Mtcre: Static Routing

 

 MikroTik Certificat Certification ion Exam Sample Sample Questions Questions     

MTCRE Static Routing

1.

The There re a are re two two rrout outes es in in th the e ro routi uting ng tabl table: e: •

0 dst-addr=10.1.1.0/24 dst-addr=10.1.1.0/24 distance=10 gateway=10.10.10.10 gateway=10.10.10.10

•

dst-addr=10.1.1.4/30 dst-addr=10 .1.1.4/30 distance=20 gateway=10.20.20.20 gateway=10.20.20.20

Which gateway will be used to send packet with destination IP address 10.1.1.6?

2.

A.

10.20.20.20

B.

both

C.

10.10.10.10

D.

No None ne,, b bec ecau ause se dist distan ance ce is >= >=10 10

Which static-rou static-route te rule rule wil willl have priority priority fo forr des destinat tination ion 192.168 192.168.0.18 .0.18?? A.

3.

4.

dst-address=192.168.0.0/26 dst-address= 192.168.0.0/26 gateway=192.168.1.1 gateway=192.168.1.1 distance=3

 

B.

dst-addr dst-address= ess=192.1 192.168.0. 68.0.0/28 0/28 gateway=1 gateway=192.16 92.168.3. 8.3.1 1 distanc distance=1 e=1

C.

dst-addr dst-address= ess=192.1 192.168.0. 68.0.0/26 0/26 gateway=1 gateway=192.16 92.168.2. 8.2.1 1 distanc distance=2 e=2

D.

dst-addr dst-address= ess=192.1 192.168.0. 68.0.0/28 0/28 gatewa gateway=192 y=192.168. .168.4.1 4.1 distanc distance=5 e=5

E.

dstdst-addr address= ess=192.1 192.168.0. 68.0.0/24 0/24 gateway=1 gateway=192.16 92.168.3. 8.3.1 1 distance= distance=1 1

MikroTik MikroTik rou router ter needs needs to forward forward IP-packet IP-packet ta target rgeted ed to 11.12 11.12.4.5. .4.5. Router Router routing routing table table has 3 routes, routes, •

1. dst-address=11.12.4.0/24, dst-address=11.12.4.0/24, distance=10, gateway=1.1.1.1

•

2. dst-address=11.12.4.0/28, dst-address=11.12.4.0/28, distance=20, gateway=1.1.1.2.

•

3. dst-address=0.0.0.0/0, distance=1, gateway=1.1.1.254. gateway=1.1.1.254. Which of the gateways will router select?

A.

2

B.

3

C.

Nowhere.

D.

Hos Hostt will will get get "d "dest estina inatio tion n host host un unrea reacha chabl ble". e".

E.

1

The There re a are re two two rrout outes es in in th the e ro routi uting ng tabl table: e: •

0 dst-addr=10.1.1.0/24 dst-addr=10.1.1.0/24 gateway=5.5.5.5

•

1 dst-addr=10.1.1.4/30 dst-addr=10.1.1.4/30 gateway=5.6.6.6

Which gateway will be used to get to the IP address 10.1.1.6?  

A.

both - half of the traffic will be routed through one gateway, half through the other

 B.

 

 C.

 

5.6.6.6 5.5.5.5

  SMK Daarut Tauhid 

Page Page   1

 

Certification ion Exam Sample Sample Questions Questions     MikroTik Certificat  

D. the required route is not in the routing table  

5.

Consider Consider tthe he followi following ng out output put fr from om the ccomman ommand d "/ip add address ress p print" rint":: Flags: X - disabled, I - invalid, D - dynamic # ADDRESS

NETWORK

BROADCAST

1 10.10.10.1/32

10.10.10.2

0.0.0.0

pppoe-1

2 10.10.10.1/32

10.10.10.3

0.0.0.0

pppoe-2

INTERFACE

This configuration is invalid because of the duplicate IP's. (TRUE/FALSE)

6.

Select Select tthe he cor correc rectt stat stateme ements nts about about routi routing ng marks marks:: A. each packet can have more than one routing mark B. can be be assigned assigned by IP fire firewall wall mang mangle le chains chains iinput nput and outpu outputt  

C.

a packet packet with a routing routing mark mark is ignor ignored ed by main routing routing ttable able if th there ere is at least least one route for the the routing routing mark

D.

check-ga check-gatewa tewayy opti option on is not not com compati patible ble with with routin routing-ma g-mark rk

7.

/ip route can have DS flags flags simultane simultaneousl ously. y. (TRUE/F (TRUE/FALSE) ALSE)

8.

If route route type is 'black 'blackhole hole',', then packet packetss to the destinat destination ion network network are are going going to be

9.

A.

drop dropped ped o on n this router router and and ICMP ICMP mes message sage w will ill be be sent b back ack to the the sou source rce

B.

se sent nt bac back k tto o the the so sour urce ce

C.

sen sentt back back to the previ previous ous router router

D.

drop droppe ped d on on tthi hiss rou route terr

Define Define a rout routing ing lloop oop ((choos choose e th the e most prec precise ise d descri escription ption)) A.

sit situat uation ion where where tthe he T TTL TL of of tthe he p pack acket et e expi xpires res

B.

Sit Situat uation ion wh where ere th the e pac packet ket does does not not reach reach it it\'s \'s dest destina inatio tion n

C.

situ situation ation where where th the e pack packet et is routed routed thro through ugh th the e same sequenc sequence e of routers routers until until the TTL ex expire piress

D.

situ situation ation where where the packet packet is rout routed ed through through the ssame ame rrouter outer twice twice

10. Which routing table is u used sed to ap apply ply recursiv recursive e routing at MikroTik Route RouterOS rOS A.

It is possible possible in all all the routing routing ttable abless install installed ed iin n a route routerr

B.

It iiss n no ot po possible

C.

It is is on only ly pos possi sibl ble e on the the x86 x86 pla platf tfor orm m

D.

It is is on only ly poss possibl ible e in the main main ro routi uting ng ttabl able e/

11. The def default ault val value ue of 'target-s 'target-scope' cope' ffor or a static rou route te is: A.

255

B.

10

C.

30

D.

1

SMK Daarut Tauhid   

Page Page   2

 

Certification ion Exam Sample Sample Questions Questions     MikroTik Certificat

Page Page   3

 

12. When using the "check "check gateway" ffunction unction in cre creating ating a route, the the following p protocols rotocols can be utilized utilized to ensur ensure e the gateway address is reachable (choose all correct answers): A.

UDP

B.

MNDP

C.

ARP

D.

ICMP

13. To assign specific traffic traffic to a route – traffic must be identified identified by a routing mark. Ea Each ch packet can only have one routin routing g mark. (TRUE/FALSE)

14. Which route will will be used to re reach ach host 192.168.1.55? /ip route add disabled=n disabled=no o distance=1 dst-address=192.168 dst-address=192.168.1.0/24 .1.0/24 gateway=1.1.1.1 add disabled=no distance=1 dst-address= dst-address=192.168.1.0/25 192.168.1.0/25 gateway=2.2.2.2 add disabled=no disabled=no distance=1 dstaddress=192.168.0.0/16 dstaddress=192. 168.0.0/16 gateway=3.3.3.3 A.

Rout Route e via via gate gatewa wayy 3.3 3.3.3 .3.3 .3

B.

Rout Route e vvia ia gate gatewa wayy 2 2.2 .2.2 .2.2 .2

C.

Rout Route e via via gate gatewa wayy 1.1 1.1.1 .1.1 .1

15. Router has two gateways gateways to reach a certain certain network both with check gateway gateway activated. Choose Choose the option you can can use to control active and backup gateway. A.

Routing mark

B.

Interface

C.

Scope

D.

Distance

16 16.. EC ECMP MP pr prov ovid ides es:: A.

pe perr src addr address ess load load bala balanci ncing ng to m mul ultip tiple le gatew gateways ays

B.

pe perr src/dst src/dst ad addr dress ess p pair air load load bala balanci ncing ng to multi multipl ple e gatewa gateways ys

C.

pe perr connec connectio tion n load load ba balan lancin cing g to mu multi ltiple ple gate gateway wayss

D.

pe perr packe packett loa load d ba balan lancin cing g to m mult ultip iple le g gate ateway wayss

17. When adding a static route, you mu must st always ensure that that you add both the gateway and the interface. (TRUE/FALSE)

18. If we cha change nge TT TTLL to 2 in mang mangle le chain chain preroutin prerouting g A.

pa pack cket et will will not not be be ffor orwa ward rded ed

B.

pac packet ket wi will ll al alway wayss reac reach h its its de desti stinat nation ion

C.

pac packet ket will will be forw forward arded ed o onl nlyy to next next L3 d devi evice ce

D.

pac packet ket will will be be fo forwa rwarde rded d to th the e next next 2 L3 devi devices ces

19. If 'check-gateway' 'check-gateway' is enabled for an ECMP route and one of the gateways is unreachable, unreachable, then then  

 A. the ECMP route becomes inactive B. ECM ECMP P is going going to sen send d packets packets to all gate gateways ways e even ven if one is unreachab unreachable le C.

the u unreac nreachabl hable e gat gateway eway is not going going be used in Round Round Robin Robin a algor lgorithm ithm

  SMK Daarut Tauhid 

 

Certification ion Exam Sample Sample Questions Questions     MikroTik Certificat

Page Page   4

 

20. It is possible possible to chang change e the Time To Live in Firewall M Mangle. angle. (TRUE/FALSE)

21. When sending out out an ARP reques request, t, an IP host is ex expecting pecting what k kind ind of address address for an answer? answer? A.

VLAN ID

B.

802.11g

C.

IP a ad ddress

D.

MAC Address

22. Consider the following following diagram. diagram. We want to communicate from a device on LAN1 LAN1 to a device on LAN2. LAN2. Assuming that all necessary configurations are already included on R2, which of the following configurations in R1 would enable this communication?

A.

/ip rrout oute e add dst-a dst-add ddres ress=0 s=0.0. .0.0.0 0.0/0 /0 gatew gateway= ay=Eth Ether1 er1

B.

/ip route add dst-a dst-addr ddress=1 ess=192.1 92.168.1. 68.1.0/24 0/24 gate gateway=1 way=192.16 92.168.99. 8.99.2 2

C.

/ip route add dst-a dst-addr ddress=1 ess=192.1 92.168.0. 68.0.0/24 0/24 gate gateway=1 way=192.16 92.168.0.1 8.0.1

D.

/ip ro route ute add dst-a dst-addr ddress=1 ess=192.1 92.168.1. 68.1.0/24 0/24 src-ad src-addres dress=192 s=192.168 .168.0.0/ .0.0/24 24 gateway=1 gateway=192.1 92.168.99 68.99.2 .2 E.  /ip route add dst 

address=0.0.0.0/0 address=0.0.0 .0/0 gateway=192.168 gateway=192.168.99.2 .99.2

23. Mangle Routing ((routing-mark) routing-mark) is possib possible, le, by using chains: A.

input a an nd ou output

B.

forw forwar ard da and nd po post stro rout utin ing g

C. D.

pr prer erou outi ting ng and and outp output ut forwa orward rd an and do ou utput tput

E.

pr prer erou outi ting ng and and fo forw rwar ard d

24. There are four four routes in the routing table. Host 10.10.10.10 becomes becomes unreachable. unreachable. •

1 dst-addr=0.0.0.0/0 dst-addr=0.0.0.0/0 gateway=11.11.11.11 gateway=11.11.11.11

•

2 dst-addr=20.20.20.0/24 dst-addr=20.20.20.0/24 gateway=10.10.10.10 gateway=10.10.10.10 check-gateway=ping check-gateway=ping

•

3 dst-addr=30.30.30.0/24 dst-addr=30.30.30.0/24 gateway=10.10.10.10

•

4 dst-addr=30.30.30.0/25 dst-addr=30.30.30.0/25 gateway=13.13.13.13 gateway=13.13.13.13 check-gateway=ping check-gateway=ping

Which gateway is used to get to the IP address 30.30.30.145? A.

10.10.10.10

B.

13.13.13.13

C.

11.11.11.11

D. None. Packets to that host will be dropped until host 10.10.10.10 becomes active again.  

25. /ip rroute oute confi configura guration tion o on n rout router, er,  /ip route add gateway=192.168.0.1 gateway=192.168.0.1 SMK Daarut Tauhid    •

 

Certification ion Exam Sample Sample Questions Questions     MikroTik Certificat

Page Page   5

  •

 /ip route add dst-address=192.168.1.0/24 dst-address=192.168.1.0/24 gateway=192.168.0.2 gateway=192.168.0.2

•

 /ip route add dst-address=192.168.2.0/24 dst-address=192.168.2.0/24 gateway=192.168.0.3 gateway=192.168.0.3

 /ip route add dst-address=192.168.3.0/26 dst-address=192.168.3.0/26 gateway=192.168.0.4 gateway=192.168.0.4 Router Router needs to send packets to 192.168.3.240. 192.168.3.240. Which gateway will be used? •

A.

192.168.0.1

B.

192.168.0.2

C.

192.168.0.4

D.

192.168.0.3

26. A MikroT MikroTik ik Router Router has the foll followin owing g confi configur guration ation •

•

 /ip address add addre address=1.1.1.2/30 ss=1.1.1.2/30 interface=ether1 interface=ethe r1 add address=2.2.2.2/30 address=2.2.2 .2/30 interface=ether2 interface=ether2 add address=192. address=192.168.10.1/24 168.10.1/24 interface=ether3  /ip firewall firewall mangle add action=markconnection chain=prerouting chain=prerout ing dstport=80 newconnectionmark=web_c passthrough=yes protocol=tcp add action=markrouting chain=prerouting action=markrouting chain=prerouting connection-mark=web_c connection-mar k=web_c newroutingmark=web passthrough=no

•

•

 /ip firewall firewall nat add action=masquerade action=masquer ade chain=srcnat outinterface=ether3  /ip route add gateway=1.1.1.1 add gateway=2.2.2.2 routing-mar routing-mark=web k=web

What can be said about the Web Access (port 80) by a customer connected at ether3 interface with IP 192.168.10.2/24, gateway 192.168.10.1? A.

The ccust ustome omerr wi will ll acces accesss the W Web eb using using the the gatew gateway ay 2. 2.2.2 2.2.2 .2

B.

The Cu Customer stomer will access access the W Web eb by E ECMP, CMP, b byy using both g gatew ateways ays 1.1.1.1 1.1.1.1 and and 2.2.2.2 2.2.2.2

C.

The Custom Customer er is unable unable to a acce ccess ss the Web. Web.

D.

The customer customer will access access the the We Web b us using ing the gateway gateway 1.1.1 1.1.1.1 .1

27. When creating a route, it is possi possible ble to specify tthe he gateway to a network network even if the gateway is not directly directly connected by using recursive next-hop resolving from an existing route. (TRUE/FALSE)

28. Routing table has has several routes w with ith the same gateway. gateway. If 'check-gateway' 'check-gateway' is enab enabled led for one of the routes, and the gateway becomes unreachable, then A.

onl onlyy this this one rou route te wou would ld be becom come e inac inactiv tive e

B.

all routes routes w with ith tthe he sa same me ga gatew teway ay would would become become iinac nactiv tive e

C.

the 'ch 'checkeck-gate gateway' way' ffeatur eature e would n not ot work at all, all, sin since ce the same same gate gateway way is used used for mo more re than one one route route

29. routi routing ng tab table le has follo following wing entries: entries: •

0 dst-address=10.0.0.0/24 dst-address=10.0.0.0/24 gateway=10.1.5.126

SMK Daarut Tauhid   

 

 MikroTik Certificat Certification ion Exam Sample Sample Questions Questions   

Page Page   6

  •

1 dst-address=10.1.5.0/24 dst-address=10.1.5.0/24 gateway=10.1.1.1

•

2 dst-address=10.1.0.0/24 dst-address=10.1.0.0/24 gateway=25.1.1.1

•

3 dst-address=10.1.5.0/25 dst-address=10.1.5.0/25 gateway=10.1.1.2

Which gateway will be used for a packet with destination address 10.1.5.126? A. 10.1.1.2  

B. 25.1.1.1  

C.

10.1.5.126

D.

10.1.1.1

OSPF

1.

Only OSPF OSPF rout routes es distr distribut ibuted ed as "externa "external" l" can be fil filtered tered w with ith routing routing fil filters ters (TRUE/FALS (TRUE/FALSE) E)

2.

OSP OSPFF start startss worki working ng o on n th the e router router as so soon on as as

3.

4.

5.

A.

at le least ast one one ar area ea is is speci specifi fied ed in the ospf ospf are area a menu menu

B.

at le least ast one one IP net networ work k is a assi ssign gned ed iin n th the e ospf ospf ne netwo twork rk me menu nu

C.

at le least ast one one in inter terfac face e is de defin fined ed in the the os ospf pf inter interfac face e men menu u

D.

the routin routing g packa package ge iiss en enab abled led on tthe he rrout outer er

A MikroTik system administrator administrator imp implemented lemented O OSPF SPF Routing Routing protoc protocol ol in the network. But realized realized that he has a static route on the routers. What can be done to make the static route work as a failover whenever the dynamic routing protocol fails? fails? A.

He sshould hould use "netw "netwatch" atch" to trigge triggerr sta static tic routes routes whenever whenever OSPF fails fails

B.

He sho should uld ma manual nually ly disabl disable e the st static atic rroutes outes and and ena enable ble them them wheneve wheneverr OSP OSPFF fails fails

C.

He sshould hould incr increase ease the administr administrative ative distance distance of the the static static route route

D.

Dele Delete te all stati staticc routes routes be becaus cause e ther there e is no way for for it tto o work work with OSPF OSPF

An OSPF area area consists of 15 route routers rs connected in 6 different different broadcast broadcast networks. How How many Designated Designated route routers rs there will will be in in the area? A.

6

B.

1

C.

0

D.

15

Which is the the correct correct way way to set set a co comment mment in a O OSPF SPF dynamic dynamic rroute: oute: A.

It ca can n be conf configu igured red by sett setting ing up up Rou Routin ting g fi filte lters rs

B.

A co comme mment nt ccann annot ot b be e co confi nfigu gured red in a dynami dynamicc ro route ute

C.

It ca can n be conf configu igured red manual manually ly in the Routin Routing g Table Table

SMK Daarut Tauhid   

 

Certification ion Exam Sample Sample Questions Questions     MikroTik Certificat

Page Page   7

 

6.

What is the minimu minimum m configura configuration tion a network network administ administrator rator needs needs to do on a MikroTik MikroTik rout router er to enable enable OSPF? OSPF? A.

Not Nothin hing; g; OSPF OSPF insta instance nce ccan an run run wi with th no cconf onfigu igurat ration ion

B.

Both interfac interface e an and d network network must be adde added d to OSP OSPFF co config nfigurat uration ion

C.

Add an iinte nterf rface ace to to OSP OSPFF inter interfac face e co confi nfigu gurat ration ion

7.

In OSPF settings, the NBMA N Neighbor eighbor setting can be used to improve the stabili stability ty of O OSPF SPF across across wireless wireless links. (TRUE/FALSE)

8.

It is possibl possible e to have have OSPF OSPF and B BGP GP con configu figured red on the the same same router? router? (YES/NO) (YES/NO)

9.

In this ospf network (see (see diagram) diagram),, we want to re-distri re-distribute bute routes ffrom rom R5 to the the R3 router router.. Where do I have to create create a virtual virtual link?

A.

Ther There e is no n nee eed d fo forr a vvir irtu tual al-l -lin ink k

B.

Between R1 and R4

C.

Between R R5 5a an nd R3 R3

D.

Between R R4 4 an and R R2 2

10. Which of the following following condition conditionss have to be fulfilled fulfilled for two two routers on one eth ethernet ernet segment to be become come ospf neig neighbors? hbors? A.

Ne Netw twor orkk-ty type pe must must be th the e ssam ame e

B.

Hell Hello o an and dd dea ead d tim timer erss mu must st b be e th the e same same

C.

MTU mu must st be the the sa same me

D.

Cost ost m mu ust be tth he ssa ame

11. You hav have e a router router with th the e following following IIP P add addresse resses: s: •

ether1: 10.40.1.1/24

•

ether2: 10.250.1.1/30

•

ether3: 10.251.1.1/30

•

wlan1: 10.50.1.1/30

•

wlan2: 10.50.2.1/30 You have a customer directly connected to ether2, and another customer directly connected to ether3. Your wireless radios are used for wireless connectivity to two different towers, and ether1 goes to another wireless access point for other subscribers. SMK Daarut Tauhid   

 

 MikroTik Certificat Certification ion Exam Sample Sample Questions Questions   

Page Page   8

 

You need all of the subnets distributed across your OSPF Network. You need to configure OSPF to talk on this router, what would be the best configuration. A. B.

Set OSP OSPFF Networks Networks to 10.4 10.40.1.0 0.1.0/24, /24, 10.250. 10.250.1.0/ 1.0/30, 30, 10.251.1. 10.251.1.0/24 0/24,, 10.50.1.0/ 10.50.1.0/30, 30, and 10.50.2. 10.50.2.0/30 0/30 set distri distribu butete-def defaul ault=a t=alwa lwaysys-typ type-1 e-1

C.

Set Set O OSP SPFF net netwo work rkss to to 0.0 0.0.0 .0.0 .0/0 /0

D.

Set OSP OSPFF Networks Networks to 10.40.1.0/2 10.40.1.0/24, 4, 10.250.1.0/ 10.250.1.0/30, 30, 10.251.1.0 10.251.1.0/30, /30, 10.50.1 10.50.1.0/30 .0/30,, and 10.50.2.0/ 10.50.2.0/30 30

E. F.

Set Set OP OPSF SF netw networ orks ks tto o 10.0 10.0.0 .0.0 .0/8 /8 on only ly Set OSP OSPFF netwo networks rks,, to 10. 10.50. 50.1.0 1.0/30 /30,, 10 10.50 .50.2. .2.0/3 0/30 0

G.

Set Set Di Dist stri ribu bute te-C -Con onne nect cted ed=y =yes es

H.

Set Set Et Ethe hern rnet et 2 an and d 3 to to pass passiv ive e mode mode

I.

se sett dist distrrib ibu utete-st stat ate= e=ye yess

J.

Set Set E Eth ther erne nett 1 1,, 2, 2, and and 3 tto o pas passi sive ve mode mode

12. New area OSPF OSPF \"area1\" has b been een created. W What hat could be used as a valid area id? A.

 

1.2.3.4

B.

0.0.0.1

C.

0.0.0.0

13. True or False: BGP BGP can be used used for internal routing, using an internal AS n number. umber. (TRUE/FALSE)

14. Which type of ip rou route te is the h highest ighest priority priority for rout routing ing decision ? A.

OSPF Route

B.

BGP Route

C.

Static R Ro oute

D.

Co Conn nnec ecte ted d Rout Route e

15. In OSPF interface interface configu configuration ration what effe effect ct will a “passive=yes” “passive=yes” option have have on a specific specific interface ? A. It will prevent routes learned through the interface from being listed in the routing table.  

B.

It will will action action a mi mirror rroring ing o off all all rou routing ting upgrades upgrades to that interface

C.

It will will preven preventt all OSPF traf traffic fic through through tthat hat iinter nterface face

D.

It will will preven preventt all traffic traffic tthroug hrough h that that in interf terface ace

VLAN

1.

VLAN is an implementation implementation of the 802.1Q VLAN protocol protocol by the MikroT MikroTik ik RouterOS. RouterOS. It allows allows you to have multiple Virtual LANs LANs on a single ethernet or wireless interface, giving the ability to segregate LANs efficiently. How many different vlans are possible on a single ethernet port? A.

4096

SMK Daarut Tauhid   

 

 MikroTik Certificat Certification ion Exam Sample Sample Questions Questions   

Page Page   9

 

2.

B.

Only one

C.

63

D.

4095

A network administrator has 2 vlans /int /interface erface vlan vlan add name=vlan1 vlan-id=10 vlan-id=101 1 interface=ether1 interface=ether1 add name=vlan2 vlanid=102 interface=vlan1 Any packet sent over "vlan2" interface … A.

wil willl ha have ve on one e vl vlan an tag tag added added to et ether hernet net h head eader er - ""101 101""

B.

wil willl have have on one e vl vlan an tag tag added added to et ether hernet net h head eader er - ""102 102""

C.

Wron Wrong g con configu figurati ration on be because cause it is not p possib ossible le to h have ave a vlan vlan over over anothe anotherr vla vlan n

D.

will have two vlan vlan ta tags gs added added to to ethe ethernet rnet heade headerr - "1 "101" 01" and and "102" "102"

E.

wil willl not not go throug through h at a all ll bec becaus ause e vlan1 vlan1 will will drop drop it

3.

It is possible possible to create a config configurat uration ion wher where e VLAN and PPTP PPTP interfaces interfaces are bridged bridged togethe together. r. (TRUE (TRUE/FALSE) /FALSE)

4.

How m many any V VLAN LAN hea header derss do IIEEE EEE 8 802. 02.1Q 1Q perm permit? it? A.

1

B.

more than 2

C.

unlimited

D.

2

Tunneling 

1.

Router A and B are b both oth running as PPPoE servers on d different ifferent broadcast broadcast domains domains of your network. Is it possible to set Router A to use "/ppp secret" accounts from Router B to authenticate PPPoE customers? (YES/NO)

2.

3.

4.

To route two private private networks together over a public public routed network (there (there are multiple hops between between the gateway routers routers of the private networks), you can use the following tunnel types (mark all that are correct): A.

PPTP

B.

PPPOE

C.

L2TP

D.

IPIP

E.

EOIP

Whi Which ch on ones es of th these ese ar are e Poi Pointnt-toto-Poi Point nt addre addresse sses? s? A.

add addres ress=1 s=10.0 0.0.0. .0.1/2 1/24 4 net networ work=1 k=10.0 0.0.0. .0.0 0

B.

add addres ress=1 s=1.1. .1.1.1 1.1/32 /32 net networ work=1 k=10.0 0.0.0. .0.0 0

C.

add addres ress=1 s=10.0 0.0.0. .0.1/3 1/32 2 net networ work=1 k=10.0 0.0.0. .0.0 0

D.

add addres ress=1 s=10.0 0.0.0. .0.1/3 1/32 2n netw etwork ork=10 =10.0. .0.0.2 0.254 54

The ccorr orrect ect o ord rder er fo forr PPPO PPPOE E dis discov covery ery stag stage e is

SMK Daarut Tauhid   

 

 MikroTik Certification Sample Questions  Questions  Certification Exam Sample

Page Page   10

 

A.

Requ Request, est, Offe Offer, r, Init Initializ ialization ation and Sess Session ion confirmat confirmation ion

B.

Req Reques uest, t, Initia Initializ lizati ation, on, Se Sessi ssion on con confir firmat mation ion and and Off Offer er

C.

Initia Initializ lizati ation, on, Se Sessi ssion on con confir firmat mation ion,, Request Request and Offe Offerr

D.

Initi Initializa alization, tion, Off Offer, er, Request Request and Sess Session ion confirmat confirmation ion

5.

When you set set up a L2TP serv server er in Mikr MikroTik oTik RouterOS RouterOS,, is it manda mandatory tory to configur configure e an IPSec polic policy? y? (YES/NO) (YES/NO)

6.

When addin adding g a user to your your loca locall ppp se secrets crets/pp /ppp p profiles profiles da databa tabase, se, it is p possib ossible le to A.

All Allow/ ow/de deny ny use use of of mo more re than than one login login b byy this this user user

B.

All Allow ow llogi ogin n by p ppp ppoe oe and and pptp pptp,, bu butt den denyy log login in by by l2tp l2tp

C.

Deny services services (lik (like e telnet) telnet) only for this this user user o orr for for one grou group p of users users

D.

Set max vvalue aluess for total trans transferr ferred ed bytes bytes ((upup- and down download) load)

E.

Al Allo low w onl onlyy p pp ppoe lo log gin

7.

A MikoTik PPPoE PPPoE Server can be u used sed only w within ithin a broadcast broadcast doma domain, in, that is is,, users can not run PPPoE PPPoE protoc protocol ol with a server if there is a router between the customer and that PPPoE server. (TRUE/FALSE)

8.

To securel securelyy br bridge idge together together 2 remote remote networ networks ks you can use

9.

A.

PPTP BCP

B.

EoIP ov over P PP PTP

C.

PPPoE over EoIP

D.

PPTP over EoIP

Settings Settings in /ppp sec secret ret user dat databas abase e override override corres correspond ponding ing /pp /ppp p profi profile le setti settings. ngs. (TRUE/FALSE) (TRUE/FALSE)

  SMK Daarut Tauhid