Meo 1 - Question Bank

Ref : IMU/MAE/08/CRSMT/001/10

Revision 01

Indian Maritime University ( A Central University ) East Coast Road, Uthandi, Chennai – 600 119.

Phone : (044) 2453 0343/44/45, Fax : (044) 2453 0342 Email : [email protected] Website : imu.tn.nic.in

Marine Engineering

M E O CLASS - 1 (For Chief Engineer Officer)

Volume - III (Question Bank)

VOLUME-1

Question Bank For

MEO CLASS -1 COURSE

NATIONAL MARITIME ACADEMY (Formerly NATIONAL INSTITUTE OF PORT MANAGEMENT)

East Coast Road, Uthandi, Chennai 600 119.

QUESTION BANK SOLAS CONVENTION 1.

SOLAS Convention is generally regarded as the most important of all International treaties concerning the safety of merchant .ships. Illustrating its brief history commencing from the first version give chronologically its evolution towards formation of International convention for the Safety of Life at Sea, 1974 (SOLAS). Explain its amendment procedures as detailed in the Article VIII of the said convention. What is meant by 'Amendments by conference'? When these amendments enter into force? What does 'Accelerated Amendment' mean?

2.

What is the main objective of the SOLAS Convention 1974? Under the said convention state the responsibility and control provisions of flag states/contracting Governments. Briefly describe the coverage as detailed by twelve chapters of SOLAS.

3.

State the objective behind Protocol of 1978 of SOLAS Convention 1974. Underlining its date of adoption and entry into force, describe the number of important changes to Chapter I of SOLAS. Also describe 1981 amendments as made in Chapter II-1 and II-2.

4.

Illustrating date of adoption and entry into force in each case, describe the amendments and protocols as made to SOLAS Convention 1974 in (i) 1983 (ii) 1988 (iii) 1989

5.

Illustrating date of adoption and entry into force in each case, describe the amendments and protocols as made to SOLAS Convention 1974 in (i) 1990 (ii) April 1992 (iii) December 1992. What all codes were amended in those amendments?

6.

Describe the amendments as made for Chapter IX of SOLAS by May 1994 Conference and to make mandatory a code as adopted by IMO in November 1993 (Assembly resolution A.741 (18)). State the main objectives of the said code. Also highlight the amendments made to Article VIII and Chapter X of SOLAS by the said amendments

7.

Highlight the amendments made to Chapter XI of SOLAS by May 1994 Amendment Conference. Under the said measure emphasize the special regulations that were added and entered into force under tacit acceptance on 1 str January 1986. What reference does the said conference made/stressed to Regulation A.742 (18), adopted in November 1993 for SOLAS?

8.

Describe the new regulations that were added to Chapter V of SOLAS under the May 1994 amendments. What improvements the said amendments made to Regulation 15 in Chapter II-2? Enlist the different codes that were amended in the said conference/ Illustrate 'clear grounds' as defined in the Annex of Resolution A-742 (18) adopted in November 1993 by May 1994 amendments.

9.

Underlining the date of adoption and entry into force describe December 1994, May 1995 and November 1995 amendments as made to SOLAS 1974. Highlight these amendments made on (I) Ship's routing system (ii) Stability of Ro-Ro Passenger ships (iii) Lifesaving appliances and arrangements.

10.

Describe the different Chapters of SOLAS that were amended and its salient features as amended by amendments made in (i) June 1996 Conference (ii) December 1996 Conference. Illustrate their date of adoption and entry into force in both cases. Highlight the codes that were amended under these amendments. What new Regulation that were added in Chapter II-1 under December 1996 amendments?

11.

Underlining date of adoption and entry into force, Illustrate the changes June 1997 and Nov, 1997 amendments conference to SOLAS 1974. What new regulation to comply with the regulation adopted in Nov, 1995 for Ro-Ro Passenger ships was adopted in June 1997 Amendment Conference? What observations by International Association of Classification Societies (IACS) was taken into account in Nov. 1997 Amendment?

12.

Under provisions of May 1998 amendments to SOLAS, what provisions in the amendment has been made to Regulation 14 of SOLAS in Chapter II-1? Also include the changes made to Chapter IV and Chapter VI of SOLAS under said Conference. Illustrate the new regulation on 'Position Updating' has been introduced in context with above.

13.

Illustrate the May 1999 amendments to SOLAS 1974 including its date of adoption and entry into force. State the classes the ships carrying INF cargo are assigned with under this amendment. What specific changes to adopted amendments on Nov. 1997 has been included in May 1999 amendments? What is meant by the said amendment being under 'tacit acceptance*?

14.

Highlight the amendments as included in SOLAS Chapter V under Dec.2000 amendment. State the new regulation in SOLAS Chapter II-1 and different amendments made to SOLAS Chapter V. Fire and Test Procedure Code (FTP), IBC Code, BCH Code and ISM Code as made by the said conference (Dec. 2000 amendments).

15.

State the salient amendments made to SOLAS 1974 by amendments under June 2001 and May 2002 amendment conferences. Which one of these is under 'tacit acceptance'? What changes to 1978 protocols have been initiated in May 2002 amendment? What impact does May 2002 amendment conference have on IMDG Code?

16.

State the salient clauses of amendments made to SOLAS 1974 by Dec. 2002 amendment conference? What modifications to Chapter V and Chapter XI of SOLAS has resulted under this amendment. Discuss the new Regulation XI1/5 and new chapter XI-2 that have been added to SOLAS on the basis of this amendment. Also state the requirement/modifications made to Regulation XI-2/3 enshrining International Ship and Port facilities Security Code (ISPS Code)

17.

Explain the procedure and the role played by main bodies/organs of IMO towards adopting a convention from the suggestion from one of the committees of IMO. How much time is allowed for the convention to be open for signature by attending states? Explain the term (i) Signature (ii) Ratification as followed by a state to express its consent to be bound by a treaty.

18.

Discuss the procedure of entry into force of a convention after its adopting? State the provision and its importance towards entry into force of the convention. For a convention of important technical nature sate the general rules/conditions observed by the states for its entry into force. Explain the terms (i) Accession (ii) Signature subject to Ratification, acceptance or approval.

19.

With reference to IMO conventions discuss (i) Amendment (ii) Tacit Acceptance (iii) Enforcement should an offence occur by a ship within the jurisdiction of another state, state the provisions kept under the 'enforcement' of conventions to counter the offence.

MARINE LAW 20.

What are the general considerations in international maritime law? What are the general considerations in regard towage and salvage? Explain life salvage and time for suit.

21.

What are the basic criteria in cargo carriage under bills of lading and related documents? Explain the procedure towards issue of bill of lading. What are the obligations of the carrier and shipper under bill of lading? What happens in case of a part of cargo getting lost or damaged?

22.

Under maritime law in case of a collision, explain (i) apportionment of damages (ii) proportionate fault (iii) collision liabilities (iv) presumptions of fault (v) jurisdiction in collision cases.

23.

What are the various collision liabilities under international maritime law? How the economic laws in ship collisions are assessed? Highlight your views on 'collision and conflicts of law'?

24.

What are the principles of modern salvage law? What is general average ? Explain with context to general average (i) Entitlement (ii) Artificial (iii) Adjustment (iv) Contestation

25.

What do you understand by state controlled salvage? In context to salvage explain the key issues of 'The 1994 York/Antwerp Rules' and 'The Nordic and Chinese Maritime Codes'

26.

What are the liabilities of a ship owner in carriage of passengers onboard ships? Explain the importance and relevance of 'Pre-Athens Convention Legislation" and 'The Athens Passenger Convention 1974' .

Part A: MERCHANT SHIPPING ACT 27.

A vessel is required to be registered at a specific port in India. List the documents that will be required for such registration detailing related flow process thereof.

28.

An Indian Shipping Company is running at considerable loss for consecutive years and desires to put some of their vessels in mortgage. Identify the parties to whom the vessel can be mortgaged and in extreme measure when the shipping company fails to repay the mortgaged loan, describe the modalities for recovering.

29.

Under 'Indian Merchant Shipping Act’, explain (i) Indian Courts and their procedures towards a major casualty on a foreign flagship (ii) Arrest of Maritime property (iii) Arbitration.

30.

In case of a death of a crew member on an Indian ship at Indian coast, describe the necessary provisions as laid out in 'Indian Merchant Shipping Act'. What provisions made by the same Act towards seaman's documents and stowage?

31.

With Indian Merchant Shipping Act 1958, discuss (i) Indian Courts and their procedures (ii) Arrest of maritime property (iii) Liens (iv) Arbitration

Part B: INTERNATIONAL LEGISLATIONS 32.

Describe the salient considerations leading to first United Nations Conference on The Law of the Sea. When it was provisionally accepted and when it entered into force? What is meant by Arvid Pardo and the - Common Heritage of Mankind-Principle?

33.

In addition to the provisions of UNCLOS, state the coastal zonal division made by coastal resources management authority. Differentiate between different categorization of 'sandy beaches' under US Maritime Law.

34.

Explain 'Estuaries' and 'Water shades' as defined by US Maritime Law and its significance on implementation of UNCLOS.

35.

What are the UNCLOS provisions concerning ship's flag and nationality? In observation of UNCLOS what are the duties of flag states and how it is enforced?

36.

As a Chief Engineer on a vessel scheduled to make a voyage from India to the U.S. Coast, list the salient items you will inspect, machinery-installations you will ensure for satisfactory operation and documents you will keep handy for making a satisfactory voyage. Give reasoning in each case.

37.

State Maritime Declaration of Health and the requirements of International Health Regulations for persons employed on board for sailing. An Engine Room personnel being traced of suffering from a contagious disease (E.g. Tuberculosis, AIDS etc.,) while on a voyage, state the steps taken by you as Chief Engineer on board.

38.

Give a brief history and the necessity towards formation of UNCLOS? What are its important highlights? Under context explain (i) Territorial Sea (ii) Contiguous Zone (iii) Exclusive Economic Zone (iv) Continental Shelf (v) High Seas/

39.

Explain the key features of the United Nations Convention. On the Law of the Sea? When this convention was opened for signature and when it entered into force? How many articles and annexes it contains? Enumerate the areas covered under this convention?

40.

Give a brief background of ILO, its inception and its fields of mandate for Maritime Labour Development. Name three-conventions/protocol of ILO concerning maritime labour, which has come in force in 1996.

41.

How many maritime labour conventions been in force concerning seafarers? Highlight Merchant Shipping (Minimum Standards) 1976 and its protocol and its contribution to uplifting the working condition of seafarers on board.

42.

State the number of articles present in Merchant Shipping (Minimum Standards) Convention 1976 and briefly explain the purpose of each article.

43.

Address the salient issues as underlined in the Health Protection and Medical Care (Seafarers), 1987 convention of ILO. As a Chief Engineer comment its contribution to the improvement of medical care of seafarers on board ships.

44.

Explain (i) WHO International Health Regulations (ii) ITU International Telecommunication Regulations; What impact these treaties have on modern shipping?

45.

What are the liabilities of a ship owner in carriage of passengers onboard ships? Explain the importance and relevance of 'Pre-Athens Convention Legislation' and 'The Athens Passenger Convention 1974'

MARINE INSURANCE P & I CLUB & GENERAL AVERAGE 46.

Give a brief history of P&I Clubs highlighting its inception, and growth. It is said 'Rebirth of P&I Clubs is due to growth of Third Party Liabilities'Elucidate.

47.

What is a P&I Insurance? How these clubs operate worldwide? Connected with P&I Clubs, explain control, dividends, scope of cover and letters of undertaking.

48.

Illustrate the present service philosophy of P&I Clubs and how they work on a day-to-day basis world-wide? How is it controlled?

49.

With reference to P&I Club, explain:

50.

(a) International group (b) Re-Insurance (c) Representative Function

51.

What are the salient differences of a Marine Insurance with a shore based installation Insurance? With respect to Marine Insurance explain: (a) Agreed Value and ACV Policies (b) P&I Liability (b) Water craft Liability (d) Hull Coverage

52.

A serious fire has taken place in the bridge of a vessel arising out of short circuit. Describe the type of insurance coverage the ship is entitled to and what type of policy will cover the maximum damage recovery? What is uninsured boater coverage?

53.

Define Marine Insurance. Highlight the importance of Marine Insurance cover requirements for owners and Shippers. Underline the risks/liabilities involved in cargo transportation for a ship not covered under insurance.

54.

Specify the related bodies and their objectives in Marine Insurance market. Highlight the purpose and objective of P&I club insurance. What are it's limitations?

55.

State the different types of Marine Insurance Policies that could be undertaken by owners, shippers or other related parties. Explain the salient liabilities and exclusions related with each case for an insurer.

56.

Underlining Marine Insurance Cover, explain (i) Hull & Machinery cover, (ii) P & I Insurance (iii) Cargo Insurance (iv) Pollution Liability Insurance.

57.

Explain losses & it's categories with respect to Marine Insurance. Why and where particular average and general average are of importance in Loss Claims?

58.

Explain Hull Claims and Cargo Claims related with Marine Insurance. State the related documents and information required from the ship in this regard highlighting their validity.

59.

What are the main statutes of marine insurance? Explain with reference to marine insurance (i) Direct Action (ii) Re-insurance (iii) Marine insurance and conflict of laws.

60.

With reference to Marine Insurance, write short notes on (i) Actual cash value policies (ACV) (ii) Protection and indemnity liability (iii) Water craft liability.

61.

With reference to P&I club, write short notes on (i) Medical payment coverage (ii) Uninsured Boater coverage (iii) Towing coverage.

62.

List the differences of a Marine Insurance compared to a General Insurance at shore. Discuss its applicability in a new ship and an old ship procurement.

63.

What do you understand by state controlled salvage? In context to salvage

explain the key issues of "The 1994 York/Antwerp' rules and 'The Nordic and Chinese Maritime Codes'. ISO AND ISM CODE 64.

A QMS is to be developed on board under ISO. State the steps initiated by you with the co-operation of senior management members on board and shore office to implement the same within a targeted date.

65.

list the objectives of an Internal Audit of a ship? How an Internal Audit help in External Audit of a vessel? Name the salient issues addressed in the Internal Audit and the persons responsible to carry out the same.

66.

You have joined as Chief Engineer on an old sailing vessel which has been recently procured by the owners. State the documents you will need for immediate sailing under ISM Codes and how this can be achieved within a short targeted span?

67.

Illustrating differences between major and minor nonconformity and near miss situations, show with examples steps taken by you as Chief Engineer in each case for successful handling of the situations.

68.

For an ISM certification, explain the key clauses which is needed to be complied with? To have SMS onboard to be successful, state the factors and their importance to be the commitment from a Chief Engineer and shore office.

69.

Under ISM codes define 'Company'. How the identity of the company maybe asserted under reference to the said code? Enumerate the objectives of 'ISM code' and 'Safety Management System'.

70.

Identifying the clause under ISM code, enumerate Master's responsibility and authority. Specifying the clause of the code, enlist the requirement of key operations and responsibilities as detailed towards development of plans for shipboard operations by (i) Shipping Company (ii) Ship operating Staff. Enumerate also the key shipboard operations.

71.

With reference to ISM Codes explain (i) Non Conformity (ii) Accident (iii) Hazardous Occurrence (iv) Disclaimer. What are the salient features and objective of SMS Documentation? What are Software and Hardware considerations for meeting objective under the Code?

72.

Under ISM certification explain (i) DOC (ii) Short term DOC (iii) Interim

DOC (iv) Full Term DOC (v) SMC (vi) Short term SMC (vii) Interim SMC (viii) Full Term SMC. Briefly explain the significance of issuance of each certificate stated above, specifying the condition for all 73.

State the action taken by a survey society towards handling of an ISM Certificate incase (i) When a major non conformity is found (ii) When non conformities are found (iii) When extension of the certificate is requested for (iv) When revision of an entry for a certificate is requested for. Under what circumstances may SMC and DOC be invalidated.

74.

Classify the type of ISM Audits conducted for a shipping company and of a ship emphasizing its timing. Explain what is meant by follow up audit.

75.

Explain shipboard audit highlighting initial audit, intermediate audit, intermediate audit, renewal audit and additional audit. What are the audit procedures when a shipboard audit could not be completed due to a change of ships departure time.

SHIP STABILITY 76.

Detail the inspection that you as the new Chief Engineer of a passenger ship, would make on vehicle decks. The following headings are suggested: (i) Stability (ii) Damage control (iii) Fire Fighting (iv) Machinery Give reasoning in each clause of your inspection.

77.

You have been appointed as Chief Engineer to a Dry cargo vessel recently purchased by your shipping company. The company requests that you examine the vessel with a view to increase its deadweight capacity without altering ships length. Outline the suggestions that you would make justifying your proposals.

78.

Underline the factors, which is required for quantitative evaluation of ship's intact stability. On a ship where you are appointed as Chief Engineer, describe the procedure you will adopt for computing intact stability of the vessel. Conclude your assessment with some realistic data.

79.

What is parametric rolling of a ship? How it originated? Under what consideration it has become important in today's scenario? Considering a Post Panamax Container vessel carrying a load of 1300 containers is overtaken by a hailstorm. Enlist the effects on the ship due the condition under parametric rolling. Justify your answer with reasons.

80.

Differentiate between static and dynamic stability? Can a ship high on GM be

low on stability? Justify your answer with reasoning. Enlist the governing factors you will inspect while taking over anew ship in shipyard as Chief Engineer for having optimum stability in both categories. Substantiate your answer with reasons. 81.

Explain damage buoyancy and damage stability. Highlight "One compartment" standard for ships towards damage control. "Ships carrying liquid cargo are at hazard from groundings and explosions, but their sinking from collisions is very rare" - Justify the statement with reasoning.

82.

Explain "Ship Squat" and its relevance on super tankers or OBO vessels. What are the factors governing ship squat? Using relevant diagrams explain your answers.

83.

Enlist the factors of capsizing of a vessel. Give your observation with reasoning that a smaller vessel is more prone to capsize than a bigger one. State the actions that can undertaken for improving resistance of a vessel against capsizing?

84.

Explain transient flooding phenomenon. Underline the risk involved with transient flooding. Considering that transient flooding condition may lead to capsizing of a vessel, explain the phases of ship's movement from upright to overturn position due to transient flooding?

85.

State the effect of increasing beam and freeboard on stability with reference to a stability curve for a particular vessel in-a particular condition of loading. How to reduce the maximum range of stability under conditions in these cases?

86.

A box shaped vessel is 50m long and is floating on an even keel at 4m draft. The compartment amidships is 10m long and is empty. Find the increase in draft if this compartment is bilged. (Ans. lm)

87.

A box shaped vessel 150m x 20m x 12m is floating on an even keel at 5m draft. A compartment amidships is 15m long and contains timber of relative density 0.8 and stowage factor 1.5m3/t. Calculate the new draft if this compartment is now bilged. (Ans.5.085m)

88.

State the factors on which damage stability of the vessel is dependent. State the principle consequences of flooding ships hull. Defining floodable length, illustrate how a floodable length curve can be used to test the locations of the subdivision bulkheads in a ship.

89.

A box shaped vessel 40m long, 8m wide and 6m deep floats in salt water on an even keel at 3m draft. GM=lm, find the new GM if an empty compartment 4m long and situated amidships is bilged. (Ans. GM2 = 0.99m)

90.

A ship of 50001 displacement has the righting levers as follow; Angle of heel 10° 20° 30° 40°GZinm 0.21 0.33 0.40 0.43 Calculate the dynamic stability at 40° heel.. (Ans. 1026.5 meter tones)

91.

Suggest with reasons, why each of the following courses of action are appropriate if a ship begins to wallow in heavy seas : (a) frequently sound all hold bilges (b) frequently sound bilges in chain locker, peak tanks, cofferdams and other void spaces (c) sound all fuel, fresh water and ballast tanks (d) if satisfied with (a), (b) and (c) trim ship by the stern and correct any list (e) reduce speed of the main engine

92.

In order to determine optimum stabilization devices for roll damping of ships, express your comments on: (i) Hull shape effect on bilge keel component (ii) Forward speed effect on bilge keel component (iii) Non linear effect on hull lift component (iv) barge/flat ship with sharp corners (v) Flat planning craft.

93.

A ship of 6000 tones displacement enters a dry dock trimmed 0.3 m by stem. KM=7.5M, KG=6m. MCTC=90 tones m. The center of floatation is 45m from aft. Find the effective meta centric height at the critical instant before the ship takes the blocks overall. (Ans.: New GM=1 .425m)

94.

A ship of 5000 tones displacement enters a dry dock on an even keel. KM=6m. KG=5.5m. T[C=50 tones. Find the virtual loss of meta centric height after the ship has taken the blocks and the water has fallen another 0.24m. (Ans. : Virtual loss=l .44m)

95.

To ensure an adequate standard of damage stability protection following a number of accidents involving Ro-Ro ferns, amendments have been made by (i) IMO to 1974 SOLAS Convention (ii) by IACS on flood control doors, bow doors and fitting to these doors. Describe above with sketches as necessary and give your conclusive comments.

Part - A : IMO CONVENTIONS 96.

Differentiate between Rules, Regulations, Protocol, Act, tacit acceptance and Convention as adapted in IMO. Describe the process by which a Draft proposal gets converted into a Rule administered by a maritime member country?

97.

List the date of entry into force/Convention or Code of IMO in the year 2002. On what basis as towards implementation of IMO'S Conventions 1st January 2002 and 1st July 2002 is important?

98.

List the amendments to the existing Conventions of IMO to come in force in the year 2003 briefly giving a description of each. What changes are likely to be foreseen on ship operation world wide on implementation of these amendments?

99.

Expanding the following abbreviations/word, write a short note on the following mentioning their initiation and the Amendments made thereof till date: a. STCW

b. IMDG

c. INMARSAT

d. TONNAGE e. LOADLINE

100.

As per STCW convention 78 and Code of 95, state to which branch do the following sections refer to (a) Section A-III/1 (b) Section A-TIT/2 (c) Section A-III/3 (d) Section A-III/4

101.

Underline the importance of IMO Convention concerning minimum standards merchant ships, 1976 (No.147) and its protocol 1996. Also give a brief description of other relevant IMO Conventions.

102.

Eate the influences of a Charterer on operation of propulsion and other shipboard machineries during a voyage. A ship on a time-charter if met with several unforeseen machinery breakdowns due to which the scheduled date cannot be met with, state the different options and actions a Chief Engineer on-board should undertake?

103.

Highlight the following amendments to IMO Conventions and its effect in ship operation thereof. Mention their date of entry into force (c) CLC and Fund Conventions (d) SOLAS-IMDG Code

104.

Highlighting the importance of the dates shown below as towards entry into force of IMO Conventions/ Codes/ Amendments, describe the effect it will have on maritime ship operation worldwide (a) 1st Jan 2003 (b) 1st May 2003 (c) 27th Sept.2003 (d) 1st Sept. 2002

105.

Piracy of ships and robbery of valuable goods have become issues of concern in maritime trade under current scenario, Highlight the IMO Convention

related to these issues and the proviso a Chief Engineer has to encounter such incidents successfully under International Legislation. 106.

Describe the responsibilities of a Chief Engineer under the relevant requirements of the International Convention on Load Lines. In case of a debate arising out of tonnage calculation for a ship in transit through a canal, describe the modalities a Chief Engineer can adopt.

107.

List the methods and aids to prevent pollution of the environment by ships under IMO Conventions and steps you can take for its successful implementation on a ship prior its voyage, where you have joined as Chief Engineer.

108.

Under SOLAS, state the responsibilities of a Chief Engineer for safety of life of personnel on board in : (a) In general (b) In emergency situations

IMO REGULATIONS QUESTIONS 109.

Describe the amendments made in SOLAS chapter II-1 Parts A, B and B-l towards consideration of trim in the calculation of attained subdivision A. What are the provisions made thereof for passenger ships? What provisions made against intermediate stages of flooding?

110.

Describe the definition of collision bulkhead as documented by IMO? Also give provisions/amendments made in existing SOLAS Regulations against bottom damage and grounding protection of a vessel? Also highlight the length definition issue for application of damage stability requirements.

111.

When International Convention of Maritime Search and Rescue was adopted, and when it was amended? Describe the salient features of revised annex as entered into force since 1st Jan 2000. How many chapters is contained in the revised annex.

112.

State the date of adoption and entry into force of International Convention on Standards of Training, Certification and watch keeping for Seafarers. Give a brief introduction of the convention highlighting its purpose, articles related, different chapters contained and their area of coverage.

113.

State the resolutions adopted by 1978 Convention on STCW. What is the

amendment procedure of the said convention? 114.

When the amendments to the STCW annex will normally enter into force? State the amendments made on to the said convention underlining its date of adoption and entry into force since 1991.

115.

What is meant by "White List" of member countries of IMO? The countries not falling under the "White List" of IMO are faced with what all inconveniences? Describe an important procedure concerning the exercise of state that has been followed off from Chapter I of STCW convention. Under the said chapter also highlight technical innovations and provisions or coping of fitness standards of seafarers as detailed specifying the regulation and section of STCW Code.

116.

Underlining the date of adoption and entry into force, give a brief description of the objectives towards convention on the International Maritime Satellite . What is meant by IMSO? What are its entitles? Also give a brief description on subsequent amendments made to the said convention in (i) 1985 (ii) 1989 (iii)1994 (iv) 1998

117.

Give the reasons and importance leading to International Convention for Safe Containers, 1972 (CSC) ? What are its goals? Stating its date of adoption and entry into force explain the different technical annexes included thereof and subsequent amendments made in (i) 1981 (ii) 1983 (in) 1991 (iv) 1993 PART - B: SAFETY REGULATION, PROCEDURE AND HOW TO CONFIRM SAME

118.

Describe the Annexes as included in COLREG 1972. Also give a brief description of the subsequent amendments made in (i) 1981 (ii) 1987 (iii) 1989 (iv) 1993

119.

Highlighting the objective of COLREG 1972 Convention, describe the 2001 amendments underlining its date of adoption and entry into force? State the number of rules that were amended in the said amendment briefly giving a necessity of such amendment related to wing-in-ground craft (WIG)?

120.

State the objective ofl972 Convention designed to replace Collision Regulations of 1960. What is the most important innovation in 1972 COLREG? State the technical provisions highlighting its different section and Annexes.

121.

Under technical provisions of 1972 convention on COLREG, state the

objective of all its sections. Underlining the total number of rules in the said convention discuss (i) Rule 5 (ii) Rule 6 (iii) Rule 9 122.

What are the technical provisions made under general rules of 1972 conventions on COLREG ? Discuss Rule 10 in detail. Explain the term "not to impede". Also detail any amendment made thereof?

123.

Specify the number of rules included under Section II and Section III of COLREG 1972. Giving a brief description of the rules, highlighting objectives of Section II and Section III of the said.

124.

Describe the Special Trade Passenger Ships agreement, 1971 and Protocol on Space Requirements for Special Trade Passenger Ships, 1973. Also give a brief description of Protocol on space requirements for Special Trade Passenger Ships, 1973. Give the date of adoption and entry into force in both cases of the above.

125.

Give the history of requirement leading towards International Convention On Load lines, 1966, underlining its date of adoption and entry into force. What special provisions were included in the said convention in comparison to first International Convention on Load lines adopted in 1930 ? Describe its different chapters highlighting their area of coverage and related Annexes.

126.

Illustrate the different amendments to the International Convention onl Load lines, 1966 as amended in (i) 1971 (ii) 1975 (iii) 1979 (iv) 1983. What was the primary requirement towards adoption of 1988 protocol to the said convention ? Describe its 1995 amendments and revision of Load line conventions thereof.

ISM CODE Questions: 127.

Underline the objectives of ISM Codes and Safety Management (SMS). Enumerate the different components of a planned management programme for a propulsion engine of a ship. While assimilating repair and spare parts data what are the factors to be taken into consideration?

128.

Define a 'Company' and its obligation under ISM CODES TOWARDS SAFESHIPBOARD OPERATIONS. Enumerate the key shipboard operations, which should be maintained by a company of successful onboard operation of a ship under ISM Codes.

129.

Illustrate (i) Maintenance Plan (ii) Repair Plan (iii) Spare Part Procurement Plan as required under Planned Maintenance. State the activities required towards establishing a spare part history. Highlight the related ISM clauses and discuss how at best they could be implemented for the best advantage of a 'Engine room Planned Maintenance System'.

130.

As a Chief Engineer you have joined a vessel which is about to undertake a six month round voyage. Underline and describe the key issues that you will inspect, check, prepare, establish and maintain towards proper Planned Maintenance of Engine Room and associated areas under ISM Codes.

131.

Explain the objectives of a responsible company as required under ISM Codes. Explain with reasons, why existing maintenance plan threatens ISM Certification and increases risk of Port State control detention.

132.

Give the specific requirements under ISM Codes defining (i) Company Objectives (ii) Designated persons (iii) Resources and personnel (iv) Reports and analysis of non conformities, accidents and hazardous occurrences (v) Documentation (vi) Company verification, review and evaluation. Establish the relation between above mentioned factors with respect to maintenance of the ship and its equipments.

133.

Explain the associated key factors and activities to ensure successful Planned Maintenance programme onboard ships under ISM Codes with the following terms (i) Corrective action process (ii) Developing and improving maintenance procedures (iii) Systematic approach to maintenance (iv) Maintenance intervals (v) Inspections

ECONOMISING OF FUEL OIL CONSUMPTION Questions 134.

Give a list of the properties or test by which distillate and blended fuels may be specified or decisions be made on their fitness for use. Name the properties or constituents that may be found in a blended fuel having a high viscosity and high carbon content. Explain how they may cause problems in engine operation.

135.

With reference to the layout diagram and relationship between engine power and ships speed establish the conclusions that may be drawn towards optimum use of fuel oil for main engines. How the relationship is drawn between ship speed and engine performance and state what consequent inference that can be established towards optimum use of fuel oil for

propulsion engine. 136.

With respect to economic fuel oil consumption for main engine, explain the importance of the following (i) Conventional VIT System (ii) Super VIT System (iii) FQS

137.

State from the different circumstances of running of propulsion engine and the engine behavior, how best a plan for economic use of fuel can be developed onboard from (i) Indicator diagrams (ii) Draw cards (iii) Light spring diagram

138.

Discuss the influence the following properties / contents have on fuel characteristics and its economic use (i) viscosity (ii) density (iii) ignition quality (iv) VIT (v) compatibility (vi) carbon residue (vii) control combustion period

139.

With reference to maintenance of plant efficiency, discuss energy audit of main engine, boilers and auxiliary engines. How such audit help in economizing fuel oil consumption

140.

Discuss FQS as applied to main engines to improve its performance. How its application can be best utilized for optimum economic use of fuel oil? Highlight the relationship between FQS and VIT and suggest ways so that both can be ideally balanced with a view to fuel oil consumption and MCR.

141.

Explain the influence of flowing external factors in higher consumption of fuel oil and how at best they could be controlled? (i) Ships hull condition (ii) Weather condition (iii) Maintenance of different elements in fuel oil system

142.

Develop a programmed for conservation and optimum use of fuel oil on board ship highlighting (i) storing of fuel oil (ii) degradation of fuel oil, its symptoms and prevention (iii) measures against undesired loss of fuel oil in the engine room.

143.

Illustrate mean piston speed, its significance on consumption of fuel oil. Explain how mean piston speed is related to r.p.m. and ideal combustion. Joining an old ship as Chief Engineer, formulate a methodology by which you can ascertain optimum use of fuel oil against desired mean piston speed.

FUEL OIL COMBUSTION 144.

Learn to familiarize with the different engine behaviour and performance graph related with combustion like stroke cycle, cylinder pressure/fuel

pressure, angle behaviour etc., 145.

Study the effect of change of fuel oil properties on engine behaviour and performance. Learn to identify the related changes.

146.

Study the change of engine behaviour/parameter due to changes in injection characteristics and overload.

147.

Study the different faults like cutting of a cylinder, turbocharger malfunctioning etc. and its influence on engine performance.

148.

Study the analysis of different combustion curve under different fault condition.

149.

Study of different alarms related to running of main engine.

150.

Study the fuel oil characteristics and optimization of available fuel oil consumption with respect to rated power.

151.

Study the change of engine behaviour with respect to VIT and FQS setting.

152.

Study the changes in turbocharger performance due to change in

153.

Study the analysis of changes in Engine Parameters, behaviour and performance and locate the associated faults.

154.

Any other tasks related with Engine performance/fuel consumption/inserted fault etc.

FQS.

TRAINING FOR TRAINERS Questions 155.

Illustrate the salient factors for 'onboard training' and standard of competence as laid out in STCW 95 Chapter III. Underline the specific roles a Chief Engineer needs to perform towards satisfactory training of engine room personnel under the parameter. What will be the criteria for evaluating competence for onboard training by a Chief Engineer?

156.

With reference to Section A-V/3 and training to engine room personnel, illustrate the role of a Chief Engineer in (i) Crowd management training (ii) Familiarization training (iii) Safety training for personnel providing direct service to passengers in passenger spaces (iv) Crisis management and human

behaviour training. 157.

With reference to Section A-VI /l of STCW 95 enlist the minimum requirements for familiarization, basic safety training and instruction to all seafarers. Underline the importance of the role of Chief Engineer of a ship in enforcing these elements of STCW training.

158.

You have joined a vessel as Chief Engineer recently. Outline a programmed that you will implement in training of Engine Room staff for (i) Fire prevention and fire fighting (ii) Pollution prevention (iii) Safe working practices. Enlist the related STCW Codes for each of them.

159.

As a Chief Engineer on a ship, how you would conduct a training programmed for safe working practices in (i) Welding (ii) Ballast water management (iii) Pollution prevention.

160.

Describe a procedure to establish a training programmed appropriate for the training need of Engine Room personnel on board, where you have joined as Chief Engineer. Illustrate the measures you will undertake in view of a section of Engine, Room personnel not adopt in attaining the standard within a specified time period.

161.

Discuss the contribution of the following factors on ship in identification of proper training for a specific task performed (i) Internal Audits (ii) Emergency drills (iii) Previous training and experience (iv) Familiarization with new equipment.

162.

Highlight the salient measures of a training programmed that you will undertake on joining a vessel as Chief Engineer in pursuance of SOLAS guidance and as underlined in (i) May 1999 Amendments (ii) May 2002 Amendments (iii) Chapter IX of SOLAS

163.

With reference to training onboard ships and emergency drills discuss the procedure and importance of (i) testing of emergency fire pump and emergency bilge pump (ii) operation of remote shutoff valves and remote stop switches (iii) operation of fire flaps.

164.

As a Chief Engineer on a ship where you have joined recently, develop a training programmed for shore related activities of a vessel. Highlight the specific training needs for engine room personnel in case of (i) overloading (ii) fire (iii) explosion, when the ship is in dry dock.

165.

Outline the salient points of a training need that is required for engine room

personnel in ship related emergency situations like (i) Collision (ii) Grounding (iii) Flooding (iv) Heavy weather damage. 166.

As a Chief Engineer onboard draw up an appropriate training plan for engine room personnel towards successful handling of (i) major fire in engine room and wheelhouse (ii) Pollution involving cargo/bunkers.

167.

Develop an appropriate training programmed for engine room personnel for successfully encountering machinery related emergency situations like (i) Main engine/auxiliary engine failure (ii) automation failure of main engine in UMS vessels (iii) Steering failure (iv) Electrical failure.

168.

With respect to training ship operation discuss the procedures and importance of (i) conducting management meetings to train officers and crew in engine, deck and catering department (ii) purpose of onboard training and its advantages.

CHIEF ENGINEERS RESPONSIBILITIES 169.

Illustrate the key issues in new ship building contract negotiations. How to estimate 'risk analysis' and how to reduce your exposure? State the contract terms which really matte and the pitfalls to avoid in such negotiations.

170.

Explain Conversion Contracts. 'Conversion contracts are known to be different and of greater risk but still have some over-riding advantages over other contracts' — Substantiate the statement with due reasoning. State the particular problems associated with such contracts.

171.

Enlist the salient requirements by the new BIMCO Repair form. Highlight (i) Evolution and its purpose (ii) BIMCO style and format (iii) Commercial balance (iv) Distinctive features (v) Availability.

172.

With respect to key issues in ship repair contracts, illustrate (i) Payment terms (ii) Ambit of the specification -and additional works (iii) Contract period, liquidated damages and force majeure (iv) Guarantees and insurance (v) Termination events.

173.

With reference to engineering economics, explain (i) Time value of money (ii) Present worth comparisons (iii) Rate of return calculations (iv) Replacement analysis. How best these terms are related to ship repair/ship building?

174.

With reference to ship repair/shipbuilding, and engineering economics

explain the terms (i) Risk analysis (ii) Brake even analysis (iii) Sensitivity analysis (iv) Multi stage sequential analysis (v) Multi attribute decision making 175.

With reference to project cost estimation towards a major ship repair with multiple activities, explain (i) Cost Groups (ii) Cost parameters (iii) Work breakdown structure (WBS). How best in your opinion these modules assist towards an optimum ship repair cost estimation?

176.

Illustrate ship repair management and its objectives. Enlist the list of services under ship repair management and highlight with (i) Assessment of ship repair quotations (ii) supervision during repairs (iii) Coordination with classification society and flag Administration (iv) attendance of necessary trials and testing (v) Full report on actual repairs effected for record purposes.

177.

With reference to key ship repair processes, as a chief engineer on a ship undergoing major repairs, discuss the following (i) Non destructive testing (ii) Steering gear, rudder survey and repairs (iii) Ship conversions. Explain the due care, precautions and safety measures undertaken during above works.

178.

With respect to engine room man management enlist the key issues you will address with proper justification in the following areas (i) incentive programmes (ii) Long term personnel development concept (iii) Human resources quality assurance (iv) attitude and motivation development (v) Emergency response.

179.

A ship on which you have joined as Chief Engineer is scheduled to be put in active service after major lay-up and necessary repairs. State the survey inspections and trials to be made by the surveyor in presence of Chief Engineer and Master.

180.

You have been appointed as the Chief Engineer of an older vessel which is in dry dock and recently been purchased by your shipping company. Describe in a letter addressed to Engineering Superintendent, your inspection to ensure that the conditions of assignment are satisfactorily complied with.

181.

The vessel on which you are posted as a chief engineer is scheduled for drydocking. Illustrate with reasoning. What all due care you will undertake towards preparation of a defect list due to be sent to the head office? Also what all inspections you will make and documents you will keep ready prior entering dry dock for successful utilization of time and conduction of

necessary repair/survey and dry docking activities? 182.

Your vessel where you are posted as chief engineer is about to enter a dry dock. State the coordination and information exchange necessary with the master of the vessel for successful entry. Also list the necessary preparations you would make along with earmarking division of duties to the engineers of the vessels. Enlist the inspections and co-ordinations you will make with the dry dock authorities for successful coming out of the dry dock.

183.

During inspection of propellers in the dry dock a surface crack has been noticed on one of the blades. State the steps taking by you as chief engineer for successful handling of the situation. Also if some surface cracks are noticed on the key way of a tail-end shaft, state the steps taken by you for tackling the problem.

184.

Foreign going vessels are required to possess a valid safety equipment certificate renewed at intervals after survey of safety equipment. (a) Compile a list of items that are contained in the safety equipment survey. (b) From the list compiled in (a) above, select two ship systems, explain how they would be examined and identify possible defects.

185.

Define non-destructive testing and its purpose. Under context and with reference to ships machineries, discuss (i) dye penetrant testing (ii) leak testing (iii) magnetic particle testing (iv) radiographic testing (v) Ultrasonic test (vi) visual test. Underline the method of interpretation of results by these tests.

186.

On a ship where you have joined as a Chief Engineer, pumps shafts and impellers of the ballast pumps are suspected to be out of balance. Describe the process of balancing you will undertake and results you will interpret for necessary repair, use realistic data.

187. What are the different types of defects that could be tested by vibration monitoring and analysis technique for the engine room machinery of a ship? Discuss spectrum analysis and define how at best it could be used to locate severe vibration of tail end shaft and interpret the result. 188.

Describe the different types of defects/faults that could be diagnosed by lube oil analysis. Describe (i) drop test and its interpretation (ii) detection of mechanical degradation in bearings (iii) degradation of oil condition.

189.

Illustrate the provision kept towards establishing procedures to identify and testing of 'critical' equipments under ISM Codes. Enlist the shipboard items/operations subjected to inspection and test under ISM codes. How the list of critical equipment and systems are made and on what factors they are dependent.

INVENTORY OF FUEL AND LUB OIL 190.

State the different methods on board for ascertain lube oil/fuel oil onboard. If you were to ascertain the 'available' stock of both categories of oil of a ship where you have joined as a Chief Engineer. Describe the methodology you will employ and cross check for accuracy.

191.

You have joined an old vessel as Chief Engineer, which has been purchased recently by your shipping company. Enlist the methodology you will undertake for ascertaining the stock of lube oil / fuel oil on board and steps you will initiate for ordering of optimum quantity of oil requirement for the on coming voyage.

192.

Your vessel was bunkering at a port where you are posted as Chief Engineer. Describe the procedure you would employ for ascertaining/receiving correct grade/quantity of oil from the shore supply authorities. In case of a dispute over lube oil/ fuel oil received on board, describe the actions you will take under circumstances.

193.

You have joined a vessel, which is due for a long voyage. As a Chief Engineer describe the methodology / maintenance programmed you would employ during the voyage for the stored oil in the tank. What tests will indicate the stored oil is in good health?

194.

The ship on which you are working as Chief Engineer has run around and some of the double bottom tanks are suspected to be leaky with oil going out. Describe the methods employed by you in the situation for oil stock management and ascertaining the quantity of available oil.

195.

Describe the methodology you will practice during taking over /handling over of your vessel in a foreign port as a ? Chief Engineer towards inventory management of lube oil /fuel oil on board. In case of dispute arising thereof, describe how it can be best solved? During the circumstances how you would ascertain amount of oil not fit for use?

COMPUTERS 196.

Your vessel has shown a significant increase of fuel oil, which had been, recently dry docked. Frame a report in the format of an email addressing Engineer Superintendent with the related inspections made, findings established and suggestions for repair if any.

197.

Aft structure of a vessel is experiencing certain vibration. From the available shipboard application programme and analyzing through spectrum analysis forward your findings in a report from to shore office for ascertaining immediate action.

198.

You are to present the Voyage Performance Report in a high level meeting at companies headquarter. Suggest the various tools in PowerPoint you will employ, type of format for presenting text and diagrams you will prefer and how best you can assimilate a presentation, which will convoy the messages and inferences with best result within a fixed time of tight schedule.

199.

On a ship where are employed as Chief Engineer, the vessel has UMS system for controlling engine room and a central scanning and data logging system for monitoring. Explain the special attention you will pay to the specific data and formulate a chart for condition monitoring. Highlights the tools in computer application you will use for making graphical representation, salient points and trend analysis.

200.

You are required to send a Voyage abstract to the heat office containing all salient data as per regulatory feature. For making the spreadsheet, underline the specific computer application tools you will use and formulate a format for the abstract, which will show the salient data within available format of software to the best advantage. Use realistic data.

201.

What are the .component parts of a data logger of the type found in the engine room of motor ships? What are their purposes? Enlist and explain the different activities / purposes where computers are used in conjunction with diesel machinery on ships.

202.

"Document File" is a vital tool required during survey. Briefly explain its purpose, containment and support documentation. What is the process of identifying a survey in the "Document File".

MANAGEMENT 203.

What planning means for a Chief Engineer being the technical head board

ships and how he can determine in advance of a personnel programme that will contribute to goals established for the vessel? 204.

State definition of organizing and its key components. As a Chief Engineer on board perceive how this issue can be best addressed for effective crew and engine room management?

205.

Establish relationship between power and control. Underline the various potential barriers that must be overcome for successful implementation of crew management on board ships?

206.

As a team leader and resource manager identify the issues that could be addressed for maximum utilization of potential of technical personnel on board ships. Examine the development in compensation and benefit practices and trends followed thereof?

207.

Discuss the effects of legislation, professional standards and union environment on day to day operation of human resource function on board ships during a voyage and how they can be best countered under the situation?

208.

As a Chief Engineer how do you perceive an error committed by an engine room staff? While classifying an error common onboard ships state a modality to prevent such occurrence?

209.

Classify the common type of technical and humane crisis situation prevalent on board ships? In each case as a Chief Engineer how do you propose to plan, manage and handle such situations arising on board?

210.

What Is perception and perceived behavior? As a Chief Engineer on board how do you foresee such issues can be critical area in man management?

211.

Socio - Cultural differences have been an accepted fact in major merchant ship vessels around the globe. Explain how such differences generate inter personal conflict and affect management. How they can be resolved on board?

212.

Perceived threat is a critical issue in al Management. Underline how this issue can affect the day to day functioning of Engine Room ship and also instability arising out of it. How the situation may be countered?

213.

As Chief Engineer on board stress the issue you will address for lack of motivation, differences in attitude and to increase sense of competitiveness

for better management and effective control? Also formulate a flow chart for a work programme to be availed within a target date from a group of Engine Room Personnel of above mentioned mixed thought processes. 214.

Continued physical and psychological stress is a common phenomenon on board ships. State the salient indicative changes in crew behavior criteria's to identify such problems and formulate a strategy to best encounter such a situation at sea.

215.

Explore the methods by which the behaviour of members of Engine Room are constrained and influenced? How such problems can be best addressed on board ships?

216.

What are the primary strategies for coping with stress affected personnel? How these elements can be best implemented in ships personnel motivating them for better team work?

217.

State the elements of strategies needed for improving performance from a team of Engine Room Personnel looked upon as an ? Underline the steps taken to reduce mutual conflict and clarify their role/ responsibility?

218.

Define communication and its importance? How it can be the root of all personnel problems arising onboard ships?

219.

State the types of communication envisaged on board? How it can be the root of all personnel problems arising onboard ships?

220.

With the advent of information technology there had been a revolution in communication between ship to shore personnel. Discuss its types, barriers, problems arising thereof and ways of improving such issues?

221.

Underline the general procedures followed for flow of information among ships personnel. Considering you being the Chief Engineer on a ship having multinational crew how the process of effective information to the team can be approached by you and also how a certain instruction received by you from shore office for engine management can be best utilized? Why is feedback so important to communication? Considering a common example of an incident onboard ships list some guidelines for the effective use of feedback?

222.

Briefly summarize the four self’s in the Johari Window. What Implications does each have for interpersonal conflict onboard?

223.

What are the various kinds of conflict? Explain any one of them experienced onboard ships and means to prevent the same?

224. Describe the elements in management to counter sources of conflicts in an ? Considering such conflict has arisen on a ship due to cultural and social diversity. 225.

Considering Engine Room operation as a vital system onboard, discuss the influence of human factor in the same? What will be the common characteristics of such a system. Explain with example prevalent on board?

226.

What is understood by an open and a closed system? For effective maintenance of ships machineries and fruitful teamwork which system you will prefer and why?

227.

"Mechanistic approach to personnel as opposed to Scientific Movement is an evolution from industrial revaluation", which is true for the systems existing onboard ships. Establish with example.

228.

A successful voyage for a Chief Engineer is a combination of trouble free run of machineries optimum use of fuel, minimum interpersonal conflicts and less intervention from shore authorities. Considering the ship as on how this can be best achieved?

Part A: RECORD MAKING 229.

Describe the objective for maintaining records onboard. What are its categories? Enlist the record keeping items under each categories substantiating with reasons. Give an example by which the records generated by the shipboard maintenance activities may also be seen as a database from which valuable management information can be retrieved.

230.

With reference of record keeping onboard, discuss (i) the necessity of proper filing (ii) efficient control of follow up and verification activities (iii) accident investigation.

231.

How do distinguish between necessary and unnecessary records on ship? How the control of record keeping maintained onboard? How the old and unnecessary records are identified and dealt with?

232.

State the importance of maintaining Log Book records during a watch and vessel's stay in port. Elucidate the procedures involved relating entries made for the data's during watching-keeping. Which data records concerned with

main engine you find most important and why? 233.

An accident with a ship relates with a grounding while approaching a port. On an inspection made by a team of surveyors, you are to submit the relevant Log book records for formulating an opinion regarding cause of grounding. Taking figures from real life situations present a case study to underline that machineries were functioning satisfactory.

PART B: SHIPS RECORDS 234.

Name various statutory certificates and documents to be carried on board by all ships giving a reference to the conventions. Apart from these what extra number of statutory certificates are carried in vessel carrying: a) Dangerous goods

b) Chemical Tankers c) Gas Tankers

state them with their related conventions are justify for their requirement. 235.

Differentiate between official log book, supplementary official logs and deck and engine room logs. Highlight their salient-features and differences. Also enlist the number of documents which is handed over by chief Engineer during signing off a vessel.

PART A: CLASSIFICATION SOCIETIES AND THEIR FUNCTIONS 236.

Highlight the role of classification societies in providing set of standards for sound merchant ship construction. Also state the importance of International Association of Classification Societies and how they contribute in improving standards of hull and machineries.

237.

Certain area of inspection of ships is the responsibility of the Government of the country. State and justify the concerned fields. In recent years Classification Societies have been entrusted with some of the statutory surveys as well. Name and explain with reasons.

238.

What are the Date of Expiry of the various statutory Certificates carried on board on all ships. List them giving their reference of Conventions. If a period of a statutory certificate has just expired of your joining a vessel in a port having inadequate survey facility, state the actions you will take to revalidate.

239.

A vessel having continued and repeated crosshead bearing population engine was allowed to reach the one leg of its voyage with the condition of class. As

a Chief Engineer describe the action you will initiate for successful return leg journey. 240.

Briefly explain on the statutory service undertaken by a classification body on behalf of Administration together with its responsibilities and its obligations in the area of client confidentiality. Illustrate with a case study.

241.

Underline the validity of the following statement: i. Classification body as survey societies ii. Classification society as neutral third party iii. Classification society as "Recognized " iv. Classification society and duty of confidentiality.

242.

Emphasis the validity of the statement that "Classification societies are Recognized Institutions (RO). In your view if the statement carries some limitation highlight them with reasons. List the statutory service undertaken by a classification body on behalf of Administration.

243.

As a Chief Engineer on a fully loaded ship you are stranded in an island near UK coast having no survey facility where the forepeak of the vessel is severely damaged. Explain your reciprocator actions with reasons and the procedures to be adopted for making a safe return voyage to India.

244.

What is meant by FSQC? How this is maintained by classification bodies? Explain the area of related services as offered by classification bodies in case of (i) Towing voyage inspection (ii) Equipment approval

245.

What are the principal functions conducted by a classification body towards survey / management of high speed crafts? In which way these surveys differ from conventional ship surveys?

246.

Apart from statutory surveys, what all other surveys can be undertaken by a classification body for a ship? What are the limitations for the society in these cases? Enlist them and emphasis how these cases are taken care of.

247.

Differentiate between statutory classification and regulatory service. List under these categories the surveys which are to be conducted (i) every six months (ii) every year (iii) every thirty months (iv) every four years & (v) every five years.

248.

Differentiate between annual, intermediate, renewal, damage and repair surveys. What is the purpose of each survey onboard? Also enlist all statutory certificates carried onboard, their issuing authority, and the basis of Conventional / Act of such certificates.

249.

(a) Define the meaning of the term "Conditional of Assignment" as applied to ships. (b) State how conditions of assignment contribute towards water integrity of ships. (c) Give reasons why conditions of assignment need periodic inspection, giving specific instances where they can be found to be less than fully effective.

250.

What is the purpose of annual surveys? Give a list of items that would be examined by a surveyor during annual surveys. Also explain Condition of Class. What impact condition of class has on a ships commercial / technical aspect?

251.

Differentiate between harmonized system surveys and enhanced hull survey system. Since when these systems have come in force. What all statutory certificates are issued under HSSC? List the periodicity of all certificates issued under HSSC.

252.

To ensure that a ship remains worthy of its 100 Al classification, annual and special surveys are carried out by classification surveyors. Detail the parts of the ship that would be examined during each of the following (a) annual survey (b) special survey.

253.

Differentiate between continuous hull surveys (CHS) and enhanced hull survey system. What advantage CHS provides to the ship owner? Underlining the salient features of enhanced survey program and explain "Planning of Survey", "Close - up Examination" and "Overall Survey".

254.

Emphasize computer aided survey and how it helps in monitoring the health of a ship. Underline its salient purpose, date of implementation and different discipline of activities that could be undertaken. Explain the term "Survey Status".

255.

Protective coating has come into a lot of debate in recent years. With reference to seawater ballast tanks how the condition is assessed for paint coatings and how grading is done by society surveyors. Outline the problem that occur with self polishing copolymer paints when a vessel is at anchor for long periods or proceeding at reduced speed.

256.

Enlist the salient items consisting additional survey for tankers. On examination of tankers hull in a dry dock some areas covered with paint were found damaged. Describe a procedure for repair of the said area precautions taken thereof.

257.

Describe the differences and features of hull surveys of a very large crude carrier compared to a conventional one. Which zone / tanks / .components are awarded special precaution while carrying out bulk carrier survey?

PART B: INVENTORY MANAGEMENT 258.

You are to formulate a Quality Inventory Management Plan for old ship's stores / spares, where you have joined as Chief Engineer. Describe the procedures you will adopt and the key issues you will address for successful completion of the assignment within a targeted date.

259.

What is meant by "lead time" in inventory management of ship's spares / stores? Explain the terms (i) Average due data (ii) average job tardiness as applicable in inventory management of ship's spares / stores. As a Chief Engineer on a ship describe the actions you will undertaken to reduce the lead time in inventory management.

260.

Describe method of documentation of recording inventory management and control under Quality system. As a Chief Engineer onboard how would you maintain a record of spares becoming obsolete and to retrieve information regarding current strength of spares / stores. Describe the methodology with proper heads and method of record keeping.

PART A - EMERGENCY PREPARDNESS 261.

Establish relation between implementation of ISM code and emergency preparedness. Enlist the documented procedures are maintained onboard for potential emergency situations. Illustrate one such procedure highlighting its format, entries and the location where it is maintained onboard.

262.

The vessel where you are posted as Chief Engineer is undergoing drydocking and a serious fire occurs on the deck because of welding work. Illustrate the documented procedures to deal with such emergency and its advantage over non documented actions? Explain the different ship related contingencies against which document procedures are maintained under emergency preparedness of ISM Codes. *In case of a major pollution of oil from a ship how best the contingency plans in emergency preparedness help over other actions.

263.

Explain the different machinery related emergency situations that are dealt as documented procedures under "emergency preparedness". Underline the salient actions that are documented in dealing with (i) Main Engine Failure (ii) steering failure (iii) electrical failure (iv) automation failure.

264.

Highlight the importance of programmes for drills and exercises under emergency preparedness. What all emergency situations are considered under combined drills involving companies and ships personnel and why?

265.

State the involvement and responsibility of the office in enforcing 'emergency preparedness" procedures for a ship and personnel. What advantage dose it have under ISM codes? Describe the duties of the office in (i) forming the emergency team (ii) emergency situations (iii) maintaining contact between ship and office (iv) use of ships relevant information.

266.

Piracy and terrorism is a fearsome situation for shipboard personnel and frequent in present shipping activities. As a Chief Engineer onboard and as a member of SMS implementation team, draw an emergency preparedness plan to encounter such situations involving ships personnel. What measures can be responded by shipboard under contingency plan while the vessel is (i) at port (ii) at sea?

267.

Establish relation between SOLAS and "emergency preparedness". Identifying the concerned chanter of SOLAS illustrate how the specific chapter deals with defining emergency preparedness and its list of activities. When this chapter was adopted and when it entered into force.

268.

With reference to "emergency preparedness", discuss (i) Search and Rescue (ii) Evacuation of critically injured personnel (iii) Helicopter operations (iv) rescue from enclosed spaces (v) Abandon ship.

269.

Underline the importance of "communication" in 'emergency preparedness". Under said head, discuss contingency plans for the office involving (i) contact between ship and the office (ii) communication equipment (iii) dealing with the media (iv) dealing with relevant next of kin.

270.

In case of a major fire onboard, explain the salient advantages of documentation under "emergency preparedness" over normal fire fighting procedures, "before implementation of the said code the fire fighting operations onboard have successfully carried out in numerous cases" with the context of the statement give your recent opinion for requirement of documented plans under "emergency preparedness".

271.

The ship has grounded on shallow waters near a port. Describe the actions that would commonly be laid out in a contingency plan under "emergency preparedness" and its specific advantage over non-follow-up of such system.

272.

A ship which was bunkering at a foreign port has met with an accident and a substantial amount of oil spillage in water has resulted. Draw an emergency preparedness plan for the incident and how best it could be encountered under the provision. Describes its salient advantages.

273.

Establish a relation between emergency preparedness, MARPOL 73/78 and National Administration, how the presence of MARPOL 73/78 and "Administration" help in formulating personnel will have in adhering to procedures under emergency preparedness?

274.

With reference to "emergency preparedness" write short notes on (i) role of SOLAS 74, MARPOL 73/78 and National Administration (ii) role of office (iii) advantage of drills and exercises (iv) documented procedures.

PART B: COAST GUARD 275.

Enumerate the different activities and rights of national coast guard. With reference to coast guard activity explain (i) controlling vessel traffic / waterways (ii) inspection of flag state and foreign ships (iii) general maritime law and treaty enforcement.

276.

Enumerate the area of activities / enforcement of coast guard towards (i) Law enforcement (ii) drug interdiction (iii) port and waterway security.

277.

With reference to marine pollution prevention, discuss the role enacted by coast guard of coastal waters. Briefly explain the action undertaken by coast guard in prevention of marine pollution and its enforcement.

PART A CHARTERING AND GENERAL AVERAGE 278.

In Maritime terms what is : a) Charter Party b) Freight

c) Bare of Lading d) Charter Party Clause.

279.

Differentiate between Voyage Charter and Time Charter of a vessel. Underline the changes in responsibilities and the scope of activities for a Chief Engineer in each case.

280.

What are the basic contracts used in Marine Transportation? What are the basic elements of the Time Charter Party and Demise (Bareboat Charter

Parties?) In your opinion where lies the conflicts between chartering and Maritime Law? 281.

Eate the influences of a Charterer on operation of propulsion and other shipboard machineries during a voyage. A ship on a time charter if met with several unforeseen machinery breakdowns due to which the scheduled date cannot be met with, state the different options and actions a Chief Engineer on board should undertake.

282.

Differentiate the salient consideration taken during survey of a ship under (i) bare boat charter (ii) voyage charter (iii) time charter. As a Chief Engineer on board explain with reasons which of the three surveys is most demanding and exhaustive and why?

283.

During Periodic survey of a crosshead bearing of main engine, a condition of class was imposed by the survey authorities and the vessel was allowed to sail under said status till the next port of call. As a Chief Engineer of the vessel enumerate and explain the consequences and actions to be reciprocated of behalf of owner of the ship and also what all penalties are attracted if these are not duly followed up?

284.

Your company is planning to buy an old ship stationed at a foreign port and to put the vessel immediately on bareboat charter. On your placement as Chief Engineer on the said vessel, enlist and explain the series of inspections / examinations / inventories you will make towards preparation of such charter voyage.

285.

What are the basic criteria in cargo carriage under bills of loading and related documents? Explain the procedure towards issue of bills of lading, what are the obligation of the carrier and shipper under bills of lading. What happens in the case of part of cargo getting lost or damaged?

PART B : PORT STATE AND FLAG STATE CONTROL 286.

Explain "Port State Control(PSC)". Underline its authority for exercising and the basis of such inspections. Enumerate the relevant regulations article and annexes of SOLAS 74, LOAD LINES 66, MARPOL 73/75, STCW 78 and TONNAGE 69, which forms the provisions for PSC.

287.

Explain the jurisdiction of application of PSC and its control regulations. State the salient clauses from different International Conventions that forms the basic focus area of PSC.

288.

What provisions are kept under PSC towards (i) Certificates issued by non party states to their ships (ii) Inspection of ships below convention size and (iii) Amendments to procedures for PSC adopted in 1981.

289.

With reference to PSC illustrate the following (i) Regional cooperation / agreements (ii) the goal of future PSC (iii) Technical assistance by IMO under resolution adopted in Nov. 1991 Conference. -- &&&&&&&&&&&& -

VOLUME-2

Question Bank For

MEO CLASS -1 COURSE

NATIONAL MARITIME ACADEMY (Formerly NATIONAL INSTITUTE OF PORT MANAGEMENT) East Coast Road, Uthandi, Chennai 600 119.

EXAMINATION OF MARINE ENGINEER OFFICER Function: Marine Engineering at Management Level ENGINEERING MANAGEMENT M E O. Class I (Time allowed - 3hours) India (2005)

NB :

Morning Paper

Total Marks 100

(1)

Answer SIX Questions only

(2)

All Questions carry equal marks

(3)

Neatness in handwriting and clarity in expression carries weightage

1.

List the amendments to the existing Conventions of IMO to come into force in the year 2005. Briefly describe the amendments. What changes are likely to be foreseen on ship operation world wide on implementation of these amendments.

2.

Differentiate between "third party liability" and "contractual liability". When may the ship owner seek to limit his liability.

3.

List the methods and aids to prevent pollution of the environment by ships under IMO Conventions and steps you can take for its successful implementation on a ship prior its voyage, where you have joined as Chief Engineer.

4.

What is a general average act? Name the essential features of a general average act.

5.

Differentiate between official logbook, deck and engine room log books. Highlight their salient features and differences. Also, enlist the number of documents, which are handed over by relieved Chief Engineer during signing off from a vessel.

6.

Differentiate between annual, intermediate, renewal, damage and repair surveys. What are the purposes of each survey onboard? Also, enlist all statutory certificates carried onboard, their issuing authority, and the IMO Convention under which they are issued.

7.

A ship on which you have joined as Chief Engineer is scheduled to be put in active service after major lay-up and necessary repairs. State, the preparation and trials you would conduct prior offering the ship to the surveying

authorities for survey and inspection. 8.

Discuss the contribution of the following factors on ship in identification of proper training for a specific task performed (i) Internal Audits (ii) Emergency drills (iii) Previous training and experience (iv) Familiarization with new equipment.

9.

A successful voyage for a Chief Engineer is a combination of trouble free run of machineries, optimum use of fuel, minimum interpersonal conflicts and less intervention from shore authorities. Considering the ship as an , give in detail how can this be best achieved.

—XXXXX—

EXAMINATION OF MARINE ENGINEER OFFICER Function : Marine Engineering at Management Level ENGINEERING MANAGEMENT

India (2005) NB :

MEO. Class I (Time allowed - 3hours) Morning Paper

Total Marks 100

(1) Answer SIX Questions only (2) All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carries weightage

1.

Differentiate between Rules, Regulations, Protocol, Act, tacit acceptance and Convention as adapted in IMO. Describe the process by which a Draft proposal gets convened into a Rule administered by a maritime member country?

2.

As a Chief Engineer on a vessel scheduled to make a voyage from India to the U.S. Coast. list the salient items you will inspect, machinery installations you will ensure for satisfactory operation and documents you will keep handy for making a satisfactory voyage. Give reasoning in each case.

3.

What are the UNCLOS provisions concerning ship's flag and nationality? In observation of UNCLOS what are the duties of flag states and how it is enforced?

4.

With reference to "ISM Code" write short notes on:

5.

(a)

Role of company office

(b)

Advantage of drills and exercises

(c)

Documented procedures

(d)

Management Review

With respect to engine room man management enlist the key issues

you will address with proper justification in the following areas: (a)

Training programmes

(b)

Long term personnel development concept

(c)

Attitude and motivation development

(d)

Emergency response

6.

A successful voyage for a Chief Engineer is a combination of trouble free run of machineries, optimum use of fuel, minimum interpersonal conflicts and less intervention from shore authorities. Considering the ship as an Organisation how this can be best achieved.

7.

Emphasize the validity of the statement that "Classification Societies are Recognised Institutions (RO). In your view if the statement carries some limitation highlight them with reasons. List the statutory service undertaken by a classification body on behali of Administration.

8.

A second hand single hull VLCC built in 1990 is to be taken over. The vessel is to be registered under Indian flag, as Chief Engineer/ Owner representative, what aspects you would look for, with respect to:

9.

(a)

SOLAS 74

(b)

MARPOL 73/78

(c)

Crew accommodation

(d)

Machinery/boilers

(e)

Previous survey report

Differentiate the salient consideration taken during survey of a ship under (a)

Bare boat charter —XXXXX—

EXAMINATION OF MARINE ENGINEER OFFICER Function : Marine Engineering at Management Level ENGINEERING MANAGEMENT MEO. Class I (Time allowed - 3 hours) Morning Paper. India (2005)

Total Marks 100

NB : (1)Answer SIX Questions only (2)All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carries weightage

1.

Your vessel where you are posted as Chief Engineer is about to enter a dry dock. State the coordination and exchange of information necessary with the Master of the vessel for entering the dock. Also, list the necessary preparations required along with the delegation of responsibilities to the engineers of the vessel. Enlist the inspections and co-ordinations you will make with the dry dock authorities for undocking of the vessel.

2.

List the methods and aids to prevent pollution of the environment by ships under IMO Conventions, and steps you can take for its successful implementation on a ship prior its voyage, where you have joined as Chief Engineer.

3.

For an ISM certification, explain the key clauses, which are needed to be complied with? State the factors and commitment from a Chief Engineer and company to have SMS implemented successfully on board ship.

4.

State the different types of Marine Insurance policies that could be undertaken by owners, shippers or other related parties. Explain the salient liabilities and exclusions related with ach case for an insurer.

5.

Explain the key features of the United Nations Convention On the Law of The Sea? Enumerate the various areas covered under this convention?

6.

State the elements of strategies needed for improving performance from a team of . engine room personnel looked upon as as» Organisation. Underline the steps taken to reduce mutual conflict and clarify their role/responsibility?

7.

Illustrate ship repair management and its objectives. List the services under ship repair management and highlight the same with (i) Assessment of ship repair quotations (ii) Supervision during repairs (hi) Coordination with classification society and flag Administration (iv) Necessary trials and testing (v) Full report on actual repairs effected for record purposes.

8.

State the action, which will be taken by the Administration/Classification society towards handling of an ISM certificate in case,

9.

(a)

When a major non-conformity is observed.

(b)

When corrective action has not been taken to the nonconformities raised during external audit, within the time period.

(c)

What circumstances may Icad to withdrawal of SMC/DOC

(d)

When a newly formed shipping company requests for interim DOC certificate.

Piracy and terrorism is a fearsome situation for shipboard personnel and frequent in present shipping activities. As a Chief Engineer onboard and as a member of SMS implementation team, draw an emergency preparedness plan to encounter such situations involving ships personnel. What measures shipboard personnel can take under contingency plan while the vessel is (i) in a port (ii) at sea?

—XXXXX—

EXAMINATION OF MARINE ENGINEER OFFICER Function : Marine Engineering at Management Level ENGINEERING MANAGEMENT

India (2005) N3 :

M E O. Class I (Time allowed - 3 hours) Morning Paper

Total Marks 100

(1) Answer SIX Questions only (2) All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carries weightage

1.

(a) What are the various statutory Certificates carried on board oil tanker, and their validity? Mention the Conventions under which they are issued, giving the reference of their Conventions. (b) Explain Harmonization of Statutory Certificates under the SOLAS 74/88 Convention. If a period of a statutory Certificate has just expired and a port is having inadequate survey facility, state the actions you will take, as per the provision stated in the Protocol of 1998 relating to the International Convention for the Safety of Life at Sea, 1974.

2.

Explain Hull Claims and Cargo Claims related with Marine Insurance. State the related documents highlighting their validity, and information required from the ships in this regard.

3.

Classification societies are Recognized Institutions (RO) and play an important role in Implementation of national and international regulations. State the limitations of the RO highlighting them with reasons. List the statutory service undertaken by a classification body, on behalf of Administration.

4.

On a ship where you are employed as Chief Engineer, the vessel has UMS system for controlling engine room and a central scanning and data logging system for monitoring. Explain the special attention you will pay to the specific datas and formulate a chart for condition monitoring. Highlight the tools in computer application you wilt use f for making graphical representation, salient points and trend analysis.

5.

Explain the associated key factors and activities to ensure successful Planned Maintenance programme onboard ships under ISM Codes with the following terms: (i)

Corrective action process

(ii)

Developing and improving maintenance procedures

(iii)

Systematic approach to maintenance

(iv)

Maintenance intervals

(v)

Inspections

6.

With reference to record keeping onboard, discuss (i) the necessity of proper filing (ii) efficient control of follow up and verification activities (iii) accident/incident investigation. Describe a situation onboard, which will highlight the importance of record keeping of above three cases.

7.

STCW 95 has laid down minimum requirements for familiarization, basic safety training and instruction to all seafarers. Underline the importance of the role of Chief Engineer of a ship in enforcing these elements of STCW training.

8.

Stress is one of the factor effecting the performance of an individual. What are the primary strategies for coping with stress affected personnel? How these elements can be best implemented in ships personnel motivating them for better team work?

9.

As per MARPOL Annexe VI 73/78, which came into force from 19 May, 2005, all bunker suppliers are required to be registered with the Administration and bunker supply is to be received from the registered bunker supplier only. Enumerate the salient features and the requirements set out in Regulation 14 and 18 of MARPOL. Annex VI and the responsibilities of Chief Engineer with respect to retaining of bunker sample. —XXXXX—

EXAMINATION OF MARINE ENGINEER OFFICER Function : Marine Engineering at Management Level ENGINEERING MANAGEMENT M E O. Class I (Time allowed - 3hours) Morning Paper India (2005) NB :

Total Marks 100

(1)Answer SIX Questions only (2)All Questions carry equal marks (3)Neatness in handwriting and clarity in expression carries weightage

1.

During bunkering of a ship at a foreign port, a substantial amount of oil spillage in water has taken place. Draw an emergency preparedness plan for such incidents and how best it could be encountered under the situation.

2.

With reference to "emergency preparedness", discuss (i) Search and Rescue (ii) Evacuation of critically injured personnel (iii) Helicopter operations (iv) Rescue from enclosed spaces (v) Abandon ship.

3.

The vessel where you are posted as Chief Engineer is undergoing drydocking and a serious fire occurs on the deck because of welding work. Illustrate the documented procedures to deal with such emergency and its advantage over non documented actions. Explain the different ship related contingencies against which document procedures are maintained under emergency preparedness of ISM Codes.

4.

Explain "Port State Control" (PSC) Inspection. Underline its authority for exercising and the basis of such inspection. Enumerate the relevant regulations article and annexes of SOLAS 74, LOAD LINES 66, MARPOL 73/78, STCW 78 and TONNAGE 69 which forms the provisions for PSC.

5.

Illustrate the salient factors for "onboard training" and standard of competence as laid out in STCW 95 Chapter III. Underline the specific rules a Chief Engineer needs to perform towards satisfactory training

of engine room personnel under the Regulation. What will be the criteria for evaluating competence for onboard training by a Chief Engineer? 6.

Detail the Inspection that you as the new Chief Engineer of a passenger ship, would make on joining the ship with regard to (i) Stability (ii) Damage control (iii) Fire Fighting (iv) Critical Machinery.

7.

What are the primary strategies for coping with stress affected personnel. How these elements can be best implemented in ships personnel motivating them for better team work?

8.

Socio-Cultural difference have been an accepted fact in major merchant ships around the globe. Explain how such differences generate inter personnel conflict and affect safety management. How they can be resolved on board?

9.

Give a brief background of ILO, its inception and its fields of mandate for Maritime Labour, which has come in force in 1996.

—XXXXX—

EXAMINATION OF MARINE ENGINEER OFFICER Function : Marine Engineering at Management Level ENGINEERING MANAGEMENT M.E.O. Class-1 (Time Allowed - 3 Hours) Morning Paper Nov-2006 NB :

Total Marks: 100

(1)

Answer SIX Questions only

(2)

AH Questions carry equal marks

(3)

Neatness in Handwriting and clarity in expression carry weightage

1.

A second hand bulk carrier built in 1998 is to be taken over. The vessel is to be registered under Indian flag. As Chief Engineer / Owner representative, what aspects you would look for, with respect to :

2.

What are the principles of modern salvage law? What is general average? Explain with context to general average (i) Entitlement (ii) Artificial (iii) Adjustment (iv) Contestation.

3.

List the objectives of an ISM External Audit of a ship? How does an Internal Audit help in External Audit of a vessel? Name the salient issues addresses in the External Audit and the persons responsible to carry out the same.

4.

Explain "Port State Control" (PSC) Inspection. Underline its authority for exercising and the basis of such inspections. Enumerate the relevant regulations article and annexes of SOLAS 74, LOAD LINES 66, MARPOL 73/78, STCW 78 and TONNAGE 69, which forms the provisions for PSC.

5.

(a) What are P&I clubs? Describe how P&I clubs collect fund from ship-owners, (b) What are the risk that are covered under the term "protection" and 'indemnity'

6.

Illustrate the salient factors for "on board training" and standard of competence as laid out in STCW 95 Chapter III. Underline the specific roles a Chief Engineer needs to perform towards satisfactory training of engine room personnel under the Regulation. What will be the criteria for evaluating competence for on board training by a Chief Engineer?

7.

Underline the general procedures followed for flow of information among ships person. As a Chief Engineer on a ship having multinational crew, state how the process of effective information to the team can be approached by you and also how a certain instruction received by you and shore office for engine management can be best utilized?

8.

With reference to project cost estimation ; awards a major ship repair with multiple activities, explain (i) Cost groups (ii) Cost parameters (iii) Work breakdown structure (WBS) How best in your opinion do these modules assist towards an optimum ship repair cost estimation?

9.

Write short notes on the following any THREE (a) Lloyd's Open Form (b) Bill of Loading . (c) Treaty, Convention and Protocol.

—XXXXX—

EXAMINATION OF MARINE ENGINEER OFFICER Function : Marine Engineering at Management Level ENGINEERING MANAGEMENT M-E.O. Class -1 (Time Allowed - 3 Hours) Morning Paper October-2006 NB :

Total Marks: 100

(1) Answer SIX Questions only (2) AU Questions carry equal marks (3) Neatness in Handwriting and clarity in expression carry weightage

1.

As a Chief Engineer you have joined a vessel which is about to undertake a six month round voyage. Underline and describe the key areas that you will inspect, check, prepare, establish and maintain towards proper Planned Maintenance of Engine Room Machineries and associated areas, under ISM Codes.

2.

With respect to engine room "Resource Management" enlist the key issues you will address with proper justification in the following areas (i) Incentive programmes (ii) Long term personnel development concept (iii) Human resources quality assurance (iv) Attitude and motivation development (v) Emergency response.

3.

As a Chief Engineer describe the procedure you would employ for bunkering at a port for ascertaining/receiving correct grade/quantity of oil from the shore supply authorities. In case of a dispute over lube oil/fuel oil received on board, describe the actions you will take under circumstances. What are the applicable provisions under MAPOL 73/78, Annex VI Regulations

4.

What provisions are made under Port State Control (PSC) towards (I) Certificates issued by non party states to their ships (ii) Inspection of ships below conventi9n size and (iii) No mere favorable treatment.

5

Differentiate the salient features during survey of a ship under (j) Bare boat. charter (ii) Voyage charger (iii) Time charter. As a Chief I

Engineer on board explain with reasons which of the three surveys is most demanding and exhaustive and why? 6.

Explain the influence of following external factors in higher consumption of fuel oil and how at best they could be controlled? (i) Ship's hull condition (ii) Weather condition (iii) Maintenance of different elements in fuel oil system (iv) Damage to propeller blades.

7.

As per the Marine Insurance Act, write short notes on the following : a. Deviation b. Warranties c. War Risk Clause d. Charterers Contribution Clause.

8.

A second hand single hull VLCC built in 1990 is to be taken over. The vessel is to be registered under Indian flag. As Chief Engineer / Owner representative, what aspects you would look for with respect to : a. b. c. d. e.

9.

SOLAS 74 MARPOL 73/78 Crew accommodation Machinery / boilers Previous survey report

What are the UNCLOS provisions concerning ship's flag and nationality? In observation of UNCLOS what are the duties of flag states and how are they enforced?

—XXXXX—

EXAMINATION OF MARINE ENGINEER OFFICER Function: Marine /engineering at Management Level ENGINEERING MANAGEMENT M.E.O. Class- I (Time Allowed - 3 Hours) Morning Paper Septem-2006

Total Marks

100

NB :

(1) Answer SIX Questions only (4) AH Questions carry equal marks (5) Neatness in Handwriting and clarity in expression carry weightage

1.

State the action taken by a Recognized towards handling of an ISM certificate in case; (i) Evidence of a major non-conformity (ii) Evidence of too many non-conformities (iii) extension of the safety management certificate is requested for (iv) Revision of an entry for a certificate is requested for . Under what circumstances can the SMC and DOC be withdrawn.

2.

(a) State the importance of maintaining vessels records at sea and at port. Elucidate the procedures involved relating to entries made for the data's during watch keeping. (b) List the records which are maintained with respect to various inspection carried out in a bulk carrier by the classification society.

3.

What is the purpose of annual surveys of ships? Give a list of items that would be examined by the surveyor during annual survey. AJso, explain condition of class (COC). What impact does a COC have on a ships commercial/technical aspect?

4.

As a team leader and resource manager, identify the issues that could be addressed for maximum utilization of potential of technical personnel on board ships. List the methods and aids to prevent pollution of the environment by ships under IMO Conventions and steps you can take for us successful implementation on a ship, prior its voyage, where you have joined as Chief Engineer

5.

Discuss the procedure of entry in to force of an IMO Convention after

its Adoption State the provision and its importance towards entry into force of the convention. For a convention of important technical nature state the general rules / conditions observed by the states for its entry into force. Explain the terms (i) Accession (ii) Signature subject to Ratification, acceptance of approval. 6.

Illustrate ship repair management and its objectives. Enlist the list of services under ship repair management and highlight with (i) Assessment of ship repair quotations (ii) Supervision during repairs (iii) Co ordination with classification society and Flag Administration (iv) attendance if necessary trials and testing (v) Full report on a actual repairs effected for record purposes.

7.

Describe the methodology you will practice during taking over/handing over of your vessel in a foreign port as a Chief Engineer towards inventory management of lube oil/fuel oil on board. In case of dispute arising thereof, describe how it can be best solved? During the circumstances how you would ascertain amount of oil not fit for use9

8.

As a Chief Engineer on a ship where you have joined recently, develop a training programmed for shore related activities of a vessel. Highlight the specific training needs and emergency measures for engine room personnel in the dry dock in case of (i) transfer of fuel oil from tank to tank (ii) fire (iii) explosion in the engine room.

9.

Differentiate between Voyage Charter and. Time Charter of a vessel. Underline the changes in responsibilities and the scope of activities for a Chief Engineer in each case.

—XXXXX—

EXAMINATION OF MARINE ENGINEER OFFICER Function : Marine Engineering at Management Level ENGINEERING MANAGEMENT M.E.O. Class - 1 (Time Allowed - 3 Hours) Morning Paper Dec-2006

Total Marks : 100

NB :

(1) (2) (3)

Answer SIX Questions only All Questions carry equal marks Neatness in Handwriting and clarity in expression carry weightage

1.

Discuss the responsibilities of the Chief Engineer of the vessel with respect to the following. a. Bunkering and receiving correct quantity of fuel oil b. In case of a dispute over lube oil / fuel oil received on board, actions required under the circumstances. c. Spillage of oil in the water during bunkering.

2.

The safety management system requires that company should provide for measures ensuring that the Company's can respond at any time to hazards, accidents and emergency situations involving ships. Underline the importance of 'communication' in 'emergency preparedness' and what measures are required for the following (i) contact between ship and the office (ii) communication equipment (in) dealing with the media (iv) dealing with the next of kin.

3.

Explain the influence of following external factors in higher consumption of foe! oil and how they could be controlled? (a) condition of ship's hull (b) weather condition (c) maintenance of different elements in fuel oil system

4.

Discuss the responsibilities of the Chief Engineer with respect to an appropriate training plan for engine room personnel towards successful handling of (i) major fire in engine room and wheelhouse (ii) automation failure of main engine in UMS mode (iii) Steering failure (iv) electrical power failure

5.

With respect to key issues in ship repair contracts, illustrate (i) payment terms (ii) Amount of the specification and additional works (iii) contract period, liquidated damages and force majeure (iv) Guarantees and insurance (v) Termination events.

6.

(a) Explain the salient features of Ballast Water Management (n) How would you as Chief Engineer with consultation with the Master of the vessel implement a typical "Ballast Water Management Plan" prior to your vessel arriving at an USA port.

7.

Safety of Bulk carriers is a major concern being addressed by IMO State what are the recent additional safeties measures incorporated in to SOLAS 74 as amended for Bulk carriers in Ch. XII List out the main items under enhanced survey of a 15 years special survey for a Bulk carrier.

8.

Write short notes on a. World scale b. Maritime Lien c. B1MCO

9.

Describe briefly Port State Control and its role in elimination of substandard ships. Is Port State Control effective? —XXXXX—

EXAMINATION OF MARINE ENGINEER OFFICER Function: Marine Engineering at Management Level ENGINEERING MANAGEMENT

M.E.O. Class I (Time allowed - 3hours) Morning Paper India (2007)

Total Marks 100

NB :

(1) Answer SIX Questions only. (2) All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carry weightage

1.

Differentiate between "third party liability" and "contractual liability". When may the ship owe: seek to limit his liability.

2.

(a) What are P & I clubs? Describe how ¥ &X clubs collect fund from ship-owners. (b) What axe the risk that are covered under the term " protection" and "indemnity".

3.

Detail the inspection that you as the new Chief Engineer of an Oil Tanker/ Gas Carrier would make on joining the ship with regard to (i) Stability (u) Damage control (iii) Fire fighting (iv)Critical-Machinery.

4.

State the different types of Marine Insurance policies, that could be undertaken by owners, shippers or other related parties. Explain the salient liabilities and exclusions related with each case for an insurer.

5.

Socio-Cultural differences have been an accepted fact in major merchant ships around the globe. Explain how such differences generate inter personal conflict and affect safety management. How they can be resolved on board for better team work

6.

Give a brief background of ILO, its inception and its fields of mandate for 'Maritime Labour: Development. Name .three-conventions/ protocol of ILO concerning maritime labour, which ha: come in force in 1996.

7.

With respect to 6ngine room man management enlist the key issues you will address with proper justification in the following areas; (a) (b) (c) (d) (e)

Training programmes. Long term personnel development concept. Attitude and motivation development. Emergency response. Copying with stress

8.

Explain "Port-State Control" (PSC) Inspection. Underline its authority for exercising and the basis of such inspections. Enumerate the relevant regulations article and annexes of SOLAS 74, LOAD LINES 66, MARPOL 73/78, STCW 78 and TONNAGE 69, which forms the provisions for PSC.

9.

Differentiate the salient consideration taken during survey of a ship under; (a) Bare boat charter (b) Voyage charter (c) Time charter. As a Chief Engineer on board explain with reasons which of the three surveys is most demanding and exhaustive and why? -XXXXX-

EXAMINATION OF MARINE ENGINEER OFFICER Function: Marine Engineering at Management Level ENGINEERING MANAGEMENT M.E.O. Class (Time allowed - 3hours) Morning Paper

India (2007)

Total Marks 100

NB:

(1) Answer SIX Questions only. (2) All Question carry equal marks (3) Neatness in handwriting and clarity in expression carry weightage

1.

As a Chief Engineer describe the procedure you, would employ for bunkering- at a port for ascertaining / receiving correct grade/ quantity of oil from the shore supply authorities. In case of a dispute over lube oil / fuel oil received on board, describe the actions you will take under circumstances. What are the applicable provisions under MAPOL 73/78, Annex VT Regulations?

2.

What are the UNCLOS provisions concerning ship's flag and nationality? In observation of UNCLOS, what are the duties of flag States and how it is enforced?

3.

Explain the associated key factors and activities to ensure successful planned Maintenance programme onboard ships under ISM Codes with the following terms; (a)

Corrective action process

(b) (c) (d) (e)

Developing and improving maintenance procedures Systematic approach to maintenance Maintenance intervals Inspections

4.

Briefly discuss the reasons for Bulk-Carrier losses in the last decade and explain, how provisions detailed in Chapter XII of SOLAS 74 as amended will contribute towards the safety of bulk-carriers?

5.

As per the Marine Insurance Act, write short notes on the following: (a) (b) (c) (d)

Deviation Warranties War Risk Clause Charterers Contribution Clause.

6.

What are the primary strategies that may be employed for coping with stress-affected personnel? How can these elements be best implemented in ships personnel motivating them for better team work?

7.

Write short notes on any THREE: (a) (b) (c) (d)

Lloyd's Open Form General Average and Particular Average Bill of Lading Treaty, Convention and Protocol

8.

Illustrate the salient factors for "onboard training" and standard of competence' as laid out in STCW 95 Chapter ITI. Underline the specific roles a Chief Engineer needs to perform towards satisfactory training of engine room personnel under the Regulation, What will be the criteria for evaluating competence for onboard training by a Chief Engineer-;?

9.

Detail the inspection that you as the new Chief Engineer of a passenger ship, would make on joining the ship with regard to (i) Stability (ii) Damage control (iii) Fire fighting (iv) Critical Machinery.

-XXXXX-

EXAMINATION OF MARINE ENGINEER OFFICER Function: Marine Engineering at Management Level ENGINEERING MANAGEMENT M.E.O. Class I (Time allowed - 3hours) Morning Paper India (2007)

Total Marks 100

NB:

(1) Answer SIX Questions only (2) All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carries weightage

1.

State the requirement and responsibility of the office in enforcing "emergency preparedness" procedures for a ship and its personnel, as required under ISM Codes? Describe the duties of the office in. (i) Formation of the emergency team (ii) During emergency situations (iii) Maintaining contact between ship and office.

2.

With reference port State control enumerate on the following (i) Regional cooperation / agreements, (ii) Future of port State control. (iii) Is port State control an effective tool for ship safety?

3.

Develop a training programme for activities of a vessel, where you have joined recently as a Chief Engineer highlighting the specific training needs for engine room personal in case of (i) use of life saving appliances (ii) fire in accommodation (iii) explosion in engine room, when the ship is in dry dock..

4.

Illustrate the provision kept towards establishing procedures to identify and testing of "critical" equipments under ISM Codes. How the list of critical equipment and systems are made and on what factors they are dependent.

5.

Suggest with reasons, why each of the following courses of action axe appropriate if a ship is operating in heavy seas : (a) frequently sound all hold bilges (b) frequently sound bilges in chain locker, fore and aft. peak tanks, cofferdams and other void spaces (c) sound ail fuel, fresh water and ballast tanks (d) if satisfied with (a), (b) and (c) trim ship by the stern and correct any list (e) reduce speed of the main engine .

6.

As Chief Engineer on board, stress the issues you will address for lack of motivation, differences in aptitude and to increase sense of competitiveness for better management and 'effective control?

7.

Differentiate between "third party liability" and "contractual liability" When may the ship owner seek to limit his liability.

8.

State Maritime Declaration of Health and. the requirements of International Health Regulations for persons employed on board ship. State the steps taken by you as Chief Engineer on board for an Engine Room personnel suffering from a contagious disease while on a voyage.

9.

Why does a ship require Marine Insurance cover. Explain Hull Claims and Cargo Claims related with Marine Insurance. State the related documents and information required from the ship in this regard highlighting their validity.

------XXXX------

EXAMINATION OF.MAIUNE ENGINEER OKEJCKR Function; Marine Engineering at Management Level ENGINEERING MANAGEMENT M.E.'O. Class I (Time allowed - 3hours) Morning Paper (India 2007)

Total Marks 100

NB:

(1) Answer SIX Questions only. (2) All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carry weightage.

1.

As a Chief Engineer you have joined a vessel which is about to undertake a six month round voyage. Underline and describe the key areas that you will Inspect, check, prepare, establish and maintain towards proper Planned Maintenance of Engine Room Machineries and associated areas, under ISM Code.

2.

With respect to engine room “Resource Management” enlist the key issues you will address with proper justification in the following areas (i) Incentive programmes (ii) Long term personnel development concept (iii) Human resources quality assurance (iv) Attitude and motivation development (v) Emergency response.

3.

As a Chief Engineer describe the procedure you would employ for bunkering" at a port for ascertaining / receiving correct grade / quantity of oil from the shore supply authorities. In case of a dispute over lube oil / fuel oil received on board, describe the actions you will take under these circumstances. What ore the applicable provisions under MAPOL 73/78, Annex VI Regulations?

4.

What provisions ire made under port stale control (PSC) towards (i)

Certificates issued by non-party States to their ships (ii) Inspection of ships below. Convention size and (iii) No more favorable treatment. 5.

Differentiate the salient features during survey of a ship under (i) Bare Boat charter (ii) Voyage charter (iii) Time charter, As a Chief Engineer on board explain with reasons which of three surveys is most demanding and exhaustive and why?

6.

Explain the influence of following external factors in higher consumption of fuel oil and how at best they could be controlled? (i) Ship's hull condition (ii) Weather condition, (iii)'Maintenance of different elements in fuel oil system (iv) Damage to propeller blades.

7.

As per the Marine Insurance Act, write short notes on the following: (a) Deviation (b) Warranties (c) War Risk Clause (d) Charterers Contribution Clause.

8.

A second hand bulk carrier built in 1990 is to be taken over. The vessel is to be registered under Indian flag. As Chief Engineer / Owner representative, what aspects would you look for with respect to; (a)SOLAS 74 (b)MARPOL 73/78 (c)Crew accommodation (d)Machinery/ boilers (e)Previous survey report

9.

What are the UNCLOS provisions concerning ship's flag and nationality? In observation of UNCLOS what are the duties of flag States and how arc they enforced? ------XXXX------

EXAMINATION OP MARINE ENGINEER OFFICER Function: Marine Engineering at Management Level ENGINEERING MANAGEMENT M. E. O. Class I (Time allowed - 3hours) Morning Paper India (2007) Total Marks 100

NB:

(1) Answer SIX Questions only (2) All Questions carry equal marks (3)Neatness in handwriting and clarity in expression carries weightage

I.

Differentiate between "third party liability" and "contractual liability". When may the ship-owner seek to limit his liability?

2.

List the methods and aids to prevent pollution of the environment by ships under IMO Conventions and steps you can take for its successful implementation on a ship prior its voyage, where you have joined as Chief Engineer.

3.

What is a general average act? Name the essential features of a general average act.

4.

Differentiate between official logbook, deck and engine room log 'books. Highlight their salient features and difference. Also enlist the number of documents, which are handed over by relieved Chief Engineer during signing off from a vessel.

5.

Differentiate between annual, intermediate, renewal, damage and repair surveys. What arc the purposes of each survey onboard? Also, enlist ail statutory certificates carried onboard, their issuing authority, and the IMO Convention under which they are issued.

6.

A ship on which you have joined as Chief Engineer is scheduled to be put in active service after major lay-up and necessary repairs. State, the preparation and trials you would conduct prior offering the ship to

the surveying authorities for survey and inspection. 7.

Discuss the contribution of the following factors on ship in identification of proper training for a specific task performed (i) Internal Audits (ii) Emergency drills (iii) Previous training and experience (iv) Familiarization with new equipment.

8.

A successful-voyage for Chief Engineer, is a combination of trouble free run of machineries, optimum use of fuel, minimum interpersonal conflicts and less intervention from shore authorities, considering the ship as an Organisation, give in detail how can this be best achieved.

9.

Your vessel Where you are posted as Chief Engineer is about to enter a dry dock. State the coordination and exchange of information necessary with the Master of the vessel for entering the dock: Also, list the necessary preparations required along with the delegation of responsibilities to the engineers of the vessel. Enlist the inspections and co-operations you will make with the dry dock-authorities for undocking of the vessel.

-XXXXXXX-

EXAMINATION OF MARINE ENGINEER OFFICER Function: Marine Engineering at Management Level ENGINEERING MANAGEMENT

M. E .O. Class I (Time allowed - 3hours) Morning Paper India (2006-2007)

Total Marks 100

NB:

(1) Answer SIX Questions only. (2) All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carry weightage

1.

You have joined as Chief Engineer on an old vessel, which has been recently purchased by the owners. State the documents and records you will need to check under ISM Code prior to sailing and how this can be achieved within a short period?

2.

Differentiate between Voyage Charter and Time Charter of a vessel. Underline the changes in responsibilities and the scope of activities for a Chief Engineer in each case.

3.

Give a brief history and the necessity towards formation UNCLOS? What are its important highlights? .Under the context explain (i) Territorial Sea (ii)Contiguous Zone (iii) Exclusive Economic Zone (iv)Continental Shelf (v)High Seas.

4.

Apart from statutory surveys, what all other surveys can be undertaken by a classification society for a ship? What are the limitations for the society in these cases? Enlist them and emphasize how these cases are taken care of.

5.

With reference to maintenance discuss how can the skill of the maintenance personnel be improved. How will the development of checklists, help in improving the maintenance function on a ship. Justify your answer.

6.

With reference to inventory, discuss the following;

(a) Advantages of inventory control (b) Is excess inventory counter-productive? (c) Method of control and Computer database. 7.

UNCLOS and SOLAS 74 as amended states that it is mandatory for a flag State to conduct investigation into a marine casualty. Explain in detail with reference to M.S. Act, the authority and responsibility vested with the Administration.

8.

List the IMO Conventions and guidelines dealing with the safety at sea. State how each Convention contributes to the protection of life and property at sea.

9.

(a) Describe the legal significance of certificate of Registry. (b) Enumerate the entries required as per the M.S. Act 1958 amended, to be made in the official logbook

-XXXXX-

EXAMINATION OF MARINE ENGINEER OFFICER

Function: Marine Engineering Management Level ENGINEERING MANAGEMENT M.E.O. Class I (Time allowed - 3hours) Morning Paper India (2006-2007) Total Marks 100

NB:

(1) Answer SIX Questions only (2) All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carry weightage

1.

Describe how ISM code has ensured the "-Role and Responsibility of ship owner" in achieving Safety Management objectives? What importance do you give to the “Owner’s Policy” in Safety Management structure of an organization?

2.

Describe briefly ILO Maritime Labor Convention 2006 (No. 186) which was adopted in February 2006.

3.

What are the main features incorporated under the Salvage Conventions? Explain "No Cure No Pay" and how this was amended by introducing special compensation towards protecting the marine environment?

4.

What is Bill of Lading? What precautions are to be observed before signing a Bill of Lading under voyage charter and time charter?

5.

UNCLOS and SOLAS state that it is mandatory for a flag State to conduct an investigation into any "casualty". Explain in detail with reference to MS. Act, the authority vested with the Government of India and the procedures adopted by a marine board of inquiry.

6.

(a) Explain the salient features of Ballast Water Management Regulations. (b) What is the role of Chief Engineer in the implementation of the

Ballast Water Management plan prior to your vessel arriving at an Australian port. 7.

Briefly discuss the reasons for Bulk hairier losses m me last decade and explain, how provisions detailed in Chapter XII of SOLAS 74, as amended, will contribute towards the safety of bulk-carriers?

8.

As per the Marine Insurance Act, write short notes on the following: (a) Deviation (b) Warranties (c) War Risk Clause (d) Charterers Contribution Clause.

9.

What are the primary strategies that may be employed for coping with stress affected personnel? How can these elements be best implemented in ships personnel motivating them for better team work?

-XXXXX-

EXAMINATION OF MARINE ENGINEER OFFICER Function: Marine Engineering Management Level ENGINEERING MANAGEMENT M.E.O. Class I (Time allowed - 3hours) Morning Paper India (2006-2007) Total Marks 100

NB:

(1) Answer SIX Questions only (2) All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carry weightage

1.

You as Chief Engineer are required to inform your Company with respect to inspection of propellers in the dry dock during which you noticed a surface crack on one of the blades. State the steps taken by you as Chief Engineer for successful handling of the situation.

2.

Differentiate between Rules, Regulations, Protocol, Act, tacit acceptance and Convention as adapted in IMO. Describe the process by which a Draft proposal gets converted into a Rule administered by a maritime member country.

3.

What are the UNCLOS provisions concerning ship's flag and nationality? In observation of/UNCLOS what are the duties of flag states and how are they enforced?

4.

Has "ISM Code" been successful in bringing changes with respect to safety and environment/protection? With your past experience of serving on ships having Safety Management System, ease on the same.

5.

With respect to engine room man management enlist the key issues that you will address, with proper justification, in the following areas; (a) Training programmes

(b) Long term personnel development concept (c) Attitude and motivation development (d) Emergency response 6.

Emphasize the validity of the statement that Classification Societies are Recognized s(RO). In your view if the statement carries some limitation highlight them with reasons. List the statutory services undertaken by a classification body on behalf of Administration.

7.

Your company has deputed you to take over a second hand bulk carrier. The vessel is to registered under Indian flag. As Chief Engineer / Owner's representative, what aspects would you look for, with respect to; (a) SOLAS 74 (b) MAPPOL 73/78 (c) Crew accommodation (d) Machinery/ boilers (e) Previous survey report

8.

Differentiate between “third party liability” and "contractual liability". When may the ship-owner seek to limit his liability? List the persons entitled to limit liability and the claims exempted from limitation.

9.

Socio-Cultural differences have been an accepted fact in major merchant ships around the globe. Explain how such differences generate inter personal conflict and affect safety management. How they can be resolved on board? -XXXXX-

EXAMINATION OF MARINE ENGINEER OFFICER Function: Marine Engineering Management Level ENGINEERING MANAGEMENT M.E.O. Class I (Time allowed - 3hours) Morning Paper India (2006-2007) Total Marks 100

NB:

(1) Answer SIX Questions only (2) All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carry weightage (4) All unused pages of Answer script must be cancelled out by two lines (X) across the page.

1.

While approaching a port an accident took place, resulting in grounding of the vessel. A team of surveyors carried out inspection of the vessel and official records. Company has advised you to submit the report along with the relevant Log book records for formulating an opinion regarding cause of grounding. In case the grounding was not 4ue to machinery failure, same may be brought out in the report to underline that machineries were functioning satisfactorily.

2.

(a) State the circumstances which may lead to Suspension or Withdrawal of Class (b) Explain the terms used by the classification societies: (i) Period of Class, (ii) Anniversary date, (iii) Survey time window, (iv) Memoranda, (v) Recommendations.

3.

Explain the different machinery related emergency situations that are dealt as documented procedures under "emergency preparedness". Underline the salient actions that are documented in dealing with (i)

Main Engine Failure (ii) Steering failure (iii) Boiler automation failure (iv) Scavenge fire. 4.

Illustrate the provision kept towards establishing procedures for identification and testing of "critical" equipment under ISM Code. How the list of critical equipment and systems are made and on what factors are they dependent?

5.

Suggest with reasons, why each of the following courses of action are appropriate if a ship is operating in heavy seas: (a)frequently sound all hold bilges (b)frequently sound bilges in chain locker, fore and aft. peak tanks, cofferdams and other void spaces (c)sound all fuel, fresh water and ballast tanks; (d)if satisfied with (a), (b) and (c) trim ship by the stern and correct any list (e)reduce speed of the main engine.

6.

As Chief Engineer on board, stress the issues you will address for lack of motivation, differences in attitude and to increase sense of competitiveness for better management and effective control?

7.

Briefly discuss the reasons for Bulk -Carrier losses in the last decade and explain, how provision detailed in Chapter XH of SOLAS 74, as amended, will contribute towards the safety of bulk carriers?

8.

As per the Marine Insurance Act, write short notes on the following: (a) Deviation (b) Warranties (c) War Risk Clause (d) Charterers Contribution Clause

9.

Write short notes on any THREE: (a)Lloyd's Open Form. (b)General Average and Particular Average. (c)Bill of Lading (d)Treaty, Convention and Protocol.

-XXXXX-

EXAMINATION OF MARINE ENGINEER OFFICER Function: Marine Engineering Management Level ENGINEERING MANAGEMENT M.E.O. Class I (Time allowed - 3hours) Morning Paper India (2006-2007) Total Marks 100

NB:

(1) Answer SIX Questions only (2) All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carry weightage (4) All unused pages of Answer script must be cancelled out by two lines (X) across the page.

1.

The protection of the Marine environment is of utmost importance today. Discuss; (a) How would you as a Chief Engineer Officer of a tanker ensure protection of the environment by compliance with the various Regulation of MARPOL 73/78 Annex 1 for prevention and control of pollution at sea? (b) State requirements for compliance under Annex VI of MARPOL 73/78.

2.

With reference to record keeping onboard,-discuss (i) the necessity of proper filing (ii) efficient control of follow up and verification activities. Describe a situation onboard, which will highlight the importance of record keeping of above two cases.

3.

(a) What are P & I clubs? Describe how P & I clubs collect fond from ship-owners. (b) What are the risks that are covered under the term "protection" and "indemnity"?

4.

Highlight the following amendments to IMO Conventions and its effect in ship operation thereof. Mention their date of entry into force. (a) CLC and Fund Conventions (b)SOLAS-IMDG Code

5.

List the objectives of an ISM Internal Audit of a ship? How an Internal Audit helps in External Audit of a vessel? Name the salient issues addressed in the Internal Audit and the persons responsible to carry out the same.

6.

Explain the associated key factors and activities to ensure successful Planned Maintenance programme onboard ships under ISM Code with the following terms: (a) Corrective action process, (b) Developing and improving maintenance procedures, (c) Systematic approach to maintenance, (d)Maintenance intervals, (e) Inspections.

7.

With respect to engine room man management enlist the key issues you will address with proper justification in the following areas; (a)Training programmes, (b)Long term personnel development concept, (c)Attitude and motivation development, (d)Emergency response, (e)Coping with stress.

8.

Explain "Port State Control" (PSC) Inspection. Underline its authority^ and the basis of such inspections. Enumerate the relevant Regulations, Article and Annexes of SOLAS 74, LOAD LINES 66, MARPOL 73/78, STCW 78, and TONNAGE 69, which forms the provisions for PSC.

9.

Differentiate the salient consideration taken during survey of a ship under; (a) Bare boat charter, (b) Voyage charter, (c) Time charter.

As a Chief Engineer on board explain with reasons which of the three survey is most demanding and exhaustive and why? -XXXXX-

EXAMINATION OF MARINE ENGINEER OFFICER Function: Marine Engineering Management Level ENGINEERING MANAGEMENT M.E.O. Class I (Time allowed - 3hours) Morning Paper India (2006-2007) Total Marks 100

NB:

(1) Answer SIX Questions only (2) All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carry weightage (4) All unused pages of Answer script must be cancelled out by two lines (X) across the page. (5) All unused pages of Answer script must be cancelled out by two lines (X) across the page.

1.

You as Chief Engineer are required to inform, your. Company with: respect to inspection of propellers in the dry dock during which you noticed a surface crack on one of the blades. State the steps taken by you as Chief Engineer for successful handling of the situation.

2.

Differentiate between Rules, Regulations, Protocol, Act, Tacit Acceptance and Convention as adapted in IMO. Describe the process by which a Convention gets converted into a Rule administered by a maritime member country.

3.

Has "ISM Code" been successful in bringing changes with respect to safety and environment protection? With your past experience of serving on ships having Safety Management System, eate on the same.

4.

What provisions are made under Port State Control (PSC) towards (i) Certificates issued by non-party States to their ships (ii) Inspection of ships below Convention size and (iii) No more favorable treatment.

5.

Explain the influence of following external factors in higher consumption of fuel oil and how at best they could be controlled? (i) Ship's hull condition (ii) Weather condition (iii) Maintenance of different equipments in a fuel oil system (iv) Damage to propeller blades.

6.

What are the primary strategies for coping with stress affected personnel? How these elements can be best addressed in ships personnel motivating them/for better team work?

7.

(a) What are the important highlights of UNCLOS with respect to environment protection? : (b) Explain: (i) Territorial Sea, (ii) Contiguous Zone, (iii) Exclusive Economic Zone, (iv) Continental Shelf, (v) High Seas.

8.

Eate the influences of a Charterer on operation of propulsion and other shipboard machineries during a voyage. After taking over a ship as a Chief Engineer you have been informed that the ship is on a timecharter: and has a history of unforeseen auxiliary machinery breakdown at sea. State the different options you have and actions you would take as a Chief Engineer prior to the commencement of voyage?

9.

As a Chief Engineer on a UMS vessel scheduled to make a voyage from India to the U.S. Coast; list the, salient items you will inspect including propulsion machinery to ensure making a satisfactory voyage. Also, list the documents the ship will keep ready to successfully undergo port State control inspection on arrival.

-XXXXX-

EXAMINATION OF MARINE ENGINEER OFFICER Function: Marine Engineering Management Level ENGINEERING MANAGEMENT M.E.O. Class I (Time allowed - 3hours) Morning Paper India (2008) Total Marks 100

NB:

(1) Answer SIX Questions only (2) All Questions carry equal marks (3) Neatness in handwriting and clarity in expression carry weightage (4) All unused pages of Answer script must be cancelled out by two lines (X) across the page.

1.

The protection of the Marine environment is of utmost importance today. Discuss; (a) How would you as a Chief Engineer Officer of a tanker ensure protection of the environment by compliance with the various Regulation of MARPOL 73/78 Annex 1 for prevention and control of pollution at sea? (b) State requirements for compliance under Annex VI of MARPOL 73/78.

2.

With reference to record keeping onboard, discuss (i) the necessity of proper filing (ii) efficient control of follow up and verification activities. Describe a situation onboard, which will highlight the importance of record keeping of above two cases.

3.

(a)

What are P & I clubs? Describe how P & I clubs collect fund

from ship owners. (b) What are the risks that are covered under the term “protection” and “indemnity”? 4.

Highlight the following amendments to IMO Conventions and its effect in ship operation thereof. Mention their date of entry into force. (a) CLC and Fund Conventions (b) SOLAS – IMDG Code

5.

List the objectives of an ISM Internal Audit of a ship? How an Internal Audit helps in External Audit of a vessel? Name the salient issues addressed in the Internal Audit and the persons responsible to carry out the same.

6.

Explain the associated key factors and activities to ensure successful planned Maintenance programme onboard ships under ISM Code with (a) Corrective action process, (b) Developing and improving maintenance procedures, (c) Systematic approach to maintenance, (d) Maintenance intervals, (e) Inspections.

7.

With respect to engine room man management enlist the key issue you will address with proper justification in the following areas: (a) Training programmes, (b) Long term personnel development concept, (c) Attitude and motivation development, (d) Emergency response, (e) Coping with stress.

8.

Explain “Port State Control” (PSC) Inspection. Underline its authority, and the basis of such inspections. Enumerate the relevant Regulations, Article and Annexes of Solas 74, LOAD LINES 66, MARPOL 73/78, STCW 78 and TONNAGE 69, which forms the provisions for PSC.

9.

Differentiate the salient consideration taken during survey of a ship under; (a) Bare boat charter,

(b) Voyage charter, (c) Time charter. As a Chief Engineer on board explain with reasons which of the three survey is most demanding and exhaustive and why? -XXXXX-