Oniplast DIN 8062

DIN 8062 DIMENSIONAL CHART OF uPVC PIPES AS PER DIN 8062  All dimensions in mm Wall Thickness of Pipes of Series of 2 3 4

Nominal Mean Outside Diameter Diameter  1 5 6 (Nominal Min Max Min Max Min Max Min Max Min Max Min Max Min Max Size) 20 20 20.2 1.5 1.9 2.3 2.8 25 25 25.2 1.5 1.9 1.9 2.3 2.8 3.3 32 32 32.2 1.8 2.2 2.4 2.9 3.6 4.2 40 40 40.2 1.8 2.2 1.9 2.3 3 3.5 4.5 5.2 50 50 50.2 1.8 2.2 2.4 2.9 3.7 4.3 5.6 6.4 63 63 63.2 1.9 2.3 3 3.5 4.7 5.4 7 7.9 75 75 75.3 1.8 2.2 2.2 2.7 3.6 4.2 5.6 6.4 8.4 9.5 90 90 90.3 1.8 2.2 2.7 3.2 4.3 5 6.7 7.6 10 11.2 110 110 110.3 1.8 2.2 2.2 2.7 3.2 3.8 5.3 6.1 8.2 9.3 12.3 13.8 125 125 125.3 1.8 2.2 2.5 3 3.7 4.3 6 6.8 9.3 10.5 13.9 15.5 140 140 140.4 1.8 2.2 2.8 3.3 4.1 4.8 6.7 7.6 10.4 11.7 16.6 17.4 160 160 160.4 1.8 2.2 3.2 3.8 4.7 5.4 7.7 8.7 11.9 13.3 17.8 19.8 180 180 180.4 1.8 2.2 3.6 4.2 5.3 6.1 8.6 9.7 13.4 15 20 22.2 200 200 200.4 1.8 2.2 4 4.6 5.9 6.7 9.6 10.8 14.9 16.6 22.3 24.8 225 225 225.5 1.8 2.2 4.5 5.2 6.6 7.5 10.8 12.1 16.7 18 25 27.7 250 250 250.5 2 2.4 4.9 5.6 7.3 8.3 11.9 13.3 18.6 20.7 27.8 30.8 280 280 280.6 2.3 2.8 5.5 6.3 8.2 9.3 13.4 15 20.8 23.1 315 315 315.6 2.5 3 6.2 7.1 9.2 10.4 15 16.7 23.4 26 355 355 355.7 2.9 3.4 7 7.9 10.4 11.7 16.9 18.8 26.3 29.2 400 400 400.7 3.2 3.8 7.9 8.9 11.7 13.1 19.1 21.3 29.7 32.9 450 450 450.8 3.6 4.2 8.9 10 13.2 14.8 21.5 23.9 500 500 500.9 4 4.6 9.8 11 14.6 16.3 23.9 26.5 560 560 561 4.5 5.2 11 12.3 16.4 18.3 26.7 29.6 630 630 631.1 5 5.7 12.4 13.9 18.4 20.5 30 33.2 710 710 711.2 5.7 6.5 14 15.6 20.7 23 800 800 801.3 6.4 7.3 15.7 17.5 23.3 25.9 900 900 901.5 7.2 8.2 17.7 19.7 26.3 29.2 1000 1000 1001.6 8 9 19.7 21.9 29.2 32.4 Recommended Working Pressure in BAR for conveyance of water and harmless fluids to which Rigid PVC is resistant (to refer DIN 2403, March 1965 issue, Section 7.2 & DIN 16929) 20 4 6 10 16 Temperature up to To refer Note 1 To refer Note 2 40 2.5 4 6 10 0C below below 60 1 2.5 1) Pipe Series 1 is stipulated as special series for construction of Ventilation Pipes 2) Pipe Series 6 is stipulated as special series for construction of Pipeline and Apparatus in chemical industry. This pipes at least withstand Note: the pressure Series 5.  They have a bigger wall thicknesses than Pipes of Series 5 witth a view to suitability for welding and plastic foaming. 3) Pipe Series 2, 3, 4 & 5 are suiotable for conveyance foe Water and are harmless (to refer DIN 2403, March 1965 issue, Section 7.2) Fluids to which rigid PVC is resistant (to refer DIN 16929)