NSN Command

MML COMMAND 1- ZEEI: BCF= ;:- Tells about no. of calls in each sector at that time 2- ZEEL: BL;- Give information about the no . of blocked TRX in particular BCS 3- ZEOL :< BCF no>; :- Give information about present alarms 4- ZEOH:YYYY-MM-DD:HH-MM-SS:BCF=; :-This command tells about history of alarms on particular date from particular time 5- ZAHO:ET:;- To check alarms on the ETs. 6- ZYMO:ET=; - To check ET link status have any errors or not, also to check the slips on ET. 7- ZDTI:::PCM=; - To interrogate about Lap D signal on particular ET./ To Know on which BCF is this particular ET 8- ZUSI :TCSM ; : To check the status of transcoders 9- ZRBI:ALL; -- SEMIPERMANENT BROADBAND CONNECTIONS HANDLING 10- ZACC< alarm no>; :--To delete a particular alarm 11- ZFWO:BCSU=0&&6:BTS:; - To check all the GB links in the particular BSC. 12- ZERS:BTS=,TRX=:L or U:; - To lock and unlock TRX. 13- ZAHO:TCSM:;- To check the alarms on the transcoders. 14- ZAHO::; - To check the alarms on the BSC. 15- ZESI:; - To check EDAP GPRS mapping. 16- ZEOL::; - To check the current alarms on the site. 17- ZDSB:::PCM=; - To check all the parameters of LAPDs. 18- ZWIP:GSW:; - To check the ET, is in which interface. 19- ZYEF:ET=; - To check whether loop on ET is getting or not. 20- ZEQS:BTS=:L or U; - To lock or unlock BTS.

22- ZEFS:BCF=:L or U; - To lock or unlock BCF. 23- ZERM:BTS=NO,TRX=NO:PREF=N&P;:TO PREFERAD BCCH ON TRX 24- ZESI:ID=ET NO.;TO CHECK E-DAP OF PARTICULAR BTS 25- ZEEI::BCSU; Check cop. Of trx 26- ZUSU:ET,ET NO:C=TOT:FCD;: ET RESTART 27- ZUSU:ET=:; - For resetting ET port. 2 ETs take reset at same time. 28- ZYEC:ET=:NORM,CRC4,OFF; - To change ET mode to CRC4 or DBLF. 29- ZYEI:ET=; - To interrogate about the ET mode. 30- ZUSI:ET:; - To check ET state whether it is blocked or working. 30- ZDTF:TCSM,:; To check ET state whether it is blocked or working. 31- ZUSC:ET= - To change the state of ET to BL, WO, SE. 32- ZERO:BCF=; - To see the all parameters of the BCF. 33- ZEFR::SITE or OMU:; - To give reset to whole site or to the OMU of the site. 34- ZRCI:SEA=3:CGR=1:PRINT=5:; - To check the status of circuits of the transcoders and also to see the kick no.. 35- ZECP – To see the list of the CBCs already created. 36- ZECE – To deactivate the message attached to the BTS 37- ZECD – To remove the message from the list. 38- ZECB:50::4:1:ENG:4::P1=; - To create the new message. 39- ZECS – To attach the message with the particular BTS. 40- ZDTC::; - To change the state of the LAPDs. 41-ZDTC:LAPD NO:AD; FIRST TRX SINGLING DELETED 42- ZDSD: :; - To delete the LAPD.

43-DERD:BTS=N0,TRX=NO; TRX DELETED first trx delited 44- ZUSI:COMP; Checking the working states of the BSC units 45- ZUSI:MB; checking the working states of the BSC units 46- ZUSI:CLS; checking the working states of the BSC units 47- ZUSI:TCSM; checking the working states of the BSC units 48- ZUSI:ET; checking the working states of the BSC units 49- ZUSI:OMU; checking the working states of the BSC units 50- ZNLI;-SIGNALLING LINK STATE CHANGE 51- ZNLC:,ACT; 52- ZCEL:CGR=1; - Check the route circuit state. 53- ZEEL:BL; - check the block TRX of whole PLMN. 54- ZEEI::BCSU; NUMBER OF CREATED TRXS, LINKS AND REAL TCHS UNDER BCSUS 55- ZQNI;: CHEK C.NO. IN BSC 56- ZQCI; :CHECK BSC X.25 LOCATION 57- ZNLI; :CHECK SINGALLING STAUTS 58- ZOLT;: CHECK SINGALLING LINK LOAD 59- ZQLI;: CHECK INTERROGATING LINKAGE DATA FOR X.25(OMU) 60- ZQSI;: INTERROGATING PHYSICAL CHANNEL STATE X.25(OMU) 61- ZAHO::NR=2725&2992&2993&2952&2955; CHECK BSC ALARM HISTORY 62- ZAHO::NR=2241&2950&2915&2477&2478&3265&2720; CHECK BSC ALARM HISTORY 63- ZAHO:TCSM;TRONSCODER ALARM 64- ZWQO:CR; CHECK BSC BACKUP 65- ZEOL::NR=7706; OMU LINK DOWN

66- ZEOL::NR=7767; SITE DOWN 67- ZQRI;: BSC CHECK IP. ADDRESS. 68- ZEQO:BTS=23:GPRS;:TO CHECK GPRS ENABLE OR DISABLE 69- ZWAT;:BSC CREATED ALARM 70- ZAHP::NR=4000:2009-2-6,20-00-00:;HISTORY ALARM OF BSC 71- ZAHP::NR=ALARM NO.;ON DAY ALARM HISTROY. 72- ZWTI:U:TCSM;TRANSCODER LOCATION DATA BASE 73- ZAHO:TCSM; TRANSCODER ALARM HISTORY 74- ZNEL; TRANSCODER LINK HISTORY 75- ZWAT; Created bsc allarm 76- ZEQV:BTS=30:GENA=Y;GPRS BTS IN ENEBEL. 77- ZWUP:286; CHECK PCM STAUTES (ET TRAU & SITES) 78- ZDRI; 79- ZFWO:BCSU=0&&6::; PRIMARY RATE ACCESS D-CHANNEL STATE MANAGEMENT COMMAND 80- ZAHO::NR=2632; CHECK LOADING PROGRAM VERSION 81- ZDSE:trxsig:BSCU,x:0,x:16,xx-xx,xx; Create TRXSIG 82- ZDSE::BCSU,:,:,,; Create TRXSIG 83- ZQUS: Talks to FXC card Remote Loging Session 84- ZUBS:BTS=bts,TRX=trx; TRX Run testings 85- ZEQO:ALL; BTS Identification Parameters 86-ZEOL::NR=8268; LICENCE WILL EXPIRE IN THE NEAR FUTURE LICENCE FOR FEATURE IS NOT AVAILABLE