CLINICAL CHEMISTRY ANALYZER
CLINICAL CHEMISTRY ANALYZER
PRODUCTIVITY
Test Methods
Programming Operator interface
- stores up to 400 test methods - stores up to 5 profiles - operation by touch screen - patient oriented analysis sequence
Minitecno is a sophisticated and smart clinical chemistry
- touch screen (colour) - Embedded manager software - English language (optional multilanguage)
patient by patient or method by method and the user
analyzer with a built in colour touch screen monitor, with the possibility to connect an external USB keyboard. The patient oriented analysis sequence allows the user to work friendly software based on Windows XP® is really easy to use. This means that Minitecno takes just few minutes to
MEASUREMENT SYSTEM
Photometric system
Aspiration
- quartz halogen lamp - 340/405/510/546/578/620nm plus two free positions - mono or bichromatic measurement - optical linearity to 3 absorbance units (1 cm) - photodiode detector (320-1000 nm) - 35 µl glass flow cell - temperature 25°C, 30°C, 37°C T. amb. - (peltier module) - internal peristaltic pump
be ready to help you in the laboratory. Minitecno can perform end point, kinetic, fixed time, bichromatic, differential sample blank methods. 35 micro-liters integrated glass flow cell, with stabilized temperature through peltier system (25 – 37°C), is the perfect solution to have the possibility to use between 350
DATA COLLECTION AND MANAGEMENT
CALIBRATION AND QUANTITY CONTROL
- end point, kinetic rates, initial rates, bichromatic, sample blank
and 500 micro-liters per test.
Measuring time
- programmable from 1 to 998 seconds
memory, and all the methods are fully programmable by
Delay time
- programmable from 1 to 998 seconds
Warm up time
- < 5 minutes
Blanking
- automatic zero setting
24 months warranty is the expression of the quality of
Test results
- graphical plot of all measured points - retrieve stored results by test or by patient
Minitecno. Of course produced by I.S.E.
Calibration modes
- standard, multi standard, factor, linear, polynomial, quadratic and spline - Levey-Jennings plots (30 or 90 days)
Analytical modes
QC PHYSICAL CHARACTERISTICS
Dimensions Weight Electric requirements Regulatory approvals
- 230x260x400 mm (WxHxD) - 9 kg - line voltage 100-240 V (+/- 10%) line frequency 50/60 Hz CE marked, 98/79 EC compliance
All the calibration curves, linear and not linear, are stored in the user. The printer on board allows the user to print the graphical plot of all measured points.
ISE S.r.l. Via delle Driadi, 45 00133 Rome – ITALY Tel. + 39 06 20610289 Fax + 39 06 2018131
www.logotech-ise.com e-mail
[email protected] I.S.E. s.r.l. – MINITECNO 01/09 For continous improvement in the product, Photographs & Specifications are subject to change without prior notice. A member of Consorzio NDI
