Material Master Field Selection Configuration

Introduction Below document will explain how you can configure fields in the material master (Transaction MM01/MM02) based on specific requirements. For example if you want to set certain field in a material master to mandatory, option or hidden, then below are the steps you would follow. Eg: Need to set External Material Group field (in Basic data 1 tab in Material Master) Mandatory for FERT Material Type only.

Configuration Steps 

First you have to get the Field Technical Name. a. Click on that field b. Press F1 c. Go to “Technical Information” d. Get the Screen Field Name



Go to SPRO/ Logistics - General/ Material Master/ Assign Fields to Field Selection Groups



Click on Field Name button



Paste that copied Field Technical Name there & press Enter



Highlight the Line & press

option



Select the Material Type “FERT” Using Position option from the below grid.



Tick on "Reqd Entry" combo box.



Save

Remarks: Please note that “FIELD REF:” can be reference to many types. You can see those referred types by clicking on

. So that all change will be applicable for all those as well.

Eg: You might get below screen.

If you do a change now for FERT, same will applicable to FERT, PLN, PROD, SCND, etc as well. You can see this reference Material Type from “Material Type” as well. IMG Path:

Note: Sometimes SAP has put 2 or more field in one Field Selection Group. In that case; you can keep the field that you want & remove other fields from that Group. Then you can do the same change to that group.

Author: Anupa Wijesinghe E-Mail: [email protected] / [email protected] Website: www.learnsaptips.com View my profile in LinkedIn Follow me on Twitter

Disclaimer This article is done based on my research and readings, unless otherwise stated. The views expressed are my own and not of anyone else. Author accepts no liability for the content of the articles in this website or for the consequences of any actions taken on the basis of the information provided. Using this information is at the users own discretion and responsibility.