Retail scale BC II Basic Class II Operating instructions from program version 2..20 6.111.98.5.01.13 en
Alle Rechte vorbehalten All rights reserved Tous droits réservés Reservados todos los derechos Tutti i diritti riservati
© 06 / 2011 Bizerba GmbH & Co. KG, 72336 Balingen Postfach 10 01 64 72301 Balingen/Germany, Tel. (+49 7433) 12-0, Fax (+49 7433) 12-2696 e-mail:
[email protected] Internet: http://www.bizerba.com
Translation of original operating instructions
6.111.98.5.01.13
Chapter index About these instructions About the device
1 2
Installation
3 4
Device and operating controls
5
Operation
6
Programming
7
Troubleshooting
8
Maintenance
9
Technical data
10
Subject index
11
Safety instructions
6.111.98.5.01.13
6.111.98.5.01.13
Operating instruction BC II
List of contents
List of contents 1
2
3
4
Page
About these instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -
1
1.1
Safe-keeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -
1
1.2
Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -
1
1.3
Symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -
2
1.4
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -
3
Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 -
1
2.1
Device types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 -
1
2.2
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 -
1
2.3
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 -
1
2.4
Designation label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 -
2
2.5
Verification information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 -
3
2.6
Standards and guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 -
4
2.7 2.7.1
Operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 -
5 6
2.8
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 -
7
2.9
Disposal of devices/environmental protection . . . . . . . . . . . . . . . . . 2 -
7
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
1
3.1
Requirements on the operating personnel . . . . . . . . . . . . . . . . . . . . 3 -
1
3.2
Device signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
1
3.3
Sources of risk related to the system . . . . . . . . . . . . . . . . . . . . . . . . 3 -
2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -
1
4.1
Transport and storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -
1
4.2 4.2.1 4.2.2 4.2.3 4.2.4
Installation and assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conditions for the place of installation . . . . . . . . . . . . . . . . . . . . . . . Assemble the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Leveling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Check the electric connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation of customer's power supply . . . . . . . . . . . . . . . . . . . . . . Cable connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Example of scale network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 1 1 2 3 3 4 5
4.2.5
6.111.98.5.01.13
4 4 4 4 4 4 4 4
-
0-1
List of contents
Operating instruction BC II Page
5
6
4.2.6
Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Operation with rechargeable batteries . . . . . . . . . . . . . . . . . . . . . . . 4 Battery icon display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -
6 6 7
4.3 4.3.1
Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Switch on device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -
8 8
4.4
Decommissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -
8
Device and operating controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 -
1
5.1
Main switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 -
1
5.2 5.2.1
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Display icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 -
2 2
5.3 5.3.1 5.3.2 5.3.3 5.3.4
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Membrane keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Key functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keyboard options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 5 5 5 5
-
3 3 4 4 7
5.4 5.4.1 5.4.2 5.4.3 5.4.4
Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printer and side cover for BC II 100/200 . . . . . . . . . . . . . . . . . . . . . . Opening and closing the thermal print head . . . . . . . . . . . . . . . . . . Ticket printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Label printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 5 5 5 5
8 8 - 10 - 11 - 12
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
1
6.1
Switching on device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
1
6.2
Switch off device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
1
6.3
Zerosetting device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
1
6.4 6.4.1 6.4.2 6.4.3 6.4.4 6.4.5 6.4.6 6.4.7
Operating options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Multiple-operator mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Self-service mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick-service mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Price labeling with manual triggering * . . . . . . . . . . . . . . . . . . . . . . . Price labeling with automatic start * . . . . . . . . . . . . . . . . . . . . . . . . . . Piece price multi- label printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fixed weight label multi-printing . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-
2 2 3 4 5 6 7 8
6.5 6.5.1
Unit price input via 10-key keypad . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operating processes for non-programmed articles (non-PLU) . . 6 -
9 9
6.6
Cancellation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
11
6.7
Scroll function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 12
6.8
Constant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 13
0-2
6 6 6 6 6 6 6 6
6.111.98.5.01.13
Operating instruction BC II
List of contents Page
6.9
Subtotal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 13
6.10
Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 13
6.11 6.11.1 6.11.2
Operating processes for programmed articles (PLU) . . . . . . . . . . . Calling up PLUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operator sales with PLU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Call up PLU and register with PLU direct key. . . . . . . . . . . . . . . . . . ”Overwrite” PLU unit price”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Multiplication of PLU price per piece with input number of pieces Register manual weight input ( depending on country) . . . . . . . . .
6 6 6 6 6 6 6
-
14 14 16 16 16 16 17
6.12 6.12.1
Tare functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tare balancing for unknown tare values . . . . . . . . . . . . . . . . . . . . . . Unknown tare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Batch tare (country-related) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tare balancing for known tare values . . . . . . . . . . . . . . . . . . . . . . . . Manual tare (country-related) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PLU tare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tare fixed value memory 1 - 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operator tare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Save tare value weighed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Save tare value entered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Call up operator tare saved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 6 6 6 6 6 6 6 6 6 6 6
-
18 18 18 19 20 20 21 21 22 22 22 23
6.12.2
6.12.3
6.13
Assisted sales with ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 24
6.14
Talon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 25
6.15
Print ticket upon request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 25
6.16
Repeat ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 26
6.17 6.17.1 6.17.2 6.17.3
Open ticket again . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Open the last ticket via the operator key. . . . . . . . . . . . . . . . . . . . . . Open the ticket via ticket number . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overwrite VAT from PLU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.18
Serviced selling with label layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 29
6.19
By Count article . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 30
6.20
Fixed weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 35
6.21
By Count fixed weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 39
6.22
Scale with cash drawer and payment in /out . . . . . . . . . . . . . . . . . . 6 - 44
6.23 6.23.1 6.23.2
Product with data of origin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 45 Sale with manual input of the traceability number . . . . . . . . . . . . . 6 - 45 Sale with fixed traceability number. . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 46
6.111.98.5.01.13
6 6 6 6
-
26 27 27 28
0-3
List of contents
Operating instruction BC II Page
7
Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 -
1
7.1
Initial display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 -
1
7.2
Menu password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 -
1
7.3
Menu call-up, menu selection and quit menu . . . . . . . . . . . . . . . . . 7 General programming sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 -
2 2
7.4
Initial scale setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 -
3
7.5 7.5.1 7.5.2 7.5.3 7.5.4 7.5.5 7.5.6 7.5.7 7.5.8 7.5.9
Overview of list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PLU article . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Header and footer texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Additional texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Scrolling message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PLU direct keys .................................. Barcode structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BLD labels ........................................ Logos ............................................... VAT rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-
4 4 4 5 5 5 6 6 7 8
7.6
General procedure for text input . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 -
9
7.7
Overview of scrolling messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 14
7.8
Barcode overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manufacturer code WAN 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Instore code EAN 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Code 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.9
Traceability marker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 29
7.10
Overview of By Count article definition . . . . . . . . . . . . . . . . . . . . . . . 7 - 30 Create By Count piece goods in a PLU . . . . . . . . . . . . . . . . . . . . . . 7 - 31
7.11
Create overview of fixed weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 32
7.12
Overview of By Count fixed weight . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 33
7.13 7.13.1
Overview VAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 34 Assign VAT to PLU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 35
7.14
Continuous operation in system (as of program version 2.00) . . . 7 - 36
0-4
7 7 7 7 7 7 7 7 7 7
7 7 7 7
-
15 17 18 23
6.111.98.5.01.13
Operating instruction BC II
List of contents Page
7.15 7.15.1
7.15.2 7.15.3 7.15.4 7.16 7.16.1 7.16.2 7.16.3 7.16.4 7.16.5
7.16.6
7.16.7
PLU maintenance menu Pr 1-- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Create PLU (article) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 110 . Unit price input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use-by date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Barcode for article . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Price overwriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Article type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weight class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Data of origin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PLU article text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Supplementary text 1-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Supplementary text 1 - -10 for BLD text fields . . . . . . . . . . . . . . . . Logo print in BLD logo fields ............................. By Count: Piece per package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unit price back-calculation for By Count and fixed weight . . . . . . By Count: Mandatory input of pieces . . . . . . . . . . . . . . . . . . . . . . . . By Count: Fixed weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . By Count: Fixed weight mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mandatory input of fixed weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VAT number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VAT can be overwritten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tare % (dependent on country) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print PLU (article) lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 115 . Delete PLU (article) individually . . . . . . . . . . . . . . . . . . . . Pr 120 . Delete PLU (article) from - to . . . . . . . . . . . . . . . . . . . . Pr 121 .
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
-
39 40 41 41 41 42 42 43 43 44 44 44 45 45 46 46 47 47 47 47 48 48 48 49 50 51 51
Data maintenance Menu Pr 2-- . . . . . . . . . . . . . . . . . . . . . . . . . . . . Define supplementary texts . . . . . . . . . . . . . . . . . . . . . . . Pr 200 . Create header and footer notes text . . . . . . . . . . . . . . . Pr 201 . Create text of scrolling message . . . . . . . . . . . . . . . . . . . Pr 202 . Print texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 205 . Delete supplementary texts amd header/foot texts . . . Pr 206 . Delete supplementary text individually . . . . . . . . . . . . . . . . . . . . . . . Delete all supplementary texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Delete header and footer texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Delete scrolling message texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Define barcode structure . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 210 . Create barcode format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Enter code constant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Select numeric code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Check and adopt code structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . Administer barcode structure . . . . . . . . . . . . . . . . . . . . . . . Pr 211 .
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
-
52 52 53 54 55 56 56 56 56 57 58 58 59 59 61 62
6.111.98.5.01.13
0-5
List of contents
Operating instruction BC II Page
7.16.8
7.16.9 7.16.10
7.16.11
7.16.12
7.17 7.17.1 7.17.2
7.17.3 7.17.4
7.18 7.18.1
0-6
Non-PLU settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 215 . Sell-by date for non-programmed articles (non-PLU) . . . . . . . . . Barcode for Non-PLU weighed articles . . . . . . . . . . . . . . . . . . . . . . Barcode for non-PLU non-weighed articles (piece goods) . . . . . Barcode for non-PLU minus article . . . . . . . . . . . . . . . . . . . . . . . . . . Barcode for total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product groups for non-PLU weighed articles . . . . . . . . . . . . . . . . Product groups for non-PLU non-weighed articles (piece goods) Product groups for non-PLU minus articles . . . . . . . . . . . . . . . . . . . VAT for Non-PLU weighed articles . . . . . . . . . . . . . . . . . . . . . . . . . . VAT for non-PLU non-weighed articles (piece goods) . . . . . . . . . VAT for Non-PLU minus articles . . . . . . . . . . . . . . . . . . . . . . . . . . . . BLD label list / print logo list . . . . . . . . . . . . . . . . . . . . . . . . Pr220 . Print BLD label list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print logo list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Delete BLD labels / logos . . . . . . . . . . . . . . . . . . . . . . . . . Pr 225 . Delete BLD labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Delete BLD logos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Define VAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 230 . Define VAT rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Incl. or excl. VAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VAT text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manage VAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 231 . Printing VAT list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting VAT number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Same VAT for all articles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
-
64 64 65 65 65 65 66 66 66 67 67 67 68 68 68 68 69 69 69 70 70 70 71 71 71 71
Reports menu Pr 3-- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configure report layout . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 300 . Print reports on ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr310 . Scale report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PLU report with one product text line . . . . . . . . . . . . . . . . . . . . . . . . PLU report with all article text lines . . . . . . . . . . . . . . . . . . . . . . . . . . Product group report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operator report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Traceability data - sales report with one traceability text line . . . . Traceability data - sales report with all traceability text lines . . . . VAT sales report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print report on label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr311 . Display / delete sales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr320 . Display sales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Delete sales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
-
72 72 74 74 75 75 76 77 77 78 79 79 80 80 80
Device Configuration Menu Pr 5-- . . . . . . . . . . . . . . . . . . . . . . . . . . Setting date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr500 . Setting date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print year number with either 2 or 4 digits . . . . . . . . . . . . . . . . . . . . Date representation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 7 7 7 7 7
-
81 81 82 82 82 83
6.111.98.5.01.13
Operating instruction BC II
List of contents Page
7.18.2 7.18.3
7.18.4
7.18.5
7.18.6
7.18.7
7.18.8 7.18.9 7.18.10 7.18.11
Select type of paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 505 . Setting main operating mode Pr 510 . Select main operating mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Select layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Addition of customer total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting switching operating mode . . . . . . . . . . . . . . . . . . . Pr 511 . Select switching operating mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . Select layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Addition of customer total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Settings for different operating modes . . . . . . . . . . . . . . Pr 515 . Automatic zerosetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Open tickets / labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Traceability marker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Define traceability number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Negative customer total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sales calculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Compulsory entry for By Count pieces . . . . . . . . . . . . . . . . . . . . . . . Compulsory entry for fixed weight . . . . . . . . . . . . . . . . . . . . . . . . . . . Scrolling message settings . . . . . . . . . . . . . . . . . . . . . . . Pr 516 . Select scrolling message no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Select display location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Activate scrolling message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Test scrolling message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Settings for multi-operator mode . . . . . . . . . . . . . . . . . . . Pr 520 . Constant key function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print article and total label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operator items display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cash functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Payment in/out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Talon print-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repeat ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Open ticket again . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print cancellation and canceled articles . . . . . . . . . . . . . . . . . . . . . . Printing included VAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print ticket if requested . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Settings for multi-operator mode Pr 521 . Settings for price labeling mode * . . . . . . . . . . . . . . . . . . Pr 525 . Labeling mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Piece price multiple label printing . . . . . . . . . . . . . . . . . . . . . . . . . . . Configure operator keys with operator no. . . . . . . . . . . . Pr 530 . PLU input mode and range limitation . . . . . . . . . . . . . . . Pr 535 . 10-key keypad for unit price or PLU input . . . . . . . . . . . . . . . . . . . . PLU entry: Number of digits for input via a 10-key keypad. . . . . . PLU direct key mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PLU direct key allocation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PLU range limitation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Delay time PLU no. input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.111.98.5.01.13
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
- 84 - 84 - 85 - 85 - 85 - 86 - 86 - 86 - 87 - 87 - 87 - 88 - 88 - 88 - 88 - 89 - 89 - 89 - 90 - 90 - 90 - 90 - 91 - 91 - 91 - 92 - 93 - 93 - 94 - 94 - 94 - 94 - 95 - 95 - 95 - 96 - 97 - 97 - 98 - 99 - 99 - 99 - 100 - 100 - 100 - 101 - 102
0-7
List of contents
Operating instruction BC II Page
7.18.12 7.18.13 7.18.14
7.19 7.19.1
0-8
Print out PLU direct keys . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 536 . Tare fixed value memory . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 540 . Rounding and price calculation settings for national currency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr545 . Rounding methods for customer total * . . . . . . . . . . . . . . . . . . . . . . . Rounding of article total * .............................. Rounding for By Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 - 103 7 - 104 7 7 7 7
-
104 105 105 106
Ticket design overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Create ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 550 . Print barcode on ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Barcode height in mm on ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print tare on ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print header text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print footer text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print foreign currency supplementary text . . . . . . . . . . . . . . . . . . . . Print rounding supplementary text . . . . . . . . . . . . . . . . . . . . . . . . . . . Font change on ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of PLU article text lines to be printed on ticket . . . . . . . . . Ticket counter printout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print foreign currency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print amount paid in/out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print supplementary texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print header logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print footer logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
-
107 108 108 108 109 109 109 110 110 111 111 111 112 112 112 113 113
6.111.98.5.01.13
Operating instruction BC II
List of contents Page
7.20 7.20.1
7.20.2
7.20.3
Label design overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BLD labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Create labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 555 . Label type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Select BLD labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Label size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Change label distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Packaged-on and sell-by date on label . . . . . . . . . . . . . . . . . . . . . . Barcode on label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Barcode height in mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tare printout on label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print header text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Alternative text for sell-by date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Logo printout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Start of text field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Start of data field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Data field monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Font change on label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print price frame and texts on label . . . . . . . . . . . . . . . . . . . . . . . . . . Print operator no., machine ID, or check digit * on label . . . . . . . . Print foreign currency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180º rotation and reverse operation (for label paper only) . . . . . . Alternative text for packaged-on date . . . . . . . . . . . . . . . . . . . . . . . . Alternative text for use-by date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print units on the label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print speed for label layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Labels configuration management . . . . . . . . . . . . . . . . . Pr 556 . Save configuration from Pr 555 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Select label configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Delete label configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Foreign currency settings . . . . . . . . . . . . . . . . . . . . . . . . . Pr 560 . Select foreign currency function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Select foreign/ second currency display . . . . . . . . . . . . . . . . . . . . . . Foreign currency calculation method . . . . . . . . . . . . . . . . . . . . . . . . Foreign currency characters for ticket and label layout . . . . . . . . . Foreign currency characters on label for price field . . . . . . . . . . . . Decimal places in foreign currency . . . . . . . . . . . . . . . . . . . . . . . . . . Foreign currency factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Currency exchange rate (calculation factor) . . . . . . . . . . . . . . . . . . Rounding of foreign currency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.111.98.5.01.13
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
-
114 115 116 117 118 118 118 118 119 119 119 120 120 120 121 121 122 123 123 123 124 124 126 126 126 126 127 127 128 128 129 129 129 130 130 130 130 131 131 131
0-9
List of contents
Operating instruction BC II Page
7.21 7.21.1
7.21.2 7.21.3 7.21.4 7.21.5 7.21.6 7.21.7
7.21.8
7.21.9 7.21.10 7.21.11
7.21.12 7.21.13 7.21.14 7.21.15 7.21.16 7.21.17
0 - 10
Database configuration menu Pr 6-- . . . . . . . . . . . . . . . . . . . . . . . . TCP-IP settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr600 . DHCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display of current scale IP address . . . . . . . . . . . . . . . . . . . . . . . . . . IP: IP address if no DHCP selected . . . . . . . . . . . . . . . . . . . . . . . . . . Subnet: Subnet mask if no DHCP is selected . . . . . . . . . . . . . . . . . Gateway: Address of router if no DHCP is selected . . . . . . . . . . . DNS1: Address of domain name server 1, if no DHCP selected DNS2: Address of domain name server 2, if no DHCP selected . Host name: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Leasing address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display current IP address . . . . . . . . . . . . . . . . . . . . . . . . . Pr601 . Print out of communication settings . . . . . . . . . . . . . . . . . . Pr602 . Setting scale number . . . . . . . . . . . . . . . . . . . . . . . . Pr 603 . Setting department number . . . . . . . . . . . . . . . . . . . . . . . . Pr604 . Setting machine ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr605 . Database configuration (memory management) . . . . . . Pr 606 . No. of PLUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of supplementary texts per PLU . . . . . . . . . . . . . . . . . . . . . Number of BLD text fields per PLU . . . . . . . . . . . . . . . . . . . . . . . . . . Number of BLD logo fields per PLU . . . . . . . . . . . . . . . . . . . . . . . . . Number of supplementary texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of items (ticket memory) . . . . . . . . . . . . . . . . . . . . . . . . . . . . By Count, fixed weight, VAT and tare % . . . . . . . . . . . . . . . . . . . . . . Decimal places* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Start Database configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting scale for system (continuous operation) . . . . . . Pr 607 . Scale type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Multicast IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Multicast port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UDP port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control display lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 610 . Turn-of f time of scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr615 . WLAN settings Pr 621 . Activate WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Time slices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ping on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP address of WLAN module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Test telegram on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP address of telegram recipient . . . . . . . . . . . . . . . . . . . . . . . . . . . . Port number of telegram recipient . . . . . . . . . . . . . . . . . . . . . . . . . . . Beeper on/off Pr 622 . Sensitivity of scale (display) . . . . . . . . . . . . . . . . . . . . . . . . Pr625 . Change key function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 630 . Keyboard selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr631 . RAM clearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 666 . Enter password for menu . . . . . . . . . . . . . . . . . . . . . . . . . Pr 690 .
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
- 132 - 132 - 133 - 133 - 133 - 133 - 133 - 134 - 134 - 134 - 134 - 135 - 135 - 135 - 135 - 136 - 136 - 137 - 137 - 137 - 137 - 137 - 138 - 138 - 138 - 139 - 140 - 140 - 141 - 141 - 141 - 142 - 143 - 143 - 144 - 144 - 145 - 145 - 146 - 146 - 146 - 146 - 147 - 148 - 149 - 150 - 150
6.111.98.5.01.13
Operating instruction BC II
List of contents Page
7.21.18
Second currency exchange rate (Euro) setting . . . . . . . Pr 695 . 7 - 151 Change main currency to second currency (Euro) . . . . . . . . . . . . . 7 - 151 Convert PLU price into EURO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 151
7.22 7.22.1 7.22.2 7.22.3 7.22.4 7.22.5 7.22.6
7.22.10 7.22.11 7.22.12
Service menu Pr 7-- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Test print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 700 . Print boot log information . . . . . . . . . . . . . . . . . . . . . . . . . Pr 701 . Print fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 702 . Print menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 703 . Print weighing system information . . . . . . . . . . . . . . . . . . Pr 704 . Printer settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 710 . Feed for labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Move print format on the label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Correct ticket feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sensitivity for paper end detection for ticket . . . . . . . . . . . . . . . . . . Change printing intensity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display ADC programming version . . . . . . . . . . . . . . . . . Pr 712 . Display load cell type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 715 . Display program version . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 716 . Main program version number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bootloader version number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Option resource version number . . . . . . . . . . . . . . . . . . . . . . . . . . . . Layout resource version number . . . . . . . . . . . . . . . . . . . . . . . . . . . . Menu resource version number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Text resource version number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keyboard resource version number . . . . . . . . . . . . . . . . . . . . . . . . . Font resource version number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Software version number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display battery voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 717 . Display test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr 718 . Logbook control Pr 730 .
7.23
Programming overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 163
7.22.7 7.22.8 7.22.9
6.111.98.5.01.13
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
-
152 152 152 153 153 154 155 155 155 156 156 156 157 157 158 158 158 158 158 158 158 158 158 158 159 160 160
0 - 11
List of contents
Operating instruction BC II Page
8
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 -
1
8.1
Fault description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 -
1
8.2
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 -
2
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 -
1
9.1 9.1.1 9.1.2 9.1.3
Cleaning Cleaning Cleaning Cleaning
................................................. device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . the printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . products for printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 9 9 9
-
1 1 2 4
9.2 9.2.1 9.2.2 9.2.3
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Testing the weight display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Note on storing thermal paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ticket, label and Linerless rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 9 9 9
-
6 6 6 6
10 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 -
1
9
10.1
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 -
1
10.2
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 -
2
10.3
Environmental conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Threshold values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 -
2 2
Subject index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 -
1
Appendix Declaration of Conformity for BC ll Declaration of Conformity for BC ll with WLAN eurofins Certificate modas BWLC-V2
0 - 12
6.111.98.5.01.13
Operating instruction BC II
1
About these instructions
1
About these instructions
Read through the operating manual carefully before connecting and switching on the device to ensure that you fully utilize the quality and possibilities of application this device offers. This operating manual explains how to operate and set the device. It also includes functions that are only required by Bizerba Service. Contact your Bizerba technical consultant if necessary. Our products are subject to constant further development and various country-specific regulations. Pictorial and graphic examples in the instructions may differ from the supplied version.
1.1
Safe-keeping
This operating manual is an integral part of the device and must be kept next to it, easily accessible for all personnel. If the device is resold, the complete operating manual must be provided with it.
1.2
Target group
The device may only be operated by trained personnel. This means that the operator must be familiar with the contents of this operating manual. Installation, servicing and repairs may only be performed by qualified personnel authorized by Bizerba.
6.111.98.5.01.13
1-1
About these instructions
1
1.3
Operating instruction BC II
Symbols used
Various symbols are used in these instructions.
Symbol
Meaning Text with arrow prompts you to carry out an action. Key symbols prompt you to press this key on
Mod
+
Key symbols with a + prompt you to keep the 1st key held down while you press the second key.
1
Position numbers in figures.
Text within < > describes a key.
”Display”
Text within ” ” indicates the display text.
Notes _______________________________________________________________________ Observance of these notes is mandatory. _______________________________________________________________________
Information _______________________________________________________________________ This information is provided for greater understanding. _______________________________________________________________________
Menu settings Prerequisites and menu settings for functions or rules are highlighted in gray. Menu settings are the prerequisites for descriptions or operation procedures. Menu setting - Pr 110/ 06 -1
Price overwrite permitted
Syntax: Pr 110/ 06 -1 Pr 110 Program number “110” / 06 Submenu “06” -1 Setting “1”
1-2
6.111.98.5.01.13
Operating instruction BC II
1.4
About these instructions
1
Warnings
Warnings are divided into danger levels by the signal word. Signal word Symbol
Meaning
_______________________________________________________________________ DANGER
Source of danger with high risk with imminent danger for personnel! The consequences are: - critical injuries - severe damage to health Measures to avoid the danger are specified.
_______________________________________________________________________
_______________________________________________________________________ WARNING
Source of danger with medium risk with potentially threatening danger for personnel! The consequences can be: - serious injuries - damage to health - serious damage to property Measures to avoid the danger are specified.
_______________________________________________________________________
_______________________________________________________________________ CAUTION
Source of danger with low risk with potentially threatening danger for personnel! The consequences can be: - Injuries - Damage to property Measures to avoid the danger are specified.
_______________________________________________________________________
_______________________________________________________________________ CAUTION
Source of danger, improper use! Damage to property can result. Measures to avoid the danger are specified.
_______________________________________________________________________
6.111.98.5.01.13
1-3
About these instructions
Operating instruction BC II
1
1-4
6.111.98.5.01.13
Operating instruction BC II
2
Device
2.1
Device types
About the device
2
The BC II device type is available with either a thermal ticket printer or a label printer. T = Thermal ticket printer E = Label printer BC II 800 T BC II 800 E
Fig. 1: BC II 800 BC II 100 T BC II 100 E
Fig. 2: BC II 100 BC II 200 T BC II 200 E
Fig. 3: BC II 200
2.2
Accessories
We offer a comprehensive accessories program for the device. Please contact your Bizerba technical consultant for further information.
2.3
Intended use
The BC II scale is particularly suitable for counter sales, quick and self-service, as well as manual price labeling and simple cash reg. (POS) functions. Use devices only for intended use.
6.111.98.5.01.13
2-1
About the device
2.4
2
Operating instruction BC II
Designation label
Designation label of a verified scale.
BC II 800
Fig. 4: Explanations of the individual labels:
Explanations of the individual labels: 11147xxxxx
Designation label no.
CE 07
CE certification with the last two digits of the year in which the CE certification was applied.
0103
Identification number of the appointed body ”Verification Ma‐ nagement - Stuttgart”
D07-09-014
No. of EC type approval
M BIZERBA
green square symbol (sign for EC-first verification) Manufacturer Note on recommended battery change - the battery in the CPU unit should be replaced by Bizerba Customer Service in the year printed on the label. A defective battery can result in the loss of saved data.
BCII
Type designation (basic type)
Nr./No.
Device No.
Max 6 kg
Maximum load Max
Min 20 g
Minimum load Min
e=2g
Verification value , e
T= - 6 kg
Subtractive tare maximum load T= -
MADE BY BIZERBA
Manufacturer
120-240V 0.2-0.1A 50/60Hz
Electrical data Scale accuracy class III
2-2
6.111.98.5.01.13
Operating instruction BC II
2.5
About the device
Verification information
2
Verification information for EC countries The green M (sign for EC-first verification) is on the designation label of the scale. This type of scale can be put into operation and used on site provided that it is not connected to an additional device, e.g. cash register or printer. Scales that are connected on site to an additional device (e.g. cash register or printer) must have their first verification carried out either by the responsible verification office or by a verification officer from Bizerba. Scales as well as the additional device (e.g. cash register) must be tested and verified. If the scale fulfills the verification specifications with their additional device, it can be used in legal for trade applications. In the case of extensions at a later date, once the scale has already been put into operation, the relevant verification office must be informed. Scales and additional devices without the CE mark may not be used in legal for trade operations. Scales that are verified to a specific verification zone (acceleration of fall) (details are given on the designation label) may not be used in other verification zones without being reverified. According to statutory regulations, the user of a scale must ensure that it is used for its intended purpose. This includes observation of the verification guidelines, in particular amendments, supplements and additions. Reverification information Reverification of scales is executed according to the respective statutory country regulations. The verification validity period in Germany for example, for scales is usually 2 years. Price labeling scales have a verification validity period of 1 year. The verification validity period begins when the scales are put into circulation (installation and commissioning). Please refer here to the designation label (in the present example, 2007, as the designation is CE 07). Verification information for non-EU countries The statutory regulations of the specific countries must be observed.
_______________________________________________________________________ A yellow mark of conformity is affixed to the load receptor of the scale, with the inscription ”Verified by BIZERBA” (first verification by Bizerba). Reverifications must be carried out by the operator of the scale according to the legal requirements. _______________________________________________________________________
6.111.98.5.01.13
2-3
About the device
2.6
2
Operating instruction BC II
Standards and guidelines
The equipment fulfils the following requirements: Measuring technology Directive 90/384/EEC
scales guidelines ”nonautomatic scales”
OIML R76-Ed. 2006
Organisation internationale de métrologie légale Nonautomatic weighing instruments
DIN EN 45501
Metrological aspects of nonautomatic scales
OIML R60
Metrological regulation for load cells
WELMEC 2.3
Guideline for software testing
Handbook 44
Specifications, tolerances and other technical require‐ ments for weighing and measuring devices (USA)
Publication 14
Weighing devices, Checklist, Test procedures (USA)Weights and Measures Act (Canada)
Electromagnetic compatibility Directive 2004/108/ EC
EMC-guideline
DIN EN 61000-6-1/ 2007-10
interference resistance Residential, commercial and light industry
DIN EN 61000-6-3/ 2007-09
emitted interference Residential, commercial and light industry
DIN EN 61000-3-2/2006-10
Harmonics current
DIN EN 61000-3-3/2009-06
Voltage fluctuations and flickers
GB 9254-1998
Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement
Electrical safety Directive 2006/ 95 EC
Low voltage guideline
IEC 60950-1/ 2001
Information technology equipment - Safety
DIN EN 60950-1/ 2006-11
Information technology equipment - Safety
UL 60950-1/ 2006-07
Information technology equipment - Safety
DIN EN 60529/ 2000-09
Protection types provided by housing (IP code)
2-4
6.111.98.5.01.13
Operating instruction BC II
2.7
About the device
Operating conditions
Do not install or commission equipment until the operating conditions have been fulfilled.
-
Temperature and air humidity: The permitted values and class of protection are found on the designation label on the device and on page 10 - 2.
-
Installation area A flat, vibration-free position as well as the driest possible installation must be guaranteed for our equipment. Vibrations can affect measurements made by the scales.
-
Align horizontally To ensure the precision of the sales, it is of absolute necessity that the device is aligned horizontally.
-
Draft Drafts can affect the measurements made by the scales.
-
Air convection Free air convection must be able to form around the device in order to avoid inadmissible heating.
-
Supply voltage The permitted values can be found on the designation label on the device - and see page 10 - 2.
-
Trained personnel: Only trained personnel can maximize the performance of the device and avoid risks.
-
Written consent for modifications: Modifications to the devices require our prior written consent. External data dialog between Bizerba equipment and other manufacturers' equipment, the hardware and software required, test and modification work, must be clarified with us in writing.
Please contact us or our competent customer service points if you have any doubts regarding the practical application of these conditions. For other manufacturers' equipment included in our scope of supply, the respective manufacturer's regulations take preference if they deviate from our conditions.
6.111.98.5.01.13
2-5
2
About the device
2.7.1
2
Operating instruction BC II
Power supply
The installation of the mains power supply for connecting to our equipment must be carried out in accordance with the international specifications and the regulations derived from them. These essentially include the recommendations of at least one of the following commissions: -
International Electrotechnical Commission (IEC)
-
European Committee for Electrotechnical Standardization (CENELEC)
-
Association of German Electrotechnicians (VDE)
Our units are built to VDE protection class I and must be connected to a protective conductor. Interference suppression measures If the mains power supply is subject to electric interference, interference suppression measures must be taken on site, e.g.: -
provision of separate mains cable to our equipment.
-
in problem cases, insertion of capacitively decoupled isolating transformers or other suppressors into the mains supply lines to our equipment.
2-6
6.111.98.5.01.13
Operating instruction BC II
2.8
About the device
Warranty
Installation, commissioning and initial training must be carried out by trained staff from our sales offices and customer service points or by companies authorized by us. We do not accept any liability for damages resulting from: -
Non-compliance with our operating conditions and operating manual.
-
Defective electrical installation by the customer.
-
Structural changes to our equipment.
-
Removal of verification seals and fuse stamps.
-
Incorrect programming and operation.
-
Natural wear and tear..
The warranty will lapse if defects/damage occur as a result of interventions by persons we have not authorized or the use of non-Bizerba genuine spare parts. If you reset or program devices, check the new setting with a test run and test printout. This helps to avoid faulty results. Only trained staff may operate the equipment. Check that our products are handled correctly and repeat training if necessary. Our products are subject to constant further development and various country-specific regulations. Pictorial and graphic examples in the operating manual may differ from the supplied version.
2.9
Disposal of devices/environmental protection
_______________________________________________________________________ Only applies to Germany! _______________________________________________________________________ This device includes batteries which are subject to the Batteries Act concerning return and disposal of used batteries and accumulators. This act holds you as the end user responsible to return the device to the manufacturer or its distributor for the purpose of recycling and proper disposal after the end of its intended use. Bizerba and its distributors are ready to except the returns of your old devices which are no longer operated. In these instances, please, contact your Bizerba specialist in charge. If the device includes a chargeable battery pack, according to the Battery Act you are responsible to return used battery packs to the distributor or to return locations which are provided to the public. Of course, Bizerba and its distributors will also accept your used battery packs.
6.111.98.5.01.13
2-7
2
About the device
Operating instruction BC II
2
2-8
6.111.98.5.01.13
Operating instruction BC II
3
Safety instructions
Safety instructions
The safety instructions must be observed throughout the installation, operation, cleaning and maintenance procedures.
3.1
3
Requirements on the operating personnel
The device may only be operated by people who have been instructed in the operating procedure. The operating personnel must read and understand the safety instructions in this Operating Manual. Please pay special attention to and memorize all safety and hazard information! Carry out regular training! Operators (purchasers) as well as supervisory and operating staff must carry out programming and data protection on our systems and equipment exclusively in accordance with our operating and programming instructions. Only use equipment for its intended purpose.
3.2
Device signs
Remove the mains plug from the socket
Fig. 5: Remove the mains plug from the socket
6.111.98.5.01.13
3-1
Safety instructions
3.3
Operating instruction BC II
Sources of risk related to the system
_______________________________________________________________________
3
For safety reasons, shut equipment down immediately in the event of recurring faults, damage of any type, and suspicion of risk of injury. Always inform the nearest customer service point. _______________________________________________________________________ _______________________________________________________________________ Check before mains connection Before connecting the device, check -
the power supply data on the designation label
-
the power supply data of the mains supply
_______________________________________________________________________ _______________________________________________________________________ WARNING
Incorrect supply voltage ! Destruction of electrical components, risk of fire. -
Do not connect the device to the electric mains if the power supply data do not match the connection values of the scale. The power supply data must be identical.
-
Inform Bizerba Customer Service.
_______________________________________________________________________ _______________________________________________________________________ CAUTION
Voltage at switched-off scale! Even when the scale is switched off, the scale electronics is live.
-
Remove the AC power plug to disconnect from the mains.
_______________________________________________________________________
_______________________________________________________________________ WARNING
Opening the device! Electric shock. -
The device may only be opened by trained and qualified Bizerba personnel.
_______________________________________________________________________
3-2
6.111.98.5.01.13
Operating instruction BC II
4
Installation
4.1
Transport and storage
Installation
Always transport and store the device in the original packaging
4 4.2
Installation and assembly
Installation, first commissioning, adjustment, initial instruction, Maintenance and repair may only be performed by our customer service and/or by companies or persons authorized by us.
4.2.1
Conditions for the place of installation
The place of installation must fulfil the following conditions. -
Flat installation surface.
-
Freedom from vibrations, oscillations and drafts, as well as the driest possible installation must be guaranteed for our equipment.
-
The equipment must be arranged with respect for operating and work sequence, and taking account of maintenance aspects.
4.2.2
Assemble the device
Unpacking Open packaging, remove accessories and lift the device carefully out of the packaging.
6.111.98.5.01.13
4-1
Installation
4.2.3
Operating instruction BC II
Leveling
To compensate for any small irregularities in the floor space, the scale can be leveled at the foot screws using a spirit level. _______________________________________________________________________
4
After each change of location, the scale must be re-leveled. _______________________________________________________________________ 1
Position the spirit level
2
Foot screws
1 2
Fig. 6: BC II 800
2 1
Fig. 7: BC II 100 Turn the foot screws 2 until the air bubble 3 is located in the center of the spirit level . 1
1
3
Fig. 8: Leveling
4-2
6.111.98.5.01.13
Operating instruction BC II
4.2.4
Installation
Check the electric connection
_______________________________________________________________________ WARNING
Incorrect supply voltage! Destruction of electrical components, risk of fire. -
Do not connect the device to the electric mains if the power supply data do not match the connection values of the scale. The power supply data must be identical.
-
Inform Bizerba Customer Service.
_______________________________________________________________________
Installation of customer's power supply The installation of the mains power supply for connecting to our equipment must be carried out in accordance with the international specifications and the regulations derived from them. These essentially include the recommendations of at least one of the following commissions: -
International Electrotechnical Commission (IEC)
-
European Committee for Electrotechnical Standardization (CENELEC)
-
Association of German Electrotechnicians (VDE)
_______________________________________________________________________ Check before mains connection Before connecting the device, check -
the power supply data on the designation label
-
the power supply data of the mains supply
_______________________________________________________________________
6.111.98.5.01.13
4-3
4
Installation
4.2.5
Operating instruction BC II
Cable connections
_______________________________________________________________________ CAUTION
4
Do not insert or remove the connection cable when the device is switched on. Interfaces are either defect or misfunctioning. Always switch off the device before inserting or removing the connection cable.
_______________________________________________________________________ _______________________________________________________________________ Secure the power cable against falling out when strain drops. 4 _______________________________________________________________________ 1
EDP (scale network)
2
Cash drawer
1
3
Power cable
2
4
Clip (strain relief)
4
3
Fig. 9: BC II 100 / 200 1
EDP (scale network)
2
Cash drawer
3
Power cable
4
Clip (strain relief)
2 1 4 3
Fig. 10: BC II 800
4-4
6.111.98.5.01.13
Operating instruction BC II
Installation
Example of scale network Several scales are connected with a switch. Switch
4
Scale1
1
1
Scale 2
1
Scale 3
1
Scale 4
1
Scale 5 1
Scale 6
1
Connection scale (EDP, scale network)
_______________________________________________________________________ During installation and cabling of systems the Bizerba guideline “Networks for scales” need to be adhered to. Ask your Bizerba consultant or Bizerba Service. _______________________________________________________________________
6.111.98.5.01.13
4-5
Installation
4.2.6
Operating instruction BC II
Rechargeable battery
The BC II devices are available with and without rechargeable batteries. _______________________________________________________________________ WARNING
4
Replace the rechargeable battery! Risk of explosion if not replaced properly. -
The installation or removal of the battery may only be carried out by our customer services and/or a company or person assigned by us.
_______________________________________________________________________
_______________________________________________________________________ Charge battery completely before battery operation. Procedure: - Connect mains to scale. - Switch on scale. _______________________________________________________________________ Depending on the use and ambient temperature, with a fully charged battery, the scales can be operated for 20-25 hours without being connected to the mains. After only 6-7 hours charging time the battery is completely recharged.
Operation with rechargeable batteries Rechargeable batteries will run down even during prolonged idle periods if the scale is not connected to the mains. Therefore, connect the scale to the mains at least every 3months. If the scales are being powered by the mains, the batteries are recharged when switched on (conservation charging). _______________________________________________________________________ If the scales are operated at an ambient temperature below 0_C, the battery cannot be recharged. _______________________________________________________________________ Overloading the batteries is prevented automatically by an integrated charging circuit. This charging circuit also prevents any damaging total discharge. The battery lifetime reduces if it is permanently operated at an almost discharged state. _______________________________________________________________________ When being operated by battery, the printer prints at a slower speed. Due to this intentional reduced printing speed, the scales can be operated for a longer period when not connected to the mains power supply. _______________________________________________________________________
4-6
6.111.98.5.01.13
Operating instruction BC II
Installation
Battery icon display
1
4
kg
EURO per
EUR
Fig. 11: Display 1 Battery icon
When connected to the mains: --Battery icon not visible. Scales is connected to the mains. The batteries are charged. Arrow flashes slowly Battery is being charged. Arrow flashes very fast The temperature of the battery is less than 0€C. A statement as to the charged state of the battery cannot be made.
When battery operated: Arrow flashes permanently The charging of the battery is OK. Arrow flashes fast Warning, batteries require charging. Depending on the age of the battery and the ambient temperature, it is possible to continue operations for about 60 minutes. Arrow flashes very fast. In addition, a permanent tone occurs for approx. 10 sec. The battery is empty. The device is switched off after 10 seconds.
6.111.98.5.01.13
4-7
Installation
4.3
Operating instruction BC II
Commissioning
Commissioning, as well as instruction on the operation, cleaning, maintenance and servicing is carried out by the relevant Bizerba customer services office or the Bizerba trade consultant.
4 4.3.1
Switch on device
Prerequisite - The device has been installed properly and connected to the mains power supply. -
The scale should not be loaded.
Switch device on/off, see page 6 - 1.
4.4
Decommissioning
If you wish to decommission the scale for a prolonged period of time, -
Switch the scale off.
-
Remove the AC power plug and detach all cable connections.
-
Clean the scale in accordance with the cleaning instructions.
4-8
6.111.98.5.01.13
Operating instruction BC II
Device and operating controls
5
Device and operating controls
5.1
Main switch
5
2
1
Fig. 12: BC II 1 Main switch on BC II 800 2
Main switch on BC II 100 and 200
6.111.98.5.01.13
5-1
Device and operating controls
5.2
Operating instruction BC II
Display 1 2 3 4
5 kg 7
EURO per 6
EUR 5
Fig. 13: Dot 7 display The display is divided into: 1 Dot Matrix (20x208 Dots) 2
Lit icons
3
Symbols printed on the glass panel (dependent on country)
4
Light symbol for system identification
5
Selling price
6
Unit price
7
Weight value
5.2.1
Display icons
Type- and country-dependent icons designate different operating states. The printed icons are marked by arrows that light up. = Net display after taring process = Prepack = Battery operation/battery charging control, = Unit price per kg = Unit price per 100g = Fixed unit price = Constant unit price = Operator number after registration = Character for display of total I
= Symbol for single division scale
II
= Symbol for dual division scale = Symbol for fixed weight for dot 7 display = Symbol for fixed weight for 7 segment display
5-2
6.111.98.5.01.13
Operating instruction BC II
5.3
Device and operating controls
Keyboard
_______________________________________________________________________ Keyboard designs are country-dependent. _______________________________________________________________________
5 5.3.1
Membrane keyboard
There are two transparent modules on the membrane keyboard into which insert-foils can be inserted if required.
2
Insert-foil 30 keys DEU (Country ID, e.g. DEU defines keyboard labeling) Insert-foil 54 keys DEU
3
Membrane keyboard 54 keys
4
Membrane keyboard 30 keys
1
4 3
2
1
Fig. 14: Example of insert-foils Example: 3
2
Fig. 15: Insert foil with 54 key
4
1
Fig. 16: Insert foil with 30 keys.
6.111.98.5.01.13
5-3
Device and operating controls
5.3.2 1
Operating instruction BC II
Keyboard
Keyboard 84 keys
1
5
Fig. 17: Keyboard
5.3.3
Key functions
Fig. 18: Example of keyboard
5-4
6.111.98.5.01.13
Operating instruction BC II Key Tab
1
Device and operating controls
Function - 54
to PLU = Price Look Up (product plus price, text, etc. is displayed)
Z
A
19 - 15 1
-
Non-numeric and special characters after the control character. _______________________________________________________________________ Scrolling message settings for the scale in Pr 516. _______________________________________________________________________
7 - 54
6.111.98.5.01.13
Operating instruction BC II
Programming Data maintenance Pr 2--
7.16.4
Print texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pr205
Prerequisite - Ticket paper is in the printer - Pr 505 -0 Paper type Ticket paper is set Overview of text and article lists, see page 7 - 5. Select 205 Enter submenu
Pr205 01
7
01= Print supplementary texts 02= Print header and footer texts 03= Print scrolling message Confirm
Pr205 01 0
Starting to print The stored texts are printed.
6.111.98.5.01.13
7 - 55
Programming
Operating instruction BC II
Data maintenance 2--
7.16.5
Delete supplementary texts amd header/foot texts
Select 206 Enter submenu
........
Pr206
Pr206 01
01= Delete supplementary text from Pr 200 individually. 02= Delete all supplementary texts from Pr 200. 03= Delete single header and footer text from Pr 201. 04 = Delete single scrolling message text from Pr 202.
7
Confirm
Delete supplementary text individually Submenu 01 Enter text number from Pr200 1-999999999
Pr206 01 ______101
Confirm The text with text number 101 is deleted.
Delete all supplementary texts Submenu Enter 90
02
Pr206 02 90
Confirm All supplementary texts in Pr 200 are deleted.
Delete header and footer texts Submenu
03
Enter text number from Pr201 Confirm Enter text number from Pr201
Pr206 03 _2 - 00 Pr206 03 02 - 15
Confirm Header and footer text with the text numbers 2 to 15 are deleted.
7 - 56
6.111.98.5.01.13
Operating instruction BC II
Programming Data maintenance Pr 2--
Delete scrolling message texts Submenu 01-99
04
Enter text number from Pr202 Confirm Enter text number from Pr202
Pr206 04 _2 - 00 Pr206 04 02 - 15
Confirm Scrolling message texts with text numbers 2 to 15 are deleted.
6.111.98.5.01.13
7
7 - 57
Programming
Operating instruction BC II
Data maintenance 2--
7.16.6
Define barcode structure
.................................................
Pr 210
In Pr 210 the structure of the instore code EAN 13 and the code structure for code 128 is created. _______________________________________________________________________ Examples for - Barcode structure code 128 see pge 7 - 23 - Barcode structure instore code EAN 13 see pge 7 - 18. _______________________________________________________________________
7
Structure for Code 128 and EAN 13 Select210 Submenu 01= Define barcode format 02= Enter code constant 03= Select numeric code 04= Check code structure and save
Enter structure number
1
Pr210
01 - 99 1 Structure number e.g. 02
02 Pr206 01
Confirm structure number Confirm submenu
Create barcode format
Pr210 01
Submenu 01 2 Barcode types 0= EAN13 1= Code 128 3 Height of barcode 00= Barcode height is taken from PR550/02 or Pr555/07. 05 to 22 = Barcode height in mm 4 OCR line 0= OCR line is printed 1= OCR line is not printed 5 Module width 2 or 3 Pixel Confirm
10002 2
3
4
5
3
4
Fig. 71: Example with OCR line
7 - 58
6.111.98.5.01.13
Operating instruction BC II
Programming Data maintenance Pr 2--
Enter code constant Submenu
02
Confirm
l 02
C 20 LI H-
Text and numeric input of up to 20 characters is possible for Code 128. Text input see page 7 - 9 For EAN 13, only numbers with up to 12 digits are possible. Confirm
7 Select numeric code Submenu
03
Confirm 1
2
Pr210 03
01050
Encoded values 1 2 3 01= price 02= Weight 03= No. of pcs. 04= Foreign currency 05= Part string from PLU Starts after 4. digit after the code structure number 06=PLU number 07= Middle check digit Input 07000 Only for EAN 13. middle check digit possible on pos. 6,7 or 8. 08= Unit price 09= Foreign currency unit price 10= Tare 11= Device number, see Pr 605 12= Department number, see Pr 604 13= Operator no. 14= Scale number, see Pr 603 15= 313 Modulo 10 check digit for code 128 16= 131 Modulo 10 check digit for code 128 Number of digits 01 to 10 digits
6.111.98.5.01.13
7 - 59
Programming
Operating instruction BC II
Data maintenance Pr 2-3
7
Conversion of variable values 0= Decimal places as per device setting 1= Decimal places are cut off No rounding occurs. 2= There is a cutoff after the first decimal place. No rounding. 3= After the second decimal place there is a cutoff. No rounding. 4= After the third decimal place there is a cutoff. No rounding. 5= Floating comma only for EAN 13. The code digit (e.g. 22 for price) is increased by the number of omitted digits. The increased code digit means that during scanning of the barcode the number of digits and position of the comma are established. 6= The value to be coded is multiplied by 10 7= The value to be encoded is multiplied by 10. 8= The value to be encoded is multiplied by 100. 9= The value to be encoded is multiplied by 1000.
Brief example: Define code structure for Code EAN 13 (12digits required) Pr 210 05 Create structure number e.g. 05 Pr 210/ 01 00002 (EAN 13 with OCR) Pr 210/ 02 21 Constant e.g. 21 (2 digits) Pr 210/ 03 Pr 210/ 03 Pr 210/ 03
06040 07000 02050
PLU number (4 digits) Middle check digit (1 digit) Weight with (5 digits)
Pr 210/ 04
Check and save structure
1
Constant
2 digits
2
PLU number
3
Middle check digit 1 digit
4
Weight
5
Automatic check digit of the scale
4-digits 5 digits
1
2
3
4
5
Fig. 72: Example of barcode
7 - 60
6.111.98.5.01.13
Operating instruction BC II
Programming Data maintenance Pr 2--
Check and adopt code structure Submenu
04 Confirm
Pr210 04 C 337 LI
H-
Check code structure by printing out +
shift and hold,
7
then total. The entered code is printed.
Fig. 73: Print code structure
Check code structure in display
Decimals as configured 04 C 337 L8 H-
