Lorentz Psk2

PSk2-7 C-SJ17-9 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 80 m max. 25 m³/h

Technical Data Controller PSk2-7 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 8,0 kW max. 850 V > 575 V max. 13 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 5.5kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...51 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 905 rpm 0,88 F IP68 max. 300 m

Pump End PE C-SJ17-9 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-7 C-SJ17-9 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-7 C-SJ17-9 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 580 mm 750 mm 830 mm 143 mm 133 mm 2,5 in

Net weight Controller

18 kg

Pump Unit

65 kg

Motor

48 kg

Pump End

17 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-7 C-SJ30-6 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 50 m max. 42 m³/h

Technical Data Controller PSk2-7 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 8,0 kW max. 850 V > 575 V max. 13 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 5.5kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...51 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 905 rpm 0,88 F IP68 max. 300 m

Pump End PE C-SJ30-6 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-7 C-SJ30-6 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-7 C-SJ30-6 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 610 mm 750 mm 860 mm 143 mm 133 mm 3 in

Net weight Controller

18 kg

Pump Unit

64 kg

Motor

48 kg

Pump End

16 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-7 C-SJ42-3 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 30 m max. 76 m³/h

Technical Data Controller PSk2-7 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 8,0 kW max. 850 V > 575 V max. 13 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 5.5kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...52 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 965 rpm 0,88 F IP68 max. 300 m

Pump End PE C-SJ42-3 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-7 C-SJ42-3 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-7 C-SJ42-3 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 354 mm 750 mm 604 mm 143 mm 147 mm 3 in

Net weight Controller

18 kg

Pump Unit

61 kg

Motor

48 kg

Pump End

13 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-7 C-SJ95-1 Solar Submersible Pump System for 8" wells System Overview Head Flow rate

max. 16 m max. 128 m³/h

Technical Data Controller PSk2-7 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 8,0 kW max. 850 V > 575 V max. 13 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 5.5kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...54 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...3 080 rpm 0,88 F IP68 max. 300 m

Pump End PE C-SJ95-1 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-7 C-SJ95-1 (Motor, Pump End) Borehole diameter Water temperature

min. 8,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-7 C-SJ95-1 Solar Submersible Pump System for 8" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 240 mm 750 mm 490 mm 143 mm 197 mm 5 in

Net weight Controller

18 kg

Pump Unit

68 kg

Motor

48 kg

Pump End

20 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-9 C-SJ8-44 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 180 m max. 12 m³/h

Technical Data Controller PSk2-9 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 10 kW max. 850 V > 575 V max. 17 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 7.5kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...51 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 905 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ8-44 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-9 C-SJ8-44 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-9 C-SJ8-44 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

2 736 mm 645 mm 2 091 mm 144 mm 98 mm 2 in

Net weight Controller

18 kg

Pump Unit

78 kg

Motor

51 kg

Pump End

27 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-9 C-SJ17-11 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 90 m max. 25 m³/h

Technical Data Controller PSk2-9 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 10 kW max. 850 V > 575 V max. 17 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 7.5kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...54 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...3 080 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ17-11 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-9 C-SJ17-11 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-9 C-SJ17-11 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 568 mm 645 mm 923 mm 144 mm 133 mm 2,5 in

Net weight Controller

18 kg

Pump Unit

72 kg

Motor

51 kg

Pump End

21 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-9 C-SJ30-7 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 50 m max. 39 m³/h

Technical Data Controller PSk2-9 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 10 kW max. 850 V > 575 V max. 17 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 7.5kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ30-7 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-9 C-SJ30-7 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-9 C-SJ30-7 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 583 mm 645 mm 938 mm 144 mm 133 mm 3 in

Net weight Controller

18 kg

Pump Unit

69 kg

Motor

51 kg

Pump End

18 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-15 C-SJ17-18 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 140 m max. 22 m³/h

Technical Data Controller PSk2-15 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 15 kW max. 850 V > 575 V max. 24 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 11kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ17-18 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-15 C-SJ17-18 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-15 C-SJ17-18 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

2 083 mm 711 mm 1 372 mm 144 mm 133 mm 2,5 in

Net weight Controller

18 kg

Pump Unit

86 kg

Motor

57 kg

Pump End

29 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-15 C-SJ30-12 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 100 m max. 39 m³/h

Technical Data Controller PSk2-15 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 15 kW max. 850 V > 575 V max. 24 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 11kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ30-12 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-15 C-SJ30-12 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-15 C-SJ30-12 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

2 145 mm 711 mm 1 434 mm 144 mm 133 mm 3 in

Net weight Controller

18 kg

Pump Unit

84 kg

Motor

57 kg

Pump End

27 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-15 C-SJ42-6 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 50 m max. 65 m³/h

Technical Data Controller PSk2-15 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 15 kW max. 850 V > 575 V max. 24 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 11kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ42-6 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-15 C-SJ42-6 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-15 C-SJ42-6 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 670 mm 711 mm 959 mm 144 mm 147 mm 3 in

Net weight Controller

18 kg

Pump Unit

79 kg

Motor

57 kg

Pump End

22 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-15 C-SJ75-3 Solar Submersible Pump System for 8" wells System Overview Head Flow rate

max. 35 m max. 126 m³/h

Technical Data Controller PSk2-15 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 15 kW max. 850 V > 575 V max. 24 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 11kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ75-3 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-15 C-SJ75-3 (Motor, Pump End) Borehole diameter Water temperature

min. 8,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-15 C-SJ75-3 Solar Submersible Pump System for 8" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 451 mm 711 mm 740 mm 144 mm 197 mm 5 in

Net weight Controller

18 kg

Pump Unit

89 kg

Motor

57 kg

Pump End

32 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-15 C-SJ95-2 Solar Submersible Pump System for 8" wells System Overview Head Flow rate

max. 25 m max. 114 m³/h

Technical Data Controller PSk2-15 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 15 kW max. 850 V > 575 V max. 24 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 11kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ95-2 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-15 C-SJ95-2 (Motor, Pump End) Borehole diameter Water temperature

min. 8,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-15 C-SJ95-2 Solar Submersible Pump System for 8" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 325 mm 711 mm 614 mm 144 mm 197 mm 5 in

Net weight Controller

18 kg

Pump Unit

83 kg

Motor

57 kg

Pump End

26 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-15 C-SJ150-1 Solar Submersible Pump System for 10" wells System Overview Head Flow rate

max. 16 m max. 235 m³/h

Technical Data Controller PSk2-15 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 15 kW max. 850 V > 575 V max. 24 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 11kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ150-1 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-15 C-SJ150-1 (Motor, Pump End) Borehole diameter Water temperature

min. 9,8 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-15 C-SJ150-1 Solar Submersible Pump System for 10" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 431 mm 711 mm 720 mm 144 mm 230 mm 6 in

Net weight Controller

18 kg

Pump Unit

103 kg

Motor

57 kg

Pump End

46 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-21 C-SJ30-16 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 120 m max. 43 m³/h

Technical Data Controller PSk2-21 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 21 kW max. 850 V > 575 V max. 33 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 15kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ30-16 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-21 C-SJ30-16 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-21 C-SJ30-16 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

2 597 mm 777 mm 1 820 mm 144 mm 133 mm 3 in

Net weight Controller

18 kg

Pump Unit

102 kg

Motor

67 kg

Pump End

35 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-21 C-SJ42-10 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 90 m max. 62 m³/h

Technical Data Controller PSk2-21 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 21 kW max. 850 V > 575 V max. 33 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 15kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ42-10 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-21 C-SJ42-10 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-21 C-SJ42-10 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

2 191 mm 777 mm 1 414 mm 144 mm 147 mm 3 in

Net weight Controller

18 kg

Pump Unit

96 kg

Motor

67 kg

Pump End

29 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-21 C-SJ75-4 Solar Submersible Pump System for 8" wells System Overview Head Flow rate

max. 55 m max. 112 m³/h

Technical Data Controller PSk2-21 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 21 kW max. 850 V > 575 V max. 33 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 15kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ75-4 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-21 C-SJ75-4 (Motor, Pump End) Borehole diameter Water temperature

min. 8,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-21 C-SJ75-4 Solar Submersible Pump System for 8" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 640 mm 777 mm 863 mm 144 mm 197 mm 5 in

Net weight Controller

18 kg

Pump Unit

107 kg

Motor

67 kg

Pump End

40 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-21 C-SJ120-2-1 Solar Submersible Pump System for 10" wells System Overview Head Flow rate

max. 30 m max. 218 m³/h

Technical Data Controller PSk2-21 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 21 kW max. 850 V > 575 V max. 33 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 15kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ120-2-1 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-21 C-SJ120-2-1 (Motor, Pump End) Borehole diameter Water temperature

min. 9,8 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-21 C-SJ120-2-1 Solar Submersible Pump System for 10" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 337 mm 777 mm 560 mm 144 mm 230 mm 6 in

Net weight Controller

18 kg

Pump Unit

103 kg

Motor

67 kg

Pump End

36 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-25 C-SJ30-22 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 200 m max. 38 m³/h

Technical Data Controller PSk2-25 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 25 kW max. 850 V > 575 V max. 40 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 18.5kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ30-22 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-25 C-SJ30-22 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-25 C-SJ30-22 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

3 412 mm 1 018 mm 2 394 mm 143 mm 133 mm 3 in

Net weight Controller

18 kg

Pump Unit

118 kg

Motor

73 kg

Pump End

45 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-25 C-SJ42-12 Solar Submersible Pump System for 6" wells System Overview Head Flow rate

max. 90 m max. 66 m³/h

Technical Data Controller PSk2-25 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 25 kW max. 850 V > 575 V max. 40 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 18.5kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...50 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 850 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ42-12 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-25 C-SJ42-12 (Motor, Pump End) Borehole diameter Water temperature

min. 6,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-25 C-SJ42-12 Solar Submersible Pump System for 6" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

2 655 mm 1 018 mm 1 637 mm 143 mm 150 mm 3 in

Net weight Controller

18 kg

Pump Unit

100 kg

Motor

73 kg

Pump End

27 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-25 C-SJ95-4 Solar Submersible Pump System for 8" wells System Overview Head Flow rate

max. 60 m max. 112 m³/h

Technical Data Controller PSk2-25 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 25 kW max. 850 V > 575 V max. 40 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 18.5kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...52 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...2 965 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ95-4 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-25 C-SJ95-4 (Motor, Pump End) Borehole diameter Water temperature

min. 8,0 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-25 C-SJ95-4 Solar Submersible Pump System for 8" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 884 mm 1 018 mm 866 mm 143 mm 197 mm 5 in

Net weight Controller

18 kg

Pump Unit

108 kg

Motor

73 kg

Pump End

35 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-25 C-SJ150-2-2 Solar Submersible Pump System for 10" wells System Overview Head Flow rate

max. 35 m max. 228 m³/h

Technical Data Controller PSk2-25 ▪ High efficiency solar pump controller ▪ Hybrid power (solar / grid / generator) support with LORENTZ SmartSolution ▪ Inputs for water meter, pressure sensors, digital switches ▪ Simple configuration with LORENTZ PumpScanner Android™App ▪ Onboard data logging and system monitoring ▪ Inbuilt applications for constant pressure, constant flow and daily amount ▪ Integrated Sun Sensor ▪ Active temperature management ▪ Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class

max. 25 kW max. 850 V > 575 V max. 40 A max. 98 % -30...50 °C IP54

Motor AC DRIVE SUB 6" 18.5kW ▪ Highly efficient 3-phase AC motor ▪ Frequency: 25...53 Hz ▪ Premium materials, stainless steel: AISI 304 ▪ No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion

1 400...3 020 rpm 0,87 F IP68 max. 300 m

Pump End PE C-SJ150-2-2 ▪ ▪ ▪ ▪

Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump

Pump Unit PUk2-25 C-SJ150-2-2 (Motor, Pump End) Borehole diameter Water temperature

min. 9,8 in max. 30 °C

Standards 2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

PSk2-25 C-SJ150-2-2 Solar Submersible Pump System for 10" wells Pump Chart

Vmp* > 575 V

Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 =

500 mm 450 mm 421 mm 320 mm 290 mm 9,0 mm 226 mm

Pump Unit A= B= C= D= E= S=

1 738 mm 1 018 mm 720 mm 143 mm 230 mm 6 in

Net weight Controller

18 kg

Pump Unit

106 kg

Motor

73 kg

Pump End

33 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.90 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.