Multicast Support in MPLS-TP

January 11, 2018 | Author: gautamckumar | Category: N/A
Share Embed Donate


Short Description

Download Multicast Support in MPLS-TP...

Description

Multicasting

TN705/725 basic L2 Based Multicast • • • • • •

Multicast stream is replicated at L2 at each TN725 and TN705 Multicast using H-VPLS model Traffic route: L2 PW LSP  PW  L2 Only one copy stream occupies th bandwidth the b d idth off th the lilink k L2 IGMP proxy and snoopy supports the multicast application Protection will be provided by MPLS OAM

Multicast source

IPTV Feed

Major Ring

Minor Ring

Multicast Traffic

Multicast protection (1) Fiber cut/path failure The PW/LSP protection will active when fiber cut or path failure are detected. The switch time will be less than 50ms.

(3)

×

Multicast source

A

(2) Node Failure Each TN705/725 will receive multicast traffic both from primary path and secondly path. If they can not receive the traffic from primary path (direction), (direction) it will switch to secondly path (direction). The switch time will be seconds.

B (1)

×

×

(2)

((3)) Source Failure The VRRP is running between two multicast sources (A) and (B). The center site TN705/725’s primary and secondly multicast traffic get from both source (A) and source (B). The traffic will get from (B) instead of source (A) after multicast sources are switched. The rest TN705/725 will not switch. The switch time will be seconds. seconds (VRRP)

Multicast Traffic (primary) Multicast M lti t Traffic T ffi (Secondly) NGN equipment DSLAM Router

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF