Manual ProSteel
Short Description
uputstvo za pro steel...
Description
Manual ProSteel V8i Professional November 2008
Bentley Systems
Page I
No part of this manual may be reproduced or copied and distributed by any form of electronic means (copy, microfilm, etc.) without written permission of Bentley Systems. Bentley Systems does not guarantee, either explicitly or implicitly, the suitability for sale or the capability for particular applications of these materials which are supplied only in the existing form. Bentley Systems does not assume any liability for collateral, accidental or indirect damages arising from the purchase and the application of these materials. Where a liability is assumed by Bentley Systems, such liability is limited to the purchase price of the materials described herein. Bentley Systems reserves the right to revise or to modify this product at their own discretion. This user‟s guide describes the product at the time of publication. This description may not be applicable to future versions of this product. Please note: all indicated trade names are registered trade marks of the companies concerned. Content (responsible persons) Illustrations and Layout
J. Friedrich / C.Trinkner / G.Griesing C. Trinkner
© 2008 Bentley Systems www.bentley.com
Page II
Table of Contents
Table of Contents
A
INTRODUCTION
A.1
Introduction
A.1.1 A.1.2
General information System Requirements
1 1 1 3
A.2
Language Selection
1
A.3
Dialog Framework
1
A.3.1 A.3.2 A.3.3 A.3.4 A.3.5
A.4
Input Options
A.4.1 A.4.2 A.4.3
A.5
Input Options in Input Fields Input Options at Object Selection Special Key-Commands
Project Manager
A.5.1
A.1
B
ProSteel Dialog boxes Template Manager RollOver-Mechanism Pick Frame and Auxiliary Graphics Input Extensions
Working with Projects
Global Settings
MODELLING AND PART LISTS
1 4 9 10 11
1 1 2 3
1 2
1
1
B.1
Layer Functions
1
B.2
Construction Utilities
1
B.2.1 B.2.2
B.3 B.3.1 B.3.2 B.3.3 B.3.4 B.3.5
Construction lines Measure of distances
3D Object Views Object View / Object-UCS Surface View / Surface-UCS Global View Top View Free View
1 6
1 1 3 4 5 6
Page III
Table of Contents B.3.6 B.3.7
B.4 B.4.1 B.4.2 B.4.3 B.4.4 B.4.5 B.4.6 B.4.7
B.5 B.5.1 B.5.2 B.5.3 B.5.4 B.5.5 B.5.6 B.5.7
B.6 B.6.1 B.6.2 B.6.3 B.6.4 B.6.5 B.6.6 B.6.7 B.6.8 B.6.9
Cutting Plane Perspective View
Move and Copy Parts Move/Copy Turn Mirror Align Clone Rotate Settings
Display / Assign parts Hide Regenerate Display Classes Area Classes Part Families Process Status Search Parts
Work Frames Rectangular Work Frame Cylindrical Work Frame Wedge-Shaped Work Frame Pyramidal Work Frame Create Views Axes Names Additional Axes (Border Lines) Options User-defined Blocks
7 9
1 2 3 4 5 7 9 10
1 1 3 4 6 7 11 13
1 2 6 7 8 9 11 14 15 17
B.7
Choose View
1
B.8
Insert Shapes
1
B.8.1 B.8.2 B.8.3 B.8.4 B.8.5 B.8.6 B.8.7
B.9 B.9.1 B.9.2 Page IV
Straight Shapes Bent Shapes Additional Settings Shape Series Shape Segment Girder Position Automatic Insertion
Insert Plates Flat Straight Plates Flat Bent Plates
2 8 9 11 13 15 17
1 1 6
Table of Contents B.9.3 B.9.4 B.9.5
Gratings Bent Plates Additional Settings
7 8 13
B.10
Insert Solids
1
B.11
3D-Modifications
1
B.11.1 B.11.2 B.11.3 B.11.4 B.11.5 B.11.6 B.11.7
B.12
Plate Editor
B.12.1 B.12.2 B.12.3
B.13
Boolean Operations Chamfer / Rounding Off Edge Processing
Drilling / Bolted Connections
B.13.1 B.13.2 B.13.3 B.13.4
B.14
Divide / Combine Modify Shapes Modify Plates Wall Processing Additional Settings Notch betwen two Shapes Boolean Operations
Drill Holes / Drill Hole Fields Bolted Connections Additional Settings Edge Distances
Bolts
B.14.1 B.14.2 B.14.3
Bolting parts Bolt Style Management Sort
2 12 15 17 19 21 29
1 2 4 6
1 2 6 8 10
1 2 4 13
B.15
Insert Stiffeners
1
B.16
Plate Connections
1
B.16.1 B.16.2 B.16.3
Free Plate Connections Connections Resistant to Deflection / Shear Forces User-Defined Connections
2 15 18
B.17
Base Plates According to DSTV
1
B.18
Web Angle
1
B.19
Shear Plates
1
Page V
Table of Contents
B.20
Splice Joints
1
B.21
Purlin Connection
1
B.22
Gusset Plates
1
B.23
Dynamic Bracing
1
B.23.1 B.23.2 B.23.3 B.23.4
B.24
Common Settings Shape Bracing Rod Bracing Pipe Bracing
Static Bracing
B.24.1 B.24.2
Settings Creation of Bracing Parts
2 6 9 12
1 2 6
B.25
Haunches
1
B.26
Connection Editor
1
B.27
Group Structure
1
B.27.1 B.27.2 B.27.3 B.27.4
B.28
General Information about Groups Creation and Processing of Groups Check Groups Settings
Positioning
B.28.1 B.28.2 B.28.3 B.28.4 B.28.5 B.28.6 B.28.7
Automatic Positioning Manual Insertion Automatic Insertion (Distribution) Other Auxiliary Commands Add Drawing Number Depiction of Position Flags Management of Styles
1 3 7 11
1 2 14 18 25 27 28 32
B.29
Drawing Information
1
B.30
Create Parts Lists
1
B.30.1 B.30.2
B.31
Drawing Parts List
B.31.1 B.31.2
Page VI
Register Parts Lists Process Parts List
Parts List Creation Processing of Parts List Styles
2 5
1 1 4
Table of Contents B.31.3 B.31.4
B.32
Containment List
B.32.1 B.32.2 B.32.3
C
Management of Parts List Styles Processing the Content of Parts List
Creation of Containment List Processing of List Styles Processing the Content of Drawing Containment List
DETAILING
C.1
DetailCenter
C.1.1 C.1.2 C.1.3 C.1.4 C.1.5 C.1.6 C.1.7 C.1.8 C.1.9 C.1.10 C.1.11 C.1.12 C.1.13 C.1.14 C.1.15 C.1.16 C.1.17
C.2 C.2.1 C.2.2 C.2.3 C.2.4 C.2.4 C.2.5 C.2.6 C.2.7
C.3 C.3.1 C.3.2 C.3.3
C.4
The 2D-Detailing Detailing with the DetailCenter General Information – Scale and Dimension Styles General Information - Detail Types General Information – Group Structure Intelligent 2D-Details Display of Construction Component Lists Component Overview Views Overview Detail Block Overview (Insert) Global Settings Automatic Translation Transfer Drawing Paths Drawing Verification Direct Detailing Modification Management Replace Detail Blocks
Detailing Style Working with Detailing Styles General Info Global Settings 2D-Display 2D-Display Dimensioning Label Settings Settings for „ProConcrete 3D‟ Parts
DetailCenter Express Running DetailCenter Express Selection Pages Single Sheet Output
InsertExpress
10 11
1 1 3 9
1 1 1 3 9 11 16 20 22 30 43 52 58 64 67 69 74 76 86
1 1 2 4 12 12 33 129 137
1 2 3 23
1 Page VII
Table of Contents C.4.1 C.4.2 C.4.3 C.4.4
Start InsertExpress Manual Insertion Mode Batch Insertion Mode Format File
2 4 16 18
C.5
Cranked 2D-View
1
C.6
North Symbol
1
C.7
Manual Dimensioning Points
1
C.8
Manual Object Link
1
C.9
Global Scale
1
C.10
Drawing Border
1
C.11
Manual 2D-Cut
1
C.12
Manual Dimensioning
1
C.13
Elevation Flags
1
C.14
Weld Symbols
1
C.15
Short 2D manually
1
C.16
2D-Cutout
1
C.17
Hole Display
1
C.18
Automatic 2D-Cut
1
C.19
Flatten Viewport
1
MISCELLANOUS
1
D D.1
User-Defined Component Parts
D.1.1 D.1.2 D.1.3
Page VIII
Special Parts Weld Shapes Parametric Shapes
1 1 11 15
Table of Contents
D.2
BlockCenter
D.2.1 D.2.2 D.2.3 D.2.4 D.2.5
Structure of the BlockCenter Creation and Edition of Blocks Insert Blocks Display of Block Structure Database of Block Data
1 2 4 6 8 11
D.3
Roof/Wall Panels
1
D.4
Dispatch Bolts / Blocks
1
Insertion of Thread Bolts Insertion of Blocks
2 5
D.4.1 D.4.2
D.5
Auxiliary Tools
D.5.1 D.5.2 D.5.3 D.5.4 D.5.5 D.5.6 D.5.7
Collision Check Center of Gravity Tube Unfold Move Objects Create ACIS-DWG Create AutoCAD Drawing Convert ADT shapes
1 1 4 5 7 8 10 11
D.6
Add Effective Static Analysis Lines
1
D.7
Data Exchange
5
D.7.1 General Information about Data Exchange D.7.2 Exchange Lists D.7.3 Interface Format Selection D.7.4 Data Import Command D.7.5 Data Export Command D.7.6 Direct Data Exchange with RSTAB D.7.7 New Interfaces PSB-Interface (ProSteel Object-Exchange Data) D.7.8 Previous Interfaces
E
APPENDIX
5 7 13 15 20 24 25 32 43
1
E.1
Structural Element Staircase
1
E.2
Structural Element Handrail
1
E.3
Structural Element Hangar Frame
1
Page IX
Table of Contents
E.4
Structural Element Truss Girder
1
E.5
Structural Element Purlin Course
1
E.6
Structural Element Ladder
1
E.7
Structural Element Joist
1
E.8
ProSteel Properties Dialogs
1
E.8.1 E.8.2 E.8.3 E.8.4 E.8.5 E.8.6 E.8.7 E.8.8 E.8.9 E.8.10 E.8.11 E.8.12 E.8.13 E.8.14 E.8.15 E.8.16 E.8.17
Shapes Plates Bolts Volume Solids / Basic Primitives Special Parts Assemblies Work Frames / Views Structural Elements Roof/Wall-Objects Position Flags, Elevations, Weld Marks,.. Drawing Parts Lists 3D Modifications Flat Cuts Poly-Cuts Edge Processing Notches (Outlets) Common Properties
2 15 20 25 27 28 30 30 30 30 30 31 34 35 36 37 38
E.9
ProSteel Command Reference
1
E.10
Own Notes
7
Page X
Introduction
A Introduction
Page A - 1
Introduction
Page A - 2
Introduction
A.1
Introduction
A.1.1 General information
Welcome to ProSteel You decided to buy our ProSteel program because you are convinced that you will cope with your daily tasks faster and in a more reliable way in the future by using a CAD software package which is successful, well tried and tested all over the world. We are pleased that you selected a product of our company and we hope that for a long time we will be your reliable partners.
Contents of this Manual This manual provides a complete description of all commands available with the ProSteel steel construction software package. Some of the individual descriptions contain examples, which facilitate the recreation of the different command applications by providing graphics and screenshots.
Not Provided in this Manual Working with ProSteel and this manual requires that you are already familiar with the use of AutoCAD. The chapters of this manual require knowledge of AutoCAD and Windows. If that is not the case, you should familiarize yourself with the most important basic AutoCAD commands to be able to work effectively with the new software. Although the program will help you to overcome many of the three-dimensional AutoCAD construction hurdles, you should be familiar with terms such as object snap, user coordinate system (UCS), blocks, etc.
Page A.1 - 1
Introduction
Differences to your Current Version Our new CAD Abstract Layer (CAL) technology permits largely uniform functionality and appearance of ProSteel on different CAD-platforms. In addition, ProSteel is available in several licence models, which differ from each other with regard to their performance range. Due to the fact that the integration into the CAD system AutoCAD from AutoDesk is the most extensive implementation at the moment, the description of all functions of this manual refers to the version ProSteel Professional for AutoCAD. When you bought ProSteel for another platform other than AutoCAD or another licence model (e.g. without detailing), the actual performance range of your version may differ from this manual. In addition, there may be differences due to intermediate updates of the program after publication of this manual.
Page A.1 - 2
Introduction
A.1.2 System Requirements The system requirements are based on an installation running under AutoCAD. For other platforms these requirements can be different and they are depended on the selected CAD system. In principle, ProSteel can run on every PC, where the CAD-program AutoCAD 2004 is running as well. Therefore the system requirements of AutoCAD 20042006 or AutoCAD 2007 and AutoCAD 2008 are valid. Hardware-Performance (Minimum Requirement) Processor Working Memory Fixed Disk Storage
Pentium 4 with 3 GHz 1024 MB 500 MB
Hardware-Performance (Recommended) Processor Working Memory Fixed Disk Storage
Pentium Core 2 Duo with 2,4 GHz 2048 MB 2,0 GB
The requirements for the graphic card correspond to the recommendations of Messrs. AutoDesk for 3D-mode. In addition, a CD-ROM-drive for the installation is required and – depending on the software protection – a floppy disk drive, USB-port or parallel port. Operating System and Additionally Installed Software Microsoft Windows 2000/XP Professional AutoCAD 2004...2008 or the corresponding Mechanical- or ADT product Adobe Reader 6.0 or higher
Page A.1 - 3
Introduction
Page A.1 - 4
Language Selection
A.2
Language Selection
In ProSteel you can select the language of the menu prompt and thus of the configuration, too while the program is running.
The displayed dialog offers all languages which are installed at the very moment. To switch over to another language check the field beside the flag and confirm the modification with the OK-button. Apart from the language of the menu prompt, the modified settings for the configuration will be loaded as well when the program is started for the next time. If you switch over e. g. from German to English, nothing will happen first in the running mode except the language of the dialogs. However, if you start ProSteel anew together with the modified language setting, the configuration of the language setting will be loaded as well from the currently installed language set. This means that a plate will not be created with the name Blech but with the name Plate. The search paths of the program for blocks, temp- and varia-directories will change as well and another ProSteel configuration will be available. Please refer to the chapter Installation to see which installations depend on the language.
Page A.2 - 1
Language Selection
Page A.2 - 2
Dialog Framework
A.3
Dialog Framework
A.3.1 ProSteel Dialog boxes In ProSteel you will mainly meet dialog frames based on a standardized appearance. The advantage is that you will always find certain repetitions of the different commands at the same place and with the same icon.
Dialog Frame Structure Each dialog consists of the basic control buttons such as OK, CANCEL, TEMPLATE, etc., which are placed at the bottom edge of the dialog. On the right, you will find auxiliary diagrams, preview windows or a pick frame also called “monitor” in the descriptions, appearing in some of the commands. The actual content of the dialog differs from one command to the other; additional buttons may appear in the lower button bar depending on the corresponding command. The following picture shows a typical dialog frame, containing all standard elements, for the example of an end plate connection:
The standard elements (lower button bar) as well as the general behaviour of the dialogs are described below. When the different commands are described, these things won‟t be explained any more.
Page A.3 - 1
Dialog Framework
Dialog-Commands OK By clicking on this button, you close the dialog and the last settings such as content of the dialog, position on the screen, selected dialog tab, etc. are stored. Depending on the command, you are prompted to continue with other things like e.g. selection of component parts, etc. CANCEL By clicking on this button, you close the dialog and the command is cancelled. If possible, the previous status is restored as it was before selection of the command
HELP When you click on this button, the Online-help is opened.
TEMPLATE By clicking on this button, you can save or load again the complete settings of the dialog for the selected command under any template name you like. Here, another dialog of ProSteel template management opens which is described separately in this subordinate chapter. CLONE By clicking on this button, you can read the settings of an existing connection and import it onto another one. This function is especially suitable for automatic connections. It helps you to obtain an identical connection to an existing one, the exact default settings of which, however, you don‟t know any more. For more detailed information, please refer to the descriptions of the individual functions.
Page A.3 - 2
Dialog Framework
UPDATE When you click on this button, the connection, structure or the component part are updated according to your default settings. Normally in ProSteel, you are working in a dynamic mode. Each modification of a parameter is directly translated into a modification of the corresponding object so that you can see the results immediately. In case of very complex structures or less powerful computers, it may be reasonable to deactivate this automatic update in the global settings of ProSteel and to activate it manually if need be.
ROLL-OVER By clicking on this button, you alternatively switch on or off the so-called Roll-Over-mechanism. When RollOver is switched on, the visible dialog area depends on the current mouse position. For more detailed information, please refer to the separate description in this chapter.
GRAPHIC When you click on this button, the auxiliary graphics of the corresponding dialogs are alternatively switched on or off. This influences the size of the dialog on the screen.
Page A.3 - 3
Dialog Framework
A.3.2 Template Manager When working with the program, you will see that it provides a variety of different dialog boxes, which are used to enter settings for the functions and commands. Many of these settings are repeated for construction tasks in different orders or are used in a slightly modified for (e.g. connection plates with holes for specific supports) – it would be useful to save these settings for later use. For this purpose, ProSteel offers you a template management function. Many of the dialogs feature a TEMPLATE button. Clicking this button calls up the template management dialog box where you then can save or load the settings. Sometimes, the templates can also be accessed via the context menu of the right mouse key. Although this is always the same window, the saved entries depend on the type of dialog box from which you are using the template management dialog. The only items visible in the command ‟Work Frame‟ are saved work frames. The command „Plates‟ correspondingly offers only connection plate specifications.
The methods of working within the template management are very similar to those of Windows Explorer. For example, you can organize the templates‟ structure in different list branches and easily modify this structure at any time via Drag&Drop.
Page A.3 - 4
Dialog Framework
Dialog-Commands LOAD When you click on this button, the template marked in the selection list is loaded and the input fields of the dialog box are filled in accordingly. Then, the dialog will be closed immediately. You can also double-click the list entry for this command. SAVE By clicking on this button, you can save the settings entered in the dialog frame using a name indicated by you. You first have to select the desired list branch where your template has to be saved and then click the SAVE button. Now an entry with a standard name will be created the name of which can be modified immediately or at a later moment. To overwrite an existing entry, select the corresponding entry instead of a list branch. NEW FOLDER By clicking on this button, you can create a new branch (folder) on the topmost level or even within a list branch to save your templates. You first have to select the desired list branch and then click the NEW FOLDER button. IMPORT Click on this button to add other templates of the same type to your current template file. This may be a single template, a list branch or the complete file. A file selection dialog opens where you can select the template file to be imported. It is checked whether you selected the same type. If the name of some list branches of the imported template file is identical with the entry in the existing file, you can decide for each branch individually whether the existing data have to be overwritten or not. The new branches or templates are only added; they may be re-organized later by using Drag&Drop.
Page A.3 - 5
Dialog Framework
Order Click on this button, and the alphabetical order of the display list is turned upside down. You can reach entries which are placed further down without having to scroll up and down the list. First, you have to select a list branch the order of which has to be changed. Sorting can be defined for each branch individually.
Context Menu Most of the dialog commands can be reached via the context menu of the right mouse key. Further commands are available here. REMOVE Select this command to delete the selected template or a complete branch including all subordinate branches. EXPORT Select this command to save the selected template or a complete branch including all subordinate branches under any file name you like. The data can be added again at any time using the IMPORT command or they can be made accessible to other users for import. After selection of the command, the file selection dialog opens where you can select a file name or a file path. FAVOURITES Select this command to add the selected template to the favourites‟ list or to remove it from this list. BLOCK Select this command to block the selected template against overwriting. This function is only available in expert mode. UNBLOCK Select this command to unblock templates which were blocked against overwriting. This function is only available in expert mode.
Page A.3 - 6
Dialog Framework
Permanent and Temporary Dialog Templates The templates are saved as permanent dialog settings in the variants folder of the program and thus are available for all users at the same time in a network if the same folder has been set at this workstation. In addition, the last settings are saved in an individual temporary folder of the workstation each time the dialog is left. Thus you have fast access to the last entry when selecting the function repeatedly.
Page A.3 - 7
Dialog Framework
Version Control You are perhaps used to the fact that in other programs and in previous ProSteel versions already defined templates were often lost during an update. This is the reason why the data structure of template file was equipped with a version and type control. Your new defined templates remain compatible with the following versions and when former files are loaded, any new added values will have a standard value.
dBASE-Import and -Export Different functions additionally offer the possibility to export the template files into the dBASE-format or to import them from this format. You can create data records using Excel or comparable programs. These data records then are available as ProSteel-templates. Especially the creation of template records similar in quality (e.g. only with two variable dimensions) is considerably facilitated. Select EXPORT and IMPORT as file type dBASE III List in the dialog commands to export individual templates or branches into the dBASE-format or to import them from there. If the selection is not possible, format conversion is not available for these dialog templates.
Favourites You can collect selected templates individually in a favourites‟ list. These lists are displayed in the dialogs of the functions to have a quick selection of templates available. First click on the corresponding entry to define a template as favourite. Then, select the option Add to favourites in the context menu. Now, the entry is displayed in bold type. To remove an entry, click on the entry again and select the entry Remove from Favourites in the context menu.
Page A.3 - 8
Dialog Framework
A.3.3 RollOver-Mechanism The so-called RollOver-mechanism allows for a better use of your drawing surface in ProSteel because the dialogs are only displayed completely if you probably intend to enter something or to control the settings. Otherwise, the dialogs are reduced to the title bar allowing you at any time to recognize which dialogs are open at the moment. The change from complete to reduced status depends on the movements of your mouse. When you leave the input area of a dialog with the mouse, it will be “folded up” except for the title bar shortly afterwards and you can look at your construction. It is not until you move to the title bar again with the mouse, that the dialog is displayed completely because the program now assumes that you are going to modify something.
Individual Control Due to the fact that perhaps you don‟t want to have a RollOver-mechanism activated for each dialog, it can be switched on or off for each dialog individually. You may even completely deactivate the RollOver-mechanism in the global settings if you don‟t like this way of working at all. However, your individual defaults are kept in each dialog frame and become valid again when the mechanism is activated.
Page A.3 - 9
Dialog Framework
A.3.4 Pick Frame and Auxiliary Graphics Many dialogs have a graphic depiction on the right. This is either a pure auxiliary graphic explaining the dialog parameters or – depending on the command – a pick frame for the determination of reference points (“monitor“).
Auxiliary Graphics The auxiliary graphics show a depiction in the form of a diagram, e.g. a connection or a structural element with the most important dimensions, which can be modified in the dialog frame. Here, different numbers which you will find again in the labelling of input fields and which allow for a clear assignment marks the dimensions. In some dialog frames, the graphics change depending on the selection of an option or even of an input field. Thus they are sufficient in most cases as help for the parameters.
Monitor The monitor frame helps you to define the reference points e.g. at the insertion of shapes. In this case, you usually find small circles serving as marks to be clicked. The activated reference point then is displayed in red. In addition, the monitor also shows a preview of your current default settings e.g. at the definition of position flags. In contrast to the auxiliary graphics, its proportions change.
Page A.3 - 10
Dialog Framework
A.3.5 Input Extensions Apart from the ToolTips customary in Windows-programs, displaying an auxiliary text with explanations, when you move your mouse to an input field or button, further useful helps are available for you in the dialog frames.
Pick Lengths Most input fields for entering distances allow picking the distance in your drawing. Then, the picked length is entered into the input field. This extension permits comfortable seizing of distances from your construction. To do so, select the entry Add Picked Length in the corresponding field via the context menu; the dialog frame is temporarily hidden, and you can pick the distance via two points. If you select the entry Add Picked Length (without Z) instead, the distance will be calculated without Z-coordinates.
Pocket Calculator Most input fields for entering distances alternatively allow the use of an integrated pocket calculator to calculate the values. The new calculated value then is entered into the input field. To do so, select the entry Add Calculated Value via the context menu; the pocket calculator is displayed. If a value was entered into the input field before, it will be automatically displayed in the pocket calculator.
Page A.3 - 11
Dialog Framework
Page A.3 - 12
Input Options
A.4
Input Options
A.4.1 Input Options in Input Fields Some additional functions are available in all fields where you can enter a length, distance or coordinate. These commands, however, are not available for fields where you enter texts, angles, or general digits such as factors or scaling values. You have access to these functions by calling the context menu with the right mouse key in the corresponding input field and then select the desired entry The well-known Windows functions for input fields such as e.g. Copy and Paste will of course be at your disposal there in future, too.
Additional Functions Pick Length
If you select this function, the dialog is hidden and you can pick two points in the drawing. The distance from one point to the other is calculated and the result is entered into the corresponding dialog field. Then, the dialog is displayed again.
Pick Length without Z If you select this option, the z-coordinates are removed at distance calculation. Running is the same as described above. Pocket Calculator A small pocket calculator is displayed when you use this option. When selected, the calculator takes over the content of the current field and you can directly calculate with this value. When the calculation is finished and you want to copy the result into the current input field, just quit the calculator using the COPY button.
Page A.4 - 1
Input Options
A.4.2 Input Options at Object Selection When the program prompts an object selection, you can select the desired component parts via window or via selection. In this case there are two functions, which can be rather useful. Comparison
In most of the functions, and in the case you want to select all parts, you can answer the selection with RETURN. Then, all parts of the current drawing will be selected.
Filter
When you interrupt the selection with ESC and SHIFT, the filter function is selected and the function is not left.
In this case you would filter your input for all parts being longer than 2000 mm. If you press the OK-button, the parts are selected on which the filtering is based. Then, the original function is carried out together with the filter result. For a detailed description of the filter possibilities, please refer to the description of PS_SEARCH command.
Page A.4 - 2
Input Options
A.4.3 Special Key-Commands In some other cases, you can select another function by simultaneously pressing ALT, CTRL or SHIFT-key. The available options are displayed in the following list. Use of CTRL-Key Bolted Joint
The bolted joint command saves the last created bolt to avoid searching through the database if the next bolt is a bolt of the same type and length, etc. When you keep the CTRL-key pressed during bolted joint command, the stored data are deleted and the program is forced to read the bolt data from a file.
Select View
At Select View command you can set whether double-clicking quits the dialog. This setting is turned upside down when the CTRL-key is pressed simultaneously.
Display Class
You can move the dialog of display and area classes lengthways. To return to the original status, keep the CTRLkey pressed while the corresponding dialog is opened.
NC-Data
The CTRL-key pressed while component parts for NC-creation are selected switches on the Debug-mode. Diverse graphical outputs are generated for NC-creation. They are rather meant for development, but sometimes they help to solve problems as well.
Positioning
If you enter the starting value of positioning, the next following value will be calculated. If you have alphanumerical values, which start with A, this is not possible, because you have to enter a 0 and the result will be an displayed. A pressed CTRL-key creates an .
Work Frame
If you want to delete the list values of a dimension, you have to put the focus on it and keep the CTRL-key pressed. Using the ALT-key allows elegantly editing of the field.
Positioning
At automatic positioning the subsequent calculation of component parts can be switched off using the CTRL-key.
Modify Properties Keep the STRG-key pressed to modify the properties of exactly one component part.
Page A.4 - 3
Input Options
Use of ALT-Key General
The pressed ALT-key avoids working off the link update. No updates due to modifications are carried out. You can e.g. use this function to move parts without causing a reaction of the connected parts.
Render Export
After the parts for Render-Export have been selected, a standard file name is used. The ALT-key permits file name selection.
Object View
The object view first creates a non-aligned view on the part. Alignment is made via RETURN-button. If you press the ALTkey at selection of view direction, an aligned view will be directly created.
Free View
This is not carried out using Clipping. If the ALT-key is pressed, the global clipping distances will be used.
Osnap
A pressed ALT-key during Object Snap selection inserts the reference points as well, if existing.
Handrail
At shape selection, the selection of the previous type can be taken over if you keep the ALT-key pressed while selecting the shape class (post, hand rail, knee-high guard rail, etc.). The same function is valid at modification of shape status, i.e. whether the corresponding shape is used or not.
Edit Drill Holes
At modification of drill holes, you can cancel the blocking of bolt fields by means of the ALT-key. These then can be deleted as well. Use this option carefully!
Truss Girders
Same function as for the selection of handrail shapes.
Lattice Girders
Same function as for the selection of handrail shapes. At insertion, the lattice girder is created with the entered width. The Alt-key creates a frame with the width of the entered points.
Select View
At Select View command, double-clicking on it activates the selected view. The ALT-key only moves to the corresponding UCS.
Hangar Frame
At insertion, the frame is created with the entered width. The ALT-key creates a frame with the width of the entered points.
Page A.4 - 4
Input Options
Haunch
If you press the ALT-key while seizing the connection shape, a ceiling joist is carried out. If you press the ALT-key while seizing the supporting shape, the plate thicknesses are adapted to the supporting shape.
Ladder
The ALT-key causes that the ladder length is calculated from the third point.
Insert Shapes
If you choose Select Position, a pick into the drawing causes a rotation by 90°. The ALT-key causes a rotation by -90°.
Stiffeners
If you keep the ALT-key pressed during selection, the program is forced to an input via angles.
Copy
At selection via menu points instead of via dialog, the ALT-key causes a conversion of the setting, whether the operation is valid for group or not.
Working Areas
Activating one of the three list fields for distances permits comfortable input of the distances. If the CTRL-key is pressed, the existing distances are deleted.
Line Cut
Pressing the ALT-key at selection causes not only a cut but, if need be, an adaptation, too.
Connect
Pressing the ALT-key at selection of the second shape avoids type check and everything is connected.
ArcShape
Osnap and Center: The ALT-key causes that the endpoints can be seized as well.
Bolt Grips
If a bolt is modified using its grips, the ALT-key causes that the endpoints can be moved freely in space, otherwise only in bolt direction.
Purlin Connect.
If the frame is modified, moving of the grips along a line causes the movement of the line without modifying the size. If the ALT-key is pressed, the line is moved and the size is modified depending on the neighbouring lines.
Plate Grips
Same effects as purlin connection object.
Shape
Osnap and Center. The ALT-key causes that the endpoints can be seized as well.
2D Details
In groups, the movement of an accessory part doesn‟t cause new drawing of the main part. The modification will only be visible after regeneration. Pressing the ALT-key forces restructuring of the group even without regeneration.
Page A.4 - 5
Input Options
Grips
Page A.4 - 6
For shapes, you can specify whether the length modification has only to be effected in shape direction or freely. Using the ALT-key turns this setting upside down.
Global Settings
A.5
Project Manager
In all ProSteel versions it is possible to store drawing files, parts list files or similar things on the folder you like. This feature is often very useful; on the other hand, however, the problem is to keep all files of a project together. Up to now, it was not possible to store the pre-settings, templates or even configurations related to the project. In the current version, a project manager has been implemented offering exactly these options.
File Management Related to the Project You can choose for your temporary, template, style and format files whether these have to be managed related to the project or related to the workstation. Related to the workstation means that you only have a data record of the settings. In contrast, related to the project means that your settings may differ for each project and will be stored within the project. If you work e.g. with detailing styles and formats related to the customer, but use always the same settings and templates, you set the temporary and template files to „not related to the project‟, the style and format files, however, are related to the project.
Page A.1
Input Options
A.5.1 Working with Projects In the upper line, you see the set project path where the projects are filed and from which the stored projects are displayed. In the list, all available projects are displayed, the lines on the right show the information stored for the corresponding project.
Use this button to load the currently highlighted project and to carry out all desired modifications of the configuration. The available possibilities are displayed under Create Project. Alternatively, you can activate a project by double-clicking on it. Load Project...
If this option is activated, the current project is automatically activated when you start ProSteel. The prerequisite is, however, that ProSteel has been quit as usual. Click on this button to finish the current project and to return to the basic configuration. This option permits to create a new project. The available possibilities are displayed below.
Page A.4 - 2
Global Settings
Use this option to delete the currently highlighted project as well as all included files. Also, you have the possibility to close this function, and then the files will be deleted. The current project cannot be deleted. This option allows the modification of project data and settings. Please refer to Create New Project. This option permits the creation of a DwgInfo-table (drawing information) throughout the project. In each project drawing, these files can be taken over later into the corresponding DwgInfo-table. The change of the AutoCAD main dialog informs you whether a project has been loaded. Name and file path of the loaded project are displayed there, instead of the information that you are working with a certain AutoCAD version. Open this dialog to see the name of the current project displayed in the bottom line as well.
Page A.1
Input Options Create New Projects The following dialog appears when you want to create a new project. Use this dialog to enter the project data.
Project Name
Enter the desired name of your project. The remaining paths are modified as well according to your inputs. However, they can be overwritten individually.
Model Files
Enter the path to be used for storing your model files. In contrast to the other paths, it is not possible to force AutoCAD to use this path as previously set. Therefore at storing, you have to take care manually that this path will be used to store your model files there. This button allows interactive path selection if you don‟t want to use the proposed path. This button deletes your individual input and activates the previously set path again.
Page A.4 - 4
Global Settings Detail Files This is the path for your detail drawings. The Detail Centre takes over the selection made here as pre-setting. Parts Lists..
This is the path for your parts list files. The file for the creation of parts lists takes over the selection made here as presetting. Of course, only the new selection is concerned. If another project was activated at the last selection of the parts list creation, the path still is the one set for this project.
NC Files
This is the path for your NC files. The NC-creation takes over the selection made here as pre-setting. Of course, only the new selection is concerned. If another project was activated at the last selection of the NC-creation, the path still is the one set for this project.
PPS Files
This is the path for your PPS files. The PPS-function takes over the selection made here as pre-setting. Of course, only the new selection is concerned. If another project was activated at the last selection of the PPS-function, the path still is the one set for this project.
Export Files
This is the path for your export files. The export function takes over the selection made here as pre-setting. Of course, only the new selection is concerned. If another project was activated at the last selection of the NC-creation, the path still is the one set for this project.
Temp Project
If this option is activated, you can store the temporary files separated from the standard storing place and organize your settings related to the project. In the temporary files e.g. the last active dialog content, the dialog position, etc. are stored.
Temp Files
Enter the path for your temporary files.
Copy from
Enter the path from which all existing temporary files have to be copied into the new directory. You don‟t have to work with a bare installation, but you will find the usual environment, even if from now on it will only be valid for this project.
Templates Proj... If this option is activated, you can store the template files separated from the standard storing place and organize your settings related to the project. In the template files, all data are stored which have been created via the template management. Template Files
Enter the path for your template files.
Copy from
Enter the path from which all existing template files have to be copied into the new directory. You don‟t have to work with a bare installation, but you will find the usual environment, even if from now on it will only be valid for this project.
Page A.1
Input Options
Styles Project
If this option is activated, you can store the style files separated from the standard storing place and organize your settings related to the project. This option is valid for all 5 types of style files (detailing style, position flags, weld marks, elevations, bolts).
Style File
Enter the path for your style files. This path is used to file the corresponding subdirectories for the 5 types of style files.
Copy From
Enter the path from which all existing style files have to be copied into the new directory. You don‟t have to work with a bare installation, but you will find the usual environment, even if from now on it will only be valid for this project.
DWG Project
If this option is activated, you can store the Dwg format templates separated from the standard storing place and organize your settings related to the project.
DWG Frame
Enter the path for your frame files.
Copy From
Enter the path from which all existing Dwg frames have to be copied into the new directory.
Project Descr.
Here you have the opportunity to describe your project in 10 lines. The data are displayed at project selection and have to facilitate selection.
Page A.4 - 6
Global Settings
A.1
Global Settings
This dialog box and its pages allow you to enter the standard settings for several functions. You access the dialog by selecting the „ProSteel/Options item via the context menu of the right mouse button when no objects are selected. Identical values for the corresponding ProSteel-components resulting from these settings can be modified at any time for each part via the “Change PS Properties” command. Most entries are explained with the individual functions; therefore just some settings will be explained in the following. Options
General settings
Grips
Settings for grips and stretching; when no grip is entered for an object, the AutoCAD-command “Stretch” cannot be used.
Shapes
Settings for shapes
Straight Plates
Settings for any kind of plate (poly-plates)
Bolts
Settings for bolt display
Work Frame
Settings for work frame
Assembly
Settings for assemblies
Values
Settings for resolution of circular volumes for volume patterns (Facet-Modeler)
LogLinks
Settings for links between elements
Revision
Settings for modification control
Display
Settings for display
Colours
Settings for the element and other highlighting colours
Monitor
Settings for the display monitor in the dialogs
Configuration
Settings for iso-views, layers, flat steel tables
Dialogs
Settings for all dialogs are specified.
Files
Access to the most important system files; this is only visible in expert mode (see Dialog settings).
Page A.1 - 1
Global Settings
Options
Analysis View
For shape properties, an additional tab for the static view is available. If this option is not required, you can deactivate it here generally.
Double Click
The part properties can be processed by double clicking the part.
Unit Dialog
You are asked at the beginning of a new drawing in which unit system you want to work (metrical or British). Otherwise, the current AutoCAD-setting will be adopted. As the consequent use of the same unit system within a drawing is indispensable for the correct display of shapes, the modification of the system variable MEASUREMENT that is responsible for this can cause unwanted results. This option grants that the once selected unit system is kept and a corresponding hint will be displayed in case of (mostly unwanted) modifications.
Enable DSTV
Page A.1 - 2
The shape and bolt designations in a parts list are named according to the latest DSTV standard.
Global Settings
Remove Modifications Drill holes e.g. which lie outside of the shape after a length modification has been performed, are deleted automatically. Remove Links
Logical links, which haven‟t any meaning any more, are deleted when parts are deleted. During normal operation, this option should be turned on.
Remove References When the drawing is cleaned with the AutoCAD command “Purge”, in order to reduce the drawing size, unused shape references can be deleted after confirmation. Check DWG
Each time the drawing is opened, it is verified with regard to invalid group entries. In some cases, unexpectedly big drawings could be created which is avoided using this option.
Recalculate Parts
Internal calculations are not carried out by ProSteel each time a part is „touched“, but only if it is really necessary. This shortens the processing time of some functions.
Group as a Whole This option permits selection of groups as a whole if the AutoCAD system variable “Pickstyle” has been set accordingly. Convert Boolean
In case of Boolean volume operations, the solid, which is responsible for the processing, will be parameterized. Thus it is possibly to modify the dimensions of the processing later, even if the solid responsible for the processing doesn‟t exist any more (in the case it was e.g. only an auxiliary object and has been deleted again).
Ignore Detailing In case of Boolean deduction of parts, the component parts are deducted without detailing. Thus it is easier to switch over from Acis to Facet model and vice versa. However, it may be that not any detailing is carried out correctly. Check Shape Lengths The shape lengths are automatically verified when a shape is inserted. Check Hole Edges The admissible edge distances are automatically verified if drill holes are inserted.
Ignore Inner Contour
Description Layer
Component parts are placed on the corresponding layer indicated in the description file
Page A.1 - 3
Global Settings
Execute Boolean
When logical links are processed, the Boolean volume operations within the parts are carried out before a cut is made. The display of component parts can change by using this option.
Shapes as Acis New shapes are created by means of the Acis modeller. Plates as Acis
New plates are created by means of the Acis modeller.
Log Dwg Input
A log file is created when a file is opened.
Grips
Shapes Modify Length
A grip is created for length change (or for position change) and all measurements can be altered.
Move Cuts
A grip is created for the section. You might now have one grip for changing the length and one for changing the section.
Page A.1 - 4
Global Settings
Please note: When you move a section grip in a way to shorten the length of the shape, the length grip is moved simultaneously. When you move the length grip over the section grip, the shape will be cut off at the same spot, because you have not moved the sectional plane. When you move the section grip over the length grip, you eliminate the section from the shape (although the sectional plane remains at the section grip) the section grip “seizes” the sectional plane, while the length grip “seizes” the shape length. When you stretch a cut shape, the section angle within the shape remains the same, just like in reality. Move Holes
Drill holes receive a grip and can be moved. Otherwise they remain where inserted when the shape is stretched.
Move Polycuts
Poly-sections receive a grip and can be moved (the original form of the poly-line is stored; therefore you only move the line). Otherwise, the section remains where inserted when the shape is stretched.
Only Along Center Line Shapes can only be stretched along their axis, i. e. a change of position is not possible. Layout
When you have entered a value > 0 in this input field, the length of the shape can only be changed via grips in preset modular steps. When you have entered 0, any kind of change can be performed.
Plates Modify Plate Size
A grip for changing thickness is displayed, in all other cases only form changes can be performed.
Move Cuts
All other plates fields have same definition as the shape fields. Please refer to this chapter for more detailed information.
Page A.1 - 5
Global Settings
Shapes
With the exception of the additional dialog tabs and some specifications, most of the settings can be found under the section describing the shape properties. Offset Centre Line You specify the length beyond which the centre line has to exceed the shape ends. Maximum Shape
Page A.1 - 6
If you enter a value bigger than 0 and you have checked the entry „Verify Shape Lengths‟ under „Options‟, and shapes are inserted, a message is displayed drawing your attention to the fact that the maximum delivery length is exceeded by some shapes. A hint dialog appears and the corresponding shapes are highlighted in colour.
Global Settings Shapes...Labels
In the 3D-model a shape labelling can be displayed additionally, the
configuration of which is set here. Text Size
Enter the text size of the shape labelling.
Page A.1 - 7
Global Settings
Distance
Enter the distance between labelling and the upper side of the shape. However, don‟t forget that the actual size depends on the set global scale of the drawing.
Position No. Prefix This designation is put in front of the position number. Text Style
The AutoCAD text style for the labelling text
Label
The name of the shape is additionally added to the labelling.
Position Number The position number is additionally added to the labelling. Length
The length of the shape is additionally added to the labelling.
Note2
The content of the note2 field is output as well. If the „Below‟ field is also checked, it will be displayed in a second line.
Page A.1 - 8
Global Settings
Dynamic
The text of shape labelling is dynamically adjusted to the view for depictions in paper area if the “Viewport- support” has been activated.
Page A.1 - 9
Global Settings The advantage is that the text has the same size independent of the scale in the view window. Select the AutoCAD text style to be used for the labelling in the selection list Text Style. Shape Type not to be labelled In this input field you enter the shape types, which have to be excluded from labelling. The advantage is that only shape sizes differing from a default value will be output individually.
Shapes...Sketch Display
Sketch Size Sketch Length
Page A.1 - 10
You can enter the length of sketch display from the centre in the Value input field below to outline the shape as solid. If you enter the value 0, the result will only be a cross-section display at the centre.
Global Settings
Relative Length You can enter the relative size of sketch display related t o the overall length of the shape in the Value input field below. End Offset
You can enter the distance of the end points of the displayed system line towards the actual insertion points in the „Value‟ input field below.
Layout Insertion Line
The insertion line of the shape is displayed as system line of the shape (which could for example be the upper edge).
Middle Line
The middle line of the shape is displayed as system line.
Here, you can see an example for a sketch display as well as some corresponding dimensions:
Page A.1 - 11
Global Settings Shapes...Name Conventions
Input Fields
Here, you can indicate a general default consisting of format variables and constant designations for the indicated shape type in question. All format variables are placed in round brackets and start with a $-symbol outside the brackets. Thus they can be identified as variables at once. This is followed by the format specification for the desired dimension. Format Specifications: $(W) shape width $(H) shape height $(T) shape thickness $(D) outside diameter in case of round shapes or edge length at square shapes
Page A.1 - 12
Global Settings Shapes...Flat Steel Selection
Select from List Dimensions of e.g. end plates which are preferably produced of flat steel can only be selected from flat steels existing in the database. When the option is not activated, you can indicate any lengths and widths.
Metrical/Imperial List
Here, you select the kind of shape designation from the selection lists depending on the unit system of the model.
Places after Decimal Point Here, you specify the accuracy of the dimensions in the list display depending on the unit system of the model. E.g. it is possible to nevertheless use the American designations in models with metrical unit system and to have them displayed with a higher accuracy than metrical designations would normally permit.
Page A.1 - 13
Global Settings
Straight Plates
With the exception of the additional dialog tabs and some specifications, most of the settings can be found under the section describing the shape properties.
Grid lengthwise Here you enter the lengthwise grid distances if a grid is to be displayed. Grid cross-wise Here you enter the cross-wise grid distances if a grid is to be displayed. Grid Length
This is where you specify the maximum grid length running from the outer edge of the plate or from existing inner contours. If you enter the value 0, the plate will be displayed with a complete grid. This option permits you to display the plate without complete grid. The display is limited to the contour edges. Shapes that are situated below remain visible by this way.
Grid Height
Enter the grid height here.
Grid = Thickness The grid height always corresponds to the current plate thickness.
Page A.1 - 14
Global Settings
Offset Middle Line If you selected the display as middle line, this is where you enter a projection of the middle line over the two plate surfaces. In contrast to shapes, the centre line of plates is not running along the longitudinal direction but along the plate thickness. Input Thickness You can indicate the plate thickness in the insertion dialog, as you like. Otherwise, only the values of a selection list are available (preference values). Volume Weight
The weight of the plates is determined by the volume.
Plates...Labels
Since this dialog tab is identical with the shape labelling, please refer to this chapter for the meaning of the input fields.
Page A.1 - 15
Global Settings Plates...Description
Standard Plate Name Name of the plate when it has been created by means of ProSteel. Desired Plate Name Name of the plate which has to be used for PPS- / NC-output.; Keep this name later, otherwise there will be compatibility problems with output. Description of Name Here, you specify the format default of the plate name as it is used e.g. at labelling and in the property fields. Position Flags
Here, you specify the format default of the plate name in position flags.
Export
Here, you specify the format default of the plate name at the export of parts list data. Format Default Structure: The names like e.g. $(N) serve as variable for the current value of the corresponding plate and are explained in the dialog itself. The „Name‟ of the plate is the constant part like plate, grating, etc.
Page A.1 - 16
Global Settings
In the input fields of the corresponding description, you can enter a text consisting of the variables and any other characters. When the program is running, the variables are replaced by the current values e.g. for the length and the other characters will be kept as in the original input. Round at...
Here, you specify the accuracy to which the specifications concerning dimensions of the plate name have to be rounded. This doesn‟t have any influence on the actual dimensions of the plate model.
Length greatest... The greatest value of dimensions is always regarded as plate length. This doesn‟t depend on how you inserted the plate.
Plates...Calculation
Here, a dialog tab opens where you can determine the method for calculating the weight of the plate resp. the surface to be painted. These specifications influence the result in the parts list output.
Page A.1 - 17
Global Settings
The values can be defined according to the exact form, according to the rubber tape-method (as if a rubber tape was tightened around the plate) or according to the smallest surrounding rectangle. For plates having a grid (e.g. to display a gridiron) you can reduce the weight to the percentage value indicated in the input field Weight at Grid.
Bolts
Layout
Bolts can be inserted into the drawing with different display settings: as Middle Line, Line with Circle, Extruded Circles or in real Display.
Back to Back
permits automatic bolted connections back-to-back; the bolts are guided through all parts (penetrating bolts).
Global Workloose It is not possible to set an individual clearance in the dialogs, but a uniform value is used instead. Round...to
When the bolt is attached, the found clamping length is rounded to a clamping length which can be divided through the indicated value.
Round bigger...
The rounding is set to the next bigger value. The found clamping length is not decreased, but always increased.
Search smaller... If a bolt cannot be created with the found size, the next smaller bolt will be searched and used.
Page A.1 - 18
Global Settings
Bolt Weight
The bolt weight is calculated approximately unless a weight has been indicated in the database.
Page A.1 - 19
Global Settings
Work Frame
Frame
The outer frame will be displayed.
Diagonal
The diagonal will be drawn.
Cut Plane
The cutting planes are displayed.
Origin
The coordinate system of the working area (ECS) will be displayed.
Area Name
The frame text will be displayed.
Dynamic...
The frame text will be displayed dynamically so that axis designations can be read well in 3D, too.
Size Adjustment The frame text will be adjusted to the particular size of the display. Update Shapes Shapes inserted on work frame axes are moved as well if the work area is modified. Left Designation The left axis designation will be displayed. Right Designation The right axis designation will be displayed.
Page A.1 - 20
Global Settings
Assembly
Depiction
Indicates how an assembly object has to be displayed in the drawing. It may be displayed as UCS-symbol, sphere, envelopping box or not at all.
Character Size
Sets the symbol size of an assembly object to be displayed in the drawing.
Page A.1 - 21
Global Settings
Values Resolution:
The input fields are used to specify the resolution for creating circular volumes. The higher the resolution, the more detailed the display but the computer processing speed decreases. Use high-resolution settings only for large scales and important details. Due to some special features in the volume-modeller, you should only specify odd numbers here. However, this only influences the Facet Modeler.
2D Subpart
Specify the size of the pick helper symbol for detailed construction groups. You need the pick helpers to access the individual parts of construction groups in the workshop drawing after the detailing.
Clip Plane Distance Specify the front and rear section plane distances of the object view.
Page A.1 - 22
Global Settings
Rounding Stiffener Thickness Here, you specify the accuracy the plate thickness of the calculated stiffener thickness has to be rounded at stiffeners in connections. An unnecessary accuracy can thus be avoided resp. only certain plate thicknesses, which are available in the workshop, will be used. Front/Rear Distance Here, you specify the front or rear distance of the sectional area which is used as standard value for a limited visual depth (sectional area). Specific Weight Steel Here you define the specific weight of steel to be used as basis for weight calculation.
Logical Links
Create Passive
The active or passive links referencing the corresponding components are created.
No Update
Any changes made to a component are not passed on to its associated components using an update.
On Request
You are prompted to indicate if any changes made to a component are to be passed on to its associated components using an update.
Page A.1 - 23
Global Settings
Automatic Update Any changes made to a component are immediately passed on to its associated components using an update. Lock Part Properties The part properties created under the control of a logical link can only be read but not edited. Structural Elements... The automatic update of all structural elements such as bracing, staircases, etc. is suppressed. Allow additional data You can enter additional data of logical links e.g. an identification code.
Page A.1 - 24
Global Settings
Revision Check
Length Tolerance Tolerances
Here, you specify the tolerances to be used for comparing the component parts. You can specify the values for line length as well as the comparison of drill holes, lengths and weight. Modifications are determined by means of a type of comparison which is also used for positioning.
Single Parts At Changes
Here, you specify the behaviour of the single part position number at a changed part. Keep – The position number is not changed. Confirm – The position number is only deleted if this is individually confirmed for each part. Delete – The position number is always deleted.
Page A.1 - 25
Global Settings
Storing
Here, you specify what has to happen with the invalid (former) position number at a changed single part. No Storing – The position number is ignored. Confirm – The position number is only stored as original position if this is individually confirmed for each part. Save – The position number is saved as original position.
Groups Here, you specify the behaviour of the group position number at a changed part. The possible specifications correspond to those for single parts and are described there.
Others Modify Flag
Page A.1 - 26
The part is only checked as modified if it has already a position number.
Global Settings
Display
Viewport
Here you can set the support of optimum depiction when working with view windows in the paper area. Without Support – No adaptations are made within the depiction. Only for normal output – The depiction of the shape labelling is e.g. adapted to the depiction scale if dynamic adjustment option has been activated. Complete Support – A complete support of the depiction takes place.
Shape Clipping
The active UCS plane (top view) displays the cross-section of the object tapered to it theoretically. This option should be turned on. When this option is switched off, you do not get a correct cross-section top view of an object if it starts below and ends above sectional plane.
Plate Clipping
This option is identical with ShapeClipping, but it is only valid for plates.
Page A.1 - 27
Global Settings
Suppress...
Any shape labelling inserted into the model is hidden if the function “Hide / Shade” is selected.
Cache 2D
The result of all line calculations effected by the volumemodeller (e.g. at a 2D-depiction, object snap, etc) is written into an intermediate storage. A new calculation is only made in case of modifications. Thus the processing speed for the determination of AutoCADobject snap-points especially in case of complex construction groups is considerably increased.
No Bolts...
Bolts are not displayed when the function “Hide / Shade” is selected.
Real Bolts...
Bolts are displayed as real objects when the function “Hide/Shade” is selected. This option should be turned on during normal operation.
Real Arc...
Curved shapes (arcs) are displayed as real objects when the function “Hide/Shade” is selected. This option should be turned on during normal operation
Position Flags at Shade All position flags placed in the model will not be hidden when the function “Hide/Shade” is selected. Additional Lines at Shade All lines in the model, like centre lines, gravity lines or other construction lines will not be hidden when the function “Hide/Shade” is selected. Workframe at Shade All work frames within the model will not be hidden when the function “Hide/Shade” is selected. Structural Objects at Shade Structural objects are displayed when the function „Hide/Shade‟ is selected. Display Hole
Holes are always displayed as polygons consisting of lines, even if it is a matter of real holes in ACIS-objects.
No Subpart Grips There is no output of subpart grips at plotting. No System Lines
Page A.1 - 28
There is no output of system lines of structural elements at plotting.
Global Settings
Colours
Input Fields
Here, you set the colours to be used for the different display markings and objects of the program by indicating the AutoCAD colour number. Please refer to the corresponding commands for the meaning of the different markings.
COLOUR SELECTION You can also select the colour in a comfortable way by clicking the corresponding input field and then loading the AutoCAD dialog for colour selection.
Page A.1 - 29
Global Settings
Monitor Colours
Background
The background colour of the monitor.
Foreground
The colour which is normally used for displaying objects in the monitor.
Symbol Colour
The colour which is normally used for displaying the pick points in the monitor.
Marking
The colour which is used for displaying highlighted objects or pick points in the monitor
COLOUR SELECTION You can also select the colour in a comfortable way by clicking the corresponding input field and then loading the AutoCAD dialog for colour selection.
Page A.1 - 30
Global Settings
Configuration / Iso-Views
Here you specify how to set the global iso-views of the program. To define a view, zoom or turn the model into the view to be used as iso-view. Then, press the button and the pre-set values will be adopted as pre-set view iso1 up to Iso5. These views are also available in the DetailCenter.
Page A.1 - 31
Global Settings
Configuration...Layer
This dialog tab is used to realize the configuration of ProSteel. Here you set the layer names, colours and line types.
Page A.1 - 32
Global Settings
Configuration...Flat Steel Selection
This dialog is used to set the preset files for flat and wide-flat steel from which the flat steels have to be taken in the further run of the program.
Page A.1 - 33
Global Settings
Dialog Settings
Expert Mode
Here, you can configure different display properties in the dialogs. The following options are available for selection: Beginner, Middle and Expert. This setting has an influence on the display of constructional graphics in the dialogs and more.
Accuracy
Here you specify the value for the display accuracy of lengths, angles and other values. If you selected the option “Use AutoCAD settings”, the accuracy depends on the system settings (LUPREC). Otherwise, you specify the desired value here.
RollOver
Here, you switch on RollOver for the dialogs.
Input of Hole Dia
You can specify any hole diameter. If this field is not checked, you can only specify hole diameters from a given list.
Dynamic Point Input This option permits dynamic zoom and pan during the picking of points or lines. Tabs one after the other If there isn‟t enough place, the selection tabs for the pages of a dialog are displayed one after the other instead of next to each other.
Page A.1 - 34
Global Settings
No Updates
Switches off the dynamic update in the dialogs. The advantage is during operation in the case of very complex calculating processes. To permit a manual release of update an additional button with an exclamation mark is displayed in the command line of some dialogs.
Coloured Icons
For some symbols different colours are displayed instead of the symbols of one colour (blue).
RETURN to select all ALL parts in the model are selected at a query when you enter RETURN in the selection functions of ProSteel.
Dialog Settings...ToolTips
Suppress...
The ToolTips are not displayed in the dialogs.
Delay
The period (in milliseconds) until a ToolTip of an input field is displayed at all.
Display Time
The period (in milliseconds) how long a visible ToolTip of an input field is displayed.
Page A.1 - 35
Global Settings
Dialog Settings...Classes/Families
Here you enter the standard values for the number of available selection, display, area classes and part families.
Page A.1 - 36
Global Settings
Dialog Settings..Match Properties
In this dialog, you can specify the default settings for the properties of individual object types in ProSteel. Select the object type in the Selection List. The depiction of the dialog tab will be adopted. Please refer to the descriptions of the different object types for the meaning of the entries. The default settings are used by MatchProp-command in AutoCAD.
Page A.1 - 37
Global Settings
Configuration Files
The basic configuration of ProSteel is effected via different files which you can see by corresponding selection and which you can edit using the integrated text editor. DELETE TEMPORARY FILES Click this button to delete any existing files in the temporary directory. By deleting the temporary files, you reset all command dialogs to the original state at delivery. DELETE TEMPLATES Click this button to delete all existing data in the template directory. However, please remember that in this case all dialog templates created by you will be irrevocably deleted. Important templates such as e.g. certain company standards should be saved elsewhere.
Please note that you have access to this page only via “Expert Mode”, because the modifications made here have a decisive influence on the operation of the program.
Page A.1 - 38
Modelling and Part Lists
B Modelling and Part Lists
Page B - 1
Modelling and Part Lists
Page B - 2
Layer Functions
B.1
Layer Functions
The program is equipped with an automatic layer control. Normally you don‟t have to take care of this. If you use the program commands to create different objects such as shapes, dimensions, welding symbols, etc., these are created on their own layer. The activation, deactivation, and switching of layers is one of the most frequently performed tasks when using AutoCAD. ProSteel supplies its own switching functions for this purpose. Switching to the most important layers can be done with just one click, and without long searches. Select the command by clicking its associated button or enter PS_LAYER from the keyboard with the indicated parameter. Work Frame On:
LFRAMEON The layer with the frame for the work area is activated.
Work Frame Off:
LFRAMEOFF The layer with the frame for the work area is deactivated.
Element Layer On:
LELEMON The layers for the main elements are activated. These are the layers for shape, roof/wall shapes, plates, construction lines, and bolts.
Element Layer Off:
LELEMOFF The layers for the main elements are deactivated. These are the layers for shape, roof/wall shapes, plates, construction lines, and bolts.
Page B.1 - 1
Layer Functions Additional Layer On:
LADDION The layers for the additional elements are activated. These are the layers for dimensioning, midlines, position flags, relative heights, welding symbols, etc.
Additional Layer Off:
LADDIOFF The layers for the additional elements are deactivated. These are the layers for dimensioning, midlines, position flags, relative heights, welding symbols, etc.
Object Layer Current:
LOBJECT The layer for a freely selectable element becomes the current layer. You can select the element by clicking it.
Object Layer Off:
LOBJECTOFF The layer for a freely selectable element is deactivated. You can select the element by clicking it.
Construction Lines Current:
LCONSTAKT
(black lines)
The layer for the construction lines becomes the current layer.
Construction Lines On:
LCONSTON
(brown lines)
The layer for the construction lines is activated.
Page B.1 - 2
Layer Functions Construction Lines Off:
LCONSTOFF The layer for the construction lines is deactivated.
Layer 0 Current:
LNULL The AutoCAD-Layer „0‟ becomes the current layer.
Page B.1 - 3
Layer Functions
Page B.1 - 4
Construction Utilities
B.2
Construction Utilities
B.2.1 Construction lines The program offers several options to create construction lines, divide distances evenly or measure distances which all serve as design and constructional aids. These lines are created on their own layer (default is PS_CONST), so that all of them can be jointly hidden or deleted.
Direction
Indicates how the direction of the construction line is defined.
2 Points
You have to pick 2 points.
Line
You pick a line.
Point Line
You pick a line for direction and a point for position.
Line Type
You can either use standard lines the length of which is determined by projection or X-lines which always run up to the edge of the screen.
Distance
The distance of the construction line(s) from the displayed line in case of parallel or vertical construction lines; resp. the distance of one line to the other if several lines have been generated.
Page B.2 - 1
Construction Utilities
Scale
Distance / spacing information is converted to the scale of your drawing indicated here. This allows actual dimensions to be used.
Angle
The construction lines are rotated by the angle indicated here.
Number
The number of construction lines or divisions created simultaneously when using the Divide function.
Offset
The construction lines are extended at both ends by this value with respect to the displayed reference line.
Only in Plane
All construction lines are only created on the current UCS (user coordinate system)-plane. In addition, possible picked points are projected to the current UCS-plane as well.
Create Reference Line A construction line is drawn on the reference line as well (even for a non-existing line indicated with only 2 points). Loop
The function is repeated until the procedure is interrupted. This creates a construction line parallel towards the current UCS-x-axis, either at the picked point or with the selected distance to the picked reference. This creates a construction line parallel towards the current UCS-y-axis, either at the picked point or with the selected distance to the picked reference. This creates parallel construction lines for a reference line selected or displayed via pick points. This creates vertical construction lines for a reference line selected or displayed via pick points. The reference line created by two pick points is divided into equal sections with the help of construction lines running perpendicular to this distance. A 3D distance is measured and displayed in different variations. Starting and end point have to be picked.
Page B.2 - 2
Construction Utilities
A 3D distance is measured and displayed in different variations. The end point of the previous measuring is used as starting point of the current measuring.
All construction lines created up to now on the layer are deleted.
Page B.2 - 3
Construction Utilities
Direct Use of Some Settings You may also use selected settings to create construction lines directly and to create construction lines much more rapidly. The number and type of the lines depends on the Number and Line Type settings as described in the previous dialog window regarding construction lines command PS_CONST. The commands remain active until terminated by pressing the ESC-key or the right mouse button. HINT: The construction lines are created only within the current user coordinate system plane. It is best to use them only in the views.
PS_CONST_HOR This command creates a horizontal construction line. Click a point the construction line is to intersect. PS_CONST_VER This command creates a vertical construction line. Click a point the construction line is to intersect. PS_CONST_PAP This command creates a construction line running parallel with a reference line. First click the reference line and then on a point the construction line is to intersect. PS_CONST_PAE This command creates a construction line running parallel with a reference line using a specified distance. First enter the desired distance and then click the reference line. Finally, click the side of the reference line along which the parallel line is to be created. PS_CONST_SAP This command creates a perpendicular construction line for a reference line. Click the reference line and then on a point the construction line is to intersect.
Page B.2 - 4
Construction Utilities
PS_CONST_SAE With Distance: This command creates a perpendicular construction line for a reference line. With Distance from a Reference Point: First enter the desired distance and then click the reference line. Finally, click the reference point and then on the side of the reference point where the perpendicular line is to be created. PS_CONST_DVD This command divides a reference line into equal segments and creates corresponding perpendicular construction lines along this line (also utilizing the start and end point). First enter the number of sections and then click the reference line. PS_CONST_DEL This command deletes all construction lines drawn up to then on the layer created for the construction lines.
Page B.2 - 5
Construction Utilities
B.2.2 Measure of distances Choose the Measure command if you would like to measure a distance. Then click two points, which returns the following dialog box showing a few measurement results.
The area „Coordinates in UCS‟ shows the measuring results regarding the current user coordinate system! Start or End X, Y, Z are the coordinates of the two measuring points. Distance in X, Y, Z is the distance in the direction of the respective coordinate axis. Dist Direct is the direct distance of the points. Angle is the angle from the start to end point in reference to the user coordinate x-axis. The section „Coordinates in WCS‟ shows the measuring results regarding the current world coordinate system. Start or End X, Y, Z are the coordinates of the two measuring points in the WCS and Cos X, Y, Z is the so-called „directional cosine‟ of the vector from start to end point (a mathematical size which normally hasn't any further meaning for you).
Page B.2 - 6
3D Object Views
B.3
3D Object Views
B.3.1 Object View / Object-UCS The object view is a very important tool because it allows you to look at nearly any ProSteel-object from a certain direction. The object view command is used to align the UCS plane on an object, which results in a perpendicular view on this plane. The origin of the UCS can either be perpendicular from the pick point to the centerline or be situated at the pick point itself. This depends on the selected setting „Object View‟ or „Centered Object View‟. The object is aligned in such a way as to center the pick point on the screen and align its insertion direction parallel to the X-axis. This means that a shape inserted into a work frame at a slant is displayed as running horizontally, and the surrounding work frame is rotated accordingly. HINT: If the view does not match the model position select the command again (e. g., using the right mouse button with the context menu) and confirm immediately with RETURN. The view is aligned. Alternatively, you can keep the ALT-key pressed while selecting the view direction. Thus, the view is forced to align as well. The command „Object-UCS‟ runs analogously to the command „Object-View‟. In contrast to object view however, this command only sets the UCS on the selected view direction. The view itself is not modified.
Page B.3 - 1
3D Object Views The following message appears in the command line after the command „Object View‟ has been selected: Pick the steel component defining the view or hit RETURN to align the view. After part selection, coloured coordinate crosshairs are displayed on the selected component and the following message appears in the command line: Select the desired axis. Now use your mouse to click the corresponding coloured circle and the object view is displayed with the selected direction. You want an object view on front. Pick the shape while keeping the ALT-key pressed, clicking one of these lines on the front,...
..and coordinate crosshairs appear at the pick point. You can now select the matching colour by clicking it.
The view is displayed, the UCS‟s origin is aligned and parallel with the front.
Page B.3 - 2
3D Object Views
B.3.2 Surface View / Surface-UCS In principle, this command is an object view; thus you can refer to the above chapter for the basic description. In contrast to the object view that only allows 6 possible view directions (rectangular or parallel to shape direction), the surface view offers you the option to look on each surface of the component part. In case of special shapes with sloping surfaces it is easier to obtain the suitable view. The picture below shows you an example of a surface view: By clicking the displayed line (component edge), you can get a view on the surface 1 or 2.
When you select the function, you first have to click the desired component part at a bordering edge between two surfaces. Then the coordinate crosshairs are displayed at this position and you can select the desired view by clicking an axis. If you have selected the command PS_FACE_VIEW_CEN, the origin of the view is situated in the middle of the clicked line.
Change only UCS Analogously to the command Object-UCS you can only set the current UCS on the desired surface view as well without modifying the actual view. Here, too you can choose between the picked and the centred origin.
Page B.3 - 3
3D Object Views
B.3.3 Global View This command shows the 3D model in a global view display. The default is an isometric display of the model diagonally from the right front. However, four other global view variants with their own direct calls are possible as well: PS_GLOBAL_VIEW2 ... PS_GLOBAL_VIEW5. The different overviews are specified in the Global Settings
Page B.3 - 4
3D Object Views
B.3.4 Top View The top view command is identical with the AutoCAD command “vpoint 0,0,1” , i.e. you are viewing the current UCS-plane vertically. This command switches to the true model top view from within the global view. It does not have a function in the other views because you already view the plane vertically. Remember the difference between this top view and the top view used for a work frame with roof:
Page B.3 - 5
3D Object Views
B.3.5 Free View The ‟Free View‟ command creates a model view where you select a source and target point. The view then presented appears to be from your source point to the target point. The following message appears in the command line after the command „Free View‟ has been selected: Select the target point of the line of vision direction. Now you determine the target point by entering the coordinates or by clicking it. The following message appears in the command line: Select the source point of the line of vision direction. Specify the source point by entering the coordinates or by clicking it and the view is visible on the screen. The cutting plane command is activated. Changing the distances is not possible here and can only be done using the global settings of ProSteel.
Page B.3 - 6
3D Object Views
B.3.6 Cutting Plane Working with a 3D model can quickly turn complex, especially if many parts are spatially stacked. ProSteel offers a command to hide parts in front of and behind the current work plane – the cutting plane. This facilitates the design process since only those objects are visible that are close to the same work plane and prevents the accidental manipulation of stacked shapes. When selecting one of the defined views or an object view, such objects are automatically hidden, provided that you have not turned off this command globally. Sometimes it is however also reasonable to look at all component parts of the model in the depth – to have an overall orientation. This is the reason why this function can be switched on and off.
Principle of Cutting Planes When the function „Cut Plane‟ is active, only those parts of the work frame are shown that are located within the limits of the cut plane distance. The cut plane distance is the distance between imaginary delimitation in front of and behind the active UCS plane.
Off
The cut plane command is deactivated. All component parts are shown. When switching to another view, the command is activated again, provided that it has not been turned off globally.
Page B.3 - 7
3D Object Views
On
The cut plane command is activated. Only those component parts that are located within the delimitation are shown. If the command has been turned off globally, it is turned on again when switching to another view.
Flip
The cut plane command is alternately switched on or off globally. This command makes sense when you do not want to work with the cut plane command for a long time.
Distance
Input of the cut plane distances First enter the rear distance and then the front distance. When you enter the distance 0, no cut planes are created. When switching to one of the standard views, these values are overwritten.
3D-model of a stage construction in the global view
(Object-) view on the upper stage frame with switched on cut plane command (standard setting)
(Object-) view on the upper stage frame with switched off cut plane command
Page B.3 - 8
3D Object Views
B.3.7 Perspective View 3D-design usually utilizes the isometric 3D depiction. This means that a line located very far back appears to be as long on the screen as the distance located further to the front. In reality, however, distances appear to shrink the farther they are removed from an object. This effect can be simulated with the perspective view. The perspective view is a form of free view using a fictional camera. You are prompted for the position of source point (camera) and target point (motif, centre of picture) and this determine the line of vision. The parameter Focal Distance is used to indicate - as in photography - the focus of the camera. Larger values are used to zoom the object as if using a telephoto lens. Smaller values create a wide-angle effect. The parameter Distance is used to subsequently change the distance to the target point and move back and forth along the indicated line of vision. If you select the command, the following message appears in the command line: Select the desired function Off/Distance/Focal Distance/ . You can now select a function or select the command directly using the corresponding button: Set
The perspective view is activated. This requires that you first enter the target and source point of the view and then the focal distance of the camera. The program switches now to the perspective view.
Off
The perspective view is deactivated. The program switches now back to the isometric view.
Focal Distance
Here you can change the focal distance of the camera.
Distance
Here you change the distance of the camera from the target point.
Lines of vision changes are only possible using coordinates and the pick function is deactivated. Changing to the model global view does not yield the desired result until the perspective view is deactivated again.
Page B.3 - 9
3D Object Views Remember that the perspective view is only a display view and does not allow any changes. For that, switch back to the isometric display. In the following, you will see some examples of the difference between the perspective and the isometric display as well as the effect of the focal distance on the isometric display: Isometric Display
3D Global View Isometric Display The point down on the left (0,0,0) is also the point of origin of the world coordinate system.
Front View Isometric Display You see a view with the settings Target point = (5000,0,5000) Source point = (5000,-100,5000)
Page B.3 - 10
3D Object Views Perspective Display
Front View Perspective View Focal distance = 50 The source and target points are first set identically to the points of the isometric view. However, since the picture is much too large, the distance from camera to target is increased to 30000. This corresponds with the source point (5000,-30000,5000).
Front View Perspective View Focal distance = 100 The focal distance of the camera is increased but the picture shows only a section of the result.
Page B.3 - 11
3D Object Views
Page B.3 - 12
Move and Copy Parts
B.4
Move and Copy Parts
The notes about the AutoCAD standard commands mention the fact that ProSteel objects are treated as AutoCAD elements, and can be copied or moved the same way. This is correct, but the ProSteel copy and move commands offer you additional help by offering the option of limiting the direction of the move. Apart from that, you can specifically take the group structure into consideration. Using AutoCAD object snaps in a view may result in points being selected that are not in the proper plane. The ProSteel copy and move commands prevent this by limiting the direction of the move to the current user coordinate system plane or even to one axis direction. If several individual components have been assembled into construction modules or groups, this command can be used to process the entire group by selecting just one part of the group. This will eliminate unnecessary searching and collecting of the parts within a selection set. After the command has been selected, a dialog box will become available featuring the following options, each single tab permitting a certain action.
This button carries out the selected action for single parts without taking into consideration a possible group.
This button carries out the action for complete groups. In the options, you can specify whether this selection has to be made only when the main part is picked or for each part of the group.
Page B.4 - 1
Move and Copy Parts
B.4.1 Move/Copy Alignment
Here, you select the move direction of the actions. A cone shows you the move direction. 3D – The selected elements can be moved in all three dimensions. 2D – The start and end points of the move are perpendicular to the current UCS-plane. This means that shapes are only moved within this UCS-plane. X-Axis - The start and end points of the move are perpendicular to the X-axis of the current UCS-plane. This means that shapes are only moved parallel to the X-axis within this UCS-plane. Y-Axis - The start and end points of the move are perpendicular to the Y-axis of the current UCS-plane. This means that shapes are only moved parallel to the Y-axis within this UCS-plane. Z-Axis - The start and end points of the move are perpendicular to the Z-axis of the current UCS-plane. This means that shapes are only moved in vertical direction to this UCS-plane. Free – You can move the selected elements in any of the three dimensions. The elements “drag” with the crosshairs and thus can be visibly moved.
Multiple
The elements can be moved several times.
Page B.4 - 2
Move and Copy Parts
B.4.2 Turn
Axis
Here, you select the desired rotation axis. Free Axis – The rotation axis can be determined by clicking two points. Object Axis – One of the (parallel) coordinate axes of the element UCS is specified as the rotation axis. By specifying a starting point after selection of the parts you can move it in parallel direction.
Object Axis
Here, you select the desired part axis if the „Object Axis‟ option has been specified. The selected axis is displayed at the object selected first in colour for your orientation.
Angle
Specify the rotation angle. Select either one of the defined angles or the „Free‟ field for indication of any rotation angle you like.
Turn+Copy
A copy of the component parts is created first which then will be turned. Otherwise, the original parts are rotated to the new position.
Page B.4 - 3
Move and Copy Parts
B.4.3 Mirror
Method
Enter the desired mirror plane here. 2-Points – You can determine the plane by clicking two points. The mirror plane is then perpendicular to the current view and aligned with this line (for this purpose, it is best to use a perpendicular view of the component). 3 Points – The plane is indicated by clicking three points in space.
Mirror+Copy
A copy of the component parts are created first which then will be mirrored. Otherwise, the original parts will be mirrored.
Page B.4 - 4
Move and Copy Parts
B.4.4 Align Use this command to align a component or an entire construction group in respect to a certain plane or coordinate system. Specify two coordinate systems, which are then aligned congruently with one another. The calculated required movement and rotation are applied to the selected parts. You can determine the coordinate systems either by specifying three points for each one or via element surfaces. There, the point of origin is always regarded as the bottom point of the surface.
Method
Determine the two planes either by specifying three points or via part surfaces.
Align+Copy
A copy of the component parts is created first which will be aligned afterwards. Otherwise, the original parts will be aligned.
Surface Method When applying the surface method, you can only make use of one element. Select the element at an edge neighbouring the desired surface. Then, you obtain a coloured display of the surfaces available for selection. The target surface is selected analogously.
Page B.4 - 5
Move and Copy Parts 3-Point Method If „3-Point‟ was selected, specify the original position after object selection by clicking the origin as well as a point on the X- and Y-axis as a reference position. Then indicate the desired new position by clicking the origin as well as a point on the X- and Y-axis. The parts are then aligned according to the specifications with the origin points being identical. The example below shows how the left shape was aligned on the right shape as a copy. It is moved and rotated at the same time.
Page B.4 - 6
Move and Copy Parts
B.4.5 Clone Use this command to transfer the manipulations performed on a component or an entire construction group to other components. A prerequisite for cloning is that the parts have a position number and that these match. The manipulations are transferred in such a way that all components are identical again after the transfer has been concluded. However, there is the option to limit the manipulations to be transferred to certain types such as only drill holes, etc. For example, use this command to apply the same modifications within a model at a later time. For example, if a hangar has been constructed with many identical supports and holes have to be added later to each support, they may be added to just one support and then transferred to all of the others.
Cuts
All normal cuts are transferred. This includes the mitred cuts as well.
Drill Holes
All drilled holes are transferred.
PolyCut
All poly-cuts are transferred.
Notches
All outlets are transferred.
Boolean
All Boolean operations are transferred.
Page B.4 - 7
Move and Copy Parts When you start this action, you first have to select the component with the manipulations to be transferred. Then select the components, which are to accept the manipulations. However, only parts with the same position number as the original part will be considered. Please remember that the transfer of the manipulations refers to the coordinate system of the parts. For example, if you look at a shape whose parts coordinate system has its origin on the right side and you would like to transfer a drill hole to a part 100 mm from the right but its parts coordinate system originates from the left, this component will receive the new boring 100 mm from the left as well.
Page B.4 - 8
Move and Copy Parts
B.4.6 Rotate This command permits a rotated copy with vertical offset to distribute e.g. the steps of a spiral staircase. Two methods can be applied. The number of steps and the angle between the steps, or by an angle area and the steps to be distributed within this area either/or defines the rotation.
Method
Defines the kind of distribution.
Number
Either the total amount or the number via the angle area.
Angle
Either the angle between the steps or the complete angle.
Vertical Offset
Vertical offset between the different elements.
The construction on the left has been created by rotating the flat steel around the central tube.
Page B.4 - 9
Move and Copy Parts
B.4.7 Settings
Swap Effect
The meaning of the ALT-key during selection of the parts is changed. If these functions are directly selected via the menu, normally the selection as single parts is activated. If you keep the ALTkey pressed during selection, this has the effect that as group is selected.
Group only...
The selection as complete group is only effected if the main part has been selected. Otherwise the selection is made at any part of a group.
Page B.4 - 10
Display / Assign parts
B.5
Display / Assign parts
B.5.1 Hide This command can be used to hide components or whole groups, which means that the parts are made invisible, and cannot be selected. This command permits you to hide only selected components or to show only selected components and to hide all others. This provides a clearer view of the model. HINT: This command is most practical if individual parts are to be hidden from view. To hide/show entire groups of parts it is better to use display classes feature. PS_Hide Select the parts to be hidden after selecting the command. The parts are no longer visible after pressing the ENTER key or using the right mouse button. The command ‟Regenerate‟ (not to be confused with the AutoCAD-command “Regenerate”) will switch all parts back to visible. PS_Hide_Exclude This function is working just the other way round than the previous one. After selecting the command, you can choose the parts which you don‟t want to hide. After pressing the ENTER key or using the right mouse button, all other parts are hidden. PS_Hide_Group This function is working like PS_HIDE. The only difference is that the whole group is hidden, if you only selected one part of the group. PS_Hide_Group_Exclude This function is working like PS_HIDE_EXCLUDE. The only difference is that the whole group remains visible, if you only selected one part of the group.
Page B.5 -1
Display / Assign parts
PS_Hide_Plane This function is working like PS_HIDE. The only difference is that the whole component parts of a work plane are hidden, if you only selected one work plane. PS_Hide_Exclude_Plane This function is working like PS_HIDE_EXCLUDE. The only difference is that the whole component parts of a work plane remain visible, if you only selected one work plane.
Page B.5 - 2
Display / Assign parts
B.5.2 Regenerate This command shows all components hidden by the user or hidden automatically by the program. You have to use this command, for example, to generate a parts list since all processed parts are automatically hidden there for control purposes. This command is not identical with the AutoCAD-command “Regenerate” since the AutoCAD command does not reactivate the components again.
Page B.5 -3
Display / Assign parts
B.5.3 Display Classes You can organize ProSteel-objects from different layers into ”Display Classes”, which are independent of the AutoCAD layers. Contrary to the command ‟Hide‟, which forces you to select all parts individually, here you can select entire object groups and make them visible or hidden. This will simplify the view of the model dislayed on screen. For example, bracings, bay rails, curtain walls, etc. could each be assigned to a display class and displayed or hidden as needed. Each element can exist in only one class at a time. This means that it will be removed from one class if it is assigned to another. After selection of the command, the following dialog opens.
Class Name
The available display classes are listed and the desired class may be selected. In the field Status you see if the elements are currently shown (On) or hidden (Off). You can edit the content of the field Class Name by double-clicking it.
Status
Here, you see the current status of a display class. You can modify the status by double-clicking on it. It is also possible to highlight several lines and to carry out the modification for all highlighted lines.
Page B.5 - 4
Display / Assign parts
This button permits to hide parts without creating an assignment to a display class. See PS_HIDE
Click this button to show all individually hidden parts again.See PS_REGEN.
The elements of the selected display class are hidden.
This command shows the elements of the selected display class.
This command hides the elements of all other display classes except for the selected ones.
This command shows the elements of all other display classes except for the selected ones.
Click on this button to assign elements to a display class. The desired class must be selected in the list first. After clicking the button, select the elements to be assigned to the display class in the model. Click on this button to remove elements from a display class. The desired class must be selected in the list first. After clicking the button, select the elements to be removed from the display class in the model. Count
Indicates the number of available display classes. If you increase the value here, this increases the number of available classes in the drawing.
Complete Groups If this field is checked, the complete group will be selected at selection of elements, even if you select only one part of this group.
Page B.5 -5
Display / Assign parts
B.5.4 Area Classes ProSteel objects may also be assigned to one of the “Area Classes” in addition to the display classes. While the display classes serve to present the 3D constructions in a clearly arranged manner, the area classes are better suited for a logical structuring of the model into construction sections or similar divisions. These “Area Classes” can be used as selection and sorting criteria during the detailing process. Each element can exist in only one of these area classes. This means that it will be removed from one class if it is assigned to another. Area and display classes are completely independent from one another. The function works analogously to the display classes. Area classes can be hidden as well. Please note that in case of overlapping with the display classes the last carried out action will be valid. This means if you hide parts with display classes, they can be displayed again by means of assigned and displayed area classes.
Page B.5 - 6
Display / Assign parts
B.5.5 Part Families The part families are another structuring variant of the construction. The belonging to family classes permits an automatic allocation of position number prefixes as well as a differentiation of the constructive groups by different colours. In addition, components belonging to one family class can have a common detail style for detailing. Each element can exist only in one family class. This means if it is assigned to another family class, it will be removed from its former family class. New is the possibility to assign certain colours and line types for detailing to the members of a part family. For example, you can assign another colour to the girders of a 2D-depiction than that assigned to the supports.
Display List
The currently available family classes are listed as well as the linked defaults of colour, prefix etc.
Single Parts
If you click on a button of this line, the parts are treated as single parts at selection. In this mode, all data of the family classes will be adopted into the components.
Groups
If you click on a button of this line, only the component groups are treated at selection of the parts. In this mode, only the prefixes of the family classes will be adopted for the position number of the group.
Both
If you click on a button of this line, both the single parts and the groups are treated at selection of the parts.
Page B.5 -7
Display / Assign parts Click on these buttons to assign elements to a part family. The desired class must be selected in the list first. After clicking the buttons, select the elements to be assigned to the family class in the model.
Click on these buttons to remove elements from a part family. The desired class must be selected in the list first. After clicking the buttons, select the elements to be removed from the family class in the model
Click on these buttons to transfer the modifications of the entries in the part family to the component parts. After clicking the buttons, select the elements to be updated in the model.
Count
Indicates the number of available part families. If you increase the value here, this increases the number of available part families in the drawing.
By double-clicking on a line, you can modify the definition of the part family.
Page B.5 - 8
Display / Assign parts
Defining Part Families or Changing Properties Any number of different family classes may be defined, to which the components may be assigned. To create a class, just double-click an empty list entry. A dialog opens where you can define the properties. The same method applies to changing the properties of an existing entry.
Description:
Enter the name of your part family here. The entry appears in the selection list and the part properties.
Pos Prefix:
Here, you enter the pos. prefix, which appears in front of each position number itself if the part belongs to this family.
Colour
Enter the colour of the part family here. Indicate the AutoCAD colour number or select it by clicking the SELECT button.
Detail Style
Enter the detail style to be assigned to a component part belonging to this family. Enter the name of the detail style or select it by clicking the SELECT button. Note that assigning detail styles normally should be done inside the DetailCenter. If the DetailCenter is open, the component part list has to be updated after modification of shape properties.
Page B.5 -9
Display / Assign parts
Select Line Type Here, you indicate the line type determined for the 2Ddepiction. The settings can be defined individually for visible, invisible and center lines. Detail Colour
Here you specify the colour to be used for 2D-depiction of the selected line.
Line Type
Here, you specify the line type to be used for 2D-depiction of the selected line.
Please note that the 2D line settings are only activated if the component parts are displayed in 2D. These settings don‟t have any effects on the model display.
Page B.5 - 10
Display / Assign parts
B.5.6 Process Status
The process status of the part is another possibility to check or classify the component parts in the drawing. This function helps you to check the parts in colour according to certain criteria and thus to display the current process status in production resp. installation in the CAD model.
Colours the parts according to their process status
The colour of the parts is removed.
A certain process status is assigned to the parts
The process status is removed from the parts
Page B.5 -11
Display / Assign parts
The preset file is edited (see below)
Permanent
If this button is switched on, the colour cannot be removed from the parts.
Preset File You can define the preset values of the process status function (the names as well as the corresponding colours) in a text file. This can be seen and modified here.
Page B.5 - 12
Display / Assign parts
B.5.7
Search Parts
Use this command to search for parts and components within a model, which meet certain requirements. You can define several conditions, which have to be met at the same time. If these conditions are met, the part is either marked or all parts not meeting the requirements are hidden.
Fields
This list displays the search terms available to you by clicking them.
Operator
Select the respective condition operator between search term and comparison value.
Compare Value Here you indicate the value that has to be filled. Only values existing in the drawing are offered. In case of names, you can also indicate an asterisk (*) for any other characters such as e.g. HE* for HEA,HEB etc. Buttons
Use the following buttons to combine the filter condition with different logical operators.
Page B.5 -13
Display / Assign parts
Complete Filter Condition Here, the complete filter expression is displayed after insertion of all filter conditions. You can reset or restore the last step using the buttons or you can delete the complete filter condition. Specifications
Select the action that has to be carried out with the parts found.
Mark
If this field is checked, all parts satisfying the search condition are marked in colour. Use the command ‟Global Settings / colours‟ to specify what colours to apply.
Hide
If this field is checked all parts not satisfying the search condition are hidden. The hidden parts become visible again using the command „Regenerate„.
Zoom
If this field is checked, all parts satisfying the search condition are automatically zoomed to. A dialog opens permitting you to indicate the display size (zoom factor) and to make an iteration of the different found parts using the keys >.
Condition List
This list displays the current search conditions linked with AND. Click this button to add a search condition formed from the selected search term, operator and comparison value to the condition list. Click this button to start the search. First, you have to select all objects to be included in the search, then the result will be highlighted or hidden, depending on your choice.
Page B.5 - 14
Display / Assign parts
Define Search Condition A search condition always consists of the search term (e.g. length), the condition operator (e.g. >= for “greater than or equal”), and a comparison value (e.g. 2000). For example, if you would like to find all IPE shapes with a length between 1000 and 3000 millimeters, you need to define the following search condition: NAME = (and) LENGTH >= (and) LENGTH 180°.
=0
Page B.9 - 6
Use this option if you want to return to the original position of your plate after rotation.
Insert Plates
B.9.3 Gratings Gratings are a special case in plate production. In principle, you can call any plate a grating, but often customers ask to fall back on standard sizes depending on the manufacturer. Another problem is to determine the weight for the parts list which traditionally can only be calculated in an insufficient way. ProSteel is able to manage gratings (resp. tear plates, fence elements, etc) in their own database files indicating the exact weight per piece. Here, you can comfortably select and insert these elements.
Selection List
Here, you select a grating element for insertion. The dimensions are determined by the database and cannot be modified later. Click on this button to insert the grating element selected from the list. In order to do so, you have to click on the point of insertion. Click on this button to have distributed the selected grating element automatically within a boundary. In order to do so, you first have to click on the border (polyline) and then specify the alignment and the origin of distribution. See also under „Roof and Wall Covering‟.
Page B.9 - 7
Insert Plates
B.9.4 Bent Plates Apart from the different forms of flat plates, you can also create threedimensionally edged or bent plates by using ProSteel. These represent a single 3D-component part which can be depicted in 2D as flat plate with the corresponding bending edges via unfolding. Here, you see a bent plate (1) with several plate segments and its front view (2). Apart from the outside geometry, the created unfolding (3) of the plate shows the bending edges (A) as well.
Generation of Bent Plates To generate a bent plate, you first have to have inserted a flat plate. This plate determines the alignment of the bent plate. Now, click on the BEND button and another dialog opens.
Flange Length
Here, you enter the length of the segment in the direction of the bending angle.
Front Distance Edge Here, you enter the front offset in the direction towards the reference edge. Positive values mean that inwards the segment becomes smaller.
Page B.9 - 8
Insert Plates
Rear Distance Edge Here, you enter the rear offset in the direction towards the reference edge. Positive values mean that inwards the segment becomes smaller. Bending Radius The radius of the bend related to the neutral fibre (half of the plate thickness). To avoid problems with the volume modeller, the radius should always be a little bit more that half of the plate thickness. Bending Angle
The angle of the bend; this is related to the reference segment (reference edge).
Correction Value Unwinding The unwinding is carried out using a correction factor. The correction is multiplied with half of the plate thickness. K = 0 – unwinding on the inner radius K = 1 – unwinding on the center K = 2 – unwinding on the outer radius This correction factor is used for the whole bent plate. Length Calculation Here you indicate the method how the length of the butt straps to be added has to be calculated. Measured for flange length from the end of the bending segment outside edge from the outside edge of the base plate inside edge from the inside edge of the base plate center from the center line of the base plate up to the end of the butt strap Click on this button to rotate the current plate edge including the subordinate plate edges in positive direction around the reference edge. The rotation is effected with the angle specified in the neighbouring input field. Click on this button to rotate the current plate edge including the subordinate plate edges in negative direction around the reference edge. The rotation is effected with the angle specified in the neighbouring input field.
Page B.9 - 9
Insert Plates Combine Plates to Bent Plates
Apart from the adding of butt straps, you also have the possibility to create bent plates from existing plates. In order to do so, select the plates to be connected. Prerequisite for a correct connection of the plates is that you can generate a tangential transition between the two plates. Radius
Indicates the radius of the bend between the two plates.
Inside Radius
Indicates whether the radius has to be used on the inside or outside of the plate.
Delete
The existing plate is deleted by taking it over into the bent plate.
Correction Value Unwinding Please refer to the explanations in the previous section.
Page B.9 - 10
Insert Plates Dependance of Segments The following example vividly illustrates the connections between the segments and their dependencies. You see the isometric depiction of a bent plate and the plan view on the base plate (1). First, the segment (2a) was added to the base plate (1) by using a bending angle of 45°. Then, the segment (3) was added to segment (2a) by also using a bending angle of 45°, but in addition it was equipped with a front and rear (positive) distance to the edge. Finally, the segment (2b) was added to the base plate (1) with a bending angle of 90°. If you now delete or modify the segment (2a), you will also delete or modify the depending segment (3).
Page B.9 - 11
Insert Plates
Dialog Commands ADD SEGMENT Click on this button to add a new plate edge to the plate. In order to do so, you have to click on the plate at the desired reference edge of a plate segment. This determines the alignment of the new segment. The new plate segment is always subordinate to the reference segment. If the reference segment is modified later, the new segment will also be modified in relation to this.
REMOVE SEGMENT Click on this button to remove an existing plate segment (including all subordinate segments). In order to do so, you have to click on the plate segment at any edge you like.
MODIFY SEGMENT Click on this button to modify an existing plate segment later. In order to do so, you have to click on the plate segment at any edge you like. Any subordinate segments of this plate segments will be modified too in relation to this.
CHECK BENT PLATE Click on this button to check an existing bent plate with regard to errors. In order to do so, you have to click on the bent plate at any edge you like.
Important Hint: Please take care that you don’t modify the basic polygon of a plate (e.g. by adding an edge, or similar things) when you have already added segments for a bent plate. The reference edges of the segments would be modified as well and the consequence could be an undesired behaviour.
Page B.9 - 12
Insert Plates
B.9.5 Additional Settings
Always ECS
If you want to insert a plate after an existing contour, you can insert it either according to the current UCS or according to the object contour. This button has the effect that you always insert according to the object ECS. The settings on the first page will be ignored.
File Path
The file path to possibly existing database files for gratings. Click on the neighbouring button to comfortably select the path.
Grating Catalogue The desired database file for gratings. Close
The dialog is closed after insertion of a plate.
Page B.9 - 13
Insert Plates
Page B.9 - 14
Insert Solids
B.10 Insert Solids For volume modelling, ProSteel does not use the AutoCAD solid command ACIS, but rather a modified version, which works faster and produces smaller graph files. Consequently, you cannot combine ProSteel objects and AutoCAD 3D solids (e.g. subtract their volumes). In case you do combine objects, there will be no errors, but nothing will happen! In order to give you the same performance range as with AutoCAD, all solids have been redefined. As these solids are real ProSteel objects, they can be processed with the help of ProSteel commands (e.g. drilled). These solids can be detailed as normal component part. Please note that the component parts need a clear direction for detailing. The Xaxis of the UCS valid at insertion is taken as standard. You can, however, determine the axis anew by means of the context menu „Change PS Properties“. Cube/Rectangle: PS_SOLID_BOX This command creates a rectangular object. You determine the edges by clicking the two diagonally opposed corner points or by entering their coordinates. In case the volume cannot be determined by using the points you entered (maybe you clicked on two points on a UCS plane), the program prompts you to enter the missing dimensions.
Sphere:
PS_SOLID_SPHERE This command creates a sphere. First, you have to enter the central point of the sphere and then the diameter of the sphere or click it.
Cylinder
PS_SOLID_CYLINDER This command creates a cylinder. First, you have to enter starting and end point of the cylinder and then the radius or click it.
Page B.10 - 1
Insert Solids
Cone
PS_SOLID_CONE This command creates a cone or truncated cone. First, you have to enter starting and end point of the cone axis or click it and then the starting and end point radius.
Torus
PS_SOLID_TORUS This command creates a torus. This requires that you first click or enter the rotation axis and then enter the outer and inner radius.
Rotational Solid PS_SOLID_ROTATE This command creates a rotational solid from within any polyline. This requires that you first click the poly-line and then on the rotation axis. You can also indicate a rotational angle, around which the poly-line is rotated. Another option is that the poly-line can also rotate around the last drawn line segment, if you press the ESC-key when prompted for the „Rotation Axis‟.
Conical Pipe
PS_SOLID_CONICPIPE This command creates a pipe that is conical on the inside and outside. First, you have to enter or click the longitudinal axis. Then you can enter the outer and inner radius at the respective starting and end point.
Pipe->Rectangle PS_SOLID_RECT2CIRCLE This command creates a transition from a circular to a rectangular cross-section. First, you have to enter or click the lower left and upper right point of the rectangle and then click the circle.
Page B.10 - 2
Insert Solids
Enveloping Solid PS_SOLID_HULL This command creates an enveloping solid formed by any points. This requires that you click the points that are to form the envelope. Using this command, you can create almost any shape (without arcs). Extrusion
PS_SOLID_EXTRUDE This command creates a volume by extruding a poly-line, which you have drawn beforehand. You first click the poly-line and then enter the desired height. The poly-line is then extruded along positive Z-direction of UCS.
Page B.10 - 3
Insert Solids
Page B.10 - 4
3D Modifications
B.11 3D-Modifications It may be necessary to correct the length of shapes and plates already inserted or to provide bevels, notches, etc. When inserting the component parts, you have paid attention to inserting the shape at the correct position using the correct alignment, e.g., you have positioned the axis on a system line. Very often component parts overlap and must be adapted subsequently. Additionally, it may be necessary to rework your model due to modifications... ProSteel offers a large range of commands for the modification of component parts. Some operations can (also) be executed using the standard AutoCAD commands, and the grips. Others, require the corresponding ProSteel commands. There are many different commands for a modification depending on purpose. In the following chapter, these commands are explained in detail. The modifications are divided into commands for all parts, commands only for shapes or only for plates, etc. When you select the command, the following main dialog appears with the commands for all parts.
Page B.11 - 1
3D Modifications
B.11.1
Divide / Combine
Cut at Line This function allows complete shapes to be cut or extended at boundaries, just like the AutoCAD command for the stretching and cutting of lines. For this purpose, you first have to click the shape at the end to be cut and then select the line. The boundary is formed only by a construction line, which is arranged vertically to the active UCS, plane and thus creating a cut plane. If the plane is slanted, the modified shape will have a slanted plane, too. By using this function, shapes that are too long or too short can be adapted to fit after their insertion. When you have typed a value in the Distance field of the main dialog, the shape will be shortened by this value after it has been cut. Please note that the distance refers to a vertical distance between shape and cut plane. The shape is cut at an imaginary plane, the line being oriented vertically to the active UCS-plane. Working in a view simplifies your work, since the shape is cut “at this line”. If the shape could intersect with the line (i. e. you consider the line to be of infinite length!), the shape is cut. To extend the shape, hold down the ALT key while clicking the end to be extended.
Page B.11 - 2
3D Modifications
Cut at Shape The shape is cut or extended at another shape. When the shape is cut, the shorter section is always cut off. Click the shape to be cut and then the shape along which this shape is to be cut. The plane actually hit by the centerline (or the extended centerline) of the shape to be cut will be the cut plane. If the centerline does not meet any surface, no cut can be made! Please note that a logical link is created between the parts if this option is applied. The result will be that if one part is modified, the cut will be automatically updated.
Divide a Shape By using this function, you can divide a shape at a cutting line into two shapes. A single shape, a plate or several elements can be divided into two independent elements. To start with, select the shape to be divided. Then, click the cutting line. When you have entered a distance in the main dialog Distance, both new ends will be shortened by this value. Depending on the setting, you can divide several elements at the same time. However, please note that the distance refers to a vertical distance between shape and cutting line. Distance
The two new shapes are shortened by this value at the cutting line. The arising gap has the double distance value.
At Plane
If this option has been checked, you are asked for three points, which have to form a plane. The parts are divided along this plane.
Page B.11 - 3
3D Modifications The cutting line may be any line. If the line is slanted, the shapes are divided accordingly. If you indicate only one point, it will be used perpendicular to the centerlines. The information for the parts lists is identical for both parts with that of the initial shape, except for the length. In order to master the course of the cut line better, it is recommended to work in one of the view. Example for Platform Design For example, you can easily create changed girders at platform constructions by first laying the shapes to be changed as a whole and then dividing them at their bottom trains. Vice versa, bottom trains can be removed rapidly and the changes at this position can be cancelled. Let us assume that you want to design a platform using the following shapes: platform beams IPE 300, platform edge girders IPE 200, headers HEA 120. Create a working area with these dimensions and insert the shapes at the construction lines Overlaps can be ignored! Change to the top view and use the dialog box for the processing of the elements. As an alternative, you can also process the Y-axes of the general overview in the front view. Since IPE 300 has a flange width of 150 mm, enter the value 75 in the Separation Distance field and click the button DIVIDE. Zoom the points of intersection one after the other, select the uncut part of the cross girder to be separated, and the construction line as cutting line. In the figure on the left, you see that you have several shape parts now that can be connected. You need not insert each partial shape and the risk for dimensional errors is eliminated. If you want to remove beams, you can easily close the gaps between cross girders and create a continuous shape by clicking the function “Combine”.
Page B.11 - 4
3D Modifications
Combine two Shapes This function allows shapes of the same length to be combined, provided that they are exactly aligned! Click the two shapes to be combined. If they are not in alignment, the function will be aborted. The information for the parts lists of the new shape is identical with that of the first selected shape, except for the length. If you keep the ALT key pressed, the shape and the position are not checked. Then, you can combine any shape with any shape.
Page B.11 - 5
3D Modifications
Outlets (Milling Out) Using this function, you can insert simple geometrical shapes of outlets and countersunk parts into your shapes. You can create square, wedge-type, and circular shapes. The dimensions are entered via a dialog box. After selection of the part and the insertion point at the part, the following dialog appears. Select the desired basic form by selecting the corresponding page. Rectangular Outlet
Width
Specifies the width of the outlet.
Height
Specifies the height of the outlet.
Depth
Specifies the depth of the outlet.
Position Width
Select the relative width position to the insertion point.
Position Height
Select the relative height position to the insertion point.
Position Depth
Select the relative depth position to the insertion point.
Page B.11 - 6
3D Modifications
Wedge-Type Outlet
Width
Specifies the width of the outlet.
Height
Specifies the height of the outlet.
Depth
Specifies the depth of the outlet.
Position Width
Select the relative width position to the insertion point.
Position Height
Select the relative height position to the insertion point.
Position Depth
Select the relative depth position to the insertion point.
Horizontal
Select the position of the wedge tip in horizontal direction.
Vertical
Select the position of the wedge tip in vertical direction.
Page B.11 - 7
3D Modifications
Circular Outlet
Width
Specifies the width of the outlet.
Height
Specifies the height of the outlet.
Angle
Specifies the angle of the outlet.
Position Width
Select the relative width position to the insertion point.
Position Height
Select the relative height position to the insertion point.
Position Depth
Select the relative depth position to the insertion point.
Radius
Select whether the outlet has to be carried out as outer circle or as inner circle.
Page B.11 - 8
3D Modifications
Position
You still have the possibility to rotate the inserted notch or cut-out by any of the three coordinate axes. Just click the +90/-90 button, if you want to rotate the cutout in 90° steps. If you require a different angle just enter the value into the Rotation Angle field and then click the +PHI/-PHI button. The outer edge of the top flange is the cut-out insertion point, the expected cut-out is defined by edges.
Repeated use creates more complex millings.
Page B.11 - 9
3D Modifications
Polygonal Cut-Outs Using this command, you can cut out shapes along any freely drawn contour (poly-line). Thus, you can e.g. create notches that are not covered by the program via the special notch function. You can also subtract one shape from another to create penetrations, e.g. to obtain slotted tubes, penetrated handrail posts or others. If you have entered a value in the Gap Spacing input field of the main dialog, the cut-out is regularly extended to all directions by the indicated value to gain some “space” for inaccuracies of production. In any case, the created polygon will be extended to the top and to the bottom in the UCS Z-plane. Therefore, please pay attention that your UCS has been selected accordingly. In case of a direct use of this function via the command bar, the current settings of the main dialog apply. Click this button if you have not yet a contour in form of a polyline or circle or arc. You can enter the different points as you like, but be careful that the lines don‟t overlap in the polygon. Click this button if you have already a contour in form of a poly-line, etc. Click this button if you want to subtract the contour of another solid from the selected object (penetration or solid to be subtracted). Complete
Here, you select whether the solid to be subtracted has to penetrate the selected object completely or partially. This is not valid for solids to be subtracted.
Gap Spacing
Here, you can indicate a gap by which the cut contour is increased before the subtraction.
If you have „divided‟ a shape using this function, you will not obtain two shapes. This has to do with the volume modeller of AutoCAD. You must take care not to create two parts of a shape - e. g., by prior shape shortening. If you want to obtain two shapes, please use first the function „Divide‟ and divide the shape at a suitable point.
Page B.11 - 10
3D Modifications In the following you can see two examples for the working of polygonal cut-outs: on the left, there is a normal poly-cut and on the right, there is a milling via a solid to be subtracted.
Create a Penetration Here is still another example for creating a penetration of tubes: On the first two pictures, you see the situation in the front view and in the top view (the cutting planes are switched off so that you can see the depth. Put the selection for „Poly-Cuts‟ on Remove and click the button POLY-CUT. Now click the big tube, then one of the small tubes in order to cut out the volume, Click the big tube again and then the other small tube, in order to cut out its volume, too.
in the third picture, you see the cut-outs in the big tube (the two slanted tubes have been omitted in this representation).
Page B.11 - 11
3D Modifications
B.11.2
Modify Shapes
Shortening and Extending
Shortening Click this button to shorten a shape by picking two points. Their perpendicular distance to the center line specifies the shortening value. Click this button to shorten a shape by explicitly indicating the value. Click this button to shorten the shape by the value indicated under default. Default
Enter the value of shape shortening according to default.
In all three cases, you have to pick the shape at the end to be modified. If you pick in the middle third of the shape length, each end is shortened by half the specified value.
Page B.11 - 12
3D Modifications
Extend These functions can be used analogously to shape shortening in order to extend a shape. However, this doesn‟t work if the selected end has been modified by a cut.
Cut and Cut Out Notches This command permits a parametric notch of a shape at another shape. Another dialog appears. Since you can also select this function directly, you will find the description in one of the following chapters under the command „Notches‟.
Mitered Cut Using this command, you can combine two shapes by means of a mitered cut, which can also be carried out as 3D-cut. The bisecting line determines the cutting plane. If the height of the two shapes differs, the outer edges are not aligned. Using this command, you can also carry out a mitered cut. The intersection points of outer and inner edges determine the cutting plane here. This means that even shapes of different height are correctly cut aligned. This function cuts two shapes in a way that an arc element of the shape type picked first can be inserted with the specified radius. Radius
The radius of the arc element to be inserted; this radius can either be entered as absolute value or as many times the maximum diameter of the first shape. In this case, you enter e.g. *2.
Gap
A gap of this thickness is kept between the shapes at mitered cuts.
Page B.11 - 13
3D Modifications
Please note that a logical link is created between the parts at these cutting commands. The result will be that if one part is modified, the cut will be automatically updated. Here, you see some examples for mitered cuts, which have been created using different variants:
Modify Connections of Structural Steel Work Using the 3D-modifications, you also can modify the connections of ProSteel by means of the connection-editor. Click this button to open the corresponding dialog. You will find the description of the connection-editor in a separate chapter of this manual so that you can refer to it for more detailed information.
Page B.11 - 14
3D Modifications
B.11.3
Modify Plates
Modify Contour
Use this function to add another edge to the plate. For this purpose, you have to pick the plate at the position to be inserted. Now, a new contour point will be created at the picked position, which can be moved using the grips. Use this function to delete an edge from the plate.
Use this function to transfer the contour of a plate to other plates. This function permits to adapt the basic polygon of a plate processed by cuts to the current form. The corresponding modifications become superfluous and are deleted. If may sometimes be easier to modify the edges of a nonprocessed plate. In addition, this can be useful for data export if modifications of the contour are not supported there.
Page B.11 - 15
3D Modifications
Mitered Cut These functions permit mitered cuts between two plates. Since they are identical with those of the shapes, you can refer to this chapter for more detailed information. Gap
A gap of this thickness is kept between the plates at mitered cuts.
Chamfers and Edges These dialog pages and modification options correspond to the pages which are also available in the plate editor. Please refer to this chapter for more detailed description for processing of chamfers and edges.
Processing by Means of the Plate Editor Using the 3D-modifications, you also can modify the plates by means of the plate-editor. Click this button to open the corresponding dialog. You will find the description of the plate-editor in a separate chapter of this manual so that you can refer to it for more detailed information.
Page B.11 - 16
3D Modifications
B.11.4
Wall Processing
ProSteel permits you to create wall elements so that you can have displayed for example the neighbouring buildings of your construction as well, if need be. These functions help you for further processing the wall elements, e. g. to attach openings.
Windows/Doors Height
Height of the window or door
Width
Width of the window or door
Radius
The radius of the rounding of the upper edge of a window or door
Breast Height
Breast height of the window Click on this button to insert a window opening into an existing wall element. Click on this button to insert a door opening into an existing wall element.
Page B.11 - 17
3D Modifications
Edges Click on this button to insert an additional vertical edge into an existing wall element. Click on this button to remove a vertical edge from an existing wall element.
Specify Height Click on this button to specify the height of a vertical edge at the upper or lower side of the wall anew. Afterwards, the wall is running diagonally from the neighbouring corner points to the modified corner point.
Click on this button to specify the height of a wall segment at the upper or lower side of the wall anew. Afterwards, the wall is running diagonally from the neighbouring corner points to the two modified corner points.
Page B.11 - 18
3D Modifications
B.11.5
Additional Settings
Multiple Selection Cut at line
You can cut several parts simultaneously at one line without having to select the function once again.
Cut at Object
You can cut several parts simultaneously at another part without having to select the function once again.
Divide
You can divide several parts simultaneously without having to select the function once again.
Polycuts
You can cut an object simultaneously at several poly-lines without having to select the function once again.
Loop Cut at Lines
The command „Cut at Line‟ is repeated until it is explicitly interrupted.
Cut at Object
The command „Cut at Shape‟ is repeated until it is explicitly interrupted.
Page B.11 - 19
3D Modifications
Divide
The command „Divide Shape‟ is repeated until it is explicitly interrupted.
Connect
The command „Combine Shape‟ is repeated until it is explicitly interrupted.
Shorten
The command „Shorten Shape‟ is repeated until it is explicitly interrupted.
Lengthen
The command „Extend Shape‟ is repeated until it is explicitly interrupted.
Poly-Cuts
The command „Polygonal Cut-Outs‟ is repeated until it is explicitly interrupted.
Mitre Cut
The command „Mitred Cut‟ is repeated until it is explicitly interrupted.
Insert Corner
The command „Insert Corner‟ is repeated until it is explicitly interrupted.
Delete Corner
The command „Delete Corner‟ is repeated until it is explicitly interrupted.
Miscellaneous Close Dialog
Page B.11 - 20
The dialog is immediately closed after an action. Otherwise, you have to quit it manually, but you could at once select another command instead.
3D Modifications
B.11.6
Notch betwen two Shapes
Notches and shape cuts can be created automatically using pre-selectable distance dimensions. You may select from various variants and track your input directly in the drawing and change in “real time” if needed. All kinds of shapes (straight, bent, cranked) can be processed using this function.
Producing a Notch For this purpose, you first have to click on the shape, which has to be notched, and then the shape specifying the contour. When you select the command, the connection is created on the base of your last setting. Now you can fit the connection in the appearing dialog; you can check the result immediately in the model.
Page B.11 - 21
3D Modifications
Layout
Here, you select the shape of the cope. The different variants are shown in the picture below:
On the upper left, the initial situation before coping is shown (the shapes are still overlapping), and on the upper right you see the contour. Pictures below from left to right: Fit Shape Start (the normal cope), Fit Shape Middle and Fit Shape End. Corner Layout
Edge – The copes at the shape radii are carried out with a beveled edge. Radial – The copes at the shape radii are carried out with adapted radii. In the Radius input field, the determined radius can be modified later. Access Holes – The holes are drilled in the inner corners of the cope. In the Radius input field, the radius of the drill holes can be preset.
Inner Edge
If Not Inner Edge is activated here, the dimensions for the distance between top and bottom flange inside resp. outside refer to the outside of the flanges. If Inner Edge is activated, the dimensions refer to the inside of the flanges. If Not Inner Edge is activated here, the dimensions for the distance between top and bottom flange edge refer to the outside of the flanges. If Center is activated, the dimensions for the distance refer to the shape end (the exact position depends on the „Web Distance‟ value).
Both Sides Equal The bottom of the notch is carried out with the data of the top and the data are transferred into the fields. Exchange Sides The values of top and bottom are exchanged with each other so that you can turn the connection. Distances
Page B.11 - 22
The following dimensions can be set for upper flange and bottom flange separately:
3D Modifications
In the Radius input field, you can indicate the radius of „Drill Holes‟ or „Radial‟ option. Clicking this button allows an unknown shape to be clicked. The flange thickness is then entered in the input fields for Top and Bottom Flange Inside. If you have entered a value in the +Distance field, this value will be added. Using this function, a flange distance can be swiftly determined without knowing the shape. As reference, you should select the setting „Outer Edge‟. + Distance:
This value is added to the result in the function GET FLANGE THICKNESS. By clicking this button, you can transfer the data of the current cope directly to several copes, which have to be created anew. You have to click all shapes first which have to obtain the cope. Then you have to click the shapes to be coped.
Page B.11 - 23
3D Modifications
Standardized Notches
List
Page B.11 - 24
This List shows previously defined notches from a database. You can create these database files using any dBASE-editor you like. You can previously define a certain number of the most frequent notches. In the different List Fields you can have a look on the data, which are the base of the connection. Apart from this you can select the desired notch by clicking an entry.
3D Modifications
Notch at the End of the Shape Notch command is also available for treating the end of a shape with a notch. Just enter ESC instead of selecting a second shape and select the end of the shape where the notch has to be added. This function is also used to work on special shapes.
Notch Type
Shape End creates a simple notch at the end of the shape, US-Cope creates a complex moment-cope-notch (see below).
Edge Layout
Here the following types are available as already described above: square, drill out and round off.
Web Distance
The shape is shortened compared with its original length.
Both Sides Equal The notches are carried out equally on the top and on the bottom of the shape. Turn
The notch is rotated by 90° compared with the longitudinal axis of the shape.
Center Hole-Flange Distance from the upper / lower notch to the flange of the shape. Diameter
Diameter of the drill hole for drilling out or radius of rounding
Page B.11 - 25
3D Modifications
Center Hole-End Distance of the notch from the end of the shape without taking the web distance into consideration.
The results look as follows:
Page B.11 - 26
3D Modifications
US-Notch (Moment Cope) In California, special connections are produced which have to be earthquakeproof. Here, the joists adjoining the flange are notched. This function is also used to work on special shapes.
Different from the notches described up to now, the default settings of this notch are transformed into a poly-cut. The option for corner treatment is not available here. The result then looks as follows:
Page B.11 - 27
3D Modifications
Here the definition of the values:
Web Distance
FW
Flange Thickness
t
Angle of Intersection
A1, A2
Flange Distance
FF1, FF2
Center Hole-Flange
CT1, CT2
Diameter
D1, D2
Hole Center
FCL1, FCL2
Center Hole-End
B1, B2
Other results of treatment with special shapes would be possible as well:
Page B.11 - 28
3D Modifications
B.11.7
Boolean Operations
For volume modelling, ProSteel does not use the AutoCAD volume modeller ACIS but the modeller which is used in Architectural Desktop as well. This modeller works faster and produces smaller graph files. Consequently, you cannot process ProSteel objects with the Boolean operations of AutoCAD (e.g. subtract their volumes). In case you do combine objects, there will be no errors, but nothing will happen! In order to give you the same performance range as with AutoCAD, all Boolean operations were redefined (see also the command ‟Basic Solids‟). Another option is to use the ProSteel properties to convert the ProSteel objects into ACIS volume models and then to process them with AutoCAD. Your drawings will then become larger and more sluggish.
Add
PS_ADD This command creates a new volume by adding two existing volumes. You have to click both objects and the newly created object receives all parts list information of the object you clicked on first.
Subtract
PS_SUB This command creates a new volume by subtracting one or several volumes from an existing volume. First, you have to click the object from which the other volumes are to be subtracted. Then click the objects whose volume is to be subtracted (these will be deleted in the process!). The new object receives all parts list information of the object you clicked on first. Please note, that you will not create two independent objects in case you “split” the first object in the process.
Page B.11 - 29
3D Modifications
Cut-Set
PS_COMMON This command creates a new volume by using the cut-set of two existing volumes, i. e., the new volume is the part the two objects shared. You have to click both objects and the new object will receive all parts list information of the object you clicked on first.
Schnittmenge abziehen
PS_COMMON_SUB
Diese Funktion erzeugt ein neues Volumen durch Abziehen der Schnittmenge zweier vorhandener Volumina vom ersten Volumen. Es findet also ein Anpassen des ersten Teiles an das zweite Teil statt, wobei das zweite Teil aber erhalten bleibt.
Page B.11 - 30
Plate Editor
B.12 Plate Editor
A special plate editor is available for processing of plates. This editor allows for modifying the contour by adding or separating poly-lines in a fast and comfortable way. You may see the poly-line as a plate of the same thickness and position like the plate to be processed. In addition, you can add chamfers and edges. All commands can also be carried out via the normal manipulation. The use of the plate editor is recommended when poly-plates have to be processed in complex situations because it can hide the other component parts and it automatically enters the plate level. When loading the function, click the plate to be modified first. Then a dialog appears where you can enter further indications with regard to the desired processing.
Page B.12 - 1
Plate Editor
B.12.1
Boolean Operations
Boolean Opera… Here, you specify what kind of processing has to be carried out: either Add, Subtract or Common. Side
Select from which side of the plate the processing has to be carried out.
Contour
You can use a polygon either as complete solid or as contour line. Please pay attention that the poly-line has to be closed, even if it is used as contour.
Distance
If the poly-line has to be used as complete contour, you can enter an offset towards the contour.
Milling Width
If the poly-line has to be used as milling contour, you can enter the width of the contour here.
Depth
Here, you enter the depth of processing if the poly-line is not used completely continuous.
Hide Parts
If this option is activated, all other component parts are hidden at plate selection. This is valid from the next selection onward.
Continued
The poly-line is used as solid with the plate thickness, i.e. continuous.
Page B.12 - 2
Plate Editor
Click this button to determine the contour via the different contour points.
Click this button to determine the contour by picking a polyline, a circle or an arc.
Click this button to add another edge to the plate.
Click this button to delete an edge from the plate.
Example for different Boolean Operations
Example for different contours
Page B.12 - 3
Plate Editor
B.12.2
Chamfer / Rounding Off
Chamfer Use this button to select the corresponding corner of the plate if you want to add a chamfer to a plate. Then, the input fields are released. Layout
Here, you select which kind of chamfer has to be carried out: straight, convex or concave.
Radius/1st. Edge Here, you indicate the radius at convex/concave version or the length of the first edge at straight version. 2nd. Edge
Here, you indicate the length of the second edge of the straight chamfer.
Example for a plate with all possible three chamfer types
Page B.12 - 4
Plate Editor
Rounding Off Use this button to select the corresponding plate edge to round off an edge. Then, the input fields are released. You can define the rounding off either via the radius or via the height of the rounding above the straight edge. Radius
Specify the rounding radius.
Min. Radius
Here, the program shows you the minimum radius that is possible.
Height
Specify the height above the straight edge.
Max. Height
Here, the program shows you the maximum height that is possible.
Example for a plate with rounded off edge before and after the rounding off has been effected
Page B.12 - 5
Plate Editor
B.12.3
Edge Processing
This function serves for processing of one or more edges. The edges can be chamfered, rounded off, been equipped with a radius or seamed.
Use this button to select the corresponding plate edge to process an edge. Then, the input fields are released. Layout
specifies the kind of processing. six different kinds of edge processing are available for selection.
Top Side
The selected processing is made at the upper side of the plate.
Bottom Side
The selected processing is made at the lower side of the plate.
Page B.12 - 6
Plate Editor
The following parameters are valid both for top and bottom side of the plate. Var1
This value is either the length of the first edge, the rounding radius or the depth of the seam.
Var2
This value is either the length of the second edge or the height of the seam.
Selected Edge
Here, you indicate from which edge to which edge the processing has to be made. When you click the edge and the side is switched on, the edges are displayed in a numbered way. You can select the processing area. If the starting value is equal to the end value, the processing will be carried out all around.
Select e. g. 0-1, 2-3 for the edges to be processed, when you want to process the two opposite sides.
Page B.12 - 7
Plate Editor
Page B.12 - 8
Drilling / Bolted Connections
B.13 Drilling / Bolted Connections Shapes and plates can be provided with different drill holes. Existing drill holes of a shape can be transferred to another shape, and oblong holes, countersunk holes or step borings can be created as well. Now, it is also possible to create thread holes. In addition, you can use this command to bolt component parts directly without having to generate drill holes first. Then, you can carry out the „Bolt‟ command. The distribution of bolts is indicated in the same way as for drill holes but the bolts automatically create the necessary drill holes in all participating component parts. The program manages drill holes in the form of Drill Hole Fields. This means that groups consisting, for instance, of 2 x 2 holes will be drilled in one operation. In the dialog box you enter the individual hole pitches and then insert the complete hole group. The drilling depth is always along the Z-axis of the active UCS plane. A description of the drill hole field is given in the xy plane of the active UCS. Although it would be possible to drill holes in the general overview (global view), it is easier to work in one of the views. After selection of the command, a dialog box appears where you can set the basic behaviour of the command and other default parameters. Depending on the selection, the displayed content may differ.
Page B.13 - 1
Drilling / Bolted Connections
B.13.1
Layout
Drill Holes / Drill Hole Fields
Select the general form of the drill hole field here. Rectangular – In a rectangular drill hole field, the drill holes are arranged in a rectangular way around the insertion point forming rows and columns. Radial – In a radial drill hole field, the drill holes are arranged in a complete or partial circle around the insertion point. Additional input fields are displayed allowing you to define round drill hole fields. Single Holes – The position of each single hole can be determined individually.
Rectangular Drill Hole Field Definition
In general, drill hole fields are described as follows: Number1*Pitch1, Intermediate Pitch1, Number2*Pitch2, Intermediate Pitch2,...
Shape/X Dir
Description of drill hole field in shape direction, for plates in xdirection of the UCS.
Cross/Y Dir
Description of drill hole field perpendicular to the shape direction, for plates in y-direction of the UCS. Rectangular drill hole fields are described by indicating number*pitch of the drill holes and any existing Intermediate pitches (separated by a comma). At a number = 1 you can omit the pitch.
Page B.13 - 2
Drilling / Bolted Connections
Radial Drill Hole Field Number
Number of drill holes
Radius
The radius of the circle where the drill holes are arranged around the insertion point
Area
The angle area throughout which the drill holes are distributed.
Start
The starting angle from which on the drill holes are distributed.
Further Default Parameters Diameter
The bolt diameter is specified. It is taken from a list that can be edited, as you like. This list is stored in the directory.. \prg under pro_st3d.hdr. If you activate the option for individual diameter input in the global settings, you can also enter values not included in the list.
Addition
If you don‟t insert any thread hole, you can enter here the clearance between bolt diameter and hole diameter. In the above list, you can also define a Workloose for the bolt diameters. However, you have to activate the use in the Global Settings / Bolts. You can enter any value here.
Rectangle Hole Axis If rectangle holes have to be inserted, you enter the length of the rectangle hole axis here. Layout
Drill Through –Drill holes are created from one material edge to the other. Drill Blind Hole – The holes have only a certain length. Weld Crack – This is a small marking.
Depth
Specify the depth of the drill hole for the layout „Drill Blind Hole.
Flange
Indicates the flange to be drilled. You may either drill holes into the upper or lower flange or into both flanges. Upper/Lower flange results from the position of the component part and from the current z-axis.
Shape Centre
The insertion point is perpendicular to the shape centre before use. Thus you will always obtain symmetrical drill holes related to the shape centre.
Page B.13 - 3
Drilling / Bolted Connections
Creation of Drill Holes Click this button to insert drill holes into a component part. Select a part, which is then drilled accordingly.
Click this button to insert drill holes into several component parts simultaneously. You can select several parts at the same time; alignment is made according to the first picked part. Click this button to adopt the drill holes of one component part into another one. First click all shapes with holes to be transferred and then all shapes to adopt the hole. Using this function, drill holes from a copied connecting plate may be rapidly transferred to a shape. This option is only available if you didn‟t select the option „Bolted Connection‟. If you keep the Shift-key pressed at component part selection, you can select a XRef component part.
You can also adopt a drill hole field with simultaneous bolted connection into a new shape so that the new shape is drilled first and then bolted. First select the properties of the shape and click on the EDIT button in the “Drill Holes” tab. The drill hole dialog described here will be displayed and you can adopt the drill holes with bolts using „Bolts/Add‟. Monitor
Page B.13 - 4
Here you can see the creation of the drill hole field and define the insertion point.
Drilling / Bolted Connections
Rectangular Drill Hole Fields The drill hole field is always entered in shape direction (from starting point to end point of insertion). The developing drill hole field is directly displayed among other things in the shape field of the “Insertion Position” tab of the dialog for control purposes.
This hole group is entered in the drill hole description as follows: Input field „shape / X Dir‟ Input field „cross / Y Dir‟
2*60,200,1*,200,3*40 2*100
If you only want to insert a hole group with single holes in longitudinal direction, just leave the box for crosswise direction empty.
If you want to insert a hole group in the crosswise direction only, you have to enter 1* in longitudinal direction in any case (for one hole).
One single drill hole field cannot cover mixed groups consisting of one and two holes in crosswise direction!
You can enter the predefined marking gauges of the shape by typing the letter W instead of a pitch, e.g. 2*W. If no specific marking gauge has been defined for the current shape, the program will prompt you to enter one.
Page B.13 - 5
Drilling / Bolted Connections
B.13.2
Bolted Connections
Alternatively to drilling option, you can directly add a bolted connection to the component parts. For this purpose, you have to select at least 2 component parts the distance of which is not bigger than specified in the gap input field. All settings with regard to drill hole field, diameter, etc. are made on the first page.
Bolt Style
Select the desired bolt style here.
Gap
Maximum distance of one contact surface to the other; if the distance is bigger, no bolted connection will be created
Length Addition Length addition for the bolts Touch Plane
Page B.13 - 6
Normally, drill holes are created along the z-axis of the current UCS. At bolted connection option, however, the program can be prompted to search for contact surfaces. Normally, these are the surfaces where a bolted connection is inserted. For this purpose, the UCS doesn‟t have to be placed normally on these surfaces.
Drilling / Bolted Connections
In this example, the plate can be bolted to the shape although the UCS is not aligned normally to the drill hole direction. Single Hole Bolt The insertion of bolts into a part is allowed as well. Turn
The bolts are turned before insertion.
Update auto
The connection is automatically updated if a component part has been modified. A logical link is created between the participating component parts.
Creation of Bolted Connections Click this button to bolt several component parts with each other. Now, you are prompted by ProSteel to select the participating component parts and then to indicate the insertion point of the bolted connection (similar to a normal drill hole). Then, the bolts are automatically inserted and the necessary drill holes are created. You don‟t have to specify in which flanges this has to be done because this is automatically determined by ProSteel. Please note that the element, which was selected, first represents the main element of the connection. All others are only bolted elements. If you want to modify the bolted connection at a later time, you have to modify the properties of this main element. Since the drill hole fields of the bolted elements depend on the drill hole field of the main element, these cannot be modified independently. Please remember as well that the bolts are not assigned to a group. This assignment has to be made later using the command „Group‟ if desired. Click this button to edit the bolt style. Click this button to add new component parts to the bolted connection. Necessary drill holes are automatically generated. Click this button to remove component parts from the bolted connection. Drill holes are automatically removed as well.
Page B.13 - 7
Drilling / Bolted Connections
B.13.3
Additional Settings
Hole Type
Here, you specify the kind of bolt to be inserted.
Normal Drill
The drill hole has one diameter at each position.
Countersunk
The hole is drilled as countersunk hole. In this case, you can set the countersunk Depth and the opening Angle.
Step Hole
The hole is drilled as step hole. You can determine the Depth of the step and the upper diameter additionally. The figure below shows you all three available layouts one beside the other.
Page B.13 - 8
Drilling / Bolted Connections
Hole Type
This setting influences the later 2D-depiction.
Offset
You can influence the insertion point of the drill hole using an offset related to the selected insertion point.
Rectangular
In this case you can enter the offset separately for x, y.
Polar
In this case you can enter the offset by means of distance and angle related to the insertion axis. In the case of shapes, the insertion axis is the longitudinal axis instead of the x-axis.
Shape Centre
The insertion point is perpendicular to the shape centre before use. Thus you will always obtain symmetrical drill holes related to the shape centre.
Pitch Lines
During drilling, the crack lines of the participating shapes are displayed. After end of drilling they disappear again.
Centre Lines
During drilling, the centre lines of the participating shapes are displayed. After end of drilling they disappear again.
Ignore Inner...
If this field is checked, the drill hole is not interrupted at concave chambers, which occur due to inner contours. Thus, it is possible to drill through a square tube completely. Otherwise, only one side would be drilled.
Create Thread
The drill hole is executed as thread hole. No Workloose is used and the drill hole is correctly displayed as thread hole in 2D depiction. In 3D depiction, additional lines are displayed to make the thread hole visible.
Page B.13 - 9
Drilling / Bolted Connections
B.13.4
Edge Distances
ProSteel can automatically verify the admissible edge distance during drilling of component parts. It is also possible to carry out this control manually for certain parts. If an automatic control has to take place, which is activated directly during drilling, you have to switch on the corresponding option in the global settings. You can specify the admissible edge distances of shapes and plates for each hole diameter in a table. The corresponding drill hole then will be verified by means of this table and the part will be marked in colour if the distance is too small. If the automatic control is activated, an info window appears during drilling. However, the drilling will be realized nevertheless.
In this table, you can assign the corresponding minimum distances for any existing drill hole diameter, separated according to shapes and plates. Click this button to start controlling the edge distances. You are prompted to select the parts. If the drill hole distances of a part are smaller than the selected distances, this part will be highlighted in colour. You can remove this marking using the command PS_REGEN. If you suppress any further display during automatic control, any existing smaller distances will not be displayed any more. This button serves for removing the lock of the display. If you have activated the „Expert‟ mode in the global settings, this button will be additionally displayed. It permits editing of the diameter table.
Page B.13 - 10
Drilling / Bolted Connections
Editing the Table After double-clicking on a line, an input dialog appears where you can define the values:
Dia.
The corresponding diameter
Shapes
The specified edge distance for shapes
Plates
The specified edge distance for plates
When you quit this dialog with OK, the indicated values are adopted into the table and this list is sorted anew according to the available diameters.
Automatic Control If the automatic control of the edge distances has been activated and the program detects smaller edge distances during an operation, a warning message will be displayed. However, this warning is only a hint; the corresponding drill hole will nevertheless be inserted into the component part. Please note that this message might not appear before end of the action.
Page B.13 - 11
Drilling / Bolted Connections
Page B.13 - 12
Bolts
B.14 Bolts Bolting of component parts is the easiest form of automatic connections provided by ProSteel. In previous versions, the components to be bolted had to be drilled first.which now is not necessary any more. Of course, it is still possible to continue working with the existing combination of drilling/bolting. Another option is the creation of user-defined bolt styles as well as the check and update of the bolting via logical links (please refer to ->'Logical Links'). In some connection dialogs, a lot of settings are not necessary and you can set the bolts exactly according to your requirements. After all component parts, to be bolted with each other are selected, the program checks the position of the parts with regard to possible bolting (if need be, with regard to drillings which are situated one above the other and having an allowable tolerance; but it does not check possible mounting). Necessary bolt lengths are calculated and the bolts are inserted according to your default settings with regard to type and possible washers. Then, the bolts are adopted into a bolt list for later parts list.
Changes to older versions 16.xx From version 17 onwards, ProSteel is able to adopt existing bolts and component parts in a new connection/bolting (back to back bolting). This permits e.g. to bolt automatically 2 web angle connections which are connected on the left and on the right of a girder and this bolting is designed completely and correctly. This process is running completely in the background; the only prerequisite is that bolts and connection parts are connected with each other via logical links. As an option, this process may be switched off in Global Settings/Bolts because it possibly requires a considerable amount of calculation time. Bolt management is still effected via styles, which may be created by the user. There is however one important modification: the necessary data from which the bolts are generated are not summed up any more but they have been divided into the corresponding components. This allows you to put together the components of a bolting completely; and length calculation is designed on the basis of the selected component parts. The result is considerably more flexible and bolt definitions more accurate.
Page B.14 - 1
Bolts
B.14.1
Bolting parts
The components are bolted automatically after part selection and selection of the bolt style. The holes in the component parts are analysed and the corresponding bolts are selected and inserted. After having loaded the function, you will get the following screen display:
Bolt style
Here you select the bolt style to be used.
Single hole Bolting Normally, at least 2 component parts are required for a bolting. Sometimes you only want to insert bolts without bolting them. This option creates bolts for each hole of the selected component parts without requiring a second part. Create dynamic Connection The selected component parts are connected with each other via logical links. The bolting is automatically updated in case of modification. Diameter
Indicates the virtual hole diameter if you want to create a single bolt manually. This process was chosen to preserve the compatibility with standard bolting function.
Work loose
Indicates the virtual free play if manual insertion has been selected.
Page B.14 - 2
Bolts
Length Addition Indicates the value by which the bolts are extended. This is valid for all kinds of insertion. Gap distance
Indicates the maximum distance between two holes which are assumed to belong to the bolting. If this value is exceeded the holes cannot be bolted.
Angle difference This is the difference of the angles of the drilled holes in degrees. If this value is exceeded, the holes don't align and cannot be bolted. Colours
bolt= indicates the colour of the bolt on the monitor, monitor= indicates the colour of monitor background. This button allows bolting of component parts. Select the desired parts and the bolts will be inserted into these component parts according to the existing holes. This button allows bolting of component parts. Select the desired parts as well as the area of bolting and the bolts will be inserted into these component parts according to the existing holes. This option permits manual insertion of a bolt. Select start and endpoint of grip length and the bolt will be inserted. This button permits to attach a single nut and/or disk without the corresponding bolt. To do so, pick the insertion point of the nut or washer and then the direction of the bolt head (where it would normally be). To attach a nut and/or washer directly at a round bar steel, first press the ESC-key, and then click the round bar steel at the desired end. This button allows rotation of one or several bolts. Select the corresponding bolts and they will be rotated. This button allows new weight calculation of the selected bolts on the base of their volume.
Page B.14 - 3
Bolts
B.14.2
Bolt Style Management
The second page permits the manipulation of bolt styles.
Bolt Style
Here, user selects the bolt style, which is to be modified. This button opens the dialog for bolt definition.
2
nd
Washer
Activate this option if your style definition is to be equipped nd with a 2 washer. This button opens the dialog for definition of the 2 is only available if this option has been activated.
2
nd
nd
washer. It
Tapered Washer Activate this option if your style definition is to be nd equipped with a 2 wedge washer. nd
This button opens the dialog for definition of the 2 wedge washer. It is only available if this option has been activated.
Page B.14 - 4
Bolts Tapered washer Activate this option if your style definition is to be equipped nd with a 2 wedge washer. This button opens the dialog for definition of the wedge washer. It is only available if this option has been activated.
Washer
Activate this option if your style definition is to be equipped with a washer beneath the nut. This button opens the dialog for definition of the washer. It is only available if this option has been activated.
Nut
Activate this option if your style definition is to be equipped with a nut. This button opens the dialog for definition of the nut. It is only available if this option has been activated.
Safety nut
Activate this option if your style definition is to be equipped with a safety nut. This button opens the dialog for definition of the safety nut. It is only available if this option has been activated.
The current definition is stored in the drawing and in a file. If the style is modified and you leave this page without having saved the modifications, you are asked whether you want to save. Permits loading of the current style definition from a style file. All current definitions of the current style will be overwritten.
Page B.14 - 5
Bolts
Bolt Definition When the button for bolt definition is pressed, the following dialog opens:
Style name
Indicates the current style
Data file
Indicates which data file is used for bolts with this style. Only bolt files are displayed.
Parts list entry
Here you specify the entry of the bolt, which is to be written into the parts list and position flag. Two variables may be used: $(D) stands for bolt diameter and $(L) stands for bolt length. In addition, the following two variables are possible: $(GLM) for min grip length and $(GLX) for max grip length.
Export name
This name is used for data export. The above-mentioned conditions are valid as well.
Material
Here the bolt material is selected. Only those materials are listed which have been defined as bolt materials.
Tension
Enter the tension as a percentage.
Page B.14 - 6
Bolts
Length Addition Enter the additional length of the bolts. The bolt will be extended by this value after length calculation. Layout
Specify whether the bolt has to be a shop bolt or an assembly bolt. This specification has influences on the parts list. When an assembly list is created, only assembly bolts will be taken into consideration.
Units
Specify the units the data file is based on.
Coating
Select the coating of the bolt.
Colour
Select the colour of the bolt in the model.
Bitmap
You may select a bitmap that is used in the selection lists of this style. Click on this button to open the AutoCAD-dialog for colour selection. When you have clicked on the corresponding input field before, you can comfortably select the colour. Click on this button to open the file selection dialog and you can select the bitmap for the bolt style.
Countersunk head The bolt is displayed as countersunk bolt. Parts list entry
The bolt is adopted into the parts list.
Inner Hexagon
The bolt is executed as inner hexagon.
No DM Check
For this bolt, a diameter check will not be carried out. Normally, all entered diameters which are found will be reduced to standard values. Thus e.g. a bolt with bolt diameter DM=12.5mm cannot be created.
Individual Mounting Space The bolt has a standard mounting space or the bolt style has an individual mounting space. Upper Area
Enter the width of the mounting space at the bolt head either as absolute value, i.e. as many times the amount of the diameter via *xx or as addition to the diameter via +xx. Enter the length of the mounting space at the bolt head either as absolute value, i.e. as many times the amount of the length via *xx or as addition to the length via +xx.
Page B.14 - 7
Bolts
Lower Area
Page B.14 - 8
Enter the width of the mounting space at the bolt base either as absolute value, i.e. as many times the amount of the diameter via *xx or as addition to the diameter via +xx. Enter the length of the mounting space at the bolt base either as absolute value, i.e. as many times the amount of the nut height via *xx or as addition to the nut height via +xx.
Bolts
Nut Definition
Data file
Indicates which data files are used for nuts with this style. Only nut files are displayed.
Partlist entry
Here you specify the entry of the nut, which is to be written into the parts list and position flag. Two variables may be used. $(D) stands for bolt diameter, $(L) stands for bolt length.
Export name
This name is used for data export. The above-mentioned conditions are valid as well.
Material
Here the nut material is selected. Only those materials are listed which have been defined as bolt materials.
Partlist Entry
The nut is adopted into the parts list.
Definition of safety nuts takes place analogously.
Page B.14 - 9
Bolts
Washer Definition
Data file
Indicates which data files are used for washers with this style. Only washer files are displayed.
Parts list entry
Here you specify the entry of the washer, which is to be written into the parts list and position flag. Two variables may be used. $(D) stands for bolt diameter, $(L) stands for bolt length.
Export name
This name is used for data export. The above-mentioned conditions are valid as well.
Material
Here the washer material is selected. Only those materials are listed which have been defined as bolt materials.
Partlist entry
The washer is adopted into the parts list.
Page B.14 - 10
Bolts
Wedge Washer Definition
Data file
Indicates which data files are used for washers with this style. Only washer files are displayed.
Parts Entry U-washer This definition is used in case U-shapes are applied. The same is valid for I-washers. Here, you specify the entry of the washer, which has to be written into the parts list and position flag. Two variables may be used. $(D) stands for bolt diameter, $(L) stands for bolt length. Export name
this name is used for data export. The above-mentioned conditions are valid as well.
Material
Here, the washer material is selected. Only those materials are listed which have been defined as bolt material.
Partlist entry
The washer is adopted into the parts list.
Replace standard washer The standard washer is also executed as wedge washer for this definition.
Page B.14 - 11
Bolts
Insertion of Threaded Rods On this page, you can define threaded rods and insert them into the model.
Bolt Style
Use the indicated style to define the thread of the threaded rod.
Diameter
Indicates the diameter of the threaded rod.
End Offset
Indicates the end offset of the threaded rod.
Round to
Rounds the overall length of the threaded rod to the indicated value. The threaded rod is inserted into the model by using 2 points.
Page B.14 - 12
Bolts
B.14.3
Sort
This dialog page serves for management of bolt style selection lists and for creation of new bolt styles.
Serves for creation of new bolt styles. After selection, you are asked for the name of the new style. Then, the style is created and is equipped with the settings of the current style. Allows loading of a style from the file. The style is inserted at the current position. The currently checked style is deleted without further query.
The currently checked style is moved upwards in the list.
The currently checked style is moved downwards in the list.
All style definitions stored in your corresponding files will be updated. The styles are stored as objects in the drawing. When the style definition is modified on the hard disk, normally the modifications are not transferred to the internal objects. They are carried out for all styles by this function.
Page B.14 - 13
Bolts
Page B.14 - 14
Insert Stiffeners
B.15 Insert Stiffeners ProSteel offers an automatic command for the insertion of a stiffener into a shape. Although stiffeners are common poly-plates or flats, the program already calculates their dimensions according to the shape and user specifications. You may select from a number of variables and track the result immediately in the drawing, modifying it in “real time”. In the case of symmetric shapes such as HEA, HEB, etc., two opposite stiffeners are created between the web and the two flanges. When only one stiffener is needed for the structure, just delete the other one. However, it will not be restored during an update.
Insertion of Stiffeners You can insert stiffeners either in views or in the global view. When you have selected normal stiffeners (i.e. stiffeners running vertically to the shape axis), you are prompted to specify the shape where the stiffeners are to be inserted. After selection, the program prompts you to specify the center of the insertion point of the stiffeners. Click the point you want on the shape or on a construction line. Your pick point is generally placed perpendicular to the shape axis. When you have selected „Full Stiffener‟, the stiffener is inserted to fit. When you have selected „Half Stiffener‟ or „To Measure‟, you are prompted to specify the fastening side of the stiffeners. Click the flange side with which the stiffeners are to be in contact. Let‟s assume that you have drawn the construction lines on the upper flange in the top view as shown on the left. If you click the line at any point, the pick point is always positioned perpendicular to the axis and used as the insertion point of the stiffeners.
Page B.15 - 1
Insert Stiffeners
Dimensions
Layout
Here you select the shape of the inner corners of the stiffeners.
Use Flat..
A flat steel is used instead of a poly-plate. The flat is processed by Boolean operations in a way as if its shape would be identical with a poly-plate.
Search Closest Flat The current polyplate is replaced by the closest fitting flat steel. No user-specific flat steel is created. Length
Here, you specify the length of the stiffeners.
Full Stiffener
The stiffener height extends over the complete web height of the shape.
Half Stiffener
The stiffener height stretches over half the web height of the shape where the side is determined by the picked side.
By Length
The stiffener is given the height specified by you. Only values between 10-90% of the web height can be used.
Page B.15 - 2
Insert Stiffeners
Square
The height of the stiffener is determined according to the specifications, but the layout is a triangle shape.
Thickness
Thickness of the stiffener plate; this value is taken from the table or it can be entered freely if this setting has been activated.
Flange Offset
When calculating the stiffener dimensions, this is the distance to the flange side, i.e., the stiffener height is slightly reduced.
Web Distance
When calculating the stiffener dimensions, this is the distance to the web side, i.e., the stiffener width is slightly reduced.
Length
This is the value for the stiffener length when you have selected the stiffener length „To Measure‟.
Offset
When calculating the stiffener dimensions, this is the distance to the outer edge of the flanges, i.e., the stiffener width is slightly reduced. If the stiffener is to slightly project towards the outside, type a negative value.
Round to
The Round to value describes a rounding accuracy applicable to the width of the calculated stiffened plate. Rounding is carried out after calculation of the projection. Using this command, it is possible, e.g., to permit only dimensions divisible by 5, so that flat steel bars can be used.
Radius
In the Radius input field you specify the radius of the ribbed plate at the shape radii. If this value is 0, the shape radius is imported. If you have selected the create „Insert at Slant‟, the radius is bridged by a slanted edge. Click this button to move the stiffener with respect to the insertion point. After insertion, the stiffener first is placed in the middle of the insertion point. However, you can also align it to the upper or lower edge of the stiffener by clicking repeatedly on it.
Page B.15 - 3
Insert Stiffeners
Connect On this page you specify the weld style in the case the stiffeners have to be welded directly. You can also attach weld cracks to mark the stiffeners in the shape.
Weld Style
Specify the weld style to be used.
Flange Side
The flange side of the stiffeners will be welded.
Thickness
If you want to overwrite the thickness of the selected style, you may do this here.
Web Side
The web side of the stiffeners will be welded.
Thickness
If you want to overwrite the thickness of the selected style, you may do this here.
Weld Mark
Here, you specify whether small drill holes serving as weld marks have to be inserted into the shape after insertion of the stiffeners. These weld marks then can be output in the workshop drawings or in the NC-data. None – No marks are fixed. At Center - A mark is fixed at the center of the stiffener. At Edges - A mark is fixed at each of the outer edges of the stiffener.
Page B.15 - 4
Insert Stiffeners
Create Group
If this field is checked, the stiffeners and the shape are arranged to create a group. If the shape is already part of another group, the stiffeners are allocated to that other group.
Options
Angle insertion
If this field is checked, stiffeners can be inserted in the shape using a slant. At insertion, you are prompted for a line specifying the direction. The necessary extension of the stiffener width is automatically calculated.
Page B.15 - 5
Insert Stiffeners
Angle
Here you can enter the position angle related to the centerline.
2D-Section
If this field is checked, an automatic 2D section is inserted directly at the stiffener. This section can be displayed during detailing. The cutting plane is situated slightly in front of the stiffener and it ends slightly behind the stiffener; the cutting direction is always in shape direction.
Assignments As it is the case with each dialog creating component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Oblique Stiffeners In principle, the insertion of oblique stiffeners is the same as described above, except for the fact that you are prompted to define a position line of the stiffeners. Click a (construction) line showing the orientation of the stiffeners. Now, the stiffeners are inserted into the shape in an oblique position. The distances refer to the outer corners of the stiffener plates. If you select the command via “PS_RIP_ANGLE”, you will be prompted for the position line right during input and can then click it. Show the center line of the shape in the top view and use the „virtual point of intersection without Z‟, in order to get an exact center point of insertion using the „point of intersection‟ of the axis and the construction line.
Page B.15 - 6
Plate Connections
B.16 Plate Connections ProSteel automatically creates any plate connections such as stiff or rigid plates according to DAST (ocal standard), jointed plates, etc. but also completely freely definable connections. The program determines the type of possible connections based on the shapes to be connected and offers these to the user as well. In addition to the actual connection plate other components such as stiffeners, backer plates, bolts and even reinforcement haunches can be created with this command and assigned to the proper component groups directly. An entire plate connection can be created with just one single command. Hint: All possible plate connections are now contained in this shared dialog and, e.g., you can specify a stiff connection first and subsequently process this connection the same way you would a free plate.
Creating Plate Connections When selecting the plate connection command you are first prompted for the shape to be connected, which you have to click at the end to be connected. Then you have to click the supporting shape (the shape to which you want to connect) or you have to ignore it with RETURN. No supporting shape is considered when pressing RETURN or the right mouse button and you can create a simple end plate at the shape to be connected. No further action on your part is required because the program does the rest for you. The shape to be connected is cut to the proper length and is fitted with the connection plate. The plate and supporting shape are drilled and bolted together and – depending on your selection – the additional components for the stiffeners are attached. Then you will see a plate connection with the default values of the last connection created with this function followed by the display of the dialog for the parameter settings. If you want to create e.g. a plate resistant to deflection instead, just switch to the dialog tab for plates resistant to deflection and select the desired plate. On screen, the connection changes immediately to display the current settings. Switch back to the layout tab to see the current dimensions, which can be dynamically adjusted.
Page B.16 - 1
Plate Connections
B.16.1
Free Plate Connections
Layout and Dimensions This dialog opens when selecting the command after the shapes to be connected have been picked. You can enter the dimensions of any freely defined plate connection. This dialog tab is also the basic dialog of the other plate dialogs. Any selection from such objects as e.g. the plates resistant to deflection can still be changed here because any of the parameters on which the connection is based is entered and imported in this dialog from where they can be modified further at any time.
Layout of Plate
Page B.16 - 2
Specify the layout of the connecting plate. The following figure displays different connection types, which can be created.
Plate Connections
If you selected the „Automatic‟ option, the program decides which type to be used depending on the position of the shapes. The critical angle, which differentiates between, spliced and standard plate connection is approximately 45°. If you want to obtain the „Flange‟ type, you have to set this option explicitly because otherwise always a plate connection at the web will be created.
Group Dimensions Width
means the width of the plate (in case of I shapes: parallel to the shape flange).
Thickness
means the thickness of the plate.
Length
means a fixed length of the plate independent of the shape height. Entering the value 0 for the length, you can enter the plate length variably in the Offset Top and Offset Bottom fields as distance from the upper and lower edge of the selected shape.
Gap
means that an indicated space is left between the supporting shape and the plate. This allows you to consider e.g. finishing tolerances.
Offset Top
means the distance from the upper shape edge. Positive values reduce the plate dimensions towards the middle. Negative values increase the plate dimensions beyond the shape.
Offset
means the distance from the lower shape edge. Positive values reduce the plate dimensions towards the middle. Negative values increase the plate dimensions beyond the shape.
Doubler Plate
Here, you can create a second plate with different dimensions than the first one. The input fields for the dimensions of the second plate are released after the option has been clicked.
As Poly-Plate
The inserted end plates are not created as flats but as polyplate.
Rotate Connection In case of asymmetric plates you can define the plate position here. Use this option to turn the complete connection by 180° around the insertion axis, if upper and lower side were exchanged at generation of the connection.
Page B.16 - 3
Plate Connections
Equal Plates
If you want to insert two identical plates, you have to activate the option Double Plate and set the option Equal Plates. Now the dimensions of the second plate are the same as for the first one and two identical plates are inserted. Click this button to adjust the first plate to the cross-section of any existing shape. Click this button to copy the data of the first plate into the input fields of the second plate.
Gap
Indicates the width of the gap between supporting shape and plate.
Plate Offset
Horizontal means that the complete plate connection is shifted parallel to the flange of the connecting shape. Vertical means that the complete plate connection is shifted parallel to the web of the connecting shape.
Direct Call of Plate Functions The different default types can be called directly as well. If you have selected the connection type „Splice‟, you can define a separation line for a continuous shape by pressing RETURN or the right mouse button when you are prompted for the supporting shape.
Normal:
PS_ENDPLATE_NORM
As Splice:
PS_ENDPLATE_SPLICE
At Flange:
PS_ENDPLATE_FLANGE
Page B.16 - 4
Plate Connections
Drill Holes Without Holes
The connection plate is created without drill holes.
Group Vertical The drill hole spacing in a vertical direction (height) is determined. Depending on the entry, the values have different meanings. Examples are given at the end of the command description. Upside
Here, you enter the distance of the upper row of holes from the plate‟s upper edge. If this value is 0, and the value in the box Downside is also 0, the only entry that will be used is in the Middle field.
Middle
Here, you enter the distance of the first and second row of holes from the upper and lower plate edge. The holes will be distributed uniformly between the two outer holes if this value is 0. The other rows of holes will be arranged in the same manner if the number is greater than 4.
Downside
Here, you enter the distance of the lowest row of holes from the plate‟s lower edge. If this value is 0, and the value in the box Upside is also 0, the only entry that will be used is in the Middle field.
Page B.16 - 5
Plate Connections
Offset
Here, you enter a simultaneous shifting of all rows of holes with respect to the plate upper edge. If you enter a negative value, shifting will be carried out with respect to the plate lower edge.
Asymmetrical
If you have selected this option, the structure of the hole pattern input changes and a list with an input field appears. Depending on the number of holes, you can determine each distance individually by clicking the position in the list and by specifying the distance in the input field.
Measured from
Here you can specify at asymmetrical distribution from which position the distribution of drill holes starts.
Group Horizontal The drill hole spacing in a horizontal direction (width) is defined here. Examples are given at the end of the command description. Left
Here, you enter the distance between the outer left row of holes and the central left row of holes, if the number of rows is 4.
Middle
Here, you enter the distance between the two inner rows of holes. The rows of holes are generally arranged centrally, unless they are offset by an entry in the Offset field.
Right
Here, you enter the distance between the outer right row of holes and the central right row of holes, if the number of rows is 4.
Offset
Here, you enter a simultaneous shifting of all rows of holes with respect to the right plate edge. If you enter a negative value, shifting will be carried out with respect to the left plate edge.
Page B.16 - 6
Plate Connections
Connect
Bolt Settings Bolt style
You can select the type of bolts (e.g., DIN 6914) to be used for the connection using this list.
Dia
Here, you specify the bolt diameter for the connection.
Workloose
Here, you enter the required clearance of the bolted connection, in most cases 2 mm. Click this button to process the bolt style or to create a new one.
Weld Settings Weld Style
Specify the kind of weld seam.
Weld...
You can specify which weld seams have to be created in the model using the options Weld Flange Side or Weld Web Side. The Thickness of the different weld seams is specified in the corresponding input fields. Click this button to process the weld style or to create a new one.
Page B.16 - 7
Plate Connections
Page B.16 - 8
Plate Connections
Stiffening Plates
As Poly-Plate
All kinds of stiffening plates described here which normally are carried out as flats can be transformed into a poly-plate using this option.
Backer Plates
You can specify additional backer plates automatically or according to certain dimensions. Thickness, width and length can be specified separately.
Top Plate
A cover plate can be created According to Girder in an automate way. The cover plate can be adjusted even further via thickness, edge distance and offset.
Web Plates Web Plates
Additional web plates can be generated as well. Indicate the position of the web plate by means of the option web plate left and web plate right.
Dimensions
The size is specified by thickness, width and length.
Drill Holes
No/Dia. indicates the number and the diameter of the drill holes. The Hole Distance and the horizontal and vertical offset of the web plate to the plate centre can be specified as well.
Page B.16 - 9
Plate Connections
Stiffeners
Stiffener
On the side of the end plate, stiffeners are inserted into the supporting shape at the level of the flanges.
Inner Stiffeners
Use this option to create additional stiffeners between the already created stiffeners. In the input fields, you specify the number and the distance to the upper and lower edge of the plate.
Support Stiffeners Here, you can insert additional diagonal ribs into the supporting shape. With the Height entry, you define the distance of the lower insertion point to the inner side of the flange. The prerequisite for generating this stiffeners is the use of a bottom train having a rib on the side of the bottom train an a cover plate. Click this button to select the command for insertion or edition of stiffeners. Here, you can modify the values and create new templates.
Page B.16 - 10
Plate Connections
Please note that the settings for stiffeners cannot be made independently here. You only select a template containing the necessary parameters. The advantage is that you have to define a certain kind of stiffener only once and then only select it by using its name. However, you mustn’t forget that in case of modifying this page after having modified this stiffener template the existing stiffeners are updated as well (i.e. they will obtain the dimensions of the modified template). Stiffeners at Bottom Train Supporting Shape Here, you specify the stiffener in the supporting shape at use of a bottom train. Connecting Shape Here you specify the stiffener in the connecting shape at use of a bottom train.
Here, you see an example of an end plate connection with bottom train, cover plate and diagonal stiffener in the supporting shape:
Page B.16 - 11
Plate Connections
Bottom Train You can add additional haunches and further stiffeners to each of the previous connections and create a strengthened connection. Bolted knees, etc. can be generated in a relative fast way.
Select Haunch
If the entry Top Haunch is checked, the haunch will be created on the upper side of the shape to be connected. If the entry Bottom Haunch is checked, the haunch will be created on the lower side of the shape to be connected.
Haunch Length
the length of the bottom train
Cut Width
the width of the bottom train at the intersection side
Top Height
the width of the bottom train at the top side
Flange Width
the width of the bottom train flange
Flange Thickness the flange thickness of the bottom train Plate Thickness the thickness of the web plate of the bottom train Facet Size
chamfer preset at the supporting side of the web plate
Facet Horizontal specification of the horizontal part of the chamfer at the connection side Facet Vertical specification of the vertical part of the chamfer at the connection side
Page B.16 - 12
Plate Connections
Cropped Shape A cropped shape is used as bottom train instead of a haunch of flat steel or plate. Additional stiffening plates can be inserted for a cropped shape. The dimensions are defined as follows: Stiff. Plate...
Indicate the dimensions of the stiffening plate: Width, Length and Thickness.
... as Plate
The stiffening plate is not carried out as a shape but as a plate.
Rectangular Plate
A rectangular plate is inserted as bottom train.
Perpendicular to Support A rectangular plate is inserted with the edges parallel to the support. As Poly-Plate
The inserted shapes of the bottom train are transformed into plates.
Rib Support
In the supporting shape, stiffeners are inserted on the level of the bottom train. Select the style under Ribs.
Rib Connection
In the connecting shape, stiffeners are inserted on the level of the bottom train. Select the style under Ribs.
Page B.16 - 13
Plate Connections
Form Group
Form Groups and Notches Create Group
At insertion of the end plate connection, groups are automatically created out of the inserted parts.
With Bolts
Bolts are added to the group as well.
With Welds
Welds are added to the group as well.
Safety Notches Safety Copes...
For the end plate connection, you can specify at which position a safety notch has to be inserted. This is a standard process in Northern America. You can choose whether you want to attach the notch on the Top left, on the bottom left, on the top right or on the bottom right.
Assignments As it is the case with each dialog creating component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Page B.16 - 14
Plate Connections
B.16.2
Connections Resistant to Deflection / Shear Forces
In the selection list, you can see the connections according to DAST, which is available for the selected shapes. You can control the basic connection data in this list, and the necessary shape stiffeners are displayed as well. Tension, Shear... Here, you can enter a maximum load for the connection (in KN) for the corresponding load type. In the list, only the connections suitable for these loads will be displayed. Plate List
In this list, the possible connections according to DAST are displayed. Select the desired connection by clicking it. The individual list fields display the data on which the connection is based. You might have to shift the column size to view all data. After the selection, the connection is immediately updated with these data and the values are transferred to the other dialog tabs for possible adaptation.
No Connection Possible If - according to the guidelines - no connection is defined for the selected shapes, no dialog tab will appear after selection of the shapes to define the connection. In this case, you have to define yourself the dimensions of the connection.
Page B.16 - 15
Plate Connections
Connections Resistant to Deflection
Meaning of the List Entries Designation
the standard designation of the connection
Width
the width of the plate (parallel to the flange of the connecting shape)
Thickness
the thickness of the plate
Length
the length of the plate (parallel to the web of the connecting shape)
Horizontal
the number of drill holes in direction of the plate width
Vertical
the number of drill holes in direction of the plate length
Diameter
the used bolt diameter
Bolt Standard
the used bolt type
Stiffeners
additional stiffeners are required for this connection
Backer
additional backer plates are required for this connection
Strengthening
Strengthening is required for this connection.
Projection
the projection of the plate beyond the shape to be connected
Af
the thickness of the weld seam at the flange
As
the thickness of the weld seam at the web
Page B.16 - 16
Plate Connections
Tension, Shear,.. Maximum loading of the connection
Shear Force Connections The meaning of the list entries corresponds to those for connections resistant to deflection so that you can refer to this chapter for information.
Page B.16 - 17
Plate Connections
B.16.3
User-Defined Connections
Just as the data for plates resistant to deflection and those subject to shear forces is recorded in databases, you can also create a database containing user-defined plate connections and later load these stored types using a selection list. In principle, this serves the same purpose as storing and then loading free plates with the template function. User-defined plate connections can display a larger amount of data in a more clearly organized structure because all parameters are visible in the view. You can also process or export the data with any standard dBASE editor. HINT: Take advantage of this option by creating a database with frequently utilized and maybe company-specific connections, which are then always available to all program users within your company. Since the dialog and process after creation of the database is almost identical – except for the selection - with those for the plates resistant to deflection, you can refer to this chapter for the meaning of the settings (see „Plates Resistant to Deflection„). How to create the database is listed in the technical supplement or just ask ProSteel dealer.
Page B.16 - 18
Base Plates According To DSTV
B.17 Base Plates According to DSTV Attach base plates to supports according to the specifications of the standardized connections used in the steel construction industry (DAST) using this command (with 2 holes). By indicating an additional distance, you have also the possibility to create base plates with 4 holes. In addition, you can define another hole field seizing any kind of drilling in a 2D grid.
Insert Base Plates After clicking a support and entering marginal specifications (e.g. load to be transmitted, concrete quality, etc.) a list of suitable base plates is displayed. Select a plate from the list and ProSteel will automatically carry out the complete processing and create the base plate. Since you have access to all plate dimensions, you can modify the defined values any time. Inclined support connections are also possible. Please note that the data concerning the load to be transmitted, refer to the vertical supports and connections according to DAST!
Seite B.17 - 1
Base Plates According To DSTV
Layout
Selected Column Display which Selected Column is processed at the moment. Plate Width
Width of the base plate
Plate Height
Height or length of the base plate
Plate Thickness Thickness of the base plate Grout Thickness In this input field, you can enter an additional space between the "Base Plate" (point of reference) and lower edge base plate. Once you have entered the supporting shape from the "Base Plate", all length dimensions will be adjusted correctly.
Group Options In Shape Direction If this option is activated, the plate is always attached normally beneath the shape. If the shape is slanted in the space, the plate is slanted as well.
Seite B.17 - 2
Base Plates According To DSTV
Shorten Column The column is shortened by the lining value. Form Group
The shape and the plate are arranged to form a group.
As Polyplate
The base plate is not formed as flat bar but as poly-plate.
Drill Holes
Group Inner Drill Holes Hole Distance
Distance of inner drill holes to the X-axis of the shape.
Hole Distance
Distance of inner drill holes to the Y-axis of the shape.
Hole Diameter
Diameter of inner drill holes
Group Outer Drill Holes Hole Field Width Number of drill holes of the outer hole field in the X-axis of the shape and intermediate distance of the drill holes of the outer hole field in the X-axis of the shape. Hole Field Height Number of drill holes of the outer hole field in the Y-axis of the shape and intermediate distance of the drill holes of the outer hole field in the Y-axis of the shape. Hole Diameter
Diameter of outer drill holes. Outer drill holes are only created if both axes have a valid description.
Seite B.17 - 3
Base Plates According To DSTV
Bolts / Dowels On this page, you make the settings of anchor bolts or welds. Anchor bolts are only displayed as symbols and cannot be detailed.
Group Bolts Tie Bolts
Anchor bolts are inserted for the inner drill holes.
Label
The designation of anchor bolts for the parts list; this name can contain two variables, $(ID) for inner diameter and $(OD) for outer diameter.
...Outside
Anchor bolts are inserted for the outer drill hole field as well, if defined.
Use Dowel
Dowel elements are created as volume bodies.
Input Field
You can specify a database file from which the dowel definitions can be taken.
In Bolt Partlist
The dowels are taken over into the bolt part list.
No Detailing
The dowels are not taken over into the DetailCenter.
Group Weld Settings Weld Style
Style name for the welds if a weld has to be effected.
Flange Side
Welds are inserted at the flange of the shape.
Thickness
If you want to overwrite the style thickness, you can enter the desired thickness for the flange side here.
Web Side
Welds are inserted at the web side of the shape.
Seite B.17 - 4
Base Plates According To DSTV
Thickness
If you want to overwrite the style thickness, you can enter the desired thickness for the web side here.
Standard Definitions Data base entries are saved for certain DIN shapes. If you have selected a shape having such entries, these will be displayed in this window. You can influence the selection by means of different selection criteria. Only data records corresponding to these criteria will be displayed.
Support Load
Enter the minimum load of supports which is known. The program searches the entries supporting this load or a higher load.
Hole Dia.
The desired drill hole diameter for anchor bolts.
Concrete Quality Quality of concrete foundations Select a displayed data record by double-clicking on it. All data are set accordingly. Please note that only the plate dimensions and the inner drill holes are set. Other settings are not modified.
Seite B.17 - 5
Base Plates According To DSTV
Dowels In addition, you can specify the type of dowel for fixing the base plates.
You can modify the execution of the dowel with the anchor bolt by modifying the values for diameter, length and key.
Assignments As it is the case for each dialog creating component parts, here too, it is possible to make all assignments for each individual shape directly. Select the component part and then select the settings.
Seite B.17 - 6
Base Plates According To DSTV
B.18 Web Angle This command creates steel web angles in three types of shapes IPE, HEA and HEB. Two web angles will be fastened opposite of each other on the ends of the shape to be connected when a support shape is not selected. The shape to be connected is cut to length after the exact definition is entered. The connection, drilling and bolting is carried out automatically. You can also select web angle connections according to the standard DAST guidelines.
Create Web Angle Connection First click the shape to be connected and then the supporting shape to connect the plate. Press the ENTER key or the right mouse button, if there is no supporting shape. The web angle command retains the last connection settings. Using this setting creates the connection. In the now appearing dialog, the dimensions may be modified and the results checked in the model.
Shapes
Seite B.17 - 1
Base Plates According To DSTV
Shape Class,...
Here you can specify the angle shape of the selected connection. Only shapes that are equal-sided angles and unequal-sided angles can be selected.
Use Flat
The web angle will be made from bent plate steel instead of angle steel. Enter the required dimensions in the Thickness, length of Long Leg, length of Short Leg and Bent Radius input fields. The program will determine the actual length of the steel plate.
Position
Here you determine the side of the shape (Left or Right) to be connected to the web angle. If both have been checked, a web angle is created at each side of the web.
Turn Angles
The long and short side of the web angle are exchanged so that the long side is situated at the connecting shape.
Gap
Here you indicate the distance to be kept between the end of the connecting shape and the supporting shape.
Side Offset
Here you indicate the distance between the web of the connected shape and the web angles (normally 0 or a slight clearance).
Vertical Offset
Here you indicate the distance the web angle is shifted from the axis of the shape to be connected, upwards or to the right (depending on the position). A negative entry will cause shifting in the opposite direction. Selecting one of the following options permits you to make additional specifications referring to the dimension.
From Edge
Means that the vertical offset is measured from the upper edge of the shape up to the upper edge of the web angle.
Lower Edge
The vertical offset refers to the lower edge of shape and web angle instead of to the upper edge.
Up to First Bolt
The vertical offset refers to the centre of the first bolt instead of to the edges of the web angle.
Seite B.17 - 2
Base Plates According To DSTV
Distances
Number (All Directions) Shape Direction The number of drill holes in both sides of the web angle crosswise to the shape to be connected (in the original position parallel to the connecting shape). Connect. Shape The number of drill holes in the long side of the web angle (in the original position parallel to the shape to be connected). Support Shape... The number of drill holes in the short side of the web angle (in the original position cross-wise to the connecting shape).
Distances (All Directions) Inner Distances These distances refer to the outer edge of the angle shape for each direction. If you indicate an additional Slot Length in the input fields beside Number, the drill holes are carried out as slotted holes with the indicated slot length. If you have checked the field Absolute Inner Distance, the inner distance of the holes in the short leg means the distance between the holes. Dist. Between
These distances specify the distance between two holes for each direction.
Seite B.17 - 3
Base Plates According To DSTV Connect
Bolt Settings Bolt Style
Select the bolt style (e.g. DIN 7990) for the connection in the list
Dia.
Specify the bolt diameter for the connection.
Workloose
Enter the desired clearance for the bolt connection, usually 2 mm.
Diagonal Offset A shift of the bolt axes between support and connecting bolts. Gap Spacing
Distance between the web of the supporting shape and the web angle. Click this button to edit the bolt style or to create it anew.
Seite B.17 - 4
Base Plates According To DSTV Welding
Weld Settings Weld Style
Specify the kind of weld seam.
Weld...
You can specify which seams have to be created in the model via Weld Side of Connecting Shape or Weld Side of Supporting Shape. The Thickness of the different weld seams is specified in the corresponding input fields. Click this button to edit the weld style or to create it anew.
Seite B.17 - 5
Base Plates According To DSTV
Cope In addition, you can add a cope to the connecting shape. Here, you enter the specifications of the cope.
Cope
Select an already stored cope template or you enter the cope data directly.
Connect. Shape Here you define how the connecting shape has to be coped. You can select Upper Side, Lower Side or Both. Specify the necessary gap distance for the cope in the Gap field. Click this button to create or modify the cope template.
Safety...
Seite B.17 - 6
Here you can specify whether a safety cope has to be carried out. In addition, the inserted angle can be shortened.
Base Plates According To DSTV
Standard Data In the selection list, you can see the web angle connections available in the database. In this list, you can verify the basic parameters of the connection data.
H(kN), Hz(kN)
You can select a web angle according to the DAST guidelines. Enter the desired load in the input fields. The possible connection angles will be displayed in the selection list.
List
In this List, the possible connections filed in the database are displayed. Select the desired connection by clicking an entry. The basic data of the connection are displayed in the different List Fields.
Meaning of the List Entries Shape
Web angle shape
Bolt
Bolt type used
Dia
Bolt diameter used
Material
Material designation of the web angle
Shape Direction Number of drill holes along the shape to be connected
Seite B.17 - 7
Base Plates According To DSTV
Transversal Dir. Number of drill holes cross-wise to the shape to be connected W1, W2, W3,...
Seite B.17 - 8
The meaning of the distances can be seen on the illustration of a cut-up web angle connection.
Base Plates According To DSTV
Form Group
Create Group
At insert of the web angle connection, the inserted parts are automatically arranged to form a construction group.
With Bolts...
Bolts and weld seams are added to the construction group as well.
Each Angle
An individual construction group is created for each inserted web angle.
Assignments As it is the case with each dialog creating component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Seite B.17 - 9
Base Plates According To DSTV
Seite B.17 - 10
Shear Plates
B.19 Shear Plates This command creates a plate connection (shear plate connection) made from plate steel and attached to a support shape. If you do not select a support shape, only one or two web plates are attached to the end of the shape to be connected. After you have indicated the specifications the shape to be connected is cut to fit and the connection is created by the program automatically including all drill holes and bolt connections. You also can select connections from an editable database. How to create the database is listed in the technical supplement or just ask your ProSteel dealer.
Creation of Shear Plate Connections First you have to click the shape to be connected and then the support shape, each one at the connection point (or use the enter key or the right mouse button if you don‟t have any support shape). If you select the shear plate command, it is based on your last settings and the connection is created with these settings first. In the appearing dialog you can adjust the dimensions and verify the result in the model immediately.
Shapes
Thickness
Here, you indicate the thickness of the web plate.
Page B.19 - 1
Shear Plates
Cut Plate
If this field is checked, the plate is cut at the connecting shape in case of bevelled shapes to be connected.
Normal to...
If this field is checked, the plate is not inserted in shape direction at bevelled connecting shapes but always perpendicular towards the connecting shape.
Poly-Plates
Poly-plates are inserted instead of flats.
Turn Flat
If a flat is used, it will be created with the size length x 10 instead of with the size width x 10. (Example: FL 110x10 becomes BRFL 250x10)
Position
Specify the web side of the shape to be connected (left or right), which is to be used for attaching the web plate. If Both is checked, a plate is attached to both sides of the web.
From Edge
means that the vertical offset is measured from upper edge shape to upper edge web plate.
Lower Edge
The vertical offset refers to the lower edge of shape and web plate.
Up to 1st. Bolt
If you have checked the field Up to 1st. Bolt, the vertical offset doesn‟t refer to the edges of the web plate but to the center of the first drill hole.
Gap
In the input field Gap you enter the distance to be adhered to from the outer edge of the support shape to the outer edge of the shape to be connected.
Vertical Offset
In the input field Vertical Offset you enter the distance of the offset for the web plate from the axis of the shape to be connected towards top or to the right (depending on position). Negative values effect an opposite offset.
Page B.19 - 2
Shear Plates
Distances
Group Division in Shape Direction Number
Number of drill holes in shape direction
End Offset…
Distance of the last center of a drill hole to the end of the web plate on the side of the connecting shape.
Connection…
Distance of the last drill hole to the end of the connecting shape on the side of the support shape.
Dist. Between.
Distance between two drill holes in the direction of the connecting shape.
Group Division in Transversal Direction Number
Number of drill holes in transversal shape direction
Edge Distance
Distance of the drill holes to the outer edge of the web plate.
Dist. Between
Distances between two drill holes in the transversal direction of the connecting shape.
Page B.19 - 3
Shear Plates
Connect
Bolt Settings Bolts
Select the bolt style (e.g. DIN 7990) for the connection in the list
Dia
Specify the bolt diameter for the connection.
Workloose
Here, you enter the desired clearance of the bolted connection, mostly 2 mm. Click this button to process the bolt style or to create a new one.
Weld Settings Weld Style
Here, you specify the kind of weld seam. Click this button to edit the weld style or to create a new one.
Weld...
Page B.19 - 4
Specify which seams to be created in the model using the option Weld Flange Side or Weld Web Side. The Thickness of the different weld seams is specified in the corresponding input fields.
Shear Plates
Cope In addition, you can notch the connecting shape. Enter the corresponding specifications in this dialog box.
Notch
You can either select an already stored notch variant or you enter the data directly.
Cope Connect… Here, you specify how the connecting shape has to be notched. You can select Upper Side, Lower Side or Both. Define the necessary gap distance for the notch in the Gap field.
Page B.19 - 5
Shear Plates
Standard Data In the selection list, you can see the shear plate connections available in the database. In this list, you can verify the basic parameters of the connecting data.
H(kN), Hz(kN)
Here, you can select a shear plate according to the loads. Enter the desired load in the input fields. Then, the available connection plates will be displayed in the selection list.
List
In this List the possible connections filed in the database are displayed. Select the desired connection by clicking it. In the different List fields, you can see the basic data of this connection.
Page B.19 - 6
Shear Plates Meaning of the List Entries Designation
Connection name
Thickness
Thickness of the web plate
Material
Material descriptions of the web plate
Dia
The utilized bolt diameter
Bolt
The utilized bolt type
Shape Direction The number of drill holes along the shape to be connected. Crosswise
The number of drill holes in perpendicular (crosswise) direction of the shape to be connected.
MaH, MaHz
Max. Load for this connection
W1, W2, W3,...
The following picture illustrates the meaning of the distances:
Page B.19 - 7
Shear Plates
Form Group
Create Group
At insertion of the shear plate connection, the inserted parts are automatically assigned to a construction group which is created.
With Bolts...
The bolts and weld seams are also added to that group.
Each Plate
An own construction group is created for each inserted shear plate.
Assignments As it is the case with each dialog creating component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Page B.19 - 8
Splice Joints
B.20 Splice Joints Use this command to create a web and/or flange plate joint between two shapes out of flat steel or dissolved sheet metal shapes. Both of the shapes have to be in alignment along the surfaces to be connected. If you do not select a second shape, plates are attached to the end of the first shape. After you have indicated the specifications, the shape to be connected is cut to fit and the program, automatically including all drill holes and bolt connections, creates the connection. You can also select connections from an editable database. How to create the database is listed in the technical supplement or just ask your ProSteel dealer. HINT: Take advantage of the dialog templates and save frequently required connections as templates. These templates can then be easily loaded. However, if you are working with a great many connections, we recommend using a database with user-defined types.
Page B.20 - 1
Splice Joints
Options
Gap Distance
Here you indicate the distance between the two shapes to be respected.
Bolts
Specify the desired bolt style for the connection.
Dia
Specify the desired bolt diameter from the list or enter the value directly if this option has been activated.
Workloose
This field is used to specify the hole clearance of the desired drill holes, which usually consists of 2 mm.
Upper Side
If this field is checked, a plate connection is attached to the upper side of the shape.
Lower Side
If this field is checked, a plate connection is attached to the lower side of the shape.
Single Side
If this field is checked, the splice joint is attached to the side of the second shape to be connected in the form of a welded connection.
Upper Inside
If this field is checked; an additional plate is attached to the inner upper side of the shape.
Lower Inside
If this field is checked, an additional plate is attached to the inner lower side of the shape.
Page B.20 - 2
Splice Joints
Diagonal
Use this option to create a bolted connection at one upper side and a welded connection at the other. For the lower side, it is just the opposite.
Left
If this field is checked, a plate connection is attached to the left side of the shape.
Right
If this field is checked, a plate connection is attached to the right side of the shape.
Create Group
If this field is checked, the web plate is assigned to a construction group together with the shape to be connected. If the shape is already part of another component group, the web plate will be assigned to the same group.
With Bolts
If this field is checked, the bolts of the shape to be connected are also added to that group.
Top/Bottom On the second page, you can enter the settings for the upper and lower splice.
Number Shape.. Indicates the number of bolts in shape direction Edges Outside
Indicates the projection of the splices beyond the last bolt
Page B.20 - 3
Splice Joints
Edges Inside
Indicates the distance from the starting point of the shape to the first bolt
Dist. Between
Indicates the distance from one bolt to the other
Number Cross.. Indicates the number of bolts transversal to the shape direction. Edge Outside
Indicates the distance of the plate beyond the outmost bolts
Inner Distance
Indicates the distance from one bolt to the other.
Dist. Between
If there are more than 2 bolts in transversal direction, this value indicates the distance from one outer bolt to the other.
Thickness
Select the plate thickness from the list. If you have activated the free selection option, you can enter this value directly.
Vertical
This value moves the splices in transversal direction to the shape.
Weld
If this setting is activated, no bolts and drill holes will be inserted, but the parts will be welded with each other. Length settings are still valid.
Length
Here you specify the length of the splice to be welded.
As
Enter your value here if you want to overwrite the thickness using the desired weld style.
Weld Style
Select the weld style to be used.
Page B.20 - 4
Splice Joints
Left/Right On the third page, you can enter the settings for the left and right splice.
Number Shape.. Indicates the number of bolts in shape direction at each side Edges Outside
Indicates the projection of the splices beyond the last bolt
Edges Inside
Indicates the distance from the starting point of the shape to the first bolt
Dist. Between
Indicates the distance from one bolt to the other
Number Cross.. Indicates the number of bolts transversal to the shape direction. Edges Outside
Indicates the distance of the plate beyond the outmost bolts
Inner Distance
Indicates the distance from one bolt to the other.
Dist. Between.
If there are more than 2 bolts in transversal direction, this value indicates the distance from one outer bolt to the other.
Thickness
Select the plate thickness from the list. If you have activated the free selection option, you can enter this value directly.
Vertical
This value moves the splices in transversal direction to the shape.
Page B.20 - 5
Splice Joints
Weld
If this setting is activated, no bolts and drill holes will be inserted, but the parts will be welded with each other. Length settings are still valid.
Length
Here you specify the length of the splice to be welded.
As
Enter your value here if you want to overwrite the thickness using the desired weld style.
Weld Style
Select the weld style to be used.
Data When you have defined a database for the selected shape, another page will be displayed. There, you can select the desired entry.
Assignments As it is the case with each dialog creating component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Page B.20 - 6
Purlin Connection
B.21 Purlin Connection This function permits the connection of purlin courses to roof girders. Different kinds of connection are possible. The connection can either be carried out as standard bolted connection, as connection with a purlin socket made out of a bent flat steel or by means of a splice or a shape. The assignments can be managed in a database to allow the selection of the suitable connections for the different shape sizes (e.g. the correct size of a purlin socket). When the command is selected, the specified connections available for selection are offered in a list. As to how to create the data base, please refer to the technical supplement or ask your ProSteel dealer.
Bolted Connection
Number Transv. Here, you enter the number of drill holes in transversal direction of the purlin shape. Distance Transv. Here you can indicate the axis distance at two or more drill holes.
Page B.21 - 1
Purlin Connection
Number Length Here, you enter the number of drill holes in shape direction of the purlin course. Distance Length Here you can indicate the axis distance at two or more drill holes. Bolts
Select the bolt type (e.g. DIN 7990) for the connection in the list
Dia
Here, you specify the bolt diameter for the connection.
Workloose
Enter the clearance for the connection.
Offset
Here, you can indicate an offset value for the bolted connection in longitudinal direction. If you enter positive values, the drill holes are moved in shape direction of the purlin course; negative values move them in the opposite shape direction.
List
Any possible connections filed in the database are displayed in this list. Select the desired connection by clicking an entry. In the different list fields, the data on which the connection is based are displayed.
Page B.21 - 2
Purlin Connection
Purlin Socket
Drill Holes
Here, you specify the dimensions of the purlin socket as well as the drill holes of the connection. The meaning of the distances is displayed in the figure below:
Bolts
Select the bolt type (e.g. DIN 7990) for the connection in the list
Dia
Here, you specify the bolt diameter for the connection between roof girder and purlin socket.
Page B.21 - 3
Purlin Connection
Dia Side
Here, you specify the bolt diameter for the connection between purlin socket and purlin course.
Workloose
Enter the clearance for the connection.
Create Group
The purlin socket and the roof girder are assigned to a construction group. If the roof girder is already belonging to another construction group, the purlin socket will be assigned to this other group.
With Bolts
The bolts are assigned to the roof girder belonging to the construction group as well.
Opposite Side
The purlin socket is attached at the opposite side of the purlin course.
Backer Plates
Specify the dimensions of backer plates in the corresponding input fields. These plates have to be used between roof girder and purlin socket. If you enter the value 0, no backer plates will be created.
Offset
Here, you can indicate an offset value for the bolted connection in longitudinal direction. If you enter positive values, the drill holes are moved in shape direction of the purlin course; negative values move them in the opposite shape direction.
List
Any possible connections filed in the database are displayed in this list. Select the desired connection by clicking an entry. In the different list fields, the data on which the connection is based are displayed
Page B.21 - 4
Purlin Connection
Connection Plate
Drill Holes
Here, you determine the dimensions of the plate as well as the drill holes of the connection. The meaning of the distances is displayed in the following figure of a purlin connection. If you enter the value 0 for w2, only one hole will be created in longitudinal direction of the purlin course.
Length – length of plate in shape direction of the purlin course. Height – height of plate in vertical shape direction. Thickness - thickness of the connecting plate.
Page B.21 - 5
Purlin Connection
Bolts
Select the bolt type (e.g. DIN 7990) for the connection in the list
Dia
Here, you specify the bolt diameter for the connection.
Workloose
Enter the clearance for the connection.
Supporting Plate An additional supporting plate is created perpendicular to the plate which can be determined separately. Click on this button to open the dialog for determining the dimensions of the supporting plate. Create Group
The plate and the roof girder are assigned to a construction group. If the roof girder is already belonging to another construction group, the plate will be assigned to this other group.
With Bolts
The bolts are assigned to the roof girder belonging to the construction group as well.
Opposite Side
The splice is attached on the opposite side of the purlin course.
Weld Seam
The plate is welded to the roof girder. In the Af input field, you can specify the thickness of the weld seam, and in the selection list you can indicate the type of the weld seam.
Offset
Here, you can indicate an offset value for the bolted connection in longitudinal direction. If you enter positive values, the drill holes are moved in shape direction of the purlin course; negative values move them in the opposite shape direction.
List
Any possible connections filed in the database are displayed in this list. Select the desired connection by clicking an entry. In the different list fields, the data on which the connection is based are displayed
Page B.21 - 6
Purlin Connection
Page B.21 - 7
Purlin Connection
Additional Supporting Plate
Thickness
The thickness of the supporting plate
Length
The length of the supporting plate in shape direction of the shape
Height
The height of the supporting plate in vertical direction of the shape
Inner/Outer Chamfer Here, you enter the horizontal and vertical dimensions of the inner (1) or outer (2) chamfer.
Weld Seam
Page B.21 - 8
The plate is welded to the roof girder. In the Af input field, you can specify the thickness of the weld seam, and in the selection list you can indicate the type of the weld seam.
Purlin Connection
Connection Shape
Length
The length of the shape in shape direction of the purlin course
Number
Here, you enter the number of drill holes in shape direction of the purlin course. In the input field w3 you can indicate the axis distance in the case of two or more drill holes.
Base Drill Holes Specify the distance of the roof girder holes to the outer edge of the purlin course. Lateral Drill…
Here, you indicate the distance of the drill holes in the purlin course to the upper edge of the roof girder.
Bolts
Select the bolt type (e.g. DIN 7990) for the connection in the list
Dia
Here, you specify the bolt diameter for the connection between roof girder and shape.
Dia Side
Here, you specify the bolt diameter for the connection between shape and purlin course.
Workloose
Enter the clearance for the connection.
Perpendicular
The shape is positioned in a perpendicular way in order to insert e.g. a U-shape vertically.
Page B.21 - 9
Purlin Connection
Turn
The shape is rotated by 90° around the longitudinal axis.
Create Group
The shape and the roof girder are assigned to a construction group. If the roof girder is already belonging to another construction group, the shape will be assigned to this other group.
With Bolts
The bolts are assigned to the roof girder belonging to the construction group as well.
Opposite Side
The shape is attached at the opposite side of the purlin course
Backer Plates
Specify the dimensions of backer plates in the corresponding input fields. These plates have to be used between roof girder and shape. If you enter the value 0, no backer plates will be created.
Offset
Here, you can indicate an offset value for the bolted connection in longitudinal direction. If you enter positive values, the drill holes are moved in shape direction of the purlin course; negative values move them in the opposite shape direction.
Shape Type
Here, you can select the shape to be used for the connection. Special shapes can be used as well.
List
Any possible connections filed in the database are displayed in this list. Select the desired connection by clicking an entry. In the different list fields, the data on which the connection is based are displayed.
Page B.21 - 10
Gusset Plates
B.22 Gusset Plates This command is used to create a gusset plate which combines several shapes with each other. The form is optimally defined on the base of the shapes to be connected and further limiting edges. The shapes and the gusset plate are automatically drilled and combined with each other by bolts. To create a gusset plate, you first have to select the shapes to be connected and then you can select even further shapes serving as additional limiting edges. These limiting edges influence the form of the gusset plate. For example you can connect three shapes with a support using a gusset plate and it is guaranteed that the gusset plate is fit tightly to the web of the support.
Plate Thickness Specify the thickness of the gusset plate. Bolt Style
Enter the bolt type.
Dia
Indicate the hole diameter.
Workloose
Indicate the hole clearance.
Offset
Here, you specify the value by which the gusset plate has to extend beyond the shape edges in transversal shape direction.
Page B.22 - 1
Gusset Plates
Gusset Pos
Here, you specify the position of the plate to be created, related to the connected shapes. If you have selected „Plate Center‟, the gusset plate will be created in the center of the shapes. If you have selected „Plate Upper and/or Plate Lower‟, a gusset plate will be created at the upper edge and/or at the lower edge of the shapes, depending on the selection. It is possible to connect shapes with two plates as well.
Limiting Shape
If this field has been checked, it is not the edge of a limiting shape situated next to the gusset plate, which is used as borderline, but the opposite line. Iit is possible to design a gusset plate in a way that it overlaps e.g. the complete flange of a limiting shape.
Weld Bracing
If this field has been checked, the shapes and the plate are not drilled. It is possible to combine them with each other using a weld.
Form Group
If this field has been checked, a group will be formed on the base of the gusset plate and the connected shapes.
With Bolts
If the 'With Bolts' field has been checked as well, the bolts of the shape to be connected are also added to that group.
Use Existing Holes Existing holes are used instead of drilling new ones. Click on this button to add further shapes to the gusset plate connection. Now, the form of the gusset plate is calculated anew and the new shapes are also connected with the plate. Click on this button to remove a shape from a gusset plate connection.
Click on this button to add further shapes as limiting edges for gusset plate calculation. You can e.g. extend a gusset plate up to a support. Click on this button to remove an additional limiting edge.
Page B.22 - 2
Gusset Plates
Drill Hole Distances
Number Shape
Number of drill holes in shape direction.
1 Edge 1 Hole
Distance of the shape edge to the first hole.
Hole – Hole
Distance of one drill hole to the other in shape direction.
n Hole - Edge
Distance of the last drill hole to the edge of the plate.
Number Transv. Dir. Number of drill holes in transversal shape direction. Transversal Distance Distance of drill holes in transversal shape direction. Drill Hole Pos.
Insertion axis of drill holes.
Please note that you can indicate all distances either as absolute values or as many times the amount of bolt diameter. Enter e.g. *2 for the double value to obtain many times the amount of bolt diameter.
Assignments As it is the case with each dialog of the component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Page B.22 - 3
Gusset Plates
Page B.22 - 4
Dynamic Bracing
B.23 Dynamic Bracing This function generates a wall bond or bracing. You can select between varieties of different design variations. Available are shape bracings, tension bar bracings, as well as pressure pipes. The entire bracing including gusset plate is generated. To generate a bracing first place your user coordinates system over the bracing plane and then calls the function. You are now prompted to click on a system line of the bracing. Finally, click on both shapes to which the bracing is to be joined. The following dialog box appears. The first two folders are the parent folders for all others; the other folders can be selected according to the desired type of bracing.
Page B.23 - 1
Dynamic Bracing
B.23.1
Common Settings
Generalities
Shape Selection: Here you indicate the utilized shapes for the bracing bars. Enter the shape catalogue into the first selection box, the shape type into the second, and the shape size into the third. Plate Thickness indicates the thickness of the gusset plate. Edge distance
Here you can specify the distance from the outermost edge of the bracing bar to the boundary edge of the bracing (this is most often a shape edge).
Round shapes
this value is used to round off the length of the shape.
Plate width
Here you indicate the minimum gusset plate width at the shape.
Position
The position of the gusset plate in reference to the bracing plane can be specified with the fields Plate Position Front Edge, Center, and Rear Edge.
Page B.23 - 2
Dynamic Bracing
Form
Here you determine the shape of the gusset plate.
Opening Angle
Here you can determine the opening angle of the gusset plate towards the bracing bar at the shape „Triangle bent‟.
Cross Bracing:
If this switch is checked, the bracing is designed in the shape of a cross stay. Otherwise, only one bracing bar is added to the clicked on system line.
Welded Bracing If this switch is checked, the bracing is welded in its entirety. No borings are added in that case. Form Group:
If this switch is checked, the individual bracing elements are formed into groups.
Symmetrical:
If this switch is checked, the bracing is designed in the form of a cross stay and remains symmetrical if modified with its grips. Otherwise, every bar can be changed individually.
No Gusset Plates If this switch is checked, no gusset plates are created at the supporting shapes. Dynamic:
If this switch is checked, the bracing immediately depicts the modifications made in the dialog. If you would like to modify many values, you can deactivate this option for the time being. By clicking on this button, you can add additional boundary edges (lines) for the gusset plate calculation. This method enables you to lengthen a gusset plate up to the base plate, for example. If the vertical of a gusset plate end point cuts this boundary line, the gusset plate is extended up to this point. Otherwise, the nearest end point of the line will be accepted. To add a boundary edge, just click on a line or specify a line by indicating two points. To delete an additional boundary edge, just click on this button. To stop the creation of a gusset plate at the end of a bracing bar, just click on this button.
Page B.23 - 3
Dynamic Bracing
Click on this button to include any bracing bar which doesn‟t belong to the bracing in the creation of a gusset plate. Click on this button to exclude any bracing bar which doesn‟t belong to the bracing from the creation of a gusset plate.
Page B.23 - 4
Dynamic Bracing
Bolts Group Bolts Bolts
Specify the bolt type.
Dm
Specify the hole diameter.
Work loose
Specify the hole work loose.
Group Holes Here you enter the number of borings and the spacing of the drilled holes to be observed. You can either specify absolute values or how many times the amount of the hole diameter. If the entries have to be a multiple of the hole diameter, put an asterisk (*) in front of the multiplier. Shape Direction The number of drilled holes in the direction of the bracing bar (on both ends). st
Edge-1 hole
the distance from the end of the bracing bar to the first hole center in the direction of the bar.
Hole-Hole
sets the space between the drilled holes in the direction of the bar.
Nth Hole-Edge
The distance from the last hole to the outer edge of the gusset plate in the direction of the bar.
Cross Direction
The number of drilled holes crosswise to the bracing bar.
Page B.23 - 5
Dynamic Bracing
Distribution
B.23.2
The distance between the drilled holes, crosswise to the bar direction.
Shape Bracing
If you would like to create a bracing from shapes and gusset plates, select the folder SHAPE BRACING.
Page B.23 - 6
Dynamic Bracing
Group Shape Offset Shape Position
Here you select the position of the shapes in relation to the gusset plates. Front- the shapes are located in front of the gusset plate. Back - The shapes are located behind the gusset plate.. Cross - One shape is located in front of the gusset plate and one behind. Centered - The shapes are located in the bracing plane. Double – One shape each is located in front of and behind the gusset plate (total of 4 shapes for cross stay). Replaced – One shape each is located in front of and behind the gusset plate with one being offset to the left and one to the right (total of 4 shapes for cross stay). 4-Times– One shape is located on each side (front, rear, left, right), which makes a total of 8 shapes for cross stay.
Shape distance the distance of the shapes for offset or 4-Times bracings. Rotation Angle
Is used to specify a rotation of the shapes.
Shape Insertion Specify the insertion position of the shapes Centred - The shapes are inserted along the shape axis... COG Line - The shapes are inserted along the COG (Centre of Gravity) line. Pitch Line – The shapes are inserted along the pitch line. Diagonal – The shapes are inserted along their corner points ”Upper Edge Left“ up to “Lower Edge Right“.. Inverse Diagonal – The shapes are inserted along their corner points from „Lower Edge Left“ up to „Upper Edge Right“. Hole Position
Here you set the hole positions in the shape. Centred - The holes are drilled on the shape axis. COG Line - The drill holes are drilled on COG line. Pitch Line – The holes are drilled on the shape pitch line.
Offset
Specify a projection of the central gusset plate extending past the shape edges of the bracing bars. Positive values increase the size of the plate whereas negative values decrease it.
Shorten
Here you can specify a value to be used to shorten the shapes after the bracing has been generated.
Mirror Shapes
If this field is checked, the shapes are mirrored and then inserted.
Center Hole
At a cross stay and selected shape position 'Crossed', a common hole is drilled into the shapes that are crossing each other.
Page B.23 - 7
Dynamic Bracing
Divide All
If this field is checked, all shapes of a cross stay are separated at the center gusset plate.
Group Bind Plates Bind Plates
Opposing shapes have batten plates as stiffeners. The following input fields can be used for a further description of the batten plates:
Distance
The distance of the batten plates; the program divides the distances regularly according to this specification and the values are rounded up or down correspondingly.
Offset
In the field Offset, you specify the distance of batten plates from the shape edges. Positive values decrease the size of the plate whereas negative values increase it, i.e. the plate has a projection.
Number
The number of bolts which are used to connect each batten plate with the shapes.
st
Edge-1 hole
The distance from the end of the batten plate to the first hole center in the direction of the bar.
Hole-Hole
The space between the drilled holes in the direction of the bar
Dia
Diameter of bolting in the input field Dm
Work loose
the hole work loose of bolting
Weld
The batten plates are not connected by bolts but by a weld. Indicate the weld style in the selection list. Indicate the weld thickness in the input field, if it differs from the default settings of the style. Click on this button to process the weld style or to create a new style.
Page B.23 - 8
Dynamic Bracing
B.23.3
Rod Bracing
If you would like to create a bracing from tension rods, select the folder Rod Bracing. You can select a variety of different variations.
Layout
Select the layout for the rod bracing
Tension Rod with Cam. A bracing with a traversing tension rod is generated. The shapes connected with the bracing are penetrated and fastened in the back with a tension element Offset
The Offset field is used to specify the projection of the tension rod beyond the shape. The Hole Dia. field is used to specify the diameter of the oblong hole to be drilled. The Slot Axis field is used to specify the length of the oblong hole to be drilled. The Part Description field is used to specify a term for the tension element to be used with the parts list.
Page B.23 - 9
Dynamic Bracing
If the field Create Element is checked, the tension element is generated and displayed. The dimensions of the tension element can be specified in the input fields Width, Thickness and Radius.
Turnbuckle A bracing with two tension rods joined by a tension element is generated. A butt strap is welded to the end of the tension rod, which is used to connect to the shapes via a gusset plate. When you selected the version Sliced, the strap receives a slit and the tension rod is welded to the center. If, on the other hand, you selected Welded, the tension rod is welded to the strap. The Butt Strap Length field is used to specify the length of the strap. The Butt Strap Width field is used to specify the width of the strap. The Butt Strap Thickness field is used to specify the plate thickness of the strap. The Offset field is used to specify by how much the tension rod and the butt strap are overlapping. The Gap field is used to specify a gap between the cut out butt strap and the tension rod for production tolerances, if the 'Sliced' option has been selected. The Turnbuckle field is used to specify the length of the tension element. The Offset field is used to specify the length of projection. The Dm field is used to specify the diameter of the tension element. The Distance field is used to specify the distance of the tension element from the outer end of the bar. If the value 0 is indicated here, the element will be placed in the center of the corresponding bracing segment. The Part Description field is used to specify a term for the tension element to be used with the parts list.
Page B.23 - 10
Dynamic Bracing
Tension Rod A bracing with a tension rod is generated, which has a welded on connection element. The Butt Strap field is used to specify the length of the connection element. The Butt Strap Width field is used to specify the width of the connection element. The Butt Strap Thickness field is used to specify the thickness of the connection element. The Bolt Diameter field is used to specify the bolt hole diameter in the connection element. The Outer Radius field is used to specify the outer radius of the connection element. The Part Description field is used to specify a term for the tension element to be used with the parts list Beneath please find an example for the different variants of a tension rod bracing:
Bracing Catalogues Databases may be generated for the tension elements of all three types. The terms and dimensions can be loaded from these databases. An additional folder “Bracing Catalogues” will be displayed where you can select a dBASE-file. After selection of a valid file, you can choose a tension element for the different versions from a selection list. This element is defined in the database. The dialog entries will then be filled with the corresponding values.
Page B.23 - 11
Dynamic Bracing
B.23.4
Pipe Bracing
If you would like to create a bracing from pressure pipes and butt straps, select the folder Pipe Bracing. You can select a variety of different variations.
Gruppe Butt Strap Form Butt Strap Type Here you set the variant of the connecting butt strap. Inserted - The butt strap is welded into the pipe. Pipe sliced - The pipe is slit and the strap is welded at that point. Strap sliced - The strap is slit and the pipe is welded at that point. T-Shape – A T-shape section is welded onto the pipe. You can select a shape in the Selection Lists depicted opposite. Endplates – A head plate is welded onto the pipe and a butt strap is welded onto this head plate. Butt Strap Length Specify the length of the strap. Butt Strap Width Specify the width of the strap. Butt Strap Thick Specify the thickness of the strap.
Page B.23 - 12
Dynamic Bracing
Butt Strap Offset Specify the overlap length of the pressure pipe and the strap Escape Gap
Width of the gap between pipe opening and butt straps
Shapes:
You can select the shapes in the selection lists, if you have selected 'T-shapes' as butt strap type.
Create Group with Pipe Forms a group out of a bracing. With Bolts
The bolts are inserted into the group.
Group Endplates You can indicate further specifications for the head plate, if you have selected 'Head Plate' as butt strap type. Width
Enter the width or the diameter of the head plate.
Thickness
Enter the plate thickness of the head plate.
Type
If the Edge field is checked, a square head plate is created with the same width as specified under 'Width'. If the Round field is checked, a round head plate is created with the same diameter as specified under 'Width'. If the Use Polyplates field is checked, the head plates are created as plates.
Example for a pipe bracing
Assignments The created component parts can receive different assignments such as material and so on.
Page B.23 - 13
Dynamic Bracing
Page B.23 - 14
Static Bracing
B.24 Static Bracing
This command supports you when bracings have to be created. You can add bracing rods, drill and design the appertaining gusset plates, or have them designed automatically. The program always enters bracings in the active UCS plane, i.e. you should place the UCS with its origin into the desired bracing plane and align it parallel. Since the rods are aligned in accordance with the system lines, they should have been created previously. In case of a cross-stay with uniformly staggered rods, the middle of the system will be sufficient. The rods can be arranged alternatively. In contrast to the dynamic bracing, this bracing here doesn‟t react to modifications. However, it can be created individually piece-by-piece.
Page B.24 - 1
Static Bracing
B.24.1
Settings
Shape Definition
Shape Type
Here you select the type of shapes to be used.
Resolution
Here, you specify the resolution.
Shape Class
Select the desired shape class from the selected types.
Shape Size
Select the desired shape size of the selected shape class.
UCS-Position
Select the alignment of the gusset plates and thus of the bracing shapes with regard to the current UCS-system.
Page B.24 - 2
Static Bracing
Rod Position
Determine the position of the bracing rods with respect to the gusset plate. Front means on the positive Z-axis, Back means on the negative Z-axis, Both means on both sides and Centered means that a rod is positioned in the middle of the axis.
Rod Insertion
Here you specify the position of the rod with respect to the insertion line (system line). You can insert the rod in the middle, on the gravity line or on the root line.
Rotation:
You can insert the rod in its normal position or rotated by +90 degrees or -90 degrees. You can check the selected mode in the shape window of dialog field.
Mirror:
You can insert the rod in its normal position or in a mirrored way. You can check the selected mode in the shape window of dialog field.
Plate Thickness: The thickness of the gusset plates
Bolts
Bolt Style
The bolt style to be used
Dia
The diameter from the bolt diameter table
Workloose
The clearance between bolt and hole diameter
Page B.24 - 3
Static Bracing
Number Shape
The number of bolts in shape direction
Number Cross
The number of bolts transversally to the shape direction
Drill Hole Pos.
Here, you specify the position of drill holes in the rod.
Distance Cross
The distance from one bolt to the other in transversal direction.
Weld Bracing
If this field is checked, the shapes and gusset plates are not drilled. The dimensions of the gusset plates, however, are determined as if drill holes existed.
Plate Without..
If this field is checked, the corners of the gusset plates are not bevelled but a rectangular plate is created.
Create Group
A group is formed for each rod.
With Bolts
The bolts are also allocated to the group.
Edge Distance The third page serves for managing the edge distances depending on the bolt diameter which have to be respected when the bracing shapes are installed.
List:
Page B.24 - 4
You can directly click on the corresponding entries and the processing mode will be switched on. Then you can directly enter the value.
Static Bracing st
Edge- 1 Hole
Distance of the outermost hole axis in the bracing rod to the rod front edge.
Hole – Hole
Spacing of the hole axes in longitudinal direction
Hole – Edge
Spacing of the outermost hole axis in the gusset
Limit Edges
Specify the desired distance of the bracing rods to the limit edges.
Bracing Rod
Specify by which value the bracing rod has to be shortened after its insertion. Thus, the rod will be kept in tension.
Page B.24 - 5
Static Bracing
B.24.2
Creation of Bracing Parts
To a large extent, you can make the program automatically create the components of a bracing. However, it is possible as well to generate single components such as gusset plates, etc. individually. For this purpose, several individual functions are available which will be described in the following.
BRACING Click this button to generate bracing rods and gusset plates in one operation. However, this function is not suitable for the connection of several rods from different systems. In this case, you should use the individual functions instead. After the action has been finished, you return to the dialog.
SINGLE ROD Click this button to insert single bracing rods that are directly drilled.
DRILL ROD Click this button to drill existing shapes on their ends, according to the definitions in the dialog field. You must select the shapes for this purpose. You will return to the dialog field afterwards.
PLATE AUTO Click this button to create a gusset plate automatically. Select the drilled bracing rods that have to be connected and then click boundary lines for the plate edges. The program will try to find a suitable plate dimension by keeping the edge distances and the boundary lines.
Page B.24 - 6
Static Bracing
PICK PLATE Click this button to determine yourself the shape of the gusset plate. Select the drilled bracing rods that have to be connected and pick a point on the planned bracing end. Click the approximate position of the gusset plate. The edge distances will be displayed.
UCS If you have not yet aligned the UCS before using the command, you can do this subsequently: the active UCS plane (and consequently the plane of the bracing) will be determined by clicking 3 points. You will return to the dialog field afterwards.
Page B.24 - 7
Static Bracing
Creating a Bracing Let‟s start out from the fact that you want to design a simple roof bracing. The diagonals are to intersect (without the gusset plate in the middle). Select the command for bracing and select the ‟Plate Middle‟ for the UCS position. Determine the position of the shape and the settings for bolts, plate thickness, etc. Since the two rods are to intersect, select the „Front‟ rod position beforehand. Then click the BRACING button. The program will prompt you to enter the system line of the bracing rod. Click one of the two system lines, e.g., the one leading from down below on the left to the top on the right. You must determine the limit edges of the bracing rod (i.e. the edges from which the outermost rod edge is to have the distance as defined in „Options‟). Click the inner web line of the roof girder - as shown on the left. Repeat this on the other rod end. If you have clicked the wrong line, you can cancel this by entering the letter b (Back). When you have selected both limit edges, confirm this by pressing the ENTER key or by using the right mouse button. A dialog field will be displayed, which shows exactly the calculated rod length. You can round the value in the desired rod length field. The rod is now displayed with drill holes. You must now determine the gusset plates.
Gusset Plates The program will prompt you to enter the boundary line for the gusset plate. You can control the shape by selecting these lines - some variants are shown on the left side depending on selection. You may need construction lines which have either been created beforehand or which can be „shown‟ using two points. You can confirm by pressing the ENTER key or by clicking the right mouse button. The next gusset plate can be created afterwards.
Page B.24 - 8
Static Bracing The first bracing rod is complete. The second rod is created in the same manner with the exception that you select the rod position „Rear‟ (to avoid intersecting rods). If you want to create a bracing with a gusset plate in the point of intersection, do not stagger the rods. Open, shorten, and drill the rods manually at the point of intersection. Create a single gusset plate with the function for the bracing (button PLATE AUTO or PICK PLATE).
Page B.24 - 9
Static Bracing
Page B.24 - 10
Haunches
B.25 Haunches
ProSteel automatically generates haunches by clicking two shapes or by picking points on a construction line. For instance, after having inserted a column and roof girder in the model, all construction lines that are necessary for a normal haunch have been created. In addition to the actual haunch, you can also create additional stiffeners using this function. These stiffeners then can be directly assigned to the corresponding groups (see „Groups‟ command). This command enables the creation of tapered haunch connections, i.e. adaptation of the upper and lower haunch chord to the support / connecting shape. Therefore the complete haunch creation is limited to one single function call.
Upper Chord
Enter width and thickness of the haunch top chord.
Lower Chord
Enter width and thickness of the haunch bottom chord.
Web
Enter the thickness of the haunch web plate.
Coped Shape
If this field is checked, and you selected Bottom Train as haunch type, the haunch is not made from individual plates but from a coped shape. The shape size corresponds to the connection shape; all other shape size fields are then ignored. In the neighbouring input field, you can specify the distance from the bottom train at the end of the cropped shape (analogue to the „Haunch Head Width‟).
Page B.25 - 1
Haunches
Bottom Stiffener If this field is checked, a stiffener is attached to the base point of the haunch of the support shape. You can select a stiffener type in the list displayed here. Just select a stiffener template, which you previously saved using the command „Stiffeners‟.
Top Stiffener
If this field is checked, a stiffener is attached to the head point of the haunch of the connected shape if you selected „Bottom Train‟ as haunch type. You can select a stiffener type in the list displayed here. Just select a stiffener template, which you previously saved using the command „Stiffeners‟.
Length,...
In the following figure, you can see the meaning of the inputs for haunch length, roof pitch, bottom width, head width and offset. A modification in the input field roof pitch has only an effect if a haunch has been created without supporting shape. In the input field Cone Width you enter a width to which the haunch tapers if required.
Create Group
If this field is checked, top flange, bottom flange and web plate are arranged to form a group
Bottom Train
If this field is checked, no top flange is created, e.g. for the construction of frame corners.
Cone
If this field is checked, a tapered haunch is created by fitting the width of the haunch flanges to the support and connection shape and then tapering them. Use the „Cone Width‟ field to specify a cone width if you have a specific value in mind. However, the „Fixed Size‟ field cannot be checked as well.
Page B.25 - 2
Haunches
Fixed Size
If this field is checked, the head width and any existing cone width are fitted to the shape to be connected. Inputs in these fields will be ignored in this case.
Turn
If this field is checked and „Bottom Train‟ has been selected as haunch type, the haunch on the topside of the shape is selected. If the connection appears to be turned, you can rotate it here. Click this button and the data of an existing connection are transferred to the connection to be created now. You have to click the existing haunch connection to achieve the transfer.
Creating Haunch Connections When using the haunch connection command, the first prompt is for the shape to be connected. Click the shape near the end to be connected. If the ALT-key is pressed while clicking the shape to be connected, the haunch connection is directly created as a bottom train. Then, you are prompted for the supporting shape (the shape to connect to) that has to be clicked as well. No supporting shape is considered when pressing RETURN or the right mouse button, and a simple haunch can be created at the shape to be connected. When using the haunch command, the last settings are used to create the connection. Adjust the dimensions in the open dialog and track any changes immediately in the model. If you keep the ALT-key pressed when clicking the supporting shape, the dimensions of the haunch flanges and of the web plate are fitted to the dimensions of the supporting shape.
Page B.25 - 3
Haunches
Unrestricted Haunch Positioning Another option is to specify a user-defined position for the haunch. Just press the ESC-key after the command has been selected. The program prompts you now for the intersecting point of the base boundary line with the upper flange that you have to select by clicking it (consider using the virtual intersecting point without Z). Finally, click the approximate direction of the haunch. The haunch is now created at the specified position and you can dynamically adjust any of the settings in the dialog. Any shape adjustments have to be carried out manually, of course.
Assignments As it is the case with each dialog creating component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Page B.25 - 4
Connection Editor
B.26 Connection Editor ProSteel permits you to edit and exchange all connections of a construction in a comfortable and clear way. A separate editor dialog is available for this purpose. If you select the function via the command name or by clicking on the CONNECTIONS button, you first have to select all parts of the connections of which have to be edited. Then, these parts are displayed in a uniform marking colour (for better orientation) and all other parts are hidden. If a connection exists between the selected component parts, this connection is displayed as coloured symbol. You can select the complete connection for further processing by picking the symbol. You avoid having to look for the connection via the shape properties. After the command has been selected, the following dialog opens, the modifications will not be valid before re-opening of the command for a second time.
Page B.26 - 1
Connection Editor
Group Display Length
Here, you specify the length of the 3D-arrow for the connection symbol. The direction of the arrow shows from the connected part to the component to which it was connected.
Diameter
Here, you specify the diameter of the 3D-arrow for the connection symbol.
Colour
Here, you specify the marking colour for the surrounding construction as AutoCAD-colour number. Since the construction only has to serve for your orientation, you should select a “weak” colour here so that the symbols can be easily recognized. The symbols themselves are displayed in green, red and yellow.
Group Options Hide...
The selected objects are hidden to increase a clear view. You can hide work frames and structural elements (the construction lines of structural elements). Bolts are always hidden.
Standard Connections All standard connections are displayed as symbol. These are the normal connections such as end plates, etc. which are integrated in ProSteel. Cut Connections All cut connections are displayed. These are the cuts at objects or mitred cuts. COM-Connections All external connections realized via the COM-PlugIn„s are displayed. Delete with
When a connection is deleted, all attached parts generated by this connection will be deleted as well.
Dialog-Commands DELETE Click on this button to remove the selected connections completely, i.e. all component parts and processing actions created by means of these connections will be deleted as well. To do so, you have to select the connections by clicking on the symbols.
Page B.26 - 2
Connection Editor EDIT Click on this button to edit the selected connection. After the desired connection has been clicked via the symbol, the corresponding dialog of this connection opens and the values can be modified.
CLONE Click on this button to transfer the settings of a connection to another one. It is also possible to change the connection type if this is reasonable (e.g. you can replace a plate connection by a web angle connection). First, you have to select the connection the data of which have to be transferred to another one. All connections not being able to seize these data are hidden. Then, you have to select all connections having to take these data.
Verify Connections If the „Verify Connections‟ option has been checked, all connections are verified with regard to collisions and marginal distances before being displayed as symbol. The status of this verification is displayed by means of the colour of the symbol. They have the following meaning: Green Yellow Red
The connection is correct The hole distances are not observed The connection has collisions
Edit Single Connection If there is only one connection in a component part, such as e.g. a connected cantilever, you can easily edit it via the context menu of the right mouse button. Select the component part and click on the MODIFY CONNECTION entry in the context menu. This entry doesn‟t exist if the part has no or several connections. A connection is also if there are other parts connected to the component part in question.
Page B.26 - 3
Connection Editor
Page B.26 - 4
Group Structure
B.27 Group Structure B.27.1
General Information about Groups
Various single components, bolts and special parts can be combined to form groups - i.e. a support with welded endplates and stiffeners. The groups can be hierarchically structured in subgroups, standard component part groups and assemblies. Each parent group can itself contain subordinate groups of a lower type. The group structure existing in the model is taken into account for the parts lists and when the model is automatically detailed and transformed into 2D workshop drawings. Many of the settings can be done separately for assemblies, component part groups, subgroups and single components. Certain functions apply to the complete group, even if you only select one part of the group. After the command has been selected, the main window opens where the available functions can be selected. Click on the corresponding button to apply them. Most of the commands can be directly selected via a separate menu command. To permit rapid processing of several groups one after the other, some functions are self-loading (loop version). If you want to cancel the function, you have to press the ESC-key or the right mouse button. In the settings, you can specify for which group commands a loop version is required and for which not.
Structure of Component Part Group ProSteel-material groups consist of a main part and the associated accessory parts. You can choose any assignment, or it is automatically set for some commands on request. In addition, you can add subgroups to component part groups. In order to do so, just insert the main part of a subgroup into the material group. In practise, these component part groups mostly correspond to the dispatched parts that are delivered to the site in a preassembled condition. Such a combination is recommended but not mandatory. You can decide how to best combine the parts.
Page B.27 - 1
Group Structure
Structure of Subgroup Like standard component part groups, ProSteel-subgroups consist of a main part and the associated accessory parts. In practise, these subgroups mostly correspond to the purchase or stock parts that in a preassembled condition are again used in component part groups or in assemblies. Subgroups and standard component part groups are based on the same logic and therefore nearly behave identically.
Structure of Assembly ProSteel-assemblies consist of any component parts without having a determined main part. This permits to form free groups of parts and structures. In addition, component part groups and subgroups can be inserted into an assembly as well. In order to do so, just insert the main part of the subgroup or of the material group into the assembly. In practise, assemblies mostly correspond to several material groups, subgroups and single parts which are combined on the site. For more detailed useful information about group structure and its application in practise for drawing generation, please refer to the different chapters of detailing.
Page B.27 - 2
Group Structure
B.27.2
Creation and Processing of Groups
Parts can be combined to form groups, and you can detach such groups by using the functions described here. All functions described below can be used equally for component part groups, subgroups and assemblies. This is why the functions are described only once. In the following, the term Group therefore is supposed to mean a material group, a subgroup or an assembly. It is also possible to store groups as block and to take them over into other drawings – the structure will remain unchanged. Please note that special functions are needed in this case. The AutoCAD standard commands for blocks cannot be used.
Create and Delete Click on this button to assign individual parts to groups. Click on the main part of the group and then select the parts to be assigned. The accessory parts to be assigned can also be selected in a field. The parts that may have been selected twice are ignored. Only steel or special parts can be selected for a group. Main Part Data
The parts list data of the main part are accepted as group data for the parts lists (not available for assemblies).
Page B.27 - 3
Group Structure
Display as 1 Part
The group is displayed completely as one coherent part after selection(not available for assemblies).
Click on this button to dissolve a group. To do so, click any part of the group. Click on this button to delete all parts of the selected group from the drawing. To do so, click any part of the group. Click on this button to add or edit the parts list data. After the group has been clicked, the following dialog opens:
You can enter the parts list data of the selected group in the input fields. The position in the field Posnum has been taken over from the main part provided the “Take Main Part Info” field was selected. In addition, the outer dimensions and the overall weight of the group will be displayed. These input fields can also be accessed via the context menu “Change PS Properties”, when you select a part that belongs to the group.
Page B.27 - 4
Group Structure
Processing of Structure Subsequent adding of parts to a group or removal from a group is possible as well. Click on this button to add new parts to a group. The complete group will be selected when you click any part of the group. Further accessory parts can be added by clicking them. Click on this button to remove existing parts from a group. The complete group will be selected when you click any part of the group. Then, remove the parts from the group by clicking on them.
Export and Import Click on this button to store a group as external block (like an AutoCAD-„WBLOCK‟) in a file. It can be inserted into another drawing by using Import Groups. The group structure will remain unchanged. The procedure is the same as the AutoCAD command “wblock”. When prompted select objects, click on any part of the group. Click on this button to insert a stored group into your drawing. The group structure will remain unchanged, when the field Explode Blocks after Insertion has been clicked, or if you explode the imported block using the command PS_EXPLODE. Do not use the standard AutoCAD command for this task! Complete Group
The complete group will always be exported, even if only one component part of this group was selected.
Dissolve Blocks
The inserted block is automatically exploded after the import of groups. The structure of the group remains unchanged.
Page B.27 - 5
Group Structure
Miscellaneous Click on this button to choose whether the whole group has to be selected by selecting only one part of the group, or whether the parts have to be independent of each other. To do so, click any part of the group. Then, the mode will be switched over correspondingly and the current status will be displayed in command line. AutoCAD group mode is modified here in the group. This means that you can select the whole group by clicking only one part when e. g.moving it by means of standard AutoCAD commands.. You can switch on or off this behaviour using the AutoCADcommand for groups. All groups existing in the drawing are counted and the number is displayed in the Number input field.
Page B.27 - 6
Group Structure
B.27.3
Check Groups
Using the commands available here you can check the created groups, make the settings and modify the group data for the parts list.
This function checks whether all the groups have a main part. When a group without a main part is detected, this group is dissolved. In addition, when using the command ‟Highlight Orphans‟ you can make display the parts that don‟t belong to a group. Groups without a main part may occur when the main part was deleted and the group has not been detached. Click on this button to downgrade a component part group to a subgroup. However, this material group mustn‟t contain any subordinated subgroups. Click on this button to upgrade a subgroup to a standard component part group.
Page B.27 - 7
Group Structure
Mark Orphans
If this field is checked, all valid groups are hidden according to the specifications when checking a group. Parts that belong to no group are marked in colour. Coloured markings are removed once you select the command „Regenerate‟ or when you assign the parts to a group.
Release Single Part Groups If this field is checked; all valid groups consisting of only one component part are released when checking a group. You can search different groups by highlighting and zooming found groups or by hiding the other groups. Enter the position numbers of the groups to be searched in the input field. Then, select the parts to be searched (in most cases, you will select all of the parts in one field) and confirm your selection by pressing the ENTER key or the right mouse button. In the selection list, you can specify how the result has to be displayed. Several position numbers can be entered at the same time, provided they are separated by a decimal point. Complete position areas must be separated by a hyphen. If you search e.g. the positions No. 5 and 7 resp. 17 up to 28, you enter the value 5,7,17-28 in the Search Numbers field. When you use the command „Regenerate„, the other groups can be made visible again resp. the marking in colour is removed. The position number of a picked component part is taken over in the preset field for search. Selection List
Here you select how the result of a search has to be displayed. Hide – All parts are hidden except the found parts. Zoom – The found parts are highlighted. Zoom Extents – The found parts are zoomed. Use this function to hide all parts of a group together (depending on the parameters for hiding). To do so, click any part of the group. When you use the command „Regenerate‟ or Display Parts, the parts of the group can be made visible again.
Page B.27 - 8
Group Structure
Use this command to make all hidden parts of a group visible again. Alternatively, you can also use the „Regenerate‟ function. Selection List
Here you select which parts of a group have to be hidden. Main Parts - only the main part will be hidden Single Parts - all accessory parts will be hidden. All Parts - the whole group will be hidden. Click on this button to make display the hierarchic group structure of a component part. To do so, you have to click on the component part. Then, a dialog opens which informs you about the belonging to and the status of the main part. In this dialog, it is possible to highlight the group structures in colour.
An independent component part group is created with all single parts not belonging to a group. Click on this button to compare two component part groups with each other. To do so, you have to select the two groups to be compared. Then, a dialog appears showing you the result in detail (see also „Positioning‟ function): Compare+Modify Component part groups having the same position number, which however are not recognized as identical at comparison, will be corrected. The position numbers are modified according to the settings of positioning (see also „Positioning‟ command).
Page B.27 - 9
Group Structure
Display in ProSteel-Properties When you process the parts of groups via the ProSteel properties and you change to the tab “Group”, the complete group will be highlighted in colour for your information. You can choose different colours for main part and accessory parts. Use the global settings of ProSteel to specify what colours to apply. When it is a matter of nested structures (such as e. g. the component part group of an assembly), you will normally get the lowest group level at shape selection – e. g. the properties of the own component part group. However, you may „scroll up and down‟ the structure and thus modify the parent group properties.
Page B.27 - 10
Group Structure
B.27.4
Settings
This page specifies the behaviour of the commands for group function. You can control the behaviour of each single command.
Part Selection
Here, you can specify the behaviour of part selection at the different functions. Multiple – Each part has to be selected separately. All – You select the whole group.
Execute in Loop
For the marked functions the command is repeated in a loop without having to display the dialog again after each run. Operation of the different functions is facilitated in case of several parts.
End Dialog
The dialog is automatically closed after the selected function is finished.
Page B.27 - 11
Group Structure
Page B.27 - 12
Positioning
B.28 Positioning Positioning of the existing parts is one of the last steps before final detailing of the 3D model for workshop drawings. ProSteel can do this automatically for you. It searches parts of the same type and defines their number in the model. Of course, you can also assign position numbers manually. In the first step before detailing, only the number of pieces (quantity) and their position numbers must be defined. This data record is the basis for the parts lists, which can then be generated and printed at once. Later, when preparing the 2D parts, the position flags with the user-defined layout are attached to single parts and groups. In this version, the position flags as well as the height indicators and weld marks are related to the style. This means that the pre-setting how the position flag looks like can be set with a style. This style specifies the geometry and the display properties of the flag.
Page B.28 - 1
Positioning
B.28.1
Automatic Positioning
Automatic positioning is an important means for the creation of parts list. Separate position numbers or shipping numbers according to your specifications are automatically added to component parts and groups via this function. You can even integrate additionally bought or own software (a so-called “Plugin”) into the positioning of ProSteel.
PlugIn
Page B.28 - 2
You can select a Plug-in to carry out positioning in ProSteel. This PlugIn carries out the positioning exactly according to the guidelines of your company if you don‟t find an appropriate setting in ProSteel. Activate it using the button „Use external PlugIn‟ and the automatic positioning then will be exclusively carried out by this external program and not by ProSteel.
Positioning
Type
Here, you enter the type of the position number. Numerical – The position numbers are composed of numbers only. Alphanumerical - The position numbers are composed of letters only. The order then is A, B, ..., Z, AA, AB, ... etc. Mixed - The position numbers are composed of a numerical and an alphanumerical part. The numerical part is following the alphanumerical part, the order is A1, A2, ..., A9, B1, B2 etc. The number of numerical positions can be preset under „Limits„.
Filter
If you want to position only certain component parts, you can apply a filter defining which elements of your construction have to be equipped with a position number or with a shipping number.
Last Single
Here, you see the single part position set last. At the beginning, you have to enter the value 0 at numerical position numbers, if you want to start counting at 1.
Last Subgroup
Here, you see the subgroup position set last. At the beginning, you have to enter the value 0 at numerical position numbers, if you want to start counting at 1.
Last Group
Here, you see the group position set last. At the beginning, you have to enter the value 0 at numerical position numbers, if you want to start counting at 1.
Last Assembly
Here, you see the assembly position set last. At the beginning, you have to enter the value 0 at numerical position numbers, if you want to start counting at 1.
Last Connection Here, you see the connection position set last. At the beginning, you have to enter the value 0 at numerical position numbers, if you want to start counting at 1. Next
Enter the single part position number that has to be added to the first part to be positioned anew.
Increment
Enter the automatic increase in numbers (normally the increment is 1).
Send Number
The automatic positioning either adds position numbers or shipping numbers. Use this button to select whether the function has to add position numbers or shipping numbers.
Page B.28 - 3
Positioning
Use XRefs
If external references have been inserted into the drawing, the component parts are also positioned in these external references.
Use PlugIn
If you have selected an external PlugIn for positioning, you can add it using this button. The internal positioning of ProSteel is deactivated in this case. Click this button to reset the settings of all fields to standard values. Click this button to make further specifications for seizing the shapes etc. Another dialog opens which will be described in detail in the following. Click this button to add the position number for the single parts, subgroups, groups and assemblies. For this purpose, you have to select the parts to be positioned. The program checks whether they are of the same type and adds a position number according to your specifications. Click this button to add only the position numbers for the single parts. Thus it is still possible to make some modifications before positioning the groups, if need be. Click this button to add only the position numbers for the groups. Of course, the position numbers for the single parts have to exist already.
Positioning Results When positioning is finished, a dialog opens where the position number and further parts list information is displayed for each part. Now, you can edit the proposed position numbers by doubleclicking the position number of the component part. Modifications are immediately adopted into the parts.
Page B.28 - 4
Positioning When single part positioning including the modifications is finished, the position numbers of the groups are placed. Double-clicking the position number in the column New Number can also modify the positions displayed.
Specifications for Positioning The pre-settings define how the automatic positioning of component parts has to be carried out. You determine which parts are equipped with a position number at all and according to which guidelines the positioning is carried out. If the proposed position numbers don‟t meet your requirements, you will find a solution here in most cases.
Filter and Sorting Page B.28 - 5
Positioning
Filter
These kinds of parts are taken into consideration during automatic positioning. Check all kinds of parts (standard shapes, special shapes, poly-plates, bolts, miscellaneous) that have to be equipped with a position number in one process. If you have added parts list data to any graphical elements, these are included via „Miscellaneous‟.
Connections
Can also be taken into consideration at positioning and get a so-called ID. Naming of the links (connections) is created with the options below.
Only with Names Connections are only positioned, if they have been named before.
Page B.28 - 6
Positioning
st
1 Sorting List
2
nd
Sorting List
Flats like
Here, you determine the order of positioning. The selected parts are sorted in the indicated order according to the type of component part (shapes, plates, etc.). Put the type of part that has to be positioned first to the top, the next type to the second position and so on. In the example dialog of positioning, all shapes are seized first, then all special shapes, and finally the concrete parts. If there are several parts of the same type, these will be sorted nd according to the settings for the 2 criterion. Change the order of criteria by using the arrow keys. Here, you specify a subordinate order. Within each part type, st sorted according to the 1 criterion, the parts will be sorted according to the order specified here. If you have e.g. seized more than one shape - with the settings of the example dialog - these shapes then are sorted according to the length first; if the length is identical, they are sorted according to the weight, and so on. Then, the special shapes again are sorted in the same way, etc. Flats (which actually are „shapes‟ as type of part) are treated like any plates at positioning. Therefore, they are displayed together with any plates when a parts list is sorted according st to the 1 criterion. Click this button to specify the criteria for the detection of identical parts by means of parts properties like name, note, etc. Then, another dialog opens where you can check the properties relevant for differentiation:
Page B.28 - 7
Positioning
Further Options Overwrite Exist… Existing position numbers are overwritten when assigning new ones. Equal Part De… Single parts are checked for equality. If they are identical, they are assigned the same position number. Parts are considered identical when deviations with respect to dimensions and drill diameter are within the values given as reference tolerances. Group Detection The groups are checked for equality as well. Groups are considered identical when identical single parts are arranged in the same mounting position. However, single parts are only compared using their position number because positioning has already been carried out before. If parts are identical but have different position numbers, the groups will also be assigned different position numbers. Subgroups, assemblies and connections can be compared with each other in the same way.
Page B.28 - 8
Positioning
Save Single Part Pos.No. When a single part, which already has a position number, gets a new position number at positioning, the existing position number is saved in the field OrigPosnum in the parts properties. Save Group Pos.No. When a group, which already has a position number, gets a new position number at positioning, the existing position number is saved in the field OrigPosnum in the group properties. Weld Marks
The attached weld marks are taken into consideration as well when the single parts are checked for equality. Weld cracks are small drill holes with parts that have to be mounted.
Include Subgroups Subgroups are completely included in the calculation of equality. Otherwise, only the main parts of the subgroups are used. First Main Part… First, all main parts of groups are positioned (and sorted according to the sorting criteria within the groups), followed by the accessory parts (also sorted according to the sorting criteria). This can be deemed as an additional, even higher ranking sorting criterion. If this field is checked and you have entered a position number in the input field Start Accessory Parts at, positioning of the accessory parts will start at the defined position number. You may for instance start with 1 for main parts and with 100 for accessory parts. Groups Differentiation:
When the group is assigned the position of the main part (normal case), it may happen that two different groups having the same main part are assigned identical position numbers. In such cases, the program will check in a second run whether or not the groups are really identical. If not, it will change the group position number.
Page B.28 - 9
Positioning 25 25.1 – The changed group positions are identified by the index „.1’ etc. following their position number (i. e. 100.1 , 100.2 , ...). 25 25A - The changed group positions are identified by the index „A’ etc. following their position number (i.e. 100A, 100B, ...). 25 MAX+1 – Positioning of the changed group positions is continued after the highest position currently assigned. When the last group was position 50, the changed groups now have the positions from 51 onward. Main Part Group The position of the main part is taken over as group position. If necessary, the group position is changed afterwards during second check. If this option is not requested, but you rather prefer a separate number area, the numbers will start at the position entered in Start Groups at. Individual Positioning of Subgroups Subgroups are individually positioned from the specified position number onwards. For assemblies, the value in the field below is valid.
Page B.28 - 10
Positioning
Prefixes Here, an explanatory text can be entered before the positions of groups, subgroups and assemblies. It is possible to differentiate between support beams, girders and other groups, the differentiation always being related to the main part of the group. Columns
Here, you enter the designation for all vertical shapes. In the attribute field Position Tolerance, you enter an angle within which the shape is still considered to be vertical.
Beams
Here, you enter the designation for all horizontal shapes. In the attribute field Position Tolerance, you enter an angle within which the shape is still considered to be horizontal. Vertical and horizontal are always related to the model, i.e., to the XY-plane of the WCS.
Other
Here, you enter the designation for all other groups.
Family Prefixes
The family classes prefix is set in front if the component part belongs to a family class and a prefix is planned.
Page B.28 - 11
Positioning
Tolerances to Recognize Equal Parts Geometry
At recognition via geometry, all outer edges of a component part are determined and individually compared with each other. In the following, you will find a description of the tolerances specifying that two parts are recognized as identical.
> Tolerances
Here, you specify the tolerances for recognition of identical parts via geometry. You can positively exclude that e. g. rounding errors in the case of bevel cuts or notches lead to different parts. Minimum Line Length - Lines up to the specified length are not considered for a comparison. Length Tolerance – Length deviations of two lines up to the specified length are not considered for a comparison. Drill Hole Tolerance – Deviations of the drill hole axes up to the specified length are not considered for a comparison. Weight Tolerance – Differences in weight between two component parts are ignored up to the indicated value.
Page B.28 - 12
Positioning
Volume
A second method to recognize equal parts is the real volume comparison. Here, you carry out a detection of identical parts based on the volume of the component part. The tolerances can be set for groups and single parts as relative value to the compared volume (e.g. 0.1 percent for component parts and 0.2 percent for groups).
Connections Names
These settings are used for naming the connections (positioned logical links). Consecutive Numbering – The connections are numbered consecutively. PosNum+PosNum – The name is built using a combination of the position numbers of the connecting and supporting shape. PosNum+Index – The name is built using the position number of the connecting shape and a continuous index. For more detailed information about connections, please refer to the main chapter of detailing.
Page B.28 - 13
Positioning
B.28.2
Manual Insertion
After a position number has been attached to the component parts, no matter whether it has been attached automatically or manually, you can display this number and further parts list information at the part using a position flag. If a position number has not yet been attached to the parts, you can specify new numbers and enter them into the part. The dialog tab mostly corresponds to the tab of automatic positioning. Please refer to this section for a detailed description.
Style
Select the style of the position flag to be inserted if no separate style has been specified for the corresponding part type (or the command). This is the standard style.
Type
Here, you enter the type of the position number. Numerical – The position numbers are composed of numbers only. Alphanumerical - The position numbers are composed of letters only. The order then is A, B, ..., Z, AA, AB, ... etc. Mixed - The position numbers are composed of a numerical and an alphanumerical part. The numerical part is following the alphanumerical part, the order is A1, A2, ..., A9, B1, B2 etc. The number of numerical positions can be preset under „Limits„.
Last Single
Here, you see the single part position set last. At the beginning, you have to enter the value 0 at numerical position numbers, if you want to start counting at 1.
Last Group
Here, you see the group position set last. At the beginning, you have to enter the value 0 at numerical position numbers, if you want to start counting at 1.
Last Subgroup
Here, you see the subgroup position set last. At the beginning, you have to enter the value 0 at numerical position numbers, if you want to start counting at 1.
Last Assembly
Here, you see the assembly position set last. At the beginning, you have to enter the value 0 at numerical position numbers, if you want to start counting at 1.
Next
Enter the single part position number that has to be added to the first part to be positioned anew.
Page B.28 - 14
Positioning
Increment
Enter the automatic increase in numbers (normally the increment is 1). Click this button to reset the manual positioning to standard values. Click this button to assign the corresponding position flag styles to the selection commands described below. This style describes the depiction of the position flag, i. e. which information is depicted in which way. Then, the following dialog appears, the assignments of which are self-explanatory.
Scale
Enter the scale for display scaling of the position texts and other things. The scale should correspond to the scale of the detail. If a global scale has been defined, it will be automatically taken over here.
Paper Area
Here, you specify whether a position flag has to be created in the paper area.
Shipping No.
In ProSteel, you have the possibility to add a position number and a shipping number to a component part. If this option is activated, the shipping number will be displayed in the position flag.
Enter
The number specified here will be taken over as position number or as shipping number into the parts properties.
Page B.28 - 15
Positioning
Attach Position Flag Different selection commands are available for attaching the flag. The corresponding position flag style of the pre-settings is assigned to the commands.
SINGLE PART Select the part to which a position flag has to be attached. Then, the position flag is created with the set style for single parts. GROUP Select the part to which a group position flag has to be attached. Then, the position flag is created with the set style for groups/subgroups/assemblies. GROUPS-SINGLE PART Select the part of a group to which a position flag has to be attached. Depending on the part hierarchy, the position flag is created with the set style for main part or accessory parts. BOLT Select the bolt connection to which a position flag has to be attached. Then, the position flag is created with the set style for bolts. SHORT POSITION Select the part to which a position flag has to be attached in form of a short position. Then, the position flag is created with the set style for short position. MOUNTING POSITION Select the part to which a position flag has to be attached in form of a mounting flag. Then, the position flag is created with the set style for mounting.
Page B.28 - 16
Positioning
FREE Select the insertion point to which a position flag has to be attached. Specify the position flag properties such as style, position number, etc. in the following dialog.
Attaching the position flag via FREE permits you to create position flags even without direct reference to a component part. You can make use of this option e.g. for position flags in 2D drawings the parts of which have been dissolved or drawn manually.
Page B.28 - 17
Positioning
B.28.3
Automatic Insertion (Distribution)
This command serves for automatic distribution of position flags in views or in detail drawings. The properties stored in the component parts are displayed in a position flag according to the set style.
Scale
The scale specifies the size of the position flags to be entered. If e.g. the text height in a position flag style is indicated with 3,5, the position flag will be created with a text height of 3,5 * scale.
Shipping No.
The shipping number is selected instead of the position number of the part and entered into the position number.
Paper Area
The distribution is made in the paper area and the position flags are created there. Click this button to start the automatic distribution of position flags. Select the parts to which position flags have to be attached. Then, the program starts distribution. Click this button to exchange the position of two flags.
Click this button to make further specifications for automatic distribution.
Page B.28 - 18
Positioning
Options for Distribution Specify the pre-settings for the automatic distribution of position flags by clicking this button. You can define the position flag styles and different optimizations.
Page B.28 - 19
Positioning
Selection list
Here, you specify to which parts position flags have to be attached. After having selected a part type, you can choose a position flag style for this part type which has to be used to display the flag. No group sub parts means that group sub parts are not given a position flag. This is equally valid for subgroups and assemblies.
Distribution Don‟t care about collision At distribution the position flags are placed on the component part without verifying the surroundings of the part. This is the fastest distribution method, however the most inexact method as well. Iterations
This value indicates how often a new position has to be searched for a position flag. The higher the value, the better the positioning result will be, but the longer the search for a suitable position of the position flag.
Insertion Point
The minimum distance between the insertion point and the end of the position flag‟s guideline
Local Centre
Your model is divided into different positioning sections with so-called local centres. The position flags are arranged in a circle around these centres and inserted. This value sets the minimum distance between two local centres.
Offset Flags
This value indicates the projection of the flag beyond the edge of the visible geometry.
Free Hold
This value specifies the minimum distance between two neighbouring position flags.
Flag Angle
In this field, you specify how the position flags have to look like. The angle is measured between the guideline and the alignment of the text of the position flag. The angle is always indicated as angle area, because an exact angle specification cannot be carried out with distribution algorithm.
Number of Shape Sections For long shapes you can specify on how many positions except the center of the shape position flags have to be placed. At the value 0, the position flags are placed on the center.
Page B.28 - 20
Positioning
Compare Radius Here you specify the radius to be used for verifying the current position flag with regard to collisions with existing part geometry, position flags, elevations, texts or dimension texts. The bigger the value, the longer is the processing time. Options One Part per…
Only one position flag is inserted for a part having the same position or shipping number (depending on the setting).
... per Centre
Only one position flag is inserted with the same position or shipping number (depending on the setting) for each local centre in the drawing.
Place Only Out… The position flags are attached outside of the model geometry. Break Lines At
The guidelines are interrupted in the case of collisions with dimensions or texts.
Animation
You can follow positioning procedure on screen if this option is activated. This may require a lot of time in case of bigger models and cannot be interrupted.
Group Flags
Position flags referring to parts with identical position or shipping number are arranged to form a common flag. The insertion points mustn‟t exceed the maximum distance to form a group.
Group Distances The maximum distance up to which identical parts can be arranged to form a group. Guideline
A separate guideline to the flag is created for each identical part of a group.
Show Count…
If you have arranged position flags to form a group, you can select which number of parts has to be displayed in the „Part Number‟ of the flag. Normally, the sum of the combined parts is inserted. However, you can alternatively enter the entire number of all parts in the model having this position number.
Page B.28 - 21
Positioning
Distribution Procedure The distribution of position flags takes into consideration the geometry of the component parts, texts and dimensioning objects. At first, distribution searches for the geometry within the compare radius around the insertion point of the position flags. Then, the position flag is created and placed on its origin. If the distributor doesn‟t find an appropriate position of the position flag (in case of collision), the flag is moved at shapes along the centerline of the shape and a new insertion position is searched where no collision with existing geometry takes place. If there is still no appropriate position for the position flag, the flag will be created at a greater distance towards the insertion point i. e. the guideline is extended. If there isn‟t any appropriate place for the position flag, it will be placed at the originally destined insertion point (center of the shape). Working off flag distribution happens according to part size. First, the flags for the small component parts are created and then the rest of the flags in ascending order. Distribution algorithm may be switched off using the option „Don‟t care about Collision‟. Flags for Main Parts and Groups Different kinds of depiction are possible when a flag has to be attached to the main part of a group or to the corresponding group. Since the settings are more complex, we will display the combinations here. 1. A “normal group flag” is attached to the main part, containing the data of the corresponding construction group.
Page B.28 - 22
Positioning
2. A group flag is attached to the main part, however containing the single part data of the main part.
3. A single part flag is attached to the main part, containing the single part data of the main part and a group flag, containing the group data is attached to it as
well. 4. A single part flag is attached to the main part, containing the single part data of the main part and a group flag, containing the data of the main part is attached to it as well.
5. No flag is attached to the main part.
Page B.28 - 23
Positioning
6. A normal single part flag is attached to the main part.
The default settings for subgroups and assemblies can be carried out similarly like the settings for groups.
Page B.28 - 24
Positioning
B.28.4
Other Auxiliary Commands
Here, you will find different commands for processing the position flags and for checking or searching for the position numbers.
Use this button to search for the highest group or part number in the selected component parts. The result is displayed in the neighbouring input fields. Click this button to search for component parts in the model. Enter the position you are looking for in the field Search Number. Use the options Hide, Check, Zoom Extents to select how the found result has to be depicted in the model. Use this command to delete position numbers in component parts and groups. For this purpose, select the parts the position numbers of which have to be deleted. You can specify in which part the number is deleted using the filters Single Parts and Groups. This command enters the current position number of the part as original position number. The original number can only be modified using this command. Use this command to add a second part to a common position flag.
Use this command to remove the arrow to a component part from a position flag.
Page B.28 - 25
Positioning
Use this command to interrupt the guideline of a position flag by specifying two points e.g. to not overwrite a text. Only one interruption per guideline is permitted. Use this command to remove the interruption from the position flag‟s guideline. Use this command to take over the current part properties into the position flag. Use this command to look at the position numbers of the selected parts and to modify them. Press the ALT-key when loading the command to call the function for editing the position numbers of the group. When you press the STRG-key at component part selection, component parts without position number will be displayed in the dialog for processing as well. Use this command to compare two parts with each other. Select the two parts and the result is displayed in a dialog box.
Here, you see two results for comparing the position. In the left figure the parts are identical. In the right one they are not identical. In the dialog window, you can see in detail where the parts differ from each other.
Page B.28 - 26
Positioning
B.28.5
Add Drawing Number
The drawing number of the workshop drawing can additionally be integrated as prefix or postfix into the position number (e.g. Pos 1234 – 100). In case of big projects, this permits a better identification of the component parts. The drawing number is added in a separate step after detailing, when the drawing numbers of workshop plans are knows and primarily serves for the depiction in overviews.
Default Format
Specify the default format with variables so that you can add additional text. $(DWGNUM) for the drawing number $(DWGIDX) for the drawing index
Position
Here, you specify whether the drawing number has to be entered as prefix or as postfix of the position number.
Single Parts
The drawing number of single parts is taken over into their position number.
Groups
The drawing number of groups is taken over into their position number.
Shipping No
The drawing number is taken over into the shipping number instead of into the position number. Click on this button to modify the position numbers. In order to do so, you have to select the component parts.
Page B.28 - 27
Positioning
B.28.6
Depiction of Position Flags
You determine the depiction of a position flag by specifying a position flag style where the geometry, the content and the colours of the position flag are defined.
Style
Use this box to select the style you want to use for the depiction. Click this button to save the current settings.
Click this button to load templates via the templates management and to use them again.
Create Geo...
The depiction of position flags is specified in this dialog by preset parameters.
Block Geometry The depiction of position flags is specified by an AutoCADblock. You can select any block you like. Block Path
In this field, you define from which path the blocks for selection of position flag geometry have to be read.
Bitmap
You can set a separate bitmap for a style to facilitate the recognition. This bitmap then is displayed in the selection box as well. Click this button to set the defaults of the depiction.
Page B.28 - 28
Positioning
Settings for Depiction
Geometry Line Type
Here, you define the kind of guideline to be used. None – No guideline will be displayed. Line – Only one line will be displayed. Arrow – A line with an arrow will be displayed. Point - A line with a point will be displayed. Block – A line with any block at the starting point will be displayed.
Line Block
Here, you can select the AutoCAD block, if you have activated the option „Line with Block‟.
Bubble Form
Here, you define the kind of position number. None – Only the number is displayed. Round – The number is displayed in an oval. Rectangular Bubble – the number is displayed in a field. Hexagonal Bubble – The number is displayed in a hexagon. On Line - The number is displayed on the construction line.
Page B.28 - 29
Positioning
Text Type
Here, you set the type of shape designation in case of length indication. U100..160 - The designation is as follows IPE270..7890. U 100 160 – The designation is as follows IPE270–7890. U100x160 - The designation is as follows IPE270x7890. Format Template – The designation is as indicated in the „Format Template‟ input field.
Alignment
Here, you determine the direction of the construction line with respect to the position text. Shape – The alignment is parallel to the shape. Line – You are prompted to enter a reference line by clicking. The text will be aligned accordingly. Horizontal – The alignment is in horizontal direction. Vertical - The alignment is in vertical direction.
Text Style
Specifies the text style for the text of the position flag.
Default Format
Specifies the format for the user-defined shape designation if you have selected „Format Template‟ as text type. The following parameters are available. $(N) for part name $(L) for part length $(W) for part width $(T) for part thickness The result of the format string $(N) $(T)x$(W) would e.g. be plate 5x380.
Prefix / Postfix
In the input field Prefix or Postfix you can enter a text which is displayed in front of or after the position or shipping number of the position flag. The default can be set independently of each other for both numbers.
Separator
Specifies a text which is written between position number and shipping number, if both numbers have to be displayed as position number entry in the position flag.
Page B.28 - 30
Positioning
Layout
Here, you determine which part information to be displayed in the position flag. Total Number – The number of these parts is displayed, e.g. 17 x IPE 270. Part Name – The designation is displayed (e. g. the shape designation). Comment – The comments of the parts list information are displayed. Length/Scale – The length in the selected text type is displayed. Position Number – The position number is displayed. Shipping Number – The shipping number is displayed. Material – The material designation is displayed. Item Number – Any existing item number is displayed. Orig. Posnumber – The fixed (former) position number is displayed.
Options No Line
No line is drawn beneath the text of the position flag.
Dynamic
The depiction of the position flag is dynamically adapted to the current view.
Length For Group The entire length of the group is output instead of the part length. Sizes
Here, you define the text sizes in mm for general lettering (Text Size) and for position numbers (Pos. Size). For printing, the AutoCAD text sizes are scaled according to selected scale.
Colours
You set the corresponding colour for the flag as AutoCAD colour number using the fields Line, Number, Bubble und Text. If you enter -1 as value, the pre-setting will be used.
When you click a position flag via the context menu „Change PS Properties‟, you can subsequently modify the properties of each single position flag. This tab will not be described here in detail because the possibilities for setting correspond to the parameters explained above.
Page B.28 - 31
Positioning
B.28.7
Management of Styles
In this part of the dialog, you maintain your position flag styles. You can create new styles, load , update or delete styles.
Use the displayed button to create a new position flag style. The style will be stored as *.sty-file together with the presettings in the directory for position flag styles. Now you can work with this style on all other pages of this dialog. If you want to work with a special style which is not stored in the drawing but on the hard drive, you can load this style using this button. Select the corresponding *.sty file in the directory of position flag styles and load the file. The style will be available at once. Use this command to remove a style that you don‟t need any more in the drawing.
Page B.28 - 32
Positioning
Click this button to change the display order. The display order of the style list is not sorted. You can specify the order yourself. For this purpose, use the two arrow keys to move the checked style up or down in the order. If you want to update the styles loaded in your drawing, use this function. Now, all styles in the drawing are replaced by the styles stored on the hard drive.
Page B.28 - 33
Positioning
Page B.28 - 34
Drawing Information
B.29 Drawing Information When using this command, you can add drawing information to your drawing. This information will be directly taken over into the parts list. By this way it is also possible to fill in the title block of 2D drawing when having entered a drawing border by means of „Drawing Border‟ command. Always enter the order drawing number and the modification index, if present, since this information is evaluated during the 2D detailing process. You can later query the Detail Centre to find out, which drawing contains the parts and will receive the file path as well as the probably more useful drawing number.
All Text Fields
In the different text fields you enter general information on the project and on the drawing. Since these fields are selfexplanatory, they are not explained in detail.
Project Name
Here, you select a block using the SELECT button for entering data in its block attributes via the entry fields, provided you have assigned such entry fields to the variables of the block attributes. When the drawing border for the 2D workshop drawing has been entered as block using the ProSteel command „Drawing Borders‟, you can select the block of the drawing borders. The entries may either be taken over into the title block (export), or the entries can be taken from the title block into the dialog (import).
Page 0 - 1
Drawing Information Click on this button to retrieve the data of the entry fields into the block attributes of the selected block. Click on this button to retrieve the block attributes of the selected block into the entry fields.
Click on this button to define the variables assigned to the block attributes of the different entry fields. An identical dialog box will be displayed, where the variable names of the block attributes are entered. When you have selected the Prepared On, Checked On, or Released On fields and click this button, the current date will be entered
Page 0 - 2
Create Part Lists
B.30 Create Parts Lists After having positioned a model or a detailed workshop drawing, a parts list can be created based on the part data. The creation of parts lists by ProSteel is divided into two sections, i.e., the actual creation of the list of materials on the basis of the parts, and the processing of the list of materials for a printout. By separating these two functions, the data of the parts lists is also available to other programs. For „Creating the Parts Lists‟ a file is written in the dBASE format as a *.dbf file. This database format is compatible with many other applications. You can import, further process and read out the file (in this case, this would finish the work on the parts lists by using ProSteel). As a matter of fact, ProSteel also provides the most important functions for processing and reading out of the data according to your requirements with the ‚Processing Parts List‟ command. In fact, you need no further programs but you have the possibility of using them. This is the reason for separating the two functions.
Page B.30 - 1
Create Part Lists
B.30.1
Register Parts Lists
When creating a parts list, you first select the parts to be processed, preferably parts of a group or, in addition, independent single parts. You can decide whether or not parts of your selection are to be included in the list - either collectively via the filter function during creation of the parts lists or individually for each part. If the „Select‟ button has not been clicked in the corresponding parts properties, the part will not be included in the parts lists, even though you have selected it. Since further processing and printing of the parts list is carried out with an extra function, you can register all required parts lists first and store them under different names.
Part Selection
Group Options
Page B.30 - 2
Here, you select the parts on the basis of which a parts list is to be created. 3D-parts – you select the parts from the model. 2D-position flags – the parts list will be deducted from the position flags of a detailed workshop drawing. From modified 2D drawings you can generate new bills of materials.
Create Part Lists
Verify Position... Only those selected parts will be taken over into the parts lists that have a valid position number. Only Group Parts Only those selected parts will be taken over into the parts lists that are assigned to a group. Subgroups
Subgroups are included when the group structure of the parts list is created.
Assemblies
Assemblies are included when the group structure of the parts list is created.
Only Selected
Only the selected parts are taken over into the parts list.
Create Group Entry A group entry is written into the parts list only for completely seized groups. Start Part List
Parts list processing is started immediately after creation of the parts list file. You needn‟t use this function separately if you want to continue your work directly.
Calc. NC-Cut..
The angle of intersection is calculated by ProSteel according to the NC-guidelines of the DSTV.
Straight End
The parts are rotated that the straight end is situated at the front.
With Welds
Information about welds is written into the parts list file.
Combine Welds Identical welds are summed up to one single entry. XRef
The selected XRef-objects are included when the parts list is created.
Group Bolts Bolts without ...
Bolts will be included in the parts lists, even if they have no position number.
... Extra
The additional parts for the bolts are separately specified in the list of materials.
Without Weight
Bolts are imported into the parts list without indication of weight.
Output File
The file for the list of materials is stored in the file displayed in the Name field in „dBASE-format‟. By clicking the FILE button you can set the directory in the same manner as you use to do under Windows.
Page B.30 - 3
Create Part Lists
Dialog-Commands WITH BOLTS By clicking this button, you start part selection. The selected bolts will be considered as well. WITHOUT BOLTS By clicking this button, you start part selection. Bolts will not be considered, even though they have been selected. MOUNTING LIST By clicking this button, you start part selection. Only the main parts of groups including bolts will be considered.
Importing the Parts If you select the command for the first time, a display field with drawing information will be displayed. You should complete it already, since in this case the information on drawing numbers will be known for all entries in the parts list (see ‟Drawing Information‟). After having set the filters and selected the function concerned, the program will check whether or not the specified file for the parts lists already exists. If the file already exists, you are given a warning, and you can decide whether to overwrite or to cancel the function. Then you select the parts to be imported. You can select all parts, since only the defined type of parts will be imported. You also have the possibility of manually excluding parts. For checking purposes, all parts imported into the parts lists are hidden. Using the command ‟Regenerate‟, you can recall them again. Hint: If a part is not imported and should have been, use the context menu “Change PS Properties“ to check if the “Takeover“ button was not clicked.
Page B.30 - 4
Create Part Lists
B.30.2
Process Parts List
After you have created one or several parts lists using the command „Create Parts List„ you can further process the bills by using this command. The files of the parts list can be loaded, modified, formatted, and printed using this command. The substantial form generator makes it possible to freely design the formatting and layout of any parts list, add company logos, and preview the parts lists. You do not need any special knowledge about this utility since its normal operation is smoothly integrated into ProSteel's program environment. However, if you would like to customize the enclosed parts list forms to your individual needs, please read the online help of the form generator “List & Label Designer”, which will explain the customization of existing and creation of new forms in easy to understand steps. The following sections will describe how to generate and output a parts list first before discussing the individual options of the parts list processing method.
Page B.30 - 5
Create Part Lists
Parts List Output
In the FILE menu click the menu option OPEN FILE and select the *.dbf-file you want to process. The directory and the file name should be known to you (have been previously defined with the command „Create Parts List„). The dialog box now fills with the parts list data. Each part (even construction group descriptions) is listed individually and unsorted; equal positions are not combined until the time of output. If there is an error in the parts list file (such as for example components with the number=0 or different parts with the same position number) the program creates and opens a file named stkerr.dbf where these errors are displayed. These parts won't be listed in the standard parts list. In the SETTINGS menu, click the menu option SET PARTS LIST HEADER and then enter the data for the parts list header. If you have defined order data previously (command „Drawing Information„), these data can be imported into the parts list header. Finally, click the OUTPUT menu and select the parts list variation (e.g. parts list of individual parts), which you would like to print. Depending on the settings, the program now prompts you for the layout for the parts list formatting and can then generate a print preview. All or specific pages are printed from within this preview.
Page B.30 - 6
Create Part Lists
Preview Here, you can see an overview about the most important functions required for printout and navigation within the preview. As the actual printout is completely taken over by the additional application “List & Label”, please refer to the online help of this program for more detailed information.
Page selection
Zoom
Print page
Print All
Exit
Other Output Targets You can, however; also directly print the parts list without preview or you can convert it into other formats like e. g. the Rich-Text-Format (RTF). To determine the output target, select in the output dialog of “List & Label” under Output on ... the desired target in the selection list and click on START afterwards to output the parts list.
Page B.30 - 7
Create Part Lists
Parts List Processing Main Window If you select this command, the main window for the parts list processing will open – first without any entries. This dialog has its own program menu offering you most of the utilized commands for this command. If you have selected one or several files for processing via the menu „File„, the window will show the following information. The left column displays the currently open files. Clicking a file name makes this file your current working file and all components of that file – mostly unsorted – are listed in the right list of the dialog.
The component parts list offers only a draft display of the entries. By doubleclicking an entry, another dialog opens listing all parts lists data for this entry. You can modify any data at this point, which are saved in the corresponding file immediately once you exit the window with the OK button. This means you are not working with just a working temporary buffer copy but with the actual file!
Page B.30 - 8
Create Part Lists
Function Selection Menu Option FILE Open
By clicking this button, you can open one or several files of a parts list for processing. The open files are displayed in the list on the left of the main dialog. When being clicked, the selected list becomes the current working file.
Delete
By clicking this button, you can delete a stored file.
Close
By clicking this button, the current working file is closed and removed from the list.
Sort
By clicking this button, you can sort the current working file according to two layers of a parts list in an ascending or descending order. For this purpose, a further dialog box will be displayed, where you can select a primary and a secondary layer. The data will first be sorted according to the contents of the primary layer and then, in case of equal contents, according to the contents of the secondary layer. Data content is modified according to the sorting.
Cancel
By clicking this button, the parts list processing is terminated.
Function Selection Menu Option DATA RECORDS Add
By clicking this button, you can manually add a new data record to the end of the file. An empty dialog box will be displayed; where the parts list data can be entered.
Delete
By clicking this button, the data record currently selected in the part list on the right will be deleted from the file.
Add from File
By clicking this button, you can add the data of a second parts list file to the current working file. You have to select an additional file. Please note that the content of the current file is permanently changed when using this option!
Page B.30 - 9
Create Part Lists
Function Selection Menu Option SETTINGS Definition
Click this option to edit an existing print layout or create a new one. The print layout specifies which parts list data to print in what format. You can freely design your layout and also add text and logos. The following dialog box opens where you can edit the template:
Now you will see a list with the existing form layouts in the form of templates as well as a description and preview of the form. If you would like to edit a form just double-click the file name and the utility program „List & Label“ (see intro to this chapter) opens. A detailed description of the functionality would extend beyond the scope of this manual. Please see the online help of this utility program for further details. If you would like to create a new form, enter a new file name, which will return an empty form ready for editing. List Header
By clicking this option, you can edit the header of your parts list. The program will give you first the opportunity to import data from the drawing information (see command „Drawing Information„) into the parts list header.
Filter
Click this entry to set the filter conditions if you want to output a parts list with filtered data Only data meeting the filter condition are output in the parts list.
Page B.30 - 10
Create Part Lists
List Names
By clicking this button, you can preset standard print templates for single part, group and bolt lists. A dialog opens where you enter the print template files to be used as standard selection. You can also select these files by a File Selection Dialog. In addition, you can switch off error check here.
If the field Switch off Posnum Equal Part Detection has been checked, their position number only recognizes identical parts. If this field has not been checked (recommended), the parts are additionally compared with regard to name, length, etc. If these values don't match for component parts having the same position number, an error message is created.
Page B.30 - 11
Create Part Lists
Function Selection Menu Option OUTPUT Group List
Click this entry to output a construction group list. If you have imported parts using the ‚Assembly List„, you should select this output format. If you used the command „Create Parts List„ to import parts that do not belong to a group, these parts are added to the list. After selecting the command, you have the option to change the current Windows system or default printer. The data is now formatted according to the selected standard template (see ->„Preselection Parts List Names) and, if desired, presented in a preview before. You can now print the list. Please note that the selected form also fits a construction group list. Of course, it is possible to print a group list with a list form for individual parts but this output might not meet your expectations. Also remember that only those parts can be printed, which have been defined/imported previously (command ‟Create Parts List‟.
Single Parts
Click this entry to output a list featuring individual parts. The remainder of the process is the same.
Bolt List
Click this entry to output a bolt list. The remainder of the process is the same.
Filtered List
Click this entry to output a list featuring individual parts, with only those parts that match the current filter conditions. Use the command „List Definition/Filter„ to set these conditions. The remainder of the process is the same.
Free ...List
By clicking on one of these three entries the corresponding parts list will be output. The proceeding is identical with the group list. The only difference is that you have to select a format template here instead of using the set standard template.
Page B.30 - 12
Create Part Lists The following figure shows you an example of an component part group list displayed as preview in “List & Label”:
Page B.30 - 13
Create Part Lists
Page B.30 - 14
Drawing Parts List
B.31 Drawing Parts List B.31.1
Parts List Creation
This command permits the creation of a parts list and its output in the drawing. Therefore, it is suitable for drawing-dependent parts lists in plans showing e.g. only one single group. Since this parts list is an "intelligent" object, modifications in the model can be automatically seized and displayed in the parts list. In addition, various formatting options are available which can be controlled directly. After having selected the command, select the desired parts first and then determine the desired insertion point of the list in the drawing by clicking a point. Then the following dialog appears where you can make the basic settings.
Page B.31 - 1
Drawing Parts List
Style
Here, you select the name of the output style. This output style specifies the appearance of the output, i. e. which values are displayed in which lines, the size and position of the columns, etc. The „Standard‟ output style is created by the program and therefore is always available. You can create and manage as many styles as you like. Here you select a style and thus restructure the list by selecting a list entry.
Origin
Here, you select whether the data have to be taken from normal 3D component parts or from 2D position flags.
List Type
Select the type of parts list here. Single Parts List – An own entry is created for each element. The data don‟t have any reference to each other; the quantity of output parts corresponds to the seized parts. The determined number of groups is not (!) taken into consideration for selection. Group List – Output as group list; here the data are output separately according to groups and the quantity of single parts is output as parts per group. Dissolved Group List – A "real" single parts list is output taking into consideration the number of parts depending on the quantity of the corresponding group.
Insertion Point
Here, you specify the position of the parts list related to the previously selected insertion point.
Tolerances
This value indicates in which tolerance ranges the length of component parts is compared and considered as identical.
Scale
The scale of the output is specified. The size of the complete list output can be increased or decreased.
Current Layer
If this button is activated, the list is generated on the current layer. Otherwise, it is generated on the layer specified by PS_TEXT in the configuration.
Autom. Update
If this button is checked, ProSteel is controlling all activities with regard to their influence on the parts list. When you delete an element or you modify the size of an element adopted into the parts list, the list will be calculated anew and updated. Please note that this option may require some time for calculation. Therefore, you should thoroughly consider whether you want to make use of this possibility and risk the inconveniences of speed. You have always the possibility to update the list manually.
Page B.31 - 2
Drawing Parts List
Check Position... If this option is activated only parts having a valid position number will be evaluated. Only Groups...
If this option is activated only parts belonging to a group will be evaluated.
Total Amount...
If quantities are used, the total amount will be displayed.
Number*Quantity Groups The displayed amount results from the number of parts in a group multiplied by the quantity of these groups in the model. Total Amount at Total Values If total values have to be used at output, the total amount instead of the number is used at calculation. Bolts...
If this option is activated, bolts having no valid position number will be evaluated as well.
Washers...
If this option is activated, washers will be evaluated and listed as separate parts.
Nuts...
If this option is activated, nuts will be evaluated and listed as separate parts.
Safety Nuts
If this option is activated, safety nuts will be evaluated and listed as separate parts.
Wedge Washers... If this option is activated, wedge washers will be evaluated and listed as separate parts. Without Weight
Bolts are displayed in the parts list without indication of weight.
Welds
Welds are displayed in the parts list.
Add...
Identical types of welds are added in the parts list to a common length. Click on this button to add further component parts to the component parts list of the parts list. You then have to select the parts to be added. Click on this button to remove component parts from the component parts list of the parts list. You then have to select the parts to be removed. Click on this button to calculate anew and update the parts list. Here, you can force an update of the list if the automatic update option has not been activated.
Page B.31 - 3
Drawing Parts List B.31.2
Processing of Parts List Styles
Move to the second tab “Display” to edit a new created or existing parts list style and select the style to be edited. EDIT Click on this button to edit the selected style.
Edit List Properties In the display list you can see any kind of information, such as e.g. which columns are output in which order and with which settings in the parts list. In addition, you can make general settings concerning the list format.
Page B.31 - 4
Drawing Parts List
Style Name
The name of the current style; all modifications are related to this style.
Display List
Here, you see an overview of all displayed columns of the parts list. They are displayed in this order from the left to the right in the drawing parts list Click on this button to modify the line selected in the display list (parts list column). Then, another dialog opens. Click on this button to add a new line (parts list column) to the end of the list. Then, another dialog opens. Click on this button to add a new line (parts list column) in front of the checked line. Then, another dialog opens. Click on this button to delete the selected line (parts list column) from the list. Click on this button to save the parts list style. Please remember to save the style after modifications; otherwise all modifications will be lost. Click on this button to modify the formatting of the summated text of the parts list. Then, another dialog opens.
Text Size
Determines the text size in drawing units at a scale 1:1
Height Scaling
Increases the height of the lines in question by a factor. Depending on the text style, the readability of the parts list is increased.
Left Margin
Distance of the signs to the left margin at left-justified insertion.
Right Margin
Distance of the signs to the right margin at right-justified insertion.
Offset
Distance of the group list entries of group parts to the main part.
Rotation
Rotation of the whole list by the indicated degrees
Block Size
Indicates after how many lines a horizontal line has to be inserted. This only serves for a clearer overview.
Move Up
If this field is checked, the list is running from the bottom to the top, i. e. the column headers are below.
Divide Groups
At group lists, the groups are divided by horizontal lines. The settings under 'Block Size' don‟t have any influence in this case.
Align Numbers
All numerical values are aligned to the right margin.
Page B.31 - 5
Drawing Parts List
Fill up with Noughts All numerical values are filled up with noughts according to the indicated format length and digits after the decimal point. Header
The header of the list is taken over to output.
Text Style
Select the desired text style. Please refer to the AutoCAD manual for more detailed information about AutoCAD text styles.
Sort
Depending on the field selected here, the output is sorted in rising order from the column header onward.
Invert
Causes a sorting in descending order from the column header onward.
Use Prefix
At sorting, the entries are separated in prefix and number and then sorted separately.
The display colours can be globally selected for all elements of the parts list. In addition, individual colours can be assigned to the different columns as well. Enter the colour directly by indicating the AutoCAD colour number or click on the desired input field and then on the SELECT button. Then, you can select the colour in the dialog as usual. Header
Colour of column headers
Label
Colour of column texts
Frame
Colour of list frame
Hor. Lines
Colour of the horizontal separation lines of the list
Ver. Lines
Colour of the vertical separation lines of the list
Page B.31 - 6
Drawing Parts List
Processing of Column Properties Each column of the parts list styles can be adapted and formatted in many different ways. After an entry to be modified or created has been selected in the display list of parts list format dialog, the following dialog opens:
Field Name
Select the desired field from the data fields.
Name1
The name of the column header resp. the first name if an entry has been indicated in input field „Name2‟ as well. Two rows are available altogether.
Name2
The second name of column header.
Length
Here, you enter the desired column width in text signs. The exact column width depends on the selected text style.
Dec. Point
The number of desired positions after the decimal point.
Text Size
Enter the text size of the column. If you have entered the value 0, the general text size of the list style is used. Enter the colour of the column text (colour number). If you have entered the value -1, the text colour of the list style is used.
Page B.31 - 7
Drawing Parts List
Position
Enter the alignment of the column: Left, Center, Right or Automatic. If 'Automatic' has been selected, all texts are aligned to the left and all digits are aligned to the right.
Units
Enter the unit format Metric, Imperial or Automatic. If 'Automatic' has been selected, the default units of the drawing are used.
Process Sum Text Block The overall weight or similar data can be indicated in a sum text block (foot lines), which can be output below, or above the parts list. Up to ten lines are available for that purpose where you can insert additional variables, which then will be replaced by the current values.
Page B.31 - 8
Drawing Parts List
Footer
Enter the desired foot lines. You can use pre-defined variables as well. The following variables are available as foot lines: $(N)
The number of lines is indicated.
$(F)
Multiplication factor addition in %
$(L)
Overall length of all parts without addition
$(LF)
Overall length of all parts with addition
$(W)
Overall weight of all parts without addition
$(WF)
Overall weight of all parts with addition
$(P)
Overall area to be painted of all parts without addition
$(PF)
Overall area to be painted of all parts with addition
Addition
Percentage by which the determined values have to be increased. These increased values can be output by means of the variable $(xF).
Dec. Point.
The number of desired positions after the decimal point.
Offset
The distance to the corresponding margin. Enter the colour of the text (colour number). If you have entered the value -1, the text colour of the list style is used.
Position
Enter the alignment of the text: Left, Center, Right or Automatic. If 'Automatic' has been selected, all texts are aligned to the left and all digits are aligned to the right.
Units
Enter the unit format Metric, Imperial or Automatic. If 'Automatic' has been selected, the default units of the drawing are used.
Group Row
In the Prefix input field, you can indicate a prefix for the position numbers of group lines. In the Colour input field you can specify the colour of the group line. If the value -1 has been indicated here, the normal text colour will be used. These settings can be made separately for groups, subgroups and assemblies.
Page B.31 - 9
Drawing Parts List
B.31.3
Management of Parts List Styles
The management of the existing parts list styles is organized in the third tab “Order”.
Click on this button to load the selected style from the hard drive into the drawing. Click on this button to create a new list style. To do this you have to enter a style name (please pay attention that the name does not exist already). Then, this style is created with the settings of the style, which is current at the moment, and it will be used as new current style. The settings of the style can be individually modified afterwards. Click on this button to create a new folder for a clearer structure of your parts list styles.
Click on this button to delete the selected style.
Page B.31 - 10
Drawing Parts List
B.31.4
Processing the Content of Parts List
Move to the forth tab “Content” to look at the content of the parts list and to modify it manually. To modify an entry, double-click the corresponding field and you can edit the entry.
Page B.31 - 11
Drawing Parts List
Page B.31 - 12
Containment List
B.32 Containment List B.32.1
Creation of Containment List
After having created groups in a drawing, you can make lists and insert them into the drawing. These lists can display the belonging of certain parts to component part groups. You can insert these drawing containment lists in the DetailCenter Express as well. First select the desired parts after having selected this command. Then, specify the desired insertion point of the list in the drawing by clicking a point. The following dialog appears displaying the basic settings.
Style
Here, you define how the list has to look like on the base of a style. The list templates are saved as template via the template management.
Insertion Point
Here, you specify the insertion point of the created list. You can choose between several insertion points.
Current Layer
The list is placed on the current layer of the drawing instead of on the configuration layer.
Page B.32 - 1
Containment List
Scale
Specifies the insertion scale of the list. The scale affects text heights and distances within the list. Click on this button to add further parts to the component parts list of the drawing containment list. You have to select the parts to be added. Click on this button to remove parts from the component parts list of the drawing containment list. You have to select the parts to be removed. Click on this button, to calculate anew an update the drawing containment list. You can force an update of the list if automatic update has not been activated.
Page B.32 - 2
Containment List
B.32.2
Processing of List Styles
Move to the second tab “Display” to edit a new created or existing list style. Select the style to be edited. EDIT Click on this button to edit the selected style.
Edit List Properties In the display list you can see any kind of information, such as which lines are output in which order, with which settings in the drawing containment list. In addition, you can make general settings concerning the list format.
Page B.32 - 3
Containment List
Style Name
The name of the current style; all modifications are related to this style.
Display List
Here, you see an overview of all displayed columns of the drawing containment list. They are displayed in this order from the left to the right in the drawing containment list. Click on this button to modify the line selected in the display list (column of drawing containment list). Then, another dialog opens. Click on this button to add a new line (column of drawing containment list) to the end of the list. Then, another dialog opens. Click on this button to add a new line (column of drawing containment list) in front of the checked line. Then, another dialog opens. Click on this button to delete the selected line (column of drawing containment list) from the list. Click on this button to save the style of the drawing containment list. Please remember to save the style after modifications; otherwise all modifications will be lost.
Text Size
Determines the text size in drawing units at a scale 1:1
Height Scaling
Increases the height of the lines in question by a factor. Depending on the text style, the readability of the drawing containment list is increased.
Left Margin
The distance of the signs to the left margin at left-justified insertion.
Right Margin
The distance of the signs to the right margin at right-justified insertion.
Offset
The distance of the group list entries of group parts to the main part.
Rotation
The rotation of the whole list by the indicated degrees
To the Top
If this field is checked, the list is running from the bottom to the top, i.e. the column headers are below.
Separating Lines The groups are divided by horizontal lines. Header
A column description is displayed for the columns of the list.
Text Style
Select the desired text style. Please refer to the AutoCAD manual for more detailed information about AutoCAD text styles.
Page B.32 - 4
Containment List
Invert
Causes a sorting in descending order from the column header onward.
Prefix
Separate prefixes can be predefined here for entries of groups, subgroups and assemblies.
The display colours can be globally selected for all elements of the drawing containment list. In addition, individual colours can be assigned to the different columns as well. Enter the colour directly by indicating the AutoCAD colour number or click on the desired input field and then on the SELECT button. Then, you can select the colour in the dialog as usual. Header
Colour of column headers
Label
Colour of column texts
Frame
Colour of list frame
Hor. Lines
Colour of the horizontal separation lines of the list
Ver. Lines
Colour of the vertical separation lines of the list
Page B.32 - 5
Containment List
Processing of Column Properties Each column of the list styles can be adapted and formatted in many different ways. After an entry to be modified or created has been selected in the display list of list format dialog, the following dialog opens:
Field Name
Select the desired field from the data fields.
Name1
The name of the column header resp. the first name if an entry has been indicated in input field „Name2‟ as well. Two rows are available altogether.
Name2
The second name of column header.
Length
Here, you enter the desired column width in text signs. The exact column width depends on the selected text style.
Decimal Pt.
The number of desired positions after the decimal point.
Text Size
Enter the text size of the column. If you have entered the value 0, the general text size of the list style is used. Enter the colour of the column text. If you have entered the value -1, the text colour of the list style is used.
Page B.32 - 6
Containment List
Position
Enter the alignment of the column: Left, Centre, Right or Automatic. If 'Automatic' has been selected, all texts are aligned to the left and all digits are aligned to the right.
Units
Enter the unit format Metric, Imperial or Automatic. If 'Automatic' has been selected, the default units of the drawing are used.
Page B.32 - 7
Containment List
Management of List Styles The management of the existing list styles is organized in the third tab “Order”.
Click on this button to load the selected style from the hard drive into the drawing. Click on this button to create a new list style. To do this you have to enter a style name (please pay attention that the name does not exist already). Then, this style is created with the settings of the style, which is current at the moment, and it will be used as new current style. The settings of the style can be individually modified afterwards. Click on this button to create a new folder for a clearer structure of your list styles.
Click on this button to delete the selected style.
Page B.32 - 8
Containment List
B.32.3 Processing the Content of Drawing Containment List Move to the fourth tab “Content” to look at the content of the drawing containment list and to modify it manually. To modify an entry, double-click the corresponding field and you can easily edit the entry.
Page B.32 - 9
Containment List
Page B.32 - 10
Detailing
C Detailing
Page C - 1
Detailing
Page C - 2
DetailCenter
C.1
DetailCenter
C.1.1 The 2D-Detailing Once you have created the model, finished editing of the model, have positioned all of the necessary components, and may have issued a (preliminary) parts list, the Finishing or Detailing of the 3D components can commence.
Detailing 3D Models The program generates the usual 2D views of the components for the workshop plans using the model, which means that the program will disassemble the model into its components, analyse the geometry of all the individual parts, and ascertains any existing but invisible edges. Then – depending on the requirements or your selections – the shape is displayed in several views and dimensioned and the position flag is attached. All of this takes place in a split second and in the background. Once the program has finished with one component, this component is deposited in a library in the form of a block – clearly organized according to the individual construction groups and design sections. After this procedure has concluded you can use the program to help you with the layout of the parts on your drawing sheets. From here on, you can treat the parts as if they were the usual drawings generated with a CAD program – but ProSteel offers you a few extra functions, which facilitate your work.
Intervention Options You do not have to worry that you are going to be at the mercy of the program and that from now on all your drawings will reflect the wishes of the software designers. A vast number of parameters help you to specify the appearance of your mapped design. These parameters can be saved as data records and reimported depending on the type of drawing (overview, life-size, 1: 10 workshop details, etc). This saves you time by being able to detail several parts at once applying one of these styles – that might already be enough to satisfy the requirements of your assignment. However, you can also detail small groups of components – one after the other – or even a single part in different styles. You always have access to the smallest detail.
Page C.1 - 1
DetailCenter
Basic Detailing Principle In general, the program distinguishes between two basic detailing methods: automatic and manual detailing. Automatic detailing takes place within the open model, and you tell the program to detail a certain part using a certain style. You have previously defined or selected this suitable style. The rest is out of your hands (for now). The result is a block with the views as interpreted by the program according to your specifications. Manual detailing requires that you determine the respective model section yourself. You are working within a work frame and may use the auxiliary functions of the program to attach and assign dimension chains, position flags, height indicators, etc. You can also use such standard AutoCAD elements as lines, texts, etc. The program only displays the invisible edges correctly and saves the details as a block – nothing more. This does indeed offer you the greatest level of influence on the appearance of the details but you have to carry out each step manually. The following chapters discuss the ProSteel DetailCenter and all of the tasks described shortly in the text.
Page C.1 - 2
DetailCenter
C.1.2 Detailing with the DetailCenter
What is the DetailCenter? Users control the complete 2D drawing and plan generation from within the DetailCenter – from a first overview of the components to the workshop drawing with multiple changes and manipulations. Think of the DetailCenter as a program within the program because it offers vastly more possibilities and options than one can see at first glance.
When you open the DetailCenter for the first time, a clear dialog box will be displayed with only a few settings. There is nothing more required after the adaptations to your personal requirements were made. As you know, you „only“ want to get your shop drawings from the model. However, if need be, you can at any time penetrate deeply inside the drawing derivation. You can make a great number of settings, ask for information, and check drawings. The philosophy behind this development is that you can get the same result in various ways, that you can make a lot of modifications – but you do not have to!
Page C.1 - 3
DetailCenter
General Dialog Info The DetailCenter is accessible via a dockable dialog which can be linked on the left or on the right of AutoCAD and which you can change in size. Doubleclicking on the header line toggles between the freely moveable and the docked status of the dialog. Most of the work within the DetailCenter is carried out using the context menus of the right mouse button or using drag & drop, where you drag an entry onto another entry. You will also work with tree lists that resemble Windows Explorer trees. Since these functions are similar to standard Windows functions, they will not be described here. Most of the dialogs that can be selected from within the DetailCenter are nonmodal dialogs. These dialogs are not always closed once a function has been selected but can remain open. This has the advantage of saving you a few mouse clicks and you can adapt these dialogs to the current situation, which means you are always informed about the status of the work. You can change settings and watch the changes immediately on the screen – just as you can do with many of the ProSteel commands. All dialogs of the DetailCenter are synchronized with one another as much as possible. Since this means that it does not take very long to accumulate a great many open dialogs on the screen, the DetailCenter will here support your work as well. Any non-required dialogs are hidden whenever necessary. They are exchanged with others if the command association changes. Dependent subordinate dialogs are closed automatically if you close a parent dialog.
Page C.1 - 4
DetailCenter
DetailCenter Surface The following page will give you an overview over the work area of the DetailCenter. This chapter includes an introduction and explains some of the basic detailing terms. The individual function areas are described later in special chapters.
Page C.1 - 5
DetailCenter
In general, the DetailCenter is divided into three main work levels. Usually, your building part or component will pass through all three levels until it is visible on the workshop plan in the form of a detail. However, your work in the different levels is limited to only a few mouse clicks, if all the basic settings of detailing are adapted to your requirements. Even if these works seem to be too awkward and involved for you, because you do not need the flexibility of the DetailCenter, you can use the DetailCenter Express. This part of the program once again combines the remaining steps until a workshop plan is created. Detailing is worked through according to a predetermined pattern. „Detailing by one single mouse click“ became a reality. Level 1: Component Overview (Prepare) Here you will obtain an overview of the parts of the model and their functional associations and relationships. You can view construction groups, single parts or whole areas of the model – all clearly structured in tree format. This is the place where you can manage and change detail styles and link your components with these styles as well as manage the modification mechanism. In addition, DetailCenter Express! Is started here. Level 2: Display Views Overview (Detailing) The second work level offers you an overview of the component or model views created by the program. You can add or remove views, display a preview and fine-tune the detail style. In this overview you decide what exactly is to be processed as a detail block and start the actual detailing process. Level 3: Detail Block Overview (Import) The third and last level features the detailed parts, which are located on your hard drive in the form of detail blocks. You receive an overview of the detail blocks of the current model (or other models) and decide which parts to import or integrate into which drawing. Placing the parts on a drawing sheet finishes the workshop plan, unless you would like to carry out a few adjustments manually. You can create automatic multiple sheets according to your own rules by means of InsertExpress! which can be started here.
Page C.1 - 6
DetailCenter
Construction Parts List Each of the three levels offers access to a window with the settings for the display of construction parts lists using the function button bar. Here you can specify which components are displayed in which logical sorting in the tree structure of the display. You can set any filter you like and store these settings in their own templates for each work level separately. In addition, a standard display is available for each level, which allows reasonable working already from the beginning.
Work Tools Each of the three levels offers access to a window with work tools using the function button bar. These tools are assigned to the corresponding area. In order to keep the display area of the construction parts lists as large as possible, many of the infrequently used functions and settings have been delegated to these subordinate dialogs.
Information Window In addition, the context menu offers access to another dockable information window. All three-work levels are subordinate to this information window, which shows the current status of the selected entry. Depending on the list, this window displays the name and type of the part, data of detailing, insertion location, current status, and much more.
Context Menu A supplement to every level is a level-specific context menu accessible through the right mouse button, which lists only those functions that are significant to the respective list. You will probably use the context menus quite often because they represent the fastest way to access a command.
Templates As you already know from the other ProSteel functions, the basic settings of the DetailCenter can be saved as template for each level. The settings of work tools and of construction parts list are stored. These templates (as reference) may again be stored in a parent template together with the global settings for the DetailCenter. This allows individual configuration of the complete DetailCenter. Later, you only have to load the suitable configuration for the current working process.
Page C.1 - 7
DetailCenter
Favourites After defining some of the templates as favourites for the complete DetailCenter, this allows fast selection from the favourite list. This is the most comfortable way if you have to change the setting frequently during one session.
Detail Styles The detail styles are the cornerstone of the entire detailing process. They describe how a part is to look as a workshop detail or how the model is to appear as an overview. The content of the styles is described in detail in the chapter 'Detailing Styles'. The management and modification of a style is described in detail in the chapter 'Component Overview'. Just a preliminary note: A component without detail style cannot be processed and is ignored by the program when it comes to detailing!
Preview The detailing of a selected part can be previewed from within the views overview or directly from within the model. This will create a small AutoCAD drawing displaying the exact result of the detail style settings applied to this part. The small drawing shows how the part will be detailed. This window and its drawing can be zoomed or queried for information because it is an independent AutoCAD drawing. Since you can now open this part's detail style, you can track the effects of different style settings in „real time“. We call this fine-tuning of the detail style. If you open the preview for another part, you do not have to close this window first. The content is updated automatically. After viewing the detail, the window must be closed manually. While the preview is open, most of the functions of the DetailCenter are inaccessible. Please remember: The preview might be hidden behind some other drawing because so many windows can be open simultaneously. Also consider the speed of your computer when viewing a great many details such as construction groups or entire overviews. Do not become impatient if your computer seems to be busy calculating for what seems like a long time. Even fast computers need a little computation time, but some of the latest computers will surprise you with the speed of the update.
Page C.1 - 8
DetailCenter
C.1.3 General Information – Scale and Dimension Styles There are two options for detailing a part when working with the DetailCenter: Either the part keeps its original size and the surrounding text (e.g. dimensions, labels, etc.) is scaled to fit the part or the part is scaled and the text keeps its original size. This is to support both of the methods typical for AutoCAD.
Scales The first method allows for a simple – and unscaled – processing of the drawing and does not generate the scale until the time of plotting. Components can also be inserted (unlabeled!) into other plans easily and comfortably. The disadvantage of this method is that this involves some thinking, to keep different scales and the same text sizes within one drawing and still have to copy parts from other drawings. This is where the second method is more practical: You always plot using the scale 1:1, always use the same text size, and scale the parts to fit the plotting scales – just as you would do when drawing by hand. This allows you easy management of different scales within one drawing. ProSteel permits both methods when detailing, but you have to stick to one or the other method within one drawing. This is because the dimensioning styles are the problem.
Dimensioning Styles You define certain AutoCAD dimensioning styles in your model, which you can use within the detail styles for dimensioning. When detailing, the program creates a copy of the style, and from your settings determines the required text and length scaling. This style is assigned a new name indicating the length scaling and is used in the detail block. Although the program does set the dimension text into the dimension permanently, e.g. to evaluate contractions, you do want to receive an AutoCAD associate dimensioning after the detailing has been concluded; thus the copy. This also keeps your original style intact and you do not need to create separate styles for each individual scale.
Page C.1 - 9
DetailCenter If you want to work with the first method using a scale of 1:10, you will obtain a style with a text scaling=10 and with a length scaling=1. The name could be, e.g., PS_STD_1_10. Process another detail with different settings of the AutoCAD dimensioning style and you will obtain the same name for the style. No problems occurred up to now. Now insert both details into a drawing and the first one will „win out“ because the name is identical. However, this is typical for AutoCAD and ProSteel has no intention of changing that. If you have problems with the dimensioning styles, you can be assured that this is due to not being consequent in this case. This is the reason you should make sure that your prototype file, into which you want to import the details, does not contain any dimensioning styles (if possible), and that the basic styles with the same name are also identical in different models if you want to mix together the details of different models. Do not change the size by only changing the scale (e.g., when manually dimensioning), but rather define a new style with a new name. This is the way it should be when using AutoCAD „pure“ because there is a good reason for it: If you rescale the parts manually, you are simply exchanging the dimensioning style and all is well again.
Page C.1 - 10
DetailCenter
C.1.4 General Information - Detail Types At detailing, the DetailCenter differentiates between different detail types, such as single parts or component part groups. In most cases, these definitions come from 3D-modelling so that you don‟t have to take into account anything else.
Single Parts These are all parts that correspond to a real 3D-component part in the model and normally are the smallest unit of detailing. The DetailCenter itself, however, cannot differentiate between production parts and parts of additional purchase or on stock. A single part drawing can be generated of every ProSteel volume solid. In this drawing, the part edges, angles of intersection and drill holes are dimensioned. Normally the coordinate system of the component part defines the alignment of standard views, such as front view, plan view, etc. Weld shapes are an exception. They consist of several single components, but in most cases they are considered and treated as one component part.
Component Part Groups This is a logical arrangement of single parts that you have already created in the 3D-model by using the command „Groups‟ (PS_GROUP). A drawing of the component part group is created so that the add-on dimensions of the single parts and/or groups to each other are dimensioned. It is also possible to insert subordinate structures and single part dimensions of component parts. As the structure of component part groups has been considerably extended since version 18.0, it will be described in detail in a separate chapter.
Views This is a three-dimensional arrangement of component parts in the model as they can be seen from a defined view direction and with a previously defined view depth, which is not to be confused with the component part views. An overview drawing is created in which the position of the component parts to each other and to existing reference axes (constructional axes) is dimensioned. Views are derived from the existing model views which were either created automatically by the workframe (PS_WORKFRAME), or which were added by you later.
Page C.1 - 11
DetailCenter
Isometric Views These views show the model in a three-dimensional depiction and are often desired without the hidden edges. View direction is determined by the five global 3D-model views of the configuration. It is possible as well to add isometric views to individual details (e.g. groups). In this case, these are depicted as component part view together with the other partial views.
Anchorage Plan This view refers to the plan view plane and shows the plan view including dimensions together with the depiction of the base plates and supports. As special feature, it is possible to use different scales for plan view and base plate details. The dimensioning of the holes can be referred to the plan view grid.
Page C.1 - 12
DetailCenter
Manual Details In principle, these are also views of the model, but you can freely determine the involved component parts and the view direction during detailing. Manual details allow you to generate unusual views or special detail sections. As the name implies, you have to attach the dimensioning yourself and you don‟t have any possibility to have the view automatically checked with regard to modifications. Manual details don’t appear in the component part list nor do they have their own detailing style. Scale and display of the component parts are, however controlled by a temporarily assigned detailing style during generation. It is true that after generation manual details can be inserted into the drawing in the same way like standard views.
Multi-Shapes These are single parts consisting of several components that are normally treated and dimensioned like a single coherent component part (e.g. weld shapes). Depending on the situation it may be that these component parts are not ordered but individually produced. Therefore, in the DetailCenter you can consider a multi-shape as components. That means that it appears as an individual subpart in a component part group, but on the other hand you can still create single part drawings of the components. Therefore, it is necessary to activate the option „Treat Parts as Single Parts‟ in the 3D-component parts properties for the parts in question.
Page C.1 - 13
DetailCenter
Gusset Details These are views on the model showing the involved component parts of a connection (2) or of a group of connections (1) as detailed section.
In most cases, the connecting elements such as plates, bolts, etc. can be completely seen whereas the connected shapes are only partially displayed. The connections are recognized via the existing logical links if at least one of these links is named with an identification code. A gusset detail appears as separate „component part‟ in the component part list of the DetailCenter and a detailing style can be assigned to it. Afterwards, you treat it in a similar way like a component part group.
Create Named Connections For this purpose, activate the „Extended Inputs‟ for logical links in the global settings of ProSteel, if not yet effected. In the property dialog of the connection, you can now enter a clear identification code and optionally a designation.
Page C.1 - 14
DetailCenter
Assignment to Common Gussets If there are several connections in one three-dimensionally coherent area, a common gusset detail can be created out of these connections. Only one of the involved connections has to (and should) have an identification code. The main shape of this connection now defines the alignment of the gusset detail. Within a search area (defined by you in the global settings of the DetailCenter) all other connections are now assigned to this gusset. Then, they won‟t create an own main entry any more – even if they themselves have a code. Here, you see a section of the connection data of an endplate. If you don‟t have any explicit links, perhaps because you modelled everything manually, the necessary relations can be generated via manual links (PS_MANUAL_LINK).
Page C.1 - 15
DetailCenter
C.1.5 General Information – Group Structure ProSteel manages a 4-level group structure which clearly extends the possibilities of logical or constructive structuring. This structure is completely depicted in the DetailCenter and can be detailed with its own detail styles to workshop plans on each level separately. Traditional steel construction mainly uses single parts and standard component part groups. This is the reason why you often only talk about this in the chapters about detailing. However, what is valid for standard component part groups, is mostly also valid for the extended group structures. A – Single Parts These are the real component parts from which the next higher levels can be built. Depending on the selected grouping, these individual single parts then turn into main parts or add on parts or assembling parts. B – Subordinate Groups (Subgroups) Subgroups functionally correspond to the standard component part groups described below. However, they can be applied logically as independent subordinate structures in the higher structures. You can e.g. declare assemblies on stock as subgroups from which a separate workshop drawing won‟t be required any more. C – Groups Each standard component part group, sometimes called main group, too, consists of a so-called main part and several subparts (add-on parts) – the main part defines the alignment of the different views on this component part group. In addition, each group can have subgroups. Conventionally, the component part group is a group of component parts which are inseparably connected to each other, e.g. by welding. D – Assemblies This is the highest structure because it can be built from any single parts, subgroups and component part groups (which can contain subgroups themselves). An individual object determines the alignment of the different views on the assembly so that they can be independent of any component parts involved. Assemblies often are any already mounted part constructions.
Page C.1 - 16
DetailCenter Use of Group Structure In principle, there are nearly no limits for you how to group the component parts because the examples for application only represent few of the great number of possibilities. It is up to you whether you want to apply grouping according to construction for the order and the parts list or whether you only carry out a logical grouping for later 2D-drawings. Within the DetailCenter, you find a hierarchic tree structure of grouping and you can filter and sort the display according to the different planes. Each structure and subordinate structure can be detailed as separate detail and inserted in the 2D-drawing. The following example shows the practical use of group structure at detailing: A column of a storage rack builds an assembly (1) of two component part groups (1a) which are bolted with each other. The lower of the two groups contains two welded base points which here however are assigned to the group as subgroups (1b).
The detail drawing of the assembly (2) is showing the column of the storage rack standing and only with the main dimensions as a kind of total overview of the construction.
Page C.1 - 17
DetailCenter The detaill of the component part group (3) now displays the position of the addon parts in the component part group. The two base points are not dimensioned in a more detailed way, but they appear only as complete part.
The base points can be inserted into the drawing as separate detail of the subgroup (4) with detailed mounting dimensions. In case of stock items this could of course be omitted.
When the base point is manufactured together with the remaining group, you require perhaps single parts details (5) of the base plates which again can have a completely different detailing style.
Page C.1 - 18
DetailCenter Advantages of Assemblies The use of assemblies may also be useful in situations where normally you would use only groups. As groups always determine the alignment of the views as well as the direction of dimensioning according to their main part, you often get a very unfavourable combination for certain oblique constructions.
In contrast, a superior assembly permits free selection of alignment and thus also of dimensioning. In addition, you can of course also dimension the group in main part direction in this drawing.
For more detailed information on dimensioning of complex group structures, please refer to the chapter “Detailing Style” of this manual.
Page C.1 - 19
DetailCenter
C.1.6 Intelligent 2D-Details If you have inserted the results of the detailing into a drawing and want to further process this drawing manually, you have to observe a few things described in the following section.
Intelligent Details The result of the detailing process is a detail, as you would draw it with standard AutoCAD. You can see centrelines, visible and hidden edges, holes, etc. and the part is still not a true „flat line graphic“. Intelligent details are still displayed as three-dimensional details when viewing the page containing individual parts or construction groups at a slant. However, when you print the part it appears completely two-dimensional The advantage is that you can subsequently add cuts or dimensions while taking any possible shape shortening into account. If you want to change the geometry subsequently, that is in the detailed part, you have to import the changes with the ProSteel functions if you still require the intelligent features. However, if you want to dissolve the detail in its entirety, you have to „explode“ the component like a block. This gives you a group, which can be ungrouped to reach the lines. Of course, the consequence is that all of the intelligence is lost. Thus, omit this if at all possible. Overviews and manual details are an exception – those are already non-intelligent line depictions.
Shape Shortening During the detailing you can select whether you want to shorten any parts that are especially long. Contracted sections are then attached to those sections of a component that do not show any manipulations in a longer stretch and are actually of no interest. This gives you the opportunity to display the sections that are important for the detailing in an optimal size (because you can select larger scales) or show more components on a given page. The picture below clearly illustrates the difference. Both shapes are detailed with the same scale and scaled to the same length.
Page C.1 - 20
DetailCenter
The problem of shortening is the subsequent dimensioning with AutoCAD. However, if you work with the ProSteel dimensioning, you can consider any shortening at a later time because your work is object-related. This requires that the components are not dissolved down to the lines after detailing because then this property is lost!
Pick Helpers The intelligent components of groups have the disadvantage that the individual parts of a detailed construction group are inaccessible if e.g. you want to move them subsequently. It would also not help to activate or deactivate the group using the AutoCAD-groups. This is why ProSteel features the "Pick Helpers”, which you might view as a grip variation. If you do not have any part selected in the drawing and you access the context menu using the right mouse button, you will see the option ProSteel SETTINGS and the entry Pick Helpers. Use this entry to toggle the pick helpers on and off. Small little triangles now appear on the components, which you can now use to select and e.g. move the parts of a group. When working with the pick helpers, don't forget the following special feature: If a building component of a construction group is moved, a new drawing of the group is only created when you keep the ALT-key pressed during the movement. Otherwise, the drawing has to be regenerated to obtain the modified display.
Page C.1 - 21
DetailCenter
C.1.7 Display of Construction Component Lists Construction component lists are most substantial within the three work levels. In these lists, the construction components or detail blocks are displayed in a tree structure that can be used for working in the selected work level. The user can freely configure Sorting and filters of the parts. Thus there can be different displays for different tasks.
Display Sorting (Structure) Select the dialog for the display structure via the STRUCTURE button to modify the display sorting. After modification of preset values and closing of the dialog box, the display will be restructured. However, it is also possible to select your individually created template for the different work levels in the global settings of DetailCenter.
Page C.1 - 22
DetailCenter
Group Display Type Display Type
Here you select the fundamental type of display. ProSteel Standard – the component parts are displayed in the usual group/single part structure. In addition, loose single parts and model views will be displayed as well. User defined – you determine the hierarchy of the display individually, i.e. you specify in which order the parts have to be sorted according to which properties.
Available Display Fields Select the desired property field of a part, which has to be added to the tree structure.
Page C.1 - 23
DetailCenter
Selected Data Fields The currently selected property fields of the structure. The order corresponds to the hierarchy level in the tree display (sorting order). The property field corresponds to the type of this property. It depends on the data of the parts to be represented which entries will actually be displayed. If you have e.g. selected the length as property, an entry will be created on this hierarchy level for each existing shape length and all components having the same length will be subordinate to this property.
Group Display Filter Standard Filter
Only those parts will be displayed that meet the specified filter condition. In the selection list, some pre-defined filter conditions are offered for selection, which however cannot be modified by you.
User-defined Filter
Only those parts will be displayed that meet the specified filter condition. The filter condition here is completely user-defined. The selected properties for the structure and those for the filter don‟t have to be identical. It is for example possible to display a sorting only according to the length but filter out the component type rib completely with it.
User-defined Additional Filter An additional second filter; this filter is logically linked with the user-defined filter by AND, thus, a component part has to meet both conditions (and if need be the conditions of the standard filter).
Selection List
Select one of the filter templates that you specified in the corresponding list. Select Current Settings when you haven‟t created any template and you want to use the current settings of the filter dialog instead.
EDIT
By clicking on this button you can edit the display filter or store/select a filter template.
Page C.1 - 24
DetailCenter
Group Options Sort Order
Here, you select the order of the entries. Ascending – The entries are displayed in an ascending numerical or alphabetical order (1,2,3,4...). Descending – The entries are displayed in a descending numerical or alphabetical order (...4,3,2,1). No Sorting – The entries are not sorted.
Show Entries 1x
Each component part is displayed only once in the whole tree structure. The position numbers serve as criterion of comparison, separated in groups and single parts. If a part having the same position (e.g. a rib) is situated in two different group positions, this is only displayed in the first group.
> New Per Group
Each component part is displayed only once in the whole tree structure, but each single part of a group will be registered anew per group. If a part having the same position (e.g. a rib) is situated in two different group positions, this is displayed exactly once in each group.
Group Display
Here, you select the way group parts will be displayed. As Group Structure – The building components, substructures and bolts of a group are subordinate to the group entry. This allows an easy selection of any part of a group. Only Single Parts – Only the actual parts of a group are displayed, but not the group entries themselves. Group and Single Parts – The groups (as an entry without subordinate parts) and the actual parts of this group are displayed of equal value side by side. The advantage of this separation is that in case of a userdefined sorting you can arrange the group and the component parts separately. Otherwise, it wouldn‟t be possible to register the single parts in the case the group has not been registered. Nor would it be possible to separate e.g. in groups, substructures and building components of equal value side by side.
Page C.1 - 25
DetailCenter
With Pre-sort
The entries are preliminarily sorted according to views, groups, if need be, main parts /building components, substructures and loose single parts (depending on the selected group display), if you have selected ProSteel standard sorting.
No empty Folder
The entry of preliminary sorting is not displayed if it doesn‟t contain any further entry.
Display Filter The display filter allows a very detailed filtering of component parts according to their properties. You can describe any logically nested filter condition on the basis of the existing properties (there are no limits with regard to the complexity of the query). A standard filter and two filters of equal value (user-defined filter and additional filter) are available which are linked with each other by the logical AND. You may store these filter conditions as templates which can be easily selected. This allows you to prepare frequent filter conditions that are perfectly adapted to your application. Although each filter is logically nested by any condition such as 'All shapes longer than 5000, but no IPE270 or IPE240', it sometimes is easier to work with the additional filter, too. If e.g. no sheet metal plates are required for a task, you can exclude them permanently already via the additional filter. The user-defined filter then serves for your daily work and you can modify this filter without having to add the condition 'No sheet metal plates' each time.
Page C.1 - 26
DetailCenter
Group Comparative Term List
Here, you see all property fields of the parts that may be used for the filter criteria. Each field can be used as often as you like. Select the desired field by clicking on it in the list. Then, the field name will appear in the display on the right.
Display Fields
Here, you specify a single comparative condition consisting of field name, comparative operator and parts‟ data. Several comparative conditions may be combined with logical operators to build the complete filter condition.
> Left Side
The current property field that can be modified by clicking on it in the list.
> Center
Here, you select the comparative operator that links the property field and the parts‟ data (content of the field) to build a comparative condition.
Page C.1 - 27
DetailCenter
> Right Side
Possible parts‟ data (contents of the field) of the selected property field in a dropdown-list. Thus, impossible comparative conditions are avoided. It is possible as well to use the standard wildcards * and ? for variable signs in text fields.
When all of the three components of a comparative condition have been preset, you can add them to the complete filter condition by clicking on the INSERT button. Depending on the existing conditions and on the selected logical link, the appropriate brackets will be set.
Group Filter Condition Display Field
The complete filter condition as logical link consisting of several comparative conditions. When you have already inserted a comparative condition, the active logical operator of the next comparative condition will be displayed, too.
Dialog Commands OPERATOR AND By clicking on this button, you select the logical operator AND as logical link for the next comparative condition.
OPERATOR OR By clicking on this button, you select the logical operator OR as logical link for the next comparative condition.
BRACKETS Clicking on this button forces the program to manually add brackets to the filter conditions existing up to that moment. Brackets are always necessary if you want to link the complete result of a (partial) condition with another one, because the combination of (A AND B) OR C is different to A AND (B OR C).
Page C.1 - 28
DetailCenter
INSERT By clicking on this button you add the current comparative condition to the complete filter condition.
DELETE By clicking on this button you delete the comparative condition that was added last.
DELETE ALL By clicking on this button you delete the complete filter condition.
Use Filter Templates As you already know from nearly all ProSteel functions, you can store the filter conditions as templates, too. This filter can be applied in the settings of the display via the name of this template. Don‟t forget that this is only a hint. If you should modify the template of the filter, the template of the display, where this filter was used will produce another result as well.
Page C.1 - 29
DetailCenter
C.1.8 Component Overview Since the component overview constitutes the starting page of the DetailCenter, the functions described here also apply to the other work levels. These are especially the individual sorting of list display and the use of filters. When selecting the DetailCenter command, this tab will always be active first, and the current drawing is „scanned“ by the DetailCenter. All model parts are searched according to predefined criteria and then displayed. This might take some time when large models are involved. All detail styles are also searched and displayed. A great number of the described functions may be selected via the context menu of the right mouse button. Look there whether the corresponding entry is available if there should be no hint in this documentation. If you need only a section of a model, use the visibility classes to hide the unneeded parts. Any parts hidden with the visibility class command are not recognized by the DetailCenter. Please note however that these parts are then no longer recognized by any of the details.
This is the function bar of the component overview. Buttons no. 1-3 are available in each work level with the same function.
Page C.1 - 30
DetailCenter
Dialog Commands RECURSION (1) By clicking on this button, recursive processing is alternatively switched on or off. If it is switched on, any processing applied to a parent entry in the component parts list (e.g. assign style) is also applied to all subordinate entries. Otherwise, only the selected entry is processed or all entries on the same level, if this option is activated in the “model“. STRUCTURE (2) Click on this button to open the dialog for display sorting of component parts list. Here, you can select the standard display or an individual structure and set user-defined filters. SETTINGS (3) Click on this button to open the dialog for the work tools where you can specify additional settings only for this work level. Depending on the work level, the global settings are valid, too, which can be defined separately. UPDATE (4) Click on this button to search the selected drawing once more. This is required if you activated a different drawing in the MDI environment or if changes were made to the current drawing (e.g. new position). EXPRESS (5) Click on this button to start the DetailCenter Express, to carry out a complete detailing according to a specified pattern.
Page C.1 - 31
DetailCenter
PREPARE (6) Click on this special action button to import all parts selected in the parts list into the view list and determine the views pre-selected in the detail style. Component views can be generated only for parts linked with a detail style. WORK LEVELS (7) Switch on a different work level by clicking on the corresponding tab. Any open dialog is updated accordingly. Here, you can switch over to the page for the global settings of the DetailCenter where you can specify the settings, which are valid for the whole DetailCenter or for several work levels. TITLE BAR (8) If you double-click on this area, the dialog switches from docked to free moving. Alternatively, you can also grab the dialog and “pull it out” while keeping the left mouse button depressed. SEPARATOR (9) Use this separator to enlarge the docked dialog. The drawing next to it will decrease in size accordingly. In addition, there is a scrolling bar between the two display lists (if two lists are available), which you can use for modifying the scale of the two lists. CLOSE (10) Click on this button to close the DetailCenter.
Page C.1 - 32
DetailCenter
Detail Style List This list displays all available detail styles. The selection consists of the styles saved in the drawing as well as the style files saved on the hard drive. View and Modify Detail Styles Double-click on the desired list entry to open the dialog for the detail styles where you can modify the entries. Alternatively, you can also use the context menu option Edit Detail Style. Modifications apply only to the current session. If you want to save your changes permanently, you have to save the model or export the detail style as an independent file to the hard drive. Clicking on another list entry while the detail style dialog is open updates the display of the detail style dialog. Save and Copy Detail Styles Select the detail style you want to save from the list. Then select the context menu option Save Detail Style. Now, the style is exported as a file with its name to the hard disk. If you want to save all styles of the drawing, you select the entry Save All Detail Styles instead. Now, each style is saved in its own file. If you want to copy a detail style, select the entry Copy Detail Style. Then, a dialog appears where you can indicate the new name of the style. The new detail style is now displayed in the list and can be processed further. Kindly also take care of the hints concerning the modified file format at the end of this chapter.
Delete Detail Styles Select the detail style you want to delete from the list. Then use the context menu option Remove Detail Style. The detail style is now deleted from the list and the drawing. The styles exported to the hard drive are not affected. Please note that this deleted detail style is then no longer available for later sessions unless you have exported it to the hard drive before.
Page C.1 - 33
DetailCenter
Set and Remove Default Detail Styles Some detailing functions such as manual detailing require a default detail style. Just select the desired style, followed by the entry Set as Default Detail Style in the context menu. The current default detail style is identified in bold type. To modify the default detail style, just select another style and set this one as default detail style. To completely remove it, select the current default detail style, followed by the entry Remove Default Detail Style.
Load Detail Styles At first loading of the DetailCenter, only those detail styles are displayed in the list, which were saved in the drawing. You can, however, load additional style files (e.g. the defaults of certain customers), when you start detailing. If you then save the drawing, these additional styles will be permanently available in the drawing and will be displayed at the next loading. To load an additional style select the context menu option Load Detail Style. Now, you can select a style file by the file selection dialog. If you directly want to load all existing style files from the standard folder, then you select the entry Load all Detail Styles instead. This additional loading of styles is reasonable if you require a great number of different styles in your company all in all, but only a part of them has to be used per order. If you load a detail style existing in the model, the existing style will be overwritten. Kindly also take care of the hints concerning the modified file format at the end of this chapter.
File Format of Style File As the volume of a detail style considerably increased compared with earlier versions, from version 17.2 on the file will only be saved as binary file with the file ending *.stx. All commands for loading a detail style wait for the style files in this format. Hint: The former text files (*.sty) will not be supported any more from version 18.0 on and, if need be, have to be converted together with the previous version..
Page C.1 - 34
DetailCenter
Component Parts List This list is the primary working list of the DetailCenter because it displays all parts of a model for current status verification. Display and sorting of the list depends on the display settings. Status Indicator Depending on the component status, the entries feature small pictures. Only entries with such pictures consist of parts that can be detailed. All other entries are only parent sorting entries. Symbol Colours Gray
Parts without any special status. Probably, these parts have not yet been processed with the help of the DetailCenter.
Blue
A detail block of this part has already been created. However, it has not yet been inserted into a 2D drawing. The original part in the model has not been modified compared with the detail block so that this block can be inserted.
Yellow
A detail block of this part has already been created. However, it has not yet been inserted into a 2D drawing. The original part in the model has however been modified compared with the detail block so that this block has to be detailed anew before it can be inserted.
Green
A detail block of this part has already been created and inserted into a 2D drawing. The original part in the model has not been modified compared with the inserted detail block so that this detail is currently valid in the 2D drawing.
Red
A detail block of this part has already been created and inserted into a 2D drawing. The original part in the model has however been modified compared with the inserted detail block so that this detail has to be updated in the 2D drawing.
Page C.1 - 35
DetailCenter
Additional Checkmarks Checkmark
A detail style has been assigned to the component part.
Asterisk (*)
the part in question is the main part of the associated group.
Information about the Component Parts The meaning of the different entries can be easily differentiated by means of the symbols, because single parts, sheet metal plates, groups, views, etc. have their own typical symbol. In addition to this, you can open a dockable information window via the entry Display Information in the context menu. This window informs you in detail about all properties of the part selected at that moment. This call can be found in the other work levels too. The content of this window is always automatically adapted to your current selection. Multiple Selection and Drag&Drop Use the SHIFT and CTRL keys to select multiple entries. This is a Windowsspecific function, which will not be explained here. Many operations can also be carried out using drag&drop. For example, by dragging a component list entry on a detail style, you can link the two. Selection of ProSteel Properties Via the DetailCenter, the properties of component parts can be directly modified in the model. Select the entry PS3D Properties in the context menu after having selected the desired list entries. For more detailed information about parts properties, please refer to the corresponding chapters of this manual. In principle, selection is as if you select the part(s) in the model and then load the properties. In combination with the sorting possibilities of the component parts list, however, it is possible here to modify e.g. only the material of head plates. If you are working with a big model, using the traditional way would be much more complicated. Don‟t forget to update the DetailCenter after a modification was made because the program doesn‟t carry out an automatic update deliberately.
Page C.1 - 36
DetailCenter
Reference to the Model (Search) The component parts list has a direct reference to the model drawing in both directions, which allows an easy and fast orientation. On one hand, the components of the entries selected in the list can be displayed in the model. This allows you to see directly which parts belong to a group, to a view, etc. To do this, select the option Display Parts Selection in the Model in the work tools. Now, select an entry in the component parts list and the assigned parts are colourfully checked in the model. Choose the entry 'Model‟ to remove the marking. On the other hand, a part selected in the model can be checked in the component parts list (and selected). To do this, pick the part in the model and select the menu point Search/Selection Single Part via the context menu of the right mouse button. Now, the list scrolls to the position with the assigned entry, the entry is checked and selected. The parent entries such as group list nodes etc. are "opened“. Sorting Sorting of the component parts list always depends on the work tools settings. The numerical sorting of position within the sorting according to groups, part types, etc. is always carried out in three steps: At first, sorting is effected according to the main position number. This number again is sorted according to an existing position index. If additional prefixes are available, theses are sorted in the last step. Position numbers, which only consist of letters, are displayed at the beginning in an alphabetical order. If the filter 'Display Each Part only 1x‟ is checked, only those positions are assumed to be identical which only differ in their part prefix unless the button 'Don‟t Use Position Number Prefix' has been activated. Standard Sorting:
Pos AA Pos BC Pos 1-1 Pos 1-2 Pos TR 1-2 Pos 2-2 Pos ST2-3 Pos TR2-3 Pos 2-4
with Filter:
Pos AA Pos BC Pos 1-1 Pos 1-2 (lapses) Pos 2-2 Pos ST2-3 (lapses) Pos 2-4
Page C.1 - 37
DetailCenter
Assigning Detail Styles Partial views and thus details can be created from every component part with a style. These different sortings help you to link the correct parts with the necessary style in a rapid way. You can only detail parts having a detail style. Which details you get can already be determined here. Associate a Style In the list, select the parts and then use drag&drop to pull them onto the detail style – and you are finished! You can also select the parts and use the context menu to select the option Link with Detail Style. If you want to pick the parts directly from the model, you have to select a detail style first. Then, you call the entry Pick Parts to be Linked in the Model in the context menu, followed by picking the parts in the model (or you select them by a window). However, you can assign only single parts with this method. Recursive Association If a single part has a detail style, this part is detailed with this style in the form of a single part detail. If, however, a construction group has a detail style, this style becomes the detail style for the entire construction group detailing. If you want to generate only group details, the associated single parts do not really require their own detail style because the group style also applies to the parts within that group. Use the recursive or non-recursive association to assign styles to the parts you want to detail. If you selected the recursive association (the 'Recursive Processing‟ button is pressed) and you assign a style to a group, this style also applies to the single parts of that group. If in this case you pull the entire model onto the detail style via drag&drop, all groups and all single parts are assigned the same style.
Page C.1 - 38
DetailCenter
If you assign style "A" to the model and 'Recursive' is activated, every entry is linked with this style. If 'Recursive' is deactivated, only the entries Outline, Complete Plan View, BG 100 and BG 101 are linked with this style, because they are located hierarchically immediately underneath the model. Since the model itself is only a sorting entry, it passes the association along to its subordinate entries. If you assign style "B" to the BG 101 and 'Recursive' is activated, every single part of this group is linked with this style as well. If 'Recursive' is deactivated, only this construction group is assigned style "B". Separate Detail Styles Select the parts in the list and then use drag&drop to pull them towards the top and away from the DetailCenter – and you are finished! You can also select the parts and use the context menu to select the option Separate from Detail Style. Remember that parts without a detail style cannot be processed unless the parts belong to a group and you want to detail only the group views. Write-Protection Use the Set Write-Protection command in the context menu to write-protect certain entries. The entries are highlighted and cannot be overwritten with a new style or separated from a style. You have to remove the write-protection before change or delete the style of such an entry. The combination of recursive processing and write-protection facilitates assigning different styles to groups and single parts: Deactivate recursive and active write-protection and drag the "model“ entry on the group style. Only the groups are assigned a style (due to the recursive setting) and are then saved. Activate recursive and drag the "model“ entry on the single part style. The style association is passed on to all parts but the groups themselves are writeprotected. Hide Parts You can temporarily remove undesired parts from the component parts list to get a better survey. To do this, select the corresponding parts and then activate the menu point Hide Entry in the context menu.
Page C.1 - 39
DetailCenter
Visibility only refers to the component parts list. Don‟t mix up this function with the visibility classes in the 3D-model, which really hide the parts visually and thus switch to permanently invisible parts. When the DetailCenter is started anew or when you use the command UPDATE, all hidden entries will be visible again.
Import for Detailing All parts with a detail style can be imported for detailing, which means that the corresponding views are created. The import for detailing concludes your work in this work level and you can switch to the next level. Create Partial Views To import parts into the view list just drag the desired parts on the action button PREPARE using drag&drop. The button will then temporarily turn red so that you know it is active. Let go off the mouse button and the parts are transferred. You can also highlight the parts and click on the action button with the mouse. If you have checked the ‚Import Directly to Views‟ option in the settings, you do not need to do anything else because the style association also transfers the parts. If you separate parts from their style, they are also removed from the view list. When the part already exists in the view list, the entries will be corrected correspondingly. When the corresponding group already exists in the view list, the single part will be assigned to this group. Process and Delete Partial Views It is always possible to add or remove partial views by modifying the detail style correspondingly and importing the part anew. However, if you want to add a partial view only for a certain component part and the detail style has to remain unchanged, you can add or remove partial views in the second work level 'Views‟ independent of the style settings. The manual details where the 2D-details are generated largely independent of the part hierarchies and detailing automatisms are also created in this work level.
Page C.1 - 40
DetailCenter
Special Settings You have access to the hereafter described settings via the button SETTINGS.
Group Behaviour during Style Association Protect
The entry is protected at once after association of a detail style and is shown in bold. It cannot be modified unless the protection is removed.
Hide
The entry is hidden from the list after association of a detail style. Only the parts without association of a detail style are shown. The DetailCenter has to be started anew or updated to make the entry visible again. Remember that in case of hiding a group its single parts will be hidden too – even if they do not have any style yet.
Take over
The entry is immediately imported to the next work level (views) after association of a detail style. It is available for detailing.
Page C.1 - 41
DetailCenter
Group Behaviour during Update Restore Manual Changes During automatic update of 2D-drawings, the program tries to restore modifications which were made later in the details. Otherwise, the detail is displayed as completely new detailed according to the detail style. > Deleted Dimensions Dimensions or position flags deleted by the user are deleted again. You will find a more detailed description of automatic 2D-Update in a separate chapter of this documentation.
Page C.1 - 42
DetailCenter
C.1.9 Views Overview If you have imported all of the parts for detailing, the generated views are displayed in this work level, the views list. Since most of the important points have already been discussed under Component Overview, here are just a few special commands of this work level.
Dialog-Commands ADDITIONAL VIEW Click on this button to add further views to the selected component part or to create manual details. Then, another dialog opens (see also: Additional Views). After an entry has been checked in the views list, the corresponding parts for the manual detail are automatically selected. On the other hand, when you select the first entry of the list, you can select any part by clicking on it in the model. DETAILING Click on this special action button to detail all of the parts selected in the views list, including the mentioned partial views, and to store them on the hard drive as detail blocks. The created detail blocks then can be inserted in your 2D-drawings.
Page C.1 - 43
DetailCenter
Views List Here, you will see all views of the imported parts in the form of entries, which can be checked for their current status. The display and sorting of the list depends on the settings of the display templates. Status Display The significance of these pictures matches the component part overview; please refer to that section for further details. If the view has already been detailed it is marked with a checkmark. Preview Before detailing you can display a preview of the detail or of a single view. Detailing will take place as it is displayed there. If you choose only one view you will see exactly that view in the preview. However, if you select the entire component or group, you will see all existing views of the part in an order determined by the program. To activate the preview, just select the corresponding entry and then select Preview via the context menu. After some computing time displayed by the status indicator, a drawing window opens containing the possible detailing as a preview. If the detail style dialog and the preview are open, you can now change the different detail style settings and check the effects of the modifications. If the detail style is not yet open, you can open the dialog via the context menu Edit with Detail Style. The correct detail style belonging to this view is then already selected. Add and Remove New Views Should you notice that the views displayed are too few or show an unfavourable line of vision on the part, you can add or remove any view. Just drag the view to be removed towards the top and away from the DetailCenter using drag&drop. If you select an entire component, the entire component will be removed; if you select the “Detail Views” entry, all generated views are removed. To add a view to a component just select the corresponding part and call the entry Additional Views via the context menu (see also: „Additional Views‟).
Page C.1 - 44
DetailCenter
Detailing To start the detailing just drag the desired parts onto the action button using drag&drop. The button will then temporarily turn red so that you know it is active. Let go off the mouse button and the parts are transferred. You can also highlight the parts and click on the action button with the mouse or select the entry Create 2D via the context menu. During detailing, the information line of views overview informs you about the estimated remaining time required for detailing the selected parts. This estimated time is based on the average value of the parts detailed in the current process and is an approximate value. .A detail block with the date and time of the detailing is created and saved on your hard drive every time the detailing process is activated. Every variation of the same type is thus still accessible later during the insertion process. You must save the model after the detailing has finished, since the modification management requires information that has to be written to the drawing. If you do not save the model, this information is lost.
Special Settings You have access to the hereafter described settings via the button SETTINGS.
Group Behaviour during Detailing Hide Part
The part is hidden in the model after detailing. You can e.g. at a detailing via direct part selection see directly from the model which parts still have to be detailed.
Page C.1 - 45
DetailCenter
Definition of Main View Within ProSteel, there are different variants to specify the main view (front view) of a shape for detailing. Experience showed us that in most of the cases it isn‟t enough to assume a firm guideline here because this specification is individually made by the executive design engineer and mostly also depends on the constructive environment. As it is a matter of component parts in the space, you cannot clearly define top/bottom or left/right. Front View based on the Part Coordinate System (A) Since each component part has its own coordinate system, a clear and constant main view can be specified with the help of this coordinate system. In case of standard shapes, the Y-axis of this coordinate system is always aligned parallel towards the web so that it can serve as reference axis for the plan view. The Zaxis normally runs in longitudinal direction of the shape. The direction of the X-axis determines the front view to guarantee that the plan view is always from the top to the web and that in case of non-symmetrical shapes (e.g. U- and L-shapes) in front view you can always look inside the shape. This is defined in this way for all shapes without any exception in favour of a uniform guideline from the 3D model. In case of symmetrical shapes, however, you can influence the later alignment by selecting an appropriate insertion direction. The figure on the left shows the part coordinate system of an L-shape (X, Y, Z) with the starting point S and the endpoint E of insertion direction. For detailing the front view, the coordinate system now is rotated in the way as shown by the new axes (X', Y‟, Z‟ and S' resp. E').
Front View based on the Global Front View (B) To avoid exchanging up and down you can determine two global front views. The view in the direction of the ”nearest” part coordinate axis is assumed as front view of the corresponding shape. To avoid the view on a cross-section you can define an alternative front view, which mostly has been rotated by 90°.
Page C.1 - 46
DetailCenter
You obtain the result that the position is always independent of the insertion direction of the part (base plates are always „at the bottom“), but the front view once can show the web and once the flange – depending on the rotation of the shape in the view. Tough, parts that are situated further back in construction are displayed as seen from inside. Select the entry Set Global Reference View in the context menu of the component parts list to specify the global front views. Then, you have to click into the model to get the cross hairs for selection. After that, you select the desired view direction of the front view and then the alternative view direction. When you press the ESC-key instead of selection the views are reset to the default values (0,-1,0) and (1,0,0). The current values are displayed in the information window. Front View based on the Outside of the Model (C) This variant is similar to the global front view. The difference is that instead of specified reference views you always choose the part coordinate axis, which show most clearly from the center of construction to the outside. This means that the front view is always what you would see from the outside if you looked towards the center of the whole construction. This method largely corresponds to human imagination, but depending on the rotation of the shape, once the web and once the flange can be displayed. The following example shows the effects of the selected main view on the 2Ddisplay of a shape:
Page C.1 - 47
DetailCenter
Positions 1-4 have been inserted at a rectangular, the Y-axis of the part is showing to the top and the Z-axis is showing in shape direction. The views A and B are the specified global front views. Depending on selection, you will get the front view displayed on the right. Specify Individual Front View (D) The last variant is that you can specify for each individual part separately which part coordinate axis has to serve as front view. In general, you can decide to use variant (B) or (C) and align unfavourable parts individually and independently. Select the entry Set Individual Reference View in the context menu of the component part list to specify an individual front view. Then, you have to select the desired part to get the cross-hairs for selection. After that, you choose the desired view direction of the front view. When you press the ESC-key instead of selection the individual front view of the part is deleted. The current value is displayed in the information window. Select the entry Reset All Reference Views in the context menu of the component parts list to delete the specifications for all component parts simultaneously.
Page C.1 - 48
DetailCenter
Other Views You have the option to add additional views to a part or to create manual details from entire model areas. Since the manual details are actually free views, they too are controlled via this dialog. You have access to this function via the button ÄDDITIONAL VIEW or via the entry Additional Views in the context menu. The following dialog window is also a non-modal dialog which means that you can change your part selection in the views list of the DetailCenter at any time.
Group Detail Style Selection List
The detail style that has to be used for a manual detail. When you select the option 'From 3D-Component Part', the style assigned in the component part list will be used. If the component part doesn‟t have a detail style, or if it is a view with freely selectable parts from the model, the default style will be used instead. It this style has not been defined, a manual detail cannot be created. By clicking on the small button on the right side of this field, you can edit the selected detail style. Please note that only those detail styles are displayed which have been classified for use in manual details.
Page C.1 - 49
DetailCenter
Group Given Views Input Field
Here, you can change the names for free views.
List
The available views, which can be added to the part, are displayed here. Select the desired view by clicking on it in the list. Already existing views are highlighted and cannot be selected.
Group Selection Input Field
Here, you see the currently selected detail style, which is used for a manual detail.
PICK VIEW
Click on this button to define the view level for free views by picking in the model.
ADD
Click on this button to add the selected view to the selected part.
MANUAL DETAIL
By clicking on this button, you can create a manual detail of the selected part or of any part selection from the model.
Pick on Plane
The points picked during definition of a view plane are projected onto the current view plane.
Add View If you want to add one of the six basic views, just select the corresponding view from the list and click on the ADD button. To add a free view, just select one of the free views 'View A to View F' from the list. The input field above can be used to change the name to get a more suitable one. Then, click on the PICK VIEW button to specify the UCS (origin, X- and Y-axis) to pick any view or use the ESC key to import the current view on screen. Finally, click on the ADD button. The added views are treated during detailing just like directly created views and automatically further processed.
Page C.1 - 50
DetailCenter
Manual Detail from the Model Select the first entry 'Detail Views‟ in the views list of the DetailCenter to create a manual detail with any part selection from the model. Now, click on the MANUAL DETAIL button and enter a name for the detail in the then opening input field. Then, pick any view by specifying the UCS (origin, Xand Y-axis) or use the ESC key to import the current view on screen. After that, you are prompted to select the parts, which are to be processed for this manual detail. A window similar to the preview opens, which displays the parts as 3D objects for now. You can now dimension manually, attach position flags or any 2D-lines and texts. Manipulations of these 3D-parts are possible as well since they are only copies from the model. Then you click on the modified CREATE 2D button, and the 2D-projection calculation for the 3D-parts is carried out. Of course, you can continue to work in this window, but you will not have the intelligent properties of the components available. Once you have finished your additions, save the window without renaming it. If you do rename it, the unique allocation for the DetailCenter is no longer active.
Manual Detail from Components You can also create a manual detail from construction groups or single parts without having to select the parts specifically in the model. Just select the entry of the desired part in the views list. The rest is the same as for the manual detail from the model apart from parts selection.
Page C.1 - 51
DetailCenter
C.1.10
Detail Block Overview (Insert)
If you have detailed all of the parts you can then insert the generated detail blocks into the workshop plans. You will see the saved detail blocks in this last work level, the insert list. Since most of the important points have already been discussed under Component Overview, here are just a few special commands of this work level.
Dialog Commands UPDATE Click on this button to search the current output directory of the DetailCenter once more. This is required if you detailed a new model drawing or if a manual copy of a complete detail folder was entered into the output directory.
EXPRESS Click on this button to start the InsertExpress for automatic insertion of detail blocks into the workshop plans as collective tabs according to a specified pattern.
Page C.1 - 52
DetailCenter
EXCHANGE Click on this button to exchange a detail block inserted into the 2Ddrawing for its detailed version with another detail style. Thus it is possible to exchange unfavourable detail styles of detailed component parts for more suitable ones without explicit assignment, detailing and insertion.
List of Detail Folder The default setting fills this list with the folder names, which are located in the detail folder of ProSteel. New details are always saved in a subdirectory of this detail folder. The name of that folder corresponds with the associated model drawing. Users should leave this structure as it is. However, you can select at short term another output path in the global settings of the DetailCenter so that – in special cases – you can access to other directories outside of the output path (detail path) created by ProSteel. Select Detail Library Just click on the corresponding list entry to select a detail library for insertion. Then, the list of existing detail blocks will be updated. Delete Detail Library To delete a detail library, click on the corresponding list entry and use the context menu to select the entry Delete Detail Library. All detail blocks including the folder are then deleted. Please remember that the program doesn‟t take into consideration possibly existing foreign files! ProSteel assumes that the detail libraries only contain detail blocks for insertion and that no finished drawings or other files are contained in these libraries.
Page C.1 - 53
DetailCenter
List of Details Here you will see all of the generated detail blocks as their own separate entries with date and time when they were created and you can check their current status. The display and sorting of the list depends on the settings of the work tools. Status Display The significance of these pictures matches the component part overview; please refer to that section for further details. If the detail block has already been inserted, the entry is marked with a checkmark. Preview Before inserting the detail block, you can display a preview. To activate the preview, just select the corresponding entry and then select the entry Preview via the context menu. A new drawing window opens displaying the result of the detailing in the form of a preview. This detail block can be processed as well. In case of modification, you mustn‟t change the name of the drawing on any account. Otherwise the detail block cannot be identified any more. Delete Detail Blocks Click on the corresponding list entry and select the entry Delete...Entry via the context menu to delete a detail block. Then, the selected detail block will be deleted in the detail library and will not be available any more.
Page C.1 - 54
DetailCenter
Insert Detail Blocks To insert detail blocks just drag the desired details onto the action button using drag&drop. The button will then temporarily turn red so that you know it is active. Let go off the mouse button and you can start inserting blocks. You can also highlight the parts and click on the action button with the mouse or select the entry 2D-Insert via the context menu. Insertion Every inserted detail block first appears in the current target drawing in its origin and can then be moved to the desired position within the drawing („sticking to the checkmark“). You can open several drawings and click on a drawing to set it as the active one before inserting the blocks. Any details will then be displayed there. You can track the parts you have just inserted if you have opened the info window. You can ignore this part insert or cancel the entire insertion process. Target Drawing In order to activate the modification mechanism the program has to know, into which drawing you are inserting the details. You cannot insert parts until the drawing has been saved. You should refrain from making any subsequent drawing name or folder changes as well. Although the DetailCenter has a verification function for “lost” drawings or details, you will save yourself a lot of time and effort by just leaving the plans where they are. The location for saving the plans should be considered beforehand. Revisions Once the details have been inserted into the drawing you can manually revise the drawing. Please remember that the single parts and groups are intelligent details. For further information please read the comments in the corresponding chapter of this manual. Ideally, you should optimize the detail style of the detailing in such a way as to eliminate any revisions. Only then the modification mechanism can function correctly, since subsequent changes in the details are otherwise lost if you select the modification function. It is however true that there are modifications which are automatically kept, too.
Page C.1 - 55
DetailCenter
US-Mark Numbering During insertion, you can issue component part numbers according to a US drawing standard. These marks (mostly consisting of sheet number, component part code and a continuous index) serve for identification of the workshop drawings of the parts within the model and within the parts lists. As in practice, each of these marks has an individual structure; they are based on a definition file describing the structure and value range of the marks. In the settings, you can select the current definition file to be used under 'US-Mark Numbering”. At first insertion, a small dialog opens if the 'US-MarkNumbering' option has been activated. This dialog can be docked beside the DetailCenter. The active fields depend on the default settings in the definition file. For each new inserted detail a component part index is counted up according to definition file. However, this index can be changed at any time. The resulting number (e.g. a1) will now be entered in the model into the field ‟Shipping Number‟ of shape characteristics and in the 2D drawing into the field „Shipping Number of Position Flag‟. The position flag display is changed to „Shipping Number‟. Click on the button NEW DRAWING to count up the index for the drawing number and the component part index will be reset to its start value. You can continue insertion in another drawing sheet. Drawing Synchronization When you are inserting the detail blocks, the insert information is saved to special files of the detail library. After all, it could be that you did not open the model when inserting blocks and opening the drawing in the background can be quite frustrating because very large models especially require a long computing time for this operation. Every time you open the model, the model drawing is compared and synchronized with these data. You should never delete these files until the synchronization process is finished and you have saved the model. The modification mechanism cannot function reliably if the program lacks the information telling it which part has been inserted into which drawing. Your work is better protected, if you do not delete the blocks and folders until after the assignment is completed.
Page C.1 - 56
DetailCenter
Special Settings You have access to the hereafter described settings via the button SETTINGS.
Group Behaviour during Insertion Remove Detail Block Each inserted detail block will be deleted on the hard drive immediately after insertion. However, this is only possible if the model drawing is open at the same time, as the program has to make some entries here. Please remember that the model drawing has to be saved afterwards. US-Mark Number
You can issue mark numbers as they are usually used in the USA at insertion.
Display Fields
Here, you see the definition file used for mark numbers including a short description. This file includes the format description of the numbers. If the program or project path is an element of the information, the part will only be displayed there as or .
Page C.1 - 57
DetailCenter
C.1.11
Global Settings
In addition to the settings of the different work levels, you can use this page to make the fundamental settings of the DetailCenter. However, you will also find special default settings, which are valid for several work levels at the same time and which are set centrally.
Page C.1 - 58
DetailCenter
Group Behaviour during Opening Load Model
When the DetailCenter is opened, the model is automatically analysed and the component part structure is displayed according to all default settings in the component parts list. Since this process may require some time in the case of big models, this function can be deactivated. You also can select the analysis of the model structure manually at a later moment via the button UPDATE in the component parts list.
Recompute
The group dimensions are calculated anew when the model structure is analysed. If you created e.g. a parts list before and the data therefore are current data, you may reduce loading time of the DetailCenter by switching off this option.
Bolts
When the model structure is analysed, all bolts of groups existing in the component parts list will be displayed as well. This allows an easy check of the used bolts, but the resulting great number of parts has a negative effect on the speed. This setting doesn‟t, however, influence the information about the bolts in-group details.
Workframes
When the model structure is analysed, the view levels of the working areas are also displayed as entries in the component part list. Normally, only planes are seized which also contain ProSteel component parts.
>Blanks too
The view planes containing no ProSteel component parts are seized as well. This option should be used when a master drawing is used the component parts of which are exclusively integrated via XREF‟s.
Standard Views
When the model structure is analysed, horizontal projection, plan view and anchor plan are also displayed as entries in the component part list.
Connection Gusset When the model structure is analysed, the gusset points of the construction (e.g. several connections) are also displayed as entries in the component part list.
Group Behaviour during Selection Show Part
The part (or complete groups) clicked in the list is (are) highlighted in the model. When another entry is selected, marking switches over to the new part.
Page C.1 - 59
DetailCenter
Synchronize Detail Style The program selects exactly the detail style the currently checked entry has in the component part resp. views list. When the dialog window for processing of detail style parameters is open, the corresponding settings are also directly displayed there. > List of Detail Styles dependent The detail styles displayed in the component part list depend on which type of part is checked. If you have checked for example a single part, only the styles classified for single parts will be displayed. Style classification is effected in detail style dialog. The result is that only the styles appropriate for the component part or function will be displayed later. > Parameter dependent The displayed parameter pages in the detail style dialog depend on the type of the checked component part. If you have e.g. checked a single part, the pages for groups will not be displayed. Synchronize Part List The DetailCenter is always updated to match with the active model drawing, if several drawings are open. Since this process may require some time, you can switch off this option in the case of big models. Update can be selected manually via the UPDATE button in the component parts list. In addition, you often don‟t want to update the lists while you are only looking up something in another drawing.
Group Others Update Preview
The preview of a detail is automatically updated when you modify a parameter in the detail style dialog window. In case of many modifications, it is however reasonable to deactivate the update first and to select it manually afterwards.
Use PlugIn's
External plugIn's will be integrated which allow an individual adaptation of the detailing results. A plug In-manager and additional dialog windows allow you to control further defaults which may be completely different depending on the supplier. At the moment however, there are no plugIn's supported.
Page C.1 - 60
DetailCenter
Search Joints
Here, you enter the maximum distance up to which the different single connections (these are recognized via the logical links) are combined to a connection gusset. For more detailed information please refer to „Gusset Details‟ in this chapter.
Modeller-Tolerance Here, you set the tolerance for contour calculation of the modeller. In some rare cases it may be that the contour cannot be determined correctly at 2D-derivation. This especially occurs when component parts having very small angles are rotated towards view direction. If you detect an incorrect behaviour or if the error message "Can't calculate Extents" is displayed in the command line of AutoCAD, you can set here a smaller tolerance value. Ground Zero
Here, you enter the height level which correspond to the X-Yplane in the model with the height Z=0 (world coordinates). For detailing of groups and overviews it is thus possible to display correct height dimensions. Thus, you can start with a model at z=0 which should however correspond to the height level -700 of a building plan for the coordinate dimensioning.
Base Plane (z)
Here, you enter on which height (z-coordinate) the plane for the plan view and for the anchorage plan has to be laid in the model (world coordinates). When you indicate the value , the deepest point which exists in the model will be taken. The effect will be that any concrete foundations beneath supports existing in the model don‟t have an influence any more.
Connection
Here, you enter how the connection gussets have to be displayed. Only Gusset – only the entry for the complete gusset is displayed. As Structure – The entry for the complete gusset is displayed and, subordinate to this gusset, the single connections, too. Thus it is easy to check which connections are combined.
Page C.1 - 61
DetailCenter
Multiple
Here, you enter how combined weld shapes are displayed. Only Shape – Only the entry for the complete weld shape is displayed. As Structure – The entry for the complete weld shape is displayed and, subordinate to this shape, the single components, too. Thus it is easy to check out of which components the shape consists. In addition, it is possible to create each single component individually as a detail.
Pos. No.
Here, you enter a general format template for the position number of weld shape components. This number is used as an alternative, if there isn‟t any position number known from the 3D-model. For more detailed information please refer to „Weld Shapes‟ in this chapter.
View Depth
Here, you enter the distances for the plan view plane and for the anchorage plan of the sectional area.
Group Display Templates Parts
Here, you set the desired template for sorting and filter of the component parts list. In the display field, the currently selected template is displayed. Click on the small button (...) on the right side of the display to select another template. Click on the small button (x) to reset the display to standard display. Only the templates you created before via display sorting of component parts list will be offered for selection. If, in the mean time one of these templates has been changed, the modified display will be shown, too.
Views
Here, you set the desired template for sorting and filter of the views list. Selection is analogously to the one for component parts list.
Insert
Here, you set the desired template for sorting and filter of the insertion list. Selection is analogously to the one for component parts list
Page C.1 - 62
DetailCenter
Group Configuration Files Application Path
Here, you can see on which path the details will be stored later. A subordinate directory with the model name is created there. You can modify the path by double-clicking on the field. It is however recommended to avoid modification of the path unless it is absolutely necessary!
Program Path
Here, you see the complete path of your ProSteel installation. If other displayed paths are further subordinate directories of this program path, the corresponding part is only displayed there as .
Project Path
Here, you see the complete path of your current project in the case that project management is used. If other displayed paths are further subordinate directories of this project path, the corresponding part is only displayed there as .
Translation File
Here, you see the desired translation file for drawing labelling. In the display field, the currently selected file is displayed. Click on the small button (...) on the right side of the display to select another file. Click on the small button (x) to reset the display to standard default. If the program or project path is an element of the information, the part will only be displayed there as or .
US-Mark-Number
Here, you see the definition file used for US-mark numbers. This file includes the format description of the numbers. Selection is analogous to translation file.
Dialog-Commands TEMPLATE Click on this button to save your settings of the DetailCenter in a template or to select one of these templates. In this template, the individual settings of all work levels as well as the global settings are saved. Display sorting and filters can only be processed by indicating the corresponding templates in the global settings of the DetailCenter. When you have defined one of the templates as “favourite”, this allows fast selection from the neighbouring selection list.
Page C.1 - 63
DetailCenter
C.1.12
Automatic Translation
ProSteel permits a multilingual labelling of drawings, which is controlled by a translation database. This database can be freely edited so that it is possible to add any language you like. The form of the translated terms (e.g. only as abbreviation) can also be adapted to the corresponding requirements. Before you can work with the translation database, it has of course to contain the currently used terms. For this reason, the model can be searched automatically for new terms of the object properties (like name, note, etc).
Edit Data Base Please select the context menu in the component parts list of the DetailCenter and click on the entry Edit Translation. The following dialog opens.
List
Here, you can see the terms of the database, which have to be translated. If you click on one of these terms, it will be displayed in the Original Text field and you can add or revise the translation. Please note that only those terms are displayed, which exist in the database at the very moment. Therefore you have to update the database after having modified the model.
Language
Here, you select the language, which has to be translated.
Original Text
Here, the current entry from the list will be displayed the translation which you can edit.
Page C.1 - 64
DetailCenter
Translation
Here, you can enter the translation of the currently selected term. Click on the INSERT button and the entry is accepted as translation into the selected language. If the term has already been translated into the selected language before, the translation will be displayed. Click on the MODIFY button and the translation will be modified correspondingly.
All Entries
If this field has been checked, all entries available in the database are displayed in the list of the terms, which have to be translated.
Unknown Entries
If this field has been checked, only those entries are displayed in the list of which a translation into the selected language is not yet available.
File Path
Here, you see the path of the translation database. Click on File button to modify the database. Click on this button to modify (select) the translation database. Click on this button to save the translation database.
Click on this button to add a new language to the database. Click on this button to add the entry in the Translation input field as translation of the Original Text entry in the selected language. Click on this button to replace the current translation in the Translation input field as translation of the Original Text entry in the selected language. Click on this button to delete the current translation of the Original Text entry in the selected language.
Page C.1 - 65
DetailCenter
Update Database After having modified the model, you should search the model for new terms for the translation database. These terms are taken from the object properties so that own comments or component part names for the position flags etc., which were inserted there, can be translated. The program tries to synchronize the entries with those of the shape database of ProSteel so that not modified shape names are not displayed in the translation. Please select the context menu in the component parts list of the DetailCenter to search in the model. Click on the entry Enlarge Translation from Model. The model is searched for new terms and these are imported.
Page C.1 - 66
DetailCenter
C.1.13
Transfer Drawing Paths
This function permits you to transfer the drawing numbers saved in the drawing database or the file paths of the workshop drawings to the component parts properties of the model drawing. It is possible to display the drawing numbers of the processed details in the position flags of an overview. In addition, it would also be possible to export the parts data via ProSteel standard interface and to have them evaluated by foreign programs.
Start Transfer Please select the context menu in the component parts list of the DetailCenter to click on the entry Take over file Paths. Then, you still have the possibility to verify the drawing database of the model, if in the meantime you moved some details or modified the drawing numbers. After the drawing verification was finished (or if you don‟t want this option) the following dialog opens:
Group Data Selection Data Selection
Here you specify which data have to be transferred into the component parts properties. In addition, you can still add any extra text. Drawing Number – The drawing number of the corresponding 2D drawing will be transferred.
Page C.1 - 67
DetailCenter
Only File Name – Only the file name of the 2D drawing is transferred (without specification of the path). File Path – The complete file path including the drawing name of the 2D drawing will be transferred. Only Text – Only the specified text of the 'Prefix' input field would be transferred. Prefix
Here you can specify a text which has to be placed in front of the real data or which has to be transferred as only text (option Only Text).
Postfix
Here you can specify a text, which has to be placed behind the real data.
Group Target Target
Here you specify into which property fields of the parts the data have to be transferred. Note 1 – The data are transferred into the note field 1 of the parts properties. Note 2 - The data are transferred into the note field 2 of the parts properties.
Group Links
Only the data of the corresponding group are transferred to each part in the model; e.g. detailed stiffeners are marked with the reference to the corresponding group drawing.
Equal Positions
The data are transferred to all component parts having the equal position number (separated according to single part and group) and this even if only the workshop drawing to one of these positions exists.
Remove before
In all component parts, the contents of the selected property field are removed before transfer is started. All existing entries are overwritten, this would, however, permit to transfer and display the drawing numbers of all parts first and then only the drawing paths of the groups (the drawing numbers of the single parts would thus be deleted again).
Now, click on the OK button to transfer the current entries of the drawing database in the component parts properties.
Page C.1 - 68
DetailCenter
C.1.14
Drawing Verification
Each time when you insert some details in a drawing, a dependence of the component part on the workshop drawing and vice versa will be saved in the drawing database of the model drawing. These saved dependences later permit an automatic update of the workshop drawing or the transfer of drawing numbers to the component parts properties of the model. These links are the reason for your having to enter a valid drawing name of the destination drawings before insertion of details. It is also the reason for your having to save the model after insertion. Nevertheless it may be that you have to modify the physical position of the 2Ddrawings after the complete detailing was finished. This is the case if you have to save them in an assembly folder of the order in the network. In addition, it may be that you want to move some details from one drawing to the other in order to add some completions or just because there is not enough place in the drawing any more. However, if the model has saved the wrong dependences, and the DetailCenter thus cannot function completely as it should, you can correct this subsequently. This correction partly is carried out automatically, partly by means of your manual support. It is divided into the two areas Drawing Path Verification and Detail Verification.
Start of Verification Please select the context menu in the component parts list of the DetailCenter and click on the entry Check Dependences. After the note that this function may require some time and that if need be you can cancel the function the verification starts. At first, it is verified whether all paths of workshop drawings saved in the drawing database still exist. Then, the drawings, which were not found, are displayed in the dialog. Now, you have the possibility to set the paths or drawing names anew.
Page C.1 - 69
DetailCenter
Group Invalid Drawing Paths Click on this button to change the path of all displayed drawings at the same time and start a new search. Then, the list either contains the remaining drawings, which are still lacking or the verification function changes to detail verification. If you only changed the physical position of the plans on the hard drive, you don‟t have to make any further corrections. Click on this button to change the path and/or file name of a certain drawing selected before in the displayed list. If a drawing was renamed or if a certain drawing was saved on another physical place, you can thus make the necessary corrections. Click on this button to ignore the selected drawing during the following verification. Thus you can also remove deleted drawings. Please note, however, that you cannot add further drawings. If therefore you copied and renamed a drawing, please assign the new name to it instead of ignoring the drawing. After verification of paths was finished, and any necessary corrections were made, the program passes on to the verification of the details contained. It is now verified whether all details are contained in the original or now modified drawings.
Page C.1 - 70
DetailCenter All the details, which were not found, are now displayed in the list. You have thus the possibility to link any moved details anew or to remove deleted details.
Group Details not Found Current Search Path The current search path used for the ‚Search Detail' option is displayed in this field. You can modify the path by clicking on the right button beside the display. Click on this button to search for any details not found in the drawings of the current search path. For this purpose, each drawing will be opened in the background and searched for all listed details individually. Please note that each file having the extension *.dwg will be opened, as it could be a workshop drawing. This means that also any existing ProSteel-models or other AutoCAD-drawings will be opened. You should therefore take care that only 2D-plans with details are in the list to avoid unnecessary waiting periods.
Click on this button to specify the new drawing where a certain detail is which was selected before in the list. Then, it is verified at once whether the detail is really situated on the new drawing.
Page C.1 - 71
DetailCenter
Click on this button to ignore the selected detail; the original entry is kept. Thus you can also remove deleted details as you can remove the detail hints from the drawing database after end of verification. Please note, however, that you cannot add further details. If therefore you moved a detail, please assign the new drawing to it instead of ignoring the detail.
End of Verification After the verification has been finished, the assignment is structured anew and the drawing database is updated. You still have the possibility now to remove the ignored or invalid detail hints from the drawing database. If you refrain from doing this, the original entries of these details will be kept and you can repeat the verification at a later moment.
Including Ignored
If this field has been checked, the detail hints on ignored drawings will be taken into consideration, too for correction (all details giving a hint of these drawings are set as ignored details). Otherwise, these are not affected in order to avoid destroying hints to temporarily moved drawings.
Delete Ignored
If this field has been checked, the hints of 2D-drawings of all ignored details will be removed as well. The data base entry with possible further information is however kept.
Delete Invalid
If this field has been checked, the data base entries of any details, which were not found, will be completely removed. Otherwise, only the hints of 2D-drawings of these details will be removed.
When you click on CANCEL in this dialog, the data base will not be modified.
Page C.1 - 72
DetailCenter You can repeat the verification process at any time you like by means of correction. Thus you can first look at the result of drawing verification in a text file (model name_LogFile.txt) which are situated in the subdirectory ..\detail of your ProSteel installation. There, you will find a list of all workshop drawings linked with the model as well as the status of the details expected to be there. ; ProSteel for AutoCAD – Drawing Verification ; ------------------------------------------[HEADER] Verification file=h:\testmodel.dwg [drawing file: h:\testmodel_views.dwg] Status=moved or deleted view hall_FRONT=can not be found [drawing file: h:\testmodel_details.dwg] Pos 2 (HE 140 B)=valid Pos 47 (PLATE 10x137...191)=not found BG 3 (HE 200 B)=valid BG 9.1 (HE 200 B)=valid
Page C.1 - 73
DetailCenter
C.1.15
Direct Detailing
The ProSteel DetailCenter can also be used to detail parts directly from within the model or display a preview of the detail. This means dimensions of construction groups can be checked, or only a few selected parts within a complex building, which are urgently needed, can be detailed. Perhaps area classes have not been used, but it is now desired to detail a special truss. Large models pose the problem of being able to identify this part directly. The DetailCenter offers a few helpful tools, but the following method is even easier: To detail a component part directly from within the model, select a default detail style first, so that parts without a detail style can be detailed. Now highlight the parts to be detailed within the model and then select the context menu via the right mouse button. Depending on the parts selected, a preview can be created from a single part or a group or these parts or groups can be detailed directly. Select the desired function from the context menu.
Page C.1 - 74
DetailCenter
Processing of Nested Structures You can only select the next higher hierarchic plane. Therefore, if you have selected a component part of a subgroup, only this subgroup can be detailed as component part group. On the other hand, at detailing of an assembly including add-on parts only the directly subordinate single parts resp. groups will be processed. Direct Detailing If you want to work with direct detailing, you will be prompted to specify if all of the selected parts without a detail style are to be linked with the default style first. If you confirm this question, these parts will be highlighted in the DetailCenter as well since the linking is permanent. If you answer no to the question, only those parts are detailed, which already have a detail style. The parts will then be directly detailed or the preview is displayed. Direct Detailing with Insertion If additionally valid and saved 2D-workshop drawings are open, the parts can even be inserted into the drawings directly after detailing. In the context menu, a list of the valid drawings will be displayed in a subordinate tab of the corresponding detailing selection (respectively the entry Detail Library for 'Not Insert'). If such a drawing is selected, you will directly reach the insertion mode for the selected drawing after detailing has been finished. The parts can be placed there.
Page C.1 - 75
DetailCenter
C.1.16
Modification Management
The modification management is one of ProSteel‟s special DetailCenter features. Once the model has been detailed and any resulting detail blocks have been distributed to the different workshop plans, the detailing or processing is considered finished. The next time you load the model most of the entries will appear in green – this colour signifies that the detailing of these parts matches the original parts of the model. However, if you have changed parts of the model they will be shown in red. This tells you that the detail blocks (and thus maybe the workshop drawings as well) are no longer current and have to be updated. The program performs this update. Status Indicator Valid Details Blue
A detail block of this part has already been created. However, it has not yet been inserted into a 2D drawing.
Green
A detail block of this part has already been created and inserted into a 2D drawing.
Modified Details Yellow
A detail block of this part has already been created. However, it has not yet been inserted into a 2D drawing.
Red
A detail block of this part has already been created and inserted into a 2D drawing.
Open a Drawing from Within the DetailCenter Just click on a part in the component list of the DetailCenter to have a quick look at a certain workshop drawing. Now select the context menu and use the entry Open 2D drawing to automatically open the drawing containing this detail – presuming it has been inserted.
Page C.1 - 76
DetailCenter
Update Drawings Any parts highlighted in red can be updated automatically. Select a specific component or a parent and only the parts contained in these are updated. If you select the "Model" entry, all parts are updated. Selecting the context menu after having selected the part, use the entry Update only modified 2D-drawing to activate the modification mechanism. However, if you want to force also an update of non-modified (green) parts to replace e.g. the detailing by another detail style you have to select the entry Update 2Ddrawing in the context menu. One by one, all of the affected drawings are opened in the background, the parts are newly detailed and inserted directly into the original drawing position, replacing the old ones. Should you have one of these drawings open at the time, you can watch this replacement happen “live” right in front of you. Subsequent Modifications Depending on the settings in the work tools of component overview, modifications of the details, which you carried out later, will be adopted again. This is of course only possible to a limited extent. At the very moment, moving of position flags, weld marks, height indicators and of dimension texts in all 2D-drawings as well as modifications of sketch display at overviews are adopted. If a dynamic drawing parts list possibly exists, it will also be updated in the case the component parts have changed. Please note, however, that only the position of the dimension text can be restored (in the case that you “sorted out” unfavourably placed texts), but not the dimension itself or modifications of the dimension text. To avoid a reset of such modifications, you can protect them against update. This procedure might take some time to complete; then all plans are once again current and the latest detail blocks are ready for insertion. Use the „Display only Latest Blocks‟ option for the insertion to place the details. You should remember, however, that the modification mechanism functions optimally only if the tips and notes from the previous chapters are observed and if you proceed correspondingly at 3D-modelling and positioning as well. You should, therefore, work through those chapters very diligently.
Page C.1 - 77
DetailCenter
Anchorage Point In the 3D-model, it is possible to use the command Set Anchorage Point to create an anchorage point which can serve as a reference point for the inserted overviews. The result will be that the modified detail blocks are inserted congruently relating their anchorage points. If you place e.g. a horizontal projection, a longitudinal section and a crosssection aligned with each other and you don‟t make use of an anchorage point, the views will probably be displaced towards each other when up-dated. Normally, they are inserted in a centered way and the center point of course moves when the size of a single view is modified. Use the „Anchorage Point“ option for the insertion position in the detail style at detailing to make use of the anchorage point. For overviews, this should always be done beginning with the first detailing when the deternination of views is required. If need be, it may also be modified. Here you see a 3D-model and three detailed views which have been favourably placed towards each other after insertion. Now, the drawing is up-dated after a modification, first with and then without anchorage point. The anchorage point (A) has been inserted at the highlighted spot into the 3Dmodel. In the views, the position has also been highlighted to make things clear.
Page C.1 - 78
DetailCenter
Afterwards, the construction is modified so that the overall dimensions (and thus the sizes of the views) change. After the update without anchorage point the position is clearly shifted from the highlighted reference line (manual completions would of course remain at the former position). Due to the additional dimensioning chains, the longitudinal view and the gable view shift towards each other in the base plane.
On the other hand, when the update is carried out with anchorage point, the position of the elements towards each other is kept as it was in the original drawing. The base planes remain aligned to each other and manual completions at unchanged parts remain still suitable.
Page C.1 - 79
DetailCenter
Page C.1 - 80
DetailCenter
Protection against Update To exclude modifications of dimensions, position flags, weld marks or height indicators completely from being updated, you may protect them or set them free again. This is recommended for example for subsequent modifications of dimension texts or in the case dimensions were completely moved. During automatic update of the 2D drawing, the program now checks whether e.g. a dimension has been protected. If this is the case, this dimension is kept exactly as it is and the corresponding „new“ dimension is deleted from the updated detail. The result may be that the position or the dimension text won‟t match any more. Therefore, this option should only be used in the case you assume slight modifications (such as modifications of display or of position numbers) which only have few influences on the dimension. Since in future versions keeping of modifications will become more and more efficient, this protection against update is only a temporary help, which will become superfluous again later. The adoption of modifications combined with the efficiency of the automatic mechanisms of ProSteel requires an enormous amount of time and energy in program development. This is the reason why modification management will only become perfect according to our requirements step by step. Select the entry Protection against Update in the component parts list of the DetailCenter to protect the dimension or the position flags; weld marks, etc. against update or to release them again. Then, the following dialog opens which is described below.
Page C.1 - 81
DetailCenter Group Selection-Filter Selection-Filter
Here, you can enter the filter for automatic object selection. Only those objects will be taken into consideration, which meet the filter condition. Select Objects – You specify manually by your selection, which objects have to be protected or released. No filter will be applied in this case. All Objects – All objects in the drawing are automatically selected without applying a filter. Processing of course only refers to dimensions, position flags, weld marks and height indicators. Dimension – Only dimensioning objects are automatically selected in the drawing. Each Flag – All position flags, weld marks and height indicators are automatically selected in the drawing. Only Position Flags – All position flags are selected in the drawing. Only Weld Marks – All weld marks are selected in the drawing. Only Height Indicators – All height indicators are selected in the drawing. Click on this button to activate the protection against update for the selected objects unless it already exists. If you have checked the entry „Select Objects‟ as selection filter, the desired objects have to be selected first. Click on this button to remove the protection against update for the selected objects if they have one. If you have checked the entry „Select Objects‟ as selection filter, the desired objects have to be selected first.
Of course, this function has to be applied in the 2D-workshop drawings and not in the 3D-model. Please also remember that you cannot compare the protection against update with a blocked layer. If the dimension to be protected was only on a blocked layer, it would be kept there, but the newly created (synonymous) dimension would not be deleted.
Page C.1 - 82
DetailCenter
Reset Modifications Before the first detailing takes place, the drawing should be initialized, i.e. it should be set to „zero“. This will ensure that the modification mechanism functions optimally. This can of course always be done if you want to continue your work on a neutral state. As the component parts in the model remember their modification even during modelling, it may be that the corresponding markings have already been set. This could cause some irritations. Select the entry Reset Modification Code via the context menu of component parts view to reset any existing information about model modification. The entries, which details are situated on which drawings, are kept as well as the already detailed detail blocks. Please select the entry Initialize All Anew from the context menu to reset the model completely. Initialize Component Part selectively resets the currently selected component part. Please note, however, that now any information will be deleted (unless the assigned detail styles)! It will then no longer be possible to ask the model where the different component parts were inserted or to insert component parts already detailed but not yet inserted. This complete initialization is reasonable if you made some detailing beforehand „as a test“ or for a meeting and you now want to create the final workshop plans.
Page C.1 - 83
DetailCenter
Drawing List At any time, ProSteel can create a drawing list giving you a survey on the inserted details and their status of modification. This drawing list is based on the current entries in the drawing database and on the status of the so-called “modification flags” of the component parts. Therefore, it is recommended to verify the drawing first. The program automatically offers this drawing verification after the function has been selected. It is of course also possible that hints which were recognized as invalid shall nevertheless remain valid because the drawings have only been moved temporarily. Creation of File Select the context menu of the component parts list and click on the entry Output of Drawing List. A text file (Modelname_DrawingList.txt), will be created in the subdirectory.. \detail of your ProSteel-installation containing first a survey on all 2D-drawings and the number of inserted details. If one of these details has been checked as modified in the DetailCenter, this drawing is reported as being modified. Therefore, this statement doesn‟t mean that the drawing has actually already been modified. It means that it still has to be modified. In addition, you will find a detailed list per drawing, which details (position numbers) are contained and which of them has already been modified in the model. On the following page, you will find an example of a drawing list. Since an external program via code words might evaluate the content of this list, the output of these key words is always in English. As you can see in the example, there are 6 single parts (2 of them modified) and 2 groups in the drawing with drawing number ABC_PL03. Therefore, the drawing is checked as being modified.
Page C.1 - 84
DetailCenter ; ProSteel – Drawing List ; ----------------------------------------------------[HEADER] Created=02-04-2003 * 11:34 AM ModelFile=h:\testmodell.dwg FileContent=Drawing list and object reference Drawings=3 DrawingNumber|Changed |Parts |Groups |Views |DrawingFile =============|========|========|========|========|======================== ABC_AN01 |no | | |2 |h:\testmodel_view.dwg ABC_BG02 |yes | |5(3) | |h:\testmodel_bg.dwg ABC_PL03 |yes |6(2) |2 | |h:\testmodel_plates.dwg [h:\testmodel_views.dwg] DrawingNumber=ABC_AN01 Changed=no Parts= ChangedParts= Groups= ChangedGroups= Views=Hall_SEI_R,Hall_X_1 ChangedViews= [h:\testmodel_bg.dwg] DrawingNumber=ABC_BG02 Changed=yes Parts= ChangedParts= Groups=3,7,10,31,49 ChangedGroups=3,7,31 Views= ChangedViews= [h:\testmodel_plates.dwg] DrawingNumber=ABC_PL03 Changed=yes Parts=35,38,40,43,45,46 ChangedParts=40,46 Groups=50,55 ChangedGroups= Views= ChangedViews=
Page C.1 - 85
DetailCenter
C.1.17
Replace Detail Blocks
This function allows new detailing of detail blocks directly in the workshop drawing by simple selection. This permits you for example to assign a better detail style to some “unfavourable” details still during insertion.
Settings Display Field
Here, you see the currently selected detail style used for replacing.
List
The available detail styles for new detailing. When you have activated the option „List of detail styles dependent on Part‟ in the global pre-settings of the DetailCenter, only the styles are displayed here which have been classified for the corresponding type.
Page C.1 - 86
DetailCenter
Click on this button to process the currently selected detail style. The detail block is replaced with the modifications. Please note however, that this function actually changes the detail style of the model. If it is still required, you first have to make a copy and use this copy to replace the detail block. Click on this button to detail the detail anew with the currently selected detail style; then it is replaced in the drawing.
Click on this button to select a new detail block for replacing.
Replace a Detail Block To replace a detail block you have to open the corresponding 2D-workshop drawing (with the inserted detail blocks) as well as the original 3D-model drawing. Now select the entry Replace 2D-Detail Block in the context menu of the component part list. Then pick any element of the detail block you want to replace and the dialog opens. Now you can modify the current detail style or select another style from the list. Afterwards, you press the UPDATE button, and the detail block will be automatically replaced. Further detail blocks to be replaced can be selected directly from the dialog. Since the last selected block remains connected, you can assign another style to it if the result didn‟t meet your requirements. When modifying detail style parameters please don‟t forget that you change the detail style from the model. Replacing takes place as follows: The selected block is detailed anew (this is why the model drawing has to be opened) and then it replaces the former block in the drawing. If you assign a new style as well, this modification will be transferred into the model and the component part will be permanently linked again with the desired style. Therefore, don‟t forget to save the model drawing afterwards.
Page C.1 - 87
DetailCenter
Page C.1 - 88
Detailing Style
C.2
Detailing Style
C.2.1 Working with Detailing Styles The detailing style offers you some decisive influence over the style of the detailing because it is here that you determine what is to be dimensioned, how to dimension it, what texts to include, whether to attach position flags, and much more. A great number of parameters are available to specify the appearance of your drawing. You can save and load these styles individually and even import or export them from other parties. Since it is possible to manage entire parameter records you can create specific styles for specific detailing tasks (e.g. for overviews, workshop plans, life-sized displays, etc.) and just select them later. Your main task consists of defining the suitable styles once. The program offers the option to immediately check each change using a preview feature (see DetailCenter / Preview) – until details look exactly like you want them to be for your orders. This chapter will discuss the setting options first with an example of a detailed component at the end of the chapter. The chapters describing the detailing process also describe how to work with styles.
Saving Styles Normally, the detailing styles are saved together with the 3D-model of the drawing. This means that you always have to save your model if the modifications of detailing styles are to be kept permanently. In addition, there is the possibility to write a detailing style as file on the hard drive and to re-import it. It is also possible to replace only partial sections of a style. This permits you to exchange, update or transfer the detailing styles of different models. Furthermore, you can create a collection of detailing styles and use in the model only a selection of those styles, which are required for that moment. As the volume of a detail style considerably increased compared with earlier versions, since version 17.2 the file will only be saved as binary file with the file ending *.stx due to long loading times. All commands for loading a detail style wait for the style files in this format.
Page C.2 - 1
Detailing Style
C.2.2 General Info When you select the detailing style, a dialog with a tree structure appears on the left where the different dialog pages are sorted hierarchically in groups according to different areas. When you click on an entry in the tree, the assigned dialog page opens on the right and you can modify the values. If you move to another entry, your previous entries are saved and the new page will be displayed.
To allow a clear view, some of the tabs have subordinate tabs themselves which are accessible via a button or via a context menu (right mouse key) and which are used for further settings. in most cases, these are settings which depend on the selection on the corresponding dialog tab. The commands of the dialog frame are the ones all dialog tabs have in common. Only the new specific commands will be described here. The other commands are found in the general description of ProSteel-dialogs.
Partial Loading of Style Parameters If you want to combine e.g. the default settings for dimensioning and the default settings for labelling of two existing styles to a new style, you can do this by partial loading of pages. Select the desired page in the selection tree and then call the context menu by pressing the right mouse button. Now you have the possibility to replace the parameters of the currently selected page by the equivalent parameters of an existing style file. Alternatively, you can however also load all the pages subordinate to this page to replace a much bigger set of parameters.
Page C.2 - 2
Detailing Style
Dialog-Commands SAVE When you click on this button, the complete detailing style is saved in a file on the hard drive. This file has the name of the style and the file ending *.stx. It is possible to load this file later into this or into another model or to transfer it to thirds. SAVE AS Click on this button to save the detailing style under another name on the hard drive. Your detailing style copy automatically gets the name of the style pre-set here as file name. It is possible to load this file later into this or into another model or to transfer it to thirds. UPDATE PREVIEW When you click on this button, preview detailing of a detail is calculated anew and updated if the window is open. Within the DetailCenter you can look in a preview on the effects of a detailing style for detailing of a detail. Normally, this preview is automatically updated at each modification of the detailing style. However, if you have e.g. a very complex overview which requires a lot of time or if you want to modify a lot of parameters, you can switch off the automatic update and release it manually.
Page C.2 - 3
Detailing Style
C.2.3 Global Settings This is the tab for global default settings ranking higher than all other tabs. If, for instance, dimensioning is deactivated, no dimensioning will be carried out independent of what has been indicated in the individual dimensioning tabs.
Tab Common
Group Display Projection Method
Here, you specify the system according to which the different part views (front view, plan view, top view, etc.) are aligned towards each other. Method 1 (E) – The distribution of the views is effected according to DIN. Method 3 (A) – The distribution of the views is effected according to American standard.
Alignment
Here, you specify the alignment of the details at detailing. At groups, the main part specifies the alignment of the whole group. Horizontal – The parts are aligned horizontally when detailed. Vertical – The parts are aligned vertically when detailed. Like Model – AutoCAD aligns the parts during detailing according to their WCS position, which means that a slanted support remains slanted.
Page C.2 - 4
Detailing Style Front View
Here, you indicate how the front view of a component part has to be specified. The other views then derivate from this front view. From Component – The element coordinate system of the component part is used for the determination of the front view. From Global Views – The global views are used for the determination of the front view. Outside Model – The view from the outside into the model is used for the determination of the front view. Individually per Part – The individually fixed front view of a part is used for the determination of the part‟s front view. If it has not been defined, the element coordinate system will be used instead.
Like Group
Single parts views are displayed according to the views of the corresponding groups, if existing. The left view of a stiffener is e.g. the view onto a plate (normally this would be the plan view), because the left view of the group would show the stiffener in this way.
> Only first View
Only the first view of the part is displayed corresponding to the group; all other views are tilted according to standard related to this modified view.
True 2D Lines
The details are transformed into pure AutoCAD line diagrams. Intelligent properties of the 2D-details of course won‟t be available any more.
ACIS if Plates
Poly-plates are always temporarily transformed into ACIS elements for detailing to allow for better dimensioning of radii. The plate properties in the model are not affected by this.
Don’t scale parts
The parts keep their original size and only the text is scaled for output on a printer /plotter.
Scale
Here, you set the scale of your details. Depending on the selection under „Don‟t Scale Parts‟ either the part or the text size is scaled. Please remember the hints under 'DetailCenter/Generalities Concerning Scale and Dimensioning Styles'.
Page C.2 - 5
Detailing Style Group Add Dimensioning
Dimensioning texts and lines are attached according to the settings entered in the DIMENSIONING tab.
Position Flags
Position flags are attached according to the settings entered in the POSITION FLAGS tab.
Weld Flags
Welding symbols are attached according to the settings entered in the WELDING SYMBOLS tab.
Labels
Additional label texts are attached according to the settings entered in the ADDITIONAL TEXTS tab.
Tab Common PartialViews Here, you specify which views of a part will be displayed and whether these are limited in their visual depth. However, you can also make use of the automatic process of the program, which determines the required views due to the processing.
Group Partial Views Automatic Selection The program automatically displays the required views according to the existing detailing processes of the part. Thus, all detailing processes can be displayed and dimensioned. In addition, you can add the basic views, one or more global isometric views and the unwinding (only in case of bent plates). These views will be used in any case.
Page C.2 - 6
Detailing Style Cut
A cut is made in this view frame for any model views you like. Position, cut depth and displayed parts are determined by means of this frame.
Default
You can choose the views to be generated from the six existing basic views. In addition, you can add one or more global isometric views and the unwinding (only in case of bent plates). Here, you also pre-set the desired views for the overviews of detailed points; for standard overviews, however these settings haven‟t any meaning,
> Selection
Here, you pre-select which views have to be created during the detailing process. In the DetailCenter, you also have the possibility to delete views or to add further views.
Group Visual Depth Max. Depth
Here, you can indicate a visual depth up to which the subparts are seized at construction group display. This filter can be switched on separately for the different views to limit the depth only at left and right views.
Limit View Depth
When displaying construction groups, the visual depth for the selected view is limited to the value specified under 'Max. Depth'. Please note, however, that unlike cut areas at views nevertheless the complete component part will be displayed. The specification of this value only serves as depth filter for seizing of the complete component part.
Group Miscellaneous Distance Views
Here, you specify the distance of the basic views incl. dimensions and text towards each other if several views are to be generated within one detail block.
Distance Isometries Here, you specify the distance of the isometric views towards the basic views and towards each other. Distance Unwinding Here, you specify the distance of the unwinding of a bent plate towards the basic views. Detail Style Isometry If need be, you specify another detailing style here with which an isometric view has to be depicted. If you indicate „This Style‟, no separate detailing style will be used.
Page C.2 - 7
Detailing Style Isometry Position
Here, you specify the position where the isometric views have to be depicted with reference to the basic views. They can be positioned above, below, on the left or on the right side of the basic views.
Detail Style Unwinding If need be, you specify another detailing style here with which an unwinding has to be depicted. If you indicate „This Style‟, no separate detailing style will be used. Unwinding Position Here, you specify the position where the unwinding has to be depicted with reference to the basic views. They can be positioned above, below, on the left or on the right side of the basic views. Insertion Position
Here, you specify the grip point for the later insertion of detail blocks. Select where to position the detail block from the 9 striking insertion points below-left up to above-right (also for 2D-Update). When the additional option anchor is used here, it is possible to update the detail at overviews without having to modify the position of geometry. For more detailed information about the anchorage point, please refer to chapter „DetailCenter / Modification Management‟.
Combination of standard views with an isometric view (A) which is depicted with its own detailing style. The isometry here only shows the position flags so that they can be omitted in dimensioning.
Additional depiction of unwinding of a plate (B) and an isometric view (A) with regard to the basic views at a bent plate.
Page C.2 - 8
Detailing Style
Tab Common SelectionClass Filter logic permits you to make the detailing styles displayed in the DetailCenter for selection conditional upon the currently selected part. In addition, an assignment of detailing styles depending on the part is also available in the DetailCenter Express. On this tab, you can define where the corresponding detailing style has to be visible to limit the selection to a few reasonable styles.
Group Single Parts All Single Parts
The detailing style is visible everywhere where single parts are concerned. Otherwise, it will not be displayed. If this option is deactivated, the visibility can be limited even further to certain types.
> Straight Shapes
The detailing style is only visible when it is a matter of straight shapes.
> Bent Shapes
The detailing style is only visible when it is a matter of bent shapes.
> End Plates
The detailing style is only visible when it is a matter of end, base or other connection plates.
> Plane Poly-Plates The detailing style is only visible when it is a matter of polyplates (except for stiffeners). > Stiffeners
The detailing style is only visible when it is a matter of stiffeners.
> Others
The detailing style is only visible when it is a matter of a part which is not seized by the above filters (e.g. 3D-solids).
Page C.2 - 9
Detailing Style Group Component Groups All Component Groups The detailing style is visible everywhere where it is a matter of component groups. Otherwise, it will not be displayed. If this option is deactivated, the visibility can be limited even further to certain types. > Straight Shapes The detailing style is only visible when the main part of the group is a straight shape. > Bent Shapes
The detailing style is only visible when the main part of the group is a bent shape.
> Supports
The detailing style is only visible when the main part of the group is a straight shape and a support (longitudinal direction parallel towards the global Z-axis).
> Cross Girder
The detailing style is only visible when the main part of the group is a straight shape and a cross girder (longitudinal direction parallel towards the global X/Y-plane).
> Others
The detailing style is only visible when the main part of the group is of a part which is not seized by the above filters.
Subgroups
The detailing style is only visible when it is a matter of subgroups of groups or assemblies. In principle, these are also groups with special properties.
Assemblies
The detailing style is only visible when it is a matter of socalled assemblies.
Group Views All Views
The detailing style is visible everywhere where it is a matter of views on the model. Otherwise, it will not be displayed. If this option is deactivated, the visibility can be limited even further to certain types.
> Plan Views
The detailing style is only visible when it is a matter of the plan views from the working areas or of the global plan view respectively of the global ground-plan.
Page C.2 - 10
Detailing Style > Views
The detailing style is only visible when it is a matter of the model views from the working areas.
> Anchor Plans
The detailing style is only visible when it is a matter of the anchor plan of the model.
> Others
The detailing style is only visible when the view is a model view which is not seized by the above filters.
Connecting Gusset The detailing style is only visible when it is a matter of the gusset details from the model. Manual Details
The detailing style is only visible when it is a matter of manual details from the model. Of course, these details cannot appear in the component parts list of the DetailCenter. However, you can decide whick detailing styles shall have to be displayed for selection in the function for the manual details.
Others Style selectable
The detailing style is not submitted to a certain filtering and is visible everywhere.
Description
Here you can enter a description of the detailing style in order to explain its function in a more detailed way.
Style Class
Here you can assign the detailing style to an existing style class. It will be displayed in the selection list of the DetailCenter with a coloured icon so that you can faster identify the essential task (e.g. detailing style for single parts, for groups, etc.).
C.2.4
Page C.2 - 11
Detailing Style
2D-Display These dialog tabs offer the opportunity to specify the display type of the component parts (centerlines, drill holes, hidden edges, etc.), which line types have to be used and which special default settings have to be valid for the different detailing types.
Tab Common
Group Add Visible Edges
All visible lines are displayed according to their line type. This field should always be checked.
Invisible Edges
The invisible lines are displayed according to their line type.
2D-Bolts
The put in bolts are depicted by a bolt symbol.
> Real Bolts
The bolts are depicted as real view with nut and bolt head.
2D-Weldmint
The welding joints imported to the model are depicted as weld symbol.
2D-Elevation symbols The height indicators imported to the model are depicted.
Page C.2 - 12
Detailing Style Special Parts Special parts inserted into the model are depicted. These may be any parts (such as e.g. blocks) containing ProSteel component part caracteristics. Real Cross-Sections The shape cross-sections are depicted with their exact radii – otherwise, the simplified depiction in the form of straight lines is selected. > At Dimensioning
At dimensioning, all edges and radii of cross-section display are used. Otherwise, only the outside dimensions are depicted.
Bearing Bar Direction A symbol for the bearing bar direction is attached (which corresponds to the lengthwise direction of the grid) if it is a matter of plates having a grid. > Symbol Size
Here, you enter the size of the symbol, which is used for the direction of the plate grid.
Group Shape Shortening Shape Shortening
Shapes are “compressed” in areas without detailing and a shortening symbol is attached. Whether a shape can be shortened depends on its detailing processes and on the limits specified by you hereafter.
Symbol-Distance
The gab in the shape or the distance between the lines if a shortening symbol with two lines is used.
Min. Shape Length
Shortenings are to be attached starting at this length. You can use your page optimally by displaying the shapes as long as possible.
Min. Shortening
The shape has to be shortened by at least this value to even activate any shortening.
Max. Number
The maximum number of shortenings inserted into the shape.
Distance Edge
Shortenings cannot start at the edge or margin area but can only start this indicated distance from the edge. This prevents shortening a shape without detailing too much.
Page C.2 - 13
Detailing Style Shortening Symbol Here, you select the symbol, which has to be inserted into the shape at shortening position. Single Line – The symbol is a simple straight line. ZigZag Single – The symbol is a serrated, wave-like line. Double Line – The symbol is a double straight line with the gap set in the 'Symbol-Distance' input field. ZigZag Double - The symbol is a serrated, wave-like double line with the gap set in the 'Symbol-Distance' input field. Only Gap – There is no symbol depicted, but only a gap with the distance set in the 'Symbol-Distance' input field. Break Symbol
Here, you select the symbol, which has to be inserted at the break edge of the completely cut-off shape end. Please also refer to „Shortening Symbol‟.
Group Others Hatching Size
Here, you specify the hatching scale. This is the line distance for line hatching.
Hatching Angle
Here, you enter the angle of hatching.
Hatching Pattern
Here, you enter an AutoCAD hatching pattern to be used for cross-section hatching.
Tab Common Tab Holes
Page C.2 - 14
Detailing Style
Group Drill Hole Axes Axes View
At a view on the drill hole the axis is depicted.
> Excess Length
Here, you specify the excess length of the axis beyond the outside edges of the shape.
Axes Plan View
At a plan view on the drill hole the two axes (horizontal and vertical) are depicted. In the selection list, you can specify whether all holes, only the visible holes or the invisible holes have to be displayed or whether there has to be no display at all.
> Excess Length
Here, you specify the excess length of the axis beyond the drill hole depiction.
> Rotated by 45°
The two axes lines are rotated by 45° to prevent that they overlap with dimension lines or others.
Group Drill Hole Depiction Hides only Axes
The hidden (invisible) drill holes are depicted using a dotted line in plan view. Otherwise, only the axes are depicted if these are chosen for display. However, if you selected „Old Standard‟, the axes are always displayed.
Real Drill Holes
The holes are depicted according to their diameter as either circular holes or hidden edges. Otherwise, only the axes are displayed if these are chosen for display.
> Filled
The hole depicted is completely filled.
According to Style Template The drill holes are displayed with a depiction which can be defined freely. Thus it is possible to get your own depictions (e.g. true to no scale or symbolic), too, depending on the current hole diameter for the application of different standards and special cases. > Symbol Size
The symbol size according to the hole style template.
> Style Template
The desired hole style template for depiction. Create a hole style template in the function for hole depiction and just load it here. Use the neighboring button to get direct access to the dialog for the creation of hole style templates.
Page C.2 - 15
Detailing Style
Tab Common LineDisplay
Group Colour and Line Type 2D-Line Definition
Here, you select the source of the definition of line type depiction. It describes which line type and colour the lines of a component part have in 2D-depiction. From Detail Style – the definitions come from the settings on this page. From Configuration – the definitions come from the configuration file of ProSteel. From File – the definitions come from a separate definition file.
Colour
Here, you define which colour has to be used for the three types of component part lines (visible, invisible and center line). Use the AutoCAD-colour numbers.
Line Type
Here, you define which line type has to be used for the for the three types of component part lines (visible, invisible and center line).
On Part Layer
The line depiction is realized on the same layer name as assigned to the original component part in the 3D-model. Otherwise, it is realized on layers for visible or invisible lines.
Page C.2 - 16
Detailing Style
Dialog-Commands SELECT COLOUR Click on this button to open the AutoCAD-standard dialog for colour selection and you can select the colour number in the diagram.
Page C.2 - 17
Detailing Style
Tab Common LineDisplay CenterLine
Group General: With Center Lines
The center lines of the component parts selected on this dialog tab are displayed.
Excess Length
Here, you specify the excess length of the center line beyond the two ends of the shapes.
Group Special Shapes Special Shapes
Center lines for special shapes are depicted.
Roof-Wall Shapes
Center lines for roof-wall shapes are depicted.
Combi Shapes
Center lines for combi shapes are depicted.
Weld Shapes
Center lines for weld shapes are depicted.
Group Others Shape List
Page C.2 - 18
Select for which types of different standard shapes the center lines have to be depicted by highlighting them in the list.
Detailing Style
Tab SingleParts
Group Add Cross-Section Standard Shapes
Additional cross-sections are added to the views of standard shapes.
Special Shapes
Additional cross-sections are added to the views of special shapes.
Roof-Wall Shapes
Additional cross-sections are added to the views of roof-wallshapes.
Combi Shapes
Additional cross-sections are added to the views of combishapes.
Weld Shapes
Additional cross-sections are added to the views of weld shapes.
At End Plates
In the plan view of a base or end plate, the cross-section of the welded shape is displayed.
Position Cross-Section In the selection list, you define on which side of a partial view the cross-section of the shape has to be displayed. Left Side – The additional cross-section is displayed on the left. Right Side – The additional cross-section is displayed on the right.
Page C.2 - 19
Detailing Style
Group Others Direction Symbol
The direction symbol is displayed at main parts.
Display Origin
The zero point reference of coordinate dimensioning of the single part is displayed as reference point or at American dimensioning option as special symbol for “Running dimensions”.
> Symbol Size
Here, you enter the size of the symbol.
Page C.2 - 20
Detailing Style
Tab Groups
Group Cuts Display Sections
2D-cuts (manual or automatic at e.g. stiffeners) inserted into the main part are added as additional view to the group. Here you have to differentiate between 2D-cuts in the model and 2D-cuts in the details: 2D-cuts inserted in the model only define whether and how a detail has to be cut at detailing process.
Only manual
Only manually added cuts are displayed. Cuts automatically determined by the program are not depicted.
Show Identical 1x
Cuts having an identical display are only depicted once.
Arrange Below
The cuts are not depicted on the left and/or on the right of the main view (mostly the front view), but beneath the last views, one beside the other.
Symbol Outside
Cut arrows are displayed outside of the last dimensioning chains. Otherwise, they are fixed directly at the part even in front of the dimensioning chains.
Symbol Template
Here, you can select a template describing the display of cut labeling. These templates can be defined within the command “Insert 2D cut”.
Page C.2 - 21
Detailing Style Labeling
Here, you indicate the cut designation (without the code letter for cut) that has to be used for labeling the cut views
Cut Code
Here, you enter the code letter (or number) that has to be used to describe the first cut of a group. All other cuts of this group will be counted accordingly in increasing order.
Group Neighboring Parts Display
The neighboring parts of a group are also depicted. These are the parts where the group is connected, which however don‟t belong to this group any more.
With Position Flags The position flags of the neighboring parts are also inserted in the view. Detailing Style
The detailing style used for displaying the neighboring parts.
Search Area
The size of an imaginary box around the whole group. Everything inside of this box will be displayed as neighbouring part up to the edges of this box. You may define the box in the three input fields separately for X-, Y- and Z-direction of the group.
Group End Plates: Display
A single part detail of the end plates will be depicted with displayed connection shape on the corresponding side of the group, if end or base plates exist.
With Component Group Style The end plates are depicted with the detailing style used for the component group. Otherwise, they are always displayed with their own detailing style. View Direction
Here, you specify the view direction of the end plate detail related to the group. Inside – The shape to be connected is depicted as cut. Outside – The shape to be connected is depicted as hidden. Above – The shape to be connected is depicted as cut together with base plates and as hidden together with end plates.
Min. Distance
The distance of the end plate details towards the other views of the group.
Page C.2 - 22
Detailing Style Group Others Display Origin
The zero point reference of coordinate dimensioning of the group is displayed as reference point or at American dimensioning option as special symbol for “Running dimensions (RD)”.
> Symbol Size
Here, you can enter the size of the reference point. The RD symbol characteristics at American dimensioning option are specified in dimensioning parameters.
Show Northern Direction A mark is displayed at the group showing the alignment with regard to a global northern direction. In the global settings, the American dimensioning style has to be activated. With Part Number
The US-part number or position number as well as the quantity of pieces is shown together with the longitudinal dimension chain. However, the US-part number has to exist already, i.e. the option is not activated unless an update has been made. In the global settings, the American dimensioning style has to be activated.
Indicate Mounting Position In the case of stiffeners and web angles, it is specified whether these are situated on the front or back side of the web or on both sides of the web (in case of identical parts). To recognize identical parts, the parts have already to be equipped with a position number. Only a simple comparison is made here by means of position number and position of the part‟s center.
Page C.2 - 23
Detailing Style
Tab ConnectingGusset
Group Selection and Cut Selection with Box
All component parts situated within the indicated box are depicted. Otherwise, only the parts belonging to the main connection of the gusset are displayed.
Box Size (X,Y,Z)
Enter the size of the selection box in the input fields X, Y and Z. The distances refer to the component part coordinate system of the main shape and are measured from the center of the main connection.
Cut at Box
Here you select the distance to be used for cutting the depicted shapes. At Selection Box – The selected parts are cut off at the borders of the selection box. At Cut Box – The selected parts are cut off at the individual borders of a cut box. The result will be that e.g. the supports are depicted a little bit longer, but no other component parts of this extended area will be depicted.
Box Size (X,Y,Z)
Enter the size of the cut box in the input fields X, Y and Z. The distances refer to the component part coordinate system of the main shape and are measured from the center of the main connection.
Page C.2 - 24
Detailing Style
Group Others System Point
The system points (work points) of the involved connection shapes are depicted. These are the points of intersection between the center lines of the individual connection shapes and the main shape such as e.g. a support.
> Symbol Size
Here, you enter the symbol size.
For more detailed information about how to create a gusset detail, please refer to the chapter ‟DetailCenter/Gusset Details‟ of this manual.
Page C.2 - 25
Detailing Style
Tab Views
Group Part-Filter Shapes
Shapes are displayed in the view unless it is a matter of the types that are set separately in the filter. Normally, this option should be activated. Distinguishing between the different component parts is of course possible only if these have been generated with the associated functions as well. Otherwise, a web angle created as manually drilled angle steel would be interpreted as a normal shape.
Poly-Plates
Poly-plates are displayed in the view unless it is a matter of stiffeners or bracing plates.
Stiffeners
Stiffeners are displayed in the view.
Bracing Plates
Bracing plates (gusset plates) are displayed in the view.
Web Angle
Web angles are displayed in the view.
End Plates
End plates are displayed in the view.
Base Plates
Base Plates are displayed in the view.
Special Parts
Special parts are displayed in the view (e.g. ACIS-3D solids).
Concrete Parts
Component parts having been created with the application „ProConcrete 3D‟are displayed in the view.
Page C.2 - 26
Detailing Style Only Within
Only those parts are taken into consideration which are situated completely or at least up to their half within the work frame. Thus you can make a special selection out of the area – otherwise, all parts are shown which are situated on the level of the work frame (i.e. in the way you would see them in reality.
Base Plate at Sketch Head and base plates are displayed if the option „Sketch‟ or „System Lines‟ has been selected under display variant. Otherwise, they are always displayed. Use XRef
The parts added to the model via XREF‟s are displayed and dimensioned as well. The above mentioned display filters are also valid for these component parts. Please refer to your AutoCAD documentation where you will find a description how to work with XREF‟s.
Min. Part Size
Here, you can exclude small parts from selection by specifying the distance of the most distant and farthest removed, opposing corners. If the corner distance is smaller than the indicated value, the part will not be recorded. This setting is unimportant if the value 0 has been entered here. None of the parts are then filtered with this function.
Group Display Variant Standard View
The overview is displayed as standard 2D-depiction where all hidden edges are correctly determined.
Sketch Drawing
The construction components are only hinted at as sketch drawing. It is not absolutely necessary that this sketch drawing has to be seen from the beginning till the end of a component part. It is possible that only the center line is displayed.
> Offset Edge
Here, you specify the distance the beginning of the sketch drawing has to have from the insertion point of the shape. If you indicated a relative length smaller than 100%, this is also the beginning of the center line.
> Rel. Length
Here, you specify the length of the sketch drawing as relative value related to the shape length. The rest will only be displayed as center line.
Page C.2 - 27
Detailing Style As Objects
These component parts are displayed as intelligent 2Dobjects. At this method, however, the hidden edges are only displayed correctly in relation to the corresponding part. Hidden edges, which are created due to other components, cannot be calculated. This method is suitable if you want to attach position flags later. By means of shape characteristics, it is also possible to indicate individual depictions per component part if an exact display of hidden edges is not so important e.g. in overviews for discussions.
System Lines
Only the center lines of shapes are displayed as static system, plates and similar component parts are not displayed.
Anchor Plan
An anchor plan with alternatively two different scales is generated. Display of the base plates can thus be depicted in an enlarged display.
> With Supports
In addition to the anchor details, the supports are also displayed as cross-section.
> Supports As Object The supports in the anchor plan are displayed as intelligent 2D-Objects. > Details S1
Here, you enter the scale of base plate details in the anchor plan. However, an anchor plan can only be generated if you have linked the view “Anchor Plan” in the component parts list with this style setting.
At original Position
The generated view is not put into x/y plane (z=0), but it is aligned and placed in the same way like in the model. This permits the insertion as overlapping in an already existing 3D-model (e.g. for facilities construction). The option is not available when the view output is scaled.
Group Visual Depth View Frame
The visual depths assigned to the work frames are used for views.
Dialog Default
The visual depths specified in this dialog are used for views.
> Front/Back
Enter the visual depths Front and Back, which have to be used for the views.
Page C.2 - 28
Detailing Style Max. Distance
Enter the maximum distance another work frame is allowed to be removed from the current view to be interpreted there as construction axis for axis display and dimensioning.
Displacement
Enter a displacement the plane used for the view has to have from the actual work frame (in view direction). If the view plane doesn‟t have to be exactly in the work frame plane, this will save you an additional view.
Dialog-Commands FILTER By clicking on this button, you can define a filter of your own from other parts properties apart from the previously defined filters of the group Part Filter. Then, a dialog opens for entering the filter condition.
Description File
The shape description can be used as filter criterion. The terms available for selection are displayed in the list.
Part Family
The part family can be used as filter criterion. The part families available for selection are displayed in the list.
Include
The part is displayed if it corresponds to another type in the second list (logical OR).
Exclude
The part is not displayed if it corresponds to another type in the second list (neg. OR). When you click on this button, the selected entry of the first list will be adopted in the second list.
Page C.2 - 29
Detailing Style When you click on this button, the selected entry in the second list will be removed again from this list.
Construction Axes in Overviews The figure below shows the connections between current view and construction axes. In the current view (gray) of work area 1 the construction axes A, B and C would be displayed. The corresponding work frames contain the information about axis description and text display. As, however, the construction axis C is situated outside the displayed construction, it could be hidden with the “Axes only within” option. The axes of the small work area 2 would only be displayed if the smallest distance of the corresponding relevant work frame was smaller than the preset value of „Max. Distance‟ for the visual depth. If different values have been indicated for the left and right axis description, the description is used which is next to the current view.
Page C.2 - 30
Detailing Style
Displacement of Reference Plane The reference plane of the depiction can be displaced towards the corresponding work frame by an additional value. Thus you can get a more suitable display especially in case of intersections without having to generate a separate view frame. In the example below, the intersection view has to be generated at the constructional axis 2. As all shapes are situated centrally, the result would normally be a depiction like (1), because the shapes of the web are cut, too. IWhen you enter a small value for displacement, the intersection plan can be situated outside of the web, and only the roof of the building gets a visible shading.
Connection Details and Cranked Views or Cuts In addition to standard views on work areas, ProSteel can also generate cranked views and detail point overviews (connection details). The kind of view is determined by the kind of work area defining the view. Typical connection details can alternatively be generated automatically if connections with named logical links are available at the corresponding position. Please also refer to Connecting Gusset or Gusset Details. If a depth has been indicated for the work area, it is a matter of detail point overview allowing you to display several views on this area simultaneously (front view, plan view, etc.). Detailing is effected like that of a standard overview, i.e. all parts are exported as AutoCAD lines and dimensioned according to the settings for overviews. If a cranked cut has been inserted, you can display a cut though the model which is situated in different levels. You can hide undesired sections or refrain from an additional view. Depending on the position of the cutting line, the parts are cut or displayed as view.
Page C.2 - 31
Detailing Style The neighboring figure shows you the different variants: The standard front view shows the supports 1, 2 and 3 as view unless the visual depth of the work area reaches up to support 4. The cranked view only shows the supports 1 and 4 in the area of the indicated visual depth. If there were parts on the thick, black cutting line, they would be displayed as cut.
The detail point overview shows the construction 5 in the selected views (here front view and view from the right), the cutting depth results from the rd corresponding 3 dimension of the cube. The result of detailing process for the different kinds of overviews is displayed in the following figure. The display of dimensions, position flags, etc. depends on the selected detailing style. Example (A) shows the standard view, example (B) the cranked view and example (C) a detail point overview consisting here of three partial views.
Page C.2 - 32
Detailing Style
C.2.5 Dimensioning Here, you can indicate all of the settings for the dimensioning of the components. Since this is a rather complex area, the settings are distributed among several subordinate dialogs within this main group. In addition, you will find completing dialog boxes and commands which can be opened directly from the different pages or via the context menu of the right mouse key. Dimensioning settings occupy an important place in the detailing style and contribute a great deal to the quality of workshop drawings. Therefore it is important that you have a closer look to their way of working. The following chapters first will give you a survey on the functioning and on the terms before the different options will be described in detail. Common or similar things will only be described once due to a better clarity.
Extended Conception It is for the first time that a new conception for automatic dimensioning was introduced with version 17.1. The distribution of ProSteel all over the world led to considerably increasing demands on a flexibly adaptable dimensioning. The idea of previous versions was to cover a wide range of variants with a few fixed default settings by intelligent automatic mechanisms. An increasing number of “exception-buttons”, however, meant increasing confusion. This is the reason why the new conception now permits precise default settings for the different sections so that you can better adapt your detailing style to the construction and to necessary drawing standards. With version 18.0, this new conception has once again been modified to facilitate the proceeding of settings, quality remaining unchanged. On the other hand, this had the result that many times the amount of new dimensioning possibilities has been created. At the same time, the program has been adapted to the extended group structure of ProSteel. At first glance, the great number of parameters and possibilities will perhaps frighten you. However, when you take a closer look, you will fast find out that the default settings for dimensioning follow a standardized logic and that therefore things are logically repeated. The example on the following page shows dimensioning of a complexe component part group as it now is possible with the new detailed setting structure automatically and without further follow-up treatment.
Page C.2 - 33
Detailing Style Example for a complex component group dimensioning
Optimum Prerequisites in 3D-Model The prerequisites for practise-oriented dimensioning are already generated by appropriate steps during 3D-modelling. The references between the different component parts are generated by means of logical links. However, when you have deleted them afterwards, it is not possible any more to determine all relations via detailing and dimensioning can less get its bearings. Appropriate insertion or reference lines which can still be modified later generate the prerequisites for the desired measuring references. Thus, when you want to have a correct dimensioning of openings, disturbing edges, etc., just set the corresponding reference edges already in the model. Of course the right modelling function, too decides on the later result of dimensioning. When you want e.g. to have recognized end and base plates as such, you have to create them with the corresponding 3D-function, too.
Page C.2 - 34
Detailing Style
Dimensioning Structure ProSteel dimensioning is divided into several main groups for single parts, component part groups, model-views, etc. which can be set independently of each other. Within each main group, there are still other subordinate groups the parameters of which are also independent of each other. Trans-sectoral settings facilitate the common use and reduce the number of necessary parameters – e. g. dimensioning of the main parts of component part groups are controlled via single parts setting.
Page C.2 - 35
Detailing Style However, this structuring is only the major selection of parameters. Each subordinate group itself again consists of an inner structure with independent default settings for the different detailing processes (of single parts) or for the different component parts (of component part groups or model-views). Each single component part or detailing type permits individual default settings for different dimensioning directions and component part views. However, a considerable repetition degree is reached here. Inner Structure Here, you see the inner structure of a subordinate group as it exists for dimensioning of add-on pieces in component part groups.This is the structure with the most variants as the dimensioning of a component part group has to take into consideration a lot of different conditions. In the following, we will therefore describe the essential matters with the help of the settings for dimensioning of a component part group. As you can see it is possible to preset a different dimensioning point for shapes in bent component part groups (radial) compared with the standard component part groups (linear). For stiffeners things may again be different.
Page C.2 - 36
Detailing Style
Dimensioning Groups You can generate any dimensioning groups with identical settings you like by using the component parts of the inner structures. The advantage is that identical settings for different component parts can fast be made or modified. The number of parameters still allows a clear view. At the same time, an essential limit of previous versions is superseded: synonymous component parts which were differently modelled in the 3D-model can be dimensioned together by means of one setting. Let us take stiffeners in a shape here as an example which have once be manually created as polyplates and once by using the stiffener function. Nesting Complex group structures such as e.g. an assembly can consist of several component part groups and subgroups. Nesting in dimensioning (individual dimensioning) permits complete dimensioning even of subordinate groups within a parent group. Additional detail drawings can thus be omitted. As there is only one set of parameters per hierarchy type available for subordinate structures, individual structures can be excluded or limited in dimensioning via filter. Typical applications of nested dimensioning are for example the dimensioning of the detailings of add-on parts in groups or the dimensioning of the position of component part add-on parts in assemblies.
Besides the add-on dimensions (1) of polyplates, this detail of a component part group still has an individual dimensioning like a single part dimensioning (2).
Page C.2 - 37
Detailing Style
Dimensioning Groups All essential parameter settings are made per partial sector via freely definable dimensioning groups with any assignment of component part types, i.e. you can define if need be how complex the structure of dimensioning has to be. Compared with previous versions, this proceeding is considerably more practise-oriented because first you decide (a) how you want to dimension and then (b) which component parts have to be dimensioned in this way. In the easiest case of component part group dimensioning only the settings for the overall dimension and the settings of a common dimensioning group for all add-on parts – independent of their type – is available. However, if a more complex dimensioning is required, you can add further dimensioning groups or special dimensions as you like and thus specialise the default settings even further. Define Guidelines for Dimensioning In principle, a dimensioning group complies with a clear guideline for the component parts to be dimensioned. By means of the parameter set of the group you define how the component parts have to be dimensioned. This parameter set is divided into different rules for straight and bent dimensioning directions, favourable and unfavourable views, etc. By means of the assigned component parts you define which component parts have to be dimensioned with these rules. This can either be a very general selection (e.g. all shapes) or a very special selection (e.g. sheet metal plates bigger than 200x200 mm). Dimensioning is worked off according to the principle of exception: All component parts or detailings for which no own rule has been defined, are treated together with the settings of the so-called standard group. This group exists in any partial sector of dimensioning and permits a fast selection at identical rules. If certain component parts don‟t have to be dimensioned, they have to be assigned to a group as well, because „No dimensioning‟ is a kind of rule, too. For example, you could define the different rules for all component parts having to be dimensioned and then set the standard group to „No dimensioning‟. Special Component Part Groups, Detailings and Special Dimensions Each component part can be assigned to a standard dimensioning group. However, apart from their common properties shapes and sheet metal plates also have features which don‟t mean anything to the other of both types.This is the reason why in a standard group only the common properties of dimensioning are available.
Page C.2 - 38
Detailing Style If you want to make use of the extended properties, you can e.g. insert a shape dimensioning group to which exclusively shapes can be assigned. However, this group offers many more setting possibilities – especially just for shapes. The detailings of single parts (drill holes etc.) as well as certain other dimensions are dimensioning rules to which nothing else can be assigned. However, here it logically is a matter of dimensioning groups as well which can be added if need be. These very often are very special groups and can only exist once per dimensioning area. The overall dimension of a detail is also a special dimension. As it is often required, it is a kind of standard dimension which always exists. Multiple Dimensioning Normally, a component part is dimensioned only once, e.g. drill hole dimensioning. This option is already known from previous versions. The flexible structure now also permits multiple dimensioning of component parts. Thus it is possible to (a) dimension all shapes via the drill holes as you did up to now and (b) to dimension certain shapes additionally via the center axes by using completely independent default settings. Multiple dimensioning of a straight shape. The outside girders are equipped with an additional dimensioning chain via the center axes..
Multiple dimensioning of a bent shape. The connection plates are equipped with an additional dimensioning chain with the measures of angle towards the edge of the component part.
Page C.2 - 39
Detailing Style The following example of an assignment shows the structure of a more complex dimensioning. Three additional dimensioning groups with independent rules are defined and an additional special dimension is fixed. default setting for all shape types (standard group, added as an option) Additional dimensioning for U- and C-shapes for completion, i.e. multiple dimensioning (special shape group, added as an option)
default setting for all sheet metal plates and stiffeners (standard group, added as an option)
default setting for all other component parts (standard group, always existing) system dimensions of the construction (special dimension, added as an option) overall dimension of the construction (standard group, always existing)
As the standard group has to process all other component part types, this in principle is a standard dimensioning group.
Copy Settings Most of the dimensioning groups can be copied within a partial sector. At first, no component parts are assigned to this copy, even if there are already some assignments in the original group. Copies have always the same type, i.e. if the original group is a shape group, the copy again is a shape group, too. Then, you can rename the copy and assign the desired component parts to it. Special dimensions and single part detailings can exist only once and therefore cannot be copied.
Page C.2 - 40
Detailing Style Standard Default Settings When a new dimensioning group is created, it is equipped with standard default settings which in most cases produce proper results. You can always reset a group into this standard state if it appears to be “hopelessly altered”. In addition, it is also possible to create a complete standard default setting for each partial sector of dimensioning (e.g. dimensioning of add-on parts in groups). Apart from the settings, this standard default setting also contains an assignment of component parts. The standard default setting has been optimized for typical support/girder constructions and is a good starting-point for user-defined adaptations. The standard default settings were defined by the manufacturer and cannot be modified in order to find a uniform starting position at each user and at any time. Kindly make use of the standard loading functions of the detailing style to define your own standards. Conversion of Former Drawings Models which were created with version 17.1 or 17.2 had a fixed default setting of independent parameter records. When you open these models with version 18.0, a separate dimensioning group will be created for each of these parameter records so that the behaviour will be analogous to the previous version in case of parameter modifications. You can of course remove groups which are not required or modify the assignment of component parts afterwards. If desired, you can thus sum up identical default settings to a common group.
Page C.2 - 41
Detailing Style
Dimensioning Areas ProSteel differentiates different dimensioning areas which you can imagine as independent local areas. The respective alignment is determined by the involved component parts and influences the indications of place and direction in the dialogs. As an option, there is also a forced horizontal or vertical alignment independent of the position for each part dimensioning in a dimensioning area.
Local Areas in Component Part Groups Within a view – that means e.g. the front view – these areas can exist several times except for the global area.
Global Area (1) These are all dimensioning chains which are situated outside the component part group and which describe the position of the subparts with regard to the main part. The horizontal alignment is always determined by the main part of the group and the smallest extent corresponds to a rectangular which you could draw around all component parts in direction of the main part. Since the inner measures which are perpendicular to it are always fixed at the corresponding add-on piece (inner measures), they are assigned to the local area if distances have been specified. The checked example here shows the area below the group.
Page C.2 - 42
Detailing Style Local Area (2a and Connection Area (2b) These are all dimensioning chains which are situated inside the component part group and which describe the position of the subparts with regard to their direct reference part. In case of dimensioning of subparts with local reference (2a), the horizontal alignment is determined by the corresponding reference part and the smallest extent corresponds to a rectangular around this reference part. In case of aligned dimensioning of subparts (2b), the horizontal alignment is determined by the corresponding add-on piece and the smallest extent corresponds to a rectangular around this add-on piece. . Here, you see a comparison of the three possible variants by which the butt strap can be dimensioned as an add-on piece of a component part group. The measures according to variant (1) and (2a) are alternatively possible; the measures according to variant (2b) can be attached in addition. Individual Dimensioning (3) These are all dimensioning chains which are situated inside the component part group and which describe the production measures of individual subparts. The horizontal alignment is determined by the corresponding subpart and the smallest extent corresponds to a rectangular around this subpart. Additional Views (4) These are all dimensioning chains which are situated outside the component part group in possible additional views so that here it is strictly speaking a matter of another global area. These additional views are for example the turned down endplates (here production measures) or cuts and details (here dimensioning of position). The horizontal alignment is determined by the alignment of the view and the smallest extent corresponds to a rectangular which you could draw around all component parts in this view direction. The notion „inside‟ here refers to a typical setting of measuring distances. At corresponding default settings, these „inside‟ dimensioning chains can actually be situated outside of the group as well. If the main part of a component part group or the local reference parts are bent shapes, the dimensioning direction or the surrounding rectangular will follow this bend.
Page C.2 - 43
Detailing Style Individual Areas in Complex Group Structures When the corresponding detail is a complex group structure (such as e.g. an assembly), individual dimensioning is not exclusively limited to production measures of single parts. Within an assembly, the contained component part groups can be dimensioned individually as well as it is the case with standard component part groups (see „Nested Dimensioning‟). In this case, several independent types of individual areas exist which can be managed separately. Each of these areas would correspond to the global area of the corresponding substructure if you displayed them as separate detail.
Assignment It depends on the kind of 3D-modelling whether a component part can be reliably assigned to a local area. Most of the ProSteel functions create logical links between the involved component parts. By means of these links it is possible to determine which component part has been connected to another component part and by means of which connecting component parts this connection was realized (e.g. web angle). Thus, the assignment connected part and reference part is clearly defined. When you cut however for example two shapes by means of a cutting line so that they match with each other, no logical link will be created there. In this case, you can force a relation of the component parts by the manual link (PS_MANUAL_LINK). The manual link should also be used when the automatically created link of a connection can - for whatever reasons - not be evaluated for determining the relations. When the assignment cannot be determined and you selected a local reference of the component part, the component parts in question will be assigned to the global area.
Page C.2 - 44
Detailing Style Local Areas in Overviews Different local dimensioning areas can be determined for overviews, too. They are however not realized via component part relations but via a geometrical analysis of shape dimensions. The shapes are classified according to length and position and then possible segments are built after an evaluation. Finally, these segments are brought together to local areas within certain tolerance ranges. You can preset the parameters for area analysis in detail; we have, however, to admit that this requires a high degree of experience.
The above figure shows the plan view on a platform construction as it is automatically dimensioned by using several local areas. You can make separate settings for horizontal and vertical shapes as well as for shapes visible in cross-section – each one in longitudinal and transversal direction. In addition, there is another global out-lying area having its own default settings. Only those shapes are dimensioned in common dimensioning chains which are situated completely or partly in one of these areas, if these should also be assigned to the inner area.
Page C.2 - 45
Detailing Style The global outer/inner area is determined by means of a simple snap area without special analysis algorithm. Outer Area (1) The global outer area is a uniform area which is seen from the overall dimensions of the view to the inside. The dimensioning chains are always situated outside of the view. Inner Area (2) The remaining area is the global inner area. Depending on the default settings, the dimensioning chains are always situated inside or outside of the view or the shapes are completely excluded from dimensioning. Alternatively, you can have determined local areas by means of an analysis algorithm and dimension them instead of the global inner area (but in addition to the global outer area). Local Area (1) Here, you see a local area with vertical alignment containing the complete platform part on the left side. Altogether, the example contains three areas (1x horizontal, 2x vertical). Subdivision of Areas (2) (3) Each local area can again be divided further. Then, each segment (2) resp. (3) contains its own dimensioning chain.
The direction of the local area (horizontal dimensioning direction) is determined by the proportions of sides. The limit for a direction change to main direction is at 2/3 of the long side. If there is, however, a further subdivision of the area in segments, direction change will not be effected any more.
Page C.2 - 46
Detailing Style
Indications of Place and Direction Indications of place such as beginning, end, above, left, etc. always depend on the alignment of the component part or area. In the neighboring figure, the position of the top (horizontal, long side) and the position of the left side (vertical, short side) of a component part are displayed, dependent on its insertion direction. In addition, the figure also shows that the direction is not inevitably running from starting point to endpoint of the insertion (starting point here is checked by the black point). The standard reference point of the dimensioning (bottom left) is indicated by a black triangle. When it is a matter of local dimensioning areas of connected shapes, the standard starting point is always the end of the shape which is situated nearer to the corresponding reference part. So to speak, this reference part is the “higher ranking” part with regard to the main part. However, all indications of place continue to follow the logic described above. The decision whether a component part now is situated „above‟ or „below‟ another component part, depends on the direction of the selected reference part.
Page C.2 - 47
Detailing Style The example on the previous page shows a component part group with the main part (1) and several add-on shapes (2) and (3), which for their part are containing stiffeners (4). A local dimensioning reference with „Component Part Start‟ as refererence point was selected for dimensioning the stiffeners. As you can see, dimensioning is done along the component parts containing the stiffeners and each dimensioning chain starts near the reference part. In this example, the component part (2) is situated above the main part (1) and the component part (3) is situated below component part (2). Position of Dimensioning Chains You can either by force preset the position of the dimensioning chains within an area or you make select them automatically. Component parts can be dimensioned on the side on which – with regard to their reference part – they are situated. In addition, a favourable side is defined, depending on the position, as it is displayed in the following figure:
Dimensioning chains which are situated close together can be summed up according to rules which have to be defined. Thus, a clear drawing will be possible and collisions of dimensions will be avoided right from the beginning.
Page C.2 - 48
Detailing Style
Reference Axis of the Shape In the shape properties, you can assign so-called reference points or axes to a shape, which first are identical with the insertion axis of the component part after insertion. This allows you to force dimensioning on a pre-defined reference to relate e.g. all important hole dimensions symmetrically to the center axis or to “Upper Edge Steel” for plateform girders. In overviews, you will also get the most important dimensions of the construction directly by means of these reference points. Since these reference points can be modified later, you can for example insert a shape on its center line in the grid, dimensioning, however, can nevertheless be related to the upper edge of the shape. Reference Axis (1) The insertion axis of the shape or an explicitely assigned reference axis in the 3D model (A) Reference Point (2) Derived target point of dimensioning in the 2Dplans (B)
System Points of Construction The system points here are the theoretical intersection points between the center axes of two connected shapes. A logical link has to exist between these component parts, which is the case in most construction situations (such a link is for example also created by an intersection at welded-in diagonals of a truss). When a logical link doesn‟t exist, you can define dependence later via “manual link” (please also refer to Dimensioning Areas/Assignment).
Page C.2 - 49
Detailing Style
Primary and Secondary View Settings permit separate defaults for primary and secondary views of subparts. This allows you e.g. to stop the dimensioning of shapes in cross-section position or to dimension plates by means of the contained drill holes or alternatively by the plate thickness.
Primary View (1) At shapes – except for flats – this is the view showing the component part in its longitudinal direction. At plates or flat steel shapes, on the contrary, it is the view, showing the component part in plan view. Secondary View (2) At shapes – except for flats – this is the view showing the component part in its cross-section. At plates or flat steel shapes, on the contrary, it is the view, which normally shows the thickness. Please don‟t forget that the differentiation is made via the coordinate system of the component parts. If it differs – for whatever a reason – from standard, you will get different results with regard to quality.
Page C.2 - 50
Detailing Style
Linear and Radial Dimensioning Chains When the reference part is a bent shape, the dimensioning points can be dimensioned with radial dimensioning chains along the arc direction. You can choose between circular lengths, angular deviations or both values. Measured circular lengths are always related to the center axis of the reference shape; as an option, it is also possible to indicate the reference radius in all combinations.
Sometimes a mixed dimensioning, i.e. a combination of linear and bent dimensioning chains is possible at the same time (as displayed in the above example) which you can gather from the following table. Dimensioning Variant
Linear Measures
Radial Measures
Detailing in single parts
Yes
Yes
Single part measures of main parts in comp. part groups
Yes
Yes
Single part measures of subparts in comp. part groups
depending on type
depending on type
Add-on measures of subparts with global dimension reference
Yes
Yes
Add-on measures of subparts with local dimension reference
depending on type
depending on type
If simultaneous dimensioning is not possible, only the preset settings will be used for the type in question; selection depends on the current reference shape. Thus it is possible to use always the outer edges of subparts in case of straight reference parts and to indicate only the angles in case of bent shapes together with local dimension references.
Page C.2 - 51
Detailing Style
Reference Points of Dimensioning In principle, each dimensioning chain is created by fitting together individual dimensions which start in a selected reference point and end in the measuring point in question. In case of overlapping, the line segments are divided accordingly to form a continuous dimensioning chain. Reference Point (Starting Point) In most of the cases, the starting point of a dimensioning chain is the beginning of the component part; at groups, this often is the beginning of the main part (resp. of the local reference part in case of local references). Reference Points of Dimensioning Chains Beginning Ref. Part The dimension begins in the starting point of the reference part. Beginning Group
The dimension begins in the starting point of the group.
Edge Ref. Part
The dimension begins in the edge point of the reference part (starting or end point) which is situated closer to the component part to be dimensioned.
Edge Group
The dimension begins in the edge point of the group (starting or end point) which is situated closer to the component part to be dimensioned.
Center Ref. Part
The dimension begins in the center of the reference part.
Reference Point
The dimension begins in the first reference point of the reference part. Often, this is also the projected point of the insertion or reference axis of the component part.
Edge Ref. Point
If two reference points exist, the dimension begins in the reference point which is situated closer to the component part to be dimensioned. If only one reference point exists, this corresponds to the default setting „Reference Point‟.
Connecting Shape
The dimension begins in the point of intersection of the center axes of the reference part and of the connecting shape belonging to the component part to be dimensioned.
The example on the following page shows some important reference points of dimensioning chains. Web angle dimensioning could be made on the starting point of the group (1) or on the starting point of the main part (2). Dimensioning on the edge of the reference part would dimension the two web
Page C.2 - 52
Detailing Style angles on the left on point (2) and the web angles on the right on point (3) – in case of edge group, this would be the points (1) and (4). In the present example, however, the variant connecting shape was selected and thus you obtain the two dimensioning chains (A) as result. Dimensioning chain (B) results from the fact that, in addition, the reference points are dimensioned, too.
Dimension Point (Target Point) The target point of dimensioning is determined by the component part to be dimensioned or by the detailing (e.g. drill hole). Depending on the kind of component part or detailing, you often have a great number of different options for selection. Most of the options are self-explanatory so that we will only describe some common features here. For more detailed information, please refer to the short descriptions of the different sections. The importance of the component part‟s reference edges depends on the dimensioning direction of the dimensioning chain (see also: Indications of Place and Direction). From top to bottom, the example shows the dimensioning chains reaching from the beginning of the component part to the reference edges front edge, rear edge, outer edge, inner edge.
Page C.2 - 53
Detailing Style Here, too the center of the reference part in question is the dividing line for the options „inner edge‟ and „outer edge‟. To allow fast and practical dimensioning of different shapes, an automatic selection of dimension points is available (depending on the component part) which is sufficient for most cases. Here, you see the defaults for the different shape types, positions of component parts and directions of dimensioning chains:
Apart from dimensioning on the insertion-reference point, on possibly existing drill holes or even on combinations of both, you can select some special forms as target point. The example shows the dimension point contact area for the dimensions in longitudinal direction. The edge which is turned to the reference or connecting shape will be dimensioned.
Additional Dimensions You can add different additional dimensions to each dimensioning chain. These are added later to obtain „closed“ dimensioning chains. The additional dimensions permit uniform dimensioning running; on the other hand the dimensioning reference can be made clearer, you can eliminate insignificant remaining dimensions and thus reduce the number, when you don‟t use them.
Page C.2 - 54
Detailing Style
American Dimensioning When you selected American Style as general default setting for dimensioning, you obtain additional labels and dimensions as they are common in the USA. At the moment, only a limited configuration of these additions is possible. They depend on the importance of the component parts in the model. Together with the generally available settings, you have thus the possibility to create drawings according to these standards, too.
Connecting Condition (1) You are informed about the used shapes and hole distances for web angle connections. However, this is only the case, when the web angles belong to the component part group. Control Measures (2) (3) At girders, the residual measures related to the system points of supports are indicated as negative values (2) and the distance between the system points (3). When it is a matter of supports, only the height level will be indicated. Information about Main Part (4) Data concerning shape and length of the main part are added to the dimensioning chain containing the overall length of the component part group. Rebound (5) The distance between the main part and the overall measure of the component part group is indicated as individual dimension. Reference Point (6) The origin of the group for coordinate measures is indicated by the symbol „RD‟ and reference arrow instead of by a simple point.
Page C.2 - 55
Detailing Style
Dimensioning of Steel and Concrete ProSteel permits dimensioning of component parts made of concrete in overviews even if the application „ProConcrete 3D‟ is not available. This enables e. g. the design engineer to put appropriate overview plans at the disposal of customer or planner. If this additional option is not necessary or if separate plans have to be made, the corresponding group can be completely deactivated without having to deactivate the corresponding component parts separately. In addition, there are less component parts in the selection lists, a contribution to a better clarity. Here, you see an example for dimensioning a plan view:
Page C.2 - 56
Detailing Style
Dialog Structure of Dimensioning As already mentioned in the introduction, dimensioning clearly is the most substantial area within a detailing style. There, you can make independent settings of different detail types or nested dimensioning structures in a great number of part areas so that reasonably set parameters can be used in several detailing styles at the same time. When you work with the preview of the DetailCenter while making the setting, it may be helpful to use the „intelligent‟ arrangement of parameters. Depending on the selection, the number of displayed parameters is reduced and sorted. See also chapter DetailCenter/Global Settings. Menu Structure By selecting a dialog tab in a part area (1), you frequently come to the settings for dimensioning chains. Here, you find another list or tree structure (2) where you can create or process the dimensioning groups. Each dimensioning group controls one or several dimensioning chains in the actual drawing. The essential commands for the management of dimensioning groups, assignment of component parts and some additional functions are found in the context menu of the right mouse key (3), depending on the selection.
On the following pages, you will find a detailed description of the different part areas, their settings and additional functions.
Page C.2 - 57
Detailing Style Structure of Part Areas The following survey shows all independent part areas of dimensioning in standard dialog display. When you selected the „intelligent‟ arrangement of parameters, some of these areas are hidden or they are situated on another position of the tree structure. However, it is always exactly the same data record. General default settings which are valid for all areas (e.g. distance of one dimensioning chain to the other, dimensioning styles, dimensioning of drill holes etc.)
Dimensioning of single parts details, individual dimensioning of the main parts in groups Dimensioning of group and subgroup details, individual dimensioning of groups and subgroups and single parts in assemblies, individual dimensioning of subgroups in groups; individual dimensioning of add-on parts in groups Dimensioning of assembly details Dimensioning of connection details Dimensioning of overviews and anchor plans
The arrangement corresponds to the hierarchic structure of the part area. By selecting an entry, you directly reach the parent or subordinate dialog tabs of the corresponding part area. As e.g. the entry “Cut” is situated below the entry “Reference Points” in the part area “Group”, the dimensioning chains for intersections in groups are set here.
Page C.2 - 58
Detailing Style
Working with Dimensioning Groups Dimensioning groups are exclusively managed via separate commands in the context mensus and their subordinate menus on the different dialog tabs. You can add user-defined dimensioning groups; assign certain component parts to them depending on their type and delete, copy, etc. existing groups. Add Component Part Groups Select the entry Dimensioning Groups / Add in the context menu to add a standard dimensioning group to the selection tree at once. You can add any component part type to this group. However, not all setting parameters for dimensioning chains are available here. Use the command Dimensioning Groups / Rename to enter a suitable name for the new group afterwards. On the other hand, when you select the command Dimensioning Groups / Add Component Part Group, you can determine the group type as well as some further information in an additional dialog. Thus, the group is specialised in certain component part types with more setting parameters.
Group Dimensioning Group Type Group
Here you select the type of dimensioning group. General Group – for each component part type Group Shapes – for straight and bent shapes Group Polyplates – for all plate types and stiffeners Group Connecting Part – for end plates, web angles, etc. Group Subgroups – for special subgroups
Group Name
the name of the group in the selection tree
Page C.2 - 59
Detailing Style Group Labelling Type Labelling
Here you select the type of labelling for the dimensioning chain. You can choose between None, Automatic, Group Name and User-defined Default.
Selection Direction
Here you indicate which dimensioning chains have to be equipped with a labelling.
Labelling Text
Here you enter a suitable labelling text if you selected the option „User-defined Default‟.
For more detailed information about labelling, please refer to the section „Labelling of Dimensioning Chains‟ in this chapter. You can add or copy any number of component part groups and assign component parts to them. If need be, it is thus possible to build very complex dimensioning structures.
Add Special Dimensions and Detailings Select the entry Dimensioning Groups / Add Special Dimensions or Dimensioning Groups / Add Detailing in the context menu to add special dimensions and, at single parts, the detailings, too. The selection dialog already described under Component Part Groups appears where you can select the corresponding special dimension or detailing. The offered selection depends on the part area of dimensioning. You can add special groups only once and they cannot be copied. Already inserted groups therefore are not displayed any more for selection.
Copy, Rename and Delete In order to do this, you first have to select the desired group in the tree structure and then call the context menu. When you copy a component part group, a new group of the same type will be created and all parameter settings will be adopted (possibly existing assignments of component parts will however not be copied). Select the entry Dimensioning Groups / Copy. Then, you can rename the copy and assign the component parts. Rename the group using the entry Dimensioning Groups / Rename. Enter the new name directly in the tree structure. Delete the group using the entry Dimensioning Groups / Delete. In case of component part groups, it may be that the component parts once registered by this group will be processed by other groups.
Page C.2 - 60
Detailing Style Assign Component Parts Depending on the type, certain component parts can be assigned to any standard dimensioning group or to the special component part groups. Select the desired group and then click the entry Add Component Parts in the context menu. The following dialog opens:
The content of the selection lists depends on the type of dimensioning group, on the settings and on the component parts already assigned to. Group Selection Lists Upper List
Here you select the principle component part type (main type) such as shapes, plates, etc. you want to add.
Subtypes
Here you select a subtype with which you can limit the selection of the upper list. However, subtypes are not available for all component part types. Thus you can limit an assignment e.g. only to all U-shapes. Select the entry „All Shape Types‟ if you don‟t want to limit the assignment.
Group Size Area Length, Width,...
Enter an area with which you limit the selection in the fields From and To. If you enter the value 0 in both fields, this size will not be taken into consideration.
Page C.2 - 61
Detailing Style Group Component Part Description Class
Here you enter the component part description (or a part of it together with wildcards) with which you limit the selection. In the 3D-model you can add a description to any component part which you can use for your own classification here. Thus, you are independent of the built-in types, but you can make use of both in combination.
Name
Here you enter a name (or a part of it together with wildcards) with which you limit the selection.
Group Others Only New Parts
If this field has been checked, already added component parts are not displayed any more, even if they are situated in other dimensioning groups. Comparison is only made via main type so that the complete type is hidden even if there had been a limitation before. Thus, you can see which types have not yet been seized by dimensioning. In this case, multiple assignments are not possible (any more).
Multiple Assignments If this field has been checked, component parts or areas of component parts can be added several times unless it is a matter of the same dimensioning group. For more detailed information about multiple assignments and wildcards, please refer to section ‚Automatic Assignment Check‟ in this chapter.
Click on this button to add your defaults as new assignment or to modify the selected assignment accordingly.
Page C.2 - 62
Detailing Style
The neighboring example shows the dimensioning of a construction having approximately identical shape types and shape lengths. With the help of component part description, you can nevertheless automatically generate a dimensioning which shows the connection of the component parts with each other in a reasonable way. Modify and Delete Assignment First select the desired assignment in the tree structure and then call the context menu. Modify the assignment using the entry Modify Part. Then, the above-described dialog for assignments opens where the current setting is displayed. Now, you can modify the data and make new assignments. Delete the assignment using the entry Delete Parts. It may be that the component part or the part area will be processed by other groups.
Page C.2 - 63
Detailing Style Automatic Assignment Check When component parts are assigned, the program automatically checks whether the type, name or size areas overlap and therefore the result would be an indefinite assignment. If this is the case, the new assignment will not be accepted and an error message will be displayed. The check is made at each insertion or modification of assignments and depends on the option „Multiple Assignments‟. If this option has been activated, the check is only made in the current dimensioning group – the assignment can be repeated in another group of the part area. If multiple assignments option has been deactivated, the program checks the complete part area by means of all groups that a component part will be registered only once. The following diagram shows some examples of desired assignments: Existing Assignment
Additional New Assignment
Shapes
Shapes
not possible
Shapes
Shapes, only U-Shapes
not possible
Shapes, only L-Shapes
Shapes, only U-Shapes
OK
Shapes, up to 2000 mm length
Shapes, from 1500 to 2500 mm length
not possible
Shapes, up to 2000 mm length
Shapes, from 100 mm height onward
not possible
Shapes, up to 2000 mm length
Endplates,from 100 mm height onward OK
Shapes, Name=HEA*
Shapes, Name=HEB*
OK
Shapes, Name=HE*
Shapes, Name=HEB*
not possible
The symbol „?‟ can be used as wildcard for any single character in the name or in the component part description. The symbol „*‟ can be used for any sequence of characters. It is true that you can use the symbols as you like, but a correct check with regard to overlapping only takes place for the symbol „*‟ at the beginning and/or end.
Page C.2 - 64
Detailing Style Labelling of Dimensioning Chains Many dimensioning chains can be equipped with a labelling text indicating which component parts, detailings or situations are dimensioned. This text may be controled individually per group via dimensioning groups if a labelling is generally provided there by the program and it has been switched on globally (see dialog tab General Info). In the global area of the usual dimensioning of add-on parts or detailing most of the dimensioning chains can be equipped with a labelling text. At nested individual dimensioning, it often has been internally deactivated. The mentioned labelling consists of additional functional info texts. The possible indication of hole diameters at separated dimensioning chains is not affected by this. You can directly enter individual data with regard to the labelling text when inserting the dimensioning group. If you want to modify the data later, you have to select the dimensioning group and then call the command labelling of dimensioning chains in the context menu. Then, a dialog opens, identical to the dialog for generating a dimensioning group. Labelling Types None
No labelling texts are added to the dimensioning chains.
Automatic
A labelling text is added to the dimensioning chains, and this text is automatically defined by the component part types or detailings – analogous to previous versions.
Group/Assignment
The labelling text corresponds to the name of the associated dimensioning group or to the assignments. If „Separate Dimensioning Chains‟ have been defined for a component part group, the text corresponds to the name of the assignments (main type).
User-def. Default
The labelling text corresponds to your own default which can be entered in the labelling text field. Thus it is possible to use e.g. short texts or completely different texts.
Select Direction Both Directions
A labelling is added to horizontal and vertical dimensioning chains.
Only Horizontal
A labelling is added only to horizontal dimensioning chains.
Only Vertical
A labelling is added only to vertical dimensioning chains.
Page C.2 - 65
Detailing Style Examples for Dimensioning Structures Beneath please find some examples for different dimensioning groups and assignments: 1) Here a general default “Outside Edges for Each Component Part” is created simply and fast via standard group.
2) Dimensioning via drill holes at dimensioning chains separated by type is desired for poly-plates and shear plates; all other component parts have to be dimensioned via the center axes (via standard group).
3) The result here corresponds to the second example, dimensioning of shape axes however has been defined via a separate independent group. The standard group doesn‟t have any effect at these parts.
Page C.2 - 66
Detailing Style
Dimensioning Chain Settings The settings for the different dimensioning chains are made in the corresponding subordinate groups of dimensioning on the dialog tabs “Reference Points”. Since the structure is the same everywhere, we will now centrally describe the possible selections here without going into special details. The description is based on the general information about dimensioning which you can find abouve. In the overall view of the individual dialog tabs, you will then only find a short survey and hints related to possible special cases.
Individual Default Settings The dialog tab consists of two essential areas: On the left, you select the desired dimensioning group the settings of which you want to modify. To create and edit dimension groups you have to use the rightmouse menue. On the right, you can make separate settings for horizontal and vertical dimensioning direction. Each possible combination can be set independently of the other so that the content on the right changes depending on selection. However, not all combinations are available in all dialog tabs..
Page C.2 - 67
Detailing Style Selection Range Selection Tree (1) Click on a list entry to select the dimensioning group or the component part assignment you want to work on. When it is a matter of add-on dimensions in groups, the possible assignments of component part types and sizes, which can be dimensioned separately, are displayed in the list. When it is a matter of production dimensions at single parts, all selected detailings are displayed which can be dimensioned. Dimensioning Area (2) Here, you select the dimensioning area and the reference direction where the component parts in question have to be dimensioned. Area Selection Global
In principle, the component parts are dimensioned in the global area, i.e. outside of the component part group and with the alignment of the main part.
Local
In principle, the component parts are dimensioned in the local area, i.e. with the alignment of the corresponding reference part.
Global+Local
If the component part in question is directly connected to the main part of the group, it will be dimensioned in global area. On the other hand, if it is connected to another subpart, it will be dimensioned in the local area of this part.
Global+Ignore
The component part in question is dimensioned in global area, if it is directly connected to the main part of the group. Otherwise, it will not be dimensioned.
Ignore+Global
The component part in question is not dimensioned, if it is directly connected to the main part of the group. Otherwise, it will be dimensioned in global area.
Ignore+Local
The component part in question is not dimensioned, if it is directly connected to the main part of the group. Otherwise, it will be dimensioned in the local area.
Alignment According to Ref.
The component part is dimensioned according to the reference direction of the area selection.
Horizontal
The component part is always dimensioned in horizontal and/or in vertical direction, independent of its reference part. However, this option is not available for all cases.
Page C.2 - 68
Detailing Style Sum Up Dimensions (8) Here you select whether the component parts summed up in a common dimensioning group have to be dimensioned together, too or whether a separate dimensioning chain has to be created for each part. Decrease Order of Precedence (3) Click on this button to move the selected entry one place down. If a dimensioning group has been selected here, the complete group will be moved. Otherwise, the component part will be moved within the dimensioning group. If there are several dimensioning chains per page, the list order corresponds to the order of the dimensioning chains in the drawing. Special dimensions will always be added to the part at the end, even if they are placed at another position. Increase Order of Precedence (4) Click on this button to move the selected entry one place up. If a dimensioning group has been selected here, the complete group will be moved. Otherwise, the component part will be moved within the dimensioning group. If there are several dimensioning chains per page, the list order corresponds to the order of the dimensioning chains in the drawing. Special dimensions will always be added to the part at the end, even if they are placed at another position. Linear/Radial Dimensioning Direction (5) Here, you select whether you want to work on the settings for linear or radial (bent) dimensioning chain. You work on the settings the symbol of which is currently displayed. Selection symbol for Linear / Radial
Primary/Secondary View (6) Here, you select whether you want to work on the settings for primary or secondary view. You work on the settings the symbol of which is currently displayed. Selection symbol for Primary / Secondary
Page C.2 - 69
Detailing Style Normal/Aligned Dimensioning (7, single parts and groups) Here, you select whether you want to work on the settings for normal or aligned subpart dimensioning. Normal dimensioning is assigned to the global or to the local area, depending on selection, and the aligned dimensioning is independent of this. You work on the settings the symbol of which is currently displayed. Selection symbol for Normal / Aligned
Outside/Inside Area (7, views) Here, you select whether you want to work on the settings for outside or inside area at overviews. You work on the settings the symbol of which is currently displayed. Selection symbol for outside / inside area
Page C.2 - 70
Detailing Style Adjustment Range Longitudinal Direction (A) Here, you determine the default settings for the position of the dimensioning chain and the used reference points in horizontal dimensioning direction. The values of the currently selected dimensioning chain are displayed. Transversal Direction (B) Here, you determine the default settings for the position of the dimensioning chain and the used reference points in vertical dimensioning direction. The values of the currently selected dimensioning chain are displayed. The meaning of „Horizontal‟ and „Vertical‟ refers to the direction of the used dimensioning area any may locally differ from main direction. The offered possibilities of the different selection lists depend very much on the part area and on the selected dimensioning group. Settings Reference Part (I)
Target point of dimensioning; in most cases, this is a special point, but it can also be a “rule” such as e.g. drill holes.
Reference Part (II)
If need be, you can give further information about the selected part reference.
Reference Connection Reference point of dimensioning; dimensioning chains start here. Additional Dimensions These dimension points are added to the dimensioning chain later and/or occasionally completed as separate dimensioning chain. Style Variants
Here you can select the dimensioning style variants as combination for relative dimensions and coordinate dimensions.
Pos. Dim. Chain (I) Position of the dimensioning chain with regard to the component part or to the reference part Pos. Dim. Chain (II) Here you can limit the display of the dimensioning chains to certain main views of the component part (front view, plan view, etc.) or to a certain position.
Page C.2 - 71
Detailing Style Coordinate Meas.
Execution of coordinate measures resp. certain dimensioning chains are excluded from coordinate dimensioning. Since radial dimensioning chains as well as inside areas of overviews don‟t support any coordinate dimensioning, an alternative is imposed on this input field:
Circular Measures
Execution of radial dimensioning
Info Line Labelling
Information about the current setting of labelling for the dimensioning chains of a dimensioning group: You can enter the data immediately when the dimensioning group is created or later in the selection area via the context menu.
On the following two pages, you will find a table with the most frequent options which are available in the selection lists. In addition, there is a short explanation of the meaning. The selected example refers to inputs for subpart dimensioning of shapes, you can, however, transfer the information to the other component parts or detailings. For an explanation of other special options, please refer to the description of the corresponding dialog tabs.
Page C.2 - 72
Detailing Style
Reference to Component Part (I and II) No dimensioning
The component part is not dimensioned
Outer edges
Both outer edges in dimensioning direction
Center of component part
Geometrical center
Drill holes
Each hole
All holes
First hole
Only the first hole in dimensioning direction
Last hole
Only the last hole in dimensioning direction
First + last hole
The first and last hole in dimensioning direction
Reference point
The projected insertion-/reference axis
Reference points
Both reference points
Front edge
Near edge in dimensioning direction
Rear edge
Far edge in dimensioning direction
Inner edge
Near edge seen from center of reference part
Outer edge Contact edge
Far edge seen from center of reference part Inner edge
Contact edge to reference part (near web)
Outer edge
Contact edge to reference part (outside)
Both edges
Contact edge to reference part (web and outside)
Inner + slope
Inner contact edge and length of gradient
Outer + slope
Outer contact edge and length of gradient
Reference point + drill holes
Combination reference point and drill hole
Outer edges + drill holes
Combination outer edges and drill hole
Drill holes or outer edges
Outer edges if there are no drill holes
Arc center
Center of the circle if circular shape
Automatic depending on type
Reference point depending on shape
Reference Connection Standard
At the bottom/on the left of the reference part or reference point (depending on global default setting).
Reference point
The projected insertion-/Reference axis of the reference part
Border reference parts
Next of the two reference points of the reference part
Border / Edge reference part
Next outer edge of the reference part
Border Group
Next outer edge of the complete group
Beginning reference part
Near edge of reference part in dimensioning direction
Beginning group
Near edge of complete group in dimensioning direction
Middle reference part
Geometrical center of reference part
Center reference part
Center of the circle if circular shape, otherwise geometrical center
Connecting shape
System point of the axes of reference part and component part/connecting shape
Page C.2 - 73
Detailing Style Additional Dimensions None
No further additional dimensions
Ref. part / connecting shape
Outer edges of reference part
Group
Outer edges of complete group
Group and reference part
Outer edges of reference part and of complete group
Reference points
Both reference points of the reference part
Reference part + ref. points
Outer edges and reference points of the reference part
Group + reference points
Outer edges of the group and reference points of the reference part
All additional dimensions
Reference points of the reference part and outer edges ref. part + group
Style Variants No style variants
The program always uses the basic styles
LIN1- / COO-2 etc.
Combinations of different style variants
Position of Dimensioning Chain (I) To part position
Side on which the component part is lying towards the reference part
Opposite part position
Opposite side on which the component part is lying towards the reference part
Always below
Below reference part
Always above
Above reference part
Regular
Increase number of dimensioning chains below and above reference part regularly
Favorable side
Favorable side of the component part towards the reference part
Unfavorable side
Opposite to the favorable side of the component part towards the reference part
Front edge
Near edge in area direction
Rear edge
Far edge in area direction
Inner edge
Near edge in area direction seen from the center of the reference part
Outer edge
Far edge in area direction seen from the center of the reference part
Center
Center of the component part
Front edge + border
Like front edge, but alternatively in the outer area too if border position
Rear edge + border
Like rear edge, but alternatively in the outer area too if border position
Inner edge + border
Like inner edge, but alternatively in the outer area too if border position
Outer edge + border
Like outer edge, but alternatively in the outer area too if border position
Center + border
Like center, but alternatively in the outer area too if border position
Page C.2 - 74
Detailing Style Position of Dimensioning Chain (II) In each view
Dimensioning in each main view of the detail
Only 1x best view
If one dimension of the component part is dimensioned, new dimensioning will not take place
Only if orthogonal
Dimensioning only if component part orthogonal towards the reference part
Only if diagonal
Dimensioning only if component part diagonal towards the reference part
Only if perpendicular
Dimensioning only if component part perpendicular towards the ref. part
Only if parallel
Dimensioning only if component part parallel towards the reference part
Only in front view
Dimensioning only in front view of the detail
Only in top view
Dimensioning only in top view of the detail
Only in front view
Dimensioning only in front view of the detail
Only in rear view
Dimensioning only in rear view of the detail
Only in left view
Dimensioning only in the left view of the detail
Only in right view
Dimensioning only in the right view of the detail
Except for in front view
Always dimensioning except for in front view of the detail
Except for in top view
Always dimensioning except for in top view of the detail
Except for in front view
Always dimensioning except for in front view of the detail
Except for in rear view
Always dimensioning except for in rear view of the detail
Except for in left view
Always dimensioning except for in left view of the detail
Except for in right view
Always dimensioning except for in right view of the detail
Page C.2 - 75
Detailing Style Adopt Primary Default Settings When you want to use the same default settings as selection for primary and secondary view, you can select in the secondary settings the option „like primary‟ as component part reference. Any modifications in the primary settings then will be valid for the secondary view, too.
Copy and Reset Functions Since you can define up to 6 different dimensioning variants for a single list entry, some auxiliary functions are available which can facilitate the setting task. You have access to these functions by calling the context menu of the right mouse key in the selection list of the selection range. Copy Selection of Primary The settings of the primary area for the currently selected group are copied into the secondary area as far as longitudinal and transversal direction are concerned. However, this is only valid for the currently selected dimensioning area. This function is reasonable when you want to modify only one value in the secondary view compared with the primary view. Deactivate Selected Group The component part reference of the currently selected group is set to „No dimensioning‟ for longitudinal and transversal direction for all views and all dimensioning areas. For secondary views it is set to the option „Like Primary‟. Thus, you can easily deactivate dimensioning of component parts without having to remove the whole group. Deactivate All Groups The component part reference of all existing groups is set to „No dimensioning‟ for longitudinal and transversal direction for all views and all dimensioning areas. For secondary views it is set to the option „Like Primary‟. Thus, you can easily deactivate complete parts of dimensioning without having to remove the whole group. The use of the deactivate functions in practice facilitates the optimization of existing settings, because you can rapidly deactivate the entries without having to look for them by means of the different selection possibilities.
Page C.2 - 76
Detailing Style Selected Group Standard Values All settings of the currently selected group are reset to the internally specified standard settings for longitudinal and transversal direction for all views and all dimensioning areas. These correspond to the initial values at creation of the corresponding dimensioning group. All Groups Standard Values All settings of all existing groups are reset to the internally specified standard settings for longitudinal and transversal direction for all views and all dimensioning areas. These correspond to the initial values at creation of the corresponding dimensioning groups. Create Complete Standard Default Setting A complete, internally specified standard setting is created for the selected part area of dimensioning. This setting contains the creation of dimensioning groups to be selected including the component part assignments (as far as possible) as well as the setting with standard default settings. Please note that all existing dimensioning groups, component part assignments and settings will be lost when this function is used! The use of the standard settings functions in practice facilitates the building of user-defined dimensioning structures, because it is always possible to return to a clearly defined initial position in case of unsuccessful setting attempts.
Page C.2 - 77
Detailing Style
Style Variants The allocation of style variants permits you to design a more clearly structured dimensioning. Outer dimensions can be emphasized with larger texts or different dimension ranges can be colored. You could also use dimension chains with tolerance specifications for hole dimensions or, in case you anticipate many “tight” dimensions, you could also work with smaller text. There are many ways to use this option to your advantage. Definition and Assignment of Style Variants One of the existing style variants can be assigned to each dimension chain, independently for relative dimensioning and coordinate dimensioning. However, it is selected as a combination for both types simultaneously via selection list. A dimensioning style is assigned to a style variant in the general settings for dimensioning so that you can read the proceedings on the corresponding dialog tab. Compared with a direct selection of dimensioning style, the advantage of the proceeding via style variant is that you can modify the dimensioning style for several dimension chains together (e.g. after import of detailing style parameters). If you only want to modify the text sizes, you can also make use of the "auto" setting, because here a style with smaller and bigger sizes (factor 0.7 or 1.4) will be automatically created from the selected dimensioning style for standard size. However, if you also want to modify the colors or select other text sizes, you have to select a separate AutoCAD dimensioning style. Combinations (Selection) No Style Variant:
The corresponding basic style is used for relative dimensions and for coordinate dimensions.
Always Variant 1:
The corresponding style variant 1 is used for relative dimensions and for coordinate dimensions.
STD / COO-1:
The corresponding basic style is used for relative dimensions and the correspoinding style variant 1 is used for coordinate dimensions.
LIN-1 / STD:
The corresponding style variant 1 is used for relative dimensions and the correspoinding basic style is used for coordinate dimensions.
LIN-1 / COO-2:
The corresponding style variant 1 is used for relative dimensions and the correspoinding style variant 2 is used for coordinate dimensions.
Page C.2 - 78
Detailing Style
Settings for Individual Dimensioning In contrast to the standard settings for dimension chains where you find independent parameter records for the different component part groups, only one single data record per part area of dimensioning is available for individual dimensioning (nested dimensioning). In very complex cases such as e.g. dimensioning of component part groups within assemblies, you don‟t find an individual parameter record any more. Due to the great number of settings for component part groups, the parameter records for standard dimensioning of component part groups will be used here instead. It is assumed that the settings are very similar in most cases. This is analogous to dimensioning of main parts in groups which is also controled via the default settings for dimensioning of single parts. A differentiation can be made here via filter specifications. It is true that there is only one single parameter record for dimensioning, but you can include or exclude certain component parts and parameters by means of filters.
Individual Filter The dialog tab consists of two essential areas: On the left side you select the desired dimensioning group the settings of which have to be modified. The dimensioning groups can also be managed via a context menu. On the right side you can specify the filter settings for the parameter record of individual dimensioning.
Page C.2 - 79
Detailing Style Selection Area Selection Tree (1) Here you select the dimensioning group or component part assignment you want to work on by clicking an entry. The assignments of component part types and sizes forming an individual independent filter group will be displayed. Dimensioning Area (2) Here you select the reference direction to which a limitation of alignment (e.g. only perpendicular) refers. Setting Area Component Part and Parameter Filter (A) Here you determine the default settings for component part and parameter filter. The values of the currently selected dimensioning group will be displayed. You can only exclude properties, i.e. if the function has not been generally activated in the parameter record, the default setting doesn‟t have any effect here. Settings Part Reference (I)
Here you specify whether an individual dimensioning has to be effected for the assigned component parts. If it is the individual dimensioning of a group, filtering takes place via the main part of this group.
Part Reference (II)
Detailings or add-on parts are dimensioned.
Overall Length
The overall length is dimensioned.
Overall Width
The overall width is dimensioned.
Hole Labelling
The hole diameters are labelled.
Pos. Dim. Chain (I) Here you can limit the individual dimensioning to certain views of the component part to be dimensioned. Pos. Dim. Chain (II) Here you can limit the individual dimensioning to certain views of the actual detail (front view, plan view, etc.) or to alignments with regard to the reference part. Filter
Here you can specify additional filter conditions.
On the following page, you will find a table with the most frequent options which are available in the selection lists. In addition, there is a short explanation of the meaning.
Page C.2 - 80
Detailing Style
Reference to Component Part Default Reference Points
Detailings or add-on parts are dimensioned as specified.
Default Hole Dimensions
Only drill holes are dimensioned as specified.
Default Contour Dimensions
Only contour dimensions are dimensioned as specified
No Detailings
No detailings or add-on parts are dimensioned.
Overall Length/Overall Width Dimension
The overall length/width is dimensioned as defined in ‘‚Reference Points’.
No Dimension
The overall length/width is not dimensioned
Hole Labelling Default Labelling
The drill holes are labelled according to the defaults settings for labelling.
No Labelling
The drill holes are not labelled
Position Dimension Chain Only Primary
The component part is only dimensioned if it is visible in primary position.
Only Secondary
The component part is only dimensioned if it is visible in secondary position.
Primary+Secondary
The component part is dimensioned in primary and secondary position.
Filter No Filter
No additional filter has been activated.
Each Part 1x
Parts having the same position number are only dimensioned 1x.
Example for Individual Dimensioning Let us assume that you have a shape, a poly-plate and some more add-on parts in a group. As for the shape, you only want to dimension the drill holes, but the poly-plate has to be dimensioned completely and the other component parts haven‟t to be dimensioned at all. In order to do this, you create two dimensioning groups and assign „Shapes‟ to the first and „Poly-plates‟ to the second as component part type. All desired dimensioning options are now permitted in the parameter record, i.e. all detailings and the overall dimensions as well and they are set accordingly. Now, activate the dimensioning group with the assigned shapes only for „Default Hole Dimensions‟, and the dimensioning group with the assigned polyplates for all possible options. Deactivate the dimensioning group „Standard‟ to exclude all remaining parts from dimensioning.
Page C.2 - 81
Detailing Style
Tab Common
Group Dim Chains Method
Page C.2 - 82
Here, you define the fundamental method of automatic component part dimensioning. Steel Standard – Standard dimensioning of ProSteel; however, only ProSteel component parts will be evaluated. Steel US - Additional information is added to dimensioning chains and details as common in the USA. Only ProSteel component parts will be evaluated Concrete Standard - Standard dimensioning of ProSteel; however, only ProSteel component parts will be evaluated. Steel + Concrete Standard - Standard dimensioning of ProSteel; however, all component parts will be evaluated Steel + Concrete US - Additional information is added to dimensioning chains and details as common in the USA. All component parts will be evaluated. As far as the difference of US-dimensioning to standard default settigs is concerned, please refer to a separate section of this chapter for more detailed information.
Detailing Style Kind of Dimensioning
Here, you select the kind of distance measuring between the different dimensioning points. Relative – customary relative dimension chains are attached. Coordinates – dimensioning chains are attached with continuous dimensioning to a fixed reference point. Mixed – relative dimension chains and – at the same time here included – the corresponding coordinate dimensions are attached. However, you have the option to exclude certain freely selectable dimensioning chains from coordinate dimensioning.
Associative Dim.
The dimensioning is created as really associative dimensioning without text overwriting as far as possible. In case of manual manipulations dimensioning is automatically adapted to the measured values.
With Optimization
The program will position the dimensioning texts in a better way according to the settings on the page „Optimization‟. Optimization can be switched off later if you want to displace the dimensions manually according to another method or if you do not expect overlaps. You will then obtain the dimensions on the position where AutoCAD would place them automatically.
Divide Hole Rows
At hole dimensioning each individual hole diameter gets its own dimension chain. The dimensioned hole diameter then is indicated on the dimension line.
Weld Cracks Extra
Small welding cracks will be assigned their own dimensioning line. This is a minor option if „Divide Hole Rows‟ has been selected because here a distinction is made between diameters anyway.
Diameter on Line
At hole dimensioning the hole diameter is indicated on the dimension construction line if „Divide Hole Rows‟ has been selected.
Label Dim. Lines
The things located by dimension chain are written as additional text to the end of dimension line. The text depends on the settings for dimensioning groups.
> Hole Assignment If this field has been checked, a text is added to inform about the assignment to position (top/bottom) for dimension chains of drill holes which are divided according to depth position (Zdirection). Gradient Reference Angle measures can be indicated as gradient instead of as angle. Here you enter the reference value for calculating the gradient.
Page C.2 - 83
Detailing Style Group Standard Dimensioning Style and Coordinate Style Upper Selection List Here you can select the dimensioning style (AutoCAD) to be used for the dimensioning in question. This style is going to control all properties such as text colour, text size, etc. For radii and angles the corresponding subordinate style of an AutoCAD dimensioning style can additionally be used. Variant 1 / 2 / 3
Here, you can indicate three alternative styles to be assigned as style variant to different dimension chains. If you have selected the entry ‚Auto Smaller', a copy with smaller text sizes (factor 0.7) is generated from the basic style. If you have selected the entry ‚Auto Larger', a copy with larger text sizes (factor 1.4) is generated from the basic style. Style variants allow you e.g. to emphasize overall dimensions or to use smaller texts when space is limited.Please also refer to section Style Variants in this chapter.
Coordinates
Here you select the kind of coordinates. Rotated Dimensioning Chain – The coordinates are attached beside the second construction line as a measure which is rotated by 90°. Some parameters of dimensioning style are modified at this occasion. Like Dimensioning Style – The coordinates are attached in the indicated dimensioning style without any modifications. AutoCAD Coordinates – The coordinates are attached in the indicated dimensioning style without any modifications as real AutoCAD coordinates.
Coordinates Extra
Any possibly existing coordinates dimensioning chains are summed up to one dimensioning chain per dimensioning side and attached completely outside. Mixed dimensioning chains are transformed into standard relative dimensioning chains.
Page C.2 - 84
Detailing Style
Tab Common Holes
Group Holes in Plan View Diameter
The hole diameter is written beside the hole groups. If the value doesn‟t change, the diameter is only indicated once per hole row or complete hole group. The text is always aligned in main dimensioning direction.
> Text Size
Enter the text size for labeling here.
> Distance
Here, you can indicate the distance of the insertion point of diameter labeling from the hole. This distance is measured from the border of the hole.
> Angles
Here you can enter the angle between the insertion point of diameter labeling and the hole. The value 0 corresponds to the main dimensioning direction. You can indicate positive (rotating to the left) and negative values.
> Connect Axes
Common axis lines are displayed within the hole groups if the „Divide Hole Groups‟ setting has been checked.
Only Visible Holes
Only those holes are dimensioned which are visible in the corresponding view. At a plan view for example, the holes of the shape‟s bottom flange are not dimensioned unless they were visible due to gaps in the upper flange.
Page C.2 - 85
Detailing Style Divide Top/Bottom
The drill holes of upper and bottom side of the component part are dimensioned in an individual dimension chain. The assignment refers to the relative position towards view plane (Z=0).
Oblong Holes
Here you can select how to dimension and label oblong holes. You may choose between different combinations of hole axes and hole lengths to dimension according to production. For more detailed intormation please refer to the general explanations with regard to oblong holes
New Dimensions to Here, you enter the distance from one hole group resp. drill hole dimensioning to the other at which a new (redundant) dimensioning has to be carried out. This permits a clearer dimensioning of far away positioned identical hole screen dimensions as the dimension chains resp. the indications of diameters are repeated.
Group Holes in View As Back Pitch
You enter the back pitches including the diameter of the parallel drill holes. Continous constant back pitches are displayed as a group.
> Text Size
Here, you enter the text size for back pitch labeling.
> Distance
Here, you can indicate the distance of back pitch labeling from the edge of the component part. Positive values signify a labeling outside the component part, negative values signify a labeling inside the component part.
> Marking Area
Beginning and end of a hole group are displayed by a marking.
Oblong Holes
Here you can select how to dimension and label oblong holes. You may choose between different combinations of hole axes and hole lengths to dimension according to production. For more detailed intormation please refer to the general explanations with regard to oblong holes
New Dimensions to Here, you enter the distance from one back pitch to the other at which a new (redundant) dimensioning has to be carried out. This permits a clearer dimensioning of far away positioned identical back pitches as the indications are repeated.
Page C.2 - 86
Detailing Style Group Gusset Plates Holes in gusset-plates are dimensioned in groups with reference to the system axes of the connected shapes. You can make the basic settings here. For more detailed information, please refer to the general explanations with regard to gusset-plate dimensioning. > System Axis
The system axes of the shapes connected via gusset-plate are displayed.
> Offset System
The extension of the displayed system axis beyond the system point.
> Offset Plate
The extension of the displayed system axis beyond the edge of the plate.
> Gradient
The gradients of the shapes connected via gusset-plate are displayed.
Group Miscellaneous Hole Group Reference Here, you select how to dimension drill holes in main parts or in subparts (only length direction) if the option „hole group reference‟ has been selected there. None – hole group reference is completely deactivated. Connecting shape – The hole groups are refered to the intersection points with the axis resp. reference line (depending on the default setting) of the corresponding connecting shape. First hole – The hole groups are refered to the first hole of the hole group in dimension direction. Last hole – The hole groups are refered to the last hole of the hole group in dimension direction. For more detailed information, please refer to the general explanations with regard to hole group reference. Of Reference Point The reference points of the shapes are used for determining the reference points of connected shapes. Otherwise, their center axis is used. Connecting Shapes The reference points of the connected shapes are dimensioned in a separate dimensioning chain if in groups subparts dimensioning is refered to it.
Page C.2 - 87
Detailing Style > Coordinate Dim.
Here, you select how to dimension the reference points of the connected shapes with coordinate measures. None – No coordinate measures are attached. Origin Detail – Coordinate measures are attached and measured from the origin of the group (main part). Origin Model – Coordinate measures are attached and measured from the origin of the model Thus, it is possible to get e.g. at supports the absolute height in the model as coordinate value.
Search Area
Here, you can specify the maximum distance up to which a hole in the subpart or main part is assigned to the corresponding reference point of the connected shape or hole group.
Oblong Holes The horizontal dimensioning and labelling of oblong holes depends on the kind of production. Four independent variants are available here beside the option „No Dimensioning‟ (for manual dimensioning) and the option „According to Hole Type‟ (not yet supported at the very moment): Hole Axes The hole axes are dimensioned and the hole distance is indicated at labeling.
Hole Length The outer edges are dimensioned and the hole length is indicated at labeling.
Hole Center+Hole Axes The center of the hole is dimensioned and the axis distance is indicated at labeling.
Hole Center+Hole Length The center of the hole is dimensioned and the hole length is indicated at labeling.
Page C.2 - 88
Detailing Style Hole Group Reference Hole group in component parts, here mainly in component part groups, get further reference dimensions in addition to the standard add-on dimensions of subparts. In this example, a connecting butt strap is dimensioned with reference to the holes. Add-on Dimension in Component Part Group (1) The butt strap is dimensioned with reference to the connecting shape, here to its insertion reference point. Hole Group Reference (2) The connecting shape is selected for hole group reference as well. Alternative Possibility (3) (4) Alternatively, the hole group reference can also be made to the first hole (3) or to the last hole (4). The drill holes are always dimensioned with relative measures at hole group reference, selection of coordinate measures, however, influences the dimension of hole group reference (2). Gusset-Plate Dimensioning Drill holes in gusset-plates of component part groups can be dimensioned as displayed in the example. In most cases, this dimensioning serves for drawing control, if single part drawings are generated. Longitudinal Direction (1) Here, the reference point of dimensioning is the edge of the plate. In addition, the dimensioning chain is completed to the system point (3). Transversal Direction (2) Here, the reference point of dimensioning is the system point (3); however, a reference to the edges of the plate is possible as well. The defaults are displayed as additional entry in the selection list for component part types of group dimensioning and therefore can be attached in addition to standard dimensioning of poly-plates.
Page C.2 - 89
Detailing Style
Tab Common Distances
Group Dimensioning Area Selection List
In the selection list you choose the dimensioning area you want to work on. The current values are entered in the input fields on the right. Global Area – The global outer area of dimensioning. Local Area – The local inner area of dimensioning; as vertical dimensions of a component part group are always local, they are controled here as well. Connection Area – The local inner area of dimensioning at aligned dimensioning. Individual Dimensions... – The different inner areas at individual dimensioning within component part groups, etc. Manual Dimension Points – The areas of manual dimension points.
Group Distances Most data can be indicated here independently for horizontal, vertical and inner dimensioning direction. The fields on the left correspond to horizontal direction (main direction), the fields in the middle correspond to vertical direction (transversal direction), the fields on the right correspond to inner direction (independent direction). To 1st. Dim. Chain
Here, you enter the distances from the outer limit of the st component up to the 1 dimension line.
Between Dim. Chains Here, you enter the distance between the individual dimension lines of an area succeeding the first line.
Page C.2 - 90
Detailing Style Construction Line to Component Here you enter the distance from the start of construction lines up to the outer limit of the component or of the dimensioning area in question. Entering the value 0 will not cut the construction lines at the edges but they are extended to the corresponding points to be dimensioned. If you selected ‟Fixed Construction Line Length‟ option, the meaning of the fields changes, and you enter the length of the dimension construction lines. Construction Line to Dim. Chain Here you enter the distance of the construction lines of a successive chain up to the previous dimension chain. Entering the value 0 will not cut the construction lines at the previous dimension chains but they are extended to the outer limit of the component or of the corresponding area to be dimensioned. Fixed Line Length
If this field has been checked, the construction lines have exactly the length specified in the input fields „Length of Construction Lines‟. If this field has not been checked, the dimension chains are cut at each other with the distances indicated in the distance fields.
Edge Horizontal
Here you indicate the minimum distance hole group dimensioning or subpart dimensioning may have up to the end of the component before it is moved to the outside.
Group Tabular Survey In the diagram, you see a survey on all available settings to be able to control them at a glance. Information about horizontal and vertical dimension is summed up (Horizontal/Vertical). Rows
the different parameters for setting
Columns
the different dimensioning areas
Please refer to the corresponding chapters of the introduction to dimensioning for the meaning of the different dimensioning areas and of individual dimensioning (nested dimensioning).
Page C.2 - 91
Detailing Style
Tab Common Optimization
Group Text Display No Inch Signs
The inch signs are suppressed at dimensioning in the imperial system (foot/inches).
Adapt Text Size
A dimension chain is automatically changed to the style variant 1 Auto smaller (x0.7), if thus collisions can be avoided. If the dimension chain has already this style variant, no modification takes place. If a dimensioning style has been assigned to style variant 1, this style will be used instead, even if it wouldn‟t have such a favourable text height – which might be!
Text Size
The text size for dimension chain labelling.
Elevation Prefix
This text is placed in front of the coordinate dimensions, if you have selected „origin model‟ as dimension reference.
Distance RD
The horizontal distance of the RD symbol from the reference edge of the component part at American dimensioning.
RD Symbol Size
The size of the RD symbol at American dimensioning.
Colour RD
Here, you enter the AutoCAD-colour number with which the text of the RD symbol has to be displayed at American dimensioning.
Colour End Condition
Here, you enter the AutoCAD-colour number with which the text of the RD symbol has to be displayed at American dimensioning.
Page C.2 - 92
Detailing Style Colour Diameter
Here, you enter the AutoCAD-colour number with which the text of the hole diameter has to be displayed.
Colour Gage Dimension Here, you enter the AutoCAD-colour number with which the text of the gage dimension has to be displayed Colour Mounting
Here, you enter the AutoCAD-colour number with which the text of the mounting of subparts has to be displayed
Group Build Groups Same Dimensions
Several consecutive identical distances are combined into one shared dimension, e.g. 3 dimensions à 100 are combined into one dimension with the dimension text 3x100.
> Min. Count
Here, you specify the number of identical dimensions from which on they are combined in a group.
> Postfix
Here, you specify which text has still to be added to the number (if you enter e.g. „x‟, you‟ll get „5x100‟).
Similar Dimension Lines Dimension chains containing few dimensions (e.g. one single drill hole) are integrated into another dimension chain. It may be that something different has been dimensioned in this other dimension chain (e.g. outer contour). The overall dimensions are excluded from this. Group Text Position Don’t alternate
The text remains on its original height on the dimension line and is only optimized according to the other default settings.
Only Above
The text is moved only above the neighboring text so that they overlap horizontally, but not vertically.
Above and Below
The text is moved above and below the dimension line so that they overlap horizontally, but not vertically.
Above Dim.Help Lines The text is moved across the construction help lines if it does not fit in between above the dimension line (even if otherwise not colliding with any other neighboring dimension). No text between...
The text is supposed to be colliding and optimized if it does not fit in between above and below the dimension line (even if otherwise not colliding with any other neighboring dimension).
Page C.2 - 93
Detailing Style Move Outer Dimensions Outside The two outer dimensions are moved beside the dimension line in horizontal direction. Move Inner Dimension Horizontal The inner dimension texts are moved horizontally across the construction help lines into a neighboring dimension if there is enough place.
Tab Common Optimization Min/Max
Group Distances Smallest Distance
Here, you enter the smallest length to be dimensioned. If the distance to be dimensioned is smaller than this value, it will be added to the next dimension.
Min. Text Distance
In the field on the left you enter a value indicating how close together dimension texts within a dimension chain may be without triggering the collision alarm. In the field on the right you enter a value indicating how close together dimension texts may be at a neighboring dimension when moved into this. Thus, a movement can be avoided if there might be any possibility of confusion of dimensions due to the small distance.
Min. Dist. Between... Here, you enter a value indicating how close together dimension texts of different dimension chains may be without triggering the collision alarm. Sum up
Page C.2 - 94
Here you enter the maximum distance up to which subpart dimension chains in transversal direction at groups are summed up to a common dimension chain.
Detailing Style Max.Snap Area
Here, you enter the maximum distance up to which a component part is still assigned to the border area of a group. This influences the arrangement of dimension chains at local dimensioning.
Group Diagonals Angle Min./Max.
Here you enter the minimum and maximum angle the shape must resp. is allowed to have towards main dimensioning direction to be recognized as diagonal. This option permits you to prevent that e.g. a roof girder is dimensioned as diagonal.
Min. Length
Here, you enter the minimum length the shape must have to be recognized as diagonal.
Flat Steel not as...
Shapes of flat steel are not recognized as diagonal and excluded from diagonal dimensioning. You can thus prevent that e.g. a top chord of a haunch is dimensioned as diagonal.
The picture below shows the different optimization settings for texts in dimension chains:
Page C.2 - 95
Detailing Style
Tab SingleParts
Group General Radius
Circle radii of component contours are dimensioned. If defined, the subordinate radius style of the selected AutoCAD dimensioning style is used
Reference Point
At selection of „Standard‟ option for the reference to the component part, the dimensioning is related to the reference point of the component part. Otherwise, it is related to the outside edges.
Page C.2 - 96
Detailing Style
Tab SingleParts ReferencePoints
Settings Here, you select the treatments for which you want to attach single part dimensions in the detail and determine the dimension points as well as the position of dimension chains. For the essential settings on this dialog tab, please refer to the general descriptions of defaults for dimensioning chains. List of Dimensioning Groups The following dimensioning groups can be added: Modifications Outer Contour
Running of outer contour
Inner Contour
Running of inner contours (inner sections)
Drill holes as plan view
Drill holes which can be seen as visible or invisible hole circle
Drill holes as view
Drill holes which can be seen as intersection or hidden solid
Angle of intersection
Diagonal edges of components in the outer contour
Radius center
Centers of radii in outer and inner contour
Special Dimensions Reference Points
Dimensions of the position of the two reference points
US-cope
American lengths and depths for copes at the end
Part Groups Fittings
Dimensions of the position of integrated fitting elements at concrete panels
Page C.2 - 97
Detailing Style Special Forms of Dimensioning Apart from the usual dimension of outer contour and drill holes over length and width of the component part, you can select different other forms of dimensioning for single parts, too. Outer Contour / Inner Contour Standard
Normal dimensioning over the outer contour in dimensioning direction
Individual outside
Each edge is individually dimensioned in its alignment; placing outside
Individual inside
Each edge is individually dimensioned in its alignment; placing inside
Standard + Individual outside
Combination of Standard and Individual edges outside
Standard + Individual inside
Combination of Standard and Individual edges inside
Min / Max
Min/Max contour dimensioning (see ‘outer contour’)
Standard + Min / Max
Combination of Standard and Min/Max (see ‘outer contour’)
Drill Holes Common
Normal dimensioning over the drill holes in dimensioning direction
Reference to Edge
The holes are dimensioned to the next edge of the component part
Hole Groups
Groups of identical holes are dimensioned once in transversal direction
Common + Edges
Combination of standard dimensioning and reference to edge
Hole Groups + Edges
Combination of hole group dimensioning and reference to edge
Angle of Intersection Angle towards Vertical Line
The angle towards the imaginary vertical reference line (opening angle)
Angle towards Horizontal Line
The angle towards the horizontal component direction (material angle)
Bevel Symbol
Bevel symbol (triangle) of the edge related to reference length or -height
The following examples show you the results of the different extended forms of dimensioning for single parts: Reference to Edge (1) and Individual Edges (2) The holes are related perpendicularly to the following edge of the plate; the edges of a plate are dimensioned individually.
Page C.2 - 98
Detailing Style Min/Max (1) At a hollow shape, the maximum extension of the interior wall (A) is dimensioned with the dimension chain (C) and the minimum extension is dimensioned with the dimension chains B. Possible cut-outs haven‟t any influence.
Min/Max (2) At a standard shape the longest exterior area on the upper and lower side is dimensioned with a single measure at a time despite the cut-outs.
Reference to Edge Inside/Outside The outer contour is dimensioned with the combination of standard dimensioning and individual edges inside (only the diagonal edges are dimensioned with individual measures). The inner contour is dimensioned with the combination of standard dimensioning and individual edges outside (all edges are always dimensioned with individual measures).
Common Drill Holes (1) The drill holes are dimensioned in a common dimension chain at the edge.
Hole Groups (2) Inner hole groups are dimensioned separately in their own dimension chains.
Page C.2 - 99
Detailing Style
Tab SingleParts US-Cope
Group General Equal Cope 1x
Copes with the same dimensions are dimensioned only once.
Remarks
Generally added annotation (if need be, it is replaced by automatically created annotations).
Create Remarks
An annotation is automatically added to the dimensioning to indicate identical copes.
> Up/Below
Annotation which is added above and below in case of identical copes.
> Start/End
Annotation which is added at the beginning and at the end in case of identical copes.
> Type
Annotation which is added for more than two identical copes.
Group Left Side Measure Selection
Here you indicate, whether the dimensioning of the cope has to be indicated in the form Length x Depth of cope or in the form depth x length of cope.
Prefix
This text is placed in front of the dimension.
Postfix
This text is added to the indicated measure.
Page C.2 - 100
Detailing Style Group Right Side Measure Selection
Here you indicate, whether the dimensioning of the cope has to be indicated in the form Length x Depth of cope or in the form depth x length of cope.
Prefix
This text is placed in front of the dimension.
Postfix
This text is added to the indicated measure.
Dimensioning of cut-outs according to this scheme is often used in the USA and replaces a detailed dimensioning of outer contour for standard-shapes with copes at the end.
Page C.2 - 101
Detailing Style
Tab Groups
Group General Main Part
The main part of the component part group is dimensioned with the most important dimensions like a single part.
> Main Part First
The first dimension chains in the global dimensioning area of the component part group are the dimension chains of the main part; otherwise the dimension chains of the subpart
> Direct at the Part
The dimension chains of the main part are attached directly to the component part. Normally, they are also attached in the global area. In case of very extensive groups it is however reasonable to select this option.
Subparts
The position of subparts in the group is dimensioned.
> Repeat
Within a view, identical part dimensions are dimensioned only once in transversal direction. Otherwise, each subpart is again dimensioned redundantly.
Endplate
The additional tilt endplate details are dimensioned like a single part as well.
Reference Point
The dimensioning of subparts is related to the reference point of the main part unless no other defaults were made at the corresponding places. Otherwise, it is related to the outside edges of the main part.
Page C.2 - 102
Detailing Style
Group Detail Dimensioning For Add-on Parts
Subparts in component part groups are dimensioned in separate local areas together with the most important dimensions like single parts. You can enter further specifications on a separate page of this parameter group.
For Subgroups
Subgroups in component part groups are dimensioned in separate local areas together with the most important dimensions like component part groups. You can enter further specifications on a separate page of this parameter group.
Dimensioning of Main and Subparts In the following examples, you see favourable selections for arranging main and subpart dimensioning in a component part group:
The standard setting, i.e. to dimension everything outside the group, is the optimal setting for this component part group. Main part dimensioning (1) is made first, followed then by subpart dimensioning (2). The flange of the haunch (3) however is dimensioned with local part reference.
Here, on the contrary, individual subpart dimensioning has been selected for the subparts (2) and for the main part (1) the dimensioning direct to part has been activated. Standard subpart dimensioning, however, has been deactivated.
Page C.2 - 103
Detailing Style
Tab Groups ReferencePoints
Settings Here, you select the component parts for which you want to attach add-on dimensions in the main views of the detail (front viw, plan view, etc.) and determine the dimension points as well as the position of dimension chains. For the essential settings on this dialog tab, please refer to the general description of defaults for dimensioning chains.
List of Dimensioning Groups The following special dimensions may be added apart from the different component part groups for shapes, poly-plates, etc already described in the introduction: Special Dimensions Reference Points
Position dimensions of the two reference points of the main part
System Dimensions
System dimensions of the components connected to the main part
Diagonal Dimensions
Length and system dimensions for diagonal shapes
Manual Dimension Points
Manual dimensioning objects from the 3D model for groups
Local reference planes
Position of reference planes (connecting shapes) at reference to the connecting shape
Additional dim. gusset plate
Additional dimension for drill holes in gusset plates
Page C.2 - 104
Detailing Style Special Forms of Dimensioning Some additional dimensionings for diagonal shapes as well as system dimensions may be added via special dimensions. System points here are the points of intersection of the center axes of connected shape and reference shape. Diagonal Dimensions Length
Overall length of the diagonal
System distance
Distance of the end points to the system point which is situated next
System length
Distance of system points
System Dimensions On system position
The position of the dimension chains depends on the position towards the axis of the main part
Own dim. chain (secondary)
System dimensions of secondary position always get their own dim. chain
Primary dim. chain (secondary)
System dimensions of primary/secondary position only get one dim. chain
Additional Dimensions Gusset Plate (Related to Reference) System point
Reference to the system point of reference part and hole field direction
Plate edge
Reference to the plate edge situated next in hole field direction
Diagonal and System Dimensions Here you can see some examples of diagonal and system point dimensioning: Diagonal Dimensions Here you see the length of a diagonal (1), its distances to the two system points (2) and the system length (3). In addition, dimensioning of the system points (4) of the main part has been added.
System Dimensions Here you see the system dimensions of connecting shapes which are in primary (1) and secondary (2) position to the main part. Separated dimesion chains have been selected.
Page C.2 - 105
Detailing Style
Tab Groups ReferencePoints Endplate
Settings Here, you select the treatments for which you want to attach single part dimensions in the tilt endplates of the detail and determine the dimension points as well as the position of dimension chains. For the essential settings on this dialog tab, please refer to the general description of defaults for dimensioning chains and to the default settings for single part reference points.
Page C.2 - 106
Detailing Style
Tab Groups ReferencePoints Section
Settings Here, you select the component parts for which you want to attach add-on dimensions in the section views of the detail and determine the dimension points as well as the position of dimension chains. For the essential settings on this dialog tab, please refer to the general description of defaults for dimensioning chains and to the default settings for group reference points.
Page C.2 - 107
Detailing Style
Tab Groups IndividualParts
Settings Here, you select the component parts for which you want to attach individual single parts dimensions in the main views of the detail. You also determine which fundamental dimensions have to appear in which views. The fundamental settings with regard to dimensioning (position etc.) are globally valid for all individual dimensionings together; however, you can individually exclude certain component parts and dimension chains here. For some settings on this dialog tab, please refer to the general description of the default settings for individual dimensioning.
Page C.2 - 108
Detailing Style
Tab Groups IndividualParts ReferencePoints
Settings Here, you select the treatments for which you want to attach individual single part dimensions in the main views of the detail and determine the dimension points as well as the position of dimension chains. For the essential settings on this dialog tab, please refer to the general description of defaults for dimensioning chains and to the default settings for single parts reference points.
Page C.2 - 109
Detailing Style
Tab Groups SubGroup
Settings Here, you select the subgroups for which you want to attach individual add-on dimensions in the main views of the detail and determine which fundamental dimensions have to appear in which views. Filtering is made via the main part of the subgroup. The fundamental settings with regard to dimensioning (position etc.) are globally valid for all individual dimensionings together; however, you can individually exclude certain component parts and dimension chains here. For some settings on this dialog tab, please refer to the general description of the default settings for individual dimensioning.
Page C.2 - 110
Detailing Style
Tab Groups SubGroup ReferencePoints
Settings Here, you select the add-on parts for which you want to attach individual add-on dimensions in the main views of the detail (front view, plan view, etc.) and determine the dimension points as well as the position of dimension chains. For the essential settings on this dialog tab, please refer to the general description of defaults for dimensioning chains and to the default settings for groups reference points.
Page C.2 - 111
Detailing Style
Tab Assemblies
Group Detail Dimensioning For Add-on Parts
Loose single parts in assemblies are dimensioned like single parts in their own local areas together with the most important dimensions. You can enter further instructions on a separate page of this parameter group.
For Groups
Groups in assemblies are dimensioned like groups in their own local areas together with the most important dimensions. You can enter further instructions on a separate page of this parameter group.
For Subgroups
Subgroups in assemblies are dimensioned like groups in their own local areas together with the most important dimensions. You can enter further instructions on a separate page of this parameter group.
> Parameter Selection Here you indicate which area of reference points in groups has to be used for dimensioning of subgroups. Like Groups – The settings for the reference points of standard add-on parts are used. Like Subgroups – The settings for the reference points of addon parts in subgroups are used. Depending on the importance of the subgroup, you thus obtain a uniform dimensioning at multiply nested groups within an assembly.
Page C.2 - 112
Detailing Style Components of Structural Dimensioning Assemblies are the most complex structure within ProSteel. Dimensioning accordingly is rather extensive if you make use of all possibilities offered by individual dimensioning. All directly subordinate structures within the assembly are treated like one single component part, i.e. a complete group is dimensioned on its maximum dimensions. If you want to dimension the inner structure of such a group, use individual dimensioning instead. Since group dimensioning including possible subgroups requires a great number of parameters, no separate independent parameter record will be available any more in the part area assemblies. In this case, the program falls back on the settings for groups.
The following picture shows the reduction to subordinate structures. You see the complete assembly (1), the group (2) contained in the assembly and the subgroup (3) which again is contained in the group.
Page C.2 - 113
Detailing Style If you now look on the different sharets of dimensioning, you will recognize very well that the different areas are independent of each other. Since you can globally deactivate complete areas, even complex structures can be clearly set without losing track. Basic Dimensioning The group here is considered as a whole and globally dimensioned using the default settings „Reference Points‟. Each individual dimensioning of the assembly has been deactivated. Group Dimensioning Here, the basic dimensioning has been deactivated and the individual dimensioning for groups in assemblies has been selected. For groups the dimensioning of subgroups contained in these groups has been deactivated. Subgroup Dimensioning Here, the basic dimensioning has been deactivated and the individual dimensioning for groups in assemblies has been selected. There, however, all add-on parts have been deactivated and only the individual dimensioning of subgroups has been selected.
Page C.2 - 114
Detailing Style
Tab Assemblies ReferencePoints
Settings Here, you select the component parts or main and subgroups for which you want to attach individual add-on dimensions in the main views of the detail (front view, plan view, etc.) and determine the dimension points as well as the position of dimension chains. A complete group is dimensioned over its outer dimensions like a single component part. For the essential settings on this dialog tab, please refer to the general description of defaults for dimensioning chains and to the default settings for groups reference points.
List of Dimensioning Groups The following special dimensions may be added apart from the different component part groups for shapes and poly-plates, as well as a general group already described in the introduction: Special Dimensions Diagonal Dimensions
Length and system dimensions for loose diagonal shapes
Manual Dimension Points
Manual dimensioning objects from the 3D model for assemblies
Page C.2 - 115
Detailing Style
Tab Assemblies GroupDetails
Settings Here, you select the groups for which you want to attach individual add-on dimensions in the main views of the detail and determine which fundamental dimensions have to appear in which views. Filtering is made via the main part of the group. The groups can either be standard component part groups (these are groups which themselves can contain subgroups) or they are explicitely named subgroups on the same hierarchy level as the standard component part groups. The fundamental settings with regard to dimensioning (position etc.) are globally valid for all individual dimensionings together; however, you can individually exclude certain component parts and dimension chains here. For some settings on this dialog tab, please refer to the general description of defaults for individual dimensioning. No separate independent parameter record is available for the individual dimensioning in assemblies. In this case, the program falls back on the parameters for groups or subgroups in component part groups. If it is an individual dimensioning of single parts, the corresponding parameter record for groups will be used as well. Apart from a reduction of parameters a constant drawing view of component part groups between (a) complete assemblies with individual dimensioning or (b) individually displayed component part groups of this assembly will be guaranteed by this – assuming that both groups are using the same detailing style.
Page C.2 - 116
Detailing Style
Tab ConnectingGusset
Settings Here, you select the component parts for which you want to attach individual single part dimensions in the main views of the detail and determine which fundamental dimensions have to appear in which views. The fundamental settings with regard to dimensioning (position etc.) are globally valid for all individual dimensionings together; however, you can individually exclude certain component parts and dimension chains here. For some settings on this dialog tab, please refer to the general description of defaults for individual dimensioning. The details of connecting gussets mainly show the connection elements such as endplates, webangles etc. of the connections. The involved main shapes are only displayed as section. Therefore, dimensioning is limited to an individual dimensioning of the involved connection elements and of the final detailings of shapes.
Page C.2 - 117
Detailing Style
Tab ConnectingGusset ReferencePoints
Settings Here, you select the treatments for which you want to attach individual single part dimensions in the main views of the detail and determine the dimension points and the position of dimension chains. For the essential settings on this dialog tab, please refer to the general description of defaults for dimension chains as well as to the default settings for single parts reference points.
The neighboring figure shows a gusset built out of the endplate connection of two girders and a support. Dimensioning of drill holes in the view is related to the system axis of the connected girders. Reference to edge has been selected for the cut-out in the shape. The filters of individual dimensioning permit a perfect separation of the settings also they have the parameter record in common.
Page C.2 - 118
Detailing Style
Tab Views
Group General Connect Dimensions Similar inner dimension chains which are situated close together are connected to one common dimension chain each. At System Axis
Only the distances of the axes of the outer shapes or of the constructional axes are considered as overall dimensions.
Outer Edge Steel
The meaning of the option „At System Axis‟ also refers to the reference point „View‟ of dimensioning.
Display Areas
The determined dimension areas (if local areas have been activated) are displayed in colour for control purposes. This option is only an auxiliary for the configuration of the local areas and should normally be deactivated.
Group Filter For Outside Edge Steel Here, you have the possibility to exclude certain parts from the calculation of outer dimensions to prevent it from increasing e.g. by the projection of base plates. Endplates horizontal End and base plates in horizontal direction (width) are not taken into consideration. Endplates vertical
End and base plates in vertical direction (height) are not taken into consideration.
Page C.2 - 119
Detailing Style Poly-plates horizontal Poly-plates and stiffeners in horizontal direction are not taken into consideration. Poly-plates vertical Poly-plates and stiffeners in vertical direction are not taken into consideration. Counter Type horizontal The shape type opposite to the view (i.e. at views the shapes in cross-section display and at plan view the shapes in view display) in horizontal direction is not taken into consideration. Counter Type vertical The shape type opposite to the view (i.e. at views the shapes in cross-section display and at plan view the shapes in view display) in vertical direction is not taken into consideration.
Group Dimensioning Areas Dimensioning Area Here, you determine the principle method for component part dimensioning in views. Standard – All shapes are dimensioned outside the view. Only Outside – Shapes which are situated in the defined outside area are dimensioned outside the view. All other shapes are not dimensioned. Outside and Inside – Shapes which are situated in the defined outside area are dimensioned outside the view. Shapes which are situated in the remaining inside area of the view are locally dimensioned. Outside and Area Analysis – Local inside areas of the view are automatically determined according to your defaults. Shapes which are situated in the defined outside area are dimensioned outside the view. Shapes which are situated in the determined inside areas are locally dimensioned. You can give additional information on a separate page of this parameter group. For more detailed information about inside and outside areas of a view, please refer to the general explanations of local areas in overviews. Area Sizes
Page C.2 - 120
Here, you indicate the distance from the corresponding outer edge of the view to the inside up to which a shape is still assigned to the outer area.
Detailing Style > Outer Fields
Here you enter the distances of left, right, lower and upper side individually.
> Inner Field
Here, you enter the size of the sections into which a local inner area is additionally subdivided. Each section can contain its own local dimension chains. The size is an approximate value and can be bigger or smaller in reality. If you enter the value 0, the areas are not subdivided any more. For more detailed information about inner and outer areas of a view, please refer to the general explanations concerning local areas in overviews.
Filter for Overall Dimension Normaly, ProSteel uses all shapes to determine the outer dimensions. For practice-oriented dimensioning of overviews, however, it is often reasonable to exclude certain shapes from the determination of overall dimensions. The example shows a typical form of dimensioning, when e.g. the outer dimensions are taken from drawings which are part of a quotation or which have been realized by an architect and these shall be found in the approved plans. Base Plates (1) The base plates are included into the determination in vertical direction, but excluded in horizontal direction. Counter Type (2) The wall latch-bolts are also excluded in horizontal direction. As the type of overview drawing is a view (global Zdirection visible), the cross-sections are the counter type.
Page C.2 - 121
Detailing Style
Tab Views ReferencePoints
Settings Here, you select the component parts for which you want to attach overview dimensions in the view and determine the dimension points as well as the position of dimension chains. For the essential settings on this dialog tab, please refer to the general description of defaults for dimensioning chains. List of Dimensioning Groups The following special dimensions may be added apart from the different component part groups for shapes and poly-plates, as well as a general group already described in the introduction: Special Dimensions Construction Axes
The existing construction axes (frame working area) of the view
Outer Edge Steel
Outer dimensions of steel construction related to the border axes
Diagonal Dimensions
Length and system dimensions for diagonal shapes
Manual Dimension Points
Manual dimensioning objects from the 3D model for overviews
Page C.2 - 122
Detailing Style Special Forms of Dimensioning Dimensioning of overviews differs a bit from dimensioning of groups with regard to possible reference points and position of dimension chains, especially if local areas are used. For the dimension points (target points), however, nearly the same possibilities are available as at shapes in construction groups. Reference Connection Start View
Left resp. lower side of the overall view
Start Construction Axes
Extreme left resp. lower visible construction axis
Start Area
Left resp. lower side of the corresponding local area
Edge View
Side of the overall view which is situated next
Edge Construction Axes
Outer visible construction axis which is situated next
Edge Area
Side of the corresponding local area which is situated next
Component Part
Extreme left resp. lower dimension point which is used (self reference)
Next Construction Axis
The next visible construction axis in dimensioning direction
Additional Dimensions View
Outer edges of the overall view in dimensioning direction
Construction Axes
Utmost visible construction axes in dimensioning direction
View + Construction Axes
Outer edges and utmost visible construction axes in dimensioning direction
Area
Outer edgesof the corresponding local area in dimensioning direction
Position Dimension Chains (I) (Only Inner Area) Middle
Geometrical center of the area
Middle Top / Left
A little bit above resp. left of the geometrical center of the area
Middle Bottom / Right
A little bit below resp. right of the geometrical center of the area
Half Top / Left
In the middle of the upper resp. left half of the area
Half Bottom / Right
In the middle of the lower resp. right half of the area
Top / Left
Above resp. left of the area
Bottom / Right
Below resp. right of the area
To Inside
Near area edge seen from the center of the overall view
To Outside
Far away area edge seen from the center of the overall view
Position Dimension Chains (II) Each Alignment
Dimensioning in each alignment towards the reference direction
Only if horizontal
Only dimensioning if part horizontal (parallel) towards reference direction
Only if vertical
Only dimensioning if part vertical (perpend.) towards reference direction
Only if orthogonal
Only dimensioning if part rectangular towards reference direction
Only if diagonal
Only dimensioning I fpart diagonal towards reference direction
Page C.2 - 123
Detailing Style
Area Assignment (Only Inner Area) According to Belonging
Position of dimension chains in the belonging outer or inner area
Separate Outer Area
Position of dimension chains in the outer area, separate dimension chain for inner area
Common Outer Area
Position of dimension chains in the outer area, common dimensions
In the following figure, you see a simple example for dimensioning a view including construction axes display. The first dimension chain from above shows the dimensioning of the shapes related to the construction axes, the second dimension chain shows the dimensioning of the construction axes and the third dimension chain shows the dimensioning of outer edge steel (2600). The overall dimension (3000) is measured over the outer axes. Construction axes 1 and 3 could be hidden in the settings for overviews. In this case, they wouldn‟t be dimensioned.
Page C.2 - 124
Detailing Style
Tab Views ReferencePoints AnchorDetails
Settings Here, you select the treatments for which you want to attach individual single part dimensions in the anchor details and determine the dimension points as well as the position of dimension chains. For the essential settings on this dialog tab, please refer to the general description of defaults for dimensioning chain and of defaults settings for single part reference points.
Reference to next Constructional Axis The holes of the anchor plates refer to the construction axis which is situated next.
Reference to Connecting Shape The holes refer to the center of support. The center of support itself refers to the construction axis which is situated next.
Coordinate Dimensions The coordinate dimensions refer to the absolute position in the plan view (origin of axes dimensioning).
Page C.2 - 125
Detailing Style
Tab Views AreaAnalysis
Group Analysis Shapes Analyse Type
Here, you determine how to define the final local areas from the analysis. Main Direction – Only the analysed main direction of dimensioning is used to build an area. Transversal Direction – Only the analysed transversal direction of dimensioning is used to build an area. Overlay Single – New areas are built by overlaying the areas of the analysed main and transversal direction. Overlay Groups – New areas are built by overlaying the areas of the analysed main and transversal direction. Then, bordering areas are new combined.
Min. Count
The minimum number of direction-determining shapes which must exist when comparing the length classes in one direction to decide which is the main direction of dimensioning.
Threshold (%)
The relative difference in length with regard to the longest shape of a higher class to permit building of a new lower class
Min. Length
The minimum length of the shape to be used for analysis at all
Max. Distance
The maximum distance of one shape end to the other to be connected to an imaginary continuous shape.
Max. Offset
The maximum offset of the center axes of two parallel shapes to be connected to an imaginary continuous shape.
Page C.2 - 126
Detailing Style
Group Extend/Combine Area Max. Distance to Border horizontally If the distance to the next bordering edge in analysis direction is smaller than this value, the previous area in this direction will be extended up to the new border. Max. Distance to Border vertically If the distance to the next bordering edge transversal to the current analysis direction is smaller than this value, the previous area in this direction will be extended up to the new border. Combine Max. Wide Width a section (disk) at least has to have in analysis direction to be processed as separate area. Otherwise, the previous area will be extended perpendicularly completely up to each of these borders if the width is also bigger than the value brought into line. Max. Distance for Collect Maximum distance between two areas which came into being by overlaying to be collected again to a common area. Min. Number of Border Shapes This number of direction-determining shapes of high classes has to be used at least for building the borders of the area. Otherwise, the shapes of the next lower class will be used as well. Min. Total Size
Minimum length and width of a new area by overlaying. Smaller areas are assigned to the previous neighboring area.
Method of Analysis The analysis of the local areas is made by cutting the whole view in thought in several disks. These are limited by those shapes which visually appear as continuous shapes. The resulting imaginary shape lengths are classified according to their length and – starting with the longest class – the number of direction-determining shapes is compared until a clear majority is found. This determines the cutting direction and thus (perpendicular to it) the main direction of dimensioning.
Page C.2 - 127
Detailing Style Now the possible sections are collected in analysis direction via pre-defined minimum widths. The final area size is limited by the shapes which are running transversally to the cutting direction. Finally, possibly existing bordering edges are brought into line. An overlaying permits to build new areas out of the intersection of main and transversal direction. Here, too a collection and bringing into line can be made (however only in cutting direction). Thus, empty areas (e.g. notches) are better taken into consideration. Unfortunately, there is no generally applicable solution with fixed parameters which can be used for all kinds of constructions. Therefore, it is inevitable to make some experiments with the parameters, especially in case of complexe constructions, until a favourable division is reached.
Page C.2 - 128
Detailing Style
C.2.6 Label Settings Use this dialog tab to specify if and what type of position flag or welding symbol to attach to the construction parts. In addition, you indicate how the details and views have to be labeled.
Tab PositionFlags
Group General Pos. Flags First
The position flags are attached before part dimensioning so that they are near the part.
Only 1st Part View
In case of several partial views of a detail, the position flags are only attached to the first view (except for possible 2D cuts and folded end plates).
In Sections
Position flags are also attached to all 2D-cuts.
No Cross-Sections
Position flags are not attached to component parts, which are visible as cross-sections in the view.
Plates in Views
A position flag is also attached to polyplates and stiffeners in model-views (overviews).
Alignment
Here, you select the aligment of the position flags in the detail drawing. Horizontal – all position flags are aligned horizontally. Vertical – all position flags are aligned vertically. According to style – all position flags are aligned as indicated in the distribution style.
Page C.2 - 129
Detailing Style Group Position Flags For Main Parts
A position flag is attached to the main parts of construction groups.
For Group Parts
A position flag is attached to the subparts of construction groups.
For loose Single Parts A position flag is attached to the component parts not belonging to a group. For Bolts
A position flag is attached to the bolts of a construction group.
Pos.Flag Template Here, you select the template for automatic distribution of position flags. The template controls what has to be displayed in the individual position flags, how the flag is structured and according to which criteria the distribution in the detail or in the view is effected. You create a distribution template in the positioning command and only load it here. Click on this button to move directly to the dialog tab for setting the distribution templates. You can modify the selected template or create new ones. Please note that you have to save a modified template first before the modifications become valid.
Page C.2 - 130
Detailing Style
Tab WeldingSymbols
Group General At End Plates
The welding symbols of the inserted welding joints are displayed in single parts views for base and endplates, if the connection shape is shown, too.
At Groups
The welding symbols of the inserted welding joints are displayed in group views.
Folded Plate
The welding symbols of the inserted welding joints are displayed in group views for folded end plates.
Group Welding Symbols Pos. Flag Template Here, you select the template for automatic distribution of welding symbols. The template controls what has to be displayed in the individual welding symbols, how the flag is structured and according to which criteria the distribution in the detail or in the view is effected. You create a distribution template in the positioning command and only load it here. Click on this button to move directly to the dialog tab for setting the distribution templates. You can modify the selected template or create new ones. Please note that you have to save a modified template first before the modifications become valid.
Page C.2 - 131
Detailing Style
Distribution of Welding Symbols Distribution of welding symbols takes place similar to distribution of positioning flags. Surrounding geometry is recognized in the drawing. Please refer to chapter Positioning for the corresponding meaning of the settings.
Group Sorting You will find the meaning of the different settings in the description of distributing position flags in the chapter about positioning.
Group Options Group Flags
Flags having the same content are combined to a common flag if they are situated within group distance.
> Group Distance
Distance two identical flags may have to be combined to a common flag.
> Always Guideline For each flag for which a guideline is created; otherwise only one guideline will be created altogether for the combined flags. Layer
Page C.2 - 132
Layer on which the welding symbols have to be created.
Detailing Style
Tab AdditionalText
Group Detail Description Partial View
The name of the partial view is displayed.
Scale
The detailing scale is displayed. If you have selected „Partial View‟ and „Scale‟, both are used to create an entry in the form of "Front View (M1: 10)".
> Prefix
Here, you specify which text is positioned in front of the scale (if you enter e.g. „M 1:‟, you will get „M 1:10‟).
Number
The total quantity of component parts in the model is displayed. Of course the quantity of parts is only valid after previous positioning.
> Postfix
Here, you specify which text is still added to the number (if you enter e.g. „x‟, you will get „5x‟). If you want to have an independant text for number “1”, you indicate the complete output separated by comma in front of the postfix (e.g.‟SINGLE,x‟).
Shape Description
The name of the component part or view is displayed.
Shape Length
The length of the component part is displayed.
Material
The material designation of the component part is displayed. If you have simultaneously checked „Shape Description', 'Shape Length' and „Material' , all are used to create an entry in the form of "HE 200 B...7800 RST-37-2".
Page C.2 - 133
Detailing Style Change Note
The modification status of the component part is displayed.
Position No.
The position number of the component part is displayed.
> Prefix
Here, you specify which text has to be positioned in front of the position number.
Shipping No.
The shipping number of the component part is displayed.
Remarks
Comments are displayed, which have been assigned to the part e.g. with "Change Properties".
Group Language Standard
The drawing is exclusively labeled in the original language of the program installation.
One Language
The drawing is labeled in the language chosen as „First Language‟ in the selection list.
Two Languages
The drawing is labeled in the two languages chosen as „First Language‟ and „Second Language‟ in the selection list. The two terms are displayed separately, divided by oblique stroke, e.g. "Ansicht A / view A". The selection 'Standard' as language corrsponds to the original language of the program installation.
The translation of the terms is based on a translation database with a translation 1:1. If the corresponding term is not defined there, the original language of the program installation is used instead. If there are identical terms at bi-lingual labeling, only one term will be displayed.
Group Text Sizes Normal Text
Here you enter the text size for the label.
Text Scale
Here, you enter the text sizes for the position number, view and scale text.
Text at Shape
Here, you enter the text size for the text label at shapes in overviews.
Text Style
Select the text style (script) which has to be used for displaying the text entries in the selection list.
Page C.2 - 134
Detailing Style
Tab AdditionalTexts Views
Group Construction Axis Display Axis
The axes descriptions of the work frames perpendicular towards the current view are displayed. Text sizes and display form are adopted from the work frame properties.
> With Axis Lines
The actual axis is also displayed as 2D-line in the corresponding view.
> Only Inner Axes
Only those axes are displayed which are situated within the determined overall dimensions of the view including a snap range.
Length (%)
Here, you enter the relative length of the axis line (in %) related to the overall dimensions. Normally, the axis line is running towards the outer edges of the display (= 100%). If you enter a value bigger than 100, the line will be extended over these edges. If you enter a value between 1 and 100, the line will only partly be displayed from the bottom resp. from the left, e.g. to hint only at it in views.
Text Distance
Here, you enter the distance of axes label towards the last outer dimension chain.
Axis Display
Here, you enter a snap range up to which the axes situated outside the overall dimensions are still displayed.
Page C.2 - 135
Detailing Style Group Shape Label Display Labels
Component part name and material are written to the corresponding shape at overviews.
> Also End Plates
Base and end plates are labeled as well.
> Also Flats
Shapes out of flat steel are labeled as well.
> Also Cross-Sections Shapes which are seen as cross-sections are labeled as well. > Distance from Plane The relative position of the upper edge or front edge of the shape is added to the corresponding view plane unless being situated at the same level. Default Text
Here you can indicate an additional text for the elevation. The variable $(E) will be replaced by the current measured value. The text O.K.=$(E) will then e.g. be displayed as O.K.=+50.
Dialog-Commands FILTER By clicking on this button, you can define a filter of your own from other parts properties apart from the previously defined filters of the group Shape Labeling. Then, a dialog opens for entering the filter condition. The filter settings are identical with the filter for selection of parts to be displayed in overviews. Please refer to this chapter for description (see also: 2DDisplay/Views).
Display of Relative Elevation Shape labels can only be attached if the variant „Sketch‟ or „System Lines‟ has been selected as display mode of the overview. The determined text is then entered in the shape properties ‟Note 2‟ of the displayed component part, unless the corresponding part in the model has a separate entry there. Otherwise, the entry is taken from the component part in the model and the variable $(E) possibly existing there will be replaced. You can define the label for each component part individually. If a text was neither indicated in the shape nor in the detailing style, only the measured value will be added.
Page C.2 - 136
Detailing Style
C.2.7 Settings for ‘ProConcrete 3D’ Parts In these dialog tabs, you specify the display of concrete elements which possibly exist in the drawing and which have been created by means of the application „ProConcrete 3D‟. For more detailed information about the display parameters, please refer to the ProConcrete 3D documentation, if need be. ProConcrete 3D is an application of the 3D-CAD product family of Bentley Systems, which is completely drawing compatible to ProSteel. The main stress is put on the creation and processing of component parts made of reinforced concrete including the necessary reinforcement. If you are interested in this product, please contact your agent who will be glad to give you all further information.
Page C.2 - 137
Detailing Style
Example – Detailing of a Single Part The picture below displays the example of detailing a single part with optimized settings. The example is based on the following main settings: Front and plan view are processed in one detail. The parallel holes are created with the „Separate Hole Tracks‟ option. The „Separated Hole Tracks‟ option is activated. The „Shape Shortening with Zigzag Double-Line‟ option is activated. The „Combine Same Dimensions‟ option is activated; min. = 3. Length and width were specified with the variant „Auto Larger (x1.4)‟. The effects of the settings can be seen in this detail; no further revisions were required
Page C.2 - 138
DetailCenter Express
C.3
DetailCenter Express
The DetailCenter-Express! is an extension of the DetailCenter to carry out recurring detailing tasks as fast as possible. In the actual DetailCenter, you can make exact detailing settings and you can decide for each component part separately whether and how it has to be detailed and placed on drawings. On the other hand, the DetailCenter Express! works off the complete detailing according to a pre-set pattern. Start such a detailing pattern with the preparation of the model for detailing and complete it with clearance work functions after insertion of the 2D-details in the workshop plans. You can define the patterns for different tasks by means of templates and then carry out the detailing with a single mouse click. As you perhaps know already from the installation assistants of this and other programs, the DetailCenter Express! will guide you through the necessary settings for the detailing pattern. You only can start detailing after having made all necessary settings. For this purpose, the dialog offers you different pages one after the other which can vary depending on your default settings. In this manual, we can therefore only describe any possible pages in the order of their being displayed. It can, also be that one or more pages don‟t exist due to your default settings.
Page C.3 - 1
DetailCenter Express
C.3.1 Running DetailCenter Express The model has to be saved under a valid drawing name first to be able to work with the DetailCenter Express! Now click on the EXPRESS button in the component parts list of the DetailCenter or select the context menu. Here, you click on the entry DetailCenter Express! And the following dialog opens:
Click on this button to display the previous page.
Click on this button to display the following page. Click on this button to start detailing. Detailing will be worked off according to your current settings. In the selection pages, you can watch in a display what is in process at the very moment. It is true that you can work with AutoCAD or other applications during detailing process, depending on the computing capacity of your hardware. We recommend, refraining from this! After the DetailCenter Express! has completed its work, you are informed about it in an info box.
Page C.3 - 2
DetailCenter Express
C.3.2 Selection Pages In the following, you will find a description of the different possible selection pages. The pages are displayed in the main dialog box after having been selected with the buttons MORE and BACK. Each following page depends on your previous settings. If the previous settings are modified, you can ignore already filled in pages again. Nevertheless, the program will remember the specifications for later activation. Click on the PROCEED button with the mouse and you can start the process at any time you like, if your specifications are complete.
Starting Page This page is always displayed first. Here, you will set which tasks have to be done for you by the DetailCenter Express!
Prepare
Here, you specify which corrections have to be made first before style assignments and detailing will be started.
Single Parts
Here, you can connect loose single parts and group parts with detail styles.
Groups
Here, you can connect standard groups and subgroups with detail styles.
Assemblies
Here, you can connect assemblies with detail styles.
Views
Here, you can connect views of work fields as well as plan and top views and anchor plans with detail styles.
Page C.3 - 3
DetailCenter Express
Detailing
Here, you can have the parts detailed as detail blocks.
Single Sheet
Here, you can insert detailed detail blocks into workshop plans or activate the single sheet drawing output of details. If single sheet drawing has been selected, the parts will be detailed in any case. Detailing therefore has not to be activated extra.
Clean Up
Here, you can set which corrections still have to be made after end of detailing.
To give you an example: If you want to put out all stiffeners and plates as well as the groups as DIN A-4 single sheet drawings, independent of already existing style assignments, select the following entries on the starting page: Prepare Detailing (to delete former assignments), Connect Single Parts with Detail Style, Connect Groups with Detail Style and Insert Detail Blocks/Single Sheet Drawings. There you will make the further settings. Please note that the DetailCenter Express! always works off the complete component parts list. The list is worked on as if you had transferred the complete model for detailing.
Prepare Detailing On this page, you will set which tasks have to be done before starting all further steps.
Page C.3 - 4
DetailCenter Express
Cancel Write Protection Any existing markings are cancelled. Thus you can be sure that all component parts will be seized by the following actions, if desired. Delete
All detail styles, which have already been assigned before, will be separated from the parts. Thus you can be sure that a detail style will be assigned only to the component parts selected in the DetailCenter Express!.
Reset
All modify flags set by the program will be reset to initialize the model.
Delete links
All pointers referring to detailed or inserted detail blocks entered in the model drawing will be deleted.
Delete Blocks
Former detail blocks in the detail library of the model will be deleted.
If all fields on this page have been checked, your model drawing will be completely initialized. It is the same as if a detailing never took place before. Depending on the time of application of the DetailCenter Express! it is, however, also reasonable to exclude some points.
Page C.3 - 5
DetailCenter Express
Detail Style for Single Parts On this page, you make the default settings, which single parts have to be connected with which detail styles. Both group parts and parts without group are treated here. The same defaults are valid for automatic connections and for the manual connections in the component parts list of the DetailCenter.
Upper List
Here, you choose the desired detail style to assign to the corresponding component part type. The parts can of course only be recognized as such if they were created, with the corresponding ProSteel functions.
Left List
Here, you select the component part type you want to assign a detail style to.
Right List
Here, you see the current assignments. These can be removed again or modified. Click on this button to assign the detail style displayed in the selection list to the component part selected in the left or right list. Click on this button to cancel the assignment of the component part type checked in the right list.
At style selection, you can differentiate between the detail styles currently existing in the model drawing and the detail styles saved on the hard drive. If you select a detail style from the hard drive (marked with a [HD:] put first, e.g. [HD:] plates), it will be automatically loaded and it will replace the style possibly existing in the drawing.
Page C.3 - 6
DetailCenter Express
Detail Style for Groups On this page, you make the default settings, which groups have to be connected with which detail styles. Only the groups as such are used for assignment, but not the corresponding single parts (non-recursive connection). The same defaults are valid for automatic connections and for the manual connections in the component parts list of the DetailCenter.
Upper List
Here, you choose the desired detail style to assign to the corresponding group type of standard groups. The type depends on the main part of the group; for subgroups, however, only a common detail style can be used.
As the assignment of detail styles corresponds to that for single parts, please refer to “Detail Style for Single Parts” for more detailed information.
Page C.3 - 7
DetailCenter Express
Detail Styles for Assemblies On this page, you make the default settings, which assemblies and connecting gussets have to be connected with which detail styles. Only the assembly as such is used for assignment, but not the corresponding single parts (nonrecursive connection). The same defaults are valid for automatic connections and for the manual connections in the component parts list of the DetailCenter.
Upper List
Here, you choose the desired detail style to assign to all assemblies and connecting gussets existing in the model.
As the assignment of detail styles corresponds to that for single parts, please refer to “Detail Style for Single Parts” for more detailed information.
Page C.3 - 8
DetailCenter Express
Detail Style for Views On this page, you make the default settings, which views on the model have to be connected with which detail styles. The same defaults are valid for automatic connections and for the manual connections in the component parts list of the DetailCenter.
Upper List
Here, you choose the desired detail style to assign to the corresponding view.
As the assignment of detail styles corresponds to that for single parts, please refer to “Detail Style for Single Parts” for more detailed information.
Page C.3 - 9
DetailCenter Express
Detail Styles Additional Tasks On this page you make further settings, which have to be valid for the connection with detail styles for single parts, groups and overviews.
Part Family Single Part At the connection of single parts, the program first uses the style of a part family assigned to this part. If there isn‟t any part family assigned, or if this part family hasn‟t a detail style of its own, the standard assignment will be used. Part Family Group At the connection of groups and subgroups, the program first uses the style of a part family assigned to this group. If there isn‟t any part family assigned, or if this part family hasn‟t a detail style of its own, the standard assignment will be used. Assignment
Page C.3 - 10
An already existing style assignment of the part will not be overwritten. A detail style is only assigned to parts without any detail style.
DetailCenter Express
Detailing On this page, you make the default settings, how the component parts have to be detailed. If you choose the automatic single sheet output, you don‟t have to make any additional settings here.
Position once
Only one detail block is created of each position number, divided into single parts and groups.
Overwrite
Detail blocks of the same part existing in the detail library are overwritten.
Left List
Here, you select which component parts or component part groups are to be detailed, if a detail style has been assigned to them. This can be the complete detail or even only some components of a detail..
Component Parts Selection The following details or components of a detail can be individually selected or dropped: Overviews Assemblies ...main groups ...subgroups ...single parts Groups ...main parts ...build. components ...subgroups Other single parts Connecting gusset
model views, horizontal projection, anchorage plan etc. as overview drawing complete assembly as assembly drawing groups in assemblies as group drawing subgroups in assemblies as group drawing single parts in assemblies as single part drawing complete group or loose subgroup as group drawing main parts in groups or in loose subgroups as single part drawing building components in groups or in loose subgroups as single part drawing subgroups in groups as group drawing loose single parts not belonging to a group as single part drawing connecting gusset as gusset detail
Page C.3 - 11
DetailCenter Express
Insert Details On this page, you make the default settings, how the worked out detail blocks have to be inserted into the drawing. In addition to the actual insertion task, the DetailCenter Express! also permits to fill in the frame field of the drawing frame as well as to create a parts list. You can select the drawing frame etc. on the following pages.
Single Sheet
A drawing will be created for each single detail block.
> Scale
At single sheet output, the existing detail scale is adopted to the drawing sheet (the default setting of the detail style is ignored).
> Sheet Size
At single sheet output, a suitable drawing frame is searched for the existing detail block.
Arrange
several details are automatically arranged on a drawing sheet according to your default settings.
Title Block
The title block of the drawing frame is filled with the corresponding specifications.
Belonging to
on the drawing frame, a list is created displaying the information about belonging of the parts (e.g. in which groups a certain single part is contained).
Parts List
A parts list of the displayed details is created on the drawing frame (parts list related to the drawing).
US Mark Number At insertion, the US mark number is directly created according to the current setting in the DetailCenter.
Page C.3 - 12
DetailCenter Express
Single Sheet Output At single sheet output, a separate drawing sheet is used for each created detail block. You can define different guidelines for detailing and sheet selection and each drawing sheet can contain its own parts list and containment list. For more detailed information about single sheet output of ProSteel, please refer to the chapter 'Automatic Single Sheet Output further on in this manual.‟
Multi Sheet Output Apart from single sheet output, it is also possible to arrange several finished detail blocks on a multi sheet drawing. The program tries to place as much details as possible according to determined guidelines. Generally, the sheet is created with a scale 1:1 and the component parts are inserted in a scaled way – the functions for parts list and containment list are not available. For more detailed information about multi sheet output of ProSteel, please refer to the chapter 'InsertExpress‟ further on in this manual. As the DetailCenter Express only offers a part of the possibilities of multi sheet output, the (often identical) dialog parameters will be described in detail in this chapter, too.
Page C.3 - 13
DetailCenter Express
Single Sheet Output ... Insertion Options When you have selected the automatic single sheet output, the following dialog will be displayed where you indicate which kinds of component parts have to be detailed and stored as single sheet drawing.
Left List
Here, you select which component parts or component part groups are to be detailed and inserted, if a detail style has been assigned to them. This can be the complete detail or even only some components of a detail.
The following details or components of a detail can be individually selected or dropped: Overviews Assemblies ...main groups ...subgroups ...single parts Groups ...main parts ...build. components ...subgroups Other single parts Connecting gusset
model views, horizontal projection, anchorage plan etc. as overview drawing complete assembly as assembly drawing groups in assemblies as group drawing subgroups in assemblies as group drawing single parts in assemblies as single part drawing complete group or loose subgroup as group drawing main parts in groups or in loose subgroups as single part drawing building components in groups or in loose subgroups as single part drawing subgroups in groups as group drawing loose single parts not belonging to a group as single part drawing connecting gusset as gusset detail
For more detailed information about the drawing frames and how to prepare them for the output of title block and parts lists, please refer to the chapter „Automatic Single Sheet Output‟ further on in this manual.
Page C.3 - 14
DetailCenter Express
Multi Sheet Output ... Insertion Options When you have selected the multi sheet output, the following dialog will be displayed where you can indicate the guidelines for the automatic arrangement of the detail blocks to be inserted.
In Assemblies
All detail blocks belonging to an assembly are inserted in one or several sheets.
In Groups
All detail blocks belonging to a group or subgroup are inserted on one or more sheets.
Ascending
The created detail blocks are sorted ascending by their position number and then inserted into the drawing.
Separated
Single parts, group details and overviews are inserted separately on different drawings.
Page C.3 - 15
DetailCenter Express
Multi Sheet Output ... Optimize Insertion The actual arrangement of detail blocks on the multi sheet can now still be commanded via the following parameters.
Arrangement
The detail blocks are inserted in lines or in columns into the drawing.
Failed Insertion
Maximum number of failed insertions before the output is continued on the next page. 0 means that, if a detail block doesn‟t fit on the sheet, the detail block is immediately inserted on a new sheet.
Increment X
Grating for the insertion algorithm in X-direction; the bigger the selected value, the faster the dispatch is carried out.
Increment Y
Grating for the insertion algorithm in Y-direction
Distance
Minimum distance of one detail block to the other
Page C.3 - 16
DetailCenter Express
Insert Details ... Common On this page, you make the further default settings for the automatic single or multi sheet output. Depending on the selected insertion type, you don‟t have access to certain fields because they have no meaning then.
No Scale
The component parts are displayed without scale. The settings in the detail style are ignored.
Different Frames
You can specify different drawing frames for groups and polyplates.
Alternative Frames
You can specify another frame for details in upright format.
Scale File
Here you see the file on which the valid drawing scales are based if you have selected the option „Optimized Scale‟ at single sheet output. .
Sheet Pattern File
Here you see the file on which the valid drawing frame definitions are based.
Mark Number File
Here you see the file on which the valid definitions for US mark numbering are based if you have selected the option „Use US Mark Numbering‟.
Output Path
Here you see the directory where the finished workshop drawings are stored.
You may modify the files and paths of the templates by clicking on the small button on the right beside the corresponding display.
Page C.3 - 17
DetailCenter Express
Insert Details ... Drawing Frames On this page, you select the desired drawing frame(s) for the single or multi sheet output.
Selection Lists
Page C.3 - 18
Here, you choose the desired frame type for the output. Only the borders defined in the sheet pattern file will be displayed. It is always the set standard frame which will be used under „Drawing Frame‟ unless there is an exception for the corresponding detail at single sheet output. At multi sheet output, you principally can only specify one drawing frame.
DetailCenter Express
Fill Title Block ... Drawing Number On this page, you make the default settings for filling in the frame field including the generation of a drawing number. You can also pre-set under which file name the completed workshop plans have to be stored.
Model Data
The order data for the frame field are transferred from the drawing information table of the models. Otherwise, another page will be displayed where you can specify the most important order data.
Store Drawing Number The file name of the workshop drawing is identical with the drawing number in the frame field. Otherwise, the current position number is used at single sheet output or a describing name at compilations. Drawing Count
Here, you enter the page number for the drawing which has to be created next.
User Variable
Here, you can enter any text you like which will be entered into your drawing number, depending on whether you make use of the corresponding variable or not.
Drawing Number Here, you can indicate another definition of the number if you temporarily want to modify the default of your sheet pattern file.
Page C.3 - 19
DetailCenter Express
Drawing Name
Here, you can indicate another definition of the drawing name, if you temporarily want to modify the default of your sheet pattern file.
Template
Here, the current definition of the drawing number of the sheet pattern file is displayed for your information.
Sheet Number
Here, you see the current continuous number for your information.
The variables at drawing number and drawing name permit you a mixed structure of fixed and current values. Please refer to the chapter 'Automatic Single Sheet Output' for a description of the templates for drawing number and drawing name and the used variables.
Page C.3 - 20
DetailCenter Express
Fill Title Block ... Data Entries On this page, you enter the order data for the fill header. 'Adopt Model Data‟ option has to be deactivated. When some data have been entered in a field, the corresponding input in the drawing information – if existing – will be overwritten. If it is a blank field, the specification of the drawing information will be used.
Input Fields
Here, you can enter the desired data. Then, they are inserted into the frame field.
Page C.3 - 21
DetailCenter Express
Clean Up Detailing On this page, you make the default settings, which tasks have to be done after end of detailing or style assignment.
Remove
All detail styles, which are not connected with a detail, will be removed from the model drawing. Copies on the hard drive are saved.
Delete views
Entries existing of manual assignments in the view list of DetailCenter will be deleted.
Detail Blocks
All inserted detail blocks existing in the detail library will be deleted. If this field is not activated, the detail blocks e.g. of the single sheet output can still be used for other purposes.
Save
The model drawing is saved after completion of the DetailCenter Express! Otherwise, you have to save it manually to avoid that the information about the worked out and inserted details will be lost.
Page C.3 - 22
DetailCenter Express
C.3.3 Single Sheet Output The automatic single sheet output permits to create an individual drawing for each detail to obtain e.g. a handy compilation of all bracing plates on DIN A-4 sheets or a compilation of documents. Two variants are offered which have only one difference in procedure. The first variant is the optimized scale. Here, the program decreases scale until the detail is completely displayed in the selected drawing border. Scale setting of detail style is ignored and a file with the available scales is used instead. This avoids use of scales which are not based on practical work or which are not customary in the corresponding workshop. The second variant is the optimized size. Here, the component part is worked out as usual with the scale of the corresponding detail style. Then, the smallest drawing frame will be specified where this part can be completely displayed. If the optimization cannot be carried out due to unfavourable defaults (e.g. a 1:10 scale overview on a DIN A-4 sheet), the best possible variant will be carried out nevertheless and the program hints to the fact that the detail doesn‟t match completely.
Scale File If you selected the Optimized Scale option, the scale selection of the program is based on the entries in the scale file. You can thus create specific files for different customers and be sure that no other scales will be used at the output. In the DetailCenter Express! you can create specific defaults with different files for your customers. The file is a text file having the extension .scl, which can also contain some comments marked with a semicolon at the beginning of the line. The default file is in the subordinate folder of your ProSteel installation.
Page C.3 - 23
DetailCenter Express
Structure of a Scale File The desired scales are entered per line one after the other, a special order is not required. ; ProSteel - Scale Definition File ; -------------------------------------------------------; Customer: Messrs. XYZ, Hamburg 1:2.5 1:5 1:10 1:20 1:50 1:100
Sheet Template File If you select the drawing borders of the selection pages or the Optimized Size option, this selection is based on the entries in the sheet pattern file. You can create specific drawing borders and insertion definitions for different customers and be sure that no other frames will be used at the output. In the DetailCenter Express! you can create specific defaults with different files for your customers. The file is a text file having the extension .frm, which can also contain some comments marked with a semicolon at the beginning of the line. The default file is pro_st3d.frm in the subordinate folder of your ProSteel installation.
Structure of a Sheet Template File The file is divided into the areas header, frame field attributes and the actual frame definitions. All entries consist of a group name in pointed brackets and the data group of keyword, equals sign and the following data. [GROUP NAME] Keyword1=Data1 Keyword2=Data2 ...
You needn‟t fill in entries, which are not required, or the complete entry can be omitted.
Page C.3 - 24
DetailCenter Express 1) Header Area, Group Name [HEADER] You enter a short name under the keyword Name (for later program options) and a short file description under the keyword Description. The description will then be displayed in the selection page of the DetailCenter Express! 2) Frame Field Attributes, Group Name [TITLEBLOCK] Here, you specify which current program data will be transferred into which block attribute of the frame field at running time. You can thus even specify your own defined frame fields with your own attributes. For more detailed information about how to assign block attributes to blocks, please refer to your AutoCADdocumentation. You can assign block attributes to the following keywords. Depending on the settings in the DetailCenter Express! these are filled with the current values (Express) or with the drawing information of the model drawing. In addition, you can connect some of the properties of the corresponding detail with block attributes. This allows you e.g. to refrain from a position flag or detail labelling at single parts and thus to obtain more space for display. FileName Customer ProjectName ProjectNumber JobName JobNumber DrawingName DrawingNumber DrawingPage DrawingIndex DrawingScale DoneBy Date CheckedBy CheckedDate ClearedBy ClearedDate Specification 1-4 Note 1–4 DetailPosNumber DetailShipNumber DetailName DetailMaterial DetailLength DetailWeight DetailCount DetailNote DetailFamilyClass
complete path of the created 2D-drawing (Express). client (Express). project name of the model project number of the model order (Express) or order name of the model. order number (Express) or number of order number of the model. component part description with position number (Express) or drawing name of the model. drawing number (Express) or drawing number of the model. sheet number (Express). drawing index (Express) or drawing index of the model. scale (Express). 'done by' (Express) or 'signed by' of the model. 'done on' (Express) or 'signed on' of the model. 'checked by' of the model. 'checked on' of the model. 'cleared by' of the model. 'cleared on' of the model. 'LV Pos 1' etc. of the model. 'comment 1' etc. of the model position number of the detail shipping number of the detail designation of the detail material designation of the detail length of the detail total weight of the detail total number of the detail note field 1 and 2 of the detail component part family name of the detail
Page C.3 - 25
DetailCenter Express 3) Drawing Number Definition, Group Name [DRAWINGNUMBER] Here, you define according to which pattern the drawing number and the file name of the drawing have to be structured. You can mix fixed and variable parts and build the designations of variables as you like, (in order to avoid e.g. identical names with used terms). In the first two entries „Drawing Number Template‟ and „Filename Template‟ you indicate the definition, consisting of fixed values and the variable symbols which are mentioned in the following. You may use your own template for the file name if your drawing number has to contain signs, which mustn‟t be used in a Windows-file name. If you don‟t fill in the field 'Filename Template', the specified drawing number will be used instead as file name. Drawing Name Template DrawingNumberTemplate FileNameTemplate ProjectNumberSymbol JobNumberSymbol DrawingNumberSymbol DrawingPageSymbol DrawingIndexSymbol DwgNumberCodeSymbol PositionNumberSymbol GroupPositionNumberSymbol ObjectNameSymbol ObjectTypeSymbol YearSymbol MonthSymbol DaySymbol DrawingTypeSymbol UserVarSymbol DefaultObjectType ColumnObjectType BeamObjectType StiffenerObjectType WebAngleObjectType StandardPlateObjectType ConnectionPlateObjectType BasePlateObjectType MainPartDrawingType SubPartDrawingType GroupDrawingType SinglePartDrawingType OverviewDrawingType
Page C.3 - 26
definition for the drawing name definition for the drawing number definition for the file name variable for the project number variable for the order number variable for the drawing number of drawing information variable for the continuous sheet number variable for the modification index variable for the frame code of the frame definitions variable for the position number of the detail variable for the position number of the parent group variable for the component part name variable for the component part type variable for the current year variable for the current month (numeric, 1-12) variable for the current day (numeric, 1-31) variable for the drawing-type variable for the free text from the fill frame field dialog text for component part type, Others except the following types text for component part type, Support text for component part type, Horizontal support text for component part type, Stiffener text for component part type, Web angle text for component part type, Poly-plate text for component part type, Head-plate text for component part type, Base plate text for drawing type, single part drawing for main part of group text for drawing type, single part drawing for sub part of group text for drawing type, group drawing text for drawing type, single part drawing without group text for drawing type, overview drawing
DetailCenter Express
If you want e.g. to obtain a drawing number containing your company‟s name "ABC", the year, the drawing type "BG" for groups or "ET" for single parts as well as the position number (each one separated by points, such as e.g. ABC.2002.BG1000), you have to define the following fields. All other fields don‟t have to be filled in. DrawingNumberTemplate=ABC.#J#.#DWG##POS# FileNameTemplate=ABC.#J#-#DWG##POS# PositionNumberSymbol=#POS# YearSymbol=#J# DrawingTypeSymbol=#DWG# MainPartDrawingType=ET SubPartDrawingType=ET GroupDrawingType=BG SinglePartDrawingType=ET
...(additionally because of the points)
As already mentioned before, you can define the designations of the variables, as you like. Of course it is recommended to use special symbols there, too for better identification or in order to avoid a wrong replacing of text. (#POS# instead of only POS). 4) Frame Definitions, Group Name [NAME1], [NAME2] etc. Here, you enter which drawing frames are used and specify the insertion areas of details and parts lists. Each available frame obtains an own group. The group names then will be displayed in the selection lists of the DetailCenter Express! . Please note: The keywords „Path‟, „SizeX‟, „SizeY‟, „Area1‟ and Area2 have to be assigned with current values; otherwise the frame will not be accepted for selection. Path
complete path of drawing frame; If you enter a file name without path, the file will be expected in the subordinate folder of ProSteel SizeX the dimensions of the drawing frame in X-direction SizeY the dimensions of the drawing frame in Y-direction Area1 the insertion area of details as 2D-points; specify the lower left and the upper right corner of the area in the format (x1,y1)-(x2,y2) Area2 the area of the title block of the drawing as 2D-points ExcludeArea1 exclusion area as 2D-points where no detail block can be inserted ExcludeArea2 exclusion area as 2D-points where no detail block can be inserted ExcludeArea3 exclusion area as 2D-points where no detail block can be inserted ExcludeArea4 exclusion area as 2D-points where no detail block can be inserted Later, the exclusion areas can e.g. be used for the insertion of parts lists. DwgNumberCode The code of the drawing frame; this code can be adopted into the drawing number
Page C.3 - 27
DetailCenter Express
The following entries describe the position of the parts list ListStyle ListScale ListInsertPoint
the name of parts list definition for the drawing parts list scale of the drawing parts list insertion point for the drawing parts list as 2D-point; enter this point in the format (x, y). ListHorizontalStart description of the position of the parts list‟s insertion point in horizontal direction; Enter left for left or right for right. ListVerticalStart description of the position of the parts list‟s insertion point in vertical direction; Enter top for top or down for down. The two entries describe the position of the point related to the list (on the left at the top, etc.). The list is extended according to this default. ListType type of drawing parts list (allowed values: group, single, released) ListGroupCount the number of groups is used in the parts list ListGroupMultiplayCount the number of pieces is multiplied with the number of groups
The following entries describe the position of the containment list ContainmentListStyle ContainmentListScale ContainmentListInsertPoint ContainmentListHorizontalStart ContainmentListVerticalStart
the name of the definition for the containment list scale of the containment list insertion point of the containment list as 2D-point horizontal alignment of the containment list (left, right) vertical alignment of the containment list (top, down)
If you define your own frames, please note that the lower left point of the drawing frame has the world coordinates (0, 0) and that you store the drawing in top view on the frame. The positive X-axis is showing to the right, the positive Y-axis to the top. Enter the frame field as a block with the name of the drawing file (i.e. as block 'dina4', if the drawing frame has to be saved as 'dina4.dwg'.
Page C.3 - 28
DetailCenter Express
Insertion Areas of a Sheet Template File The following example once again shows you the most important specifications of a frame definition:
The parameters used for multi sheet output are described in chapter InsertExpress.
Page C.3 - 29
DetailCenter Express
Drawing List At single sheet output, a drawing list is automatically created as text file (*.txt) and as DBASE-file (*.dbf). The file is saved in the ProSteel detail folder under the drawing name of the model. You can see the position of the corresponding part and the file name of the created drawing in this file. The drawing number, scale (and whether it is suitable) and drawing frame are displayed as well. The data depend on the selected type of single sheet output. DetailCenter Express! drawing list ---------------------------------Output date: 13.09.2007 Output path: d:\ps18.0\detail Output mode: Best scale Job number: Model drawing: e:\dwg\halle.dwg 1.) created group drawings Pos |Scale |Max |Dwg-Number |Dwg-File ====|======|====|=============|========== 100 |1:50 |Max |DWG-A3-Bl.7 |BG100.dwg 101 |1:50 |Max |DWG-A3-Bl.23 |BG101.dwg 103 |1:15 | |DWG-A3-Bl.20 |BG103.dwg 104 |1:10 | |DWG-A3-Bl.4 |BG104.dwg 105 |1:15 | |DWG-A3-Bl.18 |BG105.dwg 2.) created single part drawings Pos |Scale |Max |Dwg-Number |Dwg-File ====|======|====|=============|========== 1 |1:50 |Max |DWG-A4-Bl.6 |Pos1.dwg 2 |1:50 |Max |DWG-A4-Bl.22 |Pos2.dwg 5 |1:10 | |DWG-A4-Bl.3 |Pos5.dwg 6 |1:50 |Max |DWG-A4-Bl.17 |Pos6.dwg 7 |1:5 | |DWG-A4-Bl.16 |Pos7.dwg 8 |1:10 | |DWG-A4-Bl.14 |Pos8.dwg 12 |1:10 | |DWG-A4-Bl.8 |Pos12.dwg 14 |1:5 | |DWG-A4-Bl.1 |Pos14.dwg 15 |1:2.5 | |DWG-A4-Bl.21 |Pos15.dwg 16 |1:2.5 | |DWG-A4-Bl.2 |Pos16.dwg
Page C.3 - 30
InsertExpress
C.4
InsertExpress
InsertExpress is an extension of the DetailCenter allowing carrying out the permanently returning tasks of insertion and distribution of detail blocks on one or several drawing sheets as fast as possible. In DetailCenter Express you can carry out a complete detailing starting with definition and assignment of a detail style up to single part drawing, whereas InsertExpress helps you with the insertion of already created detail blocks. You can save the created insertion patterns as templates and use them again later in individual or batch insertion mode. With the help of the templates, you can define the pattern for different tasks and then carry out detailing with a single mouse click. As you perhaps already know from DetailCenter Express, InsertExpress is guiding you through the necessary settings for an automated insertion pattern. You cannot start the insertion until all necessary settings have been made. For this purpose, the dialog offers you various pages one after the other which may differ depending on your pre-settings. In this manual, we can only describe all possible pages in the order of their appearance, it may be that one or more pages don‟t exist according to your pre-settings.
Page C.4 - 1
InsertExpress
C.4.1 Start InsertExpress To be able to work with InsertExpress, you must already have created some detail blocks from a model in ProSteel. Move to the insertion page in the DetailCenter and select an existing detail block library there to start InsertExpress. It is not before a detail block library has been selected that the button calling InsertExpress will be released. When InsertExpress is started, the following dialog appears.
Click on this button to show the previous page. Click on this button to show the next possible page. Click on this button to start detailing which then will run according to your current settings. In the area of selection pages a display appears allowing you to observe the currently running process.
Page C.4 - 2
InsertExpress On this starting page, you select in the selection list whether you want to use InsertExpress in manual or batch insertion mode. In Manual Insertion Mode, you can define a specific insertion process that will then be carried out. You can save the settings of this manual insertion as template and use it again later in manual or batch insertion mode. In Batch Insertion Mode, you can select one or more templates that will then be carried out one after the other in InsertExpress. You will find a more detailed description of the different operation modes in the following chapters. Below, you can see a typical batch page with several automatically inserted details:
Save Templates You can save all settings for insertion – like in most ProSteel functions – under a file name in the templates management of InsertExpress so that you can use them again later.
Page C.4 - 3
InsertExpress
C.4.2 Manual Insertion Mode In manual insertion mode, a single insertion of several detail blocks is carried out. In the following dialog box, you specify which detail blocks of the previously selected detail library have to be inserted.
Library
All detail blocks saved under the selected library are inserted.
Selection
All detail blocks checked in the browser have to be inserted.
Browser
All detail blocks displayed in the browser are inserted.
Filter
In the following field, you can define a list of search filters that are used for searching in the selected detail library. The found detail blocks are inserted later.
Note: To be able to use the option “Takeover Selection from Browser“, you have to select the detail blocks to be inserted before starting the InsertExpress. You should pay attention to the status of the “Recursive” button on the insertion page in the DetailCenter.
Page C.4 - 4
InsertExpress
Selection with Filter When you have selected the option “Use Filter Conditions from the Library”, you can collect different filters that you already know for the display of DetailCenter, in a list. These filters are logically linked with OR, i. e. all detail blocks corresponding to one of these filters are taken over for selection.
Right Arrow
Click on this button to transfer the selected entry in the left list to the right filter list.
Left Arrow
Click on this button to remove the selected entry in the right list.
Click Twice
Click on a list entry to process the selected filter condition.
Page C.4 - 5
InsertExpress
Define Filter You can define the filters and store them as template on the insertion sheet in the display options of the DetailCenter. A possible filter selection may look as follows to filter out all straight shapes type HE.
Then the filter can be saved under a certain name (e.g. HE-shapes) using the template management. This name will be found later in the above-displayed filter selection.
Page C.4 - 6
InsertExpress
Insertion Options After having defined which detail blocks have to be inserted, the next step is to specify what has to be done in the drawing when the blocks are inserted.
Title Block
The title block on each drawing sheet has to be filled out according to the specifications which still have to be made in the following.
US Mark Number An US mark number is generated for each detail block which later will be entered automatically as shipping number in the model drawing.
Page C.4 - 7
InsertExpress
Sorting of Detail Blocks In the following dialog, the dispatch and the sorting of the selected detail blocks are specified.
Dispatch in Assemblies A set of drawings is generated for each assembly. Detail blocks not assigned to an assembly are not inserted. Dispatch in Groups A set of drawings is generated for each group. Detail blocks not assigned to a group are not inserted. Ascending
All selected detail blocks are inserted ascending by their position number.
Separated
Detail blocks are inserted one after the other separately. At first, all single parts are inserted, then all groups (without their single part drawings) and finally the overview drawings. These are inserted ascending by their position number.
When you have selected the option “Insert Separated by Single, Group, View”, the following options are available in addition as well.
Page C.4 - 8
InsertExpress Single Parts
The single parts are inserted separated from each other and ascending by their position number in the following order: - Shapes - Poly-plates - End and Base Plates - Stiffeners - Bent Shapes - Other Component Parts
Groups
Here, the group details are dispatched on different drawings, separated according to type: - Supports - Cross Girders - Other Standard Shapes - Bent Shapes - Other Groups
Views
The views are dispatched as follows: - Working Areas - Ground Plan - Plan View - Anchorage Plan
At first, all above-mentioned part types are collected per type and then inserted one after the other in ascending order each on a separate drawing sheet (or more, if necessary).
Page C.4 - 9
InsertExpress
Arrangement of Detail Blocks After having specified in which order the detail blocks have to be inserted, you can define here the alignment of the detail blocks on the drawing and how good the drawing blocks are arranged in the drawing.
Failed Insertion
If this number of detail blocks couldn‟t be inserted into the current drawing, a new drawing will be started.
Increment X
Grating distance for the insertion grating in x-direction
Increment Y
Grating distance for the insertion grating in y-direction
Distance
Minimum distance of the detail blocks after insertion
Arrangement
The detail blocks are inserted in columns or in lines.
Note: The parameters specified here control the output accuracy; they can however also have a considerable influence on the time needed for the insertion process. Failed Insertion At a failed insertion, the detail block is inserted outside the drawing on the coordinate (–5000, -5000). The rest of the drawing remains empty.
Page C.4 - 10
InsertExpress
Output Specifications Certain parameter files control the following selection parameters for drawing insertion. The description of the files can to a large extent be found in the chapter “DetailCenter Express”. In the following, we will only describe the parameters necessary for InsertExpress in the chapter “Technical Details”.
Scale File
Here, you see the file which gives rise to the drawing scales.
Border Frame File Here you see the file which gives rise to the drawing frame definitions. Mark Number File Here, you see the file which gives rise to the definitions for the US mark number, if you have selected the option „Use US mark number‟. Detail Output
Here, you see the directory where the finished workshop drawings will be stored.
You can modify the files and the paths of the specifications by clicking on the small button on the right side of the corresponding display.
Page C.4 - 11
InsertExpress
Drawing Sheet Specifications Here, the drawing sheets available in the sheet template file will be displayed into which the detail blocks can be inserted.
Drawing Frame
The drawing sheet into which the detail blocks have to be inserted.
Scale
The scale that has to be the base for the output drawing file.
Do not Scale
Indicates whether the loaded drawing has to be enlarged. In this case, the scale text is only entered into the title block.
Note: If you want to work with scaled (bigger or smaller) drawing frames or true to life sizes, please take care that all detail blocks to be inserted here have the same scale like the drawing. Otherwise, type sizes and symbol scaling (position flags, labelling...) will not match together. The best is to detail all detail blocks in a smaller size (1:xx) and to use the option “Do not Scale Frame“. Then, everything will be ok.
Page C.4 - 12
InsertExpress
Title Block and File Name After having decided on which sheet template the detail blocks have to be inserted, you specify here the name of the output files and the title block entries.
Start DWG Counter at Here; you enter the sheet number of the next drawing to be created. User Variable
Here, you can enter any text that will be inserted into your drawing number, depending on whether the corresponding variable is used.
Drawing Number Here, you can indicate another definition of the number if you temporarily want to modify the specifications of the sheet template file. Drawing Name
Here, you can indicate another definition of the drawing name if you temporarily want to modify the specifications of the sheet template file.
Template
Here, you see the current definition of the drawing number of the sheet template file for your information.
Next Page
Here, you see the current continuous number for your information.
Page C.4 - 13
InsertExpress
Title Block Entries Due to the fact that model data are not available any more at automatic insertion of detail blocks, it is possible to enter additional project-related data for the insertion process here.
Then, the indicated values are entered into the header of the drawing corresponding to the sheet template file.
Page C.4 - 14
InsertExpress
Finalising Works Finally, you can specify whether you want to delete the detail blocks after insertion.
Note: When the detail blocks are deleted here, the insertion information cannot be transferred into the model and an automatic update of the 2D-drawing would not be possible any more.
Page C.4 - 15
InsertExpress
C.4.3 Batch Insertion Mode When you combine several insertion processes, you can have run a complete detail library according to your specifications. To do so, change over to batch insertion mode and use the existing templates.
Select and Edit Templates On the following page, you can create a list to be run which is used for automatic creation of production drawings on collected sheets.
Page C.4 - 16
InsertExpress
A filter is inserted into the list
A filter is removed from the list
Double Click
the corresponding template is edited
Edit Templates You can also edit the existing templates in batch insertion mode by double clicking.
The edited template is saved. By clicking on this button, you save the current state of the template in the template management. Editing process is interrupted
Page C.4 - 17
InsertExpress
C.4.4 Format File Apart from the dialog settings, at the output of collected sheets by means of InsertExpress there are various other parameters, too, which are important for a correct output of the program. These can be found in a format file (*.frm), which can be specified in the settings. For more detailed information about the format file, please also refer to the chapter “DetailCenter Express“.
Important Parameters Area1
Drawing area where detail blocks may be inserted (have to have a valid value).
Area2
Area of the header (has to have a valid value). In this part of the drawing, no detail blocks are inserted.
ExcludeArea 1-4 Drawing areas where detail blocks mustn‟t be inserted. Later, these areas may e.g. contain parts lists, company stamps or other information about the company. The example shows the most important areas. In addition, the meaning of the detail distance (dialog specification) is displayed as well.
Page C.4 - 18
InsertExpress
Drawing Directory At the output of collected sheets, a drawing directory is automatically created as text file (*.txt) and as dBASE-file (*.dbf). The files are stored under the name of the model or under InsertExpress.txt (resp. dbf) in the detail directory. At the next output with InsertExpress both files are overwritten. DetailCenter Insert Express! drawing list ---------------------------------Output date: 27.02.2006 Output path: C:\Programs\Bentley\ProSteel\R18.0\autocad 2008\detail Job number: A23-5674F 1.) inserted drawings Pos
|GroupPos |Name
|GroupName
|Scale
|DwgFile
========|=========|=====================|==============|=========|========== 01 |01 |IPE 400 |IPE 400 |1.000000 |C:\Program 02 |02 |RRK 250x150x8 |RRK 250x150x8 |1.000000 |C:\Program 03 |03 |RRK 250x150x8 |RRK 250x150x8 |1.000000 |C:\Program …. …. 2.) error report Pos |Info ========|=====
In this file, you can see position, group position, name and group name of the corresponding component part as well as the file name of the created drawing and the scale. If an error occurs during insertion, this will be indicated, too.
Page C.4 - 19
InsertExpress
Page C.4 - 20
Cranked 2D-View
C.5
Cranked 2D-View
You can insert cranked views into the model if you require cuts and views through your models that are not situated on one plane. During detailing, they are treated like standard plane views; they show, different depths of the model simultaneously in one view and allow hiding of unwanted or less interesting areas. Example for a cranked view (here only as view): In the 2D-view, the supports A1, B1 and C2 are displayed.
Add Cut After starting this function, you first have to click on the start of polyline (intersection line) and then add the other points of the intersection line. Please pay attention that the line doesn't intersect nor that it is “running backwards”. In addition, the segments have to be perpendicular to each other. Otherwise, you don't obtain a satisfactory result. Terminate the entry by pressing the right mouse key if you do not want to add any further points. Now, you are prompted to specify the direction and depth of projection by clicking on another point (in relation to the start). All areas of the component parts, which are intersected by the polyline, are later displayed as cut – all areas which are situated within the intersection depth, are displayed as standard projection. Then, the following dialog appears which is also opened in case of modification of a cranked view via ProSteel properties.
Page C.5 - 1
Cranked 2D-View
Name:
The name of the cut.
Depth:
Here you specify the projection depth of the view.
Height:
Here you specify the height of projection of the view. All areas that are situated outside of this height are not displayed.
Colour:
Here you specify the colour of intersection line.
3D-Display:
The height of projection will be displayed as well so that you can check the coverage area.
Display Depth:
The depth of projection will be displayed as well so that you can check the coverage area. Together with '3D-display' you obtain a three dimensional display of the cranked view. The parts that are within the coverage of the cut are displayed. All other parts are hidden. The hidden parts are displayed again.
Page C.5 - 2
North Symbol
C.6
North Symbol
This function allows you to add a benchmark to your model, which may be evaluated later in different ways. At the moment, US-benchmark-symbols are available to help with the assembly of girders by indicating their alignment during installation. The point of the compass, which indicates north, is situated at the left side of the symbol or above if it is aligned horizontally (or at the upper end if it is aligned vertically).
North symbol (Reference) When the function is loaded, you first have to define the benchmark of construction. Click on the insertion point (reference point) first, then on another point for the benchmark. A north symbol will be created at the insertion point. Then, the following dialog will be displayed for further definition of the symbol and display in the shapes:
Page C.6 - 1
North Symbol
Options:
In the input field Elevation above, you can enter a reference height corresponding to the model coordinates, z=0. Select the layer on which the benchmark has to be displayed in the Layer selection list. In the input field Block path, you may indicate a path to previously defined benchmarks if you don't want to apply the built-in symbols. Click on the File Select button and a Windows file selection dialog will be displayed where you can select the block folder. Alternatively to the built-in symbols, you can also use any block as a symbol. The Y-axis of this block then corresponds to northern direction; it will be inserted with the corresponding rotation.
Symbol:
If the field Symbol is checked, the built-in symbols will be used for displaying the north arrow. You can select the desired symbol in the selection list. In the input field size, the scaling of the symbol can be defined.
Block:
If the field Block is checked, an external block will be used for displaying the north arrow. The scale factor of the block is entered in the input field Scale. Normally, the blocks of the folder entered in the input field Block path will be used. Then, you may select the existing drawings as blocks which have to be used. If the field "Display only DWG Blocks" is checked, you can select the blocks already contained in the drawing as blocks which have to be used. Select the block which has to be used as north symbol in the selection list block.
The above-mentioned inputs describe the display of benchmark in the model (which may exist only once), whereas the following dialog page describes the display of alignment in the shapes. On one hand, the benchmark has to be inserted into the model and, on the other hand, the option 'Benchmark' has to be selected in shape properties, otherwise the alignment of a shape cannot be displayed.
Page C.6 - 2
North Symbol
Horizontal Alignment
Here, it is possible to select either the built-in symbols or external blocks. As the proceeding is the same as already mentioned concerning the actual benchmark, we don't repeat these settings here, but only describe the additional options. Settings
The display for the alignment symbol for the points of the compass is set here. In the input field End Offset, you enter the distance between the insertion point of the symbol and the left resp. lower end of the shape. In the input field Center distance, you enter the distance between the insertion point of the symbol and the center of the shape. In the input field Colour, you enter the colour of the symbol as AutoCAD-colour number.
Horizontal is valid for horizontal girders and vertical is valid for vertical girders.
Page C.6 - 3
North Symbol
Vertical Alignment
Settings
The display for the alignment symbol for the upper edge of the component is set here. In the input field End Offset, you enter the distance between the insertion point of the symbol and the left lower edge of the shape. In the input field Offset, you enter the distance between the insertion point of the symbol and the upper edge of the shape. In the input field Colour, you enter the colour of the symbol as AutoCAD-colour number.
User-defined Symbols You have to define an AutoCAD-block in your model drawing or as external drawing (wblock) containing the block attribute “LABEL” to apply user-defined symbols. This attribute is filled with the current text for alignment.
Page C.6 - 4
North Symbol
Shape Labelling
Annotations:
Enter the text which is to be displayed in the represented symbols in the input fields for the points of the compass and for Upside.
DetailCenter…:
The global view of the DetailCenter can be set here. Check the corresponding point of the compass in order to set the global view.
Page C.6 - 5
North Symbol
Page C.6 - 6
Manual Dimensioning Points
C.7
Manual Dimensioning Points
Some steel constructions are very complex so that the system is not always able to determine the suitable dimensioning automatically. Often it is even not possible to find all suitable points because important reference measures such as, weld check measures, or similar values have to be defined individually and are not automatically known to the system. For this purpose, you can define dimensioning points directly in the model for the derivation of group drawings or overviews; the system has to be forced to dimension them. In contrast to the subsequent manual dimensioning of 2D workshop drawings, the advantage of this function is that they can be updated at an automatic 2D-update.
Group General View:
Here, you specify how the dimensioning points have to be depicted in the 3D-model. Only Points – Only the two dimensioning points and a short connecting piece will be depicted. With Line – Apart from the dimensioning points, the connecting line is displayed as well. This facilitates checking of the corresponding measured points. With Text – The directly measured dimension is additionally displayed as check text. Please note that these default settings don‟t have any influence on the depiction in the 2D-plans.The dimensioning objects there are subsequently replaced by a usual standard measure of ProSteel.
Page C.7 - 1
Manual Dimensioning Points
Only Points
Here, you specify the size to be used for depiction of the two measured points.
Layer
Here you specify on which layer the object has to be inserted.
Only in Plane
The picked points are projected onto the current view plane. Thus, an object snap into the depth is avoided.
Loop
The command is carried out as a loop. You can insert several manual-dimensioning objects one after the other without having to call the function again each time.
Group Options Horizontal
A measure is created in dimensioning direction of the group or of the overview that runs from the first to the second point.
Vertical
A measure is created perpendicular to dimensioning direction of the group or of the overview that runs from the first to the second point. When there is more than one target point, the dimensioning direction is determined by the first added target point.
Direct
A direct (e.g. diagonal) measure is created in the group or overview, running from the first to the second point.
Baseline Dimensioning When you have seized a reference point with several target points, each target point will get its own dimension (starting from the reference point). Otherwise, reference point and target points are created as continuous dimension chain. In Groups
The dimensioning object is evaluated in the group to which it has been assigned.
In Views
The dimensioning object is evaluated in the overview drawing where it is included.
ECS-System
The coordinate system of the dimensioning object is displayed in the model so that you can check the position.
By highlighting both entries an identical dimensioning object can appear both in a group drawing and in an overview.
Page C.7 - 2
Manual Dimensioning Points
Beneath, you see an example of the variants in case of multiple dimensioning points: The dimensioning points which first seem to be similar in the 3D-model (above) create different results in the 2D-drawing (below). For both objects, only the „Horizontal‟ dimensioning direction has been activated. The dimensioning object on the left here has been created with the option ‚Baseline Dimensioning‟ so that all dimensioning points refer to the left reference point (1). On contrast, the right dimensioning object has been created without this option, and a continuous dimensioning chain (2) is created with the right reference point.
Dialog Commands SINGLE Click on this button to add a single dimensioning object consisting of the start and target point. You first have to click on the group this dimensioning object is to be assigned to. Then, you click on the start and afterwards on the target point of dimensioning. SEVERAL Click on this button to add a dimensioning object with a reference point and several target points. You first have to click on the group this dimensioning object is to be assigned to. You then click on the base point of dimensioning and afterwards the other dimension points. Pressing ESC key ends adding further dimension points. Page C.7 - 3
Manual Dimensioning Points
Selection of Views In principle, dimensioning objects have to be assigned to a group or to an assembly, even if the dimensions only appear in an overview drawing. At use in nested group structures, they are always assigned to the lowest hierarchy and controlled by means of their parameters at detailing. If you pick e. g. the subordinate part of a subgroup which is part of a standard component part group, the dimensions will only be displayed in the detailing of the component part group, when manual dimensioning points have been activated there for subgroups. At the later detailing, the dimensions are only displayed in the view that corresponds to a view at insertion (or to the opposite direction). Therefore, you should insert a dimensioning object on a component part in the view in which later you want to see the length to be dimensioned. Hint: When the dimension doesn‟t appear in the desired view, it was probably inserted in a wrong UCS plane and perhaps the dimensioning points were only corrected later. You can check this by making display the coordinate system of the dimensioning object. Its X/Y-pane has to be parallel towards the view plane. If you want to see the length in two views that are not opposite to each other, from view direction, you have to add the dimensioning object for a second time.
Modification of Dimension Points You can modify an existing dimensioning object later via the ProSteel properties by e.g. adding further dimension points using the PLUS button or by removing them using the MINUS button. Other properties such as the desired dimensioning directions can also be modified. All picked dimension points can be moved later by means of the grips, if you modify your construction.
Page C.7 - 4
Manual Object Link
C.8
Manual Object Link
The logical links are required for dimensioning and recognition of neighbouring parts. These are created during most ProSteel processing functions. However, if there isn‟t any link between two component parts, a so-called “manual link” can be placed between the parts. The only task of this link is to create a dependency; it hasn‟t got any additional function. To create a manual link, first select the attached part of the connection (this should be the adjacent part, e.g. the latch-bolt) and then the part that it has to be connected to (e.g. the support). A logical dependency between the component parts is created which is important for dimensioning.
Page C.8 - 1
Manual Object Link
Page C.8 - 2
Global Scale
C.9
Global Scale
Like AutoCAD, ProSteel works in drawing units according to the scale less method, a natural scale of 1:1 being assumed (i.e. a drawing unit corresponds to one millimetre natural size). Any detailing with respect to the 2D shop plans, however, is prepared in a scale you entered beforehand. However, if you want to attach e.g. position flags later – that have been entered in the original size (mm) in the pre-settings – you must set a scale in order to ensure uniform sizes of these elements and a uniform aspect of your drawings. This so-called Global Scale basically corresponds to the later plot scale of your drawing. When the program needs a scale and no special scale is entered, the global scale will be adopted. When using the command, the following prompt is displayed in the command line Previous ProSteel Scale = 1.0000 Please enter the new default scale 1: ? The current scale is displayed. Now enter the new scaling factor to be used for your work. When you enter e.g. the value 10, the default scale 1:10 will apply. Do not confuse the global scale with the length scaling. The global scale refers to the later printout of the drawings and scales text sizes, symbol sizes, etc.
Page C.9 - 1
Global Scale
Page C.9 - 2
Drawing Border
C.10 Drawing Border ProSteel allows you to easily insert drawing frames in different formats and scales. The program package comes loaded with several sample frames and borders. You can also add your own frames and borders. A drawing border is inserted as a scaled block corresponding to the drawing scale. The matching original blocks are filed in scale 1:1. After having defined a title block with block attributes within a border, you can fill it in using the command ‟Drawing Info‟. A dialog box gives you access to several well-sorted border variations. The data are filed in a tree structure. The standard version already includes the main entries A0-A4. You can either delete them or add further entries. The actual entries can only be entered as subordinate item under a main item.
Page C.10 - 1
Drawing Border
Click on this button to generate a new entry beneath a gusset which had been selected before.
Click on this button to generate a new gusset beneath a gusset which had been selected before. Click on this button to work on the selected entry..
Click on this button to delete the selected entry or gusset with all contained subordinate entries. Scale
The drawing border is inserted in the scale entered here.
Activate Limits
If this field is checked, the drawing limits are put on the edge of the border to avoid drawing outside of the border. Here, you load the selected entry and the drawing block into the model area. Here, you load the selected entry and the drawing block into the paper area.
Creation of Entries Select the main point and either press the right mouse button for the subordinate menu or the button CREATE. The following dialog opens:
Page C.10 - 2
Drawing Border
Block Path
Enter the path to the block to be inserted.
Width
Enter the width of the block if you want to work with active limits. If the field „Active Limits‟ has been checked, these values are preset as limits with the specified scale. It is of course possible as well to specify different values for the limits.
Height
Enter the height of the block if you want to work with active limits. If the field „Active Limits‟ has been checked, these values are preset as limits with the specified scale. It is of course possible as well to specify different values for the limits.
Comment
Here, you can enter a comment for identification.
Click on this button to select the block via a file selection dialog. Then, the path is entered in the input field block path.
Click on this button to select the standard sizes for width and height by means of a dialog.
After these data have been inserted, a new subordinate entry is displayed in the tree, which still has to be named. Then, the entry is created and can be used immediately.
Page C.10 - 3
Drawing Border
Page C.10 - 4
Manual 2D-Cut
C.11 Manual 2D-Cut This command is used to insert a cut into 2D details. The prerequisite is that the details are still intelligent details. From object selection, the program independently recognizes which objects can be cut and which objects only represent the borders of the cutting arrows (e.g. dimensioning). This means that the cutting arrows are in any case attached outside of dimensioning if you select e.g. a completely dimensioned group including the measures. The following dialog opens after selection of the command. There, you can make the settings for label and depiction of cutting symbols:
Label
Here, you enter the text without the cutting code that has to be used as designation. Enter e.g. Cut.
Sign
Enter the desired cutting code such as e.g. the letter A.
Text Style
Select an AutoCAD-text style for the labels.
Layer
Select the AutoCAD-layer the text and the cutting symbols have to be created on.
Line Type
Select the line type to be used for the depiction of the cutting line.
Page C.11 - 1
Manual 2D-Cut
Detailing Style
Select the detailing style to be used for the depiction of the component parts (e.g. shadings etc.)
Colour Symbol/Text In the input fields for Symbol and Text you enter the colour of the cutting arrow and of the text. You can either specify the colour directly by entering the AutoCAD colour number, or you click on the desired input field and then on the SELECT button. Then, the AutoCAD dialog for colour selection is displayed where you can select the colour directly. Text Size
Here, you enter the size of the label text.
Create Block
A common block is formed consisting of the cutting arrows and the codes. Otherwise, they are still single lines and text.
Complete Groups
If his option is activated, always the complete group will be selected even if only a single component part of the group has been selected.
Dialog-Commands LINE Click on this button to create a cut through component parts along a line to be selected. Select the parts to be depicted, then the cutting line. Then, you have to indicate the depth of the cut. If you press ESC here, only a cut at the corresponding position will be made. Otherwise, the parts will be cut at the position and the projection of the rest will be displayed. After having created the cut and after having attached the cutting code, you can place the result anywhere you like. OBJECT Click on this button to create a cut on the base of a cut object. This may be a view frame or an offset cut. You only have to select the object; selection of the parts is carried out automatically.
UCS Click on this button to create a cut of 3D component parts at the current UCS. After selection of the parts, the cut is created at the XY-plane of the current UCS.
Page C.11 - 2
Manual 2D-Cut
Position Flags Apart from the actual cut display, it is also possible to attach position flags in manual cuts. In addition, you can add component part information to 2D-lines to enable the attachment of position flags at a later moment.
Position Flags
Position flags are additionally attached.
Template
Select the distribution template for the position flags which you created before using the function for position flags.
Scale
Scale for the size of the position flags
Element Data
The component part data of the original 3D-elements are added to the created 2D-elements so that it is possible to attach position flags later.
Page C.11 - 3
Manual 2D-Cut
Depiction of the Cut You can generate the cutting code either via a generated graphic or via blocks to be selected.
Group Symbol Symbol
The cutting code is created as a symbol consisting of cutting arrow and code.
Continued
The two partial lines are connected through the cut part.
By Side
The cutting code is written beside the cutting arrow; otherwise it is written above the cutting arrow.
Arrow Size
Specify the size of the arrow.
Distance/Length Here, you specify the distance of the cutting lines, from their beginning to the utmost bordering edge (e.g. the dimensioning), and what has to be the length. Group Block Block
Page C.11 - 4
A freely selectable block is used for the cutting code instead of a cutting arrow. In the input fields Top Block and Down Block you see the selected block path. You can assign a block drawing by clicking on the SELECT button.
Manual 2D-Cut
Block Path
Here you indicate the directory with the files containing the block definitions for the cutting arrows. Select the directory via the neighboring button.
Block Top
Here you select the block for the upper cutting arrow.
Block Bottom
Here you select the block for the lower cutting arrow.
Example of a Cut at a Group The edge of the cut is located in front of the left stiffener and the depth of the cut extends beyond the head plate – you see all of these parts from the right; the shape is cut and the drill holes are invisible.
Page C.11 - 5
Manual 2D-Cut
Page C.11 - 6
Manual Dimensioning
C.12 Manual Dimensioning The ProSteel dimensioning commands allow dimensioning of component parts and groups automatically in the drawings as well as manual dimensioning with useful help functions. For example, the overall views of the model may be dimensioned for an overview. However, it is also possible to dimension individual component parts or groups and then create details manually in cases where automatic detailing is not suitable for your application. In addition, all major standard functions of regular AutoCAD dimensioning are available for revision or modification of 2D workshop drawings. The dimensioning functions are principally based on the settings for detailing style (dimensioning), therefore general settings like AutoCAD dimensioning style, optimization, etc. have to be executed in the respective dialog box. The detailing style dialog can also be accessed using the dialog box described below and then the style can be modified or a new detailing style can be created. HINT: Please take care that the settings of scale and scaling of the component part are correct. Please refer to the chapter “Detailing” and carefully read through the chapter “Dimensioning Style”.
Page C.12 - 1
Manual Dimensioning
Group Settings Alignment
Page C.12 - 2
Here, you set the general direction of dimensioning. Horizontal – The dimension chain is always running in Xdirection. Vertical – The dimension chain is always running in Ydirection. Line – The dimension chain is running in the same direction like a pre-set line. To carry out the function, click on the line determining the direction. You can use this method to dimension e.g. along a cut edge. As picked – The dimension chain is running in the direction specified by the two points first picked. This is e.g. reasonable if you want to dimension diagonal holes in a gusset plate. Like Part – The dimension chain is running in the same direction like the length direction of a component part. This is the optimal method to dimension along a diagonal shape by clicking on the shape. Arc Dimension – You can dimension the length of an arc. Angle Dimension – You can dimension an angle.
Manual Dimensioning
Origin
Here, you specify which origin is used for alternative coordinate dimensioning. Auto – The dimensions are preferably related to the lower left point of the reference part‟s coating or to that of the group‟s main part. If it doesn‟t exist, they are related to the current UCS. Default – The dimensions are related to any point specified by you. UCS-Origin – The dimensions are related to the origin of the current UCS. Part – The dimensions are related to the lower left point of the reference part‟s coating or to that of the group‟s main part. Start Dimension Chain – The dimensions are related to the beginning of the dimension chain.
Reference Point Here, you specify whether a reference part has to be used for dimensioning. This is necessary to evaluate shape shortenings correctly. However, the part has to be an intelligent 2D part‟. No – A reference part is not used for dimensioning and all lengths are evaluated in the measured length. Default
A pre-set part is used as reference part. Thus, you don‟t have to select it each time you apply this command. This option helps you to dimension more complex groups. Select – You are always prompted for the reference part, which then has to be selected.
With Angle
At arc dimension, the included angle is additionally entered as well into the dimension.
With Radius
At arc dimension, the reference radius is additionally entered as well into the dimension.
Continuing Dim. Chain A dimension chain can be built continuously by clicking on individual points. If this field is not checked, you have to continue dimensioning single distances and you can obtain a dimension chain with gaps. Scale automatic The settings for scale and object scaling are automatically determined by the global scale and by the reference part. If your work has been logical according to ProSteel (either unscaled details and global scale for plot or scaled details and scale 1:1 for the plot), incorrect default settings are avoided. No Scaling
The parts to be dimensioned are not scaled. Thus, the original measured lengths can be used. However, if the field has not been checked, all measured lengths are multiplied with the indicated scale under 'New Scale'.
Page C.12 - 3
Manual Dimensioning
New Scale
The scale used for converting the measured lengths and text sizes depending on the settings for part scaling under „Parts Not…‟ Here, you enter e.g. the value 10 if you have selected the „scale 1: 10 with object scaling‟ at detailing. The details now have been decreased by factor 10.
Group Fence Chains Outside Dimensions The outside edges of the seized component parts are evaluated as fence points and dimensioned in a dimension chain. Shape Center
Starting and end points of the shapes are created as fence points and dimensioned in a dimension chain.
Shape Edges
The corner points of the coating are evaluated as fence points and dimensioned in a dimension chain.
Overall Dim.
An additional dimension chain is created stretching over the overall dimensions of the fence chains.
Group Coordinate Measures At Overall Dim.
Normally, the coordinate measures for overall dimensions are omitted at automatic detailing or part dimensioning. If this option has been selected, these are displayed as well to allow e.g. in overviews to specify the position of component parts related to a reference point by means of the overall dimensions of these parts.
Always positive
If this option has been checked, always positive coordinate measures are indicated. You can obtain a relative dimensioning around a reference point when the direction is not important.
Display Zero
If this option has been checked, the coordinate measure having the value “0” is displayed in a dimension chain. Deactivation is reasonable if the origin (reference) is only indicated once.
Display First
If this option has been checked, the first coordinate measure is displayed in a dimension chain. Deactivation is reasonable if you want a connection with an existing dimension chain or an identical starting point has only to be indicated once.
Page C.12 - 4
Manual Dimensioning
Display Last
If this option has been checked, the last coordinate measure is displayed in a dimension chain. Deactivation is only possible if you have a dimension chain of normal measures and simultaneously existing coordinate measures.
Others Info Window
Depending on the selection, you are informed about the type of dimension chains, global scale of the drawing, pre-selected origin of coordinate dimensioning and pre-selected component part for part reference.
Detailing Style
Here, you select the detailing style controlling the settings for dimensioning style, optimization, etc. At automatic part dimensioning, you also specify the points of a part or of a group to be dimensioned in the detailing style. Therefore, at identical detailing style the result of automatic detailing and automatic part dimensioning are in no way different.
Dialog-Commands SINGLE PART Click on this button to dimension a shape or any plate automatically. The relevant points for dimensioning are determined according to the settings in detailing style and the dimension chains are attached. You have to click on the part to be dimensioned. If the „Choose Position‟ option has been activated, you can place the created dimension chains at any position you like. For pre-selection of dimensioning direction, the option „As Part‟ is recommended for most cases, you can, however, specify other directions as well. GROUP Click on this button to dimension a group automatically. The relevant points for dimensioning are determined according to the settings in detailing style and the dimension chains are attached. You have to click on any part of the group you like. If the „Choose Position‟ option has been activated, you can place the created dimension chains at any position you like. For pre-selection of dimensioning direction, the option „As Part‟ is recommended for most cases, you can, however, specify other directions as well.
Page C.12 - 5
Manual Dimensioning END PLATE Click on this button to dimension an end plate automatically. The relevant points for dimensioning are determined according to the settings in detailing style and the dimension chains are attached. You have to click on the end plate first and then the connecting shape (this is the shape to which the end plate belongs). If the „Choose Position‟ option has been activated, you can place the created dimension chains at any position you like. For pre-selection of dimensioning direction, the option „As Part‟ is recommended for most cases, you can specify other directions as well. INSERT DIMENSION Click on this button to insert new dimensions in an existing dimension chain. The other dimensions will be adapted. Select all dimensions belonging to this chain. Then you have to pick a dimension as reference dimension for the position of the dimension chain. If this demand is only confirmed with RETURN, the first dimension of your previous selection will be used.
Page C.12 - 6
Manual Dimensioning
Now the program filters the dimensions, which are not situated in a line with this reference dimension. Dimensions of other dimension chains may also belong to your selection (e.g. due to “Crossing” the selection). Now, the dimension chain will be reconstructed and you can then insert the new dimensions. DELETE DIMENSION Click on this button to delete a dimension from an existing dimension chain. The other dimensions will be adapted. Selection of the dimension chain and of dimensions is identical with the dialog command INSERT DIMENSION it has not to be described once again. MODIFY DIMENSION CHAIN Click on this button to modify the style of a dimension chain, e.g. to convert it from normal dimensions to coordinate measures or to modify the detailing style. Selection of the dimension chain and of dimensions is identical with the dialog command INSERT DIMENSION; it does not have to be described once again.
SINGLE DIMENSION Click on this button to attach a single dimension. Linear Dim:
Click on the first and second dimension point as well as the position of the dimension line. The dimension is aligned according to the direction. Depending on the settings for direction and part reference, you still have to click on a reference line and/or a reference part.
Arc Dimensions: Click on the centre of the arc first and then the starting point and end of the arc (the end will be corrected correspondingly). Afterwards, you pick the dimension line position. An arc is principally looked on counter-clockwise from beginning to end. Angle Dim.:
Click on the vertex of the angle first and then the end of the first and second side. After you pick the dimension line position. An angle is principally looked on counter-clockwise from beginning to end.
Page C.12 - 7
Manual Dimensioning DIMENSION CHAIN Click on this button to attach a dimension chain out of several dimensions. Click on the position of the dimension line first and then the points to be dimensioned. The dimensions are aligned according to the direction. Depending on the settings for direction and part reference, you still have to click on a reference line and/or a reference part. If you selected the option „As Picked‟ for the direction, the first two dimension points determine the direction of the dimension chain. If you selected the option ‟Continuing Dimension Chain‟, you are dimensioning according to the AutoCAD-dimensioning function „Continue‟. If this option has not been activated, you continue indicating pairs of points for all dimensions following the first one. You can obtain an interrupted dimension chain with several dimensions. FENCE CHAIN Click on this button to create a fence chain dimensioning. The dimensions are aligned according to the direction. Depending on the settings for direction and part reference, you still have to click on a reference line and/or a reference part.
CHANGE DETAIL STYLE Click on this button to open the dialog for setting parameters for the detail style. If you move to another style in the „Detailing Style‟ selection list, the display in the detail style dialog will be updated as well.
LOAD DETAIL STYLE Click on this button to load a detail style from the hard drive into your drawing. Select the desired style file (*.sty) in the file selection dialog (*.sty). A new loaded detail style at the same time is the current detail style of dimensioning and it is displayed in the „Detailing Style‟ selection list. SPECIFY ORIGIN Click on this button to define the origin (reference point) of coordinate dimensioning for the time of a ProSteel session. Click on the corresponding point in your drawing. This is reasonable if dimensioning has to be made e.g. within an overview or a more complex group. Select the setting Default under „Default Origin‟ if all following coordinate measures have to be calculated related to this reference point.
Page C.12 - 8
Manual Dimensioning SPECIFY REFERENCE OBJECT Click on this button to define the reference object for shape shortening etc. for the time of a ProSteel session. Click on the corresponding part in your drawing. This is reasonable if dimensioning has to be made e.g. within a more complex group. Select the setting Default under „Part Reference‟ if all following actions requiring a reference object have to be related to this selected part.
Dimension Chains During the acquisition of the measurement points the dimension chains are able to capture the points correctly even if the dimensions have been indicated in a different sequence or if the dimensions overlap. The picture below illustrates the interconnections:
Example (1) shows a dimensioning using the ‟Continuing Dimension Chain‟ option and the following sequence: First, click the distance C/F, then point D, and finally point A. Example (2) shows the result if the first dimensioning is like (1) and the next input is the dimensioning of the distance from the dotted line to point B. The „Combine Identical Dimensions from 3 on‟ option in the detail style is active as well (since A/B, B/C and C/D were created!) Example (3) shows a dimension chain without the „Continuing Dimension Chain‟ option. The following was dimensioned: the distance A/C and then D/E. A new measurement of the distance B/F would now divide the distance of 400 and create a second measurement from point E to F.
Page C.12 - 9
Manual Dimensioning
Alignment and Coordinate Dimensioning Some variants of dimensioning are admitted especially in combination with overviews due to the possibility to specify the reference points for coordinate dimensioning and the alignment of the dimension chains differently. The picture below shows two dimension chains with coordinate measures. The dimension chain (a) has been related to the UCS origin (a1) and the first and last coordinate measure has been deactivated. The dimension chain (b) has been fixed to a free reference point (b1) and negative coordinate measures have been admitted. These now can serve as relative height indicators. In addition, a dimension chain (c) has been attached the position of which is determined by the first two measurement points (c1) and (c2). Then, the two holes (c3) have been added as further measurement points. This would also have been possible by modification via the INSERT DIMENSION dialog command.
Page C.12 - 10
Manual Dimensioning
Fence Chain Dimensioning Fence chain dimensioning is a semi-automatic dimensioning mode, where the program determines the relevant points for dimensioning in several different objects. Once this is done, you can position the dimensioning lines via presettings for „Fence Chain Dimensioning‟ you can select the dimension chains and the reference points. With the settings for „Direction‟ you have determined the general dimensioning direction. This figure gives you an example for fence dimensioning: First, select the objects to be dimensioned – here the three shapes. Then, you can still click on the two reference points (A) and (B) which then will be added to the dimension chains and which will influence the overall dimension if they are situated outside of the shape dimensions. The program then prompts you to indicate the starting point of the auxiliary lines (C) and the insertion point of the first dimension chain (D). Depending on the selection, the dimension chains for shape centers (a), shape edges (b), outer edges (c) and overall dimension (d) are then inserted and, depending on the combination of dimension chains, extended to the outer edge of the overall dimension resp. of the outer shapes.
Page C.12 - 11
Manual Dimensioning
Page C.12 - 12
Elevation Flags
C.13 Elevation Flags Using this command, you can insert elevations for component parts in the display windows. This command may also be used to insert length and width distances as elevation symbols. The parameters length, width, and height correspond to the related parameters of the work frames.
Elevation Flag
The style used for displaying the elevation.
Layer
The elevation is inserted on the selected layer.
No Dynamic
The dynamic of the flag is switched off after insertion. This is meant for application in 2D-mode, to avoid moving a view that forces an update of the displayed values.
Scale
Indicates the scale used for displaying the inserted elevation symbol in the drawing.
Length Scaling
The length scaling for the distance value; it is also possible to attach elevations in scaled details.
Page C.13 - 1
Elevation Flags
The distance in z-direction is indicated in the elevation.
The distance in y-direction is indicated in the elevation.
The distance in x-direction is indicated in the elevation.
A symbol is created within a group, which will be output as elevation at later detailing.
Click on the button representing the desired measurement and the elevation can be inserted. First click on the definition point (measuring point), then you can position the elevation symbol (ORTHO is activated automatically) and finally, you position the dimension text (ORTHO is deactivated again when it was in the OFFposition before the function was selected).
Page C.13 - 2
Elevation Flags
Specification of the Origin Coordinates
X, Y, Z-Coordinate Here you enter the coordinates of origin for Length (Y), Width (X) and Height (Z) measurements. The picked points will then be referenced to these coordinates. Usually you enter the origin of the corresponding work frame. The coordinates can also be defined in the drawing using the mouse.
Page C.13 - 3
Elevation Flags
Elevation Depiction
Elevation Style
Use this box to select the style to be applied for the depiction.
Create Geometry
The depiction of elevations is specified by preset parameters in this dialog.
Block Geometry An AutoCAD block specifies the depiction of elevations. Any block can be selected. Block Path
In this field, you specify from which directory the blocks for selecting the geometry of the elevations have to be read.
Bitmap
You can set an own bitmap for a style for easy recognition. This bitmap then is displayed in the selection box as well. Click on this button to save the current settings as style. Click on this button to load a style for the elevations and thus to use it again Click on this button to modify the display of the elevation if „Create Geometry‟ has been selected. ,
Page C.13 - 4
Elevation Flags
Geometry Definition
Line Type
Lines means that the elevation symbol is represented as a line triangle. Filled Triangle means that the elevation symbol is represented as a partly filled triangle.
Default Format
You can indicate a certain text format with a variable $(V) for the measurement to the elevation. The variable then is replaced by the current value.
Text Style
Presets the text style to be used for depiction of the texts in the elevation.
Note
The indicated notes are output as text together with the elevation.
Group Options Guide Line
The elevation has a guideline to the definition point.
Dynamic
The elevation is visibly displayed during insertion process.
Page C.13 - 5
Elevation Flags
Bottom Side
The elevation symbol is turned upside down (point to the top, e.g. for the indication of lower edges).
Thousand sep
The thousand position is separated from the other digits by a point, i.e. 2.500 instead of 2500. If you require the digits after the decimal point, this option should be deactivated.
Group Sizes Symbol Size
the size of the elevation symbol.
Text Size
size of text of elevation data
After Decimal
The number of digits after the decimal point of the calculated value
Pre-Decimal
The number of digits in front of the decimal point of the calculated value, if the value is smaller than the number of pre-decimal digits, the rest is filled up with noughts.
Group Colours Colours
Use the fields Line and Text to set the corresponding colour for the height object. -1 as value means that the presetting is used.
In the following, you can see an example of different elevations:
Page C.13 - 6
Elevation Flags
Style Management Your elevation styles are managed in this part of the dialog. New styles can be created; existing styles can be loaded, updated or even deleted.
Press the above-displayed symbol to create a new elevation style. The style then will be saved by means of presetting in the directory for elevation styles as a file having the ending *.sty-file. Now you can work with this style on all other pages of this dialog. If you want to work with a special style, which is not in the drawing, but stored on the hard drive, you can load it using this function. Select the corresponding *.sty-file in the directory of elevation styles and load the file. The style will be available at once. If you don‟t require a style any more in the drawing, use this function to remove it. Click on this button to modify the order of the display. The order in the display of the style list is not sorted. You can specify your own sorting. For this purpose, use the two arrow buttons to move the highlighted style towards the top or towards the bottom of the order.
Page C.13 - 7
Elevation Flags
Page C.13 - 8
Weld Symbols
C.14 Weld Symbols Using this command, weld seams or weld symbols may be inserted in the model or in any 2D-drawing. To conserve memory, a weld seam in a 3D model is represented by a line only. But it contains all necessary data, so that a weld symbol can be added later. After inserting the weld symbol, you can still change data in the dialog and check the result immediately in the drawing. A symbol can be composed of an upper and/or a lower part. Since the settings are identical, only one variation is described here. Weld seams are objects, and allow any kind of alteration at a later date by using the context menu “Change PS Properties”. Define the required seams by using the dialog and store them by using the function „Templates‟. This allows fast access to the different symbols.
Creating Weld Symbols and Seams
Page C.14 - 1
Weld Symbols Weld Style
The style used for displaying the weld seams.
Layer
The weld seam is inserted on the selected layer.
Thickness Top Side Here, you can overwrite the value of the welding thickness of the style to create different thicknesses with identical default settings. Thickness Bottom Side Here, you can overwrite the value of the welding thickness of the style to create different thicknesses with identical default settings. Scale
Indicates the scale used for displaying the inserted weld symbol in the drawing. Click this button to insert weld symbols. For this purpose, select the start point of the guideline and the insertion point of the flag. Click this button to insert a weld seam. For this purpose, select the start and the end point of the weld seam and the weld seam will be created with the specified style. Click this button to attach a weld flag at an existing weld seam. Select an existing weld seam and then specify the insertion position of the weld flag. Click this button to attach another guideline at a weld flag. First select an existing weld flag and then draw the new reference arrow to its target point.
Click this button to remove a subsequently added guideline.
Click this button to weld component parts with each other. Select two parts to be welded. ProSteel now creates a weld group with the corresponding weld seams using the specified settings for weld groups (see also „Form Weld Groups‟). Click this button to define the properties of a weld group.
Page C.14 - 2
Weld Symbols
Form Weld Groups
Create Group
A new group is formed out of the two component parts, unless it already exists
Treat as one
If this option has been activated in the CAD system the group is set on this selection mode.
With Welds
The weld seams are integrated into the group as well.
Min. Weld Length
A weld seam created using this command may not be shorter than the indicated length.
Gap
The minimum gap between these parts is specified. If the gap is bigger than the specified value, the parts will not be welded. The value should not be equal 0 to avoid problems with tolerances.
Page C.14 - 3
Weld Symbols
Depiction of Weld Symbols The depiction of weld symbols is determined by styles, which have to be selected at the corresponding positions. You may set these styles here.
Weld Style
Use this box to select the style that has to be applied for the display. Created Geometry The depiction of weld symbols is defined in this dialog by means of specified parameters.
Block Geometry
The depiction of weld symbols is defined by means of any AutoCAD block that can be selected.
Block Path
In this field you specify the block path for selecting the geometry of the weld symbols have to be read.
Bitmap
You can set your own bitmap for better recognition of the style. This bitmap is displayed in the selection box as well. Click this button to save the current settings as style.
Click this button to load a style for the weld symbols and to use it again. Click this button to specify the general settings of the weld symbol or the weld seam.
Page C.14 - 4
Weld Symbols Click this button to specify the special settings for the upper side of the weld symbol (upper weld seam). Click this button to specify the special settings for the lower side of the weld symbol (lower weld seam). Click this button to specify further settings for the evaluation in the parts lists.
General Default Settings
Line Type
Here you specify the type of the guideline. No Line – No guideline will be displayed. Line – The guideline consists of only one single line. Line with Arrow – The guideline has an additional arrow at the origin of the line. Line with Point – The guideline has an additional point at the origin of the line. Line with Block– The guideline has an additional block of any kind at the origin of the line.
Line Block
Here you can select the AutoCAD-block, if the option „Line with Block‟ has been selected.
Text Style
Here you indicate the AutoCAD text style for the labels.
Page C.14 - 5
Weld Symbols Options
Select the type of weld seam. All around – The weld symbol is added for an all around weld seam. Field Weld – The weld symbol is added for an on-site seam. Replaced - The weld symbol is added for an alternating weld seam. Staggered – Staggered entries are displayed instead of an extra symbol for an alternating weld seam. Tail –The weld symbol is added by using this sign.
Text Size
Size of the label text
Symbol Size
Size of symbol representation.
Scale
Enter the scale for the data in the entry fields Text Size and Symbol Size. When selecting this function, the default scale is entered automatically.
Colour
Specify the colour numbers for the Line, the Symbol and for the Text.
Defaults Upper and Lower Side
Thickness
The thickness of the weld seam.
Prefix
A prefix placed in front of the thickness of the weld seam.
Length
The length of the weld seam
Gap
Here you can indicate a gap in the weld seam.
Page C.14 - 6
Weld Symbols Comment
Here you can indicate a comment to the weld symbols.
Add. Length
Additional length details
Symbol
In this list, you can select the type of the weld seam (flat-flap weld, HV weld, etc.).
Toward Position
Indicates whether the weld seam has to be carried out in this way
Symmetrical
The bottom side data corresponds to those of the top side (only available in „top side‟).
Defaults Parts List
Material
The weld material which has to be used
Register
The created weld seam has to appear in the parts list.
Weight/LU
The weight of the weld seam per length unit.
Price/LU
The price of the weld seam per length unit.
Page C.14 - 7
Weld Symbols
Style Management In this part of the dialog, your weld styles are managed. You can create new styles, load styles, update or delete styles.
Press the above symbol to create a new weld style. The style then will be stored as *.sty file with the default settings in the directory for weld styles. Now you can work with this style on all other pages of this dialog. If you want to work with a special style which is not stored in the drawing, but on your hard drive, you can load this style using this function. Select the corresponding *.sty file in the directory for weld styles and load the file. The style will be available at once. Use this function to remove a style, that is not required any more, from your drawing. Click this button to change the order of the display. The order in the display of the style list is not sorted, but you can sort yourself. Use the two arrow keys to scroll the highlighted style up or down in the order.
Page C.14 - 8
Weld Symbols Use this function to update the styles loaded in your drawing. All styles in the drawing are replaced by the styles stored on the hard drive.
Page C.14 - 9
Weld Symbols
Page C.14 - 10
Short 2D manually
C.15 Short 2D manually Since shapes are shown in full scale during detailing, they may sometimes be very long and not fit in the drawing. Under certain circumstances, you might deliberately want to have some “out-ofscale” shapes (lengthwise) in your drawing, e.g., if large areas of the components do not have any drill holes or similar features. This command allows you to shorten finished shapes in a way that areas with many details remain unchanged and a break is inserted in an insignificant area. The figure below shows the original shape and then the shortened display (slightly enlarged).
Select this command and you will be first prompted for the shape to be shortened which you have to click. Then you are prompted for the starting and end point of the shortening, which you can either enter or pick. If you press the ESC-key instead, the shortening is automatically determined and carried out, as it is the case for detailing. If you want to dimension the shape manually later, you can then consider the shortening as well. Note: In some cases it may be that the command doesn‟t work as it should. In this case, check whether the drawing elements you want to treat are blocks (which cannot be dissolved). You first have to dissolve these blocks before you can go on.
Page C.15 - 1
Short 2D manually
Page C.15 - 2
2D-Cutout
C.16 2D-Cutout Using this command, you can cut any 2D lines at a polyline at the same time. After selecting the command, you have to pick the points of the polyline. The same command functions are available as when drawing a polyline. Then, all of the lines extending past the polyline are cut off at this line. When you want to use this function to cut out “intelligent” ProSteel-2D-objects (such as shapes after detailing), you first have to explode them into AutoCADlines. However, don‟t forget that after that the objects have lost their properties.
Page C.16 - 1
2D-Cutout
Page C.16 - 2
Hole Display
C.17 Hole Display Apart from standard geometrical display of holes, in 2D-plans it is possible, too to display the holes by means of any user-defined hole display style. This hole display style describes the display of a drill hole dependent on the view direction, the hole type and the corresponding diameter – a symbolic and non-true scale display can be realized as well. The actual display in the drawing is determined by blocks to be assigned to.
Hole Display
Indicates the currently selected hole display style. The selected hole display style is edited independently for plan view and view on a hole. Then, a list appears with the assignments of diameters to display.
Block Path
The path where the blocks for hole display have been stored.
Bitmap
A symbol, which facilitates the recognition of the corresponding style in the selection list Saves the current definition in the drawing and in a file; when you modify the style and you leave the page without saving, you are asked whether you want to save the modifications. Permits loading the current style definition from a style file; all current definitions of the current style will be overwritten.
Page C.17 - 1
Hole Display
Processing of Hole Display Style List A complete hole display style consists of a list of entries allowing to assign the hole diameters to the desired display. It is also possible to define a value range for the diameter to show e.g. all holes between 12 and 16 mm with the same display.
The current data record is edited. Then a dialog opens to select the blocks for the different hole types.
Click on this button to add a new entry at the end of the list that can be processed. Click on this button to remove the selected entry from the list.
Page C.17 - 2
Hole Display
Processing of Hole Style Entry Here, you assign the different blocks for each diameter range that have to be used for visible and hidden holes. Each kind of hole can have its own variant.
Min. Dm
The minimum diameter from which on the selected display will be used.
Max. Dm
The maximum diameter up to which the selected display will be used.
Visible
Here, you select the block to be used for displaying the different hole types Normal, Countersunk, Step and Threaded Hole if the hole is a visible hole in the drawing.
Hidden
You select the block to be used for displaying the different hole types Normal, Countersunk, Step and Threaded Hole if the hole is a hidden hole in the drawing.
Page C.17 - 3
Hole Display
Style Management In this part of the dialog, your hole styles are maintained. You can create new styles, load, update and delete styles.
Click on the displayed button if you want to create a new hole style. Then, the style is saved with pre-settings in the hole style list as *.sty-file. Now you can work with this style on all other pages of this dialog. When you want to work with a special style which is not saved in the drawing, but on the hard disk, you can load this style using this function. Select the corresponding *.sty-file in the hole style list and load the file. The style is immediately at your disposal. This function allows you to remove a style which is not needed any more in the drawing.
Page C.17 - 4
Hole Display Click on this button to modify the display order. The display order of the style list is not sorted, but you can define the sorting yourself. Use the two arrow keys to move the checked style up or down the order. This function allows you to update the styles loaded in the drawing. All styles in the drawing are replaced by the styles stored on the hard disk.
Page C.17 - 5
Hole Display
Page C.17 - 6
Automatic 2D-Cut
C.18 Automatic 2D-Cut This function helps you to define 2D-cuts in components of the model. When detailing, these cuts can be displayed and dimensioned automatically as separate details. You may exactly define where cuts are required unless they had been inserted automatically during modelling. This function doesn't create the cut itself. You only define where, which direction and how deep a cut has to be displayed later. In contrast to the manual cuts which are inserted in a finished detail by means of the command->'Insert 2Dcut', here you have the advantage of automatic positioning and dimensioning of the cuts. They will be up-dated together with a drawing-update.
Add Cut After having loaded the function, you first have to select the shape, where a cut is to be inserted. Then, you have to click a point on the cutting plane. The cutting plane will always run through this point perpendicular to the center line. Finally, you are asked for depth and direction of cut, which will be defined by clicking on another point. On one hand, you indicate the view direction of the cut and on the other hand, you determine its depth (this point will also be perpendicular to the center line). The resulting cutting planes will be displayed dynamically during selection for control reasons. The depth of the cut decides how much of the components situated behind the cutting plane is to be displayed.
Page C.18 - 1
Automatic 2D-Cut
Modification of Cut Cuts can be modified or deleted from Shape Properties.
Actual ... From
Here, you see the number of cuts existing in the shape as well as the number of the current cut.
Active
If this field is checked, the cut will be taken into account during detailing. It is possible to exclude a cut without having to delete it.
Cut Depth
Here, the depth of the cut can be modified. Alternatively, this can be done by using the AutoCAD-grips on the cut-symbol which are displayed when the cut is selected.
Alignment
Here, you enter the view direction of the cut. Shape direction: The cut runs from the indicated cutting plane in shape direction. Opposite direction: The cut runs from the indicated cutting plane opposite to the shape direction. Cutting plane always remains at the same position. If you want to reverse the cut completely, select the option „Turn Round‟.
Zone
This option hasn‟t any meaning here. It is provided for the extension ProConcrete 3D.
Page C.18 - 2
Automatic 2D-Cut
Create Cut
This option hasn‟t any meaning here. It is provided for the extension ProConcrete 3D. Click on this button to delete the selected cut from the shape.
This button exchanges insertion point and back limit point. This means that the cutting plane now is the end of cutting depth and the end now is the cutting plane.
If you defined more than one cut, you can change to the next cut by using this button. If you defined more than one cut, you can change to the previous cut by using this button.
Page C.18 - 3
Automatic 2D-Cut
Page C.18 - 4
Flatten Viewport
C.19 Flatten Viewport By using the command PS_VIEWPORT_FLATTEN you can make display a viewport with hidden edges in the layout area of AutoCAD. The output can also calculate hidden Xrefs which may neither be nested nor scaled.
Name
Any name with which the viewport can be displayed in later versions in the DetailCenter as well.
Ident
Handle of the viewport
Part Selection
Here you predefine the kind of part selection for output. Manual Selection –at output, you are asked to select the parts which have to be visible later in 2D-output. Automatic Selection (recommended) – the program automatically determines the component parts visible in the viewport and carries out a flatten viewport command. The output is cut off at the borders of the viewport, the visual depth of the viewport is taken into consideration, here. With Selection Set – You specify which component parts have to be adopted into 2D-depiction using the + and – button. All Component Parts – All component parts being in the model area of the drawing will be selected for output. Any possibly existing XRef‟s will always be completely selected as well in all cases.
Output
You can realize the output either in model or in paper area. We recommend output in paper area.
Page C.19 - 1
Flatten Viewport
Switch off Layer
After the 2D-output was created, all layers in the viewport are switched off except the layers required for the depiction of 2Doutput. Click on this button to add or remove component parts to/from selection set for 2D-output.
Click on this button to carry out the calculation of the hidden edges. This button is only visible after selection of a valid detailing style. Click on this button to delete again the drawing elements which had been newly generated together with the creation of the hidden edges. The layers in the viewport are switched on again.
Here an example for output with automatic selection in paper area. The position numbers were inserted into the drawing before in paper area.
Page C.19 - 2
Flatten Viewport
Select Detailing Style The selection of a detailing style is the prerequisite for a correct derivation of the drawing. Here, you specify colours, line types, center lines, etc. If it isn‟t yet possible to select a detailing style in the list, you first have to create or load a detailing style by means of the DetailCenter.
Detailing Style
Here, you specify the detailing style to be used for displaying the hidden edges.
Page C.19 - 3
Flatten Viewport
Page C.19 - 4
Miscellanous
D Miscellanous
Page D - 1
Miscellanous
Page D - 2
User-Defined Component Parts
D.1
User-Defined Component Parts
D.1.1 Special Parts It may be that you don‟t want to display detailed component parts, but you need the parts list information nevertheless. Or, you want to display certain elements, which have not been created with ProSteel, as a block and you want their parts list data in your model as well. By using the special shape command, you can add parts list information to any existing component parts. You only have to select the parts in question. After having selected the command, you can select the component parts directly or you can create a block from these parts by pressing ESC. Then, you select the parts and define the insertion point of the block. When you keep the ALT-key pressed while calling the function, you can create several special parts with the same properties. After that, the following dialog appears:
Here, you can enter your parts list data and then, this part will be recognized as ProSteel component part. You can modify this property using the properties command. You can use it at positioning and in the parts list as well. However, a 2D-depiction cannot be generated when no volume parts are contained.
Page D.1 - 1
User-Defined Component Parts Special Shapes By using the special shape management of ProSteel, you can add your own custom shapes to the program which will then be processed like pre-defined standard shapes. These special shapes can be saved in any number of catalogues containing any number of shapes, i. e., you can establish same sorting as with standard shapes. The selection menu then shows catalogue names as a shape type and the shapes contained in each catalogue appear as shape size, making it easy to choose between different system shapes. You can create special shapes as combination of existing shapes or by using a drawn cross-section or a variant (qualitative generation instruction) with corresponding data base.
Create and Manage Special Shapes The program once again manages these shape catalogues in four special shape master groups, which all basically have the same properties and are consequently described together in this chapter. There is a distinction between general special shapes, roof-wall shapes, combination shapes and weld shapes. You create the first two groups by drawing a cross-section; for combination shapes you combine existing shapes to create a new shape (e.g. two U-shapes welded together). The weld shapes are created using a special dialog.
These are two examples of possible special shapes. The left shape was drawn as a cross-section and then stored as a special shape, the right one is a combination of two U-shapes.
Page D.1 - 2
User-Defined Component Parts In addition, you can store each shape in three different display modes (low, normal and high – which must be created individually). You thereby avoid having to deal with a confusing number of lines when working with rather complex shapes like in the left example, but you can show the complete shape if needed. Nonetheless, you can always select the ProSteel standard display modes (only center line, envelope, etc.) without having to change any parameters. Here, you see the dialog for special shape management. It is organized in a tree structure and consists of 4 main tabs for the different types of special shapes.
Each of these branches can contain subordinate directories and each subordinate directory can have any number of special shape definitions. However, you cannot make any further subordinate division. Select a shape and the stored cross-section will be displayed on the right monitor. Creation of a Catalogue Select one of the tabs to layout a catalogue and use the right mouse button. A subordinate menu is displayed offering you the option to layout a catalogue. A subordinate directory is created and you can edit the name. Creation of a Special Shape A special shape layout is made analogously to the layout of a catalogue. Select the desired catalogue and use the right mouse button. Then, you can select the option Layout Shape. Enter the name and the shape appears as an entry. This name is the access name and not the name, that later will be displayed in a parts list.
Page D.1 - 3
User-Defined Component Parts Please note that until now you only created a blank cover that has to be filled with creating a resolution. It is not before then that the special shape has been filed. If you don‟t do that, the blank shape cover will be removed at next selection. Layout of a Depiction Resolution After the layout of a blank special shape definition has been affected, you have to define a resolution. Select the shape and use the right mouse button again.
Here, you select the desired resolution. If resolutions have already been defined for the special shape, you can modify the defined resolution using this method. Definition of Cross-Section Defining the closed and the not crossing contour of the cross-section normally creates a special shape. Depending on the setting, this can be done using polylines or individual lines and arc segments. Alternatively, you can define special shapes of regular wall thickness (e.g. cold rolling shapes) by means of an open poly-line and by specifying the thickness. See „Settings‟.
Page D.1 - 4
User-Defined Component Parts After selection, choose your outer contour and the possibly existing inner contours. You can utilise any number of inner contours that must not cross the outer contour and must not have any intersection points between each other. Now, the program automatically calculates the possible standard insertion points of this shape (center line, envelope). Finally, you can still define a center line which can be used alternatively and further insertion points.
After end of the geometrical definitions, now the property dialog for specifying the parts list data will be displayed. Enter the name of the parts list, notes, material, etc. Starting from the cross-section drawing and the entered material data, the program calculates the weight in kg/m and displays it in the entry field Weight. You can determine which shape data will be applied to the standard parts list. It is also possible to change the calculated weight. When you have defined a user-defined center, you also specify here whether it is used to determine the center line or whether the calculated center line has to be used.
Then, the special shape is saved and can be used by you in the 3D-model. As you can see, the defined resolution is displayed. You could repeat this procedure with different resolutions or modify any existing resolution afterwards as described above.
Page D.1 - 5
User-Defined Component Parts
Settings
Selection Mode Here, you specify whether the contour selection has to be effected via an existing poly-line or via selection of individual segments. Shape Thickness When you have selected an open poly-line, the contour will be created along the poly-line with the indicated thickness. The poly-line is the neutral fibre. Shape System
Page D.1 - 6
Here, you select whether the following created shapes have to be available only for steel (ProSteel), only for concrete (ProConcrete 3D) or for both applications.
User-Defined Component Parts
Roof-Wall-Shapes The creation of roof-wall-shapes is identical with the creation of general special shapes. The only purpose for dividing them is to have a clearer survey and still another feature of differentiation.
Combination Shapes Combination shapes are not created using poly-lines or line elements. You have to arrange the shapes in the WCS in the way they have to be built later for definition. The best is to apply short shape pieces (e.g. with a length of 100 mm) in the cross-section. Please note, however, that they mustn‟t be mirrored.
The definition of a combination shape is analogous to that of the other special shapes, with the exception that you are not asked for poly-lines but for the shapes contained. Select the decisive shape first, and then the other ones. An inserted combination shape has the same properties like an individual shape. In contrast to standard shapes, you can dissolve the combination shapes into their individual parts and any processing of the individual segments is kept. Combination shapes are especially suitable for planning tasks or for tasks where several partial shapes have to be processed analogously (such as e.g. at the construction of fronts of buildings).
Page D.1 - 7
User-Defined Component Parts
Special Shapes Via Variant and Database The creation of special shapes via drawing a cross-section is especially suitable for individual types that cannot be summed up in special shape series or, for types where you only need some special shapes for your construction. However, if you require whole shape series of similar types, which only differ in their dimensions but the quality, of which is identical, it is recommended to create them via a variant with corresponding database. Using this method, you only determine how the shape has to look like in a description file by describing a polygon with variables. This means you describe a shape like “line from point (0, 0) to point(a, b)" etc. and then define the values a and b in a DBASE-file. If you enter 10 different data records with names and variants for a, and for b, you will immediately obtain 10 different shapes which are similar to each other. Create Variant Please also read through the section about the standard method via a drawn poly-line, because basic information about special shapes is not described once again here. To create a variant, you have to create a new file tab in the special shapes directory (...\sopro) first. The name of this file tab simultaneously defines the “shape type”, which will be displayed later in the selection lists for shape selection. Now, this file tab has to contain an ASCII-file with the name rules.dat. This file contains the variant description and the corresponding DBASE-file (*.dbf), the name of which can be freely determined. In the variant file you enter this name explicitly. Hint: Please note that there mustn‟t be a common special shape file (*.psp) in this tab. You can create a shape of the same type designation only via the standard method or via a variant. Structure of Variant File (Geometry) All commands in this file have to be entered in capital letters, and the order specified here has to be kept. The values for x and y can either be pre-defined or be values from the database. If you want to apply a value from the database, you define continuous variables $1, $2, $3 etc. for this purpose, which will then be replaced by the values of the data records. You can indicate all three-resolution variants in one file.
Page D.1 - 8
User-Defined Component Parts
FILE=TEST.DBF
Enter the file name of the corresponding database file.
RESOLUTION=NORMAL;
Enter the display variant LOW, NORMAL or HIGH.
THICKNESS=5.0;
Optional entry, see command description
STARTPOINT(x, y);
Starting point of the outer poly-line ..further polygon description
STARTPOINT(x, y)
Starting point of the 1st. inner poly-line ...further polygon description
INSERTPOINT(x, y)
Additional insertion points, up to 16 pcs. You can only define one set of insertion points, i. e. you cannot define 16 points for each resolution!
RESOLUTION=END
End of a depiction variant
RESOLUTION=LOW
New depiction variant, if required ...
RESOLUTION=END
For the description of the polygon segments, commands for lines and arcs are at your disposal which can be described with relative or absolute coordinates. LINEAR_TO(dx, dy)
Line segment from the last indicated point in relative coordinates x and y (analogously to AutoCAD-line input)
LINEAR_AT(x, y)
Line segment from the last indicated point in absolute coordinates x and y (analogously to AutoCAD-line input)
ARC_TO(r, phi)
Arc segment from the last indicated point, tangential at this point with the indicated radius r and the arc angle phi in degrees. A positive angle causes a rotation to the right, a negative angle causes a rotation to the left.
Page D.1 - 9
User-Defined Component Parts
ARC_AT(cx ,cy, ex, ey)
Arc segment from the last indicated point, tangential at this point with the indicated center point cx and cy as well as the end point ex and ey in absolute coordinates each.
Normally, the special shape is described using one or more closed poly-lines. However, an easier description can be selected for thin-wall-shapes (cold-rolled shapes in most cases). You can specify the wall thickness d by indicating the command THICKNESS=d and only have to describe the neutral fibre (open polygon) of the cross-section. The program then automatically calculates the required closed polygon. Create Database (Shape Sizes) In the database, a common DBASE-file, you only have to file the data records of the different variables and some information about the parts list. Field
Field Name
Field Type
0
KEY
Text
1 2 3 4 5
NAME NOTE1 NOTE2 ITEM MATERIAL
Text Text Text Text Text
6 7 8... n
WEIGHT FIELD1 FIELD2 ... n
Double Double Double
Page D.1 - 10
Content
ProSteel-shape designation (access key) Shape name (display, parts list) annotation field 1 annotation field 2 item number Material index, not implemented at the moment weight per meter value of the first variable ($1) value of the next variable ($2...$n)
User-Defined Component Parts
D.1.2 Weld Shapes Weld shapes consist of several plates welded together to a shape cross-section. In most cases, they are considered as one shape at construction. In principle, they are some kind of combination shape consisting only of plates. As it is the case with the other special shapes, weld shapes are managed in catalogues as well. Thus, you may refer to the essential information there with regard to catalogues; shape names and parts list entries. Two different kinds of weld shapes are managed by ProSteel. Standard Weld Shapes Standard weld shapes can have any plates at any positions. You can create box shapes, U-shapes or others using these shapes. The shapes have a constant cross-section and can be adapted via the slope. I-form Weld Shapes I-form weld shapes consist of three plates that are organized like an I-shape. These plates can b e individually adjusted. However, the greatest advantage of this kind of weld shapes is that the web plate can be individually adjusted. Even very complex weld constructions can thus be depicted via a shape.
Page D.1 - 11
User-Defined Component Parts
Creation of Weld Shapes If you want to layout a subordinate directory under the main tab and create a shape there, you can select between a standard shape and an I-shape. Standard Weld Shapes Here, you can specify and change the shape contour. In addition, you can add plates and determine their position either relative to the origin or relative to other plates. When you leave the dialog with the OK-button and enter the parts list data, the weld shape will be created.
Click this button to add a new plate to the current definition.
Click this button to remove the currently selected plate from the definition.
The previous plate is checked as currently selected plate.
The next plate is checked as currently selected plate.
Page D.1 - 12
User-Defined Component Parts
Act
This option displays which plate is checked as current plate at the moment. There is a separate display on the monitor.
From
The number of plates is displayed.
Width
The width of the current plate is indicated.
Height
The thickness of the current plate is indicated.
Item
The item number of the current plate is indicated.
Material
The material of the current plate is indicated.
Treat Parts..
If this option is activated, the shape is treated like the contained individual parts at positioning, parts list and detailing. You have access to the subordinate properties of each single plate without having to explode the shape.
Check Flats
When you dissolve the shape, it is verified whether flats can create the included sizes. Then, flats will be created instead of poly-plates.
Monitor Point
Here, you can define whether you want to see and modify the insertion points of the current plate or whether you want to see and modify the insertion points of the reference plate. The current plate will be aligned correspondingly.
X-Pos
The x position of the insertion. This can either be relative to the origin or to an insertion point of a reference plate.
Y-Pos
The y position of the insertion. This can either be relative to the origin or to an insertion point of a reference plate.
Rotation
The rotation of the plate around its insertion point.
Insertion Point
Depending on the setting, you can see here the insertion point of the current plate related to the reference point or the selected reference point at the reference plate.
Relative to
If this field is checked, the insertion point is relative to a reference plate.
Element
The number of the reference plate.
Pos
The number of the insertion point of the reference plate.
Page D.1 - 13
User-Defined Component Parts
Create Weld Shapes I-Type Here, you can specify the dimensions, item number and the material of the three plates. You cannot configure as you like but you don‟t have to place the shapes in their position.
Top Flange
Specifications for the top flange
Bottom Flange
Specifications for the bottom flange
Web Plate
Specifications for the web plate
Treat Parts
If this option is activated; the shape is treated like the contained individual parts at positioning, parts list and detailing. You have access to the subordinate properties of each single plate without having to explode the shape.
Create Flange
If you dissolve such a shape and you have modified the web in a way that the flanges have to be bent, they normally are built like arc shapes. If this option is activated, straight flange segments will be created.
Check Flats
When you dissolve the shape, it is verified whether flats can create the included sizes. Then, flats will be created instead of poly-plates.
Page D.1 - 14
User-Defined Component Parts
D.1.3 Parametric Shapes Apart from the special shapes defined as poly-line in the cross-section, parametrically defined shapes are available as well. The size of these shapes is defined by means of the shape‟s base type and by some variable parameters. Parametric special shapes are created in the shape manager.
At the very moment, 34 shape types to be processed and created are available in all for selection.
Page D.1 - 15
User-Defined Component Parts A Z-Shape is described here as example:
Each number indicates a parameter the value of which is entered in the dialog. By means of preview, you can control at any time how your shape has to look like. Afterwards, the shape can be saved and the properties of the special shape can be indicated.
Page D.1 - 16
BlockCenter
D.2
BlockCenter
BlockCenter is an effective tool for creation and management of any blocks within ProSteel. If you are working e.g. with system constructions which together with individual adaptations form your final project, BlockCenter gives you fast access to these prepared constructions. As it is a matter of ProSteel-blocks, the behaviour of these construction groups after insertion is the same as if they have just been created out of individual components. Of course it is also possible to manage any 2D-blocks by means of the BlockCenter or to add these blocks to your shop drawings (e.g. special labelling fields for your customers, recurring details of construction, and so on). Within the BlockCenter, you will find a great number of useful functions for your working with blocks. In addition, there is also an efficient database included allowing a classification and later search for the required 3D- or 2D-blocks. Here, you see the two BlockCenter dialogs (navigation dialog on the left, selection dialog on the right) together with a ProSteel-drawing:
Page 0- 1
BlockCenter
D.2.1 Structure of the BlockCenter Very similar to the DetailCenter, the BlockCenter, too, consists of dialogs which may either be docked on the left or on the right of AutoCAD or which may be positioned anywhere on the screen. When the function is loaded, two dialogs are displayed. The dialog on the left only serves for navigation, whereas the dialog on the right serves for selection of the blocks. Then, all functions are loaded via context menus of the right mouse button, except for the basic settings of the BlockCenter. These are reached via the tool button on the upper left of navigation dialog. If one of the two dialogs isn't needed for current work, it can be hidden temporarily. It can be activated again by means of the remaining dialog. BlockCenter function isn't finished unless both dialogs are closed or navigation dialog is closed by means of the "Close"-button (x) on the upper right of the dialog.
Navigation Dialog In a tree structure, all existing block directories or groups are listed in navigation dialog. You can either choose a display reflecting the directory structure of your hard disk or a user-defined display. Sorting of the user-defined display can be designed freely to a large extent and then saved as a template (see function >'Template'). In addition, you may set different display filters. Navigation dialog is used when: - The current block directory (or block group) is modified - A directory is created or removed from hard disk - Blocks are created - The database structure is revised - The sorting of the display is changed. If a block group (e.g. system construction XYZ) has been selected, you also could hide this dialog to gain more space for construction on your screen.
Page 0 - 2
BlockCenter
Selection Dialog In selection dialog, all blocks existing in the selected directory (or in the selected block group) are listed. They are displayed together with the drawing name and a preview. Of course it depends on the settings of sorting and filters in navigation dialog which block drawings are finally offered for selection. Selection dialog is used when: - a block is inserted into a drawing - an existing block is modified or deleted - the search data (classification) of the block are entered or modified The figures of preview are created by AutoCAD during saving of a drawing and show this drawing including current zoom setting at the moment of saving. Apart from scaling of size, you don't have any further influence on the display within the BlockCenter.
Database In contrast to other ProSteel-functions, where all required data are stored in the drawing, BlockCenter is working with an additional database. The advantage of this database is that the blocks, especially if there are a great number of blocks, available at once after the function has been loaded. Neither a prolonged search in the directories nor a query of drawing data is necessary any more. In addition, user has a greater influence which drawings are integrated into the BlockCenter and which ones are not integrated. The database format was developed for the BlockCenter and permits fast access to all data required for sorting and selection. The additional content of the database (user-defined database fields) can be designed as you like. You may decide yourself which data fields are used to classify your blocks for selection and search and how they have to be named. Different properties of the block drawing are already taken from the drawing when a block is created (or even at a later time) and entered in previously defined database fields. Some search criteria will be available at once. If these fields are not required, they can of course be removed from the database.
Page 0- 3
BlockCenter
D.2.2 Creation and Edition of Blocks There must be blocks contained in the BlockCenter to be able to work with it. Blocks are individual drawings existing on the hard disk, which then may be inserted into other drawings. It is possible to insert existing drawings or to create new blocks by means of the BlockCenter.
Creation Select the option directory structure as display for the creation of a block. Now check the directory where the block has to be stored in navigation dialog and select the entry create block via context menu. Select all components of the model which have to be adopted in the block and pick the main insertion point of the block. Finally, you are asked for the alignment of the block to allow insertion with correct alignment afterwards: When you select ESC, the correct UCS will be used. Alternatively, it is possible to pick a point on the later x-axis as well as a point on the x/y-plane. Please note, however, that at later insertion the block will automatically always be aligned in a way that the coordinate system pre-defined here is corresponding with the current drawing UCS. It is however possible to define alternative insertion points and alignments. Now, a new drawing will be created and displayed containing the selected component parts. This drawing can be modified further as you like: you can e.g. add other ProSteel- and AutoCAD-elements or additional insertion points. Hint: As long as this drawing has not been saved, it cannot be adopted into the database. It is possible to cancel block creation. It is not before the block drawing has been stored once – which can also be done when you quit this function – that the block will be finally adopted into the database and be displayed as preview in selection dialog.
Selection Select an appropriate sorting in the settings and then check the desired block group in navigation dialog by clicking on it. Depending on the setting, this may either be a directory or any user-defined sorting criteria. Within navigation dialog, you may scroll up and down the tree structure, as you are accustomed to doing in Windows-Explorer.
Page 0 - 4
BlockCenter If you click on a new entry, selection dialog will be filled with small preview figures as well as with the file names of available blocks. Only those blocks are displayed, which have been adopted into the database and which meet the possibly activated filter condition. There may be other drawings included in the directory. Select the desired block by clicking the preview figure in selection dialog. Above the selection list, additional information on the selected block will be displayed which can also be defined freely.
Modification When you want to open an existing block for working or looking on it, select the entry Edit block in the context menu after block selection. The block drawing now is opened as new drawing that can be modified. If you want to keep the modification, the drawing has of course to be stored.
Delete Select the entry delete block in the context menu after block selection to remove a block from the database. Now, you can determine whether you only want to delete the entry in the database or also the complete drawing on your hard disk. If you don't delete the drawing, it is possible to adopt it again into the database at a later time. Any additionally entered data of this block are of course lost because they have been stored in the database and not in the drawing. Additional insertion points, are kept, because they are stored in the drawing as visible objects.
Create and Delete Directories Further directories e.g. new blocks may be created directly from the BlockCenter. Select the option directory structure as display structure and check the directory beneath which the new directory has to be created in navigation dialog. Now, select the entry create directory in the context menu and a small dialog box will be opened where you have to enter the name of the new directory. To remove a directory, select the directory to be deleted in navigation dialog and click on the entry delete directory in the context menu.
Page 0- 5
BlockCenter
D.2.3 Insert Blocks At first, select the desired block in selection dialog and then, click on the entry insert block in the context menu. Now, you can see a preview of the block, „hanging on the cross-hairs“, and you have to click on the insertion point of the block. This insertion point is the main insertion point of the block determined during block creation. Alignment is effected in a way that the block coordinate system, which was also determined during block creation is corresponding with the current UCS of the target drawing. Press ESC-key instead, if you want to cancel the insertion.
Additional Insertion Points You can add further insertion points to a block that is used instead of the main insertion point. E.g. it is possible to insert a construction at all outer points. When the block is inserted into a drawing afterwards, you can jump from one insertion point to the other by mouse click and select the desired point. Additional insertion points can be determined directly during creation. It is, however, also possible to insert them later during edition of a block. As this is a matter of visible ProSteel auxiliary objects which will be deleted automatically after insertion, you can also copy, move or delete existing insertion points by means of the standard functions of AutoCAD. Each of these insertion points is displayed as small 3D-ball the size of which is user-defined. To add insertion points, open the block drawing for edition (resp. block creation is still activated) and select the entry add insertion points in the context menu. Now you can add insertion points by clicking on a point until you end the function by pressing ESC. The alignment at later insertion then corresponds to the main alignment of the block.
Insertion Points with Alignment In addition, you can store the later alignment for each insertion point at the point itself to increase the available alignment variants. Otherwise, only the block alignment determined during block creation would be available. The block can be rotated directly during insertion. If you want to add insertion points, which at the same time contain an individual alignment, click on the entry insertion points with alignment in the context menu. After clicking on the point, you have to pick another point on the later x-axis as well as a point on the x/y-plane. Here, too, you can add points until you quit the function by pressing ESC.
Page 0 - 6
BlockCenter
Insertion via Additional Insertion Points When you defined additional insertion points for the block, you can select them one after the other. After insertion of the block by means of its main insertion point, the block is moved to the next insertion point by pressing the left mouse button. You may follow the result directly on the screen. After having reached the last insertion point, the block will again be moved to the main insertion point with the next mouse click and you can start right from the beginning.
Page 0- 7
BlockCenter
D.2.4 Display of Block Structure The basic settings of the BlockCenter, and especially the kind of sorting, can be pre-defined in the pre-settings. An appropriate sorting avoids losing track if there is a greateer number of blocks. When you click on the button on the upper left of navigation dialog, the following dialog box will be opened:
Group Block Directory Block path
here, you see the basic directory of the blocks to be managed by the BlockCenter. These blocks are stored in subdirectories. In this basic directory, you will also find the database file so that you could work with different block directories (and databases). To modify the directory, click on the button on the right of the display. Then, you can determine the directory anew via file selection dialog. Please note that the blocks may only be in subdirectories of this basic directory.
Standard fields... Here, you determine the behaviour at a database update. The meaning of the options Do not replace, Always replace and Only replace blanks is described in detail in chapter 'Update database'.
Page 0 - 8
BlockCenter
Group Options for Insertion Group objects
at insertion of blocks, the program ignores all block elements not belonging to a group. This option is, however, only valid for special insertion variants planned for future versions.
Insertion points
here, you specify the ball diameter with which the additional insertion points will be displayed.
Pattern Rotation Angle Here, you specify the angle of rotation of the block about the insertion point.
Group Display Preview
Here, you can set the height of preview windows in the display dialog.
Directory...
In navigation dialog, the block groups are displayed depending on the directory structure on the hard disk. You always have to use this sorting for the creation of new blocks, because otherwise you won't be able to determine a target directory for the block file.
User...
It is possible to create an individual sorting for the navigation dialog depending on the contents of the user-defined database fields. Sorting then will be made in an hierarchic structure in the order which is displayed in the list on the right.
ARROW RIGHT Click on this button to add a property field to the list. Then, a dialog box will be opened where the existing database fields are displayed. Select the desired field out of this list. ARROW LEFT
Click on this button to remove the checked field from the list.
Display All
At user-defined sorting, the blocks, which cannot be clearly assigned, will be displayed as well. This is the case when the corresponding field doesn't exist in the database or when it is empty. Then, the block will be assigned to a standard field of the sorting level in question.
Incomplete
At all sorting, only those blocks will be displayed the database fields of which have not been completely filled in. Thus, it is easy for you to find out whether all database fields which are used for a possible search exist with valid entries.
Page 0- 9
BlockCenter
Use Filter
At sorting, the blocks are filtered depending on user-defined criteria. Only those blocks will be displayed which meet the filter condition (and of course the sorting condition). A specific selection is made possible.
Display Filter
Here, you see the currently selected filter template. Click on the small button on the right of the information field to select a template. Please refer to chapter 'Display Filter' for a detailed description of how to create a filter template.
User-defined Sorting One important strength of the BlockCenter is the user-defined sorting according to any user-defined criteria. Fur this purpose, you can define your own database fields and fill them later with data of the corresponding block. In the settings, you may now specify a hierarchy according to which the blocks have to be displayed at a user-defined sorting. Here an example to make things clear: Let us assume that – among others – you created database fields for the shape, for the whole pattern and for the shear protection to classify prepared root points and you indicate exactly these fields in this order as sorting. If you now switch over to user-defined sorting, the tree-structure in the navigation dialog will be as follows: the contents of the field 'shape' will be displayed on top level, the contents of the field 'hole pattern' will be displayed on the following level below, and so on. For each data input, e.g. in the field 'shape' (e.g. HEA140 and HEA160) an entry will be created on the same level in the tree-structure and blocks with identical contents will be sorted there (analogously to the directories and sub-directories on the hard disk). This helps you to find out similar blocks at a great number of blocks. To avoid slightly differing entries for the same thing, all data existing for this field will be displayed in a list at data input. Assignments can be made, too. This helps you to avoid that once you enter e.g. HEA140 and once you enter HE140A.
Page 0 - 10
BlockCenter
D.2.5
Database of Block Data
Working with the database is divided into four essential parts: definition of data fields, input of actual block data, maintenance of the database and use of the data for display and filter.
Definition of Data fields Click on the entry Edit Fields in the context menu of navigation dialog to add your own fields to the database or to Edit existing fields. The following dialog box will be displayed:
Group Field Definition List
Here, you see the field names of already defined data fields. If you want to edit or to delete one of the fields, click on it for selection.
Field Name
Here, you enter the field name of the new database field. Field names always consist of capital letters (small letters will be automatically transformed) and already existing names are ignored. It is useful to enter reasonable field names as these are displayed in the selection dialogs for sorting and search. For each field a description may be added as auxiliary text for the other dialogs.
Page 0- 11
BlockCenter
Dialog Text
Here, you specify the labelling of the input field for field data in the input dialog for block data.
Description
Here, you may specify a describing auxiliary text for the database field, which will be displayed in the other dialogs at selection of this field. As you should use concise and easy field names, you can add more information to the field by this way.
Display:
The data of the database field will be displayed in selection dialog after selection of a block. This helps limiting the display to some essential fields in the case that there is a great number of data fields.
Group Data Text Field
Data are evaluated as mere text. Sorting is made in alphabetical order so that the entry "11" would be sorted in front of the entry "2".
Integer
Data are evaluated as integer. Here, the entry "B2" would be sorted in front of the entry "A11" because the numerical part has priority.
Floating Point
Data are evaluated as float. If the imperial unit system is used, the units inch and foot will be displayed correctly.
Floating Point (fix) Data are evaluated as float. If the imperial unit system is used, the units will not be displayed in inch and foot (e.g. for angles).
Command Names of the Dialog INSERT Click on this button to add the defined database field to the database or to modify an existing one. Please note that it is not possible to modify a field name. If you select an existing field and you modify the field name, the program assumes that a new field has to be created. DELETE Click on this button to remove the selected database field from the database. Please note, however, that all existing block data referring to this field will be deleted as well.
Page 0 - 12
BlockCenter
Input of Block Data After having defined the database fields, you can enter the corresponding data for each created block. In order to do so, click on the entry Edit block data in the context menu of display dialog or double-click on a preview window in the display dialog. Then, a dialog box opens where you can enter the data. It can remain open even if another block is selected. In this dialog, you will find a list of existing database fields. The size of the dialog depends on the number of fields. Enter the desired data in the input fields or select an entry from the list of existing data by clicking on the arrow on the right of the input field. When working with the lists, you avoid different entries for the same thing, which facilitates later searching.
Command Names of the Dialog MODIFY Click on this button to take over your entries or to modify already existing data.
Page 0- 13
BlockCenter
Pre-defined Data fields To facilitate the acquisition of standard data, certain pre-defined data fields (standard fields) will be created at the creation of blocks, the contents of which can be automatically taken from the drawing. These data fields are managed in the same way like any standard user-defined data fields and therefore can be modified or deleted, too. If one or more of these data fields are deleted, they won't be taken into consideration any more at database update or at the creation of blocks. To restore these fields, it is necessary to re-structure the database or to create the field manually together with the exact name.
Automatic Creation of Database At first start of the program or at modification of block directory, it may be that there isn't yet any database existing. In this case, a blank database is always created to adopt blocks. The program offers you to search in the block directory including all subdirectories for drawings and to adopt them into the database. This allows you to manage even earlier created blocks via the BlockCenter. When you give a negative answer to this query, only those blocks are displayed which will be created later with the help of the BlockCenter – even if there are still other drawings in the directories. It is possible to create a complete new database at any time you like.
New Creation of Database At any time, it is possible to replace the existing database by a new one without having to delete the database file. Just click on the entry Create database new in the context menu of navigation dialog. Now, the program searches in all subordinate directories for drawings to be adopted into the database. Important hint: Please note, however, that all user-defined data fields and the corresponding existing contents will be lost! A new database will be created containing all drawings and blank standard fields existing in the directory.
Page 0 - 14
BlockCenter
Update of Database Click on the entry Update database in the context menu of navigation dialog to update an existing database. In this case, the program searches for drawing files, which don‟t exist any more in the block directory, and removes them from the database. At the same time, new drawing files and sub-directories will be adopted into the database. At update of the database, the entered data and modifications of data fields are kept. You may define via pre-settings what has to be done with the standard fields during update. When the option 'Don't replace standard fields' was selected, no entries in the standard fields will be modified, i.e. new drawings won't be examined either. When the option 'Always replace standard fields' was selected, all drawings will be searched for standard data and any possible modifications will be lost. When the option 'Only replace blank standard fields' was selected, newly added drawings will be examined, as their standard fields are still blank. All others won't be taken into consideration. When some standard fields were removed from the database, they won't be restored during update. By means of update, it is, however, possible to make sure that modifications in the block files will cause an update of the remaining standard fields. The program assumes that deleted standard fields won't be required any more. Please note that each drawing in question has to be opened for update in order to determine the drawing data. This process may require some time until it is finished.
Page 0- 15
BlockCenter
Display Filter Another strength of the BlockCenter is the display filter according to certain search criteria. Before the blocks are displayed in the selected sorting, the program first checks whether each single block meets the filter conditions on the basis of its database entries. For this purpose, logical links may be created between the existing data fields and their contents. There is no limit concerning the complexity of the query. Different filter combinations can be stored as templates and then defined as activated filter in the settings for the sorting. You may e.g. specify that only blocks having holes will be displayed if they have 4 enforced holes. Then, the neighbouring figure will show you the result of filtering at a given sorting according to shape, hole pattern and if they are enforced. To be able to work reasonably with the filters, user should have a certain mathematical understanding of logically linked notions. It is very easy to create a filter condition never producing any positive result at all in combination with the existing data – a corresponding check doesn't take place.
Boolean operators Simple queries only consist of one comparing condition such as e.g. whole pattern = 4. It is, however, the logical link between several comparing conditions, which is really interesting. Therefore, you may specify a logical operator by means of which the next inserted comparing condition shall be linked with the existing condition. To facilitate input, previous pairs are automatically put into brackets, in case of a change of the operator. It is possible to create search queries such as (A AND B) OR (A AND C) in an easy way. A, B and C here are variables of simple comparing conditions of data field, operator and content. An existing term can be manually put into brackets, too, if the condition is not in pairs. The following condition serves as example: ((A AND B) OR C) AND D.
Page 0 - 16
BlockCenter
Define Filter To define a filter term click on the entry Edit display filter in the context menu of navigation dialog. The following dialog box will be opened:
Group comparable term List
Here, all user-defined database fields are displayed which may be used for the search criteria. Each field may be used as often as you like. Select the desired field by clicking on it in the list. Then, the field name will be displayed on the right. In the information line, the auxiliary text for this field will be displayed containing more detailed information on the data field.
Display fields
here, user presets an individual comparing condition consisting of field name, comparing operator and block data. Logical operators to form the complete filter condition can combine several comparing conditions.
> Left
The current database field, which can be modified by clicking on it in the list.
> Operator
Here, the comparing operator is selected linking the database field and the block data (content of the field) to build a comparing condition.
Page 0- 17
BlockCenter
> Right
Possible block data (contents of the field) of the selected data field in a dropdown-list. Impossible comparing conditions will be avoided.
After all three components of a comparing condition were preset; you can add this condition to the complete filter condition by clicking on the INSERT button. Depending on the existing conditions and selected logical links, appropriate brackets are set by the program. Group Filter Condition Display field
the complete filter condition, if need be, as logical link consisting of several comparing conditions. If a comparing condition has already been inserted, the activated logical operator of the following comparing condition will be displayed as well.
Command Names of the Dialog OPERATOR AND Click on this button to select the logical operator AND as logical link for the following comparing condition.
OPERATOR OR Click on this button to select the logical operator OR as logical link for the following comparing condition.
BRACKET Click on this button to force the program to put the existing filter conditions into brackets manually. Brackets are always necessary when the complete result of a (partial) condition has to be linked with another, as the combination of (A AND B) OR C is different to A AND (B OR C). INSERT Click on this button to add the current comparing condition to the complete filter condition.
Page 0 - 18
BlockCenter
DELETE Click on this button to delete the comparing condition, which was added last.
DELETE ALL Click on this button to delete the complete filter condition.
Use Filter Templates As you already know from nearly all other ProSteel functions, the filter conditions, too, may be stored as template. Then, the filter can be used in the settings of the display via the name of this template. Don't forget that this is only a hint. If the filter template is modified, the display template, in which this filter was used, will probably produce another result, too.
Page 0- 19
BlockCenter
Page 0 - 20
Roof/Wall Panels
D.3
Roof/Wall Panels
This command allows you to divide any surface with roof-wall shapes and display them in colour. You choose orientation and grid spacing. The program then determines necessary cut-outs in the shapes. You can work with all shapes, including special shapes and plates. Layout is done on the active UCS plane. It is recommended to use a top view of the UCS plane.
Surface Layout To divide a wall surface by means of front shapes, outer bordering of the surface as well as possible inner cuts have to exist as poly-lines first. After having loaded the function, click the Outer Poly-Line of the Surface first and then the direction determining line for alignment. Now, pick the Origin of Division and the following dialog appears for further specifications:
Page D.3 - 1
Roof/Wall Panels
Max. Length
Here, you are prompted to indicate the grid length (i.e. the lengths of the shapes to be installed).
Grid Width
Here, you are prompted to indicate the grid width. If the grid width exceeds the shape width, the layout will show gaps - if the grid width is smaller, you will have overlaps. In the neighbouring input field, the shape width of the currently selected shape is displayed (see „Shapes‟ tab).
Depth
Here, you enter the distance between layout and active UCS plane. By entering positive values, you move the surface along the positive Z-axis of UCS.
Offset Top
Here, you enter a projection of the shape over the grid length at the upper end. If you enter a positive value, the shape is shortened and a gap is shown. If you enter a negative value, the shape is extended and overlaps with he next grid element.
Offset Bottom
Here, you enter a projection of the shape over the grid length at the lower end. If you enter a positive value, the shape is shortened and a gap is shown. If you enter a negative value, the shape is extended and overlaps with the previous grid element.
Offset Side
Here, you enter the dimension by which the shape insertion points to be moved horizontally from the center of the grid.
Dynamic
The command automatically reacts to a modification of the polygon.
Cut
If this field is checked, the shapes, which are longer or wider than the outer poly-line, are cut at this poly-line.
Offset
Here you enter how grid lines are moved against each other in longitudinal direction. No offset means that they are not moved. Centered offset means that they are moved in a way that a new line begins in the middle of the previous line (“laid brick pattern”). Dimensions mean that the lines are offset against each other by a value you entered in the neighbouring input field.
Page D.3 - 2
Roof/Wall Panels
Colour Normal
Select a colour for all shapes not being cut by entering the AutoCAD colour code. The colour can also be selected by clicking the BUTTON which is situated at the right.
Colour Cut
Select a colour for all shapes being cut by entering the AutoCAD colour code. The colour can also be selected by clicking the BUTTON which is situated at the right.
Original Colour
Using this option resets the colours to their original values after the dialog function has been finished.
Shape Selection Choose the component parts to be used for installation on the second page.
Shapes
Unless having checked ‚Use Poly-Plates‟ field, you select here the shape to be used for installation. You can select the shape according to the shape categories in the lists.
Page D.3 - 3
Roof/Wall Panels
Plates
If the ‟Use Poly-Plates‟ field is checked, a rectangular polyplate is used as installation element instead of a shape. You can determine the dimensions in the Plate Width and Plate Thickness input fields, the length corresponds to the „Grid Length‟ corrected by the offset value. You can specify a name for the plate in the selection list. If the Grid field is checked, a plate grid (e.g. for a grating at the installation of stage coverings) is created for being displayed.
Poly-Cuts You can enter additional cut outs into a surface at which the shapes have to be cut as well. In order to do this, the poly-lines of the cut outs are required which can, however, still be drawn when the function is activated.
Poly-Cuts
Page D.3 - 4
Here, you can see the number of additional cut outs existing at the moment.
Roof/Wall Panels
By clicking this button, you can insert a cut out into the division. Click the poly-line of the cut out in order to do so. If the poly-line doesn‟t yet exist, you can draw it directly before loading this option. By clicking this button, you can delete the currently selected cut out and close the surface at this position. If you have several cut outs in the division, you can select the required cut out by pressing „„. Here the example of a gable wall automatically lined with wall facing elements. The dark surfaces show the elements that do not have to be cut out; the light surfaces have to be cut out. In addition, 2 openings have been inserted.
Page D.3 - 5
Roof/Wall Panels
Page D.3 - 6
Dispatch Bolts / Blocks
D.4
Dispatch Bolts / Blocks
Use this command to distribute as many AutoCAD blocks as desired evenly across a shape length and add their insertion points as markings to the shape (e.g. for NC-output). Of course, you can just add markings without inserting a block. In addition, the function allows for the parametric generation of thread bolts or similar solids of revolution at simultaneous distribution analogously to the distribution of blocks described above.
Page D.4 - 1
Dispatch Bolts / Blocks
D.4.1 Insertion of Thread Bolts Apart from manual input, you can save the definitions of thread bolts in a data base (*.dbf) as well. This database has to be indicated in your configuration file of ProSteel. The entries then are displayed there and are available for selection.
Group Distances Spacing
Here you enter the distance between the individual insertion points.
Front Offset
Here you enter the distance from shape start to the first insertion point.
End Offset
Here you enter the distance from last insertion point to the end of the shape.
Page D.4 - 2
Dispatch Bolts / Blocks
Insertion Rules
Since in most cases the length of a shape does not coincide with the settings, you can define the rules for distribution here. End Dimensions – The margin dimensions are exactly adhered to and the internal distance is averaged. Inner Values – The inner values are adhered to and the margin dimensions are averaged. Centre Inner Values - The inner values are adhered to and the rest is evenly distributed at the front and at the back. At Plate Drilling – This option is especially meant for distribution of anchor bolts or similar things at base plates. The parts are aligned at the existing drillings and fixed below a plate. Pick at Plate – You select the insertion points of the component parts within the plate. Position and height are determined from the plate.
Hole Dia.
You enter the diameter of marking or nipple hole.
Slot Length
You enter the depth of marking or nipple hole.
Group Options Shape Center
The markings are attached to the center of the selected shapes.
Create Marks..
The marking or nipple holes are attached.
Lower
The component parts are attached below the plate.
No Detailing
The component parts inserted here are not detailed in the DetailCenter.
Insert Blocks
The selected weld bolts are attached.
Create Group
The shapes and bolts form a group.
In Part List
The component parts attached with this function are added to the parts list.
In Bolt List
The component parts attached with this function are added to the bolt list.
Group Dimensions Dia
Bolt diameter
Length
Bolt length
Page D.4 - 3
Dispatch Bolts / Blocks
Bottom Dia
Diameter of the bolt‟s base
Bottom
Length of the bolt‟s base
Top Dia.
Diameter of the bolt‟s head
Top Length
Length of the head
Bolt Dia.
Diameter of bolt nipple
Bolt Length
Length of bolt nipple
Group Others Name
The bolt name in the parts list
List
The list of available entries in the selected bolt database
This button distributes the bolts on the selected shapes according to the preset rules.
This button permits individual placing of bolts on the selected shapes. Here, each insertion point is indicated individually.
Here you see two examples for the distribution of welded bolts on shapes:
Page D.4 - 4
Dispatch Bolts / Blocks
D.4.2 Insertion of Blocks Alternatively, you can also make distribute existing self-created AutoCADblocks. Then you have to select the second page. The specifications concerning the parametric dimensions are omitted of course. The block is inserted exactly as you created it. Please note that the current UCS has to agree with the UCS of the block to grant a correct alignment of the block. The proceeding is identical as well. The only difference consists in the fact that no generated parts are inserted but the individually specified block. Therefore this is a very flexible command.
The options concerning the distribution are identical with the distribution of thread bolts. So you can refer to this chapter for more detailed information. Hole Dia Sign
You can specify a code for the drill holes to be created. This code serves for selection of special NC-programs being able to recognize this code.
Block path
This is the path to the block to be inserted.
List
The list of saved blocks from the database
Page D.4 - 5
Dispatch Bolts / Blocks
Further Options and Data Base As it is the case with many other ProSteel functions, here too it is possible to make some standard default settings directly under „Assignments‟ for the component parts to be inserted.
Data Base
Select the database to be used.
Seize Parts
The component parts are seized for the parts list.
Data Base Definition You can define a database with pre-defined thread bolts resp. paths to the blocks before you can optimally utilize the distribution command. Any thread bolts or blocks indicated there are then displayed in the selection list. This DBASE-file (e.g. bolts.dbf) has to be indicated in the configurations.
Page D.4 - 6
Dispatch Bolts / Blocks Meaning of the Data Base Fields TYPE
indicates the entry type (1 = thread bolt, 2 = block)
NAME
name of the thread bolt or block
BLOCKPATH
complete path to the block (only for type 2)
HOLEDESCRI
drill hole code (only for type 2)
HOLEDM
diameter of marking hole
HOLELENGTH
depth of marking hole
LENGTH
length of thread hole (only for type 1)
DM
diameter of thread hole (only for type1)
FOOTDM
diameter of thread hole foot (only for type1)
FOOTHEIGHT
height of thread hole foot (only for type1)
HEADDM
diameter of thread hole head (only for type1)
HEADHEIGHT
height of thread hole head (only for type1)
NIPPELDM
diameter of thread hole nipple (only for type1)
NIPPELLENG
length of thread hole nipple (only for type1)
Page D.4 - 7
Dispatch Bolts / Blocks
Page D.4 - 8
Auxiliary Tools
D.5
Auxiliary Tools
D.5.1
Collision Check
An important task of modern CAD systems is to avoid errors during construction. First and foremost this is to avoid collisions. This functions serves for the detection and display of collisions within any kind of component parts. There are various reasons for collisions to occur. In addition this function helps you to check whether bolts can be mounted or not. The check is made on the base of the parts volume. If a collision is detected, the collision volume is displayed on screen and the component parts in question are highlighted. Then, you can zoom on all collisions one after the other and check the positions concerned. At collision check, xref-drawings are evaluated as well.
Min. Volume
Minimal collision volume, from which on the collision is seized as such. The display is made in drawing units (such as e. g. mmз). This avoids that your attention is distracted from important things by collisions, which are due to minimal tolerances.
Display Scaling
Factor by which the zoom window is increased when you zoom on the found parts to get a survey on the whole situation.
Actual/Max.
Display of the current collision solid and the total amount of solids found.
Page D.5 - 1
Auxiliary Tools
Use this button to start collision check. You are prompted to select all parts to be checked. All colliding components now are highlighted with a colour defined in the settings, and the collision solids are displayed. You can of course select a complete model. Please note that the required time increases with the square of the number of selected component parts. The reason is that each part has to be checked with each other part. Therefore, it is often more reasonable to check only a certain junction point at a time. All selected bolts are checked with regard to any possible collisions.
Use this button to remove the highlighting of the parts and to delete all found collision solids as long as they are situated on the collision layer. Use this button to select the next found collision solid for examination. Use this button to select the previous found collision solid for examination.
Page D.5 - 2
Auxiliary Tools
Options During collision check, you can specify which component parts have to be checked against each other. A filter is available for the selection of the parts to be checked.
Shapes
can be checked for collisions with shapes, plates, bolts and bodies. The collision volume is only displayed for the selected pairings.
Plates
can be checked for collisions with plates, bolts and bodies. The collision volume is only displayed for the selected pairings.
Bolts
can be checked for collisions with bolts and bodies. The mounting space of the bolts which can be specified in bolt style can be used as well. The collision volume is only displayed for the selected pairings.
Bodies
Bodies can be checked against other bodies. The collision volume is only displayed for the selected pairings.
Highest Resolution The component parts are temporarily switched over to highest possible resolution for collision check. Mounting Area
At collision check with bolts, the mounting area of bolts is taken into consideration as well.
Page D.5 - 3
Auxiliary Tools
D.5.2
Center of Gravity
Use this function to calculate the center of gravity of any parts. Select the parts in question and the calculation is started. A ball in the model and numerically in the dialog line visually displays the result. There, you obtain information about the defined volume, the exact coordinates of the center of gravity (in world coordinates) as well as the total weight of the parts. Please note that, in contrast to previous versions than Release 18, different specific weights are taken into consideration.
Page D.5 - 4
Auxiliary Tools
D.5.3 Tube Unfold Using this command you can unfold any kind of cutout shapes, tubes and bent plates and insert its development immediately into the active UCS plane. When you select this command, the following dialog box opens.
Resolution Max. Indicate the resolution of the unfolding. The higher the indicated value, the more detailed is the scan of the component searching for any possible outlets or notches. The greatest acceptable value is 360. Use ACIS
Switches the component part from unfolding to ACIS. The result may be an increase of accuracy.
Inner Contour
The inner contour of tube shapes is unfolded as well.
Page D.5 - 5
Auxiliary Tools Group Colours Outer Contour Outside Edges
colour of the outer contour of the developments.
Tessellation L.
colour of the tessellation lines of the outer contour.
Bend Line
colour of possibly existing bent edges of the outer contour.
Create Tessel.
If this field is checked, tessellation lines are displayed.
Group Colours Inner Contour Outer Edge
colour of the inner contour of the developments.
Tessellation L.
colour of the tessellation lines of the inner contour.
Creating Development After you have exited the dialog, you have to click the shape that is to be unwound or developed. The desired operation is then supplied “sticking to the crosshairs”. Position it freely anywhere in the model and process it further if desired. If you have selected „Inner Contour‟, both developments are sticking to the crosshairs in the form of two properly positioned blocks. Position them anywhere in the model and then process them individually.
Page D.5 - 6
Auxiliary Tools
D.5.4
Move Objects
Use this function to simulate moving of any parts along a line, poly-line or spline. This can be applied for visualizations or to check whether parts can be assembled. The objects are moved along a guideline in a set speed. In addition, you can choose whether you only want to move the parts or whether they have to be rotated as well.
Resolution
Enter here into how many equal parts the guide line has to be divided. The higher the value, the more regular and the more fluent the simulated movement will be.
Delay
Wait in milliseconds after each single movement. This value controls the speed of the simulated movement.
Move and..
The objects are not only moved along the guide line, but also rotated around this line. This means, if you have a “sharp bend” in the line, the parts will be rotated along this bend.
After clicking the OK button, seize the guide line first. This may be a line, polyline, spline or an arc. Then seize the parts and the simulation starts.
Page D.5 - 7
Auxiliary Tools
D.5.5
Create ACIS-DWG
If you process 3D-models using other 3D-programs, it often will be necessary to convert the existing ProSteel-component parts into mere ACIS-bodies. After having loaded the function, you have to select the component parts which you want to convert. Important: Please note that the converted component parts don‟t keep their ProSteel-intelligence such as shape reference, logical links etc. The body, however, is inserted additionally and the original component part is only hidden. You can make it visible again using the command PS_REGEN.
Batch Processing To avoid having to process each drawing individually, batch processing is available if you have many drawings. All drawings of a directory are processed automatically and the converted drawings are saved in another directory.
Source Directory Enter the directory containing the drawings you want to have converted automatically. Target Directory Enter the directory where you want to save all converted drawings. The target directory mustn‟t be identical with the source directory nor must it be beneath the source directory. Purge Drawing
Each drawing is purged before it is saved.
Recursive
Drawings in sub directories of the selected directory are processed as well.
Groups
Each component part group is converted as common ACISbody. Otherwise, each component part of the group is converted individually.
Page D.5 - 8
Auxiliary Tools
Resolution
The resolution of the component parts (without radii etc.) is kept individually per part. Otherwise, the ACIS-body is created with the maximum possible resolution.
Delete
The original component parts are not only hidden after conversion, but completely deleted.
Keep Layer
The converted ACIS-bodies are kept on the layer of the original component part. Otherwise, all bodies are created on the current layer. If this field is not activated, you can easily copy the result of conversion from the drawing.
Page D.5 - 9
Auxiliary Tools
D.5.6
Create AutoCAD Drawing
If you have to pass on 3D or 2D-drawings, it is sometimes necessary that they don‟t contain any ProSteel objects any more. This command converts each object of the drawing into its original AutoCAD graphical elements so that the recipient doesn‟t get any Proxy-message any during loading. Important: Please note that the information of the drawing is visually kept, but that the complete ProSteel-intelligence of the component parts such as shape reference, logical links etc. is irretrievably lost.
Batch Processing To avoid having to process each drawing individually, batch processing is available if you have many drawings. All drawings of a directory are processed automatically and the converted drawings are saved in another directory.
Source Directory Enter the directory containing the drawings you want to have converted automatically. Target Directory Enter the directory where you want to save all converted drawings. The target directory mustn‟t be identical with the source directory nor must it be beneath the source directory. Purge Drawing
Each drawing is purged before it is saved.
Recursive
Drawings in sub directories of the selected directory are processed as well.
Page D.5 - 10
Auxiliary Tools
D.5.7
Convert ADT shapes
This function is only available in a specific version of ProSteel for Autodesk Architectural Desktop (ADT) from Autodesk. This AutoCAD application is specifically designed for architects and contains a variety of steel shapes. With a call to this function you can convert the ADT shapes into ProSteel shapes for further use of the ProSteel manipulation functionality for steel construction. After a call to the function you should choose all the ADT shapes that should be converted. If ProSteel finds a corresponding shape in its database then the ADT shape is deleted and is replaced with the suitable ProSteel shape.
Page D.5 - 11
Auxiliary Tools
Page D.5 - 12
Add Effective Static Anaysis Lines
D.6
Add Effective Static Analysis Lines
Analysis display allows you to control and to work on the effective static analysis lines of the shapes to get an optimum output for translation to static analysis programs. From the individual interfaces, you can force the output of analysis display. The effective lines defined by you will be output instead of the center lines of the shapes. If no modifications were made here, the effective lines correspond to center lines. This function offers you, the possibility to modify the effective lines independently of the insertion of a shape to balance e.g. eccentricities, if these have no importance for calculation or to close open nodes.
Effective Lines After loading the function, you first have to select the objects that are to be switched to analysis display. Having made this selection, you only see an individual line of each shape, representing the effective static analysis line. The different colours within the line help you to recognize whether the end is connected with another shape (representing a node) or whether it is open (e.g. a cantilever). If the end is open and not a cantilever, then you are dealing with eccentric shapes in most cases and you could create a closed system by means of this function. It is possible to modify the effective lines manually by using the offered options of this function or by modifying them via AutoCAD grips.
Page D.6 - 1
Add Effective Static Anaysis Lines
Check colours...: If this field is checked, the colours of the represented shape ends will be verified automatically, every time the function is loaded. See button ->'Update colours' Check connect...: If this field is checked, the different parts will be verified automatically whether they are connected with each other or not, every time the function is loaded. Display is adapted accordingly. Hide ...
If these fields are checked, the selected objects will be hidden to provide a clearer view. You can hide work frames, structural elements (auxiliary lines of structural elements), polyplates, bolts and connecting parts such as web angles, etc.
Shorten offsets: If this field is checked, the “cantilevered” ends at a node will be shortened, so that there will be no offsets. You can specify the maximum possible offset in the corresponding input field Max. Offset. All values larger than the actual value e.g. a cantilever and will not be taken into account. When this button is clicked, the program tries to connect the effective static analysis lines automatically to create a closed system. If the effective lines are situated in a common plane, they are extended to each other and a node is symbolically represented as a ball. At the same time, the ends adopt the same colour as the center part of the line to display a closed connection. Please note, that the penetrating lines are not divided at the nodes. You can force this division later during export. When this button is clicked, the program verifies whether a connection to neighbouring parts or an open end exists. The represented colour will be modified accordingly. “Red” signifies that there is an open end and “green” means that this end is connected with a neighbouring part. The difference between this function and the function 'Automatic' is, that here the program only checks and the display is updated where as the function 'Automatic' tries to create a connection and when doing this can also modify the effective line.
Page D.6 - 2
Add Effective Static Anaysis Lines
If this button is clicked, the components in question are connected with each other by means of a manual link. For this purpose you have to select the components afterwards. The main part of the manual connection keeps its position; the connected parts are related to this main part so that their effective lines can e.g. be positioned diagonally towards it. A node will be created automatically. A manual link does not have any further meaning. It only serves for creation of intended connections. On one hand, these connections are used in this function for the definition of nodes. On the other hand, they allow dimensioning of system lines at detailing.
Query and Modify Static Effective Lines The data of effective static analysis lines can also be seen or modified in shape properties. This tab is only available after having been activated in the global settings. If this page is loaded, the display immediately switches over to analysis-display.
Start X,Y,Z
the coordinates of the start point of the effective static analysis line in absolute coordinate values.
Page D.6 - 3
Add Effective Static Anaysis Lines
End X,Y,Z:
the coordinates of the end point of the effective static analysis line in absolute coordinate values.
Manual input:
If this field is checked, the values of the corresponding end have been modified manually (and mostly, they differ from the center line).
Connected with: If this field is checked, the corresponding end is connected with another shape by means of a node No Discrimination If this field is checked, you can avoid a division of the shape in individual lines between the nodes of connecting shapes at export of static data. In export functions, you can, avoid this limitation so that you don't have to modify each single shape if this division is desired. See function ->'Export Allows picking the start point of AEC.
Allows picking the end point of AEC.
Page D.6 - 4
Data Exchange
D.7 D.7.1
Data Exchange General Information about Data Exchange
It is possible to send and receive data to and from other programs via the import and export interfaces of ProSteel. In most cases, these are 3D-constructions of other CAD-programs or the static analysis systems of programs for static analysis calculations. The exchange takes place via a special file format defined by independent standard committees like e.g. Deutscher Stahlbauverband DSTV (German Association of Steel Construction) or even by the program manufacturers themselves. The data to be exchanged are mostly saved as ASCII-text file; therefore they are independent of the used operating systems. In case of possible transfer problems they can be adapted with any text editor you like. Additionally to the "acknowledged" formats, ProSteel also has its own exchange format based on a clear text file. This format exactly describes the positioning and detailing of component parts, group structure and parts list or part information.
Data Exchange in Practice In practice, data are often exchanged between CAD and static programs. This exchange is limited to the exchange of systems. A static system is created for the rough analysis of costs (determination of the expected cross-sections). Then the system is transferred to the CAD-program to create overviews or visualizations for the offer. At the following construction, a more detailed model of the system is created and could be retransmitted to the static analysis program to carry out more detailed calculations. After construction, however, it occurs quite often that special NC-production data for DCC machines are transmitted which contain already all shape detailing processes. In addition, the parts list data are transferred to the corresponding PPS systems for storing and for the placing of orders.
Page D.7 - 5
Data Exchange
Data Exchange Problems ProSteel has a great number of interfaces to allow for a universal use. There should always be a common denominator to be found for the data exchange. The volume of exchangeable information always depends on the complexity of interface definition and the corresponding implementation degree of transmitter and receiver. It might be that ProSteel could interpret the complete 3D-model including all connections as file of a certain interface, the writing program, however, can only write the position of standard shapes. In this case, important data will of course be lost during transfer and would have to be re-modelled – if necessary. Another problem is that the designations for material and cross-sections of the concerned programs partly differ from each other. The data are imported correctly, but the reading program doesn‟t recognize e.g. the shapes because in most cases the name is compared without error tolerance. To minimize this problem, ProSteel offers so-called exchange lists where a translation of the designations can be controlled exactly.
Page D.7 - 6
Data Exchange
D.7.2 Exchange Lists Exchange lists can solve many problems occurring in the data exchange between ProSteel and other programs. Different designations are often used for the same shape or material – especially when the files in question are foreign formats, which are not subject to a common standard. While it isn‟t a problem for the human mind to recognize that the designation HEA100 and HE-100A probably describe the same shape, this is a much bigger problem for the computer.
Principle of the Exchange List You can create exchange lists to allow for an adaptation to most different target systems; the required list can be selected for import/export. These links can be permanently saved via templates. Now, if a material or shape designation is read during import, the program is looking for the corresponding ProSteel-designation in the current exchange list. If the search was successful, this designation will be used in the further process. Of course, it is reasonable that several alternative designations are assigned to one ProSteel designation and that the list is able to learn. Each unknown designation can be temporarily or permanently saved in an exchange list which in the course of time will become more and more extensive. Vice versa during export process, the program is looking for the corresponding exchange designation of a ProSteel designation. This designation will be exported. Due to the capability to learn and to avoid errors, you should use one list for import and export. Therefore, if there are several alternative designations, you should explicitly specify one of them as export name. The use of these lists also allows for an error tolerant handling of exchange files: Due to the three possibilities, the shape HE100-A will be recognized correctly and translated into the ProSteel-designation HE100A. During output, the correct preset shape designation (grey) will be used.
Page D.7 - 7
Data Exchange
Definition of an Exchange List One or more exchange lists can be created by means of a dialog or via a DBASE-file, which has to be converted afterwards. They are stored as binary file having the ending *.exm in the data directory of ProSteel. An exchange file processes shape and material names simultaneously. Therefore only one file is required and this is the reason why in the following only the term “Exchange Designation” will be used.
Group Exchange List Internal Name
Here, you will find a list of all designations used by ProSteel. You can assign as many alternative exchange designations to each of these internal names as you like. The current selection is displayed in the grey input field.
> List Field
Here, you select the shape type. When the input field Material has been checked, this previous type selection is not available.
> Selection List
Here, you select the shape size or the material designation to which you want to assign the alternative names.
Page D.7 - 8
Data Exchange
Replace as
Enter a new designation and insert it into the list. The program doesn‟t differentiate capitalization or the use of small initial letters. Since exchange designations can only be inserted, you have to insert the new entry first and then delete the old one, if you only want to modify an entry.
> Selection List
Here, you will find the exchange designations of the ProSteel designation selected on the left. The first name in the list is the designation used during export of a ProSteel model.
INSERT
By clicking this button, the new exchange designation specified in the input field Replace is assigned to the selected ProSteel designation.
DELETE
By clicking this button, the selected exchange designation is removed from the selected ProSteel designation.
DELIVERY
By clicking this button, the selected exchange designation is selected for export and moved to the first position in the list.
Shapes
Here, you can make the above-mentioned assignments for shape designations.
Material
Here, you can make the above-mentioned assignments for material designations.
All
all-internal names are displayed – no matter whether exchange designations have been assigned or not.
Ready
Only those internal names are displayed to which exchange designations have already been assigned.
Open
Only those internal names are displayed to which exchange designations have not been assigned.
Group Others File
the file path of the current exchange list.
Content
A short description of the content of the new exchange list or of the list, which has been loaded at the very moment.
Add Names
The exchange designations of the shape data base are entered when an exchange list is created or completed.
Page D.7 - 9
Data Exchange
Dialog-Commands LOAD By clicking this button, you can load an exchange list. It is also possible to import an exchange list in dBASE-format by selecting the file type in the file selection dialog, which opens then. dBASE-import is not available when you select the dialog via the interface dialogs. STORE By clicking this button, you can store the current exchange list. It is possible to export an exchange list in dBASE-format by selecting the file type in the file selection dialog, which opens then. dBASE-export is not available when you select the dialog via the interface dialog. NEW By clicking this button, a new exchange list is created based on the shape and material database of ProSteel. Thus, you obtain all available internal names and you can add the desired exchange designations to them. If the field Add Exchange Designation at New/Update has been checked, the exchange designations of the shape database are entered, too. UPDATE By clicking this button, new entries based on the shape or material database of ProSteel are added to the current exchange list.
Page D.7 - 10
Data Exchange
Metric and Imperial When reading the data, the program determines the appropriate shape designation (metric or imperial) for the drawing. This means that you can import imperial shape names into a metric drawing if those have been specified as alternative designations. In this case, the internal metric name will be transferred to ProSteel. Since an explicit export designation has to be defined for the data export, you specify by means of the selected exchange list whether a metric or imperial designation has to be used. When both variants are required, you need two different exchange lists, too. Since import should be of universal use, both names are available in the list as possible exchange designation. You can copy one list after creation and use the copy to modify the order in the list for the shapes in question.
Exchange Designations of the Shape Data Base In the *.dbf-files of the shape data base, you will also find designations for data exchange in the fields TRANSMETRIC and TRANSZOLL. They come from earlier program versions and are named according to the DSTV-defaults for DIN-shapes. The new interfaces don‟t use the data fields any more, in contrast to the old interfaces. Since here you have already “a set” of available exchange designations, these can be loaded as preset when a new list is created. Thus, you will immediately obtain a list, which is able to work as basis for your individual adaptations.
Page D.7 - 11
Data Exchange
Exchange List in dBASE-Format As an option to the processing possibilities of this function, the exchange lists can also be created and processed with the help of any other programs being able to read and write dBASE files. This method is recommended in case of more important modifications because programs like e.g. Microsoft Excel have been optimized with regard to working with lists. First, you can create a new list in this function to obtain the internal names. Then, you save these names as dBASE file which is processed with the help of the foreign program and re-import the file into ProSteel afterwards to save the list in the internal *.exm-format. Please note that this list has to be available as *.exm-file for use with ProSteel. Data Fields of dBASE-File The dBASE-file has to contain the following fields, which in general are chains of signs. The fields 0-5 are absolutely necessary, the fields 6,7 etc. can be used as an option. Since the dBASE-file only has a sequential structure of data records, whereas the exchange lists are organized in a tree structure, this tree structure has to be simulated by means of group-lines. Group lines only contain the fields 0-2, shape or material lines contain only the fields 0 and 3,4,... Field Field Name
Content
0 1 2 3 4 5 6 7... n
line type, (F) group line (S) shape entry (M) material entry shape type when shape group or "Material" when material group ProSteel shape file (when material group: no entry necessary) Internal ProSteel designation metric Internal ProSteel designation imperial (for material like field 3) exchange designation (1st list entry, is also export name) if need be, further exchange designation (2nd list entry) if need be, further exchange designations (next list entries)
TYPE FAMILY FILE METRIC IMPERIAL EXCHANGE IMPORT1 IMPORT2 ... n
(shape file)
The dBASE-file with the shape data of the data directory of ProSteel. Here specified without path with name and extension.
(shape type)
Type designation (e.g. DIN_HEA); the different sizes are the shape entries up to the next group line.
Page D.7 - 12
Data Exchange
D.7.3 Interface Format Selection Import and export of the new ProSteel interfaces like PXF or Product Interface Steel Construction is affected via a common dialog box for all interfaces, which will be described in this chapter. In addition, the commands of formats like DSTV-NC or DSTV-PPS, which have already existed for quite some time, are available. These are described in a separate chapter and cannot (yet) be loaded via the common dialog. When the import or export command is loaded, a file selection dialog opens first, where you can select the required interface format under File Type. If an interface dialog is planned for the interface, this dialog appears in form of individual pages in a dialog box that is identical for all formats. In addition, a page for ‟General Settings‟ and/or „Conversion‟ can be displayed where you can enter data, which are independent of the corresponding interface. The following figure shows the dialog box. In this example, 2 property pages for ”Product Interface Steel Construction“ of the DSTV (‟Control Field‟ and „Options‟) have been inserted; in addition there is the common page ‟General Settings‟ and/or „Conversion‟.
Page D.7 - 13
Data Exchange
Control Field
Individual page of the selected interface.
Options
Individual page of the selected interface.
General Settings Common page for all interfaces. Conversion
Common page for all interfaces.
In the following chapters, you will find a description of the different interfaces and of their property pages. In most cases, the corresponding manufacturers or standard committees can obtain a description of the interface formats.
Dialog Commands CONTINUE (OK) By clicking this button, import or export will be continued, if the selected interface command is waiting for further specifications or if the process has been stopped for your information. LIST By clicking this button, you can select an existing exchange list for import or export.
PROCESS By clicking this button, you can process an existing exchange list for import or export or select another list.
FILE If you click this button, the read or created interface file will be displayed if it is an ASCII-text file.
ERROR REPORT By clicking this button, you can view an error report, if it is created by the selected interface command. In this error report, you are e.g. informed whether errors have occurred in a read file or whether certain data cannot be evaluated by ProSteel.
Page D.7 - 14
Data Exchange
D.7.4 Data Import Command This command allows for importing data of other programs in ProSteel via an exchange file. In most cases, these data are 3D-models of other CAD-programs or the static systems of programs for static calculations. At printing of this manual, the following interfaces have already been integrated in the new arranged import dialog: - DSTV Product Interface Steel Construction (*.stp) - PXF Data Exchange Format (*.pxf) - STAAD III (*.std) - STAAD.pro (*.std) - CIMSteel/2 (*.stp) - SDNF (*.sdf) - ProSteel Object-Exchange Data (*.psb) It is, however, possible that you will find already further formats in your ProSteel version. The performance range of the interfaces (implementation degree) can have been extended, too. Please refer to the up-dated hints on your installationCD.
Import Data When this function is loaded, a file selection dialog opens where you can select the required interface under File Type. Then, you select the file to be imported. Depending on the interface, an interface dialog opens where you can make further specifications concerning the data to be imported. After file selection resp. after confirmation of import process in the dialog, the data are evaluated and the ProSteel model is created. Depending on the complexity of the interface and on the volume of the data, this process may take some time. You are, however, informed about the current state in the AutoCADcommand line or in the interface dialog. After the creation of the model has been finished, a note box will be displayed.
Working Areas A working area can be created automatically to allow you to work with the basic views of the imported model immediately. A rectangular working area will be created approximately describing the outer dimensions of the model (only the end points of the shape axes are considered at the calculation). This is an ideal starting point for the control of the imported model resp. for the creation of further views.
Page D.7 - 15
Data Exchange
Unknown Designations As the data in the exchange formats mostly are the used shapes and plates, it is recommended to provide all existing shape databases correctly. You should do this above all if you import constructions containing foreign shape series. In most cases, the interface formats only transfer one shape name as reference; the actual information on the geometry of the cross-section comes from the importing program. ProSteel supports so-called exchange lists to cope with the different designations. The imported name is translated into a valid ProSteel shape and the selection of substitute cross-sections is made possible. If the name does not exist, the shape is considered to be unknown. A dialog appears where you can assign a ProSteel shape to the unknown shape.
Unknown
The imported shape name, which is not found.
ProSteel
here, you enter the access code or you select the shape from a list by clicking SELECTION button. The shape type (e.g. HEA) is displayed first at selection. After having selected the shape type, you can select the required shape from the existing shape sizes by double-clicking the entry.
Permanent
The specified assignment is permanently stored in a file. Otherwise, it is only valid for the current load of import command. Thus, it will also be available for later selections of this or other import commands.
Page D.7 - 16
Data Exchange
The assignment of unknown designations is also available for material names. The process is the same as described under shape names.
General Settings If the interface dialog is available in the selected import format, it can also contain a page for “General Settings” apart from the specific pages. This page is identical for all interfaces and permits settings for the import process. Depending on the implementation degree of the interface, it is possible that certain fields are not activated.
Error Report
An error report is created during import and model generation. You can see here which data are defective or which cannot be evaluated by ProSteel. If such an error report was created, you can display it by clicking the ERROR REPORT button in the dialog box.
Working Area
A working area of 6 basic views is created with the help of the outer dimensions of the imported model.
> Name
Here, you can indicate the name of the working area. If it still exists, the new views obtain the index "2".
Page D.7 - 17
Data Exchange
Connect
Continuous shape parts (bars) are connected to a common shape. Only those shapes are connected which have the same size and position, which are situated on a common axis and which don‟t exceed a preset distance of the end points.
> Max. Distance Here, you enter the maximum distance, which is allowed for the end points to be connected to be recognized as continuous shape. > Tolerance Value Here, you enter a tolerance for possible deviations of the gusset coordinates. This is reasonable when you import data of static analysis programs as these are generating a system of bars from gusset to gusset (e.g. plate connection) although in reality it is a continuous shape.
Connecting Shapes The static program transfers this system as 4 bars of 1-2, 2-3, 4-2 and 5-2. Four shapes are created first which are connected in the way that there will be one remaining shape of 1-3 and one of 4-5. Supposed the fact that bars of 1-2, 2-3, 4-4a and 5-5a were transferred, the bars 4-4a and 5-5a would only be connected to a shape if the distance of 4a to 5a was smaller than indicated in „Max. Distance‟ input field.
Page D.7 - 18
Data Exchange
Conversion If the interface dialog is available in the selected import format, it can also contain a page for “Conversion” apart from the specific pages. This page is identical for all interfaces and permits settings for the import process. Depending on the implementation degree of the interface, it is possible that certain fields are not activated.
Query
At import process, you are prompted for each unknown shape or material in a dialog so that you can select a replacing shape. If this field has not been checked, the unknown shape cannot be created. However, it might be that certain parts are not required for very big models. Therefore, a replacement is not necessary.
Import-Table
Here, you see the file name of the currently used exchange list.
Page D.7 - 19
Data Exchange
D.7.5 Data Export Command This command allows for exporting data of ProSteel into other programs via an exchange file. In most cases, this data is 3D-models as static analysis systems or the position and detailing of single shapes. At printing of this manual, the following interfaces have already been integrated in the newly arranged export dialog: - DSTV Product Interface Steel Construction (*.stp) - PXF Data Exchange Format (*.pxf) - STAAD III (*.std) - STAAD.pro (*.std) - CIMSteel/2 (*.stp) - SDNF (*.sdf) - KISS (*.kss) - ProSteel Standard Interface (*.ps3) - ProSteel Object-Exchange Data (*.psb) It is, possible that you will already find further formats in your ProSteel version. The performance range of the interfaces (implementation degree) can be extended, too. Please refer to the up-dated hints on your installation-CD.
Export Data When this function is loaded, you first have to select the parts to be exported in the model and a file selection dialog opens and you can select the required interface under the option File Type. Then, you select the file to be exported. Depending on the interface, an interface dialog opens where you can make further specifications concerning the format. After file selection resp. after confirmation of export process in the dialog, the model data are evaluated and the data record is created. Depending on the complexity of the interface and on the volume of the data, this process may take some time. You are, however, informed about the current state in the AutoCADcommand line or in the interface dialog. After the creation of the file has been finished, a note box will be displayed.
Page D.7 - 20
Data Exchange
General Settings If the interface dialog is available in the selected export format, it can also contain a page for “General Settings” apart from the specific pages. This page is identical for all interfaces and permits settings for the export process. Depending on the implementation degree of the interface, it is possible that certain fields are not activated.
Error Report
An error report is created during exports and file generation. You can see here which model data cannot be evaluated by ProSteel for the interface. If such an error report was created, you can display it by clicking the ERROR REPORT button in the dialog box.
Nodes
Continuous shapes at connections or theoretical points of intersection with other shapes are divided.
> Protection
A possibly existing protection against division at possible nodes is ignored at export of analysis display. Since the division is mostly desired, you should deactivate this option only in exceptional cases.
> Max. Distance Here, you enter the maximum distance, which is allowed for the end point of a shape towards the continuous shape to be recognized as shape to be divided.
Page D.7 - 21
Data Exchange
> Min. Length
Here, you enter the minimum length of the bar, which has to be created by the division. If this length is smaller, a division will not be made and eccentricities will be determined instead.
This is reasonable when you export data to static analysis programs as these are expecting a system of bars from gusset to gusset (e.g. plate connections) although in reality it is a continuous shape. As ProSteel of course cannot be as specialized as a static program, you can switch off this option by this way, if the static program offers better functions for this purpose. Analysis
Instead of the CAD-position of the actual shape an alternative static effective line is exported. This line can be individually adapted for each shape to your requirements for the transfer of static systems by means of the „Analysis Display‟ command. You can avoid e.g. open nodes or eccentricities (due to different insertion levels).
Dividing Shapes The ProSteel model has the shapes of 1-2, 3-4 and 5-6. The shape of 1-2 is divided first into two parts of 1-6a and 6a-2. Another division of the new created shape 1-6a and two other parts 1-4a and 4a-6a is made, if the resulting two bars have at least the same length as indicated in „Min. Bar Length‟ input field.
Page D.7 - 22
Data Exchange
Conversion If the interface dialog is available in the selected export format, it can also contain a page for “Conversion” apart from the specific pages. This page is identical for all interfaces and permits settings for the export process. Depending on the implementation degree of the interface, it is possible that certain fields are not activated.
Always Flat Steel It is always a flat steel shape, which is exported even if the type has not been defined as flat steel in the database. If Unknown
A flat steel shape is exported as poly-plate (metal sheet) if the type has not been defined as flat steel in the data base.
Always Poly-Plate Each flat steel shape is exported as poly-plate (metal sheet). Query
At import process, you are prompted for each unknown shape or material in a dialog so that you can select a replacing shape. If this field has not been checked, the unknown shape cannot be created. However, it might be that certain parts are not required for very big models. Therefore, a replacement is not necessary.
Export-Table
Here, you see the file name of the currently used exchange list.
Page D.7 - 23
Data Exchange
D.7.6
Direct Data Exchange with RSTAB
There is a direct data interface to the analysis program for static analysis calculations RSTAB of Messrs. Ing.-Software Dlubal GmbH which works without explicit exchange file. The prerequisite is that ProSteel and RSTAB have been installed and started on the same machine. Apart from the transfer of the system and of the cross-sections, this exchange supports a better adaptation of the system to the requirements of static calculation with RSTAB as well as an intelligent modification mechanism. Only the corrected cross-sections or insertion points of existing bars/shapes are transferred so that already assigned data in the other software are kept. After having selected the command, you obtain a list of the interfaces supporting the direct exchange. Select the entry 'Dlubal RSTAB' and the dialog for data export with an RSTAB-extension will be displayed. Since the data exchange is based on an extension of the ‟Product Interface Steel Construction‟, please refer to the corresponding chapters there for further information. After the transfer was started, RSTAB will automatically report data import. For more detailed information, please refer to your RSTAB-documentation. If you want to work with the modification mechanism, don‟t forget to save your model after data export because information is stored in the drawing database.
Import in ProSteel When you receive RSTAB data, ProSteel will automatically report the data import. If you want to work with the modification mechanism, the corresponding ProSteel model has of course to be open before. On an additional dialog page for RSTAB data import you can select which modifications have to be transferred to your ProSteel model.
Exchange without RSTAB-Installation When RSTAB has not been installed on your machine, you nevertheless can profit from the extensions. Please select the entry ‟Dlubal RSTAB as export format‟ as export interface (or import interface) when normally loading the function (PS_EXPORT or PS_IMPORT). You obtain a file of ‟Product Interface Steel Construction‟ where the RSTABextensions are added. However, this file can also be read with any other program supporting this format.
Page D.7 - 24
Data Exchange
D.7.7
New Interfaces
In this chapter, you will find a description of the interface dialogs and implementation degrees of the different interfaces. Please note, however, that this is the state at printing of the manual and that your current ProSteel version can have been extended in the meantime. Please refer to the up-dated hints o n your installation-CD. As the implementation degree of import and export can differ from each other, these areas are treated separately at each interface description. These are data which can be interpreted or written by ProSteel at the very moment – the import exchange file might however contain further data which could be read at a later moment. Due to their data structure, most of the interfaces support this selective reading of data. Load data of static programs can e.g. be assigned to an element, the position in the space as well. If the load data cannot be evaluated, this doesn‟t have any influence on the interpretation of position.
Page D.7 - 25
Data Exchange
DSTV Product Interface Steel Construction The product interface steel construction of the German Association of Steel Construction (DSTV) is a relatively new data exchange format of all the programs participating in a production process. In a standardized format, it contains the data exchange between e.g. CAD and static programs, PPSsystems or DCC-machines and ideally is meant to replace the previous formats after good long testing. File Format: ASCII-text file with the extension *.stp The interface format was revised several times in the past. ProSteel is only supporting the latest valid version. Data Import ProSteel is able to evaluate the CAD-system data for standard shapes and plates, i.e. the position of the parts in the space without detailing processes and connection elements. Plates, the contours which are transferred as polygons if displayed correctly. If the shape was, however, created by cuts or similar things, this information would be lost and only the mostly rectangular basic solid would be displayed. In addition, the static system for standard shapes can be read, i.e. the position of the parts in the space including eccentricities. After file selection, it is verified whether this is a valid file of this interface. Then the header area is read and displayed in the appearing interface dialog. The import can still be interrupted here, if you recognize that the wrong file was selected. Click on the OK button of the dialog box to continue the import. The data record is analysed and the function recognizes itself whether it is a matter of CAD or static data or whether both data types are together in a common file. Before the actual model generation will take place, you once again have the possibility to make individual import settings. You start model generation by once again clicking the OK button. You could e.g. select which data type has to be preferred at a common file or whether a working area has to be created, etc.
Page D.7 - 26
Data Exchange
This page shows the entries of the exchange file header and doesn‟t accept any further settings. You can only interrupt the import process if it isn‟t the required file.
Group Others Ignore
Unknown interface commands of the current implementation degree are ignored and cannot be re-exported. This means that only those entries remain in the file, which can be processed by ProSteel.
Page D.7 - 27
Data Exchange
This option is provided for a later implementation degree of the interface. In this degree, it will be possible to manage modifications and to transfer unknown data 1:1. If need be, the references will be up-dated. Position Numbers The imported position numbers are adopted into the parts properties. Control Entries
The reference numbers and codes of the exchange file parts are adopted into the shape properties. This facilitates finding mistakes or incomplete data resp. controlling the origin of modifications.
Group Format-Selection CAD
At mixed data, the CAD elements (component parts) are preferred and any possible static analysis data are only evaluated as additional information.
Static Analysis
At mixed data, the static elements (bars) are preferred and any possible CAD data are only evaluated as additional information. This is an option for a later implementation degree.
Data Export ProSteel is able to export the CAD-system data for standard shapes and plates, however without detailing processes and connection elements. A plate made out of a number of polygons is exported correctly. If different detailing processes created it, only the basic polygon will be output. In addition, the static system for standard shapes can be written. Depending on the settings on the “General Settings” page, it is tried to determine intermediate gussets for connections and eccentricities. After file selection, you can enter the header area specifications in the appearing interface dialog. Click on the OK button of the dialog box to continue the export. The model is analysed and the export data record is prepared according to your settings on the „Option‟ page. The data then are written in the selected file by once again clicking the OK button.
Page D.7 - 28
Data Exchange
Output File:
You can see the selected output file as this name is entered in the exchange file.
Input Field
Here, you enter the variable header area data or the part code (authorization). The authorization is entered in the header area and builds – together with a time mark – the code for the origin resp. the modification of a component part.
CAD / Static
the model data are exported as CAD system data (component parts) or as static system (bars).
Mixed
A file of CAD and static data is written. The CAD data are preferred and the static data describe the static system of these CAD data. This is an option for a later implementation degree.
Page D.7 - 29
Data Exchange
PS3-Interface (ProSteel Standard) The ProSteel standard interface is an exchange format of its own to put the ProSteel model data at the disposal of other programs. The format puts a rather exact copy of the construction including detailing processes at disposal. This is the reason why foreign programs can evaluate its data for their different requirements. File Format: ASCII text file with the extension *.ps3 The file structure follows the example of Windows *.ini files and is mainly selfexplaining. The complete data records are always output serially for each single component part. References don‟t have to be resolved during evaluation. In addition, references are created by indication to permit this kind of evaluation, too. You can obtain a detailed description of the data structure for the development of your own import routines in your programs at any time you like. Data Export ProSteel is able to export the model data including detailing processes, group structure; parts list data and drawing information. In addition, the used bolts are output, too. Concerning detailing processes, holes, cuts, polycuts and rectangular copes are transferred at the very moment. In case of detailing by means of Boolean operations between the component parts, this information will be lost because they are not evaluated. Furthermore, only the names of special shapes are transferred at the moment, but not their cross-sections.
Page D.7 - 30
Data Exchange
Group Others Bolts
All bolts existing in the model and being assigned to a group are output.
Processing
the processing of component parts is output. Apart from that the output is only limited to the position of shapes and plates as well as to their parts list data to keep the file small e.g. for mere parts list programs.
Sum up
Groups and single parts having the same position number are summed up to one entry and the corresponding number of pieces is indicated. In this case, the exported geometry and drawing data can only partly be used because they only refer to the first part acquired by chance. This option is, however, reasonable for the evaluation of parts list data because it can help to minimize the data record considerably.
Group Floating Point Output Length/Size
Here, you enter the accuracy for all values except for the coordinate points. It is always the complete number of digital places which is exported, if need be they are filled up with noughts.
Coordinates
Here, you enter the accuracy for all values of CAD-coordinate points. It is always the complete number of digital places which is exported, if need be they are filled up with noughts.
Inches
In drawings, the sizes are output in the imperial system e.g. 1´-2 3/8´´. Otherwise, the decimal value is output in inches (in our example 14.375).
Page D.7 - 31
Data Exchange
PSB-Interface (ProSteel Object-Exchange Data) The PSB-interface serves for the exchange of models within ProSteel on the different 3D CAD systems supporting the operation of ProSteel. Data exchange is based on CAL technology (CAD Abstraction Layer) by keeping the complete 3D model intelligence (such as e.g. the logical links of connections). File Format: binary file with the extension *.psb
Data Import All model data including detailing processes, structures and component part references (logical links) are entered which are necessary for the assembly of a complete ProSteel model. Afterwards, the model can be detailed with the same functionality as if it was created in the importing system.
Data Export ProSteel can export the 3D-model data including any detailing processes, structures and component part references (logical links). This means that all data necessary for the assembly of a complete ProSteel model in another ProSteel target system will be sent. Afterwards, this can be detailed with the same functionality as if it had been created there.
Page D.7 - 32
Data Exchange
STAAD III-Interface The STAAD III interface serves for the exchange of static systems between the programs of STAAD program family and ProSteel. Data can also be exchanged with any kind of software being able to interpret this format. File Format: ASCII text file with the extension *.std The exchange format corresponds to the output file of the graphic editor of this program family.
Data Import ProSteel is able to evaluate the static system data for standard shapes, i.e. the position of the parts in the space including eccentricities. Please note that it is not possible to interpret all shortened display forms like REPEAT etc. in the data format of the exchange file. The list shortenings of the form n TO m are, however, understood.
Data Export ProSteel is able to export the static analysis system for standard shapes. Depending on the settings on the page „General Settings‟, it is tried to determine even intermediate gussets for connections and eccentricities.
Page D.7 - 33
Data Exchange
STAAD.PRO Interface The STAAD.PRO interface serves for the exchange of static systems between the programs ProSteel and STAAD.PRO. Data can also be exchanged with any kind of software being able to interpret this format. File Format: ASCII text file with the extension *.std The exchange format corresponds to the output file of the graphic editor of this program family.
Data Import ProSteel is able to evaluate the static system data for standard shapes (from the single shape table in STAADPRO), i.e. the position of the parts in the space including eccentricities. Please note that it is not possible to support plates/sheet metal plates and shapes with double cross-sections, back/back cross-sections and weld shapes in this version.
Data Export ProSteel is able to export the static analysis system for standard shapes. Depending on the settings on the page „General Settings‟ it is tried to determine even intermediate gussets for connections and eccentricities.
Page D.7 - 34
Data Exchange
PXF-Interface The PXF interface serves for the exchange of constructions between the programs of REBIS program family and ProSteel. Data can also be exchanged with any kind of software being able to interpret this format. File Format: ASCII text file with the extension *.pxf
Data Import ProSteel can evaluate the data group 4000 for standard shapes, i.e. the position of the parts in the space. In addition, general data groups and coordinates that are necessary for transfer are evaluated.
Data Export ProSteel is able to export the data group 4000 for standard shapes. In addition, general data groups and coordinates that are necessary for transfer are exported.
Page D.7 - 35
Data Exchange
SDNF-Interface The SDNF interface (Steel Detailing Neutral Format) serves for the exchange of CAD-data between programs being able to interpret this format. A static analysis system can of course also be transferred via the shape position. File Format: ASCII text file with the extension *.sdf Data Import ProSteel is able to evaluate the CAD-system data for standard shapes and plates, i.e. the position of the parts in the space without detailing processes and connection elements. Plates, the contours of which are transferred as polygons are displayed correctly. If cuts or similar things created the shape, this information would be lost and only the mostly rectangular basic solid would be displayed.
Data Export ProSteel is able to export the CAD-system data for standard shapes and plates without detailing processes and connection elements. A plate made out of a number of polygons is exported correctly. If detailing processes created it, only the basic polygon will be output. In addition, the static analysis system for standard shapes can be written. Depending on the settings on the “General Settings” page, it has tried to determine intermediate gussets for connections and eccentricities.
Page D.7 - 36
Data Exchange
Input Fields
Here, you enter the variable header area data of the SDNF-file.
Units
Here, you can choose the units for the output of length and coordinate values. In combination with a suitable exchange list it is thus possible to create a file with imperial units from a metric drawing file or vice versa.
Degree of Implementation The implementation corresponds to standard SDNF-3.0; the following elements are supported in exchange: Packet 00 Packet 10 Packet 20 Packet 22 Packet 60
Head Data (Title Packet) Straight Standard Shapes (Linear Member Packet) Polygonal Plates (Plate Element Packet) Drill Holes (Hole Element Packet) Bent Shapes (Arc Member Packet)
Page D.7 - 37
Data Exchange
KISS-Interface The KISS interface (Keep It Simple Steel) provides for the exchange of parts list data between programs, which are able to interpret this format. Therefore, only export is possible here. File Format: ASCII text file with the extension *.kss Data Export ProSteel is able to export the parts list data of single parts such as shapes and plates. Since the KISS format only indirectly supports the group structure, you can determine the belonging to a certain group by means of dispatch number, but this is lost in case of similar parts in different groups because each part is only exported once with its total amount.
Group Others Customer
Here, you enter the variable header area data of the KISS-file.
US-mark Number: The US-mark-number of the corresponding group the part is assigned to is exported as shipping number. Otherwise, the position number of the group the part is belonging to will be exported. When the component part doesn‟t belong to a group, no shipping number will be exported. When it belongs to different groups, the selected number of the group which was found first will be exported.
Page D.7 - 38
Data Exchange
Group Annotation Note
Here you specify which part data have to be exported as note into the file. No – A note is not exported. Note 1 – The content of the note field 1 of the parts properties is exported. Note 2 - The content of the note field 2 of the parts properties is exported.
Group Surface Surface
Here you specify which part data have to be exported as surface into the file. No – A surface is not exported. Note 1 – The content of the note field 1 of the parts properties is exported. Note 2 - The content of the note field 2 of the parts properties is exported.
Group Format Default Format Default
Here you specify the output format of the part designation depending on the indicated part type as a combination of format variable and constant terms. The output can be set separately for flat steel, plates and standard shapes.
Page D.7 - 39
Data Exchange
Switches
If the switch is checked, the program uses the format default specified by you. Otherwise, the standard export designation of ProSteel is used instead.
Input Field 1
Here you specify the format description for the name of the part.
Input Field 2
Here you specify the format description for the length of the part.
BUTTON (X)
The format default is reset to a given standard value.
Description of Format Variables All format variables are in round brackets and inside of these brackets, they start with a $-sign which identifies them as variable. Then the format specifications for the desired dimension, unit system, display and accuracy follow in exactly this order. Dimension
L W T
length of the part width of the part height or thickness of the part
Units
c i m
output according to the unit system of the drawing output always in inches output always in millimetres
Display
d f
floating point number fraction (only with inches)
Accuracy
0..8 number of digits after the decimal point or parts of fraction (1/2n)
Thus, the format variable ($Lif3) means that the length of the part is exported in inches with fraction display and an accuracy of 1/8 inch, e.g. 10-3/8. If you require e.g. the specification of a plate with the thickness in inches as fraction (with an exact accuracy of 1/16 inch) as well as with metric dimensions for width and length having each one digit after the decimal point in the form PL3/4x200.0 or for the length 300.0, you have to set the default PL($Tif4)x($Wmd1) in the first input field and the default ($Lmd1) in the second input field.
Page D.7 - 40
Data Exchange
CIMSteel/2-Interface The CIMSteel/2 interface is an internationally used exchange format of structural analysis and production data which is supported by many other programs as an industrial standard. File Format: ASCII text file with the extension *.stp Data Import ProSteel can evaluate the CAD system data of standard shapes and plates, i.e. the position of the component parts in the space including detailing processes such as drill holes or cuts. In addition, the structural analysis system for standard shapes can be read, i.e. the position of the component parts in the space including the eccentricities. ProSteel can automatically differentiate between the different types of CIMSteel/2. Data Export ProSteel can export the CAD system data of standard shapes and plates, including detailing processes such as drill holes or cuts. In addition, the structural analysis system for standard shapes can be written. In the export dialog, you can previously select whether the complete CAD data have to be exported or only the structural analysis system.
Page D.7 - 41
Data Exchange
Degree of Implementation The implementation corresponds to CIM Steel Integration Standards Release 2. The file format is according to standard ISO 10303-21:94 (with the entity definition according to LPM6). ProSteel can export 3 different types of CIMSteel/2 data models with the entity definition on certain levels. Static Data (Analysis Model) Gusset points of standard shapes including eccentricities, cross-sections of shapes and material. CAD-Data (Design Model) Position and length of standard shapes, outer geometry of sheet metal plates, cross-sections of shapes and material Manufacturing Data (Manufacturing Model) Position and length of standard shapes, outer geometry of sheet metal plates, cross-sections of shapes, material, volume properties (e.g. drill holes, oblong holes, intersections)
Page D.7 - 42
Data Exchange
D.7.8
Previous Interfaces
In the following chapter, you will find the description of the interfaces, which have already been integrated, in ProSteel for quite some time. They cannot or not yet be controlled via the common import and export dialog. You can reach these interfaces by their own command names and each single interface has its own user control, which often differs from the others. This does not mean that the used file format corresponds to an outmoded state. The content of the data is always on the latest passed version of the standard committees. All these formats have proved their worth in practice and are intensively used there.
Page D.7 - 43
Data Exchange
DSTV PPS Interface Using this interface, data can be transferred from the parts lists under ProSteel to a PPS (Productions, Planning and Control) program. The data is transferred as an ASCII-file. PPS-data generation is made according to the rules of the DSTV interface description CAD parts lists issued in November 1997 (3rd. edition). After having created your 3D-model and carried out positioning (basic requirement), the PPS data can be generated. Use ProSteel menu item OTHER / GENERATE PPS-DATA.
Title Block Data Here, the title block data of the data records 1 through 5 of the PPS file are defined. Work No.
Enter the work no. (max. 2 digits). It will appear in data record No. 1 of the PPS file.
Order No.
Enter the order no. (max. 8 digits). It will appear in data record no. 2 of the PPS file.
Drawing No.
Enter the drawing no. (max. 3 digits). It will appear in data record no. 4 of the PPS file.
Page D.7 - 44
Data Exchange
Index
Determine the revision index (1 character) of the drawing. It will also appear in data record no. 4 of the PPS and is added to the drawing number. A revision index defined in the title block (Rev. Index) will make this information superfluous.
Prepared by
Specify the person in charge by a name (max. 12 characters). The name will appear in data record no. 5 of the PPS file. Definition of a name in the title block will make this information superfluous.
Output Weight
Output of internally calculated weights. Otherwise, no output will take place, and the values will be given by the PPS.
Output Area
Output of internally calculated surfaces. Otherwise, no output will take place, and the values will be given by the PPS.
Accord. to DSTV The order of the panels is according to the DSTV standards. Apart from this, you can determine yourself the order by entering the values 1-27 in the input fields under Panel Order. Material=Name+ the name of the component part is set in front of the material name. Header
The header is output
Bolt Quality
At the output of bolts, the bolt quality is output.
Separator
The delimiters of data records are determined.
Point at Dec.Val. If this field has been checked, a point is used for decimal values instead of the comma. Insert NC-Dat..
If this field has been checked, NC production data are output as well.
Without Group
If this field has been checked, no groups (main parts and accessory parts) are output, but all component parts are output as single parts.
Title Block
Here you find the optional fields of the drawing‟s title block. They will all appear in data record no. 9.
Revision Index
Define the revision index (1 character) of the drawing. When this panel is used, the Title Block Data / Index panel will be superfluous.
Group
Identifier of groups consisting of 3 characters
Name
Group name consisting of 30 characters
Page D.7 - 45
Data Exchange
Surface
Surface finish
Addition %
Addition to weight in percent
Prepared by
Name of the person in charge of TB
TB-Date
Input of TB-date
Approval
Date on which the drawing has been presented for approval.
Approved
Date on which the drawing has been returned after approval.
Test Eng.
Date on which the drawing has been transferred to the test engineer.
Release Product. Date of release for production Field Order
All fields available for output
Order
List of fields to be used
Length Tolerance Tolerance value which is used to combine the output of component parts with similar length to one entry. Path
Output path of the file. Specify the path and the name of the PPS data output file via the left button. PPS-file name and path can be freely defined by the user. If possible, it should contain the order number and a drawing number. Output of PPS-file is started.
The material designations correspond to the standard names for data transfer of steel construction issued in August 1993 (2nd. edition). Hints for Transfer to Knierim Since the Knierim system cannot process different groups of components having the same main part as pos. no. 12.1 or12A, these groups require special handling. In such cases, use the option ‚25=Max+1‟ at positioning. Thus you obtain different position numbers for such cases. The Knierim system will accept these numbers without any problem since they are handled as Zparts. If you want all component groups to be handled as Z-parts, turn off the option „Transfer Mainpart Group‟ and enter a start value for group positioning.
Page D.7 - 46
Data Exchange Example for the Output of a PPS-File ************************************************************ ** PPS-DATA FILE created by ProSteel PPS-MODUL V 1.00** ** ** Time 13:49 ** Date 25. 7.1996 ** ************************************************************ 0&@ 1&11 2&2222222 4&33&3 5&gggg 9&&&&&&&&&&& S&M 16 x 70 DIN 6914&70&40&5000&6&&&&&&&&&&&&&&&&&&&1 H&FL 120x20&315&120&11&2&&&&&&&&&&&& 18.876&&&&&6&&1 H&BRFL 160x15&239&160&14&2&&&&&&&&&&&& 18.876&&&&&4&&1 H&BLECH 8x791x864&864&790&8&1&&&&&&&&&&&& 26.187& 0.416&&&&&&1 H&IPE 240&3481&120&4&1&&&&&&&&&&&& 30.700&&&&&&&1 H&BRFL 240x15&309&240&12&2&&&&&&&&&&&& 28.314&&&&&2&&1 H&BLECH 8x488x499&499&488&10&2&&&&&&&&&&&& 7.661& 0.122&&&&&&1 H&BRFL 160x10&698&160&9&2&&&&&&&&&&&& 12.584&&&&&&&1 H&BRFL 200x10&1030&200&6&1&&&&&&&&&&&& 15.730&&&&&&&1 H&BLECH 10x84x95&95&84&18&4&&&&&&&&&&&& 0.423& 0.005&&&&&&1 S&M 16 x 60 DIN 6914&60&30&5001&12&&&&&&&&&&&&&&&&&&&1 H&BLECH 10x95x168&168&94&15&2&&&&&&&&&&&& 0.423& 0.005&&&&&&1 H&BLECH 10x65x114&114&65&17&4&&&&&&&&&&&& 0.247& 0.003&&&&&&1 H&BRFL 200x10&985&200&7&1&&&&&&&&&&&& 15.730&&&&&&&1 H&BRFL 200x10&280&200&13&1&&&&&&&&&&&& 15.730&&&&&4&&1 H&HE 200 A&3850&200&2&1&&&&&&&&&&&& 42.300&&&&&9&&1 H&IPE 240&4317&120&1&1&&&&&&&&&&&& 30.700&&&&&&&1 H&HE 140 A&580&140&5&1&&&&&&&&&&&& 24.700&&&&&1&&1 H&FL 140x20&152&140&16&1&&&&&&&&&&&& 22.022&&&&&4&&1 S&M 16 x 45 DIN 7990&45&20&5002&4&&&&&&&&&&&&&&&&&&&
Page D.7 - 47
Data Exchange
DSTV Structural Output Using this interface, information from a structural analysis program (e.g. Dlubal) can be directly transferred into your model, provided that the structural analysis program is in compliance with the DSTV interface convention Structural Analysis / CAD issued in February 1992.
This interface can read and process data as described herein. Please note that the format mentioned previously does not give port definitions. Only the correct shapes can be entered in the defined position. Herein, the bi-directional information flow of the static CAD static is described. At the very moment, only the flow static CAD has been implemented. Import File
Give full description of the path of the data record to be read in or select a file by clicking the ‟File‟ button on the right. Data records of any static data end with *.sc2.
Export File
This option has not yet been implemented.
System Lines
All system lines being defined by the data are created. They are filed in the layer PS_RAHMEN.
Insert Shapes
All defined shapes are inserted. First, no optimizing is made. Collinear shapes of identical type and alignment are not combined. Such shapes are due to the fact that structural analysis is made from one junction point to the next, whereas a shape can stretch over several junction points.
Page D.7 - 48
Data Exchange
Connect Elements This option activates optimizing. Shapes of the same type and of same position are combined in a way that a shape has maximum length. Collinear Tolerance This value in mm indicates up to which distance segments can be considered as collinear and thus suitable for connection. Angle Tolerance This value in degrees indicates up to which angle distance segments can be considered as collinear and thus suitable for connection. Shape Table Since the shape designations used in the different structural analyses are not always identical to those used by ProSteel, you will be asked when entering a file with an unknown designation. After selection of shape table, the following dialog window opens. Here, you can manage and delete the entered data, or even enter new data.
Page D.7 - 49
Data Exchange
DSTV NC Data Output This interface gives you the opportunity to generate your NC data directly from within your ProSteel model. For this purpose, the program creates a manufacturer-independent NC file in ASCII format, which you may use for further processing with the postprocessor of your NC- machines. The generated NC data are production-means-neutral. The NC data generation is carried out according to the standards “Standard Description of Steel Construction Parts for the NC-Control” of the DSTV th association issued in July 1998, 7 revised edition. General This is a standard interface of geometries for steel construction parts concerning the NC production operations sawing, drilling, burning, punching and signature with the goal to be independent from NC-machine manufacturers, which means that NC-machines are exchangeable as long as the same data processing organization exists. The interface uses standardized controls to regulate the link between CAD and graphics system to the NC controls via the CAM level. The part‟s geometry is made available to the interface regardless of the type of production operation and then forwarded to the NC-machine via the NCmachine-specific postprocessor.
Page D.7 - 50
Data Exchange NC-Data Output After you have created your 3D model and performed a positioning (prerequisite), you may generate your NC data. This is done with the ProSteel menu option OTHERS / NC DATA GENERATION or by using the PS_NC_DATA command. The following dialog box appears after the command has been selected:
Format
Choose the output format. You can either create a format according to DSTV or a DXF-output for plates.
Order No.
Here you enter the max.12 digits of the order number, which will later be the first entry in the parts description header in the NC file.
Drawing No.
Here you enter the max.12 digits of the drawing number, which will later be the second entry in the parts description header in the NC file.
Overwrite
any existing file with the same name will be overwritten without asking for confirmation first.
Straight End
If this option is activated, every shape, if it is a straight one with an uncut end, will be turned so that this end is viewed as the shape start.
Page D.7 - 51
Data Exchange
Sign
This enables you to indicate a signature block.
3D Cuts
If this option is activated, 3D cut information is created. This information consists of a SC-record with base on the cutting plane and the cutting plane perpendicular.
3D Holes
If this option is activated, three-dimensional holes are indicated with one originating point and the perpendicular of the hole.
Metric Output
If this field is checked, the NC-data are principally output in the metric unit system. Otherwise, the unit system of the current drawing will be used.
Upper Edge Mod.The output is arranged in a way that the parts are situated as in the model, i.e. the upper edge is at the top, no matter of the parts ECS position. Insert ProSteel
The ProSteel header is inserted into the file. There you will find information about date, etc.
Max. Hole Offset Here, you can indicate a maximum distance of the hole center to the outer edges of the part (reference area) to the inside, up to which a hole is still assigned to this view. This may be important for special shapes. Shapes as Acis Shapes are converted into an ACIS-model before output. Plates as Acis
Plates are converted into an ACIS-model before output.
Powder Lines
The powder lines of the tight fitting add-on parts are created for main parts.
INSERT Click on this button to start the NC-output. You are prompted to select the parts for which the NC-data have to be generated. After all parts have been selected, the parts structure is analysed and the corresponding data records of the NC-file are generated.
Page D.7 - 52
Data Exchange Sign
Position No.
The position number is entered into the signature text.
Send No.
The dispatch number is entered into the signature text.
Job No.
The order number is entered into the signature text.
Drawing No.
The drawing number is entered into the signature text.
Label
The shape name is entered into the signature text.
Note
The comment row 1 is entered into the signature text.
After Input
The text of the input field is entered into the signature text.
Position
Select the position of the signature text.
Text Size
Select the text size of the signature text in mm.
Input Field
Enter here any additional input text.
Page D.7 - 53
Data Exchange DXF Options
You can specify the layer names and the colours for the DXF-output of plates. Contour Layer
Name of the outer contour layer
Contour Colour
Colour number of the layer
Inner Contour Layer Name of the inner contour layer Inner Contour Colour Colour number of the layer Hole Layer
Name of the hole layer
Hole Colour
Colour number of the hole layer.
Text Layer
Name of the text layer
Text Colour
Colour number of the layer
Line1/2
Any additional text which is written into the output file (Bottom corner on the left of output); wildcards may be used. The list of wildcards is as follows:
Page D.7 - 54
Data Exchange
%DAY% %MONTH% %YEAR% %HOUR% %MINUTE% %DWG_PROJECT_NAME% %DWG_ORDER_NAME% %DWG_PROJECT_NUMBER% %DWG_ORDER_NUMBER% %DWG_DRAWING_NAME% %DWG_DRAWING_NUMBER% %DWG_DRAWING_INDEX% %DWG_CREATED_NAME% %DWG_CREATED_DATE% %DWG_CHECKED_NAME% %DWG_CHECKED_DATE% %DWG_CLEARED_NAME% %DWG_ CLEARED _DATE% %DWG_LVPOS1% %DWG_LVPOS2% %DWG_LVPOS3% %DWG_LVPOS4% %DWG_COMMENT1% %DWG_COMMENT2% %DWG_COMMENT3% %DWG_COMMENT4% %DWG_CUSTOMER% %DWG_DRAWING_PAGE%
file creation date file creation date file creation date file creation time file creation time Project name Order name Project number Order number Drawing name Drawing number Drawing index Created by Created on Checked by Checked on Cleared by Cleared on LV Pos1 LV Pos2 LV Pos3 LV Pos4 Comment1 Comment2 Comment3 Comment4 Customer Drawing page
If the part belongs to a group %GROUPNAME% %GROUPNOTE1% %GROUPNOTE2% %GROUPPOSNUM% %GROUPSENDNUM% %GROUPARTICLE% %GROUPCOUNT% %GROUPTOTALCOUNT% %GROUPFAMILYCLASS% %GROUPWEIGHT% %GROUPLENGTH% %GROUPWIDTH% %GROUPHEIGHT%
Group name Comment 1 Comment 2 Position number Shipping number Article number Number of groups Overall number Family class Group weight complete group length complete group width complete group height
Page D.7 - 55
Data Exchange
For all other objects (if available) %NAME% Name %TRANSPORTNAME Transport name %INTERNALNAME% Internal Name %KEY% Shape key %NOTE1% Comment1 %NOTE2% Comment2 %KATALOG% Catalogue %POSNUM% Position number %SENDNUM% Shipping number %ORIGINALNUM% Original Position number %ARTICEL% Article number %HANDLE% AutoCAD Handle %STYLENAME% Name of detailing style %MATERIAL% Material number %COUNT% Quantity %TOTALCOUNT% Total quantity %PARTART% Part Type %DISPLAYCLASS% Display class as number %AREACLASS% Area class as number %FAMILYCLASS% Family class as number %PPSZPART% Marker for PPS output %AREACLASSNAME% Area class %DISPLAYCLASSNAME% Display class %FAMILYCLASSNAME% Family class %SHAPECLASS% Shape class %COLORINDEX% Object colour %FREEDESCRIPTION% Additional description %LENGTH% Length %WIDE% Width %HEIGTH% Height %SLOPEDHEIGTH% Sloped height %WEIGHT% Weight %CUTAREA% Cut area %PAINTAREA% Paint area %LENADD% Additional length %INSERTX% Insert offset X %INSERTY% Insert offset Y %SCALE% Scaling factor %TENSION% Tension (bolt) %DM% Diameter (bolt)
Page D.7 - 56
Data Exchange
%KLEMMLEN% %MOUNTINGBOLT% %ORIGIN% %XAXIS% %YAXIS% %ZAXIS% %GROUPREL% %MODIFYFLAG% Text Height
Clamp length (bolt) Bolt type Point of insertion X-axis Y-axis Z-axis Group relevation Modify flag
Height of the output text of line1 and line2
Slotted Hole as Two Holes A slotted hole is exported with two holes instead of with one. Decimal Point
Defines the number of exported digits after the decimal point of the DXF output. This influences the accuracy of the exported DXF files.
DXF-Output as 2D The exported geometry is exported as plane contour. All z-coordinates of the geometry are reset to 0 at output. The option Use Arcs and Lines instead of Polyline serves for division of polylines into arcs and lines at output.
Page D.7 - 57
Data Exchange Output Path
Folder Path Where your output files have to be filed. Folder Name
For output, a directory of this name is created under a path and the individual files are stored there.
File Appendix
Define how the annex to your files has to look like(.nc, .output, ...)..
Use Drawing
The drawing name is used as directory name.
Put P first
A „P‟ is put in front of the file name which is formed on the base of the position number. Permits to look at created NC-files and to modify them
Page D.7 - 58
Data Exchange
All files in the indicated directory are deleted when you click on this button. This function creates a block in the drawing from a NC-file. Only outer contour and drill holes are created. Without outer contour, no drill holes will be created.
Example for the Output of a NC-File ST 123 125 3 3 RST_37-2 1 HE200B I 2980.00 200.00 200.00 15.00 9.00 18.00 61.30 1.15 0.00 0.00 0.00 0.00 BO o o EN
492.48o 492.48o
140.00 22.00 0.00 60.00 22.00 0.00
Page D.7 - 59
Data Exchange
Page D.7 - 60
Appendix
E Appendix
Page E - 1
Appendix
Page E - 2
Structural Element Staircase
E.1
Structural Element Staircase
This function generates a complete staircase construction with several stair heads including handrail and corresponding working frames. This requires that you just click the starting point and a point in the direction of the stairs (treading direction). The number of required individual steps will be automatically calculated based on your specifications. This is followed by a dialog where you can set the specifications while verifying your input directly and immediately on screen. The dimensions of the staircase can be changed at a later time by modifying the (yellow) object frame using its grips. For a staircase with several stair heads you can add the floors one after the other in the open dialog. The complete construction including the handrail can be saved afterwards as template. For later staircase tower constructions, it is possible to create an assembly of standards which can be adapted to the local conditions if need be. Here you see a staircase with intermediate stair head and bent running as created from a template:
Page E.1 - 1
Structural Element Staircase
Dimensions
Width
The width of the staircase across outer steel edge
Length
Entire length of the stair construction
Height
The height of the staircase from starting point to upper edge stair head including gridiron.
Riser
The desired rise of the staircase steps
Upper Insertion Point If this field is checked, the insertion point is on the upper side of the staircase instead of on the lower side (and it is running to the bottom) Riser Count
The resulting number of steps
Angle
The resulting gradient of the staircase
Treading real
The resulting exact treading depth of the steps; however, you can specify a fixed value before and the construction will be calculated again based on this value.
Actual Rise
The resulting exact rise of the steps; however, you can specify a fixed value before and the construction will be calculated again based on this value.
Dynamic
If this field is checked, you can monitor the changes of the settings immediately on screen.
Page E.1 - 2
Structural Element Staircase
Landings
Lower Landing
The length of the lower stair head. to create the stair head, you have to check the input field in front of it. Otherwise, the staircase cheeks are cut at the basic plane and the stair head is omitted.
Upper Landing
The length of the upper stair head
Create No Upper Platform No landing is created at the upper end of the staircase. The staircase shapes are cut off perpendicularly. US-Definition
The definition of the landing lengths is made according to American Standard.
Stair Foot Length
Enter the dimensions of the staircase foot. If you enter the value 0, the staircase cheek directly hits the basic plane.
Page E.1 - 3
Structural Element Staircase
Vertical Section Enter a vertical cut from the front edge of the staircase cheek. This field is only available if no length was specified for the staircase foot, i.e. if the staircase cheek directly hits the basic plane. Ground Distance Here, you can insert a gap between the staircase foot and the basic plane, e.g. to have enough space for a completing construction or for foundations. This field is only available if no length was specified for the staircase foot, i.e. if the staircase cheek directly hits the basic plane. Web Grating
Height of the attached gridiron
Side Offset
The projection of the attached gridirons beyond the outer edge of the staircase construction. Negative values decrease the dimension of gridirons.
Upper Edge Equal The upper edge of the inserted gridirons are mounted equal to upper edge lateral parts. The side offset is set to 0.
Platforms
Page E.1 - 4
Structural Element Staircase
No. of Platforms Enter the number of floors (intermediate stair heads). Inner Distance
Enter the measure between two staircases (including cheek shapes) if the intermediate stair heads are stair heads for change over.
Platform No.
Select the floor you want to process.
Angle to prev.
If you enter an angle here, you can create the bent running of the staircase or stair heads for change over (180°). Negative values create an opposite sense of rotation.
Length, Height... Please refer to the figure below for exact meaning of the distances. Here you see the most important measures of a staircase with intermediate stair heads and stair heads for change over (standard version):
Page E.1 - 5
Structural Element Staircase
Shapes
Shape Type etc. Here, you select the shapes for the stair and the stair head cheeks.
Bolts
Drill Stringer
Page E.1 - 6
If this field is checked, the stair cheeks are drilled to permit bolting the steps or the handrail.
Structural Element Staircase
Bolt .../Handrail
If this field is checked, the cheeks and the handrail are bolted, if a handrail exists. Select the required bolt type in the selection list.
Bolt .../Step
If this field is checked, the cheeks and the steps are bolted. Select the required bolt type in the selection list.
Steps
Create Steps
If this field is checked, the staircase steps are generated. You can choose between standard steps, shape steps and block steps. When you have selected shape or block steps, you can select the shape type or the block in the selection lists as usual.
Increment
Enter the depth of the staircase steps.
b,c,d
Distances for the mounting holes of the staircase steps. b is the distance of the holes from the upper edge of the steps, c is the height of the fastening of staircase steps, d is the hole spacing of both mounting holes.
Hole Distance
The distance of the axes of the steps‟ mounting holes
Hole Dia.
The hole diameter of the steps‟ mounting holes.
Slot Length
The distance of the axes of the rear oblong step hole.
Page E.1 - 7
Structural Element Staircase
Offset
The offset of the staircase steps from the front edge of the staircase to the back. Negative values move the steps to the front.
Handrail
Create Handrail If this field is checked, a handrail is added to the staircase. Simplified
The handrails are not modelled, but only displayed as system lines.
Start Offset
Here, you enter an offset value which moves the start of the handrail from the front edge of the staircase to the back. Negative values move the handrail to the front. In case of staircases without basic stair head, you can move the start of the handrail to a position where a bolt mounting is possible.
End Offset
Analogously to start offset, you enter here an offset value for the end of the handrail.
Side Offset
Here, you enter an offset value that moves the handrail from the outer edge of the staircase to the outside. This permits you to mount the handrail outside the staircase on other shapes or on the wall.
Height Offset
Here, you enter an offset value that moves the handrail from the upper edge of the staircase cheek to the top. This permits you to attach a grout or an individual fastening.
Page E.1 - 8
Structural Element Staircase
Connection
Here, you specify the bolting of handrail and staircase cheek. Automatic – The program tries to determine the most suitable fastening. Vertical - The handrail is always bolted on the staircase cheek from above, independently of the settings in the used handrail template. By Side – The handrail is always bolted laterally on the staircase cheek, independently of the settings in the used handrail template. Individual – The settings in the handrail template are used.
Side Offset
If you enter a value bigger than 0 in this input field, a vertical connecting plate is inserted between plate and staircase cheek in case of lateral mounting.
Hand. Template Select the template to be used for the handrail in the selection list. This template describes the exact structure. Click this button to preset the handrail structure (shapes, distances, etc.) or to edit the used handrail template. Another dialog opens then which is identical with the structural element „Handrail‟. Thus you can refer to this dialog for further information. At staircases with handrail, this handrail will be created as structural element of its own. This permits you to construct and modify the handrail in detail independent of the staircase.
Page E.1 - 9
Structural Element Staircase
Work Frame
Created Views
A separate working frame can be created showing a direct overview on the staircase to allow for better working at the staircase within the bounds of a bigger construction. By clicking the fields Front View, Lateral View Left, Lateral View Right or Top View, you can create the corresponding working frame.
Group Name
Enter the general name of the working frame.
Edge Distance
If you enter a value here, the size of the different frames is decreased. Therefore you can better select frames which are lying next to each other.
Assignments As it is the case with each dialog creating component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Page E.1 - 10
Structural Element Handrail
E.2
Structural Element Handrail
This function generates a handrail along a previously drawn 3-dimensional polyline. After calling the function, you will be prompted to pick this polyline, and the program then constructs the handrail along this line. You can choose between a parametrical construction of the handrail and a construction by user-defined blocks. At parametrical construction, all component parts are directly created from the default settings in your dialogs. At the second variant, you use any user-defined blocks which will be automatically adapted within certain borders. After the command was selected, a dialog opens where you can set the specifications while verifying your input directly and immediately on screen. The spatial development of the handrail may still be modified at a later time by changing the polyline using its grips.
Generalities
Layout
Here you determine whether the handrail has to be carried out as parametrical construction or with user-defined blocks. When you selected parametrical construction, you will find all further settings in the section „Dimensions‟. When you selected blocks, you will find all further settings in the section „Blocks‟.
Dynamic
If this field is checked, you can verify the modified settings directly and immediately on screen. A modification of the polyline has immediate effects, too.
Page E.2 - 1
Structural Element Handrail
Draw Diagonal
If this field is checked, an auxiliary diagonal of the actual structural object is drawn in the different segments to facilitate its selection.
No Auto-Update
If this field is checked, you can manually release the update of the handrail by pressing a button.
Group Status
Here you determine whether another parent group has to be formed out of all handrail components (including their inner group structure). You can choose between No Group, Component Part Group and Assembly.
Group Name
Here you indicate the name of the parent group. Wildcards for the overall dimensions ($(L), $(W), $(H)) are permitted.
For more detailed information about the group structure, please refer to the section about workshop drawings in this chapter.
Dimensions
Connection Height
The distance between the drawn polyline and the beginning of the posts including possible fastening plate.
Railing Height
The distance of the upper edge of the newel posts or the center of the railing head (if in place) measured perpendicular to the polyline.
Upper Rail Height.
The center distance of the upper knee-high rail (if in place) measured perpendicular to the polyline.
Page E.2 - 2
Structural Element Handrail
Middle Rail Height
The center distance of the middle knee-high rail (if in place) measured perpendicular to the polyline.
Lower Rail Height
The center distance of the lower knee-high rail (if in place) measured perpendicular to the polyline.
Handrail Radius
Radius of the railing head at the corners of the handrail. If a radius is specified the corresponding shape bends are applied; otherwise a mitred joint is cut.
Knee Rail Radius
Radius of the knee-high guardrail at the corners of the handrail. If a radius is specified the corresponding shape bends are applied; otherwise a mitred joint is cut.
Kick Plate Radius
Radius of the baseboard at the corners of the handrail. If a radius is specified the corresponding shape bends are applied; otherwise a mitred joint is cut.
Thickening Dia.
Here you indicate the thickening radius at the gusset points between posts and e. g. knee-high guardrails.
Example for a thickening between posts and knee-high guardrails
Page E.2 - 3
Structural Element Handrail
Post Distance
Post Spacing
Here you specify the approximate spacing of the rail posts within the individual polyline segments. Normal – The segment is regularly divided and the predetermined post distance is adapted. Adapt First – The post distance of the default setting is kept and only the first part of the segment is corrected. Adap tLast – The post distance of the default setting is kept and only the last part of the segment is corrected. Adapt First/Last – The post distance of the default setting is kept and only the first and the last part of the segment are corrected equally.
Post Distance
The distance of the rail posts within the individual polyline segments. Depending on the setting, the program uses this information to space out the newel posts in regular intervals and rounds the value up or down as needed.
Maximum
If this button is checked, the values of the determined post distances are never rounded up. The post distance is regarded as the maximum value. If necessary, additional posts are inserted.
Edge Offset
The spacing of the corner posts between two handrail segments starting with the intersection of the polyline segments.
Page E.2 - 4
Structural Element Handrail
Min.Segment Length The minimum length of a handrail segment from which on posts are created. Thus you avoid e. g. the creation of posts at the inner edge of intermediate landings at staircases with changing direction. Min.Segment 2nd Post The minimum length of a handrail segment from which on two posts are created at the beginning and at the end. If the actual length is smaller (but larger than the ‟Minimum Segment Length‟), only one post will be created in the middle of the segment.
Offsets
Posts Inside
If this field is checked, the end posts are moved to the inside. The post distances in the first and last segment are decreased by the value specified for the offset of the railing head.
Keep All Equal
If this field is checked, the default settings for railing head offset are used for all shapes.
Start Offset
Projection of the corresponding shape starting from the middle of the first rail post towards the outside.
End Offset
Projection of the corresponding shape starting from the middle of the last rail post towards the outside.
All Input Fields
Here you can individually determine start and end offset of the different shapes if the option „Keep All Equal‟ has been deactivated.
Page E.2 - 5
Structural Element Handrail
Segments
Create Segments
The handrail is subdivided into several independent segments, each having their own start, end and inner posts.
Length maximum... The indicated length is the maximum length of a segment and mustn‟t be exceeded. Segment Length
Defines the length of the different segments. It may be that the length is corrected, depending on the default settings of spacing.
Gap
Indicates the distance from 1 segment to the other.
Distribution
Here you indicate the distribution of the segment lengths along the length of the handrail segment. Equally means that all segments have the same length. Adapt First or Adapt Last means that all segments have the indicated length, but the first or the last segment is shorter.
Group Status
Here you determine whether another parent group has to be formed out of all segments (including their inner group structure). You can choose between No Group, Component Part Group and Assembly.
Group Name
Here you indicate the name of the parent group. Wildcards for the overall dimensions ($(L), $(W), $(H)) are permitted.
For more detailed information about the group structure, please refer to the section about workshop drawings in this chapter. End form
Page E.2 - 6
Structural Element Handrail You have the possibility to round off the railing head of the handrail at its corners in different ways or to combine it with the other component parts. These default settings can be individually determined for the beginning and the end of the handrail.
Transitions without End Offset Selection List
Here you specify the form of the handrail‟s end. Leave – No detailing takes place. Up to Outer Edge – The handrail is extended up to the outer edge of the post. Mitre Joint – The handrail and the end post are cut to build a mitre joint. Round Off – The handrail and the end post are combined by means of a bent part. Enter the radius in the Radius input field.
Radius
Indicates the radius for rounding off. It can be defined either as absolute value or as many times the amount of the handrail diameter. Enter e. g. *2.
Page E.2 - 7
Structural Element Handrail
Transitions with End Offset Selection List
Here you specify the form of the handrail‟s end. Additional shape parts are added in the handrail outside the end post. Leave – No detailing takes place. Mitre Joint – The additional shape parts in the handrail are cut to build a mitre joint. Round Off – The additional shape parts in the handrail are combined by means of a bent part. Enter the radius in the Radius input field.
Combine with
Here you specify up to which height the handrail has to be extended to the bottom. When you select knee-high guardrail above, center or below (if they exist), an additional perpendicular part will be added.
Radius
Indicates the radius for rounding off. It can be defined either as absolute value or as many times the amount of the handrail diameter. Enter e. g. *2.
Close
If this field has been checked, the handrail will be extended up to the end support after detailing.
Page E.2 - 8
Structural Element Handrail
Shapes Here you can select the shapes for the individual sections of the handrail. However, the corresponding section is generated only if checked appropriately in the check box. For example, if you would like to generate a handrail with only two knee-high guardrails, then deactivate one of the three options for knee-high guardrails. In the selection lists you can select the required shape as usual. All shapes are available for selection.
Click on the button to copy the default settings of another component part into the current selection. A small dialog opens where you can select the source. Thus it is e. g. possible to synchronize the settings for all knee-high guardrails.
Comp.Part Group
The settings are valid for the selected shape group.
Shape Class
The class or catalogue of the selected shape.
Shape Size
The size of the selected shape.
Shape Type
The type of the selected shape.
Insertion Plane
The insertion plane of the shape. Here you can choose between Center, Lower Edge and Upper Edge.
Angle
The rotation around the insertion axis.
Mirror
The shape is mirrored before insertion.
BUTTON +
The settings of another component part group are copied into the current selection.
Page E.2 - 9
Structural Element Handrail
Shapes Kick plate You can add a kick plate to the handrail. The kick plate will only be created, if you have added kick plates as shapes. In the selection lists you can select the required shape as usual. All shapes are available for selection.
Other Side
If this field is checked, the baseboard will be inserted at the other side of the railing posts.
Side Offset
You specify the distance of outer edge of railing post and inner edge of baseboard. This permits you to keep some space for individual fastenings or grouts.
Height Offset
The distance between the drawn polyline and the lower edge of baseboard. Negative values will move the baseboard towards the bottom.
Page E.2 - 10
Structural Element Handrail
Shapes Filler Rods You can insert additional vertical filler rods as safety device against falling through or as reinforcement between the handrail and the knee-high guardrails. The filler rods are distributed anew within two posts.
Min. Segment Length The minimum segment length (distance from one post to the other) from which on filler rods will be created. Edge Distance
The distance between the center of the first and last filler rod and the center of the corresponding handrail post
Intermediate Distance The distance of the center of two filler rods; this value can be corrected depending on the segment length. Distance Top
The distance between the filler rods and the upper insertion position.
Distance Bottom
The distance between the filler rods and the lower insertion position.
Insertion Offset
Filler rod offset from insertion plane towards the front or back side.
Insertion from
Here you select at which position the filler rods start (upper insertion position).
Insertion up to
Here you select at which position the filler rods end (lower insertion position).
Insertion Position
Here you select the depth position of the filler rods towards the knee-high guardrails. You can choose between front edge, center and rear edge.
Page E.2 - 11
Structural Element Handrail
Cut at
Here you select the bordering edge of the knee-high guard rails or handrail the insertion points of filler rods refer to. You can choose between inner edges, center and outer edges.
If Collision
Here you indicate how to treat a possible collision between filler rods and knee-high guardrails (e. g. in case of center position). Ignore – The collision is ignored. Divide – The filler rod is divided at the knee-high guardrails. Any information about distances top/bottom is taken into consideration anew for each divided rod. Perforate – The knee-high guardrails are perforated so that the filler rod can run through it.
Handrail segment with spacing bars between the handrail and the upper knee-high guardrail.
Page E.2 - 12
Structural Element Handrail
Posts You can taper the post on top or bottom by means of cuts in order to reach a better adaptation to the base plate or to the handrail.
Top horizontal
determines the horizontal length of the cuts at the upper end of the post. Two cuts are made, one at the outside and one at the inside of the handrail.
Top vertical
determines the vertical length of the two cuts at the upper end of the post.
Bottom horizontal
determines the horizontal length of the cuts at the lower end of the post. Two cuts are made, one at the outside and one at the inside of the handrail.
Bottom vertical
determines the vertical length of the two cuts at the lower end of the post.
Page E.2 - 13
Structural Element Handrail
Post Connection Here you select the fastening of the handrail posts. If None is checked, no fastening will be provided. If Vertical is checked, the plates will be perpendicular to the post (base plates). If Lateral is checked, plates or bent connections will be welded to the outside of the post.
Layout
Here you select how the handrail is fastened. Depending on selection, you have different possibilities which may also influence other dialog tabs.
Outside
If this field is checked, lateral connecting plates will be welded on the other side of the posts. This option is only available for lateral connections.
For Diagonals
If this field has been checked, you can specify other dimensions for diagonal handrail segments e.g. at a stringer. This option is only available for vertical connections.
Plate Layout
Here you indicate how the lateral connection plates have to be executed. This option is only available for lateral connections. Complete Plate – All plates are created with the complete dimensions. Shorten Outer – The plates at the two outside posts are cut at the outside to be flush with the support. Only Right Side – All plates are cut on the left side to be flush with the supports. Only Left Side – All plates are cut on the right side to be flush with the supports.
Page E.2 - 14
Structural Element Handrail
Projection Side
In case of plates which are cut to be flush (projection= 0) you can indicate a projection beyond the edges of the supports here and thus modify the plate size. Negative values will reduce the size of projection towards the inside. This option is only available for lateral connections. .
Plate Wiidth
Specify the width of the connecting plates.
Plate Length
Specify the length (height) of the connecting plates.
Plate Thickness
Specify the thickness of the connecting plates.
Hole Dia
Enter the diameter of fastening holes.
w (horizontal)
Enter the axis distance of fastening holes.
w (vertical)
Enter the vertical distance of fastening holes, if you selected lateral connecting plates. You can thus create a plate with four holes. If you enter the value 0, only two holes are created.
Zinc Hole Dia
Enter the diameter of an additional zinc outlet hole (center position towards post axis).
Side Offset
If you enter a value bigger than 0, a perpendicular connecting plate will be inserted between plate and post. If you indicated an „Inlet Radius‟ in addition, the additional plate will be omitted and the connection will be made as bent post.
Start Radius
If you enter a value bigger than 0, the connection will be made as bent post with perpendicularly welded plate.
As Poly-plate
If this field has been checked, a poly-plate will be created instead of a flat steel.
Turn by 90°
If this field has been checked, base plates will be rotated by 90°.
Plate Connections for Handrail Posts
Page E.2 - 15
Structural Element Handrail
Post Post-Handrail Here you select how to connect the different handrail posts with the handrail. Depending on selection, you can describe the connection in a more detailed way by means of further parameters.
Layout
Here you indicate the layout of the connection. Leave – No processing is made. Straight Cut – The post is shortened up to the lower edge of the handrail. Complex Cut – The post is adapted to the handrail by means of two simple diagonal cuts. With Rod – An additional shape is inserted between posts and handrail. Boolean – The post is exactly adapted to the handrail by means of a boolean cut.
Gap Distance
Here you enter an additional distance between post and handrail. When you have selected the „Rod‟ option, this is the length of the rod.
Cover Thickness
The thickness of an additional round cover plate at the upper edge of the post if the „Rod‟ option has been selected.
Cover Diameter
The diameter of an additional round cover plate at the upper edge of the post if the „Rod‟ option has been selected.
Page E.2 - 16
Structural Element Handrail
Post Post-Knee-high Guardrail Here you select how to connect the different knee-high guardrails with the posts. Depending on selection, you can describe the connection in a more detailed way by means of further parameters.
Layout
Here you indicate the layout of the connection. Leave – No processing is made. Straight Cut – The knee-high guardrail is divided into individual elements at the outer edges of the posts by means of straight cuts. Complex Cut – The knee-high guardrail is adapted to the post in question by means of two simple diagonal cuts and divided into individual elements. Drill – At the position of the knee-high guardrails, the posts are drilled so that the shapes can run through them as a whole. Boolean – The knee-high guardrails are exactly adapted to the posts by means of a boolean cut.
Gap Distance
Here you enter an additional distance between post and kneehigh guardrail if you have selected the „Straight Cut‟ or „Complex Cut‟ option.
Hole Diameter
Here you enter the diameter of the drill hole in the post if you have selected the „Drill‟ option.
Page E.2 - 17
Structural Element Handrail
Blocks Apart from the parametrical construction, you can build the handrail by using user-defined blocks. Different blocks are available for the post variants (e. g. beginning, end, corners) and fillings. You will find all necessary settings on this page and on the subordinate dialog tabs. Partly they are identical with those of parametrical construction. For more detailed information about selection and distribution of user-defined blocks, please refer to section „Working with User-defined Blocks‟ in this chapter.
Between Posts
Here you specify how the user-defined blocks have to be inserted in general. Leave – Only the post blocks are inserted. Connect Handrail –The post blocks are inserted and especially marked shapes are connected with each other (e. g. as handrail). Insert Inner Block – In addition, the blocks for the fillings are inserted. Insert and Combine – In addition, the blocks for the fillings are inserted and especially marked shapes of the post blocks are combined with each other (e. g. as handrail).
Block Directory
The directory with the user-defined blocks for the handrails; it contains further divided subdirectories for posts and fillings.
Page E.2 - 18
Structural Element Handrail
Blocks Post Distribution
The settings on this dialog tab correspond to the post distribution of parametrical construction. Please refer to this tab for more detailed information.
Blocks Segments
The settings on this dialog tab correspond to the segments of parametrical construction. Please refer to this tab for more detailed information.
Page E.2 - 19
Structural Element Handrail
Blocks Posts
Selection Lists
Here you select the block which has to be used for the corresponding post variant.
Group Status
Here you determine whether a parent group has to be formed out of the component parts of the posts. You can choose between No Group, Subgroup and Component Part Group.
Group Name
Here you indicate the name of the parent group. Wildcards for the overall dimensions ($(L), $(W), $(H)) are permitted.
Page E.2 - 20
Structural Element Handrail
Blocks Fillings
Filling
Here you select the block to be used for the filling of the handrail.
Width Adaptation
Here you specify how to adapt the inserted block of the filling in longitudinal direction to the current space between two posts. Leave – The block is not modified. Stretch Across Center – The block is stretched from the center to the left and to the right side. Stretch Poportionally – All elements of the filling are regularly stretched proportionally. Dynamic All, Start... – The elements are stretched dynamically within the indicated borders and multiplied. You can choose whether the length has to be balanced at the beginning, at the end or at beginning and end.
Check Block Sizes
When the width is adapted dynamically, the information included in the block is evaluated for the minimum/maximum distances (e. g. at vertical filler rods).
Group Status
Here you determine whether a parent group has to be formed out of the component parts of the fillings. You can choose between No Group, Subgroup and Component Part Group.
Group Name
Here you indicate the name of the parent group. Wildcards for the overall dimensions ($(L), $(W), $(H)) are permitted.
Page E.2 - 21
Structural Element Handrail
Assignments As it is the case with each dialog creating component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Working with User-Defined Blocks When you apply user-defined blocks, it is possible to create any handrail constructions you like which would be difficult to seize by means of parameters. Posts and fillings behave differently so that as many forms of handrails as possible may be created. The main problem is that the program has to select or modify the blocks defined by you in a suitable way to generate the handrail out of the determined poly-line. When the block templates are defined, you can add rules via part properties and block attributes how the component parts may be modified later. Any ProSteel component part or AutoCAD-element can be used for the definition of blocks. Additional ProSteel parts list information has to be added to the AutoCAD-elements.
Posts Posts are inserted at any possible corner and intermediate points of the polyline. You can specify different blocks for start, end and the straight intermediate points of the poly-line. In addition, you can determine different blocks for rightangled corners (+90° and -90° each) and for the angles deviating from this (positive and negative as well). However, only one deviating intermediate angle is possible. You could use corners of 45° beside the right-angled corners for your handrail, but not corners of 45° and 30° at the same time. The neighboring figure shows the selection of the different post blocks. You see the beginning (1) and the end (2) of the poly-line as well as the intermediate post (3). The corner post (4) is a +90° corner, the corner post (5) is a -90° corner, corresponding to the UCS and the running direction of the poly-line. . For all other angles the corner rotating in positive direction (6) or the corner rotating in negative direction (7) is selected.
Page E.2 - 22
Structural Element Handrail The post has to be defined in WCS, the positive z-axis corresponds to the height of the handrail. At insertion on a staging post, the positive x-axis is always aligned towards the running direction of the previous poly-line segment (except for the initial post) – the origin (0, 0, 0) of the WCS corresponds to the later insertion point on the staging post. Indicate the code P in the parts properties of the actual post shape under „Note 2‟. If you are working with fillings, all connecting elements, which have to be connected with the fillings later, get the code C here. Define a block attribute with the name DP for initial and final post to be able to place these fillings correctly (at intermediate and corner post, you have two block attributes DP1 and DP2). The filling is created later in a way that its block attributes are laying exactly one above the other as counterparts.
Handlrails, Knee-High Guardrails and Kick Boards These are defined in the post blocks as well as they are in general connected to them. They are short shapes which have to be aligned parallel towards the x/yplane and which contain the code R in the parts properties under „Note 2‟. After insertion of the post blocks these marked parts are connected to common elements if possible. Enter the code R,NC if you don‟t want to combine them.
Fillings The special characteristic of fillings is the fact that the distance between the assigned posts is not known at definition. To avoid having to define an own block for each possible distance, the elements are adapted to the current dimension by means of the options Stretch/Upset and Move. In addition, filling elements which once were defined can be regularly multiplied by means of dynamic distribution. A twisted filler rod has e. g. to be modelled only once to arrange it in a grid of 100-110 mm in the handrail segments. The filling has to be defined in the WCS as well. The positive z-axis corresponds to the height of the handrail. At insertion, the positive x-axis is always aligned towards the running direction of the corresponding poly-line segment. The origin (0, 0, 0) of the WCS lies in the middle of the block.
Page E.2 - 23
Structural Element Handrail Define two block attributes DP1 and DP2 to be able to place the fillings correctly. The filling is created later in a way that its block attributes and those of the posts are laying exactly one above the other. If you want a dynamic distribution, all elements to be distributed get the code FB in the parts properties under „Note 2‟. Two other block attributes FBSTART and FBEND determine the nominal grid size including the gaps. Depending on the default settings for length adaptation, the actual grid size can however be bigger or smaller. You can limit the area in order to determine borders – for example the protection against falling through the bars. If you enter the value MIN=100 in the input field for the block attribute FBSTART and the value MAX=110 in the input field for the block attribute FBEND, the distance will always be between 100 and 110 mm. Additional Hints No user-defined blocks may contain any group structures. In the handrail function, you decide at a later moment which component parts automatically have to form groups, subgroups or assemblies. The codes entered in the parts properties of the block templates under „Note 2‟ will be removed after insertion. In the finished 3D-model, the data field can be used for the parts list as usual.
Page E.2 - 24
Structural Element Handrail
Example The following example shows the possibilities of handrail construction with userdefined blocks and dynamic distribution of filler rods.
Corner support 45° The different posts and the filling element are constructed in the block templates and the filling element only contains the principle. At generation along the polyline it will be adapted to the current segment length. As it is only a matter of corners of 90° and 45°, the whole construction can be saved in a template and be reproduced. The neighboring figure shows the block of the filling element in detail. Since both filler rods alternate, they are modelled together, too. An exact distribution in a 150 mm grid including length compensation at the beginning and at the end of the segment is desired. This is why you find two block attributes FBSTART and FBEND each on the right and left side of the bars (with the input demand MIN and MAX=150). The filler rods and spheres have the code FB and in the drill holes of the upper butt straps you will find the block attributes DP1 and DP2 for the adaptation to the posts. The posts also have such butt straps with the same attributes in the drill holes of the butt straps for fixation.
Page E.2 - 25
Structural Element Handrail In handrail function, it is specified that the filling element as well as the supports have to form their own groups. An assembly can be built out of two supports and a filling element in order to display the main dimensions of construction and installation as common drawing. The following drawing is an automatic 2D-production drawing of a filling segment. Here you see that the length compensation of the distribution was effected at the edges and that the desired grid is exactly kept.
The possible 2D-detailing of a whole assembly shows how the filling element is placed between the different posts.
Page E.2 - 26
Structural Element Handrail
Due to a free construction via user-defined blocks (which adapt themselves dynamically) and due to the forming of parent and subordinate groups, you get complex handrails including 2D-plans in no time at all. Finally,here an the overall view as horizontal projection with the most important dimensions of the complete handrail.
Page E.2 - 27
Structural Element Handrail
Page E.2 - 28
Structural Element Hangar Frame
E.3
Structural Element Hangar Frame
This function generates a hangar frame from two support members and two crossbars, which can be connected to one another in different ways. This requires that you click on the outer edge insertion point of the left and right vertical frame members. This is followed by a dialog where you can set the specifications while verifying your input directly and immediately on screen. The dimensions of the frame can be changed at a later time by modifying the (yellow) object frame using its grips.
Dimensions
Width
The width of the hangar frame across outer steel edge.
Ridge Width
Enter the roof ridge width into this field if you have selected an asymmetrical hangar frame.
Centre Height
Here you indicate the ridge height of the crossbars. Changing the value will affect the pitch of the roof.
Dynamic
If this field is checked, you can monitor the settings immediately on screen.
Symmetrical
If this field is checked, a symmetrical hangar frame is generated by applying the values specified for one side to the other side.
Draw Diagonal
If this field is checked, the hangar frame (object frame) is marked with two additional diagonals.
Box Frames
If this field is checked, a frame is generated only with a crossbeam. In this case, the specifications for the ridge height are unimportant.
Page E.3 - 1
Structural Element Hangar Frame
Left Eave Height Here, you indicate the left eaves height of the crossbars. Right Eave Height Here, you indicate the right eaves height of the crossbars. Top Side Base
Specify the distance of the supports from floor level (the pick points of the supports) required to add base plates.
Left Column Offset Here, you indicate the projection of the left support upper edge beyond the height of the eaves. Right Column Offset Here, you indicate the projection of the right support upper edge beyond the height of the eaves. Left Roof Angle Here, you indicate the roof pitch of the left crossbar. Changing the value will affect the ridge height of the roof. Right Roof Angle Here, you indicate the roof pitch of the right crossbar. Changing the value will affect the ridge height of the roof.
Page E.3 - 2
Structural Element Hangar Frame
Shapes This dialog tab is used to select the corresponding shapes for the left and right vertical frame members as well as the crossbars. If you have selected a symmetrical hangar frame, the values specified for the left side are applied to the right side.
Which Shape
Here, you can select the shape the settings have to be applied to. Please note that at „Symmetrical‟ setting, the right shapes cannot be set because the values of the left shapes are applied to them.
Shape Type
Here, you select the shape type (normal, special shapes, etc.)
Shape Class
Here, you select the shape class or catalogue.
Shape Size
Here, you select the shape size.
Alignment
Here, you select how the supports have to be inserted related to the frame.
Page E.3 - 3
Structural Element Hangar Frame
Left and Right Knee This dialog tab is used to select the connection type for joining the left crossbar with the left vertical frame member. The same dialog tab is opened for the right knee. If you selected ‚Symmetrical‟, the entries are locked there and the settings for the right knee are adopted from the left one.
Attachment
Determines the kind of connection between crossbar and support: Adapt - The crossbar is cut to the support. You can specify a distance in the neighboring field Distances. Angle Cut - The crossbar and the support are cut to have a mitred joint. You can specify a gap in the neighboring field. Haunch - The connection is designed as a frame haunch. You can select a haunch template in the neighboring field.
Free Plate
The connection is designed as a plate connection. You can select a template for the plate connection in the neighboring field. Use the option Turn to rotate an unsymmetrical plate.
Align As is
No connections are made.
Page E.3 - 4
Structural Element Hangar Frame
Apex
This dialog tab is used to select the connection type for joining crossbars at the ridge point. Attachment
Determines the kind of connection between crossbar and support: Angle Cut - The crossbar and the support are cut to have a mitred joint. You can specify a gap in the neighboring field. Free Plate - The connection is designed as a plate connection. You can select a template for the plate connection in the neighboring field. Use the option Turn to rotate an unsymmetrical plate. Align As is -No connections are made
Assignments As it is the case with each dialog creating component parts, here too, you have the possibility to carry out all assignments directly for each single shape. To do this, select the component part and then select the settings to be applied.
Page E.3 - 5
Structural Element Hangar Frame
Page E.3 - 6
Structural Element Truss Girder
E.4
Structural Element Truss Girder
This function generates a truss girder from the upper and lower cord as well as the diagonals and many existing intermediate studs. Upper and lower cords can also be generated from two side-by-side shapes. This requires that you click on the left and right outer edge of the truss girder, which then adds the truss to the current plane of the user coordinate system. This is followed by a dialog where you can set the specifications while verifying your input directly and immediately on screen. The dimensions of the binder can be changed at a later time by modifying the (yellow) object frame using its grips.
Dimensions
Type
Select the different variations of the framework (parallel or alternating diagonals with or without intermediate studs).
Layout
Select on which side the bracing has to be carried out.
Length
The complete length of the girder
Height
Height of the girder from bottom edge of lower cord up to intersection of upper edges of upper cords in the middle (top of roof ridge)
Roof Angle
Roof slope of upper cord.
Page E.4 - 1
Structural Element Truss Girder
Side Height
Height of the girder from bottom edge of lower cord up to upper edge of upper cord measured on the sides. This value remains constant, while the value in the height filed can change if you adjust the pitch of the roof and vice versa.
Outer Distance
The distance of the axis of any existing intermediary studs at the rim of the roof truss outer edge (represented with the object frame).
Inner Distance
The distance of the axis of any existing intermediary studs in the center of the roof truss centerline
Segment Dist.
The distance of the segments of the truss girder (spacing of the girder junctions with parallel diagonals)
Segment Numb. The number of truss girder segments Plate Width
The spacing of the shapes, if, for example, upper and lower cords are generated from two side-by-side (U-shaped) shapes.
Shapes
Shape Offset
Select for which shape the settings are valid.
Shape Type
Select the shape types to be used.
Shape Class
Enter the class or the catalogue.
Shape Size
Select the shape size.
Page E.4 - 2
Structural Element Truss Girder
Front/Back
If these fields are checked, the selected shapes are added to the corresponding side of the truss girder. For example, you can also generate a truss girder from two side-by side Ushaped shapes.
Distances
Top Chord
The distance of the upper cord at the rim from the outer edge of the roof truss (represented with the object frame).
Top Chord Inside
The distance of the upper cord in the center of the roof truss centerline
Bottom Chord
The distance of the lower cord at the rim from the outer edge of the roof truss (represented with the object frame).
Fit Shape Ends
If this field is checked, the diagonals at upper/lower cord are cut to fit.
Top Diagonal
The distance of the diagonal from upper cord, if, e.g., connective plates are to be inserted.
Bottom Diagonal The distance of the diagonal from lower cord, if, e.g., connective plates are to be inserted. Fit Shape Ends
If this field is checked, any existing intermediate studs at upper (vertical) or lower cord are cut to fit.
Top Vertical
The distance of any intermediate studs from upper cord if connective plates are to be inserted
Page E.4 - 3
Structural Element Truss Girder
Bottom Vertical
The distance of any intermediate studs from lower cord if connective plates are to be inserted
Assignments As it is the case with each dialog creating component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Page E.4 - 4
Structural Element Purlin Course
E.5
Structural Element Purlin Course
Command Name:
PS_Pfette
This function generates a purlin course within a specified plane. For this, you select the area to be filled by clicking on the left lower and the right upper corner. The purlins are then inserted into this area with their lower edge flush with the plane of the current user coordinate system. An additional application consists of the possibility to insert secondary beams (joists) within two main girders. For this purpose, you have to finish the input of area at the first point using ESC. Then, you are prompted to enter the first main girder, then the second one. The dimensions for the purlin course then are defined by the end points of the main girders. In addition, you have the possibility to connect them with each other by means of a template. This is followed by a dialog where you can set the specifications while verifying your input directly and immediately on screen. The spacing of the purlin course can be changed at a later time by modifying the (yellow) object frame using its grips. Diagonals are possible as well.
Page E.5 - 1
Structural Element Purlin Course
General
Angle
The purlins are rotated around this angle value, which means they are arranged in a diagonal fashion.
Height Offset
Here, you can move the purlin course in positive Z-direction by applying the indicated value.
Dynamic
If this field is checked, the modifications of the settings can be monitored immediately on screen.
Symmetrical
If this field is checked, modifications of the structural element will be carried out symmetrically by drawing the grips.
Draw Diagonal
If this field is checked, the area to be filled (object frame) is marked with two additional diagonals.
Cut at Edge
If this field is checked, the purlins at the edges of the area to be filled are cut flush. Values in the fields Left Projection and Right Projection are then not considered.
Page E.5 - 2
Structural Element Purlin Course
Dimensions
Fixed Grid
If the „Grid‟ field is checked, you can indicate in the neighboring input field the approximate distance of the purlins within the area between first and last purlin. The program divides the distances regularly according to this specification and the value is rounded up or down correspondingly. The actual distances then are displayed in the Effective Grid field.
Free Grid
If the „Grid‟ field is not checked, you can freely define the grid division within the area between the first and last purlin in the „Distances‟ list. You can vary the number and the distance, as you like.
Turn
The distances are used inverted.
Offset Bottom
The distance from the centerline of the lowest purlin to the outer edge of the selected area.
Offset Top
The distance from the centerline of the topmost purlin to the outer edge of the selected area.
Offsets Fixed
If one of these options is activated, the selected distances are also kept in the grid; otherwise they are centered.
Page E.5 - 3
Structural Element Purlin Course
Offset Left
Specify a purlin projection extending past the left outer edge of the selected area. In case of a diagonal edge, this value references the centerline of the purlin; negative values shorten the purlin towards the inside.
Offset Right
Specify a purlin projection extending past the right outer edge of the selected area. In case of a diagonal edge, this value references the centerline of the purlin; negative values shorten the purlin towards the inside.
Shapes
Selection Lists
Here, you can select the desired shape as usual; all shapes are available for selection.
Position
Indicates the insertion position of the girders related to the insertion axis.
Mirror
If this field is checked, the shape position is mirrored at the length axis to turn the web side e.g. at U-shapes.
Rotation
Specifies the rotation of the shapes around the insertion axis.
Alternatively, you can also use a joist girder instead of a standard shape (see structural element „Joist Girder‟) the template of which can be selected on an additional dialog tab.
Page E.5 - 4
Structural Element Purlin Course
Border Lines
Cut Lines
Cutting edges can be added subsequently to permit the creation of non-rectangular purlin courses as well. Click this button to add a cutting edge. Then, you are prompted for a borderline to be clicked or to be defined by 2 points. All purlins intersecting this edge are divided at the edge with the distance specified in the Cut Width input field. Click on this button to remove a selected cutting edge.
Poly-cut
Apart from cutting edges, it is also possible to add sections for light domes or similar things. The procedure is the same as for sections; the only difference is that you have to click on a polyline here. Click on this button to add another section.
Click on this button to remove a section.
Page E.5 - 5
Structural Element Purlin Course
Connections If you have selected alternative insertion on the base of two main girders, the following page will be displayed in addition:
Which Page
Here you select for which side the settings have to be valid. You can define both sides simultaneously or each single side individually.
No Connection
The parts are only inserted; no connection is created.
Cope
The girders are coped. You either select a previously defined template or the simplified specifications are valid.
Connection
If you want one of the following connections, select the previously defined template.
Assignments As it is the case with each dialog creating component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Page E.5 - 6
Structural Element Ladder
E.6
Structural Element Ladder
This function is used to create a ladder including its fastening at the wall. In addition, you can add a safety cage to the ladder. To do this, just click the left and right insertion point of the ladder and then the height point (to determine the length) or any other point you like, if the length has to be determined later. Then a dialog opens where you can set the specifications by direct monitor control. The ladder dimensions can be changed at a later time by modifying the (yellow) object frame using its grips.
Dimensions
Width
The width of the ladder as clear dimension between the uprights.
Height
The height of the ladder without possible projection as help for climbing out.
Riser
The desired distance between the rungs. The program divides the distances between first and last rung regularly according to this specification and the value is rounded up or down correspondingly.
Actual Riser
The actual resulting distance between the rungs is displayed.
Distance to Floor The distance between the upper edge of the first rung and the ground area of the ladder.
Page E.6 - 1
Structural Element Ladder
Top Distance
The distance between the upper edge of the last rung and the climbing out surface of the ladder.
Offset
The height of the help for climbing out related to the climbing out surface of the ladder (axis measure).
Stringer
The depth of the help for climbing out (axis measure)
Sharp Bend
The front jump-in of the help for climbing out (axis measure), if it has to be created with a bend.
Dynamic
If this field is checked, you can monitor the modification of settings immediately on screen.
Diagonal
If this field is checked, a diagonal of the actual structural element is drawn in the ladder to support an easier selection.
Fit… Rungs If this field is checked, the rungs are adapted to the uprights. Round tubes are e.g. cut with each other.
Page E.6 - 2
Structural Element Ladder
Shapes
Selection Lists
Select the shapes of the ladder uprights and rungs as usual. All shapes are available for selection.
0 Degree
You can rotate the shapes around their insertion axis here. The upright shape can be rotated by increments of 90° whereas the rungs can be rotated by increments of 45°.
Mirror
If this field is checked, the corresponding shape will be mirrored before insertion.
Page E.6 - 3
Structural Element Ladder
Wall Mounting You can add a wall fastening to the ladder here. The wall shape is, however, only created if the Wall Shape field has been checked before. In the Selection Lists, you can select the required shape as usual. All shapes are available for selection.
0 Degree
You can rotate the wall shape around its insertion axis here by checking the required angle.
Mirror
If this field is checked, the wall shape will be mirrored before insertion.
Position
Select the insertion position of the wall shape. Inner Edge –The wall shape is inserted at the inner edge of the upright and shows to the inside. Centrally –The wall shape is inserted in axis position on the height of upright axis. Outer Edge – The wall shape is inserted at the outer edge of the upright and shows to the outside.
Wall Distance
The distance between upright axes and wall surface where the ladder has to be mounted.
Distance to Floor The distance between the axis of the first wall shape and the ground area of the ladder. Distance
Page E.6 - 4
The desired distance of the wall shapes. The program divides the distances between the first and last wall shape regularly according to this specification and the values are rounded up or down correspondingly.
Structural Element Ladder
Top Distance
The distance between the axis of the last wall shape and the climbing out area of the ladder.
Safety Cage You can add a safety cage to the ladder here. The safety cage is only created if the Safety Cage field has been checked before. In the Selection Lists, you can select the required shape as usual. All shapes are available for selection.
0 Degree
Here, you can rotate the shape around its insertion axis.
Mirror
If this field is checked, the shape will be mirrored before insertion.
Position
Here you can select the insertion position of the wall shape. Inner Edge –The wall shape is inserted at the inner edge of the upright and shows to the inside. Centrally –The wall shape is inserted in axis position on the height of upright axis. Outer Edge – The wall shape is inserted at the outer edge of the upright and shows to the outside.
Radius
Enter the radius of cage stiffeners.
No. of Rungs
Specify how many longitudinal rungs the cage has to consist of. The bars will be divided regularly on the resulting semicircle.
Page E.6 - 5
Structural Element Ladder
Lower Radius
Enter a bigger radius if you want to have a conical cage.
Lower Distance Specify the distance of the lowest shackle to the next shackle. If you don‟t want to have a conical cage, you can keep the value 0 in this field and in the lower radius field. Depth etc.
Please refer to the below figure for the meaning of the other distances.
Distance to Floor Distance from the floor to the first shackle. Distance
The desired distance of the stiffeners (rings) of the safety cage. The program divides the distances between the first and last ring regularly according to this specification and the values are rounded up or down correspondingly.
Top Distance
The distance from the top to the first shackle
Page E.6 - 6
Structural Element Ladder
Lateral Climbing Out It is possible to define a lateral climbing out for the safety cage of the ladder.
Lateral Climbing Out You can provide a lateral climbing out for an existing safety cage. Position
The lateral climbing out has to lead to the left, to the right or to both sides.
Upper Distance The distance of the lateral climbing out to the upper upright of the ladder. Lower Distance The distance of the lateral climbing out to the upper edge of the safety cage. Extended Distance The offset of the lateral climbing out in climbing out direction beyond the dimensions of the safety cage.
Assignments As it is the case with each dialog creating component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Page E.6 - 7
Structural Element Ladder
Page E.6 - 8
Structural Element Joist
E.7
Structural Element Joist
This function serves for creation of a joist as it is often used in the USA. This joist is a pre-fabricated element in lightweight construction that is offered in different executions and lengths.
Dimensions
Length
the length of the joist
Height
the height of the joist
Inner Distance
the distance of shapes in transverse direction
Calculate Spacing The inner distance is calculated for the vertical and diagonal components based on the selected shapes. Roof Angle
The joist is built as a saddle roof.
Continuous...
The joist is built as desk roof.
Seat Height
defines the height of the lateral seats.
Seat Length
Here, you can define the length of the seats for both sides separately.
Lower Retreat
Here, you can indicate the lower retreat referring to the upper length for both sides separately.
Upper Shape Offset Here, you can indicate the upper shape offset above the selected length for both sides separately.
Page E.6 - 1
Structural Element Joist
Lower Shape Offset Here, you can indicate the lower shape offset for both sides separately. Dynamic
The joist rebuilds the shapes immediately after modifications.
2D Display
The joist is depicted as 2D-display. No 3D-shapes are created or displayed. The display depends on the view direction.
Layout
Layout
Here, you can select the kind of layout you want to have. 5 different types are available for selection: Symmetrical – The layout consists of upper and lower girder as well as of vertical and diagonal shapes. Single Lacing – The layout consists of upper and ceiling joists as well as of single bent intermediate beams. Double Lacing - The layout consists of upper and ceiling joists as well as of double bent intermediate beams. Tension Rods Type1 - The layout consists of upper and ceiling joists as well as of tension rods. Tension Rods Type2 - The layout consists of upper and ceiling joists as well as of tension rods.
Segment Count Here, you specify the number of individual segments. At option 1, this number has to be divisible by 2, at option 2 and 3, not to be divisible by 2. At the remaining options, you can enter any number. Segment Distance The distance from one segment to the other
Page E.7 - 2
Structural Element Joist
Distance A
The distance from the outside to the first minimum.
Distance B
The distance from the last minimum to the last maximum.
Distance C
The distance from the next to last maximum to the next to last minimum.
Distance D
The distance from the next to last minimum to the inner maximum.
Distance E
The distance of the inner segments.
Rounding Radius This indicates the rounding radius at the two lacing types.
Shapes
Shape Offset
Here, you select for which rod area the corresponding settings have to be valid.
Shape Type
Here, you select which shape type is to be used. Depending on the offset you selected only certain shape types are available.
Shape Class
Here, you select which shape class is to be used. Depending on the offset you selected only certain shape classes are available.
Shape Size
Here, you select the desired shape size.
Page E.6 - 3
Structural Element Joist
Layout
Here, you select which layout you want to have. Since normally the inner structure of the joist is not interesting, you can switch off this function. If you want to have it displayed nevertheless, but you don‟t want to have displayed the individual objects, you can set the layout to Simple. In this mode, the shapes are displayed as part of the structural element. If you want to have displayed all details and you want to change some shapes, you can select Complete View. The settings don‟t have any influence on the display of the seats.
Top Seats
Here, you specify the display and the design of the top seats. You can choose between shapes, plates and seat sockets which can be determined by means of parameters. Due to the great number of different designs, it is, however, possible as well to select the top seat as individual user block and to have designed it here. Layout
Select the design of the top seat here.
Seat Length
Indicates the length of the shape, plate or socket.
Seat Width
Indicates the width of the metal sheet or socket.
Seat Thick
Indicates the thickness of the metal sheet or socket
Insert Holes
Select this option if you want to insert a hole field into the seat.
At Length Direction Indicates the design of the hole field at length direction.
Page E.7 - 4
Structural Element Joist
In Cross Direction
Indicates the design of the hole field in cross direction.
Diameter
Indicates the hole diameter.
Workloose
Indicates the additional value to the hole diameter.
Hole Distance
Indicates the distance of the insertion point of the hole from the corresponding definition or endpoint.
Down Seat Here, you specify the display and the design of the down seats. For more detailed information, please refer to the description of top seats.
Page E.6 - 5
Structural Element Joist
User-defined Blocks You can design both seats and top and bottom chords as user-defined blocks. In this case, no top or bottom chord shapes are generated, but your individual blocks are inserted and resolved at the insertion position.
Upper Chords as Blocks You activate the insertion of upper chords as userdefined blocks. Connect Shapes If this option has been activated, the corresponding shapes – if existing – are connected with each other. Left/Right
Here, you select the blocks for left and right side separately.
The same options are available for the selection of user-defined blocks for the lower chord.
Page E.7 - 6
Structural Element Joist
Seat Blocks
If you have selected the top and down seats as blocks, you can select the corresponding blocks here.
Page E.6 - 7
Structural Element Joist
Data Here, you enter the general parts list data of the joist. They will be displayed in the parts list.
Name
joist name
Item No.
the item number of the joist
Note1,2
the two note fields for comments.
Pos No.
the position number of the joist.
Weight
the weight of the joist.
Line Type
line type of the system lines.
In Partlist
the joist is taken over into the parts list.
Page E.7 - 8
Structural Element Joist
Database
When a valid database has been entered in the options, you can choose a previously defined joist from the available values.
Options
Allow Shapes in Partlist If this option is activated, the corresponding partlist flag is set at inserted shapes.
Page E.6 - 9
Structural Element Joist
Allow Shapes in DetailCenter If this option is activated, the corresponding detailing flag is set at inserted shapes. Display Shapes in Overviews If this option is activated, the inserted shapes are displayed in 2D-overviews. Block path
Indicates the path where the available user-defined blocks have been stored.
Database
Indicates the database which serves for the selection of previously defined values.
Assignments As it is the case with each dialog creating component parts, here too it is possible to carry out all assignments directly for each single shape. Select the component part and then select the settings.
Page E.7 - 10
ProSteel Properties Dialogs
E.8
ProSteel Properties Dialogs
It frequently occurs that the properties of existing component parts have to be modified. There are several different ways to select the properties function. There ProSteel puts in a context sensitive way all available parameters at disposal for modification. The most frequent way of selection is to highlight the part(s) and then to open the context menu by means of the right mouse button. There, you find the option ProSteel properties. Another possibility is to use the function PS_PROP_CHECK. In addition, the COM-module „Double-Click‟ is available as well. You can call the PS-properties by double-clicking the parts. No matter which way you choose, ProSteel analyses which parts were selected and only provides the properties valid for these parts for modification. Make sure that the desired type of component part has been selected first if you want to modify several parts simultaneously. This means, if you want to modify all plates of a model, you have to make sure that the first selected object is a plate. All other selected elements are filtered accordingly. In this case, you can e.g. select a plate and then the complete model, and then all component parts that are not plates are automatically filtered out. The dialog windows can be divided into three different categories. 1. - Dialogs being specific for a component part type. 2. - Dialogs offering processing actions. 3. - Dialogs being generally valid for all component parts. The first group depends on the selected type. The second group is not displayed if several parts have been selected and depends on the processing actions included. The third group is generally displayed for all elements.
Page E.7 - 1
ProSteel Properties Dialogs
E.8.1 Shapes Layout On this dialog tab, you can modify the display of shapes individually. At insertion, the shapes obtain the settings that were made and can be overwritten individually.
Layout
Here, you specify how the shape has to be depicted.
Holes
Here, you specify the depiction of drill holes.
Only Outer Cont. Only the first outer contour is displayed. At tubes, e.g., the inner cylinder will not be displayed. Modeller
The component part is displayed by means of the facetmodeler. Normally, the software independently decides when the modeler has to be used for depiction. However, you can explicitly define it using this option. If the modeler has to be used, you cannot switch it off.
Acis
The ACIS-modeler is used for depiction instead of the facetmodeler. ACIS is much slower but more precise than the facet-modeler. Please note that it is not possible to mix ACISand facet-modeller volume models.
2D Display
A calculated 2D-depiction depending on the current view direction is displayed instead of standard 3D-depiction.
Center Line
The centerline of the shape is displayed.
Page E.8 - 2
ProSteel Properties Dialogs
COG Line
The gravity line is displayed.
Pitch Lines
If crack lines have been defined for this shape, they are displayed.
Part Label
The name of the component part is displayed dynamically at the part. The position depends on the angle of vision. The settings are made in the global settings.
Short name
If a short position has been filed in the database; it will be used instead of the complete name.
ECS Axes
The Entity Coordinate System is displayed. It mainly serves for verifying purposes.
Transparency
The part is displayed transparent at shading.
Direction marker If the component part has got a benchmark during detailing, this will be displayed. 2D-Section
Automatic 2D cut information is displayed.
Page E.7 - 3
ProSteel Properties Dialogs
Shape Type Here, you can modify the shape type of one or several shapes.
Shape Type
Select the type of the shape.
Resolution
Select the desired resolution of the shape.
Shape Class
Select the class or library of the shape.
Shape Size
Select the size of the shape. The data base information about this shape is displayed.
Treat As Singl… If you have selected a combi shape or a weld shape, you can specify whether the individual components have to be treated as single parts. The same is valid if the shape has not yet been exploded.
Page E.8 - 4
ProSteel Properties Dialogs
Positions Use this dialog tab to specify the insertion or reference axis. You can select the desired points in the preview.
Select Line
Here, you specify whether the insertion point or the reference axis has to be set. As long as a reference axis doesn‟t exist, this option cannot be accessed.
X-Offset
X value of insertion
Y-Offset
Y value of insertion
Rotation Angle
Input value for rotation
+Phi
The shape is rotated around the current insertion axis by the input value.
-Phi
The shape is rotated around the current insertion axis by the input value.
+90
The shape is rotated around the current insertion axis by +90 degrees.
-90
The shape is rotated around the current insertion axis by -90 degrees.
Page E.7 - 5
ProSteel Properties Dialogs
The insertion points are rotated and thus mirrored at the Yaxis.
A reference axis is added to the shape.
A reference axis is subtracted from the shape.
At Max. 2 reference points are added to the shape.
The reference points are subtracted from the shape.
Data This dialog tab is used for management of non-graphical properties.
Name
The name of the shape for parts list and output.
Material
The material of the shape for parts list and output.
Note1
The blank note 1 field.
Note2
The blank note 2 field
Pos No.
The position number of the shape
Page E.8 - 6
ProSteel Properties Dialogs
Shipping No.
Shipping number can be used alternatively or additionally to the position number
Orig. Pos No
Fixed stored position number
Item
Item number of the part
Count
The number of parts for this element. Normally this is always 1.
Total
This is the number of parts of this position number in the model. This value is only correct after positioning.
Modified
It is displayed whether this shape has been modified since last detailing. After scanning the parts with the DetailCenter, this field is automatically deleted and the modification information is managed in the DetailCenter.
Adopt
The shape is adopted into the parts list.
No Detail.
The shape is not displayed in the DetailCenter.
Values This dialog tab is used for management of non-graphical properties.
Length
Shape length; if this value is modified, the length is modified from the shape end.
Width
The width of the shape
Height
The height of the shape
Page E.7 - 7
ProSteel Properties Dialogs
Weight
The weight of the shape
Vol Weight
The weight is calculated via the volume modeler and not on the base of the length and the weight in meters.
Addition
Length addition to the calculated length
Number
The number of parts for this element. Normally this is always 1.
Total
This is the number of parts of this position number in the model. This value is only correct after counting.
Page E.8 - 8
ProSteel Properties Dialogs
Conical Depending on the selected shape, this dialog tab can look different. This is the dialog tab of a standard shape.
Slope
Change in height in mm per meter length
Show Cut
The diagonal dividing cut is displayed.
For weld shapes, the slope can also be defined via the climb. It is, however, also possible to indicate starting and end height. In addition, some tools are available to manipulate the cross-section or to realize a cross-section that changes several times.
Page E.7 - 9
ProSteel Properties Dialogs
Slope
Change in height in mm per meter length
Start Height
Height at the beginning of the shape; only available if no other manipulation was made.
End Height
Height at the end of the shape, only available if no other manipulation was made. Use this button to define the height of a weld shape at any point or along a line. If necessary, a new polygon point will be created. The side situated next to the picked point will be modified. Then, another dialog opens where you can indicate the height. The height up to then is displayed, and you can enter the desired new height. A new edge is inserted into the web plate at the picked point. The height remains unchanged. The edge situated next is deleted from the web plate.
This button permits modifying the edges of the web plate using the grips. All other grips of this shape are deactivated at that moment. This button permits the management of the projections of upper and bottom flange at the starting and end point. The following dialog appears.
Page E.8 - 10
ProSteel Properties Dialogs
Bottom Fl. Start The projection of the bottom flange at the starting point of the shape is indicated. Bottom Fl. End
The projection of the bottom flange at the end point of the shape is indicated.
Top Flange.Start
The projection of the upper flange at the starting point of the shape is indicated.
Top Flange. End The projection of the upper flange at the end point of the shape is indicated. This button permits the management of the flange thickness table. Using this table, you can assign different widths and thicknesses to individual segments of the shape. The following dialog appears:
Page E.7 - 11
ProSteel Properties Dialogs
This button permits to click on a flange edge to add it to the table. The preset values are taken over first, which however, can be directly modified in the table. The current table entry is deleted using this button. The thickness is reset.
Upper and bottom flange are considered separately. The indication of the flange refers to the number of flanges from the starting point per side. It is recommended to edit the thicknesses after having determined the bend points. A modification of the form by insertion or deletion of points modifies the table as well because the number of flanges is modified.
Page E.8 - 12
ProSteel Properties Dialogs
Static View If the static view has been activated in the global settings, the static values are displayed in the dialog. For a more detailed description of the options please refer to the chapter Static View.
Bend If the selected shape is an arc shape, this dialog tab is additionally displayed.
Radius
The radius of the arc shape up to the center line
Starting Angle
The angle between the x-axis of the ECS and the starting point of the shape in degree
End Angle
The angle between the x-axis of the ECS and the end point of the shape in degree.
Rotation
Rotation around the insertion axis in degree
Page E.7 - 13
ProSteel Properties Dialogs
Shortening If the shape is displayed in 2D-mode, additional shortenings may have been inserted into the shape. You can see these shortenings on this dialog tab.
The selected shortening is deleted.
Page E.8 - 14
ProSteel Properties Dialogs
E.8.2 Plates
Layout Use this dialog tab to modify the depiction of plates individually. At insertion, the plates obtain the settings that were made and thus can be overwritten individually.
Layout
Here, you specify how the plate has to be depicted.
Holes
Here, you specify the depiction of drill holes.
Modeler
The component part is displayed by means of the facetmodeler. Normally, the software independently decides when the modeler has to be used for depiction. However, you can explicitly define it using this option. If the modeler has to be used, you cannot switch it off.
Acis
The ACIS-modeler is used for depiction instead of the facetmodeler. ACIS is much slower but exacter than the facetmodeler. Please note that it is not possible to mix ACIS- and facet-modeler volume models.
2D Display
A calculated 2D-depiction depending on the current view direction is displayed instead of standard 3D-depiction.
Center Line
The centerline of the plate is displayed
Element Name
The name of the component part is displayed dynamically at the part. The position depends on the angle of vision. The settings are made in the global settings.
Page E.7 - 15
ProSteel Properties Dialogs
Short Position
If a short position has been filed in the database; it will be used instead of the complete name.
ECS System
The Entity Coordinate System is displayed. It mainly serves for verifying purposes.
Transparency
The part is displayed transparent at shading.
Grid
A plate grid is displayed on the upper side of the plate. This grid represents a gridiron or similar things.
Position
Use this dialog tab to specify the plate position related to the insertion point and to the insertion plane. Length
Plate length; only available if the plate is in rectangular mode.
Width
Plate width; only available if the plate is in rectangular mode.
Thickness
Plate thickness
Height Offset
Position of the insertion plane above the ECS plane
Insert Edge
The edge at which the plate is inserted related to the ECSplane.
X-Offset
x-offset related to the insertion point.
Y-Offset
y-offset related to the insertion point.
Rectangular
The rectangular basic form of the plate is kept, and you cannot change it into another form using the grips. If this option is deactivated, you cannot reset it.
Symbol Direction Size Specifies the size of the symbol direction on plate grids.
Page E.8 - 16
ProSteel Properties Dialogs
At most 2 reference points are added to the plate.
The reference points are subtracted from the plate.
Data This dialog tab is used for management of non-graphical properties.
Name
The name of the plate for parts list and output.
Name
The final name built according to the settings with dimensions.
Material
The material of the plate for parts list and output.
Note1
The blank note 1 field
Note2
The blank note 2 field
Pos No
The position number of the plate
Ship.No.
Shipping number; can be used alternatively or additionally to the position number
Orig. Pos No
Fixed position number
Item
Item number of the plate
Page E.7 - 17
ProSteel Properties Dialogs
Modified
It is displayed whether this plate has been modified since last detailing.
Adopt
The plate is adopted into the parts list.
No Detail.
The plate is not displayed in the DetailCenter.
Man. Alignment The dimensions of the plate are determined according to a selected direction. Man. Surface
The direction of the surface symbol was determined manually.
Values This dialog tab is used for management of non-graphical properties.
Length
The length of the plate
Width
The width of the plate
Thickness
The thickness of the plate
Weight
the weight of the plate
Vol Weight
The weight is calculated via the volume modeler and not on the base of the dimensions.
Number
The number of parts for this element. Normally this is always 1.
Total
This is the number of parts of this position number in the model. This value is only correct after positioning.
Page E.8 - 18
ProSteel Properties Dialogs
Fixed Form
The plate can only be modified by means of manipulations such as cuts or Boolean operations.
Page E.7 - 19
ProSteel Properties Dialogs
E.8.3 Bolts
Layout Use this dialog tab to modify the depiction of bolts individually. At insertion, the bolts obtain the settings that were made and the selected bolt style; thus they can be overwritten individually.
Layout
Here, you specify how the bolt has to be depicted.
Coating
Here, you specify the coating.
Modeller
The component part is displayed by means of the facetmodeler. Normally, the software independently decides when the modeler has to be used for depiction. However, you can explicitly define it using this option. If the modeler has to be used, you cannot switch it off.
Acis
The ACIS-modeler is used for depiction instead of the facetmodeler. ACIS is much slower but exacter than the facetmodeler. Please note that it is not possible to mix ACIS- and facet-modeler volume models.
2D Bolt
The bolt is displayed in a calculated 2D-depiction.
Page E.8 - 20
ProSteel Properties Dialogs
Mounting Space The assembly room is displayed as well. It mainly serves for verifying whether an assembly is possible. Individually specifies whether the mounting space has to be read out of the bolt style. 2D
The bolt is depicted as 2D-symbol.
Transparency
The part is displayed transparent at shading.
Countersunk
The bolt is displayed as countersunk bolt.
Hexagon Socket The bolt is executed as hexagon socket. Mounting Bolt
The bolt is checked as assembly bolt, in contrast to workshop bolts. This has an influence on the assembly parts list.
Bolt
The bolt is depicted.
Washer
The lower washer is depicted.
Nut
The nut is depicted
Lock Nut
The safety nut is depicted
Tapered Washer The tapered washers are activated, but not displayed. They serve as basis for the parts list entries. You can choose between U- and I-form washers. 2
nd
Washer
The second washer is depicted.
2
nd
Tapered…
The second tapered washer is depicted. The insertion direction of the bolt is turned.
Page E.7 - 21
ProSteel Properties Dialogs
Data
Name
The name of the bolt for parts list and output.
Material
The material of the bolt for parts list and output.
Style
The assigned bolt style
Note1
The blank note 1 field
Note2
The blank note 2 field
Pos No
The position number of the bolt
Ship.No.
Shipping number; can be used alternatively or additionally to the position number
Item
The item number of the shape
Number
The number of bolts for this element. Normally this is always 1.
Total
This is the number of parts of this position number in the model. This value is only correct after positioning.
Page E.8 - 22
ProSteel Properties Dialogs
Values
Length
Bolt length
Dia
Bolt diameter
Grip Length
The calculated clamping length of the bolt
Weight
The weight of the bolt
Addition
Length addition to the bolt
Modified
It is displayed whether this bolt has been modified since last detailing.
Adopt
The bolt is adopted into the parts list.
Bolt
The bolt is listed in the parts list as single data record, if desired.
Washer
The washer is listed in the parts list as single data record, if desired.
Nut
The nut is listed in the parts list as single data record, if desired.
Safety Nut
The safety nut is listed in the parts list as single data record, if desired.
Tapered Washer The tapered washer is listed in the parts list as single data record, if desired.
Page E.7 - 23
ProSteel Properties Dialogs
2
nd
Washer
The second washer is listed in the parts list as single data record, if desired.
2
nd
Tapered…
The second tapered washer is listed in the parts list as single data record, if desired.
Pre-Tension
Page E.8 - 24
The pre-tension of the bolt in percent.
ProSteel Properties Dialogs
E.8.4 Volume Solids / Basic Primitives
Layout Please refer to the section about the shapes for the individual descriptions of these setting options.
Data The parts list data of these component parts are identical with the parts described until now. Please refer to the above chapters for the description of the different fields.
Page E.7 - 25
ProSteel Properties Dialogs
Values The parts list values of these component parts are identical with the parts described until now. Please refer to the above chapters for the description of the different fields.
Page E.8 - 26
ProSteel Properties Dialogs
E.8.5 Special Parts Special parts are drawing elements with special properties added by ProSteel. You can edit these properties using this dialog tab for their being correctly displayed in the parts list.
In Bolt List
The special part at parts list output has to be adopted into the bolt list. You can differ between mounting bolt and workshop bolt.
PPS Z-Part
The special part has to generate a Z-entry at PPS-data generation.
Page E.7 - 27
ProSteel Properties Dialogs
E.8.6 Assemblies Assemblies are separate objects in ProSteel. They serve for extending the group structures. In contrast to groups and subgroups, they are not connected with a main part and carry their group information themselves. The data are managed as follows.
Layout
Kind of depiction of an assembly object; this may be no depiction, UCS-symbol, sphere or wrapping box.
Sketch Size
Indicates the size of the assembly symbol in the current drawing.
2D
Indicates whether the assembly object is switched over to 2Dmode or not. This controls the depiction of the whole assembly structure in the drawing.
Page E.8 - 28
ProSteel Properties Dialogs All other properties are subdivided into the tabs data and values as it is the case with all other component parts.
Page E.7 - 29
ProSteel Properties Dialogs
E.8.7 Work Frames / Views In the case of work frame objects, you can modify the properties of the complete object according to the options described in the manual. Please refer to the corresponding pages of this manual.
E.8.8 Structural Elements In the case of structural elements, you can modify the properties of the complete object according to the options described in the manual. Please refer to the corresponding pages.
E.8.9 Roof/Wall-Objects Please refer to the corresponding chapter of this manual where the modification of roof/wall-objects is described.
E.8.10
Position Flags, Elevations, Weld Marks,..
The properties of label objects such as position flags, elevations, weld marks, manual dimensioning objects and benchmark can also be set specifically for each component part.
E.8.11
Drawing Parts Lists
Please refer to the corresponding chapters of this manual where the setting of a drawing parts list and of a drawing containment list is described.
Page E.8 - 30
ProSteel Properties Dialogs
E.8.12
3D Modifications
The processing actions included in the ProSteel-elements can mostly be modified or deleted on the property pages described in the following. Please refer to the following chapters to find out how it works.
Drill Holes/Bolted Joints Use this dialog tab to modify or delete the drill holes or bolted joints included in the part. Please refer to the chapter Drill Holes/Bolted Joints in this manual for the description of the different parameters.
Page E.7 - 31
ProSteel Properties Dialogs
Boolean Operations Use this dialog tab to modify or delete the Boolean operations included in the part.
Length
Indicates the length of the discharge-solid.
Width
Indicates the width of the discharge-solid.
Height
Indicates the height of the discharge-solid.
Operation
Indicates the kind of Boolean operation an.
Type
Indicates the type of the discharge-solid.
Modeller
Indicates the modeller-type of the discharge-solid. It is important here to keep the modeller on „Variable‟ to be able to switch over the modeling of the complete component part correctly. Click on this button to create the discharge-solid as new element. Click on this button to remove the Boolean operation or all processings.
Page E.8 - 32
ProSteel Properties Dialogs
Facet Use this option to edit the chamfers included in the part. The dialog tab is analogous to the Plate Editor. Please refer to this chapter for the description of the different processing parameters.
Click on this button to delete the chamfer or all chamfers.
Page E.7 - 33
ProSteel Properties Dialogs
E.8.13
Flat Cuts
Use this dialog tab to process and delete flat cuts (diagonal cuts) included in the component part.
Phi Dx
Indicates the rotation angle around the x-axis
Phi Dy
Indicates the rotation angle around the y-axis
Center of Rota… Indicates the rotation point Click on this button to delete the cut or all cuts.
Page E.8 - 34
ProSteel Properties Dialogs
E.8.14
Poly-Cuts
On this dialog tab, all poly-cuts included in the part will be displayed.
Length
Modify the length of the poly-cut using this button.
Offset
Modify the offset of the poly-cut using this button. Click on this button to delete the poly-cut or all poly-cuts.
Page E.7 - 35
ProSteel Properties Dialogs
E.8.15
Edge Processing
Here, you can modify the edge properties of plates. Please refer to the corresponding chapter in this manual for the settings.
Click on this button to delete the processing of an edge or all processings of an edge.
Page E.8 - 36
ProSteel Properties Dialogs
E.8.16
Notches (Outlets)
Use this dialog tab to modify the properties of the currently selected notch.
Length
Indicates the length of the notch.
Width
Indicates the width of the notch.
Depth
Indicates the height of the notch.
Insertion Position Indicates the insertion position of the notch. Click on this button to delete the notch or all notches.
Page E.7 - 37
ProSteel Properties Dialogs
E.8.17
Common Properties
In this section, you will find a description of the general parts properties. The properties described here are not always completely available, but are only displayed if required.
Group On this dialog tab the data of the group/subgroup/assembly are listed to which the component part in question belongs.
Page E.8 - 38
ProSteel Properties Dialogs
Use these two buttons to switch through the group hierarchy of the selected component part.
Page E.7 - 39
ProSteel Properties Dialogs
Logical Links On this dialog tab, the logical links of the part are listed.
Active
Indicates whether the link is activated. You may also deactivate the link here.
Index
Internal code of the link
Link Type
The action is described by which the link has been created.
Modification
Indicates the modifications of the part caused by this link.
Name
Is a name which is used to make this connection visible in the DetailCenter later. This entry can be written by automatic positioning.
Ident
Is a designation which is used to make this connection visible in the DetailCenter later. This entry can be written by automatic positioning. The entries “Ident” and “Name” only exist when the option “Logical Links/Extended Input” has been activated in the global settings.
Use this button to process the link directly.
Page E.8 - 40
ProSteel Properties Dialogs
Use this button to delete the link or all links directly. Click on this button to edit the static connection data of the connection. This entry only exists when the option “Logical Links/Extended Input” has been activated in the global settings.
Page E.7 - 41
ProSteel Properties Dialogs
Assignments Use this dialog tab to make the assignments to the drawing object. These assignments may differ from one part to the other. They are however described in the corresponding chapters.
Detail Style
Here, you can assign a detailing style to the part.
Display
Here, you can assign a display class to the part.
Area Class
Here, you can assign the part to an area class that you created before.
Parts Family
Here, you can assign the part to a part family (e. g. support or girder).
Process-Status
Here, you can see the current process-status of the component part.
Page E.8 - 42
ProSteel Command Reference
E.9
ProSteel Command Reference
Here, you will find a short survey how you can call the ProSteel functions documented in the manual using AutoCAD. Function
Chapter
Command Name
C.16
PS_CUT_OUT
B.11
PS_MODIFY
Add 3D-Volume
B.11.7
PS_ADD
Add Shape Segment
B.8.5
PS_ADD_SECTION
Area Classes
B.5.4
PS_AREA_CLASS
Automatic 2D-Cut
C.18
PS_ADD_2DCUT
Benchmark
C.6
PS_BENCHMARK
Bend Edged Plates
B.9.4
PS_PLATE
BlockCenter
D.2
PS_BLOCKCENTER
Bolts
B.14
PS_BOLT
Bracings
B.24
PS_VERBAND
Bracings, dynamic
B.23
PS_BRACING
Butt-Joint Connection
B.20
PS_LASCHE
Calculate Center of Gravity
D.5.2
PS_WEIGHTCENTER
Chamfer Plate Edge
B.12.2
PS_CHAMFER
Clean AutoCAD-Drawing
D.5.6
PS_CLEAN_PROXY
Clean AutoCAD-Drawing (Batch)
D.5.6
PS_BATCH_CLEAN_DWG
Collision Check
D.5.1
PS_COLLISION
Connection-Editor
B.26
PS_EDIT_CONNECTIONS
Construction Lines
B.2.1
PS_CONST
2D 2D-Cut Out 3D 3D-Modifications A
B
C
Page E.7 - 1
ProSteel Command Reference Containlist
B.32
PS_DWG_CONTAINLIST
Convert ADT-Shapes
D.5.7
PS_CONVERT_ADTSHAPES
Cranked 2D-Cut
C.5
PS_CRANKEDVIEW
Create ACIS-Solid
D.5.5
PS_CREATE_ACIS
Create ACIS-Solid (Batch)
D.5.5
PS_BATCH_CREATE_ACIS
Create 3D-Cone
B.10
PS_SOLID_CONE
Create 3D-Conic Pipe
B.10
PS_SOLID_CONICPIPE
Create 3D-Cross-section transition
B.10
PS_SOLID_RECT2CIRCLE
Create 3D-Cuboid
B.10
PS_SOLID_BOX
Create 3D-Cylinder
B.10
PS_SOLID_CYLINDER
Create 3D-Extrusion Solid
B.10
PS_SOLID_EXTRUDE
Create 3D-Rotation Solid
B.10
PS_SOLID_ROTATE
Create 3D-Solid
B.10
PS_SOLID_HULL
Create 3D-Sphere
B.10
PS_SOLID_SPHERE
Create 3D-Torus
B.10
PS_SOLID_TORUS
Cut Plane
B.3.6
PS_CUTPLANE
Data Export
D.7.5
PS_EXPORT
Data Import
D.7.4
PS_IMPORT
DetailCenter
C.1
PS_DETCENTER
Dimensioning Points
C.7
PS_INSERT_MANDIM
Dispatch Bolts and Blocks
D.4
PS_DISPATCH
Display Pickhelpers
C.1.6
PS_PICKHELPER
Display Program Version
A.1.2
PS_VERSION
Drawing Information
B.29
PS_DWG_INFO
Drawing Frame
C.10
PS_FORMAT
Drawing Partslist
B.31
PS_DWG_PARTLIST
Drill and Bolt
B.13
PS_DRILL
DSTV NC-Interface
D.7.8
PS_NC_DATA
DSTV PPS-Interface
D.7.8
PS_PPS
D
Page E.7 - 2
ProSteel Command Reference DSTV Static-Interface
D.7.8
PS_STATIK
Edit Exchange Map
D.7.2
PS_EXCHANGE_MAP
Elevations
C.13
PS_KOTE
Endplates
B.16
PS_ENDPLATE
Face UCS
B.3.2
PS_FACE_UCS
Face View
B.3.2
PS_FACE_VIEW
Family Classes
B.5.5
PS_FAMILY_CLASS
Flatten Viewport
C.19
PS_VIEWPORT_FLATTEN
Free View
B.3.5
PS_FREEVIEW
Global Settings
A.6
PS_GLOBAL_SETTINGS
Global Scale
C.9
PS_SCALE
Global View
B.3.3
PS_GLOBAL_VIEW
Groundplates
B.17
PS_GROUNDPL
Groups
B.27
PS_GROUP
Gusset Plates
B.22
PS_GUSSET_PLATE
Hatches
B.25
PS_VOUTE
Hide
B.5.1
PS_HIDE
Hide Exclude
B.5.1
PS_HIDE_EXCLUDE
Hide Exclude Plane
B.5.1
PS_HIDE_EXCLUDE_PLANE
Hide Group Exclude
B.5.1
PS_HIDE_GROUP_EXCLUDE
Hide Group
B.5.1
PS_HIDE_GROUP
Hide Plane
B.5.1
PS_HIDE_PLANE
Hole Display
C.17
PS_HOLE_DISPLAY_STYLE
Insert Gratings
B.9.3
PS_PLATE
Insert Plates
B.9
PS_PLATE
E
F
G
H
I
Page E.7 - 3
ProSteel Command Reference Insert Shapes
B.8
PS_INS_PROF
Intersection 3D-Volume
B.11.7
PS_COMMEN
Language Selection
A.2
PS_LANGUAGE
Layer Functions
B.1
PS_LAYER
Manual 2D-Cut
C.11
PS_MAN_CUT
Manual 2D-Shortening
C.15
PS_SHORT2D
Manual Dependency of Part
C.8
PS_MANUAL_LINK
Manual Dimensioning
C.12
PS_DIM
Measure Distance
B.2.2
PS_CONST_MSE
Move and Copy Parts
B.4
PS_COPY
B.11.6
PS_NOTCH
Object View
B.3.1
PS_OBJ_VIEW
Object-UCS
B.3.1
PS_OBJ_UCS
Outlet
B.11.1
PS_OUTLET
Perspective View
B.3.7
PS_PERSP
Plate Editor
B.12
PS_PLATE_EDITOR
Positioning
B.28
PS_POS
Process Partlist
B.30.2
PS_CREATE_PARTLIST
Project Management
A.5
PS_PROJECT
Process Status
B.5.6
PS_PROCESS_STATUS
Purlin Connection
B.21
PS_PURLIN_CONN
Regenerate
B.5.2
PS_REGEN
Roof and Wall Covering
D.3
PS_ROWADISPATCH
Rounding off Plate Edge
B.12.2
PS_BEND_EDGE
L
M
N Notch O
P
R
Page E.7 - 4
ProSteel Command Reference
S Search Parts
B.5.7
PS_SEARCH
Seize Partslist
B.30.1
PS_PARTLIST
Shear Plates
B.19
PS_SCHEARPLATE
Simulate Movement
D.5.4
PS_KINEMATIK
Special Parts
D.1.1
PS_CREATE_SPEZPART
Special Shapes
D.1.2
PS_CREATE_SOPRO
Static Effective Lines
D.6
PS_ANALYSIS
Stiffeners
B.15
PS_RIP
Structural Element Joist
E.7
PS_JOIST
Structural Element Truss Girder
E.4
PS_TRUSS
Structural Element Handrail
E.2
PS_HANDRAIL
Structural Element Hangar Frame
E.3
PS_FRAME
Structural Element Purlin Position
E.5
PS_PFETTE
Structural Element Ladder
E.6
PS_LADDER
Structural Element Stairs
E.1
PS_STAIRS
Subtract 3D-Volume
B.11.7
PS_SUB
Subtract Intersection 3D-Volume
B.11.7
PS_COMMEN_SUB
Top View
B.3.4
PS_TOPVIEW
Tubes Unwind
D.5.3
PS_UNWIND
B.5.3
PS_HIDE_CLASS
T
V Visibility Classes
Page E.7 - 5
ProSteel Command Reference
W Webangle
B.18
PS_STEGW
Weldmarks
C.14
PS_WELD
Workframe Views
B.7
PS_SETBKS
Workframes
B.6
PS_WORKFRAME
Page E.7 - 6
Own Notes
E.10 Own Notes
Page E.10 - 1
Own Notes
Page E.10 - 2
View more...
Comments
