NPT Product Line SS
Short Description
Linea de productos de la marca ECI...
Description
NPT Product Line Version 2.1
System Specifications
Your Partner for Growth
NPT System Specifications V2.1 Catalog No: X39971 May 2013 3rd
ECI's NPT series product lines comply with MEF9 and MEF14 standards.
ECI's qualification lab is accredited by A2LA for competence in electrical testing according to the International Standard ISO IEC 17025-2005 General Requirements for the Competence of Testing and Calibration Laboratories. © Copyright by ECI, 2012-2013. All rights reserved worldwide. This is a legal agreement between you, the end user, and ECI Ltd. (“ECI”). BY OPENING THE DOCUMENTATION AND/OR DISK PACKAGE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN THE UNOPENED DOCUMENTATION AND/OR DISK PACKAGE AND THE ACCOMPANYING ITEMS (INCLUDING WRITTEN MATERIALS AND BINDERS OR OTHER CONTAINERS), TO THE PLACE FROM WHICH YOU OBTAINED THEM. The information contained in the documentation and/or disk is proprietary and is subject to all relevant copyright, patent, and other laws protecting intellectual property, as well as any specific agreement protecting ECI's rights in the aforesaid information. Neither this document nor the information contained in the documentation and/or disk may be published, reproduced, or disclosed to third parties, in whole or in part, without the express prior written permission of ECI. In addition, any use of this document, the documentation and/or the disk, or the information contained therein for any purposes other than those for which it was disclosed, is strictly forbidden. ECI reserves the right, without prior notice or liability, to make changes in equipment design or specifications. Information supplied by ECI is believed to be accurate and reliable. However, no responsibility whatsoever is assumed by ECI for the use thereof, nor for the rights of third parties, which may be affected in any way by the use and/or dissemination thereof. Any representation(s) in the documentation and/or disk concerning performance of ECI product(s) are for informational purposes only and are not warranties of product performance or otherwise, either express or implied. ECI's standard limited warranty, stated in its sales contract or order confirmation form, is the only warranty offered by ECI. The documentation and/or disk is provided “AS IS” and may contain flaws, omissions, or typesetting errors. No warranty is granted nor liability assumed in relation thereto, unless specifically undertaken in ECI's sales contract or order confirmation. Information contained in the documentation and in the disk is periodically updated, and changes will be incorporated in subsequent editions. If you have encountered an error, please notify ECI. All specifications are subject to change without prior notice. The documentation and/or disk and all information contained therein is owned by ECI and is protected by all relevant copyright, patent, and other applicable laws and international treaty provisions. Therefore, you must treat the information contained in the documentation and disk as any other copyrighted material (for example, a book or musical recording). Other Restrictions. You may not rent, lease, sell, or otherwise dispose of the documentation and disk, as applicable. YOU MAY NOT USE, COPY, MODIFY, OR TRANSFER THE DOCUMENTATION AND/OR DISK OR ANY COPY IN WHOLE OR PART, EXCEPT AS EXPRESSLY PROVIDED IN THIS LICENSE. ALL RIGHTS NOT EXPRESSLY GRANTED ARE RESERVED BY ECI. All trademarks mentioned herein are the property of their respective holders. ECI shall not be liable to you or to any other party for any loss or damage whatsoever or howsoever caused, arising directly or indirectly in connection with this documentation and/or disk, the information contained therein, its use, or otherwise. Notwithstanding the generality of the aforementioned, you expressly waive any claim and/or demand regarding liability for indirect, special, incidental, or consequential loss or damage which may arise in respect of the documentation and/or disk and/or the information contained therein, howsoever caused, even if advised of the possibility of such damages. The end user hereby undertakes and acknowledges that they read the "Before You Start/Safety Guidelines" instructions (when provided by ECI) and that such instructions were understood by them. It is hereby clarified that ECI shall not be liable to you or to any other party for any loss or damage whatsoever or howsoever caused, arising directly or indirectly in connection with you fulfilling and/or failed to fulfill in whole or in part the "Before You Start/Safety Guidelines" instructions. All graphics included in this document are for illustrative purposes only and might not correspond with your specific product version.
Contents 1
Overview ............................................................................................ 1-1 All-Native Transport ............................................................................................................... 1-1 Introducing the NPT Product Line ......................................................................................... 1-2
2
NPT-1600/NPT-1600C Specifications ............................................... 2-1 Electrical Interface Connection Modules ............................................................................... 2-1 PDH and SDH Interface Specifications ................................................................................. 2-2 SDH Interfaces ...................................................................................................................... 2-4 NPT MPLS/Ethernet Card Summary .................................................................................. 2-13 Data Cards ........................................................................................................................... 2-13 Optical Components ............................................................................................................ 2-21 CWDM Frequencies and Wavelengths (ITU-T Rec. G.694.2 for CWDM) ......................... 2-45 C Band Channel Frequencies and Wavelengths (ITU-T Rec. G.694.1 for DWDM) .......... 2-45 Physical Specifications ........................................................................................................ 2-48 Environmental Conditions.................................................................................................... 2-51 EMC ..................................................................................................................................... 2-52 Safety ................................................................................................................................... 2-52 Reliability .............................................................................................................................. 2-52 Management Specifications ................................................................................................ 2-52
3
NPT-1200 Specifications ................................................................... 3-1 Cross-Connect Specifications ............................................................................................... 3-1 Traffic Protection.................................................................................................................... 3-2 Redundancy ........................................................................................................................... 3-2 Tributary Protection ............................................................................................................... 3-2 Synchronization ..................................................................................................................... 3-3 Acoustic Noise ....................................................................................................................... 3-3 Jitter and Wander .................................................................................................................. 3-3 I/O Interfaces ......................................................................................................................... 3-3 Management .......................................................................................................................... 3-4 SDH Interfaces ...................................................................................................................... 3-5 Ethernet Specifications ........................................................................................................ 3-13 Optical Amplifier Modules .................................................................................................... 3-32 Dispersion Compensation Modules .................................................................................... 3-33 EM_10E Specifications........................................................................................................ 3-33 SM_10E Specifications........................................................................................................ 3-34 Physical Specifications ........................................................................................................ 3-39
4
NPT-1020 Specifications ................................................................... 4-1 NPT-1020 Shelf Capacity ...................................................................................................... 4-1 Cross-Connect Specifications ............................................................................................... 4-1 Cross-Connect Levels ........................................................................................................... 4-1 Cross-Connect Capacity........................................................................................................ 4-1 Switching Specifications ........................................................................................................ 4-1 Redundancy ........................................................................................................................... 4-1 Synchronization ..................................................................................................................... 4-1 Traffic Protection.................................................................................................................... 4-2 Jitter and Wander .................................................................................................................. 4-2 I/O Interfaces ......................................................................................................................... 4-2
ECI Telecom Ltd.
ECI Telecom Ltd. Proprietary
i
Contents
NPT Product Line System Specifications
Management .......................................................................................................................... 4-3 SDH Interfaces ...................................................................................................................... 4-4 Ethernet Specifications .......................................................................................................... 4-7 Optical Amplifier Modules .................................................................................................... 4-12 Dispersion Compensation Modules .................................................................................... 4-12 EM_10E Specifications........................................................................................................ 4-13 SM_10E Specifications........................................................................................................ 4-13 Physical Specifications ........................................................................................................ 4-18
A.
Standards and References ............................................................... A-1 Broadband Forum ................................................................................................................. A-1 Environmental Standards ..................................................................................................... A-1 ETSI: European Telecommunications Standards Institute .................................................. A-1 IEC: International Electrotechnical Commission .................................................................. A-2 IEEE: Institute of Electrical and Electronic Engineers ......................................................... A-3 IETF: Internet Engineering Task Force ................................................................................ A-3 ISO: International Organization for Standardization ............................................................ A-6 ITU-T: International Telecommunication Union ................................................................... A-6 MEF: Metro Ethernet Forum ................................................................................................. A-9 NIST: National Institute of Standards and Technology ...................................................... A-10 North American Standards ................................................................................................. A-10 OMG: Object Management Group ..................................................................................... A-11 TMF: TeleManagement Forum........................................................................................... A-11 Web Protocol Standards..................................................................................................... A-11
ii
ECI Telecom Ltd. Proprietary
ECI Telecom Ltd.
List of Figures Figure 1-1: Dual matrix approach ................................................................................................................... 1-1 Figure 1-2: NPT packet and TDM capabilities ................................................................................................ 1-2
ECI Telecom Ltd.
ECI Telecom Ltd. Proprietary
iii
List of Tables Table 2-1: STM-1 transceivers ....................................................................................................................... 2-5 Table 2-2: STM-1 bidirectional transceivers ................................................................................................... 2-5 Table 2-3: STM-4 transceivers ....................................................................................................................... 2-7 Table 2-4: STM-4 bidirectional transceivers ................................................................................................... 2-7 Table 2-5: STM-16 transceivers ..................................................................................................................... 2-9 Table 2-6: STM-16 bidirectional transceivers ................................................................................................. 2-9 Table 3-1: NPT-1200 TDM capacity per I/O slot ............................................................................................ 3-1 Table 3-2: NPT-1200 packet capacity per I/O slot ......................................................................................... 3-2 Table 3-3: STM-1 interface ............................................................................................................................. 3-5 Table 3-4: STM-1 bidirectional transceivers ................................................................................................... 3-6 Table 3-5: STM-4 transceivers ....................................................................................................................... 3-7 Table 3-6: STM-4 bidirectional transceivers ................................................................................................... 3-7 Table 3-7: STM-16 transceivers ..................................................................................................................... 3-8 Table 3-8: STM-16 bidirectional transceivers ................................................................................................. 3-9 Table 3-9: CWDM and DWDM STM-16/GbE interfaces .............................................................................. 3-10 Table 3-10: STM-64 non-colored interface (XFPs) ...................................................................................... 3-10 Table 3-11: STM-64 colored interface (XFPs) .............................................................................................. 3-11 Table 3-12: STM-64 bidirectional transceivers (XFPs) ................................................................................. 3-12 Table 3-13: TDM Ethernet Layer 1 cards ..................................................................................................... 3-13 Table 3-14: TDM Ethernet Layer 2/MPLS-TP cards .................................................................................... 3-13 Table 3-15: Hybrid Ethernet Layer 2/MPLS-TP cards .................................................................................. 3-14 Table 3-16: GbE/FX client transceivers ........................................................................................................ 3-28 Table 3-17: GbE bidirectional client transceivers ......................................................................................... 3-29 Table 3-18: SFP+ client transceivers ........................................................................................................... 3-29 Table 3-19: Table 3-19: -11.3 (Stressed) ..................................................................................................... 3-30 Table 3-20: SFP+ C/DWDM transceivers ..................................................................................................... 3-31 Table 3-21: CSFP client transceivers ........................................................................................................... 3-31 Table 3-22: Optical amplifier specifications .................................................................................................. 3-32 Table 3-23: OM_DCMxx specifications ........................................................................................................ 3-33 Table 3-24: FXO and FXS specifications ..................................................................................................... 3-35 Table 4-1: STM-1 interface ............................................................................................................................. 4-4 Table 4-2: STM-1 bidirectional transceivers ................................................................................................... 4-5 Table 4-3: STM-4 transceivers ....................................................................................................................... 4-5 Table 4-4: STM-4 bidirectional transceivers ................................................................................................... 4-6 Table 4-5: GbE/FX client transceivers .......................................................................................................... 4-10 Table 4-6: GbE bidirectional client transceivers ........................................................................................... 4-11 Table 4-7: Optical amplifier specifications .................................................................................................... 4-12 Table 4-8: OM_DCMxx specifications .......................................................................................................... 4-12 Table 4-9: FXO and FXS specifications ....................................................................................................... 4-14
ECI Telecom Ltd.
ECI Telecom Ltd. Proprietary
v
1
Overview
All-Native Transport All-Native transport is ECI's architecture to support PTN. All-Native transport is based on native handling of both packet and TDM by the same network element (NE). The Ethernet traffic is processed natively and delivered over Ethernet interfaces without traversing the TDM component of the dual matrix. The TDM traffic is cross connected via the TDM HO/LO component of the dual matrix. Keeping the TDM and Ethernet switching fabrics independent enables complete separation between the different traffic types, preventing one type of traffic load from adversely affecting the other.
Figure 1-1: Dual matrix approach The All-Native approach offers the most cost-efficient traffic handling in a mixed TDM and packet environment while supporting all the necessary PTN attributes. Using native handling allows a gradual and controlled shift from TDM-based infrastructure to packet-based infrastructure, while also minimizing risk by eliminating complex and costly encapsulation schemes to carry Ethernet over TDM or TDM over Ethernet.
ECI Telecom Ltd.
ECI Telecom Ltd. Proprietary
1-1
Overview
NPT Product Line System Specifications
Introducing the NPT Product Line NPT is a family of future-proof, carrier-grade converged multiservice packet optical transport platforms, optimized for metro packet transport networks. NPT offers a unique convergence of Carrier Ethernet, MPLS-TP, SDH/SONET, TDM, WDM, OTN, and ROADM on a single platform. NPT provides carrier-class packet transport, combining the gold standard of transport network reliability and ease of management with packet efficiency. In addition to the All-Native support for pure Ethernet and TDM traffic, NPT supports the full range of traffic combinations, including Ethernet/MPLS-TP over TDM (EoS/MoT) and TDM over Ethernet (CES), providing maximum flexibility for the widest range of network scenarios.
Figure 1-2: NPT packet and TDM capabilities The NPT product line supports a full set of Carrier Ethernet services and features including QoS, protection, OAM, and synchronization to assure undisrupted service delivery. Integrated WDM, OTN, and ROADM allow seamless integration with next generation optical networks. By supporting the most advanced carrier class Ethernet-based services (L1, L2, MPLS-TP), the NPT is well positioned to deliver cellular backhaul transition/migration plans from TDM to Ethernet as well as for new build outs of LTE and 4G networks, support for full triple play services for residential NGN applications, and utility company transitions to packet, CoC, and business applications. The NPT is ideal for network convergence at the metro/access aggregation level, reducing the risks associated with the shift to packet based transport and giving you a smooth migration path to next generation packet based networks. The NPT family of products is managed by the LightSoft® NMS. The NPT's value propositions include:
Efficiency through ultimate flexibility Choice of packet and TDM handling options - native packet, native TDM, TDM over packet, and packet over TDM Unique build-as-you-grow architecture Converged packet, optics, and TDM
1-2
ECI Telecom Ltd. Proprietary
ECI Telecom Ltd.
Overview
NPT Product Line System Specifications
Simplicity through MPLS-TP Simple, easy-to-manage NEs Scalable solution for the metro Transport grade QoS, OAM, and synchronization
Full control through transport management Well proven, centralized, GUI-based NMS Unified multi-layer control (packet, optics, TDM) Easy Data Management Suite (EDMS)
The NPT keeps TCO to a minimum throughout the network life cycle by providing an affordable, scalable, and easy to manage PTN.
ECI Telecom Ltd.
ECI Telecom Ltd. Proprietary
1-3
Overview
NPT Product Line System Specifications
1-4
ECI Telecom Ltd. Proprietary
ECI Telecom Ltd.
2
NPT-1600/NPT-1600C Specifications
Electrical Interface Connection Modules Electrical I/O cards are assigned an interface connection module. This module serves as the I/O card electrical line transceiver and is connected to the I/O cards via the NPT backplane. For example, when eleven PIO2_84 I/O cards are installed in the NPT-1600 cards cage, eleven M2_84xx connection modules should be installed in the modules cage. In this case, if hardware protection is required, one PIO2_84 I/O card can be configured as the protection card, and the corresponding protection connection module M2_84P I/O is installed in the appropriate slot of the NPT-1600 modules cage. I/O slot 12 is always configured as a pure optical slot without a modules cage module.
Connection Module Data for Electrical I/O Cards I/O card
Bitrate (Mbps)
I/O ports
Module
Interface type
Function/Description
SIO1&4
155
16
M1_16BT
SDH electrical
Connection module
8 PIO345
34/45/52
16
8
PIO2_84
PIO2_21
2.048
2.048
84
21
M1_16DIN
SDH electrical
Connection module
M1_16P
-
Connection module with protection Connection module
M1_8BT
SDH electrical
M1_8DIN
SDH electrical
Connection module
M345_16BT
PDH
Connection module
M345_16DI
PDH
Connection module
M345_16P
PDH
Connection module with protection
M345_8BT
PDH
Connection module
M345_8DI
PDH
Connection module
M345_8BN
PDH
Connection module
M2_84B
PDH
Balanced (120 Ω) connection module
M2_84BR
PDH
Low-cost, balanced (120 Ω) connection module, without protection
M2_84U
PDH
Unbalanced (75 Ω) connection module
M2_84UR
PDH
Low-cost, unbalanced (75 Ω) connection module, without protection
M2_84P1
PDH
Connection module with protection
M2_21B
PDH
Balanced (120 Ω) connection module
PDH
Unbalanced (75 Ω) connection module
PDH
Connection module with protection
M2_21U 2
M2_84P
1 2
Protection module M2_84P can be used to protect PIO2_84. Protection module M2_84P can be used to protect PIO2_84.
ECI Telecom Ltd.
ECI Telecom Ltd. Proprietary
2-1
NPT-1600/NPT-1600C Specifications
NPT Product Line System Specifications
Optical transceivers for I/O cards Optical I/O cards use a slide-in optical transceiver, which is directly plugged into the card for signal interfacing. I/O card
Optical module
Connector type
I/O ports per optical module
Modules per I/O card
Ports per I/O card
SIO1&4
OM01_4
LC
4
4
16 x STM-1/OC-3
OM04_1
SC/LC
1
4
4 x STM-4/OC-12
SIO16
OM16_1
SC/LC
1
2
2 x STM-16/OC-48
SIO64
OM64_1
LC
1
1
1 x STM-64/OC-192/OTU2
SIO164
OMSC16_4
LC
4
1
4 x STM-16/OC-48/OTU1
OMTX10_EF
LC
1
1
1 x STM-64/OC-192/OTU2
OMTX10
LC
1
1
1 x STM-64/OC-192/OTU2
OMTX10_S
LC
1
1
1 x STM-64/OC-192/OTU2
Optical SFP transceivers for I/O cards New optical I/O cards use a high flexibility concept, consisting of slide-in optical modules. Each module has slots for up to four SFP transceivers. I/O card
Optical module
Connector type
I/O ports per optical module
SIO1&4
OMS01_43
LC
1 to 4
4
16 x STM-1/OC-3
4
LC
1
4
4 x STM-4/OC-12
OMS04_1
Modules per I/O card
Ports per I/O card
SIO16
OM16_1SFP5
LC
1
2
2 x STM-16/OC-48/OTU1
SIO164
OMSC16_4
LC
4
1
4 x STM-16/OC-96/OTU2
PDH and SDH Interface Specifications 2 Mbps (E1) Physical level ........................................................................................................................ G.703, Paragraph 6 Frame.................................................................................................................. Unframed, G.704, I.431 (ISDN) Line code .................................................................................................................................................... HDB3 Line impedance ..............................................................................................120 Ω balanced/75 Ω unbalanced
34 Mbps (E3) Physical level ........................................................................................................................ G.703, Paragraph 8 Frame.......................................................................................................................................................... G.751 Line code .................................................................................................................................................... HDB3 Line impedance ........................................................................................................................ 75 Ω unbalanced
3 4 5
SFP SDH transceivers starting system version V 5.0, DWDM SFPs release V6.2. SFP SDH transceivers starting system version V 5.0, DWDM SFPs release V6.2. SFP SDH transceivers starting system version V 5.0, DWDM SFPs release V6.2.
2-2
ECI Telecom Ltd. Proprietary
ECI Telecom Ltd.
NPT-1600/NPT-1600C Specifications
NPT Product Line System Specifications
45 Mbps (DS-3) Physical level ........................................................................................................................ G.703, Paragraph 5 Frame.......................................................................................................................................................... G.751 Line code .....................................................................................................................................................B3ZS Line impedance ........................................................................................................................ 75 Ω unbalanced
52 Mpbs (STS-1) Physical level ............................................................................................................................... GR-253-CORE Frame.......................................................................................................................................................... G.253 Line code ....................................................................................................................................................... CMI Line impedance ........................................................................................................................ 75 Ω unbalanced
STM-1 Electrical Physical level ...................................................................................................................... G.703, Paragraph 12 Frame.......................................................................................................................................................... G.707 Line code ....................................................................................................................................................... CMI
STM-1/OC-3 Optical Physical level ................................................................................................................................ G.957, Table 2 Wavelength ............................................................................................................................ 1310 nm, 1550 nm Short-haul, long-haul bitrate ............................................................................................155.52 Mbps ±4.6 ppm
STM-4/OC-12 Optical Physical level ................................................................................................................................ G.957, Table 3 Wavelength ............................................................................................................................ 1310 nm, 1550 nm Short-haul, long-haul, very long-haul, ultra long-haul bitrate................................................622 Mbps ±4.6 ppm
STM-16/OC-48 Optical Physical level ................................................................................................................................ G.957, Table 4 Wavelength ........................................................................................................................... 1310 nm, 1550 nm Short-haul, long-haul, very long-haul, ultra long-haul, DWDM (G.694.1 and G.957) bitrate ..............................................................................2488.32 Mbps ±4.6 ppm
STM-64/OC-192 Optical Physical level .................................................................................................................... G.691, G.957, Table 5 Wavelength ........................................................................................................................... 1310 nm, 1550 nm Short-haul, long-haul, very long-haul, DWDM (G.694.1) bitrate....................................9953.28 Mbps ±4.6 ppm
ECI Telecom Ltd.
ECI Telecom Ltd. Proprietary
2-3
NPT-1600/NPT-1600C Specifications
NPT Product Line System Specifications
SDH Interfaces STM-1/OC-3 (155.52 Mbps ±4.6 ppm) I/O Modules OM01_4I36
CARD NAME
OM01_4S3
OM01_4L5
S-1.1
L-1.2
1270-1380
1261-1360
1480-1580
Source type
MLM
SLM
SLM
Max. RMS width (nm)
-
7.7
-
Max. -20 dB width (nm)
-
-
1
Min. side mode suppression ratio (dB)
-
-
> 30
Min. mean launched power (dBm)
-19
-15
-5
Max. mean launched power (dBm)
-14
-8
0
Min. extinction ratio (dB)
10
8.2
10
Min. sensitivity (BER of 1*10-12) EOL (dBm)
-30
-28
-34
Min. overload (dBm)
-
-8
-10
Max. receiver reflectance (dB)
-
-
-25
Max. dispersion (ps/nm)
-
96
-
Min. optical return loss of cable (dB)
-
-
-20
APPLICATION CODE7 Operating wavelength (nm) TRANSMITTER
RECEIVER
Max. discrete reflectance (dB)
-
-
-25
Max. optical path penalty (dB)
1
1
1
MECP_OSC cards CARD NAME
MECP_OSC5
MECP_OC5OW [MECP_OC5XOW]
MECP_OC5UOW8
Operating wavelength (nm)
1500-1520
1500-1520
1500-1520
Signal Rate
155 Mbps
155 Mbps
2 Mbps
TRANSMITTER
Source type
SLM
SLM
SLM
Max. RMS width (nm)
-
-
-
Max. -20 dB width (nm)
1
1
1
Min. side mode suppression ratio (dB)
> 30
> 30
> 30
Min. mean launched power (dBm)
0
0
+1
Max. mean launched power (dBm)
+2
+5
+5
Min. extinction ratio (dB)
10
10
10
-34
-35 [-40]
-54
RECEIVER
Min. sensitivity (BER of 1*10-10) EOL (dBm)
6 7 8
MLM transceiver for 2 km with multimode fibers. Application code is in reference to ITU-T Recommendation G.691. No interoperability possible between MECP_OC5UOW and the other MECP_OSC modules.
2-4
ECI Telecom Ltd. Proprietary
ECI Telecom Ltd.
NPT-1600/NPT-1600C Specifications
NPT Product Line System Specifications CARD NAME
MECP_OSC5
MECP_OC5OW [MECP_OC5XOW]
MECP_OC5UOW8
Min. overload (dBm)
-10
-8
-5
Max. receiver reflectance (dB)
-25
-
-
Max. dispersion (ps/nm)
-
-
-
Min. optical return loss of cable (dB)
-20
-20
-
Max. discrete reflectance (dB)
-25
-25
-25
Max. optical path penalty (dB)
1
1
1
OPTICAL PATH BETWEEN S AND R
STM-1/OC-3 SFP Optical Transceivers for OMS01_4 Table 2-1: STM-1 transceivers 9
SFP TRANSCEIVER NAME APPLICATION CODE
10
Operating wavelength (nm)
OTR1_S3
OTR1_L3
OTR1_L5
S-1.1
L-1.1
L-1.2
1261-1360
1263-1360
1480-1580
11
OTR1_X5
OTR1_VL5
1500-1520
1500-1520
Source type
MLM
SLM
SLM
SLM
SLM
Max. RMS width (nm)
7.7
-
-
-
-
Min. side mode suppression ratio (dB)
-
30
30
> 30
> 30
Min. mean launched power (dBm)
-15
-5
-5
0
+1
Max. mean launched power (dBm)
-8
0
0
+5
+5
Min. extinction ratio (dB)
8.2
10
10
10
10
Min. sensitivity (BER of 1*10-12) EOL (dBm)
-28
-34
-34
-35
-42
Min. overload (dBm)
-8
-10
-10
-8
-5
Max. receiver reflectance (dB)
-
-
-25
-
-
Max. dispersion [ps/nm]
96
-
-
-
-
Min. optical return loss of cable (dB)
-
-
-20
-20
-
Max. discrete reflectance (dB)
-
-
-25
-25
-25
Max. optical path penalty (dB)
1
1
1
1
1
NOTE: When selecting bidirectional transceivers, pay attention that they must operate in complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD; OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following table are arranged in complementary pairs. Table 2-2: STM-1 bidirectional transceivers SFP transceiver name
OTR1-S3BD
OTR1-S5BD
OTR1-L3BD
OTR1-L5BD
Application code12
BD 313
BD 514
L3BD
L5BD
Operating wavelength (nm)
1260-1360
1480-1580
1280-1360
1480-1580
Source type
MLM
MLM
MLM
SLM
Max. RMS width (nm)
7
3
4
1
TRANSMITTER
9
New optical SFP transceivers for existing SIO1&4B basecard. Application code is in reference to ITU-T Recommendation G.691. MultiLongitudinal Mode (MLM) source type laser can also operate with single mode fibers for S-1.1 interfaces in reference to ITU-T Recommendation G.957. 12 Application code is in reference to ITU-T Recommendation G.691. 13 BD 3: STM-1 single-fiber bidirectional SFP module with a 1310 nm TX wavelength. 14 BD 5: STM-1 single-fiber bidirectional SFP module with a 1550 nm TX wavelength. 10 11
ECI Telecom Ltd.
ECI Telecom Ltd. Proprietary
2-5
NPT-1600/NPT-1600C Specifications
NPT Product Line System Specifications
SFP transceiver name
OTR1-S3BD
OTR1-S5BD
OTR1-L3BD
Application code12
BD 313
BD 514
L3BD
OTR1-L5BD L5BD
Min. side mode suppression ratio (dB)
-
-
-
30
Min. mean launched power (dBm)
-14
-14
-5
-5
Max. mean launched power (dBm)
-8
-8
0
0
Min. extinction ratio (dB)
10
10
10
10
-32
-32
-32
-32
RECEIVER15 Min. sensitivity (BER of 1 * 10-12) EOL (dBm) Min. overload (dBm)
-8
-8
0
0
Max. receiver reflectance (dB)
-
-
-
-
Max. dispersion (ps/nm)
-
-
-
-
Min. optical return loss of cable (dB)
-20
-20
-
-
Max. discrete reflectance (dB)
-
-
-
-
Max. optical path penalty (dB)
1
1
1
1
OPTICAL PATH BETWEEN S & R
STM-4/OC-12 (622 Mbps ±4.6 ppm) I/O Modules CARD NAME
OM4_1I316
OM4_1S3
OM4_1L5
S-4.1
L-4.2
1270-1380
1274-1356
1480-1580
Source type
MLM
SLM
SLM
Max. RMS width (nm)
-
4
1
Max. -20 dB width (nm)
-
-
1
Min. side mode suppression ratio (dB)
-
-
> 30
Min. mean launched power (dBm)
-19
-15
-3
Max. mean launched power (dBm)
-14
-8
+2
Min. extinction ratio (dB)
10
8.2
10
Min. sensitivity (BER of 1*10-12) EOL (dBm)
-31
-28
-28
Min. overload (dBm)
-
-8
-8
Max. receiver reflectance (dB)
-
-
-27
Max. dispersion (ps/nm)
-
74
-
Min. optical return loss of cable (dB)
-
-
-24
Max. discrete reflectance (dB)
-
-
-27
Max. optical path penalty (dB)
1
1
1
APPLICATION CODE17 Operating wavelength (nm) TRANSMITTER
RECEIVER
OPTICAL PATH BETWEEN S AND R
15 16 17
Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type. MLM transceiver for 2 km with multimode fibers. Application code is in reference to ITU-T Recommendation G.691.
2-6
ECI Telecom Ltd. Proprietary
ECI Telecom Ltd.
NPT-1600/NPT-1600C Specifications
NPT Product Line System Specifications
STM-4/OC-12 SFP Optical Transceivers for OMS04_1 Table 2-3: STM-4 transceivers SFP TRANSCEIVER NAME18
OTR4_S3
OTR4_L3
OTR4_L5
APPLICATION CODE19
S-4.1
L-4.1
L-4.2
Operating wavelength (nm)
1274-1356 1293-1334
1296-1330 1300-1325
1480-1580
Source type
MLM20
MLM21
SLM
Max. RMS width (nm)
4/2.5
-
-
Max. -20 dB width (nm)
-
1
View more...
Comments
