February 12, 2017 | Author: martdot73490 | Category: N/A
here is information showing a fully functioning free energy generator.this is info you need to build it. its a kit. some...
$20 Finder’s Fee
3385
Kit to Build Fully Functional Free Energy Generator Contact: www.youtube.com/watch?v=nA2KtZ45nXA www.potentialtec.com Phone: (208) 772-4514 Mailing Address: Truth In Heart, 10183 N. Aero Dr Ste 3., Hayden, ID 83835 The information provided in the following pages is being provided without charge and is for your convenience only. We suggest you go to the link above to access the most current and up to date information offered by this provider. The following pages may be subject to copyright.
1
Last Updated Feb 8, 2009
Truth In Heart Credit Card Ordering Center. We Accept Credit Cards With or Without Paypal, and over phone. After clicking 'add to cart' for each item, please wait for the paypal secure screen to pop up. All but tiny orders are shipped USPS Priority Mail. We can make up special orders not listed below.
Radiant Energy Technology We are also selling Bedini Energenx Battery Chargers through Renaissance Charge LLC: r-charge.com
Bedini Books | Bedini DVDs | Monopole sentaion DVD | Partial Parts Kit for Bedini SSG Energizer| Large 10 Pole Monopole | Classic 3 Pole Monopole | Advanced SSG Energizer | Magnetic Window Motor Kits | 10 Extra Spools | 8 Extra Magnets | R60 Welding rods | Transistors | Bulbs | 6" Brushless Fan Kit | 10" Brushless Fan Kit | Extra Capacitors | Magnet Wire | Custom Coils | Bipolar Circuit | Full Bipolar Kit | Sequential Circuits | Neodymium Magnets | 3Amp DC Meter | Donations Exposing Mysticism and FE Hoaxs Click here for:
Bedini Books and Bedini DVDs Feb. 2008 DVD BEDINI MONOPOLE MOTOR ENERGIZER PRESENTATION An Overview and Demonstration of Basic Concepts, Building Instrctions, and Testing. Improvement and complete refilming of the 2007 video put on Google Video. $15 (shipping included) U.S.A. standard NTSC video signal $17 (Basic International shipping included) PAL video signal
Partial Parts Kit for Bedini SSG Motor Energizer http://tech.groups.yahoo.com/group/Bedini_Monopole3 See our full SSG Presentation page for pictures and video of the model setup. Most of the parts needed to build the Energizer
Now comes with full circuit board, resistor jumper addition, and wire terminal.
2
Includes a tiny bottle of drops of xcelplus lube And New Feb 2008 Presentation DVD mentioned above. Order parts for what we are building on the list. Parts as shown in photos will be: MJL21194 Transistor, 8 ceramic 8 magnets (3/8 by 1 7/8 by 7/8 ceramic grade 8 magnets) (for bigger wheels we recommend 12-24 magnets below), two diodes, one resistor, 1 potentiometer, one neon bulb, one small piece of aluminum with some transistor grease between it and the transistor, 2 coils of wire wound bifilar on a spool with the welding rods cut and fitted in the spool as the core. For above parts excluding a rotor, frame, shaft, bearings, screws, batteries, battery wires, clips, glue and tape, click below: $100 (USA/Canada shipping included) $115 International orders (shipping included) Full SSG circuit board. Resistor jumper addition, and contact terminal with above kit only, or by special order.
$15 (USA/Canada shipping included) $20 International orders (shipping included)
Large Bedini 10 Pole Monopole.
Monopole replication of the large classic Energizer. This kit is made available because hundreds of people have asked for it over the years. We are providing a service to such people so that they can experiment with this technology and not have to spend tens of thousands of dollars having this system made up by machinists. It is not fully assembled and will not be assembled for people upon request. It is for learning and research purposes. Experiment at your own risk. Kit is molded and machined to the highest quality. This kit has 10 3" motor coils and a 17" aluminum rotor. 80 wires with 80 circuits on 10 circuit boards. It has an aluminum base frame with plexy glass top. You will be able to run the machine not only at 12V and 24V imputs, but over 100V. The larger the battery bank used the more you will get out of it (provided the batteries are in good condition). The system allows for the charging bank to be considerably higher voltage than the primary battery bank (or the same if desired). Also included is a generator coil that powers LEDs to light up the Bedini logo and clear plastic. Includes 80 SSG circuits, heat sink and pads, wire to batteries, clips, small sample of xcelplus. Comes with instruction CD and SSG DVD sold above.
3
Customer assembles rotor, frame and circuit. We will soon have an additional system (for additional cost) that will attach to this 10 coiler that will function like the early Bedini Energizer system replicated by Jim Watson. It will consist of a rotor with magnets, and energizer coils with frame assembly. It will allow for back charging the primary battery bank or powering additional loads isolated from the 10 coiler (see below). The 10 coiler can be run with some of the motor coils replaced with one wire energizer coils for the same purposes. Or this system can be run as a 20 or 30 coiler for additional cost (see below). Orders placed now ship approximately mid to late Jan. 2010. All orders shipped in several boxes. Half the parts will ship mid January. $4200 10 Pole Monopole (USA/Canada shipping included) $4400 10 Pole Monopole (International shipping included)
10 Energizer coils added to the 10 coiler kit.
$2500 10 Energizer coils and assembly (USA/Canada shipping included) $2800 10 Energizer coils and assembly (International shipping included)
Additional 10 coils to make 20 or 30 coils on the same frame. Includes all additional parts to make 10 more coils and circuits with additional backing plate, for double the power and output.
4
$3400 10 more Monopole coils, frame, and 80 circuits (USA/Canada shipping included) $3700 10 more Monopole coils, frame, and 80 circuits (International shipping included)
Classic Bedini 10 Pole Monopole Circuit board (for 8 SSG circuits). The circuit board has the potential for 8 SSG circuits with neon bulbs holes, diode holes, and several other features. The above kit comes with all circuit parts, including a switch that truns off the board through the trigger wire buss. That is, the trigger wire coming off the master coil (other side goes to negative) comes to the board at one hole. There is also another hole on the board for another wire to connect to go to the next board for multiboard systems like this ten coiler. This then can connect to a switch so that the board can turn off entirely (John's "sense" switch). This is nice on such a big system when you are wanting flexibility for experimentation. From there the buss is in series with a balance resistor, and from there the buss connects to each base resistor, either with a wire terminal block (as provided in the kit), or just directly to 8 resistors. The terminal block allows for easy swapping of resistors (as well as removal of coil) without having to unsolder the board. The board was made as small as possible given the parts used and heat sinking. The transistors are mounted upsidedown so that their backing faces away from the board onto an aluminum sink. Now Shipping.
$15 10 Pole Monopole Circuit board (USA shipping included) $20 10 Pole Monopole Circuit board (International shipping included) $100 10 Pole Monopole Circuit board (Ten boards) (USA shipping included)
5
$115 10 Pole Monopole Circuit board (Ten boards) (International shipping included)
Classic Bedini 3 Pole Monopole.
Short Youtube video Classic Monopole replication of the Energizer. Kit is molded and machined to the highest quality. This kit has three 1.5" motor coils and a 3" aluminum rotor, with aluminum flywheel. Also included is a generator coil that powers 12 LEDs, which could also be used to do other work, like recharge the primary battery. May eventually include a commutator on the back to pulse the stored charge from a capacitor. Includes three SSG circuits, heat sink and pads, wire to batteries, clips, potentiometer, spst switch, bottle of xcelplus. Comes with instruction CD and SSG DVD sold above. Now Shipping. $250 3 Pole Monopole (USA/Canada shipping included) $280 3 Pole Monopole (International shipping included)
Advanced Bedini Monopole and Solid State Energizer.
This kit includes all of the above SSG kit (DVD also), and parts for an advanced inverted circuit on the back end, and parts for a solid state circuit. Instructions to be provided. A larger heat sink is provided than above kit. Includes 4' of wire (not all shown), a project box with wire terminals and grommet, and switches to switch between motor function and solid state function, and to switched between two different capacitor values for different kinds of charging purposes. Prototype picture shown is not exactly as parts look. A slightly larger project box and 3 different potentiometers are provided for easier mounting and adjustment. The solid state function does not need the wheel and magnets. The coil shown in the picture is three #23 wire, approx. 200' and 450 winds, twisted. This is the second option below. First option is for the above coil with two wires (#23, #26) in parallel not twisted, 900 winds. Kit with 900 winds of #23 and #26 wire: $170 Advanced SSG-2 wire (USA/Canada shipping included) $190 Advanced SSG-2 wire (International shipping included) Kit with 200' of three #23 wires twisted: $185 Advanced SSG-3 wire (USA/Canada shipping included) $205 Advanced SSG-3 wire (International shipping included) Advanced Kit without the SSG partial parts kit Coil, Magnets, Lube, DVD, and SSG circuit for those who have that already. $70 Advanced SSG No Coil (USA/Canada shipping included) $90 Advanced SSG No Coil (International shipping included)
6
Bedini Window Motor Energizer Kit A
This 7" by 8" energizer is a carefully machined frame and rotor with 6 unique Bedini scalar manetic poles. The system uses the entire magnetic field of the super pole magnets for the greatest possible efficiency and energizer function. This toy size model is capable of running at 4 volts to possibly 48V or more, with 1 to 20 motor coils and circuits for a very large variation of power. The half inch solid brass shaft and carefully degreased bearings with xcelplus lube allows for very high rpm and strong motor function. The unique frame design allows for easy replacement of coils of different lengths and widths of wires, and easy mounting to holes or dowels. Design allows you to easily take it apart, and to mount it as you desire. We will make whatever custom size coil(s) you desire for this kit as shown on this webpage. The circuit provided is one full sequential bipolar circuit shown below. Also comes with two types of wire, terminal block, and two dpdt switches as shown in picture. The kit can be used to study motor or energizer function as well as serve as a platform for experiments for self-running capabilitities as outlined in the above Free Energy Generation book. A flywheel, commutator, or different types of loads can be attached to the rotor for additional experiments and benefits. System can be used to charge up one or more batteries of 2 to 200+ volts, or it can be run as a one battery system with the flip of a switch. S1 allows for two different motor speeds as well as center off position. Values of resistors and capacitor can also be substituted to personal preference. Coils can be left flat or bent around frame. Ships in box at just under 4 pounds. $200 Window Energizer Kit A (USA/Canada shipping included) $230 Window Energizer Kit A (International shipping included)
Bedini Window Motor Energizer Kit B
Picture shown above only shows one of the three coils provided. Rotor is 6" hexagon with 6" x 2" x 1" magnets. Comes with three motor coils and 3 bipolar sequential circuits, Hall triggering, heat sinks, wire, battery clips, etc. Coils will be formed for easy placement on motor. Requires easy assembly with instructions provided. Motor frame can hold more than 9 motor windings and can be run with high voltages to make for a lot of torque. Or it can be run slowly with very little imput (like 10ma @ 12V). Multistrand coils with additional circuitry can be ordered upon request. Weighs approximately 40 pounds. Shipping requires two boxes to reduce shipping costs. $600 Window Energizer Kit B (USA shipping included) $640 Window Energizer Kit B (Canada shipping included) $680 Window Energizer Kit B (Europe South America shipping included) $780 Window Energizer Kit B (Far East, Austiralia, NZ shipping included)
10 Spools used with Regular size Bedini Monopole Energizers.
7
3 3/4" H by 3.5" top and bottom, 3/4 bore.
$30 (USA shipping included) $20 (USA shipping NOT included--combined with above Monopole kit) $40 International orders (shipping included) $25 International orders (shipping NOT included--combined with Monopole kit)
5 Spools used with Bedini Monopole Energizers. $15 (USA shipping included) $10 (USA shipping NOT included--combined with above Monopole kit) $22 International orders (slow uninsured shipping included) $30 International orders (Priority shipping included) $12 International orders (shipping NOT included--combined with Monopole kit)
100 Spools used with SMALL size Bedini Monopole Energizers. 1.5" H x 1" W (top) 1.7" (base with holes), 1/4" bore. Strong plastic.
$100 (USA shipping included) $110 International orders (shipping included)
10 Small Spools used with SMALL Bedini Monopole Energizers. $20 (USA shipping included) $25 International orders (shipping included)
5 Small Spools used with SMALL Bedini Monopole Energizers. $15 (USA shipping included) $22 International orders
8 Ceramic Blocks 3/8 by 1 7/8 by 7/8 Grade 8 Magnets used with Bedini Monopole Energizers.
8
$20 (USA shipping included) $12 (USA shipping NOT included--combined with above Monopole or Fan kit) $36 International orders (shipping included) $16 International orders (shipping NOT included--combined with Monopole kit)
R60 1/16" Welding Rods, (no spool) 6 oz, 3 1/4" long, makes 3/4" core.
$13 (shipping not included) $15 (USA shipping included) $18 (International shipping included)
TRANSISTORS 2N3440 NPN
$2 (shipping not included) $4 (shipping included) MPS8599 PNP
$0.50 (shipping not included) $3 (shipping included) 2N3584 NPN
$6 (shipping not included) $9 (USA shipping included) 2N3440 NPN
$1 (shipping not included) $3 (shipping included) MJE3055 NPN
9
$1 (shipping not included) $3 (shipping included) MJE2955 PNP
$1 (shipping not included) $3 (shipping included) BD243C NPN
$1 (shipping not included) $3 (shipping included)
MJ15024G NPN
1 MJ15024G $4 (shipping not included) 1 MJ15024G $6 (shipping included) 5 MJ15024G $18 (shipping not included) 5 MJ15024G $22 (shipping included)
10 MJL21194 NPN Transistors used with Bedini Monopole Energizers.
$55 (USA shipping included) $50 (USA shipping NOT included--combined with above Monopole or Fan kit) $65 International orders (shipping included) $52 International orders (shipping NOT included--combined with Monopole kit)
Or 5 MJL21194 Transistors used with Bedini Monopole Energizers.
10
$30 (USA shipping included) $25 (USA shipping NOT included--combined with above Monopole or Fan kit) $36 International orders (shipping included) $27 International orders (shipping NOT included--combined with Monopole kit)
10 MJL21193 PNP Transistors used with Bedini Monopole Energizers.
$55 (USA shipping included) $50 (USA shipping NOT included--combined with above Monopole or Fan kit) $65 International orders (shipping included) $52 International orders (shipping NOT included--combined with Monopole kit)
Or 5 MJL21193 Transistors used with Bedini Monopole Energizers. $30 (USA shipping included) $25 (USA shipping NOT included--combined with above Monopole or Fan kit) $36 International orders (shipping included) $27 International orders (shipping NOT included--combined with Monopole kit) 2N6509 SCR
$2 (shipping not included) $5 (shipping included) Hall Effect Sensor Switch
$3 (shipping not included) $6 (shipping included) Reed Switch "Reed Switches 1 Form A 12mm AT 1015 OKI"
$1 (shipping not included)
11
$3 (shipping included) 555 Timer
$1 (shipping not included) $4 (shipping included)
SG3524N For Bedini Tesla Switch and Full Capacitor Pulser
$2 (shipping not included) $5 (shipping included)
H11D1 Optocoupler HV Phototransistor For Bedini Capacitor Pulser
$2 (shipping not included) $5 (shipping included)
Bulbs 0.026Amp Incandescent Wire Terminal Grain of Wheat Bulb
$1 (shipping not included) $2 (shipping included)
5 New Neon Ne-2 Bulbs Used with Bedini Monopole Energizers.
$7 (USA shipping included) $5 (USA shipping NOT included--combined with above Monopole or Fan kit) $10 International orders (shipping included) $5 International orders (shipping NOT included--combined with Monopole kit)
12
NOTE THAT TAPE MOTOR KIT IN DVD17 is the same as the Brushles Motor Fan Kits below:
BRUSHLESS MOTOR FAN KITS
Bedini 8 to 52V 5 Inch Brushless Motor Fan Full Kit
This kit gives you all the parts needed to construct the above pictured brushless motor Energizer. Does not come with tools, glue, solder, wire connectors, or battery clips. Energizer conversion ran with supply voltages from 8V to 52VDC (voltages over 36V may require better heat sink for transistors). Fan is 24VDC rated for 27W. Contains two of all the SSG circuit parts of the partial kit above plus more. Does not include any potentiometer but does have 4 2W resistors (builder can swap these resistors with others supplied to change speed, or use other values). Larger diodes included. Added to this is the 27W brushless fan shown. Also as shown, one plastic display container, two 2PDT switches (so batteries can be rotated), the circuit and battery wire, one capacitor, one pulser circuit, and one tiny amount of xcelplus lube. $70 (USA/Canada shipping included) $85 International orders (shipping included) Order FIVE Kits For only: $270 (USA/Canada shipping included)
Bedini 8 to 52V 6 Inch Brushless Motor Fan Full Kit Same kit as above but with large 6" fan.
Very low res. 7MB video of the fan running before and after it was converted to an Energizer. Better quality video of this. Overview and conversion of the fan is shown in a video with WMV format that will be sent on a CD with the kit: This is the lower quality Google video. Other videos and pictures are included. This is a little higher quality.
$90 (USA/Canada shipping included) $105 International orders (shipping included)
10 Inch Bedini 8-52V Brushless Motor Fan Full Kit
13
10 inch Brushless Energizer video. Same kit as above but with large 10" fan that is rated for 550CFMs (1.2A 24V). Energizer conversion ran with supply voltages from 8V to 52VDC (voltages over 24V require better heat sink for transistors). $160 (USA/Canada shipping included) $180 International orders (shipping included)
We also have 10 uf 250V yellow capacitors for $1 each.
Datasheet PDF $3 (includes shipping if you order nothing else) $1 WITH ORDER OF ANY ITEM ABOVE (shipping NOT included) Order any quantity.
We also have 560 uF 350V capacitors for $5 each. $5 (with order of something else with shipping)
9 to 11 Pound Spools of Magnet Wire
Shipping on second, fourth, sixth, etc., 10 pound spool is free for USA (as it fits in Priority F.R. Box), so click appropriate links below. Combine any two spools of wire. Substitutions of other thicker wire (#14 to #25) available upon request for same price, and thinner wire than #26 for slightly more cost. Magnet Wire is made and wound by Essex or other company and will vary from 9 to 11 pounds. Typical total weight is over 10 pounds, many are over 11 pounds. Spool is 6.4 oz. #23 Heavy insullation. (23 HVY GP/MR-200 CU6X3.5) #23 Wire $85 when shipping is not required due to combined ordering mentioned above (shipping NOT included). #23 Wire $95 (US shipping included) #23 Wire $108 (Canada shipping included) #23 Wire $122 (International shipping included) #26 Wire $85 when shipping is not required due to combined ordering mentioned above (shipping NOT included). #26 Wire $95 (US shipping included) #26 Wire $108 (Canada shipping included) #26 Wire $122 (International shipping included)
14
Custom Coils for Bedini Motors
Coils all hand wound for quality control. Made of Magnet wire shown above. Let us know
[email protected] what coil you want made for either the Bedini Window Motor or Monopole. Window coils not to be twisted, but monopole coils can be twisted as special order. Window Motor windings (100' lengths) for small kit including trigger wire(s): $15 100 Feet Parallel Coils of #23 and #26 magnet wire (shipping NOT included). $20 100 Feet Parallel Coils of #23 and #26 magnet wire (US/Canada shipping included). $30 100 Feet Parallel Coils of #23 and #26 magnet wire (International shipping included). $19 100 Feet Parallel Coils of #23, #26 and #26 magnet wire (shipping NOT included). $24 100 Feet Parallel Coils of #23, #26 and #26 magnet wire (US/Canada shipping included). $34 100 Feet Parallel Coils of #23, #26 and #26 magnet wire (International shipping included). $30 100 Feet Parallel Coils of 4 #23 and 2 #26 magnet wire (shipping NOT included). $38 100 Feet Parallel Coils of 4 #23 and 2 #26 magnet wire (US/Canada shipping included). $45 100 Feet Parallel Coils of 4 #23 and 2 #26 magnet wire (International shipping included). Secondary windings (100') for second and third coils not needing triggers. $18 100 Feet Parallel Coils of 3 #23 magnet wire (shipping NOT included). $23 100 Feet Parallel Coils of 3 #23 magnet wire (US/Canada shipping included). $33 100 Feet Parallel Coils of 3 #23 magnet wire (International shipping included). $32 100 Feet Parallel Coils of 6 #23 magnet wire (shipping NOT included). $40 100 Feet Parallel Coils of 6 #23 magnet wire (US/Canada shipping included). $48 100 Feet Parallel Coils of 6 #23 magnet wire (International shipping included). Window Motor windings (150' lengths) for small kit including trigger wire(s): $25 150 Feet Parallel Coils of #23 and #26 magnet wire (shipping NOT included). $30 150 Feet Parallel Coils of #23 and #26 magnet wire (US/Canada shipping included). $40 150 Feet Parallel Coils of #23 and #26 magnet wire (International shipping included). $29 150 Feet Parallel Coils of #23, #26 and #26 magnet wire (shipping NOT included). $34 150 Feet Parallel Coils of #23, #26 and #26 magnet wire (US/Canada shipping included). $44 150 Feet Parallel Coils of #23, #26 and #26 magnet wire (International shipping included). $40 150 Feet Parallel Coils of 4 #23 and 2 #26 magnet wire (shipping NOT included). $48 150 Feet Parallel Coils of 4 #23 and 2 #26 magnet wire (US/Canada shipping included). $55 150 Feet Parallel Coils of 4 #23 and 2 #26 magnet wire (International shipping included). Secondary windings (150') for second and third coils not needing triggers. $28 150 Feet Parallel Coils of 3 #23 magnet wire (shipping NOT included). $33 150 Feet Parallel Coils of 3 #23 magnet wire (US/Canada shipping included).
15
$43 150 Feet Parallel Coils of 3 #23 magnet wire (International shipping included). $42 150 Feet Parallel Coils of 6 #23 magnet wire (shipping NOT included). $50 150 Feet Parallel Coils of 6 #23 magnet wire (US/Canada shipping included). $58 150 Feet Parallel Coils of 6 #23 magnet wire (International shipping included). Bedini Monopole Coils on Spool with R60 Rod Cores: (free shipping on 2 or more coils under 20 pounds total) $40 100 Feet Parallel Coils of 2 #18 magnet wire (shipping NOT included). $46 100 Feet Parallel Coils of 2 #18 magnet wire (US shipping included). $56 100 Feet Parallel Coils of 2 #18 magnet wire (International shipping included). The Rest of the Below Wire is Twisted before Winding: $50 100 Feet Parallel Coils of 4 #18 magnet wire (shipping NOT included). $56 100 Feet Parallel Coils of 4 #18 magnet wire (US shipping included). $66 100 Feet Parallel Coils of 4 #18 magnet wire (International shipping included). Five Pound Coils (free shipping on 2nd, 3rd, and 4th under 20 pounds):
$80 100 Feet Parallel Coils of 8 #18 magnet wire (shipping NOT included). $93 100 Feet Parallel Coils of 8 #18 magnet wire (US shipping included). $106 100 Feet Parallel Coils of 8 #18 magnet wire (International shipping included). 150 Foot long coils twisted: $80 150 Feet Parallel Coils of 4 #18 magnet wire (shipping NOT included). $96 150 Feet Parallel Coils of 4 #18 magnet wire (US shipping included). $106 150 Feet Parallel Coils of 4 #18 magnet wire (International shipping included). 3 #23 Wire 200 Foot (about 450 winds) long coils twisted:
$50 200 Feet Parallel Coils of 3 #23 magnet wire (shipping NOT included). $63 200 Feet Parallel Coils of 3 #23 magnet wire (US shipping included). $76 200 Feet Parallel Coils of 3 #23 magnet wire (International shipping included). 8 #23 Wire 200 Foot long coils twisted: $70 200 Feet Parallel Coils of 8 #23 magnet wire (shipping NOT included). $83 200 Feet Parallel Coils of 8 #23 magnet wire (US shipping included). $96 200 Feet Parallel Coils of 8 #23 magnet wire (International shipping included). Energizer Coil, one wire #23 on 3.5" spool filled (approx. 5 pounds) with 1/16" R60 rods:
16
$60 Five Pound Energizer Coil Number 23 Wire (shipping NOT included). Order of 2nd, and 3rd is free shipping. $70 Five Pound Energizer Coil Number 23 Wire (US shipping included). $97 Five Pound Energizer Coil Number 23 Wire (International shipping included). 20 Pound 8" diameter Coil 81 #23 Wires Twisted for Multistrand Monopole or Solid State circuits: 6" high. Center of coil will be filled with welding R60 Welding Rods for a Core. Shipped in Flat Rate Priority box.
$270. 20 Pound 8" diameter Coil 81 #23 Wires Twisted (USA shipping included). $297. 20 Pound 8" diameter Coil 81 #23 Wires Twisted (International shipping included).
Bipolar Circuit Replacement of SSG Circuit for first SSG Kit.
Contians ONE of each 1k 3/4W pot, MJE2955, MJE3055, MPSA06, 2A bridge, 1N914 Resistors: 100 ohms, 220 ohms, 2* 470 ohms. Does not include wire, magnet wire, coil, rotor, frame, glue, magnets, batteries, capacitor, Amperemeter, tape, heat sink, shaft, S1, or solder. May include tiny circuit board. $25 CIRCUIT ONLY (USA shipping included) $35 CIRCUIT ONLY. International orders (shipping included)
Bipolar Circuit with Partial Motor Kit.
17
This contains the above Bipolar Circuit with the rest of the first SSG kit (magnets, coil, core rods, xcelplus lube, DVD). $100 (USA shipping included) $115 International orders (shipping included)
SMALL Sequential Bipolar Circuit for Bedini Magnetic Window Motor.
Click above picture and see circuit on right side. This is the same as above (circuit only) but with double the parts except for the capacitor and bridge. Contians TWO of each 1k 3/4W pot, MJE2955, MJE3055, MPSA06, 1N914, Resistors: 100 ohms, 220 ohms, 4.7k (if you want the other resistor values instead, let me know); Four 470 ohms resistors, and one 2A bridge, and one 10uf 250V capacitor. Does not include wire, magnet wire, coil, rotor, frame, glue, magnets, batteries, Amperemeter, tape, heat sink, shaft, S1, or solder. Order one or in packs of five for discount. $35 One Circuit only (USA shipping included) $45 One Circuit only. International orders (shipping included) Or order packs of five for larger multistrand systems: $85 Five Circuits (USA shipping included) $95 Five Circuits. International orders (shipping included)
LARGE Sequential Bipolar Circuit for Bedini Magnetic Window Motor.
Click above picture and see circuit on left side. May be used with 3 to 50V (if tranistors are kept under 150F) battery bank. This is the same as above but with larger transistors amd bridge Contians TWO of each 1k 3/4W pot, MJL21194, MJL21193, MPSA06, 1N914, Resistors: 100 ohms, 220 ohms, 4.7k, aluminum heatsinks (not as shown in picture), ; Four mica insulators, 470 ohms resistors, one 4A 1k bridge, and one 10uf 250V capacitor. Does not include wire, magnet wire, coil, rotor, frame, glue, magnets, batteries, Amperemeter, tape, shaft, S1, or solder. Order one or in packs of five for discount. $45 One Circuit only (USA shipping included) $55 One Circuit only. International orders (shipping included) Or order packs of five for larger multistrand systems:
18
$140 Five Circuits (USA shipping included) $160 Five Circuits. International orders (shipping included)
NEODYMIUM MAGNETS FOR MAGNETIC WINDOW MOTOR International orders need to contact us for shipping costs and details.
Six 0.5" x 0.5" x 1" Long Neodymium Iron Boron NdFeB Block Magnet Grade N42 Magnetized through 1" length, poles are on the 0.5x0.5" ends Approximate pulling force: 55 lbs 6 for $25 (USA/Canada shipping included) 6 for $45 (International shipping included) 12 for $45 (USA/Canada shipping included) 12 for $65 (International shipping included)
The above picture shows magnets that are actually half the size (1/2" x 1" x 2")
Video of John Bedini's motor in self-running mode using these magnets. Video of above pictured motor using half the magnet size.
Six 1" x 1"x 2" Neodymium NdFeB Block Magnets, Ni-Cu-Ni Plated Grade N42, stronger than N40, N35, N38 Magnetized through the 2" Length (poles are on the 1x1" surfaces) Approximate pulling force: 207 lbs Gauss Rating: 13200 6 for $95 (USA/Canada only shipping included) 6 for $115 (International shipping included)
Six 4" x 1" x 1" Thick Rare Earth Neodymium NdFeB Block Magnets, Grade N42, Nickel-Copper-Nickel 3Layer Coated
19
BrMax: 13300 gauss BHMax: 42 MGOe Magnetized through the 1" Thickness Approximate pulling force: 205 lbs 6 for $164 (USA/Canada only shipping included) 6 for $184 (International shipping included)
Six 4" x 2" x 2" Ni-Cu-Ni Plated Neodymium NdFeB Magnet Block N45 25% stronger than N35 Magnetized through the Thickness 2", poles are on the 4x2 surfaces pull force: 610 lbs 6 for $735 (USA/Canada only shipping included) 6 for $775 (International shipping included)
0-3A DC ANALOG WIDEVIEW PANEL METER.
0-3A DC Meter $11 (shipping not included)
30A DC ANALOG WIDEVIEW PANEL METER.
30A DC Meter $11 (shipping not included) Choose below if you would like to donate to further this ministry. All help is appreciated. Or choose below numbers to add additional shipping amounts. $1 $5 $10 $20 $50 $100 $200 $500 $1000
20
Our name is: Truth In Heart Our Address is: 10183 N. Aero Dr Ste 3. Hayden, ID 83835 Phone: (208) 772-4514 rickfriedrich at yahoo . com Thank you. Copyright © 2006-2010 Truth In Heart
21
