nscpw62

September 25, 2017 | Author: A Ali Khan | Category: Electrical Wiring, Computer Monitor, Secure Digital, Television, Traffic Collision
Share Embed Donate


Short Description

nscp-w62...

Description

Page 1

NSCP-W62 Navigation & Audio book CRA4803-A Introduction Basic operation Basic navigation operation Search Root Registration and editing operation Use of various types of information Setting of navigation Audio Basics It wants to receive a broadcast Use music disk Use the SD card Use the Bluetooth Audio Use the AUX Setting Audio Use the camera function Other operations Appendix Page 2

Two CRA4803-A Precaution (Please be sure to observe in order to Safety) In order to prevent damage to you or harm or property to other people, and explain that you get sure to observe It is doing. Ignore the display contents ■, the degree of danger and damage to exert upon the wrong use pieces divided in the next display It is, are described. Caveat It is a "content a person is assumed could result in death or serious injury." Note The occurrence of only the contents and property damage slightly injured possibility is assumed "human assumption

The contents "to be. ■ the type of failure to observe the precautions are classified in the following picture display, are described. Note (including a warning) The contents that must be. The contents of the Force where I am be sure. The contents of the prohibited (doing it should not be). MN-001-002 Connection and mounting Caveat Ban This machine is DC12V⊖ grounded vehicles only Please do not use in 24V vehicles. Fire and late It becomes the cause of the disabled. In place to interfere with the operation of the air bag Is not an absolute to the mounting wiring If you are installing the air bag equipped car, the vehicle We will continue to check the notes on the work of the manufacturer Please. Air bag malfunctions, of fatal accident It may cause. Place to prevent the forward visibility and driving operation Place, in a location that is hazardous to passenger I am not attached to the absolute It becomes the cause of traffic accidents and injuries. Turn off the coating of the power cord, other Do not take the power of equipment If the current capacity of the power cord is over, fire Disaster or electric shock, it may cause malfunction. The mounting safety parts (stearic Ring, brake, volume of the tank, etc.) Belt and nut are not used to the absolute If you use these, braking inability or fire, traffic The cause of the accident. Caveat Ban The antenna, in order to meet safety standards Na You can paste the stomach place, with re-paste Paste in the only and general-purpose of double-sided tape Not or Peeling poor visibility and the antenna is, the cause of the accident It becomes. Forcing

Mounting and wiring, change the mounting location, cheap To ask your dealer for all The mounting and wiring and removal, expertise and experience Is required. incorrect installation and wiring, remove If you have teeth, if you cause a serious hindrance to the car I have. In addition, the mounting and by yourself Wiring can cause injury. Work before I remove the ⊖ terminal of the battery The short of ⊕ and ⊖ route, electric shock or injury It may cause. Before work, pipes, tanks, electrical It will confirm the position of such wiring If you are installing to a hole in the vehicle body, pipe Do not interfere, contact with and Louis tank electrical wiring Please note strangely. In addition, the processing of the service Please perform the treatment of bi-stop and flood prevention. Page 3

Three Introduction CRA4803-A Caveat Forcing Be sure to use the supplied parts, surely Fix If you use other than the supplied parts, equipment internal parts And damage the goods to the outside can not be securely fastened It is to become a hindrance of operation, and cause of the accident or injury Will. You want to connect and installed in accordance with instructions When you make a connection, attached to not follow the instructions, It may cause a fire or failure. The coating is not part of the code tape Insulation, etc. By short-circuiting, fire or electric shock, and the cause of failure Will. Body and threaded portion, a seat rail Do not sandwiched between the code which the moving parts The wiring will Iyo By disconnection or short circuit, fire or electric shock, of failure It may cause.

If cords and interfere with driving operation Fixed so as not Steering and selector lever, brake pedal When wrapped around such as Le, it becomes the cause of the accident. After installing the wiring is complete, power Make I see goods to work restored successfully Be sure When used in a state that does not work properly, and Ya fire Electric shock, it will cause a traffic accident. Small parts such as screws, of infants Store out of the reach of hand If swallowed, immediately phase to doctor Please be Dan. Note Ban Hot air of direct sunlight or heater directly it is not attached to the location where you hit The internal temperature will rise, and cause a fire or failure There is a thing. Preparative unstable the antenna and monitor It is not attached to a time It may cause such as dropping. Do not block the vents and heat dissipation plate Internal heat build up to, and cause a fire or failure There is a thing. Cords are not cut in the middle of absolutely And if the cords that with fuses Some reason, no longer work protection circuit, fire It may cause. Note Ban Wiring of the cords, the body of the high-temperature portion It is not brought into contact with the It may cause a fire or electric shock. Products shipped with power leads, back It is not directly connected to Terry It may cause a fire or electric shock. Current is insufficient, the power directly from the battery If you take, you will use a dedicated wiring kit Please. It is not a branch wiring

Cable is heated, it is a fire and electrical shock hazard There is Rukoto. place and water and condensation that rain blows, dust Ri, in the place where such as soot is mixed It is not installed Smoke or fire, it may cause a malfunction. Forcing So that code does not touch the metal parts Wire A damaged power cord is in contact with metal parts, fire Or electric shock, it may cause a malfunction. Antenna and camera before and after the car width and car It is mounted in a location that does not protrude from the In contact with, such as a pedestrian, and the cause of the unexpected accident It may become. Write pull the antenna code or the like in the car No case, be aware of the infiltration of rainwater If rainwater is entering the car, the cause of fire or electric shock It may become. How to use Caveat Ban Driver not operate while driving It might cause a traffic accident becomes a front carelessness Vinegar. Is operation after stop in safe place Please be. The driver does not watch the image while driving It may cause a traffic accident becomes a front carelessness. It is a retreat operation and screen to increase the speed Do not retreat operation of while watching the only Video back camera uses a wide-angle lens It has. Since the actual distance and the feeling is different, There is a possibility that the hit to the people and things. In addition,必 Not be retracted while confirms safe visual Please be. People who have become blind spot of the camera There is a possibility that the hit on and things, an unexpected accident original It becomes the cause. Page 4

Four CRA4803-A

Caveat Ban Hand or fingers in the media insertion slot, the foreign matter Not put Injury or electric shock, it may cause a fire or failure. It is not wetted with liquid It may cause smoke or fire or electric shock. In particular Please note that in families with children. Screen is not displayed, no sound, voice Abnormal and failures, such as it is broken, distorted Do not use the state unexpected accident, fire, or may cause electric shock. NO contact If thunder is heard, antenna code Do not touch the soil and the machine There is a risk of electric shock from lightning. Disassemble Do not disassemble or modify Traffic accidents and fire, it may cause electric shock. Forcing Run in accordance with the actual traffic regulations Only to route guidance by the navigation Therefore, when traveling, it is contrary to the actual traffic regulations There is a case, it will cause a traffic accident. When the driver watch TV and video Huang, parking blanking be sure to stop Bet the rake TV and video, while driving for safety display It will not be. When replacing the fuse, be sure Provision capacity fuses (amps) To use If you use a fuse that exceeds regulated capacity, fire It becomes the cause of the disaster and failure. Note Ban This machine is not used except for automotive Smoke or fire, it may cause electric shock or injury There. Do not touch the heat radiating portion of the amplifier It may cause burns.

Forcing Degree volume, the outside of the sound can be heard It used to in When driving in a state in which the outside of the sound is not heard, exchange It may cause accidents through. Note Injury of finger Note The hand at the time of monitoring of the storage and angle adjustment It will be careful not to pinch your finger or It may cause injury. Abnormal time of inquiry Caveat Forcing In the unlikely event abnormality occurs, immediately Discontinue use, Sir always reseller Consult the screw consultation Continuing to use the unexpected accident or fire-sensitive It becomes the cause of the power. Page 5

Five Introduction CRA4803-A Introduction Safety Precautions ................................. 2 Book How to read .................................. 11 How to book conventions ......................... 11 Please read .............................. 12 Attention to customers ............................. 12 ......................... 12 for operation of the machine Of 3D hybrid sensor For automatic learning ......................... 12 In order to prevent the battery up of the car ... 12 If you remove the battery terminal About reconfigured ............................. 12 About SD Memory Card ............. 13 For LCD screen ............................. 13 For map data ......................... 13 For customers of the registered data ... 13 Copyright ................................................ . 14

For security functions .............. 14 Other ................................................. 14 QUICK SETUP ............................ 15 Perform QUICK SETUP .................... 15 ............ 15 to start the QUICK SETUP Preparation .............. 19 for watching TV Basic operation Part Names and Functions .................. 20 Navigation body (State closed the screen monitor) ....... 20 Navigation body (State opened the screen monitor) ....... 20 Steering switch (Vehicles only) .................................. 21 You are here screen touch key .................. 21 Basic Operations .......................................... 22 To operate the touch panel .................. 22 Operating in button ............................. 23 Screen switching how ......................... 23 ...... 24 to adjust the angle of the screen monitor To adjust the image quality ................................. 25 Operation of the list screen ............................. 25 Disk out of ......................... 26 And out of the SD card ....................... 28 Character input operation .............................. 30 .......... 30 to switch the method of character input Flow of character input operation ...................... 30 To switch the type of character .................. 30 Enter the character ................................. 31 No conversion, conversion is carried out ........................... 33 To end the character input ......................... 33 Symbol can be kana-to-kanji conversion .................. 34 Table of contents Page 6

Six Table of contents CRA4803-A Basic navigation operation Navigation of the basic operation ........... 35 Operation of the navigation menu ......................... 35

Operation of the shortcut menu ...... 38 Map screen of the operation .............................. 39 To display the current position screen ...................... 39 To move the map (scroll) .............. 40 To change the scale of the map .................. 41 To change the display method of map .................. 41 To change the orientation of the map ......................... 42 The passage display 100m scale while The ON / OFF to ................................ 43 The ON enlarged display of character / OFF to ..... 44 Register the scale ......................... 44 To the display settings of the logo mark ............ 44 Show coordinate ................................. 46 About side map ...................... 46 Safety Information ...... 48 About e start guide ................... 48 About screen that is displayed while driving .... 49 For highway mode .............. 50 To return to the home ...................................... 54 To register the home ................................. 54 To route search to your home .................. 54 Search Location Find ...................................... 55 Search by map ......................................... 55 Search by name ......................................... 55 Search by Address ......................................... 56 Search by genre ................................. 57 Find surrounding facilities ................................. 57 Search by telephone number ................................. 59 Find from the registration areas ................................. 59 Find from the search history ............................. 60 Search by map code ...................... 60 Find an easy destination search .............. 61 View detailed information .............................. 62 Root .......................... 63 to explore the root Route guidance start screen How to read .......... 64 ...... 65 to confirm the root profile ............................. 65 to choose the other route Show route map ...................... 66 ...................... 66 for a detailed route setting

For route search function .................. 69 Root induction and Information .......................... 70 You are here screen during route guidance .............. 70 The induction by voice-guidance ...................... 73 Operation during route guidance and function ........... 76 When you deviate from the route Automatically re-explore the route ...... 76 The new route according to the situation The proposed ......................................... 76 And to guide the traffic jam information on the route ... 77 Route information of operation ... 77 .......................... 78 to edit the route Check the root profile ...... 78 And to re-explore the route by changing the conditions ... 78 To clear the route ............................. 79 ......................... 79 to postpone a stop-off place It is confirmed by demonstration run ......................... 79 .......................... 80 to clear the route Page 7

Seven Table of contents Introduction CRA4803-A Registration and editing operation To register the location .............................. 81 To register the location ................................. 81 .......................... 83 to edit the registered location .......... 83 to edit the contents registered in the registration area To erase the registered location ............................. 84 ............................. 85 to migrate the registered location To edit other data ........... 87 To clear the search history ......................... 87 To erase the learning contents of the root .......... 87 ......................... 88 to erase the traveling locus Use of various types of information ............ 89 to use the FM-VICS information The VICS information ................................... 89 View VICS information on the map ............... 90 And to guide the traffic jam information on the route ... 91 View characters and graphics information of VICS ........ 92

..................................... 93 to select a broadcast station To use the ETC information ..................... 94 ................. 94 to display the ETC usage history ................. 94 to display the ETC registration information To perform the ETC setting ................................ 95 ....... 96 for use of the vehicle maintenance Set the time to replace, such as consumables ... 96 ................................. 97 Advanced Settings Notice confirmation screen ............................. 97 Use of other information ...................... 98 .......... 98 to check the serial number Sensors to see the learning situation .................. 98 ......................... 99 to check the connection status ........ 100 to confirm the data version Setting of navigation ........................... 101 for the function settings Settings of detail .............................. 102 ............... 106 for the Bluetooth setting Bluetooth equipment Precautions ... 106 To perform the Bluetooth settings .............. 106 The volume of the navigation Set to ................................... 111 .............................. 111 to the volume settings To a guide / Phone Speaker setting ... 111 Set the vehicle information ................... 113 Toll classification setting of ............... 113 Setting of parking restriction (model) .................. 113 Setting of parking restriction (vehicle size) .......... 114 ................... 115 for other settings ........... 115 to correct the deviation of the vehicle position ........... 115 to switch the road while driving Setting the Security ............... 116 Show slide frame ................... 119 To return the set to the initial state ................... 119 Page 8

Eight Table of contents CRA4803-A Audio Basics Audio Basic Operations ............... 121

Show AV source screen ............. 121 To switch the AV source ................ 121 ............... 122 for the AV source to OFF ..... 122 to adjust the volume of the audio Video screen clock display setting ................... 123 The reception of the emergency warning broadcasting (EWS) and about to .......................................... 123 And renewable media on this unit File Type .......................... 123 It wants to receive a broadcast Listen to the radio ............................... 124 Receiving a radio broadcast ............... 124 The frequency scale display screen to switch .................................. 124 ............... 125 to choose the type of preset ...................... 125 to switch the band ............... 125 to register the broadcast stations manually Broadcast stations automatic registration .......................... 126 To listen to the traffic information ........................... 127 To receive traffic information ...................... 127 View one-segment broadcasting ................... 128 To receive one-segment broadcasting ............... 128 And switches the presets ... 129 ............... 130 to register the broadcast stations manually To switch the service ................... 130 .......................... 130 to display the program guide To display the program contents ...................... 131 Registered in the automatic radio stations (Channel scan) ................ 131 .......................... 131 to switch subtitles .......................... 131 to switch the voice ........... 132 for the function setting of one-segment Use music disk Listening to music CD ............................ 133 Playback .......................................... 133 Play by selecting from a list ........... 134 Repeat Play .................................. 134 Random play .................................. 134 CD-R / RW the (WMA / MP3) Listen .......................................... 135 Playback .......................................... 135

Play by selecting from a list ........... 136 Repeat Play .................................. 136 Random play .................................. 136 Use the SD card How to SD of operation ..................... 137 Playback .......................................... 137 Play by selecting from a list ........... 138 Repeat Play .................................. 138 Random play .................................. 139 Use the Bluetooth Audio Of Bluetooth Audio How to operate ........................... 140 Registration of Bluetooth Audio equipment ...... 140 Playback .......................................... 140 Play by selecting from a list ........... 142 Repeat Play .................................. 142 Random play .................................. 142 Of Bluetooth Audio equipment For connections .............................. 143 Page 9

Nine Table of contents Introduction CRA4803-A Use the AUX Using the AUX ................................. 144 To listen to the voice of external equipment ................... 144 Setting Audio ........... 145 for a set of audio Fader / balance setting ............ 145 Loudness setting .............................. 146 Equalizer settings .......................... 146 Source level adjuster setting ... 147 Mute setting .......................................... 148 Use the camera function Using the back guide monitor .... 149 The back guide monitor Note point of about .......................... 149 Notes on camera ................... 149 Select the guide way how ................... 150

To the back guide monitor screen Switching ...................................... 151 For range reflected in the screen ............... 151 Parallel parking (Course display mode) ....................... 152 Parallel parking (Parking guide line display mode) ........ 155 To parallel parking (Column guide mode) .................... 157 To parallel parking (Parking guide line display mode) ........ 166 Error between the actual road surface and screen ........... 168 Notes when the three-dimensional object is near ... 169 Setting the column guide of volume ............... 170 Display of the beginning of the tips ...................... 171 Display of the parking guide line ...................... 171 It is displayed during system initialization When it comes .................................. 172 Battery of desorption, or When it was replaced put this unit ........... 172 Using the back monitor ............... 173 Back monitor of the video ................... 174 Error between the actual road surface and screen ........... 176 Other operations Using a mobile phone ........................... 178 ............... 178 to the hands-free phone call Received phone how .............................. 178 Phone Kake-kata .............................. 179 Operation of a call in the menu ................... 181 Edit the mobile phone information ............... 182 ........... 185 to use the Eco-Manager For eco-driving evaluation ................... 185 Eco prize and ................... 186 .............................. 186 to the fuel consumption set Use personalization features ... 187 Show personalized screen ... 187 ...................... 188 Setting the User Using the user switching menu ... 191 Using the smartphone cooperation function ... 193 Using the NaviCon app ................. 193 Using the smart nAVVi Link app ... 194

Of the touch panel ........... 196 to adjust the touch position Page 10

Ten Table of contents CRA4803-A Appendix Handling Precautions ................... 197 Correct use of the LCD screen how ........... 197 Correct use of a disk-type ........... 197 Correct use of SD card-type ......... 198 Notices radio ...................... 199 For disk ....................... 200 Type of disc that can be played ........... 200 The configuration of the disk ............... 200 WMA / MP3 / AAC / About WAV files ............ 201 Folders and WMA / MP3 / AAC / About WAV files .............. 201 The WMA? .................................... 201 And MP3? .................................... 202 The AAC? ..................................... 203 And WAV? .................................... 203 Navigation mechanisms ........... 204 How You are here can be seen ................... 204 Mechanism for increasing the positioning accuracy ... 204 For error is .................................. 205 Failure kana? If you think ............... 207 Common items .......................................... 207 Navigation .............................. 207 Audio ...................................... 208 ETC ................................................. 212 For reset ......................... 213 About body reset ................... 213 About sensor reset ........... 213 VICS information pay broadcasting Service Agreement ................... 214 Other information ............................... 216 In Search For database ................ 216

Note about the root matters ............... 216 Notes on VICS information matters ......... 218 City map (detailed city map) Recording area .................................. 218 From the Hanshin Expressway Co., Ltd. Contact .......................................... 219 For recording database ........... 219 For after-sales service ........ 221 Specifications ............................................. 222 Such as trademark and copyright ....................... 223 Index .............................................. 225 Menu index .................................. 225 Concordance .......................................... 227 Symbol marks list ....................... 235 Page 11

Eleven Introduction CRA4803-A How to book conventions Signage Meaning Instruction mark Operation or the like will be noted in the context of performing, in order to maintain the performance of the product It describes the fact that I would like you to observe. Memo The operation on It should be noted and with that hint, describes such convenient ways you can use. Go back It represents the touch key. Example: Touch to return ← slide It represents the slide operation. For example, it will be referred to as "← slide" the slide operation to the left. It represents a button that is attached to the navigation body. Example: press the (menu) → italic I would like you to see text and title page or will lead to other instructions,. Example: → "find the location."

(P55) Long press / I long touch It indicates to press the (touch) it until you hear a "beep". Press continue / Continue to touch Press and are only between (being touched) it indicates that it is operating. Memo In this manual, SD memory card, are collectively referred to SDHC memory card is being referred to as "SD card". Illustrations and screen examples you use in this book, it may be different from the actual product. Screen of the actual product, due to the performance and functional improvement, it may be subject to change without notice. Proper nouns, such as product names that are mentioned in this document are trademarks or registered trademarks of their respective owners. • • • • This book of how to view Page 12

Twelve CRA4803-A Please read Attention to customers Of emergency facilities (hospital, fire station, police station, etc.) For search and route guidance, and in each facility Please check directly. This unit, the parking brake ON / OFF By detecting, by watching the video of the TV while driving It is so could not have been. It issues a navigation operations and disk When you put in, stop the car in a safe place Is allowed to, the car of the select lever N (New Tral) or to the P (parking) position, Per It goes carried out from over the parking brake Sai. The Kappuhoru when the monitor part of the unit is open Containers such as juice and placed in Zehnder interference

you might want to. Intelligent key is attached In the car, the intelligent key to the machine Or it may no longer work as close Since you, please be careful. If this unit was replaced put on another car, if Clause is installed in your car in a location other than the Toyota dealer If you gave Ri, sure, such as setting dealer always Please do the certification. ● ● ● ● ● ● For operation of the machine This machine, the touch panel and the body of the button Hoyo In fine steering switch (vehicles only) To manipulate. Of 3D hybrid sensor Automatic learning This unit, each overlapping the traveling, 3D hive Automatic learning of the lid sensor advances, positioning We are increasing accuracy. The explosion of the battery rise of car To Gutame When it comes to you use this machine, be sure of the car en Please over gin. It is multiplied by the engine When you use the machine when it is not, battery Lee is exhausted. Memo For environmental protection, it parked more than necessary idly Ing should be avoided. • Place to remove the battery terminal For re-setting of the case If you remove the battery terminal in the maintenance, such as, If the setting of each function has returned to the factory state Because there is, please set again. Other features that your own has been set have any Once Mashi goods, again set with reference to each page

Please refer to the constant. Page 13

13 Introduction CRA4803-A About SD memory card In the text, SD memory card and The SDHC memory card, convenience, "SD It is referred to as card ". This machine, SD card and SDHC card It supports (up to 32 GB). It also ensures the operation of all of the SD card There is no than. During access to the SD card, SD card Please do not remove the. In addition, car keys Please do not change the switch position. There is a possibility that the data may be damaged. The If it is damaged in the act, such as, compensation You ca n't. SD card has a limited service life. Normally used and such as iodide also have successfully writing and erasing There are times when it is no longer the operation. SD we are recognized by you have a personal computer If the card is, it is not recognized in rare cases this unit I have. In this case, the SD card not Depending on the condition, dedicated to format And certified by formatting tool You may want to identify. In addition, personal computer SD When you format a standard feature of To become a non-compliant format, Day Can other write or read, it is Kotogaa that problems such as not occur Since Ri you, in a dedicated format software It recommended that you perform the format operation Are we. However, if you format, SD Data recorded on the card are all lost You. During the format, be sure SD Car You can create a backup of Dodeta Please go.

SD card format software Is, of SD Association following Home It will be available than the page. https://www.sdcard.org/jp/ ● ● ● ● ● ● Not of the SD card in the format work To be construed as a guarantee by us the condition repair No. Furthermore, the present work, the SD card Loss of data, as well as, other damage occurs If you have, and not bear responsibility as our It does. And format software manual Well made and to read, to the end, your Format work in the original judgment and responsibility Please run. About the LCD screen LCD screen, the angle that looks on the structure clean It has been limited. When it is new , As screen look great, to see the corner And be sure to adjust the black density in accordance with the time There. In addition, you can change the brightness of the LCD screen You bet you can. And will be adjusted according to taste Please. (→ P25) For map data You need to insert the map disc in the player No. The map data, the machine built-in memory It is recorded in. Customers of the registered data About In the repair of the machine, the customer has registered Warranty of data, pardon Kedah Sai. Registered various functions to the navigation The contents of such settings, accident or malfunction, repair Resona Place to be altered or lost by other handling of There is a case. Important contents taken us a copy

Rikudasai. Should content has changed or lost With regard to damages and lost profits in the case We can not bear responsibility therefore absolutely, Oh Luo advance, please understand. ● ● ● Please read Page 14

14 CRA4803-A Copyright Recording data and programs to the machine Copyright, copyright for our company and our It was attributable to the third party that was granted the rights under Cage you. Customers, any form smell Even if all of these data and programs Replicate or part, modified, and vinegar, such as analysis You can not. The security features This machine, security machines by password It has a built-in function (theft deterrence function). Out Load at the time of the security function is operating or To do. Setting security functions as necessary Please be constant. → "to the security settings That "(P116) Other For the purpose of performance improvement of product, in this unit To record the operation history information (such as positioning result) It has the ability to. Contact the operation history information Personal information of the customers are not included. In addition, Base and the Company of this information our specification It can be analyzed only in the specified subcontractors We have become a mechanism, and have your consent It will be used only if the only digits. , Match this unit to your particular purpose It does not guarantee that you. The appearance and specifications of the machine, the pre for improvement You may want to change WARNING without. The

Modification of the product before the change in the case, or The other I do respond to request your replacement You. The fact of the camera screen, the performance and functional improvement Therefore, it may be subject to change without notice. Screen example, the actual screen you are using in this book And there are times when it is different. ● ● ● ● ● Please read Page 15

Fifteen Introduction CRA4803-A QUICK SETUP The basic configuration of the machine, it can be done easily in accordance with the instructions on the screen. After your purchase, you have not done and security settings when you begin using the machine for the first time If, automatically QUICK SETUP will start. The settings, change later You can also further. Do QUICK SETUP Items and order that can be set in the QUICK SETUP It is as follows. Security Settings Security of the navigation system You can set the utility. ▼ Volume settings Navigation of the guide volume, earpiece volume, ringtone You can set the amount and operation sound. ▼ Home setting I can home of registration and change. ▼ ETC mounting state setting It has installed a vehicle ETC equipment in the car

You can set up or not or. ▼ Bluetooth Settings You can register a Bluetooth device to this unit You. ▼ Vehicle information setting Car toll classification and parking restrictions, Length, width, you can set the height. ▼ Fuel consumption set Fuel consumption set of general roads and highways You can. The fuel the set a number based on Fee calculation is, to perform route search Was when, less most fuel consumption Lou To display the door as eco route Rukoto I can. ▼ Personalization settings User icon, user name, Anne The internal volume, operation sound, and map display You can be set on a per-user basis. Started QUICK SETUP Make One To start QUICKSETUP to Touch Memo If you want to set a later time, and set at the next startup to Please Touch. Also next startup QUICK SETUP will start. In addition, the unit If you from other startup you want to make the setting, (mesh New) - Setting and editing - QUICK SETUP from The settings can also be. Not set When you touch, QUICK SETUP The is not carried out, to display the map screen. However, the back If you have not done Kyuriti setting, Set Not you can not touch to. During QUICK SETUP setting, to the next I want to touch on To the next setting, Previous settings before you touch an You can move to.

Exit When you touch, the setting of up to that point Save and QUICK SETUP Exit screen (→ P18) It will move to. Setting items other than the ETC mounting state setting, it It is to be set individually from the Settings menu Can you. • • • • • Page 16

Sixteen CRA4803-A Security Settings Two Security function Touch to, Setting the Security of Memo The security settings to the setting of the password Is required. → "Setting the Security" (P116) • Three Next I want to touch on Volume settings Four + or - , ON or OFF Touch and to set in Adjust the volume of the "guidance volume" navigation voice guidance To you. "Beep" And set the ON / OFF of the operation sound of the machine You constant. "Earpiece volume" hands-free calls when the reception sound of We will adjust the amount. We will adjust the incoming volume of "Ring volume" phone. Five

Next I want to touch on Setting of home Six Home registration you will touch on Memo If you already have at home you are already registered, registration change is It will be displayed. Step Touch Seven To go to, It can be overridden by changing the home location You. • Seven Looking for a location (→ P55), decision It will touch on Eight Next I want to touch on Setting of ETC mounted state Nine Touch to choose the state Memo When set to "is attached to the car", feature set Constant (→ P101) "Smart IC consideration route search" of It will automatically turn ON. In addition, of either Even when the set function setting (→ P101) Of "ETC lane guide display" will be changed to ON. During route guidance, you will not be able to set. • • Ten Next I want to touch on QUICK SETUP Page 17

17 Introduction CRA4803-A

Bluetooth settings Eleven Device registration it will touch on Twelve Touch the device name to be connected Memo If the equipment to be connected is not in the list, the other party equipment Registering from Bluetooth devices by touching the Please register Ri. For more information "Bluetooth machine To register the vessel "(→ P107) Please visit. For more information about Bluetooth settings, "Make the Bluetooth settings" (→ P106) It is Goranku Please. • • 13 Next I want to touch on Setting of the vehicle information 14 Set the contents by selecting each item Memo Set parking limit (car make vehicle dimension), parking It is reflected in the guidance of the car park and toll road fees. And during route guidance, in the case of the highway mode, You can not set the "toll segment". • • Fifteen Next I want to touch on Setting of fuel consumption Sixteen Set the contents by selecting each item Memo Fuel consumption of the guideline has entered the factory. Input Fuel consumption to force customers I confirmed in such dealer Please enter the fuel consumption had left. • 17

Next I want to touch on QUICK SETUP Page 18

Eighteen CRA4803-A Setting of personalized User currently in use (→ P188) Dedicated You will do the setting. Eighteen Set the contents by selecting each item Memo For detailed settings of the personalization settings Te is, "To the user settings" (→ P188) The visit Give me. • 19 Next I want to touch on Exit the QUICK SETUP Twenty End it will touch on Previous One it will return to the previous screen. Introduction Back QUICK SETUP start screen (→ P15) It will return to. QUICK SETUP Page 19

19 Introduction CRA4803-A Prepare for watching TV After purchasing the machine, when the first time to visit the TV (one-segment broadcasting), it can be received Work (channel scan) to be registered on the machine looking for a channel is required. Until the channel scan is complete, you will not be able to visit the TV.

Memo Detailed information on how to television, "I see one-segment broadcasting" (→ P128) Please visit. Channel scan, please do in a place that is easy to receive radio waves of television. (Underground parking, etc. You may not receive radio waves. ) Or when you remove the car battery, the settings initialization (→ P119) Channel scan even when you are required. • • • One Bet the car engine Two When the map screen is displayed I press the (audio) ▼ AV source screen is displayed. Three TV I want to touch on Four Touch the screen ▼ Simple operation screen appears. Five More touch the ▼ Basic operation screen appears. Six Scan it long to touch ▼ ▼ If the channel scan is completed, the hand Levi screen appears. Page 20

Twenty CRA4803-A

Names and functions of each part Navigation body (the closed state of the screen monitor) Menu button (→ P25, 35) It will display the navigation menu. Long press and image quality adjustment screen (→ P25) It is displayed. Security indicator Security function is operating If that is be blinking I can. (→ P118) You are here button (→ P23, 24, 39) In the case of the navigation screen (showing the other location), It will display the current location. If during the current location display, and change the registration scale You further. In the case of AV source screen, You are here I switched on the screen. In either case, the screen, temporary and long press Basis you can turn off the screen. Audio button (→ P23,121) In the case of the navigation screen, AV It is switched to the source screen You. Press and hold, the AV source It can be in the OFF Vinegar. AV source is OFF Press and hold the AV source Before the AV source to the OFF It will return to the nest screen. Open button (→ P24, 27 ~ 29) Out of disk and SD card, Adjust the angle of the screen monitor It will display the operation screen of the eye. I ◀◀ / ▶▶ I button Track and file of down / up and rewind / Fast-forward and do the audio operations such as.

Volume adjustment button (→ P122) Volume adjustment of audio It will do. AUX input terminal (→ P144) Portable players Which external device to connect to Vinegar. φ3.5 mm stereo Insert the mini plug. Hands-free microphone Navigation body (state that opened the screen monitor) Disk insertion port (→ P27) Insert the CD and CD-R / RW To you. SD card slot (→ P28) Insert the SD card. Page 21

Twenty one CRA4803-A Basic operation Steering switch (vehicles only) MODE switch Radio and CD, it will switch the AV source, such as a TV. Long press and AV source It makes the nest OFF. ▽ / △ switch Audio, such as track and file of down / up and rewind / fast forward Oh it does. - / + Switch We will adjust the volume of the audio. Touch key of the current location screen User icon touch key User eye set in the personalization settings It will display the configuration. When you touch, in the use of the personalization features Can you. For personalization features, and details Clause "Using the personalization features" (→ P187)

Please visit. Congestion touch key (→ P77, 91) If we are to get the congestion information route If you are in guidance, and display congestion information To you. If it is not in the route guidance Is, it will show the regulatory information. View touch key (→ P41) Guests can choose how to display and orientation of the map, one-way mer You can set the display and non-display of a phrase or logo. The character of the expansion and map scale, which is displayed on the map It can also be done, such as registration. Wide area / detail touch key (→ P41) And roughly the display range of the map You can expand (regional) in Na display, Reduction in the precision displayed (details) to I or you can. Info window touch key And location information (city) each time you touch AV information (such as AV source names and playing in the title name) It will switch the. Easy destination search touch key When you touch, the grain a search item Table the destination menu that crowded Ri It is shown. For more information "Kan was Professionals named Search by destination Search "(→ P61) Please visit. Memo Display item of the location information of the information window (city name, traveling road name, latitude and longitude), set in advance You can in advance. → "function to the setting" (P101) When the information window is the case of "city name", "traveling road name", map scale display is equal to or greater than 100 m It will be displayed until the city name. Displaying detailed city map of 10 m ~ 50 m, city name, address name, Ding

It appears to the eye. There is also a place where it does not appear depending on the location. • • Names and functions of each part Page 22

Twenty two CRA4803-A Basic operation We'll explain the basic operation of the machine. Operated by touch panel Mark and items are displayed on the screen (operation Direct contact with a finger on the touch key) and (Touch That) it will be able to operate by. Example: End The final and menu that are currently open The completion was to return to the original screen. Go back Such as menus that are currently open It will return the screen to the previous screen. Slide operation And slide your finger while touching the screen up, down, left, or right Navigation by simply wells and audio You can operate some functions of the organization. One It will touch on the slide reaction area Example: CD Slide reaction area slide frame Memo Slide frame is displayed a predetermined time on the screen, slide It will show the id reaction area. Slide frame of the icon ( ) Is a finger It indicates the direction in which it is possible to ride. Slide eye of reaction area and the slide frame Con depends on the displayed screen. • • •

If slide reaction in the area, where the screen If you touch you can do the slide operation. Slide frame is to be turned ON / OFF display Can you. → "view the slide frame" (P119) • • ▼ Operation guide will be displayed. Operation Guide Two While touching the screen, run The slide your finger to the direction in Thailand function And release by de ▼ The selected function is displayed in an enlarged size, and function operation To you. Slide operation capable screen and each operation content Please refer to the following page. Page 23

Twenty three Basic operation CRA4803-A Basic operation Slide operation list Operation screen Behavior Navigation Route Information ➡ slide: display cancellation of route information ➡ slide: Display of the next guide land Intersection guide map ➡ slide: display cancellation of the intersection guide map ➡ slide: Display of the next guide land Roadblock consideration auto re-route ➡ slide: Check Roadblock Audio Transportation information

Slide: 1 620 kHz reception ➡ slide: 1 629 kHz reception Slides: unmute ➡ slide: mute Radio / TV Slides: channel down ➡ slide: channel up Slides: unmute ➡ slide: mute DISC (CD, CD-R, CD-RW) / Bluetooth Audio Slides: track or file down ➡ slide: track or file up Slides: unmute ➡ slide: mute SD Slides: file down ➡ slide: File up Slides: unmute ➡ slide: mute AUX Slides: unmute ➡ slide: mute Cellular phone Phone during an incoming call Slides: hang up the phone ➡ slide: answer the phone Operated by button Use the button on the unit, the switching of the screen, Display of the menu screen, I audio of operation Etc. It is possible to carry out. Switching of the screen how Navigation screen and the AV source Switched the scan screen Navigation screen (map screen) and the AV source One-A screen (audio / video screen) It can be switched in touch. One In the navigation screen (O Press the audio)

Page 24

Twenty four Basic operation CRA4803-A ▼ AV source screen is displayed. Two In AV source screen (Hometown) Push ▼ Navigation screen appears. Memo Even in a state of displaying an AV source screen and less There are cases where the information is interrupt display. Automatic display of -VICS emergency information (→ P91) - Intersection guidance display (→ P71) Interrupt display of the AV source screen (intersection guidance Display only), you can be ON / OFF. → "function to the setting" (P101) • • Temporarily turn off the screen (Navi standby) At night, if the screen is bright, such as temporarily You can turn off the screen. One Long press (Hometown) ▼ Screen will disappear temporarily. Memo When you touch the screen during navigation standby, original It will return to the screen. Also, pressing (Hometown) To display the current position screen by releasing navigation standby To you. When you press the (audio) Nabisutan Release the by to display the AV source screen. In Navi standby, voice draft of navigation Inside also will not be output. Sound of audio out

It will be a force. Back guide monitor (→ P149) During use, It will release the temporary navigation standby mode. At the time you have finished using the camera function, automatically It will return to the navigation standby mode. Also Navi standby by the ON / OFF of the ACC Not released. • • • • And adjust the angle of the screen monitor Make Come and adjust to a comfortable viewing angle the screen monitor It can be 憶. One Press the (open) Two + or - you want to touch on + Screen monitor opens one by one stage. Screen monitor will close one by one stage. Memo Angle memory of this machine was adjusted screen monitor Is, power supply OFF / ON (engine switch OFF / The ON) and it will be automatically adjusted angle even. If you want a different angle, and it will adjust again Sai. • Page 25

Twenty five Basic operation CRA4803-A Basic operation Manually or tool adjustment of the angle of the screen monitor Please do not forcibly performed using. Screen monitor

May fail with a strong force is applied to ter You. When you adjust the angle of the screen monitor, things Please be careful not to pinch. Caught mono In the time we had, remove the it caught thing Please adjust from. • • Adjust the image quality Brightness and view angles of the surrounding, to match the picture "Black of depth", "Contrast", "Brightness", "color Temperature "," depth of color ", adjust the" tint " Thing I can. Memo And automatically set the day and night in conjunction with the car lights It will switch to. Set of "black of depth", "Contrast", "brightness" Constant can be set separately in the day and night. Setting the "brightness" other than "color temperature" window You can be set separately for each type. "Color temperature", aging ne of LED backlight In any reason, you have displayed on the monitor of this unit If an error occurs in the color of the actual video and video It will adjust to such. Also the video during the display of the back guide monitor, and the following It is possible to adjust image quality by performing the operation You. The adjustment of the back guide picture, the ambient Please go while safely full consideration of. You can not operate while driving. • • • • • • One In the display screen of the image to be adjusted, (Menu) press for more than 2 seconds Two Touch the left and right of the touch key Adjust

Depth of black □ (white) Become thin ■ (black) Thicken Contrast (light and dark) Low The difference between the black-and-white is small High The difference between the black-and-white is large Brightness Dark Darken Ming Lighten Color temperature ■ (red) Warm color system becomes stronger ■ (blue) Cool system becomes stronger Color strength Pale Become thin Concentrated Thicken Tint ■ (red) Redden ■ (green) Become green Memo Depth of color, one-segment broadcasting or back guide It adjusts only if you are viewing the monitor image Rukoto I can. Shades, back guide mode only when Nita you are viewing a video, to adjust Thing I can. • Three Back to Touch Operation of the list screen Common operations on the list screen that is displayed during operation

We will describe. Operation Basic List Page 26

26 Basic operation CRA4803-A The feed page It will move one screen at a time. ▲ / ▼ It will touch on (And continue to touch, It will move continuously. ) The feed tab And Sen in the tabbed list The switch to a list of do's tab Ri I will instead. Tab (example: root Guidance it will touch on) 50 operation of sound tab Line feed The line feed the child a list You bet you can. (Example: Oh → or → Is the → was → I) Tab ( Oh ~ I standing) Chisuru It sends sound The sound list Feed child You bet you can. (Example: Oh → have → sales → e → e) (Eg tab Oh is repeated in) Touch returns 50 sound at the time of the side map display Operation of the tab Feed Na was revealed To put the list on the next page Rukoto I can. ▲▲ It will touch on

(Example: It was revealed → Yara Hama ) Memo To return to the list on the previous page, ▲ ▲ Touch the You. For side map, Attached to the "side map Te " (→ P46) Please reference to. • • Operation of the check list In the checklist, touch the item And (check mark) is displayed, select It indicates that it is a 択中. Again section When you touch the eye It disappears, selected release It is. Operation of the indicator with a list The indicator with a list, select an item List the right side of the indicator lights and is, it indicates that it is selected. Another To select the time item and indicator is off It is, will be deselected. Out of disk And using a manual or tool the opening and closing of the screen monitor Please do not attempt to place Te. Screen monitor You may want to failure and strong force is applied to. When the opening and closing of the screen monitor, and pinch your stuff Please be careful not. It was caught mono When it was waiting, remove the stuck ones Please open and close. Wearing the adapter 8 cm disk absolute Please do not use to. • • • Page 27

27

Basic operation CRA4803-A Basic operation Injury of finger Note When you open and close the screen monitors, fingers Etc. and attention so as not to pinch Do There. Please note especially for children. It may cause injury. Disk Inserting One Press the (open) Two Disk insertion touch the ▼ Screen monitor opens. Three Insert a disk Disk insertion port I to the label side ▼ Automatically when you insert the disc partway and retracted, the screen monitor is closed. Disk of the pickup type One Press the (open) Two Disk eject touch the ▼ Screen monitor is opened, the disk is automatic It will manner pushed out. Memo another one in a state in which the disc has been pushed up to the middle When you press the degree eject button, the disk is automatically and retracted, the screen monitor is closed. • Three Remove the disc, (O Press the Pung) ▼ Screen monitor it will close.

Page 28

28 Basic operation CRA4803-A And out of the SD card The Day of the SD card when you are using with this unit Even if others lost, and compensation of the lost data Nitsu Please pardon be had. And using a manual or tool the opening and closing of the screen monitor Please do not attempt to place Te. Screen monitor You may want to failure and strong force is applied to. When the opening and closing of the screen monitor, and pinch your stuff Please be careful not. It was caught mono When it was waiting, remove the stuck ones Please open and close. • • • When forced to carry out the loading and unloading of the SD card, and Ya this unit There is a possibility that the SD card may be damaged. PLEASE NOTE Give me. In SD card slot, even the non-SD card Please do not insert the. Gold, such as coins If you insert a genus products, failure internal circuit is damaged Of the cause. For safety reasons, while driving out of the SD card Please do not. • • • Injury of finger Note When you open and close the screen monitors, fingers Etc. and attention so as not to pinch Do There. Please note especially for children. It may cause injury. Of SD card Inserting One Press the (open) Two

SD card insertion touch the ▼ Screen monitor opens. Three SD "clicks" and until the sound is Plug the card The label side Plugging in SD card slot SD card Four I press the ▼ Screen monitor it will close. Lee in a state in which the SD card is not fully inserted Close the screen monitor and press the button object Rukoto can not. In addition, the SD card when the Message and sound proposal to encourage the correct insertion of the soil It will be inside. Do be sure to insert the SD card Please press the Luo eject button. • Removal of the SD card-type One Press the (open) Two SD card removal and touch Make ▼ Screen monitor opens. Page 29

29 Basic operation CRA4803-A Basic operation Three SD "clicks" and until the sound is And release by pushing the card ▼ SD card will be pushed out. Four

Straight pull out the SD card, Press the (open) ▼ Screen monitor it will close. Picture in a state that does not completely remove the SD card Please do not close the surface monitor. The card It may be damaged. In addition, SD Car Soil Press the center slowly, straight-preparative Please put out Ri. SD card taken out, put in a special case By Runado, please keep. Also, a false So that there is no such child swallow Te, Please be considerate to storage location. • • Page 30

Thirty CRA4803-A Conversion cut the method of character input Obtain Character input of this unit, two methods (keyboard Child is carried out by selecting from a de system mobile phone system) You bet you can. One Or It will touch on Each time you touch, the conversion to cut as follows Wari you. Keyboard system ▲ ▼ Mobile telephone system Flow of character input operation Flow of general character of the input operation, the following It will be the cormorant. To switch the type of character → Enter the characters To → non-conversion, do the conversion → character input I want to end the Switch the type of character One

It will touch on the type of character ▼ Type of character is switched. Memo To the Chinese character conversion input, Kana and then touch. To the katakana input, once hiragana input After switching, Cana and then touch. • • Character input operation "ATOK", Ltd Registration of JUSTSYSTEM It is a trademark. When you register such as the location of the name and phone number, enter the letters and numbers. Here, Is displayed during menu operation, it describes how to input operation of letters and numbers. Memo Letters, numbers, Katakana, Hiragana, Kanji, symbols can be entered. Depending on the item, you may be the type of characters that can be used is limited. For example, in the case of a name search, the ratio Lagana are not available other than the input. This unit, the character input conversion system, JustSystems Corporation "ATOK ® "I am using. • • • Page 31

31 CRA4803-A Basic operation Enter a character Basic operation If you want to enter on the keyboard method One Touch to the character you want to input If you want to enter the mobile phone system One Or the character you want to input is displayed

In, you want to touch the key Input Example 1: Japan Na Touch twice to → "to" It is to touch two five times → "to the ho" Wa Touch three times → "Japan" Input Example 2: Ota Oh to Touch 5 times → "Contact" > Touch to → "Contact _" Oh to Touch 5 times → "many" Other Touch once → "Ota" Switch the full-width-half-width Katakana, in the case letters, numbers, symbols em You can switch the single-byte. One Em or half-width touch the ▼ It will switch to full-width or half-width. Voiced, half-voiced, the upper / lower case Change In the case of hiragana and katakana, and chose a character You can add a voiced sound and semi-voiced sound by, lowercase It can be switched on. One ゛゜lowercase I touch the ▼ Each time you touch, the cursor left and character But it will change as follows. Lowercase → voiced → half voiced → original character Return to the Example 1: Tsu Tsu → ~Tsu → Uz → Tsu Example 2: Ha Ha → bus → pa → C Uppercase / lowercase Switch the character During alphabetic input, upper / lower case You can switch between. One Large / lower case I want to touch on ▼ Each time you touch, uppercase and lowercase letters off Ri I will instead. Character input operation

Page 32

32 CRA4803-A Move the cursor position One The top right of the screen < - > it will touch on ▼ Move the position of the cursor only touched minute You can be. Memo If in the character input, the cursor is displayed in the same color And it can be moved within that have been character range You. If the input screen in the search, the < - > The cursor in It is not possible to move the le. If in kanji conversion, and a range of characters to be converted It can be changed • • • You want to delete a character One The car on the right side of you want to delete a character Move the Sol, remove standing in Chisuru ▼ Each time you touch, the statement to the left of the cursor Character is deleted one character at a time. Cursor If that someone is on the left end, removed the right of the character It is. Only the necessary amount by deleting the character, It will repeat the input. Memo Delete When you long touch, all of the characters once You can be removed. • Free up space One Of the character we want a space Move the cursor to the right, Space I want to touch on

▼ space is inserted only touched minute. Insert a character One To the right of where you want to insert a character Move the cursor ▼ It is inserted text at the cursor You can. Memo Cursor, range of characters that are displayed in the same color You can move in 囲内. • Character input operation Page 33

33 CRA4803-A Basic operation Do non-conversion, the conversion You can directly enter the Hiragana, Hiragana I will convert such as kanji and katakana. Conversion Conversion, which is displayed according to the characters entered Be selected from the candidate (predictive conversion function) You can. Make a non-conversion input One Enter the characters in hiragana, No conversion I want to touch on ▼ It is entered in hiragana. Make the conversion input One Enter the characters in hiragana ▼ conversion candidates is displayed in response to the input characters Will. Two Conversion Touch to, confirm or All confirmed I will touch on Memo

Next candidate When you touch, the candidate list appears You. input when you touch on the converted character you want Can you. Λ or Λ When you touch, the character to be converted You can change the range. • • ▼ It is entered in the converted character. It wants to end the character input One Input end it will touch on Character input operation Page 34

34 CRA4803-A Symbols can be kana Academic symbol Reading Symbol Equal = Congruence ≡ Dainari > Will award < Vatu × Inequality sign ≠ ≦ ≧ «» Plus / + + Minus / grind Plus or minus

± Mugen / Mugendai ∞ Because ∵ Therefore ∴ Play × Waru ÷ Greek character Reading Symbol Alpha / alpha Α α Η Ηη Iota Ιι Epsilon Εε Upsilon Υυ Ohm / omega Ωω Omicron Οο Buy / key Χχ Cucumber Κκ Gamma / gamma Γ γ ξ / xi Ξξ Theta Θθ Zita Ζζ Σ Σσ Heavy rain Ττ

Delta Δδ New Νν Pi / copy Ππ Φ / fee Φφ Psi / Pushiー Ψψ Beta Ββ Μ Μμ Λ Λλ Low Ρρ Parentheses Reading Symbol Parentheses '' "" () [] [] {} "" "" "" [] Symbol mark Reading Symbol Black spot ★ Black circle ● Win ☆ White circle ○ Participation △▲▽▼ Viewing angle ◇◆□■ Zukei

☆★○● ◎◇◆□ ■△▲▽ ▼ Circle ○●◎ Beetle, Epilachna round ◎ Diamond ◇◆ Star ☆★ Male ♂ Female ♀ Postal 〒 Unit Reading Symbol Yen ¥ Angstrom Å Celsius ℃ Capital relocation ¢ Unit ° '"℃ ¥$¢£ % Etc. °℃ Nikki at $ Percent % View Per ‰

Tack " Poop ' Lb £ Point Reading Symbol Voiced sound mark ゛ てん ,, ... ‥ Handakuten ° Circle .. Arrow Reading Symbol Arrow →←↑↓ Other Reading Symbol Asterisk / Asterisk * Attomaku @ Ampersand & Note ♪ From / to ~ Rice / Star ※ Sharp ♯ Lane

/\ Section § Dagger † Daburudaga ‡ Aimlessly ♭ Character input operation Page 35

35 Basic navigation operation CRA4803-A The basic operation of the navigation Operation of the navigation menu To use the various functions of this machine, the beginning To me to display the navigation menu. One In the navigation screen And press (menu) ▼ Navi menu appears. Information Of congestion information and the unit system Such as information, the operation of the various types of information To display the menu to perform You. Destination For finding a destination and location It will display the menu. Setting and editing Set of navigation functions Constant, audio settings, telephone and Such as the setting of communication, various settings The Table menu about editing It shows you. Cellular phone For using a mobile phone function It will display the menu.

Bluetooth device is not registered If you encourage the registration message Message appears. Yes to Touch, and carried out the registration operation Please be. (→ P106) Eco-Manager Eco prize and eco-driving Review Check value of history, fuel consumption set Etc., the menu on eco It is displayed. Route editing Such as route editing and erasure View menu to perform turf Vinegar. (→ P78) Root erase To clear the route in guidance (medium Stop) the. (→ P80) Information Menu Congestion information The check and information acquisition congestion information Do you. (→ P92) Data version Display Map data that has been recorded in this unit The version of the search data You can check. (→ P100) Maintenance Car of consumables (engine oil And the time to replace the tire, etc.) Message display to inform Setting of I can. (→ P96) System information and serial number of the machine Hoyo Fine sensor learning of the situation and the machine Make the information of devices connected to the You can sure. (→ P98, 99)

ETC The dealer installed option on the machine Down the navigation interlocking ETC system It is displayed when you connect, It is possible to confirm the ETC usage history You. (→ P94) Page 36

36 The basic operation of the navigation CRA4803-A Destination menu Name Search by entering the name of the destination You. (→ P55) Street address Search by entering the destination address You. (→ P56) Genre Ken specify the genre of destination You search. (→ P57) Surrounding facilities Specify the genre of the vehicle surrounding facilities It is then retrieved. (→ P57) Phone number Ken enter the phone number of the destination You search. (→ P59) Registered location The destination is selected from the registered point Nde it finds. (→ P59) Search history Destination from the point where it was searched in the past And choose to search. (→ P60)

Home It will search for a route to the home. (→ P54) Home of the tow if home is not registered We will do the recording. (→ P54) Map code Enter the map code of destination It finds Te. (→ P60) Setting and editing menu QUICK SETUP Following the instructions on the screen, the unit of a group We will make this setting. (→ P15) Navigation set and edited by the navigation function We will do the collection. Audio The setting and editing of audio function Do you. Telephone and communications Setting and editing of telephone and communication functions It will do. Navigation Navigation data Edit Day, such as registration areas and traveling locus We will do other editing or erasing. (→ P83, 87) Navigation function set to line set of navigation functions There you. (→ P101) Volume settings The Ya guidance volume of navigation The adjustment of the operation sound, hands-free We will adjust the volume when. (→ P111) System Settings Make the settings for the system. (→

P111, 116, 119, 170, 171) Vehicle information setting make the setting of the vehicle information. The settings are, parking and toll It is reflected in such fee guidance of the road Will. (→ P113) Vehicle position correction is set if the vehicle position is shifted To you. (→ P115) Page 37

37 The basic operation of the navigation Basic navigation operation CRA4803-A Audio Audio Setting You can set the audio function You. (→ P145) TV set Setting of one-segment broadcasting reception function It will do. (→ P132) Video screen clock Display You want to display the clock on the video screen on the You set or not. (→ P123) Telephone and communications Bluetooth Setting This unit and Bluetooth device Set in the case of Bluetooth connection To you. (→ P106) Volume settings The Ya guidance volume of navigation The adjustment of the operation sound, hands-free

We will adjust the volume when. (→ P111) Mobile phone data Edit Reading and application of the memory dial Such as the elimination of credit history, mobile phone information And edit and erase Hou. (→ P182) Mobile phone menu Dialing or a phone call by entering the phone number You only. (→ P180) Memory dial power by calling the memory dial We will put the story. (→ P180) Call History Arrival and departure it will display the trust of history. (→ P180) Redial I will make a phone call in the redial. (→ P181) Bluetooth Setting This unit and Bluetooth device Set in the case of Bluetooth connection To you. (→ P106) Edit and erase Reading and application of the memory dial Such as the elimination of credit history, mobile phone information It is subjected to editing and erasing Hou Can you. (→ P182) Eco Manager menu Eco prize Thumbnail screen of eco prize It is displayed. (→ P186)

Fuel consumption set Criteria of eco route display of measurement Make the fuel consumption of the settings that the. (→ P186) Eco-driving evaluation History To view the history of eco-driving evaluates the Vinegar. (→ P185) Page 38

38 The basic operation of the navigation CRA4803-A Shortcut menu Operation Automatic to after looking for a place to move the map Manner the displayed menu that shortcut It called the menu. Route search and point Registration, be carried out such as the display of detailed information Can you. One The scroll or location map Find (→ P55) ▼ To display status of the position and the map of the cross cursor Thus, the short cut in accordance with the respective -Up menu appears. When scrolling screen I register here Is this the current cursor position It is possible to be registered in the machine You. (→ P81) Look for the surrounding facilities Facilities around the cursor position Search by selecting a genre You can be. (→ P57)

Go to here Destination the arrow cursor position As, or to perform a route search Vinegar. (→ P63) Search results when the screen Information Search location to the detail information place where the data is recorded If the display detailed information turf Vinegar. (→ P62) I register here and registers the search location to the machine You can be. (→ P81) Look for the surrounding facilities Search location around the facility Search by selecting a genre Thing I can. (→ P57) Go to here the searched location and destination Te, it will make the route search. (→ P63) Memo the found and to scroll the map after inspection Back to the search point , but it appears. When you touch, To return to the point before the scroll. • Page 39

39 Basic navigation operation CRA4803-A Operation of the map screen The map display of the navigation displays the current location of your car (the vehicle), "You are here image Location to display that you want to see the plane, "there is a" scroll screen ". You want to display the current position screen

Even if any screen, you can return to quickly present location screen. One Press the (Hometown) ▼ You are here in the map will be displayed. Memo In a state in which to display the current position screen (You are here) When you press, map scale that was registered (→ P44) To To switch (you are viewing in the registration scale It does not work in this case). • You are here screen see how Normal view Bearing mark Red orientation mark There triangle indicates North To you. Scale display Touch key Under ] There of scale It shows the distance. (2D display only) Current time Locus display GPS receiver in the mark ETC CARD mark Vehicle mark Traffic information provision time display During SD access mark smartphone cooperation mark For more information Please visit. Bluetooth connection in the mark "I use the smart phone linkage function" (→ P193) Page 40

Forty

CRA4803-A Memo And when you use the first time this unit, when you did not use a long period of time, it takes to to display the current location about 5 minutes There is a thing. • Vehicle mark is, you may deviate from the actual location. Trajectory display, you can view the travel locus of about 250 km worth passing through until now. Usually white, the car speed Red when less than 5 km / h, is 5 km / h more than 20 km / h time of less than it appears in terms of orange. ETC CARD mark, Navi linkage ETC system of dealer installed option can be connected to this unit, and ETC Card will be displayed if the insertion already only. Current time, it is displayed based on information from the GPS satellite. It is not possible to time of change. • • • • Moving the map (scroll) Move the map to the location where you want to see on the map. One Touch in the direction you want to see on the map Make ▼ map as the touched location becomes the center That it will move. Memo Scroll Move your finger while touching the screen also it works, and away from the center of the screen cursor to Enough to touch was in place, the speed at which you scroll It will be faster. However, while driving it was touch You can only scroll to the location. 8-direction arrow (→ P40) Showing or Shitima~tsu -Flops (→ P42) In the case of, the scroll operation while driving It can not be done to the.

• • Two If the position you want to fine-tune, Tweak it from Touch, fine The integer you want the direction of the arrow (8 directions) It will touch on ▼ ▼ Each time you touch the arrow, map little by little One it will move. Once again fine-tuning When you touch, 8-way Direction of the arrow will disappear. Memo Operation of fine-tuning, the map display mode of normal If the view is possible only. • Operation of the map screen Page 41

41 Basic navigation operation CRA4803-A Change the scale of the map Map in the range of 10 m ~ 500 km scale You can change the le. One Details or wide area it will touch on More detailed map than appears. Table Range shown will be narrower. Wide-area map is displayed in a wide range from. Narrow roads, etc. will not be displayed. Memo Detail and wide area each time you touch the, and 10 m, 25 m, 50 m, 100 m, 200 m, 500 m, 1 km, 2 km, 5 km, 1 0 km, 2 0 km, 50 km, 100 km, 200 km, 500 km and vinegar Kale display will change. Details and wide-area and continues to touch, in succession You can change the scale. •

• Change the display method of map The map display method according to different situations You can change. One View I want to touch on Two I want to touch on the display method of map Memo Highway mode is selected only in the toll road traveling You can. • Scroll the screen look the way Normal view Line connecting the crosshair cursor from the current location Cross-hair cursor Operation of the map screen Page 42

42 CRA4803-A Type of display method Normal view It is displayed in the normal map (2D map). Detailed city map recording area (→ P218) In, Detailed city at the time of the 10 m ~ 50 m scale Town map is displayed (City map). Memo Automatically usually land in the vicinity of the boundary of the city map The display switches in the figure. City map You can also display the boundary. In that case, City map only appear in the vicinity of the boundary, boundary The outside nothing is displayed. City map display and the City map boundary table Shows can be ON / OFF. → "function to the setting" (P101) • •

Sky View Map as seen from the sky (3D Map) There will be displayed. Eco-information display Eco-driving evaluation screen (→ P185) There, the right side of the map It appears in. Highway mode Fee is a special screen at the time of the road traveling. Distance and rates up to the front of the toll road facility, expected Arrival (passage) time, and whether the branch is displayed You. For highway mode, "Highway For by mode " (→ P50) Please visit. Change the orientation of the map Map display orientation in the normal view F There are fading up and north-up. The factory is "heading up". Heading up One View - heading up to Touch Operation of the map screen Page 43

43 Basic navigation operation CRA4803-A ▼ So as to be above "direction of travel" is always, map That it will rotate automatically. North up One View - North up standing in Chisuru ▼ It will be displayed as "north" is on top always. 100 m scale one-way

I ON / OFF the display One-way mark to be displayed in the City map A, a call to be displayed even when the 100 m scale You bet you can. The factory is "OFF". One View - 100 meters scale while Traffic display touch the ▼ The 100 m scale while each time you touch Traffic display of ON / OFF is switched. Memo For the side maps highway mode table It can not be shown. We have to set the scale of the map in addition to 100 m That case, automatically 100 m vinegar When set to ON It switched to kale. • • Operation of the map screen Page 44

44 CRA4803-A ON the enlarged display of character / To OFF Statement of place names and facility name to be displayed on a map screen You can to enlarge the character. The factory is "OFF". One View - character enlarged display of map It will touch on ▼ Characters enlarged display each time you touch ON / OFF is switched. Register the scale For each display method of each map, the scale You can register Le. The registered scan Kale, the map screen by pressing the (Hometown) It becomes the scale at the time of the display. One

Scale you want to register the map screen Display in Two View - scale registration I will touch on ▼ A confirmation message will be displayed. Three Yes I want to touch on To the display settings of the logo The table the logo of various facilities on the map You can make shown. One View - logo display setting It will touch on Operation of the map screen Page 45

45 Basic navigation operation CRA4803-A Two Ja you want to display the logo Touch the Nru ▼ The selected logo will be displayed on the map. Choose from all of the list Choose from all the facilities that are registered in this machine You. One View - logo display setting - Full list you want to touch on Two Ja you want to display the logo Touch the Nru Three Facility you want to display the logo It will touch on ▼ Indicator of the selected facility lights is, you can choose continue. Memo

The indicator also lights up if you select more than one You. When you touch the facility again, the indicator consumption The lights will be deselected. • • To select the other facilities, and returns to step Touch Two Returning to the screen, the procedure Two ~ Three Repeat the go Please. • Four End it will touch on ▼ Back to the map screen, Rogoma of facilities that chose Clause appears. You want to customize the list Changing settings in the list corresponding to the favorite I can. In addition to the genre name, the facility name You can also be displayed. One View - logo display setting - Customize it touches the Two Touch to you want to change genre name Three It will touch on the genre name of your choice Operation of the map screen Page 46

46 CRA4803-A Four It will touch on the hope of Facility Name ▼ Step 2 to return to the screen of the list is changed You.

When subsequently performing a changing operation, Step 2 Please repeat the subsequent operations. You want to hide the logo Turn off the display of the selected logo from the map The, you do the following. One View - logo display setting It will touch on Two Display: ON touch the ▼ Display: OFF it becomes, It is chosen logo It will disappear from the map. Memo Again to display the logo, Display: OFF Touch Display: ON I want to. • You want to display the coordinates It will display the coordinate information on the current location. One You are here screen, (Hometown) Push Two Coordinate it touches the ▼ Coordinate information is displayed. About side map Lee Find highway mode display and location place to strike the screen, displaying the information such as screen If the map screen is displayed on the right side of the screen (Side map). Memo For basic operation of the list, "Basic Operation of the list " (→ P25) Please visit. For the operation of the side map screen,

"Side Operation of the map screen. " (→ P47) Please visit. • • Operation of the map screen Page 47

47 Basic navigation operation CRA4803-A Highway mode In highway mode, the current position or combing To roll destination facility map of again map It will be displayed. List screen In the list screen, such as when you find a location, select Map in the vicinity of the facility, which is the Saidoma~tsu It appears in-flops. Candidate display screen In the candidate display screen, the facilities have been selected The location of the map will be displayed on the side map. Information screen In the graphic information and character information screen of VICS, Information Map of the area surrounding the vehicle position along with the screen again It appears in the map. Operation of the side map screen In the side map with list screen, is selected Position of the list item that is a, Saidoma~tsu It appears in-flops. Information Detailed information of the location you have selected (→ P62) You can display a. Go here as a destination to the location you have selected Route search (→ P63) It will do. Memo

Scale display ( 100 meters When you touch, etc.), You can change the scale. • Operation of the map screen Page 48

48 CRA4803-A Safety informational Tion Various guidance for safe driving according to the situation It takes place. Toll road attention point Border guidance Approximately ○ kilometers from here Until then, be aware enough operation Please be. The earlier, the confluence there from the right Ri you. Please note. The earlier, the confluence there from the left Ri you. Please note. Ahead, there is a confluence. Please note. ○○ it enters the prefecture. • • • • • Railroad crossing guidance This is a former railroad crossing. Rather Notes Please. Refresh guidance I will be soon 2 hours. Why do not you break? Light lighting guidance shortly day is late. La Please refer to the confirmation of the thread. e start guidance is sudden acceleration. Mind the safe driving Let cliff. Narrow street guidance Note to the actual traffic regulations and road width Please traveling in mind.

Memo Toll road attention point-border guidance, run a toll road Only in a row it is done. Railroad crossing guide, there is no railroad crossing ahead of the road while driving If you are guided if there is a railroad crossing near even if I have. Also, it is guided at all crossings Not divided. And even when the sunset time, already lit light If you are, the light lighting guidance does not take place. ON / OFF can for each of the guide Vinegar. → "function to the setting" (P101) For conditions such as the following, are not guided Be the case and the actual situation and the different guidance There. Actual traffic conditions and traffic rules and signs Please be operated in accordance with such. - When the vehicle position is not displayed correctly - The way in actually traveling with the map that is displayed when the road situation is different • • • • • About e Start Us Speed from the start start until after about 5 seconds Upon detection of more than 41 km / h, sudden acceleration of warning It is guided by the WARNING message and voice. Memo e start guide I can ON / OFF. → "function To the Settings "(P101) • Operation of the map screen Page 49

49 Basic navigation operation CRA4803-A On the screen that is displayed while driving

About When the signal approaches The traveling direction, a signal within about 300 m Mark of the machine will be displayed up to a maximum of five locations. When traveling on the toll road When traveling on the toll road, automatically highway Instead cut into by mode (auto high Way mode). Memo Auto highway mode, ON / OFF can Vinegar. → "function to the setting" (P101) There are also some display outside the scope of the toll road. To manually switch to the highway mode, Yu The "leaf in the view switching menu in charge during the road traveling Choose the Iu~ei mode ". → "Show how the map We change the law. " (P41) • • • Operation of the map screen Page 50

Fifty CRA4803-A For highway mode The distance of the highway mode, until the interchange and service area that is currently headed Away, and you can confirm and facility information. In addition, in accordance with the running of the car, automatically the next facility It will switch to the information. Facility information of the main line or on the branch destination also, you can see. Highway mode You are here screen of seeing how Toll road facility information close to the second Facility Feed touch key Screen is changed to the cursor mode, and sends a toll road facilities in order of proximity to the current location

It will continue. Use, for example, if you want to see the toll road facility close to the fourth. You are here Display (Side map) Toll road facility information close to the first ETC lane guide Or the presence or absence of the ETC board equipment It is displayed unchanged. Toll road facility information close to the third SA / PA Feed touch key SA and (service area) PA (parking area) We will send only to order You. Memo Map the orientation of the side map of highway mode will be heading up fixed. In the highway mode, each type of facility (IC / PA / SA / JCT / lamp / toll / smart IC) and facilities Distance and expected time remaining until arrival (pass) from the 設名 and location will be displayed. The following facilities and service information of the facility (→ P52) It settled to when descended from the fee (pass or toll road and In the case of facilities) is displayed. When you touch on the map portion of the side map, it is used to display the map in the vicinity of facilities in location and selection Can you. SA / PA Feed If you touch, you can send only the service area and parking area in order. If the illustration information to the next facility is recorded, if you select the next facility, illustrations will be displayed. If there is a branch destination route to the next facility, you can select the branch destination. If the branch facility and SA / PA to the next facility is the hotel, you are prompted to select either. If you have to get the VICS information, VICS information (→ P89) There will be displayed. During route guidance, when it comes to approximately 1 km before the toll road exit guide of the toll road exit is displayed, an exit Automatically highway mode when you pass will be canceled.

View If you touch, you can switch to choose another display map. Also, from other map display If you return to the highway mode, the right screen will be displayed in the map display of the angle of the previous. (For example, just before the earth If diagrammatic representation of Skyview, right screen of highway mode will be displayed in 3D. ) • • • • • • • • • • • Operation of the map screen Page 51

51 Basic navigation operation CRA4803-A About price indication If you set a route on the toll road, Rates may not appear. If the price of non-compliant route to " ***** " If it contains fee non-compliant routes " ***** Yen or more "is displayed. Rates display is possible because, urban expressways, urban During high speed, and it is part of the toll road. → "Paid For road fee data " (P219) Rates displayed, by the vehicle setting, midsize car, Ordinary car, it can be switched to light car. → "Setting the vehicle information."

(P113) Correspondingly, for the various ETC discounted rates No. See ahead of facility information In the highway mode, it is allowed to postpone the facility You can see the destination facility information Te. One Next facility , before the facility is touch And then choose the facility you want to display Facility in selection Memo By directly touching the previous facility, select the facility Rukoto I can also. Side map (→ P46) Peripheral facilities in selected to Of the map is displayed. During route guidance, the facility is sent along the route You. If you touch to the facility in the selection, facility periphery of the selected You can display the side of the map. Map the displayed facilities, search history (→ P60) It is registered in You. illustrations information has been recorded in the selected facilities If, illustrations will be displayed. If there is a branch destination route to the selected facilities, and branch The screen to select the destination is displayed. • • • • • • • • • • • You can see up to 100 facilities destination.

branch facility and SA / PA is annexed to the chosen facility If you have that, the display screen to select either It is. When you press the (Hometown), highway mode current of Hometown screen appears. • • • See the branch destination of the information of the branch facility The If the route is not set, running It is possible to see the facility information along the route You. Branch facility in the middle, regardless of the presence or absence of the route If so, look at the previous information by selecting the branch destination Rukoto I can. One Standing in the facility name by selecting the branch facility Chisuru Two Touch to branch destination you want to see Memo Map When you touch, the land of the point where there is a branch facility It will display the figure. After confirmation, Back When you touch, To return to the menu screen to select a branch destination. • Operation of the map screen Page 52

52 CRA4803-A ▼ Branch destination of the route will be displayed. Service area and parking d Information that is displayed in the rear Store information Toilet for the disabled Restaurant Shopping Corner Highway Oasis Dog run

Nap resting place Snack Corner Information Highway Information Terminal Bath Facsimile Post Cash Service WC Memo Store information, estimated arrival time and business time to the facility But it is taken into account, the available facilities (Example:) is available with No facilities (Example:) is displayed is distinguished. (D Work time account display) The information displayed at the same time is up to eight. Nine or more If there is a top of information, priority table in order of the above table the indicated, it does not appear after the ninth. Biweekly regular holiday, occasional holidays and irregular management It does not correspond to the work time. The actual management The work time may be different. • • • Illustrations display of facility When you touch the facilities such as SA and PA, If the facility of illustrations information has been recorded It appears in. ▼ Memo Map When you touch, the point where there is a SA and PA It will display the map. • For congestion information display If you are getting the traffic jam information, the vehicle position Closest congestion situation (traffic jam or congestion) Contact Table on screen preliminary regulatory information until 3 in the order close It is shown. Memo When there is a traffic control between the facilities, and congestion information Marr Click

(→ P91) There will be displayed. • Operation of the map screen Page 53

53 Basic navigation operation CRA4803-A When approaching the toll of toll road It ETC lane guidance display is set to ON If that is the charge on the main line that there is ETC lane Place, or when approaching the exit toll, ETC Leh Down guidance is displayed. Memo ETC lane guidance display I can ON / OFF. → "Ability to set" (P101) ETC lane guide display is different from the actual signboard There is a case. Na are illustrations data is recorded by a point If the stomach, it does not appear. QUICK SETUP (→ P15) ETC mounted state set of At a constant, and was set to "is attached to the car" place If it is, is automatically ETC lane guidance display settings It will be "ON". • • • • In ETC card expiration notification About Power ON at the machine, ETC which is connected to this unit If the ETC card is inserted into the vehicle-mounted device, And the message displayed by the ETC card information Voice guidance will be performed. Memo versus the expiration date notification feature the connected ETC board equipment

If you do not respond, but does not assistance. • - During normal cases Message: ETC available. ETC card expiration date: 20 ○○ 年 ○ month Voice guidance: ETC card is inserted Salema It was. • Example of case expiration of the current month Message: the ETC card expiration date This is the end of this month. The Make a card Please be sure. Voice guidance: the ETC card expiration date this month It is the end. We will continue to check the card Please. • Example of the case has expired already Message: the ETC card expiration date It has expired. Voice guidance: the ETC card expiration date the switching It has been. Operation of the map screen Page 54

54 CRA4803-A Go back to home When you register your home, Lou up home with a simple operation even if they go to the country where You can make bets assistance. I want to register a home In When you register your home, simple operation I can route search of the home. One To stop the car at home, (menu) Press and destination - home - yes It will touch on ▼ Home is registered. Memo When you register your home to a new, named "Home" Home mark and

It will be automatically input. When you are stopped at a location other than home, "Location Find "(→ P55) With reference to locate the home of location Please be. QUICK SETUP (→ P15) In also be registered in Can you. When you register to find a location, and registered as a home You can also be. → "I want to register the location." (P81) Home of the position I can be changed. → "of registered land registration You want to edit the contents. " (P83) If you already have at home you are already registered, registered Remove home (→ P84) Please go after. Operation and QUICK SETUP to register the location In case you want to re-register the home, you can override the home You. • • • • • • I route search to your home as a destination the registered home, route search It will do. One Press (menu), destination - home it will touch on ▼ Route search of up to six maximum of up to home Will. Guidance start When you touch, Lou To guide is started, and the screen depending on the situation

Route guidance is done by voice. Home It approaches and route guidance is terminated. Page 55

55 Inspection Rope CRA4803-A Look for a place Navigation operations begin from the fact that to find the location (destination, such as a stop-off destination destinations) Ri you. If it is possible to display the destination of the map, set the root to the bottom Or, you can be watching for more information. Memo Depending on the searched location, if the displayed map is not a map of a pin point around the destination there Ri you. In that case, a message indicating that it is not a pin point is displayed, the map of the representative point is displayed. If you search the facility, please set at the destination after a search without directly scroll. For example, highway When you scroll through the streets of the facility after the search is set to destination, the there if on the open road is the destination Ri you. In the search on a natural, you may point there is no road around is displayed. Such a place Where, please set the destination on a nearby road Scroll through the map. The location is not around the road When the destination, you may not be able to route search. If the Search location (facility) parking data has been recorded, to guide the parking lot of the facility as the destination you might want to. (Parking point link) • • • • Look at the map You can find on the map. One It is allowed to scroll the map, it is an object of the Adjust the cross cursor to the location Subsequent operations, shortcut menu

Operation of (→ P38) Please reference to. Look for the name Accommodation and leisure facilities, such as the various facilities You can search by name. One Press (menu), destination - name it will touch on Two Enter the name of the facility in hiragana is, candidate display Touch to Genre can narrow down the view by genre You. Area You can narrow down the view by State You. Page 56

56 Look for a place CRA4803-A Memo It is not possible to input other than the hiragana. Katakana, Kanji, Roman, and look for the facility, including the numbers Liver, enter in hiragana all. Name Enter only the portion you know, and search to Rukoto you can (keyword search). Input of the voiced sound (Bu) and semi-voiced (°) it can be omitted. In addition, such as double consonants (Yo) it can be substituted with such (good). Name I can enter up to 20 characters eyes. Search method, the character that is nearest to the number of characters you entered It will display the number of facilities. Depending on the input contents and narrowing condition, and Ken Result of search, of that there is no corresponding data message There is a case where the information is displayed. • • • • •

• Three Look for the purpose of the facility from the list Order of the Japanese syllabary It sorted in alphabetical order. Four It will touch on the facility name ▼ Facility near the map and shortcut menu New appears. Subsequent operations, shortcut menu Operation of (→ P38) Please reference to. Look for in Address You can search for an address or place name. One Press (menu), destination - Address I will touch on Two Prefecture name, city name, place name It will touch on order Three Touch by selecting an address from the list Make Memo Major portion Touch to, the chosen representative areas of the region It appears map of points. Address input When you touch, the finger by entering the address It can be constant. In the case of address direct input, do not enter the address Input end When you touch, chome or address name Representative point is searched. If you know to contain Oaza-Koaza is, respectively Enter. • • • • ▼ map and show with a focus on the entered address

To cut menu appears. Subsequent operations, shortcut menu Operation of (→ P38) Please reference to. Page 57

57 Look for a place Inspection Rope CRA4803-A Search by Category It is to look for various facilities from the genre tab Can you. And narrowed that genre tab Cars and transportation Buy Life Stay-play Eat • • • • • One Press (menu), destination - genre I want to touch on Two standing to the genre of the tab Filter Is the earth, further narrow genre It will touch on Three Touch to select a search method You look around the vehicle / I look around And Ken facilities around the vehicle position You search. Cursor position around (Map scroll only)

Facilities around the cursor position You find the. Area designation Search and narrow down the area You can. Line order (Car-transportation only) Narrow down by route search You can. Memo Search method that is displayed, depending on the chosen genre It will differ Te. • Four It will touch on the purpose of the facility ▼ Facility near the map and shortcut menu New appears. Subsequent operations, shortcut menu Operation of (→ P38) Please reference to. Look for the surrounding facilities Such as gasoline stations and restaurants, current Earth and root around, scroll to the periphery of the facility And you can find up to 50 items maximum. Memo Shortcut menu (→ P38) Of peripheral facilities Find the set also can be operated by touching the You. • One Press (menu), destination - surrounding facilities it will touch on Two It will touch on the genre Page 58

58

Look for a place CRA4803-A Three If there is more information genre, Refine the genre Four It will touch on the purpose of the facility The vehicle around Find the facilities of the area surrounding the vehicle You. Route neighborhood (During route guidance only) Facilities of root around in guidance Find the set. Memo If you operate from the scroll position, and Jikurumashu Side and Route neighborhood does not appear. Parking, ATM, convenience store, gas station, Search family restaurants, fast food Then, it is taken into account business hours, currently available Facility (example: ) And is not available facility (example: ) Are ward It appears to have been another. (Taking into account business hours Search) Biweekly regular holiday, occasional holidays and occasional sales It does not correspond to the time. The time of actual sales There are times when it is different from the between. In convenience stores, liquor ( ) And tobacco ( It deals with) It appears as seen shops. In fast food, drive-through and ( ) Correspondence It appears to be seen is shop. ,,, It does not appear some facilities More Ri you. Parking, "Setting the vehicle information." (→ P113) "Chu It is searched by considering the car limit ". Use can Na

Opinion parking ( ) And it will be displayed. (Actual vehicle There is a setting and a different case) And Ken a department store alliance parking More Select parking You can also search. When in the route guidance is the vehicle is on the route, Search in favor of the route around. Around the vehicle If you are looking for in the area around the vehicle and then touch. • • • • • • • • • If you look at the root around the route forward in guidance Within both sides about 200 m, range of within front about 30 km It is retrieved from the circumference. Own car around or scroll If you are looking for at Le position, the vehicle position or scroll Search Salema from a radius of about 10 km in the range of le position Vinegar. Find a facility within a radius of about 10 km If it did not, and Ken from the scope of the radius of about 30 km It will be search. • Five It will touch on the facility name ▼ map and short with a focus on facilities that chose Cut menu appears. The logo of the facility was searched, map It appears in the above. Subsequent operations, shortcut menu Operation of (→ P38) Please reference to. To cancel the display of the logo One P57 of the "Find peripheral facilities" Procedure

Two In result erasing it will touch on ▼ Logo will be erased. Memo View - erasing around the search results you can either touch, The logo also OFF the car engine switch You can erase the mark. • Page 59

59 Look for a place Inspection Rope CRA4803-A Look for the phone number You may search by entering the phone number of the destination Can you. One Press (menu), destination - phone number I want to touch on Two Enter the phone number ▼ Automatically search and the phone number to all the digits input Me begin. You do not automatically start the search If, input end it will touch on. Memo Please be sure to enter the area code and the city code. You can enter up to 10 digits (090,080,070, Phone numbers that start with 050 and can enter up to 11 digits Masu). Dial Q2 (0990- ○○), mobile phone, shortening Dial, it is not eligible. However, the corresponding power If the telephone number is registered in the registered point detection You can search. • • • ▼

The corresponding map and shortcut menu There will be displayed. Subsequent operations, shortcut menu Operation of (→ P38) Please reference to. Look for from the registration area It is possible to search the list of the registered location You. One Press (menu), destination - registered land touch the Two You want to touch the desired location Memo Sort When you touch, the following pop-Up menu appears. Li Touch You can sort the list. Call chronological order by date and time of registration or call Arranged you instead of the. Close order Vehicle position or scroll area Sort in order of proximity from the point. 2D mark the order I sort by mark. • ▼ Map and show with a focus on registration location you chose To cut menu appears. Subsequent operations, shortcut menu Operation of (→ P38) Please reference to. Page 60

Sixty Look for a place CRA4803-A Look for from the search history Where it is a place or a destination that has been searched in the past, Map or display the facilities during highway mode You can look et al.

One Press (menu), destination - Search history I want to touch on Two Touch the purpose of the facility (history name) Make ▼ map and short with a focus on the chosen location Cut menu appears. Subsequent operations, shortcut menu Operation of (→ P38) Please reference to. Look for from map code By entering the map code, the point You can call quickly. Memo Map code, Japan various locations of place 13-digit maximum the location data (extended map code of place It is intended to identify a number of the case). Address in such as A difficult place even map the code to be identified It can be identified. • One Press (menu), destination - map code I want to touch on Two Enter the map code ▼ Start automatically search If you enter a 13 digit Tighten. If you do not want to start automatically search The input end it will touch on. ▼ The corresponding map and shortcut menu There will be displayed. Subsequent operations, shortcut menu Operation of (→ P38) Please reference to. Page 61

61 Look for a place Inspection Rope CRA4803-A Look for an easy destination search In operation from the map screen, narrow down the search item Use the destination menu'm, easily You can find. One Easy destination search on the map screen It will touch on the touch key Two Touch to select a search method Name Look for the name (→ P55) Procedure of Two ~ Four Please reference to. Street address Look for in Address (→ P56) Procedure of Two ~ Three Please reference to. Phone number Look for the phone number (→ P59) Procedure of Two Please reference to. Home Route to the home up to six or In will be searched. Guidance start to When you touch, the route guidance is started The difference is, the screen and the sound depending on the situation

Route guidance is performed. Home Route guidance is terminated when approaching the You. Page 62

62 CRA4803-A One The location using the destination menu Find (→ P55) Two Information I want to touch on Three Confirm the information Phone number / address / name / genre / If you look from the surrounding facilities: Next page It will switch to the next page. Map Map screen is displayed. Transmission Power to the phone number that is registered We will put the story. (→ P179) Go to here The route to the point that displays You search. Memo For more information, facility icon is displayed. Parking Yes: ATM Yes: Sake of handling (convenience store): Of tobacco handling (convenience store): Drive-through (fast food): The above icon, there is also not displayed some facility You. • If you look from the registration area / search history: Map Map screen is displayed. Transmission

Power to the phone number that is registered We will put the story. (→ P179) Go to here The route to the point that displays You search. Look for more information For information on where you locate by using the destination menu, information of the location has been recorded You can view the detailed information only if that. Memo By item of destination menu that you use, vary the contents of the detailed information that can be displayed. • Page 63

63 CRA4803-A Root It will explore the root If you set the search location as the "destination", a route from the current location to the destination It is search, you will see the route guidance start screen. One Location Find (→ P55) Two Go here to touch on Memo When in the vicinity of the destination there is a toll road, and the General Screen is displayed to confirm the road] or [toll road] It might be. Whether either the case Please choose. Congestion consideration route search (→ P69) If is "ON" Performs a route search in consideration of the VICS information You. If you have already been set route, it looked for Place to either stop-off destination to destination or of pop -Up screen appears. Destination standing in When the earth, and to clear the current destination, new purpose

We will explore the root of the earth as a destination. The stop-off Earth When you touch, the destination as it is, look We will explore the route stop by location. • • • ▼ Route guidance start screen appears. Root professional Feel During the period from the starting point to the destination Road names and section distance passing through to, Rates of toll road (toll road The case where it is used) and pass the preIn the confirmation information such as virtual time Can you. (→ P65) Detailed route setting stop-off location specified (→ P66) , Getting on and off IC specified (→ P67) , The departure point finger Constant (→ P68) I can. Other routes (Search route In the case of multiple) And routes that are currently selected The root of the different search conditions You can choose. (→ P65) Route map (Search route In the case of only one book) Specify the like stop-off place, and sag Search route is only one book In the case of, the entire route is one image It is displayed so as to fit the surface

Will. (→ P66) In the route map screen, Map Scroll of (→ P40) Be between Kale change (→ P41) It is You. Guidance start Plan a route that is currently selected It will start the internal. Memo By starting the traveling, be initiated guidance I can also. The route is first displayed, the "root search criteria" (→ P103) , "Toll road use conditions" (→ P103) Of It becomes route in accordance with the search conditions. If you specify a stop-off areas and getting on and off IC, it is searched Route will be only one. • • • Page 64

64 It will explore the root CRA4803-A Route guidance start screen of seeing how Memo Route guidance start screen, North-up (→ P43) It becomes. Congestion information (→ P89) The if is obtained, displays the time required in consideration of the traffic jam. Rates classification and rates display,

"Setting the vehicle information" (→ P113) Fee of "toll segment" that has been set by the It is displayed in gold. Charges that are displayed, not in response to the various ETC discounted rates and Metropolitan Expressway and Hanshin fast ETC car fee. However, if you are connected to the Navi linkage ETC system of dealer installed option on this machine, discount fee in voice There is that gold is guided. (→ P72) If the route, including the fee non-compliant routes, or is displayed as "more than hundred yen", " ***** This is displayed as a circle. " There is a door. If the toll road facilities such as service area was a destination, it may fee does not appear. • • • • • • Menu display IC (Interchange) Display And the first IC of the toll road to be used Last IC is displayed. Search conditions The root of the currently selected Search criteria are displayed. (Distance) Of route that is selected The total distance is displayed. (Time) Function Settings The setting was estimated arrival time It calculated the speed to the original The required time is displayed You. (Fee) Of the toll road to be used It is the rate classification and rates

It is. (→ P101) Route display A route that is currently selected It is schematic representation. Page 65

65 It will explore the root Root CRA4803-A Check the route profile Make One Route profile and touch and (→ P63) Two Guidance start or return to touch Make Memo Root Edit menu (→ P78) In operation from, Guidance start rather than the end will be displayed. • Choose the other route One Other route I want to touch on (→ P63) Two 1 ~ 6 to select the route with a number of Guidance start I want to touch on Map scroll scroll confirmation screen (→ P65) Scale change and the map of risk in Roll you can. Memo It can be selected from a maximum of six candidates route Be (sometimes candidate route will be the same). Search conditions of the route that is currently selected on the screen It will be displayed.

Recommended route is necessarily route the shortest time I do not mean that. Fuel consumption set (→ P186) If you are, and root exploration Most fuel consumption less Lou from the search results And at the eco route ( This to be displayed as) You bet you can. • • • • Operation of scroll confirmation screen In the scroll confirmation screen, and scroll the map Le (→ P40) Scale changes and (→ P41) In There Can you. In addition, candidate switching each time you touch, and Lou Bets switched, guidance start when you touch the Start the guided in the chosen route. Page 66

66 It will explore the root CRA4803-A You want to view the route map One Route map I want to touch on (→ P63) Two Guidance start or return to touch Make In the route map screen, the scroll of the map (→ P40) Scale changes and (→ P41) It is

You. I a detailed route setting You want to add a stop-off place Add the ground stop-off on the route, and through the stop-off areas You can be guided Yukari route. Memo If you already have a route in assistance, short Cut menu (→ P38) In go here standing in When the blood or of to do stop-off destination to destination Pop-up menu appears. The stop-off Ground Touch, be added to land the stop-off Can you. When you make an additional stop-off place, already passed in that time All stop-off place will be automatically deleted. • • One Details Routing - stop-off location specified Touch to (→ P63) Two Additional touch the Three Looking for a location (→ P55) stop-off place Are decided, determined to touch the Memo It will specify the order in which stop by. You can also rearrange the order later. • • Four Search start I want to touch on Page 67

67 It will explore the root Root CRA4803-A Add to In addition it will add a stop-off place.

Delete It will remove the stop-off place. Sorting Auto The total distance of the entire route is shorter Arranged you changed as. Sorting Manual The exchange arranged by specifying the order in which the stop by For example you. Memo In addition, when you add a stop-off place, the procedure Two ~ Three Of It will repeat the operation. Stop-off areas can be specified up to five locations You. It specifies the boarding IC (→ P67) In the the point rearranging I do not care. • • • ▼ One route to stop by the specified stop-off place It is searched only, guidance start screen (→ P63) There Since it appears, guidance start to touch on To you. Getting on and off the IC (interchange) Designate If you set a route that use the toll road, Specify the interchange of inlet and outlet Thing I can. Memo Interchange that can be specified, the first search It has been the first entrance of the route, the last exit also,

Selected from a total of seven facilities around 3 facilities of the inlet / outlet You can be-choice. Using multiple toll road If the route to use, the middle of the interchange It can not be changed. If you do add or remove sorting and stop-off areas, The specified boarding IC will be canceled. place the smart IC consideration route search is functioning If is, it specifies the smart IC as getting on and off IC child And I can also. → "route that takes into account the smart IC Search " (P69) • • • One Details Routing - getting on and off IC specified Touch to (→ P63) Two Entrance IC designated or exit IC specified It will touch on Three Inter is the entrance or exit It will touch on the change ▼ route through the specified interchange There will be search. Memo If you select the junction (JCT), branch destination Yu Interchange list of fee road is displayed You. • Page 68

68 It will explore the root CRA4803-A To release the passenger IC specified One P67 of procedure Two

In specified release in Touch Two The inlet and outlet / inlet only / exit Only touch the Three Yes I want to touch on ▼ Release the boarding IC specified, the route is search of Will. It will specify the place of departure to explore the route from the specified starting point I can. One Details Routing - specifies the starting point Touch to (→ P63) Two Looking for a location (→ P55) departure Are decided, determined to touch the ▼ The probe route the specified location was the starting point is It will be search. To cancel the point of departure is One P68 of the "to specify a starting point." Procedure One In place of departure specified release in Touch Two Yes I want to touch on ▼ By releasing the starting point specified, the route is search of Will. Page 69

69 It will explore the root Root CRA4803-A For route search function

Learning route search Departure, stop-off areas, road frequently used in the vicinity of the destination Make the route search in consideration of. Memo Learning route search I can ON / OFF. → "function You want to configure. " (P101) It does not have the ability to display the learned routes. the learned road is not necessarily always be used. and changes when frequently used road was gone If such as you, to erase the learning route (→ P87) Please let me learn a new route from the city. However, all of the routes learned to be erased Please note that There will be erased. • • • • Route search considering the smart IC The smart IC is, ETC dedicated to simple Inter I will say that of change. Smart IC Considering the route search is set to "ON" If you, the smart IC as a target of getting on and off IC We will do the route search. Memo Smart IC consideration route search, can be ON / OFF You. → "function to the setting" (P101) If you already have a route in assistance, configuration changes You ca n't. If the smart IC there are business hours, operating at the time We will do the route search in consideration between. Smart Hours of DOO IC, time constraints (→ P69) Similar to It will be taken into account. Smart IC is closed on account of the facility administrator There is a case. Pair in this case route guidance

The No not available in fact, be made with elephant Please note that in QUICK SETUP (→ P15) ETC mounted state setting of In, when it is set to "are attached to the car" is Automatically smart IC consideration route search settings It will be "ON". • • • • • Route search considering the traffic jam information (Congestion consideration route search) FM multiplex broadcasting (→ P89) The traffic regulation information by Make the route search in consideration of. Memo Congestion consideration route search, I can ON / OFF. → "function to the setting" (P101) When congestion information can not be obtained, and congestion consideration Lou You can not DOO search. When necessarily become the root to avoid actual congestion It does not necessarily mean. • • • Route search in consideration of the time regulation The probe route taking into account the regional and time of traffic regulation We will do the search. Memo Depending on the destination, the time constraints consideration route search A result, it might not be able to search. In that case The message appears, Mu either ignore the regulation You can choose whether or not to view. Time regulation considered in the conditionally of time and day of the week, month and day If you perform a route search, based on the search start time

It will consider. • • Page 70

70 CRA4803-A Root induction and Information We'll explain about the display and voice guidance during route guidance. You are here screen during route guidance Memo Root in guidance, general road is toll road in green will be road-painted in blue. In addition, near the starting point, and stop-off Near the ground, near the destination is searched to narrow streets, narrow streets are displayed in pink. Depending on the location Michinuri In some cases, it is not Risa. The estimated arrival time, "Function to set" (→ P101) estimated arrival time speed in set will be reflected. And It will also be taken into account VICS information. Time that is displayed is different from the last actual arrival time at guess time. Display of distance and estimated arrival time to the destination, "Ability to set" (→ P101) "Way, estimated arrival time display" of The By a "stop-off areas" can be changed to display the distance and estimated arrival time up to the stop-off areas. The route information, direction and intersection names turn and the distance to the next guide land is appear Vinegar. Also, it is further display the direction in which the bend to the distance to the guide land beyond the upper. By intersection, It may intersection name is displayed as "guided land". Route information, you can slide operation. → "Root Information Operations" (P77) To approach the guide land (general road: about 700 m, toll road: about 2 km) and, in the intersection guidance display of the next guide land Leh Down information, it will be displayed direction sign (in the general road driving). It does not appear in no intersection of information. Information display, lane during the induction will be displayed in green. arrow of white induction lanes to green passage is recommended

It appears in the mark. Lane information display in the toll road running will be displayed in blue. For route search, "Considerations about the root" (→ P216) Please reference to. • • • • • • • • Route Information Direction signboard display Root in guidance And the distance to the destination Expected time of arrival Lane information Page 71

71 Root CRA4803-A As we approach the guide land Before about 300 of the guide land m (simple guide When it approaches the 500 m), the intersection guidance display Is switched to the screen, the direction of turn display Will. Arrow guide (factory settings) Enlarged view Memo Intersection guidance display, change of Arrow Guide / enlarged view Further I can. → "function to the setting" (P101) In the "Arrow Guide", and information on the intersection of the guide target If there is a broadcast, you will see the signal mark. Also, if there is information for the next guide land, screen It appears in the section.

Intersection guidance display, to display the AV source screen might also be an interrupt displayed in a state where there You. Intersection guidance display interrupt table to the AV source screen It shows I can be ON / OFF. → "function to the setting" (P101) During the intersection guidance display, The Touch but are displayed With that, you can turn off the intersection guidance. Again, If you want to display the intersection guidance Touch to To you. • • • • • When operating in the slide: Intersection guidance display, the display by the slide operation It can be switched. Slide For instructions, "Slide operation" (→ P22) Please visit. → slide It will release a guidance display. ↓ slide It will display the following information areas. Illustration display of the guide land If there is a side road to become three-dimensional cross in the traveling direction And, the data intersection illustration is recorded If you are, the three-dimensional instead of the intersection guide map Manner drawn illustrations will be displayed. Intersection illustrations Crossing illustrations Root induction and Information Page 72

72 CRA4803-A

As you approach the entrance of the city highway About in front of the city highway entrance on the route When approaching the 300 m, illustrations will be displayed. Memo In some urban expressway entrance, illustrations display It may not be. If there is a guide point just before the city fast entrance Might illustrations may not appear. • • When close to the branch of the toll road In front of about 2 km of toll road branch on the route When approached, the traveling direction of the district name of the root Displays. Memo If the data is not recorded by the point, It does not appear. • Also, in front of the branch in the city high-speed, inter-city high-speed When approached to about 1 km, illustrations appear Vinegar. Some places is set to the actual branch point Rear it has the image of a direction sign, which is location You may Lumpur illustrations are displayed. Memo Na are illustrations data is recorded by a point If the stomach, it does not appear. • Tollgate of the entrance and exit of the toll road When approaching the The Navi conjunction of dealer installed option on this machine Have connected to the ETC system, and of ETC If the information is received, and use of the ETC Propriety and the fee will be the voice guidance. In addition, fee For money I will also message display. Memo ETC charges display, the table only if the present location screen It is shown. About ETC lane guide display function (→ P53) Please visit. •

• To pass through the exit and toll of toll road Then And pass through the toll road exit and toll on the route After if there is a branch information, the traveling direction indicated To illustrations are displayed. Memo Na are illustrations data is recorded by a point If the stomach, it does not appear. • Root induction and Information Page 73

73 Root CRA4803-A When close to the narrow street guidance Is road painted on narrow streets (pink on the route In was to approach the road), messages and voice It is guided. Memo The message in the narrow streets running, it will continue to display. Starting the route traveling from within the narrow streets, or fine If the engine ON / OFF in the streets, and voice Information will not be performed. However, the message table It is shown. Narrow street guide I can ON / OFF. → "function setting I will be a " (P101) • • • The guiding and guidance by voice During route running, the speed of the situation and driving a car In response, it is done meticulously voice guidance. Direction guiding Traveling direction (8 directions), as follows: a voice It is guided. Diagonal right direction It is.

Diagonal left direction It is. It is the right direction. It is straight. Diagonal right front Is the direction. It is a U-turn. It is the left direction. Diagonal left front Is the direction. Type Guiding example Side directions Approximately ○○ m away, side road The is the left direction. Toll road entrance-exit guide approximately ○○ m destination, left Direction, is the entrance. Toll road toll guidance about ○○ km away, fee It is the place. ETC fee guidance Prices, was ○○ circle. ETC usage fee is ○○ circle It has been discounted. Smart IC guidance Beyond, in the smart IC Vinegar. The actual signs Please proceed thus. Lane guidance Approximately ○○ m away, right It is over there. Right turn lane There. Rates guidance Rates are ○○ circle. Signal just guiding this signal is left. Memo Well the plan is only guidance, such as the right direction and left direction In a point that can not be inside, to be traveling lane Also it will guide you like. Direction of right or left turn induced the actual road form of Jo and it may not fit.

To take advantage of the ETC information guidance functions of this machine, the present Come to the Navi conjunction of dealer-fitted option ETC Shea You need to connect a stem. ETC information guide, the information from the information providing facility More, the guide is done. Traffic lights just assistance, the fee guided by the ON / OFF Can you. → "function to the setting" (P101) • • • • • Root induction and Information Page 74

74 CRA4803-A Guidance at the time of the general road driving In conjunction with the speed of the car, up to four times in front of the intersection, the voice guidance will flow. In addition, in the timing Together intersection guidance is displayed. Memo You can to simplify the number and content of the voice guidance. → "function to the setting" (P101) • Normal time Approximately 300m away, It is the right direction. As above, in ○○ m, It is the left direction. Second time The guide point is continuously When you are Approximately 700m away, It is the right direction. There is a right turn lane. First

Soon, It is the right direction. As above, in ○○ m, It is the left direction. It is right. Third time 4th It is left. Subsequently, It is the left direction. It is about 3km away right direction. Simple guide when Approximately 500m away, It is the right direction. First The guide point is continuously When you are It will soon make a right direction. It is right. Second time Third time It is left. Subsequently, It is the left direction. It is about 3km away right direction. When approaching the stop-off place When approached to about 300 m in front of the stop-off place, "is soon stop-off point." Said the voice guidance will flow. Root induction and Information Page 75

75 Root CRA4803-A Guidance at the time of toll road running In conjunction with the running of the car, branches and outlets, up to three times in front of the toll, the voice guidance will flow. In addition, the District name and branch illustrations at the timing (→ P72) Such as will appear. About 2km away

It is a toll booth. First It will soon make a tollgate. The cost is ○○ circle. Third time Approximately 1km away It is a toll booth. Second time Memo Rates displayed, by the vehicle information setting, midsize car, ordinary car, will be switched to a light car. → "Setting the vehicle information Yes " (P113) The fee assistance, rates from the entrance you set the route before entering the toll road to the exit will be guided. Toll If you set a route since the beginning of the road, or fee guidance is real and different, and that the fee is not guided I have. Charges that are displayed, not in response to the various ETC discounted rates. However, the dealer installed option on this machine If you are connected to the navigation interlocking ETC system, you may be guided discount rates for voice. (→ P72) • • • Root induction and Information Page 76

76 CRA4803-A Operations and functions in the route guidance Operations that can be performed while route guidance, we'll explain the various functions. Self when you are out from the root Dynamically to re-explore the route If you have deviated from the route in assistance, automatically Re-searching the route (auto re-route). Memo

Driver intentionally whether out of the route, road The judgment is made as to whether or not inside of a mistake, re-probe all routes Do the search or return route re-search (Intel Li stringent reroute). • The new route, depending on the situation I suggest When a new route is found, "a new candidate Flow route is found, "and voice guidance Is, we propose a new route in accordance with the situation You. Memo If the guide land near or guide land is continuous, the machine There are times when it does not function. New candidate route, required at the time than the original route Or between routes that distance increases, it is presented There is a thing. • • Impassable occurred on the route Case If the closure occurs on the route, Since the closure occurs on the "root, new Will guide you in the root, "said the voice guidance and screen display the difference is, it will be a guide of the new route only. Confirmation Please Touch the (closed to traffic consideration auto Reroute). When operating in the slide: Roadblock guide, it will check the slide operation Thing I can. Method of operation slide Nitsu Information, "Slide operation" (→ P22) The visit Kedah Sai. ↓ slide Check the closure assistance, new It will guide you in the root. Page 77

77 Root

CRA4803-A To guide the traffic jam information on the route Let Congestion and regulatory information of VICS that occurred on the route And it can be guided by the distribution maps and audio You. Memo It will not work, such as when the VICS information can not be obtained There is a thing. In the speech, for example, "approximately 3 km away, 1 km of the congestion But it will have occurred. About 5 minutes to pass takes or Vinegar. "And it will be guided. • • Congestion auto guide Automatically sounds the congestion information that was generated on the route It will guide you in the voice. Memo Congestion auto guide, I can ON / OFF. → "machine To the function setting "(P101) If the root in the guidance does not exist, the guide Salema To do. • • Congestion check Congestion When you touch, can be generated on the route Check the congestion information that are in the map display and voice guidance You can be. ▼ Memo Congestion Each time you touch, of up to 5 locations destination You can be guided in order to information. If the root in guidance is not, and regulation of the area surrounding the vehicle Only it will display and guide the information. • • Route Information Operation of The sliding operation of the route information Then, you can view the following information areas, the guide table

You can cancel the shows. Slide For information about how to operate, "Slide operation" (→ P22) Please visit. Route Information → slide It will release a guidance display. ↓ slide It will display the following information areas. Memo If you want to redisplay the guidance display, Standing in You Ji. • Operations and functions in the route guidance Page 78

78 CRA4803-A One Press the (menu), root ed Collection touch the ▼ Edit menu screen of the route will be displayed. Root erasing to clear the route in guidance I can. (→ P79) Root professional Feel confirming the set route I can. (→ P78) Detailed route Setting Such as stop-off land of add, and detail the route You can set in. (→ P78) The stop-off areas Feed 必you stop by registered stop-off place such as when required is gone, and the stop-off

As already passed through the earth, the root You can re-search. (→ P79) Demonstration run Route from the starting point to destination It was allowed to pseudo-run, and verify the route You can. (→ P79) Check the route profile Make Operation method, "To explore the root" - "Root Check in profile "(→ P65) Similar to It is. Re-probe the route by changing the conditions To search And changing the search conditions of the route in guidance temporarily Te, it will be able to re-search. However, Pass pre-stop-off land, and re-explore the route It does not take into account also. "Stop-off area designation", "getting on and off IC designation", "starting point finger Method of operation of the constant "is, "To explore the root" - "more To fine Routing "(→ P66) This is the same as for. One Details Routing - route again Search it touches the Edit a route Check the set route, a stop-off areas and the departure point, you can specify things such as getting on and off IC, Lou You can edit the door. Memo Route check and stop-off areas and the departure point of the route profile, the designation of getting on and off IC, route guidance start screen (→ P63) You can do even. •

Page 79

79 Root CRA4803-A Two Change the search conditions search Start I want to touch on Memo Change of the search condition is temporary, function Setting (→ P101) It will not be reflected in the. • You want to clear the route One Root erasing it will touch on (→ P78) Two Yes I want to touch on ▼ Route will be erased. Memo It is not possible to undo the Erase route. • Postpone the stop-off place One Stop-off place Feed touch the (→ P78) ▼ In already passed through the next stop-off location, route It is searched. Check in the demonstration run One Demonstration run I want to touch on (→ P78) ▼ Memo During the demonstration run is, on the right side of the screen during the demonstration is displayed You. When you touch, the confirmation of the demo running end message

Message appears. If you want to end Yes It will touch on. During the demonstration run, the root Edit menu (→ P78) The demonstration run end appears. Touch You can end the demonstration run with. Demonstration run is repeatedly performed until to the end You. • • • Edit a route Page 80

80 CRA4803-A You want to clear the route If you want to cancel the route guidance and clear the route that you have set. Memo You can also be erased from the root Edit menu. (→ P78) • One Press (menu), root consumption is removed by touching the Two Yes I want to touch on ▼ Root in guidance will be erased. Memo It is not possible to undo the Erase route. • Page 81

81 Registration and editing operation CRA4803-A You want to register the location You can register in advance want to place that in mind, such as a home or friend's home, Misao, such as Routing Work easier.

Memo You can register up to 1 001 points, including the home. You can save the registered location information to the SD card, the data of the registered location from the SD card, you can read into this machine You can be. → "migrate the registered location" (P85) Registered location names and marks it will be able to change. → "edit the contents registered in the registration area." (P83) • • • You want to register the location Register the place visited by Looking place and drive If you leave, I watched the next time you go there You can explore the route to do. In addition, automatically sound when approaching to the registered location You can also play the. One Location Find (→ P55) ▼ Shortcut eye on Looking location map New appears. Two To register here to touch on Memo While driving, procedure Two Salema point after the operation registration Vinegar. Procedure Three It does not appear on the screen. • Three Touch to choose how to register Four Input end it will touch on Memo Such as the facility of calling in the genre list Search If you want to register, and data on the telephone number to the facility

If there is, automatically the number is registered. Procedure Four It can be used to change the name to be registered in Vinegar. → "character input operation." (P30) • • Page 82

82 CRA4803-A For registration method to choose Registration method Registration contents In "search facility name" To register "Looking for the location of the facility Name " Sign up for "individual place name." Make "Place name of looking for places" Registered in the "home" "Home" Registered in the "Company" The company I want to register in the "home" "Home" To be registered in the "friend's house" "friend's house" In "Grandpa's house" To register "Grandpa's house." In "Grandma's House" To register "Grandma's House" In the "uncle's house" To register "Uncle's house" In "Aunt's house" To register

"Aunt's house." I want to register in the "countryside" "Countryside" To register in the "hometown" "hometown" It is registered with "her home" "her home" To register in the "boyfriend's house" "boyfriend's house." To register it with a name and a name of your choice It is registered Te Can you. You want to register the location Page 83

83 Registration and editing operation CRA4803-A One Press (menu), set-ed Collection - the navigation data editing and touch Make Two Registered location edit touch the ▼ Of registered land Edit menu screen is displayed You. Edit Edit content that has been set at the time of registration You can be. (→ P83) Erasure It can be used to erase the registered location Vinegar. (→ P84) Erase all It will erase all of the registered location. (→ P84) Registration land transition By setting a password, It has saved the registered location to SD card Ri, registered location data on the SD card Let read the to Navi body Thing I can. (→ P85)

Edit the contents registered in the registration area Make One Edit Touch to (→ P83) Two To the point where you want to edit the registered contents Touch Memo Sort When you touch, the following pop-Up menu appears. Li Touch You can sort the list. Call chronological order by date and time of registration or call Arranged you instead of the. From the vehicle position Close order The exchange arranged in order of proximity from the vehicle position For example you. 2D mark the order I sort by mark. • Three Touch the item you want to change Name And 20 the name you want to change in the full-size Character to (20 characters in single-byte) You can enter Edit a registered location Information about the registered location (name, telephone number, marks, sound effects, position) to change the You can. Page 84

84 CRA4803-A Phone number Enter the phone number. Power If you set the story number, power Search the place from story number It will be able to. Or Was, and if you connect the mobile phone If, pieces of the phone in its place Will.

2D mark Registration area, which is displayed on the map It will change the 2D mark. Sound effect The ringing when it approached the registration area You can set the lath sound effects. Position correction It will correct the position of the registration area. Four End it will touch on ▼ It will return to the map screen. The name of the registered location on the map To display 2D mark on the list If you select the mark, Even on the map the name of the registered location in addition to the mark It appears in the (private mapping). ▼ Private mapping Sound sound effects how From the setting of the sound effect has been registered location is the vehicle Effect sounds and approaches within about 500 m You. Registration area is more than from the vehicle within about 500 m In some cases, the effect sounds from close You. Or once the sound effect is heard, after 30 minutes That it is not cycled the power of the machine (engine It is not re over and) sound effect does not sound. Than the registered location sound effects, route, and the VICS Voice guidance takes precedence. Erase the registered location One Clear Touch to (→ P83) Memo Erase All When you touch, P85 Procedure Four The confirmation screen

View and erase all the registered land the plane. • Two Touch the registered location you want to erase ▼ In the selected registered location, and (check mark) It is attached is, you can choose continue. Select All All of the registered location is selected. CANCEL The registration land all that has been selected To release. • • • • Edit a registered location Page 85

85 Registration and editing operation CRA4803-A Memo Sort When you touch, the following pop-Up menu appears. Difference Touch Ido menu appears. Call date and time the order of sorting the list to call chronological order You. From the vehicle position Close order In order to close the list from the vehicle position Sort. 2D mark the order I sort by type of mark. • Three Erasing I will touch on ▼ A confirmation message is displayed. Four Yes I want to touch on ▼

Registration area will be erased. Migrate the registered location One Registered land transition it will touch on (→ P83) ▼ Registered location migration menu screen is displayed. Save memory Card The SD registered land that was registered on the machine It will save the card. (→ P85) Read menu Molly Card Tow and stored on the SD card It will not read the recording area to the unit. (→ P86) Password Setting Save of registration land, used at the time of reading You set a password to use. (→ P85) Password Initialization the set password is initialized You. (→ P86) Set a password To do save and read of registered land, the path Word setting is required. One Password setting touch the (→ P85) Two Enter the password input end It will touch on Memo You can enter a password, up to 4-digit half-width number It is. • ▼

For confirmation again, the password entry screen It will be displayed. Three Procedure Two Password you enter in Enter the input end to touch Make ▼ Password is set. You want to save the registered location One Save memory card to be touch That (→ P85) Two Enter the password input end It will touch on Edit a registered location Page 86

86 CRA4803-A Three Yes I want to touch on ▼ It will save the registration area to the SD card. Memo Already registered location is stored in the SD card If Yes it is registered on the machine when you touch the You'll Save the registration areas that are. Cancellation If no Please Touch. Save collectively the registration area, home of the data of all matter content In it will save. Registered location you want to save to SD card, access date and time It will save in the order. • • • During the registration area to save it, or the power of the machine to OFF, Please do not remove the SD card. •

Read the registration area One Read memory card standing in Chisuru (→ P85) Two Enter the password input end It will touch on Three Yes I want to touch on ▼ You will read the registration area. Memo If you already registered location is stored in the machine Yes it is registered in the SD card when you touch the You'll Save the registration areas that are. Cancellation If no Please Touch. If you normally read has been made to this equipment, SD Registered location of the card will be erased. The registered land matter of this unit while reading from the SD card If the number has reached the maximum number of registerable, its effect To display the message, more reading row No. • • • During the registration area reading is, the power of the machine is turned OFF Or, please do not remove the SD card. • Initialize the password One Password initialization touch the (→ P85) Two Yes I want to touch on ▼ Password is initialized. Memo When performing the initialization of the password at the same time the All aircraft registered destinations will be erased. To initialize That case, to save the registration area in advance to the SD card (→

P85) It is recommended that you. • Edit a registered location Page 87

87 Registration and editing operation CRA4803-A You want to clear the search history If you find a place, where you were looking for automatically detected It will be stored until the 300 cases as search history You. It is possible to clear the search history in the next step You. One Press (menu), set-ed Collection - the navigation data editing and touch Make Two Search history erasing it will touch on Three Touch the search history you want to erase Make ▼ In the selected search history, and (check mark) It is attached is, you can choose continue. All selection all search history will be selected. Full release search history all that has been selected To release. Or you want to release inspection You can release even choose search history. Four Erasing I will touch on ▼ A confirmation message is displayed. Five Yes I want to touch on ▼ The selected search history is cleared. Erase the learning contents of the root Make

This unit, has been learning the road to be used well, Preferentially use the road that has been learned during the route search To you. → "learning route search" (P69) such as when you change the way better to use, and learn Do the re-learning to erase the route. Memo Since all of the learning route will be erased your Note Please attention. • One Press (menu), set-ed Collection - the navigation data editing and touch Make Two Learning route erasing I will touch on ▼ A confirmation message is displayed. Three Yes I want to touch on ▼ Learning route will be erased. You want to edit other data You can erase the data of the various functions that are stored in the machine. Page 88

88 CRA4803-A It wants to erase the traveling locus It erases the running locus are displayed on the map screen Thing I can. Memo It can also be automatically erase the traveling locus Vinegar. → "function to the setting" (P101) • One Press (menu), set-ed Collection - the navigation data editing and touch Make

Two Traveling locus erasing I will touch on ▼ A confirmation message is displayed. Three Yes I want to touch on ▼ Travel track will be erased. You want to edit other data Page 89

89 CRA4803-A Use of various types of information Use the FM-VICS information It receives the FM-VICS information (provided from the VICS Center) in the vehiclemounted antenna, congestion information You can check, etc. and regulatory information. The VICS information VICS (V ehicle I nformation & Communication System: road traffic The information communication system), the latest traffic information Communication system for communicating to the driver It is. Upon receiving the VICS information, congestion and accidents, traffic The land of navigation for the latest information, such as the regulation You can be displayed on the diagram. In addition, simple ground It can also be seen in FIG illustrations and character. Display form of VICS information The VICS information, from Level 1 Level 3 or There are three types of display mode in. Dry Bar is provided from the VICS center, next You can take advantage of a road traffic information such as. ● traffic congestion information (including favorable information) ● travel time information ● traffic failure information ● traffic control information ● parking information Level 3: Map Road traffic information to navigation on the map It will be displayed directly. Level 2: Simple graphic Road traffic information in such a simple map illustrations

Broadcast will appear. Level 1: Character Road traffic information is displayed in character. Memo By the information provider side of the problem, garbled and the net Error message is displayed, such as a work disorder It might be. • Page 90

Ninety Use the FM-VICS information CRA4803-A See VICS information on the map In the display mode of the level 3 (map), the road traffic information received from the VICS center, road congestion It will be displayed on the map in the paint and VICS information mark. Display on the toll road Congestion Blue border in red Congestion Blue border to orange Favorable Blue border on bright blue Regulation interval display Yellow to black edging Inlet closing, closed to traffic black Display to the general road Congestion White border in red Congestion White border to orange Favorable White edging in bright blue Black edging to regulation interval display yellow Road closed Black Memo The power of the camera to ON VICS information received from you (the engine ON) to is displayed, the time it takes There is a thing.

When the broadcast of the area you want can not be received, please switch the broadcasting stations. → "select the station." (P93) VICS information provision time display is the time at which the most recent data has been provided. Congestion When you touch, not during the route guidance information of congestion and regulation of root on the front, under route guidance place If you inform the regulatory information regarding the vicinity of the vehicle in the map display and text information and voice guidance. (→ P91) • • • • Providing VICS level 3 information Time display F The VICS information provision time by FM multiplex broadcasting State of less than 5 minutes after receiving the information orange Less than 30 minutes after 5 minutes or more from the reception of the blue information state the -: - It does not receive the information, or after receiving 30 minutes Elapsed state (at the start of reception, or information more Place but a lapse of 30 minutes or more is no longer able to receive If, VICS information is erased. ) Page 91

91 Use the FM-VICS information Use of various types of information CRA4803-A Kind of VICS mark The VICS information, mark, such as the following also map It appears in the above. Large closures Disabled car Work Street disorder Chain regulation

Freeze Wrong way Entrance limit Closed to traffic, closed Accident Under construction Inlet closing One side alternating traffic Face-to-face way Lane regulation Crawl Speed limit (number speed limit) Event Weather Fire Disaster No cause Parking closed Parking (free: blue, congestion: orange, full car: red, unknown: black) The contents of the "VICS level 3 information provision time display" Table VICS information provision time by FM multiplex broadcasting It is shown. When it takes a long time to display the offer time We're going to check the reception sensitivity of the broadcast station being received Sai. → "select the station." (P93) The traveling the area where two broadcasting areas overlap When it is the This machine, VICS information (road painted information around You are here Broadcast) and another area (such as neighboring prefectures) It is possible to display VICS information at the same time You. Thus, the broadcasting areas such as border Even if you are traveling the region overlapping and view information needed Rukoto I can. Automatic display of emergency information When receiving the emergency information, automatically them Contents will be displayed. To guide the traffic jam information on the route Let Congestion and regulatory information of VICS that occurred on the route

It is used to guide the distribution in character display or voice Can you. Memo It does not work, such as when the VICS information can not be obtained Connections may not. In the speech, for example, "approximately 3 km away, 1 km of the congestion But it will have occurred. About 5 minutes to pass takes or Vinegar. "And it will be guided. • • Congestion auto guide Automatically sounds the congestion information that was generated on the route It will guide you in the voice. Memo Congestion auto guide, I can ON / OFF. → "machine It makes the function settings " (P101) If the root in the guidance does not exist, the guide Salema To do. • • Congestion check Congestion When you touch, can be generated on the route traffic information map display and text information and who are It can be confirmed by voice guidance. ▼ Page 92

92 Use the FM-VICS information CRA4803-A Memo Congestion Each time you touch, the astringency of up to five locations destination To the place residence you can be guided by the order. If the root in guidance is not, and regulation of the area surrounding the vehicle Only it will display and guide the information. • • The characters and graphics information of VICS To see

To display the VICS information of the characters and figures I can. One (Menu) Press, information on Touch Two Congestion information I want to touch on Three Touch the information you want to display Graphic information Level wide area information of 2 (simple shapes) It will display boric. Character information Wide-area information of level 1 (letter) Displays. Center information and table information from the VICS Center It shows you. Four Touch the number of the look you want information The information number displayed on the menu INTRODUCTION choose the number. Such as congestion and traffic regulations Information is displayed on. ▼ Memo When all of the information screen consists of multiple pages, < , > If you touch, you send the page. Top / final When you touch, the first page / top Final page is displayed. When all the information has not been acquired, and the current The first page of the information that is standing acquisition, or the top Final page is displayed. Table of Contents When you touch, to return to the VICS menu You. Tuning When you touch, the broadcasting stations of FM multiplex broadcasting You can choose. → "select the station." (P93) • • • •

Page 93

93 Use the FM-VICS information Use of various types of information CRA4803-A Select the station When receiving the VICS information from FM multiplex broadcasting Are, you choose a good broadcaster the most receiving sensitivity. One (Menu) Press, information on Touch Two Congestion information I want to touch on Three Broadcasting station selection it will touch on Four Touch the way to find a broadcast station Auto The VICS broadcast stations, depending on the vehicle position It will be automatically selected. List Choose from the broadcast station list. Seek + , - Touch, own frequency We will do the dynamic tuning. Received Toko which receives the signals broadcast stations It will stop in a furnace. For confirmation of the reception state of the broadcast station The congestion information screen, broadcasting station name being received, Zhou Wave number, such as the reception status is displayed. Reception status display Tuning method (Auto / list / seek) Reception status display, if the reception sensitivity is high "High", when the reception sensitivity is low, "Low" It will be displayed. Page 94

94 CRA4803-A

Use the ETC information When you connect the navigation interlocking ETC system of dealer installed option on this machine, ETC car You can look at the registration information of the stored history information and ETC board equipment to the soil, a guide at the time of ETC use Setting of I can. One Press (menu), information ETC I touch the ▼ ETC menu appears. ETC use history to display the usage history of ETC card To you. (→ P94) ETC registration information to display the registration information of the ETC card To you. (→ P94) ETC setting Guidance and warning sound at the time of ETC use You will perform the settings such as. (→ P95) Memo ETC usage history is, ETC card in ETC-board unit There can not be selected has not been inserted. • You want to display the ETC usage history One ETC usage history I want to touch on (→ P94) ▼ Memo Table from the usage history is a new one until the maximum of 100 It is shown. When getting on and off the interchange name is unknown, Appears interchange number. If you display the history in the vicinity of the ETC gate, roadside You may not be able to communicate with the wireless device. • • •

You want to display the ETC registration information One ETC registration information I want to touch on (→ P94) ▼ Page 95

95 Use of various types of information CRA4803-A Do ETC setting One ETC setting touch the (→ P94) Two Touch the item you want to set, ON or OFF touch the ETC interrupt Display When utilizing the ETC, to use The vinegar interrupt display of such fee Performs Rukashi not of settings You. ETC voice guidance when using the ETC, to use You can either voice guidance such as fee We will do some setting not. ACC on time Alarm display The engine switch or LOCK When the Luo ACC, and ETC car Displays such as soil anomaly on the screen Performs Rukashi not of settings You. ACC on time Warning voice guidance The engine switch or LOCK When the Luo ACC, and ETC car And it is guided soil anomaly, and more at voice Performs Rukashi not of settings You. Card Without forgetting

It is warning Whether the engine switch ACC When the Luo LOCK, and ETC Notice the forgetting to pull out of the card It is carried out either by not or set You. Use the ETC information Page 96

96 CRA4803-A Make use of vehicle maintenance If you set the update time, such as time to replace the car of consumables, replacement or renewal You can display a message to let you know that it is approaching. The vehicle maintenance, the following consumables there It has been Luo advance setting. If necessary, by using "any input 1-5 ' You can be arbitrarily set the consumables. Consumable items Engine oil change, oil filter Replacement, tire rotation, tire exchange Conversion, air cleaner, brake pad exchange Conversion, V belts, cooling water (LLC) exchange, Bradenton Fluid on the exchange, ATF exchange, any input 1, Any input 2, any input 3, any input 4, responsibility NOTES input 5 Memo Items of consumable is to set in bulk from the SD I can also. For more information and contact your dealer Please • One Press (menu), information Maintenance you want to touch on ▼ Maintenance menu appears. Item Settings Notice of time to replace the consumables The setting from the travel distance and duration of use You can set.

(→ P96) Advanced Setting Automatic communication announcements of replacement time One of the settings and set not either knowledge It erases all of the constant field contents, all update It will perform the. (→ P97) The exchange time, such as consumables Set One Item setting touch the (→ P96) Two Touch to select the item Memo The check mark in the already items that are Announcement Click marked with. Any input 1-5 When you select the item name of the menu You can be set by manually input. • • Three Announcement distance or notice Day I touch the Example: engine oil exchange Notice distance inform the mileage (km) Sets by entering the. Announcement Date Enter the date to inform Set you. Update Update to the latest setting. Setting clear Is all set to unset state You. Page 97

97 Use of various types of information CRA4803-A ▼

After setting each item, the end or back standing in When you switch step 3 to return to the screen. Memo Update , the notification distance or announcement date is You can choose to be set. Update of announcement date, the day you set the Announcement Date And, the update interval from the date it was scheduled to be announced Decide on a monthly basis, its update interval on the day that you made the update The Sets plus. Example: If you set the notification date after 4 months 1/1 (set date) 6/1 (Updated) 5/1 (Announcement Date) ➡ 10/1 (Announcement Date) • • To Advanced One Advanced I want to touch on (→ P96) Two It is set to select the item Automatic notification settings and your knowledge of the exchange time to the unit startup Setting of whether or not to the racemate That you will perform. Setting Erase All The setting was to inform the timing of items It will erase all. Automatic all update Announcements time has passed item All I will update. Notice confirmation screen It is to date you set the vehicle maintenance And, the power of the machine ON (ON the engine) Then, following announcement of the message There will be displayed. Memo Bulletins are not displayed next to When you touch, it does not appear until the next due date Masu no longer. To display the next time you touch to,

It will be displayed every time until you update to the next due date. To update to the next due date, P96 Procedure Three Screen In update it will touch on. • • Make use of vehicle maintenance Page 98

98 CRA4803-A Find the serial number It is used to check the serial number of the machine You can. One Press (menu), information System information I want to touch on ▼ The serial number is displayed. See the sensor learning situation You can check the learning status of the sensor. One Press (menu), information System information I want to touch on Two Sensor learning situation it will touch on ▼ Sensor learning The current learning state ("3D hybrid mode" Or "in the sensor initial learning") is displayed You. Trip meter / vehicle speed pulse number Current number of trips the unit is aware, pulse The number will be displayed. Memo Trip meter or vehicle speed pulse number standing in To reset the number that has been accumulated when you switch I can.

Sensor learning When you touch, utilize the sensor It can be set. For more information, "Sensor reset About " (→ P213) Please visit. • • Before and after G / tachometer Currently bar strength of the front and rear G that this unit is recognized In, the rotational speed of the left and right will be displayed in fan. Inclinometer The top and bottom of the slope that is recognized by this machine is road It is expressed in the slope. Distance / azimuth / inclination learning level of (3D) With respect to distance and direction (rotation of the left-right direction), tilt, Whether the display of how learning results have been accumulated Will. When the bar reaches the right end, the degree of learning It represents that it is a bur highest. Confirmation of traveling state always passenger performs, driver Please dedicated to driving. • Use of other information You can look at the information on the various functions of this machine, you can use. Page 99

99 Use of various types of information CRA4803-A Memo Learning degree and the trip meter, vehicle speed pulse number Failure of this unit, due to repair, it is clear There is a thing. In addition, depending on the state of the machine, There may not be accumulated. Sensor in a state of un-learning, and other than the number of pulses Display does not have a meaning. Even the power of this unit to the OFF (OFF the engine), Trip meter and the vehicle speed pulse number is integrated You might want. When the inclination (3D) learning level does not appear, vehicle speed Pulse is not properly counted. Car

that fast signal input is not connected correctly I thought you. Please consult your dealer. • • • • You want to check the connection status Each device connection status, and check and signal of state You can. One Press (menu), information System information I want to touch on Two Connection state it will touch on ▼ Memo in from switching the screen Will. Display case and a "measurement impossible" it does not appear correctly If it is, please consult your dealer. • • GPS antenna Of GPS antenna connection status is displayed. When it is properly connected, "OK", it is connected If not it will be displayed as "not connected". Its Antenna of the illustrations that are displayed on the right side of the You can check the reception status of the GPS antenna. 2 in a location with good radio waves received easy to view This more than bar is good if it is displayed. To the right, the current positioning state (three-dimensional positioning The number of / 2-dimensional positioning / Not positioning) and the satellite being received There will be displayed. Satellite mark of orange in the positioning The number of satellites being used, the yellow satellites mark It shows the number of satellites in the capture. Three or more of Mamoru Upon receiving the radio waves of the star can be positioning You are here It will be. For more information about positioning "In GPS Positioning Night " (→ P204)

Please visit. Vehicle speed pulse Currently the number of vehicle speed pulses that the unit is recognized It will be displayed. "0" is displayed when parked It is. When driving the vehicle, in response to the speed Te to the dial tone of "beep", along with the numbers Bar display will change. Confirmation of the vehicle speed pulse, in a safe place, slow Please go (about 5 km / h). Mounting position Installation status is displayed on this unit. A while Please check from traveling. Correctly set When it is location is displayed as "OK". "Vibration out of tolerance" or "mounting angle allowable range 囲外 "and when it is displayed, your dealer Give me. Use of other information Page 100

Hundred CRA4803-A Back signal Connection state of the back signal input is displayed. The shift lever to "R" It will be the position of the (reverse) And the display is put changed over of "HIGH" and "LOW" or Vinegar. Shifutore while stepping on the brake pedal And make sure that you operate the bar, it is displayed correctly Please be. This connection, car forward / reverse It is intended to determine. It is possible to correctly detect the forward and backward that it is not connected ※ Because there may be no, the vehicle position is deviated There is a case. In addition, Bakkumoni optional When connected to ter the shift lever The even when the position of "R" (reverse) and automatic This switching to the back of the video monitor to Door can not. Parking brake Parking brake status is displayed. When the parking brake is being applied "ON", the display "OFF" when it is released

It is. Per while stepping on the brake pedal And operating the parking brake, it displays correctly Please make sure that. Illumination State Illuminator power is displayed. Car of the scan When the mall light is lit and "ON", When you're off it will be displayed as "OFF". Power-supply voltage And it is supplied to the unit from the car battery The power supply voltage is displayed. It is multiplied by the engine Normal if it is in range of 11V~15 V in the state It is. In addition, an error of about ± 0.5 V at most Some reason, this display is a reference value. Bluetooth devices 1-3 Connection with the Bluetooth device (pairing) state There will be displayed. Properly connected (pairing) The device of device connected when it is Path name, BD address, the profile name is displayed Is, Table "No connection" if not connected It is shown. A displayed in the right Container of illustration this unit and Bluetooth device You can check the radio wave strength between. ※ To check the radio wave strength, the Bluetooth setting At a constant, and Wai this unit and Bluetooth device The Yaresu you need to connect. In detail The "Registering a Bluetooth device" (→ P107) Please visit. ETC unit Navi linkage ETC system (dealer installed option Connection state of emissions) is displayed. Always set Please check from up. Correctly contact If it is continued to "OK", it is not installed connected If you have "unconnected", if an error occurs You will receive an error number. Vehicle unit number Navi linkage ETC system (dealer installed option If the emissions) is connected, the vehicle-mounted device management number There will be displayed. Card expiration date Navi linkage ETC system (dealer installed option

Expiration date a table of ETC card inserted into the down) It is shown. Check the data version Map data and search it has been recorded in this unit It is possible to determine the version of the data You. One (Menu) Press, information on Touch Two Data version display standing in Chisuru ▼ The data version is displayed. Three Sure touch the Use of other information Page 101

101 CRA4803-A Setting of navigation Make the function settings By changing the setting in accordance with the application and preferences, and easy to use navigation You can be. Setting items of navigation, it has been classified into the following three menus for each function. • Display map (→ P102) • Route guidance (→ P103) • congestion information (→ P105) One Press (menu), set-ed Collection touch the Two Navigation function setting Touch to Three Touch the item you want to change the settings

Make Memo When you touch the classification tab, squirrel from the beginning of the function It can be used to display the door. • Four I want to touch on the setting ▼ The settings are changed. Still set You can change and select the item. Five If you want to exit the setting, the end to Touch Page 102

102 Make the function settings CRA4803-A Setting details Map display * Is the factory default settings. Auto highway map "ON" * Automatically you want to highway mode. "OFF" Automatically and does not in highway mode. City map "ON" * Street map is displayed. "OFF" It appears normal map. City map boundary display ※1 "ON" It will display the boundaries of the city map on the screen. "OFF" * Without displaying the boundaries of the city map on the screen, you can switch to the normal screen.

Map color switching "Time Integration" Color scheme of the screen will switch at sunset / sunrise time work. "Illuminating linkage" * Color scheme of the screen will switch in the ON / OFF of small lights. "Daytime color fixed" It remains always daytime screen. Traveling locus display "ON" * Travel locus is displayed. "OFF" Traveling locus does not appear. Traveling locus auto-erase "Near home" Turn off the power of this unit at a point within about 100 m from where it was registered at home That it (turn off the engine), the travel locus is erased automatically. "When the power is off." That the travel locus turn off the power of this machine (turn off the engine) is erased automatically You. "OFF" * Traveling locus does not automatically erased. 2D (normal view) fixed scroll "ON" During scrolling, secure the screen to normal view. "OFF" * During scrolling, and does not fix the screen to normal view. Display of current location information "City name" * You are here will be displayed in a city name. "Traveling road name" You are here will be displayed in a traveling road name. (Municipal if there is no street name Village name is displayed. ) "Latitude and longitude"

You are here will be displayed in latitude and longitude. Easy destination button display "ON" * Easy destination search touch key is displayed. "OFF" Easy destination search touch key will not be displayed. ※ 1 This function City map can be set only when "ON". Page 103

103 Make the function settings Setting of navigation CRA4803-A Route guidance * Is the factory default settings. Root search criteria "Recommended" * The number of traffic signals is small, even moderate as easy to route the search amount of right or left turn It is. "Distance priority" Distance in preference are searched route. "Mains priority" The main road in preference route is searched. Toll road use conditions "Standard" * Toll road is the route search with standard criteria. "Avoiding" Route that avoids toll roads is searched. Ferry route use conditions "Standard" * Ferry route is the route search with standard criteria. "Priority" Is the route search the ferry route preferentially. "Avoiding" Route that avoids the ferry route is searched. Learning route search

"ON" * Consider the learned routes. "OFF" It does not consider the learned routes. Congestion consideration route search "ON" * Route in consideration of traffic information will have been searched. "OFF" Congestion information is not taken into account. Smart IC consideration route search ※1※2 "ON" Route to use the smart IC is searched. "OFF" * Routes that do not utilize smart IC is searched. Way, estimated arrival time display "Destination" * It is displayed distance and estimated arrival time to the destination. "Stop-off place" It is displayed distance and estimated arrival time to the next stop-off land. Estimated arrival time rate (general road) "20 km / h" Estimated arrival time is calculated as the average speed of 20 km / h. "30 km / h" * Estimated arrival time is calculated as the average speed of 30 km / h. "40 km / h" Estimated arrival time is calculated as the average speed of 40 km / h. "50 km / h" Estimated arrival time is calculated as the average speed of 50 km / h. "60 km / h" Estimated arrival time is calculated as the average speed of 60 km / h. Estimated arrival time speed (surcharge road) "60 km / h" Estimated arrival time is calculated as the average speed of 60 km / h. "80 km / h" *

Estimated arrival time is calculated as the average speed of 80 km / h. "100 km / h" Estimated arrival time is calculated as the average speed of 100 km / h. Intersection guidance display "Arrow Guide" * Distance (numerical and arrows) and the information of the intersection name is highlighted is displayed to the guide land Will. "Enlarged view" Planar intersection enlarged view is displayed. Page 104

104 Make the function settings CRA4803-A ETC lane guidance display ※3 "ON" * ETC lane guidance in the vicinity of the toll of the toll road will be displayed. "OFF" ETC lane guide will not be displayed. General road simple guide "ON" It is the voice guidance at the time of root induction simple. "OFF" * It does not perform a simple guide. Signal Just Us "ON" * It will do the traffic lights just assistance. "OFF" It does not signal a machine just assistance. Interrupt to the AV screen "ON" * It will interrupt display such as intersection guide map even during the AV screen display. "OFF"

During AV screen display, it does not interrupt display and intersection guide map. Toll road attention point-border guidance "ON" * It is guided. "OFF" Not being guided. Railroad crossing guidance "ON" * It is guided. "OFF" Not being guided. Refresh guidance "ON" * It is guided. "OFF" Not being guided. Heart full voice ※4 "ON" * It will guide you by voice today's date at the time of the first start-up of the day. "OFF" It is not guided by voice today's date. Light lighting guidance "ON" * It is guided. "OFF" Not being guided. e start guidance "ON" * It is guided. "OFF" Not being guided. Congestion auto guide "ON" *

Congestion information on the route will be voice guidance automatically. "OFF" Congestion information on the route does not automatically be the voice guidance. Narrow street guidance "ON" * It is guided. "OFF" Not being guided. ※ 1 is a function that can only be set when not in route guidance. ※ It becomes automatically to "ON" when the "ETC mounting state setting" of 2 QUICK SETUP is "is attached to the car." You will automatically when in the "not attached to the car" or "OFF". ※ If you do "ETC mounting state setting" of 3 QUICK SETUP, it will automatically to "ON". ※ 4 December 24 - December 25 with "Merry Christmas" and "January 1 - January 3" is "Happy New Year", Audio is played before the date assistance. Page 105

105 Make the function settings Setting of navigation CRA4803-A Congestion information * Is the factory default settings. Congestion information display object road "Toll road and general road" * Congestion information of the toll road and general road appears. "Toll road only" Only congestion information of the toll road will be displayed. "General road only" Only congestion information of the general road is displayed. "Do not show" Congestion information is not displayed. Congestion information display ※1 "ON" *

It appears road fill. "OFF" It does not appear the way painted. Steady display ※2 "ON" Based on the traffic jam information, traffic is smooth road appears road fill. "OFF" * Steady display is not. Regulatory display ※1 "ON" * Congestion information mark and regulatory sections of the traffic regulation will be displayed. "OFF" Congestion information mark and regulatory sections of the traffic regulations does not appear. Parking mark display ※1 "ON" * Congestion information mark of parking will be displayed. "OFF" Congestion information mark of the parking lot will not be displayed. ※ 1 is a function that "congestion information display target road" can be set when other than "Do not show". ※ 2 When "congestion information display target road" is other than "Do not show", and is a feature that can be set when "congestion information display" is set to "ON". Page 106

106 CRA4803-A Make the Bluetooth setting Hands-free function and Bluetooth Audio function, such as smartphones cooperation function Contact To become use, you will need to pre-set the Bluetooth equipment. Memo

You can register up to five Bluetooth devices. Switching type or deletion of the method of Bluetooth devices "I switch the Bluetooth device" (→ P108), "we want to remove a Bluetooth device" (→ P109) Please visit. If you register a Bluetooth-enabled mobile phone with the AV profile, priority contact of Bluetooth Audio It is set as connection equipment. For more information "How to operate the Bluetooth Audio" (→ P140) The visit Kedah Sai. QUICK SETUP (→ P15) You can also set in. • • • Bluetooth equipment Usage PLEASE NOTE This unit, only to Bluetooth wireless connection It has been corresponding. And using, for example, connecting cable Connection can not be of Te so, attention Kedah Sai. Even on devices that support Bluetooth, the equipment If you are drunk there is a limit for connecting to this unit I have. For more information, consult the dealer Give me. This unit, the following Bluetooth profiles I supports. Profile name Use HFP (HandsFreeProfile) Hands-free calling OPP (ObjectPushProfile) Read memory dial Included PBAP (Phone Book Access

Profile) Read memory dial Included A2DP (Advanced Audio Distribution Profile) Audio data transfer AVRCP (Audio / Visual Remote Control Profile) AV equipment of remote control Function SPP (Serial Port Profile) Serial communication Mobile phone "Dial lock", "Auto Or to unlock features such as lock " Please be et al connection. • • • • Do Bluetooth settings One Press (menu), set-ed Collection - telephone and communications - Bluetooth Setting it touches the Memo Mobile phone menu screen (→ P179) And, Bluetooth Audio screen (→ P140) In Bluetooth setting standing in There is also a way to manipulate the switch. • Two Touch and select the item to be set Make Device registration Bluetooth to Bluetooth connection

We will register the equipment to this unit. Oh Luo advance Bluetooth equipment Go to the Bluetooth set to ON Please. (→ P107) Equipment change Bluetooth device to be Bluetooth connection When you have registered two or more, the manual It can be switched. (→ P108) Equipment Delete The Bluetooth registered Bluetooth It will remove the equipment. (→ P109) Page 107

107 Setting of navigation CRA4803-A Passkey Changing the passkey of the unit I can. (→ P109) Radio launch ON the radio wave from the unit / It can be OFF. (→ P110) Mobile phone di Forget Chikomi Guide After you boot the machine, a predetermined time The connection of this unit and the mobile phone within The to ON / OFF a guide if not Rukoto I can. (→ P110) You want to register a Bluetooth device One Device registration it will touch on (→ P106)

Memo If the Bluetooth Audio is playing, medium playback They are cross-sectional. The confirmation message is displayed Because you will, if you register by interrupting Yes And if you do not want to interrupt No go choose Please. It has already been Bluetooth devices registered five If, equipment removed by touching the Bluetooth machine Make the deletion of the vessel (→ P109) , Bluetooth Please do the registration of the device. • • ▼ Automatically looking for Bluetooth devices around You. Search is carried out for about 20 seconds, 10 equipment You can discover up to. ▼ When the Bluetooth device is found, the list table It is shown. The book by your Bluetooth equipment There are times when it is not found in the search from the machine You. In that case, and register from the other equipment That Touch, registration of Bluetooth devices Please register the machine from the menu. For more information, instruction manual of Bluetooth devices Please visit. Two The Bluetooth device to be registered Touch Three The unit or Bluetooth device To perform the pairing by operating the Memo When you first register a Bluetooth device, the connection To identify the other party, it requires pairing operation It is. Pairing method your Bluetooth It depends on the equipment. The unit or Pairing according to the screen display of Bluetooth devices Please be grayed.

The Register this machine to Bluetooth devices (equipment registration and machine For the vessel authentication) How to, Bluetooth equipment Please refer to the instruction manual. This machine, hands-free communication, memory dial Transfer ※ , Bluetooth Audio, NaviCon operation, It supports the smart nAVVi Link operation. ※ Depending on your Bluetooth devices, and each machine It may not support the ability. • • • ▼ Registration completion message appears. Make the Bluetooth setting Page 108

108 CRA4803-A Four Sure touch the ▼ profile of the registered Bluetooth devices By can be done to continue the following settings. Memory dial reading memory dial of the registered Bluetooth devices You can load into the unit. ▼ Setting completion message appears. Bluetooth Audio use confirmation Bluetooth Audio in the registered Bluetooth devices Choose whether or not to use the feature. Smartphone cooperation use confirmation smartphone in the registered smartphone Choose whether or not to use the cooperation function. ▼ Setting completion message appears. Five Sure touch the Switch the Bluetooth equipment

Memo And Bluetooth devices while using the Bluetooth Audio When you perform the switching operation, Bluetooth Audio Playback is interrupted. • One Equipment change I want to touch on (→ P106) Make the Bluetooth setting Page 109

109 Setting of navigation CRA4803-A Two Bluetooth devices to switch It will touch on Three Touch to select the item Hands-free Using the hands-free function You use. Bluetooth Audio Bluetooth Audio equipment It uses as. Smartphone Cooperation Smartphone cooperation machine It uses the function. Memo If set to "hands-free" is , If you are set to "Bluetooth Audio", "Scan The authors If you set the smartphone cooperation " Icon is displayed. When set to "Bluetooth Audio", AV That it has switched the source to Bluetooth Audio It becomes a priority connection equipment to be automatically connected to a tree You. • •

You want to remove the Bluetooth device Memo The selected Bluetooth device is in the incoming and outgoing, busy You can not remove the case. It is operated after the operation is completed Please be. • One Equipment Delete I want to touch on (→ P106) Two To Bluetooth devices that you want to delete Touch Three Yes I want to touch on ▼ The selected Bluetooth device will be deleted. You want to change the passkey One Passkey you touch the (→ P106) Two Enter the passkey to be changed, Input end it will touch on Make the Bluetooth setting Page 110

110 CRA4803-A I ON / OFF the radio launch One Radio wave it will touch on (→ P106) Two ON or OFF touch the ON We will do the radio wave. OFF It does not perform the radio wave. Memo If you set the radio wave to OFF, registered from the machine You can not change the recording operation and passkey.

• Set the mobile phone carry-forget guidance A constant One Mobile phone brought forget guidance to Touch (→ P106) Two ON or OFF touch the ON Performs a mobile phone brought forget guidance You. OFF Performs a mobile phone brought forget guidance No. Make the Bluetooth setting Page 111

111 CRA4803-A Setting of navigation Make the volume settings Guidance volume and hands-free navigation Adjustment of earpiece volume and ring volume of time, the operation sound You set the ON / OFF. Memo QUICK SETUP (→ P15) In it is also to be set You can. • One Press (menu), setEdit - volume settings you will touch on Memo Setting and editing - Telephone and communication - volume setting standing in There is also a way to manipulate the switch. • Two Touch the item you want to set Information volume +

Guidance volume will increase. Guidance volume will decrease. Beep ON Operation sounds. OFF Operation sound does not sound. Receiver volume + Earpiece volume will increase. Earpiece volume is reduced. Ring volume + Ring volume will increase. Ring volume will be smaller. If the operation sound is set to OFF, SD card inserted Warning sound, such as input failure does not sound. Rather Notes Please. • Information / Phone Speaker setting Ia Voice guidance and hands-free navigation And call reception sound, Which front speaker Set whether to output from the car. The factory "Front L + Front R" It is. One Press (menu), setEdit - System Settings Touch to Make Two Information / Phone Speaker set to Touch Set the volume of the navigation Guidance volume of navigation, and the adjustment of the received-call volume during a hands-free, the guide sound Make the speaker settings to output the voice and reception sound. Memo

For the adjustment of the volume of the audio, "Adjust the volume of the audio" (→ P122) Please visit. • Page 112

112 CRA4803-A Three Standing in the speaker you want to output Chisuru Front L it will be output from the front left side. Front L + Front R It will be output from the front left and right. Front R it will be output from the front right side. Set the volume of the navigation Page 113

113 CRA4803-A Setting of navigation Setting the vehicle information Toll classification and parking limit of vehicle, length, width, set the height. Content that has been set here will be reflected in the guidance of the parking and toll road fee. Memo QUICK SETUP (→ P15) You can also set in. • One Press (menu), setEDIT touch the Two Vehicle information setting Touch to Three Set the contents by selecting each item Toll segment toll road during running of fee-ku You set the minute.

(→ P113) Parking limited (model) car limit at the time of parking I set. (→ P113) Parking restrictions (Vehicle size) Vehicle dimensions when parking You set the limit. (→ P114) Memo In the case of route guidance during and highway mode, Yes Fee can not be toll classification settings. • Four End it will touch on Setting of toll classification One Toll segment it will touch on (→ P113) Two Touch to choose the appropriate classification Setting of parking restriction (model) One Parking limited (car) touch the (→ P113) Two Touch to choose the appropriate type of vehicle Make Indicator of the chosen vehicle lights is, you can choose continue. Memo If there is no corresponding model, nothing is not set Give me. • Three Back to Touch Page 114

114 CRA4803-A

Setting of parking restriction (vehicle size) One Parking limited (vehicle size) Touch and (→ P113) Two Touch to select the item to be input Three Enter the dimensions in reference to such car verification is, the input end to touch the Example: length (L) If you choose it is possible to continue to enter the other items You. To terminate the input back to standing Please to switch. Memo To clear once the set value, and of each In the input screen unset it will touch on. • Setting the vehicle information Page 115

115 CRA4803-A Setting of navigation Make the other settings We want to correct the misalignment of the vehicle position If the vehicle position is shifted to, be modified Can you. In state vehicle position fix you always stop Please go. One Press (menu), setEdit - vehicle position correction and touch Make Two Vehicle position correction I want to touch on Three Touch the 8-direction arrow keys I adjust the cross-hair cursor to You are here Memo Tweak When you touch, table of 8-direction arrow keys You can switch the View / Hide. 8 directional arrow keys when you start running while displaying

It is fine-tuning the 8-direction arrow key Touch to consumption Succoth is, I can only once. • • Four Decision it will touch on Five Di Touch the left and right of the rotation arrow Adjust the car orientation Six Decision it will touch on ▼ Vehicle position is modified. Switch the road while driving where the general road and toll road is in parallel Running, road of the vehicle position is actual and different types If you've got in the road, and one vehicle position It is switched to 般道 road or toll road You can. One Press (menu), setEdit - vehicle position correction and touch Make Two Another road switching I touch the ▼ It fixes the vehicle position to the road of a different type You. Memo In some cases, the vehicle position can not be modified. During route guidance, look for the revised route of the vehicle position Re-search. • • Page 116

116 CRA4803-A Setting the Security By the security settings, theft deterrent Effects and theft prevention effect is I can be expected.

It is always theft Your use of this function It is not mean lead to prevention. From car Lock the door and remove the always key when you leave To, such as basic measures attention on your own And you will be as you please. • One Press (menu), setting and editing - System Settings touch the Two Security settings you will touch on ▼ Security Settings screen appears. Security Function This unit is once removed from the battery If that was, passwords match Unless, you can not use the main function You can set as Vinegar. Set security features, It required at the time of the security release And password that, you enter it Set a hint that is displayed when that To you. (→ P116) Indicator effectively set the security function If you were boss, OFF the power of the machine To (OFF the engine switch) Then security as a theft prevention It flashes the utility indicator It can be set to so Vinegar. (→ P118) You want to set the security features One Security features it will touch on (→ P116) Two Setting it touches the Memo If you already a password is set, pa

Of the message does not either change the password There will be displayed. If you want to change it, yes standing Enter the current password by switch input end It will touch on. • Configuration Tips Three Set in a multi-word or Setting than the fixed sentence touch by selecting the Make Multi-word Setting The words of your choice password You can be configured as a hint. Make the other settings Page 117

117 Setting of navigation CRA4803-A Setting than the fixed sentence of five password from a fixed sentence It can be set by selecting the tips You. Example: When you select a setting than the fixed sentence Four The selected tips from five fixed sentence I want to touch in Memo Set in a multi-word when you chose, your preferred Words to the input as hints Mino, input end to Touch. • Password Settings Five Enter the set you want to password is, the input end to touch the Memo You can enter a password, single-byte or double-byte Is less than 12 characters. • Six

the set a password and tips Make sure, the end to touch the ▼ Security features are set. if the security function is activated Operation State that enable the security function In, if you make such as a battery replacement, When the ACC to ON, the following screen is displayed Will. One Sure touch the Two The set password to enter the, Input end it will touch on Memo By any chance, if you forget the password, the dealer Please contact us. • Make the other settings Page 118

118 CRA4803-A Three Sure touch the ▼ Navigation will start. You want to set the indicator Memo place the security function is enabled I can if only operation. • One Indicator it will touch on (→ P116) Two ON or OFF touch the ON LED flashes. OFF

LED does not blink. You want to release the security function If you want to cancel the security function, the following It can be operated as below. One Security features it will touch on (→ P116) Two Release I will touch on Three Yes I want to touch on Four Confirmation Touch to the password Enter, the input end to touch the ▼ Security function is canceled. Make the other settings Page 119

119 Setting of navigation CRA4803-A View the slide frame To display the frame indicating the range that allows slide operation You can be. One Press (menu), setting and editing - System Settings touch the Two Slide frame display settings and touch Make Three ON or OFF touch the ON Slide frame appears. OFF Slide frame does not appear. To return the set to the initial state To return the set function of the state of the factory Thing I can. One

Press (menu), setting and editing - System Settings touch the Two Setting initialization touch the Three Touch to the item you want to initialize Four Yes I want to touch on ▼ The selected item is initialized. Make the other settings Page 120

120 CRA4803-A To return to the factory default state at once To return to the factory default state when you touch the tail Customer is was content and records were set after your purchase Child to return to the state of the factory at once data You bet you can. Once erased data can not be undone. Sufficient Please operate after carefully. The required information, please note of in advance. • • Items to be erased, is as follows. Item to be erased Function settings, audio settings, image quality adjustment Setting, volume setting, vehicle information setting, map Of view and scale settings, traveling locus, The vehicle position information, VICS FM Level 3 Day Data, VICS broadcast station reception mode setting and receive Shin frequency, memory dial, Bluetooth Setting, logo display setting, Rogoma Christo customization, in guidance Route, learning route data, registration areas, Search history, eco-information, such as eco-prize Not erased items Sensor learning, security, etc. Memo The sensor learning to initialize the sensor Science

Please perform the all-reset of learning. (→ P98) • Make the other settings Page 121

121 CRA4803-A Audio Basics The basic operation of the audio You want to display the AV source screen One At the time of the navigation screen I press the (audio) ▼ AV source screen is displayed. To return to the navigation screen, (now Press the Hometown). Memo In AV source is in the ON state (Hometown) press When you are there, the AV source voice na intact It will return to the navigation screen. • For the video-based AV source In the case of the video-based AV sources such as TV, screen Display only the video at the beginning and switched stripes Vinegar. Place you want to display and operation touch key If, please touch the screen once. ▼ Memo Operation touch keys, close to touch on whether the 8 Nothing it will disappear and not operate seconds. • The display of the AV source plate About Left of the map screen, the tuning-by button on the body When carrying out such song selection operation, the map screen AV source plate appears in the section. AV source plate is approximately from being displayed

4 seconds nothing it will disappear and the operation is not performed. The AV source plate, and AV currently playing The source of the state will be displayed. AV source plate Switches the AV source Ru Switching of AV source, touch operation (AV It performed in the Source icon). One You want to display the AV source screen Two To your favorite AV source icon Touch AV source icon ▼ to switch to the selected AV source's. Page 122

122 The basic operation of the audio CRA4803-A Memo Of AV source icon >> When you touch, Table AV source icon that can not be shown a display It is. When you touch again, to its original state It will be back. In the case of the video-based AV sources such as TV, once the picture Touch the surface, or to display the operation touch key Please be et operation. During the navigation screen display is cut only voice The Instead, press the (audio), AV source Screen appears. Source that is not connected to the equipment is accustomed to use No. The steering switch vehicles, MODE scan It can be switched in turn the source on match You. • • • • •

For AV source icon Traffic that is broadcast in such highway Select this when you want to receive the information. Etc. The playing music CD or CD-R / RW I chose you when you want. And select when you want to listen to FM radio broadcast Masu beauty. And select when you want to listen to AM radio broadcast Masu beauty. Select when you want to see the one-segment broadcasting You. Music files stored on SD card Select this when you want to play. When you want to use the Bluetooth Audio Select this. It uses an external audio equipment We choose to Itoki. It was the AV source being selected to OFF We choose to Itoki. Memo Each source icon is ready for reproduction Source only appears. Depending on the source, it is necessary to configure the settings and connections. For more information, Kedah see the description page of each source Sai. • • Make the AV source to OFF If you stop playback or reception of AV source, It makes the AV source to OFF. One OFF touch the ▼ AV source is turned OFF. Memo (Audio) the longer you press, the AV source And you can be on OFF. The steering switch vehicles, MODE scan To turn OFF the source Press longer switch I can. •

• Adjust the volume of the audio Make We will adjust the volume audio. And outside of the sound it is difficult to hear, the cause of the traffic accident It becomes. So as not to interfere with the safe driving Please use a moderate volume. • One Press or the (volume adjustment) Volume will increase. Volume will decrease. Memo If the guidance voice of navigation in the output, sound You may not be able to the amount of the adjustment. Guidance sound It operates in a state where the voice is not output Give me. Also to adjust the difference in volume of each AV source You can. → "source level adjuster setting" (P147) When the guidance voice output of the navigation, automatically To or smaller turn off the sound of the audio I can also. → "mute setting" (P148) The visit Give me. The steering switch vehicles, - / + scan You can adjust the volume with the switch. • • • • Page 123

One two three The basic operation of the audio Audio Basics CRA4803-A Setting the video screen clock display On the screen in the video-based AV source display, Clock

Set whether or not to display. The factory is "OFF". One Press (menu), setting and editing - Audio touch the Two Video screen clock display is touch Make Three ON or OFF touch the ON It will display the clock. OFF It does not display the clock. Reception of emergency warning broadcasting (EWS) About Shin EWS (Emergency Warning System) And receives the emergency alert on TV, disaster This is a system to inform the occurrence. Seg Receiving a broadcast, there has been EWS at the viewing program If, emergency message with a warning voice It will be displayed. The playable media on this unit Type and file of Renewable media in this unit and the file format The combination of is limited. Following You look at the table, correspondence of the variable (○) whether (×) Mounted on a check, please use. In addition, the file format and extension of the corresponding Allowed Even if, such as in how to create a file drunk may not be played (→ P201) . Also, it is described in the table below You can not play file format other than. File Format Extension CD-R / RW SD card WMA

.wma ○ ○ MP3 .mp3 ○ ○ AAC .m4a × ○ WAV .wav × ○ Page 124

124 CRA4803-A Listen to the radio We'll explain how the reception of radio. Receive a radio broadcast One The AV source to FM or AM and (→ P121) Two Touch the station you want to receive Memo List table preset frequency and broadcasters It is shown. Also broadcast stations have been listed, it is here of the ring Some border and radio wave condition, it may not be received There. • • Display switching The frequency scale display screen It will switch. Frequency scan The Touch with kale display screen And that, turn off the list display screen Instead you.

(→ P124) Scan If you touch more than 2 seconds, reception It is automatically a good broadcaster of state It is registered in the user preset You recorded. (→ P126) ▲ SEEK also The SEEK ▲ It will send a frequency in the order. When you long touch, at the reception automatically looking for a broadcasting station that kill, It stops when you receive a broadcast or Vinegar. (SEEK) FM1⇔FM2 (In the case of FM) AM1⇔AM2 (In the case of AM) It switches the band. (→ P125) Preset switching presets (→ P125) It will switch the. If you operate the buttons on the body: Or The Push To order a preset channel I send to Or The Long press It can be received broadcasting station Automatically search (SEEK) Or The Keep pressing Send a frequency in a row (NON STOP SEEK)

Memo Tunnel and Yamakage, such as the valley of buildings, radio waves Intercepted convenient location, in the weak areas of the radio waves, There is a case where the reception state is bad. When receiving a stereo broadcast is [STEREO] It will be displayed. • • The frequency scale display screen Change One Display switching touch the (→ P124) When operating in the slide: During radio reception in the frequency scale display screen Is, it can be done following the slide operation. Sly For de method of operation, "Slid" (→ P22) Please visit. Page 125

125 It wants to receive a broadcast CRA4803-A → slide It met the preset channel You flops. ← slide The da preset channel You luck. ↑ slide It will cancel the mute. ↓ slide We want to mute. Choose the type of preset broadcasting station that the user has registered (user preOr call the set), previously the unit to Broadcasting stations near the vehicle position has been registered (d Choose whether calling a rear preset).

One Preset switching touch the (→ P124) ▼ Each time you touch, the "user pre-set Capital "← →" area preset "is switched You. Memo If you set the preset area, the vehicle around Broadcasting station to display a list of, easily broadcasting stations You can choose. In the area preset, the frequency change of the broadcast station If it is performed, or if the received can not be received Broadcasting station that was might be different from the display. • • Switch the band Two vans to each FM / AM on this unit There is soil, preset memory for each band (1-6) you can use both. One FM1⇔FM2 or AM1⇔AM2 touch the (→ P124) ▼ Each time you touch, the conversion to cut as follows Wari you. FM1↔FM2 AM1↔AM2 Memo We usually use the FM1 and AM1, in Destinations Such as using the FM2 and AM2, used by applications It is convenient to divide have. • You want to register a broadcast station manually The user presets, FM1, FM2, AM1, AM2 before each six stations, manually by registering You can (manual preset). One Conversion cut to "User Preset" get (→ P125)

Two ▲ SEEK / SEEK ▼ Touch to Station you want to register with (frequency) The pick (→ P124) Three 2 to the frame of the registration you want to preset Touch sec ▼ The frequency currently being received, the selected preset It is registered into the city. Listen to the radio Page 126

126 CRA4803-A Automatic registration of broadcasting stations User pre-set a good broadcaster reception state You can be automatically registered into the city. One Scan it will touch more than 2 seconds to (→ P124) ▼ CANCEL If you touch in, stop the automatic registration You. ▼ When the automatic registration is complete, the user pre-set The station is stored into the city. Memo Good broadcaster reception state is less than the registration possible number If no, when the broadcasting station that was previously registered remains I have. • Listen to the radio Page 127

127 CRA4803-A It wants to receive a broadcast

It wants to receive traffic information One Make the AV source in the traffic information (→ P121) ▼ Traffic information screen is displayed, Zhou heard last time You will receive the traffic information of the wave. 1620 kHz We want to 1 620 kHz. 1629 kHz We want to 1 629 kHz. If you operate the buttons on the body: I press the We want to 1 620 kHz. I press the We want to 1 629 kHz. When operating in the slide: During the traffic information received, the following slide operation Can you. For details on how to operate the slide, "Slid" (→ P22) Please visit. → slide You will receive a 1 629 kHz. ← slide You will receive a 1 620 kHz. ↑ slide It will cancel the mute. ↓ slide We want to mute. Memo When you are receiving traffic information, and then adjust the volume If that, be set as the volume for traffic information You can. The volume switch to other AV source To be adjusted, then when receiving the traffic information, You can listen at the volume set last time. • Listen to the traffic information We'll explain how to receive traffic information that is broadcast in such highway. Page 128

128 CRA4803-A Receive a one-segment broadcasting One Make the AV source to TV (→ P121) ▼ AV source screen appears, previously received You will receive the station had. Two Touch the screen ▼ Simple operation touch keys are displayed. 1 ~ 12 Press the key preset Chang I will tune the channel. In the case of user presets, and long Broadcast currently being received Touch The station will be registered. Program guide It will display the program guide. (→ P130) Program content it will display the program content. (→ P131) Detail It will display the operation touch keys. Close up To erase the simple operation touch keys, It will return to the video screen. Operation touch key List items List items You will receive the touched broadcasting stations. ▲ CH also The CH ▼ It sends a three-digit channel in the order or Vinegar. When you long touch, physical Automatically look for the channel, and release It will stop when it receives a transmission. (SEEK)

Subtitle switching If there is a subtitle, turn off the subtitles You recombination. (→ P131) Voice switching If there is more than one voice, the voice It will switch the. (→ P131) Preset switching presets (→ P129) It will switch the. Service switching it off the service of the same broadcasting station Masu camera works. (→ P130) Scan If you touch more than 2 seconds, Ready Automatically registered Noh broadcasters You. (→ P131) Close up It will return to the video screen. See the one-segment broadcasting You can watch the one-segment broadcasting. Memo When you remove the battery or the first time you use the TV source, the viewer setting clear (→ P132) That it has the Zan, when you move to another area, please the channel scan. → "I will register automatically broadcast stations (Channel scan) " (P131) • When the parking brake is being applied in the stop, you can see the image on the monitor. Run For row in safety, it does not appear in the video on the monitor. • Page 129

129 See the one-segment broadcasting

It wants to receive a broadcast CRA4803-A If you operate the buttons on the body: Or The Push To order a preset channel I send to Or The Long press It can be received physical channel Automatically Find (SEEK) When operating in the slide: During the one-segment reception, following the slide operation Can you. For details on how to operate the slide, "Slid" (→ P22) Please visit. → slide It met the preset channel You flops. ← slide The da preset channel You luck. ↑ slide It will cancel the mute. ↓ slide We want to mute. Memo Seg of the volume is lower than other AV source Therefore, the switching from the other AV sources Seg With that, there are times when sound is felt small. Each AV source at the source level adjuster You can align the difference in volume. (→ P147) • Icon List By the broadcast content, the next icon AV source It appears to the nest plate.

Stereo broadcasting Yes more than one voice Yes subtitle Receiving sensitivity of the antenna Conversion cut the type of preset Obtain broadcasting station that the user has registered (Yu Zapuri Or call the set), previously the unit to Broadcasters around the vehicle that are registered (e Rear Choose whether calls the preset). One Preset switching touch the (→ P128) ▼ Each time you touch, the "user pre-set Capital "← →" area preset "is switched You. Memo If you set the preset area, the vehicle around Stations broadcast appears in the list, easily broadcasting You can choose the station. In the area preset, of the broadcast station frequency (tea If the tunnel) changes are made, do not be received If the station it was and received If no is different from the display I have. • • Page 130

130 See the one-segment broadcasting CRA4803-A You want to register a broadcast station manually Manually up to 12 stations to the user presets You can register (manual preSet). One You want to "User Preset" (→ P129) Two ▲

CH / CH ▼ Touch to registered To select the station you want to record (→ P128) Three Preset list you want to register It will touch more than 2 seconds in the frame ▼ Broadcasting station currently being received, the selected preset It is registered into the city. Switch the service Multiple service channels currently being received if is is provided, converted off the service You can get. One Service switching touch the (→ P128) ▼ Another service will be displayed. You want to display the program guide The maximum program guide of the broadcasting station that is currently viewing You can display up to 10 programs. One Highlight the station you want to see a program table Program guide to touch the (→ P128) ▼ program schedule of the selected broadcasting station is displayed. List items Broadcaster's name Memo Touch the list item, to display the program content You. (→ P131) Exit When you touch, to return to the normal broadcast screen You. • • Page 131

131

See the one-segment broadcasting It wants to receive a broadcast CRA4803-A You want to view the program content It will display the program content of the program being viewed. One Program content touch the (→ P128) ▼ Program content is displayed. Three-digit channel number Broadcaster's name Program name Icon Program content Memo Exit When you touch, to return to the normal broadcast screen You. • Registered in the automatic radio stations (Channel scan) A receivable broadcast stations to user presets You can be automatically registered. One Scan it will touch more than 2 seconds to (→ P128) ▼ CANCEL If you touch in, stop the scan You. Switch the subtitles When there is a subtitle to the program, the language and the table of subtitles It switches the shows of ON / OFF. One Subtitle switching touch the (→ P128) ▼ Mode will switch to the next as each time you touch You. Subtitle 1 → 2 → caption subtitles OFF → Return to the subtitle 1 Switch the voice

When there is more than one voice in the program, and off the voice Masu camera works. One Voice switching touch the (→ P128) ▼ Mode will switch to the next as each time you touch You. If there is more than one voice: First audio → second audio → third voice → Back to the first audio In the case of bilingual broadcast (double voice): Main voice → sub audio → main audio + secondary audio → Return to the main voice Page 132

132 See the one-segment broadcasting CRA4803-A To the function setting of one-segment Set the function in receiving one-segment broadcasting You. One Press (menu), setEdit - Audio - TV set in Touch ▼ TV setup menu appears. Viewer setting Clear Hand the machine in such disposal and transfer When you let go, it is recorded in this unit It erases that viewers set You. Auto broadcasting stations Search Settings when the receiving state has become worse, Good relay station of the other receiving state Look for or the affiliated stations in the automatic You set how. Viewer setting clear

One Viewer setting clear touch the (→ P132) Two Yes I want to touch on ▼ Viewer settings are erased. Auto broadcasting station search settings The factory default is "relay station + series station". One Auto broadcasting station search set to Touch (→ P132) Two Select the station Relay station + affiliate stations Relay station-affiliated stations automatically Looking for you. Relay station We are looking for a relay station automatically. OFF Relay station-series station Sagashima To do. Page 133

133 Use music disk CRA4803-A Listen to the music CD We'll explain how to basic playback of music CD. Reproduce One To insert the disk (→ P27) ▼ Playback starts automatically. Album name During track playback Elapsed time Artist name Music name Track No. Song list

It will show the song list. (→ P134) Six During playback, you will pause. During the pause it will resume playing. Repeat I will do repeat playback. (→ P134) Random we will do random playback. (→ P134) If you operate the buttons on the body: Or The Push Track down / up Or The Long press Rewind / fast forward When operating in the slide: During CD playback, the following slide operation line For example you. For details on how to operate the slide, "Scan Ride Operations " (→ P22) Please visit. → slide I will up the track. ← slide You go down the track. ↑ slide It will cancel the mute. ↓ slide We want to mute. Memo It is already the disk you want to play has been inserted If so, please switch the AV source. (→ P121) Order to perform such as a disk discrimination is time before playback Between takes. For disks that can be played back

"Play can Ru Kind of disk "(→ P200) Refer to the Teku 's Sai. Album name, song title, artist name, CD Only if the information can be obtained from the TEXT display of Will. In otherwise, the table as below shown are You. Album name: No Title Music name: No Title Artist name: No Name Music data (CD) and WMA / MP3 data (CD-R / RW) disc that data has been mixed If you play the clause, it will play CD only. • • • • • Page 134

134 Listen to the music CD CRA4803-A Play to choose from the list To view the list, direct election the song you want to play Bukoto I can. One Song list it will touch on (→ P133) Two Touch to a song (track) you want to listen Make Memo To return to the normal playback screen, end or Back It will touch on. • Repeat Play

to be played repeatedly the specified range You can. For example, the range of repeat play If you specify to TRACK REPEAT, during playback You can listen to repeatedly track. One Repeat I will touch on (→ P133) ▼ Each time you touch, the range of repeat play But it will change as follows. ALL REPEAT ← → TRACK REPEAT ALL REPEAT This is the normal playback state. It is playing I will repeat the disk. TRACK REPEAT Track of playing (the song) Repeat. Memo It is beyond the scope of repeat playback during Repeat Play That operation (TRACK REPEAT during the selection of music operation, etc.) If you do, place the range of repeat play is changed There is a case. Aiko the selected repeat play range on the screen It is displayed in emissions but, ALL is the normal playback REPEAT does not appear on the screen. • • Random play You can play by changing the song order. One Random touch the (→ P133) ▼ Each time you touch, random playback of ON / OFF is switched. Memo Field range of repeat playback of TRACK REPEAT If, when you ON the random play, re-repeat Raw range is cut automatically to ALL REPEAT conversion

Wari you. Re-repeat playback and repeat during random play When you perform an operation that exceeds the range of raw, random play But there are times when it is aborted. • • Page 135

135 Use music disk CRA4803-A Reproduce One To insert the disk (→ P27) ▼ Playback starts automatically. Folder No. / Album name File type Of the file being played Elapsed time Artist name Music name File No. Song list It will show the song list. (→ P136) Six During playback, you will pause. During the pause it will resume playing. ▲ folder the folder I will down. Folder ▲ I will up the folder. Repeat I will do repeat playback. (→ P136) Random we will do random playback. (→ P136) If you operate the buttons on the body: Or The

Push File down / up Or The Long press Rewind / fast forward When operating in the slide: CD-R / RW during playback, the following slide Operation I done. Method of operation slide Nitsu Information, "Slide operation" (→ P22) The visit Kedah Sai. → slide It will upload the file. ← slide I will down the file. ↑ slide It will cancel the mute. ↓ slide We want to mute. Memo It is already the disk you want to play has been inserted If so, please switch the AV source. (→ P121) Order to perform such as a disk discrimination is time before playback Between takes. For disks that can be played back "I can play Kind of disk "(→ P200) It's going reference to Sai. ID3 Tag / WMA Tag (→ P202) Title from If you can get the information, song title or album Name, artist name is displayed. The following is if you did not get the title information It appears as. Album name: folder name

Music name: file name Artist name: No Name Place there is an Author information of Tag at the time of the WMA If, to display as an artist name. file that DRM (digital rights management) has been set Il can not be played. Music data (CD) and WMA / MP3 data (CD-R / Play the disk where the data of RW) are mixed If it is played CD only. • • • • • • • • CD-R / RW I listen to (WMA / MP3) We'll explain how to basic playback of CD-R / RW (WMA / MP3). Page 136

136 CRA4803-A Play to choose from the list To view the list, direct election the song you want to play Bukoto I can. One Song list it will touch on (→ P135) Memo Song list and a longer touch, the root folder It will display a list of the Dah. • Two standing want to listen to music (file name) Chisuru Memo Of the top hierarchy folder When you touch

Contents I Lists. The folder name in the folder list display List When you touch, the contents of the folder Displays. Folder number up to 192, which is displayed in the list, Number of files is 255. • • • Repeat Play It is played repeatedly the specified range I can. For example, the range of repeat play If you specified in FILE REPEAT, during playback You can listen to repeatedly file. One Repeat I will touch on (→ P135) ▼ Each time you touch, the range of repeat play But it will change as follows. ALL REPEAT → FILE REPEAT → To FOLDER REPEAT → ALL REPEAT Go back ALL REPEAT This is the normal playback state. It is playing I will repeat the disk. FILE REPEAT File being played (the song) Repeat. FOLDER REPEAT And repeat the folder being played Returns. Memo It is beyond the scope of repeat playback during Repeat Play That manipulate the (FILE REPEAT during the selection of music operation, etc.) When you do, if the range of repeat play is changed I have. Aiko the selected repeat play range on the screen

It is displayed in emissions but, ALL is the normal playback REPEAT does not appear on the screen. • • Random play You can play by changing the song order. One Random touch the (→ P135) ▼ Each time you touch, random playback of ON / OFF is switched. Memo If the range of repeat playback of FILE REPEAT, If ON random playback, repeat playback Automatically cut converted to range FOLDER REPEAT Wari you. FOLDER REPEAT and the other in random play If you play a song of the folder, FOLDER REPEAT is no longer, again of random play only It will be raw. • • CD-R / RW I listen to (WMA / MP3) Page 137

137 CRA4803-A SD Use the card How to SD of operation Operation of music files in the SD card that is connected to this unit (WMA / MP3 / AAC / WAV) We will describe. And out of the SD card, please go in established procedure. → "out of the SD Card" (P28) If you do out in the different procedures, there is a case where the data on the SD card may be damaged. • Memo

This unit supports the following media. SD card: maximum capacity 32 GB, file system FAT 32/16, SDHC support For playable files "Media and file types that can be played on this unit" (→ P123) Please visit. • • Reproduce One Make the AV source to SD (→ P121) ▼ It is played from a file that was last playing You. Folder No. / Album name File type Of the file being played Elapsed time Artist name Music name File No. Song list It will show the song list. (→ P138) Six During playback, you will pause. To stop one o'clock During stop it will resume playing. ▲ folder the folder I will down. Folder ▲ I will up the folder. Repeat and repeat playback. (→ P138) Random and random play. (→ P139) If you operate the buttons on the body: Or The Push

File down / up Or The Long press Rewind / fast forward When operating in the slide: SD of during file playback, the following slide Operation I done. Method of operation slide Nitsu Information, "Slide operation" (→ P22) The visit Kedah Sai. → slide It will upload the file. ← slide I will down the file. ↑ slide It will cancel the mute. ↓ slide We want to mute. Page 138

138 CRA4803-A Memo The Tag to MP3 / WMA / AAC file during playback If the information is present, the song name and album name, Artist name is displayed. If and WAV files can not be retrieved the Tag information It appears as follows if Il. Album name: folder name Music name: file name Artist name: No Name Place there is an Author information of Tag at the time of the WMA If, to display as an artist name. Folder No. is, Yu the hierarchy of deep folder Order to the percentage that was found earlier from the file system Ri swung. File No., the file in the same folder It is allocated in the order in which they are found from the system. Further, files in the media playback order which is connected

It will depend on the configuration. file that DRM (digital rights management) has been set Il can not be played. • • • • • • Play to choose from the list To view the list, direct election the song you want to play Bukoto I can. One Song list it will touch on (→ P137) Memo Song list and a longer touch, the root folder It will display a list of the Dah. • Two touch to want to listen to the song (file) Make Memo Of the top hierarchy folder When you touch Contents I Lists. If you touch the folder name, the folder It will list the contents of a Zehnder. Folder number up to 300, which is displayed in the list, Number of files can be up to 5 000. • • • Repeat Play It is repeatedly playing a specified range Can you. One Repeat I will touch on (→ P137)

▼ Each time you touch, the range of repeat play But it will change as follows. ALL REPEAT → FILE REPEAT → FOLDER REPEAT → ALL REPEAT Return to the ALL REPEAT This is the normal playback state. Playback It will repeat the SD in. FILE REPEAT File being played (the song) Repeat. FOLDER REPEAT And repeat the folder being played Returns. Memo It is beyond the scope of repeat playback during Repeat Play That manipulate the (FILE REPEAT during the selection of music operation, etc.) When you do, if the range of repeat play is changed I have. Aiko the selected repeat play range on the screen It is displayed in emissions but, ALL is the normal playback REPEAT does not appear on the screen. • • How to SD of operation Page 139

139 SD Use the card CRA4803-A Random play By changing the playback order you will be able to play. One Random touch the (→ P137) ▼

Each time you touch, random playback of ON / OFF is switched. Memo If the range of repeat playback of FILE REPEAT, If ON random playback, repeat playback Automatically cut converted to range FOLDER REPEAT Wari you. OFF it is usually play, appear on the screen To do. • • How to SD of operation Page 140

140 CRA4803-A How to operate the Bluetooth Audio That wirelessly connect a Bluetooth device and this unit corresponding to the AV profile In, you can play the music data in the Bluetooth Audio equipment with this unit. The type and version of the AV profile, among which are functional and display can be operated Contents will differ. Connection profile Voice transmission Music selection operation Special playback operation Information display A2DP Ver1.0 ○ × × × A2DP + AVRCP Ver1.0 ○ △ × × A2DP + AVRCP Ver1.3 ○ △

△ △ A2DP + AVRCP Ver1.4 ○ △ △ △ ○: I can. △: it depends on the Bluetooth Audio equipment. ×: It can not. The A2DP (Advanced Audio Distribution Profile), and the profile for transmitting voice wirelessly. The AVRCP (Audio / Video Remote Control Profile), it is the profile for the song selection operation and information display of music. Of Bluetooth Audio equipment Sign up To you have a Bluetooth Audio equipment To advance Bluetooth in this unit You need to register the Audio equipment. → "I make the Bluetooth Settings" (P106) Registration is performed, "Han as usage Handsfree / Bluetooth Audio "also The "Bluetooth Audio" is set Bluetooth Audio equipment, the AV source When it is switched to the Bluetooth Audio Automatically is connected to this unit playback will begin in You. Depending on the connected equipment, playback there are times when it does not start and if it begins. Memo Bluetooth Audio that are not registered in the machine Equipment can not be connected. Change Bluetooth Audio equipment for priority connection If you want, you will go in the Bluetooth Settings Sai. → "switch the Bluetooth device" (P108) In Bluetooth Audio equipment is another profile During the connection, you may not be able to connect. Its For all of the flops Bluetooth Audio equipment Please connect it from cutting the profile. • •

• Reproduce One The source to Bluetooth Audio to switch (→ P121) ▼ Automatically connected to the Bluetooth Audio equipment Was carried out, playback starts. Memo If the Bluetooth device is not registered, prompting a registration A message will be displayed. Yes Touch to And then please register operation. (→ P106) • Song list It will show the song list. (→ P142) Display switching It switched to the play list screen You. Three Play. During the pause, play My resume. Eight It will pause. ▲ group I will down the group. Groups ▲ I will up the group. Page 141

141 How to operate the Bluetooth Audio B l u e t o o

t h A u d i o I use CRA4803-A Repeat It switches the repeat range. (→ P142) Random The random play I ON / OFF. (→ P142) Disconnect This unit and of Bluetooth Audio equipment It will release the connection. Bluetooth For Audio equipment are not connected, and the machine Vessel connection appears. Touch line connection from the navigation side by There you. (→ P143) Bluetooth Setting In addition to the settings of Bluetooth devices Vinegar. (→ P106) Playlist screen Show play list that contains the currently playing song To you. Selection of music in the same play list is possible It is a function. I want to song selection from another playlist Huang, "Playing by selecting from the list" (→ P142) Please visit. Playlist item Play the selected track. If you operate the buttons on the body: Or The

Push Track down / up Or The Long press Rewind / fast forward When operating in the slide: Bluetooth Audio during playback, the following slide Ido operation done. Method of operating the slide For, "Slid" (→ P22) The visit Give me. → slide I will up the track. ← slide You go down the track. ↑ slide It will cancel the mute. ↓ slide We want to mute. Memo Automatically If the playback does not start, 3 standing Please to switch. By your Bluetooth Audio equipment Is, 3 playback does not start when you touch the There is a case. In that case, Bluetooth Please let me start playing the Audio equipment side. Depending on the Bluetooth Audio equipment, rewind and / fast There are times when it does not appear as if the sound comes out in Feed You. If A2DP connection only 3 and 8 and Misao, such as Create touch key can not be selected. In that case Is, I'm going to operate in the Bluetooth Audio equipment side Sai. In Bluetooth Audio use, hands-free equipment When you use the ability and phone book transfer function, temporarily Function of Bluetooth Audio will stop. Even in the case of A2DP + AVRCP connection, depending on the model Theory that has been described in the case and this book can not be operated Te

You might want to behave differently from the Ming. • • • • • • A2DP + AVRCP Ver1.3 or A2DP + When you connect with AVRCP Ver1.4, and track Display information such as the title and artist name It is. (By Bluetooth Audio equipment In some cases, it is not displayed. ) In addition, playback does not start for some reason If or when the connection is broken, and temporary Niso Although these information will not be displayed, Play It will be re-displayed when begins. By Bluetooth Audio device to be used There are features and limitations that can not be used. For more information, please check the dealer. • • Page 142

142 How to operate the Bluetooth Audio CRA4803-A Play to choose from the list To view the list, direct election the song you want to play You can to drive. One Song list it will touch on (→ P140) Two Touch the song you want to hear ▼ The selected file is played. Memo Of the top hierarchy folder When you touch Contents I Lists. Bluetooth Audio machine And the hierarchy below the root folder by vessel Because there is if you are in the top hierarchy, top

In the hierarchy may not be operated. If you touch the folder name, the folder It will list the contents of a Zehnder. • • Repeat Play It is played repeatedly within a specified range You can. One Repeat I will touch on (→ P141) ▼ Each time you touch, the range of repeat play But it will change as follows. ALL REPEAT → TRACK REPEAT → To GROUP REPEAT → ALL REPEAT Go back ALL REPEAT This is the normal playback state. Again Repeat equipment in the raw You. TRACK REPEAT track being played (song) I repeat. And click the group of GROUP REPEAT during playback Ri it will return. Memo by the connected device, the different operations and the playback range There is a case. It is beyond the scope of repeat playback during Repeat Play That operation (TRACK REPEAT during the selection of music operation, etc.) When you do, if the repeat play range is changed I have. Table an icon to the selected repeat play range screen It is shown, but, ALL REPEAT is a normal playback It does not appear on the screen. • • • Random play repeat the chosen Playback

In range, and change the song order You can play Te. One Random touch the (→ P141) ▼ Each time the touch, the range of random play But it will change as follows. OFF → GROUP RANDOM → Return to the ALL RANDOM → OFF The GROUP RANDOM in the group of playing It will play at random. ALL RANDOM Random all songs It will play in. Memo by the connected device, the different operations and the playback range There is a case. "OFF" is the normal playback state. AV Sosupu Screen display of the rate and Bluetooth Audio Not. • • Page 143

143 How to operate the Bluetooth Audio B l u e t o o t h A u d i o

I use CRA4803-A Of Bluetooth Audio equipment About connection If the temporarily connected is disconnected Bluetooth Audio connection to this unit was successful Equipment temporarily for the following reasons If a Bluetooth connection is disconnected, automatically It will re-connect to. ● If you switch the AV source ● If you OFF / ON the ACC ● If you have made a phone book transfer ● If the radio waves launch was OFF / ON ● If you have made the registration of Bluetooth devices Memo In the following cases, it will be excluded from automatic connection. It's going to re-connect from the Bluetooth Audio equipment side Sai. (→ P143) Bluetooth in the operation of Bluetooth Audio equipment side If you disconnect Bluetooth Audio and Bluetooth Audio during playback Equipment away from the unit, forcing Bluetooth connection If someone has been cut Others, re-connection fails for some reason If the • Bluetooth Audio equipment automatically If you are not connected to the To Bluetooth Audio equipment to become errand Depending, and the registration of the Bluetooth Audio equipment It can also be done not automatically connect I have. If this is the case, contact the following procedure Please have continued to. One Equipment connection and touch or, To operate the Bluetooth Audio equipment It is connected to this unit by (→ P140)

Memo The connection is completed within one minute from the start of the connection If not, the connection process will be interrupted. Bluetooth Audio equipment side of the connection operations, That comes with the Bluetooth Audio equipment to the owner's manual Please visit. If you are doing some processing, such as during automatic connection To come equipment connection even touch, it has gone now You can not use this function until the process is completed There is a case. • • • ▼ To start a connection with the Bluetooth Audio equipment You. Page 144

144 CRA4803-A Use the AUX When you connect an external audio device such as a portable audio player to this unit, the You can hear the voice as AV source of this unit (AUX). Memo To connect an external audio equipment to this unit, you need a commercially available φ3.5 mm mini-plug cable. • Hear the voice of external equipment One φ3.5 the mm mini plug cable Connected to the AUX input terminal of this unit AUX input terminal Two Make the AV source to AUX (→ P121) ▼ Voice of the external device will be played. When operating in the slide: During the external device audio playback, the following slide Operation I done. Method of operation slide Nitsu

Information, "Slide operation" (→ P22) The visit Kedah Sai. ↑ slide It will cancel the mute. ↓ slide We want to mute. Memo When you are using the AUX, to adjust the volume If, and it can be set as the volume for the AUX You. Adjust the volume by switching to other AV source Even if you are settling, when using the next AUX, and last You can hear in the set volume. • Page 145

145 CRA4803-A Setting Audio Make a set of audio To your liking, you can be set, such as audio of the sound and function. One Press (menu), set-ed Collection Audio It will touch on Two Audio settings you will touch on ▼ Audio setting menu screen is displayed You. Fader / Balance setting The volume balance between the left and right before and after The settings can be. (→ P145) Loudness setting When listening in a small volume To come, the shortage of low-treble Is corrected, it is sharp

You can be the sound. (→ P146) Equalizer Setting Five that were prepared in advance Settings (factory car Set that was adjusted blanking) and to your liking Equal- from the constant (CUSTOM) You may choose a homogenizer curve You can. (→ P146) Source level Adjuster set To have switched the AV source The difference in the volume is not out to a tree Sea urchin, based on the volume of FM And then the volume of each AV source It can be used to align the difference Vinegar. (→ P147) Mute setting Voice guidance navigation Wearing of and hands-free calling Such as in the case of a trust, it temporarily I squeezed the volume of the audio Ri, the speech by or off to hear It is easier to take can Can you. (→ P148) Memo While traveling there are settings that can not be operated. During the operation of the audio setup menu screen, and sound Voice guidance, if there is such a hands-free phone call , It is not possible to various settings of audio settings. However, sound deadening timing (→ P148) In There OFF If it is set, it is used to configure Can you. AV source in the time and MUTE OFF, the setting can To do.

During traffic information received, source level adjuster You can set the mute setting only. • • • • Fader / balance setting The factory is as follows. Fader: "0" Balance: "0" One Fader / balance setting to Touch (→ P145) Two | , | , | , \ before Touch And to adjust the balance of the rear left and right that Balance of the front and rear left and right of the sound at the position of the cursor You can see the nest. Page 146

146 Make a set of audio CRA4803-A Loudness setting The factory is as follows. Setting: "OFF" Effect: "MID" One Loudness setting touch the (→ P145) Two ON touch the If you do not exert the loudness, OFF the Select this. Three Λ Or Λ In LOW / MID / Set from HIGH

Equalizer settings The factory is "FLAT". One Equalizer settings I want to touch on (→ P145) Two Touch your favorite setting ▼ The equalizer curve each time you touch It will switch. Advanced Setting The selected factory car It will correct the drive. Off § Click To Re Over Mosquitoes Over Breakfast SUPER BASS bass has a thickness of powerful A bass will sound. POWERFUL bass and treble has a thickness, Up-tempo song Meri You will hear the needle well. NATURAL In a natural balance, listen A pleasant sound that is not tired Play. VOCAL Mid-high range is has a thickness, Shin The Kiwa-ritsu the Biya Kana vocal Make myself understood you. FLAT It is not the correction of sound. Setting The boss was equalizer curve By switching to alternate with, equalizer Ensure the effect of the riser , Please use when.

CUSTOM1 , CUSTOM2 CUSTOM is registered in memory Call the adjustment value that was recorded You. Memo CUSTOM1 will be registered for each AV source But, those made in the same setting is as follows. - FM, AM - CD, CD-R / RW • Page 147

147 Make a set of audio CRA4803-A Setting Audio We want to correct the equalizer your chosen factory curve, at each frequency It is possible to correct the finer levels You. The corrected values are registered in CUSTOM1 It is. Memo CUSTOM2 correction value is performed by selecting the It will be registered in CUSTOM2. Already equalizer settings (→ P146) In, CUSTOM1 case registered a correction value to, here In the corrected value is overwritten. • • One Choose the factory curve (→ P146) Two Advanced I want to touch on Three To select the frequency to be corrected, ▲ or Other ▼ the level by touching the Correct

1 0 0 H z, 3 1 5 H z, 1. 2 5 k H z, You can choose the frequency from 3.15 kHz, 8 kHz. 2 dB your between -12 dB ~ +12 dB It can be adjusted to the door. Source level adjuster Setting The factory is "± 0 dB". Memo The volume of the other AV sources relative to the volume of the FM To adjust, when listening to FM, the saw It is possible to set the scan level adjuster No. It is registered to each AV source, but in the same setting Made ones are as follows. - CD, CD-R / RW - AM, traffic information • • One Source level adjuster Set to touch the (→ P145) Two + or - you want to touch on Each 2 dB in the range of -8 dB ~ + 8 dB It can be adjusted to. Page 148

148 Make a set of audio CRA4803-A Mute setting The factory is as follows. Mute timing: "Telephone" Mute Level: "- 20 dB" One Mute setting touch the (→ P145) Two Touch the item you want to set Mute timing Guidance and telephone

Voice guidance and hands-free communication The volume of the audio at the time of arrival of the My Lower. Phone At the time of arrival of the hands-free phone call It will lower the volume of the audio. OFF It does not reduce the volume of the audio. Mute level -10 DB It will be the volume 1/3. -20 DB Volume will be 1/10. MUTE Volume will be 0. Page 149

149 CRA4803-A Use the camera function Use the back guide monitor Back guide monitor options, Asis a driving operation of the recession (especially during parking) Collected by. Guide lines that are displayed as a reference retreat operation in the car behind the video, audio proposal By driving operation in accordance with the internal, easily parked child also one weaker parking You bet you can. (Display setting of the combined guide line to your car will be made in dealer) Back guide monitor Nitsu Notes of stomach PLEASE NOTE Please driving with care without overconfidence this function. Situations such as road-specific characteristics and the road surface, also of driving operation The pre-dispersion and, due to the correction state of the angle sensor You may not be able to park on the measurement position. This function must be set in each model. And therefore When such as your replacement purchases the car, put the machine to the other car The back guide monitor set in the always dealer when changing Please use the changed value of the (vehicle data)

(In other cars may not accustomed to use this function Masu). Please do not overestimate the back guide monitor. One As well as general of the car, be sure to check behind and around the safety directly Please carefully recession while. In particular, it parked around It's going to avoid contact with such as car and obstacles are Sai. And, never to retreat while watching the screen only Give me. The actual status and image are reflected on the screen are different Yes, you can hit the car and retreat to look at the screen only, There is a possibility to cause an unexpected accident. To retreat Rutoki, always cheap in such visual and mirrors behind and around Please check all directly. Please do not use in situations such as the following. • Do not have frozen, slippery road surface or snow-covered road, Tire chains, when you are using the emergency tires Back when the door is not completely closed -Slope is not a flat, such as road Lye operation procedure of each mode of back guide monitor Up is also an example when parking of road conditions, road surface and car Jo Due status, timing the operation amount of the steering wheel operation It is different. In helping to understand the above, Please use the back guide monitor. In addition, parking The Make or when the car, can always park in parking spaces Please perform the operation after certification. If the outside air temperature is low, the screen may become darker, video thin It might be. Video of what is particularly moving Because it may not be seen from the distorted, or screen, Go always driving while checking the perimeter of safety in direct eye Please. When replacing the tires, please consult your dealer. When you replace a tire, of guide lines that appear on the screen It might not be accurate in the position shown. • • • • • • •

• • Memo Due to the nature of the lens of the camera, and Ya who reflected on the screen Obstacle is different from the actual position and distance. • Notes on camera The camera, attached to the rear of the vehicle Masu (mounting position of the rear of the vehicle by vehicle type Location is different). PLEASE NOTE The late back guide monitor is not working properly Please note the following things because there is a record. • The camera unit is beating strongly, and such hit on things, Please do not give a strong shock. Position of the camera, there is a possibility that the mounting angle is shifted You. The camera unit, has become a waterproof structure so, remove Please do not, disassembly and modification death. Rub the camera cover strongly, and Ya stiff brush If you or polished in such abrasive, the cover is damaged, It may adversely affect the image. Since the camera is of the cover is a resin, organic solvents, body Wax oil film up agents, glass coating agent I Please do not attach the etc.. When you adhere to. Please wipe immediately. Rapid temperature change by, for example applying a hot water when coldPlease do not give a. When you hit the camera unit, and such as a camera of failure There is a risk. In response to the inspection at the dealer as soon as possible Give me. • If you are using a high-pressure car wash machine, camera or mosquitoes Go be avoided directing the nozzle directly in the vicinity of the camera Please. There is a possibility that the camera falls off. Memo When the camera lens is dirty, clear image Can not be obtained. Drop of water, snow, dirt, such as mud When attached is washed with water, wipe with a soft cloth Please take. If the dirt is terrible, the neutral Please wash with detergent. •

• Page 150

150 Use the back guide monitor CRA4803-A Select the guide how how The back guide monitor has the following three modes. • course display mode • parking guide line display mode • parallel parking guide mode When you parallel park (garage) Course display mode or parking guide line display, It uses the mode. Course display mode (→ P152) Expected course line such as that linked to the handle operation In this mode, but is displayed. Parking guide line display mode (→ P155) Crosscut point of handle (parking guide line) This mode is displayed. And accustomed to vehicle sense Was better (and parking without the need for a course display mode possible person), please use. When the parallel parking Column guide mode or parking guide line table, It uses the display mode. Column guide mode (→ P157) In most parallel parking by the screen display and voice guidance This mode is for assistant. Parking guide line display mode (→ P166) Crosscut point of handle (parking guide line) This mode is displayed. In the parking without the need for a column guide mode Do not be used to kill people and column guide mode Please use such as in Itoki. Course erase Column guide Please check around the vehicle directly Re-voice Guide stop

Please check around the vehicle directly Course erase Column guide Please check around the vehicle directly Course erase Column guide Please check around the vehicle directly Page 151

151 Use the back guide monitor CRA4803-A Use the camera function Switching to the back guide monitor screen One When the engine switch is ON, The shift lever to the R (reverse) Make The video of the back guide monitor is displayed. Course display mode (→ P152) (Or parking Guy De line display mode (→ P155) ) Is displayed. If you switch the shift lever to the other gear, the field Surface display is switched to the original video. ▼ For range reflected in the screen From bumper rear end of the car behind (in the range shown in the figure below) it is reflected. Memo In back camera display, (audio), (Hometown), press the (menu), back camera video To release. • Near both ends of the bumper is not reflected Course erase Column guide Please check around the vehicle directly

Page 152

152 Use the back guide monitor CRA4803-A Memo By the situation of the car and the road surface, reflected range may be different. The range that is reflected in the camera there is a limit, those at the bottom of the near both ends and bumper of the bumper is not reflected. Since the back guide monitor of camera you are using a special lens, the sense of distance of the image reflected on the screen actually Distance with me is different. When the following circumstances, the screen may be difficult to see, but it is not a malfunction. Dark -. (Such as at night) Lens temperature is high in the vicinity, or when it is low. And when with a drop of water to the camera, when humidity is high. (Rainy weather, etc.) When a foreign object (such as mud) is attached to the vicinity of the camera. • When the light of the sun and head lamp hits the lens of the camera directly. • When the high brightness point (such as the sun reflected on the vehicle body) is reflected in the camera, the CCD camera-specific smear phenomenon * The nest but occurrence There is Rukoto. * Sumiya phenomenon: it is reflected in the high brightness point of (the body The sun, etc.) Film in camera That the the point is vertical (vertical direction) Phenomenon catching the tail. You can adjust the hue and color saturation, brightness and contrast of the screen. → "adjust the image quality" (P25) • • • • • The parallel parking (course display mode) Screen of seeing how ① expected course line (yellow) It shows the measure of the course the car is going to retreat. • it will work with the steering wheel operation.

② vehicle width extension lines (green) It shows the measure of the course when it was straight back the car. • You can display wider than the actual car width. • when the handle is straight (straight state), the expected course line It will overlap with. Course display Please check around the vehicle directly In terms of high brightness Course erase Column guide Please check around the vehicle directly ① Expected course line (yellow) ④ Distance reference line (yellow) about 1 m away Bumper rear end ③ Distance reference line (green) about 0.5m destination ④ Distance reference line (red) about 0.5m destination ② Vehicle width extension lines (green) The front of the car Page 153

153 Use the back guide monitor CRA4803-A Use the camera function ③ distance reference line (green) It will show the distance of the car backward (from bumper rear end). • it represents approximately 0.5 m away. ④ distance reference line (red / yellow) I shows the distance of the car backward (from bumper rear end). • it will work with the steering wheel operation. It will move along with the expected course line. • In each of the center position, about 0.5 m away (red), about 1 m away (yellow) is shown To you. • handle error occurs when not in straight (straight state)

You. In the above screen, the actual distance (red distance guide lines are shown: about 0.5 m away, Yellow: Table than about 1 m away), on the right side of the close position, on the left side of the distant position It is shown. PLEASE NOTE Due to the number of passengers, load capacity, the position indicated by the guide line of the screen will change. Always backward and surrounding safety Please driving while checking directly. when the handle is shifted straight predicted course in (straight state) and the vehicle width extension line is, as much as possible to bend There is no such corner curve, please traveling more than about five minutes a little road of congestion in advance. Still, such repaired Itoki, please have it inspected by the dealer. Car width extension lines appear wider than the actual car width. When you retreat, safety directly always behind and around Please driving while checking. Memo Course erase When you touch, the expected course line-vehicle width extension lines will not be displayed. Also, at this time distance eyes Cheap line is fixed (not in conjunction with the steering wheel). Course display to return to the original When you touch. • We want to start a parallel parking If you want to park in the parking space of the following procedure in reverse direction, the steering will be all right and left reversed. One Make the shift lever to the R (reverse) The video of the back guide monitor is displayed. • • • Memo If you have not become a path display mode, please course display mode. → "display of the parking guide line" (P171) • Course erase Column guide Please check around the vehicle directly

Page 154

154 Use the back guide monitor CRA4803-A Two By operating the handle so that the predicted course line enters into the parking space, It will slowly retreat Three Once the car back is entered in the parking space, the vehicle width extension lines and the parking space As the distance between the left and right of the section line is much the same in the vicinity of the position of the car, I operate the steering wheel Four Once the parallel section line of parking and vehicle width extension lines, straight handle In (straight state), until the car enters all the parking spaces, slowly retreat Make Course erase Column guide Please check around the vehicle directly Expected course line Course erase Column guide Please check around the vehicle directly It will be about the same interval Section line of parking Vehicle width extension lines Parking space Course erase Column guide Please check around the vehicle directly Page 155

155

Use the back guide monitor CRA4803-A Use the camera function Memo When you park, because the actual situation with the video of the screen there is a different thing, please be sure to check directly. · Distance may appear to parallel the guide line and the rear end of the parking space screen, there may not be actually parallel to. • When parking section line there is only one side, parallel to the vehicle width extension line and the left edge of the parking space (right) screen This may look (see below), there may not be actually parallel to. • The parallel parking (parking guide line display mode) Screen of seeing how ① vehicle width extension line It shows the measure of the course when it was straight back the car. • You can display wider than the actual car width. ② distance guide lines It will show the distance of the car backward (from bumper rear end). • it represents approximately 0.5 m away. ③ parking guide line Recession by turning the handle to the full (most small turn) the indication of the course of time I shows. • It is a measure of the position to manipulate the handle to the parking time. PLEASE NOTE Due to the number of passengers, load capacity, the position indicated by the guide line of the screen will change. Always backward and surrounding safety Please driving while checking directly. Car width extension lines appear wider than the actual car width. When you retreat, safety directly always behind and around Please driving while checking. Memo Course erase When you touch, the vehicle width extension lines, parking guide line will not be displayed. Route display and touch Then it will return to the original. • • • Course erase Column guide

Please check around the vehicle directly Section line of parking Course erase Column guide Please check around the vehicle directly ② Distance guide lines about 0.5m destination ① Vehicle width extension lines ③ Parking guide line Bumper rear end The front of the car Page 156

156 Use the back guide monitor CRA4803-A We want to start a parallel parking If you want to park in the parking space of the following procedure in reverse direction, the steering will be all right and left reversed. One Make the shift lever to the R (reverse) The video of the back guide monitor is displayed. Memo If you have not become a path display mode, please course display mode. → "display of the parking guide line" (P171) • Two The stop parking guide line is retracted to fit the partition line of the left edge of the parking space Memo When you retreat to match the partition lines and the parking guide line as of the screen, in the case where the width of the parking space of about 2.2 m It will enter almost in the center. Please adjust the in stop position according to the width of the parking space. • Three Turn the handle to the right full, slowly retreat

Course erase Column guide Please check around the vehicle directly Compartment line Parking guide line Course erase Column guide Please check around the vehicle directly Page 157

157 Use the back guide monitor CRA4803-A Use the camera function Four Once the car is parallel to the parking space, it will be straight (straight state) the handle Screen retreated to an optimum position for reference, the parking It terminates. And parallel parking (column guide mode) Flow of car movement and screen, voice guidance The movement of the car The operation content Course erase Column guide Please check around the vehicle directly About 1m The column guide Once the car is substantially straight Mode is finished. The Toma and if there on the left end of the position where you want to park Ri, until fill the handle in the opposite direction Operate. (Screen 4) The parallel to the road, distance between and parked cars There are stops at the position of about 1m. The rear end of the car the green vertical line is, you are parked next to It stops After retracted until it fits in. (Screen 1) Operating the handle while stopping the car, the green When you match the location where you want to park the frame, Han

The retreat in the dollar as it is. (Screen 2) Is displayed green curve, green curve is parked Hand to fit the left edge of the position you want to car The retreat in the intact Le. (Screen 3) Distance guide lines I by the handle as it is In reference to etc., and check the peripheral visually and mirrors To retreat. (Screen 5) Page 158

158 Use the back guide monitor CRA4803-A Flow of screen and audio Re-voice Guide stop Please check around the vehicle directly Green vertical line, to retreat to fit to the rear end of the car, which is parked next to. "Behind the green vertical line next to the car Stop by back until it fits. " Audio assist Re-voice Guide stop Please check around the vehicle directly Retreat to here. Re-voice Guide stop Please check around the vehicle directly To match the location where you want to park the green frame. and "while stopped, or the handle By I, and parking space the green frame It will fit in. " Audio assist Re-voice Please check around the vehicle directly Once you adjust the "frame, the handle

Check the periphery of the vehicle to the left While it will be back. " Audio assist Re-voice Please check around the vehicle directly Green of the curve I retreat to fit on the left side of where you want to park. Re-voice Please check around the vehicle directly Where we want asked the car "green line If there on, the handle stopped It will crosscut the way to the right. " Audio assist Re-voice Please check around the vehicle directly And distance reference line as a reference, to retreat to confirm the peripheral visually and mirrors. "The handle intact, car Back while checking both peripheral To you. " Audio assist Page 159

159 Use the back guide monitor CRA4803-A Use the camera function PLEASE NOTE In no road a flat-straight such as curve and slope, please do not use. Please operation must be performed in the state that stopped the car steering wheel operation. Memo If you want to cancel the guide, you can touch the guide stop. If you want to hear the voice guidance again, and then touch to re-voice. Volume of voice guidance it can be adjusted. → "Setting the column guide of volume" (P170) • • • You want to start a parallel parking

Here, we describe the procedure in the case of parking in the parking space on the left. On the right side of the parking space When parking, handle operations, such as will be all right and left reversed. One Parallel to the road (or shoulder), the position of the interval is about 1m of the parked car The stop in, to straighten (straight state) the handle Position of front and rear, and parked car And in front of the position as more car half You. • • Two Make the shift lever to the R (reverse) The video of the back guide monitor will be displayed in the course display mode or parking guide line display mode. Nearly half car Vehicle About 1m The parked car The position where you want to park Page 160

160 Use the back guide monitor CRA4803-A Three Check the position of the car, touching the column guide Cormorant than rear tire of the car, which is parked on the screen We will make sure that the part of the white is reflected Please. Before to the correct position the car when it is not reflected The advance is to retry the operation. Four Once you have verified that the stopped car in the same position as the displayed screen, Next I want to touch on Memo This display omitted from the next time when you touch on, this screen will not be displayed. Again, I would like to display Huang

"Display of the beginning of the tips" (→ P171) Please reference to. Guide stop If you touch, you return to the previous screen. • • Five If you are guided by the voice, the green while in the handle straight (straight state) Stop vertical line is retracted to a position that meets the rear end of the car, which is parked next to Retract the car Re-voice Guide stop Please check around the vehicle directly Green vertical line "Behind the green vertical line next to the car Stop by back until it fits. " Audio assist Re-voice Guide stop Please check around the vehicle directly The stop is retracted to here. Green vertical line Course erase Column guide Please check around the vehicle directly Page 161

161 Use the back guide monitor CRA4803-A Use the camera function Memo When the recession is not straight (straight state) the handle, there is a thing that would go to the next voice guidance You. In that case, first to advance the car to a position to stop the car, please try again. Even a shift lever to a position other than R (reverse), and returned to the R (reverse) within 10 seconds, this screen It will be back.

• • Six When you see the green frame is guided by the voice, the handle to the left while stopped Turn to, to match the location where you want to park the green frame Re-voice Guide stop Please check around the vehicle directly and "while stopped, or the handle By I, and parking space the green frame It will fit in. " Audio assist Green vertical line Green frame Re-voice Please check around the vehicle directly Green vertical line Green frame Green vertical line I want to parking Location Green frame Turn the steering wheel to the left Green vertical line Green frame Page 162

162 Use the back guide monitor CRA4803-A PLEASE NOTE Please make sure that there are no obstacles in the green frame always. If there is an obstacle in the green frame, the column Guide mode can not be used. When you match the location where you want to park the green frame, car green line extending always in front is parked in front Please do not take to the tire. And parked in front Together to the point where you want to park the green frame If it takes the car you are, please combined in a range that does not take.

• • Memo Message may be displayed in the screen. By-frame becomes red, message, such as the right is displayed Et al., It can not be the guide, and return the handle Give me. Even if-frame matches the correct parking position, such as on the right you may receive a message is displayed. In this case, the car Because you believed that you are too far away from the shoulder, parked next to Please check the interval (about 1m) of the car you have car. • Seven When you see the green frame is guided by the voice, the handle to the left while stopped Turn to, to match the location where you want to park the green frame Re-voice Please check around the vehicle directly The extension is applied to the tire Handle intact Once you adjust the "frame, the handle To the left, check the peripheral vehicle While it will be back. " Audio assist Please check around the vehicle directly Please return the handle does not guide Please return the handle does not guide Please check around the vehicle directly Please return the handle does not guide Please return the handle does not guide Page 163

163 Use the back guide monitor CRA4803-A Use the camera function PLEASE NOTE The right front end of the car to be careful not to hit in front of the obstacle, please slowly retreat. Memo

When the recession is not straight (straight state) the handle, following You may inadvertently go up to voice guidance. In that case, First to advance the car to a position where stopped the car, we go again Sai. Even a shift lever to a position other than R (reverse), and returned to the R (reverse) within 10 seconds, this screen It will be back. • • Eight When you see the green curve is guided by the voice, as it is of the state of the handle To to retreat to Green of the curve, it will stop if there a point of the left edge of the position where you want to park. • Please check around the vehicle directly You can not guide handle was shifted You can not guide handle was shifted Re-voice Please check around the vehicle directly Re-voice Please check around the vehicle directly Where we want asked the car "green line If there on, the handle stopped It will crosscut the way to the right. " Audio assist Green curve Page 164

164 Use the back guide monitor CRA4803-A Memo When the speed of the recession is too fast, it may guidance is not in time. • Nine While stopping the car, turn the steering wheel fully to the right Please operate the handle Always be sure to stop the car. Ten When the screen is guided by the switched voice, the handle to the intact

And then to retreat The green curve It fits in here Green curve As it is the handle To to retreat to Turn the handle to the right full Re-voice Please check around the vehicle directly "The handle intact, While checking the periphery of the vehicle You back. " Audio assist Page 165

165 Use the back guide monitor CRA4803-A Use the camera function PLEASE NOTE And being careful not to hit the car that is parked on the left front end of the car to the front, please slowly retreat. Eleven Once the car becomes parallel to the road (or shoulder), straighten the handle (straight-shaped Return to Thailand) Twelve The distance guide line as a reference, check the front and back of the car must always visually or mirror, slowly And stops by recession When the car is nearly straight, column guide mode will end by being the voice guidance. • Re-voice Please check around the vehicle directly Distance guide lines "I finished the column guide." Audio assist

Page 166

166 Use the back guide monitor CRA4803-A And parallel parking (parking guide line display mode) Screen of seeing how ① vehicle width extension line It shows the measure of the course when it was straight back the car. • You can display wider than the actual car width. ② distance guide lines It will show the distance of the car backward (from bumper rear end). • it represents approximately 0.5 m away. ③ parking guide line Recession by turning the handle to the full (most small turn) the indication of the course of time I shows. • It is a measure of the position to manipulate the handle to the parking time. PLEASE NOTE Due to the number of passengers, load capacity, the position indicated by the guide line of the screen will change. Always backward and surrounding safety Please driving while checking directly. Car width extension lines appear wider than the actual car width. When you retreat, safety directly always behind and around Please driving while checking. Memo Course erase When you touch, the vehicle width extension lines, parking guide line will not be displayed. Route display and touch Then it will return to the original. • You want to start a parallel parking When parking in the parking space of the following procedure in reverse direction, the steering will be all right and left reversed. One Make the shift lever to the R (reverse) The video of the back guide monitor is displayed. Memo If you do not have a parking guide line display mode, please the parking guide line display mode. → "parking Display of guide lines "

(P171) • • • Course erase Column guide Please check around the vehicle directly ② Distance guide lines about 0.5m destination ① Vehicle width extension lines ③ Parking guide line Bumper rear end The front of the car Page 167

167 Use the back guide monitor CRA4803-A Use the camera function Two Stops After retreat parking guide line is to fit the left edge of the position that you want to park Three Turn the steering wheel to the right full, slowly retreat PLEASE NOTE And being careful not to hit the car that is parked on the left front end of the car to the front, please slowly retreat. • Course erase Column guide Please check around the vehicle directly The position where you want to park Course erase Column guide Please check around the vehicle directly Page 168

168 Use the back guide monitor CRA4803-A Four Once the car becomes parallel to the road (or shoulder), straighten the handle (straight-shaped It will be in Thailand) The screen to check the front and back of the car must always visually and mirrors to reference, and finished the parking retracted until the optimum position You. Error between the actual road surface and the screen When the following conditions, will cause an error in the Distance course on the actual road surface with the guide of the screen (Ira List shows the case of a standard camera mounting position). When a steep uphill is in the rear Distance reference line shows a measure of the distance to a flat road surface. Therefore, uphill backwards When it is in, you will see the distance guide lines in front than the actual distance. For example, failure to uphill If there is a thing, it looks like there is in fact than in the distance. Error will also occur in the actual path on the road surface as well as guide lines. Course erase Column guide Please check around the vehicle directly Course erase Column guide Please check around the vehicle directly 1.0m 0.5m Distance guide lines 1.0m 0.5m Actual distance Error Page 169

169 Use the back guide monitor CRA4803-A

Use the camera function When a steep downhill is in the rear when the downhill is in the rear, you will see the distance guide lines in the back than the actual distance. Down If there is an obstacle on the hill, it looks like there is in fact than in the vicinity. Error will also occur in the actual path on the road surface as well as guide lines. when the car is tilted Number of passengers, when the tilted car due to load capacity, the actual distance, the course and the error will occur. Notes when the three-dimensional object is near Guide of the screen has a plane product (such as roads) to the target. Threedimensional object with overhang (track When the clauses of the obstacles, such as the loading platform) is nearby, and so that it does not collide with the following in mind Please be in. Expected course line Since predicted course line that is displayed to the road surface, not be able to determine the position of the three-dimensional object. On the screen, located on the outside of the loading platform is expected course line of the track, it seems to not collide, the real It may be hit because the bed is overhanging on the course in the case. Predicted course like this When the line is passing through a nearby obstacle, please check the rear and the surrounding safety directly. Course erase Column guide Please check around the vehicle directly 1.0m 0.5m Error error 1.0m 0.5m 1.0m 0.5m Error error Course erase Column guide Please check around the vehicle directly

Expected course line Page 170

170 Use the back guide monitor CRA4803-A Distance guide lines The distance guide lines that are displayed to the road surface, can be determined the distance between the solid object To do. On the screen, it looks like truck is parked in about 1m away by the distance reference line (the position of the B) or But, actually to be retracted to the position of A, it will hit. The screen looks close to A, B, in the order of C, but the actual distance in the A and C are the same distance, B to A, from C It is located in the far distance. Setting the column guide of volume You can adjust the volume of the voice guidance. One Press (menu), setting and editing - System Settings touch the Two Back guide monitor settings to Touch Three Column guide volume I want to touch on Four + or - Touch to volume I will adjust the Five End it will touch on Course erase Column guide Please check around the vehicle directly C B A C A B

About 1m Page 171

171 Use the back guide monitor CRA4803-A Use the camera function Display of the beginning of the tips Is displayed in the column guide mode "the beginning of the You can set whether or not to display the knack. " You. One Press (menu), setting and editing - System Settings touch the Two Back guide monitor settings to Touch Three The beginning of the tips display I touch the Four will be or to not to touch the Five End it will touch on Display of the parking guide line Or course display to the parking guide line display mode Either mode, you can set. One Press (menu), setting and editing - System Settings touch the Two Back guide monitor settings to Touch Three Parking guide line display I want to touch on Four will be or to not to touch the Make It will be in the parking guide line display mode. are not you will course display mode. Five End it will touch on

Page 172

172 Use the back guide monitor CRA4803-A It is displayed during system initialization When it came out Decrease battery desorption battery capacity of If in such as you have, and the screen during system initialization There will be displayed. In this case, you will choose one of the following Sai. In a state where the parked car, left the handle sect After you turn the stomach, turn fully to the right (left Right it is acceptable in either first). There is no such possible corner curve, About 5 minutes following the road that are not congested in advance The top running. Returning to the normal screen, it is finished setting. While the system initialization in screen is displayed Manotoki is, you will have it inspected by dealer Sai. Memo On the screen during system initialization, touch the Help And, it will be able to display how to operate. Do displayed on the screen, the normal picture This is the setting Exit Returning to the surface. During system initialization, or help screen is displayed When the still be, and it will undergo inspections dealer Please. Exit When you touch, you return to the original screen. • • • • • • Battery of desorption, or When it was replaced put this unit Battery of desorption, or the machine to another car Such as in the case of recombinant put, a confirmation screen is displayed

It is. In this case, the following operation or reseller Setting is required. Yes When you touch, the setting of the guide line It will be deleted. Moth that is tailored to your car The display setting of lines of latitude, ask the dealer Give me. No Touch to, and display the guide line And then, it will be able to mirror the rear of the car. (When it was replaced put the unit in another car, was placed guide line a table of car that was set before changing Is indicated) Returning to the normal screen, it is finished setting. While the system initialization in screen is displayed Manotoki is, you will have it inspected by dealer Sai. Page 173

173 CRA4803-A Use the camera function Use the back monitor When fitted with optional back monitor, and shifts to reverse gear, the unit Automatic behind the camera video and guide lines on the monitor screen of the (car width and sense of distance of vehicle You can mirror the auxiliary line) to compensate for the sense (the display of the combined guide line for your car Setting I will do in the dealer). When replacing the tires, please consult your dealer. When you replace a tire, screen There is an error occurs in the position indicated by the distance guide lines and guide lines to be displayed in. PLEASE NOTE Please do not overestimate the back monitor. This unit (back monitor), a confirmation of such obstacles Please use as an auxiliary means for. When such as raindrops is attached to the camera unit, reflected adversely There is Kunar fear. The vehicle of the situation (the number of passengers, load capacity), and the field Position indicated by the surface of the guide line will change. It has to, Luck while checking the rear and peripheral safety directly Please be rolling death.

It is retracted while looking at the only monitor screen Please do not absolutely. Always room mirror, The combination of door mirrors, rear and the surrounding safety Please be fully confirmed. The Do not use in situations such as: There. • The frozen or, slippery road surface, also The snow-covered road back door is not completely closed • When the tire chain, use the emergency tire Road is not flat like-hill when you are when the display is cold, the video is the tail You can pull, and less likely to be recognized darker than usual There are times when it becomes. The periphery of the safe to direct always Please driving while checking in the eye. If you are using a high-pressure car wash machine, camera or mosquitoes Avoid that direct to direct the nozzle around the Mera Please be. There is a possibility that the camera falls off You. Memo Due to the nature of the lens of the camera, and people reflected on the screen And obstacles is different from the actual position and distance. You can hit strongly the camera unit, do not hit a thing Etc., please do not give a strong shock. Camera Position, the shift is mounting angle Bakkumoni of There is a possibility that the Tar is not working properly You. Since the camera unit has become a waterproof structure, preparative Please do not the Disconnect, disassembly and modification. Backing is a possibility that the clock monitor is not working properly There. Rub strongly the camera's cover, hard Bra If you or polished in such poetry and abrasive, cover is a risk that it is damaged, adversely affecting the image There. • • • • • • • •

• • • • Since the camera cover is a resin, organic solvents, Body wax, oil film removing agent, glass coat Please do not adhere to such agents. Attached Please wipe immediately when. Sharp temperature by, for example applying a hot water when cold If you give a change, back monitor successfully There is a risk that it will not operate. When I hit the camera part, I failure of camera Not back monitor is working properly by etc. There is likely to be. The inspection at the dealer as soon as possible Please receive. Please do not long taken direct sunlight. You may baking phenomenon remains. The photograph is one case. Range reflected on the monitor image It depends on the type of vehicle. The moment of shifting to reverse gear, once white It will be on the screen, but then gradually stabilized. Sunlight, when a strong light hits such as headlight it may up and down white belt comes into. if used for a long time, the white scratch by temperature rise I get or vertical line, but due to the CCD characteristics It is. In the fluorescent lamp of 50Hz power region, the flicker of the screen Yellow (flicker phenomenon) will occur, but a malfunction It is not. Back monitor camera uses a special lens Due to the use, distance sense of the image reflected on the screen I differ from the actual distance. • • • • • • • • •

• Page 174

174 CRA4803-A The video of the back monitor It mirrors the rear of the video One The shift lever I to R (reverse) The rear of the video is reflected on the monitor screen automatically. When the shift lever other than R (reverse) It will return to the normal screen. When the back monitor image, in the lower right corner of the screen guide ON or OFF guide will be displayed. To view the guide line guide ON the island Vinegar. If you do not want to display the guide lines and Guy De OFF it will touch on. Use the back monitor ▼ Page 175

175 CRA4803-A Use the camera function For see how the screen Only display line way When the shift lever to R (reverse), the monitor screen is switched to the image of the back monitor, Back guide line to compensate for the vehicle width and distance sensation appears. ① vehicle width extension line It shows the measure of the course when it was straight back the car. It can display actual wider than the vehicle width. ② distance guide lines It will show the distance of the car backward (from bumper rear end). It does not work with handle operation. In each of the center position, about 0.5 m away (the first run), about 1 m away (two eyes), about 2 m away (3 rd) I shows. PLEASE NOTE Car width extension lines appear wider than the actual car width. When you retreat, safety directly always behind and around

Please driving while checking. Memo By the situation of the car and the road surface, reflected range may be different. Range reflected in the camera there is a limit, those at the bottom of the near both ends and bumper of the bumper is not reflected. The rear of the image might be different from the actual color. You can adjust the depth, contrast, brightness of the hue and black depth and color of the screen. → "image quality To adjust the "(P25) It may back guide line is displayed shifted to the left and right by the vehicle, but it is not a malfunction. • • • • • • ① ② C B A C A B About 1m Use the back monitor Page 176

176 CRA4803-A Distance guide lines Since the distance guide lines that are displayed to the road surface, not be able to determine the distance between the three-dimensional object. On the screen, it looks like tracks are parked about 1 m away by the distance reference line (the position of the B) The painting you, but in fact when you retreat to the position of A, you can hit. The screen looks close to A, B, in the order of C, but the actual distance A and C at the same distance, B is A, C

It is located in the farther distance. Memo When the following circumstances, the screen may be difficult to see, but it is not a malfunction. Dark -. (Such as at night) Lens temperature is high in the vicinity, or when it is low. And when with a drop of water to the camera, when humidity is high. (Rainy weather, etc.) When a foreign object (such as mud) is attached to the vicinity of the camera. • When the light of the sun and head lamp hits the lens of the camera directly. • When the high brightness point (such as the sun reflected on the vehicle body) is reflected in the camera, the CCD camera-specific smear phenomenon * There departure You may want to live. * Sumiya phenomenon: high brightness point (such as the sun reflected on the vehicle body) That point up and down (vertical direction when but reflected on the camera Phenomenon to pull the tail in direction). • Error between the actual road surface and the screen When the following conditions, will cause an error in the Distance course on the actual road surface with the guide on the screen. (Lee Last shows the case of a standard camera mounting position. ) When a steep uphill is in the rear Distance reference line shows a measure of the distance to a flat road surface. Therefore, uphill after When there in person, you will see the distance guide lines in front than the actual distance. For example, disabled in uphill If there is harm thing is, it looks like there is in fact than in the distance. Error will also occur in the actual path on the road surface as well as guide lines. Course display Please check around the vehicle directly In terms of high brightness 1.0m 0.5m Distance guide lines 1.0m

0.5m Actual distance Error error Use the back monitor Page 177

177 CRA4803-A Use the camera function When a steep downhill is in the rear When the downhill is in the rear, you will see the actual distance guide lines in the back than the distance. Downhill If there is an obstacle to, it looks like there is in fact than in the vicinity. Error will also occur in the actual path on the road surface as well as guide lines. 1.0m 0.5m Error Error 1.0m 0.5m Use the back monitor Page 178

178 CRA4803-A Use a mobile phone When this unit and the mobile phone Bluetooth connection, you can use the telephone functions of this machine. Make a hands-free phone call A mobile phone when Bluetooth connected to this unit, You can make a hands-free call. Memo As easy listening voice of the other party is, reception Please adjust the volume. (→ P111) The following cases, this is voice to the communication partner side There is that it becomes difficult to hear. When running on a rough road During high-speed driving

When you have opened the window Aim the air conditioning vent towards the microphone When was When the large air-conditioner fan of sound When you close the mobile phone to the microphone To mobile phones and network of influence to be used Ri, the sound quality is worse (noise, echo, etc.) that I have. • • • For safety operation, it calls while driving as much as possible Please avoid. The forced call while driving through to make sure the safety of the well around if you want to Please do exit briefly talk. • To make a hands-free call Mobile phone corresponding to Bluetooth is necessary It is. In addition, the registered mobile phone to the unit in advance There is a need to keep the record. For more information "To the Bluetooth Settings" (→ P106) It is Goranku Please. Memo When it comes to your mobile phone, be sure "Notes on Bluetooth devices use" (→ P106) The Please read phrases. This unit, to interrupt the call and three-way calling service It does not correspond, the operation on the mobile phone side Please be. In addition, call waiting and three-way calling service If you operate the machine during your use of the screw, the call is switched It might be. •

• Echo in a hands-free call When (reverberation) is anxious Through the vehicle speakers echo the other party's voice It is caused by that enters into the microphone to You. Voice from the speakers from entering the microphone Echo Reduce can in to ensure that no Vinegar. In addition, telephone line status, to use a mobile phone, Place the echo is generated by the other party of the environment There is also a case. Place where it is possible to reduce the echo in the following manner There is a case. To reduce the earpiece volume (→ "of navigation I set the volume. " (P111)) Speak with one keep breathing in each other A guide audio output of the passenger side of the speaker Set to learn (→ "a guide / Phone Speaker setting and "(P111)) However, the navigation inside the body of the echo canceller On the mechanism of, completely eliminating the echo You ca n't. Also, call the other party loud voice In addition it will difficult to hear and speak with. Memo Also adjust the earpiece volume in the call in the menu You can. (→ P181) Depending on the mobile phone, the place where some functions are limited There is a case. For more information, contact your dealer Please let. • • Received phone how When the call comes, the following telephone Message is displayed to guide the incoming, The sound of incoming information flows. Phone connection when you touch on, call You can be. •

• • Page 179

179 Use a mobile phone CRA4803-A Other operations Memo The sound of "To~ururururu" The phone will incoming Once sounding, to indicate an incoming call. In the part of the mobile phone, the ring tone from the speakers There may not be output. To match the phone number that has been registered in the registration area And, the name of that point will be displayed. Memory dial (→ P182) Registered If there is a match with the telephone number, registered in the memory dial Has been name appears (registered land and Memorida If the phone number of the dial is the same, of the registered location The name will be displayed). By usage of Caller ID service The telephone number and name of the person who has missing display It will not be. Also answer the call by pressing the mobile phone button You can. Even in response hold the mobile phone side, Touch to You can cancel the response hold by. Phone cut single-edged, "Operation of the call in the menu" (→ P181) Please visit. • • • • • • •

• When operating in the slide: During the phone call, and can be performed following the slide operation You. For details on how to operate the slide, "Scan Ride Operations " (→ P22) Please visit. → slide You can talk. ← slide Turn off the phone. Kake-kata of phone It is possible to make a call in a variety of ways You. One Press (menu), Mobile phones, cellular Story I want to touch on Memo If the Bluetooth device is not registered, prompting a registration A message will be displayed. Yes Touch to And then please register operation. (→ P106) • Two Touch on how to make a phone call Dial A phone call by entering the phone number Over you. (→ P180) Memory dial Mobile phones, cellular it is loaded into the machine The memory dial list of story The call to make the call. (→ P180) Call History When you connect the unit and the mobile phone Outgoing, incoming (including missed calls) To display the history that was, the phone You can apply. (→ P180)

Redial Li to the telephone number that was applied just before Dial. (→ P181) Bluetooth set to line the settings of Bluetooth devices There you. (→ P106) Memo Loading the memory dial of a mobile phone to the unit If not out, the memory dial can be selected No. During transmission, during a call, mark of the phone in the upper left of the screen Or call in the menu (→ P181) There is displayed You. • • Page 180

180 Use a mobile phone CRA4803-A Make a phone call by entering the phone number One Dialing touch the (→ P179) Two Enter the phone number, outgoing standing in Chisuru ▼ Phone is originated to the destination. Memo You can also dial a mobile phone. (By mobile phone, such become a hands-free It might have. ) • Call the memory dial Make a phone call Memo Memory dial a mobile phone that has been registered on the machine

It will be loaded each time. A mobile phone to be connected Change (→ P108) And, Memorida that is displayed Also it will change the contents of the dial. • One Memory dial touch the (→ P179) Two Touch to choose a destination Three Phone number that is included in the chosen destination Touch to select No. Four Yes I want to touch on ▼ Phone is originated to the destination. Make a call from the call history One Call History I touch the (→ P179) Two Touch and select the history you want to display Make ▼ The selected history will be listed. Three Touch to choose a destination ▼ Phone is originated to the destination. Page 181

181 Use a mobile phone CRA4803-A Other operations Make a phone call in the redial One Redial it touches the (→ P179)

▼ Outgoing confirmation message is displayed. Two Yes I want to touch on ▼ Phone is originated to the destination. Put a telephone number registered in the map phone number that is included in the retrieved facility information Power to issue or phone number that is registered in the registration area You can make a story. One Looking for a location (→ P55) of the facility I to display detailed information (→ P62) Two Outgoing touch the ▼ It will dial the phone number that has been registered. Operation of a call in the menu During a call, the call in the menu is automatically displayed Is, adjustment and hands-free function of the receiver volume Of ON / OFF, that performs an operation of turning off the phone You can. Close up Close the call in the menu. + It will raise the earpiece volume. It will reduce the earpiece volume. I hang up Turn off the phone. Hands-free ON (OFF) ON / OFF the hands-free function To you. And talking on a mobile phone Want time, you want to OFF. Memo If you OFF the hands-free function, this unit and the mobile If the wireless connection to the band call is disconnected I have. Close to close the busy menu Touch Case, the screen of the upper left

During a call when you touch the You can re-display the menu. You can also turn off the phone in the mobile phone. • • • Page 182

182 Use a mobile phone CRA4803-A Edit a mobile phone information Reading of the memory dial and erasing, each history You can perform the erasure. One Press (menu), Mobile phones, cellular Story I want to touch on Two Edit and erase I will touch on ▼ Memo Procedure One ~ Two In, setting and editing - Telephone and communication - mobile phone data editing to be operated by touching the Method is also available. • Edit and erase menu appears. Memory dial INCLUDED reading of memory dial Miya it will do the erasing. (→ P182) Outgoing history erase It will clear the call history. (→ P184) Incoming call history erase It will clear the incoming call history.

(→ P184) Missed call history erase and erase the missed call history turf Vinegar. (→ P184) Read the memory dial To use the memory dial function, the preMemory diamond registered in the phone Please keep reading to this unit Le. Book data of a maximum of 1 000 from a mobile phone You can load the machine. Memo Per 1 up to five telephone numbers can be saved. Depending on your phone, memory dial There are times when it does not correspond to the transfer. Name, and can read data telephone number You. Memory dial a mobile phone that has been registered on the machine It will be loaded each time. A mobile phone to be connected Change (→ P108) And, Memorida that is displayed Also it will change the contents of the dial. the read data coercive in memory of the camera built-in It is exist. able to edit the read memory dial it You ca n't. Method of erasing memory dial, "Memory diamond Erase Le " (→ P183) Please reference to. Mobile that you can register multiple phone numbers per person In the phone, depending on the registration status and the type of phone number Te, there are times when it can not be read all the data. • • • • • •

• • One Memory dial touch the (→ P182) Two Read I want to touch on Memo If you already have a data read, and overwrite Zan read or add read I will choose the Sai. • Page 183

183 Use a mobile phone CRA4803-A Other operations Three It operates the mobile phone, Memorida It will transfer the dial ▼ Memory dial will be loaded into the machine. Memory dial Li When loading is completed Return to the list screen, eyes the read data It can be used as memory dial It becomes so. Memo When performing the memory dial reading is connected Misao from phone memory dial transfer are Work (depending on the mobile phone, but the whole matter transfer, 1 Matter transfer There are, etc.) is required. PBAP connection (→ P106) Mobile phone that corresponds to the Case, read at the time of the touch, the mobile phone Without the side of the operation memory dial is read into the unit It will be written. A Depending on your mobile phone Indication of whether allow the access permission to the mobile phone side It will be displayed. Also in the case of the PBAP connection di It will be overwritten read in motion. Additional reading

You can not. When the memory dial transfer is completed, the additional reading Whether the message and take write appears You. If you read in additional, yes Touch to Please be. Conserved information of the type and number of characters, memory number Is, it will vary depending on the mobile phone. Sea of mobile phone by your mobile phone Memory diamond that has been registered by Klett function Also imported Lumpur. Own station number of the mobile phone also memory dial and simultaneous There are times when it is read in. • • • • • • It wants to erase the memory dial The child erase the memory dial that is no longer needed You bet you can. Memo Memory dial is clear that has been recorded in this unit Will. memory dial of the connected mobile phone side And historical information will not be erased. Erasable memory dial, connected to this machine It is only what you read from in a mobile phone. Contact Switch the connection to the mobile phone (→ P108) And, consumption Also switched the contents of the possible memory dialed You. While erasing the memory dial, memory dial machine Noh (→ P182) There can not be used. • • • One Memory dial touch the

(→ P182) Two Erasing I will touch on Three Touch the phone number you want to erase ▼ In the selected phone number, and (check mark H) marked with, you can choose continue. Memo Select All If you touch to all of the phone number is selected Is-choice. All release When you touch, is selected All telephone numbers are I will release. • Page 184

184 Use a mobile phone CRA4803-A Four Erasing I will touch on ▼ A confirmation message is displayed. Five Yes I want to touch on ▼ The selected phone number will be erased. Memo The erasing of the memory dial can take several minutes There. During the erasure of memory dial, OFF the power of the machine And Do not in (the engine switch OFF) There. There is a case where the selected data is not erased You. • • Erase the history information Outgoing call history, call history, the missed call history information You can be erased. Memo When switching the mobile phone to be connected, the Mobile phones, cellular Call history when using the talk is no longer displayed

Will. When you reconnect, it will be displayed again. If the registration of a mobile phone is deleted, its mobile Incoming and outgoing history when using phones, automatic It will be deleted. • • One Highlight the history items that you want to erase Touch (→ P182) Two Touch to erase you want history information ▼ In the selected history information, and (check mark H) marked with, you can choose continue. Memo Select All If you touch in all of history information is selected Is-choice. All release When you touch, is selected In history information has to release all. • Three Erasing I will touch on ▼ A confirmation message is displayed. Four Yes I want to touch on ▼ The selected history information is erased. Page 185

185 CRA4803-A Other operations Use eco Manager Acquisition, depending on the contribution of eco-driving confirmation of the (eco prize) can be animal images and Ekoun Rolling I will do history confirmation of evaluation. Also, fuel consumption setting for performing an eco route display Do you. One Press (menu), Ekoma Neja touch the

Two Touch to select the item Eco prize thumbnail image of eco prize It will display the surface. (→ P186) Fuel consumption set General road, the fuel consumption of the high-speed road and its Re you set respectively. (→ P186) Eco-driving evaluation History Latest eco luck and past 9 minutes It will show the rolling evaluation history. For eco-driving evaluation In the eco-driving evaluation screen, sudden acceleration eco-driving, Rapid acceleration, sudden deceleration, cruise, idling state Evaluated in five stages from, the advice of operation Do you. Screen, eco-information display of map It will be displayed when the display. (→ P42) If you are driving by reference to the eco-driving evaluation, Do not watch the navigation screen, luck can be safely care Please be rolling death. • Memo It is calculated from the speed and elapsed time. Sensor Such as when in the initial learning, the vehicle speed is not calculated There are times when it is not calculated correctly in the state. → "Navigation Works" (P204) Eco-driving evaluation by the traveling environment, such as steep road Because there are times when it is low evaluation, rather than acknowledge Please. Point pressurized depending on the number of eco-driving evaluation It is calculated, the acquisition level of eco prize is Kemah Ri you. For more information "About Eco Prize" (→ P186) Please visit. •

• • Evaluation is carried out on a daily basis, the date is changed latest Eco-driving evaluation of will be added stored in the history. To If history is 9 to in, the oldest history It will be deleted. Eco Money To check the history In jar screen eco-driving evaluation history Touch Give me. In the following cases, the eco-driving evaluation screen appear To do. Intersection guidance in display (→ P71) Lane information, in the direction signboard display (→ P70) Sensor initial learning in (→ P98) • • Page 186

186 Use eco Manager CRA4803-A Eco prize The poi cumulative results of eco-driving evaluation until the day before The cement was converted, the level of the field that corresponds to the point It will display the image. Eco prize thumbnail screen Thumbnail Image detail image of the selected thumbnail image It will display the surface. (→ P186) > Eco prize thumbnail image It will send to the previous page / next page. Memo Have points of eco-driving evaluation has reached the level

Image is not ? Appears in the display, touch eco Prize detailed description message appear Vinegar. Depending on the image acquired in the eco prize, and Per "User icon", "Beep" of Sonaraizu, It can be set in the "induction icon". Personalized For more information about the Izu, "The personalization features To use " (→ P187) Please visit. • • Eco prize detail screen Go back Eco prize thumbnail image It will return to the surface. You want to fuel economy setting Ordinary road, and it sets the fuel consumption during highway driving You. Content is eco-friendly route that was set here Display (→ P65) It will be reflected in the. One Fuel consumption setting touch the (→ P185) Two General road mileage or highway Fuel consumption touch the Three Enter the fuel consumption, input end standing in Chisuru Example: General road fuel consumption Memo Fuel consumption of the guideline has entered the factory. Input Fuel consumption which forces customers to make yourself check the dealer, etc. Please enter the fuel consumption was. In addition, the actual traveling In road conditions, season, each use, such as how to drive Since the fuel consumption may be different in the situation, the selected It roots and is necessarily eco-friendly route Not necessarily.

• Page 187

187 CRA4803-A Other operations Use the personalization features And personalization features, in the case where the unit to become used with more than one person, such as among family members, and use Person (owner, user) different settings by your favorite (map display and volume settings Etc.) and it is also possible to separately registered, by switching the user, the original configuration It is a function that allows you to use the machine. The user can register up to 4 people (owner one person, user 3 persons). (Owner It has been pre-registered. ) Selected as the current user is the owner or user (1-3), the map screen lower right It is displayed as a user icon to. Memo It is not possible to remove an owner. However, you can set and edit the owner information. When you register a user 1-3, when the power of this machine was to ON (ON the engine switch), registered users It looks like selection screen is displayed. If the user contact one person only, to set and edit owner information You. • • Show personalized screen Make Personalized screen, and display of the operation history And selected, the user registration and set-cutting You can do such as recombination. One The user icon on the map screen Touch ▼ Personalize screen appears. ★ The operation history of being selected to ★ mark But it appears, a favorite

It is registered Te. My favorite Registered operation history as It is always displayed at the top of the list It is. Again ★ to be touch That when the ★ mark goes off, the Favorites Registration will be canceled entered. List items Table operation history of the past 30 minutes It is shown. the selected operation You can run. Settings User setting It can be set for each user Vinegar. (→ P188) Settings Erasure of history You can erases all of the operation history. User switching new registration and cut of the user Instead, you can delete. (→ P191) Memo Operation history that is not registered in the favorites, More than 30 reviews and will continue to be overwritten in the old order You. Favorites registration, you can register up to 30. If you do erase history, all of it except for the favorite Operation history is erased. • • • Page 188

188 CRA4803-A Setting the User Settings and the navigation map display method for each user Me you can, such as volume settings of Geshon. One Settings - User Settings and touch

and (→ P187) ▼ User Settings screen appears. Icon Set the user icon You. (→ P188) User name You set the user name. (→ P188) Volume You set each volume. (→ P189) Beep change You set the operation sound. (→ P189) Input keyboard keyboard set at the time of character input It is a constant. (→ P189) Character expansion of map ON / OFF of character expansion of map I set. (→ P189) Map view Set the display method of map You. (→ P190) Logo A logo to be displayed map Set you. (→ P190) Induction icon Induction icon to display map You set the pattern. (→ P191) Setting initialization Factory settings to initialize It will return to the state at the time. Two When you are finished, end standing in

Chisuru You want to set the user icon User icon or 20 kind of icon I can et al setting. The factory is the "pattern 1". One Icon I want to touch on (→ P188) Two It will touch on your favorite icon Memo Icon acquired in eco prize (up to 12 species You can also set Louis). Eco prize For, more details "About Eco Prize" (→ P186) Please visit. • You want to set the user name You can set the user name of your choice. Maximum Input number of characters is double-byte 7 characters. The factory "owner" or "user (1-3) is. " One User name you will touch on (→ P188) Two Enter your user name, input end It will touch on Use the personalization features Page 189

189 CRA4803-A Other operations Set the volume Ringtone of navigation of the guide volume and phone The adjustment of the amount and the receiver volume, the ON / OFF of the operation sound You can set. One

Volume to touch the (→ P188) Two Set each item Memo Setting operation of volume, "I set the volume of the navigation A constant " (→ P111) This is the same as for. • You want to change the operation sound The ringing when you touch the button on the screen and body That you can set the operation sound. The factory default is "BEEP 1". One Beep change it will touch on (→ P188) Two It will touch on your favorite operation sound Sound sounds when you touch to the list item, sure You can be sure to. Three Back to Touch Memo Set the operation sound that was acquired in eco prize child And I can also. Eco prize, and in detail The "About Eco prize" and (→ P186) It is Goranku Please. • You want to set the input keyboard Two types of input palette (keyboard-type input Be performed by selecting from the mobile type input) and You can. The factory is "50 sound input". One Input keyboard you will touch on (→ P188) Two 50 sound input or mobile phone input

It will touch on Three Back to Touch It will expand the character information of the map Statement of place names and facility name to be displayed on a map screen You can to enlarge the character. The factory is "OFF". One Character expansion of map you want to touch on (→ P188) Use the personalization features Page 190

190 CRA4803-A Two ON or OFF touch the Three Back to Touch You want to set the display method of map You can set the display method of the map. The factory is "normal view". One Map view I want to touch on (→ P188) Two Normal view or Sky View I want to touch on Three Back to Touch You want to set the display of the logo Child to display the logo of the facility on the map You bet you can. The factory is as follows. Display: "ON" Display Type: "0 Type" One Logo I want to touch on (→ P188) Two Full list I want to touch on

Memo Here return to the map screen when you touch to the genre Ri, all the facilities of the selected genre on the map It will be displayed. List customize according to your taste You bet you can. (→ P45) • • Three Ja you want to display the logo Touch the Nru Four Facility you want to display the logo It will touch on ▼ Indicator of the selected facility lights is, you can choose continue. Use the personalization features Page 191

191 CRA4803-A Other operations Memo When you touch the facility again, the indicator consumption The lights will be deselected. To select the other genres of facilities, to return Touch the Procedure Three Returning to the screen, the procedure Three ~ Four Repeatedly to Give me. The display setting display: OFF in the case of, the display: OFF Display: ON by touch, change the display settings Give me. • •

• Four Back - Back - Back Touch to Make Memo Logo display setting operation, "Logo You want to display settings " (→ P44) This is the same as for. • Set the induction icon Set the induction icons such as destination and stop-off place You can. The factory is the "pattern 1". One Induction icon I want to touch on (→ P188) Two It will touch on the pattern of your choice Memo Icon acquired in eco prize (maximum three You can also set Louis). Eco prize For, more details "About Eco Prize" (→ P186) Please visit. • User switching menu I use You want to register a new user A user other than the owner, user 1-3 You can register to. Memo If the user already 1-3 registered, new I can not Tadashi registration. A registered user Delete (→ P192) Please operate it from death. • One

User switching touch the (→ P187) Two New registration I will touch on ▼ User Settings screen appears. Three To the user settings (→ P188) Four End it will touch on Memo When you make a new registration, after registration is completed as it is current It is selected as the user of the standing. • Use the personalization features Page 192

192 CRA4803-A Switch the user Settings for each registered user value and operation footwear To use the gravel, you can switch the user. One User switching touch the (→ P187) Two Touch to users who want to switch Make ▼ to switch to the selected user. You want to delete a user The child Delete registered users than the owner You bet you can. One User switching touch the (→ P187) Two User deletion it will touch on Three Touch the user you want to delete ▼

A confirmation message is displayed. Four Yes I want to touch on ▼ The user is deleted. Memo It is not possible to remove an owner. If you erase the user's currently selected, automatically Owners will be the selected state. • • Use the personalization features Page 193

193 CRA4803-A Other operations Use a smartphone cooperation function Using the smartphone, the operation of the map (change of scroll or scale) and destination Setting, you can make the operation of the audio. Memo In order to use this function, the smart a dedicated application (NaviCon or smart nAVVi Link) You will need to download the Tofon. For information on setting up and usage of smartphones, and App Please refer to the help of Store or Google Play. After preparation of the smartphone side is well-equipped, set to use the smartphone cooperation function with this unit and the Bluetooth connection Please be a constant. → "do Bluetooth Settings" (P106) When the setting is complete, the smartphone cooperation mark is displayed at the bottom of the screen. : Registration and set to the unit of the smartphone has been completed. : Smart phone is connected. (Android smartphone will not be displayed) : Connect the smartphone is complete, it is cooperation with the machine. It does not allow operation of this function from the smartphone in hands-free connection while driving. For the connection corresponding smartphone, please contact your dealer.

Depending on the version up of a dedicated application, you may actual function is manual and different. • • • • • • Note Please use always fixed smartphone. Rolling during traveling, and enters the bottom of the brake pedal And it is very dangerous. The place to be in the way of to become the location and visibility interfere with the operation when the safety device of the car, such as an air bag worked Please do not fixed. Please do not leave the passenger compartment smartphone. (Such as the scorching sun, there are times when the passenger compartment becomes a high temperature.) Please do not use as close to the machine the smartphone. If it is too close, connection state child worsening There is a door. • • • • Use NaviCon app Caveat For safety, the driver smartphones while driving Please do not operate the emissions. • One By operating the smartphone Start NaviCon app, ground You want to display a figure screen ▼ Connecting to this unit is carried out in automatic, NaviCon Map at the same position with the map that is displayed in the, It will appear in this unit. Memo Place that is not the map display depending on the state of the navigation screen There is a case. Map scroll, works also the scale of the change.

Android smartphone, own NaviCon when the dynamic connection settings are disabled It is not automatic connection. Na is automatic connection If you win, you will conduct a manual connection operation Sai. NaviCon method of operation at startup, application Please refer to the emissions of help. • • • • Two By operating the NaviCon app Setting the destination or stop-off place ▼ Configuration information is sent to the machine, the objective in this machine Ground and stop-off place settings are done. Page 194

194 CRA4803-A Memo In the search result screen of this machine guidance start without touching the To, when newly send the destination, it is displayed That search results are canceled, new route It is searched. If you set multiple destinations in NaviCon, this unit In point 1 is the destination, point 2 or later and place stop-off And then it will be set. Ascending from the stop-off place point 2 It is set as close stop-off place in the destination. • • NaviCon app you can be downloaded from the following. http://www.denso.co.jp/ja/products/ aftermarket / info / navicon / index.html This application will provide DENSO. smart nAVVi Link apUse the reCaveat For safety, the driver smartphones while driving Please do not operate the emissions.

• One By operating the smartphone the smart nAVVi Link app Start ▼ Connecting to this unit will be performed automatically. Subsequent operations, "the destination setting" and Refer to "the audio operation". Memo The smartphone appli- depending on the state of the navigation screen There are times when it does not work in conjunction with the re. Android smart phones, smart nAVVi Link If the automatic connection settings have been disabled It is not automatic connection. Not automatic connection If was, please manually connect operation. smart nAVVi Link startup method of operation, apPlease refer to the publication of help. • • • smart nAVVi Link app downloaded from the following You can do. http://smartnavvilink.com/ This application, Aisin AW Co., Ltd. It offers. Make the destination setting One and Misao a smart nAVVi Link app To enter the destination search mode by work Two the smart nAVVi Link app Set of destination or stop-off areas by operating It will be a constant ▼ Configuration information is sent to the machine, the objective in this machine Ground and stop-off place settings are done. Memo When you send a stop-off place in the absence of destination, purpose It is set as the earth. In the search result screen of this unit guidance start without pressing the,

When newly send the destination or stop-off place, it is displayed In which search results are canceled, newly Lou It will be To search. • • Use a smartphone cooperation function Page 195

195 CRA4803-A Other operations Make the audio operation One the smart nAVVi Link app The operation to audio cooperation mode I go to Two Li smart nAVVi Link app In remote control screen, the audio operation Make ▼ Operation signal is sent to the machine, Misao of each function Work you can. Common remote control AUDIO OFF AV source is turned OFF You. MODE It switches the AV source in order You. DISC Music CD and CD-R / RW, etc. It will play. TV It receives the one-segment broadcasting You. VTR You can not operate on this unit. △ Folder / Album Folder / album / ing

Loops and presets tea I will up the tunnel. ▽ Folder / Album Folder / album / ing Loops and presets tea I will down the tunnel. △ Track Track / file and preAnd met the set channel You flops. When you long touch, fast-forward I play. ▽ Track Track / file and preThe Dow set channel You down. When you long touch, and rewind I play. + Volume Volume will increase. - Volume Volume will decrease. Memo When the AV source touches to OFF at MODE, It becomes AV source prior to the AV source to OFF You. AV source is long touch to ON at MODE And, AV source is turned OFF. • • DTV remote control d You can not operate on this unit. 1-12 A preset channel And tuning. △ ch Preset channel I will up. Track Click / files I up

Thing I can. ▽ ch Preset channel I will down. Track Click / files I down Thing I can. + Volume Volume will increase. - Volume Volume will decrease. ← → ↑ ↓ decision You can not operate on this unit. Data broadcasting Misao Create key (Blue / red / green / yellow) You can not operate on this unit. Use a smartphone cooperation function Page 196

196 CRA4803-A Adjust the touch position of the touch panel For example, when you feel a shift in the touch position that actually react with the touch key on the screen to adjust to Rukoto I can. (Touch panel calibration) And 4-point adjustment to be performed on the screen four corners in the adjustment, there is a 16-point adjustment to be performed in detail in the whole screen. Please touch lightly on the screen using the ones that are not always pointed tip of a cotton swab. • Memo When ending the touch panel adjustment midway, long press (menu) or (current location) or (O Please press the audio). If you press, to return to the screen of the navigation, If you press, It will return to the AV screen. • One (Menu) press for more than 2 seconds ▼

Image quality adjustment screen (→ P25) There will be displayed. Two Remains of image quality adjustment screen (Menu) press for more than 2 seconds ▼ Touch panel adjustment screen appears. Three Touch the four corners of the screen Four And press (menu) ▼ Adjustment results are saved. Five Press again (menu) ▼ It will go to the 16-point adjustment. Six Among the + mark displayed on the screen Touch the heart ▼ After 16-point touch, and is displayed on the screen + Marr When you touch the clock, the adjustment result is saved You. Memo Please do not turn off the engine during storage. To return to the previous adjustment, the (Menu) Press Please be. • • Seven (Menu) press for more than 2 seconds ▼ Exit adjustment and displayed before performing the image quality adjustment It is to return to the screen had. Memo If the touch panel adjustment can not be performed properly , Please consult your dealer. •

Page 197

197 CRA4803-A With Recording Handling Precautions Correct how to use the LCD screen Handling Precautions If you put a commercially available liquid crystal protection film, touch It may be detrimental to the operation of the panel You. LCD screen should use it within a specified temperature range There. (→ P222) Be used for a long time in a state in which the direct sunlight Once, a fear that it becomes high temperature, the LCD screen fails I have. direct sunlight as much as possible Please do not. LCD screen, in order to improve visibility in the car It has become exposed. The failure to fear Since there will, without pressing strongly LCD screen Give me. Since it becomes a cause of scratches and dirt, liquid crystal image When you touch the surface, and make sure that you touch with your fingertips Sai. About the LCD screen The shiny little black dots or bright in the LCD screen You may leave a point (bright point). Is this, This is not a malfunction on the LCD screen of the peculiar phenomenon. If the direct sunlight on the LCD screen, the light reflection It is because it becomes difficult to see the screen, direct sunlight Please block the. If the ambient temperature becomes your in a low situation The characteristics on the afterimage of a liquid crystal is easily noticeable There is the image quality is degraded. Ambient temperature If the Takamare to return to normal image quality. • • • • •

• • • For LED backlight Model summer and scorching sun, the warm air of the air conditioner directly Monitor part is a high-temperature state When Nita part When to become, for the LED protection, automatically backing You may narrow down the brightness of the krait. The life of the LED backlight is 10,000 hours or more But, life is short when it comes to your under high temperature There are times when it becomes. When the LED backlight is the life, the screen It can become dark, or no longer picture appears You. At this time, where you will find your dealer Please contact us. Cleaning Dirt of dust and LCD screen attached to the LCD screen And from when to cleaning, turn off the power, soft Please be wiped from the lower clean cloth. When you wipe the LCD screen, it does not scratch with claws Please note strangely. The trees on the LCD screen Figure is attached video will difficult to see. Do not use wet cloth or chemically treated cloth Please Do not. In addition, benzine and thinner The Do volatile chemicals are not used, such as Sai. Disk of the correct How to Use Handling Precautions The use Kedah the disk marked with the following mark Sai. CD Using cracks, scratches, and a sled disk Please do not. Disk of special shape, you do not want to use in Kedah Sai. This may cause a malfunction. When holding a disc, shining on the recording surface (iridescent Please do not touch the surface) to have. Please do not scratch the disc. • •

• • • • • • • • • Page 198

198 CRA4803-A Use a disk that can be printed on the label surface to time, instructions and notes of disk Please check. Depending on the disc, There are things that can not be inserted or taken out You. The use of such disks, It may cause a malfunction of your camcorder. The disk, One stuck a commercially available label Please do not only. Warpage occurs in the disk Te, it can cause you can not be reproduced. Or It was, when the label is peeled off during playback, disc Clause no longer be taken out, the cause of the failure of this unit It will be. Memo Although we are conscious on the product design, and walk on the mechanism Due to the handling of the usage environment disk, Scratch degree no practical use hindrance to the disk surface You may have to stick. In this, the product failure It is not. The faster your understanding as a general exhaustion Please. The kinds of disc that can be played or file format Etc. For The "Types of Playable disc" (→ P200) Please visit. • • Cleaning When the disc is dirty, soft and beautiful

In such a cloth, and from the inside of the disc to the outside Please wipe lightly Te. To disk, volatile such as benzene or thinner Please do not put the departure of the chemicals. In addition, The disk, for analog phonograph record Cleaner, do not use such as antistatic agent Please Do not. Precautions storage Disk, hit the place and high of direct sunlight Where you become hot, please do not keep. So the disk is not empty, always the case Please keep it put. • • • • • • For disc playback of environment The data on the disk is exactly in the vibration while driving You may not be read. The disk immediately after the low temperature at the time, was placed in a heater When you start playing, of inside the unit lens and di With a dew to the disk, it can not be normal playback There is a thing. In such a case, 1:00 During the more is left to you wait until naturally take the dew Chikudasai. Dew attached to the disk is soft Please wipe in the stomach cloth. Work is the protection function becomes hot, disk reRaw stops. Right on using the SD card Handling Precautions Hit the place and Toko to become high temperature of direct sunlight Roniwa, please do not keep. and bend, you can give a shock, it can not drop Please do not. This may cause a malfunction. Please do not touch with wet hands. Failure of the original It becomes cause. The terminal portion Do not touch the metals and hand There. This may cause a malfunction. Protection of data

The important data that has not been backed up When etc. are stored, write protection Extract (write protection) slide the switch Please to LOCK by. • • • • • • • • Handling Precautions Page 199

199 CRA4803-A With Recording Notices radio waves This unit is small power data communication is based on the Radio Law Shea As stem radio station equipment, technical standards Conformity Certificate We have received a light. Therefore, using this machine A radio station license is not required when you want to It does. Also this machine can be used only in Japan You. That you do the following matters to be punished by law I have. The decomposition / remodeling that. And peel off the certification label that is attached to the machine Thing. Wireless functions of this machine, the frequency band of 2.4 GHz I hate the radio waves. This frequency band Of radio waves various equipment (microwave oven, no Line LAN equipment, etc.) is No uses In, due to the interference of radio waves, the wireless functions of this machine Child it becomes difficult to voice it is heard or interrupted There is a door. In addition, the Ya operation of other equipment It can affect performance. This In the machine less susceptible to interference method But, please note the following contents.

AV equipment and security utilizing a wireless LAN In an environment that is using such equipment, the unit If you use the wireless feature, choppy voice, A significant impact on the operation of the wireless LAN equipment It may give. Other, also in the following equipment, 2.4 GHz of the frequency There are those that use radio waves in several zones or Vinegar. In the vicinity of these devices, voice abrasive It can be, it may become unusable. Or It was, to affect the operation of the other device I have. Fire alarms, wireless AV equipment (hand Levi, video, computer, etc.) Logistics management systems, such as factories and warehouses, Railway vehicles and the emergency vehicle identification system Microwave therapy equipment, game machines of the wire Les controller Automatic door electronic article surveillance (bookstore Such as, CD shops) • • * * • * • * * * * Automatic control equipment and other, Bluetooth ® Versus 応機 instruments and VICS (road transportation network system) Amateur radio stations, etc. ①②③ ① the radio equipment that uses the "2.4" GHz band It represents you. ② "FH" it represents the modulation scheme. ③ "1" envisioned and interfering distance (about 10 m) It represents the.

Specified low-power radio stations for mobile identification from this unit Cases of harmful interference occurs against When that occurred that troubled something you like if was , Please contact your dealer. * * Handling Precautions Page 200

200 CRA4803-A About disk Type of disc that can be played The following mark, title surface of the disc, package Cage or I am attached to the jacket,. CD CD-EXTRA, the child playing as a music CD You bet you can. With copy guard function CD (Copy Control CD, etc.) does not conform to the official CD standard Therefore, you may not be able to play. Other than those recorded in music CD recorder CD-R / RW discs are able to play successfully You might not. CD-RW disc, insert the disc From before playback begins, normal CD or CD-R There is a case where time than disk-consuming You. CD-R / RW that has not been finalized Disk, or if the playback you can not play It may take some time to start You. For more information about the handling of CD-R / RW disc, Disk of instructions and note the read enough you Give me. DDCD recorded in (Double Density CD) format Sound has been CD-R / RW disc playback can To do. For music that was recorded in the music CD recorder In CD-R / RW disc, and characteristics of the disc

And scratches, dirt, or the lens of the present inside the unit, Due to dirt, dew, do not be played on this unit It might have. Such as direct sunlight or high temperatures, storage conditions in the car By, it may no longer be reproduced You. Recorded disk in PC (personal computer) is a positive Those that have been recorded in the Shii format playback can you, but the set of application software If you can not play such as by Joya environment I have. (For more information about the application Contact Kedah to tion software publishers Sai. ) • • • • • • • • • • This machine, music data (CD) and WMA / MP3 Any data (CD-R / RW) are mixed To have to play the disk I support But data reproduced music data (CD) Only it becomes. The configuration of the disk CD, a disc in units of track It divides. In general, 1 songs corresponding to one track It is doing. Moreover track index In some cases, it has been divided by the unit of scan You. Track 1 Track 2 CD Track 3 Track 4 Track 5

• Page 201

201 CRA4803-A With Recording For WMA / MP3 / AAC / WAV file Folders and WMA / MP3 / About AAC / WAV file Disc that was recorded the WMA / MP3 files Click or, WMA / MP3 / AAC / WAV file Below is the image in the SD card was recorded It looks like Figure. 1 Tier 2 Tier 3 hierarchy This machine recording of the WMA / MP3 files The CD-R / RW (CD-ROM mode Mode 1, Mode 2, FORM1, FORM2 In correspondence) and, WMA / MP3 / AAC / WAV reproduction of the SD card which the file was recorded I supports. Disk, level 1 of ISO9660, Contact And level 2, and extended format (Joliet, Romeo) is recorded in accordance with The disk is playable was. This machine was recorded in multi-session method It supports the playback of a disc. It does not support packet writing. Now in response to the play list of m3u To do. MP3i (MP3 interactive) format, And corresponding to MP3 PRO format It has not. • • • • • • • The total number of folders that can play a maximum

192 (in the case of CD-R / RW) / 300 (SD It is a case of). The total number of files that can be played, the maximum 255 (in the case of CD-R / RW) / 5 000 (SD It is a case of). In accordance with the extended format (Romeo) In the case of recorded files, and earlier in the em 28 characters from the head, in the half-width from the top 56 It is corresponding to the display of up to characters. Folder is selected in the operation, such as playback That order is included to write in writing software Mareta it will order. However, Lighty Depending on the ring software, set the order of play There are also things that can be constant. Memo Folder numbers are assigned this unit. Customers Like it is you can not assign. Do not include the WMA / MP3 / AAC / WAV file There folder does not recognize (folder number Without the display, and then skip). The disk with many of the hierarchy, playback begins or It takes time to in. When creating disk, It is recommended that to the hierarchy to two or less. The sum of the folder that is included in the disk 192 It is renewable up to pieces. • • • • The WMA? The WMA, "Windows Media ™ Audio" It stands for, in the United States Microsoft Corporation Therefore it is an audio compression method has been developed. WMA data, Windows Media Player It is encoded using the Ver.7 later I can. Memo Application that was encoded WMA files Some tion, it is not working properly and Kotogaa Ri you. Application that was encoded WMA files

Some tion, and character information, such as the album name There is that will not be displayed correctly. • • • • • • Page 202

202 For WMA / MP3 / AAC / WAV file CRA4803-A To WMA files that can be played About Memo When you name the WMA files, and files Please with the extension (.wma) after the filename. File this unit, the extension (.wma) are attached It will play as a WMA file. Noise Ya It will be the cause of failure, WMA files or more Please do not put the extension (.wma) to the outside. In this machine, Windows Media Player Ver7 / WMA files that were encoded using the 8/9 You can play the. Play the WMA file that contains the image data If, it can take a long time before playback begins There. • • • • As album (album name of WMA Tag Display), title (displayed as a song title), artist (Display as an artist name) displayed in a pair of We respond. Sampling of playable WMA files Ing frequency is 32 kHz ~ 48 kHz (CD-R / In the case of RW) / 8 kHz ~ 48 kHz (SD of It is the case). Corresponding bit rate is 4 8 kbps ~

320 kbps (the case of a CD-R / RW) / 5 kbps It is ~ 320 kbps (the case of SD). The pair in VBR We respond. It is protected by digital rights management (DRM) You can not play the file. All place the files are protected by DRM If, you can not play in this machine. It does not correspond to the following format. · Windows Media Audio 9 Professional · Windows Media Audio 9 Lossless (Lossless compression) · Windows Media Audio 9 Voice • • • • • And MP3? MP3 and is, of "MPEG Audio Layer 3" It stands, standard Four on voice compression technology Matt. in can be played MP3 file About Memo ITunes of you encode MP3 files Depending on the version, the characters, such as file name There is that information is not displayed correctly. When naming an MP3 file, and file Please with the extension (.mp3) after the name. File this machine, that with the extension (.mp3) It will play as MP3 files. Noise and late It can cause disability, other than the MP3 file Please do not put the extension (.mp3) to. • • • ID3 Tag of the album (as the album name Display), title (displayed as a song title), artist (Display as an artist name) displayed in a pair of We respond.

Version of the corresponding possible ID3 Tag is 1.0, 1.1, 2.2, 2.3, 2.4. In addition, ID3 Tag of Ver.1.X and Ver.2.X are mixed If you have that is, Ver.2.X takes precedence. Corresponding sampling of playable MP3 files Ing frequency, 16 kHz ~ 48 kHz (CD-R / In the case of RW) / 8 kHz ~ 48 kHz (SD of It is the case). It supports the emphasis. The corresponding bit rate is 8 kbps ~ 320 kbps It is. VBR to me support. • • • • Page 203

203 For WMA / MP3 / AAC / WAV file CRA4803-A With Recording The AAC? The AAC, and "Advanced Audio Coding" Stands, sound is used in MPEG2, MPEG4 in This is the standard format for voice compression technology. To AAC files that can be played About Memo ITunes of you writing the AAC file Depending on the version, the characters, such as file name There is that information is not displayed correctly. When you name the AAC files, and file Please with the extension (.m4a) after the name. This machine, the extension that has been created in iTunes (.m4a) as AAC files a file that is attached Play. The No cause noise or failure In, other than AAC file extension (.m4a) Please do not put. A place to play the AAC file containing the image data If, it takes time before playback begins Kotogaa Ri you.

• • • • Table as album (album name of AAC Tag Shows), title (displayed as a song title), artist (ah In response to the display of the display as Tisuto name) There you. ITunes have to encode the AAC file Depending on the version, it is played correctly You might not. Playable AAC files of sampling Frequency is 8 kHz~48 kHz. Corresponding stereo bit rate is 8 kbps ~ Is 320 kbps. This product corresponds to the form of the following No. * Apple Lossless • • • • • And WAV? The WAV, It stands for "Waveform", Windows ® This is the standard audio format in. The WAV file that can be played About Memo When you assign a name to the WAV file, file Please with the extension (.wav) after the filename. File this unit, the extension (.wav) are attached It will play as a WAV file. Noise and late It can cause disability, other than the WAV file Please do not put the extension (.wav) is in. • • This unit has been encoded in LPCM format It supports playback of WAV files.

This unit of 16 kHz ~ 48 kHz sampling Rhino recorded WAV files in ing frequency Raw it supports. Generally WAV files, quantization bits The higher the number, the better the sound quality is. This Machine is recorded in the number of quantization bits of 8/16 bit It has been to support the playback of WAV files You. However, it is easier to music at a certain sound quality The Shimutame, the higher the number of quantization bits It is recommended that you record. • • • Page 204

204 CRA4803-A how the current position is found In this machine, the better to positioning the current position (vehicle position) In addition to GPS, modulo, and measurement by autonomous navigation Much is possible. The positioning by GPS Electricity for position measurement from the GPS satellite (satellite) System that receives the wave, and measures the current location There GPS (Global Positioning System: It is a global positioning system). GPS satellites around the earth advanced 21 000 It has been launched in km. Three or more Upon receiving a radio wave of the GPS satellite, positioning is possible It will be. The positioning by the GPS, three-dimensional There are two types of positioning and two-dimensional positioning. Type Content And receive the radio waves of three-dimensional positioning GPS satellite in good condition When you can trust is, latitude, longitude, and It can positioning with a high degree of three-dimensional. To be able to receive radio waves of two-dimensional positioning a GPS satellite Also, is not very good reception state The time, measured in a two-dimensional latitude and longitude Place to. Altitude it was not able positioning

Eyes, and positioning than in the three-dimensional positioning Error of is slightly larger. The positioning by autonomous navigation Built-in 3D hybrid sensors, ran The distance from the car of the vehicle speed pulse, crooked and who In the counter-vibration gyro sensor, the slope of the road surface In an inclinometer (G sensor) detects each Te, it is indexing the current location. Features of positioning that combines GPS and dead reckoning And the current location of the data by GPS, dead reckoning Always combining location data by In order that, to perform more highly accurate positioning Thing I can. Electric wave of the GPS satellite can not be received Also it is followed by positioning the autonomous navigation You can. Alone positioning by autonomous navigation, of You are here the display may come shifted gradually or Vinegar. The combination of GPS and dead reckoning, Fix the deviation of the autonomous navigation by GPS positioning Since it is possible to, the positioning accuracy is high Will. To enhance positioning accuracy Mechanism The role of 3D hybrid sensor Built-in 3D hybrid sensors, self-reliance In order to increase the positioning accuracy of the navigation itself, a high precision It is utilized in degrees 3D hybrid system There you. High precision 3D hybrid system When the vehicle speed pulse is input, the 3D And Ken the altitude difference by hybrid sensor The ability to leave, or enable highly precise positioning is To (high-precision 3D hybrid system). • • • Navigation mechanisms Page 205

205

CRA4803-A With Recording Map matching Error is raw in the positioning by GPS and autonomous navigation Because there is a thing Jill, it is here is in addition to the road It may become. In such cases, "car I believe that those running on the road ", the current location is near A map-match function to modify to Kuno on the road It is the ring. If you map matching In this machine, a high accuracy GPS and dead reckoning Map matching is work on where the positioning Because, it enables more accurate location display You. Memo Even if the road is displayed at the city map, and the The Mappuma~tsu the road to route search or the road You might not be able to quenching. • About error When the following situations, the error is it big There is Rukoto. The error caused by the GPS positioning disabled When you are in the following locations, GPS satellite Can not be received radio waves of the star is blocked Therefore, it can not be positioning by GPS I have. Between the dense trees Highway of two-layer structure Under the The Ya in the tunnel Building parking Crowd area of high-rise buildings • The following cases, and under the influence of electromagnetic interference, Do not be temporarily receiving a radio wave of GPS satellite You may Kunar. - The car phone Ya in the vicinity of the GPS antenna We're using a mobile phone. The wax of paint and car GPS antenna

Please do not painted a. Sensitivity is reduced Or, you can not receive radio waves There. Also, the product is snow on the antenna That and the sensitivity will be reduced, and snow removal Give me. The error caused by the GPS satellite itself GPS satellites are managed by the US Department of Defense it is has been, satellite itself is a deviation intentionally Position data may be transmitted between Vinegar. Such error of positioning is large when such I will listen. Capture small number of the (receive) can be that satellite Itoki, the error is large to become a two-dimensional positioning Masu no longer. For the error of a fee-flyover And when you get on and off the toll road, flyover, When traveling the road of the crossing, the gradient the detected to do the distance correction. Gradient data The roads but not recorded, do not be corrected It may damage error increases. For the vehicle position accuracy at low speed The car at the time of low speed of a few km / h depending on the type of vehicle There are those that speed signal is not output. Its In such models, congestion in and parking (underground stationed Followed by a low-speed running of the order of a few km / h in the car park, etc.) And, Kotogaa the vehicle position is not accurately display Ri you. • • • • Navigation mechanisms Page 206

206 CRA4803-A We ran the angle of the small Y-shaped intersection Case. The straight lines and gentle curve, Shortly after that I ran long distance. Gravel roads and snow-covered road, etc., Thailand

If ya have slip. If you have a meandering operation. Such as steep mountain road gradient, high and low If you ran the road with a difference. When fitted with a chain And, in the tire of a different size If you replaced. • • • • • • In such as parking, turn And carried out the turning of the table Case was. Hairpin curve was followed Case. If the road is close (Such as a toll road and the side road). Turning and cutting, etc. multistory parking garage If you have repeated returns Ri. It does not can positioning by GPS If stomach state lasted long. It passed through the loop, such as Bridge Case. • • • • • • The new road is not the map information If you ran. Such as ferries and vehicle transporters If in you move. Congestion, etc., and Ya start at a low speed If you have repeated the stop. We ran the grid pattern of the road Case. The road in the facility, such as a factory

Running, road adjacent to the facility If you are close to the road. And run quickly over the engine If you began to row. Different tire of aspect ratio and size If it is not long in exchange. • • • • • • • For other error Navigation mechanisms Page 207

207 CRA4803-A With Recording Failure kana? If you think Before requesting repair, please check the following content. The repaired even if the check If not, please consult your dealer. Common items Symptom Cause Treatment "Cis that it detects a high or low temperature It will pause the tem. Until the return Please be patient. Message that " Sage is displayed. Air conditioning vents Such that it has installed near But because, navigation The internal temperature of the body down high Kumata was lower. Until the temperature to operate normally Please wait. The return to the normal temperature And that, [whether high or low temperature state

Luo system is ready for operation It has returned. ] And it will be displayed. Message referred to as "running can not be operated." Sage is displayed. It can not be operated while driving It was operated the function. Some features, Misao while driving for safety It does not allow you to work. Safety Parking brake in stop at a place Please operate it from over the trees. Navigation Symptom Cause Treatment You can not positioning the vehicle position. Positioning error is large. And shielding the radio waves on top of the GPS antenna We have things at that. Do not put anything on top of the GPS antenna Please Do not. 3D hybrid sensor is properly academic Learning that are not. Memo 3D hybrid sensor Reset Lee (→ P98) And then learning Please to try again. Vehicle position is shifted. Positioning error. For prone location of positioning error, "About error" and (→ P205) Please visit. Memo 3D hybrid sensor Reset Lee (→ P98) And then learning Please to try again. Hands-free calling time to, Sound size in the call the other side Ku hear. Of the other party side voice (from the speakers

Voice) is enters into the microphone. Eh Coe is the other party's voice the vehicle speakers It caused to enter the microphone through In I will occur. Improved by decreasing the earpiece volume It may be able to (→ "Navigation To set the volume of the tion "(P111)) . However, on the mechanism of the machine, completely sound Can be eliminated trees (echo) To do. Also, call the other party loud voice It hard to further interviews when speak in Since Ri will, through an ordinary size of voice Please speak. In connection with the Bluetooth device Not wood. This unit is able to communicate with the Bluetooth device It has become in no state. Or power cycle the Bluetooth equipment, Car engine switch (ACC) and OFF / Please be ON. Turn on the Bluetooth device later When was, either you wait about a minute, "Switching the Bluetooth device" (→ P108) By the operation, and Bluetooth connection Please select the Bluetooth device. Page 208

208 CRA4803-A Audio Common items Symptom Cause Treatment No sound. Volume is set to 0. Please raise the volume. It is muted. Please cancel the mute.

No picture. It does not apply a parking brake. The Kaketekuda the parking brake Sai. It has become the navigation standby state. And be sure to release the Navi standby There. → temporarily turn off the "screen (Nabisuta -Standby) " (P24) The navigation on the monitor Image of not displayed. Monitor, the navigation screen It is not switched. (You are here) it is going to change the screen Please. Speed before or behind No sound from the car. It is appropriate adjustment of the front and rear volume balance No. Please properly adjusted and set. → "fader / balance setting" (P145) Left or right speaker No sound from. It is a proper regulation of the left and right volume balance No. I can not image quality adjustment. It does not apply a parking brake. Please take the parking brake. In the LCD screen, small There are black spots and bright spots. In the liquid crystal of the peculiar phenomenon, and there is a malfunction To do. Of display image is jagged It is. Wide screen phenomenon peculiar, in failure No. FM / AM Symptom Cause

Treatment "Gee during radio reception Gee, miscellaneous of heavy rainfall " Sound often. Radio broadcasting station is weak. You should be try to tune the other broadcast stations There. → "receive a radio broadcast" (P124) Such as there is an obstacle around, the reception state It is not good. When the reception state becomes good, noise is also small Masu no longer. It can not be automatic tuning. There is no strong radio broadcast stations. Manual Please be tuning in. → "Radio You receive the broadcast. " (P124) Failure kana? If you think Page 209

209 CRA4803-A With Recording CD / CD-R / RW (WMA / MP3) Symptom Cause Treatment Play the CD-R and CD-RW Can not. Disc is finalized Not. Please to finalize the disc. The WMA / MP3 files again I can not live. And ".wma" to WMA files, The expansion of the ".mp3" to MP3 files Papier-mache is not attached. Extension ".wma" to WMA files, MP3

Disk with the extension ".mp3" to the file Please replace bother. ISO9660 level 1, level 2, Romeo, in compliance with the Joliet Not recorded. Les Bell 1 of ISO9660, Les Bell 2, Romeo, was recorded in accordance with Joliet Please replace the disk. Bit rate that does not correspond to In are recorded. It was recorded at a bit rate which corresponds to Please be in WMA / MP3 files. WMA / MP3 file playback Big noise comes in. There is a format and file extension It is not. Please replace the disk (WMA format File in the ".wma", in MP3 format and are not And with the extension of ".mp3" to not file Please do not play the CD-R / RW was). Listen want WMA / MP3 file Il can not be found. And ".wma" to WMA files, The expansion of the ".mp3" to MP3 files Papier-mache is not attached. Extension ".wma" to WMA files, MP3 Disk with the extension ".mp3" to the file Please replace bother. Folder name or file Name is not displayed correctly. ISO9660 level 1, level 2, Romeo, in compliance with the Joliet Not recorded. Les Bell 1 of ISO9660, Les Bell 2, Romeo, was recorded in accordance with Joliet Please replace the disk. WMA / MP3 file playback But it is different from the recorded order. WMA / MP3 files, record Play in the order at the time of the there are times when it is not.

Depending on the writing software, Folder name, and the numbers at the beginning of the file name By attaching (01, 02, etc.), play You might be able to specify the order. It was "hot or cold, Because, you can not play. Day Remove the disk to Do There. "Message that It is displayed. In the vicinity of the air conditioning outlet such causes that the installed, Na The internal temperature of the navigation body It becomes higher or lower. Remove the disk, it operates normally temperature Please wait until the time. Improved If not, please consult your dealer. "I do not play. Di Remove the disk to Do There. "Message that It is displayed. and "you can not play disc It is. Message. " There is displayed. The disc is extremely dirty. Please wipe off the dirt of the disk. There is a scratch or warp in the disk. It will continue to exchange to no scratches and warping disc Please. Inserted to the front and back surfaces of the disk in reverse Have input. Title surface of the disc is inserted in the upper Please be. Disk that can not be played on this unit It has inserts. The "Types of Playable Disk" (→ P200) The Please check, disk that can be played on this unit Please replace bother. Failure kana? If you think Page 210

210

CRA4803-A TV Symptom Cause Treatment Screen is stopped. Screen reflected and jittery, It has dropped frames. Square of the noise on the screen It reflected. such as when the reception state worsens, It becomes such symptoms. These In terrestrial digital broadcasting peculiar phenomenon, This is not a malfunction. Go to a stable location of the receiving state Please viewing. Voice switching , subtitle switching of Thin display of the touch key It is not unchanged outright have been. Program being received, release their information Not sent. In programs that are broadcasting their information Please operate. It can not be received. "Unable to receive" Message is displayed. "I'm going to run a scan Message that the Sai "is It is displayed. It is not the channel scanning. The outside of the battery and when you first use When you, "audience setting clear" (→ P132) When you have the will, the channels on Please refer to the scan. → "the station To be registered automatically (channel scan) " (P131) The move, channel power being received Waves are weakened. Conversion cut the other relay stations (channels)

Please be Etemi. Eriapurise~tsu If you have received in the To other way Also according to the auto broadcasting station search settings Te, automatically receive a possible relay station and system It will switch to column stations. In that can be received The outright automatically looking for a relay station and affiliated stations It can be changed. → The "auto release Oku-kyoku Search Settings " (P132) Or more broadcast stations (channels) is, other Reception environment is strange to go to the area Divided. when the reception environment has changed, and Chan Please refer to the channel scan. → "Registering automatically broadcast stations (channels Rusukyan) " (P131) Reception level is lowered, broadcast reception Can not. Go to a stable location of the receiving state Please viewing. Message of "ANTENNA" Sage is displayed. There is a problem with the one-segment for the antenna. Please consult your dealer. "Antenna connection error possible There is a potential. Called " Message is displayed. "Channel is registered It does not have. Message that " Sage is displayed. The tea in the preset channel list Tunnel is not registered. And be sure to channel scan There. → "broadcasting station is registered automatically (tea Down channel scan) " (P131) "Capable of receiving Sabisugaa Must not. Message that " Hemorrhoids are displayed.

Service is not registered. "This channel is registered You ca n't. Message that " Sage is displayed. It can be memory to user presets If you try to register a no channel It was. Registration is looking for a channel that can be registered Please be. Failure kana? If you think Page 211

211 CRA4803-A With Recording Symptom Cause Treatment "Currently, this service It can not be viewed. Called " Message is displayed. It exists as a broadcast (service) But it is not broadcast. "There is no video information." Message is an indication that It is. It is a program of voice only. "While driving voice only in the Contact Please enjoy. Called " Message is displayed. I tried to watch TV while driving. For safety, the child to see the video while driving You can not. And stop in a safe place Or over the parking brake by Please Ragoran. SD card Symptom Cause

Treatment WMA / MP3 / AAC / WAV You can not play the file. ".wma" To WMA files, MP3 ".mp3" To the file, AAC files ".m4a" Le, the WAV file It does not have the extension ".wav". Extension ".wma" to WMA files, Extension ".mp3" to MP3 files, Extension ".m4a" to AAC files, The extension ".wav" to the WAV file Please put. Recorded at a bit rate that does not correspond to That has been. Record is at a bit rate that corresponds to To WMA / MP3 / AAC files Please be. You want to listen to WMA / MP3 / AAC / WAV files found Not shell. ".wma" To WMA files, MP3 ".mp3" To the file, AAC files ".m4a" Le, the WAV file It does not have the extension ".wav". Extension ".wma" to WMA files, Extension ".mp3" to MP3 files, Extension ".m4a" to AAC files, The extension ".wav" to the WAV file Please put. It is recognized in you have a personal computer SD card that is, the machine In is not recognized. "The SD card in this machine It can not be used. Called " Message is displayed. and insert the SD card that the unit does not support It was input. where you will find sure the SD card that is supported by this unit Please sure. (→ P137) Using a dedicated format software,

Please be formatted. When the format, and came to SD card All recorded data will be erased. I will be sure to perform a backup of the data Please. Format software, SD association Of tion, the input from the following website You can hand. URL: https: //www.sdcard.org/jp/ "SD card is inserted correctly It is our ensure that it is Please the eye. Message that " Sage is displayed. SD card has not been fully inserted No. You should be in the SD card is fully inserted There. → "out of the SD Card" (P28) Failure kana? If you think Page 212

212 CRA4803-A ETC Symptom Cause Treatment That "it is inserted failure of the ETC card." Message is displayed. Insert failure of the ETC card. Stop the vehicle at the toll booth Place but that is guided (display) There is a case. To check the insertion state of ETC card Up, please insert again. Still error No. and message If the message is displayed for purchasing The consultation Kedah dealer of up have Sai. Not read out "of the ETC card data

No Could. Message is an indication that " It is. [When ETC card insertion] The inserted ETC card Read out soil data No. Please insert again. So Error No. and messages The purchase, if that someone is displayed Please consult your dealer. "Inserted card is in the ETC card I could not be sure. The Make a card Please insert again and sure. Called " Message is displayed. The inserted card Sure whether the ETC card It can not be identified. That it is the correct ETC card Please check, it's going to insert it again Sai. Still, error No. Hoyo If the fine message is displayed ETC card issuer (credit Tokado companies, etc.), or your The consultation Kedah to dealer Sai. You could not be written to "ETC card It was. Message that ". To ETC board equipment failure There. The rather consult with your dealer Please. "The .ETC an abnormality has occurred in the ETC Not available. Message. " There is displayed. Between the ETC board equipment and toll In data processing in An error has occurred. Attendant instructions toll Nishitagatteku Please. At a later date, the sale of purchase Please consult the store. Failure kana? If you think

Page 213

213 CRA4803-A With Recording For reset About body reset When the following circumstances, it will continue to reset the machine Please. When correctly it does not work When the screen is not displayed correctly Memo Even after the body reset, it has been registered in this machine That content and settings do not disappear. • One (Audio) and (menu) Press at the same time for more than 2 seconds ▼ This unit it will restart. About sensor reset The following cases, reset the sensor learning Please were collected by. Place where you change the mounting position and angle of the body If you instead put to the case or another vehicle If the error in the positioning becomes large → please go to [All Reset]. After replacing the tires, even after a while If the distance error is not corrected → please go the distance learning reset]. Memo If you reset the sensor learning, eco-driving Review Price (→ P185) It will also be reset once the information. • • • • •

• One Press (menu), information System information - sensor learning Situation It will touch on Two Sensor learning it will touch on Three All reset or distance learning Reset it touches the Four Yes I want to touch on ▼ The sensor will be reset. Sensor learning and the 3D hybrid sensor of this machine, traveling By detecting the situation (distance / azimuth / inclination (3D)), We are learning the results. Therefore, Positioning accuracy is increased each time the overlay travel You. a result of the sensor has learned is, is built into the machine It is accumulated in the sensor memory is. Page 214

214 CRA4803-A VICS information pay broadcasting service contract agreement Chapter 1 General Provisions (Application of the clause) Article 1 General Foundation road traffic information communication system cell Centers (below I referred to as "the Centre".) The Broadcast Law (1950 Law No. 132) No. In accordance with the provisions of Article 147, this VICS information Yes Fee Broadcasting Service Agreement (hereinafter referred to as "this Agreement" I called. Has established), thereby VICS information It provides boric pay broadcasting service. (Change of Terms and Conditions) Article 2

The Center, subject to change this agreement Ri you. In this case, the supply condition of the service Is, VICS information pay-TV service contracts after the change We are more in agreement about. (Definition of terms) Article 3 In this Agreement, each of the following terms next It uses in the sense of. (1) VICS Service This center has a subscriber in using the car In the eyes, and it is transmitted from the FM multiplex broadcasting stations, and road Pay-TV services of traffic information (2) VICS service contract Receiving the provision of VICS services from the Center kicking contract for (3) subscriber Concluded to our center and VICS service contract Person (4) VICS descrambler Scrambled from FM multiplex broadcasting stations (the agitating Ran) is a radio decrypts the viewing of a broadcast program Equipment for enabling Kind of Chapter 2 services, etc. (Type of VICS service) The Article 4 VICS service, has the following types. (1) character display type service Of the form that displays the road traffic information by the character Service (2) Simple graphical display type service Form to display road traffic information with a simple graphic State of service (3) map superimposed type service The information on a digital road map with the vehicle-mounted device Service of form to be superimposed display (Provision time of VICS service) Article 5 The Center, in principle roughly a week as 120 It provides a time or more of VICS service. Chapter 3 contract (Unit of the contract)

Article 6 The Center, one VICS descrambler We signed a VICS service contract of 1 per. (Providing the area of services) Providing areas of Article 7 VICS service, of the Center In the area of coverage areas (all prefectures of radio waves Generally it is possible to receive the NHK-FM broadcasting It will be within the range). However, the service Hisage Even in the test zone, and VICS by the situation of radio waves If it is not possible to use the services there Ri you. (Establishment of the contract, etc.) Article 8 VICS service, VICS correspondence FM receiver (FM that VICS descrambler is incorporated By you purchased the receiver), the contract of the application it assumes that the only and consent has been made, subsequent addition This subscriber is to be provided for continuously Service It shall be able to bets. (Change of type of VICS service) Article 9 subscribers, corresponding to the type of VICS service By purchasing the VICS correspondence FM receiver, Changing the type of VICS service indicated in Article 4 You can perform. (Transfer or succession of position on the contract) Article 10 subscribers, rights as a subscriber to third parties It is possible to carry out a transfer or succession of the status of the reYou. (Cancellation of the contract which the subscriber does) Article 11 The Center, in the case of the next subscriber VICS It assumes that has released a service contract. (1) subscribers in the future the use of VICS descrambler When you stop over (2) use of VICS descrambler owned by the subscriber When the use has become impossible (Release of the Center carries out contract) Article 12 1 The center, provision subscribers of Article 16 When performing acts contrary to, the VICS You may want to cancel the service contract. In addition, in accordance with the provisions of Article 17, the present broadcasting In a case where change of the transmission mode is performed, VICS service contract, and those that have been released It is considered.

Pursuant to the provisions of 2 Article 11 or Article 12, If the VICS service contract has been canceled Even, The Center, VICS service We do not do the viewing fee of the refund. Page 215

215 CRA4803-A With Recording Chapter 4 Rates (Payment obligations of the fee) Article 13 subscribers, VICS service that the Center is to provide As the bis-fee of, at the time of subscription to each contract unit It will take the payment of the flat fee prescribed in Schedule. In addition, rates, when the subscriber to purchase a receiver And we have to bear in. Chapter 5 Maintenance (Maintenance responsibility of the Center) Article 14 The Center, VICS that the Center is to provide To better retain the viewing quality of service, We will strive to appropriate maintenance. However, subscriber For viewing quality due to the deterioration of equipment It is not limited to this. (Discontinuation of use) Article 15 1 The Center, maintenance or on a factory of broadcasting equipment When things on the unavoidable, the VICS service You may want to stop using. 2 The Center, VICS pursuant to the provisions of the preceding paragraph If you decide not to use the service, rough Advance notice island subscriber that the Vinegar. However, if urgent and unavoidable, It is not limited to this. Chapter 6 Miscellaneous Provisions (Obligations of the subscriber according to the use) Article 16 subscribers, VICS service that the Center is to provide It is able to re-transmit or redistribute the broadcast bis I do not care. (Disclaimer) Article 1 The Center No. 17, natural disaster, incident, such as weather Broadcast pause by viewing failure, other equivalent Sen

On grounds that can not be attributed to the responsibility of ter There is no impossible viewing of more VICS service Negative any responsibility in case it is difficult to No. In addition, the user, the road shape Etc. When you change, places where there is a reasonable situation The case, VICS service is displayed part It is assumed that to acknowledge that there may not You. However, in our center is the change Also change after three years Oite, corresponding to the change Even on the old digital road map that is not, Properly displayed in the VICS service available limit As it will be, to devote a reasonable effort It is a thing. 2 VICS service, multi-radio wave of FM broadcasting Since by weight are provided, the broadcasting If the change of the transmission system or the like is performed, by the receiver the subscriber has purchased the original The or you can no longer use the VICS service Vinegar. The Center, is unavoidable circumstances If it finds that that there is a period of more than three years With a, of VICS service "Notice" The screen or the like, after the well-known to the subscriber and the It is subject to change in the transmission method of broadcast You. Appendix viewing fee Viewing fee: 300 yen (excluding tax) However, it is included in the vehicle unit purchase price. VICS information pay broadcasting service contract agreement Page 216

216 CRA4803-A Other information The database in search About And depending on the data that has become a base to look for location Te point, to be displayed (position) the actual port There are times when you are away with the points. About town page data Based on the position data of the NTT town page It has established a, but the original data its

In some cases, what is wrong. In addition, street address is a vast place and the original We can not identify the appropriate facility from data In places, it is a representative point of the specified district It will be displayed. The purpose of the location that does not appear in the correct position When you set the route as the earth, and its Away the last of the guide land from facilities It may become. For data related to natural objects And not the search point representing the facility to play And Tokoro itself, the natural objects such as mountains and rivers Search data representing, that is representative Point is displayed. For phone number search of data As a phone number search of data, Taunpe Di data has been recorded. About logo display Point that will be displayed on the logo, If there is different from the actual location Ri you. For consideration around search business hours To ATM · parking to consider the hours field, Convenience stores, family restaurants, file Sutofudo gasoline stations only, Bi-weekly holiday, and support the holiday irregularly No. In addition, some stores in response There are times when it is not. Hours data, not cross the day Because it is sea urchin data acquisition, closed There is also a case of too a 0:00 and a 0:00 And then it has been recorded. 24-hour is recorded in sales of 24 hours It has been. • • • • • • •

• Notes on route When the route search, automatically route / voice Guidance will be set. Day of the week, with the time regulations Te are those of the route searched time is reflected You. For example, the time in the road of the "morning-way possible" The lapse between, and running the site to "noon" Exchange and such a result not pass the set route There are times when it is contrary to the through regulation. And in accordance with the always actual traffic signs when driving Give me. In addition, the support part in such as winter closed to traffic There are also those without. • • • It searched route road type and traffic regulations Etc. In view of control, this machine was determined purpose This is an example of directions leading to the ground. Necessarily the most It does not necessarily become applicable. Route search is 100 m scale map of It is intended the road that is displayed in. Road to be displayed only in the city map It does not become the object. Honshu-Hokkaido, Honshu-Shikoku, Honshu Kyushu Routes can also be set (Honshu - the North Sea Place to ferry such as the road has been operated The case, the route that uses the route is searched Masu). For ferry route and the route search Because it is an auxiliary means, long-distance route pairs It does not become the elephant. For ferry route, all of the Fe In any manner not Lee route has been recorded Must not. In addition, the priority to the ferry route You ferry route is always used when you Only the no. You can not pass due to winter road closures When you explore the road, error message There will be displayed. It has been used in the configuration that has been the root

Depending on that inlet / outlet, getting on and off IC (in Can not be ter change) specified operation There is a case. • • • • • • • Page 217

217 CRA4803-A With Recording How to route search Traveling direction and opposite route currently set It may be constant. The route guiding the opposite side of the river and station It may become. When such It is close to the road that you want to use the destination Please try to move. Congestion consideration route, toll road avoidance, Fe In such as Lee route avoidance, other appropriate Lou It is not be avoided if there is no To Kotogaa Ri you. place it recommended route is less than six If, that what this one is the same root There. That you can not route search by location There is a door. In such cases, the eye "Large intersection near the target point and the departure point Point ※ go try to set a stop-off place in the vicinity. " Please. ※ The "big intersection", narrow streets (100 m Gray display narrow road on a scale (→ "Ki No. Mark List "(P235)) What road other than This is the tooth of the intersection.

For road-painted route Depending on the road shape, and from down the road painted There are cases where the road appear to protrude You. Departure, destination, in the front and back of the stop-off place and Michinuri You may or may not Risa. For this reason, As root in the vicinity of the place stop-off is interrupted It may appear. About voice guidance In the case of auto re-route, to the original route The guide point to return will not be guided. However, that point is guided by such turn right If necessary, do the normal assistance. The purpose of the interchange exit of the toll road If you set as a place, a "fast exit", "fee Gold "may not be the voice guidance. • • • • • • • • • For the intersection enlarged view 2D intersection enlarged view, intersection and its about Above is a line connecting a point of 150 m before it is as it appears. The road shape Depending, such become heading up It might have. Intersection expansion in the guide point of the first guide point Soybeans, it may not be displayed. For pay rates in root candidate selection screen In the toll road special fee structure, it is a positive There fee might not be displayed. If the route, including the fee non-compliant route, The display will indicate "more than ○○ yen". If the route can not be billing, " *****

It is displayed as a circle. " For a general toll roads, and some routes Not supported is doing. Toll road and on the route from the lamp And when you search, and purpose on the toll road When you set the ground and leaving, pay road Because it can not determine the interval that use the road, fee Gold is not calculated correctly. Or some actual and different rate is displayed, You may want to or be guided. This If you like, and according to the actual charges Give me. Pay rates are likely to be revised Because, only your Kedah as a guide Sai. • • • • • • • • • Other information Page 218

218 CRA4803-A Notes on VICS information About FM multiplex broadcasting Using the FM multiplex broadcasting from the VICS Center VICS information that you use is, NHK-FM of FM multiIt is provided by the radio waves of heavy broadcast. Because the information is updated in a constant cycle, information It takes time to broadcast gather. Broadcast time may vary depending on the broadcasting station or Vinegar. It was confirmed by such VICS Center information Please be. Contact the VICS Center VICS of concept, planning, or FM multiplex broadcasting

Matters relating to the VICS information to be provided more Can contact the (goods) VICS Center Give me. Telephone Hours: 9:30 to 17:45 (Saturdays, Sundays and public holidays, year End New Year of Center holiday I except) Phone number: 0570-00-8831 (And from the whole country in the Navi I in available at local call rate Will) FAX reception time: 24 hours FAX number: 03-3562-1719 (nationwide) In addition, the latest information and FM multiplex broadcasting stations of VICS Homupe such as the frequency of the following information: You can see in the letters. URL: http: //www.vics.or.jp/ • • • City map (detailed city map) Recording area This unit, detailed city map of the following cities Osamu It has been recorded. Maintenance area more than 95% (33 cities) Saitama, Chiba, Chiyoda, Chuo, Minato-ku, Shinjuku, Bunkyo-ku, Taito, Sumida, Koto-ku, Shinagawa, Meguro-ku, Ota, Setagaya-ku, Shibuya-ku, Nakano, cedar Average ku, Toshima, Kita Ward, Arakawa-ku, Itabashi Ward, Nerima Ward, foot Stand Ward, Katsushika Ward, Edogawa Ward, Yokohama, Kawasaki, name old Ya City, Muko City, Osaka, Sakai City, Higashi-Osaka, Kobe Maintenance area more than 80% (three cities) Komae City, Sagamihara, Fuchu-cho Maintenance area more than 50% (10 cities) Machida, Kumiyama, Moriguchi, Matsubara City, Takaishi, large Osaka Sayama, Kitakyushu, Fukuoka, tighten the town, Mizumaki cho Maintenance area less than 50% (108 cities) Sapporo, Ebetsu, Kitahiroshima, Ishikari City, Sendai, name Toshi, Tagajo, rifu, Tomiya-cho, Kawagoe, Kawaguchi City, Kasukabe, Ageo, Soka, Koshigaya, Toda City, Shiki, Wako, Niiza, Yashio, Fujimi, three

Township City, Hasuda, Ichikawa, Matsudo, Sakura City, Narashino City, Ichihara, Yachiyo, Urayasu, Yotsukaido, Yachimata City, Oamishirasato-machi, Hachioji, Musashino, Mitaka, Chofu, Tama, Inagi, Nishitokyo, Yokosuka, Kamakura, Fujisawa, Zushi, Atsugi, Yamato City, Zama City, Aikawa, Kiyokawa Village, Niigata City, Uenohara, Shizuoka, Hamamatsu, Kosai, Seto, Kasugai, Tokai, large Prefecture City, Owariasahi, Toyoake, Nisshin City, Kiyosu City, Kita-mei Furuya City, Nagakute, toyoyama, Ama, Aichi, Daiji Town, crab E-machi, Tobishima village, Otsu, Kyoto, Uji City, Nagaokakyo City, Hachiman city, Toyonaka, Suita, Yao City, Tondabayashi, Kawachinagano, Daito City, Izumi City, Habikino, Kadoma, Settsu City, Amagasaki, Akashi, Nishinomiya, Ashiya, Takarazuka City, Miki City, Sanda, Inami-cho, Ikoma, Heguri-cho, Okayama, hayashima, Hiroshima City, Hatsukaichi, Kaita-cho, slope Town, Shimonoseki, middle City, Kasuga, onojo, Nakagawa Town, Shingu-machi, Kasuya-cho, Ashiya-machi Other information Page 219

219 CRA4803-A With Recording From Hanshin Expressway Co., Ltd. Contacting Undeveloped District network to Hanshin Expressway In order to interpolate between, it receives the transit ticket, one Again in the transit ticket after it has passed through the 般道 road, Take the Hanshin Expressway without paying the toll Can there is a "transit zone". (Riding ETC is available in the following section. ) In addition, the "power Ri For details of the next section ", the following Please visit. No. 3 Kobe line (Kyobashi Maya doorway) ⇔5 Pat Bay Shore line (Sumiyoshihama doorway) No. 4 Wangan (Ohama doorway) No. ⇔15 Sakai-sen (Sakai Doorway) No. 3 Kobe line (Nakanoshima west exit) → 1 No. loop line (Dojima entrance) No. 16 Osaka Port line (Namiyoke exit) → 1 No. loop line

(Dojima entrance) About recording database For map data It supports the Japan geodetic system. And no to the copyright holders in any form The reproduction of all or part of the map by the cross-sectional It is, is strictly prohibited to take advantage. In preparing this map, general goods Dan Japan digital road map Association departure Nationwide digital road map database of line We've used vinegar. (Surveying Law Article 44 Achievements use approval is based on the 90-063) "Ⓒ 2013 general Foundation Japan digital road Map Association "to use the issue in March 2013. This map, with the approval of the Geographical director Te, ministry of technical documentation H · 1-No.3 "day Correction amount of the island position in this geodetic system " And those created utilizing. (Approval number No. country land 企調 September 2010 No. 180 The 28th) • • • • In preparing for this map, national land area With the approval of the re-director, 5 thousand of the hospital issue Minute I was using one of Land basic diagram. (Approval number No. flat 23 boss, No. 43, -10 issue) In preparing for this map, national land area With the approval of the re-director, disaster of the hospital issue We were using a reconstruction plan based on diagrams. (Approval number Flat 24 boss, No. 199 -10 issue) In preparing for this map, national land area With the approval of the re-director, the foundation of the hospital issue We were using the map information. (Approval number flat 24 boss, No. 780 No. 10) In the context of database creation time, display It may map being is different from the current situation Please note. About traffic regulation data Traffic regulation data used in this product

It has its own survey results up to March 2013 And not use what you have created on the basis of the You. This data is on-site traffic control and the differences If cormorants, the traffic control signs and display of site Please follow the like. Traffic regulation data used in this product The only thing that is applied to a common vehicle, Regulations such as large vehicles and motorcycles are included It does not. Forewarned Kedah Sai. For toll road fee data Rates of toll road that you are using for this product The data in the study up to June 2013 Light car at the time October 1, 2013 · It is a thing of the medium-sized automotive and ordinary vehicles. On January 1, 2012 by distance fee system of implementation For it will be with the corresponding cash vehicle fee only. • • • • • • • Other information Page 220

220 CRA4803-A About VICS service area VICS area that is included in this product Following prefectures will be subject to. Hokkaido (Kitami) (Asahikawa) (Sapporo) (Kushiro) (box making Cans), Aomori, Akita, Iwate, Yamagata Prefecture, Miyagi, Fukushima, Tochigi, Gunma, Ibaraki Prefecture, Chiba, Saitama, Tokyo, Kanagawa, Yamanashi Prefecture, Niigata Prefecture, Nagano Prefecture, Shizuoka Prefecture, Aichi Prefecture, three Heavy Prefecture, Gifu Prefecture, Ishikawa, Fukui Prefecture, Toyama Prefecture, Shiga Prefecture, Kyoto, Osaka, Hyogo, Okayama Prefecture, Nara prefecture, Wakayama prefecture, Tottori, Shimane Prefecture, Hiroshima

Prefecture, Yamaguchi Prefecture, Tokushima, Kagawa, Ehime Prefecture, high Kochi Prefecture, Fukuoka, Saga, Nagasaki, Kumamoto Prefecture, Oita Prefecture, Miyazaki Prefecture, Kagoshima Prefecture, Okinawa Prefecture Even VICS service area is enlarged, Service that has been newly expanded with this product Level in the area 3 (map display type) display You can not. For data of the broadcast station list VICS, AM, FM, digital terrestrial TV Broadcasting station name list during the investigation in May 2013 It is a thing of the point. Other information sources NTT town page Co., Ltd. (2013 Of March current town page data) Foundation for Traffic Accident Research and Analysis Center (The danger zone data by fiscal 1999 statistics) Ltd. IMJ (October 2012 The current parking data) Memo In the recorded database typographical errors, omissions, and the positional deviation, etc. As there is an error on the on or content notation Also our company does not guarantee. • • • • • • • Other information Page 221

221 CRA4803-A With Recording For after-sales service Warranty 1. Warranty

Toyota dealer, or to Toyota vehicles Toyota specified service factory and your attachment to Toyota Jun Materials positively goods, or if the manufacturing defects occur, in accordance with terms and conditions shown below This will be a free repair. (Below, called the warranty repair this free of charge repair.) Warranty repair is done by the exchange or repair of parts. Also, remove the bug parts DOO It will become the property of Toyota. 2. Period of guarantee, How to Get ⑴ warranty period Period to obtain warranty repair, the date of your mounting products to Toyota vehicles from your start date Suppose you have it counted three or annual Te. However, mileage even within that period is up to 60 000km To you. ⑵ of warranty repair to Get Toyota dealer when it comes to accept a warranty repair, or to Toyota specified service factory own I have in the state attached to the motion vehicles, please tell us the warranty repair. 3. Guaranteed matters not Even within the ⑴ warranty period, the problems caused by the following does not guarantee repair. ① mounting of Toyota's dealers, or other than Toyota specified service factory, repair and Toyota such as remodeling other is not allowed. ② handling practices and different use and improper storage, and the like, and earthquake shown in handling documents, typhoon, water Natural disasters and accidents, fires, such as harm. Cost of ⑵ the following things is not our burden. ① such as consumable parts and oils and fats. (Fuse, and various light bulb.) And such inconvenience and loss caused by the fact that it was not able to use ② commodity. 4. The application of the guarantee It will apply only if it is used in Japan. 5. Other Reseller for purchasing If you are unsure about repairs after the warranty period, please contact Please. Minimum holding period of repair performance parts

The (parts required for functional maintenance) for repair performance parts of the product, after production discontinuation least 6 years It owns. For such as after-sales service, when it is not in you can see is, Please contact your dealer. Page 222

222 CRA4803-A Specification ◆ common unit Use voltage ................................................ ..13.2 V DC (10.5 V ~ 16.0 V available) Maximum current consumption ............................................... ...... 15 A Operating temperature range ............................ -20 ℃ ~ + 65 ℃ ◆ navigation body (GPS unit) Receiving scheme ......................... multi-channel receiving system ◆ monitor part Screen size .................................. 7.0-inch wide VGA The number of pixels ........................................... 1 152 000 pixels Horizontal 800 X vertical 480 X 3 (RGB)] Method ........................ TFT active matrix system ◆ audio part Maximum output ................................................ ..... 40 W x 4 Load impedance .................................... 4 Ω x 4 Equalizer (5-band graphic equalizer) Frequency ............. 100 Hz, 315 Hz, 1.25 kHz, 3.15 kHz, 8 kHz Adjust width ............................ ± 12 dB (2 dB / step) ◆ CD player mechanism part Corresponding disk. .... CD-ROM, CD-DA, CD-R / RW Decoding format MP3. .................. MPEG-1,2 AUDIO LAYER-3 WMA. ............................ Windows Media Audio ver.7,8,9 (2ch audio) ◆ FM tuner section Reception frequency band .............. 76.0 MHz ~ 90.0 MHz Voice ................................................. .............. stereo ◆ AM tuner section

Reception frequency band ............... 522 kHz ~1 629 kHz Voice ................................................. .............. monaural ◆ TV tuner section Broadcasting system ................... terrestrial digital broadcasting system (Japan) Receiving channel ................ 470 MHz ~ 770 MHz (UHF13ch ~ 62ch) ◆ AUX part Audio input level .............................................. 1 Vp-p ◆ SD card section The maximum memory capacity .......................................... 32 GB File system .......................... FAT16 / FAT32 Decoding format MP3 ........... MPEG-1,2,2.5 AUDIO LAYER-3 WMA (ASF) ............... Windows Media Audio ver.7,8,9 (2ch audio) AAC ..................... iTunes ver. 7.6 (AAC-LC) WAV ................................................. ............ LPCM ◆ Bluetooth part Bluetooth version ........ Bluetooth2.1 + EDR ◆ Dimensions Body ..................... 206 mm (W) X 104 mm (H) X 176 mm (D) ◆ mass Body ................................................. ................. 2.4 kg ◆ accessories Mounting Kit ................................................ ............ 1 set Navigation & audio book ..................... 1 Page 223

223 CRA4803-A With Recording Trademark, copyright, etc. This product, based on the Telecommunications Business Law and the Radio Law We're getting a design certification that brute. D11-0044001 007WWDUL0613 Microsoft, Windows, Windows Vista, your And Internet Explorer, the United States Microsoft

Of the Corporation, the United States, Japan and other They are registered trademarks or trademarks in the country. This product, the US Microsoft Corporation We are using the technology to ownership. In addition, the United States Used without permission of Microsoft Licensing Inc. Use or can not be distributed. The MP3 is an abbreviation of "MPEG Audio Layer 3", This is the standard format for audio compression technology. If you want to provide the machine, personal non-commercial purposes Only license will be provided. Following broadcast * In, we can provide a license to use this machine, squid Whether it is format intended to mean the right use It is not. Use this machine in the following broadcast * If, each requires a unique license Will. For more information, on the Internet Home Page http://www.mp3licensing.com Please visit. * Commercial purposes, that is real to the generation of profits -Time broadcasting (terrestrial broadcasting, satellite broadcasting, cable TV It is set to the beginning media), and using the Internet Broadcasting and data transfer was, and O started the intranet Network or Pay audio, Ya to Electronic, such as audio on-demand system Such as the broadcast program of the distribution system. iTunes are registered in the US and other countries It was a trademark of Apple Inc.. And "Made for iPhone", the iPhone only It is designed to connect, sex Apple set By developers and meets the performance criteria It indicates that it is a certified Electronic Accessories You. Apple, function and safety of this product And negative the responsibility for compliance with the standard No. Use this accessory with iPhone By, it will affect the wireless performance Please note that there is a possibility. Generally Foundation road traffic Information and Communication System Center Of a trademark. SDHC logo is a trademark of SD-3C, LLC. •

• • • • • • • Bluetooth Word mark and logos, is a trademark owned by Bluetooth SIG, Inc., Pioneer Corporation, to use these trademark That we have received the permission. All other trade marks And trade names are the property of their respective holders owned. "ATOK" is a registered JustSystems Co., Ltd. It is a trademark. "Map code" and "MAPCODE", the stock It is a registered trademark of expression company Denso. This product NaviCon ® This is the model that corresponds to. "NaviCon ® "Trademark also of Denso It is a registered trademark. smart nAVVi Link is, Aisin Dove Ryu is a trademark of the Corporation. "Google," "Android", "Google Play" is, It is trademarks or registered trademarks of Google Inc.. Modification and replication of the browser that is included in this product, Acts to be separated from the product, yes to go Not only. Entier (Entia), Ltd. Hitachi, Ltd. The trademark in Japan and other countries of the work stations It is. 1. final demand house, added only to a specific one device It shall be able to duplicate the biasing soft copies. 2. final demand house, all of the bundled software copies Or to third parties a part, it is a fee and free Regardless TO THE amortization, transfer, licensing its It is assumed that it must not be used in other ways You.

3. final demand house, all of the bundled software copies Or disassemble or reverse compile the part Yl or it is assumed that it can not be modified You. 4. final demand house, except in the case provided for in Paragraph 1, Wipe all or part of the bundled software copies and paper making, or I be combined with other programs I shall not et al. 5. final demand house yellowtail snapper all of the bundled software copies Clause combined with alone or in combination with other products some Not, either directly or indirectly to each of the following items: If you are the appropriate handling, final demand house, Regulation of the "Foreign Exchange and Foreign Trade Law" and the United States The Make the export-related laws and regulations of foreign countries such as the Export Administration Regulations On the certification, it is assumed to take the necessary procedures. (1) When the export. (2) When you bring up abroad. (3) provide to non-residents, or when it is to be used. (4) In addition to the provisions of the preceding No. 3, "foreign exchange and outside Constant in country Trade Law "or foreign export laws and regulations When there is the eye. • • • • • • • • • Page 224

224 CRA4803-A Note 1: all described in the "final customers license the terms of the above-mentioned For details on the contents of the tree matters ", Article 5 second In this Appendix, in the case of 3 and fourth terms as "Attachment With soft copy of "the phrase is" this matter equipment To use Embedded for runtime ", and Article 6 second In this Annex in the case of the term is "bundled software replication

Things "the phrase is" binding accompanying software " You shall be deemed to be replaced respectively. Note 2: Article 6 Paragraph 1, Item 3 or same Article 2 Section The bundled software improved version based on the provisions of No. 2 Follow the final customers license terms according to the present Exhibit If stomach instep to create, in this Exhibit "attached Seo Shift copies of "the phrase is" bundled software breaks It shall be deemed to be replaced with good version ". Here, the software that is used in this product We have been described for the use license of the (license) You. To hold the exact content, textual (English) I will not describe. bsdiff Copyright 2003-2005 Colin Percival All rights reserved Redistribution and use in source and binary forms, with or without modification, are permitted providing that the following conditions are met: 1. Redistributions of source code MUST RETAIN the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form MUST reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and / or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. • • libjpeg This software is based in part on the work of the Independent JPEG Group FreeType Portions of the software in this product are copyright 1996 - 2009 The FreeType Project (Www.freetype.org). All rights reserved. Licensed under the FreeType Project LICENSE, 2006-Jan-27. (Http://www.freetype.org/FTL.TXT) Recording data and programs in this product Copyright, the copyright for our company and our We have been attributed to a third party that was licensed for the right based You. Customers, the child in any format All or of these data and programs Copy a part, modified, it can be such as analysis To do. We, the map data that has been recorded in this product such as It is complete, accurate, and this product Contact It also ensures that the matching of customers to a particular purpose There is no than. This machine is in Japan only. GPS positioning range It does not offer used in different foreign countries. The appearance and specifications of the product, the pre for improvement You may want to change WARNING without. Moreover, the preparative There is that instruction manual of content and real is different You. Modification of the product in that case, or The other is not possible to respond to the request of your replacement. Other, proper nouns, such as product names are trademarks of their respective owners Or is a registered trademark. • • • • •

• • Trademark, copyright, etc. Page 225

225 CRA4803-A With Recording Index Menu Index Information Menu (Menu) ▶ Information ▶ Congestion information → P92, 93 Data version display → P100 Maintenance → P96 System Information → P98, 99 ETC → P94 Destination menu (Menu) ▶ Destination ▶ Name → P55 Address → P56 Genre → P57 Surrounding facilities → P57 Telephone number → P59 Registration area → P59 Search history → P60 Home → P54 Map code → P60 Setting and editing menu (Menu) ▶ Setting and editing ▶

Navigation ▶ Navigation data Edit → registered location Edit → P83 Search history erase → P87 Learning route erase → P87 Traveling locus erase → P88 Navigation function setting → P101 Volume setting → P111 System Settings → Security Settings → P116 Information / Phone Speaker setting → P111 Slide frame display setting → P119 Back guide monitor settings → P170, 171 Setting initialization → P119 Vehicle information setting → P113 Vehicle position correction → P115 Audio ▶ Audio Settings → P145 TV setting → P132 Movie screen clock display → P123 Telephone and communications ▶ Bluetooth Settings → P106 Volume setting → P111 Mobile phone data Edit → P182 QUICK SETUP → P15 Page 226

226 CRA4803-A Mobile phone menu (Menu) ▶ Cellular phone ▶ Dial → P180 Memory dial → P182 Call History → P180 Redial → P181 Bluetooth Settings → P106

Edit and erase → P182 Eco Manager menu (Menu) ▶ Eco Manager ▶ Eco prize → P186 Fuel consumption setting → P186 Eco-driving evaluation history → P185 Root Edit menu (Menu) ▶ Route editing ▶ Root erase → P79 Route profile → P78 Details Routing → P78 Stop-off place Feed → P79 Demonstration run → P79 Index Page 227

227 CRA4803-A With Recording Concordance Syllabary order Oh Feed Na was revealed 26 Brightness Twenty five After-sales service 221 Arrow Guide 71 Information volume 111 Information areas 71

Equalizer 146 Correction 147 Eject (disk) 27 Pause 133, 1 35, 137, 140 General road simple guide 104 Illustrations information (facility) 52 Irumine Sho down Hundred Tint Twenty five Color temperature Twenty five Color strength Twenty five Indicator 26 Indicator (security) 118 Interchange (IC) 50 , 64, 67 Intelligent reroute 76 Consideration Hours 58, 216 Video screen clock display One two three Eco-driving evaluation 185 Echo (reverberation) 178 Eco prize 186 Eco Manager menu 37, 185 Area preset

1 25, 129 Make the audio operation 195 Upper / lower case 31 AUDIO SETUP 145 Auto (VICS broadcast station selection) 93 Auto highway map 102 Auto highway mode 49 Auto broadcasting station search 132 Auto re-route 76 It sends sound 26 Music CD 133 Audio compression method 201 Audio assist 73, 157 Voice switching 131 Volume 16, 1 11, 170, 189 Or Tachometer 98 External device 144 Learning route erase 87 Learning route search 69, 103 Angle adjustment Twenty four Image quality adjustment

Twenty five Screen switching (Navigation ⇔AV source scan ) Twenty three Symbol 34 Regulatory display 105 Locus display 39 Function settings 101 Congestion information 105 Map display 102 Route guidance 103 Keyboard system (character input) Thirty Line feed 26 Distance 98 Search by Keyword 56 The received Nitsu of emergency warning broadcasting (EWS) have 123 Automatic display of emergency information 91 Depth of black Twenty five Inclinometer 98 Cellular phone Receive 178 Play 179 Switching 108 Mobile phone information

182 Edit a mobile phone information 182 Mobile telephone system (character input) Thirty Mobile phone menu 37 Mobile phone brought forget guidance 110 Mobile phone brought to forget to set the guidance Teisu Ru 110 Use a mobile phone 178 You are here screen 21, 39 Display of current location information 102 Border guidance 48, 104 Search history 87 Look for from the search history Sixty Wide area 41 Sound effect 84 Intersection guidance display 71, 103 High precision 3D hybrid system -time 204 Traffic regulation information 89 Index Page 228

228 CRA4803-A Traffic Fault information 89 Transportation information 89, 127

Candidate display screen 47 Go to here 63 I register here 81 Error 205 Contrast (light and dark) Twenty five Narrow street guidance 48, 73, 104 Playback 133, 135, 137, 140 Re-search (root) 78 Side map 46 Service area (SA) 50, 52 Service switching 130 Coordinate 46 Sampling frequency 202 Time regulations 69 Seek (VICS broadcast station selection) 93 City name 56 Vehicle position correction 115 Facility information 50, 51 Home Return 54 Sign up 16, 54

City map 42, 102, 218 City map boundary display 102 Automatic registration (broadcaster) 1 26, 131 Subtitle switching 131 Vehicle speed pulse 98, 99 Vehicle information 17, 113 Vehicle Maintenance 96 Search by Category 57 Cross-hair cursor 38, 41 Look for in Address 56 Congestion auto guide 77, 91 Congestion and regulatory information 77, 91 Congestion consideration route search 69, 103 Congestion information 89 , 92, 93 Congestion information display 105 Congestion information display (highway Lee mode) 52 Congestion information display object road 105 Congestion check 77, 91 Look for the surrounding facilities 57 Parallel parking 1 57, 166 Recording database

219 Main voice 131 Reception status 93 Departure specified 68 Steady display 105 Specification 222 Mute timing 148 Mute level 148 Erasure Learning route 87 Search history 87 Vehicular swept path 88 Registered location 84 Root 79, 80 Getting on and off IC specified 67 Details (scale of the map) 41 Detailed city map → Shitima -up 42, 218 Details Routing 66 Information screen 47 Information Menu 35 The expendables 96 Initialization

119 Shortcut menu 38 Serial number 98 Autonomous navigation 204 Satellite 204 Traffic light 49 Signal Just Us 104 Direction guiding 73 Vibration gyro sensor 204 Simple guide 74 Sky View 42 Scan 19, 126 Scan → automatic registration 131 Scroll confirmation screen 65 Scroll screen 41 Graphic information (VICS information) 92 Scale 41 Steering switch Twenty one Stereo broadcasting 1 24, 129 Use a smartphone cooperation function 193 Smart IC Fifty

Smart IC consideration route search 69, 103 Slide operation Twenty two View the slide frame 119 Shift (vehicle position) 115 Security Features 116 Security Settings 16, 116 Connection Status 99 Setting initialization 119 Setting and editing menu 36 Index Page 229

229 CRA4803-A With Recording Safety Information 48 Before and after G 98 Sensor learning 98, 213 Center information (VICS Center ) 92 Traveling locus auto-erase 102 Traveling locus erase 88 Traveling locus display 102 Beep 1 11, 189

Operation touch key 128 Source level adjuster 147 It was Dial Q2 59 Dial 180 Town page 216 Stop-off place 66 Postponement 79 Delete 67 Add to 66 Sorting 67 Touch key Twenty two Touch panel Twenty two Touch panel calibration down 196 The feed tab 26 Search conditions 64, 78 Speed dial 59 Check mark 26 Checklist 26 Map color switching 102 Look at the map 55

Or to a telephone number that has been registered in the map kicking 181 Channel scan 19, 131 Parking information 89 Parking mark display 105 Parking limited (models) 113 Parking limited (vehicle size) 114 Roadblock consideration auto re-route 76 During a call menu 181 Operation of a call in the menu 181 Data version Hundred Demonstration run 79 Power-supply voltage Hundred Radio launch 110 I ON / OFF the radio launch 110 Look for the phone number 59 Or a phone call by entering the phone number kicking 180 You receive a phone call 178 Make a phone call 179 Dial 180 Phone number that has been registered in the map 181 Memory dialing 180

Redial 181 Expected time of arrival 70 Estimated arrival time rate (general road) 103 Estimated arrival time speed (surcharge road) 103 Sign up Home 16, 54 Scale 44 Location 81 Registered location Erasure 84 Edit 83 Name display (private mapping) 84 Registration land transition 85 Look for from the registration area 59 Road traffic information communication system → V IC S 89 Display clock (video screen) One two three Urban expressway 72 State Name 56 Track 133 Tripmeter 98 I Navigation screen (map screen ) Twenty three Navi standby

Twenty four Navi menu 35 Input keyboard 189 Fuel consumption 17 Fuel consumption set 186 Normal view 42 The Heart full voice 104 Highway mode 42, 46, 50 Parking area (PA) 50, 52 Parking brake Hundred Location Look for 55 Sign up 81 Passkey 109 You want to change the passkey 109 Password 85, 117 Personalized 18, 187 Back guide monitor 149 Back signal Hundred Index Page 230

230

CRA4803-A Back monitor 173 Transmission 180, 181 Caller identification service 179 Call History 180 A phone call from the call history I bet 180 Program content 131 Program guide 130 Hands-free calling 1 07, 178 Make a hands-free phone call 178 Band 125 Fine adjustment (scroll) Forty Bit rate 202 Display method 41, 190 Factory curve 146 Fader / Balance 145 Ferry route use conditions 103 Folder 13 6, 138, 201 Sub-audio 131 Physical channel 129 Railroad crossing guidance 48, 104

Private mapping 84 Preset Area preset 1 25, 129 User presets 1 25, 129 Preset channel 124, 129 Branch (toll road) 72 Information of the branch destination 51 Branch facility 50, 51 Parallel parking 1 52, 155 The feed page 26 Another road switching 115 Edit Registered location 83 Root 78 Orientation 98 Broadcasting stations (VICS information) 93 Broadcasting stations (radio) 124 Other routes 65 Portable audio player over 144 Button 20, 23 Or Map code Sixty

Map matching 205 Manual preset 125, 130 Multi-session 201 Way, estimated arrival time display 103 Orientation (the map) 42 Look for the name 55 Memory dial 180, 182, 183 Memory dial transfer 107 It wants to erase the memory dial 183 Memory dial a call out beauty Make a phone call 180 Read the memory dial 182 Destination 55 Destination menu 36 Character expansion 189 Character information (VICS information) 92 Character input 30, 31 Upper / lower case 31 Symbol 34 Delete 32 Type Thirty

Space 32 Em 31 Insert 32 Voiced and semi-voiced sound-sensitive 31 Half size 31 Conversion 33 No conversion 33 Enlarged display of character 44 Ya Expiration notification 53 Induction icon 191 Toll road attention point-border guidance 48, 104 Toll road 49 Toll road use conditions 103 Toll classification 113 User icon 188 User switching 191 User setting 188 User presets 1 25, 129 Et al. Light lighting guidance 48, 104 Loudness

146 Radio 124 Random play 134 , 136, 139, 142 Lamp Fifty List (VICS broadcast station selection) 93 List screen 25, 47 Reset (sensor learning) 98, 213 Redial 181 Make a phone call in the redial 181 Index Page 231

231 CRA4803-A With Recording Grade separation 71 Repeat Play 134, 136, 138, 142 Refresh guidance 48, 104 Fee Station 50, 53 Tollgate ( inlet and outlet) 72 Fee indicator 51 Travel time information 89 History information 184 Erase the history information

184 Route guidance 70 Route guidance start screen 64 Route Information 70, 77 The re-search the route 78 Route re-search → Otoriru To 76 Root erase 79, 80 Route search 63 Learning route search 69 Home 54 Congestion consideration route search 69 Smart IC consideration route search 69 Root search criteria 103 Route map 63, 66 Root notes 216 Root profile 63, 65 Level 1: Character 89 Level 2: Simple graphic 89 Level 3: Map 89 Logo 44, 58 Seg 19, 128

Number AZ Number 2D (normal view) fixed scroll 102 2D mark 84 Bilingual broadcasting 131 2-dimensional positioning 204 3D hybrid sensor 12, 204 3D hybrid mode 98 Three-dimensional positioning 204 50 sound tab 26 Traffic display 100m scale while 43 A A2DP 140 AAC (Advanced Audio Coding) 203 ALL REPEAT 142 Apple Lossless 203 ATOK Thirty AUX 144 AVRCP 140 Interrupt to the AV screen 104 AV source icon 121 AV source screen (audio screen ) 2 3, 121 AV source plate 121

AV profile 140 B Bluetooth Audio 140 Switch the Bluetooth equipment 108 Bluetooth Settings 17 Do Bluetooth settings 106 Bluetooth profiles 106 C CD 1 33, 200 CD-EXTRA 200 CD-R / RW 135 Copy Control CD 200 D DDCD 200 DISC REPEAT 134, 136 DRM (digital rights management) 135 E ETC card expiration date Hundred Index Page 232

232 CRA4803-A ETC card expiration notification 53 ETC information 94

ETC mounted state Sixteen ETC unit (ETC-board unit) Hundred ETC lane guide 53, 104 e start guidance 48, 104 F FILE REPEAT 138 FLAT 146 FM-VICS 89 FM multiplex broadcasting 93, 218 FOLDER REPEAT 1 36, 138 G GPS 204 GPS antenna 99 GROUP REPEAT 142 I ID3 Tag 202 ISO9660 201 iTunes 203 J Joliet 201 M m3u 201 MP3 135, 202

MP3i (MP3 interactive) 201 MP3 PRO 201 MPEG2 203 MPEG4 203 MPEG Audio Layer 3 202 N NATURAL 146 Use NaviCon app 193 NON STOP SEEK 124 P POWERFUL 146 Q QUICK SETUP Fifteen R Romeo 201 S SDHC 137 SD card 28, 137, 198 SEEK 124, 129 smart nAVVi Link app I use 194 SUPER BASS 146 T TRACK REPEAT 13 4, 136, 142 V

VBR 202 VICS (Vehicle Information & Communication System) 89 VICS information provision time Ninety Display of VICS information 89, 90, 92 VICS Center 218 VICS mark 91 VOCAL 146 W WAV 203 Windows Media ™ Audio 201 Windows Media Audio 9 Lossless 202 Windows Media Audio 9 Pro fess ional 202 Windows Media Audio 9 VOIC e 202 Windows Media Player 201 WMA 1 35, 201 Index Page 233

CRA4803-A 233 Memo Page 234

CRA4803-A 234 Page 235

235

Symbol marks List ※ symbols and marks, there are times when it is not displayed by the view and scale. ※ might be different from the actual color. Congestion Congestion Favorable Regulation section Inlet closing-way stop Speed limit Wrong way Closed to traffic, closed Large closures Face-to-face way One side alternating traffic Crawl Lane regulation Chain regulation Freeze Disabled car Construction Work Accident Obstacle-road failure Entrance limit Inlet closing Parking (empty) Parking (congestion) Parking (full car) Parking (closure) Parking (Unknown) Weather Event Disaster Fire Cause / events None General way: white frame Toll road: blue frame Parking guidance point Other guidance point of Destination Stop-off place

Point of departure Information areas Guidance in the root (surcharge road) Guidance in the root (general road) Guidance in the root (narrow streets) Fast and pay road National highway Major local roads Prefectural road General road Narrow streets Railway State border National highway number Prefectural road number Toll road road number One Way Sea, rivers and lakes Such as parks, green spaces, lawn Facility site Facility Station building Interchange / lamp name Intersection name Lamp entrance Lamp exit Traffic light Designated point Mountain Park Factory Tunnel entrance Mansion Service area Parking area Interchange Tollgate Smart IC gate Parking Garage Tennis court Museums Zoo

Botanical garden Aquarium Hall theater Shrine Temple Church Castle Pasture Racecourse Department store DIY shop Hotels Roadside station Airport Heliport Ferry landing Tourism pier Tower Lighthouse Cemetery Public facility Police station Fire station Hospital Post office NTT High school Primary school Junior high school University College Automobile-related facilities Hot Springs Amusement parks and other Equestrian club Campsite Bowling alley Sports Facilities Golf course Other sports Baseball field Stadium

Gymnasium Ski resort Bathing beach Yacht harbor Motor sports Search and root-related Map-related Congestion information related CRA4803-A Page 236

NSCP-W Distribution source Navigation & Audio book Navigation mounting record book Mounting store name and mounting shop name Mounting Date Mounting when traveling kilometers Remarks (Such as repair note and guarantee inheritance information) CRA4803-A

View more...

Comments

Copyright ©2017 KUPDF Inc.