Download Logo - Opticki kablovi - katalog.pdf...
Fiber Optic Centar
Posvećeni kvalitetu Dedicated to quality
Logo d.o.o. je od samog osnivanja 1990. godine posvećen proizvodnji, plasmanu i implementaciji kvalitetnih proizvoda. Kvalitet kao imperativ, je bio osnovni razlog za uvođenje standarda ISO 9001:2000, sad već davne 2003. godine.
Logo d.o.o. has been dedicated to manufacture, placement and implementation of quality products since the very beginning. The quality as imperative was the main reason to implement standard ISO 9001:2000, in the year of 2003.
Paralelno je razvijan partnerski odnos sa kompanijom Huber Suhner, na čijoj tehnologiji se zasniva današnja proizvodnja.
Parallel relationship with company Huber+Suhner was developed. Today’s production is based on their technology.
2003. Logo uspostavlja proizvodnju optičkih patch kablova, pigtailova i multifiber kablova i postaje prepoznatljiv kao jedini domaći proizvođač i lider u regionu.
2003. Logo established optical patch cords, pigtail and multifiber cables production and became recognized as the sole national producer and the leader in the region.
Obučen kadar, kontrola kvaliteta, vrhunska oprema, materijali i potrošni materijal pružaju našim korisnicima najviši dostupni kvalitet po atraktivnoj ceni.
Skilled staff, quality control, top equipment and production materials offer our users the most accessible quality by attractive prices.
Stalni razvoj telekomunikacionih sistema, potrebe za većim brzinama prenosa podataka, novi servisi i zahtevi za apsolutnom pouzdanošću, čine optičke sisteme prenosa tehnologijom budućnosti, ali i sadašnjosti.
Constant telecommunication system development, necessity for speed-up data transfer, new services and requests for absolute reliability make optical system transfers a future technology as well as today’s technology.
U skladu sa zahtevima klijenata i razvojem tržišta, LOGO d.o.o. je kreirao FOC (fiberoptic centar), kao ONE STOP SOLUTION (sva rešenja na jednom mestu). Na jednom mestu možete kupiti proizvode, naručiti proizvodnju po specijalnim zahtevima, dobiti optimalno tehničko rešenje u skladu sa vašim potrebama i mogućnostima.
According to clients requests and market development, LOGO d.o.o. created FOC (fiberoptic center), as ONE STOP SOLUTION (all solutions in one place). In accordance with your needs and possibilities, there is the option to buy products, order a special request product, get optimal technical solution and all that in one place.
Fiber Optic Centar | 2
Sadržaj / Contents Posvećeni kvalitetu Dedicated to quality
2
Multifiber patch cord Multifiber patch cord
12
Sadržaj Contents
3
Lisa Lisa
13
Konektori Conectors
4,5
WAN – Optički razdelnici WAN – Optical Distribution Frame
Kablovi za unutrašnju upotrebu Indoor cables
6,7
WAN – Pristupna mreža WAN – Outside Plant
16
Kablovi za spoljašnju upotrebu Outdoor cables
8,9
LAN LAN
17
Proizvodnja po zahtevu korisnika Custom Product Assembly and Manufacturing
18
Pigtail Pigtail
10
Patch cord Patch cord
11
14,15
Fiber Optic Centar | 3
Konektori Connectors
Tip konektora Connector type
LX.5
zadovoljava standard / compliance
LC
MU
E-2000
SC
IEC 61754–23
IEC 61754–20
IEC 61754–6
IEC 61754–15
IEC 61754–4
TIA 604–13
TIA 604–10–A
TIA 604–16
TIA 604–3
45°
45°
60°
45°
Tjuniranje-podešavanje slabljenja / Tuning u koracima od / in steps
90°
Meh. Term. Osobine / Mech. therm. perform. zatezna čvrstoća / tensile load [N] broj konekcija / mating durability [cycles] temperaturni opseg /operating temperature
100
100
70
100
100
1000
1000
1000
1000
1000
-40° to +85 °C
-40° to +85 °C
-40° to +85 °C
-40° to +85 °C
-40° to +85 °C
•
•
•
•
•
brown
Zapaljivost / Flammability UL 94–V0
Boja kućišta / Colour of housing SM PC
blue
blue
blue
blue
SM APC
green
green
green
green
MM
beige
beige
beige
beige
E9/125
•
•
•
•
•
G50/125/OM3
•
•
•
•
•
G62.5/125
•
•
•
•
•
HCS200/230
–
–
–
•
•
metalni delovi od poniklovane bronze / brass nickel-plated
Tip vlakna / Fiber type
Osobine / Features jednodelni dizajn / one piece design
•
•
–
•
•
zaštitni poklopac / automatic metal shutter
•
–
–
•
–
Ø 1.25mm ferula / SFF connector
•
•
•
–
–
mogućnost obeležavanja konektora / colour coding
•
•
–
•
–
za HighPower primene / for HighPower applications prečnik kabla / cable diameter [mm]
•
•
–
•
•
0.6 up to 2.8
0.6 up to 2.8
0.6 up to 2.0
0.6 up to 3.5
0.6 up to 3.5
0.20
0.20
0.20
0.20
0.20
Uneto slabljenje / Insertion loss [dB]* multimode SM 0.1dB SM High–End SM LAN–Eco
typ. ≤ 97 % ≤
0.50
0.50
0.50
0.50
0.50
typ. ≤
0.06
0.06
n/a
0.06
0.06
97 % ≤
0.15
0.15
n/a
0.15
0.15
typ. ≤
0.12
0.12
0.12
0.12
0.12
97 % ≤
0.25
0.25
0.25
0.25
0.25
typ. ≤
0.20
0.20
0.20
0.20
0.20
97 % ≤
0.45
0.45
0.45
0.45
0.45
Povratno slabljenje / Return loss [dB] PC >
45
45
45
45
45
UPC >
50
50
50
50
50
APC >
85
–
–
50
50
singlemode
Fiber Optic Centar | 4
FC
DIN
ST-LEAN
ST-HQ
ST-SEC
MTRJ
FSMA
IEC 61754–13
IEC 61754–3
IEC 61754–2
IEC 61754–2
IEC 61754–2
IEC 61754–18
IEC 60874–2
TIA 604–4–A
DIN 47256
TIA 604–2
TIA 604–2
TIA 604–2
TIA 604–12
PC infinitely APC 60°
60°
100
100
100
100
100
70
100
1000
1000
1000
1000
1000
1000
1000
-40° to +85 °C
-40° to +85 °C
-40° to +85 °C
-40° to +85 °C
-40° to +85 °C
-25° to +85 °C
-40° to +85 °C
black black •
•
• (black nut)
•
•
•
•
•
–
•
•
•
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
•
–
–
•
•
•
•
•
•
–
•
•
–
–
–
–
–
–
•
–
–
–
–
•
–
•
–
–
–
–
–
–
•
•
–
–
–
–
–
0.6 up to 3.5
0.6 up to 3.5
0.6 up to 3.5
0.6 up to 3.5
0.6 up to 3.5
0.6 up to 1.7
0.6 up to 4.5
0.20
0.20
0.25
0.20
0.20
0.25
1.00
0.50
0.50
0.70
0.50
0.50
0.70
1.50
0.06
n/a
n/a
n/a
n/a
n/a
n/a
0.15
n/a
n/a
n/a
n/a
n/a
n/a
0.12
0.12
n/a
n/a
n/a
n/a
n/a
0.25
0.25
n/a
n/a
n/a
n/a
n/a
0.20
0.20
0.20
0.20
0.20
0.25
n/a
0.45
0.45
0.45
0.45
0.45
0.70
n/a
45
45
–
45
45
35
–
50
50
–
–
–
–
–
50
50
–
–
–
–
– Fiber Optic Centar | 5
Kablovi za unutrašnju upotrebu Indoor Cables
Tipovi kabla Cable type Polu-stegnuta konstrukcija-za pigtailove / Semi-tight tubes Stegnuta konstrukcija-za pigtailove / Tight tubes Simplex sa polu-stegnutom konstrukcijom za patch kablove / Simplex with semi-tight tubes Simplex za patch kablove-savitljiviji / Simplex with soft semi-tight tubes
Duplex (Zipcord) 1.7 mm - za patch kablove Duplex (Zipcord) 2/2.7 mm - za patch kablove Duplex - za patch kablove
Breakout - 4-16 vlakana
Nezapaljivi / Fire resistant breakout cable
Riser - 4-16 vlakana
Jellyfree - 12 vlakana Jellyfree - 24 vlakna Jellyfree - 60 vlakana Multi-fiber LSFH - 24 vlakna
Fiber Optic Centar | 6
Prečnik simplex kabla Ø Single-fiber cable (mm)
Debljina omotača Jacket Ø (mm)
Kod za naručivanje Ordering key
Težina Weight (kg/ km)
Broj vlakana Number of fibers
Prečnik tube Tube Ø (mm)
01-.../CH-...9
0.68
1
0.9
0.9
01-.../F-...9
0.76
1
0.9
0.9
01-.../CWJH-…20
3.7
1
0.9
2.0
01-.../CWJH-…27
6.4
1
0.9
2.7
01-.../CWJH-…30
8.0
1
0.9
3.0
01-.../SWJH-…17
2.8
1
0.9
1.7
01-.../SWJH-…21
3.8
1
0.9
2.1
01-.../SWJH-…24
5.3
1
0.9
2.4
01-.../SWJH-…27
7.0
1
0.9
2.7
01-.../SWJH-…30
8.9
1
0.9
3.0
02-.../VJH-…17
5.6
2
0.6
1.7
1.7x3.5
02-.../CWJH-20
7.8
2
0.9
2.0
2.0x4.1
02-.../CWJH-27
12.5
2
0.9
2.7
2.7x5.5
02-.../CWJH-A20
18
2
0.9
2.0
3.1x5.2
02-.../CWJH-A27
24.2
2
0.9
2.7
3.5x6.2
04-.../CWJSNH-20
47
4
0.9
2.0
7
08-.../CWJSNH-20
82
8
0.9
2.0
9
12-.../CWJSNH-20
144
12
0.9
2.0
12
16-.../CWJSNH-20
135
16
0.9
2.0
12
04-.../CWJSNHIH-...20
96
4
0.9
2.0
10.0
08-.../CWJSNHIH-...20
141
8
0.9
2.0
12.0
12-.../CWJSNHIH-...20
219
12
0.9
2.0
15.0
04-.../FSN(ZN)H-50
28
4
0.9
06-.../FSN(ZN)H-55
30
6
0.9
5.5
08-.../FSN(ZN)H-60
33
8
0.9
6.0
5.0
12-.../FSN(ZN)H-70
52
12
0.9
7.0
16-.../FSN(ZN)H-85
64
16
0.9
8.5
12-.../H(ZN)H-...50
25
2-12
3.0
5.0
24-.../H(ZN)H-...50F
50
12-24
3.0
5.0x10.2
60-.../HSN(ZN)H-...110
96
-60
3.0
11.0
24-24.../W(ZN)H-...50
26
24
2.8
5.0
24-24.../W(ZN)H-...50
20
24
2.8
5.0
Vrsta omotača Cable jacket
Mogućnost direktnog montiranja konektora Direct connector assembly
Zatezna čvrstoća u eksploataciji Tensile strenghtin servise (N)
Min. prečnik savijanja Min. bend radius in service (mm)
Otpornost na gnječenje Crush resistance short-term (N/cm)
Otpornost na udar Impact resistance (impacts)
Temperaturni opseg u eksploataciji Temperature range in service (° C)
PBT
•
10
25
100
3
-25 to +70
TPE
•
10
25
400
100
-40 to +80
LSFH
•
200
30
250
10
-20 to +70
LSFH
•
200
30
500
20
LSFH
•
200
30
500
20
LSFH
•
50
25
500
10
-40 to +70
LSFH
•
100
25
500
10
-25 to +70
Zapaljivost Fire propagation IEC 60332-1
Zapaljivost Fire propagation IEC 60332-3
-25 to +70
p
p
-25 to +70
p
p
LSFH
•
150
25
700
10
-25 to +70
p
LSFH
•
200
25
700
10
-25 to +70
p
p
LSFH
•
250
25
700
10
-20 to +70
p
p
LSFH
•
2x50
25
100
3
-40 to +70
p
LSFH
•
2x100
25
500
40
-25 to +70
p
p
LSFH
•
2x100
30
1000
40
-20 to +70
p
p
LSFH
•
2x100
25
500
40
-20 to +70
p
LSFH
•
2x100
30
1000
40
-20 to +70
p
p
LSFH
•
4x100
70
400
50
-25 to +70
p
p
LSFH
•
8x100
80
400
50
-25 to +70
p
p
LSFH
•
12x100
120
400
50
-25 to +70
p
p
LSFH
•
16x100
120
400
50
-25 to +70
p
p
LSFH
•
4x100
95
400
50
-25 to +70
p
p
LSFH
•
8x100
115
400
50
-25 to +70
p
p
LSFH
•
12x100
145
400
50
-25 to +70
p
p
LSFH
•
400
50
1800
100
-20 to +70
p
p
LSFH
•
550
50
1800
100
-20 to +70
p
p
LSFH
•
800
60
1800
100
-20 to +70
p
p
LSFH
•
1000
70
1800
100
-20 to +70
p
p
LSFH
•
1400
85
1800
100
-20 to +70
p
p
LSFH
400
50
300
50
-5 to +70
p
LSFH
2x400
50
300
50
-5 to +70
p
LSFH
1000
110
500
100
-25 to +70
p
LSFH
400
50
300
50
-25 to +70
p
PE
400
50
300
50
-25 to +70 p=passed Fiber Optic Centar | 7
Kablovi za spoljašnju upotrebu Outdoor Cables
Kod za naručivanje Ordering key
Težina Weight (kg/km)
Broj vlakana Amount of fibers
Prečnik tube Multi-fiber loose tube Ø (mm)
Vrsta omotača Jacket material
12-.../W(ZNG)Y-…85
63
2-12
3
PE
12-.../W(ZNG)H-…85
83
2-12
3
LSFH
24-24.../W(ZNG)Y-…85
63
24
2.8
PE
24-24.../W(ZNG)H-…85
85
24
2.8
LSFH
12-.../W(ZNG)Y-…120
135
2-12
3
PE
24-.../W(ZNG)Y-…94
69
-24
3
PE
24-.../W(ZNG)H-…94
90
-24
3
LSFH
60-.../WSN(ZNG)Y-…150
178
-60
3
PE
72-.../WSN(ZNG)Y-…160
178
-72
3
PE
96-.../WSN(ZNG)Y-…180
263
-96
3
PE
120-.../WSN(ZNG)Y-…200
332
-120
3
PE
144-.../WSN(ZNG)Y-…220
385
-144
3
PE
Nemetalni kabl sa više tuba - 60 vlakana / Glass-armoured multifiber loose tube - 60 fibers
60-.../WSN(ZNG)H-…116
130
-60
3
LSFH
Kabl sa metalnom zaštitom 2-12 vlakana / Steel-armoured multifiber loose tube 2-12 fibers
12-.../W(ZN)YAY-…80
70
2-12
3
PE
Kabl bez zaštite od glodara 2-12 vlakana / Non-armoured multifiber loose tube 2-12 fibers
12-.../W(ZN)Y-…50
20
2-12
3
PE
60-.../WSN(ZN)Y-…115
83
-60
3
PE
72-.../WSN(ZN)Y-…125
101
-72
3
PE
96-.../WSN(ZN)Y-…145
177
-96
3
PE
120-.../WSN(ZN)Y-…165
185
-120
3
PE
144-.../WSN(ZN)Y-…180
225
-144
3
PE
Tipovi kabla Cable type Nemetalni kabl sa centralnom tubom 2-12 vlakana / Glass-armoured multi-fiber loose tube 2-12 fibers Nemetalni kabl sa centralnom tubom 24 vlakna / Glass-armoured multi-fiber loose tube - 24 fibers Čvrst nemetalni kabl sa centralnom tubom 2-12 vlakana / Rugged glass-armoured multi-fiber loose tube 2-12 fibers Nemetalni kabl sa dve tube / Glass-armoured multi-fiber loose tube - 24 fibers TWINTUBE
Nemetalni kabl sa više tuba do 144 vlakana / Glass-armoured multi-fiber loose tube stranded 144 fibers
Kabl bez zaštite od glodara do 144 vlakna / Non-armoured multi-fiber loose tube stranded - 144 fibers
Fiber Optic Centar | 8
Debljina omotača Jacket Ø (mm)
Zaštita od glodara Rodent protection
Zatezna čvrstoća u eksploataciji Tensile strenght in service (N)
Min. prečnik savijanja Min. bend radius in service (mm)
Otpornost na gnječenje Crush resistance short-term (N/cm)
Otpornost na udar Impact resistance (impacts)
Temperaturni opseg u eksploataciji Temperature range in service (° C)
8.5
p
1500
80
400
30
-40 to +70
8.5
p
1500
80
400
30
-40 to +70
8.5
p
1500
80
400
30
-25 to +70
8.5
p
1500
80
400
30
-25 to +70
12
p
4500
120
3000
30
-20 to +70
9.4x8.8
p
1500
100
800
-
-20 to +70
9.4x8.8
p
1500
100
800
-
-20 to +70
15
p
4500
150
800
100
-40 to +70
16
p
6500
160
800
100
-40 to +70
18
p
6500
180
800
100
-40 to +70
20
p
9000
200
800
100
-40 to +70
22
p
9000
220
800
100
-40 to +70
11.6
p
3500
120
800
50
-40 to +70
8
p
500
80
400
50
-25 to +70
5
400
50
300
50
-20 to +70
11.5
1000
120
500
100
-25 to +70
12.5
1000
120
500
100
-25 to +70
14.5
2000
150
500
100
-25 to +70
16.5
2000
160
500
100
-25 to +70
18.0
2000
180
500
100
-25 to +70
Zapaljivost Fire propagation IEC 60332-1
Zapaljivost Fire propagation IEC 60332-3
p
p
p
p
p
p
p
p
p=passed Fiber Optic Centar | 9
Pigtail Pigtail Pigtail je optički kabl na čijem je samo jednom kraju konektor. Kraj na kome nema konektora se splajsuje na optički kabl unutar završnih optičkih kutija ili optičkih distributivnih ormana. Logo izradjuje pigtailove od Tight ili Semi-tight tube kabla prečnika 900μm. Izrada se obavlja od repromaterijala i po tehnologiji švajcarske kompanije Huber +Suhner. Tipovi konektora koje Logo koristi u proizvodnji pigtailova su: SC, ST, LC, FC, E2000, MU, DIN. Takođe, nudi sva tri načina poliranja PC, UPC i APC i četiri različita tipa vlakana: singlemode 9/125μm (OS1), multimode 50/125μm (OM2 i OM3), multimode 62.5/125μm (OM1).
Pigtails are fiber optic cables fitted at one end with connector. They are spliced onto optical cables within cable termination boxes and distribution frames. Logo produces pigtails of Tight or Semi-tight tube cables with diameter of 900μm. In production Logo uses raw material and technology of company Huber+Suhner. In production of pigtails Logo uses the following connectors: SC, ST, LC, FC, E2000, MU, DIN.; PC, UPC or APC polishing type and four different fiber types: singlemode 9/125μm (OM1), multimode 50/125μm (OM2 i OM3), multimode 62.5/125μm (OM1) .
Napomena:
** Huber+Suhner offers three assembly classes: 0.1 dB Class, High-End Class and LAN-Eco Class. Logo in its production employs High-End class.
* Huber+Suhner razlikuje tri klase asembliranja: 0.1 dB Class, High-End Class and LAN-Eco Class. Standardna Logo klasa asembliranja je High-End class.
Note:
* Klase asembliranja ** Assembly classes 0.1 dB Class Uneto slabljenje / Insertion loss
0.15 dB; max 0.15 dB; mean 0.06 dB
IEC 61755-2-2
Povratno slabljenje / Return loss
> 45 dB (PC); > 50 dB (UPC);> 85 dB (APC)
IEC 61300-3-6
Uneto slabljenje / Insertion loss
0.25 dB; max 0.35 dB; mean 0.12 dB
IEC 61300-3-34
Povratno slabljenje / Return loss
> 45 dB (PC); > 50 dB (UPC);> 85 dB (APC)
IEC 61300-3-6
Uneto slabljenje / Insertion loss
0.70 dB; max 0.50 dB; mean 0.25 dB
IEC 61300-3-34
Povratno slabljenje / Return loss
> 35 dB (PC);> 85 dB (APC)
IEC 61300-3-6
High-End Class
LAN-Eco Class
Fiber Optic Centar | 10
Patch cord Patch cord Patch kabl je optički kabl sa konektorima na oba kraja. Uglavnom se koristi kao veza između optičkih distributivnih ormara/kutija i uređaja u njima ili za međupovezivanja u okviru optičkih distributivnih ormara, a prave se u Simplex i Duplex varijanti. Logo prizvodi optičke patch kablove po tehnologiji i od repromaterijala kompanije Huber+Suhner. U proizvodnji patch kablova Logo koristi sladeće tipove konektora: SC, ST, LC, FC, E2000, MU, DIN i tri načina poliranja PC, UPC i APC. Patch kablove pravi u Simplex ili Duplex varijanti koristeći kablove sa sledećim tipovima vlakana: singlemode 9/125μm (OS1), multimode 50/125μm (OM2 i OM3), multimode 62.5/125μm (OM1). Napomena: * U cilju obezbeđenja najboljih mehaničkih, termičkih i optičkih karakteristika singlmodnih patch kablova Huber+Suhner primenjuje nekoliko testova u skladu sa važećim međunarodnim standardima /Sequential Test Series according to TELCORDIA GR-326-Core 13/.
Patch cord is a fiber optic cable equipped with connectors at both ends. They are mainly used as connections between cable termination boxes and transmission equipment or as jumper cables, in Simplex and Duplex version. In production of patch cord Logo uses raw material and technology of company Huber+Suhner. In production of patch cord Logo uses the following connectors: SC, ST, LC, FC, E2000, MU, DIN.; PC, UPC or APC polishing type. Logo offers simplex and duplex patch cord with four different fiber types: singlemode 9/125μm (OM1), multimode 50/125μm (OM2 i OM3), multimode 62.5/125μm (OM1). Note:
** Huber+Suhner applies several tests - according to most relevant international standards - to ensure highest mechanical, thermal and optical properties for its singlemode cable assemblies / Sequential Test Series according to TELCORDIA GR-326-Core 13/.
* Test procedure ** Test procedures Temperaturni opseg / Change of temperature
-40° to +75°C
IEC 61300-2-22
Uvrtanje ± 900° / Torsion ± 900°
> 15 N, 10 ciklusa
IEC 61300-2-5
Zatezna čvrstoća / Tensile Load
> 100 N, takođe za SFF konektore
IEC 61300-2-4
Broj konekcija / Mating Durability
> 1000 ciklusa
IEC 61300-2-2
Side Load
13 N, takođe za SFF konektore
IEC 61300-3-34
Flexing ± 90°
8.9 N, 100 ciklusa, takođe za SFF konektore
IEC 61300-2-44
Vibration 3 axes
10-55 Hz, 2h/axis, 1,52 mm amplitude
IEC 61300-2-1
Fiber Optic Centar | 11
Multifiber Patch Cord Multifiber Patch Cord Multifiber patch cord je optički kabl sa više pojedinačnih simplex kablova/ vlakana sa konektorima na oba kraja.
Multifiber patch cord is optical cable with a few simple cables/fibers and with connectors at both ends.
Multifiber patch cord se nudi u dve varijante:
Multifiber patch cord can be offered in two versions:
1. Smartline proizvodni program podrazumeva izradu od sledećih tipova optičkih kablova: - Breakout kabl (sastoji se od više pojedinačnih 2mm simplex kablova) - Riser kabl (sastoji se od više pojedinačnih 0.9mm tight tube kablova)
1. Smartline cable sistems: - Breakout cable (consists of a few simplex cables diameter 2mm) -R iser cable (consists of a few 0.9mm tight tube cables) 2. Masterline cable sistems: - Loose tube cables
2. Masterline proizvodni program podrazumeva izradu od: - Loose tube kablova Primena: - Instalacija okosnice zgrade (vertikalno kabliranje) i okosnice kampusa - U WAN, MAN, LAN, SAN mrežama - FTTD - Fiber To The Desk - u industrijskom okruženju
Application: -b uilding backbone (vertical wiring) or campus backbone - WAN, MAN, LAN, SAN networks - FTTD - Fiber To The Desk - wiring in industrial enviroments
Multifiber patch cord-ovi obezbeđuju brzu i jednostavnu instalaciju jer ne zahtevaju splajsovanje niti terminiranje (asembliranje) konektora. Na ovaj način obezbeđene su sve komponente jedne optičke veze i odmah nakon instalacije može da počne eksploatacija sistema po principu plug and play.
Multifiber patch cord provides a fast and easy installation without splicing and connector termination (ready to use and plug and play sistems).
Kod za naručivanje / Ordering code
FOPAMF XXX / XXX – XXX / XXX XXX XXX XXX / XXX – XXX Konektori na jednoj strani (SC, ST, LC, FC, E2000, MU, DIN) Poliranje na jednoj strani (PC, UPC, APC) Konektor na drugoj strani (SC, ST, LC, FC, E2000, MU, DIN) Poliranje na drugoj strani (PC, UPC, APC) Tip vlakna (SM, M50, M62.5, OM3) Tib kabla * (B4, B8, B12, B16, R4, R6, R8, R12, R16, L12, L24, L48, L72, L144) Ukupna dužina Multifiber patch cord kabla u m (001-200, opcija: dužine po zahtevu kupca) Dužine pojedinačnih kablova (vlakana) na prvom kraju u cm (001-150, opcija: dužine po zahtevu kupca) Dužine pojedinačnih kablova (vlakana) na drugom kraju u cm (001-150, opcija: dužine po zahtevu kupca)
Napomena:
* B u kodu za naručivanje označava breakout, R riser, a L Loose Tube kablove, dok broj pored njih označava broj vlakana (kablova).
Fiber Optic Centar | 12
Lisa Lisa LISA (Leading Interconnect Systems Approach) predstavlja inteligentno rešenje u izradi pasivnih fiber optičkih distributivnih sistema. Ono obuhvata modularnu grupu proizvoda koja omogućava konstrukciju SingleCircuit (max 2 konekcije po splajs kaseti) i MultiCircuit (max 24 konekcije po splajs kaseti) pasivnih optičkih mreža. LISA sistemsko rešenje kompanije Huber+Suhner se se odlikuje: visokom pouzdanošću, fleksibilnošću, modularnom strukturom i lakim rukovanjem. Primenu nalazi u sledećim oblastima: - WAN MAN mrežama Central office Outside plant Network termination - LAN/Enterprise mrežama Sistemsko rešenje LISA nudi dva osnovna tipa optičkog razdelnika: Side Access i Front Access. Obe ove varijante mogu koristiti dva načina organizovanja kablova kao što su: MultiCircuit i SingleCircuit Management.
LISA (Leading Interconnect Systems Approach) - the intelligent solution for passive fiber optics distribution systems. The Lisa products range represents a modular group of products that enables seamless construction of SingleCircuit and MultiCircuit Passive Optical Networks. LISA ensures a safe, flexible and easyto-handle management of fibers in the areas: - WAN MAN Central office Outside plant Network termination - LAN/Enterprise The LISA distribution system includes all necessary LISA components for SingleCircuit and MultiCircuit management as well as distinct products for FrontAccess and SideAccess systems.
Fiber Optic Centar | 13
WAN – Optički razdelnici WAN – Optical Distribution Frame Optički razdelnici - Front Access - modularni sistem - čeoni pristup optičkim modulima - standardna dimenzija rack-a (ETS i 19”) - 4 različita tipa rack-a: ODR 300F, ODR600F, ODR900F, ODR 1200F - odvojenost dolaznih i odlaznih kablova - uredno aranžiranje i pouzdano vođenje optičkih kablova u rack-u - ograničenje radijusa savijanja: 35mm za vlakna i patch kablove; 45 mm za loose tubes - mogućnost primene i standardnih i SFF tipova konektora - maksimalni kapacitet: 960 vlakana po rack-u - kompaktni moduli za MCM ili SCM aplikacije - postojanje modula samo za splajsovanje bez kaplera - MCM spliter moduli - upotreba: Telekom, CATV, WAN/MAN
- modular system - frontal fiber position - standardized rack dimensions (ETS and 19) - 4 different rack types: ODR 300F/ODR 600F/ ODR 900F/ ODR 1200F - separation of incomming and outgoing fiber - clearly arranged and secure cable management - radius limitation: 35 for fiber and patch cord; 45 mm for loose tubes - integration of standard and small form factor connectors - max. capacity: 960 fibers per rack - compact modules for MCM and SCM applications - modules for splicing only - MCM splitter modules - applications: Telecom, CATV, WAN/MAN
Subrack
Subrack
- maksimalni kapacitet: 8 MCM ili 4SCM modula - visina: 4U - lak pristup unutrašnjem prostoru u subrack-u izvlačenjem integrisanih optičkih modula - ograničen radijus savijanja: 45 mm za dolazne kablove i 35 mm za patch cord-ove
- max. capacity: 8 MCM or 4 SCM compact modules - height: 4U - good access to inner space by pulling out or removing the integrated drawer - bend radius limitation for incoming cables 45 mm and for patchcord 35 mm
Optički moduli
- two different types: for MultiCircuit (MCM) ili SingleCircuit (SCM) management - for all connector types including SFF - max. capacity: 12 fibers - simple instalation and maximum security
- dva različita tipa: za MCM ili SCM način vođenja kablova - koriste sve tipove konektora uključujući SFF - maksimalni kapacitet: 12 vlakana - jednostavna instalacija i maksimalna pouzdanost
Fiber Optic Centar | 14
Optical Distribution Frame / Front Access
Optical modules
WAN – Optički razdelnici WAN – Optical Distribution Frame Optički razdelnici - Side Access - horizontalno postavljeni o. moduli sa bočnim pristupom - brza i jednostavna instalacija - standardna dimenzija rack-a (ETS) - 2 različita tipa rack-a: ODR 600S i ODR 900S - odvojenost dolaznih i odlaznih kablova - inteligentno rešenje u vođenju kablova - ograničenje radijus savijanja: 30mm za vlakna i patch kablove - mogućnost primene i standardnih i SFF tipova konektora - maksimalni kapacitet: 960 vlakana pri korišćenju standardnih i 1920 vlakana u slučaju korišćenja SFF konektora - MCM spliter moduli - upotreba: Telekom, CATV, WAN/MAN
Subrack za horizontalne module - raspoloživ u sledećim dimenzijama: 1U, 2U, 3U ili 6U - u svakom U moguće je smestiti 2 horizontalna modula sa max. kapacitetom od 12 vlakana - predviđen za 19’’ ormane - mogućnost pričvršćivanja zaštitnih cevi za subrack - integrisane vođice za patch kablove sa limiterima radijusa savijanja kabla
Horizontalni optički moduli - predviđeni za sve tipove konektora uključujući SFF - horizontalni raspored adaptera sa bočnim pristupom – povećana sigurnost - kapacitet do 12 vlakana (24 vlakana u slučaju SFF konektora) - predviđen za montažu u optičke razdelnike (ODR 600S, ODR 900S), u ulične kabinete i zok-ove (WBC, WBH) - visina: 18mm (2 vlakna po 1U) - postojanje spliter modula do 1:32
Optical Distribution Frame / Side Access - side facing fiber position - fast installation from front side - standardized rack dimensions (ETS) - 2 different rack types: ODR 600S and ODR 900S - separation of incomming and outgoing fiber - intelligent patchcord management - radius limitation of 30 mm for fibers and patchcords - integration of standard and small form factor connectors - max. capacity: 960 fibers using standard and 1920 fibers using SFF connectors - MCM splitter modules - applications: Telecom, CATV, WAN/MAN
ODR Tray Units - available as 1U, 2U, 3U or 6U units - each U acommodates 2 fiber trays with each max. capacity of 12 fibers - 19’’ rear mounted for improved access - retractable clips for fixing conduits - integrated patchcord mandrels and bend radius limiters
Fiber Trays - for all connector types including SFF - horizontally arranged adapters, side facing for laser safety - up to 24 fibers using SFF connectivity - insertion in optical distribution frames (ODR 600S, ODR 900S), outdoor cabinets, wall box (WBC, WBH) - height: 18mm (2 fiber trays per 1U) - splitter configuration up to 1:32 per height unit
Fiber Optic Centar | 15
WAN – Pristupna mreža WAN – Outside Plant Cross-Connect ulični kabineti
Cross-Connect Cabinets
- otporni na spoljne uticaje - opremljeni modularnim, 19” ili ETSI, optičkim distributivnim blokovima - visina: 17U, 21U, 2x21 U - maksimalni kapacitet: 816 vlakana sa standardnim konektorima ili 1932 sa SFF konektorima - mogućnost implementacije svih vrsta Front Access ili Side Access modula - standardna zaštita IP 54
- weather-proofed outdoor cabinet - assembly of modular building block with 19” or ETSI dimensions - height: 17U, 21U, 2x21 U - max. capacity: 816 fibers with standard connectors or 1932 fibers with SFF connectors - suitable for Front access and Side access modules - protection class IP 54
Optičke spojnice
Splice Closures
- tri različita tipa: USC 500, USC 600 i USC 750 - maksimalni kapacitet: 96 vlakana kod MCM i 60 vlakana kod SCM načina vođenja kablova - ograničenje radijusa savijanja vlakana 35 mm - podesne za različite tipove kablova - mogućnost podzemne i nadzemne montaže - jednostavna i brza instalacija, direktan i lak pristup splajs kasetama - standardna zaštita IP67 (DIN 40050)
- 2 different rack types: USC 500, USC 600 and USC 750 - max. capacity: 96 fibers with MCM and 60 fibers with SCM - bend radius limitations of 35 mm for fibers - suitable for deferent cable types - for aerial and underground applications - easy and fast installation, direct and simple access to the fiberoptic cassettes - protection class IP 67 (DIN 40050)
Zok za spoljašnu montažu - predviđen za spoljašnju uz postojanje mogućnosti i unutrašnje upotrebe - maksimalni kapacitet: 48 vlakana - podesan za različite tipove kablova - četiri tipa konfiguracije: • splice • splice/patch • splice/patch/splice • patch - standardna zaštita IP54/IP64
Fiber Optic Centar | 16
Wall Box Outdoor - for outdoor and indoor applications - max. capacity: 48 fibers - various cable entry possibilities - 4 different configurations can be achieved: • splice • splice/patch • splice/patch/splice • patch - protection class IP 54/IP 64
LAN LAN Patch paneli
Patch Panels
- za 19” rack ormane - maksimalni kapacitet: 48 vlakana - tipovi adaptera: ST, LC, SC, FC, E2000, MTRJ - koriste MCM splice kasete sa ograničenjem radijusa savijanja kablova od 35 mm - visina: 1U ili 2U
- for 19” rack installation - max capacity: 48 fibers - adapter types: ST, LC, SC, FC, E2000, MTRJ - interface for MCM splice cassette with bend radius 35 mm throughout - height: 1U or 2U
Završne optičke kutije
Wall Box
- za unutrašnju upotrebu - maksimalni kapacitet: 144 vlakana - tri tipa konfiguracije: • splice • splice/patch • patch - mogućnost korišćenja i MCM i SCM splice kaseta
- for indoor applications - max. capacity: 144 fibers - three different configurations can be achieved: • splice • splice/patch • patch - suitable for SCM and MSC splice cassette
Splice kasete - dva različita tipa: MCM i SCM - ograničen radijus savijanja 35 mm - kapacitet za MCM - 24 vlakana - kapacitet za SCM - 2 vlakna
Pribor - mehaničke cevčice za splajsovanje - termoskupljajuće cevčice za splajsovanje - držači cevčica - uvodnici kabla u splajs kasetu - i oslali pribor
Splice Cassette - two different types: MCM and SCM - bend radius limitation 35 mm - max. capacity for MCM - 24 fibers - max. capacity for SCM - 24 fibers
Accessories - ant sandwich splice protection - shrink splice protection - splice holder - pigtail strain relief
Fiber Optic Centar | 17
Proizvodnja po zahtevu korisnika Custom Product Assembly and Manufacturing Karakteristike i posebne usluge: - Ove usluge omogućavaju odgovarajući kvalitet, količinu, cene i isporuku tačno na vreme a odnose se na krajnje korisnike, distributere i OEM proizvođače. - Fleksibilna proizvodnja u zahtevanom obimu. - LOGO korisniku omogućava znatno smanjenje vremena isporuke i troškova proizvodnje i skladištenja. - Osim izrade proizvoda, Logo omogućava korisnicima i dodatne pogodnosti kao što su: sklapanje proizvoda, tampon štampa po zahtevu, pakovanje i isporuka.
Neke od proizvodnih mogućnosti po zahtevu kupca: - Obrađeni kablovi i zaliveni računarski kablovi. - Obrada optičkih kablova - Montaža elektro-mehaničkih sklopova - Obeležavanje, izrada barkodova, tampon štampa i pakovanje po zahtevu. - Nabrizgavanje i brizganje plastike. - Izrada po specifikacijama klijenta ili reprodukcija po klijentovom uzorku. - Uz saradnju sa partnerskim firmama, omogućeno je projektovanje i izrada mašinskih sklopova i alata za brizganje plastike.
Fiber Optic Centar | 18
Key Specifications and Special Features - The services are offered to end-users, OEMs and to distributors providing the right quantity, quality at the right time, for the best cost. - Flexible production in the required volume. - Cooperation with Logo enables the customer to significantly reduce deliverytime and decrease manufacturing and storage costs. - Besides the product manufacturing, Logo can offer a variety of additional “value-added” services for customers, including product assembly and custom pad printing, packaging and shipping.
Custom Manufacturing Capabilities include, but are not limited to: - Assembled and Injection Molded Data Cables - Fiber optic Cables Assemblies - Electro-mechanical Assemblies - Custom Labeling, Bar coding, Pad printing and Packaging - Insert and Injection Molding - We can also assemble to your specifications or accurately reproduce your samples - Our partner companies can design and produce your tools (molds) and machining components.
Fiber Optic Centar | 19
LOGO d.o.o. Bulevar kralja Aleksandra 261 11000 Beograd tel: +381 11 2042 100 fax : +381 11 2444 617
[email protected] [email protected] www.logo.rs
