JSA #21 -Facility Alarm

Job Safety Analysis Sheet JOB DESCRIPTION: Functional Testing of Facility Alarm (Beacon & Sounder)

JSA Ref. No. JSA / KOC / 21

Facility:

Permit No. Date:

Work Area / Equipment:

PERSONAL PROTECTIVE EQUIPMENT & TOOLS: Hard Hat, Safety Shoes, Hand Gloves, Coverall, Portable Radio SEQUENCE OF BASIC JOB STEPS

POTENTIAL HAZARDS

PRECAUTIONS



Refer HSEMS Procedure - Doc. No. SA.KOC.004 “Permit to Work”.



Take a Cold Work Permit from Asset Owner.



Ensure the spare items such as bulbs, fuse, resistance etc are available for replacement of defective items.



Refer manufacturer instruction for replacement of bulb or other items.

Unintended Panic in the Facility



Inform the workers in the facility prior to functional testing of alarm system.

Wrong Identity of Sounder & Beacon



Ensure the identity of Sounder & Beacon through Tag No.



Maintain a radio communication between worker at beacon / sounder location and the person stationed Control Room / Auxiliary Room.

Overlapping of Sound Alarm



Ensure the function of Sounder by visiting each location.

Noise



Use Ear Muff / Ear Plug against high tone noise.



Isolate power to Beacon & Sounder before opening it for servicing or maintenance.



Use rubber insulated gloves if required.



Refer manufacturer instruction for servicing or maintenance of Beacon & Sounders.



Confirm the alarm through radio communication; whether it is actual or fault whenever it is generated from Control Room.



In case the electrical junction box for Sounder & Beacon is opened for servicing or maintenance; ensure the closure of cable terminals as well as junction box conforms to respective hazardous area classification



Ensure proper wind up & housekeeping at worksite.



Inform the workers on completion of alarm functional testing.

Non – compliance of HSE MS Procedures

Non – availability of Spares Planning

Lack of Communication

Functional Testing

Yes / No

Electrical Shock

Fault / Actual Alarm

Spark Potential

Windup & Housekeeping

Scattered Material

Additional Hazards (Other than indicated above)

JSA Done By

Name: KOC / ID. No. Controlling Team: Signature:

Designation: Company: Contract No.(If Applicable): Date: