List of Available SANS Codes

January 12, 2018 | Author: Ebrahim Floris | Category: Electrical Conductor, Welding, Textiles, Pipe (Fluid Conveyance), Electromagnetic Compatibility
Share Embed Donate


Short Description

List of Available SANS Codes...

Description

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1-1:2009

2

Standard for standards Part 1: The development of South African national standards and other normative documents

SANS 1-2:2007

1

Standards for standards Part 2: Requirements for the recognition of Standard Development Organizations (SDOs) in South Africa

SANS 2:2009 (SABS 2)

7

Lead-acid starter batteries

SANS 4:2008

3.03

Locks, latches, and associated furniture for doors (Domestic Type)

SANS 11:2007 (SABS 11)

1.02

Unplasticized poly(vinyl chloride) (PVC-U) components for external rainwater systems

SANS 13:2008

2.03

Wax polish, solvent-based, for floors and furniture

SANS 14:1994/ISO 49:1994, IDT, Ed. 2 (SABS ISO 49)

1

Malleable cast iron fittings threaded to ISO 7-1

SANS 15:2008

2.03

Wax emulsion polish for floors and furniture

SANS 16:2007/ISO/IEC 10116:2006, IDT, Ed. 3

2

Information technology - Security techniques Modes of operation for an n-bit block cipher

SANS 17:2005

1

Glass and plastics in furniture

SANS 18-1:2003/ISO/IEC 10118-1:2000, IDT, Ed. 2

1

Information technology - Security techniques - Hashfunctions Part 1: General

SANS 18-2:2003/ISO/IEC 10118-2:2000, IDT, Ed. 2

1

Information technology - Security techniques - Hashfunctions Part 2: Hash-functions using an n-bit block cipher

SANS 18-3:2007/ISO/IEC 10118-3:2004, IDT, Ed. 3

2

Information technology - Security techniques - Hashfunctions Part 3: Dedicated hash-functions

SANS 18-4:2003/ISO/IEC 10118-4:1998, IDT, Ed. 1

1

Information technology - Security techniques - Hashfunctions Part 4: Hash-functions using modular arithmetic

SANS 19:2007

1.01

The inspection, testing and examination of mobile cranes

SANS 20:2008

2.01

Primary zinc

SANS 21-1:2009/EN 115-1:2008, IDT, Ed. 1

1

Safety of escalators and moving walks Part 1: Construction and installation

SANS 22:2005

2.03

Glazed ceramic wall tiles and fittings

SANS 23-4:2003/EN 10223-4:1998, IDT, Ed. 1

1

Steel wire and wire products for fences Part 4: Steel wire welded mesh fencing

SANS 24:2008

4.01

Soft solders

(SABS 4)

(SABS 13)

(SABS 15)

(SABS 20)

(SABS 22)

(SABS 24)

Page 1

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 25:2008 (SABS 25)

2.01

Zinc alloy ingots for die-castings

SANS 26:2008

2.01

Zinc alloy die-castings

SANS 27:2008/EN 10202:2001, IDT, Ed. 2 (SABS EN 10202)

2

Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel

SANS 28:2010

4.01

Metal ties for cavity walls

SANS 29:2004 (SABS 29)

3.01

Articles made of precious metals

SANS 31:2007/EN 10204:2004, IDT, Ed. 2

2

Metallic products - Types of inspection documents

SANS 32:1997/EN 10240:1997, IDT, Ed. 1 (SABS EN 10240)

1

Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants

SANS 33:2007

1.02

Equipment for use in industrial rope access work

SANS 38:2008 (SABS 38)

3.03

Metallic naphthenates for timber preservation

SANS 39:2006/ISO 407:2004, IDT, Ed. 3

2

Small medical gas cylinders - Pin-index yoke-type valve connections

SANS 40:2009 (SABS 40)

2.03

Manually operated medium-vacuum sterilizers (autoclaves)

SANS 42:1965/ISO/R 442:1965, IDT, Ed. 1

1

Verification of pendulum impact testing machines for testing steels

SANS 43:2008/ISO 540:2008, IDT, Ed. 4 (SABS ISO 540)

2

Hard coal and coke - Determination of ash fusibility

SANS 44:2009/ISO 544:2003, IDT, Ed. 3

2

Welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerances and markings

SANS 47:2007 (SABS 47)

3.01

Coal-tar type disinfectant liquids (black and white)

SANS 49:2007

3.01

Edible gelatin

SANS 50:1998/ISO 562:1998, IDT, Ed. 2 (SABS ISO 562)

1

Hard coal and coke - Determination of volatile matter

SANS 51:2008/ISO 580:2005, IDT, Ed. 3

2

Plastics piping and ducting systems - Injectionmoulded thermoplastics fittings - Methods for visually assessing the effects of heating

SANS 52:1981/ISO 622:1981, IDT, Ed. 1 (SABS ISO 622)

1

Solid mineral fuels - Determination of phosphorus content - Reduced molybdophosphate photometric method

SANS 53:2005/ISO 636:2004, IDT, Ed. 3

2

Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and finegrain steels - Classification

(SABS 26)

(SABS 28)

(SABS EN 10204)

(SABS 1833)

(SABS ISO 407)

(SABS ISO/R 442)

(SABS ISO 544)

(SABS 49)

(SABS ISO 580)

(SABS ISO 636)

Page 2

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 54:2009/ISO 188:2007, IDT, Ed. 4

2

Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests

SANS 58:2008

2.01

Coiled wire for automatic baling machines

SANS 61-1:2009/ISO 10245-1:2008, IDT, Ed. 2

2

Cranes - Limiting and indicating devices Part 1: General

SANS 62-1:2003

3.01

Steel pipes Part 1: Pipes suitable for threading and of nominal size not exceeding 150 mm

SANS 62-2:2009 (SABS 62-2)

3.01

Steel pipes Part 2: Screwed pieces and pipe fittings of nominal size not exceeding 150 mm

SANS 63:2009

5.04

Blankets

SANS 68:2003/ISO 10282:2002, IDT, Ed. 2

1

Single-use sterile rubber surgical gloves Specification

SANS 69:2004

1

Framework for setting and implementing national ambient air quality standards

SANS 70:2004 (SABS SM 70)

3

Conditioning of textiles and standard temperate atmosphere for determining their physical and mechanical properties

SANS 71:2004

1

Inspection and testing of vehicle hoists

SANS 77:2008 (SABS 77)

3.03

Wooden handles for brooms, hay-forks, and rakes (including general requirements for other wooden handles for tools)

SANS 79:2004

4.01

Textiles - Mass per unit area of conditioned fabrics

SANS 80:2004 (SABS SM 80)

4

Mass (oven-dry plus conventional allowance) per unit area of textile fabrics, free from non-fibrous material

SANS 81:2004

3

Width of a textile fabric sample

SANS 82:2004 (SABS SM 82)

3

Width of a textile fabric in a piece or roll

SANS 83:2007

3

Length of a textile fabric sample

SANS 84:2005 (SABS SM 84)

4

Length of fabric in a piece or roll

SANS 85:2007

3

Thickness of wool fabrics

SANS 92:2008 (SABS 92)

5.01

Bituminous roofing felt

SANS 94-1:2003/EN 1492-1:2000, IDT, Ed. 1

1

Textile slings - Safety Part 1: Flat woven webbing slings, made of man-made fibres, for general purpose use

(SABS 58)

(SABS 62-1)

(SABS 63)

(SABS SM 79)

(SABS SM 81)

(SABS SM 83)

(SABS SM 85)

Page 3

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 94-2:2003/EN 1492-2:2000, IDT, Ed. 1

1

Textile slings - Safety Part 2: Roundslings, made of man-made fibres, for general purpose use

SANS 95-1:2009/EN 840-1:2004, IDT, Ed. 2

1

Mobile waste containers Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design

SANS 95-2:2009/EN 840-2:2004, IDT, Ed. 2

1

Mobile waste containers Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design

SANS 95-3:2009/EN 840-3:2004, IDT, Ed. 2

1

Mobile waste containers Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design

SANS 95-4:2009/EN 840-4:2004, IDT, Ed. 2

1

Mobile waste containers - Part 4: Containers with 4 wheels with capacity up to 1 700 l with flat lid(s), for wide trunnion or BGand/ or wide comb lifting device - Dimensions and design

SANS 95-5:2009/EN 840-5:2004, IDT, Ed. 2

1

Mobile waste containers Part 5: Performance requirements and test methods

SANS 95-6:2009/EN 840-6:2008, IDT, Ed. 2

1

Mobile waste containers Part 6: Safety and health requirements

SANS 96:2006

1

Batch sampling and acceptance criteria for explosion-protected apparatus (EPA)

SANS 98:2006

1

Ingredient labelling of cosmetic products

SANS 99:2008

3

White chalks

SANS 101:2009

1.01

White metal designated WM 6

SANS 102:2009

1.01

White metal designated WM 15

SANS 103:2009

1.01

White metal designated WM 30

SANS 104:2009

1.01

White metal designated WM 40

SANS 105-A01:1994/ISO 105-A01:1994, IDT, Ed. 5 (SABS ISO 105-A01)

1

Textiles - Tests for colour fastness Part A01: General principles of testing

SANS 105-A02:1993/ISO 105-A02:1993, IDT, Ed. 4

1

Textiles - Tests for colour fastness Part A02: Grey scale for assessing change in colour

SANS 105-A03:1993/ISO 105-A03:1993, IDT, Ed. 4 (SABS ISO 105-A03)

1

Textiles - Tests for colour fastness Part A03: Grey scale for assessing staining

SANS 105-A08:2003/ISO 105-A08:2001, IDT, Ed. 1

1

Textiles - Tests for colour fastness Part A08: Vocabulary used in colour measurement

SANS 105-B01:1994/ISO 105-B01:1994, IDT, Ed. 5 (SABS ISO 105-B01)

1

Textiles - Tests for colour fastness Part B01: Colour fastness to light: Daylight

(SABS 99)

(SABS ISO 105-A02)

Page 4

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 105-B02:1994/ISO 105-B02:1994, IDT, Ed. 4 (SABS ISO 105-B02)

1

Textiles - Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test

SANS 105-B04:1994/ISO 105-B04:1994, IDT, Ed. 4

1

Textiles - Tests for colour fastness Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test

SANS 105-B05:1993/ISO 105-B05:1993, IDT, Ed. 4 (SABS ISO 105-B05)

1

Textiles - Tests for colour fastness Part B05: Detection and assessment of photochromism

SANS 105-C10:2007/ISO 105-C10:2006, IDT, Ed. 1

1

Textiles - Tests for colour fastness Part C10: Colour fastness to washing with soap or soap and soda

SANS 105-D01:1993/ISO 105-D01:1993, IDT, Ed. 4 (SABS ISO 105-D01)

1

Textiles - Tests for colour fastness Part D01: Colour fastness to dry cleaning

SANS 105-D02:1993/ISO 105-D02:1993, IDT, Ed. 4

1

Textiles - Tests for colour fastness Part D02: Colour fastness to rubbing: Organic solvents

SANS 105-E01:1994/ISO 105-E01:1994, IDT, Ed. 4 (SABS ISO 105-E01)

1

Textiles - Tests for colour fastness Part E01: Colour fastness to water

SANS 105-E02:1994/ISO 105-E02:1994, IDT, Ed. 4

1

Textiles - Tests for colour fastness Part E02: Colour fastness to sea water

SANS 105-E03:2004/ISO 105-E03:1994, IDT, Ed. 3

1

Textiles - Tests for colour fastness Part E03: Colour fastness to chlorinated water (swimming-pool water)

SANS 105-E04:2009/ISO 105-E04:2008, IDT, Ed. 5

2

Textiles - Tests for colour fastness Part E04: Colour fastness to perspiration

SANS 105-E05:2008/ISO 105-E05:2006, IDT, Ed. 4

2

Textiles - Tests for colour fastness Part E05: Colour fastness to spotting: Acid

SANS 105-E06:2008/ISO 105-E06:2006, IDT, Ed. 4

2

Textiles - Tests for colour fastness Part E06: Colour fastness to spotting: Alkali

SANS 105-E07:2004/ISO 105-E07:1989, IDT, Ed. 3

1

Textiles - Tests for colour fastness Part E07: Colour fastness to spotting: Water

SANS 105-F01:2001/ISO 105-F01:2001, IDT, Ed. 1

1

Textiles - Tests for colour fastness Part F01: Specification for wool adjacent fabric

SANS 105-F02:2009/ISO 105-F02:2009, IDT, Ed. 1

1

Textiles - Tests for colour fastness Part F02: Specification for cotton and viscose adjacent fabrics

SANS 105-F03:2001/ISO 105-F03:2001, IDT, Ed. 1

1

Textiles - Tests for colour fastness Part F03: Specification for polyamide adjacent fabric

SANS 105-F04:2001/ISO 105-F04:2001, IDT, Ed. 1 (SABS ISO 105-F04)

1

Textiles - Tests for colour fastness Part F04: Specification for polyester adjacent fabric

SANS 105-F05:2001/ISO 105-F05:2001, IDT, Ed. 1

1

Textiles - Tests for colour fastness Part F05: Specification for acrylic adjacent fabric

SANS 105-F06:2000/ISO 105-F06:2000, IDT, Ed. 1 (SABS ISO 105-F06)

1

Textiles - Tests for colour fastness Part F06: Specification for silk adjacent fabric

SANS 105-F07:2001/ISO 105-F07:2001, IDT, Ed. 1

1

Textiles - Tests for colour fastness Part F07: Specification for secondary acetate adjacent fabric

1

Textiles - Tests for colour fastness Part F09: Specification for cotton rubbing cloth

(SABS ISO 105-B04)

(SABS ISO 105-D02)

(SABS ISO 105-E02)

(SABS ISO 105-E04)

(SABS ISO 105-F01)

(SABS ISO 105-F03)

(SABS ISO 105-F05)

(SABS ISO 105-F07) SANS 105-F09:2009/ISO 105-F09:2009, IDT, Ed. 1

Page 5

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 105-F10:1989/ISO 105-F10:1989, IDT, Ed. 1 (SABS ISO 105-F10)

1

Textiles - Tests for colour fastness Part F10: Specification for adjacent fabric: Multifibre

SANS 105-J01:2003/ISO 105-J01:1997, IDT, Ed. 4

1

Textiles - Tests for colour fastness Part J01: General principles for measurement of surface colour

SANS 105-J03:2010/ISO 105-J03:2009, IDT, Ed. 2

2

Textiles - Tests for colour fastness Part J03: Calculation of colour differences

SANS 105-N01:1993/ISO 105-N01:1993, IDT, Ed. 2

1

Textiles - Tests for colour fastness Part N01: Colour fastness to bleaching: Hypochlorite

SANS 105-X05:1994/ISO 105-X05:1994, IDT, Ed. 4 (SABS ISO 105-X05)

1

Textiles - Tests for colour fastness Part X05: Colour fastness to organic solvents

SANS 105-X11:1994/ISO 105-X11:1994, IDT, Ed. 4

1

Textiles - Tests for colour fastness Part X11: Colour fastness to hot pressing

SANS 105-X12:2006/ISO 105-X12:2002, IDT, Ed. 5 (SABS ISO 105-X12)

3

Textiles - Tests for colour fastness Part X12: Colour fastness to rubbing

SANS 105-X16:2004/ISO 105-X16:2001, IDT, Ed. 1

1

Textiles - Tests for colour fastness Part X16: Colour fastness to rubbing - Small areas

SANS 106:2009

1.01

White metal designated WM 66

SANS 107:2009

1.01

White metal designated WM 72

SANS 108:2009

1.01

White metal designated WM 80

SANS 109:2009

1.01

White metal designated WM 84

SANS 110:1973 (SABS 110)

1

Sealing compounds for the building industry, twocomponent, polysulphide base

SANS 111:2009/ISO 835:2007, IDT, Ed. 1

1

Laboratory glassware - Graduated pipettes

SANS 112:2009/ISO 648:2008, IDT, Ed. 2 (SABS ISO 648)

2

Laboratory glassware - Single volume pipettes

SANS 113:1976/ISO 383:1976, IDT, Ed. 1

1

Laboratory glassware - Interchangeable conical ground joints

SANS 114:1978/ISO 384:1978, IDT, Ed. 1 (SABS ISO 384)

1

Laboratory glassware - Principles of design and construction of volumetric glassware

SANS 115:2009/ISO 385:2005, IDT, Ed. 1

1

Laboratory glassware - Burettes

SANS 116:2007 (SABS 116)

2.01

Liquid antiseptics containing substituted phenolics

SANS 117:1975/ISO 1769:1975, IDT, Ed. 1

1

Laboratory glassware - Pipettes - Colour coding

2

Stemming for use in blasting

(SABS ISO 105-N01)

(SABS ISO 105-X11)

(SABS ISO 383)

(SABS ISO 1769) SANS 120:2009 (SABS 120)

Page 6

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 121:2000/ISO 1461:1999, IDT, Ed. 2 (SABS ISO 1461)

1.01

Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods

SANS 122:2007

1.03

Pressure-sensitive adhesive tapes for electrical purposes (Metric units)

SANS 123:1981/ISO 865:1981, IDT, Ed. 1 (SABS ISO 865)

1

Slots in platens for projection welding machines

SANS 124:2009

1.01

White metal designated WM 90

SANS 125:1997/ISO 925:1997, IDT, Ed. 3 (SABS ISO 925)

1

Solid mineral fuels - Determination of carbonate carbon content - Gravimetric method

SANS 126:1989/ISO 924:1989, IDT, Ed. 2

1

Coal preparation plant - Principles and conventions for flowsheets

SANS 128:1998/ISO 1042:1998, IDT, Ed. 4 (SABS ISO 1042)

2

Laboratory glassware - One-mark volumetric flasks

SANS 130-1:2007/ISO 1167-1:2006, IDT, Ed. 1

1

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure Part 1: General method

SANS 131:1997/ISO 1171:1997, IDT, Ed. 3

1

Solid mineral fuels - Determination of ash content

SANS 132:2009/ISO 1170:2008, IDT, Ed. 2 (SABS ISO 1170)

2

Coal and coke - Calculation of analyses to different bases

SANS 133:1993/ISO 1213-1:1993, IDT, Ed. 2

1

Solid mineral fuels - Vocabulary Part 1: Terms relating to coal preparation

SANS 135:2008/ISO 1456:2003, IDT, Ed. 3 (SABS ISO 1456)

2

Metallic coatings - Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium

SANS 136:2008/ISO 1458:2002, IDT, Ed. 3

2

Metallic coatings - Electrodeposited coatings of nickel

SANS 137:2009 (SABS 137)

1.01

Resin cored solders (non-corrosive)

SANS 138:2009

1.01

Resin cored solders (highly activated)

SANS 140-1:1997/ISO 140-1:1997, IDT, Ed. 3 (SABS ISO 140-1)

1

Acoustics - Measurement of sound insulation in buildings and of building elements Part 1: Requirements for laboratory test facilities with suppressed flanking transmission

SANS 140-2:1991/ISO 140-2:1991, IDT, Ed. 2

1

Acoustics - Measurement of sound insulation in buildings and of building elements Part 2: Determination, verification and application of precision data

1

Acoustics - Measurement of sound insulation in buildings and of building elements Part 3: Laboratory measurements of airborne sound insulation of building elements

(SABS 122)

(SABS ISO 924)

(SABS ISO 1171)

(SABS ISO 1213-1)

(SABS ISO 1458)

(SABS 138)

(SABS ISO 140-2)

SANS 140-3:1995/ISO 140-3:1995, IDT, Ed. 2 (SABS ISO 140-3)

Page 7

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 140-4:1998/ISO 140-4:1998, IDT, Ed. 2 (SABS ISO 140-4)

1

Acoustics - Measurement of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between rooms

SANS 140-5:1998/ISO 140-5:1998, IDT, Ed. 2 (SABS ISO 140-5)

1

Acoustics - Measurement of sound insulation in buildings and of building elements Part 5: Field measurements of airborne sound insulation of facade elements and facades

SANS 140-7:1998/ISO 140-7:1998, IDT, Ed. 2

1

Acoustics - Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of floors

SANS 140-8:1997/ISO 140-8:1997, IDT, Ed. 2 (SABS ISO 140-8)

1

Acoustics - Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor

SANS 140-11:2005/ISO 140-11:2005, IDT, Ed. 1

1

Acoustics - Measurement of sound insulation in buildings and of building elements Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors

SANS 140-14:2005/ISO 140-14:2004, IDT, Ed. 1

1

Acoustics - Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the field

SANS 141:2006 (SABS 141)

2.02

Glass-reinforced polyester (GRP) laminates

SANS 142:2001

2.02

Narrow elastic fabrics and strip

SANS 143:2007 (SABS 143)

3.01

Lidocaine (lignocaine) hydrochloride and noradrenaline (norepinephrine) injection for dental use

SANS 144:2008/ISO 1463:2003, IDT, Ed. 3

2

Metallic and oxide coatings - Measurement of coating thickness - Microscopical method

SANS 147:1986/ISO 1763:1986, IDT, Ed. 2 (SABS ISO 1763)

1

Carpets - Determination of number of tufts and/or loops per unit length and per unit area

SANS 148-1:2007/ISO 148-1:2006, IDT, Ed. 1

1

Metallic materials - Charpy pendulum impact test Part 1: Test method

SANS 149:2009 (SABS 149)

2.04

Absorbent cotton wool and cotton-and-viscose wool products

SANS 150:1986/ISO 1765:1986, IDT, Ed. 2

1

Machine-made textile floor coverings Determination of thickness

SANS 151:2009 (SABS 151)

6.03

Fixed electric storage water heaters

SANS 153:2006

4.08

Electric stoves, cooking tops, ovens, grills, and similar appliances

SANS 154:2005 (SABS 154)

3.03

Electric cooking plates and surface unit heaters

SANS 155:1999/ISO 1766:1999, IDT, Ed. 3

1

Textile floor coverings - Determination of thickness of pile above the substrate

(SABS ISO 140-7)

(SABS 142)

(SABS ISO 1463)

(SABS ISO 1765)

(SABS 153)

(SABS ISO 1766)

Page 8

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 156:2007 (SABS 156)

3.03

Moulded-case circuit-breakers

SANS 158:2003

4.04

Electrical appliances for heating liquids

SANS 159:2006 (SABS 159)

3.01

Electric irons for household or similar use

SANS 160:2008

3.05

Electric room heaters

SANS 161-1:1995/ISO 1873-1:1995, IDT, Ed. 4 (SABS ISO 1873-1)

1

Plastics - Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications

SANS 161-2:1997/ISO 1873-2:1997, IDT, Ed. 2

1

Plastics - Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties

SANS 162:2008/ISO 10286:2007, IDT, Ed. 3 (SABS ISO 10286)

3

Gas cylinders - Terminology

SANS 163-1:1992/ISO 10304-1:1992, IDT, Ed. 1

1

Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions Part 1: Method for water with low contamination

1

Water quality - Determination of dissolved anions by liquid chromatography of ions Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water

SANS 164-0:2007

1.01

Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 0: General and safety requirements

SANS 164-1:2007

5.01

Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 1: Conventional system, 16 A 250 V a.c.

SANS 164-2:2006 (SABS 164-2)

3

Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 2: IEC system, 16 A 250 V a.c.

SANS 164-3:2007

1.01

Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 3: Conventional system, 6 A 250 V a.c.

SANS 164-4:2007

1.01

Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 4: Dedicated system, 16 A 250 V a.c.

SANS 164-5:2007

1.01

Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 5: Twopole, non-rewirable plugs, 2,5 A 250 V a.c., with cord, for connection of class II equipment

SANS 164-6:2009

1.02

Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 6: Twopole systems, 16 A 250 V a.c., for connection of class II equipment

SANS 169:2006

2

Free alkali content and free acid content of light coloured soap products

2.01

Glassware and equipment for microbiological tests

(SABS 158)

(SABS 160)

(SABS ISO 1873-2)

(SABS ISO 10304-1)

SANS 163-2:1995/ISO 10304-2:1995, IDT, Ed. 1 (SABS ISO 10304-2)

(SABS 164-1)

(SABS SM 184) SANS 171:2009 (SABS SM 552)

Page 9

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 174:1992/ISO 1513:1992, IDT, Ed. 3 (SABS ISO 1513)

1

Paints and varnishes - Examination and preparation of samples for testing

SANS 175:2006/ISO 1514:2004, IDT, Ed. 4

2

Paints and varnishes - Standard panels for testing

SANS 176:1973/ISO 1517:1973, IDT, Ed. 1 (SABS ISO 1517)

1

Paints and varnishes - Surface-drying test - Ballotini method

SANS 177:2004/ISO 1519:2002, IDT, Ed. 2

2

Paints and varnishes - Bend test (cylindrical mandrel)

SANS 178:2006/ISO 1524:2000, IDT, Ed. 3 (SABS ISO 1524)

2

Paints, varnishes and printing inks - Determination of fineness of grind

SANS 179:2007

2.01

Mutton cloth

SANS 180:2004 (SABS 180)

3.01

Primary cells and batteries

SANS 181:2004

3

Thermostats for electric storage water heaters

SANS 182-1:2008 (SABS 182-1)

1.02

Conductors for overhead electrical transmission lines Part 1: Copper wires and stranded copper conductors

SANS 182-2:2008

1.04

Conductors for overhead electrical transmission lines Part 2: Stranded aluminium conductors

SANS 182-3:2003 (SABS 182-3)

1.05

Conductors for overhead electrical transmission lines Part 3: Aluminium conductors, steel reinforced

SANS 182-4:2008

1.02

Conductors for overhead electrical transmission lines Part 4: Copper-covered steel wire for telecommunication purposes

SANS 182-5:2008 (SABS 182-5)

1.03

Conductors for overhead electrical transmission lines Part 5: Zinc-coated steel wires for conductors and stays

SANS 183:2007

2.01

The production of sorghum beer

SANS 184:1973 (SABS SM 667)

1

The determination of peeling load of direct moulded footwear

SANS 185:2005

3.02

Immersion-type heating units for electrical appliances

SANS 186:2003 (SABS 186)

3.01

Energy regulators for electric heating units

SANS 187:2007

1.03

Butyl rubber sheet (for waterproofing)

SANS 189:2006 (SABS 189)

4.01

Short-link steel chain (medium-tolerance) for lifting purposes

SANS 190-1:2008

2.01

Expanded metal Part 1: Sheets and plates

(SABS ISO 1514)

(SABS ISO 1519)

(SABS 179)

(SABS 181)

(SABS 182-2)

(SABS 182-4)

(SABS 183)

(SABS 185)

(SABS 187)

(SABS 190-1)

Page 10

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 190-2:2008 (SABS 190-2)

1.02

Expanded metal Part 2: Building products

SANS 191:2008

2.01

Cast steel gate valves

SANS 192:1978 (SABS SM 822)

1

Pesticides: Biological evaluation of the efficacy of molluscicides

SANS 193:2004

2.01

Fire dampers

SANS 194:2006 (SABS SM 826)

3

Pesticides: Foaming of wettable powders and suspension concentrates

SANS 195:2006

2.01

Sampling of aggregates

SANS 196:2007 (SABS 196)

3

Orthopaedic padding

SANS 197:2006

2.01

Preparation of test samples of aggregates

SANS 198:2009 (SABS 198)

4.02

Functional-control valves and safety valves for domestic hot and cold water supply systems

SANS 199:2009

2

Shut-off valves for refillable liquefied petroleum gas cylinders

SANS 200:2008 (SABS 200)

3.03

Copper alloy ingots and castings

SANS 201:2008

2.02

Sieve analysis, fines content and dust content of aggregates

SANS 202:2006 (SABS SM 830)

2

Chloride content of aggregates

SANS 203:2007

2

Bactericidal and algaecidal efficacy of swimming pool chemicals

SANS 204-1:2008

1

Energy efficiency in buildings Part 1: General requirements

SANS 204-2:2008

1

Energy efficiency in buildings Part 2: The application of the energy efficiency requirements for buildings with natural environmental control

SANS 204-3:2008

1

Energy efficiency in buildings Part 3: The application of the energy efficiency requirements for buildings with artificial ventilation or air conditioning

SANS 205:2009/ISO 6118:2006, IDT, Ed. 2

2

Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a nonpetroleum base hydraulic brake fluid (service temperature 70 °C max.)

SANS 206:2009/ISO 6119:2006, IDT, Ed. 2

2

Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)

SANS 207:2006

1

The design and construction of reinforced soils and fills

(SABS 191)

(SABS 193)

(SABS SM 827)

(SABS SM 828)

(SABS 199)

(SABS SM 829)

(SABS SM 1158)

Page 11

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 208:2005

1

The design and installation of compressed natural gas (CNG) vehicle filling stations

SANS 211:2009/CISPR 11:2009, IDT, Ed. 5

4

Industrial, scientific and medical equipment - Radiofrequency disturbance characteristics - Limits and methods of measurement

SANS 212:2009/CISPR 12:2009, IDT, Ed. 6.1 (SABS CISPR 12)

4.01

Vehicles, boats, and internal combustion engines Radio disturbance characteristics - Limits and methods of measurement for the protection of offboard receivers

SANS 213:2006/CISPR 13:2006, IDT, Ed. 4.2 (SABS CISPR 13)

3.02

Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

SANS 214-1:2009/CISPR 14-1:2009, IDT, Ed. 5.1

3.01

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1: Emission

SANS 214-2:2009/CISPR 14-2:2008, IDT, Ed. 1.2 (SABS CISPR 14-2)

1.02

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 2: Immunity - Product family standard

SANS 215:2009/CISPR 15:2009, IDT, Ed. 7.2 (SABS CISPR 15)

4.02

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

SANS 216-1-1:2008/CISPR 16-1-1:2007, IDT, Ed. 2.2 2.02

Specification for radio disturbance and immunity measuring apparatus and methods Part 1-1: Radio disturbance and immunity measuring apparatus Measuring apparatus

SANS 216-1-2:2007/CISPR 16-1-2:2006, IDT, Ed. 1.2 1.02

Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus Ancillary equipment - Conducted disturbances

SANS 216-1-3:2005/CISPR 16-1-3:2004, IDT, Ed. 2

Specification for radio disturbance and immunity measuring apparatus and methods Part 1-3: Radio disturbance and immunity measuring apparatus Ancillary equipment - Disturbance power

(SABS CISPR 11)

(SABS CISPR 14-1)

2

SANS 216-1-4:2008/CISPR 16-1-4:2008, IDT, Ed. 2.1 2.01

Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus Ancillary equipment - Radiated disturbances

SANS 216-1-5:2004/CISPR 16-1-5:2003, IDT, Ed. 1

1

Specification for radio disturbance and immunity measuring apparatus and methods Part 1-5: Radio disturbance and immunity measuring apparatus Antenna calibration test sites for 30 MHz to 1 000 MHz

SANS 216-2-1:2009/CISPR 16-2-1:2008, IDT, Ed. 2

2

Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

SANS 216-2-2:2006/CISPR 16-2-2:2005, IDT, Ed. 1.2 1.02

Specification for radio disturbance and immunity measuring apparatus and methods Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power

SANS 216-2-3:2007/CISPR 16-2-3:2006, IDT, Ed. 2

Specification for radio disturbance and immunity measuring apparatus and methods Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

2

Page 12

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 216-2-4:2004/CISPR 16-2-4:2003, IDT, Ed. 1

1

Specification for radio disturbance and immunity measuring apparatus and methods Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements

SANS 216-3:2005/CISPR/TR 16-3:2003, IDT, Ed. 2

1

Specification for radio disturbance and immunity measuring apparatus and methods Part 3: CISPR technical reports

SANS 216-4-1:2009/CISPR/TR 16-4-1:2009, IDT, Ed. 2 2

Specification for radio disturbance and immunity measuring apparatus and methods Part 4-1: Uncertainties, statistics and limit modelling Uncertainties in standardized EMC tests

1

Specification for radio disturbance and immunity measuring apparatus and methods Part 4-2: Uncertainties, statistics and limit modelling Uncertainty in EMC measurements

SANS 216-4-2:2004/CISPR 16-4-2:2003, IDT, Ed. 1

SANS 216-4-3:2007/CISPR/TR 16-4-3:2007, IDT, Ed. 2.01 2.1

Specification for radio disturbance and immunity measuring apparatus and methods Part 4-3: Uncertainties, statistics and limit modelling Statistical considerations in the determination of EMC compliance of mass-produced products

SANS 216-4-4:2008/CISPR/TR 16-4-4:2007, IDT, Ed. 2 2

Specification for radio disturbance and immunity measuring apparatus and methods Part 4-4: Uncertainties, statistics and limit modelling Statistics of complaints and a model for the calculation of limits for the protection of radio services

SANS 218-1:2005/CISPR 18-1:1982, IDT, Ed. 1

1

Radio interference characteristics of overhead power lines and high-voltage equipment Part 1: Description of phenomena

SANS 218-2:2005/CISPR 18-2:1986, IDT, Ed. 1

1

Radio interference characteristics of overhead power lines and high-voltage equipment Part 2: Methods of measurement and procedure for determining limits

SANS 218-3:2005/CISPR 18-3:1986, IDT, Ed. 1

1

Radio interference characteristics of overhead power lines and high-voltage equipment Part 3: Code of practice for minimizing the generation of radio noise

SANS 219:2005/CISPR 19:1983, IDT, Ed. 1

1

Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz

SANS 220:2009

3.02

Dissolved acetylene cylinders

SANS 222:2009/CISPR 22:2008, IDT, Ed. 6 (SABS CISPR 22)

6

Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

SANS 223:2006

3.01

Writing equipment - Coloured chalks and pastels

SANS 224:1997/CISPR 24:1997, IDT, Ed. 1 (SABS CISPR 24)

1

Information technology equipment - Immunity characteristics - Limits and methods of measurement

SANS 225:2008/CISPR 25:2008, IDT, Ed. 3

2

Vehicles, boats and internal combustion engines Radio disturbance characteristics - Limits and methods of measurement for the protection of onboard receivers

SANS 226:2009

5.02

Water taps (metallic bodies)

(SABS 220)

(SABS 223)

(SABS 226)

Page 13

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 227:2007 (SABS 227)

4.04

Burnt clay masonry units

SANS 228:2007

4

Absorbent cotton wool

SANS 232:2003 (SABS 232)

3.02

Detergent for industrial dishwashing equipment

SANS 235:2008

3

General purpose pure soap

SANS 236:2008 (SABS 236)

3

Filled bar soap

SANS 237:2008

3

Toilet soap

SANS 238:2008 (SABS 238)

3

Liquid toilet soap

SANS 240:2008

3

Carbolic soap

SANS 241:2006 (SABS 241)

6.01

Drinking water

SANS 242:2003

5

Stainless steel sinks with draining boards (for domestic use)

SANS 244:1978 (SABS 244)

2

Wax crayons

SANS 246:2004/BS 6266:2002, IDT, Ed. 3

1

Code of practice for fire protection for electronic equipment installations

SANS 248:2007 (SABS 248)

3.01

Bituminous damp-proof courses

SANS 250:2003/ISO 10012:2003, IDT, Ed. 1

1

Measurement management systems - Requirements for measurement processes and measuring equipment

SANS 251:2006 (SABS 251)

5

Long-link and extra-long-link medium tolerance steel chains for general purposes

SANS 252:2003/BS 4089:1999, IDT, Ed. 3

1

Metallic hose assemblies for liquid petroleum gases and liquefied natural gases

SANS 254:2010/ISO 5010:2007, IDT, Ed. 3

2

Earth-moving machinery - Rubber-tyred machines Steering requirements

SANS 255:2010/ISO 10265:2008, IDT, Ed. 2

2

Earth-moving machinery - Crawler machines Performance requirements and test procedures for braking systems

SANS 256:2004 (SABS 256)

2.01

Liquid furniture polish (non-wax emulsion type)

SANS 257:2008

2.03

Wax shoe polish

(SABS 228)

(SABS 235)

(SABS 237)

(SABS 240)

(SABS 242)

(SABS 257)

Page 14

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 258:2008 (SABS 258)

2.04

Wax stoep polish

SANS 259:2008/ISO 5006:2006, IDT, Ed. 1

1

Earth-moving machinery - Operator's field of view Test method and performance criteria

SANS 261:2008/ISO 6165:2006, IDT, Ed. 5

2

Earth-moving machinery - Basic types - Identification and terms and definitions

SANS 265:2005

3.01

Gummed paper tape (Metric units)

SANS 266:2003 (SABS 266)

5.01

Gypsum plasterboard

SANS 267:2005

1

Technical requirements for telex CPE terminals intended for connection to the public telex network

SANS 271:2005/ISO 6224:2005, IDT, Ed. 3

2

Thermoplastics hoses, textile-reinforced, for generalpurpose water applications - Specification

SANS 272:2005/ISO 1403:2005, IDT, Ed. 4

2

Rubber hoses, textile-reinforced, for generalpurpose water applications - Specification

SANS 273:2007

1

The design, manufacture, maintenance and safe operation of chairlifts in mines

SANS 274:2004/ISO 10006:2003, IDT, Ed. 2

1

Quality management systems - Guidelines for quality management in projects

SANS 275:2004/EN 12083:1998, IDT, Ed. 1

1

Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) Particle filters, gas filters, and combined filters Requirements, testing, marking

SANS 277:2004/EN 12021:1998, IDT, Ed. 1

1

Respiratory protective devices - Compressed air for breathing apparatus

SANS 278:2004/EN 12419:1999, IDT, Ed. 1

1

Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a full face mask, half mask or quarter mask - Requirements, testing, marking

SANS 279:2004/ISO 1518:1992, IDT, Ed. 2

1

Paints and varnishes - Scratch test

SANS 280:2008

2.01

Hole location in fencing posts and droppers

SANS 282:2004 (SABS 82)

5.01

Bending dimensions and scheduling of steel reinforcement for concrete

SANS 284:2004

2.04

Spades and shovels

SANS 285:2010 (SABS 285)

3.01

Calcium silicate masonry units

SANS 286-1:1988/ISO 286-1:1988, IDT, Ed. 1

1

ISO system of limits and fits Part 1: Bases of tolerances, deviations and fits

1

ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

(SABS 265)

(SABS 280)

(SABS 284)

(SABS ISO 286-1) SANS 286-2:1988/ISO 286-2:1988, IDT, Ed. 1 (SABS ISO 286-2)

Page 15

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 288:2000 (SABS 288)

1.06

Anti-bacterial liquid toilet soap for medical use

SANS 289:2008

1.02

Labelling requirements for prepackaged products (prepackages) and general requirements for the sale of goods subject to legal metrology control

SANS 290:2007

1

Mineral insulating oils - Management of polychlorinated biphenyls (PCBs)

SANS 291:2003/ISO 291:1997, IDT, Ed. 2

1

Plastics - Standard atmospheres for conditioning and testing

SANS 292:1975 (SABS 292)

2

Wooden handles for hammers

SANS 294:2004

1

Construction procurement processes, methods and procedures

SANS 295:2007 (SABS 295)

3

Calcium hypochlorite

SANS 296:2008

5.01

Sodium hypochlorite solutions

SANS 297:2009 (SABS 297)

3.01

Mastic asphalt for roofing

SANS 298:2007

3.01

Mastic asphalt for damp-proof courses and tanking

SANS 301-12:2004/BS 1722-12:1999, IDT, Ed. 3

1

Fences Part 12: Specification for steel palisade fences

SANS 302:2005

1

Non-automatic, undenominated beam scales and balances subject to legal metrology control

SANS 303:2005

1

Non-automatic, non-self-indicating or semi-selfindicating, ungraduated counter scales subject to legal metrology control

SANS 304:2008

3.01

Linen threads for footwear

SANS 305:2007

1

Winged infusion sets (sterile-packed for single use)

SANS 306-4:2003/BS 5306-4:2001, IDT, Ed. 3

1

Fire extinguishing installations and equipment on premises Part 4: Specification for carbon dioxide systems

SANS 307:2005 (SABS 307)

3.07

Penetration grade bitumens

SANS 308:2009

2.02

Cutback bitumen (Metric units)

SANS 309:2004 (SABS 309)

3.03

Anionic bitumen road emulsions

SANS 310-1:2007

1

Storage tank facilities for hazardous chemicals Part 1: Above-ground storage tank facilities for nonflammable chemicals

(SABS 296)

(SABS 298)

(SABS 304)

(SABS 308)

Page 16

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 311:2007

2

Category L motor vehicles

SANS 313:2004/ISO 6222:1999, IDT, Ed. 2

1

Water quality - Enumeration of culturable microorganisms - Colony count by inoculation in a nutrient agar culture medium

SANS 314:2005/ISO 707:1997, IDT, Ed. 2

1

Milk and milk products - Guidance on sampling

SANS 315:2005/ISO 1211:1999, IDT, Ed. 2

1

Milk - Determination of fat content - Gravimetric method (Reference method)

SANS 316:2002 (SABS 316)

3.01

Industrial hand protectors (leather and fabric) and leather protective clothing

SANS 317:2007

2.05

Industrial bitumens

SANS 318:2005/ISO 1736:2000, IDT, Ed. 3

1

Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method)

SANS 319:2008/OIML R 125:1998, MOD

1

Measuring systems - Cryogenic liquids and other selected liquid gases in vertical tanks - Pressure differential method

SANS 320:2008 (SABS 320)

4

The production of men's heavy boots, service type (Goodyear welted)

SANS 321:2008

4

The production of men's boots (Goodyear welted, with stitched or stuck-on outer soles)

SANS 322:2005

1

Fire detection and alarm systems for hospitals

SANS 325:2004/ISO/TR 10017:2003, IDT, Ed. 2

1

Guidance on statistical techniques for SANS 9001:2000

SANS 326:2004/ISO/IEC 20060:2001, IDT, Ed. 1

1

Information technology - Open Terminal Architecture (OTA) specification - Virtual machine specification

SANS 327:2007

1

Over-needle peripheral catheters (sterile-packed for single use)

SANS 329:2008

1

Industrial thermoprocessing equipment - Safety requirements for combustion and fuel-handling systems

SANS 331:2005

1

Fire extinguishing aerosol systems

SANS 332:2004/ETSI TBR 38:1998, IDT, Ed. 1

1

Public Switched Telephone Network (PSTN); Attachment requirements for a terminal equipment incorporating an analogue handset function capable of supporting the justified case service when connected to the analogue interface of the PSTN in Europe

SANS 333:1996/ISO 333:1996, IDT, Ed. 4

1

Coal - Determination of nitrogen - Semi-micro Kjeldahl method

1

Solid mineral fuels - Determination of total sulfur Eschka method

(SABS 317)

(SABS 321)

(SABS ISO 333) SANS 334:1992/ISO 334:1992, IDT, Ed. 2 (SABS ISO 334)

Page 17

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 336:2005/ETSI TBR 21:1998, MOD, Ed. 1

2

Terminal Equipment (TE); Attachment requirements for pan-European approval for connection to the analogue Public Switched Telephone Networks (PSTNs) of TE (excluding TE supporting the voice telephony service) in which network addressing, if provided, is by means of Dual Tone Multi Frequency (DTMF) signalling

SANS 337:2005

1

Stove couplers

SANS 339:2007

1

Sorbents for hydrocarbon-based products

SANS 340:2006/ISO 340:2004, IDT, Ed. 3

2

Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method

SANS 341:2007

4.02

Picks, beater picks and mattocks

SANS 342:2006 (SABS 342)

4

Automotive diesel fuel

SANS 343:2004

4.02

Steel bedside lockers

SANS 344:2005/OIML R81:1998, NEQ

1

Dynamic measuring devices and systems for cryogenic liquids

SANS 346:2008

5.01

Woven worsted fabrics

SANS 347:2010

1.01

Categorization and conformity assessment criteria for all pressure equipment

SANS 348:2006

1

Safety surgical scalpels, sterile packed for singleuse

SANS 349:1975/ISO 349:1975, IDT, Ed. 1 (SABS ISO 349)

1

Hard coal - Audibert-Arnu dilatometer test

SANS 350-1:2005/ISO 1132-1:2000, IDT, Ed. 1

1

Rolling bearings - Tolerances Part 1: Terms and definitions

SANS 350-2:2005/ISO 1132-2:2001, IDT, Ed. 1

1

Rolling bearings - Tolerances Part 2: Measuring and gauging principles and methods

SANS 351:2007/ISO 76:2006, IDT, Ed. 3

2

Rolling bearings - Static load ratings

SANS 352:2005/ISO 104:2002, IDT, Ed. 3

1

Rolling bearings - Thrust bearings - Boundary dimensions, general plan

SANS 353:2005/ISO 113:1999, IDT, Ed. 2

1

Rolling bearings - Plummer block housings Boundary dimensions

SANS 354:2005/ISO 281:1990, IDT, Ed. 1

1

Rolling bearings - Dynamic load ratings and rating life

SANS 355:2005/ISO 355:1977, IDT, Ed. 1

1

Rolling bearings - Metric tapered roller bearings Boundary dimensions and series designations

(SABS 341)

(SABS 343)

(SABS 346)

Page 18

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 356:2005/ISO 492:2002, IDT, Ed. 4

1

Rolling bearings - Radial bearings - Tolerances

SANS 357-17:2005/ISO 683-17:1999, IDT, Ed. 2

1

Heat-treated steels, alloy steels and free-cutting steels Part 17: Ball and roller bearing steels

SANS 358:2005/ISO 1224:1984, IDT, Ed. 1

1

Rolling bearings - Instrument precision bearings

SANS 359:2005/ISO 5753:1991, IDT, Ed. 2

1

Rolling bearings - Radial internal clearance

SANS 360:2005/ISO 7063:2003, IDT, Ed. 2

1

Rolling bearings - Needle roller bearing track rollers - Boundary dimensions and tolerances

SANS 361:2005/ISO 10317:1992, IDT, Ed. 1

1

Rolling bearings - Metric tapered roller bearings Designation system

SANS 363:2007/ISO 10129:2006, IDT, Ed. 1

2

Plain bearings - Testing of bearing metals Resistance to corrosion by lubricants under static conditions

SANS 364:2005/ISO 6045:1987, IDT, Ed. 1

1

Shipbuilding and marine structures - Bearings for derrick goosenecks - Assemblies and components

SANS 365:2005/ISO 6279:1979, IDT, Ed. 1

1

Plain bearings - Aluminium alloy for solid bearings

SANS 366:2005/ISO 6280:1981, IDT, Ed. 1

1

Plain bearings - Requirements on backings for thickwalled multilayer bearings

SANS 367:2005/ISO 6282:1983, IDT, Ed. 1

1

Plain bearings - Metallic thin-walled half bearings Determination of the sigma 0,01*-limit

SANS 368:2008

1.01

Aloe raw material

SANS 369-1:2004/BS 7273-1:2000, IDT, Ed. 2

1

Code of practice for the operation of fire protection measures Part 1: Electrical actuation of gaseous total flooding extinguishing systems

SANS 369-2:2004/BS 7273-2:1992, IDT, Ed. 1

1

Code of practice for the operation of fire protection measures Part 2: Mechanical actuation of gaseous total flooding and local application extinguishing systems

SANS 370:2009

1.01

Steel mesh reinforced polyethylene (PE) pipes for water supply

SANS 371:2009

1.01

Steel mesh reinforced polyethylene (PE) pipe fittings for water supply

SANS 373-1:2009

2

Reprocessing of endoscopes Part 1: Flexible endoscopes and accessories

SANS 373-2:2009

1

Reprocessing of endoscopes Part 2: Rigid endoscopes, associated components and accessories

SANS 374:2005/ASTM D 512:2004, IDT

1

Standard test methods for chloride ion in water

SANS 375:2005/ASTM D 1889:2000, IDT

1

Standard test method for turbidity of water

Page 19

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 376:2005/ASTM D 2972:2003, IDT

1

Standard test methods for arsenic in water

SANS 377:2005/ASTM D 3859:2003, IDT

1

Standard test methods for selenium in water

SANS 379:2005/ASTM D 3697:2002, IDT

1

Standard test method for antimony in water

SANS 381:2007/ASTM D 857:2002, IDT

1

Standard test method for aluminium in water

SANS 382:2007/ASTM D 1068:2005, IDT

1

Standard test methods for iron in water

SANS 383:2007/ASTM D 1691:2002, IDT

1

Standard test methods for zinc in water

SANS 384:2007/ASTM D 3559:2003, IDT

1

Standard test methods for lead in water

SANS 385:2006

4

Fabric linings for footwear

SANS 387:2008 (SABS 387)

2.06

Hammer heads and hand hammers

SANS 388:2007

2.01

Commercial dextrose and liquid glucose

SANS 389:2007 (SABS 389)

2.01

Commercial lactose

SANS 390:2008

3.05

Forks and rakes

SANS 391:2004/ISO 5576:1997, IDT, Ed. 1

1

Non-destructive testing - Industrial X-ray and gamma-ray radiology - Vocabulary

SANS 392:2008

2.03

Filler rods for braze welding

SANS 393:2004/ISO 5577:2000, IDT, Ed. 1

1

Non-destructive testing - Ultrasonic inspection Vocabulary

SANS 394:2004/ISO 5579:1998, IDT, Ed. 2

1

Non-destructive testing - Radiographic examination of metallic materials by X- and gamma-rays - Basic rules

SANS 395:2004/ISO 5580:1985, IDT, Ed. 1

1

Non-destructive testing - Industrial radiographic illuminators - Minimum requirements

SANS 396:2004/ISO 10375:1997, IDT, Ed. 1

1

Non-destructive testing - Ultrasonic inspection Characterization of search unit and sound field

SANS 398-3:2005/BS 1139-3:1994, IDT, Ed. 2

1

Scaffolding Part 3: Specification for prefabricated mobile access and working towers - (Implementation of HD 1004)

SANS 399:2005

1

Transportable refillable welded stainless steel cylinders for low pressure gases - Alternative design and construction

(SABS 385)

(SABS 388)

(SABS 390)

(SABS 392)

Page 20

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 401:2005/ASTM D440:1986, IDT

1

Standard test method of drop shatter test for coal

SANS 402:2005/ISO 157:1996, IDT, Ed. 2

1

Coal - Determination of forms of sulfur

SANS 403:2005/ISO 1018:1975, IDT, Ed. 1

1

Hard coal - Determination of moisture-holding capacity

SANS 404:2009

2.02

Phosphorus deoxidized non-arsenical copper

SANS 405:2009 (SABS 405)

2.02

Phosphorus deoxidized arsenical copper

SANS 406:2006/AS 1038.10.0:2002, MOD

1

Coal and coke - Analysis and testing - Determination of trace elements - Guide to the determination of trace elements

SANS 407:2008 (SABS 407)

3.02

Austenitic manganese steel castings

SANS 408:2007/AS 1038.14.3:1999, MOD

1

Coal and coke - Analysis and testing - Higher rank coal ash and coke ash - Major and minor elements Wavelength dispersive X-ray fluorescence spectrometric method

SANS 409:2006/AS 1038.10.1:2003, MOD

1

Coal and coke - Analysis and testing - Determination of trace elements - Coal, coke and fly-ash Determination of eleven trace elements - Flame atomic absorption spectrometric method

SANS 411:2006/AS 1038.10.2:1998, MOD

1

Coal and coke - Analysis and testing - Determination of trace elements - Determination of arsenic, antimony and selenium - Hydride generation method

SANS 412:2006/AS 1038.10.3:1988, MOD

1

Coal and coke - Analysis and testing - Determination of trace elements - Determination of boron content ICP-AES method

SANS 414:2006/AS 1038.14.2:2003, MOD

1

Coal and coke - Analysis and testing - Higher rank coal ash and coke ash - Major and minor elements Acid digestion/flame atomic absorption spectrometric method

SANS 416:2007 (SABS 416)

2.05

Chemical resistant gloves

SANS 417:2006

3.04

Stainless steelware for medical and catering services in institutions

SANS 419:2007 (SABS 419)

2.01

E glass fibre chopped strand mat for reinforcement of polyester and other liquid laminating systems

SANS 420:2007

2.01

Canners' sucrose

SANS 421:2008 (SABS 421)

5

The production of men's shoes (Goodyear welted with stitched or stuck-on outer soles)

SANS 422:2008

5

Hospital nurses' shoes (Goodyear welted construction)

1

Terminology work - Vocabulary Part 1: Theory and application

(SABS 404)

(SABS 417)

(SABS 420)

(SABS 422) SANS 427-1:2006/ISO 1087-1:2000, IDT, Ed. 1

Page 21

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 427-2:2006/ISO 1087-2:2000, IDT, Ed. 1

1

Terminology work - Vocabulary Part 2: Computer applications

SANS 428:2007

1.01

Fire performance classification of thermal insulated building envelope systems

SANS 429:2005/ISO/TR 6281:1990, IDT, Ed. 1

1

Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs Guidelines

SANS 430:2005/ISO 10019:2005, IDT, Ed. 1

1

Guidelines for the selection of quality management system consultants and use of their services

SANS 431:2007 (SABS 431)

2.01

Liners and fluting for corrugated board

SANS 432:2007

3.01

Indelible marking ink for textile fabrics

SANS 433:2008 (SABS 433)

2

Barrier creams

SANS 434:2008

4.02

Boiler suits and workwear suits

SANS 438:2005/ISO 999:1996, IDT, Ed. 2

1

Information and documentation - Guidelines for the content, organization and presentation of indexes

SANS 440:2008

5

Sterilized water for injections

SANS 441:2006

1

Timber preservative - Mixture of azoles and permethrin

SANS 443:2006

3

White open-wove bandages

SANS 445:2005/ISO 15:1998, IDT, Ed. 2

1

Rolling bearings - Radial bearings - Boundary dimensions, general plan

SANS 446:2010

4.01

Absorbent gauze (fabric and swabs) and butter muslin

SANS 448:2010

1

Ethanol gel for cooking and other gel burning appliances

SANS 449:2009

4.01

The manufacture of soft drinks and soft drink concentrates

SANS 450:2005/ISO 6058:1984, IDT, Ed. 1

1

Water quality - Determination of calcium content EDTA titrimetric method

SANS 451:2008

1

Spirometry - Generation of acceptable and repeatable spirograms

SANS 452:2008

1

Non-reusable and reusable sharps containers

SANS 453:2005/ISO 6059:1984, IDT, Ed. 1

1

Water quality - Determination of the sum of calcium and magnesium - EDTA titrimetric method

SANS 455:2009 (SABS 455)

4.04

Covered electrodes for the manual arc welding of carbon and carbon manganese steels

(SABS 432)

(SABS 434)

(SABS 440)

(SABS 443)

(SABS 446)

(SABS 449)

Page 22

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 456:2009 (SABS 456)

2.04

Corrugated board containers

SANS 457-2:2008

6.02

Wooden poles, droppers, guardrail posts and spacer blocks Part 2: Softwood species

SANS 457-3:2000 (SABS 457-3)

6

Wooden poles, droppers, guardrail posts and spacer blocks Part 3: Hardwood species

SANS 458:2008

1.01

Tolerances permitted for the accuracy of measurements of products (including prepackaged products) in terms of legal metrology legislation

SANS 459:2008 (SABS 459)

1.05

Lime for chemical and metallurgical purposes

SANS 460:2009

4.01

Plain-ended solid drawn copper tubes for potable water

SANS 462:2005/ASTM A 974:1997, IDT, Ed. 1

1

Welded wire fabric gabions and gabion mattresses (Metallic-coated or polyvinyl chloride (PVC) coated)

SANS 465:2005/ASTM D4806-04a:2004, IDT

1

Standard specification for denatured fuel ethanol for blending with gasolines for use as automotive sparkignition engine fuel

SANS 466:2005/ISO 10005:2005, IDT, Ed. 2

1

Quality management systems - Guidelines for quality plans

SANS 467:2005/EN 50148:1995, IDT, Ed. 1

1

Electronic taximeters

SANS 468:2007 (SABS SM 468)

3.01

Breaking strength and extension at break of textile fabrics: narrow strip method using constant rate of traverse

SANS 469:2006

3

Absorbent cotton lint

SANS 470:2003 (SABS 470)

4

Concrete poles for telephone, power and lighting purposes

SANS 471:2003/ISO 471:1995, IDT, Ed. 3

1

Rubber - Temperatures, humidities and times for conditioning and testing

SANS 472:2006/EN 300:1997, IDT, Ed. 1

1

Oriented Strand Boards (OSB) - Definitions, classification and specifications

SANS 473:2006/NRS 071:2004, IDT, Ed. 1

1

Automated meter reading for large power users

SANS 474:2009/NRS 057:2009, IDT, Ed. 1.1

1.01

Code of practice for electricity metering

SANS 475:2006

1

Luminaires for interior lighting, streetlighting and floodlighting - Performance requirements

SANS 476:2007/ISO 6055:2004, IDT, Ed. 3

1

Industrial trucks - Overhead guards - Specification and testing

SANS 477:2009/ISO 6292:2008, IDT, Ed. 2

2

Powered industrial trucks and tractors - Brake performance and component strength

(SABS 457-2)

(SABS 460)

(SABS 469)

Page 23

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 478:2007/EN 1493:1998, IDT, Ed. 1

1

Vehicle lifts

SANS 479:2006/ISO 5738:2004, IDT, Ed. 2

1

Milk and milk products - Determination of copper content - Photometric method (Reference method)

SANS 480:2006/ISO 11108:1996, IDT, Ed. 1

1

Information and documentation - Archival paper Requirements for permanence and durability

SANS 481:2007

3

Accelerated weathering of textiles - Artificial light and water spray exposure method

SANS 484-1:2009

1

Conveyor belting - Step splicing for multi-ply textilereinforced rubber covered conveyor belting Part 1: Hot-splicing method

SANS 484-2:2009

1

Conveyor belting - Step splicing for multi-ply textilereinforced rubber covered conveyor belting Part 2: Cold-splicing method

SANS 485:2009

1

Conveyor belting - Splicing of steel cord reinforced conveyor belting

SANS 486:2009

1

Conveyor belting - Finger splicing of solid woven construction conveyor belting

SANS 489:2009

1

Good Manufacturing Practice in the animal feed industry

SANS 490:2008

1

Disinfectant alcohol-based handrub

SANS 491:1996 (SABS 491)

3

Wooden crutches

SANS 492-1:2002

2.02

Protective and safety gum boots Part 1: Handmade rubber gum boots

SANS 492-2:2003 (SABS 492-2)

3

Protective and safety gum boots Part 2: Moulded rubber gum boots

SANS 492-3:1983

1

Protective and safety gum boots Part 3: Handmade rubber ankle boots for men

SANS 492-4:1983 (SABS 492-4)

1

Protective and safety gum boots Part 4: Moulded rubber ankle boots for men

SANS 493:2009

2.01

Steel refuse bins

SANS 494-1:2008

1

Surgical medical devices used for wound closure Part 1: Sterile sutures and ligatures

SANS 495:2005

3.03

Cotton duck

SANS 497:2006 (SABS 497)

4.02

Glazed ceramic sanitaryware

SANS 498:2007

1

Replacement of wheel rims for commercial vehicles and their trailers

(SABS SM 481)

(SABS 492-1)

(SABS 492-3)

(SABS 493)

(SABS 495)

Page 24

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 499:2006/ISO 487:1998, IDT, Ed. 3

1

Steel roller chains, types S and C, attachments and sprockets

SANS 500:2009

1

Inspection, examination and testing of manually operated chain blocks and chain lever hoists in use

SANS 501:2008/ISO 501:2003, IDT, Ed. 3 (SABS ISO 501)

2

Hard coal - Determination of the crucible swelling number

SANS 502:1982/ISO 502:1982, IDT, Ed. 2

1

Coal - Determination of caking power - Gray-King coke test

SANS 504:2008

1

Intelligent Transport Systems - Radio-frequency identification of vehicles - Parameters for unidirectional air interface communication

SANS 505:2003/BS 7505:1995, MOD, Ed. 1

1

Specification for the elastic properties of flat, nonadhesive, extensible fabric bandages

SANS 506:2008

1

Timber preservative - Alkaline-copper-quaternary type

SANS 507-1:2007/NRS 034-1:2007, IDT, Ed. 4

1

Electricity distribution - Guidelines for the provision of electricity distribution networks in residential areas Part 1: Planning and design of distribution networks

SANS 508:2008

1

Concrete retaining blocks

SANS 509:2007/ISO 509:1996, IDT, Ed. 1

1

Pallet trucks - Principal dimensions

SANS 510:2007/ISO 6120:1995, IDT, Ed. 2

1

Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid

SANS 513:2005 (SABS 513)

3.04

Retro-reflectors (reflex reflectors)

SANS 514:2009

3.04

Immersion heaters for electric storage water heaters

SANS 515:2003 (SABS 515)

3

Decorative paint for interior use

SANS 517:2009

1

Light steel frame building

SANS 520:2007/ISO 556:1980, IDT, Ed. 1

1

Coke (greater than 20 mm in size) - Determination of mechanical strength

SANS 521:2009

3.04

Hospital beds and cots

SANS 522:2007

1

The inspection, testing and examination of tower cranes

SANS 523:2009

2.03

Limes for use in building

1

Plastics - Determination of tensile properties Part 1: General principles

(SABS ISO 502)

(SABS 514)

(SABS 521)

(SABS 523) SANS 527-1:1993/ISO 527-1:1993, IDT, Ed. 1 (SABS ISO 527-1)

Page 25

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 527-2:1993/ISO 527-2:1993, IDT, Ed. 1 (SABS ISO 527-2)

1

Plastics - Determination of tensile properties Part 2: Test conditions for moulding and extrusion plastics

SANS 528-1:2007/ISO 639-1:2002, IDT, Ed. 1

1

Codes for the representation of names of languages Part 1: Alpha-2 code

SANS 528-2:2007/ISO 639-2:1998, IDT, Ed. 1

1

Codes for the representation of names of languages Part 2: Alpha-3 code

SANS 528-3:2008/ISO 639-3:2007, IDT, Ed. 1

1

Codes for the representation of names of languages Part 3: Alpha-3 code for comprehensive coverage of languages

SANS 528-5:2008/ISO 639-5:2006, IDT, Ed. 1

1

Codes for the representation of names of languages Part 5: Alpha-3 code for language families and groups

SANS 529:2007

3

Heat-resisting wiring cables

SANS 531:2007/ISO 4:1997, IDT, Ed. 3

1

Information and documentation - Rules for the abbreviation of title words and titles of publications

SANS 532:2009

1

Standard and specifications for industrial, medical, propellant, food and beverage gases, refrigerants and breathing gases

SANS 534-1:2008/VESA ABS/002:2008, MOD, Ed. 1 1

Vehicle security - Whole of vehicle marking Part 1: Microdot systems

SANS 537:2005

3.01

Oven thermostats for electric stoves

SANS 540-1:2009 (SABS 540-1)

4.01

Fibreboard products Part 1: Uncoated fibreboard

SANS 540-2:2009

4.01

Fibreboard products Part 2: Coated fibreboard

SANS 541:2004 (SABS 541)

3

Precast concrete paving slabs

SANS 542:2004

4

Concrete roofing tiles

SANS 543:2004 (SABS 543)

4

Fire hose reels (with semi-rigid hose)

SANS 545:2009

3.04

Wooden doors

SANS 547:2006/ISO 5173:2000, IDT, Ed. 1

1

Destructive tests on welds in metallic materials Bend tests

SANS 548:2003

1.07

Cationic bitumen road emulsions

SANS 549:2008

1

Shower enclosures for domestic purposes

SANS 550-1:2003

3.01

Wooden ladders Part 1: General requirements and methods of test

(SABS 529)

(SABS 537)

(SABS 540-2)

(SABS 542)

(SABS 545)

(SABS 548)

(SABS 550-1)

Page 26

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 550-2:2005 (SABS 550-2)

3.01

Wooden ladders Part 2: Single and extension ladders

SANS 550-3:2005

3.01

Wooden ladders Part 3: Trestle and extension trestle ladders

SANS 550-4:2005 (SABS 550-4)

3.01

Wooden ladders Part 4: Step-ladders, platform ladders and shelf ladders

SANS 551:2009

1

Detonators, relays and explosives initiating devices for commercial applications

SANS 552:2003

1

Paint-rollers including handle-frames and refills

SANS 553-1:2008/ISO 6185-1:2001, IDT, Ed. 1

1

Inflatable boats Part 1: Boats with a maximum motor power rating of 4,5 kW

SANS 553-2:2008/ISO 6185-2:2001, IDT, Ed. 1

1

Inflatable boats Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive

SANS 553-3:2008/ISO 6185-3:2001, IDT, Ed. 1

1

Inflatable boats Part 3: Boats with a maximum motor power rating of 15 kW and greater

SANS 554:1976/ISO 554:1976, IDT, Ed. 1 (SABS ISO 554)

1

Standard atmospheres for conditioning and/or testing - Specifications

SANS 555:2007

5

Unused and reclaimed mineral insulating oils for transformers and switchgear

SANS 556-1:2004

1

Low-voltage switchgear Part 1: Circuit-breakers

SANS 557:2008/ISO 10087:2006, IDT, Ed. 3

1

Small craft - Craft identification - Coding system

SANS 558:2009 (SABS 558)

3.05

Cast iron surface boxes and manhole and inspection covers and frames

SANS 559:2005

4.04

Vitrified clay sewer pipes and fittings

SANS 560:2008/ISO 10088:2001, IDT, Ed. 2

1

Small craft - Permanently installed fuel systems and fixed fuel tanks

SANS 561:2008/ISO 10133:2000, IDT, Ed. 2

1

Small craft - Electrical systems - Extra-low-voltage d.c. installations

SANS 562:1956 (SABS 562)

1

Canned hake (Cape cod)

SANS 563:2008/ISO 10134:2003, IDT, Ed. 2

1

Small craft - Electrical devices - Lightning-protection systems

SANS 564:2007 (SABS 564)

1.01

Rubber insertion sheeting

SANS 565:2003/BS 5651:1989, IDT, Ed. 1

1

Cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies

(SABS 550-3)

(SABS 555)

(SABS 559)

Page 27

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 566:2009/ISO 10239:2008, IDT, Ed. 2

2

Small craft - Liquefied petroleum gas (LPG) systems

SANS 567:2007/ISO 567:1995, IDT, Ed. 2

1

Coke - Determination of bulk density in a small container

SANS 568:2008/ISO 10240:2004, IDT, Ed. 2

1

Small craft - Owner's manual

SANS 569:2007

1

Open-sided passenger vehicles

SANS 570:2008

1

Directional stability performance of vehicles in the event of tyre failure

SANS 575:2008/ISO 5774:2006, IDT, Ed. 3

1

Plastics hoses - Textile-reinforced types for compressed-air applications - Specification

SANS 576:2008/ISO 1825:1996, IDT, Ed. 2

1

Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification

SANS 578-2:2008/ISO 10245-2:1994, IDT, Ed. 1

1

Cranes - Limiting and indicating devices Part 2: Mobile cranes

SANS 579:2005/ISO 579:1999, IDT, Ed. 3

1

Coke - Determination of total moisture

SANS 580:2007

1.02

Chloroprene rubber sheet (for waterproofing)

SANS 581:2007 (SABS 581)

3.02

Semi-flexible vinyl floor tiles

SANS 584:2008

1

Soda-lime granules (with indicator) for use during anaesthesia for carbon dioxide absorption

SANS 585:2009 (SABS 585)

3

The production of frozen fish, marine molluscs, and products derived therefrom

SANS 586:2007

3.01

Resin modified vinyl floor tiles

SANS 587:2005 (SABS 587)

2

Canned fish, canned marine molluscs and canned crustaceans and products derived therefrom

SANS 588:2008

4

Woollen overcoating

SANS 589:2009/ISO 589:2008, IDT, Ed. 4

2

Hard coal - Determination of total moisture

SANS 592 AND SANS 593:1957

1

Wood preservative mixtures containing 1) high temperature creosote and coal tar or 2) low and medium temperature creosote and coal tar (SANS 592 and SANS 593, bound together)

1

Wood preservative mixtures containing 1) high temperature creosote and coal tar or 2) low and medium temperature creosote and coal tar (SANS 592 and SANS 593, bound together)

5.01

Sterilized sodium chloride intravenous infusion

(SABS 580)

(SABS 586)

(SABS 588)

(SABS 592 AND SANS 593)

SANS 593 AND SANS 592:1957 (SABS 593 AND SANS 592)

SANS 595:2009 (SABS 595)

Page 28

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 597:2008 (SABS 597)

5

Sterilized compound sodium lactate intravenous infusion (Ringer-lactate solution for injection)

SANS 598:2008

5

Sterilized dextrose intravenous infusion

SANS 599:2009 (SABS 599)

5.01

Sterilized sodium chloride and dextrose intravenous infusion

SANS 601:2009

1.01

Dynamometer testing for replacement brake lining assemblies and drum brake linings intended for vehicles of category M1, M2 and N1

SANS 602:2007/ISO Guide 30:1992, IDT, Ed. 2

1

Terms and definitions used in connection with reference materials

SANS 603:2007/ISO Guide 31:2000, IDT, Ed. 2

1

Reference materials - Contents of certificates and labels

SANS 604:2007/ISO Guide 32:1997, IDT, Ed. 1

1

Calibration in analytical chemistry and use of certified reference materials

SANS 605:2007/ISO Guide 33:2000, IDT, Ed. 2

1

Uses of certified reference materials

SANS 606:2006/ISO 606:2004, IDT, Ed. 3

1

Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets

SANS 607:2007/ISO Guide 34:2000, IDT, Ed. 2

1

General requirements for the competence of reference material producers

SANS 608:2007/ISO Guide 35:2006, IDT, Ed. 3

1

Reference materials - General and statistical principles for certification

SANS 609:1996/ISO 609:1996, IDT, Ed. 2

1

Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method

SANS 612:2007/BS 5970:2001, IDT, Ed. 3

1

Code of practice for thermal insulation of pipework and equipment in the temperature range of -100 °C to +870 °C

SANS 613:2009

1.01

Fenestration products - Mechanical performance criteria

SANS 615-3:2009/ISO 10245-3:2008, IDT, Ed. 2

1

Cranes - Limiting and indicating devices Part 3: Tower cranes

SANS 616:2008

1.01

Wood-preserving creosote mixtures and coal-tar mixtures

SANS 618:2009/ISO 10324:1997, IDT, Ed. 1

1

Information and documentation - Holdings statements - Summary level

SANS 619:2007

2.02

Emulsifiable cutting oil (light duty)

SANS 621:2005 (SABS 621)

3.02

Castors for hospital equipment

SANS 622:2005

2.02

Gypsum cove cornice

(SABS 598)

(SABS ISO 609)

(SABS 619)

(SABS 622)

Page 29

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 626-2:2007/ISO 1213-2:1992, IDT, Ed. 1

1

Solid mineral fuels - Vocabulary Part 2: Terms relating to sampling, testing and analysis

SANS 628:2008

1

Mechanical ball type couplings of diameter exceeding 50 mm

SANS 629:2009 (SABS 629)

3.01

Softwood flooring boards

SANS 630:2009

3.02

Decorative high gloss enamel paints

SANS 631:2009

1

Crocodiles in captivity

SANS 632:2007

2.01

Clay roofing tiles

SANS 635:2007 (SABS 635)

1.02

Elastomeric structural glazing and panel gaskets

SANS 636:2009

4

Disinfectants based on quaternary ammonium compounds

SANS 637:2008 (SABS 637)

1.01

Wood-wool panels (cement-bonded)

SANS 638:2004/SADC HS 15:2004, IDT, Ed. 1

3

Food grade salt

SANS 639:2009 (SABS 639)

3

Detergent-disinfectants based on quaternary ammonium compounds

SANS 641:2010

1.02

Flexible polyurethane (polyester) foams

SANS 642:2010 (SABS 642)

1.02

Reconstituted flexible polyurethane foams

SANS 643:2007

2.01

Disinfectants based on stabilized inorganic chlorine compounds

SANS 644:1977 (SABS 644)

1

Boot and shoe sizing and marking (Mondopoint system)

SANS 647:1974/ISO 647:1974, IDT, Ed. 1

1

Brown coals and lignites - Determination of the yields of tar, water, gas and coke residue by low temperature distillation

SANS 648:1980 (SABS 648)

3

Toilet paper

SANS 650:2008

3.01

Laundry detergent (for use in non-automatic domestic washing machines)

SANS 651:2008 (SABS 651)

3

Low-foam laundry detergent (for use in automatic and non-automatic domestic washing machines)

SANS 652:2007

2.01

Carbon paper (Metric units)

1

Sound level meters

(SABS 630)

(SABS 632)

(SABS 636)

(SABS 638)

(SABS 641)

(SABS 643)

(SABS ISO 647)

(SABS 650)

(SABS 652) SANS 656:2008

Page 30

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 657-1:2009 (SABS 657-1)

3.02

Steel tubes for non-pressure purposes Part 1: Sections for scaffolding, general engineering and structural applications

SANS 657-2:2004

1.01

Steel tubes for non-pressure purposes Part 2: Steel tubes for cycles

SANS 657-3:2005 (SABS 657-3)

2

Steel tubes for non-pressure purposes Part 3: Steel tubes for rolls for conveyor belt idlers

SANS 657-4:2004

1.01

Steel tubes for non-pressure purposes Part 4: Steel tubes of round, oval, square and rectangular section for furniture

SANS 658:2008

1

Integrating-averaging sound level meters

SANS 659:2007

3.01

Lidocaine (lignocaine) hydrochloride, adrenaline (epinephrine) and noradrenaline (norepinephrine) injection for dental use

SANS 660:2009 (SABS 660)

3.04

Classroom furniture

SANS 662:2009

1.04

Screwing taps

SANS 664:1999 (SABS 664)

5

Cast iron gate valves for waterworks

SANS 664-1:2009

1

Wedge gate and resilient seal valves for waterworks Part 1: General

SANS 664-2:2009

1

Wedge gate and resilient seal valves for waterworks Part 2: Wedge gate valves

SANS 664-3:2009

1

Wedge gate and resilient seal valves for waterworks Part 3: Resilient seal valves

SANS 665:2000 (SABS 665)

4.01

Cast iron gate valves for general purposes

SANS 665-1:2009

1

Wedge gate and resilient seal valves for general purposes Part 1: General

SANS 665-2:2009

1

Wedge gate and resilient seal valves for general purposes Part 2: Wedge gate valves

SANS 665-3:2009

1

Wedge gate and resilient seal valves for general purposes Part 3: Resilient seal valves

SANS 666:2008

1

Ethanol-gel fuelled appliances

SANS 673:2009

3.02

Mixtures of copper-chromium-arsenic compounds for timber preservation

SANS 674:2008

1

Steel-reinforced spirally wound PE drainage and sewer pipes

SANS 675:2009

4

Zinc-coated fencing wire

(SABS 657-2)

(SABS 657-4)

(SABS 659)

(SABS 662)

(SABS 673)

(SABS 675)

Page 31

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 676:2003 (SABS 676)

3.03

Reinforced concrete pressure pipes

SANS 677:2003

3.03

Concrete non-pressure pipes

SANS 678:2005 (SABS 678)

3

Primers for wood

SANS 680:2006

3

Glazing putty for wooden and metal window frames

SANS 681:2007 (SABS 681)

3.02

Undercoats for paints

SANS 682:2007

3

Aluminium paint

SANS 685:2006 (SABS 685)

5

Fibre-cement sheets (flat and profiled)

SANS 687:2008

1

Inspection and testing of non-fixed load-lifting attachments

SANS 688:2008

1

Warp-knitted fabric for mosquito netting

SANS 690:2007/ISO 690:1987, IDT, Ed. 2

1

Documentation - Bibliographic references - Content, form and structure

SANS 690-2:2007/ISO 690-2:1997, IDT, Ed. 1

1

Information and documentation - Bibliographic references Part 2: Electronic documents or parts thereof

SANS 693:1982/ISO 693:1982, IDT, Ed. 1

1

Dimensions of seam welding wheel blanks

SANS 699:2009

1

Side upper leather

SANS 700:2009

1

Side upper leather (with a smooth corrected grain)

SANS 701:2009

1

Cordovan and cordovan-type leathers for orthopaedic use

SANS 702:2009

1

Vegetable-tanned side leather for orthopaedic use

SANS 704:2004/ISO 704:2000, IDT, Ed. 2

1

Terminology work - Principles and methods

SANS 705:2009

1

Vegetable-tanned harness and bridle leathers

SANS 706:2009

1

Leather welting

SANS 708:2007

2.02

Refrigerated farm milk tanks

1.01

Aluminium cans for milk and cream

(SABS 677)

(SABS 680)

(SABS 682)

(SABS ISO 693)

(SABS 708) SANS 709:2007 (SABS 709)

Page 32

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 710:2008 (SABS 710)

1.01

Acid-cored solders

SANS 711:2008

2.01

Primary aluminium ingots for remelting

SANS 712:2009

1

Printed side upper leather

SANS 713:2007

2.02

Unsaturated polyester (UP) resin systems

SANS 714:2009

1

Lining leather (chrome-tanned syntan-retanned side)

SANS 717-1:1996/ISO 717-1:1996, IDT, Ed. 2

1

Acoustics - Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation

SANS 717-2:1996/ISO 717-2:1996, IDT, Ed. 2 (SABS ISO 717-2)

1

Acoustics - Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation

SANS 719:2008

3.01

Electric welded low carbon steel pipes for aqueous fluids (large bore)

SANS 722:1982 (SABS 722)

3

The production of infants' and children's shoes (stuck-on and stitch-down construction)

SANS 726:2003

2.03

Medical trolleys (dressing/medicine; instrument; anaesthetists' dressing)

SANS 727:2003 (SABS 727)

2.03

Windows and doors made from rolled mild steel sections

SANS 728-8:2009/AS 1603.8:1996, IDT, Ed. 1

1

Automatic fire detection and alarm systems Part 8: Multi-point aspirated smoke detectors

SANS 729:2008

1

Live aquaculture abalone

SANS 731-1:2006

4

Road markings Part 1: Single-pack solvent-borne paints

SANS 731-2:2006

1.01

Road markings Part 2: Single-pack water-borne paints

SANS 733:2008

2.01

Boxboard (Metric units)

SANS 735:2009 (SABS 735)

2.02

Cathode copper

SANS 737:2009/ISO 10329:2009, IDT, Ed. 1

1

Coal - Determination of plastic properties Constant-torque Gieseler plastometer method

SANS 738-1:2008/ISO 5815-1:2003, IDT, Ed. 1

1

Water quality - Determination of biochemical oxygen demand after "n" days (BODn) Part 1: Dilution and seeding method for allylthiourea addition

SANS 740-2:2008/ISO 787-2:1981, IDT, Ed. 1

1

General methods of test for pigments and extenders Part 2: Determination of matter volatile at 105 °C

(SABS 711)

(SABS 713)

(SABS ISO 717-1)

(SABS 719)

(SABS 726)

(SABS 731-1)

(SABS 733)

Page 33

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 741:2006 (SABS 741)

3.03

Industrial boots (including safety boots) with directvulcanized soles and heels

SANS 742:2008/ISO 3:1973, IDT, Ed. 1

1

Preferred numbers - Series of preferred numbers

SANS 745-0:2008/AS/NZS 4357.0:2005, IDT, Ed. 1

1

Structural laminated veneer lumber Part 0: Specifications

SANS 745-1:2008/AS/NZS 4357.1:2005, IDT, Ed. 1

1

Structural laminated veneer lumber Part 1: Method of test for measurement of dimensions and shape

SANS 745-2:2008/AS/NZS 4357.2:2005, IDT, Ed. 1

1

Structural laminated veneer lumber Part 2: Determination of structural properties - Test methods

SANS 745-3:2008/AS/NZS 4357.3:2006, IDT, Ed. 1

1

Structural laminated veneer lumber Part 3: Determination of structural properties - Evaluation methods

SANS 746:1976 (SABS 746)

2

Cast-iron pipes and pipe fittings for use above ground in drainage installations

SANS 748:2002

3.05

Road tar binders prepared from coke oven crudes

SANS 749:2003 (SABS 749)

3.03

Road tar binders prepared from Lurgi-gasification crudes

SANS 750:2007

4.01

Interlock fabric

SANS 751:2008 (SABS 751)

5

Burglar-resistant safes

SANS 752:2009

2.06

Float valves

SANS 753:2009 (SABS 753)

4.07

Pine poles, cross-arms and spacers for power distribution, telephone systems and street lighting

SANS 754:2010

4.06

Eucalyptus poles, cross-arms and spacers for power distribution and communications systems

SANS 755:2006 (SABS 755)

2.02

Mineral-insulated metal-sheathed air-heating units for appliances

SANS 756:2008

1.02

Duplicator paper (metric units)

SANS 757:2004 (SABS 757)

3.03

Sheet steel furniture

SANS 759:2008/ISO 1563:1990, IDT, Ed. 2

1

Dental alginate impression material

SANS 761:2008 (SABS 761)

2.01

Plumage fillings

SANS 762:2008/BS 6657:2002, IDT, Ed. 1

1

Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation - Guide

(SABS 748)

(SABS 750)

(SABS 752)

(SABS 754)

(SABS 756)

Page 34

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 765:2009

1

Off-the-road (OTR) tyres - Earth-moving tyres for earth-moving machinery - Repairs and retreading

SANS 767-1:1982

2

Earth leakage protection units Part 1: Fixed earth leakage protection circuit-breakers

SANS 767-2:1983 (SABS 767-2)

2

Earth leakage protection units Part 2: Single-phase, portable units

SANS 770:2009

2.03

Footwear laces

SANS 776:2005 (SABS 776)

3.01

Copper alloy gate valves - Heavy duty

SANS 777:2009

3.03

Overbed tables

SANS 778:2005 (SABS 778)

3.03

Patients' trolleys

SANS 779:1972

2

Invalid chairs

SANS 780:2009 (SABS 780)

4

Distribution transformers

SANS 784:2008/AS/NZS 1428.4:2002, MOD

1

Design for access and mobility - Tactile indicators

SANS 785:2006 (SABS 785)

3.03

Writing equipment - Ballpoint pens

SANS 786:2007

3.02

Flexible vinyl flooring

SANS 787:2005 (SABS 787)

1.02

Ophthalmic lenses

SANS 788:2010

1

Frozen shrimps (prawns), langoustines and crabs

SANS 791:2004 (SABS 791)

5.01

Unplasticized poly(vinyl chloride) (PVC-U) sewer and drain pipes and pipe fittings

SANS 794:2009

2.02

Aggregates of low density

SANS 795:2007 (SABS 795)

3.02

Wheelbarrows

SANS 802:2001

2.04

Bituminous aluminium paint

SANS 803:2005 (SABS 803)

4.03

Fibre-cement boards

SANS 804:2008

2.01

Unwrought tough pitch coppers: Electrolytic tough pitch high conductivity copper

2

Unwrought tough pitch coppers: Tough pitch high conductivity copper

(SABS 767-1)

(SABS 770)

(SABS 777)

(SABS 779)

(SABS 786)

(SABS 794)

(SABS 802)

(SABS 804) SANS 805:1970 (SABS 805)

Page 35

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 806:2008 (SABS 806)

2.01

Unwrought tough pitch coppers: Grade A tough pitch copper

SANS 807:2009

2.02

Unwrought tough pitch coppers: Grade B tough pitch copper

SANS 808:1967 (SABS 808)

1

Cable glands for use on flameproof enclosures (Ex d)

SANS 809:2007

6.01

Industrial body belts

SANS 813:2008 (SABS 813)

3.02

Clamps for wire ropes

SANS 814:2009

3.03

General purpose and aircraft hose clips (Worm-drive Type)

SANS 815-1:2005 (SABS 815-1)

1.01

Shoulder-ended and groove-ended piping systems Part 1: Shoulder-ended steel pipes, fittings and couplings

SANS 815-2:2004

1

Shoulder-ended and groove-ended pipe systems Part 2: Groove-ended steel pipes, fittings and couplings

SANS 817:2007 (SABS 817)

3.01

Lidocaine (lignocaine) hydrochloride injection for dental use

SANS 819:2006

3.03

Fibre-cement pipes, couplings and fittings for sewerage, drainage and low-pressure irrigation

SANS 820:2006 (SABS 820)

3

Mild steel nails

SANS 821:2007

3.01

WC flushing cisterns

SANS 822:2007 (SABS 822)

1.02

Sizes of paper and envelopes

SANS 824:2006

2.01

Lime for soil stabilization

SANS 825:1993 (SABS 825)

3

Hand dishwashing and light duty detergent (liquid)

SANS 829:2009/ISO 6240:1980, IDT, Ed. 1

1

Performance standards in building - Contents and presentation

SANS 830:2009/ISO 6241:1984, IDT, Ed. 1

1

Performance standards in building - Principles for their preparation and factors to be considered

SANS 831-1:2009/ISO 6242-1:1992, IDT, Ed. 1

1

Building construction - Expression of users' requirements Part 1: Thermal requirements

SANS 831-2:2009/ISO 6242-2:1992, IDT, Ed. 1

1

Building construction - Expression of users' requirements Part 2: Air purity requirements

SANS 831-3:2009/ISO 6242-3:1992, IDT, Ed. 1

1

Building construction - Expression of users' requirements Part 3: Acoustical requirements

(SABS 807)

(SABS 809)

(SABS 814)

(SABS 819)

(SABS 821)

(SABS 824)

Page 36

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 832:2007/ISO 832:1994, IDT, Ed. 2

1

Information and documentation - Bibliographic description and references - Rules for the abbreviation of bibliographic terms

SANS 857-1:2004/ISO 857-1:1998, IDT, Ed. 1

1

Welding and allied processes - Vocabulary Part 1: Metal welding processes

SANS 857-2:2007/ISO 857-2:2005, IDT, Ed. 1

1

Welding and allied processes - Vocabulary Part 2: Soldering and brazing processes and related terms

SANS 860:2008/ISO 860:2007, IDT, Ed. 3

1

Terminology work - Harmonization of concepts and terms

SANS 861:2008/ISO 1567:1999, IDT, Ed. 3

1

Dentistry - Denture base polymers

SANS 862:2009

1

Set-top box decoder for free-to-air digital terrestrial television

SANS 865:2008 (SABS 865)

2.02

Ambulance stretchers

SANS 866:2006

2.03

Stainless steel cutlery

SANS 868-1-1:2005

1

Compression-ignition engine systems and machines powered by such engine systems, for use in mines and plants with explosive gas atmospheres or explosive dust atmospheres or both Part 11:Hazardous locations in underground mines - Basic explosion protected engines

SANS 868-1-2:2005

1

Compression-ignition engine systems and machines powered by such engine systems, for use in mines and plants with explosive gas atmospheres or explosive dust atmospheres or both Part 1-2: Hazardous locations in underground mines Explosion protected engine systems

SANS 868-1-3:2005

1

Compression-ignition engine systems and machines powered by such engine systems, for use in mines and plants with explosive gas atmospheres or explosive dust atmospheres or both Part 1-3: Hazardous locations in underground mines Machines

SANS 868-4:2005

1.01

Compression-ignition engine systems and machines powered by such engine systems, for use in mines and plants with explosive gas atmospheres or explosive dust atmospheres or both Part 4: Nonhazardous locations in underground coal mines

SANS 871:2009

2

Boron timber preservatives

SANS 873:2007 (SABS 873)

3

Knitted tubular bandages

SANS 876:2009/NRS 012:2009, IDT, Ed. 2

1

Cable terminations and live conductors within airfilled enclosures (insulation co-ordination) for rated a.c. voltages from 7,2 kV up to and including 36 kV

SANS 877:2007 (SABS 877)

3

Woven cotton tapes

(SABS 866)

(SABS 871)

Page 37

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 878:2004 (SABS 878)

4.01

Ready-mixed concrete

SANS 879:2009/DS 2403:2001, IDT, Ed. 1

1

Energy management - Specifications

SANS 881:2009

1

Hard coal - Determination of caking power - Roga test

SANS 883:2009/ISO 5999:2007, IDT, Ed. 1

1

Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification

SANS 885:2003 (SABS 885)

2

Packaged meat products (processed or manufactured)

SANS 886:2009/BS 8496:2007, IDT, Ed. 1

1

Water quality - Enumeration of micro-organisms in water samples - Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement

SANS 887:2005

3

Varnish for interior use

SANS 888:2008 (SABS 888)

3.01

Interlining

SANS 890-1:2007

1.02

Ballasts for fluorescent lamps Part 1: Ballasts for lamps for operation with starters (class A lamps)

SANS 890-2:2006 (SABS 890-2)

3.01

Ballasts for fluorescent lamps Part 2: Ballasts for lamps for operation without starters (class B lamps)

SANS 891:2006

3.01

Reference ballasts for class B fluorescent lamps

SANS 892:2003 (SABS 892)

3.02

General purpose detergent (beads, granules and powders)

SANS 894:2009/SEE NOTE IN STAGE 55.60:2008, IDT, Ed. 2

1

Test Specifications for SD and HD Level Integrated Receiver Decoders

SANS 895:2008 (SABS 895)

2.01

Gas cylinder trolleys

SANS 896:2003

2.02

Soiled linen carriers

SANS 897:2008 (SABS 897)

2.04

Wheeled bed screens

SANS 899:1987

3

Insecticidal space sprays in pressurized aerosol dispensers

SANS 901:2009 (SABS 901)

3.01

Paint and varnish brushes (flat type)

SANS 902:2007

3

Hessian cloth

4

Aluminium alloy corrugated and troughed sheets

(SABS 887)

(SABS 890-1)

(SABS 891)

(SABS 896)

(SABS 899)

(SABS 902) SANS 903:2010 (SABS 903)

Page 38

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 904:2010/ISO 4044:2008, IDT, Ed. 2

1

Leather - Chemical tests - Preparation of chemical test samples

SANS 906:2006

2.03

Stainless steel wash-hand basins and wash troughs

SANS 907:2009 (SABS 907)

2.01

Stainless steel sinks for institutional use

SANS 911:2004

3.02

Natural fibre ropes

SANS 913:2007 (SABS 913)

3

Springspikes for light rails

SANS 914:2007

3

Fishplates for light rails

SANS 915:2007 (SABS 915)

3

Coach screws for light rails

SANS 916:2007

3

Fishbolts and nuts for light rails

SANS 917:2007 (SABS 917)

3

Dogspikes for light rails

SANS 920:2005

2.02

Steel bars for concrete reinforcement

SANS 921:2009 (SABS 921)

3.01

Pitch-impregnated fibre pipes and fittings and jointing

SANS 924:2003

3

Stainless steel stall urinals

SANS 925:2006 (SABS 925)

3.02

Orthopaedic tubular knitted fabric

SANS 927:2007

3.01

Precast concrete kerbs, edgings and channels

SANS 928:2009/ISO 10241:1992, IDT, Ed. 1

1

International terminology standards - Preparation and layout

SANS 929:2008

2.07

Plywood and composite board

SANS 930:2006 (SABS 930)

3

Processed cotton duck (560 g)

SANS 933:2007

2.02

Corrugated board containers for the export of citrus fruit

SANS 935:2007 (SABS 935)

2.01

Hot-dip (galvanized) zinc coatings on steel wire

SANS 936:2008

1.02

Spheroidal graphite iron castings

1.02

Austenitic spheroidal graphite iron castings

(SABS 906)

(SABS 911)

(SABS 914)

(SABS 916)

(SABS 920)

(SABS 924)

(SABS 927)

(SABS 929)

(SABS 933)

(SABS 936) SANS 937:2008 (SABS 937)

Page 39

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 937 AND SANS 936:1969 (SABS 937 AND SANS 936)

1

Austenitic spheroidal graphite iron castings

SANS 938:2003

1.02

Unpolished twines

SANS 939:2008 (SABS 939)

1.04

Polished twines

SANS 940:2005

2.01

Emulsion roof paint

SANS 942:2009 (SABS 942)

2.04

Children's, youths', and maids' school shoes with direct injection-moulded soles and heels

SANS 943:2008

2.03

Man-made fibre ropes

SANS 945-1:2006 (SABS 945-1)

2.04

Support and compression bandages Part 1: Woven crêpe bandages

SANS 945-2:2002

2

Support and compression bandages Part 2: Warpknitted bandages

SANS 947:2007 (SABS 947)

1.02

Indoor venetian blinds

SANS 949:2005

2.02

Strongroom and vault doors

SANS 950:2008 (SABS 950)

2.02

Unplasticized polyvinyl chloride rigid conduit and fittings for use in electrical installations

SANS 951:2007

3.01

Fire-resistant record protection equipment

SANS 952:1985 (SABS 952)

2

Polyolefin film for damp- and waterproofing in buildings

SANS 953-1:2008

1.01

Storage of firearms and ammunition Part 1: Safes

SANS 953-2:2003 (SABS 953-2)

1.01

Storage of firearms and ammunition Part 2: Strongrooms

SANS 954:2004

1.01

Metal-arc welding equipment (non-automatic, singleoperator, transformer type)

SANS 955:2007 (SABS 955)

3.01

Lidocaine (lignocaine) hydrochloride and adrenaline (epinephrine) injection for dental use

SANS 956-1:2009/ISO 20022-1:2004, IDT, Ed. 1

1

Financial services - UNIversal Financial Industry message scheme Part 1: Overall methodology and format specifications for inputs to and outputs from the ISO 20022 Repository

SANS 956-2:2009/ISO 20022-2:2007, IDT, Ed. 2

1

Financial services - UNIversal Financial Industry message scheme Part 2: Roles and responsibilities of the registration bodies

ARP 956-3:2009/ISO/TS 20022-3:2004, IDT, Ed. 1

1

Financial services - UNIversal Financial Industry message scheme Part 3: ISO 20022 modelling guidelines

(SABS 938)

(SABS 940)

(SABS 943)

(SABS 945-2)

(SABS 949)

(SABS 951)

(SABS 953-1)

(SABS 954)

Page 40

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

ARP 956-4:2009/ISO/TS 20022-4:2004, IDT, Ed. 1

1

Financial services - UNIversal Financial Industry message scheme Part 4: ISO/TS 20022 XML design rules

ARP 956-5:2009/ISO/TS 20022-5:2004, IDT, Ed. 1

1

Financial services - UNIversal Financial Industry message scheme Part 5: ISO 20022 reverse engineering

SANS 957:2010/ISO 6310:2009, IDT, Ed. 3

2

Road vehicles - Brake linings - Compressive strain test methods

SANS 960:2005

4

Textiles - Dimensional stability during washing and drying procedures

SANS 962-1:2009 (SABS 962-1)

2.02

Mechanical fasteners for conveyor belts Part 1: Plate-and-bolt type fasteners

SANS 962-2:2006

2.01

Mechanical fasteners for conveyor belts Part 2: Hinged type and plate-and-rivet type fasteners

SANS 964:2008 (SABS 964)

3.01

Solas life-jackets

SANS 965:2008

1.04

Welded austenitic stainless steel tubes

SANS 966-1:2010 (SABS 966-1)

3.05

Components of pressure pipe systems Part 1: Unplasticized poly(vinyl chloride) (PVC-U) pressure pipe systems

SANS 966-2:2010

1.06

Components of pressure pipe systems Part 2: Modified poly(vinyl chloride)(PVC-M) pressure pipe systems

SANS 967:2004 (SABS 967)

2.03

Unplasticized poly(vinyl chloride) (PVC-U) soil, waste and vent pipes and pipe fittings

SANS 970:2010/ISO 5397:1984, IDT, Ed. 1

1

Leather - Determination of nitrogen content and "hide substance" - Titrimetric method

SANS 971:2003 (SABS 971)

3

Fire-retardant textile-reinforced conveyor belting (for use in fiery mines)

SANS 972-1:2005

2.03

Signs for street and property identification Part 1: Retro-reflective signs

SANS 972-2:2004 (SABS 972-2)

2.03

Signs for street and property identification Part 2: Non-retro-reflective signs

SANS 974-2:2007

1.01

Rubber joint rings (non-cellular) Part 2: Joint rings for use in the dairy industry

SANS 974-3:2009 (SABS 974-3)

1.01

Rubber joint rings (non-cellular) Part 3: Joint rings for use in pressure cookers

SANS 975:2010

1.05

Prestressed concrete pipes

SANS 977:2003 (SABS 977)

2

Textile tolerances

SANS 981:2009

2.03

High-pressure down-draught steam sterilizers (autoclaves) (with independent steam supply)

(SABS SM 960)

(SABS 962-2)

(SABS 965)

(SABS 966-2)

(SABS 972-1)

(SABS 974-2)

(SABS 975)

(SABS 981)

Page 41

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 982:2009 (SABS 982)

3.01

High-pressure high-vacuum steam sterilizers (autoclaves)

SANS 984:2009/IEEE 1584:2002, IDT, Ed. 1

1

IEEE Guide for Performing Arc-Flash Hazard Calculations

SANS 985:2008 (SABS 985)

3.03

Polyester-and-wool uniform fabrics

SANS 986:2006

3.01

Precast reinforced concrete culverts

SANS 990-1:2008

1

Business process outsourcing and offshoring operations Part 1: Outbound contact centre operations

SANS 990-2:2008

1

Business process outsourcing and offshoring operations Part 2: Inbound contact centre operations

SANS 990-3:2008

1

Business process outsourcing and offshoring operations Part 3: Back-office processing operations

SANS 991:2008

2.02

Aluminium and aluminium alloy sand castings and gravity die castings

SANS 992:2008 (SABS 992)

2.02

Aluminium and aluminium alloy pressure die castings

SANS 993:1972

1

Modular co-ordination in building

SANS 995:1990 (SABS 995)

2

Chamois leathers

SANS 996:2008

3.01

Car radio receivers

SANS 998:2006 (SABS 998)

1.02

Stainless steelware for domestic and general use

SANS 999:2007

3.01

Anodized coatings on aluminium (for architectural applications)

SANS 1001:2004 (SABS 1001)

1.03

Semi-vitreous crockery (domestic ware)

SANS 1002:2006

1.03

Semi-vitreous crockery (hotel ware)

SANS 1003:2006 (SABS 1003)

2.01

Fine china and vitrified tableware for domestic use

SANS 1004:2006

2.01

Fine china and vitrified tableware for non-domestic use

SANS 1005:2009 (SABS 1005)

2.05

Innerspring mattresses

SANS 1006:2007

1.02

Plastic floats for ball valves

2.01

Warp-knitted pocketing

(SABS 986)

(SABS 991)

(SABS 993)

(SABS 996)

(SABS 999)

(SABS 1002)

(SABS 1004)

(SABS 1006) SANS 1008:2007 (SABS 1008)

Page 42

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1010:2007 (SABS 1010)

3.01

Bunting

SANS 1011:2007

1.02

Shapes, sizes, and marking of grinding wheels

SANS 1012:2006 (SABS 1012)

1.03

Electric light dimmers (Metric units)

SANS 1014:1985/ISO 1014:1985, IDT, Ed. 2

1

Coke - Determination of true relative density, apparent relative density and porosity

SANS 1015:2008 (SABS 1015)

1.02

Fire resisting door units for record rooms

SANS 1017:2008

1.04

Electric cables for motor vehicles - Low-voltage cables and flexible earthing straps for motor vehicles

SANS 1018:2007 (SABS 1018)

1.03

Electric cables for motor vehicles - Ignition cables for motor vehicles

SANS 1019:2008

2.05

Standard voltages, currents and insulation levels for electricity supply

SANS 1020:2003 (SABS 1020)

2

Power-operated dispensing devices for flammable liquid fuels

SANS 1021:2007

3.01

Water taps (plastic bodies)

SANS 1022:2009 (SABS 1022)

2.01

Metal roofing tiles

SANS 1024:2006

2.01

Welded steel fabric for reinforcement of concrete

SANS 1026:2008 (SABS 1026)

1.03

Bench vices for metal work (Metric units)

SANS 1027:2008

1.01

Woodworkers' vices

SANS 1028:2008 (SABS 1028)

1.01

Pipe wrenches (Metric units)

SANS 1029:2008

2.02

Miniature substations

SANS 1032:2010 (SABS 1032)

3

Detergent-disinfectants based on stabilized inorganic chlorine compounds

SANS 1033:2003

1.03

Solid filler wire for the submerged arc welding of mild steel and medium high tensile steel (metric units)

SANS 1034:2008 (SABS 1034)

1.01

Grey iron castings

SANS 1036:2004/ISO 36:1999, IDT, Ed. 3

1

Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabric

SANS 1037:2008 (SABS 1037)

1.03

Standard transformer bushings

(SABS 1011)

(SABS ISO 1014)

(SABS 1017)

(SABS 1019)

(SABS 1021)

(SABS 1024)

(SABS 1027)

(SABS 1029)

(SABS 1033)

Page 43

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1038:2007 (SABS 1038)

2.01

Cotton eyelet fabric

SANS 1039:2008

1.03

Wooden ceiling and panelling boards

SANS 1040:2004 (SABS 1040)

2.02

Pressure cookers for domestic use

SANS 1041:2004

2.01

Tubular fluorescent lamps for general service

SANS 1042:2006 (SABS 1042)

1.05

Polymer floor dressings

SANS 1043:2010

3

The manufacture of sanitary towels

SANS 1044:2009 (SABS 1044)

3.01

Industrial laundry detergents

SANS 1046:1990/76/756/EEC:1976, MOD; 80/233/EEC:1980, MOD; 82/244/EEC:1982, MOD; 83/276/EEC:1983, MOD; 84/8/EEC:1984, MOD; 89/278/EEC:1989, MOD; ECE R48:1983, MOD (SABS 1046)

3

Motor vehicle safety: Lights and light-signalling devices installed on motor vehicles and trailers

SANS 1047:2006/74/60/EEC:1974, MOD, Ed. 1; 78/632/EEC:1978, MOD, Ed. 1 (SABS 1047)

2.02

Motor vehicle safety specification: Interior fittings (passenger cars) (Incorporating EEC Directive 74/60 "Interior fittings of motor vehicles" and the amending EEC Directive 78/632, with modifications)

SANS 1051-1:2006/ECE R13:1980, MOD

2.01

Braking Part 1: General

SANS 1051-2:2006/ECE R13:1980, MOD (SABS SV 1051-2)

2.01

Braking Part 2: Response time of braking devices on vehicles fitted with compressed-air braking devices

SANS 1051-3:2006/ECE R13:1980, MOD

2.01

Braking Part 3: Energy sources and reservoirs

SANS 1051-4:2006/ECE R13:1980, MOD (SABS SV 1051-4)

2.01

Braking Part 4: Spring brakes

SANS 1051-5:2006/ECE R13:1980, MOD

2.01

Braking Part 5: Parking brakes: Mechanically locked brake cylinder (lock actuator) type

SANS 1051-6:2006/ECE R13:1980, MOD (SABS SV 1051-6)

1.01

Braking Part 6: Distribution of braking effort and compatibility of vehicles in combination

SANS 1055:2007

2.01

Rear underrun protection devices

SANS 1056-1:2008 (SABS 1056-1)

1.03

Ballvalves Part 1: Fire-safe valves

SANS 1056-2:2006

2.01

Ball valves Part 2: Heavy duty valves (not fire-safe)

2.02

Ball valves Part 3: Light duty valves (not fire-safe)

(SABS 1039)

(SABS 1041)

(SABS 1043)

(SABS SV 1051-1)

(SABS SV 1051-3)

(SABS SV 1051-5)

(SABS 1055)

(SABS 1056-2) SANS 1056-3:2009 (SABS 1056-3)

Page 44

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1058:2010 (SABS 1058)

2

Concrete paving blocks

SANS 1060:2003

1.02

Wheelchairs (folding type)

SANS 1062:2010 (SABS 1062)

1.01

Pressure and vacuum gauges

SANS 1063:2008

3

Earth rods, couplers and connections

SANS 1067-1:2005 (SABS 1067-1)

2.01

Copper-based fittings for copper tubes Part 1: Compression fittings

SANS 1067-2:2005

2.01

Copper-based fittings for copper tubes Part 2: Capillary solder fittings

SANS 1068:2008 (SABS 1068)

1.03

Coats and jackets (protective, unlined)

SANS 1071:2005/ISO 1071:2003, IDT, Ed. 2

2

Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification

SANS 1077:2009 (SABS 1077)

1.02

Sealing compounds for the building and construction industry, two-component, polyurethane-base

SANS 1080:2002/77/541/EEC:1977, MOD; 81/576/EEC:1981, MOD; 82/319/EEC:1982, MOD (SABS 1080)

1.01

Restraining devices (safety belts) for occupants of adult build in motor vehicles (Revised requirements)

SANS 1081:2001 (SABS 1081)

2

Detergent-disinfectants based on iodophors

SANS 1082:2001

2

Detergent-disinfectants based on phenolics

SANS 1083:2006 (SABS 1083)

2.02

Aggregates from natural sources - Aggregates for concrete

SANS 1085:2004

3.03

Wall outlet boxes for the enclosure of electrical accessories

SANS 1086:2007 (SABS 1086)

1.01

Flexible poly(vinyl chloride) (PVC) pressure hose

SANS 1088:2004

1.02

Luminaire entries and spigots

SANS 1090:2009 (SABS 1090)

2.02

Aggregates from natural sources - Fine aggregates for plaster and mortar

SANS 1091:2004

2

National colour standard

SANS 1092:2007 (SABS SM 92)

3.01

Breaking strength and extension at break of textile fabrics - Strip method using constant rate of load

SANS 1097:2005

4

Dimensional changes in textile fabrics caused by immersion in cold water

(SABS 1060)

(SABS 1063)

(SABS 1067-2)

(SABS ISO 1071)

(SABS 1082)

(SABS 1085)

(SABS 1088)

(SABS 1091)

(SABS SM 97)

Page 45

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1099:2008 (SABS 1099)

1.05

Hardwood furniture timber

SANS 1100:2009

1.01

Industrial laminated sheets based on phenolic resin

SANS 1108:2005 (SABS 1108)

1.03

Glass test tubes

SANS 1109-1:2005/ISO 7-1:1994, IDT, Ed. 3

3

Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation

SANS 1109-2:2005/ISO 7-2:2000, IDT, Ed. 2 (SABS 1109-2)

3

Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges

SANS 1110:2008

1.07

Screwdrivers for slotted-head screws

SANS 1111:2008 (SABS 1111)

1.05

Coal-burning appliances (reduced smoke emission type)

SANS 1112:2008

1.01

Open-end, box, and combination wrenches

SANS 1113:2006 (SABS 1113)

1.01

Hand-operated, square-drive socket wrenches

SANS 1114:2006

3.03

Industrial boots (including safety boots) with stuckon pre-moulded or direct-injection-moulded soles and heels

SANS 1115:2007 (SABS 1115)

1.02

Cast iron gratings for gullies and stormwater drains

SANS 1116-1:2008

3

Retro-reflective number plates for motor vehicles Part 1: Blank plates (aluminium)

SANS 1116-2:2008 (SABS 1116-2)

5

Retro-reflective number plates for motor vehicles Part 2: Number plates (aluminium)

SANS 1116-3:2008

3

Retro-reflective number plates for motor vehicles Part 3: Blank plates (plastics)

SANS 1116-4:2008 (SABS 1116-4)

5

Retro-reflective number plates for motor vehicles Part 4: Number plates (plastics)

SANS 1117:2007

1.02

Plastics wrappings for the protection of steel pipelines

SANS 1118-1:2003 (SABS 1118-1)

3.02

School clothing Part 1: General requirements for school clothing

SANS 1118-2:2004

2.04

School clothing Part 2: Blazers

SANS 1118-3:2008 (SABS 1118-3)

3.03

School clothing Part 3: Trousers and shorts

SANS 1118-4:2008

3.02

School clothing Part 4: Shirts

(SABS 1100)

(SABS 1109-1)

(SABS 1110)

(SABS 1112)

(SABS 1114)

(SABS 1116-1)

(SABS 1116-3)

(SABS 1117)

(SABS 1118-2)

(SABS 1118-4)

Page 46

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1118-6:2008 (SABS 1118-6)

3.03

School clothing Part 6: Dresses, tunics and gyms

SANS 1118-7:2008

3.03

School clothing Part 7: Girls' slacks and skirts

SANS 1118-9:2008 (SABS 1118-9)

1.03

School clothing Part 9: Knee-high stockings and ankle socks

SANS 1118-10:2008

1.04

School clothing Part 10: Jerseys and cardigans

SANS 1118-11:2008 (SABS 1118-11)

1.04

School clothing Part 11: Briefs

SANS 1118-12:2008

1.03

School clothing Part 12: Tracksuits

SANS 1118-13:2008 (SABS 1118-13)

1.04

School clothing Part 13: Athletic wear

SANS 1120:2008

2.01

Pliers and nippers

SANS 1123:2007 (SABS 1123)

3.01

Pipe flanges

SANS 1124-1:1998

3

Syringes and needles (sterile-packed for single use) Part 1: Injection needles

SANS 1124-2:1998 (SABS 1124-2)

3

Syringes and needles (sterile-packed for single use) Part 2: Syringes

SANS 1125:2004

2.03

Room air conditioners and heat pumps

SANS 1126:2007 (SABS 1126)

2

Mechanical jacks

SANS 1127:2007

2

Algaecides for use in freshwater swimming pools

SANS 1128-1:2008 (SABS 1128-1)

2

Firefighting equipment Part 1: Components of underground and above-ground hydrant systems

SANS 1128-2:2008

2

Firefighting equipment Part 2: Hose couplings, connectors and branch pipe and nozzle connections

SANS 1129:2008 (SABS 1129)

1.04

Steel door frames

SANS 1130:2008

1.04

Fibre reinforcing material for pipe wrapping

SANS 1132:2009/ISO 132:2005, IDT, Ed. 4

2

Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia)

SANS 1133:2008/ISO 1133:2005, IDT, Ed. 4

2

Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

1

Diesel engines modified for use in hazardous locations (other than in mines)

(SABS 1118-7)

(SABS 1118-10)

(SABS 1118-12)

(SABS 1120)

(SABS 1124-1)

(SABS 1125)

(SABS 1127)

(SABS 1128-2)

(SABS 1130)

(SABS ISO 1133) SANS 1142:1979 (SABS 1142)

Page 47

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1143:2008 (SABS 1143)

2.01

Mushroom- and countersunk-head bolts and nuts

SANS 1144:2007

2

Hydraulic trolley jacks

SANS 1145:2007 (SABS 1145)

2.01

Castor and icing sugars for household and confectionery use

SANS 1147:2001

1.01

Leather school bags and school brief-cases

SANS 1148:2008 (SABS 1148)

1.01

Wooden safety matches

SANS 1150:2007

2.03

Glass-reinforced polyester (GRP) laminated sheets (profiled or flat)

SANS 1151:2005 (SABS 1151)

3.01

Portable rechargeable fire extinguishers Halogenated hydrocarbon type extinguishers

SANS 1152:2008

1.03

Metal-working chisels for hand use

SANS 1156-1:2007 (SABS 1156-1)

1.02

Hose for liquefied petroleum gas (LPG) Part 1: Hose used in road and rail transport

SANS 1156-2:2010

2

Hose for liquefied petroleum gas (LPG) Part 2: Hose and tubing for use in LPG vapour phase and LPG-air installations

SANS 1159:2003 (SABS 1159)

2

The production of pre-cooked frozen foods containing protein

SANS 1163:1977

1

Detergent for domestic dishwashing machines

SANS 1166:2006 (SABS 1166)

2

Syringes with or without needles for the injection of insulin (sterile-packed for single use)

SANS 1167:2006

3.03

Industrial shoes (including safety shoes) with stuckon pre-moulded or direct-injection-moulded soles and heels

SANS 1168:2006 (SABS 1168)

3.03

Industrial shoes (including safety shoes) with directvulcanized soles and heels

SANS 1169:2008

1.01

Temporary stands

SANS 1170:2008 (SABS 1170)

1.03

Linear alkylbenzenesulphonic acid

SANS 1171:2006

2.02

Metal screws for wood

SANS 1172:2008 (SABS 1172)

1.04

Files and rasps

SANS 1173:2006

2.01

General purpose textile-reinforced conveyor belting

(SABS 1144)

(SABS 1147)

(SABS 1150)

(SABS 1152)

(SABS 1156-2)

(SABS 1163)

(SABS 1167)

(SABS 1169)

(SABS 1171)

(SABS 1173)

Page 48

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1174:2005 (SABS 1174)

2.01

Bains-marie and hot cupboards

SANS 1175:2008

1.01

High speed steel slitting saws

SANS 1176:2010 (SABS 1176)

3.01

Self-supporting plastics containers of nominal capacities 5 L to 220 L

SANS 1177:2007

2

Terry jacquard articles

SANS 1178:2002 (SABS 1178)

1.02

The production of lined and coated steel pipes using bitumen or coal tar enamel

SANS 1182:2009

1.03

Light gauge welded steel pipes

SANS 1183:2008 (SABS 1183)

2.01

Nurses' woven uniform fabric (polyester-and-cotton)

SANS 1186-1:2008

3.05

Symbolic safety signs Part 1: Standard signs and general requirements

SANS 1186-2:2007 (SABS 1186-2)

1.02

Symbolic safety signs Part 2: Self-luminous (radioluminescent) signs

SANS 1186-3:2004

1.02

Symbolic safety signs Part 3: Internally illuminated signs

SANS 1186-4:2008 (SABS 1186-4)

1.02

Symbolic safety signs Part 4: Retro-reflective signs

SANS 1186-5:2006

1.03

Symbolic safety signs Part 5: Photoluminescent signs

SANS 1187:2009 (SABS 1187)

2.02

Tanks and ancillary equipment for milk tankers

SANS 1188:1978

1

Production of single-use hypodermic needles (sterile-packed) for dental cartridge syringes

SANS 1190:2009 (SABS 1190)

1.01

Malleable iron castings

SANS 1191:2005

1.05

High penetration-resistant laminated safety glass for vehicles

SANS 1192:2005 (SABS 1192)

1.03

Laminated safety glass for vehicles

SANS 1193:2008

2

Toughened safety glass for vehicles

SANS 1194:2006 (SABS 1194)

2

Nylon tubing for air-brake applications

SANS 1195:2008

1.02

Busbars

3

Detergent-disinfectants based on organic halogen compounds (other than iodine compounds)

(SABS 1175)

(SABS 1177)

(SABS 1182)

(SABS 1186-1)

(SABS 1186-3)

(SABS 1186-5)

(SABS 1188)

(SABS 1191)

(SABS 1193)

(SABS 1195) SANS 1196:2009 (SABS 1196)

Page 49

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1198:2005 (SABS 1198)

2

The manufacture of rubber sheeting for rubber lining

SANS 1199:2007

2.02

The production of mageu

SANS 1200 A:1986 (SABS 1200 A)

3

Standardized specification for civil engineering construction Section A: General

SANS 1200 AA:1986

3

Standardized specification for civil engineering construction Section AA: General (small works)

SANS 1200 AB:1986 (SABS 1200 AB)

3

Standardized specification for civil engineering construction Section AB: Engineer's office

SANS 1200 AD:1986

2

Standardized specification for civil engineering construction Section AD: General (Small dams)

SANS 1200 AH:1986 (SABS 1200 AH)

3

Standardized specification for civil engineering construction Section AH: General (structural)

SANS 1200 C:1980

1

Standardized specification for civil engineering construction Section C: Site clearance

SANS 1200 D:1988 (SABS 1200 D)

3

Standardized specification for civil engineering construction Section D: Earthworks

SANS 1200 DA:1988

3

Standardized specification for civil engineering construction Section DA: Earthworks (small works)

SANS 1200 DB:1989 (SABS 1200 DB)

3

Standardized specification for civil engineering construction Section DB: Earthworks (pipe trenches)

SANS 1200 DE:1984

1

Standardized specification for civil engineering construcion Section DE: Small earth dams

SANS 1200 DK:1996 (SABS 1200 DK)

3

Standardized specification for civil engineering construction Section DK: Gabions and pitching

SANS 1200 DM:1981

1

Standardized specification for civil engineering construction Section DM: Earthworks (roads, subgrade)

SANS 1200 DN:1982 (SABS 1200 DN)

2

Standardized specification for civil engineering construction Section DN: Earthworks (railway sidings)

SANS 1200 F:1983

1

Standardized specification for civil engineering construction Section F: Piling

SANS 1200 G:1982 (SABS 1200 G)

1

Standardized specification for civil engineering construction Section G: Concrete (structural)

SANS 1200 GA:1982

2

Standardized specification for civil engineering construction Section GA: Concrete (small works)

SANS 1200 GB:1984 (SABS 1200 GB)

1

Standardized specification for civil engineering construction Section GB: Concrete (ordinary buildings)

SANS 1200 GE:1984

1

Standardized specification for civil engineering construction Section GE: Precast concrete (structural)

(SABS 1199)

(SABS 1200 AA)

(SABS 1200 AD)

(SABS 1200 C)

(SABS 1200 DA)

(SABS 1200 DE)

(SABS 1200 DM)

(SABS 1200 F)

(SABS 1200 GA)

(SABS 1200 GE)

Page 50

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1200 GF:1984 (SABS 1200 GF)

1

Standardized specification for civil engineering construction Section GF: Prestressed concrete

SANS 1200 H:1990

3

Standardized specification for civil engineering construction Section H: Structural steelwork

SANS 1200 HA:1990 (SABS 1200 HA)

2

Standardized specification for civil engineering construction Section HA: Structural steelwork (sundry items)

SANS 1200 HB:1985

1

Standardized specification for civil engineering construction Section HB: Cladding and sheeting

SANS 1200 HC:1988 (SABS 1200 HC)

1

Standardized specification for civil engineering construction Section HC: Corrosion protection of structural steelwork

SANS 1200 HE:1983

1

Standardized specification for civil engineering construction Section HE: Structural aluminiumwork

SANS 1200 L:1983 (SABS 1200 L)

2

Standardized specification for civil engineering construction Section L: Medium-pressure pipe lines

SANS 1200 LB:1983

2

Standardized specification for civil engineering construction Section LB: Bedding (pipes)

SANS 1200 LC:1981 (SABS 1200 LC)

1

Standardized specification for civil engineering construction Section LC: Cable ducts

SANS 1200 LD:1982

2

Standardized specification for civil engineering construction Section LD: Sewers

SANS 1200 LE:1982 (SABS 1200 LE)

2

Standardized specification for civil engineering construction Section LE: Stormwater drainage

SANS 1200 LF:1983

1

Standardized specification for civil engineering construction Section LF: Erf connections (water)

SANS 1200 LG:1983 (SABS 1200 LG)

1

Standardized specification for civil engineering construction Section LG: Pipe jacking

SANS 1200 M:1996

2

Standardized specifications for civil engineering construction Section M: Roads (general)

SANS 1200 ME:1981 (SABS 1200 ME)

1

Standardized specification for civil engineering construction Section ME: Subbase

SANS 1200 MF:1981

1

Standardized specification for civil engineering construction Section MF: Base

SANS 1200 MFL:1996 (SABS 1200 MFL)

1

Standardized specification for civil engineering construction Section MFL: Base (light pavement structures)

SANS 1200 MG:1996

2

Civil engineering construction Section MG: Bituminous surface treatment

SANS 1200 MH:1996 (SABS 1200 MH)

3

Civil engineering construction Section MH: Asphalt base and surfacing

SANS 1200 MJ:1984

1

Standardized specification for civil engineering construction Section MJ: Segmented paving

(SABS 1200 H)

(SABS 1200 HB)

(SABS 1200 HE)

(SABS 1200 LB)

(SABS 1200 LD)

(SABS 1200 LF)

(SABS 1200 M)

(SABS 1200 MF)

(SABS 1200 MG)

(SABS 1200 MJ)

Page 51

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1200 MK:1983 (SABS 1200 MK)

1

Standardized specification for civil engineering construction Section MK: Kerbing and channelling

SANS 1200 MM:1984

1

Standardized specification for civil engineering construction Section MM: Ancillary roadworks

SANS 1200 NB:1981 (SABS 1200 NB)

1

Standardized specification for civil engineering construction Section NB: Railway sidings (trackwork)

SANS 1201:2005

1

The application of rubber linings to pipes, pipe fittings and vessels

SANS 1206:2005/ISO 1206:2001, IDT, Ed. 3

1

Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances

SANS 1207:1998/71/320/EEC:1971, MOD; 74/132/EEC:1974, MOD; 75/524/EEC:1975, MOD; 79/489/EEC:1979, MOD; ECE R13,REV 3:9999, MOD (SABS 1207)

1.04

Braking

SANS 1209:2008 (SABS 1209)

1.01

Pipe holderbats

SANS 1210:2007

1.01

Hexagon wrench keys

SANS 1211:2007 (SABS 1211)

1.02

Adjustable wrenches

SANS 1212:2005

2.04

The National Flag

SANS 1213:2002 (SABS 1213)

1.04

Mechanical cable glands

SANS 1215:2008

1.04

Concrete masonry units

SANS 1216:2002 (SABS 1216)

2.02

Solvent-emulsion degreasers

SANS 1217:2001

1.03

The production of painted and powder-coated steel pipes

SANS 1218:2008 (SABS 1218)

1.05

Hydraulic oil (anti-wear type)

SANS 1219:2007

1.05

Hand hacksaw blades

SANS 1221:2000 (SABS 1221)

2

Detergent skin cleansers

SANS 1223:2010

2.02

Fibre-cement pressure pipes and couplings

SANS 1224:2006 (SABS 1224)

1.03

Polish stripper

SANS 1225:1985

1

Ammoniated liquid detergent cleaner

(SABS 1200 MM)

(SABS 1210)

(SABS 1212)

(SABS 1215)

(SABS 1217)

(SABS 1219)

(SABS 1223)

(SABS 1225)

Page 52

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1227:2005 (SABS 1227)

1.04

Textured wall coatings, emulsion base, for interior and exterior use

SANS 1228:2009

2.01

Abrasion-resistant polymeric gloves: Lined type

SANS 1231:1993 (SABS 1231)

2

The production of half-concentrated Darrow's solution with dextrose for injections

SANS 1232:1993

2

The production of sodium bicarbonate injections of various strengths

SANS 1233:1993 (SABS 1233)

2

The production of a balanced solution of electrolytes for injection

SANS 1235:2007

1.02

Borehole cylinders

SANS 1236:2005 (SABS 1236)

1.01

Silvered glass mirrors for general use

SANS 1237:2007

3.01

Single-stage regulators for liquefied petroleum gas (LPG)

SANS 1238:2005 (SABS 1238)

2

Air-conditioning ductwork

SANS 1239:2004

2.02

Plugs, socket-outlets and couplers for industrial purposes

SANS 1240:2006 (SABS 1240)

2.01

Automatic shut-off flush valves for water closets and urinals

SANS 1241:2010

2.01

Aluminium sulfate for general purposes

SANS 1242:2008 (SABS 1242)

2.02

Pantihose and knee-highs

SANS 1243:2007

3

Pressurized paraffin-fuelled appliances

SANS 1244:1979 (SABS 1244)

1

Tubular steel framed chairs and stools

SANS 1247:2005/ISO 1247:1974, IDT, Ed. 1

1

Aluminium pigments for paints

SANS 1248:1988 (SABS 1248)

1.01

Devices to prevent the unauthorized use of motor vehicles (anti-theft devices)

SANS 1249:2007

2.04

Knitted uniform fabrics

SANS 1251:2005 (SABS 1251)

2

Engine cooling system protectors

SANS 1252:2004

2.01

Passive antennas for the reception of VHF and UHF television and VHF sound transmissions

3

Fire-doors and fire-shutters

(SABS 1228)

(SABS 1232)

(SABS 1235)

(SABS 1237)

(SABS 1239)

(SABS 1241)

(SABS 1243)

(SABS 1249)

(SABS 1252) SANS 1253:2003 (SABS 1253)

Page 53

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1255:2009 (SABS 1255)

2

Oven cleaner and grease remover

SANS 1259:2008

1.01

Dental casting gold alloys

SANS 1260:2004 (SABS 1260)

1.01

Invert bitumen emulsion

SANS 1261-1:2008

2.01

Performance requirements for retail textiles Part 1: Household piece-goods and articles

SANS 1261-2:2008

2.01

Performance requirements for retail textiles Part 2: Piece-goods for women's and girls' wear

SANS 1261-3:2008

2.01

Performance requirements for retail textiles Part 3: Piece-goods for men's and boys' wear

SANS 1263-1:2006 (SABS 1263-1)

3.01

Safety and security glazing materials for buildings Part 1: Safety performance of glazing materials under human impact

SANS 1263-2:2007

1.01

Safety and security glazing materials for buildings Part 2: Burglar-resistant and vandal-resistant glazing materials

SANS 1263-3:2007 (SABS 1263-3)

1.02

Safety and security glazing materials for buildings Part 3: Bullet-resistant glazing materials

SANS 1265:2009

1.03

Waxy oil obtained from the synthol process and from other petroleum sources

SANS 1266:2007 (SABS 1266)

2.04

Ballasts for discharge lamps (excluding tubular fluorescent lamps)

SANS 1269:2002/78/932/EEC:1978, MOD

1.01

Motor vehicle safety: Head restraints (passenger cars)

SANS 1270:2007 (SABS 1270)

3.01

General requirements for woven textile piece-goods and household articles

SANS 1271:1999

3

Mepivacaine hydrochloride injection for dental use

SANS 1272:2007 (SABS 1272)

2

Military webbing

SANS 1273:2009

2

Fasteners for roof and wall coverings in the form of sheeting

SANS 1274:2005 (SABS 1274)

2

Coatings applied by the powder-coating process

SANS 1275:2006/ISO 1275:1995, IDT, Ed. 3

1

Double-pitch precision roller chains and sprockets for transmission and conveyors

SANS 1281:2004 (SABS 1281)

1.02

Rinse aid for use in dishwashing machines

SANS 1283:2008

1.04

Modified poly(vinyl chloride) (PVC-M) pressure pipe and couplings for cold water services in underground mining

(SABS 1259)

(SABS 1263-2)

(SABS 1265)

(SABS 1269)

(SABS 1271)

(SABS 1273)

(SABS 1283)

Page 54

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1284:2007 (SABS 1284)

1.04

Bow-saw frames and blades

SANS 1285:2007

1.03

Woodworking saws for hand use

SANS 1287-1:2007 (SABS 1287-1)

1.01

Ventilation brattices and ducting Part 1: Flexible ducting

SANS 1287-2:2007

1.01

Ventilation brattices and ducting Part 2: Brattices, unsupported

SANS 1288:2008 (SABS 1288)

3.02

Preservative-treated timber

SANS 1291-1:2003

1.01

Flexible polyurethane foam sleeping mats and mattresses Part 1: Mats and mattresses having unsupported polymeric covers

SANS 1291-2:2009 (SABS 1291-2)

2.01

Flexible polyurethane foam sleeping mats and mattresses Part 2: Foam mattresses for domestic and hotel use

SANS 1292:2009

1.01

Castors for furniture

SANS 1294:2006 (SABS 1294)

2

Precast concrete manhole sections and components

SANS 1297:2001

1.01

Leather gloves

SANS 1298:2001 (SABS 1298)

1.02

Ladies' fashion handbags

SANS 1302:2008

1.01

Toothpaste

SANS 1303-1:2008 (SABS 1303-1)

1.02

Wrought copper alloys Part 1: Chemical composition of copper-zinc alloys (non-leaded and leaded)

SANS 1304:1980

1

Light ladders

SANS 1304-2:2009

1

Light ladders Part 2: Portable aluminium ladders, steps and trestles for household use

SANS 1305:2009

1.02

Sealing compounds for the building industry, onecomponent, silicone-rubber-base

SANS 1306-1:2006/ISO 228-1:2000, IDT, Ed. 4 (SABS 1306-1)

3

Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation

SANS 1306-2:1990/ISO 228-2:1987, IDT

2

Pipe threads where pressure-tight joints are not made on the threads Part 2: Verification by means of limit gauges

SANS 1307:2009 (SABS 1307)

4

Domestic solar water heaters

SANS 1308:2007

3

Plaster-of-Paris bandages

(SABS 1285)

(SABS 1287-2)

(SABS 1291-1)

(SABS 1292)

(SABS 1297)

(SABS 1302)

(SABS 1304)

(SABS 1305)

(SABS 1306-2)

(SABS 1308)

Page 55

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1309:2007 (SABS 1309)

2

Printed labels for textiles

SANS 1310:2007

1.02

Refuse bins of polymeric materials

SANS 1311:2007 (SABS 1311)

1.02

Metal clisco windows

SANS 1312:2008/EN 10312:2002, IDT, Ed. 1

1

Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions

SANS 1313-1:2002 (SABS 1313-1)

3.01

Conveyor belt idlers Part 1: Troughed belt conveyor idlers (metallic and non-metallic) for belt speeds of up to 5,0 m/s

SANS 1313-2:1998

1

Conveyor belt idlers Part 2: Link suspended idlers and fixed-form suspended idlers

SANS 1316:2007 (SABS 1316)

2.01

Cotton cellular blankets

SANS 1317:1980/ISO 3999:1977, NEQ

1

Apparatus for gamma radiography

SANS 1319:2009 (SABS 1319)

3

Zinc phosphate primer for steel

SANS 1320-1:2001

1.03

PVC gum boots Part 1: Injection-moulded gum boots

SANS 1320-2:2001 (SABS 1320-2)

1.01

PVC gum boots Part 2: Dip-moulded gum boots with pre-moulded stuck-on outer soles and heels

SANS 1320-3:2006

1.04

PVC gum boots Part 3: Injection-moulded ankle boots for men

SANS 1321-1:2009 (SABS 1321-1)

1.01

Non-metallic waste traps Part 1: Plastics waste traps

SANS 1321-2:2007

1.02

Non-metallic waste traps Part 2: Rubber waste traps

SANS 1322:2004 (SABS 1322)

1.03

Portable, non-refillable fire extinguishers (general purpose type)

SANS 1324:2006

2.02

Upholstery fabrics

SANS 1326:2008 (SABS 1326)

1.02

Sodium lauryl ether sulphate

SANS 1327:2004

1.04

Electrical connectors for towing and towed vehicles (7-pole connectors)

SANS 1329-1:2004 (SABS 1329-1)

2.04

Retro-reflective and fluorescent warning signs for road vehicles Part 1: Triangles

SANS 1329-2:2004

2.05

Retro-reflective and fluorescent warning signs for road vehicles Part 2: Abnormal load vehicle signs

(SABS 1310)

(SABS 1313-2)

(SABS 1317)

(SABS 1320-1)

(SABS 1320-3)

(SABS 1321-2)

(SABS 1324)

(SABS 1327)

(SABS 1329-2)

Page 56

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1329-3:2007 (SABS 1329-3)

2.03

Retro-reflective and fluorescent warning signs for road vehicles Part 3: Signs other than triangles, chevron signs and abnormal load vehicle signs

SANS 1329-4:2006

3.07

Retro-reflective and fluorescent warning signs for road vehicles Part 4: Retro-reflective chevron signs

SANS 1329-5:2006 (SABS 1329-5)

1.04

Retro-reflective and fluorescent warning signs for road vehicles Part 5: Retro-reflective chevron decals

SANS 1330:1981

1

Waterless hand cleaners

SANS 1337:1982 (SABS 1337)

1

Dental zinc oxide-eugenol impression paste

SANS 1338:2008

1.01

Abrasion-resisting white cast irons

SANS 1339:2006 (SABS 1339)

3.02

Electric cables - Cross-linked polyethylene (XLPE) insulated cables for rated voltages 3,8/6,6 kV to 19/33 kV

SANS 1341:2003

1.02

Detergent for high-pressure cleaning (hot and steam cleaning)

SANS 1343:2009 (SABS 1343)

3

Insecticidal solid fumigants that contain aluminium phosphide (food storage premises)

SANS 1344:2009

2.01

Medium duty solvent detergent

SANS 1348:2005 (SABS 1348)

1.02

Polyvinyl acetate dispersion adhesives for wood

SANS 1350:2005

1.02

Guardrails for roads (W-section)

SANS 1351:2007 (SABS 1351)

2

Canvas tentage and tarpaulin webbing

SANS 1356:2006

2

Fixed electric instantaneous water heaters

SANS 1357:2008 (SABS 1357)

1.01

Granite surface plates and tables

SANS 1360-1:2008

1.02

Size designation of clothes Part 1: Men's and boys' outerwear garments

SANS 1360-2:2008 (SABS 1360-2)

1.02

Size designation of clothes Part 2: Women's and girls' outerwear garments

SANS 1360-3:2008

1.02

Size designation of clothes Part 3: Infants' garments

SANS 1360-4:2008 (SABS 1360-4)

1.02

Size designation of clothes Part 4: Gloves

SANS 1360-5:2008

1.02

Size designation of clothes Part 5: Headwear

(SABS 1329-4)

(SABS 1330)

(SABS 1338)

(SABS 1341)

(SABS 1344)

(SABS 1350)

(SABS 1356)

(SABS 1360-1)

(SABS 1360-3)

(SABS 1360-5)

Page 57

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1360-6:2008 (SABS 1360-6)

1.01

Size designation of clothes Part 6: Men's and boys' underwear, nightwear and shirts

SANS 1360-7:2008

1.01

Size designation of clothes Part 7: Women's and girls' underwear, nightwear, foundation garments and shirts

SANS 1362:2008 (SABS 1362)

2.08

Sewing threads

SANS 1363:1999

2

Young people's shoes (stuck-on and stitch-down constructions)

SANS 1365:2009 (SABS 1365)

3

Solvent degreasers that contain chlorinated hydrocarbons

SANS 1366:2006

2.01

Steel cord reinforced conveyor belting

SANS 1367-1:2007 (SABS 1367-1)

2

Horticultural mineral oils for use on agricultural crops Part 1: Base oils

SANS 1367-2:2007

2

Horticultural mineral oils for use on agricultural crops Part 2: Monophase emulsifiable concentrates

SANS 1370:2007 (SABS 1370)

1.02

Fluxes for the submerged arc welding of carbon and carbon manganese steels

SANS 1371:2008

1.02

Ceramic hollow insulators for standard transformer bushings

SANS 1372:2010 (SABS 1372)

1.03

Prefabricated concrete components for fences

SANS 1373:2008

1.01

Chain-link fencing and its wire accessories

SANS 1374:2008 (SABS 1374)

2.01

Toothbrushes

SANS 1375:2005

3.01

Textile floor coverings (pile construction)

SANS 1376-1:2008 (SABS 1376-1)

1.06

Lights for motor vehicles Part 1: Incandescent lamps

SANS 1376-2:2006

1.04

Lights for motor vehicles Part 2: Headlights

SANS 1376-3:2006 (SABS 1376-3)

1.05

Lights for motor vehicles Part 3: Secondary lights

SANS 1381-1:2007

3.01

Materials for thermal insulation of buildings Part 1: Fibre thermal insulation mats

SANS 1381-2:2007 (SABS 1381-2)

1.01

Materials for thermal insulation of buildings Part 2: Loose fill thermal insulation material

SANS 1381-4:2009

2

Materials for thermal insulation of buildings Part 4: Reflective foil laminates (rolls, sheets and sections)

1

Materials for thermal insulation of buildings Part 6: Cellulose loose fill thermal insulation material

(SABS 1360-7)

(SABS 1363)

(SABS 1366)

(SABS 1367-2)

(SABS 1371)

(SABS 1373)

(SABS 1375)

(SABS 1376-2)

(SABS 1381-1)

(SABS 1381-4) SANS 1381-6:1994 (SABS 1381-6)

Page 58

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1382-1:2008 (SABS 1382-1)

2.02

Hose Part 1: Men's and women's hose for institutional use

SANS 1382-2:2008

1.02

Hose Part 2: Commercial and sports hose

SANS 1383:2008 (SABS 1383)

1.01

Rigid urethane and isocyanurate foams for use in thermal insulation

SANS 1384:2006

2

Plastics containers for parenteral solutions

SANS 1385:2008 (SABS 1385)

1.01

Kitchen cupboards: Built-in and free-standing

SANS 1387 SET:2009

2.01

Woven cotton and similar apparel fabrics Parts 1 11, bound together, loose-leaf

SANS 1387-1:2009 (SABS 1387-1)

2.01

Woven cotton and similar apparel fabrics Part 1: Basic requirements

SANS 1387-2:2009

2.01

Woven cotton and similar apparel fabrics Part 2: Polyester-and-cotton workwear fabrics

SANS 1387-3:2009 (SABS 1387-3)

2.01

Woven cotton and similar apparel fabrics Part 3: Polyester-and-viscose workwear fabrics

SANS 1387-4:2009

2.01

Woven cotton and similar apparel fabrics Part 4: Cotton jean and drill fabrics

SANS 1387-5:2009 (SABS 1387-5)

2.01

Woven cotton and similar apparel fabrics Part 5: Cotton flannelette fabrics

SANS 1387-6:2009

2.01

Woven cotton and similar apparel fabrics Part 6: Denim fabrics

SANS 1387-7:2009 (SABS 1387-7)

2.01

Woven cotton and similar apparel fabrics Part 7: Jacket linings

SANS 1387-8:2009

2.01

Woven cotton and similar apparel fabrics Part 8: Cotton dress fabrics

SANS 1387-9:2009 (SABS 1387-9)

2.01

Woven cotton and similar apparel fabrics Part 9: Polyester-and-cotton shirt fabrics

SANS 1387-10:2009

2.01

Woven cotton and similar apparel fabrics Part 10: Pocketing

SANS 1387-11:2009 (SABS 1387-11)

2.01

Woven cotton and similar apparel fabrics Part 11: Polyester-and-cellulosic raincoat fabrics

SANS 1389:2009

1.01

Tables

SANS 1390:2005 (SABS 1390)

1.02

Steel fencing for private swimming pools

SANS 1394-1:2009

2.03

Duvets and pillows Part 1: Plumage filled

1.02

Duvets and pillows Part 2: Synthetic-fibre filled

(SABS 1382-2)

(SABS 1384)

(SABS 1387 SET)

(SABS 1387-2)

(SABS 1387-4)

(SABS 1387-6)

(SABS 1387-8)

(SABS 1387-10)

(SABS 1389)

(SABS 1394-1) SANS 1394-2:2003 (SABS 1394-2)

Page 59

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1396:2008 (SABS 1396)

2.01

Wooden scaffold boards

SANS 1397:2003/EN 397:1995, IDT, Ed. 1

1

Industrial safety helmets

SANS 1399:2008 (SABS 1399)

2.03

Wood charcoal and charcoal briquettes for household use

SANS 1400:1993

2

Equipment (including oculars) for eye, face and neck protection against non-ionizing radiation arising during welding and similar operations - Welding helmets, handshields, goggles and welding spectacles

2.01

Woven cotton and similar household fabrics and articles Parts 1 - 15, bound together, loose-leaf

SANS 1401-1:2007 (SABS 1401-1)

2.01

Woven cotton and similar household fabrics and articles Part 1: Basic requirements for piece-goods and made-up articles

SANS 1401-2:2007

2.01

Woven cotton and similar household fabrics and articles Part 2: Winter sheeting, sheets and pillowcases

SANS 1401-3:2007 (SABS 1401-3)

2.01

Woven cotton and similar household fabrics and articles Part 3: Cotton sheeting, sheets, and pillowcases

SANS 1401-4:2007

2.01

Woven cotton and similar household fabrics and articles Part 4: Polyester-and-cotton sheeting, sheets and pillowcases

SANS 1401-5:2007 (SABS 1401-5)

2.01

Woven cotton and similar household fabrics and articles Part 5: Terry towelling, towels, and other terry weave articles

SANS 1401-6:2007

2.01

Woven cotton and similar household fabrics and articles Part 6: Cotton curtain fabrics

SANS 1401-7:2007 (SABS 1401-7)

2.01

Woven cotton and similar household fabrics and articles Part 7: Cotton curtain lining

SANS 1401-8:2007

2.01

Woven cotton and similar household fabrics and articles Part 8: Bedspread fabrics and bedspreads

SANS 1401-9:2007 (SABS 1401-9)

2.01

Woven cotton and similar household fabrics and articles Part 9: Cotton flannelette duster fabric and dusters

SANS 1401-10:2007

2.01

Woven cotton and similar household fabrics and articles Part 10: Cotton ticking

SANS 1401-11:2007 (SABS 1401-11)

2.01

Woven cotton and similar household fabrics and articles Part 11: Featherproof fabrics

SANS 1401-12:2007

2.01

Woven cotton and similar household fabrics and articles Part 12: Kitchen cloth fabric and kitchen cloths

SANS 1401-13:2007 (SABS 1401-13)

2.01

Woven cotton and similar household fabrics and articles Part 13: Cotton huckaback towelling and towels

SANS 1401-14:2007

2.01

Woven cotton and similar household fabrics and articles Part 14: Cotton table-cloth fabric, tablecloths, and table napkins

(SABS 1400)

SANS 1401 (PARTS 1-15):2007 (SABS 1401 (PARTS 1-15))

(SABS 1401-2)

(SABS 1401-4)

(SABS 1401-6)

(SABS 1401-8)

(SABS 1401-10)

(SABS 1401-12)

(SABS 1401-14)

Page 60

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1401-15:2007 (SABS 1401-15)

2.01

Woven cotton and similar household fabrics and articles Part 15: Cotton dishcloth fabrics and dishcloths

SANS 1402-1:2008

1.02

Acrylic sanitary ware Part 1: Baths

SANS 1404:2009 (SABS 1404)

3

Eye-protectors for industrial and non-industrial use

SANS 1406:2006

3

Commercial refrigerated food display cabinets

SANS 1407:2007 (SABS 1407)

2.01

Anodized coatings on aluminium (for general applications)

SANS 1408:2002

2

Mechanical components for tendon based rock support systems

SANS 1409:2008 (SABS 1409)

1.04

Outlet sockets and probes for medical (gas and vacuum) services used in hospitals

SANS 1411-1:2008

2.01

Materials of insulated electric cables and flexible cords Part 1: Conductors

SANS 1411-2:2009 (SABS 1411-2)

2.02

Materials of insulated electric cables and flexible cords Part 2: Polyvinyl chloride (PVC)

SANS 1411-3:2009

2.02

Materials of insulated electric cables and flexible cords Part 3: Elastomers

SANS 1411-4:2009 (SABS 1411-4)

2.02

Materials of insulated electric cables and flexible cords Part 4: Cross-linked polyethylene (XLPE)

SANS 1411-5:2009

3.01

Materials of insulated electric cables and flexible cords Part 5: Halogen-free, flame-retardant materials

SANS 1411-6:2008 (SABS 1411-6)

2.01

Materials of insulated electric cables and flexible cords Part 6: Armour

SANS 1411-7:2009

2.01

Materials of insulated electric cables and flexible cords Part 7: Polyethylene (PE)

SANS 1415:2009 (SABS 1415)

2.02

Textile floor coverings (needle-punched construction)

SANS 1416:2005

1.03

Alkali-resistant plaster primer (pigmented, solventtype)

SANS 1418-1:2009 (SABS 1418-1)

1.07

Aerial bundled conductor systems Part 1: Cores

SANS 1418-2:2009

1.05

Aerial bundled conductor systems Part 2: Assembled insulated conductor bundles

SANS 1419:2009 (SABS 1419)

2.02

Carpet underlays

SANS 1420:2009

1.01

Bed bases (spring upholstered)

(SABS 1402-1)

(SABS 1406)

(SABS 1408)

(SABS 1411-1)

(SABS 1411-3)

(SABS 1411-5)

(SABS 1411-7)

(SABS 1416)

(SABS 1418-2)

(SABS 1420)

Page 61

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1421:1998/ISO 1421:1998, IDT, Ed. 2 (SABS ISO 1421)

1

Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break

SANS 1422:2006

2

Domestic electric laundry treatment machines

SANS 1423-1:2008 (SABS 1423-1)

1.01

Performance requirements for textile fabrics of low flammability Part 1: Apparel fabrics

SANS 1423-2:2009

1.03

Performance requirements for textile fabrics of low flammability Part 2: Curtain and drape fabrics

SANS 1423-3:2004 (SABS 1423-3)

2

Performance requirements for textile fabrics of low flammability Part 3: Upholstery fabrics

SANS 1423-4:2004

2

Performance requirements for textile fabrics of low flammability Part 4: Bedding fabrics, bedcovers and pillows

SANS 1423-5:2008 (SABS 1423-5)

1.01

Performance requirements for textile fabrics of low flammability Part 5: Fabrics for use in movable office partitions

SANS 1424:2008

1.01

Filters for use in air-conditioning and general ventilation

SANS 1427:2006 (SABS 1427)

2

Conforming bandages

SANS 1429:1987/74/408/EEC:1974, MOD; 81/577/EECAI & AIII:1981, MOD (SABS 1429)

1

Motor vehicle safety: Strength of seats and their anchorages

SANS 1430:2007 (SABS 1430)

1.02

Anchorages for restraining devices in motor vehicles

SANS 1431:2007

1.08

Weldable structural steels

SANS 1433-1:2008 (SABS 1433-1)

1.01

Electrical terminals and connectors Part 1: Terminal blocks having screw and screwless terminals

SANS 1433-2:2008

1.01

Electrical terminals and connectors Part 2: Flat push-on connectors

SANS 1436:1994/71/127/EEC:1971, NEQ; 79/795/EEC:1979, NEQ; 85/205/EEC:1985, NEQ; 88/321/EEC:1988, NEQ (SABS 1436)

1.01

The rear-view mirrors of motor vehicles of categories M and N (Incorporating EEC Directive 71/127, as amended by EEC Directives 79/795, 85/205 and 88/321, relating to the rear-view mirrors of motor vehicles, with modifications)

SANS 1437:2003

2

Footwear soling material and footwear sole and heel components of rubber and plastics

SANS 1438-1:1987 (SABS 1438-1)

1

Helmet light assemblies for miners Part 1: Incandescent lamps

SANS 1438-2:1987

1

Helmet light assemblies for miners Part 2: Lead-acid batteries

1.04

Helmet light assemblies for miners Part 3: Cables

(SABS 1422)

(SABS 1423-2)

(SABS 1423-4)

(SABS 1424)

(SABS 1431)

(SABS 1433-2)

(SABS 1437)

(SABS 1438-2) SANS 1438-3:2005 (SABS 1438-3)

Page 62

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1438-4:1987 (SABS 1438-4)

1

Helmet light assemblies for miners Part 4: Helmet lights (headlights)

SANS 1438-5:1987

1

Helmet light assemblies for miners Part 5: Helmet light assemblies

SANS 1439:2008 (SABS 1439)

2.04

Automotive upholstery fabrics

SANS 1440:1987/74/297/EEC:1974, MOD

1

Motor vehicle safety: The steering mechanism of motor vehicles (Category M1 only): Behaviour on impact

SANS 1441:2006/75/443/EEC:1975, MOD; ECE R39:1983, MOD (SABS 1441)

2

Speedometer equipment on motor vehicles

SANS 1442:2008

1.03

Roadstuds

SANS 1443:1987/70/387/EEC:1970, MOD (SABS 1443)

1

Motor vehicle safety: Door latches and hinges

SANS 1444 SET:2009

2.02

Schoolwear fabrics Parts 1 - 8, bound together, loose leaf, binder extra

SANS 1444-1:2009 (SABS 1444-1)

2.02

Schoolwear fabrics Part 1: Basic requirements

SANS 1444-2:2009

2.02

Schoolwear fabrics Part 2: Blazer fabrics

SANS 1444-3:2009 (SABS 1444-3)

2.02

Schoolwear fabrics Part 3: Polyester-and-wool fabrics

SANS 1444-4:2009

2.02

Schoolwear fabrics Part 4: Polyester-and-viscose fabrics

SANS 1444-5:2009 (SABS 1444-5)

2.02

Schoolwear fabrics Part 5: Polyester-and-cotton fabrics

SANS 1444-6:2009

2.02

Schoolwear fabrics Part 6: Shirting and blouse fabrics

SANS 1444-7:2009 (SABS 1444-7)

2.02

Schoolwear fabrics Part 7: Fabrics containing textured yarns

SANS 1444-8:2009

2.02

Schoolwear fabrics Part 8: Warp-knitted fabrics

SANS 1445-2:2008 (SABS 1445-2)

1.01

Thermal insulation materials for industrial applications Part 2: Metal-mesh-faced mineral fibre mattresses

SANS 1445-3:2008

1.01

Thermal insulation materials for industrial applications Part 3: Bonded preformed mineral fibre pipe sections

SANS 1446:2007 (SABS 1446)

1.02

Glass rovings

SANS 1447-1:2007

2.01

Braking (motor and towed vehicles, designed for low speed or for use off public roads) Part 1: Low speed vehicles

(SABS 1438-5)

(SABS 1440)

(SABS 1442)

(SABS 1444 SET)

(SABS 1444-2)

(SABS 1444-4)

(SABS 1444-6)

(SABS 1444-8)

(SABS 1445-3)

(SABS 1447-1)

Page 63

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1447-2:2007 (SABS 1447-2)

2.01

Braking (motor and towed vehicles, designed for low speed or for use off public roads) Part 2: Low speed trailers

SANS 1448:2006

2

Wax emulsion for coating citrus fruit

SANS 1449:2008 (SABS 1449)

2.01

Ceramic wall and floor tiles

SANS 1451-1:2008

1.02

Hearing protectors Part 1: Ear-muffs

SANS 1451-2:2008 (SABS 1451-2)

1.01

Hearing protectors Part 2: Ear-plugs

SANS 1451-3:2008

1.02

Hearing protectors Part 3: Ear-muffs attached to an industrial safety helmet

SANS 1452:2005 (SABS 1452)

1.01

Overhead projectors

SANS 1453:2010

1.03

Copper tubes for medical gas and vacuum services

SANS 1456-1:2007 (SABS 1456-1)

1.02

Collapsible delivery hose for fire fighting purposes Part 1: General requirements and methods of test

SANS 1456-2:2007

1.03

Collapsible delivery hose for fire fighting purposes Part 2: Percolating fire hose

SANS 1456-3:2007 (SABS 1456-3)

1.02

Collapsible delivery hose for fire fighting purposes Part 3: Uncoated non-percolating fire hose

SANS 1456-4:2007

1.03

Collapsible delivery hose for fire fighting purposes Part 4: Coated non-percolating fire hose

SANS 1456-5:2007 (SABS 1456-5)

1.03

Collapsible delivery hose for fire fighting purposes Part 5: Oil-resistant and chemical-resistant fire hose

SANS 1457:2008

1.01

Plastics buttons

SANS 1459:2004 (SABS 1459)

1.04

Traffic lights

SANS 1460:2006

1.04

Laminated timber (glulam)

SANS 1463-1:2007/EN 1463-1:1997, IDT, Ed. 1

1

Road marking materials - Retroreflecting road studs Part 1: Initial performance requirements

SANS 1463-2:2007/EN 1463-2:2000, IDT, Ed. 1

1

Road marking materials - Retroreflecting road studs Part 2: Road test performance specifications

SANS 1464-22:2007 (SABS 1464-22)

1.03

Safety of luminaires Part 22: Luminaires for emergency lighting

SANS 1465-1:2008

1.01

Steel castings for general engineering applications Part 1: Carbon and low alloy steel castings

(SABS 1448)

(SABS 1451-1)

(SABS 1451-3)

(SABS 1453)

(SABS 1456-2)

(SABS 1456-4)

(SABS 1457)

(SABS 1460)

(SABS 1465-1)

Page 64

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1465-2:2008 (SABS 1465-2)

1.01

Steel castings for general engineering applications Part 2: Wear-resistant carbon and low alloy steel castings

SANS 1465-3:2008

1.01

Steel castings for general engineering applications Part 3: Corrosion-resistant and heat-resistant steel castings

SANS 1467:2007 (SABS 1467)

1.02

Narrow bandsaw blades

SANS 1468:2006/82/953/EEC:1982, MOD; 79/622/EEC:1979, MOD (SABS 1468)

1.01

Roll-over protection structures for wheeled agricultural or forestry tractors (static testing)(Incorporating EEC Directive 79/622, as amended by EEC Directive 82/953, relating to the roll-over protection structures of wheeled agricultural or forestry tractors (static testing), with modifications)

SANS 1470-1:2008

1.02

Sound power labelling Part 1: Compressors

SANS 1470-2:2008 (SABS 1470-2)

1.02

Sound power labelling Part 2: Welding generators

SANS 1470-3:2008

2

Sound power labelling Part 3: Rotating electrical machinery

SANS 1470-4:2008 (SABS 1470-4)

2

Sound power labelling Part 4: Pneumatic equipment

SANS 1471:1996/EN 1471:1996, IDT, Ed. 1

1

Textile floor coverings - Assessment of changes in appearance

SANS 1472:2005 (SABS 1472)

1.01

Plastics safety glazing materials for motor vehicles

SANS 1475-1:2006

3.03

The production of reconditioned fire-fighting equipment Part 1: Portable and wheeled (mobile) rechargeable fire extinguishers

SANS 1475-2:2008 (SABS 1475-2)

4

The production of reconditioned fire-fighting equipment Part 2: Fire hose reels, hydrants and booster connections

SANS 1476:2009

1.02

Fabricated flanged steel pipework

SANS 1477-1:2008 (SABS 1477-1)

2

Pneumatic braking system connections between drawing and drawn vehicles Part 1: Contact type couplings

SANS 1477-2:2005

1.01

Pneumatic braking system connections between drawing and drawn vehicles Part 2: Palm type couplings

SANS 1477-3:2005 (SABS 1477-3)

1.02

Pneumatic braking system connections between drawing and drawn vehicles Part 3: The arrangement of connections on vehicles, using contact type or palm type couplings

SANS 1480:2005

1.02

Single control mixer taps

2

Ladies' shoes, flat lasted, with stuck-on outer soles

(SABS 1465-3)

(SABS 1470-1)

(SABS 1470-3)

(SABS EN 1471)

(SABS 1475-1)

(SABS 1476)

(SABS 1477-2)

(SABS 1480) SANS 1482:2008 (SABS 1482)

Page 65

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1484:2007 (SABS 1484)

2

Permitted explosives

SANS 1485:2007

1.01

Flexible intermediate bulk containers

SANS 1486-1:2006 (SABS 1486-1)

1.02

Domestic electric floor treatment machines Part 1: Vacuum cleaners

SANS 1486-2:2006

1.02

Domestic electric floor treatment machines Part 2: Floor polishers

SANS 1489:2001 (SABS 1489)

2.01

Flameproof restrained and bolted type plugs and sockets

SANS 1490:1989

1

Commercial ammunition

SANS 1491-1:2005 (SABS 1491-1)

2

Portland cement extenders Part 1: Ground granulated blast-furnace slag

SANS 1491-2:2005

2

Portland cement extenders Part 2: Fly ash

SANS 1491-3:2006 (SABS 1491-3)

2.01

Portland cement extenders Part 3: Silica fume

SANS 1492-1:2008

2

Men's shoes with stuck-on outer soles Part 1: Flat lasted construction

SANS 1492-2:2008 (SABS 1492-2)

2

Men's shoes with stuck-on outer soles Part 2: California type construction

SANS 1492-3:2008

2

Men's shoes with stuck-on outer soles Part 3: Moccasin type construction

SANS 1493:2007 (SABS 1493)

1.01

Electroless nickel-phosphorus plated coatings

SANS 1494:2007

1.01

Mobile refuse bins

SANS 1496:2008 (SABS 1496)

1.04

Wheel flaps fitted to motor vehicles

SANS 1497:2006

2

Biocides for use in industrial cooling water

SANS 1498:2007 (SABS 1498)

2

Algaecides for use in industrial cooling water

SANS 1502:2008

2.04

Microwave cooking appliances for domestic use

SANS 1504:1990 (SABS 1504)

1

Prestressed concrete lintels

SANS 1505-1:2007

2.03

Ball type couplings and towing brackets for towing caravans and light trailers Part 1: Towing brackets and integrated towing devices

(SABS 1485)

(SABS 1486-2)

(SABS 1490)

(SABS 1491-2)

(SABS 1492-1)

(SABS 1492-3)

(SABS 1494)

(SABS 1497)

(SABS 1502)

(SABS 1505-1)

Page 66

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1505-2:2007 (SABS 1505-2)

2.03

Ball type couplings and towing brackets for towing caravans and light trailers Part 2: Coupling balls and ball supports

SANS 1505-3:2007

2.03

Ball type couplings and towing brackets for towing caravans and light trailers Part 3: Coupling sockets

SANS 1507-1:2007 (SABS 1507-1)

1.01

Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 1: General

SANS 1507-2:2007

1.01

Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 2: Wiring cables

SANS 1507-3:2007 (SABS 1507-3)

1.01

Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 3: PVC Distribution cables

SANS 1507-4:2009

1.02

Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 4: XLPE Distribution cables

SANS 1507-5:2009 (SABS 1507-5)

1.02

Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 5: Halogen-free distribution cables

SANS 1507-6:2007

1.02

Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 6: Service cables

SANS 1508:2007 (SABS 1508)

1.01

Expanded polystyrene thermal insulation boards

SANS 1509:2008

2.01

Flush valves for WC flushing cisterns

SANS 1510-1:2008 (SABS 1510-1)

1.01

Door closers Part 1: Single-action overhead door closers

SANS 1515-1:2006/IEC 61779-1:1998, MOD, Ed. 1; IEC 61779-2:1998, MOD, Ed. 1 (SABS 1515-1)

2.01

Gas measuring equipment primarily for use in mines Part 1: Battery-operated portable, flammable gas measuring instruments and warning devices

SANS 1515-2:2006

1

Gas measuring equipment primarily for use in mines Part 2: Fixed, transportable, and vehicle-mounted flammable gas measuring and warning sensor heads and instruments

SANS 1516:2005 (SABS 1516)

3

High performance engine lubricating oil for petrol engines (for API Service Category SJ)

SANS 1517:2005

3

High performance engine lubricating oil for diesel engines (for API Service Category CH-4)

SANS 1518:2008 (SABS 1518)

3

Transport of dangerous goods - Design, construction, testing, approval and maintenance of road vehicles and portable tanks

SANS 1519-1:2006

2.02

Road signs Part 1: Retro-reflective sheeting material

SANS 1519-2:2004 (SABS 1519-2)

1.01

Road signs Part 2: Performance requirements for road signs

SANS 1520-1:2008

1.1

Flexible electric trailing cables for use in mines Part 1: Low-voltage (640/1 100 V and 1 900/3 300 V) cables

(SABS 1505-3)

(SABS 1507-2)

(SABS 1507-4)

(SABS 1507-6)

(SABS 1509)

(SABS 1517)

(SABS 1519-1)

(SABS 1520-1)

Page 67

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1520-2:2008 (SABS 1520-2)

1.08

Flexible electric trailing cables for use in mines Part 2: High-voltage (3,8/6,6 kV to 19/33 kV) cables

SANS 1522:2004

2.01

Fire extinguishing powders

SANS 1523:1990 (SABS 1523)

1

Sheepskins (for medical use)

SANS 1524-1:2005

4.01

Electricity payment systems Part 1: Prepayment meters

SANS 1526:2003 (SABS 1526)

2

Thermoplastics sheeting for use as a geomembrane

SANS 1527:1991

1

Cash ticket-issuing machines for public transport (not for use with magnetic stripe tickets)

SANS 1528-1:2008 (SABS 1528-1)

1.01

Furniture Part 1: Seating

SANS 1528-2:2008

1.02

Furniture Part 2: Desks, tables and computer stands

SANS 1528-3:2009 (SABS 1528-3)

1.02

Furniture Part 3: Storage units

SANS 1528-4:2008

1.01

Furniture Part 4: Bunk beds for domestic use

SANS 1528-6:2008 (SABS 1528-6)

1.01

Furniture Part 6: High chairs for domestic use

SANS 1528-7:2008

1.01

Furniture Part 7: Children's cots for domestic use

SANS 1529-1:2006 (SABS 1529-1)

2.03

Water meters for cold potable water Part 1: Metrological characteristics of mechanical water meters of nominal bore not exceeding 100 mm

SANS 1529-3:2006

1.01

Water meters for cold potable water Part 3: Physical dimensions

SANS 1529-4:2004 (SABS 1529-4)

1.01

Water meters for cold potable water Part 4: Mechanical meters of nominal bore exceeding 100 mm but not exceeding 800 mm

SANS 1529-9:2008

2.01

Water meters for cold potable water Part 9: Requirements for electronic indicators used with mechanical water meters, electronic water meters and electronic prepayment water measuring systems

1

Prefabricated panels for thermal insulation Part 1: Panels with two impervious facing sheets

SANS 1531:2003 (SABS 1531)

2

Wood-cased pencils and extruded plastics pencils, with graphite lead and coloured lead

SANS 1532:2003

2

Vent valves for drainage installations

1.04

Padlocks

(SABS 1522)

(SABS 1524-1)

(SABS 1527)

(SABS 1528-2)

(SABS 1528-4)

(SABS 1528-7)

(SABS 1529-3)

(SABS 1529-9)

SANS 1530-1:1991 (SABS 1530-1)

(SABS 1532) SANS 1533:2005 (SABS 1533)

Page 68

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1534:2004 (SABS 1534)

1.04

Resin capsules for use with tendon based support systems

SANS 1535:2007

2.03

Glass-reinforced polyester-coated steel tanks for the underground storage of hydrocarbons and oxygenated solvents and intended for burial horizontally

1.02

Plain-woven glass rovings for glass-reinforced plastics laminates

SANS 1539:2008 (SABS 1539)

4.02

Appliances operating on liquefied petroleum gas Safety aspects

SANS 1540:1992

1

Men's and women's leather belts

SANS 1542:1993 (SABS 1542)

1.01

Safety helmets for pedal cyclists

SANS 1543:2006

2.01

Escalators and passenger conveyors

SANS 1545-1:2009 (SABS 1545-1)

3.03

Safety rules for the construction and installation of lifts Part 1: Electric lifts

SANS 1545-2:2009

3.03

Safety rules for the construction and installation of lifts Part 2: Hydraulic lifts

SANS 1545-3:2006 (SABS 1545-3)

1.03

Safety rules for the construction and installation of lifts Part 3: Lifts for persons with disabilities (stairlifting platforms)

SANS 1545-4:2006

1.02

Safety rules for the construction and installation of lifts Part 4: Lifts for persons with disabilities (vertical lifting platforms)

SANS 1545-5:2007 (SABS 1545-5)

1.01

Safety rules for the construction and installation of lifts Part 5: Electric and hydraulic access, goods only lifts

SANS 1545-6:2006

1.01

Safety rules for the construction and installation of lifts Part 6: Rack-and-pinion lifts

SANS 1545-7:2007

1

Safety rules for the construction and installation of lifts Part 7: Electric and hydraulic service lifts (dumb waiters)

SANS 1545-9:2004

1

Safety rules for the construction and installation of lifts Part 9: Lift landing doors - Fire resistance testing

SANS 1547:2009 (SABS 1547)

1.04

Traffic signal controllers

SANS 1550-1:2005

2.01

Motor vehicle tyres and rims - Dimensions and loads Part 1: General

SANS 1550-2:2006 (SABS 1550-2)

2.01

Motor vehicle tyres and rims - Dimensions and loads Part 2: Passenger car tyres

SANS 1550-3:2006

2.01

Motor vehicle tyres and rims - Dimensions and loads Part 3: Commercial vehicle tyres

2.01

Motor vehicle tyres and rims - Dimensions and loads Part 4: Motorcycle and scooter tyres

(SABS 1535)

SANS 1538:2008 (SABS 1538)

(SABS 1540)

(SABS 1543)

(SABS 1545-2)

(SABS 1545-4)

(SABS 1550-1)

(SABS 1550-3) SANS 1550-4:2005 (SABS 1550-4)

Page 69

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1550-5:2006 (SABS 1550-5)

2.01

Motor vehicle tyres and rims - Dimensions and loads Part 5: Off-the-road vehicle tyres

SANS 1550-6:2005

2.01

Motor vehicle tyres and rims - Dimensions and loads Part 6: Agricultural vehicle tyres

SANS 1550-7:2005 (SABS 1550-7)

2.01

Motor vehicle tyres and rims - Dimensions and loads Part 7: Industrial vehicle tyres

SANS 1550-10:2006

2.01

Motor vehicle tyres and rims - Dimensions and loads Part 10: Rim contours

SANS 1551-1:2008 (SABS 1551-1)

1.02

Check valves (flanged and wafer types) Part 1: PN series

SANS 1551-2:2007

1.02

Check valves (flanged and wafer types) Part 2: Class series

SANS 1553-1:2007 (SABS 1553-1)

1.01

PVC-U window and door frames for external use Part 1: PVC-U profiles for window and door frames

SANS 1553-2:2007

1.01

PVC-U window and door frames for external use Part 2: Windows with frames made from PVC-U profiles

SANS 1555:2008 (SABS 1555)

2

Roadworks delineators

SANS 1556-1:2005

1.02

ISO metric screw threads Part 1: Principles and basic data for general purpose screw threads

SANS 1556-2:2005 (SABS 1556-2)

1.01

ISO metric screw threads Part 2: Selected limits of size for general purpose screw threads

SANS 1557:2009

3

Sunscreen products

SANS 1561-1:2006 (SABS 1561-1)

2

Rewound and refurbished rotating electrical machines Part 1: Low-voltage three-phase induction motors

SANS 1563:2005/ECE R66:1988, MOD, Ed. 1

1.01

The strength of large passenger vehicle superstructures (roll-over protection)

SANS 1564:2005/ECE R80:1989, MOD, Ed. 1 (SABS 1564)

1.01

The strength of seats (and their anchorages) of large passenger buses

SANS 1567:2003

2

Portable rechargeable fire extinguishers - CO2 type extinguishers

SANS 1572:2007 (SABS 1572)

1.01

CO2 gas cartridges (steel)

SANS 1574-1:2008

1.01

Electric flexible cores, cords and cables with solid extruded dielectric insulation Part 1: General

SANS 1574-3:2007

1

Electric flexible cores, cords and cables with solid extruded dielectric insulation Part 3: PVC-insulated cores and cables

SANS 1574-4:2007

1

Electric flexible cores, cords and cables with solid extruded dielectric insulation Part 4: Rubberinsulated cores and cords

(SABS 1550-6)

(SABS 1550-10)

(SABS 1551-2)

(SABS 1553-2)

(SABS 1556-1)

(SABS 1557)

(SABS 1563)

(SABS 1567)

Page 70

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1574-5:2007

1

Electric flexible cores, cords and cables with solid extruded dielectric insulation Part 5: Rubberinsulated cores and cables

SANS 1575:2007

1.01

Burnt clay paving units

SANS 1576:2008 (SABS 1576)

1.02

Electric cables - Single core arc welding cable

SANS 1578:2006

1.03

Durable organic powders for coating of external architectural aluminium

SANS 1579:2007 (SABS 1579)

1.02

Liquid metal polish

SANS 1580:2005

1.02

Hexagonal steel wire mesh gabions and revet mattresses

SANS 1581:2006 (SABS 1581)

1.02

Erasers made from plasticized PVC

SANS 1582-1:2008

1.04

Light industrial electric floor treatment machines Part 1: Vacuum cleaners

SANS 1582-2:2008 (SABS 1582-2)

1.04

Light industrial electric floor treatment machines Part 2: Floor polishers

SANS 1584-1:2008

1.01

Television transmissions Part 1: Terrestrial television transmissions

SANS 1584-3:2006 (SABS 1584-3)

1.01

Television transmissions Part 3: NICAM transmissions

SANS 1585:2008

2.01

Coated fabrics for shelters and rainwear

SANS 1586:2007 (SABS 1586)

1.03

Emulsion paints

SANS 1587:2007

1.01

Protection equipment for the front of motor vehicles

SANS 1588:2006 (SABS 1588)

1.01

Shatter-resistant plastics rulers

SANS 1589:1994

1

The braking performance of trackless underground mining vehicles - Load haul dumpers and dump trucks

SANS 1592:2005 (SABS 1592)

1.02

Short-link steel chain (close-tolerance) for lifting appliances

SANS 1593:1994

1

Disinfectants based on glutaraldehyde for use on medical instruments

SANS 1594:2007 (SABS 1594)

2.01

Manually operated chain blocks

SANS 1595:2003

2

Forged steel lifting hooks for use with steel chains of strength grade M(4), P(5), S(6), T(8) and V(10)

(SABS 1575)

(SABS 1578)

(SABS 1580)

(SABS 1582-1)

(SABS 1584-1)

(SABS 1585)

(SABS 1587)

(SABS 1589)

(SABS 1593)

(SABS 1595)

Page 71

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1596:2007 (SABS 1596)

1.01

Drop forged eyebolts and eyenuts for lifting purposes

SANS 1597:1994

1

Antiseptics based on chlorhexidine gluconate

SANS 1598:2006 (SABS 1598)

2

Unleaded petrol

SANS 1599-1:2006

1.04

Cranes Part 1: Cantilever/Slewing jib cranes

SANS 1599-2:2003 (SABS 1599-2)

1.01

Cranes Part 2: Power-driven mobile cranes

SANS 1600:2007

2

Permitted electric detonators

SANS 1601:2007 (SABS 1601)

2

Structured wall pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for buried drainage and sewerage systems

SANS 1602:2007

1.01

Electrodeposited coatings of copper and copper alloys

SANS 1609-1:2005 (SABS 1609-1)

1.01

Radio transmissions in the VHF band Part 1: Transmission standards for FM sound broadcasting

SANS 1611:2005

1.01

The mechanical requirements for satellite television receiving antennas

SANS 1612:2007 (SABS 1612)

1.02

Paper punches (desk top types)

SANS 1613:2007

2

Warp-knitted terry towelling fabric and articles

SANS 1615:1995 (SABS 1615)

1.01

Disinfectants based on glutaraldehyde for general use

SANS 1616:1995

1

Detergent-disinfectants based on glutaraldehyde

SANS 1617:1994 (SABS 1617)

1

Chains, chain wheels and slats for slat conveyors

SANS 1618:2008

1.01

Timber preservative - Insecticidal deltamethrin for interior use

SANS 1619:2009 (SABS 1619)

2.02

Small power distribution units (ready-boards) for single-phase 230 V service connections

SANS 1620:1995

1

Barbed tape security barriers

SANS 1622:2009 (SABS 1622)

1.01

New replacement brake drums for motor vehicles

SANS 1623:1995/BS 4116-4:1992, NEQ

1

Conveyor chains and their attachments (British series)

1

Bush conveyor chains

(SABS 1597)

(SABS 1599-1)

(SABS 1600)

(SABS 1602)

(SABS 1611)

(SABS 1613)

(SABS 1616)

(SABS 1618)

(SABS 1620)

(SABS 1623) SANS 1624:1995 (SABS 1624)

Page 72

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1625:2006 (SABS 1625)

1.02

Amplitude-modulated (AM) broadcast transmissions in the LF, MF and HF bands

SANS 1626:2007

1.01

Electrodeposited coatings of silver and silver alloys for decorative and protective purposes

SANS 1627:2007 (SABS 1627)

1.01

Electrodeposited coatings of gold and gold alloys for decorative and protective purposes

SANS 1628-2:1998/ISO 1628-2:1998, IDT, Ed. 2

1

Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 2: Poly(vinyl chloride) resins

SANS 1632-1:2005 (SABS 1632-1)

1.01

Batteries Part 1: General information - Definitions, abbreviations and symbols

SANS 1632-2:2005

1.01

Batteries Part 2: Vented-type stationary lead-acid cells and batteries

SANS 1632-3:2005 (SABS 1632-3)

1.01

Batteries Part 3: Vented-type prismatic nickelcadmium cells and batteries

SANS 1636:2007

2.01

Manually operated chain lever hoists

SANS 1637:2008 (SABS 1637)

1.02

Reconditioned manually operated chain lever hoists

SANS 1638:2008

2

Pneumatically powered chain hoists

SANS 1639:2010 (SABS 1639)

2

Reconditioned pneumatically powered chain hoists

SANS 1640:2008

1.02

Reconditioned manually operated chain hoists

SANS 1642:2007 (SABS 1642)

1.02

Baker's compressed yeast

SANS 1643:2007

1.02

Dried yeast for use in wet sorghum beer brewing

SANS 1644:2007 (SABS 1644)

1.02

Lenses for sunglasses and fashion spectacles Safety requirements

SANS 1645:2009

1.01

Portable insulated domestic food containers

SANS 1649:1995 (SABS 1649)

1

Non-automatic self-indicating and semi-selfindicating weighing instruments

SANS 1650:1995

1

Liquid fuel dispensers

SANS 1652:2008 (SABS 1652)

1.05

Battery chargers - Industrial type

SANS 1653:2008

1.03

Automotive carpeting

2

DC-powered (battery-operated) machines for use in hazardous locations in mines

(SABS 1626)

(SABS ISO 1628-2)

(SABS 1632-2)

(SABS 1636)

(SABS 1638)

(SABS 1640)

(SABS 1643)

(SABS 1645)

(SABS 1650)

(SABS 1653) SANS 1654:2009 (SABS 1654)

Page 73

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1655:2004 (SABS 1655)

1.01

Welding of thermoplastics - Welding rods, fillers and solvents

SANS 1657:2009

2.01

Bottled water of subterranean origin

SANS 1658:2007 (SABS 1658)

2

Ballistic resistance of body armour

SANS 1659:2007

1.01

Aluminium master alloys for remelting

SANS 1660:2005 (SABS 1660)

2

Correction fluids

SANS 1661:2008

2

Cord extension sets

SANS 1668:2007 (SABS 1668)

1.01

Fibre-reinforced plastics (FRP) tanks for buried (underground) storage for petroleum products

SANS 1669-1:2005

1

Conveyor belt pulleys Part 1: Pulley types, construction and dimensions

SANS 1669-2:2008

1.01

Conveyor belt pulleys Part 2: Lagging

SANS 1670:2008

1.01

Warning lights

SANS 1671-1:2007 (SABS 1671-1)

1.01

Welding of thermoplastics - Machines and equipment Part 1: Heated-tool welding

SANS 1671-2:2004

1.01

Welding of thermoplastics: Machines and equipment Part 2: Electrofusion welding

SANS 1671-3:2004 (SABS 1671-3)

1.01

Welding of thermoplastics - Machines and equipment Part 3: Hot-gas welding

SANS 1671-4:2004

1.01

Welding of thermoplastics - Machines and equipment Part 4: Hot-gas extrusion welding

SANS 1671-6:2003

1

Welding of thermoplastics - Machines and equipment Part 6: Ultrasonic welding, staking and insertion

SANS 1673:2001

1

Disinfectants based on organic halogen compounds (other than iodine compounds), such as fluorine, bromine or chlorine

SANS 1674:2007 (SABS 1674)

1.01

Disinfectants based on iodophors

SANS 1675:2001

1.02

The manufacture, production, processing and treatment of canned meat products

SANS 1678:2010 (SABS 1678)

2

Sterilized milk

SANS 1679:2010

2

Pasteurized milk

(SABS 1657)

(SABS 1659)

(SABS 1661)

(SABS 1670)

(SABS 1671-2)

(SABS 1671-4)

(SABS 1673)

(SABS 1675)

(SABS 1679)

Page 74

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1697:2007 (SABS 1697)

1.02

Verification standards for the verification of massmeasuring instruments, including commercial standard masspieces

SANS 1698:2007

1.02

Verification standards for the verification of volumemeasuring instruments, including commercial standards of volume

SANS 1700-1-1:1996/ISO 1891:1979, IDT, Ed. 1 (SABS 1700-1-1)

1

Fasteners Part 1: Terminology and nomenclature Section 1: Bolts, screws, nuts and accessories

SANS 1700-1-2:1996/ISO 5408:1983, IDT, Ed. 1

1

Fasteners Part 1: Terminology and nomenclature Section 2: Cylindrical screw threads

SANS 1700-2-1:2003/ISO 68-1:1998, IDT, Ed. 1

1

Fasteners Part 2: Screw threads Section 1: ISO general purpose screw threads - Basic profile Metric screw threads

SANS 1700-2-2:2003/ISO 261:1998, IDT, Ed. 2

1

Fasteners Part 2: Screw threads Section 2: ISO general purpose metric screw threads - General plan

SANS 1700-2-3:2003/ISO 262:1998, IDT, Ed. 2

1

Fasteners Part 2: Screw threads Section 3: ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts

SANS 1700-2-4:1996/ISO 724:1993, IDT, Ed. 2

1

Fasteners Part 2: Screw threads Section 4: ISO general-purpose metric screw threads - Basic dimensions

SANS 1700-2-5:2003/ISO 965-1:1998, IDT, Ed. 3 (SABS 1700-2-5)

2

Fasteners Part 2: Screw threads Section 5: ISO general purpose metric screw threads - Tolerances Principles and basic data

SANS 1700-2-6:2003/ISO 965-2:1998, IDT, Ed. 3

2

Fasteners Part 2: Screw threads Section 6: ISO general purpose metric screw threads - Tolerances Limits of sizes for general purpose external and internal screw threads - Medium quality

2

Fasteners Part 2: Screw threads Section 7: ISO general purpose metric screw threads - Tolerances Deviations for constructional screw threads

SANS 1700-2-8:2009/ISO 1501:2009, IDT, Ed. 1 (SABS 1700-2-8)

2

Fasteners Part 2: Screw threads Section 8: ISO miniature screw threads

SANS 1700-2-9:1996/ISO 1502:1996, IDT, Ed. 2

1

Fasteners Part 2: Screw threads Section 9: ISO general-purpose metric screw threads - Gauges and gauging

SANS 1700-2-10:1996/ISO 263:1973, IDT, Ed. 1 (SABS 1700-2-10)

1

Fasteners Part 2: Screw threads Section 10: ISO inch screw threads - General plan and selection for screws, bolts and nuts - Diameter range 0,06 to 6 in

SANS 1700-2-12:1996/ISO 5864:1993, IDT, Ed. 2

1

Fasteners Part 2: Screw threads Section 12: ISO inch screw threads - Allowances and tolerances

SANS 1700-2-13:2003/ISO 1478:1999, IDT, Ed. 2 (SABS 1700-2-13)

2

Fasteners Part 2: Screw threads Section 13: Tapping screws thread

SANS 1700-2-14:1996/ISO 2901:1993, IDT, Ed. 2

1

Fasteners Part 2: Screw threads Section 14: ISO metric trapezoidal screw threads - Basic profile and maximum material profiles

SANS 1700-2-15:1996/ISO 2902:1977, IDT, Ed. 1 (SABS 1700-2-15)

1

Fasteners Part 2: Screw threads Section 15: ISO metric trapezoidal screw threads - General plan

SANS 1700-2-16:1996/ISO 2903:1993, IDT, Ed. 2

1

Fasteners Part 2: Screw threads Section 16: ISO metric trapezoidal screw threads - Tolerances

(SABS 1698)

(SABS 1700-1-2)

(SABS 1700-2-4)

(SABS 1700-2-6)

SANS 1700-2-7:2003/ISO 965-3:1998, IDT, Ed. 3 (SABS 1700-2-7)

(SABS 1700-2-9)

(SABS 1700-2-12)

(SABS 1700-2-14)

(SABS 1700-2-16)

Page 75

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1700-2-17:1996/ISO 2904:1977, IDT, Ed. 1 (SABS 1700-2-17)

1

Fasteners Part 2: Screw threads Section 17: ISO metric trapezoidal screw threads - Basic dimensions

SANS 1700-2-18:2003/ISO 68-2:1998, IDT, Ed. 1

1

Fasteners Part 2: Screw threads Section 18: ISO general purpose screw threads - Basic profile - Inch screw threads

SANS 1700-2-19:2003/ISO 965-4:1998, IDT, Ed. 1

1

Fasteners Part 2: Screw threads Section 19: ISO general purpose metric screw threads - Tolerances Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

SANS 1700-2-20:2003/ISO 965-5:1998, IDT, Ed. 1

1

Fasteners Part 2: Screw threads Section 20: ISO general purpose metric screw threads - Tolerances Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

SANS 1700-2-21:2004/ISO 5855-1:1999, IDT, Ed. 3

1

Fasteners Part 2: Screw threads Section 21: Aerospace - MJ threads - General requirements

SANS 1700-2-22:2004/ISO 5855-2:1999, IDT, Ed. 3

1

Fasteners Part 2: Screw threads Section 22: Aerospace - MJ threads - Limit dimensions for bolts and nuts

SANS 1700-3-1:1996/ISO 225:1983, IDT, Ed. 2

1

Fasteners Part 3: Forms, dimensions and designations Section 1: Bolts, screws, studs and nuts - Symbols and designations of dimensions

SANS 1700-3-2:1996/ISO 272:1982, IDT, Ed. 2 (SABS 1700-3-2)

1

Fasteners Part 3: Forms, dimensions and designations Section 2: Hexagon products - Widths across flats

SANS 1700-3-3:1996/ISO 273:1979, IDT, Ed. 1

1

Fasteners Part 3: Forms, dimensions and designations Section 3: Clearance holes for bolts and screws

SANS 1700-3-4:2003/ISO 885:2000, IDT, Ed. 2 (SABS 1700-3-4)

2

Fasteners Part 3: Forms, dimensions and designations Section 4: General purpose bolts and screws - Metric series - Radii under the head

SANS 1700-3-5:1996/ISO 888:1976, IDT, Ed. 1

1

Fasteners Part 3: Forms, dimensions and designations Section 5: Bolts, screws and studs Nominal lengths, and thread lengths for general purpose bolts

1

Fasteners Part 3: Forms, dimensions and designations Section 6: Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262

2

Fasteners Part 3: Forms, dimensions and designations Section 7: Fasteners - Ends of parts with external ISO metric thread

SANS 1700-3-8:1996/ISO 4755:1983, IDT, Ed. 1 (SABS 1700-3-8)

1

Fasteners Part 3: Forms, dimensions and designations Section 8: Thread undercuts for external metric ISO threads

SANS 1700-3-9:1996/ISO 4757:1983, IDT, Ed. 1

1

Fasteners Part 3: Forms, dimensions and designations Section 9: Cross recesses for screws

SANS 1700-3-10:1996/ISO 7378:1983, IDT, Ed. 1 (SABS 1700-3-10)

1

Fasteners Part 3: Forms, dimensions and designations Section 10: Bolts, screws and studs Split pin holes and wire holes

SANS 1700-3-11:1996/ISO 7721:1983, IDT, Ed. 1

1

Fasteners Part 3: Forms, dimensions and designations Section 11: Countersunk head screws - Head configuration and gauging

(SABS 1700-3-1)

(SABS 1700-3-3)

(SABS 1700-3-5)

SANS 1700-3-6:1996/ISO 3508:1976, IDT, Ed. 1 (SABS 1700-3-6)

SANS 1700-3-7:2003/ISO 4753:1999, IDT, Ed. 2 (SABS 1700-3-7)

(SABS 1700-3-9)

(SABS 1700-3-11)

Page 76

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1700-3-12:1996/ISO 7721-2:1990, IDT, Ed. 1 (SABS 1700-3-12)

1

Fasteners Part 3: Forms, dimensions and designations Section 12: Countersunk flat head screws - Penetration depth of cross recesses

SANS 1700-3-13:1996/ISO 8991:1986, IDT, Ed. 1

1

Fasteners Part 3: Forms, dimensions and designations Section 13: Designation system for fasteners

SANS 1700-4-1:2003/ISO 4759-1:2000, IDT, Ed. 2 (SABS 1700-4-1)

2

Fasteners Part 4: Tolerances Section 1: Tolerances for fasteners - Bolts, screws, studs and nuts Product grades A, B and C

SANS 1700-4-3:2003/ISO 4759-3:2000, IDT, Ed. 3

2

Fasteners Part 4: Tolerances Section 3: Tolerances for fasteners - Plain washers for bolts, screws and nuts - Product grades A and C

SANS 1700-5-1:2003/ISO 898-1:1999, IDT, Ed. 3 (SABS 1700-5-1)

2

Fasteners Part 5: General requirements and mechanical properties Section 1: Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs

SANS 1700-5-2:1996/ISO 898-2:1992, IDT, Ed. 2 (SABS 1700-5-2)

1

Fasteners Part 5: General requirements and mechanical properties Section 2: Nuts with specified proof load values - Coarse thread

SANS 1700-5-3:2003/ISO 898-5:1998, IDT, Ed. 2

2

Fasteners Part 5: General requirements and mechanical properties Section 3: Mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners not under tensile stresses

1

Fasteners Part 5: General requirements and mechanical properties Section 4: Nuts with specified proof load values - Fine pitch thread

SANS 1700-5-5:2003/ISO 2320:1997, IDT, Ed. 3 (SABS 1700-5-5)

1.01

Fasteners Part 5: General requirements and mechanical properties Section 5: Prevailing torque type steel hexagon nuts - Mechanical and performance properties

SANS 1700-5-6:1996/ISO 2702:1992, IDT, Ed. 2 (SABS 1700-5-6)

1

Fasteners Part 5: General requirements and mechanical properties Section 6: Heat-treated steel tapping screws

SANS 1700-5-8:2003/ISO 3506-1:1997, IDT, Ed. 1

1.01

Fasteners Part 5: General requirements and mechanical properties Section 8: Mechanical properties of corrosion-resistant stainless-steel fasteners - Bolts, screws and studs

SANS 1700-5-9:2003/ISO 3506-2:1997, IDT, Ed. 1 (SABS 1700-5-9)

1.01

Fasteners Part 5: General requirements and mechanical properties Section 9: Mechanical properties of corrosion-resistant stainless-steel fasteners - Nuts

SANS 1700-5-10:2003/ISO 3506-3:1997, IDT, Ed. 1 (SABS 1700-5-10)

1.01

Fasteners Part 5: General requirements and mechanical properties Section 10: Mechanical properties of corrosion-resistant stainless-steel fasteners - Set screws and similar fasteners not under tensile stress

SANS 1700-5-11:2003/ISO 4042:1999, IDT, Ed. 2

2

Fasteners Part 5: General requirements and mechanical properties Section 11: Electroplated coatings

SANS 1700-5-12:1996/ISO 6157-1:1988, IDT, Ed. 1 (SABS 1700-5-12)

1

Fasteners Part 5: General requirements and mechanical properties Section 12: Surface discontinuities - Bolts, screws and studs for general requirements

SANS 1700-5-13:1996/ISO 6157-3:1988, IDT, Ed. 1

1

Fasteners Part 5: General requirements and mechanical properties Section 13: Surface discontinuities - Bolts, screws and studs for special requirements

(SABS 1700-3-13)

(SABS 1700-4-3)

(SABS 1700-5-3)

SANS 1700-5-4:1996/ISO 898-6:1994, IDT, Ed. 2 (SABS 1700-5-4)

(SABS 1700-5-8)

(SABS 1700-5-11)

(SABS 1700-5-13)

Page 77

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1700-5-14:1996/ISO 8839:1986, IDT, Ed. 1 (SABS 1700-5-14)

1

Fasteners Part 5: General requirements and mechanical properties Section 14: Bolts, screws, studs and nuts made of non-ferrous metals

SANS 1700-5-15:2008/ISO 8992:2005, IDT, Ed. 2

2

Fasteners Part 5: General requirements and mechanical properties Section 15: Bolts, screws, studs and nuts

SANS 1700-5-16:2003/ISO 10666:1999, IDT, Ed. 1

1

Fasteners: Part 5: General requirements and mechanhical properties Section 16: Drilling screws with tapping screw thread - Mechanical and functional properties

SANS 1700-5-17:2003/ISO 7085:1999, IDT, Ed. 1

1

Fasteners Part 5: General requirements and mechanical properties Section 17: Mechanical and performance requirements of case hardened and tempered metric thread rolling screws

SANS 1700-5-18:2003/ISO 10683:2000, IDT, Ed. 1

1

Fasteners Part 5: General requirements and mechanical properties Section 18: Fasteners - Nonelectrolytically applied zinc flake coatings

SANS 1700-6-2:2003/ISO 3269:2000, IDT, Ed. 3 (SABS 1700-6-2)

2

Fasteners Part 6: Testing and acceptance inspection Section 2: Fasteners - Acceptance inspection

SANS 1700-6-3:1996/ISO 3800:1993, IDT, Ed. 1

1

Fasteners Part 6: Testing and acceptance inspection Section 3: Threaded fasteners - Axial load fatigue testing - Test methods and evaluation of results

1

Fasteners Part 6: Testing and acceptance inspection Section 4: Pins and grooved pins - Shear test

SANS 1700-6-5:1998/ISO 10484:1997, IDT, Ed. 1 (SABS 1700-6-5)

1

Fasteners Part 6: Testing and acceptance inspection Section 5: Widening test on nuts

SANS 1700-6-6:2003/ISO 15330:1999, IDT, Ed. 1

1

Fasteners Part 6: Testing and acceptance inspection Section 6: Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method

SANS 1700-7-1:2003/ISO 4014:1999, IDT, Ed. 3

2

Fasteners Part 7: External drive hexagon bolts and screws Section 1: Hexagon head bolts - Product grades A and B

SANS 1700-7-2:1996/ISO 4015:1979, IDT, Ed. 1 (SABS 1700-7-2)

1

Fasteners Part 7: External drive hexagon bolts and screws Section 2: Hexagon head bolts - Product grade B - Reduced shank (shank diameter approximately equal to pitch diameter)

SANS 1700-7-3:2003/ISO 4016:1999, IDT, Ed. 3

2

Fasteners Part 7: External drive hexagon bolts and screws Section 3: Hexagon head bolts - Product grade C

SANS 1700-7-4:2003/ISO 4017:1999, IDT, Ed. 3 (SABS 1700-7-4)

2

Fasteners Part 7: External drive hexagon bolts and screws Section 4: Hexagon head screws - Product grades A and B

SANS 1700-7-5:2003/ISO 4018:1999, IDT, Ed. 3

2

Fasteners Part 7: External drive hexagon bolts and screws Section 5: Hexagon head screws - Product grade C

SANS 1700-7-6:2003/ISO 4162:1990, IDT, Ed. 1

1

Fasteners Part 7: External drive hexagon bolts and screws Section 6: Hexagon flange bolts - Small series

SANS 1700-7-7:2003/ISO 7411:1984, IDT, Ed. 1

1

Fasteners Part 7: External drive hexagon bolts and screws Section 7: Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to SABS ISO 888) - Product grade C - Property classes 8.8 and 10.9

(SABS 1700-5-15)

(SABS 1700-6-3)

SANS 1700-6-4:1996/ISO 8749:1986, IDT, Ed. 1 (SABS 1700-6-4)

(SABS 1700-7-1)

(SABS 1700-7-3)

(SABS 1700-7-5)

Page 78

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1700-7-8:2003/ISO 7412:1984, IDT, Ed. 1

1

Fasteners Part 7: External drive hexagon bolts and screws Section 8: Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) - Product grade C - Property classes 8.8 and 10.9

SANS 1700-7-9:2003/ISO 8676:1999, IDT, Ed. 2 (SABS 1700-7-9)

2

Fasteners Part 7: External drive hexagon bolts and screws Section 9: Hexagon head screws with metric fine pitch thread - Product grades A and B

SANS 1700-7-10:2003/ISO 8765:1999, IDT, Ed. 2

2

Fasteners Part 7: External drive hexagon bolts and screws Section 10 : Hexagon head bolts with metric fine pitch thread - Product grades A and B

SANS 1700-7-11:2003/ISO 15071:1999, IDT, Ed. 1

1

Fasteners Part 7: External drive hexagon bolts and screws Section 11: Hexagon bolts with flange Small series - Product grade A

SANS 1700-7-12:2003/ISO 15072:1999, IDT, Ed. 1

1

Fasteners Part 7: External drive hexagon bolts and screws Section 12: Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A

SANS 1700-8-2:1996/ISO 8678:1988, IDT, Ed. 1

1

Fasteners Part 8: Square neck bolts Section 2: Cup head square neck bolts with small head and short neck - Product grade B

SANS 1700-9-1:2008/ISO 4762:2004, IDT, Ed. 4 (SABS 1700-9-1)

2

Fasteners Part 9: Hexagon socket head screws Section 1: Hexagon socket head cap screws

SANS 1700-9-2:1996/ISO 7379:1983, IDT, Ed. 1

1

Fasteners Part 9: Hexagon socket head screws Section 2: Hexagon socket head shoulder screws

SANS 1700-9-3:2008/ISO 7380:2004, IDT, Ed. 3 (SABS 1700-9-3)

2

Fasteners Part 9: Hexagon socket head screws Section 3: Hexagon socket button head screws

SANS 1700-9-4:2008/ISO 10642:2004, IDT, Ed. 2

2

Fasteners Part 9: Hexagon socket head screws Section 4: Hexagon socket countersunk head screws

SANS 1700-9-5:2008/ISO 10664:2005, IDT, Ed. 2

2

Fasteners Part 9: Hexagon socket head screws Section 5: Hexalobular internal driving feature for bolts and screws

SANS 1700-10-1:1996/ISO 1207:1992, IDT, Ed. 3

1

Fasteners Part 10: Slotted head screws Section 1: Slotted cheese head screws - Product grade A

SANS 1700-10-2:1996/ISO 1580:1994, IDT, Ed. 2 (SABS 1700-10-2)

1

Fasteners Part 10: Slotted head screws Section 2: Slotted pan head screws - Product grade A

SANS 1700-10-3:1996/ISO 2009:1994, IDT, Ed. 3

1

Fasteners Part 10: Slotted head screws - Section 3: Slotted countersunk flat head screws (common head style) - Product grade A

SANS 1700-10-4:1996/ISO 2010:1994, IDT, Ed. 3 (SABS 1700-10-4)

1

Fasteners Part 10: Slotted head screws Section 4: Countersunk slotted raised head screws (common head style) - Product grade A

SANS 1700-11-1:1996/ISO 7045:1994, IDT, Ed. 2

1

Fasteners Part 11: Cross recessed countersunk flat head screws (common head style) - Grade A Section 1: Pan head screws with type H or type Z cross recess - Product grade A

1

Fasteners Part 11: Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A Section 2: Steel of property class 4.8

(SABS 1700-7-10)

(SABS 1700-8-2)

(SABS 1700-9-2)

(SABS 1700-9-4)

(SABS 1700-10-1)

(SABS 1700-10-3)

(SABS 1700-11-1)

SANS 1700-11-2:1996/ISO 7046-1:1994, IDT, Ed. 1 (SABS 1700-11-2)

Page 79

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1700-11-3:1996/ISO 7046-2:1990, IDT, Ed. 1 (SABS 1700-11-3)

1

Fasteners Part 11: Cross recessed countersunk flat head screws (common head style) - Grade A Section 3: Steel of property class 8.8, stainless steel and non-ferrous metals

SANS 1700-11-4:1996/ISO 7047:1994, IDT, Ed. 2 (SABS 1700-11-4)

1

Fasteners Part 11: Cross recessed head screws Section 4: Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A

SANS 1700-11-5:2003/ISO 7048:1998, IDT, Ed. 1

1

Fasteners Part 11: Cross recessed head screws Section 5: Cross recessed cheese head screws

SANS 1700-12-1:2004/ISO 2342:2003, IDT, Ed. 2 (SABS 1700-12-1)

2

Fasteners Part 12: Set screws Section 1: Slotted headless screws with shank

SANS 1700-12-2:2004/ISO 4026:2003, IDT, Ed. 3

2

Fasteners Part 12: Set screws Section 2: Hexagon socket set screws with flat point

SANS 1700-12-3:2009/ISO 4027:2003, IDT, Ed. 3 (SABS 1700-12-3)

2

Fasteners Part 12: Set screws Section 3: Hexagon socket set screws with cone point

SANS 1700-12-4:2004/ISO 4028:2003, IDT, Ed. 3

2

Fasteners Part 12: Set screws Section 4: Hexagon socket set screws with dog point

SANS 1700-12-5:2004/ISO 4029:2003, IDT, Ed. 3 (SABS 1700-12-5)

2

Fasteners Part 12: Set screws Section 5: Hexagon socket set screws with cup point

SANS 1700-12-6:1996/ISO 4766:1983, IDT, Ed. 1

1

Fasteners Part 12: Set screws Section 6: Slotted set screws with flat point

SANS 1700-12-7:1996/ISO 7434:1983, IDT, Ed. 1 (SABS 1700-12-7)

1

Fasteners Part 12: Set screws Section 7: Slotted set screws with cone point

SANS 1700-12-8:1996/ISO 7435:1983, IDT, Ed. 1

1

Fasteners Part 12: Set screws Section 8: Slotted set screws with long dog point

SANS 1700-12-9:1996/ISO 7436:1983, IDT, Ed. 1 (SABS 1700-12-9)

1

Fasteners Part 12: Set screws Section 9: Slotted set screws with cup point

SANS 1700-13-1:1996/ISO 1479:1983, IDT, Ed. 1

1

Fasteners Part 13: Tapping screws Section 1: Hexagon head tapping screws

SANS 1700-13-2:1996/ISO 1481:1983, IDT, Ed. 1 (SABS 1700-13-2)

1

Fasteners Part 13: Tapping screws Section 2: Slotted pan head tapping screws

SANS 1700-13-3:1996/ISO 1482:1983, IDT, Ed. 1

1

Fasteners Part 13: Tapping screws Section 3: Slotted countersunk (flat) head tapping screws (common head style)

SANS 1700-13-4:1996/ISO 1483:1983, IDT, Ed. 1 (SABS 1700-13-4)

1

Fasteners Part 13: Tapping screws Section 4: Slotted raised countersunk (oval) head tapping screws (common head style)

SANS 1700-13-5:1996/ISO 7049:1983, IDT, Ed. 1

1

Fasteners Part 13: Tapping screws Section 5: Cross recessed pan head tapping screws

SANS 1700-13-6:1996/ISO 7050:1983, IDT, Ed. 1 (SABS 1700-13-6)

1

Fasteners Part 13: Tapping screws Section 6: Cross recessed countersunk (flat) head tapping screws (common head style)

SANS 1700-13-7:1996/ISO 7051:1983, IDT, Ed. 1

1

Fasteners Part 13: Tapping screws Section 7: Cross recessed raised countersunk (oval) head tapping screws

(SABS 1700-12-2)

(SABS 1700-12-4)

(SABS 1700-12-6)

(SABS 1700-12-8)

(SABS 1700-13-1)

(SABS 1700-13-3)

(SABS 1700-13-5)

(SABS 1700-13-7)

Page 80

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1700-13-8:2003/ISO 10510:1999, IDT, Ed. 1

1

Fasteners Part 13: Tapping screws Section 8: Tapping screw and washer assemblies with plain washers

SANS 1700-13-9:2003/ISO 15480:1999, IDT, Ed. 1

1

Fasteners Part 13: Tapping screws Section 9: Hexagon washer head drilling screws with tapping screw thread

SANS 1700-13-10:2003/ISO 15481:1999, IDT, Ed. 1

1

Fasteners Part 13: Tapping screws Section 10: Cross recessed pan head drilling screws with tapping screw thread

SANS 1700-13-11:2003/ISO 15482:1999, IDT, Ed. 1

1

Fasteners Part 13: Tapping screws Section 11: Cross recessed countersunk head drilling screws with tapping screw thread

SANS 1700-13-12:2003/ISO 15483:1999, IDT, Ed. 1

1

Fasteners Part 13: Tapping screws Section 12: Cross recessed raised countersunk head drilling screws with tapping screw thread

SANS 1700-14-1:2003/ISO 4032:1999, IDT, Ed. 3

2

Fasteners Part 14: Hexagon nuts Section 1: Hexagon nuts, style 1 - Product grades A and B

SANS 1700-14-2:2003/ISO 4033:1999, IDT, Ed. 2 (SABS 1700-14-2)

2

Fasteners Part 14: Hexagon nuts Section 2: Hexagon nuts, style 2 - Product grades A and B

SANS 1700-14-3:2003/ISO 4034:1999, IDT, Ed. 3

2

Fasteners Part 14: Hexagon nuts Section 3: Hexagon nuts - Product grade C

SANS 1700-14-4:2003/ISO 4035:1999, IDT, Ed. 3 (SABS 1700-14-4)

2

Fasteners Part 14: Hexagon nuts Section 4: Hexagon thin nuts (chamfered) - Product grades A and B

SANS 1700-14-5:2003/ISO 4036:1999, IDT, Ed. 2

2

Fasteners Part 14: Hexagon nuts Section 5: Hexagon thin nuts (unchamfered) - Product grade B

SANS 1700-14-6:2003/ISO 4161:1999, IDT, Ed. 2

1

Fasteners Part 14: Hexagon nuts Section 6: Hexagon nuts with flange - Coarse thread

SANS 1700-14-8:2003/ISO 4775:1984, IDT, Ed. 1

1

Fasteners Part 14: Hexagon nuts Section 8: Hexagon nuts for high-strength structural bolting with large width across flats - Product grade B Property classes 8 and 10

SANS 1700-14-9:1996/ISO 7413:1984, IDT, Ed. 1

1

Fasteners Part 14: Hexagon nuts Section 9: Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) - Product grades A and B - Property classes 5, 6 and 8

SANS 1700-14-10:2003/ISO 7414:1984, IDT, Ed. 1

1

Fasteners Part 14: Hexagon nuts Section 10: Hexagon nuts for structural bolting with large width across flats, style 1 - Product grade B - Property class 10

SANS 1700-14-11:2003/ISO 7417:1984, IDT, Ed. 1

1

Fasteners Part 14: Hexagon nuts Section 11: Hexagon nuts for structural bolting, Style 2, hot-dip galvanized (oversize tapped) - Product grade A Property class 9

SANS 1700-14-12:2003/ISO 8673:1999, IDT, Ed. 2 (SABS 1700-14-12)

2

Fasteners Part 14: Hexagon nuts Section 12: Hexagon nuts, style 1, with metric fine pitch thread Product grades A and B

SANS 1700-14-13:2003/ISO 8674:1999, IDT, Ed. 2

2

Fasteners Part 14: Hexagon nuts Section 13: Hexagon nuts, style 2, with metric fine pitch thread Product grades A and B

2

Fasteners Part 14: Hexagon nuts Section 14: Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B

(SABS 1700-14-1)

(SABS 1700-14-3)

(SABS 1700-14-5)

(SABS 1700-14-9)

(SABS 1700-14-13) SANS 1700-14-14:2003/ISO 8675:1999, IDT, Ed. 2 (SABS 1700-14-14)

Page 81

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1700-14-15:2003/ISO 10663:1999, IDT, Ed. 1

1

Fasteners Part 14: Hexagon nuts Section 15: Hexagon nuts with flange - Fine pitch thread

SANS 1700-15-1:1998/ISO 7040:1997, IDT, Ed. 2

1

Fasteners Part 15: Prevailing torque type nuts Section 1: Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10

2

Fasteners Part 15: Prevailing torque type nuts Section 2: Prevailing torque type hexagon nuts (with non-metallic insert), style 2 - Property classes 9 and 12

SANS 1700-15-3:1998/ISO 7042:1997, IDT, Ed. 2 (SABS 1700-15-3)

1

Fasteners Part 15: Prevailing torque type nuts Section 3: Prevailing torque type all-metal hexagon nuts, style 2 - Property classes 5, 8, 10 and 12

SANS 1700-15-4:1998/ISO 7043:1997, IDT, Ed. 2

1

Fasteners Part 15: Prevailing torque type nuts Section 4: Prevailing torque type hexagon nuts with flange (with non-metallic insert) - Product grades A and B

1

Fasteners Part 15: Prevailing torque type nuts Section 5: Prevailing torque type all-metal hexagon nuts with flange - Product grades A and B

SANS 1700-15-6:1998/ISO 7719:1997, IDT, Ed. 2 (SABS 1700-15-6)

1

Fasteners Part 15: Prevailing torque type nuts Section 6: Prevailing torque type all-metal hexagon nuts, style 1 - Property classes 5, 8 and 10

SANS 1700-15-7:1998/ISO 7720:1997, IDT, Ed. 2

1

Fasteners Part 15: Prevailing torque type nuts Section 7: Prevailing torque type all-metal hexagon nuts, style 2 - Property class 9

SANS 1700-15-8:1998/ISO 10511:1997, IDT, Ed. 1 (SABS 1700-15-8)

1

Fasteners Part 15: Prevailing torque type nuts Section 8: Prevailing torque type hexagon thin nuts (with non-metallic insert)

SANS 1700-15-9:1998/ISO 10512:1997, IDT, Ed. 1

1

Fasteners Part 15: Prevailing torque type nuts Section 9: Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10

1

Fasteners Part 15: Prevailing torque type nuts Section 10: Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread - Property classes 8, 10 and 12

SANS 1700-15-11:1998/ISO 12125:1997, IDT, Ed. 1 (SABS 1700-15-11)

1

Fasteners Part 15: Prevailing torque type nuts Section 11: Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread - Product grades A and B

SANS 1700-15-12:1998/ISO 12126:1997, IDT, Ed. 1 (SABS 1700-15-12)

1

Fasteners Part 15: Prevailing torque type nuts Section 12: Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread Product grades A and B

SANS 1700-16-1:2003/ISO 887:2000, IDT, Ed. 2

1

Fasteners Part 16: Washers Section 1: Plain washers for metric bolts, screws and nuts for general purposes - General plan

SANS 1700-16-2:2003/ISO 7089:2000, IDT, Ed. 2

1

Fasteners Part 16: Washers Section 2: Plain washers - Normal series - Product grade A

SANS 1700-16-3:2003/ISO 7090:2000, IDT, Ed. 2

1

Fasteners Part 16: Washers Section 3: Plain washers, chamfered - Normal series - Product grade A

SANS 1700-16-4:2003/ISO 7091:2000, IDT, Ed. 2

1

Fasteners Part 16: Washers Section 4: Plain washers - Normal series - Product grade C

(SABS 1700-15-1)

SANS 1700-15-2:2007/ISO 7041:2002, IDT, Ed. 3 (SABS 1700-15-2)

(SABS 1700-15-4)

SANS 1700-15-5:1998/ISO 7044:1997, IDT, Ed. 2 (SABS 1700-15-5)

(SABS 1700-15-7)

(SABS 1700-15-9)

SANS 1700-15-10:1998/ISO 10513:1997, IDT, Ed. 1 (SABS 1700-15-10)

Page 82

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1700-16-5:2003/ISO 7092:2000, IDT, Ed. 2

1

Fasteners Part 16: Washers Section 5: Plain washers - Small series - Product grade A

SANS 1700-16-6:2003/ISO 7093-1:2000, IDT, Ed. 1

2

Fasteners Part 16: Washers Section 6: Plain washers - Large series - Product grade A

SANS 1700-16-7:2003/ISO 7094:2000, IDT, Ed. 2 (SABS 1700-16-7)

2

Fasteners Part 16: Washers Section 7: Plain washers - Extra large series - Product grade C

SANS 1700-16-8:2004/ISO 7415:1984, IDT, Ed. 1

1

Fasteners Part 16: Washers Section 8: Plain washers for high-strength structural bolting, hardened and tempered

SANS 1700-16-9:2004/ISO 7416:1984, IDT, Ed. 1

1

Fasteners Part 16: Washers Section 9: Plain washers, chamfered, hardened, and tempered for high-strength structural bolting

SANS 1700-16-10:1996/ISO 8738:1986, IDT, Ed. 1

1

Fasteners Part 16: Washers Section 10: Plain washers for clevis pins - Product grade A

SANS 1700-16-14:2003/ISO 7093-2:2000, IDT, Ed. 1 1

Fasteners Part 16: Washers Section 14: Plain washers - Large series - Product grade C

SANS 1700-16-15:2003/ISO 10644:1998, IDT, Ed. 1

1

Fasteners Part 16: Washers Section 15: Screw and washer assemblies with plain washers - Washer hardness classes 200 HV and 300 HV

SANS 1700-16-16:2003/ISO 10669:1999, IDT, Ed. 1

1

Fasteners Part 16: Washers Section 16: Plain washers for tapping screw and washer assemblies Normal and large series - Product grade A

SANS 1700-16-17:2003/ISO 10673:1998, IDT, Ed. 1

1

Fasteners Part 16: Washers Section 17: Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A

SANS 1700-17-1:1998/ISO 1234:1997, IDT, Ed. 2 (SABS 1700-17-1)

1

Fasteners Part 17: Pins Section 1: Split pins

SANS 1700-17-2:1998/ISO 2338:1997, IDT, Ed. 2

1

Fasteners Part 17: Pins Section 2: Parallel pins, of unhardened steel and austenitic stainless steel

SANS 1700-17-3:1996/ISO 2339:1986, IDT, Ed. 2 (SABS 1700-17-3)

1

Fasteners Part 17: Pins Section 3: Taper pins, unhardened

SANS 1700-17-4:1996/ISO 2340:1986, IDT, Ed. 2

1

Fasteners Part 17: Pins Section 4: Clevis pins without head

SANS 1700-17-5:1996/ISO 2341:1986, IDT, Ed. 2 (SABS 1700-17-5)

1

Fasteners Part 17: Pins Section 5: Clevis pins with head

SANS 1700-17-6:1998/ISO 8733:1997, IDT, Ed. 2

1

Fasteners Part 17: Pins Section 6: Parallel pins with internal thread, of unhardened steel and austenitic stainless steel

SANS 1700-17-7:1998/ISO 8734:1997, IDT, Ed. 2 (SABS 1700-17-7)

1

Fasteners Part 17: Pins Section 7: Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)

SANS 1700-17-8:1998/ISO 8735:1997, IDT, Ed. 2

1

Fasteners Part 17: Pins Section 8: Parallel pins with internal thread, of hardened steel and martensitic stainless steel

SANS 1700-17-9:1996/ISO 8736:1986, IDT, Ed. 1 (SABS 1700-17-9)

1

Fasteners Part 17: Pins Section 9: Taper pins with internal thread, unhardened

SANS 1700-17-10:1996/ISO 8737:1986, IDT, Ed. 1

1

Fasteners Part 17: Pins Section 10: Taper pins with external thread, unhardened

(SABS 1700-16-6)

(SABS 1700-16-10)

(SABS 1700-17-2)

(SABS 1700-17-4)

(SABS 1700-17-6)

(SABS 1700-17-8)

(SABS 1700-17-10)

Page 83

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1700-17-11:1998/ISO 8739:1997, IDT, Ed. 2 (SABS 1700-17-11)

1

Fasteners Part 17: Pins Section 11: Grooved pins Full-length parallel grooved, with pilot

SANS 1700-17-12:1998/ISO 8740:1997, IDT, Ed. 2

1

Fasteners Part 17: Pins Section 12: Grooved pins Full-length parallel grooved, with chamfer

SANS 1700-17-13:1998/ISO 8741:1997, IDT, Ed. 2 (SABS 1700-17-13)

1

Fasteners Part 17: Pins Section 13: Grooved pins Half-length reverse-taper grooved

SANS 1700-17-14:1998/ISO 8742:1997, IDT, Ed. 2

1

Fasteners Part 17: Pins Section 14: Grooved pins One-third-length centre grooved

SANS 1700-17-15:1998/ISO 8743:1997, IDT, Ed. 2 (SABS 1700-17-15)

1

Fasteners Part 17: Pins Section 15: Grooved pins Half-length centre grooved

SANS 1700-17-16:1998/ISO 8744:1997, IDT, Ed. 2

1

Fasteners Part 17: Pins Section 16: Grooved pins Full-length taper grooved

SANS 1700-17-17:1998/ISO 8745:1997, IDT, Ed. 2 (SABS 1700-17-17)

1

Fasteners Part 17: Pins Section 17: Grooved pins Half-length taper grooved

SANS 1700-17-18:1998/ISO 8746:1997, IDT, Ed. 2

1

Fasteners Part 17: Pins Section 18: Grooved pins with round head

SANS 1700-17-19:1998/ISO 8747:1997, IDT, Ed. 2 (SABS 1700-17-19)

1

Fasteners Part 17: Pins Section 19: Grooved pins with countersunk head

SANS 1700-17-20:1998/ISO 8748:1997, IDT, Ed. 2

1

Fasteners Part 17: Pins Section 20: Spring-type straight pins - Coiled, heavy duty

SANS 1700-17-21:1998/ISO 8750:1997, IDT, Ed. 2 (SABS 1700-17-21)

1

Fasteners Part 17: Pins Section 21: Spring-type straight pins - Coiled, standard duty

SANS 1700-17-22:1998/ISO 8751:1997, IDT, Ed. 2

1

Fasteners Part 17: Pins Section 22: Spring-type straight pins - Coiled, light duty

SANS 1700-17-23:1998/ISO 8752:1997, IDT, Ed. 2 (SABS 1700-17-23)

1

Fasteners Part 17: Pins Section 23: Spring-type straight pins - Slotted, heavy duty

SANS 1700-17-24:1998/ISO 13337:1997, IDT, Ed. 1

1

Fasteners Part 17: Pins Section 24: Spring-type straight pins - Slotted, light duty

SANS 1700-18-1:2003/ISO 1051:1999, IDT, Ed. 1 (SABS 1700-18-1)

2

Fasteners Part 18: Rivets Section 1: Rivet shank diameters

SANS 1700-18-2:2004/ISO 14588:2000, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 2: Blind rivets Terminology and definitions

SANS 1700-18-3:2004/ISO 14589:2000, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 3: Blind rivets Mechanical testing

SANS 1700-18-4:2004/ISO 15973:2000, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 4: Closed end blind rivets with break pull mandrel and protruding head - AIA/St

SANS 1700-18-5:2004/ISO 15974:2000, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 5: Closed end blind rivets with break pull mandrel and countersunk head - AIA/St

SANS 1700-18-6:2004/ISO 15975:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 6: Closed end blind rivets with break pull mandrel and protruding head - AI/AIA

(SABS 1700-17-12)

(SABS 1700-17-14)

(SABS 1700-17-16)

(SABS 1700-17-18)

(SABS 1700-17-20)

(SABS 1700-17-22)

(SABS 1700-17-24)

Page 84

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1700-18-7:2004/ISO 15976:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 7: Closed end blind rivets with break pull mandrel and protruding head - St/St

SANS 1700-18-8:2004/ISO 15977:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 8: Open end blind rivets with break pull mandrel and protruding head AIA/St

SANS 1700-18-9:2004/ISO 15978:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 9: Open end blind rivets with break pull mandrel and countersunk head - AIA/St

SANS 1700-18-10:2004/ISO 15979:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 10: Open end blind rivets with break pull mandrel and protruding head - St/St

SANS 1700-18-11:2004/ISO 15980:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 11: Open end blind rivets with break pull mandrel and countersunk head - St/St

SANS 1700-18-12:2004/ISO 15981:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 12: Open end blind rivets with break pull mandrel and protruding head - AIA/AIA

SANS 1700-18-13:2004/ISO 15982:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 13: Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA

SANS 1700-18-14:2004/ISO 15983:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 14: Open end blind rivets with break pull mandrel and protruding head - A2/A2

SANS 1700-18-15:2004/ISO 15984:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 15: Open end blind rivets with break pull mandrel and countersunk head - A2/A2

SANS 1700-18-16:2004/ISO 16582:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 16: Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt

SANS 1700-18-17:2004/ISO 16583:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 17: Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt

SANS 1700-18-18:2004/ISO 16584:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 18: Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt

SANS 1700-18-19:2004/ISO 16585:2002, IDT, Ed. 1

1

Fasteners Part 18: Rivets Section 19: Closed end blind rivets with pull mandrel and protruding head A2/SSt

SANS 1700-19-1:2003/ISO 14579:2001, IDT, Ed. 1

1

Fasteners Part 19: Hexalobular socket head screws Section 1: Hexalobular socket head cap screws

SANS 1700-19-2:2003/ISO 14580:2001, IDT, Ed. 1

1

Fasteners Part 19: Hexalobular socket head screws Section 2: Hexalobular socket cheese head screws

SANS 1700-19-3:2003/ISO 14583:2001, IDT, Ed. 1

1

Fasteners Part 19: Hexalobular socket head screws Section 3: Hexalobular socket pan head screws

SANS 1700-19-4:2003/ISO 14584:2001, IDT, Ed. 1

1

Fasteners Part 19: Hexalobular socket head screws Section 4: Hexalobular socket raised countersunk head screws

SANS 1700-19-5:2003/ISO 14585:2001, IDT, Ed. 1

1

Fasteners Part 19: Hexalobular socket head screws Section 5: Hexalobular socket pan head tapping screws

SANS 1700-19-7:2003/ISO 14587:2001, IDT, Ed. 1

1

Fasteners Part 19: Hexalobular socket head screws Section 7: Hexalobular socket raised countersunk (oval) head tapping screws

Page 85

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1701-2-29:1996/ISO/TR 8646:1985, IDT, Ed. 1 1 (SABS 1701-2-29)

Bearings Part 2: Rolling bearings Section 29: Explanatory notes on ISO 281-1:1977

SANS 1703:2003

1.02

Shade netting

SANS 1707-1:2007

1

Sawn eucalyptus timber Part 1: Proof-graded structural timber

SANS 1707-2:2007

1

Sawn eucalyptus timber Part 2: Brandering and battens

SANS 1709:2008/NFPA 15:2007, IDT, Ed. 11

1

Water spray fixed systems for fire protection

SANS 1713:2004

1.02

Electric cables - Medium-voltage aerial bundled conductors for voltages from 3,8/6,6 kV to 19/33 kV

SANS 1717-1:2005

1

The design of detonator initiation systems for use in mining and civil blasting applications Part 1: Electronic initiation systems

SANS 1717-2:2007

1.01

The design and approval of detonator initiation systems for use in mining and civil blasting applications Part 2: Electric initiation systems - Shot exploder based

2.02

Gaming equipment Part 1: Casino equipment

SANS 1718-2:2005 (SABS 1718-2)

3

Gaming equipment Part 2: Limited payout gaming equipment

SANS 1718-3:2003

2

Gaming equipment Part 3: Monitoring and control systems for gaming equipment

SANS 1718-4:2008 (SABS 1718-4)

2

Gaming equipment Part 4: Wagering record-keeping software

SANS 1718-5:2009

1

Gaming equipment Part 5: Local area and wide area jackpot and progressive jackpot equipment

SANS 1718-7:2007 (SABS 1718-7)

2

Gaming equipment Part 7: Tokens

SANS 1718-8:2007

1

Gaming equipment Part 8: Roulette wheels

SANS 1718-9:2005 (SABS 1718-9)

2

Gaming equipment Part 9: Central monitoring system for limited payout machines

SANS 1718-10:2009

1

Gaming equipment Part 10: Server-based gaming systems

SANS 1726-1:2003/EN 1726-1:1998, IDT, Ed. 1

1

Safety of industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N Part 1: General requirements

SANS 1726-2:2003/EN 1726-2:2000, IDT, Ed. 1

1

Safety of industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and tractors with a drawbar pull up to and including 20 000 N Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads

(SABS 1703)

(SABS 1713)

(SABS 1717-2)

SANS 1718-1:2008 (SABS 1718-1)

(SABS 1718-3)

Page 86

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1733:2007 (SABS 1733)

1.02

WC flushing systems (low-flushing capacity) that operate with flushing cisterns

SANS 1735:2005/ISO 1735:2004, IDT, Ed. 3

1

Cheese and processed cheese products Determination of fat content - Gravimetric method (Reference method)

SANS 1736:2007 (SABS 1736)

1.01

Safety helmets for cricket players

SANS 1737:2008

1.03

Body-worn escape type breathing apparatus

SANS 1739:2008 (SABS 1739)

1.01

Low pressure welded steel cylinders for fire extinguishers

SANS 1745:2003

1.01

Cementitious grouting capsules for use with tendonbased support systems

SANS 1746:2008 (SABS 1746)

1.01

Timber preservative - Tributyltin naphthenatepermethrin

SANS 1748-1:2004

1.01

Glass-fibre-reinforced thermosetting plastics (GRP) pipes Part 1: Pipes for water supply, sewerage and drainage

SANS 1748-2:2005

1

Glass-fibre-reinforced thermosetting plastics (GRP) pipes Part 2: Pipes, fittings and joint assemblies for the conveyance of hazardous chemical substances in industrial applications

SANS 1748-3:2007

1

Glass-fibre-reinforced thermosetting plastics (GRP) pipes Part 3: Pipes, fittings and ancilliaries for underground (buried) fire protection services

SANS 1749:2006

1.01

Glass-reinforced polyester (GRP) poles

SANS 1755:2008 (SABS 1755)

1.03

Petroleum jelly (petrolatum)

SANS 1762:2007

1.01

Continuous pressed laminates (CPLs)

SANS 1763:2008 (SABS 1763)

1.01

Decorative melamine-faced boards

SANS 1774:2007

1.03

Liquefied petroleum gases

SANS 1775:1999 (SABS 1775)

1

Sterile single-use intravenous (IV) infusion sets (administration sets)

SANS 1775-1:2009

1

Intravenous infusion and transfusion equipment (sterile-packed for single use) Part 1: Infusion sets, gravity feed

SANS 1775-2:2009

1

Intravenous infusion and transfusion equipment (sterile-packed for single use) Part 2: Burette sets, gravity feed

SANS 1775-4:2009

1

Intravenous infusion and transfusion equipment (sterile-packed for single use) Part 4: Central venous pressure (CVP) monitoring sets

SANS 1777:2004 (SABS 1777)

1.02

Photoelectric control units for lighting (PECUs)

(SABS 1737)

(SABS 1745)

(SABS 1748-1)

(SABS 1749)

(SABS 1762)

(SABS 1774)

Page 87

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1783-1:2009 (SABS 1783-1)

1.04

Sawn softwood timber Part 1: General requirements

SANS 1783-2:2009

1.07

Sawn softwood timber Part 2: Stress-graded structural timber and timber for frame wall construction

SANS 1783-3:2004 (SABS 1783-3)

1.01

Sawn softwood timber Part 3: Industrial timber

SANS 1783-4:2007

1.03

Sawn softwood timber Part 4: Brandering and battens

SANS 1790-1:2007 (SABS 1790-1)

1.01

Low power radio broadcast transmissions Part 1: AM transmissions

SANS 1790-2:2007

1.01

Low power radio broadcast transmissions Part 2: FM transmissions

SANS 1793:2006/OIML R 126:1998, IDT, Ed. 1 (SABS 1793)

2

Evidential breath analysers

SANS 1795-0:2007

2.01

Road traffic law enforcement systems Part 0: General requirements

SANS 1795-1:2007 (SABS 1795-1)

1.01

Road traffic law enforcement systems Part 1: Laser speed measuring equipment

SANS 1795-2:2007

1.01

Road traffic law enforcement systems Part 2: Radar speed measuring equipment

SANS 1795-3:2007 (SABS 1795-3)

1.01

Road traffic law enforcement systems Part 3: Distance-over-time speed measuring equipment (fixed distance/variable time)

SANS 1795-4:2007

1.01

Road traffic law enforcement systems Part 4: Distance-over-time speed measuring equipment (variable distance/variable time)

SANS 1795-5:2007 (SABS 1795-5)

1.01

Road traffic law enforcement systems Part 5: Data capturing and recording devices for road traffic law enforcement

SANS 1796:2009

2

Application of durable organic powder coatings for architectural aluminium

SANS 1798:2006 (SABS 1798)

2

Bottled tomato sauce

SANS 1799:2004

1.01

Watt-hour meters - AC electronic meters for active energy

SANS 1803-1:2009 (SABS 1803-1)

1.01

Lugs and ferrules for insulated electric cables Part 1: Copper conductors

SANS 1804-1:2007

2

Induction motors Part 1: IEC requirements

SANS 1804-2:2007 (SABS 1804-2)

1.04

Induction motors Part 2: Low-voltage three-phase standard motors

SANS 1804-3:2007

1.01

Induction motors Part 3: Low-voltage three-phase intermittently-rated wound-rotor motors

(SABS 1783-2)

(SABS 1783-4)

(SABS 1790-2)

(SABS 1795-0)

(SABS 1795-2)

(SABS 1795-4)

(SABS 1796)

(SABS 1799)

(SABS 1804-1)

(SABS 1804-3)

Page 88

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1804-4:2006 (SABS 1804-4)

1.01

Induction motors Part 4: Single-phase induction motors

SANS 1806:2009

1.03

Structural bearings - Bridge bearings - Materials, manufacture and installation

SANS 1808-2:2005 (SABS 1808-2)

1.02

Water supply and distribution system components Part 2: Metallic compression type pipe couplings

SANS 1808-5:2008

1.02

Water supply and distribution system components Part 5: Flexible connectors

SANS 1808-9:2008 (SABS 1808-9)

1.02

Water supply and distribution system components Part 9: Metering taps and valves (metallic bodies)

SANS 1808-10:2005

1.02

Water supply and distribution system components Part 10: Copper alloy check valves (spring-loaded)

SANS 1808-13:2009 (SABS 1808-13)

1.02

Water supply and distribution system components Part 13: Diaphragm valves

SANS 1808-15:2007

1.01

Water supply and distribution system components Part 15: Mechanical backflow-prevention devices

SANS 1808-16:2008 (SABS 1808-16)

1.02

Water supply and distribution system components Part 16: Drinking fountain taps

SANS 1808-18:2010

1.02

Water supply and distribution system components Part 18: PVC-U gate valves

SANS 1808-24:2004 (SABS 1808-24)

1.01

Water supply and distribution system components Part 24: Gas-operated water heaters

SANS 1808-30:2004

1.01

Water supply and distribution system components Part 30: Laboratory water taps

SANS 1808-31:2003 (SABS 1808-31)

1.02

Water supply and distribution system components Part 31: Automatic control valves

SANS 1808-32:2005

1.02

Water supply and distribution system components Part 32: Float valves (equilibrium type)

SANS 1808-35:2010 (SABS 1808-35)

1.02

Water supply and distribution system components Part 35: Electronically operated taps and valves

SANS 1808-37:2005

1.02

Water supply and distribution system components Part 37: Single-control mixer taps (plastics)

SANS 1808-44:2005 (SABS 1808-44)

1.02

Water supply and distribution system components Part 44: Pipe saddles

SANS 1808-45:2005

1.02

Water supply and distribution system components Part 45: Pipe repair clamps

SANS 1808-53:2005 (SABS 1808-53)

1.02

Water supply and distribution system components Part 53: Drain cocks for hot-water storage containers

SANS 1808-58:2005

1.02

Water supply and distribution system components Part 58: In-line strainers

1.02

Water supply and distribution system components Part 66: Demand type water taps

(SABS 1806)

(SABS 1808-5)

(SABS 1808-10)

(SABS 1808-15)

(SABS 1808-18)

(SABS 1808-30)

(SABS 1808-32)

(SABS 1808-37)

(SABS 1808-45)

(SABS 1808-58) SANS 1808-66:2005 (SABS 1808-66)

Page 89

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1808-85:2004

1

Water supply and distribution systems Part 85: Oriented polyvinyl chloride (PVC-O) pressure pipes for underground use

SANS 1809:2003

1.01

Fail-safe underground mine locomotive control systems

SANS 1814:2007 (SABS 1814)

1.02

D.C. supplied luminaires for fluorescent lamps

SANS 1815:2006

1.01

Servicing, repair and reconditioning of safes, strongroom doors, vault doors and fire-resistant equipment

SANS 1816:2005

1

Electricity supply - Quality of supply: Power quality instruments

SANS 1817:2008

1.01

Work on glass for glazing

SANS 1819:2006 (SABS 1819)

1.02

Snatch blocks

SANS 1820:2006

1.01

Reconditioned snatch blocks

SANS 1822:2008 (SABS 1822)

1.01

Slide fasteners

SANS 1823:2007

1.01

Touch and close fasteners

SANS 1824:2003

1

Beam trolleys (crawls)

SANS 1825:2005

2

Gas container test stations - General requirements for periodic inspection and testing of portable and transportable refillable gas containers

SANS 1827:2009 (SABS 1827)

1.03

The safety of water treatment chemicals for use in the food industry

SANS 1828:2005

1.03

Cleaning chemicals for use in the food industry

SANS 1829:2005 (SABS 1829)

2

Lubricants for use in the food industry

SANS 1830:2006

1.01

Flexible piping for underground use at service stations and consumer installations

SANS 1833:1977/ISO 1833:1977, IDT, Ed. 2 (SABS ISO 1833)

1

Textiles - Binary fibre mixtures - Quantitative chemical analysis

SANS 1833-1:2007/ISO 1833-1:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 1: General principles of testing

SANS 1833-2:2007/ISO 1833-2:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 2: Ternary fibre mixtures

SANS 1833-3:2007/ISO 1833-3:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 3: Mixtures of acetate and certain other fibres (method using acetone)

(SABS 1809)

(SABS 1815)

(SABS 1817)

(SABS 1820)

(SABS 1823)

(SABS 1825)

(SABS 1828)

(SABS 1830)

Page 90

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1833-4:2007/ISO 1833-4:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite)

SANS 1833-5:2007/ISO 1833-5:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)

SANS 1833-6:2007/ISO 1833-6:2007, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)

SANS 1833-7:2007/ISO 1833-7:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 7: Mixtures of polyamide and certain other fibres (method using formic acid)

SANS 1833-8:2007/ISO 1833-8:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 8: Mixtures of acetate and triacetate fibres (method using acetone)

SANS 1833-9:2007/ISO 1833-9:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol)

SANS 1833-10:2007/ISO 1833-10:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane)

SANS 1833-11:2007/ISO 1833-11:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid)

SANS 1833-12:2007/ISO 1833-12:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide)

SANS 1833-13:2007/ISO 1833-13:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone)

SANS 1833-14:2007/ISO 1833-14:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid)

SANS 1833-15:2007/ISO 1833-15:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content)

SANS 1833-16:2007/ISO 1833-16:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene)

SANS 1833-17:2007/ISO 1833-17:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid)

SANS 1833-18:2007/ISO 1833-18:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 18: Mixtures of silk and wool or hair (method using sulfuric acid)

SANS 1833-19:2007/ISO 1833-19:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 19: Mixtures of cellulose fibres and asbestos (method by heating)

SANS 1833-21:2007/ISO 1833-21:2006, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone)

Page 91

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1833-20:2010/ISO 1833-20:2009, IDT, Ed. 1

1

Textiles - Quantitative chemical analysis Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide)

SANS 1834:2005

1.01

Unsintered polytetrafluoroethylene (PTFE) tapes for engineering applications

SANS 1835:2009 (SABS 1835)

1.01

Ductile iron pipes, fittings, accessories and their joints, for use in high and low pressure systems for potable and foul water

SANS 1838-1:2007

1.02

Electronic self-indicating road vehicle mass measuring equipment for use by road traffic authorities Part 1: Non-automatic mass measuring equipment for static mass measurement

2

Manufacture of measuring container bottles

SANS 1841:2008 (SABS 1841)

2

Control of the quantity of contents in prepacked packages within the prescriptions of legal metrology legislation

SANS 1842:2005

2

High performance engine lubricating oil for petrol engines (for API Service Category SL)

SANS 1843:2005 (SABS 1843)

2

High performance engine lubricating oil for diesel engines (for API Service Category CI-4)

SANS 1844:2009

1.02

The testing of polypropylene woven fabrics for use in flexible intermediate bulk containers (FIBCs) for nondangerous goods

SANS 1845:2003

1

Prefinished sheet metal products for interior and exterior building applications

SANS 1848:2006

1.04

Geyser drip trays

SANS 1849:2008 (SABS 1849)

1.01

Butterfly valves for general purposes

SANS 1850:2003

1

The design and manufacture of commercial kitchen extraction systems

SANS 1851:2008 (SABS 1851)

1.01

Lubricating grease

SANS 1853:2009

1.01

Disinfectants and detergent-disinfectants for use in the food industry

SANS 1854:2005 (SABS 1854)

1.01

The design and manufacture of trestles

SANS 1857:2005

1.01

Copper alloy gate valves - Light duty

SANS 1858:2007 (SABS 1858)

1.01

Oil spill dispersants

SANS 1860:2008

1.01

Wool packs for unprocessed wool

1.01

Packaged water other than natural mineral water

(SABS 1834)

(SABS 1838-1)

SANS 1840:2009 (SABS 1840)

(SABS 1842)

(SABS 1844)

(SABS 1848)

(SABS 1853)

(SABS 1857)

(SABS 1860) SANS 1862:2003 (SABS 1862)

Page 92

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1865:2006 (SABS 1865)

1.01

Point-of-use drinking water treatment units

SANS 1866:2008

1.01

Surgical face masks

SANS 1866:2004

1

Surgical face masks

SANS 1867:2003

1

Sprayed plastics foams for use in mines

SANS 1868:2002 (SABS 1868)

1

Gel detergent cleaner (non-abrasive)

SANS 1869:2001

1

Chrome-tanned bend outer sole leather

SANS 1872:2002 (SABS 1872)

1

Stationery - Marking pens for text highlighting

SANS 1873:2001

1

Vegetable-tanned bend outer sole leather

SANS 1874:2009/NRS 006:2009, IDT, Ed. 2 (SABS 1874)

2

Switchgear - Metal-enclosed ring main units for rated a.c. voltages above 1 kV and up to and including 36 kV

SANS 1875:2007

1.01

Edible oils

SANS 1877:2004

1

A standard land-cover classification scheme for remote-sensing applications in South Africa

SANS 1878-1:2005

1

South African spatial metadata standard Part 1: Core metadata profile

SANS 1879:2004 (SABS 1879)

1.01

Precast concrete suspended slabs

SANS 1882:2003

1

Polymer concrete surface boxes, manhole and inspection covers, gully gratings and frames

SANS 1883-1:2009

1

Geographic information - Addresses Part 1: Data format of addresses

SANS 1883-3:2009

1

Geographic information - Addresses Part 3: Guidelines for address allocation and updates

SANS 1884-1:2004

1

Holding pens for temporary housing of animals Part 1: Holding pens for wild herbivores at auctions and in quarantine facilities

SANS 1884-2:2007

1

Holding pens for temporary housing of animals Part 2: Vehicles for the transportation of wild herbivores by road to holding pens and other facilities

SANS 1884-3:2008

1

Holding pens for temporary housing of animals Part 3: Vehicles for transportation of wild carnivores by road to holding pens and other facilities

SANS 1885:2008/NRS 003:2008, IDT, Ed. 1

2

AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 36 kV

(SABS 1869)

(SABS 1873)

(SABS 1875)

(SABS 1885)

Page 93

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1887-1:2008

1

Tissue paper Part 1: General requirements

SANS 1887-2:2008

1

Tissue paper Part 2: Toilet paper

SANS 1887-3:2008

1

Tissue paper Part 3: Facial tissues

SANS 1887-4:2008

1

Tissue paper Part 4: Paper towels

SANS 1887-5:2008

1

Tissue paper Part 5: Disposable wiping paper (in rolls)

SANS 1887-6:2008

1

Tissue paper Part 6: Paper dressing (medical) towels

SANS 1887-7:2008

1

Tissue paper Part 7: Paper serviettes

SANS 1887-8:2008

1

Tissue paper Part 8: Paper-towel rolls for centrefeed dispensing devices

SANS 1887-9:2008

1

Tissue paper Part 9: Wrappers for citrus and deciduous fruit

SANS 1888:2007

1.01

Incandescent lamps for traffic signal lights

SANS 1891-1:2008 (SABS 1891-1)

1.01

Performance requirements for clothing Part 1: Shirts

SANS 1900:2009

1.02

Monoplanar prefabricated timber roof trusses (nailplated)

SANS 1903:2007 (SABS 1903)

1.01

Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests

SANS 1905:2007

2

Hydraulic brake and clutch fluid (DOT 3 and DOT 4)

SANS 1906:2009

3

Non-pressure paraffin stoves and heaters

SANS 1910:2009

1.02

Portable refillable fire extinguishers

SANS 1913:2008

1.02

Kerosene for domestic heating and illuminating

SANS 1914-1:2002

1

Targeted construction procurement Part 1: Participation of targeted enterprises

SANS 1914-2:2002

1

Targeted construction procurement Part 2: Participation of targeted partners in joint ventures

SANS 1914-3:2002

1

Targeted construction procurement Part 3: Participation of targeted enterprises and targeted partners in joint ventures

(SABS 1888)

(SABS 1900)

Page 94

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1914-4:2002

1

Targeted construction procurement Part 4: Participation of targeted enterprises and targeted labour (local resources)

SANS 1914-5:2002

1

Targeted construction procurement Part 5: Participation of targeted labour

SANS 1914-6:2002

1

Targeted construction procurement Part 6: Participation of targeted enterprises in concession contracts

SANS 1915:2003

1

Woven backfill bags and paddock curtains

SANS 1918:2007

1

Needleless connectors (sterile-packed for single patient use)

SANS 1920:2009

1.01

Mixtures of copper azole compounds for timber preservation

SANS 1921-1:2004

1

Construction and management requirements for works contracts Part 1: General engineering and construction works

SANS 1921-2:2004

1

Construction and management requirements for works contracts Part 2: Accommodation of traffic on public roads occupied by the contractor

SANS 1921-3:2004

1

Construction and management requirements for works contracts Part 3: Structural steelwork

SANS 1921-4:2004

1

Construction and management requirements for works contracts Part 4: Third-party management support in works contracts

SANS 1921-5:2004

1

Construction and management requirements for works contracts Part 5: Earthworks activities which are to be performed by hand

SANS 1921-6:2004

1

Construction and management requirements for works contracts Part 6: HIV/AIDS awareness

SANS 1922:2009

1.02

Acidic cleaners for the cleaning of acid-resistant sanitary ware

SANS 1923:2008

1.01

Scouring compounds

SANS 1924:2007

1

Toilet soaps intended for use in dispensers

SANS 1925:2008

1.01

Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for commercial vehicles and their trailers

SANS 1926:2008

1.01

Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for motor vehicles and their trailers

SANS 1928:2009/ISO 1928:2009, IDT, Ed. 3

2

Solid mineral fuels - Determination of gross calorific value by the bomb calorific method, and calculation of net calorific value

SANS 1929:2005

1.01

Ambient air quality - Limits for common pollutants

SANS 1931:2003

1

Particle board - Highly moisture-resistant exterior type

(SABS ISO 1928)

Page 95

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 1934:2004

1

Live working - Portable equipment for earthing or earthing and short-circuiting - National modifications to international requirements

SANS 1935:2004

1

Automotive biodiesel fuel

SANS 1937:2006

1

Cosmetic products - Quantity and marking

SANS 1951:2008/ISO 1951:2007, IDT, Ed. 3

1

Presentation/representation of entries in dictionaries - Requirements, recommendations and information

SANS 1952:2009/ISO 1952:2008, IDT, Ed. 2

1

Solid mineral fuels - Determination of extractable metals in dilute hydrochloric acid

SANS 1953:1994/ISO 1953:1994, IDT, Ed. 2

1

Hard coal - Size analysis by sieving

SANS 1973-1:2007

1

Low-voltage switchgear and controlgear ASSEMBLIES Part 1: Type-tested ASSEMBLIES with stated deviations and a rated short-circuit withstand strength above 10 kA

SANS 1973-3:2008

1

Low-voltage switchgear and controlgear ASSEMBLIES Part 3: Safety of ASSEMBLIES with a rated prospective short-circuit current of up to and including 10 kA

SANS 1973-7:2008

1

Low-voltage switchgear and controlgear ASSEMBLIES Part 7: Requirements for testing under conditions of arcing due to internal fault

SANS 1973-8:2008

1

Low-voltage switchgear and controlgear ASSEMBLIES Part 8: Safety of minimally tested ASSEMBLIES (MTA) with a rated short-circuit current above 10 kA and a rated busbar current of up to and including 1 600 A a.c. and d.c.

SANS 1977:2006/ISO 1977:2000, IDT, Ed. 1

1

Conveyor chains, attachments and sprockets

SANS 2001-BE1:2008

1

Construction works Part BE1: Earthworks (general)

SANS 2001-BS1:2008

1

Construction works Part BS1: Site clearance

SANS 2001-CC1:2007

1

Construction works Part CC1: Concrete works (structural)

SANS 2001-CC2:2007

1

Construction works Part CC2: Concrete works (minor works)

SANS 2001-CG1:2007

1

Construction works Part CG1: Installation of glazing in window and door frames

SANS 2001-CM1:2007

1

Construction works Part CM1: Masonry walling

SANS 2001-CS1:2005

1

Construction works Part CS1: Structural steelwork

SANS 2001-CT1:2007

1

Construction works Part CT1: Structural timberwork (flooring)

(SABS ISO 1953)

Page 96

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 2001-CT2:2009

1.01

Construction works Part CT2: Structural timberwork (roofing)

SANS 2001-DP1:2008

1

Construction works Part DP1: Earthworks for buried pipelines and prefabricated culverts

SANS 2001-EM1:2007

1

Construction works Part EM1: Cement plaster

SANS 2041:2009/ISO 2041:2009, IDT, Ed. 3

1

Mechanical vibration, shock and condition monitoring - Vocabulary

SANS 2060:1994/ISO 2060:1994, IDT, Ed. 2 (SABS ISO 2060)

1

Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method

SANS 2061:1995/ISO 2061:1995, IDT, Ed. 2

1

Textiles - Determination of twist in yarns - Direct counting method

SANS 2062:1995/ISO 2062:1993, IDT, Ed. 2 (SABS ISO 2062)

1

Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break

SANS 2063:2008/ISO 2063:2005, IDT, Ed. 3

2

Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys

SANS 2064:2008/ISO 2064:1996, IDT, Ed. 3 (SABS ISO 2064)

2

Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness

SANS 2076:1999/ISO 2076:1999, IDT, Ed. 4

1

Textiles - Man-made fibres - Generic names

SANS 2081:1986/ISO 2081:1986, IDT, Ed. 2 (SABS ISO 2081)

1

Metallic coatings - Electroplated coatings of zinc on iron or steel

SANS 2082:1986/ISO 2082:1986, IDT, Ed. 2

1

Metallic coatings - Electroplated coatings of cadmium on iron or steel

SANS 2093:1986/ISO 2093:1986, IDT, Ed. 2 (SABS ISO 2093)

1

Electroplated coatings of tin - Specification and test methods

SANS 2106:1982/ISO 2106:1982, IDT, Ed. 2

1

Anodizing of aluminium and its alloys Determination of mass per unit area (surface density) of anodic oxide coatings - Gravimetric method

SANS 2108:2005/ISO 2108:2005, IDT, Ed. 4

1

Information and documentation - International Standard Book Number (ISBN)

SANS 2135:1984/ISO 2135:1984, IDT, Ed. 2 (SABS ISO 2135)

1

Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxide coatings using artificial light

SANS 2143:1981/ISO 2143:1981, IDT, Ed. 1

1

Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxide coatings after sealing - Dye spot test with prior acid treatment

SANS 2177:2008/ISO 2177:2003, IDT, Ed. 3 (SABS ISO 2177)

2

Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution

SANS 2178:1982/ISO 2178:1982, IDT, Ed. 2

1

Non-magnetic coatings on magnetic substrates Measurement of coating thickness - Magnetic method

(SABS ISO 2061)

(SABS ISO 2063)

(SABS ISO 2076)

(SABS ISO 2082)

(SABS ISO 2106)

(SABS ISO 2143)

(SABS ISO 2178)

Page 97

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 2179:1986/ISO 2179:1986, IDT, Ed. 2 (SABS ISO 2179)

1

Electroplated coatings of tin-nickel alloy Specification and test methods

SANS 2200:2005/CISPR 20:2005, IDT, Ed. 5.2

1.02

Sound and television broadcast receivers and associated equipment - Immunity characteristics Limits and methods of measurement

SANS 2220-1-1:2006 (SABS 2220-1.1)

1.02

Electrical security systems Part 1.1: Intruder alarm systems - General requirements

SANS 2220-1-2:2006

1.01

Electrical security systems Part 1.2: Intruder alarm systems: Infra-red beam interruption detectors

SANS 2220-1-3:2006 (SABS 2220-1.3)

1.01

Electrical security systems Part 1-3: Intruder alarm systems - Ultrasonic Doppler detectors

SANS 2220-1-4:2007

1.01

Electrical security systems Part 1-4: Intruder alarm systems - Microwave Doppler detectors

1.01

Electrical security systems Part 1-5: Intruder alarm systems - Passive infra-red detectors

SANS 2220-1-6:2007/IEC 60839-2-7:1994, NEQ, Ed. 1.01 1 (SABS 2220-1.6)

Electrical security systems Part 1.6: Intruder alarm systems - Passive glass-break detectors for use in buildings

SANS 2220-1-7:2006 (SABS 2220-1.7)

1.01

Electrical security systems Part 1.7: Intruder alarm systems: Power units

SANS 2220-1-8:2006

1.02

Electrical security systems Part 1-8: Environmental testing

SANS 2220-2-1:2005 (SABS 2220-2.1)

1.01

Electrical security systems Part 2-1: Access control systems: General characteristics

SANS 2220-2-2:2005

1.01

Electrical security systems Part 2-2: Access control systems: Central processor

SANS 2220-2-3:2005 (SABS 2220-2.3)

1.01

Electrical security systems Part 2-3: Access control systems: Card readers

SANS 2220-2-4:2005

1.01

Electrical security systems Part 2.4: Access control systems: Reader controllers

SANS 2220-2-5:2005 (SABS 2220-2.5)

1.01

Electrical security systems Part 2-5: Access control systems: Biometric readers

SANS 2220-2-6:2005

1.01

Electrical security systems Part 2-6: Access control systems: Access cards

SANS 2220-2-7:2005 (SABS 2220-2.7)

1.02

Electrical security systems Part 2.7: Access control systems: Barriers

SANS 2230:2003/ISO 2230:2002, IDT, Ed. 2

1

Rubber products - Guidelines for storage

SANS 2262:1984/ISO 2262:1984, IDT, Ed. 2 (SABS ISO 2262)

1

General purpose thimbles for use with steel wire ropes - Specification

SANS 2306:1993/MPT 1306:1993, IDT

1

Continuous tone controlled signalling system (CTCSS) for use in the land mobile services Performance specification

(SABS 2220-1.2)

(SABS 2220-1.4) SANS 2220-1-5:2007 (SABS 2220-1.5)

(SABS 2220-1.8)

(SABS 2220-2.2)

(SABS 2220-2.4)

(SABS 2220-2.6)

(SABS MPT 1306)

Page 98

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 2313:2008/ISO 2313:1972, IDT, Ed. 1

1

Textile fabrics - Determination of the recovery from creasing of the horizontally folded specimen by measuring the angle of recovery

SANS 2327:1991/MPT 1327:1991, IDT

1

A signalling standard for trunked private land mobile radio systems

SANS 2328:2009/ISO 2328:2007, IDT, Ed. 3

2

Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions

SANS 2330:2007/ISO 2330:2002, IDT, Ed. 3

1

Fork-lift trucks - Fork arms - Technical characteristics and testing

SANS 2343:1991/MPT 1343:1991, IDT (SABS MPT 1343)

2

System interface specification for radio units to be used with commercial trunked networks operating in Band III sub-bands 1 and 2

SANS 2347:1991/MPT 1347:1991, IDT

2

Radio interface specification for commercial trunked networks operating in Band III, sub-bands 1 and 2

SANS 2352:1991/MPT 1352:1991, MOD (SABS MPT 1352)

2

Test schedule for the approval of radio units to be used with commercial trunked networks operating in Band III subbands 1 and 2

SANS 2361:1982/ISO 2361:1982, IDT, Ed. 2

1

Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method

SANS 2362:1997/MPT 1362:1997, IDT, Ed. 3 (SABS MPT 1362)

2

Installation of mobile radio equipment in land based vehicles

SANS 2374:2008/ISO 2374:1983, IDT, Ed. 1

1

Lifting appliances - Range of maximum capacities for basic models

SANS 2394:2003/ISO 2394:1998, IDT, Ed. 2

1

General principles on reliability for structures

SANS 2398:2008/ISO 2398:2006, IDT, Ed. 5

1

Rubber hoses, textile-reinforced, for compressed-air - Specification

SANS 2401:1972/ISO 2401:1972, IDT, Ed. 1 (SABS ISO 2401)

1

Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient

SANS 2408:2005/ISO 2408:2004, IDT, Ed. 3

2

Steel wire ropes for general purposes - Minimum requirements

SANS 2409:2008/ISO 2409:2007, IDT, Ed. 3 (SABS ISO 2409)

2

Paints and varnishes - Cross-cut test

SANS 2415:2005/ISO 2415:2004, IDT, Ed. 3

2

Forged shackles for general lifting purposes - Dee shackles and bow shackles

SANS 2417:2009/ISO 2417:2002, IDT, Ed. 2

1

Leather - Physical and mechanical tests Determination of static absorption of water

SANS 2418:2009/ISO 2418:2002, IDT, Ed. 2

1

Leather - Chemical, physical and mechanical and fastness tests - Sampling location

SANS 2424:1992/ISO 2424:1992, IDT, Ed. 3 (SABS ISO 2424)

1

Textile floor coverings - Vocabulary

SANS 2446:2005/ISO 2446:1976, IDT, Ed. 1

1

Milk - Determination of fat content (Routine method)

(SABS MPT 1327)

(SABS MPT 1347)

(SABS ISO 2361)

(SABS ISO 2408)

(SABS ISO 2415)

Page 99

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 2450:2005/ISO 2450:1999, IDT, Ed. 3

1

Cream - Determination of fat content - Gravimetric method (Reference method)

SANS 2503:2007/ISO 2503:1998, IDT, Ed. 2

1

Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar

SANS 2505:2007/ISO 2505:2005, IDT, Ed. 2

1

Thermoplastics pipes - Longitudinal reversion - Test method and parameters

SANS 2507-1:1995/ISO 2507-1:1995, IDT, Ed. 1

1

Thermoplastics pipes and fittings - Vicat softening temperature Part 1: General test method

SANS 2531:2010/ISO 2531:2009, IDT, Ed. 6

1

Ductile iron pipes, fittings, accessories and their joints for water applications

SANS 2551:1981/ISO 2551:1981, IDT, Ed. 2

1

Machine-made textile floor coverings Determination of dimensional changes due to the effects of varied water and heat conditions

SANS 2553:1992/ISO 2553:1992, IDT, Ed. 3 (SABS ISO 2553)

1

Welded, brazed and soldered joints - Symbolic representation on drawings

SANS 2560:2008/ISO 2560:2002, IDT, Ed. 2

2

Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification

SANS 2566-1:2005/ISO 2566-1:1984, IDT, Ed. 2

1

Steel - Conversion of elongation values Part 1: Carbon and low alloy steels

SANS 2570:2006/ISO 257:2004, IDT, Ed. 3

1

Pesticides and other agrochemicals - Principles for the selection of common names

SANS 2589:2009/ISO 2589:2002, IDT, Ed. 2

1

Leather - Physical and mechanical tests Determination of thickness

SANS 2631-1:1997/ISO 2631-1:1997, IDT, Ed. 2

1

Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration Part 1: General requirements

SANS 2709:2008/ISO 2709:2008, IDT, Ed. 4

1

Information and documentation - Format for information exchange

SANS 2781:2003/ISO 2781:1988, IDT, Ed. 3

1

Rubber, vulcanized - Determination of density

SANS 2788:2005/ISO 2788:1986, IDT, Ed. 2

1

Documentation - Guidelines for the establishment and development of monolingual thesauri

SANS 2789:2009/ISO 2789:2006, IDT, Ed. 4

1

Information and documentation - International library statistics

SANS 2795:2005/ISO 2795:1991, IDT, Ed. 4

1

Plain bearings - Sintered bushes - Dimensions and tolerances

SANS 2808:2008/ISO 2808:2007, IDT, Ed. 4

3

Paints and varnishes - Determination of film thickness

SANS 2811-1:1997/ISO 2811-1:1997, IDT, Ed. 1 (SABS ISO 2811-1)

1

Paints and varnishes - Determination of density Part 1: Pyknometer method

SANS 2813:1994/ISO 2813:1994, IDT, Ed. 3

2

Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85°

(SABS ISO 2507-1)

(SABS ISO 2551)

(SABS ISO 2560)

(SABS ISO 2631-1)

(SABS ISO 2808)

(SABS ISO 2813)

Page 100

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 2814:1973/ISO 2814:1973, IDT, Ed. 1 (SABS ISO 2814)

1

Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour

SANS 2819:1980/ISO 2819:1980, IDT, Ed. 2

1

Metallic coatings on metallic substrates Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion

SANS 2859-1:2004/ISO 2859-1:1999, IDT, Ed. 2

1

Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

SANS 2859-3:2008/ISO 2859-3:2005, IDT, Ed. 2

1

Sampling procedures for inspection by attributes Part 3: Skip-lot sampling procedures

SANS 2859-4:2008/ISO 2859-4:2002, IDT, Ed. 2

1

Sampling procedures for inspection by attributes Part 4: Procedures for assessment of declared quality levels

SANS 2859-5:2008/ISO 2859-5:2005, IDT, Ed. 1

1

Sampling procedures for inspection by attributes Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection

SANS 2859-10:2008/ISO 2859-10:2006, IDT, Ed. 1

1

Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes

SANS 2860:2003/ISO 2860:1992, IDT, Ed. 4

1

Earth-moving machinery - Minimum access dimensions

SANS 2867:2008/ISO 2867:2006, IDT, Ed. 6

2

Earth-moving machinery - Access systems

SANS 2878:2003/ISO 2878:1987, IDT, Ed. 2

1

Rubber, vulcanized - Antistatic and conductive products - Determination of electrical resistance

SANS 2882:2003/ISO 2882:1979, IDT, Ed. 1

1

Rubber, vulcanized - Antistatic and conductive products for hospital use - Electrical resistance limits

SANS 2883:2003/ISO 2883:1980, IDT, Ed. 1

1

Rubber, vulcanized - Antistatic and conductive products for industrial use - Electrical resistance limits

SANS 2931:1983/ISO 2931:1983, IDT, Ed. 2

1

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance

SANS 3000-1:2009

2

Railway safety management Part 1: General

SANS 3000-2-1:2008

1

Railway safety management Part 2-1: Technical requirements for engineering and operational standards - General

SANS 3000-2-2:2008

1

Railway safety management Part 2-2: Technical requirements for engineering and operational standards - Track, civil and electrical infrastructure

SANS 3000-2-3:2008

1

Railway safety management Part 2-3: Technical requirements for engineering and operational standards - Rolling stock

SANS 3001-PR1:2008

1

Civil engineering test methods Part PR1: Determination of uncertainty of measurement, repeatability, reproducibility and bias

SANS 3001-AG1:2009

1

Civil engineering test methods Part AG1: Particle size analysis of aggregates by sieving

(SABS ISO 2819)

(SABS ISO 2931)

Page 101

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 3001-GR1:2008

1

Civil engineering test methods Part GR1: Wet preparation and particle size analysis

SANS 3001-AG2:2009

1

Civil engineering test methods Part AG2: Determination of the average least dimension of aggregates by direct measurement

SANS 3001-GR2:2009

1

Civil engineering test methods Part GR2: Dry preparation and dry particle size analysis of graded materials

SANS 3001-AG3:2009

1

Civil engineering test methods Part AG3: Determination of the average least dimension of aggregates by computation

SANS 3001-AG4:2009

1

Civil engineering test methods Part AG4: Determination of the flakiness index of coarse aggregate

SANS 3001-PR5:2009

1

Civil engineering test methods Part PR5: Computation of soil-mortar percentages, coarse sand ratio, grading modulus and fineness modulus

SANS 3001-GR10:2008

1

Civil engineering test methods Part GR10: Determination of the one-point liquid limit, plastic limit, plasticity index and linear shrinkage

SANS 3001-PR10:2009

1

Civil engineering test methods Part PR10: Checking, handling, maintenance and verification of test sieves

SANS 3001-GR11:2008

1

Civil engineering test methods Part GR11: Determination of the liquid limit with the two-point method

SANS 3001-GR12:2008

1

Civil engineering test methods Part GR12: Determination of the flow curve liquid limit

SANS 3001-GR20:2008

1

Civil engineering test methods Part GR20: Determination of the moisture content by ovendrying

SANS 3056:1986/ISO 3056:1986, IDT, Ed. 2

1

Non-calibrated round steel link lifting chain and chain slings - Use and maintenance

SANS 3059:2004/ISO 3059:2001, IDT, Ed. 2

1

Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions

SANS 3071:2007/ISO 3071:2005, IDT, Ed. 3

1

Textiles - Determination of pH of aqueous extract

SANS 3074:2003/ISO 3074:1975, IDT, Ed. 1

1

Wool - Determination of dichloromethane-soluble matter in combed sliver

SANS 3077:2008/ISO 3077:2001, IDT, Ed. 3

1

Short-link chain for lifting purposes - Grade T (types T, DAT and DT), fine-tolerance hoist chain

SANS 3096:2005/ISO 3096:1996, IDT, Ed. 2

1

Rolling bearings - Needle rollers - Dimensions and tolerances

SANS 3107:2008/ISO 3107:2004, IDT, Ed. 3

1

Dentistry - Dental zinc oxide/eugenol cements and zinc oxide/non-eugenol cements

SANS 3126:2008/ISO 3126:2005, IDT, Ed. 2 (SABS ISO 3126)

2

Plastics piping systems - Plastics components Determination of dimensions

SANS 3127:1994/ISO 3127:1994, IDT, Ed. 1

1

Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method

(SABS ISO 3056)

(SABS ISO 3127)

Page 102

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 3166-1:2007/ISO 3166-1:2006, IDT, Ed. 2

1

Codes for the representation of names of countries and their subdivisions Part 1: Country codes

SANS 3166-2:2008/ISO 3166-2:2007, IDT, Ed. 2

1

Codes for the representation of names of countries and their subdivisions Part 2: Country subdivision code

SANS 3166-3:2005/ISO 3166-3:1999, IDT, Ed. 1

1

Codes for the representation of names of countries and their subdivisions Part 3: Code for formerly used names of countries

SANS 3189-1:1985/ISO 3189-1:1985, IDT, Ed. 1

1

Sockets for wire ropes for general purposes Part 1: General characteristics and conditions of acceptance

SANS 3189-2:1985/ISO 3189-2:1985, IDT, Ed. 1 (SABS ISO 3189-2)

1

Sockets for wire ropes for general purposes Part 2: Special requirements for sockets produced by forging or machined from the solid

SANS 3189-3:1985/ISO 3189-3:1985, IDT, Ed. 1

1

Sockets for wire ropes for general purposes Part 3: Special requirements for sockets produced by casting

SANS 3210:1983/ISO 3210:1983, IDT, Ed. 2 (SABS ISO 3210)

1

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution

SANS 3228:2005/ISO 3228:1993, IDT, Ed. 3

1

Rolling bearings - Cast and pressed housings for insert bearings

SANS 3233:1998/ISO 3233:1998, IDT, Ed. 3

1

Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the density of a dried coating

SANS 3251:2007/ISO 3251:2003, IDT, Ed. 3 (SABS ISO 3251)

2

Paints, varnishes and plastics - Determination of non-volatile-matter content

SANS 3253:2004/ISO 3253:1998, IDT, Ed. 2

1

Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes

SANS 3270:1984/ISO 3270:1984, IDT, Ed. 3 (SABS ISO 3270)

1

Paints and varnishes and their raw materials Temperatures and humidities for conditioning and testing

SANS 3297:2009/ISO 3297:2007, IDT, Ed. 4

1

Information and documentation - International standard serial number (ISSN)

SANS 3301:2004/ISO 3301:1975, IDT, Ed. 1

1

Statistical interpretation of data - Comparison of two means in the case of paired observations

SANS 3302-1:2003/ISO 3302-1:1996, IDT, Ed. 1

1

Rubber - Tolerances for products Part 1: Dimensional tolerances

SANS 3302-2:2003/ISO 3302-2:1998, IDT, Ed. 1

1

Rubber - Tolerances for products Part 2: Geometrical tolerances

SANS 3310-1:2000/ISO 3310-1:2000, IDT, Ed. 4

1

Test sieves - Technical requirements and testing Part 1: Test sieves of metal wire cloth

SANS 3310-2:1999/ISO 3310-2:1999, IDT, Ed. 4 (SABS ISO 3310-2)

1

Test sieves - Technical requirements and testing Part 2: Test sieves of perforated metal plate

SANS 3380:2010/ISO 3380:2002, IDT, Ed. 2

1

Leather - Physical and mechanical tests Determination of shrinkage temperature up to 100 °C

(SABS ISO 3189-1)

(SABS ISO 3189-3)

(SABS ISO 3233)

(SABS ISO 3310-1)

Page 103

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 3387:2003/ISO 3387:1994, IDT, Ed. 2

1

Rubber - Determination of crystallization effects by hardness measurements

SANS 3448:2008/ISO 3448:1992, IDT, Ed. 2

1

Industrial liquid lubricants - ISO viscosity classification

SANS 3449:2008/ISO 3449:2005, IDT, Ed. 5

2

Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements

SANS 3450:2003/ISO 3450:1996, IDT, Ed. 3

1

Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures

SANS 3452-1:2009/ISO 3452-1:2008, IDT, Ed. 1

1

Non-destructive testing - Penetrant testing Part 1: General principles

SANS 3452-2:2009/ISO 3452-2:2006, IDT, Ed. 2

2

Non-destructive testing - Penetrant testing Part 2: Testing of penetrant materials

SANS 3452-3:1998/ISO 3452-3:1998, IDT, Ed. 1 (SABS ISO 3452-3)

1

Non-destructive testing - Penetrant testing Part 3: Reference test blocks

SANS 3452-4:1998/ISO 3452-4:1998, IDT, Ed. 1

1

Non-destructive testing - Penetrant testing Part 4: Equipment

SANS 3471:2009/ISO 3471:2008, IDT, Ed. 4

2

Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements

SANS 3497:2008/ISO 3497:2000, IDT, Ed. 2

2

Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods

SANS 3512:2006/ISO 3512:1992, IDT, Ed. 2

1

Heavy-duty cranked-link transmission chains

SANS 3534-1:2007/ISO 3534-1:2006, IDT, Ed. 2

2

Statistics - Vocabulary and symbols Part 1: General statistical terms and terms used in probability

SANS 3534-2:2007/ISO 3534-2:2006, IDT, Ed. 2

2

Statistics - Vocabulary and symbols Part 2: Applied statistics

SANS 3534-3:2004/ISO 3534-3:1999, IDT, Ed. 2

1

Statistics - Vocabulary and symbols Part 3: Design of experiments

SANS 3543:2008/ISO 3543:2000, IDT, Ed. 2 (SABS ISO 3543)

2

Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method

SANS 3548:2005/ISO 3548:1999, IDT, Ed. 2

1

Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test

SANS 3574:2003/ISO 3574:1999, IDT, Ed. 3 (SABS ISO 3574)

2

Cold-reduced carbon steel sheet of commercial and drawing qualities

SANS 3575:2008/ISO 3575:2005, IDT, Ed. 3

2

Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities

SANS 3580:2006/ISO 3580:2004, IDT, Ed. 2 (SABS ISO 3580)

2

Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels Classification

SANS 3581:2008/ISO 3581:2003, IDT, Ed. 2

2

Welding consumables - Covered electrodes for manual metal arc welding of stainless and heatresisting steels - Classification

(SABS ISO 3452-2)

(SABS ISO 3452-4)

(SABS ISO 3497)

(SABS ISO 3575)

(SABS ISO 3581)

Page 104

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 3613:2008/ISO 3613:2000, IDT, Ed. 2 (SABS ISO 3613)

2

Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods

SANS 3657:2003/ISO 3657:2002, IDT, Ed. 3

1

Animal and vegetable fats and oils - Determination of saponification value

SANS 3668:1998/ISO 3668:1998, IDT, Ed. 2 (SABS ISO 3668)

1

Paints and varnishes - Visual comparison of the colour of paints

SANS 3696:1987/ISO 3696:1987, IDT, Ed. 1

1

Water for analytical laboratory use - Specification and test methods

SANS 3741:1999/ISO 3741:1999, IDT, Ed. 3 (SABS ISO 3741)

1

Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms

SANS 3743-1:1994/ISO 3743-1:1994, IDT, Ed. 1

1

Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields Part 1: Comparison method for hard-walled test rooms

1

Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms

1

Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane

1

Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane

SANS 3759:2008/ISO 3759:2007, IDT, Ed. 4 (SABS ISO 3759)

2

Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change

SANS 3779:1983/ISO 3779:1983, IDT, Ed. 3

1

Road vehicles - Vehicle identification number (VIN) Content and structure

SANS 3780:1983/ISO 3780:1983, IDT, Ed. 2 (SABS ISO 3780)

1

Road vehicles - World manufacturer identifier (WMI) code

SANS 3795:1989/ISO 3795:1989, IDT, Ed. 2

1

Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials

SANS 3821:2004/ISO 3821:1998, IDT, Ed. 3

1

Gas welding equipment - Rubber hoses for welding, cutting and allied processes

SANS 3834-1:2006/ISO 3834-1:2005, IDT, Ed. 2

2

Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements

SANS 3834-2:2006/ISO 3834-2:2005, IDT, Ed. 2

2

Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements

SANS 3834-3:2006/ISO 3834-3:2005, IDT, Ed. 2

2

Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements

SANS 3834-4:2006/ISO 3834-4:2005, IDT, Ed. 2

2

Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements

(SABS ISO 3696)

(SABS ISO 3743-1)

SANS 3743-2:1994/ISO 3743-2:1994, IDT, Ed. 1 (SABS ISO 3743-2)

SANS 3744:1994/ISO 3744:1994, IDT, Ed. 2 (SABS ISO 3744)

SANS 3746:1995/ISO 3746:1995, IDT, Ed. 2 (SABS ISO 3746)

(SABS ISO 3779)

(SABS ISO 3795)

Page 105

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 3834-5:2006/ISO 3834-5:2005, IDT, Ed. 1

1

Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4

SANS 3834-6:2009/ISO/TR 3834-6:2007, IDT, Ed. 1

1

Quality requirements for fusion welding of metallic materials Part 6: Guidelines on implementing ISO 3834

SANS 3882:2008/ISO 3882:2003, IDT, Ed. 3

2

Metallic and other inorganic coatings - Review of methods of measurement of thickness

SANS 3892:2000/ISO 3892:2000, IDT, Ed. 2 (SABS ISO 3892)

2

Conversion coatings on metallic materials Determination of coating mass per unit area Gravimetric methods

SANS 3894:2007/ISO 3894:2005, IDT, Ed. 3

1

Road vehicles - Wheels/rims for commercial vehicles - Test methods

SANS 3901:2009/ISO 3901:2001, IDT, Ed. 2

1

Information and documentation - International standard recording code (ISRC)

SANS 3950:2008/ISO 3950:1995, IDT, Ed. 2

1

Dentistry - Designation system for teeth and areas of the oral cavity

SANS 3951-1:2008/ISO 3951-1:2005, IDT, Ed. 1

1

Sampling procedures for inspection by variables Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-bylot inspection for a single quality characteristic and a single AQL

SANS 3951-2:2008/ISO 3951-2:2006, IDT, Ed. 1

1

Sampling procedures for inspection by variables Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics

SANS 3951-3:2008/ISO 3951-3:2007, IDT, Ed. 1

1

Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

SANS 3951-5:2008/ISO 3951-5:2006, IDT, Ed. 1

1

Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)

SANS 3996:2007/ISO 3996:1995, IDT, Ed. 3

1

Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid

SANS 4030:1983/ISO 4030:1983, IDT, Ed. 2

1

Road vehicles - Vehicle identification number (VIN) Location and attachment

SANS 4044:2007/BS 4044:1989, IDT, Ed. 2

1

Methods for determination of fibre length by comb sorter diagram

SANS 4045:2010/ISO 4045:2008, IDT, Ed. 2

1

Leather - Chemical tests - Determination of pH

SANS 4047:1977/ISO 4047:1977, IDT, Ed. 1 (SABS ISO 4047)

1

Leather - Determination of sulphated total ash and sulphated water-insoluble ash

SANS 4063:2005/ISO 4063:1998, IDT, Ed. 3

2

Welding and allied processes - Nomenclature of processes and reference numbers

(SABS ISO 3882)

(SABS ISO 4030)

(SABS ISO 4063)

Page 106

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 4065:1996/ISO 4065:1996, IDT, Ed. 2 (SABS ISO 4065)

1

Thermoplastics pipes - Universal wall thickness table

SANS 4074:2003/ISO 4074:2002, IDT, Ed. 1

1

Natural latex rubber condoms - Requirements and test methods

SANS 4091:2005/ISO 4091:2003, IDT, Ed. 3 (SABS ISO 4091)

2

Road vehicles - Connectors for the electrical connection of towing and towed vehicles Definitions, tests and requirements

SANS 4098:2010/ISO 4098:2006, IDT, Ed. 1

1

Leather - Chemical tests - Determination of watersoluble matter, water-soluble inorganic matter and water-soluble organic matter

SANS 4136:2004/ISO 4136:2001, IDT, Ed. 2 (SABS ISO 4136)

2

Destructive tests on welds in metallic materials Transverse tensile test

SANS 4217:2009/ISO 4217:2008, IDT, Ed. 7

1

Codes for the representation of currencies and funds

SANS 4301-1:2002/ISO 4301-1:1986, IDT, Ed. 2

1

Cranes and lifting appliances - Classification Part 1: General

SANS 4301-2:2010/ISO 4301-2:2009, IDT, Ed. 2

2

Cranes - Classification Part 2: Mobile cranes

SANS 4301-3:2002/ISO 4301-3:1993, IDT, Ed. 1

1

Cranes - Classification - Part 3: Tower cranes

SANS 4301-5:1991/ISO 4301-5:1991, IDT, Ed. 1

1

Cranes - Classification Part 5: Overhead travelling and portal bridge cranes

SANS 4302:2002/ISO 4302:1981, IDT, Ed. 1

1

Cranes - Wind load assessment

SANS 4304:2008/ISO 4304:1987, IDT, Ed. 1

1

Cranes other than mobile and floating cranes General requirements for stability

SANS 4305:2007/ISO 4305:1991, IDT, Ed. 2

1

Mobile cranes - Determination of stability

SANS 4306-3:2007/ISO 4306-3:2003, IDT, Ed. 3

1

Cranes - Vocabulary Part 3: Tower cranes

SANS 4308-1:2005/ISO 4308-1:2003, IDT, Ed. 3 (SABS ISO 4308-1)

2

Cranes and lifting appliances - Selection of wire ropes Part 1: General

SANS 4308-2:2007/ISO 4308-2:1988, IDT, Ed. 1

1

Cranes and lifting appliances - Selection of wire ropes Part 2: Mobile cranes - Coefficient of utilization

SANS 4309:2005/ISO 4309:2004, IDT, Ed. 3 (SABS ISO 4309)

2

Cranes - Wire ropes - Care, maintenance, installation, examination and discard

SANS 4310:2002/ISO 4310:1981, IDT, Ed. 1

1

Cranes - Test code and procedures

SANS 4344:2005/ISO 4344:2004, IDT, Ed. 2 (SABS ISO 4344)

2

Steel wire ropes for lifts - Minimum requirements

SANS 4347:2006/ISO 4347:2004, IDT, Ed. 4

1

Leaf-chains, clevises and sheaves - Dimensions, measuring forces and tensile strengths

(SABS ISO 4301-5)

Page 107

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 4348:1983/ISO 4348:1983, IDT, Ed. 2 (SABS ISO 4348)

1

Flat-top chains and associated chain wheels for conveyors

SANS 4374:2007/ASTM D 4374:2006, IDT

1

Standard test methods for cyanides in water Automated methods for total cyanide, weak acid dissociable cyanide, and thiocyanate

SANS 4378-1:2005/ISO 4378-1:1997, IDT, Ed. 2

1

Plain bearings - Terms, definitions and classification Part 1: Design, bearing materials and their properties

SANS 4378-2:2005/ISO 4378-2:1983, IDT, Ed. 1

1

Plain bearings - Terms, definitions and classification Part 2: Friction and wear

SANS 4378-3:2005/ISO 4378-3:1983, IDT, Ed. 1

1

Plain bearings - Terms, definitions and classification Part 3: Lubrication

SANS 4379:2005/ISO 4379:1993, IDT, Ed. 2

1

Plain bearings - Copper alloy bushes

SANS 4381:2005/ISO 4381:2000, IDT, Ed. 3

1

Plain bearings - Lead and tin casting alloys for multilayer plain bearings

SANS 4382-1:2005/ISO 4382-1:1991, IDT, Ed. 2

1

Plain bearings - Copper alloys Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings

SANS 4382-2:2005/ISO 4382-2:1991, IDT, Ed. 2

1

Plain bearings - Copper alloys Part 2: Wrought copper alloys for solid plain bearings

SANS 4383:2005/ISO 4383:2000, IDT, Ed. 3

1

Plain bearings - Multilayer materials for thin-walled plain bearings

SANS 4384-1:2005/ISO 4384-1:2000, IDT, Ed. 2

1

Plain bearings - Hardness testing of bearing metals Part 1: Compound materials

SANS 4384-2:2005/ISO 4384-2:1982, IDT, Ed. 1

1

Plain bearings - Hardness testing of bearing metals Part 2: Solid materials

SANS 4385:2005/ISO 4385:1981, IDT, Ed. 1

1

Plain bearings - Compression testing of metallic bearing materials

SANS 4386-1:2005/ISO 4386-1:1992, IDT, Ed. 2

1

Plain bearings - Metallic multilayer plain bearings Part 1: Non-destructive ultrasonic testing of bond

SANS 4386-2:2005/ISO 4386-2:1982, IDT, Ed. 1

1

Plain bearings - Metallic multilayer plain bearings Part 2: Destructive testing of bond for bearing metal layer thicknesses >= 2mm

SANS 4386-3:2005/ISO 4386-3:1992, IDT, Ed. 1

1

Plain bearings - Metallic multilayer plain bearings Part 3: Non-destructive penetrant testing

SANS 4427:1996/ISO 4427:1996, IDT, Ed. 1 (SABS ISO 4427)

1

Polyethylene (PE) pipes for water supply Specifications

SANS 4427-1:2008/ISO 4427-1:2007, IDT, Ed. 1

1

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General

SANS 4427-2:2008/ISO 4427-2:2007, IDT, Ed. 1

1

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes

SANS 4427-3:2008/ISO 4427-3:2007, IDT, Ed. 1

1

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 3: Fittings

Page 108

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 4427-5:2008/ISO 4427-5:2007, IDT, Ed. 1

1

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system

SANS 4437:2008/ISO 4437:2007, IDT, Ed. 3

2

Buried polyethylene (PE) pipes for the supply of gaseous fuels - Metric series - Specifications

SANS 4516:2008/ISO 4516:2002, IDT, Ed. 2 (SABS ISO 4516)

2

Metallic and other inorganic coatings - Vickers and Knoop microhardness tests

SANS 4518:1980/ISO 4518:1980, IDT, Ed. 1

1

Metallic coatings - Measurement of coating thickness - Profilometric method

SANS 4519:1980/ISO 4519:1980, IDT, Ed. 1 (SABS ISO 4519)

1

Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes

SANS 4520:1981/ISO 4520:1981, IDT, Ed. 1

1

Chromate conversion coatings on electroplated zinc and cadmium coatings

SANS 4521:1985/ISO 4521:1985, IDT, Ed. 1 (SABS ISO 4521)

1

Metallic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes

SANS 4522-1:1985/ISO 4522-1:1985, IDT, Ed. 1

1

Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings Part 1: Determination of coating thickness

SANS 4522-2:1985/ISO 4522-2:1985, IDT, Ed. 1 (SABS ISO 4522-2)

1

Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings Part 2: Adhesion tests

SANS 4522-3:1988/ISO 4522-3:1988, IDT, Ed. 1

1

Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings Part 3: Determination of the presence of residual salts

SANS 4523:1985/ISO 4523:1985, IDT, Ed. 1 (SABS ISO 4523)

1

Metallic coatings - Electrodeposited gold and gold alloy coatings for engineering purposes

SANS 4524-1:1985/ISO 4524-1:1985, IDT, Ed. 1

1

Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings Part 1: Determination of coating thickness

SANS 4524-2:2007/ISO 4524-2:2000, IDT, Ed. 2 (SABS ISO 4524-2)

2

Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings Part 2: Mixed flowing gas (MFG) environmental tests

SANS 4524-3:1985/ISO 4524-3:1985, IDT, Ed. 1

1

Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings Part 3: Electrographic tests for porosity

SANS 4524-4:1985/ISO 4524-4:1985, IDT, Ed. 1 (SABS ISO 4524-4)

1

Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings Part 4: Determination of gold content

SANS 4524-5:1985/ISO 4524-5:1985, IDT, Ed. 1

1

Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings Part 5: Adhesion tests

SANS 4524-6:1988/ISO 4524-6:1988, IDT, Ed. 1 (SABS ISO 4524-6)

1

Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings Part 6: Determination of the presence of residual salts

SANS 4525:2007/ISO 4525:2003, IDT, Ed. 2

2

Metallic coatings - Electroplated coatings of nickel plus chromium on plastics materials

2

Metallic coatings - Electroplated coatings of nickel for engineering purposes

(SABS ISO 4437)

(SABS ISO 4518)

(SABS ISO 4520)

(SABS ISO 4522-1)

(SABS ISO 4522-3)

(SABS ISO 4524-1)

(SABS ISO 4524-3)

(SABS ISO 4524-5)

(SABS ISO 4525) SANS 4526:2007/ISO 4526:2004, IDT, Ed. 2 (SABS ISO 4526)

Page 109

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 4538:1978/ISO 4538:1978, IDT, Ed. 1 (SABS ISO 4538)

1

Metallic coatings - Thioacetamide corrosion test (TAA test)

SANS 4541:1978/ISO 4541:1978, IDT, Ed. 1

1

Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test)

SANS 4566:2008/ISO 4566:1992, IDT, Ed. 2

1

Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper

SANS 4586-1:1995/ISO 4586-1:1995, IDT

1

High-pressure decorative laminates - Sheets made from thermosetting resins Part 1: Classification and specifications

SANS 4586-2:1997/ISO 4586-2:1997, IDT, Ed. 4 (SABS ISO 4586-2)

1

High-pressure decorative laminates - Sheets made from thermosetting resins Part 2: Determination of properties

SANS 4591:2003/ISO 4591:1992, IDT, Ed. 2

1

Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

SANS 4593:2003/ISO 4593:1993, IDT, Ed. 2

1

Plastics - Film and sheeting - Determination of thickness by mechanical scanning

SANS 4624:2008/ISO 4624:2002, IDT, Ed. 2

1

Paints and varnishes - Pull-off test for adhesion

SANS 4628-1:2004/ISO 4628-1:2003, IDT, Ed. 3

2

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system

2

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering

2

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting

2

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking

2

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 5: Assessment of degree of flaking

2

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 6: Assessment of degree of chalking by tape method

SANS 4633:2008/ISO 4633:2002, IDT, Ed. 3

1

Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials

SANS 4635:2004/ISO 4635:1982, IDT, Ed. 1

1

Rubber, vulcanized - Preformed compression seals for use between concrete motorway paving sections - Specification for material

(SABS ISO 4541)

(SABS ISO 4586-1)

(SABS ISO 4628-1)

SANS 4628-2:2004/ISO 4628-2:2003, IDT, Ed. 2 (SABS ISO 4628-2)

SANS 4628-3:2004/ISO 4628-3:2003, IDT, Ed. 2 (SABS ISO 4628-3)

SANS 4628-4:2004/ISO 4628-4:2003, IDT, Ed. 2 (SABS ISO 4628-4)

SANS 4628-5:2004/ISO 4628-5:2003, IDT, Ed. 2 (SABS ISO 4628-5)

SANS 4628-6:2007/ISO 4628-6:2007, IDT, Ed. 2 (SABS ISO 4628-6)

Page 110

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 4642:2007/ISO 4642:1978, IDT, Ed. 1

1

Rubber products - Hoses, non-collapsible, for firefighting service

SANS 4649:2003/ISO 4649:2002, IDT, Ed. 2

1

Rubber - Vulcanized or thermoplastic Determination of abrasion resistance using a rotating cylindrical drum device

SANS 4661-2:2003/ISO 4661-2:1987, IDT, Ed. 1

1

Rubber, vulcanized - Preparation of samples and test pieces Part 2: Chemical tests

SANS 4662:2003/ISO 4662:1986, IDT, Ed. 2

1

Rubber - Determination of rebound resilience of vulcanizates

SANS 4663:2003/ISO 4663:1986, IDT, Ed. 3

1

Rubber - Determination of dynamic behaviour of vulcanizates at low frequencies - Torsion pendulum method

SANS 4664:2003/ISO 4664:1998, IDT, Ed. 3

1

Rubber - Guide to the determination of dynamic properties

SANS 4684:2010/ISO 4684:2005, IDT, Ed. 1

1

Leather - Chemical tests - Determination of volatile matter

SANS 4706:2009/ISO 4706:2008, IDT, Ed. 2

2

Gas cylinders - Refillable welded steel cylinders Test pressure 60 bar and below

SANS 4751:1984/ISO 4751:1984, IDT, Ed. 1 (SABS ISO 4751)

1

Copper and copper alloys - Determination of tin content - Spectrometric method

SANS 4778:1981/ISO 4778:1981, IDT, Ed. 1

1

Chain slings of welded construction - Grades M(4), S(6) and T(8)

SANS 4787:1984/ISO 4787:1984, IDT, Ed. 1 (SABS ISO 4787)

1

Laboratory glassware - Volumetric glassware Methods for use and testing of capacity

SANS 4788:1980/ISO 4788:1980, IDT, Ed. 1

1

Laboratory glassware - Graduated measuring cylinders

SANS 4788:2009/ISO 4788:2005, IDT, Ed. 2 (SABS ISO 4788)

2

Laboratory glassware - Graduated measuring cylinders

SANS 4800:1998/ISO 4800:1998, IDT, Ed. 2

2

Laboratory glassware - Separating funnels and dropping funnels

SANS 4831:2007/ISO 4831:2006, IDT, Ed. 3 (SABS ISO 4831)

2

Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of coliforms - Most probable number technique

SANS 4832:2007/ISO 4832:2006, IDT, Ed. 3 (SABS ISO 4832)

2

Microbiology of feed and animal feeding stuffs Horizontal method for the enumeration of coliforms Colony-count technique

SANS 4833:2007/ISO 4833:2003, IDT, Ed. 3

2

Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of microorganisms - Colony-count technique at 30 °C

SANS 4866:1990/ISO 4866:1990, IDT, Ed. 1 (SABS ISO 4866)

1

Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings

SANS 4892-2:2008/ISO 4892-2:2006, IDT, Ed. 2

1

Plastics - Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps

SANS 4918:1990/ISO/TR 4918:1990, IDT, Ed. 1 (SABS ISO/TR 4918)

1

Textile floor coverings - Determination of wear Castor chair test

(SABS ISO 4778)

(SABS ISO 4788)

(SABS ISO 4800)

(SABS ISO 4833)

Page 111

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 4919:1978/ISO 4919:1978, IDT, Ed. 1 (SABS ISO 4919)

1

Carpets - Determination of tuft withdrawal force

SANS 4921:2000/ISO 4921:2000, IDT, Ed. 2

2

Knitting - Basic concepts - Vocabulary

SANS 4928:2009/ISO 4928:2006, IDT, Ed. 3

2

Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a nonpetroleum base hydraulic brake fluid (Service temperature 120 °C max.)

SANS 4930:2009/ISO 4930:2006, IDT, Ed. 2

2

Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 °C max.)

SANS 4994:1987/BS 4994:1987, IDT

1

Design and construction of vessels and tanks in reinforced plastics

SANS 4998:2007/ISO 4998:2005, IDT, Ed. 4 (SABS ISO 4998)

2

Continuous hot-dip zinc-coated carbon steel sheet of structural quality

SANS 5001:1971

2

Sterility testing: sampling, criteria of compliance of a batch with sterility requirements

SANS 5002:1987 (SABS SM 2)

3

Sterility of liquids

SANS 5003:1987

3

Sterility of solid materials

SANS 5004:1987 (SABS SM 4)

3

Sterility of antibiotics and preparations containing antibiotics

SANS 5006:1992

4

Pyrogenicity of pharmaceutical products (derived from BP 1988)

SANS 5009:1987 (SABS SM 9)

4

Extractable volume of a pharmaceutical product in a container

SANS 5010:1975

3

Limit of alkalinity of glass containers for pharmaceutical products

SANS 5011:2005/ISO 10523:1994, IDT, Ed. 1

5

Water quality - Determination of pH

SANS 5014:1987

3

Heavy metals in pharmaceutical solutions, limit test

SANS 5018:1975 (SABS SM 18)

3

Dextrose content of solutions

SANS 5019:1975

3

Visible suspended matter and sediment in pharmaceutical products

SANS 5030:2006 (SABS SM 30)

3.01

Paints and varnishes - Panels for testing: Fibrecement panels

SANS 5037:2003

4

Paints and varnishes - Application by applicator blade

3

Paints and varnishes - Spraying properties of paints

(SABS ISO 4921)

(SABS BS 4994)

(SABS SM 1)

(SABS SM 3)

(SABS SM 6)

(SABS SM 10)

(SABS SM 14)

(SABS SM 19)

(SABS SM 37) SANS 5044:2005 (SABS SM 44)

Page 112

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5057:2007/ISO 5057:1993, IDT, Ed. 1

1

Industrial trucks - Inspection and repair of fork arms in service on fork-lift trucks

SANS 5063:1975

3

Potassium chloride content of solutions

SANS 5064:1975 (SABS SM 64)

3

Anticoagulant acid citrate dextrose solution, identification of

SANS 5067:1975

2

Citric acid content of pharmaceutical products

SANS 5071:2007 (SABS SM 71)

3

Fibre diameter of textile fibres - Projection microscope method

SANS 5072:2005/ISO 5072:1997, IDT, Ed. 1

1

Brown coals and lignites - Determination of true relative density and apparent relative density

SANS 5074:1994/ISO 5074:1994, IDT, Ed. 2 (SABS ISO 5074)

1

Hard coal - Determination of Hardgrove grindability index

SANS 5089:1977/ISO 5089:1977, IDT, Ed. 1

1

Textiles - Preparation of laboratory test samples and test specimens for chemical testing

SANS 5091:2007 (SABS SM 91)

4

Bow and skewness in woven textile fabrics

SANS 5099:2005

3

Water resistance of textile fabrics: Hydrostatic head test

SANS 5100:2005 (SABS SM 100)

3

Water resistance - Water-repellency of fabrics permeable to air (Bundesmann test)

SANS 5101:2004

3

Water resistance of textile fabrics: drop penetration test

SANS 5102:2004 (SABS SM 102)

3

Water resistance of textile fabrics: short period cone test

SANS 5113:2005

4

Non-fibrous material content of wool

SANS 5114:2006 (SABS SM 114)

5

Non-fibrous material content of textiles (method using starch-digesting enzymes)

SANS 5115:2005

4

Fluidity of cotton and certain cellulosic man-made fibres in cuprammonium solution (modified method)

SANS 5117:2005 (SABS SM 117)

2

Textiles - Formulae used in statistical analysis

SANS 5123:2005

3

Paints and varnishes - Apparent water absorption of paint films

SANS 5125:2007 (SABS SM 125)

3.01

Paints and varnishes - Determination of viscosity by means of an efflux cup

SANS 5126:2008

3

Viscosity of binders for paints

3

Paints and varnishes - General appearance of oils and clear varnishes

(SABS SM 63)

(SABS SM 67)

(SABS ISO 5089)

(SABS SM 99)

(SABS SM 101)

(SABS SM 113)

(SABS SM 115)

(SABS SM 123)

(SABS SM 126) SANS 5127:2006 (SABS SM 127)

Page 113

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5136:2005 (SABS SM 136)

3

Paints and varnishes - Resistance to sheen development of paint films

SANS 5137:2005

3

Paints and varnishes - Daylight 45°, 0° luminous directional reflectance of surface coatings and pigments

SANS 5142:2005 (SABS SM 142)

3

Paints and varnishes - Sanding properties of paint films

SANS 5146:2005

3

Paints and varnishes - Resistance to impact of paint films

SANS 5148:2003 (SABS SM 148)

4

Paints and varnishes - Determination of through-dry state and through-dry time

SANS 5151:1994/ISO 5151:1994, IDT, Ed. 1

1

Non-ducted air conditioners and heat pumps Testing and rating for performance

SANS 5153:2003 (SABS SM 153)

4

Paints and varnishes - Determination of viscosity by means of a Stormer viscometer

SANS 5160:2007

3.01

Paints and varnishes - Temperature stability

SANS 5167:2005 (SABS SM 167)

3

Paints and varnishes - Determination of resistance to cold water

SANS 5175:2003

4

Paints and varnishes - Determination of washability (brush method)

SANS 5176:2007 (SABS SM 176)

2.01

Textile fabrics: tearing strength of selvedges

SANS 5178:2006

2

Stretched width of mutton cloth

SANS 5182:1991/ISO 5182:1991, IDT, Ed. 2 (SABS ISO 5182)

1

Welding - Materials for resistance welding electrodes and ancillary equipment

SANS 5183-1:2008/ISO 5183-1:1998, IDT, Ed. 2

2

Resistance welding equipment - Electrode adaptors, male taper 1:10 Part 1: Conical fixing, taper 1:10

SANS 5183-2:2008/ISO 5183-2:2000, IDT, Ed. 2 (SABS ISO 5183-2)

2

Resistance spot welding - Electrode adaptors, male taper 1:10 Part 2: Parallel shank fixing for end-thrust electrodes

SANS 5184:1979/ISO 5184:1979, IDT, Ed. 1

1

Straight resistance spot welding electrodes

SANS 5185:2006 (SABS SM 185)

2

Total alkali content of soap powders or chips

SANS 5186:2006

2

Alkaline salt content of scouring compounds

SANS 5187:2006 (SABS SM 187)

2

Fatty matter content of soap products

SANS 5188:2006

2

Unsaponified plus unsaponifiable matter content of soap products

(SABS SM 137)

(SABS SM 146)

(SABS ISO 5151)

(SABS SM 160)

(SABS SM 175)

(SABS SM 178)

(SABS ISO 5183-1)

(SABS ISO 5184)

(SABS SM 186)

(SABS SM 188)

Page 114

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5189:2004 (SABS SM 189)

2.01

Alcohol-insoluble matter content of soap products

SANS 5190:2004

1.01

Water insoluble matter content of soap products

SANS 5197:2007 (SABS SM 197)

3

Water - Turbidity

SANS 5201:2010

3.02

Water - Cadmium content

SANS 5203:2010 (SABS SM 203)

3.02

Water - Copper content

SANS 5207:2010

3.02

Water - Iron content

SANS 5208:2010 (SABS SM 208)

3.02

Water - Lead content

SANS 5209:2010

3.02

Water - Manganese content

SANS 5210:2010 (SABS SM 210)

2.03

Water - Nitrate and nitrite content

SANS 5213:2005

2.02

Water - Dissolved solids content

SANS 5214:2010 (SABS SM 214)

3.02

Water - Zinc content

SANS 5217:2010

3.03

Water - Free and saline ammonia content

SANS 5218:2007 (SABS SM 218)

2

Water - Albuminoid ammonia content

SANS 5220:2010

2.02

Water - Oxygen absorption

SANS 5221:2007 (SABS SM 221)

4.03

Microbiological analysis of water - General test methods

SANS 5222:2004

1.01

Identification of rosin in fatty matter

SANS 5223:2006 (SABS SM 223)

2

Rosin content of fatty matter in soaps

SANS 5224:2006

2

Chloride content of soap products (potentiometric method)

SANS 5225:2006 (SABS SM 225)

2

Carbolic acid content of carbolic soap

SANS 5226:2006

2

Volatile matter content of scouring compounds

2

Titre of fatty matter in soaps

(SABS SM 190)

(SABS SM 201)

(SABS SM 207)

(SABS SM 209)

(SABS SM 213)

(SABS SM 217)

(SABS SM 220)

(SABS SM 222)

(SABS SM 224)

(SABS SM 226) SANS 5228:2006 (SABS SM 228)

Page 115

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5230:2006 (SABS SM 230)

2

Fineness of water-insoluble matter of scouring compounds

SANS 5231:2005

2.01

Soap powder or soap chips - Determination of fineness

SANS 5232:2006 (SABS SM 232)

4

Abrasive number of scouring compounds

SANS 5233:2007

3

Pesticides - Biological evaluation of the efficacy of mists and fogs

SANS 5235:2008 (SABS SM 235)

2

Standard test method for the determination of the diastatic power of malts prepared from sorghum including bird-proof varieties, and from millet

SANS 5236:2009

2

Bacteriostatic efficacy of water miscible liquids

SANS 5237:2005 (SABS SM 237)

2

Chlorine retention of fabrics: reduction in breaking strength method

SANS 5247:2007

4

Textiles - Nep count of cotton wool

SANS 5249:2006 (SABS SM 249)

2

Determination of the absorbency rate of absorbent cotton wool

SANS 5250:2006

3

Water-soluble matter content of textiles

SANS 5251:2006 (SABS SM 251)

2

Effect of heat on absorbent cotton wool

SANS 5252:2006

2

Determination of the presence of oxidizing substances in surgical dressings

SANS 5254:2003 (SABS SM 254)

2

Determination of the presence of alkalinity in surgical dressings

SANS 5255:2003

2

Determination of the presence of acidity in surgical dressings

SANS 5256:2005 (SABS SM 256)

3

Presence of dyes in absorbent cotton wool

SANS 5257:2005

4

Ash content of textile surgical dressings

SANS 5258:2004 (SABS SM 258)

3

Buoyancy of fibre fillers for life jackets

SANS 5259:2005

5

Test for buoyancy of life-jackets

SANS 5260:2004 (SABS SM 260)

3

Textiles - Yarns from packages - Determination of loop strength

SANS 5261:2009

3.01

Bactericidal efficacy of anti-bacterial liquid toilet soap

3

Snarling twist in textile yarns

(SABS SM 231)

(SABS SM 233)

(SABS SM 236)

(SABS SM 247)

(SABS SM 250)

(SABS SM 252)

(SABS SM 255)

(SABS SM 257)

(SABS SM 259)

(SABS SM 261) SANS 5262:2006 (SABS SM 262)

Page 116

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5263:2005 (SABS SM 263)

5

Water absorption rate of textile fabrics

SANS 5264:2006

4

Pile-to-ground length ratio of warp yarns in textile fabrics with uncut pile

SANS 5265:2007 (SABS SM 265)

3.01

Air permeability of textile fabrics

SANS 5266:2005

4

Water resistance of textile fabrics: Variable head test

SANS 5267:2005 (SABS SM 267)

3

Threads per centimetre in narrow woven textile fabrics

SANS 5270:2004

3

Turns per metre of final folding twist and twist variation of textile yarns

SANS 5272:2007 (SABS SM 272)

3

Non-fibrous material content of textiles Hydrochloric acid method

SANS 5274:2006

3

Alkali-solubility of flax materials

SANS 5275:2004 (SABS SM 275)

4

Wales and courses per unit length in knitted textile fabrics (counting glass method)

SANS 5276:2005

3

Non-fibrous material content of textiles (physical separation method)

SANS 5277:2009 (SABS SM 277)

4

Resistance to attack by Chaetomium globosum

SANS 5278:2005

4

Sewing stitches per unit length

SANS 5299:2008 (SABS SM 299)

3

Pesticides - Rearing and handling of the Mediterranean flour moth (Ephestia kuehniella Zeller)

SANS 5300:2005

4

Water repellency of textile fabrics (Spray test)

SANS 5301:2005 (SABS SM 301)

3

Splitting resistance of textile felts

SANS 5302:2009

3

Pesticides - Rearing and handling of the skin and hide beetle (Dermestes maculatus de Geer)

SANS 5311:2006 (SABS SM 311)

3

Length of textile shoe laces

SANS 5312:2005

2

Number of interlacing threads in a braid

SANS 5313:2005 (SABS SM 313)

3

Mass per 100 m of textile shoe laces

SANS 5314:2005

3

Plaits per centimetre in a textile braid

3

Colour-bleeding (in water) of textile shoe laces

(SABS SM 264)

(SABS SM 266)

(SABS SM 270)

(SABS SM 274)

(SABS SM 276)

(SABS SM 278)

(SABS SM 300)

(SABS SM 302)

(SABS SM 312)

(SABS SM 314) SANS 5315:2004 (SABS SM 315)

Page 117

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5316:2005 (SABS SM 316)

3

Abrasion resistance of textile shoe laces (without core) and similar articles

SANS 5322:2005

3

Feathers and down - Scouring test

SANS 5323:2008 (SABS SM 323)

3.01

Breaking strength of seams in textiles

SANS 5326:2007

3

Skein strength and tenacity, and linear density of spun textile yarns on packages

SANS 5328:2005 (SABS SM 328)

3

Tear resistance of textile felts

SANS 5330:2005

3

Mass per unit length of conditioned textile fabrics

SANS 5334:2008 (SABS SM 334)

5

Pesticides - Rearing and handling of the common housefly (Musca domestica (L.))

SANS 5369:2005

3

Dimensions of hosiery

SANS 5370:2005 (SABS SM 370)

3

Dimensional changes of hosiery during relaxation

SANS 5385:2005

3

Mass per unit area of conditioned knitted textiles

SANS 5398-1:2010/ISO 5398-1:2007, IDT, Ed. 1

1

Leather - Chemical determination of chromic oxide content Part 1: Quantification by titration

SANS 5398-2:2010/ISO 5398-2:2009, IDT, Ed. 1

1

Leather - Chemical determination of chromic oxide content Part 2: Quantification by colorimetric determination

SANS 5398-3:2010/ISO 5398-3:2007, IDT, Ed. 1

1

Leather - Chemical determination of chromic oxide content Part 3: Quantification by atomic absorption spectrometry

SANS 5398-4:2010/ISO 5398-4:2007, IDT, Ed. 1

1

Leather - Chemical determination of chromic oxide content Part 4: Quantification by inductively coupled plasma - optical emission spectrometer (ICP-OES)

SANS 5411:2005 (SABS SM 411)

3

Flex cracking of coated textile fabrics

SANS 5412:2005

3

Degree of blocking of coated textile fabrics

SANS 5413:2006 (SABS SM 413)

3

Water absorption of plastics filler foam for life jackets

SANS 5414:2007

3.01

Tensile strength and extension at break: modified (dumb-bell) strip method

SANS 5415:2005 (SABS SM 415)

3

Accelerated aging of coated textile fabrics

SANS 5417:2005

3

Density of foamed plastic fillers for life jackets

(SABS SM 322)

(SABS SM 326)

(SABS SM 330)

(SABS SM 369)

(SABS SM 385)

(SABS SM 412)

(SABS SM 414)

(SABS SM 417)

Page 118

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5418:2005 (SABS SM 418)

3

Dimensional changes of textile fabrics during steam pressing

SANS 5419:2009

3

Pesticides - Evaluation of rodentproofness of building materials and constructions

SANS 5420:2007 (SABS SM 420)

3.01

Gripping strength of tags on textile shoe laces

SANS 5421:2007

3.01

Slip resistance of textile shoe laces and similar articles

SANS 5422:2007 (SABS SM 422)

3

Pesticides - Biological evaluation of insecticidal sprays on compost (laboratory test)

SANS 5433:2010/ISO 5433:1999, IDT, Ed. 1

1

Leather - Bovine wet blue - Specification

SANS 5448:2006 (SABS SM 448)

3

Effect of heat on appearance and texture of textile fabrics

SANS 5449:2005

3

Dimensional changes of made-up textile articles

SANS 5450:2007 (SABS SM 450)

3.01

Colour fastness of buttons to washing

SANS 5451:2004

3

Colour fastness of buttons to dry cleaning

SANS 5452:2005 (SABS SM 452)

2

Method of obtaining test samples of cleaning waste

SANS 5457:2010

4

Pesticides - Rearing and handling of the American cockroach (Periplaneta americana (L.))

SANS 5458:2008 (SABS SM 458)

4

Pesticides - Rearing and handling of the German cockroach (Blatella germanica (L.))

SANS 5459:2008

4

Pesticides - Rearing and handling of the confused flour beetle (Tribolium confusum (Duv.))

SANS 5460:2008 (SABS SM 460)

4

Pesticides - Rearing and handling of the granary weevil (Sitophilus granarius (L.))

SANS 5461:2008

4

Pesticides - Rearing and handling of the rice weevil (Sitophilus oryzae (L.))

SANS 5462:2008 (SABS SM 462)

4

Pesticides - Rearing and handling of the yellow fever mosquito (Aedes aegypti (L.))

SANS 5464:2005

4

Paints and varnishes - Wet hiding power (brush-out method)

SANS 5469:2009 (SABS SM 469)

2

Soil burial

SANS 5471:2006

2.01

Pesticides - Biological evaluation of the resistance of materials to termite attack

2

Resistance to fungal attack by Aspergillus niger

(SABS SM 419)

(SABS SM 421)

(SABS SM 449)

(SABS SM 451)

(SABS SM 457)

(SABS SM 459)

(SABS SM 461)

(SABS SM 464)

(SABS SM 471) SANS 5472:2009 (SABS SM 472)

Page 119

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5483:2006/ISO 1833:1977, MOD (SABS SM 483)

2

Non-fibrous material content of textiles (petroleum ether and water extraction method)

SANS 5484:2009

3

Resistance to fungal attack by mixed fungi

SANS 5486:2007 (SABS SM 486)

3

Seam slippage

SANS 5488:2005

2

Width of ribbons and other narrow fabrics

SANS 5492:2007 (SABS SM 492)

3

Runnage of twines

SANS 5493:2008

4.01

Ball burst strength of textile fabrics

SANS 5502:2009 (SABS SM 502)

3

Burning test on cable dielectric and outer coverings

SANS 5506:2008

3.01

Tear resistance of rubber cable sheathing

SANS 5509:2009 (SABS SM 509)

2.01

Bactericidal efficacy of disinfectants: Kelsey Sykes test (modified)

SANS 5511:2008

3

Oil resistance of vehicle ignition cables

SANS 5513:2007 (SABS SM 513)

3

Dripping test on braided and impregnated heatresistant cables

SANS 5514:2007

3

Flexibility of braided and impregnated heat-resistant cables

SANS 5515:2007 (SABS SM 515)

3

Flexing test on flexible cords

SANS 5516:2007

4

Kink resistance of circular flexible cords

SANS 5526:2007 (SABS SM 526)

3

Dielectric resistance of electric cables

SANS 5529:2007

3

Power frequency electrical puncture test on ignition cables

SANS 5537:2005/ISO 5537:2004, IDT, Ed. 1

1

Dried milk - Determination of moisture content (Reference method)

SANS 5544:2008

3

Dimensions of aluminium and copper strip, sheet, rod, bar, tube, channel and angle

SANS 5548:1987 (SABS SM 548)

3

Sterility of syringes and needles

SANS 5550:2009

3

Potency of antibiotics - Microbiological agar diffusion method of assay (two-point technique)

2

Media and reagents for microbiological tests

(SABS SM 484)

(SABS SM 488)

(SABS SM 493)

(SABS SM 506)

(SABS SM 511)

(SABS SM 514)

(SABS SM 516)

(SABS SM 529)

(SABS SM 544)

(SABS SM 550) SANS 5553:2008 (SABS SM 553)

Page 120

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5557:2009 (SABS SM 557)

3

Bending tests (longitudinal, transverse and edgewise) on copper strip or sheet

SANS 5560:2005

3

Pigment volume concentration of paints with a nonaqueous solvent base

SANS 5566:1968 (SABS SM 566)

1

Determination of selenium in copper

SANS 5568:2010

4

Pesticides - Insecticidal oil-based space sprays in low and medium pressure aerosol dispensers Determination of internal pressure of filled dispensers

3

Pesticides: Insecticidal oil-based space sprays in low-pressurized dispensers: Determination of delivery rate

SANS 5570:2007 (SABS SM 570)

3

Pesticides - Insecticidal oil-based space sprays in low-pressurized dispensers - Determination of the combustibility (closed drum test)

SANS 5571:2007

3

Pesticides - Insecticidal oil-based space sprays in low-pressurized dispensers - Determination of nonvolatile content

SANS 5572:2007 (SABS SM 572)

3

Pesticides - Insecticidal oil-based space sprays in low-pressurized dispensers - Determination of crazing effect on organic glass (polyacrylate sheet)

SANS 5573:1970

2

Pesticides: insecticidal oil-based space sprays in low-pressurized dispensers: determination of staining effect on painted surfaces

SANS 5574:1970 (SABS SM 574)

2

Pesticides: Insecticidal oil-based space sprays in low-pressurized dispensers: determination of staining effect on multifibre test fabric

SANS 5575:2007

2

Pesticides - Testing of valves of filled insecticidal low-pressurized dispensers for clogging

SANS 5576:2003 (SABS SM 576)

4

Pesticides - Biological evaluation of the efficacy of insecticidal water-based and oil-based space sprays in low pressurized dispensers

SANS 5583:2004

3

Pesticides - Biological evaluation of the contact efficacy of liquid residual insecticides

SANS 5584:1970 (SABS SM 584)

1

Field trials of agricultural crops for pesticide residue analysis

SANS 5585:2003

2.01

Pesticides: Sieving of wettable powders

SANS 5591:1975 (SABS SM 591)

1

Preparation of samples and extracts used in testing plastics for medical use

SANS 5602:2006

2

Water-soluble size content of woven textile fabrics

SANS 5607:2005 (SABS SM 607)

3

Creepage (of woven textile fabrics)

SANS 5614:2009

3

Resistance to growth of Trichophyton interdigitale

(SABS SM 560)

(SABS SM 568)

SANS 5569:2003 (SABS SM 569)

(SABS SM 571)

(SABS SM 573)

(SABS SM 575)

(SABS SM 583)

(SABS SM 585)

(SABS SM 602)

(SABS SM 614)

Page 121

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5615:2010 (SABS SM 615)

2

Method for the sampling of footwear components and materials other than leather

SANS 5616:2001

3

Preparation of samples (leather, elastomeric material and other footwear materials)

SANS 5617:2001 (SABS SM 617)

2

Determination of water content in leather

SANS 5618:2001

3

Leather - Matter extractable by petroleum ether

SANS 5619:2001 (SABS SM 619)

3

Determination of water-soluble matter content in leather

SANS 5620:1972

2

Determination of sulphated ash content of watersolubles in leather

SANS 5621:2009 (SABS SM 621)

3

Determination of total ash content of leather

SANS 5624:1972

2

Determination of hide substance of leather

SANS 5625:1990 (SABS SM 625)

2

Leather - Determination of chromic oxide content

SANS 5626:1992

3

Leather and footwear components - pH value and difference figure of an aqueous extract

SANS 5627:1972 (SABS SM 627)

2

Determination of magnesium sulphate content of leather by complexometric titration

SANS 5628:1972

2

Determination of perspiration resistance of lining leather

SANS 5629:1993 (SABS SM 629)

3

Leather and fibreboard - Determination of apparent density

SANS 5630:1968

1

Determination of resistance to grain cracking of leather

SANS 5632:1968 (SABS SM 632)

1

Determination of dynamic waterproofness of sole leather

SANS 5633:1968

1

Determination of wet stitch tear strength (leather, leatherboard, fibreboard)

SANS 5634:1972 (SABS SM 634)

2

Determination of wet compressibility of leather and fibreboards

SANS 5635:1990

3

Shrinkage temperature of leather

SANS 5636:1972 (SABS SM 636)

2

Determination of (a) tensile strength, (b) percentage elongation caused by a specified force, (c) percentage elongation at break of leather

SANS 5637:2000

3

Determination of tearing strength

1

Determination of dynamic waterproofness of upper leather

(SABS SM 616)

(SABS SM 618)

(SABS SM 620)

(SABS SM 624)

(SABS SM 626)

(SABS SM 628)

(SABS SM 630)

(SABS SM 633)

(SABS SM 635)

(SABS SM 637) SANS 5638:1968 (SABS SM 638)

Page 122

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5639:1972 (SABS SM 639)

2

Determination of two-dimensional extension of leather

SANS 5640:1968

1

Determination of flex resistance (leather fibreboard and cellulose fibreboard inner soles)

SANS 5641:1972 (SABS SM 641)

2

Determination of wet and dry bursting strengths of stiffeners

SANS 5642:1972

2

Determination of water absorption of inner soles and inner-sole material

SANS 5644:1988 (SABS SM 644)

3

Accumulated impact strength of toe-puff materials and the degree of softening of toe-puffs

SANS 5645:1994

3

Safety footwear - Impact resistance

SANS 5646:1972 (SABS SM 646)

2

Determination of bond strength of rib attachment (stuck-on rib inner soles)

SANS 5647:1993

3

Leather, footwear upper and lining materials - Flex endurance

SANS 5648:1972 (SABS SM 648)

2

Identification of organic retanned matter in chrome retanned leather

SANS 5649:1972

2

Determination of density of elastomeric material

SANS 5650:1972 (SABS SM 650)

2

Determination of hardness of elastomeric material

SANS 5651:1989

2

Tensile strength, elongation at break, and tensile stress at specified elongation of elastomeric material (footwear)

SANS 5652:1972 (SABS SM 652)

2

Determination of split tear strength of elastomeric material

SANS 5653:1972

2

Determination of heat shrinkage of elastomeric material

SANS 5654:1972 (SABS SM 654)

2

Determination of compression set of elastomeric material

SANS 5655:1972

2

Determination of flammability of elastomeric material

SANS 5656:1972 (SABS SM 656)

2

Determination of swelling of elastomeric material in swelling liquids

SANS 5660:1968

1

Determination of adhesion of outer soles to upper material (stuck-on)

SANS 5661:1968 (SABS SM 661)

1

Determination of adhesion of upper leather to direct moulded rubber soling material

SANS 5662:1973

1

Determination of peeling load (outer soles to canvas uppers) on canvas shoes

1

Determination of adhesion between foxing and canvas uppers in canvas shoes

(SABS SM 640)

(SABS SM 642)

(SABS SM 645)

(SABS SM 647)

(SABS SM 649)

(SABS SM 651)

(SABS SM 653)

(SABS SM 655)

(SABS SM 660)

(SABS SM 662) SANS 5663:1973 (SABS SM 663)

Page 123

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5664:1994 (SABS SM 664)

2

Footwear materials - Abrasion resistance of elastomeric material

SANS 5665:2005

2

Resistance to creep of adhesive bonds

SANS 5666:1994 (SABS SM 666)

2

Footwear - Soling material - Cut growth resistance

SANS 5667-1:2008/ISO 5667-1:2006, IDT, Ed. 2

2

Water quality - Sampling Part 1: Guidance on the design of sampling programmes and sampling techniques

SANS 5667-2:1991/ISO 5667-2:1991, IDT, Ed. 2 (SABS ISO 5667-2)

1

Water quality - Sampling Part 2: Guidance on sampling techniques

SANS 5667-3:2006/ISO 5667-3:2003, IDT, Ed. 3

2

Water quality - Sampling Part 3: Guidance on the preservation and handling of water samples

SANS 5667-4:1987/ISO 5667-4:1987, IDT, Ed. 1 (SABS ISO 5667-4)

1

Water quality - Sampling Part 4: Guidance on sampling from lakes, natural and man-made

SANS 5667-5:2006/ISO 5667-5:2006, IDT, Ed. 2

2

Water quality - Sampling Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems

SANS 5667-6:2006/ISO 5667-6:2005, IDT, Ed. 2 (SABS ISO 5667-6)

2

Water quality - Sampling Part 6: Guidance on sampling of rivers and streams

SANS 5667-10:2007/ISO 5667-10:1992, IDT, Ed. 1

1

Water quality - Sampling Part 10: Guidance on sampling of waste waters

SANS 5667-11:1993/ISO 5667-11:1993, IDT (SABS ISO 5667-11)

1

Water quality - Sampling Part 11: Guidance on sampling of groundwaters

SANS 5667-13:2007/ISO 5667-13:1997, IDT, Ed. 1

1

Water quality - Sampling Part 13: Guidance on sampling of sludges from sewage and water treatment works

SANS 5667-14:2007/ISO 5667-14:1998, IDT, Ed. 1

1

Water quality - Sampling Part 14: Guidance on quality assurance of environmental water sampling and handling

SANS 5667-15:1999/ISO 5667-15:1999, IDT, Ed. 1

1

Water quality - Sampling Part 15: Guidance on preservation and handling of sludge and sediment samples

SANS 5667-18:2007/ISO 5667-18:2001, IDT, Ed. 1

1

Water quality - Sampling Part 18: Guidance on sampling of groundwater at contaminated sites

SANS 5668:1973

1

Measurement of set in lasting of leather with the dome plasticity apparatus

SANS 5669:1973 (SABS SM 669)

1

Measurement of distension and strength of grain of leather by the ball burst test

SANS 5670:1994

2

Leather and footwear materials - Water vapour permeability

SANS 5682:2006 (SABS SM 682)

2.01

Efficacy of algaecides

SANS 5683:2006

2.01

Determination of shade depth class

(SABS SM 665)

(SABS ISO 5667-1)

(SABS ISO 5667-3)

(SABS ISO 5667-5)

(SABS ISO 5667-15)

(SABS SM 668)

(SABS SM 670)

(SABS SM 683)

Page 124

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5686:2007 (SABS SM 686)

2

Pesticides - Aromatic plus heterocyclic fraction content and naphthenic plus paraffinic fraction content of insecticidal petroleum base oils

SANS 5687:2007

2

Pesticides - Oil content and emulsifier content of emulsifiable concentrates of insecticidal petroleum oils

SANS 5689:2002 (SABS SM 689)

3

Pesticides - Biological evaluation of knock-down and killing properties of liquid and aerosol formulations

SANS 5690:2003

3

Pesticides - Biological evaluation of the properties of solid fly baits

SANS 5693:2007 (SABS SM 693)

3

Pesticides - Biological evaluation of the efficacy of insecticide dusting powders

SANS 5694:2007

3

Pesticides - Biological testing of the efficacy of rodenticides

SANS 5695:1978 (SABS SM 695)

2

Pesticides: Biological evaluation of the efficacy of mosquito repellants

SANS 5696:1978

2

Pesticides: Biological evaluation of the efficacy of residual sprays against skin and hide beetles

SANS 5725-1:2009/ISO 5725-1:1994, IDT, Ed. 1

1

Accuracy (trueness and precision) of measurement methods and results Part 1: General principles and definitions

SANS 5725-2:2009/ISO 5725-2:1994, IDT, Ed. 1

1

Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

SANS 5725-3:2009/ISO 5725-3:1994, IDT, Ed. 1

1

Accuracy (trueness and precision) of measurement methods and results Part 3: Intermediate measures of the precision of a standard measurement method

SANS 5725-4:2009/ISO 5725-4:1994, IDT, Ed. 1

1

Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method

SANS 5725-5:2009/ISO 5725-5:1998, IDT, Ed. 1

1

Accuracy (trueness and precision) of measurement methods and results Part 5: Alternative methods for the determination of the precision of a standard measurement method

SANS 5725-6:2009/ISO 5725-6:1994, IDT, Ed. 1

1

Accuracy (trueness and precision) of measurement methods and results Part 6: Use in practice of accuracy values

SANS 5726:2007 (SABS SM 726)

3

Seaming properties of woven textile fabrics

SANS 5730:2009

2

Antibacterial efficacy of solid and semi-solid antiseptics

SANS 5732:2010 (SABS SM 732)

2

Tin content of tin and lead alloys

SANS 5748:2010

2.01

Specific surface of cement

2

Autoclave expansion of cement

(SABS SM 687)

(SABS SM 690)

(SABS SM 694)

(SABS SM 696)

(SABS SM 730)

(SABS SM 748) SANS 5754:2007 (SABS SM 754)

Page 125

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5761:2008 (SABS SM 761)

2

Examination for the presence of viable spores of mesophilic Clostridium organisms in foods

SANS 5762:2008

2

Examination for the presence of viable Bacillus anthracis in foods

2

Efficacy of cleaning plant, equipment and utensils: swab technique

SANS 5764:2005/ISO 5764 IDF 108:2002, IDT, Ed. 2 1

Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)

SANS 5766:2005 (SABS SM 766)

2

Measurement of girth and length extended dimensions of pantyhose

SANS 5768:2004

2

Preparation of steel substrates before the application of paints and related products - Test for the assessment of cleanliness of blast-cleaned steel surfaces - Photo-electric reflectance measurement

2

Preparation of steel substrates before the application of paints and related products - Test for the assessment of cleanliness of blast-cleaned steel surfaces - Freedom from certain soluble salts

SANS 5771:2005 (SABS SM 771)

2

Preparation of steel substrates before the application of paints and related products - Test for the assessment of cleanliness of blast-cleaned steel surfaces - Detection of residual millscale

SANS 5772:2004 (SABS SM 772)

2

Preparation of steel substrates before the application of paints and related products - Surface roughness characteristics of blast-cleaned steel surfaces - Profile of blast-cleaned surfaces determined by a micrometer profile gauge

SANS 5775:2004 (SABS SM 775)

2

Preparation of steel substrates before the application of paints and related products - Surface roughness characteristics of blast-cleaned steel surfaces - Profile of blast-cleaned surfaces determined by metallographic section

SANS 5778:2008

3.01

Redeposition index of laundry detergents

SANS 5779:2008 (SABS SM 779)

3.01

Fluorescent whitening agent content of laundry detergents

SANS 5780:2008

3

Chemical damage to cotton fibres by laundry detergents

SANS 5781:2006 (SABS SM 781)

3

Water-insoluble matter content of laundry detergents

SANS 5788:2008

2

Diameter of circular crockery

SANS 5789:2008 (SABS SM 789)

2

Capacity of cups

SANS 5790:2008

2

Impact strength of cups, saucers, and plates

2

Resistance of saucers and plates to chipping

(SABS SM 762) SANS 5763:2006 (SABS SM 763)

(SABS SM 768)

SANS 5770:2004 (SABS SM 770)

(SABS SM 778)

(SABS SM 780)

(SABS SM 788)

(SABS SM 790) SANS 5791:2008 (SABS SM 791)

Page 126

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5792:2008 (SABS SM 792)

2

Resistance of crockery to crazing

SANS 5793:2008

2

Resistance of crockery to thermal shock

SANS 5794:2008 (SABS SM 794)

2

Water absorption of crockery

SANS 5796:2008

2

Resistance of crockery decoration to detergents and alkalis

SANS 5797:2008 (SABS SM 797)

3

Metal release from glazed crockery (plain or decorated), and acid resistance of decoration

SANS 5806:2006

3

Foam height of laundry detergents

SANS 5807:1979 (SABS SM 807)

1

Pesticides: Test rooms, test conditions, test equipment, and test insects and their handling

SANS 5808:2003

1.01

Pesticides: General conditions and equipment for the rearing and handling of test insects

SANS 5809:2008 (SABS SM 809)

2

Pesticides - Rearing and handling of the tobacco beetle (Lasioderma serricorne Fabr.)

SANS 5811:2009

2

Pesticides - Rearing and handling of the lesser grain borer (Rhizopertha dominica F.)

SANS 5812:2008 (SABS SM 812)

2

Pesticides - Rearing and handling of the Pharaoh's ant (Monomorium pharaonis (L.))

SANS 5815:2009

2

Pesticides - Rearing and handling of the silver fish (Lepisma saccharina L.)

SANS 5817:2004 (SABS SM 817)

2.01

Timber-based board products - Squareness

SANS 5819:2009

2

Pesticides - Rearing and handling of the dried-fruit moth (Ephestia cautella Walker)

SANS 5821:1979/ISO 5821:1979, IDT, Ed. 1 (SABS ISO 5821)

1

Resistance spot welding electrode caps

SANS 5822:1988/ISO 5822:1988, IDT, Ed. 2

1

Spot welding equipment - Taper plug gauges and taper ring gauges

SANS 5823:1978 (SABS SM 823)

1

Pesticides: Biological evaluation of the efficacy of insecticides used on compost

SANS 5826:2004/ISO 5826:1999, IDT, Ed. 2

2

Resistance welding equipment - Transformers General specifications applicable to all transformers

SANS 5827:1983/ISO 5827:1983, IDT, Ed. 1 (SABS ISO 5827)

1

Spot welding - Electrode back-ups and clamps

SANS 5828:2004/ISO 5828:2001, IDT, Ed. 2

2

Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics

1

Resistance spot welding - Electrode adaptors, female taper 1:10

(SABS SM 793)

(SABS SM 796)

(SABS SM 806)

(SABS SM 808)

(SABS SM 811)

(SABS SM 815)

(SABS SM 819)

(SABS ISO 5822)

(SABS ISO 5826)

(SABS ISO 5828) SANS 5829:1984/ISO 5829:1984, IDT, Ed. 1 (SABS ISO 5829)

Page 127

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5830:1984/ISO 5830:1984, IDT, Ed. 1 (SABS ISO 5830)

1

Resistance spot welding - Male electrode caps

SANS 5831:2006

2

Presence of chlorides in aggregates

SANS 5832:2006 (SABS SM 832)

2

Organic impurities in fine aggregates (limit test)

SANS 5833:2006

2.01

Detection of sugar in fine aggregates

SANS 5834:2006 (SABS SM 834)

2.01

Soluble deleterious impurities in fine aggregates (limit test)

SANS 5835:2006

2.01

Estimation of the effect of fine aggregate on the water requirement of concrete

SANS 5836:2007 (SABS SM 836)

2.02

Effect of fine and coarse aggregate on the shrinkage and expansion of cement: aggregate mixes (mortar prism method)

SANS 5837:2008

2.02

Low density materials content of aggregates

SANS 5838:2006 (SABS SM 838)

2

Sand equivalent value of fine aggregates

SANS 5839:2008

2.02

Soundness of aggregates (magnesium sulfate method)

SANS 5840:2008 (SABS SM 840)

2.02

Shell content of fine aggregate

SANS 5841:2008

2.01

Aggregate crushing value of coarse aggregates

SANS 5842:2006 (SABS SM 842)

2.01

FACT value (10% fines aggregate crushing value) of coarse aggregates

SANS 5843:2008

2.02

Water absorption of aggregates

SANS 5844:2006 (SABS SM 844)

2.01

Particle and relative densities of aggregates

SANS 5845:2006

2.01

Bulk densities and voids content of aggregates

SANS 5846:2006 (SABS SM 846)

2

Abrasion resistance of coarse aggregates (Los Angeles machine method)

SANS 5847:2008

2.02

Flakiness index of coarse aggregates

SANS 5848:2008 (SABS SM 848)

2.02

Polished-stone value of aggregates

SANS 5849:2008

2.02

Total water-soluble salts content of fines in aggregates

2

Sulfates content of fines in aggregates Part 1: Water-soluble sulfates in fines in aggregates

(SABS SM 831)

(SABS SM 833)

(SABS SM 835)

(SABS SM 837)

(SABS SM 839)

(SABS SM 841)

(SABS SM 843)

(SABS SM 845)

(SABS SM 847)

(SABS SM 849) SANS 5850-1:1998 (SABS SM 850-1)

Page 128

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5850-2:2008 (SABS SM 850-2)

1.03

Sulfates content of fines in aggregates Part 2: Acidsoluble sulfates in fines in aggregates

SANS 5851:2002

1.01

Liquid limit of fines in aggregates for base-courses

SANS 5852:2008 (SABS SM 852)

2

Plastic limit and plasticity index of fines in aggregates for base-courses

SANS 5853:2008

2

Linear shrinkage of fines in aggregates for basecourses

SANS 5854:2006 (SABS SM 854)

2

pH Value of fines in aggregates for base-courses

SANS 5855:2008

2

Free water content of aggregates

SANS 5856:2006 (SABS SM 856)

2

Bulking of fine aggregates

SANS 5858:2007

2

Pesticides - Biological evaluation of mosquito larvicides in artificially created mosquito breeding places

SANS 5859:2003 (SABS SM 859)

3

Pesticides - Biological efficacy of soil insecticides

SANS 5860:2006

1.01

Concrete tests - Dimensions, tolerances and uses of cast test specimens

SANS 5861-1:2006 (SABS SM 861-1)

2.01

Concrete tests - Mixing fresh concrete in the laboratory

SANS 5861-2:2006

2.01

Concrete tests - Sampling of freshly mixed concrete

SANS 5861-3:2006 (SABS SM 861-3)

2.01

Concrete tests - Making and curing of test specimens

SANS 5862-1:2006

2.01

Concrete tests - Consistence of freshly mixed concrete - Slump test

SANS 5862-2:2006 (SABS SM 862-2)

2.01

Concrete tests - Consistence of freshly mixed concrete - Flow test

SANS 5862-3:2006

2.01

Concrete tests - Consistence of freshly mixed concrete - Vebe test

SANS 5862-4:2006 (SABS SM 862-4)

2.01

Concrete tests - Consistence of freshly mixed concrete - Compacting factor and compaction index

SANS 5863:2006

2.01

Concrete tests - Compressive strength of hardened concrete

SANS 5864:2006 (SABS SM 864)

2.01

Concrete tests - Flexural strength of hardened concrete

SANS 5865:1994

2

Concrete tests - The drilling, preparation, and testing for compressive strength of cores taken from hardened concrete

(SABS SM 851)

(SABS SM 853)

(SABS SM 855)

(SABS SM 858)

(SABS SM 860)

(SABS SM 861-2)

(SABS SM 862-1)

(SABS SM 862-3)

(SABS SM 863)

(SABS SM 865)

Page 129

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5867:2008 (SABS SM 867)

2

Preparation of samples of vulcanized rubbers for testing

SANS 5868:2008

2

Conditioning of vulcanized rubbers

SANS 5869:2008 (SABS SM 869)

2

Accelerated aging of vulcanized rubbers (Air-oven method)

SANS 5870:2008

2

Hardness of vulcanized rubbers of hardness 30-95 IRH degrees

SANS 5872:2008 (SABS SM 872)

2

Compression set of vulcanized rubbers under constant deflection

SANS 5873:2008

2

Tear strength of vulcanized rubbers

SANS 5875:2008 (SABS SM 875)

2

Water absorption of vulcanized rubbers

SANS 5876:2008

2

Ozone resistance of vulcanized rubbers (RAPRAHampden method)

SANS 5880:2008 (SABS SM 880)

2

Electrical resistance of vulcanized rubbers

SANS 5883:2008

2

Resistance of vulcanized rubbers to swelling (volumetric method)

SANS 5884:1977 (SABS SM 884)

1

Scuff damage by impact on leather

SANS 5885:1977

1

Assessment of scuff damage to leather (viewing box method)

SANS 5886:1979 (SABS SM 886)

1

Degree of haemolysis in buffered systems

SANS 5889:2007

2

Pesticides - Biological evaluation of materials containing insecticide(s) having a fumigant action

SANS 5891:2003 (SABS SM 891)

2

Pesticides - Flammability of aerosols (flame projection test)

SANS 5893:2003/ISO 5893:2002, IDT, Ed. 3

1

Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification

SANS 5908:1979 (SABS SM 908)

1

Pyrometric cone equivalent (refractoriness) of refractory bricks and materials

SANS 5910:1979

1

Creep of refractory bricks in compression

SANS 5924:2009 (SABS SM 924)

2

Moisture content of coal samples intended for general analysis (vacuum-oven method)

SANS 5925:2007

2

Moisture content of coal samples intended for general analysis (air-oven method)

2

Carbon dioxide content of coal (titrimetric method)

(SABS SM 868)

(SABS SM 870)

(SABS SM 873)

(SABS SM 876)

(SABS SM 883)

(SABS SM 885)

(SABS SM 889)

(SABS SM 910)

(SABS SM 925) SANS 5941:2009 (SABS SM 941)

Page 130

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5943:2005/ISO 5943:2004, IDT, Ed. 3

1

Cheese and processed cheese products Determination of chloride content - Potentiometric titration method

SANS 5949:2005/ISO 5949:1983, IDT, Ed. 1

1

Tool steels and bearing steels - Micrographic method for assessing the distribution of carbides using reference photomicrographs

SANS 5956:2007 (SABS SM 956)

3

Acid gas evolved during combustion of cable materials

SANS 5957:1978

1

Pesticides: Organoleptic evaluation of the taste of pesticide-treated grain

SANS 5962:1982 (SABS SM 962)

1

Determination of wet split tear strength of inner sole and runner materials (other than leather)

SANS 5963:2006/ISO 5963:1985, IDT, Ed. 1

1

Documentation - Methods for examining documents, determining their subjects, and selecting indexing terms

SANS 5964:2005/ISO 5964:1985, IDT, Ed. 1

1

Documentation - Guidelines for the establishment and development of multilingual thesauri

SANS 5965:2006

2

Non-fibrous material content of textiles (alkali hydrolysis method)

SANS 5966:2007 (SABS SM 966)

3.01

Removable non-fibrous material content of textiles (scouring method)

SANS 5967:2008

2.01

Retention of preservative in timber (volume method)

SANS 5969:2004 (SABS SM 969)

1.01

Flatness of wooden board products

SANS 5970:2004

1.01

Edge straightness of wooden board products

SANS 5973:2009 (SABS SM 973)

1.01

Average adhesive bond quality of plywood and composite boards (knife test)

SANS 5976:2005

2

Heat-cool stability of wax polishes

SANS 5977:2008 (SABS SM 977)

2

Penetration of wax (paste) polishes

SANS 5978:2008

2

Performance of wax polishes

SANS 5980:2007 (SABS SM 980)

2

Softening point of the non-volatile matter of wax polishes

SANS 5981:2008

3

Wax polishes - Non-volatile matter content and the ash content of non-volatile matter

SANS 5982:2006 (SABS SM 982)

2

Water content of solvent-based wax polishes

SANS 5983:2008

3

Preparation of test specimens for moisture content determination in timber and timber products

(SABS SM 957)

(SABS SM 965)

(SABS SM 967)

(SABS SM 970)

(SABS SM 976)

(SABS SM 978)

(SABS SM 981)

(SABS SM 983)

Page 131

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 5984:2004 (SABS SM 984)

2.01

Moisture content of timber and timber products (oven dry method)

SANS 5985:2004

1.01

Moisture content of timber (extraction method)

SANS 5986:2004 (SABS SM 986)

1.01

Moisture content of timber (electric moisture-meter method)

SANS 5987:2007

2.01

Depth of penetration of preservative and detection and depth of sapwood in timber

SANS 5988:2004 (SABS SM 988)

1.01

Retention of preservative in timber (sample method)

SANS 5989:2004

1.01

Retention of preservative in timber (weighbridge method)

SANS 5990:2004 (SABS SM 990)

1.01

Water repellency (short-term) of preservative-treated timber

SANS 5991:2004

1.01

Guidelines for the spray-testing of timber specimens

SANS 5992:2004 (SABS SM 992)

1.01

Copper detection in timber

SANS 5993:2004

1.01

Chromium detection in timber

SANS 5994:2004 (SABS SM 994)

1.01

Arsenic detection in timber

SANS 5996:2004

1.01

Tin detection in timber

SANS 5997:2004 (SABS SM 997)

1.01

Zinc detection in timber

SANS 5999:2004

1.01

Heartwood detection in timber of the Pinus species

SANS 6000:2004 (SABS SM 1000)

1.01

Heartwood detection in timber of the Eucalyptus species

SANS 6001:2004

2

Colour fastness of textile curtaining to water-wicking

SANS 6002:2004 (SABS SM 1002)

2

Colour fastness of textile floor coverings to shampooing

SANS 6004:2005

2

Mass of total pile yarn per unit area of tufted textile floor coverings

SANS 6005:2005 (SABS SM 1005)

2

Mass per unit area of effective pile above the substrate of textile floor coverings

SANS 6007:2006

2

Balance of twist of textile threads

3

Assessment of the tendency of apparel fabrics to snag (mace tester method)

(SABS SM 985)

(SABS SM 987)

(SABS SM 989)

(SABS SM 991)

(SABS SM 993)

(SABS SM 996)

(SABS SM 999)

(SABS SM 1001)

(SABS SM 1004)

(SABS SM 1007) SANS 6008:2005 (SABS SM 1008)

Page 132

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6009:2005 (SABS SM 1009)

3

Abrasion resistance of textile fabrics (Martindale test)

SANS 6011:2009

1.02

Cutting and marking of test specimens of particle boards

SANS 6012:2004 (SABS SM 1012)

1.01

Thickness swelling and water absorption of fibreboards on immersion in water

SANS 6013:2004

1.01

Dimensional and mass stability of particle boards with varying humidity

SANS 6015:2004 (SABS SM 1015)

1.01

Modulus of elasticity and modulus of rupture in static bending of fibreboards

SANS 6016:2005

1.01

Transverse tensile (internal bond) strength of woodbased panels

SANS 6018:2005 (SABS SM 1018)

1.01

Screw-holding strength of wood-based panels

SANS 6019:2004

1.01

Surface bond strength of particle boards

SANS 6025:1984 (SABS SM 1025)

1

Vinyl chloride monomer content of polyvinyl chloride plastics for medical use

SANS 6026:2005

2

Dry-cleaning pretreatment of textile fabrics

SANS 6027:2007 (SABS SM 1027)

2

Calibration of the BCIRA X-type viscometer

SANS 6028:2007

2

Fluidity of cotton and certain cellulosic man-made fibres in cuprammonium solution (basic method)

SANS 6030:2005 (SABS SM 1030)

1.01

Gap-joint test pieces for testing wood adhesives

SANS 6032:2005

1.01

Accelerated degradation of adhesive bonds in wood

SANS 6033:2006 (SABS SM 1033)

2

Wood failure percentage in an adhesive joint

SANS 6034:2005

1.01

pH Value of wood adhesives

SANS 6035:2005 (SABS SM 1035)

1.01

Apparent dynamic viscosity of wood adhesives

SANS 6036:2005

1.01

Total solids content (non-volatile matter) of wood adhesives

SANS 6042:2005 (SABS SM 1042)

1.01

Resistance of aqueous wood adhesive dispersions to freezing and thawing

SANS 6044:2006

2

Shear strength in compression of wood adhesive bonds - Block shear test

1.01

Detection of thermoplasticity in wood adhesives: Creep test

(SABS SM 1011)

(SABS SM 1013)

(SABS SM 1016)

(SABS SM 1019)

(SABS SM 1026)

(SABS SM 1028)

(SABS SM 1032)

(SABS SM 1034)

(SABS SM 1036)

(SABS SM 1044) SANS 6046:2005 (SABS SM 1046)

Page 133

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6047:2007 (SABS SM 1047)

2

Water - Dissolved oxygen content

SANS 6048:2010

2.02

Water - Chemical oxygen demand

SANS 6049:2010 (SABS SM 1049)

2.02

Water - Suspended solids content

SANS 6050:2010

2.02

Water - Sodium content

SANS 6051:2007 (SABS SM 1051)

2

Water - Oil and grease content

SANS 6053:2007

2

Water - Boron content

SANS 6054:2010 (SABS SM 1054)

2.02

Water - Chromium content

SANS 6055:2006

2

Water - Orthophosphate content

SANS 6056:2007 (SABS SM 1056)

2

Water - Sulfide content

SANS 6059:2010

2.01

Water - Mercury content

SANS 6060:2005 (SABS SM 1060)

2

Analysis of plumage fillings (hand-sorting method)

SANS 6061:2007

3.01

CCA salts equivalent mass concentration of aqueous solutions that contain mixtures of copperchromium-arsenic compounds used for timber preservation

2

Coking properties of coal (Ruhr dilatometer test)

SANS 6073:1984 (SABS SM 1073)

1

Yields of tar, water, gas, and coke residue from coal by low temperature distillation

SANS 6075:1983

1

Total ash content (PVC upper, outer sole and heel materials)

SANS 6076:1983 (SABS SM 1076)

1

Ether-soluble matter content (PVC upper, outer sole and heel materials)

SANS 6077:2006

2

Fire test for valves and other assemblies used in fire-hazardous situations

SANS 6080:1994 (SABS SM 1080)

2

Leather and other footwear materials - Resistance to to-and-fro rubbing

SANS 6081:2008

3

Cleaning efficiency of low-foam laundry detergents

3

Cleaning efficiency of high-foam laundry detergents

(SABS SM 1048)

(SABS SM 1050)

(SABS SM 1053)

(SABS SM 1055)

(SABS SM 1059)

(SABS SM 1061)

SANS 6072:2009 (SABS SM 1072)

(SABS SM 1075)

(SABS SM 1077)

(SABS SM 1081) SANS 6082:2008 (SABS SM 1082)

Page 134

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6083:2004 (SABS SM 1083)

1.01

Modulus of elasticity and modulus of rupture in static bending of solid timber and glued laminated timber in structural sizes

SANS 6084:2004

2

Colour fastness of textiles to light: Mercury vapour lamp method

SANS 6085:2006 (SABS SM 1085)

2.02

Concrete tests - Initial drying shrinkage and wetting expansion of concrete

SANS 6094:2009

2

Stock remedies - Efficacy of chemicals against tick larvae

SANS 6095:2009 (SABS SM 1095)

2

Stock remedies - Efficacy of chemicals against adult ticks

SANS 6096:2009

2

Stock remedies - Efficacy confirmation of tickicides on cattle

SANS 6097:2009 (SABS SM 1097)

2

Stock remedies - Stripping rate of cattle tickicides in spray races

SANS 6098:2009

2

Stock remedies - Stability of cattle tickicides in plunge-dipping tanks

SANS 6100:2007 (SABS SM 1100)

3

Aerial bundled conductors - Performance of supporting cores under mechanical and thermal stresses

SANS 6101:2007

2

Adherence of dielectric to conductor of supporting cores of aerial bundled conductors

SANS 6103:2007 (SABS SM 1103)

2

Linear density of yarns in weft-knitted fabrics

SANS 6104:2007

2

Stitch length of weft-knitted fabrics

SANS 6105:2007 (SABS SM 1105)

2

Surface burning properties of textile fabric with a raised fibre surface

SANS 6106:2005

2

Wales and courses per unit length in knitted textile fabrics (graduated rule method)

SANS 6107:2005 (SABS SM 1107)

2

Wales and courses per unit length in knitted textile fabrics (Traversing thread counter method)

SANS 6109:1988

1

Volume of gas in a cartridge

SANS 6110:1988 (SABS SM 1110)

1

Accumulated impact strength of ladies' shoe heels of height greater than 25 mm

SANS 6111:1988

1

Accumulated impact strength of steel shanks

SANS 6112:1988 (SABS SM 1112)

1

Bending modulus of steel shanks for footwear

SANS 6113:1988

1

Resilience of steel shanks for footwear

(SABS SM 1084)

(SABS SM 1094)

(SABS SM 1096)

(SABS SM 1098)

(SABS SM 1101)

(SABS SM 1104)

(SABS SM 1106)

(SABS SM 1109)

(SABS SM 1111)

(SABS SM 1113)

Page 135

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6114:2007 (SABS SM 1114)

2

Resistance to actinic degradation of woven curtain and drape fabrics

SANS 6115:2007

2

Resistance to actinic degradation of knitted curtain and drape fabrics

SANS 6116:2005 (SABS SM 1116)

2

Resistance of textile fabrics to pilling and fuzzing (Random tumble method)

SANS 6117:1988

1

Moisture stability of insole boards and shank boards for footwear

SANS 6118:1988 (SABS SM 1118)

1

Spigot holding strength of ladies' plastics moulded heel top-pieces

SANS 6119:1988

1

The water-soluble chloride content of material for thermal insulation

SANS 6120:2005 (SABS SM 1120)

2

Wales and courses per unit length in knitted textile fabrics (fixed aperture method)

SANS 6121:2004

1.01

Bond quality of laminated timber products (Glulam) Chisel test

SANS 6122:2008 (SABS SM 1122)

2.01

Qualification testing of solid structural timber and laminated structural timber (glulam) for verifying timber grading systems in accordance to a given standard

SANS 6123:2004 (SABS SM 1123)

2.01

Wooden doors - Determination of stiffness

SANS 6124:2004

2.02

Wooden doors - Determination of resistance to torsion

SANS 6125:2004 (SABS SM 1125)

1.01

Resistance of wooden doors to hard body impact

SANS 6126:2004

1.01

Resistance of wooden doors to soft body impact

SANS 6128:2004 (SABS SM 1128)

1.01

Resistance of wooden doors to slamming

SANS 6129:2004

2.01

Wooden doors - Class 2 - Determination of resistance to weathering

SANS 6130:2006 (SABS SM 1130)

2

Dimensional changes and skewness of textile fabrics on exposure to heat

SANS 6131:1988

1

Pull-off strength of ladies' shoe heels

SANS 6132:1989 (SABS SM 1132)

1

Wet stitch tear strength of leather welting

SANS 6133:2007

2

Enumeration of sulfate-reducing bacteria - Most probable number (MPN) technique

1

Fatigue bending of granulated cork bottom filler for footwear

(SABS SM 1115)

(SABS SM 1117)

(SABS SM 1119)

(SABS SM 1121)

(SABS SM 1124)

(SABS SM 1126)

(SABS SM 1129)

(SABS SM 1131)

(SABS SM 1133) SANS 6134:1989 (SABS SM 1134)

Page 136

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6135:1989 (SABS SM 1135)

1

Heat insulation of granulated cork bottom filler for footwear

SANS 6136:2003

2

Pesticides - Biological evaluation of materials that release an insecticide upon heating

SANS 6138:2007/IEC 60332-1:1979, MOD (SABS SM 1138)

2

Resistance of cables and cords to flame propagation - Single vertical insulated cable or cord

SANS 6141:2007

2

Permitted explosives: Gallery test

SANS 6142:2006 (SABS SM 1142)

2

Permitted explosives: Continuity of detonation

SANS 6146:2006

2

Permitted explosives: Water resistance

SANS 6147:2006 (SABS SM 1147)

2

Permitted explosives: Gap sensitivity

SANS 6148:2006

2

Permitted explosives: Low temperature sensitivity

SANS 6149:2006 (SABS SM 1149)

2

Permitted explosives: Density

SANS 6150:2010

2.01

Verification of compression testing machines for concrete: Calibration of load scale

SANS 6151:2005 (SABS SM 1151)

2

Free water content of Portland cement extenders

SANS 6152:2010

2

Available alkali content of cement extenders (complying with SANS 50197-1)

SANS 6154:2006 (SABS SM 1154)

2

Glass content of granulated metallurgical slag (transmitted-light microscopy method)

SANS 6155:2006

2

Effect of extenders, used with cement, on the reduction of expansion caused by alkali-silica reaction (accelerated mortar prism method)

SANS 6156:2009 (SABS SM 1156)

2.01

Water requirement of portland cement extenders

SANS 6157:2007

2

Fineness of cement extenders (45 µm sieve method)

SANS 6158:2007/ISO 6158:2004, IDT, Ed. 2 (SABS ISO 6158)

2

Metallic coatings - Electrodeposited coatings of chromium for engineering purposes

SANS 6160:2005

1.01

Electrical resistance of floors

SANS 6161:2005 (SABS SM 1161)

2

Non-recoverable extension of textile floor coverings as imposed by mechanical action

SANS 6163:2006

2

Water-vapour transfer through a textile fabric

(SABS SM 1136)

(SABS SM 1141)

(SABS SM 1146)

(SABS SM 1148)

(SABS SM 1150)

(SABS SM 1152)

(SABS SM 1155)

(SABS SM 1157)

(SABS SM 1160)

(SABS SM 1163)

Page 137

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6164:2009 (SABS SM 1164)

1.01

Determination of lead (inorganic and tetra-alkyl) in workplace air by atomic absorption spectrophotometry

SANS 6168:2010

1.02

Water - Pretreatment for metal analysis

SANS 6169:2010 (SABS SM 1169)

1.02

Water - Aluminium content

SANS 6170:2010

1.02

Water - Cobalt content

SANS 6171:2010 (SABS SM 1171)

1.02

Water - Nickel content

SANS 6172:2003

1.02

Fire extinguishers - Assessment of fire rating

SANS 6173:2004 (SABS SM 1173)

1.01

Fibreboard - Preparation of test specimens

SANS 6174:2004

1.01

Fibreboard - Measurement of dimensions of test specimens

SANS 6175:2004 (SABS SM 1175)

1.01

Fibreboard - Determination of density

SANS 6176:2004

1.01

Fibreboard - Determination of linear expansion as a result of water absorption

SANS 6177:2004 (SABS SM 1177)

1.01

Insulation board - Determination of bitumen content

SANS 6178:2004

1.01

Fibreboard - Determination of lateral nail-holding strength

SANS 6179:2004 (SABS SM 1179)

1.01

Coated fibreboard - Determination of resistance of coating to scraping

SANS 6180:2004

1.01

Coated fibreboard - Determination of resistance to staining

SANS 6181:2004 (SABS SM 1181)

1.01

Coated fibreboard - Determination of resistance to steam

SANS 6182:2004

1.01

Wooden doors - Class 1 - Determination of resistance to weathering

SANS 6183:2006 (SABS SM 1183)

1.01

Pesticides - Sieving of tablets and pellets

SANS 6188:2005

3

Textile floor coverings - Loss of thickness after brief, moderate static loading

SANS 6192:2006 (SABS SM 1192)

1.01

Corrugated fibre board - Determination of ply adhesion

SANS 6193:2006

1.01

Corrugated fibre board - Determination of thickness

2.01

Slippage resistance of yarns at standard seams in fabrics

(SABS SM 1168)

(SABS SM 1170)

(SABS SM 1172)

(SABS SM 1174)

(SABS SM 1176)

(SABS SM 1178)

(SABS SM 1180)

(SABS SM 1182)

(SABS SM 1188)

(SABS SM 1193) SANS 6194:2007 (SABS SM 1194)

Page 138

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6195:2006 (SABS SM 1195)

1.01

Examination for the presence of viable Shigella organisms in foods

SANS 6196:2006

1.01

Examination for the presence of viable pathogenic Vibrio organisms in foods

SANS 6204:2007 (SABS SM 1204)

2

Heat resistance of cables and flexible cords

SANS 6205:2007

2

Extensibility test for extensible leads

SANS 6206:2007 (SABS SM 1206)

2

Wear resistance of braided and unkinkable cords

SANS 6207:2007

2

Bending test for highly flexible cords such as tinsel cords

SANS 6208:2007 (SABS SM 1208)

2

Extension test for extensible leads

SANS 6210:2009

2

Domestic solar water heaters - Mechanical qualification tests

SANS 6211-1:2003

1

Domestic solar water heaters Part 1: Thermal performance using an outdoor test method

SANS 6211-2:2003

1

Domestic solar water heaters Part 2: Thermal performance using an indoor test method

SANS 6215:1993 (SABS SM 1215)

1

Abrasion resistance of footwear materials (Martindale)

SANS 6216:1993

1

Adhesion in peel of sealant

SANS 6219:2007 (SABS SM 1219)

2

Permitted electric detonators: Incendivity (Gallery test)

SANS 6223:2010

1.03

The Izod impact test for metallic materials

SANS 6224:1994 (SABS SM 1224)

1

Footwear - Electrical resistance properties

SANS 6225:1994

1

Safety footwear - Penetration resistance

SANS 6226:1994 (SABS SM 1226)

1

Footwear - Compression resistance

SANS 6227:1994

1

Footwear - Outsole bond strength

SANS 6228:1994 (SABS SM 1228)

1

Footwear materials - Water vapour coefficient

SANS 6229:1994

1

Footwear materials - Water vapour absorption

1

Footwear - Corrosion resistance (metallic components)

(SABS SM 1196)

(SABS SM 1205)

(SABS SM 1207)

(SABS SM 1210)

(SABS SM 1216)

(SABS SM 1223)

(SABS SM 1225)

(SABS SM 1227)

(SABS SM 1229) SANS 6230:1994 (SABS SM 1230)

Page 139

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6231:1994 (SABS SM 1231)

1

Footwear materials - Absorption and desorption of water

SANS 6232:1994

1

Safety footwear - Penetration-resistant inserts Flexing resistance

SANS 6234:2006 (SABS SM 1234)

1.01

Pesticides - Spontaneous ignition properties of solid fumigants

SANS 6235:1994

1

Footwear - Elastomeric material - Resistance to fuel oil

SANS 6236:1994 (SABS SM 1236)

1

Footwear - Soling material - Hot contact resistance

SANS 6237:1994

1

Footwear - Inserts - Penetration resistance

SANS 6238:2007 (SABS SM 1238)

1.01

Retention of boron in timber (analytical method)

SANS 6239:2006

2

Aggregate impact value of coarse aggregate

SANS 6240:2008 (SABS SM 1240)

1.02

Electric conductivity of fine aggregate

SANS 6241:2006

1.01

Particle size distribution of material of diameter smaller than 75 µm in fine aggregate (hydrometer method)

SANS 6242:2008 (SABS SM 1242)

1.02

Acid insolubility of aggregates

SANS 6243:2008

1.02

Deleterious clay content of the fines in aggregate (methylene blue adsorption indicator test)

SANS 6244:2006 (SABS SM 1244)

1.01

Particles of diameter not exceeding 20 µm and not exceeding 5 µm and smaller, respectively, in fine aggregate (pipette method)

SANS 6245:2006

1.02

Potential reactivity of aggregates with alkalis (accelerated mortar prism method)

SANS 6246:2006 (SABS SM 1246)

1.02

Treton impact value of aggregates

SANS 6248:2007

2

Paints and varnishes - Determination of traffic wear index

SANS 6250:2006 (SABS SM 1250)

1.01

Concrete tests - Density of compacted freshly mixed concrete

SANS 6251:2006

1.01

Concrete tests - Density of hardened concrete

SANS 6252:2006 (SABS SM 1252)

1.01

Concrete tests - Air content of freshly mixed concrete - Pressure method

SANS 6253:2006

1.01

Concrete tests - Tensile splitting strength of concrete

(SABS SM 1232)

(SABS SM 1235)

(SABS SM 1237)

(SABS SM 1239)

(SABS SM 1241)

(SABS SM 1243)

(SABS SM 1245)

(SABS SM 1248)

(SABS SM 1251)

(SABS SM 1253)

Page 140

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6254:2006 (SABS SM 1254)

1.01

Mortar tests - Initial drying shrinkage and wetting expansion of mortar

SANS 6255:2006

1.01

Mortar tests - Compressive strength of mortar

SANS 6257:2007 (SABS SM 1257)

2.01

Microbiological examination of canned meat and fish products

SANS 6258:2003

2

Paints and varnishes - Determination of wet-scrub resistance, washability and cleanability of coatings

SANS 6259:2003 (SABS SM 1259)

2

Paints and varnishes - Determination of brush and roller application properties

SANS 6260:2007

2

Paints and varnishes - Determination of skid resistance

SANS 6261:2008 (SABS SM 1261)

3

Paints and varnishes - Determination of coefficient of retro-reflected luminance by means of a portable retro-reflectometer

SANS 6262:1995/ISO 8243:1991, NEQ

1

Cigarettes - Sampling

SANS 6265:2006 (SABS SM 1265)

1.02

Water - Calcium and magnesium content - Atomic absorption spectrometric method

SANS 6266:2009

1.01

Virucidal efficacy of disinfectants and detergentdisinfectants using bacteriophages as indicator organisms

SANS 6267:2007 (SABS SM 1267)

1.01

Enumeration of lipolytic and oxidative organisms in foodstuffs

SANS 6268:2007

1.01

Microbiological examination of foodstuffs in retort pouches

SANS 6269:2005 (SABS SM 1269)

1.01

Welding of thermoplastics - Test methods for welded joints

SANS 6270-1:2004/ISO 6270-1:1998, IDT, Ed. 1

1

Paints and varnishes - Determination of resistance to humidity Part 1: Continuous condensation

SANS 6278:2007 (SABS SM 1278)

2.01

Boric acid equivalent mass concentration of aqueous solutions that contain borate timber preservatives

SANS 6279:2003

2

Paints and varnishes - Determination of residue on sieve

SANS 6280:2003 (SABS SM 1280)

2

Paints and varnishes - Application by dipping

SANS 6281-1:2007

2

Test methods for impregnated paper-insulated electric cables Part 1: Tests on insulating and semiconducting paper

SANS 6281-2:2007 (SABS SM 1281-2)

2

Test methods for impregnated paper-insulated electric cables Part 2: Tests on metallic sheaths

SANS 6281-3:2007

2

Test methods for impregnated paper-insulated electric cables Part 3: Tests on finished cable

(SABS SM 1255)

(SABS SM 1258)

(SABS SM 1260)

(SABS SM 1262)

(SABS SM 1266)

(SABS SM 1268)

(SABS SM 1279)

(SABS SM 1281-1)

(SABS SM 1281-3)

Page 141

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6281-4:2007 (SABS SM 1281-4)

2

Test methods for impregnated paper-insulated electric cables Part 4: Tests after installation

SANS 6282-1:2007/IEC 60055-1:1997, NEQ; IEC 60189-1:1986, NEQ, Ed. 2; IEC 60227-2:1997, NEQ; IEC 60245-2:1994, NEQ; IEC 60502:1994, NEQ; TELKOM 268AD:9999, NEQ (SABS SM 1282-1)

2

Test methods for bare conductors and conductors of insulated electric cables Part 1: Conductor resistance

SANS 6282-2:2007 (SABS SM 1282-2)

2

Test methods for bare conductors and conductors of insulated electric cables Part 2: Quality of metallic coatings

SANS 6282-3:2007

2

Test methods for bare conductors and conductors of insulated electric cables Part 3: Mechanical tests

SANS 6283:2007/IEC 60055-1:1997, NEQ, Ed. 5; IEC 60502-1:1998, NEQ, Ed. 1; IEC 60502-2:1998, NEQ, Ed. 1.1 (SABS SM 1283)

2

Test methods for armouring of insulated electric cables

SANS 6284-1:2007 (SABS SM 1284-1)

2

Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 1: Tests on XLPE insulation

SANS 6284-2:2007

2

Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 2: Tests on extruded semi-conducting screens

SANS 6284-3:2007 (SABS SM 1284-3)

2

Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 3: Tests on finished cable

SANS 6284-4:2007

2

Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 4: Tests after installation

SANS 6284-5:2007 (SABS SM 1284-5)

2

Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 5: Ageing tests

SANS 6286:2007

2

Test methods for sheathing of insulated electric cables

SANS 6289:2007 (SABS SM 1289)

2

Impulse voltage tests on cable and accessories of rated voltage up to and including 132 kV

SANS 6291:2008

2

Partial discharge measurements on power cables

SANS 6292:2006 (SABS SM 1292)

1.01

Lime tests - Chemical analysis - Sample preparation and reagents

SANS 6293:2006

1.01

Lime tests - Calcium oxide content

SANS 6294:2006 (SABS SM 1294)

1.01

Lime tests - Magnesium oxide content

SANS 6295:2006

1.01

Lime tests - Carbon dioxide content

SANS 6296:2006 (SABS SM 1296)

1.01

Lime tests - Available lime content

SANS 6297:2006

1.01

Lime tests - Free water content of slaked lime

(SABS SM 1282-3)

(SABS SM 1284-2)

(SABS SM 1284-4)

(SABS SM 1286)

(SABS SM 1291)

(SABS SM 1293)

(SABS SM 1295)

(SABS SM 1297)

Page 142

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6298:2006 (SABS SM 1298)

1.01

Lime tests - Loss on ignition

SANS 6299:2006

1.01

Lime tests - Physical properties - Sample preparation

SANS 6300:2006 (SABS SM 1300)

1.01

Lime tests - Isothermal slaking and preparation of quicklime

SANS 6301:2006

1.02

Lime tests - Fineness

SANS 6302:2006 (SABS SM 1302)

1.01

Lime tests - General expansion

SANS 6303:2004

1.01

Depth of penetration of borate preservatives in timber

SANS 6305:2006 (SABS SM 1305)

1.01

Lime tests - Pat soundness

SANS 6306:2003

1.01

Lime tests - Autoclave expansion

SANS 6307:2006 (SABS SM 1307)

1.01

Lime tests - Plasticity

SANS 6308:2006

1.01

Lime tests - Sulfur trioxide content

SANS 6310:2005 (SABS SM 1310)

1.01

Sulfate content of water (turbidimetric method)

SANS 6312:2009/ISO 6312:2001, IDT, Ed. 2

1

Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies

SANS 6315:2003

1

Water quality - Detection and enumeration of Vibrio cholerae

SANS 6316:2007

1.01

Detergents and cleaning agents - Corrosiveness to steel and aluminium

SANS 6317:2003

1

Methods of chemical analysis of meat and fish products

SANS 6318:2003

1

Detergents and cleaning agents - Determination of cleaning efficiency - Flat rectangular test plates

SANS 6319:2003

1

Detergents and cleaning agents - Determination of the effect on painted surfaces

SANS 6320:2003

1

Textiles - Solar UV protective properties - Method of test for apparel fabrics

SANS 6321:2009

1

Determination of the microbial inhibition of cosmetic soap bars and liquid hand and body washes

SANS 6340:2004/ISO 6340:1995, IDT, Ed. 1

1

Water quality - Detection of Salmonella species

SANS 6356:2004/ISO 6356:2000, IDT, Ed. 1

1

Textile floor coverings - Assessment of static electrical propensity - Walking test

(SABS SM 1299)

(SABS SM 1301)

(SABS SM 1303)

(SABS SM 1306)

(SABS SM 1308)

(SABS SM 1316)

Page 143

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6391:1997/ISO 6391:1997, IDT, Ed. 2 (SABS ISO 6391)

1

Meat and meat products - Enumeration of Escherichia coli - Colony-count technique at 44 °C using membranes

SANS 6406:2006/ISO 6406:2005, IDT, Ed. 2

2

Gas cylinders - Seamless steel gas cylinders Periodic inspection and testing

SANS 6439:2006/ISO 6439:1990, IDT, Ed. 2

1

Water quality - Determination of phenol index - 4Aminoantipyrine spectrometric methods after distillation

SANS 6446:2005/ISO 6446:1994, IDT, Ed. 1

1

Rubber products - Bridge bearings - Specification for rubber materials

SANS 6461-1:2003/ISO 6461-1:1986, IDT, Ed. 1

1

Water quality - Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) Part 1: Method by enrichment in a liquid medium

SANS 6461-2:2003/ISO 6461-2:1986, IDT, Ed. 1

1

Water quality - Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) Part 2: Method by membrane filtration

SANS 6471:2003/ISO 6471:1994, IDT, Ed. 2

1

Rubber, vulcanized - Determination of crystallization effects under compression

SANS 6504-3:2007/ISO 6504-3:2006, IDT, Ed. 2

2

Paints and varnishes - Determination of hiding power Part 3: Determination of contrast ratio of lightcoloured paints at a fixed spreading rate

SANS 6506-1:2009/ISO 6506-1:2005, IDT, Ed. 2

2

Metallic materials - Brinell hardness test Part 1: Test method

SANS 6506-2:2009/ISO 6506-2:2005, IDT, Ed. 2

2

Metallic materials - Brinell hardness test Part 2: Verification and calibration of testing machines

SANS 6506-3:2009/ISO 6506-3:2005, IDT, Ed. 2

2

Metallic materials - Brinell hardness test Part 3: Calibration of reference blocks

SANS 6506-4:2008/ISO 6506-4:2005, IDT, Ed. 1

1

Metallic materials - Brinell hardness test Part 4: Table of hardness values

SANS 6507-1:2006/ISO 6507-1:2005, IDT, Ed. 3 (SABS ISO 6507-1)

3

Metallic materials - Vickers hardness test Part 1: Test method

SANS 6507-2:2006/ISO 6507-2:2005, IDT, Ed. 3

3

Metallic materials - Vickers hardness test Part 2: Verification and calibration of testing machines

SANS 6507-3:2006/ISO 6507-3:2005, IDT, Ed. 3 (SABS ISO 6507-3)

3

Metallic materials - Vickers hardness test Part 3: Calibration of reference blocks

SANS 6507-4:2008/ISO 6507-4:2005, IDT, Ed. 1

1

Metallic materials - Vickers hardness test Part 4: Tables of hardness values

SANS 6508-1:2009/ISO 6508-1:2005, IDT, Ed. 2

2

Metallic materials - Rockwell hardness test Part 1: Test method (scales A,B,C,D,E,F,G,H,K,N,T)

SANS 6508-2:2009/ISO 6508-2:2005, IDT, Ed. 2

2

Metallic materials - Rockwell hardness test Part 2: Verification and calibration of testing machines (scales A,B,C,D,E,F,G,H,K,N,T)

SANS 6508-3:2009/ISO 6508-3:2005, IDT, Ed. 2

2

Metallic materials - Rockwell hardness test Part 3: Calibration of reference blocks (scales A,B,C,D,E,F,G,H,K,N,T)

SANS 6509:1981/ISO 6509:1981, IDT, Ed. 1

1

Corrosion of metals and alloys - Determination of dezincification resistance of brass

(SABS ISO 6406)

(SABS ISO 6504-3)

(SABS ISO 6507-2)

(SABS ISO 6509)

Page 144

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6520-1:2005/ISO 6520-1:1998, IDT, Ed. 1

1

Welding and allied processes - Classification of geometric imperfections in metallic materials Part 1: Fusion welding

SANS 6520-2:2004/ISO 6520-2:2001, IDT, Ed. 1

1

Welding and allied processes - Classification of geometric imperfections in metallic materials Part 2: Welding with pressure

SANS 6524:2005/ISO 6524:1992, IDT, Ed. 2

1

Plain bearings - Thin-walled half-bearings Checking of peripheral length

SANS 6525:2005/ISO 6525:1983, IDT, Ed. 1

1

Plain bearings - Ring type thrust washers made from strip - Dimensions and tolerances

SANS 6526:2005/ISO 6526:1983, IDT, Ed. 1

1

Plain bearings - Pressed bimetallic half thrust washers - Features and tolerances

SANS 6579:2003/ISO 6579:2002, IDT, Ed. 4

2

Microbiology of food and animal feeding stuffs Horizontal method for the detection of Salmonella spp.

SANS 6581:1980/ISO 6581:1980, IDT, Ed. 1 (SABS ISO 6581)

1

Anodizing of aluminium and its alloys Determination of the fastness to ultra-violet light of coloured anodic oxide coatings

SANS 6592:2003/ISO/IEC 6592:2000, IDT, Ed. 1

1

Information Technology - Guidelines for the documentation of computer-based application systems

SANS 6594:2008/ISO 6594:2006, IDT, Ed. 2

1

Cast iron drainage pipes and fittings - Spigot series

SANS 6683:2008/ISO 6683:2005, IDT, Ed. 2

2

Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests

SANS 6691:2005/ISO 6691:2000, IDT, Ed. 2

1

Thermoplastic polymers for plain bearings Classification and designation

SANS 6703-1:2005/ISO 6703-1:1984, IDT, Ed. 1

1

Water quality - Determination of cyanide Part 1: Determination of total cyanide

SANS 6703-2:2005/ISO 6703-2:1984, IDT, Ed. 1

1

Water quality - Determination of cyanide Part 2: Determination of easily liberatable cyanide

SANS 6709:2009/ISO 6709:2008, IDT, Ed. 2

1

Standard representation of geographic point location by coordinates

SANS 6731:2005/ISO 6731:1989, IDT, Ed. 1

1

Milk, cream and evaporated milk - Determination of total solids content (Reference method)

SANS 6777:1984/ISO 6777:1984, IDT, Ed. 1

1

Water quality - Determination of nitrite - Molecular absorption spectrometric method

SANS 6805:2009/ISO 6805:1994, IDT, Ed. 2

1

Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification

SANS 6814:2003/ISO 6814:2000, IDT, Ed. 2

1

Machinery for forestry - Mobile and self-propelled machinery - Terms, definitions and classification

SANS 6848:2007/ISO 6848:2004, IDT, Ed. 2 (SABS ISO 6848)

2

Arc welding and cutting - Nonconsumable tungsten electrodes - Classification

SANS 6873:2008/ISO 6873:1998, IDT, Ed. 2

1

Dental gypsum products

(SABS ISO 6579)

(SABS ISO 6777)

Page 145

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6878:2006/ISO 6878:2004, IDT, Ed. 2 (SABS ISO 6878)

2

Water quality - Determination of phosphorus Ammonium molybdate spectrometric method

SANS 6887-1:1999/ISO 6887-1:1999, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 1: General rules for the preparation of the initial suspension and decimal dilutions

SANS 6887-2:2004/ISO 6887-2:2003, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 2: Specific rules for the preparation of meat and meat products

SANS 6887-3:2004/ISO 6887-3:2003, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 3: Specific rules for the preparation of fish and fishery products

SANS 6887-4:2004/ISO 6887-4:2003, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products

SANS 6888-1:1999/ISO 6888-1:1999, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 1: Technique using Baird-Parker agar medium

1

Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 2: Technique using rabbit plasma fibrinogen agar medium

SANS 6888-3:2005/ISO 6888-3:2003, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 3: Detection and MPN technique for low numbers

SANS 6891:1983/ISO 6891:1983, IDT, Ed. 1 (SABS ISO 6891)

1

Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics

SANS 6892:1998/ISO 6892:1998, IDT, Ed. 2

2

Metallic materials - Tensile testing at ambient temperature

SANS 6938:1984/ISO 6938:1984, IDT, Ed. 1 (SABS ISO 6938)

1

Textiles - Natural fibres - Generic names and definitions

SANS 6940:2005/ISO 6940:2004, IDT, Ed. 2

2

Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens

SANS 6941:2004/ISO 6941:2003, IDT, Ed. 2 (SABS ISO 6941)

2

Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens

SANS 6946:2007/ISO 6946:1996, IDT, Ed. 1

1

Building components and building elements Thermal resistance and thermal transmittance Calculation method

SANS 6947:1990/ISO 6947:1990, IDT, Ed. 2 (SABS ISO 6947)

1

Welds - Working positions - Definitions of angles of slope and rotation

(SABS ISO 6887-1)

(SABS ISO 6888-1)

SANS 6888-2:1999/ISO 6888-2:1999, IDT, Ed. 1 (SABS ISO 6888-2)

(SABS ISO 6892)

(SABS ISO 6940)

Page 146

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 6971:2006/ISO 6971:2002, IDT, Ed. 2

1

Cranked-link drag chains of welded construction, attachments and sprockets

SANS 6972:2006/ISO 6972:2002, IDT, Ed. 2

1

Cranked-link mill chains of welded construction, attachments and sprockets

SANS 6973:2006/ISO 6973:1986, IDT, Ed. 1

1

Drop-forged rivetless chains for conveyors

SANS 6988:1985/ISO 6988:1985, IDT, Ed. 1

1

Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture

SANS 6993:2004/ISO 6993:2001, IDT, Ed. 2

1

Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels - Specifications

SANS 7001:2008/ISO 7001:2007, IDT, Ed. 3

1

Graphical symbols - Public information symbols

SANS 7005-1:2010/ISO 7005-1:1992, IDT, Ed. 1

1

Metallic flanges Part 1: Steel flanges

SANS 7005-2:2010/ISO 7005-2:1988, IDT, Ed. 1

1

Metallic flanges Part 2: Cast iron flanges

SANS 7064:2009/ISO/IEC 7064:2003, IDT, Ed. 1

1

Information technology - Security techniques Check character systems

SANS 7146:2005/ISO 7146:1993, IDT, Ed. 1

1

Plain bearings - Terms, characteristics and causes of damage and changes in appearance

SANS 7148-2:2005/ISO 7148-2:1999, IDT, Ed. 1

1

Plain bearings - Testing of the tribological behaviour of bearing materials Part 2: Testing of polymerbased bearing materials

SANS 7203-1:2007/ISO 7203-1:1995, IDT, Ed. 1

1

Fire extinguishing media - Foam concentrates Part 1: Specification for low expansion foam concentrates for top application to water-immiscible liquids

SANS 7203-2:2007/ISO 7203-2:1995, IDT, Ed. 1

1

Fire extinguishing media - Foam concentrates Part 2: Specification for medium and high expansion foam concentrates for top application to waterimmiscible liquids

SANS 7203-3:2007/ISO 7203-3:1999, IDT, Ed. 1

1

Fire extinguishing media - Foam concentrates Part 3: Specification for low expansion foam concentrates for top application to water-miscible liquids

SANS 7211-2:1984/ISO 7211-2:1984, IDT, Ed. 1

1

Textiles - Woven fabrics - Construction - Methods of analysis Part 2: Determination of number of threads per unit length

SANS 7211-3:1984/ISO 7211-3:1984, IDT, Ed. 1 (SABS ISO 7211-3)

1

Textiles - Woven fabrics - Construction - Methods of analysis Part 3: Determination of crimp of yarn in fabric

SANS 7211-4:1984/ISO 7211-4:1984, IDT, Ed. 1

1

Textiles - Woven fabrics - Construction - Methods of analysis Part 4: Determination of twist in yarn removed from fabric

SANS 7211-5:1984/ISO 7211-5:1984, IDT, Ed. 1 (SABS ISO 7211-5)

1

Textiles - Woven fabrics - Construction - Methods of analysis Part 5: Determination of linear density of yarn removed from fabric

SANS 7218:2008/ISO 7218:2007, IDT, Ed. 3

2

Microbiology of food and animal feeding stuffs General requirements and guidance for microbiological examinations

(SABS ISO 6988)

(SABS ISO 7211-2)

(SABS ISO 7211-4)

(SABS ISO 7218)

Page 147

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 7240-16:2008/ISO 7240-16:2007, IDT, Ed. 1

1

Fire detection and alarm systems Part 16: Sound system control and indicating equipment

SANS 7240-19:2008/ISO 7240-19:2007, IDT, Ed. 1

1

Fire detection and alarm systems Part 19: Design, installation, commissioning and service of sound systems for emergency purposes

SANS 7251:2005/ISO 7251:2005, IDT, Ed. 3 (SABS ISO 7251)

2

Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of presumptive Escherichia coli - Most probable number technique

SANS 7253:1996/ISO 7253:1996, IDT, Ed. 2 (SABS ISO 7253)

2

Paints and varnishes - Determination of resistance to neutral salt spray (fog)

SANS 7284:1993/ISO 7284:1993, IDT, Ed. 2

1

Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the automobile industry

SANS 7286:1986/ISO 7286:1986, IDT, Ed. 1 (SABS ISO 7286)

1

Graphical symbols for resistance welding equipment

SANS 7296-1:2007/ISO 7296-1:1991, IDT, Ed. 1

1

Cranes - Graphic symbols Part 1: General

SANS 7296-3:2007/ISO 7296-3:2006, IDT, Ed. 1

1

Cranes - Graphical symbols Part 3: Tower cranes

SANS 7363:2002/ISO 7363:1986, IDT, Ed. 1

1

Cranes and lifting appliances - Technical characteristics and acceptance documents

SANS 7393-1:2005/ISO 7393-1:1985, IDT, Ed. 1

1

Water quality - Determination of free chlorine and total chlorine Part 1: Titrimetric method using N,Ndiethyl-1,4-phenylenediamine

SANS 7393-2:2005/ISO 7393-2:1985, IDT, Ed. 1

1

Water quality - Determination of free chlorine and total chlorine Part 2: Colorimetric method using N,Ndiethyl-1,4-phenylenediamine, for routine control purposes

SANS 7393-3:2005/ISO 7393-3:1990, IDT, Ed. 2

1

Water quality - Determination of free chlorine and total chlorine Part 3: Iodometric titration method for the determination of total chlorine

SANS 7396-1:2009/ISO 7396-1:2007, MOD, Ed. 2

1

Medical gas pipeline systems Part 1: Pipeline systems for compressed medical gases and vacuum

SANS 7396-2:2008/ISO 7396-2:2007, IDT, Ed. 2

1

Medical gas pipeline systems Part 2: Anaesthetic gas scavenging disposal systems

SANS 7404-1:1994/ISO 7404-1:1994, IDT, Ed. 2 (SABS ISO 7404-1)

1

Methods for the petrographic analysis of bituminous coal and anthracite Part 1: Vocabulary

SANS 7404-2:1985/ISO 7404-2:1985, IDT, Ed. 1

1

Methods for the petrographic analysis of bituminous coal and anthracite Part 2: Method of preparing coal samples

SANS 7404-3:1994/ISO 7404-3:1994, IDT, Ed. 2 (SABS ISO 7404-3)

1

Methods for the petrographic analysis of bituminous coal and anthracite Part 3: Method of determining maceral group composition

SANS 7404-5:1994/ISO 7404-5:1994, IDT, Ed. 2

1

Methods for the petrographic analysis of bituminous coal and anthracite Part 5: Method of determining microscopically the reflectance of vitrinite

2

Metallic materials - Bend test

(SABS ISO 7284)

(SABS ISO 7404-2)

(SABS ISO 7404-5) SANS 7438:2009/ISO 7438:2005, IDT, Ed. 2

Page 148

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 7439:2009/ISO 7439:2002, IDT, Ed. 2

1

Copper-bearing intra-uterine contraceptive devices Requirements, tests

SANS 7483:2010/ISO 7483:1991, IDT, Ed. 1

1

Dimensions of gaskets for use with flanges to ISO 7005

SANS 7491-2:1992/BS 7491-2:1992, IDT (SABS BS 7491-2)

1

Glass fibre reinforced plastics cisterns for cold-water storage Part 2: Specification for one-piece cisterns of nominal capacity from 500 l to 25 000 l

SANS 7491-3:1994/BS 7491-3:1994, IDT

1

Glass fibre reinforced plastics cisterns for cold water storage Part 3: Specification for sectional tanks

SANS 7500-1:2009/ISO 7500-1:2004, IDT, Ed. 3

1

Metallic materials - Verification of static uniaxial testing machines Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system

SANS 7500-2:2009/ISO 7500-2:2006, IDT, Ed. 2

1

Metallic materials - Verification of static uniaxial testing machines Part 2: Tension creep testing machines - Verification of the applied force

SANS 7531:1987/ISO 7531:1987, IDT, Ed. 1

1

Wire rope slings for general purposes Characteristics and specifications

SANS 7587:1986/ISO 7587:1986, IDT, Ed. 1 (SABS ISO 7587)

1

Electroplated coatings of tin-lead alloys Specification and test methods

SANS 7592:1983/ISO 7592:1983, IDT, Ed. 1

1

Calibrated round steel link lifting chains - Guidelines to proper use and maintenance

SANS 7593:1986/ISO 7593:1986, IDT, Ed. 1 (SABS ISO 7593)

1

Chain slings assembled by methods other than welding - Grade T(8)

SANS 7619:2003/ISO 7619:1997, IDT, Ed. 2

1

Rubber - Determination of indentation hardness by means of pocket hardness meters

SANS 7619-1:2009/ISO 7619-1:2004, IDT, Ed. 1

1

Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 1: Durometer method (Shore hardness)

SANS 7619-2:2009/ISO 7619-2:2004, IDT, Ed. 1

1

Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 2: IRHD pocket meter method

SANS 7675:2004/ISO 7675:2003, IDT, Ed. 2

1

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Chlorinated poly(vinyl chloride) (PVC-C)

SANS 7682:2006/ISO 7682:2003, IDT, Ed. 2

1

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Acrylonitrile-butadiene-styrene (ABS)

SANS 7724-1:1984/ISO 7724-1:1984, IDT, Ed. 1 (SABS ISO 7724-1)

1

Paints and varnishes - Colorimetry Part 1: Principles

SANS 7724-2:1984/ISO 7724-2:1984, IDT, Ed. 1

1

Paints and varnishes - Colorimetry Part 2: Colour measurement

SANS 7724-3:1984/ISO 7724-3:1984, IDT, Ed. 1 (SABS ISO 7724-3)

1

Paints and varnishes - Colorimetry Part 3: Calculation of colour differences

SANS 7743:2003/ISO 7743:1989, IDT, Ed. 1

1

Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties

SANS 7752-1:2007/ISO 7752-1:1983, IDT, Ed. 1

1

Lifting appliances - Controls - Layout and characteristics Part 1: General principles

(SABS BS 7491-3)

(SABS ISO 7531)

(SABS ISO 7592)

(SABS ISO 7724-2)

Page 149

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 7752-2:2007/ISO 7752-2:1985, IDT, Ed. 1

1

Lifting appliances - Controls - Layout and characteristics Part 2: Basic arrangement and requirements for mobile cranes

SANS 7752-3:2007/ISO 7752-3:1993, IDT, Ed. 1

1

Cranes - Controls - Layout and characteristics Part 3: Tower cranes

SANS 7752-5:2002/ISO 7752-5:1985, IDT, Ed. 1

1

Lifting appliances - Controls - Layout and characteristics - Part 5: Overhead travelling cranes and portal bridge cranes

SANS 7799:2003/ISO 7799:1985, IDT, Ed. 1

1

Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test

SANS 7801:2003/ISO 7801:1984, IDT, Ed. 1

1

Metallic materials - Wire - Reverse bend test

SANS 7802:2003/ISO 7802:1983, IDT, Ed. 1

1

Metallic materials - Wire - Wrapping test

SANS 7810:2004/ISO/IEC 7810:2003, IDT, Ed. 3 (SABS ISO/IEC 7810)

2

Identification cards - Physical characteristics

SANS 7811-1:2004/ISO/IEC 7811-1:2002, IDT, Ed. 3 2 (SABS ISO/IEC 7811-1)

Identification cards - Recording technique Part 1: Embossing

SANS 7811-2:2004/ISO/IEC 7811-2:2001, IDT, Ed. 3 2 (SABS ISO/IEC 7811-2)

Identification cards - Recording technique Part 2: Magnetic stripe - Low coercivity

SANS 7811-6:2009/ISO/IEC 7811-6:2008, IDT, Ed. 3 3

Identification cards - Recording technique Part 6: Magnetic stripe - High coercivity

(SABS ISO/IEC 7811-6) SANS 7811-9:2009/ISO/IEC 7811-9:2008, IDT, Ed. 1 1

Identification cards - Recording technique Part 2: Tactile identifier mark

SANS 7812-1:2008/ISO/IEC 7812-1:2006, IDT, Ed. 3 3 (SABS ISO/IEC 7812-1)

Identification cards - Identification of issuers Part 1: Numbering system

SANS 7812-2:2008/ISO/IEC 7812-2:2007, IDT, Ed. 3 3 (SABS ISO/IEC 7812-2)

Identification cards - Identification of issuers Part 2: Application and registration procedures

SANS 7813:2007/ISO/IEC 7813:2006, IDT, Ed. 6 (SABS ISO/IEC 7813)

Information technology - Identification cards Financial transaction cards

SANS 7816-1:1998/ISO/IEC 7816-1:1998, IDT, Ed. 1 1 (SABS ISO/IEC 7816-1)

Identification cards - Integrated circuit(s) cards with contacts Part 1: Physical characteristics

SANS 7816-2:2009/ISO/IEC 7816-2:2007, IDT, Ed. 2 2 (SABS ISO/IEC 7816-2)

Identification cards - Integrated circuit cards Part 2: Cards with contacts - Dimensions and location of the contacts

SANS 7816-3:2009/ISO/IEC 7816-3:2006, IDT, Ed. 3 3 (SABS ISO/IEC 7816-3)

Identification cards - Integrated circuit cards - Part 3: Cards with contacts - Electrical interface and transmission protocols

SANS 7816-4:2005/ISO/IEC 7816-4:2005, IDT, Ed. 2 2 (SABS ISO/IEC 7816-4)

Identification cards - Integrated circuit cards Part 4: Organization, security and commands for interchange

SANS 7816-5:2005/ISO/IEC 7816-5:2004, IDT, Ed. 2 2 (SABS ISO/IEC 7816-5)

Identification cards - Integrated circuit cards Part 5: Registration of application providers

SANS 7816-6:2005/ISO/IEC 7816-6:2004, IDT, Ed. 2 2

Identification cards - Integrated circuit cards Part 6: Interindustry data elements for interchange

(SABS ISO/IEC 7816-6)

3

Page 150

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 7816-7:1999/ISO/IEC 7816-7:1999, IDT, Ed. 1 1 (SABS ISO/IEC 7816-7)

Identification cards - Integrated circuit(s) cards with contacts Part 7: Interindustry commands for Structured Card Query Language (SCQL)

SANS 7816-8:2005/ISO/IEC 7816-8:2004, IDT, Ed. 2 2

Identification cards - Integrated circuit cards Part 8: Commands for security operations

(SABS ISO/IEC 7816-8) SANS 7816-9:2005/ISO/IEC 7816-9:2004, IDT, Ed. 2 1

Identification cards - Integrated circuit cards Part 9: Commands for card management

SANS 7816-10:1999/ISO/IEC 7816-10:1999, IDT, Ed. 1 1 (SABS ISO/IEC 7816-10)

Identification cards - Integrated circuit(s) cards with contacts Part 10: Electronic signals and answer to reset for synchronous cards

SANS 7816-11:2005/ISO/IEC 7816-11:2004, IDT, Ed. 1 1

Identification cards - Integrated circuit cards Part 11: Personal verification through biometric methods

SANS 7816-12:2007/ISO/IEC 7816-12:2005, IDT, Ed. 1 1

Identification cards - Integrated circuit cards Part 12: Cards with contacts - USB electrical interface and operating procedures

SANS 7816-13:2007/ISO/IEC 7816-13:2007, IDT, Ed. 1 1

Identification cards - Integrated circuit cards Part 13: Commands for application management in a multiapplication environment

SANS 7816-15:2005/ISO/IEC 7816-15:2004, IDT, Ed. 1 1

Identification cards - Integrated circuit cards Part 15: Cryptographic information application

SANS 7840:2008/ISO 7840:2004, IDT, Ed. 3

1

Small craft - Fire-resistant fuel hoses

SANS 7866:1999/ISO 7866:1999, IDT, Ed. 1

1

Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing

SANS 7870-1:2008/ISO 7870-1:2007, IDT, Ed. 1

1

Control charts Part 1: General guidelines

SANS 7875-1:2006/ISO 7875-1:1996, IDT, Ed. 2

1

Water quality - Determination of surfactants Part 1: Determination of anionic surfactants by measurement of the methylene blue index (MBAS)

SANS 7887:2005/ISO 7887:1994, IDT, Ed. 2

1

Water quality - Examination and determination of colour

SANS 7888:2005/ISO 7888:1985, IDT, Ed. 1

1

Water quality - Determination of electrical conductivity

SANS 7899-1:2004/ISO 7899-1:1998, IDT, Ed. 2

1

Water quality - Detection and enumeration of intestinal enterococci Part 1: Miniaturized method (Most Probable Number) for surface and waste water

SANS 7899-2:2004/ISO 7899-2:2000, IDT, Ed. 2

1

Water quality - Detection and enumeration of intestinal enterococci Part 2: Membrane filtration method

SANS 7904-1:2006/ISO 7904-1:1995, IDT, Ed. 1

1

Plain bearings - Symbols Part 1: Basic symbols

SANS 7904-2:2006/ISO 7904-2:1995, IDT, Ed. 1

1

Plain bearings - Symbols Part 2: Applications

SANS 7931:1985/ISO 7931:1985, IDT, Ed. 1 (SABS ISO 7931)

1

Insulation caps and bushes for resistance welding equipment

(SABS ISO 7866)

Page 151

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 7932:2005/ISO 7932:2004, IDT, Ed. 3

2

Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of presumptive Bacillus cereus - Colony-count technique at 30 °C

SANS 7937:2007/ISO 7937:2004, IDT, Ed. 3 (SABS ISO 7937)

2

Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of Clostridium perfringens - Colony-count technique

SANS 7954:1987/ISO 7954:1987, IDT, Ed. 1

1

Microbiology - General guidance for enumeration of yeasts and moulds - Colony count technique at 25 °C

SANS 8009:2007/ISO 8009:2004, IDT, Ed. 1

1

Mechanical contraceptives - Reusable natural and silicone rubber contraceptive diaphragms Requirements and tests

SANS 8082:2003/ISO 8082:2003, IDT, Ed. 2

1

Self-propelled machinery for forestry - Roll-over protective structures - Laboratory tests and performance requirements

SANS 8083:2008/ISO 8083:2006, IDT, Ed. 2

2

Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements

SANS 8084:2003/ISO 8084:2003, IDT, Ed. 1

1

Machinery for forestry - Operator protective structures - Laboratory tests and performance requirements

SANS 8087:2008/ISO 8087:1985, IDT, Ed. 1

1

Mobile cranes - Drum and sheave sizes

SANS 8099:2008/ISO 8099:2000, IDT, Ed. 2

1

Small craft - Toilet waste retention systems

SANS 8124-1:2009/ISO 8124-1:2009, IDT, Ed. 2

2

Safety of toys Part 1: Safety aspects related to mechanical and physical properties

SANS 8124-2:2008/ISO 8124-2:2007, IDT, Ed. 2

2

Safety of toys Part 2: Flammability

SANS 8124-3:1997/ISO 8124-3:1997, IDT, Ed. 1 (SABS ISO 8124-3)

1

Safety of toys Part 3: Migration of certain elements

SANS 8144-1:2006/ISO 8144-1:1995, IDT, Ed. 1

1

Thermal insulation - Mineral wool mats for ventilated roof spaces Part 1: Specification for applications with restricted ventilation

SANS 8165-2:1999/ISO 8165-2:1999, IDT, Ed. 1 (SABS ISO 8165-2)

1

Water quality - Determination of selected monovalent phenols Part 2: Method by derivatization and gas chromatography

SANS 8167:1989/ISO 8167:1989, IDT, Ed. 1

1

Projections for resistance welding

SANS 8179-1:2010/ISO 8179-1:2004, IDT, Ed. 2

1

Ductile iron pipes - External zinc-based coating Part 1: Metallic zinc with finishing layer

SANS 8179-2:2010/ISO 8179-2:1995, IDT, Ed. 1

1

Ductile iron pipes - External zinc coating Part 2: Zinc rich paint with finishing layer

SANS 8180:2010/ISO 8180:2006, IDT, Ed. 2

1

Ductile iron pipelines - Polyethylene sleeving for site application

SANS 8191-1:1987/ISO 8191-1:1987, IDT, Ed. 1

1

Furniture - Assessment of the ignitability of upholstered furniture Part 1: Ignition source: smouldering cigarette

(SABS ISO 7954)

(SABS ISO 8124-2)

(SABS ISO 8167)

(SABS ISO 8191-1)

Page 152

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 8191-2:1988/ISO 8191-2:1988, IDT, Ed. 1 (SABS ISO 8191-2)

1

Furniture - Assessment of ignitability of upholstered furniture Part 2: Ignition source: match-flame equivalent

SANS 8199:2006/ISO 8199:2005, IDT, Ed. 2

2

Water quality - General guidance on the enumeration of micro-organisms by culture

SANS 8201:1987/ISO 8201:1987, IDT, Ed. 1 (SABS ISO 8201)

1

Acoustics - Audible emergency evacuation signal

SANS 8207:2004/ISO 8207:1996, IDT, Ed. 1

1

Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes

SANS 8229:1991/ISO 8229:1991, IDT, Ed. 1 (SABS ISO 8229)

1

Operations and baths relating to dry-cleaning machines - Vocabulary

SANS 8230:1997/ISO 8230:1997, IDT, Ed. 1

1

Safety requirements for dry-cleaning machines using perchloroethylene

SANS 8232:1988/ISO 8232:1988, IDT, Ed. 1 (SABS ISO 8232)

1

Closed-circuit dry-cleaning machines - Defining and checking of machine characteristics

SANS 8253-1:1989/ISO 8253-1:1989, IDT, Ed. 1

1

Acoustics - Audiometric test methods Part 1: Basic pure tone air and bone conduction threshold audiometry

SANS 8253-2:1992/ISO 8253-2:1992, IDT, Ed. 1 (SABS ISO 8253-2)

1

Acoustics - Audiometric test methods Part 2: Sound field audiometry with pure tone and narrow-band test signals

SANS 8253-3:1996/ISO 8253-3:1996, IDT, Ed. 1

1

Acoustics - Audiometric test methods Part 3: Speech audiometry

(SABS ISO 8230)

(SABS ISO 8253-1)

(SABS ISO 8253-3) SANS 8261:2005/ISO 8261 IDF 122:2001, IDT, Ed. 2 1

Milk and milk products - General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination

SANS 8264:1989/ISO 8264:1989, IDT, Ed. 1

1

Hard coal - Determination of the swelling properties using a dilatometer

SANS 8297:1994/ISO 8297:1994, IDT, Ed. 1 (SABS ISO 8297)

1

Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method

SANS 8314:2005/ISO 8314:1987, IDT, Ed. 1

1

Shipbuilding and marine structures - Trunnion pieces for span bearings and lead block bearings

SANS 8362-1:1989/ISO 8362-1:1989, IDT, Ed. 1

1

Injection containers for injectables and accessories Part 1: Injection vials made of glass tubing

SANS 8388:1998/ISO 8388:1998, IDT, Ed. 1 (SABS ISO 8388)

1

Knitted fabrics - Types - Vocabulary

SANS 8401:1986/ISO 8401:1986, IDT, Ed. 1

1

Metallic coatings - Review of methods of measurement of ductility

SANS 8420:2003/ISO 8420:2002, IDT, Ed. 2

1

Animal and vegetable fats and oils - Determination of content of polar compounds

SANS 8430-1:1988/ISO 8430-1:1988, IDT, Ed. 1

1

Resistance spot welding - Electrode holders Part 1: Taper fixing 1:10

1

Resistance spot welding - Electrode holders Part 2: Morse taper fixing

(SABS ISO 8264)

(SABS ISO 8362-1)

(SABS ISO 8401)

(SABS ISO 8430-1) SANS 8430-2:1988/ISO 8430-2:1988, IDT, Ed. 1 (SABS ISO 8430-2)

Page 153

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 8430-3:1988/ISO 8430-3:1988, IDT, Ed. 1 (SABS ISO 8430-3)

1

Resistance spot welding - Electrode holders Part 3: Parallel shank fixing for end thrust

SANS 8443:2005/ISO 8443:1999, IDT, Ed. 2

1

Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions

SANS 8459:2009/ISO 8459:2009, IDT, Ed. 1

1

Information and documentation - Bibliographic data element directory for use in data exchange and enquiry

SANS 8466-1:2002/ISO 8466-1:1990, IDT, Ed. 1

1

Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics Part 1: Statistical evaluation of the linear calibration function

SANS 8466-2:2002/ISO 8466-2:2001, IDT, Ed. 2

1

Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics Part 2: Calibration strategy for nonlinear second-order calibration functions

SANS 8469:2008/ISO 8469:2006, IDT, Ed. 2

1

Small craft - Non-fire-resistant fuel hoses

SANS 8491:2003/ISO 8491:1998, IDT, Ed. 2

1

Metallic materials - Tube (in full section) - Bend test

SANS 8492:2003/ISO 8492:1998, IDT, Ed. 2

1

Metallic materials - Tube - Flattening test

SANS 8493:2003/ISO 8493:1998, IDT, Ed. 2

1

Metallic materials - Tube - Drift-expanding test

SANS 8494:2003/ISO 8494:1998, IDT, Ed. 2

1

Metallic materials - Tube - Flanging test

SANS 8495:2003/ISO 8495:1998, IDT, Ed. 2

1

Metallic materials - Tube - Ring-expanding test

SANS 8496:2003/ISO 8496:1998, IDT, Ed. 2

1

Metallic materials - Tube - Ring tensile test

SANS 8498:1990/ISO 8498:1990, IDT, Ed. 1

1

Woven fabrics - Description of defects - Vocabulary

SANS 8499:2004/ISO 8499:2003, IDT, Ed. 2 (SABS ISO 8499)

2

Knitted fabrics - Description of defects - Vocabulary

SANS 8501-3:2008/ISO 8501-3:2006, IDT, Ed. 2

1

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness Part 3: Preparation grades of welds, edges and other areas with surface imperfections

SANS 8502-2:2008/ISO 8502-2:2005, IDT, Ed. 2

1

Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness Part 2: Laboratory determination of chloride on cleaned surfaces

SANS 8502-3:2008/ISO 8502-3:1992, IDT, Ed. 1

1

Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)

(SABS33)

(SABS ISO 8498)

Page 154

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 8502-5:2008/ISO 8502-5:1998, IDT, Ed. 1

1

Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)

SANS 8528-1:2008/ISO 8528-1:2005, IDT, Ed. 2 (SABS ISO 8528-1)

2

Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance

SANS 8528-2:2008/ISO 8528-2:2005, IDT, Ed. 2

2

Reciprocating internal combustion engine driven alternating current generating sets Part 2: Engines

SANS 8528-3:2008/ISO 8528-3:2005, IDT, Ed. 2 (SABS ISO 8528-3)

2

Reciprocating internal combustion engine driven alternating current generating sets Part 3: Alternating current generators for generating sets

SANS 8528-4:2008/ISO 8528-4:2005, IDT, Ed. 2

2

Reciprocating internal combustion engine driven alternating current generating sets Part 4: Controlgear and switchgear

SANS 8528-5:2008/ISO 8528-5:2005, IDT, Ed. 2 (SABS ISO 8528-5)

2

Reciprocating internal combustion engine driven alternating current generating sets Part 5: Generating sets

SANS 8528-6:2008/ISO 8528-6:2005, IDT, Ed. 2

2

Reciprocating internal combustion engine driven alternating current generating sets Part 6: Test methods

SANS 8528-7:1994/ISO 8528-7:1994, IDT, Ed. 1 (SABS ISO 8528-7)

1

Reciprocating internal combustion engine driven alternating current generating sets Part 7: Technical declarations for specification and design

SANS 8528-8:2006/ISO 8528-8:1995, IDT, Ed. 1

1

Reciprocating internal combustion engine driven alternating current generating sets Part 8: Requirements and tests for low-power generating sets

SANS 8528-9:2006/ISO 8528-9:1995, IDT, Ed. 1

1

Reciprocating internal combustion engine driven alternating current generating sets Part 9: Measurement and evaluation of mechanical vibrations

SANS 8528-10:2006/ISO 8528-10:1998, IDT, Ed. 1

1

Reciprocating internal combustion engine driven alternating current generating sets Part 10: Measurement of airborne noise by the enveloping surface method

SANS 8528-12:2006/ISO 8528-12:1997, IDT, Ed. 1

1

Reciprocating internal combustion engine driven alternating current generating sets Part 12: Emergency power supply to safety services

SANS 8539:2010/ISO 8539:2009, IDT, Ed. 2

2

Forged steel lifting components for use with Grade 8 chain

SANS 8543:1998/ISO 8543:1998, IDT, Ed. 2 (SABS ISO 8543)

1

Textile floor coverings - Methods for determination of mass

SANS 8566-1:2002/ISO 8566-1:1992, IDT, Ed. 1

1

Cranes - Cabins Part 1: General

SANS 8566-2:2007/ISO 8566-2:1995, IDT, Ed. 1

1

Cranes - Cabins Part 2: Mobile cranes

SANS 8566-3:2007/ISO 8566-3:1992, IDT, Ed. 1

1

Cranes - Cabins Part 3: Tower cranes

SANS 8566-4:2008/ISO 8566-4:1998, IDT, Ed. 1

1

Cranes - Cabins Part 4: Jib cranes

(SABS ISO 8528-2)

(SABS ISO 8528-4)

(SABS ISO 8528-6)

(SABS ISO 8539)

Page 155

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 8566-5:2002/ISO 8566-5:1992, IDT, Ed. 1

1

Cranes - Cabins Part 5: Overhead travelling and portal bridge cranes

SANS 8601:2009/ISO 8601:2004, IDT, Ed. 3

2

Data elements and interchange formats Information interchange - Representation of dates and times

SANS 8662-1:1988/ISO 8662-1:1988, IDT, Ed. 1 (SABS ISO 8662-1)

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 1: General

SANS 8662-2:1992/ISO 8662-2:1992, IDT, Ed. 1

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 2: Chipping hammers and riveting hammers

SANS 8662-3:1992/ISO 8662-3:1992, IDT, Ed. 1 (SABS ISO 8662-3)

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 3: Rock drills and rotary hammers

SANS 8662-4:1994/ISO 8662-4:1994, IDT, Ed. 1

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 4: Grinders

SANS 8662-5:2003/ISO 8662-5:1992, IDT, Ed. 1

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 5: Pavement breakers and hammers for construction work

SANS 8662-6:2003/ISO 8662-6:1994, IDT, Ed. 1

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 6: Impact drills

SANS 8662-7:2003/ISO 8662-7:1997, IDT, Ed. 1

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action

SANS 8662-8:2003/ISO 8662-8:1997, IDT, Ed. 1

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 8: Polishers and rotary, orbital and random orbital sanders

SANS 8662-9:2003/ISO 8662-9:1996, IDT, Ed. 1

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 9: Rammers

SANS 8662-10:2003/ISO 8662-10:1998, IDT, Ed. 1

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 10: Nibblers and shears

SANS 8662-11:2003/ISO 8662-11:1999, IDT, Ed. 1

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 11: Fastener driving tools

SANS 8662-12:2003/ISO 8662-12:1997, IDT, Ed. 1

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action

SANS 8662-13:2003/ISO 8662-13:1997, IDT, Ed. 1

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 13: Die grinders

SANS 8662-14:2003/ISO 8662-14:1996, IDT, Ed. 1

1

Hand-held portable power tools - Measurement of vibrations at the handle Part 14: Stone-working tools and needle scalers

SANS 8665:2008/ISO 8665:2006, IDT, Ed. 3

1

Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations

SANS 8666:2008/ISO 8666:2002, IDT, Ed. 1

1

Small craft - Principal data

SANS 8686-1:2009/ISO 8686-1:1989, IDT, Ed. 1

1

Cranes - Design principles for loads and load combinations Part 1: General

(SABS ISO 8662-2)

(SABS ISO 8662-4)

Page 156

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 8686-3:2007/ISO 8686-3:1998, IDT, Ed. 1

1

Cranes - Design principles for loads and load combinations Part 3: Tower cranes

SANS 8686-5:2003/ISO 8686-5:1992, IDT, Ed. 1

1

Cranes - Design principles for loads and load combinations Part 5: Overhead travelling and portal bridge cranes

SANS 8764-1:2009/ISO 8764-1:2004, IDT, Ed. 3

1

Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws Part 1: Driver tips

SANS 8764-2:2009/ISO 8764-2:2004, IDT, Ed. 2

1

Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers

SANS 8770:2008/ISO 8770:2003, IDT, Ed. 2

1

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polyethylene (PE)

SANS 8773:2007/ISO 8773:2006, IDT, Ed. 2

2

Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene (PP)

SANS 8825-1:2007/ISO/IEC 8825-1:2002, IDT, Ed. 3 1

Information technology - ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)

SANS 8825-2:2007/ISO/IEC 8825-2:2002, IDT, Ed. 3 1

Information technology - ASN.1 encoding rules: Specification of Packed Encoding Rules (PER)

SANS 8825-3:2007/ISO/IEC 8825-3:2002, IDT, Ed. 1 1

Information technology - ASN.1 encoding rules: Specification of Encoding Control Notation (ECN)

SANS 8825-4:2007/ISO/IEC 8825-4:2002, IDT, Ed. 1 1

Information technology - ASN.1 encoding rules: XML Encoding Rules (XER)

SANS 8825-5:2007/ISO/IEC 8825-5:2004, IDT, Ed. 1 1

Information technology - ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1

SANS 8826-1:2005/ISO 8826-1:1989, IDT, Ed. 1

1

Technical drawings - Rolling bearings Part 1: General simplified representation

SANS 8833:1989/ISO 8833:1989, IDT

1

Magnetite for use in coal preparation - Test methods

SANS 8845:2008/ISO 8845:1994, IDT, Ed. 1

1

Small craft with inboard engine - Propeller shaft ends and bosses with 1:16 taper

SANS 8846:2008/ISO 8846:1990, IDT, Ed. 1

1

Small craft - Electrical devices - Protection against ignition of surrounding flammable gases

SANS 8847:2008/ISO 8847:2004, IDT, Ed. 2

1

Small craft - Steering gear - Cable and pulley systems

SANS 8848:2008/ISO 8848:1990, IDT, Ed. 1

1

Small craft - Remote steering systems

SANS 8849:2008/ISO 8849:2003, IDT, Ed. 2

1

Small craft - Electrically operated direct-current bilge pumps

SANS 8914:1990/ISO 8914:1990, IDT, Ed. 1

1

Microbiology - General guidance for the detection of Vibrio parahaemolyticus

(SABS ISO 8833)

(SABS ISO 8914)

Page 157

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 8968-1:2006/ISO 8968-1 IDF 20-1:2001, IDT, Ed. 1

1

Milk - Determination of nitrogen content Part 1: Kjeldahl method

SANS 8968-2:2006/ISO 8968-2 IDF 20-2:2001, IDT, Ed. 1

1

Milk - Determination of nitrogen content Part 2: Block-digestion method (Macro method)

SANS 8968-4:2006/ISO 8968-4 IDF 20-4:2001, IDT, Ed. 1

1

Milk - Determination of nitrogen content Part 4: Determination of non-protein-nitrogen content

SANS 8968-5:2006/ISO 8968-5 IDF 20-5:2001, IDT, Ed. 1

1

Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content

SANS 9000:2005/ISO 9000:2005, IDT, Ed. 3

3

Quality management systems - Fundamentals and vocabulary

SANS 9001:2008/ISO 9001:2008, IDT, Ed. 4 (SABS ISO 9001)

4

Quality management systems - Requirements

SANS 9004:2010/ISO 9004:2009, IDT, Ed. 3

3

Managing for the sustained success of an organization - A quality management approach

SANS 9013:2006/ISO 9013:2002, IDT, Ed. 2 (SABS ISO 9013)

2

Thermal cutting - Classification of thermal cuts Geometrical product specification and quality tolerances

SANS 9048:1987/ISO 9048:1987, IDT, Ed. 1

1

Building construction - Jointing products Determination of extrudability of sealants using standardized apparatus

SANS 9080:2004/ISO 9080:2003, IDT, Ed. 1

1

Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

SANS 9090:1989/ISO 9090:1989, IDT, Ed. 1 (SABS ISO 9090)

1

Gas tightness of equipment for gas welding and allied processes

SANS 9093-1:2008/ISO 9093-1:1994, IDT, Ed. 1

1

Small craft - Seacocks and through-hull fittings Part 1: Metallic

SANS 9093-2:2008/ISO 9093-2:2002, IDT, Ed. 1

1

Small craft - Seacocks and through-hull fittings Part 2: Non-metallic

SANS 9094-1:2008/ISO 9094-1:2003, IDT, Ed. 1

1

Small craft - Fire protection Part 1: Craft with a hull length of up to and including 15 m

SANS 9094-2:2008/ISO 9094-2:2002, IDT, Ed. 1

1

Small craft - Fire protection Part 2: Craft with a hull length of over 15 m

SANS 9097:2008/ISO 9097:1991, IDT, Ed. 1

1

Small craft - Electric fans

SANS 9117:1990/ISO 9117:1990, IDT, Ed. 1 (SABS ISO 9117)

1

Paints and varnishes - Determination of through-dry state and through-dry time - Method of test

(SABS ISO 9000)

(SABS ISO 9004)

(SABS ISO 9048)

SANS 9126-1:2003/ISO/IEC 9126-1:2001, IDT, Ed. 1 1

Software engineering - Product quality Part 1: Quality model

1

Software engineering - Product quality Part 2: External metrics

SANS 9126-2:2004/ISO/IEC TR 9126-2:2003, IDT, Ed. 1

Page 158

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 9126-3:2004/ISO/IEC TR 9126-3:2003, IDT, Ed. 1

1

Software engineering - Product quality Part 3: Internal metrics

SANS 9126-4:2004/ISO/IEC TR 9126-4:2004, IDT, Ed. 1

1

Software engineering - Product quality Part 4: Quality in use metrics

SANS 9127:1988/ISO 9127:1988, IDT, Ed. 1

1

Information processing systems - User documentation and cover information for consumer software packages

SANS 9147:1987/ISO 9147:1987, IDT, Ed. 1 (SABS ISO 9147)

1

Pig-irons - Definition and classification

SANS 9177-1:1989/ISO 9177-1:1989, IDT, Ed. 1

1

Mechanical pencils Part 1: Classification, dimensions, performance requirements and testing

SANS 9177-2:1989/ISO 9177-2:1989, IDT, Ed. 1 (SABS ISO 9177-2)

1

Mechanical pencils Part 2: Black leads Classification and dimensions

SANS 9177-3:2009/ISO 9177-3:1994, IDT, Ed. 1

1

Mechanical pencils Part 3: Black leads - Bending strengths of HB leads

SANS 9180:2009/ISO 9180:1988, IDT, Ed. 1

1

Black leads for wood-cased pencils - Classification and diameters

SANS 9187-1:2007/ISO 9187-1:2006, IDT, Ed. 3

1

Injection equipment for medical use Part 1: Ampoules for injectables

SANS 9222-1:2006/ISO 9222-1:1989, IDT, Ed. 1

1

Technical drawings - Seals for dynamic application Part 1: General simplified representation

SANS 9227:2007/ISO 9227:2006, IDT, Ed. 2

2

Corrosion tests in artificial atmospheres - Salt spray tests

SANS 9230:2009/ISO 9230:2007, IDT, Ed. 2

1

Information and documentation - Determination of price indexes for print and electronic media purchased by libraries

SANS 9272:2003/ISO/TR 9272:1986, IDT, Ed. 1

1

Rubber and rubber products - Determination of precision for test method standards

SANS 9294:2007/ISO/IEC TR 9294:2005, IDT, Ed. 2 (SABS ISO/IEC TR 9294)

2

Information technology - Guidelines for the management of software documentation

SANS 9297:2007

1

Water quality - Determination of chloride - Silver nitrate titration with chromate indicator (Mohr's method)

SANS 9308-1:2004/ISO 9308-1:2000, IDT, Ed. 2

1

Water quality - Detection and enumeration of Escherichia coli and coliform bacteria Part 1: Membrane filtration method

SANS 9308-2:2004/ISO 9308-2:1990, IDT, Ed. 1

1

Water quality - Detection and enumeration of coliform organisms, thermotolerant coliform organisms and presumptive Escherichia coli Part 2: Multiple tube (most probable number) method

SANS 9308-3:2004/ISO 9308-3:1998, IDT, Ed. 1

1

Water quality - Detection and enumeration of Escherichia coli and coliform bacteria Part 3: Miniaturized method (Most Probable Number) for the detection and enumeration of E. coli in surface and waste water

SANS 9312:1990/ISO 9312:1990, IDT, Ed. 1

1

Resistance welding equipment - Insulated pins for use in electrode back-ups

(SABS ISO 9127)

(SABS ISO 9177-1)

(SABS ISO 9227)

(SABS ISO 9312)

Page 159

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 9313:1989/ISO 9313:1989, IDT, Ed. 1 (SABS ISO 9313)

1

Resistance spot welding equipment - Cooling tubes

SANS 9349:2010/ISO 9349:2004, IDT, Ed. 2

1

Preinsulated ductile iron pipeline systems

SANS 9364:2007/ISO 9364:2006, IDT, Ed. 3 (SABS ISO 9364)

2

Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities

SANS 9373:2007/ISO 9373:1989, IDT, Ed. 1

1

Cranes and related equipment - Accuracy requirements for measuring parameters during testing

SANS 9374-1:2002/ISO 9374-1:1989, IDT, Ed. 1

1

Cranes - Information to be provided Part 1: General

SANS 9374-3:2007/ISO 9374-3:2002, IDT, Ed. 1

1

Cranes - Information to be provided for enquiries, orders, offers and supply Part 3: Tower cranes

SANS 9408:1999/ISO 9408:1999, IDT, Ed. 2 (SABS ISO 9408)

1

Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer

SANS 9454-1:1990/ISO 9454-1:1990, IDT, Ed. 1 (SABS ISO 9454-1)

1

Soft soldering fluxes - Classification and requirements Part 1: Classification, labelling and packaging

SANS 9454-2:1998/ISO 9454-2:1998, IDT, Ed. 1

1

Soft soldering fluxes - Classification and requirements Part 2: Performance requirements

SANS 9455-1:1990/ISO 9455-1:1990, IDT, Ed. 1 (SABS ISO 9455-1)

1

Soft soldering fluxes - Test methods Part 1: Determination of non-volatile matter, gravimetric method

SANS 9455-2:1993/ISO 9455-2:1993, IDT, Ed. 1

1

Soft soldering fluxes - Test methods Part 2: Determination of non-volatile matter, ebulliometric method

SANS 9455-3:1992/ISO 9455-3:1992, IDT, Ed. 1 (SABS ISO 9455-3)

1

Soft soldering fluxes - Test methods Part 3: Determination of acid value, potentiometric and visual titration methods

SANS 9455-5:1992/ISO 9455-5:1992, IDT, Ed. 1

1

Soft soldering fluxes - Test methods Part 5: Copper mirror test

SANS 9455-6:1995/ISO 9455-6:1995, IDT, Ed. 1 (SABS ISO 9455-6)

1

Soft soldering fluxes - Test methods Part 6: Determination and detection of halide (excluding fluoride) content

SANS 9455-8:1991/ISO 9455-8:1991, IDT, Ed. 1

1

Soft soldering fluxes - Test methods Part 8: Determination of zinc content

SANS 9455-9:1993/ISO 9455-9:1993, IDT, Ed. 1 (SABS ISO 9455-9)

1

Soft soldering fluxes - Test methods Part 9: Determination of ammonia content

SANS 9455-10:1998/ISO 9455-10:1998, IDT, Ed. 1

1

Soft soldering fluxes - Test methods Part 10: Flux efficacy tests, solder spread method

SANS 9455-11:1991/ISO 9455-11:1991, IDT, Ed. 1 (SABS ISO 9455-11)

1

Soft soldering fluxes - Test methods Part 11: Solubility of flux residues

SANS 9455-12:1992/ISO 9455-12:1992, IDT, Ed. 1

1

Soft soldering fluxes - Test methods Part 12: Steel tube corrosion test

1

Soft soldering fluxes - Test methods Part 13: Determination of flux splattering

(SABS ISO 9454-2)

(SABS ISO 9455-2)

(SABS ISO 9455-5)

(SABS ISO 9455-8)

(SABS ISO 9455-10)

(SABS ISO 9455-12) SANS 9455-13:1996/ISO 9455-13:1996, IDT, Ed. 1 (SABS ISO 9455-13)

Page 160

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 9455-14:1991/ISO 9455-14:1991, IDT, Ed. 1 (SABS ISO 9455-14)

1

Soft soldering fluxes - Test methods Part 14: Assessment of tackiness of flux residues

SANS 9455-15:1996/ISO 9455-15:1996, IDT, Ed. 1

1

Soft soldering fluxes - Test methods Part 15: Copper corrosion test

SANS 9455-16:1998/ISO 9455-16:1998, IDT, Ed. 1 (SABS ISO 9455-16)

1

Soft soldering fluxes - Test methods Part 16: Flux efficacy tests, wetting balance method

SANS 9455-17:2009/ISO 9455-17:2002, IDT, Ed. 1

1

Soft soldering fluxes - Test methods Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues

SANS 9539:1988/ISO 9539:1988, IDT, Ed. 1 (SABS ISO 9539)

1

Materials for equipment used in gas welding, cutting and allied processes

SANS 9606-1:1994/ISO 9606-1:1994, IDT, Ed. 1

1

Approval testing of welders - Fusion welding Part 1: Steels

SANS 9606-2:2006/ISO 9606-2:2004, IDT, Ed. 2 (SABS ISO 9606-2)

2

Qualification test of welders - Fusion welding Part 2: Aluminium and aluminium alloys

SANS 9614-1:1993/ISO 9614-1:1993, IDT, Ed. 1

1

Acoustics - Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points

SANS 9614-2:1996/ISO 9614-2:1996, IDT, Ed. 1 (SABS ISO 9614-2)

1

Acoustics - Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning

SANS 9614-3:2005/ISO 9614-3:2002, IDT, Ed. 1

1

Acoustics - Determination of sound power levels of noise sources using sound intensity Part 3: Precision method for measurement by scanning

SANS 9622:2005/ISO 9622:1999, IDT, Ed. 1

1

Whole milk - Determination of milkfat, protein and lactose content - Guidance on the operation of midinfrared instruments

SANS 9628:2007/ISO 9628:2006, IDT, Ed. 2

2

Rolling bearings - Insert bearings and eccentric locking collars - Boundary dimensions and tolerances

SANS 9692-1:2007/ISO 9692-1:2003, IDT, Ed. 1

1

Welding and allied processes - Recommendations for joint preparation Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels

SANS 9692-2:2009/ISO 9692-2:1998, IDT, Ed. 1

1

Welding and allied processes - Joint preparation Part 2: Submerged arc welding of steels

SANS 9692-3:2009/ISO 9692-3:2000, IDT, Ed. 1

1

Welding and allied processes - Recommendations for joint preparation Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys

SANS 9692-4:2009/ISO 9692-4:2003, IDT, Ed. 1

1

Welding and allied processes - Recommendations for joint preparation Part 4: Clad steels

SANS 9706:2006/ISO 9706:1994, IDT, Ed. 1

1

Information and documentation - Paper for documents - Requirements for permanence

SANS 9707:2009/ISO 9707:2008, IDT, Ed. 2

1

Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications

SANS 9712:2009/ISO 9712:2005, IDT, Ed. 3

2

Non-destructive testing - Qualification and certification of personnel

(SABS ISO 9455-15)

(SABS ISO 9606-1)

(SABS ISO 9614-1)

(SABS ISO 9712)

Page 161

Standards available in electronic format (PDF) May

SANS Number SANS 9775:2008/ISO 9775:1990, IDT, Ed. 1

2010

Edition Title 1

Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power

SANS 9796-2:2007/ISO/IEC 9796-2:2002, IDT, Ed. 2 1

Information technology - Security techniques Digital signature schemes giving message recovery Part 2: Integer factorization based mechanisms

SANS 9796-3:2007/ISO/IEC 9796-3:2006, IDT, Ed. 2 1

Information technology - Security techniques Digital signature schemes giving message recovery Part 3: Discrete logarithm based mechanisms

SANS 9797-1:2003/ISO/IEC 9797-1:1999, IDT, Ed. 1 1

Information technology - Security techniques Message Authentication Codes (MACs) Part 1: Mechanisms using a block cipher

SANS 9797-2:2003/ISO/IEC 9797-2:2002, IDT, Ed. 1 1

Information technology - Security techniques Message Authentication Codes (MACs) Part 2: Mechanisms using a dedicated hash-function

SANS 9798-1:2003/ISO/IEC 9798-1:1997, IDT, Ed. 2 1

Information technology - Security techniques - Entity authentication Part 1: General

SANS 9798-2:2009/ISO/IEC 9798-2:2008, IDT, Ed. 3 2

Information technology - Security techniques - Entity authentication Part 2: Mechanisms using symmetric encipherment algorithms

SANS 9798-3:2003/ISO/IEC 9798-3:1998, IDT, Ed. 2 1

Information technology - Security techniques - Entity authentication Part 3: Mechanisms using digital signature techniques

SANS 9798-4:2003/ISO/IEC 9798-4:1999, IDT, Ed. 2 1

Information technology - Security techniques - Entity authentication Part 4: Mechanisms using a cryptographic check function

SANS 9798-5:2006/ISO/IEC 9798-5:2004, IDT, Ed. 2 2

Information technology - Security techniques - Entity authentication Part 5: Mechanisms using zeroknowledge techniques

SANS 9798-6:2007/ISO/IEC 9798-6:2005, IDT, Ed. 1 1

Information technology - Security techniques - Entity authentication Part 6: Mechanisms using manual data transfer

SANS 9809-1:1999/ISO 9809-1:1999, IDT, Ed. 1

1

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa

1

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa

SANS 9809-3:2000/ISO 9809-3:2000, IDT, Ed. 1 (SABS ISO 9809-3)

1

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing Part 3: Normalized steel cylinders

SANS 9852:2008/ISO 9852:2007, IDT, Ed. 2

2

Unplasticized poly(vinyl chloride) (PVC-U) pipes Dichloromethane resistance at specified temperature (DCMT) - Test method

SANS 9854-1:1994/ISO 9854-1:1994, IDT, Ed. 1 (SABS ISO 9854-1)

1

Thermoplastics pipes for the transport of fluids Determination of pendulum impact strength by the Charpy method Part 1: General test method

SANS 9854-2:1994/ISO 9854-2:1994, IDT, Ed. 1

1

Thermoplastics pipes for the transport of fluids Determination of pendulum impact strength by the Charpy method Part 2: Test conditions for pipes of various materials

1

Textiles - Effect of dry heat on fabrics under low pressure Part 1: Procedure for dry-heat treatment of fabrics

(SABS ISO 9809-1)

SANS 9809-2:2000/ISO 9809-2:2000, IDT, Ed. 1 (SABS ISO 9809-2)

(SABS ISO 9852)

(SABS ISO 9854-2)

SANS 9866-1:2003/ISO 9866-1:1991, IDT, Ed. 1

Page 162

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 9866-2:2003/ISO 9866-2:1991, IDT, Ed. 1

1

Textiles - Effect of dry heat on fabrics under low pressure Part 2: Determination of dimensional change in fabrics exposed to dry heat

SANS 9926-1:2006/ISO 9926-1:1990, IDT, Ed. 1

1

Cranes - Training of drivers Part 1: General

SANS 9926-3:2007/ISO 9926-3:2005, IDT, Ed. 1

1

Cranes - Training of drivers Part 3: Tower cranes

SANS 9928-1:2006/ISO 9928-1:1990, IDT, Ed. 1

1

Cranes - Crane driving manual Part 1: General

SANS 9931:1991/ISO 9931:1991, IDT, Ed. 1 (SABS ISO 9931)

1

Coal - Sampling of pulverized coal conveyed by gases in direct fired coal systems

SANS 9933:1995/ISO 9933:1995, IDT, Ed. 1

1

Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding

SANS 9934-1:2004/ISO 9934-1:2001, IDT, Ed. 1

1

Non-destructive testing - Magnetic particle testing Part 1: General principles

SANS 9942-3:2007/ISO 9942-3:1999, IDT, Ed. 1

1

Cranes - Information labels Part 3: Tower cranes

SANS 9992-2:1998/ISO 9992-2:1998, IDT, Ed. 1 (SABS ISO 9992-2)

1

Financial transaction cards - Messages between the integrated circuit card and the card accepting device Part 2: Functions, messages (commands and responses), data elements and structures

SANS 9994:2008/ISO 9994:2005, IDT, Ed. 4 (SABS ISO 9994)

3

Lighters - Safety specification

SANS 9998:2004/ISO 9998:1991, IDT, Ed. 1

1

Water quality - Practices for evaluating and controlling microbiological colony count media used in water quality tests

SANS 10001:2008/ISO 10001:2007, IDT, Ed. 1

1

Quality management - Customer satisfaction Guidelines for codes of conduct for organizations

SANS 10002:2005/ISO 10002:2004, IDT, Ed. 1

1

Quality management - Customer satisfaction Guidelines for complaints handling in organizations

SANS 10003:2008/ISO 10003:2007, IDT, Ed. 1

1

Quality management - Customer satisfaction Guidelines for dispute resolution external to organizations

SANS 10004:2005

4

Terms and definitions for textiles and textile merchandise

SANS 10005:2006 (SABS 05)

7.01

The preservative treatment of timber

SANS 10006:2006

3.01

Colour marking and identification of medical gas cylinders and anaesthetic apparatus

SANS 10007:2004/ISO 10007:2003, IDT, Ed. 2

1

Quality management systems - Guidelines for configuration management

SANS 10011:2007

4.01

Care-labelling of textile piece-goods, textile articles and clothing

4

The use of light metals in hazardous locations at mines

(SABS ISO 9933)

(SABS 04)

(SABS 06)

(SABS 011) SANS 10012:2004 (SABS 012)

Page 163

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10013-1:2006/ECE R24:1986, NEQ; ISO 1585:1982, NEQ (SABS 013-1)

4

The determination of performance (at net power) of internal combustion engines Part 1: Road vehicle internal combustion engines at sea level

SANS 10013-2:2006

3

The determination of performance (at net power) of internal combustion engines Part 2: Compression ignition engines at altitude

SANS 10013-3:2006/ECE R24:1986, NEQ (SABS 013-3)

2

The determination of performance (at net power) of internal combustion engines Part 3: Agricultural vehicle internal combustion engines at sea level

SANS 10014:2006/ISO 10014:2006, IDT, Ed. 1

1

Quality management - Guidelines for realizing financial and economic benefits

SANS 10015:1999/ISO 10015:1999, IDT, Ed. 1 (SABS ISO 10015)

1

Quality management - Guidelines for training

SANS 10019:2008

6

Transportable containers for compressed, dissolved and liquefied gases - Basic design, manufacture, use and maintenance

SANS 10021:2006 (SABS 021)

3.02

The waterproofing of buildings (including dampproofing and vapour barrier installation)

SANS 10034-1:2009/ISO 34-1:2004, IDT, Ed. 2

2

Rubber, vulcanized or thermoplastic - Determination of tear strength Part 1: Trouser, angle and crescent test pieces

SANS 10034-2:2009/ISO 34-2:2007, IDT, Ed. 2

2

Rubber, vulcanized or thermoplastic - Determination of tear strength Part 2: Small (Delft) test pieces

SANS 10037:2009/ISO 37:2005, IDT, Ed. 4

2

Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties

SANS 10043:2009 (SABS 043)

4.01

The installation of wood and laminate flooring

SANS 10044-1:2004

3

Welding Part 1: Glossary of terms

SANS 10044-2:2004 (SABS 044-2)

3

Welding Part 2: Symbols

SANS 10047:2009

6

The testing of motor vehicles for roadworthiness

SANS 10048:2009/ISO 48:2007, IDT, Ed. 4

2

Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)

SANS 10049:2001

3

Food hygiene management

SANS 10052:2007 (SABS 052)

1.02

The construction of strongrooms

SANS 10055-1:2003

1

ISO 9001: 2000 Process auditing Part 1: Concepts and application

SANS 10055-2:2003

1

ISO 9001:2000 Process auditing Part 2: ISO 9001 Process capability model and compliance indicators

SANS 10055-3:2003

1

ISO 9001: 2000 Process auditing Part 3: Generic process performance model and work products

(SABS 013-2)

(SABS 019)

(SABS 044-1)

(SABS 047)

(SABS 049)

Page 164

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10055-4:2003

1

ISO 9001: 2000 Process auditing Part 4: Process performance model and work products for information technology

SANS 10061-1:2008

3.03

The installation of communal and single antenna systems for the reception of television and sound broadcast transmissions Part 1: VHF and UHF television and VHF sound antenna systems

1.01

The installation of communal and single antenna systems for the reception of television and sound broadcast transmissions Part 2: Satellite antenna systems

SANS 10062:2003 (SABS 062)

2.02

Fixing of concrete interlocking roofing tiles

SANS 10064:2005

3

The preparation of steel surfaces for coating

SANS 10066:2007 (SABS 066)

3

Application of thermal process control to low-acid fish canning factories

SANS 10070:2007

3.02

The installation of resilient thermoplastic and similar flexible floor covering materials

SANS 10073:1974 (SABS 073)

2

The safe application of masonry-type facings to buildings

SANS 10076-1:2004

4

The assessment of defects in textile piece-goods and made-up articles Part 1: Defects in woven piece-goods (cellulosic and cellulosic blends)

SANS 10076-2:2004 (SABS 076-2)

2

The assessment of defects in textile piece-goods and made-up articles Part 2: Defects in woven terry towelling

SANS 10076-3:2004

2

The assessment of defects in textile piece-goods and made-up articles Part 3: Defects in woven ducks

SANS 10076-4:2004 (SABS 076-4)

2

The assessment of defects in textile piece-goods and made-up articles Part 4: Defects in knitted piece-goods

SANS 10076-5:2004

2

The assessment of defects in textile piece-goods and made-up articles Part 5: Defects in woven woollen and worsted piece-goods

SANS 10076-6:2004 (SABS 076-6)

2

The assessment of defects in textile piece-goods and made-up articles Part 6: Defects in woven filament piece-goods

SANS 10076-7:2004

2

The assessment of defects in textile piece-goods and made-up articles Part 7: Defects in household articles

SANS 10079:2008 (SABS 079)

2.01

The use, care and protection of grinding wheels

SANS 10080:2009

2.02

The rodentproofing of buildings

SANS 10082:2007 (SABS 082)

4

Timber frame buildings

SANS 10083:2004

5

The measurement and assessment of occupational noise for hearing conservation purposes

(SABS 061-1)

SANS 10061-2:2008 (SABS 061-2)

(SABS 064)

(SABS 070)

(SABS 076-1)

(SABS 076-3)

(SABS 076-5)

(SABS 076-7)

(SABS 080)

(SABS 083)

Page 165

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10085-1:2004

1.01

The design, erection, use and inspection of access scaffolding Part 1: Steel access scaffolding

SANS 10086-1:2003

3.03

The installation, inspection and maintenance of equipment used in explosive atmospheres Part 1: Installations including surface installations on mines

SANS 10086-2:2006

1

The installation, inspection and maintenance of equipment used in explosive atmospheres Part 2: Electrical apparatus installed underground in mines

SANS 10086-3:2001

1.01

The installation, inspection and maintenance of equipment used in explosive atmospheres Part 3: Repair and overhaul of apparatus used in explosive atmospheres

5

The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial, and industrial installations Part 1: Liquefied petroleum gas installations involving gas storage containers of individual water capacity not exceeding 500 L and a combined water capacity not exceeding 3 000 L per installation

SANS 10087-2:1977 (SABS 087-2)

2

The handling, storage, and distribution of liquefied petroleum gas in domestic, commercial, and industrial installations Part 2: Installations in mobile units and small non-permanent buildings

SANS 10087-3:2008 (SABS 087-3)

4

The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial, and industrial installations Part 3: Liquefied petroleum gas installations involving storage vessels of individual water capacity exceeding 500 L

SANS 10087-4:1979 (SABS 087-4)

2

The handling, storage, and distribution of liquefied petroleum gas in domestic, commercial, and industrial installations Part 4: Transportation of LPG in bulk by road

SANS 10087-6:2006 (SABS 087-6)

4.01

The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial, and industrial installations Part 6: The application of liquefied petroleum and compressed natural gases as engine fuels for internal combustion engines

SANS 10087-7:2007 (SABS 087-7)

3

The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial, and industrial installations Part 7: Storage and filling premises for refillable liquefied petroleum gas (LPG) containers of gas capacity not exceeding 9 kg and the storage of individual gas containers not exceeding 48 kg.

SANS 10087-8:1976 (SABS 087-8)

1

The handling, storage, and distribution of liquefied petroleum gas in domestic, commercial, and industrial installations Part 8: The fuelling of fork lift trucks and other LP gas operated vehicles

SANS 10087-10:2006 (SABS 087-10)

1.01

The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial and industrial installations Part 10: Mobile filling stations for refillable liquefied petroleum gas (LPG) containers of capacity not exceeding 9 kg

SANS 10089-1:2008 (SABS 089-1)

4.03

The petroleum industry Part 1: Storage and distribution of petroleum products in above-ground bulk installations

(SABS 086-1)

(SABS 086-3)

SANS 10087-1:2008 (SABS 087-1)

Page 166

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10089-2:2007 (SABS 089-2)

3

The petroleum industry Part 2: Electrical and other installations in the distribution and marketing sector

SANS 10089-3:1999

3

The petroleum industry Part 3: The installation of underground storage tanks, pumps/dispensers and pipework at service stations and consumer installations

3

Community protection against fire

SANS 10091:2009 (SABS 091)

2.03

The safe working of power-driven woodworking machinery

SANS 10092:2004

3

Caravan parks

SANS 10094:2005 (SABS 094)

4

The use of high-strength friction-grip bolts

SANS 10096:2009

2.05

The manufacture of finger-jointed structural timber

SANS 10098-1:2007 (SABS 098-1)

3.03

Public lighting Part 1: The lighting of public thoroughfares

SANS 10098-2:2005

2

Public lighting Part 2: The lighting of certain specific areas of streets and highways

SANS 10100-1:2000 (SABS 0100-1)

2.02

The structural use of concrete Part 1: Design

SANS 10100-2:1992

2

The structural use of concrete Part 2: Materials and execution of work

SANS 10101:2008 (SABS 0101)

1.01

Standard nomenclature for stitches, seams, and stitchings

SANS 10102-1:2005

2.01

The selection of pipes for buried pipelines Part 1: General provisions

SANS 10102-2:1987 (SABS 0102-2)

2

Selection of pipes for buried pipelines Part 2: Rigid pipes

SANS 10103:2008

6

The measurement and rating of environmental noise with respect to annoyance and to speech communication

SANS 10104:1991 (SABS 0104)

2

Handrailing and balustrading (safety aspects)

SANS 10105-1:2010

3.01

The use and control of fire-fighting equipment Part 1: Portable and wheeled (mobile) fire extinguishers

SANS 10105-2:2010 (SABS 0105-2)

3.01

The use and control of fire-fighting equipment Part 2: Fire hose reels and above-ground hydrants

SANS 10106:2006

3

The installation, maintenance, repair and replacement of domestic solar water heating systems

2

The design and installation of ceramic tiling

(SABS 089-3)

SANS 10090:2003 (SABS 090)

(SABS 092)

(SABS 096)

(SABS 098-2)

(SABS 0100-2)

(SABS 0102-1)

(SABS 0103)

(SABS 0105-1)

(SABS 0106) SANS 10107:1996 (SABS 0107)

Page 167

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10108:2005 (SABS 0108)

5

The classification of hazardous locations and the selection of apparatus for use in such locations

SANS 10109-1:2009

3

Concrete floors Part 1: Bases to concrete floors

SANS 10109-2:2004 (SABS 0109-2)

3

Concrete floors Part 2: Finishes to concrete floors

SANS 10111-1:1993

3.01

Engineering drawing Part 1: General principles

SANS 10111-2-1:2007/ISO 1101:2004, IDT, Ed. 2 (SABS 0111-2-1)

2

Engineering drawing Part 2: Geometrical tolerancing Section 1: Tolerancing of form, orientation, location and run-out - Generalities, definitions, symbols, indications on drawings

SANS 10111-2-2:1993/ISO 5459:1981, IDT, Ed. 1 (SABS 0111-2-2)

1

Engineering drawing Part 2: Geometrical tolerancing Section 2: Datums and datum-systems for geometrical tolerances

SANS 10111-2-3:2008/ISO 2692:2006, IDT, Ed. 2

2

Geometrical product specifications (GPS) Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)

SANS 10111-2-4:2005/ISO 5458:1998, IDT, Ed. 2 (SABS 0111-2-4)

2

Geometrical Product Specifications (GPS) Geometrical tolerancing - Positional tolerancing

SANS 10111-2-5:1993/ISO 8015:1985, IDT, Ed. 1

1

Engineering drawing Part 2: Geometrical tolerancing Section 5: Fundamental tolerancing principle

(SABS 0109-1)

(SABS 0111-1)

(SABS 0111-2-3)

(SABS 0111-2-5) SANS 10111-3:1993/ISO/TR 5460:1985, MOD, Ed. 1 1 (SABS 0111-3)

Engineering drawing Part 3: Guidelines for the interpretation and verification methods of geometrical tolerancing

SANS 10112:2003

2.01

The installation of polyethylene and poly(vinyl chloride)(PVC-U and PVC-M) pipes

SANS 10114-1:2005 (SABS 0114-1)

3

Interior lighting Part 1: Artificial lighting of interiors

SANS 10114-2:2009

1.02

Interior lighting Part 2: Emergency lighting

SANS 10117:2008 (SABS 0117)

2.02

Calculation and prediction of aircraft noise around airports for land use purposes

SANS 10118:2009

3

The aerial application of pesticides

SANS 10119:2001 (SABS 0119)

2.01

Reduction of explosion hazards presented by electrical equipment - Segregation, ventilation and pressurization

SANS 10120-1:1986

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 1: Format and contents

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification, Introduction

(SABS 0112)

(SABS 0114-2)

(SABS 0118)

(SABS 0120-1) SANS 10120-2 INTRO:1986 (SABS 0120-2 INTRO)

Page 168

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10120-2 A:1986 (SABS 0120-2 A)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section A: General

SANS 10120-2 AA:1986 (SABS 0120-2 AA)

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AA: General (small works)

SANS 10120-2 AB:1986

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AB: Engineer's office

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AD: General (small dams)

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AH: General (structural)

SANS 10120-2 C:1982 (SABS 0120-2 C)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section C: Site clearance

SANS 10120-2 D:1982 (SABS 0120-2 D)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section D: Earthworks

SANS 10120-2 DA:1982 (SABS 0120-2 DA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DA: Earthworks (small works)

SANS 10120-2 DB:1982

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DB: Earthworks (pipe trenches)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DE: Small earth dams

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DK: Gabions and pitching

SANS 10120-2 DM:1981 (SABS 0120-2 DM)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DM: Earthworks (roads, subgrade)

SANS 10120-2 DN:1982 (SABS 0120-2 DN)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DN: Earthworks (railway sidings)

SANS 10120-2 F:1983 (SABS 0120-2 F)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section F: Piling

(SABS 0120-2 AB)

SANS 10120-2 AD:1986 (SABS 0120-2 AD)

SANS 10120-2 AH:1986 (SABS 0120-2 AH)

(SABS 0120-2 DB)

SANS 10120-2 DE:1984 (SABS 0120-2 DE)

SANS 10120-2 DK:1996 (SABS 0120-2 DK)

Page 169

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10120-2 G:1982 (SABS 0120-2 G)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section G: Concrete (structural)

SANS 10120-2 GA:1982 (SABS 0120-2 GA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GA: Concrete (small works)

SANS 10120-2 GB:1984

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GB: Concrete (ordinary buildings)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GE: Precast concrete (structural)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GF: Prestressed concrete

SANS 10120-2 H:1990 (SABS 0120-2 H)

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification H: Structural steelwork

SANS 10120-2 HA:1990 (SABS 0120-2 HA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification HA: Structural steelwork (sundry items)

SANS 10120-2 HB:1985 (SABS 0120-2 HB)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section HB: Cladding and sheeting

SANS 10120-2 HC:1988

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section HC: Corrosion protection of structural steelwork

SANS 10120-2 HE:1983 (SABS 0120-2 HE)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section HE: Structural aluminiumwork

SANS 10120-2 L:1983

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section L: Medium-pressure pipelines

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LB: Bedding (pipes)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LC: Cable ducts

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LD: Sewers

(SABS 0120-2 GB)

SANS 10120-2 GE:1984 (SABS 0120-2 GE)

SANS 10120-2 GF:1984 (SABS 0120-2 GF)

(SABS 0120-2 HC)

(SABS 0120-2 L)

SANS 10120-2 LB:1983 (SABS 0120-2 LB)

SANS 10120-2 LC:1981 (SABS 0120-2 LC)

SANS 10120-2 LD:1982 (SABS 0120-2 LD)

Page 170

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10120-2 LE:1982 (SABS 0120-2 LE)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LE: Stormwater drainage

SANS 10120-2 LF:1983 (SABS 0120-2 LF)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LF: Erf connections (water)

SANS 10120-2 LG:1983

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LG: Pipe jacking

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section M: Roads (general)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section ME: Subbase

SANS 10120-2 MF:1981 (SABS 0120-2 MF)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MF: Base

SANS 10120-2 MFL:1996 (SABS 0120-2 MFL)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MFL: Base (light pavement structures)

SANS 10120-2 MG:1996 (SABS 0120-2 MG)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MG: Bituminous surface treatment

SANS 10120-2 MH:1996

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MH: Asphalt base and surfacing

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MJ: Segmented paving

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MK: Kerbing and channeling

SANS 10120-2 MM:1984 (SABS 0120-2 MM)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MM: Ancillary roadworks

SANS 10120-2 NB:1981 (SABS 0120-2 NB)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section NB: Railway sidings (trackwork)

SANS 10120-3 INTRO:1986 (SABS 0120-3 INTRO)

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design, Introduction

(SABS 0120-2 LG)

SANS 10120-2 M:1996 (SABS 0120-2 M)

SANS 10120-2 ME:1981 (SABS 0120-2 ME)

(SABS 0120-2 MH)

SANS 10120-2 MJ:1984 (SABS 0120-2 MJ)

SANS 10120-2 MK:1983 (SABS 0120-2 MK)

Page 171

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10120-3 A:1986 (SABS 0120-3 A)

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section A: General

SANS 10120-3 AA:1982 (SABS 0120-3 AA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AA: General (small works)

SANS 10120-3 AB:1986

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AB: Engineer's office

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AD: General (small dams)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AH: General (structural)

SANS 10120-3 C:1982 (SABS 0120-3 C)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section C: Site clearance

SANS 10120-3 D:1982 (SABS 0120-3 D)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section D: Earthworks

SANS 10120-3 DA:1982 (SABS 0120-3 DA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DA: Earthworks (small works)

SANS 10120-3 DB:1982

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DB: Earthworks (pipe trenches)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DE: Small earth dams

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DK: Gabions and pitching

SANS 10120-3 DM:1981 (SABS 0120-3 DM)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DM: Earthworks (roads, subgrade)

SANS 10120-3 DN:1982 (SABS 0120-3 DN)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DN: Earthworks (railway sidings)

SANS 10120-3 F:1983 (SABS 0120-3 F)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section F: Piling

(SABS 0120-3 AB)

SANS 10120-3 AD:1986 (SABS 0120-3 AD)

SANS 10120-3 AH:1983 (SABS 0120-3 AH)

(SABS 0120-3 DB)

SANS 10120-3 DE:1984 (SABS 0120-3 DE)

SANS 10120-3 DK:1996 (SABS 0120-3 DK)

Page 172

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10120-3 G:1982 (SABS 0120-3 G)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section G: Concrete (structural)

SANS 10120-3 GA:1982 (SABS 0120-3 GA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GA: Concrete (small works)

SANS 10120-3 GB:1984

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GB: Concrete (ordinary buildings)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GE: Precast concrete (structural)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GF: Prestressed concrete

SANS 10120-3 H:1990 (SABS 0120-3 H)

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section H: Structural steelwork

SANS 10120-3 HA:1990 (SABS 0120-3 HA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HA: Structural steelwork (sundry items)

SANS 10120-3 HB:1985 (SABS 0120-3 HB)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HB: Cladding and sheeting

SANS 10120-3 HC:1988

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HC: Corrosion protection of structural steelwork

SANS 10120-3 HE:1983 (SABS 0120-3 HE)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HE: Structural aluminiumwork

SANS 10120-3 L:1983

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section L: Medium-pressure pipelines

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LB: Bedding (pipes)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LC: Cable ducts

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LD: Sewers

(SABS 0120-3 GB)

SANS 10120-3 GE:1984 (SABS 0120-3 GE)

SANS 10120-3 GF:1984 (SABS 0120-3 GF)

(SABS 0120-3 HC)

(SABS 0120-3 L)

SANS 10120-3 LB:1983 (SABS 0120-3 LB)

SANS 10120-3 LC:1981 (SABS 0120-3 LC)

SANS 10120-3 LD:1982 (SABS 0120-3 LD)

Page 173

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10120-3 LE:1982 (SABS 0120-3 LE)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LE: Stormwater drainage

SANS 10120-3 LF:1983 (SABS 0120-3 LF)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LF: Erf connections (water)

SANS 10120-3 LG:1983

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LG: Pipe jacking

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section M: Roads (general)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section ME: Subbase

SANS 10120-3 MF:1981 (SABS 0120-3 MF)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MF: Base

SANS 10120-3 MFL:1996 (SABS 0120-3 MFL)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MFL: Base (light pavement structures)

SANS 10120-3 MG:1996 (SABS 0120-3 MG)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MG: Bituminous surface treatment

SANS 10120-3 MH:1996

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MH: Asphalt base and surfacing

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MJ: Segmented paving

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MK: Kerbing and channeling

SANS 10120-3 MM:1984 (SABS 0120-3 MM)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MM: Ancillary roadworks

SANS 10120-3 NB:1981 (SABS 0120-3 NB)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section NB: Railway sidings (trackwork)

SANS 10120-4 INTRO:1986 (SABS 0120-4 INTRO)

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities, Introduction

(SABS 0120-3 LG)

SANS 10120-3 M:1996 (SABS 0120-3 M)

SANS 10120-3 ME:1981 (SABS 0120-3 ME)

(SABS 0120-3 MH)

SANS 10120-3 MJ:1984 (SABS 0120-3 MJ)

SANS 10120-3 MK:1983 (SABS 0120-3 MK)

Page 174

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10120-4 A:1986 (SABS 0120-4 A)

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section A: General

SANS 10120-4 AA:1982 (SABS 0120-4 AA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AA: General (small works)

SANS 10120-4 AB:1982

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AB: Engineer's office

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AD: General (small dams)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AH: General (structural)

SANS 10120-4 C:1982 (SABS 0120-4 C)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section C: Site clearance

SANS 10120-4 D:1982 (SABS 0120-4 D)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section D: Earthworks

SANS 10120-4 DA:1982 (SABS 0120-4 DA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DA: Earthworks (small works)

SANS 10120-4 DB:1982

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DB: Earthworks (pipe trenches)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DE: Small earth dams

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DK: Gabions and pitching

SANS 10120-4 DM:1981 (SABS 0120-4 DM)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DM: Earthworks (roads, subgrade)

SANS 10120-4 DN:1982

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DN: Earthworks (railway sidings)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section F: Piling

(SABS 0120-4 AB)

SANS 10120-4 AD:1984 (SABS 0120-4 AD)

SANS 10120-4 AH:1983 (SABS 0120-4 AH)

(SABS 0120-4 DB)

SANS 10120-4 DE:1984 (SABS 0120-4 DE)

SANS 10120-4 DK:1984 (SABS 0120-4 DK)

(SABS 0120-4 DN)

SANS 10120-4 F:1983 (SABS 0120-4 F)

Page 175

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10120-4 G:1982 (SABS 0120-4 G)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section G: Concrete (structural)

SANS 10120-4 GA:1982 (SABS 0120-4 GA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section GA: Concrete (small works)

SANS 10120-4 GB:1984

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section GB: Concrete (ordinary buildings)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section GE: Precast concrete (structural)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section GF: Prestressed concrete

SANS 10120-4 H:1990 (SABS 0120-4 H)

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section H: Structural steelwork

SANS 10120-4 HA:1990 (SABS 0120-4 HA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HA: Structural steelwork (sundry items)

SANS 10120-4 HB:1985 (SABS 0120-4 HB)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HB: Cladding and sheeting

SANS 10120-4 HC:1988 (SABS 0120-4 HC)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HC: Corrosion protection of structural steelwork

SANS 10120-4 HE:1983 (SABS 0120-4 HE)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HE: Structural alumuniumwork

SANS 10120-4 L:1983 (SABS 0120-4 L)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section L: Medium-pressure pipelines

SANS 10120-4 LB:1983 (SABS 0120-4 LB)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LB: Bedding (pipes)

SANS 10120-4 LC:1981 (SABS 0120-4 LC)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LC: Cable ducts

SANS 10120-4 LD:1982

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LD: Sewers

(SABS 0120-4 GB)

SANS 10120-4 GE:1984 (SABS 0120-4 GE)

SANS 10120-4 GF:1984 (SABS 0120-4 GF)

(SABS 0120-4 LD)

Page 176

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10120-4 LE:1982 (SABS 0120-4 LE)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LE: Stormwater drainage

SANS 10120-4 LF:1983 (SABS 0120-4 LF)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LF: Erf connections (water)

SANS 10120-4 LG:1983

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LG: Pipe jacking

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section M: Roads (general)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section ME: Subbase

SANS 10120-4 MF:1981 (SABS 0120-4 MF)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MF: Base

SANS 10120-4 MFL:1996 (SABS 0120-4 MFL)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedules of quantities Section MFL: Base (light pavement structures)

SANS 10120-4 MG:1981 (SABS 0120-4 MG)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MG: Bituminous surface treatment

SANS 10120-4 MH:1981 (SABS 0120-4 MH)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MH: Asphalt base and surfacing

SANS 10120-4 MJ:1984 (SABS 0120-4 MJ)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MJ: Segmented paving

SANS 10120-4 MK:1983

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MK: Kerbing and channelling

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MM: Ancillary roadworks

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section NB: Railway sidings (trackwork)

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration, Introduction

(SABS 0120-4 LG)

SANS 10120-4 M:1996 (SABS 0120-4 M)

SANS 10120-4 ME:1981 (SABS 0120-4 ME)

(SABS 0120-4 MK)

SANS 10120-4 MM:1984 (SABS 0120-4 MM)

SANS 10120-4 NB:1981 (SABS 0120-4 NB)

SANS 10120-5 INTRO:1986 (SABS 0120-5 INTRO)

Page 177

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10120-5 A:1986 (SABS 0120-5 A)

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section A: General

SANS 10120-5 AA:1982 (SABS 0120-5 AA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AA: General (small works)

SANS 10120-5 AB:1986

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AB: Engineer's office

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AD: General (small dams)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AH: General (structural)

SANS 10120-5 C:1982 (SABS 0120-5 C)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section C: Site clearance

SANS 10120-5 D:1982 (SABS 0120-5 D)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section D: Earthworks

SANS 10120-5 DA:1982 (SABS 0120-5 DA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DA: Earthworks (small works)

SANS 10120-5 DB:1982

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DB: Earthworks (pipe trenches)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DE: Small earth dams

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DK: Gabions and pitching

SANS 10120-5 DM:1981 (SABS 0120-5 DM)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DM: Earthworks (roads, subgrade)

SANS 10120-5 DN:1982 (SABS 0120-5 DN)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DN: Earthworks (railway sidings)

SANS 10120-5 F:1983 (SABS 0120-5 F)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section F: Piling

(SABS 0120-5 AB)

SANS 10120-5 AD:1986 (SABS 0120-5 AD)

SANS 10120-5 AH:1983 (SABS 0120-5 AH)

(SABS 0120-5 DB)

SANS 10120-5 DE:1984 (SABS 0120-5 DE)

SANS 10120-5 DK:1996 (SABS 0120-5 DK)

Page 178

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10120-5 G:1982 (SABS 0120-5 G)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section G: Concrete (structural)

SANS 10120-5 GA:1982 (SABS 0120-5 GA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GA: Concrete (small works)

SANS 10120-5 GB:1984

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GB: Concrete (ordinary buildings)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GE: Precast concrete (structural)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GF: Prestressed concrete

SANS 10120-5 H:1990 (SABS 0120-5 H)

3

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section H: Structural steelwork

SANS 10120-5 HA:1990 (SABS 0120-5 HA)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HA: Structural steelwork (sundry items)

SANS 10120-5 HB:1985 (SABS 0120-5 HB)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HB: Cladding and sheeting

SANS 10120-5 HC:1988

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HC: Corrosion protection of structural steelwork

SANS 10120-5 HE:1983 (SABS 0120-5 HE)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HE: Structural aluminiumwork

SANS 10120-5 L:1983

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section L: Medium-pressure pipelines

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LB: Bedding (pipes)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LC: Cable ducts

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LD: Sewers

(SABS 0120-5 GB)

SANS 10120-5 GE:1984 (SABS 0120-5 GE)

SANS 10120-5 GF:1984 (SABS 0120-5 GF)

(SABS 0120-5 HC)

(SABS 0120-5 L)

SANS 10120-5 LB:1983 (SABS 0120-5 LB)

SANS 10120-5 LC:1981 (SABS 0120-5 LC)

SANS 10120-5 LD:1982 (SABS 0120-5 LD)

Page 179

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10120-5 LE:1982 (SABS 0120-5 LE)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LE: Stormwater drainage

SANS 10120-5 LF:1983 (SABS 0120-5 LF)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LF: Erf connections (water)

SANS 10120-5 LG:1983

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LG: Pipe jacking

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section M: Roads (general)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section ME: Subbase

SANS 10120-5 MF:1981 (SABS 0120-5 MF)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MF: Base

SANS 10120-5 MFL:1996 (SABS 0120-5 MFL)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MFL: Base (light pavement structures)

SANS 10120-5 MG:1996 (SABS 0120-5 MG)

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MG: Bituminous surface treatment

SANS 10120-5 MH:1996

2

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MH: Asphalt base and surfacing

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MJ: Segmented paving

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MK: Kerbing and channelling

SANS 10120-5 MM:1984 (SABS 0120-5 MM)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MM: Ancillary roadworks

SANS 10120-5 NB:1981 (SABS 0120-5 NB)

1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section NB: Railway sidings (trackwork)

SANS 10121:1977 (SABS 0121)

1

Cathodic protection of buried and submerged structures

SANS 10123:2001

1.01

The control of undesirable static electricity

(SABS 0120-5 LG)

SANS 10120-5 M:1996 (SABS 0120-5 M)

SANS 10120-5 ME:1981 (SABS 0120-5 ME)

(SABS 0120-5 MH)

SANS 10120-5 MJ:1984 (SABS 0120-5 MJ)

SANS 10120-5 MK:1983 (SABS 0120-5 MK)

(SABS 0123)

Page 180

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10124:2006 (SABS 0124)

3.01

The application of soil insecticides for the protection of buildings

SANS 10125:2009

1.02

The installation of flexible membrane linings in earth embankment reservoirs

SANS 10129:2006 (SABS 0129)

1.01

Plastics tape wrapping of steel pipelines

SANS 10131:2004

1

Above-ground storage tanks for petroleum products

SANS 10132:2009 (SABS 0132)

2.02

The installation and operation of refrigerated milk tanks

SANS 10133:1977

1

The application of pesticides in food-handling, foodprocessing, and catering establishments

SANS 10134:2008 (SABS 0134)

1.02

The safeness of private swimming pools

SANS 10136:2007

2.01

The cleaning and disinfecting of dairy equipment and soft-serve dispensing units

SANS 10137:2002 (SABS 0137)

3.01

The installation of glazing in buildings

SANS 10139:2007/BS 5839-1:2002, MOD, Ed. 1

3.01

Fire detection and alarm systems for buildings System design, installation and servicing

SANS 10140-1:2008 (SABS 0140-1)

2.01

Identification colour marking Part 1: General

SANS 10140-2:2008

2.03

Identification colour marking Part 2: Identification of hazards and equipment in work situations

SANS 10140-3:2003 (SABS 0140-3)

3

Identification colour markings Part 3: Contents of pipelines

SANS 10140-4:2006

1.02

Identification colour marking Part 4: Contents of taps and valves in laboratories

SANS 10140-5:2010 (SABS 0140-5)

2.03

Identification colour marking Part 5: Coding of containers for carrying lubricants and associated fluids

SANS 10141:2007

3.01

The processing, testing and storage of silver-gelatin microfilm for archival purposes

SANS 10142-1:2009 (SABS 0142-1)

1.07

The wiring of premises Part 1: Low-voltage installations

SANS 10142-2:2009

1

The wiring of premises Part 2: Medium-voltage installations above 1 kV a.c. not exceeding 22 kV a.c. and up to and including 3 000 kW installed capacity

SANS 10143:1980

1

Building drawing practice

2

Detailing of steel reinforcement for concrete

(SABS 0125)

(SABS 0133)

(SABS 0136)

(SABS 0139)

(SABS 0140-2)

(SABS 0140-4)

(SABS 0141)

(SABS 0143) SANS 10144:1995 (SABS 0144)

Page 181

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10145:2000 (SABS 0145)

1.02

Concrete masonry construction

SANS 10146:2008

3

Laundry processes and management

SANS 10147:2009 (SABS 0147)

4.01

Refrigerating systems including plants associated with air-conditioning systems

SANS 10148:2003

1.01

The installation and operation of cable cranes and aerial rope-ways

SANS 10149:2008 (SABS 0149)

1.03

The mechanical stress grading of softwood timber (flexural method)

SANS 10153:2006

1

The labelling and marking of textiles and household textile articles

SANS 10154-1:2004 (SABS 0154-1)

1.02

Calibration of pure-tone audiometers Part 1: Air conduction

SANS 10154-2:2004

1.02

Calibration of pure-tone audiometers Part 2: Bone conduction

SANS 10155:2009 (SABS 0155)

1.02

Accuracy in buildings

SANS 10156:2007

1.01

The handling of chilled and frozen foods

SANS 10160:1989 (SABS 0160)

2

The general procedures and loadings to be adopted in the design of buildings

SANS 10161:1980

1

The design of foundations for buildings

SANS 10162-1:2005 (SABS 0162-1)

2

The structural use of steel Part 1: Limit-state design of hot-rolled steelwork

SANS 10162-2:1993/CAN/CSA S136-M89:1989, NEQ (SABS 0162-2)

1

The structural use of steel Part 2: Limit-states design of cold-formed steelwork

SANS 10162-4:1997 (SABS 0162-4)

1

Structural use of steel Part 4: The design of coldformed stainless steel structural members

SANS 10163-1:2003

2.03

The structural use of timber Part 1: Limit-states design

SANS 10163-2:2001 (SABS 0163-2)

1.01

The structural use of timber Part 2: Allowable stress design

SANS 10164-1:1980

1

The structural use of masonry Part 1: Unreinforced masonry walling

SANS 10164-2:2008 (SABS 0164-2)

1.02

The structural use of masonry Part 2: Structural design and requirements for reinforced and prestressed masonry

SANS 10166:2009

1.02

The overhaul of diesel fuel injection equipment

(SABS 0146)

(SABS 0148)

(SABS 0154-2)

(SABS 0156)

(SABS 0161)

(SABS 0163-1)

(SABS 0164-1)

(SABS 0166)

Page 182

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10167:2004 (SABS 0167)

1.01

The quality evaluation of fusion welded joints in steel structures

SANS 10168:2002/77/541/EEC:1977, MOD; 81/576/EEC:1981, MOD; 82/319/EEC:1982, MOD (SABS 0168)

1.01

The installation of restraining devices (safety belts) in motor vehicles (Incorporating part of EEC Directive 77/541 'Safety belts and restraint systems of motor vehicles', and the amending EEC Directives 81/576 and 82/319, with modifications)

SANS 10169:2004

1.01

Determining the performance of audible warning devices (hooters) after installation in a motor vehicle

SANS 10170:2004 (SABS 0170)

1.02

The cleaning and maintenance of floors

SANS 10173:2003

2

The installation, testing and balancing of airconditioning ductwork

SANS 10177-1:2005 (SABS 0177-1)

1.01

Fire testing of materials, components and elements used in buildings Part 1: General introduction to the methods of test

SANS 10177-2:2005

1.01

Fire testing of materials, components and elements used in buildings Part 2: Fire resistance test for building elements

SANS 10177-3:2005 (SABS 0177-3)

1.02

Fire-testing of materials, components and elements used in buildings Part 3: Surface fire index of finishing materials

SANS 10177-4:2005

1.03

Fire testing of materials, components and elements used in buildings Part 4: Surface fire index of floor coverings

SANS 10177-5:2007 (SABS 0177-5)

1.02

Fire testing of materials, components and elements used in buildings Part 5: Non-combustibility at 750 °C of building materials

SANS 10177-6:2005

1.01

Fire testing of materials, components and elements used in buildings Part 6: Non-combustibility at 300 °C of electrical insulation materials

SANS 10177-7:2005 (SABS 0177-7)

1.01

Fire testing of materials, components and elements used in buildings Part 7: Fire test for fire-check properties of building elements

SANS 10177-8:2006

1

Fire testing of materials, components and elements used in buildings Part 8: Surface burning characteristics of building materials

SANS 10177-9:2006

1

Fire testing of materials, components and elements used in buildings Part 9: Small-scale burning characteristics of building materials: ignition, flame spread and heat contribution

SANS 10177-10:2007

1.01

Fire testing of materials, components and elements used in buildings Part 10: Surface burning characteristics of building materials using the inverted channel tunnel test

SANS 10177-11:2007

1.01

Fire testing of materials, components and elements used in buildings Part 11: Large-scale fire performance evaluation of building envelope thermal insulation systems (with or without sprinklers)

SANS 10181:2003

1.06

The measurement of noise emitted by road vehicles when stationary

2.02

The measurement and assessment of acoustic environments for audiometric tests

(SABS 0169)

(SABS 0173)

(SABS 0177-2)

(SABS 0177-4)

(SABS 0177-6)

(SABS 0181) SANS 10182:2006 (SABS 0182)

Page 183

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10183:2000 (SABS 0183)

1.01

The terminology and classification of adhesives for wood

SANS 10183-1:2009

1

Adhesives for wood Part 1: Terminology and classification

SANS 10183-2:2009

1

Adhesives for wood Part 2: Requirements for structural applications

SANS 10183-3-1:2009/EN 204:2001, IDT, Ed. 2

1

Adhesives for wood Part 3-1: Non-structural applications - Classification of thermoplastic wood adhesives for non-structural applications

SANS 10183-3-2:2009/EN 205:2003, IDT, Ed. 2

1

Adhesives for wood Part 3-2: Non-structural applications - Determination of tensile shear strength of lap joints

SANS 10183-3-3:2009/EN 12765:2001, IDT, Ed. 1

1

Adhesives for wood Part 3-3: Non-structural applications - Classification of thermosetting wood adhesives for non-structural applications

SANS 10183-4-1:2009/EN 302-1:2004, IDT, Ed. 2

1

Adhesives for wood Part 4-1: Test methods Determination of bond strength in longitudinal tensile shear strength

SANS 10183-4-2:2009/EN 302-2:2004, IDT, Ed. 2

1

Adhesives for wood Part 4-2: Test methods Determination of resistance to delamination

SANS 10183-4-3:2009/EN 302-3:2004, IDT, Ed. 2

1

Adhesives for wood Part 4-3: Test methods Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength

SANS 10183-4-4:2009/EN 302-4:2004, IDT, Ed. 2

1

Adhesives for wood Part 4-4: Test methods Determination of the effects of wood shrinkage on the shear strength

SANS 10183-4-5:2009/EN 15416-2:2007, IDT, Ed. 1

1

Adhesives for wood Part 4-5: Test methods - Static load test of multiple bondline specimens in compression shear

SANS 10183-4-6:2010/EN 1245:1998, IDT, Ed. 1

1

Adhesives for wood Part 4-6: Test methods Determination of pH

SANS 10183-4-7:2010/ASTM D 3535:2007, IDT, Ed. 1

1

Adhesives for wood Part 4-7: Test methods Resistance to creep under static loading for structural wood laminating adhesives used under exterior exposure conditions

SANS 10184:2008 (SABS 0184)

1.01

Definitions for and measurement of body dimensions

SANS 10186:2009

3.02

The installation of textile floor coverings

SANS 10187-1:2009

1.01

Load securement on vehicles Part 1: General requirements

SANS 10187-2:2006

1

Load securement on vehicles Part 2: General freight

SANS 10187-3:2006

1

Load securement on vehicles Part 3: Metal loads

SANS 10187-4:2006

1

Load securement on vehicles Part 4: Timber and sugar cane

(SABS 0186)

Page 184

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10187-5:2006

1

Load securement on vehicles Part 5: Loose bulk loads

SANS 10187-6:2006

1

Load securement on vehicles Part 6: Containers

SANS 10187-7:2006

1

Load securement on vehicles Part 7: Abnormal loads

SANS 10187-8:2006

1

Load securement on vehicles Part 8: Dangerous goods

SANS 10187-9:2006

1

Load securement on vehicles Part 9: Glass sheeting

SANS 10188:2008

2.01

Standard methods of garment measurement

SANS 10191:2007/ISO 3740:2000, IDT, Ed. 2 (SABS 0191)

2

Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards

SANS 10196:2007/ISO 3745:2003, IDT, Ed. 2

2

Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms

SANS 10198-1:2004 (SABS 0198-1)

2

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 1: Definitions and statutory requirements

SANS 10198-2:2004

2

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 2: Selection of cable type and methods of installation

SANS 10198-3:2004 (SABS 0198-3)

2

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 3: Earthing systems - General provisions

SANS 10198-4:2010

2.01

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 4: Current ratings

SANS 10198-5:2004 (SABS 0198-5)

2

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 5: Determination of thermal and electrical resistivity of soil

SANS 10198-6:2004 (SABS 0198-6)

2

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 6: Transportation and storage

SANS 10198-7:2004

2

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 7: Safety precautions

SANS 10198-8:2007 (SABS 0198-8)

2.01

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 8: Cable laying and installation

SANS 10198-9:1988

1

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 9: Jointing and termination of extruded solid dielectricinsulated cables up to 3,3 kV

1

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 10: Jointing and termination of paper-insulated cables

(SABS 0188)

(SABS 0196)

(SABS 0198-2)

(SABS 0198-4)

(SABS 0198-7)

(SABS 0198-9)

SANS 10198-10:1988 (SABS 0198-10)

Page 185

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10198-11:2010 (SABS 0198-11)

2

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 11: Jointing and termination of screened polymericinsulated cables

SANS 10198-12:1988 (SABS 0198-12)

1

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 12: Installation of earthing system

SANS 10198-13:1988

1

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 13: Testing, commissioning and fault location

SANS 10198-14:1996 (SABS 0198-14)

2

The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 14: Installation of aerial bundled conductor (ABC) cables

SANS 10199:2004

2

The design and installation of earth electrodes

SANS 10200:1985 (SABS 0200)

1

Neutral earthing in medium voltage industrial power systems

SANS 10202-1:1991/ISO 10202-1:1991, IDT, Ed. 1

1

Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards Part 1: Card life cycle

SANS 10204:2006 (SABS 0204)

2.01

The application of fumigants

SANS 10205:2007

1.01

The measurement of noise emitted by motor vehicles in motion

SANS 10206:2007 (SABS 0206)

2.01

The handling, storage and disposal of pesticides

SANS 10208-1:2005

3

Design of structures for the mining industry Part 1: Headgear structures

SANS 10208-2:2007 (SABS 0208-2)

3

Design of structures for the mining industry Part 2: Sinking stages

SANS 10208-3:2001

2

Design of structures for the mining industry Part 3: Conveyances

SANS 10208-4:2001 (SABS 0208-4)

1

Design of structures for the mining industry Part 4: Shaft system structures

SANS 10209:2003

1.03

The design and construction of private swimming pools

SANS 10210:2004 (SABS 0210)

2.02

Calculating and predicting road traffic noise

SANS 10211:2008

1.02

The measurement of noise inside motor vehicles

SANS 10212:1998 (SABS 0212)

2

The roadside roadworthiness assessment of motor vehicles

SANS 10213:2008

3

The installation and safe use of ethylene oxide (EO) sterilizers in healthcare facilities and in industry

5

Evaluation of vehicle test stations

(SABS 0198-13)

(SABS 0199)

(SABS ISO 10202-1)

(SABS 0205)

(SABS 0208-1)

(SABS 0208-3)

(SABS 0209)

(SABS 0211)

(SABS 0213) SANS 10216:2009 (SABS 0216)

Page 186

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10217:2008 (SABS 0217)

1.01

The heat treatment of ground-engaging parts for farming implements

SANS 10218-1:2004

2.02

Acoustical properties of buildings Part 1: Grading criteria for the airborne sound insulation properties of buildings

SANS 10218-2:2004 (SABS 0218-2)

1.01

Acoustical properties of buildings Part 2: The assessment of building plans and buildings with respect to their acoustical properties

SANS 10219-1:2006

2

The determination of performance (at net power) of industrial internal combustion engines Part 1: Standard reference conditions and declarations of power, fuel consumption and lubricating oil consumption

2

The determination of performance (at net power) of industrial internal combustion engines Part 2: Test methods

SANS 10219-3:2006 (SABS 0219-3)

2

The determination of performance (at net power) of industrial internal combustion engines Part 3: Test measurements

SANS 10219-4:2006

2

The determination of performance (at net power) of industrial internal combustion engines Part 4: Speed governing

SANS 10219-5:2006 (SABS 0219-5)

2

The determination of performance (at net power) of industrial internal combustion engines Part 5: Torsional vibrations

SANS 10219-6:2006

2

The determination of performance (at net power) of industrial internal combustion engines Part 6: Overspeed protection

SANS 10220:2003 (SABS 0220)

1.01

The selection, use and maintenance of respiratory protective equipment

SANS 10221:2007

1.02

The testing of geotextiles

SANS 10222-1:2007 (SABS 0222-1)

1.02

Electrical security installations Part 1: General

SANS 10222-2:2007

1.01

Electrical security installations Part 2: Access control

SANS 10222-3:2006 (SABS 0222-3)

3

Electrical security installations Part 3: Electric security fences (non-lethal)

SANS 10222-5-1-1:2007

1.01

Electrical security installations Part 5-1-1: CCTV installations - CCTV surveillance systems for use in security applications - Operational requirements

SANS 10222-5-1-2:2007 (SABS 0222-5-1-2)

1.01

Electrical security installations Part 5-1-2: CCTV installations - CCTV surveillance systems for use in security applications - System design requirements

SANS 10222-5-1-3:2007

1.01

Electrical security installations Part 5-1-3: CCTV installations - CCTV surveillance systems for use in security applications - Installation, planning and implementation requirements

1

Electrical security installations Part 5-1-4: CCTV installations - CCTV surveillance systems for use in security applications - Testing, commissioning and hand-over requirements

(SABS 0218-1)

(SABS 0219-1)

SANS 10219-2:2006 (SABS 0219-2)

(SABS 0219-4)

(SABS 0219-6)

(SABS 0221)

(SABS 0222-2)

(SABS 0222-5-1-1)

(SABS 0222-5-1-3)

SANS 10222-5-1-4:2003

Page 187

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10222-5-1-5:2003

1

Electrical security installations Part 5-1-5: CCTV installations - CCTV surveillance systems for use in security applications - Maintenance requirements

SANS 10222-5-2:2007/BS EN 50132-7:1997, MOD, Ed. 1 (SABS 0222-5-2)

1.01

Electrical security installations Part 5-2: CCTV installations - Application guidelines

SANS 10225:1991 (SABS 0225)

1

The design and construction of lighting masts

SANS 10226:2009

2.01

The installation, post-installation tests and maintenance of microbiological safety cabinets

SANS 10227:2007 (SABS 0227)

2

Criteria for the operation of inspection authorities performing inspection in terms of the Pressure Equipment Regulations

SANS 10228:2010

5

The identification and classification of dangerous goods for transport

SANS 10229-1:2010

2

Transport of dangerous goods - Packaging and large packaging for road and rail transport Part 1: Packaging

SANS 10229-2:2007

1

Transport of dangerous goods - Packaging and large packaging for road and rail transport Part 2: Large packaging

SANS 10231:2006 (SABS 0231)

3

Transport of dangerous goods - Operational requirements for road vehicles

SANS 10232-1:2007

3

Transport of dangerous goods - Emergency information systems Part 1: Emergency information system for road transport

SANS 10232-3:2007 (SABS 0232-3)

3

Transport of dangerous goods - Emergency information systems Part 3: Emergency response guides

SANS 10232-4:2007

1.01

Transport of dangerous goods - Emergency information systems Part 4: Transport emergency card

SANS 10233:2008 (SABS 0233)

3

Transport of dangerous goods - Intermediate bulk containers for road and rail transport

SANS 10234:2008

1.01

Globally Harmonized System of classification and labelling of chemicals (GHS)

SANS 10234 SUPPLEMENT:2008

1

List of classification and labelling of chemicals in accordance with the Globally Harmonized System (GHS)

SANS 10235:2007

2.01

Fibre-content labelling of textiles and textile products

SANS 10237:1991 (SABS 0237)

1

Roof and side cladding

SANS 10238:2005

1.03

Welding and thermal cutting processes - Health and safety

SANS 10239:1992 (SABS 0239)

1

Hygienic practices on commercial fishing vessels

SANS 10240:2005

2.01

The installation of replacement auto glass in motor vehicles by the direct glazing method

(SABS 0226)

(SABS 0228)

(SABS 0232-1)

(SABS 0235)

(SABS 0238)

(SABS 0240)

Page 188

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10241:2008 (SABS 0241)

1.02

Tachograph centres - Installation and repair facilities, including facilities for the installation of onboard computers

SANS 10242-1:1999

1.04

The rewinding and refurbishing of rotating electrical machines Part 1: Low-voltage three-phase induction motors

SANS 10243:2004 (SABS 0243)

3

The manufacture and erection of timber trusses

SANS 10244-1:2003/EN 10244-1:2001, IDT, Ed. 1

1

Steel wire and wire products - Non-ferrous metallic coatings on steel wire Part 1: General principles

SANS 10244-2:2003/EN 10244-2:2001, IDT, Ed. 1

1

Steel wire and wire products - Non-ferrous metallic coatings on steel wire Part 2: Zinc and zinc alloy coatings

SANS 10245:2008

1.01

The maintenance of textile floor coverings

SANS 10246:1993 (SABS 0246)

1

Accessibility of buildings to disabled persons

SANS 10247:2009

1.01

The cleaning of textile upholstered furniture

SANS 10248:2004 (SABS 0248)

2

Management of healthcare waste

SANS 10248-1:2008

1

Management of healthcare waste - Part 1: Management of healthcare risk waste from a healthcare facility

SANS 10248-2:2009

1

Management of healthcare waste - Part 2: Management of healthcare risk waste for healthcare facilities and healthcare providers in rural and remote settings

SANS 10249:2009 (SABS 0249)

1.01

Masonry walling

SANS 10250:2010

2

Fitment and repair centres for automotive airconditioning systems

SANS 10252-1:2004 (SABS 0252-1)

2

Water supply and drainage for buildings Part 1: Water supply installations for buildings

SANS 10252-2:1993

1

Water supply and drainage for buildings Part 2: Drainage installations for buildings

SANS 10253:2005 (SABS 0253)

1.02

Brake service workshops

SANS 10254:2004

3

The installation, maintenance, replacement and repair of fixed electric storage water heating systems

SANS 10255:2009 (SABS 0255)

2.01

Health, safety and environmental guidelines for the construction and operation of timber treatment plants

SANS 10256:2005

1.01

Brake drum reconditioning

1.02

The reconditioning of valves for use with pipelines

(SABS 0242-1)

(SABS 0245)

(SABS 0247)

(SABS 0252-2)

(SABS 0254)

(SABS 0256) SANS 10257:2004 (SABS 0257)

Page 189

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10260-1:2004 (SABS 0260-1)

1.02

Industrial gas pipelines Part 1: Distribution of oxygen, nitrogen and argon at consumer sites

SANS 10260-2:2004

1.01

Industrial gas pipelines Part 2: Distribution of hydrogen at consumer sites

SANS 10260-3:2004 (SABS 0260-3)

1.01

Industrial gas pipelines Part 3: Distribution of acetylene at consumer sites

SANS 10260-4:2004

1.01

Industrial gas pipelines Part 4: Distribution of carbon dioxide at consumer sites

SANS 10262-1:2006 (SABS 0262-1)

2.01

Radio sites Part 1: Technical performance (narrowband analog mobile radio services)

SANS 10263-0:2009

1

The warehousing of dangerous goods Part 0: General requirements

SANS 10263-2:2008

1

The warehousing of dangerous goods Part 2: The storage and handling of gas cylinders

SANS 10263-5:2009

1.01

The warehousing of dangerous goods Part 5: The storage and handling of oxidizing substances

SANS 10264-1:2009 (SABS 0264-1)

2

Disaster management Part 1: Terminology and implementation

SANS 10264-2:2009

2

Disaster management Part 2: All-risk emergency operation planning

SANS 10264-3:2009 (SABS 0264-3)

2

Disaster management Part 3: Hazard-specific response planning

SANS 10265:1999

1

The classification and labelling of dangerous substances and preparations for sale and handling

SANS 10266:2007 (SABS 0266)

2

The safe use, operation and inspection of manriding belt conveyors in mines

SANS 10267:2006

3.01

Homologation of motor vehicle models

SANS 10268-1:2009 (SABS 0268-1)

1.03

Welding of thermoplastics - Welding processes Part 1: Heated-tool welding

SANS 10268-2:2004

1.01

Welding of thermoplastics - Welding processes Part 2: Electrofusion welding

SANS 10268-3:2005 (SABS 0268-3)

1.01

Welding of thermoplastics - Welding processes Part 3: Hot-gas welding

SANS 10268-4:2004

1.01

Welding of thermoplastics - Welding processes Part 4: Hot-gas extrusion welding

SANS 10268-5:2004 (SABS 0268-5)

1.01

Welding of thermoplastics - Welding processes Part 5: Solvent welding

SANS 10268-6:2003

1

Welding of thermoplastics - Welding processes Part 6: Ultrasonic welding, staking and insertion

SANS 10268-10:2009 (SABS 0268-10)

1.03

Welding of thermoplastics - Welding processes Part 10: Weld defects

(SABS 0260-2)

(SABS 0260-4)

(SABS 0264-2)

(SABS 0265)

(SABS 0267)

(SABS 0268-2)

(SABS 0268-4)

Page 190

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10269:2009 (SABS 0269)

1.03

Welding of thermoplastics - Testing and approval of welders

SANS 10270:2004

1.01

Welding of thermoplastics - Approval of welding procedures and welds

SANS 10272-1:2009/ISO 10272-1:2006, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Horizontal method for detection and enumeration of Campylobacter spp. Part 1: Detection method

SANS 10274:2005

1.01

The refurbishing of diesel engines

SANS 10275:2009/ISO 10275:2007, IDT, Ed. 2

2

Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent

SANS 10276:2005

1.01

Motor vehicle radiator reconditioning workshops

SANS 10278:2005 (SABS 0278)

1.01

The remanufacture of petrol engines

SANS 10279:2005

1.01

The rebuilding of automotive gearboxes

SANS 10280:2001 (SABS 0280)

1.01

Overhead power lines for conditions prevailing in South Africa

SANS 10280-1:2008/NRS 041-1:2008, IDT, Ed. 1

1

Overhead power lines for conditions prevailing in South Africa Part 1: Safety

SANS 10281:2003 (SABS 0281)

1.01

Engine speed (S values), reference sound levels and permissible sound levels of stationary road vehicles

SANS 10282:1997

1

Maintenance of helmet light assemblies

SANS 10284:2006/ISO 284:2003, IDT, Ed. 3

2

Conveyor belts - Electrical conductivity Specification and test method

SANS 10285:2005/ISO 10285:1992, IDT, Ed. 1

1

Rolling bearings, linear motion, recirculating ball, sleeve type - Metric series

SANS 10286:1998 (SABS 0286)

1

Mine residue

SANS 10287:2000

1

Automatic sprinkler installations for fire-fighting purposes

SANS 10289:2008/ISO 10289:1999, IDT, Ed. 1

1

Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests

SANS 10292:2001 (SABS 0292)

1.01

Earthing of low-voltage (LV) distribution systems

SANS 10293:1996

1

Condition assessment of steel wire ropes on mine winders

1

The performance, operation, testing and maintenance of drum winders relating to rope safety

(SABS 0270)

(SABS 0274)

(SABS 0276)

(SABS 0279)

(SABS 0282)

(SABS 0287)

(SABS 0293) SANS 10294:2000 (SABS 0294)

Page 191

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10295-1:2003

1

Suspended access equipment Part 1: Permanently suspended access equipment

SANS 10295-2:2010

1.01

Suspended access equipment Part 2: Temporary suspended platforms (TSPs)

SANS 10296:2008 (SABS 0296)

2

Hand signals used with cranes and with lifting and suspended equipment

SANS 10297:2006

1.01

The reconditioning of external LPG cylinder valves

SANS 10298:2009 (SABS 0298)

1.02

Indirect small to medium-sized gas chlorination systems for the disinfection of water

SANS 10299-0:2003

1

Development, maintenance and management of groundwater resources Part 0: Glossary of terms

SANS 10299-1:2003 (SABS 0299-1)

1.01

Development, maintenance and management of groundwater resources Part 1: The location and siting of water boreholes

SANS 10299-2:2003

1

Development, maintenance and management of groundwater resources Part 2: The design, construction and drilling of boreholes

SANS 10299-4:2003 (SABS 0299-4)

1.01

Development, maintenance and management of groundwater resources Part 4: Test-pumping of water boreholes

SANS 10299-5:2003

1.02

Development, maintenance and management of groundwater resources Part 5: The design, selection and performance of pumping equipment for production boreholes

1.02

Development, maintenance and management of groundwater resources Part 6: The installation and commissioning of pumping equipment for production boreholes

SANS 10299-7:2003

1

Development, maintenance and management of groundwater resources Part 7: The rehabilitation of water boreholes

SANS 10299-8:2003

1

Development, maintenance and management of groundwater resources Part 8: The management of water boreholes

SANS 10299-9:2003

1

Development, maintenance and management of groundwater resources Part 9: The decommissioning of water boreholes

SANS 10302:2008

1.01

Tail lifts, mobile lifts and ramps associated with vehicles

SANS 10304-1:2008 (SABS 0304-1)

1.01

The classification of pesticides and stock remedies for sale and handling in South Africa Part 1: The classification of pesticides

SANS 10304-2:2002

1

The classification of pesticides and stock remedies for sale and handling in South Africa Part 2: The classification of stock remedies

SANS 10305-1:2005 (SABS 0305-1)

1.01

Painting of buildings Part 1: Paint and paint selection

SANS 10305-2:2005

1.01

Painting of buildings Part 2: Paint application and defects

(SABS 0297)

(SABS 0299-5)

SANS 10299-6:2009 (SABS 0299-6)

(SABS 0302)

(SABS 0305-2)

Page 192

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10305-3:2005 (SABS 0305-3)

1.01

Painting of buildings Part 3: Paint types

SANS 10305-4:2005

1.01

Painting of buildings Part 4: Painting of walls, ceilings and cladding

SANS 10305-5:2005 (SABS 0305-5)

1.01

Painting of buildings Part 5: Painting of roofs and steel structures

SANS 10305-6:2005

1.01

Painting of buildings Part 6: Painting of wood

SANS 10306:1999 (SABS 0306)

1

The management of potable water in distribution systems

SANS 10307:2006

1.01

Cranes, lifting and suspended equipment - Support documentation and training

SANS 10310:2005 (SABS 0310)

1.01

The manufacture and reconditioning of replacement brake lining assemblies

SANS 10313:2010

3.01

Protection against lightning - Physical damage to structures and life hazard

SANS 10316:2009 (SABS 0316)

1.02

Aircraft ground support - Vehicle-mounted loading equipment

SANS 10317:2004

1.01

Instructions for the use of consumer products Electrical appliances

SANS 10319:2006 (SABS 0319)

1.01

The registration of manufacturers, importers and builders of categories M, N, O and L motor vehicles and agricultural tractors

SANS 10320:2004

1

South African guide to the systematic evaluation of coal resources and coal reserves

SANS 10322:2005 (SABS 0322)

2

Surface finishing of architectural aluminium

SANS 10324:2007

1.01

Inspection and supplemental treatment of treated wood utility poles

SANS 10325-1:2007 (SABS 0325-1)

1.01

The safe application of detonator systems for use in mining and civil blasting applications Part 1: Electronic detonator systems

SANS 10325-2:2007

1.01

The safe application of detonator systems for use in mining and civil blasting applications Part 2: Electric detonator systems - Shot exploder based

SANS 10326:2008 (SABS 0326)

1.01

Structural bearings - The design of bridge bearings

SANS 10328:2008

3

Methods for environmental noise impact assessments

SANS 10329:2004 (SABS 0329)

1.01

The design and construction of sectional steel tanks for storage of liquids at or above ground level

SANS 10330:2007

2.01

Requirements for a Hazard Analysis and Critical Control Point (HACCP) system

(SABS 0305-4)

(SABS 0305-6)

(SABS 0307)

(SABS 0313)

(SABS 0317)

(SABS 0324)

(SABS 0325-2)

(SABS 0328)

(SABS 0330)

Page 193

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10331:2000 (SABS 0331)

1

Translocation of certain species of wild herbivore

SANS 10333-1:2006

1.01

Industrial rope access Part 1: Worksite procedures

SANS 10333-2:2006 (SABS 0333-2)

1.01

Industrial rope access Part 2: Training and certification procedures

SANS 10333-3:2006

1.01

Industrial rope access Part 3: Inspection, certification and management procedures for equipment

SANS 10335:1999 (SABS 0335)

1

The installation, maintenance and safe use of overhead monorail transport systems for underground use

SANS 10338:2009

1.01

Homologation of respiratory equipment

SANS 10339:2009 (SABS 0339)

2.01

Underground rail trackwork in mines

SANS 10340-1:2006

1.01

Installation of telecommunication cables Part 1: Fibre optic cable in buildings

SANS 10340-2:2006

1

Installation of telecommunication cables Part 2: Outdoor fibre optic cables

SANS 10341:2009

1.02

Installation and maintenance of bearings - General guidelines

SANS 10343:2003 (SABS 0343)

1.01

Verification of non-automatic electronic selfindicating road vehicle mass measuring equipment for use by road traffic authorities

SANS 10346:2007

1.01

Complaints handling

SANS 10347:2002 (SABS 0347)

1

Avoidance of hazards underground in collieries due to lightning

SANS 10349:2004

1

Fibre-reinforced plastics (FRP) composites Glossary of technical terms

SANS 10353:2009

1.01

Small arms shooting ranges

SANS 10354:2007

2

The safe application of underground railway driven and non-driven wheel sets

SANS 10356:2005 (SABS 0356)

1.01

The repair of heavy-duty tubeless and multi-piece steel wheels for off-road vehicles

SANS 10357:2004

1.02

The calculation of sound propagation by the Concawe method

SANS 10359-1:2002/ISO 10359-1:1992, IDT, Ed. 1

1

Water quality - Determination of fluoride Part 1: Electrochemical probe method for potable and lightly polluted water

SANS 10359-2:2005/ISO 10359-2:1994, IDT, Ed. 1

1

Water quality - Determination of fluoride Part 2: Determination of inorganically bound total fluoride after digestion and distillation

(SABS 0333-1)

(SABS 0333-3)

(SABS 0338)

(SABS 0340-1)

(SABS 0341)

(SABS 0346)

(SABS 0354)

(SABS 0357)

Page 194

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10361:2000/ISO 10361:2000, IDT, Ed. 1 (SABS ISO/TR 10361)

1

Textile floor coverings - Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers

SANS 10366:2009

2

Health and safety at events - Requirements

SANS 10368:2007 (SABS 0368)

1.01

Transport of low-hazard goods in bulk - Emergency information for road vehicles

SANS 10369:2007

1.01

Non-destructive examination and testing of steel wire rope

SANS 10370:2008 (SABS 0370)

1.01

Road vehicles designed or adapted for use by or transporting persons with disabilities

SANS 10371:2005

1

Terms and definitions for clothing

SANS 10372:2003

1

Automotive fitment centres

(SABS 0369)

SANS 10373-1:2007/ISO/IEC 10373-1:2006, IDT, Ed. 2 2

Identification cards - Test methods Part 1: General characteristics

SANS 10373-2:2007/ISO/IEC 10373-2:2006, IDT, Ed. 2 2

Identification cards - Test methods Part 2: Cards with magnetic stripes

SANS 10373-3:2004/ISO/IEC 10373-3:2001, IDT, Ed. 1 1

Identification cards - Test methods Part 3: Integrated circuit(s) cards with contacts and related interface devices

SANS 10373-5:2007/ISO/IEC 10373-5:2006, IDT, Ed. 2 2

Identification cards - Test methods - Part 5: Optical memory cards

SANS 10373-6:2004/ISO/IEC 10373-6:2001, IDT, Ed. 1 1

Identification cards - Test methods Part 6: Proximity cards

SANS 10373-7:2009/ISO/IEC 10373-7:2008, IDT, Ed. 2 2

Identification cards - Test methods - Part 7: Vicinity cards

SANS 10375:2006

1

The inspection, testing and examination of overhead cranes

SANS 10377-1:2006 (SABS 0377-1)

1.01

Pressure vessels for human occupancy Part 1: Hyperbaric chambers (therapeutic)

SANS 10378:2005

1

General requirements for the competence of verification laboratories in terms of the Trade Metrology Act

SANS 10379:2005

1

Zoo and aquarium practice

SANS 10380:2003

1

Procedures for sampling vegetation according to scale

SANS 10383-1:2003

1

Railway carriages for transporting persons with special needs Part 1: Commuter carriages

Page 195

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10383-2:2006

1

Railway carriages for transporting persons with special needs Part 2: Long-distance carriages

SANS 10385-1:2005

1

Requirements for the implementation of an identity preservation system (IP system) Part 1: IP system for the production, storage, handling and transportation of non-genetically modified unprocessed agricultural products

SANS 10385-2:2007

1

Requirements for the implementation of an identity preservation system (IP system) Part 2: IP system for the processing and manufacturing industry

SANS 10385-3:2007

1

Requirements for the implementation of an identity preservation system (IP system) Part 3: Sampling and testing protocols

SANS 10386:2008

1

The care and use of animals for scientific purposes

SANS 10388:2008

1

The inspection, examination and testing of lift trucks

SANS 10389-1:2003

1

Exterior lighting Part 1: Artificial lighting of exterior areas for work and safety

SANS 10389-2:2007

1.01

Exterior lighting Part 2: Exterior security lighting

SANS 10389-3:2004/CIE 150:2003, IDT, Ed. 1

1

Exterior lighting Part 3: Guide on the limitation of the effects of obtrusive light from outdoor lighting installations

SANS 10391:2004

1

The welfare of wild animals transported by sea

SANS 10393:2008

1

Hair care products - General requirements

SANS 10396:2003

1

Implementing preferential construction procurement policies using targeted procurement procedures

SANS 10397:2003

1

Environmental considerations for the planning and management of telecommunication structures

SANS 10399:2003

1

Quality management systems - Requirements for bus operators

SANS 10400:1990

2

The application of the National Building Regulations

SANS 10400-N:2010

3

The application of the National Building Regulations Part N: Glazing

SANS 10403:2003

1

Formatting and compilation of construction procurement documents

SANS 10404:2007

2

The design and safe use of underground mine rolling stock

SANS 10405:2009

1

Transport of dangerous goods by rail - Operational and design requirements and emergency preparedness

(SABS 0400)

Page 196

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10406:2007

1.01

Transport of dangerous goods - The reprocessing of previously certified packaging

SANS 10407:2006

1.01

Thatched roof construction

SANS 10408:2005

1

Repairs to tyres for motor vehicles

SANS 10409:2005

1

Design, selection and installation of geomembranes

SANS 10456:2007/ISO 10456:1999, IDT, Ed. 2

1

Building materials and products - Procedures for determining declared and design thermal values

SANS 10460:2006/ISO 10460:2005, IDT, Ed. 2

2

Gas cylinders - Welded carbon-steel gas cylinders Periodic inspection and testing

SANS 10461:2006/ISO 10461:2005, IDT, Ed. 2

2

Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing

SANS 10462:2006/ISO 10462:2005, IDT, Ed. 2

2

Gas cylinders - Transportable cylinders for dissolved acetylene - Periodic inspection and maintenance

SANS 10472-1:1997/ISO 10472-1:1997, IDT, Ed. 1 (SABS ISO 10472-1)

1

Safety requirements for industrial laundry machinery Part 1: Common requirements

SANS 10472-2:1997/ISO 10472-2:1997, IDT, Ed. 1

1

Safety requirements for industrial laundry machinery Part 2: Washing machines and washer-extractors

SANS 10472-3:1997/ISO 10472-3:1997, IDT, Ed. 1 (SABS ISO 10472-3)

1

Safety requirements for industrial laundry machinery Part 3: Washing tunnel lines including component machines

SANS 10472-4:1997/ISO 10472-4:1997, IDT, Ed. 1

1

Safety requirements for industrial laundry machinery Part 4: Air dryers

SANS 10472-5:1997/ISO 10472-5:1997, IDT, Ed. 1 (SABS ISO 10472-5)

1

Safety requirements for industrial laundry machinery Part 5: Flatwork ironers, feeders and folders

SANS 10472-6:1997/ISO 10472-6:1997, IDT, Ed. 1

1

Safety requirements for industrial laundry machinery Part 6: Ironing and fusing presses

2

Plastics piping systems for hot and cold water installations - Guidance for classification and design

SANS 10536-1:2000/ISO/IEC 10536-1:2000, IDT, Ed. 2 2 (SABS ISO/IEC 10536-1)

Identification cards - Contactless integrated circuit(s) cards - Close-coupled cards Part 1: Physical characteristics

SANS 10536-2:2004/ISO/IEC 10536-2:1995, IDT, Ed. 1 1

Identification cards - Contactless integrated circuit(s) cards Part 2: Dimensions and location of coupling areas

SANS 10536-3:2004/ISO/IEC 10536-3:1996, IDT, Ed. 1 1

Identification cards - Contactless integrated circuit(s) cards Part 3: Electronic signals and reset procedures

SANS 10566:2006/ISO 10566:1994, IDT, Ed. 1

1

Water quality - Determination of aluminium Spectrometric method using pyrocatechol violet

SANS 10576-1:2009/ISO 10576-1:2003, IDT, Ed. 1

1

Statistical methods - Guidelines for the evaluation of conformity with specified requirements Part 1: General principles

(SABS ISO 10472-2)

(SABS ISO 10472-4)

(SABS ISO 10472-6) SANS 10508:2008/ISO 10508:2006, IDT, Ed. 2 (SABS ISO 10508)

Page 197

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10592:2008/ISO 10592:1994, IDT, Ed. 1

1

Small craft - Hydraulic steering systems

SANS 10594:2007/ISO 10594:2006, IDT, Ed. 2

1

Micrographics - Rotary camera systems - Test target for checking performance

SANS 10657:2005/ISO/TR 10657:1991, IDT, Ed. 1

1

Explanatory notes on SANS 351

SANS 10705-1:2002/ISO 10705-1:1995, IDT, Ed. 1

1

Water quality - Detection and enumeration of bacteriophages Part 1: Enumeration of F-specific RNA bacteriophages

SANS 10705-2:2002/ISO 10705-2:2000, IDT, Ed. 1

1

Water quality - Detection and enumeration of bacteriophages Part 2: Enumeration of somatic coliphages

SANS 10705-4:2005/ISO 10705-4:2001, IDT, Ed. 1

1

Water quality - Detection and enumeration of bacteriophages Part 4: Enumeration of bacteriophages infecting Bacteroides fragilis

SANS 10746-1:2003/ISO/IEC 10746-1:1998, IDT, Ed. 1 1

Information technology - Open distributed processing - Reference model: Overview

SANS 10746-2:2003/ISO/IEC 10746-2:1996, IDT, Ed. 1 1

Information technology - Open distributed processing - Reference model: Foundations

SANS 10746-3:2003/ISO/IEC 10746-3:1996, IDT, Ed. 1 1

Information technology - Open distributed processing - Reference model: Architecture

SANS 10746-4:2003/ISO/IEC 10746-4:1998, IDT, Ed. 1 1

Information technology - Open distributed processing - Reference model: Architectural semantics

SANS 10752:1994/ISO 10752:1994, IDT, Ed. 1

1

Coal sizing equipment - Performance evaluation

SANS 10753:2005/ISO 10753:1994, IDT, Ed. 1

1

Coal preparation plant - Assessment of the liability to breakdown in water of materials associated with coal seams

SANS 10802:2010/ISO 10802:1992, IDT, Ed. 1

1

Ductile iron pipelines - Hydrostatic testing after installation

SANS 10803:2010/ISO 10803:1999, IDT, Ed. 1

1

Design method for ductile iron pipes

SANS 10804-1:2010/ISO 10804-1:1996, IDT, Ed. 1

1

Restrained joint systems for ductile iron pipelines Part 1: Design rules and type testing

SANS 10815:2003/ISO 815:1991, IDT, Ed. 2

1

Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures

SANS 10815-1:2009/ISO 815-1:2008, IDT, Ed. 1

1

Rubber, vulcanized or thermoplastic - Determination of compression set Part 1: At ambient or elevated temperatures

SANS 10815-2:2009/ISO 815-2:2008, IDT, Ed. 1

1

Rubber, vulcanized or thermoplastic - Determination of compression set Part 2: At low temperatures

SANS 10823:2007/ISO 10823:2004, IDT, Ed. 2

1

Guidelines for the selection of roller chain drives

(SABS ISO 10752)

Page 198

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 10834:2003/ISO 10834:1992, IDT, Ed. 1

1

Textile floor coverings - Non-destructive measurement of pile thickness above the backing WRONZ gauge method

SANS 10843:1997/ISO 10843:1997, MOD, Ed. 1

1

Acoustics - Methods for the description and physical measurement of single impulses or series of impulses

SANS 10957:2009/ISO 10957:1993, IDT, Ed. 1

1

Information and documentation - International standard music number (ISMN)

SANS 10965:1998/ISO 10965:1998, IDT, Ed. 1

1

Textile floor coverings - Determination of electrical resistance

SANS 10968:2008/ISO 10968:2004, IDT, Ed. 2

2

Earth-moving machinery - Operator's controls

SANS 10972-3:2007/ISO 10972-3:2003, IDT, Ed. 1

1

Cranes - Requirements for mechanisms Part 3: Tower cranes

SANS 10973:1995/ISO 10973:1995, IDT, Ed. 1 (SABS ISO 10973)

1

Cranes - Spare parts manual

SANS 10993-1:2003/ISO 10993-1:1997, IDT, Ed. 2

1

Biological evaluation of medical devices Part 1: Evaluation and testing

SANS 10993-3:2004/ISO 10993-3:2003, IDT, Ed. 2

1

Biological evaluation of medical devices Part 3: Test for genotoxicity, carcinogenicity and reproductive toxicity

SANS 10993-4:2004/ISO 10993-4:2002, IDT, Ed. 2

1

Biological evaluation of medical devices Part 4: Selection of tests for interactions with blood

SANS 10993-5:2003/ISO 10993-5:1999, IDT, Ed. 2

1

Biological evaluation of medical devices Part 5: Tests for in vitro cytotoxicity

(SABS ISO 10843)

(SABS ISO 10965)

SANS 10993-10:2004/ISO 10993-10:2002, IDT, Ed. 2 1

Biological evaluation of medical devices Part 10: Tests for irritation and delayed-type hypersensitivity

SANS 10993-11:2008/ISO 10993-11:2006, IDT, Ed. 2 2

Biological evaluation of medical devices Part 11: Tests for systemic toxicity

SANS 11014:2010/ISO 11014:2009, IDT, Ed. 1

1

Safety data sheet for chemical products - Content and order of sections

SANS 11014-1:1994/ISO 11014-1:1994, IDT, Ed. 1 (SABS ISO 11014-1)

1

Safety data sheet for chemical products Part 1: Content and order of sections

SANS 11040-1:2007/ISO 11040-1:1992, IDT, Ed. 1

1

Prefilled syringes Part 1: Glass cylinders for dental local anaesthetic cartridges

SANS 11043-1:2004/ISO 1043-1:2001, IDT, Ed. 3

1

Plastics - Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics

SANS 11043-2:2004/ISO 1043-2:2000, IDT, Ed. 2

1

Plastics - Symbols and abbreviated terms Part 2: Fillers and reinforcing materials

SANS 11064-1:2010/ISO 11064-1:2000, IDT, Ed. 1

1

Ergonomic design of control centres Part 1: Principles for the design of control centres

SANS 11083:2005/ISO 11083:1994, IDT, Ed. 1

1

Water quality - Determination of chromium (VI) Spectrometric method using 1,5-diphenylcarbazide

Page 199

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 11105:2008/ISO 11105:1997, IDT, Ed. 2

1

Small craft - Ventilation of petrol engine and/or petrol tank compartments

SANS 11108:2008

3

Washing pretreatment of textile fabrics

SANS 11120:1999/ISO 11120:1999, IDT, Ed. 1 (SABS ISO 11120)

1

Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3 000 l - Design, construction and testing

SANS 11133-2:2004/ISO/TS 11133-2:2003, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Guidelines on preparation and production of culture media Part 2: Practical guidelines on performance testing of culture media

SANS 11135-1:2008/ISO 11135-1:2007, IDT, Ed. 1

1

Sterilization of health care products - Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

SANS 11137-1:2007/ISO 11137-1:2006, IDT, Ed. 1

1

Sterilization of health care products - Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

SANS 11137-2:2007/ISO 11137-2:2006, IDT, Ed. 1

1

Sterilization of health care products - Radiation Part 2: Establishing the sterilization dose

SANS 11137-3:2007/ISO 11137-3:2006, IDT, Ed. 1

1

Sterilization of health care products - Radiation Part 3: Guidance on dosimetric aspects

SANS 11138-1:2007/ISO 11138-1:2006, IDT, Ed. 2 (SABS ISO 11138-1)

2

Sterilization of health care products - Biological indicators Part 1: General requirements

SANS 11138-2:2007/ISO 11138-2:2006, IDT, Ed. 2

2

Sterilization of health care products - Biological indicators Part 2: Biological indicators for ethylene oxide sterilization processes

SANS 11138-3:2007/ISO 11138-3:2006, IDT, Ed. 2 (SABS ISO 11138-3)

2

Sterilization of health care products - Biological indicators Part 3: Biological indicators for moist heat sterilization processes

SANS 11166:2006

2.04

Textiles - Colour fastness to domestic washing procedures

SANS 11167:2005 (SABS SM 1167)

3

Textiles - Dimensional stability during domestic washing and drying procedures

SANS 11169:2003/ISO 11169:1993, IDT, Ed. 1

1

Machinery for forestry - Wheeled special machines Vocabulary, performance test methods and criteria for brake systems

SANS 11193-1:2004/ISO 11193-1:2002, IDT, Ed. 1

1

Single-use medical examination gloves Part 1: Specification for gloves made from rubber latex or rubber solution

SANS 11200:1995/ISO 11200:1995, IDT, Ed. 1

1

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions

1

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane

(SABS SM 1108)

(SABS ISO 11138-2)

(SABS SM 1166)

(SABS ISO 11200)

SANS 11201:1995/ISO 11201:1995, IDT, Ed. 1 (SABS ISO 11201)

Page 200

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 11202:1995/ISO 11202:1995, IDT, Ed. 1 (SABS ISO 11202)

1

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ

SANS 11203:1995/ISO 11203:1995, IDT, Ed. 1 (SABS ISO 11203)

1

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level

SANS 11204:1995/ISO 11204:1995, IDT, Ed. 1

1

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections

SANS 11210:1995/ISO 11210:1995, IDT, Ed. 1 (SABS ISO 11210)

1

Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate

SANS 11285:2005/ISO 11285:2004, IDT, Ed. 1

1

Milk - Determination of lactulose content - Enzymatic method

SANS 11290-1:1996/ISO 11290-1:1996, IDT, Ed. 1 (SABS ISO 11290-1)

1

Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of Listeria monocytogenes Part 1: Detection method

SANS 11290-2:1998/ISO 11290-2:1998, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of Listeria monocytogenes Part 2: Enumeration method

SANS 11345:2003/ISO 11345:1997, IDT, Ed. 1

1

Rubber - Assessment of carbon black dispersion Rapid comparative methods

SANS 11346:2003/ISO 11346:1997, IDT, Ed. 1

1

Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use from an Arrhenius plot

SANS 11377:2003/ISO 11377:1997, IDT, Ed. 1

1

Textile floor coverings - Floor soiling - Test site setup and soiling evaluation

SANS 11378-2:2001/ISO 11378-2:2001, IDT, Ed. 1 (SABS ISO 11378-2)

1

Textile floor coverings - Laboratory soiling tests Part 2: Drum test

SANS 11379:2003/ISO 11379:1997, IDT, Ed. 1

1

Textile floor coverings - Laboratory cleaning procedure using spray extraction

SANS 11407:2009/ISO 1407:1992, IDT, Ed. 2

2

Rubber - Determination of solvent extract

SANS 11426:2008/ISO 11426:1997, IDT, Ed. 2

2

Determination of gold in gold jewellery alloys Cupellation method (fire assay)

SANS 11427:1993/ISO 11427:1993, IDT, Ed. 1 (SABS ISO 11427)

1

Determination of silver in silver jewellery alloys Volumetric (potentiometric) method using potassium bromide

SANS 11431-1:2003/ISO 1431-1:1989, IDT, Ed. 3

1

Rubber, vulcanized or thermoplastic - Resistance to ozone cracking Part 1: Static strain test

SANS 11431-3:2003/ISO 1431-3:2000, IDT, Ed. 1

1

Rubber, vulcanized or thermoplastic - Resistance to ozone cracking Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers

(SABS ISO 11204)

(SABS ISO 11290-2)

(SABS ISO 11426)

Page 201

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 11432:2003/ISO 1432:1988, IDT, Ed. 3

1

Rubber, vulcanized or thermoplastic - Determination of low temperature stiffening (Gehman test)

SANS 11446:2005/ISO 11446:2004, IDT, Ed. 3

3

Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage

SANS 11462-1:2009/ISO 11462-1:2001, IDT, Ed. 1

1

Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC

SANS 11490:1995/ISO 11490:1995, IDT, Ed. 1 (SABS ISO 11490)

1

Determination of palladium in palladium jewellery alloys - Gravimetric determination with dimethylglyoxime

SANS 11512:2003/ISO 11512:1995, IDT, Ed. 1

1

Machinery for forestry - Tracked special machines Performance criteria for brake systems

SANS 11537:2004/ISO 11537:1998, IDT, Ed. 1

1

Non-destructive testing - Thermal neutron radiographic testing - General principles and basic rules

SANS 11540:1993/ISO 11540:1993, IDT, Ed. 1

1

Caps for writing and marking instruments intended for use by children up to 14 years of age - Safety requirements

SANS 11547:2008/ISO 11547:1994, IDT, Ed. 1

1

Small craft - Start-in-gear protection

SANS 11564:2004/EN 1564:1997, IDT, Ed. 1

1

Founding - Austempered ductile cast irons

(SABS ISO 11446)

(SABS ISO 11540)

SANS 11581-1:2000/ISO/IEC 11581-1:2000, IDT, Ed. 1 1 (SABS ISO/IEC 11581-1)

Information technology - User system interfaces and symbols - Icon symbols and functions Part 1: Icons General

SANS 11581-3:2000/ISO/IEC 11581-3:2000, IDT, Ed. 1 1 (SABS ISO/IEC 11581-3)

Information technology - User system interfaces and symbols - Icon symbols and functions Part 3: Pointer icons

SANS 11591:2008/ISO 11591:2000, IDT, Ed. 1

1

Small craft, engine-driven - Field of vision from helm position

SANS 11592:2008/ISO 11592:2001, IDT, Ed. 1

1

Small craft less than 8 m length of hull Determination of maximum propulsion power rating

SANS 11601:2005/ISO 11601:1999, MOD, Ed. 1

1

Wheeled fire extinguishers - Performance and construction

SANS 11607-1:2007/ISO 11607-1:2006, IDT, Ed. 1

1

Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems

SANS 11607-2:2007/ISO 11607-2:2006, IDT, Ed. 1

1

Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes

SANS 11620:2009/ISO 11620:2008, IDT, Ed. 2

1

Information and documentation - Library performance indicators

SANS 11623:2006/ISO 11623:2002, IDT, Ed. 1

1

Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders

SANS 11629:2007/ISO 11629:2004, IDT, Ed. 1

1

Cranes - Measurement of the mass of a crane and its components

Page 202

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 11630:2007/ISO 11630:1997, IDT, Ed. 1

1

Cranes - Measurement of wheel alignment

SANS 11641:2010/ISO 11641:1993, IDT, Ed. 1

1

Leather - Tests for colour fastness - Colour fastness to perspiration

SANS 11644:2009/ISO 11644:1993, IDT, Ed. 1

1

Leather - Test for adhesion of finish

SANS 11648-1:2005/ISO 11648-1:2003, IDT, Ed. 1

1

Statistical aspects of sampling from bulk materials Part 1: General principles

SANS 11648-2:2005/ISO 11648-2:2001, IDT, Ed. 1

1

Statistical aspects of sampling from bulk materials Part 2: Sampling of particulate materials

SANS 11660-1:2009/ISO 11660-1:2008, IDT, Ed. 2

2

Cranes - Access, guards and restraints Part 1: General

SANS 11660-2:2007/ISO 11660-2:1994, IDT, Ed. 1

1

Cranes - Access, guards and restraints Part 2: Mobile cranes

SANS 11660-3:2009/ISO 11660-3:2008, IDT, Ed. 2

2

Cranes - Access, guards and restraints Part 3: Tower cranes

SANS 11661:2007/ISO 11661:1998, IDT, Ed. 1

1

Mobile cranes - Presentation of rated capacity charts

SANS 11662-1:2007/ISO 11662-1:1995, IDT, Ed. 1

1

Mobile cranes - Experimental determination of crane performance Part 1: Tipping loads and radii

SANS 11687-1:2005/ISO 11687-1:1995, IDT, Ed. 1

1

Plain bearings - Pedestal plain bearings Part 1: Pillow blocks

SANS 11687-2:2005/ISO 11687-2:1995, IDT, Ed. 1

1

Plain bearings - Pedestal plain bearings Part 2: Side flange bearings

SANS 11687-3:2005/ISO 11687-3:1995, IDT, Ed. 1

1

Plain bearings - Pedestal plain bearings Part 3: Centre flange bearings

SANS 11688-1:1995/ISO/TR 11688-1:1995, IDT, Ed. 1 (SABS ISO/TR 11688-1)

1

Acoustics - Recommended practice for the design of low-noise machinery and equipment Part 1: Planning

SANS 11688-2:1998/ISO/TR 11688-2:1998, IDT, Ed. 1 (SABS ISO/TR 11688-2)

1

Acoustics - Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design

SANS 11690-1:1996/ISO 11690-1:1996, IDT, Ed. 1 (SABS ISO 11690-1)

1

Acoustics - Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies

SANS 11690-2:1996/ISO 11690-2:1996, IDT, Ed. 1

1

Acoustics - Recommended practice for the design of low-noise workplaces containing machinery Part 2: Noise control measures

SANS 11690-3:1997/ISO/TR 11690-3:1997, IDT, Ed. 1 (SABS ISO/TR 11690-3)

1

Acoustics - Recommended practice for the design of low-noise workplaces containing machinery Part 3: Sound propagation and noise prediction in workrooms

SANS 11699-1:2005/ISO 11699-1:1998, IDT, Ed. 1

1

Non-destructive testing - Industrial radiographic films Part 1: Classification of film systems for industrial radiography

(SABS ISO 11690-2)

Page 203

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 11699-2:2005/ISO 11699-2:1998, IDT, Ed. 1

1

Non-destructive testing - Industrial radiographic films Part 2: Control of film processing by means of reference values

SANS 11722:2005/ISO 11722:1999, IDT, Ed. 1

1

Solid mineral fuels - Hard coal - Determination of moisture in the general analysis test sample by drying in nitrogen

SANS 11724:2007/ISO 11724:2004, IDT, Ed. 1

1

Solid mineral fuels - Determination of total fluorine in coal, coke and fly ash

SANS 11731:2008/ISO 11731:1998, IDT, Ed. 1

1

Water quality - Detection and enumeration of Legionella

SANS 11731-2:2009/ISO 11731-2:2004, IDT, Ed. 1

1

Water quality - Detection and enumeration of Legionella Part 2: Direct membrane filtration method for waters with low bacterial counts

SANS 11732:2006/ISO 11732:2005, IDT, Ed. 2

2

Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection

1

Classification of coals

(SABS ISO 11732) SANS 11760:2007/ISO 11760:2005, IDT, Ed. 1

SANS 11770-1:2004/ISO/IEC 11770-1:1996, IDT, Ed. 1 1

Information technology - Security techniques - Key management Part 1: Framework

SANS 11770-2:2008/ISO/IEC 11770-2:2008, IDT, Ed. 2 2

Information Technology - Security techniques - Key management Part 2: Mechanisms using symmetric techniques

SANS 11770-3:2009/ISO/IEC 11770-3:2008, IDT, Ed. 2 2

Information technology - Security techniques - Key management Part 3: Mechanisms using asymmetric techniques

SANS 11770-4:2007/ISO/IEC 11770-4:2006, IDT, Ed. 1

1

Information technology - Security techniques - Key management Part 4: Mechanisms based on weak secrets

SANS 11798:2006/ISO 11798:1999, IDT, Ed. 1

1

Information and documentation - Permanence and durability of writing, printing and copying on paper Requirements and test methods

SANS 11799:2005/ISO 11799:2003, IDT, Ed. 1

1

Information and documentation - Document storage requirements for archive and library materials

SANS 11801:2008/ISO/IEC 11801:2008, IDT, Ed. 2.1 2.01 (SABS ISO/IEC 11801)

Information technology - Generic cabling for customer premises

SANS 11812:2008/ISO 11812:2001, IDT, Ed. 1

1

Small craft - Watertight cockpits and quick-draining cockpits

SANS 11817:2003/ISO 1817:1999, IDT, Ed. 3

1

Rubber, vulcanized - Determination of the effect of liquids

SANS 11820:2008/ISO 1182:2002, IDT, Ed. 4

1

Reaction to fire tests for building products - Noncombustibility test

SANS 11843-1:2009/ISO 11843-1:1997, IDT, Ed. 1

1

Capability of detection Part 1: Terms and definitions

SANS 11843-2:2009/ISO 11843-2:2000, IDT, Ed. 1

1

Capability of detection Part 2: Methodology in the linear calibration case

Page 204

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 11843-3:2009/ISO 11843-3:2003, IDT, Ed. 1

1

Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used

SANS 11843-4:2009/ISO 11843-4:2003, IDT, Ed. 1

1

Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value

SANS 11843-5:2009/ISO 11843-5:2008, IDT, Ed. 1

1

Capability of detection Part 5: Methodology in the linear and non-linear calibration cases

SANS 11850:2003/ISO 11850:2003, IDT, Ed. 2

1

Machinery for forestry - Self-propelled machinery Safety requirements

SANS 11853:2003/ISO 1853:1998, IDT, Ed. 2

1

Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity

SANS 11857:1999/ISO 11857:1999, IDT, Ed. 1

1

Textile floor coverings - Determination of resistance to delamination

SANS 11870:2005/ISO 11870:2000, IDT, Ed. 1

1

Milk and milk products - Determination of fat content - General guidance on the use of butyrometric methods

SANS 11885:2008/ISO 11885:2007, IDT, Ed. 2

2

Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)

SANS 11890-1:2004/ISO 11890-1:2000, IDT, Ed. 1

1

Paints and varnishes - Determination of volatile organic compound (VOC) content Part 1: Difference method

SANS 11890-2:2004/ISO 11890-2:2000, IDT, Ed. 1

1

Paints and varnishes - Determination of volatile organic compound (VOC) content Part 2: Gaschromatographic method

SANS 11903:2006/ISO 11903:1996, IDT, Ed. 1

1

Tools for pressing - Guide pillar mountings

SANS 11922-1:1997/ISO 11922-1:1997, IDT, Ed. 1

1

Thermoplastics pipes for the conveyance of fluids Dimensions and tolerances Part 1: Metric series

SANS 11994:2008/ISO 11994:1997, IDT, Ed. 1

1

Cranes - Availability - Vocabulary

SANS 12004:1997/ISO 12004:1997, IDT, Ed. 1

1

Metallic materials - Guidelines for the determination of forming-limit diagrams

SANS 12029:2007/ISO/TS 12029:2007, IDT, Ed. 2

1

Electronic imaging - Forms design optimization for electronic image management

SANS 12043:2006/ISO 12043:1995, IDT, Ed. 1

1

Rolling bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides

SANS 12044:2006/ISO 12044:1995, IDT, Ed. 1

1

Rolling bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring nonthrust side

SANS 12098:2005/ISO 12098:2004, IDT, Ed. 2

2

Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 15-pole connector for vehicles with 24 V nominal supply voltage

1

Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components

(SABS ISO 11857)

(SABS ISO 11885)

(SABS ISO 11922-1)

(SABS ISO 12004)

(SABS ISO 12098)

SANS 12107:2003/EN 12107:1997, IDT, Ed. 1

Page 205

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 12128:2006/ISO 12128:2001, IDT, Ed. 2

1

Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes

SANS 12129-1:2006/ISO 12129-1:1995, IDT, Ed. 1

1

Plain bearings Part 1: Fits

SANS 12129-2:2006/ISO 12129-2:1995, IDT, Ed. 1

1

Plain bearings Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars

SANS 12142:2006/ISO 12142:2001, IDT, Ed. 1

1

Electronic imaging - Media error monitoring and reporting techniques for verification of stored data on optical digital data disks

SANS 12170:2004/ISO 12170:1996, IDT, Ed. 1

1

Gas welding equipment - Thermoplastic hoses for welding and allied processes

SANS 12173:2007/EN 12173:2005, IDT, Ed. 2

2

Chemicals used for treatment of water intended for human consumption - Sodium fluoride

SANS 12174:2007/EN 12174:2006, IDT, Ed. 2 (SABS EN 12174)

2

Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate

SANS 12175:2007/EN 12175:2006, IDT, Ed. 2

2

Chemicals used for treatment of water intended for human consumption - Hexafluorosilicic acid

SANS 12199:2008/ISO 12199:2000, IDT, Ed. 1

1

Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet

SANS 12200:2008/ISO 12200:1999, IDT, Ed. 1

1

Computer applications in terminology - Machinereadable terminology interchange format (MARTIF) Negotiated interchange

SANS 12207:2008/ISO/IEC 12207:2008, IDT, Ed. 2 (SABS ISO/IEC 12207)

2

Systems and software engineering - Software life cycle processes

SANS 12215-1:2008/ISO 12215-1:2000, IDT, Ed. 1

1

Small craft - Hull construction and scantlings Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate

SANS 12215-2:2008/ISO 12215-2:2002, IDT, Ed. 1

1

Small craft - Hull construction and scantlings Part 2: Materials: Core materials for sandwich construction, embedded materials

SANS 12215-3:2008/ISO 12215-3:2002, IDT, Ed. 1

1

Small craft - Hull construction and scantlings Part 3: Materials: Steel, aluminium alloys, wood, other materials

SANS 12215-4:2008/ISO 12215-4:2002, IDT, Ed. 1

1

Small craft - Hull construction and scantlings Part 4: Workshop and manufacturing

SANS 12215-5:2009/ISO 12215-5:2008, IDT, Ed. 1

1

Small craft - Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination

SANS 12215-6:2009/ISO 12215-6:2008, IDT, Ed. 1

1

Small craft - Hull construction and scantlings Part 6: Structural arrangements and details

SANS 12216:2008/ISO 12216:2002, IDT, Ed. 1

1

Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements

SANS 12217-1:2008/ISO 12217-1:2002, IDT, Ed. 1

1

Small craft - Stability and buoyancy assessment and categorization Part 1: Non-sailing boats of hull length greater than or equal to 6 m

(SABS EN 12173)

(SABS EN 12175)

Page 206

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 12217-2:2008/ISO 12217-2:2002, IDT, Ed. 1

1

Small craft - Stability and buoyancy assessment and categorization Part 2: Sailing boats of hull length greater than or equal to 6 m

SANS 12217-3:2008/ISO 12217-3:2002, IDT, Ed. 1

1

Small craft - Stability and buoyancy assessment and categorization Part 3: Boats of hull length less than 6m

SANS 12240-1:2005/ISO 12240-1:1998, IDT, Ed. 1

1

Spherical plain bearings Part 1: Radial spherical plain bearings

SANS 12240-2:2006/ISO 12240-2:1998, IDT, Ed. 1

1

Spherical plain bearings Part 2: Angular contact radial spherical plain bearings

SANS 12240-3:2005/ISO 12240-3:1998, IDT, Ed. 1

1

Spherical plain bearings Part 3: Thrust spherical plain bearings

SANS 12240-4:2005/ISO 12240-4:1998, IDT, Ed. 1

1

Spherical plain bearings Part 4: Spherical plain bearing rod ends

SANS 12277:1998/EN 12277:1998, IDT, Ed. 1 (SABS EN 12277)

1

Mountaineering equipment - Harnesses - Safety requirements and test methods

SANS 12281:2005/EN 12281:2002, IDT, Ed. 1

1

Printing and business paper - Requirements for copy paper for dry toner imaging processes

SANS 12293:1999/EN 12293:1999, IDT, Ed. 1 (SABS EN 12293)

1

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling

SANS 12294:1999/EN 12294:1999, IDT, Ed. 1 (SABS EN 12294)

1

Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum

SANS 12295:1999/EN 12295:1999, IDT, Ed. 1

1

Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling

SANS 12301:2005/ISO 12301:1992, IDT, Ed. 1

1

Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics

SANS 12302:2005/ISO 12302:1993, IDT, Ed. 1

1

Plain bearings - Quality characteristics - Statistical process control (SPC)

SANS 12306:2005/ISO 12306:1994, IDT, Ed. 1

1

Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes

SANS 12307-1:2006/ISO 12307-1:1994, IDT, Ed. 1

1

Plain bearings - Wrapped bushes Part 1: Checking the outside diameter

SANS 12308:2005/ISO 12308:1994, IDT, Ed. 1

1

Plain bearings - Quality assurance - Sample types Definitions, applications and testing

SANS 12353:2008/EN 12353:2006, IDT, Ed. 2

2

Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal, mycobactericidal, sporicidal and fungicidal activity

SANS 12401:2008/ISO 12401:2004, IDT, Ed. 1

1

Small craft - Deck safety harness and safety line for use on recreational craft - Safety requirements and test methods

SANS 12402-1:2007/ISO 12402-1:2005, IDT, Ed. 1

1

Personal flotation devices Part 1: Lifejackets for seagoing ships - Safety requirements

(SABS EN 12295)

(SABS EN 12353)

Page 207

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 12402-2:2007/ISO 12402-2:2006, IDT, Ed. 1

1

Personal flotation devices Part 2: Lifejackets, performance level 275 - Safety requirements

SANS 12402-3:2007/ISO 12402-3:2006, IDT, Ed. 1

1

Personal flotation devices Part 3: Lifejackets, performance level 150 - Safety requirements

SANS 12402-4:2007/ISO 12402-4:2006, IDT, Ed. 1

1

Personal flotation devices Part 4: Lifejackets, performance level 100 - Safety requirements

SANS 12402-5:2007/ISO 12402-5:2006, IDT, Ed. 1

1

Personal flotation devices Part 5: Buoyancy aids (level 50) - Safety requirements

SANS 12402-6:2007/ISO 12402-6:2006, IDT, Ed. 1

1

Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids - Safety requirements and additional test methods

SANS 12402-7:2007/ISO 12402-7:2006, IDT, Ed. 1

1

Personal flotation devices Part 7: Materials and components - Safety requirements and test methods

SANS 12402-8:2007/ISO 12402-8:2006, IDT, Ed. 1

1

Personal flotation devices Part 8: Accessories Safety requirements and test methods

SANS 12402-9:2007/ISO 12402-9:2006, IDT, Ed. 1

1

Personal flotation devices Part 9: Test methods

SANS 12402-10:2007/ISO 12402-10:2006, IDT, Ed. 1 1

Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices

SANS 12469:2002/EN 12469:2000, IDT, Ed. 1

1

Biotechnology - Performance criteria for microbiological safety cabinets

SANS 12478-1:2006/ISO 12478-1:1997, IDT, Ed. 1

1

Cranes - Maintenance manual Part 1: General

SANS 12480-1:2006/ISO 12480-1:1997, IDT, Ed. 1

1

Cranes - Safe use Part 1: General

SANS 12480-3:2007/ISO 12480-3:2005, IDT, Ed. 1

1

Cranes - Safe use Part 3: Tower cranes

SANS 12482-1:2008/ISO 12482-1:1995, IDT, Ed. 1

1

Cranes - Condition monitoring Part 1: General

SANS 12485:2007/ISO 12485:1998, IDT, Ed. 1

1

Tower cranes - Stability requirements

SANS 12488-1:2007/ISO 12488-1:2005, IDT, Ed. 1

1

Cranes - Tolerances for wheels and travel and traversing tracks Part 1: General

SANS 12509:2008/ISO 12509:2004, IDT, Ed. 2

2

Earth-moving machinery - Lighting, signalling and marking lights, and reflex-reflector devices

SANS 12615:2008/ISO 12615:2004, IDT, Ed. 1

1

Bibliographic references and source identifiers for terminology work

SANS 12616:2004/ISO 12616:2002, IDT, Ed. 1

1

Translation-oriented terminography

SANS 12620:2008/ISO 12620:1999, IDT, Ed. 1

1

Computer applications in terminology - Data categories

Page 208

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 12651:2005/ISO 12651:1999, IDT, Ed. 1

1

Electronic imaging - Vocabulary

SANS 12653-1:2006/ISO 12653-1:2000, IDT, Ed. 1

1

Electronic imaging - Test target for the black-andwhite scanning of office documents Part 1: Characteristics

SANS 12653-2:2006/ISO 12653-2:2000, IDT, Ed. 1

1

Electronic imaging - Test target for the black-andwhite scanning of office documents Part 2: Method of use

SANS 12710:2003/ISO 12710:2002, IDT, Ed. 1

1

Non-destructive testing - Ultrasonic inspection Evaluating electronic characteristics of ultrasonic test instruments

SANS 12715:2004/ISO 12715:1999, IDT, Ed. 1

1

Ultrasonic non-destructive testing - Reference blocks and test procedures for the characterization of contact search unit beam profiles

SANS 12716:2004/ISO 12716:2001, IDT, Ed. 1

1

Non-destructive testing - Acoustic emission inspection - Vocabulary

SANS 12718:2010/ISO 12718:2008, IDT, Ed. 1

1

Non-destructive testing - Eddy current testing Vocabulary

SANS 12721:2004/ISO 12721:2000, IDT, Ed. 1

1

Non-destructive testing - Thermal neutron radiographic testing - Determination of beam L/D ratio

SANS 12756:2009/ISO 12756:1998, IDT, Ed. 1

1

Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary

SANS 12885:2009/ISO/TR 12885:2008, IDT, Ed. 1

1

Nanotechnologies - Health and safety practices in occupational settings relevant to nanotechnologies

SANS 12902:2007/ISO/TS 12902:2001, IDT, Ed. 1

1

Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods

SANS 12941:1998/EN 12941:1998, IDT, Ed. 1

1

Respiratory protective devices - Powered filtering devices incorporating a helmet or a hood Requirements, testing, marking

SANS 12942:1998/EN 12942:1998, IDT, Ed. 1 (SABS EN 12942)

1

Respiratory protective devices - Power assisted filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking

SANS 12944-1:1998/ISO 12944-1:1998, IDT, Ed. 1 (SABS ISO 12944-1)

1

Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 1: General introduction

SANS 12944-2:1998/ISO 12944-2:1998, IDT, Ed. 1

1

Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 2: Classification of environments

SANS 12944-3:1998/ISO 12944-3:1998, IDT, Ed. 1 (SABS ISO 12944-3)

1

Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 3: Design considerations

SANS 12944-4:1998/ISO 12944-4:1998, IDT, Ed. 1

1

Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 4: Types of surface and surface preparation

SANS 12944-5:1998/ISO 12944-5:1998, IDT, Ed. 1 (SABS ISO 12944-5)

1

Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems

SANS 12944-6:1998/ISO 12944-6:1998, IDT, Ed. 1

1

Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods

(SABS EN 12941)

(SABS ISO 12944-2)

(SABS ISO 12944-4)

(SABS ISO 12944-6)

Page 209

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 12944-7:1998/ISO 12944-7:1998, IDT, Ed. 1 (SABS ISO 12944-7)

1

Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 7: Execution and supervision of paint work

SANS 12944-8:1998/ISO 12944-8:1998, IDT, Ed. 1

1

Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 8: Development of specifications for new work and maintenance

SANS 12951:2004/ISO 12951:1999, IDT, Ed. 1

1

Textile floor coverings - Determination of mass loss using the Lisson test

SANS 13006:2003/ISO 13006:1998, IDT, Ed. 1

1

Ceramic tiles - Definitions, classification, characteristics and marking

SANS 13202:2007/ISO 13202:2003, IDT, Ed. 1

1

Cranes - Measurement of velocity and time parameters

SANS 13203:2007/ISO 13203:2005, IDT, Ed. 1

1

Chains, sprockets and accessories - List of equivalent terms

SANS 13253:2003/ISO 13253:1995, IDT, Ed. 1

1

Ducted air-conditioners and air-to-air heat pumps Testing and rating for performance

SANS 13297:2008/ISO 13297:2000, IDT, Ed. 2

1

Small craft - Electrical systems - Alternating current installations

SANS 13302:2008/ISO 13302:2003, IDT, Ed. 1

1

Sensory analysis - Methods for assessing modifications to the flavour of foodstuffs due to packaging

(SABS ISO 12944-8)

SANS 13335-1:2005/ISO/IEC 13335-1:2004, IDT, Ed. 1 1

Information technology - Security techniques Management of information and communications technology security Part 1: Concepts and models for information and communications technology security management

SANS 13335-3:2002/ISO/IEC TR 13335-3:1998, IDT, 1 Ed. 1

Information technology - Guidelines for the management of IT security Part 3: Techniques for the management of IT Security

SANS 13335-4:2002/ISO/IEC TR 13335-4:2000, IDT, 1 Ed. 1

Information technology - Guidelines for the management of IT security Part 4: Selection of safeguards

SANS 13335-5:2002/ISO/IEC TR 13335-5:2001, IDT, 1 Ed. 1

Information technology - Guidelines for the management of IT security Part 5: Management guidance on network security

SANS 13342:2008/ISO 13342:1995, IDT, Ed. 1

1

Small craft - Static thrust measurement for outboard motors

SANS 13370:2009/ISO 13370:2007, IDT, Ed. 2

1

Thermal performance of buildings - Heat transfer via the ground - Calculation methods

SANS 13395:1996/ISO 13395:1996, IDT, Ed. 1 (SABS ISO 13395)

1

Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection

SANS 13425:2005/ISO/TR 13425:2003, IDT, Ed. 2

1

Guidelines for the selection of statistical methods in standardization and specification

SANS 13474:2005/ISO/TS 13474:2003, IDT, Ed. 1

1

Acoustics - Impulse sound propagation for environmental noise assessment

Page 210

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 13475-1:1999/ISO 13475-1:1999, IDT, Ed. 1 (SABS ISO 13475-1)

1

Acoustics - Stationary audible warning devices used outdoors Part 1: Field measurements for determination of sound emission quantities

SANS 13485:2004/ISO 13485:2003, IDT, Ed. 2

1

Medical devices - Quality management systems Requirements for regulatory purposes

SANS 13528:2009/ISO 13528:2005, IDT, Ed. 1

1

Statistical methods for use in proficiency testing by interlaboratory comparisons

SANS 13563-1:2007/ISO 13563-1:2001, IDT, Ed. 1

1

Single side loading fork-lift trucks Part 1: Stability tests

SANS 13563-2:2007/ISO 13563-2:2001, IDT, Ed. 1

1

Single side loading fork-lift trucks Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above

SANS 13590:2008/ISO 13590:2003, IDT, Ed. 2

1

Small craft - Personal watercraft - Construction and system installation requirements

SANS 13591:2008/ISO 13591:1997, IDT, Ed. 1

1

Small craft - Portable fuel systems for outboard motors

SANS 13592:2008/ISO 13592:1998, IDT, Ed. 1

1

Small craft - Backfire flame control for petrol engines

SANS 13631:2003/ISO 13631:2002, IDT, Ed. 1

1

Petroleum and natural gas industries - Packaged reciprocating gas compressors

SANS 13720:2009/ISO 13720:1995, IDT, Ed. 1

1

Meat and meat products - Enumeration of Pseudomonas spp.

SANS 13746:2000/ISO 13746:2000, IDT, Ed. 1 (SABS ISO 13746)

1

Textile floor coverings - Guidelines for installation and use on stairs

SANS 13760:1998/ISO 13760:1998, IDT, Ed. 1

1

Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage

(SABS ISO 13760) SANS 13818-1:2008/ISO/IEC 13818-1:2007, IDT, Ed. 3 3 (SABS ISO/IEC 13818-1)

Information technology - Generic coding of moving pictures and associated audio information: Systems

SANS 13818-2:2003/ISO/IEC 13818-2:2000, IDT, Ed. 2 2 (SABS ISO/IEC 13818-2)

Information technology - Generic coding of moving pictures and associated audio information: Video

SANS 13818-3:1998/ISO/IEC 13818-3:1998, IDT, Ed. 2 2 (SABS ISO/IEC 13818-3)

Information technology - Generic coding of moving pictures and associated audio information Part 3: Audio

SANS 13843:2004/ISO/TR 13843:2000, IDT, Ed. 1

Water quality - Guidance on validation of microbiological methods

1

SANS 13888-1:2010/ISO/IEC 13888-1:2009, IDT, Ed. 2 3

Information technology - Security techniques - Nonrepudiation Part 1: General

SANS 13888-2:2004/ISO/IEC 13888-2:1998, IDT, Ed. 1 1

Information technology - Security techniques - Nonrepudiation Part 2: Mechanisms using symmetric techniques

SANS 13888-3:2004/ISO/IEC 13888-3:1997, IDT, Ed. 1 1

Information technology - Security techniques - Nonrepudiation Part 3: Mechanisms using asymmetric techniques

Page 211

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 13909-1:2001/ISO 13909-1:2001, IDT, Ed. 1 (SABS ISO 13909-1)

1

Hard coal and coke - Mechanical sampling Part 1: General introduction

SANS 13909-2:2001/ISO 13909-2:2001, IDT, Ed. 1

1

Hard coal and coke - Mechanical sampling Part 2: Coal - Sampling from moving streams

SANS 13909-3:2002/ISO 13909-3:2001, IDT, Ed. 1 (SABS ISO 13909-3)

1

Hard coal and coke - Mechanical sampling Part 3: Coal - Sampling from stationary lots

SANS 13909-4:2002/ISO 13909-4:2001, IDT, Ed. 1

1

Hard coal and coke - Mechanical sampling Part 4: Coal - Preparation of test samples

SANS 13909-5:2001/ISO 13909-5:2001, IDT, Ed. 1 (SABS ISO 13909-5)

1

Hard coal and coke - Mechanical sampling Part 5: Coke - Sampling from moving streams

SANS 13909-6:2001/ISO 13909-6:2001, IDT, Ed. 1

1

Hard coal and coke - Mechanical sampling Part 6: Coke - Preparation of test samples

SANS 13909-7:2001/ISO 13909-7:2001, IDT, Ed. 1 (SABS ISO 13909-7)

1

Hard coal and coke - Mechanical sampling Part 7: Methods for determining the precision of sampling, sample preparation and testing

SANS 13909-8:2001/ISO 13909-8:2001, IDT, Ed. 1

1

Hard coal and coke - Mechanical sampling Part 8: Methods of testing for bias

SANS 13929:2008/ISO 13929:2001, IDT, Ed. 1

1

Small craft - Steering gear - Geared link systems

SANS 13934-1:1999/ISO 13934-1:1999, IDT, Ed. 1

1

Textiles - Tensile properties of fabrics Part 1: Determination of maximum force and elongation at maximum force using the strip method

SANS 13934-2:2008/ISO 13934-2:1999, IDT, Ed. 1

1

Textiles - Tensile properties of fabrics Part 2: Determination of maximum force using the grab method

SANS 13937-3:2007/ISO 13937-3:2000, IDT, Ed. 1

1

Textiles - Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)

SANS 13937-4:2007/ISO 13937-4:2000, IDT, Ed. 1

1

Textiles - Tear properties of fabrics Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)

SANS 13938-1:1999/ISO 13938-1:1999, IDT, Ed. 1

1

Textiles - Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension

SANS 13964:2004/ISO 13964:1998, IDT, Ed. 1

1

Air quality - Determination of ozone in ambient air Ultraviolet photometric method

SANS 14001:2005/ISO 14001:2004, IDT, Ed. 2

2

Environmental management systems Requirements with guidance for use

SANS 14004:2005/ISO 14004:2004, IDT, Ed. 2 (SABS ISO 14004)

2

Environmental management systems - General guidelines on principles, systems and support techniques

SANS 14015:2003/ISO 14015:2001, IDT, Ed. 1

1

Environmental management - Environmental assessment of sites and organizations (EASO)

SANS 14020:2003/ISO 14020:2000, IDT, Ed. 2 (SABS ISO 14020)

2

Environmental labels and declarations - General principles

SANS 14021:1999/ISO 14021:1999, IDT, Ed. 1

1

Environmental labels and declarations - Selfdeclared environmental claims (Type II environmental labelling)

(SABS ISO 13909-2)

(SABS ISO 13909-4)

(SABS ISO 13909-6)

(SABS ISO 13909-8)

(SABS ISO 13934-1)

(SABS ISO 13938-1)

(SABS ISO 14001)

(SABS ISO 14021)

Page 212

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 14024:1999/ISO 14024:1999, IDT, Ed. 1 (SABS ISO 14024)

1

Environmental labels and declarations - Type I environmental labelling - Principles and procedures

SANS 14025:2006/ISO 14025:2006, IDT, Ed. 1

1

Environmental labels and declarations - Type III environmental declarations - Principles and procedures

SANS 14031:1999/ISO 14031:1999, IDT, Ed. 1 (SABS ISO 14031)

1

Environmental management - Environmental performance evaluation - Guidelines

SANS 14040:2006/ISO 14040:2006, IDT, Ed. 2

2

Environmental management - Life cycle assessment - Principles and framework

SANS 14041:1998/ISO 14041:1998, IDT, Ed. 1 (SABS ISO 14041)

1

Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis

SANS 14042:2000/ISO 14042:2000, IDT, Ed. 1

1

Environmental management - Life cycle assessment - Life cycle impact assessment

SANS 14043:2000/ISO 14043:2000, IDT, Ed. 1 (SABS ISO 14043)

1

Environmental management - Life cycle assessment - Life cycle interpretation

SANS 14044:2006/ISO 14044:2006, IDT, Ed. 1

1

Environmental management - Life cycle assessment - Requirements and guidelines

SANS 14047:2005/ISO/TR 14047:2003, IDT, Ed. 1

1

Environmental management - Life cycle impact assessment - Examples of application of SANS 14042

SANS 14048:2003/ISO/TS 14048:2002, IDT, Ed. 1

1

Environmental management - Life cycle assessment - Data documentation format

SANS 14049:2003/ISO/TR 14049:2000, IDT, Ed. 1

1

Environmental management - Life cycle assessment - Examples of application of ISO 14041 to goal and scope definition and inventory analysis

SANS 14050:2009/ISO 14050:2009, IDT, Ed. 3

3

Environmental management - Vocabulary

SANS 14062:2005/ISO/TR 14062:2002, IDT, Ed. 1

1

Environmental management - Integrating environmental aspects into product design and development

SANS 14063:2006/ISO 14063:2006, IDT, Ed. 1

1

Environmental management - Environmental communication - Guidelines and examples

SANS 14064-1:2006/ISO 14064-1:2006, IDT, Ed. 1

1

Greenhouse gases Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals

SANS 14064-2:2006/ISO 14064-2:2006, IDT, Ed. 1

1

Greenhouse gases Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission, reductions or removal enhancements

SANS 14064-3:2006/ISO 14064-3:2006, IDT, Ed. 1

1

Greenhouse gases Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions

SANS 14065:2007/ISO 14065:2007, IDT, Ed. 1

1

Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition

SANS 14102:2009/ISO/IEC 14102:2008, IDT, Ed. 2

2

Information technology - Guideline for the evaluation and selection of CASE tools

(SABS ISO 14040)

(SABS ISO 14042)

(SABS ISO 14050)

(SABS ISO/IEC 14102)

Page 213

Standards available in electronic format (PDF) May

SANS Number SANS 14113:2004/ISO 14113:1997, IDT, Ed. 1

2010

Edition Title 1

Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar

SANS 14143-1:2008/ISO/IEC 14143-1:2007, IDT, Ed. 2 2 (SABS ISO/IEC 14143-1)

Information technology - Software measurement Functional size measurement Part 1: Definition of concepts

SANS 14143-2:2003/ISO/IEC 14143-2:2002, IDT, Ed. 1 1

Information Technology - Software measurement Functional size measurement Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998

SANS 14143-3:2004/ISO/IEC TR 14143-3:2003, IDT, 1 Ed. 1

Information technology - Software measurement Functional size measurement Part 3: Verification of functional size measurement methods

SANS 14143-4:2003/ISO/IEC TR 14143-4:2002, IDT, 1 Ed. 1

Information Technology - Software measurement Functional size measurement Part 4: Reference model

SANS 14143-5:2004/ISO/IEC TR 14143-5:2004, IDT, 1 Ed. 1

Information technology - Software measurement Functional size measurement Part 5: Determination of functional domains for use with functional size measurement

SANS 14143-6:2009/ISO/IEC 14143-6:2006, IDT, Ed. 1 1

Information technology - Software measurement Functional size measurement Part 6: Guide for use of ISO/IEC 14143 series and related international standards

SANS 14159:2006/ISO 14159:2002, IDT, Ed. 1

1

Safety of machinery - Hygiene requirements for the design of machinery

SANS 14180:1998/ISO 14180:1998, IDT, Ed. 1

1

Solid mineral fuels - Guidance on the sampling of coal seams

SANS 14227:2008/ISO 14227:2001, IDT, Ed. 1

1

Small craft - Magnetic compasses

SANS 14236:2003/ISO 14236:2000, IDT, Ed. 1

1

Plastics pipes and fittings - Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems

SANS 14341:2009/ISO 14341:2002, IDT, Ed. 1

1

Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification

SANS 14356:2008/ISO 14356:2003, IDT, Ed. 1

1

Dentistry - Duplicating material

SANS 14403:2002/ISO 14403:2002, IDT, Ed. 1

1

Water quality - Determination of total cyanide and free cyanide by continuous flow analysis

SANS 14416:2005/ISO 14416:2003, IDT, Ed. 1

1

Information and documentation - Requirements for binding of books, periodicals, serials and other paper documents for archive and library use Methods and materials

(SABS ISO 14180)

SANS 14443-1:2000/ISO/IEC 14443-1:2000, IDT, Ed. 1 1 (SABS ISO/IEC 14443-1)

Identification cards - Contactless integrated circuit(s) cards - Proximity cards Part 1: Physical characteristics

SANS 14443-2:2004/ISO/IEC 14443-2:2001, IDT, Ed. 1 1

Identification cards - Contactless integrated circuit(s) cards - Proximity cards Part 2: Radio frequency power and signal interface

Page 214

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 14443-3:2004/ISO/IEC 14443-3:2001, IDT, Ed. 1 1

Identification cards - Contactless integrated circuit(s) cards - Proximity cards Part 3: Initialization and anticollision

SANS 14443-4:2004/ISO/IEC 14443-4:2001, IDT, Ed. 1 1

Identification cards - Contactless integrated circuit(s) cards - Proximity cards Part 4: Transmission protocol

SANS 14471:2009/ISO/IEC TR 14471:2007, IDT, Ed. 2 2 (SABS ISO/IEC TR 14471)

Information technology - Software engineering Guidelines for the adoption of CASE tools

SANS 14509-1:2009/ISO 14509-1:2008, IDT, Ed. 1

1

SANS 14516:2003/ISO/IEC TR 14516:2002, IDT, Ed. 1 1

Small craft - Airborne sound emitted by powered recreational craft Part 1: Pass-by measurement procedures Information technology - Security techniques Guidelines for the use and management of Trusted Third Party services

SANS 14518:2008/ISO 14518:2005, IDT, Ed. 1

1

Cranes - Requirements for test loads

SANS 14520-1:2008/ISO 14520-1:2006, IDT, Ed. 2

2

Gaseous fire-extinguishing systems - Physical properties and system design Part 1: General requirements

SANS 14520-2:2008/ISO 14520-2:2006, IDT, Ed. 2 (SABS ISO 14520-2)

2

Gaseous fire-extinguishing systems - Physical properties and system design Part 2: CF3I extinguishant

SANS 14520-5:2008/ISO 14520-5:2006, IDT, Ed. 1

1

Gaseous fire-extinguishing systems - Physical properties and system design Part 5: FK-5-1-12 extinguishant

SANS 14520-6:2008/ISO 14520-6:2006, IDT, Ed. 2 (SABS ISO 14520-6)

2

Gaseous fire-extinguishing systems - Physical properties and system design Part 6: HCFC blend A extinguishant

SANS 14520-8:2008/ISO 14520-8:2006, IDT, Ed. 2

2

Gaseous fire-extinguishing systems - Physical properties and system design Part 8: HFC 125 extinguishant

2

Gaseous fire-extinguishing systems - Physical properties and system design Part 9: HFC 227ea extinguishant

(SABS ISO 14520-1)

(SABS ISO 14520-8) SANS 14520-9:2008/ISO 14520-9:2006, IDT, Ed. 2 (SABS ISO 14520-9)

SANS 14520-10:2008/ISO 14520-10:2005, IDT, Ed. 2 2 (SABS ISO 14520-10)

Gaseous fire-extinguishing systems - Physical properties and system design Part 10: HFC 23 extinguishant

SANS 14520-11:2008/ISO 14520-11:2005, IDT, Ed. 2 2 (SABS ISO 14520-11)

Gaseous fire-extinguishing systems - Physical properties and system design Part 11: HFC 236fa extinguishant

SANS 14520-12:2008/ISO 14520-12:2005, IDT, Ed. 2 2 (SABS ISO 14520-12)

Gaseous fire-extinguishing systems - Physical properties and system design Part 12: IG-01 extinguishant

SANS 14520-13:2008/ISO 14520-13:2005, IDT, Ed. 2 2 (SABS ISO 14520-13)

Gaseous fire-extinguishing systems - Physical properties and system design Part 13: IG-100 extinguishant

SANS 14520-14:2008/ISO 14520-14:2005, IDT, Ed. 2 2 (SABS ISO 14520-14)

Gaseous fire-extinguishing systems - Physical properties and system design Part 14: IG-55 extinguishant

SANS 14520-15:2008/ISO 14520-15:2005, IDT, Ed. 2 2 (SABS ISO 14520-15)

Gaseous fire-extinguishing systems - Physical properties and system design Part 15: IG-541 extinguishant

Page 215

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 14557:2007/ISO 14557:2002, IDT, Ed. 1

1

Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies

SANS 14560:2009/ISO 14560:2004, IDT, Ed. 1

1

Acceptance sampling procedures by attributes Specified quality levels in nonconfirming items per million

SANS 14577-1:2009/ISO 14577-1:2002, IDT, Ed. 1

1

Metallic materials - Instrumented indentation test for hardness and materials parameters Part 1: Test method

SANS 14577-2:2009/ISO 14577-2:2002, IDT, Ed. 1

1

Metallic materials - Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines

SANS 14577-3:2009/ISO 14577-3:2002, IDT, Ed. 1

1

Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks

SANS 14598-1:1999/ISO/IEC 14598-1:1999, IDT, Ed. 1 1 (SABS ISO/IEC 14598-1)

Information technology - Software product evaluation Part 1: General overview

SANS 14598-2:2003/ISO/IEC 14598-2:2000, IDT, Ed. 1 1

Software engineering - Product evaluation Part 2: Planning and management

SANS 14598-3:2003/ISO/IEC 14598-3:2000, IDT, Ed. 1 1

Software engineering - Product evaluation Part 3: Process for developers

SANS 14598-4:2003/ISO/IEC 14598-4:1999, IDT, Ed. 1 1

Software engineering - Product evaluation Part 4: Process for acquirers

SANS 14598-5:1998/ISO/IEC 14598-5:1998, IDT, Ed. 1 1 (SABS ISO/IEC 14598-5)

Information technology - Software product evaluation Part 5: Process for evaluators

SANS 14598-6:2003/ISO/IEC 14598-6:2001, IDT, Ed. 1 1

Software engineering - Product evaluation Part 6: Documentation of evaluation modules

SANS 14644-1:1999/ISO 14644-1:1999, IDT, Ed. 1

1

Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness

SANS 14644-2:2003/ISO 14644-2:2000, IDT, Ed. 1

1

Cleanrooms and associated controlled environments Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1

SANS 14644-4:2003/ISO 14644-4:2001, IDT, Ed. 1

1

Cleanrooms and associated controlled environments Part 4: Design, construction and start-up

SANS 14692-1:2009/ISO 14692-1:2002, IDT, Ed. 1

1

Petroleum and natural gas industries - Glassreinforced plastics (GRP) piping Part 1: Vocabulary, symbols, applications and materials

SANS 14692-2:2009/ISO 14692-2:2002, IDT, Ed. 1

1

Petroleum and natural gas industries - Glassreinforced plastics (GRP) piping Part 2: Qualification and manufacture

SANS 14692-3:2009/ISO 14692-3:2002, IDT, Ed. 1

1

Petroleum and natural gas industries - Glassreinforced plastics (GRP) piping Part 3: System design

SANS 14692-4:2009/ISO 14692-4:2002, IDT, Ed. 1

1

Petroleum and natural gas industries - Glassreinforced plastics (GRP) piping Part 4: Fabrication, installation and operation

(SABS ISO 14644-1)

Page 216

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 14713:1999/ISO 14713:1999, IDT, Ed. 1 (SABS ISO 14713)

1

Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings Guidelines

SANS 14756:2003/ISO/IEC 14756:1999, IDT, Ed. 1

1

Information technology - Measurement and rating of performance of computer-based software systems

SANS 14759:2003/ISO/IEC TR 14759:1999, IDT, Ed. 1 1

Software engineering - Mock up and prototype - A categorization of software mock up and prototype models and their use

SANS 14764:2009/ISO/IEC 14764:2006, IDT, Ed. 2

2

Software Engineering - Software Life Cycle Processes - Maintenance

SANS 14788:2007/ISO 14788:2005, IDT, Ed. 2 (SABS ISO 14788)

2

Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet

SANS 14798:2009/ISO 14798:2009, IDT, Ed. 1

3

Lifts (elevators), escalators and moving walks - Risk assessment and reduction methodology

SANS 14817:2007/ISO 14817:2002, IDT, Ed. 1

1

Transport information and control systems Requirements for an ITS/TICS central Data Registry and ITS/TICS Data Dictionaries

SANS 14888-1:2009/ISO/IEC 14888-1:2008, IDT, Ed. 2 2

Information technology - Security techniques Digital signatures with appendix Part 1: General

SANS 14888-2:2009/ISO/IEC 14888-2:2008, IDT, Ed. 2 2

Information technology - Security techniques Digital signatures with appendix Part 2: Integer factorization based mechanisms

SANS 14888-3:2007/ISO/IEC 14888-3:2006, IDT, Ed. 2 2

Information technology - Security techniques Digital signatures with appendix Part 3: Discrete logarithm based mechanisms

SANS 14895:2008/ISO 14895:2000, IDT, Ed. 1

1

Small craft - Liquid-fuelled galley stoves

SANS 14906:2009/ISO 14906:2004, IDT, Ed. 1

1

Road transport and traffic telematics - Electronic fee collection - Application interface definition for dedicated short-range communication

SANS 14907-1:2007/ISO/TS 14907-1:2005, IDT, Ed. 1

1

Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment Part 1: Description of test procedures

SANS 14907-2:2007/ISO/TS 14907-2:2006, IDT, Ed. 1

1

Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment Part 2: Conformance test for the onboard unit application interface

SANS 14945:2009/ISO 14945:2004, IDT, Ed. 1

1

Small craft - Builder's plate

SANS 14946:2008/ISO 14946:2001, IDT, Ed. 1

1

Small craft - Maximum load capacity

SANS 14969:2006/ISO/TR 14969:2004, IDT, Ed. 1

1

Medical devices - Quality management systems Guidance on the application of ISO 13485:2003

SANS 14971:2008/ISO 14971:2007, IDT, Ed. 2

2

Medical devices - Application of risk management to medical devices

SANS 15005:2007/ISO 15005:2002, IDT, Ed. 1

1

Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures

Page 217

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 15006:2007/ISO 15006:2004, IDT, Ed. 1

1

Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle auditory presentation

SANS 15008:2007/ISO 15008:2003, IDT, Ed. 1

1

Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle visual presentation

SANS 15026:1998/ISO/IEC 15026:1998, IDT, Ed. 1

1

Information technology - System and software integrity levels

SANS 15083:2008/ISO 15083:2003, IDT, Ed. 1

1

Small craft - Bilge-pumping systems

SANS 15084:2008/ISO 15084:2003, IDT, Ed. 1

1

Small craft - Anchoring, mooring and towing - Strong points

SANS 15085:2008/ISO 15085:2003, IDT, Ed. 1

1

Small craft - Man-overboard prevention and recovery

SANS 15117-1:2006/ISO 15117-1:2004, IDT, Ed. 1

1

Coal flow properties Part 1: Bin flow

SANS 15127:2005/ISO 5127:2001, IDT, Ed. 1

1

Information and documentation - Vocabulary

SANS 15161:2003/ISO 15161:2001, IDT, Ed. 1

1

Guidelines on the application of ISO 9001:2000 for the food and drink industry

SANS 15188:2009/ISO 15188:2001, IDT, Ed. 1

1

Project management guidelines for terminology standardization

SANS 15189:2009/ISO 15189:2007, IDT, Ed. 2

2

Medical laboratories - Particular requirements for quality and competence

SANS 15214:1998/ISO 15214:1998, IDT, Ed. 1 (SABS ISO 15214)

1

Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of mesophilic lactic acid bacteria - Colony-count technique at 30 °C

SANS 15223:2006/ISO 15223:2000, IDT, Ed. 2

1

Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied

SANS 15237:2004/ISO 15237:2003, IDT, Ed. 1

1

Solid mineral fuels - Determination of total mercury content of coal

SANS 15238:2004/ISO 15238:2003, IDT, Ed. 1

1

Solid mineral fuels - Determination of total cadmium content of coal

SANS 15239:2006/ISO 15239:2005, IDT, Ed. 1

1

Solid mineral fuels - Evaluation of the measurement performance of on-line analysers

(SABS ISO/IEC 15026)

SANS 15271:1998/ISO/IEC TR 15271:1998, IDT, Ed. 1 1 (SABS ISO/IEC TR 15271)

Information technology - Guide for ISO/IEC 12207 (Software Life Cycle Processes)

SANS 15288:2008/ISO/IEC 15288:2008, IDT, Ed. 2

2

Systems and software engineering - Systems life cycle processes

SANS 15289:2007/ISO/IEC 15289:2006, IDT, Ed. 1

1

Systems and software engineering - Content of systems and software life cycle process information products (Documentation)

Page 218

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 15408-1:2007/ISO/IEC 15408-1:2005, IDT, Ed. 2 2

Information technology - Security techniques Evaluation criteria for IT security Part 1: Introduction and general model

SANS 15408-2:2007/ISO/IEC 15408-2:2005, IDT, Ed. 2 2

Information technology - Security techniques Evaluation criteria for IT security Part 2: Security functional requirements

SANS 15408-3:2009/ISO/IEC 15408-3:2008, IDT, Ed. 3 3

Information technology - Security techniques Evaluation criteria for IT security Part 3: Security assurance components

SANS 15414:2009/ISO/IEC 15414:2006, IDT, Ed. 2

1

Information technology - Open distributed processing - Reference model - Enterprise language

SANS 15415:2009/ISO/IEC 15415:2004, IDT, Ed. 1

1

Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Two- dimensional symbols

SANS 15416:2005/ISO/IEC 15416:2000, IDT, Ed. 1

1

Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols

SANS 15417:2008/ISO/IEC 15417:2007, IDT, Ed. 2

2

Information technology - Automatic identification and data capture techniques - Code 128 bar code symbology specification

SANS 15418:1999/ISO/IEC 15418:1999, IDT, Ed. 1 (SABS ISO/IEC 15418)

1

Information technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance

SANS 15420:2005/ISO/IEC 15420:2000, IDT, Ed. 1

1

Information technology - Automatic identification and data capture techniques - Bar code symbology specification - EAN/UPC

SANS 15421:2005/ISO/IEC 15421:2000, IDT, Ed. 1

1

Information technology - Automatic identification and data capture techniques - Bar code master test specifications

SANS 15423:2005/ISO/IEC 15423:2004, IDT, Ed. 1

1

Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing

SANS 15424:2009/ISO/IEC 15424:2008, IDT, Ed. 2

2

Information technology - Automatic identification and data capture techniques - Data Carrier Identifiers (including Symbology Identifiers)

SANS 15426-1:2005/ISO/IEC 15426-1:2000, IDT, Ed. 1 1

Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specifications Part 1: Linear symbols

SANS 15426-2:2008/ISO/IEC 15426-2:2005, IDT, Ed. 1 1

Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification Part 2: Two-dimensional symbols

SANS 15434:2008/ISO/IEC 15434:2006, IDT, Ed. 3

1

Information technology - Automatic identification and data capture techniques - Syntax for high-capacity ADC media

SANS 15438:2008/ISO/IEC 15438:2006, IDT, Ed. 2

1

Information technology - Automatic identification and data capture techniques - PDF417 bar code symbology specification

SANS 15442:2007/ISO 15442:2005, IDT, Ed. 1

1

Cranes - Safety requirements for loader cranes

SANS 15443-1:2006/ISO/IEC TR 15443-1:2005, IDT, 1 Ed. 1

Information technology - Security techniques - A framework for IT security assurance Part 1: Overview and framework

Page 219

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 15443-2:2006/ISO/IEC TR 15443-2:2005, IDT, 1 Ed. 1

Information technology - Security techniques - A framework for IT security assurance Part 2: Assurance methods

SANS 15443-3:2009/ISO/IEC TR 15443-3:2007, IDT, 1 Ed. 1

Information technology - Security techniques - A framework for IT security assurance Part 3: Analysis of assurance methods

SANS 15446:2009/ISO/IEC TR 15446:2009, IDT, Ed. 2 2

Information technology - Security techniques - Guide for the production of Protection Profiles and Security Targets

SANS 15457-1:2009/ISO/IEC 15457-1:2008, IDT, Ed. 2 2

Identification cards - Thin flexible cards Part 1: Physical characteristics

SANS 15457-2:2009/ISO/IEC 15457-2:2007, IDT, Ed. 2 2

Identification cards - Thin flexible cards Part 2: Magnetic recording technique

SANS 15457-3:2009/ISO/IEC 15457-3:2008, IDT, Ed. 2 2

Identification cards - Thin flexible cards Part 3: Test methods

SANS 15459-1:2008/ISO/IEC 15459-1:2006, IDT, Ed. 1 2

Information technology - Unique identifiers Part 1: Unique identifiers for transport units

SANS 15459-2:2008/ISO/IEC 15459-2:2006, IDT, Ed. 1 2

Information technology - Unique identifiers Part 2: Registration procedures

SANS 15459-3:2009/ISO/IEC 15459-3:2006, IDT, Ed. 1 1

Information technology - Unique identifiers Part 3: Common rules for unique identifiers

SANS 15459-4:2009/ISO/IEC 15459-4:2008, IDT, Ed. 1 2

Information technology - Unique identifiers Part 4: Individual items

SANS 15459-5:2009/ISO/IEC 15459-5:2007, IDT, Ed. 1 1

Information technology - Unique identifiers Part 5: Unique identifier for returnable transport items (RTIs)

SANS 15459-6:2009/ISO/IEC 15459-6:2007, IDT, Ed. 1 1

Information technology - Unique identifiers Part 6: Unique identifier for product groupings

SANS 15489-1:2004/ISO 15489-1:2001, IDT, Ed. 1

1

Information and documentation - Records management Part 1: General

SANS 15489-2:2004/ISO/TR 15489-2:2001, IDT, Ed. 1

1

Information and documentation - Records management Part 2: Guidelines

SANS 15494:2005/ISO 15494:2003, IDT, Ed. 1

1

Plastics piping systems for industrial applications Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series

SANS 15504-1:2005/ISO/IEC 15504-1:2004, IDT, Ed. 2 1 (SABS ISO/IEC TR 15504-1)

Information technology - Process assessment Part 1: Concepts and vocabulary

SANS 15504-2:2004/ISO/IEC 15504-2:2003, IDT, Ed. 2 1

Information technology - Process assessment Part 2: Performing an assessment

Page 220

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 15504-3:2004/ISO/IEC 15504-3:2004, IDT, Ed. 2 1

Information technology - Process assessment Part 3: Guidance on performing an assessment

SANS 15504-4:2004/ISO/IEC 15504-4:2004, IDT, Ed. 2 1

Information technology - Process assessment Part 4: Guidance on use for process improvement and process capability determination

SANS 15504-5:2008/ISO/IEC 15504-5:2006, IDT, Ed. 2 1

Information technology - Process assessment Part 5: An exemplar process assessment model

SANS 15511:2010/ISO 15511:2009, IDT, Ed. 2

2

Information and documentation - International standard identifier for libraries and related organizations (ISIL)

SANS 15513:2008/ISO 15513:2000, IDT, Ed. 1

1

Cranes - Competency requirements for crane drivers (operators), slingers, signallers and assessors

SANS 15528:2003/ISO 15528:2000, IDT, Ed. 1

1

Paints, varnishes and raw materials for paints and varnishes - Sampling

SANS 15584:2008/ISO 15584:2001, IDT, Ed. 1

1

Small craft - Inboard petrol engines - Enginemounted fuel and electrical components

SANS 15585:2007/ISO 15585:2006, IDT, Ed. 1

1

Hard coal - Determination of caking index

SANS 15587-1:2002/ISO 15587-1:2002, IDT, Ed. 1

1

Water quality - Digestion for the determination of selected elements in water Part 1: Aqua regia digestion

SANS 15587-2:2002/ISO 15587-2:2002, IDT, Ed. 1

1

Water quality - Digestion for the determination of selected elements in water Part 2: Nitric acid digestion

SANS 15589-1:2009/ISO 15589-1:2003, IDT, Ed. 1

1

Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems Part 1: On-land pipelines

SANS 15589-2:2009/ISO 15589-2:2004, IDT, Ed. 1

1

Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems Part 2: Offshore pipelines

SANS 15607:2007/ISO 15607:2003, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - General rules

SANS 15609-1:2007/ISO 15609-1:2004, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - Welding procedure specification Part 1: Arc welding

SANS 15609-2:2009/ISO 15609-2:2001, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - Welding procedure specification Part 2: Gas welding

SANS 15609-3:2009/ISO 15609-3:2004, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - Welding procedure specification Part 3: Electron beam welding

SANS 15609-5:2009/ISO 15609-5:2004, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - Welding procedure specification Part 5: Resistance welding

SANS 15614-1:2007/ISO 15614-1:2004, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys

Page 221

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 15614-2:2007/ISO 15614-2:2005, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 2: Arc welding of aluminium and its alloys

SANS 15614-3:2009/ISO 15614-3:2008, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 3: Fusion welding of non-alloyed and low-alloyed cast irons

SANS 15614-4:2008/ISO 15614-4:2005, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 4: Finishing welding of aluminium castings

SANS 15614-5:2008/ISO 15614-5:2004, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 5: Arc welding of titanium, zirconium and their alloys

SANS 15614-6:2008/ISO 15614-6:2006, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 6: Arc and gas welding of copper and its alloys

SANS 15614-7:2008/ISO 15614-7:2007, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 7: Overlay welding

SANS 15614-8:2008/ISO 15614-8:2002, IDT, Ed. 1

1

Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 8: Welding of tubes to tube-plate joints

SANS 15614-10:2008/ISO 15614-10:2005, IDT, Ed. 1 1

Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 10: Hyperbaric dry welding

SANS 15614-11:2008/ISO 15614-11:2002, IDT, Ed. 1 1

Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 11: Electron and laser beam welding

SANS 15614-12:2008/ISO 15614-12:2004, IDT, Ed. 1 1

Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 12: Spot, seam and projection welding

SANS 15614-13:2008/ISO 15614-13:2005, IDT, Ed. 1 1

Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 13: Resistance butt and flash welding

SANS 15628:2009/ISO 15628:2007, IDT, Ed. 1

1

Road transport and traffic telematics - Dedicated short range communication (DSRC) - DSRC application layer

SANS 15648:2005/ISO 15648:2004, IDT, Ed. 1

1

Butter - Determination of salt content Potentiometric method

SANS 15652:2008/ISO 15652:2003, IDT, Ed. 1

1

Small craft - Remote steering systems for inboard mini jet boats

SANS 15654:2006/ISO 15654:2004, IDT, Ed. 1

1

Fatigue test method for transmission precision roller chains

SANS 15682:2002/ISO 15682:2000, IDT, Ed. 1

1

Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection

SANS 15693-1:2004/ISO/IEC 15693-1:2000, IDT, Ed. 1 1

Identification cards - Contactless integrated circuit(s) cards - Vicinity cards Part 1: Physical characteristics

SANS 15693-2:2009/ISO/IEC 15693-2:2006, IDT, Ed. 2 2

Identification cards - Contactless integrated circuit cards - Vicinity cards Part 2: Air interface and initialization

Page 222

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 15693-3:2004/ISO/IEC 15693-3:2001, IDT, Ed. 1 1

Identification cards - Contactless integrated circuit(s) cards - Vicinity cards Part 3: Anticollision and transmission protocol

SANS 15696:2008/ISO/TS 15696:2000, IDT, Ed. 1

1

Cranes - List of equivalent terms

SANS 15706:2005/ISO 15706:2002, IDT, Ed. 1

1

Information and documentation - International Standard Audiovisual Number (ISAN)

SANS 15707:2005/ISO 15707:2001, IDT, Ed. 1

1

Information and documentation - International Standard Musical Work Code (ISWC)

SANS 15708-1:2005/ISO 15708-1:2002, IDT, Ed. 1

1

Non-destructive testing - Radiation methods Computed tomography Part 1: Principles

SANS 15708-2:2005/ISO 15708-2:2002, IDT, Ed. 1

1

Non-destructive testing - Radiation methods Computed tomography Part 2: Examination practices

SANS 15794:2007/ISO 15794:2001, IDT, Ed. 1

1

Bi-directional and multi-directional fork-lift trucks Stability tests

SANS 15801:2005/ISO/TR 15801:2004, IDT, Ed. 1

1

Electronic imaging - Information stored electronically - Recommendations for trustworthiness and reliability

SANS 15816:2006/ISO/IEC 15816:2002, IDT, Ed. 1

1

Information technology - Security techniques Security information objects for access control

SANS 15836:2009/ISO 15836:2009, IDT, Ed. 2

1

Information and documentation - The Dublin Core metadata element set

SANS 15854:2008/ISO 15854:2005, IDT, Ed. 1

1

Dentistry - Casting and baseplate waxes

SANS 15870:2007/ISO 15870:2000, IDT, Ed. 1

1

Powered industrial trucks - Safety signs and hazard pictorials - General principles

SANS 15874-1:2004/ISO 15874-1:2003, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 1: General

SANS 15874-2:2004/ISO 15874-2:2003, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 2: Pipes

SANS 15874-3:2004/ISO 15874-3:2003, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 3: Fittings

SANS 15874-5:2004/ISO 15874-5:2003, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 5: Fitness for purpose of the system

SANS 15875-1:2004/ISO 15875-1:2003, IDT, Ed. 1

2

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) Part 1: General

SANS 15875-2:2004/ISO 15875-2:2003, IDT, Ed. 1

2

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) Part 2: Pipes

SANS 15875-3:2004/ISO 15875-3:2003, IDT, Ed. 1

2

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) Part 3: Fittings

SANS 15875-5:2004/ISO 15875-5:2003, IDT, Ed. 1

2

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) Part 5: Fitness for purpose of the system

Page 223

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 15876-1:2005/ISO 15876-1:2003, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Polybutylene (PB) Part 1: General

SANS 15876-2:2005/ISO 15876-2:2003, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Polybutylene (PB) Part 2: Pipes

SANS 15876-3:2005/ISO 15876-3:2003, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Polybutylene (PB) Part 3: Fittings

SANS 15876-5:2005/ISO 15876-5:2003, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Polybutylene (PB) Part 5: Fitness for purpose of the system

SANS 15877-1:2005/ISO 15877-1:2003, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride)(PVCC) Part 1: General

SANS 15877-2:2005/ISO 15877-2:2003, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride)(PVCC) Part 2: Pipes

SANS 15877-3:2005/ISO 15877-3:2003, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride)(PVCC) Part 3: Fittings

SANS 15877-5:2005/ISO 15877-5:2003, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride)(PVCC) Part 5: Fitness for purpose of the system

SANS 15883-1:2008/ISO 15883-1:2006, IDT, Ed. 1

1

Washer-disinfectors Part 1: General requirements, terms and definitions and tests

SANS 15883-2:2008/ISO 15883-2:2006, IDT, Ed. 1

1

Washer-disinfectors Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc

SANS 15883-4:2008/ISO 15883-4:2008, IDT, Ed. 1

1

Washer-disinfectors Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes

SANS 15910:2003/ISO/IEC 15910:1999, IDT, Ed. 1

1

Information technology - Software user documentation process

SANS 15924:2005/ISO 15924:2004, IDT, Ed. 1

1

Information and documentation - Codes for the representation of names of scripts

SANS 15939:2009/ISO/IEC 15939:2007, IDT, Ed. 2

2

Systems and software engineering - Measurement process

SANS 15940:2009/ISO/IEC 15940:2006, IDT, Ed. 1

1

Information Technology - Software engineering environment services

SANS 15945:2002/ISO/IEC 15945:2002, IDT, Ed. 1

1

Information technology - Security techniques Specification of TTP services to support the application of digital signatures

SANS 15946-1:2009/ISO/IEC 15946-1:2008, IDT, Ed. 2

2

Information technology - Security techniques Cryptographic techniques based on elliptic curves Part 1: General

SANS 15946-2:2007/ISO/IEC 15946-2:2002, IDT, Ed. 1

1

Information technology - Security techniques Cryptographic techniques based on elliptic curves Part 2: Digital signatures

Page 224

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 15946-3:2007/ISO/IEC 15946-3:2002, IDT, Ed. 1

1

Information technology - Security techniques Cryptographic techniques based on elliptic curves Part 3: Key establishment

SANS 15946-4:2007/ISO/IEC 15946-4:2004, IDT, Ed. 1

1

Information technology - Security techniques Cryptographic techniques based on elliptic curves Part 4: Digital signatures giving message recovery

SANS 15947:2003/ISO/IEC TR 15947:2002, IDT, Ed. 1 1

Information technology - Security techniques - IT intrusion detection framework

SANS 15963:2008/ISO/IEC 15963:2004, IDT, Ed. 1

1

Information technology - Radio frequency identification for item management - Unique identification for RF tags

SANS 16001:2007/AMS 16001:2003, MOD

1

HIV and AIDS management systems - General requirements

SANS 16022:2008/ISO/IEC 16022:2006, IDT, Ed. 2

1

Information technology - Automatic identification and data capture techniques - Data Matrix bar code symbology specification

SANS 16037:2003/ISO 16037:2002, IDT, Ed. 1

1

Rubber condoms for clinical trials - Measurement of physical properties

SANS 16038:2006/ISO 16038:2005, IDT, Ed. 1

1

Rubber condoms - Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms

SANS 16063-1:2008/ISO 16063-1:1998, IDT, Ed. 1

1

Methods for the calibration of vibration and shock transducers Part 1: Basic concepts

SANS 16063-11:2008/ISO 16063-11:1999, IDT, Ed. 1 1

Methods for the calibration of vibration and shock transducers Part 11: Primary vibration calibration by laser interferometry

SANS 16063-13:2008/ISO 16063-13:2001, IDT, Ed. 1 1

Methods for the calibration of vibration and shock transducers Part 13: Primary shock calibration using laser interferometry

SANS 16063-21:2008/ISO 16063-21:2003, IDT, Ed. 1 1

Methods for the calibration of vibration and shock transducers Part 21: Vibration calibration by comparison to a reference transducer

SANS 16063-22:2008/ISO 16063-22:2005, IDT, Ed. 1 1

Methods for the calibration of vibration and shock transducers Part 22: Shock calibration by comparison to a reference transducer

SANS 16063-31:2009/ISO 16063-31:2009, IDT, Ed. 1 1

Methods for the calibration of vibration and shock transducers Part 31: Testing of transverse vibration sensitivity

SANS 16085:2007/ISO/IEC 16085:2006, IDT, Ed. 2

1

Systems and software engineering - Life cycle processes - Risk management

SANS 16132:2010/ISO 16132:2004, IDT, Ed. 1

1

Ductile iron pipes and fittings - Seal coats for cement mortar linings

SANS 16133:2003/ISO 6133:1998, IDT, Ed. 2

1

Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength

SANS 16135:2009/ISO 16135:2006, IDT, Ed. 1

1

Industrial valves - Ball valves of thermoplastics materials

SANS 16147:2008/ISO 16147:2002, IDT, Ed. 1

1

Small craft - Inboard diesel engines - Enginemounted fuel and electrical components

Page 225

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 16201:2009/ISO 16201:2006, IDT, Ed. 1

1

Technical aids for persons with disability Environmental control systems for daily living

SANS 16269-6:2006/ISO 16269-6:2005, IDT, Ed. 1

1

Statistical interpretation of data Part 6: Determination of statistical tolerance intervals

SANS 16269-7:2010/ISO 16269-7:2001, IDT, Ed. 1

1

Statistical interpretation of data Part 7: Median Estimation and confidence intervals

SANS 16269-8:2010/ISO 16269-8:2004, IDT, Ed. 1

1

Statistical interpretation of data Part 8: Determination of prediction intervals

SANS 16326:2003/ISO/IEC TR 16326:1999, IDT, Ed. 1 1

Software engineering - Guide for the application of ISO/IEC 12207 to project management

SANS 16368:2007/ISO 16368:2003, IDT, Ed. 1

1

Mobile elevating work platforms - Design calculations, safety requirements and test methods

SANS 16388:2008/ISO/IEC 16388:2007, IDT, Ed. 2

1

Information technology - Automatic identification and data capture techniques - Code 39 bar code symbology specification

SANS 16390:2008/ISO/IEC 16390:2007, IDT, Ed. 2

2

Information technology - Automatic identification and data capture techniques - Interleaved 2 of 5 bar code symbology specification

SANS 16422:2007/ISO 16422:2006, IDT, Ed. 1

1

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications

SANS 16590:2000/ISO 16590:2000, IDT, Ed. 1

1

Water quality - Determination of mercury - Methods involving enrichment by amalgamation

SANS 16642:2006/ISO 16642:2003, IDT, Ed. 1

1

Computer applications in terminology Terminological markup framework

SANS 16649-3:2008/ISO/TS 16649-3:2005, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of betaglucuronidase-positive Escherichia coli Part 3: Most probable number technique using 5-bromo-4-chloro3-indolyl-beta-D-glucuronide

SANS 16654:2003/ISO 16654:2001, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Horizontal method for the detection of Escherichia coli O157

SANS 16714:2009/ISO 16714:2008, IDT, Ed. 1

1

Earth-moving machinery - Recyclability and recoverability - Terminology and calculation method

SANS 16818:2010/ISO 16818:2008, IDT, Ed. 1

1

Building environment design - Energy efficiency Terminology

SANS 16949:2009/ISO/TS 16949:2009, IDT, Ed. 3

3

Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations

SANS 17000:2005/ISO/IEC 17000:2004, IDT, Ed. 1

1

Conformity assessment - Vocabulary and general principles

SANS 17007:2009/ISO 17007:2009, IDT, Ed. 1

1

Conformity assessment - Guidance for drafting normative documents suitable for use for conformity assessment

SANS 17020:1998/ISO/IEC 17020:1998, IDT, Ed. 1 (SABS ISO/IEC 17020)

1

General criteria for the operation of various types of bodies performing inspection

(SABS ISO/IEC 16390)

(SABS ISO 16590)

(SABS ISO/TS 16949)

Page 226

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 17021:2006/ISO/IEC 17021:2006, IDT, Ed. 1

1

Conformity assessment - Requirements for bodies providing audit and certification of management systems

SANS 17024:2005/ISO/IEC 17024:2003, IDT, Ed. 1

1

Conformity assessment - General requirements for bodies operating certification of persons

SANS 17025:2005/ISO/IEC 17025:2005, IDT, Ed. 2 (SABS ISO/IEC 17025)

2

General requirements for the competence of testing and calibration laboratories

SANS 17040:2005/ISO/IEC 17040:2005, IDT, Ed. 1

1

Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies

SANS 17043:2010/ISO/IEC 17043:2010, IDT, Ed. 1

1

Conformity assessment - General requirements for proficiency testing

SANS 17090-1:2009/ISO 17090-1:2008, IDT, Ed. 1

2

Health informatics - Public key infrastructure Part 1: Overview of digital certificate services

SANS 17090-2:2009/ISO 17090-2:2008, IDT, Ed. 1

2

Health informatics - Public key infrastructure Part 2: Certificate profile

SANS 17090-3:2009/ISO 17090-3:2008, IDT, Ed. 1

2

Health informatics - Public key infrastructure Part 3: Policy management of certification authority

SANS 17117:2003/ISO/TS 17117:2002, IDT, Ed. 1

1

Health Informatics - Controlled health terminology Structure and high-level indicators

SANS 17229:2009/ISO 17229:2002, IDT, Ed. 1

1

Leather - Physical and mechanical tests Determination of water vapour absorption

SANS 17235:2009/ISO 17235:2002, IDT, Ed. 1

1

Leather - Physical and mechanical tests Determination of softness

SANS 17246:2006/ISO 17246:2005, IDT, Ed. 1

1

Coal - Proximate analysis

SANS 17247:2006/ISO 17247:2005, IDT, Ed. 1

1

Coal - Ultimate analysis

SANS 17381:2008/ISO 17381:2003, IDT, Ed. 1

1

Water quality - Selection and application of ready-touse test kit methods in water analysis

SANS 17484-1:2010/ISO 17484-1:2006, IDT, Ed. 1

1

Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Part 1: Specifications for sytems

SANS 17495:2002/ISO 17495:2001, IDT, Ed. 1

1

Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection

SANS 17577:2010/ISO 17577:2006, IDT, Ed. 1

1

Steel - Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm

SANS 17604:2009/ISO 17604:2003, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Carcass sampling for microbiological analysis

SANS 17660-1:2009/ISO 17660-1:2006, IDT, Ed. 1

1

Welding - Welding of reinforcing steel Part 1: Loadbearing welded joints

SANS 17660-2:2009/ISO 17660-2:2006, IDT, Ed. 1

1

Welding - Welding of reinforcing steel Part 2: Nonload-bearing welded joints

Page 227

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 17664:2007/ISO 17664:2004, IDT, Ed. 1

1

Sterilization of medical devices - Information to be provided by the manufacturer for the processing of resterilizable medical devices

SANS 17665-1:2007/ISO 17665-1:2006, IDT, Ed. 1

1

Sterilization of health care products - Moist heat Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices

SANS 18000-1:2009/ISO/IEC 18000-1:2008, IDT, Ed. 2 2

Information technology - Radio frequency identification for item management Part 1: Reference architecture and definition of parameters to be standardized

SANS 18000-2:2006/ISO/IEC 18000-2:2004, IDT, Ed. 1 1

Information technology - Radio frequency identification for item management Part 2: Parameters for air interface communications below 135 kHz

SANS 18000-3:2009/ISO/IEC 18000-3:2008, IDT, Ed. 2 2

Information technology - Radio frequency identification for item management Part 3: Parameters for air interface communications at 13,56 MHz

SANS 18000-4:2009/ISO/IEC 18000-4:2008, IDT, Ed. 2 2

Information technology - Radio frequency identification for item management Part 4: Parameters for air interface communications at 2,45 GHz

SANS 18000-6:2006/ISO/IEC 18000-6:2004, IDT, Ed. 1 1

Information technology - Radio frequency identification for item management Part 6: Parameters for air interface communications at 860 MHz to 960 MHz

SANS 18000-7:2008/ISO/IEC 18000-7:2008, IDT, Ed. 1 2

Information technology - Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz

SANS 18001:2008/ISO/IEC TR 18001:2004, IDT, Ed. 1 1

Information technology - Radio frequency identification for item management - Application requirements profiles

SANS 18004:2008/ISO/IEC 18004:2006, IDT, Ed. 2

1

Information technology - Automatic identification and data capture techniques - QR Code 2005 bar code symbology specification

SANS 18013-1:2007/ISO/IEC 18013-1:2005, IDT, Ed. 1 1

Information technology - Personal identification ISO-compliant driving licence Part 1: Physical characteristics and basic data set

SANS 18013-2:2008/ISO/IEC 18013-2:2008, IDT, Ed. 1 1

Information technology - Personal identification ISO-compliant driving licence Part 2: Machinereadable technologies

SANS 18013-3:2009/ISO/IEC 18013-3:2009, IDT, Ed. 1 1

Information technology - Personal identification ISO-compliant driving licence Part 3: Access control, authentication and integrity validation

SANS 18014-1:2009/ISO/IEC 18014-1:2008, IDT, Ed. 2 2

Information technology - Security techniques - Time stamping services Part 1: Framework

SANS 18014-2:2004/ISO/IEC 18014-2:2002, IDT, Ed. 1 1

Information technology - Security techniques - Time stamping services Part 2: Mechanisms producing independent tokens

SANS 18014-3:2004/ISO/IEC 18014-3:2004, IDT, Ed. 1 1

Information technology - Security techniques - Timestamping services Part 3: Mechanisms producing linked tokens

Page 228

Standards available in electronic format (PDF) May

SANS Number SANS 18019:2004/ISO/IEC 18019:2004, IDT, Ed. 1

2010

Edition Title 1

Software and system engineering - Guidelines for the design and preparation of user documentation for application software

SANS 18028-1:2009/ISO/IEC 18028-1:2006, IDT, Ed. 1 1

Information technology - Security techniques - IT network security Part 1: Network security management

SANS 18028-3:2009/ISO/IEC 18028-3:2005, IDT, Ed. 1 1

Information technology - Security techniques - IT network security Part 3: Securing communications between networks using security gateways

SANS 18028-4:2009/ISO/IEC 18028-4:2005, IDT, Ed. 1 1

Information technology - Security techniques - IT network security Part 4: Securing remote access

SANS 18028-5:2009/ISO/IEC 18028-5:2006, IDT, Ed. 1 1

Information technology - Security techniques - IT network security Part 5: Securing communications across networks using virtual private networks

SANS 18031:2007/ISO/IEC 18031:2005, IDT, Ed. 1

1

Information technology - Security techniques Random bit generation

SANS 18032:2007/ISO/IEC 18032:2005, IDT, Ed. 1

1

Information technology - Security techniques - Prime number generation

SANS 18033-1:2007/ISO/IEC 18033-1:2005, IDT, Ed. 1

1

Information technology - Security techniques Encryption algorithms Part 1: General

SANS 18033-2:2007/ISO/IEC 18033-2:2006, IDT, Ed. 1

1

Information technology - Security techniques Encryption algorithms Part 2: Asymmetric ciphers

SANS 18033-3:2007/ISO/IEC 18033-3:2005, IDT, Ed. 1

1

Information technology - Security techniques Encryption algorithms Part 3: Block ciphers

SANS 18033-4:2007/ISO/IEC 18033-4:2005, IDT, Ed. 1

1

Information technology - Security techniques Encryption algorithms Part 4: Stream ciphers

SANS 18043:2009/ISO/IEC 18043:2006, IDT, Ed. 1

1

Information technology - Security techniques Selection, deployment and operations of intrusion detection systems

SANS 18044:2008/ISO/IEC TR 18044:2004, IDT, Ed. 1 1

Information technology - Security techniques Information security incident management

1

Information technology - Security techniques Methodology for IT security evaluation

SANS 18045:2007/ISO/IEC 18045:2005, IDT, Ed. 1

SANS 18046-3:2008/ISO/IEC 18046-3:2007, IDT, Ed. 1 1

Information technology - Radio frequency identification device performance test methods Part 3: Test methods for tag performance

SANS 18047-2:2008/ISO/IEC TR 18047-2:2006, IDT, 1 Ed. 1

Information technology - Radio frequency identification device conformance test methods Part 2: Test methods for air interface communications below 135 kHz

SANS 18047-3:2006/ISO/IEC TR 18047-3:2004, IDT, 1 Ed. 1

Information technology - Radio frequency identification device conformance test methods Part 3: Test methods for air interface communications at 13,56 MHz

Page 229

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 18047-4:2006/ISO/IEC TR 18047-4:2004, IDT, 1 Ed. 1

Information technology - Radio frequency identification device conformance test methods Part 4: Test methods for air interface communications at 2,45 GHz

SANS 18173:2010/ISO/TS 18173:2005, IDT, Ed. 1

1

Non-destructive testing - General terms and definitions

SANS 18225:2009/ISO 18225:2007, IDT, Ed. 1

1

Plastics piping systems - Multilayer piping systems for outdoor gas installations - Specifications for systems

SANS 18234-1:2007/ISO/TS 18234-1:2006, IDT, Ed. 1

1

Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) datastreams Part 1: Introduction, numbering and versions

SANS 18234-2:2007/ISO/TS 18234-2:2006, IDT, Ed. 1

1

Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) datastreams Part 2: Syntax, Semantics and Framing Structure (SSF)

SANS 18234-3:2007/ISO/TS 18234-3:2006, IDT, Ed. 1

1

Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) datastreams Part 3: Service and Network Information (SNI) application

SANS 18234-4:2007/ISO/TS 18234-4:2006, IDT, Ed. 1

1

Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) datastreams Part 4: Road Traffic Message (RTM) application

SANS 18234-6:2007/ISO/TS 18234-6:2006, IDT, Ed. 1

1

Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) datastreams Part 6: Location referencing applications

SANS 18283:2007/ISO 18283:2006, IDT, Ed. 1

1

Hard coal and coke - Manual sampling

SANS 18308:2007/ISO/TS 18308:2004, IDT, Ed. 1

1

Health informatics - Requirements for an electronic health record architecture

SANS 18415:2009/ISO 18415:2007, IDT, Ed. 1

1

Cosmetics - Microbiology - Detection of specified and non-specified microorganisms

SANS 18593:2004/ISO 18593:2004, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Horizontal methods for sampling techniques from surfaces using contact plates and swabs

SANS 18752:2009/ISO 18752:2006, IDT, Ed. 1

1

Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification

SANS 18812:2003/ISO 18812:2003, IDT, Ed. 1

1

Health informatics - Clinical analyser interfaces to laboratory information systems - Use profiles

SANS 18878:2007/ISO 18878:2004, IDT, Ed. 1

1

Mobile elevating work platforms - Operator (driver) training

SANS 18893:2007/ISO 18893:2004, IDT, Ed. 1

1

Mobile elevating work platforms - Safety principles, inspection, maintenance and operation

SANS 19005-1:2006/ISO 19005-1:2005, IDT, Ed. 1

1

Document management - Electronic document file format for long-term preservation Part 1: Use of PDF 1.4 (PDF/A-1)

SANS 19011:2003/ISO 19011:2002, IDT, Ed. 1

1

Guidelines for quality and/or environmental management systems auditing

Page 230

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 19092:2009/ISO 19092:2008, IDT, Ed. 1

1

Financial services - Biometrics - Security framework

SANS 19101:2003/ISO 19101:2002, IDT, Ed. 1

1

Geographic information - Reference model

SANS 19101-2:2009/ISO/TS 19101-2:2008, IDT, Ed. 1

1

Geographic information - Reference model Part 2: Imagery

SANS 19103:2006/ISO/TS 19103:2005, IDT, Ed. 1

1

Geographic information - Conceptual schema language

SANS 19105:2003/ISO 19105:2000, IDT, Ed. 1

1

Geographic information - Conformance and testing

SANS 19106:2004/ISO 19106:2004, IDT, Ed. 1

1

Geographic information - Profiles

SANS 19107:2003/ISO 19107:2003, IDT, Ed. 1

1

Geographic information - Spatial schema

SANS 19108:2003/ISO 19108:2002, IDT, Ed. 1

1

Geographic information - Temporal schema

SANS 19109:2006/ISO 19109:2005, IDT, Ed. 1

1

Geographic information - Rules for application schema

SANS 19110:2005/ISO 19110:2005, IDT, Ed. 1

1

Geographic information - Methodology for feature cataloguing

SANS 19111:2009/ISO 19111:2007, IDT, Ed. 2

2

Geographic information - Spatial referencing by coordinates

SANS 19112:2004/ISO 19112:2003, IDT, Ed. 1

1

Geographic information - Spatial referencing by geographic identifiers

SANS 19113:2003/ISO 19113:2002, IDT, Ed. 1

1

Geographic information - Quality principles

SANS 19114:2004/ISO 19114:2003, IDT, Ed. 1

1

Geographic information - Quality evaluation procedures

SANS 19115:2003/ISO 19115:2003, IDT, Ed. 1

1

Geographic information - Metadata

SANS 19116:2004/ISO 19116:2004, IDT, Ed. 1

1

Geographic information - Positioning services

SANS 19117:2006/ISO 19117:2005, IDT, Ed. 1

1

Geographic information - Portrayal

SANS 19118:2006/ISO 19118:2005, IDT, Ed. 1

1

Geographic information - Encoding

SANS 19119:2005/ISO 19119:2005, IDT, Ed. 1

1

Geographic information - Services

SANS 19120:2003/ISO/TR 19120:2001, IDT, Ed. 1

1

Geographic information - Functional standards

Page 231

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 19121:2000/ISO/TR 19121:2000, IDT, Ed. 1 (SABS ISO/TR 19121)

1

Geographic information - Imagery and gridded data

SANS 19122:2005/ISO/TR 19122:2004, IDT, Ed. 1

1

Geographic information/Geomatics - Qualification and certification of personnel

SANS 19123:2006/ISO 19123:2005, IDT, Ed. 1

1

Geographic information - Schema for coverage geometry and functions

SANS 19125-1:2005/ISO 19125-1:2004, IDT, Ed. 1

1

Geographic information - Simple feature access Part 1: Common architecture

SANS 19125-2:2005/ISO 19125-2:2004, IDT, Ed. 1

1

Geographic information - Simple feature access Part 2: SQL option

SANS 19127:2006/ISO/TS 19127:2005, IDT, Ed. 1

1

Geographic information - Geodetic codes and parameters

SANS 19133:2006/ISO 19133:2005, IDT, Ed. 1

1

Geographic information - Location-based services Tracking and navigation

SANS 19135:2006/ISO 19135:2005, IDT, Ed. 1

1

Geographic information - Procedures for item registration

SANS 19138:2009/ISO/TS 19138:2006, IDT, Ed. 1

1

Geographic information - Data quality measures

SANS 19139:2009/ISO/TS 19139:2007, IDT, Ed. 1

1

Geographic information - Metadata - XML schema implementation

SANS 19141:2009/ISO/IEC 19141:2008, IDT, Ed. 1

1

Geographic information - Schema for moving features

SANS 19579:2007/ISO 19579:2006, IDT, Ed. 1

1

Solid mineral fuels - Determination of sulfur by IR spectrometry

SANS 19752:2007/ISO/IEC 19752:2004, IDT, Ed. 1

1

Information technology - Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components

SANS 19757-2:2010/ISO/IEC 19757-2:2008, IDT, Ed. 1 2

Information technology - Document Schema Definition Language (DSDL) Part 2: Regulargrammar-based validation - RELAX NG

SANS 19757-3:2010/ISO/IEC 19757-3:2006, IDT, Ed. 1 1

Information technology - Document Schema Definition Languages (DSDL) Part 3: Rule-based validation - Schematron

SANS 19757-4:2010/ISO/IEC 19757-4:2006, IDT, Ed. 1 1

Information technology - Document Schema Definition Languages (DSDL) Part 4: Namespacebased Validation Dispatching Language (NVDL)

SANS 19759:2007/ISO/IEC TR 19759:2005, IDT, Ed. 1 1

Software Engineering - Guide to the Software Engineering Body of Knowledge (SWEBOK)

SANS 19760:2004/ISO/IEC TR 19760:2003, IDT, Ed. 1 1

Systems engineering - A guide for the application of ISO/IEC 15288 (System life cycle processes)

SANS 19761:2003/ISO/IEC 19761:2003, IDT, Ed. 1

Software engineering - COSMIC-FFP - A functional size measurement method

1

Page 232

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 19762-1:2009/ISO/IEC 19762-1:2008, IDT, Ed. 1 2

Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary Part 1: General terms relating to AIDC

SANS 19762-2:2009/ISO/IEC 19762-2:2008, IDT, Ed. 1 2

Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary Part 2: Optically readable media (ORM)

SANS 19762-3:2009/ISO/IEC 19762-3:2008, IDT, Ed. 1 2

Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary Part 3: Radio frequency identification (RFID)

SANS 19762-4:2009/ISO/IEC 19762-4:2008, IDT, Ed. 1 1

Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary Part 4: General terms relating to radio communications

SANS 19762-5:2009/ISO/IEC 19762-5:2008, IDT, Ed. 1 1

Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary Part 5: Locating systems

SANS 19765:2009/ISO/IEC TR 19765:2007, IDT, Ed. 1 1

Information technology - Survey of icons and symbols that provide access to functions and facilities to improve the use of information technology products by the elderly and persons with disabilities

SANS 19772:2009/ISO/IEC 19772:2009, IDT, Ed. 1

1

Information technology - Security techniques Authenticated encryption

SANS 19782:2008/ISO/IEC TR 19782:2006, IDT, Ed. 1 1

Information technology - Automatic identification and data capture techniques - Effects of gloss and low substrate opacity on reading of bar code symbols

SANS 19784-1:2007/ISO/IEC 19784-1:2006, IDT, Ed. 1 1

Information technology - Biometric application programming interface Part 1: BioAPI specification

SANS 19785-1:2007/ISO/IEC 19785-1:2006, IDT, Ed. 1 1

Information technology - Common Biometric Exchange Formats Framework Part 1: Data element specification

SANS 19785-3:2008/ISO/IEC 19785-3:2007, IDT, Ed. 1 1

Information Technology - Common biometric exchange formats framework Part 3: Patron format specifications

SANS 19790:2009/ISO/IEC 19790:2006, IDT, Ed. 1

Information technology - Security techniques Security requirements for cryptographic modules

1

SANS 19791:2007/ISO/IEC TR 19791:2006, IDT, Ed. 1 1

Information technology - Security techniques Security assessment of operational systems

SANS 19794-1:2007/ISO/IEC 19794-1:2006, IDT, Ed. 1 1

Information technology - Biometric data interchange formats Part 1: Framework

SANS 19794-2:2007/ISO/IEC 19794-2:2005, IDT, Ed. 1 1

Information technology - Biometric data interchange formats Part 2: Finger minutiae data

SANS 19794-4:2007/ISO/IEC 19794-4:2005, IDT, Ed. 1 1

Information technology - Biometric data interchange formats Part 4: Finger image data

Page 233

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 19794-5:2007/ISO/IEC 19794-5:2005, IDT, Ed. 1 1

Information technology - Biometric data interchange formats Part 5: Face image data

SANS 19794-6:2007/ISO/IEC 19794-6:2005, IDT, Ed. 1 1

Information technology - Biometric data interchange formats Part 6: Iris image data

SANS 19795-1:2007/ISO/IEC 19795-1:2006, IDT, Ed. 1 1

Information technology - Biometric performance testing and reporting Part 1: Principles and framework

SANS 19795-2:2007/ISO/IEC 19795-2:2007, IDT, Ed. 1 1

Information technology - Biometric performance testing and reporting Part 2: Testing methodologies for technology and scenario evaluation

SANS 19795-3:2009/ISO/IEC TR 19795-3:2007, IDT, 1 Ed. 1

Information technology - Biometric performance testing and reporting Part 3: Modality - Specific testing

SANS 19795-4:2009/ISO/IEC 19795-4:2008, IDT, Ed. 1 1

Information technology - Biometric performance testing and reporting Part 4: Interoperability performance testing

SANS 19796-1:2006/ISO/IEC 19796-1:2005, IDT, Ed. 1 1

Information technology - Learning, education and training - Quality management, assurance and metrics Part 1: General approach

SANS 19798:2007/ISO/IEC 19798:2006, IDT, Ed. 1

1

Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components

SANS 19961:2007/ISO/TR 19961:2005, IDT, Ed. 1

1

Cranes - Safety code on mobile cranes

SANS 20000-1:2006/ISO/IEC 20000-1:2005, IDT, Ed. 1 1

Information technology - Service management Part 1: Specification

SANS 20000-2:2006/ISO/IEC 20000-2:2005, IDT, Ed. 1 1

Information technology - Service management Part 2: Code of practice

SANS 20001:1992/ECE R1:1992, IDT, Ed. 5 (SABS ECE R 1)

1

Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam and/or a driving beam and equipped with filament lamps of categories R2 and/or HS1

SANS 20003:2005/ECE R3:2005, IDT, Ed. 4 (SABS ECE R 3)

2

Uniform provisions concerning the approval of retroreflective devices for power-driven vehicles and their trailers

SANS 20004:1997/ECE R4:1997, IDT, Ed. 2

1

Uniform provisions concerning the approval of devices for the illumination of rear registration plates of motor vehicles (except motor cycles) and their trailers

SANS 20005:1992/ECE R5:1992, IDT, Ed. 4 (SABS ECE R 5)

1

Uniform provisions concerning the approval of power-driven vehicle's sealed-beam headlamps (SB) emitting a European asymmetrical passing beam or a driving beam or both

SANS 20006:2003/ECE R6:2001, IDT, Ed. 4 (SABS ECE R 6)

2

Uniform provisions concerning the approval of direction indicators for motor vehicles and their trailers

SANS 20007:2007/ECE R7:2006, IDT, Ed. Rev 4

3

Uniform provisions concerning the approval of front and rear position (side) lamps, stop-lamps and endoutline marker lamps for power-driven vehicles and their trailers

(SABS ECE R 4)

(SABS ECE R 7)

Page 234

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 20008:2004/ECE R8:2002, IDT, Ed. 5 (SABS ECE R 8)

2

Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1, HIR2 and/or H11)

SANS 20009:2007/ECE R9:1997, IDT, Ed. Rev 2

1

Uniform provisions concerning the approval of category L2, L4 and L5 vehicles with regard to noise

SANS 20010:2007/ECE R10:1997, IDT, Ed. Rev 2

1

Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility

SANS 20011:1981/ECE R11:1981, IDT, Ed. Rev 1 (SABS ECE R 11)

1

Uniform provisions concerning the approval of vehicles with regard to door latches and door retention components

SANS 20012:1994/ECE R12:1994, IDT, Ed. 3

1

Uniform provisions concerning the approval of vehicles with regard to the protection of the driver against the steering mechanism in the event of impact

3

(SABS ECE R 13)

Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking

SANS 20013-H:2009/ECE R13-H:2008, IDT, Ed. Rev 2 1

Uniform provisions concerning the approval of passenger cars with regard to braking

SANS 20014:2006/ECE R14:2006, IDT, Ed. Rev 4

2

Uniform provisions concerning the approval of vehicles with regard to safety-belt anchorages, isofix anchorages systems and isofix top tether anchorages

3

Uniform provisions concerning the approval of I. Safety-belts, restraint systems, child restraint systems and isofix child restraint systems for occupants of power-driven vehicles II. Vehicles equipped with safety-belts, safety-belt reminder, restraint systems, child restraint systems and isofix child restraint systems

SANS 20017:2004/ECE R17:2002, IDT, Ed. Rev 4

2

Uniform provisions concerning the approval of vehicles with regard to the seats, their anchorages and any head restraints

SANS 20019:2008/ECE R19:2006, IDT, Ed. Rev 4 (SABS ECE R 19)

2

Uniform provisions concerning the approval of power-driven vehicle front fog lamps

SANS 20020:2008/ECE R20:2006, IDT, Ed. Rev 3

2

Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps (H4 lamps)

SANS 20021:1993/ECE R21:1993, IDT (SABS ECE R 21)

1

Uniform provisions concerning the approval of vehicles with regard to their interior fittings

SANS 20022:2005/ECE R22:2002, IDT, Ed. 5

2

Uniform provisions concerning the approval of protective helmets and of their visors for drivers and passengers of motor cycles and mopeds

SANS 20023:2007/ECE R23:2003, IDT, Ed. Rev 2 (SABS ECE R 23)

2

Uniform provisions concerning the approval of reversing lamps for power-driven vehicles and their trailers

SANS 20027:1998/ECE R27:1998, IDT, Ed. 2

1

Uniform provisions for the approval of advancewarning triangles

(SABS ECE R 12)

SANS 20013:2009/ECE R13:2008, IDT, Ed. 6

(SABS ECE R 14)

SANS 20016:2009/ECE R16:2009, IDT, Ed. Rev 6 (SABS ECE R 16)

(SABS ECE R 20)

(SABS ECE R 22)

(SABS ECE R 27)

Page 235

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 20028:1972/ECE R28:1972, IDT, Ed. 1 (SABS ECE R 28)

1

Uniform provisions for the approval of audible warning devices and of motor vehicles with regard to their audible signals

SANS 20030:2007/ECE R30:1999, IDT, Ed. Rev 2

1

Pneumatic tyres for passenger cars and their trailers

SANS 20031:1992/ECE R31:1992, IDT, Ed. 2 (SABS ECE R 31)

1

Uniform provisions concerning the approval of power-driven vehicle's sealed-beam headlamps (SB) emitting a European asymmetrical passing beam or a driving beam or both

SANS 20036:2009/ECE R36:2008, IDT, Ed. Rev 3

2

Uniform provisions concerning the approval of large passenger vehicles with regard to their general construction

SANS 20037:2007/ECE R37:2005, IDT, Ed. Rev 4

3

Uniform provisions concerning the approval of filament lamps for use in approved lamp units of power-driven vehicles and of their trailers

SANS 20039:2003/ECE R39:2003, IDT, Ed. 2

1

Uniform provisions concerning the approval of vehicles with regard to the speedometer equipment including its installation

SANS 20040:2005/ECE R40:1979, IDT, Ed. 1

1

Uniform provisions concerning the approval of motorcycles equipped with a positive-ignition engine with regard to the emission of gaseous pollutants by the engine

SANS 20041:2004/ECE R41:1994, IDT, Ed. 2

1

Uniform provisions concerning the approval of motor cycles with regard to noise

SANS 20043:2005/ECE R43:2004, IDT, Ed. 3

2

Uniform provisions concerning the approval of safety glazing materials and their installation on vehicles

SANS 20044:2010/ECE R44:2008, IDT, Ed. Rev 2 (SABS ECE R 44)

2

Uniform provisions concerning the approval of restraining devices for child occupants of powerdriven vehicles ("child restraint system")

SANS 20046:2006/ECE R46:2005, IDT, Ed. Rev 2

2

Uniform provisions concerning the approval of devices for indirect vision and of motor vehicles with regard to the installation of these devices

SANS 20047:2004/ECE R47:1981, IDT, Ed. 1

1

Uniform provisions concerning the approval of mopeds equipped with a positive-ignition engine with regard to the emission of gaseous pollutants by the engine

SANS 20048:2009/ECE R48:2008, IDT, Ed. Rev 5 (SABS ECE R 48)

3

Uniform provisions concerning the approval of vehicles with regard to the installation of lighting and light-signalling devices

SANS 20049:2009/ECE R49:2008, IDT, Ed. Rev 4

2

Uniform provisions concerning the measures to be taken against the emission of gaseous and particulate pollutants from compression-ignition engines for use in vehicles, and the emission of gaseous pollutants from positive-ignition engines fuelled with natural gas or liquefied petroleum gas for use in vehicles

SANS 20050:2007/ECE R50:2004, IDT, Ed. Rev 1

2

Uniform provisions concerning the approval of front position lamps, rear position lamps, stop lamps, direction indicators and rear-registration-plate illuminating devices for vehicles of category L

2

Uniform provisions concerning the approval of M2 and M3 small capacity vehicles with regard to their general construction

(SABS ECE R 37)

(SABS ECE R 43)

(SABS ECE R 46)

(SABS ECE R 50)

SANS 20052:2009/ECE R52:2008, IDT, Ed. Rev 3

Page 236

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 20053:2005/ECE R53:2002, IDT, Ed. Rev 1

1

Uniform provisions concerning the approval of category L3 vehicles with regard to the installation of lighting and light-signalling devices

SANS 20054:2007/ECE R54:2004, IDT, Ed. Rev 2

1

Pneumatic tyres for commercial vehicles and their trailers

SANS 20055:2003/ECE R55:2001, IDT, Ed. 2

1

Uniform provisions concerning the approval of mechanical coupling components of combinations of vehicles

SANS 20056:1989/ECE R56:1989, IDT, Ed. 2

1

Uniform provisions concerning the approval of headlamps for mopeds and vehicles treated as such

SANS 20057:1995/ECE R57:1995, IDT, Ed. 2 (SABS ECE R 57)

1

Uniform provisions concerning the approval of headlamps for motor cycles and vehicles treated as such

SANS 20059:2007/ECE R59:1983, IDT, Ed. 1

1

Uniform provisions concerning the approval of replacement silencing systems

SANS 20060:2007/ECE R60:1984, IDT, Ed. 1

1

Uniform provisions concerning the approval of twowheeled motor cycles and mopeds with regard to driver-operated controls including the identification of controls, tell-tales and indicators

SANS 20062:2007/ECE R62:1984, IDT, Ed. 1

1

Uniform provisions concerning the approval of power-driven vehicles with handlebars with regard to their protection against unauthorized use

SANS 20063:2004/ECE R63:1985, IDT, Ed. 1

1

Uniform provisions concerning the approval of twowheeled mopeds with regard to noise

SANS 20064:2007/ECE R64:1985, IDT, Ed. 1

1

Temporary-use spare wheels/tyres

SANS 20065:2007/ECE R65:2005, IDT, Ed. Rev 1

1

Uniform provisions concerning the approval of special warning lamps for power-driven vehicles and their trailers

SANS 20067:2006/ECE R67:2006, IDT, Ed. Rev 2

2

Uniform provisions concerning I. approval of specific equipment of motor vehicles using liquefied petroleum gases in their propulsion system; II. approval of a vehicle fitted with specific equipment for the use of liquefied petroleum gases in its propulsion system with regard to the installation of such equipment

SANS 20069:1987/ECE R69:1987, IDT, Ed. 1

1

Uniform provisions concerning the approval of rear marking plates for slow-moving vehicles (by construction) and their trailers

SANS 20070:1987/ECE R70:1987, IDT, Ed. 1 (SABS ECE R 70)

1

Uniform provisions concerning the approval of rear marking plates for heavy and long vehicles

SANS 20072:1988/ECE R72:1988, IDT, Ed. 1

1

Uniform provisions concerning the approval of motor cycle headlamps emitting an asymmetrical passing beam and a driving beam and equipped with halogen filament lamps (HS1)

1

Uniform provisions concerning the approval of goods vehicles, trailers and semi-trailers with regard to their lateral protection

1

Uniform provisions concerning the approval of category L1 vehicles with regard to the installation of lighting and light-signalling devices

(SABS ECE R 56)

(SABS ECE R 69)

(SABS ECE R 72)

SANS 20073:1988/ECE R73:1988, IDT, Ed. Rev 2 (SABS ECE R 73) SANS 20074:2000/ECE R74:2000, IDT, Ed. 2 (SABS ECE R 74)

Page 237

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 20075:2004/ECE R75:1997, IDT, Ed. 2

1

Uniform provisions concerning the approval of pneumatic tyres for motor cycles and mopeds

SANS 20076:1988/ECE R76:1988, IDT, Ed. 1

1

Uniform provisions concerning the approval of headlamps for mopeds emitting a driving beam and a passing beam

SANS 20078:2008/ECE R78:2007, IDT, Ed. Rev 1

2

Uniform provisions concerning the approval of vehicles of categories L1, L2, L3, L4 and L5 with regard to braking

SANS 20080:1989/ECE R80:1989, IDT, Ed. 1

1

Uniform provisions concerning the approval of seats of large passenger vehicles and of these vehicles with regard to the strength of the seats and their anchorages

1

Uniform provisions concerning the approval of rearview mirrors and of two-wheeled power-driven vehicles with or without side car, with regard to the installation of rear-view mirrors on handlebars

SANS 20082:1989/ECE R82:1989, IDT, Ed. 1 (SABS ECE R 82)

1

Uniform provisions concerning the approval of moped headlamps equipped with filament halogen lamps (HS2 lamps)

SANS 20083:2007/ECE R83:2005, IDT, Ed. Rev 3

2

Uniform provisions concerning the approval of vehicles with regard to the emission of pollutants according to engine fuel requirements

SANS 20084:2004/ECE R84:1991, IDT, Ed. 1

1

Uniform provisions concerning the approval of passenger cars equipped with an internal combustion engine with regard to the measurement of fuel consumption

SANS 20086:1993/ECE R86:1993, IDT, Ed. 1 (SABS ECE R 86)

1

Uniform provisions concerning the approval of agricultural or forestry tractors with regard to the installation of lighting and light-signalling devices

SANS 20087:2005/ECE R87:2003, IDT, Ed. 2

1

Uniform provisions concerning the approval of daytime running lamps for power-driven vehicles

SANS 20088:2007/ECE R88:1993, IDT, Ed. 1

1

Uniform provisions concerning the approval of retroreflective tyres for two-wheeled vehicles

SANS 20089:2006/ECE R89:1993, IDT, Ed. 1

1

Uniform prescriptions for approval of: I Vehicles with regard to limitation of their maximum speed or their adjustable speed limitation function; II Vehicles with regard to the installation of a speed limiting device (SLD) or adjustable speed limitation device (ASLD) of an approved type; III Speed limitation devices (SLD) and adjustable speed limitation device (ASLD)

SANS 20090:2010/ECE R90:2009, MOD, Ed. Rev 2

4

Replacement brake lining assemblies and drum brake linings for power-driven vehicles and their trailers

SANS 20091:2007/ECE R91:2003, IDT, Ed. Rev 1 (SABS ECE R 91)

2

Uniform provisions concerning the approval of sidemarker lamps for motor vehicles and their trailers

SANS 20094:2009/ECE R94:2007, IDT, Ed. Rev 1

1

Uniform provisions concerning the approval of vehicles with regard to the protection of the occupants in the event of a frontal collision

SANS 20096:2009/ECE R96:2006, IDT, Ed. 2

2

Uniform provisions concerning the approval of compression ignition (C.I.) engines to be installed in agricultural and forestry tractors and in non-road mobile machinery with regard to the emissions of pollutants by the engine

(SABS ECE R 76)

(SABS ECE R 80)

SANS 20081:1989/ECE R81:1989, IDT, Ed. 1 (SABS ECE R 81)

(SABS ECE R 83)

Page 238

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 20098:2007/ECE R98:2005, IDT, Ed. Rev 1 (SABS ECE R 98)

2

Uniform provisions concerning the approval of motor vehicle headlamps equipped with gas-discharge light sources

SANS 20099:2002/ECE R99:2001, IDT, Ed. 2

2

Uniform provisions concerning the approval of gasdischarge light sources for use in approved gasdischarge lamp units of power-driven vehicles

SANS 20101:2006/ECE R101:2005, IDT, Ed. Rev 2

1

Uniform provisions concerning the approval of passenger cars powered by an internal combustion engine only, or powered by a hybrid electric power train with regard to the measurement of the emission of carbon dioxide and fuel consumption and/or the measurement of electric energy consumption and electric range, and of categories M1 and N1 vehicles powered by an electric power train only with regard to the measurement of electric energy consumption and electric range

SANS 20104:1998/ECE R104:1998, IDT, Ed. 1 (SABS ECE R 104)

1

Uniform provisions concerning the approval of retroreflective markings for vehicles of category M, N and O

SANS 20107:2009/ECE R107:2009, IDT, Ed. Rev 2

3

Uniform provisions concerning the approval of category M2 or M3 vehicles with regard to their general construction

SANS 20108:1998/ECE R108:1998, IDT, Ed. 1 (SABS ECE R 108)

1

Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for motor vehicles and their trailers

SANS 20109:1998/ECE R109:1998, IDT, Ed. 1

1

Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for commercial vehicles and their trailers

SANS 20110:2003/ECE R110:2001, IDT, Ed. 1

1

Uniform provisions concerning the approval of: I. Specific components of motor vehicles using compressed natural gas (CNG) in their propulsion system; II. Vehicles with regard to the installation of specific components of an approved type for the use of compressed natural gas (CNG) in their propulsion system

SANS 20111:2004/ECE R111:2001, IDT, Ed. 1

1

Uniform provisions concerning the approval of tank vehicles of categories N and O with regard to rollover stability

SANS 20112:2003/ECE R112:2001, IDT, Ed. 1

1

Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with filament lamps

SANS 20119:2008/ECE R119:2005, IDT, Ed. 1

1

Uniform provisions concerning the approval of cornering lamps for power-driven vehicles

SANS 20124:2007/ECE R124:2007, IDT, Ed. 1

1

Uniform provisions concerning the approval of wheels for passenger cars and their trailers

SANS 20252:2006/ISO 20252:2006, IDT, Ed. 1

1

Market, opinion and social research - Vocabulary and service requirements

SANS 20344:2008/ISO 20344:2004, IDT, Ed. 1

1

Personal protective equipment - Test methods for footwear

SANS 20345:2008/ISO 20345:2004, IDT, Ed. 1

1

Personal protective equipment - Safety footwear

SANS 20347:2010/ISO 20347:2004, IDT, Ed. 1

1

Personal protective equipment - Occupational footwear

(SABS ECE R 99)

(SABS ECE R 109)

Page 239

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 20346:2010/ISO 20346:2004, IDT, Ed. 1

1

Personal protective equipment - Protective footwear

SANS 20474-1:2010/ISO 20474-1:2008, IDT, Ed. 1

1

Earth-moving machinery - Safety Part 1: General requirements

SANS 20474-2:2010/ISO 20474-2:2008, IDT, Ed. 1

1

Earth-moving machinery - Safety Part 2: Requirements for tractor-dozers

SANS 20474-3:2010/ISO 20474-3:2008, IDT, Ed. 1

1

Earth-moving machinery - Safety Part 3: Requirements for loaders

SANS 20474-4:2010/ISO 20474-4:2008, IDT, Ed. 1

1

Earth-moving machinery - Safety Part 4: Requirements for backhoe loaders

SANS 20474-5:2010/ISO 20474-5:2008, IDT, Ed. 1

1

Earth-moving machinery - Safety Part 5: Requirements for hydraulic excavators

SANS 20474-6:2010/ISO 20474-6:2008, IDT, Ed. 1

1

Earth-moving machinery - Safety Part 6: Requirements for dumpers

SANS 20474-7:2010/ISO 20474-7:2008, IDT, Ed. 1

1

Earth-moving machinery - Safety Part 7: Requirements for scrapers

SANS 20474-8:2010/ISO 20474-8:2008, IDT, Ed. 1

1

Earth-moving machinery - Safety Part 8: Requirements for graders

SANS 20474-9:2010/ISO 20474-9:2008, IDT, Ed. 1

1

Earth-moving machinery - Safety Part 9: Requirements for pipelayers

SANS 20474-10:2010/ISO 20474-10:2008, IDT, Ed. 1 1

Earth-moving machinery - Safety Part 10: Requirements for trenchers

SANS 20474-11:2010/ISO 20474-11:2008, IDT, Ed. 1 1

Earth-moving machinery - Safety Part 11: Requirements for earth and landfill compactors

SANS 20474-12:2010/ISO 20474-12:2008, IDT, Ed. 1 1

Earth-moving machinery - Safety Part 12: Requirements for cable excavators

SANS 20474-13:2010/ISO 20474-13:2008, IDT, Ed. 1 1

Earth-moving machinery - Safety Part 13: Requirements for rollers

ARP 20474-14:2010/ISO/TS 20474-14:2008, IDT, Ed. 1 1

Earth-moving machinery - Safety Part 14: Information on national and regional provisions

SANS 20482:2004/ISO 20482:2003, IDT, Ed. 1

1

Metallic materials - Sheet and strip - Erichsen cupping test

SANS 20514:2007/ISO/TR 20514:2005, IDT, Ed. 1

1

Health informatics - Electronic health record Definition, scope and context

SANS 20712-1:2008/ISO 20712-1:2008, IDT, Ed. 1

1

Water safety signs and beach safety flags Part 1: Specifications for water safety signs used in workplaces and public areas

SANS 20775:2009/ISO 20775:2009, IDT, Ed. 1

1

Information and documentation - Schema for holdings information

SANS 20807:2004/ISO 20807:2004, IDT, Ed. 1

1

Non-destructive testing - Qualification of personnel for limited applications of non-destructive testing

Page 240

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 20825:1993 (SABS 20825)

1

Environmentally acceptable hand dishwashing and light duty detergent (liquid)

SANS 20864:2009/ISO 20864:2004, IDT, Ed. 1

1

Footwear - Test methods for stiffeners and toepuffs Mechanical characteristics

SANS 20904:2007/ISO 20904:2006, IDT, Ed. 1

1

Hard coal - Sampling of slurries

SANS 20905:2006/ISO 20905:2004, IDT, Ed. 1

1

Coal preparation - Determination of dust/moisture relationship for coal

SANS 20926:2004/ISO/IEC 20926:2003, IDT, Ed. 1

1

Software engineering - IFPUG 4.1 Unadjusted functional size measurement method - Counting practices manual

SANS 21003-1:2008/ISO 21003-1:2007, IDT, Ed. 1

1

Multilayer piping systems for hot and cold water installations inside buildings Part 1: General

SANS 21003-2:2008/ISO 21003-2:2007, IDT, Ed. 1

1

Multilayer piping systems for hot and cold water installations inside buildings Part 2: Pipes

SANS 21003-3:2008/ISO 21003-3:2007, IDT, Ed. 1

1

Multilayer piping systems for hot and cold water installations inside buildings Part 3: Fittings

SANS 21003-5:2008/ISO 21003-5:2007, IDT, Ed. 1

1

Multilayer piping systems for hot and cold water installations inside buildings Part 5: Fitness for purpose of the system

SANS 21047:2009/ISO 21047:2009, IDT, Ed. 1

1

Information and documentation - International Standard Text Code (ISTC)

SANS 21127:2009/ISO 21127:2006, IDT, Ed. 1

1

Information and documentation - A reference ontology for the interchange of cultural heritage information

SANS 21138-1:2008/ISO 21138-1:2007, IDT, Ed. 1

1

Plastics piping systems for non-pressure underground drainage and sewerage - Structuredwall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1: Material specifications and performance criteria for pipes, fittings and system

SANS 21138-2:2008/ISO 21138-2:2007, IDT, Ed. 1

1

Plastics piping systems for non-pressure underground drainage and sewerage - Structuredwall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2: Pipes and fittings with smooth external surface, Type A

SANS 21138-3:2008/ISO 21138-3:2007, IDT, Ed. 1

1

Plastics piping systems for non-pressure underground drainage and sewerage - Structuredwall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 3: Pipes and fittings with nonsmooth external surface, Type B

SANS 21148:2008/ISO 21148:2005, IDT, Ed. 1

1

Cosmetics - Microbiology - General instructions for microbiological examination

SANS 21149:2008/ISO 21149:2006, IDT, Ed. 1

1

Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria

SANS 21183-1:2006/ISO 21183-1:2005, IDT, Ed. 1

1

Light conveyor belts Part 1: Principal characteristics and applications

Page 241

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 21183-2:2006/ISO 21183-2:2005, IDT, Ed. 1

1

Light conveyor belts Part 2: List of equivalent terms

SANS 21188:2006/ISO 21188:2006, IDT, Ed. 1

1

Public key infrastructure for financial services Practices and policy framework

SANS 21398:2007/ISO 21398:2007, IDT, Ed. 1

1

Hard coal and coke - Guidance to the inspection of mechanical sampling systems

SANS 21487:2009/ISO 21487:2006, IDT, Ed. 1

1

Small craft - Permanently installed petrol and diesel fuel tanks

SANS 21527-1:2009/ISO 21527-1:2008, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of yeasts and moulds Part 1: Colony count technique in products with water activity greater than 0,95

SANS 21528-1:2005/ISO 21528-1:2004, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Horizontal methods for the detection and enumeration of Enterobacteriaceae Part 1: Detection and enumeration by MPN technique with pre-enrichment

SANS 21528-2:2005/ISO 21528-2:2004, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Horizontal methods for the detection and enumeration of Enterobacteriaceae Part 2: Colonycount method

SANS 21567:2005/ISO 21567:2004, IDT, Ed. 1

1

Microbiology of food and animal feeding stuffs Horizontal method for the detection of Shigella spp.

SANS 21571:2006/ISO 21571:2005, IDT, Ed. 1

1

Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Nucleic acid extraction

SANS 21572:2005/ISO 21572:2004, IDT, Ed. 1

1

Foodstuffs - Methods for the detection of genetically modified organisms and derived products - Protein based methods

SANS 21747:2008/ISO 21747:2006, IDT, Ed. 1

1

Statistical methods - Process performance and capability statistics for measured quality characteristics

SANS 21827:2005/ISO/IEC 21827:2002, IDT, Ed. 1

1

Information technology - Systems security engineering - Capability Maturity Model (SSE-CMM)

SANS 22000:2005/ISO 22000:2005, IDT, Ed. 1

1

Food safety management systems - Requirements for any organization in the food chain

SANS 22003:2007/ISO/TS 22003:2007, IDT, Ed. 1

1

Food safety management systems - Requirements for bodies providing audit and certification of food safety management systems

SANS 22004:2006/ISO/TS 22004:2005, IDT, Ed. 1

1

Food safety management systems - Guidance on the application of ISO 22000:2005

SANS 22005:2009/ISO 22005:2007, IDT, Ed. 1

1

Traceability in the feed and food chain - General principles and basic requirements for system design and implementation

SANS 22112:2008/ISO 22112:2005, IDT, Ed. 1

1

Dentistry - Artificial teeth for dental prostheses

SANS 22128:2009/ISO 22128:2008, IDT, Ed. 1

1

Terminology products and services - Overview and guidance

Page 242

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 22134:2008/ISO 22134:2007, IDT, Ed. 1

1

Practical guidelines for socioterminology

SANS 22222:2006/ISO 22222:2005, IDT, Ed. 1

1

Personal financial planning - Requirements for personal financial planners

SANS 22307:2008/ISO 22307:2008, IDT, Ed. 1

1

Financial services - Privacy impact assessment

SANS 22310:2006/ISO 22310:2006, IDT, Ed. 1

1

Information and documentation - Guidelines for standards drafters for stating records management requirements in standards

SANS 22391-1:2008/ISO 22391-1:2007, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) Part 1: General

SANS 22391-2:2008/ISO 22391-2:2007, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) Part 2: Pipes

SANS 22391-3:2008/ISO 22391-3:2007, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) Part 3: Fittings

SANS 22391-5:2008/ISO 22391-5:2007, IDT, Ed. 1

1

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) Part 5: Fitness for purpose of the system

SANS 22411:2009/ISO/TR 22411:2008, IDT, Ed. 1

1

Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities

SANS 22514-3:2009/ISO 22514-3:2008, IDT, Ed. 1

1

Statistical methods in process management Capability and performance Part 3: Machine performance studies for measured data on discrete parts

SANS 22514-4:2008/ISO/TR 22514-4:2007, IDT, Ed. 1

1

Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures

SANS 22674:2008/ISO 22674:2006, IDT, Ed. 1

1

Dentistry - Metallic materials for fixed and removable restorations and appliances

SANS 22718:2009/ISO 22718:2006, IDT, Ed. 1

1

Cosmetics - Microbiology - Detection of Staphylococcus aureus

SANS 22775:2009/ISO 22775:2004, IDT, Ed. 1

1

Footwear - Test methods for accessories: Metallic accessories - Corrosion resistance

SANS 22938:2009/ISO 22938:2008, IDT, Ed. 1

1

Document management - Electronic content/document management (CDM) data interchange format

SANS 22971:2010/ISO/TR 22971:2005, IDT, Ed. 1

1

Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results

SANS 23045:2009/ISO 23045:2008, IDT, Ed. 1

1

Building environment design - Guidelines to assess energy efficiency of new buildings

SANS 23081-1:2006/ISO 23081-1:2006, IDT, Ed. 1

2

Information and documentation - Records management processes - Metadata for records Part 1: Principles

Page 243

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 23081-2:2010/ISO 23081-2:2009, IDT, Ed. 1

1

Information and documentation - Managing metadata for records Part 2: Conceptual and implementation issues

SANS 23279:2010/ISO 23279:2007, IDT, Ed. 1

1

Non-destructive testing of welds - Ultrasonic testing Characterization of indications in welds

SANS 23297:2009/ISO 23297:2008, IDT, Ed. 1

1

Thermoplastics hoses and hose assemblies - Wire or synthetic yarn reinforced single-pressure types for hydraulic applications - Specification

SANS 23529:2006/ISO 23529:2004, IDT, Ed. 1

1

Rubber - General procedures for preparing and conditioning test pieces for physical test methods

SANS 23601:2010/ISO 23601:2009, IDT, Ed. 1

1

Safety identification - Escape and evacuation plan signs

SANS 23711:2008/ISO 23711:2003, IDT, Ed. 1

1

Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers

SANS 23814:2009/ISO 23814:2009, IDT, Ed. 1

1

Cranes - Competency requirements for crane inspectors

SANS 23853:2006/ISO 23853:2004, IDT, Ed. 1

1

Cranes - Training of slingers and signallers

SANS 23868:2008/ISO 23868:2008, IDT, Ed. 1

1

Document management - Monitoring and verification of information stored on 130 mm optical media

SANS 24014-1:2007/ISO 24014-1:2007, IDT, Ed. 1

1

Public transport - Interoperable fare management system Part 1: Architecture

SANS 24134:2007/ISO 24134:2006, IDT, Ed. 1

1

Industrial trucks - Additional requirements for automated functions on trucks

SANS 24135-1:2007/ISO 24135-1:2006, IDT, Ed. 1

1

Industrial trucks - Specifications and test methods for operator restraint systems Part 1: Lap-type seat belts

SANS 24234:2008/ISO 24234:2004, IDT, Ed. 1

1

Dentistry - Mercury and alloys for dental amalgam

SANS 24497-1:2010/ISO 24497-1:2007, IDT, Ed. 1

1

Non-destructive testing - Metal magnetic memory Part 1: Vocabulary

SANS 24517-1:2008/ISO 24517-1:2008, IDT, Ed. 1

1

Document management - Engineering document format using PDF Part 1: Use of PDF 1.6 (PDF/E-1)

SANS 24535:2007

1

Intelligent transport systems - Framework for electronic registration and identification of vehicles using passive radio frequency identification (RFID)

SANS 24537:2007/ISO 24537:2007, IDT, Ed. 1

1

Micrographics - Dimensions for reels used for 16 mm and 35 mm microfilm

SANS 24570:2005/ISO/IEC 24570:2005, IDT, Ed. 1

1

Software engineering - NESMA functional size measurement method version 2.1 - Definitions and counting guidelines for the application of Function Point Analysis

SANS 24613:2009/ISO 24613:2008, IDT, Ed. 1

1

Language resource management - Lexical markup framework (LMF)

Page 244

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 24705:2007/ISO/IEC TR 24705:2005, IDT, Ed. 1 1

Information technology - Office machines - Machines for colour image reproduction - Method of specifying image reproduction of colour devices by digital and analog test charts

SANS 24709-1:2007/ISO/IEC 24709-1:2007, IDT, Ed. 1 1

Information technology - Conformance testing for the biometric application programming interface (BioAPI) Part 1: Methods and procedures

SANS 24709-2:2007/ISO/IEC 24709-2:2007, IDT, Ed. 1 1

Information technology - Conformance testing for the biometric application programming interface (BioAPI) Part 2: Test assertions for biometric service providers

SANS 24710:2008/ISO/IEC TR 24710:2005, IDT, Ed. 1 1

Information technology - Radio frequency identification for item management - Elementary tag licence plate functionality for ISO/IEC 18000 air interface definitions

SANS 24711:2008/ISO/IEC 24711:2007, IDT, Ed. 2

1

Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components

SANS 24713-1:2009/ISO/IEC 24713-1:2008, IDT, Ed. 1 1

Information technology - Biometric profiles for interoperability and data interchange Part 1: Overview of biometric systems and biometric profiles

SANS 24713-2:2009/ISO/IEC 24713-2:2008, IDT, Ed. 1 1

Information technology - Biometric profiles for interoperability and data interchange Part 2: Physical access control for employees at airports

SANS 24714-1:2009/ISO/IEC TR 24714-1:2008, IDT, 1 Ed. 1

Information technology - Biometrics - Jurisdictional and societal considerations for commercial applications Part 1: General guidance

SANS 24720:2009/ISO/IEC TR 24720:2008, IDT, Ed. 1 1

Information technology - Automatic identification and data capture techniques - Guidelines for direct part marking (DPM)

SANS 24722:2007/ISO/IEC TR 24722:2007, IDT, Ed. 1 1

Information technology - Biometrics - Multimodal and other multibiometric fusion

1

Information technology - Automatic identification and data capture techniques - MicroPDF417 bar code symbology specification

SANS 24729-1:2009/ISO/IEC TR 24729-1:2008, IDT, 1 Ed. 1

Information technology - Radio frequency identification for item management - Implementation guidelines Part 1: RFID-enabled labels and packaging supporting ISO/IEC 18000-6C

SANS 24729-2:2009/ISO/IEC TR 24729-2:2008, IDT, 1 Ed. 1

Information technology - Radio frequency identification for item management - Implementation guidelines Part 2: Recycling and RFID tags

SANS 24730-1:2008/ISO/IEC 24730-1:2006, IDT, Ed. 1 1

Information technology - Real-time locating systems (RTLS) Part 1: Application program interface (API)

SANS 24730-2:2008/ISO/IEC 24730-2:2006, IDT, Ed. 1 1

Information technology - Real-time locating systems (RTLS) Part 2: 2,4 GHz air interface protocol

SANS 24734:2009/ISO/IEC 24734:2009, IDT, Ed. 1

1

Information technology - Office equipment - Method for measuring digital printing productivity

SANS 24735:2009/ISO/IEC 24735:2009, IDT, Ed. 1

1

Information technology - Office equipment - Method for measuring digital copying productivity

SANS 24728:2008/ISO/IEC 24728:2006, IDT, Ed. 1

Page 245

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 24741:2009/ISO/IEC TR 24741:2007, IDT, Ed. 1 1

Information technology - Biometrics tutorial

SANS 24744:2008/ISO/IEC 24744:2007, IDT, Ed. 1

1

Software engineering - Metamodel for development methodologies

SANS 24762:2008/ISO/IEC 24762:2008, IDT, Ed. 1

1

Information technology - Security techniques Guidelines for information and communications technology disaster recovery services

SANS 24773:2009/ISO/IEC 24773:2008, IDT, Ed. 1

1

Software engineering - Certification of software engineering professionals - Comparison framework

SANS 24774:2008/ISO/IEC TR 24774:2007, IDT, Ed. 1 1

Software and systems engineering - Life cycle management - Guidelines for process description

SANS 24778:2008/ISO/IEC 24778:2008, IDT, Ed. 1

1

Information technology - Automatic identification and data capture techniques - Aztec Code bar code sympology specification

SANS 25000:2007/ISO/IEC 25000:2005, IDT, Ed. 1

1

Software Engineering - Software product quality requirements and evaluation (SQuaRE) - Guide to SQuaRE

SANS 25001:2008/ISO/IEC 25001:2007, IDT, Ed. 1

1

Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Planning and management

SANS 25012:2009/ISO/IEC 25012:2008, IDT, Ed. 1

1

Software engineering - Software product quality requirements and evaluation (SQuaRE) - Data quality model

SANS 25020:2008/ISO/IEC 25020:2007, IDT, Ed. 1

1

Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) Measurement reference model and guide

SANS 25021:2008/ISO/IEC TR 25021:2007, IDT, Ed. 1 1

Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Quality measure elements

SANS 25030:2008/ISO/IEC 25030:2007, IDT, Ed. 1

1

Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Quality requirements

SANS 25051:2007/ISO/IEC 25051:2006, IDT, Ed. 1

1

Software engineering - Software product quality requirements and evaluation (SQuaRE) Requirements for quality of Commercial Off-TheShelf (COTS) software product and instructions for testing

SANS 25062:2009/ISO/IEC 25062:2006, IDT, Ed. 1

1

Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability test reports

SANS 25577:2009/ISO 25577:2008, IDT, Ed. 1

1

Information and documentation - MarkXchange

SANS 25599:2008/ISO/TR 25599:2005, IDT, Ed. 1

1

Cranes - Jib cranes - International standards for design, manufacturing, use and maintenance requirements and recommendations

SANS 25639-1:2009/ISO 25639-1:2008, IDT, Ed. 1

1

Exhibitions, shows, fairs and conventions Part 1: Vocabulary

SANS 25639-2:2009/ISO 25639-2:2008, IDT, Ed. 1

1

Exhibitions, shows, fairs and conventions Part 2: Measurement procedures for statistical purposes

Page 246

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SATR 26122:2010/ISO/TR 26122:2008, IDT, Ed. 1

1

Information and documentation - Work process analysis for records

SANS 26300:2008/ISO/IEC 26300:2006, IDT, Ed. 1

1

Information technology - Open Document Format for Office Applications (OpenDocument) v1.0

SANS 26514:2009/ISO/IEC 26514:2008, IDT, Ed. 1

1

Systems and software engineering - Requirements for designers and developers of user documentation

SANS 26702:2008/ISO/IEC 26702:2007, IDT, Ed. 1

1

Systems engineering - Application and management of the systems engineering process

SANS 26825:2009/ISO 26825:2008, IDT, Ed. 1

1

Anaesthetic and respiratory equipment - Userapplied labels for syringes containing drugs used during anaesthesia - Colours, design and performance

SANS 27000:2009/ISO/IEC 27000:2009, IDT, Ed. 1

1

Information technology - Security techniques Information security management systems Overview and vocabulary

SANS 27001:2006/ISO/IEC 27001:2005, IDT, Ed. 1

1

Information technology - Security techniques Information security management systems Requirements

SANS 27002:2008/ISO/IEC 27002:2005, IDT, Ed. 1

1

Information technology - Security techniques - Code of practice for information security management

SANS 27005:2009/ISO/IEC 27005:2008, IDT, Ed. 1

1

Information technology - Security techniques Information security risk management

SANS 27006:2010/ISO/IEC 27006:2007, IDT, Ed. 1

1

Information technology - Security techniques Requirements for bodies providing audit and certification of information security management systems

SANS 27011:2009/ISO/IEC FDIS 27011:2008, IDT, Ed. 1

1

Information technology - Information security management guidelines for telecommunications

SANS 27668-1:2009/ISO 27668-1:2009, IDT, Ed. 1

1

Gel ink ball pens and refills Part 1: General use

SANS 27668-2:2009/ISO 27668-2:2009, IDT, Ed. 1

1

Gel ink ball pens and refills Part 2: Documentary use (DOC)

SANS 27687:2008/ISO/TS 27687:2008, IDT, Ed. 1

1

Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate

SANS 28003:2008/ISO 28003:2007, IDT, Ed. 1

1

Security management systems for the supply chain Requirements for bodies providing audit and certification of supply chain security management systems

SANS 28017:2009/ISO 28017:2009, IDT, Ed. 1

1

Rubber hoses and hose assemblies, Wire or textile reinforced, for dredging applications - Specification

SANS 28500:2009/ISO 28500:2009, IDT, Ed. 1

1

Information and documentation - WARC file format

SANS 29001:2009/ISO/TS 29001:2007, IDT, Ed. 2

2

Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems Requirements for product and service supply organizations

Page 247

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 29881:2009/ISO/IEC 29881:2008, IDT, Ed. 1

1

Information technology - Software and systems engineering - FiSMA 1.1 functional size measurement method

SANS 29901:2010/ISO/TR 29901:2007, IDT, Ed. 1

1

Selected illustrations of full factorial experiments with four factors

SANS 30042:2009/ISO 30042:2008, IDT, Ed. 1

1

Systems to manage terminology, knowledge, and content - TermBase eXchange (TBX)

SANS 31000:2009/ISO 31000:2009, IDT, Ed. 1

1

Risk management - Principles and guidelines

SANS 31010:2010/IEC ISO 31010:2009, IDT, Ed. 1

1

Risk management - Risk assessment techniques

SANS 32000-1:2008/ISO 32000-1:2008, IDT, Ed. 1

1

Document management - Portable document format Part 1: PDF 1.7

SANS 38500:2009/ISO/IEC 38500:2008, IDT, Ed. 1

1

Corporate governance of information technology

SANS 42010:2008/ISO/IEC 42010:2007, IDT, Ed. 1

1

Systems and software engineering - Recommended practice for architectural description and softwareintensive systems

SANS 50025-1:2009/EN 10025-1:2004, IDT, Ed. 1

1

Hot rolled products of structural steels Part 1: General technical delivery conditions

SANS 50025-2:2009/EN 10025-2:2004, IDT, Ed. 1

1

Hot rolled products of structural steels Part 2: Technical delivery conditions for non-alloy structural steels

SANS 50025-3:2009/EN 10025-3:2004, IDT, Ed. 1

1

Hot rolled products of structural steels Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

SANS 50025-4:2009/EN 10025-4:2004, IDT, Ed. 1

1

Hot rolled products of structural steels Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels

SANS 50025-5:2009/EN 10025-5:2004, IDT, Ed. 1

1

Hot rolled products of structural steels Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

SANS 50025-6:2009/EN 10025-6:2004, IDT, Ed. 1

1

Hot rolled products of structural steels Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

SANS 50028-1:2004/EN 10028-1:2000, IDT, Ed. 2

1

Flat products made of steels for pressure purposes Part 1: General requirements

SANS 50028-2:2009/EN 10028-2:2009, IDT, Ed. 3

1

Flat products made of steels for pressure purposes Part 2: Non-alloy and alloy steels with specified elevated temperature properties

SANS 50028-3:2009/EN 10028-3:2009, IDT, Ed. 3

1

Flat products made of steels for pressure purposes Part 3: Weldable fine grain steels, normalized

SANS 50028-4:2009/EN 10028-4:2009, IDT, Ed. 3

1

Flat products made of steels for pressure purposes Part 4: Nickel alloy steels with specified low temperature properties

SANS 50028-5:2009/EN 10028-5:2009, IDT, Ed. 3

1

Flat products made of steels for pressure purposes Part 5: Weldable fine grain steels, thermomechanically rolled

Page 248

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 50028-6:2009/EN 10028-6:2009, IDT, Ed. 3

1

Flat products made of steels for pressure purposes Part 6: Weldable fine grain steels, quenched and tempered

SANS 50028-7:2005/EN 10028-7:2000, MOD, Ed. 1

1

Flat products made of steels for pressure purposes Part 7: Stainless steels

SANS 50054-1:2009/EN 54-1:1996, IDT, Ed. 2 (SABS EN 54-1)

2

Fire detection and fire alarm systems Part 1: Introduction

SANS 50054-2:1997/EN 54-2:1997, IDT

1

Fire detection and fire alarm systems Part 2: Control and indicating equipment

SANS 50054-3:2001/EN 54-3:2001, IDT, Ed. 1 (SABS EN 54-3)

1

Fire detection and fire alarm systems Part 3: Fire alarm devices - Sounders

SANS 50054-4:1997/EN 54-4:1997, IDT, Ed. 1

1

Fire detection and fire alarm systems Part 4: Power supply equipment

SANS 50054-5:2000/EN 54-5:2000, IDT, Ed. 2 (SABS EN 54-5)

2

Fire detection and fire alarm systems Part 5: Heat detectors - Point detectors

SANS 50054-7:2000/EN 54-7:2000, IDT, Ed. 2

2

Fire detection and fire alarm systems Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization

SANS 50054-11:2001/EN 54-11:2001, IDT, Ed. 1 (SABS EN 54-11)

1

Fire detection and fire alarm systems Part 11: Manual call points

SANS 50054-20:2009/EN 54-20:2006, IDT, Ed. 1

1

Fire detection and fire alarm systems Part 20: Aspirating smoke detectors

SANS 50060:1989/EN 50060:1989, IDT (SABS EN 50060)

1

Power sources for manual arc welding with limited duty

SANS 50081-1:2004/EN 81-1:1998, IDT, Ed. 2

1

Safety rules for the construction and installation of lifts Part 1: Electric lifts

SANS 50081-2:1998/EN 81-2:1998, IDT, Ed. 2 (SABS EN 81-2)

1

Safety rules for the construction and installation of lifts Part 2: Hydraulic lifts

SANS 50081-3:2005/EN 81-3:2000, IDT, Ed. 1

1

Safety rules for the construction and installation of lifts Part 3: Electric and hydraulic service lifts

SANS 50081-70:2004/EN 81-70:2003, IDT, Ed. 1

1

Safety rules for the construction and installation of lifts - Particular applications for passenger and goods lifts Part 70: Accessibility to lifts for persons including persons with disability

SANS 50081-72:2005/EN 81-72:2003, IDT, Ed. 1

1

Safety rules for the construction and installation of lifts - Particular applications for passenger and goods lifts Part 72: Fire fighters lifts

SANS 50081-80:2005/EN 81-80:2003, IDT, Ed. 1

1

Safety rules for the construction and installation of lifts - Existing lifts Part 80: Rules for the improvement of safety of existing passenger and goods lifts

SANS 50116:2007/EN 116:1997, IDT, Ed. 1

1

Diesel and domestic heating fuels - Determination of cold filter plugging point

SANS 50124:1994/EN 124:1994, IDT, Ed. 2

1

Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control

(SABS EN 54-2)

(SABS EN 54-4)

(SABS EN 54-7)

(SABS EN 124)

Page 249

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 50132:1998/EN 132:1998, IDT, Ed. 3 (SABS EN 132)

1

Respiratory protective devices - Definitions of terms and pictograms

SANS 50133:2003/EN 133:2001, IDT, Ed. 3

2

Respiratory protective devices - Classification

SANS 50134:1998/EN 134:1998, IDT (SABS EN 134)

1

Respiratory protective devices - Nomenclature of components

SANS 50135:1998/EN 135:1998, IDT, Ed. 3

1

Respiratory protective devices - List of equivalent terms

SANS 50136:1998/EN 136:1998, IDT, Ed. 1 (SABS EN 136)

1

Respiratory protective devices - Full face masks Requirements, testing, marking

SANS 50137:1993/EN 137:1993, IDT

1

Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus Requirements, testing, marking

SANS 50138:1994/EN 138:1994, IDT (SABS EN 138)

1

Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking

SANS 50140:1998/EN 140:1998, IDT, Ed. 2 (SABS EN 140)

1

Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking

SANS 50141:2003/EN 141:2000, IDT, Ed. 2

2

Respiratory protective devices - Gas filters and combined filters - Requirements, testing, marking

SANS 50142:2003/EN 142:2002, IDT, Ed. 2 (SABS EN 142)

2

Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking

SANS 50143:2003/EN 143:2000, IDT, Ed. 2

2

Respiratory protective devices - Particle filters Requirements, testing, marking

SANS 50144-1:2003/EN 144-1:2000, IDT, Ed. 2 (SABS EN 144-1)

2

Respiratory protective devices - Gas cylinder valves Part 1: Thread connections for insert connector

SANS 50144-2:1998/EN 144-2:1998, IDT

1

Respiratory protective devices - Gas cylinder valves - Outlet connections

SANS 50145:1997/EN 145:1997, IDT, Ed. 2 (SABS EN 145)

1

Respiratory protective devices - Self-contained closed-circuit breathing apparatus - Compressed oxygen or compressed oxygen-nitrogen type Requirements, testing, marking

SANS 50145-2:1992/EN 145-2:1992, IDT

1

Respiratory protective devices - Self-contained closed-circuit compressed oxygen breathing apparatus for special use - Safety requirements, testing, marking

2

Respiratory protective devices - Threads for facepieces Part 1: Standard thread connection

SANS 50148-2:2003/EN 148-2:1999, IDT, Ed. 2 (SABS EN 148-2)

2

Respiratory protective devices - Threads for facepieces Part 2: Centre thread connection

SANS 50148-3:2003/EN 148-3:1999, IDT, Ed. 2

2

Respiratory protective devices - Threads for facepieces Part 3: Thread connection M 45 x 3

2

Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking

(SABS EN 133)

(SABS EN 135)

(SABS EN 137)

(SABS EN 141)

(SABS EN 143)

(SABS EN 144-2)

(SABS EN 145-2)

SANS 50148-1:2003/EN 148-1:1999, IDT, Ed. 2 (SABS EN 148-1)

(SABS EN 148-3) SANS 50149:2003/EN 149:2001, IDT, Ed. 2 (SABS EN 149)

Page 250

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 50169:1992/EN 169:1992, IDT (SABS EN 169)

1

Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended utilisation

SANS 50196-1:2006/EN 196-1:2005, IDT, Ed. 2

2

Methods of testing cement Part 1: Determination of strength

SANS 50196-2:2006/EN 196-2:2005, IDT, Ed. 2 (SABS EN 196-2)

2

Methods of testing cement Part 2: Chemical analysis of cement

SANS 50196-3:2006/EN 196-3:2005, IDT, Ed. 2

2

Methods of testing cement Part 3: Determination of setting times and soundness

SANS 50196-4:1993/ENV 196-4:1993, MOD (SABS ENV 196-4)

1

Methods of testing cement Part 4: Quantitative determination of constituents

SANS 50196-5:2009/EN 196-5:2005, MOD, Ed. 2

2

Methods of testing cement Part 5: Pozzolanicity test for pozzolanic cement

SANS 50196-6:1989/EN 196-6:1989, MOD (SABS EN 196-6)

1

Methods of testing cement Part 6: Determination of fineness

SANS 50196-7:2009/EN 196-7:2007, IDT, Ed. 2

2

Methods of testing cement Part 7: Methods of taking and preparing samples of cement

SANS 50197-1:2000/EN 197-1:2000, IDT, Ed. 1 (SABS EN 197-1)

1

Cement Part 1: Composition, specifications and conformity criteria for common cements

SANS 50197-2:2000/EN 197-2:2000, IDT, Ed. 1

1

Cement Part 2: Conformity evaluation

SANS 50198:1987/EN 198:1987, IDT (SABS EN 198)

1

Specification for finished baths for domestic purposes made of acrylic material

SANS 50242:2010/EN 50242/EN 60436:2008, IDT, Ed. 1

1

Electric dishwashers for household use - Methods for measuring the performance

SANS 50250:2003/EN 250:2000, IDT, Ed. 2 (SABS EN 250)

2

Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking

SANS 50269:1994/EN 269:1994, IDT

1

Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood Requirements, testing, marking

SANS 50270:1994/EN 270:1994, IDT (SABS EN 270)

1

Respiratory protective devices - Compressed air line breathing apparatus incorporating a hood Requirements, testing, marking

SANS 50286-1:1998/EN 286-1:1998, IDT, Ed. 2

1

Simple unfired pressure vessels designed to contain air or nitrogen Part 1: Pressure vessels for general purposes

SANS 50286-2:1992/EN 286-2:1992, IDT, Ed. 1 (SABS EN 286-2)

1

Simple unfired pressure vessels designed to contain air or nitrogen Part 2: Pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers

SANS 50286-3:1994/EN 286-3:1994, IDT, Ed. 1 (SABS EN 286-3)

1

Simple unfired pressure vessels designed to contain air or nitrogen Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock

(SABS EN 196-1)

(SABS EN 196-3)

(SABS EN 196-5)

(SABS EN 196-7)

(SABS EN 197-2)

(SABS EN 269)

(SABS EN 286-1)

Page 251

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 50286-4:1994/EN 286-4:1994, IDT, Ed. 1 (SABS EN 286-4)

1

Simple unfired pressure vessels designed to contain air or nitrogen Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock

SANS 50295-1:1991/EN 295-1:1991, IDT (SABS EN 295-1)

1

Vitrified clay pipes and fittings and pipe joints for drains and sewers Part 1: Requirements

SANS 50295-2:1991/EN 295-2:1991, IDT

1

Vitrified clay pipes and fittings and pipe joints for drains and sewers Part 2: Quality control and sampling

SANS 50295-3:1991/EN 295-3:1991, IDT (SABS EN 295-3)

1

Vitrified clay pipes and fittings and pipe joints for drains and sewers Part 3: Test methods

SANS 50304:2010/EN 50304/EN 60350:2009, IDT, Ed. 1

1

Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance

SANS 50312:2007/EN 312:2003, IDT, Ed. 1

1

Particleboards - Specifications

SANS 50341:1992/EN 341:1992, IDT, Ed. 1 (SABS EN 341)

1

Personal protective equipment against falls from a height - Descender devices

SANS 50352-1:2008/EN 352-1:1993, MOD, Ed. 1

1.01

Hearing protectors - Safety requirements and testing Part 1: Ear-muffs

SANS 50352-2:2008/EN 352-2:1993, MOD, Ed. 1 (SABS 50352-2)

1.01

Hearing protectors - Safety requirements and testing Part 2: Ear-plugs

SANS 50352-3:2008/EN 352-3:1996, MOD, Ed. 1

1.01

Hearing protectors - Safety requirements and testing Part 3: Ear-muffs attached to an industrial safety helmet

SANS 50352-5:2005/EN 352-5:2002, IDT, Ed. 1

1

Hearing protectors - Safety requirements and testing Part 5: Active noise reduction ear-muffs

SANS 50352-6:2005/EN 352-6:2002, IDT, Ed. 1

1

Hearing protectors - Safety requirements and testing Part 6: Ear-muffs with electrical audio input

SANS 50352-7:2005/EN 352-7:2002, IDT, Ed. 1

1

Hearing protectors - Safety requirements and testing Part 7: Level-dependent ear-plugs

SANS 50353-1:2003/EN 353-1:2002, IDT, Ed. 2

2

Personal protective equipment against falls from a height - Guided type fall arresters including a rigid anchor line

SANS 50353-2:2003/EN 353-2:2002, IDT, Ed. 2 (SABS EN 353-2)

2

Personal protective equipment against falls from a height - Guided type fall arresters including a flexible anchor line

SANS 50354:2003/EN 354:2002, IDT, Ed. 2

2

Personal protective equipment against falls from a height - Lanyards

SANS 50355:2003/EN 355:2002, IDT, Ed. 2 (SABS EN 355)

2

Personal protective equipment against falls from a height - Energy absorbers

SANS 50358:2008/EN 358:1999, IDT, Ed. 2

2

Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards

2

Personal protective equipment against falls from a height - Retractable type fall arresters

(SABS EN 295-2)

(SABS 50352-1)

(SABS 50352-3)

(SABS EN 353-1)

(SABS EN 354)

(SABS EN 358)

SANS 50360:2003/EN 360:2002, IDT, Ed. 2 (SABS EN 360)

Page 252

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 50361:2003/EN 361:2002, IDT, Ed. 2 (SABS EN 361)

2

Personal protective equipment against falls from a height - Full body harnesses

SANS 50362:2008/EN 362:2004, IDT, Ed. 2

2

Personal protective equipment against falls from a height - Connectors

SANS 50363:2003/EN 363:2002, IDT, Ed. 2 (SABS EN 363)

2

Personal protective equipment against falls from a height - Fall arrest systems

SANS 50364:1992/EN 364:1992, IDT

1

Personal protective equipment against falls from a height - Test methods

SANS 50365:2008/EN 365:2004, IDT, Ed. 2 (SABS EN 365)

2

Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging

SANS 50371:1992/EN 371:1992, IDT (SABS EN 371)

1

Respiratory protective devices - AX gas filters and combined filters against low boiling organic compounds - Requirements, testing, marking

SANS 50372:1992/EN 372:1992, IDT

1

Respiratory protective devices - SX gas filters and combined filters against specific named compounds - Requirements, testing, marking

SANS 50381-1:1993/EN 381-1:1993, IDT, Ed. 1 (SABS EN 381-1)

1

Protective clothing for users of hand-held chain saws Part 1: Test rig for testing resistance to cutting by a chain saw

SANS 50381-2:1995/EN 381-2:1995, IDT, Ed. 1

1

Protective clothing for users of hand-held chain saws Part 2: Test methods for leg protectors

SANS 50381-5:1995/EN 381-5:1995, IDT, Ed. 1 (SABS EN 381-5)

1

Protective clothing for users of hand-held chain saws Part 5: Requirements for leg protectors

SANS 50402:2006/EN 402:2003, IDT, Ed. 2

2

Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking

2

Respiratory protective devices for self-rescue Filtering devices with hood for escape from fire Requirements, testing, marking

SANS 50404:2007/EN 404:2005, IDT, Ed. 2 (SABS EN 404)

2

Respiratory protective devices for self-rescue - Filter self-rescuer from carbon monoxide with mouthpiece assembly

SANS 50405:2003/EN 405:2001, IDT, Ed. 2

2

Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking

SANS 50413-1:2004/EN 413-1:2004, IDT, Ed. 1

2

Masonry cement Part 1: Composition, specifications and conformity criteria

SANS 50413-2:2006/EN 413-2:2005, IDT, Ed. 2

2

Masonry cement Part 2: Test methods

SANS 50443:2008/EN 443:2008, IDT, Ed. 2

1

Helmets for fire fighting in buildings and other structures

SANS 50444:2009/EN 50444:2008, IDT, Ed. 1

1

Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied processes

SANS 50458:2008/EN 458:2004, IDT, Ed. 2 (SABS EN 458)

2

Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document

(SABS EN 362)

(SABS EN 364)

(SABS EN 372)

(SABS EN 381-2)

(SABS EN 402)

SANS 50403:2007/EN 403:2004, IDT, Ed. 2 (SABS EN 403)

(SABS EN 405)

(SABS EN 413-2)

Page 253

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 50471:2006/EN 471:2003, IDT, Ed. 2

1

High-visibility warning clothing for professional use Test methods and requirements

SANS 50545:2003/EN 545:2002, IDT, Ed. 2

2

Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods

SANS 50564:1997/EN 564:1997, IDT, Ed. 2 (SABS EN 564)

1

Mountaineering equipment - Accessory cord - Safety requirements and test methods

SANS 50565:2008/EN 565:2006, IDT, Ed. 2

2

Mountaineering equipment - Tape - Safety requirements and test methods

SANS 50566:1997/EN 566:1997, IDT, Ed. 2 (SABS EN 566)

1

Mountaineering equipment - Slings - Safety requirements and test methods

SANS 50567:1997/EN 567:1997, IDT, Ed. 2

1

Mountaineering equipment - Rope clamps - Safety requirements and test methods

SANS 50572-1:2006/EN 572-1:2004, IDT, Ed. 2 (SABS EN 572-1)

2

Glass in building - Basic soda lime silicate glass products Part 1: Definitions and general physical and mechanical properties

SANS 50572-2:2006/EN 572-2:2004, IDT, Ed. 2

2

Glass in building - Basic soda lime silicate glass products Part 2: Float glass

SANS 50572-3:2006/EN 572-3:2004, IDT, Ed. 2 (SABS EN 572-3)

2

Glass in building - Basic soda lime silicate glass products Part 3: Polished wire glass

SANS 50572-4:2006/EN 572-4:2004, IDT, Ed. 2

2

Glass in building - Basic soda lime silicate glass products Part 4: Drawn sheet glass

SANS 50572-5:2006/EN 572-5:2004, IDT, Ed. 2 (SABS EN 572-5)

2

Glass in building - Basic soda lime silicate glass products Part 5: Patterned glass

SANS 50575:1995/EN 575:1995, IDT, Ed. 1

1

Aluminium and aluminium alloys - Master alloys produced by melting - Specifications

SANS 50576:2008/EN 576:2003, IDT, Ed. 2 (SABS EN 576)

2

Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications

SANS 50578:1993/EN 578:1993, IDT, Ed. 1

1

Plastics piping systems - Plastics pipes and fittings Determination of the opacity

SANS 50582:1993/EN 582:1993, IDT (SABS EN 582)

1

Thermal spraying - Determination of tensile adhesive strength

SANS 50598:1994/EN 598:1994, IDT, Ed. 1

1

Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods

SANS 50601:2008/EN 601:2004, IDT, Ed. 2 (SABS EN 601)

2

Aluminium and aluminium alloys - Castings Chemical composition of castings for use in contact with food

SANS 50657:2009/EN 657:2005, IDT, Ed. 2

2

Thermal spraying - Terminology, classification

SANS 50681-1:1996/EN 681-1:1996, IDT, Ed. 2 (SABS EN 681-1)

1

Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber

SANS 50712:1993/EN 712:1993, IDT, Ed. 1

1

Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force

(SABS EN 545)

(SABS EN 565)

(SABS EN 567)

(SABS EN 572-2)

(SABS EN 572-4)

(SABS EN 575)

(SABS EN 578)

(SABS EN 598)

(SABS EN 657)

(SABS EN 712)

Page 254

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 50713:1993/EN 713:1993, IDT, Ed. 1 (SABS EN 713)

1

Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending

SANS 50730-1:2004/EN 730-1:2002, IDT, Ed. 1

1

Gas welding equipment - Safety devices Part 1: Incorporating a flame (flashback) arrestor

SANS 50743:1994/EN 743:1994, IDT, Ed. 1

1

Plastics piping and ducting systems Thermoplastics pipes - Determination of the longitudinal reversion

SANS 50755-2:2005/EN 755-2:1997, IDT, Ed. 1

1

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles Part 2: Mechanical properties

SANS 50755-7:2005/EN 755-7:1998, IDT, Ed. 1

1

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles Part 7: Seamless tubes, tolerances on dimensions and form

SANS 50771-4:2007/EN 771-4:2003, IDT, Ed. 2

1

Specification for masonry units Part 4: Autoclaved aerated concrete masonry units

SANS 50795:1996/EN 795:1996, IDT, Ed. 1

1

Protection against falls from a height - Anchor devices - Requirements and testing

SANS 50813:1997/EN 813:1997, IDT, Ed. 1 (SABS EN 813)

1

Personal protective equipment for prevention of falls from a height - Sit harnesses

SANS 50818-4:2007/EN 818-4:1996, IDT, Ed. 1

1

Short link chain for lifting purposes - Safety Part 4: Chain slings - Grade 8

SANS 50818-6:2000/EN 818-6:2000, IDT, Ed. 1 (SABS EN 818-6)

1

Short link chain for lifting purposes - Safety Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer

SANS 50858-1:2002/EN 858-1:2002, IDT, Ed. 1

1

Separator systems for light liquids (e.g. oil and petrol) Part 1: Principles of product design, performance and testing, marking and quality control

SANS 50858-2:2003/EN 858-2:2003, IDT, Ed. 1

1

Separator systems for light liquids (e.g. oil and petrol) Part 2: Selection of nominal size, installation, operation and maintenance

SANS 50868-2:2003/EN 868-2:1999, IDT, Ed. 1

1

Packaging materials and systems for medical devices which are to be sterilized Part 2: Sterilization wrap - Requirements and test methods

SANS 50868-3:2003/EN 868-3:1999, IDT, Ed. 1

1

Packaging materials and systems for medical devices which are to be sterilized Part 3: Paper for use in the manufacture of paper bags (specified in SANS 50868-4/EN 868-4) and in the manufacture of pouches and reels (specified in SANS 50868-5/EN 868-5) - Requirements and test methods

SANS 50868-4:2003/EN 868-4:1999, IDT, Ed. 1

1

Packaging materials and systems for medical devices which are to be sterilized Part 4: Paper bags - Requirements and test methods

SANS 50868-5:2003/EN 868-5:1999, IDT, Ed. 1

1

Packaging materials and systems for medical devices which are to be sterilized Part 5: Heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods

SANS 50868-6:2003/EN 868-6:1999, IDT, Ed. 1

1

Packaging materials and systems for medical devices which are to be sterilized Part 6: Paper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation Requirements and test methods

(SABS EN 743)

(SABS EN 795)

(SABS EN 858-1)

Page 255

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 50868-7:2003/EN 868-7:1999, IDT, Ed. 1

1

Packaging materials and systems for medical devices which are to be sterilized Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods

SANS 50868-8:2003/EN 868-8:1999, IDT, Ed. 1

1

Packaging materials and systems for medical devices which are to be sterilized Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods

SANS 50868-9:2003/EN 868-9:2000, IDT, Ed. 1

1

Packaging materials and systems for medical devices which are to be sterilized Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods

SANS 50868-10:2003/EN 868-10:2000, IDT, Ed. 1

1

Packaging materials and systems for medical devices which are to be sterilized Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods

SANS 50878:2008/EN 878:2004, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Aluminium sulfate

SANS 50881:2007/EN 881:2004, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric)

SANS 50882:2008/EN 882:2004, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Sodium aluminate

SANS 50883:2007/EN 883:2004, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate

SANS 50885:2007/EN 885:2004, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Poyaluminium chloride hydroxide silicate

SANS 50886:2007/EN 886:2004, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Poyaluminium hydroxide silicate sulfate

SANS 50887:2008/EN 887:2004, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Aluminium iron (III) sulfate

SANS 50888:2008/EN 888:2004, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Iron (III) chloride

SANS 50889:2008/EN 889:2004, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Iron (II) sulfate

SANS 50890:2008/EN 890:2004, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate liquid

SANS 50891:2008/EN 891:2004, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Iron (III) chloride sulfate

SANS 50892:2007/EN 892:2004, IDT, Ed. 2 (SABS EN 892)

2

Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods

Page 256

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 50896:2007/EN 896:2005, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Sodium hydroxide

SANS 50897:2007/EN 897:2005, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Sodium carbonate

SANS 50898:2007/EN 898:2005, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Sodium hydrogen carbonate

SANS 50899:2008/EN 899:2003, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Sulfuric acid

SANS 50901:1999/EN 901:1999, IDT, Ed. 1 (SABS EN 901)

1

Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite

SANS 50902:1999/EN 902:1999, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Hydrogen peroxide

SANS 50935:2008/EN 935:2004, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Aluminium iron (lll) chloride (monomeric) and aluminium iron (lll) chloride hydroxide (monomeric)

SANS 50936:2008/EN 936:2006, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Carbon dioxide

SANS 50937:2007/EN 937:1999, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Chlorine

SANS 50938:1999/EN 938:1999, IDT, Ed. 1 (SABS EN 938)

1

Chemicals used for treatment of water intended for human consumption - Sodium chlorite

SANS 50994:2003/EN 994:1995, IDT, Ed. 1

1

Textile floor coverings - Determination of the side length, squareness and straightness of tiles

SANS 51004:2009/EN 1004:2004, IDT, Ed. 1

1

Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements

SANS 51008:2006/EN 1008:2002, IDT, Ed. 1

1

Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete

SANS 51021-1:2006/EN 1021-1:2006, IDT, Ed. 2 (SABS EN 1021-1)

2

Furniture - Assessment of the ignitability of upholstered furniture Part 1: Ignition source smouldering cigarette

SANS 51021-2:2006/EN 1021-2:2006, IDT, Ed. 2

2

Furniture - Assessment of the ignitability of upholstered furniture Part 2: Ignition source match flame equivalent

SANS 51075:1999/EN 1075:1999, IDT, Ed. 1 (SABS EN 1075)

1

Timber structures - Test methods - Joints made with punched metal plate fasteners

SANS 51124-1:2008/EN 1124-1:1999, IDT, Ed. 1

1

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 1: Requirements, testing, quality control

SANS 51124-2:2008/EN 1124-2:2007, IDT, Ed. 2

1

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 2: System S - Dimensions

SANS 51124-3:2008/EN 1124-3:1999, IDT, Ed. 1

1

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 3: System X - Dimensions

(SABS EN 902)

(SABS EN 1021-2)

Page 257

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 51124-4:2008/EN 1124-4:2005, IDT, Ed. 1

1

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 4: Components for vacuum drainage systems and for drainage systems on ships

SANS 51146:2006/EN 1146:2005, IDT, Ed. 2 (SABS EN 1146)

2

Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking

SANS 51209:2007/EN 1209:2003, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Sodium silicate

SANS 51274:2009/EN 1274:2004, IDT, Ed. 2 (SABS EN 1274)

2

Thermal spraying - Powders - Composition, technical supply conditions

SANS 51276:2006/EN 1276:1997, IDT, Ed. 1

1

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (phase 2, step 1)

SANS 51278:2008/EN 1278:1998, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Ozone

SANS 51302:2007/EN 1302:1999, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods

SANS 51317-1:2009/EN 1317-1:1998, IDT, Ed. 1

1

Road restraint systems Part 1: Terminology and general criteria for test methods

SANS 51317-2:2009/EN 1317-2:1998, IDT, Ed. 1

1

Road restraint systems Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers

SANS 51395:1996/EN 1395:1996, IDT (SABS EN 1395)

1

Thermal spraying - Acceptance inspection of thermal spraying equipment

SANS 51395-1:2009/EN 1395-1:2007, IDT, Ed. 1

1

Thermal spraying - Acceptance inspection of thermal spraying equipment Part 1: General requirements

SANS 51395-2:2009/EN 1395-2:2007, IDT, Ed. 1

1

Thermal spraying - Acceptance inspection of thermal spraying equipment Part 2: Flame spraying including HVOF

SANS 51395-3:2009/EN 1395-3:2007, IDT, Ed. 1

1

Thermal spraying - Acceptance inspection of thermal spraying equipment Part 3: Arc spraying

SANS 51395-4:2009/EN 1395-4:2007, IDT, Ed. 1

1

Thermal spraying - Acceptance inspection of thermal spraying equipment Part 4: Plasma spraying

SANS 51395-5:2009/EN 1395-5:2007, IDT, Ed. 1

1

Thermal spraying - Acceptance inspection of thermal spraying equipment Part 5: Plasma spraying in chambers

SANS 51395-6:2009/EN 1395-6:2007, IDT, Ed. 1

1

Thermal spraying - Acceptance inspection of thermal spraying equipment Part 6: Manipulator systems

SANS 51395-7:2009/EN 1395-7:2007, IDT, Ed. 1

1

Thermal spraying - Acceptance inspection of thermal spraying equipment Part 7: Powder feed systems

SANS 51407:2007/EN 1407:1998, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides

Page 258

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 51409:2007/EN 1409:1998, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Polyamines

SANS 51410:2007/EN 1410:1998, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides

SANS 51423:1997/EN 1423:1997, IDT (SABS EN 1423)

1

Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two

SANS 51424:1997/EN 1424:1997, IDT, Ed. 1

1

Road marking materials - Premix glass beads

SANS 51600:1997/EN 1600:1997, IDT, Ed. 1 (SABS EN 1600)

1

Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification

SANS 51616:1997/EN 1616:1997, IDT, Ed. 1

1

Sterile urethral catheters for single use

SANS 51650:2006/EN 1650:1997, IDT, Ed. 1

1

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (phase 2, step 1)

SANS 51676:1996/EN 1676:1996, IDT, Ed. 1

1

Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications

SANS 51706:1998/EN 1706:1998, IDT, Ed. 1 (SABS EN 1706)

1

Aluminium and aluminium alloys - Castings Chemical composition and mechanical properties

SANS 51714:2005/EN 1714:1997, IDT, Ed. 1

1

Non-destructive testing of welds - Ultrasonic testing of welded joints

SANS 51780-1:2008/EN 1780-1:2002, IDT, Ed. 2 (SABS EN 1780-1)

2

Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings Part 1: Numerical designation system

SANS 51780-2:2008/EN 1780-2:2002, IDT, Ed. 2

2

Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings Part 2: Chemical symbol based designation system

2

Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings Part 3: Writing rules for chemical composition

SANS 51808:1999/EN 1808:1999, IDT, Ed. 1 (SABS EN 1808)

1

Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests

SANS 51827:2004/EN 1827:1999, IDT, Ed. 1

1

Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking

SANS 51835:2004/EN 1835:1999, IDT, Ed. 1

1

Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood Requirements, testing, marking

SANS 51891:1998/EN 1891:1998, IDT, Ed. 1

1

Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes

(SABS EN 1424)

(SABS EN 1616)

(SABS EN 1676)

(SABS EN 1780-2)

SANS 51780-3:2008/EN 1780-3:2002, IDT, Ed. 2 (SABS EN 1780-3)

(SABS EN 1891)

Page 259

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 52094-1:2009/EN 12094-1:2003, IDT, Ed. 1

1

Fixed firefighting systems - Components for gas extinguishing systems Part 1: Requirements and test methods for electrical automatic control and delay devices

SANS 52094-2:2009/EN 12094-2:2003, IDT, Ed. 1

1

Fixed firefighting systems - Components for gas extinguishing systems Part 2: Requirements and test methods for non-electrical automatic control and delay devices

SANS 52094-3:2009/EN 12094-3:2003, IDT, Ed. 1

1

Fixed firefighting systems - Components for gas extinguishing systems Part 3: Requirements and test methods for manual triggering and stop devices

SANS 52094-4:2009/EN 12094-4:2004, IDT, Ed. 1

1

Fixed firefighting systems - Components for gas extinguishing systems Part 4: Requirements and test methods for container valve assemblies and their actuators

SANS 52122:2007/EN 12122:2005, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Ammonia solution

SANS 52195-2:2007/EN 12195-2:2000, IDT, Ed. 1

1

Load restraint assemblies on road vehicles - Safety Part 2: Web lashing made from man-made fibres

SANS 52195-3:2007/EN 12195-3:2001, IDT, Ed. 1

1

Load restraint assemblies on road vehicles - Safety Part 3: Lashing chains

SANS 52195-4:2007/EN 12195-4:2003, IDT, Ed. 1

1

Load restraint assemblies on road vehicles - Safety Part 4: Lashing steel wire ropes

SANS 52386:2007/EN 12386:2005, IDT, Ed. 2

1

Chemicals used for treatment of water intended for human consumption - Copper sulfate

SANS 52485:2007/EN 12485:2001, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Calcium carbonite, highcalcium lime and half-burnt dolomite - Test methods

SANS 52566-1:2004/EN 12566-1:2000, IDT, Ed. 1

1

Small wastewater treatment systems for up to 50 PT Part 1: Prefabricated septic tanks

SANS 52662:2007/EN 12662:1998, IDT, Ed. 1

1

Liquid petroleum products - Determination of contamination in middle distillates

SANS 52671:2007/EN 12671:2000, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Chlorine dioxide

SANS 52672:2007/EN 12672:2000, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Potassium permanganate

SANS 52825:2009/EN 12825:2001, IDT, Ed. 1

1

Raised access floors

SANS 52842:2007/EN 12842:2000, IDT, Ed. 1

1

Ductile iron fittings for PVC-U or PE piping systems Requirements and test methods

SANS 52876:2008/EN 12876:2000, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Oxygen

SANS 52896:2008/EN 12896:2006, IDT, Ed. 1

1

Road transport and traffic telematics - Public transport - Reference data model

SANS 52901:2007/EN 12901:1999, IDT, Ed. 1

1

Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Definitions

Page 260

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 52902:2007/EN 12902:2004, IDT, Ed. 2

1

Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Methods of test

SANS 52903:2007/EN 12903:2003, IDT, Ed. 2

1

Products used for treatment of water intended for human consumption - Powdered activated carbon

SANS 52904:2007/EN 12904:2005, IDT, Ed. 2

1

Products used for treatment of water intended for human consumption - Silica sand and silica gravel

SANS 52915-1:2008/EN 12915-1:2003, IDT, Ed. 1

1

Products used for the treatment of water intended for human consumption - Granular activated carbon Part 1: Virgin granular activated carbon

SANS 52915-2:2008/EN 12915-2:2003, IDT, Ed. 1

1

Products used for the treatment of water intended for human consumption - Granular activated carbon Part 2: Reactivated granular activated carbon

SANS 52931:2008/EN 12931:2000, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous

SANS 52932:2008/EN 12932:2000, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate

SANS 52933:2008/EN 12933:2000, IDT, Ed. 1

1

Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acid

SANS 53015:2010/EN 13015:2001, IDT, Ed. 1

1

Maintenance for lifts and escalators - Rules for maintenance instructions

SANS 53121-1:2009/EN 13121-1:2003, IDT, Ed. 1

1

GRP tanks and vessels for use above ground Part 1: Raw materials - Specification conditions and acceptance conditions

SANS 53121-2:2009/EN 13121-2:2003, IDT, Ed. 1

1

GRP tanks and vessels for use above ground Part 2: Composite materials - Chemical resistance

SANS 53121-3:2009/EN 13121-3:2008, IDT, Ed. 1

1

GRP tanks and vessels for use above ground Part 3: Design and workmanship

SANS 53121-4:2009/EN 13121-4:2005, IDT, Ed. 1

1

GRP tanks and vessels for use above ground Part 4: Delivery, installation and maintenance

SANS 53138-1:2007/EN 13138-1:2003, IDT, Ed. 1

1

Buoyant aids for swimming instruction Part 1: Safety requirements and test methods for buoyant aids to be worn

SANS 53138-2:2009/EN 13138-2:2007, IDT, Ed. 2

2

Buoyant aids for swimming instruction Part 2: Safety requirements and test methods for buoyant aids to be held

SANS 53138-3:2009/EN 13138-3:2007, IDT, Ed. 2

2

Buoyant aids for swimming instruction Part 3: Safety requirements and test methods for swim seats to be worn

SANS 53149-1:2009/EN 13149-1:2004, IDT, Ed. 1

1

Public transport - Road vehicle scheduling and control systems Part 1: WORLDFIP definition and application rules for onboard data transmission

SANS 53149-2:2009/EN 13149-2:2004, IDT, Ed. 1

1

Public transport - Road vehicle scheduling and control systems Part 2: WORLDFIP cabling specifications

SANS 53149-3:2009/CEN/TS 13149-3:2007, IDT, Ed. 1 1

Public transport - Road vehicle scheduling and control systems Part 3: WorldFIP message content

Page 261

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 53149-4:2009/EN 13149-4:2004, IDT, Ed. 1

1

Public transport - Road vehicle scheduling and control systems Part 4: General application rules for CANopen transmission buses

SANS 53149-5:2009/EN 13149-5:2004, IDT, Ed. 1

1

Public transport - Road vehicle scheduling and control systems Part 5: CANopen cabling specifications

SANS 53149-6:2008/CEN/TS 13149-6:2005, IDT, Ed. 1 1

Public transport - Road vehicle scheduling and control systems Part 6: CAN message content

SANS 53280:2009/EN 13280:2001, IDT, Ed. 1

1

Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water

SANS 53306:2008/EN 13306:2001, IDT, Ed. 1

1

Maintenance terminology

SANS 53372:2009/EN 13372:2004, IDT, Ed. 1

1

Road Transport and Traffic Telmatics (RTTT) Dedicated short-range communication - Profiles for RTTT applications

SANS 53509:2009/EN 13509:2003, IDT, Ed. 1

1

Cathodic protection measurement techniques

SANS 53631-14:2006/EN 13631-14:2003, IDT, Ed. 1

1

Explosives for civil uses - High explosives Part 14: Determination of velocity of detonation

SANS 53704:2006/EN 13704:2002, IDT, Ed. 1

1

Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic, and institutional areas - Test method and requirements (phase 2, step 1)

SANS 53754:2008/EN 13754:2003, IDT, Ed. 1

1

Products used for treatment of water intended for human consumption - Bentonite

SANS 53763-1:2008/EN 13763-1:2004, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 1: Requirements

SANS 53763-2:2008/EN 13763-2:2002, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 2: Determination of thermal stability

SANS 53763-3:2008/EN 13763-3:2002, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 3: Determination of sensitiveness to impact

SANS 53763-4:2008/EN 13763-4:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 4: Determination of resistance to abrasion of leading wires and shock tubes

SANS 53763-5:2008/EN 13763-5:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 5: Determination of resistance to cutting damage of leading wires and shock tubes

SANS 53763-6:2008/EN 13763-6:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 6: Determination of resistance to cracking in low temperatures of leading wires

SANS 53763-7:2008/EN 13763-7:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures

SANS 53763-8:2008/EN 13763-8:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 8: Determination of the resistance to vibration of plain detonators

Page 262

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 53763-11:2008/EN 13763-11:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 11: Determination of resistance to damage by dropping of detonators and relays

SANS 53763-12:2006/EN 13763-12:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 12: Determination of resistance to hydrostatic pressure

SANS 53763-13:2006/EN 13763-13:2004, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 13: Determination of resistance of electric detonators to electrostatic discharge

SANS 53763-15:2008/EN 13763-15:2004, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 15: Determination of equivalent initiating capability

SANS 53763-16:2006/EN 13763-16:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 16: Determination of delay accuracy

SANS 53763-17:2006/EN 13763-17:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 17: Determination of no-fire current of electric detonators

SANS 53763-18:2006/EN 13763-18:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 18: Determination of series firing current of electric detonators

SANS 53763-19:2008/EN 13763-19:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 19: Determination of firing impulse of electric detonators

SANS 53763-20:2006/EN 13763-20:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 20: Determination of total electrical resistance of electric detonators

SANS 53763-21:2008/EN 13763-21:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 21: Determination of flash-over voltage of electric detonators

SANS 53763-24:2008/EN 13763-24:2002, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 24: Determination of the electrical non-conductivity of shock tube

SANS 53763-26:2008/EN 13763-26:2004, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 26: Definitions, methods and requirements for devices and accessories for reliable and safe function of detonators and relays

SANS 53763-27:2008/CEN/TS 13763-27:2003, IDT, Ed. 1

1

Explosives for civil uses - Detonators and relays Part 27: Definitions, methods and requirements for electronic initiation systems

SANS 53794:2007/EN 13794:2002, IDT, Ed. 1

1

Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape Requirements, testing, marking

SANS 53811:2006/EN 13811:2003, IDT, Ed. 1

1

Sherardizing - Zinc diffusion coatings on ferrous products - Specification

SANS 53857-1:2008/EN 13857-1:2003, IDT, Ed. 1

1

Explosives for civil uses Part 1: Terminology

SANS 53923:2009/EN 53923:2005, IDT, Ed. 1

1

Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing

SANS 53998:2008/ENV 13998:2001, IDT, Ed. 1

1

Road transport and traffic telematics - Public transport - Non-interactive dynamic passenger information on ground

SANS 54103:2007/EN 14103:2003, IDT, Ed. 1

1

Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents

Page 263

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 54104:2007/EN 14104:2003, IDT, Ed. 1

1

Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of acid value

SANS 54105:2007/EN 14105:2003, IDT, Ed. 1

1

Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride content (Reference method)

SANS 54106:2007/EN 14106:2003, IDT, Ed. 1

1

Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free glycerol content

SANS 54107:2007/EN 14107:2003, IDT, Ed. 1

1

Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry

SANS 54108:2007/EN 14108:2003, IDT, Ed. 1

1

Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry

SANS 54109:2007/EN 14109:2003, IDT, Ed. 1

1

Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of potassium content by atomic absorption spectrometry

SANS 54110:2007/EN 14110:2003, IDT, Ed. 1

1

Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of methanol content

SANS 54111:2007/EN 14111:2003, IDT, Ed. 1

1

Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value

SANS 54112:2007/EN 14112:2003, IDT, Ed. 1

1

Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test)

SANS 54387:2007/EN 14387:2004, IDT, Ed. 1

1

Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking

SANS 54511-1:2010/EN 14511-1:2007, IDT, Ed. 2

1

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 1: Terms and definitions

SANS 54511-2:2010/EN 14511-2:2007, IDT, Ed. 2

1

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 2: Test conditions

SANS 54511-3:2010/EN 14511-3:2007, IDT, Ed. 2

1

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 3: Test methods

SANS 54511-4:2010/EN 14511-4:2007, IDT, Ed. 2

1

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 4: Requirements

SANS 54593-1:2006/EN 14593-1:2005, IDT, Ed. 1

1

Respiratory protective devices - Compressed air line breathing apparatus with demand valve Part 1: Apparatus with a full face mask - Requirements, testing, marking

SANS 54593-2:2006/EN 14593-2:2005, IDT, Ed. 1

1

Respiratory protective devices - Compressed air line breathing apparatus with demand valve Part 2: Apparatus with a half mask at positive pressure Requirements, testing, marking

SANS 54594:2006/EN 14594:2005, IDT, Ed. 1

1

Respiratory protective devices - Continuous flow compressed air line breathing apparatus Requirements, testing, marking

Page 264

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 54821-1:2008/CEN/TS 14821-1:2003, IDT, Ed. 1 1

Traffic and Travel Information (TTI) - TTI messages via cellular networks Part 1: General specifications

SANS 54821-2:2008/CEN/TS 14821-2:2003, IDT, Ed. 1 1

Traffic and Travel Information (TTI) - TTI messages via cellular networks Part 2: Numbering and ADP message header

SANS 54821-3:2008/CEN/TS 14821-3:2003, IDT, Ed. 1 1

Traffic and Travel Information (TTI) - TTI messages via cellular networks Part 3: Basic information elements

SANS 54821-4:2008/CEN/TS 14821-4:2003, IDT, Ed. 1 1

Traffic and Travel Information (TTI) - TTI messages via cellular networks Part 4: Service-independent protocols

SANS 54821-5:2008/CEN/TS 14821-5:2003, IDT, Ed. 1 1

Traffic and Travel Information (TTI) - TTI messages via cellular networks Part 5: Internal services

SANS 54821-6:2008/CEN/TS 14821-6:2003, IDT, Ed. 1 1

Traffic and Travel Information (TTI) - TTI messages via cellular networks Part 6: External services

SANS 54821-7:2008/CEN/TS 14821-7:2003, IDT, Ed. 1 1

Traffic and Travel Information (TTI) - TTI messages via cellular networks Part 7: Performance requirements for onboard positioning

SANS 54821-8:2008/CEN/TS 14821-8:2003, IDT, Ed. 1 1

Traffic and Travel Information (TTI) - TTI messages via cellular networks Part 8: GSM-specific parameters

SANS 55504:2009/CEN/TS 15504:2007, IDT, Ed. 1

1

Public transport - Road vehicles - Visible variable passenger information devices inside the vehicle

SANS 55509:2009/EN 15509:2007, IDT, Ed. 1

1

Road transport and traffic telematics - Electronic fee collection - Interoperability application profile for DSRC

SANS 55531-1:2008/CEN/TS 15531-1:2007, IDT, Ed. 1 1

Public transport - Service interface for real-time information relating to public transport operations Part 1: Context and framework

SANS 55531-2:2008/CEN/TS 15531-2:2007, IDT, Ed. 1 1

Public transport - Service interface for real-time information relating to public transport operations Part 2: Communications infrastructure

SANS 55531-3:2008/CEN/TS 15531-3:2007, IDT, Ed. 1 1

Public transport - Service interface for real-time information relating to public transport operations Part 3: Functional service interfaces

SANS 60034-1:2006/IEC 60034-1:2004, IDT, Ed. 11

3

Rotating electrical machines Part 1: Rating and performance

SANS 60034-2:1972/IEC 60034-2:1972, IDT, Ed. 3 (SABS IEC 60034-2)

1

Rotating electrical machines Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)

SANS 60034-2-1:2008/IEC 60034-2-1:2007, IDT, Ed. 1 1 SANS 60034-2A:1974/IEC 60034-2A:1974, IDT, Ed. 1 (SABS IEC 60034-2A)

1

Rotating electrical machines Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) Rotating electrical machines Part 2A: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) First supplement: Measurement of losses by the calorimetric method

Page 265

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60034-3:2008/IEC 60034-3:2007, IDT, Ed. 6 (SABS IEC 60034-3)

3

Rotating electrical machines Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines

SANS 60034-4:2009/IEC 60034-4:2008, IDT, Ed. 3

2

Rotating electrical machines Part 4: Methods for determining synchronous machine quantities from tests

SANS 60034-5:2007/IEC 60034-5:2006, IDT, Ed. 4.1 (SABS IEC 60034-5)

2.01

Rotating electrical machines Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

SANS 60034-6:1991/IEC 60034-6:1991, IDT, Ed. 2

1

Rotating electrical machines Part 6: Methods of cooling (IC Code)

SANS 60034-7:2001/IEC 60034-7:2001, IDT, Ed. 2.1 (SABS IEC 60034-7)

1.01

Rotating electrical machines Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)

SANS 60034-8:2007/IEC 60034-8:2007, IDT, Ed. 3

3

Rotating electrical machines Part 8: Terminal markings and direction of rotation

3.01

Rotating electrical machines Part 9: Noise limits

(SABS IEC 60034-4)

(SABS IEC 60034-6)

(SABS IEC 60034-8) SANS 60034-9:2007/IEC 60034-9:2007, IDT, Ed. 4.1 (SABS IEC 60034-9)

SANS 60034-11:2005/IEC 60034-11:2004, IDT, Ed. 2 2 (SABS IEC 60034-11)

Rotating electrical machines Part 11: Thermal protection

SANS 60034-12:2008/IEC 60034-12:2007, IDT, Ed. 2.1 (SABS IEC 60034-12)

2.01

Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors

SANS 60034-14:2007/IEC 60034-14:2007, IDT, Ed. 3.1 (SABS IEC 60034-14)

3.01

Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

SANS 60034-15:2009/IEC 60034-15:2009, IDT, Ed. 3 3 (SABS IEC 60034-15)

Rotating electrical machines Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

SANS 60034-16-1:1991/IEC 60034-16-1:1991, IDT, Ed. 1 (SABS IEC 60034-16-1)

1

Rotating electrical machines Part 16: Excitation systems for synchronous machines Chapter 1: Definitions

SANS 60034-16-2:1991/IEC 60034-16-2:1991, IDT, Ed. 1 (SABS IEC 60034-16-2)

1

Rotating electrical machines Part 16: Excitation systems for synchronous machines Chapter 2: Models for power system studies

SANS 60034-16-3:1996/IEC 60034-16-3:1996, IDT, Ed. 1 (SABS IEC 60034-16-3)

1

Rotating electrical machines Part 16: Excitation systems for synchronous machines Section 3: Dynamic performance

SANS 60034-17:2006/IEC TS 60034-17:2006, IDT, Ed. 4 (SABS IEC 60034-17)

4

Rotating electrical machines Part 17: Cage induction motors when fed from converters - Application guide

SANS 60034-18-1:1992/IEC 60034-18-1:1992, IDT, Ed. 1 (SABS IEC 60034-18-1)

1

Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 1: General guidelines

SANS 60034-18-21:1992/IEC 60034-18-21:1992, IDT, Ed. 1 (SABS IEC 60034-18-21)

1

Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 21: Test procedures for wire-wound windings - Thermal evaluation and classification

Page 266

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60034-18-22:2000/IEC 60034-18-22:2000, IDT, Ed. 2 (SABS IEC 60034-18-22)

2

Rotating electrical machines Part 18-22: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions

SANS 60034-18-31:1992/IEC 60034-18-31:1992, IDT, Ed. 1 (SABS IEC 60034-18-31)

1

Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 31: Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 kV

SANS 60034-18-32:1995/IEC 60034-18-32:1995, IDT, Ed. 1 (SABS IEC 60034-18-32)

1

Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 32: Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV

SANS 60034-18-33:1995/IEC 60034-18-33:1995, IDT, Ed. 1 (SABS IEC 60034-18-33)

1

Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 33: Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA and 15 kV

SANS 60034-18-34:2006/IEC 60034-18-34:2000, IDT, Ed. 1

1

Rotating electrical machines Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems

SANS 60034-18-41:2009/IEC/TS 60034-18-41:2006, IDT, Ed. 1

1

Rotating electrical machines Part 18-41: Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters

SANS 60034-18-42:2009/IEC/TS 60034-18-42:2008, IDT, Ed. 1

1

Rotating electrical machines Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters

SANS 60034-19:1995/IEC 60034-19:1995, IDT, Ed. 1 1 (SABS IEC 60034-19)

Rotating electrical machines Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies

SANS 60034-22:1996/IEC 60034-22:1996, IDT, Ed. 1 1

Rotating electrical machines Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets

(SABS IEC 60034-22) SANS 60034-23:2003/IEC TS 60034-23:2003, IDT, Ed. 1

1

Rotating electrical machines Part 23: Specification for the refurbishing of rotating electrical machines

SANS 60034-25:2007/IEC TS 60034-25:2007, IDT, Ed. 2

2

Rotating electrical machines Part 25: Guide for the design and performance of a.c motors specifically designed for converter supply

SANS 60034-26:2006/IEC 60034-26:2006, IDT, Ed. 1 2

Rotating electrical machines Part 26: Effects of unbalanced voltages on the performance of threephase cage induction motors

SANS 60034-27:2007/IEC TS 60034-27:2006, IDT, Ed. 1

Rotating electrical machines Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines

1

SANS 60034-28:2007/IEC 60034-28:2007, IDT, Ed. 1 1

Rotating electrical machines Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

Page 267

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60034-29:2008/IEC 60034-29:2008, IDT, Ed. 1 1

Rotating electrical machines Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

SANS 60034-30:2009/IEC 60034-30:2008, IDT, Ed. 1 1

Rotating electrical machines Part 30: Efficiency classes of single-speed, three-phase, cageinduction motors (IE-code)

SANS 60044-1:2003/IEC 60044-1:2003, IDT, Ed. 1.2 (SABS IEC 60044-1)

1.02

Instrument transformers Part 1: Current transformers

SANS 60044-2:2003/IEC 60044-2:2003, IDT, Ed. 1.2

1.02

Instrument transformers Part 2: Inductive voltage transformers

SANS 60044-3:2004/IEC 60044-3:2002, IDT, Ed. 2

1

Instrument transformers Part 3: Combined transformers

SANS 60044-5:2005/IEC 60044-5:2004, IDT, Ed. 1

1

Instrument transformers Part 5: Capacitor voltage transformers

SANS 60044-6:2004/IEC 60044-6:1992, IDT, Ed. 1

1

Instrument transformers Part 6: Requirements for protective current transformers for transient performance

SANS 60044-7:1999/IEC 60044-7:1999, IDT, Ed. 1

1

Instrument transformers Part 7: Electronic voltage transformers

1

Instrument transformers Part 8: Electronic current transformers

SANS 60050-441:1984/IEC 60050441:1984, IDT, Ed. 1 2 (SABS IEC 60050-441)

International electrotechnical vocabulary Chapter 441: Switchgear, controlgear and fuses

SANS 60060-1:1989/IEC 60060-1:1989, IDT, Ed. 2 (SABS IEC 60060-1)

1

High-voltage test techniques Part 1: General definitions and test requirements

SANS 60060-2:1994/IEC 60060-2:1994, IDT, Ed. 2

1

High-voltage test techniques Part 2: Measuring systems

SANS 60060-3:2006/IEC 60060-3:2006, IDT, Ed. 1

1

High-voltage test techniques Part 3: Definitions and requirements for on-site testing

SANS 60064:2007/IEC 60064:2007, IDT, Ed. 6.4

1.04

Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

SANS 60065:2008/IEC 60065:2005, IDT, Ed. 7.1 (SABS IEC 60065)

3.01

Audio, video and similar electronic apparatus Safety requirements

SANS 60072-1:1991/IEC 60072-1:1991, IDT, Ed. 6

1

Dimensions and output series for rotating electrical machines Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080

SANS 60072-2:1990/IEC 60072-2:1990, IDT, Ed. 1 (SABS IEC 60072-2)

1

Dimensions and output series for rotating electrical machines Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360

SANS 60072-3:1994/IEC 60072-3:1994, IDT, Ed. 1

1

Dimensions and output series for rotating electrical machines Part 3: Small built-in motors - Flange numbers BF10 to BF50

SANS 60076-1:2008/IEC 60076-1:2000, IDT, Ed. 2.1 (SABS IEC 60076-1)

1.01

Power transformers Part 1: General

SANS 60076-2:1993/IEC 60076-2:1993, IDT, Ed. 2

1

Power transformers Part 2: Temperature rise

(SABS IEC 60044-2)

(SABS IEC 60044-7) SANS 60044-8:2004/IEC 60044-8:2002, IDT, Ed. 1

(SABS IEC 60060-2)

(SABS IEC 60072-1)

(SABS IEC 60072-3)

(SABS IEC 60076-2)

Page 268

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60076-3:2000/IEC 60076-3:2000, IDT, Ed. 2 (SABS IEC 60076-3)

2

Power transformers Part 3: Insulation levels, dielectric tests and external clearances in air

SANS 60076-4:2004/IEC 60076-4:2002, IDT, Ed. 1

1

Power transformers Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors

SANS 60076-5:2006/IEC 60076-5:2006, IDT, Ed. 3 (SABS IEC 60076-5)

3

Power transformers Part 5: Ability to withstand short circuit

SANS 60076-6:2008/IEC 60076-6:2007, IDT, Ed. 1

1

Power transformers Part 6: Reactors

SANS 60076-7:2006/IEC 60076-7:2005, IDT, Ed. 1

1

Power transformers Part 7: Loading guide for oilimmersed power transformers

SANS 60076-8:1997/IEC 60076-8:1997, IDT, Ed. 1

1

Power transformers - Application guide

(SABS IEC 60076-8) SANS 60076-10:2001/IEC 60076-10:2001, IDT, Ed. 1 1 (SABS IEC 60076-10)

Power transformers Part 10: Determination of sound levels

SANS 60076-10-1:2008/IEC 60076-10-1:2005, IDT, Ed. 1

Power transformers Part 10-1: Determination of sound levels - Application guide

1

SANS 60076-11:2005/IEC 60076-11:2004, IDT, Ed. 1 1

Power transformers Part 11: Dry-type transformers

SANS 60076-12:2009/IEC 60076-12:2008, IDT, Ed. 1 1

Power transformers Part 12: Loading guide for drytype power transformers

SANS 60076-13:2006/IEC 60076-13:2006, IDT, Ed. 1 1

Power transformers Part 13: Self-protected liquidfilled transformers

SANS 60076-14:2009/IEC/TS 60076-14:2009, IDT, Ed. 2

Power transformers Part 14: Design and application of liquid-immersed power transformers using hightemperature insulation materials

2

SANS 60076-15:2008/IEC 60076-15:2008, IDT, Ed. 1 1

Power transformers Part 15: Gas-filled power transformers

SANS 60079-0:2009/IEC 60079-0:2007, IDT, Ed. 5 (SABS IEC 60079-0)

4

Explosive atmospheres Part 0: Equipment - General requirements

SANS 60079-1:2009/IEC 60079-1:2007, IDT, Ed. 6

4

Explosive atmospheres Part 1: Equipment protection by flameproof enclosures "d"

(SABS IEC 60079-1) SANS 60079-1-1:2004/IEC 60079-1-1:2002, IDT, Ed. 1 1

Electrical apparatus for explosive gas atmospheres Part 1: Flameproof enclosures "d" - Method of test for ascertainment of maximum experimental safe gap

SANS 60079-2:2007/IEC 60079-2:2007, IDT, Ed. 5

3

Explosive atmospheres Part 2: Equipment protection by pressurized enclosures

SANS 60079-4:1975/IEC 60079-4:1975, IDT, Ed. 2 (SABS IEC 60079-4)

1

Electrical apparatus for explosive gas atmospheres Part 4: Method of test for ignition temperature

SANS 60079-5:2009/IEC 60079-5:2007, IDT, Ed. 3

3

Explosive atmospheres Part 5: Equipment protection by powder filling "q"

3

Explosive atmospheres Part 6: Equipment protection by oil-immersion "o"

(SABS IEC 60079-2)

(SABS IEC 60079-5) SANS 60079-6:2009/IEC 60079-6:2007, IDT, Ed. 3 (SABS IEC 60079-6)

Page 269

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60079-7:2007/IEC 60079-7:2006, IDT, Ed. 4 (SABS IEC 60079-7)

3

Explosive atmospheres Part 7: Equipment protection by increased safety "e"

SANS 60079-10-2:2009/IEC 60079-10-2:2009, IDT, Ed. 1

1

Explosive atmospheres Part 10-2: Classification of areas - Combustible dust atmospheres

SANS 60079-10:2005/IEC 60079-10:2002, IDT, Ed. 4 3 (SABS IEC 60079-10)

Electrical apparatus for explosive gas atmospheres Part 10: Classification of hazardous areas

SANS 60079-11:2007/IEC 60079-11:2006, IDT, Ed. 5 3

Explosive atmospheres Part 11: Equipment protection by intrinsic safety "i"

(SABS IEC 60079-11) SANS 60079-12:1978/IEC 60079-12:1978, IDT, Ed. 1 1 (SABS IEC 60079-12)

Electrical apparatus for explosive gas atmospheres Part 12: Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents

SANS 60079-13:1982/IEC 60079-13:1982, IDT, Ed. 1 1 (SABS IEC 60079-13)

Electrical apparatus for explosive gas atmospheres Part 13: Construction and use of rooms or buildings protected by pressurization

SANS 60079-14:2009/IEC 60079-14:2007, IDT, Ed. 4 4 (SABS IEC 60079-14)

Explosive atmospheres Part 14: Electrical installations design, selection and erection

SANS 60079-15:2006/IEC 60079-15:2005, IDT, Ed. 3 3 (SABS IEC 60079-15)

Electrical apparatus for explosive gas atmospheres Part 15: Construction, test and marking of type of protection "n" electrical apparatus

SANS 60079-16:1990/IEC 60079-16:1990, IDT, Ed. 1 1 (SABS IEC 60079-16)

Electrical apparatus for explosive gas atmospheres Part 16: Artificial ventilation for the protection of analyzer(s) houses

SANS 60079-17:2009/IEC 60079-17:2007, IDT, Ed. 4 4 (SABS IEC 60079-17)

Explosive atmospheres Part 17: Electrical installations inspection and maintenance

SANS 60079-18:2009/IEC 60079-18:2009, IDT, Ed. 3 3 (SABS IEC 60079-18)

Explosive atmospheres Part 18: Equipment protection by encapsulation "m"

SANS 60079-19:2007/IEC 60079-19:2006, IDT, Ed. 2 2

Explosive atmospheres Part 19: Equipment repair, overhaul and reclamation

(SABS IEC 60079-19) SANS 60079-20:1996/IEC 60079-20:1996, IDT, Ed. 1 1 (SABS IEC 60079-20)

Electrical apparatus for explosive gas atmospheres Part 20: Data for flammable gases and vapours relating to the use of electrical apparatus

SANS 60079-25:2003/IEC 60079-25:2003, IDT, Ed. 1 1

Electrical apparatus for explosive gas atmospheres Part 25: Intrinsically safe systems

SANS 60079-26:2007/IEC 60079-26:2006, IDT, Ed. 2 2

Explosive atmospheres Part 26: Equipment with equipment protection level (EPL) Ga

SANS 60079-27:2009/IEC 60079-27:2008, IDT, Ed. 2 2

Explosive atmospheres Part 27: Fieldbus intrinsically safe concept (FISCO)

SANS 60079-28:2009/IEC 60079-28:2006, IDT, Ed. 1 1

Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation

SANS 60079-30-1:2007/IEC 60079-30-1:2007, IDT, Ed. 1

1

Explosive atmospheres Part 30-1: Electrical resistance trace heating - General and testing requirements

SANS 60079-30-2:2007/IEC 60079-30-2:2007, IDT, Ed. 1

1

Explosive atmospheres Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance

Page 270

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60079-31:2009/IEC 60079-31:2008, IDT, Ed. 1 1

Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure "t"

SANS 60081:2006/IEC 60081:2005, IDT, Ed. 5.3

2.03

Double-capped fluorescent lamps - Performance specifications

SANS 60086-1:2007/IEC 60086-1:2006, IDT, Ed. 10 (SABS IEC 60086-1)

4

Primary batteries Part 1: General

SANS 60086-2:2007/IEC 60086-2:2006, IDT, Ed. 11

5

Primary batteries Part 2: Physical and electrical specifications

SANS 60086-3:2005/IEC 60086-3:2004, IDT, Ed. 2 (SABS IEC/ISO 60086-3)

2

Primary batteries Part 3: Watch batteries

SANS 60086-4:2008/IEC 60086-4:2007, IDT, Ed. 3

3

Primary batteries Part 4: Safety of lithium batteries

SANS 60086-5:2005/IEC 60086-5:2005, IDT, Ed. 2 (SABS IEC 60086-5)

2

Primary batteries Part 5: Safety of batteries with aqueous electrolyte

SANS 60095-1:2007/IEC 60095-1:2006, IDT, Ed. 7

3

Lead-acid starter batteries Part 1: General requirements and methods of test

SANS 60095-2:2010/IEC 60095-2:2009, IDT, Ed. 4 (SABS IEC 60095-2)

2

Lead-acid starter batteries Part 2: Dimensions of batteries and dimensions and marking of terminals

SANS 60095-4:2008/IEC 60095-4:2008, IDT, Ed. 2

2

Lead-acid starter batteries Part 4: Dimensions of batteries for heavy vehicles

SANS 60099-1:1999/IEC 60099-1:1999, IDT, Ed. 3.1 (SABS IEC 60099-1)

1.01

Surge arresters Part 1: Non-linear resistor type gapped surge arresters for a.c systems

SANS 60099-4:2009/IEC 60099-4:2009, IDT, Ed. 2.2

2.02

Surge arresters Part 4: Metal-oxide surge arresters without gaps for a.c. systems

SANS 60099-5:2007/IEC 60099-5:2000, IDT, Ed. 1.1 (SABS IEC 60099-5)

1.01

Surge arresters Part 5: Selection and application recommendations

SANS 60099-6:2005/IEC 60099-6:2002, IDT, Ed. 1

1

Surge arresters Part 6: Surge arresters containing both series and parallel gapped structures - Rated 52 kV and less

SANS 60099-7:2005/IEC/PAS 60099-7:2004, IDT, Ed. 1

1

Surge arresters Part 7: Glossary of terms and definitions from IEC publications 60099-1, 60099-4, 60099-6, 61643-1, 61643-12, 61643-21, 61643-311, 61643-321, 61643-331 and 61643-341

SANS 60107-1:1997/IEC 60107-1:1997, IDT, Ed. 3 (SABS IEC 60107-1)

1

Methods of measurement on receivers for television broadcast transmissions Part 1: General considerations - Measurements at radio and video frequencies

SANS 60107-2:1997/IEC 60107-2:1997, IDT, Ed. 2

1

Methods of measurement on receivers for television broadcast transmissions Part 2: Audio channels General methods and methods for monophonic channels

1.01

Recommended methods of measurements on receivers for television broadcast transmissions Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system

(SABS IEC 60081)

(SABS IEC 60086-2)

(SABS IEC 60086-4)

(SABS IEC 60095-1)

(SABS IEC 60095-4)

(SABS IEC 60099-4)

(SABS IEC 60107-2)

SANS 60107-5:1999/IEC 60107-5:1999, IDT, Ed. 1.1 (SABS IEC 60107-5)

Page 271

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60120:1984/IEC 60120:1984, IDT, Ed. 3 (SABS IEC 60120)

1

Dimensions of ball and socket couplings of string insulator units

SANS 60136:1986/IEC 60136:1986, IDT, Ed. 2

1

Dimensions of brushes and brush-holders for electrical machinery

3

Insulated bushings for alternating voltages above 1 000 V

(SABS IEC 60136) SANS 60137:2010/IEC 60137:2008, IDT, Ed. 6 (SABS IEC 60137)

SANS 60146-1-1:1991/IEC 60146-1-1:1991, IDT, Ed. 1 3 (SABS IEC 60146-1-1)

Semiconductor convertors - General requirements and line commutated convertors Part 1-1: Specification of basic requirements

SANS 60146-1-2:1991/IEC 60146-1-2:1991, IDT, Ed. 1 3 (SABS IEC 60146-1-2)

Semiconductor convertors - General requirements and line commutated convertors Part 1-2: Application guide

SANS 60146-1-3:1991/IEC 60146-1-3:1991, IDT, Ed. 1 3 (SABS IEC 60146-1-3)

Semiconductor convertors - General requirements and line commutated convertors Part 1-3: Transformers and reactors

2

Semiconductor converters Part 2: Self-commutated semiconductor converters including direct d.c. converters

SANS 60146-6:1992/IEC 60146-6:1992, IDT, Ed. 1 (SABS IEC 60146-6)

1

Semiconductor convertors Part 6: Application guide for the protection of semiconductor convertors against overcurrent by fuses

SANS 60155:2007/IEC 60155:1993, IDT, Ed. 4

1

Glow-starters for fluorescent lamps

SANS 60168:2001/IEC 60168:2001, IDT, Ed. 4.2 (SABS IEC 60168)

1.02

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 000 V

SANS 60188:2001/IEC 60188:2001, IDT, Ed. 3

1

High-pressure mercury vapour lamps - Performance specifications

SANS 60192:2001/IEC 60192:2001, IDT, Ed. 3 (SABS IEC 60192)

2

Low-pressure sodium vapour lamps - Performance specifications

SANS 60204-1:2009/IEC 60204-1:2009, IDT, Ed. 5.1

3.01

Safety of machinery - Electrical equipment of machines Part 1: General requirements

SANS 60146-2:1999/IEC 60146-2:1999, IDT, Ed. 2 (SABS IEC 60146-2)

(SABS IEC 60188)

(SABS IEC 60204-1) SANS 60204-11:2000/IEC 60204-11:2000, IDT, Ed. 1 1 (SABS IEC 60204-11)

Safety of machinery - Electrical equipment of machines Part 11: Requirements for HV equipment for voltages above 1 000 V a.c or 1 500 V d.c and not exceeding 36 kV

SANS 60204-32:2009/IEC 60204-32:2008, IDT, Ed. 2 1

Safety of machinery - Electrical equipment of machines Part 32: Requirements for hoisting machines

1

Maximum demand indicators, Class l.0

SANS 60227-1:2006/IEC 60227-1:1998, IDT, Ed. 2.2

1.02

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 1: General requirements

SANS 60227-2:2006/IEC 60227-2:2003, IDT, Ed. 2.1

1.01

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 2: Test methods

SANS 60227-5:2006/IEC 60227-5:2003, IDT, Ed. 2.2

1.02

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (cords)

SANS 60211:1966/IEC 60211:1966, IDT, Ed. 1 (SABS IEC 60211)

Page 272

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60238:2009/IEC 60238:2008, IDT, Ed. 8.1 (SABS IEC 60238)

4.01

Edison screw lampholders

SANS 60252-1:2001/IEC 60252-1:2001, IDT, Ed. 1

1

AC motor capacitors Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation

SANS 60252-2:2004/IEC 60252-2:2003, IDT, Ed. 1

1

AC motor capacitors Part 2: Motor start capacitors

SANS 60254-2:2008/IEC 60254-2:2008, IDT, Ed. 4

3

Lead-acid traction batteries Part 2: Dimensions of cells and terminals and marking of polarity on cells

SANS 60265-1:1998/IEC 60265-1:1998, IDT, Ed. 3 (SABS IEC 60265-1)

2

High-voltage switches Part 1: Switches for rated voltages above 1 kV and less than 52 kV

SANS 60265-2:1988/IEC 60265-2:1988, IDT, Ed. 1

1

High-voltage switches Part 2: High-voltage switches for rated voltages of 52 kV and above

SANS 60269-1:2010/IEC 60269-1:2009, IDT, Ed. 4.1 (SABS IEC 60269-1)

3.01

Low-voltage fuses Part 1: General requirements

SANS 60269-2:2007/IEC 60269-2:2006, IDT, Ed. 3

2

Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) Examples of standardized systems of fuses A to I

2

Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F

SANS 60269-4:2009/IEC 60269-4:2009, IDT, Ed. 5 (SABS IEC 60269-4)

3

Low-voltage fuses Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices

SANS 60270:2000/IEC 60270:2000, IDT, Ed. 3

1

High-voltage test techniques - Partial discharge measurements

SANS 60273:1990/IEC 60273:1990, IDT, Ed. 3 (SABS IEC 60273)

1

Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1 000 V

SANS 60282-1:2006/IEC 60282-1:2005, IDT, Ed. 6

3

High-voltage fuses Part 1: Current-limiting fuses

SANS 60282-2:2008/IEC 60282-2:2008, IDT, Ed. 3 (SABS IEC 60282-2)

2

High-voltage fuses Part 2: Expulsion fuses

SANS 60305:1995/IEC 60305:1995, IDT, Ed. 4

2

Insulators for overhead lines with a nominal voltage above 1 000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type

3.01

Plugs, socket-outlets and couplers for industrial purposes Part 1: General requirements

SANS 60309-2:2006/IEC 60309-2:2005, IDT, Ed. 4.1 (SABS IEC 60309-2)

3.01

Plugs, socket-outlets and couplers for industrial purposes Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

SANS 60309-4:2006/IEC 60309-4:2006, IDT, Ed. 1

1

Plugs, socket-outlets and couplers for industrial purposes Part 4: Switched socket-outlets and connectors with or without interlock

SANS 60311:2003/IEC 60311:2002, IDT, Ed. 4 (SABS IEC 60311)

3

Electric irons for household or similar use - Methods for measuring performance

(SABS IEC 60252-1)

(SABS IEC 60254-2)

(SABS IEC 60265-2)

(SABS IEC 60269-2)

SANS 60269-3:2007/IEC 60269-3:2006, IDT, Ed. 3 (SABS IEC 60269-3)

(SABS IEC 60270)

(SABS IEC 60282-1)

(SABS IEC 60305)

SANS 60309-1:2006/IEC 60309-1:2005, IDT, Ed. 4.1 (SABS IEC 60309-1)

Page 273

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60317-0-1:2009/IEC 60317-0-1:2008, IDT, Ed. 3 3 (SABS IEC 60317-0-1)

Specifications for particular types of winding wires Part 0-1: General requirements - Enamelled round copper wire

SANS 60317-0-2:2009/IEC 60317-0-2:2005, IDT, Ed. 1.02 2.2

Specifications for particular types of winding wires Part 0-2: General requirements - Enamelled rectangular copper wire

SANS 60317-0-3:2008/IEC 60317-0-3:2008, IDT, Ed. 1 3

Specifications for particular types of winding wires Part 0-3: General requirements - Enamelled round aluminium wire

SANS 60317-4:2007/IEC 60317-4:2000, IDT, Ed. 3.2 (SABS IEC 60317-4)

1.02

Specifications for particular types of winding wires Part 4: Solderable polyurethane enamelled round copper wires, class 130

SANS 60317-8:2007/IEC 60317-8:1997, IDT, Ed. 3.2

1.02

(SABS IEC 60317-8)

Specifications for particular types of winding wires Part 8: Polyesterimide enamelled round copper wire, class 180

SANS 60317-12:1990/IEC 60317-12:1990, IDT, Ed. 2 1 (SABS IEC 60317-12)

Specifications for particular types of winding wires Part 12: Polyvinyl acetal enamelled round copper wire, class 120

SANS 60317-13:1997/IEC 60317-13:1997, IDT, Ed. 2.2 (SABS IEC 60317-13)

1.02

SANS 60317-100:2003/IEC 60317-7:1997, MOD, Ed. 1 3.2 SANS 60320-1:2008/IEC 60320-1:2007, IDT, Ed. 2.1 (SABS IEC 60320-1)

3.01

Specifications for particular types of winding wires Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 Specifications for particular types of winding wires Part 100: Enamelled round copper wire, class 220 Appliance couplers for household and similar general purposes Part 1: General requirements

SANS 60320-2-1:2000/IEC 60320-2-1:2000, IDT, Ed. 1 2 (SABS IEC 60320-2-1)

Appliance couplers for household and similar general purposes Part 2-1: Sewing machine couplers

SANS 60320-2-3:2005/IEC 60320-2-3:2005, IDT, Ed. 1.01 1.1 (SABS IEC 60320-2-3)

Appliance couplers for household and similar general purposes Part 2-3: Appliance couplers with a degree of protection higher than IPX0

SANS 60331-1:2009/IEC 60331-1:2009, IDT, Ed. 1

1

Tests for electric cables under fire conditions Circuit integrity Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm

SANS 60331-2:2009/IEC 60331-2:2009, IDT, Ed. 1

1

Tests for electric cables under fire conditions Circuit integrity Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm

SANS 60331-3:2009/IEC 60331-3:2009, IDT, Ed. 1

1

Tests for electric cables under fire conditions Circuit integrity Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure

SANS 60331-11:2009/IEC 60331-11:2009, IDT, Ed. 1.1 (SABS IEC 60331-11)

1.01

Tests for electric cables under fire conditions Circuit integrity Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C

SANS 60331-21:1999/IEC 60331-21:1999, IDT, Ed. 1 1 (SABS IEC 60331-21)

Tests for electric cables under fire conditions Circuit integrity Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV

Page 274

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60331-23:1999/IEC 60331-23:1999, IDT, Ed. 1 1 (SABS IEC 60331-23)

Tests for electric cables under fire conditions Circuit integrity Part 23: Procedures and requirements - Electric data cables

SANS 60331-25:1999/IEC 60331-25:1999, IDT, Ed. 1 1

Tests for electric cables under fire conditions Circuit integrity Part 25: Procedures and requirements - Optical fibre cables

(SABS IEC 60331-25) SANS 60332-1-1:2005/IEC 60332-1-1:2004, IDT, Ed. 1 1

Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single insulated wire or cable Apparatus

SANS 60332-1-2:2005/IEC 60332-1-2:2004, IDT, Ed. 1 1

Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW pre-mixed flame

SANS 60332-1-3:2005/IEC 60332-1-3:2004, IDT, Ed. 1 1

Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single insulated wire or cable Procedure for determination of flaming droplets/particles

SANS 60332-2-1:2005/IEC 60332-2-1:2004, IDT, Ed. 1 1

Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus

SANS 60332-2-2:2005/IEC 60332-2-2:2004, IDT, Ed. 1 1

Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame

SANS 60332-3-10:2009/IEC 60332-3-10:2009, IDT, Ed. 1.1 (SABS IEC 60332-3-10)

1.01

Tests on electric and optical fibre cables under fire conditions Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables Apparatus

SANS 60332-3-21:2000/IEC 60332-3-21:2000, IDT, Ed. 1 (SABS IEC 60332-3-21)

1

Tests on electric cables under fire conditions Part 321: Test for vertical flame spread of verticallymounted bunched wires or cables - Category A F/R

SANS 60332-3-22:2009/IEC 60332-3-22:2009, IDT, Ed. 1.1 (SABS IEC 60332-3-22)

1.01

Tests on electric and optical fibre cables under fire conditions Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables Category A

SANS 60332-3-23:2009/IEC 60332-3-23:2009, IDT, Ed. 1.1 (SABS IEC 60332-3-23)

1.01

Tests on electric and optical fibre cables under fire conditions Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables Category B

SANS 60332-3-24:2009/IEC 60332-3-24:2009, IDT, Ed. 1.1 (SABS IEC 60332-3-24)

1.01

Tests on electric and optical fibre cables under fire conditions Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables Category C

SANS 60332-3-25:2009/IEC 60332-3-25:2009, IDT, Ed. 1.1 (SABS IEC 60332-3-25)

1.01

Tests on electric and optical fibre cables under fire conditions Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables Category D

SANS 60335-1:2007/IEC 60335-1:2006, IDT, Ed. 4.2

2.02

(SABS IEC 60335-1)

Household and similar electrical appliances - Safety Part 1: General requirements

SANS 60335-2-2:2005/IEC 60335-2-2:2004, IDT, Ed. 3.01 5.1 (SABS IEC 60335-2-2)

Household and similar electrical appliances - Safety Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances

Page 275

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60335-2-3:2006/IEC 60335-2-3:2005, IDT, Ed. 3.01 5.1 (SABS IEC 60335-2-3)

Household and similar electrical appliances - Safety Part 2-3: Particular requirements for electric irons

SANS 60335-2-4:2009/IEC 60335-2-4:2008, IDT, Ed. 3 6 (SABS IEC 60335-2-4)

Household and similar electrical appliances - Safety Part 2-4: Particular requirements for spin extractors

SANS 60335-2-5:2009/IEC 60335-2-5:2008, IDT, Ed. 2.02 5.2 (SABS IEC 60335-2-5)

Household and similar electrical appliances - Safety Part 2-5: Particular requirements for dishwashers

SANS 60335-2-6:2008/IEC 60335-2-6:2008, IDT, Ed. 3.02 5.2 (SABS IEC 60335-2-6)

Household and similar electrical appliances - Safety Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances

SANS 60335-2-7:2009/IEC 60335-2-7:2008, IDT, Ed. 5 7 (SABS IEC 60335-2-7)

Household and similar electrical appliances - Safety Part 2-7: Particular requirements for washing machines

SANS 60335-2-8:2009/IEC 60335-2-8:2005, IDT, Ed. 2.01 5.1 (SABS IEC 60335-2-8)

Household and similar electrical appliances - Safety Part 2-8: Particular requirements for shavers, hair clippers and similar appliances

SANS 60335-2-9:2004/IEC 60335-2-9:2004, IDT, Ed. 3.01 5.1 (SABS IEC 60335-2-9)

Household and similar electrical appliances - Safety Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances

SANS 60335-2-10:2009/IEC 60335-2-10:2008, IDT, Ed. 5.1 (SABS IEC 60335-2-10)

2.01

Household and similar electrical appliances - Safety Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines

SANS 60335-2-11:2003/IEC 60335-2-11:2003, IDT, Ed. 6.1 (SABS IEC 60335-2-11)

3.01

Household and similar electrical appliances - Safety Part 2-11: Particular requirements for tumble dryers

SANS 60335-2-12:2009/IEC 60335-2-12:2008, IDT, Ed. 5.1 (SABS IEC 60335-2-12)

2.01

Household and similar electrical appliances - Safety Part 2-12: Particular requirements for warming plates and similar appliances

SANS 60335-2-13:2008/IEC 60335-2-13:2008, IDT, Ed. 5.2 (SABS IEC 60335-2-13)

2.02

Household and similar electrical appliances - Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances

SANS 60335-2-14:2009/IEC 60335-2-14:2008, IDT, Ed. 5.1 (SABS IEC 60335-2-14)

4.01

Household and similar electrical appliances - Safety Part 2-14: Particular requirements for kitchen machines

SANS 60335-2-15:2009/IEC 60335-2-15:2005, IDT, Ed. 5.1 (SABS IEC 60335-2-15)

3.01

Household and similar electrical appliances - Safety Part 2-15: Particular requirements for appliances for heating liquids

SANS 60335-2-16:2009/IEC 60335-2-16:2008, IDT, Ed. 5.1 (SABS IEC 60335-2-16)

3.01

Household and similar electrical appliances - Safety Part 2-16: Particular requirements for food waste disposers

SANS 60335-2-17:2008/IEC 60335-2-17:2006, IDT, Ed. 2.1 (SABS IEC 60335-2-17)

2.01

Household and similar electrical appliances - Safety Part 2-17: Particular requirements for blankets, pads and similar flexible heating appliances

SANS 60335-2-21:2000/IEC 60335-2-21:1997, MOD (SABS 60335-2-21)

1

Safety of household and similar electrical appliances Part 2-21: Particular requirements for storage water heaters

SANS 60335-2-23:2008/IEC 60335-2-23:2008, IDT, Ed. 5.1 (SABS IEC 60335-2-23)

3.01

Household and similar electrical appliances - Safety Part 2-23: Particular requirements for appliances for skin or hair care

Page 276

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60335-2-24:2003/IEC 60335-2-24:2002, IDT, Ed. 6 (SABS IEC 60335-2-24)

4

Household and similar electrical appliances - Safety Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers

SANS 60335-2-25:2006/IEC 60335-2-25:2005, IDT, Ed. 5.1 (SABS IEC 60335-2-25)

3.01

Household and similar electrical appliances - Safety Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens

SANS 60335-2-26:2009/IEC 60335-2-26:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-26)

3.01

Household and similar electrical appliances - Safety Part 2-26: Particular requirements for clocks

SANS 60335-2-27:2007/IEC 60335-2-27:2007, IDT, Ed. 4.2 (SABS IEC 60335-2-27)

3.02

Household and similar electrical appliances - Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

SANS 60335-2-28:2009/IEC 60335-2-28:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-28)

3.01

Household and similar electrical appliances - Safety Part 2-28: Particular requirements for sewing machines

SANS 60335-2-29:2005/IEC 60335-2-29:2004, IDT, Ed. 4.1 (SABS IEC 60335-2-29)

3.01

Household and similar electrical appliances - Safety Part 2-29: Particular requirements for battery chargers

SANS 60335-2-30:2008/IEC 60335-2-30:2004, IDT, Ed. 4.2 (SABS IEC 60335-2-30)

3.02

Household and similar electrical appliances - Safety Part 2-30: Particular requirements for room heaters

SANS 60335-2-31:2009/IEC 60335-2-31:2009, IDT, Ed. 4.2 (SABS IEC 60335-2-31)

3.02

Household and similar electrical appliances - Safety Part 2-31: Particular requirements for range hoods and other cooking fume extractors

SANS 60335-2-32:2008/IEC 60335-2-32:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-32)

3.01

Household and similar electrical appliances - Safety Part 2-32: Particular requirements for massage appliances

SANS 60335-2-34:2009/IEC 60335-2-34:2009, IDT, Ed. 4.2 (SABS IEC 60335-2-34)

4.02

Household and similar electrical appliances - Safety Part 2-34: Particular requirements for motorcompressors

SANS 60335-2-35:2007/IEC 60335-2-35:2003, IDT, Ed. 4.1 (SABS IEC 60335-2-35)

3.01

Household and similar electrical appliances - Safety Part 2-35: Particular requirements for instantaneous water heaters

SANS 60335-2-36:2010/IEC 60335-2-36:2008, IDT, Ed. 5.2 (SABS IEC 60335-2-36)

4.02

Household and similar electrical appliances - Safety Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements

SANS 60335-2-37:2009/IEC 60335-2-37:2008, IDT, Ed. 5.1 (SABS IEC 60335-2-37)

3.01

Household and similar electrical appliances - Safety Part 2-37: Particular requirements for commercial electric deep fat fryers

SANS 60335-2-38:2009/IEC 60335-2-38:2008, IDT, Ed. 5.1 (SABS IEC 60335-2-38)

4.01

Household and similar electrical appliances - Safety Part 2-38: Particular requirements for commercial electric griddles and griddle grills

SANS 60335-2-39:2009/IEC 60335-2-39:2008, IDT, Ed. 5.2 (SABS IEC 60335-2-39)

4.02

Household and similar electrical appliances - Safety Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans

SANS 60335-2-40:2006/IEC 60335-2-40:2005, IDT, Ed. 4.2 (SABS IEC 60335-2-40)

3.02

Household and similar electrical appliances - Safety Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers

SANS 60335-2-41:2004/IEC 60335-2-41:2004, IDT, Ed. 3.1 (SABS IEC 60335-2-41)

3.01

Household and similar electrical appliances - Safety Part 2-41: Particular requirements for pumps

Page 277

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60335-2-42:2010/IEC 60335-2-42:2009, IDT, Ed. 5.1 (SABS IEC 60335-2-42)

4.01

Household and similar electrical appliances - Safety Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens

SANS 60335-2-43:2009/IEC 60335-2-43:2008, IDT, Ed. 3.2 (SABS IEC 60335-2-43)

3.02

Household and similar electrical appliances - Safety Part 2-43: Particular requirements for clothes dryers and towel rails

SANS 60335-2-44:2009/IEC 60335-2-44:2009, IDT, Ed. 3.1 (SABS IEC 60335-2-44)

3.01

Household and similar electrical appliances - Safety Part 2-44: Particular requirements for ironers

SANS 60335-2-45:2009/IEC 60335-2-45:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-45)

3.01

Household and similar electrical appliances - Safety Part 2-45: Particular requirements for portable heating tools and similar appliances

SANS 60335-2-47:2009/IEC 60335-2-47:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-47)

4.01

Household and similar electrical appliances - Safety Part 2-47: Particular requirements for commercial electric boiling pans

SANS 60335-2-48:2009/IEC 60335-2-48:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-48)

4.01

Household and similar electrical appliances - Safety Part 2-48: Particular requirements for commercial electric grillers and toasters

SANS 60335-2-49:2009/IEC 60335-2-49:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-49)

4.01

Household and similar electrical appliances - Safety Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm

SANS 60335-2-50:2008/IEC 60335-2-50:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-50)

4.01

Household and similar electrical appliances - Safety Part 2-50: Particular requirements for commercial electric bains-marie

SANS 60335-2-51:2009/IEC 60335-2-51:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-51)

3.01

Household and similar electrical appliances - Safety Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations

SANS 60335-2-52:2009/IEC 60335-2-52:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-52)

3.01

Household and similar electrical appliances - Safety Part 2-52: Particular requirements for oral hygiene appliances

SANS 60335-2-53:2007/IEC 60335-2-53:2007, IDT, Ed. 3.1 (SABS IEC 60335-2-53)

3.01

Household and similar electrical appliances - Safety Part 2-53: Particular requirements for sauna heating appliances

SANS 60335-2-54:2009/IEC 60335-2-54:2008, IDT, Ed. 4 (SABS IEC 60335-2-54)

4

Household and similar electrical appliances - Safety Part 2-54: Particular requirements for surfacecleaning appliances for household use employing liquids or steam

SANS 60335-2-55:2009/IEC 60335-2-55:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-55)

3.01

Household and similar electrical appliances - Safety Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds

SANS 60335-2-56:2009/IEC 60335-2-56:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-56)

3.01

Household and similar electrical appliances - Safety Part 2-56: Particular requirements for projectors and similar appliances

SANS 60335-2-58:2009/IEC 60335-2-58:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-58)

3.01

Household and similar electrical appliances - Safety Part 2-58: Particular requirements for commercial electric dishwashing machines

SANS 60335-2-59:2003/IEC 60335-2-59:2002, IDT, Ed. 3 (SABS IEC 60335-2-59)

3

Household and similar electrical appliances - Safety Part 2-59: Particular requirements for insect killers

Page 278

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60335-2-60:2009/IEC 60335-2-60:2008, IDT, Ed. 3.2 (SABS IEC 60335-2-60)

3.02

Household and similar electrical appliances - Safety Part 2-60: Particular requirements for whirlpool baths and whirlpool spas

SANS 60335-2-61:2010/IEC 60335-2-61:2009, IDT, Ed. 2.2 (SABS IEC 60335-2-61)

2.02

Household and similar electrical appliances - Safety Part 2-61: Particular requirements for thermal storage room heaters

SANS 60335-2-62:2008/IEC 60335-2-62:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-62)

3.01

Household and similar electrical appliances - Safety Part 2-62: Particular requirements for commercial electric rinsing sinks

SANS 60335-2-64:2008/IEC 60335-2-64:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-64)

3.01

Household and similar electrical appliances - Safety Part 2-64: Particular requirements for commercial electric kitchen machines

SANS 60335-2-65:2009/IEC 60335-2-65:2008, IDT, Ed. 2.1 (SABS IEC 60335-2-65)

2.01

Household and similar electrical appliances - Safety Part 2-65: Particular requirements for air-cleaning appliances

SANS 60335-2-66:2009/IEC 60335-2-66:2009, IDT, Ed. 2.1 (SABS IEC 60335-2-66)

2.01

Household and similar electrical appliances - Safety Part 2-66: Particular requirements for water-bed heaters

SANS 60335-2-67:2003/IEC 60335-2-67:2002, IDT, Ed. 3 (SABS IEC 60335-2-67)

3

Household and similar electrical appliances - Safety Part 2-67: Particular requirements for floor treatment and floor cleaning machines, for industrial and commercial use

SANS 60335-2-68:2007/IEC 60335-2-68:2007, IDT, Ed. 3.2 (SABS IEC 60335-2-68)

3.02

Household and similar electrical appliances - Safety Part 2-68: Particular requirements for spray extraction appliances, for industrial and commercial use

SANS 60335-2-69:2008/IEC 60335-2-69:2008, IDT, Ed. 3.2 (SABS IEC 60335-2-69)

3.02

Household and similar electrical appliances - Safety Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use

SANS 60335-2-70:2007/IEC 60335-2-70:2007, IDT, Ed. 2.1 (SABS IEC 60335-2-70)

2.01

Household and similar electrical appliances - Safety Part 2-70: Particular requirements for milking machines

SANS 60335-2-71:2007/IEC 60335-2-71:2007, IDT, Ed. 2.1 (SABS IEC 60335-2-71)

2.01

Household and similar electrical appliances - Safety Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals

SANS 60335-2-72:2003/IEC 60335-2-72:2002, IDT, Ed. 2 (SABS IEC 60335-2-72)

2

Household and similar electrical appliances - Safety Part 2-72: Particular requirements for automatic machines for floor treatment for commercial and industrial use

SANS 60335-2-73:2003/IEC 60335-2-73:2002, IDT, Ed. 2 (SABS IEC 60335-2-73)

2

Household and similar electrical appliances - Safety Part 2-73: Particular requirements for fixed immersion heaters

SANS 60335-2-74:2003/IEC 60335-2-74:2002, IDT, Ed. 2 (SABS IEC 60335-2-74)

2

Household and similar electrical appliances - Safety Part 2-74: Particular requirements for portable immersion heaters

SANS 60335-2-75:2009/IEC 60335-2-75:2009, IDT, Ed. 2.2 (SABS IEC 60335-2-75)

2.02

Household and similar electrical appliances - Safety Part 2-75: Particular requirements for commercial dispensing appliances and vending machines

SANS 60335-2-76:2006/IEC 60335-2-76:2006, IDT, Ed. 2.1 (SABS IEC 60335-2-76)

2.01

Household and similar electrical appliances - Safety Part 2-76: Particular requirements for electric fence energizers

Page 279

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60335-2-77:2006/IEC 60335-2-77:1996, MOD (SABS 60335-2-77)

1.01

Safety of household and similar electrical appliances Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers

SANS 60335-2-78:2009/IEC 60335-2-78:2008, IDT, Ed. 2.1 (SABS IEC 60335-2-78)

2.01

Household and similar electrical appliances - Safety Part 2-78: Particular requirements for outdoor barbecues

SANS 60335-2-79:2008/IEC 60335-2-79:2007, IDT, Ed. 2.2 (SABS IEC 60335-2-79)

2.02

Household and similar electrical appliances - Safety Part 2-79: Particular requirements for high pressure cleaners and steam cleaners

SANS 60335-2-80:2009/IEC 60335-2-80:2008, IDT, Ed. 2.2 (SABS IEC 60335-2-80)

2.02

Household and similar electrical appliances - Safety Part 2-80: Particular requirements for fans

SANS 60335-2-81:2007/IEC 60335-2-81:2007, IDT, Ed. 2.1 (SABS IEC 60335-2-81)

2.01

Household and similar electrical appliances - Safety Part 2-81: Particular requirements for foot warmers and heating mats

SANS 60335-2-82:2009/IEC 60335-2-82:2008, IDT, Ed. 2.1 (SABS IEC 60335-2-82)

2.01

Household and similar electrical appliances - Safety Part 2-82: Particular requirements for amusement machines and personal service machines

SANS 60335-2-83:2009/IEC 60335-2-83:2008, IDT, Ed. 1.1

1.01

Household and similar electrical appliances - Safety Part 2-83: Particular requirements for heated gullies for roof drainage

SANS 60335-2-84:2009/IEC 60335-2-84:2008, IDT, Ed. 2.1 (SABS IEC 60335-2-84)

2.01

Household and similar electrical appliances - Safety Part 2-84: Particular requirements for toilets

SANS 60335-2-85:2009/IEC 60335-2-85:2008, IDT, Ed. 2.1 (SABS IEC 60335-2-85)

2.01

Household and similar electrical appliances - Safety Part 2-85: Particular requirements for fabric steamers

SANS 60335-2-86:2003/IEC 60335-2-86:2002, IDT, Ed. 2 (SABS IEC 60335-2-86)

2

Household and similar electrical appliances - Safety Part 2-86: Particular requirements for electric fishing machines

SANS 60335-2-87:2008/IEC 60335-2-87:2007, IDT, Ed. 2.1 (SABS IEC 60335-2-87)

2.01

Household and similar electrical appliances - Safety Part 2-87: Particular requirements for electrical animal-stunning equipment

SANS 60335-2-88:2003/IEC 60335-2-88:2002, IDT, Ed. 2 (SABS IEC 60335-2-88)

2

Household and similar electrical appliances - Safety Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or airconditioning systems

SANS 60335-2-89:2007/IEC 60335-2-89:2007, IDT, Ed. 1.2

1.02

Household and similar electrical appliances - Safety Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor

SANS 60335-2-90:2004/IEC 60335-2-90:2003, IDT, Ed. 2.1 (SABS IEC 60335-2-90)

2.01

Household and similar electrical appliances - Safety Part 2-90: Particular requirements for commercial microwave ovens

SANS 60335-2-91:2008/IEC 60335-2-91:2008, IDT, Ed. 3 (SABS IEC 60335-2-91)

3

Household and similar electrical appliances - Safety Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers

SANS 60335-2-92:2003/IEC 60335-2-92:2002, IDT, Ed. 2 (SABS IEC 60335-2-92)

2

Household and similar electrical appliances - Safety Part 2-92: Particular requirements for pedestriancontrolled mains-operated lawn scarifiers and aerators

Page 280

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60335-2-94:2008/IEC 60335-2-94:2008, IDT, Ed. 3 (SABS IEC 60335-2-94)

3

Household and similar electrical appliances - Safety Part 2-94: Particular requirements for scissors type grass shears

SANS 60335-2-95:2010/IEC 60335-2-95:2008, IDT, Ed. 2.2 (SABS IEC 60335-2-95)

2.02

Household and similar electrical appliances - Safety Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

SANS 60335-2-96:2009/IEC 60335-2-96:2008, IDT, Ed. 1.2

1.02

Household and similar electrical appliances - Safety Part 2-96: Particular requirements for flexible sheet heating elements for room heating

SANS 60335-2-97:2009/IEC 60335-2-97:2009, IDT, Ed. 2.2 (SABS IEC 60335-2-97)

2.02

Household and similar electrical appliances - Safety Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment

SANS 60335-2-98:2010/IEC 60335-2-98:2008, IDT, Ed. 2.2 (SABS IEC 60335-2-98)

2.02

Household and similar electrical appliances - Safety Part 2-98: Particular requirements for humidifiers

SANS 60335-2-99:2003/IEC 60335-2-99:2003, IDT, Ed. 1

1

Household and similar electrical appliances - Safety Part 2-99: Particular requirements for commercial electric hoods

SANS 60335-2-100:2003/IEC 60335-2-100:2002, IDT, Ed. 1

1

Household and similar electrical appliances - Safety Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums

SANS 60335-2-101:2009/IEC 60335-2-101:2008, IDT, Ed. 1.1

1.01

Household and similar electrical appliances - Safety Part 2-101: Particular requirements for vaporizers

SANS 60335-2-102:2009/IEC 60335-2-102:2008, IDT, Ed. 1.1

1.01

Household and similar electrical appliances - Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections

SANS 60335-2-103:2003/IEC 60335-2-103:2002, IDT, Ed. 1

1

Household and similar electrical appliances - Safety Part 2-103: Particular requirements for drives for gates, doors and windows

SANS 60335-2-104:2003/IEC 60335-2-104:2003, IDT, Ed. 1

1

Household and similar electrical appliances - Safety Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment

SANS 60335-2-105:2008/IEC 60335-2-105:2008, IDT, Ed. 1.1

1.01

Household and similar electrical appliances - Safety Part 2-105: Particular requirements for multifunctional shower cabinets

SANS 60335-2-106:2007/IEC 60335-2-106:2007, IDT, Ed. 1

1

Household and similar electrical appliances - Safety Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings

SANS 60350:2010/IEC 60350:2009, IDT, Ed. 2.2

1.02

Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance

SANS 60372:1984/IEC 60372:1984, IDT, Ed. 3 (SABS IEC 60372)

1

Locking devices for ball and socket couplings of string insulator units - Dimensions and tests

SANS 60383-1:1993/IEC 60383-1:1993, IDT, Ed. 4

1

Insulators for overhead lines with a nominal voltage above 1 000 V Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria

(SABS IEC 60350)

(SABS IEC 60383-1)

Page 281

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60383-2:1993/IEC 60383-2:1993, IDT, Ed. 1 (SABS IEC 60383-2)

1

Insulators for overhead lines with a nominal voltage above 1 000 V Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria

SANS 60384-1:1999/IEC 60384-1:1999, IDT, Ed. 3 (SABS IEC 60384-1)

2

Fixed capacitors for use in electronic equipment Part 1: Generic specification

SANS 60384-2:2007/IEC 60384-2:2005, IDT, Ed. 3

2

Fixed capacitors for use in electronic equipment Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors

SANS 60384-2-1:2007/IEC 60384-2-1:2005, IDT, Ed. 2 2 (SABS IEC 60384-2-1)

Fixed capacitors for use in electronic equipment Part 2-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors - Assessment levels E and EZ

SANS 60384-4:2007/IEC 60384-4:2007, IDT, Ed. 4 (SABS IEC 60384-4)

2

Fixed capacitors for use in electronic equipment Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (Mn02) and non-solid electrolyte

SANS 60384-6:2007/IEC 60384-6:2005, IDT, Ed. 3 (SABS IEC 60384-6)

2

Fixed capacitors for use in electronic equipment Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric d.c. capacitors

SANS 60384-6-1:2007/IEC 60384-6-1:2005, IDT, Ed. 2 2 (SABS IEC 60384-6-1)

Fixed capacitors for use in electronic equipment Part 6-1: Blank detail specification: Fixed metallized polycarbonate film dielectric d.c. capacitors Assessment level E

SANS 60384-14:2007/IEC 60384-14:2005, IDT, Ed. 3 2 (SABS IEC 60384-14)

Fixed capacitors for use in electronic equipment Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

SANS 60384-14-1:2007/IEC 60384-14-1:2005, IDT, Ed. 2 (SABS IEC 60384-14-1)

2

Fixed capacitors for use in electronic equipment Part 14-1: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level D

SANS 60399:2010/IEC 60399:2008, IDT, Ed. 2.1

1.01

Barrel thread for lampholders with shade holder ring

SANS 60400:2008/IEC 60400:2008, IDT, Ed. 7

4

Lampholders for tubular fluorescent lamps and starterholders

SANS 60423:2008/IEC 60423:2007, IDT, Ed. 3 (SABS IEC 60423)

2

Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings

SANS 60432-1:2006/IEC 60432-1:2005, IDT, Ed. 2.1

1.01

Incandescent lamps - Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

SANS 60432-2:2006/IEC 60432-2:2005, IDT, Ed. 2.1 (SABS IEC 60432-2)

1.01

Incandescent lamps - Safety specifications Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

SANS 60432-3:2010/IEC 60432-3:2008, IDT, Ed. 1.2

1.02

Incandescent lamps - Safety specifications Part 3: Tungsten-halogen lamps (non-vehicle)

SANS 60439-1:2004/IEC 60439-1:2004, IDT, Ed. 4.1 (SABS IEC 60439-1)

3.01

Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies

SANS 60439-2:2006/IEC 60439-2:2005, IDT, Ed. 3.1

2.01

Low-voltage switchgear and controlgear assemblies Part 2: Particular requirements for busbar trunking systems (busways)

(SABS IEC 60384-2)

(SABS IEC 60400)

(SABS IEC 60432-1)

(SABS IEC 60439-2)

Page 282

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60439-3:2007/IEC 60439-3:2001, IDT, Ed. 1.2 (SABS IEC 60439-3)

1.02

Low-voltage switchgear and controlgear assemblies Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards

SANS 60439-4:2005/IEC 60439-4:2004, IDT, Ed. 2 (SABS IEC 60439-4)

2

Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites (ACS)

SANS 60439-5:2006/IEC 60439-5:2006, IDT, Ed. 2

2

Low-voltage switchgear and controlgear assemblies Part 5: Particular requirements for assemblies for power distribution in public networks

SANS 60456:2007/IEC 60456:2003, IDT, Ed. 4 (SABS IEC 60456)

2

Clothes washing machines for household use Methods for measuring the performance

SANS 60470:2008/IEC 60470:2000, IDT, Ed. 2

2

High-voltage alternating current contactors and contactor-based motor-starters

SANS 60471:1977/IEC 60471:1977, IDT, Ed. 2 (SABS IEC 60471)

1

Dimensions of clevis and tongue couplings of string insulator units

SANS 60478-4:1976/IEC 60478-4:1976, IDT, Ed. 1

1

Stabilized power supplies, d.c. output Part 4: Tests other than radio-frequency interference

SANS 60479-1:2006/IEC TS 60479-1:2005, IDT, Ed. 4 (SABS IEC 60479-1)

2

Effects of current on human beings and livestock Part 1: General aspects

SANS 60479-2:2007/IEC TS 60479-2:2007, IDT, Ed. 3 (SABS IEC 60479-2)

2

Effects of current on human beings and livestock Part 2: Special aspects

SANS 60479-4:2005/IEC TR 60479-4:2004, IDT, Ed. 1

1

Effects of current on human beings and livestock Part 4: Effects of lightning strokes on human beings and livestock

SANS 60479-3:1998/IEC 60479-3:1998, IDT, Ed. 1 (SABS IEC 60479-3)

1

Effects of current on human beings and livestock Part 3: Effects of currents passing through the body of livestock

SANS 60496:1975/IEC 60496:1975, IDT, Ed. 1

1

Methods for measuring the performance of electric warming plates for household and similar purposes

SANS 60502-4:2006/IEC 60502-4:2005, IDT, Ed. 2 (SABS IEC 60502-4)

2

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

SANS 60514:1975/IEC 60514:1975, IDT, Ed. 1

1

Acceptance inspection of Class 2 alternating-current watthour meters

SANS 60529:2001/IEC 60529:2001, IDT, Ed. 2.1 (SABS IEC 60529)

1.01

Degrees of protection provided by enclosures (IP Code)

SANS 60530:1975/IEC 60530:1975, IDT, Ed. 1

1

Methods for measuring the performance of electric kettles and jugs for household and similar use

SANS 60570:2003/IEC 60570:2003, IDT, Ed. 4 (SABS IEC 60570)

2

Electrical supply track systems for luminaires

SANS 60598-1:2009/IEC 60598-1:2008, IDT, Ed. 7

5

Luminaires Part 1: General requirements and tests

(SABS IEC 60439-5)

(SABS IEC 60470)

(SABS IEC 60478-4)

(SABS IEC 60496)

(SABS IEC 60514)

(SABS IEC 60530)

(SABS IEC 60598-1)

Page 283

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60598-2-1:1979/IEC 60598-2-1:1979, IDT, Ed. 1 1 (SABS IEC 60598-2-1)

Luminaires Part 2: Particular requirements Section 1: Fixed general purpose luminaires

SANS 60598-2-2:1997/IEC 60598-2-2:1997, IDT, Ed. 1 2.1 (SABS IEC 60598-2-2)

Luminaires Part 2: Particular requirements Section 2: Recessed luminaires

SANS 60598-2-3:2003/IEC 60598-2-3:2002, IDT, Ed. 2 3 (SABS IEC 60598-2-3)

Luminaires Part 2-3: Particular requirements Luminaires for road and street lighting

SANS 60598-2-4:1997/IEC 60598-2-4:1997, IDT, Ed. 1 2 (SABS IEC 60598-2-4)

Luminaires Part 2: Particular requirements Section 4: Portable general purpose luminaires

SANS 60598-2-5:1998/IEC 60598-2-5:1998, IDT, Ed. 1 2 (SABS IEC 60598-2-5)

Luminaires Part 2-5: Particular requirements Floodlights

SANS 60598-2-6:1994/IEC 60598-2-6:1994, IDT, Ed. 1 2 (SABS IEC 60598-2-6)

Luminaires Part 2: Particular requirements Section 6: Luminaires with built-in transformers or convertors for filament lamps

SANS 60598-2-7:1982/IEC 60598-2-7:1982, IDT, Ed. 1 1 (SABS IEC 60598-2-7)

Luminaires Part 2: Particular requirements Section 7: Portable luminaires for garden use

SANS 60598-2-8:2008/IEC 60598-2-8:2007, IDT, Ed. 1.02 2.2 (SABS IEC 60598-2-8)

Luminaires Part 2-8: Particular requirements Handlamps

SANS 60598-2-9:1987/IEC 60598-2-9:1987, IDT, Ed. 1 2 (SABS IEC 60598-2-9)

Luminaires Part 2: Particular requirements Section 9: Photo and film luminaires (non-professional)

SANS 60598-2-10:2003/IEC 60598-2-10:2003, IDT, Ed. 2 (SABS IEC 60598-2-10)

2

Luminaires Part 2-10: Particular requirements Portable luminaires for children

SANS 60598-2-11:2006/IEC 60598-2-11:2005, IDT, Ed. 1

1

Luminaires Part 2-11: Particular requirements Aquarium luminaires

SANS 60598-2-12:2006/IEC 60598-2-12:2006, IDT, Ed. 1

1

Luminaires Part 2-12: Particular requirements Mains socket-outlet mounted nightlights

SANS 60598-2-13:2007/IEC 60598-2-13:2006, IDT, Ed. 1

1

Luminaires Part 2-13: Particular requirements Ground recessed luminaires

SANS 60598-2-14:2009/IEC 60598-2-14:2009, IDT, Ed. 1

1

Luminaires Part 2-14: Particular requirements Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment

SANS 60598-2-17:1984/IEC 60598-2-17:1984, IDT, Ed. 1 (SABS IEC 60598-2-17)

1

Luminaires Part 2: Particular requirements Section 17: Luminaires for stage lighting, television, film and photographic studios (outdoor and indoor)

SANS 60598-2-18:1993/IEC 60598-2-18:1993, IDT, Ed. 2 (SABS IEC 60598-2-18)

1

Luminaires Part 2: Particular requirements Section 18: Luminaires for swimming pools and similar applications

SANS 60598-2-19:1981/IEC 60598-2-19:1981, IDT, Ed. 1 (SABS IEC 60598-2-19)

1

Luminaires Part 2: Particular requirements Section 19: Air-handling luminaires (safety requirements)

Page 284

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60598-2-20:2003/IEC 60598-2-20:2002, IDT, Ed. 2.2 (SABS IEC 60598-2-20)

1.02

Luminaires Part 2-20: Particular requirements Lighting chains

SANS 60598-2-23:2001/IEC 60598-2-23:2001, IDT, Ed. 1.1 (SABS IEC 60598-2-23)

1.01

Luminaires Part 2-23: Particular requirements Extra low voltage lighting systems for filament lamps

SANS 60598-2-24:1997/IEC 60598-2-24:1997, IDT, Ed. 1 (SABS IEC 60598-2-24)

1

Luminaires Part 2: Particular requirements Section 24: Luminaires with limited surface temperatures

SANS 60598-2-25:1994/IEC 60598-2-25:1994, IDT, Ed. 1 (SABS IEC 60598-2-25)

1

Luminaires Part 2-25: Particular requirements Luminaires for use in clinical areas of hospitals and health care buildings

SANS 60601-1:2007/IEC 60601-1:2005, IDT, Ed. 3

2

Medical electrical equipment Part 1: General requirements for basic safety and essential performance

(SABS IEC 60601-1) SANS 60601-1-2:2005/IEC 60601-1-2:2004, IDT, Ed. 2.01 2.1 (SABS IEC 60601-1-2) SANS 60601-1-10:2009/IEC 60601-1-10:2007, IDT, Ed. 1

1

SANS 60601-2-2:2009/IEC 60601-2-2:2009, IDT, Ed. 1 5

Medical electrical equipment Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests Medical electrical equipment Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers Medical electrical equipment Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories

SANS 60601-2-19:2009/IEC 60601-2-19:2009, IDT, Ed. 2

1

Medical electrical equipment Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators

SANS 60601-2-20:2009/IEC 60601-2-20:2009, IDT, Ed. 2

1

Medical electrical equipment Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators

SANS 60601-2-21:2009/IEC 60601-2-21:2009, IDT, Ed. 2

1

Medical electrical equipment Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers

SANS 60601-2-50:2010/IEC 60601-2-50:2009, IDT, Ed. 2

1

Medical electrical equipment Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment

SANS 60614-1:1994/IEC 60614-1:1994, IDT, Ed. 2

1

(SABS IEC 60614-1)

Conduits for electrical installations - Specification Part 1: General requirements

SANS 60614-2-1:1982/IEC 60614-2-1:1982, IDT, Ed. 1 1 (SABS IEC 60614-2-1)

Specification for conduits for electrical installations Part 2: Particular specifications for conduits Section 1: Metal conduits

SANS 60614-2-2:1980/IEC 60614-2-2:1980, IDT, Ed. 1 1 (SABS IEC 60614-2-2)

Specification for conduits for electrical installations Part 2: Particular specification for conduits Section 2: Rigid plain conduits of insulating materials

SANS 60614-2-3:1990/IEC 60614-2-3:1990, IDT, Ed. 1 1 (SABS IEC 60614-2-3)

Specification for conduits for electrical installations Part 2: Particular specifications for conduits Section 3: Pliable conduits of insulating material

Page 285

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60614-2-4:1985/IEC 60614-2-4:1985, IDT, Ed. 1 1 (SABS IEC 60614-2-4)

Specification for conduits for electrical installations Part 2: Particular specifications for conduits Section 4: Pliable self-recovering conduits of insulating materials

SANS 60614-2-5:1992/IEC 60614-2-5:1992, IDT, Ed. 1 1 (SABS IEC 60614-2-5)

Specification for conduits for electrical installations Part 2: Particular specifications for conduits Section 5: Flexible conduits

SANS 60614-2-6:1992/IEC 60614-2-6:1992, IDT, Ed. 1 1 (SABS IEC 60614-2-6)

Specification for conduits for electrical installations Part 2: Particular specifications for conduits Section 6: Pliable conduits of metal or composite materials

SANS 60614-2-7:1995/IEC 60614-2-7:1995, IDT, Ed. 1 1 (SABS IEC 60614-2-7)

Conduits for electrical installations - Specification Part 2: Particular specifications for conduits Section 7: Rigid non-threadable conduits of aluminium alloy

SANS 60623:2001/IEC 60623:2001, IDT, Ed. 4 (SABS IEC 60623)

1

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells

SANS 60660:1999/IEC 60660:1999, IDT, Ed. 2

1

Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV

SANS 60662:2003/IEC 60662:2002, IDT, Ed. 1.10 (SABS IEC 60662)

1.1

High-pressure sodium vapour lamps

SANS 60669-1:2007/IEC 60669-1:2007, IDT, Ed. 3.2

2.02

(SABS IEC 60669-1)

Switches for household and similar fixed-electrical installations Part 1: General requirements

SANS 60669-2-1:2009/IEC 60669-2-1:2009, IDT, Ed. 3.01 4.1 (SABS IEC 60669-2-1)

Switches for household and similar fixed electrical installations Part 2-1: Particular requirements Electronic switches

SANS 60669-2-2:2007/IEC 60669-2-2:2006, IDT, Ed. 2 3 (SABS IEC 60669-2-2)

Switches for household and similar fixed electrical installations Part 2-2: Particular requirements Electromagnetic remote-control switches (RCS)

SANS 60669-2-3:2007/IEC 60669-2-3:2006, IDT, Ed. 2 3 (SABS IEC 60669-2-3)

Switches for household and similar fixed electrical installations Part 2-3: Particular requirements Time-delay switches (TDS)

SANS 60669-2-4:2005/IEC 60669-2-4:2004, IDT, Ed. 1 1

Switches for household and similar fixed electrical installations Part 2-4: Particular requirements Isolating switches

(SABS IEC 60660)

1

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General requirements

SANS 60670-21:2005/IEC 60670-21:2004, IDT, Ed. 1 1

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 21: Particular requirements for boxes and enclosures with provision for suspension means

SANS 60670-22:2003/IEC 60670-22:2003, IDT, Ed. 1 1

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 22: Particular requirements for connecting boxes and enclosures

SANS 60670-23:2006/IEC 60670-23:2006, IDT, Ed. 1 1

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 23: Particular requirements for floor boxes and enclosures

SANS 60670-1:2003/IEC 60670-1:2002, IDT, Ed. 1

Page 286

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60670-24:2006/IEC 60670-24:2005, IDT, Ed. 1 1

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 24: Particular requirements for enclosures for housing protective devices and similar power consuming devices

SANS 60675:2006/IEC 60675:1998, IDT, Ed. 2.1 (SABS IEC 60675)

1.01

Household electric direct-acting room heaters Methods for measuring performance

SANS 60694:2003/IEC 60694:2002, IDT, Ed. 2.2

2.02

Common specifications for high-voltage switchgear and controlgear standards

SANS 60695-11-10:2004/IEC 60695-11-10:2003, IDT, Ed. 1.1

1.01

Fire hazard testing Part 11-10: Test flames - 50 W horizontal and vertical flame test methods

SANS 60705:2006/IEC 60705:2006, IDT, Ed. 3.2 (SABS IEC 60705)

2.02

Household microwave ovens - Methods for measuring performance

SANS 60720:1981/IEC 60720:1981, IDT, Ed. 1

1

Characteristics of line post insulators

SANS 60728-2:2005/IEC 60728-2:2002, IDT, Ed. 1

1

Cabled distribution systems for television and sound signals Part 2: Electromagnetic compatibility for equipment

SANS 60730-1:2007/IEC 60730-1:2007, IDT, Ed. 3.2

2.02

Automatic electrical controls for household and similar use Part 1: General requirements

SANS 60730-2-2:2007/IEC 60730-2-2:2005, IDT, Ed. 1.01 2.1

Automatic electrical controls for household and similar use Part 2-2: Particular requirements for thermal motor protectors

SANS 60730-2-3:2007/IEC 60730-2-3:2006, IDT, Ed. 1 2

Automatic electrical controls for household and similar use Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps

SANS 60730-2-4:2007/IEC 60730-2-4:2006, IDT, Ed. 1 2

Automatic electrical controls for household and similar use Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type

SANS 60730-2-5:2009/IEC 60730-2-5:2008, IDT, Ed. 1.02 3.2

Automatic electrical controls for household and similar use Part 2-5: Particular requirements for automatic electrical burner control systems

SANS 60730-2-6:2007/IEC 60730-2-6:2007, IDT, Ed. 1 2

Automatic electrical controls for household and similar use Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

SANS 60730-2-7:2008/IEC 60730-2-7:2008, IDT, Ed. 2 2

Automatic electrical controls for household and similar use Part 2-7: Particular requirements for timers and time switches

SANS 60730-2-8:2003/IEC 60730-2-8:2003, IDT, Ed. 1.01 2.1

Automatic electrical controls for household and similar use Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements

SANS 60730-2-9:2008/IEC 60730-2-9:2008, IDT, Ed. 2 3 (SABS IEC 60730-2-9)

Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls

SANS 60730-2-10:2007/IEC 60730-2-10:2006, IDT, Ed. 2

Automatic electrical controls for household and similar use Part 2-10: Particular requirements for motor-starting relays

(SABS IEC 60694)

(SABS IEC 60720)

(SABS IEC 60730-1)

1

Page 287

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60730-2-11:2007/IEC 60730-2-11:2006, IDT, Ed. 2 (SABS IEC 60730-2-11)

2

Automatic electrical controls for household and similar use Part 2-11: Particular requirements for energy regulators

SANS 60730-2-12:2007/IEC 60730-2-12:2005, IDT, Ed. 2

1

Automatic electrical controls for household and similar use Part 2-12: Particular requirements for electrically operated door locks

SANS 60730-2-13:2007/IEC 60730-2-13:2006, IDT, Ed. 2

1

Automatic electrical controls for household and similar use Part 2-13: Particular requirements for humidity sensing controls

SANS 60730-2-14:2008/IEC 60730-2-14:2008, IDT, Ed. 1.2

1.02

Automatic electrical controls for household and similar use Part 2-14: Particular requirements for electric actuators

SANS 60730-2-15:2008/IEC 60730-2-15:2008, IDT, Ed. 2

2

Automatic electrical controls for household and similar use Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls

SANS 60730-2-16:2007/IEC 60730-2-16:2001, IDT, Ed. 1.2

1.02

Automatic electrical controls for household and similar use Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications

SANS 60730-2-17:2008/IEC 60730-2-17:2007, IDT, Ed. 1.2

1.02

Automatic electrical controls for household and similar use Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements

SANS 60730-2-18:2007/IEC 60730-2-18:1997, IDT, Ed. 1

1

Automatic electrical controls for household and similar use Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements

SANS 60730-2-19:2008/IEC 60730-2-19:2007, IDT, Ed. 1.2

1.02

Automatic electrical controls for household and similar use Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements

SANS 60734:2006/IEC 60734:2001, IDT, Ed. 3 (SABS IEC 60734)

2

Household electrical appliances - Performance Hard water for testing

SANS 60745-1:2004/IEC 60745-1:2003, IDT, Ed. 3.2

3.02

(SABS IEC 60745-1)

Hand-held motor-operated electric tools - Safety Part 1: General requirements

SANS 60745-2-1:2009/IEC 60745-2-1:2008, IDT, Ed. 2.01 2.1 (SABS IEC 60745-2-1)

Hand-held motor-operated electric tools - Safety Part 2-1: Particular requirements for drills and impact drills

SANS 60745-2-2:2008/IEC 60745-2-2:2008, IDT, Ed. 2.01 2.1 (SABS IEC 60745-2-2)

Hand-held motor-operated electric tools - Safety Part 2-2: Particular requirements for screwdrivers and impact wrenches

SANS 60745-2-3:2007/IEC 60745-2-3:2006, IDT, Ed. 2 2 (SABS IEC 60745-2-3)

Hand-held motor-operated electric tools - Safety Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

SANS 60745-2-4:2007/IEC 60745-2-4:2006, IDT, Ed. 2 2 (SABS IEC 60745-2-4)

Hand-held motor-operated electric tools - Safety Part 2-4: Particular requirements for sanders and polishers other than disk type

SANS 60745-2-5:2003/IEC 60745-2-5:2003, IDT, Ed. 3 3 (SABS IEC 60745-2-5)

Hand-held motor-operated electric tools - Safety Part 2-5: Particular requirements for circular saws

Page 288

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60745-2-6:2007/IEC 60745-2-6:2006, IDT, Ed. 2.01 2.1 (SABS IEC 60745-2-6)

Hand-held motor-operated electric tools - Safety Part 2-6: Particular requirements for hammers

SANS 60745-2-7:1989/IEC 60745-2-7:1989, IDT, Ed. 1 1 (SABS IEC 60745-2-7)

Safety of hand-held motor-operated electric tools Part 2-7: Particular requirements for spray guns for non-flammable liquids

SANS 60745-2-8:2003/IEC 60745-2-8:2003, IDT, Ed. 2 2 (SABS IEC 60745-2-8)

Hand-held motor-operated electric tools - Safety Part 2-8: Particular requirements for shears and nibblers

SANS 60745-2-9:2009/IEC 60745-2-9:2008, IDT, Ed. 2.01 2.1 (SABS IEC 60745-2-9)

Hand-held motor-operated electric tools - Safety Part 2-9: Particular requirements for tappers

SANS 60745-2-11:2009/IEC 60745-2-11:2008, IDT, Ed. 2.1 (SABS IEC 60745-2-11)

2.01

Hand-held motor-operated electric tools - Safety Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)

SANS 60745-2-12:2009/IEC 60745-2-12:2008, IDT, Ed. 2.1 (SABS IEC 60745-2-12)

2.01

Hand-held motor-operated electric tools - Safety Part 2-12: Particular requirements for concrete vibrators

SANS 60745-2-13:2010/IEC 60745-2-13:2009, IDT, Ed. 2.1 (SABS IEC 60745-2-13)

2.01

Hand-held motor-operated electric tools - Safety Part 2-13: Particular requirements for chain saws

SANS 60745-2-14:2003/IEC 60745-2-14:2003, IDT, Ed. 2 (SABS IEC 60745-2-14)

2

Hand-held motor-operated electric tools - Safety Part 2-14: Particular requirements for planers

SANS 60745-2-15:2010/IEC 60745-2-15:2009, IDT, Ed. 2.1 (SABS IEC 60745-2-15)

2.01

Hand-held motor-operated electric tools - Safety Part 2-15: Particular requirements for hedge trimmers

SANS 60745-2-16:2008/IEC 60745-2-16:2008, IDT, Ed. 2 (SABS IEC 60745-2-16)

2

Hand-held motor-operated electric tools - Safety Part 2-16: Particular requirements for tackers

SANS 60745-2-17:2003/IEC 60745-2-17:2003, IDT, Ed. 2 (SABS IEC 60745-2-17)

2

Hand-held motor-operated electric tools - Safety Part 2-17: Particular requirements for routers and trimmers

SANS 60745-2-18:2008/IEC 60745-2-18:2008, IDT, Ed. 1.1

1.01

Hand-held motor-operated electric tools - Safety Part 2-18: Particular requirements for strapping tools

SANS 60745-2-19:2006/IEC 60745-2-19:2005, IDT, Ed. 1

1

Hand-held motor-operated electric tools - Safety Part 2-19: Particular requirements for jointers

SANS 60745-2-20:2009/IEC 60745-2-20:2008, IDT, Ed. 1.1

1.01

Hand-held motor-operated electric tools - Safety Part 2-20: Particular requirements for band saws

SANS 60745-2-21:2010/IEC 60745-2-21:2008, IDT, Ed. 1.1

1.01

Hand-held motor-operated electric tools - Safety Part 2-21: Particular requirements for drain cleaners

SANS 60751:1983/IEC 60751:1983, IDT, Ed. 1 (SABS IEC 60751)

1

Industrial platinum resistance thermometer sensors

SANS 60754-1:1994/IEC 60754-1:1994, IDT, Ed. 2

1

Test on gases evolved during combustion of materials from cables Part 1: Determination of the amount of halogen acid gas

(SABS IEC 60754-1)

Page 289

Standards available in electronic format (PDF) May

SANS Number SANS 60754-2:1991/IEC 60754-2:1991, IDT, Ed. 1 (SABS IEC 60754-2)

2010

Edition Title 1

Test on gases evolved during combustion of materials from cables Part 2: Determination of degree of acidity of gases by measuring pH and conductivity

SANS 60793-1-1:2008/IEC 60793-1-1:2008, IDT, Ed. 3 3 (SABS IEC 60793-1-1)

Optical fibres Part 1-1: Measurement methods and test procedures - General and guidance

SANS 60793-1-20:2002/IEC 60793-1-20:2001, IDT, Ed. 1

1

Optical fibres Part 1-20: Measurement methods and test procedures - Fibre geometry

SANS 60793-1-21:2001/IEC 60793-1-21:2001, IDT, Ed. 1 (SABS IEC 60793-1-21)

1

Optical fibres Part 1-21: Measurement methods and test procedures - Coating geometry

SANS 60793-1-22:2001/IEC 60793-1-22:2001, IDT, Ed. 1 (SABS IEC 60793-1-22)

1

Optical fibres Part 1-22: Measurement methods and test procedures - Length measurement

SANS 60793-1-30:2001/IEC 60793-1-30:2001, IDT, Ed. 1 (SABS IEC 60793-1-30)

1

Optical fibres Part 1-30: Measurement methods and test procedures - Fibre proof test

SANS 60793-1-31:2001/IEC 60793-1-31:2001, IDT, Ed. 1 (SABS IEC 60793-1-31)

1

Optical fibres Part 1-31: Measurement methods and test procedures - Tensile strength

SANS 60793-1-32:2001/IEC 60793-1-32:2001, IDT, Ed. 1 (SABS IEC 60793-1-32)

1

Optical fibres Part 1-32: Measurement methods and test procedures - Coating strippability

SANS 60793-1-33:2001/IEC 60793-1-33:2001, IDT, Ed. 1 (SABS IEC 60793-1-33)

1

Optical fibres Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility

SANS 60793-1-34:2006/IEC 60793-1-34:2006, IDT, Ed. 2 (SABS IEC 60793-1-34)

2

Optical fibres Part 1-34: Measurement methods and test procedures - Fibre curl

SANS 60793-1-40:2001/IEC 60793-1-40:2001, IDT, Ed. 1 (SABS IEC 60793-1-40)

1

Optical fibres Part 1-40: Measurement methods and test procedures - Attenuation

SANS 60793-1-41:2006/IEC 60793-1-41:2003, IDT, Ed. 2 (SABS IEC 60793-1-41)

2

Optical fibres Part 1-41: Measurement methods and test procedures - Bandwidth

SANS 60793-1-42:2008/IEC 60793-1-42:2007, IDT, Ed. 2 (SABS IEC 60793-1-42)

2

Optical fibres Part 1-42: Measurement methods and test procedures - Chromatic dispersion

SANS 60793-1-43:2001/IEC 60793-1-43:2001, IDT, Ed. 1 (SABS IEC 60793-1-43)

1

Optical fibres Part 1-43: Measurement methods and test procedures - Numerical aperture

SANS 60793-1-44:2001/IEC 60793-1-44:2001, IDT, Ed. 1 (SABS IEC 60793-1-44)

1

Optical fibres Part 1-44: Measurement methods and test procedures - Cut-off wavelength

SANS 60793-1-45:2001/IEC 60793-1-45:2001, IDT, Ed. 1 (SABS IEC 60793-1-45)

1

Optical fibres Part 1-45: Measurement methods and test procedures - Mode field diameter

SANS 60793-1-46:2001/IEC 60793-1-46:2001, IDT, Ed. 1 (SABS IEC 60793-1-46)

1

Optical fibres Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance

Page 290

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60793-1-47:2009/IEC 60793-1-47:2009, IDT, Ed. 3 (SABS IEC 60793-1-47)

3

Optical fibres Part 1-47: Measurement methods and test procedures - Macrobending loss

SANS 60793-1-48:2007/IEC 60793-1-48:2007, IDT, Ed. 2

2

Optical fibres Part 1-48: Measurement methods and test procedures - Polarization mode dispersion

SANS 60793-1-49:2006/IEC 60793-1-49:2006, IDT, Ed. 2

2

Optical fibres Part 1-49: Measurement methods and test procedures - Differential mode delay

SANS 60793-1-50:2001/IEC 60793-1-50:2001, IDT, Ed. 1 (SABS IEC 60793-1-50)

1

Optical fibres Part 1-50: Measurement methods and test procedures - Damp heat (steady state)

SANS 60793-1-51:2001/IEC 60793-1-51:2001, IDT, Ed. 1 (SABS IEC 60793-1-51)

1

Optical fibres Part 1-51: Measurement methods and test procedures - Dry heat

SANS 60793-1-52:2001/IEC 60793-1-52:2001, IDT, Ed. 1 (SABS IEC 60793-1-52)

1

Optical fibres Part 1-52: Measurement methods and test procedures - Change of temperature

SANS 60793-1-53:2001/IEC 60793-1-53:2001, IDT, Ed. 1 (SABS IEC 60793-1-53)

1

Optical fibres Part 1-53: Measurement methods and test procedures - Water immersion

SANS 60793-1-54:2004/IEC 60793-1-54:2003, IDT, Ed. 1

1

Optical fibres Part 1-54: Measurement methods and test procedures - Gamma irradiation

SANS 60793-2:2008/IEC 60793-2:2007, IDT, Ed. 6

4

Optical fibres Part 2: Product specifications General

SANS 60793-2-10:2008/IEC 60793-2-10:2007, IDT, Ed. 3

3

Optical fibres Part 2-10: Product specifications Sectional specification for category A1 multimode fibres

SANS 60793-2-20:2008/IEC 60793-2-20:2007, IDT, Ed. 2

2

Optical fibres Part 2-20: Product specifications Sectional specification for category A2 multimode fibres

SANS 60793-2-30:2008/IEC 60793-2-30:2007, IDT, Ed. 2

2

Optical fibres Part 2-30: Product specifications Sectional specification for category A3 multimode fibres

SANS 60793-2-40:2009/IEC 60793-2-40:2009, IDT, Ed. 3

3

Optical fibres Part 2-40: Product specifications Sectional specification for category A4 multimode fibres

SANS 60793-2-50:2008/IEC 60793-2-50:2008, IDT, Ed. 3

3

Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres

(SABS IEC 60793-2)

SANS 60794-1-1:2001/IEC 60794-1-1:2001, IDT, Ed. 2 2 (SABS IEC 60794-1-1)

Optical fibre cables Part 1-1: Generic specification General

SANS 60794-1-2:2003/IEC 60794-1-2:2003, IDT, Ed. 2 2 (SABS IEC 60794-1-2)

Optical fibre cables Part 1-2: Generic specification Basic optical cable test procedures

SANS 60794-2-10:2006/IEC 60794-2-10:2003, IDT, Ed. 1

1

Optical fibre cables Part 2-10: Indoor cables - Family specification for simplex and duplex cables

Page 291

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60794-2-11:2006/IEC 60794-2-11:2005, IDT, Ed. 1

1

Optical fibre cables Part 2-11: Indoor cables Detailed specification for simplex and duplex cables for use in premises cabling

SANS 60794-2-20:2009/IEC 60794-2-20:2008, IDT, Ed. 2

2

Optical fibre cables Part 2-20: Indoor cables - Family specification for multi-fibre optical distribution cables

SANS 60794-2-21:2006/IEC 60794-2-21:2005, IDT, Ed. 1

1

Optical fibre cables Part 2-21: Indoor cables Detailed specification for multi-fibre optical distribution cables for use in premises cabling

SANS 60794-2-30:2009/IEC 60794-2-30:2008, IDT, Ed. 2

2

Optical fibre cables Part 2-30: Indoor cables - Family specification for ribbon cables

SANS 60794-2-31:2006/IEC 60794-2-31:2005, IDT, Ed. 1

1

Optical fibre cables Part 2-31: Indoor cables Detailed specification for optical fibre ribbon cables for use in premises cabling

SANS 60794-2-40:2009/IEC 60794-2-40:2008, IDT, Ed. 2

2

Optical fibre cables Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables

SANS 60794-2-50:2008/IEC 60794-2-50:2008, IDT, Ed. 1

1

Optical fibre cables Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies

SANS 60794-2:2003/IEC 60794-2:2002, IDT, Ed. 3

2

Optical fibre cables Part 2: Indoor cables - Sectional specification

SANS 60794-3:2001/IEC 60794-3:2001, IDT, Ed. 3 (SABS IEC 60794-3)

3

Optical fibre cables Part 3: Sectional specification Outdoor cables

SANS 60794-3-10:2009/IEC 60794-3-10:2009, IDT, Ed. 2

2

Optical fibre cables Part 3-10: Outdoor cables Family specification for duct, directly buried and lashed aerial optical telecommunication cables

SANS 60794-3-11:2008/IEC 60794-3-11:2007, IDT, Ed. 1

1

Optical fibre cables Part 3-11: Outdoor cables Detailed specification for duct and directly buried single-mode optical fibre telecommunication cables

SANS 60794-3-12:2006/IEC 60794-3-12:2005, IDT, Ed. 1

1

Optical fibre cables Part 3-12: Outdoor cables Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling

SANS 60794-3-20:2003/IEC 60794-3-20:2002, IDT, Ed. 1

1

Optical fibre cables Part 3-20: Outdoor cables Family specification for optical self-supporting aerial telecommunication cables

SANS 60794-3-21:2006/IEC 60794-3-21:2005, IDT, Ed. 1

1

Optical fibre cables Part 3-21: Outdoor cables Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling

SANS 60794-4:2004/IEC 60794-4:2003, IDT, Ed. 1

1

Optical fibre cables Part 4: Sectional specification Aerial optical cables along electrical power lines

SANS 60794-5:2007/IEC 60794-5:2006, IDT, Ed. 1

1

Optical fibre cables Part 5: Sectional specification Microduct cabling for installation by blowing

SANS 60799:2007/IEC 60799:1998, IDT, Ed. 2

1

Electrical accessories - Cord sets and interconnection cord sets

(SABS IEC 60794-2)

Page 292

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60811-1-1:2001/IEC 60811-1-1:2001, IDT, Ed. 1.01 2.1 (SABS IEC 60811-1-1)

Common test methods for insulating and sheathing materials of electric cables and optical cables Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties

SANS 60811-1-2:1985/IEC 60811-1-2:1985, IDT, Ed. 1 1 (SABS IEC 60811-1-2)

Common test methods for insulating and sheathing materials of electric and optical cables Part 1: Methods for general application Section 2: Thermal ageing methods

SANS 60811-1-3:2001/IEC 60811-1-3:2001, IDT, Ed. 2.01 2.1 (SABS IEC 60811-1-3)

Common test methods for insulating and sheathing materials of electric and optical cables Part 1-3: General application - Methods for determining the density - Water absorption tests - Shrinkage test

SANS 60811-1-4:1985/IEC 60811-1-4:1985, IDT, Ed. 1 1 (SABS IEC 60811-1-4)

Common test methods for insulating and sheathing materials of electric and optical cables Part 1-4: Methods for general application - Test at low temperature

SANS 60811-2-1:2003/IEC 60811-2-1:2001, IDT, Ed. 2.01 2.1 (SABS IEC 60811-2-1)

Common test methods for insulating and sheathing materials of electric and optical cables Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests

SANS 60811-3-1:1985/IEC 60811-3-1:1985, IDT, Ed. 1 1 (SABS IEC 60811-3-1)

Common test methods for insulating and sheathing materials of electric cables Part 3: Methods specific to PVC compounds Section 1 - Pressure test at high temperature - Tests for resistance to cracking

SANS 60811-3-2:1985/IEC 60811-3-2:1985, IDT, Ed. 1 1 (SABS IEC 60811-3-2)

Common test methods for insulating and sheathing materials of electric cables Part 3-2: Methods specific to PVC compounds - Loss of mass test Thermal stability test

SANS 60811-4-1:2004/IEC 60811-4-1:2004, IDT, Ed. 2 2 (SABS IEC 60811-4-1)

Insulating and sheathing materials of electric and optical cables - Common test methods Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index Carbon black and/or mineral filler content measurement in polyethylene by direct combustion Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope

SANS 60811-4-2:2004/IEC 60811-4-2:2004, IDT, Ed. 2 2 (SABS IEC 60811-4-2)

Insulating and sheathing materials of electric and optical cables - Common test methods Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation

SANS 60811-5-1:2004/IEC 60811-5-1:2004, IDT, Ed. 1.01 1.1 (SABS IEC 60811-5-1)

Insulating and sheathing materials of electric and optical cables - Common test methods Part 5-1: Methods specific to filling compounds - Drop-point Separation of oil - Lower temperature brittleness Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C

Page 293

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60815-1:2009/IEC/TS 60815-1:2008, IDT, Ed. 1

1

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 1: Definitions, information and general principles

SANS 60815-2:2009/IEC/TS 60815-2:2008, IDT, Ed. 1

1

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 2: Ceramic and glass insulators for a.c. systems

SANS 60815-3:2009/IEC/TS 60815-3:2008, IDT, Ed. 1

1

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 3: Polymer insulators for a.c. systems

SANS 60832:2006/IEC 60832:1988, IDT, Ed. 1

1

Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working

SANS 60838-1:2008/IEC 60838-1:2008, IDT, Ed. 4.1

1.01

Miscellaneous lampholders Part 1: General requirements and tests

SANS 60838-2-2:2006/IEC 60838-2-2:2006, IDT, Ed. 1 1

Miscellaneous lampholders Part 2-2: Particular requirements - Connectors for LED-modules

SANS 60839-1-1:2007/IEC 60839-1-1:1988, IDT, Ed. 1 1

Alarm systems Part 1: General requirements Section One: General

SANS 60839-1-2:2007/IEC 60839-1-2:1987, IDT, Ed. 1 1

Alarm systems Part 1: General requirements Section Two: Power units, test methods and performance criteria

SANS 60839-1-3:2007/IEC 60839-1-3:1988, IDT, Ed. 1 1

Alarm systems Part 1: General requirements Section Three: Environmental testing

SANS 60839-2-2:2007/IEC 60839-2-2:1987, IDT, Ed. 1 1

Alarm systems Part 2: Requirements for intruder alarm systems Section Two: Requirements for detectors - General

SANS 60839-2-3:2010/IEC 60839-2-3:1987, IDT, Ed. 1 1

Alarm systems Part 2: Requirements for intruder alarm systems Section Three: Requirements for infrared-beam interruption detectors in buildings

SANS 60839-2-4:2010/IEC 60839-2-4:1990, IDT, Ed. 1 1

Alarm systems Part 2: Requirements for intruder alarm systems Section 4: Ultrasonic Doppler detectors for use in buildings

SANS 60839-2-5:2010/IEC 60839-2-5:1990, IDT, Ed. 1 1

Alarm systems Part 2: Requirements for intruder alarm systems Section 5: Microwave Doppler detectors for use in buildings

SANS 60839-2-6:2010/IEC 60839-2-6:1990, IDT, Ed. 1 1

Alarm systems Part 2: Requirements for intruder alarm systems Section 6: Passive infra-red detectors for use in buildings

SANS 60839-2-7:1994/IEC 60839-2-7:1994, IDT, Ed. 1 1 (SABS IEC 60839-2-7)

Alarm systems Part 2: Requirements for intruder alarm systems Section 7: Passive glass-break detectors for use in buildings

SANS 60840:2006/IEC 60840:2004, IDT, Ed. 3

1

Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements

SANS 60851-1:1996/IEC 60851-1:1996, IDT, Ed. 2 (SABS IEC 60851-1)

1

Winding wires - Test methods Part 1: General

Page 294

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60851-2:2004/IEC 60851-2:1997, IDT, Ed. 2.1 (SABS IEC 60851-2)

1.01

Winding wires - Test methods Part 2: Determination of dimensions

SANS 60851-3:2009/IEC 60851-3:2009, IDT, Ed. 3

2

Winding wires - Test methods Part 3: Mechanical properties

SANS 60851-4:2006/IEC 60851-4:2005, IDT (SABS IEC 60851-4)

2.02

Winding wires - Test methods Part 4: Chemical properties

SANS 60851-5:2009/IEC 60851-5:2008, IDT, Ed. 4

2

Winding wires - Test methods Part 5: Electrical properties

SANS 60851-6:1996/IEC 60851-6:1996, IDT, Ed. 2 (SABS IEC 60851-6)

1

Winding wires - Test methods Part 6: Thermal properties

SANS 60864-1:1986/IEC 60864-1:1986, IDT, Ed. 1

1

Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment Part 1: Interface standards for systems using dedicated interconnections

1

Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment Part 2: Interface standards for systems using data bus type interconnections

SANS 60865-1:2006/IEC 60865-1:1993, IDT, Ed. 2

1

Short-circuit currents - Calculation of effects Part 1: Definitions and calculation methods

SANS 60865-2:2008/IEC/TR 60865-2:1994, IDT, Ed. 1

1

Short-circuit currents - Calculation of effects Part 2: Examples of calculation

SANS 60869-1:1999/IEC 60869-1:1999, IDT, Ed. 3

1

Fibre optic attenuators Part 1: Generic specification

3

Connectors for optical fibres and cables Part 1: Generic specification

(SABS IEC 60851-3)

(SABS IEC 60851-5)

(SABS IEC 60864-1)

SANS 60864-2:1997/IEC 60864-2:1997, IDT, Ed. 1 (SABS IEC 60864-2)

(SABS IEC 60869-1) SANS 60874-1:2007/IEC 60874-1:2006, IDT, Ed. 5 (SABS IEC 60874-1)

SANS 60874-1-1:2007/IEC 60874-1-1:2006, IDT, Ed. 2 2 (SABS IEC 60874-1-1)

Connectors for optical fibres and cables Part 1-1: Blank detail specification

SANS 60874-14-1:1997/IEC 60874-14-1:1997, IDT, Ed. 1 (SABS IEC 60874-14-1)

1

Connectors for optical fibres and cables Part 14-1: Detail specification for fibre optic connector type SCPC standard terminated to multimode fibre type A1a, A1b

SANS 60874-14-2:1997/IEC 60874-14-2:1997, IDT, Ed. 1 (SABS IEC 60874-14-2)

1

Connectors for optical fibres and cables Part 14-2: Detail specification for fibre optic connector type SCPC tuned terminated to single-mode fibre type B1

SANS 60874-19-2:1999/IEC 60874-19-2:1999, IDT, Ed. 1 (SABS IEC 60874-19-2)

1

Connectors for optical fibres and cables Part 19-2: Fibre optic adaptor (duplex) type SC for single-mode fibre connectors - Detail specification

SANS 60884-1:2006/IEC 60884-1:2006, IDT, Ed. 3.1 (SABS IEC 60884-1)

2.01

Plugs and socket-outlets for household and similar purposes Part 1: General requirements

SANS 60884-2-2:2007/IEC 60884-2-2:2006, IDT, Ed. 2 2 (SABS IEC 60884-2-2)

Plugs and socket-outlets for household and similar purposes Part 2-2: Particular requirements for socket-outlets for appliances

SANS 60884-2-3:2007/IEC 60884-2-3:2006, IDT, Ed. 2 2 (SABS IEC 60884-2-3)

Plugs and socket-outlets for household and similar purposes Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations

Page 295

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60884-2-4:2008/IEC 60884-2-4:2007, IDT, Ed. 3 3 (SABS IEC 60884-2-4)

Plugs and socket-outlets for household and similar purposes Part 2-4: Particular requirements for plugs and socket-outlets for SELV

SANS 60884-2-5:1995/IEC 60884-2-5:1995, IDT, Ed. 1 1 (SABS IEC 60884-2-5)

Plugs and socket-outlets for household and similar purposes Part 2-5: Particular requirements for adaptors

SANS 60884-2-6:1997/IEC 60884-2-6:1997, IDT, Ed. 1 1 (SABS IEC 60884-2-6)

Plugs and socket-outlets for household and similar purposes Part 2: Particular requirements for switched socket-outlets with interlock for fixed electrical installations

SANS 60890:2007/IEC 60890:1987, IDT, Ed. 1

1

A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear

SANS 60896-11:2003/IEC 60896-11:2002, IDT, Ed. 1 1

Stationary lead-acid batteries Part 11: Vented types - General requirements and methods of test

SANS 60896-21:2004/IEC 60896-21:2004, IDT, Ed. 1 1

Stationary lead-acid batteries Part 21: Valve regulated types - Methods of test

SANS 60896-22:2004/IEC 60896-22:2004, IDT, Ed. 1 1

Stationary lead-acid batteries Part 22: Valve regulated types - Requirements

SANS 60900:2006/IEC 60900:2004, IDT, Ed. 2

1

Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.

SANS 60901:2008/IEC 60901:2008, IDT, Ed. 2.4

2.04

Single-capped fluorescent lamps - Performance specifications

SANS 60903:2005/IEC 60903:2002, IDT, Ed. 2 (SABS IEC 60903)

2

Live working - Gloves of insulating material

SANS 60906-3:1994/IEC 60906-3:1994, IDT, Ed. 1

1

IEC system of plugs and socket-outlets for household and similar purposes Part 3: SELV plugs and socket-outlets, 16 A 6 V, 12 V, 24 V, 48 V, a.c and d.c

2.01

Ballasts for tubular fluorescent lamps - Performance requirements

SANS 60923:2007/IEC 60923:2006, IDT, Ed. 3.1 (SABS IEC 60923)

3.01

Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements

SANS 60925:2001/IEC 60925:2001, IDT, Ed. 1.2

1.02

DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

SANS 60927:2007/IEC 60927:2007, IDT, Ed. 3 (SABS IEC 60927)

3

Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements

SANS 60929:2006/IEC 60929:2006, IDT, Ed. 3

3

AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

SANS 60934:2007/IEC 60934:2007, IDT, Ed. 3.1 (SABS IEC 60934)

2.01

Circuit-breakers for equipment (CBE)

SANS 60939-1:2007/IEC 60939-1:2005, IDT, Ed. 2

2

Passive filter units for electromagnetic interference suppression Part 1: Generic specification

2

Electroacoustics - Sound calibrators

(SABS IEC 60901)

(SABS IEC 60906-3)

SANS 60921:2006/IEC 60921:2006, IDT, Ed. 2.1 (SABS IEC 60921)

(SABS IEC 60925)

(SABS IEC 60929)

(SABS IEC 60939-1) SANS 60942:2003/IEC 60942:2003, IDT, Ed. 3 (SABS IEC 60942)

Page 296

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60947-1:2008/IEC 60947-1:2007, IDT, Ed. 5 (SABS IEC 60947-1)

5

Low-voltage switchgear and controlgear Part 1: General rules

SANS 60947-2:2009/IEC 60947-2:2009, IDT, Ed. 4.1

4.01

Low-voltage switchgear and controlgear Part 2: Circuit-breakers

SANS 60947-3:2009/IEC 60947-3:2008, IDT, Ed. 3 (SABS IEC 60947-3)

3

Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

SANS 60947-4-1:2004/IEC 60947-4-1:2002, IDT, Ed. 2.01 2.1 (SABS IEC 60947-4-1)

Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

SANS 60947-4-2:2007/IEC 60947-4-2:2007, IDT, Ed. 2.02 2.2 (SABS IEC 60947-4-2)

Low-voltage switchgear and controlgear Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters

SANS 60947-4-3:2007/IEC 60947-4-3:2007, IDT, Ed. 1.01 1.1 (SABS IEC 60947-4-3)

Low-voltage switchgear and controlgear Part 4-3: Contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads

SANS 60947-5-1:2010/IEC 60947-5-1:2009, IDT, Ed. 3.01 3.1 (SABS IEC 60947-5-1)

Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements Electromechanical control circuit devices

SANS 60947-5-2:2008/IEC 60947-5-2:2007, IDT, Ed. 3 3 (SABS IEC 60947-5-2)

Low-voltage switchgear and controlgear Part 5-2: Control circuit devices and switching elements Proximity switches

SANS 60947-5-3:2005/IEC 60947-5-3:2005, IDT, Ed. 1.01 1.1 (SABS IEC 60947-5-3)

Low-voltage switchgear and controlgear Part 5-3: Control circuit devices and switching elements Requirements for proximity devices with defined behaviour under fault conditions (PDF)

SANS 60947-5-4:2003/IEC 60947-5-4:2002, IDT, Ed. 2 2 (SABS IEC 60947-5-4)

Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements Method of assessing the performance of low-energy contacts - Special tests

SANS 60947-5-5:2005/IEC 60947-5-5:2005, IDT, Ed. 1.01 1.1 (SABS IEC 60947-5-5)

Low-voltage switchgear and controlgear Part 5-5: Control circuit devices and switching elements Electrical emergency stop device with mechanical latching function

SANS 60947-5-6:1999/IEC 60947-5-6:1999, IDT, Ed. 1 1 (SABS IEC 60947-5-6)

Low-voltage switchgear and controlgear Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)

SANS 60947-5-7:2003/IEC 60947-5-7:2003, IDT, Ed. 1 1

Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements Requirements for proximity devices with analogue output

SANS 60947-5-8:2007/IEC 60947-5-8:2006, IDT, Ed. 1 1

Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements Three position enabling switches

SANS 60947-5-9:2007/IEC 60947-5-9:2006, IDT, Ed. 1 1

Low-voltage switchgear and controlgear Part 5-9: Control circuit devices and switching elements Flow rate switches

SANS 60947-6-1:2006/IEC 60947-6-1:2005, IDT, Ed. 2 2 (SABS IEC 60947-6-1)

Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment - Transfer switching equipment

Page 297

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60947-6-2:2007/IEC 60947-6-2:2007, IDT, Ed. 2.01 2.1 (SABS IEC 60947-6-2)

Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

SANS 60947-7-1:2009/IEC 60947-7-1:2009, IDT, Ed. 3 3 (SABS IEC 60947-7-1)

Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment - Terminal blocks for copper conductors

SANS 60947-7-2:2009/IEC 60947-7-2:2009, IDT, Ed. 3 3 (SABS IEC 60947-7-2)

Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

SANS 60947-7-3:2009/IEC 60947-7-3:2009, IDT, Ed. 2 2

Low-voltage switchgear and controlgear Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks

SANS 60947-8:2007/IEC 60947-8:2006, IDT, Ed. 1.1

1.01

Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

SANS 60950-1:2010/IEC 60950-1:2005, IDT, Ed. 2

2

Information technology equipment - Safety Part 1: General requirements

SANS 60968:2006/IEC 60968:1999, IDT, Ed. 1.2

1.02

Self-ballasted lamps for general lighting services Safety requirements

SANS 60969:2010/IEC 60969:2001, MOD, Ed. 1.2

1

Self-ballasted lamps for general lighting services Performance requirements

SANS 60974-1:2003/IEC 60974-1:2000, IDT, Ed. 2.1

1.01

Arc welding equipment Part 1: Welding power sources

SANS 60974-2:2009/IEC 60974-2:2007, IDT, Ed. 2

1

Arc welding equipment Part 2: Liquid cooling systems

SANS 60974-3:2009/IEC 60974-3:2007, IDT, Ed. 2

1

Arc welding equipment Part 3: Arc striking and stabilizing devices

SANS 60974-5:2009/IEC 60974-5:2007, IDT, Ed. 2

1

Arc welding equipment Part 5: Wire feeders

SANS 60974-6:2009/IEC 60974-6:2003, IDT, Ed. 1

1

Arc welding equipment Part 6: Limited duty manual metal arc welding power sources

SANS 60974-7:2006/IEC 60974-7:2005, IDT, Ed. 2 (SABS IEC 60974-7)

2

Arc welding equipment Part 7: Torches

(SABS IEC 60974-1)

SANS 60974-11:2005/IEC 60974-11:2004, IDT, Ed. 2 2

Arc welding equipment Part 11: Electrode holders

(SABS IEC 60974-11) SANS 60974-12:2007/IEC 60974-12:2005, IDT, Ed. 2 2 (SABS IEC 60974-12)

Arc welding equipment Part 12: Coupling devices for welding cables

SANS 60998-1:2006/IEC 60998-1:2002, IDT, Ed. 2

Connecting devices for low-voltage circuits for household and similar purposes Part 1: General requirements

1

SANS 60998-2-1:2006/IEC 60998-2-1:2002, IDT, Ed. 1 2

Connecting devices for low-voltage circuits for household and similar purposes Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units

SANS 60998-2-2:2006/IEC 60998-2-2:2002, IDT, Ed. 1 2

Connecting devices for low-voltage circuits for household and similar purposes Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units

Page 298

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 60998-2-3:2006/IEC 60998-2-3:2002, IDT, Ed. 1 2

Connecting devices for low-voltage circuits for household and similar purposes Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units

SANS 60998-2-4:2006/IEC 60998-2-4:2004, IDT, Ed. 1 2

Connecting devices for low-voltage circuits for household and similar purposes Part 2-4: Particular requirements for twist-on connecting devices

SANS 61000-1-1:1992/IEC 61000-1-1:1992, IDT, Ed. 1 1 (SABS IEC 61000-1-1)

Electromagnetic compatibility (EMC) Part 1: General Section 1: Application and interpretation of fundamental definitions and terms

SANS 61000-1-2:2009/IEC TS 61000-1-2:2008, IDT, Ed. 2

2

Electromagnetic compatibility (EMC) Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena

SANS 61000-1-3:2006/IEC/TR 61000-1-3:2002, IDT, Ed. 1

1

Electromagnetic compatibility (EMC) Part 1-3: General - The effects of high-altitude EMP (HEMP) on civil equipment and systems

SANS 61000-1-5:2006/IEC 61000-1-5:2004, IDT, Ed. 1 1

Electromagnetic compatibility (EMC) Part 1-5: General - High power electromagnetic (HPEM) effects on civil systems

SANS 61000-2-1:2006/IEC 61000-2-1:1990, IDT, Ed. 1 1

Electromagnetic compatibility (EMC) Part 2: Environment Section 1: Description of the environment - Electromagnetic environment for lowfrequency conducted disturbances and signalling in public power supply systems

SANS 61000-2-2:2002/IEC 61000-2-2:2002, IDT, Ed. 2 2 (SABS IEC 61000-2-2)

Electromagnetic compatibility (EMC) Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public lowvoltage power supply systems

SANS 61000-2-3:2007/IEC 61000-2-3:1992, IDT, Ed. 1 1

Electromagnetic compatibility (EMC) Part 2: Environment Section 3: Description of the environment - Radiated and non-network-frequencyrelated conducted phenomena

SANS 61000-2-4:2003/IEC 61000-2-4:2002, IDT, Ed. 1 2

Electromagnetic compatibility (EMC) Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances

SANS 61000-2-5:1995/IEC 61000-2-5:1995, IDT, Ed. 1 1 (SABS IEC 61000-2-5)

Electromagnetic compatibility (EMC) Part 2: Environment Section 5: Classification of electromagnetic environments - Basic EMC publication

SANS 61000-2-6:1995/IEC 61000-2-6:1995, IDT, Ed. 1 1 (SABS IEC 61000-2-6)

Electromagnetic compatibility (EMC) Part 2: Environment Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances

SANS 61000-2-7:1998/IEC 61000-2-7:1998, IDT, Ed. 1 1 (SABS IEC 61000-2-7)

Electromagnetic compatibility (EMC) Part 2: Environment Section 7: Low frequency magnetic fields in various environments

SANS 61000-2-9:2007/IEC 61000-2-9:1996, IDT, Ed. 1 1

Electromagnetic compatibility (EMC) Part 2: Environment Section 9: Description of HEMP environment - Radiated disturbance - Basic EMC publication

SANS 61000-2-10:2007/IEC 61000-2-10:1998, IDT, Ed. 1

Electromagnetic compatibility (EMC) Part 2-10: Environment - Description of HEMP environment Conducted disturbance

1

Page 299

Standards available in electronic format (PDF) May

SANS Number

2010

Edition Title

SANS 61000-2-11:2006/IEC 61000-2-11:1999, IDT, Ed. 1

1

Electromagnetic compatibility (EMC) Part 2-11: Environment - Classification of HEMP environments

SANS 61000-2-12:2005/IEC 61000-2-12:2003, IDT, Ed. 1

1

Electromagnetic compatibility (EMC) Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems

SANS 61000-2-13:2007/IEC 61000-2-13:2005, IDT, Ed. 1

1

Electromagnetic compatibility (EMC) Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted

SANS 61000-3-2:2009/IEC 61000-3-2:2009, IDT, Ed. 3.02 3.2 (SABS IEC 61000-3-2)

Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current
View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF