Kelly Cock

KELLY

AND

SAFETY VALVES

Ball-Type Kelly Valve Body Seat O-Ring Seal-Ring Stem O-Ring

Grease Fitting Plug

Operating Stem Seats

Ball Seal-Ring Body O-Ring Seat O-Ring Corrugated Spring Sub

The Ball-Type Kelly Valve provides a quick, sure shutoff in the drill string that can repay the cost of the valve quickly in mud savings and kick protection. The valve is designed to hold pressure in either direction. This valve can also be used as either an upper or lower kelly cock. It has an exclusive corrugated spring to ensure a positive seal. Standard pressure rating is 10,000-pound test, but higher ratings are available. The ball is stainless steel and closes easily. The full-bore kelly valve won’t interfere with running tools like core barrels or survey instruments. TIW also offers the Ball-Type Kelly Valve for H2S services, meeting all NACE standards.

Lower Kelly Cock As a lower kelly cock, the TIW Kelly Valve stops mud loss when the kelly is disconnected from the drill string. Just close the valve before disconnecting, and mud in the kelly and hoses stays there. By saving costly drilling fluids, the valve can pay for itself quickly. The rig floor and substructure stay much cleaner and safer as well. Its streamlined O.D. allows it to pass through the blowout preventer smoothly.

Ball-Type Kelly Valve

Upper Kelly Cock

Grease Fitting Plug Body Seat Seal-Ring Seat O-Ring Operating Stem Stem O-Ring Floating Insert Body O-Ring Ball Spring Sub

Ball-Type Safety Valve

The TIW Kelly Valve with left-hand threads is used as an upper kelly cock. Positioned between the kelly and swivel, it positively shuts off flow in the drill string at any time. The inline body design will not hang up on the catline or interfere with operations. These TIW Ball-Type Kelly Valves carry a guarantee of quality. Each is shipped with wrench, grease gun and one-pound can of lubricant. Specify size and connection from the following table.

Ball-Type Safety Valve The Ball-Type Safety Valve is designed to stab into the drill pipe or tubing at the rig floor and close quickly in case a well kicks. After weighting material is added to the mud, the kelly is reconnected, the valve opened and circulation begun. This is a full-bore valve. The ball-type design permits it to be compact, easy to handle and yet very strong. Standard test pressure is 10,000 pounds. Higher pressure ratings are available. The following table provides sizes and part numbers for the standard safety valves.

77

KELLY

78

AND

SAFETY VALVES

Engineering Data and Parts List For Ball-Type Kelly Valves Kelly Size, In. / Mm. Max. Body O.D., In. / Mm. Min. I.D., In. / Mm. Overall Length, In. / Cm. Approx. Weight, Lb. / Kg. Connection

Part

Qty.

Sub Seat W/Seal Ring Ball Body Operating Stem Spring Grease Fitting Operating Wrench Stem O-Ring Body O-Ring Seat O-Ring Seal Ring Major Repair Kit Seal Kit

1 2 1 1 1 1 1 1 1† 1† 2† 2†

21⁄2 / 63.5 35⁄8 / 92.1 13⁄8 / 34.9 26 / 66.0 75 / 34.0 23⁄8" (60.3) API IF 27⁄8" AOH 27⁄8" PAC

21⁄2 / 63.5 37⁄8 / 98.4 11⁄2 / 38.1 26 / 66.0 75 / 34.0 27⁄8" AOH 27⁄8" PAC 27⁄8" H-90

3 / 76.2 4 / 101.6 11⁄4 / 31.8 305⁄16 / 77.3 85 / 38.6 27⁄8" (73.0) API Reg.

3 / 76.2 41⁄8 / 104.8 13⁄4 / 44.5 307⁄16 / 77.3 90 / 41.0 27⁄8" (73.0) Hughes Slim Line H-90 23⁄8" (60.3) API IF

* 013386 006867 * 006866 001226 001147 006641 000734 000795 000790 000917 503087 503096

* 013385 006885 * 006884 001227 001147 006641 000734 000796 000792 000920 503240 503241

* 013388 006893 * 006892 001226 001147 006641 000734 000797 000790 000916 510188 503097

* 013387 006654 * 006653 001224 001147 006641 000734 000799 000794 000921 503089 503099 41⁄4 / 108.0 63⁄8 / 161.9 23⁄4 / 69.9 301⁄2 / 77.5 220 / 100.0 41⁄2" (114.3) FH 1 4 ⁄2" (114.3) X-Hole 41⁄2" (114.3) IF

Part

Qty.

Sub Seat W/Seal Ring Ball Body Operating Stem Spring Grease Fitting Operating Wrench Stem O-Ring Body O-Ring Seat O-Ring Seal Ring Major Repair Kit Seal Kit

1 2 1 1 1 1 1 1 1† 1† 2† 2†

31⁄2 / 88.9 41⁄2 / 114.3 2 / 50.8 301⁄4 / 76.8 165 / 75.0 27⁄8" (73.0) IF 7 2 ⁄8" (73.0) Reed F.O.

31⁄2 / 88.9 411⁄16 / 119.1 21⁄8 / 54.0 301⁄4 / 76.8 175 / 79.0 27⁄8" (73.0) IF 27⁄8" (73.0) Reed F.O.

* 013387 006654 * 006653 001224 001147 006641 000734 000799 000794 000921 503089 503099

* 013389 008683 * 006773 001220 001147 006641 000734 000751 000797 000922 503091 503095

* 013389 008683 * 006773 001220 001147 006641 000734 000751 000797 000922 503091 503095

* 013390 008684 * 006773 001218 001147 006641 000734 000751 000798 000923 503092 503100

41⁄4 / 108.0 63⁄8 / 161.9 211⁄16 / 68.3 301⁄2 / 77.5 220 / 100.0 31⁄2" (88.9) IF Hyd. PH-6

51⁄4 / 133.4 7 / 177.8 35⁄32 / 80.2 32 / 81.3 250 / 113.0 41⁄2" (114.3) FH

Part Numbers

31⁄2 / 88.9 47⁄8 / 123.8 27⁄16 / 61.9 301⁄16 / 76.4 120 / 54.0 31⁄2" (88.9) X-Hole

Kelly Size, In. / Mm. Max. Body O.D., In. / Mm. Min. I.D., In. / Mm. Overall Length, In. / Cm. Approx. Weight, Lb. / Kg. Connection

3 / 76.2 41⁄2 / 114.3 13⁄4 / 44.5 30 / 76.2 126 / 57.0 23⁄8" / 60.3 API IF

3 / 76.2 41⁄4 / 108.0 11⁄2 / 38.1 307⁄16 / 77.3 95 / 43.0 31⁄2" (88.9) API Reg. 27⁄8" PAC

31⁄2 / 88.9 31⁄2 / 88.9 5 / 127.0 51⁄4 / 133.4 2 / 50.8 27⁄16 / 61.9 305⁄16 / 77.0 30 / 76.2 175 / 79.0 165 / 75.0 27⁄8" (73.0) IF 4" (101.6) FH 31⁄2" (88.9) FH 31⁄2" (88.9) IF

51⁄4 / 133.4 ALL 7 / 177.8 73⁄4 / 196.9 1 1 3 ⁄4 / 82.6 3 ⁄4 / 82.6 32 / 81.3 32 / 81.3 250 / 113.0 319 / 145.0 41⁄2" (114.3) IF 65⁄8" (168.3) API 41⁄2" (114.3) X-Hole Reg. LH 51⁄2" (139.7) FH

Part Numbers * 013391 008682 * 006773 001223 001147 006641 000734 000805 000800 000924 503083 503101

* 013392 006645 * 006644 001218 001147 006641 000734 000753 000798 000923 503084 503094

* 013391 008682 * 006644 001223 001147 006641 000734 000805 000800 000924 503243 503244

* 013393 006813 * 006826 001219 001147 006651 000796 000762 000807 000927 503082 503102

Popular sizes shown. Other sizes available from your TIW representative. †Parts comprising seal kit. *Contact the TIW engineering department for part numbers.

* 013393 006813 * 006826 001219 001147 006651 000796 000762 000807 000927 503082 503102

* 013394 008681 * 006840 001221 001147 006651 000796 000768 000812 000930 503085 503103

* 013394 008681 * 006840 001221 001147 006651 000796 000768 000812 000930 503085 503103

* 013394 008681 * 006853 001221 001147 006651 000796 000768 000812 000930 503086 503103

KELLY

AND

SAFETY VALVES

79

Engineering Data and Parts List For Ball-Type Safety Valves Tool Body, Max. O.D., In. / Mm. Min. I.D., In. / Mm. Approx. Total Length, In. / Cm. Approx. Weight, Lb. / Kg. Connection

21⁄2 / 63.5 ⁄16 / 23.8 22 / 55.9 20 / 9.0 1" (25.4) Hyd. CS F.O.

41⁄2 / 114.3 2 / 50.8 2213⁄16 / 57.9 45 / 20.0 2" (50.8) EUE

41⁄2 / 114.3 TO ORDER 277⁄16 / 69.7 45 / 20.0 23⁄8" (60.3) Hyd. CS 23⁄8" (60.3) Hyd. PH-6

* 006948 006950 013454 * 006924 001217 001147 000737 001153 000724 000735 000915 503122 503141

* 006912 006758 013455 * 006914 084265 001147 000751 006641 000738 000799 000922 503112 503142

* 006912 006758 013455 * 006914 084265 001147 000751 006641 000738 000799 000922 503112 503142

15

Part

Qty.

Sub Floating Insert Ball Seat W/Seal Ring Body Operating Stem Spring Grease Fitting Body O-Ring Operating Wrench Stem O-Ring Seat O-Ring Seal Ring Major Repair Kit Seal Kit

1 1 1 1 1 1 1 1 1† 1 1† 1† 1†

Tool Body, Max. O.D., In. / Mm. Min. I.D., In. / Mm. Approx. Total Length, In. / Cm. Approx. Weight, Lb. / Kg. Connection

Part

Qty.

Sub Floating Insert Ball Seat W/Seal Ring Body Operating Stem Spring Grease Fitting Body O-Ring Operating Wrench Stem O-Ring Seat O-Ring Seal Ring Major Repair Kit Seal Kit

1 1 1 1 1 1 1 1 1† 1 1† 1† 1†

411⁄16 / 119.0 21⁄8 / 54.0 2515⁄16 / 65.9 46 / 21.0 27⁄8" (73.0) O.D. API IF

47⁄8 / 123.8 27⁄16 / 61.9 215⁄8 / 54.9 46 / 21.0 21⁄2" (63.5) EUE

47⁄8 / 123.8 TO ORDER 241⁄4 / 61.6 51 / 23.0 27⁄8" (73.0) O.D. Hyd. PH-6

47⁄8 / 123.8 27⁄16 / 61.9 295⁄8 / 75.2 125 / 57.0 31⁄2" (88.9) Hughes X-Hole

* 006980 006799 013457 * 006983 001211 001147 000807 006641 000738 000801 000924 503137 503144

* 006980 006799 013457 * 006983 001211 001147 000807 006641 000738 000801 000924 503137 503144

* 006980 006799 013457 * 006983 001211 001147 000807 006641 000738 000801 000924 503137 503144

71⁄2 / 190.5 31⁄4 / 82.6 32 / 81.3 208 / 94.0 41⁄2" (114.3) X-Hole

71⁄2 / 190.5 31⁄4 / 82.6 32 / 81.3 208 / 94.0 41⁄2" (114.3) Hughes H-90

71⁄2 / 190.5 31⁄4 / 82.6 32 / 81.3 208 / 94.0 41⁄2" (114.3) API FH

* 007038 006841 013461 * 007041 001208 001147 000820 006651 000748 000812 000929 503140 503148

* 007038 006841 013461 * 007041 001208 001147 000820 006651 000748 000812 000929 503140 503148

* 007049 007051 015621 * 007041 001215 001147 000818 006651 000748 000811 000928 503140 503148

Part Numbers

5 / 127.0 2 / 50.8 305⁄16 / 77.0 125 / 57.0 31⁄2" (88.9) O.D. API IF (NOT F.O.)

5 / 127.0 27⁄16 / 61.9 301⁄2 / 77.5 130 / 59.0 31⁄2" (88.9) API FH

* 007022 007023 013458 * 007025 001209 001147 000752 006641 000738 000799 000922 503138 503145

* 006980 006799 013457 * 006983 001211 001147 000807 006641 000738 000801 000924 503137 503144

* 006925 006784 013456 * 006914 001210 001147 000752 006641 000738 000800 000923 503136 503143

63⁄8 / 161.9 7 / 117.8 211⁄16 / 68.3 3 / 76.2 331⁄2 / 85.1 313⁄4 / 80.6 170 / 77.0 187 / 86.0 31⁄2" (88.9) O.D. 31⁄2" (88.9) EUE API IF

71⁄2 / 190.5 31⁄4 / 82.6 32 / 81.3 208 / 94.0 41⁄2" (114.3) API IF

Part Numbers * 006905 006906 013459 * 006908 001212 001147 000762 006651 000796 000808 000926 503110 503146

* 007038 006841 013461 * 006840 001208 001147 000819 006651 000796 000812 000929 503139 503147

Popular sizes shown. Other sizes available from your TIW representative. †Parts comprising seal kit. *Contact the TIW engineering department for part numbers.

* 007038 006841 013461 * 007041 001208 001147 000820 006651 000748 000812 000929 503140 503148