NetAct PlanEditor & CM Guidelines v1.0
Short Description
Descripción: plan edit...
Description
1
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
V1.0
Endy Kong
Smart 3G Project
NetAct PlanEditor & CM Guidelines
2
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
• Features of CM application: • CM Editor can do plan creation, actual configuration viewing, parameter mass modification, etc. • CM Plan Manager to export network parameter dump and import xml file as a plan. • CM Provisioner is to provision or activate the created plan. • CM Analyser is to perform consistency check of radio configuration data, both actual and plans.
• Features of PlanEditor: • Import RNC & BSC xml dump into MS Access Database format. • Offline viewing of RAN or BSS parameter. • Perform network inconsistency check via SQL queries. • Template based object creation or plan based object deletion. • Doing mass modification of RAN or BSS parameter.
• Provide a simple guide how to use NetAct PlanEditor and OSS CM applications.
• Discussion on the LACE implementation concept for radio planning.
Objectives
3
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
LACE Radio Implementation Concept
4
ATM Cross Connect (AXC)
•
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
• Chain from network planning to site commissioning: transmission and radio network plans transferred through the tool chain down to RNC and network elements.
• LACE produces an integrated tool chain set for planned commissioning of WDCMA BTS and AXC.
WCDMA BTS
•
• Support 3G rollout by focusing on two important network elements:
Light Automated Commissioning Environment
5
© NOKIA
Transport
AXC Physical Templates
Radio Network
WBTS Physical Templates
RNW Logical Templates
Plan Editor
NetAct Plan Editor
Expert Content
Planner
WCDMA
Planner
Transmission
Presentation_Name.PPT / DD-MM-YYYY / Initials
Radio Network Planner
Transport Network Planner
NetAct Planner
LMT
LMT
SCF for WBTS
AXC
WBTS
Commissioning Engineer SCF for WBTS SCF for AXC RNW Plan
RNC
RNW Plan
SCF for AXC
Site Configuration Tool
SCFs for AXC & WBTS
Plan Management
RNW Plan
ATM Transmission Plan
AXC SCF also contains
NetAct Radio Access Configurator
3G Rollout Support (Automated Commissioning)
Required
6
© NOKIA
DCN OPERATIONAL
REMOTE ACCESS TO WBTS
Presentation_Name.PPT / DD-MM-YYYY / Initials
SITE OPERATIONAL
4. RNW plan download and activation
3. WBTS commissioning
2. RNC ATM layer setup
Radio Access Configurator Engineer
Commissioning Engineer
Radio Access Configurator Engineer
Network Planning Engineer
1. RNW Plan & WBTS HW parameters preparation PLAN READY
RESPONSIBLE PERSON
TASK
WCDMA BTS Integration Overview
7
WBTS
AXC Element Manager
AXC
Presentation_Name.PPT / DD-MM-YYYY / Initials
Network Elements
WBTS Element manager
Element Managers
© NOKIA
WCDMA & Transmision Planner
RNC
Management
RAN Plan
PlanEditor
Radio Access Configurator
Site Configuration Tool
NetActTM
NetActTM Planner
Result: DCN operational
•
Result: Remote access to BTS
•
Tools: RAN Plan Management Result: Site operational
• •
STEP 4 – RNW Plan download and activation
Tools: Site Configuration Tool, WBTS & AXC Element Managers
•
STEP 3 – WBTS commissioning
Tools: Radio Access Configurator
•
STEP 2 – RNC ATM layer setup
RNW Plan for RNC Commissioning file for WBTS
Result:
• a) b)
Tools: NetAct Planner & Plan Editor
•
STEP 1 – RNW Plan & WBTS HW config
WCDMA BTS Integration & Tools
Export plan to Xml
Running query checking
Import .csv
new plan
8
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
* Note: UCE is given the responsibility to maintain the master WBTS & ADJx plan.
Convert to csv format
* Preparing WBTS & ADJx into Excel
Create & activate
Plan Editor
Ready for implementation in OSS&RNC
Verify xml plan
Smart 3G LACE Process Flow in a Nutshell – 1/3
9
© NOKIA
import
.xml
.xml
Presentation_Name.PPT / DD-MM-YYYY / Initials
ADJx .csv .csv
WBTS,WCEL
Export
CM Plan Manager
Import import
NetAct
NetAct NetAct DB DB
upload
CM Provisioner
Activation
NetAct
RNC
Smart 3G LACE Process Flow in a Nutshell – 2/3
10
© NOKIA
ADJS
ADJI
ADJG
ADJW
9
5
CM Provisioner
2
PlanEditor
8
6
CM Plan Manager
NetAct CM Application
Presentation_Name.PPT / DD-MM-YYYY / Initials
parameters
Planned
4
WBTS/WCEL
3
Master Plan
Nokia RF
UCE
1
CM Plan Manager
RNC&OSS
XML
7
all the ADJx plan.
Non-Network Data in CM Plan Manager for
After activation completed, make sure to merge
9. Activate planned parameter into network.
8. Approved and Prepared plan.
7. Import xml into OSS using CM Plan Manager.
6. Export planned parameter into xml.
minimize the errors.
Make sure to run the query check in order to
5. Import planned parameters into PlanEditor.
4. Creation of ADJS/ADJI/ADJG/ADJW into csv.
3. Creation of WBTS & WCEL into csv.
import into PlanEditor.
2. Export actual data from CM Plan Manager and
1. Upload actual configuration from CM Provisioner.
Process:
Smart 3G LACE Process Flow in a Nutshell – 3/3
11
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Upload Actual Network Configuration
12
© NOKIA
CM CM Provisioner Provisioner Upload Upload RNC RNC Parameters Parameters
Presentation_Name.PPT / DD-MM-YYYY / Initials
Start Start
• Uploading process: CM CM Plan Plan Manager Manager Export Export Actual Actual RNC Parameters RNC Parameters
PlanEditor PlanEditor Import Import xml xml file file into MS Access into MS Access Database Database format format
• Because all the changes done in RNW directly, it doesn’t update the OSS database, which might cause inconsistency.
• This is to ensure the actual parameter in RNW database are uploaded into OSS database.
• In order to have the latest RAN parameter from the RNC, we need to perform upload of actual configuration from network.
Upload Actual Configuration of RAN Parameter – 1/2
13
3.3. 4.4.
1.1. 2.2.
1.
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
You Youcan cancheck checkthe thestatus statuson on“State”, “State”, e.g. ongoing, failed or finished. e.g. ongoing, failed or finished.
Select Select. On OnTarget TargetDN, DN,select selecttarget targetRNC RNCthat that you want to upload the configuration. you want to upload the configuration. Click Clickon on totostart startthe theupload. upload.
2.
3.
4.
Upload Actual Configuration of RAN Parameter – 2/2
14
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Export Network Dump
2.
15
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
4.
4.4.
3.3.
1.1. 2.2.
3.
On OnCurrent CurrentView, View,selects selects. . Select SelectRNC RNCororBSC BSCthat thatyou youneed needtoto include includeininthe thenetwork networkdump. dump. Select Selectthe thenecessary necessaryparameter parameterthat that you need to export. you need to export. Select Selectthe thepath pathtotoexport exportthe thexml xml dump, make sure to select “V:\” dump, make sure to select “V:\”drive drive sosothe xml will be exported into your the xml will be exported into your local localhardrive. hardrive.
1.
Export Actual Configuration – 1/2
16
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
• After the export completed, we can start the processing in PlanEditor.
• Below is the major object classes that are needed: • BSC: ADJW, BCF, BSC, BTS, HOC, TRX • RNC: All the object classes • RAC: All the object classes
• The xml dump we export should include objects: BSC-0, EXCC, BSC, and RNC.
Export Actual Configuration – 2/2
17
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Importing XML into PlanEditor
18
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
1.1. 2.2.
2.
Click Clickon on when whenPlanEditor PlanEditorisisopened. opened. Open Openan anempty emptydatabase databasefile filebased basedon on(PE4.4-4(PE4.4-41_empty_for_Smart_v3.3.mdb ), I.e. copy 1_empty_for_Smart_v3.3.mdb), I.e. copyand andrename rename the mdb file to agreed file naming format, e.g. the mdb file to agreed file naming format, e.g. RNC&BSC_OSSx_Dump_08Mar.mdb RNC&BSC_OSSx_Dump_08Mar.mdb(x=1, (x=1,2,2,33oror4) 4)
• We are using NetAct PlanEditor version 4.4-4-1 to do further processing of xml dump.
Import XML into PlanEditor – 1/5
19
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.
1.
1.1. 2.2.
Go Gototo Select Selectthe the‘Profile’ ‘Profile’totobe beimported: imported:
Import XML into PlanEditor – 2/5
20
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
1.1.
Select Selectthe thelatest latestXML XMLparameter parameter dump uploaded from RNC. dump uploaded from RNC.
Import XML into PlanEditor – 3/5
21
© NOKIA
2.
Presentation_Name.PPT / DD-MM-YYYY / Initials
1. 4.
3.
4.4.
2.2. 3.3.
1.1.
Click Clickon on totoinitialize initializethe the actual data. actual data. XML XMLfile fileisisbeing beingimported importedinto into PE. PE.
Check Checkoption option“Import “Importactual actualdata data from NetAct region or from from NetAct region or from AXC/WBTS”. AXC/WBTS”.Select Selectthe therespective respective NMS ID (e.g. MyNMS4 if NMS ID (e.g. MyNMS4 ifthe theXML XML dump exported from NMS4) dump exported from NMS4) Click Clickon on totostart. start.
Import XML into PlanEditor – 4/5
22
2.
1.
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.1. 2.2.
Refresh Refreshthe theObject ObjectBrowser Browser Expand Expandthe the, you will see all the objects you will see all the objectsunder under RNC, e.g. COCO, FMCS, WBTS, RNC, e.g. COCO, FMCS, WBTS, WCEL, WCEL,etc. etc.
Import XML into PlanEditor – 5/5
23
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Offline Parameter Viewing
24
© NOKIA
2. 2.2.
1.1.
Click Clickon on, ,totoshow showthe the Parameter View window. Parameter View window. Select Selectthe theobject objectclass classthat that you need to view, e.g. WCEL. you need to view, e.g. WCEL. Just Justselect selectthe thedesired desiredobject object class, e.g. WCEL, then do class, e.g. WCEL, then dodrag drag &&drop to the Parameter View drop to the Parameter View window. window.
Offline Parameter Viewing
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
25
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Template for PlanEditor
26
PE4.4-4-1_empty_f or Smart_v3.3.rar
CSV Templates.rar
WBTS WBTSNam e 1M145CRMEL 1M145CRMEL 1M145CRMEL 1M149BBNTY 1M149BBNTY 1M149BBNTY
Tem plate default default default default default default
Cid Tem plate 10011 outdoor 10012 outdoor 10013 outdoor 10021 outdoor 10022 outdoor 10023 outdoor
Sector-1&2&3 LAC LcrId PriScc RAC 1011 1 37 1 1011 2 45 1 1011 3 53 1 1011 1 85 1 1011 2 93 1 1011 3 101 1
SAC Tcell URAId PSCNId UARFCN 10000 0 1011 2 10562 10001 1 1011 2 10562 10002 2 1011 2 10562 10003 0 1011 2 10562 10004 1 1011 2 10562 10005 2 1011 2 10562
LcrId
1 1 2 2
ADJSId
1 2 1 2
AdjsCid
13132 13133 13131 13133
AdjsDERR
0 0 0 0
AdjsECNoOffset
0 0 0 0
AdjsLAC 1021 1021 1021 1021
515 515 515 515
AdjsMCC
template_set
template_name
Presentation_Name.PPT / DD-MM-YYYY / Initials
313 313 313 313
RNCId
© NOKIA
WBTSId
102 102 102 102
AdjsMNC 3 3 3 3
AdjsMNC lengh 2 2 2 2
AdjsRAC 1 1 1 1
AdjsRNCId 102 102 102 102
AdjsScc 166 174 158 174
AdjsTxDiv 0 0 0 0
AdjsTxPwrRACH 21 21 21 21
NrtHopsIdentifier 2 2 2 2
RtHopsIdentifier 1 1 1 1
330 330 330 330
AdjsCPICHTxPwr
AdjsName
• Format for ADJS creation, which is separated into source & target information:
RNCId WBTSId 101 001 101 001 101 001 101 002 101 002 101 002
• On the WBTS&WCEL Creation template, first part is information for WBTS and second part is WCEL parameters. Those are not the network predefined parameter, e.g. WBTS Id, Cell Id, UARFCN, etc.
• There are also the sample template of WBTS&WCEL, ADJS, ADJG, and ADJW.
PE4.4-4-1_empty_for Smart_v3.3.mdb
• The embedded zip file contains the empty database:
Template for PlanEditor – 1/2
PLMN-PLMN/RNC-102/WBTS-313/WCEL-2 PLMN-PLMN/RNC-102/WBTS-313/WCEL-3 PLMN-PLMN/RNC-102/WBTS-313/WCEL-1 PLMN-PLMN/RNC-102/WBTS-313/WCEL-3
TargetCellDN
27
LcrId
WBTSId
RNCId
ADJGId
1 1 1
0 0 0
AdjgMNC
AdjgMCC
AdjgLAC
AdjgCI
AdjgBCCH
AdjgBCC
2 639 10488 11160 515 3 2 650 20488 11160 515 3 2 644 30488 11160 515 3
AdjgMNCLength 2 2 2
AdjgNCC 2 2 2
2 2 2
AdjgTxPwrMacTCH
30 30 30 30 30 30
RTHOPGIdentifier 1 PLMN-PLMN/BSC-46344/BCF-28/BTS-91 1 PLMN-PLMN/BSC-46344/BCF-28/BTS-92 1 PLMN-PLMN/BSC-46344/BCF-28/BTS-93
91 92 93
BcfId
28 28 28
Template
AdjwId
1 1 1
PriScc
RncId
MNC
MCC
minEcnoThreshold
LAC
txDiversityInd
AdjwCId
13131 0 1021 18 515 03 102 158 13937 PLMN-PLMN/RNC-102/WBTS-313/WCEL-1 10562 13132 0 1021 18 515 03 102 166 13938 PLMN-PLMN/RNC-102/WBTS-313/WCEL-2 10562 13133 0 1021 18 515 03 102 174 13939 PLMN-PLMN/RNC-102/WBTS-313/WCEL-3 10562
SAC
BscId
BscId
© NOKIA
45442
BtsId
BCFId
LocationAreaIdLac
Template Set
template_name
11615 10123
fddQmin 7
gprsfddQmin 7
fddQOffset 0
0
fddGprsQOffset
template_set
template_name
Presentation_Name.PPT / DD-MM-YYYY / Initials
1 13
qSearchI 7
qSearchP 7
HocId 1
7
qSearchC
• Format of 2G BTS ISHO parameter modification:
BtsId
46344 46344 46344
TargetCellDN
• Format of ADJW creation, please make sure to define MNC = “03”:
102 313 1 102 313 2 102 313 3
TargetCellDN
Template for PlanEditor – 1/2 AdjgTxPwrMacRACH
NRTHOPGIdentifier
• Format of ADJG creation:
AdjgBandIndicator
template_set
CellId
UARFCN
28
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Create & Activate Plan in PlanEditor
29
© NOKIA
1.
5.
Presentation_Name.PPT / DD-MM-YYYY / Initials
4.
3.
2.
6.
5.5. 6.6.
4.4.
3.3.
2.2.
1.1.
Always Alwaysensure ensurethat thatthe thedesired desiredplan planisis activated activatedasasthe the“Active “ActivePlan”. Plan”.
Click Clickon on to tosee seethe thecurrent current plans associated with the database. plans associated with the database. Click Clickon ontotocreate createaanew new plan (Note: new plans should be plan (Note: new plans should be created createdfor forall allplanned plannedparameter parameter changes) changes) Enter Enter“Plan “Planname”, name”,e.g. e.g.“WBTS “WBTS Creation”. Creation”. Select Selectthe the“Export “ExportProfile” Profile”=> => “Default OSS3.1 CD_0279”. “Default OSS3.1 CD_0279”. Click Click totocreate createthe thenew newplan. plan.
Create & Activate Plan – 1/2
30
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
2.
2.2.
1.1.
ItItshows showsthe theactivated activatedplan planname, name,e.g. e.g. “WBTS Creation”. “WBTS Creation”. Close Closethe thePlan Planwindow windowthen thenwe wecan can start importing the csv files. start importing the csv files.
Create & Activate Plan – 2/2
31
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Import csv into PlanEditor
32
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
4.
3.
2.
1.
5.
5.5.
4.4.
3.3.
1.1. 2.2.
Click Clickon on. . Select Selectthe therespective respectiveprofile profilename, name,e.g. e.g. “WBTS Creation” and the input csv “WBTS Creation” and the input csv file. file. Select Selectthe thetarget targetNMS NMSthat thatyou youneed need totoimport the plan. import the plan. Click Click to tostart startimporting importingthe the csv file. csv file. Click Click to tocontinue. continue.
Import csv Into PlanEditor – 1/5
33
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
3.
3.3.
2.2.
1.1.
2.
After Afterfinish finishthe theimporting, importing,click clickon on . . The TheImport ImportPreview Previewwill willshow showall allthe the parameter that we created in the parameter that we created in thecsv csv file. file. Go Gothrough throughall allthe theparameter, parameter,ifif everything everythingisiscorrect, correct,select select
Import csv Into PlanEditor – 2/5
34
1.
© NOKIA
2.
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.2.
1.1.
Go Gototothe therespective respectiveRNC RNCtotofind findthe the object that we created. New object object that we created. New object will willbe beindicated indicatedininGREEN GREENcolor. color. Click Clickon on, ,then thendrag dragand anddrop drop the WBTS into Parameter Viewer the WBTS into Parameter Viewer window windowtotosee seethe theparameter. parameter.New New parameter created will be indicated parameter created will be indicatedasas “NEW” “NEW”and andininGREEN GREENcolor coloralso. also.
Import csv Into PlanEditor – 3/5
35
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
• Other than doing ADJx creation, we also can perform mass deletion of ADJx based on format of ADjx creation template.
• The concept of import ADJx creation plan is exactly the same as WBTS creation.
• Other that WBTS creation, we also have profile for: • ADJS creation • ADJI creation • ADJG creation • ADJW creation
Import csv Into PlanEditor – 4/5
36
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
2.2.
1.1.
2.
On OnImport ImportPreview, Preview,ititwill willshow showthe theADJS ADJS parameter that we created in the plan. parameter that we created in the plan. On OnObject ObjectBrowser, Browser,we wealso alsocan cansee seeall allthe the ADJS that we created are highlighted in ADJS that we created are highlighted in GREEN GREENcolor. color.
• Here is the sample of ADJS creation on the Import Preview and Object Browser view:
Import csv Into PlanEditor – 5/5
37
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
ADJx Deletion
38
RNCId
© NOKIA
1 1 1 1
WBTSId
LcrId
2 3 1 3
ADJSId
1 1 1 2
AdjsCid
10751 10751 10752 10752
AdjsDERR 0 0 0 0
AdjsECNoOffset 0 0 0 0
AdjsLAC 888 888 888 888
515 515 515 515
AdjsMCC
template_set
template_name
Presentation_Name.PPT / DD-MM-YYYY / Initials
75 75 75 75
AdjsMNC 3 3 3 3
AdjsMNC lengh 2 2 2 2
AdjsRAC 1 1 1 1
AdjsRNCId 1 1 1 1
AdjsScc 253 253 261 261
AdjsTxDiv 0 0 0 0
AdjsTxPwrRACH 21 21 21 21
1 1 1 1
NrtHopsIdentifier
AdjsName
• Below is the format of the csv template: RtHopsIdentifier 1 1 1 1
330 330 330 330
AdjsCPICHTxPwr
• The main purpose is to do filtering on the query so we can perform the deletion.
• ADJx deletion is almost the same as ADJx creation, the tricks is to change a parameter to a specific value, e.g. change LAC=888 which doesn’t exist in the network.
ADJx Deletion – 1/8
PLMN-PLMN/RNC-1/WBTS-75/WCEL-1 PLMN-PLMN/RNC-1/WBTS-75/WCEL-1 PLMN-PLMN/RNC-1/WBTS-75/WCEL-2 PLMN-PLMN/RNC-1/WBTS-75/WCEL-2
TargetCellDN
39
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
1.1.
After Afterimporting importingthe thecsv csvfile, file,on onImport Import Preview you will see actually we Preview you will see actually weare are modifying the AdjsLac to value 888. modifying the AdjsLac to value 888.
ADJx Deletion – 2/8
40
© NOKIA
1.
Presentation_Name.PPT / DD-MM-YYYY / Initials
3.
3.3.
1.1. 2.2.
2.
After Afteraccept acceptthe theimport, import,click clickon on. . Select Selecton onthe theADJS ADJS Deletion plan that we created. Deletion plan that we created. Select Select“Yes” “Yes”totoconfirm confirmupdate updatethe theactual actual data. data.
ADJx Deletion – 3/8
41
© NOKIA
2.
Presentation_Name.PPT / DD-MM-YYYY / Initials
1. 3.
Click Clickon on. . Select Selectthe theobject objectclass, class,e.g. e.g.“ADJS”. “ADJS”. Select Select“Stored “StoredQueries Queriesand andUpdates” Updates”toto execute executethe thequery. query.
1.1. 2.2. 3.3.
ADJx Deletion – 4/8
42
© NOKIA
2.
3.
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
2.2. 3.3.
1.1.
After Afterquery queryfinish finishrunning, running,ititwill willfilter filterall all the “AdjsLac=888”. the “AdjsLac=888”.
On Onthe theQuery Querytypes types“AdjsLac “AdjsLac==888” 888”orordo do drag & drop of parameter “Location Area drag & drop of parameter “Location Area Code”. Code”. Then Thenclick clickon on. .
ADJx Deletion – 5/8
43
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.
1.
2.2.
1.1.
Select Selectthe thefirst firstrow rowofofthe thedata dataand andpress press “Shift” key on the keyboard and scroll “Shift” key on the keyboard and scrolldown down totobottom and hit “Delete” key. bottom and hit “Delete” key. Select Select“Yes” “Yes”totoconfirm confirmtotodelete deletethe thedata. data.
ADJx Deletion – 6/8
44
© NOKIA
1.
Finally Finallyyou youwill willsee see“DELETED” “DELETED”on onStatus Status column. column. On OnObject ObjectBrowser, Browser,the theADJS ADJSthat thatwe we deleted are highlighted in RED color. deleted are highlighted in RED color.
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.2.
1.1.
ADJx Deletion – 7/8 2.
45
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1. 1.1.
After Afterexporting exportingthe theplan planinto intoxml, xml,you you will be able to see operation of “delete” will be able to see operation of “delete” ininthe thexml xmlfile. file.
ADJx Deletion – 8/8
46
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
2G BTS & HOC Parameter Modification
47
© NOKIA
3.3. 4.4.
3.
1.1. 2.2.
2.
4.
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
Click Clickon on. . Key Keyininthe thePlan PlanName, Name,e.g. e.g.“2G “2GBTS BTS&& HOC HOCModification”. Modification”. Select SelectExport ExportProfile: Profile:“Default “DefaultOSS3.1 OSS3.1 CD_0279”. Then click on CD_0279”. Then click on toto continue. continue. Click Clickon on totoactivate activatethe thecreated created plan as active plan. plan as active plan.
2G BTS & HOC Parameter Modification -1/6
48
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
5.
4.
2.
1.
3.
3.
5.5.
4.4.
3.3.
1.1. 2.2.
Click Clickon on. . Select Selectthe theprofile: profile:“2G “2GBTS BTSISHO ISHO Modification”. Modification”. Select Selecttarget targetNMS NMSthat thatyou youneed needtoto import importthe theplan: plan:e.g. e.g.“4 “4––MyNMS4”. MyNMS4”. Click Clickon on totostart startimporting importing the planned data. the planned data. Click Clickon on totocontinue. continue.
2G BTS & HOC Parameter Modification - 2/6
49
2.
1.
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
3.
3.3.
2.2.
1.1.
On OnImport ImportPreview, Preview,you youwill willsee seethe the planned data. planned data. IfIfeverything everythingisiscorrect correctthen thenclick clickon on . . Click Clickon on to tocontinue. continue.
2G BTS & HOC Parameter Modification - 3/6
50
3.
© NOKIA
1.
Presentation_Name.PPT / DD-MM-YYYY / Initials
4.
2.
Go GototoObject ObjectBrowser, Browser,find findthe thetarget target BTS and do Drag & Drop to Parameter BTS and do Drag & Drop to Parameter View Viewwindow. window. ItItshows showsthat thatwe weare aremodifying modifyingthe the parameters: qSerchP, qSearchI, fddQmin parameters: qSerchP, qSearchI, fddQmin and andgprsfddQmin. gprsfddQmin.
3.3. 4.4.
Click Clickon on. . Select Selectthe theobject objectclass, class,e.g. e.g.“BTS”. “BTS”.
1.1. 2.2.
2G BTS & HOC Parameter Modification - 4/6
51
© NOKIA
3.
4.
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.
1.
6.
5.
5.5. 6.6.
4.4.
2.2. 3.3.
1.
Click Click to toexport exportto toxml xmlfile. file.
Click Clickand andthen then . . ItItshows showsthe theparameters parametersthat thatwe weneed needtoto modify. modify. Select Selectthe theOutput OutputFile Filename. name.
Click on to load the Export Data Datawindow. window. Click Clickon on totocontinue. continue.
2G BTS & HOC Parameter Modification - 5/6 1. Click on to load the Export
52
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
1.1.
After Afterexporting exportingthe theplan planinto intoxml, xml,you you will be able to see operation of “update” will be able to see operation of “update” ininthe thexml xmlfile. file.
2G BTS & HOC Parameter Modification - 6/6
53
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Run Query Checking
54
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
• The query checking is also important for regularly parameter consistency check, which can be performed once a week.
• Example of query: • Checking duplicate ADJS • Checking missing source or target WCEL object • Checking the consistency of PriScrCode • Checking duplicate of BCCH & BSIC • Checking the AdjgTxPwrMaxRACH consistency for 1800 band • Only outgoing ADJS • Etc.
• After finish importing the xml plan we need to run the all query checking, in order to minimize the errors on the xml that we create.
• There are pre-defined SQL queries in PlanEditor to perform all kinds of consistency checking on different object classes, e.g. WBTS, WCEL, ADJS, ADJG, ADJW, etc.
Run Query Checking – 1/2
55
Presentation_Name.PPT / DD-MM-YYYY / Initials
4.
3.
Run Query Checking – 2/2
Click Clickon on totoopen openthe thequery querywindow. window. Select Selectthe therespective respectiveobject objectclass, class,e.g. e.g.WCEL, WCEL, ADJS, ADJG, ADJW, etc. ADJS, ADJG, ADJW, etc. Go Gototoand anditit will willshows showsall allthe thestored storedqueries. queries. Select Selectthe thequery queryyou youneed needthen thenclick clickon on . If errors detected, verify it and . If errors detected, verify it andfix fix the error. If you are doing consistency check, the error. If you are doing consistency check, then thenyou youneed needtotoissue issuechange changerequest. request.
© NOKIA
4.4.
3.3.
1.1. 2.2.
2.
1.
56
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Export Plan
57
© NOKIA
2.
Presentation_Name.PPT / DD-MM-YYYY / Initials
3.
1.
3.3.
1.1. 2.2.
Click Clickon on totoexport exportthe thedata. data. Select Selectthe the totoshows showsthe thePlans Plans window. window. Click Clickand andthen then . .
Export Plan – 1/3
58
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
3.
2.
3.3.
1.1. 2.2.
Export ExportPreview Previewshows showsthe theplanned planneddata. data. Select Selectthe theoutput outputfile filename, name,e.g. e.g. WBTS_Creation_RNC101_OSS4_09Mar.xml. WBTS_Creation_RNC101_OSS4_09Mar.xml. Click Click totoexport exportthe theplan plantotoxml xml file. file.
Export XML Plan – 2/3
59
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Note: xxx = RNC or BSC ID ; y = OSS ID; date = ddmm
• Please make sure all the xml created have the standard naming. • WBTS & WCEL creation: • WBTS&WCEL_Creation_RNCxxx_OSSy_date.xml • ADJS/ADJG/ADJW creation • ADJS_Creation_RNCxxx_OSSy_date.xml • ADJG_Creation_RNCxxx_OSSy_date.xml • ADJW_Creation_BSCxxx_OSSy_date.xml • ADJS/ADJG/ADJW deletion • ADJS_Deletion_RNCxxx_OSSy_date.xml • ADJG_Deletion_RNCxxx_OSSy_date.xml • ADJW_Deletion_BSCxxx_OSSy_date.xml • 2G BTS & HOC Modification • 2G_BTS&HOC_Modification_BSCxxx_OSSy_data.xml • This is to make sure NOC, RNC or OSS engineers have common understanding of the objective of the XML and where to upload the XML.
Export XML Plan – 3/3
60
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Verifying XML Plan
61
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.2.
1.1.
Exported ExportedRAML RAML2.0 2.0XML XMLoutput outputindicating indicating e.g. e.g. create WBTS-65533. create WBTS-65533. The Theplan planisisnow nowready readytotobe beimplemented implementedinto into the RNC. the RNC.
Verifying XML Plan
62
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Setup Citrix Connection
63
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1. 1.1.
Double Doubleclick clickon on.
Setup Citrix Connection – 1/11
64
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
3.3.
1.1. 2.2.
2.
3.
Click Click. . Key Keyininthe thename nameofofthe theApplication ApplicationSet, Set,e.g. e.g. “OSS4”. “OSS4”. Click Clicktotoinput inputthe theIPIP address. address.
Setup Citrix Connection – 2/11
65
© NOKIA
3.
1.
Presentation_Name.PPT / DD-MM-YYYY / Initials
2. 5.5.
4.
5.
Key Keyininthe theIPIPofofthe theWAS WASServer, Server,e.g. e.g. 10.120.224.236. 10.120.224.236. Select Selectthe thecorrect correctApplication ApplicationSet, Set,e.g. e.g. “Smart_OSS4”. “Smart_OSS4”. Click Clickon on totocontinue. continue.
3.3. 4.4.
Select Select. . Click Clickon on. .
1.1. 2.2.
Setup Citrix Connection – 3/11
66
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
1.1. 2.2.
1.
Click Click, ,you youcan canignore ignorethe thesetting. setting. Click Click. .
Setup Citrix Connection – 4/11
67
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1. 1.1.
ItItshows showsApplication ApplicationSet Set“OSS4” “OSS4”has hasbeen been added. added.
Setup Citrix Connection – 5/11
68
© NOKIA
4.4.
2.2. 3.3.
1.1.
Presentation_Name.PPT / DD-MM-YYYY / Initials
Select Select. . Click Clickon on.
Other Otherthan thancreate createApplication ApplicationSet, Set,we wealso also can create ICA Connection. Double click can create ICA Connection. Double clickon on , then click . , then click . Key Keyininthe theICA ICAConnection Connectionname. name.
1.
3.
2.
4.
Setup Citrix Connection – 6/11
69
© NOKIA
2.
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
Select Selectthe theServer, Server,e.g. e.g.“NMS1WAS2”, “NMS1WAS2”,then then click on to continue. click on to continue.
3.3.
3.
Click Clickon on. . Key Keyininthe theIPIPofofthe theWAS WASserver. server.
1.1. 2.2.
Setup Citrix Connection – 7/11
70
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
1.1. 2.2.
2.
Click Clickon on, ,you youcan canignore ignorethe thesetting. setting. Click Clickon on totocontinue. continue.
Setup Citrix Connection – 8/11
71
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
1.1. 2.2.
Click Clickon on. . Click Clickon on. .
2.
Setup Citrix Connection – 9/11
72
© NOKIA
1.
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.1.
ItItshows showsICA ICAConnection Connectionthat thatwe wecreated, created, e.g. “Smart_OSS1”. e.g. “Smart_OSS1”.
Setup Citrix Connection – 10/11
73
© NOKIA
1.
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.
1. 2.2.
1.1.
Double Doubleclick clickon onany anyCM CMapplication applicationthat thatyou you need to run, e.g. CM Plan Manger. need to run, e.g. CM Plan Manger. Key Keyininthe theuser username nameand andpassword. password.After After that you can start working on the CM that you can start working on the CM applications. applications.
Setup Citrix Connection – 11/11
74
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Import Plan into CM Plan Manager
75
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
1.1. 2.2.
Click Clickon on, ,then thenselect select. Alternative Alternativeisistotoclick clickon on“Current “CurrentView” View”and and select . select .
2.
Import Plan into CM Plan Manager – 1/3
76
3.3.
2.2.
1.1.
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Click Clickon on totoselect selectthe thexml xmlfile fileyou you need to import. need to import. Make Makesure sureyou youselect select“V:\” “V:\”drive, drive,which whichwill will point to your local drive “C:\”. point to your local drive “C:\”. Select Selectthe thexml xmlfile filethat thatyou youneed needtotoimport. import.
2.
1.
3.
Import Plan into CM Plan Manager – 2/3
77
© NOKIA
3.
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.
1.
2.2. 3.3.
1.1.
Upon Uponimporting importingfinish finishyou youcan canclick clickon on to see the results. You also can click on on oror ififthere thereisisany any problem on importing. problem on importing.
Type Typethe thename nameofofyour yourplan, plan,ititisissuggested suggested totouse the same name as the xml file. use the same name as the xml file. Click Clickon on totostart startthe theimport. import.
Import Plan into CM Plan Manager – 3/3
78
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Approve and Prepare Plan in CM Plan Manager
79
© NOKIA
1.
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.
2.2.
1.1.
Click Clickon on then thenselect select“Approve “Approve Plan”. Plan”. After Afterplan planisisapproved, approved,you youwill willsee seethe the status of “Approved”. status of “Approved”.
Approve & Prepare Plan – 1/2
80
© NOKIA
1.
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.
2.2.
1.1.
Click Clickon on then thenselect select“Prepared “Prepared Plan”. Plan”. After Afterplan planisisprepared, prepared,you youwill willsee seethe the status of “Completed” on Plan Preparation. status of “Completed” on Plan Preparation.
Approve & Prepare Plan – 2/2
81
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Activation in CM Provisioner
82
1.
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
4.
3.
2.
5.5.
3.3. 4.4.
2.2.
1.1.
5.
Click Clickon ontotostart startthe the activation. activation. You Youcan cancheck checkthe theprogress progresswhen whenyou youclick click on . on .
Go Gototo“Provisioning” “Provisioning”and andselect selectthe theplan planthat that you need to activate. you need to activate. Under UnderDN, DN,select selectthe theobject objectthat thatyou youneed needtoto do dothe theactivation. activation. Select Select operation. operation.
Activation in CM Provisioner – 1/2
83
1.
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.1.
Subplan SubplanLog Logshows showsthat thatthe theactivation activation completed successfully. completed successfully.
Activation in CM Provisioner – 2/2
84
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Merge Non-Network Data CM Plan Manager
85
© NOKIA
1.
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.2.
1.1.
2.
Run Runfor forall allthe the ADJx plan after activation completed. ADJx plan after activation completed. ItItwill willshows showsstatus statusofofMerge MergeNon-Network Non-Network Data, e.g. Completed or Partially Data, e.g. Completed or PartiallyFailed. Failed.This This isistotomake sure TargetCellDN is updated into make sure TargetCellDN is updated into OSS DB. OSS DB.
Merge Non-Network Data
86
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Actual Configuration Viewing in CM Editor
87
© NOKIA
1.
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.
2.2.
1.1.
Under UnderActual ActualConfiguration, Configuration,expand expandPLMNPLMNPLMN and select the BSC or BTS that PLMN and select the BSC or BTS thatyou you need to view the information. need to view the information. All Allthe theparameters parametersare areshowed showedininthis thisarea. area.
Actual Configuration Viewing
88
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Mass Modification in CM Editor
89
© NOKIA
1.
Presentation_Name.PPT / DD-MM-YYYY / Initials
3.
2.
3.3.
2.2.
1.1.
Do Domultiple multipleselection selectionon onthe theBTS BTSthat thatyou you want to modify the parameter, e.g. modify want to modify the parameter, e.g. modify MCC=515 MCC=515and andMNC=03. MNC=03. ItItshows shows33BTSs BTSswith withwrong wrongdefinition definitionofof MCC MCC&&MNC. MNC. Right Rightclick clickon onthe theBTS BTSobject objectthen thenselect select “New Plan From Selected Actual MOs”. “New Plan From Selected Actual MOs”.
Mass Modification – 1/6
90
2.
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
2.2.
1.1.
ItItshows showsthe thenew newPlanned PlannedValue ValueofofMCC MCCand and MNC. MNC. Click Clickon on
Mass Modification – 2/6
91
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
1.1.
Modify Modifythe thePlanned PlannedName, Name,e.g. e.g.MCC&MNC MCC&MNC Modification Modification
Mass Modification – 3/6
92
1.
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.2.
1.1.
2.
Click Clickon on under under“MO “MOClasses Classesinin Plan”. Plan”. ItItshows showsthe theplanned plannedvalue valueofofMCC=515 MCC=515
Mass Modification – 4/6
93
1.
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
3.
2.
2.2. 3.3.
1.1.
Click Clicktotoexecute executethe the activation. activation.
Go GototoCM CMProvisioner, Provisioner,select selectthe thePlanned Planned Name, e.g. “MCC&MNC Modification” Name, e.g. “MCC&MNC Modification”. . Select Select. .
Mass Modification – 5/6
94
© NOKIA
Activation Activationcompleted completedsuccessfully. successfully.
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
1.1.
Mass Modification – 6/6
95
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Consistency Check in CM Analyser
96
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
1.1.
Under Under“Check”, “Check”,select select.
Consistency Check – 1/9
97
3.
2.
1.
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
3.3.
2.2.
1.1.
Expand Expand“Nokia.OSS3_1ed3_3g”, “Nokia.OSS3_1ed3_3g”,and andselect select the rules that you need. the rules that you need. Drag Dragthe therules rulestotohere, here,you youcan canrun runmultiple multiple rules at the same times. rules at the same times. ItItshows showsthe thedetailed detaileddescription descriptionofofthe therule. rule.
Consistency Check – 2/9
98
4.
© NOKIA
1.
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.
3.
3.3. 4.4.
2.2.
1.1.
Paste Pastethe theRNC RNCobject objectback backtoto“Actual “Actual Configuration Check Scope” field. Configuration Check Scope” field.
Under Under“Check “CheckTarget”, Target”,select select. Open OpenTopology TopologyBrowser, Browser,and andselect selectthe theRNC RNC object that you need to run the checking. object that you need to run the checking. Click Clickon on and andselect select. .
Consistency Check – 3/9
99
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.
1.
2.2.
1.1.
Under Under“Post-Check “Post-CheckActions”, Actions”,key keyininthe thePlan Plan Name, e.g. “ADJG_Check_10Mar”. Name, e.g. “ADJG_Check_10Mar”. Now Nowyou youcan canstart startthe thecheck. check.
Consistency Check – 4/9
2.
1.
100
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.2.
1.1.
After Afterthe thechecking checkingcompleted, completed,select selectthe the Plan that we created before. Plan that we created before. ItItshows showsthe theRule Rulethat thatwe weselected, selected,e.g. e.g. “AdjgCellExists” & “AdjgBiDirectional”. “AdjgCellExists” & “AdjgBiDirectional”.
Consistency Check – 5/9
101
© NOKIA
1.
2.
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
Click Clickon on. Select Selectone oneofofthe thetarget. target. ItItshows showsdetailed detailedinformation informationofofthe theerrors. errors.
1.1. 2.2. 3.3.
Consistency Check – 6/9
102
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
1.
1.1.
Under Under“File”, “File”,go gototo“Export “ExporttotoFile”, File”,click clickon on to export the results. to export the results.
Consistency Check – 7/9
103
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
2.
1.
3.
2.2. 3.3.
1.1.
Select Select“V:\” “V:\”drive driveand andkey keyininthe thefile filename, name, e.g. “ADJG_Check_10mar.csv”. e.g. “ADJG_Check_10mar.csv”.
Select Selecttotoexport exportinineither either“HTML” “HTML”oror“CSV” “CSV” format. format. Click Clickon on. .
Consistency Check – 8/9
104
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Open Openthe thecsv csvfile fileinto intoMS MSExcel Exceltoto prepare preparefor forthe theChange ChangeRequest. Request.
Consistency Check – 9/9
105
© NOKIA
Presentation_Name.PPT / DD-MM-YYYY / Initials
Thank YOU!!!
View more...
Comments
