Nokia Nsn Flexi Wcdma Bts Commissioning and Integration

CLICK CONNECT

OPEN THE NOKIA BTS MANAGER

WCDMA BTS IS GETTING CONNECTED

FRGC NOT DETECTED CHECK THE HARDWARE AND OPTIC FIBER IS CONNECTED PROPERLY. MOSTLY FIBER OR PATCH CORD IS FAULTY IN THIS CASE

SELECT THE REQUIRED CONFIGURATION FOR COMMISSIONING THE WCDMA BTS 1. 2. 3. 4. 5. 6. 7.

BTS SITE: FOR COMPLETE BTS AND TRS COMMISSIONING. BTS ONLY: FOR ONLY BTS CONFIGURATION. TRS ONLY: FOR TRS CONFIGURATION. TEMPLET : PLANNED : IF THE BTS SCRIPT IS PREMADE. MANUAL : TO CONFIGURE THE BTS ON SITE. RECONFIGURING: IF THE BTS IS CONFIGURED AND NEED TO CHANGE THE FEW PARAMETERS.

1.

FILL THE SITE INFORMATION.

2.

ADD BTS ID – BTS ID CAN BE OBTAINED FROM THE NETWORK PLANNER OR THE SITE ID CAN BE THE BTS ID – (WHERE 3 REPRESENTS 3G AND FOLLOWING NUMBERS REPRESENT THE BTS ID.

3.

A2EA WILL APEAR AUTOMATICALLY AS SOON THE BTS ID FILLED.

4.

IP ADDRESS: IP ADDRESS CAN BE OBTAINED FROM THE NETWORK OPERATOR OR FROM BSC.

5. CLICK NEXT AFTER FILLING ALL THE DATA.

MARK IF IN USE AS PER THE AVIALABLE E1 – 1ST E1 : PRIMARY – IMA33. 2ND E1 : SECONDARY – IMA33

TRAFFIC DESCRIPTOR: NOTE: TRAFFIC DESCRIPTOR DATA CAN BE OBTAINED FROM NETWORK OPERATOR OR FROM BSC. TRAFFIC DESCRIPTOR WITH 2E1

CBR

CBR

CBR

CBR

CBR

CBR

CBR

CNBAP

DNBAP

AAL2SIG

USERPLANE

DCN

DCN

VP1

VC 42

VC52

VC 62

VC 72

VP2

VC32

8790

150

300

150

8190

120

120

TRAFFIC DESCRIPTOR WITH 1E1

CBR

CBR

CBR

CBR

CBR

UBR

UBR

CNBAP

DNBAP

AAL2SIG

USERPLANE

DCN

DCN

VP1=1

VC 42

VC52

VC 62

VC 72

VP2

VC32

4377

80

150

80

4067

151

151

TRAFFIC DESCRIPTOR CAN ALSO BE OBTAINED FROM NETWORK OPRATOR

DEFINING IUB

ATM INTERFACE VPI VP TRADE

IMA Group 33 32 VP1-CBR.1/8790

IMA Group 33 32 VP1-CBR.1/4377

Common NBAP VCI VC TRADE

42 CNBAP-CBR.1/150

42 CNBAP-CBR.1/80

Dedicated NBAP VCI VC TRADE

52 DNBAP-CBR.1/300

52 DNBAP-CBR.1/150

AAL2 Signalling VCI VC TRADE

62 AAL2SIG-CBR.1/150

62 AAL2SIG-CBR.1/80

AAL2 User Paths VCI TRADE

72

72

VC32-CBR.1/120

VC32-CBR.1/151

1. 2.

DEFINE BTS SETTINGS REAL TILT : IF USED. (GET THE IP ADDRESS FOR REAL TILT FROM NETWORK OPERATOR 3. MODULE LOCATION : DEFINE THE LOCATION OF THE MODULE WITH MODULE ID 3218 WHERE 3 REPRESENTS 3G AND 218 REPRESENTS THE SITE ID. NOTE: DIFFERENT MODULES CAN BE OF SAME ID. 4. PASSIVE UNIT : DEFINE THE SL.NO FOR THE CABINET ETC.

DEFINE ANT ID 32181. WHERE 3 REPRESENTS 3G, 218 REPRESENTS SITE ID AND 1 REPRESENTS SECTOR NUMBER

DEFINE THE ANTENNA PORT SETTING FOR SECTOR 1

DEFINE ANT ID 32182. WHERE 3 REPRESENTS 3G, 218 REPRESENTS SITE ID AND 2 REPRESENTS SECTOR NUMBER

DEFINE THE ANTENNA PORT SETTING FOR SECTOR 2

DEFINE ANT ID 32183. WHERE 3 REPRESENTS 3G, 218 REPRESENTS SITE ID AND 3 REPRESENTS SECTOR NUMBER

DEFINE THE ANTENNA PORT SETTING FOR SECTOR 3

CLICK NEXT

DEFINE IF MHA IS IN USE

DEFINE ALARMS IF CONNECTED TO THE WCDMA BTS

COMMISSIONING IS DONE SEND THE PARAMETER TO THE BTS

SAVE THE PARAMETER TO THE DISK

SAVE THE PARAMETER TO THE DISK

SENDING THE PARAMETERS TO THE WCDMA BTS

RESETTING THE WCDMA BTS

NOW THE NOKIA FLEXI WCDMA BTS IS CONFIGURED ALL THE DATA ARE SENT TO THE BTS.

CHECK FOR THE ALRMS IF ANY.

LAUNCH FLEXI HUB MANAGER TO CONFIGURE FTFA