: Phakic intraocular lenses First Edition Opthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidance for Clinical Investigations First Edition Ophthalmic optics - Contact lenses and contact lens care products - Determination of physical compatibility of contact lens care products with contact lenses First Edition Opthalmic Optics - Contact Lenses - Ageing by Exposure to UV and Visible Radiation First Edition Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidelines for Determination of Preservative Uptake and Release First Edition Opthalmic Optics - Contact Lenses - Determination of Self-Life First Edition Optics and Optical Instruments - Lasers and Laser-Related Equipment - Determination of Laser Resistance of Tracheal Tube Shafts Second Edition Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 1: Physical layer and data-link layer Second Edition Road vehicles ù Interchange of digital information on electrical connections between towing and towed vehicles ù Part 2: Application layer for brakes and running gear AMENDMENT 1 Second Edition Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 2: Application layer for brakes and running gear Second Edition Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 3: Application layer for equipment other than brakes and running gear Second Edition Road vehicles ù Interchange of digital information on electrical connections between towing and towed vehicles ù Part 4: Diagnostics TECHNICAL CORRIGENDUM 1 First Edition

Road vehicles ù Interchange of digital information on electrical connections between towing and towed vehicles ù Part 4: Diagnostics First Edition Cranes - Availability - Vocabulary Appareils De Levage A Charge Suspendue - Disponibilite - Vocabulaire First Edition Aircraft - Stability Requirements for Loading and Servicing Equipment First Edition

ISO ISO ISO

11992-4 11994 11995

ISO

11997-1

ISO ISO

11997-2 11998

ISO

12000

ISO

12001

ISO

12003-1

ISO ISO ISO

12003-2 12004 12005

ISO

12006-2

ISO

12006-3

ISO ISO ISO

12017 12020 12021-1

ISO ISO ISO

12039 12040 12042

Plastics - Poly(Methyl Methacrylate) Double- and Triple-Skin Sheets - Test Methods First Edition CEN EN ISO 12 017: 1996 Water Quality - Determination of Aluminium - Atomic Absorption Spectrometric Methods First Edition Road Vehicles - Sensitivity to Lateral Wind - Part 1: Open- Loop Test Method Using Wind Generator Input First Edition Stationary Source Emissions - Determination of Carbon Monoxide, Carbon Dioxide and Oxygen - Performance Characteristics and Calibration of Automated Measuring Systems First Edition Graphic Technology - Prints and Printing Inks - Assessment of Light Fastness Using Filtered Xenon Arc Light First Edition Information Technology - Data Compression for Information Interchange - Binary Arithmetic Coding Algorithm First Edition

ISO

12043

Rolling Bearings - Single-Row Cylindrical Roller Bearings - Chamfer Dimensions for Loose Rib and Non-Rib Sides Second Edition

ISO ISO

12044 12046

Rolling Bearings - Single-Row Angular Contact Ball Bearings - Chamfer Dimensions for Outer Ring Non-Thrust Side First Edition Synchronous Belt Drives - Automotive Belts - Determination of Physical Properties First Edition

Paints and varnishes Determination of resistance to cyclic corrosion conditions Part 1: Wet (salt fog)/dry/humidity Second Edition Paints and Varnishes - Determination of Resistance to Cyclic Corrosion Conditions - Part 2: Wet (Salt Fog)/Dry/Humidity/UV Light First Edition Paints and varnishes Determination of wet-scrub resistance and cleanability of coatings Second Edition Plastics/Rubber - Polymer Dispersions and Rubber Latices (Natural and Synthetic) - Definitions and Review of Test Methods Second Edition Acoustics - Noise Emitted by Machinery and Equipment - Rules for the Drafting and Presentation of a Noise Test Code First Edition Agricultural and Forestry Tractors - Narrow-Track Wheeled Tractors - Part 1: Front-Mounted Roll-Over Protective Structures First Edition Agricultural and Forestry Tractors - Narrow-Track Wheeled Tractors - Part 2: Rear-Mounted Roll-Over Protective Structures First Edition Metallic Materials - Guidelines for the Determination of Forming-Limit Diagrams First Edition Laser and Laser-Related Equipment - Test Methods for Laser Beam Parameters - Polarization Second Edition Building Construction - Organization of Information About Construction Works - Part 2: Framework for Classification of Information First Edition Building construction ù Organization of information about construction works ù Part 3: Framework for object-oriented information First Edition [Superseded: BSI BS ISO 12006-3, BSI BS ISO/PAS 12006-3, ISO PAS 12006-3]

ISO

12048

Packaging - Complete, Filled Transport Packages - Compression and Stacking Tests Using a Compression Tester First Edition

ISO ISO

12052 12056

ISO ISO ISO ISO

12058-1 12076 12078 12080-1

ISO ISO

12080-2 12081

ISO ISO

12082 12083

ISO

12085

ISO

12086-1 CORR 1

ISO

12086-1

ISO

12086-2 CORR 1

ISO

12086-2

ISO

12087-1

Health informatics Digital imaging and communication in medicine (DICOM) including workflow and data management First Edition Aircraft - Self-Propelled Passenger Stairs for Large Capacity Aircraft - Functional Requirements First Edition Plastics - Determination of Viscosity Using a Falling-Ball Viscometer - Part 1: Inclined-Tube Method First Edition; Cancels and Replaces Annex B of ISO 9371 Steel Wire Ropes - Determination of the Actual Modulus of Elasticity First Edition Anhydrous milk fat Determination of sterol composition by gas liquid chromatography (Reference method) First Edition Dried Skimmed Milk - Determination of Vitamin A Content - Part 1: Colorimetric Method First Edition Dried Skimmed Milk - Determination of Vitamin A Content - Part 2: Method Using High-Performance Liquid Chromatography First Edition Milk - Determination of Calcium Content - Titrimetric Method First Edition Processed cheese and processed cheese products Calculation of the content of added citrate emulsifying agents and acidifiers/pHcontrolling agents, expressed as citric acid Second Edition; Information and Documentation - Electronic Manuscript Preparation and Markup First Edition Geometrical Product Specification (GPS) - Surface Texture: Profile Method - Motif Parameters First Edition; Technical Corrigendum 11998 Plastics ù Fluoropolymer dispersions and moulding and extrusion materials ù Part 1: Designation system and basis for specifications TECHNICAL CORRIGENDUM 1 Second Edition Plastics ù Fluoropolymer dispersions and moulding and extrusion materials ù Part 1: Designation system and basis for specifications Second Edition Plastics ù Fluoropolymer dispersions and moulding and extrusion materials ù Part 2: Preparation of test specimens and determination of properties TECHNICAL CORRIGENDUM 1 Second Edition Plastics ù Fluoropolymer dispersions and moulding and extrusion materials ù Part 2: Preparation of test specimens and determination of properties Second Edition Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional Specification - Part 1: Common Architecture for Imaging First Edition

ISO

12087-2

ISO

12087-3

ISO

12087-5

Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional Specification - Part 2: Programmer┤s Imaging Kernel System Application Program Interface First Edition; Corrigendum 1 09-15-1997 Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional Specification - Part 3: Image Interchange Facility (IIF) First Edition; Amendment 1-1996 Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional Specification - Part 5: Basic Image Interchange Format (BIIF) First Edition; Technical Corrigendum 1: 5/15/2001; Technical Corrigendum 2: 4/1/2002

Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange - Application Program Interface Language Bindings - Part 4: C First Edition

ISO

12088-4

ISO ISO

12089 12091

ISO ISO

12094 12095

ISO

12096

ISO ISO ISO

12097-1 12097-2 12097-3

ISO

12098

ISO

12100-1

Information Technology - Computer Graphics and Image Processing - Encoding for the Image Interchange Facility (IIF) First Edition Structured-Wall Thermoplastics Pipes - Oven Test First Edition Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing for the Detection of Laminar Imperfections in Strips/Plates Used in the Manufacture of Welded Tubes First Edition Seamless and Welded Steel Tubes for Pressure Purposes - Liquid Penetrant Testing First Edition Submerged Arc-Welded Steel Tubes for Pressure Purposes - Radiographic Testing of the Weld Seam for the Detection of Imperfections First Edition Road Vehicles - Airbag Components - Part 1: Vocabulary Vehicules Routiers - Composants Des Sacs Gonflables - Partie 1: Vocabulaire First Edition Road Vehicles - Airbag Components - Part 2: Testing of Airbag Modules First Edition Road Vehicles - Airbag Components - Part 3: Testing of Inflator Assemblies First Edition Road vehicles Connectors for the electrical connection of towing and towed vehicles 15-pole connector for vehicles with 24 V nominal supply voltage Second Edition Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology First Edition; Replaces TR 12100-1

ISO ISO ISO ISO ISO ISO

12100-2 12103-1 12103-2 12106 12107 12108

Safety of machinery Basic concepts, general principles for design Part 2: Technical principles First Edition; Replaces TR 12100-2 Road Vehicles - Test Dust for Filter Evaluation - Part 1: Arizona Test Dust First Edition Road Vehicles - Test Dust for Filter Evaluation - Part 2: Aluminium Oxide Test Dust First Edition Metallic Materials - Fatigue Testing - Axial-Strain-Controlled Method First Edition Metallic Materials - Fatigue Testing - Statistical Planning and Analysis of Data First Edition Metallic Materials - Fatigue Testing - Fatigue Crack Growth Method First Edition

ISO

12114

ISO

12115

ISO

12117

ISO ISO

12118 12119

ISO

12123

Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Cure Characteristics First Edition Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Flowability, Maturation and Shelf Life First Edition; Technical Corrigendum: 11-15-1998 Earth-Moving Machinery - Tip-Over Protection Structure (TOPS) for Compact Excavators - Laboratory Tests and Performance Requirements First Edition; Technical Corrigendum 1-12-01-2000 Air Cargo Equipment - Identification of Double-Stud Tie-Down Fittings Having an Omnidirectional Rated Load Capacity of 22 250 N (5 000 lbf) or Above First Edition Information Technology - Software Packages - Quality Requirements and Testing First Edition; AS/NZS 4366: 1996 Raw Optical Glass in Bulk and Preshaped Forms - Bubbles and Other Inclusions - Test Method and Classification First Edition; Amendment 1: 09/15/2005

ISO

12124

Acoustics - Procedures for the Measurement of Real-Ear Acoustical Characteristics of Hearing Aids First Edition Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallic Insert) with Metric Fine Pitch Thread - Product Grades A and B First Edition

ISO

12125

ISO

12126

ISO

12127

ISO ISO

12128 12129-1

ISO

12129-2

ISO

12130-1

ISO

12130-2

ISO

12130-3

ISO

12131-1

ISO

12131-2

ISO ISO ISO

12131-3 12132 12135

ISO ISO ISO ISO

12137-1 12137-2 12138 12140

ISO

12141

Plain Bearings - Part 2: Tolerances on Form and Position and Surface Roughness for Shafts, Flanges and Thrust Collars First Edition Plain Bearings - Hydrodynamic Plain Tilting Pad Thrust Bearings Under Steady-State Conditions - Part 1: Calculation of Tilting Pad Thrust Bearings First Edition Plain Bearings - Hydrodynamic Plain Tilting Pad Thrust Bearings Under Steady-State Conditions - Part 2: Functions for Calculation of Tilting Pad Thrust Bearings First Edition Plain Bearings - Hydrodynamic Plain Tilting Pad Thrust Bearings Under Steady-State Conditions - Part 3:Guide Values for the Calculation of Tilting Pad Thrust Bearings First Edition Plain Bearings - Hydrodynamic Plain Thrust Pad Bearings Under Steady-State Conditions Part 1: Calculation of Thrust Pad Bearings First Edition Plain Bearings - Hydronamic Plain Thrust Pad Bearings under Steady-State Conditions Part 2: Functions for the Calculation of Thrust Pad Bearings First Edition Plain Bearings - Hydrodynamic Plain Thrust Pad Bearings under Steady-State Conditions Part 3: Guide Values for the Calculation of Thrust Pad Bearings First Edition Plain Bearings - Quality Assurance of Thin-Walled Half Bearings - Design FMEA First Edition Metallic materials Unified method of test for the determination of quasistatic fracture toughness First Edition Paints and Varnishes - Determination of Mar Resistance - Part 1: Method Using a Curved Stylus First Edition; Technical Corrigendum 1: 12-15-1998 Paints and Varnishes - Determination of Mar Resistance - Part 2: Method Using a Pointed Stylus First Edition Textiles - Domestic Laundering Procedures for Textile Fabrics Prior to Flammability Testing First Edition Agricultural Machinery - Agricultural Trailers and Trailed Equipment - Drawbar Jacks First Edition Stationary source emissions Determination of mass concentration of particulate matter (dust) at low concentrations Manual gravimetric method First edition

ISO ISO

12142 12145

Electronic Imaging - Media Error Monitoring and Reporting Techniques for Verification of Stored Data on Optical Digital Data Disks Resistance Welding Equipment - Angles for Mounting Spot Welding Electrodes First Edition

Prevailing Torque Type All-Metal Hexagon Nuts with Flange with Metric Fine Pitch Thread - Product Grades A and B First Edition Clothing for Protection Against Heat and Flame - Determination of Contact Heat Transmission Through Protective Clothing or Constituent Materials First Edition Plain Bearings - Lubrication Holes, Grooves and Pockets - Dimensions, Types, Designation and Their Application to Bearing Bushes Second Edition Plain Bearings - Part 1: Fits First Edition

ISO

12149

ISO

12151-1

ISO

12151-2

ISO

12151-3

ISO

12151-4

ISO ISO ISO ISO

12151-5 12156-1 12156-2 12161

ISO ISO ISO

12162 12164-1 12164-2

ISO

12165

ISO

12166

ISO

12167-1

ISO

12167-2

ISO

12168-1

ISO ISO ISO ISO ISO ISO

12168-2 12169 12170 12171 12172 12173

Bolted Bonnet Steel Globe Valves for General-Purpose Applications First Edition Connections for Hydraulic Fluid Power and General Use - Hose Fittings - Part 1: Hose Fittings with ISO 8434-3 O-Ring Face Seal Ends First Edition Connections for hydraulic fluid power and general use Hose fittings Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24░ cone connector ends with O-rings First Edition Connections for Hydraulic Fluid Power and General Use - Hose Fittings - Part 3: Hose Fittings with ISO 6162 Flange Ends First Edition Connections for hydraulic fluid power and general use ù Hose fittings ù Part 4: Hose fittings with ISO 6149 metric stud ends First Edition Connections for hydraulic fluid power and general use ù Hose fittings ù Part 5: Hose fittings with ISO 8434-2 37░ flared ends First Edition Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method Second Edition Diesel fuel ù Assessment of lubricity using the high-frequency reciprocating rig (HFRR) ù Part 2: Limit Second Edition Road vehicles Endurance braking systems of motor vehicles and towed vehicles Test procedures First Edition Thermoplastics Materials for Pipes and Fittings for Pressure Applications - Classification and Designation - Overall Service (Design) Coefficient First Edition (CEN EN ISO 12162: 1995) Hollow Taper Interface with Flange Contact Surface - Part 1: Shanks - Dimensions First Edition Hollow Taper Interface with Flange Contact Surface - Part 2: Receivers - Dimensions First Edition Tools for Moulding - Components of Compression and Injection Moulds and Diecasting Dies - Terms and Symbols Outillage De Moulage - Composants Des Moulages Par Compression, Moules D'Injection Et Moules Pour Fonderie Sous Pression - Termes Et Symboles First Edition Resistance Welding Equipment - Particular Specifications Applicable to Transformers with One Secondary Winding for Multi-Spot Welding, as Used in the Automobile Industry First Edition Plain Bearings - Hydrostatic Plain Journal Bearings with Drainage Grooves under Steady-State Conditions - Part 1: Calculation of OilLubricated Plain Journal Bearings with Drainage Grooves First Edition Plain Bearings - Hydrostatic Plain Journal Bearings with Drainage Grooves under Steady-State Conditions - Part 2: Characteristic Values for the Calculation of Oil-Lubricated Plain Journal Bearings with Drainage Grooves First Edition Plain Bearings - Hydrostatic Plain Journal Bearings without Drainage Grooves Under Steady-State Conditions - Part 1: Calculation of Oil-Lubricated Plain Journal Bearings without Drainage Grooves First Edition Plain Bearings - Hydrostatic Plain Journal Bearings without Drainage Grooves Under Steady-State Conditions - Part 2: Characteristic Values for the Calculation of Oil-Lubricated Plain Journal Bearings without Drainage Grooves First Edition Nickel Oxide - Determination of Nickel Content - Electrolytic Deposition Method First Edition Gas Welding Equipment - Thermoplastic Hoses for Welding and Allied Processes First Edition Space Data and Information Transfer Systems - Telecommand - Channel Service Second Edition Space data and information transfer systems - Telecommand - Data routing service Second Edition Space data and information transfer systems - telecommand-command operation procedures Second Edition

Space data and information transfer systems Telecommand Architectural specification for the data management service Second Edition

ISO

12174

ISO ISO ISO

12175 12176-1 12176-2

Space Data and Information Transfer Systems - Standard Formatted Data Units - Structure and Construction Rules First Edition Plastics pipes and fittings Equipment for fusion jointing polyethylene systems Part 1: Butt fusion Second Edition Plastics Pipes and Fittings - Equipment for Fusion Jointing Polyethylene Systems - Part 2: Electrofusion First Edition

ISO ISO

12176-3 12176-4

ISO ISO ISO

12179 12183 12184

ISO ISO

12185 12192

Plastics Pipes and Fittings - Equipment for Fusion Jointing Polyethylene Systems - Part 3: Operator's Badge Second Edition Plastics Pipes and Fittings - Equipment for fusion Jointing Polyethylene Systems - Part 4: Traceability Coding First Edition Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Calibration of Contact (Stylus) Instruments First Edition; TECHNICAL CORRIGENDUM 1: 12-01-2003 Nuclear fuel technology Controlledpotential coulometric assay of plutonium Second Edition Determination of Solubility in Nitric Acid of Plutonium in Unirradiated Mixed Oxide Fuel Pellets (U,Pu)O2 First Edition Crude Petroleum and Petroleum Products - Determination of Density - Oscillating U-Tube Method First Edition; Technical Corrigendum 1:8-15-2001 Paper and Board - Compressive Strength - Ring Crush Method First Edition

ISO ISO ISO ISO ISO

12193 12194 12195 12197 12199

ISO

12200

ISO ISO

12205 12207

ISO

12209-1

ISO

12209-2

ISO ISO

12209-3 12210-1

Petroleum Products - Determination of the Oxidation Stability of Middle-Distillate Fuels First Edition (CEN EN ISO 12205: 1996) Information Technology - Software Life Cycle Processes First Edition; Amendment 1: 5/01/2002; Amendment 2: 11/01/2004 Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 1: Yoke Type Connections First Edition Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 2: Threaded Connections First Edition Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 3: Adaptor for 230 Bar Valves First Edition Cranes - Anchoring Devices for In-Service and Out-of-Service Conditions - Part 1: General First Edition

ISO

12210-4

Cranes - Anchoring Devices for In-Service and Out-Of-Service Conditions - Part 4: Jib Cranes Corrigendum 1: 2000; First Edition

Animal and vegetable fats and oils Determination of lead by direct graphite furnace atomic absorption spectroscopy Second Edition Leaf Tobacco - Determination of Strip Particle Size First Edition Threshed Tobacco - Determination of Residual Stem Content First Edition Woodruff Keyseat Cutters - Dimensions First Edition Alphabetical Ordering of Multilingual Terminological and Lexcographical Data Represented in the Latin Alphabet First Edition Computer Applications in Terminology - Machine-Readable Terminology Interchange Format (MARTIF) - Negotiated Interchange First Edition

ISO ISO ISO ISO ISO

12213-1 12213-2 12213-3 12213-3 DAM 1 12214

ISO

12215-1

ISO

12215-2

Natural gas Calculation of compression factor Part 1: Introduction and guidelines Second Edition Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis Second Edition Natural gas Calculation of compression factor Part 3: Calculation using physical properties Second Edition Natural Gas - Calculation of compression factor - Part 3: Calculation using physical properties 2005 Road Vehicles - Direction-of-Motion Stereotypes for Automotive Hand Controls First Edition Small Craft - Hull Construction and Scantlings - Part 1: Materials: Thermosetting Resins, Glass-Fibre Reinforcement, Reference Laminate First Edition Small Craft - Hull Construction and Scantlings - Part 2: Materials: Core Materials for Sandwich Construction, Embedded Materials First Edition

ISO ISO

12215-3 12215-4

Small craft - Hull Construction and Scantlings - Part 3: Materials: Steel, Aluminium Alloys, Wood, Other Materials First Edition Small Craft - Hull Construction and Scantling - Part 4: Workshop and Manufacturing First Edition

ISO

12216

ISO

12217-1

ISO

12217-2

ISO ISO

12217-3 12218

ISO

12222

ISO ISO

12224-1 12224-2

ISO

12224-3

ISO ISO ISO

12228 12230 12231

ISO ISO ISO

12232 12233 12234-1

Small Craft - Windows, Portlights, Hatches, Deadlights and Doors - Strength and Watertightness Requirements First Edition Small Craft - Stability and Buoyancy Assessment and Categorization - Part 1: Non-Sailing Boats of Hull Length Greater than or Equal to 6 m First Edition Small Craft - Stability and Buoyancy Assessment and Categorization - Part 2: Sailing Boats of Hull Length Greater than or Equal to 6 m First Edition Small Craft - Stability and Buoyancy Assessment and Categorization - Part 3: Boats of Hull Length Less Than 6 m First Edition Graphic Technology - Process Control - Offset Platemaking First Edition Cinematography - Manufacturer-Printed, Latent Image Indentification on 16 mm, 35 mm and 65 mm Motion-Picture Film Specifications and Dimensions Third Edition; Corrigendum 1: 02/01/2004 Solder Wire, Solid and Flux Cored - Specification and Test Methods - Part 1: Classification and Performance Requirements First Edition Flux Cored Solder Wire - Specification and Test Methods - Part 2: Determination of Flux Content First Edition Solder wire, solid and flux cored Specifications and test methods Part 3: Wetting balance test method for flux cored solder wire efficacy First Edition Animal and Vegatable Fats and Oils - Determination of Individual and Total Sterols Contents - Gas Chromatographic Method First Edition Polybutene (PB) Pipes - Effect of Time and Temperature on the Expected Strength First Edition Photography Electronic still picture imaging Vocabulary Second Edition Photography Digital still cameras Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index Second Edition Photography - Electronic Still-Picture Cameras - Resolution Measurements First Edition Electronic Still-Picture Imaging - Removable Memory - Part 1: Basic Removable-Memory Module First Edition

ISO ISO ISO ISO

12234-2 12236 12238 12239

ISO ISO ISO ISO ISO

12240-1 12240-2 12240-3 12240-4 12241

ISO

12243

ISO

12246

ISO ISO

12248 12256

ISO

12258

Electronic Still-Picture Imaging - Removable Memory - Part 2: TIFF/EP Image Data Format First Edition Geosynthetics Static puncture test (CBR test) Second Edition Pneumatic Fluid Power - Directional Control Valves - Measurement of Shifting Time First Edition Fire detection and fire alarm systems - Smoke alarms First Edition Spherical Plain Bearings - Part 1: Radial Spherical Plain Bearings First Edition; This First Edition Cancels and Replaces ISO 61241:1987, ISO 6124-2:1982, ISO 6124-3:1982 and ISO 6125:1982 Spherical Plain Bearings - Part 2: Angular Contact Radial Spherical Plain Bearings First Edition Spherical Plain Bearings - Part 3: Thrust Spherical Plain Bearings First Edition Spherical Plain Bearings - Part 4: Spherical Plain Bearing Rod Ends First Edition; Corrigendum 1 07/15/1999 Thermal Insulation for Building Equipment and Industrial Installations - Calculation Rules First Edition Medical gloves made from natural rubber latex Determination of water-extractable protein using the modified Lowry method First Edition Information Technology - 8 mm Wide Magnetic Tape Cartridge Dual Azimuth Format for Information Interchange - Helical Scan Recording First Edition Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DATA/DATDC Format Using 60 m and 90 m Length Tapes First Edition Aerospace - Drives, Internal, Cruciform, Ribbed - Metric Series First Edition Aerospace - Bolts, Reduced Bihexagonal Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 275 MPa - Dimensions First Edition

ISO

12260

Aerospace - Screws, Pan Head, Internal Offset Cruciform Ribbed or Unribbed Drive, Stepped Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition

ISO

12261

ISO

12268

ISO

12272

ISO

12273

Aerospace - Screws, Pan Head, Internal Offset Cruciform Ribbed or Unribbed Drive, Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition Aerospace - Nuts, Hexagonal, Plain, Reduced Height, Reduced Across Flats, with MJ Threads, Cls: 450 MPa (at Ambient Temp.)/425 Degs C, 600 MPA (at Ambient Temp.)/235 Degs C, 600 MPa (at Ambient Temp.)/315 Degs C, 600 MPa (at Ambient Temp.)/650 Degs C, 900 MPa (at Ambient Temp.)/235 Degs C, 900 MPa (at Ambient Temp.)/730 Degs C and 1 100 MPa (at Ambient Temp.)/600 Degs C - Dimensions First Edition Aerospace - Nuts, Anchor, Self-Locking, Floating, Two Lug, with Incremental Counterbore, with MJ Threads, Classifications: 900 MPa (AT Ambient Temperature)/235 Degrees C, 900 MPa (AT Ambient Temperature)/315 Degrees C and 900 MPa (AT Ambient Temperature)/425 Degrees C - Dimensions First Edition Aerospace - Nuts, Anchor, Self-Locking, Floating, Self-Aligning, Two Lug, with MJ Threads, Classifications: 900 MPa (at Ambient Temperature/235 Degrees Celsius, 900 MPa (at Ambient Temperature)315 Degrees Celsius and 900 MPa (at Ambient Temperature)425 Degrees Celsius - Dimensions First Edition

ISO

12274

ISO

12277

ISO ISO

12278 12280

ISO ISO ISO ISO

12281 12288 12289 12290

ISO ISO ISO ISO ISO ISO ISO ISO ISO

12301 12302 12303 12306 12307-1 12307-2 12308 12319 12333

ISO ISO

12334 12345

ISO ISO

12353-1 12353-2

ISO ISO ISO ISO

12357-2 12357 CORR 1 12357 12364

Aerospace - Nuts, Anchor, Self-Locking, Floating, Self-Aligning, Single Lug, with MJ Threads, Classifications: 900 MPa (at Ambient Temperature/235 Degrees Celsius, 900 MPa (at Ambient Temperature)315 Degrees Celsius and 900 MPa (at Ambient Temperature)425 Degrees Celsius - Dimensions First Edition Aerospace - Gang Channel, Self-Locking, Floating, Standard Series, with Counterbore, Classifications: 1 100 MPa (at Ambient Temperature)/120 Degrees C, 1 100 MPa (at Ambient Temperature)/235 Degrees C and 1 100 MPa (at Ambient Temperature)/425 Degrees C - Dimensions First Edition Aerospace - Nuts, Barrel, Self-Locking, Floating, Self-Aligning, with MJ Threads, Classifications: 900 MPa (at Ambient Temperature)/235 Degrees C, 1 100 MPa (at Ambient Temperature)/235 Degrees C, 1 250 MPa (at Ambient Temperature)/235 Degrees C and 1 550 MPa (at Ambient Temperature)/235 Degrees C - Dimensions First Edition Aerospace - Retainers, Spring, Sheet Metal, for Self-Locking Barrel Nuts - Dimensions First Edition Aerospace - Rivets, Solid, 100 Degree Normal Countersunk Head, in Metallic Material, with or without Surface Treatment Dimensions First Edition Aerospace - Rivets, Solid, in Nickel Alloy - Procurement Specification First Edition Aerospace Rivets, solid, in corrosion-resisting steel Procurement specification First Edition Aerospace - Rivets, Solid, in Titanium or Titanium Alloy - Procurement Specification First Edition Plain Bearings - Quality Control Techniques and Inspection of Geometrical and Material Quality Characteristics First Edition; (Corrigendum 1-1995) Plain Bearings - Quality Characteristics - Statistical Process Control (SPC) First Edition Plain Bearings - Quality Characteristics - Calculation of Machine and Process Capabilities First Edition Plain Bearings - Measurement of Wall Thickness of Thin-Walled Half-Bearings and Thin-Walled Bushes First Edition Plain Bearings - Wrapped Bushes - Part 1: Checking the Outside Diameter First Edition Plain Bearings - Checking of Wrapped Bushes - Part 2: Checking the Inside Diameter First Edition Plain Bearings - Quality Assurance - Sample Types - Definitions, Applications and Testing First Edition Aerospace'P' (loop style) clamps Procurement specification First Edition Aerospace - Constant Displacement Hydraulic Motors - General Specifications for 35 000 kPa Systems First Edition Aerospace - Hydraulic, Pressure-Compensated, Variable Delivery Pumps - General Requirements for 35 000 kPa Systems First Edition Diesel engines Cleanliness assessment of fuel injection equipment First Edition Road Vehicles - Traffic Accident Analysis - Part 1: Vocabulary Vehicules Routiers - Analyse Des Accidents De La Circulation - Partie 1: Vocabulaire First Edition Road vehicles Traffic accident analysis Part 2: Guidelines for the use of impact severity measures First Edition Commercial road vehicles ù Drawbar couplings and eyes for rigid drawbars ù Part 2: Strength tests for special applications First Edition Commercial road vehicles ù Drawbar couplings and eyes for rigid drawbars ù Strength tests Commercial Road Vehicles - Drawbar Couplings and Eyes for Rigid Drawbars - Strength Tests First Edition Two-Wheeled Motorcycles - Antilock Braking Systems (ABS) - Tests and Measurement Methods First Edition

ISO

12366

Two-Wheeled Mopeds - Antilock Braking Systems (ABS) - Tests and Measurement Methods First Edition

ISO ISO

12368 12374

Agricultural Vehicles - Mechanical Hook-Type Connections on Towing Vehicles - Test Methods and Requirements First Edition Agricultural Irrigation - Wiring and Equipment for Electrically Driven or Controlled Irrigation Machines First Edition

ISO ISO ISO ISO ISO

12401 12402-1 12402-2 12402-3 12402-4

ISO ISO

12402-5 CORR 1 12402-5

ISO ISO ISO ISO

12402-6 12402-7 12402-8 12402-9

ISO

12402-10

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

12460-1 12465 12466-1 12466-2 12468-1 12468-2 12472 12473 12478-1 12480-1 12480-3 12480-4 12482-1 12485 12488-1

Small craft Deck safety harness and safety line for use on recreational craft Safety requirements and test methods First Edition Personal flotation devices Part 1: Lifejackets for seagoing ships Safety requirements First Edition Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements First Edition Personal flotation devices Part 2: Lifejackets, performance level 150 Safety requirements First Edition Personal flotation devices Part 2: Lifejackets, performance level 100 Safety requirements First Edition Personal flotation devices ù Part 5: Buoyancy aids (level 50) ù Safety requirements TECHNICAL CORRIGENDUM 1 First Edition Personal flotation devices ù Part 5: Buoyancy aids (level 50) ù Safety requirements First Edition Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods First Edition Personal flotation devices Part 7: Materials and components Safety requirements and test methods First Edition Personal flotation devices Part 8: Accessories Safety requirements and test methods First Edition Personal flotation devices Part 9: Test methods First Edition Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices First Edition Wood-based panels ù Determination of formaldehyde release ù Part 1: Formaldehyde emission by the 1-cubic-metre chamber method First Edition Plywood ù Specifications First Edition Plywood - Bonding Quality - Part 1: Test Methods First Edition Plywood - Bonding Quality - Part 2: Requirements First Edition External Exposure of Roofs to Fire - Part 1: Test Methods First Edition External fire exposure to roofs Part 2: Classification of roofs First Edition Fire resistance of timber door assemblies Method of determining the efficacy of intumescent seals First Edition General principles of cathodic protection in sea water First Edition Cranes - Maintenance Manual - Part 1: General First Edition Cranes - Safe Use - Part 1: General First Edition Cranes Safe use Part 3: Tower cranes First edition Cranes ù Safe use ù Part 4: Jib cranes First edition Cranes - Condition Monitoring - Part 1: General First Edition Tower Cranes - Stability Requirements First Edition Cranes Tolerances for wheels and travel and traversing tracks Part 1: General First edition; Supercedes ISO 8306:1985

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

12488-4 12491 12494 12499 12500-1 12500-2 12508 12509 12510 12511

ISO ISO ISO ISO ISO ISO

12543-1 12543-2 12543-3 12543-4 12543-5 12543-6

ISO

12567-1

ISO ISO

12567-2 12569

ISO

12570

Cranes Tolerances for wheels and travel and traversing tracks Part 4: Jib cranes First Edition Statistical Methods for Quality Control of Building Materials and Components First Edition Atmospheric icing of structures First Edition Industrial Fans - Mechanical Safety of Fans - Guarding First Edition Filters for compressed air ù Test methods ù Part 1: Oil aerosols First Edition Filters for compressed air ù Test methods ù Part 2: Oil vapours First Edition Earth-Moving Machinery - Operator Station and Maintenance Areas - Bluntness of Edges First Edition Earth-moving machinery Lighting, signalling and marking lights, and reflex-reflector devices Second Edition Earth-moving machinery Operation and maintenance Maintainability guidelines First Edition Earth-Moving Machinery - Hour Meters First Edition Glass in Building - Laminated Glass and Laminated Safety Glass - Part 1: Definitions and Description of Componenet Parts First Edition Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass First Edition Glass in Building - Laminated Glass and Laminated Safety Glass - Part 3: Laminated Glass First Edition Glass in Building - Laminated Glass and Laminated Safety Glass - Part 4: Test Methods for Durability First Edition Glass in Building - Laminated Glass and Laminated Safety Glass - Part 5: Dimensions and Edge Finishing First Edition Glass in Building - Laminated Glass and Laminated Safety Glass - Part 6: Appearance First Edition Thermal Performance of Windows and Doors - Determination of Thermal Transmittance by Hot Box Method - Part 1: Complete Windows and Doors First Edition Thermal performance of windows and doors Determination of thermal transmittance by hot box method Part 2: Roof windows and other projecting windows First Edition Thermal Performance of Buildings - Determination of Air Change in Buildings - Tracer Gas Dilution Method First Edition Hydrothermal Performance of Building Materials and Products - Determination of Moisture Content by Drying at Elevated Temperature First Edition

ISO

12571

Hydrothermal Performance of Building Materials and Products - Determination of Hygroscopic Sorption Properties First Edition

ISO

12572

ISO ISO ISO ISO ISO

12576-1 12579 12580 12606 12608

ISO

12611

Hygrothermal Performance of Building Materials and Products - Determination of Water Vapour Transmission Properties First Edition Thermal Insulation - Insulating Materials and Products for Buildings - Conformity Control Systems Part 1: Factory-Made Products First Edition Timber structures ù Glued laminated timber ù Method of test for shear strength of glue lines First Edition Timber structures ù Glued laminated timber ù Methods of test for glue-line delamination First Edition Cinematography - Care and Preservation of Magnetic Audio Recordings for Motion Pictures and Television First Edition Cinematography - Room and Surround Conditions for Evaluating Television Display from Telecine Reproduction First Edition Cinematography Audio head tones for use in international exchange of 35 mm analogue magnetic film masters Specifications and location Second Edition

ISO ISO ISO ISO

12612 12615 12616 12620

ISO

12625-1

ISO

12625-3

ISO ISO ISO ISO

12625-4 12625-5 12625-6 12625-7

ISO ISO ISO ISO ISO ISO ISO

12625-8 12625-9 12634 12635 12636 12637-1 12637-5

ISO

12639 AMD 1

ISO

12639

ISO

12640

ISO

12640-2

ISO ISO

12640-3 12641

ISO ISO

12642 12642-2

Cinematography - Interchange of Post-Production Materials First Edition Bibliographic references and source identifiers for terminology work First Edition Translation-Oriented Terminography First Edition Computer Applications in Terminology - Data Categories First Edition Tissue paper and tissue products Part 1: General guidance on terms Papier tissu et produits en tissu Partie 1: Lignes directrices gÚnÚrales relatives aux termes First edition Tissue paper and tissue products Part 3: Determination of thickness, bulking thickness and apparent bulk density First Edition Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at break and tensile energy absorption First Edition Tissue paper and tissue products Part 5: Determination of wet tensile strength First Edition Tissue paper and tissue products Part 6: Determination of grammage First Edition Tissue paper and tissue products ù Part 7: Determination of optical properties First edition Tissue paper and tissue products Part 8: Water-absorption time and waterabsorption capacity, basket-immersion test method First edition; Tissue paper and tissue products Part 9: Determination of ball burst strength First edition Graphic Technology - Determination of Tack of Paste Inks and Vehicles by a Rotary Tackmeter First Edition Graphic Technology - Plates for Offset Printing - Dimensions First Edition Graphic Technology - Blankets for Offset Printing First Edition Graphic technology Vocabulary Part 1: Fundamental terms First Edition Graphic Technology - Multilingual Terminology of Printing Arts - Part 5: Screen Printing Terms First Edition Graphic technology ù Prepress digital data exchange ù Tag image file format for image technology (TIFF/IT) AMENDMENT 1: Use of JBIG2-Amd2 compression in TIFF/IT Graphic Technology - Prepress Digital Data Exchange - Tag Image File Format for Image Technology (TIFF/IT) Second Edition Graphic Technology - Prepress Digital Data Exchange - CMYK Standard Colour Image Data (CMYK/SCID) First Edition; Technical Corrigendum 1: 09/15/04 Graphic technology Prepress digital data exchange Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID) First Edition Graphic technology ù Prepress digital data exchange ù Part 3: CIELAB standard colour image data (CIELAB/SCID) First Edition Graphic Technology - Prepress Digital Data Exchange - Colour Targets for Input Scanner Calibration First Edition Graphic technology - Input data for characterization of 4-colour process printing Part 1: Initial data set First Edition; Corrigendum 1:10/1/2005 Graphic technology Input data for characterization of 4-colour process printing Part 2: Expanded data set First Edition

ISO

12643-1

ISO

12643-2

ISO

12644

ISO ISO

12645 12646

ISO

12647-1

ISO

12647-2 AMD 1

ISO

12647-2

ISO

12647-3

ISO

12647-4

ISO

12647-5

ISO ISO ISO

12647-6 12650 12651

ISO

12653-1

ISO ISO ISO ISO ISO

12653-2 12656 12667 12676 12677

ISO

12678-1

Graphic technology ù Safety requirements for graphic technology equipment and systems ù Part 1: General requirements First Edition [: ISO 12648, ISO 12648, ISO 12649] Graphic technology ù Safety requirements for graphic technology equipment and systems ù Part 2: Press equipment and systems First Edition [Superseded: ISO 12648, ISO 12648] Graphic Technology - Determination of Rheological Properties of Paste Inks and Vehicles by the Falling Rod Viscometer First Edition Graphic Technology - Process Control - Certified Reference Material for Opaque Area Calibration of Transmission Densitometers First Edition Graphic technology Displays for colour proofing Characteristics and viewing conditions First Edition Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 1: Parameters and measurement methods Second Edition Graphic technology ù Process control for the production of half-tone colour separations, proof and production prints ù Part 2: Offset lithographic processes Second edition Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 2: Offset lithographic processes Second Edition Graphic technology - Process control for the production of half-tone colour separations, proofs and production prints - Part 3: Coldset offset lithography on newsprint Second Edition Graphic technology - Process control for the production of half-tone colour separations, proofs and production prints - Part 4: Publication gravure printing First Edition Graphic Technology - Process Control for the Manufacture of Half-Tone Colour Separations, Proof and Production Prints - Part 5: Screen Printing First Edition Graphic technology Process control for the production of half-tone colour separations, proofs and production prints Part 6: Flexographic printing First Edition Document Imaging Applications - Microfilming of Achromatic Maps on 35 mm Microfilm First Edition Electronic Imaging - Vocabulary Imagerie Electronique - Vocabulaire First Edition Electronic Imaging - Test Target for the Black-and-White Scanning of Office Documents - Part 1: Characteristics First Edition Electronic Imaging - Test Target for the Black-and-White Scanning of Office Documents - Part 2: Method of Use First Edition; Technical Corrigendum 1 3/1/2002 Micrographics - Use of Bar Codes on Aperture Cards First Edition Commercial Vehicles and Buses - Cross-Tooth Propeller Shaft Flanges, Type T First Edition Refractory Products - Determination of Resistance to Carbon Monoxide First Edition Chemical Analysis of Refractory Products by XRF - Fused Cast Bead Method First Edition Refractory Products - Measurement of Dimensions and External Defects of Refractory Bricks - Part 1: Dimensions and Conformity to Drawings First Edition

Refractory Products - Measurement of Dimensions and External Defects of Refractory Bricks - Part 2: Corner and Edge Defects and Other Surface Imperfections First Edition Methods of test for refractory products Part 1: Determination of dynamic Young┤s modulus (MOE) by impulse excitation of vibration First Edition Mechanically deposited coatings of zinc Specification and test methods First Edition Metallic and Other Inorganic Coatings - Automated Controlled Shot-Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel or Chromium Plating, or as a Final Finish First Edition Metallic Coatings - Porosity Tests - Humid Sulfur (Flowers of Sulfur) Test First Edition Non-Destructive Testing - Terminology - Terms Used in Penetrant Testing Essais Non Destructifs - Terminologie - Termes Utilises En Controle Par Ressuage First Edition

ISO

12678-2

ISO ISO

12680-1 12683

ISO ISO

12686 12687

ISO

12706

ISO ISO ISO

12710 12713 12714

ISO ISO ISO ISO

12715 12716 12721 12725

ISO ISO ISO

12732 12737 12739

ISO

12740

Non-Destructive Testing - Ultrasonic Inspection - Evaluating Electronic Characteristics of Ultrasonic Test Instruments First Edition Non-Destructive Testing - Acoustic Emission Inspection - Primary Calibration of Transducers First Edition Non-Destructive Testing - Acoustic Emission Inspection - Secondary Calibration of Acoustic Emission Sensors First Edition Ultrasonic Non-Destructive Testing - Reference Blocks and Test Procedures for the Characterization of Contact Search Unit Beam Profiles First Edition Non-Destructive Testing - Acoustic Emission Inspection - Vocabulary First Edition Non-Destructive Testing - Thermal Neutron Radiographic Testing - Determination of Beam L/D Ratio First Edition Nickel and Nickel Alloy Castings First Edition Corrosion of metals and alloys Electrochemical potentiokinetic reactivation measurement using the double loop method (based on ╚ihal's method) First Edition Metallic materials Determination of plane-strain fracture toughness Second Edition Zinc sulfide concentrates Determination of zinc Ion-exchange/EDTA titrimetric method Second Edition Lead Sulfide Concentrates - Determination of Silver and Gold Contents - Fire Assay and Flame Atomic Absorption Spectrometric Method Using Scorification or Cupellation First Edition

ISO

12742

Copper, lead, and zinc sulfide concentrates ù Determination of transportable moisture limits ù Flow-table method Second Edition

ISO ISO ISO

12743 12744 12745

ISO ISO ISO ISO

12756 12757-1 12757-2 12771

Copper, lead, zinc and nickel concentrates Sampling procedures for determination of metal and moisture content Second Edition Copper, lead, zinc and nickel concentrates Experimental methods for checking the precision of sampling Second Edition Copper, Lead and Zinc Ores and Concentrates - Precision and Bias of Mass Measurement Techniques First Edition Drawing and Writing Instruments - Ball Point Pens and Roller Ball Pens - Vocabulary Instruments De Dessin Et D'Ecriture - Stylos A Bille Et Stylos Rollers - Vocabulaire First Edition Ball Point Pens and Refills - Part 1: General Use First Edition Ball Point Pens and Refills - Part 2: Documentary Use (DOC) First Edition Plastics Laboratory Ware - Disposable Serological Pipettes First Edition

ISO ISO

12772 12775

ISO

12777-1

ISO ISO

12777-2 12777-3

ISO ISO ISO

12789 12790-1 12794

ISO

12795

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

12800 12803 12807 12819 12844 12853 12858-1 12858-2 12858-3 12864 12865 12866 12867 12870

ISO ISO ISO ISO ISO ISO

12884 12890 12891-1 12891-2 12891-3 12891-4

Laboratory Glassware - Disposable Microhaematocrit Capillary Tubes First Edition Guidelines on Types of Glass of Normal Bulk-Production Composition and Their Test Methods First Edition Methods of Tests for Pallet Joints - Part 1: Determination of Bending Resistance of Pallet Nails, Other Dowel-Type Fasteners and Staples First Edition Methods of Tests for Pallet Joints - Part 2: Determination of Withdrawl and Head Pull-Through Resistance of Pallet Nails and Staples First Edition Methods of test for pallet joints Part 3: Determination of strength of pallet joints First Edition Reference Neutron Radiations - Characteristics and Methods of Production of Simulated Workplace Neutron Fields First Edition Radiation Protection - Performance Criteria for Radiobioassay - Part 1: General Principles First Edition Nuclear Energy - Radiation Protection - Individual Thermoluminescence Dosemeters for Extremities and Eyes First Edition Nuclear fuel technology Uranium dioxide powder and pellets Determination of uranium and oxygen/uranium ratio by gravimetric method with impurity correction First Edition Nuclear fuel technology Guide to the measurement of the specific surface area of uranium oxide powders by the BET method First Edition Representative Sampling of Plutonium Nitrate Solutions for Determination of Plutonium Concentration First Edition Safe Transport of Radioactive Materials - Leakage Testing on Packages First Edition Methods of Evaluation of the Battery Life of a Battery-Powered Watch First Edition; Corrigendum 1: 11-01-99 Raw Optical Glass - Grindability with Diamond Pellets - Test Method and Classifiction First Edition Optics and Optical Instruments - Microscopes - Information Provided to the User First Edition Optics and Optical Instruments - Ancillary Devices for Geodetic Instruments - Part 1: Invar Levelling Staffs First Edition Optics and Optical Instruments - Ancillary Devices for Geodetic Instruments - Part 2: Tripods First Edition Optics and optical instruments Ancillary devices for geodetic instruments Part 3: Tribrachs First Edition Opthalmic Optics - Contact lenses - Determination of Scattered Light First Edition Ophthalmic instruments Retinoscopes Second Edition Ophthalmic Instruments - Perimeters First Edition; Corrected and Reprinted 12-01-1999 Ophthalmic Instruments - Trial Frames First Edition Ophthalmic optics Spectacle frames Requirements and test methods Second Edition; Replaces ISO 9456:1991 Ambient Air - Determination of Total (Gas and Particle-Phase) Polycyclic Aromatic Hydrocarbons - Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analyses First Edition Water Quality - Determination of Toxicity to Embryos and Larvae of Freshwater Fish - Semi-Static Method First Edition Retrieval and Analysis of Surgical Implants - Part 1: Retrieval and Handling First Edition Retrieval and Analysis of Surgical Implants - Part 2: Analysis of Retrieved Metallic Surgical Implants First Edition Retrieval and Analysis of Surgical Implants - Part 3: Analysis of Retrieved Polymeric Surgical Implants First Edition Retrieval and Analysis of Surgical Implants - Part 4: Analysis of Retrieved Ceramic Surgical Implants First Edition

ISO ISO

12894 12900

ISO

12917-1

ISO

12917-2

ISO

12922

ISO ISO

12925-1 12937

ISO

12944-1

ISO

12944-2

ISO

12944-3

ISO

12944-4

ISO

12944-5

ISO

12944-6

ISO

12944-7

ISO ISO

12944-8 12945-1

ISO

12945-2

ISO

12947-1

ISO

12947-2

Ergonomics of the Thermal Environment - Medical Supervision of Individuals Exposed to Extreme Hot or Cold Environments First Edition Hard Coal - Determination of Abrasiveness First Edition; Corrected and Reprinted 09/15/1998 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods First Edition Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical DistanceRanging Method First Edition Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HFAE, HFAS, HFB, HFC, HFDR and HFDU First Edition; Technical Corrigendum 1: 02/01/2001 Lubricants, Industrial Oils and Related Products (Class L) - Family C (Gears) - Part 1: Specifications for Lubricants for Enclosed Gear Systems First Edition; Corrigendum 1: 02/15/2002 Petroleum Products - Determination of Water - Coulometric Karl Fischer Titration Method First Edition Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 1: General Introduction First Edition Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 2: Classification of Environments First Edition Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 3: Design Considerations First Edition Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 4: Types of Surface and Surface Preparation First Edition Paints and varnishes ù Corrosion protection of steel structures by protective paint systems ù Part 5: Protective paint systems Second Edition Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 6: Laboratory Performance Test Methods First Edition Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 7: Execution and Supervision of Paint Work First Edition Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 8: Development of Specifications for New Work and Maintenance First Edition Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 1: Pilling Box Method First Edition Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 2: Modified Martindale Method First Edition Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 1: Martindale Abrasion Testing Apparatus First Edition; Technical Corrigendum 1; 11/01/2002 Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 2: Determination of Specimen Breakdown First Edition; Technical Corrigendum 1: 11/01/2002

ISO

12947-3

ISO ISO

12947-4 12951

ISO

12952-1

ISO

12952-2

Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 3: Determination of Mass Loss First Edition; Technical Corrigendum 1: 11/01/2002 Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 4: Assessment of Appearance Change First Edition; Technical Corrigendum 1: 11/01/02 Textile Floor Coverings - Determination of Mass Loss Using the Lisson Test First Edition Textiles - Burning Behaviour of Bedding Items - Part 1: General Test Methods for the Ignitability by a Smouldering Cigarette First Edition Textiles - Burning Behaviour of Bedding Items - Part 2: Specific Test Methods for the Ignitability by a Smouldering Cigarette First Edition

ISO

12952-3

Textiles - Burning Behaviour of Bedding Items - Part 3: General Test Methods for the Ignitability by a Small Open Flame First Edition

ISO ISO ISO ISO ISO ISO

12952-4 12956 12957-1 12957-2 12958 12965

ISO

12977

ISO

12979

ISO

12980

ISO

12981-1

ISO

12982-1

ISO

12984

ISO

12985-1

ISO

12985-2

ISO

12986-1

Textiles - Burning Behaviour of Bedding Items - Part 4: Specific Test Methods for the Ignitability by a Small Open Flame First Edition Geotextiles and Geotextile-Related Products - Determination of the Characteristic Opening Size First Edition Geosynthetics Determination of friction characteristics Part 1: Direct shear test First Edition Geosynthetics Determination of friction characteristics Part 2: Inclined plane test First Edition Geotextiles and Geotextile-Related Products - Determination of Water Flow Capacity in Their Plane First Edition Butadiene Rubber - Determination of Microstructure by Infra-Red Spectrometry First Edition; Corrigendum 1: 04/15/2006 Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Determination of Volatile Matter Content First Edition Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Determination of C/H Ratio in the QuinolineInsoluble Fraction First Edition Carbonaceous Materials Used in the Production of Aluminium - Green Coke and Calcined Coke for Electrodes - Analysis Using an XRay Fluorescence Method First Edition Carbonaceous Materials Used in the Production of Aluminium - Calcined Coke - Determination of the Reactivity to Carbon Dioxide Part 1: Loss in Mass Method First Edition Carbonaceous Materials Used in the Production of Aluminium - Calcined Coke - Determination of the Reactivity to Air - Part 1: Ignition Temperature Method First Edition Carbonaceous Materials Used in the Production of Aluminium - Calcined Coke - Determination of Particle Size Distribution First Edition Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes and Cathode Blocks - Part 1: Determination of Apparent Density Using a Dimensions Method First Edition Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes and Cathode Blocks - Part 2: Determination of Apparent Density and of Open Porosity Using a Hydrostatic Method First Edition Carbonaceous Materials Used in the Production of Aluminium - Prebaked Anodes and Cathode Blocks - Part 1: Determination of Bending/Shear Strength by a Three-Point Method First Edition

ISO

12986-2

ISO

12987

ISO

12988-1

ISO

12988-2

ISO

12989-1

ISO ISO ISO

12989-2 12992 13000-1

ISO ISO ISO ISO

13000-2 13002 13003 13006

ISO ISO ISO ISO ISO ISO ISO

13007-1 CORR 1 13007-1 13007-2 CORR 1 13007-2 13007-3 13007-4 13012

ISO

13041-1

ISO

13041-4

ISO

13041-5

Carbonaceous materials used in the production of aluminium Prebaked anodes and cathode blocks Part 2: Determination of flexural strength by the four-point method First Edition Carbonaceous materials for the production of aluminium Anodes, cathodes blocks, sidewall blocks and baked ramming pastes Determination of the thermal conductivity using a comparative method First Edition Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes - Determination of the Reactivity to Carbon Dioxide Part 1: Loss in Mass Method First Edition Carbonaceous materials used in the production of aluminium Baked anodes Determination of the reactivity to carbon dioxide Part 2: Thermogravimetric method First Edition Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes and Sidewall Blocks - Determination of the Reactivity to Air- Part 1: Loss in Mass Method First Edition Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes and Sidewall Blocks - Determination of the Reactivity to Air- Part 2: Thermogravimetric method First Edition Plastics - Vertical Flame Spread Determination for Film and Sheet First Edition Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation Second Edition Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties Second Edition Carbon Fibre - Designation System for Filament Yarns First Edition Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions First Edition Ceramic Tiles - Definitions, Classification, Characteristics and Marking First Edition Ceramic tiles ù Grouts and adhesives ù Part 1: Terms, definitions and specifications for adhesives TECHNICAL CORRIGENDUM 1 First Edition Ceramic tiles ù Grouts and adhesives ù Part 1: Terms, definitions and specifications for adhesives First Edition Ceramic tiles ù Grouts and adhesives ù Part 2: Test methods for adhesives TECHNICAL CORRIGENDUM 1 First Edition Ceramic tiles Grouts and adhesives Part 2: Test methods for adhesives First Edition Ceramic tiles Grouts and adhesives Part 3: Terms, definitions and specifications for grouts First Edition Ceramic tiles Grouts and adhesives Part 4: Test methods for grouts First Edition Rolling Bearings, Linear Motion, Recirculating Ball, Sleeve Type - Accessories First Edition; Corrigendum 1: 04/15/1999 Test conditions for numerically controlled turning machines and turning centres Part 1: Geometric tests for machines with a horizontal workholding spindle First Edition Test conditions for numerically controlled turning machines and turning centres Part 4: Accuracy and repeatability of positioning of linear and rotary axes First Edition Test conditions for numerically controlled turning machines and turning centres Part 5: Accuracy of feeds, speeds and interpolations First Edition

ISO

13041-6

Test conditions for numerically controlled turning machines and turning centres Part 6: Accuracy of a finished test piece First edition

ISO

13041-7

ISO ISO

13041-8 13050

ISO

13090-1

ISO

13091-1

ISO ISO ISO

13091-2 13200 13202

ISO

13203

ISO ISO ISO

13210 13211-1 13211-2

ISO

13212

ISO ISO

13213 13215-1

ISO

13215-2

ISO

13215-3

ISO

13216-1

ISO

13216-2

ISO ISO

13216-3 13218

Test conditions for numerically controlled turning machines and turning centres Part 7: Evaluation of contouring performance in the coordinate planes First Edition Test conditions for numerically controlled turning machines and turning centres Part 8: Evaluation of thermal distortions First Edition Curvilinear Toothed Synchronous Belt Drive Systems First Edition Mechanical Vibration and Shock - Guidance on Safety Aspects of Tests and Experiments with People - Part 1: Exposure to WholeBody Mechanical Vibration and Repeated Shock First Edition Mechanical Vibration - Vibrotactile Perception Thresholds for the Assessment of Nerve Dysfunction - Part 1: Methods of Measurement at the Fingertips First Edition Mechanical vibration Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 2: Analysis and interpretation of measurements at the fingertips First Edition Cranes - Safety Signs and Hazard Pictorials - General Principles First Edition Cranes - Measurement of Velocity and Time Parameters First Edition Chains, sprockets and accessories List of equivalent terms Cha¯ nes, roues dentÚes et accessoires Liste des termes Úquivalents Cha¯ nes, roues dentÚes et accessoires Liste des termes Úquivalents First Edition Information Technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standards Second Edition; IEEE Std 2003 Information Technology - Programming Languages - Prolog - Part 1: General Core First Edition Information Technology - Programming Languages - Prolog - Part 2: Modules First Edition Ophthalmic Optics - Contact Lens Care Products - Guidelines for Determination of Shelf-Life First Edition; Corrected and Reprinted 12-01-1999 Information Technology - Microprocessor Systems - Control and Status Registers (CSR) Architecture for Microcomputer Buses First Edition; ANSI/IEEE 1212 Road vehicles Reduction of misuse risk of child restraint systems Part 1: Forms for field studies First Edition Road Vehicles - Reduction of Misuse Risk of Child Restraint Systems - Part 2: Requirements and Test Procedures for Correct Installation (Panel Method) First Edition Road Vehicles - Reduction of Misuse Risk of Child Restraint Systems - Part 3: Prediction and Assessment of Misuse by Misuse Mode and Effect Analysis (MMEA) First Edition Road vehicles Anchorages in vehicles and attachments to anchorages for child restraint systems Part 1: Seat bight anchorages and attachments First Edition; Amendment 1: 02/15/2006; Amendment 3: 07/01/2006 Road vehicles Anchorages in vehicles and attachments to anchorages for child restraint systems Part 2: Top tether anchorages and attachments First Edition Road vehicles Anchorages in vehicles and attachments to anchorages for child restraint systems Part 3: Classification of child restraint dimensions and space in vehicle First Edition Road Vehicles - Child Restraint Systems - Report Form for Accidents Involving Child Passengers First Edition

ISO ISO

13226 CORR 1 13226

ISO

13232-1

ISO

13232-2

ISO

13232-3

ISO

13232-4

ISO

13232-5

ISO

13232-6

ISO

13232-7

ISO ISO

13232-8 13235-1

ISO ISO ISO

13235-3 13236 13238-3

ISO

13239

ISO

13240

ISO

13241

ISO

13242

ISO

13244

Rubber ù Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers TECHNICAL CORRIGENDUM 1 Second Edition Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers Second Edition Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general considerations Second Edition Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 2: Definition of impact conditions in relation to accident data Second Edition Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3: Motorcyclist anthropometric impact dummy Second Edition Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 4: Variables to be measured, instrumentation and measurement procedures Second Edition Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis Second Edition Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Fullscale impact-test procedures Second Edition Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests Second Edition Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports Second Edition Information Technology - Open Distributed Processing - Trading Function: Specification First Edition Information Technology - Open Distributed Processing - Trading Function - Part 3: Provision of Trading Function Using OSI Directory Service First Edition; Technical Corrigendum 1: 06/15/2006 Information Technology - Quality of Service: Framework First Edition Information Technology - Data Management - Part 3: IRDS Export/Import Facility First Edition Information Technology - Telecommunications and Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures Third Edition; Replaces ISO/IEC 3309, 7809, 8471, and 8885 Information Technology Document Description and Processing Languages Interchange Standard for Multimedia Interactive Documents (ISMID) First Edition; Technical Corrigendum 1: 3/15/2003 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Route Restriction Class Additional Network Feature First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Route Restriction Class Additional Network Feature First Edition Information Technology - Open Distributed Management Architecture First Edition; Amendment 1: 09/01/1999; Support Using Common Object Request Broker Architecture (CORBA)

Information Technology - Telecommunications and Information Exchange between Systems - Broadband Private Integrated Services Network - Inter-Exchange Signalling Protocol - Signalling ATM Adaptation Layer First Edition Information Technology - Telecommunications and Information Exchange between Systems - Broadband Private Integrated Services Network - Inter-Exchange Signalling Protocol - Basic Call/Connection Control First Edition

ISO

13246

ISO

13247

ISO ISO ISO ISO

13249-1 13249-2 13249-3 13249-5

Information technology ù Database languages ù SQL multimedia and application packages ù Part 1: Framework Third edition Information technology Database languages SQL multimedia and application packages Part 2: Full-Text Second Edition Information technology Database languages SQL multimedia and application packages Part 3: Spatial Third Edition Information technology Database languages SQL multimedia and application packages Part 5: Still image Second Edition

ISO ISO ISO

13249-6 13250-2 13250-3

ISO

13251

ISO ISO

13252 13253

Information technology Database languages SQL multimedia and application packages Part 6: Data mining Second Edition Information technology Topic Maps Part 2: Data model First Edition Information technology ù Topic Maps ù Part 3: XML syntax First edition [Replaced: ISO 13250, ISO 13250] Collection of graphical symbols for office equipment Collection de symboles graphiques pour matÚriel de bureau First Edition; Replaces ISO/IEC 4062 and 6329 Information Technology - Enhanced Communications Transport Service Definition First Edition; ITU-T Rec.X.605 1998; Replaces ISO 8880-1 and 8000-3: 1990 Ducted Air-Conditioners and Air-to-Air Heat Pumps - Testing and Rating for Performance First Edition

ISO

13256-1

ISO

13256-2

Water-Source Heat Pumps - Testing and Rating for Performance - Part 1: Water-to-Air and Brine-to-Air Heat Pumps First Edition Water-Source Heat Pumps - Testing and Rating for Performance - Part 2: Water-to-Water and Brine-to-Water Heat Pumps First Edition

ISO

13261-1

Sound Power Rating of Air-Conditioning and Air-Source Heat Pump Equipment - Part 1: Non-Ducted Outdoor Equipment First Edition

ISO

13261-2

Sound Power Rating of Air-Conditioning and Air-Source Heat Pump Equipment - Part 2: Non-Ducted Indoor Equipment First Edition

ISO

13276

ISO

13281

ISO

13281-2

ISO ISO ISO

13284 13287 13291

Tobacco and Tobacco Poducts - Determination of Nicotine Purity - Gravimetric Method Using Tungstosilicic Acid First Edition Industrial Automation Systems - Manufacturing Automation Programming Environment (MAPLE) - Functional Architecture First Edition Industrial Automation Systems and Integration - Manufacturing Automation Programming Environment (MAPLE) - Part 2: Services and Interfaces First Edition Fork-Lift Trucks - Fork-Arm Extentsions and Telescopic Fork Arms - Technical Characteristics and Strength Requirements First Edition Personal protective equipment Footwear Test method for slip resistance First Edition;:1993 Zinc Sulfide Concentrates - Determination of Zinc - Solvent Extraction and EDTA Titrimetric Method Second Edition

ISO ISO ISO ISO ISO ISO ISO

13292 13294 13295 13296 13297 13299 13300-1

Copper, lead, zinc and nickel concentrates - Experimental methods for checking the bias of sampling Second Edition Dental Handpieces - Dental Air-Motors First Edition Dentistry - Mandrels for rotary instruments Second Edition Diesel Engines - High-Pressure Fuel Injection Pipe Assemblies - General Requirements and Dimensions Second edition Small Craft - Electrical Systems - Alternating Current Installations Second Edition Sensory Analysis - Methodology - General Guidance for Establishing a Sensory Profile First Edition Sensory analysis General guidance for the staff of a sensory evaluation laboratory Part 1: Staff responsibilities First Edition Sensory analysis General guidance for the staff of a sensory evaluation laboratory Part 2: Recruitment and training of panel leaders First Edition Sensory Analysis - Methodology - General Guidance for Measuring Odour, Flavour and Taste Detection Thresholds by a ThreeAlternative Forced-Choice (3-AFC) Procedure First Edition Sensory analysis Methods for assessing modifications to the flavour of foodstuffs due to packaging First Edition Iron Ores - Determination of Zinc Content - Flame Atomic Absorption Spectrometric Method First Edition; Together with ISO 13311, It Cancels and Replaces ISO 8753: 1987 Iron Ores - Determination of Lead Content - Flame Atomic Absorption Spectrometric Method First Edition; Together with ISO 13310, it Cancels and Replaces ISO 8753: 1987 Iron ores Determination of potassium Flame atomic absorption spectrometric method Second Edition Iron ores Determination of sodium Flame atomic absorption spectrometric method Second Edition Determination of Particle Size Distribution by Gravitational Liquid Sedimentation Methods - Part 1: General Principles and Guidelines First Edition

ISO

13300-2

ISO ISO

13301 13302

ISO

13310

ISO ISO ISO

13311 13312 13313

ISO

13317-1

ISO

13317-2

ISO

13317-3

ISO

13318-1

ISO

13318-2

Determination of Particle Size Distribution by Gravitational Liquid Sedimentation Methods - Part 2: Fixed Pipette Method First Edition Determination of Particle Size Distribution by Gravitational Liquid Sedimentation Methods - Part 3: X-Ray Gravitational Technique First Edition Determination of Particle Size Distribution by Centrifugal Liquid Sedimentation Methods - Part 1: General Principles and Guidelines First Edition Determination of particle size distribution by centrifugal liquid sedimentation methods ù Part 2: Photocentrifuge method Second Edition

ISO ISO ISO ISO ISO ISO ISO

13318-3 13319 13320-1 13321 13322-1 13322-2 13325

Determination of particle size distribution by centrifugal liquid sedimentation methods Part 3: Centrifugal X-ray method First Edition Determination of particle size distributions ù Electrical sensing zone method Second Edition Particle Size Analysis - Laser Diffraction Methods - Part 1: General Principles First Edition Particle Size Analysis - Photon Correlation Spectroscopy First Edition Particle size analysis Image analysis methods Part 1: Static image analysis methods First Edition Particle size analysis Image analysis methods Part 2: Dynamic image analysis methods First Edition Tyres - Coast-by Methods for Measurement of Tyre-to-Road Sound Emission First Edition

ISO ISO ISO

13326 13328 13331

ISO ISO

13332 13333

ISO ISO ISO ISO ISO ISO ISO

13335-1 13337 13338 13340 13341 13342 13344

ISO

13346-1

ISO

13346-2

ISO

13346-3

ISO

13346-4

ISO

13346-5

ISO

13347-1 CORR 1

ISO

13347-1

ISO

13347-2 CORR 1

ISO

13347-2

ISO

13347-3 CORR 1

Test Methods for Measuring Tyre Uniformity First Edition Motorcycle Tyres - Measurement of Tyre Rolling Cirumference - Loaded New Tyres First Edition Road Vehicles - Filler Pipes and Openings of Motor Vehicle Fuel Tanks - Vapour Recovery System First Edition Reciprocating Internal Combustion Engines - Test Code for the Measurement of Structure-Borne Noise Emitted From High-Speed and Medium-Speed Reciprocating Internal Combustion Engines Measured at the Engine Feet First Edition Earth-Moving Machinery - Dumper Body Support and Operators Cab Tilt Support Devices First Edition Information technology Security techniques Management of information and communications technology security Part 1: Concepts and models for information and communications technology security management First Edition; Cancels and Replaces ISO/IEC TR 1335-1:1996 and ISO/IEC TR 13335-2:1997 Spring-Type Straight Pins - Slotted, Light Duty First Edition Determination of Tissue Corrosiveness of a Gas or Gas Mixture First Edition Transportable Gas Cylinders - Cylinder Valves for Non-Refillable Cylinders - Specification and Prototype Testing First Edition Transportable Gas Cylinders - Fitting of Valves to Gas Cylinders First Edition; Technical Corrigendum 1: 1998 Small Craft - Static Thrust Measurement for Outboard Motors First Edition Estimation of the lethal toxic potency of fire effluents Second Edition Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 1: General First Edition Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 2: Volume and Boot Block Recognition First Edition Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 3: Volume Structure Second Edition Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 4: File Structure Second Edition Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 5: Record Structure First Edition Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 1: General overview TECHNICAL CORRIGENDUM 1 First Edition Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 1: General overview First Edition Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 2: Reverberant room method TECHNICAL CORRIGENDUM 1 First Edition Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 2: Reverberant room method First Edition Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 3: Enveloping surface methods TECHNICAL CORRIGENDUM 1 First Edition

Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 3: Enveloping surface methods First Edition Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 4: Sound intensity method TECHNICAL CORRIGENDUM 1 First Edition Industrial fans ù Determination of fan sound power levels under standardized laboratory conditions ù Part 4: Sound intensity method First Edition Industrial fans ù Tolerances, methods of conversion and technical data presentation Second Edition Industrial Fans - Vocabulary and Definitions of Categories First Edition Industrial Fans - Performance Testing of Jet Fans First Edition Industrial Fans - Dimensions First Edition Packaging - Complete, Filled Transport Packages and Unit Loads - Vertical Random Vibration Test First Edition

ISO

13347-3

ISO

13347-4 CORR 1

ISO ISO ISO ISO ISO ISO

13347-4 13348 13349 13350 13351 13355

ISO

13356

ISO ISO ISO

13357-1 13357-2 13358

ISO ISO ISO ISO

13359 13362 13363 13366-1

ISO ISO ISO

13366-2 13370 13372

ISO

13373-1

ISO

13373-2

ISO

13374-1

ISO

13374-2

Condition Monitoring and Diagnostics of Machines - Vibration Condition Monitoring - Part 1: General Procedures First Edition Condition monitoring and diagnostics of machines Vibration condition monitoring Part 2: Processing, analysis and presentation of vibration data First Edition Condition Monitoring and Diagnostics of Machines - Data Processing, Communication and Presentation - Part 1: General Guidelines First Edition Condition monitoring and diagnostics of machines ù Data processing, communication and presentation ù Part 2: Data processing First Edition

ISO

13379

Condition monitoring and diagnostics of machines General guidelines on data interpretation and diagnostics techniques First Edition

Implants for Surgery - Ceramic Materials Based on Yttria-Stabilized Tetragonal Zirconia (Y-TZP) First Edition; BS 7253: Part 6: 1997 Petroleum Products - Determination of the Filterability of Lubricating Oils - Part 1: Procedure for Oils in the Presence of Water First Edition Petroleum products Determination of the filterability of lubricating oils Part 2: Procedure for dry oils Second Edition Water Quality - Determination of Easily Released Sulfide First Edition Measurement of Conductive Liquid Flow in Closed Conduits - Flanged Electromagnetic Flowmeters - Overall Length First Edition Flexible Cellular Polymeric Materials - Determination of Compression Set Under Humid Conditions First Edition Rubber and plastics hoses for marineengine wet-exhaust systems Specification First Edition Milk - Enumeration of Somatic Cells - Part 1: Microscopic Method First Edition Milk Enumeration of somatic cells Part 2: Guidance on the operation of fluoro-opto-electronic counters Second Edition; Supersedes ISO 13366-3: 1997 Thermal Performance of Buildings - Heat Transfer Via the Ground - Calculation Methods First Edition Condition monitoring and diagnostics of machines Vocabulary First Edition

ISO ISO

13380 13381-1

ISO

13395

Condition Monitoring and Diagnostics of Machines - General Guidelines on Using Performance Parameters First Edition Condition monitoring and diagnostics of machines Prognostics Part 1: General guidelines First Edition Water Quality - Determination of Nitrite Nitrogen and Nitrate Nitrogen and the Sum of Both by Flow Analysis (CFA and FIA) and Spectrometric Detection First Edition

ISO ISO ISO ISO ISO

13397-1 13397-2 13397-3 13397-4 13398

Periodontal Curettes, Dental Scalers and Excavators - Part 1: General Requirements First Edition (CEN EN ISO 13 397-1: 1995) Dentistry Periodontal curettes, dental scalers and excavators Part 2: Periodontal curettes of Gr-type Second Edition Periodontal Curettes, Dental Scalers and Excavators - Part 3: Dental Scalers - H-Type First Edition Periodontal Curettes, Dental Scalers and Excavators - Part 4: Dental Excavators - Discoid Type First Edition Refrigerated Light Hydrocarbon Fluids - Liquefied Natural Gas - Procedure for Custody Transfer on Board Ship First Edition

ISO

13399-1

ISO

13402

ISO ISO

13403 13404

ISO

13405-1

ISO

13405-2

ISO ISO

13405-3 13406-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

13406-2 13407 13408-1 13408-2 13408-3 13408-4 13408-5 13408-6 13411 13412 13413

Cutting tool data representation and exchange Part 1: Overview, fundamental principles and general information model First Edition Surgical and Dental Hand Instruments - Determination of Resistance Against Autoclaving, Corrosion and Thermal Exposure First Edition Information Technology - Information Interchange on 300 mm Optical Disk Cartridges of the Write Once, Read Multiple (WORM) Type Using the CCS Method First Edition Prosthetics and orthotics ù Categorization and description of external orthoses and orthotic components First Edition Prosthetics and Orthotics - Classification and Description of Prosthetic Components - Part 1: Classification of Prosthetic Components First Edition Prosthetics and Orthotics - Classification and Description of Prosthetic Components - Part 2: Description of Lower-Limb Prosthetic Components First Edition Prosthetics and Orthotics - Classification and Description of Prosthetic Components - Part 3: Description of Upper-Limb Prosthetic Components First Edition Ergonomic Requirements for Work with Visual Displays Based on Flat Panels - Part 1: Introduction First Edition Ergonomic Requirements for Work with Visual Displays Based on Flat Panels - Part 2: Ergonomic Requirements for Flat Panel Displays First Edition Human-Centered Design Processes for Interactive Systems First Edition Aseptic Processing of Health Care Products - Part 1: General Requirements First Edition Aseptic Processing of Health Care Products - Part 2: Filtration First Edition Aseptic processing of health care products Part 3: Lyophilization First Edition Aseptic processing of health care products Part 4: Clean-in-place technologies First Edition Aseptic processing of health care products Part 5: Sterilization in place First Edition Aseptic processing of health care products Part 6: Isolator systems First Edition Aerospace - Airframe Needle Roller, Cylindrical Roller and Track Roller Bearings - Technical Specification First Edition Aerospace - Airframe Needle Track Roller, Yoke Type, Singled-Row, Sealed - Inch Series First Edition Aerospace - Airspace Needle Track Roller, Yoke Type, Double-Row, Sealed - Inch Series First Edition

ISO ISO ISO ISO ISO

13414 13415 13416 13417 13419

ISO ISO

13420 13421

ISO ISO ISO ISO ISO ISO ISO

13422 13426-1 13426-2 13427 13428 13431 13433

ISO

13437

ISO ISO ISO ISO ISO

13438 13440 13441-1 13441-2 13443

ISO

13445

ISO

13448-1

ISO

13448-2

ISO ISO ISO ISO

13450 13457 13459 13460

Aerospace - Airframe Needle Roller Bearings, Single-Row, Shielded - Inch Series First Edition Aerospace - Airframe Needle Track Roller, Stud Type, Single-Row, Sealed - Inch Series First Edition Aerospace - Airframe Needle Track Roller, Yoke Type, Single-Row, Sealed - Metric Series First Edition Aerospace - Airframe Needle Track Roller, Stud Type, Single-Row, Sealed - Metric Series First Edition Space data and information transfer systems - packet telemetry Second Edition Space Data and Information Transfer Systems - Advanced Orbiting Systems - Networks and Data Links - Architectural Specification First Edition Information Technology - Data Interchange on 12,7 mm, 48-Track Magnetic Tape Cartridges - DLT 1 Format First Edition Information Technology - Data Interchange on 90 mm Flexible Disk Cartridges 10 MByte Capacity Using Sector Servo Tracking - ISO Type 304 First Edition Geotextiles and Geotextile-Related Products - Strength of Internal Structural Junctions - Part 1: Geocells First Edition Geotextiles and geotextile-related products Strength of internal structural junctions Part 2: Geocomposites First edition Geotextiles and Geotextile-Related Products - Abrasion Damage Simulation (Sliding Block Test) First Edition Geosynthetics Determination of the protection efficiency of a geosynthetic against impact damage First Edition Geotextiles and Geotextile-Related Products - Determination of Tensile Creep and Creep Rupture Behaviour First Edition Geotextiles and Geotextile-Related Products - Determination of Tensile Creep and Creep Rupture Behaviour First Edition Geotextiles and Geotextile-Related Products - Method for Installing and Extracting Samples in Soil, and Testing Specimens in Laboratory First Edition Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation First Edition; Supersedes ISO TR 13438 Equipment for Crop Protection - Agricultural Sprayers - Determination of the Volume of Total Residual First Edition Air-Assisted Agricultural Sprayers - Data Sheets - Part 1: Typical Layout First Edition Air-Assisted Agricultural Sprayers - Data Sheets - Part 2: Technical Specifications Related to Components First Edition Natural Gas - Standard Reference Conditions First Edition Adhesives - Determination of Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method First Edition Second Edition Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 1: Guidelines for the APP approach First Edition Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 2: Coordinated single sampling plans for acceptance sampling by attributes First Edition Photography - 110-Size Cartridge, Film and Backing Paper - Dimensions First Edition; Replaces ISO 7374, 7330 and 7261; Corrigendum 1: 9/1/2001 Agricultural Irrigation Equipment - Water-Driven Chemical Injector Pumps First Edition Earth-Moving Machinery - Dumpers - Trainer Seat/Enclosure First Edition Agricultural Irrigation Equipment - Plastics Saddles for Polyethylene Pressure Pipes First Edition

ISO

13463

ISO ISO

13464 13465

ISO

13468-1

Nuclear-Grade Plutonium Dioxide Powder for Fabrication of Light Water Reactor MOX Fuel - Guidelines to Help in the Definition of a Product Specification First Edition Simultaneous Determination of Uranium and Plutonium in Dissolver Solutions from Reprocessing Plants - Combined Method Using KAbsorption Edge and X-ray Fluorescence Spectrometry First Edition Determination of Neptunium in Nitric Acid Solutions by Molecular Absorption Spectrophotometry First Edition Plastics - Determination of the Total Luminous Transmittance of Transparent Materials - Part 1: Single-Beam Instrument First Edition CEN EN ISO 13 468-1: 1996

ISO

13468-2

Plastics - Determination of the Total Luminous Transmittance of Transparent Materials - Part 2: Double-Beam Instrument First Edition

ISO ISO

13472-1 13473-1

ISO

13473-2

Acoustics - Measurement of Sound Absorption Properties of Road Surfaces in Situ - Part 1: Extended Surface Method First Edition Characterization of Pavement Texture by Use of Surface Profiles - Part 1: Determination of Mean Profile Depth First Edition Characterization of Pavement Texture by use of Surface Profiles - Part 2: Terminology and Basic Requirements Related to Pavement Texture Profile Analysis First Edition

ISO

13473-3

ISO

13475-1

ISO

13476

ISO

13477

ISO

13478

ISO ISO

13479 13480

Road Vehicles - Ignition Coils - Electrical Characteristics and Test Methods First Edition; Technical Corrigendum 1: 04-01-1999 Thermoplastics Pipes for the Conveyance of Fluids - Determination of Resistance to Rapid Crack Propagation (RCP) - Small-Scale Steady-State Test (S4 Test) First Edition Thermoplastics pipes for the conveyance of fluids ù Determination of resistance to rapid crack propagation (RCP) ù Full-scale test (FST) Second Edition Polyolefin Pipes for the Conveyance of Fluids - Determination of Resistance to Crack Propagation - Test Method for Slow Crack Growth on Notched Pipes (Notch Test) First Edition Polyethylene Pipes - Resistance to Slow Crack Growth - Cone Test Method First Edition

ISO ISO

13481 13485

Information Technology - Data Interchange on 130 mm Optical Disk Cartridges - Capacity: 1 Gigabyte per Cartridge First Edition Medical devices Quality management systems Requirements for regulatory purposes Second Edition

ISO ISO

13486-1 13488

ISO

13490-1

Characterization of pavement texture by use of surface profiles Part 3: Specification and classification of profilometers First edition Acoustics - Stationary Audible Warning Devices Used Outdoors - Part 1: Field Measurements for Determination of Sound Emission Quantities First Edition

Road Vehicles - Hydraulic Braking Systems - Part 1: Double-Flare Pipes, Tapped Holes, Male Fittings and Tube Seats First Edition Quality Systems - Medical Devices - Particular Requirements for the Application of ISO 9002 First Edition Information Technology - Volume and File Structure of Read-Only and Write-Once Compact Disk Media for Information Interchange Part 1: General First Edition

ISO ISO

13490-2 13491-1

ISO ISO ISO ISO ISO ISO

13491-2 13492 13493 13496 13500 13501

ISO

13503-1

ISO

13503-2

ISO ISO

13503-3 CORR 1 13503-3

ISO

13503-4

ISO ISO ISO

13503-5 13520 13521

ISO

13522-1

ISO

13522-3

ISO

13522-4

ISO

13522-5

ISO

13522-6

ISO

13522-7

Information Technology - Volume and File Structure of Read-Only and Write-Once Compact Disk Media for Information Interchange Part 2: Volume and File Structure First Edition Banking ù Secure cryptographic devices (retail) ù Part 1: Concepts, requirements and evaluation methods Second Edition Banking Secure cryptographic devices (retail) Part 2: Security compliance checklists for devices used in financial transactions Second Edition Banking - Key Management Related Data Element (Retail) First Edition Meat and Meat Products - Determination of Chloramphenicol Content - Method Using Liquid Chromatography First Edition Meat and Meat Products - Detection of Colouring Agents - Method Using Thin-Layer Chromatography First Edition Petroleum and natural gas industries Drilling fluid materials Specifications and tests Second Edition Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation First Edition Petroleum and natural gas industries Completion fluids and materials Part 1: Measurement of viscous properties of completion fluids First edition Petroleum and natural gas industries Completion fluids and materials Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations First Edition Petroleum and natural gas industries ù Completion fluids and materials ù Part 3: Testing of heavy brines TECHNICAL CORRIGENDUM 1 First Edition Petroleum and natural gas industries ù Completion fluids and materials ù Part 3: Testing of heavy brines First Edition Petroleum and natural gas industries Completion fluids and materials Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions First Edition Petroleum and natural gas industries Completion fluids and materials Part 5: Procedures for measuring the long-term conductivity of proppants First Edition Determination of Ferrite Content in Austenitic Stainless Steel Castings First Edition Austenitic Manganese Steel Castings First Edition Information Technology - Coding of Multimedia and Hypermedia Information - Part 1: MHEG Object Representation - Base Notation (ASN.1) First Edition Information Technology - Coding of Multimedia and Hypermedia Information - Part 3: MHEG Script Interchange Representation First Edition Information Technology - Coding of Multimedia and Hypermedia Information - Part 4: MHEG Registration Procedure First Edition Information Technology - Coding of Multimedia and Hypermedia Information - Part 5: Support for Base-Level Interactive Applications First Edition; Technical Corrigendum 1: 10-15-1999 Information Technology - Coding of Multimedia and Hypermedia Information - Part 6: Support for Enhanced Interactive Applications First Edition Information Technology - Coding of Multimedia and Hypermedia Information - Part 7: Interoperability and Conformance Testing for ISO/IEC 13522-5 First Edition

ISO ISO

13522-8 13528

ISO

13533

ISO

13534

ISO

13535

ISO ISO ISO ISO ISO

13536 13539 13542 13543 13545

Information Technology - Coding of Multimedia and Hypermedia Information - Part 8: XML Notation for ISO/IEC 13522-5 First Edition Statistical methods for use in proficiency testing by interlaboratory comparisons First Edition Petroleum and Natural Gas Industries - Drilling and Production Equipment - Drill-Through Equipment First Edition; Corrigendum 1: 1/15/2005 Petroleum and Natural Gas Industries - Drilling and Production Equipment - Inspection, Maintenance, Repair and Remanufacture of Hoisting Equipment First Edition /Cobranded with API RP 8B Petroleum and Natural Gas Industries - Drilling and Production Equipment - Hoisting Equipment First Edition/ Cobranded with API SPEC 8C Soil Quality - Determination of the Potential Cation Exchange Capacity and Exchangeable Cations Using Barium Chloride Solution Buffered at pH = 8,1 First Edition Earth-Moving Machinery - Trenchers - Definitions and Commercial Specifications First Edition Paper and board Specification for internal diameters of cores for reels Second Edition Copper, Lead and Zinc Sulfide Concentrates - Determination of Mass of Contained Metal in a Lot First Edition Lead Sulfide Concentrates - Determination of Lead Content - EDTA Titration Method after Acid Digestion First Edition

ISO

13549

Information Technology - Data Interchange on 130 mm Optical Disk Cartridges - Capacity: 1,3 Gigabytes per Cartridge First Edition

ISO

13550

Hydrometric Determination - Flow Measurements in Open Channels Using Structures - Use of Vertical Underflow Gates First Edition

ISO

13552

ISO

13553

Textile Machinery and Accessories - Cloth Rollers - Specification for Connections for Automation of Roller Changing First Edition Textile Machinery and Accessories - Weaver┤s Beams - Specification for Connections for Automation of Beam Changing First Edition

ISO

13555-1

Diesel engines Procedure for checking the dynamic timing of diesel fuel injection equipment Part 1: Preconditioning First Edition

ISO

13555-2

ISO ISO

13555-3 13556

ISO ISO

13559 13562-1

ISO ISO

13562-2 13563-1

Diesel engines Procedure for checking the dynamic timing of diesel fuel injection equipment Part 2: Test method First Edition Diesel engines Procedure for checking the dynamic timing of diesel fuel injection equipment Part 3: Validation of timing measurement devices First Edition Road Vehicles - Localization of Exhaust System Leaks and Equipment Specifications First Edition Butter, Fermented Milks and Fresh Cheese - Enumeration of Contaminating Microorganisms - Colony-Count Technique at 30 Degrees Celcius First Edition Industrial Variable-Reach Trucks - Part 1: Stability Tests First Edition Industrial Variable-Reach Trucks - Part 2: Additional Stability Tests for Trucks Handling Freight Containers of Length 6 m and Above First Edition Single Side Loading Fork-Lift Trucks - Part 1: Stability Tests First Edition

Single Side Loading Fork-Lift Trucks - Part 2: Additional Stability Tests for Trucks Handling Freight Containers of 6 m Length and Above First Edition Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties - Part 1: Filtering and General Measurement Conditions First Edition; Technical Corrigendum 1-1998

ISO

13563-2

ISO

13565-1

ISO

13565-2

ISO ISO

13565-3 13567-1

ISO

13567-2

ISO ISO ISO

13568 CORR 1 13568 13571

ISO ISO ISO ISO ISO

13575 13580 13583-1 13583-2 13584-1

Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties - Part 2: Height Characterization Using the Linear Material Ratio Curve First Edition; Technical Corrigendum 1-1998 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties - Part 3: Height Characterization Using the Material Probability Curve First Edition Technical Product Documentation and Naming of Layers for CAD - Part 1: Overview and Principles First Edition Technical Product Documentation - Organization and Naming of Layers for CAD - Part 2: Concepts, Format and Codes Used in Construction Documentation First Edition Information technology ù Z formal specification notation ù Syntax, type system and semantics ù TECHNICAL CORRIGENDUM 1 First Edition Information Technology - Z Formal Specification Notation - Syntax, Type System and Semantics First Edition Life-threatening components of fire ù Guidelines for the estimation of time available for escape using fire data First Edition Information Technology - Telecommunications and Information Exchange between Systems - 50-Pole Interface Connector Mateability Dimensions and Contact Number Assignments First Edition Yogurt Determination of total solids content (Reference method) First edition Centrifugally Cast Steel and Alloy Products - Part 1: General testing and Tolerance First Edition Centrifugally cast steel and alloy products Part 2: Heat resistant materials First Edition Industrial Automation Systems and Integration - Parts Library - Part 1: Overview and Fundamental Principles First Edition

ISO

13584-20

Industrial Automation Systems and Integration - Parts Library - Part 20: Logical Resource: Logical Model of Expressions First Edition

ISO

13584-24

ISO

13584-25

ISO

13584-26

ISO

13584-31

ISO

13584-42

ISO

13584-101

Industrial automation systems and integration Parts library Part 24: Logical resource: Logical model of supplier library First Edition Industrial automation systems and integration Parts library Part 25: Logical resource: Logical model of supplier library with aggregate values and explicit content First Edition Industrial Automation Systems and Integration - Parts Library - Part 26: Logical Resource: Information Supplier Identification First Edition Industrial Automation Systems and Integration - Parts Library - Part 31: Implementation Resources: Geometric Programming Interface First Edition Industrial Automation Systems and Integration - Parts Library - Part 42: Description Methodology: Methodology for Structuring Part Families First Edition; Technical Corrigendum 1: 01/15/2003 Industrial automation systems and integration Parts library Part 101: Geometrical view exchange protocol by parametric Program First Edition

ISO

13584-102

ISO

13584-501

ISO

13584-511

ISO

13586

ISO ISO ISO ISO

13589 13590 13591 13592

ISO

13595

Industrial automation systems and integration Parts library Part 102: View exchange protocol by ISO 10303 conforming specification First Edition Industrial automation systems and integration ù Parts library ù Part 501: Reference dictionary for measuring instruments ù Registration procedure First Edition Industrial automation systems and integration Parts library Part 511: Mechanical systems and components for general use Reference dictionary for fasteners First Edition Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach AMENDMENT 1: Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres First Edition; Amendment 1:6/1/2003 Aerospace - Nuts, Bihexagonal, Self-Locking, with Counterbore and MJ Threads, Classifications: 1 100 MPa (at Ambient Temp)/425 Deg C, 1 100 MPa (at Ambient Temp)/650 Deg C, 1 210 MPa (at Ambient Temp)/425 Deg C, 1 210 MPa (at Ambient Temp)/730 Deg C, 1 550 MPa (at Ambient Temp)/235 Deg C, 1 550 MPa (at Ambient Temp)/425 Deg C and 1 550 MPa (at Ambient Temp)/600 Deg C - Dimensions First Edition Small craft Personal watercraft Construction and system installation requirements Second Edition Small Craft - Portable Fuel Systems for Outboard Motors First Edition Small Craft - Backfire Flame Control for Petrol Engines First Edition Aerospace - Inserts, with Self-Locking Floating Nut, with MJ Threads, in Metallic Material, Coated or Uncoated - Dimensions First Edition

ISO

13596

Aerospace - Inserts, Self-Locking, with MJ Threads, Closed Type, in Metallic Material, Coated or Uncoated - Dimensions First Edition

ISO

13597

ISO ISO ISO ISO ISO ISO

13598 13599 13600 13601 13602-1 13602-2

ISO

13614

ISO

13616-1

ISO ISO

13616-2 13617

Aerospace - Inserts, Self-Locking, with MJ Threads, Open Type, in Metallic Material, Coated or Uncoated - Dimensions First Edition Aerospace - Inserts, Self-Locking, with MJ Threads, Reduced Flanges, Closed Type, in Metallic Material, Coated or Uncoated Dimensions First Edition Aerospace - Inserts, with Clearance Hole, in Metallic Material, Coated or Uncoated - Dimensions First Edition Technical Energy Systems - Basic Concepts First Edition; Technical Corrigendum 1-1998 Technical Energy Systems - Structure for Analysis - Energyware Supply and Demand Sectors First Edition Technical Energy System - Methods for Analysis - Part 1: General First Edition Technical energy systems - Methods for analysis - Part 2: Weighting and aggregation of energywares First Edition Information Technology - Interchange on 300 mm Optical Disk Cartridges of the Write Once, Read Multiple (WORM) Type Using the SSF Method First Edition Financial services ù International bank account number (IBAN) ù Part 1: Structure of the IBAN First Edition [Superseded: ISO 13616, ISO 13616] Financial services ù International bank account number (IBAN) ù Part 2: Role and responsibilities of the Registration Authority First Edition [Superseded: ISO 13616, ISO 13616] Ships and Marine Technology - Shipboard Incinerators - Requirements Second Edition

ISO

13623

ISO ISO

13625 13626

ISO

13628-1

ISO

13628-2

ISO

13628-3

ISO

13628-4

ISO

13628-5

ISO

13628-6

ISO

13628-7

ISO

13628-8 CORR 1

ISO

13628-8

ISO

13628-9

ISO

13628-10

ISO ISO ISO ISO ISO

13628-11 13631 13638 13640 13641-1

ISO ISO

13641-2 13642

Petroleum and Natural Gas Industries - Pipeline Transportation Systems First Edition Petroleum and natural gas industries Drilling and production equipment Marine drilling riser couplings First Edition; Corrected Version: 06/15/2003 Petroleum and natural gas industries Drilling and production equipment Drilling and well-servicing structures First Edition Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations Second Edition Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications Second Edition Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems Part 3: Through Flowline (TFL) Systems First Edition/ Cobranded with API RP 17C Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 4: Subsea Wellhead and Tree Equipment First Edition Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 5: Subsea Umbilicals First Edition/ Cobranded with API SPEC 17E Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems Second Edition; Cobranded with API SPEC 17F Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems First Edition Petroleum and natural gas industries ù Design and operation of subsea production systems ù Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems TECHNICAL CORRIGENDUM 1 First Edition Petroleum and natural gas industries ù Design and operation of subsea production systems ù Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems First Edition Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 9: Remotely Operated Tool (ROT) Intervention Systems First Edition Petroleum and natural gas industries Design and operation of subsea production systems Part 10: Specification for bonded flexible pipe First Edition Petroleum and natural gas industries ù Design and operation of subsea production systems ù Part 11: Flexible pipe systems for subsea and marine applications First Edition [Superseded: ISO 10420] Petroleum and Natural Gas Industries - Packaged Reciprocating Gas Compressors First Edition Building Construction - Sealants - Determination of Resistance to Prolonged Exposure to Water First Edition Building Construction - Jointing Products - Specifications for Test Substrates First Edition Water Quality - Determination of Inhibition of Gas Production of Anaerobic Bacteria - Part 1: General Test First Edition Water Quality - Determination of Inhibition of Gas Production of Anaerobic Bacteria - Part 2: Test for Low Biomass Concentration First Edition Information Technology - Elements of Management Information Related to the OSI Physical Layer Second Edition

ISO ISO

13653 13655

ISO

13656

ISO

13658

ISO

13660

ISO

13663

ISO

13664

ISO ISO

13665 13666

ISO ISO ISO

13673 13674-1 13674-2

ISO ISO

13678 DIS 13678

ISO

13679

ISO ISO

13680 13681

ISO ISO ISO ISO ISO

13685 13686 13688 13690 13691

Optics and Optical Instruments - General Optical Test Methods - Measurement of Relative Irradiance in the Image Field First Edition Graphic Technology - Spectral Measurement and Colorimetric Computation for Graphic Arts Images First Edition Graphic Technology - Application of Reflection Densitometry and Colorimetry to Process Control or Evaluation of Prints and Proofs First Edition Zinc Sulfide Concentrates - Determination of Zinc Content - Hydroxide Precipitation and EDTA Titrimetric Method First Edition Information Technology - Office Equipment - Measurement of Image Quality Attributes for Hardcopy Output - Binary Monochrome Text and Graphic Images First Edition Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of the Area Adjacent to the Weld Seam for the Detection of Laminar Imperfections First Edition Seamless and Welded Steel Tubes for Pressure Purposes - Magnetic Particle Inspection of the Tube Ends for the Detection of Laminar Imperfections First Edition Seamless and Welded Steel Tubes for Pressure Purposes - Magnetic Particle Inspection of the Tube Body for the Detection of Surface Imperfections First Edition Ophthalmic Optics - Spectacle Lenses - Vocabulary Optique Ophtalmique - Verres De Lunettes - Vocabularie First Edition Information Technology - Document Processing and Related Communication - Conformance Testing for Standard Generalized Markup Language (SGML) Systems First Edition Road Vehicles - Test Method for the Quantification of On-Centre Handling - Part 1: Weave Test First Edition Road vehicles Test method for the quantification of on-centre handling Part 2: Transition test First Edition Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe Cobranded with API RP 5A3; Technical Corrigendum 1: 10/15/2005 Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe Petroleum and natural gas industries - Procedures for testing casing and tubing connections First Edition/ Cobranded with API RP 5C5 Petroleum and Natural Gas Industries - Corrosion-Resistant Alloy Seamless Tubes for Use as Casing, Tubing and Coupling Stock Technical Delivery Conditions First Edition; Technical Corrigendum 2:5/1/2004; (Technical Corrigendum 1 in French Only) Meat and Meat Products - Enumeration of Yeasts and Moulds - Colony- Count Technique First Edition Ginger and Its Oleoresins - Determination of the Main Pungent Components (Gingerols and Shogaols) - Method Using HighPerformance Liquid Chromatography First Edition Natural Gas - Quality Designation First Edition Protective Clothing - General Requirements First Edition Cereals, Pulses and Milled Products - Sampling of Static Batches First Edition [Superseded: ISO 951, ISO 950, ISO 2170] Petroleum and Natural Gas Industries - High-Speed Special-Purpose Gear Units First Edition

Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Methods for Laser Beam Power (Energy) Density Distribution First Edition; Technical Corrigendum 1: 11/01/2005

ISO

13694

ISO ISO

13695 13696

ISO

13697

ISO

13702

ISO

13703

ISO ISO ISO ISO ISO ISO ISO ISO

13704 FDIS 13704 13705 13706 13707 13709 DIS 13709 13710

ISO

13712-1

ISO

13712-2

ISO

13712-3

ISO ISO ISO ISO

13714 13715 13716 13719-1

Optics and photonics Lasers and laser-related equipment Test methods for the spectral characteristics of lasers First Edition Optics and Optical Instruments - Test Methods for Radiation Scattered by Optical Components First Edition Optics and photonics Lasers and laser-related equipment Test methods for specular reflectance and regular transmittance of optical laser components First Edition Petroleum and Natural Gas Industries - Control and Mitigation of Fires and Explosions on Offshore Production Installations Requirements and Guidelines First Edition Petroleum and Natural Gas Industries - Design and Installation of Piping Systems on Offshore Production Platforms First Edition; Technical Corrigendum 1: 07/01/2002 Petroleum and Natural Gas Industries - Calculation of Heater-Tube Thickness in Petroleum Refineries First Edition; Cobranded with API STD 530; Corrigendum 1: 01-15-2004 Petroleum, petrochemical and natural gas industries - Calculation of heater-tube thickness in petroleum refineries Petroleum, petrochemical and natural gas industries Fired heaters for general refinery service Second Edition Petroleum, petrochemical and natural gas industries Air-cooled heat exchangers Second Edition Petroleum and Natural Gas Industries - Reciprocating Compressors First Edition Centrifugal pumps for petroleum, petrochemical and natural gas industries First Edition Centrifugal pumps for petroleum, petrochemical and natural gas industries Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps First Edition Information Technology - Remote Operations: Concepts, Model and Notation First Edition; (Corrigendum 1-1996) (Amendment 11996) Information Technology - Remote Operations: OSI Realizations - Remote Operations Service Element (ROSE) Service Definition First Edition; (Corrected and Reprinted - 1995) (Amendment 1-1996) Information Technology - Remote Operations: OSI Realizations - Remote Operations Service Element (ROSE) Protocol Specification First Edition; (Corrected and Reprinted - 1995) (Amendment 1-1996) Information Technology - Document Processing and Related Communication - User Interface to Telephone-Based Services - Voice Messaging Applications First Edition Technical Drawings - Edges of Undefined Shape - Vocabulary and Indications Second Edition Dentistry - Reversible-Irreversible Hydrocolloid Impression Material Systems First Edition Information Technology - Portable Common Tool Environment (PCTE) - Part 1: Abstract Specification Second Edition

ISO

13719-2

Information Technology - Portable Common Tool Environment (PCTE) - Part 2: C Programming Language Binding Second Edition

ISO

13719-3

Information Technology - Portable Common Tool Environment (PCTE) - Part 3: Ada Programming Language Binding Second Edition

ISO ISO ISO

13719-4 13720 13722

ISO ISO

13726 13730

ISO

13731

ISO

13732-3

ISO ISO ISO

13734 13736 13737

ISO

13738

ISO

13740

ISO

13741-1

ISO ISO ISO

13741-2 13746 13750

ISO

13751

ISO

13752

ISO ISO

13753 13754

ISO

13756

Information Technology - Portable Common Tool Environment (PCTE) - Part 4: IDL Binding (Interface Definition Language) First Edition Meat and Meat Products - Enumeration of Pseudomonas Spp. First Edition Meat and Meat Products - Enumeration of Brochothrix thermosphacta - Colony-Count Technique First Edition Hydraulic Fluid Power - Single Rod Cylinders, 16 MPa (160 Bar) Compact Series with Bores from 250 mm to 500 mm - Accessory Mounting Dimensions First Edition Meat and Meat Products - Determination of Total Phosphorus Content - Spectrometric Method First Edition Ergonomics of the Thermal Environment - Vocabulary and Symbols Ergonomie des Ambiances Thermiques - Vocabulaire et Symboles First Edition Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces First Edition Natural Gas - Organic Sulfur Compounds Used as Odorants - Requirements and Test Methods First Edition; Technical Corrigendum 1 07/01/1999 Petroleum Products and Other Liquids - Determination of Flash Point - Abel Closed Cup Method First Edition Petroleum products and lubricants Determination of low-temperature cone penetration of lubricating greases First Edition Lubricants, Industrial Oils and Related Products (Class L) - Family E (Internal Combustion Engine Oils) - Specifications for TwoStroke-Cycle Gasoline Engine Oils (Categories EGB, EGC and EGD) First Edition Crude Petroleum and Petroleum Products - Transfer Accountability - Assessment of Vessel Experience Factor on Loading (VEFL) and Vessel Experience Factor on Discharging (VEFD) of Ocean-Going Tanker Vessels First Edition Plastics/Rubber - Polymer Dispersions and Rubber Latices (Natural and Synthetic) - Determination of Residual Monomers and Other Organic Components by Capillary-Column Gas Chromatography - Part 1: Direct Liquid Injection Method First Edition Plastics/Rubber - Polymer Dispersions and Rubber Latices (Natural and Synthetic) - Determination of Residual Monomers and Other Organic Components by Capillary-Column Gas Chromatography - Part 2: Headspace Method First Edition Textile Floor Coverings - Guidelines for Installation and Use on Stairs First Edition Textile Floor Coverings - Determination of Resistance to Staining by Acid Food Colours First Edition Information Technology - Programming Languages, Their Environments and System Software Interfaces - Programming Language Extended APL First Edition Air Quality - Assessment of Uncertainty of a Measurement Method under Field Conditions Using a Second Method as Reference First Edition Mechanical Vibration and Shock - Hand-Arm Vibration - Method for Measuring the Vibration Transmissibility of Resilient Materials When Loaded by the Hand-Arm System First Edition Textile Machinery and Accessories - Hexagon Nuts and Slotted Nuts for Spinning and Twisting Spindles First Edition Determination of Silver in Silver Jewellery Alloys - Volumetric (Potentiometric) Method Using Sodium Chloride or Potassium Chloride First Edition

ISO ISO ISO

13757 13758 13759

ISO

13760

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

13761 13764 13765-1 13765-2 13765-3 13765-4 13765-5 13765-6 13766 13769 AMD 1 13769 13770 13772 13773 13774 13775-1 13775-2

ISO ISO ISO ISO ISO ISO

13778 13779-1 13779-2 13779-4 13781 13782

ISO ISO ISO ISO

13783 13784-1 13784-2 13785-1

Liquefied Petroleum Gases - Determination of Oily Residues - High- Temperature Method First Edition (CEN EN ISO 13757: 1996) Liquefied Petroleum Gases - Assessment of the Dryness of Propane - Valve Freeze Method First Edition Petroleum Products - Determination of Alkyl Nitrate in Diesel Fuels - Spectrometric Method First Edition Plastics Pipes for the Conveyance of Fluids under Pressure - Miner┤s Rule - Calculation Method for Cumulative Damage First Edition Plastics Pipes and Fittings - Pressure Reduction Factors for Polyethylene Pipeline Systems for Use at Temperatures Above 20 Degrees C First Edition Space Data and Information Transfer Systems - Standard Formatted Data Units - Control Authority Procedures First Edition Refractory mortars Part 1: Determination of consistency using the penetrating cone method First Edition Refractory mortars Part 2: Determination of consistency using the reciprocating flow table method First Edition Refractory mortars Part 3: Determination of joint stability First Edition Refractory mortars Part 4: Determination of flexural bonding strength First Edition Refractory mortars Part 5: Determination of grain size distribution (sieve analysis) First Edition Refractory mortars Part 6: Determination of moisture content of ready-mixed mortars First Edition Earth-moving machinery Electromagnetic compatibility Second Edition Gas cylinders ù Stamp marking First Edition Gas cylinders ù Stamp marking First Edition Aluminium Alloy Gas Cylinders - Operational Requirements for Avoidance of Neck and Shoulder Cracks First Edition Forestry Machinery - Portable Chain-Saws - Non-Manually Actuated Chain Brake Performance Second Edition Rubber - Polychloroprene Latex - Determination of Alkalinity First Edition Rubber and Plastics Hoses for Fuels for Internal-Combustion Engines - Method of Test for Flammability First Edition Thermoplastic Tubing and Hoses for Automotive Use - Part 1: Non-Fuel Applications First Edition Thermoplastic Tubing and Hoses for Automotive Use - Part 2: Petroleum-Based-Fuel Applications First Edition Plain Bearings - Quality Assurance of Thin-Walled Half Bearings - Selective Assembly of Bearings to Achieve a Narrow Clearance Range First Edition Implants for Surgery - Hydroxyapatite - Part 1: Ceramic Hydroxyapatite First Edition Implants for Surgery - Hydroxyapatite - Part 2: Coatings of Hydroxyapatite First Edition Implants for Surgery - Hydroxyapatite - Part 4: Determination of Coating Adhesion Strength First Edition Poly(L-lactide) Resins and Fabricated Forms for Surgical Implants - In Vitro Degradation Testing First Edition Implants for Surgery - Metallic Materials - Unalloyed Tantalum for Surgical Implant Applications First Edition Plastics Piping Systems - Unplasticized Poly(Vinyl Chloride) (PVC-U) End-Load-Bearing Double-Socket Joints - Test Method for Leaktightness and Strength While Subjected to Bending and Internal Pressure First Edition Reaction-to-fire tests for sandwich panel building systems Part 1: Test method for small rooms First Edition Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms First Edition Reaction-to-fire tests for facades Part 1: Intermediate-scale test First Edition

ISO ISO

13785-2 13786

ISO

13787

ISO ISO ISO

13788 13789 13790

ISO

13791

ISO ISO ISO

13792 13793 13794

ISO

13800

ISO ISO ISO

13802 13803 13804

ISO ISO

13805 13806

ISO

13807

ISO

13813

ISO

13816

ISO

FDIS 13816

ISO

13817-1

ISO

13818-1 CORR 4

Reaction-to-fire tests for facades Part 2: Large-scale test First Edition Thermal Performance of Building Components - Dynamic Thermal Characteristics - Calculation Methods First Edition Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity First Edition Hygrothermal Performance of Building Comopnents and Building Elements - Internal Surface Temperature to Avoid Critical Surface Humidity and Interstitial Condensation - Calculation Methods First Edition Thermal Performance of Buildings - Transmission Heat Loss Coefficient - Calculation Method First Edition Thermal performance of buildings Calculation of energy use for space heating First Edition Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling General criteria and validation procedures First Edition Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling Simplified methods First edition Thermal Performance of Buildings - Thermal Design of Foundations to Avoid Frost heave First Edition Ambient Air - Determination of Asbestos Fibres - Indirect-Transfer Transmission Electron Microscopy Method First Edition Information Technology - Procedure for the Registration of Identifiers and Attributes for Volume and File Structure First Edition Plastics - Verification of Pendulum Impact-Testing Machines - Charpy, Izod and Tensile Impact-Testing First Edition; Technical Corrigendum 1 04/15/2000 Paints and Varnishes - Determination of Reflection Haze on Paint Films at 20 First Edition Vitreous and Porcelain Enamels for Aluminium - Production of Specimens for Testing First Edition Virtreous and Porcelain Enamels for Aluminium - Determination of the Adhesion of Enamels on Aluminium under the Action of Electrolytic Solution (Spall Test) First Edition Vitreous and Porcelain Enamels - Corrosion Tests in Closed Systems First Edition Vitreous and Porcelain Enamels - Determination of Crack Formation Temperature in the Thermal Shock Testing of Enamels for the Chemical Industry First Edition; Technical Corrigendum 1: 10/15/2000 Information Technology - Programming Languages - Generic Packages of Real and Complex Type Declarations and Basic Operations for Ada (Including Vector and Matrix Types) First Edition Information Technology - Programming Languages, Their Environments and System Software Interfaces - Programming Language ISLISP First Edition Information technology ù Programming languages, their environments and system software interfaces ù Programming language ISLISP First Edition Information Technology - Programming Languages, Their Environments and System Software Interfaces - Vienna Development Method - Specification Language - Part 1: Base Language First Edition Information technology - Generic coding of moving pictures and associated audio information: Systems TECHNICAL CORRIGENDUM 4 Second Edition

ISO

13818-1 AMD 5

ISO

13818-1 AMD 4

ISO

13818-1 CORR 3

ISO

13818-1 AMD 3

ISO ISO ISO ISO ISO ISO

13818-1 AMD 2 13818-1 AMD 1 13818-1 CORR 2 13818-1 CORR 1 13818-1 13818-1 FDAM 2

ISO

13818-1 FDAM 1

ISO

13818-2 CORR 2

ISO

13818-2 CORR 1

ISO ISO

13818-2 AMD 1 13818-2

ISO ISO

13818-2 FDAM 2 13818-3

ISO

13818-4 CORR 1

Information technology - Generic coding of moving pictures and associated audio information: Systems AMENDMENT 4: ISAN and VISAN use in the content labelling descriptor Second Edition; Corrigendum 1: 03/01/2002; Corrigendum 2: 12/01/2002; Amendment 1: 08/01/2003; Amendment 2: 02/15/2004; Amendment 3: 11/01/2004; Corrigendum 3: 06/15/2005; Amendment 4: 07/01/2005; Amendment 5: 12/15/2005 Information technology - Generic coding of moving pictures and associated audio information: Systems AMENDMENT 4: ISAN and VISAN use in the content labelling descriptor Second Edition; Technical Corrigendum 1: 03/01/2002; Technical Corrigendum 2: 12/01/2002; Amendment 1: 08/01/2003; Amendment 2: 02/15/2004; Amendment 3: 11/01/2004; Technical Corrigendum 3: 06/15/2005; Amendment 4: 07/01/2005 Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition; Corrigendum 1: 3/01/2002; Corrigendum 2: 12/01/2002; Amendment 1: 8/1/2003; Amendment 2: 02/15/2004; Amendment 3: 11/01/2004; Corrigendum 3: 06/15/2005 Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition; Corrigendum 1: 3/01/2002; Corrigendum 2: 12/01/2002; Amendment 1: 8/1/2003; Amendment 2: 02/15/2004; Amendment 3: 11/01/2004 Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition; Corrigendum 1: 3/01/2002; Corrigendum 2: 12/01/2002; Amendment 1: 8/1/2003; Amendment 2: 02/15/2004 Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Systems Second Edition Title not available Information technology Generic coding of moving pictures and associated audio information: Systems AMENDMENT 1: Transport of MPEG-4 streaming text and MPEG-4 lossless audio over MPEG-2 systems Information technology ù Generic coding of moving pictures and associated audio information: Video TECHNICAL CORRIGENDUM 2 Second Edition Information technology ù Generic coding of moving pictures and associated audio information: Video TECHNICAL CORRIGENDUM 1 Second Edition Information technology ù Generic coding of moving pictures and associated audio information: Video AMENDMENT 1: Content description data Second Edition Information Technology - Generic Coding of Moving Pictures and Associated Audio Information: Video Second Edition Information technology - Generic coding of moving pictures and associated audio information: Video AMENDMENT 2: Support for Colour Spaces Information Technology - Generic Coding of Moving Pictures and Associated Audio Information - Part 3: Audio First Edition Information technology ù Generic coding of moving pictures and associated audio information ù Part 4: Conformance testing TECHNICAL CORRIGENDUM 1 Second Edition

ISO

13818-4 CORR 1 TO AMD 2

ISO

13818-4 AMD 2

ISO

13818-4 AMD 1

ISO

13818-4

ISO

13818-6

ISO

13818-7

ISO

13818-7 FDAM 1

ISO

13818-9

ISO

13818-10

ISO ISO ISO ISO ISO ISO

13818-11 13819-2 13820 13821 13822 13829

ISO

13842

ISO

13844

ISO

13845

ISO

13846

ISO

13847

Information technology ù Generic coding of moving pictures and associated audio information ù Part 4: Conformance testing AMENDMENT 2: Additional audio conformance test sequences TECHNICAL CORRIGENDUM 1 Second Edition Information technology ù Generic coding of moving pictures and associated audio information ù Part 4: Conformance testing AMENDMENT 2: Additional audio conformance test sequences Second Edition Information technology ù Generic coding of moving pictures and associated audio information ù Part 4: Conformance testing AMENDMENT 1: MPEG-2 IPMP conformance testing Second Edition Information technology Generic coding of moving pictures and associated audio information Part 4: Conformance testing Second Edition Information Technology - Generic Coding of Moving Pictures and Associated Audio Information - Part 6: Extensions for DSM-CC First Edition; Technical Corrigendum 1: 11-01-1999; Amendment 2: 06-01-2000; Amendment 1: 10-15-2000; Amendment 3: 08-15-2001; Technical Corrigendum 2: 8/15/2002; Technical Corrigendum 1 to Amendment 1: 10/01/02 Information technology Generic coding of moving pictures and associated audio information Part 7: Advanced Audio Coding (AAC) Fourth Edition Information technology ù Generic coding of moving pictures and associated audio information ù Part 7: Advanced Audio Coding (AAC) AMENDMENT 1: Transport of MPEG Surround in AAC Fourth Edition Information Technology - Generic Coding of Moving Pictures and Associated Audio Information - Part 9: Extension for Real Time Interface for Systems Decoders First Edition Information Technology - Generic Coding of Moving Pictures and Associated Audio Information - Part 10: Conformance Extensions for Digital Storage Media Command and Control (DSM-CC) First Edition Information technology Generic coding of moving pictures and associated audio information Part 11: IPMP on MPEG-2 systems First Edition Petroleum and Natural Gas Industries - Offshore Structures - Part 2: Fixed Steel Structures First Edition Paper, Board and Corrugated Fibreboard - Description and Calibration of Compression-Testing Equipment First Edition Corrugated Fibreboard - Determination of Edgewise Crush Resistance - Waxed Edge Method First Edition Bases for Design of Structures - Assessment of Existing Structures First Edition Water Quality - Determination of the Genotoxicity of Water and Waste Water Using the Umu-Test First Edition Information Technology - 130 mm Optical Disk Cartridges for Information Interchange - Capacity: 2 Gbytes Per Cartridge First Edition Plastics Piping Systems - Elastomeric-Sealing-Ring-Type Socket Joints of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Use with PVC-U Pipes - Test Method for Leaktightness under Negative Pressure First Edition Plastics Piping Systems - Elastomeric-Sealing-Ring-Type Socket Joints for Use with Unplasticized Poly(Vinyl Chloride) (PVC-U) Pipes - Test Method for Leaktightness under Internal Pressure and with Angular Deflection First Edition Plastic Piping Systems - End-Load-Bearing and Non-End-Load-Bearing Assemblies and Joints for Thermoplastics Pressure Piping Test Method for Long-Term Leaktightness Under internal Water Pressure First Edition Petroleum and Natural Gas Industries - Pipeline Transportation Systems - Welding of Pipelines First Edition; Corrigendum 1:12/15/2001

ISO ISO ISO ISO ISO ISO ISO

13849-1 13849-2 13850 13851 13852 13853 13854

ISO

13855

ISO

13856-1

ISO

13856-2

ISO ISO ISO ISO

13856-3 13860 13861 13862

ISO

13863

ISO

13864

ISO

13865

ISO

13866

ISO

13868

ISO

13869

ISO

13870

ISO

13871

Safety of machinery Safety-related parts of control systems Part 1: General principles for design Second Edition Safety of machinery Safety-related parts of control systems Part 2: Validation First edition Safety of Machinery - Emergency Stop - Principles for Design Second Edition Safety of Machinery - Two-Hand Control Devices - Functional Aspects and Design Principles First Edition Safety of Machinery - Safety Distances to Prevent Danger Zones Being Reached by the Upper Limbs First Edition Safety of Machinery - Safety Distances to Prevent Danger Zones Being Reached by the Lower Limbs First Edition Safety of Machinery - Minimum Gaps to Avoid Crushing of Parts of the Human Body First Edition Safety of Machinery - Positioning of Protective Equipment with Respect to the Approach Speeds of Parts of the Human Body First Edition Safety of Machinery - Pressure-Sensitive Protective Devices - Part 1: General Principles for Design and Testing of PressureSensitive Mats and Pressure-Sensitive Floors First Edition Safety of machinery Pressuresensitive protective devices Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars First Edition Safety of machinery Pressuresensitive protective devices Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices First Edition Machinery for Forestry - Forwarders - Terms, Definitions and Commercial Specifications First Edition Machinery for Forestry - Wheeled Skidders - Terms, Definitions and Commercial Specifications First Edition Machinery for Forestry - Feller-Bunchers - Terms, Definitions and Commercial Specifications First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Path Replacement Additional Network Feature Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Name Identification Supplementary Services First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Transfer Supplementary Services Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Completion Supplementary Services First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Name Identification Supplementary Services Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Transfer Supplementary Service Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Completion Supplementary Services Third Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Telecommunications Networks Digital Channel Aggregation First Edition

Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Diversion Supplementary Services Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Diversion Supplementary Services Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Path Replacement Additional Network Feature Third Edition Liquid milk Determination of acidsoluble B-lactoglobulin content Reverse-phase HPLC method First Edition Soil Quality - Determination of Polynuclear Aromatic Hydrocarbons - Method Using High-Performance Liquid Chromatography First Edition Soil Quality - Determination of Total Nitrogen Content by Dry Combustion (Elemental Analysis") First Edition" Petroleum and Natural Gas Industries - Content and Drafting of a Functional Specification First Edition Petroleum and Natural Gas Industries - Content and Drafting of a Technical Specification First Edition Animal and vegetable fats and oils Determination of isolated trans isomers by infrared spectrometry First Edition

ISO

13872

ISO

13873

ISO ISO

13874 13875

ISO ISO ISO ISO ISO

13877 13878 13879 13880 13884

ISO ISO ISO ISO

13885-1 13886 13887 13888-1

Binders for Paints and Varnishes - Gel Permeation Chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as Eluent First Edition Information Technology - Language-Independent Procedure Calling (LIPC) First Edition Cold-reduced steel sheet of higher yield strength with improved formability Second Edition IT security techniques Non-repudiation Part 1: General Second Edition

ISO

13888-2

Information Technology - Security Techniques - Non-Repudiation - Part 2: Mechanisms Using Symmetric Techniques First Edition

ISO ISO

13888-3 13894-1

ISO ISO ISO

13894-2 13897 CORR 1 13897

ISO

13898-1

ISO

13898-2

ISO

13898-3

ISO

13898-4

Information Technology - Security Techniques - Non-Repudiation - Part 3: Mechanisms Using Asymmetric Techniques First Edition High-Pressure Decorative Laminates - Composite Elements - Part 1: Test Methods First Edition High-pressure decorative laminates Composite elements Part 2: Specifications for composite elements with wood-based substrates for interior use First Edition Dentistry ù Amalgam capsules TECHNICAL CORRIGENDUM 1 First Edition Dentistry - Amalgam Capsules First Edition Steel and Iron - Determination of Nickel, Copper and Cobalt Contents - Inductively Coupled Plasma Atomic Emission Spectrometric Method - Part 1: General Requirements and Sample Dissolution First Edition Steel and Iron - Determination of Nickel, Copper and Cobalt Contents - Inductively Coupled Plasma Atomic Emission Spectrometric Method - Part 2: Determination of Nickel Content First Edition Steel and Iron - Determination of Nickel, Copper and Cobalt Contents - Inductively Coupled Plasma Atomic Emission Spectrometric Method - Part 3: Determination of Copper Content First Edition Steel and Iron - Determination of Nickel, Copper or Cobalt Contents - Inductively Coupled Plasma Atomic Emission Spectrometric Method - Part 4: Determination of Cobalt Content First Edition

ISO ISO

13899-2 13900

ISO ISO ISO

13902 13903 13904

ISO

13909-1

ISO

13909-2

ISO

13909-3

ISO

13909-4

ISO

13909-5

ISO

13909-6

ISO

13909-7

ISO ISO ISO

13909-8 13910 13912

ISO ISO

13916 13918

ISO

13919-1

ISO

13919-2

ISO

13920

Steel Determination of Mo, Nb and W contents in alloyed steel Inductively coupled plasma atomic emission spectrometric method Part 2: Determination of Nb content First Edition Steel - Determination of Boron Content - Curcumin Spectrophotometric Method After Distillation First Edition Steel and Iron - Determination of High Sulfur Content - Infrared Absorption Method After Combustion in an Induction Furnace First Edition Animal feeding stuffs Determination of amino acids content First edition Animal feeding stuffs Determination of tryptophan content First edition Hard Coal and Coke - Mechanical Sampling - Part 1: General Introduction First Edition; Cancels and Replaces ISO 9411-1:1994 and ISO 9411-2:1993 Hard Coal and Coke - Mechanical Sampling - Part 2: Coal - Sampling from Moving Streams First Edition; Cancels and Replaces ISO 9411-1:1994 and ISO 9411-2:1993 Hard Coal and Coke - Mechanical Sampling - Part 3: Coal - Sampling from Stationary Lots First Edition; Cancels and Replaces ISO 9411-1:1994 and ISO 9411-2:1993 Hard Coal and Coke - Mechanical Sampling - Part 4: Coal - Preparation of Test Samples First Edition; Cancels and Replaces ISO 9411-1:1994 and ISO 9411-2:1993 Hard Coal and Coke - Mechanical Sampling - Part 5: Coke - Sampling from Moving Streams First Edition; Cancels and Replaces ISO 9411-1:1994 and ISO 9411-2:1993 Hard Coal and Coke - Mechanical Sampling - Part 6: Coke - Preparation of Test Samples First Edition; Cancels and Replaces ISO 9411-1:1994 and ISO 9411-2:1993 Hard Coal and Coke - Mechanical Sampling - Part 7: Methods for Determining the Precision of Sampling, Sample Preparation and Testing First Edition; Cancels and Replaces ISO 9411-1:1994 and ISO 9411-2:1993 Hard Coal and Coke - Mechanical Sampling - Part 8 Methods of Testing for Bias First Edition; Cancels and Replaces ISO 94111:1994 and ISO 9411-2:1993 Structural timber Characteristic values of strength-graded timber Sampling, full-size testing and evaluation First Edition Structural timber - Machine strength grading - Basic principles First Edition Welding - Guidance on the Measurement of Preheating Temperature, Interpass Temperature and Preheat Maintenance Temperature First Edition CEN EN ISO 13 916: 1996 Welding - Studs and Ceramic Ferrules for Arc Stud Welding First Edition Welding - Electron and Laser-Beam Welded Joints - Guidance on Quality Levels for Imperfections - Part 1: Steel First Edition CEN EN ISO 13 919-1: 1996 Welding - Electron and Laser Beam Welded Joints - Guidance on Quality Levels for Imperfections - Part 2: Aluminium and its Weldable Alloys First Edition Welding - General Tolerances for Welded Constructions - Dimensions for Lengths and Angles - Shape and Position First Edition CEN EN ISO 13 920: 1996

ISO

13921

ISO

13923

ISO ISO ISO ISO ISO ISO

13924 13926-1 13926-2 13927 13929 13930

ISO ISO

13934-1 13934-2

ISO

13935-1

ISO

13935-2

ISO

13936-1

Aerospace - Screws, 100 Degrees Reduced Countersunk Head, Internal Offset Cruciform Ribbed or Unribbed Drive, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa Dimensions First Edition Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DDS-2 Format Using 120 m Length Tape First Edition Plastics Pipes and Fittings - Bending-Tensile Cycle Test for PE/Metal Transition Fittings, PE Tapping Tees and PE Branch Saddles First Edition Pen Systems - Part 1: Glass Cylinders for Pen-Injectors for Medical Use Third Edition Pen Systems - Part 2: Plungers and Discs for Pen-Injectors for Medical Use First Edition Plastics - Simple Heat Release Test Using a Conical Radiant Heater and a Thermopile Detector First Edition Small Craft - Steering Gear - Geared Link Systems First Edition Iron Ores - Dynamic Test for Low-Temperature Reduction-Disintegration First Edition Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method First Edition Textiles - Tensile Properties of Fabrics - Part 2: Determination of Maximum Force and Using the Grab Method First Edition Textiles - Seam Tensile Properties of Fabrics and Made-Up Textile Articles - Part 1: Determination of Maximum Force to Seam Rupture Using the Strip Method First Edition Textiles - Seam Tensile Properties of Fabrics and Made-Up Textile Articles - Part 2: Determination of Maximum Force to Seam Rupture Using the Grab Method First Edition Textiles Determination of the slippage resistance of yarns at a seam in woven fabrics Part 1: Fixed seam opening method First Edition

ISO

13936-2

Textiles Determination of the slippage resistance of yarns at a seam in woven fabrics Part 2: Fixed load method First Edition

ISO

13936-3

ISO

13937-1

Textiles Determination of the slippage resistance of yarns at a seam in woven fabrics Part 3: Needle clamp method First edition Textiles - Tear Properties of Fabrics - Part 1: Determination of Tear Force of Trouser-Shaped Test Specimens (Single Tear Method) First Edition; Corrigendum 1: 10/1/2004

ISO

13937-2

ISO

13937-3

ISO

13937-4

ISO

13938-1

Textiles - Tear Properties of Fabrics - Part 2: Determination of Tear Force Using Ballistic Pendulum Method (Elmendorf) First Edition Textiles - Tear Properties of Fabrics - Part 3: Determination of Tear Force of Wing-Shaped Test Specimens (Single Tear Method) First Edition Textiles - Tear Properties of Fabrics - Part 4: Determination of Tear Force of Tongue-Shaped Test Specimens (Double Tear Test) ) First Edition Textiles - Bursting Properties of Fabrics - Part 1: Hydraulic Method for Determination of Bursting Strength and Bursting Distension First Edition; Replaces ISO 2960: 1974

Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting Distension First Edition Bonded Abrasive Products - Limit Deviations and Run-Out Tolerances First Edition Fire Safety - Vocabulary Securite Au Feu - Vocabulaire First Edition; Replaces ISO/IEC Guide 52 Lubricated Metal-Powder Mixes - Determination of Lubricant Content - Modified Soxhlet Extraction Method First Edition; Supersedes ISO 4495: 1978 Metallic powders ù Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen First edition

ISO ISO ISO

13938-2 13942 13943

ISO

13944

ISO

13947

ISO

13948-1

ISO ISO

13948-2 13950

ISO

13951

ISO

13953

ISO ISO ISO ISO ISO ISO ISO ISO

13954 13955 13957 13958 13959 13960 13961 13962

Diesel Engines - Fuel Injection Pumps and Fuel Injector Low-Pressure Connections - Part 1: Threaded Connections First Edition Diesel Engines - Fuel Injection Pumps and Fuel Injector Low-Pressure Connections - Part 2: Non-Threaded (Push-On) Connections First Edition Plastics pipes and fittings ù Automatic recognition systems for electrofusion joints First Edition [Replaced: ISO TR 13950] Plastics Piping Systems - Test Method for the Resistance of Polyolefin Pipe/Pipe or Pipe/Fitting Assemblies to Tensile Loading First Edition Polyethylene (PE) Pipes and Fittings - Determination of the Tensile Strength and Failure Mode of Test Pieces from a Butt-Fused Joint First Edition Plastics Pipes and Fittings - Peel Decohesion Test for Polyethylene (PE) Electrofusion Assemblies of Nominal Outside Diameter Greater Than or Equal to 90 mm First Edition Plastics Pipes and Fittings - Crushing Decohesion Test for Polyethylene (PE) Electrofusion Assemblies First Edition Plastics Pipes and Fittings - Polyethylene (PE) Tapping Tees - Test Method for Impact Resistance First Edition Concentrates for Haemodialysis and Related Therapies First Edition Water for Haemodialysis and Related Therapies First Edition Cardiovascular implants and artificial organs Plasmafilters First Edition Information Technology - Scalable Coherent Interface (SCI) IEEE Std 1596; First Edition Information Technology - Data Interchange on 12,7 mm, 112-Track Magnetic Tape Cartridges - DLT 2 Format First Edition

ISO ISO ISO ISO ISO ISO ISO ISO

13963 13964 13965 13966 13967 13968 13969 13976

Information Technology - Data Interchange on 90 mm Optical Disk Cartridges - Capacity: 230 Megabytes per Cartridge First Edition Air Quality - Determination of Ozone in Ambient Air - Ultraviolet Photometric Method First Edition Meat and Meat Products - Determination of Starch and Glucose Contents - Enzymatic Method First Edition Thermoplastics Pipes and Fittings - Nominal Ring Stiffnesses First Edition Thermoplastics Fittings - Determination of Ring Stiffness First Edition Plastics Piping and Ducting Systems - Thermoplastics Pipes - Determination of Ring Flexibility First Edition Milk and milk products Guidelines for a standardized description of microbial inhibitor tests First Edition Hot-Rolled Steel Sheet in Coils of Structural Quality and Heavy Thickness Second Edition

ISO

13982-1

ISO ISO ISO

13982-2 13984 13985

ISO

13990-1

ISO

13990-2

ISO ISO

13990-3 13992

ISO

13993

ISO

13994 CORR 1

ISO

13994

ISO ISO ISO ISO

13995 13996 13997 13998

ISO

13999-1

ISO

13999-2

ISO ISO

13999-3 14001

ISO ISO ISO

14004 14015 14020

Protective clothing for use against solid particulates Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) First Edition Protective clothing for use against solid particulates Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits First Edition Liquid Hydrogen - Land Vehicle Fuelling System Interface First Edition Liquid hydrogen Land vehicle fuel tanks First Edition Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 1: Vocabulary MatÚriel pour l'industrie textile Fournisseurs de fil et dispositifs de surveillance pour machines Ó tricoter Partie 1: Vocabulaire First Edition; Cancels and Replaces ISO 13990:1996 Textile Machinery and Accessories Yarn Feeders and Yarn Control for Knitting Machines Part 2: Connecting Dimensions for Yarn Feeders and Yarn Control Devices First Edition; Cancels and Replaces ISO 13990: 1996 Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 3: Dimensions for connecting and interconnection cables First Edition; Cancels and Replaces ISO 13990: 1996 Alpine touring ski-bindings Requirements and test methods Second Edition Rental Ski Shop Practice - Sampling and Inspection of Complete and Incomplete Alpine Ski-Binding-Boot Systems in Rental Applications First Edition Clothing for protection against liquid chemicals ù Determination of the resistance of protective clothing materials to penetration by liquids under pressure TECHNICAL CORRIGENDUM 1 Second Edition Clothing for protection against liquid chemicals ù Determination of the resistance of protective clothing materials to penetration by liquids under pressure Second Edition Protective Clothing - Mechanical Properties - Test Method for the Determination of the Resistance to Puncture and Dynamic Tearing of Materials First Edition Protective Clothing - Mechanical Properties - Determination of Resistance to Puncture First Edition Protective Clothing - Mechanical Properties - Determination of Resistance to Cutting by Sharp Objects First Edition Protective Clothing - Aprons, Trousers and Vests Protecting Against Cuts and Stabs by Hand Knives First Edition Protective Clothing - Gloves and Arm Guards Protecting Against Cuts and Stabs by Hand Knives - Part 1: Chain-Mail Gloves and Arm Guards First Edition Protective clothing Gloves and arm guards protecting against cuts and stabs by hand knives Part 2: Gloves and arm guards made of material other than chain mail First Edition Protective Dlothing - Globes and Arm Guards Protecting against Cuts and Stabs by Hand Knives - Part 3: Impact Cut Test for Fabric, Leather and Other Materials First Edition Environmental management systems Requirements with guidance for use Second Edition Environmental Management Systems - General Guidelines on Principles, Systems and Supporting Techniques Second Edition Environmental Management - Environmental Assessment of Sites and Organizations (EASO) First Edition Environmental Labels and Declarations - General Principles Second Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

14021 14024 14025 14031 14040 14041 14042 14043 14044 14050 14063

ISO

14064-1

ISO

14064-2

ISO

14064-3

ISO

14065

ISO ISO ISO ISO ISO ISO

14096-1 14096-2 14102 14104 14111 14112

ISO

14113

ISO ISO

14114 14118

ISO ISO

14119 AMD 1 14119

ISO

14120

Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling) First Edition Environmental Labels and Declarations - Type I Environmental Labelling - Principles and Procedures First Edition Environmental Labels and Declarations - Type III Environmental Declarations First Edition Environmental Management - Environmental Performance Evaluation - Guidelines First Edition Environmental management Life cycle assessment Principles and framework Second Edition Environmental Management - Life Cycle Assessment - Goal and Scope Definition and Inventory Analysis First Edition Environmental Management - Life Cycle Assessment - Life Cycle Impact Assessment First Edition Environmental Management - Life Cycle Assessment - Life Cycle Interpretation First Edition Environmental management Life cycle assessment Requirements and guidelines First Edition Environmental Management - Vocabulary Management Environnemental - Vocabulaire Second Edition Environmental management Environmental communication Guidelines and examples First Edition Greenhouse gases Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals First Edition Greenhouse gases Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements First Edition Greenhouse gases Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions First Edition Greenhouse gases ù Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition First edition Non-destructive testing Qualification of radiographic film digitisation systems Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control First Edition Non-destructive testing Qualification of radiographic film digitisation systems Part 2: Minimum requirements First Edition Information Technology - Guideline for the Evaluation and Selection of CASE Tools First Edition Gears - Surface Temper Etch Inspection After Grinding First Edition; Corrected and Reprinted 02-15-1997 Natural Gas - Guidelines to Traceability in Analysis First Edition Gas Welding Equipment - Small Kits for Gas Brazing and Welding First Edition Gas Welding Equipment - Rubber and Plastic Hoses Assembled for Compressed or Liquefied Gases up to a Maximum Design Pressure of 450 Bar First Edition Gas Welding Equipment - Acetylene Manifold Systems for Welding, Cutting and Allied Processes - General Requirements First Edition Safety of Machinery - Prevention of Unexpected Start-Up Safety of Machinery - Interlocking Devices Associated with Guards - Principles for Design and Selection AMENDMENT 1: Design to minimize defeat possibilities First Edition Safety of Machinery - Interlocking Devices Associated with Guards - Principles for Design and Selection First Edition Safety of Machinery - Guards - General Requirements for the Design and Construction of Fixed and Movable Guards First Edition

ISO ISO

14121 14121-1

Safety of Machinery - Principles of Risk Assessment First Edition Safety of machinery ù Risk assessment ù Part 1: Principles First Edition Safety of Machinery - Permanent Means of Access to Machinery - Part 1: Choice of Fixed Means of Access between Two Levels First Edition Safety of Machinery - Permanent Means of Access to Machinery - Part 2: Working Platforms and Walkways First Edition Safety of Machinery - Permanent Means of Access to Machinery - Part 3: Stairs, Stepladders and Guard-Rails First Edition Safety of machinery Permanent means of access to machinery Part 4: Fixed ladders First Edition Safety of Machinery - Reduction of Risks to Health from Hazardous Substances Emitted by Machinery - Part 1: Principles and Specifications for Machinery Manufacturers First Edition Safety of Machinery - Reduction of Risks to Health from Hazardous Substances Emitted by Machinery - Part 2: Methodology Leading to Verification Procedures First Edition

ISO ISO ISO ISO

14122-1 14122-2 14122-3 14122-4

ISO

14123-1

ISO

14123-2

ISO

14125

ISO

14126

ISO

14129

ISO ISO

14130 14131

ISO

14132-1

ISO

14132-2 CORR 1

ISO

14132-2

Fibre-Reinforced Plastic Composites - Determination of Flexural Properties First Edition; Technical Corrigendum 1: 07/15/2001 Fibre-Reinforced Plastic Composites - Determination of Compressive Properties in the In-Plane Direction First Edition; Replaces ISO 8515: 1991; Corrigendum 1 7/15/2001 Fibre-Reinforced Plastic Composites - Determination of the In -Plane Shear Stress/Shear Strain Response, Including the In-Plane Shear Modulus and Strength, by the Plus or Minus 45 Degrees Tension Test Method First Edition Fibre-Reinforced Plastic Composites - Determination of Apparent Interlaminar Shear Strength by Short-Beam Method First Edition; Corrigendum 1: 11/1/2003 Agricultural sprayers Boom steadiness Test methods First Edition Optics and optical instruments - Vocabulary for telescopic systems - Part 1: General terms and alphabetical indexes of terms in ISO 14132 Optique et instruments d'optique - Vocabulaire relatif aux systemes telescopiques - Partie 1: Termes generaux et index alphabetiques des terms dans I'ISO 14132 First edition Optics and optical instruments ù Vocabulary for telescopic systems ù Part 2: Terms for binoculars, monoculars and spotting scopes TECHNICAL CORRIGENDUM 1 Optique et instruments d'optique ù Vocabulaire relatif aux syst×mes tÚlescopiques ù Partie 2: Termes pour jumelles, monoculaires et lunettes RECTIFICATIF TECHNIQUE 1 First Edition Optics and optical instruments Vocabulary for telescopic systems Part 2: Terms for binoculars, monoculars and spotting scopes Optique et instruments d'optique Vocabulaire relatif aux syst×mes tÚlescopiques Partie 2: Termes pour jumelles, monoculaires et lunettes First Edition

ISO

14132-3

Optics and optical instruments - Vocabulary for telescopic systems - Part 3: Terms for telescopic sights Optique et instruments d'optique - Vocabulaire relatif aux systems telescopiques - Partie 3: Termes pour lunettes de pointage First edition

ISO

14132-4

Optics and optical instruments - Vocabulary for telescopic systems - Part 4: Terms for astronomical telescopes Optique et instruments d'optique - Vocabulaire relatif aux systemes telescopiques - Partie 4: Terms pour telescopes astronomiques First edition

ISO

14133-1

ISO ISO ISO ISO

14133-2 14134 14135-1 14135-2

ISO

14136

ISO

14137

Optics and optical instruments - Specifications for binoculars, monoculars and spotting scopes - Part 1: General purpose instruments First Edition Optics and optical instruments - Specifications for binoculars, monoculars and spotting scopes - Part 2: High performance instruments First Edition Optics and optical instruments Specifications for astronomical telescopes First Edition Optics and optical instruments Specifications for telescopic sights Part 1:General-purpose instruments First Edition Optics and optical instruments Specifications for telescopic sights Part 2: High-performance instruments First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Identification Supplementary Services First Edition; ETSI PRETS 300173: 1995 Machine Tools - Test Conditions for Wire Electrical-Discharge Machines (Wire EDM) - Terminology and Testing of the Accuracy First Edition

ISO

14139

Hydrometric Determinations - Flow Measurements in Open Channels Using Structures - Compound Gauging Structures First Edition

ISO

14143-1

ISO ISO ISO

14143-2 14145-1 14145-2

ISO

14146

Information technology ù Software measurement ù Functional size measurement Part 1: Definition of concepts Second Edition Information Technology - Software Measurement - Functional Size Measurement - Part 2: Conformity Evaluation of Software Size Measurement Methods to ISO/IEC 14143-1:1998 First Edition Roller Ball Pens and Refills - Part 1: General Use First Edition; Corrected and Reprinted 07/01/1999 Roller Ball Pens and Refills - Part 2: Documentary Use (DOC) First Edition Radiation Protection - Criteria and Performance Limits for the Periodic Evaluation of Processors of Personal Dosemeters for X and Gamma Radiation First Edition

ISO

14152

Neutron Radiation Protection Shielding - Design Principles and Considerations for the Choice of Appropriate Materials First Edition

ISO ISO

14154 14155-1

ISO ISO ISO

14155-2 14156 14159

ISO

14160

ISO ISO

14161 14163

Soil quality Determination of some selected hlorophenols Gas-chromatographic method with electron-capture etection First Edition Clinical Investigation of Medical Devices for Human Subjects - Part 1: General Requirements First Edition Clinical Investigation of Medical Devices for Human Subjects - Part 2: Clinical Investigation Plans First Edition; Together with the first edition of 14155-1 Cancels and Replaces 14155: 1996 Milk and Milk Products - Extraction Methods for Lipids and Liposoluble Compounds First Edition; IDF 172 Safety of Machinery - Hygiene Requirements for the Design of Machinery First Edition Sterilization of Single-Use Medical Devices Incorporating Materials of Animal Origin - Validation and Routine Control of Sterilization by Liquid Sterilants First Edition Sterilization of Health Care Products - Biological Indicators - Guidance for the Selection, Use and Interpretation of Results First Edition Acoustics - Guidelines for Noise Control by Silencers First Edition

ISO

14164

Stationary Source Emissions - Determination of the Volume Flowrate of Gas Streams in Ducts - Automated Method First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

14165-114 14165-115 14165-116 14165-122 14165-131 14165-141 14165-211 14165-222 14165-241 14165-331 14165-414 14168

ISO

14169

ISO

14171

ISO

14172 CORR 2

ISO

14172 CORR 1

Information technology Fibre Channel Part 114: 100 MB/s balanced copper physical interface (FC-100-DF-EL-S) First Edition Information technology û Fibre channel û Part 115: Physical interfaces (FC-PI) First Edition Information technology Fibre channel Part 116: 10 Gigabit Fibre Channel (10GFC) First Edition Information technology - Fibre channel - Part 122: Arbitrated loop-2 (FC-AL-2) First Edition Information Technology - Fibre Channel - Part 131: Switch Fabric Requirements (FC-SW) First Edition Information Technology - Fibre Channel - Part 141: Fabric Generic Requirements (FC-FG) First Edition Information Technology - Fibre Channel - Part 211: Mapping to HIPPI-FP (FC-FP) First Edition Information technology Fibre channel Part 222: Single-byte command sets-2 mapping protocol (FC-SB-2) First Edition Information technology Fibre channel Part 241: Backbone 2 (FC-BB-2) First Edition Information technology û Fibre channel û Part 331: Virtual interface (FC-VI) First edition Information technology û Fibre channel û Part 414: Generic services-4 (FC-GS-4) First Edition Metallic Powders, Excluding Hardmetals - Method for Testing Copper-Base Infiltrating Powders First Edition Information Technology - 90 mm Flexible Disk Cartridges for Information Interchange - 21 MBytes Formatted Capacity - ISO Type 305 First Edition Welding consumables Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels Classification Frist Edition Welding consumables ù Covered electrodes for manual metal arc welding of nickel and nickel alloys ù Classification TECHNICAL CORRIGENDUM 2 First Edition Welding consumables ù Covered electrodes for manual metal arc welding of nickel and nickel alloys ù Classification TECHNICAL CORRIGENDUM 1 First Edition

ISO ISO ISO ISO

14172 14174 14175 14180

Welding consumables ù Covered electrodes for manual metal arc welding of nickel and nickel alloys ù Classification First Edition Welding consumables Fluxes for submerged arc welding Classification First Edition Welding Consumables - Shielding Gases for Arc Welding and Cutting First Edition Solid Mineral Fuels - Guidance on the Sampling of Coal Seams First Edition

ISO

14181

Animal Feeding Stuffs - Determination of Residues of Organochlorine Pesticides - Gas Chromatographic Method First Edition

ISO

14182

ISO

14183

Animal Feeding Stuffs - Determination of Residues of Organophosphorus Pesticides - Gas Chromatographic Method First Edition Animal feeding stuffs Determination of monensin, narasin and salinomycin contents Liquid chromatographic method using postcolumn derivatization First Edition

ISO

14184-1

Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method) First Edition

ISO ISO

14184-2 14190

Textiles - Determination of Formaldehyde - Part 2: Released Formaldehyde (Vapour Absorption Method) First Edition Aerospace - Airframe Rolling Bearings: Ball and Spherical Roller Bearings - Technical Specification First Edition

ISO

14191

Aerospace - Airframe Spherical Roller Bearings, Single-Row, Self-Aligning, Diameter Series 3 and 4 - Metric Series First Edition

ISO

14192

ISO

14193

ISO

14194

ISO

14195

ISO

14196

Aerospace - Airframe Spherical Roller Bearings, Single-Row, Self-Aligning, Shielded, Intermediate Duty - Metric Series First Edition Aerospace - Airframe Spherical Roller Bearings, Single-Row, Self-Aligning, Sealed, Extended Inner Ring, Intermediate Duty - Inch Series First Edition Aerospace - Airframe Spherical Roller Bearings, Double-Row, Self-Aligning, Sealed, Extended Inner Ring, Heavy Duty - Inch Series First Edition Aerospace - Airframe Spherical Roller Bearings, Double-Row, Self-Aligning, Sealed, Torque Tube Design, Light Duty - Inch Series First Edition Aerospace - Airframe Spherical Roller Bearings, Double-Row, Self-Aligning, Sealed, Plain Inner Ring, Heavy Duty - Inch Series First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

14197 14201 14202 14203 14204 14206 14207 14208 14209 14210

Aerospace - Airframe Spherical Roller Bearings, Single-Row, Self-Aligning, Sealed, Intermediate Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Double-Row, Self-Aligning, Diameter Series 2 - Metric Series First Edition Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Diameter Series 0 and 2 - Metric Series First Edition Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Diameter Series 8 and 9 - Metric Series First Edition Aerospace - Airframe Ball Bearings, Double-Row, Rigid, Diameter Series 0 - Metric Series First Edition Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Sealed, Light Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Sealed, Light Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Sealed, Intermediate Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Precision, Sealed, Intermediate Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Sealed, Torque Tube Design, Light Duty - Inch Series First Edition

ISO

14211

Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Precision, Sealed Torque Tube Design, Light Duty - Inch Series First Edition

ISO

14212

ISO ISO ISO ISO ISO ISO

14213 14214 14215 14216 14217 14218

Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Sealed, Torque Tube Design, Extra-Light Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Single-Row, Rigid, Precision, Sealed, Torque Tube Design, Extra-Light Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Double-Row, Rigid, Sealed, Heavy Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Double-Row, Rigid, Precision, Sealed, Heavy Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Double-Row, Self-Aligning, Sealed, Heavy Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Double-Row, Self-Aligning, Precision, Sealed, Heavy Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Single-Row, Self-Aligning, Sealed, Heavy Duty - Inch Series First Edition

ISO ISO ISO ISO

14219 14220 14221 14223-1

Aerospace - Airframe Ball Bearings, Single-Row, Self-Aligning, Precision, Sealed, Heavy Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Single-Row, Self-Aligning, Sealed, Light Duty - Inch Series First Edition Aerospace - Airframe Ball Bearings, Single-Row, Self-Aligning, Precision, Sealed, Light Duty - Inch Series First Edition Radiofrequency identification of animals Advanced transponders Part 1: Air interface First Edition Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment Second Edition Small Craft - Magnetic Compasses First Edition Road vehicles Unified diagnostic services (UDS) Specification and requirements Second Edition Road Vehicles - Diagnostic Systems - Keyword Protocol 2000 - Part 1: Physical Layer First Edition Road Vehicles - Diagnostic Systems - Keyword Protocol 2000 - Part 2: Data Link Layer First Edition Road Vehicles - Diagnostic Systems - Keyword Protocol 2000 - Part 3: Application Layer First Edition

ISO ISO ISO ISO ISO ISO

14224 14227 14229 14230-1 14230-2 14230-3

ISO ISO ISO ISO ISO

14230-4 14231 14232 14233 14235

ISO

14236

ISO

14237

ISO

14238

ISO ISO ISO

14239 14240-1 14240-2

ISO ISO

14242-1 14242-2

ISO ISO

14243-1 14243-2

Road Vehicles - Diagnostic Systems - Keyword Protocol 2000 - Part 4: Requirements for Emission-Related Systems First Edition Thermal Spraying - Acceptance Inspection of Thermal Spraying Equipment First Edition Thermal Spraying - Powders - Composition and Technical Supply Conditions First Edition Dentistry - Polymer-Based Die Materials First Edition Soil Quailty - Determination of Organic Carbon by Sulfochromic Oxidation First Edition Plastics Pipes and Fittings - Mechanical-Joint Compression Fittings for Use with Polyethylene Pressure Pipes in Water Supply Systems First Edition Surface Chemical Analysis - Secondary-Ion Mass Spectrometry - Determination of Boron Atomic Concentration in Silicon Using Uniformly Doped Materials First Edition Soil Quality - Biological Methods - Determination of Nitrogen Mineralization and Nitrification in Soils and the Influence of Chemicals on These Processes First Edition Soil Quality - Laboratory Incubation Systems for Measuring the Mineralization of Organic Chemicals in Soil Under Aerobic Conditions First Edition; BS 7755: Subsection 4.4.4: 1997 Soil Quality - Determination of Soil Microbial Biomass - Part 1: Substrate-Induced Respiration Method First Edition Soil Quality - Determination of Soil Microbial Biomass - Part 2: Fumigation-Extraction Method First Edition Implants for Surgery - Wear of Total Hip-Joint Prostheses - Part 1: Loading and Displacement Parameters for Wear-Testing Machines and Corresponding Environmental Conditions for Test First Edition Implants for Surgery - Wear of Total Hip-Joint Prostheses - Part 2: Methods of Measurement First Edition Implants for Surgery - Wear of Total Knee-Joint Prostheses - Part 1: Loading and Displacement Parameters for Wear-Testing Machines with Load Control and Corresponding Environmental Conditions for Test First Edition Implants for Surgery - Wear of Total Knee-Joint Prostheses - Part 2: Methods of Measurement First Edition

ISO

14243-3 CORR 1

Implants for surgery ù Wear of total knee-joint prostheses ù Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test TECHNICAL CORRIGENDUM 1 First Edition

ISO ISO ISO ISO ISO

14243-3 14245 14246 14250 14251

ISO ISO

14253-1 14254

ISO

14255

ISO

14256-2

ISO

14257

Implants for surgery ù Wear of total knee-joint prostheses ù Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test First Edition Gas cylinders Specifications and testing of LPG cylinder valves Self-closing First Edition Transportable Gas Cylinders - Gas Cylinder Valves - Manufacturing Tests and Inspections First Edition Steel - Metallographic Characterization of Duplex Grain Size and Distribution First Edition Information Technology - Data Interchange on 12,7 mm 36-Track Magnetic Tape Cartridges First Edition Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment - Part 1: Decision Rules for Proving Conformance or Non-Conformance with Specifications First Edition Soil Quality - Determination of Exchangeable Acidity in Barium Chloride Extracts First Edition Soil Quality - Determination of Nitrate Nitrogen, Ammonium Nitrogen and Total Soluble Nitrogen in Air-Dry Soils Using Calcium Chloride Solution as Extractant First Edition Soil quality Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution Part 2: Automated method with segmented flow analysis First Edition Acoustics - Measurement and Parametric Description of Spatial Sound Distribution Curves in Workrooms for Evaluation of Their Acoustical Performance First Edition

ISO ISO

14258 14268

Industrial Automation Systems - Concepts and Rules for Enterprise Models First Edition; Technical Corrigendum 1: 02-15-2000 Leather Physical and mechanical tests Determination of water vapour permeability First Edition; IULTCS/IUP 15

ISO

14269-1

ISO

14269-2

ISO

14269-3

ISO

14269-4

ISO

14269-5

ISO

14270

Tractors and Self-Propelled Machines for Agriculture and Forestry - Operator Enclosure Environment - Part 1: Vocabulary Tracteurs Et Machines Automotrices Pour L'Agriculture Et La Sylviculture - Ambiance Dans L'Enceinte De L'Operateur - Partie 1: Vocabulaire First Edition; Along with Other Parts of ISO 14269, Cancels and Replaces ISO 3737: 1976, ISO 6097: 1989 and ISO/TR 8953: 1987 Tractors and Self-Propelled Machines for Agriculture and Forestry - Operator Enclosure Environment - Part 2: Heating, Ventilation and Air-Conditioning Test Method and Performance First Edition; Along with Other Parts of ISO 14269, Cancels and Replaces ISO 3737: 1976, ISO 6097: 1989 and ISO/TR 8953: 1987 Tractors and Self-Propelled Machines for Agriculture and Forestry - Operator Enclosure Environment - Part 3: Determination of Effect of Solar Heating First Edition; Along with Other Parts of ISO 14269, Cancels and Replaces ISO 3737: 1976, ISO 6097: 1989 and ISO/TR 8953: 1987 Tractors and Self-Propelled Machines for Agriculture and Forestry - Operator Enclosure Environment - Part 4: Air Filter Element Test Method First Edition; Along with Other Parts of ISO 14269, Cancels and Replaces ISO 3737: 1976, ISO 6097: 1989 and ISO/TR 8953: 1987 Tractors and Self-Propelled Machines for Agriculture and Forestry - Operator Enclosure Environment - Part 5: Pressurization System Test Method First Edition; Along with Other Parts of ISO 14269, Cancels and Replaces ISO 3737: 1976, ISO 6097: 1989 and ISO/TR 8953: 1987 Specimen Dimensions and Procedure for Mechanized Peel Testing Resistance Spot, Seam and Embossed Projection Welds First Edition

ISO

14271

Vickers Hardness Testing of Resistance Spot, Projection and Seam Welds (Low Load and Microhardness) First Edition

ISO

14272

Specimen Dimensions and Procedure for Cross Tension Testing Resistance Spot and Embossed Projection Welds First Edition

ISO ISO ISO ISO ISO ISO ISO ISO

14273 14275 14276 14277 14278 14279 14280 14281

ISO ISO ISO ISO ISO

14284 14300-1 14300-2 14302 14303

ISO

14310

ISO

DIS 14310

Specimen Dimensions and Procedure for Shear Testing Resistance Spot, Seam and Embossed Projection Welds First Edition Aerospace - Drives, Internal, Offset Cruciform, Ribbed - Metric Series First Edition Aerospace - Drives, Internal, Offset Cruciform - Metric Series First Edition Aerospace Drivers, Ribbed, for Internal Offset Cruciform Ribbed or Unribbed Drives Metric Series First Edition Aerospace Gauges, for Internal Offset Cruciform Ribbed or Unribbed Drives Metric Series First Edition Aerospace Drives, Internal, Cruciform Metric Series First Edition Aerospace Drivers, Ribbed, for Internal Cruciform Ribbed or Unribbed Drives Metric Series First Edition Aerospace Gauges, for Internal Cruciform Ribbed or Unribbed Drives Metric Series Frist Edition Steel and Iron - Sampling and Preparation of Samples for the Determination of Chemical Composition First Edition; Replaces ISO 377-2: 1989 Space Systems - Programme Management - Part 1: Structuring of a Programme First Edition Space Systems - Programme Management - Part 2: Product Assurance First Edition Space systems - Electromagnetic compatibility requirements First Edition Space Systems - Launch-Vehicle-To-Spacecraft Interfaces First Edition Petroleum and Natural Gas Industries - Downhole Equipment - Packers and Bridge Plugs First Edition/ Cobranded with API SPEC 11D1 Petroleum and natural gas industries ù Downhole equipment ù Packers and bridge plugs [Superseded By: DS DS/EN ISO 14310, DS DSF/PREN ISO 14310 REV]

ISO ISO ISO ISO ISO

14313 FDIS 14313 14314 14315 14317

ISO ISO

14323 14324

ISO

14327

ISO

14329

Petroleum and Natural Gas Industries - Pipeline Transportation Systems - Pipeline Valves First Edition /Cobranded with API Spec 6D Petroleum and natural gas industries ù Pipeline transportation systems ù Pipeline valves Reciprocal internal combustion engines Recoil starting equipment General safety requirements First Edition Industrial Wire Screens - Technical Requirements and Testing First Edition Sintered metal materials excluding hardmetals Determination of compressive yield strength First Edition Resistance spot welding and projection welds Destructive testing of welds Specimen dimensions and procedure for impact shear test and cross-tension testing First Edition Resistance spot welding Destructive tests of welds Method for the fatigue testing of spot welded joints First Edition Resistance welding Procedures for determining the weldability lobe for resistance spot, projection and seam welding First Edition Resistance welding Destructive tests of welds Failure types and geometric measurements for resistance spot, seam and projection welds First Edition

Welding consumables Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification First edition Welding Consumables - Wire Electrodes, Wires and Rods for Arc Welding of Stainless and Heat Resisting Steels - Classification First Edition Welding and Allied Processes - Flux and Gas Shielded Electronical Welding Processes - Procurement Guidelines for Consumables First Edition Dentistry - Duplicating Materials First Edition Winter-Sports Equipment - Marking of Parts Made of Polymer Materials First Edition

ISO

14341

ISO

14343

ISO ISO ISO

14344 14356 14359

ISO ISO ISO

14368-1 14368-2 14368-3

ISO ISO

14372 14373

ISO ISO

14377 14378

ISO

14396

ISO

14397-1

ISO

14397-2

ISO ISO ISO ISO ISO ISO

14400 14401-1 14401-2 14402 14403 14408

ISO

14416

Road vehicles Wheels and rims Use, general maintenance and safety requirements and out-of-service conditions First edition Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 1: Test methods First Edition Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria First Edition Water Quality - Determination of Phenol Index by Flow Analysis (FIA and CFA) First Edition Water Quality - Determination of Total Cyanide and Free Cyanide by Continuous Flow Analysis First Edition Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information Second edition Information and documentation Requirements for binding of books, periodicals, serials and other paper documents for archive and library use Methods and materials First Edition

ISO ISO

14417 14419

Information Technology - Data Recording Format DD-1 for Magnetic Tape Cassette Conforming to ISO/IEC 1016 First Edition Textiles - Oil Repellency - Hydrocarbon Resistance Test First Edition; Technical Corrigendum 1: 09/15/2004

Mineral and Sapphire Watch-Glasses - Part 1: Dimensions and Tolerances First Edition; Technical Corrigendum 1: 01/15/2006 Mineral and Sapphire Watch-Glasses - Part 2: Assembly to the Case by Adhesive or Using a Gasket First Edition Mineral and sapphire watch-glasses Part 3: Qualitative criteria and test methods First Edition Welding Consumables - Determination of Moisture Resistance of Manual Metal Arc Welding Electrodes by Measurement of Diffusible Hydrogen First Edition Resistance welding Procedure for spot welding of uncoated and coated low carbon steels First Edition Canned Evaporated Milk - Determination of Tin Content - Method Using Graphite Furnance Atomic Absorption Spectrometry First Edition; IDF 168 Milk and Dried Milk - Determination of Iodide Content - Method Using High-Performance Liquid Chromatography First Edition Reciprocating Internal Combustion Engines - Determination and Method for the Measurement of Engine Power - Additional Requirements for Exhaust Emission Tests in Accordance with ISO 8178 First Edition; Replaces ISO TR 14396 Earth-moving machinery ù Loaders and backhoe loaders ù Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load Second Edition Earth-moving machinery ù Loaders and backhoe loaders ù Part 2: Test method for measuring breakout forces and lift capacity to maximum lift height Second Edition

ISO ISO

14420 14422

ISO

14427

ISO

14428

ISO ISO

14435 14438

ISO

14442

ISO

14443-1

ISO

14443-2

ISO

14443-3

ISO

14443-3 FDAM 3

ISO

14443-4

ISO

14443-4 FDAM 1

ISO ISO

14446 14453

ISO

14460

ISO

14461-1

ISO ISO ISO

14461-2 14469-1 14469-3

Carbonaceous products for the production of aluminium Baked anodes and shaped carbon products Determination of the coefficient of linear thermal expansion First Edition Carbonaceous Materials Used in the Production of Aluminium - Cold-Ramming Pastes - Methods of Sampling First Edition Carbonaceous materials used in the production of aluminium Cold and tepid ramming pastes Preparation of unbaked test specimens and determination of apparent density after compaction First Edition Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking First Edition Carbonaceous materials for the production of aluminium Petroleum coke Determination of trace metals by inductively coupled plasma atomic emission spectrometry First Edition Glass in Building - Determination of Energy Balance Value - Calculation Method First Edition Water quality Guidelines for algal growth inhibition tests with poorly soluble materials, volatile compounds, metals and waste water Second Edition Identification Cards - Contactless Integrated Circuit(s) Cards - Proximity Cards - Part 1: Physical Characteristics First Edition Identification Cards - Contactless integrated circuit(s) cards - Proximity cards - Part 2: Radio frequency power and signal interface First Edition; Amendment 1: 06/01/2005 Identification Cards - Contactless integrated circuit(s) cards - Proximity cards - Part 3: Initialization and anticollision AMENDMENT 3: Handling of reserved fields and values First Edition; Amendment 1: 06/01/2005; Amendment 3: 3/15/2006; Technical Corrigendum 1: 09/01/2006 Identification cards Contactless integrated circuit(s) cards Proximity cards Part 3: Initialization and anticollision AMENDMENT 3: Handling of reserved fields and values 2001 Identification Cards - Contactless Integrated Circuit(s) Cards - Proximity Cards - Part 4: Transmission Protocol First Edition; Amendment 1: 3/15/2006 Identification cards Contactless integrated circuit(s) cards Proximity cards Part 4: Transmission protocol AMENDMENT 1: Handling of reserved fields and values 2001 Binders for Paints and Varnishes - Determination of the Viscosity of Industrial Cellulose Nitrate Solutions and Classification of Such Solutions First Edition Pulps - Determination of Acetone-Soluble Matter First Edition; Cancels and Replaces ISO 624: 1974 Protective Clothing for Automobile Racing Drivers - Protection Against Heat and Flame - Performance Requirements and Test Methods First Edition; Amendment 1: 03/15/2002 Milk and milk products Quality control in microbiological laboratories Part 1: Analyst performance assessment for colony counts First edition Milk and milk products Quality control in microbiological laboratories Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps First edition Road vehicles Compressed natural gas (CNG) refuelling connector Part 1: 20 MPa (200 bar) connector First Edition Road vehicles Compressed natural gas (CNG) refuelling connector Part 3: 25 MPa (250 bar) connector First Edition

ISO

14473

Information Technology - Office Equipment - Minimum Information to Be Specified for Image Scanners First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Functional Requirements for Static Circuit-Mode Inter-PINX Connections First Edition

ISO

14474

ISO

14476-1

ISO

14476-2

ISO

14478-1

ISO

14478-2

ISO

14478-3

ISO ISO

14478-4 14487

Information Technology - Enhanced Communications Transport Protocol: Specification of Simplex Multicast Transport First Edition Information technology Enhanced communications transport protocol: Specification of QoS management for simplex multicast transport First Edition Information Technology - Computer Graphics and Image Processing - Presentation Environment for Multimedia Objects (PREMO) Part 1: Fundamentals of PREMO First Edition Information Technology - Computer Graphics and Image Processing - Presentation Environment for Multimedia Objects (PREMO) Part 2: Foundation Component First Edition; Corrected and Reprinted 09/15/2000 Information Technology - Computer Graphics and Image Processing - Presentation Environment for Multimedia Objects (PREMO) Part 3: Multimedia Systems Services First Edition Information Technology - Computer Graphics and Image Processing - Presentation Environment for Multimedia Objects (PREMO) Part 4: Modelling, Rendering and Interaction Component First Edition Pulps - Standard Water for Physical Testing First Edition

ISO

14490-1

Optics and optical instruments - Test methods for telescopic systems - Part 1: Test methods for basic characteristics First Edition

ISO

14490-2

Optics and optical instruments Test methods for telescopic systems Part 2: Test methods for binocular systems First Edition

ISO

14490-3

Optics and optical instruments Test methods for telescopic systems Part 3: Test methods for telescopic sights First Edition

ISO ISO

14490-4 14490-5

Optics and optical instruments Test methods for telescopic systems Part 4: Test methods for astronomical telescopes First Edition Optics and optical instruments - Test methods for telescopic systems - Part 5: Test methods for transmittance First Edition

ISO

14490-6

Optics and optical instruments Test methods for telescopic systems Part 6: Test methods for veiling glare index First Edition

ISO

14490-7

ISO

14492

ISO

14495-1

ISO ISO

14495-2 14496-1 CORR 2

Optics and optical instruments Test methods for telescopic systems Part 7: Test methods for limit of resolution First Edition Information technology Lossy/lossless coding of bi-level images AMENDMENT 1: Encoder First Edition; Amendment 2: 12/15/2003; Amendment 1: 12/15/2004 Information Technology - Lossless and Near-Lossless Compression of Continuous-Tone Still Images: Baseline First Edition; Corrected and Reprinted 09/15/2000 Information Technology - Lossless and Near-Lossless Compression of Continuous-Tone Still Images - Part 2: Extensions Second Edition Information technology ù Coding of audio-visual objects ù Part 1: Systems TECHNICAL CORRIGENDUM 2 Third Edition

ISO

14496-1 AMD 2

ISO ISO ISO

14496-1 AMD 1 14496-1 14496-1 FDAM 3

Information technology ù Coding of audio-visual objects ù Part 1: Systems AMENDMENT 2: 3D compression profile and level indication Third Edition Information technology ù Coding of audio-visual objects ù Part 1: Systems AMENDMENT 1: Text profile and level indication Third Edition Information technology ù Coding of audio-visual objects ù Part 1: Systems Third Edition Information technology ù Coding of audio-visual objects ù Part 1: Systems AMENDMENT 3: JPEG 2000 support in MPEG-4

ISO

14496-2 AMD 3

Information technology ù Coding of audio-visual objects ù Part 2: Visual AMENDMENT 3: Support for colour spaces Third Edition

ISO ISO

14496-2 AMD 2 14496-2 CORR 1

ISO ISO

14496-2 AMD 1 14496-2

ISO

14496-3 AMD 5

ISO

14496-3 AMD 1

ISO

14496-3 CORR 1

ISO

14496-3 AMD 3

ISO ISO

14496-3 AMD 2 14496-3

ISO

14496-3 FDAM 5

ISO

14496-4 CORR 1

ISO

14496-4 AMD 15

ISO

14496-4 AMD 17

ISO

14496-4 AMD 12

Information technology ù Coding of audio-visual objects ù Part 2: Visual AMENDMENT 2: New levels for simple profile Third Edition Information technology ù Coding of audio-visual objects ù Part 2: Visual TECHNICAL CORRIGENDUM 1 Third Edition Information technology ù Coding of audio-visual objects ù Part 2: Visual AMENDMENT 1: Error resilient simple scalable profile Third Edition Information technology ù Coding of audio-visual objects ù Part 2: Visual Third Edition Information technology ù Coding of audio-visual objects ù Part 3: Audio AMENDMENT 5: BSAC extensions and transport of MPEG Surround Third Edition Information technology ù Coding of audio-visual objects ù Part 3: Audio AMENDMENT 1: Low delay AAC profile Third Edition Information technology ù Coding of audio-visual objects ù Part 3: Audio AMENDMENT 2: Audio Lossless Coding (ALS), new audio profiles and BSAC extensions TECHNICAL CORRIGENDUM 1 Third Edition Information technology ù Coding of audio-visual objects ù Part 3: Audio AMENDMENT 3: Scalable Lossless Coding (SLS) Third Edition Information technology ù Coding of audio-visual objects ù Part 3: Audio AMENDMENT 2: Audio Lossless Coding (ALS), new audio profiles and BSAC extensions Third Edition Information technology ù Coding of audio-visual objects ù Part 3: Audio Third Edition Information technology ù Coding of audio-visual objects ù Part 3: Audio AMENDMENT 5: BSAC extensions and transport of MPEG Surround Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 6: Advanced Video Coding conformance TECHNICAL CORRIGENDUM 1 Second edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 15: Lossless coding of oversampled audio Second edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 17: Advanced text and 2D graphics conformance Second edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 12: Morphing& Textures conformance Second edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

14496-4 CORR 2

Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing TECHNICAL CORRIGENDUM 2 First Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 13: Parametric coding for high 14496-4 AMD 13 quality audio conformance 14496-4 CORR 2 Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 11: Parametric stereo TO AMD 11 conformance TECHNICAL CORRIGENDUM 2 Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing TECHNICAL CORRIGENDUM 3 Second 14496-4 CORR 3 Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 11: Parametric stereo 14496-4 AMD 11 conformance Second Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 9: AVC fidelity range 14496-4 AMD 9 extensions conformance Second Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 10: Conformance extensions 14496-4 AMD 10 for simple profile levels 4a and 5 Second Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing TECHNICAL CORRIGENDUM 1 Second 14496-4 CORR 1 Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 6: Advanced Video Coding 14496-4 AMD 6 conformance Second Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 8: High Efficiency Advanced 14496-4 AMD 8 Audio Coding, audio BIFS, and structured audio conformance Second Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 7: AFX conformance 14496-4 AMD 7 extensions Second Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 5: Conformance extensions for 14496-4 AMD 5 error-resilient simple scalable profile Second Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 4: IPMPX conformance 14496-4 AMD 4 extensions Second Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 3: Visual new levels and tools 14496-4 AMD 3 Second Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 2: MPEG-4 conformance 14496-4 AMD 2 extensions for XMT and media nodes Second Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 1: Conformance testing for 14496-4 AMD 1 MPEG-4 Second Edition 14496-4 Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing Second Edition Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 19: Audio lossless coding 14496-4 FDAM 19 (ALS)

ISO ISO ISO ISO

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 18: Conformance of MPEG-1/2 14496-4 FDAM 18 Audio in MPEG-4 14496-4 FDAM 14 Information technology ù Coding of audio-visual objects ù Part 4: Conformance testing AMENDMENT 14: BSAC conformance Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 9: Morphing& Textures 14496-5 AMD 9 reference software Second Edition 14496-5 AMD 10 Information technology Coding of audio-visual objects Part 5: Reference software Second Edition Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 6: Advanced Video Coding (AVC) and High Efficiency Advanced Audio Coding (HE AAC) reference software TECHNICAL CORRIGENDUM 1 Second Edition Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 8: AVC fidelity range extensions 14496-5 AMD 8 reference software Second Edition Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 6: Advanced Video Coding 14496-5 AMD 6 (AVC) and High Efficiency Advanced Audio Coding (HE AAC) reference software Second Edition Information technology Coding of audio-visual objects Part 5:Reference software AMENDMENT 7: AFX reference software 14496-5 AMD 7 extensions Second Edition Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 5: Reference software 14496-5 AMD 5 extensions for error resilient simple scalable profile Second Edition Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 4: IPMPX reference software 14496-5 AMD 4 extensions Second Edition Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 3: Visual new level and tools 14496-5 AMD 3 Second Edition Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 2: MPEG-4 reference software 14496-5 AMD 2 extensions for XMT and media nodes Second Edition Information technology Coding of audio-visual objects Part 5: Reference software AMENDMENT 1: Reference software for MPEG-4 14496-5 AMD 1 Second Edition 14496-5 Information Technology - Coding of Audio-Visual Objects - Part 5: Reference Software Second Edition Information technology ù Coding of audio-visual objects Part 5: Reference software AMENDMENT 11: MPEG-J GFX Reference 14496-5 FDAM 11 software Information technology ù Coding of audio-visual objects ù Part 5: Reference software AMENDMENT 12: Updated file format 14496-5 FDAM 12 reference software 14496-5 CORR 1

ISO

14496-6

Information Technology - Coding of Audio-Visual Objects - Part 6: Delivery Multimedia Integration Framework (DMIF) Second Edition

ISO

14496-8

Information technology Coding of audio-visual objects Part 8: Carriage of ISO/IEC 14496 contents over IP networks First Edition

ISO

14496-10 AMD 1

ISO ISO

14496-10 CORR 2 14496-10

ISO

14496-10 FDAM 2

ISO ISO

14496-11 AMD 5 14496-11

ISO

14496-12 CORR 3

ISO

14496-12 AMD 1

ISO

14496-12 CORR 2

ISO

14496-12 CORR 1

ISO

14496-12

ISO

14496-13

ISO ISO ISO ISO ISO ISO ISO ISO ISO

Information technology ù Coding of audio-visual objects ù Part 10: Advanced Video Coding AMENDMENT 1: Support for colour spaces and aspect ratio definitions Third Edition Information technology ù Coding of audio-visual objects ù Part 10: Advanced Video Coding TECHNICAL CORRIGENDUM 2 Third Edition Information technology ù Coding of audio-visual objects ù Part 10: Advanced Video Coding Third Edition Information technology ù Coding of audio-visual objects Part 10: Advanced Video Coding AMENDMENT 2: New profiles for professional applications Information technology ù Coding of audio-visual objects ù Part 11: Scene description and application engine AMENDMENT 5: Support for Symbolic Music Notation First edition Information technology Coding of audio-visual objects Part 11: Scene description and application engine First edition Information technology ù Coding of audio-visual objects ù Part 12: ISO base media file format TECHNICAL CORRIGENDUM 3 Second edition Information technology ù Coding of audio-visual objects ù Part 12: ISO base media file format AMENDMENT 1: Support for timed metadata, non-square pixels and improved sample groups Second edition Information technology ù Coding of audio-visual objects ù Part 12: ISO base media file format TECHNICAL CORRIGENDUM 2 Second edition Information technology ù Coding of audio-visual objects ù Part 12: ISO base media file format TECHNICAL CORRIGENDUM 1 Second edition Information technology Coding of audio-visual objects Part 12: ISO base media file format Second edition; Corrected Version 10/1/2005 Information technology Coding of audio-visual objects Part 13: Intellectual Property Management and Protection (IPMP) extensions First Edition

14496-14 CORR 1 Information technology ù Coding of audio-visual objects ù Part 14: MP4 file format TECHNICAL CORRIGENDUM 1 First Edition 14496-14 Information technology Coding of audio-visual objects Part 14: MP4 file format First Edition Information technology ù Coding of audio-visual objects ù Part 15: Advanced Video Coding (AVC) file format TECHNICAL 14496-15 CORR 2 CORRIGENDUM 2 First Edition Information technology ù Coding of audio-visual objects ù Part 15: Advanced Video Coding (AVC) file format AMENDMENT 1: 14496-15 AMD 1 Support for FRExt First Edition Information technology ù Coding of audio-visual objects ù Part 15: Advanced Video Coding (AVC) file format TECHNICAL 14496-15 CORR 1 CORRIGENDUM 1 First Edition 14496-15 Information technology ù Coding of audio-visual objects ù Part 15: Advanced Video Coding (AVC) file format First Edition Information technology ù Coding of audio-visual objects ù Part 16: Animation Framework eXtension (AFX) AMENDMENT 1: 14496-16 AMD 1 Geometry and shadow Second Edition 14496-16 Information technology Coding of audio-visual objects Part 16: Animation Framework eXtension (AFX) Second Edition 14496-17 Information technology Coding of audio-visual objects Part 17: Streaming text format First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

14496-18 TECH CORR 1 14496-18 14496-19

Information technology - Coding of audio-visual objects Part 18: Font compression and streaming Information technology Coding of audio-visual objects Part 18: Font compression and streaming First Edition Information technology Coding of audio-visual objects Part 19: Synthesized texture stream First Edition Information technology ù Coding of audio-visual objects ù Part 20: Lightweight Application Scene Representation (LASeR) and 14496-20 CORR 1 Simple Aggregation Format (SAF) First Edition Information technology Coding of audio-visual objects Part 20: Lightweight Application Scene Representation (LASeR) and Simple 14496-20 Aggregation Format (SAF) First Edition Information technology ù Coding of audio-visual objects ù Part 21: MPEG-J Graphics Framework eXtensions (GFX) TECHNICAL 14496-21 CORR 1 CORRIGENDUM 1 14496-21 Information technology Coding of audio-visual objects Part 21: MPEG-J Graphics Framework eXtensions (GFX) 14496-22 Information technology ù Coding of audio-visual objects ù Part 22: Open Font Format First Edition Textile machinery and accessories Harnesses for Jacquard weaving machines Vocabulary MatÚriel pour l'industrie textile et 14500 accessoires Harnais pour mÚtiers Ó tisser Jacquard Vocabulaire First Edition Milk and Milk Powder - Determination of Aflatoxin M1 Content - Clean-Up by Immunoaffinity Chromatography and Determination by 14501 High-Performance Liquid Chromatography First Edition Determination of substances characteristic of green and black tea ù Part 1: Content of total polyphenols in tea ù Colorimetric method 14502-1 CORR 1 using Folin-Ciocalteu reagent TECHNICAL CORRIGENDUM 1 First Edition Determination of substances characteristic of green and black tea ù Part 1: Content of total polyphenols in tea ù Colorimetric method 14502-1 using Folin- Ciocalteu reagent First edition Determination of substances characteristic of green and black tea ù Part 2: Content of catechins in green tea ù Method using high14502-2 CORR 1 performance liquid chromatography TECHNICAL CORRIGENDUM 1 First Edition Determination of substances characteristic of green and black tea ù Part 2: Content of catechins in green tea ù Method using high14502-2 performance liquid chromatography First edition Ergonomics of the thermal environment ù Evaluation of thermal environments in vehicles ù Part 2: Determination of equivalent 14505-2 CORR 1 temperature - TECHNICAL CORRIGENDUM 1 First Edition Ergonomics of the thermal environment Evaluation of thermal environments in vehicles Part 2: Determination of equivalent 14505-2 temperature First Edition Ergonomics of the thermal environment Evaluation of thermal environments in vehicles Part 3: Evaluation of thermal comfort using 14505-3 human subjects First Edition 14507 Soil Quality - Pretreatment of Samples for Determination of Organic Contaminants First Edition 14508 Road Vehicles - Spark-Plugs - Terminals Second Edition

ISO

14509

Small Craft - Measurement of Airborne Sound Emitted by Powered Recreational Craft First Edition; Amendment 1: 09/15/2004

ISO

14509-2

Small craft Airborne sound emitted by powered recreational craft Part 2: Sound assessment using reference craft First Edition

ISO ISO ISO ISO

14511 14512 14513 CORR 1 14513

Measurement of Fluid Flow in Closed Conduits - Thermal Mass Flowmeters First Edition Passenger Cars - Straight-Ahead Braking on Surfaces with Split Coefficient of Friction - Open-loop Test Method First Edition Road vehicles - Pedestrian protection - Head impact test method - TECHNICAL CORRIGENDUM 1 First Edition Road vehicles Pedestrian protection Head impact test method First Edition Information technology Portable Operating System Interface (POSIX) Test methods for measuring conformance to POSIX Part 1: System interfaces First Edition; IEEE 2003.1: 2000; Amendment 1:12/15/2003 Information Technology - 130 mm Optical Disk Cartridges for Information Interchange - Capacity: 2,6 Gbytes per Cartridge First Edition; Corrected and Reprinted 07/15/1998 Cranes Requirements for test loads First Edition Information Technology - POSIX Ada Language Interfaces - Binding for System Application Program Interface (API) Second Edition; IEEE Std 1003.5b Gaseous fire-extinguishing systems ù Physical properties and system design ù Part 1: General requirements TECHNICAL CORRIGENDUM 1 Second Edition Gaseous fire-extinguishing systems Physical properties and system design Part 1: General requirements Second Edition Gaseous fire-extinguishing systems Physical properties and system design Part 2: CF3I extinguishant Second Edition Gaseous fire-extinguishing systems Physical properties and system design Part 5: FK-5-1-12 extinguishant First Edition

ISO

14515-1

ISO ISO

14517 14518

ISO

14519

ISO ISO ISO ISO

14520-1 CORR 1 14520-1 14520-2 14520-5

ISO ISO

14520-6 14520-8

Gaseous fire-extinguishing systems Physical properties and system design Part 6: HCFC Blend A extinguishant Second Edition Gaseous fire-extinguishing systems Physical properties and system design Part 8: HFC 125 extinguishant Second Edition

ISO ISO

14520-9 14520-10

Gaseous Fire-Extinguishing Systems - Physical Properties and System Design - Part 9: HFC 227ea Extinguishant Second Edition Gaseous fire-extinguishing systems - Physical properties and system design - HFC 23 extinguishant Second Edition

ISO ISO

14520-11 14520-12

Gaseous fire-extinguishing systems - Physical properties and system design - Part 11: HFC 236fa extinguishant Second Edition Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-01 extinguishant Second Edition

ISO ISO

14520-13 14520-14

Gaseous fire-extinguishing systems - Physical properties and system design - Part 13: IG-100 extinguishant Second Edition Gaseous fire-extinguishing systems - Physical properties and system design - Part 14: IG-55 extinguishant Second Edition

ISO ISO

14520-15 14523

Gaseous fire-extinguishing systems - Physical properties and system design - Part 15: IG-541 extinguishant Second Edition Photography - Processed Photographic Materials - Photographic Activity Test for Enclosure Materials First Edition

ISO

14524

ISO

14526-1

Photography - Electronic Still-Picture Cameras - Methods for Measuring Opto-Electronic Conversion Functions (OECFs) First Edition Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 1: Designation System and Basis for Specifications First Edition [Cancelled: ISO 800]

ISO

14526-2

ISO

14526-3

ISO

14527-1

ISO

14527-2

ISO

14527-3

ISO

14528-1

ISO

14528-2

ISO

14528-3

ISO

14529-1

ISO

14529-2

ISO

14529-3

ISO

14530-1

ISO

14530-2

ISO

14530-3

ISO

14531-1

ISO

14531-2

ISO

14531-3

Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties First Edition [Cancelled: ISO 800] Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 3: Requirements for Selected Moulding Compounds First Edition [Cancelled: ISO 800] Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 1: Designation System and Basis for Specifications First Edition; (Together with ISO 14527-2;1999, ISO 14527-3;1999, ISO 145281:1999, ISO 14528-2:1999 and ISO 14528-3:1999 Replaces ISO 2112:1990) Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties First Edition [Cancelled: ISO 2112] Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for Selected Moulding Compounds First Edition [Cancelled: ISO 2112] Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 1: Designation System and Basis for Specifications First Edition [Cancelled: ISO 2112] Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties First Edition [Cancelled: ISO 2112] Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 3: Requirements for Selected Moulding Compounds First Edition [Cancelled: ISO 2112] Plastics - Melamine/Phenolic Powder Moulding Compounds (MF-PMCs) - Part 1: Designation System and Basis for Specifications First Edition [Cancelled: ISO 4896] Plastics - Melamine/Phenolic Powder Moulding Compounds (MF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties First Edition [Cancelled: ISO 4896] Plastics - Melamine/Phenolic Powder Moulding Compounds (MF-PMCs) - Part 3: Requirements for Selected Moulding Compounds First Edition [Cancelled: ISO 4896] Plastics - Unsaturated-Polyester Powder Moulding Compounds (UP-PMCs) - Part 1: Designation System and Basis for Specifications First Edition Plastics - Unsaturated-Polyester Powder Moulding Compounds (UP-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties First Edition Plastics - Unsaturated-Polyester Powder Moulding Compounds (UP-PMCs) - Part 3: Requirements for Selected Moulding Compounds First Edition Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series Specifications Part 1: Pipes First Edition Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series Specifications Part 2: Fittings for heat-fusion jointing First Edition Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series Specifications Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) First Edition

Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series Specifications Part 4: System design and installation guidelines First Edition Natural Gas - Vocabulary Gaz Naturel - Vocabulaire First Edition; Corrigendum 1 5/15/2002 Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Fundamental Requirements Second Edition Photography - Room-Light Loading Packages for Electronic Scanners and Image-Setting Film and Paper Rolls - Dimensions and Related Requirements First Edition Manipulating Industrial Robots - Object Handling with Grasp-Type Grippers - Vocabulary and Presentation of Characteristics Robots Manipulateurs Industriels - Manipulation Des Object Par Prehensures A Pince - Vocalbulair Et Presentation Des Caractertiques First Edition Information technology û Home electronic system (HES) architecture û Part 2-1: Introduction and device modularity First Edition; Supersedes ISO/IEC TR 14543-1 and ISO/IEC TR 14543-2

ISO ISO ISO

14531-4 14532 14534

ISO

14535

ISO

14539

ISO

14543-2-1

ISO

14543-3-1

ISO

14543-3-2

ISO

14543-3-3

ISO

14543-3-4

ISO

14543-3-5

ISO

14543-3-6

ISO ISO ISO ISO

14543-3-7 14545 14546 14548

ISO

14554-1

Information technology û Home electronic system (HES) architecture û Part 3-1: Communication layers û Application layer for network based control of HES Class 1 First Edition; Together With ISO/IEC 14543-3-1: 2006 Supersedes ISO/IEC TR 14543-3: 2000 Information technology û Home electronic system (HES) architecture û Part 3-2: Communication layers û Transport, network and general parts of data link layer for network based control of HES Class 1 First Edition; Together With ISO/IEC 14543-3-2: 2006 Supersedes ISO/IEC TR 14543-3: 2000 Information technology û Home electronic system (HES) architecture û Part 3-3: User process for network based control of HES Class 1 First Edition Information technology û Home electronic system (HES) architecture û Part 3-4: System management û Management procedures for network based control of HES Class 1 First edition Information technology û Home electronic system (HES) architecture û Part 3-5: Media and media dependent layers û Powerline for network based control of HES Class 1 First edition Information technology û Home electronic system (HES) architecture û Part 3-6: Media and media dependent layers û Twisted pair for network based control of HES Class 1 First edition Information technology û Home electronic system (HES) architecture û Part 3-7: Media and media dependent layers û Radio frequency for network based control of HES Class 1 First edition Information Technology - Office Equipment - Method for Measuring Copying Machine Productivity First Edition Photography - Aerial Films and Spools - Dimensions First Edition Photography - Dimensions of Glass Plates First Edition Quality Requirements for Welding - Resistance Welding of Metallic Materials - Part 1: Comprehensive Quality Requirements First Edition

ISO ISO ISO

14554-2 14555 14556

Quality Requirements for Welding - Resistance Welding of Metallic Materials - Part 2: Elementary Quality Requirements First Edition Welding - Arc Stud Welding of Metallic Materials Second Ediiton Steel - Charpy V-Notch Pendulum Impact Test - Instrumented Test Method First Edition; Amendment 1: 07/01/2006

ISO ISO

14556 FDAM 1 14557

Steel Charpy V-notch pendulum impact test Instrumented test method AMENDMENT 1: Annex D Instrumented Charpy V-notch pendulum impact test of sub-size test pieces Fire-Fighting Hoses - Rubber and Plastics Suction Hoses and Hose Assemblies First Edition

ISO ISO

14558 14560

Rubber - Determination of Residual Unsaturation of Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectroscopy First Edition Acceptance sampling procedures by attributes Specified quality levels in nonconforming items per million First Edition

ISO ISO ISO

14565 14567 14568

ISO ISO

14572 14573

ISO ISO

14575 14576

Animal Feeding Stuffs - Determination of Vitamin A Content - Method Using High-Performance Liquid Chromatography First Edition Personal Protective Equipment for Protection Against Falls from a Height - Single-Point Anchor Devices First Edition Information Technology - DXL: Diagram EXchange Language for Tree-Structured Charts First Edition Road vehicles Round, screened and unscreened 60 V and 600 V multi-core sheathed cables Test methods and requirements for basic and high-performance cables Second Edition Snowboard Strap Bindings for Soft Boots - Requirements and Test Methods Corrected Version: 5/15/2003 Information Technology - Microprocessor Systems - Hetergeneous InterConnect (HIC) (Low-Cost, Low-latency Scalable Serial Interconnect for Parallel System Construction) First Edition;IEEE Std 1355 Information technology Synchronous split transfer type system bus (STbus) Logical layer First Edition

ISO

14577-1

ISO

14577-2

ISO

14577-3

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

14577-4 14579 14580 14583 14584 14585 14586 14587 14588 14589 14590

ISO

14592-1

Metallic Materials - Instrumented Indentation Test for Hardness and Materials Parameters - Part 1: Test Methods First Edition Metallic Materials - Instrumented Indentation Test for Hardness and Materials parameters - Part 2: Verification and Calibration of Testing Machines First Edition Metallic Materials - Instrumented Indentation Test for Hardness and Materials Parameters - Part 3: Calibration of Reference Blocks First Edition Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and nonmetallic coatings First Edition Hexalobular Socket Head Cap Screws First Edition Hexalobular Socket Cheese Head Screws First Edition; Corrigendum 1: 10/15/2004 Hexalobular Socket Pan Head Screws First Edition; Corrigendum 1: 10/15/2004 Hexalobular Socket Raised Countersunk Head Screws First Edition Hexalobular Socket Pan Head Tapping Screws First Edition; Technical Corrigendum 1: 05-15-2004 Hexalobular Socket Countersunk Head Tapping Screws First Edition Hexalobular Socket Raised Conutersunk (Oval) Head Tapping Screws First Edition Blind Rivets - Terminology and Definitions Rivets Aveugles - Terminologie Et Definitions First Edition Blind Rivets - Mechanical Testing First Edition Cold-reduced steel sheet of high tensile strength and low yield point with improved formability Second Edition Water quality Evaluation of the aerobic biodegradability of organic compounds at low concentrations Part 1: Shake-flask batch test with surface water or surface water/sediment suspensions First Edition; Corrected Version 08/01/03

ISO

14592-2

ISO

14593

ISO

14594

ISO

14595

ISO

14596

ISO ISO ISO ISO ISO ISO ISO ISO

14597 14598-1 14598-2 14598-3 14598-4 14598-5 14598-6 14602

ISO ISO

14606 14607

ISO ISO

14612 14615

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

14616 14617-1 14617-2 14617-3 14617-4 14617-5 14617-6 14617-7 14617-8 14617-9

Water quality Evaluation of the aerobic biodegradability of organic compounds at low concentrations Part 2: Continuous flow river model with attached biomass First Edition; Corrected Version 08/01/2003 Water Quality - Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium - Method by Analysis of Inorganic Carbon in Sealed Vessels (CO2 Headspace Test) First Edition Microbeam analysis Electron probe microanalysis Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy First Edition Microbeam Analysis - Electron Probe Microanalysis - Guidelines for the Specification of Certified Reference Materials (CRMs) First Edition Petroleum Products - Determination of Sulfur Content - Wavelength-Dispersive X-Ray Fluorescence Spectrometry Second Edition Petroleum Products - Determination of Vanadium and Nickel Content - Wavelength-Dispersive X-Ray Fluorescence Spectrometry First Edition Information Technology - Software Product Evaluation - Part 1: General Overview First Edition Software Engineering - Product Evaluation - Part 2: Planning and Management First Edition Software Engineering - Product Evaluation - Part 3: Process for Developers First Edition Software Engineering - Product Evaluation - Part 4: Process for Acquirers First Edition Information Technology - Software Product Evaluation - Part 5: Process for Evaluators First Edition Software Engineering - Product Evaluation - Part 6: Documentation of Evaluation Modules First Edition Non-Active Surgical Implants - Implants for Osteosynthesis - Particular Requirements First Edition Surface Chemical Analysis - Sputter Depth Profiling - Optimization Using Layered Systems as Reference Materials First Edition Non-active surgical implants ù Mammary implants ù Particular requirements Second Edition Ships and marine technology Ship┤s bridge layout and associated equipment Requirements and guidelines for centralized and integrated bridge functions First Edition Adhesives - Durability of Structural Adhesive Joints - Exposure to Humidity and Temperature Under Load First Edition Plastics - Heatshrinkable Films of Polyethylene, Ethylene Copolymers and their Mixtures - Determination of Shrinkage Stress and Contraction Stress First Edition Graphical symbols for diagrams Part 1: General information and indexes Second Edition Graphical Symbols for Diagrams - Part 2: Symbols Having General Application First Edition Graphical Symbols for Diagrams - Part 3: Connections and Related Devices First Edition Graphical Symbols for Diagrams - Part 4: Actuators and Related Devices First Edition Graphical Symbols for Diagrams - Part 5: Measurement and Control Devices First Edition; Corrected Version: 08/01/2003 Graphical Symbols for Diagrams - Part 6: Measurement and Control Functions First Edition Graphical Symbols for Diagrams - Part 7: Basic Mechanical Components First Edition Graphical Symbols for Diagrams - Part 8: Valves and Dampers First Edition Graphical Symbols for Diagrams - Part 9: Pumps, Compressors and Fans First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

14617-10 14617-11 14617-12 14617-13 14617-14 14617-15 14619 14620-1 14620-2 14620-3 14621-1

Graphical Symbols for Diagrams - Part 10: Fluid Power Converters First Edition Graphical Symbols for Diagrams - Part 11: Devices for Heat Transfer and Heat Engines First Edition Graphical Symbols for Diagrams - Part 12: Devices for Separating, Purification and Mixing First Edition Graphical symbols for diagrams Part 13: Devices for material processing First Edition Graphical symbols for diagrams Part 14: Devices for transport and handling of material First Edition Graphical Symbgols for Diagrams - Part 15: Installation Diagrams and Network Maps First Edition Space systems Space experiments General requirements First Edition Space Systems - Safety Requirements - Part 1: System Safety First Edition Space Systems - Safety Requirements - Part 2: Launch Site Operations First Edition Space systems Safety requirements Part 3: Flight safety systems First edition Space systems Electrical, electronic and electromechanical (EEE) parts Part 1: Parts management First Edition

ISO ISO ISO

14621-2 14622 14623

Space systems Electrical, electronic and electromechanical (EEE) parts Part 2: Control programme requirements First Edition Space Systems - Structural Design - Loads and Induced Environment First Edition Space systems Pressure vessels and pressurized structures Design and operation First Edition

ISO

14624-1

ISO

14624-2

ISO

14624-3

ISO

14624-4

ISO

14624-5

ISO

14624-6

ISO

14624-7

Space systems Safety and compatibility of materials Part 1: Determination of upward flammability of materials First Edition Space systems Safety and compatibility of materials Part 2: Determination of flammability of electrical-wire insulation and accessory materials First Edition Space systems Safety and compatibility of materials Part 3: Determination of offgassed products from materials and assembled articles First Edition Space systems Safety and compatibility of materials Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments First Edition Space systems Safety and compatibility of materials Part 5: Determination of reactivity of system/component materials with aerospace propellants First Edition Space systems Safety and compatibility of materials Part 6: Determination of reactivity of processing materials with aerospace fluids First Edition Space systems Safety and compatibility of materials Part 7: Determination of permeability and penetration of materials to aerospace fluids First Edition

ISO ISO ISO ISO

14625 14630 14631 14632

ISO

14635-1

Space Systems - Ground Support Equipment for Use at Launch, Landing, or Retrieval Sites - General Requirements First Edition Non-active surgical implants - General requirements Second Edition Extruded Sheets of Impact-Modified Polystyrene (PS-I) - Requirements and Test Methods First Edition Extruded Sheets of Polyethylene (PE-HD) - Requirements and Test Methods First Edition Gears - FZG Test Procedures - Part 1: FZG Test Method A/8, 3/90 for Relative Scuffing Load-Carrying Capacity of Oils First Edition

ISO

14635-2

ISO ISO

14635-3 14637

ISO

14644-1

ISO ISO ISO ISO

14644-2 14644-3 14644-4 14644-5

ISO

14644-6

ISO ISO ISO

14644-7 14644-8 14647

ISO

14648-1

ISO

14648-2

ISO

14649-1

ISO

14649-10

ISO

14649-11

ISO

14649-12

ISO

14649-121

Gears FZG test procedures Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils First Edition Gears FZG test procedures Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases First Edition Milk Determination of urea content Enzymatic method using difference in pH (Reference method) First Edition Cleanrooms and Associated Controlled Environments - Part 1: Classification of Air Cleanliness First Edition [Superseded: IEST FEDSTD-209E CANC NOTICE 1] Cleanrooms and Associated Controlled Environments - Part 2: Specifications for Testing and Monitoring to Prove Continued Compliance with ISO 14644-1 First Edition [Superseded: IEST FED-STD-209E CANC NOTICE 1] Cleanrooms and associated controlled environments Part 3: Test methods First Edition Cleanrooms and Associated Controlled Environments - Part 4: Design, Construction and Start-Up First Edition Cleanrooms and associated controlled environments Part 5: Operations First Edition Cleanrooms and associated controlled environments ù Part 6: Vocabulary Salles propres et environnements ma¯ trisÚs apparentÚs ù Partie 6: Vocabulaire First Edition Cleanrooms and associated controlled environments Part 7: Separative devices (clean air hoods, gloveboxes, isolators and minienvironments) First Edition Cleanrooms and associated controlled environments Part 8: Classification of airborne molecular contamination First Edition Matallic Coatings - Determination of Porosity in Gold Coatings on Metal Substrates - Nitric Acid Vapour Test First Edition Micrographics - Quality Control of COM Recorders That Generate Images Using a Single Internal Display System - Part 1: Characteristics of the Software Test Target First Edition Micrographics - Quality Control of COM Recorders That Generate Images Using a Single Internal Display System - Part 2: Method of Use First Edition Industrial Automation Systems and Integration - Physical Device Control - Data Model for Computerized Numerical Controllers - Part 1: Overview and Fundamental Principles First Edition Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 10: General process data Second Edition Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 11: Process data for milling Second Edition Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 12: Process data for turning First Edition Industrial automation systems and integration Physical device contro Data model for computerized numerical controllers Part 121: Tools for turning machines First Edition

ISO

14651

Information technology - International string ordering and comparison - Method for comparing character strings and description of the common template tailorable ordering First Edition; Amendment 1: 8/1/2003; Amendment 2: 10/15/2005; Amendment 3: 10/15/2006

ISO

FDIS 14651

ISO ISO ISO ISO ISO

14651 FDAM 3 14654 14655 14656 14657

ISO

14660-1

ISO

14660-2

ISO ISO

14661 14662

ISO

14663-1

ISO ISO

14663-2 14669

ISO

14673-1

ISO

14673-2

ISO

14673-3

ISO

14674

ISO

14675

ISO ISO ISO ISO ISO

14676 14678 14679 14680-1 14680-2

Information technology ù International string ordering and comparison ù Method for comparing character strings and description of the common template tailorable ordering Information technology International string ordering and comparison Method for comparing character strings and description of the common template tailorable ordering Amendment 3 Epoxy-Coated Steel for the Reinforcement of Concrete First Edition Epoxy-Coated Strand for the Prestressing of Concrete First Edition Epoxy Powder and Sealing Material for the Coating of Steel for the Reinforcement of Concrete First Edition Zinc-coated steel for the reinforcement of concrete First Edition Geometrical Product Specifications (GPS) - Geometrical Features - Part 1: General Terms and Definitions Specification Geometrique Des Produits (GPS) - Elements Geometriques - Partie 1: Termes Generaux Et Definitions First Edition Geometrical Product Specifications (GPS) - Geometrical Features - Part 2: Extracted Median Line of a Cylinder and a Cone, Extracted Median Surface, Local Size of an Extracted Feature First Edition Thermal Turbines for Industrial Applications (Steam Turbines, Gas Expansion Turbines ) - General Requirements First Edition; Amendment 1:11/01/2002 Information Technology - Open-Edi Reference Model Second Edition Plastics - Ethylene/Vinyl Alcohol (EVOH) Copolymer Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications First Edition Plastics - Ethylene/Vinyl Alcohol (EVOH) Copolymer Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties First Edition Water Quality - Determination of Acute Lethal Toxicity to Marine Copepods (Copepoda, Crustacea) First Edition Milk and milk products Determination of nitrate and nitrite contents Part 1: Method using cadmium reduction and spectrometry Second Edition; IDF 189-1 Milk and milk products Determination of nitrate and nitrite contents Part 2: Method using segmented flow analysis (Routine method) Second Edition; IDF 189-2 Milk and milk products Determination of nitrate and nitrite contents Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method) Second Edition; IDF 189-3 Milk and milk powder Determination of aflatoxin M1 content Clean-up by immunoaffinity chromatography and determination by thinlayer chromatography First edition Milk and Milk Products - Guidelines for a Standardized Description of Competitive Enzyme Immunoassays - Determination of Aflatozin M1 Contest First Edition Adhesives - Evaluation of the Effectiveness of Surface Treatment Techniques for Aluminium - Wet-Peel Test by Floating-Roller Method First Edition Adhesives Determination of resistance to flow (sagging) First Edition Adhesives - Measurement of Adhesion Characteristics by a Three-Point Bending Method First Edition Paints and Varnishes - Determination of Pigment Content - Part 1: Centrifuge Method First Edition Paints and Varnishes - Determination of Pigment Content - Part 2: Ashing Method First Edition

ISO ISO

14680-3 14681

Paints and Varnishes - Determination of Pigment Content - Part 3: Filtration Method First Edition Diesel Engines - Fuel Injection Pump Testing - Calibrating Fuel Injectors First Edition

ISO

14683

ISO ISO

14686 14687

ISO

14688-1

Geotechnical Investigation and Testing - Identification and Classification of Soil - Part 1: Identification and Description First Edition

ISO

14688-2

Geotechnical investigation and testing Identification and classification of soil Part 2: Principles for a classification First Edition

ISO

14689-1

ISO

14691

ISO

14692-1

ISO

14692-2 CORR 1

Geotechnical investigation and testing Identification and classification of rock Part 1: Identification and description First Edition Petroleum and Natural Gas Industries - Flexible Couplings for Mechanical Power Transmission - General Purpose Applications First Edition Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 1: Vocabulary, symbols, applications and materials First Edition Petroleum and natural gas industries ù Glass-reinforced plastics (GRP) piping ù Part 2: Qualification and manufacture TECHNICAL CORRIGENDUM 1 First Edition

ISO

14692-2

ISO ISO

14692-3 CORR 1 14692-3

ISO

14692-4 CORR 1

ISO ISO ISO ISO

14692-4 14693 14694 14695

ISO

14697

ISO

14698-1

Thermal Bridges in Building Construction - Linear Thermal Transmittance - Simplified Methods and Default Values First Edition Hydrometric determinations Pumping tests for water wells Considerations and guidelines for design, performance and use First Edition Hydrogen Fuel - Product Specification First Edition; Technical Corrigendum 1: 04-01-2001

Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 2: Qualification and manufacture First Edition Petroleum and natural gas industries ù Glass-reinforced plastics (GRP) piping ù Part 3: System design TECHNICAL CORRIGENDUM 1 First Edition Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 3: System design First Edition Petroleum and natural gas industries ù Glass-reinforced plastics (GRP) piping ù Part 4: Fabrication, installation and operation TECHNICAL CORRIGENDUM 1 First Edition Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 4: Fabrication, installation and operation First Edition Petroleum and natural gas industries Drilling and well-servicing equipment First Edition Industrial Fans - Specifications for Balance Quality and Vibration Levels First Edition Industrial fans Method of measurement of fan vibration First Edition Reaction-to-fire tests ù Guidance on the choice of substrates for building and transport products First Edition [Replaced: ISO TR 14697] Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods First Edition

ISO

14698-2 CORR 1

ISO ISO ISO

14698-2 14699 14700

ISO

14703

ISO

14704

ISO

14705

ISO ISO

14706 14707

ISO ISO

14708-1 14708-2

ISO

14709-1

ISO

14709-1 FDAM 1

ISO

14709-2

ISO ISO

14709-2 FDAM 14710

ISO ISO ISO ISO ISO ISO

14711 14713 14714 14715 14716 14717

ISO

14718

Cleanrooms and associated controlled environments ù Biocontamination control ù Part 2: Evaluation and interpretation of biocontamination data TECHNICAL CORRIGENDUM 1 First Edition Cleanrooms and associated controlled environments ù Biocontamination control ù Part 2: Evaluation and interpretation of biocontamination data First Edition Information Technology - Open Systems Interconnection - Transport Fast Byte Protocol First Edition Information Technology - Open Systems Interconnection - Network Fast Byte Protocol First Edition Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Sample Preparation for the Determination of Particle Size Distribution of Ceramic Powders First Edition Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Flexural Strength of Monolithic Ceramics at Room Temperature First Edition; Corrigendum 1:01/15/2004 Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Hardness of Monolithic Ceramics at Room Temperature First Edition Surface Chemical Analysis - Determination of Surface Elemental Comtamination on Silicon Wafers by Total-Reflection X-Ray Fluorescence (TXRF) Spectroscopy First Edition Surface Chemical Analysis - Glow Discharge Optical Emission Spectrometry (GD-OES) - Introduction to Use First Edition Implants for Surgery - Active Implantable Medical Devices - Part 1: General Requirements for Safety, Marking and for Information to be Provided by the Manufacturer First Edition Implants for surgery Active implantable medical devices Part 2: Cardiac pacemakers First Edition; Replaces ISO 5841-1 Information Technology - Configuration of Customer Premises Cabling (CPC) for Applications - Part 1: Integrated Services Digital Network (ISDN) Basic Access First Edition; Amendment 1: 08/2004 Information Technology - Configuration of Customer Premises Cabling (CPC) for Applications - Part 1: Integrated Services Digital Network (ISDN) Basic Access AMENDMENT 1 Information Technology - Configuration of Customer Premises Cabling (CPC) for Applications - Part 2: Integrated Services Digital Network (ISDN) Primary Rate First Edition Information Technology - Configuration of customer premises cabling (CPC) for applications - Part 2: ISDN primary access AMENDMENT 1 Equipment for Crop Protection - Air-Assisted Sprayers - Dimensions of Nozzle Swivel Nuts First Edition Space Systems - Unmanned Mission Operations Concepts - Guidelines for Defining and Assessing Concept Products First Edition Protection Against Corrosion of Iron and Steel in Structures - Zinc and Aluminium Coatings - Guidelines First Edition Essential Oils and Aromatic Extracts - Determination of Residual Benzene Content First Edition Oil of Thyme Containing Thymol, Spanish Type [Thymus Zygis (Loefl.) L.] First Edition Oil of Galbanum (Ferula Galbaniflua Boiss. Et Buhse) First Edition Oil of Origanum, Spanish Type [Thymbra Capitata (L.) Cav.] First Edition Animal Feeding Stuffs - Determination of Aflatoxin B1 Content of Mixed feeding Stuffs - Method Using High-Performance Liquid Chromatography First Edition

ISO ISO ISO

14721 14722 14723

Space Data and Information Transfer Systems - Open Archival Information System - Reference Model First Edition Moped and Moped-Rider Kinematics - Vocabulary First Edition Petroleum and Natural Gas Industries - Pipeline Transportation Systems - Subsea Pipeline Valves First Edition

ISO

14726-1

ISO ISO ISO

14726-2 14728-1 14728-2

ISO

14729

ISO ISO

14730 14731

ISO ISO ISO ISO

14732 14737 14738 CORR 2 14738

ISO ISO

14740 14743

ISO

14744-1

ISO

14744-2

ISO

14744-3

Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 1: Principles and Acceptance Conditions First Edition Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 2: Measurement of Accelerating Voltage Characteristics First Edition Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 3: Measurement of Beam Current Characteristics First Edition

ISO

14744-4

Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 4: Measurement of Welding Speed First Edition

ISO

14744-5

Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 5: Measurement of Run-Out Accuracy First Edition

ISO ISO ISO

14744-6 14750 14752

Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 6: Measurement of Stability of Spot Position First Edition Information Technology - Open Distributed Processing - Interface Definition Language First Edition Information Technology - Open Distributed Processing - Protocol Support for Computational Interactions First Edition

Ships and Marine Technology - Identification Colours for the Content of Piping Systems - Part 1: Main Colours and Media First Edition Ships and Marine Technology - Identification Colours for the Content of Piping Sytems - Part 2: Additional Colours for Different Media and/or Functions First Edition; Cancels and Replaces ISO 5571: 1981 Rolling bearings Linear motion rolling bearings Part 1: Dynamic load ratings and rating life First Edition Rolling bearings Linear motion rolling bearings Part 2: Static load ratings First Edition Ophthalmic Optics - Contact Lens Care Products - Microbiological Requirements and Test Methods for Products and Regimens for Hygienic Management of Contact Lenses First Edition Ophthalmic Optics - Contact Lens Care Products - Antimicrobial Preservative Efficacy Testing and Guidance on Determining Discard Date First Edition Welding Coordination - Tasks and Responsibilities Second Edition Welding Personnel - Approval Testing of Welding Operators for Fusion Welding and of Resistance Weld Setters for Fully Mechanized and Automatic Welding of Metallic Materials First Edition Cast Non-Alloy and Low Alloy Steels fo General Applications Fist Edition Safety of machinery ù Anthropometric requirements for the design of workstations at machinery First Edition Safety of machinery ù Anthropometric requirements for the design of workstations at machinery First Edition Forest Machinery - Backpack Power Units for Brush-Cutters, Grass-Trimmers, Pole-Cutters and Similar Appliances - Safety Requirements and Testing First Edition Pneumatic fluid power Push-in connectors for thermoplastic tubes First Edition

ISO ISO

14753 14754

ISO ISO

14755 14756

ISO

14760

ISO

14763-1

ISO ISO ISO

14763-3 14764 14765

ISO ISO ISO

14766 14769 14771

ISO ISO ISO ISO ISO

14772-1 14776-112 14776-113 14776-115 14776-150

ISO ISO ISO ISO ISO

14776-222 14776-232 14776-321 14776-326 14776-331

Information Technology - Open Distributed Processing - Interface References and Binding First Edition; ITUT-T Rec.X.930 (1998 E) Information Technology - Pen-Based Interfaces - Common Gestures for Text Editing with Pen-Based Systems First Edition Information Technology - Input Methods to Enter Characters from the Repertoire of ISO/IEC 10646 with a Keyboard or Other Input Device First Edition Information Technology - Measurement and Rating of Performance of Computer-Based Software Systems First Edition Information Technology - Data Interchange on 90 mm Overwritable and Read Only Optical Disk Cartridges Using Phase Change Capacity: 1,3 Gbytes per Cartridge First Edition Information Technology - Implementation and Operation of Customer Premises Cabling - Part 1: Administration First Edition; Amendment 1: 05-2004 Information technology û Implementation and operation of customer premises cabling û Part 3: Testing of optical fibre cabling First Edition;: 2000 [Replaced: ISO TR 14763-3] Software Engineering Software Life Cycle Processes Maintenance Second Edition; IEEE Std 14764: 2006 Information Technology - Framework for Protocol Identification and Encapsulation First Edition Information Technology - Telecommunications and Information Exchange between Systems - Use of OSI Applications Over the Internet Transmission Control Protocol (TCP) First Edition Information technology - Open Distributed Processing - Type Repository Function First Edition Information Technology - Open Distributed Processing - Naming Framework First Edition Information Technology - Computer Graphics and Image Processing - The Virtual Reality Modeling Language - Part 1: Functional Specification and UTF-8 Encoding First Edition Information technology Small computer system interface (SCSI) Part 112: Parallel Interface-2 (SPI-2) First Edition Information technology . Small computer system interface (SCSI) Part 113: Parallel Interface-3 (SPI-3) First edition Information technology Small computer system interface (SCSI) Part 115: Parallel Interface-5 (SPI-5) First Edition Information technology Small computer system interface (SCSI) Part 150: Serial Attached SCSI (SAS) First Edition Information technology Small computer system interface (SCSI) Part 222: Fibre Channel Protocol for SCSI, Second Version (FCP2) Information Technology - Small Computer System Interface (SCSI) - Part 232: Serial Bus Protocol 2 (SBP-2) First Edition Information Technology - Small Computer System Interface-3 (SCSI-3) - Part 321: Block Commands (SBC) First Edition Information technology Small computer system interface (SCSI) Part 326: Reduced block commands (RBC) First edition Information Technology Small Computer System Interface (SCSI) Part 331: Stream Commands (SSC)

ISO ISO

14776-341 14776-342

Information Technology - Small Computer System Interface - 3 (SCSI-3) - Part 341: Controller Commmands (SCC) First Edition Information Technology - Small Computer System Interface - Part 342:Controller Commands - 2 (SCC- 2 ) First Edition

ISO

14776-351

Information technology û Small computer system interface-3 (SCSI-3) û Part 351: Medium changer commands (SMC) First Edition

ISO

14776-362

ISO ISO ISO ISO ISO ISO ISO ISO ISO

14776-381 14776-411 14776-412 14776-413 14776-452 14782 14788 14790 CORR 1 14790

ISO ISO ISO ISO

14791 14792 14793 14794

ISO ISO ISO ISO

14797 14801 14807 14808

ISO

14813-1

ISO

14814

ISO

14815

ISO ISO

14816 14817

ISO

14819-1

ISO

14819-2

Information technology û Small computer system interface (SCSI) û Part 362: Multimedia commands-2 (MMC-2) First Edition Information Technology - Small Computer System Interface (SCSI) - PART 381: Optical Memory Card Device Commands (OMC) First Edition Information Technology SCSI-3 Architecture Model (SCSI-3 SAM) First Edition Information technology û Small computer system interface (SCSI) û Part 412: Architecture model-2 (SAM-2) First Edition Information technology û Small computer system interface (SCSI) û Part 413: Architecture model-3 (SAM-3) First Edition Information technology Small computer system interface (SCSI) Part 452: Primary Commands-2 (SPC-2) First Edition Plastics - Determination of haze for transparent materials First edition; Technical Corrigendum 1: 04/15/2005 Continuous hot-dip zinc-5 % aluminium alloy coated steel sheets Second edition Snowboard plate-bindings without a release mechanism ù Requirements and test methods TECHNICAL CORRIGENDUM 1 Snowboard plate-bindings without a release mechanism Requirements and test methods Second Edition Road Vehicles - Heavy Commercial Vehicle Combinations and Articulated Buses - Lateral Stability Test Methods First Edition Road vehicles Heavy commercial vehicles and buses Steady-state circular tests First Edition Road Vehicles - Heavy Commercial Vehicles and Buses - Lateral Transient Response Test Methods First Edition Heavy Commercial Vehicles and Buses - Braking in a Turn - Open-loop Test Methods First Edition Animal Feeding Stuffs - Determination of Furazolidone Content - Method Using High-Performance Liquid Chromatography First Edition Dentistry Fatigue test for endosseous dental implants First Edition Photography - Transmission and Reflection Densitometers - Method for Determining Performance First Edition Photography - Composition of 135-Film Canisters First Edition Intelligent transport systems ù Reference model architecture(s) for the ITS sector ù Part 1: ITS service domains, service groups and services First Edition [Replaced: ISO TR 14813-1] Road transport and traffic telematics Automatic vehicle and equipment identification Reference architecture and terminology First Edition Road transport and traffic telematics - Automatic vehicle and equipment identification - System specifications First Edition; Replaces ISO TS 14815:2000 Road transport and traffic telematics Automatic vehicle and equipment identification Numbering and data structure First Edition Transport information and control systems - Requirements for an ITS/TICS Data Dictionaries First Edition Traffic and Traveller Information (TTI) - TTI Messages via Traffic Message Coding - Part 1: Coding Protocol for Radio Data System Traffic Message Channel (RDS-TMS) Using ALERT-C First Edition Traffic and Traveller Information (TTI) - TTI Messages via Traffic Message Coding - Part 2: Event and Information Codes for Radio Data System - Traffic Message Channel (RDS-TMS) First Edition

ISO

14819-3

ISO ISO

14819-6 14825

ISO

14827-1

ISO

14827-2

ISO ISO ISO ISO

14828 14829 14833 14834

ISO

14835-1

ISO ISO

14835-2 14837-1

ISO

14839-1

ISO

14839-2

ISO

14839-3

ISO

14840

ISO

14841

ISO

14842

ISO

14843

Traffic and Travel Information (TTI) TTI messages via traffic message coding Part 3: Location referencing for ALERT-C First Edition; Supersedes ISO TS 14819-3:2000 Traffic and Traveller Information (TTI) TTI messages via traffic message coding Part 6: Encryption and conditional access for the Radio Data System Traffic Message Channel ALERT C coding First Edition Intelligent Transport Systems - Geographic Data Files (GDF) - Overall Data Specification First Edition Transport Information and control systems Data interfaces between centres for transport information and control systems Part 1: Message definition requirements First Edition Transport information and control systems Data interfaces between centres for transport information and control systems Part 2: DATEX-ASN First Edition Glass-reinforced thermosetting plastics (GRP) pipes Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor First Edition Frieght Containers - Straddle Carriers for Freight Container Handling - Calculation of Stability First Edition Information Technology - Data Interchange on 12,7 mm 128-Track Magnetic Tape Cartridges - DLT 3 Format First Edition Information Technology - Distributed Transaction Processing - the XA Specification First Edition Mechanical vibration and shock - Cold provocation tests for the assessment of peripheral vascular function - Part 1: Measurement and evaluation of finger skin temperature First Edition Mechanical vibration and shock - Cold provocation tests for the assessment of peripheral vascular function - Part 2: Measurement and evaluation of finger systolic blood pressure First Edition Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 1: General guidance First Edition Mechanical Vibration - Vibration of Rotating Machinery Equipped with Active Magnectic Bearings - Part 1: Vocabulary Vibrations Mecaniques - Vibrations de Machines Rotatives Equipees de Paliers Magnetiques Actifs - Partie 1: Vocabulaire First Edition Mechanical vibration Vibration of rotating machinery equipped with active magnetic bearings Part 2: Evaluation of vibration First Edition Mechanical vibration Vibration of rotating machinery equipped with active magnetic bearings Part 3: Evaluation of stability margin First Edition Information Technology - 12,65 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - Data-D3-1 Format First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Offer Supplementary Service First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Do Not Disturb and Do Not Disturb Override Supplementary Services First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Offer Supplementary Service Second Edition

ISO

14844

ISO

14845

ISO ISO ISO

14846 14847 14848

ISO

14849

ISO

14850-1

ISO

14851

ISO

14852

ISO

14853

ISO

14855-2

ISO ISO ISO ISO

14855-1 14856 14863 14864

ISO

14865

ISO

14869-1

Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Do Not Disturb and Do Not Disturb Override Supplementary Services Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Intrusion Supplementary Service First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Intrusion Supplementary Service Second Edition Rotary Positive Displacement Pumps - Technical Requirements First Edition Plastics - Unsaturated-Polyester Resins - Determination of Reactivity at 130 Degrees Celsius First Edition Plastics Phenol-Formaldehyde Mouldimgs - Determination of Free Ammonia and Ammonium Compounds - Indophenol Method First Edition Nuclear energy Waste-packages activity measurement Part 1: High-resolution gamma spectrometry in integral mode with open geometry First Edition Determination of the ultimate aerobic biodegradibility of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer First edition; Technical Corrigendum 1: 05/2005 Determination of the ultimate aerobic biodegradibility of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide First edition; Technical Corrigendum 1: 05/2005 Plastics Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system Method by measurement of biogas production First Edition Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions ù Method by analysis of evolved carbon dioxide ù Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test First Edition Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method First Edition; Replaces ISO 14855:1999 Timekeeping Instruments - Wristwatch-Cases - Fixing Dimensions of Non-Spring-Bar Types First Edition Information Technology - System-Independent Data Format (SIDF) First Edition Rice - Evaluation of Gelatinization Time of Kernels During Cooking First Edition Machinery for Forestry - Portable Hand-Held Brush-Cutters and Grass-Trimmers with Backpack-Mounted Combustion-Engine Power Source - Safety Requirements and Testing First Edition Soil Quality - Dissolution for the Determination of Total Element Content - Part 1: Dissolution with Hydrofluoric and Perchloric Acids First Edition

ISO ISO ISO

14869-2 14870 14877

Soil Quality - Dissolution for the Determination of Total Element Content - Part 2: Dissolution by Alkaline Fusion First Edition Soil Quality - Extraction of Trace Elements by Buffered DTPA Solution First Edition Protective Clothing for Abrasive Blasting Operations Using Granular Abrasives First Edition

ISO

14879-1

ISO ISO

14880-1 14880-2

ISO ISO ISO ISO ISO

14880-3 14880-4 14881 14882 14887

ISO

14888-1

ISO

14888-2

ISO

14888-3 CORR 1

ISO ISO

14888-3 14889

ISO ISO

14890 CORR 1 14890

ISO

14891

ISO ISO

14892 14895

ISO ISO ISO ISO ISO

14896 AMD 1 14896 14897 14898 14899

ISO

14900

Implants for Surgery - Total Knee-Joint Prostheses Part 1: Determination of Endurance Properties of Knee Tibial Trays First Edition Optics and photonics - Microlens arrays - Part 1: Vocabulary Optique et photonique RÚseaux de microlentilles Partie 1: Vocabulaire First Edition; Corrigendum 1, 8/1/2003; Corrigendum 2, 8/1/2005 Optics and photonics Microlens arrays Part 2: Test methods for wavefront aberrations First Edition Optics and photonics Microlens arrays Part 3: Test methods for optical properties other than wavefront aberrations First Edition Optics and photonics Microlens arrays Part 4: Test methods for geometrical properties First Edition Integrated Optics - Interfaces - Parameters Relevent to Coupling Properties First Edition Programming Languages - C++ Second Edition Sample Preparation - Dispersing Procedures for Powders in Liquids First Edition Information Technology - Security Techniques - Digital Signatures with Appendix - Part 1: General First Edition; Corrected and Reprinted 12/15/1999 Information Technology - Security Techniques - Digital Signatures with Appendix - Part 2: Identity-Based Mechanisms First Edition Information technology ù Security techniques ù Digital signatures with appendix ù Part 3: Discrete logarithm based mechanisms TECHNICAL CORRIGENDUM 1 Second Edition Information technology Security techniques Digital signatures with appendix Part 3: Discrete logarithm based mechanisms Second Edition Ophthalmic Optics - Spectacle Lenses - Fundamental Requirements for Uncut Finished Lenses Second Edition Information technology ù Multimedia content description interface ù Part 5: Multimedia description schemes TECHNICAL CORRIGENDUM 1 First Edition Conveyor belts Specification for rubber or plastics covered conveyor belts of textile construction for general use First Edition Milk and Milk Products - Determination of Nitrogen Content - Routine Method Using Combustion According to the Dumas Principle First Edition; IDF 185 Dried Skimmed Milk - Determination of Vitamin D Content Using Hih-Performance Liquid Chromatography First Edition; IDF 177 Small Craft - Liquid-Fuelled Galley Stoves First Edition Plastics - Polyurethane raw materials - Determination of isocyanate content AMENDMENT 1: Acceptable variations in the procedure for method B Second Edition Plastics Polyurethane raw materials Determination of isocyanate content Second Edition Plastics - Polyols for Use in the Production of Polyurethane - Determination of Water Content Second Edition Plastics - Aromatic Isocyanates for Use in the Production of Polyurethane - Determination of Acidity First Edition Plastics - Polyols for Use in the Production of Polyurethane - Determination of Basicity First Edition Plastics - Polyols for use in the production of polyurethane - Determination of hydroxyl number First Edition; Corrigendum 1:9/15/2005

ISO

14902

Animal Feeding Stuffs - Determination of Trypsin Inhibitor Activity of Soya Products First Edition Road transport and traffic telematics Electronic fee collection Application interface definition for dedicated short-range communication First Edition; Replaces ISO TR 14906: 12/15/1998 Plastics - Thermoplastic Polyester/Ester and Polyether/Ester Elastomers for Moulding and Extrusion - Part 1: Designation System and Basis for Specifications First Edition Plastics - Thermoplastic Polyester/Ester and Polyether/Ester Elastomers for Moulding and Extrusion - Part 2: Preparation of Test Specimens and Determination of Properties First Edition Water Quality - Determination of Dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ Using Ion Chromatography Method for Water and Waste Water First Edition Gas analysis ù Conversion of gas mixture composition data TECHNICAL CORRIGENDUM 1 First Edition Gas Analysis - Conversion of Gas Mixture Composition Data First Edition Software ergonomics for multimedia user interfaces Part 1: Design principles and framework First Edition Software ergonomics for multimedia user interfaces Part 2: Multimedia navigation and control First Edition Software Ergonomics for Multimedia User Interfaces - Part 3: Media Selection and Combination First Edition Thermal Spraying - Determination of Tensile Adhesive Strength First Edition Thermal Spraying - Terminology, Classification First Edition Thermal Spraying - Approval Testing of Thermal Sprayers First Edition

ISO

14906

ISO

14910-1

ISO

14910-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO

14911 14912 CORR 1 14912 14915-1 14915-2 14915-3 14916 14917 14918

ISO ISO ISO

14919 14920 14921

Thermal Spraying - Wire, Rods and Cords for Flame and Arc Spraying - Classification - Technical Supply Conditions First Edition Thermal Spraying - Spraying and Fusing of Self-Fluxing Alloys First Edition Thermal Spraying - Procedures for the Application of Thermally Sprayed Coatings for Engineering Components First Edition

ISO

14922-1

ISO

14922-2

Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 1: Guidance for Selection and Use First Edition Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 2: Comprehensive Quality Requirements First Edition

ISO

14922-3

Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 3: Standard Quality Requirements16 First Edition

ISO ISO ISO ISO ISO ISO ISO

14922-4 14923 14924 14931 14934-2 14934-3 14935

Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 4: Elementary Quality Requirements First Edition Thermal spraying Characterization and testing of thermally sprayed coatings First Edition Thermal spraying Post-treatment and finishing of thermally sprayed coatings First Edition Leather Guide to the selection of leather for apparel (excluding furs) First Edition Fire Tests Calibration and Use of Heat Flux Meters Part 2: Primary Calibration Methods First Edition Fire tests Calibration and use of heat flux meters Part 3: Secondary calibration method First Edition Petroleum and Related Products - Determination of Wick Flame Persistence of Fire-Resistant Fluids First Edition

ISO

14937

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

14939 14943 14945 14946 14949 14950 14951-1 14951-2 14951-3 14951-4 14951-5 14951-6 14951-7 14951-8 14951-9 14951-10 14951-11 14951-12 14951-13 14952-1 14952-2

ISO ISO ISO ISO

14952-3 14952-4 14952-5 14952-6

ISO ISO

14953 14954

ISO ISO

14956 14957

Sterilization of Health Care Products - General Requirements for Characterization of a Sterilizing Agent and the Development, Validation and Routine Control of a Sterilization Process for Medical Devices First Edition; Technical Corrigendum 1: 6/01/2003 Animal feeding stuffs Determination of carbadox content Method using highperformance liquid chromatography First Edition Nuclear fuel technology Administrative criteria related to nuclear criticality safety First Edition Small craft Builder┤s plate First Edition Small Craft - Maximum Load Capacity First Edition Implants for Surgery - Two-Part Addition-Cure Silicone Elastomers First Edition Space systems Unmanned spacecraft operability First Edition Space Systems - Fluid Characteristics - Part 1: Oxygen First Edition Space Systems - Fluid Characteristics - Part 2: Hydrogen Propellant First Edition Space Systems - Fluid Characteristics - Part 3: Nitrogen First Edition; Technical Corrigendum 1 09/01/2000 Space Systems - Fluid Characteristics - Part 4: Helium First Edition; Corrigendum 1: 06/01/2000 Space Systems - Fluid Characteristics - Part 5: Nitrogen Tetroxide Propellant First Edition Space Systems - Fluid Characteristics - Part 6: Monomethylhydrazine Propellant First Edition Space Systems - Fluid Characteristics - Part 7: Hydrazine Propellant First Edition Space Systems - Fluid Characteristics - Part 8: Kerosene Propellant First Edition Space Systems - Fluid Characteristics - Part 9: Argon First Edition; Corrigendum 1: 4/15/2000 Space Systems - Fluid Characteristics - Part 10: Water First Edition; Corrected and Reprinted 2000-06-01 Space Systems - Fluid Characteristics - Part 11: Ammonia First Edition Space Systems - Fluid Characteristics - Part 12: Carbon Dioxide First Edition Space Systems - Fluid Characteristics - Part 13: Breathing Air First Edition Space systems Surface cleanliness of fluid systems Part 1: Vocabulary First Edition Space systems Surface cleanliness of fluid systems Part 2: Cleanliness levels First Edition Space systems Surface cleanliness of fluid systems Part 3: Analytical procedures for the determination of nonvolatile residues and particulate contamination First Edition Space systems Surface cleanliness of fluid systems Part 4: Rough-cleaning processes First Edition Space systems Surface cleanliness of fluid systems Part 5: Drying processes First Edition Space systems Surface cleanliness of fluid systems Part 6: Precision-cleaning processes First Edition Space Systems - Structural Design - Determination of Loading Levels for Static Qualification Testing of Launch Vehicles First Edition Space systems Dynamic and static analysis Exchange of mathematical models First Edition Air Quality - Evaluation of the Suitability of a Measurement Pr4ocedure by Comparison with a Required Measurement Uncertainty First Edition Information Technology - Notation of Format for Data Element Values First Edition

ISO ISO ISO ISO

14960 14961 14962 14963

ISO

14964

ISO

14965

ISO

14966 CORR 1

ISO ISO ISO ISO ISO ISO ISO ISO

14966 14968 14971 14972 14975 14976 14977 14978

ISO ISO

14981 14982

ISO ISO

14993 14997

ISO ISO ISO ISO

14999-4 15001 15002 15003

ISO

15004-1

ISO

15004-2

ISO

15005

Tubeless tyres Valves and components Test methods First Edition Space Data and Information Transfer Systems - Parameter Value Language Specification Second Edition Space Data and Information Transfer Systems - ASCII Encoded English First Edition Mechanical vibration and shock Guidelines for dynamic tests and investigations on bridges and viaducts First Edition Mechanical Vibration and Shock - Vibration of Stationary Structures - Specific Requirements for Quality Management in Measurement and Evaluation of Vibration First Edition Air Quality - Determination of Total Non-Methane Organic Compounds - Cryogenic Preconcentration and Direct Flame Ionization Detection Method First Edition Ambient air ù Determination of numerical concentration of inorganic fibrous particles ù Scanning electron microscopy method ù TECHNICAL CORRIGENDUM 1 First Edition Ambient Air - Determination of Numerical Concentration of Inorganic Fibrous Particles - Scanning Electron Microscopy Method First Edition Paper and Board - Cut-Size Office Paper - Measurement of Curl in a Pack of Sheets First Edition Medical devices ù Application of risk management to medical devices Second edition Sterile Obturators for Single Use with Overneedle Peripheral Intravascular Catheters First Edition Surface Chemical Analysis - Information Formats First Edition Surface Chemical Analysis - Data Transfer Format First Edition; Corrected and Reprinted 03/15/1999 Information Technology - Syntactic Metalanguage - Extended BNF First Edition Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment First Edition Graphic Technology - Process Control - Optical, Geometrical and Metrological Requirements for Reflection Densitometers for Graphic Arts Use First Edition Agricultural and Forestry Machinery - Electromagnetic Compatibility - Test Methods and Acceptance Criteria First Edition Corrosion of Metals and Alloys - Accelerated Testing Involving Cyclic Exposure to Salt Mist,Dry" and"Wet" Conditions First Edition" Optics and optical instruments Test methods for surface imperfections of optical elements First Edition Optics and photonics ù Interferometric measurement of optical elements and optical systems ù Part 4: Interpretation and evaluation of tolerances specified in ISO 10110 First Edition Anaesthetic and respiratory equipment - Compatibility with oxygen First Edition Flow-Metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems First Edition Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions First Edition Ophthalmic instruments Fundamental requirements and test methods Part 1: General requirements applicable to all ophthalmic instruments First Edition; Together with ISO 15004-2 cancels and replaces ISO 15004:1997, Ophthalmic instruments ù Fundamental requirements and test methods ù Part 2: Light hazard protection First Edition [Superseded: ISO 15004] Road Vehicles - Ergonomic Aspects of Transport Information and Control Systems - Dialogue Management Principles and Compliance Procedures First Edition

ISO

15006

ISO

15007-1

ISO

15008

ISO ISO

15009 15010

ISO

15011-1

ISO

15011-2

ISO

15011-3

ISO

15011-4

ISO ISO

15012-1 15013

ISO ISO

15016 15018

ISO

15022-1

ISO ISO ISO

15022-2 15023-1 15023-2

ISO ISO ISO ISO ISO

15024 15025 15026 15027-1 15027-2

Road vehicles Ergonomic aspects of transport information and control systems Specifications and compliance procedures for invehicle auditory presentation First Edition Road Vehicles - Measurement of Driver Visual Behaviour with Respect to Transport Information and Control Systems - Part 1: Definitions and Parameters First Edition Road Vehicles - Ergonomic Aspects of Transport Information and Control Systems - Specifications and Compliance Procedures for InVehicle Visual Presentation First Edition Soil Quality - Gas Chromatographic Determination of the Content of Volatile Aromatic Hydrocarbons, Naphthalene and Volatile Halogenated Hydrocarbons - Purge-and Trap Method with Thermal Desorption First Edition Disposable Hanging Devices for Transfusion and Infusion Bottles - Requirements and Test Methods First Edition Health and Safety in Welding and Allied Processes - Laboratory Method for Sampling Fume and Gases Generated by Arc Welding Part 1: Determination of Emission Rate and Sampling for Analysis of Particulate Fume First Edition Health and safety in welding and allied processes Laboratory method for sampling fume and gases generated by arc welding Part 2: Determination of emission rates of gases, except ozone First Edition Health and safety in welding and allied processes Laboratory method for sampling fume and gases generated by arc welding Part 3: Determination of ozone concentration using fixed point measurements First Edition Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets First Edition Health and safety in welding and allied processes Requirements testing and marking of equipment for air filtration Part 1: Testing of the separation efficiency for welding fume First Edition Extruded Sheets of Polypropylene (PP) - Requirements and Test Methods First Edition Ships and Marine Technology - Guidelines for the Assessment of Speed and Power Performance by Analysis of Speed Trial Data First Edition Information technology Generic cabling for homes First Edition Securities - Scheme for Messages (Data Field Dictionary) - Part 1: Data Field and Message Design Rules and Guidelines First Edition; Technical Corrigendum 1: 12-15-1999; Cancels and Replaces ISO TR 7775: 1997 and ISO 11521: 1996 Securities - Scheme for Messages (Data Field Dictionary) - Part 2: Maintenance of the Data Field Dictionary and Catalogue of Messages First Edition; Technical Corrigendum 1: 12-15-1999; Cancels and Replaces ISO TR 7775: 1997 and ISO 11521: 1996 Plastics - Poly (vinyl alcohol) (PVAL) Materials - Part 1: Designation System and Basis for Specifications First Edition Plastics - Poly(Vinyl Alcohol) (PVAL) Materials - Part 2: Determination of Properties First Edition Fibre-Reinforced Plastic Composites - Determination of Mode I Interlaminar Fracture Toughness, GIC, for Unidirectionally Reinforced Materials First Edition Protective Clothing - Protection Against Heat and Flame - Method of Test for Limited Flame Spread First Edition Information Technology - System and Software Integrity Levels First Edition Immersion Suits - Part 1: Constant Wear Suits, Requirments Including Safety First Edition Immersion Suits - Part 2: Abandonment Suits, Requirements Including Safety First Edition

ISO

15027-3

ISO

15028

ISO

15029-1

ISO

15031-1

ISO

15031-3

ISO

15031-4

ISO

15031-5

ISO

15031-6

ISO ISO ISO ISO ISO ISO

15031-7 15032 15033 15034 15037-1 15037-2

ISO ISO ISO

15038 15039 15040

ISO ISO

15041 15045-1

ISO

15049

ISO

15050

ISO

15051

Immersion Suits - Part 3: Test Methods First Edition Plastics Aromatic isocyanates for use in the production of polyurethanes Determination of hydrolysable chlorine First Edition Petroleum and Related Products - Determination of Spray Ignition Characteristics of Fire-Resistant Fluids - Part 1: Spray Flame Persistence - Hollow-Cone Nozzle Method First Edition Road Vehicles - Communication between Vehicle and External Equipment for Emissions-Related Diagnostics - Part 1: General Information First Edition Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 3: Diagnostic connector and related electrical circuits, specification and use First Edition Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 4: External test equipment First Edition Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 5: Emissions-related diagnostic services First Edition Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions First Edition Road Vehicles - Communication between Vehicle and External Equipment for Emissions-Related Diagnostics - Part 7: Data Link Security First Edition Prostheses - Structural Testing of Hip Units First Edition Plastics ù Determination of caprolactam and its cyclic and linear oligomers by HPLC Second Edition Composites - Prepregs - Determination of Resin Flow First Edition Road vehicles Vehicle dynamics test methods Part 1: General conditions for passenger cars Second Edition Road vehicles Vehicle dynamics test methods Part 2: General conditions for heavy vehicles and buses First Edition Plastics - Organic-Perester Crosslinking Agents for Unsaturated-Polyester Thermosetting Materials - Determination of Active-Oxygen Content First Edition Textile-glass rovings Determination of solubility of size First Edition Composites - Prepregs - Determination of Gel Time First Edition Information Technology - Data Interchange on 90 mm Optical Disk Cartridges - Capacity: 640 Mbytes per Cartridge First Edition Information technology Home electronic system (HES) gateway Part 1: A residential gateway model for HES First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Advice of Charge Supplementary Services First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Advice of Charge Supplementary Services Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Recall Supplementary Service Second Edition

Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Recall Supplementary Service Second Edition

ISO

15052

ISO

15053

ISO

15054

ISO

15055

ISO ISO

15056 15061

ISO

15063

ISO ISO ISO

15064 15065 15071

ISO

15072

Plastics Polyols for use in the production of polyurethanes Determination of hydroxyl number by NIR spectroscopy First edition Plastics Aromatic isocyanates for use in the production of polyurethanes Determination of the isomer ratio in toluenediisocyanate First Edition Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 First Edition Hexagonal Bolts with Flange - Small Series - Product Grade A First Edition; Technical Corrigendum 1: 12/15/2006 Hexagon Bolts with Flange with Metric Fine Pitch Thread - Small Series - Product Grade A First Edition; Technical Corrigendum 1; 12/15/2006

ISO

15075

Transport information and control systems In-vehicle navigation systems Communications message set requirements First Edition

ISO ISO ISO ISO ISO ISO ISO ISO

15076-1 15078 15080 15081 15082 15083 15084 15085

ISO

15086-1

ISO ISO

15086-2 15087-1

Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Interception Additional Network Feature Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Interception Additional Network Feature Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Transit Counter Additional Network Feature First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Transit Counter Additional Network Feature First Edition Water Quality - Determination of Dissolved Bromate - Method by Liquid Chromatography of Ions First Edition

Image technology colour management - Architecture, profile format and data structure - Part 1: Based on ICC.1:2004-10 First Edition Machinery for Forestry - Log Loaders - Location and Method of Operation of Two-Lever Operator Controls First Edition Nuclear Facilities - Ventilation Penetrations for Shielded Enclosures First Edition Agricultural irrigation equipment Graphical symbols for pressurized irrigation systems First Edition Road Vehicles - Tests for Rigid Plastic Safety Glazing Materials First Edition Small Craft - Bilge-Pumping Systems First Edition Small Craft - Anchoring, Mooring and Towing - Strong Points First Edition Small craft Man-overboard prevention and recovery First Edition Hydraulic Fluid Power - Determination of Fluid-Borne Noise Characteristics of Components and Systems - Part 1: Introduction First Edition Hydraulic Fluid Power - Determination of Fluid-Borne Noise Characteristics of Components and Systems - Part 2: Measurement of Speed of Sound in a Fluid in a Pipe First Edition Dental Elevators - Part 1: General Requirements First Edition

ISO ISO ISO ISO ISO

15087-2 15087-3 15087-4 15087-5 15087-6

Dental Elevators - Part 2: Warwick James Elevators First Edition Dental Elevators - Part 3: Cryer Elevators First Edition Dental Elevators - Part 4: Coupland Elevators First Edition Dental Elevators - Part 5: Bein Elevators First Edition Dental Elevators - Part 6: Flohr Elevators First Edition

ISO ISO ISO ISO ISO ISO

15089 15098-1 15098-2 15098-3 15099 15100

ISO

15103-1

ISO ISO ISO

15103-2 15105-1 15105-2

ISO

15106-1

ISO

15106-2

ISO ISO ISO ISO ISO ISO ISO

15106-3 15107 15108 15109 15113 15117-1 15119

ISO

15136-1

Water Quality - Guidelines for Selctive Immunoassays for the Determination of Plant Treatment and Pesticide Agents First Edition Dental Tweezers - Part 1: General Requirements First Edition Dental Tweezers - Part 2: Meriam Types First Edition Dental Tweezers - Part 3: College Types First Edition Thermal Performance of Windows, Doors and Shading Devices - Detailed Calculations First Edition Plastics - Reinforcement Fibres - Chopped Strands - Determination of Bulk Density First Edition Plastics - Poloy(Phenylene Ether) (PPE) Mouldings and Extrusion Materials - Part 1: Designation System and Basis for Specifications First Edition Plastics ù Poly(phenylene ether) (PPE) moulding and extrusion materials ù Part 2: Preparation of test specimens and determination of properties Second Edition Plastics - Film and Sheeting - Determination of Gas-Transmission Rate - Part 1: Differential-Pressure Method First Edition Plastics Film and sheeting Determination of gas-transmission rate Part 2: Equal-pressure method First Edition Plastics - Film and Sheeting - Determination of Water Vapour Transmission Rate - Part 1: Humidity Detection Sensor Method First Edition Plastics - Film and Sheeting - Determination of Water Vapour Transmission Rate - Part 2: Infrared Detection Sensor Method First Edition Plastics - Film and Sheeting - Determination of Water Vapour Transmission Rate - Part 3: Electrolytic Detection Sensor Method First Edition Adhesives - Determination of Cleavage Strength of Bonded Joints First Edition Adhesives - Determination of Strength of Bonded Joints Using a Bending-Shear Method First Edition Adhesives - Determination of the Time to Rupture of Bonded Joints under Static Load First Edition Rubber - Determination of Frictional Properties Second Edition Coal flow properties Part 1: Bin flow First Edition Packaging - Sacks - Determination of the Friction of Filled Sacks First Edition Downhole Equipment for Petroleum and Natural Gas Industries - Progressing Cavity Pump Systems for Artificial Lift - Part 1: Pumps First Edition

ISO ISO

15136-2 15137

Petroleum and natural gas industries Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems First Edition Self-adhesive hanging devices for infusion bottles and injection vials Requirements and test methods First Edition

ISO ISO

15138 FDIS 15138

ISO

15141-1

ISO ISO ISO

15141-2 15142-1 15142-2

ISO ISO ISO

15142-3 15145 15147

ISO ISO ISO ISO

15148 15152 15153 15154

ISO

15156-1

ISO

15156-2 CORR 1

ISO

15156-2

ISO

15156-3 CORR 2

ISO

15156-3 CORR 1

ISO ISO ISO ISO

15156-3 15165 15166-1 15166-2

ISO

15167

Petroleum and Natural Gas Industries - Offshore Production Installations - Heating, Ventilation and Air-Conditioning First Edition; Technical Corrigendum 1:06-15-2001 Petroleum and natural gas industries ù Offshore production installations ù Heating, ventilation and air-conditioning Foodstuffs - Determination of Ochratoxin A in Cereals and Cereal Products - Part 1: High Performance Liquid Chromatographic Method with Silica Gel Clean Up First Edition Foodstuffs - Determination of Ochratoxin A in Cereals and Cereal Products - Part 2: High Performance Liquid Chromatographic Method with Bicarbonate Clean Up First Edition Implants for surgery Metal intramedullary nailing systems Part 1: Intramedullary nails First Edition Implants for surgery Metal intramedullary nailing systems Part 2: Locking components First Edition Implants for surgery Metal intramedullary nailing systems Part 3: Connection devices and reamer diameter measurements First Edition Information Technology - Programming Languages - Forth First Edition Light Conveyor Belts - Tolerances on Widths and Lengths of Cut Light Conveyor Belts First Edition Hygrothermal Perfor4mance of Building Materials and Products - Determination of Water Absorption Coefficient by Partial Immersion First Edition Tobacco - Determination of the Content of Total Alkaloids as Nicotine - Continuous-Flow Analysis Method First Edition Tobacco - Determination of the Content of Reducing Substances - Continuous-Flow Analysis Method First Edition Tobacco - Determination of the Content of Reducing Carbohydrates - Continuous-Flow Analysis Method First Edition Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials First Edition; Corrigendum 1: 09/01/2005 Petroleum and natural gas industries ù Materials for use in H2S-containing environments in oil and gas production ù Part 2: Crackingresistant carbon and low alloy steels, and the use of cast irons TECHNICAL CORRIGENDUM 1 First Edition Petroleum and natural gas industries ù Materials for use in H2S-containing environments in oil and gas production ù Part 2: Crackingresistant carbon and low alloy steels, and the use of cast irons First Edition Petroleum and natural gas industries ù Materials for use in H2S-containing environments in oil and gas production ù Part 3: Crackingresistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CORRIGENDUM 2 First Edition Petroleum and natural gas industries ù Materials for use in H2S-containing environments in oil and gas production ù Part 3: Crackingresistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CORRIGENDUM 1 First Edition Petroleum and natural gas industries ù Materials for use in H2S-containing environments in oil and gas production ù Part 3: Crackingresistant CRAs (corrosion-resistant alloys) and other alloys First Edition Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Classification System First Edition Adhesives - Methods of Preparing Bulk Specimens - Part 1: Two-Part Systems First Edition Adhesives - Methods of Preparing Bulk Specimens - Part 2: Elevated-Temperature-Curing One-Part Systems First Edition Petroleum Products - Determination of Particulate Content of Middle Distillate Fuels - Laboratory Filtration Method First Edition

ISO

15169

ISO ISO

15170-1 15170-2

ISO

15171-1

ISO ISO ISO ISO ISO ISO

15171-2 15172 15174 15175 15176 15178

ISO

15181-1

ISO

15181-2

ISO ISO

15181-3 15184

ISO

15186-1

ISO

15186-2

ISO ISO ISO ISO

15186-3 15188 15189 15190

ISO

15193

ISO ISO

15194 15195

Petroleum and liquid petroleum products Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems First Edition Road Vehicles - Four-Pole Electrical Connectors with Pins and Twist Lock - Part 1: Dimensions and Classes of Application First Edition Road Vehicles - Four-Pole Electrical Connectors with Pins and Twist Lock - Part 2: Tests and Requirements First Edition Connections for Fluid Power and General Use - Hydraulic Couplings for Diagnostic Purposes - Part 1: Coupling Not for Connection Under Pressure First Edition Connections for Fluid Power and General Use - Hydraulic Couplings for Diagnostic Purposes - Part 2: Coupling with M16 x 2 End for Connection under Pressure First Edition Road vehicles Wheels Nut seat strength tests First Edition Milk and Milk Products - Microbial Coagulants - Determination of Total Milk-Clotting Activity First Edition Soil quality Characterization of soil related to groundwater protection First Edition Soil Quality - Characterization of Excavated Soil and Other Soil Materials Intended for Re-use First Edition Soil Quality - Determination of Total Sulfur by Dry Combustion First Edition Paints and varnishes ù Determination of release rate of biocides from antifouling paints ù Part 1: General method for extraction of biocides Second Edition Paints and Varnishes - Determination of Release Rate of Biocides from Antifouling Paints - Part 2: Determination of Copper-Ion Concentration in the Extract and Calculation of the Release Rate Second Edition Paints and varnishes ù Determination of release rate of biocides from antifouling paints ù Part 3: Calculation of the zinc ethylenebis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract First Edition Paints and Varnishes - Determination of Film Hardness by Pencil Test First Edition Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements Using Sound Intensity - Part 1: Laboratory Measurements First Edition Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 2: Field measurements First Edition Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 3: Laboratory measurements at low frequencies First Edition Project Management Guidelines for Terminology Standardization First Edition Medical laboratories ù Particular requirements for quality and competence Second edition Medical laboratories Requirements for safety First Edition In Vitro Diagnostic Medical Devices - Measurement of Quantities in Samples of Biological Origin - Presentation of Reference Measurement Procedures First Edition In Vitro Diagnostic Medical Devices - Measurement of Quantities in Samples of Biological Origin - Description of Reference Materials First Edition Laboratory medicine Requirements for reference measurement laboratories First Edition

ISO

15197

ISO ISO ISO

15198 15200 15201

ISO

15202-1

ISO

15202-2

ISO ISO ISO ISO

15202-3 15205 15212-1 15212-2

ISO

15213

ISO

15214

ISO ISO ISO

15217 15218 15219

ISO

15223

ISO

15223-1

ISO ISO ISO ISO ISO

15225 15226 15227 15228 15230

ISO

15234

In Vitro Diagnostic Test Systems - Requirements for Blood-Glucose Monitoring Systems for Self-Testing in Managing Diabetes Mellitus First Edition Clinical laboratory medicine In vitro diagnostic medical devices Validation of user quality control procedures by the manufacturer First Edition Information Technology - Adaptive Lossless Data Compression Algorithm (ALDC) First Edition Zinc and zinc alloys Castings Specifications First Edition Workplace Air - Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry - Part 1: Sampling First Edition Workplace Air - Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry - Part 2: Sample Preparation First Edition Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 3: Analysis First Edition SBus - Chip and Module Interconnect Bus First Edition; IEEE Std 1496 Oscillation-Type Density Meters - Part 1: Laboratory Instruments First Edition Oscillation-Type Density Meters - Part 2: Process Instruments for Homogeneous Liquids First Edition Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions First Edition Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Mesophilic Lactic Acid Bacteria - ColonyCount Technique at 30 Degrees Celsius First Edition Fluid Power Systems and Components - 16 mm Square Electrical Connector with Earth Contact - Characteristics and Requirements First Edition Pneumatic Fluid Power - 3/2 Solenoid Valves - Mounting Interface Surfaces First Edition Earth-moving machinery Cable excavators Terminology and commercial specifications First Edition Medical devices Symbols to be used with medical device labels, labelling and information to be supplied First Edition: Amendment 1: 8/01/2002; Amendment 2: 02/15/2004; Partially superseded by ISO 15223-1 [Superseded By: ISO 15223-1] Medical devices ù Symbols to be used with medical device labels, labelling and information to be supplied ù Part 1: General requirements First edition [Superseded: ISO 15223, ISO 15223, ISO 15223, ISO TR 15223, ISO TR 15223] Nomenclature - Specification for a Nomenclature System for Medical Devices for the Purpose of Regulatory Data Exchange First Edition; Amendment 1: 02/01/2004 Technical Product Documentation - Life Cycle Model and Allocation of Documents First Edition Optics and Optical Instruments - Microscopes - Testing of Stereomicroscopes First Edition Textile machinery and accessories Profile reeds for air jet weaving machines Dimensions First Edition Mechanical vibration and shock - Coupling forces at the man-machine interface for hand-transmitted vibration First Edition Paints and Varnishes - Testing of Formaldehyde-Emitting Coatings and Melamine Foams - Determination of the Steady-State Concentration of Formaldehyde in a Small Test Chamber First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO

15236-1 15236-2 15236-3 15236-4 15237 15238 15239 15241 15242-1

Steel cord conveyor belts Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use First Edition Steel cord conveyor belts Part 2: Preferred belt types First Edition Steel cord conveyor belts ù Part 3: Special safety requirements for belts for use in underground installations First Edition Steel cord conveyor belts Part 4: Vulcanized belt joints First Edition Solid mineral fuels Determination of total mercury content of coal First Edition Solid mineral fuels Determination of total cadmium content of coal First Edition; Corrected Version: 6/15/2004 Solid mineral fuels Evaluation of the measurement performance of on-line analysers First edition Rolling bearings Symbols for quantities First Edition Rolling bearings Measuring methods for vibration Part 1: Fundamentals First Edition

ISO

15242-2

ISO ISO ISO ISO

15242-3 15243 15245-1 15245-2

ISO

15247

ISO

15248

ISO

15249

Rolling bearings Measuring methods for vibration Part 2: Radial ball bearings with cylindrical bore and outside surface First Edition Rolling bearings Measuring methods for vibration Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface First Edition Rolling bearings Damage and failures Terms, characteristics and causes First Edition Gas Cylinders - Parallel Threads for Connection of Valves to Gas Cylinders - Part 1: Specification First Edition Gas Cylinders - Parallel Threads for Connection of Valves to Gas Cylinders - Part 2: Gauge Inspection First Edition Zinc Sulfide Concentrates - Determination of Silver Content - Acid Dissolution and Flame Atomic Absorption Spectrometric Method First Edition Zinc Sulfide Concentrates - Determination of Silver and Gold Contents - Fire Assay and Flame Atomic Absorption Spectrometric Method Using Scorification or Cupellation First Edition Zinc Sulfide Concentrates - Determination of Gold Content - Acid Dissolution/Solvent Extraction/Flame Atomic Absorption Spectrometric Method First Edition

ISO

15252-1

ISO

15252-2

ISO ISO ISO ISO

15252-3 15253 15254 15261

ISO ISO ISO

15265 15267 15270

Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 1: Designation System and Basis for Specifications First Edition Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties First Edition Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 3: Requirements for Selected Moulding Compounds First Edition Ophthamic Optics and Instruments - Optical Devices for Enhancing Low Vision First Edition Ophthalmic Optics and Instruments - Electro-Optical Devices for Enhancing Low Vision First Edition Vibration and shock generating systems Vocabulary First Edition Ergonomics of the thermal environment Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions First Edition Animal and Vegetable Fats and Oils - Flashpoint Limit Test Using Pensky-Martens Closed Cup Flash Tester First Edition Plastics Guidelines for the recovery and recycling of plastics waste First Edition

ISO ISO

15286 15288

ISO ISO ISO

15289 15291 15292

ISO

15296

ISO ISO

15301 CORR 1 15301

ISO ISO

15302 15303

ISO

15304 CORR 1

ISO ISO

15304 15305

ISO ISO ISO ISO ISO

15306 15307 15310 15312 15314

ISO ISO ISO ISO ISO

15318 15320 15322 15323 15324

ISO ISO ISO ISO

15329 15330 15344 15348

Information Technology - 130 mm Optical Disk Cartridges for Information Interchange - Capacity: 5,2 Gbytes per Cartridge Systems Engineering - System Life Cycle Processes First Edition Systems and software engineering Content of systems and software life cycle process information products (Documentation) First Edition Information Technology - Programming Languages - Ada Semantic Interface Specification (ASIS) First Edition Information Technology - Security Techniques - Protection Profile Registration Procedures First Edition Gas welding equipment Vocabulary Terms used for gas welding equipment MatÚriel de soudage aux gaz Vocabulaire Termes utilisÚs pour le matÚriel de soudage aux gaz First Edition Animal and vegetable fats and oils ù Determination of sediment in crude fats and oils ù Centrifuge method TECHNICAL CORRIGENDUM 1 First Edition Animal and Vegetable Fats and Oils - Determination of Sediment in Crude Fats and Oils - Centrifuge Method First Edition Animal and Vegetable Fats and Oils - Determination of Benzo[a]pyrene Content - Reverse-Phase High-Performance Liquid Chromatography Method First Edition Animal and Vegetable Fats and Oils - Detection and Identification of a Volatile Organic Contaminant by GC/MS First Edition Animal and vegetable fats and oils Determination of the content of trans fatty acid isomers of vegetable fats and oils Gas chromatographic method First Edition Animal and vegetable fats and oils Determination of the content of trans fatty acid isomers of vegetable fats and oils Gas chromatographic method First Edition Animal and Vegetable Fats and Oils - Determination of Lovibond Colour First Edition Glass-reinforced thermosetting plastics (GRP) pipes Determination of the resistance to cyclic internal pressure First Edition Information Technology - Data Interchange on 12,7 mm 128-Track Magnetic Tape Cartridges - DLT 4 Format First Edition Fibre-Reinforced Plastic Composites - Determination of the In-Plane Shear Modulus by the Plate Twist Method First Edition Rolling bearings Thermal speed rating Calculation and coefficients First Edition Plastics Methods for marine exposure First Edition Pulp, Paper and Board - Determination of 7 Specified Polychlorinated Biphenyls (PCB) First Edition; Technical Corrigendum 1: 6/15/2001 Pulp, paper and board Determination of pentachlorophenol in an aqueous extract First Edition Dried milk and dried milk products Determination of their behaviour in hot coffee (Coffee test) First edition Dried Milk Protein Products - Determination of Nitrogen Solubility Index First Edition Corrosion of Metals and Alloys - Evaluation of Stress Corrosion Cracking by the Drop Evaporation Test First Edition Corrosion of metals and alloys Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys First Edition Fasteners - Preloading Test for the Detection of Hydrogen Embrittlement - Parallel Bearing Surface Method First Edition Snowboard step-in bindings Requirements and test methods First Edition Pipework - Metal Bellows Expansion Joints - General First Edition

ISO

15349-2

ISO

15350

ISO

15351

Unalloyed Steel - Determination of Low Carbon Content - Part 2: Infrared Absorption Method After Combustion in an Induction Furnace (with Preheating) First Edition Steel and Iron - Determination of Total Carbon and Sulfur Content - Infrared Absorption Method After Combustion in an Industion Furnace (Routine Method) First Edition Steel and Iron - Determination of Nitrogen Content - Thermal Conductimetric Method After Fusion in a Current of Inert Gas (Routine Method) First Edition

ISO ISO ISO ISO

15353 15355 15359 15360-1

Steel and Iron - Determination of Tin Content - Flame Atomic Absorption Spectrometric Method (Extraction as Sn-SCN) First Edition Steel and Iron - Determination of Chromium Content - Indirect Titration Method First Edition Paper and Board - Determination of the Static and Kinetic Coefficients of Friction - Horizontal Plane Method First Edition Recycled Pulps - Estimation of Stickies and Plastics - Part 1: Visual Method First Edition

ISO ISO ISO ISO ISO ISO

15360-2 CORR 1 15360-2 15361 15362 15363 15364

ISO

15366

ISO

15367-1

ISO

15367-2

ISO ISO

15368 15370

ISO ISO ISO ISO ISO

15371 15372 15373 15374 15375

ISO

15378

Recycled Pulps - Estimation of Stickies and Plastics - Part 2: Image Analysis Method TECHNICAL CORRIGENDUM 1 First Edition Recycled Pulps - Estimation of Stickies and Plastics - Part 2: Image Analysis Method First Edition Pulps - Determination of Zero-Span Tensile Strength, Wet or Dry First Edition Optics and Optical Instruments - Stereomicroscopes - Information Provided to the User First Edition Metallic Materials - Tube Ring Hydraulic Pressure Test First Edition Ships and Marine Technology-Pressure/Vacuum Valves for Cargo Tanks First Edition Nuclear Energy - Chemical Separation and Purification of Uranium and Plutonium in Nitric Acid Solutions for Isotopic and Dilution Analysis by Solvent Chromatography First Edition Lasers and laser-related equipment Test methods for determination of the shape of a laser beam wavefront Part 1: Terminology and fundamental aspects First Edition Lasers and laser-related equipment Test methods for determination of the shape of a laser beam wavefront Part 2: Shack-Hartmann sensors First Edition Optics and Optical Instruments - Measurement of Reflectance of Plane Surfaces and Transmittance of Plane Parallel Elements First Edition Ships and Marine Technology - Low-Location Lighting on Passenger Ships - Arrangement First Edition Ships and Marine Technology - Fire-Extinguishing Systems for Protection of Galley Deep-Fat Cooking Equipment - Fire Tests First Edition Ships and Marine Technology - Inflatable Rescue Boats - Coated Fabrics for Inflatable Chambers First Edition Plastics Polymer dispersions Determination of free formaldehyde First Edition Implants for Surgery - Requirements for Production of Forgings First Edition Hanging devices for multiple use with infusion bottles Requirements and test methods First Edition Primary packaging materials for medicinal products Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) First Edition

ISO

15379-1

ISO

15379-2

ISO

15380

ISO ISO

15382 15383

ISO ISO ISO ISO ISO ISO

15384 15387 15388 15389 15390 15394

Carbonaceous materials for the production of aluminium Cathode block materials Part 1: Determination of the expansion due to sodium penetration with application of pressure First Edition Carbonaceous materials for the production of aluminium Cathode block materials Part 2: Determination of the expansion due to sodium penetration without application of pressure First Edition Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HETG, HEPG, HEES and HEPR First Edition Nuclear Energy - Radioprotection - Procedure for Radiation Protection Monitoring in Nuclear Installations for External Exposure to Weakly Penetrating Radiation, Especially to Beta Radiation Protective Gloves for Firefighters - Laboratory Test Methods and Performance Requirements First Edition Protective Clothing for Firefighters - Laboratory Test Methods and Performance Requirements for Wildland Firefighting Clothing First Edition Space systems Single-junction solar cells Measurement and calibration procedures First edition Space systems Contamination and cleanliness control First Edition Space systems - Flight-to-ground umbilicals First Edition; Amendment 1: 10/01/2005; Technical Corrigendum 1: 2/15/2006 Space environment (natural and artificial) Galactic cosmic ray model First Edition Packaging - Bar Code and Two-Dimensional Symbols for Shipping, Transport and Receiving Labels First Edition

ISO

15395

Space Data and Information Transfer Systems - Standard Formatted Data Units - Control Authority Data Structures First Edition

ISO ISO ISO ISO

15396 15401 15402 15403-1

ISO

15404

ISO

15407-1

ISO

15407-2

ISO

15408-1

ISO

15408-2

ISO ISO

15408-3 15411

Space data and information transfer systems - Cross support reference model - Space link extension services Second edition Ships and Marine Technology - Bulk Carriers - Construction Quality of Hull Structure First Edition Ships and Marine Technology - Bulk Carriers - Repair Quality of Hull Structure First Edition Natural gas Natural gas for use as a compressed fuel for vehicles Part 1: Designation of the quality First Edition;:2000 Information Technology - Office Machines - Minimum Information to be Included in Specification Sheets - Facsimile Equipment First Edition Pneumatic Fluid Power - Five-Port Directional Control Valves, Sizes 18 mm and 26 mm - Part 1: Mounting Interface Surfaces without Electrical Connector First Edition Pneumatic fluid power Five-port directional control valves, sizes 18 mm and 26 mm Part 2: Mounting interface surfaces with optional electrical connector First Edition Information Technology - Security Techniques - Evaluation Criteria for IT Security - Part 1: Introduction and General Model Second Edition Information technology Security techniques Evaluation criteria for IT security Part 2: Security functional requirements Second Edition Information technology Security techniques Evaluation criteria for IT security Part 3: Security assurance requirements Second Edition Information Technology - Segmented Keyboard Layouts First Edition

ISO ISO

15412 15414

ISO

15415

ISO ISO

15416 15418

ISO

15419

ISO

15420

ISO

15421

ISO

15423

ISO

15424

ISO

15426-1

ISO

15426-2

ISO

15428

ISO

15429

ISO

15430

ISO

15431

ISO

15432

Information Technology - Portable Computer Keyboard Layouts First Edition; Corrected and Reprinted 09/15/2000 Information Technology - Open Distributed Processing - Reference Model - Enterprise Language Second Edition Information technology Automatic identification and data capture techniques Bar code print quality test specification Twodimensional symbols First Edition Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Print Quality Test Specification - Linear Symbols First Edition Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance First Edition Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Digital Imaging and Printing Performance Testing First Edition Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Symbology Specification - EAN/UPC First Edition Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Master Test Specifications First Edition Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Scanner and Decoder Performance Testing First Edition; Supersedes ISO/IEC 15423-1 Information Technology - Automatic Identification and Data Capture Techniques - Data Carrier Identifiers (Including Symbology Identifiers) First Edition Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 1: Linear symbols Second Edition Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 2: Two-dimensional symbols First Edition Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Wireless Terminal Location Registration Supplementary Service and Wireless Terminal Information Exchange Additional Network Feature First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Wireless Terminal Location Registration Supplementary Service and Wireless Terminal Information Exchange Additional Network Feature Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Wireless Terminal Call Handling Additional Network Features First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Wireless Terminal Call Handling Additional Network Features Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Wireless Terminal Authentication Supplementary Services (WTAT and WTAN) First Edition

ISO

15433

ISO ISO

15434 15437

ISO ISO

15438 15442

ISO

15444-1 CORR 1

ISO ISO ISO

15444-1 AMD 1 15444-1 15444-2 CORR 4

ISO ISO ISO ISO

15444-2 AMD 2 15444-2 CORR 3 15444-2 15444-3

ISO ISO

15444-3 FDAM 3 15444-4

ISO ISO

15444-5 AMD 1 15444-5

ISO ISO ISO

15444-6 AMD 1 15444-6 15444-8

ISO

15444-9 CORR 1

ISO ISO

15444-9 AMD 1 15444-9

ISO

15444-9 FDAM 3

Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Wireless Terminal Authentication Supplementary Services Second Edition Information technology Automatic identification and data capture techniques Syntax for high-capacity ADC media Third Edition Information Technology - Enhancements to LOTOS (E-LOTOS) First Edition Information Technology - Automatic Identification and Data Capture Techniques - PDF417 bar code symbology specification Second Edition Cranes Safety requirements for loader cranes First Editon Information technology ù JPEG 2000 image coding system: Core coding system TECHNICAL CORRIGENDUM 1 Second Edition Information technology ù JPEG 2000 image coding system: Core coding system AMENDMENT 1: Profiles for digital cinema applications Second Edition Information technology ù JPEG 2000 image coding system: Core coding system Second Edition Information technology ù JPEG 2000 image coding system: Extensions TECHNICAL CORRIGENDUM 4 First Edition Information technology ù JPEG 2000 image coding system: Extensions AMENDMENT 2: Extended capabilities marker segment First Edition Information technology ù JPEG 2000 image coding system: Extensions TECHNICAL CORRIGENDUM 3 First Edition Information technology ù JPEG 2000 image coding system: Extensions First Edition Information technology ù JPEG 2000 image coding system: Motion JPEG 2000 Second Edition Information technology JPEG 2000 image coding system Part 3: Motion JPEG 2000 AMENDMENT 3: Definition of compliance points and testing for Motion JPEG 2000 Information Technology - JPEG 2000 Image Coding System: Conformance Testing Second Edition Information technology ù JPEG 2000 image coding system: Reference software AMENDMENT 1: Reference software for the JP2 file format First Edition Information technology ù JPEG 2000 image coding system: Reference software First Edition Information technology ù JPEG 2000 image coding system ù Part 6: Compound image file format AMENDMENT 1: Hidden text metadata First Edition Information technology JPEG 2000 image coding system Part 6: Compound image file format First Edition Information technology ù JPEG 2000 image coding system ù Part 8: Secure JPEG 2000 First Edition Information technology ù JPEG 2000 image coding system: Interactivity tools, APIs and protocols TECHNICAL CORRIGENDUM 1 First Edition Information technology ù JPEG 2000 image coding system: Interactivity tools, APIs and protocols ù Part 9: AMENDMENT 1: APIs, metadata, and editing First Edition Information technology ù JPEG 2000 image coding system: Interactivity tools, APIs and protocols First Edition Information technology ù JPEG 2000 image coding system: Interactivity tools, APIs and protocols ù Part 9: AMENDMENT 3: JPIP extensions First Edition

ISO ISO ISO ISO ISO ISO

15444-11

Information technology ù JPEG 2000 image coding system: Wireless First Edition Information technology ù JPEG 2000 image coding system ù Part 12: ISO base media file format TECHNICAL CORRIGENDUM 3 15444-12 CORR 3 Second Edition Information technology ù JPEG 2000 image coding system ù Part 12: ISO base media file format AMENDMENT 1: Support for timed 15444-12 AMD 1 metadata, non-square pixels and improved sample groups Second Edition Information technology ù JPEG 2000 image coding system ù Part 12: ISO base media file format TECHNICAL CORRIGENDUM 2 15444-12 CORR 2 Second Edition Information technology ù JPEG 2000 image coding system ù Part 12: ISO base media file format TECHNICAL CORRIGENDUM 1 15444-12 CORR 1 Second Edition 15444-12 Information technology ù JPEG 2000 image coding system ù Part 12: ISO base media file format Second edition

ISO ISO ISO ISO

15445 15457-1 15457-2 15457-3

ISO ISO

15459-1 15459-2

ISO ISO ISO ISO ISO

15459-3 15459-4 15459-5 15459-6 15463

ISO ISO

15465 15469

ISO

15470

ISO ISO

15471 15472

ISO ISO

15473 15474-1

Information Technology - Document Description and Processing Languages - HyperText Markup Language (HTML) First Editon Identification Cards - Thin Flexible Cards - Part 1: Physical Characteristics First Edition Identification cards ù Thin flexible cards ù Part 2: Magnetic recording technique Second edition Identification Cards - Thin Flexible Cards - Part 3: Test Methods First Edition Information technology Unique identifiers Part 1: Unique identifiers for transport units Second Edition [Superseded By: SAI AS ISO/IEC 15459.1] Information technology Unique identifiers Part 2: Registration procedures Second Edition Information technology Unique identifiers Part 3: Common rules for unique identifiers First Edition [Superseded By: SAI AS ISO/IEC 15459.3] Information technology Unique identifiers Part 4: Unique identifiers for supply chain management First Edition Information technology ù Unique identifiers ù Part 5: Unique identifier for returnable transport items (RTIs) Information technology ù Unique identifiers ù Part 6: Unique identifier for product groupings First Edition Petroleum and natural gas industries Field inspection of new casing, tubing and plain-end drill pipe First Edition Pipework Stripwound metal hoses and hose assemblies First Edition; Replaces ISO 7657:1995; ISO 7658:1984; ISO 8444:1985; ISO 8445:1995; ISO 8446:1995; ISO 8447:1986; ISO 8448:1986; ISO 8449:1995; ISO 8450:1986 [Replaced: ISO 7657, ISO 7658, ISO 8444, ISO 8445, ISO 8446, ISO 8447, ISO 8448, ISO 8449, ISO 8450] Spatial Distribution of Daylight - CIE standard general sky Second Edition; CIE S 011/E:2003 Surface chemical analysis X-ray photoelectron spectroscopy Description of selected instrumental performance parameters First Edition Surface chemical analysis Auger electron spectroscopy Description of selected instrumental performance parameters First Edition Surface Chemical Analysis - X-Ray Photoelectron Spectrometers - Calibration of Energy Scales First Edition Soil Quality - Guidance on Laboratory Testing for Biodegradation of Organic Chemicals in Soil under Anaerobic Conditions First Ediiton Information Technology - CDIF Framework - Part 1: Overview First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

15474-2 15475-1 15475-2 15475-3 15476-1 15476-2 15476-3 15476-4 15476-6 15480 15481 15482 15483

ISO

15485

ISO

15486

ISO ISO ISO

15487 15488 15489-1

ISO

15490

ISO

15493 CORR 1

ISO

15493

ISO

15494

ISO ISO

15496 CORR 1 15496

ISO

15498

Information Technology - CDIF Framework - Part 2: Modelling and Extensibility First Edition Information technology CDIF transfer format Part 1: General rules for syntaxes and encodings First Edition Information technology CDIF transfer format Part 2: Syntax SYNTAX.1 First Edition Information technology CDIF transfer format Part 3: Encoding ENCODING.1 First Edition Information Technology - CDIF Semantic Metamodels - Part 1: Foundation First Edition Information Technology - CDIF Semantic Meatmodels - Part 2: Common First Edition Information technology CDIF semantic metamodel Part 3: Data definitions First Edition Information technology - CDIF semantic metamodel - Part 4: Data models First Edition Information technology - CDIF semantic metamodel - Part 6: State/event models First Edition Hexagon Washer Head Drilling Screws with Tapping Screw Thread First Edition Cross Recessed Pan Head Drilling Screws with Tapping Screw Thread First Edition Cross Recessed Countersunk Head Drilling Screws with Tapping Screw Thread First Edition Cross Recessed Raised Countersunk Head Drilling Screws with Tapping Screw Thread First Edition Information Technology - Data Interchange on 120 mm Optical Disk Cartridges Using Phase Change PD Format - Capacity: 650 Mbytes per Cartridge First Edition Information Technology - Data Interchange on 130 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity: 2,6 Gbytes per Cartridge First Edition Textiles - Method for Assessing Appearance of Apparel and Other Textile End Products After Domestic Washing and Drying First Edition Collets with 8░ setting angle for tool shanks Collets, nuts and fitting dimensions Second Edition Information and Documentation - Records Management - Part 1: General First Edition Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Tensile Strength of Monolithic Ceramics at Room Temperature First Edition Plastics piping systems for industrial applications ù Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) ù Specifications for components and the system ù Metric series TECHNICAL CORRIGENDUM 1 First Edition Plastics piping systems for industrial applications ù Acrylonitrile-butadienestyrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) ù Specifications for components and the system ? Metric series First Edition Plastics Piping Systems for Industrial Applications - Polybutene (PB), Polyethylene (PE) and Polypropylene (PP) - Specifications for Components and the System - Metric Series First Edition; Corrected version: 2/01/2004 Textiles ù Measurement of water vapour permeability of textiles for the purpose of quality control TECHNICAL CORRIGENDUM 1 First Edition Textiles ù Measurement of water vapour permeability of textiles for the purpose of quality control First Edition Information Technology - Data Interchange on 90 mm Optical Disk Cartridges - HS-1 Format - Capacity: 650 Mbytes per Cartridge First Edition

ISO

15500-1

ISO ISO ISO ISO ISO ISO ISO ISO

15500-2 15500-3 15500-4 15500-5 15500-6 15500-7 15500-8 15500-9

ISO

15500-10

ISO

15500-11

Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 1: General Requirements and Definitions First Edition; Amendment 1: 04/15/2003 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 2: Performance and General Test Methods First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 3: Check Valve First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 4: Manual Valve First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 5: Manual Cylinder Valve First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 6: Automatic Valve First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 7: Gas Injector First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 8: Pressure Indicator First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 9: Pressure Regulator First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 10: Gas-Flow Adjuster First Edition; Corrected Version 4/1/2003 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 11: Gas/Air Mixer First Edition; Corrected Version 4/1/2003

ISO

15500-12

Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 12: Pressure Relief Valve (PRV) First Edition

ISO ISO

15500-13 15500-14

ISO ISO ISO ISO ISO ISO ISO ISO

15500-15 15500-16 15500-17 15500-18 15500-19 15501-1 15501-2 15502 CORR

ISO

15502

ISO

15504-1

Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 13: Pressure Relief Device (PRD) First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 14: Excess Flow Valve First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 15: Gas-Tight Housing and Ventilation Hose First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 16: Rigid Fuel Line First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 17: Flexible Fuel Line First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 18: Filter First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 19: Fittings First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel Systems - Part 1: Safety Requiremnts First Edition Road Vehicles - Compressed Natural Gas (CNG) Fuel Systems - Part 2: Test Methods First Edition Household refrigerating appliances ù Characteristics and test methods TECHNICAL CORRIGENDUM 1 Household refrigerating appliances Characteristics and test methods First Edition; Supersedes ISO 5155:1995, ISO 7371:1995/A1:1997, ISO 8187:1991/A1:1997 and ISO 8561:1991/A1:1997 Information technology Process assessment Part 1: Concepts and vocabulary First Edition; Supersedes ISO/IEC TR 15504-1 and ISO/IEC TR 15504-9

ISO ISO

15504-2 CORR 1 15504-2

Software engineering ù Process assessment ù Part 2: Performing an assessment TECHNICAL CORRIGENDUM 1 First Edition Software engineering ù Process assessment ù Part 2: Performing an assessment First Edition

ISO

15504-3

ISO ISO

15504-4 15504-5

ISO

15505

ISO

15506

ISO ISO ISO ISO ISO ISO ISO

15507 15509 15511 15512 15513 15516 15517

ISO

15521

ISO

15522

ISO

15526-1

ISO

15526-2

ISO

15528

ISO

15529

ISO

15531-1

ISO

15531-31

ISO ISO

15531-32 15531-42

Information technology Process assessment Part 3: Guidance on performing an assessment First Edition Information technology Process assessment Part 4: Guidance on use for process improvement and process capability determination First Edition; Replaces ISO/IEC TR 15504-7:1998 and ISO/IEC TR 15504-8:1998 Information technology Process Assessment Part 5: An exemplar Process Assessment Model First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Message Waiting Indication Supplementary Service Third Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Message Waiting Indication Supplementary Service Third Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - PINX Clock Synchroization First Edition Adhesives - Determination of the Bond Strength of Engineering-Plastic Joints First Edition Information and documentation International Standard Identifier for Libraries and Related Organizations (ISIL) First Edition Plastics - Determination of Water Content First Edition; Replaces ISO 960: 1988 Cranes - Competency Requirements for Crane Drivers (Operators), Slingers, Signallers and Assessors First Edition Ships and marine technology Launching appliances for davit-launched lifeboats First Edition;:1985 [Replaced: ISO 6067] Tobacco Determination of nitrate content Continuous-flow analysis method First Edition Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Informatation Interchange - Helical Scan Recording - DDS-3 Format Using 125 m Length Tapes First Edition Water Quality - Determination of the Inhibitory Effect of Water Consitituents on the Growth of Activated Sludge Microorganisms First Edition Plastics - Polyketone (PK) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications First Edition Plastics - Polyketone (PK) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties First Edition Paints, Varnishes and Raw Materials for Paints and Varnishes - Sampling First Edition; Cancels and Replaces ISO 842: 1984 and ISO 1512: 1991 Optics and photonics ù Optical transfer function ù Principles of measurement of modulation transfer function (MTF) of sampled imaging systems Second Edition Industrial automation systems and integration Industrial manufacturing management data Part 1: General overview First Edition Industrial automation systems and integration Industrial manufacturing management data Part 31: Resource information model First Edition Industrial automation systems and integration Industrial manufacturing management data: Resources usage management Part 32: Conceptual model for resources usage management data First Edition Industrial automation systems and integration Industrial manufacturing management data Part 42: Time Model First Edition

ISO

15531-43

ISO

15534-1

ISO ISO ISO ISO

15534-2 15534-3 15535 15536-1

ISO

15536-2

ISO

15537

ISO

15538

ISO ISO

15540 15541

ISO ISO

15544 15546

ISO

15547-1

ISO ISO

15547-2 15550

ISO ISO ISO ISO ISO ISO ISO ISO ISO

15552 15553 15579 15583 15584 15585 15586 15587-1 15587-2

Industrial automation systems and integration Industrial manufacturing management data Part 43: Manufacturing flow management data: Data model for flow monitoring and manufacturing data exchange First Edition Ergonomic Design for the Safety of Machinery - Part 1: Principles for Determining the Dimensions Required for Openings for WholeBody Access into Machinery First Edition Ergonomic Design for the Safety of Machinery - Part 2: Principles for Determining the Dimensions Required for Access Openings First Edition Ergonomic Design for the Safety of Machinery - Part 3: Anthropometric Data First Edition General requirements for establishing anthropometric databases Second Edition Ergonomics Computer manikins and body templates Part 1: General requirements First edition Ergonomics ù Computer manikins and body templates ù Part 2: Verification of functions and validation of dimensions for computer manikin systems First edition Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs First Edition Protective Clothing for Firefighters - Laboratory Test Methods and Performance Requirements for Protective Clothing with a Reflective Outer Surface First Edition Ships and Marine Technology - Fire Resistance of Hose Assemblies - Test Methods First Edition; Technical Corrigendum 1: 12-011999 Ships and Marine Technology - Fire Resistance of Hose Assemblies - Requirements for the Test Bench First Edition Petroleum and Natural Gas Industries - Offshore Production Installations - Requirements and Guidelines for Emergency Response First Edition Petroleum and natural gas industries - Aluminium alloy drill pipe Second Edition Petroleum, petrochemical and natural gas industries Plate-type heat exchangers Part 1: Plate-and-frame heat exchangers First Edition Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers First Edition; Together with ISO 15547-1 replaces ISO 15547:2000 Internal Combustion Engines - Determination and Method for the Measurement of Engine Power - General Requirements Pneumatic fluid power Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm Basic, mounting and accessories dimensions First Edition Water quality Isolation and identification of Cryptosporidium oocysts and Giardia cysts from water First Edition Metallic Materials - Tensile Testing at Low Temperature First Edition Ships and marine technology Maritime standards list First edition Small Craft - Inboard Petrol Engines - Engine-Mounted Fuel and Electrical Components First Edition Hard coal Determination of caking index First Edition Water quality Determination of trace elements using atomic absorption spectrometry with graphite furnace First Edition Water Quality - Digestion for the Determination of Selected Elements in Water - Part 1: Aqua Regia Digestion First Edition Water Quality - Digestion for the Determination of Selected Elements in Water - Part 2: Nitric Acid Digestion First Edition

ISO

15589-1

ISO

15589-2

ISO

15590-1

ISO

15590-2

ISO

15590-3

ISO

15592-1

ISO

15592-2

ISO

15592-3

ISO ISO

15593 15595

ISO ISO ISO ISO ISO ISO

15597 15598 15600 15601 15605 15606

ISO ISO

15607 CORR 1 15607

ISO

15609-1 CORR 1

ISO

15609-1

ISO

15609-2

Petroleum and Natural Gas Industries - Cathodic Protection of Pipeline Transportation Systems - Part 1: On-Land Pipelines First Edition Petroleum and natural gas industries Cathodic protection of pipeline transportation systems Part 2: Offshore pipelines First Edition Petroleum and Natural Gas Industries - Induction Bends, Fittings and Flanges for Pipeline Transportation Systems - Part 1: Induction Bends First Edition Petroleum and natural gas industries - induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings First Edition Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges First Edition Fine-Cut Tobacco and Smoking Articles Made from It - Methods of Sampling, Conditioning and Analysis - Part 1: Sampling First Edition Fine-Cut Tobacco and Smoking Articles Made from It - Methods of Sampling, Conditioning and Analysis - Part 2: Atmosphere for Conditioning and Testing First Edition Fine-Cut Tobacco and Smoking Articles Made From It - Methods of Sampling, Conditioning and Analysis - Part 3: Determination of Total Particulate Matter of Smoking Articles Using a Routine Anaytical Smoking Machine, Preparation for the Determination of Water and Nicotine, and Calculation of Nicotine-Free Dry Particulate Matter First Edition Environmental Tobacco Smoke - Estimation of Its Contribution to Respirable Suspended Particles - Determination of Particulate Matter by Ultraviolet Absorbance and by Fluorescence First Edition Gas cylinders Specifications and testing of LPG cylinder valves Manually operated First Edition Petroleum and Related Products - Determination of Chlorine and Bromine Content - Wavelength-Dispersive X-Ray Fluorescence Spectrometry First Edition Tea - Determination of Crude Fibre Content First Edition Tools for Moulding - Thermal Insulating Sheets for Injection Moulds First Edition Hammers - Technical Specifications Concerning Steel Hammer Heads - Test Procedures First Edition Adhesives - Sampling First Edition Dental Handpieces - Air-Powered Scalers and Scaler Tips First Edition Specification and qualification of welding procedures for metallic materials ù General rules TECHNICAL CORRIGENDUM 1 First Edition Specification and qualification of welding procedures for metallic materials - General rules First Edition Specification and qualification of welding procedures for metallic materials ù Welding procedure specification ù Part 1: Arc welding TECHNICAL CORRIGENDUM 1 First Edition Specification and qualification of welding procedures for metallic materials ù Welding procedure specification ù Part 1: Arc welding First Edition [Replaced: ISO 9956-2] Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Specification - Part 2: Gas Welding First Edition

ISO

15609-3

ISO

15609-4

ISO

15609-5

ISO

15610

ISO

15611

ISO

15612

ISO

15613

ISO

15614-1 CORR 1

ISO

15614-1

ISO

15614-2 CORR 1

ISO

15614-2

ISO

15614-4 CORR 1

ISO

15614-4

ISO

15614-5

ISO

15614-6

ISO

15614-7

ISO

15614-8

ISO

15614-10

Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 3: Electron beam welding First Edition; Replaces ISO 9956-10:1996 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding First Edition; Replaces ISO 9956-11 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding First Edition Specification and qualification of welding procedures for metallic materials Qualification based on tested welding consumables First Edition; Replaces ISO 9956-5 Specification and qualification of welding procedures for metallic materials Qualification based on previous welding experience First Edition Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure First Edition; Replaces ISO 9956-7:1995 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test First Edition; Supersedes ISO 9956-8:1995 Specification and qualification of welding procedures for metallic materials ù Welding procedure test ù Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys TECHNICAL CORRIGENDUM 1 First Edition Specification and qualification of welding procedures for metallic materials ù Welding procedure test ù Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys First Edition Specification and qualification of welding procedures for metallic materials ù Welding procedure test ù Part 2: Arc welding of aluminium and its alloys TECHNICAL CORRIGENDUM 1 First edition Specification and qualification of welding procedures for metallic materials ù Welding procedure test ù Part 2: Arc welding of aluminium and its alloys First edition Specification and qualification of welding procedures for metallic materials ù Welding procedure test ù Part 4: Finishing welding of aluminium castings TECHNICAL CORRIGENDUM 1 First Edition Specification and qualification of welding procedures for metallic materials Welding procedure test Part 4: Finishing welding of aluminium castings First Edition Specification and qualification of welding procedures for metallic materials Welding procedure test Part 5: Arc welding of titanium, zirconium and their alloys First Edition Specification and qualification of welding procedures for metallic materials Welding procedure test Part 6: Arc and gas welding of copper and its alloys First Edition Specification and qualification of welding procedures for metallic materials ù Welding procedure test ù Part 7: Overlay welding First Edition Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 8: Welding of Tubes to Tube-Plate Joints First Edition Specification and qualification of welding procedures for metallic materials Welding procedure test Part 10: Hyperbaric dry welding First Edition

ISO

15614-11

ISO

15614-12

ISO

15614-13

ISO

15615

ISO

15616-1

ISO

15616-2

ISO ISO

15616-3 15618-1

ISO ISO ISO

15618-2 15620 15621

ISO

15622

ISO ISO ISO

15623 15628 15629

ISO

15630-1

ISO ISO

15630-2 15630-3

ISO

15632

ISO ISO ISO

15634 15635 15636

Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 11: Electron and Laser Beam Welding First Edition Specification and qualification of welding procedures for metallic materials Welding procedure test Part 12: Spot, seam and projection welding First Edition Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Resistance butt and flash welding First Edition Gas Welding Equipment - Acetylene Manifold Systems for Welding, Cutting and Allied Processes - Safety Requirements in HighPressure Devices First Edition Acceptance Tests for CO2-Laser Beam Machines for High Quality Welding and Cutting - Part 1: General Principles, Acceptance Conditions First Edition Acceptance Tests for CO2-Laser Beam Machines for High Quality Welding and Cutting - Part 2: Measurement of Static and Dynamic Accuracy First Edition Acceptance Tests for CO2-Laser Beam Machines for High Quality Welding and Cutting - Part 3: Calibration of Instruments for Measurement of Gas Flow and Pressure First Edition Qualification Testing of Welders for Underwater Welding - Part 1: Diver-Welders for Hyperbaric Wet Welding First Edition Qualification Testing of Welders for Underwater Welding - Part 2: Diver-Welders and Welding Operators for Hyperbaric Dry Welding First Edition Welding - Friction Welding of Metallic Materials First Edition Urine-Absorbing Aids - General Guidance on Evaluation First Edition Transport Information and Control Systems Adaptive Cruise Control Systems Performance Requirements and Test Procedures First Edition Transport Information and Control Systems - Forward Vehicle Collision Warning Systems - Performance Requirements and Test Procedures First Edition Road transport and traffic telematics ù Dedicated short range communication (DSRC) ù DSRC application layer First Edition Pallets for materials handling Quality of fasteners for assembly of new and repair of used, flat, wooden pallets First Edition Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 1: Reinforcing Bars, Wire Rod and Wire First Edition Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 2: Welded Fabric First Edition; This Standard Together with 15630-1 and 15630-3 Replaces ISO 10065, 10287 and 10606 Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 3: Prestressing Steel First Edition Microbeam Analysis - Instrumental Specification for Energy Dispersive X-ray Spectrometers with Semiconductor Detectors First Edition Iron ores Determination of chromium content Flame atomic absorption spectrometric method First edition; Together with ISO 15633 replaces ISO 9685:1991 Coated Abrasives - Flap Discs First Edition Back-up pads for vulcanized fibre discs First Edition

ISO ISO ISO

15637-1 15637-2 15641

Holding fixtures of cylindrical abrasive sleeves Part 1: Holding fixtures with shank for hand-held grinding machines First Edition Holding fixtures of cylindrical abrasive sleeves Part 2: Holding fixtures for stationary machines First Edition Milling Cutters for High Speed Machining - Safety Requirements First Edition

ISO

15642

ISO

15643

Road construction and maintenance equipment Asphalt mixing plants Terminology and commercial specifications First Edition Road Construction and Maintenance Equipment - Bituminous Binder Spreaders/Sprayers - Terminology and Commercial Specifications First Edition

ISO

15644

Road Construction and Maintenance Equipment Chippings Spreaders Terminology and Commercial Specifications First Edition

ISO

15645

Road Construction and Maintenance Equipment Road Milling Machinery Terminology and Commercial Specifications First Edition

ISO ISO ISO ISO ISO ISO ISO

15647 15648 15649 15652 15654 15662 15663-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

15663-2 15663-3 15664 15665 CORR 1 15665 15667 15668 15671 15672 15673

ISO ISO

15674 15675

ISO

15676

Nuclear energy Isotopic analysis of uranium hexafluoride Double-standard gas-source mass spectrometric method First Edition Butter Determination of salt content Potentiometric method First Edition; IDF 179 Petroleum and Natural Gas Industries - Piping First Edition Small craft Remote steering systems for inboard mini jet boats First Edition Fatigue test method for transmission precision roller chains First Edition Intelligent transport systems Wide area communication Protocol management information First Edition Petroleum and Natural Gas Industries - Life Cycle Costing - Part 1: Methodology First Edition Petroleum and Natural Gas Industries - Life-Cycle Costing - Part 2: Guidance on Application of Methodology and Calculation Methods First Edition Petroleum and Natural Gas Industries - Life-Cycle Costing - Part 3: Implementation Guidelines First Edition Acoustics - Noise Control Design Procedures for Open Plant First Edition Acoustics ù Acoustic insulation for pipes, valves and flanges TECHNICAL CORRIGENDUM 1 First Edition Acoustics ù Acoustic insulation for pipes, valves and flanges First edition Acoustics - Guidelines for Noise Control by Enclosures and Cabins First Edition Banking - Secure File Transfer (Retail) First Edition Rubber and Rubber Additives - Determination of Total Sulfur Content Using an Automatic Analyser First Edition Rubber and Rubber Additives - Determination of Total Nitrogen Content Using an Automatic Analyser First Edition Guidelines for the simplified design of structural reinforced concrete for buildings First Edition Cardiovascular Implants and Artificial Organs - Hard-Shell Cardiotomy/Venous Reservoir Systems (With/Without Filter) and Soft Venous Reservoir Bags First Edition Cardiovascular Implants and Artificial Organs - Cardiopulmonary Bypass Systems - Arterial Line Blood Filters First Edition Cardiovascular implants and artificial organs - Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO) First Edition

Water quality Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption First Edition Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 1: Method by flow injection analysis (FIA) First Edition Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 2: Method by continuous flow analysis (CFA) First Edition

ISO

15680

ISO

15681-1

ISO

15681-2

ISO

15682

ISO ISO ISO ISO

15685 15686-1 15686-2 15686-3

Soil quality Determination of potential nitrification and inhibition of nitrification Rapid test by ammonium oxidation First Edition Buildings and Constructed Assets - Service Life Planning - Part 1: General Principles First Edition Buildings and Constructed Assets - Service Life Planning - Part 2: Service Life Prediction Procedures First Edition Buildings and Constructed Assets - Service Life Planning - Part 3: Performance Audits and Reviews First Edition

ISO

15686-6

ISO ISO

15686-7 15688

Buildings and constructed assets Service life planning Part 6: Procedures for considering environmental impacts First Edition Buildings and constructed assets Service life planning Part 7: Performance evaluation for feedback of service life data from practice First Edition Road construction and maintenance equipment Soil stabilizers Terminology and commercial specifications First Edition

ISO ISO

15689 15693-1

Road construction and maintenance equipment Powder binder spreaders Terminology and commercial specifications First Edition Identification Cards - Contactless Integrated Circuit(s) Cards - Vicinity Cards - Part 1: Physical Characteristics First Edition

ISO

15693-2

ISO

15693-3

ISO ISO

15695 15700

Identification Cards - Contactless Integrated Circuit Cards - Vicinity Cards - Part 2: Air Interface and Initialization Second Edition Identification Cards - Contactless Integrated Circuit(s) Cards - Vicinity Cards - Part 3: Anticollision and Transmission Protocol First Edition Vitreous and Porcelain Enamels - Determination of Scratch Resistance of Enamel Finishes First Edition; Technical Corrigendum,11/01/2000 Leather - Tests for Colour Fastness - Colour Fastness to Water Spotting First Edition; IULTCS; IUF 420

ISO ISO ISO

15701 15702 15703

ISO

15704

Leather - Test for Colour Fastness - Colour Fastness to Migration into Plasticized Poly(Vinyl Chloride) First Edition; IULTCS; IUF 442 Leather - Tests for Colour Fastness - Colour Fastness to Machine Washing First Edition; IULTCS; IUF 435 Leather - Tests for Colour Fastness - Colour Fastness to Mild Washing First Edition; IULTCS; IUF 423 Industrial automation systems - Requirements for enterprise-reference architectures and methodologies - AMENDMENT 1: Additional views for user concerns First Edition; Amendment 1: 08/15/2005

ISO

15705

Water quality Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube method First Edition

Water Quality - Determination of Chloride by Flow Analysis (CFA and FIA) and Photometric or Potentiometric Detection First Edition

ISO ISO ISO ISO ISO ISO

15706 15706-2 15707 15708-1 15708-2 15709

ISO

15710

ISO

15711

ISO

15712-1

ISO

15712-2

ISO

15712-3

ISO ISO ISO ISO

15712-4 15713 15715 15717

ISO

15718

ISO

15720

ISO

15721

ISO

15724

ISO

15730

ISO

15731

ISO

15732

Information and Documentation - International Standard Audiovisual Number (ISAN) First Edition Information and documentation ù International Standard Audiovisual Number (ISAN) ù Part 2: Version identifier First Edition Information and Documentation - International Standard Musical Work Code (ISWC) First Edition Non-Destructive Testing - Radiation Methods - Computed Tomography - Part 1: Principles First Edition Non-Destructive Testing - Radiation Methods - Computed Tomography - Part 2: Examination Practices First Edition Soil Quality - Soil Water and the Unsaturated Zone - Definitions, Symbols and Theory First Edition Paints and Varnishes - Corrosion Testing by Alternate Immersion in and Removal from a Buffered Sodium Chloride Solutions First Edition Paints and Varnishes - Determination of Resistance to Cathodic Disbonding of Coatings Exposed to Sea Water First Edition Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 1: Airborne sound insulation between rooms First Edition Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 2: Impact sound insulation between rooms First Edition Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 3: Airborne sound insulation against outdoor sound First Edition Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 4: Transmission of indoor sound to the outside First Edition Stationary source emissions Sampling and determination of gaseous fluoride content First Edition Binders for Paints and Varnishes - Determination of Turbidity First Edition Kitchen Equipment - Safety Requirements and Test Methods for Kitchen Cabinets and Work Tops First Edition Information Technology - Data Interchange on 8 mm Wide Magnetic Tape Cartridge - Helical Scan Recording - HH-1 Format First Edition Metallic Coatings - Porosity Tests - Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography First Edition Metallic Coatings - Porosity Tests - Porosity in Gold or Palladium Coatings by Sulfurous Acid/Sulfur Dioxide Vapour First Edition Metallic and Other Inorganic Coatings - Electrochemical Measurement of Diffusible Hydrogen in Steels - Barnacle Electrode Method First Edition Metallic and Other Inorganic Coatings - Electropolishing as a Means of Smoothing and Passivating Stainless Steel First Edition Information Technology - 12,65 mm Wide Magnetic Tape Cassette for Information Interchange - Helical Scan Recording - DTF-1 Format First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method First Edition

Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Tensile Stress-Strain Behaviour of Continuous, Fibre-Reinforced Composites at Room Temperature First Edition Ships and Marine Technology - Hydrostatic Release Units First Edition

ISO ISO

15733 15734

ISO ISO ISO ISO

15736 15738 15739 15740

ISO ISO

15741 15744

ISO

15745-1 AMD 1

ISO

15745-1

ISO

15745-2

ISO

15745-3

ISO

15745-4 AMD 2

ISO

15745-4 AMD 1

ISO

15745-4

ISO ISO

15745-5 15747

Industrial automation systems and integration ù Open systems application integration framework ù Part 4: Reference description for Ethernet-based control systems AMENDMENT 2: Profiles for Modbus TCP, EtherCAT and ETHERNET Powerlink First Edition Industrial automation systems and integration ù Open systems application integration framework ù Part 4: Reference description for Ethernet-based control systems AMENDMENT 1: PROFINET profiles First Edition Industrial automation systems and integration Open systems application integration framework Part 4: Reference description for Ethernet-based control systems First Edition Industrial automation systems and integration ù Open systems application integration framework ù Part 5: Reference description for HDLC-based control systems First Edition Plastics containers for intravenous injection First Edition

ISO

15748-1

Ships and Marine Technology - Potable Water Supply on Ships and Marine Structures - Part 1: Planning and Design First Edition

ISO

15748-2

ISO

15749-1

Ships and Marine Technology - Potable Water Supply on Ships and Marine Structures - Part 2: Method of Calculation First Edition Ships and marine technology Drainage systems on ships and marine structures Part 1: Sanitary drainage-system design First Edition

Ships and marine technology Pyrotechnic life-saving appliances Testing, inspection and marking of production units First Edition Ships and Marine Technology - Gas Inflation Systems for Inflatable Life-Saving Appliances First Edition Photography Electronic still-picture imaging Noise measurements First Edition Photography Electronic still picture imaging Picture transfer protocol (PTP) for digital still photography devices First Edition Paints and Varnishes - Friction-Reduction Coatings for the Interior of On- and Offshore Steel Pipelines for Non-Corrosive Gases First Edition Hand-Held Non-Electric Power Tools - Noise Measurement Code - Engineering Method (Grade 2) First Edition Industrial automation systems and integration ù Open systems application integration framework ù Part 1: Generic reference description AMENDMENT 1 First Edition Industrial Automation Systems and Integration - Open Systems Application Integration Framework - Part 1: Generic Reference Description First Edition Industrial automation systems and integration Open systems application integration framework Part 2: Reference description for ISO 11898-based control systems First Edition Industrial automation systems and integration Open systems application integration framework Part 3: Reference description for IEC 61158-based control systems First Edition

Ships and marine technology Drainage systems on ships and marine structures Part 2: Sanitary drainage, drain piping for gravity systems First Edition Ships and marine technology Drainage systems on ships and marine structures Part 3: Sanitary drainage, drain piping for vacuum systems First Edition Ships and marine technology Drainage systems on ships and marine structures Part 4: Sanitary drainage, sewage disposal pipes First Edition Ships and marine technology Drainage systems on ships and marine structures Part 5: Drainage of decks, cargo spaces and swimming pools First Edition Packaging Steel Drums Part 1: Removable Head (Open Head) Drums with a Minimum Total Capacity of 208 l, 210 l and 216,5 I First Edition Packaging Steel Drums Part 2: Non-Removable Head (Tight Head) Drums with a Minimum Total Capacity of 212 I, 216,5 I and 230, I First Edition Packaging - Steel Drums - Part 3: Inserted Flange-Type Closure Systems First Edition

ISO

15749-2

ISO

15749-3

ISO

15749-4

ISO

15749-5

ISO

15750-1

ISO ISO

15750-2 15750-3

ISO ISO ISO

15752 15753 15755

ISO

15757

ISO

15758

ISO ISO

15759 15761

ISO ISO ISO ISO

15763 15764 15765-1 15765-2

ISO

15765-3

Ophthalmic Instruments - Endoilluminators - Fundamental Requirements and Test Methods for Optical Radiation Safety First Edition Animal and vegetable fats and oils Determination of polycyclic aromatic hydrocarbons First Edition Paper and Board - Estimation of Contraries First Edition Information Technology - Data Interchange on 8 mm Wide Magnetic Tape Cartridge - Helical Scan Recording - DA-2 Format First Edition Hygrothermal performance of building equipment and industrial installations Calculation of water vapour diffusion Cold pipe insulation systems First Edition Medical Infusion Equipment - Plastics Caps with Inserted Elastomeric Liner for Containers Manufactured by the Blow-Fill-Seal (BFS) Process Second edition Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries First Edition Road Vehicles - Alarm Systems for Buses and Commercial Vehicles of Maximum Authorized Total Mass Greater Than 3,5 t First Edition Road vehicles Extended data link security First Edition Road vehicles Diagnostics on Controller Area Networks (CAN) Part 1: General information Frist Edition Road vehicles Diagnostics on Controller Area Networks (CAN) Part 2: Network layer services First Edition Road vehicles Diagnostics on Controller Area Networks (CAN) Part 3: Implementation of unified diagnostic services (UDS on CAN) First Edition

ISO ISO

15765-4 15767

Road vehicles Diagnostics on Controller Area Networks (CAN) Part 4: Requirements for emissions-related systems First Edition Workplace Atmospheres - Controlling and Characterizing errors in weighing Collected Aerosols First Edition

ISO

15771

ISO

15772

ISO

15773

ISO

15774

ISO

15775

ISO ISO ISO ISO ISO ISO ISO ISO ISO

15775 FDAM 1 15776 15780 15782-1 15782-2 15783 15783 DAM 1 15785 15787

ISO

15788-1

ISO

15788-2

ISO ISO

15790 15791-1

ISO

15792-1

ISO

15792-2

ISO ISO ISO

15792-3 15793 15794

Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Common Information Additional Network Feature First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Common Information Additional Network Feature Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Broadband Private Integrated Services Network - Inter-Exchange Signalling Protocol - Transit Counter Additional Network Feature First Edition Animal and Vegetable Fats and Oils - Determination of Cadmium Content by Direct Graphite Furnace Atomic Absorption Spectrometry First Edition Information Technology - Office Machines - Method of Specifying Image Reproduction of Colour Copying Machines by Analog Test Charts - Realisation and Application First Edition; AMD 1: 3/1/2005 Information technology Office machines Method of specifying image reproduction of colour copying machines by analog test charts Realisation and application AMENDMENT 1 VME64bus - Specification First Edition Information Technology - 8 mm Wide Magnetic Tape Cartridge - Helical Scan Recording - AIT-1 Format First Edition Certificate Management for Financial Services - Part 1: Public Key Certificates First Edition Banking - Certificate Management - Part 2: Certificate Extensions First Edition Seal-Less Rotodynamic Pumps - Class II - Specification First Edition Seal-Less Rotodynamic Pumps - Class II - Specification Technical Drawings - Symbolic Presentation and Indication of Adhesive, Fold and Pressed Joints First Edition Technical Product Documentation - Heat-Treated Ferrous Parts - Presentation and Indications First Edition Animal and Vegetable Fats and Oils - Determination of Stigmastadienes in Vegetable Oils - Part 1: Method Using Capillary-Column Gas Chromatography (Reference Method) First Edition Animal and Vegetable Fats and Oils - Determination of Stigmastadienes in Vegetable Oils - Part 2: Method Using High-Performance Liquid Chromatography (HPLC) First Edition Graphic technology and photography Certified reference materials for reflection and transmission metrology Documentation and procedures for use, including determination of combined standard uncertainty First Edition Plastics Development and use of Intermediate-Scale Fire Tests for Plastics Products Part 1: General Guidance Welding Consumables - Test Methods - Part 1: Test Methods for All-Weld Metal Test Specimens in Steel, Nickel and Nickel Alloys First Edition Welding Consumables - Test Methods - Part 2: Preparation of Single-Run and Two-Run Technique Test Specimens in Steel First Edition Welding Consumables - Test Methods - Part 3: Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld First Edition; Corrigendum 1: 11/1/2006 Durum Wheat Semolinas - Determination of the Undersize Fraction First Edition Bi-Directional and Multi-Directional Fork-Lift Trucks - Stability Tests First Edition

ISO

15795 CORR 1

ISO ISO ISO ISO ISO ISO ISO

15795 15796 15797 CORR 1 15797 15798 15799 15800

ISO

15802-1

ISO

15802-2

ISO

15802-3

ISO ISO ISO ISO ISO ISO ISO

15802-4 15812 15814 15816 15817 15821 15822

ISO

15825 CORR 1

ISO ISO

15825 15828

ISO

15829

ISO

15830-1

ISO

15830-2

Optics and optical instruments ù Quality evaluation of optical systems ù Assessing the image quality degradation due to chromatic aberrations TECHNICAL CORRIGENDUM 1 First Edition Optics and Optical Instruments - Quality Evaluation of Optical Systems - Assessing the Image Quality Degradation due to Chromatic Aberrations First Edition Gas analysis Investigation and treatment of analytical bias First Edition Textiles ù Industrial washing and finishing procedures for testing of workwear TECHNICAL CORRIGENDUM 1 First Edition Textiles - Industrial Washing and Finishing Procedures for Testing of Workwear First Edition Ophthalmic Implants - Ophthalmic Viscosurgical Devices First Edition; Technical Corrigendum 1: 11/1/03 Soil Quality - Guidance on the Ecotoxicological Characterization of Soils and Soil Materials First Edition Soil quality - Characterization of soil with respect to human exposure First Edition Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks Common Specifications - Part 1: Medium Access Control (MAC) Service Definition First Edition; Replaces ISO 10039 Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks Common Specifications - Part 2: LAN/MAN Management First Edition; (ANSI/IEEE 802.1B) Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks Common Specifications - Part 3: Media Access Control (MAC) Bridges First Edition; ANSI/IEEE Std 802.1D Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks Common Specifications - Part 4: System Load Protocol First Edition; (ANSI/IEEE 802.1E) Continuous Mill Flat Rolled Products - Guidelines for Improved Ordering Communication First Edition Implants for Surgery - Copolymers and Blends Based on Polylactide - In Vitro Degradation Testing First Edition Information Technology - Security Techniques - Security Information Objects for Access Control First Edition Earth-moving machinery - Safety requirements for remote operator control First Edition Doorsets and windows ù Watertightness test under dynamic pressure ù Cyclonic aspects First Edition Test method of doorset opening performance in diagonal deformation ù Seismic aspects First Edition Rubber compounding ingredients ù Carbon black ù Determination of aggregate size distribution by disc centrifuge photosedimentometry TECHNICAL CORRIGENDUM 1 First Edition Rubber compounding ingredients ù Carbon black ù Determination of aggregate size distribution by disc centrifuge photosedimentometry First Edition Road vehicles Offset frontal impact test procedure First Edition Road vehicles Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation First Edition Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 1: Terminology and rationale First Edition Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 2: Mechanical subsystems First Edition

ISO

15830-3

ISO ISO ISO

15830-4 15831 15836

ISO

15837

ISO ISO

15838 15839

ISO ISO

15840 15841

ISO

15848-1

ISO

15848-2

ISO

15849

ISO ISO ISO

15850 15851 15852

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

15853 15854 15859-1 15859-2 15859-3 15859-4 15859-5 15859-6 15859-7 15859-8 15859-9

Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 3: Electronic subsystems First Edition Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 4: User┤s manual First Edition Clothing Physiological effects Measurement of thermal insulation by means of a thermal manikin First Edition Information and documentation The Dublin Core metadata element set First Edition Ships and marine technology Gasketed mechanical couplings for use in piping systems Performance specification First Edition Ships and marine technology Fittings for use with gasketed mechanical couplings used in piping applications Performance specification First Edition Water quality On-line sensors/analysing equipment for water Specifications and performance tests First Edition Ships and marine technology Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications First Edition Dentistry Wires for use in orthodontics First Edition Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 1: Classification system and qualification procedures for type testing of valves First Edition Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 2: Production acceptance test of valves First Edition Ships and marine technology Guidelines for implementation of a fleet management system network First Edition; Amendment 1: 09/01/2003 Plastics - Determination of Tension-Tension Fatigue Crack Propagation - Linear Elastic Fracture Mechanics (LEFM) Approach First Edition Information Technology - Communication Protocol - Open MUMPS Interconnect First Edition Information Technology - Programming Languages - M Windowing API First Edition Thermoplastics Materials - Preparation of Tubular Test Pieces for the Determination of the Hydrostatic Strength of Materials Used for Injection Moulding First Edition Dentistry - Casting and baseplate waxes First Edition; Replaces ISO 1561:1995 and ISO 12163:1999 Space systems Fluid characteristics, sampling and test methods Part 1: Oxygen First Edition Space systems Fluid characteristics, sampling and test methods Part 2: Hydrogen First Edition Space systems Fluid characteristics, sampling and test methods Part 3: Nitrogen First Edition Space systems Fluid characteristics, sampling and test methods Part 4: Helium First Edition Space systems Fluid characteristics, sampling and test methods Part 5: Nitrogen tetroxide propellants First Edition Space systems Fluid characteristics, sampling and test methods Part 6: Monomethylhydrazine propellant First Edition Space systems Fluid characteristics, sampling and test methods Part 7: Hydrazine propellant First Edition Space systems Fluid characteristics, sampling and test methods Part 8: Kerosine propellant First Edition Space systems Fluid characteristics, sampling and test methods Part 9: Argon First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

15859-10 15859-11 15859-12 15859-13 15860 15863 15864 15865 15867 15870 15871 15872 15873

Space systems Fluid characteristics, sampling and test methods Part 10: Water First Edition Space systems Fluid characteristics, sampling and test methods Part 11: Ammonia First Edition Space systems Fluid characteristics, sampling test methods Part 12: Carbon dioxide First Edition Space systems Fluid characteristics, sampling and test methods Part 13: Breathing air First Edition Space systems Gas contamination Measurement methods for field tests First edition Space systems Spacecraft-to-launch-vehicle interface control document First Edition Space systems General test methods for space craft, subsystems and units First Edition Space systems Qualification assessment First Edition Intermediate bulk containers (IBCs) for non-dangerous goods Terminology First Edition Powered Industrial Trucks - Safety Signs and Hazard Pictorials - General Principles First Edition Industrial Trucks - Specification for Indicator Lights for Container Handling and Grappler Arm Operations First Edition Aerospace UNJ threads Gauging First Edition Irrigation Equipment - Differential Pressure Ventrui-Tyope Liquid Additive Injectors First Edition

ISO ISO

15874-1 AMD 1 15874-1

Plastics piping systems for hot and cold water installations ù Polypropylene (PP) ù Part 1: General AMENDMENT 1 First Edition Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 1: General First Edition

ISO ISO ISO

15874-2 AMD 1 15874-2 15874-3

Plastics piping systems for hot and cold water installations ù Polypropylene (PP) ù Part 2: Pipes AMENDMENT 1 First Edition Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 2: Pipes First Edition Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 3: Fittings First Edition

ISO

15874-5

ISO ISO

15875-1 AMD 1 15875-1

ISO ISO ISO

15875-2 AMD 1 15875-2 15875-3

ISO

15875-5

ISO ISO

15876-1 AMD 1 15876-1

Plastics piping systems for hot and cold water installations ù Polybutylene (PB) ù Part 1: General AMENDMENT 1 First Edition Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General First Edition

ISO

15876-2 AMD 1

Plastics piping systems for hot and cold water installations ù Polybutylene (PB) ù Part 2: Pipes AMENDMENT 1 First edition

Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 5: Fitness for purpose of the system First Edition Plastics piping systems for hot and cold water installations ù Crosslinked polyethylene (PE-X) ù Part 1: General AMENDMENT 1 First Edition Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General First Edition Plastics piping systems for hot and cold water installations ù Crosslinked polyethylene (PE-X) ù Part 2: Pipes AMENDMENT 1 First Edition Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes First Edition Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings First Edition Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system First Edition

ISO ISO

15876-2 15876-3

Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 2: Pipes First edition Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 3: Fittings First Edition

ISO

15876-5

Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 5: Fitness for purpose of the system First Edition

ISO

15877-1

Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 1: General First Edition

ISO

15877-2

Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 2: Pipes First Edition

ISO

15877-3

ISO ISO

15877-5 15880

Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings First Edition Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 5: Fitness for purpose of the system First Edition Paint, Varnishes and Binders - Determination of MEQ Value of Water-Based Coating Materials and Binders First Edition

ISO ISO

15882 15883-1

ISO

15883-2

ISO ISO ISO ISO

15883-3 15884 15885 15886-1

ISO ISO ISO ISO

15886-3 15887 15888 15889

Sterilization of Health Care Products - Chemical Indicators - Guidance for Selection, Use and Interpretation of Results First Edition Washer-disinfectors Part 1: General requirements, terms and definitions and tests First Edition Washer-disinfectors Part 2: Requirements and tests for washerdisinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. First Edition Washer-disinfectors Part 3: Requirements and tests for washerdisinfectors employing thermal disinfection for human waste containers First Edition Milk fat Preparation of fatty acid methyl esters First Edition; IDF 182 Milk fat Determination of the fatty acid composition by gas-liquid chromatography First Edition; IDF 184 Agricultural irrigation equipment Sprinklers Part 1: Definition of terms and classification First Edition Agricultural irrigation equipment Sprinklers Part 3: Characterization of distribution and test methods First Edition; Supersedes ISO 7749-2 Space Data and Information Transfer Systems - Data Systems - Lossless Data Compression First Edition Space Data and Information Transfer Systems - Standard Formatted Data Units - Referencing Environment First Edition Space data and information transfer systems - Data description language - EAST specification Second Edition

ISO

15891

Space Data and Information Transfer Systems - Protocol Specification for Space Communications - Network Protocol First Edition

ISO

15892

Space Data and Information Transfer Systems - Protocol Specification for Space Communications - Security Protocol First Edition

ISO

15893

Space Data and Information Transfer Systems - Protocol Specification For Space Communications - Transport Protocol First Edition

ISO

15894

Space Data and Information Transfer Systems - Protocol Specification For Space Communications - File Protocol First Edition

ISO ISO ISO

15895 15896 15897

Information Technology - Data Interchange on 12,7 mm 128-Track Magnetic Tape Cartridges - DLT 3-XT Format First Edition Information Technology - Data Interchange on 12,7 mm 208-Track Magnetic Tape Cartridges - DLT 5 Format First Edition Information Technology - Procedures for Registration of Cultural Elements First Edition Information Technology - Data Interchange on 356 mm Optical Disk Cartridges - WORM, Using Phase Change Technology Capacity: 14,8 Gbytes and 25 Gbytes per Cartridge First Edition Information Technology - Telecommunications and Information Exchange between Systems - Broadband Private Integrated Services Network - Service Description - Broadband Connection Oriented Bearer Services First Edition Evaluation of pore size distribution and porosimetry of solid materials by mercury porosimetry and gas adsorption ù Part 1: Mercury porosimetry TECHNICAL CORRIGENDUM 1 First Edition Evaluation of pore size distribution and porosimetry of solid materials by mercury porosimetry and gas adsorption Part 1: Mercury porosimetry First Edition Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 2: Analysis of mesopores and macropores by gas adsorption TECHNICAL CORRIGENDUM 1 First Edition Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 2: Analysis of mesopores and macropores by gas adsorption First Edition Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption ù Part 3: Analysis of micropores by gas adsorption First edition Optics and photonics ù Diffractive optics ù Vocabulary TECHNICAL CORRIGENDUM 1 Optique et photonique ù Optique diffractive ù Vocabulaire RECTIFICATIF TECHNIQUE 1 First Edition

ISO

15898

ISO

15899

ISO

15901-1 CORR 1

ISO

15901-1

ISO

15901-2 CORR 1

ISO

15901-2

ISO

15901-3

ISO

15902 CORR 1

ISO ISO

15902 15903

Optics and photonics ù Diffractive optics ù Vocabulary Optique et photonique ù Optique diffractive ù Vocabulaire First Edition Soil Quality - Format for Recording Soil and Site Information First Edition

ISO

15906

Carbonaceous materials for the production of aluminium ù Baked anodes ù Determination of the air permeability First Edition

ISO ISO ISO

15908 15909-1 15910

Adhesives for Thermoplastic Piping Systems - Test Method for the Determination of Thermal Stability of Adhesives First Edition Software and system engineering High-level Petri nets Part 1: Concepts, definitions and graphical notation First Edition Information Technology - Software User Documentation Process First Edition

ISO

15911

ISO

15912

ISO ISO ISO

15913 15914 15917

Petroleum Products - Estimation of Net Specific Energy of Aviation Turbine Fuels Using Hydrogen Content Data First Edition Dentistry Casting investments and refractory die materials First Edition; Supersedes ISO 7490:2000, ISO 9694:1996, ISO 11244:1999, ISO 11245:1999 and ISO 11246:1996 Water Quality - Determination of Selected Phenoxyalkanoic Herbicides, Including Bentazones and Hydroxybenzonitriles by Gas Chromatography and Mass Spectrometry After Solid Phase Extraction and Derivatization First Edition Animal feeding stuffs Enzymatic determination of total starch content First Edition Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials ù Dimensions First Edition

ISO

15919

ISO

15924

ISO

15926-1

ISO

15926-2

ISO

15927-1

ISO

15927-4

ISO

15927-5

ISO ISO ISO

15927-6 15928-1 15928-2

ISO

15929

ISO

15930-1

ISO

15930-3

ISO

15930-4

ISO

15930-5

ISO

15930-6

ISO

15938-1 AMD 2

ISO

15938-1 CORR 2

ISO

15938-1 CORR 1

Information and Documentation - Transliteration of Devanagari and Related Indic Scripts into Latin Characters First Edition Information and documentation Codes for the representation of names of scripts Information et documentation Codes pour la reprÚsentation des noms d'Úcritures First Edition Industrial automation systems and integration Integration of life-cycle data for process plants including oil and gas production facilities Part 1: Overview and fundamental principles First Edition Industrial automation systems and integration Integration of life-cycle data for process plants including oil and gas production facilities Part 2: Data model First Edition Hygrothermal performance of buildings Calculation and presentation of climatic data Part 1: Monthly means of single meteorological elements First Edition Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling First Edition Hygrothermal performance of buildings Calculation and presentation of climatic data Part 5: Data for design heat load for space heating First Edition Hygrothermal performance of buildings ù Calculation and presentation of climatic data ù Part 6: Accumulated temperature differences (degree days) First Edition Houses Description of performance Part 1: Structural safety First Edition Houses Description of performance Part 2: Structural serviceability First Edition Graphic Technology - Prepass Digital Data Exchange - Guidelines and Principles for the Development of PDF/X Standards First Edition Graphic Technology - Prepress Digital Data Exchange - Use of PDF - Part 1: Complete Exchange Using CMYK Data (PDF/X-1 and PDF/X-1a) First Edition Graphic Technology - Prepress Digital Data Exchange - Use of PDF - Part 3: Complete Exchange Suitable for Colour-Managed Workflows (PDF/X-3) Graphic technology Prepress digital data exchange using PDF Part 4: Complete exchange of CMYK and spot colour printing data using PDF 1.4 (PDF/X-1a) First Edition Graphic technology Prepress digital data exchange using PDF Part 5: Partial exchange of printing data using PDF 1.4 (PDF/X-2) First Edition Graphic technology Prepress digital data exchange using PDF Part 6: Complete exchange of printing data suitable for colourmanaged workflows using PDF 1.4 (PDF/X-3) First Edition Information technology ù Multimedia content description interface ù Part 1: Systems AMENDMENT 2: Fast access extension First Edition Information technology ù Multimedia content description interface ù Part 1: Systems TECHNICAL CORRIGENDUM 2 First Edition Information technology ù Multimedia content description interface ù Part 1: Systems AMENDMENT 1: Systems extensions TECHNICAL CORRIGENDUM 1 First Edition

Information technology ù Multimedia content description interface ù Part 1: Systems AMENDMENT 1: Systems extensions First Edition

ISO

15938-1 AMD 1

ISO ISO ISO

15938-1 CORR 1 15938-1 15938-2

ISO

15938-3 CORR 1

Information technology ù Multimedia content description interface ù Part 1: Systems TECHNICAL CORRIGENDUM 1 First Edition Information technology ù Multimedia content description interface ù Part 1: Systems First Edition Information Technology - Multimedia Content Description Interface - Part 2: Description Definition Language First Edition Information technology ù Multimedia content description interface ù Part 3: Visual AMENDMENT 2: Perceptual 3D Shape Descriptor TECHNICAL CORRIGENDUM 1 First Edition

ISO ISO ISO

15938-3 CORR 2 15938-3 AMD 2 15938-3 CORR 1

Information Technology - Multimedia Content Description Interface - Part 3: Visual AMENDMENT 1: Visual extensions First Edition Information technology ù Coding of audio-visual objects ù Part 3: Visual AMENDMENT 2: Perceptual 3D Shape Descriptor Information Technology - Multimedia Content Description Interface - Part 3: Visual AMENDMENT 1: Visual extensions

ISO ISO ISO

15938-3 AMD 1 15938-3 CORR 1 15938-3

Information Technology - Multimedia Content Description Interface - Part 3: Visual AMENDMENT 1: Visual extensions First Edition Information Technology - Multimedia Content Description Interface - Part 3: Visual First Edition Information Technology - Multimedia Content Description Interface - Part 3: Visual First Edition

ISO

15938-4 AMD 2

Information technology Multimedia content description interface Part 4: Audio AMENDMENT 2: High-level descriptors First Edition

ISO ISO ISO

15938-4 AMD 1 15938-4 15938-4 FDAM 2

ISO

15938-5 AMD 2

ISO

15938-5 CORR 1

ISO ISO

15938-5 AMD 1 15938-5

ISO ISO

15938-6 CORR 1 15938-6

ISO

15938-6 FDAM 1

ISO

15938-7 AMD 2

Information technology Multimedia content description interface Part 4: Audio AMENDMENT 1: Audio extensions First Edition Information technology Multimedia content description interface Part 4: Audio First Edition Information technology Multimedia content description interface Part 4: Audio AMENDMENT 2: High-level descriptors Information technology ù Multimedia content description interface ù Part 5: Multimedia description schemes AMENDMENT 2: Multimedia description schemes user preference extensions First Edition Information technology ù Multimedia content description interface ù Part 5: Multimedia description schemes TECHNICAL CORRIGENDUM 1 First Edition Information technology ù Multimedia content description interface ù Part 5: Multimedia description schemes AMENDMENT 1: Multimedia description schemes extensions First Edition Information technology ù Multimedia content description interface ù Part 5: Multimedia description schemes First Edition Information technology ù Multimedia content description interface ù Part 6: Reference software AMENDMENT 1: Reference software extensions First Edition Information technology Multimedia content description interface Part 6: Reference software First Edition Information technology Multimedia content description interface Part 6: Reference software AMENDMENT 1: Reference software extensions Information technology ù Multimedia content description interface ù Part 7: Conformance testing AMENDMENT 2: Fast access extensions conformance First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

Information technology ù Multimedia content description interface ù Part 7: Conformance testing AMENDMENT 1: Conformance extensions First Edition Information technology ù Multimedia content description interface ù Part 7: Conformance testing First Edition Information technology ù Multimedia content description interface ù Part 7: Conformance testing AMENDMENT 3: Conformance 15938-7 FDAM 3 testing of perceptual 3D shape descriptor 15938-9 Information technology Multimedia content description interface Part 9: Profiles and levels First Edition 15938-10 CORR 1 Information technology ù Multimedia content description Interface ù Part 10: Schema definition First edition 15938-10 Information technology Multimedia content description interface Part 10: Schema definition First edition 15939 Software Engineering Software Measurement Process First Edition FDIS 15939 Systems and software engineering ù Measurement process 15940 Information Technology Software Engineering Environment Services First Edition Information Technology - Business Agreement Semantic Descriptive Techniques - Part 1: Operational Aspects of Open-Edi for 15944-1 Implementation First Edition Information technology Business Operational View Part 2: Registration of scenarios and their components as business objects First 15944-2 Edition Information Technology - Security Techniques - Specification of TTP Services to Support the Application of Digital Signatures First 15945 Edition 15938-7 AMD 1 15938-7

ISO

15946-1

ISO

15946-2

ISO

15946-3

ISO

15946-4

ISO

15952

ISO

15953

ISO

15954

ISO

15955

Information technology Security techniques Cryptographic techniques based on elliptic curves Part 1: General First Edition Information Technology - Security Techniques - Cryptographic Techniques Based on Elliptic Curves - Part 2: Digital Signatures First Edition Information Technology - Security Techniques - Cryptographic Techniques Based on Elliptic Curves - Part 3: Key Establishment First Edition Information technology Security techniques Cryptographic techniques based on elliptic curves Part 4: Digital signatures giving message recovery First Edition Soil quality Effects of pollutants on juvenile land snails (Helicidae) Determination of the effects on growth by soil contamination First Edition Information Technology - Open Systems Interconnection - Service Definition for the Application Service Object Association Control Service Element First Edition Information Technology - Open Systems Interconnection - Connection-Mode Protocol for the Application Service Object Association Control Service Element First Edition; Replaces ISO/IEC 8650-1:1999 Information Technology - Open Systems Interconnection - Connectionless Protocol for the Application Service Object Association Control Service Element First Edition; Replaces ISO/IEC 10035-1: 1995

ISO

15961

Information technology Radio frequency identification (RFID) for item management Data protocol: application interface First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

15962 15963 15967 15968 15973 15974 15975 15976 15977 15978 15979 15980 15981 15982 15983 15984

ISO ISO ISO ISO ISO

15985 15987 15988 15989 CORR 15989

ISO

15991

ISO ISO ISO ISO ISO ISO ISO ISO

15992 15994 15996 16000-1 16000-2 16000-3 16000-4 16000-5

Information technology Radio frequency identification (RFID) for item management Data protocol: data encoding rules and logical memory functions First Edition Information technology Radio frequency identification for item management Unique identification for RF tags First Edition Direct reduced iron ù Determination of the tumble and abrasion indices of hot briquetted iron (HBI) Second Edition Direct Reduced Iron - Determination of Apparent Density and Water Absorption of Hot Briquetted Iron (HBI) First Edition Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - AIA/St First Edition Closed End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/St First Edition Closed End Blind Rivets With Break Pull Mandrel and Protruding Head - AI/AIA First Edition Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - St/St First Edition Open End Blind Rivets with Break Pull Mandrel and Protruding Head - AIA/St First Edition Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/St First Edition Open End Blind Rivets with Break Pull Mandrel and Protruding Head - St/St First Edition Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - St/St First Edition Open End Blind Rivets with Break Pull Mandrel and Protruding Head - AIA/AIA First Edition Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/AIA First Edition Open End Blind Rivets with Break Pull Mandrel and Protruding Head - A2/A2 First Edition Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - A2/A2 First Edition Plastics Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions Method by analysis of released biogas First Edition Plastics Film and sheeting Biaxially oriented polyamide (nylon) films First edition Plastics Film and sheeting Biaxially oriented poly(ethylene terephthalate) (PET) films First Edition Plastics Film and sheeting Measurement of water-contact angle of corona-treated films Plastics Film and sheeting Measurement of water-contact angle of corona-treated films First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Priority Interruption and Call Priority Interruption Protection Supplementary Services Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Call Priority Interruption and Call Priority Interruption Protection Supplementary Services Second Edition Graphic technology Testing of prints Visual lustre First Edition Gas cylinders Residual pressure valves General requirements and type testing First edition Indoor air Part 1: General aspects of sampling strategy First Edition Indoor air Part 2: Sampling strategy for formaldehyde First Edition Indoor Air - Part 3: Determination of Formaldeyhde and Other Corbonyl Compounds - Active Sampling Method First Edition Indoor air Part 4: Determination of formaldehyde Diffusive sampling method First Edition Indoor air ù Part 5: Sampling strategy for volatile organic compounds (VOCs) First Edition

ISO ISO

16000-6 16000-8

ISO

16000-9 CORR 1

ISO

16000-9

ISO

16000-10

ISO ISO

16000-11 16002

ISO

16004

ISO ISO ISO

16010 16012 CORR 1 16012

ISO

16014-1 CORR 1

ISO

16014-1

ISO

16014-2

ISO

16014-3

ISO ISO

16014-4 16016

ISO

16017-1

ISO

16017-2

ISO

16020

Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID First Edition Indoor air ù Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions First Edition Indoor air ù Part 9: Determination of the emission of volatile organic compounds from building products and furnishing ù Emission test chamber method TECHNICAL CORRIGENDUM 1 First Edition Indoor air Part 9: Determination of the emission of volatile organic compounds from building products and furnishing Emission test chamber method First Edition Indoor air Part 10: Determination of the emission of volatile organic compounds from building products and furnishing Emission test cell method First Edition Indoor air Part 11: Determination of the emission of volatile organic compounds from building products and furnishing Sampling, storage of samples and preparation of test specimens First Edition Stored cereal grains and pulses Guidance on the detection of infestation by live invertebrates by trapping First Edition Aircraft ground equipment Passenger boarding bridge or transfer vehicle Requirements for interface with aircraft doors First Edition Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids First Edition Plastics ù Determination of linear dimensions of test specimens TECHNICAL CORRIGENDUM 1 First Edition Plastics ù Determination of linear dimensions of test specimens First Edition Plastics ù Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography ù Part 1: General principles TECHNICAL CORRIGENDUM 1 First Edition Plastics - Determination of Average Molecular Mass and Molecular Mass Distribution of Polymers Using Size-Exclusion Chromatography - Part 1: General Principles First Edition Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 2: Universal calibration method First Edition Plastics - Determination of Average Molecular Mass and Molecular Mass Distribution of Polymers Using Size-Exclusion Chromatography - Part 3: Low-Temperature Method First Edition Plastics - Determination of Average Molecular Mass and Molecular Mass Distribution of Polymers Using Size-Exclusion Chromatography - Part 4: High-Temperature Method First Edition Technical Product Documentation - Protection Notices for Restricting the Use of Documents and Products First Edition Indoor, Ambient and Workplace Air - Sampling and Analysis of Volatile Organic Compounds by Sorbent Tube/Thermal Desorption/Capillary Gas Chromatography - Part 1: Pumped Sampling First Edition Indoor, Ambient and Workplace Air - Sampling and Analysis of Volatile Organic Compounds by Sorbent Tube/Thermal Desorption/Capillary Gas Chromatography - Part 2: Diffusive Sampling First Edition Steel for the reinforcement and prestressing of concrete Vocabulary Aciers pour l'armature et la prÚcontrainte du bÚton Vocabulaire First Edition

ISO

16021

ISO ISO ISO

16022 16023 16024

ISO

16028

ISO ISO

16028 FDAM 1 16030

ISO

16031-1

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

16031-2 16032 16034 CORR 1 16034 16035 16037 16038 16039 16042 16047 16048 16049-1 16049-2

ISO ISO ISO ISO ISO ISO ISO

16050 16053 16054 16055 16057 16061 16063-1

Urine-Absorbing Aids - Basic Principles for Evaluation of Single-Use Adult-Incontinence-Absorbing Aids from the Perspective of Users and Caregivers First Edition Information technology Automatic identification and data capture techniques Data Matrix bar code symbology specification Second Edition Information Technology - International Symbology Specification - MaxiCode First Edition Personal protective equipment for protection against falls from a height Flexible horizontal lifeline systems First Edition Hydraulic Fluid Power - Flush-Face Type, Quick-action Couplings for Use at Pressures of 20 MPa (200 Bar) to 31, 5 MPa (315 Bar) Specifications First Edition; Amendment 1: 01/15/2006 Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31, 5 MPa (315 bar) Specifications - First Edition; Amendment 1:9/20/2005 Pneumatic Fluid Power - Connections - Ports and Stud Ends First Edition; Amendment 1: 4/1/2005 Aerospace Fluid Systems - O-Rings, Inch Series: Inside Diameters and Cross Sections, Tolerances and Size-Identification Codes Part 1: Close Tolerances for Hydraulic Systems First Edition Aerospace fluid systems O-rings, inch series: Inside diameters and cross sections, tolerances and size identification codes Part 2: Standard tolerances for non-hydraulic systems First Edition Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method First Edition Ophthalmic optics ù Specifications for single-vision ready-to-wear near-vision spectacles First Edition Ophthalmic optics ù Specifications for single-vision ready-to-wear near-vision spectacles First Edition Animal and Vegetable Fats and Oils - Determination of Low-Boiling Halogenated Hydrocarbons in Edible Oils First Edition Rubber Condoms for Clinical Trials - Measurement of Physical Properties First Edition Rubber condoms Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms First Edition Road construction and maintenance equipment Slipform pavers Definitions and commercial specifications First Edition Iron ores ù Guidelines for the use of certified reference materials (CRMs) First Edition Fasteners Torque/clamp force testing First Edition Passivation of Corrosion-Resistant Stainless-Steel Fasteners First Edition Air Cargo Equipment - Restraint Straps - Part 1: Design Criteria and Testing Methods First Edition Air cargo equipment Restraint straps Part 2: Utilization guidelines and lashing calculations First Edition Foodstuffs Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products High-performance liquid chromatographic method First Edition Paints and varnishes Coating materials and coating systems for exterior wood Natural weathering test First Edition Implants for Surgery - Minimum Data Sets for Surgical Implants First Edition Tobacco and Tobacco Products - Monitor Test Piece - Requirements and Use First Edition Coated Abrasives - Vulcanized Fibre Discs First Edition Instrumentation for Use in Association with Non-Active Surgical Implants - General Requirements First Edition Methods for the Calibration of Vibration and Shock Transducers - - Part 1: Basic Concepts First Edition

ISO

16063-11

ISO

16063-12

ISO

16063-13

ISO

16063-15

ISO

16063-21

ISO ISO ISO

16063-22 16065-1 16065-2

ISO

16067-1

ISO ISO ISO ISO ISO ISO

16067-2 16069 16070 16072 16085 16091

ISO

16100-1

ISO

16100-2

ISO

16100-3

ISO ISO ISO ISO

16100-4 16101 16103 16104

ISO

16106

Methods for the Calibration of Vibration and Shock Tranducers - Part 11: Primary Vibration Calibration by Laser Interferometry First Edition; Replaces ISO 5347-1 Methods for the Calibration of Vibration and Shock Transducers - Part 12: Primary Vibration Calibration by the Reciprocity Method First Edition Methods for the Calibration of Vibration and Shock Tranducers - Part 13: Primary Shock Calibration by Laser Interferometry First Edition Methods for the calibration of vibration and shock transducers Part 15: Primary angular vibration calibration by laser interferometry First Edition Methods for the calibration of vibration and shock transducers Part 21: Vibration calibration by comparison to a reference transducer First Edition Methods for the calibration of vibration and shock transducers Part 22: Shock calibration by comparison to a reference transducer First Edition; Supersedes ISO 5347-4 Pulps - Determination of Fibre Length by Automated Optical Analysis - Part 1: Polarized Light Method First Edition Pulps ù Determination of fibre length by automated optical analysis ù Part 2: Unpolarized light method First Edition Photography Spatial resolution measurements of electronic scanners for photographic images Part 1: Scanners for reflective media First Edition Photography Electronic scanners for photographic images Spatial resolution measurements Part 2: Film scanners First Edition Graphical symbols Safety signs Safety way guidance systems (SWGS) First Edition Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples Second Edition Soil quality Laboratory methods for determination of microbial soil respiration First Edition Systems and software engineering Life cycle processes Risk management Second Edition; IEEE Std 16085-2006 Space Systems - Integrated Logistic Support First Edition Industrial automation systems and intergration - Manufacturing software capability profiling for interoperability - Part1: Framework First edition Industrial automation systems and integration Manufacturing software capability profiling for interoperability Part 2: Profiling methodology First Edition Industrial automation systems and integration Manufacturing software capability profiling for interoperability Part 3: Interface services, protocols and capability templates First Edition Industrial automation systems and integration Manufacturing software capability profiling for interoperability Part 4: Conformance test methods, criteria and reports First Edition Packaging Transport packaging for dangerous goods Plastics compatibility testing First Edition Packaging Transport packaging for dangerous goods Recycled plastics material First Edition Packaging Transport packaging for dangerous goods Test methods First Edition Packaging Transport packages for dangerous goods Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings Guidelines for the application of ISO 9001 First Edition

ISO ISO ISO ISO

16107 16112 16120-1 16120-2

ISO ISO

16120-3 16120-4

ISO ISO

16121-1 16121-2

ISO

16121-3

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

16121-4 16124 16132 16133 16135 16136 16137 16138 16139 16140 16143-1 16143-2 16143-3 16147 16148

ISO

16149

ISO ISO

16151 16152

ISO ISO

16154 16155

Workplace Atmospheres - Protocol for Evaluating the Performance of Diffusive Samplers First Edition Compacted (vermicular) graphite cast irons Classification First Edition Non-alloy steel wire rod for conversion to wire Part 1: General requirements First Edition Non-alloy steel wire rod for conversion to wire Part 2: Specific requirements for general purpose wire rod First Edition Non-alloy steel wire rod for conversion to wire Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod First Edition Non-alloy steel wire rod for conversion to wire Part 4: Specific requirements for wire rod for special applications First Edition Road vehicles - Ergonomic requirements for the driver┤s workplace in line-service buses - Part 1: General description, basic requirements First Edition Road vehicles - Ergonomic requirements for the driver┤s workplace in line-service buses - Part 2: Visibility First Edition Road vehicles Ergonomic requirements for the driver┤s workplace in line-service buses Part 3: Information devices and controls First Edition Road vehicles Ergonomic requirements for the driver┤s workplace in line-service buses Part 4: Cabin environment First Edition Steel wire rod Dimensions and tolerances First Edition; Replaces ISO 8457-1: 1989 Ductile iron pipes and fittings Seal coats for cement mortar linings First Edition Soil quality Guidance on the establishment and maintenance of monitoring programmes First Edition Industrial valves - Ball valves of thermoplastics materials First Edition Industrial valves Butterfly valves of thermoplastics materials First Edition Industrial valves Check valves of thermoplastics materials First Edition Industrial valves Diaphragm valves of thermoplastics materials First Edition Industrial valves Gate valves of thermoplastics materials First Edition Microbiology of food and animal feeding stuffs Protocol for the validation of alternative methods First Edition Stainless steels for general purposes Part 1: Flat products First Edition Stainless steels for general purposes Part 2: Semi-finished products, bars, rods and sections First Edition Stainless steels for general purposes Part 3: Wire First edition Small Craft - Inboard Diesel Engines - Engine-Mounted Fuel and Electrical Components First Edition Gas cylinders Refillable seamless steel gas cylinders Acoustic emission testing (AT) for periodic inspection First Edition Agricultural irrigation equipment PVC above-ground low-pressure pipe for surface irrigation Specifications and test methods First Edition Corrosion of metals and alloys Accelerated cyclic tests with exposure to acidified salt spray, dry and wet conditions First Edition Plastics - Determination of xylenesoluble matter in polypropylene First Edition; Replaces ISO 6427 Tractors and machinery for agriculture and forestry Installation of lighting, light signalling and marking devices for travel on public roadways First Edition Ships and marine technology Computer applications Shipboard loading instruments First Edition

ISO ISO ISO ISO ISO ISO

16156 16160 16162 16163 16165 16172

ISO ISO

16183 16185

ISO

16200-1

ISO ISO

16200-2 16201

ISO ISO ISO ISO

16220 AMD 1 16220 16221 16232-1

ISO

16232-2

ISO

16232-3

ISO

16232-4

ISO

16232-5

ISO

16232-6

ISO

16232-7

ISO

16232-8

ISO ISO

16232-9 16232-10

Machine-tools safety Safety requirements for the design and construction of work holding chucks First Edition Continuously hot-rolled steel sheet products Dimensional and shape tolerances Second Edition Continuously cold-rolled steel sheet products Dimensional and shape tolerances Second Edition Continuously hot-dipped coated steel sheet products Dimensional and shape tolerances Second Edition Ships and Marine Technology - Marine Environment Protection - Terminology Relating to Oil Spill Response First Edition Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe First Edition Heavy-duty engines Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions First Edition Road Vehicles - Engine Families for Certification of Heavy-Duty Vehicles - Exhaust Emissions First Edition Workplace air quality Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography Part 1: Pumped sampling method First Edition Workplace Air Quality - Sampling and Analysis of Voltage Organic Compounds by Solvent Desorption/Gas Chromatography - Part 2: Diffusive Sampling Method First Edition Technical aids for persons with disability Environmental control systems for daily living First Edition Magnesium and magnesium alloys ù Magnesium alloy ingots and castings AMENDMENT 1: Additional alloys Second Edition Magnesium and magnesium alloys Magnesium alloy ingots and castings Second Edition Water Quality - Guidance for Determination of Biodegradability in the Marine Environment First Edition Road vehicles ù Cleanliness of components of fluid circuits ù Part 1: Vocabulary First Edition Road vehicles ù Cleanliness of components of fluid circuits ù Part 2: Method of extraction of contaminants by agitation First Edition Road vehicles ù Cleanliness of components of fluid circuits ù Part 3: Method of extraction of contaminants by pressure rinsing First Edition Road vehicles ù Cleanliness of components of fluid circuits ù Part 4: Method of extraction of contaminants by ultrasonic techniques First Edition Road vehicles ù Cleanliness of components of fluid circuits ù Part 5: Method of extraction of contaminants on functional test bench First Edition Road vehicles - anliness of components of fluid circuits - t 6: Particle mass determination by gravimetric analysis FIRST EDITION Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis FIRST EDITION Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis FIRST EDITION Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter FIRST EDITION Road vehicles ù Cleanliness of components of fluid circuits ù Part 10: Expression of results First Edition

Heavy commercial vehicles and buses Straight-ahead braking on surfaces with split coefficient of friction Open-loop test method First Edition

ISO

16234

ISO

16240

ISO ISO ISO ISO ISO ISO

16241 16246 16247 16262 16264 16266

ISO ISO ISO

16269-6 16269-7 16269-8

ISO

16273

ISO

16276-1

ISO ISO ISO ISO

16276-2 16284 16287 16305

ISO

16312-1

Water quality Determination of the genotoxicity of water and waste water Salmonella/microsome test (Ames test) First edition Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) First Edition Road vehicles M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing First Edition Road vehicles Detection of exhaust system leaks Helium test method and detection device specification First Edition Information Technology - ECMAScript Language Specification Second Edition Water Quality - Determination of Soluble Silicates by Flow Analysis (FIA and CFA) and Photometric Detection First Edition Water quality Detection and enumeration of Pseudomonas aeruginosa Method by membrane filtration First Edition Statistical interpretation of data Part 6: Determination of statistical tolerance intervals First edition; Cancels and Replaces ISO 3207:1975 Statistical Interpretation of Data - Part 7: Median - Estimation and Confidence Intervals First Edition Statistical interpretation of data Part 8: Determination of prediction intervals First Edition Ships and marine technology Night vision equipment for high-speed craft Operational and performance requirements, methods of testing and required test results First Edition Corrosion protection of steel structures by protective paint systems ù Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating ù Part 1: Pull-off testing First Edition Corrosion protection of steel structures by protective paint systems ù Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating ù Part 2: Cross-cut testing and X-cut testing First Edition Ophthalmic optics Information interchange for ophthalmic optical equipment Second Edition Plain bearings Thermoplastic bushes Dimensions and tolerances First Edition Butter Determination of firmness First Edition Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria First Edition;: 2004 [Replaced: ISO TS 16312-1]

ISO ISO ISO ISO ISO ISO ISO ISO

16322-1 16322-2 16322-3 16328 16329 16330 16333 16348

Textiles Determination of spirality after laundering Part 1: Percentage of wale spirality change in knitted garments First Edition Textiles Determination of spirality after laundering Part 2: Woven and knitted fabrics First Edition Textiles Determination of spirality after laundering Part 3: Woven and knitted garments First Edition Ships and marine technology Gyro-compasses for high-speed craft First Edition Ships and Marine Technology - Heading Control Systems for High-Speed Craft First Edition Reciprocating positive displacement pumps and pump units Technical requirements First Edition Heavy commercial vehicles and buses Steady-state rollover threshold Tilt-table test method First Edition Metallic and other inorganic coatings Definitions and conventions concerning appearance First Edition

ISO ISO ISO ISO ISO ISO

16362 16366 16367 16368 16369 16382

ISO ISO ISO ISO ISO

16387 16391 16408 16409 16412

ISO ISO

16422 16426

ISO

16428

ISO

16429

ISO ISO ISO

16432 16433 16434

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

16446 16448 16449 16458 16462 16463 16467 16468 16472 16484-2 16484-3

Ambient air Determination of particlephase polycyclic aromatic hydrocarbons by high performance liquid chromatography First Edition Tools for Pressing - L-Shaped Guides First Edition Tools for Pressing - Guide Plates - U- and V-Blocks First Edition Mobile elevating work platforms Design calculations, safety requirements and test methods First Edition Elevating Work Platforms - Mast-Climbing Work Platforms First Edition Information Technology - Data Interchange on 12,7 mm 208-Track Magnetic Tape Cartridges - DLT 6 Format First Edition Soil quality Effects of pollutants on Enchytraeidae (Enchytraeus sp.) Determination of effects on reproduction and survival First Edition Aids for Ostomy and Incontinence - Irrigation Sets - Requirements and Test Methods First Edition Dentistry Oral hygiene products Oral rinses Dentistry Oral hygiene products Manual interdental brushes First Edition Air cargo equipment Air cargo pallets Utilization guidelines First edition Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure Specifications First Edition Fasteners Quality assurance system First Edition Implants for surgery Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices First edition Implants for surgery Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods First Editon Resistance welding Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) First Edition Resistance welding Procedure for seam welding of uncoated and coated low carbon steels First Edition Earthquake- and Subsidence-Resistant Design of Ductile Iron Pipelines First Edition Ships and Marine Technology - Marine Environmental Protection - Adaptor for Joining Dissimilar Boom Connectors First Edition Information Technology - 120 mm DVD - Read-Only Disk Second Edition Information Technology - 80 mm DVD - Read-Only Disk Second Edition Space systems Unmanned spacecraft transportation General requirements First Edition Cubic boron nitride inserts, tipped or solid Dimensions, types First Edition Polycrystalline diamond inserts, tipped Dimensions, types First Edition Packaging Transport packages for dangerous goods Test methods for IBCs Investment castings (steel, nickel alloys and cobalt alloys) General technical requirements First Edition Animal feeding stuffs Determination of amylase-treated neutral detergent fibre content (aNDF) First Edition Building automation and control systems (BACS) Part 2: Hardware First Edition Building automation and control systems (BACS) Part 3: Functions First Edition

ISO ISO ISO

16484-5 16484-6 16485

Building automation and control systems ù Part 5: Data communication protocol Second Edition Building automation and control systems (BACS) Part 6: Data communication conformance testing First Edition Information Technology - Mixed Raster Content (MRC) First Edition

ISO

16500-1

ISO ISO

16500-2 16500-3

Information Technology - Generic Digital Audio-Visual Systems - Part 1: System Reference Models and Scenarios First Edition Information Technology - Generic Digital Audio-Visual Systems - Part 2: System Dynamics, Scenarios and Protocol Requirements First Edition Information Technology - Generic Digital Audio-Visual Systems - Part 3: Contours: Technology Domain First Edition

ISO ISO ISO ISO

16500-4 16500-5 16500-6 16500-7

Information Technology - Generic Digital Audio-Visual Systems - Part 4: Lower-Layer Protocols and Physical Interfaces First Edition Information Technology - Generic Digital Audio-Visual Systems - Part 5: High and Mid-Layer Protocols First Edition Information Technology - Generic Digital Audio-Visual Systems- Part 6: Information Presentation First Edition Information Technology - Generic Digital Audio-Visual Systems - Part 7: Basic Security Tools First Edition

ISO ISO

16500-8 16500-9

ISO ISO ISO ISO ISO

16508 16509 16512-1 16513 16528-1

ISO ISO ISO

16528-2 16532-2 16549

ISO

16564 AMD 1

ISO

16564

ISO ISO ISO ISO ISO

16565 16582 16583 16584 16585

Information Technology - Generic Digital Audio-Visual Systems - Part 8: Management Architecture and Protocols First Edition Information Technology - Generic Digital Audio-Visual Systems - Part 9: Usage Information Protocols First Edition Road Traffic Lights - Photometric Properties of 200 mm Roundel Signals First Edition; CIE S 006.1/E; Corrected and Reprinted: 1115-2000 Information Technology - Year 2000 Terminology First Edition; IEEE Std 2000.1 Information technology Relayed Multicast Control Protocol (RMCP) Part 1: Framework First Edition Information technology Group management protocol First Edition Boilers and pressure vessels ù Part 1: Performance requirements First edition [Superseded: ISO TS 16528] Boilers and pressure vessels ù Part 2: Procedures for fulfilling the requirements of ISO 16528-1 First Edition [Superseded: ISO TS 16528] Paper and board ù Determination of grease resistance ù Part 2: Surface repellency test First Edition Textiles Unevenness of textile strands Capacitance method First Edition; Replaces ISO 2649 Rubber, raw natural ù Determination of average molecular mass and molecularmass distribution by size exclusion chromatography (SEC) AMENDMENT 1 First Edition Rubber, raw natural ù Determination of average molecular mass and molecularmass distribution by size exclusion chromatography (SEC) First Edition Rubber - Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers First Edition Open End Blind Rivets with Break Pull Mandrel and Protruding Head - Cu/SST First Edition Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Cu/St or Cu/Br or Cu/SSt First Edition Open End Blind Rivets with Break Pull Mandrel and Protruding Head - NiCu/St OR NiCu/SSt First Edition Closed End Blind Rivets with Pull Mandrel and Protruding Head - A2/SSt First Edition

ISO ISO ISO ISO

16586 16587 16588 AMD 1 16588

ISO

16589-1

Soil Quality - Determination of Soil Water Content as a Volume Fraction on the Basis of Known Dry Bulk Density - Gravimetric Method First Edition Mechanical vibration and shock Performance parameters for condition monitoring of structures First Edition Water quality ù Determination of six complexing agents ù Gas-chromatographic method AMENDMENT 1 First Edition Water quality Determination of six complexing agents Gas-chromatographic method First Edition Rotary Shaft Lip-Type Seals Incorporating Thermoplastic Sealing Elements - Part 1: Nominal Dimensions and Tolerances First Edition

ISO

16589-2

Rotary Shaft Lip-Type Seals Incorporating Thermoplastic Sealing Elements - Part 2: Vocabulary Bagues D┤Etancheite a Levres Pour Arbres Tournants Incorporant Des Elements D┤Etancheite Thermoplastiques - Partie 2: Vocabulaire First Edition

ISO

16589-3

Rotary Shaft Lip-Type Seals Incorporating Thermoplastic Sealing Elements - Part 3: Storage, Handling and Installation First Edition

ISO

16589-4

Rotary Shaft Lip-Type Seals Incorporating Thermoplastic Sealing Elements - Part 4: Performance Test Procedures First Edition

ISO ISO

16589-5 16590

ISO

16592

ISO

16603

ISO

16604

ISO ISO ISO ISO ISO

16609 16612-1 16622 16632 16642

ISO

16649-1

Rotary Shaft Lip-Type Seals Incorporating Thermoplastic Sealing Elements - Part 5: Identification of Visual Imperfections First Edition Water Quality - Determination of Mercury - Methods Involving Enrichment by Amalgamation First Edition Microbeam analysis Electron probe microanalysis Guidelines for determining the carbon content of steels using a calibration curve method First Edition Clothing for protection against contact with blood and body fluids Determination of the resistance of protective clothing materials to penetration by blood and body fluids Test method using synthetic blood First Edition Clothing for protection against contact with blood and body fluids Determination of resistance of protective clothing materials to penetration by blood-borne pathogens Test method using Phi-X174 bacteriophage First Edition Banking Requirements for message authentication using symmetric techniques First Edition; Replaces ISO 8730:1990, ISO 87311:1987, ISO 8731-2:1992 and ISO 9807:1991 Graphic technology Variable printing data exchange Part 1: Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005) First Edition Meteorology - Sonic Anemometers/Thermometers - Acceptance Test Methods for Mean Wind Measurements First Edition Tobacco and Tobacco Products - Determination of Water Content - Gas-Chromatographic Method First Edition Computer Applications in Terminology - Terminological Markup Framework First Edition Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of B-Glucuronidase-Positive Escherichia Coli - Part 1: Colony-Count Technique at 44 Degrees C Using Membranes and 5-Bromo-4-Chloro-3-Indolyl B-D-Glucuronide First Edition

ISO ISO

16649-2 16650

Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of B-Glucuronidase-Positive Escherichia Coli - Part 2: Colony-Count Technique at 44 Degrees C Using 5-Bromo-4-Chloro-3-Indolyl B-D-Glucuronide First Edition Bead wire First Edition

ISO

16654

ISO ISO ISO

16656 16657 16663-1

ISO ISO ISO ISO ISO ISO ISO

16663-2 CORR 1 16663-2 16664 16665 16670 16671 16672

ISO ISO

16673 16700

ISO

16701

ISO ISO ISO ISO ISO ISO ISO ISO ISO

16702 16703 16708 16712 16720 16734 16735 16736 16737

ISO ISO

16740 16750-1

Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Detection of Escherichia Coli O157 First Edition Hydraulic fluid power Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) Mounting dimensions First Edition Sensory analysis Apparatus Olive oil tasting glass First Edition Fishing Nets - Method of Test for the Determination of Mesh Size - Part 1: Opening of Mesh First Edition Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh TECHNICAL CORRIGENDUM 1 First edition Fishing Nets - Method of Test for the Determination of Mesh Size - Part 2: Length of Mesh First Edition Gas analysis Handling of calibration gases and gas mixtures Guidelines First Edition Water quality Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna First Edition Timber structures Joints made with mechanical fasteners Quasi-static reversed-cyclic test method First Edition Ophthalmic implants Irrigating solutions for ophthalmic surgery First Edition Ophthalmic Implants - Ocular Endotamponades First Edition Road vehicles ù Ergonomic aspects of transport information and control systems ù Occlusion method to assess visual demand due to the use of invehicle systems First edition Microbeam analysis Scanning electron microscopy Guidelines for calibrating image magnification First Edition Corrosion of metals and alloys Corrosion in artificial atmosphere Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution First Edition Workplace Air Quality - Determination of Total Isocyanate Groups in Air Using 2-(1-Methoxyphenyl) Piperazine and Liquid Chromatography First Edition Soil quality Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography First Edition Petroleum and natural gas industries Pipeline transportation systems Reliability-based limit state methods First edition Water quality Determination of acute toxicity of marine or estuarine sediment to amphipods First Edition Soil quality Pretreatment of samples by freeze-drying for subsequent analysis First edition Fire safety engineering Requirements governing algebraic equations Fire plumes First Edition Fire safety engineering Requirements governing algebraic equations Smoke layers First Edition Fire safety engineering Requirements governing algebraic equations Ceiling jet flows First Edition Fire safety engineering Requirements governing algebraic equations Vent flows First Edition Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide First Edition Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General Second Edition

ISO

16750-2

Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 2: Electrical loads Second Edition

ISO

16750-3

Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 3: Mechanical loads First Edition

ISO

16750-4

Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 4: Climatic loads Second Edition

ISO ISO

16750-5 16770

ISO

16772

ISO

16773-1

ISO

16773-2

ISO

16784-1

ISO ISO ISO

16784-2 16790 16792

Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 5: Chemical loads First Edition Plastics Determination of environmental stress cracking (ESC) of polyethylene Full-notch creep test (FNCT) First Edition Soil quality Determination of mercury in aqua regia soil extracts with coldvapour atomic spectrometry or coldvapour atomic fluorescence spectrometry First Edition Paints and varnishes ù Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens ù Part 1: Terms and definitions First Edition Paints and varnishes ù Electrochemical impedance spectroscopy (EIS) on highimpedance coated specimens ù Part 2: Collection of data First Edition Corrosion of metals and alloys Corrosion and fouling in industrial cooling water systems Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems First Edition Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig First Edition Plastics Determination of drawing characteristics of thermoplastics in the molten state First Edition Technical product documentation Digital product definition data practices First Edition

ISO

16793

Nuclear fuel technology Guide for ceramographic preparation of UO2 sintered pellets for microstructure examination First Edition

ISO ISO

16794 16795

ISO

16796

Nuclear Energy - Determination of Carbon Compounds and Fluorides in Uranium Hexafluoride Infrared Spectrometry First Edition Nuclear energy Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry First Edition Nuclear energy Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES) First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

16797 16798 16805 16812 16813 16820 16824 16825 16832 16833

Nuclear energy Soxhlet-mode chemical durability test Application to vitrified matrixes for high-level radioactive waste First Edition Links of Grade 8 for use with slings First Edition Binders for paints and varnishes Determination of glass transition temperature First Edition Petroleum, petrochemical and natural gas industries ù Shell-and-tube heat exchangers Second Edition Building environment design Indoor environment General principles First Edition Sensory analysis Methodology Sequential analysis First Edition Information Technology - 120 mm DVD Rewritable Disk (DVD-RAM) First Edition Information Technology - Case for 120 mm DVD-RAM Disks First Edition Acoustics Loudness scaling by means of categories First Edition Road vehicles Wheels Measurement of radial and lateral run-out First Edition

ISO

16834

ISO

16840-1

ISO

16840-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

16840-3 16844-1 16844-2 16844-3 CORR 1 16844-3 16844-4 16844-5 16844-6 16844-7 16845 16850 16851 16853

ISO ISO ISO ISO

16854 16860 16862 16869

ISO ISO ISO ISO

16871 16873 AMD 1 16873 16874

ISO ISO ISO

16875 16881-1 16883

ISO

16889

Welding consumables Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels Classification First Edition Wheelchair seating Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces First Edition Wheelchair seating - Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity Seat cushions First Edition Wheelchair seating Part 3: Determination of static, impact and repetitive load strengths for postural support devices First Edition Road Vehicles - Tachograph Systems - Part 1: Electrical Connectors First Edition; Corrigendum 1: 1/15/2005 Road vehicles Tachograph systems Part 2: Recording unit, electrical interface First Edition Road vehicles ù Tachograph system ù Part 3: Motion sensor interface TECHNICAL CORRIGENDUM 1 First Edition Road vehicles ù Tachograph systems ù Part 3: Motion sensor interface First Edition Road vehicles Tachograph systems Part 4: CAN interface First Edition Road vehicles Tachograph systems Part 5: Secured CAN interface First Edition Road vehicles Tachograph systems Part 6: Diagnostics First Edition Road vehicles Tachograph systems Part 7: Parameters First Edition Road vehicles - Controller area network (CAN) - Conformance test plan First Edition Road vehicles ù Pedestrian protection ù Child head impact test method First Edition Textile conveyor belts Determination of the net length of an endless (spliced) conveyor belt First Edition Textile machinery Sliver cans, rectangular Main dimensions and tolerances First Edition Textile machinery Ring twisting machines Vocabulary MatÚriel pour l'industrie textile Machines Ó retordre Ó anneaux Vocabulaire First Edition Hydraulic fluid power Filters Test method for differential pressure devices First Edition Paints and varnishes Evaluation of sag resistance First Edition Plastics - Assessment of the Effectiveness of Fungistatic Compounds in Plastics Formulations First Edition Plastics piping and ducting systems Plastics pipes and fittings Method for exposure to direct (natural) weathering First Edition Hydraulic fluid power ù Pressure switches ù Mounting surfaces AMENDMENT 1 First Edition Hydraulic fluid power ù Pressure switches ù Mounting surfaces First Edition Hydraulic fluid power Identification of manifold assemblies and their components First Edition Textile machinery Ring spinning machines for cotton spinning Vocabulary MatÚriel pour l'industrie textile Machines de filature Ó anneaux pour le coton Vocabulaire First Edition Cranes Design calculation for rail wheels and associated trolley track supporting structure Part 1: General First edition Packaging ù Transport packages for dangerous goods ù Test methods for large packagings First Edition Hydraulic Fluid Power Filters - Multi-Pass Method for Evaluating Filtration Performance of a Filter Element First Edition; Replaces ISO 4572: 1981; Supersedes (NFPA) T3.10.8.18

ISO ISO ISO

16902-1 16915 16916

ISO

16929

ISO ISO ISO ISO ISO ISO

16931 16932 16933 16934 16935 16936-1

ISO ISO

16936-2 16936-3

ISO

16936-4

ISO

16962

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

16969 16978 16979 16981 16983 16984 16985 16987 16992 16998 16999

ISO

17000

ISO

17011

Hydraulic fluid power Test code for the determination of sound power levels using sound intensity techniques: Engineering method Part 1: Pumps First Edition Tools for moulding Sprue pullers First Edition Tools for moulding Tool specification sheet for injection moulds First Edition Plastics Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilotscale test First edition Animal and Vegetable Fats and Oils - Determination of Polymerized Triglycerides Content by High-Performance Size-Exclusion Chromatography (HPSEC) First Edition Glass in building - Destructive-windstorm-resistant security glazing - Test and classification First Edition Glass in building ù Explosion-resistant security glazing ù Test and classification for arena air-blast loading First edition Glass in building - Explosion-resistant security glazing - Test and classification by shock-tube loading First Edition Glass in building ù Bullet-resistant security glazing ù Test and classification First edition Glass in building Forced-entry security glazing Part 1: Test and classification by repetitive ball drop First Edition Glass in building Forced-entry security glazing Part 2: Test and classification by repetitive impact of a hammer and axe at room temperature First Edition Glass in building Forced-entry security glazing Part 3: Test and classification by manual attack First Edition Glass in building Forced-entry security glazing Part 4: Test and classification by pendulum impact under thermally and fire stressed conditions First Edition Surface chemical analysis Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge opticalemission spectrometry First Edition Information Technology - Data Interchange on 120 mm Optical Disk Cartridges Using +RW Format - Capacity: 3,0 Gbytes and 6,0 Gbytes First Edition Wood-based panels Determination of modulus of elasticity in bending and of bending strength First Edition Wood-based panels Determination of moisture content First Edition Wood-based panels Determination of surface soundness First Edition Wood-based panels Determination of swelling in thickness after immersion in water First Edition Wood-based panels Determination of tensile strength perpendicular to the plane of the panel First Edition Wood-based panels Determination of dimensional changes associated with changes in relative humidity First Edition Wood-Based Panels - Determination of Moisture Resistance Under Cyclic Test Conditions First Edition Passenger car tyres Spare unit substitutive equipment (SUSE) First Edition Wood-based panels Determination of moisture resistance Boil test First Edition Wood-based panels Sampling and cutting of test pieces First Edition Conformity assessment Vocabulary and general principles ╔valuation de la conformitÚ - Vocabulaire et principes gÚnÚraux First Edition Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies First Edition; Corrected Version 2/15/2005; Replaces ISO Guide 58:1993, ISO Guide 61:1996, ISO TR 17010:1998

ISO

17020

ISO ISO

17021 17024

ISO ISO ISO

17025 CORR 1 17025 17030

ISO

17040

ISO

17050-1

ISO

17050-2

ISO ISO ISO ISO

17052 17053 17057 17058

ISO

17059

ISO ISO ISO ISO ISO

17063 17064 17070 17071 17074

ISO ISO

17076 17078-1

ISO

17080

ISO ISO

17081 17082

General Criteria for the Operation of Various Types of Bodies Performing Inspection First Edition [Superseded: ISO GUIDE 39] Conformity assessment Requirements for bodies providing audit and certification of management systems First Edition; Replaces ISO/IEC Guide 62:1996 and ISO/IEC Guide 66:1999 Conformity Assessment - General Requirements for Bodies Operating Certification of Persons First Edition General requirements for the competence of testing and calibration laboratories TECHNICAL CORRIGENDUM 1 Second edition General requirements for the competence of testing and calibration laboratories Second edition Conformity assessment General requirements for third-party marks of conformity First Edition Conformity assessment General requirements for peer assessment of conformity assessment bodies and accreditation bodies First Edition Conformity assessment Supplier┤s declaration of conformity Part 1: General requirements First Edition; Replaces ISO Guide 22: 1996 Conformity assessment Supplier's declaration of conformity Part 2: Supporting documentation First Edition; Replaces ISO Guide 22: 1996 Rubber, raw ù Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography ù Thermal desorption (dynamic headspace) method First Edition Steel and iron Determination of oxygen Infrared method after fusion under inert gas First Edition Aerospace - Rivets, Solid - Test Method First Edition Steel and iron Determination of arsenic content Spectrophotometric method First Edition Oilseeds ù Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) First Edition Earth-moving machinery Braking systems of pedestrian-controlled machines Performance requirements and test procedures First Edition Wood-based panels Fibreboard, particleboard and oriented strand board (OSB) Vocabulary First Edition Leather Chemical tests Determination of pentachlorophenol content First Edition Leather Physical and mechanical tests Determination of fogging characteristics First Edition; IULTCS/IUP 46 Leather Physical and mechanical tests Determination of resistance to horizontal spread of flame First Edition Leather Physical and mechanical tests Determination of abrasion resistance of automotive leather First Edition; IULTCS/IUP 48 Petroleum and natural gas industries Drilling and production equipment Part 1: Side-pocket mandrels First Edition Manually portable agricultural and forestry machines and powered lawn and garden equipment Design principles for single-panel product safety labels First Edition Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique First Edition Pneumatic fluid power Valves Data to be included in supplier literature First Edition

ISO

17087

ISO ISO ISO ISO ISO

17092 17101 17103 17115 17120

ISO

17121

ISO

17123-1

ISO

17123-2

ISO

17123-3

ISO

17123-4

ISO

17123-5

ISO

17123-6

ISO

17123-7

ISO

17123-8

ISO

17126

ISO ISO

17129 17155

ISO ISO ISO

17166 17186 17189

ISO

17190-1

Specifications for adhesives used for finger joints in non-structural lumber products First Edition Fine ceramics [advanced ceramics, advanced technical ceramics] - Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions First Edition Agricultural machinery Rotary and flail mowers Thrown-object test and acceptance criteria First Edition Agricultural Machinery - Rotary and Flail Mowers - Test Methods and Acceptance Criteria for Protective Skirts First Edition Health informatics ù Vocabulary for terminological systems First Edition Health informatics Country identifier standards First Edition Cinematography - Work Stations Used for Film and Video Production - Requirements for Visual and Audio Conditions First Edition; Technical Corrigendum 1: 04-15-2001 Optics and Optical Instruments - Field Procedures for Testing Geodetic and Surveying Instruments - Part 1: Theory First Edition Optics and Optical Instruments - Field Procedures for Testing Geodetic and Surveying Instruments - Part 2: Levels First Edition; Replaces ISO 8322-3 and ISO 12857-1 Optics and Optical Instruments - Field Procedures for Testing Geodetic and Surveying Instruments - Part 3: Theodolites First Edition; Replaces ISO 8322-4:1991 and 12857-2:1997 Optics and Optical Instruments - Field Procedures for Testing Geodetic and Surveying Instruments - Part 4: Electro-Optical Distance Meters (EDM Instruments) First Edition; Replaces ISO 8322-8:1992 and 12857-3:1997 Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 5: Electronic tacheometers First Edition Optics and Optical Instruments - Field Procedures for Testing Geodetic and Surveying Instruments - Part 6: Rotating Lasers First Edition Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 7: Optical plumbing instruments First Edition; Cancels and Replaces ISO 8322-5:1991 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 8: GNSS field measurement systems in real-time kinematic (RTK) First Edition Soil quality Determination of the effects of pollutants on soil flora Screening test for emergence of lettuce seedlings (Lactuca sativa L.) First Edition Milk powder Determination of soy and pea proteins using capillary electrophoresis in the presence of sodium dodecyl sulfate (SDSCE) Screening method First Edition; Same as IDF 206 Soil quality Determination of abundance and activity of soil microflora using respiration curves First edition Erythema Reference Action Spectrum and Standard Erythema Dose First Edition; CIE S 007/E; Corrected and Reprinted: 11-15-2000 Leather Physical and mechanical tests Determination of surface coating thickness First Edition; IULTCS/IUP 41 Butter, edible oil emulsions and spreadable fats Determination of fat content (Reference method) First Edition Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 1: Determination of pH First Edition

ISO

17190-2

ISO

17190-3

ISO

17190-4

ISO

17190-5

ISO

17190-6

ISO

17190-7

ISO

17190-8

ISO

17190-9

ISO

17190-10

ISO

17190-11

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

17191 17201-1 17201-2 17201-4 17202 17212 17227 17228 17229 17230 17231 17232

ISO ISO

17233 17235

Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 2: Determination of Amount of Residual Monomers First Edition Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 3: Determination of Particle Size Distribution by Sieve Fractionation First Edition Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 4: Determination of Moisture Content by Mass Loss Upon Heating First Edition Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 5: Gravimetric Determination of Free Swell Capacity in Saline Solution First Edition Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 6: Gravimetric Determination of Fluid Retention Capacity in Saline Soultion After Centrifugation First Edition Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 7: Gravimetric Determination of Absorption under Pressure First Edition Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 8: Gravimetric Determination of Flowrate First Edition Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 9: Gravimetric Determination of Density First Edition; Technical Corrigendum 1: 10/15/2002 Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 10: Gravimetric Determination of Extractable Polymer Content by Potentiometric Titration First Edition Urine-Absorbing Aids for Incontinence - Test Methods for Characterizing Polymer-Based Absorbent Materials - Part 11: Determination of EContent of Respirable Particles First Edition Urine-absorbing aids for incontinence Measurement of airborne respirable polyacrylate superabsorbent materials Determination of dust in collection cassettes by sodium atomic absorption spectrometry First Edition Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement First Edition Acoustics Noise from shooting ranges Part 2: Estimation of muzzle blast and projectile sound by calculation First Edition Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound First Edition Textiles Determination of twist in single spun yarns Untwist/retwist method First edition Structural adhesives Guidelines for the surface preparation of metals and plastics prior to adhesive bonding First Edition Leather Physical and mechanical tests Determination of dry heat resistance of leather First Edition; IULTCS/IUP 35 Leather Tests for colour fastness Change in colour with accelerated ageing First Edition Leather Physical and mechanical tests Determination of water vapour absorption First Edition; IULTCS/IUP 42 Leather Physical and mechanical tests Determination of water penetration pressure First Edition; IULTCS/IUP 45 Leather Physical and mechanical tests Determination of water repellency of garment leather First Edition; IULTCS/IUP 37 Leather Physical and mechanical tests Determination of heat resistance of patent leather First Edition; IULTCS/IUP 38 Leather Physical and mechanical tests Determination of cold crack temperature of surface coatings First Edition; IULTCS/IUP 29 Leather Physical and mechanical tests Determination of softness First Edition; IULTCS/IUP 36

ISO

17236

Leather Physical and mechanical tests Determination of extension set First Edition; IULTCS/IUP 43 Fruits, vegetables and derived products Determination of arsenic content Method using hydride generation atomic absorption spectrometry First Edition Fruit and vegetable products Determination of tin content Method using flame atomic absorption spectrometry First Edition Coal ù Proximate analysis TECHNICAL CORRIGENDUM 1 First Edition Coal ù Proximate analysis First edition Coal ù Ultimate analysis TECHNICAL CORRIGENDUM 1 First Edition Coal ù Ultimate analysis First edition Safety footwear with resistance to chain saw cutting AMENDMENT 1 First Edition Safety footwear with resistance to chain saw cutting First Edition Cinematography Multichannel Analogue and Digital Photographic Sound and Control Records on 35 mm Motion-Picture Prints and Negatives, and Digital Sound-Control Records on 70 mm Motion-Picture Prints and Negatives Position and Width Dimensions First Edition Compressed hydrogen surface vehicle refuelling connection devices First Edition Passenger Car Tyres - Methods for Measuring Rolling Circumference - Loaded New Tyres First Edition Plastics Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s) First Edition Plastics Guide to the acquisition and presentation of design data First Edition Road Vehicles - Ergonomic Aspects of Transport Information and Control Systems - Procedure for Assessing Suitability for Use While Driving First Edition Passenger Cars - Free-Steer Behaviour - Part 1: Steering-Release Open-Loop Test Method First Edition Passenger cars Free-steer behaviour Part 2: Steering-pulse open-loop test method First Edition Metal ball valves for petroleum, petrochemical and allied industries First Edition

ISO ISO ISO ISO ISO ISO ISO ISO

17239 17240 17246 CORR 1 17246 17247 CORR 1 17247 17249 AMD 1 17249

ISO ISO ISO ISO ISO

17266 17268 17269 17281 17282

ISO ISO ISO ISO

17287 17288-1 17288-2 17292

ISO

17294-1

ISO

17294-2

ISO

17309

Water quality Application of inductively coupled plasma mass spectrometry (ICP-MS) Part 1: General guidelines First Edition Water quality Application of inductively coupled plasma mass spectrometry (ICP-MS) Part 2: Determination of 62 elements First Edition Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Mapping Functions for the Employment of a Circuit Mode Basic Service and the Supplementary Service User-to-User Signalling as a Pair of On-Demand Inter-PINX Connections First Edition

ISO

17310

Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Mapping Functions for the Employment of 64 kbit/s Circuit Mode Connections with 16 kbit/s Sub-Multiplexing First Edition

ISO

17311

Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Mapping Functions for the Employment of 64 kbit/s Circuit Mode Connections with 8 kbit/s Sub-Multiplexing First Edition

ISO

17312

Soil quality Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter First Edition

ISO

17313

ISO

17321-1

ISO

17331

ISO ISO

17332 17339

ISO

17341

ISO

17342

ISO

17344

ISO ISO ISO ISO

17345 17346 17353 17355

ISO

17356-1

ISO

17356-2

Soil quality Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter First Edition Graphic technology and photography Colour characterisation of digital still cameras (DSCs) Part 1: Stimuli, metrology and test procedures Surface chemical analysis Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy First Edition Cinematography - Manufacturer-Printed Latent Image Identification Information for 35 mm Motion-Picture Colour-Print Film Specifications First Edition Ships and Marine Technology - Sea Anchors for Survival Craft and Rescue Boats First Edition Information technology Data Interchange on 120 mm and 80 mm Optical Disk using +RW Format Capacity: 4,7 Gbytes and 1,46 Gbytes per Side (Recording speed up to 4X) Third Edition Information technology 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD re-recordable disk (DVD-RW) First Edition Information technology Data Interchange on 120 mm and 80 mm Optical Disk using +R Format Capacity: 4,7 and 1,46 Gbytes per Side (Recording speed up to 16X) Third Edition Information technology Data Interchange on 130 mm Rewritable and Write Once Read Many Ultra Density Optical (UDO) Disk Cartridges Capacity: 30 Gbytes per Cartridge First Generation Second Edition Information technology Data interchange on 90 mm optical disk cartridges Capacity: 1,3 Gbytes per cartridge First Edition Water quality Determination of selected organotin compounds Gas chromatographic method First Edition Space data and information transfer systems ù CCSDS file delivery protocol Third edition Road vehicles Open interface for embedded automotive applications Part 1: General structure and terms, definitions and abbreviated terms First Edition Road vehicles Open interface for embedded automotive applications Part 2: OSEK/VDX specifications for binding OS, COM and NM First Edition

ISO

17356-3

Road vehicles Open interface for embedded automotive applications Part 3: OSEK/VDX Operating System (OS) First Edition

ISO

17356-4

Road vehicles Open interface for embedded automotive applications Part 4: OSEK/VDX Communication (COM) First Edition

ISO

17356-5

ISO ISO ISO

17356-6 17357 17359

Road vehicles Open interface for embedded automotive applications Part 5: OSEK/VDX Network Management (NM) First Edition Road vehicles Open interface for embedded automotive applications Part 6: OSEK/VDX Implementation Language (OIL) First Edition Ships and marine technology High-pressure floating pneumatic rubber fenders First Edition Condition monitoring and diagnostics of machines General guidelines First Edition

ISO ISO

17361 17363

ISO ISO ISO ISO ISO

17373 17375 17380 17381 17382

ISO ISO ISO ISO

17386 17398 17399 17401

ISO ISO ISO ISO

17410 17422 17432 17433

ISO

17454

ISO ISO ISO

17455 CORR 1 17455 17456

ISO

17462

ISO

17470

ISO

17475 CORR 1

ISO

17475

ISO ISO

17484-1 17485

Intelligent transport systems ù Lane departure warning systems ù Performance requirements and test procedures First Edition Supply chain applications of RFID ù Freight containers First edition Road vehicles Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact First Edition Animal feeding stuffs Determination of aflatoxin B1 First Edition Soil quality Determination of total cyanide and easily released cyanide Continuous-flow analysis method First Edition Water quality Selection and application of ready-to-use test kit methods in water analysis First Edition Oil of magnolia flower, China type (Michelia Î alba DC) First Edition Transport information and control systems Manoeuvring Aids for Low Speed Operation (MALSO) Performance requirements and test procedures First Edition Safety colours and safety signs Classification, performance and durability of safety signs First Edition Space systems Man-systems integration First Edition Space systems Spacecraft interface requirements document for launch vehicle services First Edition Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Psychrotrophic Microorganisms First Edition Plastics - Environmental Aspects - General Guidelines for Their Inclusion in Standards First Edition Health informatics Messages and communication Web access to DICOM persistent objects First Edition Space data and information transfer systems - Packet telemetry services Second Edition Plastics Piping Systems Multilayer Pipes Test Method for the Adhesion of the Different Layers Using a Pulling Rig First Edition Plastics piping systems ù Multilayer pipes ù Determination of the oxygen permeability of the barrier pipe TECHNICAL CORRIGENDUM 1 First Edition Plastics piping systems Multilayer pipes Determination of the oxygen permeability of the barrier pipe First Edition Plastics piping systems Multilayer pipes Determination of long-term strength First Edition Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DDS-4 Format First Edition Microbeam analysis Electron probe microanalysis Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry First Edition Corrosion of metals and alloys ù Electrochemical test methods ù Guidelines for conducting potentiostatic and potentiodynamic polarization measurements TECHNICAL CORRIGENDUM 1 First Edition Corrosion of metals and alloys ù Electrochemical test methods ù Guidelines for conducting potentiostatic and potentiodynamic polarization measurements First Edition Plastics piping systems Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Part 1: Specifications for systems First Edition Bevel gears ISO system of accuracy First Edition

ISO

17491

ISO

17492 CORR 1

ISO

17492

ISO

17493

ISO

17494

ISO

17495

ISO

17497-1

ISO ISO ISO ISO ISO

17499 17500 17504 17510-1 17510-2

ISO ISO ISO

17511 17514 17526

ISO ISO

17531 17532

ISO ISO ISO

17544 17554 17555

ISO ISO

17556 17557

ISO

17558

Protective Clothing - Protection Against Gaseous and Liquid Chemicals - Determination of Resistance of Protective Clothing to Penetration by Liquids and Gases First Edition Clothing for protection against heat and flame ù Determination of heat transmission on exposure to both flame and radiant heat TECHNICAL CORRIGENDUM 1 First Edition Clothing for protection against heat and flame ù Determination of heat transmission on exposure to both flame and radiant heat First Edition Clothing and Equipment for Protection Against Heat - Test Method for Convective Heat Resistance Using a Hot Air Circulating Oven First Edition Aromatic Extracts, Flavouring and Perfuming Compounds - Determination of Ethanol Content - Gas Chromatographic Method on Packed and Capillary Columns First Edition Water quality Determination of selected nitrophenols Method by solid-phase extraction and gas chromatography with mass spectrometric detection First Edition Acoustics Sound-scattering properties of surfaces Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room First Edition Carbonaceous materials used in the production of aluminium Determination of baking level expressed by equivalent temperature First Edition Aluminium oxide used for the production of primary aluminium Determination of attrition index First Edition Textile Floor Coverings - Determination of Wool Fibre Integrity Using an Abrasion Machine First Edition Sleep apnoea breathing therapy ù Part 1: Sleep apnoea breathing therapy equipment Second Edition Sleep apnoea breathing therapy ù Part 2: Masks and application accessories Second Edition In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials First edition Time-measuring instruments Photoluminescent deposits Test methods and requirements First Edition Optics and optical instruments Lasers and laser-related equipment Lifetime of lasers First Edition Photography - Processing Chemicals - Specification for 4-(N-ethyl-N-2-Methanesulfonylaminoethyl)-2-Methylphenylenediamine Sesquisulfate Monohydrate First Edition; Corrected Version 6/15/2003 Stationary equipment for agriculture ù Data communications network for livestock farming First Edition Carbonaceous materials used in the production of aluminium Cold and tepid ramming pastes Determination of rammability of unbaked pastes First Edition Reaction to fire tests - Mass loss measurement First Edition Plastics Film and sheeting Biaxially oriented polypropylene (PP) films First Edition Plastics Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved First Edition Plastics Film and sheeting Cast polypropylene (PP) films First Edition Steel wire ropes Socketing procedures Molten metal and resin socketing First Edition; Supersedes ISO 7595: 1984 and ISO/TR 7596: 1982

ISO ISO

17559 17560

ISO

17561

ISO ISO

17562 17564

ISO ISO ISO ISO

17565 17567 17577 17584

ISO

17591

ISO

17592

ISO ISO ISO

17593 17594 17604

ISO ISO ISO ISO ISO ISO

17612 17613-1 17615 17624 17631 CORR 1 17631

ISO

17632

ISO

17633

ISO ISO ISO

17634 17635 17636

Hydraulic fluid power Electrically controlled hydraulic pumps Test methods to determine performance characteristics First Edition Surface Chemical Analysis - Secondary-ion Mass Spectrometry - Method for Depth Profiling of Boron in Silicon First Edition Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Elastic Moduli of Monolithic Ceramics at Room Temperature by Sonic Resonance First Edition Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Linear Thermal Expansion of Monolithic Ceramics by Push-Rod Technique First Edition Nitrile Rubber - Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for flexural strength of monolithic ceramics at elevated temperature First Edition Agricultural and forestry tractors and implements Hydraulic power beyond First edition Steel Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm First Edition Refrigerant properties First Edition Machinery for forestry Knuckleboom log loaders Identification terminology, classification and component nomenclature First edition; Supercedes J2055 Information technology 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD rewritable disk (DVD-RAM) First Edition Clinical laboratory testing and in vitro medical devices ù Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy First edition Information technology Cases for 120 mm and 80 mm DVD-RAM disks First Edition Microbiology of Food and Animal Feeding Stuffs - Carcass Sampling for Microbiological Analysis First Edition Tractors and machinery for agriculture and forestry Auxiliary-power transmission connector for the operator station First Edition Manually operated pumps for drinking water Selection and acceptance Part 1: Southeast Asia First Edition Aluminium and aluminium alloys ù Alloyed ingots for remelting ù Specifications First Edition Acoustics Guidelines for noise control in offices and workrooms by means of acoustical screens First Edition Ships and marine technology ù Shipboard plans for fire protection, life-saving appliances and means of escape First Edition Ships and marine technology ù Shipboard plans for fire protection, life-saving appliances and means of escape First Edition Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification First edition Welding consumables Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels Classification First Edition Welding consumables Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels Classification First Edition Non-destructive testing of welds General rules for fusion welds in metallic materials First edition Non-destructive testing of welds Radiographic testing of fusionwelded joints First Edition

ISO ISO ISO ISO

17637 17638 17639 17640

ISO

17641-1

ISO

17641-2

ISO

17642-1

ISO

17642-2

ISO ISO ISO

17642-3 17643 17652-1

ISO ISO

17652-2 17652-3

Non-destructive testing of welds Visual testing of fusion-welded joints First Edition Non-destructive testing of welds Magnetic particle testing First Edition Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds First edition Non-destructive testing of welds Ultrasonic testing of welded joints First Edition Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 1: General First Edition Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 2: Self-restraint tests First Edition Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 1: General First Edition Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 2: Self-restraint tests First Edition Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 3: Externally loaded tests First Edition Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis First Edition Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 1: General Requirements First Edition Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 2: Welding Properties of Shop Primers First Edition Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 3: Thermal Cutting First Edition

ISO ISO

17652-4 17653

Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 4: Emission of Fumes and Gases First Edition Destructive Test on Welds in Metallic Materials - Torsion Test of Resistance Spot Welds First Edition

ISO ISO ISO

17654 17655 17657-1

ISO ISO ISO

17657-2 17657-3 17657-4

ISO

17657-5

ISO

17658

ISO

17659

Destructive Tests on Welds in Metallic Materials - Resistance Welding - Pressure Test on Resistance Seam Welds First Edition Destructive Tests on Welds in Metallic Materials - Method for Taking Samples for Delta Ferrite Measurement First Edition Resistance welding Welding current measurement for resistance welding Part 1: Guidelines for measurement First Edition Resistance welding Welding current measurement for resistance welding Part 2: Welding current meter with current sensing coil First Edition Resistance welding Welding current measurement for resistance welding Part 3: Current sensing coil First Edition Resistance welding Welding current measurement for resistance welding Part 4: Calibration system First Edition Resistance welding Welding current measurement for resistance welding Part 5: Verification of welding current measuring system First Edition Welding - Imperfections in Oxyfuel Flame Cuts, Laser Beam Cuts and Plasma Cuts - Terminology Soudage - Defauts Des Coupes Executees Par Oxycoupage, Coupage Laser Et Coupage Plasma - Terminologie First Edition Welding - Multilingual Terms for Welded Joints with Illustrations Soudage - Liste Multilingue De Termes Relatifs Aux Assemblages Et Aux Joints Soudes, Avec Illustrations First Edition

ISO ISO ISO

17660-1 17660-2 17662

ISO

17664

Welding Welding of reinforcing steel Part 1: Load-bearing welded joints First Edition Welding Welding of reinforcing steel Part 2: Non load-bearing welded joints First Edition Welding Calibration, verification and validation of equipment used for welding, including ancillary activities First Edition Sterilization of medical devices Information to be provided by the manufacturer for the processing of resterilizable medical devices First Edition

ISO ISO

17665-1 17666

Sterilization of health care products Moist heat Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices First Edition; Replaces ISO 11134: 1994 and ISO 13683: 1997 [Superseded: ISO 17665-1] Space Systems - Risk Management First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

17687 17693 17694 17695 17696 17697 17698 17699 17700 17701 17702 17703 17704 17705 17706 17707 17708 17709

Transport Information and Control Systems (TICS) ù General fleet management and commercial freight operations ù Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation First Edition Footwear Test methods for uppers Resistance to damage on lasting First Edition Footwear Test methods for uppers and lining Flex resistance First Edition Footwear Test methods for uppers Deformability First Edition Footwear Test methods for uppers, linings and insocks Tear strength First Edition Footwear Test methods for uppers, lining and insocks Seam strength First Edition Footwear Test methods for uppers Delamination resistance First Edition Footwear Test methods for uppers and lining Water vapour permeability and absorption First Edition Footwear Test methods for uppers, linings and insocks Colour fastness to rubbing First Edition Footwear Test methods for uppers, lining and insocks Colour migration First Edition Footwear Test methods for uppers Water resistance First Edition Footwear Test methods for uppers High temperature behaviour First Edition Footwear Test methods for uppers, linings and insocks Abrasion resistance First Edition Footwear Test methods for uppers, lining and insocks Thermal insulation First Edition Footwear Test methods for uppers Tensile strength and elongation First Edition Footwear Test methods for outsoles Flex resistance First Edition Footwear Test methods for whole shoe Upper sole adhesion First Edition Footwear Sampling location, preparation and duration of conditioning of samples and test pieces First Edition

ISO ISO

17710 17713-1

ISO ISO

17714 17724

Plastics - Polyols for use in the Production of Polyurethane - Determination of Degree of Unsaturation by Microtitration First Edition Meteorology ù Wind measurements ù Part 1: Wind tunnel test methods for rotating anemometer performance First Edition Meteorology ù Air temperature measurements ù Test methods for comparing the performance of thermometer shields/screens and defining important characteristics FIRST EDITION Graphical symbols Vocabulary First edition

ISO

17733

ISO

17734-1

ISO

17734-2

ISO ISO ISO

17744 17771 17775

ISO

17776

ISO

17792

ISO ISO ISO ISO ISO

17799 CORR 1 17799 17804 17834 17836

ISO ISO

17846 17852

ISO ISO ISO

17853 CORR 1 17853 17864

ISO ISO ISO ISO ISO

17873 17874-1 17874-2 17874-4 17874-5

ISO

17875

Workplace air Determination of mercury and inorganic mercury compounds Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry First Edition Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Part 1: Isocyanates using dibutylamine derivatives First Edition Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives First Edition Plastics Determination of specific volume as a function of temperature and pressure (pvT diagram) Piston apparatus method First Edition Plastics Thermoset moulding compounds Determination of the degree of fibre wetting in SMC First Edition Aircraft Ground-service connections Potable water, toilet-flush water and toilet drain First Edition Petroleum and Natural Gas Industries - Offshore Production Installations - Guidelines on Tools and Techniques for Hazard Identification and Risk Assessment First Edition Milk, milk products and mesophilic starter cultures Enumeration of citratefermenting lactic acid bacteria Colonycount technique at 25 ░C First Edition Information technology ù Security techniques ù Code of practice for information security management Second Edition; This Corrigendum Renumbers this Document to ISO 27002 with No New Replacement Hardcopy Information technology Security techniques Code of practice for information security management Second Edition Founding - Ausferritic spheroidal graphite cast irons - Classification First Edition Thermal spraying Coatings for protection against corrosion and oxidation at elevated temperatures First Edition Thermal spraying Determination of the deposition efficiency for thermal spraying First Edition Welding and allied processes Health and safety Wordless precautionary labels for equipment and consumables used in arc welding and cutting First Edition Water quality Determination of mercury Method using atomic fluorescence spectrometry First Edition Wear of implant materials ù Polymer and metal wear particles ù Isolation, characterization and quantification TECHNICAL CORRIGENDUM 1 First Edition Wear of implant materials ù Polymer and metal wear particles ù Isolation, characterization and quantification First Edition Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control First Edition Nuclear facilities Criteria for the design and operation of ventilation systems for nuclear installations other than nuclear reactors First Edition Remote-handling devices for radioactive materials Part 1: General requirements First Edition Remote-handling devices for radioactive materials Part 2: Mechanical master-slave manipulators First Edition Remote handling devices for radioactive materials Part 4: Power manipulators First Edition Remote handling devices for radioactive materials ù Part 5: Remote handling tongs First Edition Information Technology - Telecommunications and Information between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Private User Mobility (PUM) - Registration Supplementary Service First Edition

ISO

17876

ISO

17877

ISO ISO ISO

17878 17884 17893

ISO

17894

ISO ISO

17895 17899

ISO

17900

ISO

17913

ISO ISO ISO

17925 17932 17933

ISO

17973

ISO

17974

ISO ISO ISO ISO ISO

17993 17994 17995 17997-1 17997-2

Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Private User Mobility (PUM) - Registration Supplementary Service Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Private User Mobility (PUM) - Call Handling Additional Network Features First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Service Network Inter-Exchange Signalling Protocol - Private User Mobility (PUM) - Call Handling Additional Network Features Second Edition Ships and marine technology Searchlights for high-speed craft First Edition Steel wire ropes Vocabulary, designation and classification First Edition Ships and marine technology Computer applications General principles for the development and use of programmable electronic systems in marine applications First edition Paints and varnishes Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) First Edition Ships and marine technology Marine electric window wipers First Edition Agricultural Trailers - Balanced and Semi-Mounted Trailers - Determination of Payload, Vertical Static Load and Axle Load First Edition Information Technology - 12,7 mm 128-Track Magnetic Tape Cartridge for Information Interchange - Parallel Serpentine Format First Edition Zinc and/or aluminium based coatings on steel Determination of coating mass per unit area and chemical composition Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry First Edition Animal and vegetable fats and oils Determination of the deterioration of bleachability index (DOBI) First Edition GEDI - Generic Electronic Document Interchange First Edition Surface Chemical Analysis - Medium-Resolution Auger Electron Spectrometers - Calibration of Energy Scales for Elemental Analysis First Edition Surface Chemical Analysis - High-Resolution Auger Electron Spectrometers - Calibration of Energy Scales for Elemental and Chemical-State Analysis First Edition Water Quality - Determination of 15 Polycyclic Aromatic Hydrocarbons (PAH) in Water by HPLC with Fluorescence Detection After Liquid-Liquid Extraction First Edition Water quality Criteria for establishing equivalence between microbiological methods First Edition Water quality Detection and enumeration of thermotolerant Campylobacter species First Edition Milk Determination of casein-nitrogen content Part 1: Indirect method (Reference method) First Edition; IDF 29-1 Milk Determination of casein-nitrogen content Part 2: Direct method First Edition; IDF 29-2

ISO

18000-1

ISO

18000-2

ISO

18000-3

ISO

18000-4

ISO

18000-6 AMD 1

ISO

18000-6

ISO

18000-7

ISO ISO ISO ISO ISO

18004 18009 18010 AMD 1 18010 18012-1

ISO ISO

18013-1 18014-1

ISO

18014-2

ISO

18014-3

ISO

18017

ISO ISO ISO

18021 18028-1 18028-2

ISO

18028-3

Information technology Radio frequency identification for item management parameters to be standardized First Edition Information technology Radio frequency identification for item management below 135 kHz First Edition Information technology Radio frequency identification for item management 13,56 MHz First Edition Information technology Radio frequency identification for item management 2,45 GHz First Edition

Part 1: Reference architecture and definition of Part 2: Parameters for air interface communications Part 3: Parameters for air interface communications at Part 4: Parameters for air interface communications at

Information technology ù Radio frequency identification for item management ù Part 6: Parameters for air interface communications at 860 MHz to 960 MHz AMENDMENT 1: Extension with Type C and update of Types A and B First Edition Information technology ù Radio frequency identification for item management ù Part 6: Parameters for air interface communications at 860 MHz to 960 MHz First Edition Information technology Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz First Edition Information technology Automatic identification and data capture techniques QR Code 2005 bar code symbology specification Second Edition Information Technology - Programming Languages - Ada: Conformity Assessment of a Language Processor First Edition Information technology - Pathways and spaces for customer premises cabling Amendment 1 First Edition Information technology - Pathways and spaces for customer premises cabling First Edition Information technology Home Electronic System Guidelines for product interoperability Part 1: Introduction First Edition Information technology - Personal identification - ISO-compliant driving licence - Part 1: Physical characteristics and basic data set First Edition Information Technology - Security Techniques - Time-stamping Services - Part 1: Framework First Edition Information technology Security techniques Time-stamping services Part 2: Mechanisms producing independent tokens First Edition Information technology Security techniques Time-stamping services Part 3: Mechanisms producing linked tokens First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Mapping Functions for the Employment of Virtual Private Network Scenarios First Edition Information Technology - User Interfaces for Mobile Tools for Management of Database Communications in a Client-Server Model First Edition Information technology Security techniques IT network security Part 1: Network security management First Edition Information technology Security techniques » IT network security Part 2: Network security architecture First Edition Information technology Security techniques IT network security Part 3: Securing communications between networks using security gateways First Edition

ISO

18028-4

ISO ISO ISO ISO ISO

18028-5 18031 18032 18033-1 18033-2

ISO

18033-3 CORR 2

ISO ISO ISO ISO ISO

18033-3 CORR 1 18033-3 18033-4 18035 18036

ISO ISO

18043 18045

ISO

18046

ISO ISO

18046-3 18050

ISO

18051

ISO

DIS 18051

ISO

18052

ISO

18054

ISO

18055-1

ISO

18056

Information technology Security techniques IT network security Part 4: Securing remote access First edition Information technology Security techniques IT network security Part 5: Securing communications across networks using virtual private networks First Edition Information technology Security techniques Random bit generation First Edition Information technology Security techniques Prime number generation First Edition Information technology Security techniques Encryption algorithms Part 1: General First Edition Information technology Security techniques Encryption algorithms Part 2: Asymmetric ciphers First Edition Information technology ù Security techniques ù Encryption algorithms ù Part 3: Block ciphers TECHNICAL CORRIGENDUM 2 First Edition Information technology ù Security techniques ù Encryption algorithms ù Part 3: Block ciphers TECHNICAL CORRIGENDUM 1 First Edition Information technology ù Security techniques ù Encryption algorithms ù Part 3: Block ciphers First Edition Information technology - Security techniques - Encryption algorithms - Part 4: Stream ciphers First Edition Information Technology - Icon Symbols and Functions for Controlling Multimedia Software Applications First Edition Information technology Icon symbols and functions for World Wide Web browser toolbars First Edition Information technology Security techniques Selection, deployment and operations of intrusion detection systems First Edition Information technology Security techniques Methodology for IT security evaluation First Edition Information technology Automatic identification and data capture techniques Radio frequency identification device performance test methods First Edition;:2005 Information technology ù Radio frequency identification device performance test methods ù Part 3: Test methods for tag performance First Edition Information technology Office equipment Print quality attributes for machine readable Digital Postage Marks First Edition Information technology Telecommunications and information exchange between systems Services for Computer Supported Telecommunications Applications (CSTA) Phase III Third Edition Information technology ù Telecommunications and information exchange between systems ù Services for Computer Supported Telecommunications Applications (CSTA) Phase III Information Technology - Telecommunications and Information Exchange between Systems - Protocol for Computer Supported Telecommunications Applications (CSTA) Phase III First Edition Oils of orris rhizome (Iris pallida Lam. or Iris germanica L.) Determination of irone content Method using gas chromatography on a capillary column First Edition Photography and imaging Inkjet media: Classification, nomenclature and dimensions Part 1: Photo-grade media (paper and film) First Edition Information technology Telecommunications and information exchange between systems XML Protocol for Computer-Supported Telecommunications Applications (CSTA) Phase III Second Edition

ISO ISO

DIS 18056 18064

ISO ISO

18073 18084

ISO

18092

ISO ISO

18093 18104

ISO ISO ISO

18114 18115 18116

ISO

18118

ISO

18132-1

ISO

18144

ISO

18145

ISO

18153

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

18164 18172-1 18172-2 18185-1 18185-2 18185-3 18185-4 18185-5 18207 18232

Information technology ù Telecommunications and information exchange between systems ù XML protocol for Computer Supported Telecommunications Applications (CSTA) Phase III Thermoplastic elastomers Nomenclature and abbreviated terms First Edition Water quality Determination of tetra- to octa-chlorinated dioxins and furans Method using isotope dilution HRGC/HRMS First Edition Press tools for tablets Punches and dies First edition Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol (NFCIP-1) First Edition Informational Technology - Data Interchange on 130 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity: 5,2 Gbytes per Cartridge First Edition Health informatics Integration of a reference terminology model for nursing First Edition Surface Chemical Analysis - Secondary-Ion Mass Spectrometry - Determination of Relative Sensitivity Factors from Ion-Implanted Reference Materials First Edition Surface Chemical Analysis - Vocabulary First Edition; Amendment 1: 01/15/2006 Surface chemical analysis Guidelines for preparation and mounting of specimens for analysis First Edition Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials First Edition Refrigerated light hydrocarbon fluids General requirements for automatic level gauges Part 1: Gauges onboard ships carrying liquefied gases First Edition Environmental tobacco smoke Estimation of its contribution to respirable suspended particles Method based on solanesol First Edition Environmental tobacco smoke Determination of vapour phase nicotine and 3-ethenylpyridine in air Gas-chromatographic method First Edition In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological aceability of values for catalytic concentration of enzymes assigned to calibrators and control materials First Edition Passenger car, truck, bus and motorcycle tyres Methods of measuring rolling resistance First Edition; Replaces ISO 8767, ISO 9948 and ISO 13327 Gas cylinders ù Refillable welded stainless steel cylinders ù Part 1: Test pressure 6 MPa and below First Edition Gas cylinders ù Refillable welded stainless steel cylinders ù Part 2: Test pressure greater than 6 MPa Freight containers ù Electronic seals ù Part 1: Communication protocol First Edition Freight containers ù Electronic seals ù Part 2: Application requirements First edition Freight containers Electronic seals Part 3: Environmental characteristics First Edition Freight containers ù Electronic seals ù Part 4: Data protection First Edition Freight containers ù Electronic seals ù Part 5: Physical layer First Edition Road vehicles Trailers up to 3,5 t Control of welded towing brackets for coupling ball after fatigue testing First Edition Health Informatics Messages and communication Format of length limited globally unique string identifiers First Edition

ISO ISO

18233 18245

Acoustics Application of new measurement methods in building and room acoustics First Edition Retail Financial Services - Merchant Category Codes First Edition

ISO ISO

18252 18265

Anhydrous milk fat Determination of sterol composition by gas liquid chromatography (Routine method) First Edition; IDF 200 Metallic materials Conversion of hardness values First Edition

ISO

18273

ISO

18274 CORR 2

ISO

18274 CORR 1

ISO

18274

ISO ISO

18275 CORR 1 18275

ISO

18276

ISO

18278-1

Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification First edition Welding consumables ù Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys ù Classification TECHNICAL CORRIGENDUM 2 First Edition Welding consumables ù Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys ù Classification ù TECHNICAL CORRIGENDUM 1 First Edition Welding consumables ù Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys ù Classification First Edition Welding consumables ù Covered electrodes for manual metal arc welding of high-strength steels ù Classification TECHNICAL CORRIGENDUM 1 First Edition Welding consumables Covered electrodes for manual metal arc welding of high-strength steels Classification First Edition Welding consumables Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels Classification First Edition Resistance welding Weldability Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials First Edition

ISO ISO ISO ISO ISO

18278-2 18279 18280 18283 18286

ISO

18287

ISO

18329

ISO ISO ISO

18330 18333 18334

Resistance welding Weldability Part 2: Alternative procedures for the assessment of sheet steels for spot welding First Edition Brazing Imperfections in brazed joints First Edition Plastics Epoxy resins Test methods First Edition Hard coal and coke Manual sampling First Edition Hot-rolled stainless steel plates Tolerances on dimensions and shape First Edition Soil quality Determination of polycyclic aromatic hydrocarbons (PAH) Gas chromatographic method with mass spectrometric detection (GC-MS) First Edition Milk and milk products Determination of furosine content Ion-pair reversephase high-performance liquid chromatography method First Edition Milk and milk products Guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues First Edition; IDF 188 Pallets for materials handling Quality of new wooden components for flat pallets First Edition Pallets for Materials Handling - Quality of Assembly of New, Wooden, Flat Pallets First Edition

ISO

18369-1

ISO

18369-2

ISO

18369-3

ISO ISO

18369-4 18372

ISO

18373-1

ISO ISO

18395 18412

ISO

18413

ISO ISO ISO ISO

18414 18415 18416 18431-1

ISO ISO

18431-2 18431-4

ISO

18436-1 CORR 1

ISO

18436-1

ISO

18436-2

ISO

18437-2

ISO

18437-3

Ophthalmic optics Contact lenses Part 1: Vocabulary, classification system and recommendations for labelling specifications First Edition; Replaces ISO 8320-1:2003, ISO 8320-2:2001, and ISO 11539:1999; Together with ISO 18369-2 replaces ISO ISO 83211:2002 and ISO 8321-2:2000 Ophthalmic optics Contact lenses Part 2: Tolerances First Edition; Together with ISO 18369-1:2006 replaces ISO ISO 8321-1:2002 and ISO 8321-2:2000 Ophthalmic optics Contact lenses Part 3: Measurement methods First Edition; Replaces ISO 8599:1994, ISO 9337-1:1999, ISO 93372:2004, ISO 9338:1996, ISO 9339-1:1996, ISO 9339-2:1998, ISO 9341:1996, ISO 10338:1996 and ISO 10344:1996 Ophthalmic optics Contact lenses Part 4: Physicochemical properties of contact lens materials First Edition; Replaces ISO 99131:1996, ISO 9913-2:2000, ISO 9914:1995, ISO 10339:1997, ISO 10340:1995 and ISO 11984:1999 Information technology RapidIO interconnect specification First Edition Rigid PVC pipes ù Differential scanning calorimetry (DSC) method ù Part 1: Measurement of the processing temperature First Edition Animal and vegetable fats and oils Determination of monoacylglycerols, diacylglycerols, triacylglycerols and glycerol by highperformance sizeexclusion chromatography (HPSEC) First Edition Water quality Determination of chromium(VI) Photometric method for weakly contaminated water First edition Hydraulic Fluid Power - Cleanliness of Parts and Components - Inspection Document and Principles Related to Contaminant Collection, Analysis and Data Reporting First Edition Acceptance sampling procedures by attributes Accept-zero sampling system based on credit principle for controlling outgoing quality First Edition Cosmetics ù Microbiology ù Detection of specified and non-specified microorganisms First Edition Cosmetics ù Microbiology ù Detection of Candida albicans First Edition Mechanical vibration and shock - Signal processing Part 1: General introduction First Edition Mechanical vibration and shock Signal processing Part 2: Time domain windows for Fourier Transform analysis First Edition Mechanical vibration and shock ù Signal processing ù Part 4: Shock-response spectrum analysis First Edition Condition monitoring and diagnostics of machines ù Requirements for training and certification of personnel ù Part 1: Requirements for certifying bodies and the certification process TECHNICAL CORRIGENDUM 1 First Edition Condition monitoring and diagnostics of machines ù Requirements for training and certification of personnel ù Part 1: Requirements for certifying bodies and the certification process First Edition Condition monitoring and diagnostics of machines - Requirements for Training and Certification of Personnel - Part 2: Vibration Condition Monitoring and Diagnostics First Edition Mechanical vibration and shock Characterization of the dynamic mechanical properties of visco-elastic materials Part 2: Resonance method First Edition Mechanical vibration and shock Characterization of the dynamic mechanical properties of visco-elastic materials Part 3: Cantilever shear beam method First Edition

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer First Edition Natural gas Correlation between water content and water dew point First Edition Footwear - Standard Atmospheres for Conditioning and Testing of Footwear and Components for Footwear First Edition Sterilization of health care products Biological and chemical indicators Test equipment First Edition Soil quality ù Guidance on long and short term storage of soil samples First Edition Tourism services Hotels and other types of tourism accommodation Terminology Services touristiques H¶tels et autres types dÆhÚbergements touristiques Terminologie First Edition Carbonaceous materials for the production of aluminium ù Cathode blocks and baked anodes ù Determination of compressive strength First Edition Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Determination of lateral resolution First Edition Rubber, vulcanized or thermoplastic Hardness testing Introduction and guide First Edition Method for the Assessment of the Degree of Pigment or Carbon Black Dispersion in Polyolefin Pipes, Fittings and Compounds First Edition; Replaces ISO 11420 and ISO 13949 Conveyor belts Test atmospheres and conditioning periods First Edition Measurement of radioactivity in the environment Soil Part 1: General guidelines and definitions First edition Microbiology of food and animal feeding stuffs Horizontal methods for sampling techniques from surfaces using contact plates and swabs First Edition Resistance spot-, projection- and seamwelding ù Method for determining the transition resistance on aluminium and steel material First Edition Resistance Welding - Spot Welding Of Aluminium And Aluminium Alloys - Weldability, Welding And Testing First Edition Repair of flat wooden pallets First Edition

ISO ISO ISO ISO ISO

18452 18453 18454 18472 18512

ISO

18513

ISO

18515

ISO ISO

18516 18517

ISO ISO ISO

18553 18573 18589-1

ISO

18593

ISO ISO ISO

18594 18595 18613

ISO ISO ISO

18629-1 18629-11 18629-12

Industrial automation systems and integration Process specification language Part 1: Overview and basic principles First Edition Industrial automation systems and integration - Process specification language - Part 11: PSL core First Edition Industrial automation systems and integration - Process specification language - Part 12: Outer core First Edition

ISO ISO

18629-13 18629-14

ISO

18629-41

ISO

18629-42

ISO

18629-43

Industrial automation systems and integration Industrial automation systems and integration Industrial automation systems and integration First Edition Industrial automation systems and integration extensions First Edition Industrial automation systems and integration duration extensions First Edition

Process specification language Part 13: Duration and ordering theories First Edition Process specification language Part 14: Resource theories First Edition Process specification language Part 41: Definitional extension: Activity extensions Process specification language Part 42: Definitional extension: Temporal and state Process specification language Part 43: Definitional extension: Activity ordering and

ISO ISO

18629-44 18649

Industrial automation systems and integration Process specification language Part 44: Definitional extension: Resource extensions First Edition Mechanical vibration Evaluation of measurement results from dynamic tests and investigations on bridges First Edition

ISO

18650-1

Building construction machinery and equipment Concrete mixers Part 1: Vocabulary and general specifications First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO

18650-2 18652 18653 18669-1 18669-2 18692 18696 18738 18749

ISO

18752

ISO

18753

Building construction machinery and equipment Concrete mixers Part 2: Procedure for examination of mixing efficiency First Edition Building construction machinery and equipment External vibrators for concrete First Edition Gears Evaluation of instruments for the measurement of individual gears First Edition Internal combustion engines Piston pins Part 1: General specifications First Edition Internal combustion engines Piston pins Part 2: Inspection measuring principles First Edition Fibre ropes for offshore stationkeeping ù Polyester First Edition Textiles Determination of resistance to water absorption Tumble-jar absorption test First Edition Lifts (elevators) Measurement of lift ride quality First Edition Water quality Adsorption of substances on activated sludge Batch test using specific analytical methods First Edition Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of absolute density of ceramic powders by pyknometer First Edition

ISO

18754

ISO

18755

ISO

18756

ISO ISO ISO ISO ISO

18757 18770 18777 18778 18779

ISO

18809

ISO ISO

18810 18812

Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of density and apparent porosity First edition Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of thermal diffusivity of monolithic ceramics by laser flash method First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of specific surface area of ceramic powders by gas adsorption using the BET method First Edition Ships and marine technology Machinery-space flammable oil systems Prevention of leakage of flammable oil First Edition Transportable liquid oxygen systems for medical use Particular requirements First Edition Respiratory equipment Infant monitors Particular requirements First Edition Medical devices for conserving oxygen and oxygen mixtures Particular requirements First Edition Information Technology - 8mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording AIT-1 with MIC Format First Edition Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording AIT-2 with Mic Format First Edition Health Informatics - Clinical Analyser Interfaces to Laboratory Information Systems - Use Profiles First Edition

ISO

18813

ISO

18836

ISO ISO

18852 18856

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

18857-1 18872 18878 18893 18894 18895 18896 18898 18899 18901

ISO ISO ISO ISO ISO ISO ISO

18902 18903 18904 18905 18906 18907 18908

ISO ISO ISO ISO ISO ISO

18909 CORR 1 18909 18910 18911 18912 18913

ISO

18914

ISO

18915

Ships and marine technology Survival equipment for survival craft and rescue boats First Edition Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - Mammoth Tape-2 Format First Edition Rubber compounding ingredients Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA) First edition Water quality Determination of selected phthalates using gas chromatography/mass spectrometry First Edition Water quality Determination of selected alkylphenols Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection First Edition Plastics ù Determination of tensile properties at high strain rates First Edition Mobile elevating work platforms Operator (driver) training First Edition Mobile elevating work platforms Safety principles, inspection, maintenance and operation First Edition Coke Determination of coke reactivity index (CRI) and coke strength after reaction (CSR) First Edition Footwear Test methods for shanks Fatigue resistance First Edition Footwear Test methods for shanks Longitudinal stiffness First Edition Rubber Calibration and verification of hardness testers First Edition Rubber Guide to the calibration of test equipment First Edition Imaging Materials - Processed Silver-Gelatin Type Black-and-White Films - Specifications for Stability First Edition Imaging Materials - Processed Photographic Films, Plates and Paper - Filing Enclosures and Storage Containers First Edition Imaging Materials Films and Paper Determination of Dimensional Change First Edition; Replaces ISO 6221 Imaging Materials - Processed Films - Method for Determining Lubrication First Edition Imaging Materials - Ammonia-Processed Diazo Photographic Film - Specifications for Stability First Edition Imaging Materials - Photographic Films - Specificzations for Safety Film First Edition; Supersedes ISO 543:1990 Imaging Materials - Photographic Films and Papers - Wedge Test for Brittleness First Edition Imaging Materials - Photographic Film - Determination of Folding Endurance First Edition Photography ù Processed photographic colour films and paper prints ù Methods for measuring image stability TECHNICAL CORRIGENDUM 1 First Edition Photography ù Processed photographic colour films and paper prints ù Methods for measuring image stability First Edition Imaging Materials - Photographic Film and Paper - Determination of Curl First Edition Imaging Materials - Processed Safety Photographic Films - Storage Practices First Edition Imaging Materials - Processed Vesicular Photographic Film - Specifications for Stability First Edition Imaging materials Permanence Vocabulary First Edition Imaging Materials - Photographic Film and Papers - Method for Determining the Resistance of Photographic Emulsions to Wet Abrasion First Edition Imaging Materials - Methods for the Evaluation of the Effectiveness of Chemical Conversion of Silver Images Against Oxidation First Edition; Replaces ISO 18915

ISO

18916

Imaging materials ù Processed imaging materials ù Photographic activity test for enclosure materials First Edition Photography - Determination of Residual Thiosulfate and Other Related Chemicals in Processed Photographic Materials - Methods Using Iodine-Amylose, Methylene Blue and Silver Sulfide First Edition; Cancels and Replaces ISO 417: 1993 Imaging Materials - Processed Photographic Plates - Storage Practices First Edition Imaging Materials - Thermally Processed Silver Microfilm - Specifications for Stability First Edition

ISO ISO ISO

18917 18918 18919

ISO

18920

ISO ISO ISO ISO ISO

18921 18922 18923 18924 18925

ISO

18926

ISO

18927

ISO

18928

ISO ISO ISO ISO

18929 18932 18933 18934

ISO

18935

ISO ISO ISO

19001 19003 19004

ISO

19005-1 CORR 1

Document management ù Electronic document file format for long-term preservation ù Part 1: Use of PDF 1.4 (PDF/A-1) First Edition

ISO

19005-1

ISO

19011

Document management - Electronic document file format for long-term preservation - Part 1: Use of PDF 1.4 (PDF/A-1) First Edition Guidelines for Quality and/or Environmental Management Systems Auditing First Edition; Replaces ISO 10011-1:1990, ISO 100112:1991, ISO 10011-3:1991, ISO 14010:1996, ISO 14011:1996, and ISO 14012:1996

Imaging Materials - Processed Photographic Reflection Prints - Storage Practices First Edition ; Replaces Fourth Edition of ISO 6051 Imaging Materials Compact Discs (CD-ROM) Method for Estimating the Life Expectancy Based on the Effects of Perature and Relative Humidity First Edition Imaging Materials - Processed Photographic Films - Methods for Determining Scratch Resistance First Edition Imaging Materials - Polyester - Base Magnetic Tape - Storage Practices First Edition Imaging Materials - Test Method for Arrhenius-Type Predictions First Edition Imaging Materials - Optical Disc Media - Storage Practices First Edition Imaging materials Information stored on magneto-optical (MO) discs Method for estimating the life expectancy based on the effects of temperature and relative humidity First Edition Imaging Materials - Recordable Compact Disc Systems - Method for Estimating the Life Expectanc Based on the Effects of Temperature and Relative Humidity First Edition Imaging Materials - Unprocessed Photographic Films and Papers - Storage Practices Second Edition; Cancels and Replaces 10331: 1991 Imaging materials Wet-processed silver-gelatin type black-and-white photographic reflection prints Specifications for dark storage First Edition Imaging materials Adhesive mounting systems Specifications First Edition Imaging materials Magnetic tape Care and handling practices for extended usage First Edition Imaging materials Multiple media archives Storage environment First Edition Imaging materials Colour images on paper prints Determination of indoor water resistance of printed colour images First Edition In Vitro Diagnostic Medical Devices - Information Supplied by the Manufacturer with in Vitro Diagnostic Reagents for Staining in Biology First Edition Rubber and rubber products Guidance on the application of statistics to physical testing First Edition Rubber and rubber products Determination of the sensitivity of test methods First Edition

ISO

19012-1

ISO

19013-1

ISO ISO ISO ISO

19013-2 19018 19019 19054

ISO

19058

ISO

19072-1

ISO

19072-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

19078 19092-1 19101 19105 19106 19107 19108 CORR 1 19108 19109 19110 19111 19112 19113 19114 CORR 1 19114 19115 CORR 1 19115 19116 19117 19118 19119

Optics and photonics ù Designation of microscope objectives ù Part 1: Flatness of field/Plan First Edition Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels First Edition; Together with ISO 19013-2 Replaces ISO 4639-1: 1987, ISO 4639-2: 1995, ISO 4639-3: 1995 Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels First Edition; Together with ISO 19013-1 Replaces ISO 4639-1: 1987, ISO 4639-2: 1995, ISO 4639-3: 1995 Ships and marine technology Terms, abbreviations, graphical symbols and concepts on navigation First Edition Sea-going vessels and marine technology Instructions for planning, carrying out and reporting sea trials First Edition Rail systems for supporting medical equipment First Edition Information Technology - Telecommunications and Information Exchange between Systems - Broadband Private Integrated Services Network - Inter-Exchange Signalling Protocol - Generic Functional Protocol First Edition Road vehicles ù Connection interface for pyrotechnic devices, two-way and three-way connections ù Part 1: Pocket interface definition First Edition Road vehicles ù Connection interface for pyrotechnic devices, two-way and three-way connections ù Part 2: Test methods and general performance requirements First edition Gas cylinders Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles First Edition Financial services Biometrics Part 1: Security framework First Edition Geographic Information - Reference Model First Edition Geographic Information - Conformance and Testing First Edition Geographic information Profiles First Edition Geographic information Spatial schema First Edition Geographic information ù Temporal schema First Edition Geographic information ù Temporal schema First Edition Geographic information Rules for application schema First Edition Geographic information Methodology for feature cataloguing First Edition Geographic Information - Spatial Referencing by Coordinates Second Edition Geographic information Spatial referencing by geographic identifiers First Edition Geographic information Quality principles First Edition Geographic information ù Quality evaluation procedures TECHNICAL CORRIGENDUM 1 First Edition Geographic information ù Quality evaluation procedures First Edition Geographic information ù Metadata TECHNICAL CORRIGENDUM 1 First Edition Geographic Information - Metadata First Edition Geographic information Positioning services First Edition Geographic information Portrayal First edition Geographic information Encoding First Edition Geographic information Services First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

19123 19125-1 19125-2 19128 19131 19133 19134 19135 19136 19137 19212 19219

ISO

19220

ISO

19232-1 CORR 1

ISO

19232-1

ISO

19232-2 CORR 1

ISO ISO

19232-2 19232-3

ISO

19232-4

ISO

19232-5

ISO ISO

19238 19258

ISO ISO

19318 19334

ISO ISO

19338 19353

Geographic information Schema for coverage geometry and functions First Edition Geographic information Simple feature access Part 1: Common architecture First Edition Geographic information Simple feature access Part 2: SQL option First Edition Geographic information - Web map server interface First Edition Geographic information ù Data product specifications First Edition Geographic information Locationbased services Tracking and navigation First Edition Geographic information ù Location-based services ù Multimodal routing and navigation First Edition Geographic information Procedures for item registration First Edition Geographic information ù Geography Markup Language (GML) First Edition Geographic information ù Core profile of the spatial schema First Edition Adhesives Determination of temperature dependence of shear strength First Edition Animal and Vegetable Fats and Oils - Determination of Visible Foots in Crude Fats and Oils First Edition Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Styrene copolymer blends (SAN + PVC) First Edition Non-destructive testing ù Image quality of radiographs ù Part 1: Image quality indicators (wire type) ù Determination of image quality value TECHNICAL CORRIGENDUM 1 First Edition Non-destructive testing Image quality of radiographs Part 1: Image quality indicators (wire type) Determination of image quality value First Edition Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value, TECHNICAL CORRIGENDUM 1 First Edition Non-destructive testing Image quality of radiographs Part 2: Image quality indicators (step/hole type) Determination of image quality value First Edition Non-destructive testing Image quality of radiographs Part 3: Image quality classes for ferrous metals First Edition Non-destructive testing Image quality of radiographs Part 4: Experimental evaluation of image quality values and image quality tables First Edition Non-destructive testing Image quality of radiographs Part 5: Image quality indicators (duplex wire type) Determination of image unsharpness value First Edition Radiation protection Performance criteria for service laboratories performing biological dosimetry by cytogenetics First Edition Soil quality Guidance on the determination of background values First Edition Surface chemical analysis X-ray photoelectron spectroscopy Reporting of methods used for charge control and charge correction First Edition Binders for paints and varnishes Gum rosin Gas-chromatographic analysis First Edition Performance and assessment requirements for design standards on structural concrete TECHNICAL CORRIGENDUM 1 Second edition Safety of machinery Fire prevention and protection First Edition

ISO ISO

19378 19379

ISO

19432

ISO ISO ISO ISO

19438 19439 CORR 1 19439 19458

ISO

19459

ISO

19460

ISO ISO ISO

19472 19493 19499

ISO ISO ISO ISO ISO ISO

19500-2 19501 19502 19503 19579 19701

ISO

19702

ISO ISO ISO ISO

19703 19706 19732 19739

ISO

19752

Lubricants, Industrial Oils and Related Products (Class L) - Machine-Tool Lubricants -0 Categories and Specifications First Edition; Replaces ISO TR 3498 and ISO TR 10481 Ships and marine technology ECS databases Content, quality, updating and testing First Edition Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements and testing First Edition Diesel fuel and petrol filters for internal combustion engines Filtration efficiency using particle counting and contaminant retention capacity First Edition; Corrected Version: 6/15/2004 Enterprise integration ù Framework for enterprise modelling TECHNICAL CORRIGENDUM 1 First Edition Enterprise integration ù Framework for enterprise modelling First Edition Water quality Sampling for microbiological analysis First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Single Step Call Transfer Supplementary Service First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Single Step Call Transfer Supplementary Service Second Edition Machinery for forestry Winches Dimensions, performance and safety First Edition; Corr 1: 11/1/2006; Replaces ISO 4254-4:1990, ISO 6816:1984 and ISO 6687:1994 Water quality ù Guidance on marine biological surveys of hard-substrate communities First Edition Mechanical vibration ù Balancing ù Guidance on the use and application of balancing standards First Edition Information Technology - Open Distributed Processing - Part 2: General Inter-ORB Protocol (GIOP)/Internet Inter-ORB Protocol (IIOP) First Edition Information technology Open Distributed Processing Unified Modeling Language (UML) Version 1.4.2 First edition Information technology Meta Object Facility (MOF) First Edition Information technology XML Metadata Interchange (XMI) First Edition Solid mineral fuels Determination of sulfur by IR spectrometry First Edition Methods for sampling and analysis of fire effluents First Edition; Replaces ISO TR 9122-3 Toxicity testing of fire effluents Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis First Edition Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires First edition Guidelines for assessing the fire threat to people First edition [Cancelled: ISO TS 19706] [Superseded: ISO TS 19706] Equipment for crop protection ù Sprayer filters ù Colour coding for identification First Edition Natural gas Determination of sulfur compounds using gas chromatography First Edition Information technology Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that may contain printer components First Edition

ISO

19757-2 AMD 1

ISO

19757-2

ISO

19757-3

ISO ISO

19757-4 19761

ISO

19762-1

ISO

19762-2

ISO ISO

19762-3 19763-1

ISO ISO ISO

19763-3 19770-1 19784-1

ISO

19784-1 FDAM 1

ISO ISO

19784-2 19785-1

ISO ISO ISO ISO ISO ISO ISO

19785-2 19790 19794-1 19794-2 19794-3 19794-4 19794-5

ISO ISO

19794-5 FDA 1 19794-6

Information technology ù Document Schema Definition Language (DSDL) ù Part 2: Regular-grammar-based validation ù RELAX NG AMENDMENT 1: Compact Syntax First Edition Information technology ù Document Schema Definition Language (DSDL) ù Part 2: Regular-grammar-based validation ù RELAX NG First Edition Information technology Document Schema Definition Languages (DSDL) Part 3: Rule-based validation Schematron First Edition Information technology Document Schema Definition Languages (DSDL) Part 4: Namespace-based Validation Dispatching Language (NVDL) First Edition Software Engineering - COSMIC-FFP - A Functional Size Measurement Method First Edition Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC First edition Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 2: Optically readable media (ORM) First edition Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 3: Radio frequency identification (RFID) First edition Information technology ù Metamodel framework for interoperability (MFI) ù Part 1: Reference model First edition Information technology Metamodel framework for interoperability (MFI) Part 3: Metamodel for ontology registration First Edition Information technology Software asset management Part 1: Processes First edition Information technology Biometric application programming interface Part 1: BioAPI specification First Edition Information technology ù Biometric application programming interface Part 1: BioAPI specification AMENDMENT 1: BioGUI specification Information technology ù Biometric application programming interface ù Part 2: Biometric archive function provider interface First Edition Information technology Common Biometric Exchange Formats Framework Part 1: Data element specification First Edition Information technology Common Biometric Exchange Formats Framework Part 2: Procedures for the operation of the Biometric Registration Authority First Edition Information technology Security techniques Security requirements for cryptographic modules First Edition Information technology Biometric data interchange formats Part 1: Framework First Edition Information technology Biometric data interchange formats Part 2: Finger minutiae data First Edition Information technology Biometric data interchange formats Part 3: Finger pattern spectral data First Edition Information technology Biometric data interchange formats Part 4: Finger image data First Edition Information technology - Biometric data interchange formats - Part 5: Face image data First Edition Information technology ù Biometric data interchange formats ù Part 5: Face image data AMENDMENT 1: Conditions for taking photographs for face image data Information technology Biometric data interchange formats Part 6: Iris image data First Edition

ISO ISO ISO ISO ISO

19794-7 19794-8 19794-9 19794-10 19795-1

ISO

19796-1

ISO ISO

19798 19799

Information technology ù Biometric data interchange formats ù Part 7: Signature/sign time series data First Edition Information technology Biometric data interchange formats Part 8: Finger pattern skeletal data First Edition Information technology ù Biometric data interchange formats ù Part 9: Vascular image data First Edition Information technology ù Biometric data interchange formats ù Part 10: Hand geometry silhouette data First Edition Information technology Biometric performance testing and reporting Part 1: Principles and framework First Edition Information technology Learning, education and training Quality management, assurance and metrics Part 1: General approach First Edition Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components First Edition Information technology ù Method of measuring gloss uniformity on printed pages

ISO

19812

Road vehicles M10 Î 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings First Edition

ISO ISO

19813 19819

ISO ISO

19840 19860

ISO

19879 CORR 1

ISO ISO

19879 19900

ISO

19901-1

ISO

19901-2

ISO

19901-4

ISO

19901-5

ISO ISO

19901-7 19903

Road vehicles Ignition systems Test methods and requirements for high voltage boots on plug-top coils and pencil coils First Edition Metallic materials Tensile testing in liquid helium First Edition Paints and varnishes Corrosion protection of steel structures by protective paint systems Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces First Edition Gas turbines Data acquisition and trend monitoring system requirements for gas turbine installations First edition Metallic tube connections for fluid power and general use ù Test methods for hydraulic fluid power connections TECHNICAL CORRIGENDUM 1 First Edition Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections First Edition; Supersedes ISO 8434-5:1995 Petroleum and Natural Gas Industries - General Requirements for Offshore Structures First Edition Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations First Edition Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria First Edition Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations First Edition Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and construction First Edition Petroleum and natural gas industries Specific requirements for offshore structures Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units First Edition; Replaces ISO TR 13637 Petroleum and natural gas industries Fixed concrete offshore structures First Edition

ISO

19904-1

Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars First Edition

ISO

19921

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

19922 19932-1 19932-2 19933 19952 19953 19954 19956 19957 CORR 1 19957 19958 19959 19960 19973-1 19973-2 19973-3 19973-4 19980 20000-1 20000-2

ISO

20019

ISO

20022-1

ISO

20022-2

ISO ISO ISO

20022-2 20032 20060

ISO

20061

Ships and marine technology Fire resistance of metallic pipe components with resilient and elastomeric seals Test methods First Edition Ships and marine technology Fire resistance of metallic pipe components with resilient and elastomeric seals Requirements imposed on the test bench First Edition Equipment for crop protection Knapsack sprayers Part 1: Requirements and test methods First Edition Equipment for crop protection Knapsack sprayers Part 2: Performance limits First Edition Space systems - Format for spacecraft launch environment test report First Edition Footwear Vocabulary Chaussures Vocabulaire First edition Footwear Test methods for heels Resistance to lateral impact First Edition Footwear Test methods for whole shoe Washability in a domestic washing machine First Edition Footwear Test methods for heels Fatigue resistance First Edition Footwear ù Test methods for heels ù Heel pin holding strength TECHNICAL CORRIGENDUM 1 First Edition Footwear ù Test methods for heels ù Heel pin holding strength First Edition Footwear Test methods for heels and top pieces Top piece retention strength First Edition Visual examination of the surface condition of investment castings Steel, nickel alloys and cobalt alloys First edition Cast steels and alloys with special physical properties First edition Pneumatic fluid power - Assessment of component reliability by testing - Part 1: General procedures First Edition Pneumatic fluid power ù Assessment of component reliability by testing ù Part 2: Directional control valves First Edition Pneumatic fluid power - Assessment of component reliability by testing - Part 3: Cylinders with piston rod First Edition Pneumatic fluid power ù Assessment of component reliability by testing ù Part 4: Pressure regulators First Edition Ophthalmic instruments Corneal topographers First Edition Information technology - Service management - Part 1: Specification First Edition Information technology - Service management - Part 2: Code of practice First Edition Agricultural Vehicles - Mechanical Connections on Towed Vehicles - Dimensions for Hitch Rings First Edition; Technical Corrigendum 1: 10/1/2004 Financial services UNIversal Financial Industry message scheme Part 1: Overall methodology and format specifications for inputs to and outputs from the ISO 20022 Repository First Edition Financial services ù UNIversal Financial Industry message scheme ù Part 2: Roles and responsibilities of the registration bodies Second Edition Financial services UNIversal Financial Industry message scheme Part 2: Roles and responsibilities of the registration bodies First Edition Method for evaluation of tensile properties of metallic superplastic materials First edition Information Technology - Open Terminal Architecture (OTA) Specification - Virtual Machine Specification First Edition Information Technology - 12,65 mm Wide Magnetic Tape Cassette for Information Interchange - Helical Scan Recording - DTF-2 First Edition

ISO

20062

ISO ISO

20079 20081

ISO

20113

ISO

20114

ISO

20115

ISO

20116

ISO

20117

ISO ISO

20126 20127

ISO ISO

20128 20160

ISO

20161

ISO ISO

20162 20176

ISO ISO

20179 20182

ISO

20200

ISO

20202

Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - VXA-1 Format First Edition Water quality Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) Duckweed growth inhibition test First Edition Zinc and zinc alloys Method of sampling Specifications First Edition Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification, functional model and information flows Make call request supplementary service First Edition Information technology Telecommunications and information exchange between systems Private Integrated Services Network (PISN) Inter-exchange signalling rotocol Make call request supplementary service First Edition Information technology Telecommunications and information exchange between systems Private Integrated Services Network Use of QSIG for Message Centre Access (MCA) profile standard First Edition Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification, functional model and information flows Message centre monitoring and mailbox identification supplementary services First Edition Information technology Telecommunications and information exchange between systems Private Integrated Services Network Interexchange signalling protocol Message centre monitoring and mailbox identification supplementary services First Edition Dentistry - Manual toothbrushes - General requirements and test methods First Edition; Together with ISO 22254 Replaces ISO 8627:1987 Dentistry Powered toothbrushes General requirements and test methods First Edition Milk products Enumeration of presumptive Lactobacillus acidophilus on a selective medium Colony-count technique at 37 ░C First Edition; See also IDF 192 Implants for surgery Metallic materials Classification of microstructures for alpha+beta titanium alloy bars First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Use of QSIG at the C Reference Point between a PINX and an Interconnecting Network First Edition Information Technology - Data Interchange on 300 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity: 30 Gbytes Per Cartridge First Edition Road vehicles H-point machine (HPM II) Specifications and procedure for H-point determination First Edition Water quality Determination of microcystins Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection First Edition Refractory test piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns First Edition Plastics Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratoryscale test First Edition Carbonaceous materials used in the production of aluminium Cold and tepid ramming pastes Preparation of baked test pieces and determination of loss on baking First Edition

ISO ISO ISO ISO

20203 20242-1 20252 20279

ISO ISO

20280 20282-1

ISO ISO ISO ISO ISO ISO

20283-3 20299-1 20299-2 20301 20302 20340

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

20341 20344 AMD 1 20344 CORR 1 20344 20345 AMD 1 20345 CORR 2 20345 CORR 1 20345 20346 AMD 1 20346 CORR 2 20346 CORR 1 20346 20347 AMD 1 20347 CORR 2 20347 CORR 1 20347 20361 20392 20393 20394

Carbonaceous materials used in the production of aluminium Calcined coke Determination of crystallite size of calcined petroleum coke by X-ray diffraction First edition Industrial automation systems and integration Service interface for testing applications Part 1: Overview First Edition Market, opinion and social research Vocabulary and service requirements First Edition Soil quality Extraction of thallium and determination by electrothermal atomic absorption spectrometry First Edition Soil quality ù Determination of arsenic, antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry First Edition Ease of operation of everyday products Part 1: Design requirements for context of use and user characteristics First Edition Mechanical vibration Measurement of vibration on ships Part 3: Pre-installation vibration measurement of shipboard equipment First Edition Film for wrapping rubber bales Part 1: Butadiene rubber (BR) and styrenebutadiene rubber (SBR) First Edition Film for wrapping rubber bales Part 2: Natural rubber First Edition Health informatics Health cards General characteristics First Edition Health informatics Health cards Numbering system and registration procedure for issuer identifiers First Edition Paints and varnishes Performance requirements for protective paint systems for offshore and related structures First Edition Surface chemical analysis Secondary-ion mass spectrometry Method for estimating depth resolution parameters with multiple deltalayer reference materials First Edition Personal protective equipment ù Test methods for footwear AMENDMENT 1 First Edition Personal protective equipment ù Test methods for footwear TECHNICAL CORRIGENDUM 1 First Edition Personal protective equipment ù Test methods for footwear First Edition [Replaced: ISO 8782-1] Personal protective equipment ù Safety footwear AMENDMENT 1 First Edition Personal protective equipment ù Safety footwear TECHNICAL CORRIGENDUM 2 First Edition Personal protective equipment ù Safety footwear TECHNICAL CORRIGENDUM 1 First Edition Personal protective equipment ù Safety footwear First Edition Personal protective equipment ù Protective footwear AMENDMENT 1 First Edition Personal protective equipment ù Protective footwear TECHNICAL CORRIGENDUM 2 First Edition Personal protective equipment ù Protective footwear TECHNICAL CORRIGENDUM 1 First Edition Personal protective equipment ù Protective footwear First Edition Personal protective equipment ù Occupational footwear; Amendment 1 First Edition Personal protective equipment ù Occupational footwear TECHNICAL CORRIGENDUM 2 First Edition Personal protective equipment ù Occupational footwear TECHNICAL CORRIGENDUM 1 First Edition Personal protective equipment ù Occupational footwear First Edition [Replaced: ISO 8782-4] Liquid pumps and pump units ù Noise test code ù Grades 2 and 3 of accuracy First Edition Thermal-insulating materials ù Determination of compressive creep First Edition Thermal-insulating materials ù Determination of long-term water absorption by diffusion First Edition Thermal-insulating materials ù Determination of freeze-thaw resistance First Edition

Pneumatic fluid power systems ù Directional control valves ù Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm TECHNICAL CORRIGENDUM 1 First Edition Pneumatic fluid power systems ù Directional control valves ù Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm First Edition

ISO

20401 CORR 1

ISO

20401

ISO ISO ISO

20421-1 20421-2 20433

ISO

20462-1

ISO

20462-2 CORR 1

ISO

20462-2

Photography - Psychophysical experimental methods for estimating image quality - Part 2: Triplet comparison method First Edition

ISO ISO ISO

20462-3 20473 20482

Photography - Psychophysical experimental methods for estimating image quality - Part 3: Quality ruler method First Edition Optics and photonics ù Spectral bands First Edition Metallic materials Sheet and strip Erichsen cupping test First Edition

ISO ISO

20483 20501

ISO

20502

ISO

20504

ISO

20505

ISO ISO

20506 20507

ISO

20508

ISO

20509

Cryogenic vessels Large transportable vacuum-insulated vessels Part 1: Design, fabrication, inspection and testing First Edition Cryogenic vessels Large transportable vacuum-insulated vessels Part 2: Operational requirements First Edition Leather Tests for colour fastness Colour fastness to crocking First Edition Photography - Psychophysical experimental methods for estimating image quality - Part 1: Overview of psychophysical elements First Edition Photography ù Psychophysical experimental methods for estimating image quality ù Part 2: Triplet comparison method TECHNICAL CORRIGENDUM 1 First Edition

Cereals and pulses Determination of the nitrogen content and calculation of the crude protein content Kjeldahl method First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Weibull statistics for strength data First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for compressive behaviour of continuous fibrereinforced composites at room temperature First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of the interlaminar shear strength of continuousfibre-reinforced composites at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of the in-plane shear strength of continuous-fibrereinforced composites at ambient temperature by the Iosipescu test First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Vocabulary First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of light transmittance of ceramic films with transparent substrate First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of oxidation resistance of non-oxide monolithic ceramics First Edition

ISO

20552

ISO ISO

20553 20562

ISO ISO ISO

20563 20566 20567-1

ISO

20567-2

ISO

20585

ISO ISO ISO ISO

20623 20643 20645 20652

ISO ISO ISO

20653 20672 20673

ISO

20683-1

ISO ISO

20683-2 20685

ISO ISO

20712-2 20723

ISO

20725

ISO

20726

ISO

20727

Workplace air ù Determination of mercury vapour ù Method using goldamalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry First edition Radiation protection Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material First Edition Tyre valves ISO core chambers No. 1, No. 2 and No. 3 First Edition; Replaces ISO 6762:1982 and ISO 7442:1982 Information Technology - 80 mm (1,23 Gbytes Per Side) and 120 mm (3,95 Gbytes Per Side) DVD-Recordable Disk (DVD-R) First Edition Paints and varnishes Determination of the scratch resistance of a coating system using a laboratory car-wash First Edition Paints and varnishes Determination of stone-chip resistance of coatings Part 1: Multi-impact testing First Edition Paints and varnishes Determination of stone-chip resistance of coatings Part 2: Single-impact test with a guided impact body First Edition Wood-based panels Determination of wet bending strength after immersion in water at 70 ░C or 100 ░C (boiling temperature) First Edition Petroleum and related products Determination of the extreme-pressure and anti-wear properties of fluids Four ball method (European conditions) First Edition Mechanical vibration Hand-held and hand-guided machinery Principles for evaluation of vibration emission First Edition Textile fabrics Determination of antibacterial activity Agar diffusion plate test First Edition Space data and information transfer systems Producerûarchive interface Methodology abstract standard First Edition Road vehicles Degrees of protection (IP-Code) Protection of electrical equipment against foreign objects, water and access First Edition Ships and marine technology -- Rate of turn indicators First Edition Ships and marine technology - Electric rudder angle indicators First Edition Aircraft ground equipment Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear Part 1: Main-line aircraft First Edition Aircraft ground equipment Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with noselanding gear Part 2: Regional aircraft First Edition 3-D scanning methodologies for internationally compatible anthropometric databases First Edition Water safety signs and beach safety flags ù Part 2: Specifications for beach safety flags ù Colour, shape, meaning and performance First Edition Structural steels Surface condition of hot-rolled sections Delivery requirements First Edition Textile machinery Condensers for cotton spinning Vocabulary and principles of construction MatÚriel pour l'industrie textile Condenseurs pour la filature du coton Vocabulaire et principes de construction First Edition Textile machinery Hopper feeders for cotton spinning Vocabulary and principles of construction MatÚriel pour l'industrie textile Chargeuses pour la filature du coton Vocabulaire et principes de construction First Edition Textile machinery Mixing bale openers for cotton spinning Vocabulary and principles of construction MatÚriel pour l'industrie textile Briseballes mÚlangeurs pour la filature du coton Vocabulaire et principes de construction First Edition

ISO ISO ISO ISO

20730 20743 20752 20763

ISO

20764

ISO

20765-1

ISO

20773

ISO

20774

ISO

20776-1

ISO

20776-2

ISO

20783-1

Gas cylinders Refillable welded aluminium-alloy cylinders Design, construction and testing First Edition Textiles ù Determination of antibacterial activity of antibacterial finished products First Edition Cork stoppers ù Determination of releasable 2, 4, 6-trichloroanisol (TCA) First edition Petroleum and related products Determination of anti-wear properties of hydraulic fluids Vane pump method First Edition Petroleum and related products Preparation of a test portion of highboiling liquids for the determination of water content Nitrogen purge method First Edition Natural gas Calculation of thermodynamic properties Part 1: Gas phase properties for transmission and distribution applications First Edition Cigarettes ù Determination of nicotinefree dry particulate matter and nicotine in sidestream smoke ù Method using a routine analytical linear smoking machine equipped with a fishtail chimney First Edition Cigarettes ù Determination of carbon monoxide in sidestream smoke ù Method using a routine analytical linear smoking machine equipped with a fishtail chimney First Edition Clinical laboratory testing and in vitro diagnostic test systems Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices Part 1: Reference method for testing the in vitro activity of antimicrobial agents against rapidly growing aerobic bacteria involved in infectious diseases First Edition Clinical laboratory testing and in vitro diagnostic test systems ù Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices ù Part 2: Evaluation of performance of antimicrobial susceptibility test devices First Edition Petroleum and related products Determination of emulsion stability of fire-resistant fluids Part 1: Fluids in category HFAE First Edition

ISO ISO

20783-2 20785-1

Petroleum and related products Determination of emulsion stability of fire-resistant fluids Part 2: Fluids in category HFB First Edition Dosemetry for exposures to cosmic radiation in civilian aircraft Part 1: Conceptual basis for measurements First Edition

ISO ISO ISO

20805 20806 20807

ISO

20808

ISO ISO ISO

20823 20826 20828

ISO

20837

Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming First Edition Mechanical vibration Criteria and safeguards for the in-situ balancing of medium and large rotors First Edition Non-destructive testing Qualification of personnel for limited applications of non-destructive testing First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method First Edition Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold ignition test First Edition Automotive LPG components Containers First Edition Road vehicles Security certificate management First Edition Microbiology of food and animal feeding stuffs Polymerase chain reaction (PCR) for the detection of food-borne pathogens Requirements for sample preparation for qualitative detection First Edition

Microbiology of food and animal feeding stuffs Polymerase chain reaction (PCR) for the detection of food-borne pathogens Requirements for amplification and detection for qualitative methods First Edition

ISO

20838

ISO ISO

20843 20846

ISO

20847

ISO

20848-1

Packaging Plastics drums Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l First Edition

ISO

20848-2

ISO

20848-3

Packaging Plastics drums Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l First Edition Packaging Plastics drums Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

20859 20863 20864 20865 20866 20867 20868 20869 20870 20871 20872 20873 20874 20875 20876 20877

ISO

20884

ISO ISO ISO

20903 20904 20905

Petroleum and related products Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC First edition Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method First Edition Petroleum products Determination of sulfur content of automotive fuels Energy-dispersive X-ray fluorescence spectrometry First Edition

Cinematography Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film First Edition Footwear Test methods for stiffeners and toepuffs Bondability First Edition Footwear Test methods for stiffeners and toepuffs - Mechanical characteristics First Edition Footwear - Test Methods for Outsoles - Compression Energy First Edition Footwear - Test Methods for Insoles - Delamination Resistance First Edition Footwear - Test Methods for Insoles - Heel Pin Holding Strength First Edition Footwear - Test Methods for Insoles - Abrasion Resistance First Edition Footwear - Test Methods for Outsoles, Insoles, Lining and Insocks - Water Soluble Content First Edition Footwear - Ageing Conditionning First Edition Footwear - Test Methods for Outsoles - Abrasion Resistance First Edition Footwear - Test Methods for Outsoles - Tear Strength First Edition Footwear - Test Methods for Outsoles - Dimensional Stability First Edition Footwear - Test Methods for Outsoles - Needle Tear Strength First Edition Footwear - Test Methods for Outsoles - Determination of Split Tear Strength and Delamination Resistance First Edition Footwear - Test Methods for Insoles - Resistance to Stitch Tear First Edition Footwear - Test Methods for Whole Shoe - Thermal Insulation First Edition Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry First Edition Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Methods used to determine peak intensities and information required when reporting results First Edition Hard coal Sampling of slurries First Edition Coal preparation Determination of dust/moisture relationship for coal First Edition

ISO ISO

20926 20957-1

ISO

20957-2

ISO

20957-4

ISO ISO

20957-5 20957-6

ISO

20957-7

ISO

20957-8

ISO

20957-9

ISO ISO ISO ISO ISO

20957-10 20963 20965 20966 20968

ISO ISO

20970 20988

ISO ISO

20998-1 21000-2

ISO

19795-2

ISO ISO

21000-3 AMD 1 21000-3

ISO

21000-4

ISO

21000-4 FDAM 1

Software engineering IFPUG 4.1 Unadjusted functional size measurement method Counting practices manual First Edition Stationary training equipment Part 1: General safety requirements and test methods First edition Stationary training equipment Part 2: Strength training equipment, additional specific safety requirements and test methods First edition Stationary training equipment Part 4: Strength training benches, additional specific safety requirements and test methods First Edition Stationary training equipment Part 5: Pedal crank training equipment, additional specific safety requirements and test methods First Edition Stationary training equipment Part 6: Treadmills, additional specific safety requirements and test methods First Edition Stationary training equipment - Part 7: Rowing machines, additional specific safety requirements and test method First Edition Stationary training equipment - Part 8: Steppers, stairclimbers and climbers Additional specific safety requirements and test methods First Edition Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods First Edition Stationary training equipment ù Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods First Edition Soil quality Effects of pollutants on insect larvae (Oxythyrea funesta) Determination of acute toxicity First edition Plastics Determination of the transient extensional viscosity of polymer melts First Edition Automatic milking installations ù Requirements and testing First Edition Software Engineering - Mk II Function Point Analysis - Counting Practices Manual First Edition Information Technology - Programming Languages, Their Environments and System Software Interfaces - JEFF File Format First Edition Air quality ù Guidelines for estimating measurement uncertainty First Edition Measurement and characterization of particles by acoustic methods Part 1: Concepts and procedures in ultrasonic attenuation spectroscopy First Edition Information technology Multimedia framework (MPEG-21) Part 2: Digital Item Declaration Second Edition Information technology ù Biometric performance testing and reporting ù Part 2: Testing methodologies for technology and scenario evaluation First Edition Information technology ù Multimedia framework (MPEG-21) ù Part 3: Digital Item Identification AMENDMENT 1: Related identifier types First Edition Information Technology - Multimedia Framework (MPEG-21) - Part 3: Digital Item Identification First Edition Information technology Multimedia framework (MPEG-21) Part 4: Intellectual Property Management and Protection Components First Edition Information technology ù Multimedia framework (MPEG-21) ù Part 4: Intellectual Property Management and Protection Components AMENDMENT 1: IPMP components base profile First Edition

ISO

21000-5 AMD 2

ISO ISO

21000-5 AMD 1 21000-5

ISO

21000-6 CORR 2

ISO

21000-6 AMD 1

ISO ISO

21000-6 CORR 1 21000-6

ISO

21000-7 AMD 2

ISO ISO ISO ISO

21000-7 AMD 1 21000-7 21000-8 21000-9

ISO ISO ISO ISO

21000-10 AMD 1 21000-10 21000-15 21000-16

ISO ISO ISO

21000-17 21000-18 21004

ISO ISO

21005 21006

ISO

21007-1

ISO ISO

21007-2 21009-2

Information technology ù Multimedia framework (MPEG-21) ù Part 5: Rights Expression Language AMENDMENT 2: DAC (Dissemination And Capture) profile First Edition Information technology Multimedia framework (MPEG-21) - Part 5: Rights Expression Language AMENDMENT 1: MAM (Mobile And optical Media) profile First Edition Information technology Multimedia framework (MPEG-21) Part 5: Rights Expression Language First Edition Information technology Multimedia framework (MPEG-21) Part 6: Rights Data Dictionary TECHNICAL CORRIGENDUM 2 First Edition Information technology ù Multimedia framework (MPEG-21) ù Part 6: Rights Data Dictionary AMENDMENT 1: Digital Item Identifier relationship types First Edition Information technology Multimedia framework (MPEG-21) Part 6: Rights Data Dictionary TECHNICAL CORRIGENDUM 1 First Edition Information technology Multimedia framework (MPEG-21) Part 6: Rights Data Dictionary First Edition Information technology ù Multimedia framework (MPEG-21) ù Part 7: Digital Item Adaptation AMENDMENT 2: Dynamic and Distributed Adaptation First Edition Information technology ù Multimedia framework (MPEG-21) ù Part 7: Digital Item Adaptation AMENDMENT 1: DIA Conversions and Permissions First Edition Information technology ù Multimedia framework (MPEG-21) ù Part 7: Digital Item Adaptation First Edition Information technology û Multimedia framework (MPEG-21) û Part 8: Reference Software First Edition Information technology - Multimedia framework (MPEG-21) - Part 9: File Format First Edition Information technology ù Multimedia framework (MPEG-21) ù Part 10: Digital Item Processing AMENDMENT 1: Additional C++ bindings First Edition Information technology ù Multimedia framework (MPEG-21) ù Part 10: Digital Item Processing First Edition Information technology Multimedia framework (MPEG-21) Part 15: Event Reporting First Edition Information technology Multimedia framework (MPEG-21) Part 16: Binary Format First Edition Information technology Multimedia framework (MPEG-21) Part 17: Fragment Identification of MPEG Resources First Edition Information technology ù Multimedia framework (MPEG-21) ù Part 18: Digital Item Streaming First Edition Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply First Edition Ships and marine technology Thermally toughened safety-glass panes for windows and side scuttles First Edition; Replaces ISO 1095:1989 and 3254:1989 Internal combustion engines Engine weight (mass) declaration First Edition Gas cylinders Identification and marking using radio frequency identification technology Part 1: Reference architecture and terminology First Edition Gas cylinders Identification and marking using radio frequency identification technology Part 2: Numbering schemes for radio frequency identification First Edition Cryogenic vessels Static vacuum insulated vessels Part 2: Operational requirements First Edition

ISO ISO

21010 21012

Cryogenic vessels Gas/materials compatibility First Edition Cryogenic vessels Hoses First Edition

ISO ISO ISO ISO ISO

21013-2 21013-3 21014 21015 21016

Cryogenic vessels ù Pressure-relief accessories for cryogenic service ù Part 2: Non-reclosable pressure-relief devices First Edition Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination First Edition Cryogenic vessels Cryogenic insulation performance First Edition Office furniture ù Office work chairs ù Test methods for the determination of stability, strength and durability First Edition Office furniture ù Tables and desks ù Test methods for the determination of stability, strength and durability First Edition

ISO

21028-1

ISO

21028-2

ISO ISO ISO ISO

21029-2 21048 21049 21067

ISO

21069-1

ISO ISO

21078-2 21093

ISO

21107

ISO ISO ISO ISO

21117 21118 21127 21128

ISO ISO ISO ISO ISO ISO

21129 21147 21148 21149 21150 21171

Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below - 80 ░C First Edition Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 2: Temperatures between - 80 ░C and - 20 ░C First Edition Cryogenic vessels Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 2: Operational requirements First Edition Plastics Epoxy resins Determination of 1,2-glycol content First Edition Pumps Shaft sealing systems for centrifugal and rotary pumps First Edition Packaging ù Vocabulary First Edition Road vehicles Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester Part 1: Pneumatic braking systems First Edition Determination of boron(III) oxide in refractory products Part 2: Acid extraction method for the determination of boron(III) oxide in binder components First Edition Oil of dwarf pine (Pinus mugo Turra) First Edition Rolling bearings and spherical plain bearings Search structure for electronic media Characteristics and performance criteria identified by attribute vocabulary First Edition Information technology - Office equipment - Copying machines and Multi-function devices - Information to be included in specification sheets and related test methods First Edition Information to be included in specification sheets Data projectors First Edition Information and documentation A reference ontology for the interchange of cultural heritage information First Edition Cork Stoppers Determination of Oxidizing Residues Iodometric Titration Method First Edition Hygrothermal performance of building materials and products - Determination of water-vapour transmission properties - Box method First Edition Fine-Cut Tobacco and Smoking Articles Made From It - Survey and Analysis of Consumer-Made Articles First Edition Cosmetics Microbiology General instructions for microbiological examination First Edition Cosmetics Microbiology Enumeration and detection of aerobic mesophilic bacteria First Edition Cosmetics Microbiology Detection of Escherichia coli First Edition Medical gloves Determination of removable surface powder First Edition

ISO ISO ISO ISO ISO ISO

21178 21179 21180 21181 21182 21183-1

ISO ISO

21183-2 21188

ISO ISO ISO

21207 21214 21227-1

ISO

21227-2

ISO

21227-3

ISO ISO ISO

21238 21247 21270

ISO ISO

21281 21287

ISO

21308-2

ISO

21308-3

ISO ISO ISO ISO ISO ISO ISO

21329 21347 21348 21349 21350 21351 21358

Light conveyor belts - Determination of electrical resistances First Edition Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt First Edition Light conveyor belts - Determination of the maximum tensile strength First Edition Light conveyor belts Determination of the relaxed elastic modulus First Edition Light conveyor belts Determination of the coefficient of friction First Edition Light conveyor belts Part 1: Principal characteristics and applications First Edition Light conveyor belts Part 2: List of equivalent terms Courroies transporteuses lÚg×res Partie 2: Liste des termes Úquivalents First Edition Public key infrastructure for financial services Practices and policy framework First Edition Corrosion tests in artificial atmospheres Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying First Edition Intelligent transport systems Continuous air interface, long and medium range (CALM) Infra-red systems First Edition Paints and varnishes Evaluation of defects on coated surfaces using optical imaging Part 1: General guidance First Edition Paints and varnishes Evaluation of defects on coated surfaces using optical imaging Part 2: Evaluation procedure for multi-impact stone-chipping test First Edition Paints and varnishes ù Evaluation of defects on coated surfaces using optical imaging ù Part 3: Evaluation of delamination and corrosion around a scribe First Edition Nuclear energy ù Nuclear fuel technology ù Scaling factor method to determine the radioactivity of low- and intermediate-level radioactive waste packages generated at nuclear power plants First Edition Combined accept-zero sampling systems and process control procedures for product acceptance First edition Surface chemical analysis X-ray photoelectron and Auger electron spectrometers Linearity of intensity scale First Edition Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks Rules for the construction and layout of pedals First Edition Pneumatic fluid power Cylinders Compact cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm First Edition Road vehicles Product data exchange between chassis and bodywork manufacturers (BEP) Part 2: Dimensional bodywork exchange parameters First Edition Road vehicles ù Product data exchange between chassis and bodywork manufacturers (BEP) ù Part 3: General, mass and administrative exchange parameters First Edition Petroleum and natural gas industries Pipeline transportation systems Test procedures for mechanical connectors First Edition Space systems Fracture and damage control First edition Space environment (natural and artificial) ù Process for determining solar irradiances First Edition Space systems ù Project reviews First Edition Space systems ù Off-the-shelf item utilization First Edition Space systems Functional and technical specifications First edition Vacuum technology ù Right-angle valve ù Dimensions and interfaces for pneumatic actuator First edition

ISO

21360

ISO

21367

ISO ISO ISO ISO

21368 21389 21390 21398

ISO

21407

ISO

21408

ISO

21409

ISO

21410

ISO ISO

21411 21413

ISO

21415-1

ISO

21415-2

ISO

21415-3

ISO

21415-4

ISO

21427-1

ISO

21427-2

ISO ISO ISO

21459 21460 21461

Vacuum technology ù Standard methods for measuring vacuum-pump performance ù General description First Edition Plastics ù Reaction to fire ù Test method for flame spread and combustion product release from vertically oriented specimens First Edition Adhesives Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures First Edition Oil of gum turpentine, Chinese (mainly from Pinus massoniana Lamb.) First Edition Oil of wintergreen, China [Gaultheria yunnanensis (Franch.) Rehd.], redistilled First Edition Hard coal and coke - Guidance to the inspection of mechanical sampling systems First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Simple Dialog Supplementary Service First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Simple Dialog Supplementary Service Second Edition Information technology Telecommunications and information exchange between systems Corporate telecommunication networks Signalling interworking between QSIG and H.323 Generic functional protocol for the support of supplementary services First Edition Information Technology - Telecommunications and Information Exchange between Systems - Corporate Telecommunication Networks - Signalling Interworking between QSIG and H.323 - Call Transfer Supplementary Services First Edition Information technology Telecommunications and information exchange between systems Corporate telecommunication networks Signalling interworking between QSIG and H.323 Call diversion supplementary services First Edition Manual methods for the measurement of a groundwater level in a well First Edition Wheat and wheat flour Gluten content Part 1: Determination of wet gluten by a manual method First Edition; Together with ISO 21415-2 supersedes ISO 5531: 1978 Wheat and wheat flour Gluten content Part 2: Determination of wet gluten by mechanical means First Edition [Superseded: ISO 5531] [Superseded By: ISO 7495] Wheat and wheat flour Gluten content Part 3: Determination of dry gluten from wet gluten by an oven drying method First Edition; Together with ISO 21415-4 supersedes ISO 6645: 1981 Wheat and wheat flour Gluten content Part 4: Determination of dry gluten from wet gluten by a rapid drying method First Edition; Together with ISO 21415-3 supersedes ISO 6645: 1981 Water quality Evaluation of genotoxicity by measurement of the induction of micronuclei Part 1: Evaluation of genotoxicity using amphibian larvae First Edition Water quality Evaluation of genotoxicity by measurement of the induction of micronuclei Part 2: Mixed population method using the cell line V79 First Edition Space data and information transfer systems Proximity-1 space link protocol Coding and synchronization sublayer First Edition Space data and information transfer systems Proximity-1 space link protocol Physical layer First Edition Rubber Determination of the aromaticity of oil in vulcanized rubber compounds First Edition

ISO ISO

21467 21469

ISO ISO ISO

21481 21485 21487

ISO

21501-2

ISO

21501-3

ISO ISO ISO

21501-4 21507 21509

ISO

21528-1

Earth-moving machinery Horizontal directional drills Terminology and specifications First Edition Safety of Machinery Lubricants with Incidental Product Contact Hygiene Requirements First Edition Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol -2 (NFCIP-2) First Edition Textile machinery Draw frame for cotton spinning Vocabulary and principles of construction First Edition Small craft Permanently installed petrol and diesel fuel tanks First Edition Determination Of Particle Size Distribution -- Single Particle Light Interaction Methods -- Part 2: Light Scattering Liquid-Borne Particle Counter First Edition [Superseded: ISO 13323-1] Determination of particle size distribution ù Single particle light interaction methods ù Part 3: Light extinction liquid-borne particle counter First Edition [Superseded: ISO 13323-1] Determination of particle size distribution ù Single particle light interaction methods ù Part 4: Light scattering airborne particle counter for clean spaces First Edition [Superseded: ISO 13323-1] Earth-moving machinery - Performance requirements for non-metallic fuel tanks First Edition Plastics and ebonite Verification of Shore durometers First Edition Microbiology of food and animal feeding stuffs Horizontal methods for the detection and enumeration of Enterobacteriaceae Part 1: Detection and enumeration by MPN technique with pre-enrichment First Edition; Together with ISO 21528-2, Cancels and Replaces ISO 5552:1997, 7402:1993, and 8523:1991

ISO ISO ISO ISO

21528-2 21530 21533 21534

Microbiology of food and animal feeding stuffs Horizontal methods for the detection and enumeration of Enterobacteriaceae Part 2: Colony-count method First Edition; Together with ISO 21528-1, Cancels and Replaces ISO 5552:1997, 7402:1993, and 8523:1991 Dentistry Materials used for dental equipment surfaces Determination of resistance to chemical disinfectants First Edition Dentistry Reusable cartridge syringes intended for intraligamentary injections First Edition Non-active surgical implants Joint replacement implants Particular requirements Second edition

ISO

21535

ISO ISO ISO

21536 21537-1 21537-2

Non-active surgical implants ù Joint replacement implants ù Specific requirements for hip-joint replacement implants Second Edition Non-active surgical implants ù Joint replacement implants ù Specific requirements for knee-joint replacement implants Second Edition Clamping flanges for superabrasive cutting-off wheels Part 1: Natural stone First Edition Clamping flanges for superabrasive cutting-off wheels Part 2: Building and construction First Edition

ISO ISO ISO ISO ISO ISO

21538 21543 21549-1 21549-2 21549-3 21549-4

Blanks for superabrasive cutting-off wheels Mounting and fixing bores Building construction and civil engineering First Edition Milk products Guidelines for the application of near infrared spectrometry First Edition Health informatics Patient healthcard data Part 1: General structure First Edition Health informatics Patient healthcard data Part 2: Common objects First Edition Health informatics Patient healthcard data Part 3: Limited clinical data First Edition Health informatics Patient healthcard data Part 4: Extended clinical data First Edition

ISO ISO ISO ISO

21549-7 21550 21561 21567

ISO

21569

ISO

21570 CORR 1

ISO

21570

ISO

21571

ISO

21572 CORR 1

Health informatics ù Patient healthcard data ù Part 7: Medication data First edition Photography Electronic scanners for photographic images Dynamic range measurements First Edition Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR First Edition Microbiology of food and animal feeding stuffs Horizontal method for the detection of Shigella spp. First Edition Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Qualitative nucleic acid based methods First Edition Foodstuffs ù Methods of analysis for the detection of genetically modified organisms and derived products ù Quantitative nucleic acid based methods TECHNICAL CORRIGENDUM 1 First Edition Foodstuffs ù Methods of analysis for the detection of genetically modified organisms and derived products ù Quantitative nucleic acid based methods First Edition Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Nucleic acid extraction First Edition Foodstuffs ù Methods for the detection of genetically modified organisms and derived products ù Protein based methods TECHNICAL CORRIGENDUM 1 First Edition

ISO

21572

Foodstuffs ù Methods for the detection of genetically modified organisms and derived products ù Protein based methods First Edition

ISO

21573-1

ISO

21587-1

ISO

21587-2

ISO

21587-3

ISO ISO ISO ISO ISO ISO

21592 21606 21627-1 21627-2 21627-3 21630

ISO

21647 CORR 1

ISO ISO

21647 21649

Building construction machinery and equipment Concrete pumps Part 1: Terminology and commercial specifications First Edition Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) ù Part 1: Apparatus, reagents, dissolution and gravimetric silica First Edition Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) ù Part 2: Wet chemical analysis First Edition Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) ù Part 3: Inductively coupled plasma and atomic absorption spectrometry methods First Edition Building construction machinery and equipment Concrete spraying machines Terminology and commercial specifications First Edition Dentistry ù Elastomeric auxiliaries for use in orthodontics First Edition Plastics - Epoxy Resins - Determination of Chlorine Content - Part 1: Inorganic Chlorine First Edition Plastics - Epoxy Resins - Determination of Chlorine Content - Part 2: Easily Saponifiable Chlorine First Edition Plastics - Epoxy Resins - Determination of Chlorine Content - Part 3: Total Chlorine First Edition Pumps ù Testing ù Submersible mixers for wastewater and similar applications First Edition Medical electrical equipment ù Particular requirements for the basic safety and essential performance of respiratory gas monitors TECHNICAL CORRIGENDUM 1 First Edition Medical electrical equipment ù Particular requirements for the basic safety and essential performance of respiratory gas monitors First Edition [Replaced: ISO 7767, ISO 7767, ISO 9918, ISO 11196] Needle-free injectors for medical use Requirements and test methods First Edition

ISO ISO ISO

21669 21670 21671

Steel wire ropes Determination of rotational properties First edition Hexagon weld nuts with flange First Edition Dentistry Rotary polishers First Edition Carbonaceous materials used in the production of aluminium ù Determination of density by gas pyknometry (volumetric) using helium as the analysis gas ù Solid materials First Edition Glass in building Glass blocks Specification and test methods First Edition Cinematography Method of measurement of perceived loudness of motion-picture audio material First Edition Road vehicles Safety enhancement in conjunction with tyre inflation pressure monitoring First Edition Gears - Cylindrical involute gears and gear pairs - Concepts and geometry First Edition [Cancelled: ISO TR 4467] Industrial valves - Globe valves of thermoplastics materials First Edition Microbiology of food and animal feeding stuffs Determination of water activity First Edition

ISO ISO ISO ISO ISO ISO ISO

21687 21690 21727 21750 21771 21787 21807

ISO

21847-1

Nuclear fuel technology ù Alpha spectrometry ù Part 1: Determination of neptunium in uranium and its compounds First Edition

ISO

21847-2

Nuclear fuel technology - Alpha spectrometry - Part 2: Determination of plutonium in uranium and its compounds First Edition

ISO ISO ISO ISO

21847-3 21848 21849 21869

Nuclear fuel technology - Alpha spectrometry - Part 3: Determination of uranium 232 in uranium and its compounds First Edition Road vehicles Electrical and electronic equipment for a supply voltage of 42 V Electrical loads First edition Aircraft and space Industrial data Product identification and traceability First Edition; Replaces ISO TS 21849:2003 Rubber compounding ingredients Magnesium oxide Methods of test FIrst Edition

ISO

21870

ISO

21871

ISO

21888

ISO ISO ISO ISO ISO ISO ISO ISO

21889 21898 21909 21927-2 21927-3 21948 21949 21950

Rubber compounding ingredients Carbon black Determination of high-temperature loss on heating by thermogravimetry First Edition Microbiology of food and animal feeding stuffs Horizontal method for the determination of low numbers of presumptive Bacillus cereus Most probable number technique and detection method First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Call Identification and Call Linkage Additional Network Feature First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Service Network Inter-Exchange Signalling Protocol - Call Identification and Call Linkage Additional Network Feature First Edition Packaging Flexible intermediate bulk containers (FIBCs) for non-dangerous goods First Edition Passive personal neutron dosemeters Performance and test requirements First edition Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators First Edition Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators First Edition Coated Abrasives - Plain Sheets First Edition Coated Abrasives - Plain Sheets with Holes for Dust Extraction First Edition Coated Abrasives - Plain Discs First Edition

ISO

21951

Coated Abrasives - Plain Discs with Holes for Dust Extraction First Edition

ISO

21961

Space Data and Information Transfer Systems - Data Entity Dictionary Specification Language (DEDSL) - Abstract Sytax First Edition

ISO

21962

ISO ISO ISO

21968 21969 21988

ISO

21989

ISO

21990

ISO

21991

ISO ISO ISO

21992 21994 22000

ISO

22005

ISO

22028-1 CORR 1

ISO ISO ISO

22028-1 22029 22030

ISO ISO ISO ISO ISO ISO

22032 22033 22034-1 22034-2 22037 22048

Space Data and Information Transfer Systems - Data Entity Dictionary Specification Language (DEDSL) - PVL Syntax First Edition Non-magnetic metallic coatings on metallic and non-metallic basis materials Measurement of coating thickness Phase-sensitive eddycurrent method First Edition High-pressure flexible connections for use with medical gas systems First edition Abrasion-resistant cast irons Classification First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Specification, Functional Model and Information Flows - Short Message Service First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Short Message Service First Edition Information Technology - Telecommunications and Information Exchange Between Systems - Corporate Telecommunication Networks - Signalling Interworking Between QSIG and H.323 - Call Completion Supplementary Services First Edition Information technology Telecommunications and information exchange between systems Private Integrated Services Network Mapping functions for the tunnelling of QSIG through IP networks First Edition Passenger cars ù Stopping distance at straight-line braking with ABS ù Openloop test method First Edition Food safety management systems Requirements for any organization in the food chain First Edition Traceability in the feed and food chain ù General principles and basic requirements for system design and implementation First Edition Photography and graphic technology ù Extended colour encodings for digital image storage, manipulation and interchange ù Part 1: Architecture and requirements TECHNICAL CORRIGENDUM 1 First Edition Photography and graphic technology Extended colour encodings for digital image storage, manipulation and interchange Part 1: Architecture and requirements First Edition Standard file format for spectral data exchange First Edition Soil quality Biological methods Chronic toxicity in higher plants First Edition Water quality Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge Method using extraction and gas chromatography/mass spectrometry First Edition Nickel alloys Determination of niobium Inductively coupled plasma atomic emmision spectrometric method First Edition Steel wire and wire products ù Part 1: General test methods First Edition Steel wire and wire products ù Part 2: Tolerances on wire dimensions First Edition Solid end mills with corner radii and cylindrical shanks made of hard cutting materials ù Dimensions First Edition Surface chemical analysis Information format for static secondary-ion mass spectrometry First Edition

ISO

22050

Information Technology - Data Interchange on 12,7 mm, 384-Track Magnetic Tape Cartridges - Ultrium-1 Format First Edition

ISO ISO ISO

22051 22072 22088-1

ISO

22088-2

ISO

22088-3

ISO

22088-4

ISO

22088-5

ISO ISO ISO

22088-6 22090-1 CORR 1 22090-1

ISO ISO

22090-2 CORR 1 22090-2

ISO ISO ISO

22090-3 CORR 1 22090-3 22091

ISO

22092

ISO ISO ISO

22093 22096 22112

ISO ISO ISO

22155 22156 22157-1

Information Technology - Data Interchange on 12,7 mm, 448-Track Magnetic Tape Cartridges - SDLT1 Format First Edition Aerospace Electrohydrostatic actuator (EHA) Characteristics to be defined in procurement specifications First edition Plastics Determination of resistance to environmental stress cracking (ESC) Part 1: General guidance First Edition Plastics Determination of resistance to environmental stress cracking (ESC) Part 2: Constant tensile load method First Edition;: 1992 [Superseded: ISO 6252] Plastics Determination of resistance to environmental stress cracking (ESC) Part 3: Bent strip method Plastiques DÚtermination de la fissuration sous contrainte dans un environnement donnÚ (ESC) Partie 3: MÚthode de l'Úprouvette courbÚe First Edition;:1986 [Replaced: ISO 4599] Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method Plastiques DÚtermination de la fissuration sous contrainte dans un environnement donnÚ (ESC) Partie 4: MÚthode par enfoncement de billes ou de goupilles First Edition;:1992 [Replaced: ISO 4600] Plastics Determination of resistance to environmental stress cracking (ESC) Part 5: Constant tensile deformation method Plastiques DÚtermination de la fissuration sous contrainte dans un environnement donnÚ (ESC) Partie 5: MÚthode de dÚformation en traction constante First Edition Plastics Determination of resistance to environmental stress cracking (ESC) Part 6: Slow strain rate method Plastiques DÚtermination de la fissuration sous contrainte dans un environnement donnÚ (ESC) Partie 6: MÚthode Ó vitesse de dÚformation lente First Edition Ships and marine technology ù Transmitting heading devices (THDs) ù Part 1: Gyro-compasses First Edition Ships and marine technology ù Transmitting heading devices (THDs) ù Part 1: Gyro-compasses First Edition Ships and marine technology ù Transmitting heading devices (THDs) ù Part 2: Geomagnetic principles TECHNICAL CORRIGENDUM 1 First Edition Ships and marine technology ù Transmitting heading devices (THDs) ù Part 2: Geomagnetic principles First Edition Ships and marine technology ù Transmitting heading devices (THDs) ù Part 3: GNSS principles TECHNICAL CORRIGENDUM 1 First Edition Ships and marine technology ù Transmitting heading devices (THDs) ù Part 3: GNSS principles First Edition Information Technology - Streaming Lossless Data Compression Algorithm (SLDC) First Edition Information Technology - Data Interchange on 130 mm Magneto-Optical Disk Cartridges - Capacity: 9,1 Gbytes per Cartridge First Edition Industrial automation systems and integration Physical device control Dimensional Measuring Interface Standard (DMIS) First Edition Condition monitoring and diagnostics of machines ù Acoustic emission First edition Dentistry Artificial teeth for dental prostheses First Edition; Replaces ISO 3336 and ISO 4824 Soil quality Gas chromatographic quantitative determination of volatile aromatic and halogenated hydrocarbons and selected ethers Static headspace method First Edition Bamboo Structural design First Edition Bamboo Determination of physical and mechanical properties Part 1: Requirements First Edition

ISO

22159

ISO ISO

22160 22168

ISO ISO

22174 22188

ISO ISO ISO ISO

22197-1 22198 22199 22200

ISO

22214

Personal equipment for protection against falls ù Descending devices First Edition Milk and milk-based drinks ù Determination of alkaline phosphatase activity ù Enzymatic photo-activated system (EPAS) method First Edition Road vehicles Holding test of coatings influencing the colour of light emitted by light source(s) Test methods First Edition Microbiology of food and animal feeding stuffs Polymerase chain reaction (PCR) for the detection of food-borne pathogens General requirements and definitions First edition Monitoring for inadvertent movement and illicit trafficking of radioactive material First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) ù Test method for air-purification performance of semiconducting photocatalytic materials ù Part 1: Removal of nitric oxide First Edition Textiles Fabrics Determination of width and length First Edition; Supersedes ISO 3932:1976 and ISO 3933:1976 Electromagnetic compatibility Product family standard for lifts, escalators and moving walks Emission First Edition Electromagnetic compatibility Product family standard of lifts, escalators and moving walks Immunity First Edition Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) Test Method for Cyclic Bending Fatigue of Monolithic Ceramics at Room Temperature First Edition

ISO ISO

22215 22222

Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for tensile creep of monolithic ceramics First Edition Personal financial planning Requirements for personal financial planners First Edition

ISO ISO

22234 22241-1

Cinematography Relative and absolute sound pressure levels for motion-picture multi-channel sound systems Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio First Edition Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements First Edition;:2005

ISO ISO ISO ISO

22241-2 22242 22254 22264

Diesel engines NOx reduction agent AUS 32 Part 2: Test methods First Edition;:2005 [Replaced: BSI DD ISO/PAS 22241-2] Road construction and road maintenance machinery and equipment Basic types Identification and description First Edition Dentistry Manual toothbrushes Resistance of tufted portion to deflection First Edition; Supersedes ISO 8627:1987 Telemark ski-boots for adults Interface with Telemark ski-bindings Requirements and test methods First Edition

ISO ISO ISO

22288 22308 22309

ISO ISO

22310 22314

ISO

22368-1

Leather Physical and mechanical tests Determination of flex resistance by the vamp flex method First Edition; IULTCS/IUP 39 Cork stoppers Sensory analysis First Edition Microbeam analysis Quantitative analysis using energy-dispersive spectrometry (EDS) First Edition Information and documentation Guidelines for standards drafters for stating records management requirements in standards First Edition Plastics Glass-fibre-reinforced products Determination of fibre length First Edition Crop protection equipment Test methods for the evaluation of cleaning systems Part 1: Internal cleaning of complete sprayers First Edition

ISO

22368-2

Crop protection equipment Test methods for the evaluation of cleaning systems Part 2: External cleaning of sprayers First Edition

ISO ISO ISO

22368-3 22369-1 22374

ISO

22391-1

ISO

22391-2

ISO

22391-3

ISO ISO ISO ISO ISO

22391-5 22414 22434 22435 22472

ISO ISO

22475-1 22476-2

ISO

22478

ISO

22489

Crop protection equipment Test methods for the evaluation of cleaning systems Part 3: Internal cleaning of tank First Edition Crop protection equipment Drift classification of spraying equipment Part 1: Classes First Edition Dentistry Dental handpieces Electrical-powered scalers and scaler tips First Edition Plastics piping systems for hot and cold water installations ù Polyethylene of raised temperature resistance (PE-RT) ù Part 1: General First Edition Plastics piping systems for hot and cold water installations ù Polyethylene of raised temperature resistance (PE-RT) ù Part 2: Pipes First edition Plastics piping systems for hot and cold water installations ù Polyethylene of raised temperature resistance (PE-RT) ù Part 3: Fittings First edition Plastics piping systems for hot and cold water installations ù Polyethylene of raised temperature resistance (PE-RT) ù Part 5: Fitness for purpose of the system First edition Paper Cut-size office paper Measurement of edge quality First Edition Transportable gas cylinders Inspection and maintenance of cylinder valves First Edition Gas cylinders ù Cylinder valves with integrated pressure regulators ù Specification and type testing First Edition Ships and marine technology Guidelines for the operation and installation of voyage data recorders (VDR) First Edition Geotechnical investigation and testing Sampling methods and groundwater measurements Part 1: Technical principles for execution First Edition Geotechnical investigation and testing Field testing Part 2: Dynamic probing First Edition Water quality Determination of certain explosives and related compounds Method using high-performance liquid chromatography (HPLC) with UV detection First Edition Microbeam analysis Electron probe microanalysis Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy First Edition

ISO ISO ISO ISO

22498 22522 22523 22533

Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving First Edition Crop protection equipment ù Field measurement of spray distribution in tree and bush crops First edition External limb prostheses and external orthoses Requirements and test methods First Edition Information technology Data interchange on 90 mm optical disk cartridges Capacity: 2,3 Gbytes per cartridge First Edition

ISO

22534

ISO ISO ISO

22535 22537 22538-1

Information technology Telecommunications and information exchange between systems Application session services First edition Information technology Telecommunications and information exchange between systems Corporate Telecommunication Networks Tunnelling of QSIG over SIP Second edition Information technology ECMAScript for XML (E4X) specification First Edition Space systems - Oxygen safety - Part 1: Design of oxygen systems and components First Edition

ISO

22538-2

Space systems ù Oxygen safety ù Part 2: Selection of metallic materials for oxygen systems and components First Edition

ISO ISO ISO ISO

22538-3 22538-4 22554 22555

ISO

22608

ISO

22609

ISO ISO ISO ISO ISO

22610 22612 22628 22641 22642

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

22643 22644 22645 22646 22647 22649 22650 22651 22652 22653 22654

ISO ISO ISO ISO ISO ISO ISO

22662 22663 22664 22666 22667 22669 22670

Space systems ù Oxygen safety ù Part 3: Selection of non-metallic materials for oxygen systems and components First Edition Space systems - Oxygen safety - Part 4: Hazards analyses for oxygen systems and components First Edition Ships and marine technology ù Propeller shaft revolution indicators ù Electric type and electronic type First Edition Ships and marine technology ù Propeller pitch indicators First Edition Protective clothing Protection against liquid chemicals Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials First Edition Clothing for protection against infectious agents Medical face masks Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected) First Edition Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment Test method to determine the resistance to wet bacterial penetration First edition Clothing for protection against infectious agents Test method for resistance to dry microbial penetration First edition Road Vehicles - Recyclability and Recoverability - Calculation Method First Edition Space data and information transfer systems - TM (telemetry) synchronization and channel coding First Edition Space data and information transfer systems - TC (telecommand) synchronization and channel coding First Edition Space Data and Information Transfer Systems - Data Entity Dictionary Specification Language (DEDSL) - XML/DTD Syntax First Edition Space data and information transfer systems Orbit data messages First Edition Space data and information transfer systems - TM (telemetry) space data link protocol First Edition Space data and information transfer systems Space packet protocol First Edition Space data and information transfer systems Space link identifiers First Edition Footwear Test methods for insoles and insocks Water absorption and desorption First Edition Footwear - Test Methods for Whole Shoe - Heel Attached First Edition Footwear - Test Methods for Insoles - Dimensional Stability First Edition Footwear - Test Methods for Insoles, Lining and Insocks - Perspiration Resistance First Edition Footwear Test methods for lining and insocks Static friction First Edition Footwear - Test Methods for Outsoles - Tensile Strength and Elongation First Edition Milk and milk products ù Determination of lactose content by high-performance liquid chromatography (Reference method) First Edition Space data and information transfer systems Proximity-1 space link protocol Data link layer First Edition Space data and information transfer systems - TC (telecommand) space data link protocol First Edition Space data and information transfer systems ù AOS (advanced orbiting systems) space data link protocol Second Edition Space data and information transfer systems - Communication operations Procedure-1 First Edition Space data and information transfer systems ù Space link extension (SLE) ù Return-all-frames service Second Edition Space data and information transfer systems Space link extension (SLE) Return-channel-frames service First edition

Space data and information transfer systems ù Space link extension (SLE) ù Forward communications link transmission unit (CLTU) service Second edition Space data and information transfer systems Space link extension (SLE) Forward space packet service First Edition Dentistry Metallic materials for fixed and removable restorations and appliances First Edition [Superseded: ISO 1562, ISO 1562, ISO 6871-1, ISO 6871-1, ISO 6871-2, ISO 6871-2, ISO 8891, ISO 8891, ISO 16744] Prosthetics Testing of ankle-foot devices and foot units Requirements and test methods First Edition Utility lighters General consumer-safety requirements First Edition Cosmetics Packaging and labelling First Edition Cosmetics Microbiology Detection of Pseudomonas aeruginosa First Edition Cosmetics - Microbiology - Detection of Staphylococcus aureus First Edition Conveyor belts ù Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining First Edition Packaging Linear bar code and twodimensional symbols for product packaging First Edition

ISO ISO

22671 22672

ISO ISO ISO ISO ISO ISO

22674 22675 22702 22715 22717 22718

ISO ISO

22721 22742

ISO ISO ISO ISO

22743 CORR 1 22743 22762-1 CORR 1 22762-1

ISO ISO

22762-2 CORR 1 22762-2

ISO ISO ISO ISO ISO ISO

22762-3 CORR 1 22762-3 22763 22768 22774 22775

ISO

22776

Footwear Test methods for accessories: Touch and close fasteners Shear strength before and after repeated closing First Edition

ISO

22777

Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing First Edition

ISO ISO

22778 22779

Metallic coatings Physical vapour-deposited coatings of cadmium on iron and steel Specification and test methods First Edition Metallic coatings Physical vapour-deposited coatings of aluminium Specification and test methods First Edition

Water quality ù Determination of sulfates ù Method by continuous flow analysis (CFA) ù TECHNICAL CORRIGENDUM 1 First Edition Water quality Determination of sulfates Method by continuous flow analysis (CFA) First Edition Elastomeric seismic-protection isolators ù Part 1: Test methods TECHNICAL CORRIGENDUM 1 First Edition Elastomeric seismic-protection isolators ù Part 1: Test methods First Edition Elastomeric seismic-protection isolators ù Part 2: Applications for bridges ù Specifications TECHNICAL CORRIGENDUM 1 First Edition Elastomeric seismic-protection isolators ù Part 2: Applications for bridges ù Specifications First Edition Elastomeric seismic-protection isolators ù Part 3: Applications for buildings ù Specifications TECHNICAL CORRIGENDUM 1 First Edition Elastomeric seismic-protection isolators ù Part 3: Applications for buildings ù Specifications First Edition Equipment for crop protection Sprayers Demonstration track for field crop sprayers First Edition Rubber, raw Determination of the glass transition temperature by differential scanning calorimetry (DSC) First Edition Footwear Test methods for accessories: shoe laces Abrasion resistance First Edition Footwear Test methods for accessories: Metallic accessories Corrosion resistance First Edition

ISO

22794

ISO

22803

ISO

22825

ISO

22826

ISO

22827-1

ISO

22827-2

ISO

22829

ISO ISO ISO

22846-1 22857 22866

ISO

22867 CORR 1

ISO

22867

ISO ISO

22868 22870

ISO ISO ISO ISO ISO ISO

22877 22878 22879 22880 22881 22882

ISO ISO ISO

22883 22884 22891

Dentistry ù Implantable materials for bone filling and augmentation in oral and maxillofacial surgery ù Contents of a technical file First Edition Dentistry Membrane materials for guided tissue regeneration in oral and maxillofacial surgery Contents of a technical file First Edition Non-destructive testing of welds Ultrasonic testing Testing of welds in austenitic steels and nickel-based alloys First Edition Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) First Edition Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly First Edition Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 2: Moving mechanism First Edition Resistance welding ù Transformerrectifier for welding guns with integrated transformers ù Transformer-rectifier units operating at 1 000 Hz frequency First edition Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work First Edition Health informatics Guidelines on data protection to facilitate trans-border flows of personal health information First Edition Equipment for crop protection - Methods for field measurement of spray drift First Edition Forestry machinery ù Vibration test code for portable hand-held machines with internal combustion engine ù Vibration at the handles TECHNICAL CORRIGENDUM 1 First Edition Forestry machinery ù Vibration test code for portable hand-held machines with internal combustion engine ù Vibration at the handles First Edition [Replaced: ISO 7505, ISO 7916] Forestry machinery Noise test code for portable hand-held machines with internal combustion engine Engineering method (Grade 2 accuracy) First Edition; Replaces ISO 7182: 1984; ISO 7917: 1987; ISO 9207: 1995; ISO 10884: 1995 Point-of-care testing (POCT) Requirements for quality and competence First Edition Castors and wheels Vocabulary, symbols and multilingual terminology Roues et roulettes Vocabulaire, symboles et terminologie multilingue First Edition Castors and wheels Test methods and apparatus First Edition Castors and wheels Requirements for castors for furniture First Edition Castors and wheels Requirements for castors for swivel chairs First Edition Castors and wheels Requirements for use on manually propelled equipment for institutional applications First Edition Castors and wheels Requirements for castors for hospital beds First Edition Castors and wheels Requirements for applications up to 1,1 m/s (4 km/h) First Edition; ISO 22883 Replaces ISO 2175:1981, ISO 2184-1:1972, ISO 3101:1981 and ISO 3102:1981 Castors and wheels Requirements for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h) First Edition Paper ù Determination of transmittance by diffuse reflectance measurement First Edition

ISO ISO ISO ISO ISO ISO

22892 22896 22897 22902-1 22902-2 22902-3

Soil quality Guidelines for the identification of target compounds by gas chromatography and mass spectrometry First Edition Road vehicles Deployment and sensor bus for occupant safety systems First Edition Glass in building Glazing and airborne sound insulation Product descriptions and determination of properties First Edition Road vehicles Automotive multimedia interface Part 1: General technical overview First edition Road vehicles Automotive multimedia interface Part 2: Use cases First Edition Road vehicles Automotive multimedia interface Part 3: System requirements First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

22902-4 22902-5 22902-6 22902-7 22917 22958 22965-1 22965-2 22972 22977 22986

Road vehicles Automotive multimedia interface Part 4: Network protocol requirements for vehicle interface access First Edition Road vehicles Automotive multimedia interface Part 5: Common message set First Edition Road vehicles Automotive multimedia interface Part 6: Vehicle interface requirements First Edition Road vehicles Automotive multimedia interface Part 7: Physical specification First Edition Superabrasives Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride First Edition Textiles Water resistance Rain tests: exposure to a horizontal water spray First Edition Concrete ù Part 1: Methods of specifying and guidance for the specifier First Edition Concrete ù Part 2: Specification of constituent materials, production of concrete and compliance of concrete First Edition Essential oils Analysis by gas chromatography on chiral capillary columns General method First Edition Road vehicles M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing First Edition Cranes ù Stiffness ù Bridge and gantry cranes First Edition

ISO

22991

ISO

23000-2

ISO ISO ISO ISO

23000-3 23001-1 CORR 2 23001-1 TECH CORR 23001-1

ISO

23001-1 FDAM 1

ISO ISO ISO ISO

23002-1 23003-1 23004-1 23004-3

Gas cylinders Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) Design and construction First Edition Information technology Multimedia application format (MPEG-A) Part 2: MPEG music player application format First Edition Information technology ù Multimedia application format (MPEG-A) ù Part 3: MPEG photo player application format First Edition Information technology ù MPEG systems technologies ù Part 1: Binary MPEG format for XML First Edition Information technology MPEG systems technologies Part 1: Binary MPEG format for XML First Edition Information technology MPEG systems technologies Part 1: Binary MPEG format for XML First Edition Information technology ù MPEG systems technologies ù Part 1: Binary MPEG format for XML AMENDMENT 1: Conformance and reference software Information technology MPEG video technologies Part 1: Accuracy requirements for implementation of integer-output 8Î8 inverse discrete cosine transform First Edition Information technology ù MPEG audio technologies ù Part 1: MPEG Surround First Edition Information technology ù Multimedia Middleware ù Part 1: Architecture First Edition Information technology ù Multimedia Middleware ù Part 3: Component model First Edition

ISO

23004-4

ISO ISO ISO ISO

23026 23038 23058 23079

ISO ISO

23145-1 23181

ISO ISO

23202 23205

ISO ISO ISO

23206 CORR 1 23206 23208

ISO

23251 CORR 1

ISO ISO ISO ISO

23251 23270 23271 23273-1

ISO ISO

23273-2 23273-3

ISO

23274

ISO

23275-1

ISO ISO ISO ISO

23275-2 23277 23278 23279

Information technology ù Multimedia Middleware ù Part 4: Resource and quality management First Edition Software Engineering Recommended Practice for the Internet Web Site Engineering, Web Site Management, and Web Site Life Cycle First Edition; IEEE Std 2001: 2002 Space systems Space solar cells Electron and proton irradiation test methods First Edition Milk and milk products Ovine and caprine rennets Determination of total milk-clotting activity First Edition; IDF 199 Magnesium and magnesium alloys Returns Requirements, classification and acceptance First edition Fine ceramics (advanced ceramics, advanced technical ceramics) ù Determination of bulk density of ceramic powders ù Part 1: Tap density First Edition Hydraulic fluid power ù Filter elements ù Determination of resistance to flow fatigue using high viscosity fluid First edition Aluminium oxide used for the production of aluminium Determination of particles passing a 20 micrometre aperture sieve First Edition Agricultural tractors Instructional seat First Edition Agricultural wheeled tractors and attachments ù Front loaders ù Carriages for attachments TECHNICAL CORRIGENDUM 1 First edition Agricultural wheeled tractors and attachments Front loaders Carriages for attachments First edition Cryogenic vessels Cleanliness for cryogenic service First Edition Petroleum, petrochemical and natural gas industries ù Pressure-relieving and depressuring systems TECHNICAL CORRIGENDUM 1 First Edition Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems First Edition * Corrected Version 10/01/2006 Information Technology - C# Language Specification First Edition Information technology Common Language Infrastructure (CLI) Partitions I to VI Second Edition Fuel cell road vehicles Safety specifications Part 1: Vehicle functional safety First Edition Fuel cell road vehicles Safety specifications Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen First Edition Fuel cell road vehicles Safety specifications Part 3: Protection of persons against electric shock First Edition Hybrid-electric road vehicles ù Exhaust emissions and fuel consumption measurements ù Non-externally chargeable vehicles First Edition Animal and vegetable fats and oils Cocoa butter equivalents in cocoa butter and plain chocolate Part 1: Determination of the presence of cocoa butter equivalents First Edition Animal and vegetable fats and oils Cocoa butter equivalents in cocoa butter and plain chocolate Part 2: Quantification of cocoa butter equivalents First Edition Non-destructive testing of welds Penetrant testing of welds Acceptance levels First Edition Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels First Edition Non-destructive testing of welds ù Ultrasonic testing ù Characterization of indications in welds First Edition

ISO

23289

ISO ISO ISO

23290 23309 23317

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

23328-1 23328-2 23360-1 23360-2 23360-3 23360-4 23360-5 23360-6 23360-7 23360-8 23391 23392 23393 23394 23429 23469

ISO ISO

23470 23509

ISO ISO ISO

23529 23539 23550

ISO

23551-1

ISO

23551-2

ISO

23551-3

Information technology Telecommunications and information exchange between systems Corporate telecommunication networks Signalling interworking between QSIG and H.323 Basic services First Edition Information technology Telecommunications and information exchange between systems Private Integrated Services Network Mapping functions for the tunnelling of QSIG through H.323 networks Second Edition Hydraulic fluid power systems ù Assembled systems ù Methods of cleaning lines by flushing First Edition Implants for surgery ù In vitro evaluation for apatite-forming ability of implant materials First edition Breathing system filters for anaesthetic and respiratory use Part 1: Salt test method to assess filtration performance First Edition Breathing System Filters for Anaesthetic and Respiratory Use - Part 2: Non-Filtration Aspects First Edition Linux Standard Base (LSB) core specification 3.1 ù Part 1: Generic specification First Edition Linux Standard Base (LSB) core specification 3.1 ù Part 2: Specification for IA32 architecture First Edition Linux Standard Base (LSB) core specification 3.1 ù Part 3: Specification for IA64 architecture First Edition Linux Standard Base (LSB) core specification 3.1 ù Part 4: Specification for AMD64 architecture First Edition Linux Standard Base (LSB) core specification 3.1 ù Part 5: Specification for PPC32 architecture First Edition Linux Standard Base (LSB) core specification 3.1 Part 6: Specification for PPC64 architecture First Edition Linux Standard Base (LSB) core specification 3.1 Part 7: Specification for S390 architecture First Edition Linux Standard Base (LSB) core specification 3.1 Part 8: Specification for S390X architecture First Edition Dried rosehips Specification and test methods First Edition Fresh and quick-frozen maize and peas Determination of alcohol-insoluble solids content First Edition Pomegranate fruit Specification and test methods First Edition Dried oleaster Specification and test methods First Edition Gauging of hexagon sockets First Edition Bases for design of structures Seismic actions for designing geotechnical works First Edition Soil quality ù Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution First Edition Bevel and hypoid gear geometry First Edition Rubber General procedures for preparing and conditioning test pieces for physical test methods First Edition; Replaces ISO 471:1995, ISO 3383:1985, ISO 4648:1991, ISO 4661-1:1993 Photometry - The CIE system of physical photometry First Edition; CIE S 010/E Safety and control devices for gas burners and gas-burning appliances General requirements First Edition Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic valves First edition Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 2: Pressure regulators First edition Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 3: Gas/air ratio controls, pneumatic type First edition

ISO

23551-4

ISO ISO

23553-1 23559

ISO

23570-1

ISO

23570-2

ISO

23570-3

ISO ISO

23603 23611-1

ISO ISO

23611-2 23611-3

ISO ISO

23631 23651

ISO ISO

23667 23671

ISO ISO ISO ISO

23711 23713 23714 23717

ISO ISO

23718 23733

ISO

23747

ISO

23753-1

Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for automatic shut-off valves First Edition Safety and control devices for oil burners and oil-burning appliances ù Particular requirements ù Part 1: Shut-off devices for oil burners First Edition Plastics ù Film and sheeting ù Guidance on the testing of thermoplastic films First Edition Industrial automation systems and integration Distributed installation in industrial applications Part 1: Sensors and actuators First Edition Industrial automation systems and integration Distributed installation in industrial applications Part 2: Hybrid communication bus First Edition Industrial automation systems and integration Distributed installation in industrial applications Part 3: Power distribution bus Syst×mes d'automatisation industrielle et intÚgration Installation distribuÚe dans les applications industrielles Partie 3: Bus de distribution d'Únergie First Edition Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour First Edition; CIE S 012/E Soil quality Sampling of soil invertebrates Part 1: Hand-sorting and formalin extraction of earthworms First Edition Soil quality Sampling of soil invertebrates Part 2: Sampling and extraction of micro-arthropods (Collembola and Acarina) First Edition Soil quality ù Sampling of soil invertebrates ù Part 3: Sampling and soil extraction of enchytraeids First Edition Water quality Determination of dalapon, trichloroacetic acid and selected haloacetic acids Method using gas chromatography (GCECD and/or GC-MS detection) after liquid-liquid extraction and derivatization First Edition Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording AIT-3 format Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing First Edition Passenger car tyres Method for measuring relative wet grip performance Loaded new tyres First Edition Elastomeric seals Requirements for materials for pipe joint seals used in water and drainage applications Thermoplastic elastomers First Edition Pulps - Determination of fibre coarseness by automated optical analysis - Polarized light method First Edition Pulps ù Determination of water retention value (WRV) First Edition Steel wire and wire products Hose reinforcement wire First Edition Metallic materials - mechanical testing - vocabulary MatÚriaux mÚtalliques ù Essais mÚcaniques ù Vocabulaire First Edition [Superseded: ISO TR 12735-1] Textiles ù Chenille yarns ù Test method for the determination of linear density First edition Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans First Edition Soil quality Determination of dehydrogenase activity in soils Part 1: Method using triphenyltetrazolium chloride (TTC) First Edition

ISO ISO ISO ISO

23753-2 23794 23813 23815-1

ISO ISO ISO

23833 23853 23874

ISO

23912

ISO

23913

ISO

23915

ISO

23916

ISO

23917

ISO

23933

ISO

23935

ISO

23950

ISO

23953-1

ISO

23953-2

ISO

23988

ISO ISO

24013 24014-1

Soil quality Determination of dehydrogenase activity in soils Part 2: Method using iodotetrazolium chloride (INT) First Edition Rubber, vulcanized or thermoplastic Abrasion testing Guidance First Edition Cranes ù Training of appointed persons First Edition Cranes ù Maintenance ù Part 1: General First Edition Microbeam analysis Electron probe microanalysis (EPMA) Vocabulary Analyse par microfaisceaux Analyse par microsonde Úlectronique (microsonde de Castaing) Vocabulaire First Edition Cranes Training of slingers and signallers First Edition Natural gas Gas chromatographic requirements for hydrocarbon dewpoint calculation First Edition Information technology 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD Recordable Disk (DVD-R) First Edition Water quality Determination of chromium(VI) Method using flow analysis (FIA and CFA) and spectrometric detection First Edition Information technology Telecommunications and information exchange between systems Corporate Telecommunication Networks Signalling Interworking between QSIG and SIP Call Diversion First Edition Information technology Telecommunications and information exchange between systems Corporate Telecommunication Networks Signalling Interworking between QSIG and SIP Call Transfer First Edition Information technology Telecommunications and information exchange between systems NFCIP-1 Protocol Test Methods First Edition Aerospace Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 ░C/20 684 kPa (275 ░F/3 000 psi) and 135 ░C/21 000 kPa (275 ░F/3 046 psi) Procurement specification First Edition Aircraft Environmental test procedures for airborne fluid system components Resistance to fire in designated fire zones First Edition Information and Documentation - Information Retrieval (Z39.50) - Application Service Definition and Protocol Specification First Edition Refrigerated display cabinets Part 1: Vocabulary Meubles frigorifiques de vente Partie 1: Vocabulaire First Edition; Together with ISO 23953-2, Replaces ISO 1992-1: 1974, ISO 1992-4: thru ISO 1992-6:1974, ISO 5160-1:1979 and ISO 5160-2:1980 Refrigerated display cabinets - Part 2: Classification, requirements and test conditions First Edition; Together with ISO 23953-1 Replaces ISO 1992-1: 1974, ISO 1992-4:1974 thru ISO 1992-6:1974, ISO 5160-1:1979 and ISO 5160-2:1980 Information technology ù A code of practice for the use of information technology (IT) in the delivery of assessments First edition Optics and photonics Lasers and laser-related equipment Measurement of phase retardation of optical components for polarized laser radiation First Edition Public transport ù Interoperable fare management system ù Part 1: Architecture First Edition

ISO ISO ISO ISO ISO

24033 24034 24134 24135-1 24214

ISO

24234

ISO ISO ISO

24235 24236 24237

ISO ISO ISO ISO ISO

24276 24314 24334 24335 24336

ISO ISO

24337 24338

ISO ISO ISO

24339 24340 24341

ISO

24342

ISO ISO ISO

24343-1 24345 24346

ISO

24347

ISO

24369

Pipes made of raised-temperatureresistance polyethylene (PE-RT) Effect of time and temperature on the expected strength First Edition Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification First Edition Industrial trucks Additional requirements for automated functions on trucks First Edition Industrial trucks Specifications and test methods for operator restraint systems Part 1: Lap-type seat belts First Edition Skin barrier for ostomy aids Vocabulary First Edition Dentistry Mercury and alloys for dental amalgam First Edition; Replaces ISO 1559:1995 and ISO 1560:1985 [Replaced: ISO 1560] Fine ceramics (advanced ceramics, advanced technical ceramics) ù Determination of particle size distribution of ceramic powders by laser diffraction method First edition Surface chemical analysis Auger electron spectroscopy Repeatability and constancy of intensity scale First edition Surface chemical analysis X-ray photoelectron spectroscopy Repeatability and constancy of intensity scale First edition Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products General requirements and definitions First Edition Structural steels Structural steels for building with improved seismic resistance Technical delivery conditions First Edition Laminate floor coverings Determination of locking strength for mechanically assembled panels First Edition Laminate floor coverings Determination of impact resistance First Edition Laminate floor coverings Determination of thickness swelling after partial immersion in water First edition Laminate floor coverings Determination of geometrical characteristics RevÛtements de sol stratifiÚs DÚtermination des caractÚristiques gÚomÚtriques First Edition Laminate floor coverings Determination of abrasion resistance First Edition Laminate and textile floor coverings Determination of dimensional variations after exposure to humid and dry climate conditions First Edition Resilient floor coverings Determination of thickness of layers First Edition Resilient and textile floor coverings - Determination of length, width and straightness of sheet First Edition Resilient and textile floor-coverings ù Determination of side length, edge straightness and squareness of tiles Second Edition [Cancelled: ISO 13747] Resilient and laminate floor coverings ù Determination of indentation and residual indentation ù Part 1: Residual indentation First Edition Resilient floor coverings Determination of peel resistance First Edition Resilient floor coverings Determination of overall thickness First Edition Agricultural vehicles Mechanical connections between towed and towing vehicles Dimensions of ball-type coupling device (80 mm) First Edition Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of content of coarse particles in ceramic powders by wet sieving method First Edition

ISO

24370

ISO ISO

24408 24410

ISO ISO ISO

24431 24450 24490

ISO

24531

ISO ISO

24535 24537

ISO ISO ISO ISO ISO ISO ISO

24570 24610-1 24700 24702 24703 24707 FDIS 24707

ISO

24709-1

ISO

24709-2

ISO ISO

24711 24712

ISO

24723

ISO ISO

24724 24727-1

ISO

24728

Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method First edition Ships and marine technology Position-indicating lights for life-saving appliances Testing, inspection and marking of production units First Edition Earth-moving machinery Coupling of attachments to skid steer loaders First edition Gas cylinders Cylinders for compressed and liquefied gases (excluding acetylene) Inspection at time of filling First Edition; Supersedes ISO 10463:1993 and ISO 11113:1995, Laboratory glassware Wide-necked boiling flasks First Edition Cryogenic vessels Pumps for cryogenic service First edition Intelligent transport systems - System architecture, taxonomy and terminology - Using XML in ITS standards, data registries and data dictionaries Intelligent transport systems ù Automatic vehicle identification ù Basic electronic registration identification (Basic ERI) First Edition Micrographics ù Dimensions for reels used for 16 mm and 35 mm microfilm First Edition Software engineering NESMA functional size measurement method version 2.1 Definitions and counting guidelines for the application of Function Point Analysis First Edition Language resource management Feature structures Part 1: Feature structure representation First Edition Quality and performance of office equipment that contains reused components First Edition Information technology û Generic cabling û Industrial premises First Edition Information technology Participant identifiers First Edition Information technology - Common Logic (CL): a framework for a family of logic-based languages First Edition Information technology - Common Logic (CL): a framework for a family of logic-based languages Information technology ù Conformance testing for the biometric application programming interface (BioAPI) ù Part 1: Methods and procedures first Edition Information technology ù Conformance testing for the biometric application programming interface (BioAPI) ù Part 2: Test assertions for biometric service providers First Edition Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components First Edition Colour test pages for measurement of office equipment consumable yield First Edition Information technology Automatic identification and data capture techniques EAN.UCC Composite bar code symbology specification First Edition Information technology - Automatic identification and data capture techniques - Reduced Space Symbology (RSS) bar code symbology specification First Edition Identification cards ù Integrated circuit card programming interfaces ù Part 1: Architecture First edition Information technology Automatic identification and data capture techniques MicroPDF417 bar code symbology specification First Edition

ISO ISO ISO ISO ISO

24730-1 24730-2 24738 24744 24775

ISO

24801-2

ISO

24801-3

Information technology Real-time locating systems (RTLS) Part 1: Application program interface (API) First Edition Information technology Real-time locating systems (RTLS) Part 2: 2,4 GHz air interface protocol First Edition Information technology Icon symbols and functions for multimedia link attributes First Edition Software Engineering ù Metamodel for Development Methodologies First Edition Information technology - Storage management First Edition Recreational diving services ù Safety related minimum requirements for the training of recreational scuba divers ù Part 2: Level 2 ù Autonomous diver First Edition Recreational diving services ù Safety related minimum requirements for the training of recreational scuba divers ù Part 3: Level 3 ù Dive leader First Edition

ISO

24802-1

Recreational diving services ù Safety related minimum requirements for the training of scuba instructors ù Part 1: Level 1 First Edition

ISO ISO ISO ISO ISO

24802-2 24803 24824-1 24824-2 25000

Recreational diving services ù Safety related minimum requirements for the training of scuba instructors ù Part 2: Level 2 First Edition Recreational diving services ù Requirements for recreational scuba diving service providers First Edition Information technology ù Generic applications of ASN.1: Fast Infoset First Edition Information technology Generic applications of ASN.1: Fast Web Services First Edition Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Guide to SQuaRE First Edition

ISO

25001

ISO

25020

Software engineering ù Software product Quality Requirements and Evaluation (SQuaRE) ù Planning and management First Edition Software engineering ù Software product Quality Requirements and Evaluation (SQuaRE) ù Measurement reference model and guide First Edition

ISO

25030

ISO

25051 CORR 1

ISO

25051

ISO

25062

ISO ISO ISO

25434 25435 25436

ISO

25437

Software engineering ù Software product Quality Requirements and Evaluation (SQuaRE) ù Quality requirements First Edition Software engineering ù Software product Quality Requirements and Evaluation (SQuaRE) ù Requirements for quality of Commercial Off-The-Shelf (COTS) software product and instructions for testing TECHNICAL CORRIGENDUM 1 First Edition Software engineering Software product Quality Requirements and Evaluation (SQuaRE) Requirements for quality of Commercial OffThe-Self (COTS) software product and instructions for testing First Edition Software engineering Software product Quality Requirements and Evaluation (SQuaRE) Common Industry Format (CIF) for usability test reports First Edition Information technology ù Data interchange on 120 mm and 80 mm optical disk using +R DL format ù Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed up to 8x) Second Edition Data Interchange on 60 mm Read-Only ODC Capacity: 1,8 Gbytes (UMDTM) First Edition Information technology Eiffel: Analysis, Design and Programming Language First Edition Information technology Telecommunications and information exchange between systems WS-Session Web Services for Application Session Services First Edition

ISO ISO ISO ISO ISO ISO

25539-1 AMD 1 25539-1 26202 26300 26702 26908

Cardiovascular implants ù Endovascular devices ù Part 1: Endovascular prostheses AMENDMENT 1: Test methods First Edition Cardiovascular Implants - Endovascular Devices - Part 1: Endovascular Prostheses First Edition Magnesium and magnesium alloys - Magnesium alloys for cast anodes First Edition Information technology Open Document Format for Office Applications (OpenDocument) v1.0 First Edition Systems engineering - Application and management of the systems engineering process First Edition Information technology ù MAC-PHY Interface for ISO/IEC 26907 First Edition

ISO

26143

ISO ISO ISO

26925 27001 27002

ISO ISO

27006 28000

ISO ISO

28003 28077

Space data and information transfer systems ù Space link extension (SLE) ù Return operational control fields service First Edition Information technology Digital storage media for information interchange Data Interchange on 120 mm and 80 mm Optical Disk using +RW HS Format Capacity: 4,7 and 1,46 Gbytes per Side (Recording speed 8X) First Edition Information technology - Security techniques - Information security management systems - Requirements First Edition Information technology ù Security techniques ù Code of practice for information security management First Edition Information technology ù Security techniques ù Requirements for bodies providing audit and certification of information security management systems First Edition Specification for security management systems for the supply chain First Edition [Cancelled: ISO PAS 28000] Security management systems for the supply chain - Requirements for bodies providing audit and certification of supply chain security management systems First Edition [Cancelled: ISO PAS 28003] Photocarcinogenesis action spectrum (non-melanoma skin cancers) First Edition; CIE S 019/E

ISO

28360

ISO

28361

ISO

42010

ISO

61340-4-4

ISO ISO ISO

80000-3 80000-4 80000-5

ISO

80000-8

Quantities and units Part 3: Space and time First Edition; Replaces ISO 31-1:1992 and ISO 31-2:1992 [Replaced: ISO 31-2] Quantities and units Part 4: Mechanics First edition;:1992 [Replaced: ISO 31-3] Quantities and units ù Part 5: Thermodynamics First edition [Superseded: ISO 31-4] Quantities and units ù Part 8: Acoustics ***SDO SENDING CORRECTED PDF*** UNAVAILABLE UNTIL THEN *** First Edition [Replaced: ISO 31-7]

ISO

80416-2

Basic Principles for Graphical Symbols for Use on Equipment - Part 2: Form and Use of Arrows First Edition; Replaces ISO 4196

Information technology ù Office equipment ù Determination of chemical emission rates from electronic equipment First Edition Information technology ù Telecommunications and information exchange between systems ù Near Field Communication Wired Interface (NFC-WI) First Edition Systems and software engineering ù Recommended practice for architectural description of software-intensive systems First Edition Electrostatics û Part 4-4: Standard test methods for specific applications û Electrostatic classification of flexible intermediate bulk containers (FIBC) Electrostatique û Partie 4-4: MÚthodes d'essai normalisÚes pour des applications spÚcifiques û Classification Úlectrostatique des grands rÚcipients pour vrac souples (GRVS) First Edition

ISO ISO ISO

80416-4 81400-4 CORR 1 81400-4

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

81714-1 82045-5 90003 CIE 10527 DGUIDE 76 DGUIDE 77-1 DGUIDE 77-2 DGUIDE 77-3 DGUIDE 78 DGUIDE 98-1

ISO

DGUIDE 99999.2

ISO ISO ISO ISO ISO

DIS 6983-1 DIS 7501-1 7501-1 DIS 8573-2 DIS 10218

ISO

DIS 10303-28

ISO

DIS 10303-59

ISO

DIS 10303-219

ISO

DIS 10303-223

ISO ISO ISO ISO

DIS 10303-240 DIS 10414-2 DIS 10416 DIS 10779

Basic principles for graphical symbols for use on equipment - Part 4: Guidelines for the adaptation of graphical symbols for use on screens and displays (icons) First Edition Wind turbines ù Part 4: Design and specification of gearboxes TECHNICAL CORRIGENDUM 1 First Edition Wind turbines ù Part 4: Design and specification of gearboxes First Edition Design of Graphical Symbols for Use in the Technical Documentation of Products - Part 1: Basic Rules First Edition; Replaces ISO/IEC 11714-1: 1996 Document management - Part 5: Application of metadata for the construction and facility management sector First Edition Software engineering Guidelines for the application of ISO 9001:2000 to computer software First Edition; CIE Standard Colorimetric Observers First Edition Development of service standards ù Recommendations for addressing consumer issues Guide for specification of product properties and classes Part 1: Fundamental benefits Guide for specification of product properties and classes Part 2: Technical principles and guidance Guide for specification of product properties and classes Part 3: Case studies Safety of machinery Rules for drafting and presentation of safety standards Uncertainty of measurement - Part 1: Introduction to the expression of uncertainty in measurement International vocabulary of basic and general terms in metrology (VIM) Vocabulaire international des termes fondamentaux et gÚnÚraux de mÚtrologie (VIM) Third Edition Industrial automation systems and integration Numerical control of machines Program format and definitions of address words Part 1: Data format for positioning, line motion and contouring control systems Identification cards ù Machine readable travel documents ù Part 1: Machine readable passport Identification Cards - Machine Readable Travel Documents - Part 1: Machine Readable Passport Fourth Edition Compressed air - Part 2: Test methods for aerosol oil content First Edition Robots for industrial environments Safety requirements Industrial automation systems and integration Product data representation and exchange Part 28: Implementation methods: XML representations of EXPRESS schemas and data Industrial automation systems and integration ù Product data representation and exchange ù Part 59: Integrated generic resource ù Quality of product shape data Industrial automation system Product data representation and exchange Part 219: Dimensional inspection information exchange Industrial automation systems and integration ù Product data representation and exchange ù Part 223: Application protocol: Exchange of design and manufacturing product information for cast parts Industrial automation systems and integration Product data representation and exchange Part 240: Application protocol: Process plans for machined products 2003 Petroleum and natural gas industries Field testing of drilling fluids Part 2: Oil-based fluids Petroleum and natural gas industries Drilling fluids Laboratory testing Office equipment accessibility guidelines for elderly persons and persons with disabilities

ISO ISO ISO ISO

DIS 10995 DIS 11002 DIS 12500-3 DIS 13623

ISO ISO

DIS 13624-1 DIS 13628-5

ISO

DIS 14649-12

ISO

DIS 17078-3

ISO

17343

ISO

DIS 17343

ISO ISO ISO

DIS 17344 DIS 19504 DIS 19901-3

ISO ISO ISO

DIS 19901-7 DIS 20815 DIS 20886

ISO

DIS 21809-3

ISO ISO ISO ISO

DIS 21992 DIS 23025 DIS 23360 DIS 23874

ISO

DIS 23936-1

ISO ISO ISO

DIS 25457 DIS 25961 DIS 26907

Information technology ù Test method for the estimation of the archival lifetime of optical media Information Technology ù SNIA Multipath Management API Specification Filters for compressed air ù Test methods ù Part 3: Particulates Petroleum and natural gas industries ù Pipeline transportation systems Petroleum and natural gas industries ù Drilling and production equipment ù Part 1: Design and operation of marine drilling riser equipment Petroleum and natural gas industries ù Design and operation of subsea production systems ù Part 5: Subsea umbilicals Industrial Automation Systems and Integration - Physical Device Control - Data Model for Computerized Numerical Controllers - Part 12: Process Data for Turning Petroleum and natural gas industries ù Drilling and production equipment ù Part 3: Running, pulling and kick-over tools, and latches for side-pocket mandrels Information technology Telecommunications and nformation exchange between systems Corporate telecommunication networks Signalling interworking between QSIG and SIP Basic services First Edition Information technology ù Corporate telecommunication networks ù Signalling interworking between QSIG and SIP ù Basic services Information technology Data interchange on 120 mm and 80 mm optical disk using +R format Capacity: 4,7 and 1,46 Gbytes per side (recording speed up to 8X) Information technology ù Open distributed processing ù Common Warehouse Metamodel Specification Version 1.1 Petroleum and natural gas industries ù Specific requirements for offshore structures ù Part 3: Topsides structure Petroleum and natural gas industries Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units Petroleum, petrochemical and natural gas industries Production assurance and reliability management Information technology International Security, Trust, and Privacy Alliance Privacy Framework Petroleum and natural gas industries ù External coatings for buried and submerged pipelines used in pipeline transportation systems ù Part 3: Field joint coatings Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network (PISN) - Mapping Functions for the Tunnelling of QSIG Through IP Networks Common Industry Format for Usability Test Reports Linux Standard Base Core Specification 2.0.1 Bib only Natural gas Gas chromatographic requirements for hydrocarbon dewpoint calculation Petroleum, petrochemical and natural gas industries ù Nonmetallic materials in contact with media related to oil and gas production ù Part 1: Thermoplastics Petroleum, petrochemical and natural gas industries ù Flare details for general refinery and petrochemical service [Superseded By: DS DSF/PREN ISO 25457] Recommended Practice for Architectural Description of Software-Intensive Systems High Rate Ultra Wideband PHY and MAC Standard

ISO

DIS 26926

ISO ISO ISO ISO ISO

DIS 28359 DIS 29361 DIS 29362 DIS 29363 DIS 29382

ISO ISO ISO ISO ISO

DIS 29642 DIS 29881 FDIS 7811-8 7812-2 FDIS 7816-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

7816-2 FDIS 9594-1 FDIS 9594-2 FDIS 9594-3 FDIS 9594-4 FDIS 9594-5 FDIS 9594-6 FDIS 9594-7 FDIS 9594-8 FDIS 9594-9

ISO

FDIS 9594-10

ISO ISO

FDIS 9973 FDIS 10414-1.2

ISO

10438-2

ISO

FDIS 10438-2

C++/CLI Language Specification Information technology Data interchange on 120 mm and 80 mm Optical Disk using +R DL Format Capacity: 8,55 and 2,66 Gbytes per Side (Recording speed up to 8x) Information technology Basic Profile Version 1.1 Information technology Attachments Profile Version 1.0 Information technology Simple SOAP Binding Profile Version 1.0 Corporate Governance of Information and Communication Technology Information technology ù Data interchange on 120 mm and 80 mm optical disk using +RW DL format ù Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4x) Information technology ù Software and systems engineering ù FiSMA 1.1 functional size measurement method Identification cards Recording technique Part 8: Magnetic stripe Coercivity of 51,7 kA/m (650 Oe) Identification cards ù Identification of issuers ù Part 2: Application and registration procedures Third Edition Identification cards ù Integrated circuit cards ù Part 2: Cards with contacts ù Dimensions and location of the contacts Information Technology - Identification Cards - Integrated Circuit(s) Cards with Contacts - Part 2: Dimensions and Location of the Contacts First Edition; Amendment 1: 06/01/2004 Information technology - Open Systems Interconnection - The Directory: Overview of concepts, models and services Information technology Open Systems Interconnection The Directory: Models Information technology Open Systems Interconnection The Directory: Abstract service definition Information technology Open Systems Interconnection The Directory: Procedures for distributed operation Information technology Open Systems Interconnection The Directory: Protocol specifications Information technology Open Systems Interconnection The Directory: Selected attribute types Information technology Open Systems Interconnection The Directory: Selected object classes Information technology Open Systems Interconnection The Directory: Public-key and attribute certificate frameworks Information technology Open Systems Interconnection The Directory: Replication Information technology Open Systems Interconnection The Directory: Use of systems management for administration of the Directory Information technology Computer graphics, image processing and environmental data representation Procedures for registration of items Petroleum and natural gas industries ù Field testing of drilling fluids ù Part 1: Water-based fluids Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 2: Specialpurpose oil systems First Edition Petroleum, petrochemical and natural gas industries ù Lubrication, shaft-sealing and control-oil systems and auxiliaries ù Part 2: Special-purpose oil systems

ISO

FDIS 10440-1

Petroleum, petrochemical and natural gas industries ù Rotary-type positivedisplacement compressors ù Part 1: Process compressors

ISO

10440-1

ISO ISO ISO ISO

FDIS 11694-5 FDIS 14165-251 FDIS 14165-321 FDIS 14165-331

ISO

FDIS 14543-3-1

ISO ISO ISO

FDIS 14649-111 FDIS 14776-121 FDIS 14776-322

ISO ISO ISO ISO ISO

15417 FDIS 15444-10 FDIS 15444-13 FDIS 15459-5 FDIS 15897

ISO

FDIS 15944-4

ISO

FDIS 15944-5

ISO

16388

ISO

16390

ISO ISO

FDIS 17078-2 FDIS 17613-1

ISO

FDIS 18000-7

ISO ISO ISO

18019 FDIS 19439 FDIS 19440

Petroleum and Natural Gas Industries - Rotary-Type Positive-Displacement Compressors - Part 1: Process Compressors (Oil-Free) First Edition Identification cards - Optical memory cards Part 5: Data format for information interchange for applications using ISO/IEC 11694-4, Annex B Information technology Fibre Channel Part 251: Framing and Signaling (FC-FS) Information technology Fibre Channel Part 321: Audio-Video (FC-AV) Information technology Fibre Channel Part 331: Virtual Interface (FC-VI) Information technology Home Electronic Systems (HES) Architecture Part 3-1: Communication layers Application layer for network based control of HES Class 1 Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 111: Tools for milling machines Information technology ù Small Computer System Interface (SCSI ù Part 121: Passive Interconnect Performance (PIP) Information technology Small Computer System Interface [SCSI] Part 322: SCSI Block Commands - 2 [SBC-2] Information technology - Automatic identification and data capture techniques - Code 128 bar code symbology specification - Second Edition Information technology ù JPEG 2000 image coding system: Extensions for three-dimensional data Information technology ù JPEG 2000 image coding system: An entry level JPEG 2000 encoder Information technology ù Unique identifiers ù Part 5: Unique identifier for returnable transport items (RTIs) Information technology - Procedures for registration of cultural elements Information technology ù Business Operational View ù Part 4: Business transaction scenarios ù Accounting and economic ontology Information technology ù Business Operational View Part 5: Identification and referencing of requirements of jurisdictional domains as sources of external constraints Information technology ù Automatic identification and data capture techniques ù Code 39 bar code symbology specification Second Edition Information technology ù Automatic identification and data capture techniques ù Interleaved 2 of 5 bar code symbology specification Second Edition Petroleum and natural gas industries ù Drilling and production equipment ù Part 2: Flow-control devices for side-pocket mandrels Manually operated pumps for drinking water Guidelines for selection and acceptance Part 1: Southeast Asia Information technology Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz Software and system engineering Guidelines for the design and preparation of user documentation for application software First Edition Enterprise integration Framework for enterprise modelling Enterprise integration ù Constructs for enterprise modelling

ISO

FDIS 19785-1.2

ISO ISO ISO

FDIS 19785-2.2 FDIS 19785-3 FDIS 19795-1

ISO ISO ISO ISO ISO ISO

FDIS 19796-1 FDIS 19902 FDIS 21000-2 FDIS 21000-14 FDIS 21630 FDIS 21771

ISO ISO ISO ISO ISO ISO ISO ISO

FDIS 21809-2 21827 FDIS 21827 FDIS 23002-3 FDIS 23004-2 FDIS 23004-4 FDIS 23874 FDIS 24738

ISO

FDIS 24739-1

ISO ISO ISO

FDIS 24751-1 FDIS 24755 FDIS 62264-2

ISO ISO ISO ISO

GUIDE 2 GUIDE 7 GUIDE 14 GUIDE 15

ISO

GUIDE 21-1

Information technology Common Biometric Exchange Formats Framework Part 1: Data element specification Information technology Common Biometric Exchange Formats Framework Part 2: Procedures for the operation of the Biometric Registration Authority Information technology ù Common Biometric Exchange Formats Framework ù Part 3: Patron format specifications Information technology Biometric performance testing and reporting Part 1: Principles and framework Information technology Learning, education and training Quality management, assurance and metrics Part 1: General approach Petroleum and Natural Gas Industries - Fixed steel offshore structures Information technology - Multimedia framework (MPEG-21) - Part 2: Digital Item Declaration Information technology ù Multimedia framework (MPEG-21) ù Part 14: Conformance Testing Pumps - Testing - Submersible mixers for wastewater and similar applications Gears ù Cylindrical involute gears and gear pairs ù Concepts and geometry Petroleum and natural gas industries ù External coatings for buried or submerged pipelines used in pipeline transportation systems ù Part 2: Fusion-bonded epoxy coatings Information Technology - Systems Security Engineering - Capability Maturity Model (SSE-CMM) First Edition Information technology ù Security techniques ù Systems Security Engineering ù Capability Maturity Model« (SSE-CMM«) Information technology - MPEG video technologies - Part 3: Representation of auxiliary video and supplemental information Information technology ù Multimedia Middleware ù Part 2: Multimedia application programming interface Information technology ù Multimedia Middleware ù Part 4: Resource and quality management Natural gas Gas chromatographic requirements for hydrocarbon dewpoint calculation Information technology Icon symbols and functions for multimedia link attributes First Edition Information technology ù AT Attachment with Packet Interface - 7 ù Part 1: Register Delivered Command Set, Logical Register Set (ATA/ATAPI-7 V1) Information technology Individualized adaptability and accessibility in e-learning, education and training Part 1: Framework and reference model Technologies de l'information AdaptabilitÚ et accessibilitÚ individualisÚes en e-apprentissage, en Úducation et en formation Partie 1: Cadre et mod×le de rÚfÚrence Information technology ù Screen icons and symbols for personal mobile communication devices Enterprise-control system integration Part 2: Model object attributes Standardization and Related Activities - General Vocabulary Normalisation et Activites Connexes - Vocabulaire General Eighth Edition Guidelines for Drafting of Standards Suitable for Use for Conformity Assessment Second Edition; SAA/SNZ HB18.7: 1994 Purchase information on goods and services intended for consumers Second Edition ISO/IEC Code of Principles onReference to Standards" First Edition" Regional or national adoption of International Standards and other International Deliverables Part 1: Adoption of International Standards First edition; ISO/IEC Guide 21-1, Together with ISO/IEC Guide 21-2 replaces ISO/IEC Guide 21:1999

ISO

GUIDE 21-2

ISO

GUIDE 23

ISO ISO ISO ISO ISO ISO

GUIDE 27 GUIDE 28 GUIDE 30 GUIDE 31 GUIDE 32 GUIDE 33

ISO ISO ISO ISO

GUIDE 34 GUIDE 35 GUIDE 37 GUIDE 41

ISO

GUIDE 43-1

ISO ISO ISO ISO ISO

GUIDE 43-2 GUIDE 46 GUIDE 47 GUIDE 50 GUIDE 51

ISO ISO ISO ISO ISO

GUIDE 53 GUIDE 59 GUIDE 60 GUIDE 63 GUIDE 64

ISO ISO ISO ISO

GUIDE 65 GUIDE 67 GUIDE 68 GUIDE 69

Regional or national adoption of International Standards and other International Deliverables Part 2: Adoption of International Deliverables other than International Standards First Edition; Together with ISO/IEC Guide 21-1 replaces ISO/IEC Guide 21:1999 Methods of Indicating Conformity with Standards for Third-Party Certification Systems First Edition; SANZ/SAA HB18.23: 1991 Guidelines for Corrective Action to Be Taken by a Certification Body in the Event of Misuse of Its Mark of Conformity First Edition; Corrected and Reprinted - 1983; SANZ/SAA HB18.27: 1991 Conformity assessment Guidance on a third-party certification system for products Second Edition Terms and Definitions Used in Connection with Reference Materials Second Edition Reference Materials - Contents of Certificates and Labels Second Edition Calibration in Analytical Chemistry and Use of Certified Reference Materials First Edition Uses of Certified Reference Materials Second Edition General Requirements for the Competence of Reference Material Producers Second Edition; TECHNICAL CORRIGENDUM 1: 11-152003 Reference materials - General and statistical principles for certification Third Edition Instructions for Use of Products of Consumer Interest Second Edition Packaging Recommendations for addressing consumer needs First Edition Proficiency Testing by Interlaboratory Comparisions - Part 1: Development and Operation of Laboratory Proficiency Testing Schemes Second Edition Proficiency Testing by Interlaboratory Comparisions - Part 2: Selection and Use of Proficiency Testing Schemes by laboratory Accreditation Bodies First Edition Comparative Testing of Consumer Products and Related Services - General Principles First Edition Presentation of Translations of ISO Publications First Edition Safety Aspects - Guidelines for Child Safety Second Edition Safety Aspects - Guidelines for Their Inclusion in Standards Second Edition Conformity assessment Guidance on the use of an organization┤s quality management system in product certification Second dition Code of Good Practice for Standardization First Edition Conformity assessment Code of good practice Second Edition Guide to the Development and Inclusion of Safety Aspects in International Standards for Medical Devices First Edition Guide for the Inclusion of Environmental Aspects in Product Standards First Edition General Requirements for Bodies Operating Product Certification Systems First Edition; Cancels and Replaces ISO/IEC Guide 40: 1983 Conformity assessment Fundamentals of product certification First Edition Arrangements for the Recognition and Acceptance of Conformity Assessment Results First Edition Harmonized Stage Code System (Edition 2) - Principles and Guidelines for Use First Edition

ISO ISO

GUIDE 71 GUIDE 72

Guidelines for Standards Developers to Address the Needs of Older Persons and Persons with Disabilities First Edition Guidelines for the Justification and Development of Management System Standards First Edition Risk Management - Vocabulary - Guidelines for Use in Standards Management du Risque - Vocabulair - Principes Directeurs Pour L'Utilisation dans Les Normes First Edition Graphical symbols Technical guidelines for the consideration of consumers needs First Edition Strategic principles for future IEC and ISO standardization in industrial automation First Edition Health informatics HL7 version 3 Reference information model Release 1 First Edition

ISO ISO ISO ISO

GUIDE 73 GUIDE 74 GUIDE 75 HL7 21731

ISO

ISO 4427-1

ISO

ISO 5398-4

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

ISO 22536 ISO/ASTM 51204 ISO/ASTM 51205 ISO/ASTM 51261 ISO/ASTM 51275 ISO/ASTM 51276 ISO/ASTM 51310 ISO/ASTM 51400 ISO/ASTM 51401 ISO/ASTM 51431 ISO/ASTM 51538 ISO/ASTM 51539 ISO/ASTM 51540 ISO/ASTM 51607 ISO/ASTM 51608

ISO

ISO/ASTM 51631

Plastics piping systems ù Polyethylene (PE) pipes and fittings for water supply ù Part 1: General First Edition [Replaced: ISO 4427] Leather ù Chemical determination of chromic oxide content ù Part 4: Quantification by inductively coupled plasma û optical emission spectrometer (ICP-OES) First Edition Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol (NFCIP-1) RF interface test methods First Edition Practice for dosimetry in gamma irradiation facilities for food processing Second Edition Practice for Use of Ceric-Cerous Sulfate Dosimetry System First Edition Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing First Edition Practice for use of a radiochromic film dosimetry system Second Edition Practice for use of a polymethylmethacrylate dosimetry system Second Edition Practice for use of a radiochromic optical waveguide dosimetry system Second Edition Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory Second Edition Practice for Use of a Dichromate Dosimetry System Second Edition Practice for dosimetry in electron beam and X-ray (bremsstrahlung) irradiation facilities for food processing Second Edition Practice for Use of the Ethanol-Chlorobenzene Dosimetry System First Edition Guide for use of radiation-sensitive indicators Second Edition Practice for use of a radiochromic liquid dosimetry system Second Edition Practice for use of an alanine-EPR dosimetry system Second Edition Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing Second Edition Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations Second Edition

ISO ISO ISO ISO

ISO/ASTM 51649 ISO/ASTM 51650 ISO/ASTM 51702 ISO/ASTM 51707

Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV Second Edition Practice for use of a cellulose triacetate dosimetry system Second Edition Practice for dosimetry in gamma irradiation facilities for radiation processing Second Edition Guide for estimating uncertainties in dosimetry for radiation processing Second Edition

ISO

ISO/ASTM 51818

Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies between 80 and 300 KeV First Edition

ISO

ISO/ASTM 51900 ISO/ASTM 51939 ISO/ASTM 51940 ISO/ASTM 51956 ISO/ASTM 52116 ISO/IEEE 1107310101 ISO/IEEE 1107310201

ISO

ISP 10607-1

ISO

ISP 10607-2

ISO

ISP 10607-3

ISO

ISP 10607-4

ISO

ISP 10607-5

ISO

ISP 10607-6

ISO

ISP 10608-1

ISO

ISP 10608-2

ISO

ISP 10608-4

ISO

ISP 10608-5

Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 4: Definition of Profile TA53, Operation over a Token Ring LAN Subnetwork First Edition Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 5: TA1111/TA1121 Profiles Including Subnetwork-Dependent Requirements for X.25 Packet-Switched Data Networks Using Virtual Calls First Edition; Amendment 1-1998

ISO

ISP 10608-6

Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 6: Definition of Profile TA54, Operation over an FDDI LAN Subnetwork First Edition

ISO ISO ISO ISO ISO ISO

Guide for Dosimetry in Radiation Research on Food and Agricultural Products First Edition Practice for blood irradiation dosimetry Second Edition Guide for dosimetry for sterile insect release programs Second Edition Practice for use of thermoluminescencedosimetry (TLD) systems for radiation processing Second edition Practice for dosimetry for a selfcontained dry-storage gamma-ray irradiator First Edition Health informatics Point-of-care medical device communication Part 10101: Nomenclature First Edition Health informatics Point-of-care medical device communication Part 10201: Domain information model First Edition Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 1: Specification of ACSE, Presentation and Session Protocols for the Use by FTAM Second Edition Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 2: Definition of Document Types, Constraint Sets and Syntaxes Second Edition Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 3: AFT11 Simple File Transfer Service (Unstructured) Second Edition Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 4: AFT12 Positional File Transfer Service (Flat) Second Edition Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 5: AFT22 Positional File Access Service (Flat) Second Edition Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 6: AFT3 - File Management Service Second Edition Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 1: General Overview and Subnetwork-Independent Requirements First Edition; Amendment 1-1998 Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 2: TA51 Profile Including Subnetwork-Dependent Requirements for CSMA/CD Local Area Networks (LANs) First Edition

ISO

ISP 10608-7

ISO

ISP 10608-8

ISO

ISP 10608-12

ISO

ISP 10608-13

ISO

ISP 10608-14

ISO

ISP 10609-1

ISO

ISP 10609-2

ISO

ISP 10609-3

ISO

ISP 10609-4

ISO

ISP 10609-5

ISO

ISP 10609-6

ISO

ISP 10609-7

ISO

ISP 10609-8

Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 7: Security Employing the Network Layer Security Protocol - Connectionless-Mode for TAnnnn Profiles First Edition Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 8: Security Employing the Network Layer Security Protocol - Connection-Mode with SDT-PDU Based Protection over X.25 Packet Switched Data Networks Using Virtual Calls, for TA1111/TA1121 Profiles First Edition Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 12: MAC Sublayer and Physical Layer Dependent Requirements for a CSMA/CD LAN Subnetwork First Edition Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 13: MAC Sublayer and Physical Layer Dependent Requirements for a Token Ring LAN Subnetwork First Edition Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 14: MAC, PHY and PMD Sublayer Dependent and Station Management Requirements over an FDDI LAN Subnetwork First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 1: Subnetwork-Type Independent Requirements for Group TB First Edition; AS/NZS 4170.1: 1994 Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 2: Subnetwork-Type Independent Requirements for Group TC First Edition; AS/NZS 4170.2: 1994 Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 3: Subnetwork-Type Independent Requirements for Group TD First Edition; AS/NZS 4170.3: 1994 Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 4: Subnetwork-Type Independent Requirements for Group TE First Edition; AS/NZS 4170.4: 1994 Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 5: Definition of Profiles TB1111/TB1121 First Edition; AS/NZS 4170.5: 1994 Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 6: Definition of Profiles TC1111/TC1121 First Edition; AS/NZS 4170.6: 1994 Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 7: Definition of Profiles TD1111/TD1121 First Edition; AS/NZS 4170-7: 1994 Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 8: Definition of Profiles TE1111/TE1121 First Edition; AS/NZS 4170.8: 1994

ISO

ISP 10609-9

ISO

ISP 10609-10

ISO

ISP 10609-11

ISO

ISP 10609-12

ISO

ISP 10609-14

ISO

ISP 10609-15

ISO

ISP 10609-16

ISO

ISP 10609-17

ISO

ISP 10609-20

ISO

ISP 10609-21

ISO

ISP 10609-22

Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 9: Subnetwork-Type Dependent Requirements for Network Layer, Data Link Layer and Physical Layer Concerning Permanent Access to a Packet Switched Data Network Using Virtual Calls First Edition; Amendment 11998 Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 10: LAN Subnetwork-Dependent, Media-Independent Requirements First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 11: CSMA/CD Subnetwork-Dependent, Media-Dependent Requirements First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 12: Definition of Profile TC51, Provision of the OSI Connection-Mode Transport Service Using the OSI Connection-Mode Network Service in an End System Attached to a CSMA/CD LAN First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 14: Definition of Profile TC53, Provision of the OSI Connection-Mode Transport Service Using the OSI Connection-Mode Network Service in an End System Attached to a Token Ring LAN First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 15: Definition of Profile TC54, Provision of the OSI Connection-Mode Transport Service Using the OSI Connection-Mode Network Service in an End System Attached to an FDDI LAN First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 16: Security Employing the Network Layer Security Protocol - Connection-Mode with NoHeader, for TB, TC, TD, and TE Profiles First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 17: Security Employing the Network Layer Security Protocol - Connection-Mode, with SDTPDU Based Protection, for TB/TC/TD/TEnnn Profiles First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 20: Overview of the Generalized Multi-Part ISP Structure for TC and TD Group Profiles for OSI Usage of ISDN First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 21: Subnetwork-Type Dependent Requirements for Network Layer and Data Link Layer for ISDN B-Channel X.25 DTE to DTE Operation First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 22: Subnetwork-Type Dependent Requirements for Network Layer and Data Link Layer for ISDN B-Channel X.25 DTE to DCE Operation First Edition

ISO

ISP 10609-23

ISO

ISP 10609-24

ISO

ISP 10609-25

ISO

ISP 10609-26

ISO

ISP 10609-27

ISO

ISP 10609-28

ISO

ISP 10609-30

ISO

ISP 10609-31

ISO

ISP 10609-32

ISO

ISP 10609-33

ISO

ISP 10609-34

ISO

ISP 10609-35

ISO

ISP 10609-36

Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 23: Subnetwork-Type Dependent Requirements for Network Layer and Data Link Layer for Data Transfer Concerning a Packet Switched Mode Integrated Services Digital Network Using Virtual Calls: B-Channel Access Case First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 24: Subnetwork-Type Dependent Requirements for Network Layer and Data Link Layer for Data Transfer Concerning a Packet Switched Mode Integrated Services Digital Network Using Virtual Calls: D-Channel Access Case First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 25: Subnetwork-Type Dependent Requirements for Q.931 Circuit-Switched Operation First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 26: Subnetwork-Type Dependent Requirements for Network Layer for Call Control Procedures Concerning the Outgoing Call of a Packet Switched Mode Integrated Services Digital Network in Case B Using Virtual Calls First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 27: Subnetwork-Type Dependent Requirements for Network Layer for Call Control Procedures Concerning the Incoming Call of a Packet Switched Mode Integrated Services Digital Network in Case B Using Virtual Calls First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 28: Subnetwork-Type Dependent Requirements for Data Link Layer for End Systems Attached to an ISDN Subnetwork First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 30: Definition of Profile TC1131 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 31: Definition of Profile TC1231 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 32: Definition of Profile TC4111 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 33: Definition of Profile TC4211 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 34: Definition of Profile TC43111 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 35: Definition of Profile TC43112 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 36: Definition of Profile TC43211 First Edition

ISO

ISP 10609-37

ISO

ISP 10609-38

ISO

ISP 10609-40

ISO

ISP 10609-41

ISO

ISP 10609-42

ISO

ISP 10609-43

ISO

ISP 10609-44

ISO

ISP 10609-45

ISO

ISP 10609-46

ISO

ISP 10609-47

ISO

ISP 10609-48

ISO

ISP 10610-1

ISO

ISP 10611-1

ISO

ISP 10611-3

ISO

ISP 10611-4

ISO

ISP 10611-5

ISO

ISP 10611-6

Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 37: Definition of Profile TC43212 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 38: Definition of Profile TC4331 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 40: Definition of Profile TD1131 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 41: Definition of Profile TD1231 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 42: Definition of Profile TD4111 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 43: Definition of Profile TD4211 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 44: Definition of Profile TD43111 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 45: Definition of Profile TD43112 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 46: Definition of Profile TD43211 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 47: Definition of Profile TD43212 First Edition Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 48: Definition of Profile TD4331 First Edition Information Technology - International Standardized Profile FOD11 - Open Document Format: Simple Document Structure Character Content Architecture Only - Part 1: Document Application Profile (DAP) First Edition; Technical Corrigendum 1-1998 Information technology International Standardized Profiles AMH1n Message Handling Systems Common Messaging Part 1: MHS Service Support Third Edition Information technology International Standardized Profiles AMH1n Message Handling Systems Common Messaging Part 3: AMH11 Message Transfer (P1) Third Edition Information technology International Standardized Profiles AMH1n Message Handling Systems Common Messaging Part 4: AMH12 and AMH14 MTS Access (P3) and MTS 94 Access (P3) Third Edition Information technology International Standardized Profiles AMH1n Message Handling Systems Common Messaging Part 5: AMH13 MS Access (P7) Third Edition Information technology International Standardized Profiles AMH1n Message Handling Systems Common Messaging Part 6: AMH15 - MS 94 Access (P7) Second Edition

ISO

ISP 10612-1

ISO

ISP 10612-2

ISO

ISP 10612-3

ISO

ISP 10612-4

ISO

ISP 10612-5

ISO

ISP 10612-6

ISO

ISP 10612-7

ISO

ISP 10612-8

ISO

ISP 10612-9

ISO

ISP 10613-1

ISO

ISP 10613-2

ISO

ISP 10613-3

ISO

ISP 10613-4

ISO

ISP 10613-5

ISO

ISP 10613-6

ISO

ISP 10613-7

Information technology - International Standardized Profile RD - Relaying the MAC Service using transparent bridging - Part 1: Subnetwork-independent requirements Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 2: CSMA/CD LAN Subnetwork-Dependent, Media-Dependent Requirements First Edition Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 3: Token Ring LAN Subnetwork-Dependent, Media-Dependent Requirements First Edition Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 4: Profile RD51.51 (CSMA/CD LAN - CSMA/CD LAN) First Edition Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 5: Profile RD51.54 (CSMA/CD LAN - FDDI LAN) First Edition Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 6: Profile RD54.54 (FDDI LAN - FDDI LAN) First Edition Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 7: Profile RD51.53 (CSMA/CD LAN - Token Ring LAN) First Edition Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 8: Profile RD53.53 (Token Ring LAN - Token Ring LAN) First Edition Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 9: Profile RD53.54 (Token Ring LAN - FDDI LAN) First Edition Information Techonology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 1: Subnetwork-Independent Requirements First Edition; Amendment 2: 07/18/1998 Information Techonology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 2: LAN Subnetwork-Dependent, Media-Independent Requirements First Edition Information Techonology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 3: CSMA/CD LAN Subnetwork-Dependent, Media-Dependent Requirements First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 4: FDDI LAN Subnetwork-Dependent, Media-Dependent Requirements First Edition Information Techonology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 5: Definition of Profile RA51.51, Relaying the Connectionless-Mode Network Service Between CSMA/CD LAN Subnetworks First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 6: Definition of Profile RA51.54, Relaying the Connectionless-Mode Network Service between CSMA/CD LAN Subnetworks and FDDI LAN Subnetworks First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 7: PSDN Subnetwork-Dependent, Media-Dependent Requirements for Virtual Calls over a Permanent Access First Edition; Amendment: 6/15/1998

ISO

ISP 10613-8

ISO

ISP 10613-9

ISO

ISP 10613-10

ISO

ISP 10613-11

ISO

ISP 10613-12

ISO

ISP 10613-13

ISO

ISP 10613-14

ISO

ISP 10613-15

ISO

ISP 10613-16

ISO

ISP 10613-17

ISO

ISP 10613-18

ISO

ISP 10613-19

Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 8: Definition of Profile RA51.1111, Relaying the Connectionless-Mode Network Service between CSMA/CD LAN Subnetworks and PSDNs Using Virtual Calls over a PSTN Leased Line Permanent Access First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 9: Definition of Profile RA51.1121, Relaying the Connectionless-Mode Network Service between CSMA/CD LAN Subnetworks and PSDNs Using Virtual Calls over a Digital Data Circuit/CSDN Leased Line Permanent Access First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 10: Token Ring LAN Subnetwork-Dependent, Media-Dependent Requirements First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 11: Definition of Profile RA51.53, Relaying the Connectionless-Mode Network Service between CSMA/CD LAN Subnetworks and Token Ring LAN Subnetworks First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Services - Part 12: Definition of Profile RA53.53, Relaying the Connectionless-Mode Network Service between Token Ring LAN Subnetworks First Edition Information Technology - International Standardization Profile RA - Relaying the Connectionless-Mode Network Service - Part 13: Definition of Profile RA53.54, Relaying the Connectionless-Mode Network Service between Token Ring LAN Subnetworks and FDDI LAN Subnetworks First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 14: Definition of Profile RA54.54, Relaying the Connectionless-Mode Network Service between FDDI LAN Subnetworks First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 15: Definition of Profile RA53.1111, Relaying the Connectionless-Mode Network Service between Token Ring LAN Subnetworks and PSDNs Using Virtual Calls Over PSTN Leased Line Permanent Access First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 16: Definition of Profile RA53.1121, Relaying the Connectionless-Mode Network Service between Token Ring LAN Subnetworks and PSDNs Using Virtual Calls over a Digital Data Circuit/CSDN Leased Line Permanent Access First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 17: Definition of Profile RA54.1111, Relaying the Connectionless-Mode Network Service between FDDI LAN Subnetworks and PSDNs Using Virtual Calls over a PSTN Leased Line Permanent Access First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 18: Definition of Profile RA54.1121, Relaying the Connectionless-Mode Network Service between FDDI LAN Subnetworks and PSDNs Using Virtual Calls over a Digital Data Circuit/CSDN Leased Line Permanent Access First Edition Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 19: Security Employing the Network Layer Security Protocol - Connectionless-Mode, for RAnn.nn Profiles First Edition

ISO

ISP 10613-20

ISO

ISP 10614-1

ISO

ISP 10614-2

ISO

ISP 10614-3

ISO

ISP 10614-4

ISO

ISP 10614-5

ISO

ISP 10614-6

Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 20: Security Employing the Network Layer Security Protocol - Connection-Mode with SDT-PDU Based Protection over X.25 Packet Switched Data Networks Using Virtual Calls, RA1111/RA1121 Profiles First Edition Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 1: Subnetwork-Independent Requirements First Edition Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 2: LAN Subnetwork-Dependent, MediaIndependent Requirements First Edition Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 3: CSMA/CD LAN SubnetworkDependent, Media-Dependent Requirements First Edition Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 4: PSDN Subnetwork-Dependent, Media-Dependent Requirements for Virtual Calls over a Permanent Access First Edition Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 5: Definition of Profile RC51.1111, X.25 Protocol Relaying between CSMA/CD LAN Subnetworks and PSDNs Using Virtual Calls over a PSTN Leased Line Permanent Access First Edition Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 6: Definition of Profile RC51.1121, X.25 Protocol Relaying between CSMA/CD LAN Subnetworks and PSDNs Using Virtual Calls over a Digital Data Circuit/CSDN Leased Line Permanent Access First Edition

ISO

ISP 10615-3

Information Technology - International Standardized Profiles ADInn - OSI Directory - Part 3: ADI21 - DSA Performer Role First Edition

ISO

ISP 10615-4

ISO

ISP 10615-5

ISO

ISP 10615-6

ISO

ISP 10616

ISO

ISP 11181-1

ISO

ISP 11182-1

Information Technology - International Standardized Profiles ADInn - OSI Directory - Part 4: ADI22 - DSA Invoker Role First Edition Information Technology - International Standardized Profiles ADInn - OSI Directory - Part 5: ADI31 - DUA Support for Distributed Operations First Edition Information Technology - International Standardized Profiles ADInn - OSI Directory - Part 6: ADI32 - DSA Support for Distributed Operations First Edition Information Technology - International Standardized Profile FDI11 - Directory Data Definitions - Common Directory Use (Normal) First Edition Information Technology - International Standardized Profile FOD26 - Open Document Format: Enhanced Document Structure Character, Raster Graphics and Geometric Graphics Content Architectures - Part 1: Document Application Profile (DAP) First Edition; Technical Corrigendum 1: 04/15/1998 Information Technology - International Standardized Profile FOD36 - Open Document Format: Extended Document Structure Character, Raster Graphics and Geometric Graphics Content Architectures - Part 1: Document Application Profile (DAP) First Edition; Technical Corrigendum 1-1998

ISO

ISP 11183-1

Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications - Part 1: Specification of ACSE, Presentation and Session Protocols for the Use by ROSE and CMISE First Edition; AS/NZS 4248.1: 1994

ISO

ISP 11183-2

ISO

ISP 11183-3

ISO

ISP 11184-1

ISO

ISP 11184-2

ISO

ISP 11184-3

ISO

ISP 11185-1

ISO

ISP 11185-2

ISO

ISP 11185-3

ISO

ISP 11185-4

ISO

ISP 11185-5

ISO

ISP 11185-6

ISO

ISP 11185-7

Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications - Part 2: CMISE/ROSE for AOM12 - Enhanced Management Communications First Edition; EN ISP 11183-2: 1994; AS/NZS 4248.2: 1994 Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications - Part 3: CMISE/ROSE for AOM11 - Basic Management Communications First Edition; Corrected and Reprinted - 1993; EN ISP 11183-3: 1994; AS/NZS 4248.3: 1994 Information Technology - International Standardized Profiles FVT1nn - Virtual Terminal Basic Class - Register of VTE-Profiles - Part 1: FVT121, FVT122 - S-Mode Forms and Paged VTE-Profiles First Edition Information Technology - International Standardized Profiles FVT1nn - Virtual Terminal Basic Class - Register of VTE-Profiles - Part 2: FVT115 - A-Mode Generalized Telnet VTE-Profile First Edition Information Technology - International Standardized Profiles FVT1nn - Virtual Terminal Basic Class - Register of VTE-Profiles - Part 3: FVT114 - A-Mode Transparent VTE-Profile Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 1: FVT211, FVT212 - Sequenced and Unsequenced Application Control Objects First Edition; CEN EN ISP 111851: 1995 Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 2: FVT213, FVT214 - Sequenced and Unsequenced Terminal Control Objects First Edition; CEN EN ISP 11185-2: 1995 Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 3: FVT215, FVT216 - Application RIO Record Loading Control Object, Terminal RIO Record Notification Control Object First Edition Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 4: FVT217 - Horizontal Tabulation Control Object First Edition; CEN EN ISP 11185-4: 1995 Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 5: FVT218 - Logical Image Control Object First Edition; CEN EN ISP 11185-5: 1995 Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 6: FVT219 - Status Message Control Object First Edition; CEN EN ISP 11185-6: 1995 Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 7: FVT2110 - Entry-Control Control Object First Edition; CEN EN ISP 11185-7: 1995

ISO

ISP 11185-8

Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 8: FVT221 - Forms FEICO (Field Entry Instruction Control Object) No. 1 First Edition; CEN EN ISP 11185-8: 1995

ISO

ISP 11185-9

Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 9: FVT222 - Paged FEICO (Field Entry Instruction Control Object) No. 1 First Edition (CEN EN ISP 11185-9: 1995)

ISO

ISP 11185-10

Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 10: FVT231 - Forms FEPCO (Field Entry Pilot Control Object) No. 1 First Edition; CEN EN ISP 11185-10: 1995

ISO

ISP 11185-11

Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 11: FVT232 - Paged FEPCO (Field Entry Pilot Control Object) No. 1 First Edition; CEN EN ISP 11185-11: 1995

ISO

ISP 11185-12

ISO

ISP 11185-13

ISO

ISP 11185-14

ISO

ISP 11185-15

ISO

ISP 11185-16

ISO

ISP 11185-17

ISO

ISP 11186-1

ISO

ISP 11186-2

ISO

ISP 11186-3

ISO

ISP 11186-4

ISO

ISP 11187-1

ISO

ISP 11187-2

ISO

ISP 11187-3

ISO

ISP 11187-4

Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions Part 12: FVT2116 - Generalized Telnet Synch Control Object; FVT2117 - Generalized Telnet Signal Control Object; FVT2118 - Generalized Telnet Negotiation Control Object; FVT2119 - Generalized Telnet Subnegotiation Control Object First Edition Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 13: FVT2111 - Waiting Time Control Object First Edition Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 14: FVT2112 - Printer Control Object First Edition Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 15: FVT2113 - Field Definition Management Control Object First Edition Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 16: FVT2114 - Terminal Signal Titles Control Object First Edition Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 17: FVT2115 - Help Text Control Object First Edition Information Technology - International Standardized Profiles FVT3nn - Virtual Terminal Basic Class - Register of Attribute Assignment Type Definitions - Part 1: FVT321 - Font Assignment Type No. 1 First Edition Information Technology - International Standardized Profiles FVT3nn - Virtual Terminal Basic Class - Register of Attribute Assignment Type Definitions - Part 2: FVT311 - Repertoire Assignment Type for ISO/IEC 10646 First Edition Information Technology - International Standardized Profiles FVT3nn - Virtual Terminal Basic Class - Register of Attribute Assignment Type Definitions - Part 3: FVT312 - Repertoire Assignment Type for ISO/IEC 2022 Level 2 First Edition Information Technology - International Standardized Profiles FVT3nn - Virtual Terminal Basic Class - Register of Attribute Assignment Type Definitions - Part 4: FVT322 - Font Assignment Type No. 2 First Edition Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part 1: Common VT Protocol Requirements First Edition Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part 2: Common Supporting Layers Requirements First Edition Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part 3: AVT22 - S-Mode Forms Application Profile First Edition Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part 4: AVT23 - S-Mode Paged Application Profile First Edition

ISO

ISP 11187-5

ISO

ISP 11187-6

ISO

ISP 11188-1

ISO

ISP 11188-2

ISO

ISP 11188-3

ISO

ISP 11190

ISO

ISP 12059-0

ISO

ISP 12059-1

ISO

ISP 12059-2

ISO

ISP 12059-3

ISO

ISP 12059-4

ISO

ISP 12059-5

ISO

ISP 12059-6

ISO

ISP 12059-13

ISO

ISP 12060-1

ISO

ISP 12060-2

ISO

ISP 12060-3

ISO

ISP 12060-4

Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part 5: AVT16 - A-Mode Generalized Telnet Application Profile First Edition Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part 6: AVT15 - A-Mode Transparent Application Profile First Edition Information Technology - International Standardized Profile - Common Upper Layer Requirements - Part 1: Basic Connection Oriented Requirements First Edition Information Technology - International Standardized Profile - Common Upper Layer Requirements - Part 2: Basic Connection Oriented Requirements for ROSE-Based Profiles First Edition Information Technology - International Standardized Profile - Common Upper Layer Requirements - Part 3: Minimal OSI Upper Layer Facilities First Edition Information Technology - International Standardized Profile FDI3 - Directory Data Definitions - FTAM Use of the Directory First Edition; CEN EN ISO/IEC ISP 11190: 1996 Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 0: Common Definitions for Management Function Profiles First Edition Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 1: Object Management First Edition Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 2: State Management First Edition Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 3: Attributes for Representing Relationships First Edition Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 4: Alarm Reporting First Edition Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 5: Event Report Management First Edition Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 6: Log Control First Edition Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions Part 13: Summarization First Edition Information Technology - International Standardized Profiles OSI Management - Management Functions - Part 1: AOM211 - General Management Capabilities First Edition Information Technology - International Standardized Profiles OSI Management - Management Functions - Part 2: AOM212 - Alarm Reporting and State Management Capabilities First Edition Information Technology - International Standardized Profiles OSI Management - Management Functions - Part 3: AOM213 - Alarm Reporting Capabilities First Edition Information Technology - International Standardized Profiles OSI Management - Management Functions - Part 4: AOM221 - General Event Report Management First Edition

ISO

ISP 12060-5

ISO

ISP 12060-8

ISO

ISP 12061-1

ISO

ISP 12061-2

ISO

ISP 12061-3

ISO

ISP 12061-4

Information Technology - International Standardized Profiles - OSI Management - Management Functions - Part 5: AOM231 General Log Control First Edition Information Technology - International Standardized Profiles - OSI Management - Management Functions - Part 8: AOM253X Summarization Objects (Including Profiles AOM2531-AOM2539) First Edition Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 1: Introduction to the Transaction Processing Profiles First Edition Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 2: Support of OSI TP APDUs First Edition Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 3: Support of CCR APDUs First Edition Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 4: Support of Session, Presentation and ACSE PDUs First Edition

ISO

ISP 12061-5

Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 5: Application Supported Transactions - Polarized Control (ATP11) First Edition; CEN EN ISP 12061-5: 1996

ISO

ISP 12061-6

ISO

ISP 12061-7

Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 6: Application Supported Transactions - Shared Control (ATP12) First Edition; CEN EN ISP 12061-6: 1996 Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 7: Provider Supported Unchained Transactions - Polarized Control (ATP21) First Edition; CEN EN ISP 12061-7: 1996

ISO

ISP 12061-8

Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 8: Provider Supported Unchained Transactions - Shared Control (ATP22) First Edition; CEN EN ISP 12061-8: 1996

ISO

ISP 12061-9

Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 9: Provider Supported Chained Transactions - Polarized Control (ATP31) First Edition; CEN EN ISP 12061-9: 1996

ISO

ISP 12061-10

ISO

ISP 12062-1

ISO

ISP 12062-2

ISO

ISP 12062-3

Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 10: Provider Supported Chained Transactions - Shared Control (ATP32) First Edition; CEN EN ISP 12061-10: 1996 Information technology International Standardized Profiles AMH2n Message Handling Systems Interpersonal Messaging Part 1: IPM MHS Service Support Third Edition Information technology International Standardized Profiles AMH2n Message Handling Systems Interpersonal Messaging Part 2: AMH21 IPM Content Third Edition Information technology International Standardized Profiles AMH2n Message Handling Systems Interpersonal Messaging Part 3: AMH22 IPM Requirements for Message Transfer (P1) Third Edition

ISO

ISP 12062-4

ISO

ISP 12062-5

ISO

ISP 12062-6

ISO

ISP 12064-1

ISO

ISP 12067-1

ISO

ISP 12067-2

ISO

ISP 12067-3

ISO

ISP 12067-4

ISO

ISP 12067-5

ISO

ISP 12068-1

ISO

ISP 12068-2

ISO

ISP 12069-1

ISO

ISP 12069-2

ISO

ISP 12069-3

ISO

ISP 12069-4

ISO

ISP 12069-5

ISO

ISP 12069-6

Information technology International Standardized Profiles AMH2n Message Handling Systems Interpersonal Messaging Part 4: AMH23 and AMH25 IPM Requirements for MTS Access (P3) and MTS 94 Access (P3) Third Edition Information technology International Standardized Profiles AMH2n Message Handling Systems Interpersonal Messaging Part 5: AMH24 IPM Requirements for Enhanced MS Access (P7) Third Edition Information technology International Standardized Profiles AMH2n Message Handling Systems Interpersonal Messaging Part 6: AMH26 IPM Requirements for Enhanced MS 94 Access (P7) First Edition Information Technology - International Standardized Profile FOD112 - Open Document Format: Image Applications - Simple Document Structure - Raster Graphics Content Architecture - Part 1: Document Application Profile (DAP) First Edition Information Technology - International Standardized Profile RB - Relaying the Connection-Mode Network Service - Part 1: Subnetwork-Independent Requirements First Edition Information Technology - International Standardized Profile RB - Relaying the Connection-Mode Network Service - Part 2: LAN Subnetwork-Dependent Media-Independent Requirements First Edition Information Technology - International Standardized Profile RB - Relaying the Connection-Mode Network Service - Part 3: PSDN Subnetwork-Dependent Media-Dependent Requirements for Vitual Calls over a Permanent Access First Edition Information Technology - International Standardized Profile RB - Relaying the Connection-Mode Network Service - Part 4: Definition of Profile RB51.1111, Relaying the Connection-Mode Network Service Between CSMA/CD LAN Subnetworks and PSDNs Using Virtual Calls over a PSTN Leased Line Permanent Access First Edition Information Technology - International Standardized Profile RB - Relaying the Connection-Mode Network Service - Part 5: Definition of Profile RB51.1121, Relaying the Connection-Mode Network Service Between CSMA/CD LAN Subnetworks and PSDNs Using Virtual Calls over a Digital Data Circuit/CSDN Leased Line Permanent Access First Edition Information Technology - International Standardized Profile FDI 4 - Directory Data Definitions - Use of the Directory for OSI TP - Part 1: FDI 41 - Basic Naming and Addressing First Edition Information Technology - International Standardized Profile FDI 4 - Directory Data Definitions - Use of the Directory for OSI TP - Part 2: FDI 42 - Enhanced Naming and Addressing First Edition Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 1: Introduction to the DFR ISP First Edition Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 2: Specification of ROSE, RTSE, ACSE, Presentation and Session Protocols for Use by DFR First Edition Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 3: ADF11 Common Document Filing and Retrieval - Read Only Profile First Edition Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 4: ADF12 Common Filing and Retrieval - Archiving Profile First Edition Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 5: ADF13 Common Filing and Retrieval - Document Store Manipulation Profile First Edition Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 6: ADF21 - Remote Store Management - Simple Management Profile First Edition

ISO

ISP 12069-7

ISO

ISP 12070-1

ISO

ISP 12071-1

ISO

ISP 12071-2

ISO

ISP 12071-3

ISO

ISP 12071-4

ISO ISO

ISP 12072 ISP 12073

ISO

ISP 15121-1

ISO

ISP 15121-2

ISO

ISP 15121-3

ISO

ISP 15124-1

ISO

ISP 15125-4

ISO

ISP 15125-7

ISO

ISP 15125-10

ISO

ISP 15125-12

ISO

ISP 15126-1

ISO

ISP 15126-2

Information Technology - International Standardized Profiles ADFnn - Document Filing and Retrieval (DFR) - Part 7: ADF22 - Remote Store Management - Full Management Profile First Edition Information Technology - International Standardized Profiles FCSnnn - Character Set 8-Bit Code Structure Based on ISO/IEC 2022 Part 1: FCS111 - 2022 Option 1 First Edition; BS EN ISP 12070-1: 1997 Information Technology - International Standardized Profile FCG-nnn - Computer Graphics Metafile Interchange Format - Part 1: FCG11 - Basic Scientific and Technical Graphics (BST) First Edition Information Technology - International Standardized Profile FCG-nnn - Computer Graphics Metafile Interchange Format - Part 2: FCG23 - Advanced Scientific and Technical Graphics (AST) First Edition Information Technology - International Standardized Profile FCG-nnn - Computer Graphics Metafile Interchange Format - Part 3: FCG32 - Basic Presentation and Visualization - Model Profile First Edition Information Technology - International Standardized Profile FCG-nnn - Computer Graphics Metafile Interchange Format - Part 4: FCG33 - Advanced Presentation and Visualization (APV) First Edition Information Technology - International Standardized Profile FD15 - Directory Data Definitions - VT Use of the Directory First Edition Information Technology -International Standardized Profile FD16 - Directory Use by EDI First Edition Information Technology - International Standardized Profile AOD1n - Interactive Manipulation of ODA Documents - Part 1: AOD11 DTAM/Read Only First Edition Information Technology - International Standardized Profile AOD1n - Interactive Manipulation of ODA Documents - Part 2: AOD12 DTAM/Insert First Edition Information Technology - International Standardized Profile AOD1n - Interactive Manipulation of ODA Documents - Part 3: AOD13 DTAM/ Manipulation First Edition Information Technology - International Standardized Profile FOD126 - Open Document Format: Image Applications - Enhanced Document Structure - Character, Raster Graphics, and Geometric Graphics Content Architecture - Part 1: Document Application Profile (DAP) First Edition Information Technology - International Standardized Profiles ADYnn - OSI Directory - Part 4: ADY22 - DSA Support of Distributed Operations First Edition Information Technology - International Standardized Profiles ADYnn - OSI Directory - Part 7: ADY43 - DSA to DSA Authentication First Edition Information Technology - International Standardized Profiles ADYnn - OSI Directory - Part 10: ADY51 - Shadowing Using ROSE First Edition Information Technology - International Standardized Profiles ADYnn - OSI Directory - Part 12: ADY53 - Shadowing Subsets First Edition Information Technology - International Standardized Profiles FDY1n - Directory Data Definitions - Part 1: FDY11 - Common Directory Use (Normal) First Edition Information Technology - International Standardized Profiles FDY1n - Directory Data Definitions - Part 2: FDY12 - Directory System Schema First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

ISP 15287-2 IWA 1 IWA 3 IWA 4 IWA 5 PAS 11154 PAS 11856 PAS 12158 PAS 15594 PAS 16917

ISO ISO ISO ISO ISO

PAS 16940 PAS 17001 PAS 17002 PAS 17003 PAS 17004

ISO ISO

PAS 17684 PAS 17712

ISO ISO ISO ISO

PAS 17984 PAS 18152 PAS 18873 PAS 20858

ISO ISO ISO

PAS 21308-1 PAS 22574 PAS 22720

ISO ISO

PAS 22853 PAS 26183

ISO

PAS 27145-1

ISO

PAS 27145-2

Information Technology - Standardized Application Environment Profile - Part 2: Posix Realtime Application Support (AEP) First Edition; IEEE Std 1003.13 Quality management systems Guidelines for process improvements in health service organizations Second Edition Image safety Reducing the incidence of undesirable biomedical effects caused by visual image sequences Quality management systems Guidelines for the application of ISO 9001:2000 in local government Emergency preparedness Road vehicles Roof load carriers First Edition; Replaces ISO 11154-1:1995 and ISO 11154-4:2004 Textile Floor Coverings - Test Methods for the Determination of Fibre Bind First Edition Road Vehicles Braking Systems Temperature Measuring Methods First Edition Airport hydrogen fuelling facility operations First Edition Ships and Marine Technology - Data Transfer Standard for Maritime and Internodal Transportation and Security First Edition Glass in building Glazing and airborne sound insulation Measurement of the mechanical impedance of laminated glass First Edition Conformity assessment Impartiality Principles and requirements First Edition Conformity assessment Confidentiality Principles and requirements First Edition Conformity assessment Complaints and appeals Principles and requirements First Edition Conformity assessment Disclosure of information Principles and requirements First Edition Transport information and control systems In-vehicule navigation systems ITS message set translator to ASN.1 format definitions First Edition Freight containers Mechanical seals Second Edition Machine-Made Textile Floor Coverings - Determination of Dimensional Changes After Exposure to Heat and/or Water First Edition Ergonomics of human-system interaction Specification for the process assessment of human-system issues First Edition International protocol for doping control First Edition Ships and marine technology Maritime port facility security assessments and security plan development First Edition Road vehicles ù Product data exchange between chassis and bodywork manufacturers (BEP) ù Part 1: General principles First Edition Road vehicles ù Brake linings frictions materials ù Visual inspection First Edition ASAM Open Data Services 5.0 First edition Ships and marine technology Computer applications Specification of Maritime Safety Markup Language (MSML) First Edition SASIG Product data quality guidelines for the global automotive industry First Edition Road vehicles Implementation of WWH-OBD communication requirements Part 1: General information and use case definition First Edition Road vehicles Implementation of WWH-OBD communication requirements Part 2: Common emissions-related data dictionary First Edition

ISO

PAS 27145-3

ISO

PAS 27145-4

ISO ISO ISO ISO ISO

PAS 28001 PAS 28004 R538 R644 R784

ISO ISO ISO ISO ISO ISO ISO

843 R916 R1938 TR 140-13 TR 210 TR 211 TR 224

ISO ISO

TR 230-9 TR 581

ISO ISO ISO

TR 834-3 TR 896 TR 1417

ISO

TR 1896

ISO

TR 2801

ISO ISO ISO ISO ISO

TR 3313 TR 3352 TR 3666 TR 3814 TR 3834-6

Road vehicles Implementation of WWH-OBD communication requirements Part 3: Common message dictionary First Edition Road vehicles Implementation of WWH-OBD communication requirements Part 4: Connection between vehicle and test equipment First Edition Security management systems for the supply chain Best practices for implementing supply chain security Assessments and plans First Edition Security management systems for the supply chain Guidelines for the implementation of ISO/PAS 28000 First Edition Conventional Signs to Be Used in Schemes for the Installations of Pipeline Systems in Ships First Edition Conventional Signs to Be Used in Schemes for the Installations of Ventilation Systems in Ships First Edition Conventional Signs to Be Used in Schemes for the Installations of Sanitary Systems in Ships First Edition Information and Documentation - Conversion of Greek Characters into Latin Characters First Edition; Corrected and Reprinted 05/01/1999 Testing of Refrigerating Systems First Edition ISO System of Limits and Fits Part II: Inspection of Plain Workpieces First Edition Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 13: Guidelines First Edition Essential Oils - General Rules for Packaging, Conditioning and Storage First Edition Essential Oils - General Rules for Labelling and Marking of Containers First Edition Aircraft - Declaration of Design and Performance for Aircraft Equipment - Standard Form First Edition Test code for machine tools Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations First Edition Weldability Metallic materials General principles First Edition; Replaces ISO 581: 1980 Fire-Resistance Tests - Elements of Building Construction - Part 3: Commentary on Test Method and Test Data Application First Edition Surface Active Agents - Scientific Classification First Edition Automobiles - Anchorages for Seat Belts First Edition Products in Fibre-Reinforced Cement - Non-Combustible Fibre-Reinforced Boards of Calcium Silicate or Cement for Insulation and Fire Protection First Edition Clothing for protection against heat and flame ù General recommendations for selection, care and use of protective clothing First Edition [Replaced: ISO 2801, ISO 2801] Measurement of Fluid Flow in Closed Conduits - Guidelines on the Effects of Flow Pulsations on Flow-Measurement Instruments Third Edition Acoustics - Assessment of Noise with Respect to Its Effect on the Intelligibility of Speech First Edition Viscosity of Water Second Edition Tests for MeasuringReaction-to-Fire" of Building Materials - Their Development and Application Second Edition;" Quality requirements for fusion welding of metallic materials ù Part 6: Guidelines on implementing ISO 3834 First edition

ISO ISO ISO ISO

TR 3956 TR 4114 TR 4137 TR 4191

ISO ISO ISO

TR 4558 TR 4745 TR 4830-4

ISO

TR 4869-4

ISO ISO ISO

TR 4869-5 TR 4870 TR 4918

ISO

TR 5045

ISO

TR 5046

ISO ISO

TR 5047 TR 5307

ISO ISO ISO ISO ISO

TR 5460 TR 5658-1 TR 5659-3 TR 5660-3 TR 5924

ISO ISO ISO ISO

TR 5925-2 TR 5987 TR 6065 TR 6132

ISO ISO

TR 6167 TR 6306

Principles of Structural Fire-Engineering Design with Special Regard to the Connection Between Real Fire Exposure and the Heating Conditions of the Standard Fire-Resistance Test (ISO 834) First Edition Road Vehicles - Caravans and Light Trailers - Static Load on Ball Couplings First Edition Plastics - Determination of Modulus of Elasticity by Alternating Flexure First Edition Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Water Supply - Recommended Practice for Laying First Edition Small Craft - Rigging Screws for Stainless Steel Wire Rope - Principal Dimensions for Forks, Connection Pins and Eye-Holes First Edition High Conductivity Copper - Spiral Elongation Test First Edition Steel - Determination of Low Carbon Contents - Part IV: Coulometric Method After Combustion First Edition Acoustics - Hearing Protectors - Part 4: Measurement of Effective Sound Pressure Levels for Level-Dependent Sound-Restoration Ear-Muffs First Edition Acoustics Hearing protectors Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects First Edition Acoustics - the Construction and Calibration of Speech Intelligibility Tests First Edition Textile Floor Coverings - Determination of Wear - Castor Chair Test First Edition Continuous Mechanical Handling Equipment - Safety Code for Belt Conveyors - Examples for Guarding of Nip Points First Edition Continuous Mechanical Handling Equipment - Safety Code for Conveyors and Elevators with Chain-Elements - Examples for Guarding of Nip Points First Edition Continuous Mechanical Handling Equipment - Chain Conveyors with Bearing Devices or Load Carriers - Examples of Protection Against Injuries by Load Carriers First Edition Solid Fertilizers - Derivation of a Sampling Plan for the Evaluation of a Large Delivery First Edition Technical Drawings - Geometrical Tolerancing - Tolerancing of Form, Orientation, Location and Run-Out - Verification Principles and Methods - Guidelines First Edition Reaction to Fire Tests - Spread of Flame - Part 1: Guidance on Flame Spread First Edition Plastics - Smoke Generation - Part 3: Determination of Optical Density by a Dynamic-Flow Method First Edition Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement First Edition Fire Tests - Reaction to Fire - Smoke Generated by Building Products (Dual-Chamber Test) First Edition Fire tests Smoke-control door and shutter assemblies Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy Second Edition Inland Navigation - Water Fire-Fighting System - Couplings of Fire Hoses - General Technical Requirements First Edition Shipbuilding and Marine Structures - Inflatable Liferafts - Materials First Edition Numerical Control of Machines - Operational Command and Data Format First Edition Fire-Resistance Tests - Contribution Made by Suspended Ceilings to the Protection of Steel Beams in Floor and Roof Assemblies First Edition Chemical Analysis of Steel - Order of Listing Elements First Edition

ISO ISO ISO

TR 6371 6622-2 6627

ISO ISO

TR 6741-4 TR 7003

Information Processing - Interchange Practices and Test Methods for Unrecorded Instrumentation Magnetic Tape First Edition Internal combustion engines Piston rings Part 2: Rectangular rings made of steel First Edition; Replaces ISO TR 6622-2 Internal Combustion Engines - Piston Rings - Expander/Segment Oil-Control Rings First Edition Textiles - Fibres and Yarns - Determination of Commercial Mass of Consignments - Part 4: Values Used for the Commercial Allowances and the Commercial Moisture Regains First Edition Unified Format for the Designation of Metals First Edition

ISO

TR 7066-1

Assesment of Uncertainty in Calibration and Use of Flow Measurement Devices - Part 1: Linear Calibration Relationships First Edition

ISO ISO ISO ISO

TR 7073 TR 7074 TR 7178 TR 7239

ISO ISO ISO ISO ISO ISO

TR 7240-14 TR 7242 TR 7248 TR 7468 TR 7469 TR 7470

ISO ISO

TR 7553 TR 7620

ISO ISO ISO ISO ISO ISO ISO ISO ISO

TR 7621 TR 7705 TR 7849 TR 7861 TR 7871 TR 7882 TR 7955 TR 8059 TR 8091

Fertilizers - Sampling - Minimum Mass of Increment to Be Taken to Be Representative of the Total Sampling Unit First Edition Rubber materials - Chemical resistance Second edition Rubber or Plastics Covered Rollers - Enquiries and Orders - Recommendations for Technical Information to Be Supplied by Purchaser First Edition Guidelines for Specifying Charpy V-Notch Impact Prescriptions in Steel Specifications Second Edition Acoustics - Estimation of Airborne Noise Emitted by Machinery Using Vibration Measurement First Edition Road vehicles Injury risk curves for evaluation of occupant protection in frontal impact First Edition Cumulative Sum Charts - Guidance on Quality Control and Data Analysis Using CUSUM Techniques First Edition Road Vehicles - Brake Linings - Determination of Thermal Conductivity by Guarded Hot-Plate Apparatus First Edition Ferroniobium - Determination of Niobium Content - Gravimetric Method First Edition Irrigation Equipment - Automatic Irrigation Systems - Hydraulic Control First Edition Textiles - Twist Factor Related to the Tex System First Edition

ISO

TR 8125

Anodizing of Aluminium and Its Alloys - Determination of Colour and Colour Difference of Coloured Anodic Coatings First Edition

Recommended Techniques for the Installation of Unplasticized Poly(Vinyl Chloride) (PVC-U) Buried Drains and Sewers First Edition Performance Requirements for Plastics Pipes and Fittings for Use in Underground Drainage and Sewage First Edition Liquid Flow Measurement in Open Channels - Velocity-Area Methods - Investigation of Total Error First Edition Development and Principles for Application of Public Information Symbols First Edition; (PNS 1083: 1992) Fire detection and alarm systems Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings First Edition Chemical Analysis of Light Metals and Their Alloys - Statistical Interpretation of Inter-Laboratory Trials First Edition Fire Data - Collection and Presentation System First Edition Summary of Average Stress Rupture Properties of Wrought Steels for Boilers and Pressure Vessels First Edition Dimensional Stability of Hardboard First Edition Valve Outlets for Gas Cylinders - List of Provisions Which Are Either Standardized or in Use Second Edition

ISO ISO ISO

TR 8266 TR 8281-1 TR 8354

ISO ISO ISO ISO

TR 8357 TR 8363 TR 8389 TR 8390

ISO

TR 8393

ISO ISO

TR 8435 TR 8517

ISO

TR 8550-1

ISO

TR 8550-3

ISO ISO ISO ISO ISO

TR 8610 TR 8646 TR 8647 TR 8725 TR 8726

ISO ISO ISO

TR 8802-1 TR 8865 TR 8942

ISO

TR 9007

ISO

TR 9122-2

ISO ISO ISO

TR 9122-4 TR 9122-5 TR 9126-2

Guidelines for the Presentation of International Standards Dealing with the Design of Structures First Edition Packaging - Estimating the Filled Volume Using the Flat Dimensions - Part 1: Paper Sacks First Edition Rubber Hoses and Hose Assemblies for Underground Mining - Textile-Reinforced Air and Water Type First Edition Road Vehicles - Instructions for the Implementation of the Assignment of World Manufacturer Identifier (WMI) Codes for Vehicle Identification Number (VIN) Systems and for World Parts Manufacturer Identifier (WPMI) Codes First Edition Measurement of Liquid Flow in Open Channels - General Guidelines for Selection of Method First Edition Building Construction - Modular Coordination - System of Preferred Numbers Defining Multimodular Sizes First Edition Building Construction - Modular Coordination - Application of Horizontal Multimodules First Edition Documentation - ISO Bibliographic Filing Rules (International Standard Bibliographic Filing Rules) - Exemplification of Bibliographic Filing Principles in a Model Set of Rules First Edition Continuous Mechanical Handling Equipment - Safety Code for Belt Conveyors - Examples for Protection of Pinch Points on Idlers First Edition Rubber- or Plastics-Covered Rollers - Glossary First Edition Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots ù Part 1: Acceptance sampling First Edition [Cancelled: ISO TR 8550] [Superseded: ISO TR 8550] Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots ù Part 3: Sampling by variables First Edition [Superseded: ISO TR 8550] Light Gauge Metal Containers - Round Vent-Hole Cans with Soldered Ends for Milk and Milk Products - Capacities and Related Diameters First Edition Explanatory Notes on ISO 281/1-1977 First Edition Environmental Degradation of Textiles Used in Air Cargo Restraint Equipment First Edition Road Vehicles - Transient Open-Loop Response Test Method with One Period of Sinusoidal Input First Edition Road Vehicles - Transient Open-Loop Response Test Method with Pseudo-Random Steering Input First Edition Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks Specific Requirements - Part 1: Overview of Local Area Network Standards Third Edition; Corrected and Reprinted Mining - Guidance on Methods of Verifying Dimensions of Sprocket Assemblies for Chain Conveyors First Edition Rubber Compounding Ingredients - Carbon Black - Determination of Individual Pellet Crushing Strength First Edition Information Processing Systems - Concepts and Terminology for the Conceptual Scheme and the Information Base First Edition Toxicity Testing of Fire Effluents - Part 2: Guidelines for Biological Assays to Determine the Acute Inhalation Toxicity of Fire Effluents (Basic Principles, Criteria and Methodology) First Edition Toxicity Testing of Fire Effluents - Part 4: the Fire Model (Furnaces and Combustion Apparatus Used in Small-Scale Testing) First Edition Toxicity Testing of Fire Effluents - Part 5: Prediction of Toxic Effects of Fire Effluents First Edition Software Engineering - Product Quality - Part 2: External Metrics First Edition

ISO ISO ISO

TR 9126-3 TR 9126-4 TR 9165

ISO ISO

TR 9172 TR 9209

ISO ISO ISO ISO ISO

TR 9210 TR 9212 TR 9240 TR 9272 TR 9294

ISO

TR 9310

ISO

TR 9325

ISO

TR 9326

ISO ISO

TR 9372 TR 9464

ISO ISO ISO ISO ISO

TR 9494 TR 9511 TR 9527 TR 9544 TR 9547

ISO ISO

TR 9564-4 TR 9573

ISO

TR 9573-11

ISO

TR 9573-13

Software Engineering - Product Quality - Part 3: Internal Metrics First Edition Software engineering Product quality Part 4: Quality in use metrics First Edition Practical Thermal Properties of Building Materials and Products First Edition Continuous Mechanical Handling Equipment - Safety Code for Screw Conveyors - Examples of Guards for Trapping and Shearing Points First Edition Measurement of Liquid Flow in Open Channels - Determination of the Wetline Correction First Edition Measurement of Liquid Flow in Open Channels - Measurement in Meandering Rivers and in Streams with Unstable Boundaries First Edition Hydrometry Measurement of liquid flow in open channels Methods of measurement of bedload discharge Second Edition Textiles - Design of Apparel for Reduced Fire Hazard First Edition Rubber and rubber products Determination of precision for test method standards Second edition Information Technology - Guidelines for the Management of Software Documentation Second Edition Road Vehicles - Smoke Measurement of Compression-Ignition (Diesel) Engines - Survey of Short In-Service Tests First Edition (PNS 1161:1993) Implants for Surgery - Partial and Total Hip Joint Prostheses - Recommendations for Simulators for Evaluation of Hip Joint Prostheses First Edition Implants for Surgery - Partial and Total Hip Joint Prostheses - Guidance for Laboratory Evaluation of Change of Form of Bearing Surfaces First Edition Plastics - Basic Materials for Polyurethanes - Determination of the Amounts of 2,4- and 2,6-Isomers in Toluenediisocyanate by Infrared Spectroscopy First Edition Guidelines for the Use of ISO 5167-1: 1991 First Edition Petroleum Liquids - Automatic Pipeline Sampling - Statistical Assessment of Performance of Automatic Samplers Determining the Water Content in Hydrocarbon Liquids First Edition Road Vehicles - Driver Hand-Control Reach - In-Vehicle Checking Procedure First Edition Building Construction - Needs of Disabled People in Buildings - Design Guidelines First Edition Information Processing - Computer-Assisted Publishing - Vocabulary First Edition Programming language processors - Test methods - Guidelines for their development and acceptability Banking Personal Identification Number (PIN) management and security Part 4: Guidelines for PIN handling in open networks First Edition Information Processing - SGML Support Facilities - Techniques for Using SGML First Edition Information processing -- SGML support facilities -- Part 11: Structure descriptions and style specifications for standards document interchange Second Edition; CD Rom - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide Information Technology - SGML Support Facilities - Techniques for Using SGML - Part 13: Public Entity Sets for Mathematics and Science First Edition

ISO ISO ISO ISO

TR 9575 TR 9577 TR 9578 TR 9586

ISO ISO ISO

TR 9705-2 TR 9721 TR 9769

ISO

TR 9789

ISO ISO ISO

TR 9790 TR 9819 TR 9823

ISO ISO ISO

TR 9824 TR 9901 TR 9953

ISO

TR 10000-1

ISO

TR 10000-2

ISO ISO ISO

TR 10000-3 TR 10013 TR 10017

ISO

TR 10021-11

ISO ISO ISO

TR 10029 TR 10032 TR 10034

ISO

TR 10037

Information Technology - Telecommunications and Information Exchange between Systems - OSI Routeing Framework Second Edition; NZS/ISO/IEC TR 9575: 1990 Information Technology - Protocol Identification in the Network Layer Fourth Edition Information Technology - Communication Interface Connectors Used in Local Area Networks First Edition Implants for Surgery - Usage of the TermsValgus" and"Varus" in Orthopaedic Surgery First Edition" Reaction-to-Fire Tests - Full-Scale Room Tests for Surface Products - Part 2: Technical Background and Guidance First Edition Nickel and Nickel Alloys - Rules for Material Description Based on Chemical Symbols First Edition Steel and Iron - Review of Available Methods of Analysis Third Edition Information Technology - Guidelines for the Organization and Representation of Data Elements for Data Interchange - Coding Methods and Principles First Edition Road Vehicles - Anthropomorphic Side Impact Dummy - Lateral Impact Response Requirements to Assess the Biofidelity of the Dummy First Edition Road Vehicles - Comparison Tables of Regulations on Photometric Requirements of Light Signalling Devices First Edition Liquid Flow Measurement in Open Channels - Velocity-Area Method Using a Restricted Number of Verticals First Edition Hydrometry ù Measurement of free surface flow in closed conduits First Edition [Superseded: ISO TR 9824-1, ISO TR 9824-2] Solar Energy - Field Pyranometers - Recommended Practice for Use First Edition Earth-Moving Machinery - Warning Devices for Slow-Moving Machines - Ultrasonic and Other Systems Information Technology - Framework and Taxonomy of International Standardized Profiles - Part 1: General Principles and Documentation Framework Fourth Edition Information Technology - Framework and Taxonomy of International Standardized Profiles - Part 2: Principles and Taxonomy for OSI Profiles Fifth Edition Information Technology - Framework and Taxonomy of International Standardized Profiles - Part 3: Principles and Taxonomy for Open System Environment Profiles Second Edition Guidelines for Quality Management System Documentation First Edition Guidance on statistical techniques for ISO 9001:2000 Second Edition Information Technology - Message Handling Systems (MHS): MHS Routing - Guide for Messaging Systems Managers First Edition Information Technology - Telecommunications and Information Exchange between Systems - Operation of an X.25 Interworking Unit First Edition; NZS/ISO/IEC TR10029: 1989; AS 4015: 1992 Information technology Reference Model of Data Management First Edition Guidelines for the Preparation of Conformity Clauses in Programming Language Standards First Edition Information Technology - SGML and Text-Entry Systems - Guidelines for SGML Syntax-Directed Editing Systems First Edition (AS/NZS 4110: 1993)

ISO ISO ISO ISO ISO ISO ISO ISO ISO

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

Cylindrical gears Code of inspection practice Part 1: Inspection of corresponding flanks of gear teeth First Edition; Corrigendum 1: 08/01/2006 Cylindrical gears Code of inspection practice Part 2: Inspection related to radial composite deviations, runout, tooth thickness and TR 10064-2 backlash First Edition; Technical Corrigendum 1: 04-15-2001; Technical Corrigendum 2: 08/01/2006 Cylindrical gears Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism TR 10064-3 of axes First Edition; Technical Corrigendum 1: 08/01/2006 Cylindrical gears Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern TR 10064-4 checking First Edition; Technical Corrigendum 1: 08/01/2006 TR 10064-5 CORR Cylindrical gears ù Code of inspection practice ù Part 5: Recommendations relative to evaluation of gear measuring instruments 1 TECHNICAL CORRIGENDUM 1 First Edition Cylindrical gears ù Code of inspection practice ù Part 5: Recommendations relative to evaluation of gear measuring instruments First TR 10064-5 Edition TR 10091 Information Technology - Technical Aspects of 130 mm Optical Disk Cartridge Write-Once Recording Format First Edition TR 10108 Steel - Conversion of Hardness Values to Tensile Strength Values First Edition TR 10158 Principles and Rationale Underlying Calculation Methods in Relation to Fire Resistance of Structural Elements First Edition Information Technology - Telecommunications and Information Exchange Between Systems - List of Standard Data Layer Link Protocols that Utilize High-Level Data Link Control (HDLC) Classes of Procedures, List of Standard XID Format Identifiers, List of Standard Mode-Setting Information Field Format Identifiers, and List of Standard User-Defined Parameter Set Identification Values TR 10171 Second Edition Information Technology - Telecommunications and Information Exchange Between Systems - Network/Transport Protocol TR 10172 Interworking Specification First Edition; AS/NZS 4104: 1993 TR 10176 Information Technology - Guidelines for the Preparation of Programming Language Standards Fourth Edition Information Technology - Programming Languages, Their Environments and System Software Interfaces - Guidelines for Language TR 10182 Bindings First Edition Information Technology - Text and Office Systems - Office Document Architecture (ODA) and Interchange Format - Technical Report TR 10183-1 on ISO 8613 Implementation Testing - Part 1: Testing Methodology First Edition Information Technology - Text and Office Systems - Office Document Architecture (ODA) and Interchange Format - Technical Report TR 10183-2 on ISO 8613 Implementation Testing - Part 2: Framework for Abstract Test Cases First Edition TR 10192-2 Information Technology - Home Electronic System (HES) Interfaces - Part 2: Simple Interface Type 1 First Edition TR 10194 Non-Round General Use Light Gauge Metal Containers - Nominal Filling Volumes and Nominal Cross-Sections First Edition TR 10201 Aerospace - Standards for Electronic Instruments and Systems Fourth Edition TR 10217 Solar Energy - Water Heating Systems - Guide to Material Selection with Regard to Internal Corrosion First Edition General-Purpose Flat Pallets for Through Transit of Goods - Design Rating and Maximum Working Load First Edition; Corrigendum TR 10232 1: 1992 TR 10233 General-Purpose Flat Pallets for Through Transit of Goods - Performance Requirements First Edition TR 10064-1

ISO

TR 10303-12

ISO

TR 10303-307

ISO

TR 10305-1

ISO

TR 10305-2

ISO

TR 10314-1

ISO

TR 10314-2

ISO

TR 10358

ISO

TR 10450

ISO

TR 10465-2

ISO ISO ISO

TR 10465-3 TR 10476 TR 10488

ISO ISO ISO ISO ISO ISO

TR 10495 TR 10501 TR 10593 TR 10603 TR 10652 TR 10657

ISO

TR 10719

Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 12: Description Methods: The EXPRESS-I Language Reference Manual First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 307: Abstract Test Suite: Sheet Metal Die Planning and Design First Edition Road vehicles Calibration of electromagnetic field strength measuring devices Part 1: Devices for measurement of electromagnetic fields at frequencies> 0 Hz First Edition Road vehicles Calibration of electromagnetic field strength measuring devices Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz First Edition Industrial Automation - Shop Floor Production - Part 1: Reference Model for Standardization and a Methodology for Identification of Requirements First Edition Industrial Automation - Shop Floor Production - Part 2: Application of the Reference Model for Standardization and Methodology First Edition Plastics Pipes and Fittings - Combined Chemical-Resistance Classification Table First Edition; [Cancelled: UNI UNI ISO/TR 7471:1983, UNI UNI ISO/TR 7472:1983, UNI UNI ISO/TR 7473:1983, UNI UNI ISO/TR 7474:1983] Industrial Automation Systems and Integration - Operating Conditions for Discrete Part Manufacturing - Equipment in Industrial Environments First Edition Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) ù Part 2: Comparison of static calculation methods Second Edition Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) ù Part 3: Installation parameters and application limits Second Edition Doorsets - Assessment of Burglar-Proofness First Edition Graphical Symbols Incorporating Arrows - Synopsis First Edition Cylindrical Gears - Calculation of Service life Under Variable Load - Conditions for Cylindrical Gears in Accordance with ISO 6336 First Edition Thermoplastics Pipes for the Transport of Liquids Under Pressure - Calculation of Head Losses First Edition Micrographics - Use of Microfilm Jackets First Edition Road Vehicles - Legal Situation Concerning Lighting and Light- Signalling Devices First Edition Standard Sizing Systems for Clothes First Edition Explanatory Notes on ISO 76 First Edition Steel and Iron - Determination of Non-Combined Carbon Content - Infrared Absorption Method After Combustion in an Induction Furnace First Edition

ISO ISO ISO

TR 10730 TR 10828 TR 10837

Information Technology - Open Systems Interconnection - Tutorial on Naming and Addressing First Edition; SAA/SNZ HB68: 1995 Worms Gears - Geometry of Worm Profiles First Edition; Technical Corrigendum 1: 11/01/1998 Determination of the Thermal Stability of Polyethylene (PE) for Use in Gas Pipes and Fittings First Edition

ISO

TR 10949

ISO ISO ISO ISO ISO ISO ISO ISO

TR 10982 TR 11017 TR 11018 TR 11065 TR 11069 TR 11071-1 TR 11071-2 TR 11079

ISO ISO ISO ISO ISO ISO ISO

Hydraulic Fluid Power - Component Cleanliness - Guidelines for Achieving and Controlling Cleanliness of Components from Manufacture to Installation Second Edition

Road Vehicles - Test Procedures for Evaluating Out-Of-Position Vehicle Occupant Interactions with Deploying Air Bags First Edition Information Technology - Framework for Internationalization First Edition Essential Oils - General Guidance on the Determination of Flashpoint First Edition Industrial Automation Glossary First Edition Aluminium Structures - Material and Design - Ultimate Limit State under Static Loading First Edition; Corrigendum 1: 1996 Comparison of worldwide lift safety standards Part 1: Electric lifts (elevators) Second Edition Comparison of worldwide lift safety standards Part 2: Hydraulic lifts (elevators) Second Edition Evaluation of Cold Environments - Determination of Required Clothing Insulation (IREQ) First Edition Lasers and laser-related equipment ù Test methods for laser beam widths, divergence angles and beam propagation ratios ù Part 3: TR 11146-3 CORR Intrinsic and geometrical laser beam classification, propagation and details of test methods TECHNICAL CORRIGENDUM 1 First 1 Edition Lasers and laser-related equipment ù Test methods for laser beam widths, divergence angles and beam propagation ratios ù Part 3: TR 11146-3 Intrinsic and geometrical laser beam classification, propagation and details of test methods First Edition TR 11172-5 CORR Information technology ù Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s ù Part 5: 1 Software simulation TECHNICAL CORRIGENDUM 1 First Edition Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part TR 11172-5 5: Software Simulation First Edition TR 11175 Dental Implants - Guidelines for Developing Dental Implants First Edition TR 11211 Grading Polished Diamonds - Terminology and Classification First Edition TR 11295 Techniques for Rehabilitation of Pipeline Systems by the Use of Plastics Pipes and Fittings First Edition

ISO ISO ISO

TR 11328 TR 11330 TR 11332

Measurement of Liquid Flow in Open Channels - Equipment for the Measurement of Discharge Under Ice Conditions First Edition Determination of Volume of Water and Water Level in Lakes and Reservoirs First Edition Hydrometric Determinations - Unstable Channels and Ephemeral Streams First Edition

ISO ISO ISO ISO ISO

TR 11340 TS 11405 TR 11422 TR 11434 TR 11444

ISO

TR 11548-1

Rubber and Rubber Products - Hydraulic Hose Assemblies - External Leakage Classification for Hydraulic Systems First Edition Dental Materials - Testing of Adhesion to Tooth Structure Second Edition Iron Ores - Recommended Procedures for Iron Ore Dissolution Using Either Acid Digestion or Alkali Fusion First Edition Nickel Alloys - Determination of Niobium and Tantalum - Ion Exchange Method First Edition Quality of Sawn Wood Used for the Construction of Pallets First Edition Communication Aids for Blind Persons - Identifiers, Names and Assignation to Coded Character Sets for 8-Dot Braille Characters Part 1: General Guidelines for Braille Identifiers and Shift Marks First Edition

ISO

TR 11548-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

TR 11552 TR 11580 TR 11589 TR 11590 TR 11610 TR 11627 TR 11637 TR 11647 TR 11656 TR 11688-1

ISO

TR 11688-2

ISO

TR 11690-3

ISO ISO

TR 11696-1 TR 11696-2

ISO ISO

TR 11728 TR 11761

ISO ISO

TR 11762 TR 11776

ISO

TR 11802-1

ISO

TR 11802-2

ISO ISO

TR 11802-5 TR 11842

Communication Aids for Blind Persons - Identifiers, Names and Assignation to Coded Character Sets for 8-Dot Braille Characters Part 2: Latin Alphabet Based Character Sets First Edition Lasers and Laser-Related Equipment - Laser Materials-Processing Machines - Performance Specifications and Benchmarks for Cutting of Metals First Edition Information technology ù Framework for describing user interface objects, actions and attributes First Edition Information Technology - Open Systems Interconnection - LOTOS Description of the CCR Service First Edition Information Technology - Open Systems Interconnection - LOTOS Description of the CCR Protocol First Edition Protective clothing Vocabulary VÛtements de protection Vocabulaire First Edition Measurement of Liquid Flow in Open Channels - Computing Stream Flow Using an Unsteady Flow Model First Edition Boron Treated Engineering Steels for Quenching and Tempering First Edition Fusion Compatibility of Polyethylene (PE) Pipes and Fittings First Edition Measurement of Liquid Flow in Open Channels - Mixing Length of a Tracer First Edition Acoustics - Recommended Practice for the Design of Low-Noise Machinery and Equipment - Part 1: Planning First Edition Acoustics - Recommended Practice for the Design of Low-Noise Machinery and Equipment - Part 2: Introduction to the Physics of Low-Noise Design First Edition Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 3: Sound Propagation and Noise Prediction in Workrooms First Edition Uses of Reaction to Fire Test Results - Part 1: Application of Test Results to Predict Fire Performance of Internal Linings and Other Building Products First Edition Uses of Reaction to Fire Test Results - Part 2: Fire Hazard Assessment of Construction Products First Edition Anodized Aluminium and Aluminium Alloys - Accelerated Test of Weather Fastness of Coloured Anodic Oxide Coatings Using Cyclic Artificial Light and Pollution Gas First Edition Light-Gauge Metal Containers - Round Open-Top Cans - Classification of Can Sizes by Construction Type First Edition; Light-Gauge Metal Containers - Round Open-Top Cans for Liquid Products with Added Gas - Classification of Can Sizes by Construction Type First Edition; Light Gauge Metal Containers - Non-Round Open-Top Cans - Cans Defined by Their Nominal Capacities First Edition; Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Technical reports and guidelines Part 1: The structure and coding of Logical Link Control addresses in Local Area Networks Fourth Edition Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Technical reports and guidelines Part 2: Standard Group MAC Addresses Sixth Edition Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks Technical Reports and Guidelines - Part 5: Media Access Control (MAC) Bridging of Ethernet V2.0 in Local Area Networks First Edition; ANSI/IEEE Std 802.1H Road Vehicles - Comparison of Statutory Photometric Requirements in Various Countries for Lighting Devices First Edition

Water Quality - Determination of Nitrogen - Part 2: Determination of Bound Nitrogen, After Combustion and Oxidation to Nitrogen Dioxide, Using Chemiluminescence Detection First Edition Reaction to Fire Tests - Ignitability of Building Products Subjected to Direct Impingement of Flame - Part 1: Guidance on Ignitability First Edition Information and Documentation - Transliteration of Korean Script into Latin Characters First Edition Iron Ores - Currently Traded International Ores First Edition Guidance on Airway Management During Laser Surgery of Upper Airway First Edition Micrographics - Inspection of Silver-Gelatin Microforms for Evidence of Deterioration First Edition Micrographics - Expungement, Deletion, Correction or Amendment of Records on Microforms First Edition

ISO

TR 11905-2

ISO ISO ISO ISO ISO ISO

TR 11925-1 TR 11941 TR 11945 TR 11991 TR 12031 TR 12036

ISO

TR 12037

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

TR 12075 TR 12155 TR 12182 TR 12198 TR 12343 TR 12349-1 TR 12349-2 TR 12350 TR 12351 TR 12369 TR 12382

Electronic Imaging - Recommendations for the Expungement of Information Recorded on Write-Once Optical Media First Edition Information Technology - Customer Premises Cabling - Planning and Installation Guide to Support ISO/IEC 8802-5 Token Ring Stations First Edition Commercial Vehicles - Obstacle Detection Device During Reversing - Requirements and Tests First Edition Information Technology - Categorization of Software First Edition Aerospace - Rivets, Solid - Materials Aeronautique Et Espace - Rivets Ordinaires - Materiaux First Edition Road Vehicles - Symbols for Electrotechnical Diagrams First Edition Road Vehicles - Dummies for Restraint System Testing - Part 1: Adult Dummies First Edition Road Vehicles - Dummies for Restraint System Testing - Part 2: Chid Dummies First Edition Road vehicles Injury risk curves for evaluation of occupant protection in side impact First Edition Road Vehicles - Determination of Head Contact and Duration in Impact Tests First Edition Agricultural Tractors and Machinery - Electrical Power Transmission Connector First Edition; Amendment 1: 12-01-1999 Permuted Index of the Vocabulary of Information Technology Second Edition

ISO

TR 12391-1

Gas Cylinders - Refillable Seamless Steel - Performance Tests - Part 1: Philosophy, Background and Conclusions First Edition

ISO

TR 12391-2

Gas cylinders Refillable seamless steel Performance tests Part 2: Fracture performance tests Monotonic burst tests First Edition

ISO ISO ISO

TR 12391-3 TR 12391-4 TR 12470

ISO ISO

TR 12471 TR 12603

ISO

TR 12654

Gas cylinders Refillable seamless steel Performance tests Part 3: Fracture performance tests Cyclical burst tests First Edition Gas cylinders Refillable seamless steel Performance tests Part 4: Flawed-cylinder cycle test First Edition Fire Resistance Tests - Guidance on the Application and Extension of Results First Edition Computational structural fire design Review of calculation models, fire tests for determining input material data and needs for further development First Edition Building Construction Machinery and Equipment - Classification First Edition Electronic Imaging - Recommendations for the Management of Electronic Recording Systems for the Recording of Documents that May Be Required as Evidence, on WORM Optical Disk First Edition

ISO

TR 12662

ISO

TR 12735-2

ISO

TR 12764

ISO ISO

TR 12767 TR 12776

Certification Scheme for Prestressing Steels First Edition Mechanical Testing of Metals - Symbols Used with Their Definitions - Part 2: Recommendations for the Development of Symbols and Definitions First Edition Measurement of Fluid Flow in Closed Conduits - Flowrate Measurement by Means of Vortex Shedding Flowmeters Inserted in Circular Cross-Section Conduits Running Full First Edition Measurement of fluid flow by means of pressure differential devices ù Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167 Second Edition Pallets - Slip Sheets First Edition

ISO ISO

TR 12960 TR 13214

Geotextiles and Geotextile-Related Products - Screening Test Method for Determining the Resistance to Liquids First Edition Road Vehicles - Child Restraint Systems - Compilation of Regulations and Standards First Edition

ISO

TR 13219

ISO ISO

TR 13233 TR 13243

ISO ISO

TR 13283 TR 13298

ISO

TR 13309

ISO ISO

TR 13335-3 TR 13335-4

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

TR 13335-5 TR 13352 TR 13387-1 TR 13387-2 TR 13387-3 TR 13387-4 TR 13387-5 TR 13387-6 TR 13387-7 TR 13387-8 TR 13425

Road Vehicles - Risk of Thoracic Injury Associated with Hybrid III Sternal Deflection Due to Shoulder Belt Loading First Edition Information Technology - Interpretation of Accreditation Requirements in ISO/IEC Guide 25 - Accreditation of Information Technology and Telecommunications Testing Laboratories for Software and Protocol Testing Services First Edition Information Technology - Quality of Service - Guide to Methods and Mechanisms First Edition Industrial Automation - Time-Critical Communications Architectures - User Requirements and Network Management for Time-Critical Communications Systems First Edition Ships and Marine Technology - Vocabulary of General Terms First Edition Manipulating Industrial Robots - Informative Guide on Test Equipment and Metrology Methods of Operation for Robot Performance Evaluation in Accordance with ISO 9283 First Edition Information Technology - Guidelines for the Management of IT Security - Part 3: Techniques for the Management of IT Security First Edition Information Technology - Guidelines for the Management of IT Security - Part 4: Selection of Safeguards First Edition Information Technology - Guidelines for the Management of IT Security - Part 5: Management uidance on Network Security First Edition Guidelines for Interpretation of ISO 9000 Series for Application within the Iron Ore Industry First Edition Fire Safety Engineering - Part 1: Application of Fire Performance Concepts to Design Objectives First Edition Fire Safety Engineering - Part 2: Design Fire Scenarios and Design Fires First Edition Fire Safety Engineering - Part 3: Assessment and Verification of Mathematical Fire Models First Edition Fire Safety Engineering - Part 4: Initiation and Development of Fire and Generation of Fire Effluents First Edition Fire Safety Engineering - Part 5: Movement of Fire Effluents First Edition Fire Safety Engineering - Part 6: Structural Response and Fire Spread Beyond the Enclosure of Origin First Edition Fire Safety Engineering - Part 7: Detection, Activation and Suppression First Edition Fire Safety Engineering - Part 8: Life Safety - Occupant Behaviour, Location and Condition First Edition Guidelines for the selection of statistical methods in standardization and specification Third Edition

ISO ISO ISO

TR 13434 TR 13487 TR 13530

Geotextiles and Geotextile-Related Products - Guidelines on Durability First Edition Braking of Road Vehicles - Considerations on the Definition of Mean Fully Developed Deceleration First Edition Water Quality - Guide to Analytical Quality Control for Water Analysis First Edition Information Technology - Telecommunications and Information Exchange between Systems - Protocol Combinations to Provide and Support the OSI Network Service First Edition Information Technology - Guidelines for Effective Use of Optical Disk Cartridges Conforming to ISO/IEC 10090 First Edition Technical Product Documentation - Organization and Naming of Layers for CAD - Part 3: Application of ISO 13567-1 and ISO 135672 First Edition Financial services Information security guidelines Third Edition

ISO ISO

TR 13532 TR 13561

ISO ISO

TR 13567-3 TR 13569

ISO ISO ISO ISO ISO ISO

TR 13570-1 TR 13593 TR 13594 TR 13668 TR 13739 TR 13763

ISO ISO ISO

TR 13818-5 TR 13841 TR 13843

ISO

TR 13849-100

Wheelchairs Part 1: Guidelines for the application of the ISO 7176 series on wheelchairs First Edition: Replaces ISO TR 13570:2001 Enclosed gear drives for industrial applications First Edition; Technical Corrigendum: 12/15/2005 Information Technology - Lower Layers Security First Edition Digital Coding of Oral Health and Care First Edition Petroleum Products - Methods for Specifying Practical Procedures for the Transfer of Bunker Fuels to Ships First Edition Safety and Performance Criteria for Seamless Gas Cylinders First Edition; Corrigendum 1: 1996 Information Technology - Generic Coding of Moving Pictures and Associated Audio Information - Part 5: Software Simulation Second Edition Information Technology - Guidance on Measurement Techniques for 90 mm Optical Disk Cartridges First Edition Water Quality - Guidance on Validation of Microbiological Methods First Edition Safety of Machinery - Safety-Related Parts of Control Systems - Part 100: Guidelines for the Use and Application of ISO 13849-1 First Edition

ISO ISO

TR 13881 TR 13883

Petroleum and Natural Gas Industries - Classification and Conformity Assessment of Products, Processes and Services First Edition Plastics - Guide to the Writing of Test Methods First Edition

ISO

TR 13989-1

Calculation of Scuffing Load Capacity of Cylindrical, Bevel and Hypoid Gears - Part 1: Flash Temperature Method Fisrt Edition

ISO ISO ISO

TR 13989-2 TR 14032 TR 14047

ISO

TR 14049

ISO ISO

TR 14061 TR 14062

Calculation of Scuffing Load Capacity of Cylindrical, Bevel and Hypoid Gears - Part 2: Integral Temperature Method First Edition Environmental Management - Examples of Environmental Performance Evaluation (EPE) First Edition Environmental management Life cycle impact assessment Examples of application of ISO 14042 First Edition Environmental Management - Life Cycle Assessment - Examples of Application of ISO 14041 to Goal and Scope Definition and Inventory Analysis First Edition Information to Assist Forestry Organizations in the Use of Environmental Management System Standards ISO 14001 and ISO 14004 First Edition Environmental Management - Integrated Environmental Aspects into Product Design and Development First Edition

Electronic Imaging - Human and Organizational Issues for Successful Electronic Image Management (EIM) Implementation First Edition Information Technology - Software Measurement - Functional Size Measurement - Part 3: Verification of Functional Size Measurement Methods First Edition Information Technology - Software Measurement - Functional Size Measurement - Part 4: Reference Model First Edition Information technology Software measurement Functional size measurement Part 5: Determination of functional domains for use with functional size measurement First Edition Information technology Software measurement Functional size measurement Part 6: Guide for use of ISO/IEC 14143 series and related International Standards First Edition Information technology û Fibre channel û Part 117: Methodologies for jitter and signal quality (MJSQ) First Edition Classification of Information in the Construction Industry First Edition Gears - Part 1: Thermal Rating First Edition Gears - Thermal Capacity Part 2: Thermal Load-Carrying Capacity First Edition Implants for surgery Fundamental principles Second Edition Sintered Metal Materials, Excluding Hardmetals - Metallographic Preparation and Examination First Edition Information Technology - Programming Languages, Their Environments and System Software Interfaces - Guidelines for the Preparation of Language-Independent Service Specifications (LISS) First Edition Information Technology - Software Engineering - Guidelines for the Adoption of CASE Tools First Edition Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network Architecture and Scenarios for Private Integrated Services Networking Second Edition Information technology Coding of audio-visual objects Part 7: Optimized reference software for coding of audio-visual objects Second Edition Information technology Coding of audio-visual objects Part 9: Reference hardware description First Edition Textiles - Industrial Laundering Procedures for Textile Rental and Industrial Laundering First Edition

ISO

TR 14105

ISO ISO

TR 14143-3 TR 14143-4

ISO

TR 14143-5

ISO ISO ISO ISO ISO ISO ISO

TR 14143-6 TR 14165-117 TR 14177 TR 14179-1 TR 14179-2 TR 14283 TR 14321

ISO ISO

TR 14369 TR 14471

ISO

TR 14475

ISO ISO ISO

TR 14496-7 TR 14496-9 TR 14510

ISO

TR 14516

ISO ISO ISO ISO

TR 14543-4 TR 14564 TR 14569-1 TR 14600

Information Technology - Security Techiques - Guidelines for the Use and Management of Trusted Third Party Services First Edition Information Technology - Home Eectronic System (HES) Architecture - Part 4: Home and Building Automation in a Mixed-Use Building First Edition Shipbuilding and Marine Structures - Marking of Escape Routes First Edition Dental materials ù Guidance on testing of wear ù Part 1: Wear by toothbrushing First Edition [Superseded: ISO TS 14569-1] Gas Cylinders - International Quality Conformance System - Basic Rules First Edition; Corrected and Reprinted 12/01/2000

ISO ISO ISO ISO

TR 14618 TR 14638 TR 14645 TR 14652

Middle Atmosphere - Global Model at Altitudes Between 30 km and 120 km, and Wind Model at Altitudes Above 30 km First Edition Geometrical Product Specification (GPS) - Masterplan First Edition Road Vehicles - Test Procedures for Evaluating Child Restraint System Interactions with Deploying Air Bags First Edition Information technology Specification method for cultural conventions First Edition

ISO

TR 14672

ISO

TR 14685

ISO

TR 14696

ISO ISO

TR 14759 TR 14762

ISO ISO

TR 14763-2 TR 14799-1

ISO

TR 14799-2

ISO

TR 14813-2

ISO

TR 14813-3

ISO

TR 14813-4

ISO

TR 14813-5

ISO ISO ISO

TR 14813-6 TR 14933 TR 14936

ISO

TR 14969

ISO

TR 14999-1

ISO

TR 14999-2

ISO

TR 14999-3

ISO ISO

TR 15031-2 TR 15044

Graphic Technology - Statistics of the Natural SCID Images Defined in ISO 12640 First Edition Hydrometric Determinations - Geophysical Logging of Boreholes for Hydrogeological Purposes - Considerations and Guidelines for Making Measurements First Edition Reaction to Fire Tests - Determination of Fire Parameters of Materials, Products and Assemblies Using an Intermediate-Scale Heat Release Calorimeter (ICAL) First Edition Software Engineering - Mock up and Prototype - A Categorization of Software Mock up and Prototype Models and Their Use First Edition Information Technology - Home Control Systems - Guidelines for Functional Safety First Edition Information Technology - Implementation and Operation of Customer Premises Cabling - Part 2: Planning and Installation First Edition Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison First Edition Comparison of worldwide escalator and moving walk safety standards Part 2: Abbreviated comparison and comments First Edition Transport Information and Control Systems - Reference Model Architecture(s) for the TICS Sector - Part 2: Core TICS Reference Architecture First Edition Transport Information and Control Systems - Reference Model Architecture(s) for the TICS Sector - Part 3: Example Elaboration First Edition Transport Information and Control Systems - Reference Model Architecture(s) for the TICS Sector - Part 4: Reference Model Tutorial First Edition Transport Information and Control Systems - Reference Model Architecture(s) for the TICS Sector - Part 5: Requirements for Architecture Description in TICS Standards First Edition Transport Information and Control Systems - Reference Model Architecture(s) for the TICS Sector - Part 6: Data Presentation in ASN.1 First Edition Road Vechicles - Test Procedure for Evaluating Occupant Interactions with Deploying Side Impact Airbags First Edition Metallic Materials - Strain Analysis Report First Edition Medical devices Quality management systems Guidance on the application of ISO 13485:2003 First Edition; Replaces ISO 14969:1999 Optics and photonics Interferometric measurement of optical elements and optical systems Part 1: Terms, definitions and fundamental relationships First edition Optics and photonics Interferometric measurement of optical elements and optical systems Part 2: Measurement and evaluation techniques First edition Optics and photonics Interferometric measurement of optical elements and optical systems Part 3: Calibration and validation of interferometric test equipment and measurements First edition Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 2: Terms, definitions, abbreviations and acronyms First Edition Information Technology - Terminology for the Home Electronic System (HES) First Edition

ISO

TR 15067-2

Information Technology - Home Electronic Systems (HES) Application Model - Part 2: Lighting Model for HES First Edition Information Technology - Home Electronic Systems (HES) Application Model - Part 3: Model of an Energy Management System for HES First Edition

ISO

TR 15067-3

ISO ISO ISO

TR 15067-4 TR 15069 TR 15070 AMD 2

Information Technology - Home Electronic Systems (HES) Application Model - Part 4: Security System for HES First Edition Series 1 Freight Containers - Handling and Securing - Rationale for ISO 3874 Annex A First Edition Series 1 freight containers ù Rationale for structural test criteria AMENDMENT 2 First Edition

ISO ISO ISO

TR 15070 AMD 1 TR 15070 TR 15155

ISO ISO ISO

TR 15235 TR 15271 TR 15285

Series I freight containers - Rationale for structural test criteria AMENDMENT 1 : Guidance on structural integrity First edition Series 1 freight containers Rationale for structural test criteria First edition Test facilities for agricultural irrigation equipment First edition Preparation of Steel Substrates Before Application of Paints and Related Products - Collected Information on the Effect of Levels of Water-Soluble Salt Contamination First Edition Information Technology - Guide for ISO/IEC 12207 (Software Life Cycle Processes) First Edition Information Technology - An Operational Model for Characters and Glyphs First Edition

ISO ISO

TR 15294 TR 15300

ISO

TR 15349-1

ISO

TR 15349-3

ISO ISO ISO

TR 15377 TR 15403-2 TR 15409

ISO ISO ISO

TR 15410 TR 15413 TR 15440

ISO

TR 15443-1

Information technology Security techniques A framework for IT security assurance Part 1: Overview and framework First Edition

ISO

TR 15443-2

Information technology Security techniques A framework for IT security assurance Part 2: Assurance methods First Edition

ISO

TR 15446

Information technology Security techniques Guide for the production of Protection Profiles and Security Targets First Edition

Information Technology - Methods for Data Flow Control at Synchronous and Asynchronous DTE-DCE Interfaces First Edition Dentistry - Application of OSI Clinical Codification to the Classification and Coding of Dental Products First Editon Unalloyed Steel - Determination of Low Carbon Content - Part 1: Infrared Absorption Method After Combustion in an Electric Resistance Furnace (By Peak Separation) First Edition Unalloyed Steel - Determination of Low Carbon Content - Part 3: Infrared Absorption Method After Combustion in an Electric Resistance Furnace (With Preheating) First Edition Measurement of fluid flow by means of pressure-differential devices ù Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 Second edition Natural gas Natural gas for use as a compressed fuel for vehicles Part 2: Specification of the quality First Edition Road Vechicles - Heat Rating of Spark Plugs First Edition Information Technology - Telecommunications and Information Exchange between Systems - PISN Mobility-General Principles and Services Aspects First Edition Information Technology - Font Services - Abstract Service Definition First Edition Information technology Future keyboards and other associated input devices and related entry methods First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

TR 15452 TR 15461 TR 15462 TR 15489-2 TR 15497 TR 15580 TR 15581 TR 15599 CORR 1 TR 15599 TR 15608

ISO

TR 15655

Information Technology - Specification of Data Value Domains First Edition Steel Forgings - Testing Frequency, Sampling Conditions and Test Methods for Mechanical Tests First Edition Water quality Selection of tests for biodegradability Second Edition Information and Documentation - Records Management - Part 2: Guidelines First Edition Road Vehicles - Development Guidelines for Vehicle Based Software First Edition Information Technology - Programming Languages - Fortran - Floating-Point Exception Handling Second Edition Information Technology - Programming Languages - Fortran - Enhanced Data Type Facilities Second Edition Digital codification of dental laboratory procedures TECHNICAL CORRIGENDUM 1 First Edition Digital Codification of Dental Laboratory Procedures First Edition Welding - Guidelines for a Metallic Materials Grouping System Second Edition Fire Resistancve - Tests for Thermo-Physical and Mechanical Properties of Structural Materials at Elevated Temperatures for Fire Engineering Design First Edition

ISO

TR 15656

Fire resistance Guidelines for evaluating the predictive capability of calculation models for structural fire behaviour First Edition

ISO ISO

TR 15766 TR 15801

ISO ISO ISO ISO ISO ISO ISO

Road Vehicles - Pedestrian Protection - Targets for the Assessment of the Biofidelity of Pedestrian-Leg Test Devices First Edition Electronic imaging Information stored electronically Recommendations for trustworthiness and reliability First Edition Sterilization of Health Care Products - Radiation Sterilization - Selection of Sterilization Dose for a Single Production Batch First TR 15844 Edition TR 15855 Copper, Lead and Zinc Sulfide Concentrates - Step-by-Step Procedure for the Testing of Static Scales First Edition TR 15916 Basic considerations for the safety of hydrogen systems First Edition TR 15931 Designation system for cast irons and pig irons First Edition Information technology ù Multimedia content description interface ù Part 8: Extraction and use of MPEG-7 descriptions AMENDMENT TR 15938-8 AMD 2 2: Extraction and use of MPEG-7 perceptual 3D shape descriptor First Edition TR 15938-8 CORR Information technology ù Multimedia content description interface ù Part 8: Extraction and use of MPEG-7 descriptions TECHNICAL 1 CORRIGENDUM 1 First Edition Information technology ù Multimedia content description interface ù Part 8: Extraction and use of MPEG-7 descriptions AMENDMENT TR 15938-8 AMD 1 1: Extensions of extraction and use of MPEG-7 descriptions First Edition

ISO ISO

TR 15938-8 TR 15938-11

ISO ISO ISO

TR 15942 TR 15947 TR 15969

Information technology ù Multimedia content description interface ù Part 8: Extraction and use of MPEG-7 descriptions First Edition Information technology - Multimedia content description interface - Part 11: MPEG-7 profile schemas First Edition Information Technology - Programming Languages - Guide for the Use of the Ada Programming Language in High Integrity Systems First Edition Information technology Security techniques IT intrusion detection framework First Edition Surface Chemical Analysis - Depth Profiling - Measurement of Sputtered Depth First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

Geometrical Product Specifications (GPS) - Systematic Errors and Contributions to Measurement Uncertainty of Length Measurement due to Thermal Influences First Edition Graphic technology Database architecture model and control parameter coding for process control and workflow (Database AMPAC) TR 16044 First Edition TR 16056-1 Health informatics Interoperability of telehealth systems and networks Part 1: Introduction and definitions First Edition TR 16056-2 Health informatics Interoperability of telehealth systems and networks Part 2: Real-time systems First Edition TR 16060 Destructive tests on welds in metallic materials Etchants for macroscopic and microscopic examination First Edition TR 16066 Graphic Technology - Standard Object Colour Spectra Database for Colour Reproduction Evaluation First Edition Medical devices Guidance on the selection of standards in support of recognized essential principles of safety and performance of TR 16142 medical devices Second Edition [Superseded By: AAMI TIR16142] Hydraulic Fluid Power - Calibration of Liquid Automatic Particle Counters - Procedures Used to Certify the Standard Reference TR 16144 Material SRM 2806 First Edition Piston-operated volumetric instruments Determination of uncertainty for volume measurements made using the photometric method TR 16153 First Edition TR 16323 Textiles Three-dimensional measuring apparatus for fabric appearance First Edition TR 16326 Software Engineering - Guide for the Application of ISO/IEC 12207 to Project Management First Edition Road vehicles Ergonomic aspects of in-vehicle presentation for transport information and control systems Warning systems First TR 16352 Edition TR 16386 Impact of Changes in ISO Fluid Power Particle Counting - Contamination Control and Filter Test Standards First Edition Information Technology - Generic Digital Audio-Visual Systems - Technical Report on ISO/IEC 16500 - Description of Digital AudioTR 16501 Visual Functionalities First Edition Geometrical Product Specifications (GPS) Linear and angular dimensioning and tolerancing: +/- limit specifications Step TR 16570 dimensions, distances, angular sizes and radii First Edition Lifts, escalators and passenger conveyors Comparison of worldwide standards on electromagnetic terference/electromagnetic TR 16764 compatibility First Edition TR 16765 CORR 1 Comparison of worldwide safety standards on lifts for firefighters TECHNICAL CORRIGENDUM 1 First Edition TR 16765 Comparison of Worldwide Safety Standards on Lifts for Firefighters First Edition TR 16806 Pneumatic fluid power Cylinders Load capacity of pneumatic slides and their presentation method First Edition Cranes Bridge and gantry cranes International Standards for design and manufacturing requirements and recommendations First TR 16880 Edition TR 16913 Plastics Pipes and Fittings - Definitinos of Types of Test First Edition TR 16982 Ergonomics of Human-System Interaction - Usability Methods Supporting Human-Centred Design First Edition TR 17055 Steel - Determination of Silicon Content - Inductively Coupled Plasma Atomic Emission Spectrometric Method First Edition TR 17119 Health informatics Health informatics profiling framework First Edition TR 17165-2 Hydraulic fluid power Hose assemblies Part 2: Recommended practices for hydraulic hose assemblies First Edition TR 17400 Space systems Space launch complexes, integration sites and other facilities General testing guidelines First Edition TR 16015

ISO

TR 17452

ISO

TR 17641-3

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

TR 17663 TR 17671-1 TR 17671-2 TR 17671-3 TR 17671-4 TR 17671-5 TR 17671-6 TR 17671-7 TR 17737 TR 17766

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

Intelligent transport systems ù Using UML for defining and documenting ITS/TICS interfaces First Edition Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 3: Externally loaded tests First edition

Welding - Guidelines for Quality Requirements for Heat Treatment in Connection with Welding and Allied Processes First Edition Welding - Recommendations for Welding of Metallic Materials - Part 1: General Guidance for Arc Welding First Edition Welding - Recommendations for Welding of Metallic Materials - Part 2: Arc Welding of Ferritic Steels Welding - Recommendations for Welding of Metallic Materials - Part 3: Arc Welding of Stainless Steels First Edition Welding - Recommendations for Welding of Metallic Materials - Part 4: Arc Welding of Stainless Steels First Edition Welding Recommendations for welding of metallic materials Part 5: Welding of clad steels First Edition Welding Recommendations for welding of metallic materials Part 6: Laser beam welding First Edition Welding Recommendations for welding of metallic materials Part 7: Electron beam welding First Edition Workplace air ù Guidelines for selecting analytical methods for sampling and analysing isocyanates in air First Edition Centrifugal pumps handling viscous liquids Performance corrections First edition Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel First TR 17784 Edition TR 17844 Welding Comparison of standardised methods for the avoidance of cold cracks First Edition TR 17944 Banking - Security and Other Financial Servies - Framework for Security in Financial Systems First Edition TR 18001 Information technology Radio frequency identification for item management Application requirements profiles First Edition Information technology Programming languages, their environments and system software interfaces Technical Report on C++ TR 18015 Performance First Edition TR 18016 Information technology Message Handling Systems (MHS) Interworking with Internet e-mail First Edition TR 18037 Programming languages C Extensions to support embedded processors First Edition TR 18044 Information technology Security techniques Information security incident management First Edition Information technology Automatic identification and data capture techniques Radio frequency identification device performance test TR 18046 methods First Edition Information technology Radio frequency identification device conformance test methods Part 2: Test methods for air interface TR 18047-2 communications below 135 kHz First Edition TR 18047-3 CORR Information technology ù Radio frequency identification device conformance test methods ù Part 3: Test methods for air interface 1 communications at 13,56 MHz TECHNICAL CORRIGENDUM 1 Information technology Radio frequency identification device conformance test methods Part 3: Test methods for air interface TR 18047-3 communications at 13,56 MHz First Edition Information technology Radio frequency identification device conformance test methods Part 4: Test methods for air interface TR 18047-4 communications at 2,45 GHz First Edition Information technology Radio frequency identification device conformance test methods Part 6: Test methods for air interface TR 18047-6 communications at 860 MHz to 960 MHz First Edition

ISO

TR 18047-7

ISO

TR 18053

ISO

TR 18057

ISO

TR 18112

ISO

TR 18124

Information technology Radio frequency identification device conformance test methods Part 7: Test methods for active air interface communications at 433 MHz First Edition Information Technology - Telecommunications and Information Exchange between Systems - Glossary of Definitions and Terminology for Computer Supported Telecommunications Applications (CSTA) Phase III Fisrt Edition Information technology Telecommunications and information exchange between systems Using ECMA-323 (CSTA XML) in a Voice Browser Environment First Edition Clinical laboratory testing and in vitro diagnostic test systems In vitro diagnostic medical devices for professional use Summary of regulatory requirements for information supplied by the manufacturer First Edition Plastics piping systems Multilayer M (metal) pipes Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO

TR 18307 TR 18392 TR 18394 TR 18492 TR 18529 TR 18569 TR 18690 TR 18930 TR 18931

Health Informatics - Interoperability and Compatibility in Messaging and Communication Standards - Key Characteristics First Edition Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for determining backgrounds First Edition Surface chemical analysis Auger electron spectroscopy Derivation of chemical information First Edition Long-term preservation of electronic document-based information First Edition Ergonomics - Ergonomics of Human-System Interaction - Human-Centred Lifecycle Process Descriptions First Edition Safety of machinery Guidelines for the understanding and use of safety of machinery standards First Edition Guidance for the selection, use and maintenance of safety, protective and occupational footwear First Edition Imaging Materials - Protocols for Outdoor Weathering Experiments First Edition Imaging Materials - Recommendations for Humidity Measurement and Control First Edition

ISO ISO ISO ISO ISO ISO

TR 19032 TR 19033 TR 19038 TR 19120 TR 19121 TR 19122

ISO ISO

TR 19319 TR 19358

Plastics Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions First Edition Technical Product Documentation - Metadata for Construction Documentation Fisrt Edition Banking and related financial services Triple DEA Modes of operation Implementation guidelines Fisrt Edition Geographic Information - Functional Standards First Edition Geographic Information - Imagery and Gridded Data First Edition Geographic information/Geomatics Qualification and certification of personnel First Edition Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Determination of lateral resolution, analysis area, and sample area viewed by the analyser First Edition Ergonomics - Construction and Application of Tests for Speech Technology First Edition

ISO

TR 19480

ISO

TR 19755

ISO

TR 19758 AMD 3

Polyethylene pipes and fittings for the supply of gaseous fuels or water Training and assessment of fusion operators First Edition Information technology Programming languages, their environments and system software interfaces Object finalization for programming language COBOL First Edition Information technology ù Document description and processing languages ù DSSSL library for complex compositions AMENDMENT 3: Extensions to multilingual compositions (North and South Asian compositions) First Edition

ISO

TR 19758 AMD 2

ISO

TR 19758 AMD 1

ISO ISO ISO

TR 19758 TR 19759 TR 19760

ISO

TR 19764

ISO

TR 19765

ISO ISO

TR 19766 TR 19767

ISO

TR 19769

ISO ISO

TR 19782 TR 19791

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

TR 19797 TR 19961 TR 20172 TR 20173 TR 20174 TR 20461 TR 20514 TR 20572 TR 20573 TR 20824 TR 20879 TR 20880 TR 20881 TR 20882

Information technology ù Document description and processing languages ù DSSSL library for complex compositions AMENDMENT 2: Extensions to multilingual compositions (South-East Asian compositions) First Edition Information technology ù Document description and processing languages ù DSSSL library for complex compositions AMENDMENT 1: Extensions to basic composition styles and tables First Edition Information technology ù Document description and processing languages ù DSSSL library for complex compositions First Edition Software Engineering Guide to the Software Engineering Body of Knowledge (SWEBOK) First Edition Systems engineering A guide for the application of ISO/IEC 15288 (System life cycle processes) First Edition Information technology Guidelines, methodology and reference criteria for cultural and linguistic adaptability in information technology products First Edition Information technology ù Survey of icons and symbols that provide access to functions and facilities to improve the use of information technology products by the elderly and persons with disabilities First Edition Information technology ù Guidelines for the design of icons and symbols accessible to all users, including the elderly and persons with disabilities First Edition Information technology Programming languages Fortran Enhanced Module Facilities First Edition Information technology Programming languages, their environments and system software interfaces Extensions for the programming language C to support new character data types First Edition Information technology Automatic identification and data capture techniques Effects of gloss and low substrate opacity on reading of bar code symbols First Edition Information technology Security techniques Security assessment of operational systems First Edition Information technology Office machines Device output of 16 colour scales, output linearization method (LM) and specification of the reproduction properties First Edition Cranes Safety code on mobile cranes First Edition Welding - Grouping systems for materials - European materials First Edition Welding Grouping systems for materials American materials First edition Welding Grouping systems for materials Japanese materials First edition Determination of Uncertainty for Volume Measurements Made Using the Gravimetric Method First Edition Health informatics Electronic health record Definition, scope and context First Edition Footwear ù Performance requirements for components for footwear ù Accessories First Edition Footwear Performance requirements for components for footwear Heels and top pieces First Edition Ophthalmic instruments ù Background for light hazard specification in ophthalmic instrument standards First Edition Footwear ù Performance requirements for components for footwear ù Uppers First Edition Footwear ù Performance requirements for components for footwear ù Outsoles First Edition Footwear ù Performance requirements for components for footwear ù Insoles First Edition Footwear ù Performance requirements for components for footwear ù Lining and insocks First Edition

Footwear ù Performance requirements for components for footwear ù Shanks First Edition [Superseded By: DS DS/CEN ISO/TR 20883]

ISO

TR 20883

ISO

TR 20943-1

Information technology Procedures for achieving metadata registry (MDR) content consistency Part 1: Data elements First Edition

ISO ISO ISO

TR 20943-3 TR 20983 TR 21000-1

ISO ISO ISO ISO

TR 21000-11 TR 21000-12 TR 21089 TR 21092

ISO

TR 21449

Information technology Procedures for achieving metadata registry content consistency Part 3: Value domains First Edition Information and documentation Performance indicators for electronic library services First Edition Information Technology - Multimedia Framework (MPEG-21) - Part1: Vision, Technologies and Strategy Second Edition Information technology Multimedia framework (MPEG-21) Part 11: Evaluation Tools for Persistent Association Technologies First Edition Information technology Multimedia framework (MPEG-21) Part 12: Test Bed for MPEG-21 Resource Delivery First edition Health informatics Trusted end-to-end information flows First Edition Essential oils Characterization First Edition Content Delivery and Rights Management Functional requirements for identifiers and descriptors for use in the music, film, video, sound recording and publishing industries First Edition

ISO

TR 21730

ISO ISO ISO ISO

TR 21890 TR 22134 TR 22157-2 TR 22221

ISO

TR 22250-1

ISO

TR 22305

ISO

TR 22335

ISO ISO

TR 22520 TR 22521

ISO ISO

TR 22588 TR 22648

Health informatics ù Use of mobile wireless communication and computing technology in healthcare facilities ù Recommendations for electromagnetic compatibility (management of unintentional electromagnetic interference) with medical devices Second Edition Information Technology - Telecommunications and Information Exchange between Systems - Interoperation of PISNs with IP Networks First Edition Practical guidelines for socioterminology First Edition Bamboo Determination of physical and mechanical properties Part 2: Laboratory manual First Edition Health informatics Good principles and practices for a clinical data warehouse First Edition Information Technology - Document Description and Processing Languages - Regular Language Description for XML (RELAX) - Part 1: RELAX Core First Edition Cigarettes Measurement of nicotinefree dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances First Edition Surface chemical analysis ù Depth profiling ù Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer First Edition Portable hand-held forestry machines A-weighted emission sound pressure levels at the operator┤s station Comparative data in 2002 First Edition Portable hand-held forestry machines Vibration emission values at the handles Comparative data in 2002 First Edition Optics and photonics Lasers and laser-related equipment Measurement and evaluation of absorption-induced effects in laser optical components First Edition Footwear ù Performance requirements for components for footwear ù Stiffeners and toepuffs First Edition

ISO

TR 22676

ISO

TR 22767

ISO ISO ISO

TR 22824 TR 22869 TR 22898

ISO

TR 22971

ISO

TR 22979

ISO

TR 23000-1

ISO ISO ISO

TR 23272 TR 23462 TR 23602

ISO ISO

TR 23627 TR 24094

ISO ISO ISO

TR 24098 TR 24430 TR 24498

ISO ISO

TR 24532 TR 24704

ISO

TR 24705

ISO

TR 24710

ISO

TR 24715

ISO

TR 24718

Prosthetics Testing of ankle-foot devices and foot units Guidance on the application of the test loading conditions of ISO 22675 and on the design of appropriate test equipment First Edition Information technology Telecommunications and information exchange between systems Using CSTA for SIP phone user agents (uaCSTA) First Edition Welding consumables Predicted and measured FN in specifications A position statement of the experts of IIW Commission IX First Edition Medical laboratories Guidance on laboratory implementation of ISO 15189:2003 First Edition Review of outputs for fire containment tests for buildings in the context of fire safety engineering First Edition Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results First Edition Ophthalmic implants Intraocular lenses Guidance on assessment of the need for clinical investigation of intraocular lens design modifications First Edition Information technology ù Multimedia application format (MPEG-A) ù Part 1: Purpose for multimedia application formats First edition Information technology Common Language Infrastructure (CLI) Technical Report on Information Derived from Partition IV XML File Second Edition Space systems ù Guidelines to define the management framework for a space project First Edition Toughness of chain steels First Edition Information technology Telecommunications and information exchange between systems Corporate Telecommunication Networks Mobility for Enterprise Communications First Edition Analysis of natural gas Validation methods for gaseous reference materials First Edition Intelligent transport systems ù System architecture, taxonomy and terminology ù Procedures for developing ITS deployment plans utilizing ITS system architecture First Edition Paints and varnishes Guidelines for the determination of the precision of a test method by interlaboratory trials First Edition Paper, board and pulps Estimation of uncertainty for test methods First Edition Intelligent transport systems Systems architecture, taxonomy and terminology Using CORBA (Common Object Request Broker Architecture) in ITS standards, data registries and data dictionaries First Edition Information Technology - Customer premises cabling for wireless access points First Edition Information technology Office machines Machines for colour image reproduction Method of specifying image reproduction of colour devices by digital and analog test charts First Edition Information technology Radio frequency identification for item management Elementary tag licence plate functionality for ISO/IEC 18000 air interface definitions First Edition Information technology Programming languages, their environments and system software interfaces Technical Report on the Conflicts between the ISO/IEC 9945 (POSIX) and the Linux Standard Base (ISO/IEC 23360) First Edition Information technology Programming languages Guide for the use of the Ada Ravenscar Profile in high integrity systems First Edition

ISO

TR 24722

ISO ISO ISO

TR 24731-1 TR 24741 TR 24746

ISO ISO ISO ISO ISO

TR 24750 TR 24774 TR 24857 TR 25107 TR 25108

ISO ISO

TR 25398 TR 25438

ISO

TR 25599

ISO ISO

TR 25679 TR 25901

ISO

TR 26905

ISO ISO

TR 27245 TR 27609

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

TR 27628 TR 27809 TR 28980 TS 2963 TS 3567 TS 3632-1 TS 3632-2 TS 3669-2 TS 3716 TS 4949

Information technology ù Biometrics ù Multimodal and other multibiometric fusion First Edition Information technology - Programming languages, their environments and system software interfaces - Extensions to the C library Part 1: Bounds-checking interfaces First Edition Information technology ù Biometrics tutorial First Edition Information technology Generic cabling for customer premises Mid-span DTE power insertion First Edition Information technology û Assessment and mitigation of installed balanced cabling channels in order to support 10GBASE-T First edition Software and systems engineering ù Life cycle management ù Guidelines for process description First Edition Synthetic industrial diamond grit products Single-particle compressive failure strength ôDiaTest-SIö system First edition Non-destructive testing Guidelines for NDT training syllabuses First Edition Non-destructive testing Guidelines for NDT personnel training organizations First Edition Earth-moving machinery Guidelines for assessment of exposure to whole-body vibration of ride-on machines Use of harmonized data measured by international institutes, organizations and manufacturers First Edition Information technology Common Language Infrastructure (CLI) Technical Report: Common Generics First Edition Cranes Jib cranes International Standards for design, manufacturing, use and maintenance requirements and recommendations First Edition Mechanical testing of metals - Symbols and definitions in published standards First Edition; Together with ISO 23718 replaces ISO TR 12735-1:1996 Welding and related processes ù Vocabulary Soudage et techniques connexes ù Vocabulaire First Edition Information technology Telecommunications and information exchange between systems Enterprise Communication in Next Generation Corporate Networks (NGCN) involving Public Next Generation Networks (NGN) First Edition Cranes ù Tower cranes ù International Standards for design, manufacture, use and maintenance requirements and recommendations First edition Vibration in hand-held tools ù Vibration measurement methods for grinders ù Evaluation of round-robin test First Edition Workplace atmospheres ù Ultrafine, nanoparticle and nano-structured aerosols ù Inhalation exposure characterization and assessment First edition Health informatics - Measures for ensuring patient safety of health software First Edition Ophthalmic optics ù Spectacle lenses ù Parameters affecting lens power measurement First Edition Cheese and processed cheese products Determination of citric acid content Enzymatic method First Edition Vacuum gauges - Calibration by direct comparison with a reference gauge First Edition Saffron (Crocus sativus L.) Part 1: Specification First Edition: Replaces ISO 3632-1; 1993 Saffron (Crocus sativus L.) Part 2: Test methods First Edition: Replaces ISO 3632-2; 1993 Vacuum technology - Bakable flanges - Part 2: Dimensions of knife-edge flanges First Edition Hydrometry Functional requirements and characteristics of suspendedsediment samplers First Edition;: 1977 Steel names based on letter symbols First Edition

ISO

TS 6090

ISO ISO

TS 7024 TS 7240-9

ISO ISO ISO

TS 7821 TS 8611-2 TS 8611-3

ISO

TS 9250-1

ISO ISO

TS 9250-2 TS 9941

ISO

TS 10272-2

ISO

TS 10303-27

ISO

TS 10303-28

ISO

TS 10303-35

ISO

TS 10303-304

ISO

TS 10303-324

ISO

TS 10303-325

ISO

TS 10303-332

ISO

TS 10303-1001

ISO

TS 10303-1002

Milk and dried milk, buttermilk and buttermilk powder, whey and whey powder Detection of phosphatase activity First Edition IDF/RM 82:2004(E) Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Thermoplastics Recommended practice for installation First Edition; Supersedes ISO TR 7024 Fire detection and alarm systems Part 9: Test fires for fire detectors First Edition Tobacco and tobacco products Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods First Edition; Replaces ISO TR 7821: 1982 Pallets for materials handling Flat pallets Part 2: Performance requirements and selection of tests First Edition Pallets for materials handling ù Flat pallets ù Part 3: Maximum working loads First Edition [Replaced: ISO 8611] Earth-moving machinery Multilingual listing of equivalent terms Part 1: General Engins de terrassement Liste multilingue de termes Úquivalents Partie 1: Termes gÚnÚraux First Edition Earth-moving machinery Multilingual listing of equivalent terms Part 2: Performance and dimensions Engins de terrassement Liste multilingue de termes Úquivalents Partie 2: Performance et dimensions First Edition Milk and canned evaporated milk Determination of tin content Spectrometric method Second Edition Microbiology of food and animal feeding stuffs Horizontal method for detection and enumeration of Campylobacter spp. Part 2: Colony-count technique First Edition; Together with ISO 10272-1: 2006 replaces ISO 10272: 1995 Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 27: Implementation Methods: Java TM Programming Language Binding to the Standard Data Access Interface with Internet/Intranet Extensions First Edition Industrial automation systems and integration Product data representation and exchange Part 28: Implementation methods: XML representations of EXPRESS schemas and data First Edition Industrial automation systems and integration Product data representation and exchange Part 35: Conformance testing methodology and framework: Abstract test methods for standard data access interface (SDAI) implementations First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 304: Abstract Test Suite: Mechanical Design Using Boundary Representation First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 324: Abstract Test Suite: Mechanical Product Definition for Process Plans Using Machining Features First Edition Industrial automation systems and integration Product data representation and exchange Part 325: Abstract test suite: Building elements using explicit shape representation First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 332: Abstract Test Suite: Technical Data Packaging Core Information and Exchange First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1001: Application Module: Appearance Assignment First Edition; CD-Rom Application Modules Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1002: Application Module: Colour First Edition

ISO

TS 10303-1003

ISO

TS 10303-1004

ISO

TS 10303-1005

ISO

TS 10303-1006

ISO

TS 10303-1007

ISO

TS 10303-1008

ISO

TS 10303-1009

ISO

TS 10465-1

ISO

TS 10811-1

Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1003: Application Module: Curve Appearance First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1004: Application Module: Elemental Geometric Shape First Edition; CD-Rom Application Modules Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1005: Application Module: Elemental Topology First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1006: Application Module: Foundation Representation Second Edition; CD-Rom Application Modules Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1007: Application Module: General Surface Appearance First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1008: Application Module: Layer Assignment First Edition Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1009: Application Module: Shape Appearance and Layers First Edition Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) ù Part 1: Installation procedures First Edition [Superseded: ISO TR 10465-1] Mechanical Vibration and Shock - Vibration and Shock in Buildings with Sensitive Equipment - Part 1: Measurement and Evaluation First Edition

ISO

TS 10811-2

Mechanical Vibration and Shock - Vibration and Shock in Buildings with Sensitive Equipment - Part 2: Classification First Edition

ISO

TS 10839

ISO

TS 10993-19

ISO ISO

TS 10993-20 TS 11073-92001

ISO

TS 11133-1

ISO ISO

TS 11133-2 TS 11139

ISO ISO

TS 11155-1 TS 11155-2

Polyethylene Pipes and Fittings for the Supply of Gaseous Fuels - Code of Practice for Design, Handling and Installation First Edition Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials First Edition Biological evaluation of medical devices Part 20: Principles and methods for immunotoxicology testing of medical devices First Edition Health informatics ù Medical waveform format ù Part 92001: Encoding rules First Edition Microbiology of Food and Animal Feeding Stuffs - Guidelines on Preparation and Production of Culture Media - Part 1: General Guidelines on Quality Assurance for the Preparation of Culture Media in the Laboratory First Edition Microbiology of food and animal feeding stuffs Guidelines on preparation and production of culture media Part 2: Practical guidelines on performance testing of culture media First Edition Sterilization of Health Care Products - Vocabulary Sterilisation Des Produits De Sante - Vocabulaire Second Edition Road Vehicles - Air Filters for Passenger Compartments - Part 1: Test for Particulate Filtration First Edition; Supersedes ISO TR 11155-1:1994 Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration First edition

ISO ISO ISO ISO

TS 11370 TS 11725 TS 12029 TS 12033

ISO ISO ISO

TS 12104 TS 12180-1 TS 12180-2

ISO ISO ISO ISO ISO ISO ISO

TS 12181-1 TS 12181-2 TS 12780-1 TS 12780-2 TS 12781-1 TS 12781-2 TS 12902

ISO

TS 12927

ISO ISO ISO ISO ISO ISO

TS 12928 TS 13353 TS 13399-2 TS 13399-3 TS 13399-4 TS 13399-5

ISO ISO

TS 13399-50 TS 13399-60

ISO ISO

TS 13399-100 TS 13474

ISO ISO

TS 13475-2 TS 13499

Water Quality - Determination of Selected Organic Plant-Treatment Agents - Automated Multiple Development (AMD) Technique First Edition; Corrected and Reprinted:06/01/2001 Solid Mineral Fuels Determination of Nitrogen Semi-Micro Gasification Method Electronic imaging ù Forms design optimization for electronic image management Second Edition Electronic Imaging - Guidance for Selection of Document Image Compression Methods First Edition Road vehicles Gearshift patterns Manual transmissions with power-assisted gearchange and automatic transmissions with manualgearshift mode First Edition Geometrical Product Specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form First Edition Geometrical Product Specifications (GPS) Cylindricity Part 2: Specification operators First Edition Geometrical Product Specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness First Edition; Replaces ISO 6318 Geometrical Product Specifications (GPS) Roundness Part 2: Specification operators First Edition Geometrical Product Specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness First Edition Geometrical Product Specifications (GPS) Straightness Part 2: Specification operators First Edition Geometrical Product Specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness First Edition Geometrical Product Specifications (GPS) Flatness Part 2: Specification operators First Edition Solid Mineral Fuels - Determination of Total Carbon, Hydrogen and Nitrogen - Instrumental Methods First Edition Lubricants, Industrial Oils and Related Products (Class L) - Family M (Metalworking) - Guidelines for Establishing Specifications First Edition Lubricants, Industrial Oils and Related Products (Class L) - Family R (Products for Temporary Protection Against Corrosion) Guidelines for Establishing Specifications First Edition Diesel Fuel and Petrol Filters for Internal Combustion Engines - Initial Efficiency by Particle Counting First Edition Cutting tool data representation and exchange Part 2: Reference dictionary for the cutting items First Edition Cutting tool data representation and exchange ù Part 3: Reference dictionary for tool items First Edition Cutting tool data representation and exchange ù Part 4: Reference dictionary for adaptive items First Edition Cutting tool data representation and exchange ù Part 5: Reference dictionary for assembly items First Edition Cutting tool data representation and exchange ù Part 50: Reference dictionary for reference systems and common concepts First Edition Cutting tool data representation and exchange ù Part 60: Reference dictionary for connection systems First Edition Cutting tool data representation and exchange Part 100: Definitions, principles and methods for reference dictionaries First Edition Acoustics - Impulse Sound Propagation for Environmental Noise Assessment First Edition Acoustics - Stationary Audible Warning Devices Used Outdoors - Part 2: Precision Methods for Determination of Sound Emission Quantities First Edition Road Vehicles - Multimedia Data Exchange Format for Impact Tests First Edition

ISO ISO

TS 13571 TS 13725

ISO ISO

TS 13732-2 TS 13762

ISO

TS 13899-1

ISO ISO ISO

TS 13899-3 TS 14048 TS 14167

ISO

TS 14253-2

ISO

TS 14253-3

ISO

TS 14256-1

ISO

TS 14415

ISO

TS 14423

ISO

TS 14425

ISO ISO ISO

TS 14505-1 TS 14569-2 TS 14798

ISO

TS 14822-1

ISO

TS 14904

ISO

TS 14907-1

Life-Threatening Components of Fire - Guidelines for the Estimation of Time Available for Escape Using Fire Data First Edition Hydraulic fluid power Cylinders Method for determining the buckling load First Edition Ergonomics of the Thermal Environment - Methods for the Assessment of Human Responses to Contact with Surfaces - Part 2: Human Contact with Surfaces at Moderate Temperature First Edition Particle Size Analysis - Small Angle X-ray Scattering Method First Edition Steel Determination of Mo, Nb and W contents in alloyed steel Inductively coupled plasma atomic emission spectrometric method Part 1: Determination of Mo content First Edition Steel Determination of Mo, Nb and W contents in alloyed steel Inductively coupled plasma atomic emission spectrometric method Part 3: Determination of W content First Edition Environmental Management - Life Cycle Assessment - Data Documentation Format First Edition Gas analysis General quality assurance aspects in the use of calibration gas mixtures Guidelines First Edition Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment - Part 2: Guide to the Estimation of Uncertainty in GPS Measurement, in Calibration of Measuring Equipment and in Product Verification First Edition Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements First Edition Soil Quality - Determination of Nitrate, Nitrite and Ammonium in Field-Moist Soils by Extraction with Potassium Chloride Solution Part 1: Manual Method First Edition Ergonomics of the thermal environment Application of International Standards to people with special requirements First edition Carbonaceous Materials Used in the Production of Aluminium - Cold-Ramming Pastes - Determination of Effective Binder Content and Aggregate Content by Extraction with Quinoline, and Determination of Aggregate Size Distribution First Edition Carbonaceous Materials Used in the Production of Aluminium - Cold-Ramming Pastes - Determination of Volatile-Matter Content of Unbaked Pastes First Edition Ergonomics of the thermal environment ù Evaluation of thermal environments in vehicles ù Part 1: Principles and methods for assessment of thermal stress First Edition Dental materials Guidance on testing of wear Part 2: Wear by two- and/or three body contact First Edition Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology Second Edition Traffic and Travel Information General specifications for medium-range pre-information via dedicated short-range communication Part 1: Downlink First Edition Road transport and traffic telematics Electronic fee collection (EFC) Interface specification for clearing between operators First Edition Road transport and traffic telematics Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures First Edition

ISO ISO ISO

TS 14907-2 TS 14934-1 TS 14934-4

ISO ISO

TS 15000-1 TS 15000-2

ISO ISO

TS 15000-3 TS 15000-4

ISO

TS 15000-5

ISO

TS 15007-2

ISO

TS 15077

ISO ISO

TS 15079 TS 15510

ISO ISO

TS 15530-3 TS 15539

ISO ISO

TS 15624 TS 15666

ISO ISO

TS 15694 TS 15696

ISO

TS 15768

ISO

TS 15769

ISO

TS 15827

ISO

TS 15874-7

Road transport and traffic telematics Electronic fee collection Test procedures for user and fixed equipment Part 2: Conformance test for the onboard unit application interface First Edition Reaction-to-fire tests Calibration and use of radiometers and heat flux meters Part 1: General principles First Edition Fire tests ù Calibration of heat flux meters ù Part 4: Guidance on the use of heat flux meters in fire tests First Edition Electronic business eXtensible Markup Language (ebXML) Part 1: Collaboration-protocol profile and agreement specification (ebCPP) First Edition Electronic business eXtensible Markup Language (ebXML) Part 2: Message service specification (ebMS) First Edition Electronic business eXtensible Markup Language (ebXML) Part 3: Registry information model specification (ebRIM) First Edition Electronic business eXtensible Markup Language (ebXML) Part 4: Registry services specification (ebRS) First Edition Electronic Business Extensible Markup Language (ebXML) Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS) First Edition Road vehicles Measurement of driver visual behaviour with respect to transport information and control systems Part 2: Equipment and procedures First Edition Tractors and Self-Propelled Machinery for Agriculture and Forestry - Operator Controls - Actuating Forces, Displacement, Location and Method of Operation First Edition Powered Lawn, Garden and Horticultural Equipment - Operator Controls - Guidance on Actuating Forces, Displacement, Location and Methods of Operation First Edition Stainless Steels - Chemical Composition First Edition Geometrical Product Specifications (GPS) Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Part 3: Use of calibrated workpieces or standards First Edition Cardiovascular Implants - Endovascular Prostheses First Edition Transport Information and Control Systems - Traffic Impediment Warning Systems (TIWS) - System Requirements First Ediiton Acoustics - Assessment of Noise Annoyance by Means of Social and Socio-Acoustic Surveys First Edition Mechanical vibration and shock Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system First Edition Cranes - List of Equivalent Terms Appareils De Levage A Charge Suspendue - Liste De Termes Equivalents First Edition Measurement of Liquid Velocity in Open Channels - Design, Selection and Use of Electromagnetic Current Meters First Edition Hydrometric Determinations - Liquid Flow in Open Channels and Partly Filled Pipes - Guidelines for the Application of Doppler-Based Flow Measurements First Edition Road vehicles ù Test procedures ù Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags First Edition Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity First Edition Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity TS 15876-7 First Edition Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the TS 15877-7 assessment of conformity First Edition TS 15883-5 Washer-disinfectors Part 5: Test soils and methods for demonstrating cleaning efficacy First Edition Industrial automation systems and integration ù Integration of life-cycle data for process plants including oil and gas production TS 15926-4 facilities ù Part 4: Initial reference data First Edition TS 16058 Health informatics Interoperability of telelearning systems First Edition TS 16071 Ergonomics of Human-System Interaction - Guidance on Accessibility for Human-Computer Interfaces First Edition TS 16111 Transportable gas storage devices Hydrogen absorbed in reversible metal hydride First Edition TS 16332 Diesel engines Fuel filters Method for evaluating fuel/water separation efficiency First Edition TS 16431 Hydraulic Fluid Power - Assembled Systems - Verification of Cleanliness First Edition TS 16489 CORR 1 Water quality ù Guidance for establishing the equivalency of results TECHNICAL CORRIGENDUM 1 First Edition TS 16489 Water quality ù Guidance for establishing the equivalency of results First Edition TS 16553 Road vehicles Data cables Test methods and requirements First Edition TS 16610-1 Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts First Edition TS 16610-20 Geometrical product specifications (GPS) Filtration Part 20: Linear profile filters: Basic concepts First Edition TS 16610-22 Geometrical product specifications (GPS) Filtration Part 22: Linear profile filters: Spline filters First Edition TS 16610-29 Geometrical product specifications (GPS) Filtration Part 29: Linear profile filters: Spline wavelets First Edition TS 16610-40 Geometrical product specifications (GPS) Filtration Part 40: Morphological profile filters: Basic concepts First Edition Geometrical product specifications (GPS) Filtration Part 41: Morphological profile filters: Disk and horizontal line-segment filters First TS 16610-41 Edition TS 15875-7

ISO ISO ISO

TS 16610-49 TS 16628 TS 16630

ISO ISO ISO

TS 16649-3 TS 16732 TS 16733

ISO ISO

TS 16799 TS 16922

Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques First Edition Tracheobronchial tubes Recommendations for size designation and labelling First Edition Metallic Materials - Method of Hole Expanding Test First Edition Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of Ô-glucuronidase-positive Escherichia coli Part 3: Most probable number technique using 5-bromo-4-chloro-3-indolyl-Ô-Dglucuronide First Edition Fire safety engineering - Guidance on fire risk assessment First Edition Fire safety engineering Selection of design fire scenarios and design fires First Edition Rolling Bearings - Dynamic Load Ratings and Rating Life - Discontinuities in the Calculating of Basic Dynamic Load Ratings First Edition Natural Gas - Guidelines for Odorizing Gases First Edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

Quality management systems Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations Second Edition; Corrected and Reprinted: 12/15/2003 Road vehicles Ergonomic aspects of transport information and control systems (TICS) Procedures for determining priority of onTS 16951 board messages presented to drivers First Edition TS 16952-1 Technical product documentation Reference designation system Part 1: General application rules First Edition TS 17090-1 Health Informatics - Public Key Infrastructure - Part 1: Framework and Overview First Edition TS 17090-2 Health Informatics - Public Key Infrastructure - Part 2: Certificate Profile First Edition TS 17090-3 Health Informatics - Public Key Infrastructure - Part 3: Policy Management of Certification Authority First Edition TS 17104 Rotary tool for threaded fasteners Hydraulic impulse tools Performance test method First Edition TS 17117 Health Informatics - Controlled Health Terminology - Structure and High-Level Indicators First Edition TS 17226 Leather Chemical tests Determination of formaldehyde content First edition; IULTCS/IUC 19 TS 17234 Leather Chemical tests Determination of certain azo colourants in dyed leathers First edition; IULTCS/IUC 20 Intelligent transport systems ù Automatic vehicle and equipment identification ù Intermodal goods transport architecture and TS 17261 CORR 1 terminology TECHNICAL CORRIGENDUM 1 First Edition Intelligent transport systems ù Automatic vehicle and equipment identification ù Intermodal goods transport architecture and TS 17261 terminology First edition TS 17262 Automatic vehicle and equipment identification Intermodal goods transport Numbering and data structures First Edition TS 17263 Automatic vehicle and equipment identification Intermodal goods transport System parameters First Edition TS 17369 Statistical data and metadata exchange (SDMX) First edition TS 17431 Fire tests Reduced-scale model box test First Edition TS 17450-1 CORR Geometrical product specifications (GPS) ù General concepts ù Part 1: Model for geometrical specification and verification 1 TECHNICAL CORRIGENDUM 1 First Edition TS 16949

ISO

TS 17450-1

ISO ISO

TS 17450-2 TS 17477

ISO

TS 17573

ISO ISO ISO ISO

TS 17574 TS 17576 TS 17764-1 TS 17764-2

ISO

TS 17845

Geometrical product specifications (GPS) General concepts Part 1: Model for geometrical specification and verification First Edition Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties First Edition Acceptance Tests for CO2-Laser Beam Machines for Welding and Cutting Using 2D Moving Optics Type First Edition Road Transport and Traffic Telematics Electronic Fee Collection (EFC) Systems architecture for vehicle related transport services First Edition Road transport and traffic telematics Electronic fee collection (EFC) Guidelines for EFC security protection profiles First Edition Dentistry Corrosion tests for amalgam First Edition Animal feeding stuffs Determination of the content of fatty acids Part 1: Preparation of methyl esters First Edition Animal Feeding Stuffs - Determination of the Content of Fatty Acids - Part 2: Gas Chromatographic Method First Edition Welding and allied processes Designation system for imperfections Soudage et techniques connexes Syst×mes de dÚsignation des dÚfauts First Edition

ISO

TS 17892-1

Geotechnical investigation and testing Laboratory testing of soil Part 1: Determination of water content First Edition

ISO

TS 17892-2

ISO

TS 17892-3

Geotechnical investigation and testing Laboratory testing of soil Part 2: Determination of density of fine-grained soil First Edition Geotechnical investigation and testing Laboratory testing of soil Part 3: Determination of particle density Pycnometer method First Edition

ISO ISO ISO

TS 17892-4 TS 17892-5 TS 17892-6

ISO ISO

TS 17892-7 TS 17892-8

ISO ISO

TS 17892-9 TS 17892-10

ISO ISO

TS 17892-11 TS 17892-12

ISO ISO

TS 17996 TS 18173

ISO

TS 18226

ISO

TS 18234-1

ISO

TS 18234-2

ISO

TS 18234-3

ISO

TS 18234-4

ISO

TS 18234-5

ISO ISO

TS 18234-6 TS 18308

Geotechnical investigation and testing Geotechnical investigation and testing Geotechnical investigation and testing Geotechnical investigation and testing Edition Geotechnical investigation and testing Geotechnical investigation and testing soil First Edition Geotechnical investigation and testing Geotechnical investigation and testing First Edition Geotechnical investigation and testing

Laboratory testing of soil Laboratory testing of soil Laboratory testing of soil Laboratory testing of soil

Part 4: Determination of particle size distribution First Edition Part 5: Incremental loading oedometer test First Edition Part 6: Fall cone test First Edition Part 7: Unconfined compression test on fine-grained soil First

Laboratory testing of soil Part 8: Unconsolidated undrained triaxial test First Edition Laboratory testing of soil Part 9: Consolidated triaxial compression tests on water-saturated Laboratory testing of soil Part 10: Direct shear tests First Edition Laboratory testing of soil Part 11: Determination of permeability by constant and falling head Laboratory testing of soil Part 12: Determination of Atterberg limits First Edition

Cheese Determination of rheological properties by uniaxial compression at constant displacement rate First Edition; IDF/RM 205 Non-destructive testing General terms and definitions Essais non destructifs Termes gÚnÚraux et dÚfinitions First Edition Plastics pipes and fittings Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) First Edition Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 1: Introduction, numbering and versions First Edition Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 2: Syntax, Semantics and Framing Structure (SSF) First Edition Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 3: Service and Network Information (SNI) application First Edition Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 4: Road Traffic Message (RTM) application First Edition Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 5: Public Transport Information (PTI) application First Edition Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 6: Location referencing applications First Edition Health informatics Requirements for an electronic health record architecture First Edition

ISO

TS 18835

ISO

TS 18876-1

ISO

TS 18876-2

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

TS 19036 TS 19103 TS 19127 TS 19138 TS 19139 TS 19218 TS 19700 TS 19979 TS 20022-3 TS 20022-4 TS 20022-5

ISO ISO ISO ISO

TS 20119 TS 20225 TS 20281 TS 20282-2

ISO

TS 20452

ISO

TS 20625

ISO

TS 20646-1

ISO

TS 20825

ISO

TS 20836

ISO ISO

TS 20885 TS 20993

Inhalational anaesthesia systems Draw-over vaporizers and associated equipment First Edition Industrial automation systems and integration Integration of industrial data for exchange, access and sharing Part 1: Architecture overview and description First Edition Industrial automation systems and integration Integration of industrial data for exchange, access and sharing Part 2: Integration and mapping methodology First Edition Microbiology of food and animal feeding stuffs Guidelines for the estimation of measurement uncertainty for quantitative determinations First Edition Geographic information Conceptual schema language First Edition Geographic information Geodetic codes and parameters First Edition Geographic information Data quality measures First Edition Geographic information ù Metadata ù XML schema implementation First Edition Medical devices Coding structure for adverse event type and cause First Edition Controlled equivalence ratio method for the determination of hazardous components of fire effluents First Edition Ophthalmic optics Contact lenses Hygienic management of multipatient use trial contact lenses First Edition Financial services UNIversal Financial Industry message scheme Part 3: ISO 20022 modelling guidelines First Edition Financial services UNIversal Financial Industry message scheme Part 4: ISO 20022 XML design rules First Edition Financial services UNIversal Financial Industry message scheme Part 5: ISO 20022 reverse engineering First Edition Road Vehicles - Test Method for the Quantification of On-Centre Handling - Determination of Dispersion Metrics for Straight-Line Driving First Edition Global Medical Device Nomenclature for the Purpose of Regulatory Data Exchange First Edition Water quality Guidance on statistical interpretation of ecotoxicity data First edition Ease of operation of everyday products Part 2: Test method for walk-up-and-use products First Edition Requirements and Logical Data Model for a Physical Storage Format (PSF) and an Application Program Interface (API) and Logical Data Organization for PSF used in Intelligent Transport Systems (ITS) Database Technology First Edition Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) Rules for Generation of XML Scheme Files (XSD) on the Basis of EDI(FACT) Implementation Guidelines First Edition Ergonomic procedures for the improvement of local muscular workloads Part 1: Guidelines for reducing local muscular workloads First Edition Road Vehicles - Drawbar Couplings, Drawbar Eyes, Fifth Wheel Kingpins, Hook Couplins and Toroidal Eyes - Wear Limits for in-use Mecahanical Couplings First Edition Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens Performance testing for thermal cyclers First Edition Gaseous media fire-extinguishing systems Area coverage fire test procedure Engineered and preengineered extinguishing units First Edition Biological evaluation of medical devices Guidance on a riskmanagement process First Edition

ISO

TS 21091

ISO ISO

TS 21098 TS 21108

ISO

TS 21268-1

ISO

TS 21268-2

ISO ISO ISO ISO ISO

TS 21268-3 TS 21432 TS 21609 TS 21667 TS 21747

ISO ISO

TS 21748 TS 21749

ISO

TS 21872-1

ISO

TS 21872-2

ISO

TS 21929-1

ISO

TS 21931-1

ISO ISO

TS 22003 TS 22004

ISO

TS 22028-2

ISO ISO

TS 22028-3 TS 22269

ISO

TS 22475-2

Health informatics - Directory services for security, communications and identification of professionals and patients First Edition Foodstuffs Nucleic acid based methods of analysis of genetically modified organisms and derived products Information to be supplied and procedure for the addition of methods to ISO 21569, ISO 21570 or ISO 21571 First Edition Hand-held power tools Impulse wrenches Dimensions and tolerances of interface to power socket First edition Soil quality ù Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials ù Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter First Edition Soil quality ù Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter First Edition Soil quality ù Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 3: Up-flow percolation test First Edition Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction First Edition Road vehicles EMC guidelines for installation of aftermarket radio frequency transmitting equipment First Edition Health informatics Health indicators conceptual framework First Edition Statistical methods Process performance and capability statistics for measured quality characteristics First Edition Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation First Edition Measurement and uncertainty for metrological applications Repeated measurements and nested experiments First Edition Microbiology of food and animal feeding stuffs ù Horizontal method for the detection of potentially enteropathogenic Vibrio spp. ù Part 1: Detection of Vibrio parahaemolyticus and Vibrio cholerae First Edition Microbiology of food and animal feeding stuffs ù Horizontal method for the detection of potentially enteropathogenic Vibrio spp. ù Part 2: Detection of species other than Vibrio parahaemolyticus and Vibrio cholerae First Edition Sustainability in building construction Sustainability indicators Part 1: Framework for the development of indicators for buildings First Edition Sustainability in building construction Framework for methods of assessment for environmental performance of construction works Part 1: Buildings First Edition Food safety management systems ù Requirements for bodies providing audit and certification of food safety management systems First Edition Food safety management systems Guidance on the application of ISO 22000:2005 First Edition Photography and graphic technology Extended colour encodings for digital image storage, manipulation and interchange Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB) First Edition Photography and graphic technology Extended colour encodings for digital image storage, manipulation and interchange Part 3: Reference input medium metric RGB colour image encoding (RIMM RGB) First Edition Reaction to fire tests Fire growth Full-scale test for stairs and stair coverings First Edition Geotechnical investigation and testing Sampling methods and groundwater measurements Part 2: Qualification criteria for enterprises and personnel First edition

ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO

TS 22475-3 TS 22476-10 TS 22476-11 TS 22559-1 TS 22595-1 TS 22600-1 TS 22600-2 TS 22911 TS 22964 23081-1

ISO

TS 23081-2

ISO

TS 23165

ISO ISO ISO

TS 23810 TS 24154 TS 24155

ISO

TS 24348

ISO

TS 24530-1

ISO

TS 24530-2

ISO

TS 24530-3

ISO

TS 24530-4

ISO ISO ISO ISO ISO ISO

TS 24817 TS 25238 TS 25377 TS 26844 TS 28923 TS 28924

Geotechnical investigation and testing ù Sampling methods and groundwater measurements ù Part 3: Conformity assessment of enterprises and personnel by third party First Edition Geotechnical investigation and testing Field testing Part 10: Weight sounding test First edition Geotechnical investigation and testing Field testing Part 11: Flat dilatometer test First edition Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs) First Edition Dentistry Plant area equipment Part 1: Suction systems First Edition Health informatics Privilege management and access control Part 1: Overview and policy management First Edition Health informatics Privilege management and access control Part 2: Formal models First Edition Dentistry Preclinical evaluation of dental implant systems Animal test methods First Edition Milk and milk products Detection of Enterobacter sakazakii First Edition Information and documentation Records management processes Metadata for records Part 1: Principles First Edition Information and documentation ù Records management processes ù Metadata for records ù Part 2: Conceptual and implementation issues First Edition Geometrical product specifications (GPS) Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty First Edition Cardiovascular implants and artificial organs Checklist for preoperative extracorporeal circulation equipment setup First Edition Hydrometry Measuring river velocity and discharge with acoustic Doppler profilers First Edition Hydrometry ù Hydrometric data transmission systems ù Specification of system requirements First Edition Ophthalmic optics ù Spectacle frames ù Method for the simulation of wear and detection of nickel release from metal and combination spectacle frames Second Edition Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 1: Introduction, common data types and tpegML First Edition Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 2: tpeg-locML First Edition Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 3: tpeg-rtmML First Edition Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 4: tpeg-ptiML First Edition Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection First Edition Health informatics ù Classification of safety risks from health software First Edition Hydrometric uncertainty guidance (HUG) First Edition Milk and milk products Determination of antimicrobial residues Tube diffusion test First Edition; IDF/RM 215 Agricultural machinery ù Guards for moving parts of power transmission ù Guard opening with tool First Edition Agricultural machinery ù Guards for moving parts of power transmission ù Guard opening without tool First Edition

ISO ISO ISO ISO ISO ISO

TS 29001 TTA 1 TTA 2 TTA 3 TTA 4 TTA 5

Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations First Edition/Cobranded with API SPEC Q1 Advanced Technical Ceramics - Unified Classification System First Edition Tensile Tests for Discontinuously Reinforced Metal Matrix Composites at Ambient Temperatures First Edition Polycrystalline Materials - Determination of Residual Stresses by Neutron Diffraction First Edition Measurement of thermal conductivity of thin films on silicon substrates First Edition Code of practice for creep/fatigue testing of cracked components First Edition

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF