Reminder: • Wire numbers are identified on ALL Olympian generator set drawings. • Terminal numbers ARE NOT identified on all Olympian generator set drawings.
High Coolant Temperature Switch (contact closes on high coolant temp.)
Oil Pressure Sender
Coolant Temperature Sender
Low Oil Pressure Switch (contact closes on low oil pressure) Understanding Olympian Generator Set Schematics
LEGF1943
Component Identification Engine Gauges
Engine Temperature Gauge
Oil Pressure Gauge
Understanding Olympian Generator Set Schematics
LEGF1943
Component Identification Engine Meters
Battery Voltmeter
Hours Run Meter
Understanding Olympian Generator Set Schematics
LEGF1943
Component Identification Run Switch
Run/Stop/Auto Switch
Pole 2
Pole 1 Understanding Olympian Generator Set Schematics
LEGF1943
Component Identification Wiring Looms
AC Loom Connection to Control Panel (Pin 11) DC Loom Connection to Control Panel (Pin 7)
Understanding Olympian Generator Set Schematics
LEGF1943
Grid References
Understanding Olympian Generator Set Schematics
LEGF1943
Grid Reference Identifying the coordinates for the wire destination.
Wires Continue at Grid Reference D04
Understanding Olympian Generator Set Schematics
LEGF1943
Grid References Locating the destination based on the coordinates.
Understanding Olympian Generator Set Schematics
LEGF1943
Voltage Changes
Understanding Olympian Generator Set Schematics
LEGF1943
Voltage Changes
Link Sets the Voltage Sensing Level to Control Board (If the link is in the wrong position, the control board may be permanently damaged) Understanding Olympian Generator Set Schematics
Thank you for interesting in our services. We are a non-profit group that run this website to share documents. We need your help to maintenance this website.