Download KSB ITUR New Automatic Test Bench...
C
M
Y
CM
MY
CY CMY
K
New Automatic Test Bench for Pumps
commitment = innovation = technology = solution = service = trust
KSB ITUR Spain, S.A. P.O. Box, 41 20800 ZARAUTZ (Gipuzkoa) Spain
[email protected]
C
CLOSED CIRCUIT TEST BENCH
M
Y
CM
MY
CY CMY
K
This closed circuit design applies to six of the nine beds to test "End Suction" and "In-Line" pumps. All beds are connected to an independent cooling system through a heat exchanger. This ensures that tests can be developed at a temperature below the maximum
Since April 2010, KSB ITUR hosts in his headquarters in Zarautz, the New Automatic Test Bench for Pumps that will provide up to 75 pumps inspected daily provided with complete protocols (Q, H, Pabs, efficiency and NPSH). KSB Group Test specialists from Germany, Brazil and KSB ITUR itself have worked together in the design, development and
stated by the norms.
construction of this Automatic Unit. This combination of knowhow, makes this unit one of the most complete and modern Test Bench facilities in the world.
The bench allows NPSH measurement in each flow point by means of depressurization inside the tank (up to 50 mbar of absolute pressure) or pressurizing it (up to 5 bar absolute).
The main purpose is to energize and streamline the pump assembly and allow pump inspections from routine test operations to special and long-term tests.
The new test bench allows testing pump units up to 710 kW including variable speed by frequency converter.
Besides the new test bench including 9 test beds, following exiting test benches are available:
commitment = innovation Our Know-How
Soundproof booth equipped test bench and protected against
Technology
Engineering
gas emissions, emulates the most rigorous and demanding
Data acquisition system, signal processing, calibration, test
KSB self developed software for management and calculation of
standards of safety and operation that may take place in fire-
parameter calculation and fully automatic valve system.
tests, as well as its graphic and written documentation, allows
fighting equipment.
the standardization of test procedures to customer requirements
FIRE-FIGHTING
service = trust TEST BENCH FOR TRAINING AND SERVICE
Next-generation facility developed by KSB provided with process management modules by interconnection
technology = solution
of several test beds and even with external networks.
In order to boost the pump production capacity of the company and make it independent from of other activities, a test bench
This will enable work in sync and in real time with new
for exclusive use of activities related to the Training Centre and
test benches in Frankenthal and Halle (Germany). In the near future, other KSB Group production centers will join this system of interconnected test benches.
to test pumps repaired by our After Sales Department.
OPEN CIRCUIT TEST BENCH
The open circuit test bench contains two test beds, which are designed to test high flow horizontal and vertical centrifugal pumps
This will also set up a Global Test Complex in which
as well as submersible, reciprocating or eccentric rotor pumps.
the production centers will share information, processes
The bench is provided with two complemented tanks of 180 m3
and data, improving significantly the service
capacity. These tanks are properly connected to the cooling
to customers wherever they are.
systems and have two open connections to standard pumps. FEATURES: Area: 1.000 m2 No. of test beds: 9 Installed power: 1.600 KVA
Control booth equipped with multiple computer system can control up to 5 pumps with variable speed simultaneously on all of them.
With this new unit KSB ITUR test facilities are configured in a way that most of plant pump operation conditions can be simulated.
Speed: variable by frequency converter Q per pump: up to 4.500 m3 / h H per pump: up 400 m (40 bar) Max DN: DN 600 Minimum NPSH 0,3 m Maximum NPSH 49 m Inspection with full protocol: up to 75 pumps / day
OIL TEST STAND
This test bench can test gear or screw pumps with clean and viscous fluids.
C
CLOSED CIRCUIT TEST BENCH
M
Y
CM
MY
CY CMY
K
This closed circuit design applies to six of the nine beds to test "End Suction" and "In-Line" pumps. All beds are connected to an independent cooling system through a heat exchanger. This ensures that tests can be developed at a temperature below the maximum
Since April 2010, KSB ITUR hosts in his headquarters in Zarautz, the New Automatic Test Bench for Pumps that will provide up to 75 pumps inspected daily provided with complete protocols (Q, H, Pabs, efficiency and NPSH). KSB Group Test specialists from Germany, Brazil and KSB ITUR itself have worked together in the design, development and
stated by the norms.
construction of this Automatic Unit. This combination of knowhow, makes this unit one of the most complete and modern Test Bench facilities in the world.
The bench allows NPSH measurement in each flow point by means of depressurization inside the tank (up to 50 mbar of absolute pressure) or pressurizing it (up to 5 bar absolute).
The main purpose is to energize and streamline the pump assembly and allow pump inspections from routine test operations to special and long-term tests.
The new test bench allows testing pump units up to 710 kW including variable speed by frequency converter.
Besides the new test bench including 9 test beds, following exiting test benches are available:
commitment = innovation Our Know-How
Soundproof booth equipped test bench and protected against
Technology
Engineering
gas emissions, emulates the most rigorous and demanding
Data acquisition system, signal processing, calibration, test
KSB self developed software for management and calculation of
standards of safety and operation that may take place in fire-
parameter calculation and fully automatic valve system.
tests, as well as its graphic and written documentation, allows
fighting equipment.
the standardization of test procedures to customer requirements
FIRE-FIGHTING
service = trust TEST BENCH FOR TRAINING AND SERVICE
Next-generation facility developed by KSB provided with process management modules by interconnection
technology = solution
of several test beds and even with external networks.
In order to boost the pump production capacity of the company and make it independent from of other activities, a test bench
This will enable work in sync and in real time with new
for exclusive use of activities related to the Training Centre and
test benches in Frankenthal and Halle (Germany). In the near future, other KSB Group production centers will join this system of interconnected test benches.
to test pumps repaired by our After Sales Department.
OPEN CIRCUIT TEST BENCH
The open circuit test bench contains two test beds, which are designed to test high flow horizontal and vertical centrifugal pumps
This will also set up a Global Test Complex in which
as well as submersible, reciprocating or eccentric rotor pumps.
the production centers will share information, processes
The bench is provided with two complemented tanks of 180 m3
and data, improving significantly the service
capacity. These tanks are properly connected to the cooling
to customers wherever they are.
systems and have two open connections to standard pumps. FEATURES: Area: 1.000 m2 No. of test beds: 9 Installed power: 1.600 KVA
Control booth equipped with multiple computer system can control up to 5 pumps with variable speed simultaneously on all of them.
With this new unit KSB ITUR test facilities are configured in a way that most of plant pump operation conditions can be simulated.
Speed: variable by frequency converter Q per pump: up to 4.500 m3 / h H per pump: up 400 m (40 bar) Max DN: DN 600 Minimum NPSH 0,3 m Maximum NPSH 49 m Inspection with full protocol: up to 75 pumps / day
OIL TEST STAND
This test bench can test gear or screw pumps with clean and viscous fluids.
C
CLOSED CIRCUIT TEST BENCH
M
Y
CM
MY
CY CMY
K
This closed circuit design applies to six of the nine beds to test "End Suction" and "In-Line" pumps. All beds are connected to an independent cooling system through a heat exchanger. This ensures that tests can be developed at a temperature below the maximum
Since April 2010, KSB ITUR hosts in his headquarters in Zarautz, the New Automatic Test Bench for Pumps that will provide up to 75 pumps inspected daily provided with complete protocols (Q, H, Pabs, efficiency and NPSH). KSB Group Test specialists from Germany, Brazil and KSB ITUR itself have worked together in the design, development and
stated by the norms.
construction of this Automatic Unit. This combination of knowhow, makes this unit one of the most complete and modern Test Bench facilities in the world.
The bench allows NPSH measurement in each flow point by means of depressurization inside the tank (up to 50 mbar of absolute pressure) or pressurizing it (up to 5 bar absolute).
The main purpose is to energize and streamline the pump assembly and allow pump inspections from routine test operations to special and long-term tests.
The new test bench allows testing pump units up to 710 kW including variable speed by frequency converter.
Besides the new test bench including 9 test beds, following exiting test benches are available:
commitment = innovation Our Know-How
Soundproof booth equipped test bench and protected against
Technology
Engineering
gas emissions, emulates the most rigorous and demanding
Data acquisition system, signal processing, calibration, test
KSB self developed software for management and calculation of
standards of safety and operation that may take place in fire-
parameter calculation and fully automatic valve system.
tests, as well as its graphic and written documentation, allows
fighting equipment.
the standardization of test procedures to customer requirements
FIRE-FIGHTING
service = trust TEST BENCH FOR TRAINING AND SERVICE
Next-generation facility developed by KSB provided with process management modules by interconnection
technology = solution
of several test beds and even with external networks.
In order to boost the pump production capacity of the company and make it independent from of other activities, a test bench
This will enable work in sync and in real time with new
for exclusive use of activities related to the Training Centre and
test benches in Frankenthal and Halle (Germany). In the near future, other KSB Group production centers will join this system of interconnected test benches.
to test pumps repaired by our After Sales Department.
OPEN CIRCUIT TEST BENCH
The open circuit test bench contains two test beds, which are designed to test high flow horizontal and vertical centrifugal pumps
This will also set up a Global Test Complex in which
as well as submersible, reciprocating or eccentric rotor pumps.
the production centers will share information, processes
The bench is provided with two complemented tanks of 180 m3
and data, improving significantly the service
capacity. These tanks are properly connected to the cooling
to customers wherever they are.
systems and have two open connections to standard pumps. FEATURES: Area: 1.000 m2 No. of test beds: 9 Installed power: 1.600 KVA
Control booth equipped with multiple computer system can control up to 5 pumps with variable speed simultaneously on all of them.
With this new unit KSB ITUR test facilities are configured in a way that most of plant pump operation conditions can be simulated.
Speed: variable by frequency converter Q per pump: up to 4.500 m3 / h H per pump: up 400 m (40 bar) Max DN: DN 600 Minimum NPSH 0,3 m Maximum NPSH 49 m Inspection with full protocol: up to 75 pumps / day
OIL TEST STAND
This test bench can test gear or screw pumps with clean and viscous fluids.
C
M
Y
CM
MY
CY CMY
K
New Automatic Test Bench for Pumps
commitment = innovation = technology = solution = service = trust
KSB ITUR Spain, S.A. P.O. Box, 41 20800 ZARAUTZ (Gipuzkoa) Spain
[email protected]
C
M
Y
CM
MY
CY CMY
K
New Automatic Test Bench for Pumps
commitment = innovation = technology = solution = service = trust
KSB ITUR Spain, S.A. P.O. Box, 41 20800 ZARAUTZ (Gipuzkoa) Spain
[email protected]
