December 19, 2016 | Author: Biswajit Mohanty | Category: N/A
CONNECTORS • JUMPER CABLES EMP & GROUNDING • CABLE CLAMPS POWER SPLITTERS & TAPPERS COMBINERS • ABSORBERS • REPEATERS ACTIVE DAS • PASSIVE DAS • ANTENNAS
CONTENTS
SALES OFFICE Leax Arkivator Telecom AB Stridsvagnsvägen 14 SE-291 39 Kristianstad, Sweden PHONE: +46 (0) 8 752 02 20
INTRODUCTION
CONNECTORS
FEEDER & JUMPER CABLES
EMP & GROUNDING
INFO & ORDER:
[email protected] WEB: www.leax.com
CABLE CLAMPS PASSIVES
COMBINERS
Ordering products from Leax Arkivator Telecom is easy. Orders can be placed directly via telephone or e-mail. Visit Leax Arkivator Telecom´s website for updated product specifications, mounting descriptions and much more.
REPEATERS
REPEATER ANTENNAS
INDOOR ANTENNAS
While all efforts have been made to provide accurate specifications at time of printing, Leax Arkivator Telecom AB is not responsible for any errors or omissions in this catalogue. All specifications are subject to change without prior notice and neither Leax Arkivator Telecom AB nor its employees may be held responsible for discrepancies between the printed specifications and those actually in effect at any given time. Please check actual specifications at www. arkivator.se before ordering. © Leax Arkivator Telecom AB, Sweden All rights reserved. 2014 Leax Arkivator Telecom AB. Leax Arkivator Telecom AB P +46 8 752 02 20
[email protected]
www.leax.com
3
Introduction and General Information
Leax Arkivator Telecom LEAX Arkivator Telecom AB is a global technology supplier servicing the coaxial and RF industry in both the broadcasting and telecom sectors. Our focus is to develop and manufacture the most innovative, dependable and long-lasting products on the market.
Building on tradition
Our Philosophy
At LEAX Arkivator Telecom, our focus is on the development and manu-
Modern communication places great demands on the systems that pro-
facture of innovative, long-lasting RF products offering superior reli-
cess the information being exchanged throughout the world. It goes
ability and performance at a reasonable price for the worldwide market.
without saying that these systems must be built with reliable products.
Previously Teracom Components, we became Exir Telecom in 2008
When developing new technology it is of the utmost importance to un-
after becoming part of the Exir Group. Though the brand names are
derstand how this technology will be integrated into our everyday lives.
new, our products continue to be built with experience and tradition
And to understand this, we must be close to the people who use it. It is
stretching back to the first RF infrastructures to be built in Sweden.
from this perspective that we view evolving technologies. We stay close to our customers, the universities, the technicians using our products,
Today our position on the worldwide market continues to grow stronger
and to those using our customers’ own innovations on a daily basis. Only
thanks to the extensive production knowledge and manufacturing ca-
with a clear understanding of the ultimate aim of the technology can we
pacity available to us as part of the Exir / Arkivator Group now owned
build the finest quality products available.
by the LEAX Group.
Trusted around the world
Where new ideas come first
At LEAX Arkivator Telecom we work together with major international
LEAX Arkivator telecom invests heavily in time and costs the develop-
operators, system suppliers and cable manufacturers who have used our
ment of new ideas and products that will improve the quality and reliabil-
products ever since the telecom boom. These companies trust the per-
ity of the world’s telecom systems. An excellent example is the first ever
formance our products deliver, and we are dedicated to maintaining their
easy-to-use, single piece connector that we introduced back in 1998, an
confidence while creating new, high quality products. The single piece
innovation that revolutionized the market. By studying problems on-site
connector and our market leading built-in weatherproofing system are
together with installers, our experienced R&D engineers excel at develop-
examples of designs that save telecom customers money while provid-
ing products that simplify installation, improve performance and enhance
ing long-term system stability.
overall system reliability.
4
Leax Arkivator Telecom AB
P +46 8 752 02 20
[email protected]
www.leax.com
Unbeatable quality and advantages with Exir Telecom branded components. Having been around since long before the dawn of modern telecommunications, The Exir Telecom brand offers the benefit of farreaching experience and in-depth knowledge.
Unrivalled Industry knowledge with LEAX Arkivator Telecom products. As a customer you can benefit from our knowledge of sourcing and manufacturing within the telecoms sector. LEAX Arkivator Telecom offers the chance to establish a channel for service, good quality and cost saving solutions.
Leax Arkivator Telecom AB P +46 8 752 02 20
[email protected]
www.leax.com
5
Reliable Connector Design Design Features for Preventing Intermodulation 1
SILVER-PLATED CONTACT SURFACES
3
All contact surfaces are silver-plated to achieve maximum conductivity.
2
HIGH CONTACT PRESSURE ON OUTER CONDUCTOR The connector’s mechanical construction allows great pressure to be applied to the area of contact with the cable’s outer conductor when tightened around the
VIBRATION RESISTANT CONSTRUCTION
cable. A specially designed slot keeps the outer
The double O-rings sealing the outer conductor
conductor of the cable in place.
provide added stability to protect against the wear otherwise caused by cable vibrations.
1
1
2
2
3
3
4
O-Ring Sealing for Guaranteed Water Protection 1
AT CABLE ENTRY O-ring at cable entry prevents water leakage between
3
BETWEEN CONNECTOR’S FRONT AND BACK PIECES O-ring to prevent moisture migration during installation.
connector and plastic cable jacket. 2
AROUND OUTER COPPER TUBE Double O-rings prevent leakage between connector and outer conductor.
4
INSIDE THE CONNECTOR HEAD A leaking antenna can cause damage throughout the system. O-rings at the connector head stop such water leakage and protect the rest of the system from further damage.
6
Leax Arkivator Telecom AB
P +46 8 752 02 20
[email protected]
www.leax.com
SNOW AND ICE
DUST AND SAND STORMS
HUMIDITY AND HEAVY RAIN
SALT WATER AND STRONG WINDS
HOW WE STOP WATER FROM GETTING IN With simpler products there is a sizeable risk that water and moisture will
sealing. Our products have built-in weather protection consisting of
enter into the antenna system. This can occur in various ways, the most
O-ringsmade of EPDM. These O-rings feature completely seamless
likely of which being through poorly sealed connectors, jumper cables or
surfaces, superior workability of the sealing under extreme climatic
grounding kits.
actions and very good resistance to climatic changes, ozone and UVradiation. O-rings of this type are used in the most demanding and
External sealants do not protect against moisture that migrates within
highly critical applications including nuclear power plants, military
the feeder system. Water that collects in antenna panels or amplifiers
uses and various medical equipment.
can travel down through the system if the connector interface is not waterproof. Should a crack or hole appear in the feeder cable’s plastic
As our products require no external sealing whatsoever, you will never
jacket, water will enter and travel along the outer conductor to nearby
have to worry about the unnecessary cost, time-consumption and an-
connectors. Our built-in O-ring system prevents migration of this kind
noyance of taping ever again.
from occurring inside antenna lines.
EXCEEDS IP 68 FROM THE COLDEST TO THE WARMEST CLIMATIC CONDITIONS
The International Standards IP Protection Classification established by IEC (International Electrotechnical Commission) provides a system for
Exir Telecom branded products are developed to withstand all climatic
specifying enclosures of electrical equipment on the basis of the de-
conditions. They have been designed primarily for the harsh Scandina-
gree of protection required. In order to be awarded IP68 classification
vian climate, made to function in the freezing cold of near Arctic winters.
a product must be able to withstand a water pressure of 0.1 bar for 30
Our products have been tested for performance in a variety of extreme
minutes. This corresponds to a depth one metre of water.
climatic conditions, from the coldest to the warmest temperatures and at various humidity levels. They are also proven to be dust-tight and able
Exir Telecom’s products for exposed situations have been successfully
to withstand the pressure of desert installation.
tested to withstand 2.5 bar. This means that they can safely operate at depths of 25 metres under water, which far exceeds the requirements of
Products branded Exir Telecom are designed to operate problem-free
the international IP68 standard.
for a minimum of 25 years without any maintenance or any external
Leax Arkivator Telecom AB P +46 8 752 02 20
[email protected]
www.leax.com
7
On-site Training Keeping your workforce up to date with the rapid advancements in today’s mobile telephone technology requires a commitment to continuous training. But can you afford the time it takes for installers to attend training courses when there are deadlines to be met? LEAX Arkivator Telecom recognises these pressures, which is why we have developed a series of flexible, on-site training courses designed to fit around your work schedule
EXAMPLES OF COURSES
- not ours. This increasingly popular training option minimises ’lost’ time travelling to an off-site venue, and allows installers to conveniently update their skills at their place of work even if the network is being constructed at several sites simultaneously. A typical connector
CONNECTOR INSTALLATION COURSE Basic course covering techniques for proper connector installation.
installation course lasts half a day and can accommodate up to eight participants. Our on-site training scheme is actually a series of related courses which focus on the practical aspects of working with connectors and cables. This is a vitally impor-
INTRODUCTORY COURSE This course provides introductory theory and practical training relating to such areas as planning and building fully operational antenna lines for cellular telephony.
tant area, as incorrectly installed connectors can result in major power dissipation. In simple terms, doing the job right the first time results in the highest level of cost efficiency in the long run.
HANDS-ON TRAINING FOR EVERYONE
ADVANCED COURSE This course offers an in-depth look into various aspects of RF as well as examines essential issues when planning and building fully operational antenna lines
All of our instructors have extensive ’hands-on’ experience working with mobile telephony networks in a variety of situations. This means they are capable of answering questions on both a theoretical and practical level. During our Connector Installation Course all participants are given the opportunity to install each of the connector types available in our program. Our qualified instructors are
For more detailed information regarding courses, please contact us.
on hand to answer questions and to lend a helping hand when needed. They also check each installation to ensure that it meets the required standards of workmanship. All participants receive a personalised certificate of achievement upon successful completion of our courses.
LEARN MORE AT LEAX ARKIVATOR TELECOM LEAX Arkivator Telecom also holds advanced, 5-day courses geared primarily to technical supervisors, purchasers and project managers.
8
Leax Arkivator Telecom AB
P +46 8 752 02 20
[email protected]
www.leax.com
Connectors Exir Telecom branded connectors offer many built-in advantages, such as an expanding inner conductor for superior electrical performance, longer body construction for reduced stress on cables, and advanced weather protection features which completely eliminate the need for putty tape or any other external weatherproofing. The LEAX range of connectors are also fully tested and suitable for less harsh environments and indoor applications. All of our products have been tested in extreme climatic conditions. Our connectors are fast and easy to install, and are fully compatible with all major cable brands.
Exir branded Connectors 1/2” Flexible Foam Dielectric 1/2” Flexible Foam Dielectric Right Angle 1/2” Foam Dielectric - Tighten Inner Conductor 1/2” Foam Dielectric Contact Springs 1/2” Foam Dielectric Right Angle 7/8” Foam Dielectric - Contact Springs 7/8” Foam Dielectric - Expanding Inner Conductor 1 1/4” Foam Dielectric 1 5/8” Foam Dielectric Tools for Foam and Superflex Connectors
LEAX branded Connectors Connector, N Male for RGC8 Connectors, N Male for 3/8” in, FS Connectors, 1/2” Foam Dielectric Connectors, 7/8” Foam Dielectric Adapter
Leax Arkivator Telecom AB P +46 8 752 02 20
[email protected]
www.leax.com
9
Connectors 1/2” Superflexible Foam Dielectric
PRODUCT FEATURES Reusable Auto-flaring for faster installation IP68-classified and water-pressure proof tested down to 25 m High quality O-rings on outer conductor and cable jacket ensure functional integrity even after accidental damage to cable jacket Designed to maintain high pressure on contact surfaces to reduce intermodulation
COMMON FOR ALL CABLE FORMAT
1/2"
CONNECTOR OPERATING FREQUENCY
0 - 7500 MHz
VSWR / RETURN LOSS
0 - 2000 MHz
1.036 / -35 dB
0 - 2500 MHz
1.065 / -30 dB
CABLE COMPATIBILITY
Acome HPL 50-1/2 SF Andrew FSJ4-50B Cablewave S-FLC 12 Condumex RF 1/2”-50 SF Eupen 5092 1/2” Hiflex Leoni FlexLine 1/2” S NK Cables RFF 1/2"-50 RFS Cellflex SCF12-50J
INTERMODULATION*
2 x 20 W transmitter
< -156 dBc
CONNECTING TIME
5 - 6 min
WEIGHT
190 g (0.42 lb)
DIAMETER
27 mm (1.06 in)
LENGTH
76 mm (2.99 in)
OPERATING TEMP.
-55 °C to +80 °C
PIECES IN BOX
25
TOOL KIT
CONK-S012-B0
NM-S012-A0
NF-S012-A0
716M-S012-A0
716F-S012-A0
ARTICLE
NM-S012-A0
NF-S012-A0
716M-S012-A0
716F-S012-A0
CONNECTOR
N male
N female
DIN 7/16 male
DIN 7/16 female
* During intermodulation measurement attached cables are exposed to shock and vibration.
10
Leax Arkivator Telecom AB
P +46 8 752 02 20
[email protected]
www.leax.com
Revision A
Connectors 1/2” Superflexible Foam Dielectric Right Angle
PRODUCT FEATURES Reusable Auto-flaring for faster installation No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m High quality O-rings on outer conductor and cable jacket ensure functional integrity even after accidental damage to cable jacket Designed to maintain high pressure on contact surfaces to reduce intermodulation
COMMON FOR ALL CABLE FORMAT
1/2"
CONNECTOR OPERATING FREQUENCY
0 - 7500 MHz
VSWR / RETURN LOSS
0 - 2000 MHz
1.036 / -35 dB
0 - 2500 MHz
1.065 / -30 dB
CABLE COMPATIBILITY
Acome HPL 50-1/2 SF Andrew FSJ4-50B Cablewave S-FLC 12 Condumex RF 1/2”-50 SF Eupen 5092 1/2” Hiflex NK Cables RFF 1/2"-50 RFS Cellflex SCF12-50J
INTERMODULATION*
2 x 20 W transmitter
