NDT Price Guide Issue 16

February 8, 2017 | Author: vfq3481 | Category: N/A
Share Embed Donate


Short Description

Price guide from NDT Equipment Supplies Catalogue....

Description

Page i

WELCOME TO ISSUE 16 OF THE NDT EQUIPMENT SUPPLIES PRODUCT AND PRICE GUIDE To install this catalogue on to your computer go back to the un-opened file where you will see the Adobe icon, use copy and paste or drag and drop on to your desktop or selected file. If you have down loaded this from the web site you can save a copy by clicking on the tab showing a diskette or file then save or save as, we suggest that you save on your desktop for easy access. You may click anywhere within this red box to go straight into the contents page. Hover your curser over the item you require and click your left mouse button and you will go straight to the page for the item selected. To return to the contents page simply left click on the blue text at the page bottom. Depending how your system is set up, by using left / right button or wheel on your mouse you can increment page by page . Contact us Our Company Environmental Policy Delivery Terms & Conditions Page i

ENVIRONMENTAL POLICY STATEMENT It is our policy to ensure activities are managed efficiently to minimise any impact on the environment, as is reasonably practicable. We will ensure that we comply with existing and future environmental legislation. The company will manage its product range to ensure that all products in the range do not cause unacceptable environmental damage through its receipt, storage and disposal methods. Wherever possible the company will seek to minimize waste through:  Reduction of unnecessary consumption  Purchasing and using recycled products and packaging for our own use  Recycling used printing cartridges  Re-using of packaging received.

Employees are actively encouraged to keep all waste to a minimum and recycle where practically possible.

NDT Equipment Supplies Ltd at Wellingborough holds Certificate No: LRQ 4005204 And operates a Quality Management System which Complies with the requirements of ISO 9001:2008 For the following scope: The Manufacture of Test Blocks used for the validation of non-destructive testing instruments. The sale of proprietary non-destructive test equipment and consumables.

www.ndtes.co.uk

Page ii

[email protected]

NDT Equipment Supplies Limited is a company specialising in providing a broad spectrum of inspection and test equipment for inspection companies, process plant, manufacturing and service industries for a worldwide market. The company operates in conjunction with a worldwide network of representatives and supplies equipment and services to a worldwide customer base in over 50 countries. We are pleased to provide this copy of our Product and Price guide, which contains details of our extensive range of products, equipment and servicing. In general the prices of items are included. For the more complex equipment with different options of supply, please contact our office below where a specific price can be quoted for your requirements. The company’s personnel have many years’ experience and depth of knowledge in most areas of NDT and Inspection. We are pleased to offer advice on equipment requirements and problem solving. We offer to our customers: Excellent Technical Support and Advice A Comprehensive Product Range Personal Attention to Individual Customer Needs Should you not see the product you require or need further information on any of the products listed in this catalogue, please do not hesitate to contact our sales office direct. Prices shown in this catalogue are for guidance only and were correct at time of printing. For latest pricing please see our web site www.ndtes.co.uk All prices are in GB (£) Pounds Sterling and are ex-Works, unless otherwise stated. We currently do not accept credit cards . NDT Equipment Supplies Limited 11 Vaux Road, Finedon Road Industrial Estate, Wellingborough, Northants. NN8 4TG Telephone: Int + 44 (0) 1933 274833 Fax: Int + 44 (0) 1933 274113 Email: [email protected] Please note telephone calls may be recorded

www.ndtes.co.uk SALES – HIRE – SERVICE – CALIBRATION – CALIBRATION BLOCKS Page iii

Delivery Terms & Conditions In these conditions of Sale “The Seller” is NDT Equipment Supplies Ltd Carriage & Insurance Inspection equipment can be fragile; therefore, on an occasional damage during transit is possible. All items sold are EX - WORKS un-insured in GB Pounds, other currencies on request. We do not insure goods whilst in transit unless specifically requested to do so by you the customer. Goods that are ordered and dispatched without insurance immediately become the customer’s responsibility; “the seller” is not in any way liable for uninsured goods. Please ask for an insurance quote when you place your order. Claims: a)

Any consignment not delivered within 14 days of the date on “the seller’s” invoice must notify “the seller” in writing.

b)

We recommend that when you sign the carrier’s delivery note you mark the items as, “NOT INSPECTED”.

c)

We advise that you inspect your goods immediately after delivery to ensure that all parts are present and correct. Any damage or missing parts must be advised to both “the seller” and carrier in writing within 3 days of receipt, please ensure that the goods, all outer casings and other wrappings are available for inspection by “the seller” or their representative, you will also need to be in possession of your delivery note marked “NOT INSPECTED”.

d)

“The seller” will not accept returned goods unless a prior written agreement has been made between “the seller” and the customer. Any goods being returned despite being correctly supplied to the customer’s specification will be subject to a 20% re-stocking charge.

www.ndtes.co.uk

Page iv

[email protected]

PLEASE NOTE Not all the products sold by NDT Equipment Supplies are listed. If you do not see what you are looking for, please call our offices, our sales staff will be pleased to assist you. Please note, some items are territory restricted.

Calibration Blocks on Pages 42 to 45 can also be manufactured to other Standards i.e. American, French, Japanese etc. Special test blocks are available to individual customer specifications and requirements please call to discuss your particular requirement .

FAST TRACK ORDERING: For Fast Track Ordering on Calibration Blocks and Engineering Please Call, Fax or Email Direct to:

Tel: INT + 44 (0) 1933 274833 Fax: INT + 44 (0) 01933 274113 Email: [email protected]

Payment Where no credit facility has been set up with your company, pre-payment is required. Wire transfer payments, we reserve the right to add the bank process fee.

NDT Equipment Supplies Limited 11 Vaux Road, Finedon Road Industrial Estate, Wellingborough, Northants. NN8 4TG Telephone: Int + 44 (0) 1933 274833 Fax: Int + 44 (0) 1933 274113 Email: [email protected] Telephone calls may be recorded

Vat Registration No GB 132 9926 96 : Company Registration No 7143743 : Registered in England Registered office address: Oakley House, Headway Business Park, 3 Saxon Way West, Corby, Northants NN18 9EZ UK

Page v

CONTENTS ACFM Crack Depth Gauge Adhesive Tape Adhesion Testing Agfa Chemicals Agfa Films Agitator, Chemical Mixing Analogue Survey Meter Audit ST-1 MPI Shot Timer Barrier Tape Bath Sprayers Beacons, Radiation Warning Berthold Penetrameter Bleeper, Radiation Warning Black light (Ultraviolet) Blocks, Ultrasonic Test Bridge Type Magnets Bulbs. Spare, For Viewers Cables and Connectors Cassette, Flexible & Rigid Calculator. Gamma Calibration Blocks Calibration Block USA Spec Calibration – Equipment Ceiling Safelight Centrifuge Tube & Stand Channel Hangers Chemicals, Film Processing Chemicals, Magnetic Particle Chemicals, Penetrant Chinagraph Pencil Clamping Magnets Cleaner. Penetrant Climatic Condition Monitors Clip, Film Drying Paint Test Equipment Coat & Wrap Inspection Contact Clamps MPI Coating Thickness Gauges Collimators Contrast Paint, MPI Countdown Timer Couplant, Ultrasonic Crack Depth Gauges Crawler, Pipeline Crayon, Specimen Marking Crayon, High Temperature Cygnus Thickness Gauges Darkroom Apparatus Darkroom Safelight & Filters Darkroom Timer De-magnetisers Densitometers Density Step wedge Density Strip Developer, Penetrant Testing Developer X-ray

www.ndtes.co.uk

75 8 74 19 18 22 7 79 8 32 7 38 7 29-37 42-45 8 22 60 11-12 8 42-45 45 89-90 22 37 20 19 26,39 33-41 8 8 33-41 71 20 68 69 31 67 5 27-38 22 61 75 88 8 8 47 22-24 22 22 call 23 23 23 33-41 19

Developing Tanks and Lids Dew meter Dual UV / White light lamp Dial Thickness Gauge Digital Radiography Digital Thermometer Dosimeter Double Envelope Cassettes DPI Dry Powder Blowers Dryer, X-ray Film Drying Clips Dye Penetrant Testing Eddy Current Blocks Eddy Current Equipment Elastic Straps Electronic Thermometer Electronic Hardness Tester Endoscopes Equipment Calibration Equipment-Guided Wave Exposure Calculators Equotip, Hardness Tester Field Strength Indicator Film Clamping Magnets Film Markers Film Drying Clips Film Dryers Film Quality Control Film AGFA / KODAK Film Chemicals Film Folders Film Processing Spirals Film Processor Manual Film Processing Tanks /lids Film Storage Box Fluorescent Penetrants Flux Indicators Magnaflux Film Viewers Film Squeegee / Wiper Flashing Lamps Fluorescent Magnetic Inks Fluorescent Penetrants Flux Indicators Gauges - Pit Gauges - Profile Gauges - Roughness Gauges - Welding Gamma Accessories Gamma Calculator Gamma Collimators Gamma Portable Projectors Gamma Windout Units Gamma Exposure Calculator Gloss Meter Guide Tubes

Page vi

21 68 80 68 4 22 7 11-12 33,41 38 22 20 33,41 45 65 8 22 48 87 90,91 84 8 46 35 8 8,22 20 22 18 18 19 11,12 20 21 21 22 33-41 32 24 22 7 32-38 33-41 38 66 70 70 66 5 8 5 5 5 8 68 5

Guided Wave Equipment Handling Tongs Handscan Floor Scanner Hanger Bars & Clips Hardness Tester Hire Contract Hire Equipment Holiday Detectors Identification Markers Image Quality Indicator Immersion Heater Infrared Camera Ink Marker Pen Inspection Mirrors Intensifying Screens Isotopes Kodak Chemicals Kodak Films Lamp UV Lamp. Safelight Lamps Warning Lead Arrows Lead Intensifying Screen Lead Letters and Numbers Lead Marker Box Lead Marker Tapes Lead Screen Roll Lead Vinyl Sheet Lead Aprons Lens Magnifying Light Operated Film Marker Light Meter – White Light Meter – White / UV Magnet Test Weight Magnetic Accessories Magnetic Flux Indicator Magnetic Marker Tapes Magnetic Particle Inspection Magnetometer/Field indicator Metal analysis Magnets, Cassette Clamping Magnets, Crack Detection Magnifiers Magnifier, Headband Magnifier with Graticules Manual Processing Unit Marker, Film. Light Operated Marker Paint Marker Storage Box Marker Tapes Marking Crayons Marking Pen Masking Tape Measuring Eye Piece Meter – Light / UV Mirrors, Inspection

84-86 8 88,89 20 47-48 92 93 69 13 15-17 22 75 8 25 13 6 19 18 29,35 22 7 13 13 13 13 14 13 8 8 25 22 24 24 36 35-37 35-37 14 26-38 38 73 8 28 25 25 25 21 22 8 13 14 8 8 8 25 24 25

[email protected]

CONTENTS Mixing Paddle Mobile / Portable Power Monitor, Radiation MeasMPI MPI Powders & ConcenMPI Test Pieces Multiplexers Ultrasonic Nuclear Other Safety & Detection Paddle – Mixing Paint Inspection Gauge Paint Marker Paint Test Kit Pen Marker Pennant – Warning Sign Penetrameters, Plate Penetrameters (IQI) Penetrant Systems Permanent Magnets Personal Radiation Alarm Photometer Pin Hole Testing Pipecheck 2 Water Pipe Pipeline Training Pipe/Wall Crawlers Pipe Pit Gauge Pipe Centering Device Plastic Cassette Plate Tester / UT Scanner PMI Niton Pocket Dosimeter Surface Testing Portable X-ray Equipment Powder Dispenser Power Packs MPI Pressident Marking SysProbe, Ultrasonic Probe Cables Processing Unit, Auto/Ma Processing Tanks Projector, Gamma Ray Pipe Check Level / fill PVC Tape Radiation Enunciators Radiation Alarm Radiation Barriers, Rope Radiation Protection Radiation Safety Equip Radiation Survey Meter Radiation Warning Lamp Radiation Warning Signs

www.ndtes.co.uk

22 32 7 26 27 37 63 77 98 22 68 8 68 8 9,10 17 15 33 36 7 24 69 81 76 88 61 83 11 62 73 7 70 1-4 37 28 8 49 60 21 21 5 81 8 7 7 8 7-10 7-10 7 7 9,10

Radiographic Step Rail Testing Trolley Refurbished Equipment Remote Control Units Reshoe Probes kits Roll Lead Screen Shot timer for MPI Safe lamp, Darkroom Safety Detection Scorpion MFL Crawler Screens, Lead Screens, Intensifying Sequencer Ultrasonic Signs Radiation Warning Silver Recovery Siren – Hand Held Source Centering device Sources Radioactive Specimen Marking Spectacles UVA Spirals, Film Processing Squeegee Stainless Steel Spirals Stepwedge Radigraphic Step wedge Ultrasonic Stop bath Stopwatch Surface Profile Surface Cleanliness Survey Meter Syphon, Process Tank Tank Floor Scanners Tank Processing Tank Thermometer Tank Wall Scanners Tape, Lead Marker Tape, Masking Tape, Adhesive Tape, PVC Tape, Barrier Tape, Glo tape Tape, Velcro Tempil Paint Marker Test Blocks, Ultrasonic Tariff Numbers Codes Test Pieces, MPI Test Pieces with Defects Thermal ImagingCamera Thermometer, Digital Thickness Meter, UltraThickness Meter, Coat-

Page vii

18 62 Call 5 60 13 79 22 98 88 13 13 63 10 78 7 83 6 8 37 20 22 20 23 42 21 22 70 71 7 22 89 21 22 88 14 8 8 8 8 8 25 8 42/45 97 38 64 74 22 47 67

Thiotest Kit Timer, Darkroom Timer, Countdown Tongs, Isotope Handling Torch, Fibre optic Training Transducer, Ultrasonic Tube Inspection - IRIS Ultrasonic Accessories Ultrasonic Couplant Ultrasonic Flaw DetecUltrasonic Multiplexer Ultrasonic Plate Tester Ultrasonic Probe Cables Ultrasonic Probe reshoe Ultrasonic Sequencer Ultrasonic Test Blocks Ultrasonic Thickness Ultrasonic Velocity Ultrasonic Wall Chart Ultraviolet Lamp Ultraviolet Light Meter UV Dual White Light UVA (Black) Light Meter Vacuum Box Velcro Tapes Viewers, X-ray Film Warning Enunciator Warning Lamp Warning Sign Watch, Stop Welding Gauge Wet Film Thickness Wet Horizontal MPI Wheel, Bar Test Piece White Light Meter Wind Out Units Wiper, Film Wire Type IQI X-ray Alarm X-ray Equipment PortX-ray Films X-ray Exposure Chart X-ray Film Holder X-ray Film Processor X-ray Processing X-ray Quality Control X-ray Units Directional X-ray Units Panoramic Yokes, Electro Magnetic Zyglo Penetrant

18 22 22 8 25 88 49,60 82 60 61 46 63 62 60 60 63 42-45 47,48 95 Cen29,35 24 80 24 Call 25 24 7 7 9-10 22 66 67 28,30 38 24 5 22 15,17 7 1-4 18 96 11,12 21 20 18 1,4 2,3 28 26

[email protected]

11 Vaux Road, Finedon Road Industrial Estate, Wellingborough Northants NN8 4TG. U.K Tel: Int + 44 (0) 1933 274833 Fax: Int + 44 (0) 1933 274113 www.ndtes.co.uk

Contact us : General Enquires Terry Bowkett Sales Manager

Jeanette Fleming Office Manager Web problems Cheryl Holman Accounts

Ken Brimfield Managing Director

Page viii

PORTABLE X-RAY EQUIPMENT Portable X-Ray Equipment SITE - X NDT Equipment Supplies Ltd offer a complete range of portable x-ray equipment from ICM. Both Directional and Panoramic. ICM offer some of the worlds’ most advanced portable half wave x-ray units with a large range of kV outputs to choose from. These range from 160kV, to an all-new 360kV. These are exclusively available through NDT Equipment Supplies and their agents (Country Dependent). NDT Equipment Supplies also offer their best selling range of crawler tube and control panels, compatible to bolt straight on to your existing crawler (subject to confirmation, some minor adjustments may be required)

New light-weight generators SITE X - PORTABLE X RAY SETS - DIRECTIONAL NORMALLY OPERATING WITH STANDARD CONTROL UNIT SCU 286 X RAY GENERATORSD 1603 160kV, 1-3mA, FOCAL SPOT 0.8mm X 0.8mm DIRECTIONAL ANGLE BEAM 60° X 40° D 2008 200kV, 1-8mA, FOCAL SPOT 0.8mm X 0.8mm DIRECTIONAL ANGLE BEAM 60° X 40° D 2258 225kV, 1-8mA FOCAL SPOT 2.5mm X 2.5mm DIRECTIONAL ANGLE BEAM 60° X 40° D 2504 250Kv, 1-4mA FOCAL SPOT 2.5mm X 2.5mm DIRECTIONAL ANGLE BEAM 60° X 40° D 2508 250kV, 1-8mA FOCAL SPOT 2.5mm X 2.5mm DIRECTIONAL ANGLE BEAM 60° X 40° D 3006 300kV, 1-6mA FOCAL SPOT 2.5mm X 2.5mm DIRECTIONAL ANGLE BEAM 60° X 40° D 3206 320kV, 1-6mA FOCAL SPOT 2.5mm X 2.5mm DIRECTIONAL ANGLE BEAM 60° X 40° ALL UNITS FEATURE 100% DUTY CYCLE AT 40°C AMBIENT TEMPERATURE A MICROCONTROLLER BOARD WITH TRUE kV AND mA MEASUREMENTS WORKING AMBIENT TEMPERATURE: 25°C to 70°C A 700mm FFD TELESCOPIC CENTERING DEVICE TWO (2) GUARD- RINGS (TOTAL 3.6kgs ) A BUILT IN CAROUSEL WITH ONE DIAPHRAGM 10 X 48cms ( 2 OPTIONAL )+ LEAD CAP (NOT D1603 & D2008) -

-

WEIGHTS D1603 8kgs D2008, D2258, D2508, 27kgs D3006 29kgs D3206 34kgs PAIR OF GUARD - RINGS 3.6kgs EXTRA DIMENSIONS ( WITH GUARD RINGS ) D1603 120mm DIA. X 530mm HIGH D2008, D2258, D2508 346mm DIA. X 771mm HIGH D3006, D3206 346mm DIA. X 831mm HIGH

www.ndtes.co.uk

Page 1 Back to contents page

160

[email protected]

X-RAY EQUIPMENT SITE – X - PORTABLE X RAY SETS - PANORAMIC NORMALLY OPERATING WITH STANDARD CONTROL UNIT SCU 286 X RAY GENERATORS C2007 200kV, C2257 225kV, C2505 250Kv C2505 250kV, C3005 300kV, C3205 320kV,

1-7mA, 1-7mA, 1-5mA 1-5mA, 1-5mA, 1-5mA,

FOCAL SPOT 5mm DIA. X 0.9mm FOCAL SPOT 5mm DIA. X 0.9mm FOCAL SPOT 5mm DIA. X 0.8mm FOCAL SPOT 5mm DIA. X 0.9mm FOCAL SPOT 5mm DIA. X 0.9mm FOCAL SPOT 5mm DIA. X 0.9mm

ANGLE BEAM 360° x (2 x 20°) ANGLE BEAM 360° x (2 x 20°) ANGLE BEAM 360° x (2 x 20°) ANGLE BEAM 360° x (2 x 20°) ANGLE BEAM 360° x (2 x 20°) ANGLE BEAM 360° x (2 x 20°)

ALL UNITS FEATURE: -

100% DUTY CYCLE AT 40°C AMBIENT TEMPERATURE A MICROCONTROLLER BOARD WITH TRUE kV AND mA MEASUREMENTS A EMR ( BEAM HOMOGENEITY ) MICROCONTROLLED REAL TIME SYSTEM WORKING AMBIENT TEMPERATURE: - 25°C to 70°C FULLY LEAD SHIELDED TRUE IP65 WEATHERPROOF 3 X 700mm FFD TELESCOPIC CENTERING DEVICES TWO(2) GUARD-RINGS ( TOTAL 3.6kgs )

-

C2007, C2257, C2505 C3005, C3205 PAIR OF GUARD RINGS C2007, C2257, C2505 C3005, C3205

WEIGHTS:

DIMENSIONS (WITH GUARD RINGS)

-

26kgs 34kgs 3.6kgs EXTRA 346mm DIA. X 771mm HIGH 346mm DIA. X 831mm HIGH

STANDARD CONTROL UNIT TYPE SCU 286 WITH KEY FEATURES: INPUT LINE FROM 198 TO 264 VAC - 45 TO 66 Hz SELECTOR FREE 1kV STEP TUBE VOLTAGE KEYBOARD SELECTION 0.1mA STEP CURRENT TUBE KEYBOARD SELECTION ( MIN. 1mA ) LINE REGULATION BETTER THAN 0.5% KEYBOARD SELECTION OF EXPOSURE FROM 1sec. TO 99MIN. 59sec. 16 KEYS POLYESTER TACTILE MEMBRANE KEYBOARD SYSTEM 2 X 20 DIGITS HIGH BRIGHTNESS VACUUM FLOURESCENT DISPLAY SELECTED AUTOMATED WARM-UP PROCEDURE WITH DATA RECORDING DATABASE FACILITIES WITH THOUSANDS OF POSSIBLE RECORDS TIME, kV, mA, VOLTAGE AND FREQUENCY LINE DIGITAL METERS FULLY COMPATIBLE WITH ALL SITE - X TUBEHEADS WORKING AMBIENT TEMPERATURE: - 25°C TO 55°C - TRUE IP65 OVERALL SIZES 157 (H) X 335 (W) X 520 (D)mm – 13kgs SUPPLIED WITH: A 6.0 kgs – 20m TUBE HEAD / SCU 286 INTERCONNECTION CABLE A 1.7 kgs – 10m POWER SUPPLY CABLE A BAG FOR CABLES AND ACCESSORIES A SET OF SCU286 USERS MANUALS ACCESSORIES: 0000697 HEIGHT ADJUSTABLE STAINLESS STEEL SUPPORT 0000513 FLASHING LIGHT WITH 20m CABLE 0000514 - ALUMINIUM TRANSPORT CASE FOR SITE-X & ACCESSORIES 0000517 - AUDIBLE / FLASHING LIGHT WITH TRIPOD STAND AND 20m CABLE 0000551 - SCU286/ PERSONAL COMPUTER INTERCONNECTION CABLE 0000681 - INTER SCU286 INTERCONNECTION CABLE TO TRANSFER DATA 0000753 - EXPOSURE TIME COMPUTER SOFTWARE LOADED IN SCU286 0000686 - SAFETY LEAD CAP COMPLETE 0000541 - 60° X 40° DIAPHRAGM FOR DIRECTIONAL USE (REQUEST ITEM 000686) FULL TECHNICAL DATA SHEETS AND PRICES FOR ALL X-RAY UNITS ARE AVAILABLE ON REQUEST

SCU286

www.ndtes.co.uk

Page 2 Back to contents page

[email protected]

X-RAY EQUIPMENT SITE - X

PANORAMIC X RAY SETS DC CRAWLERS

NORMALLY OPERATING WITH CRAWLER CONTROL UNITS CCU 186 AND CCU 086 SERIES X RAY GENERATORS: C1603 C2004 C2254 C2504 C3003 C3203 -

160kV, 200kV, 225kV, 250kV, 300kV, 320kV,

1-3mA FOCAL SPOT 4mm DIA. X 0.5mm 1-4mA FOCAL SPOT 5mm DIA. X 0.5mm 1-4mA FOCAL SPOT 5mm DIA. X 0.5mm 1-4mA FOCAL SPOT 5mm DIA. X 0.5mm 1-3mA FOCAL SPOT 5mm DIA. X 0.8mm 1-3mA FOCAL SPOT 5mm DIA. X 0.8mm

ANGLE BEAM 360° (2X20°) ANGLE BEAM 360° (2X20°) ANGLE BEAM 360° (2X20°) ANGLE BEAM 360° (2X20°) ANGLE BEAM 360° (2X20°) ANGLE BEAM 360° (2X20°)

THE C1603 IS SPECIFICALLY DESIGNED FOR 6" TO 12" PIPE SIZES ALL UNITS FEATURE: - 100% DUTY CYCLE AT 40°C AMBIENT TEMPERATURE - A MICROCONTROLLER BOARD WITH TRUE kV AND mA MEASUREMENTS - A EMR ( BEAM HOMOGENEITY ) MICROCONTROLLED REAL TIME SYSTEM - WORKING AMBIENT TEMPERATURE: - 25°C to 70°C - FULLY LEAD SHIELDED - TRUE IP65 WEATHERPROOF WEIGHTS: - C1603 - C2004, C2254, C2504 - C3003 - C3203 DIMENSIONS: - C1603 - C2004, C2254,C 2504 - C2003, C3203

- 8kgs WITH CCU 086 CONTROL UNIT - 26kgs - 28kgs - 34kgs - 124mm DIA. X 510mm HIGH (INCLUDING CCU 086) - 248mm DIA. X 697mm HIGH - 248mm DIA. X 757mm HIGH

CRAWLER CONTROL UNIT CCU 086 FOR C1603 ONLY

CCU186

CRAWLER CONTROL UNIT CCU 186

- INPUT LINE FROM 40TO 60VDC TO 48VDC NOMINAL -1 kV STEP TUBE VOLTAGE KEYBOARD SELECTION -0.1mA STEP CURRENT TUBE KEYBOARD SELECTION (MIN 1mA) -DC INPUT VOLTAGE REGULATION BETTER THAN 0.2% -SEMI-AUTOMATED WARM UP PROCEDURE -WORKING AMBIENT TEMPERATURE - 25°C to 85°C -1kg FULLY MOUNTED ON THE BACK OF THE C1603 TUBEHEAD -OVERALL SIZE: SEE C1603 FULL SIZE ABOVE

-INPUT LINE FROM 85 TO 140VDC-120VDC NOMINAL -1 kV STEP TUBE VOLTAGE KEYBOARD SELECTION -0.1mA STEP CURRENT TUBE KEYBOARD SELECTION (MIN 1mA) - DC INPUT VOLTAGE REGULATION BETTER THAN 0.2% -SEMI-AUTOMATED WARM UP PROCEDURE -FULLY COMPATIBLE WITH ALL SITE-X TUBEHEADS -WORKING AMBIENT TEMPERATURE - 25°C to 85°C -4kgs FULLY MOUNTED INCLUDING AN ALUMINIUM COOLER -OVERALL SIZE: 170(H) X 280(D) X 162 (W) mm

SUPPLIED WITH: -A DISCONNECTABLE POCKET SIZE REMOTE CONTROL UNIT CCU 186R -A 2.0m INTERCONNECTION CABLE CCU 186R/CC086 -A 2.0m C1603 TUBEHEAD/CRAWLER INTERCONNECTION CABLE -A SET OF CCU086/CCU086R USER MANUALS

SUPPLIED WITH: - A DISCONNECTABLE AFTER SETTINGS POCKET SIZE REMOTE CONTROL UNIT - A 2.0m INTERCONNECTION CABLE CCU186R/CCU186 - A 2.0m TUBEHEAD / CCU186 INTERCONNECTION CABLE - A SET OF CCU186 USER MANUALS

CONVERSION KIT - FROM " CRAWLER " TO " STANDARD " ( NOT C1603 ) COMPRISING: THE SITE - X SCU 286 STANDARD CONTROL UNIT ONE GUARD -RING FOR COOLING SIDE (1.8kgs) ONE GUARD - RING FOR CONNECTOR SIDE (1.8kgs) 3 X 700mm FFD TELESCOPIC CENTERING DEVICES A 6.0kgs – 20m TUBE HEAD / SCU286 INTERCONNECTION CABLE A 1.7kgs – 10m POWER SUPPLY CABLE A BAG FOR CABLES AND ACCESSORIES A SET OF SCU286 USER MANUALS IN ENGLISH FULL TECHNICAL DATA SHEETS AND PRICES FOR ALL X-RAY UNITS ARE AVAILABLE ON REQUEST

www.ndtes.co.uk

Page 3 Back to contents page

[email protected]

X-RAY EQUIPMENT BATTERY POWERED X-RAY GENERATOR CP1201 Constant Potential Ultra lightweight Battery Powered X-Ray Generator For NDT and Security Inspections

X-RAY GENERATOR CP1201 – 120 KV CONSTANT POTENTIAL X-RAY GENERATOR CP1601 – 160 KV CONSTANT POTENTIAL An updated version with improved specification Specifications: Voltage output type: Voltage output range: Current output: Max Anode Dissipation: Focal spot: Useful angle beam: Inherent filtration: Max steel penetration: Max. continuous exposure time: Internal power supply: Working time till battery low Number of shots at full charge:

120

160

Constant Potential 60 to 120 kV 1 mA 120 watts 0.25 x 0.5mm 60° x 40° equiv. 3.5mm Al. >10mm steel> 600 Sec. 36 VDC Ni-Cd 6min. at 20°C 40 shots

Constant Potential 60 to 160 kV 0.5 mA or greater 80 watts 0.4 x 0.8mm 55° x 40° equiv. 3.5mm Al. 21mm steel 99 Sec. 36 VDC Ni-Cd 6min 100 shots

Further Information is Available Upon Request.

FLEXIBLE DIGITAL RADIOGRAPHY SYSTEM Capture images using a reusable flexible imaging plate designed to be positioned and exposed in the same manor as the conventional photographic X-Ray film already familiar to site operators. After exposure the imaging plate is easily scanned to produce the Digital Electronic X-Ray image, which is viewed on the display monitor.

Captured Digital Radiographs Radiograph Data Sheets Digital Radiographic Image Archive DR4200 W NDE Information Retrieval Central Management System

Inspectors Reports Corrosion & Condition Management

Multi Project Information Local Sites Remote Sites

Risk Based Inspection Reports Digitalised Film Radiographs Radiograph Data Sheets

25 Years or 50 Years Data Life

Conventional Radiographs Digitalised Image Archive

Inspectors Reports Corrosion & Condition Management

Multi-customer / Multi-projects

Risk Based Inspection Reports

Page 4 Back to contents page

GAMMA RAY EQUIPMENT Iridium 192 Projectors & Accessories Cat Number 880 Projector, maximum capacity either 50ci Elite , 150ci Delta Controls and Accessories SAN 88525 SAN 88225

664 Cable Reel/Hand crank with 25` cables 693 Pistol Grip Hand crank with 25` cables Other lengths available Drive Cables, Source Tubes and Stops 48906 Original QSA Product Source Guide Tube with Fixed Stop 2.1m 48907 Original QSA Product Source Guide Tube Extension 2.1m Guide Tube Swivel Adaptor, enables standard guide tube to fit 88081 880 projector Corbin Key Full size dummy source for 660 52401-1 Shipping Plug with wire storage plug 66001-39 Storage Cover with chain 55008 GO/NO GO Gauge 660 Side Plates Source Positioning and Centering Tubes and Stops Three Prong Clamp Boss Head Retort Base Retort Rod Pipe Centering Devices :- Also See Page 83 Device 1.0 For pipes 90-310mm (3.5” - 12”) Device 1.1 For pipes 105—420mm (4” - 16”) Device 2.1 For pipes 280—900mm (10” - 35”) Source Terminal Source Terminal 495mm For 1.0 and 1.1 Source Terminal Source Terminal For 2.1 Collimators TCN827 Tungsten Collimator (4.3lbs) TCN714 Mini Lead Collimator with 60 degree conical beam 1.5kg TCN799 Type 6 Mini Tungsten Collimator, side port 60 degree cone. NDT Manufacture Mini Tungsten Collimator Collimator clamp Mini Tungsten Collimator clamp Other Collimators are available on request

Price (£) 9,000.00 2,552.58 1755.60 160.45 160.45 80.00 20.00 190.00 82.00 93.53 25.00 POA 9.00 9.00 17.00 11.00 1639.00 1738.00 3223.00 295.00 324.00 987.00 325.00 329.00 205.00 60.00

Mini Tungsten Collimator & Clamp Guide Tubes

693 Pistol Grip

664 Windout

Pipe Centering Devices Page 5 Back to contents page

880 Projectors

RADIOACTIVE ISOTOPES Prices below are meant as a guide only, please ask for a latest price before committing to a purchase order. Other activity amounts are available. All buyers may be asked for an “End User Statement” to satisfy UK / USA laws, and may be subject to a export licence outside the UK, IRIDIUM 192 Activity 100 Ci 80 Ci

Active Dimensions 3mm x 2.5mm 3mm x 2.0mm

70 Ci 60 Ci 50 Ci 40 Ci 30 Ci 20 Ci

3mm x 2.0mm 2mm x 2.5mm 2mm x 2mm 2mm x 1.5mm 2mm x 1mm 2mm x 1mm

SELENIUM 75 Activity 20Ci 30Ci 40Ci 50Ci 60Ci 70Ci

Active Dimensions 2.00mm F Spherical 2.50mm F Spherical 2.50mm F Spherical 2.85mm F Spherical 2.85mm F Spherical 3 x 3mm Quasi - Spherical

Price (£’s) POA POA POA POA POA POA

80Ci

3 x 3mm Quasi - Spherical

POA

Price (£’s) POA POA POA POA POA POA POA POA

Other Isotopes are available, prices on request.

RM100. / RM 2000 Survey Meter

www.ndtes.co.uk

MB30 See page 7 for prices

Page 6 Back to contents page

[email protected]

RADIATION SAFETY Personal Dosimeters and Monitors

Price (£)

Quartz Fibre Pocket Dosimeter 0-200mR other ranges available

130.00

Charger for Quartz Fibre Pocket Dosimeter

150.00

EPD Mk2

Electronic Personal Dosimeter

POA

ACT5

Reader for Electronic Personal Dosimeter

POA

EASY EPD 2

Software for the Electronic Personal Dosimeter Reader

POA

PRM100D

Personal Radiation Monitor / Bleeper with LCD,& LED

245.00

MB3

Personal Radiation Monitor with LED

179.00

Bleeper 111

Bleeper

205.00

Bleeper SV

Bleeper with LCD

285.00

Bleeper SV SW

Bleeper SV with on/off switch

310.00

Personal Alarms

Survey Meters

ND1000SA

Radiation Survey Meter. Analogue display (see page 6) 0-100 or 0-2000 µSv / hour Radiation Survey Meter.

RDS31

Digital Survey Meter c/w Calibration Certificate

1010.00

Tracerco Radiation Monitor. Intrinsically Safe

POA

NDT RM2000 / RM100

795.00 699.00

Other Types Are Available I.S. Survey Meter Tracerco T202 Portable Warning Equipment MB30

HL-95

MB3

Portable Radiation Warning System (see page 6) C€ approved

850.00

Extension Beacon for above Red Xenon Beacon

185.00

Foghorn Hand Held Warning Siren Operated By Compressed Air Canister

POA

Spare Canister for above

POA

Mini Flashing Lamp c/w 9 volt Battery

12.00

Hazard Warning Lamp c/w Special Air Depolarised Battery Status Enunciator c/w Lamp Failure Interrupt, 2 x Enunciator and Interface

POA

As above with additional Siren Failure Interrupt

POA

Radiographic Facility Alarm

POA

Quartz Fibre Dosimeter & Charger

www.ndtes.co.uk

425.00

Bleeper SV Page 7 Back to contents page

PRM100D

EPD Mk2

[email protected]

RADIATION SAFETY Handling Tongs and Lead Shot Cat Number Description Handling Tongs 100cm long Handling Tongs 150cm long Handling Tongs 200cm long Lead Shot 2 Kg bags Barriers Barrier Rope 6mm diameter, 110 metre roll Radiation Warning Banner, 10m long x 100mm wide Warning Message and Trefoil, any language Radiation Barrier Tape Continuously printed with trefoil and ‘Stop Radiation Keep Out’ 40mm x 50m English or English/Arabic As above complete with Windout Dispenser Exposure Accessories S.C.R.A.T.A. Gamma Ray Exposure Calculator, Metric Scale Mk.V111 – New Slide Rule Design (Cobalt 60, Iridium 192, Ytterbium 169) Adhesive Black Lightproof Tape 50mm x 33 metre roll Adhesive Black Waterproof Tape 50mm x 50 metre roll Adhesive Masking Tape 25mm x 50 metre roll Adhesive Masking Tape 50mm x 50 metre roll Chinagraph Pencils, Yellow (Box 12) WWL Warehouse Marking Crayons, Yellow (Box 12) WWT Timber Marking Crayons, Yellow (Box 12) Paint Marker, White , red or yellow 750 Permanent Paint Marker, White, Medium Conical Fibre Tipped Tempilsticks, from 38 deg C to 1371 deg C Other Markers and Colours available to order Pressident Marking System Pressident Tape Elastic Straps (Bungy Band) 12” length Elastic Straps (Bungy Band) 18” length Elastic Straps (Bungy Band) 24” length Cassette Clamping Magnets, Film Bridge Type, Per Pair Flexible Lead Vinyl Sheet PB25 Pale Green 0.25mm Pb (100 x 60cm) PB50 Beige 0.50mm Pb (100 x 60cm) PB10 Grey 1.00mm Pb (100 x 60cm) Lead Aprons SS310 Single (Front only) 0.35mm Pb, Length 100cm DS310 Double Sided 0.35mm Pb, Length 100cm Safety Gloves 0.48mm PB/Rubber (Pair, size Medium) Safety Glasses (No side PB)

Price (£) 34.00 38.00 42.00 22.50 20.00 26.83 47.00 77.50 42.50 15.00 11.50 3.50 4.25 11.00 4.10 4.30 4.65 3.75 P.O.A 365.00 12.00 2.64 4.00 4.54 55.00 125.00 212.22 412.79 113.30 195.20 255.75 137.50

Tempil Stick Handling Tongs Lead aprons

www.ndtes.co.uk

Radiation Barrier Tape Page 8 Back to contents page

[email protected]

RADIATION SIGNS Radiation Signs Rectangular signs in white PVC printed in red, yellow and black. Trefoil warning signs are in yellow and black. Prohibition signs are in red and black. Each has a space for the name of the Radiation Protection Supervisor and his telephone number. All of the signs are to the same basic design, conforming to the current ionizing radiations regulations. They differ in the wording beneath the trefoil and in the prohibition. Signs are illustrated on the following page. Wherever a Controlled or Supervised Area is designated the signs must indicate all of the following :- The designation of the area; The nature of the radiation source & The risks arising . Cat Number 70721 70722 70723 70724 70725 70726 70727 70728

Description Rigid Self Adhesive Rigid Self Adhesive Rigid Self Adhesive Rigid Self Adhesive

Size 320mm x 400mm 320mm x 400mm 320mm x 400mm 320mm x 400mm 320mm x 400mm 320mm x 400mm 320mm x 400mm 320mm x 400mm

Price (£) 16.95 8.86 16.95 8.86 16.95 8.86 16.95 8.86

70729

Rigid

320mm x 400mm

16.95

70730 Self Adhesive 320mm x 400mm 8.86 Square sign in white PVC printed in black and yellow. This sign has a black ISO trefoil, triangle and has NO lettering. The inside of the triangle is yellow. 70731 Rigid 300mm x 300mm 12.85 70732 Self Adhesive 300mm x 300mm 8.20 Rectangular sign in white PVC printed in black and yellow. This sign has a black ISO trefoil, triangle and lettering. The inside of the triangle is yellow. 70733 Rigid 300mm x 450mm 15.14 70734 Self Adhesive 300mm x 450mm 8.20 Rectangular sign in flexible yellow PVC to USA Standard. Black ISO trefoil symbol and magenta lettering for threading onto barrier rope. 70708 Welded 205mm x 285mm 2.21 70709 Welded 205mm x 285mm 2.21 70710 Velcro 205mm x 285mm 3.29 70711 Velcro 205mm x 285mm 3.29 Rectangular warning pennant in yellow, flexible PVC. This sign has a black ISO trefoil, triangle and lettering for threading onto barrier rope. 70735 Welded 205mm x 285mm 2.21 70736 Velcro 205mm x 285mm 3.29 Rectangular sign printed in English/Arabic. Yellow laminate with red trefoil and black printing. Self Adhesive 380mm x 430mm 11.77 Welded 380mm x 430mm 12.55 Rigid 380mm x 430mm 16.89 Vehicle Warning Signs Self Adhesive 250mm x 250mm 2.03 Rigid 250mm x 250mm 6.49 Magnetic 250mm x 250mm 11.75 In accordance with The Radioactive Material (ROAD TRANSPORT) Regulations 2002 Orange Plate Magnetic 300 x 250mm (For large van) 22.11 Magnetic 300 x 120mm (For small van/car) 11.68

www.ndtes.co.uk

Page 9 Back to contents page

[email protected]

RADIATION SIGNS

Cat 70708 – Welded – 70709

Cat 70727 – Rigid Cat 70728 – Self Adhesive

Cat 70735 – Welded Cat 70736 - Velcro

Cat 70721 – Rigid Cat 70722 – Self Adhesive

www.ndtes.co.uk

Cat 70710 – Velcro – 70711

Cat 70729 – Rigid Cat 70730 – Self Adhesive

Cat 70731 – Rigid Cat 70732 – Self Adhesive

Cat 70723 – Rigid Cat 70724 – Self Adhesive

Page Page10 10 Back to contents page

Cat 70725 – Rigid Cat 70726 – Self Adhesive

Cat 70733 – Rigid Cat 70734 – Self Adhesive

Vehicle Radiation Sign. Rigid, Self Adhesive & Magnetic

[email protected]

PLASTIC CASSETTE INFORMATION Plastic Cassettes All types of Single-Envelope Plastic Cassettes are of the same design. They consist of a single envelope, open at one end, through which film and screens are loaded and unloaded. The open ends of the envelopes fold over, producing an effective light seal. They are then held closed by means of VELCRO’ nylon fastener. There is an extra finger-tab at the bottom to assist in holding the cassette to the bench for easier and quicker unloading. Closure is normally made on the shorter side of a rectangular cassette, special versions, with the opening on the long side, can be made to order.

STANDARD SINGLE ENVELOPE CASSETTES These are made from 400 micron black PVC and have become, over the years, the standard cassette for industry. We do not recommend their use in very cold weather and advise great care in loading and unloading them in sub-zero temperatures. REINFORCED SINGLE ENVELOPE CASSETTES These are made from thin, yet strong PVC/ Nylon/PVC laminated material. The nylon reinforcement is in the form of a mesh and reduces the tendency of the PVC to split at the seams after much use. The PVC laminate retains its flexibility in cold climates. Reinforced cassettes are therefore more suitable for use at low temperatures than the Standard type.

ONE SEAM SINGLE ENVELOPE CASSETTES These represent the first major advance in cassette design since the introduction of ‘VELCRO’ fastening. Constructed in rugged nylonreinforced PVC, they are made to outlast any other type of flexible cassette. They are constructed without side-seams, there is just one joint on the back of the cassette. This design overcomes the weakness of other single envelopes that are welded along the sides; there is no tendency to split. The Cassettes are made from specially - formulated, heavy-duty, nylon-reinforced PVC. They are black on the inside for light-tightness and yellow on the outside for easy recognition.

HEAVY DUTY SINGLE ENVELOPE CASSETTES These are made from double-thickness material consisting of one layer of standard PVC and one layer of the nylon-reinforced material. This combination produces a cassette capable of withstanding very tough treatment at normal temperatures. DOUBLE ENVELOPE CASSETTES These consist of two plain black envelopes without any means of closure. Film and screens are loaded into the inner envelope, the smaller of the two. This is then inserted, open end first, into the larger outer envelope. Light – tightness is assured due to the open end of the inner is up against the closed end of the outer. They are made from the standard 400 micron material and are clearly marked ‘INTEX BACK’ on both the inner and the outer envelope for easy identification in the darkroom and out on site. The main advantage of Double-Envelope Cassettes is that they lie perfectly flat, having no fold-over ends or ‘VELCRO’ fastening.

www.ndtes.co.uk

Page 11 Back to contents page

[email protected]

RADIOGRAPHIC ACCESSORIES - CASSETTES NYLON (£) Reinforced 2.22 2.66 2.48 2.90 3.11 3.10 3.33 2.56 2.97 3.07 3.63 3.99

ONE SEAM (£)

DOUBLE (£)

HEAVY DUTY (£)

2.75 3.39 3.09 3.70 4.00 3.92 4.27 3.06 3.62 3.76 4.55 5.08

2.48 2.94 2.76 3.27 3.51 3.53 3.82 2.98 3.51 3.64 4.28 4.71

2.87 3.58 3.23 3.91 4.24 4.16 4.54 3.18 3.78 3.94 4.81 5.39

13 x 18cm 2.51 3.31 3.96 15 x 40cm 3.52 4.88 6.14 18 x 24cm 3.45 4.55 5.52 18 x 43cm 4.03 5.51 6.91 20 x 30cm 4.01 5.94 6.60 24 x 30cm 4.75 6.33 7.81 30 x 40cm 6.12 8.18 10.18 35 x 43cm 7.41 9.96 12.40 Canvas Cassette 70mm x 20 metre Roll – Side Seam Cassette Clamping Magnets, Film Bridge Type, Per Pair

4.03 5.96 5.68 6.84 6.73 8.00 10.37 12.56

4.15 6.49 5.87 7.33 6.95 8.20 10.76 13.23 215.71 58.30

SIZE

STANDARD (£)

5 x 20cm 5 x 40cm 6 x 24cm 6 x 40cm 6 x 48cm 7 x 40cm 7 x 48cm 9 x 12cm 10 x 20cm 10 x 24cm 10 x 40cm 10 x 48cm

1.55 1.81 1.75 2.00 2.12 2.15 2.29 1.91 2.19 2.26 2.58 2.80

Bridge Clamping Magnets

Standard Cassettes

www.ndtes.co.uk

Page 12 Back to contents page

[email protected]

RADIOGRAPHIC ACCESSORIES – SCREENS - MARKERS Lead Intensifying Screens. 125/.125mm Thick Size 5 Pair Pack (£) 10 Pair Pack (£) 5 x 20cm 14.95 23.28 5 x 40cm 22.45 36.78 6 x 24cm 19.09 30.96 6 x 40cm 27.22 45.67 6 x 48cm 30.34 51.61 7 x 40cm 31.77 54.09 7 x 48cm 35.66 61.52 9 x 12cm 18.68 30.04 10 x 20cm 22.45 36.78 10 x 24cm 24.73 41.14 10 x 40cm 35.81 61.55 10 x 48cm 40.38 70.27 13 x 18cm 28.43 47.74 15 x 40cm 48.44 85.33 18 x 24cm 46.74 82.07 18 x 43cm 64.23 115.25 20 x 30cm 48.44 85.33 24 x 30cm 55.29 98.39 30 x 40cm 85.21 155.09 35 x 43cm 101.01 185.09 Lead Screen Roll .125mm thick, 70mm x 30 meters. Other thicknesses are available. Please ask for further information

25 Pair Pack (£) 48.28 79.80 66.56 101.00 115.33 121.67 139.10 64.13 79.80 90.37 138.80 159.93 105.70 195.98 188.06 268.35 195.98 227.69 364.69 437.32 POA

Please note: lead markers below are sold in lots of 10 each type of character and a minimum of 10 each characters per order Lead Markers, Sharp Faced, Un-mounted (Mounted Price on request)

Price Per 10 Pack (£)

6mm (1/4”) A-Z 6mm (1/4”) 0-9 6mm (1/4”) Arrow symbol 10mm (3/8”) A-Z 10mm (3/8”) 0-9 10mm (3/8”) Arrow symbol 13mm (1/2”) A-Z 13mm (1/2”) 0-9 13mm (1/2”) Arrow symbol Heavy Duty Plastic, Marker Storage Box, 40 compartments Other lead marker sizes available to order

Flat faced

Symbol

Sharp faced Page 13

Back to contents page

1.10 1.10 1.65 1.65 1.65 1.90 2.15 2.15 2.40 65.00

Mounted

RADIOGRAPHIC ACCESSORIES – MARKER TAPES Lead Marker Tapes Marker Tapes are placed around the circumference of weld, adjacent to weld seam. Small lead numerals at 2, 5 or 10cms, inside heat resistant cloth/plastic tape are clearly visible in processed radiographs for the accurate location of suspect areas in welds for investigation or repair. 2cm Spacing 5cm Spacing Length 10cm Spacing (£) (£) (£) 0.5m 9.60 4.80 N/A 1m 19.30 9.70 6.15 1.5m 30.10 14.60 9.50 2m 40.70 19.40 12.80 2.5m 3m 3.5m 4m 5m 6m 7m

50.10 58.30 69.40 -

24.30 29.10 34.00 38.90 48.60 58.40 68.10

16.20 19.50 22.30 26.10 32.80 39.50 46.15

8m 77.80 53.00 9m 87.60 59.50 10m 100.90 68.50 12m 121.00 81.63 15m 156.40 101.70 20m 211.80 136.55 Marker tapes can be produced to any length/increment. Prices available on application Magnetic Marker Tapes These are made from hard, yet flexible magnetic rubber faced with white PVC. Embossed lead identification markers are placed either at 5 or 10cm intervals. The markers are thick enough to ensure visibility on the radiograph without causing glare. They adhere firmly to all ferrous surfaces and do not require two-man operation. Sizes and prices are available on application.

Lead Tapes

www.ndtes.co.uk

Page 14 Back to contents page

[email protected]

RADIOGRAPHIC ACCESSORIES – IQI’s Image Quality Indicators EN 462 – 1 Each indicator consists of a series of seven parallel wires of different thickness and 10, 25 or 50mm long mounted between two thin sheets of transparent, flexible PVC. A lead monogram indicates the numbers of the thinnest and the thickest wires, the material and includes the EN symbol. Model 1 FE EN 10mm 1 FE EN 25mm 1 FE EN 50mm

Price (£) N/A N/A 12.50

Model 6 FE EN 10mm 6 FE EN 25mm 6 FE EN 50mm

Price (£) 10.50 10.50 10.50

1 AL EN 10mm 1 AL EN 25mm 1 AL EN 50mm

POA POA 12.50

6 AL EN 10mm 6 AL EN 25mm 6 AL EN 50mm

10.50 10.50 10.50

1 CU EN 10mm 1 CU EN 25mm 1 CU EN 50mm

POA POA 12.50

6 CU EN 10mm 6 CU EN 25mm 6 CU EN 50mm

10.50 10.50 10.50

10 FE EN 10mm 10 FE EN 25mm 10 FE EN 50mm

10.50 10.50 10.50

6 TI EN 10mm 6 TI EN 25mm 6 TI EN 50mm

N/A N/A 50.00

10 AL EN 10mm 10 AL EN 25mm 10 AL EN 50mm

10.50 10.50 10.50

13 FE EN 10mm 13 FE EN 25mm 13 FE EN 50mm

13.50 13.50 13.50

10 CU EN 10mm 10 CU EN 25mm 10 CU EN 50mm

10.50 10.50 10.50

13 AL EN 10mm 13 AL EN 25mm 13 AL EN 50mm

15.50 15.50 15.50

10 TI EN 10mm 10 TI EN 25mm 10 TI EN 50mm

50.00 50.00 50.00

13 CU EN10mm 13 CU EN 25mm 13 CU EN 50mm

13.00 13.00 13.00

EN462—5 Duplex

795.00

13 TI EN 10mm 13 TI EN 25mm 13 TI EN 50mm

52.00 52.00 52.00

1 FE EN N Wire Diameter o. (mm) 1 3.20 2 2.50 3 2.00 4 1.60 5 1.25 6 1.00 7 0.80 Use for material 40 – 160mm thick

www.ndtes.co.uk

6 FE EN Wire Diameter No. (mm) 6 1.00 7 0.80 8 0.63 9 0.50 10 0.40 11 0.32 12 0.25 Use for material 12.5 – 50mm thick

10 FE EN Wire Diameter No. (mm) 10 0.40 11 0.32 12 0.25 13 0.20 14 0.16 15 0.125 16 0.100 Use for material 5 – 20mm thick

Page 15 Back to contents page

13 FE EN Wire Diameter No. (mm) 13 0.20 14 0.16 15 0.125 16 0.100 17 0.080 18 0.063 19 0.050 Use for material 2.5 – 10mm thick

[email protected]

RADIOGRAPHIC ACCESSORIES – IQI’s Image Quality Indicators Each indicator consists of a series of six parallel wires of different thickness and 25 or 50mm long mounted between two thin sheets of transparent, flexible PVC. Lead characters identify the wire thickness and the material. The letters ASTM are also included. Standard ASTM E – 747-97

Standard ASTM E – 747-97

Standard ASTM E – 747-97

Standard ASTM E – 747-97

Wire Diameters (mm) Set A 0.08 Set B 0.25 Set C 0.81 Set D 2.50

Model Set A1 (FE)

Wire Length 50mm

Price (£) 13.50

Set B1 (FE)

50mm

13.50

Set C1 (FE) Set D1 (SS) Model Set A02 (AL) Set B02 (AL) Set C02 (AL) Set D02 (AL) Model Set A4 (CU) Set B4 (CU) Set C4 (CU) Set D4 (CU) Model Set A01 (TI)

50mm 50mm Wire Length 50mm 50mm 50mm 50mm Wire Length 50mm 50mm 50mm 50mm Wire Length 50mm

13.50 70.00 Price (£) 15.00 15.00 22.00 75.00 Price (£) 14.00 14.00 20.00 75.00 Price (£) 52.00

Set B01 (TI)

50mm

52.00

0.10 0.33 1.02 3.20

0.13 0.40 1.27 4.06

0.16 0.51 1.60 5.10

0.20 0.64 2.03 6.40

0.25 0.81 2.50 8.00

ASTM indicators are also available in 25mm lengths (with the exception of set D) Certificates of Conformity are available for DIN 54 109 and ASTM on request. Price per indicator £1.00.

Product Protection Test Cards Primarily used in the food industry to detect foreign bodies in food products . Typically the cards have a single item that has been found previously in food stuff (i.e glass, plastic & metals ). Inclusions can be made of any practical size and material. All test cards are Certified. Prices on application

www.ndtes.co.uk

Page 16 Back to contents page

[email protected]

See page 7 for prices

Page 17 Back to contents page

RADIOGRAPHIC FILM; QUALITY CONTROL GE Inspection Technologies (AGFA) Cat Number Description Size Price (£) 31RWN AGFA D7 Film (Box 100 sheets) FW 10 x 20cm POA 28UMM AGFA D7 Film (Box 100 sheets) FW 10 x 24cm POA 28UQU AGFA D7 Film (Box 100 sheets) FW 10 x 40cm POA 27K1Z AGFA D7 Film (Box 100 sheets) FW 10 x 48cm POA 27K58 AGFA D7 Film (Box 100 sheets) FW 13 x 18cm POA 27K9H AGFA D7 Film (Box 100 sheets) FW 15 x 40cm POA 28UYC AGFA D7 Film (Box 100 sheets) FW 18 x 24cm POA 28U3L AGFA D7 Film (Box 100 sheets) FW 18 x 43cm POA 27LDS AGFA D7 Film (Box 100 sheets) FW 24 x 30cm POA 27LH1 AGFA D7 Film (Box 100 sheets) FW 30 x 40cm POA 27LMA AGFA D7 Film (Box 100 sheets) FW 35 x 43cm POA 27J78 AGFA D7 Rollpac PB (With lead screens) 70mm x 90m POA 28LUZ AGFA D7 Rollpac PB (With lead screens) 100mm x 90m POA Full AGFA Film range available.(D2 to D8) Details on request. KODAK Industrial X-Ray Films Cat Number Description Size Price (£) 609.5954 KODAK AA 400-1 Film (box 100 sheets) NIF 9 x 12cm POA 526.9618 KODAK AA 400-1 Film (box 100 sheets) NIF 10 x 24cm POA 522.9760 KODAK AA 400-1 Film (box 100 sheets) NIF 10 x 40cm POA 522.9786 KODAK AA 400-1 Film (box 100 sheets) NIF 15 x 40cm POA 609.5699 KODAK AA 400-1 Film (box 100 sheets) NIF 24 x 30cm POA 609.5707 KODAK AA 400-1 Film (box 100 sheets) NIF 30 x 40cm POA 654.9471 KODAK AA 400-1 Film (box 100 sheets) NIF 35 x 43cm POA KODAK AA 400-382 Film Leadpack Roll (with Lead 523.0214 70mm x 100m POA screens) KODAK AA 400-382 Film Leadpack Roll (with Lead 523.0222 100mm x 100m POA screens) Full KODAK Film range available. Details on request. **Please Check Prices Prior to Order** Please note: due to the fluctuation in price of Silver the above Film prices should be confirmed prior committing to a purchase order. Prices are correct at date of printing Quality Control A simple method to determine Archival Quality of a processed X-ray film. Also indicates badly fixed and/or Washed films which may require additional treatment. Structurix Thio-Test Kit (Colour Comparator Set) requires: Cat Number Description Price (£) 3M2HM Thiotest Reagent 35cc POA FT5AL Thiotest Colour Comparator POA 3UEPB Structurix Certified Denstep (Certified Traceable to NBS) POA Exposed, unprocessed PMC Strips in individual daylight packing used to Monitor the performance of Processed Chemical solutions for high quality processing 3Q210

Processor Monitoring Control (PMC) Strip (Box 50)

www.ndtes.co.uk

Page 18 Back to contents page

POA

[email protected]

RADIOGRAPHIC ACCESSORIES - CHEMICALS GE Inspection Technologies (AGFA) Cat Number Description 35WGB G135S Starter 1LTR HNKDU G135 Developer (2 x 5 litres to make 40 litres) Auto Processing 38WRN G335 Fixer (2 x 5 litres to make 40 litres) Auto Processing 35TBN G128 Developer (4 x 5 litres to make 100 litres) Manual Processing 35TAL G328 Fixer (4 x 5 litres to make 100 litres) Manual Processing

Price (£) POA POA POA POA POA

KODAK X-Ray Processing Chemicals Cat Number Description Pack Size Price 515.5924 Kodak INDUSTREX MANUAL DEVELOPER 2 x 20 litres POA This liquid developer is recommended for all KODAK X-ray films. It is supplied in a pack containing two bottles, each of which makes 20 litres of working solution at a dilution of 1+4. It can also be used as a replenisher chemical if the rate of dilution is changed to 1+3. 5159082 Kodak INDUSTREX FIXER 2 x 20 litres POA This liquid fixer is recommended for all KODAK X-ray films, It is supplied in a pack containing two bottles, each of which makes 20 litres of working solution.

835.1413 Kodak INDUSTREX DEVELOPER STARTER POA This is added to the developer/replenisher in the processor, after initial filling, to make 40 litres working strength solution. 1.2L

www.ndtes.co.uk

Page 19 Back to contents page

[email protected]

RADIOGRAPHIC ACCESSORIES – FILM PROCESSING Channel Hangers (Slide in) Stainless Steel Films are held within grooves along both sides and bottom edge and secured by a hinged flap along the top edge. Films must be removed from the Channel Hanger before placing in a dryer in order to avoid drying marks. Size Description Single (£) Triple (£) 9 X 12cm 10 X 24 cm 10 X 40 cm 10 X 48 cm 15 X 40 cm 18 X 24 cm 24 X 30 cm 30 X 40 cm 35 X 43 cm Other sizes available P.O.A.

Channel Hanger Channel Hanger Channel Hanger Channel Hanger Channel Hanger Channel Hanger Channel Hanger Channel Hanger Channel Hanger

44.00 44.00 44.00 44.00 44.00 44.00 52.00 52.00 52.00

N/A 100.00 100.00 100.00 N/A N/A N/A N/A N/A

Processing Spirals (Spools) Stainless Steel For roll film 70mm wide, any length up to 5 metres maximum Spiral Loader For processing spool 70mm x 3m Size Description 70 mm x 3m Roll Film Processing Spiral 70mm x 5m Roll Film Processing Spiral 100mm x 3m Roll Film Processing Spiral 100mm x 5m Roll Film Processing Spiral 12” length Processing Spiral Rod 25” length Processing Spiral Rod 30” length Processing Spiral Rod Processing Accessories Description

Price (£) POA Price (£) 96.50 104.00 96.50 104.00 45.00 45.00 45.00 Price (£)

Film Drying Clip with hook Processing Tanks Capacity 13.5 litres 3 Gallons 22.5 litres 5 Gallons 45.0 litres 10 Gallons Processing Tank Lids Capacity 13.5 litres 3 Gallons 22.5 litres 5 Gallons 45.0 litres 10 Gallons

www.ndtes.co.uk

3.00

Grey PVC 53.00 60.00 70.00

Stainless Steel 150.00 175.00 190.00

Grey PVC 22.10 22.60 25.10

Stainless Steel 60.00 60.00 70.00

Page 20 Back to contents page

[email protected]

RADIOGRAPHIC EQUIPMENT – FILM PROCESSING Manual Film Processing Units Rigid PVC material with thermostatically controlled heater and digital temperature display. Prices include PVC tanks listed below. Requires suitable cold water and power supply. Model GP2

Price (£)

Developer

1 x 22.5L (5 gallon) with lid

Final Wash 250mm length

Stop bath

1 x 13.5L (3 Gallon)

Dimensions 920 x 670 x 880mm

Fixer

1 x 22.5L (5 gallon)

Shipping 1040 x 880 x 1130mm

Developer

1 x 22.5L (5 gallon) with lid

Final Wash 345mm length

Spray rinse

1 x 22.5L (5 gallon)

Dimensions 1220 x 680 x 880mm

Fixer

2 x 22.5L (5 gallon)

Shipping 1350 x 800 x 1130mm

Developer

1 x 45L (10 gallon) with lid

Final Wash 215mm length

Stop bath

1 x 45L (10 gallon)

Dimensions 1220 x 680 x 880mm

Fixer

1 x 45L (10 gallon)

Shipping 1350 x 800 x 1130mm

107kg

2097.00

203kg

2557.00

203kg

2457.00

Model GP3A

Model GP3C

Auto Film Processors from GE (Agfa) EQFKZ

Nova , C/W light tight cover, customer service documentation / spare parts list, operator manual & international mains connection cable. Various options and accessories available

POA

ECANF

NDT M eco , full range of Various options and accessories available

POA

38P6N

NDT U, full range of Various options and accessories available

POA

Other Structurix models, options and accessories available, data sheets & prices on request Packing and Shipping to UK Address Extra (Approx. £130.00)

NDT M eco

Nova

www.ndtes.co.uk

Page 21 Back to contents page

[email protected]

RADIOGRAPHIC EQUIPMENT – LAMPS, DRYERS, SUNDRIES Safe lamps

Price £ 2’ Fluorescent Safe Light complete with fixings

85.75

Spare UV Tube for Above

58.00

‘A’ Dome Red Safelight

40.00

Safelamp Bulb, 25watt BC fitting

POA

Glow Bright Safelight

240.00

Sundry Items

Price £ Tank Syphon, Plastic

P.O.A

Immersion Heater, 500 watt, 240 volt, figure ‘8’ type

247.50

Mixing Paddle, Plastic

24.25

Film ‘Squeegee’, Approx 13cm ( 4.5” ) Rubber Blade

25.00

Film ‘Squeegee’, Approx 23cm ( 9” ) Rubber Blade

40.00

Floating Thermometer

35.00

Dark Room Wall Clock (Luminous Figures & Hands)

38.50

Triple Digital Timer

19.00

Digital Stopwatch, Plastic Case

9.98

Film Storage Box for 70mm Roll Films with 25 compartments

POA

Light Operated Film Marker

325.00

Paper Folders (boxes of 500)

P.O.A

Film Dryers EWTHW

Price £ Structurix DR Roller Film Dryer, 63cm x 60cm x 35cm 220/240v 50/60Hz or 120v 60Hz, Full specification available on request

P.O.A

Darkroom Safelight

Structrix Dryer

Film ‘Squeegee’ 23cm

‘A’ Dome Red Safelight

www.ndtes.co.uk

Triple Timer Page 22 Back to contents page

Film ‘Squeegee’ 13cm

[email protected]

DENSITOMETERS Price (£)

Densitometers and Density Strips DDS3 Digital Densitometer

345.00

Digit-X Densitometer

510.00

X-Rite 301X Digital Densitometer (0-5D) X-Rite 331 Densitometer X-Rite 361T Digital Densitometer (0-5D) X-Rite 341 Densitometer Calibrated Density Comparison Strip to ASTM E 1079 AGFA Calibrated Denstep Kodak Density Step wedge 0.2-40 With Certification IIW set of ref. radiographs to ISO5817 set of 67 cards

1,704.45 1,247.00 2,410.00 1,080.00 66.85 125.00 199.47 2,350.00

X-Rite 301 Densitometer DDS3

X-Rite 341 X-Rite 361T

X-Rite 331 AGFA Density Step wedge

www.ndtes.co.uk

Page 23 Back to contents page

[email protected]

RADIOGRAPHIC EQUIPMENT – VIEWERS, DENSITOMETERS, METERS Luminance -The screen luminance required depends on the density of the radiographs. The following luminance levels are recommended for the perception of information at various levels. The luminance (or brightness) of the illuminated radiograph shall be not less than: 30 cd/m2 for film densities < 2.5 10 cd/m2 for film densities > 2.5 and wherever possible, approximately 100 cd/m2 or higher. These minimum values require the following screen luminance’s. Film Density 1 1.5 2 2.5 3 3.5 4 4.5 Cat Number

Minimum Screen Luminance cd/m2 300 1,000 3,000 10,000 10,000 30,000 100,000 300,000

Film Viewers Lumin S Executive High Intensity Viewer (Density 3.5) Lumin S 500 Film viewer (Density 3.0)

Price (£) 450.00 275.00

Kowolux Model 3 Film viewer (Density 4.4)

1,458.00

Spare Tube for Lumin S viewers

12.50

Spare Bulb for Kowolux Model 3 viewer

71.50

Cat Number

Light Meters

MKV1

Combined UV/White Light Meter

650.00

270652000

UVe-Lux Single Sensor UV/White Light Meter

864.00

J221

UV Light Meter

478.00

www.ndtes.co.uk

Price (£)

Page 24 Back to contents page

[email protected]

INSPECTION MIRRORS – MAGNIFIERS – VELCRO TAPES Inspection Mirrors

Description

Price (£)

Telescopic Handle/Pocket type, 32mm diameter Mirror Telescopic Handle/Pocket Type, 51mm diameter Mirror Fixed Handle, 365mm length, 5.5cm diameter Mirror Inspection Mirrors and Parts:  Battery Handle c/w Batteries  Light Probe ‘STAYPUT’ Flexible Section 150mm, Rigid 200mm length  Probe Extension Piece, Rigid 380mm length  Mirror, Articulated, 38mm diameter  Mirror, Articulated, 65mm diameter  Mirror, Articulated, 65 x 115mm  Lamp Holder, Fits Handle and Accessories Lamp (kit case not supplied)

Magnifiers

Velcro Tapes

P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A 317.00

Other kits available on application Fibre Optic Torch, light guide 2mm diameter x 185mm length Description Magnifier 10 x c/w Standard Measuring Graticule Illuminator for above magnifier c/w 2 x ‘C’ cells Other Measuring Graticules are available prices from Headband Magnifier 2.7x. Adjustable band, can be worn over spectacles – raised or lowered for use, leaves both hands free Spare lenses for above 1.8x or 3.5x Hand magnifier, aspheric lens, Bi-focal 2x over 115mm and 5x over 30mm Hand magnifier, aspheric lens, 2.5x (size 95 x 80mm) Hand magnifier, aspheric lens, 2.5x (size 75 x 65mm) Description Sew on Type, 25mm x 25mts Twin Roll (Hook and Loop) Black Sew on Type, 50mm x 25mts Twin Roll (Hook and Loop) Black or White Self Adhesive, 25mm x 25mts Twin Roll (Hook and Loop) Black Self Adhesive, 50mm x 25mts Twin Roll (Hook and Loop) Black or White.

Head Band Magnifier

5.50 9.50 7.95

39.00 Price (£) 88.95 22.78 13.80 55.39 22.00 40.58 32.15 25.20 Price (£) 26.25 36.75 36.75 53.55

Fibre optic Torch

Inspection Probes and Mirrors

www.ndtes.co.uk

Page 25 Back to contents page

[email protected]

NDT EQUIPMENT SUPPLIES LTD ARE AN OFFICIAL DISTRIBUTOR OF MAGNAFLUX PRODUCTS

Zyglo Water Washable Fluorescent Penetrants Part No Model 056C061 ZL-15B Level ½ 056C062 ZL-15B Level ½ 056C185 ZL-19 Level 1 056C186 ZL-19 Level 1 056C205 ZL-60C Level 2 056C206 ZL-60C Level 2 008A008 ZL-60C Level 2 056C010 ZL-60D Level 2 056C011 ZL-60D Level 2 056C034 ZL-67B Level 3 056C035 ZL-67B Level 3 056C201 ZL-56 Level 4 Post Emulsifiable Fluorescent Penetrants

Description 25 Lt 200 Lt 25 Lt 200 Lt 25 Lt 200 Lt 10 x 400ml Aerosol 25Lt 200Lt 25Lt 200Lt 25Lt

Part No 056C079 056C080 066C017 066C016 008A002 066C020 066C019

Model ZL-2C Level 2 ZL-2C Level 2 ZL-27A Level 3 ZL-27A Level 3 ZL-27A Level 3 ZL-37 Level 4 ZL-37 Level 4

Description 25Lt 200Lt 25Lt 200Lt 10 x 400ml Aerosol 25Lt 200Lt

Part No 065C002 065C003 065C025

ZR-10C ZR-10C ZE-4B

Part No 055C022 055C023 055C002 008A010 055C010

ZP-4B ZP-4B ZP-5B ZP-9F ZP14A

Part No 007E025

Model ZA 43 Kit

www.ndtes.co.uk

Model

Description 25Lt 200Lt 25Lt Emulsifier

Model

Description 1Kg Dry Powder 5Kg 5Kg Water Suspendible 10 x 400ml Aerosol Solvent Based 5Kg Water Soluble

Price

Description Carry Case Containing: 2 x Aerosol SKC-S Cleaner 1 x Aerosol ZL-60C Penetrant 1 x Aerosol ZP-9F Developer 1 x Container ZP-4B Dry Developer 1 x ZB100F Hand Held U.V.(A) Light 1 x Wire Brush 2 x Cloths

Page 26 Back to contents page

[email protected]

MAGNETIC PARTICLES

Part Number 059C025 059C026 057C036 Part Number 058C033 058C041 058C042 Part Number 058C006 058C007 008A105 058C016 008A106 Part Number

Wet Method Fluorescent Particles Model Description 14A 1Kg 14A 5Kg MG410 1Kg Water Suspendible Fluorescent Particles Model Description WB12 6x1Lt Bottle (1 litre makes 50 litres ) WB655 6x1Lt Bottle (1 litre makes 50 litres ) WB655 4 x 5 litre Bottle Ready To Use MPI Ink (Fluorescent) Model Description 14HF 4 x 5 Lt 14HF 25Lt 14HF 10 x 400ml 410HF 25Lt 410HF 10 x 400ml Oil Based Carrier For MPI Model

Price

Description

058C024 058C028

Carrier II 25Lt Carrier II 200Lt Wayer Based Black Magnetic Ink Concentrate - MAGNAVIS Part Number Model Description 058C036 Part Number 058C001 008A103 Part Number 064C002 Part Number 055C027 008A009 Part Number 057C004 057C008 057C066

www.ndtes.co.uk

WB27

6x1Lt Bottle (1 litre makes 50 litres )

Ready To Use MPI Ink Model Description 7HF 4 x 5Lt 7HF 10 x 400ml Aerosols Water Vehicle Conditioners Model Description WA-1 1Lt White Contrast Paint Model Description WCP-2 4 x 5Lt WCP-2 10 x 400ml Aerosol Dry Magnetic Powders Model Description No.1 Grey 1kg 3A Black 1kg 8A Red 1kg

Page 27 Back to contents page

[email protected]

WET HORIZONTAL MAGNETIC PARTICLE INSPECTION UNITS Portable Magnetic Equipment Part Number 001Y005 001M008 008C020 001Y025 001Y022 001Y004

Model YM5 PM68 L-10 Y1 Y6 Y6

Description Permanent Magnet Yoke Horse Shoe Magnet Magnetising Coil 110v only 50Hz Electro-Magnet 230v, 50Hz Electro-Magnet 50v, 50Hz Electro-Magnet 110v, 50Hz

001Y020 Y6 005K001 YM5/Y6/Y7 Kit Portable Power Packs 007E005 P920 027T002 001C090

P920

Mobile Power Packs 007E218 MAG 50/3H/M

Price POA

Electro-Magnet 230v, 50Hz Carry Case & Aerosols (No Yoke) 1500 Amp AC/HWDC 220/240v Trolley Unit for Portable Power Pack P920 Standard prod set with switch & 4.5m cable eitherend 3000 Amp AC/HWDC 380/415v

007E219 MAG 50/5H/M 5000 Amp AC/HWDC 380/415v Demagnetisers Full Range of Magnaflux Products Available, Prices and Specifications Available On Request

Portable Power Pack

Permanent Magnet

www.ndtes.co.uk

Y7 Series Yoke Electro Magnet

Y6 Series Yoke

Page 28 Back to contents page

Air / Water Gun

[email protected]

U.V.(A) [BLACK] LIGHTS AND METERS UV(A) Light System D1 Part No

Model

032B023

ZB100F

032B023A

ZB100F

032B038 032B037

ZB 250F ZB 400F

032B039

ZB 100LED

032B040 ZB 100LED UV(A) Light Bulbs Part No Model 002L075 ZB100F 002L134

ZB135XHID

Description

Price

Fan Cooled Hand Held 100w UV Light with Control Unit 110, 220 or 240v, 50Hz Fan Cooled Hand Held 100w UV Light with Control Unit 110, 220 or 240v, 60Hz Fan Cooled Hand Held 250w Flood UV Light & Control Unit Suspendible UV(A) Light 400w 230v, 50Hz LED UV Light with Mains Power Unit LED UV Light with Battery Pack and Charger Description 100w Medium Base Bulb (ZB100F) Replacement Bulb (UV270 & ZB35BP

002L142 ZB250F Replacement Bulb 002L143 ZB400F Replacement Bulb Filters Part No Model Description 008F012 Smooth Filter Glass for 100w Lamps UV(A) Light Spares Part No Model Description 003F021 ZB100F Cooling Fan for ZB100F 005V004 Voltage Selector Only for Control Units (No Fuse Holder) 600063 ZB100F Medium Base Replacement Socket for ZB100F (511870) 600036 ZB100F Bezel 600064 ZB100F Bezel Clips (Set) 074C126 Thermal Switch, 3 amp (ZB100F Units, from October 1996) Control Units Part No Model Description 001T257 ZB100F Replacement Transformer for ZB100F, 60Hz 001T251 ZB100F Replacement Transformer for ZB100F, 50Hz 001T250 ZB100F Replacement Choke Other UV(A) Light Accessories Part No Model Description 023A008 Adjustable Fixture for 100w Hand Lamp (Unit Mounting) 023A008B Adjustable Fixture for 100w Hand Lamp (Bench Mounting) 004L032 Strip Light 2ft Double 36 Watt 004L033 Strip Light 4ft Double 72 Watt

www.ndtes.co.uk

Page 29 Back to contents page

[email protected]

WET HORIZONTAL MAGNETIC PARTICLE INSPECTION UNITS Magnetic Particle Inspection Equipment Part Number Model Description 007E045

007E241

007E243

007E224

MAG 20

220 / 240v 50Hz Power Supply Component Length 550mm 1000 Amp A.C (RMS) Power Output

MAG 40 HD

380 / 415v 50Hz Power Supply Component Length 1000mm 2500 Amp A.C. (RMS) Power Output 2500 Amp H.W.D.C. (MEGAMPS) Power Output

MAG 40 HFD*

380 / 415v 50Hz Power Supply 20,000 Ampere – Turns Magnetic Flow Component Length 1000mm 2500 Amp A.C. (RMS) Power Output 2500 Amp H.W.D.C. (MAGAMPS) Power Output

MAG 50/3H/15

380 / 415v 50Hz Power Supply Component Length 1.5mtr 3000 Amp AC (RMS) Power Output 3000 Amp HWDC (MAGAMPS) Power Output

007E225 MAG 50/3H/20 007E226 MAG 50/3H/25 Optional coil sizes available 007E228

Price

MAG 50/5H/15

007E229 MAG 50/5H/20 007E230 MAG 50/5H/25 Optional coil sizes available

As Above, Component Length 2.0 metres As Above, Component Length 2.5 metres 380/415v Power Supply Component Length 1.5 metres 5000 Amp AC (RMS) Power Output 5000 Amp HWDC (MAGAMPS) Power Output As Above, Component Length 2.0 metres As Above, Component Length 2.5 metres

007E236

MAG 50/6FR/15

380/415v 3 Phase 50 Hz Power Supply Component Length 1.5 metres 6000 Amp FWDC Power Output

007E237

MAG 50/6FR/20

As Above, Component Length 2.0 metres

007E238 MAG 50/6FR/25 As Above, Component Length 2.5 metres Optional coil sizes available Full Range of Magnaflux Products Available, Datasheets and Specification Available On Request.

MAG 20 Series

www.ndtes.co.uk

MAG40 Series

Page 30 Back to contents page

MAG50 Series

[email protected]

MAGNETIC PARTICLE ACCESSORIES Magnetic Particle Operating Accessories Part No Model Description 072S006 MAG 50 Series Head / Tailstock ‘V’ Block Part No Model Description 15495A3 MAG 40 Series Head / Tailstock ‘V’ Block Contacts For Wet Horizontal Units Part No Description 031C003 Double Braided Contact Pad with Neoprene 031C020 Contact Pad MAG 50 Series (Earlier models need 072S006) 031C016 Contact Pad MAG 40 Series (All Versions) 031C014 Contact Pad MAG III 031C010 Contact Pad MAG II & MAG II H 031C012 Contact Pad MAG II F & MAG II HF 20245A2 Lead Contact Plate MAG 50 031C005 Lead Contact Plate (DR,DRC,TACH,TAEH,TAQ & H) Series 023A007 Contact Block (Remote Testing Using Power Pack In Unit) Other Operating Accessories Part No Description 028T002 Central Conductor 12mm dia. X 300mm 028T004 Central Conductor 25mm dia. X 600mm 004G006 Magnaglo Applicator for ½” bore hose Coils Part No Description 008C033 150mm dia. Coil only – Mag 20 & Mag 40 Series Only Product Set & Assemblies Part No Description 001C090 Standard Prod Set with Switch & 4.5m Cable (Eitherend) 001C164 Standard Prod Set with Switch & 4.5m Cable (LUG) 001C162 Standard Prod Set with Switch & Double 3.75m Cable (Lug) 025T008 Replacement Mild Steel Tips 038P003 Replacement Prod Stem 015S178 Replacement Switch Contact Clamps Part No Description 023C002 Spring Loaded Contact Clamp Cables and Connectors Part No Description 001C163 3.75m Cable (Lug Both Sides) 001C165 4.5m Cable (Lug Both Sides) 001C166 7.5m Cable (Lug Both Sides) 001C167 9.0m Cable (Lug Both Sides) 001C020 Cable Only (Per Metre) Other Cable Lengths and Connector Combinations

www.ndtes.co.uk

Page 31 Back to contents page

Price

[email protected]

MAGNETIC PARTICLE ACCESSORIES Cables Connectors Part No Model Description 1238 108mm2 Eitherend Connector 1574 Eitherend Lug Adapter 108mm2 1576 Eitherend Lug Adapter, 90 degree, 108mm2 15027A3 Eitherend Lug with Stud Control Cable Part No Model Description 001C057 Remote Control Lead with Hand Button Other Operating Accessories Part No Model Description Split Coil, 300mm Diameter. 108mm2 Cable with 008C039 Eitherend Split Coil, 630mm Diameter. 108mm2 Cable with 008C042 Eitherend Wet Particle Bath Sprayers Part No Model Description 004G004 Magnaglo Hand Sprayer (Polyspray) Dry Powder Blowers Part No Model Description 008D003 Powder Spray Bulb (Dispenser) Test Pieces With Artificial Defects Part No Model Description 519630 KSC 230 Std QQI Model, Flaw Depth 30% of Shim Thickness Std QQI Model, Flaw Depth 30% of Shim Thickness 519631 KSC4-230 4 Circles Per Sheet Variable Depth QQI Model, Flaws 20%, 30%, 40% of 519632 KSCT-234 Shim Thickness 008M004 TYPE G Magnetic Indicator Strips (G) General (5 Pack) 008M005

TYPE A

Magnetic Indicator Strips (A) Aerospace (5 Pack)

026T001

TEST PIECE

Current Flow 0-1000Amp (BS 6072 & RPS 700)

026T003

TEST PIECE

Current Flow 1000-3000Amp (RPS 700)

026T004

TEST PIECE

Current Flow 3000-5000Amp (RPS 700)

026T002

TEST PIECE

Magnetic Flow / Coil (RPS 700)

026T041

TEST PIECE

Magnetic Flow / Coil (BS 6072)

026T006

TAM 150537

Continuous Method Test Block (75130)

026T005

TEST PIECE

Ketos Steel Test Ring (159999)

189838

TEST PIECE

Magnetic Particle Test Bar (MIL STD)

Price

Centrifuge Tubes & MPI Publications Part No 020B001

Model

www.ndtes.co.uk

Description Book – ‘Principles of MPI Testing’

Page 32 Back to contents page

[email protected]

PENETRANT SYSTEMS Part No

Description

Price

008Z030 008Z031 008Z032

Penetrant / Emulsifier Tank Removable Lid Drain Tray & Grille

008Z033 023A020 023A021 023A022 008Z034 050P001

Wash Tank Water Wash Only Gun, Regulator & Gauge Air / Water Wash Gun, Regulators & Gauges Air / Water Wash Gun, Regulators & Gauges Calibrated to R.P.S 702 Splash Shield UV(A) Light Post Inc. 400W Light

008Z035 008Z036 008Z037 008Z038 008Z039 Part No

Drier Top Loading Must Be Purchased with Developer Developer Top Loading, Must Be Purchased with Drier Inspection Booth c/w ZB100F UV(A) Light Base Tank Grille Clip On Half Grille Description

008Z021 008Z029 008Z023

Penetrant / Emulsifier Tank Removable Lid Drain Tray & Grille

008Z024

Wash Tank

023A020

Water Wash Only Gun, Regulator & Gauge

023A021

Air / Water Wash Gun, Regulators & Gauges

023A022

Air / Water Wash Gun, Regulators & Gauges Calibrated to R.P.S. 702

023A025

Splash Shield

050P001 008Z026 008Z004 008Z005

UV(A) Light Post Inc. 400W Light Drier Top Loading** Developer Top Loading Non Extract Developer Top Loading With Extract

008Z011 15468A2

Inspection Booth c/w ZB100F UV(A) Light Base Tank Grille

008Z039 Part No

Clip On Half Grille

007Z100 007Z101 007Z102 007Z103 007Z105 007Z107 050P001

Penetrant or Emulsifier Station Hinged Cover Aluminium Base Grille Drain – Straight Section, Stainless Steel Rollers Rinse Station Hood with UV(A) Strip Light UV(A) Light Post Inc. 400W Light

023A020 023A021 023A022 007Z106

Water Wash Only Gun, Regulator & Gauge Air / Water Wash Gun, Regulators & Gauges Air / Water Wash Gun, Regulators & Gauges Calibrated to R.P.S. 702 Splash Shield

007Z108 007Z111 007Z112

Drier – Top Loading with Pneumatic Lift Lid Dry Developer Storm Cabinet – Top Load with Pneumatic Lift Lid Inspection Booth c/w ZB100F UV(A) light, white light and Vent Axia Split Roof & Table

Description

www.ndtes.co.uk

Page 33 Back to contents page

[email protected]

PENETRANT SYSTEMS Spraying Equipment Part Number

Model

Description

017S002 018P030

VECTOR R90 PPL1201 81-2300 OPTIFLEX B 20L

Electrostatic Penetrant Spray Electrostatic Drum Pump Unit (25Ltr) Electrostatic Drum Pump Unit (200Ltr) Electrostatic Dry Developer Spray Hydrophilic Remover Foam Applicator (20Ltr)

50L

Hydrophilic Remover Foam Applicator (50Ltr)

Price POA

FILTRATION SYSTEMS Carbon Filter Units Part Number Model 009Z001*

S500

009Z002*

S500C

009Z013

Consumables Part Number 079C002 015F004 015F029

S200

Model

S200

www.ndtes.co.uk

Description Capacity (Nominal) Up To 500Ltr Per Hour Transfer Pump 220/240v, 1 Phase, 50Hz Controls: Motor Starters Float Switches Capacity (Nominal) Up To 500Ltr Per Hour Coalescer For Pre-Rinse Oil Separation Transfer Pump 220/240v, 1 Phase, 50Hz Controls: Motor Starters Float Switches

Price

Pump Stop / Starter Float Switch, (Preventing the pump from running dry) 200 litre maximum tank capacity Re-circulating Pump 200 litre Carbon Drum

Description Activated Carbon Granules (25Kg Bag) Replacement Coalescer Cartridge Replacement 200 litre Carbon Drum

Page 34 Back to contents page

[email protected]

SPOTCHECK Spotcheck Visible Dye Penetrant Part No Model 055C076 SKL-SP2 008A016 SKL-SP2 055C071 SKL-WP2 055C072 SKL-WP2 055C073 SKL-WP2 008A163 SKL-WP2 055C081 SKL-LT Developers Part No Model 055C014 SKD-S2 008A007 SKD-S2 Cleaners / Removers Part No Model 054C007 SKC-S 054C008 SKC-S 008A100 SKC-S Kits Part No Model 008A038 SK 3 Kit

Description 4 x 5Lt Solvent Removable 10 x 400ml Aerosol 4 x 5ml Water Washable 25Lt 200L 10 x 400ml Aerosol 4 x 5L Low Temperature

Price

Description 4 x 5Lt Solvent Based 10 x 400ml Aerosol Description 4 x 5Lt Solvent Based 25Lt 10 x 400 Aerosol

Description Soft Carry Case Containing: 3 x Aerosol SKC-S Cleaner 2 x Aerosol SKL-SP1 Penetrant 3 x Aerosol SKD-S2 Developer 1 x Cloth 053C008 SK 3 Kit Shoulder Carry Case (Soft) AutoGlo (Water Based, Water Washable Fluorescent Penetrant) Part No Model Description 056C224 AL-4B 25Lt 056C225 AL-4B 200Lt 056C226 AL-4B 1000Lt

www.ndtes.co.uk

Page 35 Back to contents page

[email protected]

MPI – MAGNETS, YOKES, WEIGHTS Magnetic Particle Inspection Permanent Magnets Medium Size Horse Shoe Magnet (Without Wheels) RPNSA Large Size Horse Shoe Magnet (Without Wheels) RPNSL ELYMAG 1 Magnet with Hinged Legs and Adjustable Pole Pieces Fleximag, Magnet with Flexible Handles to allow 360 degree Inspection Polymag, Encapsulated Horse Shoe Magnet Electro Magnetic Yokes Adjustable Yoke 110 volt AC (NDT Supply)

Price (£) 190.00 170.00 295.00 215.00 335.00 Price (£) 420.00

Adjustable Yoke 240 volt AC (NDT Supply) Spare Switch Assembly (NDT Supply) Induction Light for above Electromagnets

420.00 49.00 85.00

MAT 230 Adjustable Yoke 240 volt AC

525.00

MAT 42 Adjustable Yoke 42 volt MAT U/V Induction LED lamp MAT White Light Induction LED Lamp Carry Case (Canvas)

525.00 415.00 315.00 22.00

Magnet Test Weights 4.5 kg Electromagnet Test Weight c/w Certificate 18 kg Permanent Magnet Test Weight c/w Certificate Other size Test Weights to customer specification

POLYMAG

MAT230 with UV Induction Lamp

Price (£) 115.00 135.00 POA

ELYMAG 1

MAT W / L

FLEXIMAG

www.ndtes.co.uk

MAT U / V

ELECTRO MAGNETIC

Page 36

[email protected]

Back to contents page

MAGNETIC PARTICLE - ACCESSORIES Accessories and Spares Description

Price (£)

Surecheck Indicators Type I (Brass) General Surecheck Indicators Type II (Silver) Aerospace Flux Indicators Type 4 Berthold Penetrameter A.S.M.E Indicator Centrifuge Tube (ASTM-D96) Pear Shaped Centrifuge Tube Stand for Centrifuge Tube KETOS Steel Test Ring M.T.U Test Piece TP1A Wheel and Bar Test Piece (0-1000 AMPS) TP2A Test Piece (1000-3000 AMPS) TP3A Test Piece (3000-5000 AMPS) TP4 Test Piece (5 Hole) TP5 Test Piece (Magnetic Flow/Coil) Dry Powder Dispenser (Puffer) 1 Litre Magnetic Ink Spray Bottles (Brass Fittings)

Can Gun

Powder Dispenser

Ketos Ring

www.ndtes.co.uk

68.10 68.10 P.O.A 310.00 200.00 68.43 64.00 25.00 450.00 440.00 195.00 354.00 588.00 185.00 160.00 47.00 30.45

Test Pieces

Centrifuge Tubes

Page 37 Back to contents page

[email protected]

MAGNETIC PARTICLE INSPECTION Ultra Violet Lamps B-100AP UV Lamp, 240 volt UV-LED Lamp, UV intensity approx. 6000µW/cm² on a distance of 750mm H44GS Spot Lamp 100w ES Fitting CFL 100F Dual Voltage Ultra Violet Lamp CFL 100F Dual Voltage Ultra Violet Lamp c/w Adjustable Arm Accessories and Spares Spare Bulb for EFL 400F Lamp Spare Bulb for B-100AP (Part Number: 34-0054-01) Pear Shaped Lamp HPW 125w ES Fitting or 3 Pin Bayonet Fitting Spare Glass Filter for CFL100F Lamp B006 Spare Filter/Bezel for B-100AP Spare Finger Guard for B-100AP Spare Lamp Visor for B-100AP UVA Absorbing Spectacles Flux Indicators Surecheck Indicators Type 1 (Brass) General Surecheck Indicators Type 2 (Silver) Aerospace Flux Indicator Type 4 Berthold Penetrameter A.S.M.E. Indicator Magnetometers/Field Indicators Model 25 – Magnetometer (calibrated) (20+0-20) Magnetometer (calibrated) (20+0-20) Pocket version

Price (£) P.O.A P.O.A 85.75 635.00 730.00 Price (£) 90.00 55.00 52.00 52.65 P.O.A P.O.A P.O.A 25.00 Price (£) 68.10 68.10 P.O.A 310.00 195.00 Price (£) 193.40 80.00

UV Torch

UV Absorbing Spectacles

ASME Field Indicator

www.ndtes.co.uk

Pocket Version

CFL 100F Ultraviolet Lamp with Adjustable Arm Attachment

Calibrated Field Indicator

Berthold Penetrameter

CFL 100F Ultraviolet Lamp

Page 38 Back to contents page

Field Indicators

[email protected]

MAGNETIC PARTICLE INSPECTION - CHEMICALS

Chemetall Magnetic Inks Supramor 4B Ready to use Black Magnetic Ink 10 x 400 ml & 25 Ltr Supramor 4B Black Liquid Magnetic Ink, 4x 5ltr Remover Remover S76 10 x 400ml

Aerosol (10) Price (£) 65.52

67.60

Remover S76 x 25Ltr Inks Lumor J 10 X 400ml Aerosol (10 per box) Lumor J Powder 4x1kg Lumor - J (HF) 25ltr Lumor J (W) Powder 4 x 5kg Contrast Paints WCP712 10 x 400ml WCP712 Brushing Paint 4 x 5L Dry Method MPI Ferromor ND8 Yellow Magnetic Powder 4x5kg Accessories Powder Applicator (Puffer) Full Chemetall Chemical range available. Details on request Johnson & Allen Magnetic Crack Detection NEOCOL B Magnetic Ink, Black NEOASTRA F Magnetic Ink, Fluorescent NEOASTRA DG Magnetic Ink, Fluorescent NEOPAINT NPT16 Contrast Paint, White NEOPAINT 2 Contrast Paint, White NEOINDUS 1 ES Contrast Paint Remover ECO-2 Contrast Paint, White, Water Based

www.ndtes.co.uk

Page 39 Back to contents page

Bulk Price (£) 166.40 192.40

197.60 Bulk (£) 67.60 618.80 218.40 652.08 Bulk 72.80 228.80 1 Kilo

Price (£) Aerosol (10) 60.00 60.00 62.50 62.00 67.00 56.00 N/A

5 kilo 364.00 Price (£) 47.00 Price (£) Bulk (5lt) 29.25 29.25 31.00 42.50 42.50 32.25 42.50

[email protected]

DYE PENETRANT - CHEMICALS

Dye Penetrant Chemicals Penetrants Checkmor 240 25 Ltr Checkmor 240 Aerosol 10x400ml Checkmor 240 4x5ltr Removers/Cleaner Remover H92 25Ltr Remover/Cleaner S76 10x400ml Remover/Cleaner S76 25Ltr Developers LD7 Aerosol 10x400ml LD7 4x5Ltr

Aerosol (10) Price (£)

4 x 5 Ltr Price (£)

Britemor 4455 10x400ml Aerosols Britemor 4455 4x5ltr Britemor 4455 25ltr & 200ltr Britemor 446 25ltr & 200ltr Britemor 746 W 25ltr Britemor 755 25ltr & 200ltr Britemor 760 25ltr Britemor 768 25ltr & 200ltr Water Dispersible Developer Available

Bulk (200Ltr) Price (£)

Bulk (25Ltr) 301.60

Bulk (200Ltr)

78.00 286.00 Aerosol (10)

4 x 5 Ltr

67.60 Aerosol (10) 83.20

4 x 5 Ltr

1197.60 Bulk (25Ltr)

Bulk (200Ltr)

202.80

PD3 1kg & 10kg Fluorescent Penetrant Inspection

Bulk (25Ltr) Price (£) 327.60

1KG 41.60 Aerosol (10) 88.40

4 x 5 Ltr

Bulk (25Ltr)

10KG 374.40 Bulk (200Ltr)

291.20 310.00 457.60 525.20 338.00 416.00 494.00

2392.00 3244.80 2600.00 3640.00

A full range of Chemetall products available, data sheets and prices on request

www.ndtes.co.uk

Page 40 Back to contents page

[email protected]

DYE PENETRANT – CHEMICALS / TEST EQUIPMENT

Johnson & Allen Neopen Penetrant Range

Aerosol (10)

Bulk (5lt)

JAP JAP-WW

Red Dye Penetrant, Solvent Removable Red Dye Penetrant, Water Washable

71.00 75.50

44.50 55.25

NEON-WW

Fluorescent Penetrant, Water Washable

88.00

61.75

66.00 66.00

34.50 36.50

69.50 70.50

38.50

Neopen Cleaner/Remover Range JAC-2 Cleaner/Remover JAC-3 Neopen Developer Range JAD Developer, Sulphur/Halogen Free JAD-2 Developer, Sulphur/Halogen Free Dye Penetrant Test Equipment Aluminium Thermal Quench Block PSM 5, TAM 146040 Panel Refractometer, Range 0-30% Can Gun for Aerosols SGE 17 Air Water Spray Gun

Price (£) 66.00 POA 264.00 P.O.A 147.00

Apply Penetrant & Allow Contact Time Rinse off Excess Penetrant Apply Emulsifier Apply Remover Allow Contact

Solvent Wipe

Water Wash

Allow To Dry

Allow To Dry

Apply Developer

Apply Developer

Allow Contact Time

Time Water Wash

Water Wash

Dry Dry Apply

Developer Apply

Developer

Record Results Allow Contact Time & Inspect

www.ndtes.co.uk

Page 41 Back to contents page

[email protected]

Calibration Blocks ORDER CODE

SHAPE (Not to Scale)

No. 1

TYPE

EUROPEAN STANDARD

V1

A2

ISO & EUROPEAN STANDARD

No. 2

DESCRIPTION/ APPLICATION No. 1 Calibration Standard Calibration of shear and compression wave probes. Checking beam angle, emergent point and resolution. Calibration of time base and gain settings. 3mm target hole

V1 Calibration Standard Calibration of shear and compression wave probes. Checking beam angle, emergent point and resolution. Calibration of time base and gain settings. 1.5mm target hole

STANDARD MADE TO

EN ISO 2400 2012 Tolerance +/0.1mm EN12223 2000 BS2704 Tolerance +/- 0.1mm

No. 2 Calibration Standard Small calibration block for site checking of shear wave probes, time bases and gain settings. 5mm target hole.

EN ISO 7963 2010 Tolerance +/- 0.1mm

V2

A4

V2 Calibration Standard Small calibration block for site checking of shear wave probes, time bases and gain settings. 1.5mm target hole.

BS2704 Tolerance +/0.1mm

MATERIAL/ SIZE STEEL 25mm X 100mm X 300mm 5.2 kg (Optional 50mm thickness)

10.4 kg STEEL 25mm X 100mm X 300mm 5.6 kg (Optional 50mm thickness)

10.8 kg STEEL 12.5mm X 43mm X 75mm 0.22 kg (Optional 20mm thickness)

0.35 kg STEEL 12.5mm X 43mm X 75mm 0.22 kg (Optional 20mm thickness)

0.35 kg

BCB BCB-N

A5

Beam Calibration Block Beam profile and resolution checks for shear wave probes. Sensitivity checks for shear and compression probes. 9 off 1.5mm diameter holes BCB-N contains four additional 1.5mm diameter holes Evaluating dominant frequency, pulse length, dead zone and resolution power

A6

A6

for shear and compression probes

BS2704 Tolerance +/0.1mm

BS2704 Tolerance +/- 0.1mm

STEEL 50mm X 75mm X 305mm 9 kg

STEEL 25mm X 50mm X 150mm 1.5 kg

SPECIAL CALIBRATION BLOCKS

Stepped Bar Samples

ASTM Area Amplitude

Rail Testing Blocks

FULL MACHINING OF BLOCKS TO CUSTOMER REQUIREMENTS—FROM 2gm TO 45KG   

Calibration Block material is ultrasonically tested before use. Rough machined samples are heat treated and checked for acoustic characteristics. Special purpose blocks manufactured to order.

Page 42 Back to contents page

Calibration Blocks ORDER CODE

SHAPE (Not to Scale)

TYPE

A7

RTB

DESCRIPTION/ APPLICATION Checking shear wave probe resolution. Steps of 2,3,4 and 5mm

Metric Universal Block For general purpose checking as No. 1 block

MU

SPECIAL

TBR 2 125

SPECIAL

Radiused Test Block For calibration of boiler probes. Available with 3 or 5 x 1.5mm diameter holes

SPECIAL

Ladder Step Wedge For time based calibration with thickness measuring compression probes. 8 steps from 1mm to 8mm. Plus thickness step of 15mm and notch at 20mm depth.

LSW

LSW/M

SPECIAL

CSW

SPECIAL

ASME (Specify Thickness)

DAC (Specify Thickness)

ASME

SPECIAL

Generally as LSW with 25mm diameter steel inserts mounted in plastic. 8 steps from 1mm to 8mm. Also available in other step sizes

Curved Step Wedge For time based calibration of thickness measuring probes. 5 steps—2,4,6,8 and 10mm

STANDARD MADE TO

MATERIAL/ SIZE

BS2704 Tolerance +/- 0.1mm

STEEL 74mm radius 74mm thick 4 kg

Tolerance +/- 0.1mm

Tolerance +/- 0.1mm

Tolerance +/- 0.1mm

Tolerance +/- 0.1mm

Tolerance +/- 0.1mm

Setting sensitivity levels for weld testing. Sizes and locations of flaws are dependent on weld thickness. Metric or Imperial

ASME SECTION V

Setting DAC characteristics for shear wave and compression wave probes. Flaws typically 3mm diameter holes at 20%, 40%, 60% and 80% of thickness.

(BS 3923 1986)

Tolerance +/- 0.1mm

Tolerance +/- 0.1mm

STEEL 20mm x 50mm x 155mm 1.15 kg STEEL 25mm x 20mm x 165mm 0.6 kg STEEL 8mm x 15mm x 120mm 0.07 kg

STEEL INSERT Plastic Body 10mm x 20mm x 140mm 0.27 kg STEEL 100mm Long x 300mm I.D Quadrant 0.14 kg STEEL Size dependent on weld thickness STEEL Size dependent on weld thickness

EDDY CURRENT CALIBRATION BLOCKS

Standard Test Block 0.2mm,0.5mm, 1.0mm Deep

Profiled notches in curved samples

Notches in Tubes and Bars Longitudinal and transverse

PRECISION SPARK EROSION AND MACHINING OF NOTCHES AND HOLES   

All blocks supplied with fully traceable certification and optional cases. Most standard blocks are ex stock. Quality assurance

Page 43 Back to contents page

CALIBRATION BLOCKS Price (£)

Ultrasonic – Carbon Steel Unless Stated Otherwise V1 No.1 V1 or No.1 (50) V1 or No1 (SS) V1 or No.1 (Al) V2 (12,5mm) No2 12.5mm V2 (20)

50 RAD ASME ASME ASME DAC ASTM E-127 Rail Blocks

A2 With *Carrying Case and Calibration Certificate (Formerly BS2704) As above to European Standard EN12223 A2 With Calibration Certificate A2 – Stainless Steel – with Carrying Case and Calibration Certificate A2 Aluminium – with Carrying Case and Calibration Certificate A4 1.5mm or 5mm Target with *Case and Calibration Certificate As above to European Standard EN27963 A4 1.5mm or 5mm Target with *Case and Calibration Certificate A4 – Stainless Steel – 1.5mm or 5mm Target, Carrying Case 12.5mm and Calibration Certificate 20mm A4 – Aluminium – 1.5mm or 5mm Target, *Carrying Case 20mm and Calibration Certificate · 12.5mm A5 with* Carrying Case and Calibration Certificate A6 with Calibration Certificate A7 with Calibration Certificate Ladder Step wedge with Leather Case and Calibration Certificate Ladder Step wedge Stainless Steel – With Leather Carrying Case and Calibration Certificate (Please specify material type) Ladder Step wedge Aluminium - With Leather Carrying Case and Calibration Certificate (Please specify material type) 1-8 x 8mm Step Perspex with Steel Inserts with Calibration Certificate 1.5-20 x 6 Step Perspex C/W Steel Inserts and Calibration Certificate 5-50mm x 6 Step Perspex with Carbon Steel Inserts and Calibration Certificate 1-8mm with Leather Case and Calibration Certificate Curved Step wedge with Calibration Certificate (2mm to 10mm) Metric Universal with Calibration Certificate Type CB 87M Leather Wallet for Metric Universal 5 Holes with Calibration Certificate ESI with * Carrying Case and Calibration Certificate ESI with * Carrying Case and Calibration Certificate ESI Extra 4 x 1.5mm Target Holes with *Carrying Case and Calibration Certificate ESI with Calibration Certificate ASME 0-1” (0-25mm) with Calibration Certificate - Nominal ¾” (19mm) ASME 1-2” (25-50mm) with Calibration Certificate -Nominal 1 ½” (38mm) ASME 2-4” (50-100mm) with Calibration Certificate - Nominal 3” (75mm) BS3923 Price Available on Request – Weld Thickness Required Price Available on Request Please see page 57

Case V1 / N1

Fitted hard plastic carry / site storage case

Case V2 / N2

Fitted hard plastic carry / site storage case 16.00 The manufacture of special purpose test blocks to customer’s own requirements is also undertaken in any type of material. Prices are available on request.

V2 or No2 (SS) V2 or No.2 (Al) BCB (IOW) A6 RTB LSW (1-20) LSW (1-20) (SS) LSW (1-20) (Al) LSW/M LSW LSW Round LSW CSW MU MU – Case TBR 2/125 A5 Blank B A5 Blank C BCB N-A5

Specials

238.00 238.00 590.00 737.00 590.00 86.00 86.00 97.00 295.00 344.00 240.00 226.00 267.00 182.00 267.00 102.00 253.00 186.00 144.00 168.00 267.00 99.00 123.00 216.00 14.00 246.00 236.00 236.00 295.00 223.00 335.00 439.00 839.00 P.O.A P.O.A P.O.A 26.00

Notes .Prices include *Carrying cases where indicated. Note depending on block, these may be either a hard plastic, rugged fabric or leather . The above blocks are the most popular and in many cases can be Ex-Stock. We are pleased to quote for manufacture in free issue material.

www.ndtes.co.uk

Page 44 Back to contents page

[email protected]

CALIBRATION BLOCKS Ultrasonic – USA Specifications - Carbon Steel/Stainless Steel/Aluminium (all Prices On Application) 11W Block type 1 11W Block type 2 ASTM Distance / Amplitude Set ASTM Distance / Area Set ASTM Area / Amplitude Set ASTM Sensitivity / Resolution Set ASTM E317 NAVSHIPS Block AWS DSC AWS DS AWS DC AWS RC AWS SC AWS LSW AWS LSW MAB ROMPAS Block ASME V Block API RP 2X

Similar to Number 1 Block, Contains 25mm Arc Similar to Number 1 Block with 50 & 100mm Radius 19 Blocks 10 Blocks 8 Blocks 10 Blocks 2 Hole & 6 Hole—Resolution & Linearity Distance - Amplitude / Sensitivity Levels Shear wave calibration - Distance & Sensitivity Longitudinal wav calibration - Distance & Sensitivity Shear wave calibration - Distance Shear wave calibration - Resolution Shear wave calibration - Sensitivity 4 Steps - Thickness & Linearity 5 Steps - Thickness & Linearity Miniature Angle Beam Block Range 19mm to 225mm - 6 Blocks Level A & Level C Calibration Blocks Phased array blocks, standards and special materials and prices on request

Eddy Current ( 0.2, 0.5 & 1.0mm slots ) 3 Notch Carbon Steel

0.2mm, 0.5mm, 1.0mm Deep Notches

Price (£) EN1A

119.00

3 Notch Stainless Steel 0.2mm, 0.5mm, 1.0mm Deep Notches 304 or 316 3 Notch Aluminium 0.2mm, 0.5mm, 1.0mm Deep Notches 7075 3 Notch Titanium 0.2mm, 0.5mm, 1.0mm Deep Notches specify grade 3 Notch Magnesium 0.2mm, 0.5mm, 1.0mm Deep Notches AZ310B or pure Weldscan (0.5, 1.0 & 2.0mm slots with lift off spacers to EN1711 )

234.00 152.00 339.00 180.00

3 Notch Carbon Steel

0.5 – 1-2mm Notches 4 x 0.5 Lift off Spacers

EN1A

204.00

3 Notch Stainless Steel

0.5 – 1-2mm Notches 4 x 0.5 Lift off Spacers

304 or 316

258.00

3 Notch Aluminium

0.5 – 1-2mm Notches 4 x 0.5 Lift off Spacers

7075

227.00

3 Notch Titanium

0.5 – 1-2mm Notches 4 x 0.5 Lift off Spacers

Conductivity Standards—IACS

396.00 131.00

Re-calibration

45.00

Conductivity Reference Standards Conduct reference standards with nominal values from 1% IACS to 100% manufactured in a range of materials :- Titanium - Phosphor / Bronze - Lithium - Aluminium - Copper. Certification to National Physics Laboratory and Boeing Standards Quality Assurance Each block is engraved with a unique serial number and fully certified to the requirements of European standards 12223, 7963 (where applicable) British Standards 2704 (1978) together with independent material chemical analysis and certification of heat treatment (grain refining) all of which is fully traceable. Certification as appropriate outside of Europe. A full independent UKAS certification for physical measurements is available, Prices on application Page 45 Back to contents page

ULTRASONIC FLAW DETECTORS Price £ SONATEST:-

D 10 SERIES (Various options and accessories available)

P.O.A

D 20 SERIES (Various options and accessories available)

P.O.A

SITESCAN 123 (Various options and accessories available)

P.O.A

RAILSCAN 125 (Various options and accessories available)

P.O.A

SITESCAN 150 (Various options and accessories available)

P.O.A

SITESCAN 250 (Various options and accessories available)

P.O.A

MASTERSCAN 350 (Various options and accessories available) MASTERSCAN 380 (Various options and accessories available)

P.O.A P.O.A

POWERSCAN 450P (Various options and accessories available)

P.O.A

Veo 16:64 Phased array standard kit (options and accessories additional)

P.O.A

A full range of Sonatest products available, please ask for details GE Inspection Tech:- USM35X ; optional versions available, DAC, TCG AWS etc

P.O.A

All GE products Subject to availability

P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A

DANATRONICS:scan

KARL DEUTSCH:-

USM36X (Various options and accessories available) AWS : DGS : SWP : BWA : 3G : Data Logger : Phantom PRF DAC/JISDAC/CNDAC USM GO USM GO + USN60 (Various options and accessories available) PHASOR XS Portable Phased Array Equipment, --probes extra-Hand-Held Digital Ultrasonic Flaw detector / thickness gage, A;& B

P.O.A (Various options and accessories available) Other models available, prices and specification on request.

P.O.A

ECHOGRAPH 1090

P.O.A

ECHOGRAPH 1094— Portable 8 Channel Multiplex UT System

P.O.A

ECHOMETER 1075 Basic

P.O.A

Training can be offered , please refer to relevant pages in this catalogue

SITESCAN 150

D SERIES

www.ndtes.co.uk

EHC-09DL CW

ECHOGRAPH 1094

USM GO

USM36X Page 46 Back to contents page

P.O.A

MASTERSCAN 380

VEO 16 : 64

[email protected]

ULTRASONIC THICKNESS GAUGES – HARDNESS TESTERS

Ultrasonic, Thickness Gauges

Price (£)

Cygnus 1 - Basic Model Complete Kit With 2.25mhz 13mm Heavy Duty Remote Probe

2,130.00

Cygnus 1 - Intrinsically Safe Model Complete Kit With 2.25mhz 13mm Heavy Duty Probe Cygnus 1 - Underwater Model Complete Kit With 2.25mhz 13mm Uw Remote Probe And Top side read out Cygnus 1 - Underwater Model Complete Kit With 2.25mhz 13mm Uw Remote Probe

2,695.00

Cygnus 2 - Basic Model Complete Kit With 2.25mhz 13mm Remote Probe

1,545.00

Cygnus 3 - With Data Logger Complete Kit With 2.25mhz 13mm Remote Probe

1,995.00

Cygnus 4 - LCD - Basic Model Complete Kit With 2.25mhz 13mm Remote Probe **NEW**

1,545.00

Cygnus R O V units available,

3,855.00 3,255.00

P.O.A

ALL GE products subject to availability GE - DM5E Serries of wall thickness gauge

P.O.A

GE - DMS Go series portable thickness gauge

P.O.A

GE - CL 5 Precision thickness gauge

P.O.A

GE - Pocket Mike Complete With Carry case, Manual, Integral Probe, Battery & Couplant.

P.O.A

Demeq - QH5 D Complete with Type “D” Impact Device, Data Logger , Cable, Coupling Paste, Software, Manual, Carry Case Demeq - QH5 G Complete with Type “G” Impact Device, Data Logger , Cable, Coupling Paste, Software, Manual, Carry Case Demeq - QH5 M Complete with Type “M” Multi-Impact Devices, Data Logger , Cable, Coupling Paste, Software, Manual, Carry Case

CYGNUS 2

Demeq QH5-M

CYGNUS

CL 5

CYGNUS 4

DM5E

Page 47 Back to contents page

DSM GO

P.O.A P.O.A P.O.A

Demeq QH5-D

Demeq QH5-G

ULTRASONIC THICKNESS GAUGES – HARDNESS TESTERS Ultrasonic, Thickness Gauges DANATRONICS:- EHC - 09 Hand-Held Digital Ultrasonic thickness gauge, with various options: - Data logger; B-Scan, Monochrome or colour display; coating rejection; live waveform Complete With Battery, Probe, Cable, Carry Case, Couplant, Manual, Certification. PRICES START FROM A full range of probes of different size and frequencies available, Data sheet / spec on request PosiTector UTG - Complete With Transducer, Couplant, Carry Case, Manual & IR Port Sonatest – B Gage Complete With Transducer, Couplant, Carry Case, Manual

Price (£) 990.00 670.00 594.00

Sonatest - Sonogage IV 699.00 Sonatest - T Gage V series from 810.00 Sonatest - Microgage series from 1085.00 Dakota Mx-1 Complete With Battery, Probe, Cable, Carry Case, Couplant, Manual, Certification. 650.00 Dakota Mx-2 Complete With Battery, Probe, Cable, Carry Case, Couplant, Manual, Certification. 750.00 Dakota Mx-3 Complete With Battery, Probe, Cable, Carry Case, Couplant, Manual, Certification. 995.00 Dakota Mx-5 Complete With Battery, Probe, Cable, Carry Case, Couplant, Manual, Certification. 1,496.00 Dakota Mxv A & B scan ,C/w, Cable, Carry Case, Cert, Manual And Software P.O.A Demeq also available, please contact us for details P.O.A Full Range Of data sheets and Probes Available on the above manufacturers on Request. Hardness Testers Equotip 3 Kit C/W Impact device D, cables & software Equotip Piccolo 2 Kit C/W Impact device, cables, software & test block Equotip Bambino including test block Dynapocket Basic complete Kit prices from (other versions available) From Dynamic – MIC10, Subject to availability Buchholz Indentation Tester Demeq also available, please contact us for details A Full Data Sheet And Specification For Each Of The Above Items Is Available On Request.

B – GAGE

POSITECTOR

EQUOTIP 3

PICCOLO

SONAGAGE IV Page 48

MXV

EHC – 09

5,205.00 3,050.00 2,350.00 P.O.A P.O.A P.O.A P.O.A

Demeq QS3

MX-3 & MX-5

ULTRASONIC PROBES – NDT EQUIPMENT SERVICES NDT – ES - Angle Beam Probes SS Series’ Miniature SS38 – 2 SS45 – 2 SS60 –2 SS70 –2 SS38 – 4 SS45 – 4 SS60 – 4 SS70 – 4 SS38 – 2HP SS45 – 2HP SS60 – 2HP SS70 – 2 HP SS80 – 2HP SS90 – 2HP SS38 – 4HP SS45 – 4HP SS60 – 4HP SS70 – 4HP SS80 – 4HP (Lemo N/A) SS90 – 4HP (Lemo N/A) Lemo connector add L to code XL Series’ - Large XLSS (1MHz)** XLSS38 – 2 XLSS45 – 2 XLSS60 – 2 XLSS70 – 2 XLWS (pack 10) (**state angle) XLSS38;45,60, 70 4MHz Lemo connector add L to code L Series – Medium LSS38 – 2.5 LSS45 – 2.5 LSS60 – 2.5 LSS70 – 2.5 LWS (pack 10) LSS45;60 &70 4MHz SWS 45;60 &70 , 16 X 16mm Twin Angle Beam Probes W Series - Miniature MWT38 – 4 MWT45 – 4 MWT60 – 4 MWT70 – 4

www.ndtes.co.uk

Price (£) 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 74.00 74.00 74.00 74.00 94.00 94.00 74.00 74.00 74.00 74.00 94.00 94.00 4.00 Price (£) 196.00 130.00 130.00 130.00 130.00 33.00 133.00 4.00 Price (£) 106.00 106.00 106.00 106.00 31.00 111.00 136.00 Price (£) 123.00 123.00 123.00 123.00

Standard Series TS38 – 4 TS45 – 4 TS60 – 4 TS70 – 4 Sub Miniature Angle MSS38 – 5 MSS45 – 5 MSS60 – 5 MSS70 – 5 Boiler Tube BTP70 Creep Wave LCW 2 LCW 4 CW 2 CW 4 Angle Compression SAC45 Single Crystal SAC60 Single Crystal SAC70 Single Crystal TAC45 Twin Crystal TAC60 Twin Crystal TAC70 Twin Crystal MTAC45 Twin Crystal MTAC60 Twin Crystal MTAC70 Twin Crystal LTAC45 Twin Crystal LTAC60 Twin Crystal LTAC70 Twin Crystal High Temperature HMWT 45,60 or 70 Degree, Twin HSMTC5-5 Twin 0 Degree HTCSF10 2 or 4MHz Twin 0 Degree HTC20 2.5 or 5MHz Twin 0 Degree HSS45 – 4 Single Crystal HSS60 – 4 Single Crystal HSS70 – 4 Single Crystal HTC10 – 5 Twin Crystal HTC10 – 2.5 Twin Crystal Underwater Probes UWTC10-5 Twin 0 Degree UWTC20-2.5 Twin 0 Degree UWSS45-4 Single UWSS60-4 Single UWSS70-4 Single Page 49

Back to contents page

Price (£) 85.00 85.00 85.00 85.00 Price (£) 136.00 136.00 136.00 136.00 Price (£) 139.00 Price (£) 256.00 256.00 226.00 226.00 Price (£) 186.00 186.00 186.00 256.00 256.00 256.00 221.00 221.00 221.00 256.00 256.00 256.00 Price (£) 198.00 199.00 209.00 231.00 166.00 166.00 166.00 185.00 185.00 Price (£) 196.00 211.00 181.00 181.00 181.00

[email protected]

ULTRASONIC PROBES – NDT EQUIPMENT SERVICES NDT – ES Single Crystal Compression Replacement Membrane Type Price (£) SCSF24 – 1 191.00 SCSF24 – 2 150.00 SCSF24 – 4 150.00 SCSF10 – 2 121.00 SCSF10 – 4 121.00 SCSF10 – 5 121.00 GS45 – (pack of 10) Membrane 19.00 GS24 – (pack of 10) Membrane 19.00

Twin Crystal Compression Replacement Membrane Type TCSF24 – 2 TCSF24 – 4 TCSF10 – 2 TCSF10 – 4 TCSF10 – 5

Standard Series – Round TC20 – 1.25 TC20 – 2.0 Delay Line Price (£) TC20 – 2.5 SCDL 6.5 199.00 TC20 – 5 SCDL 6 –10 266.00 TC15 – 2.5 DL 5 39.00 TC15 – 5 TC10 – 2.5 Ceramic Faced Price (£) TC10 – 4 SCHF20 – 1 176.00 TC10 – 5 SCHF20 – 2 109.00 Lemo 00 add SCHF20 – 4 109.00 Miniature and Special Use SCHF20 – 5 109.00 MTC10 – 5 SCHF10 – 2 99.00 SMTC5 – 5 SCHF10 – 4 99.00 SMTC5 – 10 SCHF10 – 5 99.00 DTC10 – 5 SCHF10 - 10 159.00 TCLP5 – 5 SMSC5 – 5 141.00 Standard Series – Square SMSC5 – 10 166.00 TCE10 – 5 SCLP20 – 2.5 116.00 TCE15 – 5 SCLP20 – 5 116.00 TCE15 – 2.5 SCLP10 – 2.5 116.00 TCE20 – 5 SCLP10 – 4 116.00 TCE20 – 2.5 SCLP10 – 5 116.00 Lemo 00 Connector – Steel Faced Price (£) Wear ring Angle Beam SC20 – 2.5 93.00 W Series – Miniature SC20 – 4 93.00 SC20 – 5 93.00 MWS35 – 2 SC10 – 2.5 89.00 MWS45 – 2 SC10 – 4 89.00 MWS60 – 2 SC10 – 5 89.00 MWS70 - 2 MWS80 – 2 Thickness Meter Probes Price (£) MWS90 – 2 DA10 – 5 186.00 MWS35 – 4 DA20 – 2 246.00 MWS45 – 4 DA5 – 5 226.00 MWS60 – 4 DA10 –5HT 286.00 MWS70 – 4 DA310 – 5 (DA301) 256.00 MWS80 – 4 T-Mike TMP 149.00 MWS90 – 4 TMP-1 comparagage 181.00 Top entry connector Plate Scan Probes TCLP 5-10 (DA312) 259.00 For use on our PlateScan 4 Trolley PT1 4 MHz PT1 2MHz Other manufacturers’ probes are available, code and price on request

www.ndtes.co.uk

Page 50 Back to contents page

Price (£) 155.00 155.00 129.00 129.00 129.00 Price (£) 131.00 83.00 75.00 75.00 73.00 73.00 73.00 73.00 72.00 5.00 Price (£) 143.00 149.00 189.00 156.00 206.00 Price (£) 67.00 69.00 69.00 71.00 71.00 6.00 16.00 Price (£) 92.00 92.00 92.00 92.00 129.00 129.00 92.00 92.00 92.00 92.00 129.00 129.00 4.00 Price (£) 118.00 118.00

[email protected]

ULTRASONIC PROBES – GE (Krautkramer) Miniature Angle Probes S-Series 10mm – 4MHz MAPS38 MAPS45 MAPS60 MAPS70

Price (£) P.O.A

MAPS80 MAPS90 S-Series 10mm – 2 MHz MAPS38 MAPS45

MA45 - 2 MA60 –2 MA70 - 2 Suggested Cables for use with the above Probes Single probe cable Lemo type PC2/ Lemo Single probe cable BNC type PC2/ BNC Focused ESI Approved – 10mm x 5mm 4 MHz Twin Probes TMAPF – S38

AP – B38 AP – B45 AP – B60 AP – B70 Suggested Cables For Use With The Above Probes Single probe cable Lemo type MPKL2

Price (£)

Twin probe cable Lemo type TPC2/Lemo

P.O.A

Alternatively: Twin probe cable BNC type TPC2/BNC Combined Double Probes CD – S-Series ESI Approved 10,15 & 20mm CD-S 10/2.5 CD-S 10/5 CD-S 15/2.5 CD-S 15/5 CD-S 20/1.25 CD-S 20/2.5 CD-S 20/5

MAPS60 MAPS70 MAPS90 MA Series - 10mm - 4 MHz MA45 – 4 MA60 - 4 MA70 - 4 MA Series – 10mm – 2 MHz

Special 2 MHz Large Angle Probes ESI Approved

Price (£) P.O.A

Price (£) P.O.A

S-Series Single Normal Compression Probes – Soft Faced – 10 & 25mm SNS10/5 SNS10/2.5

Price (£) P.O.A

Price (£) P.O.A

Price (£)

SNS25/1.25 Price (£) P.O.A

Spare Replaceable Probes Covers ES45

SNS10/5-H Price (£) P.O.A

Price (£) P.O.A

Single Normal Compression Probes Hard Faced – S-Series – 10 & 25mm

www.ndtes.co.uk

P.O.A

SNS25/2.5

TMAPF – S60

TMAPF– S90 10mm x 5mm - 2 MHz Twin Probes TMAP45 TMAP60 TMAP70

Price (£)

SNS25/5

ES24

TMAP – S80

P.O.A

P.O.A

TMAPF – S45

TMAPF – S70 Non – Focused – 10mm x 5mm 4 MHz Twin Probes

Price (£)

Price (£) P.O.A

SNS10/2.5-H S25/5-HNS SNS25/2.5-H

Price (£)

SNS25/1.25-H

P.O.A

Page 51 Back to contents page

[email protected]

ULTRASONIC PROBES – GE (Krautkramer) Suggested Cables For Use With Price (£) Price (£) Probes with Subvis connectors Cable for single probes to Lemo type P.O.A MWB45-4 P.O.A PC2/Lemo Cable for twin probes to Lemo type MWB60-4 TPC2/Lemo cables are 2m long, other sizes P.O.A. MWB70-4 Cable for single probes to BNC type WB45º ; 60º & 70 º - 2MHz PC2/BNC Cable for twin probes to BNC type WB45º ; 60º & 70 º - 4MHz TPC2/BNC Combined Double Probes – CD – P Price (£) Piezocomposite Series CD-P 10/2 P.O.A SEB 4KF8 CD-P10/4 MB2S-E CD-P10/5 MB4S-E CD-P15/1.25 MSW-QC 2.25MHz 0.5” Diameter CD-P15/2 MSW-QC 5.0MHz 0.5” Diameter CD-P15/5 Wedge 0.5” Diameter 45 Degree CD-P20/1.25 Wedge 0.5” Diameter 60 Degree CD-P20/2 Wedge 0.5” Diameter 70 Degree CD-P20/5 HT Wedge 0.5” Diameter 45 Degree Miniature Angle Probes – 4 MHz – P Price (£) HT Wedge 0.5” Diameter 60 Degree Piezocomposite Series MAPP38 P.O.A HT Wedge 0.5” Diameter 70 Degree Thickness Meter Probes Price (£) MAPP45 MAPP60 DA301 P.O.A MAPP70 DA303 Miniature Angle Probes – 2 MHz Price (£) DA305 Piezocomposite Series MAPP38 P.O.A DA311 MAPP45 DA312 MAPP60 DA319 MAPP70 DA401 Other Probes Price (£) DA403 B2S(E) P.O.A DA412 B4S(E) HT400A B1 S HT400B BO.5 SL CA211A MSEB 2 (E) CLF4 MSEB 4 (E) CLF5 MSEB 5 (E) TC560 Cables For Thickness Meter Probes Price SEB 2 SEB 4 DA231 P.O.A MWB45-2 DA235 MWB60-2 KBA535 (Armoured) HT MWB70-2 KB536 HT Longitudinal Wave Angle probes Price (£) WSY 45-4 Single 10mm, 4 MHz P.O.A VSY 45-4 Twin 5 x 10mm, P.O.A WSY 60-4 Single 10mm, 4 MHz VSY 60-4 Twin 5 x 10mm, WSY 70-4 Single 10mm, 4 MHz VSY 70-4 Twin 5 x 10mm, A Full range of GE Inspection Technology Probes and accessories are available on request

www.ndtes.co.uk

Page 52 Back to contents page

[email protected]

ULTRASONIC PROBES – SONATEST Miniature Angle Probes SA series 10mm – 5MHz Economy version SA5-38 add T top entry add R rear SA5-45 as standard all Probes are SA5-60 with Subvis connectors SA5-70 SA5-80 SA5-90 SA-Series 10mm – 2 MHz SA2-38 add T top entry add R rear SA2-45 SA2-60 SA2-70 SA2-80 SAO Series - 10mm - 4 MHz SAO4-45 add T top entry add R rear SAO4-60 SAO4-70 SA0 Series – 10mm – 2 MHz SAO2-45 add T top entry add R rear SAO2-60 SAO2-70 Other angles available ORION series High specification 4 MHz 10mm Orion 4-38 add T top entry add R rear Orion 4-45 Orion 4-60 Orion 4-70 Orion 4-90 Other angles available ORION series High specification 2 MHz 10mm Orion 2-38 add T top entry add R rear Orion 2-45 Orion 2-60 Orion 2-70 Other angles and frequencies are available price on request Suggested Cables for use with all Single Angle Probes, Single probe cable Lemo 1 type PC-LS For mini Lemo 00 “ add “Z” For Microdot ” add “D” Re-shoes (kit of 10) for angle probe Adhesive for above 5grm bottle

www.ndtes.co.uk

Price £ P.O.A

Price £ P.O.A

Price £ P.O.A

Price £ P.O.A

Price £ P.O.A

Large Angle Probes medium damped, 1;2 & 4MHz LSA 1-45 add T top entry add R rear LSA 1-60 LSA 1-70 LSA 2-45 LSA 2-60 LSA 2-70 LSA 4-45 LSA 4-60 LSA 4-70 HOT work probes 400°C int. 2/4MHz HSA2-45 add T top entry add R rear HSA2-60 HSA2-70 HSA4-45 HSA4-60 HSA4-70 Other angles available Twin Angle Probes CDA series 10mm economy version, 2 & 4 MHz CDA 2-45 CDA 2-60 CDA 2-70 CDA 4-45 CDA 4-60 CDA 4-70

add T top entry add R rear

Suggested Cables for use with all Twin Angle Probes

Price £ P.O.A

Twin probe cable Lemo 1 type TPC-LS For Microdot add “D” For mini Lemo 00 “ add “Z” BNC instrument end available Boiler Tube Inspection probes 5MHZ,60° Twin Angle 5MHZ,70° Twin Angle Other angles available Subvis connectors are standard on all probes unless stated otherwise Underwater cables available please specify length and connector types

Price £ P.O.A

Price £ P.O.A

Price £ P.O.A

Price £ P.O.A

Price £ P.O.A

P.O.A

P.O.A Cable length are 2 metres Additional lengths single cable per metre Additional lengths twin cable per metre

Page 53 Back to contents page

[email protected]

ULTRASONIC PROBES - SONATEST Single Longitudinal probes High damped, ceramic faced, Subvis connector SLH1-25, 1MHz, 25mm Lemo SLH2-10, 2MHz, 10mm SLH2-20, Lemo SLH4-10, 4MHz, SLH4-15, SLH5-10, 5 MHz, SLH5-15, SLH10-5, 10 MHz, 5mm SLH10-10 Other sizes and frequencies available Single Longitudinal probes High damped, low profile, Subvis connector SLP1-20, 1MHz SLP2-10, 2MHz SLP5-5, 5 MHz SLP5-10, SLP10-5, 10 MHz SLP10-10, Other sizes and frequencies available Single Longitudinal probes High damped economy, Subvis connector SLG2-10 SLG4-10 SLG5-10 SLG10-10 SLG4-20 Single Longitudinal probes Low damped economy, Subvis connector SLC1-20 SLC2-10 SLC2-15 SLC2-20 SLC2-25 SLC4-10 SLC4-20 SLC5-10 LARGE LOW FREQUENCY – SINGLE LONGITUDINAL, Lemo 1 connectors LLFO.5-34; 0.5MHZ, 34mm LLF1-34, 1MHZ, 34mm LLF2-30, 2MHZ, 30mm Other sizes and frequencies available Single Longitudinal probes medium damped , Subvis connector SLM1-25 Lemo SLM2-10 SLM2-20 Lemo SLM4.10 SLM5-10 SLM5-15 SLM10-10

www.ndtes.co.uk

Price £ P.O.A

Single Longitudinal probes protective membrane Subvis connector SLF1-25 * SLF2-10 SLF2-20 * SLF4-10 SLF4-20 * SLF5-10 SLF5-15 SLF5-20 L SLF5-25 L * For Lemo1 connector add “L”

Price £ P.O.A

Twin Compression probes, medium damped, Subvis connector P.O.A

P.O.A

P.O.A

P.O.A

P.O.A

CD1-15 CD1-20 CD2-10 CD2-15 CD2-20 CD4-10 CD5-10 CD5-15 CD5-20 Twin Compression probes, High temperature, Subvis connector 400° int. CD2-10HT CD2-15HT CD2-20HT CD4-10HT CD5-10HT CD5-15HT Twin Compression probes, , Subvis connector, Plastic flared skirt GEM2-10 GEM4-10 GEM5-10 GEM5-10(F) short-focussed GEM2-10High Temp version GEM5-10High Temp version For mini Lemo add “Z” For Microdot add “D” Twin Compression probes protective membrane Subvis connector CDF1-25 CDF2-10 CDF2-20 CDF2-25 CDF4-10 CDF4-20 CDF5-10 CDF5-25 D5-5 Low profile with integral cable D5-10 Low profile with integral cable

Page 54 Back to contents page

P.O.A

P.O.A

P.O.A

P.O.A

[email protected]

TRANSDUCERS - PHOENIX High Temperature & Harsh Environment Transducers Subvis Price

Lemo 00 Price (£)

215.00

225.00

GSW 2/38, 45, 60, 70

130.00

215.00 215.00 Lemo No. 1 Only

225.00 225.00

GSW 4/38, 45, 60, 70 GSW 4/70 Forward Emission 7mm

130.00 140.00

280.00

GTW 2/38, 45, 60, 70

180.00

BNC Only

280.00

GTW 2/38, 45, 60, 70

180.00

210.00 210.00 -

220.00 220.00 POA

Shear Wave Transducers – Twin Crystal Part Number Connector Price (£) TSW 2/ 38, 45, 60, 70 Subvis 110.00

Part Number HTC 2.5/10 HTC 4/10 HTC 5/10 HTC 5/5 integral 2m lead HTC 5/5 Integral 2m lead HSSW 2/38,45,60,70 HSSW 4/38,45,60,70 HGSW 4/38,45,60,70

Manual High Temperature Range Part Number

Shear Wave Gold Series Transducers – Stainless Steel Case

TSW 4/ 38, 45, 60, 70

Connector

Price (£)

SSHSC 4/10

Lemo 00

290.00

SSHTC 1/20

Lemo 00

340.00

SSHTC 2/20L

Lemo 00

315.00

SSHTC 2.5/10

Lemo 00

300.00

SSHTC 4/6 SSHTC 4/10

Subvis Lemo 00

300.00 300.00

SSHTC 4/20

Lemo 00

330.00

SSHTC 5/10

Lemo 00

300.00

SSHTC 5/20 Lemo 00 330.00 HHSSW Lemo 00 220.00 2/10,38,45,60,70 HHSSW Lemo 00 220.00 4/10,38,45,60,70 HHTC 4/10 Lemo 00 POA Shear Wave Transducers – Single Clear Subvis Lemo 00 Part Number Price Price (£) SSW 2/38,45,60,70

67.00

69.00

SSW 2.5/ 38,45,60,70

67.00

69.00

SSW 4/ 38,45,60,70 RMSW 2.5/38,40,45,60,70 LSW 1/38,45,60,70

67.00

£69.00

111.00

n/a

195.00

195.00

LSW 2/38,45,60,70 LSW 4/38,45,60,70

145.00 145.00

145.00 145.00

www.ndtes.co.uk

Part Number

Lemo 00 Price (£)

Subvis

110.00

TBP 5/ 38, 45, 60, 70 Lemo No. 1 165.00 TBP 5/ 38, 45, 60, 70 BNC 165.00 Automated Testing Single Crystal Shear Wave Transducers for use with Scanners Lemo 00 Part Number Price (£) ASSW 2/ 38, 45, 60, 70 235.00 ASSW 2.5/ 38, 45, 60, 70 255.00 ASSW 4/ 38, 45, 60, 70 255.00 Automated Testing Twin Crystal Shear Wave Transducers for use with Scanners Lemo 00 Part Number Price (£) ATSW 2/ 38, 45, 60, 70 310.00 ATSW 4/ 38, 45, 60, 70

310.00

Automated Testing Shear Wave Gold Series Transducers Lemo 00 POA AGSW 2/ 38, 45, 60, 70 280.00 AGSW 4/ 38, 45, 60, 70

280.00

Sub Miniature Single Crystal Shear Wave Transducers Part Number SMS 2.25/ 38,40,45,60,70 SMS 5/ 38,40,45,60,70 SMS 7.5/ 38,40,45,60,70

Page 55 Back to contents page

Side Entry Subvis (£)

Top Entry Subvis (£)

POA 205.00

POA

205.00

205.00 205.00

[email protected]

TRANSDUCERS - PHOENIX

Surface Wave Transducers Part Number Lemo 00 Price (£) SUW 2 175.00 SUW 2.5 175.00 SUW 4 175.00 De-mountable TOFD Transducers Part Number Case Size Price Each (£) DTOF 2/04 M20 POA DTOF 2/06 M30 POA DTOF 3.5/03 M20 POA DTOF 3.5/04 M20 POA

Half Height M12 TOFD Transducers Part Number Case size Price Each (£) DTOFM-5/01 M12 370.00 DTOFM-10/01 M12 370.00 DTOFM-15/01 M12 370.00 DTOFM-5/02 M12 370.00 Piezocomposite Half Height TOFD Transducers Part Number Case size Price Each (£) CDTOFM-5/01 M12 420.00 CDTOFM-10/01 M12 POA CDTOFM-15/01 M12 POA

DTOF 5/01

CDTOFM-5/02 M12 420.00 Automated Testing TOFD Transducers Part Number Crystal Diameter Price Each (£) ATOF 2.5/04/ 0.5” (12.5mm) POA ATOF 3.5/03/ POA 0.375” (9.5mm) ATOF 3.5/04/ POA 0.5” (12.5mm) ATOF 5/02/ POA 0.25” (6.3mm) ATOF 5/03/ POA 0.375” (9.5mm) ATOF 5/04/ POA 0.5” (12.5mm) ATOF 10/01/ POA 0.125” (3.1mm)

M12

POA

DTOF 5/02 M12 POA DTOF 5/03 M20 POA DTOF 5/04 M20 POA DTOF 7.5/01 M12 POA DTOF 7.5/02 M12 POA DTOF 10/01 M12 POA DTOF 10/02 M12 POA DTOF 15/01 M12 POA DTOF 15/02 M12 POA De-mountable Piezocomposite TOFD Transducers Thread Price Each Part Number Size (£) CDTOF 2/02 M12 340.00 CDTOF 2/04 M20 340.00 CDTOF 3.5/03

M20 340.00

CDTOF 3.5/04 CDTOF 5/01 CDTOF 5/02 CDTOF 5/03 CDTOF5/04 CDTOF 7.5/01 CDTOF 7.5/02 CDTOF 10/01 CDTOF 10/02 CDTOF 15/01

M20 M12 M12 M20 M20 M12 M12 M12 M12 M12

340.00 340.00 340.00 450.00 340.00 360.00 360.00 440.00 440.00

CDTOF 15/02

M12

800.00

www.ndtes.co.uk

440.00

ATOF 10/02/ ATOF 15/01/

0.25” (6.3mm) 0.125” (3.1mm)

POA

ATOF 15/02/ POA 0.25” (6.3mm) De-mountable Irrigated TOFT Wedges available in Plastic, S/Steel or Brass Price Price Each Price Each Each IrriPart No. Irrigated Irrigated S/ gated Plastic Steel Brass WTOFI 12/45 100.00 175.00 175.00 WTOFI 12/60 100.00 175.00 175.00 WTOFI 12/70 100.00 175.00 175.00 WTOFI 20/45 175.00 100.00 175.00 WTOFI 20/60 175.00 100.00 175.00 WTOFI 20/70 175.00 100.00 175.00 WTOFI 30/45 250.00 175.00 WTOFI 30/60 250.00 175.00 WTOFI 30/70 250.00 175.00 Couplant Skids – FR 1 set per wedge (1 x £50.00 (set) front & 1 x rear

Page 56 Back to contents page

[email protected]

TRANSDUCERS - PHOENIX Automated Testing Creep Wave Transducers Part No. Crystal Size Housing Lemo 00 (£)

Flex Transducers – Single Element Part Number Description Connector Price (£)

ACW 2/13 2 (6x13) 30x30 515.00 ACW 2/20 2 (10x20) 30x30 515.00 ACW 2/25 2 (8x25) 40x40 POA ACW 4/13 2 (6x13) 30x30 515.00 ACW 4/20 2 (10x20) 30x30 515.00 ACW 4/25 2 (8x25) 40x40 POA Single Crystal Angle Compression Transducers Part No. Crystal Dia Subvis (£) Lemo 00 (£)

FFSC 1/10 FFSC 1/20 FFSC 2/6 FFSC 2/10 FFSC 2/15 FFSC 2/20 FFSC 3.5/6 FFSC 3.5/10

1MHz Ø 10mm Crystal 1MHz Ø 20mm Crystal 2MHz Ø 6mm Crystal 2MHz Ø 10mm Crystal 2MHz Ø 15mm Crystal 2MHz Ø 20mm Crystal 3.5MHz Ø 6mm Crystal 3.5MHz Ø 10mm Crystal

Microdot Microdot Microdot Microdot Microdot Microdot Microdot Microdot

POA 1050.00 550.00 700.00 875.00 1050.00 550.00 700.00

SAC 2/A

10

200.00

200.00

FFSC 3.5/15

3.5MHz Ø 15mm Crystal Microdot

875.00

SAC 2.5/A

10

200.00

200.00

FFSC 3.5/20

3.5MHz Ø 20mm Crystal Microdot

1050.00

SAC 4/A

10

200.00

200.00

FFSC 5/6

5MHz Ø 6mm Crystal

Microdot

475.00

FFSC 5/10 FFSC 5/15 FFSC 5/20 FFSC 10/6

5MHz Ø 10mm Crystal 5MHz Ø 15mm Crystal 5MHz Ø 20mm Crystal 10MHz Ø 6mm Crystal

Microdot Microdot Microdot Microdot

475.00 475.00 475.00 530.00

10MHz Ø10mm Crystal

Microdot

530.00

LAC 1/A 20 230.00 230.00 LAC 2/A 20 230.00 230.00 LAC 4/A 20 230.00 230.00 Twin Angled Compression Transducers Part No.

Crystal

Subvis (£) Lemo 00(£) FFSC 10/10

TAC F/A/25 TAC F/A/30 TAC F/A/40 TAC F/A/50

6x13 POA 425.00 8x15 POA 525.00 12x20 POA POA 15x25 POA POA Irrigated Probes Subvis Lemo 0 Part No Crystal (£) (£) TAC-Ir F/A/25 7x10 POA POA TAC-Ir F/A/30 8x14 POA POA TAC-Ir F/A/40 10x18 POA POA TAC-Ir F/A/50 15x25 POA POA Long Range Probes & Wedges (Includes irrigation and gimbal pins) Price Description (£) Two Search Probe Lemo 00 Frequency: 2MHz, Crystal: Single 12mm Ø Angle: 0°

950.00

Two Couplant Monitoring (Subvis) Frequency: 2MHz, Crystal: Single 6mm Ø Angle: 0°

410.00

Flex Transducers – Single Element (Composite) Part Number CFFSC 1/10 CFFSC 1/20 CFFSC 2/6

Description Connector Price (£) 1MHz Ø 10mm Crystal Microdot POA 1MHz Ø 20mm Crystal Microdot 1400.00 2MHz Ø 6mm Crystal Microdot 775.00

CFFSC 2/10

2MHz Ø 10mm Crystal

Microdot

1050.00

CFFSC 2/15 CFFSC 2/20 CFFSC 3.5/6 CFFSC 3.5/10

2MHz Ø 15mm Crystal 2MHz Ø 20mm Crystal 3.5MHz Ø 6mm Crystal 3.5MHz Ø 10mm Crystal

Microdot Microdot Microdot Microdot

1225.00 1400.00 775.00 1050.00

CFFSC 3.5/15

3.5MHz Ø 15mm Crystal Microdot

1225.00

CFFSC 3.5/20

3.5MHz Ø 20mm Crystal Microdot

1400.00

CFFSC 5/6 5MHz Ø 6mm Crystal Microdot CFFSC 5/10 5MHz Ø 10mm Crystal Microdot CFFSC 5/15 5MHz Ø 15mm Crystal Microdot CFFSC 5/20 5MHz Ø 20mm Crystal Microdot CFFSC 10/6 10MHz Ø 6mm Crystal Microdot CFFSC 10/10 10MHz Ø 10mm Crystal Microdot Cables for use with Flex Transducers

590.00 700.00 755.00 825.00 755.00 875.00

Part No. PCL00-M Wedges (Includes Irrigation & Gimbal pins) Flat Wedges to suit above probes (foot print 50 x 25mm wide) Contoured Wedges to suit above probes, pipe diameter to be specified by customer. (foot print 50 x 25mm wide)

www.ndtes.co.uk

590.00

Instrument /Transducer Price (£) Lemo 00 / Microdot

56.00

Lemo 00 / Microdot

60.00

BNC / Microdot

54.00

TPCL00-M

Single 2m Cable Single 2m Cable Single 2m Cable Twin 2m Cable

Lemo 00 / Microdot

112.00

TPCL1-M TPCBNC

Twin 2m Cable Twin 2m Cable

Lemo 1 / Microdot BNC / Microdot

120.00 108.00

PCL1-M 540.00

Description

PCBNC-M

Page 57 Back to contents page

[email protected]

TRANSDUCERS - PHOENIX T

Single Crystal Compression Wave Transducers Crystal Subvis Lemo 00 Part No. Diameter Price (£) Price (£) SC 5/5 5 170.00 N/A SC 2.5/10 10 107.00 114.00 SC 4/10 10 107.00 114.00 SC 5/10

10

107.00

114.00

SC 1/20 SC 2/20 SC 4/20

20 20 20

115.00 115.00 120.00

118.00 118.00 125.00

SC 5/20

20

120.00

125.00

Automated Testing Twin Crystal Compression Wave Transducers for use with Scanners Crystal Lemo 00 Part Number Housing Size Diameter Price (£) ATC 2.5/10-L 10 30x30X28 295.00 ATC 4/10-L 10 30x30X28 295.00 ATC 5/10-L 10 30x30X28 295.00 ATC 5/10 SF10 30x30X28 315.00 L ATC 1/20-L 20 40x40X34.5 315.00 ATC 2/20-L 20 40x40X34.5 305.00 ATC 4/20-L 20 40x40X34.5 305.00 Twin Crystal Compression Wave Transducers Corrosion Mapping Part Twin Crystal Connector Price (£) Number

Single Crystal Compression Wave Transducers Corrosion Mapping Single ConnecPart No. Price (£) SSTC 2/20 2MHz 20mm Lemo 00 215.00 Crystal tor SSTC 2.5 MHz SSSC 1/20 1 MHz 20mm Lemo 00 360.00 Lemo 00 205.00 2.5/10 10mm SSSC 2/20 2 MHz 20mm Lemo 00 215.00 SSTC 4/6 4 MHz 6mm Subvis 205.00 SSSC 2.5 MHz Lemo 00 215.00 SSTC 4/10 4 MHz 10mm Lemo 00 205.00 2.5/10 10mm SSSC 4/6 4 MHz 6mm Subvis 215.00 SSTC 4/20 4 MHz 20mm Lemo 00 215.00 SSSC 4/10 4 MHz 10mm Lemo 00 215.00 SSTC 5/10 5 MHz 10mm Lemo 00 205.00 SSSC 4/20 4 MHz 20mm Lemo 00 215.00 SSTC 5/20 5 MHz 20mm Lemo 00 215.00 High Temperature Twin Crystal Compression Wave SSSC 5/20 5 MHz 20mm Lemo 00 215.00 Transducers – Corrosion Mapping Twin Crystal Compression Wave ConnecPart Number Price Twin Crystal Transducers tor Crystal Subvis Lemo 00 Part No. SSHTC 1/20 1 MHz 20mm Lemo 00 340.00 Diameter Price (£) Price (£) TC 2.5/10 10 86.00 90.00 SSHTC2.5/10 2.5 MHz 10mm Lemo 00 300.00 TC 4/10 10 86.00 90.00 SSHTC 4/6 4 MHz 6mm Subvis 300.00 TC 5/10 10 86.00 90.00 SSHTC 4/10 4 MHz 10mm Lemo 00 300.00 TC 5/10 SF 10 93.00 103.00 SSHTC 4/20 4 MHz 20mm Lemo 00 330.00 TC 1/20 20 113.00 118.00 SSHTC 5/10 5 MHz 10mm Lemo 00 300.00 TC 2/20 20 93.00 98.00 SSHTC 5/20 5 MHz 20mm Lemo 00 330.00 Creeping Wave Transducers TC 4/20 20 93.00 98.00 Part Lemo 00 Crystal Size Housing Size TC 5/20 20 93.00 98.00 Number Price (£) CW Pit Probe 2 (4x4) 270.00 N/A 2 (6x13) 25 x 25X25 450.00 2/13 Twin Crystal Compression Wave CW 2 (10x20) 30 x 30X28 455.00 Transducers 2/20 Crystal Connec- Price CW Part No. Dia. tor (£) 2 (8x25) 40 x 40 POA 2/25 Type TC 5/5 (integral 2m 5 Lemo CW 195.00 2 (6x13) 30 x 30X28 450.00 lead) No.1 4/13 TC 5/5 (integral 2m CW 5 BNC 195.00 2 (10x20) 30 x 30X28 455.00 lead) 4/20 CW TC 5/5 (Side Entry) 5 Subvis 215.00 2 (8x25) 40 x 40 POA 4/25 TC 10/6 (Side 6 Subvis POA Entry)

www.ndtes.co.uk

Page 58 Back to contents page

[email protected]

TRANSDUCERS - PHOENIX

De-mountable BRASS WREN irrigated TOFD Wedges Part Number & Thread Size Price (£) WRENI 12/45 - M12 175.00 WRENI 12/60 - M12 175.00 WRENI 12/70 - M12 175.00 De-mountable High Temperature irrigated S/Steel TOFD Wedges Part Number Thread Price (£)

Corrosion Mapping Probes Durable Steel Case Single & Twin Crystal Compression Wave Transducers Part Number Single Crystal Connector Price (£) SSSC 1/20 1 MHz 20mm Lemo 00 POA SSSC 2/20 2 MHz 20mm Lemo 00 POA SSSC 2.5/10 2.5 MHz 10mm Lemo 00 POA SSSC 4/6

4 MHz 6mm

Subvis

POA

SSSC 4/10

4 MHz 10mm

Lemo 00

POA

WTOFSSI HT 12/45

M12

210.00

SSSC 4/20

4 MHz 20mm

Lemo 00

POA

WTOFSSI HT 12/60

M12

210.00

SSSC 5/20

5 MHz 20mm

Lemo 00

POA

WTOFSSI HT 12/70

M12

210.00

WTOFSSI HT 20/45

M20

210.00

Part Number

Twin Crystal

Connector

Price (£)

WTOFSSI HT 20/60

M20

210.00

SSTC 2/20

2 MHz 20mm

Lemo 00

215.00

2.5 MHz 10mm

Lemo 00

205.00

SSTC 4/6

4 MHz 6mm

Subvis

205.00

SSTC 4/10

4 MHz 10mm

Lemo 00

205.00

Standard Temperature Range

WTOFSSI HT 20/70 M20 210.00 Automated High Temperature TOFD Transducers Lemo 00 Part Number Angle Price (£) AHTOF 2.5/04/A 45,60,70 P.O.A AHTOF 3.5/03/A 45,60,70 P.O.A AHTOF 3.5/04/A 45,60,70 P.O.A AHTOF 5/02/A 45,60,70 P.O.A AHTOF/5/03/A 45,60,70 P.O.A AHTOF/5/04/A 45,60,70 P.O.A Pipe Wizard Style TOFD Wedges Thread Price Each Part Number Size (£) WTOF-PW 3/8-45 3/8” UNEF POA

SSTC 2.5/10

WTOF-PW 3/8-60

3/8” UNEF

WTOF-PW 3/8-65 WTOF-PW 3/8-70 WTOF-PW 12/45 WTOF-PW 12/60

SSTC 4/20 SSTC 5/10 SSTC 5/20

4 MHz 20mm Lemo 00 215.00 5 MHz 10mm Lemo 00 205.00 5 MHz 20mm Lemo 00 215.00 High Temperature Range Part Number Connector Price (£) Crystal SSHSC 4/10 4 MHz 10mm Single Lemo 00 290.00 SSHSC 1/20 1 MHz 20mm Twin Lemo 00 340.00 2.5 MHz 10mm Twin

Lemo 00

300.00

SSHSC 4/6

4 MHz 6mm Twin

Subvis

300.00

POA

SSHSC 4/10

4 MHz 10mm Twin

Lemo 00

300.00

3/8” UNEF 3/8” UNEF M12 M12

POA POA POA POA

SSHSC 4/20 SSHSC 5/10 SSHSC 5/20

4 MHz 20mm Twin 5 MHz 10mm Twin 5 MHz 20mm Twin IR Emitters

Lemo 00 Lemo 00 Lemo 00

330.00 300.00 330.00

WTOF-PW 12/65

M12

POA

WTOF-PW 12/70

M12

POA

North American Style TOFD Wedges Thread Size

Price Each Irrigated (£)

WTOF-NAS 3/8-45

3/8” UNEF

125.00

WTOF-NAS 3/8-60 WTOF-NAS 3/8-70

3/8” UNEF 3/8” UNEF

125.00 125.00

Part Number

www.ndtes.co.uk

SSHSC 2.5/10

Part Description Number DEM-6 Infra red emitter for 6mm range push fit Push On onto 10mm dia probe 2m cable DEM-6 Infra red emitter glue on any probe Glue On DEM-10 Infra red emitter for 10mm range push fit Push On onto 10-18mm dia probe 2m cable DEM-20 Infra red emitter for 20mm range push fit Push On onto 29mm dia probe max 2m cable Permanent For fitting to SSTC 4/10 Probe 2m cable

Page 59 Back to contents page

Price (£) 85.00 85.00 90.00 90.00 100.00

[email protected]

ULTRASONIC – CABLES - ACCESSORIES Ultrasonics Cables Price (£) Single No 1 Lemo to 00 Lemo x 2 metres cable 34.60 Twin No 1 Lemo to 00 Lemo x 2 metres cable 69.20 Single No 1 Lemo to No 1 Lemo x 2 metres cable 45.62 Twin No 1 Lemo to No 1 Lemo x 2 metres cable 91.24 Single BNC to 00 Lemo x 2 metres cable 25.85 Twin BNC to 00 Lemo x 2 metres cable 51.70 Single BNC to No 1 Lemo x 2 metres cable 31.80 Twin BNC to No 1 Lemo x 2 metres cable 63.60 Single No 1 Lemo to Subvis x 2 metres cable 30.00 Twin No 1 Lemo to Subvis x 2 metres cable 60.00 Single 00 Lemo to Subvis x 2 metres cable 27.80 Twin 00 Lemo to Subvis x 2 metres cable 55.60 Single 00 Lemo to 00 Lemo x 2 metre cable 27.80 Twin 00 Lemo to 00 Lemo x 2 metre cable 55.60 Single BNC to Subvis x 2 metres cable 23.65 Twin BNC to Subvis x 2 metres cable 47.30 Single BNC to Microdot x 2 metres cable 50.00 Twin BNC to Microdot x 2 metres cable 100.00 Single No 1 Lemo to Microdot x 2 metres cable 60.00 Twin No 1 Lemo to Microdot x 2 metres cable 120.00 Single 00 Lemo to Microdot x 2 metres cable 58.00 Twin 00 Lemo to Microdot x 2 metres cable 116.00 Above cables are RG174U 50Ω, thicker or other cables may be used The above are our standard “Off the shelf” ranges of leads. Any type of lead with your choice of connector and length can be supplied. Details are available on request. Accessories Price (£) Probe Re-shoe service (subject to evaluation) 22.00 Re-shoeing Kit Comprising: 10 Re-shoe Plates 25.50 Adhesive 5grm, Bottle 10.00 BNC/Lemo No 1 adaptor 17.00 Lemo No 1 to BNC Adaptor 17.00 Soft Face Probe Membranes (pack of 10) , please advise probe make and model 23.00 Lead Refurbishing/Conversion (Single) 12.00 Lead Refurbishing/Conversion (Twin) 24.00 USM2 Battery Pack subject to availability USK6/7 Battery Pack subject to availability USK6/7 Battery Charger subject to availability USK6/7 Carry Bag, NDT-ES Manufacture USN52 Carry Bag,NDT- ES Manufacture Replacement Graticules for USK 6-7 subject to availability

LEMO-1

www.ndtes.co.uk

BNC

LEMO - 00 Page 60 Back to contents page

260.00 100.00 145.00 80.00 95.00 50.00

SUBVIS

MICRODOT

[email protected]

ULTRASONIC COUPLANTS Surtest Couplan t

Dries in Use

Temperature Range C and F

Packaging

Comments

Yes

No

-10 to + 50°C, 14 to 122°F

25 litre 205 litre 20 litre pack + pump & bottles.

Water Based RTU (can be diluted)

Surtest

Use

Approvals

Thixotropic

Fluorescent Appearance

Corrosion Resistance

Water Removable

Surtest

Use

Approvals

Thixotropic

Fluorescent Appearance

Corrosion Resistance

Water Removable

Surtest Couplan t

Solvent Removable

Solvent Removable

UCA – 2M

UCA 3HT

Dries in Use

Yes

Model Number UCA – 2M (Water Based)

No

Temperature Range C and F

Packaging

Comments

40 to 250°C 102 to 480°F

1 litre

Silicone Grease Based

Size 4 x 1 Litre (minimum order quantity 2 packs) 25 Litre Container 200 Litre Drum

Price (£) 52.00 per 4 ltr pack 220.00 1,638.00

Model Number NDT ZGM HT UCA – 3HT

Size 100 Gram Tube (min qty , 2 tubes ) 4 x 1 Litre

Price (£) 24.00 £154.00 per pack

UCA – 7

4 x 1 Kilo Container

£234.00 per pack

UCA – HT or HTC (V)

1 Kilo Container

Model

P.O.A

Size

Price (£)

Sonagel W1

4 x 1 Litre (minimum order quantity 2 packs)

£33.00 per pack

Sonagel W25

25 Litre

www.ndtes.co.uk

£135.00

Page 61 Back to contents page

[email protected]

ULTRASONIC PLATE & RAIL TESTING TROLLEYS PLATESCAN 4 – Multi Probe Manual Plate Tester

Test head raised

100% indexed

BR40/058698 Bi Directional rail trolley

50% indexes

Tests essentially to plate extreme edges using idler wheels. Test head rotate facility enables scan index to be adjusted. A manually operated ultrasonic plate testing trolley Excellent manoeuvrability for different scan patterns Standard type A test heads with a single 4 probe block for scan indices from 10 to 75mm per probe. Optional type B test heads with 4 individual probe holders for scan indices up to 150mm per probe Replaceable steel wear shoe (s). Multiplexed operation for four probes using optional 4 channel Mux1 Multiplexer Fifth probe facility enables localised scanning to be undertaken Optional 8 probe test head and 8 channel Mux2 multiplexers are also available. P.O.A 8 litre water reservoir with on/off valve. Mounting for ultrasonic flaw detector. Manufactured in square section steel for durability Prices: Platescan 4 - £4,120.00 Multiplexer MUX1 - £2,975.00 Multiplexer MUX2 - £4,350.00 Probes PT1 2MHz—£135.00 (4 / 8 required per trolley) Probes PT1 4MHz £135.00 (4 / 8 required per trolley)

Prices from Bi directional rail Trolley Including probes Spare probe pack ** Subject to availability ** 113A Rail Section STD 2/500 CB 88 Metric CB87M Metric Universal CB 91 APT B/1 Axle Test Block

£3,230.00 £735.00

£454.00 £867.00 £216.00 £105.00 £413.00

Suggested Ultrasonic Flaw Detectors Sonatest RailScan 125R

GE USM25R Please call for prices.

MOST PORTABLE ULTRASONIC FLAW DE-

www.ndtes.co.uk

Page 62 Back to contents page

[email protected]

ULTRASONIC MULTIPLEXERS AND SEQUENCERS ULTRASONIC SEQUENCER UNITS Sequential Switching units for multiple probe operation with ultrasonic flaw detectors and thickness gauges

MULTIPLEXERS – MUX 1 AND MUX 2 SERIES For sequential switching of similar test probes at PRF rate. Standard units in 4 and 8 channels, specials as required with rack mounting options.

For applications where several identical ultrasonic tests are required using a fixed group of ultrasonic probes. The sequencer Units switch from probe to probe with a preset dwell time on each test. Operation with most makes of ultrasonic units. Ultrasonic Multiplexers are available where high speed switching at PRF rates is required

General Facilities:             

General Facilities: Available in 4, 8, 12, 16 channels and specials Adjustable dwell time on each probe (typically 0.5-30 secs) ‘Auto’ mode with continuous switching ‘Single’ test sequence mode with remote start ‘Manual’ selection of each probe with selector switch Remote or front panel start/sweep LED indicates which probe is operating Slot adjusted limited range balance for each probe





 

Prices: MUX 1 4 channel - £2,975.00 MUX 2 8 channel - £4350.00

Price Range - £1,900.00 - £3450.00 Please specify test requirements

www.ndtes.co.uk

Portable ultrasonic multiplexers for 4 or 8 channel operation Simple 2 cable connection to standard flaw detector Applications for manual and automatic inspection requirements Individual balance controls to equalize probe sensitivities Individual delay controls to obtain coincident signals for varying probe face wear and testing distances Additional hand scan probe operating at flaw detector PRF Rechargeable battery or mains power pack Option available for multiplexed thickness gauge operation Specials and rack mounted options

Page 63 Back to contents page

[email protected]

FLAWED SPECIMEN NDE Educational Kits Material

UT Kit

VT Kit

MT Kit

Item

Part No

£

Part No

£

Fe

KTCS86

928

KTCS87

928

S/S

KTSS86

1205

N/A

N/A

KTCS8 8 N/A

Al

KTAL86

1205

N/A

N/A

N/A

Part No

RT Kit

Demo Kit

£

Part No

£

Part No

£

Part No

£

928

KTCS89

928

KTCS90

928

KTCS91

928

N/A

KTSS89

1205

KTSS90

1205

N/A

N/A

N/A

KTAL89

1205

KTAL90

1205

N/A

N/A

Flawed Specimen Sets MT Set £ Part No £

Item

UT Set Part No

Fe

FSCS01

S/S

FSSS01

1514.00

N/A

N/A

N/A

N/A

FSSS04

1027.00

FSSS05

1189.00 1,514.00

Al

FSAL01

1,623.00

N/A

N/A

N/A

N/A

FSAL04

1360.00

FSAL05

1623.00

Material

VT Set Part No

PT Kit

£ 1189.00

FSCS02

816.00

FSCS03

PT Set Part No

£

RT Set Part No

998.00

FSCS04

998.00

FSCS05

Item SV Plate SV Pipe SV Pipe SV Pipe SV Pipe SV Tee SV Y SV Nozzle

Part No M-C-01 M-C-02 M-C-03 M-C-04 M-C-05 M-C-06 M-C-07 M-C-08

£ 194.00 202.00 224.00 250.00 295.00 202.00 202.00 493.00

Magnetic and Penetrant Item Part No £ SV Nozzle M-C-09 542.00 SV Node M-C-10 599.00 SV Node M-C-11 599.00 Set 1M M-C-12S 1639.00 SV Plate P-C-01 194.00 SV Pipe P-C-02 202.00 SV Pipe P-C-03 224.00 SV Pipe P-C-04 250.00

Item SV Plate SV Plate SV late DV Plate DV Plate DV Plate SV Pipe SV Pipe SV Pipe SV Pipe

Part No U-C-14 U-C-15 U-C-16 U-C-17 U-C-18 U-C-19 U-C-20 U-C-21 U-C-22 U-C-23

£ 234.00 275.00 334.00 305.00 334.00 365.00 305.00 396.00 467.00 427.00

Item SV Pipe SV Pipe SV Pipe SV Tee SV Tee DV Tee DV Tee SV Y SV Y SV Nozzle

Item SV Plate SV Plate SV Plate SV Plate SV Plate SV Plate DV Plate DV Plate

Part No R-C-50 R-C-51 R-C-52 R-C-53 R-C-54 R-C-55 R-C-56 R-C-57

£ 234.00 242.00 254.00 286.00 332.00 393.00 234.00 260.00

£ 550.00 691.00 741.00 334.00 387.00 345.00 396.00 382.00 436.00 959.00

Radiographic Part No £ R-C-58 279.00 R-C-59 304.00 R-C-60 333.00 R-C-61 364.00 R-C-62 272.00 R-C-63 304.00 R-C-64 323.00 R-C-65 364.00

Item DV Plate DV Plate DV Plate DV Plate SV Pipe SV Pipe SV Pipe SV Pipe

Item SV Pipe SV Tee SV Y SV Nozzle SV Nozzle SV Node SV Node Set 1P

Part No P-C-05 P-C-06 P-C-07 P-C-08 P-C-09 P-C-10 P-C-11 P-C-12S

£ 295.00 202.00 202.00 493.00 542.00 599.00 599.00 1,639.00

Item SV Nozzle DV Nozzle DV Nozzle SV Node SV Node Set 2 Set 3 Set 4 Set 5 Set 6 Set 7

Part No U-C-34 U-C-35 U-C-36 U-C-37 U-C-38 U-C-39 U-C-40 U-C-41 U-C-42 U-C-43 U-C-44

£ 1,200.00 984,00 1,200.00 1,504.00 1,566.00 3,833.00 3,110.00 4,386.00 8,791.00 6,139.00 3,799.00

Item SV Pipe SV Pipe SV Pipe SV Pipe SV Pipe Set 8

Part No R-C-66 R-C-67 R-C-68 R-C-69 R-C-70 R-C-71

£ 404.00 440.00 501.00 689.00 741.00 3,956.00

Item

Part No

£

Visual

Page 60 Part No

£

SV Plate

V-C-73

SV Pipe

Item

Ultrasonic Part No U-C-24 U-C-25 U-C-26 U-C-27 U-C-28 U-C-29 U-C-30 U-C-31 U-C-32 U-C-33

£

Item

Part No

£

174.00

SV Pipe

V-C-77

276.00

SV Nozzle

V-C-81

525.00

V-C-74

179.00

SV Tee

V-C-78

179.00

SV Node

V-C-82

581.00

SV Pipe

V-C-75

224.00

V-C-79

179.00

SV Node

V-C-83

581.00

SV Pipe

V-C-76

232.00

SV Y SV Nozzle

V-C-80

525.00

Set 9

V-C-84

1,503.00

www.ndtes.co.uk

Page 64 Back to contents page

[email protected]

EDDY CURRENT EQUIPMENT MENTOR EDDY CURRENT UNIT PACK Mentor EM Base Instrument 2 Channel Probe Module Connectivity Module (USB, 3-encoder input) Charger / Power Supply (US, Euro, UK) Transport Case Mentor Create Software Quick Start Guide, Operators Manual, Instructional/informational Videos Weld and Surface Inspection Workflows Price on Application AUTOSIGMA 3000 Compact hand held unit with LCD display Reads in % IACS or MS/m 0.8% - 110% IACS, 0.45 – 64 MS/m 60 KHz and 500 KHz operating frequencies Compensation for lift off and temperature Field interchangeable probes 100 hour alkaline battery life 500 reading data logger with PC connectivity Weight 0.4kg including batteries Dimensions 165mm x 74mm x 41mm Full details available on request for all the above products Products above subject to availability, price on application Price on Application

AutoSigma 3000

Mentor EM

A FULL RANGE OF PROBES, CABLES AND ACCESSORIES IS AVAILABLE

PLEASE CONTACT OUR OFFICE TO OBTAIN OUR LATEST PRICES. REMEMBER TO HAVE YOUR REQUIREMENTS AND LIST OF ACCESSORIES READY

www.ndtes.co.uk

Page 65 Back to contents page

[email protected]

WELDING GAUGES Gauges Model

Price (£)

“HI-LO” Weld Gauge (GAL) Adjustable Fillet Weld Gauge (GAL) “HI-LO” Single Purpose Weld-Deerman Gauge V-WAC Gauge WTPS Weld Gauge With Calibration Block Fillet Weld Gauge Set Cambridge Type Weld Gauge Welding Institute

169.00 117.00 49.00 49.00 99.00 59.80 69.00

AWS Weld Gauge Pipe Pit Gauge (GAL) Weld Profile Needle Gauge 5” Metal Skew-T/Calculator Fillet Gauge

49.00 112.50 12.00 215.00

AWS Weld Gauge

Adjustable Fillet Weld Gauge

Single Purpose Welding Gauge WTPS Weld Gauge

Weld Fillet Gauge Sets

V-WAC Gauge

Cambridge Gauge

www.ndtes.co.uk

Pipe Pit Gauge Page 66 Back to contents page

[email protected]

COATING TEST EQUIPMENT Coating Thickness Meter Cat Number C5001 Ferrous Ferrous C5002 C5003 C5004 C5005 C5006

Ferrous Non-Ferrous Non-Ferrous Ferrous & Non-Ferrous Ferrous & Non-Ferrous

C5007

Accuracy ±1 to 3% 0 –1000µm / 0–40mils . 0–2000µm /0–80mils 0–5mm 0–200mils 1–20mm / 40–800mils 0–1000µm / 0–40mils 0–2000µm /0–80mils 0–1000µm / 0–40mils F 0–2000µm/ 0–80mils F 0–5mm / 0–200mils N 0–2000µm / 0–80mils

Calibration Certificate for probe and Foils above

Price (£) 495.00 595.00 695.00 595.00 695.00 795.00 995.00 25.00

All models are supplied in an industrial foam-filled Carrying Case with flexible lead Measuring Probe (Ferrous and Non-Ferrous instruments have two Measuring Probes), set of 8 Calibration Foils and Zero Disk (Ferrous and Non-Ferrous instruments have two Zero Disks and C5003 Model has 3 Foils). USB PC Download Cable is available as an optional extra enables the stored batches to be downloaded to computer directly into Microsoft Word and Excel. 45.00 Full range of optional spares and accessories available, please ask Wet Film Thickness Measurement Cat Number W2001 W1003 W2008

Stainless Steel Comb – 25—1500 1—59mils, 45 teeth Stainless Steel Comb - 50—5000µm 2—100mi, 45 teeth Plastic Comb—50–900µm 2 –36 mils, 18 teeth

www.ndtes.co.uk

Page 67 Back to contents page

Price (£) 45.00 50.00 25.00

[email protected]

Paint inspection Cat Number

Dew point Meter Specifications

Price (£)

H3001

Range %rh 1–100% , Temperature Range Air -10–70°C (14–160°F), Surface -20–80°C (-4–176°F) Supplied in a Carrying Case with a Humidity Sensor and Surface Temperature Probe.

295.00

Gloss Meter G2001

Standard Model 60° , 0–100GU

995.00

G2002

Standard Model 60°/20°/Haze 0–100GU / 0–100HU

1295.00

G2101 G2102

Top Model 60° , 0–100GU Top Model 60°/20°/Haze 0–100GU / 0–100HU

1095.00 1395.00

NG001

Gloss meter Calibration Certificate

25.00

All models are supplied in an industrial foam-filled Carrying Case with Gloss Tile and Charger. The Top Model is also supplied with USB Download Cable and Download Software. Paint Inspection Kit equipment supplied in the Paint Inspection Kit will enable on-site testing for all five stages of blast-cleaned steel and coating inspection in the following stages: Stage 1. Surface Profile measurement of the blasted profile Surface Cleanliness testing for water-soluble salts and corrosion prodStage 2 ucts. Surface Cleanliness assessment for the quantity and size of dust partiStage 3. cles. Stage 4. Climatic Conditions for the estimation of the probability of condensation. Stage 5. Coating Thickness measurement to ensure the correct coating thickness Paint inspection kit calibration certificate The Calibration Certificates with traceability to UKAS are an optional extra.

1395.00

150.00

Gloss Meter Paint Inspection Kit

Dew Point Meter

www.ndtes.co.uk

Page 68 Back to contents page

[email protected]

COATING TEST EQUIPMENT – POROSITY / PIN HOLES Price(£)

Porosity Detection -

PD6kV D.C. Holiday Detector c/w Shoulder Bag, coiled interconnecting lead, test probe handle, universal power pack (including in-car charger), battery charger with 4 x rechargeable batteries, 5m earth lead, drum brush electrode, test voltage calculator and manual incorporating a calibration certificate. (Order code PD6) PD6C 6kV D.C. Holiday Detector c/w shoulder bag, coiled interconnecting lead, test probe handle, universal power pack (including in-car charger), battery charger with 4 x rechargeable batteries, 5m earth lead, drum brush electrode, test voltage calculator, pointed probe, 2 x 460mm extension rods, electrode shoe, screwdriver and 250mm phosphor bronze brush electrode and manual incorporating a calibration certificate all contained in a robust transit case, (Order code PD6C) PHD 1-20Kv D.C. Holiday Detector c/w Shoulder Bag, Battery, Built-in Charger (automatic mains selection). Mains Charger Lead, Earth Lead, Test Probe Handle (with HV lead and pressure safety switch) Steel Drum Brush (Order code D2) As above with addition of 150mm Conductive Rubber Electrode, Pointed Probe, 2 x Extension Rods (460mm) long. Earthing Magnet, Electrode Shoe. All contained in a “New-Style” robust carrying case. (Order code D2A) Pipeline Test Kit PHD 1-20Kv D.C. Holiday Detector c/w Shoulder Bag, Battery, Builtin Charger (automatic mains selection). Mains Charger Lead, Trailing Earth Lead, Test Probe Handle (with HV lead and pressure safety switch) 460mm Extension Rod, Electrode Shoe, 250mm Phosphor Bronze Brush Electrode. (Order code D23) PHD 2-40Kv D.C. Holiday Detector c/w Shoulder Bag, Battery, Built-in Charger (automatic mains selector) Mains Charger Lead, Earth Lead, Test Probe Handle (with HV lead and pressure safety switch) Steel Drum Brush (Order code D4) As above with addition of 150mm Conductive Rubber Electrode, Pointed Probe, 2 x Extension Rods (460mm) long, Earthing Magnet, Electrode Shoe. All contained in a “New-Style” robust carrying case. (Order code D4A) Full Range Of Accessories Available Price and Specification On Application

1,220.00

1,580.00

1,690.00 1,850.00

1,750.00

1,930.00 2,130.00

Accessories PHD 1-20 / PHD 2-40 Pipeline Test Kit

PHD 2-40 / PHD 1-20 Pin Hole / Holiday Detector

Miscellaneous Electrodes

www.ndtes.co.uk

Silicone Rubber Electrodes Page 69 Back to contents page

Phosphor Bronze Electrodes

[email protected]

SURFACE PROFILE Surface Preparation Cat Number R1001

Price (£)

R1004

Testex Tape Coarse, 20–64µm / 0.8–2.5mils (50 test per tape) Testex Tape (Extra Coarse, 38–115µm / 1.5–4.5mils (50 test per tape) Testex Gauge (metric) Includes roll of Coarse and X Coarse

297.50

R10054

Testex Gauge (imperial) Includes roll of Coarse and X Coarse

297.50

R1002

R2006 R2007

ISO Surface Profile Comparator Grit 25µm, 60µm,1 00µm, 150µm / 1mils, 2.4mils ,4mils , 6mils ISO Surface Profile Comparator Shot 25µm, 60µm,1 00µm, 150µm / 1mils, 2.4mils ,4mils , 6mils

36.00 36.00

96.00 96.00

R2008

Illuminated Magnifier X5. Includes Grit Comparator

197.50

R2000

Illuminated Magnifier X5. Includes Shot Comparator

197.50

R2010

Illuminated Magnifier X5. Includes Grit & Shot Comparators

297.50

Testex Tape & Swizzle stick

Illuminated Magnifier X5

Testex Gauge Bresle Test Kit

www.ndtes.co.uk

Page 70 Back to contents page

[email protected]

Surface Cleanliness Bresle Test Kit 50 Standard Adhesion 0–199µS/cm 50 High Adhesion 0.20–1.99mS/cm Supplied in a Carrying Case with Bresle Patches (pack of 50 Standard Adhesion), Bresle Patches Plus (pack of 50 High Adhesion), Conductivity Meter, 500ml Deionised Water, 3 x 5ml Syringes, Calibration Solution, Moistening Solution and 25ml Beaker.

P2005

NPC01 / NPC04

Bresle Calibration Solution & Patches Conformance Certificate

397.50

10.00

All spares and consumable available for the above products Dust Test Kit

NPC05 / NPC06 U1007

197.50

Pressure-sensitive tape (60m roll), Dust Test Charts (pack of 50) and X10 Illuminated Magnifier. 190nN/metre supplied in a Carrying Case with Dust Test Tape (60m roll), Dust Test Charts (pack of 50) and X10 Illuminated Magnifier. Dust Test Comparator Charts & Test Tape Conformance Certificate Rust Grade Book

10.00 327.50

Dust Test Kit Bresle Test Kit

Patches

Conductivity Gauge

Rust Grade Book

www.ndtes.co.uk

Page 71 Back to contents page

[email protected]

Adhesion

X1003

Standard Operating Range psi 0–3500 / MPa 0–25

1195.00

X1004

Right Angle Operating Range psi 0–3500 / MPa 0–25 Complete range of convex , concave and flat Dolly's available from 51mm / 2” to 914mm / 36”, prices on request Adhesion Tester calibration certificate

1295.00

NX001

25.00

Adhesion Testing Kit Supplied in an a Carrying Case with 5 Flat Dollies, Adhesive, Heated Dolly Remover, Dolly Cleaning Tool and Dolly Plug Cross Hatch Cutter , cutting edges 6, with 6 teeth X2001

Cutter Size 1mm /40mils, Coating Thicknes, Under 60µm /2,4mm

295.00

X2002

Cutter Size 2mm / 80mils, Coating Thicknes, Over 60µm / 2.4mild

295.00

XS001 XS002 XA001

Spare Cutter Head 1mm (40mils) Spare Cutter Head 2mm (80mils) Adhesion Test Tape 25mm (1”) 60m Roll (ISO 2409)

125.00 125.00 25.00

Adhesion Tester Dolly’s

Right Angled Adhesion Tester

Adhesion Test Kit Cross Hatch Cutter

www.ndtes.co.uk

Page 72 Back to contents page

[email protected]

METAL ANALYSIS

Niton XL3t GOLDD Technology GOLDD technology stands for Geometrically Optimized Large Drift Detector, and it is the cornerstone of the most significant improvement to XRF analysis since the introduction of the Niton XL3t in 2007, yielding up to a 10x performance gain over this award-winning XL3t analyser. What is the GOLDD advantage? GOLDD technology delivers vast improvements in sensitivity and measurement times – as much as 10 times faster than conventional Si-PIN detectors, and up to 3 times more precise than conventional SDD detectors (SDD). Niton XL3t Series analysers with GOLDD technology provide you with many distinct advantages:

      

Light element detection (Mg, Al, Si, P, S) without helium or vacuum purging. High count rate for lower detection limits and faster analysis. True lab-quality performance in a handheld instrument. Analyse metal alloys. Carry out mining exploration and mapping. Detect soil contaminants. Screen electronics and consumer goods for prohibited substances..

Niton XL2 XRF Analyser The XL2 x-ray fluorescence (XRF) analysers are purpose-built for demanding applications. When speed, accuracy, and reliability count, the combination of strong hardware, smart software, and industry experience helps meet your specific analytical requirements. The XL2 x -ray tube-based analysers provide you with many distinct advantages

      

Rugged design for real-world industrial environments Easy to use - even by non-technical personnel Truly non-destructive test with near instantaneous results From turn on, to trigger pull, to results in just seconds Confident analysis with technology from the industry leader

Further Information, Specifications and Datasheets are Available on Request, Please Call One of Our Offices To Obtain Copies.

www.ndtes.co.uk

Page 73 Back to contents page

[email protected]

THERMAL IMAGINE CAMERA & REPORTING SOFTWARE VisIR® Ti 200 is a cost-effective, real-time thermal imaging camera with many of the features normally found in more expensive systems. The combination of simultaneous visual and infrared images plus voice recording in the VisIR Ti 200 camera dramatically reduces the time taken to collect field data for greater productivity. Its lightweight and rugged (cast aluminium) construction gives maximum durability and ergonomic one handed operation:        

Cost-effective Package Light weight, rugged cast Aluminium construction Four hour battery life DayBrite™ 4” LCD touch screen display Real-time, simultaneous Thermal and Visual imaging Wireless connectivity with VisAIR Wi-Fi long range transmission, iRDA and Bluetooth standards Single hand operation Voice recording

Condition RED® is a powerful SQL Server database system that organizes your assets and workflow for thermography and Predictive Maintenance. Camera based asset information and direct data entry in the field lead to fault and work list reports that are produced in seconds. Condition RED works on your PC in the shop and in your camera in the field to make sure your Preventive Maintenance program runs smoothly and effectively at all times. Condition RED VisIR provides direct integration of camera based thermal inspection and PC data management. Asset reference thermal & visual images and settings are transferred directly from PC to camera for side-by-side field comparison and evaluation of asset status. Instant decision making and entry of asset operating parameters for automated reports and repair schedules.

These Products Are Subject To UK Export Licence And Are Country Specific, Please Contact Us For Further Information.

www.ndtes.co.uk

Page 74 Back to contents page

[email protected]

ACFM CRACK DEPTH MEASUREMENT The AMIGO represents a significant advance in ACFM topside inspection technology. The new instrument has all the advantages of ACFM inspection but in a smaller, lighter package, and with the added benefits of a longer battery life and support for simple array probes. The system provides: Rapid scanning using a hand-held probe. Reliable crack detection and sizing (length and depth). Dual frequency option 5kHz (for ferritic and non-ferrous metals). Rugged site unit, IP54 rated. At least 5 hour operation on one fully-charged battery pack, no need to clean to bare metal. Capable of inspection through thin or thick coatings, Compatible Windows software for ease of operation Full data storage for back-up, off-line view and audit purposes. AMIGO Access to a wide range of geometries using active topside probes. ACFM CRACK MICROGAUGE One man operation in difficult access areas. FEATURES OF THE ATI SYSTEM The new ATI system comprises a master control unit, based around TSC’s rugged, battery-powered Amigo ACFM instrument. This is significantly lighter than the previous system, and also supports use of a higher operating frequency for increased sensitivity on non-ferrous components. The system is controlled by a standard laptop PC, which can be supplied as a rugged version if required.The ATI system has been designed to reduce the requirement for skilled operators and to allow drill string thread inspection data to be available for audit. Having the ability to detect, locate and size defects without the need for operator interpretation. ATI ARRAY PROBES can be used to inspect a variety of pin an box threads and has been used successfully on NC38, NC 46, NC50, 4 ½ IF, 6 5/8 Reg, 7 5/8 Reg and HT40 connectors. Probes for other thread forms or pitches are also available. The ATI system has been designed to reduce the requirement for skilled operators and to allow drill string thread inspection data to be available for audit. Having the ability to detect, locate and size defects without the need for operator interpretation. The Model U31 Underwater ACFM Crack Microgauge represents a significant advance in ACFM subsea inspection technology. The new instrument has all the advantages of ACFM inspection available on other TSC instruments, but in a much smaller, lighter package designed specifically for diver deployment. CRACK DEPTH METER—RMG 4015 Crack depth gauge RMG 4015 measures crack depths on workpieces of iron, ferrous and austenitic steels and can also be used for cracks in copper, brass, aluminium and other non-ferrous metals.It operates due to the potential probe principle: A probe with four spring-loaded and gilded contact pins is positioned across the crack to be measured on the workpiece. A constant alternating current is passed via two of the pins into the workpiece; the two other pins measure the voltage drop across the crack, where the crack depth is derived from. The a.c. of the instrument utilizes the skin effect, which forces the current flow to the surface of the conductor and therefore follows the contour of the crack. The operation and measured value formation are monitored by the microprocessor of the gauge. In addition to common cracks running in most cases perpendicularly to the surface, the real life often shows oblique cracks, where usually it is not the expansion of the cracks which is of interest, but the oblique orientation and the projection with reference to the surface. If you know these measures it can be decided whether the post-treatment of a workpiece with cracks is technically possibly and economically reasonable. Therefore the instrument was equipped with an additional measuring function for the determination of oblique cracks, which permits to determine the inclination of the crack with respect to the material surface.

Full technical specifications and data sheets are available on all of the above products Page 75 Back to contents page

www.ndtes.co.uk

Page 76 Back to contents page

[email protected]

PAGE INTENTIONALLY LEFT BLANK

PAGE INTENTIONALLY LEFT BLANK

PAGE INTENTIONALLY LEFT BLANK

Page 77

www.ndtes.co.uk

Page 78 Back to contents page

[email protected]

www.ndtes.co.uk

Page 79 Back to contents page

[email protected]

www.ndtes.co.uk

Page 80 Back to contents page

[email protected]

www.ndtes.co.uk

Page 81 Back to contents page

[email protected]

ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle The IRIS 9000 employs an ultrasonic immersion pulse echo technique. The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube. The ultrasonic pulses are emitted along a path parallel with the tube axis. These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer. The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness. As the mirror rotates, the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000. There are a 192 readings per revolution and 2400 revolutions per minute. When the probe is advanced along the tube at the optimum inspection rate of 2.54 meters (100") per minute, the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100% coverage. The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers. Outstanding Features * Self calibrating * Extremely accurate (+/-.05mm) (.002") * Tube lengths up to 30 metres (99 Feet) * All tube sizes from 12.2mm (0.48") internal diameter up through 63.5mm (2.5") outside diameter * Documents calibration and inspection data on-site * Probe advanced by encoder drive motor * Menu driven operating system * Operates in metric or imperial measurement * Custom designed for this specific purpose (not pc based) * Reliable and repeatable inspections

NOTE: COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST Page 82 Back to contents page

Pipe Centering Devices

Our centering devices are intended to use as positioning assistance for gamma radiography in pipes of diameter ranges as shown above. The spring pressure of the arms is adjustable. As complementary accessory an appropriately long source terminal is needed, corresponding to the type of gamma ray projector which is used with the centering device. The source terminal can simply be slide through the centering device and be locked by the centre screw. The needed size is up to 15 mm in diameter, the length should extend about 60 mm more than the centering device.

Please see page 5 for pricing.

www.ndtes.co.uk

Page 83 Back to contents page

[email protected]

www.ndtes.co.uk

Page 84 Back to contents page

[email protected]

www.ndtes.co.uk

Page 85 Back to contents page

[email protected]

www.ndtes.co.uk

Page 86 Back to contents page

[email protected]

Endoscopes & Visual Inspection Camera's WOHLER VIS 220 Visual Inspection system

VIS 220 PRO, Price and specification on

LITETEC Video Scope

WÖHLER VIS220 Service Camera The battery driven Wöhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Ø. The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar / 30M. The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87° bends easily. The metric marking on the push rod makes location simple. The tilt-able monitor with 2 m cable provides perfect handling. The system provides a video out socket for documentation purposes. Advantages miniature colour camera head with 26 mm Ø and durable stainless steel housing waterproof up to 3 bar / 30M tilt-able 5.5“ monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 1.5h power status LED video output by RCA socket for documentation complete inspection set in one compact case Complete with case with TFT monitor, 2m monitor cable 20 m flexible push rod with metric marking miniature camera head colour rechargeable battery with charger

Litetec Video Scope Clear imagery/High Resolution Display: 300,000-Pixel colour CMOS Image Sensor Extremely clear vision system: 2.5 dot matrix colour. Inbuilt Lighting system (transmitted using an LED light source.) This means low energy consumption, longevity and high light intensity. Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 9.8mm in diameter, 1500mm usable length, with an insertion-distance scale. Watertight, abrasion-resistant and non-corrosive. Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries, the apparatus can be recharged more than 2,000 times. One battery charge enables 48 hours of use Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras, including side view adapter and a CCD Camera with USB Capture Device. Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination. Kits available in 8mm Diameter, 1 metre cable length 8mm Diameter, 3 metre cable length 5mm Diameter, 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 12.7,, diameter x 270mm length, 90 deg viewing direction Inc. rechargeable battery pack (last up to 3 hours on a single charge) Belt & holster, spare Halogen lamp and carry case For Prices on all Litetec products please call

Page 87 Back to contents page

PIPE WALL / TANK WALL SCANNERS

Pipescan is an easy to use, cost effective, portable magnetic flux leakage inspection system for the detection of random internal corrosion in pipe runs. The latest magnetic material coupled with unique mechanical designs enables coverage of all pipe diameters from 50mm to 2.4 metres with a limited number of scanning heads. Unlike some inspection methods, MFL is not affected by product flowing through the pipe runs so surveys can be carried out both on-line and off-line. Use of Pipescan, with its high probability of detection, to locate actual internal corrosion, coupled with A scan ultrasonic monitoring of corrosion growth, provides a cost effective accurate system for the determination of plant integrity.  Pipe diameters from 50mm – 2.4m  Fixed/adjustable/ Circumferential scan heads available  Separate battery  operated light weight

Scorpion BP Option is a rugged remote access crawler designed to allow cost effective ultrasound thickness measurements on above ground ferro-magnetic structures. The Scorpian system comes in two options, dry coupled (DCP) or irrigated (BP). The remote access crawler comes supplied with an irrigated dual 5MHz transducer fed from a pressurised stainless steel reservoir. Complete with any ultrasonic system, a 30 metre umbilical cable with water feed allows access to the top of the highest storage tank for remote access measurements. Powered by Sitemaster 30 battery pack the system is capable of 8 hours continuous operation on a single charge.  Pressurised water supply  Remote operation with height restrictions 12VDC self contained system

Scorpion DCP Option is a rugged remote access crawler designed to allow cost effective ultrasound thickness measurements on above ground ferro-magnetic structure The remote access crawler uses a unique "Dry Coupled" wheel probe eliminating the need for traditional couplant. This allows the crawler to travel vertically, horizontally or even inverted whilst still fully functional. Compatible with ANY ultrasonic system, a 50 metre umbilical cable allows access to the furthest point of most structures without the need for scaffolding. Powered by the Sitemaster 30 battery pack, the system is capable of 8 hours continuous operation on a single charge.  Unique dry coupled wheel transducer  Remote operation with NO height restrictions  12VDC self contained system

PRICES AND INFORMATION AVAILABLE ON REQUEST

www.ndtes.co.uk

Page 88 Back to contents page

[email protected]

TANKFLOOR SCANNERS / MAPPING UNITS

The FloormapVS2i is latest version of the best selling MFL floor scanner and now comes with up-graded magnets to improve defect detectability and sizing on thicker materials, faster data capture with a custom designed micro controller and all new software. The VS2i contains significant improvements in terms of defect positioning, electronic data processing and software manipulation A new High Specification encoder system has been developed which is electronically calibrated to each individual scanner eliminating errors caused by component tolerances. The new encoder now gives accuracy to within 3 mm on an 8 meter track length and providing it is calibrated on an annual basis will not be effected by normal wear and tear. The ruggedised on-board computer uses touch screen technology for ease of use within the hostile storage tank environment. The custom designed data acquisition software not only captures all the MFL signals but analyses and displays the location and severity of the corrosion in real time.      

Automatic CAD drawing Patch plate design feature Ruggedised touch screen computer Real time data acquisition and analysis Hard copy and electronic report functions Combined defect profiling and amplitude analysis

The Handscan system is designed to compliment the full sized scanners, MFL 2000 and Floormap 2000. Even in such a small configuration the latest generation of permanent magnets enable localised magnetic saturation of the floor area under test. Signals from corrosion, above the operator controllable threshold, are displayed as both a visual and audible alarm. It’s low profile and extendable handle allow scanning in otherwise inaccessible areas of storage tanks such as the shell to annular area and under pipe work or heater coils.    

Latest generation permanent magnet technology Easy to use, cost effective inspection tool Low profile with extendable handle Separate battery operated light weight electronic module

PRICES AND INFORMATION ARE AVAILABLE ON REQUEST

www.ndtes.co.uk

Page 89 Back to contents page

[email protected]

EQUIPMENT AND SYSTEMS CALIBRATION The calibration facilities fully compliment the equipment ranges offered for hire and for sale. Full in house calibration for most instruments Calibration and reporting to national and international standards. General in house Calibration including: Portable ultrasonic flaw detectors (analogue). Portable ultrasonic flaw detectors (digital), Ultrasonic thickness gauges, Eddy Current Units, X ray head output, X ray panel, X-ray Security Systems, Radiation monitors, Bench MPI units, Electromagnets, Permanent Magnets, UV Lamps, Gamma Containers, Gamma Alarms, Windouts, Bay gamma alarms, Pressure/Temperature gauges, Multimeters, Clamp Meters, Holiday Detectors. X-ray systems – portable, static, real time and Security Package Prices for Annual Calibration and Servicing Arranged Calibration of equipment can only be carried out after prior inspection Please telephone to confirm suitability and budget prices

www.ndtes.co.uk

Page 90 Back to contents page

[email protected]

SERVICE / CALIBRATION CHARGES If Your Equipment is Not Listed Please Contact Us For Latest Prices Equipment Ultrasonic Flaw Detectors Ultrasonic Flaw Detectors (Single Bandwidth) Ultrasonic Flaw Detectors (Multi Band) Ultrasonic Flaw Detectors (Multi Bandwidth/Trans Pulse) Ultrasonic Flaw Detectors Thickness Gauges/Meters Thickness Gauges/Meters Thickness Gauges/Meters Thickness Gauges/Meters Rail Trolleys P.A.T units Sound Level Meters Holiday Detectors Electromagnets Permanent Magnets Portable MPI Sets Portable MPI Sets Portable MPI Sets MPI Sets Bench Type MPI Sets Bench Type UV Lamps Black / White Light Meters Black / White Light Meters Clamp Meters Clamp Meters Radiation Monitors Quartz fibre Dosimeter Bleepers Densitometers Paint Coating Meter Paint Coating Meter X-ray Panel X-ray Head Output Test Bay Gamma Alarm 660 Container Windout Eddy Curent Hardness Testers Gauss Meter

Type USM2, USK6, USK7/7B/7S/7GB, USK8/8B, SS100, SS110/M, DSL104, BW TEN11,UFD7A SS120, SS130 , SS125, SS140, SS150S, RS125, EPOCH II/III/B, USK7D, EPOCH L/T, USN50/50L/52,USM22 SS240, USM23/EX/25/35, SONIC 136, Power Scan 400, Sonatest 250S, USN52L/52R/50D, USL32 Master Scan, UFD300/330/350, USD10, USN58L/R/60, Stavely Sonic 1000i, KK58L

Price (£) 105.00 120.00 150.00 195.00

USIP12, Epoch IV/IVB, Epoch XT Standard, DM2, DM3, MX3, DME 26DL, 36DL Comparagauge Nova Precision NRS Type All small equipments

240.00 75.00 85.00 95.00 150.00 P.A.O. 10.00 P.O.A

Most Types Calibration, Refurbishment and PAT Tested Calibration, Refurbishment and Recharged Up to 1200 Amp 1200 – 2000 Amp (Above 2000 Amps POA) Above 2000 Amp Up to 2000 Amp 2000—5000 Amp Not Including New Bulbs Combined Single Up to 1000 Amps Up to 2000 Amps

180.00 95.00 135.00 P.O.A P.O.A P.O.A P.O.A P.O.A 58.00 145.00 90.00 75.00 80.00 59.00 50.00 39.00 40.00 40.00 50.00 P.O.A. P.O.A. P.O.A. 250.00 70.00 P.O.A. 145.00 35.00

Most types Most Types Analogue Digital Including PAT test and safety check Including radiograph In house calibration Full service plus certification (Subject to condition) Full service issue certificate , (Subject to condition) Most types Most types

Prices subject to pre inspection, replacement parts are not included in the above prices

www.ndtes.co.uk

Page 91 Back to contents page

[email protected]

General Terms and Conditions of Hire

No./

As of time and date of hire all plant becomes the responsibility of the hirer with regards to insurance, loss, theft, damage, breakdown (ALL RISKS) All equipment prior to leaving our base is thoroughly inspected to ensure its capability of performing to manufacturers specifications. Any fault not reported within 24 hours will be defined to be the responsibility of the hirer. Minimum hire period one week. No charge will be made for delivery of hand carried articles within a five mile radius of our nominated point of collection but a nominal charge will be made for larger items. All mobilisation costs will be charged as extra. Goods will remain on hire until the day of return to our base. With the exception of wear and tear, all equipment will be thoroughly checked on return to the base and any defects, repairs or damage will be rectified and charged. Advice will be by telephone or fax in the first instance, enabling your personnel to verify equipment damage if necessary. We welcome inspection by clients’ engineer to view damage. Ultrasonic probes, test blocks and leads are classified as consumable items and charged at cost. Any goods returned in a damaged condition will remain on hire for a further period of 14 days after the return date to enable us to carry out repairs. Any equipment damaged, non-functional, broken, lost, stolen or totally written off will remain on hire until its insurance value or repair costs are paid in full, either by the client or his insurer. Note * see insurance value below. No equipment is to be cross hired to a third party without our prior consent. We reserve the right to change the technical specification of any or all of the products offered without prior notice in line with the company’s policy of continuous improvement and increased efficiency. It is our policy to keep sufficient stock to accommodate our client’s need, however, we only offer any article subject to availability. Invoices will be nett monthly and due for payment Strictly 30 Days from the date of invoice. Failure to adhere to our payment terms will result in equipment being recovered from site and charged accordingly. A 6% interest rate per month will be charged on invoices, which have exceeded the 30-day payment period. All prices quoted are exclusive of VAT and MOB costs where applicable. Please note failure to return this hire contract will result in the quoted hire charges being raised by 100% Customer:…………………………………………..

Order No:……………………………………………………

Collection/Delivery:……………………………………………………………………………………………………

Equipment Details Type:………………………………………………..

Make/Model:…………………………………………………

Plant No:……………………………………………

Insurance Value:……………………………………………

Clients Authorised Signature Signing this document is by way of accepting the terms and conditions contained herein. Sign:…………………………………………………

Print::…………………………………………………………

Date:…………………………………………………

Fast Track Hire, photocopy / enlarge, then telephone us to obtain a contract number, complete this page and fax it . Int+ 44 (0) 1933 274113, or scan & e-mail. Please note telephone calls may be recorded

www.ndtes.co.uk

Page 92 Back to contents page

[email protected]

HIRE EQUIPMENT Please ring our office to check availability Other Equipment Is Also Available. Description X – Ray Unit X – Ray Unit X – Ray Unit X – Ray Unit X – Ray Unit UT Set UT Set UT Set

UT Set Thickness Meter Thickness Meter Thickness Meter Thickness Meter Thickness Meter EC Unit Paint Meter Paint Meter Radiation Monitor Wohler VIS 220 Wohler VIS 200pro Holiday Detectors Wet Sponge Detector Paint Inspection Kit Weld Viewers Crack Microgauge Digital Thermometers UV Lamp Hardness Tester Ferrite Meter – Fisher Ferritscope Sound Level Meter MPI Set Electromagnet Pull – Off Tester Gauss Meter Densitometer Tank Scanner Survey Meters

www.ndtes.co.uk

160KV Half Wave 200KV Half Wave 300KV Half Wave 160KV CP 100KV CP USK6/USK7 SS100/UFD7 USN50 Digital Unit Epoch III DL26 with Software DM2 – DM3 etc. Digital MX3 Cygnus 1Intrinsically Safe Unit Cygnus 1 Underwater Safe Unit Hocking 2200, Multi Frequency Eddy Current Unit Digital 256 Type Other Digital/Analogue Inspection camera system Inspection camera system

Whirling Hygrometer, Digital Thermometer, Film Combs, Low Cost Coating Meter, Dewpoint Calculator

Standard 1-8 Weeks 195.00 225.00 375.00 95.00 75.00 130.00 175.00 70.00 75.00 95.00 95.00 250.00 50.00 POA 80.00 145.00 p/w 290.00 p/w 65.00 30.00 75.00 45.00 250.00 30.00 65.00 100.00 145.00

Dynapocket

DDS2 MFL Floormap System Various Models

Page 93 Back to contents page

50.00 65.00 50.00 70.00 70.00 25.00 325.00 p/day 65.00

[email protected]

REFURBISHED EQUIPMENT FOR SALE A large range of serviced and calibrated equipment is always available and is constantly changing. Equipment in most disciplines is usually available.

X-Ray Equipment 100Kv – 320Kv CP Units 100Kv – 300Kv Portables Panoramic / Directional Radiation Monitors Film Processing Units RTR Systems

Gamma Equipment Gamma Containers Windout Systems

Ultrasonic Flaw Detectors – Analogue / Digital Thickness Gauges – All Types

Eddy Current Phase Display Units Meter Display Units

Optical CCTV Systems Fibrescopes

Dye Pen / MPI Dye Penetrant Lines Magnetic Benches Portable Magnetic Benches Field Strength Meters

General Grade Sorters, Gas Detectors, Holiday Detectors, Tachometers

Please contact us with your specific requirements. Equipment can also be sourced. We also purchase equipment, which you may have for disposal

www.ndtes.co.uk

Page 94 Back to contents page

[email protected]

ULTRASOUND VELOCITIES OF SOME COMMON MATERIALS

MATERIAL

ULTRASOUND VELOCITY INCHES / m SEC

METRES / SEC

ALUMINIUM

0.250

6350

BISMUTH

0.086

2184

BRASS

0.173

4394

CADMIUM

0.109

2769

CAST IRON

0.180

4572

CONSTANTAN

0.206

5232

COPPER

0.184

4674

EPOXY RESIN

0.100

2540

GERMAN SILVER

0.187

4750

GLASS, CROWN

0.223

5664

GLASS, FLINT

0.168

4267

GOLD

0.128

3251

ICE

0.157

3988

IRON

0.232

5893

LEAD

0.085

2159

MAGNESIUM

0.228

5791

MERCURY

0.057

1448

NICKEL

0.222

5639

NYLON

0.102

2591

PARAFFIN

0.087

2210

PLATINUM

0.156

3962

PLEXIGLASS

0.106

2692

POLYSTYRENE

0.092

2337

PVC

0.094

2388

QUARTZ GLASS

0.222

5639

RUBBER, VULCANISED

0.091

2311

SILVER

0.142

3607

STEEL, MILD

0.233

5918

STEEL, STAINLESS

0.223

5664

STELLITE

0.275

6985

TEFLON

0.056

1422

TIN

0.131

3327

TITANIUM

0.240

6096

TUNGSTEN

0.210

5334

WATER

0.058

1473

ZINC

0.166

4216

www.ndtes.co.uk

Page 95 Back to contents page

[email protected]

www.ndtes.co.uk

Page 96 Back to contents page

[email protected]

TARIFF NUMBERS

Below are suggested Tariff numbers : you should check to ensure that those below are current. We make no guarantees that these are correct but they have been used previously PRODUCT TYPE

NOMENCLATURE TARIFF NUMBER

Cassettes, screens

90229010

Bleepers & dose meters

90301000

Couplant

38249097

Flat X-ray unexposed film

37011090

Gamma Ray projectors

28443069

Hardness testers

90241090

Iridium 192 radioactive source

28444080

Magnetic Flux Indicators

85394910

Magnets Electro

85059010

Magnets Permanent

85051100

Porosity instruments

90278090

Roll X-ray unexposed film

37021000

Survey meters

90301000

Ultrasonic Accessories

90249000

Ultrasonic Flaw detectors / Thickness gauges

90241090

UV lamps

85394910

Weld gauges

85159000

X-Ray and Radiographic Accessories

90229090

X-Ray Equipment

90222900

www.ndtes.co.uk

Page 97 Back to contents page

[email protected]

OTHER SAFETY AND DETECTION DEVICES Gas Detection Tubes

Cable Location

We sell a full range of Draeger, Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours. Ideal for compliance with COSHH legalisation and emission monitoring.

Metal detectors and Cable Avoidance Tools with a range of depths available, as well as innovative ground radar products.

Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously. Models can include up to 5 gases at once, data logging and integrated pumps for remote sampling.

Air Movers & Ventilation We offer a selection of air-moving equipment suitable for all environments; all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs.

Breathing Apparatus

Airline

A range of breathing apparatus for use when working in or escaping from hazardous environments where fire, smoke or toxic gases may be present.

Airline trolley systems are ideal for use where extended duration of BA is required. Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths.

Lighting

Tripods

Our range of ATEX approved safety torches, hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units.

Lightweight, easy to erect tripods with galvanised tubular aluminium, and telescopic legs, designed for strong and stable recovery.

Chemical Suits

Fall Arrest

Available in a range of materials and styles, including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety.

A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required. Working at heights equipment also available.

Harnesses

Road Furniture

A comprehensive stock of harnesses are available for working at heights as well as for confined space entry / rescue.

We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems.

www.ndtes.co.uk

Page 98 Back to contents page

[email protected]

Notes

www.ndtes.co.uk

Page 99 Back to contents page

[email protected]

Page 100

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF