JSA #40 -Non Intrinsically Safe

November 13, 2017 | Author: arunvrajan2008 | Category: N/A
Share Embed Donate


Short Description

Job safety Analysys...

Description

Job Safety Analysis Sheet JOB DESCRIPTION: Using Non – intrinsically Safe Equipment in Hazardous Location

JSA Ref. No. JSA / KOC / 40

Facility:

Permit No. Date:

Work Area / Equipment:

PERSONAL PROTECTIVE EQUIPMENT & TOOLS: Hard Hat, Safety Shoes, Coverall, Safety Goggles, Hand Gloves, Multi Gas Detector. SEQUENCE OF BASIC JOB STEPS

POTENTIAL HAZARDS

Yes / No

PRECAUTIONS



Ensure the worksite (where the non-intrinsically safe equipment to be used) is free from flammable / toxic vapor or liquid.



Do not refuel while equipment (such as Mobile Power Generator, Air Compressor etc) is running.



Keep the fire extinguishers & fire hoses in ready condition.

Non – compliance of KOC F & S Regulations and HSE MS Procedures



Refer HSEMS Procedures - Doc. No. SA.KOC.004 “Permit to Work” and Chapter -15 “Power & Hand Tool” of KOC F & S Regulations.

Unintended Shutdown of Facility / Equipment



Asses the risk & Identify the safety override (IR / UV Detector; Flammable / Toxic Gas Detectors) required for the work.

Collapse of Equipment / Appliance



Ensure the equipment is placed on a firm & properly leveled ground.

Unauthorized Work



Take a Hot Work Permit and other associated permits from Asset Owner.



Ensure the appliance / equipment (such as photography camera, portable power generator, air compressor etc) is free from defect.



Use properly insulated & suitably rated cables & extension wire for appliance / equipment.



Ensure the proper grounding for powered equipment.



Do not leave the equipment / appliance in unattended condition.



Switch off the equipment when not in use.



Do not touch the hot portion (such as engine exhaust pipe) of the equipment.



Use hand gloves



Do not stand near the engine exhaust



Use Ear Plug / Ear Muff if working in noisy area.



Switch off the appliance / equipment immediately in case of leak / spill / fire at the worksite.



Ensure proper wind up & housekeeping at worksite.



The accessories (tools, hoses, cables & sockets / terminals) not being used must be disconnected and stored separately.

Presence of Flammable / Toxic Vapor or Liquid

Fire & Explosion

Planning

Defective Tools / Appliance

Electric Shock

Work Execution Injury or Burn

Exposure to Harmful Smoke, Noise

Leak & Spill

Windup & Housekeeping

Scattered Material

Additional Hazards (Other than indicated above)

JSA Done By

Name: KOC / ID. No. Controlling Team: Signature:

Designation: Company: Contract No.(If Applicable): Date:

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF