KSB Technical Datasheet

Data sheet

Customer item no.:1. Order dated: 03/12/2013 Order no.: BI-0012013-9344 Quantity: 1

Number: ES 334 Item no.: 100 Date: 03/12/2013 Page: 1 / 4 Version no.: 1

ETN 065-050-125 GB A 10GA200862B

Operating data Requested flow rate Requ Reques este ted d deve develo lope ped d head head Pumped medium

300.00 US GPM 82.0 82.00 0 ft Water  Clean water  Not containing chemical and mechanical substances which affect the materials 20.0 °C 4.0 °C 1000 kg/m³

Actual flow rate  Actual developed head Efficiency Power absorbed Pump speed of rotation NPSH required Permissible operating pressure Discharge press.

299.92 US GPM 81.96 ft 76.6 % 6.05 kW 3565 rpm 14.76 ft 16.00 bar.g

1.59 mm²/s 0.00 bar.g 18.92 kg/s 7.19 kW 60.30 US GPM

Min. allow. mass flow for  continuous stable operation Shutoff head Max. allow. mass flow Design

3.80 kg/s

Pump standard

EN 733

Design

Baseplate mounted, longcoupled Horizontal

Material code Shaft seal code Sealing plan

 Ambient air temperature Fluid temperature Fluid density Fluid viscosity Suction pressure max. Mass flow rate Max. power on curve Min. allow. flow for continuous stable operation

2.45 bar.g

96.36 ft 30.83 kg/s Single system 1 x 100 % tolerances to ISO 9906 class 3B; below 10 kW acc. to paragraph 4.4.2

Design

Orientation Suction nominal dia. Suction nominal pressure Suction position Suction flange dimension according to standard Suction flange drilled according to standard Discharge nominal dia. Disc Discha harg rge e norm normin inal al pre press ssur ure e Discharge position Discharge flange dimension according to standard. Discharge flange drilled according to standard

DN 65 PN 16 axial EN1092-2

Shaft seal Manufacturer Type

Single acting mechanical seal KSB 1

EN1092-2 DN 50 PN 16 top (0°/360°) EN1092-2 EN1092-2

Seal chamber design Contact guard

Q1Q1X4GG 10 A Single-acting mechanical seal (A-type casing cover, taper bore) Conical seal chamber (A-type cover) with

Wear ring Impeller diameter Free passage size Direction of rotation from drive Silic ilicon on free ree pum pump p as assembl embly y

Casing wear ring 123.0 mm 11.6 mm Clockwise

Bearin Bearing g brack bracket et const construc ructio tion n Bearing bracket size Bearing seal Bearing type Lubrication type Color

Water Water stand standard ard stan standar dard d 25 V ring Anti-friction bearings Grease Ultramarine blue (RAL 5002) KSB-blue

Yes

Driver, accessories Driver type Drive standard Drive supplied by Motor const. type Motor size

Electric motor   IEC with motor  B3 132S

Frequency Rated power P2 available reserve Number of poles

60 Hz kW 42.15 % 2

7.50

Data sheet

Customer item no.:1. Order dated: 03/12/2013 Order no.: BI-0012013-9344 Quantity: 1

Number: ES 334 Item no.: 100 Date: 03/12/2013 Page: 2 / 4 Version no.: 1

ETN 065-050-125 GB A 10GA200862B

Materials GB Flat gasket (400) Notes 1 Casing wear ring (502.1) Notes 2 general criteria for a water analysis: pH-value >= 7; chloride content (Cl)