LTE SIB and Layer3 Messages in Detail

April 17, 2017 | Author: Manish Chaturvedi | Category: N/A
Share Embed Donate


Short Description

Download LTE SIB and Layer3 Messages in Detail...

Description

Contents SIB1 2 SIB2 4 SIB3

6

SIB6 7 ATTACH PROCEDURE IN LTE.....................................................................................................................9 Attach Request....................................................................................................................................................................10 Paging (PCCH)...................................................................................................................................................................13 RRC Connection Request (UL-CCCH)..............................................................................................................................16 RRC Connection Setup (DL-CCCH)..................................................................................................................................18 RRC Connection Setup Complete (UL-DCCH).................................................................................................................20 RRC Connection Reconfiguration (DL-DCCH) Radio Resource Configuration...............................................................29 RRC Connection Reconfiguration Complete (UL-DCCH)................................................................................................33 Attach Accept......................................................................................................................................................................34 Activate Default EPS Bearer Context Request...................................................................................................................37 Attach Complete.................................................................................................................................................................40 RRC Connection Release (DL-DCCH)..............................................................................................................................41

INTRA-LTE Handover...................................................................................................................................43 RRC Connection Reconfiguration (DL-DCCH) Handover/Mobility command................................................................44 Measurement Report...........................................................................................................................................................48

TRACKING AREA UPDATE PROCEDURE................................................................................................49 Tracking Area Update Request...........................................................................................................................................50 UL Information Transfer (UL-DCCH)...............................................................................................................................53 RRC Connection Reconfiguration (DL-DCCH)................................................................................................................54 RRC Connection Reconfiguration Complete (UL-DCCH)................................................................................................59 DL Information Transfer (DL-DCCH)...............................................................................................................................60 Tracking Area Update Accept.............................................................................................................................................61 Tracking Area Update Complete........................................................................................................................................63

RRCConnectionReestablishmentRequest.......................................................................................................64 Modify EPS Bearer Context Request.................................................................................................................................65 Modify EPS Bearer Context Accept...................................................................................................................................66 Power Control in PDSCH (Downlink)...............................................................................................................................67 Power Control in PUSCH (Uplink)....................................................................................................................................69 PRACH Power procedure...................................................................................................................................................71 Frequency Hopping in the Uplink......................................................................................................................................72 Sounding Reference Signal.................................................................................................................................................73 PUCCH format...................................................................................................................................................................74

References......................................................................................................................................................75

SIB1 MS1 System Information Block Type1 (DL-BCCH-SCH) Time : 11:35:28.953 Vendor Header Length : 47 Log Code (Hex) : 0xB0C0 HW Timestamp : (63318747.50 ms) 17:35:18.748 1.25 ms fraction : 0.00 CFN : 104 1.25 ms counter : 812210654998 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 0 Physical Cell Id : 221 E-ARFCN : 2000 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : BcchSchDownlink Message Length : 22 plmn-IdentityList PLMN-IdentityList : [0 ] : plmn-Identity mcc MCC : [0 ] : 3 [1 ] : 1 [2 ] : 0 mnc MNC : [0 ] : 4 [1 ] : 1 [2 ] : 0 cellReservedForOperatorUse : notReserved trackingAreaCode : 24838 (0x6106) cellIdentity : 118037272 (0x7091B18) cellBarred : notBarred intraFreqReselection : allowed csg-Indication : False

Order or entry-n

csg-Indication : False q-RxLevMin : -60 p-Max : 23 freqBandIndicator : 4 schedulingInfoList SchedulingInfoList : [0 ] : si-Periodicity : rf8 sib-MappingInfo

PCI of cell camped on

MCC, MNC

TAC/LAC

-60*2 = -120dBm

Max Power is 23 dBm that can be send on Uplink Frequency band 4 i.e.1710-1755

SIB-MappingInfo : [0 ] : extensionBit0 : 0 item : sibType3 [1 ] : si-Periodicity : rf64 sib-MappingInfo SIB-MappingInfo : [0 ] : extensionBit0 : 0 item : sibType5 [2 ] : si-Periodicity : rf64 sib-MappingInfo SIB-MappingInfo : [0 ] : extensionBit0 : 0 item : sibType6 si-WindowLength : ms10 systemInfoValueTag : 1 Message dump (Hex): 60 4C 42 82 16 10 67 09 1B 18 82 B5 0C 40 20 61 13 08 D8 40 AF 3A

Periodicity 8 frames or 80ms of SIB2

Schedule of other SIBs

Rf8*10ms=8 0 ms

SIB2 S1 System Information (DL-BCCH-SCH) Time : 11:35:28.953 Vendor Header Length : 57 Log Code (Hex) : 0xB0C0 HW Timestamp : (63318782.50 ms) 17:35:18.782 1.25 ms fraction : 0.00 CFN : 104 1.25 ms counter : 812210655026 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 0 Physical Cell Id : 221 E-ARFCN : 2000 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : BcchSchDownlink Message Length : 32 criticalExtensions : systemInformation-r8 systemInformation-r8 sib-TypeAndInfo : [0 ] : noName : choiceInSequence choiceInSequence : sib2 sib2 2dB power radioResourceConfigCommon Ramp rach-ConfigCommon numberOfRA-Preambles: n64 powerRampingStep : dB2 preambleInitialReceivedTargetPower : dBm-110 preambleTransMax : n10 48*1ms, ra-ResponseWindowSize : sf4 range 8 -64 mac-ContentionResolutionTimer : sf48 128*10ms=1280 ms ms maxHARQ-Msg3Tx : 4 or 1.28s, range 32 to Range 1 to 7 bcch-Config 256. Value can be modificationPeriodCoeff : n2 sent by higher layers pcch-Config as well, defaultPagingCycle : rf128 nB : oneT Determines prach-Config PO,Range 2T,T,T/2. rootSequenceIndex : 384 If small value then prach-ConfigInfo paging groups are False mean prach-ConfigIndex : 5 small in number but unrestricted set highSpeedFlag : False bigger in size, less zeroCorrelationZoneConfig : 12 Determines paging capacity prach-FreqOffset : 1 High power, Preamble format pdsch-ConfigCommon increases referenceSignalPower : 22 coverage but p-b : 1 also interference

How many sequences are available for contention based process. 64 mean no sequence is reserved for contention free.

End of RACH preamble (UL) and start of RACH response (DL) i.e.4ms

One factor in determining position of PRACH TS36.211 Position of SFN is 7. For easy detection config index 14 (SFN 0-9) can be used

One factor in determining position of PRACH.

pusch-ConfigCommon

Not intrasubframe

Integer multiple of deltaPUCCHshift, range 0 to 7, 5.4, 36.211 Determines position of 1st CCE, 10.1 36.213

Normal cyclic prefix. 2 means extended

RRC connection estb RRC Conn re-estb

Out of sync indications

0 PRBs offset

n-SB : 1 hoppingMode : interSubFrame License feature pusch-HoppingOffset : 0 enable64QAM : False Group or ul-ReferenceSignalsPUSCH sequence groupHoppingEnabled : True hopping groupAssignmentPUSCH : 0 sequenceHoppingEnabled : False Affects resource scheduling cyclicShift : 0 pucch-ConfigCommon deltaPUCCH-Shift : ds1 No of PRBs available nRB-CQI : 1 for PUCCH format, nCS-AN : 0 10.1, 36.213 n1PUCCH-AN : 16 soundingRS-UL-ConfigCommon Power in Uplink, higher SoundingRS-UL-ConfigCommon : release value increases coverage at uplinkPowerControlCommon cost of interference p0-NominalPUSCH : -103 alpha : al1 p0-NominalPUCCH : -117 Determines step size, range is deltaFList-PUCCH al(0)0 to al(1)7 deltaF-PUCCH-Format1 : deltaF0 deltaF-PUCCH-Format1b : deltaF3 TPC Command Field in deltaF-PUCCH-Format2 : deltaF0 DCI format 1A/1B/1D/1/2A/2/3 deltaF-PUCCH-Format2a : deltaF0 deltaF-PUCCH-Format2b : deltaF0 [dB]0-1102133 deltaPreambleMsg3 : 6 Range -1 to ul-CyclicPrefixLength : len1 6 (12dB) ue-TimersAndConstants t300 : ms1000 Recovery from t301 : ms1000 Physical layer t310 : ms2000 failure n310 : n20 t311 : ms3000 RRC connec n311 : n1 re-estb additionalSpectrumEmission : 1 timeAlignmentTimerCommon : sf5120 Additional req. for UE 5120*1ms=5.12s, range 500 to 10240, supervise UL sync

Applies on serving cell. Small value encourages re-select

SIB3

Max allowed power in UL

31*1= -62dB

[1 ] : noName : choiceInSequence choiceInSequence : sib3 sib3 q-Hyst : dB4 s-NonIntraSearch : 5 threshServingLow : 5 cellReselectionPriority : 5 q-RxLevMin : -57 p-Max : 23 s-IntraSearch : 31 allowedMeasBandwidth : mbw25 presenceAntennaPort1 : False threshX-High : 7 threshX-Low : 0 neighCellConfig Binary string (Bin) : 01 [0 ] : 0 [1 ] : 1 t-ReselectionEUTRA : 2

-114+5*2 = -104 -114+5*2 = -104 0 is lowest and 7 is highest priority

-57*2+1= -113 dB No of RBs 25 Two antenna ports not being used in

SIB6 System Information (DL-BCCH-SCH) Time : 10:00:14.739 Vendor Header Length : 53 Log Code (Hex) : 0xB0C0 HW Timestamp : (54013412.50 ms) 15:00:13.412 1.25 ms fraction : 0.00 CFN : 144 1.25 ms counter : 813032650730 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 0 Physical Cell Id : 463 E-ARFCN : 5815 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : BcchSchDownlink Message Length : 28 criticalExtensions : systemInformation-r8 systemInformation-r8 sib-TypeAndInfo : [0 ] : noName : choiceInSequence choiceInSequence : sib6 sib6 carrierFreqListUTRA-FDD CarrierFreqListUTRA-FDD : [0 ] : carrierFreq : 512 cellReselectionPriority : 2 threshX-High : 7 threshX-Low : 0 q-RxLevMin : -60 p-MaxUTRA : 24 q-QualMin : -20 [1 ] : carrierFreq : 662 cellReselectionPriority : 2 threshX-High : 7 threshX-Low : 0 q-RxLevMin : -60 p-MaxUTRA : 24 q-QualMin : -20 [2 ] : carrierFreq : 4438 cellReselectionPriority : 6 threshX-High : 7 threshX-Low : 0 q-RxLevMin : -60 p-MaxUTRA : 24

WDCMA carrier list

Used in Reselection toward low prority UARFCN. Higher value discourages reselection

Priority of 4438 is higher Used in Reselection toward low priority UARFCN Higher value discourages re-selection

q-QualMin : -20 [3 ] : carrierFreq : 4435 cellReselectionPriority : 3 threshX-High : 7 threshX-Low : 0 q-RxLevMin : -60 p-MaxUTRA : 24 q-QualMin : -20 t-ReselectionUTRA : 2 Message dump (Hex): 00 11 0D 08 01 1C 00 4A 22 14 B2 38 00 94 45 15 6C 70 01 28 8A 2A 6C E0 02 51 10 E2

ATTACH PROCEDURE IN LTE

Attach Request Time : 12:48:10.125 Vendor Header Length : 116 Log Code (Hex) : 0xB0ED HW Timestamp : (67678901.25 ms) 18:47:58.901 1.25 ms fraction : 0.00 CFN : 16 1.25 ms counter : 812214143121 Protocol discriminator : (7) EPS mobility management messages Security Header Type : 0 Message type : 65 NAS Key Set Identifier TSC : (0) native security context Key : 0 EPS Attach Type EPS Attach Type Value : (2) combined EPS/IMSI attach Old GUTI or IMSI Length : 11 Odd/even indication : (0) Even number of digits Type of identity : (6) Reserved plmn Mobile country code (MCC) : 310 Mobile network code (MNC) : 410 MMEGroupID : 46989 MMECode : 217 M_TMSI : 3741408592 UE Network Capability Length : 4 128EEA0 : (1) supported 128EEA1 : (1) supported 128EEA2 : (1) supported EEA3 : (0) not supported EEA4 : (0) not supported EEA5 : (0) not supported EEA6 : (0) not supported EEA7 : (0) not supported 128EIA1 : (1) supported 128EIA2 : (1) supported EIA3 : (0) not supported EIA4 : (0) not supported EIA5 : (0) not supported EIA6 : (0) not supported EIA7 : (0) not supported UEA0 : (1) supported UEA1 : (1) supported UEA2 : (0) not supported UEA3 : (0) not supported UEA4 : (0) not supported UEA5 : (0) not supported UEA6 : (0) not supported UEA7 : 0

UCS2 : The UE has a preference for the default alphabet (defined in 3GPP TS 23.038 [3]) over UCS2 (see ISO/IEC 10646 [29]). UIA1 : (1) supported UIA2 : (0) not supported UIA3 : (0) not supported UIA4 : (0) not supported UIA5 : (0) not supported UIA6 : (0) not supported UIA7 : (0) not supported SpareArray : NASMessageContainer Protocol discriminator : 2 (ESM) MessageType : PDN Connectivity Request Message Contents : 02 03 D0 11 27 17 80 80 21 10 01 00 00 10 81 06 00 00 00 00 83 06 00 00 00 00 00 0A 00 Old P-TMSI signature Value : 7774484 (Hex 0x76A114) Additional GUTI Length : 11 Odd/even indication : (0) Even number of digits Type of identity : (6) Reserved plmn Mobile country code (MCC) : 310 Mobile network code (MNC) : 410 MMEGroupID : 65328 MMECode : 4 M_TMSI : 3764936179 Last visited registered TAI plmn Mobile country code (MCC) : 310 Mobile network code (MNC) : 410 TAC : 24840 DRX parameter Split PG cycle code : (10) Value: 10 CN Specific DRX cycle length coefficient : (0) CN Specific DRX cycle length coefficient not specified Split on CCCH : (0) Split pg cycle on CCCH is not supported by the MS. Non-DRX timer : (0) No non-DRX mode after transfer state. MS Network Capability GEA/1 : (1) Encryption algorithm GEA/1 available SM capabilities via dedicated channels : (1) MS supports mobile terminated point to point SMS via dedicated signalling channels. SM capabilities via GPRS channels : (1) MS supports mobile terminated point to point SMS via GPRS packet data channels. UCS2 support : (0) The ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2. SS Screening Indicator : 1, Defined in 24.080 SoLSA Capability : (0) The ME does not support SoLSA. Revision level indicator : (1) The ME is Release '99 onwards PFC feature mode : (1) Mobile station does support BSS packet flow procedures Extended GEA bits GEA/2 : (1) Encryption algorithm GEA/2 available GEA/3 : (1) Encryption algorithm GEA/3 available GEA/4 : (0) Encryption algorithm GEA/4 not available GEA/5 : (0) Encryption algorithm GEA/5 not available GEA/6 : (0) Encryption algorithm GEA/6 not available GEA/7 : (0) Encryption algorithm GEA/7 not available LCS VA capability : (0) Location request notification via PS domain not supported

PS inter-RAT HO to UTRAN Iu mode capability : (0) PS inter-RAT HO to UTRAN Iu mode not supported Old LAI Mobile country code (MCC) : 310 Mobile network code (MNC) : 410 Location area code (LAC) : 46989 (Hex 0xB78D) Mobile Station Classmark 2 Revision level : (2) Mobile station supporting R99 or later versions of the protocol ES IND : (1) "Controlled Early Classmark Sending" option is implemented in the MS A5/1 : (0) Encryption algorithm A5/1 available RF Power Capability : (3) class 4 PS capability (pseudo-synchronization capability) : (1) PS capability present SS Screening Indicator (defined in TS 24.080) : 1 SM capability (MT SMS pt to pt capability) : (1) Mobile station supports mobile terminated point to point SMS VBS notification reception : (0) No VBS capability or no notifications wanted VGCS notification reception : (0) No VGCS capability or no notifications wanted FC Frequency Capability : (1) (GSM900 only:) The MS supports E-GSM or R-GSM CM3 : (1) The MS supports options that are indicated in classmark 3 IE LCS VA capability : (1) LCS value added location request notification capability supported UCS2 : (0) The ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2. SoLSA : (0) The ME does not support SoLSA. CMSP: CM Service Prompt : (1) "Network initiated MO CM connection request" supported for at least one CM protocol. A5/3 : (1) Encryption algorithm A5/3 available A5/2 : (0) Encryption algorithm A5/2 not available Additional Update Type Value : SMS only

Paging (PCCH) Time : 10:40:50.338 Vendor Header Length : 34 Log Code (Hex) : 0xB0C0 HW Timestamp : (56449180.00 ms) 15:40:49.180 1.25 ms fraction : 0.00 CFN : 20 1.25 ms counter : 813034599344 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 0 Physical Cell Id : 281 E-ARFCN : 5815 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : Pcch Message Length : 9 pagingRecordList PagingRecordList : [0 ] : ue-Identity PagingUE-Identity : s-TMSI s-TMSI mmec Binary string (Bin) : 00000001

[0 ] : 0 [1 ] : 0 [2 ] : 0 [3 ] : 0 [4 ] : 0 [5 ] : 0 [6 ] : 0 [7 ] : 1 m-TMSI : 11110000110111111100101000000110 [0 ] : 1 [1 ] : 1 [2 ] : 1 [3 ] : 1 [4 ] : 0 [5 ] : 0 [6 ] : 0 [7 ] : 0 [8 ] : 1 [9 ] : 1 [10] : 0 [11] : 1 [12] : 1 [13] : 1 [14] : 1 [15] : 1 [16] : 1 [17] : 1 [18] : 0 [19] : 0 [20] : 1

[21] : 0 [22] : 1 [23] : 0 [24] : 0 [25] : 0 [26] : 0 [27] : 0 [28] : 0 [29] : 1 [30] : 1 [31] : 0 cn-Domain : ps

RRC Connection Request (UL-CCCH) Time : 10:47:53.359 Vendor Header Length : 31 Log Code (Hex) : 0xB0C0 HW Timestamp : (60463368.75 ms) 16:47:43.369 1.25 ms fraction : 0.00 CFN : 128 1.25 ms counter : 812208370695 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 0 Physical Cell Id : 400 E-ARFCN : 5815 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : CcchUplink Message Length : 6 criticalExtensions : rrcConnectionRequest-r8 rrcConnectionRequest-r8 ue-Identity InitialUE-Identity : s-TMSI s-TMSI mmec Binary string (Bin) : 00000011 [0 ] : 0 [1 ] : 0 [2 ] : 0 [3 ] : 0 [4 ] : 0 [5 ] : 0 [6 ] : 1 [7 ] : 1 m-TMSI : 11110000100000010101110111111010 [0 ] : 1 [1 ] : 1 [2 ] : 1 [3 ] : 1 [4 ] : 0 [5 ] : 0 [6 ] : 0 [7 ] : 0 [8 ] : 1 [9 ] : 0 [10] : 0 [11] : 0 [12] : 0 [13] : 0 [14] : 0 [15] : 1 [16] : 0

[17] : 1 [18] : 0 [19] : 1 [20] : 1 [21] : 1 [22] : 0 [23] : 1 [24] : 1 [25] : 1 [26] : 1 [27] : 1 [28] : 1 [29] : 0 [30] : 1 [31] : 0 establishmentCause : mo-Dat

RRC Connection Setup (DL-CCCH) Time : 10:47:53.421 Vendor Header Length : 51 Log Code (Hex) : 0xB0C0 HW Timestamp : (60463433.75 ms) 16:47:43.434 1.25 ms fraction : 0.00 CFN : 24 1.25 ms counter : 812208370747 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 0 Physical Cell Id : 400 E-ARFCN : 5815 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : CcchDownlink Message Length : 26 rrc-TransactionIdentifier : 0 criticalExtensions : c1 c1 : rrcConnectionSetup-r8 rrcConnectionSetup-r8 radioResourceConfigDedicated srb-ToAddModList 1 for SRB1, SRB-ToAddModList : 2 for SRB2 [0 ] : srb-Identity : 1 rlc-Config : explicitValue explicitValue RLC-Config : am ul-AM-RLC t-PollRetransmit : ms45 pollPDU : pInfinity pollByte : kBinfinity maxRetxThreshold : t8 dl-AM-RLC t-Reordering : ms35 t-StatusProhibit : ms0 logicalChannelConfig : explicitValue explicitValue priority : 1 5 subframe. Small value prioritisedBitRate : infinity will result in high bucketSizeDuration : ms50 throughput. BSR report logicalChannelGroup : 0 Range 1 - 7 tells how much data is mac-MainConfig : explicitValue pending at UE to be explicitValue transmitted. Ref 6.1.3.1.1, maxHARQ-Tx : n4 36.321 periodicBSR-Timer : sf5 Retransmission timer 320 to 1024 retxBSR-Timer : sf320 ttiBundling : False Sync Timer timeAlignmentTimerDedicated : sf5120 Send periodic sounding reports, 10 to 100sf

Power hear room reports Offset of PDSCH is -3 TS 36.213 [23, 7.2]. TS 36.213 [23, tables 7.2.2-1A and 7.2.2-1C]. TS 36.213 [23, 7.2.21B]. Table 7.2-1c 36.213

phr-Config : setup periodicPHR-Timer : sf200 prohibitPHR-Timer : sf200 dl-PathlossChange : dB3 physicalConfigDedicated pdsch-ConfigDedicated p-a : dB-3 pusch-ConfigDedicated betaOffset-ACK-Index : 10 betaOffset-RI-Index : 9 betaOffset-CQI-Index : 10 cqi-ReportConfig cqi-ReportModeAperiodic : rm30 nomPDSCH-RS-EPRE-Offset : 0 cqi-ReportPeriodic CQI-ReportPeriodic : setup cqi-PUCCH-ResourceIndex : 0 cqi-pmi-ConfigIndex : 38 cqi-FormatIndicatorPeriodic : widebandCQI ri-ConfigIndex : 322 simultaneousAckNackAndCQI : False antennaInfo : explicitValue explicitValue transmissionMode : tm3 codebookSubsetRestriction : n2TxAntenna-tm3 n2TxAntenna-tm3 : 11 [0 ] : 1 [1 ] : 1 ue-TransmitAntennaSelection : release schedulingRequestConfig SchedulingRequestConfig : setup sr-PUCCH-ResourceIndex : 0 sr-ConfigIndex : 11 dsr-TransMax : n64

Path loss change 1,3,6 dB Table 8.6.3-1, 36.213, determines MCS offset Aperiodic reporting for CQI, PMI, RI. 3-0 means higher layer config and no PMI Offset used in CQI reporting by UE ref Table 7.2.3-0 in 36.213

9.2.4, 36.331 Physical channel configuration 5.3.10.6, 36.331

10.1 26.213, combination of ACK/NACH/DTX

10.1-5 periodicity and subframe for PUCCH, SR is sent every 10msec, No of scheduling request. Range 4n to 64n.Release of PUCCH resources if scheduling not received in time=periodicity*64n

RRC Connection Setup Complete (UL-DCCH)

25.306

Transport formats combination storage capacity

Time : 12:41:05.250 Vendor Header Length : 123 Log Code (Hex) : 0x412F HW Timestamp : (67254131.09 ms) 18:40:54.131 1.25 ms fraction : 0.88 CFN : 36 1.25 ms counter : 812213803304 Logical channel : (1) Uplink DCCH Rb_Id : 2 Message length : 107 rrc-TransactionIdentifier : 0 startList STARTList : [0 ] : cn-DomainIdentity : cs-domain start-Value : 10 (0000A hex) [1 ] : cn-DomainIdentity : ps-domain start-Value : 24 (00018 hex) ue-RadioAccessCapability pdcp-Capability losslessSRNS-RelocationSupport : False supportForRfc2507 : notSupported rlc-Capability totalRLC-AM-BufferSize : kb1000 maximumRLC-WindowSize : mws2047 maximumAM-EntityNumber : am16 transportChannelCapability dl-TransChCapability maxNoBitsReceived : b6400 maxConvCodeBitsReceived : b6400 turboDecodingSupport TurboSupport : supported supported : b6400 maxSimultaneousTransChs : e8 maxSimultaneousCCTrCH-Count : 1 maxReceivedTransportBlocks : tb32 maxNumberOfTFC : tfc128 maxNumberOfTF : tf64 ul-TransChCapability maxNoBitsTransmitted : b6400 maxConvCodeBitsTransmitted : b6400 turboEncodingSupport TurboSupport : supported supported : b6400 maxSimultaneousTransChs : e8 modeSpecificInfo : fdd maxTransmittedBlocks : tb32

Shifting of Iu signaling

Header compression not supported ROHC 25.206

2-2550 KB 2047 or 4095 3-30

Max transport channels supported CCTrCH are DCH, FACH or DSCH.

Transport blocks in a TTI=10ms

WCDMA

Location determining technique

maxNumberOfTFC : tfc64 maxNumberOfTF : tf64 rf-Capability physicalChannelCapability PDSCH is downlinkPhysChCapability like SDCCH maxNoDPCH-PDSCH-Codes : 1 Max bits in maxNoPhysChBitsReceived : b9600 a TTI supportForSF-512 : False dummy : False dummy2 SimultaneousSCCPCH-DPCH-Reception : notSupported uplinkPhysChCapability maxNoDPDCH-BitsTransmitted : b9600 dummy : False ue-MultiModeRAT-Capability TDD not multiRAT-CapabilityList supported supportOfGSM : True supportOfMulticarrier : False multiModeCapability : fdd securityCapability cipheringAlgorithmCap-spare15 : 0 cipheringAlgorithmCap-spare14 : 0 cipheringAlgorithmCap-spare13 : 0 cipheringAlgorithmCap-spare12 : 0 cipheringAlgorithmCap-spare11 : 0 cipheringAlgorithmCap-spare10 : 0 cipheringAlgorithmCap-spare9 : 0 cipheringAlgorithmCap-spare8 : 0 cipheringAlgorithmCap-spare7 : 0 cipheringAlgorithmCap-spare6 : 0 cipheringAlgorithmCap-spare5 : 0 cipheringAlgorithmCap-spare4 : 0 cipheringAlgorithmCap-spare3 : 0 cipheringAlgorithmCap-uea2 : 0 cipheringAlgorithmCap-uea1 : 1 cipheringAlgorithmCap-uea0 : 1 integrityProtectionAlgorithmCap-spare15 : 0 integrityProtectionAlgorithmCap-spare14 : 0 integrityProtectionAlgorithmCap-spare13 : 0 integrityProtectionAlgorithmCap-spare12 : 0 integrityProtectionAlgorithmCap-spare11 : 0 integrityProtectionAlgorithmCap-spare10 : 0 integrityProtectionAlgorithmCap-spare9 : 0 integrityProtectionAlgorithmCap-spare8 : 0 integrityProtectionAlgorithmCap-spare7 : 0 integrityProtectionAlgorithmCap-spare6 : 0 integrityProtectionAlgorithmCap-spare5 : 0 integrityProtectionAlgorithmCap-spare4 : 0 integrityProtectionAlgorithmCap-spare3 : 0 GPS capable. integrityProtectionAlgorithmCap-uia2 : 0 Location can be integrityProtectionAlgorithmCap-uia1 : 1 reported integrityProtectionAlgorithmCap-spare0 : 0 ue-positioning-Capability standaloneLocMethodsSupported : True ue-BasedOTDOA-Supported : False networkAssistedGPS-Supported : bothNetworkAndUE-Based UE cannot supportForUE-GPS-TimingOfCellFrames : False measure GPS supportForIPDL : False reference time

ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList : [0 ] : InterRAT-UE-RadioAccessCapability : gsm gsm-Classmark2 Revision level : (2) Mobile station supporting R99 or later versions of the protocol ES IND : (1) "Controlled Early Classmark Sending" option is implemented in the MS A5/1 : (0) Encryption algorithm A5/1 available RF Power Capability : (7) RF Power capability is irrelevant in this information element PS capability (pseudo-synchronization capability) : (1) PS capability present SS Screening Indicator (defined in TS 24.080) : 1 SM capability (MT SMS pt to pt capability) : (1) Mobile station supports mobile terminated point to point SMS VBS notification reception : (0) No VBS capability or no notifications wanted VGCS notification reception : (0) No VGCS capability or no notifications wanted FC Frequency Capability : (0) (GSM900 only:) The MS does not support E-GSM or R-GSM CM3 : (1) The MS supports options that are indicated in classmark 3 IE LCS VA capability : (1) LCS value added location request notification capability supported UCS2 : (0) The ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2. SoLSA : (0) The ME does not support SoLSA. CMSP: CM Service Prompt : (1) "Network initiated MO CM connection request" supported for at least one CM protocol. A5/3 : (1) Encryption algorithm A5/3 available A5/2 : (0) Encryption algorithm A5/2 not available gsm-Classmark3 Multiband supported : (6) E-GSM/R-GSM + GSM 1800 A5 bits A5/7 : (0) Encryption algorithm A5/7 not available A5/6 : (0) Encryption algorithm A5/6 not available A5/5 : (0) Encryption algorithm A5/5 not available A5/4 : (0) Encryption algorithm A5/4 not available Associated radio capability 2 : 1 Associated radio capability 1 : 4 R support : R-GSM not supported UCS2 treatment : (0) The ME has a preference for the default alphabet Extended measurement capability : (0) The MS does not support Extended Measurements MS Positioning Method MS assisted E-OTD : (0) not supported MS based E-OTD : (0) not supported MS assisted GPS : (1) supported MS based GPS : (1) supported Conventional GPS : (1) supported ECSD Struct Modulation capability : (1) 8-PSK supported for uplink transmission and downlink reception EDGE RF power capability (400/850/900) : (2) Power class E2 EDGE RF power capability (1800/1900) : (2) Power class E2 GSM 850 associated radio capability : 4 GSM 1900 associated radio capability : 1 UMTS FDD radio access technology capability : (1) UMTS FDD supported UMTS TDD radio access technology capability : (0) UMTS TDD not supported CDMA 2000 radio access technology capability : (0) CDMA2000 not supported DTM GPRS multislot class : (3) Multislot class 11 supported Single slot DTM : (0) Single Slot DTM not supported DTM EGPRS multislot class : (3) Multislot class 11 supported UMTS 1.28 Mcps TDD radio access technology capability : (0) UMTS 1.28 Mcps TDD not supported GERAN feature package 1 : (1) GERAN feature package 1 supported GERAN Iu mode supported : (0) GERAN Iu mode not supported

GERAN feature package 2 : (0) GERAN feature package 2 not supported GMSK multislot power profile : 3 8-PSK multislot power profile : 3 Downlink Advanced Receiver Performance : (1) Downlink Advanced Receiver Performance - phase I supported DTM Enhancements Capability : (1) The mobile station supports enhanced DTM CS establishment and enhanced DTM CS release procedures Repeated ACCH Capability : (1) The mobile station supports Repeated SACCH and Repeated Downlink FACCH rrcConnectionSetupComplete-v370ext ue-RadioAccessCapability-v370ext ue-RadioAccessCapabBandFDDList UE-RadioAccessCapabBandFDDList : [0 ] : radioFrequencyBandFDD : fdd2100 ue-PowerClass : class3 txRxFrequencySeparation : default-TxRx-separation measurementCapability compressedModeMeasCapabFDDList CompressedModeMeasCapabFDDList : [0 ] : radioFrequencyBandFDD : fdd2100 dl-MeasurementsFDD : True ul-MeasurementsFDD : True [1 ] : radioFrequencyBandFDD : fdd1900 dl-MeasurementsFDD : True ul-MeasurementsFDD : True [2 ] : radioFrequencyBandFDD : bandV dl-MeasurementsFDD : True ul-MeasurementsFDD : True [3 ] : radioFrequencyBandFDD : bandVI dl-MeasurementsFDD : True ul-MeasurementsFDD : True compressedModeMeasCapabGSMList CompressedModeMeasCapabGSMList : [0 ] : radioFrequencyBandGSM : gsm900E dl-MeasurementsGSM : True ul-MeasurementsGSM : True [1 ] : radioFrequencyBandGSM : gsm900P dl-MeasurementsGSM : True ul-MeasurementsGSM : True [2 ] : radioFrequencyBandGSM : gsm1800 dl-MeasurementsGSM : True ul-MeasurementsGSM : True [3 ] : radioFrequencyBandGSM : gsm1900 dl-MeasurementsGSM : True ul-MeasurementsGSM : True [4 ] : radioFrequencyBandGSM : gsm850 dl-MeasurementsGSM : True ul-MeasurementsGSM : True

[1 ] : radioFrequencyBandFDD : fdd1900 ue-PowerClass : class3 txRxFrequencySeparation : default-TxRx-separation measurementCapability compressedModeMeasCapabFDDList CompressedModeMeasCapabFDDList : [0 ] : radioFrequencyBandFDD : fdd2100 dl-MeasurementsFDD : True ul-MeasurementsFDD : True [1 ] : radioFrequencyBandFDD : fdd1900 dl-MeasurementsFDD : True ul-MeasurementsFDD : True [2 ] : radioFrequencyBandFDD : bandV dl-MeasurementsFDD : True ul-MeasurementsFDD : True [3 ] : radioFrequencyBandFDD : bandVI dl-MeasurementsFDD : True ul-MeasurementsFDD : True compressedModeMeasCapabGSMList CompressedModeMeasCapabGSMList : [0 ] : radioFrequencyBandGSM : gsm900E dl-MeasurementsGSM : True ul-MeasurementsGSM : True [1 ] : radioFrequencyBandGSM : gsm900P dl-MeasurementsGSM : True ul-MeasurementsGSM : True [2 ] : radioFrequencyBandGSM : gsm1800 dl-MeasurementsGSM : True ul-MeasurementsGSM : True [3 ] : radioFrequencyBandGSM : gsm1900 dl-MeasurementsGSM : True ul-MeasurementsGSM : True [4 ] : radioFrequencyBandGSM : gsm850 dl-MeasurementsGSM : True ul-MeasurementsGSM : True [2 ] : radioFrequencyBandFDD : bandV ue-PowerClass : class3 txRxFrequencySeparation : default-TxRx-separation measurementCapability compressedModeMeasCapabFDDList CompressedModeMeasCapabFDDList : [0 ] : radioFrequencyBandFDD : fdd2100 dl-MeasurementsFDD : True ul-MeasurementsFDD : True [1 ] : radioFrequencyBandFDD : fdd1900

23 dBm

dl-MeasurementsFDD : True ul-MeasurementsFDD : True [2 ] : radioFrequencyBandFDD : bandV dl-MeasurementsFDD : True ul-MeasurementsFDD : True [3 ] : radioFrequencyBandFDD : bandVI dl-MeasurementsFDD : True ul-MeasurementsFDD : True compressedModeMeasCapabGSMList CompressedModeMeasCapabGSMList : [0 ] : radioFrequencyBandGSM : gsm900E dl-MeasurementsGSM : True ul-MeasurementsGSM : True [1 ] : radioFrequencyBandGSM : gsm900P dl-MeasurementsGSM : True ul-MeasurementsGSM : True [2 ] : radioFrequencyBandGSM : gsm1800 dl-MeasurementsGSM : True ul-MeasurementsGSM : True [3 ] : radioFrequencyBandGSM : gsm1900 dl-MeasurementsGSM : True ul-MeasurementsGSM : True [4 ] : radioFrequencyBandGSM : gsm850 dl-MeasurementsGSM : True ul-MeasurementsGSM : True [3 ] : radioFrequencyBandFDD : bandVI ue-PowerClass : class3 txRxFrequencySeparation : default-TxRx-separation measurementCapability compressedModeMeasCapabFDDList CompressedModeMeasCapabFDDList : [0 ] : radioFrequencyBandFDD : fdd2100 dl-MeasurementsFDD : True ul-MeasurementsFDD : True [1 ] : radioFrequencyBandFDD : fdd1900 dl-MeasurementsFDD : True ul-MeasurementsFDD : True [2 ] : radioFrequencyBandFDD : bandV dl-MeasurementsFDD : True ul-MeasurementsFDD : True [3 ] : radioFrequencyBandFDD : bandVI dl-MeasurementsFDD : True ul-MeasurementsFDD : True compressedModeMeasCapabGSMList CompressedModeMeasCapabGSMList : [0 ] :

radioFrequencyBandGSM : gsm900E dl-MeasurementsGSM : True ul-MeasurementsGSM : True [1 ] : radioFrequencyBandGSM : gsm900P dl-MeasurementsGSM : True ul-MeasurementsGSM : True [2 ] : radioFrequencyBandGSM : gsm1800 dl-MeasurementsGSM : True ul-MeasurementsGSM : True [3 ] : radioFrequencyBandGSM : gsm1900 dl-MeasurementsGSM : True ul-MeasurementsGSM : True [4 ] : radioFrequencyBandGSM : gsm850 dl-MeasurementsGSM : True ul-MeasurementsGSM : True rrcConnectionSetupComplete-v380ext ue-RadioAccessCapability-v380ext ue-PositioningCapabilityExt-v380 rx-tx-TimeDifferenceType2Capable : False dl-PhysChCapabilityFDD-v380ext rrcConnectionSetupComplete-v3a0ext rrcConnectionSetupComplete-v680ext ue-RadioAccessCapability-v680ext multiModeRAT-Capability-v680ext rrcConnectionSetupComplete-v7e0ext ue-RadioAccessCapability supportForTwoDRXSchemesInPCH: true supportEDPDCHPowerInterpolation: true rrcConnectionSetupComplete-v3g0ext rrcConnectionSetupComplete-v4b0ext ue-RadioAccessCapability-v4b0ext pdcp-Capability-r4-ext supportForRfc3095 : notSupported rrcConnectionSetupComplete-v590ext ue-RadioAccessCapability-v590ext dl-CapabilityWithSimultaneousHS-DSCHConfig : kbps64 pdcp-Capability-r5-ext supportForRfc3095ContextRelocation : False rlc-Capability-r5-ext physicalChannelCapability fdd-hspdsch : supported hsdsch-physical-layer-category : 10 dummy : False dummy2 : False tdd384-hspdsch : unsupported tdd128-hspdsch : unsupported multiModeRAT-Capability-v590ext supportOfUTRAN-ToGERAN-NACC : True rrcConnectionSetupComplete-v5c0ext rrcConnectionSetupComplete-v690ext ue-RadioAccessCapability-v690ext physicalchannelcapability-edch fdd-edch : supported edch-PhysicalLayerCategory : 6

deviceType: doesNotBenefitFromBatteryConsumptionOptimisation ue-RadioAccessCapability-v6b0ext ue-RadioAccessCapability-v6e0ext supportForFDPCH: true ue-RadioAccessCapability-v770ext rlc-Capability supportOfTwoLogicalChannel : False physicalChannelCapability downlinkPhysChCapability hsdsch-physical-layer-category-ext : 14 enhancedFdpch: true uplinkPhysChCapability multiModeRAT-Capability ue-PositioningCapability mac-ehsSupport: true ue-RadioAccessCapability-v790ext ue-RadioAccessCapability-v860ext physicalChannelCapability downlinkPhysChCapabilityFdd multiModeRAT-Capability supportOfEUTRAFDD: doesSupportEUTRAFDD eutraFeatureGroupIndicators : 1000 [0 ] : 1 [1 ] : 0 [2 ] : 0 [3 ] : 0 ue-PositioningCapability ue-RadioAccessCapabBandFDDList3 UE-RadioAccessCapabBandFDDList3 : [0 ] : radioFrequencyBandFDD : fdd2100 measurementCapability3 compressedModeMeasCapabEUTRAList CompressedModeMeasCapabEUTRAList : [0 ] : radioFrequencyBandEUTRA : 4 compressedMode : False [1 ] : radioFrequencyBandEUTRA : 17 compressedMode : False [1 ] : radioFrequencyBandFDD : fdd1900 measurementCapability3 compressedModeMeasCapabEUTRAList CompressedModeMeasCapabEUTRAList : [0 ] : radioFrequencyBandEUTRA : 4 compressedMode : False [1 ] : radioFrequencyBandEUTRA : 17 compressedMode : False [2 ] : radioFrequencyBandFDD : bandV measurementCapability3 compressedModeMeasCapabEUTRAList CompressedModeMeasCapabEUTRAList : [0 ] : radioFrequencyBandEUTRA : 4

No need for compressed mode. UE can simultaneously do that

compressedMode : False [1 ] : radioFrequencyBandEUTRA : 17 compressedMode : False [3 ] : radioFrequencyBandFDD : bandVI measurementCapability3 compressedModeMeasCapabEUTRAList CompressedModeMeasCapabEUTRAList : [0 ] : radioFrequencyBandEUTRA : 4 compressedMode : False [1 ] : radioFrequencyBandEUTRA : 17 compressedMode : False ue-RadioAccessCapability-v880ext supportForPriorityReselectionInUTRAN: true ue-RadioAccessCapability-v890ext supportCellSpecificTxDiversityinDC-Operation: true Message dump (Hex): 4B 88 00 02 A0 00 30 32 AA D5 06 A5 56 A8 8A 48 30 44 80 01 80 01 50 0C C0 D5 D6 29 94 C0 28 09 DE CA 46 77 10 F1 A5 01 B8 42 71 CF BD E8 99 EB B6 5C A1 38 E7 DE F4 4C F5 DB 2F 50 9C 73 EF 7A 26 7A ED 97 68 4E 39 F7 BD 13 3D 76 CB CB 07 67 63 50 24 F3 01 50 CB 72 45 1A 09 00 C2 30 70 88 64 11 88 64 15 88 64 13 88 64 1A

Support for TX diversity in Dual cell

RRC Connection Reconfiguration (DL-DCCH) Radio Resource Configuration For measurement configuration, mobility control, radio resource configuration (including RBs, MAC main configuration and physical channel configuration, Power control) including any associated dedicated NAS information and security configuration. Measurement config (A1,A2,A3,A4,A5,B1,B2), SRB, DRB, MAC, Physical, CQI, scheduling request Time : 10:47:53.562 Vendor Header Length : 81 Log Code (Hex) : 0xB0C0 HW Timestamp : (60463533.75 ms) 16:47:43.534 1.25 ms fraction : 0.00 CFN : 104 1.25 ms counter : 812208370827 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 1 Physical Cell Id : 400 E-ARFCN : 5815 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : DcchDownlink Message Length : 56 rrc-TransactionIdentifier : 0 criticalExtensions : c1 c1 : rrcConnectionReconfiguration-r8 rrcConnectionReconfiguration-r8 measConfig measObjectToAddModList MeasObjectToAddModList : [0 ] : measObjectId : 1 measObject : measObjectEUTRA measObjectEUTRA carrierFreq : 5815 allowedMeasBandwidth : mbw25 presenceAntennaPort1 : False neighCellConfig Binary string (Bin) : 01 Like PBGT [0 ] : 0 in GSM [1 ] : 1 reportConfigToAddModList ReportConfigToAddModList : [0 ] : reportConfigId : 1 reportConfig : reportConfigEUTRA Value of neighbor is reportConfigEUTRA decremented by triggerType : event hysteresis. Higher No reporting value will when leaving A3 discourage A3 condition

CIO. Determines cell boundary e.g.Value is added to RSRP. Higher value will encourage HO

A3 condition must be satisfied for this duration. Range 40 to 5120ms

Value is added to RSRP. Higher value will discourage HO

eventId : eventA3 a3-Offset : 6 reportOnLeave : False hysteresis : 2 timeToTrigger : ms320 triggerQuantity : rsrp reportQuantity : both maxReportCells : 4 reportInterval : ms480 reportAmount : infinity [1 ] : reportConfigId : 2 reportConfig : reportConfigEUTRA reportConfigEUTRA triggerType : event eventId : eventA2 a2-Threshold ThresholdEUTRA : threshold-RSRP threshold-RSRP : 30 hysteresis : 2 timeToTrigger : ms640 triggerQuantity : rsrp reportQuantity : both maxReportCells : 4 reportInterval : ms480 reportAmount : infinity [2 ] : reportConfigId : 3 reportConfig : reportConfigEUTRA reportConfigEUTRA triggerType : event eventId : eventA2 a2-Threshold ThresholdEUTRA : threshold-RSRQ threshold-RSRQ : 1 hysteresis : 2 timeToTrigger : ms640 triggerQuantity : rsrq reportQuantity : both maxReportCells : 4 reportInterval : ms480 reportAmount : infinity measIdToAddModList MeasIdToAddModList : [0 ] : measId : 1 measObjectId : 1 reportConfigId : 1 [1 ] : measId : 2 measObjectId : 1 reportConfigId : 2 [2 ] : measId : 3 measObjectId : 1 reportConfigId : 3 quantityConfig quantityConfigEUTRA

Max no. of neighbors to be reported For periodical reporting, range 120 ms to 60 min Coverage based HO

30-140= -110, increase threshold to encourage A2

(1-40)/2 = 19.5 dB

List of neighbors of any technology not given

Range FC0-FC19, high value higher smoothing effect

Prohibit STATUS PDU for this time

extensionBit0 : 0 filterCoefficientRSRP : fc9 s-Measure : 0 preRegistrationInfoHRPD preRegistrationAllowed : False speedStatePars : release radioResourceConfigDedicated srb-ToAddModList SRB-ToAddModList : [0 ] : srb-Identity : 2 rlc-Config : explicitValue explicitValue RLC-Config : am ul-AM-RLC t-PollRetransmit : ms45 pollPDU : pInfinity pollByte : kBinfinity maxRetxThreshold : t8 dl-AM-RLC t-Reordering : ms35 t-StatusProhibit : ms0 logicalChannelConfig : explicitValue explicitValue priority : 3 prioritisedBitRate : infinity bucketSizeDuration : ms50 logicalChannelGroup : 0 drb-ToAddModList DRB-ToAddModList : [0 ] : eps-BearerIdentity : 5 drb-Identity : 3 pdcp-Config discardTimer : infinity statusReportRequired : False headerCompression : notUsed rlc-Config RLC-Config : am ul-AM-RLC t-PollRetransmit : ms50 pollPDU : p4 pollByte : kBinfinity maxRetxThreshold : t8 dl-AM-RLC t-Reordering : ms35 t-StatusProhibit : ms25 logicalChannelIdentity : 3 logicalChannelConfig priority : 11 prioritisedBitRate : infinity bucketSizeDuration : ms50 logicalChannelGroup : 1 mac-MainConfig : explicitValue explicitValue drx-Config DRX-Config : setup onDurationTimer : psf2

Pre-registration to CDMA2000 not allowed 3GPP default values not being used, instead are defined by EUTRAN

25KB to infinity ref 36.322

Range 5-500 ms, Timer for RLC AM. Triggers status reporting i.e. peer to peer exchange of ACK/NACK of RLC PDU reception

Receiving RLC reorders upon its expiry

Max retransmissions allowed

Status report of PDCP not required 36.323 RoHC feature can improve data rate

Affects paging, accessibility, battery ref. 57. 36.321

2 Subframes=2 ms Timer for corresponding HARQ process

drx-InactivityTimer : psf100 drx-RetransmissionTimer : psf2 longDRX-CycleStartOffset : sf40 sf40 : 1 shortDRX-Cycle : sf20 drxShortCycleTimer : 1 timeAlignmentTimerDedicated : sf5120

DRX cycle interval Uplink sync Determines nominal Power, rang from -126 to 24 dBm

physicalConfigDedicated pdsch-ConfigDedicated p-a : dB-3 uplinkPowerControlDedicated p0-UE-PUSCH : 2 deltaMCS-Enabled : en0 accumulationEnabled : false p0-UE-PUCCH : 2 pSRS-Offset : 7 cqi-ReportConfig cqi-ReportModeAperiodic : rm30 nomPDSCH-RS-EPRE-Offset : 0 cqi-ReportPeriodic CQI-ReportPeriodic : setup cqi-PUCCH-ResourceIndex : 0 cqi-pmi-ConfigIndex : 39 cqi-FormatIndicatorPeriodic : widebandCQI ri-ConfigIndex : 322 simultaneousAckNackAndCQI : False schedulingRequestConfig SchedulingRequestConfig : setup sr-PUCCH-ResourceIndex : 0 sr-ConfigIndex : 13 dsr-TransMax : n64

Power step is 7 dB

timer

Disabled, one factor to determine Power ref 5.1.1.1 of 36.213

RRC Connection Reconfiguration Complete (UL-DCCH) Time : 12:23:00.781 Vendor Header Length : 27 Log Code (Hex) : 0xB0C0 HW Timestamp : (66169633.75 ms) 18:22:49.634 1.25 ms fraction : 0.00 CFN : 24 1.25 ms counter : 812212935707 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 1 Physical Cell Id : 399 E-ARFCN : 5815 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : DcchUplink Message Length : 2 rrc-TransactionIdentifier : 0 criticalExtensions : rrcConnectionReconfigurationComplete-r8 rrcConnectionReconfigurationComplete-r8

Message dump (Hex): 10 00

Attach Accept Time : 12:23:00.781 Vendor Header Length : 152 Log Code (Hex) : 0xB0EC HW Timestamp : (66169635.00 ms) 18:22:49.635 1.25 ms fraction : 0.00 CFN : 76 1.25 ms counter : 812212935708 Protocol discriminator : (7) EPS mobility management messages Security Header Type : 0 Message type : 66 EPS Attach Result spare : 0 EPS Attach Result Value : (2) Combined EPS/IMSI attach GPRS timer Unit : (2) Value is incremented in multiples of decihours Value : (30) 180 minutes Tracking area identity list Length : 6 spare : 0 Type Of List : (0) list of TACs belonging to one PLMN, with non-consecutive TAC values Number Of Elements : 1 Elements TrackingAreaIdentity plmn Mobile country code (MCC) : 310 Mobile network code (MNC) : 410

Tracking area ID like LAC in GSM

TAC : 24834 TACValues : NASMessageContainer Protocol discriminator : 2 (ESM) MessageType : Activate Default EPS Bearer Context Request Message Contents : 52 02 C1 01 08 1D 09 62 72 6F 61 64 62 61 6E 64 06 6D 6E 63 34 31 30 06 6D 63 63 33 31 30 04 67 70 72 73 05 01 0A A5 F0 30 5D 01 00 30 10 14 92 1F 73 96 FE FE 73 2A FF FF 00 80 00 53 00 32 05 82 34 01 08 5E 04 FE FE 80 53 27 14 80 80 21 10 02 00 00 10 81 06 AC 1A 26 01 83 06 AC 1A 26 02 GUTI Length : 11 Odd/even indication : (0) Even number of digits Type of identity : (6) Reserved plmn Mobile country code (MCC) : 310 Mobile network code (MNC) : 410 MMEGroupID : 65328 MMECode : 4 M_TMSI : 3764936179 Location Area Identification Mobile country code (MCC) : 310 Mobile network code (MNC) : 410 Location area code (LAC) : 46995 (Hex 0xB793) Mobile identity Odd/even indication : (0) Even number of digits Type of identity : (4) TMSI/P-TMSI TMSI/P-TMSI : Hex 0xEC095968 Additional Update Result Value : SMS only

MS1

Activate Default EPS Bearer Context Request Time : 12:23:00.781 Vendor Header Length : 139 Log Code (Hex) : 0xB0E2 HW Timestamp : (66169636.25 ms) 18:22:49.636 1.25 ms fraction : 0.00 CFN : 136 1.25 ms counter : 812212935709 Protocol discriminator : (2) EPS session management messages EPS Bearer Identity : 5 Procedure Transaction Identity : 2 Message type : 193 EPS QoS

1(highest) to 9(lowest)

QCI : (8) QCI 8 ResourceType: Non-GBR Priority: 6 Packet Delay Budget: 300 ms Packet Error Loss Rate: 10E-6

APN

Access point name Access point name value : broadband.mnc410.mcc310.gprs PDN Address Length : 5 PDN Type : (1) IPv4 IPv4 Address : 10.165.240.48 Transaction Identifier

IP Address of the UE

TI flag : (0) The message is sent from the side that originates the TI Transaction identifier : 0 Quality of service Delay class : (2) Delay class 2 Ref 23.107, 4 means SDU error 0.0004

Reliability class : (4) Unacknowledged GTP, LLC and RLC, Protected data Greater than 2048

Peak throughput : (9) Up to 256 000 octets/s Precedence class : (2) Normal priority Mean throughput : (31) Best effort Traffic Class : (3) Interactive class

In sequence delivery

Delivery order : (2) Without delivery order ('no') Delivery of erroneous SDU : (3) Erroneous SDUs are not delivered ('no') Maximum SDU size : (150) 1500 octets Max bit rate allowed 23.401

Maximum bit rate for uplink : (254) Indicate higher than 8640 kbps Maximum bit rate for downlink : (254) Indicate higher than 8640 kbps Residual BER : (7) 1*10E-5

23.401

SDU error ratio : (3) 1*10E-3 Transfer delay : (10) 100 ms Traffic Handling priority : (2) Priority level 2

Guaranteed Bit Rate

Guaranteed bit rate for uplink : (255) 0 kbps Guaranteed bit rate for downlink : (255) 0 kbps Signalling indication : (0) Not optimized for signaling traffic

Max rate

Source statistics descriptor : (0) Spare Maximum bit rate for downlink (extended) : (128) 70 Mbps Guaranteed bit rate for downlink (extended) : (0) Use the value indicated by the 'Guaranteed bit rate for downlink' field Maximum bit rate for uplink (extended) : (83) 25 Mbps Guaranteed bit rate for uplink (extended) : (0) Use the value indicated by the 'Guaranteed bit rate for uplink' field LLC service access point identifier LLC SAPI value : (5) SAPI 5 Radio priority Radio priority level value : (2) Priority level 2

Service Access point identifier

Packet Flow Identifier Packet Flow Identifier value : (8) Dynamically assigned APN AMBR APN AMBR For Downlink : 70000 kbps APN AMBR For Uplink : 25000 kbps Protocol configuration options Configuration protocol : (0) PPP Protocol ID : [0 ] : Protocol ID : IPCP (Hex 0x8021) Contents Data string (hex) : ________&_____&_ [0 ] : 02 (_) [1 ] : 00 (_) [2 ] : 00 (_) [3 ] : 10 (_) [4 ] : 81 (_) [5 ] : 06 (_) [6 ] : AC (_) [7 ] : 1A (_) [8 ] : 26 (&) [9 ] : 01 (_) [10] : 83 (_) [11] : 06 (_) [12] : AC (_) [13] : 1A (_) [14] : 26 (&) [15] : 02 (_)

MS1

Attach Complete Time : 12:23:00.781 Vendor Header Length : 29 Log Code (Hex) : 0xB0ED HW Timestamp : (66169665.00 ms) 18:22:49.665 1.25 ms fraction : 0.00 CFN : 128 1.25 ms counter : 812212935732 Protocol discriminator : (7) EPS mobility management messages Security Header Type : 0 Message type : 67 NASMessageContainer Protocol discriminator : 2 (ESM) MessageType : Activate Default EPS Bearer Context Accept Message Contents : 52 00 C2

Refer 24.301

MS1

RRC Connection Release (DL-DCCH) Time : 08:23:31.830 Vendor Header Length : 30 Log Code (Hex) : 0xB0C0 HW Timestamp : (48211008.75 ms) 13:23:31.009 1.25 ms fraction : 0.00 CFN : 88 1.25 ms counter : 813235368807 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 1 Physical Cell Id : 468 E-ARFCN : 5755 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : DcchDownlink Message Length : 5 rrc-TransactionIdentifier : 0 criticalExtensions : c1 c1 : rrcConnectionRelease-r8 rrcConnectionRelease-r8 releaseCause : other redirectedCarrierInfo RedirectedCarrierInfo : utra-FDD utra-FDD : 4435

Cause of RRC release

Redirect to WDCMA UARFCN 4435

INTRA-LTE Handover

MS1

RRC Connection Reconfiguration (DL-DCCH) Handover/Mobility command Time : 10:43:26.618 Vendor Header Length : 83 Log Code (Hex) : 0xB0C0 HW Timestamp : (56605422.50 ms) 15:43:25.422 1.25 ms fraction : 0.00 CFN : 16 1.25 ms counter : 813034724338 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 1 Physical Cell Id : 364 E-ARFCN : 5815 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : DcchDownlink Message Length : 58 rrc-TransactionIdentifier : 0 criticalExtensions : c1 c1 : rrcConnectionReconfiguration-r8 rrcConnectionReconfiguration-r8 mobilityControlInfo targetPhysCellId : 281 carrierBandwidth dl-Bandwidth : n25 additionalSpectrumEmission : 1 t304 : ms1000 newUE-Identity Binary string (Bin) : 0100000010011000 [0 ] : 0 [1 ] : 1 [2 ] : 0 [3 ] : 0 [4 ] : 0 [5 ] : 0 [6 ] : 0 [7 ] : 0 [8 ] : 1 [9 ] : 0 [10] : 0 [11] : 1 [12] : 1 [13] : 0 [14] : 0 [15] : 0 radioResourceConfigCommon rach-ConfigCommon numberOfRA-Preambles : n64

Handover command to target cell

C=RNTI for the UE

powerRampingStep : dB2 preambleInitialReceivedTargetPower : dBm-110 preambleTransMax : n10 ra-ResponseWindowSize : sf4 mac-ContentionResolutionTimer : sf48 maxHARQ-Msg3Tx : 4 prach-Config rootSequenceIndex : 384 prach-ConfigInfo prach-ConfigIndex : 4 highSpeedFlag : False zeroCorrelationZoneConfig : 12 prach-FreqOffset : 1 pdsch-ConfigCommon referenceSignalPower : 22 p-b : 1 pusch-ConfigCommon n-SB : 1 hoppingMode : interSubFrame pusch-HoppingOffset : 0 enable64QAM : False ul-ReferenceSignalsPUSCH groupHoppingEnabled : True groupAssignmentPUSCH : 0 sequenceHoppingEnabled : False cyclicShift : 0 phich-Config phich-Duration : normal phich-Resource : one pucch-ConfigCommon deltaPUCCH-Shift : ds1 nRB-CQI : 1 nCS-AN : 0 n1PUCCH-AN : 16 soundingRS-UL-ConfigCommon SoundingRS-UL-ConfigCommon : release uplinkPowerControlCommon p0-NominalPUSCH : -103 alpha : al1 p0-NominalPUCCH : -117 deltaFList-PUCCH deltaF-PUCCH-Format1 : deltaF0 deltaF-PUCCH-Format1b : deltaF3 deltaF-PUCCH-Format2 : deltaF0 deltaF-PUCCH-Format2a : deltaF0 deltaF-PUCCH-Format2b : deltaF0 deltaPreambleMsg3 : 6 antennaInfoCommon antennaPortsCount : an2 p-Max : 23 ul-CyclicPrefixLength : len1 radioResourceConfigDedicated srb-ToAddModList SRB-ToAddModList : [0 ] : srb-Identity : 1 rlc-Config : explicitValue explicitValue

No of transmit antenna ports

RLC-Config : am ul-AM-RLC t-PollRetransmit : ms45 pollPDU : pInfinity pollByte : kBinfinity maxRetxThreshold : t32 dl-AM-RLC t-Reordering : ms35 t-StatusProhibit : ms0 logicalChannelConfig : explicitValue explicitValue priority : 1 prioritisedBitRate : infinity bucketSizeDuration : ms50 logicalChannelGroup : 0 [1 ] : srb-Identity : 2 rlc-Config : explicitValue explicitValue RLC-Config : am ul-AM-RLC t-PollRetransmit : ms45 pollPDU : pInfinity pollByte : kBinfinity maxRetxThreshold : t32 dl-AM-RLC t-Reordering : ms35 t-StatusProhibit : ms0 logicalChannelConfig : explicitValue explicitValue priority : 3 prioritisedBitRate : infinity bucketSizeDuration : ms50 logicalChannelGroup : 0 mac-MainConfig : explicitValue explicitValue drx-Config DRX-Config : setup onDurationTimer : psf5 drx-InactivityTimer : psf100 drx-RetransmissionTimer : psf2 longDRX-CycleStartOffset : sf320 sf320 : 2 shortDRX-Cycle : sf20 drxShortCycleTimer : 16 timeAlignmentTimerDedicated : sf5120 physicalConfigDedicated pdsch-ConfigDedicated p-a : dB-3 cqi-ReportConfig cqi-ReportModeAperiodic : rm30 nomPDSCH-RS-EPRE-Offset : 0 cqi-ReportPeriodic CQI-ReportPeriodic : setup cqi-PUCCH-ResourceIndex : 0 cqi-pmi-ConfigIndex : 39 cqi-FormatIndicatorPeriodic : widebandCQI ri-ConfigIndex : 322

simultaneousAckNackAndCQI : False schedulingRequestConfig SchedulingRequestConfig : setup sr-PUCCH-ResourceIndex : 0 sr-ConfigIndex : 13 dsr-TransMax : n64 securityConfigHO handoverType : intraLTE keyChangeIndicator : False nextHopChainingCount : 7

Measurement Report Time : 10:02:16.482 Vendor Header Length : 33 Log Code (Hex) : 0xB0C0 HW Timestamp : (54135332.50 ms) 15:02:15.332 1.25 ms fraction : 0.00 CFN : 116 1.25 ms counter : 813032748266 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 1 Physical Cell Id : 452 E-ARFCN : 5815 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : DcchUplink Message Length : 8 criticalExtensions : c1 c1 : measurementReport-r8 measurementReport-r8 measResults measId : 4 rsrpResult : 40 rsrqResult : 12 measResultNeighCells : measResultListEUTRA measResultListEUTRA MeasResultListEUTRA : [0 ] : physCellId : 221 rsrpResult : 43 rsrqResult : 19 Message dump (Hex): 08 11 A8 30 03 75 AB 4C

Serving cell

40-140= -100 dBm (12-40)/2 = -14

Only 1 neighbor reported

43-140 = -97 dBm (19-40)/2 = -10.5

TRACKING AREA UPDATE PROCEDURE

Tracking Area Update Request TAC update reference 5.5.3.2 24.301 Time : 11:58:47.452 Vendor Header Length : 93 Log Code (Hex) : 0xB0ED HW Timestamp : (61126057.50 ms) 16:58:46.058 1.25 ms fraction : 0.00 CFN : 176 1.25 ms counter : 813245700846 Protocol discriminator : (7) EPS mobility management messages Security Header Type : 0 Message type : 72 NAS Key Set Identifier TSC : (0) native security context Key : 0 EPS Update Type Active Flag : (0) No bearer establishment requested EPS update type Value : (2) combined TA/LA updating with IMSI attach GUTI Length : 11 Odd/even indication : (0) Even number of digits Type of identity : (6) Reserved plmn Mobile country code (MCC) : 310 Mobile network code (MNC) : 410 MMEGroupID : 46997 MMECode : 243 M_TMSI : 3439418705 Ciphering key sequence number Key sequence : (1) 1 P-TMSI signature Value : 10086439 (Hex 0x99E827) GUTI Length : 11 Odd/even indication : (0) Even number of digits Type of identity : (6) Reserved plmn Mobile country code (MCC) : 310 Mobile network code (MNC) : 410 MMEGroupID : 65328 Current MMECode : 4 TMSI being M_TMSI : 3770899819 notified NonceUE NonceValue : 3068082419 UE Network Capability Length : 4 128EEA0 : (1) supported 128EEA1 : (1) supported 128EEA2 : (1) supported EEA3 : (0) not supported

EEA4 : (0) not supported EEA5 : (0) not supported EEA6 : (0) not supported EEA7 : (0) not supported 128EIA1 : (1) supported 128EIA2 : (1) supported EIA3 : (0) not supported EIA4 : (0) not supported EIA5 : (0) not supported EIA6 : (0) not supported EIA7 : (0) not supported UEA0 : (1) supported UEA1 : (1) supported UEA2 : (0) not supported UEA3 : (0) not supported UEA4 : (0) not supported UEA5 : (0) not supported UEA6 : (0) not supported UEA7 : 0 UCS2 : The UE has a preference for the default alphabet (defined in 3GPP TS 23.038 [3]) over UCS2 (see ISO/IEC 10646 [29]). UIA1 : (1) supported UIA2 : (0) not supported UIA3 : (0) not supported UIA4 : (0) not supported UIA5 : (0) not supported UIA6 : (0) not supported UIA7 : (0) not supported SpareArray : TrackingAreaIdentity Old TAC plmn Mobile country code (MCC) : 310 Mobile network code (MNC) : 410 TAC : 24832 EPS Bearer Context Status EBI5 : Inactive EBI6 : Inactive EBI7 : Inactive EBI8 : Inactive EBI9 : Inactive EBI10 : Inactive EBI11 : Inactive EBI12 : Inactive EBI13 : Inactive EBI14 : Inactive EBI15 : Inactive MS Network Capability GEA/1 : (1) Encryption algorithm GEA/1 available SM capabilities via dedicated channels : (1) MS supports mobile terminated point to point SMS via dedicated signalling channels. SM capabilities via GPRS channels : (1) MS supports mobile terminated point to point SMS via GPRS packet data channels. UCS2 support : (0) The ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2. SS Screening Indicator : 1, Defined in 24.080 SoLSA Capability : (0) The ME does not support SoLSA. Revision level indicator : (1) The ME is Release '99 onwards PFC feature mode : (1) Mobile station does support BSS packet flow procedures

Extended GEA bits GEA/2 : (1) Encryption algorithm GEA/2 available GEA/3 : (1) Encryption algorithm GEA/3 available GEA/4 : (0) Encryption algorithm GEA/4 not available GEA/5 : (0) Encryption algorithm GEA/5 not available GEA/6 : (0) Encryption algorithm GEA/6 not available GEA/7 : (0) Encryption algorithm GEA/7 not available LCS VA capability : (0) Location request notification via PS domain not supported PS inter-RAT HO to UTRAN Iu mode capability : (0) PS inter-RAT HO to UTRAN Iu mode not supported Location Area Identification New Mobile country code (MCC) : 310 TAC/LAC Mobile network code (MNC) : 410 Location area code (LAC) : 46997 (Hex 0xB795) Mobile Station Classmark 2 Revision level : (2) Mobile station supporting R99 or later versions of the protocol ES IND : (1) "Controlled Early Classmark Sending" option is implemented in the MS A5/1 : (0) Encryption algorithm A5/1 available RF Power Capability : (3) class 4 PS capability (pseudo-synchronization capability) : (1) PS capability present SS Screening Indicator (defined in TS 24.080) : 1 SM capability (MT SMS pt to pt capability) : (1) Mobile station supports mobile terminated point to point SMS VBS notification reception : (0) No VBS capability or no notifications wanted VGCS notification reception : (0) No VGCS capability or no notifications wanted FC Frequency Capability : (1) (GSM900 only:) The MS supports E-GSM or R-GSM CM3 : (1) The MS supports options that are indicated in classmark 3 IE LCS VA capability : (1) LCS value added location request notification capability supported UCS2 : (0) The ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2. SoLSA : (0) The ME does not support SoLSA. CMSP: CM Service Prompt : (1) "Network initiated MO CM connection request" supported for at least one CM protocol. A5/3 : (1) Encryption algorithm A5/3 available A5/2 : (0) Encryption algorithm A5/2 not available Additional Update Type Value : SMS only

UL Information Transfer (UL-DCCH) The ULInformationTransfer message is used for the uplink transfer of dedicated NAS information. Time : 11:29:28.810 Vendor Header Length : 85 Log Code (Hex) : 0xB0C0 HW Timestamp : (59367758.75 ms) 16:29:27.759 1.25 ms fraction : 0.00 CFN : 128 1.25 ms counter : 813036934207 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 2 Physical Cell Id : 332 E-ARFCN : 5815 System Frame Number EPS mobility System frame number : N/A management message Sub frame number : N/A 24.007 Message Type : DcchUplink Message Length : 60 criticalExtensions : c1 c1 : ulInformationTransfer-r8 ulInformationTransfer-r8 EPS mobility dedicatedInfoType : dedicatedInfoNAS Management Message dedicatedInfoNAS Protocol discriminator: 7 (EMM) MessageType : Tracking Area Update Request Message Contents : 17 48 01 0B F6 13 00 14 FF 30 03 F0 C3 5D CF 58 04 E0 E0 C0 40 52 13 00 14 61 04 5C 0A 00 57 02 20 00 31 03 E5 E0 04 13 13 00 14 B7 96 11 03 53 59 A6 F1

RRC Connection Reconfiguration (DL-DCCH) Time : 11:29:28.819 Vendor Header Length : 72 Log Code (Hex) : 0xB0C0 HW Timestamp : (59367766.25 ms) 16:29:27.766 1.25 ms fraction : 0.00 CFN : 48 1.25 ms counter : 813036934213 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 1 Physical Cell Id : 332 E-ARFCN : 5815 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : DcchDownlink Message Length : 47 rrc-TransactionIdentifier : 1 criticalExtensions : c1 c1 : rrcConnectionReconfiguration-r8 rrcConnectionReconfiguration-r8 measConfig measObjectToRemoveList MeasObjectToRemoveList :

[0 ] : 1 measObjectToAddModList MeasObjectToAddModList : [0 ] : measObjectId : 1 measObject : measObjectEUTRA measObjectEUTRA carrierFreq : 5815 allowedMeasBandwidth : mbw25 presenceAntennaPort1 : False neighCellConfig Binary string (Bin) : 01 [0 ] : 0 [1 ] : 1 reportConfigToRemoveList ReportConfigToRemoveList : [0 ] : 1 [1 ] : 2 [2 ] : 3 reportConfigToAddModList ReportConfigToAddModList : [0 ] : reportConfigId : 1 reportConfig : reportConfigEUTRA reportConfigEUTRA triggerType : event eventId : eventA3 a3-Offset : 6 reportOnLeave : False hysteresis : 2

timeToTrigger : ms320 triggerQuantity : rsrp reportQuantity : both maxReportCells : 4 reportInterval : ms480 reportAmount : infinity [1 ] : reportConfigId : 2 reportConfig : reportConfigEUTRA reportConfigEUTRA triggerType : event eventId : eventA2 a2-Threshold ThresholdEUTRA : threshold-RSRP threshold-RSRP : 30 hysteresis : 2 timeToTrigger : ms640 triggerQuantity : rsrp reportQuantity : both maxReportCells : 4 reportInterval : ms480 reportAmount : infinity [2 ] : reportConfigId : 3 reportConfig : reportConfigEUTRA reportConfigEUTRA triggerType : event eventId : eventA2 a2-Threshold ThresholdEUTRA : threshold-RSRQ

threshold-RSRQ : 1 hysteresis : 2 timeToTrigger : ms640 triggerQuantity : rsrq reportQuantity : both maxReportCells : 4 reportInterval : ms480 reportAmount : infinity [3 ] : reportConfigId : 4 reportConfig : reportConfigEUTRA reportConfigEUTRA triggerType : event eventId : eventA3 a3-Offset : 0 reportOnLeave : False hysteresis : 2 timeToTrigger : ms320 triggerQuantity : rsrp reportQuantity : both maxReportCells : 4 reportInterval : ms480 reportAmount : r1 measIdToRemoveList MeasIdToRemoveList : [0 ] : 1 [1 ] : 2 [2 ] : 3 measIdToAddModList MeasIdToAddModList :

[0 ] : measId : 1 measObjectId : 1 reportConfigId : 1 [1 ] : measId : 2 measObjectId : 1 reportConfigId : 2 [2 ] : measId : 3 measObjectId : 1 reportConfigId : 3 [3 ] : measId : 4 measObjectId : 1 reportConfigId : 4 quantityConfig quantityConfigEUTRA extensionBit0 : 0 filterCoefficientRSRP : fc9 s-Measure : 0 preRegistrationInfoHRPD preRegistrationAllowed : False speedStatePars : release

RRC Connection Reconfiguration Complete (UL-DCCH) Time : 11:29:28.820 Vendor Header Length : 27 Log Code (Hex) : 0xB0C0 HW Timestamp : (59367767.50 ms) 16:29:27.768 1.25 ms fraction : 0.00 CFN : 172 1.25 ms counter : 813036934214 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 1 Physical Cell Id : 332 E-ARFCN : 5815 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : DcchUplink Message Length : 2 rrc-TransactionIdentifier : 1 criticalExtensions : rrcConnectionReconfigurationComplete-r8 rrcConnectionReconfigurationComplete-r8

DL Information Transfer (DL-DCCH) The DLInformationTransfer message is used for the downlink transfer of dedicated NAS information Time : 11:29:29.075 Vendor Header Length : 65 Log Code (Hex) : 0xB0C0 HW Timestamp : (59368013.75 ms) 16:29:28.014 1.25 ms fraction : 0.00 CFN : 120 1.25 ms counter : 813036934411 RRC Signaling Header Log Packet Version : 1 RRC Release Number : 8.7.0 Radio Bearer Id : 2 Physical Cell Id : 332 E-ARFCN : 5815 System Frame Number System frame number : N/A Sub frame number : N/A Message Type : DcchDownlink Message Length : 40 rrc-TransactionIdentifier : 0 criticalExtensions : c1 c1 : dlInformationTransfer-r8 dlInformationTransfer-r8 dedicatedInfoType : dedicatedInfoNAS dedicatedInfoNAS Protocol discriminator : 7 (EMM) MessageType : Unknown (Ciphered)

NAS message

Message Contents : 27 8A E0 B7 86 04 B3 9E 3C 30 A1 5A 2E 9D 66 A2 CE 4E 85 1D B9 1B A0 3B 24 56 34 CB 2C B2 BE 8C 35 E4 0C 4D AC

Tracking Area Update Accept Time : 11:29:29.076 Vendor Header Length : 47 Log Code (Hex) : 0xB0EC HW Timestamp : (59368016.25 ms) 16:29:28.016 1.25 ms fraction : 0.00 CFN : 60 1.25 ms counter : 813036934413 Protocol discriminator : (7) EPS mobility management messages Security Header Type : 0 Message type : 73 EPS Update Result spare : 0 EPS Update Result Value : (1) combined TA/LA updated GPRS timer Unit : (2) Value is incremented in multiples of decihours Value : (30) 180 minutes Tracking area identity list Length : 6 spare : 0 Type Of List : (0) list of TACs belonging to one PLMN, with non-consecutive TAC values Number Of Elements : 1 Elements TrackingAreaIdentity plmn Mobile country code (MCC) : 310

Mobile network code (MNC) : 410 TAC : 24841 TACValues : EPS Bearer Context Status EBI5 : Active EBI6 : Inactive EBI7 : Inactive EBI8 : Inactive EBI9 : Inactive EBI10 : Inactive EBI11 : Inactive EBI12 : Inactive EBI13 : Inactive EBI14 : Inactive EBI15 : Inactive Location Area Identification Mobile country code (MCC) : 310 Mobile network code (MNC) : 410 Location area code (LAC) : 46990 (Hex 0xB78E) Mobile identity Odd/even indication : (0) Even number of digits Type of identity : (4) TMSI/P-TMSI TMSI/P-TMSI : Hex 0xF0E46C2E Additional Update Result Value : SMS only

MS1

Tracking Area Update Complete Time : 11:29:29.077 Vendor Header Length : 24 Log Code (Hex) : 0xB0ED HW Timestamp : (59368021.25 ms) 16:29:28.021 1.25 ms fraction : 0.00 CFN : 16 1.25 ms counter : 813036934417 Protocol discriminator : (7) EPS mobility management messages Security Header Type : 0 Message type : 74

RRCConnectionReestablishmentRequest This message is sent after Hanover failure, reconfiguration failure and other failures UL-CCCH-Message message c1 rrcConnectionReestablishmentRequest criticalExtensions rrcConnectionReestablishmentRequest-r8 ue-Identity c-RNTI Bin : 4C F0 (= 19696) physCellId : 30 shortMAC-I Bin : AB 7D (= 43901) reestablishmentCause : otherFailure

There are three causes 1. Other (RF is on sub cause 2. Handover failure 3. Reconfiguration failure

MS1

Modify EPS Bearer Context Request Time : 12:01:59.342 Vendor Header Length : 25 Log Code (Hex) : 0xB0E2 HW Timestamp : (61318410.00 ms) 17:01:58.410 1.25 ms fraction : 0.00 CFN : 8 1.25 ms counter : 813038494728 Protocol discriminator : (2) EPS session management messages EPS Bearer Identity : 5 Procedure Transaction Identity : 0 Message type : 201 APN AMBR APN AMBR For Downlink : 70000 kbps APN AMBR For Uplink : 25000 kbps

MS1

Modify EPS Bearer Context Accept Time : 12:01:59.343 Vendor Header Length : 25 Log Code (Hex) : 0xB0E3 HW Timestamp : (61318411.25 ms) 17:01:58.411 1.25 ms fraction : 0.00 CFN : 144 1.25 ms counter : 813038494729 Protocol discriminator : (2) EPS session management messages EPS Bearer Identity : 5 Procedure Transaction Identity : 0 Message type : 202

Power Control in PDSCH (Downlink) 

PDSCH Power is determined in the following manner o If RS is not present in the RB of PDSCH, offset from RS power is defined by Pa, which is UE specific offset. Pa is signaled by higher layers and is changes every 1ms, values are -6 to 3 dB. o If RS is present then Pb and antennaPortsCount together will determine the offset. It is cell specific and changes only when there is change in system message

IE/Variables Pa -6dB -4.77 -3 -1.77 0 1 2 3

Pb

One Anten na

0

1

One Anten na Ratio 1

1

5-Apr

0.8

2

5-Mar

0.6

3

5-Feb

0.4

One Anten na Offset 0 0.969 1 2.218 49 3.979 4

Two and Four Anten na Ports

Two and Four Anten na Ports Offset 0.9691

4-May

Two and Four Antenna Ports Ratio 1.25

1

1

4-Mar

0.75

0 1.2493 9

2-Jan

0.5

3.0103

Source of IE   

antennaPortsCount RRC connection reconfiguration p-b SIB2, RRC connection reconfiguration p-a RRC connection setup

Power Control in PUSCH (Uplink)

IE/Variables  

 

Power control is calculated every subframe i Pcmax = min(p-Max,Pumax), Pcmax is max UE power o p-Max 23 dBm o PuMax  MPR (max power reduction) table 6.2.4-1 36.101  additionalSpectrumEmission =1 them MPR =0dB Mpusch= ul_Bandwidth range n6 to n100, represent the UL RB allocated Po_pusch o p0-NominalPUSCH(j) -103dBm,  for j not equal to 2 it is p0-NominalPUSCH =  for j=2, p0-NominalPUSCH is =P0_pre + deltaPreambleMsg3  P0_pre range=preambleInitialReceivedTargetPower range -120 to -90  deltaPreambleMsg3 range -1(-2dB) to 6(12dB) o P0_ue_pusch_(j), range -8 to 7dB, where j=0 represents semi-persistent scheduling and j=1 represents dynamic scheduling,  j=2 represent retransmission of RACH response. P0_ue_pusch_(2)=0dB 

 

 

Alpha range 0,0.4,0.5,0.6,0.7,0.8,0.9,1.0. It is used as path loss compensation factor as a trade-off between total uplink capacity and cell edge-data rate. Higher value will be good for cell edge user but not for the overall capacity due to high uplink power PL = referenceSignalPower – higher layer filtered RSRP o referenceSignalPower 22 dBm o FilterRsrp value will also affect PL PUSCH  TF (i )  10 log10 ((2 MPR K S  1)  offset )

 TF (i )  10 log10 ((2 o o o

MPR K S

= 0 if Ks = 0

)

if Ks=1.25 Ks=deltaMCS-Enabled, e.g. en0=disable PUSCH CQI  offset   offset

betaOffset-CQI-Index : 10 =2.875

MPR  OCQI / N RE 

for control data sent via PUSCH without UL-SCH data Qcqi=no of CQI bits including CRC bits

C 1

o

 1) 

PUSCH offset

K

r

/ N RE

MPR= r  0 for control data sent via PUSCH with UL-SCH data  C=number of code blocks  Kr =size of code blocks  Nre= No. of resource elements

f (i )  f (i  1)  

(i  K

)



PUSCH PUSCH F(i)=Delta o Accumulative -1,0,1,3 dB refer 5.1.1.1-2, 36.213 o Absolute Delta -4,-1,1,4 dB



Pcmax o p-Max  SIB1 o PuMax RRCConnectionSetupComplete  additionalSpectrumEmissionSIB2  Mpusch RIV DCI format0 Type2 +UE RNTI PDCCH(no of symbols in PDCCH PCFICH o ul_Bandwidth SIB2 o Po_pusch o p0-NominalPUSCHpusch-ConfigCommon SIB2 o p0-NominalPUSCH  RRC Connection Reconfiguration  P0_pre range=preambleInitialReceivedTargetPower SIB2  deltaPreambleMsg3 pusch-ConfigCommon SIB2 o P0_ue_pusch_(j)  uplinkPowerControlDedicated RRC Connection Reconfiguration  J  semiPersistSchedC-RNTI SPS-Config RRC Connection Reconfiguration Alpha uplinkPowerControlCommon SIB2 PL o referenceSignalPower pdsch-ConfigCommon SIB2

Source of IE





  

PUSCH  TF (i )  10 log10 ((2 MPR K S  1)  offset )

o o

Ks=deltaMCS-Enabled uplinkPowerControlDedicated RRC Connection Reconfiguration PUSCH CQI  offset   offset



F(i)=Delta format0/3PDCCH



F(i)=Delta 3APDCCH



betaOffset-CQI-Index pusch-ConfigDedicated RRC Connection setup

f (i )  f (i  1)   PUSCH (i  K PUSCH )

TPC C-RNTI or SPS C-RNTI +DCI

f (i )  f (i  1)   PUSCH (i  K PUSCH ) TPC TPC-PUSCH-RNTI +DCI format

PUCCH Power procedure The PUCCH carries the ACK/NACK information, CQIs, and schedule request (SR) information related to downlink data



(i) is the subframe number



CMAX

  

Delta PUCCH, compensation factor for different PUCCH formats G(i) closed loop power adjustment

P is the maximum transmit power of the UE. P0 _ PUCCH is the receive power expected by the eNodeB.

PRACH Power procedure

PPRACH = min{ PCMAX , PREAMBLE_RECEIVED_TARGET_POWER + PL}_[dBm], preambleInitialReceivedTargetPower + DELTA_PREAMBLE + (PREAMBLE_TRANSMISSION_COUNTER – 1) * powerRampingStep;

IE/Variables 

  

Pcmax = min(p-Max,Pumax), Pcmax is max UE power o p-Max 23 dBm o PuMax  MPR (max power reduction) table 6.2.4-1 36.101  additionalSpectrumEmission =1 then MPR =0dB preambleInitialReceivedTargetPower -110dBm PL = referenceSignalPower – higher layer filtered RSRP o referenceSignalPower 22 dBm powerRampingStep 2dB

Source of IE 

  

Pcmax o p-Max  SIB1 o PuMax RRCConnectionSetupComplete  additionalSpectrumEmissionSIB2 preambleInitialReceivedTargetPower SIB2 PL o referenceSignalPower pdsch-ConfigCommon SIB2 powerRampingStep  rach-ConfigCommonSIB2

Frequency Hopping in the Uplink IE/Variables  

pusch-hoppingOffset: offset is in terms of RBs hoppingMode, Hopping bits are  Type1: 00,01,10, follows one pattern only 

Type2: 11 specific hopping pattern, random based on subband, offset and mirror function. Unique to the cell

Source of IE   

hoppingMode  pusch-ConfigCommon SIB2 Hopping bits Resource block assignment and hopping resource allocation DCI format0 +UE RNTI PDCCH(no of symbols in PDCCH PCFICH pusch-hoppingOffset pusch-ConfigCommon SIB2

Sounding Reference Signal | | | | | | | |

| | | | | | | |

+-soundingRS-UL-ConfigCommon ::= CHOICE [setup] | +-setup ::= SEQUENCE [0] | +-srs-BandwidthConfig ::= ENUMERATED [bw2] | +-srs-SubframeConfig ::= ENUMERATED [sc0] | +-ackNackSRS-SimultaneousTransmission ::= BOOLEAN [TRUE] | +-srs-MaxUpPts ::= ENUMERATED OPTIONAL:Omit +-uplinkPowerControlCommon ::= SEQUENCE +-ul-CyclicPrefixLength ::= ENUMERATED [len1]

| | | | | | | | | | |

+-soundingRS-UL-ConfigDedicated ::= CHOICE [setup] OPTIONAL:Exist | +-setup ::= SEQUENCE | +-srs-Bandwidth ::= ENUMERATED [bw0] | +-srs-HoppingBandwidth ::= ENUMERATED [hbw0] | +-freqDomainPosition ::= INTEGER (0..23) [0] | +-duration ::= BOOLEAN [FALSE] | +-srs-ConfigIndex ::= INTEGER (0..1023) [0] | +-transmissionComb ::= INTEGER (0..1) [0] | +-cyclicShift ::= ENUMERATED [cs0] +-antennaInfo ::= CHOICE [explicitValue] OPTIONAL:Exist +-schedulingRequestConfig ::= CHOICE OPTIONAL:Omit

srs-HoppingBandwidth >= srs-Bandwidth : SRS Hopping OFF srs-HoppingBandwidth < srs-Bandwidth : SRS Hopping ON

Buffer Status ReportUCIPUCCH

Both variables determine Nrb for SRS 5.5.3.2.1 of 36.213

Tranmission on subframe 5.5.3.3-1

Periodicity of SRS transmission in table 8.2-1, 36.213

PUCCH format

nCS-an

References          

36.331 Radio Resource Control (RRC) 36.213 Physical layer procedures 36.211 Physical Channels and Modulation 25.304 User Equipment (UE) procedures in idle mode and procedures for cell reselection in connected mode 23.401 General Packet Radio Service (GPRS) enhancements for Evolved Universal Terrestrial Radio Access Network (E-UTRAN) access 24.301 Non-Access-Stratum (NAS) protocol for Evolved Packet System (EPS) 24.007 Mobile radio interface signalling layer 3 36.508 User Equipment (UE) conformance testing 36.101 User Equipment (UE) radio transmission and reception http://www.3gpp.org/ftp/Specs/html-info/36-series.htm

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF