KSB Movitec Type Series Booklet
March 11, 2024 | Author: Anonymous | Category: N/A
Short Description
Download KSB Movitec Type Series Booklet...
Description
High-pressure In-line Pump
Movitec 60 Hz
Type Series Booklet
Legal information/Copyright Type Series Booklet Movitec
All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any other purpose, nor otherwise transmitted, published or made available to a third party without the manufacturer's express written consent. Subject to technical modification without prior notice. © KSB Aktiengesellschaft, Frankenthal 19.05.2014
Contents
Contents High-pressure Pumps ......................................................................................................................................... 5 High-pressure In-line Pumps ..........................................................................................................................................5 Movitec ...................................................................................................................................................................... 5 Main applications ................................................................................................................................................ 5 Fluids handled ...................................................................................................................................................... 5 Operating data ....................................................................................................................................................5 Designation .......................................................................................................................................................... 5 Design details ....................................................................................................................................................... 5 Materials ..............................................................................................................................................................7 Coating and preservation ...................................................................................................................................7 Product benefits .................................................................................................................................................. 7 Acceptance tests / Warranties ............................................................................................................................. 7 Design and selection information ...................................................................................................................... 7 Information on using the characteristic curve ............................................................................................. 7 Fluid handled .................................................................................................................................................8 Overview of product features / selection tables ................................................................................................ 9 Table of fluids handled .................................................................................................................................9 Shaft seal ...................................................................................................................................................... 12 Pressure and temperature limits ....................................................................................................................... 12 Movitec A, B .................................................................................................................................................13 Material variants ................................................................................................................................................ 13 Technical data .................................................................................................................................................... 14 Motors ..........................................................................................................................................................14 Types of connection ..........................................................................................................................................15 Terminal box positions ...................................................................................................................................... 15 Selection charts .................................................................................................................................................. 16 Movitec; n = 3500 rpm ................................................................................................................................. 16 Movitec; n = 1750 rpm ................................................................................................................................. 17 Characteristic curves .......................................................................................................................................... 17 n = 3500 rpm ................................................................................................................................................ 18 n = 1750 rpm ................................................................................................................................................ 28 Dimensions ......................................................................................................................................................... 34 Movitec, 2B, n = 3500 rpm ........................................................................................................................... 34 Movitec, 4B, n = 3500 rpm ........................................................................................................................... 35 Movitec, 6B, n = 3500 rpm ........................................................................................................................... 36 Movitec, 10B, n = 1750 rpm ......................................................................................................................... 37 Movitec, 10B, n = 3500 rpm ......................................................................................................................... 38 Movitec, 15B, n = 1750 rpm ......................................................................................................................... 39 Movitec, 15B, n = 3500 rpm ......................................................................................................................... 40 Movitec, 25B, n = 1750 rpm ......................................................................................................................... 41 Movitec, 25B, n = 3500 rpm ......................................................................................................................... 42 Movitec, 40B, n = 1750 rpm ......................................................................................................................... 43 Movitec, 40B, n = 3500 rpm ......................................................................................................................... 44 Movitec, 60B, n = 1750 rpm ......................................................................................................................... 45 Movitec, 60B, n = 3500 rpm ......................................................................................................................... 46
3
Contents
Movitec, 90B, n = 1750, 3500 rpm ............................................................................................................... 47 Movitec, LHS 6, n = 3500 rpm ...................................................................................................................... 48 Information on installation ............................................................................................................................... 49 Scope of supply .................................................................................................................................................. 51 Accessories ......................................................................................................................................................... 51 General assembly drawing with list of components .......................................................................................52 Movitec 2B, 4B, 6B .......................................................................................................................................52 Movitec 10B, 15B .........................................................................................................................................53 Movitec 25B, 40B, 60B ................................................................................................................................. 54 Movitec 90B .................................................................................................................................................. 55 Movitec LHS 6 ............................................................................................................................................... 56 Detailed designation ......................................................................................................................................... 57
4
High-pressure Pumps High-pressure In-line Pumps
High-pressure Pumps
Operating data Movitec A
High-pressure In-line Pumps
Movitec
Characteristic Flow rate Head Operating temperature Operating pressure
Q H t p
Value ≤ 8.6 m3/h (2.4 l/s) ≤ 401 m -15 °C to +120 °C ≤ 40 bar1)
Q H t p
Value ≤ 112.8 m3/h (31.0 l/s) ≤ 249 m -20 °C to +140 °C2) ≤ 40 bar1)
Movitec B Characteristic Flow rate Head Operating temperature Operating pressure
Designation Example: Movitec VCF 90/2-1 B Key to the designation Code Movitec VC
Main applications ▪ Spray irrigation systems ▪ Irrigation systems ▪ Washing plants ▪ Fire-fighting systems ▪ Pressure boosting
F
▪ Industrial plants ▪ Water supply systems ▪ Heating, ventilation and air-conditioning systems ▪ Marine applications
Fluids handled ▪ High-temperature hot water ▪ Clear water ▪ Condensate
90 2 -1 B
Description Type series Design LHS Stainless steel (pump casing) Stainless steel (hydraulic system of the pump) V Stainless steel/gray cast iron (pump casing) Stainless steel (hydraulic system of the pump) VS Stainless steel/gray cast iron (pump casing) Stainless steel (hydraulic system of the pump) VC Gray cast iron (pump casing) Stainless steel (hydraulic system of the pump) VM Version with close-coupled motor Type of connection Oval flange E External thread F Round flange T Tri-clamp coupling V Victaulic coupling Size, flow rate [m³/h] at Qopt 2, 4, 6, 10, 15, 25, 40, 60, 90 Number of stages Number of reduced stages Generation 3) Generation A B Generation B
▪ Cooling water ▪ Fire-fighting water ▪ Oil ▪ Cleaning agents ▪ And others (⇨ Page 9)
Design details Design ▪ High-pressure in-line pump ▪ Maximum pressure class PN 40 ▪ Centrifugal pump ▪ Single-stage or multi-stage
1) 2) 3)
The sum of inlet pressure and shut-off head must not exceed the value indicated For operating temperatures > 120 °C the pressure class must be ≤ PN 25. Blank
Movitec
5
High-pressure Pumps High-pressure In-line Pumps Installation types
– ≤ 25 bar – Fitted as standard for Movitec 2B, 4B, 6B, 10B, 15B
Standard: ▪ Vertical installation
▪ "Easy access" design – Easy to replace
Optional: ▪ Horizontal installation
Drive
– Unbalanced bellows-type seal – ≤ 25 bar
▪ Surface-cooled KSB squirrel-cage motor ▪ 3~230/400 V up to 2.2 kW ▪ 3~400/690 V from 3.0 kW ▪ Thermal class F to IEC34-1 ▪ Efficiency class IE2 (from 0.75 kW) ▪ Enclosure IP55 ▪ Frequency 60 Hz ▪ Thermal class F Optional: ▪ Efficiency class IE3
Shaft seal The shaft seal is an uncooled, maintenance-free mechanical seal to EN 12756. ▪ "Fixed" design – Mechanical seal in standard design
– Drive lantern need not be removed to replace the seal. – Motor rating 5.5 kW and above: Motor need not be removed. – Fitted as standard for Movitec 25B, 40B, 60B, 90B ▪ Cartridge design – Cartridge seal – Unbalanced bellows-type design (PN 25) or special balanced design (PN 40) – Drive lantern need not be removed to replace the seal. – Motor rating 5.5 kW and above: Motor need not be removed. – Optionally available for all sizes except Movitec LHS 6
Bearings ▪ Tungsten carbide plain bearings at the hydraulic rotor
– Unbalanced bellows-type seal
6
Movitec
High-pressure Pumps High-pressure In-line Pumps Materials Overview of materials depending on the design Components
Movitec
Baseplate Gray cast iron4) Cast stainless steel5) Pump casing Gray cast iron6) Cast stainless steel Hydraulic system of the pump Stainless steel Cast stainless steel7)
V
VC
VS
LHS 6
EN-GJS-400-15/ EN-GJL-250 1.4308
-
-
-
EN-GJS-400-15/ EN-GJL-250 1.4308
1.4308
EN-GJL-250 -
1.4408
1.4408
1.4301 1.4308
1.4301 1.4308
1.4404 1.4408
1.4404 -
Comparison of materials EN EN-GJL-250 EN-GJS-400-15 1.4301 1.4308 1.4404 1.4408
-
– with water ASTM A48 Class 35 B A5369 Grade 60-40-18 SS 304 Grade CF8M SS 316L Grade CF8M
▪ Materials testing – Certificate of compliance with the order (corresponds to EN 10204) In the certificate of compliance with the order the manufacturer confirms by way of an informal report without specifying test results that the delivery complies with the stipulations of the purchase order. – Test report 2.2 on request ▪ Final inspection
Coating and preservation
– Inspection certificate 3.1 to EN 10204 on request
Coating of pump components Component Stainless steel components Movitec VC: Pump casing made of gray cast iron Movitec V/VS: Slide flanges made of gray cast iron Drive lantern made of gray cast iron
Coating No additional coating Cataphoretic coating
Cataphoretic coating
▪ Hydraulic test The operating point of each pump is guaranteed to ISO 9906:2012 Grade 3B. This test is always carried out using the original motor. The NPSH and the suction lift are not measured (3.2 certificate available). ▪ Warranties Warranties are given within the scope of the valid delivery conditions.
Powder coating
Design and selection information Product benefits ▪ Reliable: product-lubricated plain bearings made of tungsten carbide, cast pump foot, torsion-resistant pump shroud and confined O-rings ▪ Long service life due to corrosion-resistant hydraulic components made of stainless steel ▪ Easy to service: can be fitted with any standardized mechanical seal (to EN 12756) ▪ Various materials and connection options, extended temperature and pressure range
Acceptance tests / Warranties
Information on using the characteristic curve NPSH: ▪ The NPSH values given in the individual characteristic curves are minimum values which correspond to the cavitation limit. ▪ A safety margin of at least 0.5 m must be added when selecting the pump to compensate for measuring inaccuracies. ▪ The NPSH curves reflect average values. ▪ A safety margin of 0.5 m must be added to the NPSH value of the characteristic curve when selecting a system.
▪ Pressure test – To EN 809 ▪ Leak test
4) 5) 6) 7)
Powder-coated Optional With cataphoretic coating Size 90 only
Movitec
7
High-pressure Pumps High-pressure In-line Pumps Fluid handled
Movitec
The actual operating conditions must always be checked (concentration, temperature, solids content). Penetration of air into the system must be avoided by all means. If the fluid handled contains solids such as steel chips or steel chip dust, check the permissible particle concentration with KSB.
Movitec
2B 4B 6B 10B 15B
Q [%]
min. 1,4 2,0 3,0 4,3 -
40 35 30
4-pole min. 0,5 0,8
15
max. 6,6 11,3
10 5 0 40
50
60
70
80
90
100
For pumps with VdS certification, the minimum flow rate Q min is 5 % of the permissible flow rate.
Movitec
120
130
140
Minimum flow rate required as a function of fluid temperature at a fluid temperature > 20 °C
8
110
t [°C]
8)
max. 17,5 27,0 38,0 53,9 -
20
2-pole max. 3,3 6,5 9,0 13,2 22,5
4-pole max. 35,0 54,0 76,0 110,0 8,6
25
Q [m³/h] min. 0,2 0,4 0,6 1,18) 1,6 8)
min. 2,8 4,0 6,0 8,5 0,8
25B 40B 60B 90B LHS 6
Minimum/maximum flow rate Minimum/maximum flow rate (Q) at a fluid temperature ≤ 20 °C
Q [m³/h] 2-pole
High-pressure Pumps High-pressure In-line Pumps Overview of product features / selection tables Table of fluids handled The data refer to the chemical resistance of the materials. The relevant regulations/standards governing individual pump applications have to be complied with. If the operating conditions differ from the data given (e.g. mixed products) or if the fluids pumped are not included in the table below, please contact KSB.
▪ Temperature ranges: – Reference temperature: 20 °C – For temperatures < 0 °C: contact KSB. – For temperatures > 50 °C: check and observe the vapor pressure of the fluid handled. – Max. temperature = 120 °C, unless indicated otherwise ▪ Max. concentration = 100 % unless indicated otherwise ▪ Mechanical seal silicon carbide / carbon (Q1B): not suitable for fluids containing solid substances. This rule also covers particles developing as a result of salt crystallization at low fluid temperatures. ▪ Mechanical seal tungsten carbide / tungsten carbide (U3U3): solids content max. 20 ppm (depending on particle size), with the exception of corrosive fluids. Fluids with a higher solids content are not permitted (ppm = 1 mg/kg). ▪ Caution: High temperatures will increase corrosion (reference temperature = 20 °C). ▪ Under unfavorable conditions (high temperatures, deposits, long idle periods), chloride contents of more than 300 mg/l may result in localized corrosion.
Selecting the design of pump and mechanical seal depending on the fluid to be handled Fluid handled Substance contained
Alum, acid-free Alum, acid-free Alkaline solution, bottle rinsing, max. 2% sodium hydroxide Alcohol ▪ Butanol ▪ Ethanol ▪ Propanol ▪ Spirits (40 % ethanol) Wine (white, red) Tartaric acid Ammonium bicarbonate Aluminum sulphate, acid-free Aluminum sulphate, acid-free Ammonium sulphate Calcium acetate, acid-free Calcium nitrate, acid-free Ferric sulphate (II) Water-oil emulsion (95 %, 5 %), free of solids Ethylene glycol base antifreeze, inhibited, closed system
Ethylene glycol base antifreeze, inhibited, open system
9)
Movitec Max. percentage
Tmax.
V
VC
[%] ≤3 ≤3 ≤ 100
[°C] 50 80 40
13 -
14 15 16 ✘ - ✘ -
≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 10 ≤5 ≤5 ≤ 20 ≤ 10 ≤ 10 ≤5 ≤ 100
60 60 80 60 60 60 40 50 60 60 60 60 80 80
✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ -
✘ ✘
-
≤ 20 ≤ 25 ≤ 30 ≤ 35 ≤ 40 ≤ 45 ≤ 50 ≤ 20 ≤ 25
110 110 110 110 110 110 110 110 110
✘9) ✘9) ✘9) ✘9) ✘9) ✘9) ✘9) ✘9) ✘9)
✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
-
18 -
13 -
14 15 16 - ✘ -
✘ ✘ ✘ -
-
✘ ✘ ✘ ✘ ✘ -
✘
-
✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
-
✘9) ✘9) ✘9) ✘9) ✘9) ✘9) ✘9) -
✘ ✘ ✘ ✘ ✘ ✘ ✘ -
-
VS
LHS
18 -
23 -
13 -
14 15 16 ✘ ✘ - ✘ -
18 -
17 -
19 -
-
-
✘ ✘ ✘ ✘ ✘ -
✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ -
✘ ✘
-
✘ ✘ ✘ ✘ -
-
✘ ✘ -
✘ -
✘ ✘ ✘ ✘ ✘ ✘ ✘ -
-
✘9) ✘9) ✘9) ✘9) ✘9) ✘9) ✘9) -
✘9) ✘9) ✘9) ✘9) ✘9) ✘9) ✘9) ✘9) ✘9)
✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
-
✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
-
-
-
≤ 100 °C
Movitec
9
High-pressure Pumps High-pressure In-line Pumps Fluid handled Substance contained
Glycerine Glycols (pure) Diethylene glycol Ethylene glycol Potassium hydroxide Potassium nitrate, acid-free Potassium sulphate, acid-free Copper sulphate Magnesium sulphate Milk Lactic acid Miscella10) Sodium carbonate Sodium hydroxide Sodium nitrate, acid-free Sodium nitrate, acid-free Sodium sulphate, acid-free Oil ▪ Peanut oil ▪ Peanut oil ▪ Linseed oil, ≤ 3 % H2SO4 ▪ Linseed oil, ≤ 3 % H2SO4 ▪ Hydraulic oil10) ▪ Linseed oil ▪ Corn oil ▪ Mineral oil10) ▪ Vegetable oil10) ▪ Rapeseed oil ▪ Salad oil ▪ Lubricating oil10) ▪ Silicone oil10) ▪ Soybean oil ▪ Turpentine oil10) ▪ Turbine oil (no SDF oils)10) ▪ Oil-water mixtures Paraffin10) Kerosene Polyethylene glycol10) Polyglycol10) Crude oil10) Crude oil condensate10) Juice (fruit and sugar juice) Acid ▪ Acetic acid ▪ Acetic acid ▪ Tannic acid ▪ Maleic acid ▪ Lactic acid ▪ Lactic acid ▪ Phosphoric acid ▪ Sulphuric acid
10)
Movitec Max. percentage
Tmax.
V
[%] ≤ 30 ≤ 35 ≤ 40 ≤ 45 ≤ 50 ≤ 40 ≤ 100 ≤ 100 ≤ 100 ≤5 ≤5 ≤3 ≤5 ≤ 10 ≤ 100 ≤ 40 ≤ 100 ≤6 ≤5 ≤ 10 ≤ 10 ≤5
[°C] 110 110 110 110 110 80 100 100 100 40 30 20 80 80 60 60 40 60 60 30 60 60
✘9) ✘9) ✘9) ✘9) ✘9) ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
14 ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ -
15 ✘ ✘ ✘ ✘ -
16 ✘ ✘ ✘ ✘ ✘ -
18 -
13 ✘ ✘ ✘ ✘ ✘ ✘ -
14 ✘ ✘ ✘ ✘ -
≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100
90 100 20 60 80 60 100 80 100 100 100 100 60 100 60 100 100 100 80 80 80 80 80 60
-
✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
-
-
-
-
✘ ✘ ✘ ✘ ✘ -
-
≤ 10 ≤5 ≤ 20 ≤ 10 ≤5 ≤ 40 ≤5 ≤5
60 60 80 60 60 60 20 20
✘ ✘ -
✘ ✘ ✘ ✘ ✘ -
-
-
-
-
-
-
13
VC
Fluid details are required in this case.
10
Movitec
15 16 ✘ ✘ ✘ -
VS
13
LHS
18 -
23 ✘ ✘ ✘ ✘ ✘ -
✘9) ✘9) ✘9) ✘9) ✘9) ✘ ✘ ✘ ✘ ✘ ✘ ✘
14 ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ -
15 ✘ ✘ ✘ ✘ -
16 ✘ ✘ ✘ ✘ ✘ -
18 -
17 ✘ ✘ -
19 ✘ ✘ ✘ ✘
-
-
-
-
✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
-
-
-
✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
✘ -
-
-
-
✘ ✘ -
✘ ✘ ✘ ✘ ✘ -
-
✘
-
-
-
High-pressure Pumps High-pressure In-line Pumps Fluid handled Substance contained
▪ Tartaric acid ▪ Citric acid ▪ Citric acid Fuel ▪ Diesel oil ▪ Fuel oil ▪ Kerosene (jet fuel) Trisodium phosphate Water ▪ Deionized water (fully desalinated) ▪ Distilled water ▪ Dealkalized water ▪ Decarbonized water ▪ Swimming pool water (no brine) ▪ Permeate (osmosis) ▪ Partly desalinated water ▪ Fire-fighting water ▪ Heating water in accordance with VDI 2035. ▪ Hot water treated in acc. with VdTÜV 1466 ▪ Boiler feed water to VdTÜV 1466 ▪ Condensate treated in acc. with VdTÜV 1466 ▪ Vapor condensate (brewery) ▪ Cooling water ▪ Tap water ▪ Brewing water ▪ Ice water (brewery) ▪ Drinking water / tap water ▪ Hot water (brewery) ▪ Clean water ▪ Brackish water ▪ Seawater ▪ Raw water ▪ Gray water, slightly contaminated water ▪ River water ▪ Lake water ▪ Dam water ▪ Surface water ▪ Fresh water ▪ Barrier water ▪ Rinsing water ▪ Rainwater, with strainer ▪ Water-glycol mixture
11) 12)
Movitec Max. percentage
Tmax.
V
[%] ≤8 ≤ 25 ≤ 10
[°C] 40 30 30
13 -
≤ 100 ≤ 100 ≤ 100 ≤4
80 80 80 80
-
✘ ✘ ✘ -
✘
≤ 100
140
✘
-
≤ 100 ≤ 100 ≤ 100 ≤ 100
140 120 120 100
-
≤ 100 ≤ 100 ≤ 100 ≤ 100
140 120 60 100
≤ 100
VC
14 15 16 ✘ ✘ -
18 -
13 -
14 15 16 -
-
-
-
✘
-
-
-
✘11)
-
-
-
✘ ✘ -
-
-
-
✘ ✘
-
✘ ✘ -
-
✘11) ✘ ✘
✘
140
✘9)
-
-
-
≤ 100
140
✘9)
-
-
≤ 100
140
✘9)
-
≤ 100
140
✘9)
≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100
100 60 60 60 60 60 60 15 15 60 60
≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≤ 100 ≥ 20 ≤ 100
60 60 60 60 60 70 70 60 100
VS
18 -
23 -
13 -
-
-
-
-
✘ ✘ ✘ -
✘
-
-
-
-
✘
-
-
-
-
-
-
-
✘ -
-
-
✘ ✘
✘
✘11) ✘9)
-
-
-
-
✘11) ✘9)
-
-
-
-
✘11) ✘9)
-
-
-
-
✘11) ✘9)
✘ ✘ ✘ ✘ ✘ ✘ -
✘ -
✘ ✘ ✘
✘ ✘ -
✘ -
-
✘ -
✘ ✘ ✘ ✘ -
✘ ✘ ✘ -
-
LHS
14 15 16 ✘ ✘ ✘ -
18 -
17 -
19 -
-
-
-
-
-
-
✘11)
-
✘
-
✘ ✘ -
-
-
✘ ✘
-
✘ ✘ -
-
✘11) ✘ ✘
-
✘12)
✘11) ✘9)
✘9)
-
-
-
✘11)
-
✘12)
-
✘11) ✘9)
✘9)
-
-
-
✘11)
-
✘12)
-
-
✘11) ✘9)
✘9)
-
-
-
✘11)
-
✘12)
-
-
-
✘11) ✘9)
✘9)
-
-
-
✘11)
-
-
✘ ✘ ✘ ✘ ✘ ✘ -
✘ -
✘ ✘ ✘
✘ ✘ -
✘ -
✘ -
✘ ✘ ✘ ✘ ✘ ✘ -
✘ -
✘ ✘ ✘
✘ ✘ ✘ ✘ -
✘ -
-
✘ -
-
✘ -
✘ ✘ ✘ ✘ -
✘ ✘ ✘ -
-
-
-
✘ -
✘ ✘ ✘ ✘ -
✘ ✘ ✘ -
-
-
✘
- ✘12) ✘ -
≤ 120 °C, depending on the pressure classes ≤ 120 °C
Movitec
11
High-pressure Pumps High-pressure In-line Pumps Shaft seal Available mechanical seals Mechanical seal Code
Type
11 12 13 14 15 16 18 20 21 22 23 24 28 29
MG-G60 MG-G60 RMG-G606 RMG-G606 RMG-G606 RMG-G606 RMG-G606 H7N H7N H7N RMG-G606 MG-G606 MG-G606 MG-G606
Code to EN 12756 B Q1 E G G B Q1 V G G Q1 B E G G Q1 B V G G U3 U3 X4 G G U3 U3 V G G U3 B E G G Q1 A E G G Q1 A V G G Q1 A X4 G G Q1 B E G G Q1 Q1 V G G Q1 Q1 X4 G G Q1 Q1 E G G
Elastomer
Design
C EPDM ✘ FPM ✘ EPDM WRAS / ACS ✘ FPM ✘ HNBR ✘ FPM ✘ EPDM 559236 ✘ EPDM 559236 ✘ FPM ✘ HNBR ✘ EPDM ✘ FPM ✘ HNBR ✘ EPDM ✘
E ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
F ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Temperature
Pressure
min.
max.
[bar]
[°C] -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20
[°C] +100 +120 +100 +120 +12013) +12013) +12013) +12014) +12014) +12014) +100 +120 +120 +100
10 10 25 25 25 25 25 40 40 40 25 10 10 10
Key to mechanical seal materials Description Primary ring
Mating ring
Elastomer
Spring Other metal parts
Code to EN 12756 B U3 Q1 A B U3 Q1 E V X4 G G
Contact face materials / secondary seals Hard carbon, resin-impregnated Tungsten carbide (CrNiMo binder) Silicon carbide (sintered without pressure) Carbon graphite, antimony-impregnated Hard carbon, resin-impregnated Tungsten carbide (CrNiMo binder) Silicon carbide (sintered without pressure) EPDM (ethylene propylene rubber) Fluoroelastomer (Viton) HNBR CrNiMo steel CrNiMo steel
Pressure and temperature limits
13) 14)
Up to 140 °C if the pressure does not exceed 16 bar Up to 140 °C if the pressure does not exceed 25 bar
12
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec A, B Movitec A
Movitec B The pump's pressure and temperature limits are indicated on the name plate.
Pressure and temperature limits Size
Pressure
Temperature
LHS6
[bar] 40
[°C] 120
Material variants Overview of pump component materials depending on the design Part No.
Description
Movitec V
10-6 101 108 160 210 230 341 412 525 529 890
Pump shroud Pump casing Stage casing Discharge cover Shaft Impeller Drive lantern O-ring Spacer sleeve Bearing sleeve Baseplate
905 920 932
Tie bolt Nut Circlip
1.4301
VS
LHS 6 1.4404 1.4408 1.440415) / 1.440816) 1.440415) / 1.440816) 1.4460 1.440415) / 1.440816)
1.4308 EN-GJL-250 1.430115) / 1.430816) 1.430115) / 1.430816) 1.430115) 1.4057 1.430115) / 1.430816) EN-GJL-250 EPDM-WRc / ACS / ACS EPDM FPM / HNBR 1.4301 1.4401 Tungsten carbide / aluminum oxide EN-GJS-400-15 / EN-GJS-400-15 / EN-GJL-250 / 1.430817) EN-GJL-250 / 1.430817) 1.4057 1.4301 1.4404 1.4571
Comparison of materials EN EN-GJL-250 EN-GJS-400-15 1.4057 1.4301
VC
ASTM A48 Class 35 B A5369 Grade 60-40-18 SS 431 SS 304
EN 1.4308 1.4404 1.4408 1.4460 1.4571
ASTM Grade CF8M SS 316L Grade CF8M SS 329 SS 316Ti
15) 16) 17)
Movitec 2B, 4B, 6B, 10B, 15B, 25B, 40B, 60B Movitec 90B Optional for: Movitec 2B, 4B, 6B, 10B, 15B
Movitec
13
High-pressure Pumps High-pressure In-line Pumps Technical data Motors Technical data of the motors PN
UN
IA
IA/IN
cos φ
Tolerance UN
Speed
Efficiency
Sound pressure level Cable gland
Maximum frequency of starts
[%]
rpm
[%]
[dB(A)]
1
[kW] [V]
[A]
0,37 0,55 0,75 1,1 1,5 2,2 3 3 4 4 5,5 5,5 7,5 7,5 11 11 15 15 18,5 18,5 22 22 30 30 37 37 45 45
230/400 230/400 230/400 230/400 230/400 230/400 230/400 400/690 230/400 400/690 230/400 400/690 230/400 400/690 230/400 400/690 230/400 400/690 230/400 400/690 230/400 400/690 230/400 400/690 230/400 400/690 230/400 400/690
1,54/0,89 2,29/1,32 2,94/1,69 4,14/2,38 4,98/2,86 7,14/4,11 9,51/5,47 5,47/3,17 12,49/7,18 7,18/4,16 17,22/9,90 9,90/5,74 23,29/13,29 13,39/7,76 32,87/18,9 18,9/10,96 43,48/25,58 25,58/14,83 52,96/31,03 31,03/17,99 63,89/36,74 36,74/21,3 86,47/49,72 49,72/28,82 106,19/61,06 61,06/35,4 128,6/73,94 73,94/42,87
3,9 4,4 7,4 5,8 6,2 6,2 7,5 7,5 7,2 7,2 6,4 6,4 6,4 6,4 6,4 6,4 6,4 6,4 6,4 6,4 6,4 6,4 6,4 6,4 6,4 6,4 6,4 6,4
0,79 0,76 0,79 0,8 0,89 0,9 0,91 0,91 0,9 0,9 0,9 0,9 0,9 0,9 0,909 0,909 0,909 0,909 0,92 0,92 0,9191 0,9191 0,9191 0,9191 0,9191 0,9191 0,9191 0,9191
+20/-5 +20/ -5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5
3300 3345 3450 3450 3480 3480 3480 3480 3500 3500 3510 3510 3510 3510 3522 3522 3528 3522 3528 3528 3540 3540 3546 3540 3548 3540 3563 3563
75,70 79,10 81,10 83,30 85 85,90 87 87 89,30 89,30 89,10 89,10 89,80 89,80 92,41 92,41 93,13 93,13 93,64 93,64 94,04 94,04 94,76 94,76 95,17 95,17 95,57 95,57
58 58 58 58 58 60 62 62 64 64 68 68 68 68 72 72 72 72 84 84 78 78 80 80 80 80 80 80
1×M20×1,5 1×M20×1,5 1×M20×1,5 1×M20×1,5 1×M25×1,5 1×M25×1,5 2×M25×1,5 2×M25×1,5 2×M25×1,5 2×M25×1,5 2×M32×1,5 2×M32×1,5 2×M32×1,5 2×M32×1,5 2×M40×1,5 2×M40×1,5 2×M40×1,5 2×M40×1,5 2×M40×1,5 2×M40×1,5 2×M40×1,5 2×M40×1,5 2×M50×1,5 2×M50×1,5 2×M50×1,5 2×M50×1,5 2×M50×1,5 2×M50×1,5
20 20 20 20 20 20 20 20 20 20 20 20 20 20 15 15 15 15 12 15 12 12 12 12 20 12 20 12
0,55 0,75 1,1 1,5 2,2 3 3 4 4 5,5 5,5 7,5 7,5
230/400 230/400 230/400 230/400 230/400 230/400 400/690 230/400 400/690 230/400 400/690 230/400 400/690
2,30/1,32 3,04/1,75 4,1/2,36 5,52/3,17 8,06/4,64 10,14/5,86 6,25/3,62 13,23/7,76 7,76/4,5 24,74/14,23 10,69/6,20 24,7/14,26 14,26/8,26
4,5 6,3 7,5 7,3 7,2 7,2 7,2 5,95 5,95 5,95 5,95 5,95 5,95
0,74 0,75 0,8 0,8 0,79 0,828 0,79 0,84 0,84 0,83 0,83 0,84 0,84
+20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5 +20/-5
1710 1710 1735 1735 1720 1720 1720 1745 1745 1746 1750 1750 1750
81 82,60 84,10 85,30 86,70 87,90 87,70 88,60 88,60 90,98 89,50 90,40 90,40
57 56 58 58 57 57 57 60 60 62 62 62 62
1×M20×1,5 1×M20×1,5 1×M20×1,5 1×M25×1,5 2×M25×1,5 2×M25×1,5 2×M25×1,5 2×M25×1,5 2×M25×1,5 2×M32×1,5 2×M32×1,5 2×M32×1,5 2×M32×1,5
20 20 20 20 20 20 20 20 20 20 20 20 20
14
Movitec
/h
High-pressure Pumps High-pressure In-line Pumps Types of connection Overview of available connection types Description
Movitec V/VS
Type of connection
Oval flange
Standard
ISO 228-1
Material
1.430819) / 1.440820) PN 16
Max. pressure class
VF
VSF18)
VCF
LHS
Round flange
VE/VME18)
VV/VMV/VSV
External thread
Victaulic coupling
VT/ VST/ VMT18) Tri-clamp coupling
EN 1092-1/EN 1092-2 ASME B 16.1 JIS EN1.4308 EN-GJL-250 GJS-400-15
EN1092-2
ISO 228-1
-
DIN 32676
1.4408
ENGJS-400-15
1.4408
1.4408
PN 40
PN 40
PN 16
PN 40
PN 40
Terminal box positions Top view of terminal box positions
P3 = Position 3 Standard Movitec V/ Standard Movitec VS
P6 = Position 6
P9 = Position 9 Standard Movitec VME
P12 = Position 12 Not for Movitec VME
18) 19) 20)
The stainless steel baseplate (see illustration) is available as an option. For Movitec V For Movitec VS
Movitec
15
High-pressure Pumps High-pressure In-line Pumps Selection charts Movitec; n = 3500 rpm
86JSP
,0JSP
/+6
IW
+ >P@
4>PñK@
OV
16
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec; n = 1750 rpm
86JSP
,0JSP
+ >P@
IW
4>PñK@
OV
Characteristic curves The characteristic curves are based on the following principles: ▪ Tolerances to ISO 9906:2012 Grade 3B The characteristic curves were measured under the following conditions:
▪ Fluid properties: – Deaerated water – Temperature: 20 °C – Density: 1.0 kg/dm³ – Kinematic viscosity: 1 mm²/s
▪ Motor used: – Standardized KSB motor with integrated frequency inverter
Movitec
17
High-pressure Pumps High-pressure In-line Pumps n = 3500 rpm Movitec; 2B; n = 3500 rpm
4>86JSP@
4>,0JSP@
N:
N: N:
N: N:
N:
N: N:
N:
+>IW@
N: N:
+>P@
N:
N:
N: N: N:
136+
5
4>OV@
4>PñK@
136+ >IW@
>P@
5
(WD>@ 3>N:@
3>KS@
6W
4>PñK@
.
St = Number of stages The power input P is indicated per stage
18
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec; 4B; n = 3500 rpm
4>86JSP@
4>,0JSP@
N:
N:
N:
N:
N: N:
N: N:
+>IW@
N: N:
+>P@
N:
N: N: N:
4>PñK@
136+
5
4>OV@
136+ >IW@
>P@
5
(WD>@
3>KS@
3>N:@
6W
4>PñK@
.
St = Number of stages The power input P is indicated per stage
Movitec
19
High-pressure Pumps High-pressure In-line Pumps Movitec; 6B; n = 3500 rpm
4>86JSP@
4>,0JSP@
N:
N: N: N: N:
N: N:
N:
N:
+>IW@
N:
+>P@
N:
N:
N: N:
136+
5
4>PñK@
4>OV@
136+ >IW@ 5
>P@
(WD>@ 3>KS@
3>N:@ 6W
4>PñK@
.
St = Number of stages The power input P is indicated per stage
20
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec; 10B; n = 3500 rpm
4>86JSP@
4>,0JSP@
N:
N: N: N: N: N:
N:
N:
+>IW@
N:
+>P@
N:
N: N: N:
136+
5
4>PñK@
4>OV@
136+ >IW@
>P@
5
(WD>@
3>N:@
3>KS@ 6W
4>PñK@
0RY71*
St = Number of stages The power input P is indicated per stage
Movitec
21
High-pressure Pumps High-pressure In-line Pumps Movitec; 15B; n = 3500 rpm
4>86JSP@
4>,0JSP@
N: N:
N: N: N:
N: N:
+>IW@ N:
+>P@
N: N:
N:
136+
5
4>PñK@
4>OV@
136+ >IW@ 5
>P@
(WD>@ 3>KS@
3>N:@ 6W
4>PñK@
0RY71*
St = Number of stages The power input P is indicated per stage
22
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec; 25B; n = 3500 rpm
4>86JSP@
4>,0JSP@
N:
N:
+>IW@ N:
N:
N:
N:
+>P@ N:
136+
5
4>OV@
4>PñK@
136+ >IW@
>P@
5
(WD>@ 3>N:@
3>KS@
6W
4>PñK@
.
St = Number of stages The power input P is indicated per stage
Movitec
23
High-pressure Pumps High-pressure In-line Pumps Movitec; 40B; n = 3500 rpm
4>,0JSP@
4>86JSP@
N:
N: N: N:
N: N:
N:
+>IW@
N: +>P@ N:
N:
N: N:
4>PñK@
4>OV@
136+ >P@
136+ >IW@
5
5
(WD>@
6W
6W
3>N:@
4>PñK@
0RYLWHF%B
St = Number of stages The power input P is indicated per stage
24
3>KS@
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec; 60B; n = 3500 rpm
4>86JSP@
4>,0JSP@
N:
N: N: N:
N:
N: +>IW@ N:
+>P@
N: N: N:
136+
5
4>PñK@
4>OV@
>P@
136+ >IW@ 5
(WD>@ 6W
3>N:@
6W
3>KS@
4>PñK@
0RYLWHF%B
St = Number of stages The power input P is indicated per stage
Movitec
25
High-pressure Pumps High-pressure In-line Pumps Movitec; 90B; n = 3500 rpm
4>,0JSP@
4>86JSP@
N:
N:
N: N:
N:
+>IW@
N: N:
+>P@
4>PñK@
136+
5
4>OV@
>P@
136+ >IW@ 5
(WD>@ 3>KS@
3>N:@ 6W
4>PñK@
0RY BB
St = Number of stages The power input P is indicated per stage
26
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec; LHS 6; n = 3500 rpm
4>86JSP@
4>,0JSP@
4PLQ N:
N:
N:
+>IW@
N:
+>P@
136+
5
4>PñK@ 4>OV@
136+ >IW@
>P@
5
(WD>@ 3>N:@
3>KS@
6W
4>PñK@
. B
St = Number of stages The power input P is indicated per stage
*) Qmin ≤ 40 °C
Movitec
27
High-pressure Pumps High-pressure In-line Pumps n = 1750 rpm Movitec; 10B; n = 1750 rpm
4>86JSP@
4>,0JSP@
N:
N:
N:
N: N: N:
N: N:
+>IW@
N: N:
+>P@
N:
N: N:
136+
5
4>PñK@ 4>OV@
136+ >IW@
>P@
5
(WD>@
3>KS@
3>N:@ 6W
4>PñK@
0RY71*
St = Number of stages The power input P is indicated per stage
28
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec; 15B; n = 1750 rpm
4>,0JSP@
4>86JSP@
N:
N:
N:
N:
N:
N:
N: +>IW@
N:
+>P@
N:
N: N:
136+
5
4>PñK@
4>OV@
136+ >IW@ 5
>P@
(WD>@ 3>KS@
3>N:@ 6W
4>PñK@
0RY71*
St = Number of stages The power input P is indicated per stage
Movitec
29
High-pressure Pumps High-pressure In-line Pumps Movitec; 25B; n = 1750 rpm
4>86JSP@
4>,0JSP@
N:
N: N: N:
N: N:
+>IW@ N: N: +>P@
N: N:
N: N:
136+
5
4>PñK@
4>OV@
136+ >IW@
>P@
5
(WD>@
3>N:@
3>KS@
6W
4>PñK@
.
St = Number of stages The power input P is indicated per stage
30
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec; 40B; n = 1750 rpm
4>86JSP@
4>,0JSP@
N:
N:
N:
N:
N: +>IW@ N: N:
+>P@ N: N:
4>PñK@
4>OV@
136+
5
136+ >IW@
>P@
5
(WD>@ 3>N:@
3>KS@
6W
4>PñK@
0RYLWHF%B
St = Number of stages The power input P is indicated per stage
Movitec
31
High-pressure Pumps High-pressure In-line Pumps Movitec; 60B; n = 1750 rpm
4>86JSP@
4>,0JSP@
N:
N:
N:
N:
N:
+>IW@
+>P@ N:
136+
5
4>OV@
4>PñK@
136+ >IW@ 5
>P@
(WD>@ 3>KS@
3>N:@
6W
4>PñK@
0RYLWHF%B
St = Number of stages The power input P is indicated per stage
32
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec; 90B; n = 1750 rpm
4>,0JSP@
4>86JSP@
N:
N: N:
+>P@ +>IW@
4>PñK@
4>OV@
136+
5
136+ >IW@
>P@
5
(WD>@
3>KS@
3>N:@
6W
4>PñK@
0RY BB
St = Number of stages The power input P is indicated per stage
Movitec
33
High-pressure Pumps High-pressure In-line Pumps Dimensions
A
Movitec, 2B, n = 3500 rpm 50
E2
E1
180 210
E1
G 1/4 Ø 42,2
Ø 42,2
100 145 210
4 î Ø13
E2
Movitec VV/VSV A
G 1/4
Ø 50,5
F1
180 210
4 î Ø 13
100 145 160
G 3/8
G 3/8
Movitec VT/VST
4 îØ14
A
Movitec VME
75 180 210
Dimensions E2
Movitec V/VS; VV/VSV; VF/VSF; VCF VME VT/VST F1
2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22
138 138 138 160 160 160 160 160 185 185 185 185 185 185 205 205
109 109 109 150 150 150 150 150 160 160 160 160 160 160 175 175
472 493 515 590 612 633 655 676 704 725 747 819 862 905 990 1049
F2
F1
[mm] 259 497 280 518 302 540 333 615 355 637 376 658 398 680 419 701 451 729 472 750 494 772 537 844 580 887 623 930 676 1015 719 1074
F2
F1
284 305 327 358 380 401 423 444 476 497 519 562 605 648 701 744
420 441 463 528 550 -
Movitec VF/VSF Ø115 Ø85 Ø68
4 î Ø14
A
75 180 210
G 1/4 DN 25
E1
100 145 250
4 îØ13
DN 25
Movitec V/VS, VV/VSF, VT/VST, VF/VSF, VCF
G 1/4
A
DN 25
Ø115 Ø85 Ø70
A
DN 25
F2
Stages
Ø 50,5
50
F1
100 150 250
4 î Ø13
Movitec VCF A G 1/4 50 180 210
G 6/4
4 î Ø13
G 6/4 100 145 195
G 1/4
A
Movitec VME
G1
G1 50 75 180 210
4 îØ13
100 145 160
Movitec V/VS
34
Movitec
105
High-pressure Pumps High-pressure In-line Pumps Movitec, 4B, n = 3500 rpm
E2
A
E1
E1
50
E2 180 210
G 1/4 Ø 42,2
Ø 42,2
100 145 210
4 î Ø13
Movitec VV/VSV A
G 1/4
F1
F1
Ø 50,5
G 3/8
G 3/8
180 210
F2 A
4 î Ø 13
G 1/4
A
E2
75
Movitec V/VS; VV/VSV; VF/VSF; VCF VME VT/VST F1
2 3 4 5 6 7 8 9 10 11 12 14 16 18
138 160 160 185 185 185 185 185 205 205 205 220 220 260
109 150 150 160 160 160 160 160 175 175 175 190 190 220
472 547 569 596 618 668 690 753 775 796 818 870 1012 1055
F2
F1
[mm] 259 497 290 572 312 594 343 621 365 643 386 693 408 715 429 778 461 800 482 821 504 843 547 895 666 1037 709 1080
F2
F1
284 315 337 368 390 411 433 464 486 507 529 572 691 734
420 485 507 -
180 210
Movitec VF/VSF Ø115 Ø85 Ø68
G1
G1
180 210
4 îØ13
A
G 1/4
100 150 250
4 î Ø13
Movitec VCF A G 1/4 50 180 210
50 75 180 210
4 î Ø14
75
G 1/4
A
100 145 250
4 îØ13
DN 25
E1
DN 25
4 îØ14
DN 25
Movitec VME
DN 25
Ø115 Ø85 Ø70
Dimensions Stages
100 145 160
Movitec VT/VST
A
Movitec V/VS, VV/VSF, VT/VST, VF/VSF, VCF
Ø 50,5
50
G 6/4
4 î Ø13
G 6/4 100 145 195
100 145 160
105
Movitec VME
Movitec V/VS
Movitec
35
High-pressure Pumps High-pressure In-line Pumps Movitec, 6B, n = 3500 rpm
E2
A
E1
E1
50
E2 180 210
G 1/4 Ø 42,2
Ø 42,2
100 145 210
4 î Ø13
Movitec VV/VSV A
G 1/4
F1
F1
Ø 50,5
G 3/8
G 3/8
180 210
F2 A
4 î Ø 13
Movitec VME
4 îØ19
DN 32
E2
75
Movitec V/VS; VV/VSV; VF/VSF; VCF VME VT/VST F1
160 160 185 185 185 205 205 220 220 220 260 260 260 260
150 150 160 160 160 175 175 190 190 190 220 220 220 220
533 558 589 643 668 735 760 794 819 844 968 1018 1068 1118
F2
F1
[mm] 276 558 301 583 336 614 361 668 386 693 421 760 446 785 471 819 496 844 521 869 622 993 672 1043 722 1093 772 1143
F2
F1
301 326 361 386 411 446 471 496 521 546 647 697 747 797
471 496 -
180 210
Movitec VF/VSF Ø140 Ø100 Ø78
G 5/4
G 5/4
4 îØ13
180 210
100 150 250
4 î Ø13
A G 1/4 50 180 210
G 6/4
4 î Ø13
G 6/4 100 145 195
100 145 160
Movitec VME
Movitec
G 1/4
Movitec VCF
Movitec V/VS
36
A DN 32
50 75 180 210
4 î Ø19
75
G 1/4
A
100 145 250
4 îØ13
DN 32
E1
2 3 4 5 6 7 8 9 10 11 12 14 16 18
G 1/4
A
DN 32
Ø140 Ø100 Ø80
Dimensions Stages
100 145 160
Movitec VT/VST
A
Movitec V/VS, VV/VSF, VT/VST, VF/VSF, VCF
Ø 50,5
50
105
High-pressure Pumps High-pressure In-line Pumps Movitec, 10B, n = 1750 rpm A
E2
E1 80 215 247
G 1/4 Ø 60,3
Ø 60,3
130 184 261
4 î Ø14
Movitec VV/VSV F1
A
G 1/4
Ø 64
Ø 64
80
G 3/8 F2
215 247
A
4 î Ø 14
130 184 200
Movitec VT/VST Ø150 Ø110 Ø85
Movitec V/VS, VV/VSF, VT/VST, VF/VSF, VCF E2
Movitec
DN 40
V/VS; VV/VSV; VF/VSF; VCF VT/VST F1 1 2 3 4 5 6 7 8 9 10 11 13 15
138,5 138,5 138,5 138,5 138,5 138,5 138,5 159 159 159 159 159 176,5
110 110 110 110 110 110 110 155 155 155 155 155 160
F2
[mm] 592 346 592 356 612 372 645 399 671 425 698 452 724 478 778 505 806 531 833 558 864 594 912 647 985 700
A
F1
F2
592 592 612 645 674 698 724 778 806 833 864 912 985
346 356 372 399 425 452 478 505 531 558 594 647 700
DN 40
E1
80 215 247
130 184 280
4 î Ø14
Movitec VF/VSF Ø150 Ø110 Ø85
4 îØ19
G 1/4
A DN 40
DN 40
Stages
G 1/4
A
4 î Ø19
Dimensions
80 215 247
4 îØ14
130 184 280
Movitec VCF
G 1/4 G 6/4
G 6/4 80 100 215 247
4 îØ14
130 184 200
Movitec V/VS
Movitec
37
High-pressure Pumps High-pressure In-line Pumps Movitec, 10B, n = 3500 rpm A
E2
E1 80 215 247
G 1/4 Ø 60,3
Ø 60,3
130 184 261
4 î Ø14
Movitec VV/VSV F1
A
Ø 64
P
Ø 64
80
G 3/8 F2
215 247
A
4 î Ø 14
130 184 200
Movitec VT/VST Ø150 Ø110 Ø85
80
E2
215 247
Movitec V/VS; VV/VSV; VF/VSF; VCF VT/VST F1
1 2 3 4 5 6 7 8 9 10 11 13 15
160 185 185 205 205 205 260 260 260 260 260 315 315
150 160 160 175 175 175 220 220 220 220 220 265 265
F2
[mm] 621 346 626 356 667 382 749 419 785 445 812 472 943 578 969 604 996 631 1022 657 1049 684 1265 767 1318 820
A
F1
F2
621 626 667 749 785 812 943 969 996 1022 1049 1265 1318
346 356 382 419 445 472 578 604 631 547 684 767 820
Movitec VF/VSF Ø150 Ø110 Ø85
4 îØ14
215 247
Movitec VCF
G 6/4
130 184 200
Movitec V/VS
Movitec
G 1/4
A
80
80 100 215 247
4 îØ19
DN 40
G 1/4
G 6/4
130 184 280
4 î Ø14
DN 40
Dimensions E1
DN 40
DN 40
Movitec V/VS, VV/VSF, VT/VST, VF/VSF, VCF Stages
G 1/4
A
4 î Ø19
38
G 1/4
4 îØ14
130 184 280
High-pressure Pumps High-pressure In-line Pumps Movitec, 15B, n = 1750 rpm A
E2
E1 90 215 247
G 1/4 Ø 60,3
Ø 60,3
130 184 261
4 î Ø14
Movitec VV/VSV F1
A
G 1/4
Ø 64
Ø 64
90
G 3/8 F2
215 247
A
4 î Ø 14
130 184 200
Movitec VT/VST
E1
E2
Movitec V/VS; VV/VSV; VF/VSF; VCF VT/VST F1
1 2 3 4 5 6 7 8 9 10 11
138,5 138,5 138,5 159 159 159 176,5 176,5 176,5 176,5 176,5
110 110 110 155 155 155 160 160 160 160 160
F2
[mm] 592 346 592 346 618 372 674 399 705 435 732 462 773 488 800 515 826 541 908 578 934 604
F1
F2
602 602 628 684 715 742 783 810 836 918 944
356 356 382 409 445 472 498 525 551 588 614
90 215 247
G 1/4
A
130 184 300
4 îØ14
Movitec VF/VSF Ø165 Ø125 Ø100 4 î Ø19
90 215 247
4 î Ø14
G 1/4
A
DN 50
Stages
4 îØ18
DN 50
Dimensions
DN 50
Ø165 Ø125 Ø100
DN 50
Movitec V/VS, VV/VSF, VT/VST, VF/VSF, VCF
130 184 300
Movitec VCF A
G 1/4
G2
G2
80 (90) 100 215 247
4 îØ14
130 184 200
Movitec V/VS
Movitec
39
High-pressure Pumps High-pressure In-line Pumps Movitec, 15B, n = 3500 rpm A
E2
E1 90 215 247
G 1/4 Ø 60,3
Ø 60,3
130 184 261
4 î Ø14
Movitec VV/VSV F1
A
Ø 64
P
Ø 64
90
G 3/8 F2
215 247
A
4 î Ø 14
130 184 200
Movitec VT/VST
90
E1
E2
215 247
Movitec V/VS; VV/VSV; VF/VSF; VCF VT/VST F1
1 2 3 4 5 6 7 8 9 10 11
185 205 260 260 260 315 315 315 315 315 315
160 175 220 220 220 265 265 265 265 265 265
F2
[mm] 641 356 696 366 837 472 863 498 890 525 1079 581 1106 608 1142 644 1169 671 1195 697 1304 724
F1
F2
651 706 847 873 900 1089 1116 1142 1169 1195 1304
366 376 482 508 535 591 618 644 671 697 724
A
G 1/4
G2
G2
Movitec VF/VSF Ø165 Ø125 Ø100 4 î Ø19
90 215 247
Movitec VCF
80 (90) 100 215 247
4 îØ14
130 184 200
Movitec V/VS
Movitec
130 184 300
4 îØ14
4 î Ø14
G 1/4
A
DN 50
Stages
DN 50
Dimensions
G 1/4
A
DN 50
Movitec V/VS, VV/VSF, VT/VST, VF/VSF, VCF
4 îØ18
DN 50
Ø165 Ø125 Ø100
40
G 1/4
130 184 300
High-pressure Pumps High-pressure In-line Pumps Movitec, 25B, n = 1750 rpm
Stages
E1
E2
Movitec VF/VSF; VCF
E1
F1
E2
5 6 7 8 9 10 11 12
F1
176 195 195 195 195 195 195 195 Ø185 Ø145 Ø121
G 3/8
F2
[mm] 141 938 668 145 1018 733 145 1083 798 145 1198 868 145 1263 933 145 1328 998 145 1393 1063 145 1458 1128
320
A
G 1/4
8 îØ19
240 280
A
Movitec VF/VSF
Ø185 Ø145 Ø121
Dimensions
G 1/4
8 îØ19
E1
E2
Movitec VF/VSF; VCF F1
1 2 3 4
A
176 176 176 176
[mm] 141 678 141 743 141 808 141 873
105
F2 408 473 538 603
240 280
4 îØ14
DN 65
Stages
170 210
4 îØ14
DN 65
Movitec VF/VSF; VCF Motor flange version with tapped hole
DN 65
105
DN 65
F2
170 210 320
Movitec VCF
Movitec
41
High-pressure Pumps High-pressure In-line Pumps Dimensions Motor flange version with throughholes
Movitec, 25B, n = 3500 rpm E1
Stages
E1
E2
P
Movitec
E2
VF/VSF; VCF
E1
E2
F1 3 4 5 6 7
F1
260 260 315 315 315 Ø185 Ø145 Ø121
F1
220 220 265 265 265
320
A
G 1/4
105 240 280
A
Movitec VF/VSF; VCF Motor flange version with tapped holes
Movitec VF/VSF
Movitec VF/VSF; VCF Motor flange version with throughholes
Ø185 Ø145 Ø121
A
Dimensions Motor flange version with tapped holes Stages
E1
E2
P
F1 1 2
185 160 220 190
105
Movitec VF/VSF; VCF
[mm] 693 818
F2
240 280
Movitec VCF 408 478
42
Movitec
G 1/4
8 îØ19
4 îØ14
DN 65
A
170 210
4 îØ14
DN 65
F2
G 3/8
DN 65
P
F2
DN 65
8 îØ19
G 3/8
[mm] 300 999 300 1064 350 1292 350 1357 350 1422
170 210 320
F2 634 699 794 859 924
High-pressure Pumps High-pressure In-line Pumps Movitec, 40B, n = 1750 rpm
Stages
E1
E2
P
Movitec VF/VSF; VCF F1
E1
E2
8 9 10
E2
Ø200 Ø160 Ø132
F1
A
365 G 1/4 DN 80
8 îØ19
F1
P G 3/8
G 3/8
F2
F2
[mm] 260 192‘ 300 1508 1123 260 192‘ 300 1586 1201 260 192‘ 300 1664 1279
140
DN 80
E1
F2 266 306
Movitec VF/VSF
A
Ø200 Ø160 Ø132
Movitec VF/VSF; VCF Motor version V18 Motor version V1
G 1/4
Dimensions Motor version V18
8 îØ19
P
Movitec VF/VSF; VCF F1
2 3 4 5
195 195 220 220
145 145 167 167
E1
E2
[mm] 895 973 1072 1150
F2 565 643 721 790
105 266 306
Ø200 Ø160 Ø138
Movitec VF/VSF; VCF F1
6 7
A
8 îØ19
P
F2
[mm] 260 192 300 1352 967 260 192 300 1430 1045
190 230
4 îØ14
Movitec VF/VSF - interchangeable range
Dimensions Motor version V1 Stages
DN 80
E2
G 1/4
DN 80
E1
DN 80
Stages
320
A
DN 80
A
190 230
4 îØ14
140 266 306
4 îØ14
190 230 365
Movitec VCF
Movitec
43
High-pressure Pumps High-pressure In-line Pumps Movitec, 40B, n = 3500 rpm
Ø200 Ø160 Ø132
320
A
G 1/4
E1
105 266 306
F1
DN 80
E2
DN 80
8 îØ19
190 230
4 îØ14
Movitec VF/VSF; PN 16, 25 - interchangeable range Ø200 Ø160 Ø138
P
365 G 1/4
G 3/8 DN 80
8 îØ19
140
DN 80
F2
A 266 306
Movitec VF/VSF; VCF Motor version V1
Movitec VF/VSF; PN 40
P
Movitec
Ø185 Ø145 Ø122
VF/VSF; VCF F1 40/1-1 40/1 40/2-2 40/2 40/3-2 40/3 40/4-2 40/4 40/5-2 40/5 40/6-2 40/6
266 266 315 315 315 315 350 400 400 400 400 400 A
[mm] 300 942 300 942 350 1183 350 1183 350 1261 350 1343 350 1421 400 1491 400 1569 400 1569 400 1647 400 1647
365
4 îØ14
105
266 306
Ø200 Ø160 Ø138
G 1/4
140 4 îØ14
Movitec VCF; DN 80
190 230
Movitec
A
8 îØ19
Movitec VF/VSF; PN 16, 25
44
190 230 320
4 î
Movitec VCF; DN 65
DN 80
DN 80
140
577 577 685 685 763 763 841 841 919 919 997 997
G 1/4 8 î M16
F2
266 306 G 1/4
8 îØ19
266 306
178 178 204 204 204 204 223 290 290 290 290 290
A
DN 65
E2
DN 80
E1
DN 65
Stages
DN 80
Dimensions Motor version V1
Ø200 Ø160 Ø132
190 230
4 îØ14
190 230 365
High-pressure Pumps High-pressure In-line Pumps Movitec, 60B, n = 1750 rpm
Stages
E1
E2
P
Movitec VF/VSF; VCF F1
E1
E1
E2
6 7
E2
Ø230 Ø180 Ø158
A
365 G 1/4
F1
F1 140
P
DN 100
DN 100
8 îØ19
G 3/8
F2
[mm] 260 192 300 1352 967 315 253 350 1430 1075
G 3/8
F2
266 306
F2
190 230
4 îØ14
Movitec VF/VSF
Movitec VF/VSF; VCF Motor version V1
8 îØ19
Dimensions Motor version V18 Stages
E1
E2
P
VF/VSF; VCF F1 2 3
F2
G 1/4
140
Movitec
[mm] 195 145 895 220 167 994
A
DN 100
Movitec VF/VSF; VCF Motor version V18
Ø230 Ø180 Ø154
A
DN 100
A
266 306
4 îØ14
190 230 365
Movitec VCF
565 643
Dimensions Motor version V1 Stages
E1
E2
P
Movitec VF/VSF; VCF F1
4 5
[mm] 260 192 300 1196 260 192 300 1274
F2 811 889
Movitec
45
High-pressure Pumps High-pressure In-line Pumps Ø254 Ø190 Ø158
A
G 1/4 DN 100
8 îØ23
E1 E2
140 266 306
F1
365
DN 100
Movitec, 60B, n = 3500 rpm
190 230
4 îØ14
Movitec VF/VSF; PN 25, 40 Ø230 Ø180 Ø154
A
8 îØ19
G 1/4
DN 100
G 3/8
F2
DN 100
P
140
A
266 306
Movitec VF/VSF; VCF Motor version V1
Movitec VCF; PN 16 Ø230 Ø190 Ø154
Dimensions Motor version V1 E2
P
8 îØ23
VF/VSF; VCF F1 1-1 1 2-2 2 3-2 3 4-2 4 5-2 5
266 315 315 315 350 400 400 400 466 466 A
[mm] 300 942 350 1105 350 1183 350 1265 350 1343 400 1413 400 1491 400 1491 450 1614 450 1614
F2 577 607 685 685 763 763 841 841 919 919
140 266 306
365
4 îØ14
DN 100
DN 100
140
190 230
Movitec VF/VSF; PN 16
46
Movitec
4 îØ14
Movitec VCF; PN 25, 40
G 1/4 8 îØ19
266 306
178 204 204 204 223 290 290 290 355 355
G 1/4
Movitec
DN 100
E1
365
A
DN 100
Stages
Ø230 Ø180 Ø158
190 230 365
4 îØ14
190 230
High-pressure Pumps High-pressure In-line Pumps Movitec, 90B, n = 1750, 3500 rpm E2
Ø230 Ø180 Ø158
E1
8 î Ø19
140 280 346
4 îØ14
Movitec VF/VSF, PN 16 Ø254 Ø190 Ø158
G 3/8 F1
8 î Ø22
F2
280 346
DN 100
DN 100
140 4 î Ø14
Movitec VF/VSF, PN 25/40
199 239 380
Ø230 Ø180 Ø158
Movitec VF/VSF; VCF Dimensions 1750 rpm Stages
E1
E2
Movitec VF/VSF; F1
F2
[mm] 266 179 1448 855 266 179 1448 855 266 179 1557 964
3-1 3 4-2
8 î Ø19
VCF F1
F2
1452 1452 1561
889 889 988
140 280 345
4 î Ø14
Movitec VCF, PN 16
Dimensions 3500 rpm Stages
E1
E2 VF/VSF; F1
315 315 315 350 450 450 450 466 466
206 206 206 225 350 350 350 373 373
1139 1139 1322 1371 1491 1600 1600 1622 1731
VCF
F2
F1
[mm] 1-1 1 2-2 2-1 2 3-2 3-1 3 4-2
Ø254 Ø190 Ø158
Movitec
637 637 776 776 776 885 885 885 994
F2 8 î Ø22
1143 1143 1326 1375 1495 1604 1604 1626 1735
641 641 780 780 780 889 889 889 998
140 280 345
4îØ14
Movitec VCF, PN 25/40
Movitec
47
High-pressure Pumps High-pressure In-line Pumps Movitec, LHS 6, n = 3500 rpm
Dimensions Stages
E1
E2
233 315 315 315
[mm] 162 896 206 1131 206 1190 206 1250
E1 E2
8 10 12 14
F1
140 100 78
90
F1
215 250
F2
DN 32
Movitec LHS6
130 190 365
Movitec LHS6
48
Movitec
4 î Ø15
DN 32
G 3/8
DN 32
4 î Ø18
130 190 365
F2 539 629 688 748
High-pressure Pumps High-pressure In-line Pumps ▪ Horizontal installation
Information on installation
(possible for motor ratings up to and including 7.5 kW in systems where the installation conditions do not allow vertical installation)
Standard: ▪ Vertical installation (⇨ Page 34) Optional:
Movitec 2B, 4B, 6B
H
b)
H
a)
50
B
50
D
A
D C
C
a) Pump bracket b) Pump set
Installation dimensions of the pump bracket depending on motor rating and connection type Motor rating
A
B
C
D
H
[kg]
Mat. No.
120 120 120 120 170
2 2.3 2.5 3 3.5
48895741 48895742 48895743 48895744 48895745
H [mm]
[kg]
Mat. No.
F, T, V 15B
-, E, T, V [kW] 0,37/0,55 kW (2-pole) 0,75/1,10 kW (2-pole) 1,50/2,20 kW (2-pole) 3,00/4,00 kW (2-pole) 5,50/7,50 kW (2-pole)
100 100 100 100 100
100 100 100 100 210
F2+49 F2+49 F2+47 F2+47 F2-18
F
[mm] 82 82 82 82 82
107 107 107 107 107
Movitec 10B, 15B
H
b)
H
a)
50
B
50
D
A
D C
C
a) Pump bracket b) Pump set
Installation dimensions of the pump bracket depending on motor rating and connection type Motor rating
A
B
C
D -, E, F, T, V 10B -, E 15B
[kW] 0,75/1,10 kW (2-pole)
130
130
F2+49
[mm] 111,5
121,5
140
2.786
01338571
0,55/0,75 kW (4-pole) 1,50/2,20 kW (2-pole)
130
130
F2+47
111,5
121,5
140
2.799
01338572
1,10/1,52 kW (4-pole)
Movitec
49
High-pressure Pumps High-pressure In-line Pumps Motor rating
A
B
C
D -, E, F, T, V 10B -, E 15B
H [mm]
[kg]
Mat. No.
F, T, V 15B
[kW] 3.00/4.00 kW (2-pole)
130
130
F2+47
[mm] 111,5
121,5
140
2.766
01338573
2,20/4,00 kW (4-pole) 5.50/7.50 kW (2-/4-pole)
130
210
F2-18
111,5
121,5
170
3.116
01338574
D
H
[kg]
Mat. No.
136,5 136,5 136,5
170 170 170
2.799 2.799 3.116
1498693 1498694 1498695
Movitec 25B
H
b)
H
a)
50
B
50
D
A
D C
C
a) Pump bracket b) Pump set
Installation dimensions of the pump bracket depending on motor rating and connection type Motor rating
A
[kW] 1,50/2,50 kW (2-pole) 3,00/4,00 kW (2-pole) 5,50/7,50 kW (2-pole)
B
C [mm]
170 170 170
180 180 210
F2+47 F2+47 F2-16
Movitec 40B, 60B b)
B
40
H
A
H
a)
40
D
C
D
C
a) Pump bracket b) Pump set
Installation dimensions of the pump bracket depending on motor rating and connection type Motor rating
A
B
[kW] 3.00/4.00 kW (2-pole)
190
180
2.20/4.00 kW (4-pole) 5.50/7.50 kW (2-/4-pole)
190
250
C
D
H
[kg]
Mat. No.
F2-16
165
180
2.799
01582128
F2-20
165
180
3.116
01582129
[mm]
50
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec 90B b)
B
40
H
A
H
a)
40
D
C
D
C
a) Pump bracket b) Pump set
Installation dimensions of the pump bracket depending on motor rating and connection type Motor rating [kW] 5.50/7.50 kW (2-/4-pole)
A
B
C
D
H
[kg]
Mat. No.
165
180
3.8
48895593
[mm] 210
250
F2-16
Scope of supply
Accessories
Depending on the model, the following items are included in the scope of supply:
Possible accessories:
▪ Pump
▪ Frequency inverter, see type series booklet PumpDrive (4070.5)
▪ Electric motor
Movitec
51
High-pressure Pumps High-pressure In-line Pumps General assembly drawing with list of components Movitec 2B, 4B, 6B
800 341 920.01 914.01 862 560 914.03 471 412.06
554.02 901.02 681 914.05 903.01 412.07 920.03 554.01 433 525.06 905 160 210 525.05 525.03 525.01 529 525.04 930 920.02 903.02 412.04
950 108.05 412.01 932 10-6 108.01 108.02 230 412.03 108.04 101 400 723 554.03 901.03
890 General assembly drawing Movitec 2B, 4B, 6B
List of components Part No. 10-6 101 108 160 210 230 341 400 412 433 471 525 529 554
Description Pump shroud Pump casing Stage casing Cover Shaft Impeller Drive lantern Gasket O-ring Mechanical seal Seal cover Spacer sleeve Bearing sleeve Washer
Part No. 560 681 723 800 862 890 901 903 905 914 920 930 932 950
Description Pin Coupling guard Flange Motor Coupling Baseplate Hexagon head bolt Vent plug Tie bolt Hexagon socket head cap screw Nut Safety device Circlip Spring
52
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec 10B, 15B
800 341 920.01 914.01 862 560 914.03 471 412.06 950
554.02 901.02 681 914.05 903.01 412.07 920.03 554.01 433 525.06 160 525.05 905 210 525.03 525.01 529 525.01 525.04 930 920.02
108.05 412.01 932 10-6 108.01 230 108.02 412.03 108.04 101 131 400 723 544.03 901.03
903.02 412.04
890
General assembly drawing of Movitec 10B, 15B
List of components Part No. 10-6 101 108 131 160 210 230 341 400 412 433 471 525 529 544
Description Pump shroud Pump casing Stage casing Inlet ring Cover Shaft Impeller Drive lantern Gasket O-ring Mechanical seal Seal cover Spacer sleeve Bearing sleeve Threaded bush
Part No. 554 560 681 723 800 862 890 901 903 905 914 920 930 932 950
Description Washer Pin Coupling guard Flange Motor Coupling Baseplate Hexagon head bolt Vent plug Tie bolt Hexagon socket head cap screw Nut Safety device Circlip Spring
Movitec
53
High-pressure Pumps High-pressure In-line Pumps Movitec 25B, 40B, 60B
800 341 920.01 914.01 862 560 914.03
554.02 901.02 681
433.02 412.06
903.01 412.07 920.03 554.01
412.01 932
433 160 525.06 525.05 905
108.05 230 412.03 108.01
525.02 210 525.03 525.02 10-6 529 525.01 525.04 930 920.02
108.02 509.03 131 101
903.02 412.04
890 General assembly drawing Movitec 25B, 40B, 60B
List of components Part No. 10-6 101 108 131 160 210 230 341 412 433 509 525 529 544
Description Pump shroud Pump casing Stage casing Inlet ring Cover Shaft Impeller Drive lantern O-ring Mechanical seal Intermediate ring Spacer sleeve Bearing sleeve Threaded bush
Part No. 554 560 681 800 862 890 901 903 905 914 920 930 932
Description Washer Pin Coupling guard Motor Coupling Baseplate Hexagon head bolt Vent plug Tie bolt Hexagon socket head cap screw Nut Safety device Circlip
54
Movitec
High-pressure Pumps High-pressure In-line Pumps Movitec 90B
901.04 554.04 801 722 890 341.01 914.05 681
914.01 862 580 500 904 914.03 471 412.06 525.07 433 412.06 160 932 525.05 525.03 108.01 230.01 230.02 412.03 525.02 529 108.02 525.01 230.01 525.02 108.01 525.03 230.01 412.01 503 525.04 930 920.02
914.02
903.01 412.07 920.03 554.01 341.02 10-6 905 210
101 903.02 412.04 890 General assembly drawing of Movitec 90B
List of components Part No. 108 160 230 341 412 433 471 500 503 525 529 554
Description Stage casing Cover Impeller Drive lantern O-ring Mechanical seal Seal cover Ring Impeller wear ring Spacer sleeve Bearing sleeve Washer
Part No. 580 681 722 801 862 890 901 904 914 920 930 932
Description Cap Coupling guard Double-flanged taper Flanged motor Coupling Baseplate Hexagon head bolt Grub screw Hexagon socket head cap screw Nut Safety device Circlip
Movitec
55
High-pressure Pumps High-pressure In-line Pumps Movitec LHS 6
901.04 554.04
801 722
920.05
341 862
554.02 901.02
560 903.01
914.01 920.01 901.01 681
411.01 433
920.03 554.01
412.01 108.05 10-6
932 525.05
230
905 210
412.03 108.01
525.03
108.02 108.04
525.02 529 525.01
412.01 101
930 920.02
525.04
411.04
920.02
General assembly drawing of Movitec LHS 6
List of components Part No. 10-6 101 108 210 230 341 411 412 433 525 529 554
Description Pump shroud Pump casing Stage casing Shaft Impeller Drive lantern Joint ring O-ring Mechanical seal Spacer sleeve Bearing sleeve Washer
Part No. 560 681 722 801 862 901 903 905 914 920 930 932
Description Pin Coupling guard Double-flanged taper Flanged motor Coupling Hexagon head bolt Vent plug Tie bolt Hexagon socket head cap screw Nut Safety device Circlip
56
Movitec
High-pressure Pumps High-pressure In-line Pumps Detailed designation Example: 1 M
2 o
3 v
4 i
5 t
6 e
7 c
8 V
9 C
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 F 0 9 0 / 0 2 1 B 1 A 1 3 E 0 0 1 3 2 5 A A X
Position 1-7: designation
Position 17: number of reduced stages
Code Movitec
Code 1 2
Description Movitec
Position 8-9: design Code VVC VM VS LHS
Description 1.4301 1.4301/GG 1.4301/monobloc motor 1.4401/1.4404 1.4404
Position 10: connection type Code E F T V
Description Oval flange External thread Round flange Tri-clamp coupling Victaulic coupling
Position 11-13: size Code 002 004 006 010 015 025 040 060 090
Description Size 2 Size 4 Size 6 Size 10 Size 15 Size 25 Size 40 Size 60 Size 90
Position 15-16: number of stages Code 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 24 26 28 30
Description 1 stage 2 stages 3 stages 4 stages 5 stages 6 stages 7 stages 8 stages 9 stages 10 stages 11 stages 12 stages 13 stages 14 stages 15 stages 16 stages 17 stages 18 stages 19 stages 20 stages 21 stages 22 stages 24 stages 28 stages 28 stages 30 stages
Description No reduced stage One reduced stage Two reduced stages
Position 18: generation Code A B
Description Previous generation New generation
Position 19: Standard of connection Code 0 1 2 3 4 5 6 7 8 9
Description Victaulic / no standard EN 1092 ASME B16.1 JIS B2238 EN ISO 228-1 ASME B16.5 oval flange DIN 32676 EN ISO 228-1 ISO 7-1 ASME B16.5 round flange
Position 20: material variant Code A B C D E F G H K L M N O P Q R S T U
Description 304 - EN-GJL-250 - EN-GJL-250 304 - EN-GJL-250 - 304 304 - EN-GJL-250 - EN-GJS-400-15 304 - EN-GJS-400-15 - EN-GJL-250 304 - EN-GJS-400-15 - 304 304 - 304 - EN-GJL-250 304 - 304 - EN-GJS-400-15 304 - 304 - 304 304 - 316 - EN-GJS-400-15 304 - 316 - EN-GJL-250 304 - 316 - 304 316 - EN-GJS-400-15 - EN-GJL-250 316 - EN-GJS-400-15 - 304 316 - 304 - EN-GJL-250 316 - 304 - 304 316 - 316 - EN-GJL-250 316 - 316 - EN-GJS-400-15 316 - 316 - 304 EN-GJL-250 -EN-GJL-250 -EN-GJL-250
Position 21-22: seal code Code 11 12 13 14 15 16 18 20 21 22 23 24
Description B Q1 E G G B Q1 V G G Q1 B E G G Q1 B V G G U3 U3 X4 G G U3 U3 V G G U3 B E G G Q1 A E G G Q1 A V G G Q1 A X4 G G Q1 B E G G Q1 Q1 V G G
Movitec
57
High-pressure Pumps High-pressure In-line Pumps Code 28 29
Description Q1 Q1 X4 G G Q1 Q1 E G G
Position 23: mechanical seal design Code F E C
Description "Fixed" design "Easy access" design Cartridge design
Position 24: drive Code P A S N 0
Description With PumpDrive ATEX IEC Standard IEC NEMA standard Without motor
Position 25-28: motor rating and number of poles Code 0024 0032 0034 0052 0054 0056 0071 0072 0074 0080 0090 0100 0112 0112 0114 0132 0132 0143 0145 0152 0154 0160 0180 0182 0184 0192 0200 0215 0222 0224 0225 0252 0256 0284 0286
Description 0.25 kW, 4-pole 0.37 kW, 2-pole 0.37 kW, 4-pole 0.55 kW, 2-pole 0.55 kW, 4-pole NEMA 58c IEC 071 0.75 kW, 2-pole 0.75 kW, 4-pole IEC 080 IEC 090S/L IEC 100L 1.1 kW, 2-pole IEC 112M 1.1 kW, 4-pole 1.3 kW, 2-pole IEC 132S/M NEMA 143TC NEMA 145TC 1.5 kW, 2-pole 1.5 kW, 4-pole IEC 160M/L IEC 180M/L NEMA 182TC NEMA 184TC 1.85 kW, 2-pole IEC 200L NEMA 215TC 2.2 kW, 2-pole 2.2 kW, 4-pole IEC 225M 2.5 kW, 2-pole NEMA 256TC NEMA 284TSC NEMA 286TSC
Code 0302 0304 0324 0326 0352 0364 0402 0404 0462 0552 0554 0752 0754 1002 1102 1252 1502 1852 2002 2202 2402 2802 3002 3702 3802 4502
Description 3.0 kW, 2-pole 3.0 kW, 4-pole NEMA 324TSC NEMA 326TSC 3.3 kW, 2-pole NEMA 364TSC 4.0 kW, 2-pole 4.0 kW, 4-pole 4.6 kW, 2-pole 5.5 kW, 2-pole 5.5 kW, 4-pole 7.5 kW, 2-pole 7.5 kW, 4-pole 10.0 kW, 2-pole 11.0 kW, 2-pole 12.5 kW, 2-pole 15.0 kW, 2-pole 18.5 kW, 2-pole 20.0 kW, 2-pole 22.0 kW, 2-pole 24.0 kW, 2-pole 28.0 kW, 2-pole 30.0 kW, 2-pole 37.0 kW, 2-pole 38.0 kW, 2-pole 45.0 kW, 2-pole
Position 29: mains frequency Code 5 6
Description 50 Hz 60 Hz
Position 30: motor voltage Code A B C D E F G J K L M
Description 230/400 V - IE1 400/690 V - IE1 230/400 V - IE2 400/690 V - IE2 EXM IEC - DP EXM IEC - TBH EXM NEMA 400/690 V - IE 2 EXM IEC - Movitec 400/690 V - IE 2/PDX 230 V - single-phase
Position 31: PumpMeter Code A W
Description With PumpMeter Without PumpMeter
Position 32: standard design Description One or several non-standard components
Code X
58
Movitec
19.05.2014 1798.561/05-US
KSB Aktiengesellschaft 67225 Frankenthal • Johann-Klein-Str. 9 • 67227 Frankenthal (Germany) Tel. +49 6233 86-0 • Fax +49 6233 86-3401 www.ksb.com
View more...
Comments
