Iso 2768 English

ISO Tolerances DIN ISO 2768 - 1, DIN ISO 2768 - 2.

Ramo Material AB

Sayfa 1 / 3

Din leverantör av avancerade specialartiklar

Our main activity is based on supplying specialparts to high technology companies. Our business idea is to offer our customer a wide range of special products with low production costs and complete products, based on our knowledge of quality manufactures.

Mycket av vår verksamhet bygger på att leverera avancerade specialartiklar till högteknologiska företag. Vi arbetar med ett brett kontaktnät och till låga produktions-kostnader för att kunna erbjuda skräddarsydda och konkurrenskraftiga produkter. Klicka här för mer information om Ramo Material AB

Click here to visit our homepage for more information

Ramo Material AB - Tel: +46 370 37 87 00 - Fax: +46 370 37 87 29

According to DIN ISO 2768-1 General tolerances for linear measures and level squares with four tolerance classes are useful for simplifying drawings. By choosing the tolerance class precision levels common in workshops should be taken into account. If smaller tolerances are needed or bigger ones are more economical, then these tolerances are indicated next to the nominal size. Tabular 1 Limits for linear measures Limits in mm for nominal sizes in mm

Tolerance0,5 to 3

above 3 to 6

above 6 to 30

above 30 to 120

above 120 to 400

above 400 to 1000

above 1000 to 2000

f (fine)

± 0,05

± 0,05

± 0,1

± 0,15

± 0,2

± 0,3

± 0,5

-

m (medium)

± 0,1

± 0,1

± 0,2

± 0,3

± 0,5

± 0,8

± 1,2

±2

c (coarse)

± 0,15

± 0,2

± 0,5

± 0,8

± 1,2

±2

±3

±4

-

± 0,5

±1

± 1,5

± 2,5

±4

±6

±8

class

v (very coarce grob)

above 2000 to 4000

For nominal sizes below 0,5 mm the limit measures are to be indicated directly at the nominal measure. Tabular 2 Limit measures for radius of curvature and chamfer height Limits in mm for nominal sizes in mm

Tolerance class f (finne) m (medium) c (coarse) v (very coarse)

0,5

above 3

above 6

to 3

to 6

± 0,2

± 0,5

±1

± 0,4

±1

±2

Bei Nennmassen unter 0,5 mm sind die Grenzabmasse direkt am Nennmass anzugeben. Tabelle 3 Grenzabmasse für Winkelmasse Limits in mm for nominal sizes in mm

Tolerance class f (fine) m (medium) c (coarse )

to 10

above 10

above 50

above 50

to 50

to 120

to 400

±1°

± 30 '

± 20 '

± 10 '

±5'

± 1 ° 30 '

±1°

± 30 '

± 15 '

± 10 '

http://www.ramo.se/iso_2768_english.htm

above 400

28.12.2011

ISO Tolerances DIN ISO 2768 - 1, DIN ISO 2768 - 2.

v (very coarce)

±3°

±2°

Sayfa 2 / 3

±1°

± 30 '

± 20 '

For nominal sizes below 0,5 mm the limit measures are to be indicated directly at the nominal measure. If general tolerances according to ISO 2768-1 are valid, the following has to be inserted in the title box, i.e. for tolerance class medium ISO 2768 – m or general tolerance ISO 2768 – m For new designs only the general tolerance according to DIN ISO 2768-1 should be valid. The limit measurements of the tolerance classes m and f of DIN ISO 2768-1 are identic with those of DIN 7168-1.

General tolerances for form and position according to DIN ISO 2768-2 DIN ISO 2768-2 is for simplifying drawing and fixes general tolerances in three tolerance classes for form and position. By choosing a special tolerance class exactly the precision level common in workshops should be taken into account. If smaller tolerances are needed or bigger are more economical these tolerances should be mentioned directly according to ISO 1101. General tolerances for form and position should be used while the tolerance principle according. to ISO 8015 is valid and while this is mentioned in the drawing. This tolerance principles says that no opposite relation between measure, form and position tolerance exists (principle of superposition). General tolerances for straightness and evenness in mm Range of specified size in mm

Tolerance above 10

above 30

above 100

above 300

above 1000

to 10

to 30

to 100

to 300

to 1000

to 3000

H

0,02

0,05

0,1

0,2

0,3

0,4

K

0,05

0,1

0,2

0,4

0,6

0,8

L

0,1

0,2

0,4

0,8

1,2

1,6

class

General tolerances for straightness and evenness in mm Range of specified size in mm

Tolerance

above 100

above 300

above 1000

to 100

to 300

to 1000

to 3000

H

0,2

0,3

0,4

0,5

K

0,4

0,6

0,8

1

L

0,6

1

1,5

2

above 100

above 300

above 1000

to 300

to 1000

to 3000

0,8

1

1,5

2

class

General tolerances for symmetry Range of specified size in mm

Tolerance class

to 100 H

0,5

K

0,6

L

0,6

1

General tolerances for form and position are valid for form elements for which form and position tolerances are not indicated individually. They are applicable for all characteristics of the form elements accept cylinders, profiles of any line or surfaces, inclines, coaxiality, position and total movement. Ramo Material AB

-

Tel: +46 370 37 87 00

http://www.ramo.se/iso_2768_english.htm

-

Fax: +46 370 37 87 29

28.12.2011

ISO Tolerances DIN ISO 2768 - 1, DIN ISO 2768 - 2.

Sayfa 3 / 3

Ramo Material AB ansvarar ej för eventuella felaktigheter i ovanstående information. Ramo Material AB takes no responsibility in the eventuality of errors in the above information.

http://www.ramo.se/iso_2768_english.htm

28.12.2011