log in to 3900

October 29, 2017 | Author: Khaled Hosny Ahmed | Category: N/A
Share Embed Donate


Short Description

log in to 3900...

Description

Mansoura office

How to log in to BTS 3900

BY

AHMED REDA BORHAM MANSOURA OFFICE ALKAN CIT

How to log in to BTS Setting the IP Address of the Site Maintenance Te 3900 rminal PC Locally Connecting the SMT PC to the BTS

Logging in to the BTS at the Loca l End

TWO WAY TO LOG IN

Logging In to the LMT You can directly log in to the LMT, or the LMT through the M2000 client.

Logging In to the SMT the Site Maintenance Terminal (SMT )

log in to

HOW TO Logging In to the SMT Setting the IP Address of the Site Maintenance T erminal PC set the IP address of the SMT PC to the same network segment as the IP address (192.168.0.72/255.255.255.0) of the BTS Locally Connecting the SMT PC to the BTS connect the Site Maintenance Terminal (SMT) PC to the ETH port on the main control module (GTMU )of the BTS through an Ethernet cable , and the other end is connected to the Ethernet port on the SMT PC

Logging in to the BTS at the Loc al End 1- run the SMT to directly log in to the BTS at the local end If the SMT PC communicates with the BTS normally, a window is displayed

If the SMT PC cannot communicate with the BTS, the Communication failed dialog box is displayed

Click Yes. The Set Communication Port Parameter dialog box is displayed, as shown in

In the Select Communication Port area, click Network Port. In the Configure IP area, set the IP address to 192.168.0.72.

In the Site Maintenance Terminal System window, click User, and select User Login . Enter User Name (Omc by default) and User Password (Omc by default). Logging in to the BTS succeeds.

THANKS MANSOURA OFFICE

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF