Jam's Plumbing Tools Reviewer

LONG IRON COMBINATION IRON

S - IRON

OFFSET IRON

SHORT IRON

ANGLE IRON BIRD’S BEAK PACKING IRON CAULKING IRON

LADDLE MELTING POT

CURVED CLAW HAMMER

TINNER HAMMER

HAND DRILLING MALLET

WOODEN MALLET

RUBBER MALLET

RIP CLAW HAMMER

ENGINEER’S HAMMER

MASON’S HAMMER

BALLPEEN HAMMER

CROSS PEEN

SHORT HANDLE SLEDGE HAMMER

LONG HANDLE SLEDGE HAMMER

HALF HATCHET

UNIVERSAL SIDE CUTTING PLIER W/ PIPE GRIP

LONG NOSE PLIER

LONG REACH PLIERS

LONG REACH DUCKBILL PLIERS

LINEMAN’S SIDE CUTTING PLIER

IAGONAL CUTTING PLIER

HEAVY DUTY SIDE CUTTING PLIERS

WATER PUMP PLIER

TONGUE AND GROOVE PLIER

END CUTTING PLIERS

DJUSTABLE SPUD WRENC It has a unserrated jaws, used to turn fittings of minimum strength, such as copper and brass valve and drain trap fitting of sinks and lavatories.

STRAIGHT PIPE WRENCH

RAPWRENCH A variatio of a pipe wrench; has a deeper and broader hook jaw housing which provides smooth, flat surface that may be used occasionally as a hammer.

OFFSET PIPE WRENCH Another variation of a pipe wrench featuring a jaw opening parallel to the handle and a narrower hook jaw which provide easy entry into tight spaces.

END PIPE WRENCH A tool fast and easy grip used on constricted spaces or close to a wall.

DJUSTABLE SPUD WRENC

ICE GRIP / LOCKING PLIE

MONKEY WRENCH A tool which resembles a pipe wrench, except for its smooth jaws. It is used to hold or turn a hardware having flat surfaces, such as nuts and drain fittings. An open end or adjustable wrench may be substituted for this purpose.

ADJUSTABLE WRENCH/ CRESCENT WRENCH

Any one of the several types of wrenches having one jaw fixed and the other adjustable; set to desired size or opening by means of a knurled.

SPUD WRENCH

STILLSON WRENCH A variation of pipe wrench with a swiveling serrated jaw and a knurled control knob located between the frame froming the head and the handle of the wrench.. By: Daniel C. ________.

TORQUE WRENCH A wrench used in No-Hub Soil pipe installation. Also used to ensure a tight and leak free joints.

UST WRENCH

(Undergo and Storage Tank) This is an innovative wrench specifically designed to allow quick, easy removal and installation of all steel riser piping on underground storage tank.

ALLEN WRENCH A wrench for screw with hexagonally shaped recess in its head.

CLOSET WRENCH A tool designed to fasten the closet seat to the closet bowl.

ASKET STRAINER WRENC A tool designed to fasten the closet seat to the closet bowl.

BASIN WRENCH

This wrench has a swiveling jaw that enable a plumber to reach into places not easily accessible with conventional wrenches.

INTERNAL WRENCH OR INTERNAL PIPE WRENCH A type of Wrench used to install or extract 1 through 2 inches nipples.

COMPOUND LEVERAGE PIPE WRENCH A unique type of pipe wrench in which the turning force applied. The principle of lever action in a simple machine had been applied in this type of patented plumbing tool.

PACKING NUT SOCKET WRENCHES Available in sets and fit nearly all tub, tub and shower valves. They are hexagonal on both ends and hollow core to fit over faucet stem handles.

STRAP WRENCH Used for any polished pipe particularly plastic or synthetic which are soft or may be damage by wrench serrated jaws.

HEX WRENCH A wrench with hexagonal jaw which is multislide. To provide grip on hexagonal nuts, square nuts, unions and valve paking nuts.

EAVY DUTY CHAIN WREN A type of wrench having a heavy duty sprocket chain.

CHAIN TONGS

POSED RATCHET THREAD

DROP HEAD RATCHET THREADER

GEARED THREADER

RATCHET BOLT THREADE

MONO-HEAD DIE

3 WAY PIPE DIE THREADE

CHAIN PIPE TONG

4 WHEEL PIPE CUTTER

IPE CUTTER WITH REAME

STRAIGHT PIPE WELDING VISE

ANGLE PIPE WELDING VISE

ELBOW PIPE WELDING VISE

FLANGED PIPE WELDING VISE

BENCH YOKE VISE Yoke and base are mde of strong, dependable iron. It has hardened alloy stell jaws and convenient pipe rest and bender.

PORTABLE KIT YOKE VISE

P SCREW POST CHAIN V

TOP SCREW BENCH CHAIN VISE

BOTTOM SCREW BENCH CHAIN VISE It has a crank handle on base, rugged cast iron base has jaws or hardened alloy with handy pipe

TOP SCREW STAND CHAIN VISE Is made of sturdy cast iron frame with alloy steel jaws. Equipped with pipe rest, pipe bender and

PORTABLE TRISTAND CHAIN VISE

A vise that has internal legs and tray that folds in for easy carrying and set-up.

QUICK OPENING PIPE CUTTER

SMALL DIAMTER CUTTER WITH REAMER

SMALL DIAMETER CUTTE

MIDGET TUBING CUTTER

SMALL INTERNAL PIPE OR TUBE CUTTER

HAMMER TYPE FLARING TOOL

YOKE AND SCREW FLARING TOOL

INSIDE REAMER

SPRING BENDER A tool used to bend flexible copper tubing without distortion.

GEARED RATCHET TYPE BENDER

A tool used to bend flexible copper tubing without distortion.

LEVER TYPE BENDER A tool used to bend flexible copper tubing without distortion.

PIPE BENDER

4 BLADE SAWTOOTH CUTTER For following up alter augers have been used and to open up floor drains.

GREASE CUTTER For blockages caused by hardened glazed material such as chemical deposits.

SPADE CUTTER For lines which have become badly greased with detergents and have to be opened.

GREASE “C” CUTTER For grease blockage in lines leading from garbage disposal unit or waste pipe.

SHARK TOOTH CUTTER For use in cleaning pipes of general material clinging to pipe walls.

SAW TOOTH CUTTER For clearing lines blocked heavily with roots. Unique design permits cutter to be removed from damaged pipe without locking.

SPIRAL BAR CUTTER For main sewers blocked by roots, leaf cebris, sticks, sawdust, cloth, sacking.

SPIRAL TOOTH CUTTER For clearing any stoppage, roots, rags, sticks etc.

XPANDING FINISH CUTTE For removal of material adhering to walls and certain roots of librous nature.

CHAIN KNOCKER

For use when vigorous action is required for cleaning of scale in pipes and boiler tubes.

FLUE BRUSH For use for finish cleaning required of boiler tube and heat exchangers.

DROP HEAD AUGER For cleaning back to back mounted fixtures, where cable needs to be led down the pipe.

FUNNEL AUGER

For use as second tool in line, breaks remains of stoppage left by straight auger.

STRAIGHT AUGER For use in exploring and breaking up stopagges or returning sample to surface to determin correct tool.

HOOK AUGER For heavy and dense root stoppages in pipes that require hooking or breaking up.

RETREIVING AUGER For searching of cable which is broken or lost in line.

BLOW TORCH

BOLT CUTTER

CHALK LINE

COLD CHISEL

CORPORATION STOP

CURB STOP WRENCH

DRAIN ROD

F-CLAMP

ENGINEER’S LEVEL

ENGINEER’S TRANSIT

FILE

FINISHING TROWEL

FRAMING SQUARE

G-CLAMP

GATE VALVE

HACK SAW A tool for cutting plastic and metal pipe. It use blade with 16 teeth per inch for sawing 1/8 to ¼ inch tubing and thin-walled pipe.

HAND RIVETER

HEAT FUSION MACHINE PPR PIPE

HOSE LEVEL

IMMERSION WRENCH

TROWEL

JAW DROPPER RIGID

LEVEL

MITER SQUARE

PHILIP SCREW

PIN WRENCH GRINDER

IPE CUTTER / PIPE SHEAR

PIPE DIE

PLUMB BOB

PLUMBER SNAKE DRUM MACHINE

PLUMBER’S SNAKE

PRESS GUN CRIMPING

PULL/PUSH RULE

RATCHET HAND DRILL

ROUND POINT SHOVEL

SINK PLUNGER

TOILET PLUNGER

SQUARE MOUTH SHOVEL

TINSMITH SNIP

TRY SQUARE

WOOD CHISEL

WOOD CROSS CUT SAW

ZIG ZAG RULE

PIPE EXTRACTORS Tool used to remove broken threaded ends of a pipe, plugs, fittings, etc.

BENDING IRON A tool used to straighten or expand flexible pipe, esp. Lead Pipe

BENDING PIN One of a number of pins in a set in a staggered arrangement in a block which are used in bending iron or lead pipe

VALVE SEAT TOOL This is used to remove square and octagonnaly-shaped threaded faucets. It has a right angle bar with one end for square nuts and the other octagonal.

CRIMPING TOOL A tool used to tighten the clamping ring on a PB insert fitting.