ISA-TR20.00.01-2007 Measurement and Control Instruments

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

TECHNICAL REPORT ISA-TR20.00.01-2007 Updated with 27 new specification forms in 2004-2006 Updated with 11 new specification forms in 2007

--`,,```,,,,````-`-`,,`,,`,`,,`---

Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

ISA–TR20.00.01–2007 Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations

Copyright ” 2011 by ISA. All rights reserved. Not for resale. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the prior written permission of the Publisher. ISA 67 Alexander Drive P. O. Box 12277 Research Triangle Park, North Carolina 27709 USA

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

ISBN: 978-1-93756-000-3

–3–

ISA–TR20.00.01–2007

Preface This preface, as well as all footnotes and annexes, is included for information purposes and is not part of ISA–TR20.00.01–2007. The standards referenced within this document may contain provisions that, through reference in this text, constitute requirements of this document. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this document are encouraged to investigate the possibility of applying the most recent editions of the standards indicated within this document. Members of IEC and ISO maintain registers of currently valid International Standards. ANSI maintain registers of currently valid U.S. National Standards. This document has been prepared as part of the service of ISA–The Instrumentation, Systems, and Automation Society, toward a goal of uniformity in the field of instrumentation. To be of real value, this document should not be static but should be subject to periodic review. Toward this end, the Society welcomes all comments and criticisms and asks that they be addressed to the Secretary, Standards and Practices Board; ISA; 67 Alexander Drive; P. O. Box 12277; Research Triangle Park, NC 27709; Telephone (919) 549-8411; Fax (919) 549-8288; E-mail: [email protected]. The ISA Standards and Practices Department is aware of the growing need for attention to the metric system of units in general, and the International System of Units (SI) in particular, in the preparation of instrumentation standards. The Department is further aware of the benefits to USA users of ISA standards of incorporating suitable references to the SI (and the metric system) in their business and professional dealings with other countries. Toward this end, this Department will endeavor to introduce SI-acceptable metric units in all new and revised standards, recommended practices, and technical reports to the greatest extent possible. Standard for Use of the International System of Units (SI): The Modern Metric System, published by the American Society for Testing & Materials as IEEE/ASTM SI 1097, and future revisions, will be the reference guide for definitions, symbols, abbreviations, and conversion factors. It is the policy of ISA to encourage and welcome the participation of all concerned individuals and interests in the development of ISA standards, recommended practices, and technical reports. Participation in the ISA standards-making process by an individual in no way constitutes endorsement by the employer of that individual, of ISA, or of any of the standards, recommended practices, and technical reports that ISA develops. CAUTION — ISA ADHERES TO THE POLICY OF THE AMERICAN NATIONAL STANDARDS INSTITUTE WITH REGARD TO PATENTS. IF ISA IS INFORMED OF AN EXISTING PATENT THAT IS REQUIRED FOR USE OF THE STANDARD, IT WILL REQUIRE THE OWNER OF THE PATENT TO EITHER GRANT A ROYALTY-FREE LICENSE FOR USE OF THE PATENT BY USERS COMPLYING WITH THE STANDARD OR A LICENSE ON REASONABLE TERMS AND CONDITIONS THAT ARE FREE FROM UNFAIR DISCRIMINATION. EVEN IF ISA IS UNAWARE OF ANY PATENT COVERING THIS STANDARD, THE USER IS CAUTIONED THAT IMPLEMENTATION OF THE STANDARD MAY REQUIRE USE OF TECHNIQUES, PROCESSES, OR MATERIALS COVERED BY PATENT RIGHTS. ISA TAKES NO POSITION ON THE EXISTENCE OR VALIDITY OF ANY PATENT RIGHTS THAT MAY BE INVOLVED IN IMPLEMENTING THE STANDARD. ISA IS NOT RESPONSIBLE FOR IDENTIFYING ALL PATENTS THAT MAY REQUIRE A LICENSE BEFORE IMPLEMENTATION OF THE STANDARD OR FOR INVESTIGATING THE VALIDITY OR SCOPE OF ANY PATENTS BROUGHT TO ITS ATTENTION. THE USER SHOULD CAREFULLY INVESTIGATE RELEVANT PATENTS BEFORE USING THE STANDARD FOR THE USER’S INTENDED APPLICATION. //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved.

ISA–TR20.00.01–2007

–4–

HOWEVER, ISA ASKS THAT ANYONE REVIEWING THIS STANDARD WHO IS AWARE OF ANY PATENTS THAT MAY IMPACT IMPLEMENTATION OF THE STANDARD NOTIFY THE ISA STANDARDS AND PRACTICES DEPARTMENT OF THE PATENT AND ITS OWNER. ADDITIONALLY, THE USE OF THIS STANDARD MAY INVOLVE HAZARDOUS MATERIALS, OPERATIONS OR EQUIPMENT. THE STANDARD CANNOT ANTICIPATE ALL POSSIBLE APPLICATIONS OR ADDRESS ALL POSSIBLE SAFETY ISSUES ASSOCIATED WITH USE IN HAZARDOUS CONDITIONS. THE USER OF THIS STANDARD MUST EXERCISE SOUND PROFESSIONAL JUDGMENT CONCERNING ITS USE AND APPLICABILITY UNDER THE USER’S PARTICULAR CIRCUMSTANCES. THE USER MUST ALSO CONSIDER THE APPLICABILITY OF ANY GOVERNMENTAL REGULATORY LIMITATIONS AND ESTABLISHED SAFETY AND HEALTH PRACTICES BEFORE IMPLEMENTING THIS STANDARD. The following people served as members of ISA Committee SP20: NAME

COMPANY

G. Barta, Chairman W. Albe S. Alvarez T. Baldwin N. Battikha E. Berger J. Carew T. Caston B. Cleary K. Cole E. Crawford T. D. Daniel A. Engels G. Erk F. Ford G. Gifford R. Gulley R. Hartman C. Hill H. Hinssen W. Ingham A. Iverson D. Kelly H. Koning M. Kulkarni T. McAvinew A. McCauley J. McQuighan J. Meppen D. Osborn C. Phillips G. Ramachandran G. Richardson J. Rourke P. Rowland G. Sanders M. Scott J. Sen R. Shah

Bechtel Corp. Dow Corning Corp. Compania Inspeccion Mexicana Brown & Root, Inc. Bergo Tech, Inc. Mitre Corp. Consultant Eastman Chemicals Co. Rosemount, Inc. Burns & Roe Enterprises Nova Control Systems, Inc. Consultant Praxair, Inc. Consultant Bayer Corp. Flowserve Vara International Fisher-Rosemount Systems, Inc. Brown & Root, Inc. Exxon Chemical Engineering Stantec Consulting Ltd. Ivy Optiks VECO Rocky Mountain, Inc. DSM Services General Instruments Consortium Merrick & Co. Chagrin Valley Controls, Inc. Constellation Energy Y. Meppen Consultants Greeley & Hansen Technip USA Corp. Cytec Industries, Inc. Thermco Instrument Corp. Jacobs Engineering Group SOIGNE Associates, Inc. Penberthy, Inc. Process Measurement Tech. Ltd. Bechtel Corp. Consultant

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved.

–5–

J. Soos M. Spencer J. Summerfield R. Sundar L. Takeyasu D. Taylor R. Town I. Verhappen E. Welch B. Williams

ISA–TR20.00.01–2007

Huntsman Corp. Desktop Engineering Ltd. Consultant Foster Wheeler USA Corp. Kenonic Controls, Inc. Spartan Controls Jefferson Services Co, Inc. Syncrude Canada Ltd. Duke/Fluor Daniel, Inc. Merck & Co. Inc.

NAME

COMPANY

M. Zielinski D. Bishop M. Cohen M. Coppler B. Dumortier W. Holland E. Icayan A. Iverson R. Jones V. Maggioli T. McAvinew A. McCauley, Jr. G. McFarland D. Rapley R. Reimer J. Rennie H. Sasajima I. Verhappen R. Webb W. Weidman J. Weiss M. Widmeyer R. Wiegle C. Williams G. Wood

Fisher-Rosemount Systems, Inc. Consultant Consultant Ametek, Inc. Schneider Electric Southern Company Advanced Control & Engineering Solutions Ivy Optiks Dow Chemical Co. Feltronics Corp. Merrick & Co. Chagrin Valley Controls, Inc. Westinghouse Process Control Inc. Rapley Consulting Inc. Rockwell Automation Factory Mutual Research Corp. Yamatake Corp. Syncrude Canada Ltd. Power Engineers Parsons Energy & Chemicals Group EPRI EG&G Defense Materials CANUS Corp. Eastman Kodak Co. Graeme Wood Consulting

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved.

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

This technical report was approved for publication by the ISA Standards and Practices Board on 04 April 2001.

This page intentionally left blank.

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

–7–

ISA–TR20.00.01–2007

Contents Preface .......................................................................................................................................................... 3 Foreword ....................................................................................................................................................... 9 Introduction ................................................................................................................................................. 11 1

Scope ................................................................................................................................................... 13

2

Normative references........................................................................................................................... 13

3

Definitions ............................................................................................................................................ 13

4

Application ........................................................................................................................................... 13

6

7

Operating parameters documentation .......................................................................................... 13

4.2

Preliminary inquiry/quotation ........................................................................................................ 13

4.3

Traditional specification ................................................................................................................ 13

4.4

Conforming specification .............................................................................................................. 13

Requirements....................................................................................................................................... 14 5.1

Three form parts ........................................................................................................................... 14

5.2

Form numbers and titles for Operating Parameters forms ........................................................... 14

5.3

Form numbers and titles for Device Specification forms .............................................................. 14

5.4

Form numbers and titles for General or Special Requirements forms ......................................... 14

General sections of ISA specification forms ........................................................................................ 14 6.1

Specification identification section................................................................................................ 14

6.2

Endorsements............................................................................................................................... 14

6.3

Revision chronicle......................................................................................................................... 14

6.4

Component identification .............................................................................................................. 15

Classification and designation ............................................................................................................. 15

Annex A (informative) – Specification forms tables of contents.................................................................. 17 Annex B (informative) – Approved specification forms ............................................................................... 23 Annex C (informative) – Specification forms pick list and contextual help references .............................. 117

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved.

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

5

4.1

This page intentionally left blank.

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\ --`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

–9–

ISA–TR20.00.01–2007

Foreword This technical report has been prepared by ISA’s SP20 standards committee, Instrument Specification Forms. The ISA-SP20 committee welcomes comments and suggestions, and requests that they be addressed to the Chairperson, ISA-SP20, ISA, 67 Alexander Drive, Research Triangle Park, NC 27709 USA. This technical report provides separate form parts for operating parameters, device specifications, and general requirements. Forms from ISA-20-1981 have been modified extensively, and many of the forms represent new devices not previously covered. This technical report applies to all processes of development and use of ISA specification forms for process measurement and control instruments. It provides the listing of the forms, the classification of the devices, and the approved forms.

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved. //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

This page intentionally left blank.

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

– 11 –

ISA–TR20.00.01–2007

Introduction The completion of instrument specification forms is an extremely important segment of the complete design, purchase, and manufacture of process measurement and control instrumentation. Approved ISA specification forms for many devices are developed that follow the guidelines of ISA–20.00.03–2001 and have been reviewed by users and manufacturers. These forms are adequate for most applications and can be provided by ISA. The defining of specification forms and a data dictionary will allow electronic data exchange between users and manufacturers. The purposes of ISA specification forms are --`,,```,,,,````-`-`,,`,,`,`,,`---

a) to assist in preparation of a complete specification by listing and providing space for all principal descriptive attributes; b) to facilitate quoting, bid reviews, purchasing, receiving, calibration, inspection, piping design, design audit, accounting, and ordering procedures by uniform display of information; c) to improve efficiency of instrumentation activities from initial concept to final commissioning and any subsequent reviews and revisions; and d) to provide standard data definitions and field lengths adequate for electronic exchange of information.

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved.

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\ --`,,```,,,,````-`-`,,`,,`,`,,`---

This page intentionally left blank.

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

– 13 –

1

ISA–TR20.00.01–2007

Scope

Instrument devices with dedicated functionality may be specified using data-sheet-type, approved ISA specification forms. This technical report does not address system specifications such as shared control and shared display devices, where extensive use of functionality or performance specifications is required. This technical report lists the ISA specification forms by form part category, measured or initiating variable, readout, or final control device categories, and form number. A form numbering system has been implemented that identifies the form categories, device function grouping, and page number. The form number, title, and development status is listed for each proposed or approved form.

2

Normative references

ISA–20.00.03–2001, Specification Forms for Process Measurement and Control Instruments, Part 3: Form Requirements and Development Guidelines.

3

Definitions

For the purpose of this technical report, the following definition applies:

--`,,```,,,,````-`-`,,`,,`,`,,`---

3.1 specification form: the document, or its electronic data equivalent, that details the statement of parameters or properties prescribing the design basis, construction, materials, and performance for an instrument to be supplied.

4

Application

ISA specification forms may be used for the following different levels of device specification. 4.1

Operating parameters documentation

Documentation of the operating parameters may be completed and endorsed independently of the hardware device selection and preliminary specification through the use of the separate form page. 4.2

Preliminary inquiry/quotation

For a preliminary inquiry or quotation, the specifier and vendor may agree on a minimum level of information. In this case, the specifier may mark with an asterisk (*) in the revision column of the Operating Parameters or Device Specification forms, any lines that the recipient of the specification form is requested to complete. 4.3

Traditional specification

Documentation of operating parameters required for sizing or selection analysis, and identification of the instrument properties that are pertinent to the development of a manufacturer’s model number, should be the minimum data provided on specification forms used to purchase instruments. //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

4.4

Conforming specification

A complete specification ideally should include all relevant information about the main device and associated secondary devices that has been agreed to by the purchaser and supplier. In this case, the fully completed specification form can be used for the final documentation of the instrument specifications.

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved.

ISA–TR20.00.01–2007

5 5.1

– 14 –

Requirements Three form parts

ISA specification forms are generally comprised of three form parts for the following information organization: a) Operating Parameters forms are developed to document the process application and design conditions for communication to instrument specifiers and manufacturers. b) Device Specification forms are developed to provide the information to initially size and select a main device and the information to identify requirements for attached and directly associated devices.

5.2

Form numbers and titles for Operating Parameters forms

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

A common form is developed for all devices sharing the same measured variable or final control element. Table A.1, annex A, identifies assigned categories, ISA form numbers, and titles. 5.3

Form numbers and titles for Device Specification forms

Device Specification forms are grouped and numbered based upon a device category code, the form part number, and an instrument function subcategory sequential number. Table A.2, annex A, identifies assigned device categories, ISA form numbers, and titles. 5.4

Form numbers and titles for General or Special Requirements forms

A single form is provided for the initial page of the General or Special Requirements forms. Table A.3, annex A, identifies the assigned ISA form number and title.

6 6.1

General sections of ISA specification forms Specification identification section

Operating Parameters, Device Specification, and General or Special Requirements forms utilize the same specification identification field prompts. 6.2

Endorsements

Endorsement identifications and status inference, such as originator, checker, approver, and origin date, should be independent throughout each form type. 6.3

Revision chronicle

Identification of the three most recent entries recorded in the revision chronicle should be independent throughout each form type.

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved.

--`,,```,,,,````-`-`,,`,,`,`,,`---

c) General or Special Requirements forms are developed to provide means for the specifier to identify general or special requirements that are applicable to the device, but need additional space beyond that available in the other two types of forms.

– 15 –

6.4

ISA–TR20.00.01–2007

Component identification

Identification of the instrument, such as primary tag number, description, line/equipment number, and reference drawing number, should be identical throughout each form type.

7

Classification and designation

Hardware specification forms are based on specific hardware types as classified in annex A.

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved. //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

This page intentionally left blank.

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

– 17 –

ISA–TR20.00.01–2007

Annex A (informative) – Specification forms tables of contents Table A.1 – Operating parameter device categories and form titles Form Title

Development Status, ISA-SP20

20A1001

Analysis Device

Approved (Annex B)

20A1002

Analysis Device Composition or Property

Approved (Annex B)

20B1001

Burner or Combustion Device

20C1001

Valve or Regulator Device

Approved (Annex B)

20F1001

Flow Device

Approved (Annex B)

20H1001

Hand Control Device

20L1001

Level Device

Approved (Annex B)

20P1001

Differential Pressure Device

Approved (Annex B)

20P1002

Pressure Safety Device

Approved (Annex B)

20P1003

Pressure Device Rev. 0

Approved (Annex B)

20R1001

Receiver Device

20T1001

Temperature Device

20U1001

Basic Engineering Design Data

20V1001

Vibration or Mechanical Analysis Device

20W1001

Weight or Force Device

20X1001

Unclassified Device

20Y1001

Relay or Compute or Converter Device

20Z1001

Position Device

Approved (Annex B)

Approved (Annex B)

Table A.2 – Device specification categories and form titles Form Number

Form Title Analysis Devices

20A2101

Carbon Dioxide Monitor

20A2111

Combustible Gas Analyzer

20A2121

Flue & Stack Gas Analyzer

20A2141

Chromatograph Analyzer

20A2142

Chromatograph Analyzer Components

20A2151

In Situ Oxygen Analyzer

20A2161

Extractive Oxygen Analyzer

20A2162

Extractive Oxygen Analyzer Components

--`,,```,,,,````-`-`,

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved.

Development Status, ISA-SP20

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

Form Number

ISA–TR20.00.01–2007

– 18 –

Table A.2 – Device specification categories and form titles (cont'd) Analysis Devices (cont'd) 20A2171

Opacity Analyzer

20A2181

Toxic Gas Analyzer

20A2391

Entrained Holdup Gas Monitor

20A2191

Dissolved Oxygen Analyzer

20A2192

Dissolved Oxygen/Ozone/CL2 Transmitter/Analyzer/Monitor

20A2201

Infrared or Ultraviolet Analyzer

20A2202

Infrared or Ultraviolet Analyzer Components

20A2301

Ion-Selective Analyzer

20A2311

Liquid Density or Specific Gravity Transmitter

20A2321

Nuclear-Type Density Transmitter

20A2331

Oil-In-Water Detector

20A2341

pH/ORP Sensor w/wo Insertion Assembly

Approved (Annex B)

20A2342

pH/ORP/Conductivity/Resistivity Transmitter/Analyzer/Monitor

Approved (Annex B)

20A2351

Turbidity or Suspended Solids Sensor w/wo Integral Transmitter

Approved (Annex B)

20A2352

Turbidity or Suspended Solids Transmitter or Controller

Approved (Annex B)

20A2361

Viscometer

20A2371

Moisture Analyzer

20A2372

Moisture Analyzer Components

20A2373

Humidity/Dewpoint Transmitter w/wo Switches

Approved (Annex B)

20A2381

Conductivity Sensor w/wo Insertion Assembly

Approved (Annex B)

20A2901

Sample Conditioning System w/wo Switches and Valves

Approved (Annex B)

Approved (Annex B)

Burner or Combustion Devices 20B2001

Flame Detector

20B2101

Flame Monitor Valve or Regulator Devices

20C2001

Linear Motion Type Control Valve Assembly

Approved (Annex B)

20C2002

Linear Motion Type Control Valve Auxiliaries

Approved (Annex B)

20C2011

Rotary Motion Type Control Valve Assembly

Approved (Annex B)

20C2012

Rotary Motion Type Control Valve Auxiliaries

Approved (Annex B)

20C2021

Severe Service Control Valve Assembly

20C2022

Severe Service Control Valve Auxiliaries

20C2031

Desuperheater Control Valve

20C2041

Linear Motion Type Motor-Operated Valve Assembly

Approved (Annex B)

20C2042

Rotary Motion Type Motor Operated Valve Assembly

Approved (Annex B)

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved. //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

– 19 –

ISA–TR20.00.01–2007

Table A.2 – Device specification categories and form titles (cont'd) Valve or Regulator Devices (cont’d) 20C2043

Electric Actuator and Auxiliaries

20C2101

Recirculation Control Valve

20C2111

Pressure Regulator with/without Pilot Valve

20C2131

Temperature Regulator Valve

20C2141

Air-Release or Air/Vacuum and Combination Air Valves

20C2201

Power-Actuated Block Valve Assembly

20C2202

Power-Actuated Block Valve Auxiliaries

20C2211

Solenoid Valve

20C2221

Manual-Actuated Block Valve Assembly

Approved (Annex B)

Approved (Annex B)

Approved (Annex B)

Flow Devices 20F2001

Anemometer Element

20F2011

Elbow Meter

Approved (Annex B)

20F2021

Flow Nozzle w/wo Meter Tube

Approved (Annex B)

20F2031

Orifice Plate

Approved (Annex B)

20F2041

Orifice Plate Assembly w/wo Meter Tube

Approved (Annex B)

20F2051

Multivariable Flow Transmitter

Approved (Annex B)

20F2061

Paddle Flow Switch or Flowmeter

Approved (Annex B)

20F2071

Pitot Tube w/wo Insertion Assembly

Approved (Annex B)

20F2081

Segmental Wedge Flow Element

Approved (Annex B)

20F2091

Target Flowmeter

20F2101

V-Shaped Cone Flow Element

Approved (Annex B)

20F2111

Venturi or Flow Tube w/wo Meter Tube

Approved (Annex B)

20F2211

Flume Flowmeter

20F2221

Open Channel Flowmeter

20F2231

Rotameter Flowmeter

20F2241

Rotameter Transmitter

20F2251

Variable Area Flowmeter

20F2261

Weir Flowmeter

20F2321

Magnetic Flowmeter w/wo Integral Totalizer Indicator

20F2331

Nuclear Type Flowmeter

20F2341

Ultrasonic Flowmeter w/wo Switches

Approved (Annex B)

20F2351

Thermal Mass Flowmeter w/wo Switches

Approved (Annex B)

20F2361

Thermal Mass Flow Switch

Approved (Annex B)

Copyright 2011 ISA.NotAllforrights Resale reserved.

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Approved (Annex B)

ISA–TR20.00.01–2007

– 20 –

Table A.2 – Device specification categories and form titles (cont'd) Flow Devices (cont’d) 20F2371

Turbine Flowmeter w/wo Totalizer Indicator

20F2381

Vortex or Swirl Flowmeter w/wo Totalizer Indicator

Approved (Annex B)

20F2391

Sonic Flowmeter

Approved (Annex B)

20F2411

Positive Displacement Flowmeter Direct-Reading Type

Approved (Annex B)

20F2421

Positive Displacement Flowmeter w/ Transmitter or Accessories

Approved (Annex B)

20F2431

Variable Area Flow Switch

20F2511

Mass Type Flowmeter

20F2521

Coriolis Mass Flowmeter w/wo Totalizer Indicator

Approved (Annex B)

20F2611

Sight Flow Indicator w/wo Illuminator

Approved (Annex B)

Hand Control Devices

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

20H2001

Instrument Valve

20H2011

Instrument Manifold Valve Level Devices

20L2101

Capacitance or RF Admittance Level Transmitter w/wo Switches

Approved (Annex B)

20L2111

Differential Pressure Level Transmitter - Flange Mounted

Approved (Annex B)

20L2121

Displacer-Type Level Transmitter or Local Controller

Approved (Annex B)

20L2131

Tape Level Gauge or Transmitter w/wo Switches

20L2141

Nuclear Radiation Level Transmitter w/wo Switches

Approved (Annex B)

20L2151

Resistance-Tape Level Transmitter w/wo Switches

Approved (Annex B)

20L2161

Radar Level Transmitter w/wo Switches

20L2171

Non-contact Ultrasonic Level Transmitter w/wo Switches

20L2181

Magnetostrictive Level Transmitter w/wo Switches

20L2301

Capacitance or RF Admittance Level Switch

Approved (Annex B)

20L2311

Float or Displacer Level Switch

Approved (Annex B)

20L2312

Tank Level Gauge or Indicator w/wo Switches

Approved (Annex B)

20L2321

Nuclear Radiation Level Switch

Approved (Annex B)

20L2331

Resistance Tape Level Switch

20L2341

RF or Radar or Micro Level Switch

20L2351

Ultrasonic Contact-Type Level Switch

20L2361

Vibrating Element Level Switch

20L2371

Rotary Level Switch

Approved (Annex B)

20L2501

Liquid Level Gage Glass w/wo Illuminator

Approved (Annex B)

20L2511

Magnetic Liquid Level Gage or Indicator w/wo Switches

Approved (Annex B)

20L2521

Tape Float Tank Gauge

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved.

Approved (Annex B)

Approved (Annex B)

– 21 –

ISA–TR20.00.01–2007

Table A.2 – Device specification categories and form titles (cont'd) Pressure or Differential Pressure Devices 20P2001

Pressure Gauge

Approved (Annex B)

20P2011

Pressure Gauge With Diaphragm Seal

Approved (Annex B)

20P2101

Differential Pressure Gauge

Approved (Annex B)

20P2201

Pressure Transmitter

Approved (Annex B)

20P2211

Pressure Transmitter With Diaphragm Seal

Approved (Annex B)

20P2301

Differential Pressure Transmitter

Approved (Annex B)

20P2311

Differential Pressure Transmitter With Diaphragm Seals

Approved (Annex B)

20P2401

Pressure Switch w/wo Transmitter

Approved (Annex B)

20P2501

Differential Pressure Switch w/wo Transmitter

Approved (Annex B)

Pressure Safety Devices 20P2901

Rupture Disk Assembly w/wo Burst Sensor

20P2911

Pressure Relief Tank Vent

20P2921

Pressure Relief Valve

Approved (Annex B)

Approved (Annex B) Receiver Devices

20R2011

Annunciator

20R2111

Controller

20R2121

Local Controller w/wo Recorder

20R2201

Receiver Gauge

20R2211

Indicator

20R2221

Local Indicator w/wo Recorder

20R2231

Totalizer Indicator

20R2241

Digital Meter

20R2311

Analog Recorder

20R2411

Digital Recorder

--`,,```,,,,````-`-`,,`,,`,`,,`---

Approved (Annex B)

Temperature Devices 20T2001

Bimetallic Thermometer w/wo Thermowell

Approved (Annex B)

20T2101

Filled-System Thermometer Assembly w/wo Thermowell

Approved (Annex B)

20T2111

Filled-System Temperature Switch w/wo Thermowell

Approved (Annex B)

20T2121

Filled-System Temperature Transmitter w/wo Thermowell

Approved (Annex B)

20T2201

RTD Assembly w/wo Thermowell

Approved (Annex B)

20T2221

RTD/Thermocouple Temperature Transmitter or Switch

Approved (Annex B)

20T2301

Thermocouple Assembly w/wo Thermowell

Approved (Annex B)

20T2401

Thermal Radiation Temperature Sensor w/wo Monitor

Approved (Annex B)

20T2501

Thermowell or Protecting Tube Assembly

Approved (Annex B)

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved. //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

ISA–TR20.00.01–2007

– 22 –

Table A.2 – Device specification categories and form titles (cont'd) Vibration or Mechanical Analysis Devices Vibration Switch

20V2211

Vibration Monitor

20V2311

Mechanical Analysis Monitor Weight Devices

20W2011

Electronic Weight Scale

20W2111

Strain Gage Weight Indicator

20W2211

Load Cell or Transducer

Approved (Annex B)

20W2221

Electronic Weight Transmitter, Indicator, or Controller

Approved (Annex B)

Relay or Compute or Converter Devices 20Y2011

Transducer

20Y2111

Barrier or Isolator

20Y2211

Signal Converter

20Y2311

Analog Signal Switch

20Y2411

Solenoid or Pilot Valve

20Y2511 & 20Y2512

Fieldbus Junction & Continuation of Tag Number List

Approved (Annex B)

Position Devices 20Z2011

Electromechanical Limit Switch

Approved (Annex B)

20Z2012

Proximity Sensor

Approved (Annex B)

20Z2021

Proximity Switch

20Z2111

Position Transmitter

Table A.3- General or special requirements form title Form Number 20G3001

Form Title General or Special Requirements

Development Status, ISA-SP20 Approved (Annex B)

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

20V2111

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved.

– 23 –

ISA–TR20.00.01–2007

Annex B (informative) – Approved specification forms

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

Following are the approved specification forms, as of the date of this publication.

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Copyright 2011 ISA.NotAllforrights Resale reserved.

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 133 134 135 136 Rev

RESPONSIBLE ORGANIZATION

ANALYSIS DEVICE

6 7 8 9 10

Operating Parameters

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

ADMINISTRATIVE IDENTIFICATIONS Project number Sub project no Project Enterprise Site Area Cell Unit

40 SERVICE IDENTIFICATIONS Continued 41 Return conn matl type 42 Inline hazardous area cl Div/Zon Group 43 Inline area min ign temp Temp ident number 44 Remote hazardous area cl Div/Zon Group 45 Remote area min ign temp Temp ident number 46 SERVICE IDENTIFICATIONS 47 Tag no/Functional ident 48 COMPONENT DESIGN CRITERIA Related equipment 49 Component type Service 50 Component style 51 Output signal type P&ID/Reference dwg 52 Characteristic curve Process line/nozzle no 53 Compensation style Process conn pipe spec 54 Type of protection Process conn nominal size Rating 55 Criticality code Process conn termn type Style 56 Max EMI susceptibility Ref Process conn schedule no Wall thickness 57 Max temperature effect Ref Process connection length 58 Max sample time lag Process line matl type 59 Max response time Fast loop line number 60 Min required accuracy Ref Fast loop pipe spec 61 Avail nom power supply Number wires Fast loop conn nom size Rating 62 Calibration method Fast loop conn termn type Style 63 Testing/Listing agency Fast loop schedule no Wall thickness 64 Test requirements Fast loop estimated lg 65 Supply loss failure mode Fast loop material type 66 Signal loss failure mode Return conn nominal size Rating 67 Return conn termn type Style 68 PROCESS VARIABLES MATERIAL FLOW CONDITIONS 101 PROCESS DESIGN CONDITIONS Flow Case Identification Units 102 Minimum Maximum Units Process pressure 103 Process temperature 104 Process phase type 105 Process liquid actl flow 106 Process vapor actl flow 107 Process vapor std flow 108 Process liquid density 109 Process vapor density 110 Process liquid viscosity 111 Sample return pressure 112 Sample vent/drain press 113 Sample temperature 114 Sample phase type 115 Fast loop liq actl flow 116 Fast loop vapor actl flow 117 Fast loop vapor std flow 118 Fast loop vapor density 119 Conductivity/Resistivity 120 pH/ORP 121 RH/Dewpoint 122 Turbidity/Opacity 123 Dissolved oxygen 124 Corrosivity 125 Particle size 126 127 CALCULATED VARIABLES 128 Sample lag time 129 Process fluid velocity 130 Wake/natural freq ratio 131 132 MATERIAL PROPERTIES 137 MATERIAL PROPERTIES Continued Name 138 NFPA health hazard Flammability Reactivity Density at ref temp At 139 140 Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20A1001 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

--`,,```,,,,````-`-`,,`,,`,`,,`---

Not for Resale

© 2004 ISA

RESPONSIBLE ORGANIZATION

ANALYSIS DEVICE COMPOSITION OR PROPERTY Operating Parameters (Continued)

Units

Minimum

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status MEASUREMENT DESIGN CONDITIONS Units Maximum Units Repeatability

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

PROCESS COMPOSITION OR PROPERTY Component/Property Name Normal

6 7 8 9 10

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 Rev

Date

Revision Description

By

Appv1 Appv2 Appv3

Form: 20A1002 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

REMARKS

© 2004 ISA

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

VALVE OR REGULATOR DEVICE Operating Parameters

ADMINISTRATIVE IDENTIFICATIONS Project number Sub project no Project Enterprise Site Area Cell Unit

40 41 42 43 44 45 46 SERVICE IDENTIFICATIONS 47 Tag no/Functional ident 48 Related equipment 49 Service 50 51 P&ID/Reference dwg number 52 Upstr line/nozzle number 53 Upstream line pipe spec 54 Upstr line nominal size Rating 55 Upstr line conn type Style 56 Upstr line schedule no Wall thickness 57 Upstr conn orientation 58 Upstr line material type 59 Connection design code 60 Dnstr line/nozzle number 61 Downstream line pipe spec 62 Dnstr line nominal size Rating 63 Dnstr line conn type Style 64 Dnstr line schedule no Wall thickness 65 Dnstr conn orientation 66 Dnstr line material type 67 Dnstr insulation atten 68 PROCESS VARIABLES MATERIAL FLOW CONDITIONS Flow Case Identification Units Inlet pressure Outlet pressure Inlet temperature Inlet phase type Mass fraction vapor Total mass flow rate Liquid mass flow rate Liquid actual flow rate Liquid standard flow rate Liquid density Liquid specific gravity Liquid viscosity Absolute vapor pressure Vapor mass flow rate Vapor actual flow rate Vapor standard flow rate Vapor density Vapor specific gravity Vapor molecular weight Vapor viscosity Inlet compressibility CALCULATED VARIABLES Pressure differential Total system press drop Calculated flow coef Calculated travel Calculated travel time Calculated SPL MATERIAL PROPERTIES Name Composition Density at ref temp At Ratio sp heat capacity Date Revision Description By Appv1 Appv2

138 139 140 141 142 Appv3

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

SERVICE IDENTIFICATIONS Continued Inline hazardous area cl Div/Zone Group Inline area min ign temp Temp ident number Remote hazardous area cl Div/Zone Group Remote area min ign temp Temp ident number

COMPONENT DESIGN CRITERIA Component type Component style Input signal type Flow characteristic Min seat leakage class Max stem leakage rate Type of protection Criticality code Max EMI susceptibility Ref Min xdcr reqd accuracy Ref Max offset/propn band Actuator sizing factor Avail nom power supply Number wires Available nom air supply Testing/Listing agency Test requirements Supply loss failure mode Signal loss failure mode

101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132

PROCESS DESIGN CONDITIONS Minimum Maximum Units

MATERIAL PROPERTIES Continued Abs critical pressure Critical temperature NFPA health hazard Flammability Reactivity REMARKS

© 2001 ISA

Form: 20C1001 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 133 134 135 136 137 Rev

RESPONSIBLE ORGANIZATION

FLOW DEVICE

6 7 8 9 10

Operating Parameters

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

ADMINISTRATIVE IDENTIFICATIONS Project number Sub project no Project Enterprise Site Area Cell Unit

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 132 133 134 135 136 137 Rev

40 SERVICE IDENTIFICATIONS Continued 41 Inline hazardous area cl Div/Zone Group 42 Inline area min ign temp Temp ident number 43 Remote hazardous area cl Div/Zone Group 44 Remote area min ign temp Temp ident number 45 46 SERVICE IDENTIFICATIONS 47 COMPONENT DESIGN CRITERIA Tag no/Functional ident 48 Component type Related equipment 49 Component style Service 50 Output signal type 51 Characteristic curve P&ID/Reference dwg number 52 Compensation style Upstr line/nozzle number 53 Type of protection Upstream line pipe spec 54 Criticality code Upstr line nominal size Rating 55 Max EMI susceptibility Ref Upstr line conn type Style 56 Max temperature effect Ref Upstr line schedule no Wall thickness 57 Min diameter ratio (d/D) Max Upstr conn orientation 58 Max response time Upstr line material type 59 Min required accuracy Ref Connection design code 60 Avail nom power supply Number wires Dnstr line/nozzle number 61 Min load capability Downstream line pipe spec 62 Testing/Listing agency Dnstr line nominal size Rating 63 Test requirements Dnstr line conn type Style 64 Supply loss failure mode Dnstr line schedule no Wall thickness 65 Signal loss failure mode Dnstr conn orientation 66 Dnstr line material type 67 Avail upstr straight lg Dnstr lg 68 PROCESS VARIABLES MATERIAL FLOW CONDITIONS 101 PROCESS DESIGN CONDITIONS Flow Case Identification Units 102 Minimum Maximum Units Inlet pressure 103 Outlet pressure 104 Inlet temperature 105 Inlet phase type 106 Mass fraction vapor 107 Total mass flow rate 108 Liquid mass flow rate 109 Liquid actual flow rate 110 Liquid standard flow rate 111 Liquid density 112 Liquid specific gravity 113 Liquid viscosity 114 Absolute vapor pressure 115 Vapor mass flow rate 116 Vapor actual flow rate 117 Vapor standard flow rate 118 Vapor density 119 Vapor specific gravity 120 Vapor molecular weight 121 Vapor viscosity 122 Inlet compressibility 123 124 CALCULATED VARIABLES 125 Pressure differential 126 Perm pressure drop 127 Line fluid velocity 128 Line Reynolds number 129 Calculated uncertainty 130 131 MATERIAL PROPERTIES 138 MATERIAL PROPERTIES Continued Name 139 Abs critical pressure Composition 140 Critical temperature Density at ref temp At 141 NFPA health hazard Flammability Reactivity Ratio sp heat capacity 142 Conductivity 143 Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20F1001 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

© 2001 ISA Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14

LEVEL DEVICE

6 7 8 9 10

Operating Parameters

ADMINISTRATIVE IDENTIFICATIONS Project number Sub project no Project Enterprise Site Area

--`,,```,,,,````-`-`,,`,,`,`,,`---

15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 Rev

RESPONSIBLE ORGANIZATION

43 44 45 46

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

SERVICE IDENTIFICATIONS Continued Process conn diff height Zero datum height Turbulence intensity

47 Inline hazardous area cl Div/Zone Group 48 Inline area min ign temp Temp ident number 49 Remote hazardous area cl Div/Zone Group SERVICE IDENTIFICATIONS 50 Remote area min ign temp Temp ident number Tag no/Functional ident 51 Related equipment 52 Service 53 54 COMPONENT DESIGN CRITERIA P&ID/Reference dwg number 55 Component type Upper conn nozzle number 56 Component style Upper conn pipe spec 57 Output signal type Upper conn nominal size Rating 58 Characteristic curve Upper conn termn type Style 59 Compensation required Upper conn schedule no Wall thickness 60 Type of protection Upper conn length 61 Criticality code Upper conn orientation 62 Max EMI susceptibility Ref Upper conn material type 63 Max temperature effect Ref Connection design code 64 Max response time Lower conn nozzle number 65 Min required accuracy Ref Lower conn pipe spec 66 Max dead band Lower conn nominal size Rating 67 Avail nom power supply Number wires Lower conn termn type Style 68 Min load capability Lower conn schedule no Wall thickness 69 Testing/Listing agency Lower conn length 70 Test requirements Lower conn orientation 71 Supply loss failure mode Lower conn material type 72 Signal loss failure mode Device insertion length 73 Vessel nominal diameter Height 74 PROCESS VARIABLES PROCESS DESIGN CONDITIONS Condition Identification Minimum Normal Maximum Units Pressure Temperature Lower material phase type Lower material density Lower material sp gr Lower material viscosity Lower material level Upper material phase type Upper material density Upper material sp gr Upper material viscosity Upper material level Max material buildup thkns Solids concentration Moisture content Max angle of repose Particle size Cell

Unit

CALCULATED VARIABLES Calc zero el/suppr Calc measurement span

MATERIAL PROPERTIES Lower material name Lower matl composition Lower matl density at ref At Lower dielectric constant At temp Lower material Color Lower NFPA health hazard Flammability Reactivity Date

Revision Description

By

109 110 111 112 113 114 115 116 Appv1 Appv2 Appv3

MATERIAL PROPERTIES Continued Upper material name Upper matl composition Upper matl density at ref At Upper dielectric constant At temp Upper material Color Upper NFPA health hazard Flammability Reactivity REMARKS

© 2001 ISA

Form: 20L1001 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

DIFFERENTIAL PRESSURE DEVICE Operating Parameters

ADMINISTRATIVE IDENTIFICATIONS Project number Sub project no Project Enterprise Site Area Cell Unit

42 43 44 45 46 47 48 SERVICE IDENTIFICATIONS 49 Tag no/Functional ident 50 Related equipment 51 Service 52 53 P&ID/Reference dwg number 54 High side line/nozzle no 55 High side conn pipe spec 56 High side conn nom size Rating 57 High side conn termn type Style 58 High side conn schedule Wall thickness 59 High side conn length 60 High side conn orient 61 High side conn matl type 62 Connection design code 63 Low side line/nozzle no 64 Low side conn pipe spec 65 Low side conn nom size Rating 66 Low side conn termn type Style 67 Low side conn schedule no Wall thickness 68 Low side conn length 69 Low side conn orientation 70 Low side conn matl type 71 Device insertion length 72 PROCESS VARIABLES MATERIAL FLOW CONDITIONS Condition Identification Units High side pressure High side temperature High side matl phase type High side density High side specific gravity High side matl viscosity Low side pressure Low side temperature Low side matl phase type Low side density Low side specific gravity Low side matl viscosity Differential pressure

Date

Revision Description

137 138 139 At 140 Reactivity 141 142 By Appv1 Appv2 Appv3

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

SERVICE IDENTIFICATIONS Continued Process conn diff length Zero datum conn length Inline hazardous area cl Div/Zone Group Inline area min ign temp Temp ident number Remote hazardous area cl Div/Zone Group Remote area min ign temp Temp ident number

COMPONENT DESIGN CRITERIA Component type Component style Output signal type Characteristic curve Type of protection Criticality code Max EMI susceptibility Ref Max temperature effect Ref Max response time Min required accuracy Ref Max dead band Avail nom power supply Number wires Min load capability Testing/Listing agency Test requirements Supply loss failure mode Signal loss failure mode

102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130

CALCULATED VARIABLES Calc zero el / suppr Calc measurement span

MATERIAL PROPERTIES Low side material name Low side composition Low side density at ref Low side NFPA health haz Flammability

6 7 8 9 10

PROCESS DESIGN CONDITIONS Minimum Maximum Units

MATERIAL PROPERTIES Continued High side material name High side composition High side density at ref At High side NFPA health haz Flammability Reactivity REMARKS

Form: 20P1001 Rev 1 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

© 2007 ISA Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 131 132 133 134 135 136 Rev

RESPONSIBLE ORGANIZATION

PRESSURE SAFETY DEVICE Operating Parameters

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

ADMINISTRATIVE IDENTIFICATIONS Project number Sub project no Project Enterprise Site Area Cell Unit

39 SERVICE IDENTIFICATIONS Continued 40 Fire-fighting/Drainage 41 Inline hazardous area cl Div/Zone Group 42 Inline area min ign temp Temp ident number 43 Remote hazardous area cl Div/Zone Group 44 Remote area min ign temp Temp ident number 45 SERVICE IDENTIFICATIONS 46 Tag number 47 COMPONENT DESIGN CRITERIA Related equipment 48 Component type Service 49 Component style 50 Output signal type P&ID/Reference dwg 51 Seat leakage class Fluid service 52 Type of protection Source of overpressure 53 Criticality code Inlet line/nozzle number 54 Set/Burst Pressure Inlet line pipe spec 55 Allowable SPL @ capacity Inlet line nominal size Rating 56 Preliminary selected area Inlet line conn type Style 57 Eff coef of discharge Inlet line material type 58 Disc combination factor Outlet line/nozzle number 59 Avail nom power supply Number wires Outlet line pipe spec 60 Required design code Outlet line nominal size Rating 61 Test requirements Outlet line conn type Style 62 Supply loss failure mode Outlet line material type 63 Signal loss failure mode Vessel wetted area 64 Calculations basis Vessel exposed area 65 Environmental factor 66 PROCESS VARIABLES MATERIAL FLOW CONDITIONS 98 PROCESS DESIGN CONDITIONS Flow Case Identification Non-fire Fire Capacity Units 99 Minimum Normal Maximum Units Allowable overpressure 100 Inlet pressure 101 Build-up back pressure 102 Superimposed back press 103 Inlet temperature 104 Inlet density 105 Inlet phase type vapor 106 Mass fraction vapor 1.0 107 Total mass flow rate 108 Liquid mass flow rate 0 109 Liquid actual flow rate 0 110 Liquid density 111 Liquid specific gravity 112 Liquid viscosity 113 Latent heat vaporization 114 Vapor mass flow rate 115 Vapor actual flow rate 116 Vapor standard flow rate 117 Vapor density 118 Vapor specific gravity 119 Vapor molecular weight 120 Compressibility factor 121 122 CALCULATED VARIABLES 123 Vaporized liquid rate 124 Reqd eff discharge area 125 Calculated SPL@ 3 ft 126 Reaction force 127 128 MATERIAL PROPERTIES 135 MATERIAL PROPERTIES Continued Name 136 Abs critical pressure Composition 137 Critical temperature Liquid specific heat 138 NFPA health hazard Flammability Reactivity Ratio sp heat capacity 139 140 Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20P1002 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

© 2004 ISA

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 129 130 131 132 133 134 Rev

RESPONSIBLE ORGANIZATION

PRESSURE DEVICE

6 7 8 9 10

Operating Parameters

ADMINISTRATIVE IDENTIFICATIONS Project number Sub project no Project Enterprise Site Area Cell Unit

42 43 44 45 46 47 48 SERVICE IDENTIFICATIONS 49 Tag no/Functional ident 50 Related equipment 51 Service 52 53 P&ID/Reference dwg number 54 Line/nozzle number 55 Process conn pipe spec 56 Line/Nozzle nominal size Rating 57 Process conn termn type Style 58 Line/Nozzle schedule no Wall thickness 59 Connection length 60 Connection orientation 61 Line/Nozzle matl type 62 Connection design code 63 Device insertion length 64 Inline hazardous area cl Div/Zone Group 65 Inline area min ign temp Temp ident number 66 Remote hazardous area cl Div/Zone Group 67 Remote area min ign temp Temp ident number 68 69 70 71 72 PROCESS VARIABLES MATERIAL FLOW CONDITIONS Condition Identification Units Pressure Temperature Material phase type Liquid density Liquid specific gravity Liquid viscosity Vapor density Vapor specific gravity Vapor viscosity

COMPONENT DESIGN CRITERIA Component type Component style Output signal type Characteristic curve Type of protection Criticality code Max EMI susceptibility Ref Max temperature effect Ref Max response time Min required accuracy Ref Max dead band Avail nom power supply Number wires Min load capacity Testing/Listing agency Test requirements Supply loss failure mode Signal loss failure mode

CALCULATED VARIABLES Calc zero el / suppr Calc measurement span

MATERIAL PROPERTIES Material name Composition Density at ref NFPA health hazard Flammability Date

Revision Description

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

137 138 139 At 140 Reactivity 141 142 By Appv1 Appv2 Appv3

102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130

PROCESS DESIGN CONDITIONS Minimum Maximum Units

MATERIAL PROPERTIES Continued

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

Form: 20P1003 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

© 2007 ISA Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 131 132 133 134 135 136 Rev

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 133 134 135 136 137 Rev

RESPONSIBLE ORGANIZATION

TEMPERATURE DEVICE Operating Parameters

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

ADMINISTRATIVE IDENTIFICATIONS Project number Sub project no Project Enterprise Site Area Cell Unit

39 SERVICE IDENTIFICATIONS Continued 40 Inline hazardous area cl Div/Zone Group 41 Inline area min ign temp Temp ident number 42 Remote hazardous area cl Div/Zone Group 43 Remote area min ign temp Temp ident number 44 45 SERVICE IDENTIFICATIONS 46 COMPONENT DESIGN CRITERIA Tag no/Functional ident 47 Component type Related equipment 48 Component style Service 49 Output signal type 50 Characteristic curve P&ID/Reference dwg number 51 Type of protection Line/Nozzle number 52 Criticality code Process conn pipe spec 53 Max EMI susceptibility Ref Line/Nozzle nominal size Rating 54 Max temperature effect Ref Process conn termn type Style 55 Max response time Line/Nozzle schedule no Wall thickness 56 Min required accuracy Ref Connection length 57 Max dead band Connection orientation 58 Avail nom power supply Number wires Connection material type 59 Minimum load capability Connection design code 60 Testing/Listing agency Insulation thickness 61 Test requirements Device insertion length 62 Supply loss failure mode 63 Signal loss failure mode 64 65 66 PROCESS VARIABLES MATERIAL FLOW CONDITIONS 100 PROCESS DESIGN CONDITIONS Flow Case Identification Units 101 Minimum Maximum Units Pressure 102 Temperature 103 Phase type 104 Total mass flow rate 105 Liquid mass flow rate 106 Liquid actual flow rate 107 Liquid standard flow rate 108 Liquid density 109 Liquid specific gravity 110 Liquid viscosity 111 Vapor mass flow rate 112 Vapor actual flow rate 113 Vapor standard flow rate 114 Vapor density 115 Vapor specific gravity 116 Vapor molecular weight 117 118 119 120 121 122 123 124 125 CALCULATED VARIABLES 126 Line fluid velocity 127 Line Reynolds number 128 Wake/natural freq ratio 129 130 131 132 MATERIAL PROPERTIES 138 MATERIAL PROPERTIES Continued Name 139 Ratio sp heat factor Composition 140 Emissivity Density at ref temp At 141 NFPA health hazard Flammability Reactivity Ratio sp heat capacity 142 Date Revision Description By Appv1 Appv2 Appv3 REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20T1001 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

RESPONSIBLE ORGANIZATION

WEIGHT OR FORCE DEVICE

6 7 8 9 10

Operating Parameters

ADMINISTRATIVE IDENTIFICATIONS Project number Sub project no Project Enterprise Site Area Cell Unit SERVICE IDENTIFICATIONS Tag no/Functional ident Related equipment Service P&ID/Reference dwg number Washdown environment Vessel orientation Vessel nominal diameter Vessel overall height Vessel support type Qty vessel support points Agitation type Piping connection style Vessel support material Seismic classification

PROCESS VARIABLES Condition Identification Temperature Dead load/empty weight Live load/content weight Tension force

40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

SERVICE IDENTIFICATIONS Continued Local hazardous area cl Div/Zone Group Local area min ign temp Temp ident number Remote hazardous area cl Div/Zone Group Remote area min ign temp Temp ident number

COMPONENT DESIGN CRITERIA Component type Component style Output signal type Characteristic curve Compensation style Type of protection Criticality code Max EMI susceptibility Ref Max response time Min required accuracy Ref Avail nom power supply Number wires Testing/Listing agency Test requirements Supply loss failure mode Signal loss failure mode

PROCESS DESIGN CONDITIONS Minimum Maximum Units

CALCULATED VARIABLES Seismic forces Wind forces     MATERIAL PROPERTIES Name Material phase Density at ref temp At NFPA health hazard Flammability Reactivity Date

Revision Description

By

Appv1 Appv2 Appv3

Form: 20W1001 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 94 95 96 97 98 99 100 101 102 103 104 105 Rev

REMARKS

© 2004 ISA

Not for Resale

RESPONSIBLE ORGANIZATION ENTRAINED/HOLDUP GAS MONITOR Device Specification

SENSOR HEAD COVER Head/Tube cover type Cover style Pipe/Tube nominal size Head cover material Gasket/Seal material

6 SPECIFICATION IDENTIFICATIONS 7 Document no 8 Latest revision Date 9 Issue status 10 TRANSMITTER OR TOTALIZER w/wo SWITCHES Continued Data logger points Measurement compensation Enclosure material

56 57 58 59 60 61 62 63 PERFORMANCE CHARACTERISTICS 64 Min working temperature Max 65 Gas fraction accuracy Ref 66 Gas fraction repeatability Ref 67 Gas fraction LRL URL 68 Update rate 69 Min ambient working temp Max 70 Contacts dc rating At max 71 Max sensor to receiver lg 72 73 74 75 76 77 ACCESSORIES 78 Mounting hardware 79 Thermal blanket 80 81 82 83 SPECIAL REQUIREMENTS 84 Custom tag 85 Reference specification 86 Calibration report 87 Software configuration 88 89 90 91 PHYSICAL DATA 92 Estimated weight 93 Overall length 94 Removal clearance 95 Outside diameter 96 Signal conn nominal size Style 97 Mfr reference dwg 98 99 10 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

SENSING ELEMENT Measurement type Sensor style Band type Band material

CONNECTION HEAD OR PREAMPLIFIER Configuration type Output signal type Enclosure type no/class Signal conn termn style Cert/Approval type LEAD WIRE AND EXTENSION Extension type Cable length Min cable operating temp Max Signal termination type Cert/Approval type Cable jacket material --`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Rev

TRANSMITTER w/wo SWITCHES Configuration type Aux input signal type Output signal type Enclosure type no/class Local operator interface Digital communication std Signal power source Contacts arrangement Quantity Integral indicator style Signal termination type Cert/Approval type Mounting location/type Failure/Diagnostic action Memory interface CALIBRATIONS AND TEST TAG NO/FUNCTIONAL MEAS/SIGNAL/SCALE Gas fraction-Output 1 Speed of sound-Output 2 -Freq output -Digital output Gas fraction-Scale 1 Speed of sound-Scale 2 setpoint-Output Failure signal-Output

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

Revision Description

MANUFACTURER

By

Appv1 Appv2

MODEL NUMBER

Appv3

REMARKS

Form: 20A2391 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

© 2007 ISA

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

DISSOLVED OXYGEN/OZONE/CL2 TRANSMITTER/ANALYZER/MONITOR Device Specification

TRANSMITTER OR ANALYZER Housing type Input sensor type Input sensor style Output signal type Enclosure type no/class Control mode Local operator interface Characteristic curve Digital communication std Signal power source Temperature sensor type Quantity of input sensors Preamplifier location Contacts arrangement Integral indicator style Signal termination type Cert/Approval type Mounting location/type Failure/Diagnostic action Sensor diagnostics Data history log Measurement compensation Calibration function Enclosure material

Quantity

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Meas-Analog output 1 Meas-Analog output 2 Meas-Digital output Meas-Scale Temp-Scale Temp-Digital output Meas setpoint 1-Output Meas setpoint 2-Output Meas setpoint 3-Output Meas setpoint 4-Output Failure signal-Output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

56 PERFORMANCE CHARACTERISTICS 57 pH compensation LRL URL 58 Meas 1 accuracy rating 59 Meas 2 accuracy rating 60 Temp accuracy rating 61 Measurement LRL URL 62 Temp compensation LRL URL 63 Barometric pressure LRL URL 64 Minimum span Max 65 Min ambient working temp Max 66 Contacts ac rating At max 67 Contacts dc rating At max 68 Max distance to sensor lg 69 70 71 72 73 74 75 76 ACCESSORIES 77 Remote indicator style 78 Indicator enclosure 79 Communicator style 80 81 82 83 SPECIAL REQUIREMENTS 84 Custom tag 85 Reference specification 86 Compliance standard 87 Software configuration 88 Software program 89 90 91 92 PHYSICAL DATA 93 Estimated weight 94 Overall height 95 Removal clearance 96 Signal conn nominal size Style 97 Mfr reference dwg 98 99 100 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

Revision Description

MANUFACTURER

By

Appv1 Appv2

MODEL NUMBER

Appv3

Form: 20A2192 Rev 0

© 2004 ISA

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

REMARKS

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Rev

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

pH/ORP SENSOR w/wo INSERTION ASSEMBLY Device Specification

BODY HOLDER OR FITTING Body/Fitting type Process conn nominal size Rating Process conn termn type Style Maximum probe diameter Body/Fitting material Flange material Seal/O ring material

SENSING ELEMENT Sensor type Construction style Measuring electrode shape Reference junction style Insertion/Immersion lg Signal conn termn style Temperature sensor type Sensing surface matl Ref electrolyte material Ground pin material Reference element matl Primary junction matl

LEAD WIRE AND EXTENSION Extension type Cable length Max cable operating temp Signal termination type Cable jacket material ` CONNECTION HEAD OR PREAMPLIFIER Configuration type Temperature compensation Enclosure type no/class Signal termination type Cert/Approval type Mounting location/type Enclosure material

INSERTION ASSEMBLY Assembly type Isolation valve style Process conn nominal size Rating Process conn termn type Style CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Measurement-Output signal Temp-Output signal --`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 INSERTION ASSEMBLY continued 61 Insertion/Immersion lg 62 Valve body material 63 Valve seat material 64 Chamber wetted material 65 Compression ferrule matl 66 67 68 PERFORMANCE CHARACTERISTICS 69 Max press at design temp At 70 Min working temperature Max 71 Min conductivity 72 Max fluid velocity limit 73 Accuracy rating 74 Measurement LRL URL 75 Temp compensation LRL URL 76 Linearity 77 Max response time 78 Min ambient working temp Max 79 Max sensor to receiver lg 80 81 82 83 ACCESSORIES 84 Electrolyte solution 85 Buffer solution 86 Cleaner type 87 Cleaner supply source 88 ORP std solution 89 Rotameter & valve 90 91 92 SPECIAL REQUIREMENTS 93 Custom tag 94 Reference specification 95 Compliance standard 96 Calibration report 97 98 99 100 PHYSICAL DATA 101 Estimated weight 102 Overall height 103 Removal clearance 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT LRV URV LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

Revision Description

MANUFACTURER

By

MODEL NUMBER

Appv1 Appv2 Appv3

Form: 20A2341 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

REMARKS

© 2004 ISA

Not for Resale

RESPONSIBLE ORGANIZATION

pH/ORP/CONDUCTIVITY/RESISTIVITY TRANSMITTER/ANALYZER/MONITOR Device Specification

TRANSMITTER OR ANALYZER Housing type Input sensor type Input sensor style Output signal type Enclosure type no/class Control mode Local operator interface Characteristic curve Digital communication std Signal power source Temperature sensor type Quantity of input sensors Preamplifier location Contacts arrangement Quantity Integral indicator style Signal termination type Cert/Approval type Mounting location/type Failure/Diagnostic action Sensor diagnostics Data history log Temperature compensation Calibration function Enclosure material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Meas-Analog output 1 Meas-Analog output 2 Meas-Digital output Meas-Scale Temp-Scale Temp-Digital output Meas setpoint 1-Output Meas setpoint 2-Output Meas setpoint 3-Output Meas setpoint 4-Output Failure signal-Output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

56 PERFORMANCE CHARACTERISTICS 57 Measurement accuracy 58 Temperature accuracy 59 Measurement LRL URL 60 Temp compensation LRL URL 61 Minimum span Max 62 Min ambient working temp Max 63 Contacts ac rating At max 64 Contacts dc rating At max 65 Max sensor to receiver lg 66 67 68 69 70 71 72 73 74 75 76 ACCESSORIES 77 Remote indicator style 78 Indicator enclosure 79 Communicator style 80 81 82 83 SPECIAL REQUIREMENTS 84 Custom tag 85 Reference specification 86 Compliance standard 87 Software configuration 88 Software program 89 90 91 92 PHYSICAL DATA 93 Estimated weight 94 Overall height 95 Removal clearance 96 Signal conn nominal size Style 97 Mfr reference dwg 98 99 100 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

MANUFACTURER

Revision Description

By

Appv1 Appv2

MODEL NUMBER

Appv3

Form: 20A2342 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

Not for Resale

© 2004 ISA

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Rev

RESPONSIBLE ORGANIZATION

TURBIDITY OR SUSPENDED SOLIDS SENSOR w/wo INTEGRAL TRANSMITTER Device Specification

BODY HOLDER OR FITTING Body/Fitting type Process conn nominal size Rating Process conn termn type Style Maximum probe diameter Body/Fitting material Seal/O ring material

SENSING ELEMENT Sensor type Construction style Measurement wavelength Cleaning type Light source style Insertion/Immersion lg Temperature sensor type Measuring window matl

SIGNAL OR INTEGRAL TRANSMITTER Configuration type Output signal type Enclosure type no/class Digital communication std Signal power source Integral indicator style Signal termination type Cert/Approval type Mounting location/type Calibration function Enclosure material `

LEAD WIRE AND EXTENSION Extension type Cable length Signal termination type Cable jacket material

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

INSERTION ASSEMBLY Assembly type Isolation valve style Process conn nominal size Rating Process conn termn type Style Insertion/Immersion lg CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Meas-Analog 0utput 1 Meas-Analog 0utput 2 Temp-Output signal

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 INSERTION ASSEMBLY continued 61 Valve body material 62 Seal/O ring material 63 Chamber wetted material 64 65 66 PERFORMANCE CHARACTERISTICS 67 Max press at design temp At 68 Min working temperature Max 69 Min flow rate limit Max 70 Max submersion depth 71 Meas accuracy rating Ref 72 Measurement repeatability Ref 73 Measurement LRL URL 74 Temp compensation LRL URL 75 Max sensor to receiver lg 76 77 78 79 80 81 82 83 84 85 ACCESSORIES 86 Calibration kit 87 88 89 90 91 SPECIAL REQUIREMENTS 92 Custom tag 93 Reference specification 94 Compliance standard 95 Calibration report 96 97 98 99 PHYSICAL DATA 100 Estimated weight 101 Face-to-face dimension 102 Overall length/height 103 Removal clearance 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

MANUFACTURER

Revision Description

By

MODEL NUMBER

Appv1 Appv2 Appv3

REMARKS

Form: 20A2351 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

© 2005 ISA

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 Rev

RESPONSIBLE ORGANIZATION

TURBIDITY OR SUSPENDED SOLIDS TRANSMITTER OR CONTROLLER Device Specification

OPERATING PARAMETERS Project number Sub project no Project Enterprise Site Area Cell Unit Related equipment Service P&ID/Reference dwg Number Remote hazardous area cl Remote area min ign temp

Div/Zone Group Temp ident number

TRANSMITTER OR INDICATOR OR CONTROLLER Housing type Input sensor/signal type Range selection style Output signal type Enclosure type no/class Control mode Local operator interface Characteristic curve Digital communication std Signal power source Temperature sensor type Quantity of meas signals Aux input signal type Contacts arrangement Quantity Integral indicator style Signal termination type Cert/Approval type Mounting location/type Failure/Diagnostic action Sensor diagnostics Cleaning control type Measurement compensation Calibration function Enclosure material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Meas-Analog output 1 Meas-Analog output 2 Meas-Analog output 3 Temp-Output signal Measurement-Scale Temperature-Scale Meas setpoint 1-Output Meas setpoint 2-Output Meas setpoint 3-Output Meas setpoint 4-Output Meas setpoint 5-Output Meas setpoint 6-Output Failure signal-Output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

53 PERFORMANCE CHARACTERISTICS 54 Measurement accuracy Ref 55 Temperature accuracy 56 Measurement repeatability Ref 57 Measurement LRL URL 58 Min ambient working temp Max 59 Contacts ac rating At max 60 Contacts dc rating At max 61 62 63 64 65 66 67 68 69 ACCESSORIES 70 Mounting hardware 71 Mating connector 72 73 74 75 76 SPECIAL REQUIREMENTS 77 Custom tag 78 Reference specification 79 Compliance standard 80 Software configuration 81 Software program 82 83 84 85 PHYSICAL DATA 86 Estimated weight 87 Overall width 88 Overall height 89 Overall depth 90 Signal conn nominal size Style 91 Mfr reference dwg 92 93 94 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

Revision Description

Form: 20A2352 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

MANUFACTURER

By

Appv1

Appv2

MODEL NUMBER

Appv3

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

© 2005 ISA

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

HUMIDITY/DEWPOINT TRANSMITTER w/wo SWITCHES Device Specification

MOUNTING FITTING Mounting/Fitting type Process conn nominal size Rating Process conn termn type Style Mounting/Fitting material

SENSING ELEMENT Sensor type Probe style Temperature LRL URL Humidity/Dewpoint LRL URL Temperature sensor type Sensor protection style Probe length Sensor head material

LEAD WIRE AND EXTENSION Extension type RH/Dewpoint cable length Temperature cable length Max cable operating temp Signal termination type

TRANSMITTER w/wo SWITCHES Housing type Output signal type Enclosure type no/class Local operator interface Digital communication std Signal power source Qty of input sensors Contacts arrangement Quantity Integral indicator style Signal termination type Cert/Approval type Mounting location/type Calibration mode Measurement compensation Enclosure material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Humidity-Analog output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 PERFORMANCE CHARACTERISTICS 61 Max press at design temp At 62 Min working temperature Max 63 RH/Dewpoint accuracy 64 Temperature accuracy 65 RH/Dewpoint repeatability 66 Max response time 67 Min ambient working temp Max 68 Contacts ac rating At max 69 Contacts dc rating At max 70 Max sensor to receiver lg 71 72 73 74 75 76 77 78 79 80 81 82 83 ACCESSORIES 84 Calibrator 85 Humidity standards 86 Replacement probe 87 88 89 90 SPECIAL REQUIREMENTS 91 Custom tag 92 Reference specification 93 Compliance standard 94 Calibration report 95 Software configuration 96 97 98 99 PHYSICAL DATA 100 Estimated weight 101 Overall width 102 Overall height 103 Removal clearance 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

Humidity-Scale 1 Other variable-Scale 2 Temp-Analog output Setpoint 1-Output Setpoint 2-Output COMPONENT IDENTIFICATIONS MANUFACTURER

COMPONENT TYPE

Date

Revision Description

Form: 20A2373 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

By

Appv1 Appv2

Appv3

--`,,```,,,,````-`-`,,`,,`,`,,`---

MODEL NUMBER

REMARKS

© 2004 ISA

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

CONDUCTIVITY SENSOR w/wo INSERTION ASSEMBLY Device Specification

BODY HOLDER OR FITTING Body/Fitting type Process conn nominal size Rating Process conn termn type Style Body/Fitting material Flange material Seal/O ring material

SENSING ELEMENT Sensor type Construction style Nominal cell constant Temperature sensor type Bore diameter Insertion/Immersion lg Temp sensor location Insulator material Electrode material Ext shaft/support matl Sheath material

LEAD WIRE AND EXTENSION Extension type Cable length Max cable operating temp Signal termination type Cable jacket material CONNECTION HEAD Housing type Enclosure type no/class Signal termination type Cert/Approval type Mounting location/type Enclosure material INSERTION ASSEMBLY Assembly type Isolation valve style Process conn nominal size Rating Process conn termn type Style Purge conn nominal size Style Insertion/Immersion length Valve body material Valve seat material CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Measurement-Output signal Temp-Output signal

COMPONENT TYPE

Date

Revision Description

6 7 8 9 10

60 INSERTION ASSEMBLY continued 61 Chamber wetted material 62 Compression ferrule matl 63 64 65 PERFORMANCE CHARACTERISTICS 66 Max press at design temp At 67 Min working temperature Max 68 Cell constant accuracy 69 Measurement LRL URL 70 Temp compensation LRL URL 71 Max temp response time 72 Max sensor to receiver lg 73 74 75 76 77 78 79 80 81 82 83 84 85 ACCESSORIES 86 Conductivity standard 87 88 89 90 91 92 SPECIAL REQUIREMENTS 93 Custom tag 94 Reference specification 95 Compliance standard 96 Calibration report 97 98 99 100 PHYSICAL DATA 101 Estimated weight 102 Overall height 103 Removal clearance 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT LRV URV LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

Form: 20A2381 Rev 0

MODEL NUMBER

REMARKS

© 2004 ISA --`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

LINEAR MOTION TYPE CONTROL VALVE ASSEMBLY Device Specification

VALVE BODY AND BONNET Body type Bonnet style Inlet conn nominal size Rating Outlet conn nominal size Rating End conn termn type Style Flange facing finish Stem seal type Face-to-face standard Yoke boss diameter Body and bonnet material Lining material Body/Bonnet bolting matl Packing flg bolting matl Gasket material Packing material Bellows seal material VALVE TRIM Closure member type Trim style Inherent characteristic Seat ring type Flow direction force Port/Orifice diameter Stem diameter Closure member material Seat ring material Stem material Cage material Guide/Retainer material Guide bushing material Hard facing/coating

Rt travel

ACTUATOR Actuator type Acting style Effective area Bench set LRL Max supply capability Handwheel type/position Casing/cylinder material Diaphragm/O ring matl Yoke material

URL

SIGNAL TRANSDUCER Input signal type Output signal type Accuracy rating CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Bench set-Travel Positioner input-Travel Transducer input-Output Test pressure

COMPONENT TYPE

Date

Revision Description

6 7 8 9 10

60 SIGNAL TRANSDUCER continued 61 Enclosure type no/class 62 Digital communication std 63 Signal power source 64 Pressure gauges 65 Cert/Approval type 66 Mounting location/type 67 Enclosure material 68 69 POSITIONER OR CONTROLLER 70 Configuration type 71 Input signal type 72 Enclosure type no/class 73 Signal power source 74 Digital communication std 75 Cert/Approval type 76 Pressure gauges 77 By-pass manifold 78 Enclosure material 79 80 PERFORMANCE CHARACTERISTICS 81 Max press at design temp At 82 Min working temperature Max 83 Max pressure drop 84 Rated flow coef type Coef Xt 85 Rated factor Fl Sigma mr 86 Rated seat leakage class 87 88 ACCESSORIES 89 Air set filter style 90 Air set gauges 91 Tubing nominal size 92 Tubing and fitting matl 93 94 SPECIAL REQUIREMENTS 95 Custom tag 96 Reference specification 97 Special preparation 98 Compliance standard 99 Construction code 100 Software configuration 101 102 PHYSICAL DATA 103 Estimated weight 104 Face-to-face dimension 105 Overall height 106 Removal clearance 107 Mfr reference dwg 108 INPUT OR TEST OUTPUT LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20C2001 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

LINEAR MOTION TYPE CONTROL VALVE AUXILIARIES Device Specification

POSITION SWITCHES Housing type Sensor style Output signal type Enclosure type no/class Contacts ac rating At Max Contacts dc rating At Max Contacts arrangement Quantity Integral indicator style Signal termination type Cert/Approval type Mounting location/type Enclosure material Shaft material Bushing material Fastener material Gasket/O ring material

SOLENOID OR PILOT VALVE Body type Enclosure style Inlet conn nominal size Style Coil watt rating Coil insulation class Enclosure type no/class Min operating press diff Max Signal power source Manual operator type Type of actuation Coil type Operation style Press port orifice size Exhaust port Signal termination type Cert/Approval type Mounting location/type Enclosure material Body material Seat/Disc/Diaphragm matl

POSITION TRANSMITTER Housing type Sensor style Output signal type Accuracy/Linearity rating Enclosure type no/class Digital communication std Signal power source CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Position-Analog output Solenoid energized-Output Position setpoint-Output Supply setpoint–Output Emissions setpoint–Output

6 7 8 9 10

60 POSITION TRANSMITTER continued 61 Integral indicator style 62 Signal termination type 63 Cert/Approval type 64 Mounting location/type 65 Enclosure material 66 67 68 SUPPLY PRESSURE TRIP VALVE 69 Configuration type 70 Volume tank size 71 Trip set pressure reset 72 Tank max working pressure 73 Min supply capability Max 74 Trip set pressure LRL URL 75 Construction code 76 Mounting location/type 77 Body material 78 Diaphragm/O ring material 79 80 EMISSIONS MONITOR SWITCH 81 Sensor type 82 Housing type 83 Inlet conn nominal size Style 84 Output signal type 85 Enclosure type no/class 86 Contacts ac rating At Max 87 Contacts dc rating At Max 88 Contacts arrangement 89 Integral indicator style 90 Signal termination type 91 Cert/Approval type 92 Mounting location/type 93 Enclosure material 94 Diaphragm material 95 96 97 BOOSTER RELAY 98 Configuration type 99 End conn nominal size Style 100 Dead band rating 101 Max supply capability 102 Supply port size Exh port 103 Body material 104 Closure member matl 105 Diaphragm material 106 Test conn material 107 Gasket/O ring material 108 INPUT OR SETPOINT OUTPUT LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE MANUFACTURER Position transmitter Solenoid/Pilot valve Position switch Supply press trip valve Emissions monitor Booster relay Date Revision Description By Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

//^:^^#^~^^"~~:~"~$$"~$^"#

© 2001 ISA

Form: 20C2002 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date: Issue status

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Not for Resale

ROTARY MOTION TYPE CONTROL VALVE ASSEMBLY Device Specification

VALVE BODY AND BONNET Body type Bonnet style Inlet conn nominal size Rating Outlet conn nominal size Rating End conn termn type Style Flange facing finish Shaft seal type Face-to-face standard Yoke boss diameter Body and bonnet material Lining material Body/Bonnet bolting matl Packing flg bolting matl Gasket material Packing material

VALVE TRIM Closure member type Trim style Inherent characteristic Seal ring type Flow direction force Shaft diameter Closure member material Seal ring material Shaft material Flow ring material Guide/Retainer material Guide bushing material Hard facing/coating

Rated travel

ACTUATOR Actuator type Effective area Bench set LRL Max supply capability Handwheel type/position Mounting orientation Casing/cylinder material Diaphragm/O ring matl Yoke material

URL

SIGNAL TRANSDUCER Input signal type Output signal type Accuracy rating CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Bench set-Travel Positioner input-Travel Transducer input-Output Test pressure

COMPONENT TYPE

Date

Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 SIGNAL TRANSDUCER Continued 61 Enclosure type no/class 62 Digital communication std 63 Signal power source 64 Pressure gauges 65 Cert/Approval type 66 Mounting location/type 67 Enclosure material 68 69 POSITIONER OR CONTROLLER 70 Configuration type 71 Input signal type 72 Enclosure type no/class 73 Signal power source 74 Digital communication std 75 Cert/Approval type 76 Pressure gauges 77 By-pass manifold 78 Enclosure material 79 80 PERFORMANCE CHARACTERISTICS 81 Max press at design temp At 82 Min working temperature Max 83 Max pressure drop 84 Rated flow coef type Coef Xt 85 Rated factor Fl Sigma mr 86 Rated seat leakage class 87 88 ACCESSORIES 89 Air set filter style 90 Air set gauges 91 Tubing nominal size 92 Tubing and fitting matl 93 94 SPECIAL REQUIREMENTS 95 Custom tag 96 Reference specification 97 Special preparation 98 Compliance standard 99 Construction code 100 Software configuration 101 102 PHYSICAL DATA 103 Estimated weight 104 Face-to-Face dimension 105 Overall height 106 Removal clearance 107 Mfr reference dwg 108 INPUT OR TEST OUTPUT LRV URV ACTION LRV URV

Appv1 Appv2 Appv3

Form: 20C2011 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

MODEL NUMBER

REMARKS

© 2001 ISA

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

--`,,```,,,,````-`-`,,`,,`,`,,`---

RESPONSIBLE ORGANIZATION

ROTARY MOTION TYPE CONTROL VALVE AUXILIARIES Device Specification

POSITION SWITCHES Housing type Sensor style Output signal type Enclosure type no/class Contacts ac rating At Max Contacts dc rating At Max Contacts arrangement Quantity Integral indicator style Signal termination type Cert/Approval type Mounting location/type Enclosure material Shaft material Bushing material Fastener material Gasket/O ring material

SOLENOID OR PILOT VALVE Body type Enclosure style Inlet conn nominal size Style Coil watt rating Coil insulation class Enclosure type no/class Min operating press diff Max Signal power source Manual operator type Type of actuation Coil type Operation style Press port orifice size Exhaust port Signal termination type Cert/Approval type Mounting location/type Enclosure material Body material Seat/Disc/Diaphragm matl

POSITION TRANSMITTER Housing type Sensor style Output signal type Accuracy/Linearity rating Enclosure type no/class Digital communication std Signal power source CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Position-Analog output Solenoid energized-Output Position setpoint-Output Supply setpoint-Output Emissions setpoint-Output

COMPONENT TYPE Position transmitter Solenoid/Pilot valve Position switch Supply press trip valve Emissions monitor Booster relay Date Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 POSITION TRANSMITTER continued 61 Integral indicator style 62 Signal termination type 63 Cert/Approval type 64 Mounting location/type 65 Enclosure material 66 67 68 SUPPLY PRESSURE TRIP VALVE 69 Configuration type 70 Volume tank size 71 Trip set pressure reset 72 Tank max working pressure 73 Min supply capability Max 74 Trip set pressure LRL URL 75 Construction code 76 Mounting location/type 77 Body material 78 Diaphragm/O ring material 79 80 EMISSIONS MONITOR SWITCH 81 Sensor type 82 Housing type 83 Inlet conn nominal size Style 84 Output signal type 85 Enclosure type no/class 86 Contacts ac rating At Max 87 Contacts dc rating At Max 88 Contacts arrangement 89 Integral indicator style 90 Signal termination type 91 Cert/Approval type 92 Mounting location/type 93 Enclosure material 94 Diaphragm material 95 96 97 BOOSTER RELAY 98 Configuration type 99 End conn nominal size Style 100 Dead band rating 101 Max supply capability 102 Supply port size Exh port 103 Body material 104 Closure member matl 105 Diaphragm material 106 Test conn material 107 Gasket/O ring material 108 INPUT OR SETPOINT OUTPUT LRV URV ACTION LRV URV

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20C2012 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

LINEAR MOTION TYPE MOTOR OPERATED VALVE ASSEMBLY Device Specification

VALVE BODY AND BONNET Body type Bonnet style Inlet conn nominal size Rating Outlet conn nominal size Rating End conn termn type Style Flange facing finish Stem seal type Face-to-face standard Yoke boss diameter Body and bonnet material Lining material Body/Bonnet bolting matl Packing flg bolting matl Gasket material Packing material Bellows seal material

75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 VALVE TRIM 93 Closure member type 94 Trim style 95 Inherent characteristic 96 Seat ring type 97 Flow direction force 98 Port/Orifice diameter 99 Stem diameter Rt travel 100 Closure member material 101 Seat ring material 102 Stem material 103 Cage material 104 Guide/Retainer material 105 Guide bushing material 106 Hard facing/coating 107 108 GEAR REDUCER 109 Gear reducer type 110 Position lock style 111 Nominal size 112 Mounting base nom size Standard 113 Output nominal speed 114 Handwheel gear ratio 115 Gearbox ratio 116 Rated output torque Thrust 117 Linear speed 118 Manual operator type 119 Stem coupling style 120 Stem nominal diameter Lead of screw 121 Handwheel diameter 122 Handwheel orientation 123 Travel stops 124 Bevel pinion material 125 Bevel gear matl 126 Housing material 127 Bushing/Coupling/Nut matl 128 Lubricant material 129 130 131 ACTUATOR 132 Actuator type 133 Motor style 134 Motor nominal speed number of poles 135 Power supply 136 Insulation class rating 137 Motor phase style 138 Date Revision Description By Appv1 Appv2 Appv3

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

ACTUATOR Continuation Motor contactor type Motor thermal protection Motor phase protection CONTROL MODULE Enclosure type Operation style Input signal type Enclosure type no/class Control mode Digital communication std Internal power supply Space heater type Output speed control Auxiliary control power Open/Close control Local/Stop/Remote cont Local operator interface Signal termination type Cert/Approval type ESD control mode Failure/Diagnostic action Interlock/Inhibit mode Diagnostics capabilities Motor reversal protection Enclosure material Hardware material

POSITION SWITCH OR TRANSMITTER Output signal type Sensor style Contacts ac rating At max Contacts dc rating At max Signal power source Contacts arrangement Quantity Integral indicator style Position light colors TORQUE SWITCH OR TRANSMITTER Output signal type Sensor style Contacts ac rating At max Contacts dc rating At max Signal power source Contacts arrangement Quantity Integral indicator style Protection feature AUXILIARY INPUTS AND OUTPUTS Configuration type Aux signal type Output signal type Status contacts ac rating At max Status contacts dc rating At max Alarm contacts ac rating At max Alarm contacts dc rating At max Input signal power source Output signal pwr source Status contacts arr Quantity Alarm contacts arr Quantity

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International of Automation Form:Society 20C2041 Rev 0 Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

© 2007 ISA Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 Rev

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 Rev

RESPONSIBLE ORGANIZATION

LINEAR MOTION TYPE MOTOR OPERATED VALVE ASSEMBLY Device Specification

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Max pressure drop Maximum starts per hour Positioning accuracy Ref Position accuracy rating Ref Torque accuracy rating Ref Torque adjustment LRL URL Max starting current Rated flow coef type Coef Xt Rated factor Fl Sigma mr Rated seat leakage class Max valve reqd torque Thrust Design life cycles Min ambient working temp Max

ACCESSORIES Isolation switch Local control station Auxiliary power device

SPECIAL REQUIREMENTS Custom tag Reference specification Special preparation Compliance standard Construction code Calculation report Software program Service design

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL MEAS/SIGNAL/SCALE Position input-Travel Close sw energized-Travel Open sw energized-Travel Position-Output Torque-Output Position-Scale Aux input 1-Output Aux input 2-Output Aux input 3-Output Aux input 4-Output Position close sw-Output Position open sw-Output Torque close sw-Output Torque open sw-Output Aux output 1-Output Aux output 2-Output Aux output 3-Output Aux output 4-Output Failure signal-Output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

246 PHYSICAL DATA 247 Estimated weight 248 Face-to-face dimension 249 Overall height 250 Removal clearance 251 Signal conn nominal size Style 252 Mfr reference dwg 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

Revision Description

Copyright International of Automation Form:Society 20C2041 Rev 0 Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

MANUFACTURER

By

Appv1 Appv2

MODEL NUMBER

Appv3

REMARKS

© 2007 ISA Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 Rev

RESPONSIBLE ORGANIZATION

ROTARY MOTION TYPE MOTOR OPERATED VALVE ASSEMBLY Device Specification

VALVE BODY AND BONNET Body type Bonnet style Inlet conn nominal size Rating Outlet conn nominal size Rating End conn termn type Style Flange facing finish Shaft seal type Face-to-face standard Yoke boss diameter Body and bonnet material Lining material Body/Bonnet bolting matl Packing flg bolting matl Gasket material Packing material

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 VALVE TRIM 93 Closure member type 94 Trim style 95 Inherent characteristic 96 Seal ring type 97 Flow direction force 98 Shaft diameter Rt travel 99 Closure member material 100 Seal ring material 101 Shaft material 102 Flow ring material 103 Guide/Retainer material 104 Guide bushing material 105 Hard facing/coating 106 107 108 GEAR REDUCER 109 Gear reducer type 110 Position lock style 111 Nominal size 112 Mounting base nom size Standard 113 Output nominal speed 114 Handwheel gear ratio 115 Gearbox ratio 116 Rated output torque Thrust 117 90 degree travel time 118 Manual operator type 119 Stem coupling style 120 Max stem capacity 121 Handwheel diameter 122 Handwheel orientation 123 Travel stops 124 Worm/Spear material 125 Worm/Helical gear matl 126 Housing material 127 Bushing/Coupling/Nut matl 128 Lubricant material 129 130 131 ACTUATOR 132 Actuator type 133 Motor style 134 Motor nominal speed number of poles 135 Power supply 136 Insulation class rating 137 Motor phase style 138 Date Revision Description By Appv1 Appv2 Appv3

Copyright International of Automation Form:Society 20C2042 Rev 0 Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

ACTUATOR Continuation Motor contactor type Motor thermal protection Motor phase protection CONTROL MODULE Enclosure type Operation style Input signal type Enclosure type no/class Control mode Digital communication std Internal power supply Space heater type Output speed control Auxiliary control power Open/Close control Local/Stop/Remote cont Local operator interface Signal termination type Cert/Approval type ESD control mode Failure/Diagnostic action Interlock/Inhibit mode Diagnostics capabilities Motor reversal protection Enclosure material Hardware material

POSITION SWITCH OR TRANSMITTER Output signal type Sensor style Contacts ac rating At max Contacts dc rating At max Signal power source Contacts arrangement Quantity Integral indicator style Position light colors TORQUE SWITCH OR TRANSMITTER Output signal type Sensor style Contacts ac rating At max Contacts dc rating At max Signal power source Contacts arrangement Quantity Integral indicator style Protection feature AUXILIARY INPUTS AND OUTPUTS Configuration type Aux signal type Output signal type Status contacts ac rating At max Status contacts dc rating At max Alarm contacts ac rating At max Alarm contacts dc rating At max Input signal power source Output signal pwr source Status contacts arr Quantity Alarm contacts arr Quantity

REMARKS

© 2007 ISA Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

RESPONSIBLE ORGANIZATION

ROTARY MOTION TYPE MOTOR OPERATED VALVE ASSEMBLY Device Specification

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Max pressure drop Maximum starts per hour Positioning accuracy Ref Position accuracy rating Ref Torque accuracy rating Ref Torque adjustment LRL URL Max starting current Rated flow coef type Coef Xt Rated factor Fl Sigma mr Rated seat leakage class Max valve reqd torque Thrust Design life cycles Min ambient working temp Max

ACCESSORIES Isolation switch Local control station Auxiliary power device

SPECIAL REQUIREMENTS Custom tag Reference specification Special preparation Compliance standard Construction code Calculation report Software program Service design

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL MEAS/SIGNAL/SCALE Position input-Travel Close sw energized-Travel Open sw energized-Travel Position-Output Torque-Output Position-Scale Aux input 1-Output Aux input 2-Output Aux input 3-Output Aux input 4-Output Position close sw-Output Position open sw-Output Torque close sw-Output Torque open sw-Output Aux output 1-Output Aux output 2-Output Aux output 3-Output Aux output 4-Output Failure signal-Output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

246 PHYSICAL DATA 247 Estimated weight 248 Face-to-face dimension 249 Overall height 250 Removal clearance 251 Signal conn nominal size Style 252 Mfr reference dwg 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

Revision Description

Copyright International of Automation Form:Society 20C2042 Rev 0 Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

MANUFACTURER

By

Appv1 Appv2

MODEL NUMBER

Appv3

REMARKS

© 2007 ISA Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 Rev

RESPONSIBLE ORGANIZATION

ELECTRIC ACTUATOR AND AUXILIARIES Device Specification

OPERATING PARAMETERS Project number Sub project no Project Enterprise Site Area Cell Unit Driven component tag no Related equipment Service

75 76 77 78 79 80 81 82 83 84 P&ID/Reference dwg number 85 Inline hazardous area cl Div/Zone Group 86 Inline area min ign temp Temp ident number 87 Driven component type 88 Actuator sizing factor 89 90 91 MOUNTING HARDWARE AND LINKAGE 92 Mounting/Linkage type 93 Max torque rating 94 Drive arm type 95 Driven arm type 96 Rod end type 97 Drive arm size 98 Driven arm size 99 Pin hole/Tap size 100 Mounting hole size 101 Shaft conn size 102 Arm thickness 103 Adapter style 104 Mounting conn location 105 Mounting hardware matl 106 Linkage material 107 108 GEAR REDUCER 109 Gear reducer type 110 Position lock style 111 Nominal size 112 Mounting base nom size Standard 113 Output nominal speed 114 Handwheel gear ratio 115 Gearbox ratio 116 Rated output torque Thrust 117 Speed/90 ° travel time 118 Manual operator type 119 Stem coupling style 120 Stem nominal diameter Lead of screw 121 Handwheel diameter 122 Handwheel orientation 123 Travel stops 124 Worm/Bevel pinion matl 125 Worm/Bevel gear matl 126 Housing material 127 Bushing/Coupling/Nut matl 128 Lubricant material 129 130 131 ACTUATOR 132 Actuator type 133 Motor style 134 Motor nominal speed number of poles 135 Power supply 136 Insulation class rating 137 Motor phase style 138 Date Revision Description By Appv1 Appv2 Appv3

Copyright International of Automation Form:Society 20C2043 Rev 0 Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

ACTUATOR Continuation Motor contactor type Motor thermal protection Motor phase protection CONTROL MODULE Enclosure type Operation style Input signal type Enclosure type no/class Control mode Digital communication std Internal power supply Space heater type Output speed control Auxiliary control power Open/Close control Local/Stop/Remote cont Local operator interface Signal termination type Cert/Approval type ESD control mode Failure/Diagnostic action Interlock/Inhibit mode Diagnostics capabilities Motor reversal protection Enclosure material Hardware material

POSITION SWITCH OR TRANSMITTER Output signal type Sensor style Contacts ac rating At max Contacts dc rating At max Signal power source Contacts arrangement Quantity Integral indicator style Position light colors TORQUE SWITCH OR TRANSMITTER Output signal type Sensor style Contacts ac rating At max Contacts dc rating At max Signal power source Contacts arrangement Quantity Integral indicator style Protection feature AUXILIARY INPUTS AND OUTPUTS Configuration type Aux signal type Output signal type Status contacts ac rating At max Status contacts dc rating At max Alarm contacts ac rating At max Alarm contacts dc rating At max Input signal power source Output signal pwr source Status contacts arr Quantity Alarm contacts arr Quantity

REMARKS

© 2007 ISA Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 Rev

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 Rev

RESPONSIBLE ORGANIZATION

ELECTRIC ACTUATOR AND AUXILIARIES Device Specification

PERFORMANCE CHARACTERISTICS Maximum starts per hour Positioning accuracy Ref Position accuracy rating Ref Torque accuracy rating Ref Torque adjustment LRL URL Max starting current Maximum required torque Thrust Design life cycles Min ambient working temp Max

ACCESSORIES Isolation switch Local control station Auxiliary power device

SPECIAL REQUIREMENTS Custom tag Reference specification Compliance standard Software program Service design Assembly responsibility

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL MEAS/SIGNAL/SCALE Position input-Travel Close sw energized-Travel Open sw energized-Travel Position-Output Torque-Output Position-Scale Aux input 1-Output Aux input 2-Output Aux input 3-Output Aux input 4-Output Position close sw-Output Position open sw-Output Torque close sw-Output Torque open sw-Output Aux output 1-Output Aux output 2-Output Aux output 3-Output Aux output 4-Output Failure signal-Output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

246 PHYSICAL DATA 247 Estimated weight 248 Overall width 249 Overall height 250 Overall depth 251 Signal conn nominal size Style 252 Mfr reference dwg 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

Revision Description

MANUFACTURER

By

Appv1 Appv2

MODEL NUMBER

Appv3

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International of Automation Form:Society 20C2043 Rev 0 Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

REMARKS

© 2007 ISA Not for Resale

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 120 121 122 123 124 125 126 127 128 129 130 131 Rev

RESPONSIBLE ORGANIZATION

PRESSURE REGULATOR w/wo PILOT VALVE Device Specification

VALVE BODY AND LOWER CASING Body type Bonnet/Casing conn style Inlet conn nominal size Rating Outlet conn nom size Rating End conn termn type Style Control conn nom size Style Control conn location Body/Casing material Bolting material Gasket/O ring material

VALVE TRIM Closure member type Trim style Port/Orifice nominal size Closure member material Seat ring/Holder matl Guide/Bushing material Stem material Seat disk/O ring material Filter/Strainer material

ACTUATOR AND SPRING CASE Actuator type Housing style Actuator nominal size Vent/Load conn nom size Style Vent/Load conn location Pressure/Diff press LRL URL Adjuster type Control spring id Relief spring ident Diaphragm nominal dia Vent assembly style Case vent orientation Integral relief style Spring case/Flange matl Diaphragm material Relief valve seat matl Spring material Closing cap material

PILOT REGULATOR Actuator type End conn nominal size Style Adjuster type Control spring id Diaphragm nominal dia Mounting location/type CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Initial set pressure

COMPONENT TYPE

Date

Revision Description

Form: 20C2111 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

64 PILOT REGULATOR continued 65 Body material 66 Spring case material 67 Bolting material 68 Seat ring material 69 Spring material 70 Diaphragm material 71 Closing cap material 72 Gasket/Body seal matl 73 Seat disk/O ring material 74 Loading tubing material 75 76 77 PERFORMANCE CHARACTERISTICS 78 Max Inlet press at temp At 79 Max outlet press at temp At 80 Min working temp Max 81 Min diff pressure Max 82 Max case/Diaphragm press 83 Accuracy rating 84 Offset/Proportional band 85 Max overpressure Above 86 Rated flow coef type Coef Xt 87 Rated factor FL 88 Wide-open flow coef 89 Relief valve flow coef 90 Rated seat leakage class 91 Lockup Ref 92 93 94 ACCESSORIES 95 Pressure gauge 96 Relief valve 97 Line/Inlet strainer 98 99 100 SPECIAL REQUIREMENTS 101 Custom tag 102 Reference specification 103 Special preparation 104 Compliance standard 105 Cert/Approval type 106 Service design 107 108 109 PHYSICAL DATA 110 Estimated weight 111 Face-to-face dimension 112 Overall height 113 Removal clearance 114 Mfr reference dwg 115 116 INPUT OR SETPOINT LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2007 ISA

--`,,```,,,,````-`-`,,`,,`,`,,`---

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 RESPONSIBLE ORGANIZATION AIR-RELEASE OR AIR/VACUUM 6 SPECIFICATION IDENTIFICATIONS 2 AND COMBINATION AIR VALVES 7 Document no 3 Device Specification 8 Latest revision Date 4 9 Issue status 5 10 11 OPERATING PARAMETERS 64 AIR-RELEASE VALVE 12 Project number Sub project no 65 Body type 13 Project 66 Inlet conn nominal size Rating 14 Enterprise 67 Inlet conn termn type Style 15 Site 68 Outlet conn nominal size Rating 16 Area Cell Unit 69 Outlet conn termn type Style 17 Related equipment 70 Flushing conn nom size Style Service 18 71 Closure member type 19 72 Lever style 20 P&ID/Reference dwg 73 Mounting location/type 21 Upstream line number 74 Orifice size 22 Upstream line pipe spec 75 Body, cover & top matl 23 Upstr line nominal size Rating 76 Closure member matl 24 Upstr line conn type Style 77 Seat/Seal material 25 Upstr line schedule no Wall thickness 78 Float material 26 Upstr line material type 79 Trim material 27 Liq actl flow at max dr 80 Gasket/O ring material 28 Liq flow at air release 81 29 Liq actl flow at max fill 82 SURGE PROTECTION DEVICE 30 Air std flow at max dr 83 Configuration type 31 Air flow at air release 84 Closure member style 32 Air std flow at max fill 85 Nominal size 33 Press diff at max dr 86 Body material 34 Press diff at air release 87 Closure member matl 35 Press diff at max filling 88 36  Fluid vel at max filling 89 PERFORMANCE CHARACTERISTICS 37  Material name 90 Max press at design temp At 38  Density at ref temp At 91 Min working temperature Max Reactivity 39  NFPA health hazard 92 Min working pressure Max  Flammability  40  93 Air release at max press At 41  94 Rated air inflow at dp At 42  95 Rated air outflow at dp At 43  AIR/VACUUM VALVE BODY 96 Rated seat leakage 44  Body type 97 45  Inlet conn nominal size Rating 98 ACCESSORIES 46  Inlet conn termn type Style 99 Back flush assembly 47  Outlet conn nominal size Rating 100 Back flush valves 48  Outlet conn termn type Style 101 Isolation valve 49  Flushing conn nom size Style 102 Inlet piping assembly 50  Body, cover & top matl 103 51  Outlet protector material 104 SPECIAL REQUIREMENTS 52  Gasket/O ring material 105 Custom tag 53  106 Reference specification 54  107 Compliance standard 55  AIR/VACUUM VALVE TRIM 108 Cert/Approval type 56  Closure member type 109 Service design 57  Orifice style 110 58  Closure member material 111 PHYSICAL DATA 59  Seat material 112 Estimated weight 60  Float material 113 Overall height 61  Trim material 114 Overall diameter/width 62  115 Mfr reference dwg 63  116 117 CALIBRATIONS AND TEST TEST 118 TAG NUMBER TEST URV 119  Test pressure 120 121 122 123 COMPONENT IDENTIFICATIONS 124 COMPONENT TYPE MANUFACTURER MODEL NUMBER 125  126  127  128  Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS                                                 Form: 20C2141 Rev 0 © 2005 ISA

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

ELBOW FLOW METER Device Specification

ELBOW FITTING Fitting type Elbow nominal size End conn nominal size Rating End conn termn type Style Elbow schedule number Wall thickness Press tap conn nom size Rating Pressure tap conn type Style High pressure tap location Low pressure tap location Discharge straight length Fitting material Flange material

FLOW CONDITIONER Flow conditioner type End conn nominal size Rating Inlet conn termn type Style Pipe/Tube schedule number Outlet conn termn type Pipe/Tube material Flow conditioner material Flange material

ISOLATION VALVES AND FITTINGS Valve type End conn nominal size Rating End conn termn type Style Connection fitting type Nipple nominal size Valve body material Nipple material Connection fitting matl Valve seal material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Flow rate-Diff pressure Test pressure

Revision Description

Form: 20F2011 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 PERFORMANCE CHARACTERISTICS 61 Max press at design temp At 62 Min working temperature Max 63 Uncalibrated accuracy 64 Calibrated accuracy 65 Discharge coefficient 66 Perm head loss at URL 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 ACCESSORIES 88 89 90 91 SPECIAL REQUIREMENTS 92 Custom tag 93 Reference specification 94 Compliance standard 95 Construction code 96 Calibration report 97 Special inspections 98 99 100 101 PHYSICAL DATA 102 Estimated weight 103 Inlet to disch centerline 104 Outlet to inlet centerline 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT LRV URV LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

COMPONENT TYPE

Date

6 7 8 9 10

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2007 ISA

--`,,```,,,,````-`-`,,`,,`,`,,`---

Not for Resale

RESPONSIBLE ORGANIZATION

FLOW NOZZLE w/wo METER TUBE Device Specification

BODY Body type Fabrication style Process conn nominal size End conn termn type Flange facing finish Pressure tap quantity Press tap conn nom size Stampings Nozzle material

Rating Style

Style

THROAT Diameter ratio (Beta d/D) Throat diameter

METER TUBE Bore type End conn nominal size End conn termn type Flange facing finish Upstream length Pipe schedule no Downstream length Coupling quantity Coupling nominal size Coupling locations Internal bore diameter Flow straightener type Pipe/Tube material Flow straightener matl Bolting material Exterior coating material End termination material Gasket material Diffuser cone material

Rating Style

Rating

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Flow rate–Diff pressure Test pressure

COMPONENT TYPE

Date

Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 PERFORMANCE CHARACTERISTICS 61 Max press at design temp At 62 Min working temperature Max 63 Uncalibrated accuracy 64 Perm head loss at URL 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 ACCESSORIES 86 Purge system 87 88 89 90 91 92 SPECIAL REQUIREMENTS 93 Custom tag 94 Reference specification 95 Special preparation 96 Compliance standard 97 Construction code 98 Calibration report 99 Weld radiographs 100 101 PHYSICAL DATA 102 Estimated weight 103 Face-to-face dimension 104 Removal clearance 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT LRV URV LRV URV

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20F2021 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Not for Resale

RESPONSIBLE ORGANIZATION

ORIFICE PLATE

6 7 8 9 10

Device Specification

ORIFICE PLATE AND HOLDER Plate type Holder/Seal unit style Nominal size API ring no Orifice flange nom rating Orifice bore type Orifice inlet edge style Diameter ratio (Beta d/D) Orifice bore diameter Plate outside diameter Plate thickness Vent/Drain hole size Vent/Drain hole location Stampings required Plate material Seal material Holder/Ring material

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Flow rate-Diff pressure

COMPONENT TYPE

Date

Revision Description

ACCESSORIES Orifice holding block Gasket set

SPECIAL REQUIREMENTS Custom tag Reference specification Special preparation Compliance standard Calculation report

PHYSICAL DATA Estimated weight Removal clearance Mfr reference dwg

INPUT LRV

Appv1 Appv2 Appv3

LRV

URV

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20F2031Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

OUTPUT URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Not for Resale

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

ORIFICE PLATE ASSEMBLY w/wo METER TUBE Device Specification

ORIFICE FLANGE OR FITTING Flange/Fitting type Pressure tap style End conn nominal size Rating End conn termn type Style Flange facing finish End conn schedule no Press tap conn nom size Style Pressure tap orientation Tap connection plug type Centering/Dowel pins Jack screw material Flange/Fitting material Trim material Bolting material Gasket material Lubrication material

ORIFICE PLATE AND HOLDER Plate type Holder/Seal unit style API ring no Rating Orifice bore type Orifice inlet edge style Diameter ratio (Beta d/D) Orifice bore diameter Plate outside diameter Plate thickness Vent/Drain hole size Vent/Drain hole location Stampings Plate material Seal material Holder/Ring material

METER TUBE Bore type End conn nominal size Rating End conn termn category Style Flange facing finish Upstream length Pipe schedule no Downstream length Coupling quantity Coupling nominal size Rating CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Flow rate – Diff pressure Test pressure

COMPONENT TYPE

Date

Revision Description

6 7 8 9 10

60 METER TUBE Continued 61 Coupling locations 62 Internal bore diameter 63 Flow straightener type 64 Pipe/Tube material 65 Bolting material 66 Exterior coating material 67 End termination material 68 Gasket material 69 70 71 72 PERFORMANCE CHARACTERISTICS 73 Max press at design temp At 74 Min working temperature Max 75 76 77 78 79 80 81 82 83 84 ACCESSORIES 85 Orifice holding blocks 86 87 88 89 90 91 SPECIAL REQUIREMENTS 92 Custom tag 93 Reference specification 94 Special preparation 95 Compliance standard 96 Construction code 97 98 99 100 PHYSICAL DATA 101 Estimated weight 102 Face-to-face dimension 103 Overall height 104 Removal clearance 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT LRV URV LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20F2041 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

MULTIVARIABLE FLOW TRANSMITTER Device Specification

TRANSMITTER BODY Body/Flange type Process conn nominal size Rating Process conn termn type Style Vent/Drain location Mounting type Body/Flange material Vent/Drain material Bolting material Flange adapter material Gasket/O ring material Mounting kit material

SENSING ELEMENT Detector type Min diff pressure span Max Min pressure span Max Temp input signal Diaphragm/Wetted material Fill fluid material

TRANSMITTER Output signal type Enclosure type no/class Characteristic curve Digital communication std Signal power source Transient protection Integral indicator style Signal termination type Cert/Approval type Span-Zero adjust lct Failure/Diagnostic action Enclosure material

6 7 8 9 10

60 PERFORMANCE CHARACTERISTICS 61 Max press at design temp At 62 Min working temp Max 63 Diff press accuracy rating 64 Press accuracy rating 65 Temp accuracy rating 66 Diff press LRL URL 67 Press Lower Range-limit URL 68 Fill fluid sp gr At temp 69 Min ambient working temp Max 70 71 72 73 74 75 76 77 78 79 80 81 82 83 ACCESSORIES 84 Remote indicator style 85 Heating kit style 86 Manifold valve style 87 Manifold material 88 89 90 SPECIAL REQUIREMENTS 91 Custom tag 92 Reference specification 93 Special preparation 94 Compliance standard 95 Calibration report 96 Software configuration 97 98 99 100 PHYSICAL DATA 101 Estimated weight 102 Overall height 103 Removal clearance 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Flow rate-Analog output Flow rate-Scale Diff Press-Digital output Press-Digital output Temp-Digital output Flow rate-Digital output COMPONENT IDENTIFICATIONS COMPONENT TYPE MANUFACTURER

Date

Revision Description

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20F2051 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

PADDLE FLOW SWITCH OR FLOWMETER Device Specification

BODY OR STEM FITTING Body/Fitting type Process conn nominal size Rating Process conn termn type Style Seal type Extension/Heat insulator Body/Fitting material Bellow/Flexure tube matl Flange material Seal/O ring material          SENSING ELEMENT Sensor type Sensor style Paddle nominal size Integral cable length Mounting orientation Paddle/Plate material

SWITCH OR TRANSMITTER Housing type Element style Output signal type Enclosure type no/class Setpoint adjustment type Signal power source Damping/Time delay style Contacts arrangement Quantity Integral indicator style Signal termination type Cert/Approval type Enclosure material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Flow setpoint 1-Output Flow setpoint 2-Output Flow setpoint 3-Output Flow setpoint 4-Output Flow setpoint 5-Output Flow setpoint 6-Output Flow rate-Scale Flow rate- Analog output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

59 PERFORMANCE CHARACTERISTICS 60 Max press at design temp At 61 Min working temperature Max 62 Accuracy rating Ref 63 Repeatability Ref 64 Incr flow adjustable LRL URL 65 Decr flow adjustable LRL URL 66 Flow rate LRL URL 67 Maximum pressure drop 68 Min ambient working temp Max 69 Contacts ac rating At max 70 Contacts dc rating At max 71 72 73 74 75 76 77 78 79 80 81 82 83 ACCESSORIES 84 Mating connector 85 Remote relay 86 87 88 89 SPECIAL REQUIREMENTS 90 Custom tag    91 Reference specification 92 Compliance standard 93 Service design 94 95 96 97 PHYSICAL DATA 98 Estimated weight 99 Face-to-face dimension 100 Overall height 101 Removal clearance 102 Signal conn nominal size Style 103 Mfr reference dwg 104 105 106 INPUT OR SETPOINT OUTPUT LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

MANUFACTURER

Revision Description

By

Appv1 Appv2

MODEL NUMBER

Appv3

Form: 20F2061 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

REMARKS

© 2005 ISA

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21  22 23 24 25 26 27 28 29  30 31 32 33 34 35 36 37 38 39 40 41  42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 Rev

PITOT TUBE w/wo INSERTION ASSEMBLY Device Specification

BODY OR MOUNTING ASSEMBLY Body/Assembly type Sensor end support style Process conn nominal size Rating Process conn termn type Style End support conn nom size Style Pipe spool schedule Mounting fitting type Body/Assembly material Packing material Mounting fitting matl

SENSING ELEMENT Sensor type Nominal line size Sensor nominal size Temperature element type Sensor material

CONNECTION HEAD AND VALVES Connection head type Connection head style Process conn nominal size Rating Process conn termn type Style Press conn nominal size Style Pressure tap orientation Head orientation Connection valve style Head material Flange material Connection valve matl

INSERTION ASSEMBLY Insertion assembly type Isolation valve style Process conn nominal size Rating Process conn termn type Style Valve nom press rating Valve body material Valve seat material Wetted material Packing material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Flow rate-Diff pressure Test pressure

COMPONENT TYPE

Date

Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 PERFORMANCE CHARACTERISTICS 61 Max press at design temp At 62 Min working temperature Max 63 Uncalibrated accuracy 64 Temp accuracy rating 65 Flow repeatability 66 Min Reynolds number 67 Rated flow coefficient K 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 ACCESSORIES 84 Manifold valve style 85 Manifold valve material 86 87 88 89 90 SPECIAL REQUIREMENTS 91 Custom tag 92 Reference specification 93 Special preparation 94 Compliance standard 95 Construction code 96 Calibration report 97 Special inspections 98 99 100 PHYSICAL DATA 101 Estimated weight 102 Face-to-face dimension 103 Overall height 104 Removal clearance 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT LRV URV LRV URV

Appv1 Appv2 Appv3

Form: 20F2071 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

MODEL NUMBER

REMARKS

© 2004 ISA

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

SEGMENTAL WEDGE FLOW ELEMENT Device Specification

BODY OR TUBE Body/Tube type End conn nominal size End conn termn type Pipe schedule no Pressure tap quantity Press tap conn nom size Press tap conn termn type Temp tap conn nom size Temp tap conn termn type Tube material Flange material Gasket material

Rating Style

Rating Style Rating Style

INTERNAL COMPONENTS Element type H/D ratio Wedge restriction matl

CALIBRATIONS AND TEST TAG NUMBER MEAS/SIGNAL/TEST Flow rate – Diff pressure Test pressure

COMPONENT TYPE

Date

Revision Description

Copyright International of Automation Form:Society 20F2081 Rev 0 Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

60 PERFORMANCE CHARACTERISTICS 61 Max press at design temp At 62 Min working temperature Max 63 Uncalibrated accuracy Ref 64 Calibrated accuracy Ref 65 Repeatability Ref 66 Rated flow coefficient 67 Perm head loss at URL 68 69 70 71 72 73 74 75 76 77 78 79 80 81 ACCESSORIES 82 Mounting hardware 83 Manifold valve 84 Isolation valve 85 Impulse line material 86 87 88 89 SPECIAL REQUIREMENTS 90 Custom tag 91 Reference specification 92 Compliance standard 93 Construction code 94 Calibration report 95 Material certificate 96 Special inspection 97 Hydro static testing 98 99 100 101 PHYSICAL DATA 102 Estimated weight 103 Overall length 104 Overall height 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT LRV URV LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2007 ISA Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

V-SHAPED CONE FLOWMETER Device Specification

BODY OR TUBE Body/Tube type End conn nominal size Rating End conn termn type Style Flange facing finish Pipe schedule no Press tap conn nom size Rating Press tap conn termn type Style Tube material External treatment Flange material O ring material

SENSING ELEMENT Element type Beta ratio Cone and support matl

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Flow rate – Diff pressure Test pressure

COMPONENT TYPE

Date

Revision Description

Copyright International of Automation Form:Society 20F2101 Rev 0 Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

60 PERFORMANCE CHARACTERISTICS 61 Max press at design temp At 62 Min working temperature Max 63 Uncalibrated accuracy Ref 64 Calibrated accuracy Ref 65 Repeatability Ref 66 Rated flow coefficient 67 Perm head loss at URL 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 ACCESSORIES 85 Mounting hardware 86 Manifold valve 87 88 89 90 SPECIAL REQUIREMENTS 91 Custom tag 92 Reference specification 93 Conformance standard 94 Construction code 95 Calibration report 96 Material certificate 97 Special inspection 98 99 100 101 PHYSICAL DATA 102 Estimated weight 103 Overall length 104 Overall height 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT LRV URV LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2007 ISA Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

VENTURI OR FLOW TUBE w/wo METER TUBE Device Specification

BODY OR TUBE Tube form Fabrication style Inlet conn nominal size Outlet conn nominal size End conn termn type Flange facing finish Pressure tap quantity Press tap conn nom size Press tap conn type Press tap orientation Body/Tube material Bolting material Exterior coating material End termination material Gasket material

Rating Rating Style

Rating Style

THROAT Mounting type Diameter ratio (beta d/D) Throat diameter Cone material Throat material

METER TUBE Bore type End conn nominal size End conn termn type Flange facing finish Upstream length Pipe schedule no Downstream length Coupling quantity Coupling nominal size Coupling locations Internal bore diameter Flow straightener type Pipe/Tube material Bolting material Exterior coating material End termination material Gasket material

Rating Style

Rating

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Flow rate – Diff pressure Test pressure

COMPONENT TYPE

Date

Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 PERFORMANCE CHARACTERISTICS 61 Max press at design temp At 62 Min working temperature Max 63 Uncalibrated accuracy 64 Perm head loss at URL 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 ACCESSORIES 86 Purge system 87 Cleaner style 88 Valve style 89 Valves and Nipple matl 90 91 92 SPECIAL REQUIREMENTS 93 Custom tag 94 Reference specification 95 Special preparation 96 Compliance standard 97 Construction code 98 Calibration report 99 Weld radiographs 100 101 PHYSICAL DATA 102 Estimated weight 103 Face-to-face dimension 104 Removal clearance 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT LRV URV LRV URV

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20F2111 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

MAGNETIC FLOWMETER w/wo INTEGRAL TOTALIZER INDICATOR Device Specification

FLOWMETER BODY Body type Flow tube style End conn nominal size Rating End conn termn type Style Flow tube diameter Thickness Hardware mounting kit Flow tube material Lining material End termination material Gnd/protective ring matl

END EXTENSIONS End termination type Bolting material End termination material Gasket/O ring material

Style

SENSING ELEMENT Electrode type Insertion length Electrode material COILS AND HOUSING Housing construction type Coil conn arrangement Enclosure type no/class Signal power source Signal termination type Cert/Approval type Housing material

TRANSMITTER OR CONVERTER Housing type Output signal type Enclosure type no/class Characteristic curve Digital communication std Signal power source Failsafe style Integral indicator style Signal termination type Cert/Approval type Mounting location/type Failure/Diagnostic action Enclosure material CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Flow rate-Analog output Flow rate-Digital output Flow rate-Freq output Flow rate-Scale Test pressure

COMPONENT TYPE

Date

6 7 8 9 10

60 TOTALIZER INDICATOR 61 Totalizer type 62 Enclosure type no/class 63 Signal power source 64 Contacts arrangement Quantity 65 Totalizer reset style 66 Integral indicator style 67 Cert/Approval type 68 Mounting location/type 69 Enclosure material 70 71 PERFORMANCE CHARACTERISTICS 72 Min press at design temp At 73 Max press at design temp 74 Min working temperature Max 75 Accuracy rating 76 Min velocity URL Max 77 Min liquid conductivity 78 Output signal damping LRL URL 79 Min ambient working temp Max 80 Contacts ac rating At max 81 Contacts dc rating At max 82 Max sensor to receiver lg 83 84 85 86 ACCESSORIES 87 Connecting cables length 88 Cable Glands 89 Ultrasonic cleaner style 90 Empty tube detector 91 Calibrator adaptor 92 Calibrator/configurator 93 94 SPECIAL REQUIREMENTS 95 Custom tag 96 Reference specification 97 Compliance standard 98 Calibration report 99 Software configuration 100 101 PHYSICAL DATA 102 Estimated weight 103 Face-to-face dimension 104 Overall height 105 Removal clearance 106 Signal conn nominal size Style 107 Mfr reference dwg 108 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

Revision Description

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20F2321Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

ULTRASONIC FLOWMETER w/wo SWITCHES Device Specification

PRIMARY HEAD OR TUBE Primary head/Tube type End conn nominal size Rating End conn termn type Style Transducer conn type Head/Tube material Flange material Gasket/O ring material

TRANSDUCER Measurement type Beam/Sound track style Nominal range size Temperature LRL Mounting hardware Housing material

URL

CONNECTION HEAD Housing type Enclosure type no/class Signal conn termn style Cert/Approval type Enclosure material LEAD WIRE AND EXTENSION Extension type Cable length Min cable operating temp Max Signal termination type Cable jacket material

TRANSMITTER OR TOTALIZER w/wo SWITCHES Configuration type Aux input signal type Output signal type Enclosure type no/class Local operator interface Digital communication std Signal power source Measurement type Contacts arrangement Quantity Integral indicator style Signal termination type CALIBRATIONS AND TEST TAG NO/FUNCTIONAL MEAS/SIGNAL/SCAL Meas-Analog output 1 Meas-Analog output 2 Meas-Analog output 3 Meas-Analog output 4 Meas-Scale 1 Meas-Scale 2 Meas setpoint 1Meas setpoint 2Meas setpoint 3Meas setpoint 4Failure signal-Output

6 SPECIFICATION IDENTIFICATIONS 7 Document no 8 Latest revision Date 9 Issue status 10 TRANSMITTER OR TOTALIZER w/wo SWITCHES Continued Cert/Approval type Mounting location/type Failure/Diagnostic action Calibration mode Data logger points Measurement compensation Enclosure material

56 57 58 59 60 61 62 63 64 65 66 PERFORMANCE CHARACTERISTICS 67 Max press at design temp At 68 Min working temperature Max 69 Flow accuracy rating Ref 70 Min flow/Velocity URL Max 71 Minimum gas content Max 72 Minimum solids content Max 73 Min ambient working temp Max 74 Contacts ac rating At max 75 Contacts dc rating At max 76 Max sensor to receiver lg 77 78 79 ACCESSORIES 80 Acoustic coupling matl 81 Sound velocity sensor 82 Wall thickness sensor 83 Mounting kit 84 Tools 85 86 SPECIAL REQUIREMENTS 87 Custom tag 88 Reference specification 89 Compliance standard 90 Certificates 91 Software configuration 92 93 PHYSICAL DATA 94 Estimated weight 95 Face-to-face dimension 96 Overall height 97 Removal clearance 98 Signal conn nominal size Style 99 Mfr reference dwg 100 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

Revision Description

MANUFACTURER

By

Appv1 Appv2

MODEL NUMBER

Appv3

REMARKS

Form: 20F2341 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

© 2004 ISA

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Rev

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

THERMAL MASS FLOWMETER w/wo SWITCHES Device Specification

BODY OR FITTING Body/Fitting type Process conn nominal size Rating Process conn termn type Style Packing gland nom rating Mounting orientation Flow straightener type Body/Fitting material Flange material Compression ferrule matl

SENSING ELEMENT Sensor type Temperature LRL URL Minimum flow span Max Qty sensors per element Extension/Support dia Max/Fixed insertion lg Wetted material Extension/Support matl

LEAD WIRE AND EXTENSION Extension type Cable length Max cable operating temp Signal termination type Cable jacket material CONNECTION HEAD Housing type Enclosure type no/class Mounting location/type Enclosure material TRANSMITTER w/wo SWITCHES Housing type Aux input signal type Output signal type Enclosure type no/class Local operator interface Digital communication std Signal power source Qty of input sensors Contacts arrangement Quantity CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Flow-Analog output 1 Flow-Analog output 2 Flow-Analog output 3 Flow-Analog output 4 Flow-Scale Temperature-Scale Temp-Analog output Flow-Digital output Flow setpoint 1-Output Flow setpoint 2-Output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

57 TRANSMITTER w/wo SWITCHES Continued 58 Integral indicator style 59 Readout variables 60 Readout units 61 Signal termination type 62 Cert/Approval type 63 Mounting location/type 64 Failure/Diagnostic action 65 Calibration mode 66 Measurement compensation 67 Enclosure material 68 69 PERFORMANCE CHARACTERISTICS 70 Max press at design temp At 71 Min working temperature Max 72 Flow rate accuracy 73 Temperature accuracy 74 Flow repeatability 75 Max flow response time 76 Min ambient working temp Max 77 Contacts ac rating At max 78 Contacts dc rating At max 79 Max sensor to receiver lg 80 81 ACCESSORIES 82 Sensor cleaning system 83 Flow straightener 84 Enclosure heating kit 85 Calibrator/Configurator 86 87 SPECIAL REQUIREMENTS 88 Custom tag 89 Reference specification 90 Special preparation 91 Compliance standard 92 Calibration report 93 Software configuration 94 95 PHYSICAL DATA 96 Estimated weight 97 Face-to-face dimension 98 Overall height 99 Removal clearance 100 Signal conn nominal size Style 101 Mfr reference dwg 102 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE --`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 Rev

Date

MANUFACTURER

Revision Description

By

MODEL NUMBER

Appv1 Appv2 Appv3

Form: 20F2351 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

REMARKS

© 2004 ISA

Not for Resale

RESPONSIBLE ORGANIZATION

THERMAL MASS FLOW SWITCH Device Specification

BODY OR FITTING Body/Fitting type Process conn nominal size Rating Process conn termn type Style Packing gland nom rating Mounting orientation Body/Fitting material Flange material Compression ferrule matl

SENSING ELEMENT Sensor type Temperature LRL Flow Lower Range-Limit Heater power rating Max/Fixed insertion lg Wetted material

URL URL

LEAD WIRE AND EXTENSION Extension type Cable length Max cable operating temp Signal termination type Cable jacket material CONNECTION HEAD Housing type Enclosure type no/class Mounting location/type Enclosure material SWITCH MECHANISM Housing type Output signal type Enclosure type no/class Signal power source Contacts arrangement Quantity Integral indicator style Signal termination type Cert/Approval type Mounting location/type Failure/Diagnostic action Calibration mode Measurement compensation Enclosure material --`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Flow setpoint 1-Output Flow setpoint 2-Output Temp setpoint-Output Temp-Analog output Flow-Analog output

COMPONENT TYPE

Date

Revision Description

6 7 8 9 10

60 PERFORMANCE CHARACTERISTICS 61 Max press at design temp At 62 Min working temperature Max 63 Flow rate accuracy 64 Temperature accuracy 65 Flow repeatability 66 Max flow response time 67 Min ambient working temp Max 68 Contacts ac rating At max 69 Contacts dc rating At max 70 Max sensor to receiver lg 71 72 73 74 75 76 77 78 79 80 81 82 83 ACCESSORIES 84 Remote relay 85 Flow straightener 86 Enclosure heating kit 87 88 89 90 SPECIAL REQUIREMENTS 91 Custom tag 92 Reference specification 93 Special preparation 94 Compliance standard 95 Calibration report 96 97 98 99 PHYSICAL DATA 100 Estimated weight 101 Face-to-face dimension 102 Overall height 103 Removal clearance 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

Form: 20F2361 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

© 2004 ISA

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

VORTEX OR SWIRL FLOWMETER w/wo TOTALIZER INDICATOR Device Specification

FLOWMETER BODY Body type End conn nominal size Rating End conn termn type Style Seal type Mounting hardware Body wetted material End termination material Gasket/Seal material

SENSING ELEMENT Sensor type Sensor wetted material Fill fluid material

CONNECTION HEAD Housing type Enclosure type no/class Signal termination type Cert/Approval type Enclosure material

TRANSMITTER OR COMPUTER Housing type Measurement compensation Output signal type Enclosure type no/class Span-zero adjustment Characteristic curve Digital communication std Signal power source Failsafe style Integral indicator style Signal termination type Cert/Approval type Mounting location/type Calibration type Failure/Diagnostic action Enclosure material

6 7 8 9 10

58 TOTALIZER INDICATOR 59 Totalizer type 60 Enclosure type no/class 61 Signal power source 62 Contacts arrangement Quantity 63 Totalizer reset style 64 Integral indicator style 65 Cert/Approval type 66 Mounting location/type 67 Enclosure material 68 69 PERFORMANCE CHARACTERISTICS 70 Max press at design temp At 71 Min working temperature Max 72 Flow rate accuracy rating 73 Density accuracy rating 74 Min velocity URL Max 75 Density LRL URL 76 Min reqd back press 77 Pressure drop at flow URL 78 Min ambient working temp Max 79 Contacts ac rating At max 80 Contacts dc rating At max 81 Max sensor to receiver lg 82 83 ACCESSORIES 84 Connecting cables length 85 Isolation manifold 86 Remote indicator style 87 Calibrator adapter 88 89 SPECIAL REQUIREMENTS 90 Custom tag 91 Reference specification 92 Special preparation 93 Compliance standard 94 Calibration report 95 Software configuration 96 97 PHYSICAL DATA 98 Estimated weight 99 Face-to-face dimension 100 Overall height 101 Removal clearance 102 Signal conn nominal size Style 103 Mfr reference dwg 104 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Flow rate-Analog output Mass flow-Analog output Meas-Analog output Meas-Freq output 1 Meas-Freq output 2 Measurement-Scale Temp-Digital output Meas-Digital output Density-Digital output Test pressure COMPONENT IDENTIFICATIONS COMPONENT TYPE MANUFACTURER

Date

Revision Description

By

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20F2381 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 Rev

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

SONAR FLOWMETER w/wo ENTRAINED GAS MONITOR Device Specification

SENSOR HEAD COVER Head/Tube cover type Cover style Pipe/Tube nominal size Head cover material Gasket/Seal material

SENSING ELEMENT Measurement type Sensor style Band type Band material

CONNECTION HEAD OR PREAMPLIFIER Configuration type Output signal type Enclosure type no/class Signal conn termn style Cert/Approval type LEAD WIRE AND EXTENSION Extension type Cable length Min cable operating temp Max Signal termination type Cert/Approval type Cable jacket material TRANSMITTER OR TOTALIZER w/wo SWITCHES Configuration type Aux input signal type Output signal type Enclosure type no/class Local operator interface Digital communication std Signal power source Contacts arrangement Quantity Integral indicator style Signal termination type Cert/Approval type Mounting location/type Failure/Diagnostic action Memory interface CALIBRATIONS AND TEST TAG NO/FUNCTIONAL MEAS/SIGNAL/SCAL Flow-Analog output 1 Total flow-Output 2 -Freq output -Digital output Flow-Scale 1 Total flow-Scale 2 Flow setpoint-Output Failure signal-Output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

56 TRANSMITTER OR TOTALIZER w/wo SWITCHES Continued 57 Data logger points 58 Measurement compensation 59 Enclosure material 60 61 62 63 PERFORMANCE CHARACTERISTICS 64 Min working temperature Max 65 Flow accuracy rating Ref 66 Entrained Air/gas accuracy Ref 67 Flow repeatability Ref 68 Min flow/velocity URL Max 69 Entrained Air/gas LRL URL 70 Update rate 71 Min ambient working temp Max 72 Contacts dc rating At max 73 Max sensor to receiver lg 74 75 76 77 ACCESSORIES 78 Mounting hardware 79 Thermal blanket 80 81 82 83 SPECIAL REQUIREMENTS 84 Custom tag 85 Reference specification 86 Calibration report 87 Software configuration 88 89 90 91 PHYSICAL DATA 92 Estimated weight 93 Overall length 94 Removal clearance 95 Outside diameter 96 Signal conn nominal size Style 97 Mfr reference dwg 98 99 100 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Rev

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

Revision Description

MANUFACTURER

By

Appv1 Appv2

MODEL NUMBER

Appv3

REMARKS

Form: 20F2391 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

--`,,```,,,,````-`-`,,`,,`,`,,`---

Not for Resale

© 2007 ISA

RESPONSIBLE ORGANIZATION POSITIVE DISPLACEMENT FLOWMETER DIRECT-READING TYPE Device Specification

Project number Project Enterprise Site Area Related equipment Service

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29  30  31  32  33  34  35  36  37  38  39  40  41  42  43 44  45  46  47  48  49  50  51  52  53  54 55  56  57  58  59  60  61  62  63  117 118 119  120  121  122  123 124 125  126  127  128  Rev

OPERATING PARAMETERS Sub project no

Cell

Unit

P&ID/Reference dwg number Upstr line/nozzle number Upstream line pipe spec Upstr line nominal size Rating Upstr line conn type Style Upstr line material type Inline hazardous area cl Div/Zone Group Inline area min ign temp   Temp ident number Minimum inlet pressure Maximum inlet pressure Minimum temperature Maximum temperature Min liquid std flow rate Max liquid std flow rate Minimum liquid viscosity Maximum liquid viscosity Max pressure differential Material name Matl density at ref temp At Reactivity NFPA health hazard  Flammability           FLOWMETER BODY Body/Housing type Inlet conn nominal size Rating Outlet conn nominal size Rating End conn termn type Style Flow direction/Mounting Body/Housing material Cap/End cover material Seal/O ring material       MEASURING CHAMBER Displacement element type Construction style Nominal meter size Sensor style Displacement element matl Measuring chamber matl Bearing/Bushing matl Shaft material CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Volume-Accum total scale Volume-Totalized scale Flow rate-Scale

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

64 DRIVE TRAIN AND ADJUSTER 65 Drive type 66 Accuracy adjuster type 67 Temp compensation type 68 69 70 REGISTER OR TOTALIZER 71 Register/Totalizer type 72 Enclosure type no/class 73 Signal power source 74 Totalizer reset style 75 Integral indicator style 76 Cert/Approval type 77 Mounting location/type 78 Enclosure material 79 80 81 PERFORMANCE CHARACTERISTICS 82 Max press at design temp At 83 Min working temperature Max 84 Max viscosity limit 85 Accuracy rating Ref 86 Repeatability Ref 87 Flow rate LRL URL 88 Recommended filter size 89 Pressure drop at URL 90 Min ambient working temp Max 91 Max sensor to receiver lg 92 93 94 ACCESSORIES 95 Strainer 96 Air/Vapor eliminator 97 98 99 SPECIAL REQUIREMENTS 100 Custom tag 101 Reference specification 102 Compliance standard 103 Calibration report 104 Material certificate 105 Service design 106 107 108 PHYSICAL DATA 109 Estimated weight 110 Face-to-face dimension 111 Overall height 112 Removal clearance 113 Signal conn nominal size Style 114 Mfr reference dwg 115 116 INPUT OR TEST SCALE LRV URV LRV URV FACTOR

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

MANUFACTURER

Revision Description

      Form: 20F2411 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

   

   

By        

Appv1 Appv2        

MODEL NUMBER

Appv3

REMARKS

© 2005 ISA

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 RESPONSIBLE ORGANIZATION POSITIVE DISPLACEMENT FLOWMETER 6 SPECIFICATION IDENTIFICATIONS 2 w TRANSMITTER OR ACCESSORIES 7 Document no 3 Device Specification 8 Latest revision Date 4 9 Issue status 5 10 11 FLOWMETER BODY 58 PERFORMANCE CHARACTERISTICS 12 Body/Housing type 59 Max press at design temp At 13 Inlet conn nominal size Rating 60 Min working temperature Max 14 Outlet conn nominal size Rating 61 Max viscosity limit 15 End conn termn type Style 62 Accuracy rating Ref 16 Flow direction/Mounting 63 Repeatability Ref 17  Body/Housing material 64 Flow rate LRL URL 18  Cap/End cover material 65 Meter mean K-factor 19  Seal/O ring material 66 Recommended filter size 20  67 Pressure drop at URL 21  68 Min ambient working temp Max 22 MEASURING CHAMBER 69 Contact ac rating At max 23  Displacement element type 70 Contact dc rating At max 24  Construction style 71 Max sensor to receiver lg 25  Nominal meter size 72 26  Sensor style 73 27  Displacement element matl 74 28  Measuring chamber matl 75 ACCESSORIES 29  Bearing/Bushing matl 76 Strainer 30  Shaft material 77 Strainer mesh size 31  78 Valve style 32  79 Lubrication system 33 DRIVE TRAIN AND ADJUSTER 80 Air/Vapor eliminator 34  Drive type 81 End connection adapter 35  Accuracy adjuster type 82 36  Temp compensation type 83 37  84 38  85 SPECIAL REQUIREMENTS 39 TRANSMITTER OR TOTALIZER w/wo SWITCHES 86 Custom tag 40  Configuration type 87 Reference specification 41  Aux input signal type 88 Compliance standard 42  Output signal type 89 Calibration report 43  Enclosure type no/class 90 Material certificate 44  Control mode 91 Service design 45  Digital communication std 92 46  Signal power source 93 47  Totalizer reset style 94 48  Contacts arrangement Quantity 95 PHYSICAL DATA 49  Pulse per revolution 96 Estimated weight 50  Integral indicator style 97 Face-to-face dimension 51  Signal termination type 98 Overall height 52  Cert/Approval type 99 Removal clearance 53  Mounting location/type 100 Signal conn nominal size Style 54  Integral printer style 101 Mfr reference dwg 55  Enclosure material 102 56  103 57  104 110 CALIBRATIONS AND TEST INPUT OR TEST OUTPUT OR SCALE 111  TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE LRV URV ACTION LRV URV 112  Meas-Analog output 1 113  Meas-Analog output 2 114  Volume-Accum total scale 115  Volume-Totalized scale 116  Flow rate-Scale 117  Meas setpoint 1-Output 118  Meas setpoint 2-Output 119  Failure signal-Output 120  121 COMPONENT IDENTIFICATIONS 122  COMPONENT TYPE MANUFACTURER MODEL NUMBER 123  124  125  126  127  Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS                                 Form: 20F2421 Rev 0 © 2005 ISA --`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

CORIOLIS MASS FLOWMETER w/wo TOTALIZER INDICATOR Device Specification

FLOWMETER BODY AND HOUSING Body/Housing type End conn nominal size Rating End conn termn type Style Body wetted material Housing material End termination material

FLOWTUBE ASSEMBLY Flowtube type Flowtube diameter Flowtube material

CONNECTION HEAD Housing type Enclosure type no/class Signal termination type Cert/Approval type Housing material

TRANSMITTER OR COMPUTER Housing type Measurement compensation Output signal type Enclosure type no/class Span-zero adjustment Characteristic curve Digital communication std Signal power source Failsafe style Integral indicator style Signal termination type Cert/Approval type Mounting location/type Failure/Diagnostic action Enclosure material

6 7 8 9 10

58 TOTALIZER INDICATOR 59 Totalizer type 60 Enclosure type no/class 61 Signal power source 62 Contacts arrangement Quantity 63 Totalizer reset style 64 Integral indicator style 65 Cert/Approval type 66 Mounting location/type 67 Enclosure material 68 69 PERFORMANCE CHARACTERISTICS 70 Max press at design temp At 71 Min working temperature Max 72 Flow rate accuracy rating 73 Density accuracy rating 74 Min flow URL Max 75 Density LRL URL 76 Sec enclosure press rating 77 Pressure drop at flow URL 78 Min ambient working temp Max 79 Contacts ac rating At max 80 Contacts dc rating At max 81 Max sensor to receiver lg 82 83 ACCESSORIES 84 Connecting cables length 85 Heating kit style 86 Calibrator/configurator 87 88 89 SPECIAL REQUIREMENTS 90 Custom tag 91 Reference specification 92 Special preparation 93 Compliance standard 94 Calibration report 95 Software configuration 96 97 PHYSICAL DATA 98 Estimated weight 99 Face-to-face dimension 100 Overall height 101 Removal clearance 102 Signal conn nominal size Style 103 Mfr reference dwg 104 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Mass flow-Analog output Meas-Analog output 2 Meas-Analog output 3 Meas-Freq output 1 Meas-Freq output 2 Measurement–Scale Temp-Digital output Meas-Digital output Density-Digital output Test pressure COMPONENT IDENTIFICATIONS COMPONENT TYPE MANUFACTURER

Date

Revision Description

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form 20F2521 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 Rev

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 RESPONSIBLE ORGANIZATION SIGHT FLOW INDICATOR 6 SPECIFICATION IDENTIFICATIONS 2 w/wo ILLUMINATOR 7 Document no 3 Device Specification 8 Latest revision Date 4 9 Issue status 5 10 11 OPERATING PARAMETERS 62 GAUGE ILLUMINATOR 12 Project number Sub project no 63 Illumination type 13 Project 64 Enclosure type no/class 14 Enterprise 65 Power source 15 Site 66 Cert/Approval type 16 Area Cell Unit 67 Enclosure material 17 Related equipment 68 18 Service 69 19 70 PERFORMANCE CHARACTERISTICS 20 P&ID/Reference dwg 71 Max press at design temp At 21 Upstr line/nozzle number 72 Min working temperature Max 22 Upstream line pipe spec 73 Min flow for indication 23 Upstr conn nominal size Rating 74 24 Upstr line conn type Style 75 25 Upstr conn orientation 76 26 Upstr line material type 77 27 Inline hazardous area cl Div/Zone Group 78 28 Inline area min ign temp Temp ident number 79 29 Minimum pressure 80 30 Maximum pressure 81 31 Minimum temperature 82 32 Maximum temperature 83 33 Material phase 84 34 Material name 85 35 Material color 86 36  NFPA health hazard Flammability Reactivity 87 37  88 38  89 39  90 40  SIGHT FLOW INDICATOR 91 41 Body type 92 42  Window style 93 SPECIAL REQUIREMENTS 43  End conn nominal size Rating 94 Custom tag 44  End conn termn type Style 95 Reference specification 45  End-to-end length std 96 Compliance standard 46  Indicator type 97 Construction code 47  Cover/Retainer style 98 Cert/Approval type 48  Extended overall length 99 Service design 49  Flow direction style 100 50  Body/End fitting matl 101 51  Lens/Cylinder material 102 52  Lining material 103 PHYSICAL DATA 53  Bolting material 104 Estimated weight 54  Cover/Retainer material 105 Overall length 55  Shield/Protective matl 106 Overall height 56  Flange/End conn material 107 Overall width 57  Gasket/Seal/Packing matl 108 Sight opening diameter 58  Lens cushion material 109 Mfr reference dwg 59  Indicator material 110 60  111 61  112 113 CALIBRATIONS AND TEST TEST 114 TAG NUMBER TEST URV 115  Test pressure 116 117 118 119 COMPONENT IDENTIFICATIONS 120 COMPONENT TYPE MANUFACTURER MODEL NUMBER 121            122            123            124            125            126            Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS                                                                     Form: 20F2611 Rev 0 © 2004 ISA

CAPACITANCE OR RF ADMITTANCE LEVEL TRANSMITTER w/wo SWITCHES Device Specification

PROCESS CONNECTION Body/Fitting type Process conn nominal size Rating Process conn termn type Style Wetted material Flange material Seal/O ring material

SENSING ELEMENT Configuration type Probe diameter Insertion length Inactive length Integral cable length Probe material Insulation/Sheath matl Weight material

CONNECTION HEAD OR PREAMPLIFIER Type Measurement compensation Input signal URL Output signal type Enclosure type no/class Power source Cert/Approval type Mounting location/type Enclosure material

TRANSMITTER w/wo SWITCHES Housing type Measurement compensation Output signal type Input signal URL Enclosure type no/class Characteristic curve Signal power source Contact arrangement Quantity Failsafe style RFI protection Integral indicator style Cert/Approval type Mounting location/type Static discharge prot Failure/Diagnostic action Adjustable signal damping CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Level-Analog output Level-Scale Level setpoint 1-Output Level setpoint 2-Output Level setpoint 3-Output

COMPONENT TYPE

Date

Revision Description

6 SPECIFICATION IDENTIFICATIONS 7 Document no 8 Latest revision Date 9 Issue status 10 TRANSMITTER w/wo SWITCHES continued Switch time delay Enclosure material

60 61 62 63 64 65 66 PERFORMANCE CHARACTERISTICS 67 Max press at design temp At 68 Min working temperature Max 69 Max discharge to sensor 70 Accuracy rating 71 Min measurement span Max 72 Min ambient working temp Max 73 Contacts ac rating At max 74 Contacts dc rating At max 75 Max sensor to receiver lg 76 77 78 79 80 81 82 83 84 ACCESSORIES 85 Connecting cables length 86 Power supply 87 Local indicator style 88 Intrinsic safety barrier 89 90 91 92 SPECIAL REQUIREMENTS 93 Custom tag 94 Reference specification 95 Compliance standard 96 Calibration report 97 98 99 100 PHYSICAL DATA 101 Estimated weight 102 Overall height 103 Removal clearance 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR SETPOINT OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20L2101 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Not for Resale

RESPONSIBLE ORGANIZATION

DIFFERENTIAL PRESSURE LEVEL TRANSMITTER - FLANGE MOUNTED Device Specification

TRANSMITTER BODY Body/Flange type Process conn nominal size Rating Process conn termn type Style Vent/Drain location Mounting type Body/Flange material Vent/Drain material Bolting material Flange adapter material Gasket/O ring material Mounting kit material

SENSING ELEMENT Detector type Min diff pressure span Diaphragm/Wetted material Fill fluid material

Max

TRANSMITTER Output signal type Enclosure type no/class Characteristic curve Digital communication std Signal power source Transient protection Integral indicator style Signal termination type Cert/Approval type Span-Zero adjust loc Failure/Diagnostic action Enclosure material

INTEGRAL SEAL Seal type Process conn nominal size Process conn termn type Diaphragm extension lg Diaphragm material Upper housing/Flange matl

Rating Style

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Diff press-Analog output Diff press-Scale Diff press-Digital output Press-Digital output Temp-Digital output

COMPONENT TYPE

Date

Revision Description

6 7 8 9 10

60 REMOTE SEAL 61 Seal type 62 Process conn nominal size Rating 63 Process conn termn type Style 64 Diaphragm extension lg 65 Instrument conn nom size 66 Flushing conn quantity 67 Capillary/Fitting dia Length 68 Diaphragm material 69 Capillary-armor material 70 Bolting material 71 Upper housing material 72 Lower housing/Flange matl 73 Gasket/Oring material 74 Fill fluid material 75 76 PERFORMANCE CHARACTERISTICS 77 Max press at design temp At 78 Min working temp Max 79 Accuracy rating 80 Diff pressure LRL URL 81 Fill fluid sp gr At temp 82 Ambient temperature error 83 Min ambient working temp Max 84 85 86 87 ACCESSORIES 88 Air set filter style 89 Air set gauges 90 Heating kit style 91 Remote indicator style 92 93 94 SPECIAL REQUIREMENTS 95 Custom tag 96 Reference specification 97 Special preparation 98 Compliance standard 99 Software configuration 100 101 PHYSICAL DATA 102 Estimated weight 103 Overall height 104 Removal clearance 105 Signal conn nominal size Style 106 Mfr reference dwg 107 108 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20L2111 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

1 2 3

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION DISPLACER-TYPE LEVEL TRANSMITTER OR LOCAL CONTROLLER Device Specification BODY OR CAGE Body/Cage type Process conn nominal size Process conn termn type Flange facing finish Lower conn location Gage glass conn nom size Gage glass conn type Vent/Drain conn nom size Vent/Drain termn type Head orientation/type Extension/Heat insulator Body/Cage material Bolting material Gasket/O ring material

Rating Style Upper Rating Style Rating Style

SENSING ELEMENT Sensor type Sp gr Lower Range-Limit URL Displacer diameter Length Extension length Displacer material Torque tube/Spring matl Extension/Cable material Trim material

CONNECTION HEAD Type Enclosure type no/class Signal termination type Cert/Approval type Enclosure material

6 7 8

9 Issue status 10 TRANSMITTER OR CONTROLLER continued Cert/Approval type Mounting location/type Span-Zero adjust lct Enclosure material

60 61 62 63 64 65 66 67 68 PERFORMANCE CHARACTERISTICS 69 Max press at design temp At 70 Min working temperature Max 71 Accuracy rating 72 Level Lower Range-Limit URL 73 Min level span Max 74 Min differential sp gr 75 Min ambient working temp Max 76 Contacts ac rating At max 77 Contacts dc rating At max 78 79 80 81 ACCESSORIES 82 Connecting cables length 83 Air set filter style 84 Air set gauges 85 Gage glass style 86 Gage valve style 87 88 89 SPECIAL REQUIREMENTS 90 Custom tag 91 Reference specification 92 Special preparation 93 Compliance standard 94 Construction code 95 Software configuration 96 97 98 PHYSICAL DATA 99 Estimated weight 100 Overall height 101 Removal clearance 102 Upper to lower conn lg 103 Lower to drain conn lg 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR SETPOINT OUTPUT OR SCALE LRV URV ACTION LRV URV

TRANSMITTER OR CONTROLLER w/wo SWITCHES Housing type Output signal type Enclosure type no/class Control mode Digital communication std Signal power source Contacts arrangement Quantity Transient protection Integral indicator style Signal termination type CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Level-Analog output Level-Digital output Level-Scale Level setpoint 1-Output Level setpoint 2-Output Test pressure COMPONENT IDENTIFICATIONS COMPONENT TYPE MANUFACTURER

Date

Revision Description

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20L2121 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

NUCLEAR RADIATION LEVEL TRANSMITTER w/wo SWITCHES Device Specification

RADIATION SOURCE Source type Number of sources Source size Fireproof design type Shutter style Position switch type Mounting location/type Collimation angle Source material Housing material

SENSING ELEMENT Detector type Detector style Number of detectors Active length

CONNECTION HEAD OR PREAMPLIFIER Type Housing type Measurement compensation Output signal type Enclosure type no/class Signal power source Cert/Approval type Mounting location/type Enclosure material

TRANSMITTER w/wo SWITCHES Housing type Measurement compensation Output signal type Enclosure type no/class Characteristic curve Digital communication std Signal power source Contact arrangement Quantity Failsafe style Integral indicator style Cert/Approval type Mounting location/type Failure/Diagnostic action Enclosure material

6 7 8 9 10

60 PERFORMANCE CHARACTERISTICS 61 Level accuracy rating 62 Density accuracy rating 63 Min measurement span Max 64 Response time 65 Min ambient working temp Max 66 Contacts ac rating At Max 67 Contacts dc rating At Max 68 Max sensor to receiver lg 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 ACCESSORIES 86 Connecting cables length 87 Mounting hardware 88 Calibrator 89 90 91 92 93 SPECIAL REQUIREMENTS 94 Custom tag 95 Reference specification 96 Compliance standard 97 98 99 100 PHYSICAL DATA 101 Estimated weight 102 Overall length 103 Removal clearance 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR SETPOINT OUTPUT OR SCALE LRV URV ACTION LRV URV

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Level-Analog output Level-Digital output Level-Scale Density-Digital output Level setpoint 1-Output Level setpoint 2-Output COMPONENT IDENTIFICATIONS COMPONENT TYPE MANUFACTURER

Date

Revision Description

By

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20L2141 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

--`,,```,,,,````-`-`,,`,,`,`,,`---

RESPONSIBLE ORGANIZATION

RESISTANCE-TAPE LEVEL TRANSMITTER w/wo SWITCHES Device Specification

PROCESS CONNECTION Body/Fitting type Process conn nominal size Rating Process conn termn type Style Shell/cap material Seal/O ring material

SENSING ELEMENT Detector type Temperature sensor qty Temperature coefficient Temp nominal resistance Sheath style Overall length Inactive length Sheath material Protector material

At

CONNECTION HEAD OR HOUSING Type Housing style Enclosure type no/class Signal termination type Cert/Approval type Mounting location/type Enclosure material Breather material Fitting material

TRANSMITTER w/wo SWITCHES Housing type Output signal type Enclosure type no/class Characteristic curve Signal power source Contacts arrangement Quantity Failsafe style Integral indicator style Cert/Approval type Mounting location/type Enclosure material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Level-Analog output Temp-Analog output Level-Scale Level setpoint 1-Output Level setpoint 2-Output

COMPONENT TYPE

Date

Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 PERFORMANCE CHARACTERISTICS 61 Max press at design temp At 62 Min working temperature Max 63 Repeatability 64 Min measurement span Max 65 Sensor resistance coef 66 Actuation depth 67 Min ambient working temp Max 68 Contacts ac rating At max 69 Contacts dc rating At max 70 Max sensor to receiver lg 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 ACCESSORIES 86 Connecting cables length 87 Local indicator style 88 Intrinsic safety barrier 89 90 91 92 93 SPECIAL REQUIREMENTS 94 Custom tag 95 Reference specification 96 Compliance standard 97 98 99 100 PHYSICAL DATA 101 Estimated weight 102 Overall height 103 Removal clearance 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR SETPOINT OUTPUT OR SCALE LRV URV ACTION LRV URV

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20L2151 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

NON-CONTACT ULTRASONIC LEVEL TRANSMITTER w/wo SWITCHES Device Specification

PROCESS CONNECTION Body/Fitting type Process conn nominal size Rating Process conn termn type Style Wetted material Flange material Seal/O ring material

SENSING ELEMENT Detector type Detector style Insertion length Integral cable length

CONNECTION HEAD Type Enclosure type no/class Cert/Approval type Mounting location/type Enclosure material

TRANSMITTER w/wo SWITCHES Housing type Measurement compensation Output signal type Enclosure type no/class Control sequence Characteristic curve Digital communication std Signal power source Contact arrangement Quantity Failsafe style Integral indicator style Cert/Approval type Mounting location/type Failure/Diagnostic action Signal processing Enclosure material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Level–Analog output Level-Scale Level setpoint 1-Output Level setpoint 2-Output Level setpoint 3-Output

COMPONENT TYPE

Date

Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 PERFORMANCE CHARACTERISTICS 61 Max press at design temp At 62 Min working temperature Max 63 Accuracy rating 64 Level lower range limit URL 65 Min measurement span Max 66 Beam angle 67 Min ambient working temp Max 68 Contacts ac rating At max 69 Contacts dc rating At max 70 Max sensor to receiver lg 71 72 73 74 75 76 77 78 79 80 81 82 83 84 ACCESSORIES 85 Connecting cables length 86 Enclosure heater 87 Mounting hardware 88 89 90 91 92 SPECIAL REQUIREMENTS 93 Custom tag 94 Reference specification 95 Compliance standard 96 Calibration report 97 98 99 100 PHYSICAL DATA 101 Estimated weight 102 Overall height 103 Removal clearance 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR SETPOINT OUTPUT OR SCALE LRV URV ACTION LRV URV

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20L2171 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

CAPACITANCE OR RF ADMITTANCE LEVEL SWITCH Device Specification

PROCESS CONNECTION Body/Fitting type Process conn nominal size Rating Process conn termn type Style Wetted material Flange material Seal/O ring material

SENSING ELEMENT Configuration type Number of elements Probe diameter Insertion length Inactive/Dead length Integral cable length Probe material Insulation/Sheath matl Weight material

CONNECTION HEAD OR PREAMPLIFIER Type Measurement compensation Input signal URL Output signal type Enclosure type no/class Signal power source Cert/Approval type Mounting location/type Enclosure material

SWITCH MECHANISM Housing type Element style Measurement compensation Output signal type Input signal LRL URL Enclosure type no/class Signal power source Dead band type Contacts arrangement Quantity Failsafe style Integral indicator style Cert/Approval type Mounting location/type Static discharge prot Failure/Diagnostic action CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Level setpoint 1-Output Level setpoint 2-Output Level setpoint 3-Output Level setpoint 4-Output

COMPONENT TYPE

Date

Revision Description

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

6 7 8 9 10

SWITCH MECHANISM continued RFI protection Switch time delay Enclosure material

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Max discharge to sensor Repeatability/Sensitivity Min measurement span Max Min ambient working temp Max Contacts ac rating At max Contacts dc rating At max Max sensor to receiver lg

ACCESSORIES Connecting cables length Mounting hardware External relay Intrinsic safety barrier

SPECIAL REQUIREMENTS Custom tag Reference specification Compliance standard

PHYSICAL DATA Estimated weight Overall height Removal clearance Signal conn nominal size Mfr reference dwg

SETPOINT LRV

ACTION

LRV

URV

MODEL NUMBER

Appv1 Appv2 Appv3

REMARKS

© 2001 ISA

Form: 20L2301 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Style

OUTPUT URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

FLOAT OR DISPLACER LEVEL SWITCH Device Specification

BODY OR CAGE Body/Cage type Process conn nominal size Process conn termn type Flange facing finish Lower conn location Gage glass conn nom size Try-cock conn nom size Head orientation/type Extension/Heat insulator Body/Cage material Bolting material Gasket material

Rating Style Upper Style Style

SENSING ELEMENT Sensor type Sp gr Lower Range-Limit URL Adjustable LRL URL Sensor quantity Float/Displacer dia Length Extension/stem length Float/Displacer material Torque tube/Spring matl Magnetic sleeve material Extension/Cable material Trim material

SWITCH MECHANISM Housing type Element style Output signal type Enclosure type no/class Control sequence Signal power source Contacts arrangement Signal termination type Cert/Approval type Dead band type Enclosure material Exterior coating material

Quantity

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Level setpoint 1-Output Level setpoint 2-Output Level setpoint 3-Output Level setpoint 4-Output

COMPONENT TYPE

Date

Revision Description

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

6 7 8 9 10

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Repeatability Level Lower Range-Limit URL Dead band rating Min ambient working temp Max Contacts ac rating At max Contacts dc rating At max

ACCESSORIES Try-cocks style Gage glass style Gage valve style Mechanical test mechanism

SPECIAL REQUIREMENTS Custom tag Reference specification Special preparation Compliance standard Construction code

PHYSICAL DATA Estimated weight Overall height Removal clearance Upper to lower conn lg Lower to drain conn lg Signal conn nominal size Mfr reference dwg

SETPOINT LRV

Appv1 Appv2 Appv3

Style

OUTPUT URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

ACTION

LRV

URV

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

© 2001 ISA

Form: 20L2311 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

RESPONSIBLE ORGANIZATION

TANK LEVEL GAUGE OR INDICATOR w/wo SWITCHES Device Specification

PROCESS CONNECTION Body/Fitting type Process conn nominal size Rating Process conn termn type Style Wetted material

SENSING ELEMENT Sensor type Nominal size Sensor material Guide cable material Bottom anchor material Top anchor material

TAPE CONDUIT Sheave elbow type Liquid seal style Tape material Sheave elbow material Pipe material Liquid seal sheave matl Tape wipe material Conduit vent fitting matl

GAUGE OR INDICATOR Type Spring Motor style Level URL Seal type Graduations and color Mounting location/type Sensor check style Housing material

SWITCH MECHANISM Housing type Output signal type Max level span Enclosure type no/class Signal power source Contact arrangement Quantity Failsafe style Integral indicator style Cert/Approval type CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Level-Scale Level setpoint 1-Output Level setpoint 2-Output Level setpoint 3-Output Level setpoint 4-Output

COMPONENT TYPE

Date

Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 SWITCH MECHANISM continued 61 Mounting location/type 62 Enclosure material 63 64 65 66 PERFORMANCE CHARACTERISTICS 67 Max press at design temp At 68 Min working temperature Max 69 Min specific gravity Max 70 Indication accuracy 71 Switch repeatability 72 Min differential sp gr 73 Min ambient working temp Max 74 Contacts ac rating At max 75 Contacts dc rating At max 76 77 78 79 80 81 82 83 84 85 86 ACCESSORIES 87 Calibrator 88 Condensate reservoir 89 Shock absorber 90 Isolation valve 91 92 93 SPECIAL REQUIREMENTS 94 Custom tag 95 Reference specification 96 Compliance standard 97 98 99 100 PHYSICAL DATA 101 Estimated weight 102 Overall height 103 Removal clearance 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR SETPOINT OUTPUT OR SCALE LRV URV ACTION LRV URV

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20L2312 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

NUCLEAR RADIATION LEVEL SWITCH Device Specification

RADIATION SOURCE Shutter type Number of sources Source size Fireproof design type Position switch type Mounting location/type Source material Housing material

SENSING ELEMENT Detector type Number of detectors Active length Check source actuation

CONNECTION HEAD OR PREAMPLIFIER Type Housing type Output signal type Enclosure type no/class Signal power source Cert/approval type Mounting location/type Enclosure material

SWITCH MECHANISM Housing type Output signal type Enclosure type no/class Signal power source Contacts arrangement Failsafe style Integral indicator style Cert/Approval type Mounting location/type Failure/Diagnostics action Enclosure material

Quantity

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Level setpoint 1-Output Level setpoint 2-Output Level setpoint 3-Output Level setpoint 4-Output

COMPONENT TYPE

Date

Revision Description

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

ACCESSORIES Connecting cables length Mounting hardware

SPECIAL REQUIREMENTS Custom tag Reference specification Compliance standard

PHYSICAL DATA Estimated weight Overall length Removal clearance Signal conn nominal size Mfr reference dwg

SETPOINT LRV

Appv1 Appv2 Appv3

Style

OUTPUT URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

PERFORMANCE CHARACTERISTICS Repeatability/Sensitivity Response time Min ambient working temp Max Contacts ac rating At max Contacts dc rating At max Max sensor to receiver lg

ACTION

LRV

URV

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20L2321 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

ULTRASONIC CONTACT-TYPE LEVEL SWITCH Device Specification

PROCESS CONNECTION Body/Fitting type Process conn nominal size Rating Process conn termn type Style Wetted material Flange/Fitting material Seal/O ring material

SENSING ELEMENT Configuration type Nominal temp rating Number of sensors Probe diameter Insertion length Integral cable length Self test type Cert/Approval type

CONNECTION HEAD OR PREAMPLIFIER Type Output signal type Enclosure type no/class Signal power source Gain type Cert/Approval type Mounting location/type Failure/Diagnostic action Enclosure material

SWITCH MECHANISM Housing type Element style Input signal type Output signal type Enclosure type no/class Control logic Gain type Signal power source Contacts arrangement Quantity Failsafe style Integral indicator style Cert/Approval type Mounting location/type Failure/Diagnostic action Switch time delay CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Lg conn to sp 1-Output Lg conn to sp 2-Output Lg conn to sp 3-Output Lg conn to sp 4-Output

COMPONENT TYPE

Date

Revision Description

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

6 7 8 9 10

SWITCH MECHANISM continued Enclosure material Exterior coating material

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Repeatability/Sensitivity Min ambient working temp Max Contacts ac rating At Max Contacts dc rating At Max Max sensor to receiver lg

ACCESSORIES Connecting cables length Mounting hardware External relay Intrinsic safety barrier

SPECIAL REQUIREMENTS Custom tag Reference specification Compliance standard

PHYSICAL DATA Estimated weight Overall height Removal clearance Signal conn nominal size Mfr reference dwg

SETPOINT LRV

Appv1 Appv2 Appv3

Style

OUTPUT URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

ACTION

LRV

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20L2351 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

URV

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

ROTARY LEVEL SWITCH

6 7 8 9 10

Device Specification

PROCESS CONNECTION Body type Process conn nominal size Rating Process conn termn type Style Wetted material Seal/O ring material

SENSING ELEMENT Sensor type Nominal size Shaft coupling type Shaft guard style Extension shaft length Sensor material Extension/Cable material Shaft material

SWITCH MECHANISM Housing type Motor style Output signal type Enclosure type no/class Signal power source Contacts arrangement Failsafe style Integral indicator style Cert/Approval type Failure/Diagnostic action Enclosure material

Quantity

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Level setpoint-Output

COMPONENT TYPE

Date

Revision Description

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Min material density Max Min ambient working temp Max Contacts ac rating At max Contacts dc rating At max

ACCESSORIES Mounting hardware

SPECIAL REQUIREMENTS Custom tag Reference specification Compliance standard

PHYSICAL DATA Estimated weight Overall height Removal clearance Signal conn nominal size Mfr reference dwg

SETPOINT LRV

Appv1 Appv2 Appv3

ACTION

LRV

URV

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20L2371 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Style

OUTPUT URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

LIQUID LEVEL GAGE GLASS w/wo ILLUMINATOR Device Specification

CHAMBER AND COVER Chamber type Process conn nominal size Rating Process conn termn type Style Flange facing finish Process conn location Vent/Drain conn nom size Rating Vent/Drain conn type Style Nominal pressure Number of sections Weld pad radius size Vent/Drain plug type Support plates lct Heating/Cooling type Chamber material Cover material Lining material Bolting material Exterior treatment matl Gasket material Cushion material

GAGE GLASS Glass type Glass nominal size Frost-proof extension lg Visible length Glass/Tube protector type Glass/Tube material Shield material-thickness

INTERCONNECTING ASSEMBLY Interconnection type Nipple/Piping nom size Schedule no Valve offset orientation Gage orientation Assembled by Nipple/Piping material Exterior coating material

GAGE VALVES Valve body type Bonnet style Vessel conn nominal size Rating Vessel conn termn type Style Gage/Glass conn nom size Rating CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Level -Scale Test pressure

COMPONENT TYPE

Date

Revision Description

6 7 8 9 10

60 GAGE VALVES cpntinued 61 Gage/Glass conn type Style 62 Vent/Drain conn nom size Rating 63 Vent/Drain conn type Style 64 Max press at design temp At 65 Vessel union/shank type 66 Gage union/conn type 67 Seat type 68 Heating/Cooling type 69 Hand actuator style 70 Stem style 71 Body-Bonnet material 72 Trim material 73 Ball check shutoff matl 74 75 76 GAGE ILLUMINATOR 77 Illumination type 78 Power source 79 Enclosure type no/class 80 Cert/Approval type 81 82 PERFORMANCE CHARACTERISTICS 83 Max press at design temp At 84 Min working temperature Max 85 Max working pressure 86 87 88 ACCESSORIES 89 Gage scale divisions 90 Gage scale material 91 Vent valves material 92 Drain valves material 93 Bleed fitting material 94 Flexible insulation 95 96 SPECIAL REQUIREMENTS 97 Custom tag 98 Reference specification 99 Compliance standard 100 Construction code 101 Cert/Approval type 102 103 PHYSICAL DATA 104 Estimated weight 105 Gage overall length 106 Min vessel centers 107 Mfr reference dwg 108 INPUT ORTEST SCALE LRV URV LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20L2501 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

MAGNETIC LIQUID LEVEL GAGE OR INDICATOR w/wo SWITCHES Device Specification

CAGE OR CHAMBER Cage/Chamber type Process conn nominal size Rating Process conn termn type Style Lower conn location Upper Top connection style Bottom Vent/Drain conn nom size Rating Vent/Drain termn type Style Cage/Chamber pipe sched Cage/Chamber material Lining material Bolting material Flange material Gasket material

SENSING ELEMENT Sensor Type Sp gr Lower Range-Limit URL Min level span Max Sensor quantity Extension length Float/Displacer length Float/Displacer material

GAGE OR INDICATOR Type Seal style Visible length Gage scale divisions Orientation to conn Bicolor wafer colors Cover material Indicator material

SWITCH MECHANISM Housing type Element style Output signal type Enclosure type no/class Signal power source Contacts arrangement Signal termination type Cert/Approval type Enclosure material

Quantity

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Level-Scale Level setpoint 1-Output Level setpoint 2-Output Test pressure --`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

COMPONENT TYPE

Date

Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 PERFORMANCE CHARACTERISTICS 61 Max press at design temp At 62 Min working temperature Max 63 Repeatability 64 Min sp gr differential 65 Deadband rating 66 Min ambient working temp Max 67 Contacts ac rating At max 68 Contacts dc rating At max 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 ACCESSORIES 86 Heating kit style 87 Isolation valve style 88 Vent/Drain valve style 89 90 91 92 SPECIAL REQUIREMENTS 93 Custom tag 94 Reference specification 95 Special preparation 96 Compliance standard 97 Construction code 98 99 100 PHYSICAL DATA 101 Estimated weight 102 Overall height 103 Removal clearance 104 Upper to lower conn lg 105 Lower to drain conn lg 106 Signal conn nominal size Style 107 Mfr reference dwg 108 INPUT OR SETPOINT SCALE LRV URV ACTION LRV URV

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20L2511 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

Not for Resale

RESPONSIBLE ORGANIZATION

PRESSURE GAUGE

6 7 8 9 10

Device Specification

OPERATING PARAMETERS Project number Sub project no Project Enterprise Site Area Cell Unit Related equipment Service P&ID/Reference dwg number Material name Minimum pressure Normal pressure Maximum pressure Normal temperature Maximum temperature Material phase

PROCESS CONNECTION AND CASE Case type Case style Gauge size Process conn nominal size Style Process conn location Case pressure relief type Ring style Mounting type Case material Ring material Exterior treatment-color Window material Stem material Gasket/O ring material Liquid fill material

PRESSURE ELEMENT AND MOVEMENT Elastic element type Movement style Nominal accuracy grade Joint type Element material Movement material

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

DIAL AND POINTER Dial scale type Pointer adjustment Graduations and color Scale range type Dial material

SIPHON Siphon type End conn nominal size Overall length Siphon material

Style

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Min ambient working temp Max

ACCESSORIES Pressure limit valve matl Restrictor style Pressure snubber matl Pulsation dampener matl

SPECIAL REQUIREMENTS Custom tag Reference specification Special preparation Compliance standard Service design

PHYSICAL DATA Estimated weight Maximum thickness Max case outside dia Mfr reference dwg

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT PRESSURE OR SCALE Pressure/Scale 1 Pressure/Scale 2

COMPONENT TYPE

Date

Revision Description

SCALE LRV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Appv1 Appv2 Appv3

URV

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20P2001 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

RESPONSIBLE ORGANIZATION

PRESSURE GAUGE WITH DIAPHRAGM SEAL Device Specification

OPERATING PARAMETERS Project number Sub project no Project Enterprise Site Area Cell Unit Related equipment Service P&ID/Reference dwg number Material name Minimum pressure Normal pressure Maximum pressure Normal temperature Maximum temperature Material phase

PROCESS CONNECTION AND CASE Case type Case style Gauge size Process conn nominal size Style Process conn location Case pressure relief type Ring style Mounting type Case material Ring material Exterior treatment-color Window material Stem material Seal/O ring material Liquid fill material

PRESSURE ELEMENT AND MOVEMENT Elastic element type Movement style Nominal accuracy grade Joint type Element material Movement material

DIAL AND POINTER Dial scale type Pointer adjustment CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT PRESSURE OR SCALE Pressure/Scale 1 Pressure/Scale 2

COMPONENT TYPE

Date

Revision Description

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

DIAL AND POINTER continued Graduations and color Scale range type Dial material

DIAPHRAGM SEAL Seal type Process conn nom size Rating Process conn termn type Style Diaphragm extension lg Flushing conn quantity Capillary diameter Length Instrument conn nom size Diaphragm/wall material Capillary-armor material Bolting material Upper housing material Lower housing material Gasket/O ring material Fill fluid material

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Ambient temperature error Min ambient working temp Max

ACCESSORIES Locking device material

SPECIAL REQUIREMENTS Custom tag Reference specification Special preparation Compliance standard Service design PHYSICAL DATA Estimated weight Maximum thickness Max case outside dia Mfr reference dwg

SCALE

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

LRV

Appv1 Appv2 Appv3

URV

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20P2011 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Not for Resale

RESPONSIBLE ORGANIZATION

DIFFERENTIAL PRESSURE GAUGE Device Specification

OPERATING PARAMETERS Project number Sub project no Project Enterprise Site Area Cell Unit Related equipment Service P&ID/Reference dwg number Material name Maximum pressure Maximum temperature Material phase Min diff pressure Norm diff pressure Max diff pressure

PROCESS CONNECTION AND CASE Case type Case style Gauge size Process conn nominal size Style Process conn location Case pressure relief type Ring style Mounting type Case material Ring material Exterior treatment-color Window material Stem material Gasket/O ring material Liquid fill material

PRESSURE ELEMENT AND MOVEMENT Elastic element type Movement style Nominal accuracy grade Joint type Element material Movement material

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

DIAL AND POINTER Dial scale type Pointer adjustment Graduations and color Scale range type Dial material

SIPHON Siphon type End conn nominal size Overall length Siphon material

Style

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Max diff pressure Min ambient working temp Max

ACCESSORIES Pressure limit valve matl Restrictor style Pressure snubber matl Pulsation dampener matl Scale overlays SPECIAL REQUIREMENTS Custom tag Reference specification Special preparation Compliance standard Service design

PHYSICAL DATA Estimated weight Maximum thickness Max case outside dia Mfr reference dwg

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT PRESSURE OR SCALE Diff pressure/Scale 1 Diff pressure/Scale 2

COMPONENT TYPE

Date

Revision Description

SCALE LRV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20P2101 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

URV

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Not for Resale

RESPONSIBLE ORGANIZATION

PRESSURE TRANSMITTER

6 7 8 9 10

Device Specification

TRANSMITTER BODY Body/Flange type Process conn nominal size Rating Process conn termn type Style Vent/Drain location Mounting type Body/Flange material Vent/Drain material Bolting material Flange adapter material Gasket/O ring material Mounting kit material

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

SENSING ELEMENT Detector type Min pressure span Max Diaphragm/Wetted material Fill fluid material

TRANSMITTER Output signal type Enclosure type no/class Characteristic curve Digital communication std Signal power source Transient protection Integral indicator style Signal termination type Cert/Approval type Span-Zero adjust lct Failure/Diagnostic action Enclosure material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Pressure-Analog output Pressure-Scale Pressure-Digital output Temp-Digital output

COMPONENT TYPE

Date

Revision Description

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Accuracy rating Pressure LRL URL Min ambient working temp Max

ACCESSORIES Air set filter style Air set gauges Heating kit style Remote indicator style Manifold valve style SPECIAL REQUIREMENTS Custom tag Reference specification Special preparation Compliance standard Software configuration

PHYSICAL DATA Estimated weight Overall height Removal clearance Signal conn nominal Mfr reference dwg

Appv1 Appv2 Appv3

URV

ACTION

OUTPUT OR SCALE LRV URV

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20P2201 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Style

INPUT LRV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Not for Resale

RESPONSIBLE ORGANIZATION

PRESSURE TRANSMITTER WITH DIAPHRAGM SEAL Device Specification

TRANSMITTER BODY Body/Flange type Process conn nominal size Rating Process conn termn type Style Vent/Drain location Mounting type Body/Flange material Vent/Drain material Bolting material Flange adapter material Gasket/O ring material Mounting kit material SENSING ELEMENT Detector type Min pressure span Max Diaphragm/Wetted material Fill fluid material TRANSMITTER Output signal type Enclosure type no/class Characteristic curve Digital communication std Signal power source Transient protection Integral indicator style Signal termination type Cert/Approval type Span-Zero adjust lct Failure/Diagnostic action Enclosure material DIAPHRAGM SEAL Seal type Process conn nominal size Rating Process conn termn type Style Diaphragm extension lg Flushing conn quantity Instrument conn nom size Capillary/Fitting dia Length Diaphragm material Capillary-armor matl Bolting material Upper housing material Lower housing/Flange matl Gasket/O ring material Fill fluid material CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Pressure-Analog output Pressure-Scale Pressure-Digital output Temp-Digital output

COMPONENT TYPE

Date

Revision Description

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

6 7 8 9 10

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Accuracy rating Pressure Lower Range-Limit URL Ambient temperature error Min ambient working temp Max

ACCESSORIES Air set filter style Air set gauges Heating kit style Remote indicator style

SPECIAL REQUIREMENTS Custom tag Reference specification Special preparation Compliance standard Software configuration

PHYSICAL DATA Estimated weight Overall height Removal clearance Signal conn nominal size Mfr reference dwg

INPUT LRV

URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

ACTION

OUTPUT OR SCALE LRV URV

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20P2211 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Style

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

DIFFERENTIAL PRESSURE TRANSMITTER Device Specification

TRANSMITTER BODY Body/Flange type Process conn nominal size Rating Process conn termn type Style Vent/Drain location Mounting type Body/Flange material Vent/Drain material Bolting material Flange adapter material Gasket/O ring material Mounting kit material

SENSING ELEMENT Detector type Min diff press span Diaphragm/Wetted material Fill fluid material

Max

TRANSMITTER Output signal type Enclosure type no/class Characteristic curve Digital communication std Signal power source Transient protection Integral indicator style Signal termination type Cert/Approval type Span-Zero adjust lct Failure/Diagnostic action Enclosure material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Diff press-Analog output Diff pressure-Scale Diff press-Digital output Press-Digital output Temp-Digital output

COMPONENT TYPE --`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Date

Revision Description

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

ACCESSORIES Air set filter style Air set gauges Heating kit style Remote indicator style Manifold valve style SPECIAL REQUIREMENTS Custom tag Reference specification Special preparation Compliance standard Software configuration

PHYSICAL DATA Estimated weight Overall height Removal clearance Signal con nominal size Mfr reference dwg

INPUT LRV

URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Accuracy rating Diff pressure LRL URL Min ambient working temp Max

Appv1 Appv2 Appv3

ACTION

Style

OUTPUT OR SCALE LRV URV

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20P2301 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

Not for Resale

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

DIFFERENTIAL PRESSURE TRANSMITTER WITH DIAPHRAGM SEALS Device Specification

TRANSMITTER BODY Body/Flange type Process conn nominal size Rating Process conn termn type Style Vent/Drain location Mounting type Body/Flange material Vent/Drain material Bolting material Flange adapter material Gasket/O ring material Mounting kit material SENSING ELEMENT Detector type Min diff pressure span Max Diaphragm/Wetted material Fill fluid material TRANSMITTER Output signal type Enclosure type no/class Characteristic curve Digital communication std Signal power source Transient protection Integral indicator style Signal termination type Cert/Approval type Span-Zero adjust lct Failure/Diagnostic action Enclosure material HIGH SIDE SEAL Seal type Process conn nominal size Process conn termn type Diaphragm extension lg Flushing conn quantity Instrument conn nom size Capillary/Fitting dia Diaphragm material Capillary-armor matl Bolting material Upper housing material Lower housing/Flange matl Gasket/O ring material Fill fluid material

Rating Style

Length

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Diff press-Analog output Diff press-Scale Diff press-Digital output Press-Digital output Temp-Digital output

COMPONENT TYPE

Date

Revision Description

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

6 7 8 9 10

LOW SIDE SEAL Seal type Process conn nominal size Process conn termn type Diaphragm extension lg Flushing conn quantity Instrument conn nom size Capillary/Fitting dia Diaphragm material Capillary-armor material Bolting material Upper housing material Lower housing/Flange matl Gasket/O ring material Fill fluid material

Length

ACCESSORIES Air set filter style Air set gauges Heating kit style Remote indicator style SPECIAL REQUIREMENTS Custom tag Reference specification Special preparation Compliance standard Software configuration

PHYSICAL DATA Estimated weight Overall height Removal clearance Signal conn nominal size Mfr reference dwg

INPUT LRV

URV

Appv1 Appv2 Appv3

ACTION

Style

OUTPUT OR SCALE LRV URV

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20P2311 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Rating Style

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Accuracy rating Diff pressure LRL URL Fill fluid sp gr At temp Ambient temperature error Min ambient working temp Max

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

PRESSURE SWITCH w/wo TRANSMITTER Device Specification

SWITCH BODY Body type Process conn nominal size Process conn termn type Body material Seal/O ring material

Rating Style

SENSING ELEMENT Sensor element type Adjustable LRL URL Diaphragm/Wetted material

SWITCH MECHANISM w/wo TRANSMITTER Housing type Element Style Output signal type Enclosure type no/class Reset style Set point Adjustment type Signal power source Measurement type Contacts arrangement Quantity Failsafe style Integral indicator style Signal termination type Cert/Approval type Mounting type Dead band type Enclosure material Exterior treatment matl

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Press setpoint 1-Output Press setpoint 2-Output Pressure-Analog output Pressure-Scale

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 Rev

COMPONENT TYPE

Date

Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

59 PERFORMANCE CHARACTERISTICS 60 Max press at design temp At 61 Min working temperature Max 62 Output accuracy rating 63 Repeatability 64 Press Lower Range-limit URL 65 Max overrange limit 66 Dead band rating 67 Min ambient working temp Max 68 Contacts ac rating At max 69 Contacts dc rating At max 70 71 72 73 74 75 76 77 78 79 80 81 82 83 ACCESSORIES 84 Sealed leads adapter 85 Breather/Drain style 86 87 88 89 90 SPECIAL REQUIREMENTS 91 Custom tag 92 Reference specification 93 Special preparation 94 Compliance standard 95 96 97 98 PHYSICAL DATA 99 Estimated weight 100 Overall height 101 Removal clearance 102 Signal conn nominal size Style 103 Mfr reference dwg 104 105 106 INPUT/SETPOINT/TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20P2401 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 Rev

RESPONSIBLE ORGANIZATION

DIFFERENTIAL PRESSURE SWITCH w/wo TRANSMITTER Device Specification

SWITCH BODY Body type Process conn nominal size Process conn termn type Body material Seal/O ring material

Rating Style

SENSING ELEMENT Sensor element type Adjustable LRL URL Diaphragm/Wetted material

SWITCH MECHANISM w/wo TRANSMITTER Housing type Element Style Output signal type Enclosure type no/class Reset style Set point Adjustment type Signal power source Measurement type Contacts arrangement Quantity Failsafe style Integral indicator style Signal termination type Cert/Approval type Mounting type Dead band type Enclosure material Exterior coating material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST DP setpoint 1-Output DP setpoint 2-Output Diff press-Analog output Diff pressure-Scale

COMPONENT TYPE

Date

Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

59 PERFORMANCE CHARACTERISTICS 60 Max press at design temp At 61 Min working temperature Max 62 Output accuracy rating 63 Repeatability 64 Diff press Lower Range-Limit URL 65 Max overrange limit 66 Dead band rating 67 Min ambient working temp Max 68 Contacts ac rating At max 69 Contacts dc rating At max 70 71 72 73 74 75 76 77 78 79 80 81 82 83 ACCESSORIES 84 Sealed leads adapter 85 Breather/Drain style 86 87 88 89 90 SPECIAL REQUIREMENTS 91 Custom tag 92 Reference specification 93 Special preparation 94 Compliance standard 95 96 97 98 PHYSICAL DATA 99 Estimated weight 100 Overall height 101 Removal clearance 102 Signal conn nominal size Style 103 Mfr reference dwg 104 105 106 INPUT OR SETPOINT OUTPUT OR SCALE LRV URV ACTION LRV URV

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20P2501 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

Not for Resale

RESPONSIBLE ORGANIZATION

RUPTURE DISC ASSEMBLY w/wo BURST SENSOR Device Specification

DISC HOLDER Assembly type Disc holder style Inlet conn nominal size Inlet conn termn type Outlet conn nominal size Outlet conn termn type End conn schedule no Gauge tap conn nom size Companion flange design Preassembly method Knife blade type Seat style Jack screws Alignment style Lifting device Inlet base/Body matl Outlet holddown/Body matl Lining/Coating material Bolting material Gasket/O ring material

6 7 8 9 10

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

Rating Style Rating Style Style

RUPTURE SENSOR Sensor type Configuration style Contacts arrangement Lead wire length Signal termination type Cert/Approval type Sensor material Membrane/Seal material Gasket material RUPTURE DISC Disc type Disc shape configuration Disc nominal size Nominal mfg range Prot liner/cover location Ring location Disc material Seal material Vacuum support material Ring material Prot liner/cover matl Gasket material Coating material CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Positive burst pressure Vacuum burst pressure

PRESSURE

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

PERFORMANCE CHARACTERISTICS Min working temperature Max Max opr pressure ratio Rupture/Burst tolerance Ref Flow resistance factor Mfg design range LRL URL Minimum net flow area Contact ac rating At max Contact dc rating At max

ACCESSORIES Spare disc quantity Baffle plate Excess flow valve Nipple and tee Pressure gauge

SPECIAL REQUIREMENTS Custom tag Reference specification Special preparation Compliance standard Construction code Certification Special testing

PHYSICAL DATA Estimated weight Overall height Outside diameter Mfr reference dwg

TEST TEMPERATURE

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

MANUFACTURER

Revision Description

By

Appv1 Appv2

MODEL NUMBER

Appv3

--`,,```,,,,````-`-`,,`,,

Form: 20P2901 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

REMARKS

© 2004 ISA

Not for Resale

RESPONSIBLE ORGANIZATION

PRESSURE RELIEF VALVE Device Specification

VALVE BODY Body type Nozzle style Valve nominal size Inlet conn nominal size Inlet conn termn type Outlet conn nominal size Outlet conn termn type Body/Cylinder material Nozzle/Base material Bolting material Separable flange matl Gasket/O ring material

Rating Style Rating Style

VALVE TRIM Trim type Seat style Orifice designation Blowdown type Disc holder material Disc insert material Guide material O ring/Soft seat matl Bellows material Adjusting ring material

Effective area

SPRING AND BONNET Bonnet type Bonnet style Lifting device type Cap type Restricted lift style Bonnet/Yoke material Spring material Spring washer/Step matl Adjusting screw/Bolt matl Stem/Spindle material Cap material Gasket/O ring matl

CALIBRATIONS AND TEST TAG NUMBER TEST CDTP-Setpoint Blowdown-Setpoint

COMPONENT TYPE

Date

Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 PERFORMANCE CHARACTERISTICS 61 Max inlet press at temp At 62 Max back press at temp At 63 Min working temperature Max 64 Set pressure LRL URL 65 Rated relieving capacity At 66 Rated coef of discharge 67 Rated seat leakage rate 68 Actual discharge area 69 70 71 72 73 74 75 76 77 78 79 80 ACCESSORIES 81 Silencer 82 Weatherhood 83 Drip pan elbow 84 Bugproof vent 85 86 87 88 SPECIAL REQUIREMENTS 89 Custom tag 90 Reference specification 91 Special preparation 92 Compliance standard 93 Construction code 94 Certification 95 Special inspection 96 Service design 97 98 99 PHYSICAL DATA 100 Estimated weight 101 Overall height 102 Dismantle clearance 103 Inlet center-to face lg 104 Outlet center-to face lg 105 Mfr reference dwg 106 107 108 INPUT OR SETPOINT LRV URV

Appv1 Appv2 Appv3

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#

Form: 20P2921 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

MODEL NUMBER

REMARKS

© 2004 ISA

Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

RECEIVER GAUGE

6 7 8 9 10

Device Specification

SIGNAL CONNECTION AND CASE Case type Gauge style Gauge size Signal conn nominal size Style Signal conn location Case pressure relief type Ring style Mounting type Case material Ring material Exterior treatment-color Window material Stem material Gasket/O ring material

PRESSURE ELEMENT AND MOVEMENT Elastic element type Movement style Nominal accuracy grade Joint type Internal stops Element material Movement material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT PRESSURE OR SCALE Input signal-Scale 1 Input signal-Scale 2

COMPONENT TYPE

Date

Revision Description

38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

DIAL AND POINTER Dial scale type Pointer adjustment Graduations and color Scale range type Dial material

PERFORMANCE CHARACTERISTICS Min ambient working temp Max

ACCESSORIES Mounting hardware

SPECIAL REQUIREMENTS Custom tag Reference specification Compliance standard PHYSICAL DATA Estimated weight Maximum thickness Max case outside dia Mfr reference dwg INPUT

LRV

URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

Appv1 Appv2 Appv3

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

SCALE LRV

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20R2201 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

URV

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 Rev

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

BIMETALLIC THERMOMETER w/wo THERMOWELL Device Specification

OPERATING PARAMETERS Project number Sub project no Project Enterprise Site Area Cell Unit Related equipment Service P&ID/Reference dwg number Material name Maximum pressure Minimum temperature Normal temperature Maximum temperature Material phase Maximum fluid velocity

PROCESS CONNECTION AND CASE Case type Case style Case size Connector conn nom size Connector conn type Style Connection location Ring style Stem outside diameter Length Stem/Bulb material Case material Ring material Exterior treatment-color Window material Connector material

SENSING ELEMENT Element type Nominal accuracy grade

DIAL AND POINTER Dial scale type Pointer adjustment Graduations and color

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS OR TEST Temperature/Scale 1 Temperature/Scale 2 Test pressure

COMPONENT TYPE

Date

Revision Description

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Max fluid velocity limit At temp Sensitive portion length Min ambient working temp Max

ACCESSORIES Bushing nominal size Bushing material

SPECIAL REQUIREMENTS Custom tag Reference specification Compliance standard Construction code Calculation report

PHYSICAL DATA Estimated weight Removal clearance Maximum thickness Max case outside dia Mfr reference dwg

TEST

SCALE URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

THERMOWELL OR PROTECTING TUBE Construction type Shank style Process conn nominal size Rating Process conn termn type Style Internal conn nom size Style Bore diameter Outside dia at support Outside diameter at tip Insertion length “U” Lagging extension lg “T” Thermowell/Tube material Sheath material-thickness

Appv1 Appv2 Appv3

LRV

URV

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,

© 2001 ISA

Form: 20T2001 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

Not for Resale

FILLED-SYSTEM THERMOMETER ASSEMBLY w/wo THERMOWELL Device Specification

OPERATING PARAMETERS Project number Sub project no Project Enterprise Site Area Cell Unit Related equipment Service P&ID/Reference dwg number Material name Maximum pressure Minimum temperature Normal temperature Maximum temperature Material phase Maximum fluid velocity

BULB AND CASE Case type Stem/Bulb extension style Case size Connector conn nom size Connector conn type Connection location Ring style Stem/Bulb outside dia Mounting type Stem/Bulb material Case-Ring material Exterior treatment-color Window material Connector material

Style

Length

CAPILLARY AND SENSING ELEMENT Thermal system type Compensation style Nominal accuracy grade Capillary length Capillary material Coating-armor material

DIAL AND POINTER Dial scale type Pointer adjustment CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT TEMP OR TEST Temperature/Scale 1 Temperature/Scale 2 Test pressure

COMPONENT TYPE

Date

Revision Description

6 SPECIFICATION IDENTIFICATIONS 7 Document no 8 Latest revision Date 9 Issue status 10 THERMOWELL/PROTECTING TUBE continued Graduations and color

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

THERMOWELL OR PROTECTING TUBE Construction type Shank style Process conn nominal size Rating Process conn termn type Style Internal conn nom size Style Bore diameter Outside dia at support Outside diameter at tip Insertion length “U” Lagging extension lg “T” Thermowell/Tube material Sheath material-thickness

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Max fluid velocity limit At temp Sensitive portion length Ambient temperature error Min ambient working temp Max

ACCESSORIES Bushing nominal size Bushing material

SPECIAL REQUIREMENTS Custom tag Reference specification Compliance standard Construction code Calculation report PHYSICAL DATA Estimated weight Removal clearance Maximum thickness Max case outside dia Mfr reference dwg TEST

COMPONENT IDENTIFICATIONS MANUFACTURER

By

Appv1 Appv2 Appv3

LRV

URV

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20T2101 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

SCALE URV

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

FILLED-SYSTEM TEMPERATURE SWITCH w/wo THERMOWELL Device Specification

PROCESS CONNECTION AND BULB Bulb type Stem/Bulb extension style Connector conn nom size Connector conn type Style Fitting type Stem/Bulb diameter Length Bulb extension length Stem/Bulb material Connector material

CAPILLARY AND SENSING ELEMENT Thermal system type Compensation style Temperature LRL URL Capillary length Capillary material Coating-armor material

SWITCH MECHANISM Type Element style Enclosure type no/class Reset style Set point adjustment lct Signal power source Dead band type Contacts arrangement Integral indicator style Signal termination type Cert/Approval type Mounting type Signal conn orientation Enclosure material Exterior coating material

Quantity

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS OR TEST Temp setpoint 1-Output Temp setpoint 2-Output Temperature-Scale Test pressure

COMPONENT TYPE

Date

Revision Description

6 7 8 9 10

60 THERMOWELL OR PROTECTING TUBE 61 Construction type 62 Shank style 63 Process conn nominal size Rating 64 Process conn termn type Style 65 Internal conn nom size Style 66 Bore diameter 67 Outside dia at support 68 Outside dia at tip 69 Insertion length “U” 70 Lagging extension lg “T” 71 Thermowell/Tube material 72 Sheath material-thickness 73 74 75 PERFORMANCE CHARACTERISTICS 76 Max press at design temp At 77 Min working temperature Max 78 Max fluid velocity limit At temp 79 Repeatability 80 Max overrange limit 81 Ambient temperature error 82 Dead band rating 83 Min ambient working temp Max 84 Contacts ac rating At max 85 Contacts dc rating At max 86 87 88 ACCESSORIES 89 Bushing nominal size 90 Bushing material 91 Sealed leads adapter 92 Breather/Drain style 93 94 SPECIAL REQUIREMENTS 95 Custom tag 96 Reference specification 97 Special preparation 98 Compliance standard 99 Calculation report 100 101 102 PHYSICAL DATA 103 Estimated weight 104 Overall height 105 Removal clearance 106 Signal conn nominal size Style 107 Mfr reference dwg 108 INPUT/SETPOINT/TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20T2111 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

FILLED-SYSTEM TEMPERATURE TRANSMITTER w/wo THERMOWELL Device Specification

PROCESS CONNECTION AND BULB Bulb type Stem/Bulb extension style Connector conn nom size Connector conn type Style Fitting type Stem/Bulb diameter Length Bulb extension length Stem/Bulb material Connector material Packing material

CAPILLARY AND SENSING ELEMENT Thermal system type Compensation style Temperature LRL URL Min temperature span Max Capillary length Capillary material Coating-armor material

TRANSMITTER Housing type Output signal type Enclosure type no/class Signal power source Integral indicator style Signal termination type Cert/Approval type Mounting type Enclosure material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS OR TEST Temp-Analog output Temperature-Scale Test pressure

COMPONENT TYPE

Date

Revision Description

6 7 8 9 10

60 THERMOWELL OR PROTECTING TUBE 61 Construction type 62 Shank style 63 Process conn nominal size Rating 64 Process conn termn type Style 65 Internal conn nom size Style 66 Bore diameter 67 Outside dia at support 68 Outside dia at tip 69 Insertion length “U” 70 Lagging extension lg “T” 71 Thermowell/tube material 72 Sheath material-thickness: 73 74 75 76 PERFORMANCE CHARACTERISTICS 77 Max press at design temp At 78 Min working temperature Max 79 Max fluid velocity limit At temp 80 Accuracy rating 81 Max overrange limit 82 Ambient temperature error 83 Min ambient working temp Max 84 85 86 87 ACCESSORIES 88 Bushing nominal size 89 Bushing material 90 Air set filter style 91 Pressure gauges 92 93 SPECIAL REQUIREMENTS 94 Custom tag 95 Reference specification 96 Compliance standard 97 Construction code 98 Calculation report 99 100 101 PHYSICAL DATA 102 Estimated weight 103 Overall height 104 Removal clearance 105 Signal conn nominal size Style 106 Mfr reference dwg 107 108 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20T2121 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

RTD ASSEMBLY w/wo THERMOWELL Device Specification

PROTECTIVE SHEATH AND FITTING Housing type Pad/Collar type Fitting conn nominal size Style Mounting fitting type Sheath alignment Sheath outside diameter Length Spring loading Sheath material Fitting material SENSING ELEMENT Sensor type Sensor quantity Temperature coefficient Tolerance class Nominal resistance At temp Configuration-no of wires Sensor material Insulator material LEAD WIRE AND HEAD EXTENSION Extension type Ext wire nom size-type Extension/Lead length Nipple-union nom size Rating Nipple pipe schedule no Transition type Termination style Connecting wire length Shield - ground wire Nipple material Union/Coupling material Coating-armor material Extension wire material Ext wire insulation matl

CONNECTION HEAD Housing type Cover style Element conn nominal size Style Signal conn nominal size Style Enclosure type no/class Grounding terminal lct Enclosure material Terminal block material Terminal material CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Temp-Output signal Test pressure

COMPONENT TYPE

Date

Revision Description

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 THERMOWELL OR PROTECTING TUBE 61 Construction type 62 Shank style 63 Process conn nominal size Rating 64 Process conn termn type Style 65 Internal conn nom size Style 66 Bore diameter 67 Outside dia at support 68 Outside dia at tip 69 Insertion length “U” 70 Lagging extension lg “T” 71 Thermowell/Tube material 72 Sheath material-thickness 73 74 75 PERFORMANCE CHARACTERISTICS 76 Max press at design temp At 77 Min working temperature Max 78 Max fluid velocity limit At temp 79 Temp Lower Range-Limit URL 80 Min insertion length 81 Min ambient working temp Max 82 83 84 85 ACCESSORIES 86 Moisture seal style 87 Bayonet adapter size 88 89 90 91 92 SPECIAL REQUIREMENTS 93 Custom tag 94 Reference specification 95 Compliance standard 96 Construction code 97 Calculation report 98 Calibration report 99 100 101 102 PHYSICAL DATA 103 Estimated weight 104 Overall length 105 Removal clearance 106 Mfr reference dwg 107 108 INPUT OR TEST OUTPUT LRV URV LRV URV

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20T2201 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

6 7 8 9 10

Not for Resale

RTD/THERMOCOUPLE TEMPERATURE TRANSMITTER OR SWITCH Device Specification

TRANSMITTER OR SWITCH Housing type Input sensor type Output signal type Min measurement span Max Temp coef/Tolerance cl Isolation type Enclosure type no/class Adjustment type Characteristic curve Digital communication std Signal power source Measurement type Configuration-no of wires Contacts arrangement Quantity Failsafe style Transient protection Integral indicator style Signal termination type Cert/Approval type Mounting type Failure/Diagnostic action Dead band type Switch time delay Temp compensation type Enclosure material Mounting kit material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Temp- Analog output 1 Temp-Analog output 2 Temp-Scale Temp diff-Digital output Temp-Digital output Termn temp-Digital output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

52 PERFORMANCE CHARACTERISTICS 53 Accuracy rating 54 Measurement LRL URL 55 Min ambient working temp Max 56 Contacts ac rating At max 57 Contacts dc rating At max 58 59 60 61 62 63 64 65 66 67 68 ACCESSORIES 69 Remote indicator style 70 Indicator enclosure 71 Air set filter style 72 Air set gauges 73 74 75 SPECIAL REQUIREMENTS 76 Custom tag 77 Reference specification 78 Compliance standard 79 Calibration report 80 Software configuration 81 82 83 84 PHYSICAL DATA 85 Estimated weight 86 Overall height 87 Removal clearance 88 Signal conn nominal size Style 89 Mfr reference dwg 90 91 92 INPUT OR SETPOINT OUTPUT OR SCALE LRV URV ACTION LRV URV //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 Rev

Temp setpoint 1-Output Temp setpoint 2-Output Temp setpoint 3-Output Temp setpoint 4-Output

COMPONENT TYPE

Date

COMPONENT IDENTIFICATIONS MANUFACTURER

Revision Description

By

Appv1 Appv2 Appv3

REMARKS

© 2001 ISA

Form: 20T2221 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

MODEL NUMBER

Not for Resale

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

THERMOCOUPLE ASSEMBLY w/wo THERMOWELL Device Specification

PROTECTIVE SHEATH AND FITTING Housing type Pad/Collar type Fitting conn nominal size Style Mounting fitting type Sheath alignment Sheath outside diameter Length Spring loading Sheath/Braid material Fitting material SENSING ELEMENT Sensor type Wire nominal size Thermocouple type Tolerance class Measuring junction Thermocouple wire matl Insulator material

Quantity

LEAD WIRE AND HEAD EXTENSION Extension type Ext wire nom size-type Extension/Lead length Nipple-union nom size Rating Nipple pipe sched no Transition type Termination style Connecting wire length Shield - ground wire Nipple material Union/Coupling material Coating-armor material Extension wire material Ext wire insulation matl

CONNECTION HEAD Housing type Cover style Element conn nominal size Style Signal conn nominal size Style Enclosure type no/class Grounding terminal lct Enclosure material Terminal block material Terminal material CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Temp-Output signal Test pressure

COMPONENT TYPE

Date

Revision Description

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

60 THERMOWELL OR PROTECTING TUBE 61 Construction type 62 Shank style 63 Process conn nominal size Rating 64 Process conn termn type Style 65 Internal conn nom size Style 66 Bore diameter 67 Outside dia at support 68 Outside dia at tip 69 Insertion length “U” 70 Lagging extension lg “T” 71 Thermowell/Tube material 72 Sheath material-thickness 73 74 75 PERFORMANCE CHARACTERISTICS 76 Max press at design temp At 77 Min working temperature Max 78 Max fluid velocity limit At temp 79 Temp Lower Range-Limit URL 80 Min ambient working temp Max 81 82 83 84 ACCESSORIES 85 Moisture seal style 86 Bayonet adapter size 87 88 89 90 91 SPECIAL REQUIREMENTS 92 Custom tag 93 Reference specification 94 Compliance standard 95 Construction code 96 Calculation report 97 Calibration report 98 99 100 101 PHYSICAL DATA 102 Estimated weight 103 Overall length 104 Removal clearance 105 Mfr reference dwg 106 107 108 INPUT OR TEST OUTPUT LRV URV LRV URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

Appv1 Appv2 Appv3

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20T2301 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

THERMAL RADIATION TEMPERATURE SENSOR w/wo MONITOR Device Specification

SENSING ELEMENT Sensor type Temperature LRL Spectral response Focus type

URL

HEAD AND VIEWER Head type Housing style Enclosure type no/class Sighting type Lens purge style Conn adapter type Cable length Signal termination type Cert/Approval type Mounting type Enclosure material

TRANSMITTER OR MULTIPLEXER Type Signal selector type Cable length Output signal type Enclosure type no/class Signal power source Adjustment type Number input sensors

6 7 8 9 10

60 MONITOR Continued 61 Failure/Diagnostic action 62 Enclosure material 63 64 65 PERFORMANCE CHARACTERISTICS 66 Min head working temp Max 67 Temp accuracy rating 68 Focus point D:S ratio 69 Far point D:S ratio 70 Min monitor amb working Max 71 Contacts ac rating At max 72 Contacts dc rating At max 73 74 75 76 77 78 79 80 81 82 83 84 ACCESSORIES 85 Blast gate style 86 Cooling flow regulator 87 Sight tube material 88 Printer 89 90 91 SPECIAL REQUIREMENTS 92 Custom tag 93 Reference specification 94 Compliance standard 95 Calibration report 96 Software configuration 97 98 99 100 PHYSICAL DATA 101 Estimated weight 102 Overall height 103 Removal clearance 104 Signal conn nominal size Style 105 Mfr reference dwg 106 107 108 INPUT OR SETPOINT OUTPUT OR SCALE LRV URV ACTION LRV URV

MONITOR Housing type External input type Output signal type Zero-span adjustment lct Enclosure type no/class Measurement type Digital communication std Signal power source Dead band type Contacts arrangement Quantity Emissivity adjustment Failsafe style Integral indicator style Signal termination type Cert/Approval type Mounting type Temperature compensation CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Temp-Analog output 1 Temp-Analog output 2 Temp-Analog output 3 Temperature-Scale Temp setpoint 1-Output Temp setpoint 2-Output COMPONENT IDENTIFICATIONS COMPONENT TYPE MANUFACTURER

Date

Revision Description

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20T2401 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

RESPONSIBLE ORGANIZATION

THERMOWELL OR PROTECTING TUBE ASSEMBLY Device Specification

OPERATING PARAMETERS Project number Sub project no Project Enterprise Site Area Cell Unit Related equipment Service P&ID/Reference dwg number Material name Maximum pressure Minimum temperature Normal temperature Maximum temperature Material phase Maximum fluid velocity

THERMOWELL OR PROTECTING TUBE Construction type Shank style Process conn nominal size Rating Process conn termn type Style Internal conn nom size Style Cap/Plug style Bore diameter Outside dia at support Outside diameter at tip Insertion length “U” Lagging extension lg “T” Thermowell/Tube material Sheath material-thickness Cap/Plug material

EXTENSION ASSEMBLY Extension type Extension length Nipple-union nom size Rating Nipple pipe schedule no Nipple material Union/Coupling material

CONNECTION HEAD Housing type Cover style CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT TEST Test pressure

COMPONENT TYPE

Date

Revision Description

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

6 7 8 9 10

CONNECTION HEAD continued Element conn nominal size Style Signal conn nominal size Style Enclosure type no/class Grounding terminal lct Enclosure material Terminal block material Terminal material

PERFORMANCE CHARACTERISTICS Max press at design temp At Min working temperature Max Max fluid velocity limit At temp

ACCESSORIES

SPECIAL REQUIREMENTS Custom tag Reference specification Compliance standard Construction code Calculation report

PHYSICAL DATA Estimated weight Overall length Removal clearance Mfr reference dwg

TEST URV

COMPONENT IDENTIFICATIONS MANUFACTURER

By

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Appv1 Appv2 Appv3

MODEL NUMBER

REMARKS

© 2001 ISA

Form: 20T2501 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Rev

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION

LOAD CELL OR TRANSDUCER Device Specification

BODY OR HOUSING Body/Housing type Construction style Load conn/thru-hole size Load conn termn type Style Load button Body/Housing material Seal/O ring material

SENSING ELEMENT Force sensor type Construction style Rated capacity/stress Rated nominal output Nominal resistance

SIGNAL OR AMPLIFIER Configuration type Output signal type Enclosure type no/class Local adjustment type Signal termination type Supply/Excitation voltage Cert/Approval type Mounting location/type Remote enclosure material

LEAD WIRE AND EXTENSION Extension type Conductor nominal size Cable length Connector configuration Signal termination type Cable jacket material

MOUNTING HARDWARE Hardware type Construction style Surface finish Hardware material Isolation pad material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Weight 1-Output signal Weight 2-Output signal Weight 3-Output signal Weight 4-Output signal Weight 5-Output signal Weight 6-Output signal Weight 7-Output signal Weight 8-Output signal Weight sum-Output signal

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

58 SUMMING UNIT OR JUNCTION BOX 59 Configuration type 60 Enclosure type no/class 61 Max Input signal quantity 62 Cert/Approval type 63 Mounting location/type 64 Enclosure material 65 66 67 PERFORMANCE CHARACTERISTICS 68 Min working temperature Max 69 Accuracy rating Ref 70 Linearity Ref 71 Repeatability Ref 72 Temp compensation LRL URL 73 Overrange limit Ref 74 Temp effect on zero Ref 75 Temp effect on span Ref 76 Life cycles 77 78 79 80 ACCESSORIES 81 Simulated component 82 Mating connector 83 Access ramp 84 Pit frame 85 86 87 88 SPECIAL REQUIREMENTS 89 Custom tag 90 Reference specification 91 Compliance standard 92 Calibration report 93 94 95 96 PHYSICAL DATA 97 Estimated weight 98 Overall length 99 Overall height 100 Outside diameter/Width 101 Signal conn nominal size Style 102 Mfr reference dwg 103 104 INPUT OR TEST OUTPUT LRV URV LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

MANUFACTURER

Revision Description

By

Appv1 Appv2

MODEL NUMBER

Appv3

Form: 20W2211 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

REMARKS

© 2004 ISA

Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 Rev

Project number Project Enterprise Site Area Related equipment Service

OPERATING PARAMETERS Sub project no

P&ID/Reference dwg number Remote hazardous area cl Remote area min ign temp

Cell

Unit

Div/Zone Group Temp ident number

TRANSMITTER OR INDICATOR OR CONTROLLER Housing type Interface style Input sensor/signal type Input excitation style Output signal type Analog output resolution Enclosure type no/class Control mode Local operator interface Characteristic curve Digital communication std Signal power source Aux input signal type Max qty sensor/xdcr/xmtr Signal summing circuit Contacts arrangement Quantity Integral indicator style Display resolution Cert/Approval type Mounting location/type Failure/Diagnostic action Transducer diagnostics Signal filtration Transducer calibration Enclosure material

CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE Weight-Analog output 1 Weight-Analog output 2 Weight-Digital output Weight-Scale 1 Weight-Scale 2 Weight setpoint 1-Output Weight setpoint 2-Output Weight setpoint 3-Output Weight setpoint 4-Output Weight setpoint 5-Output Weight setpoint 6-Output Weight setpoint 7-Output Weight setpoint 8-Output Failure signal-Output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

53 PERFORMANCE CHARACTERISTICS 54 Linearity Ref 55 Repeatability Ref 56 Max input signal 57 Max Resolution 58 Sensitivity Ref 59 Max response time 60 Min ambient working temp Max 61 Contacts ac rating At max 62 Contacts dc rating At max 63 Max sensor to receiver lg 64 65 66 67 68 ACCESSORIES 69 Remote indicator style 70 Remote indicator mounting 71 Remote indicator enclosure 72 Calibrator style 73 74 75 76 SPECIAL REQUIREMENTS 77 Custom tag 78 Reference specification 79 Compliance standard 80 Software configuration 81 Software program 82 83 84 85 PHYSICAL DATA 86 Estimated weight 87 Overall width 88 Overall height 89 Overall depth 90 Signal conn nominal size Style 91 Mfr reference dwg 92 93 94 INPUT OR TEST OUTPUT OR SCALE LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

Revision Description

MANUFACTURER

By

Appv1

Appv2

MODEL NUMBER

Appv3

Form: 20W2221 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

REMARKS

© 2004 ISA

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

RESPONSIBLE ORGANIZATION ELECTRONIC WEIGHT TRANSMITTER INDICATOR OR CONTROLLER Device Specification

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 Rev

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 RESPONSIBLE ORGANIZATION FIELDBUS JUNCTION 6 SPECIFICATION IDENTIFICATIONS 2 7 Document no 3 Device Specification 8 Latest revision Date 4 9 Issue status 5 10 11 OPERATING PARAMETERS 46 PERFORMANCE CHARACTERISTICS 12 Project number Sub project no 47 Min ambient working temp Max 13 Project 48 Maximum input voltage 14 Enterprise 49 Current consumption 15 Site 50 Max current rating 16 Hazardous area cl Div/Zone Group 51 Current limiting Temp ident number 17 Area min ign temp 52    18 53 19 54 20 JUNCTION DEVICE 55 21 Housing type 56 22 Construction style 57 23 Trunk conn nominal size 58 24 Trunk connection type 59 ACCESSORIES 25 Trunk connection style 60 External terminator 26 Spur conn nominal size 61 Mounting hardware 27 Spur connection type 62 Special enclosure 28  Spur connection style 63 Connector cover/cap 29  Circuit protection style 64 Connector lock 30  Enclosure type no/class 65 31  Digital communication std 66 32  Conductor cabling type 67 SPECIAL REQUIREMENTS 33  Spur/Drop quantity 68 Custom tag 34  Grounding configuration 69 Reference specification 35  Integral indicator style 70 Compliance standard 36  Signal termination type 71 37  Cert/Approval type 72 38  Mounting type 73 PHYSICAL DATA 39  Terminator location 74 Estimated weight 40  Transient protection 75 Overall width 41  Enclosure material 76 Overall height 42  Trunk conn/Gland matl 77 Overall depth 43  Spur conn/Gland matl 78 Mfr reference dwg 44  79 45  80 81 TAG NUMBER Area Cell Unit 82  83  84  85  86  87  88  89  90  91  92  93  94  95  96  97  98  99  100  101  102  103 COMPONENT IDENTIFICATIONS 104 COMPONENT TYPE MANUFACTURER MODEL NUMBER 105  106  107  108  109  110  Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS                                 Form: 20Y2511 Rev 0 © 2005 ISA //^:^^#^~^^"~~:~"~

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

FIELDBUS JUNCTION Device Specification Tag Number List Continued

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

Unit

   

   

By        

Appv1 Appv2        

Appv3

REMARKS

© 2005 ISA

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

Cell

6 7 8 9 10

--`,,```,,,,````-`-`,,`,,`,`,,`---

1 RESPONSIBLE ORGANIZATION 2 3 4 5 11 TAG NUMBER Area 12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  57  58  59  60  61  62  63  64  65  66  67  68  69  70  71  72  73  74  75  Rev Date Revision Description         Form: 20Y2512 Rev 0

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 117 118 119 120 121 122 123 124 125 126 127 128 Rev

RESPONSIBLE ORGANIZATION ELECTROMECHANICAL LIMIT SWITCH Device Specification

Project number Project Enterprise Site Area Related equipment Service

OPERATING PARAMETERS Sub project no

Cell

P&ID/Reference dwg number Inline hazardous area cl Inline area min ign temp Minimum temperature Maximum temperature Min required overtravel Maximum travel to operate Actuating material

Unit

Div/Zone Group Temp ident number

SWITCH HOUSING Housing type Construction style Nominal size Enclosure type no/class Mounting location/type Housing material

ACTUATOR Actuator type Actuator style Free position LRL Pre-Travel to operate Total travel Operator type Movement operation mode Lever nominal size Mounting orientation Lever arm material Roller/Rod material Seal material

URL

SWITCH MECHANISM Switch type Contact style Nominal contact rating Output signal type Switch action type Digital communication std Circuitry type Contact arrangement Quantity CALIBRATIONS AND TEST TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST Setpoint 1-Output Setpoint 2-Output Position-Analog output

6 7 8 9 10

SPECIFICATION IDENTIFICATIONS Document no Latest revision Date Issue status

64 SWITCH MECHANISM Continued 65 Integral indicator style 66 Signal termination type 67 Cert/Approval type 68 Time delay type 69 Contact material 70 71 72 LEAD WIRE AND EXTENSION 73 Extension type 74 Conductor nominal size 75 Cable length 76 Connector configuration 77 Signal termination type 78 Cable jacket material 79 80 81 PERFORMANCE CHARACTERISTICS 82 Operating force/torque 83 Repeatability Ref 84 Max over travel limit 85 Max travel to reset 86 Min ambient working temp Max 87 Contacts ac rating At max 88 Contacts dc rating At max 89 Mechanical life cycles 90 Electrical life cycles 91 92 93 94 ACCESSORIES 95 Mating connector 96 Mounting adaptor/base 97 98 99 100 SPECIAL REQUIREMENTS 101 Custom tag 102 Reference specification 103 Compliance standard 104 105 106 107 PHYSICAL DATA 108 Estimated weight 109 Overall width 110 Overall length/height 111 Overall depth 112 Signal conn nominal size Style 113 Mfr reference dwg 114 115 116 INPUT OR SETPOINT OUTPUT LRV URV ACTION LRV URV

COMPONENT IDENTIFICATIONS COMPONENT TYPE

Date

MANUFACTURER

Revision Description

Form: 20Z2011 Rev 0 Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

By

Appv1 Appv2

MODEL NUMBER

Appv3

--`,,```,,,,````-`-`,,`,,`,`,,`---

REMARKS

© 2004 ISA

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

1 RESPONSIBLE ORGANIZATION PROXIMITY SENSOR 6 SPECIFICATION IDENTIFICATIONS 2 7 Document no 3 Device Specification 8 Latest revision Date 4 9 Issue status 5 10 11 OPERATING PARAMETERS 64 SWITCH MECHANISM Continued 12 Project number Sub project no 65 False pulse protection 13 Project 66 Transient protection 14 Enterprise 67 15 Site 68 16 Area Cell Unit 69 LEAD WIRE AND EXTENSION 17 Related equipment 70 Extension type 18 Service 71 Conductor nominal size 19 72 Cable length 20 P&ID/Reference dwg number 73 Connector configuration 21 Inline hazardous area cl Div/Zone Group 74 Signal termination type 22 Inline area min ign temp Temp ident number 75 Cable jacket material 23 Minimum temperature 76 24 Maximum temperature 77 25 Minimum target position 78 PERFORMANCE CHARACTERISTICS 26 Maximum target position 79 Min operating voltage Max 27 Target material 80 Repeatability Ref 28 81 Overload trigger 29 82 Short circuit trigger 30 83 Weld field immunity At 31 SWITCH HOUSING 84 Min ambient working temp Max 32 Housing type 85 Minimum load current 33 Construction style 86 Contacts ac rating At max 34 Nominal size 87 Contacts dc rating At max 35 Enclosure type no/class 88 Max leakage current At 36  Mounting location/type 89 37  Housing material 90 38  91 39  92 ACCESSORIES 40 SENSING ELEMENT 93 Mating connector 41 Sensing type 94 Mounting adaptor 42  Sensor style 95 Mounting bracket 43  Switching frequency 96 Magnetic actuator 44  Nom/max sensing distance 97 45  Shielding style 98 46  Barrel diameter 99 47  Probe insertion length 100 SPECIAL REQUIREMENTS 48  Mounting orientation 101 Custom tag 49  Casing material 102 Reference specification 50  Active face material 103 Compliance standard 51  104 52  105 53 SWITCH MECHANISM 106 54  Switch type 107 PHYSICAL DATA 55  Output signal type 108 Estimated weight 56  Digital communication std 109 Overall width 57  Contact arrangement Quantity 110 Overall length/height 58  Load switching style 111 Overall depth 59  Integral indicator style 112 Threaded length 60 Signal termination type 113 Signal conn nominal size Style 61 Cert/Approval type 114 Mfr reference dwg 62  Field immunity style 115 63 Polarity protection 116 117 CALIBRATIONS AND TEST INPUT OR SETPOINT OUTPUT 118 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV 119 Setpoint 1-Output 120 Setpoint 2-Output 121 Presence-Analog output 122 123 COMPONENT IDENTIFICATIONS 124  COMPONENT TYPE MANUFACTURER MODEL NUMBER 125           126           127           128           Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS                                                                 Form: 20Z2012 Rev 0 © 2004 ISA --`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

1 2 3 4 5 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 Rev

RESPONSIBLE ORGANIZATION

6 SPECIFICATION IDENTIFICATIONS 7 Doc no 8 Latest rev Date 9 Issue status 10 These general or special requirements shall be considered as part of the requirements for the equipment covered by the individual requisition and/or specification sheets. Table of Contents Requirements Page

Date

Revision Description

GENERAL OR SPECIAL REQUIREMENTS

By

Appv1 Appv2 Appv3

REMARKS

--`,,```,,,,````-`-`,,`,,`,`,,`---

© 2001 ISA

Form: 20G3001 Rev 0

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

This page intentionally left blank.

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

– 117 –

ISA–TR20.00.01–2007

Annex C (informative) – Specification forms pick list and contextual help references This annex is included for informational purposes and is not part of this Technical Report. Due to the large size of the pick list files for all of the approved forms, they are not attached to this Technical Report. The latest versions of the pick lists may be viewed and downloaded for free from the ISA website at www.isa.org/standards.

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

This page intentionally left blank.

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\ --`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

Developing and promulgating sound consensus standards, recommended practices, and technical reports is one of ISA’s primary goals. To achieve this goal the Standards and Practices Department relies on the technical expertise and efforts of volunteer committee members, chairmen and reviewers. ISA is an American National Standards Institute (ANSI) accredited organization. ISA administers United States Technical Advisory Groups (USTAGs) and provides secretariat support for International Electrotechnical Commission (IEC) and International Organization for Standardization (ISO) committees that develop process measurement and control standards. To obtain additional information on the Society’s standards program, please write: ISA Attn: Standards Department 67 Alexander Drive P.O. Box 12277 Research Triangle Park, NC 27709 ISBN 10: 1-55617-754-2 ISBN 13: 978-1-55617-754-5

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

STANDARD

Specification Forms for Process Measurement and Control Instruments Part 3: Form Requirements and Development Guidelines

Approved 04 April 2001 TM

ISA–The Instrumentation, Systems, and Automation Society

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

ISA–20.00.03–2001

ISA–20.00.03–2001 Specification Forms for Process Measurement and Control Instruments Part 3: Form Requirements and Development Guidelines ISBN: 1-55617-755-0 Copyright © 2001 by ISA–The Instrumentation, Systems, and Automation Society. All rights reserved. Not for resale. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the prior written permission of the Publisher. ISA 67 Alexander Drive P. O. Box 12277 Research Triangle Park, North Carolina 27709 USA

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

–3–

ISA–20.00.03–2001

Preface This preface, as well as all footnotes and annexes, is included for information purposes and is not part of ISA–20.00.03–2001. The standards referenced within this document may contain provisions that, through reference in this text, constitute requirements of this document. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this document are encouraged to investigate the possibility of applying the most recent editions of the standards indicated within this document. Members of IEC and ISO maintain registers of currently valid International Standards. ANSI maintain registers of currently valid U.S. National Standards. This document has been prepared as part of the service of ISA–The Instrumentation, Systems, and Automation Society, toward a goal of uniformity in the field of instrumentation. To be of real value, this document should not be static but should be subject to periodic review. Toward this end, the Society welcomes all comments and criticisms and asks that they be addressed to the Secretary, Standards and Practices Board; ISA; 67 Alexander Drive; P. O. Box 12277; Research Triangle Park, NC 27709; Telephone (919) 549-8411; Fax (919) 549-8288; E-mail: [email protected]. The ISA Standards and Practices Department is aware of the growing need for attention to the metric system of units in general, and the International System of Units (SI) in particular, in the preparation of instrumentation standards. The Department is further aware of the benefits to USA users of ISA standards of incorporating suitable references to the SI (and the metric system) in their business and professional dealings with other countries. Toward this end, this Department will endeavor to introduce SI-acceptable metric units in all new and revised standards, recommended practices, and technical reports to the greatest extent possible. Standard for Use of the International System of Units (SI): The Modern Metric System, published by the American Society for Testing & Materials as IEEE/ASTM SI 10-97, and future revisions, will be the reference guide for definitions, symbols, abbreviations, and conversion factors.

CAUTION — ISA ADHERES TO THE POLICY OF THE AMERICAN NATIONAL STANDARDS INSTITUTE WITH REGARD TO PATENTS. IF ISA IS INFORMED OF AN EXISTING PATENT THAT IS REQUIRED FOR USE OF THE STANDARD, IT WILL REQUIRE THE OWNER OF THE PATENT TO EITHER GRANT A ROYALTY-FREE LICENSE FOR USE OF THE PATENT BY USERS COMPLYING WITH THE STANDARD OR A LICENSE ON REASONABLE TERMS AND CONDITIONS THAT ARE FREE FROM UNFAIR DISCRIMINATION. EVEN IF ISA IS UNAWARE OF ANY PATENT COVERING THIS STANDARD, THE USER IS CAUTIONED THAT IMPLEMENTATION OF THE STANDARD MAY REQUIRE USE OF TECHNIQUES, PROCESSES, OR MATERIALS COVERED BY PATENT RIGHTS. ISA TAKES NO POSITION ON THE EXISTENCE OR VALIDITY OF ANY PATENT RIGHTS THAT MAY BE INVOLVED IN IMPLEMENTING THE STANDARD. ISA IS NOT RESPONSIBLE FOR IDENTIFYING ALL PATENTS THAT MAY REQUIRE A LICENSE BEFORE IMPLEMENTATION OF THE STANDARD OR FOR INVESTIGATING THE VALIDITY OR SCOPE OF ANY PATENTS BROUGHT TO ITS ATTENTION. THE USER SHOULD CAREFULLY INVESTIGATE RELEVANT PATENTS BEFORE USING THE STANDARD FOR THE USER’S INTENDED APPLICATION.

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

It is the policy of ISA to encourage and welcome the participation of all concerned individuals and interests in the development of ISA standards, recommended practices, and technical reports. Participation in the ISA standards-making process by an individual in no way constitutes endorsement by the employer of that individual, of ISA, or of any of the standards, recommended practices, and technical reports that ISA develops.

ISA–20.00.03–2001

–4–

HOWEVER, ISA ASKS THAT ANYONE REVIEWING THIS STANDARD WHO IS AWARE OF ANY PATENTS THAT MAY IMPACT IMPLEMENTATION OF THE STANDARD NOTIFY THE ISA STANDARDS AND PRACTICES DEPARTMENT OF THE PATENT AND ITS OWNER. ADDITIONALLY, THE USE OF THIS STANDARD MAY INVOLVE HAZARDOUS MATERIALS, OPERATIONS OR EQUIPMENT. THE STANDARD CANNOT ANTICIPATE ALL POSSIBLE APPLICATIONS OR ADDRESS ALL POSSIBLE SAFETY ISSUES ASSOCIATED WITH USE IN HAZARDOUS CONDITIONS. THE USER OF THIS STANDARD MUST EXERCISE SOUND PROFESSIONAL JUDGMENT CONCERNING ITS USE AND APPLICABILITY UNDER THE USER’S PARTICULAR CIRCUMSTANCES. THE USER MUST ALSO CONSIDER THE APPLICABILITY OF ANY GOVERNMENTAL REGULATORY LIMITATIONS AND ESTABLISHED SAFETY AND HEALTH PRACTICES BEFORE IMPLEMENTING THIS STANDARD.

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

NAME

COMPANY

G. Barta, Chairman W. Albe S. Alvarez T. Baldwin N. Battikha E. Berger J. Carew T. Caston B. Cleary K. Cole E. Crawford T. D. Daniel A. Engels G. Erk F. Ford G. Gifford R. Gulley R. Hartman C. Hill H. Hinssen W. Ingham A. Iverson D. Kelly H. Koning M. Kulkarni T. McAvinew A. McCauley J. McQuighan J. Meppen D. Osborn C. Phillips G. Ramachandran G. Richardson J. Rourke P. Rowland G. Sanders M. Scott

Bechtel Corp. Dow Corning Corp. Compania Inspeccion Mexicana Brown & Root, Inc. Bergo Tech, Inc. Mitre Corp. Consultant Eastman Chemicals Co. Rosemount, Inc. Burns & Roe Enterprises Nova Control Systems, Inc. Consultant Praxair, Inc. Consultant Bayer Corp. Flowserve Vara International Fisher-Rosemount Systems, Inc. Brown & Root, Inc. Exxon Chemical Engineering Stantec Consulting Ltd. Ivy Optiks VECO Rocky Mountain, Inc. DSM Services General Instruments Consortium Merrick & Co. Chagrin Valley Controls, Inc. Constellation Energy Y. Meppen Consultants Greeley & Hansen Technip USA Corp. Cytec Industries, Inc. Thermco Instrument Corp. Jacobs Engineering Group SOIGNE Associates, Inc. Penberthy, Inc. Process Measurement Tech. Ltd.

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

The following people served as members of ISA Committee SP20:

–5–

J. Sen R. Shah J. Soos M. Spencer J. Summerfield R. Sundar L. Takeyasu D. Taylor R. Town I. Verhappen E. Welch B. Williams

ISA–20.00.03–2001

Bechtel Corp. Consultant Huntsman Corp. Desktop Engineering Ltd. Consultant Foster Wheeler USA Corp. Kenonic Controls, Inc. Spartan Controls Jefferson Services Co, Inc. Syncrude Canada Ltd. Duke/Fluor Daniel, Inc. Merck & Co. Inc.

This standard was approved for publication by the ISA Standards and Practices Board on 04 April 2001. COMPANY

M. Zielinski D. Bishop M. Cohen M. Coppler B. Dumortier W. Holland E. Icayan A. Iverson R. Jones V. Maggioli T. McAvinew A. McCauley, Jr. G. McFarland D. Rapley R. Reimer J. Rennie H. Sasajima I. Verhappen R. Webb W. Weidman J. Weiss M. Widmeyer R. Wiegle C. Williams G. Wood

Fisher-Rosemount Systems, Inc. Consultant Consultant Ametek, Inc. Schneider Electric Southern Company Advanced Control & Engineering Solutions Ivy Optiks Dow Chemical Co. Feltronics Corp. Merrick & Co. Chagrin Valley Controls, Inc. Westinghouse Process Control Inc. Rapley Consulting Inc. Rockwell Automation Factory Mutual Research Corp. Yamatake Corp. Syncrude Canada Ltd. Power Engineers Parsons Energy & Chemicals Group EPRI EG&G Defense Materials CANUS Corp. Eastman Kodak Co. Graeme Wood Consulting

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

NAME

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

This page intentionally left blank.

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\ --`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

–7–

ISA–20.00.03–2001

Contents 1

Scope................................................................................................................................................... 13

2

Normative references........................................................................................................................... 13

3

Definitions ............................................................................................................................................ 13

4

Application ........................................................................................................................................... 13

5

Requirements and optional information ............................................................................................... 14

6

7

5.1

Form types, content, and order..................................................................................................... 14

5.2

Form formats ................................................................................................................................ 21

5.3

Form terminology.......................................................................................................................... 22

5.4

Data field content.......................................................................................................................... 22

Preparation of new specification forms ................................................................................................ 22 6.1

Reference sources........................................................................................................................ 23

6.2

Review and modification of Operating Parameters forms ............................................................ 23

6.3

Development guidelines for Device Specification forms ............................................................... 23

6.4

Contextual help instructions.......................................................................................................... 24

6.5

Pick list.......................................................................................................................................... 24

6.6

Data dictionary update.................................................................................................................. 25

6.7

Review and approval .................................................................................................................... 25

Classification and designation.............................................................................................................. 25

Annex A (informative) — References.......................................................................................................... 27

//^:^^#^~^^"~~:~"~$$"~

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

This page intentionally left blank.

–9–

ISA–20.00.03–2001

Foreword This standard has been prepared by ISA’s SP20 standards committee, Instrument Specification Forms. The ISA–SP20 committee welcomes comments and suggestions, and requests that they be addressed to the Chairperson, ISA-SP20, ISA, 67 Alexander Drive, Research Triangle Park, NC 27709 USA. This standard modifies the form style of the previous ISA-20-1981 to provide a dedicated page for operating parameters, and expands the form content beyond the limitations of ISA-20-1981. This standard applies to all processes of development and use of specification forms for process measurement and control instruments. Specifically, it provides requirements and guidance for the development of new or revised forms. The other parts of this series, Specification Forms for Process Measurement and Control Instruments, are as follows: Part 1: General Considerations

ISA Draft 20.00.02

Part 2: Instructions for Using Specification Forms

ISA Draft TR20.00.04

Part 4: Data Dictionary

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

ISA–TR20.00.01–2001

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

This page intentionally left blank.

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

– 11 –

ISA–20.00.03–2001

Introduction Specification forms developed by ISA’s SP20 committee are designed to facilitate communication between instrument specifiers and manufacturers in the exchange of data on standard commercially available instrument devices. They are not intended to be used as a hardware design specification. New devices and options for existing devices continually enter the market and may justify the creation or modification of specification forms. The following are the purposes of these specification form requirements and development guidelines: a) To minimize the effort and duration required to develop and review new forms for ISA approval b) To promote uniformity within a form and between forms in content, format, terminology, and maximum field prompt lengths c) To promote uniformity between form parts by identifying content criteria for operating parameters and device properties d) To assist in the preparation of a complete specification form by identifying device properties that correlate with the operating parameters

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

e) To provide guidance to develop instrument specification forms, field prompt contextual help instructions, and pick lists

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

This page intentionally left blank.

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

– 13 –

1

ISA–20.00.03–2001

Scope

This standard establishes requirements for instrument specification forms to be published by ISA. Its use is recommended for organizations that develop their own equivalent specification forms. The guidelines set forth in this standard will assist in the efficient production of specification forms that maintain consistency and compatibility with ISA specification forms.

2

Normative references

No normative references are required in using this standard. For a list of informative references, see annex A.

3

Definitions

3.1 contextual help: explanation of the field prompt or desired data entry field response. 3.2 data entry field: the specification form area into which data are entered. 3.3 field prompt: the descriptive text on the specification form that identifies the data entry field. 3.4 main device: the fundamental or most important measurement or control device of a composite assembly that contains secondary devices or accessories. 3.5 pick list: a list of example or preferred enumerated choices for a data entry field.

4

Application

Members of standards committees, users or manufacturers, and experts can use their knowledge of particular instrument hardware and this standard to develop new specification forms, provide contextual help instructions, and develop pick lists for filling out the forms. //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

These form requirements and development guidelines may be used for the following: a) To evaluate the adequacy of an existing Operating Parameters specification form for specifying a new hardware device (as per ISA–TR20.00.01–2001) b) To develop new instrument Device Specification forms (as per ISA–TR20.00.01–2001) c) To establish review criteria for new or revised forms seeking approval

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

For the purposes of this standard, the following definitions apply.

ISA–20.00.03–2001

5

– 14 –

Requirements and optional information

5.1

Form types, content, and order

5.1.1

Three form types

The specification forms are generally comprised of three form types for the following information organization: a) Operating Parameters forms are developed to communicate the process variables, operating conditions, process design conditions, component design criteria, material properties, and operating environment conditions of a device’s application. b) Device Specification forms are developed to communicate hardware device requirements and properties for a main device and for attached and directly associated devices. c) The General or Special Requirements form has been developed to communicate the Table of Contents for general or special requirements that are applicable to the device, but that need additional space beyond that available in the other two types of forms. 5.1.2

Content of Operating Parameters forms

Operating Parameters forms are developed to identify the process variables to be measured or controlled, and the related process and environmental parameters that affect the measurement or control objectives. A single form is appropriate for all instrument device types that relate to the identified common measurement variable or final control element. The following information categories are required for these forms, if appropriate for the device type: a) Administrative identifications b) Service identifications c) Component design criteria

e) Process design conditions that are necessary for device type selection f)

Material name, composition, and properties required for calculations, device sizing, or suitability evaluation

g) Environmental operating conditions h) Physical installation data that are required to evaluate the device application. Optional parameters that should be evaluated for inclusion on an Operating Parameters form, or on a supplemental page of the form, include the following: //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

a) Special requirements for the application or hardware device b) Preliminary sizing analysis calculation results that are pertinent to sizing or device type selection

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

d) Material flow condition variables that are necessary to perform sizing calculations or device type selection

– 15 –

ISA–20.00.03–2001

c) Basic engineering design data that identify the environmental and service parameters that the device must operate within d) Detailed material composition data 5.1.3

Content of Device Specification forms

The specific content of any specification form should primarily be dependent only upon the characteristics of the device that are necessary for communication between the specifier and the manufacturer. The intended use of the specification form, such as a document for preliminary inquiry and quotation, a traditional specification, or a conforming specification, can affect how much of the form content is required to be used to accomplish the respective objectives. The general criteria for including a property on a device specification form include the following. 5.1.3.1

Type and style field prompts

Each subsection of the form should start with a “type” field intended to clarify the major classification of that device component. A “style” field is sometimes additionally advantageous to classify component construction. 5.1.3.2

Compliance verification field prompts

Correlated parameter field prompts are required that provide confirmation that the device properties comply with the operating parameter limits that are identified in the specification. Typical field prompt categories that must be considered for inclusion are shown in table 1.

Table 1 — Correlated parameters

5.1.3.3

Operating Parameters form field category

Device Specification form field category

Component design criteria

Performance characteristics

Process design conditions

Design ratings

Measured variable range

Measurement range limits

Calculated operating variables

Working limits

Piping termination properties

Termination properties

Piping materials

Materials of construction

Model designation field prompts

Device manufacturers’ literature generally states their required data for ordering. Field prompts are required to cover those properties by explicitly identifying each of the device attributes that are so identified or used to generate the model number. These field prompts will generally include the following types of properties: a) Model series that identifies the device type or style

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

Device Specification forms are developed to encompass the information required that defines the physical instrument device and the requirements for its immediately associated secondary devices. The secondary device properties may be developed on a supplemental form page.

ISA–20.00.03–2001

– 16 –

b) Nominal size c) Process connection nominal size, category, type, and rating d) Measurement span and range limits e) Calibration or adjustment values f)

Control action

g) Signal power source h) Output signal type and range limits i)

Standard design optional features

j)

Material of construction for pressure boundary components

k) Major material of construction for internal wetted components l)

Mounting type or configuration

m) Enclosure classification n) Standard optional accessories o) Safety certifications, listings, or approvals 5.1.3.4

User-definable fields

Blank field prompts shall be provided in each form subsection to accommodate specifying of the less common device properties. 5.1.3.5

Optional performance characteristics field prompts

Design and device selection reviews often require some device performance characteristics to be provided by the manufacturer in addition to those covered in table 1. 5.1.3.6

Optional construction design alternatives field prompts

Manufacturers are often given responsibility to select device construction alternatives that should ultimately be reviewed for acceptability by the specifier. Those properties that are generally desirable to solicit and document within the specification form include the following: a) Enclosure ratings b) Standard material of construction for pressure boundary components not covered in the basic model number c) Standard material of construction for wetted components not covered in the basic model number d) Standard accessories recommended for the service application e) Optional construction styles or features recommended for the service application

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

– 17 –

5.1.3.7

ISA–20.00.03–2001

Optional special requirements field prompts

Properties for frequently specified special requirements are desirable, such as the following: a) Tag or nameplates b) Preparations c) Construction code or standard d) Calibration or inspection reports //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

5.1.3.8

Optional physical data field prompts

Design and device selection reviews often require some basic device physical data that are advantageous to incorporate in the specification form data, such as the following: a) Estimated weight b) Major dimensions c) Manufacturers' dimensional reference drawing 5.1.3.9

Optional calibrations and tests data field prompts

Documentation of device properties that are used during a maintenance check or replacement is desirable, such as the following: a) Bench set limits b) Rated travel c) Test conditions 5.1.4

Subsection order of Device Specification forms

The properties of instrument devices, and their associated secondary devices, have been data modeled to facilitate consistency of presentation between the properties of devices and between specification forms. The specification form should select the appropriate generic property groupings, and arrange the respective specific subsections in the following recommended order: a) Pressure-containing shell properties b) Pressure-containing shell extension component properties c) Internal subcomponent properties --`,,```,,,,````-`-`,,`,,`,`,,`---

d) Signal input/output extension component properties e) Integral input/output component properties f)

Auxiliary devices properties

g) Performance characteristic properties

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

ISA–20.00.03–2001

– 18 –

h) Accessories properties i)

Special requirements

j)

Physical data properties

k) Calibrations and tests properties l)

Component identifications

5.1.5

Subsection content order of Device Specification forms

The following field prompt order shall be used (as applicable) within any subsection. 5.1.5.1

Assembly or component

a) Type b) Style c) Nominal size 5.1.5.2

Process or end connections

--`,,```,,,,````-`-`,,`,,`,`,,`---

a) Nominal size b) Nominal rating c) Termination category and type d) Finish e) Length and wall thickness f)

Location

g) Taps 5.1.5.3

Part //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

a) Type b) Style c) Quantity d) Dimensions 5.1.5.4

Materials of construction

a) Primary material b) Secondary materials

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

– 19 –

c) Bolting materials d) External treatment material e) End termination material f)

Gasket, packing, and seal materials

g) Accessories material 5.1.5.5

Performance characteristics

a) Design ratings //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

b) Working limits c) Accuracy ratings d) Measuring range limits e) Performance factors f)

Rated coefficients

g) Performance ratings h) Environmental limits --`,,```,,,,````-`-`,,`,,`,`,,`---

i)

Supply limits and consumption

j)

Signal and communication limits

5.1.5.6

Accessory hardware

a) Style b) Nominal size c) Standard options d) Material of construction e) Model number 5.1.5.7

Special requirements

a) Custom tag or nameplate b) Referenced specification identification c) Special preparation d) Design compliance standard

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

ISA–20.00.03–2001

ISA–20.00.03–2001

– 20 –

e) Construction code identification f)

Calculation requirement

g) Calibration report h) Software configuration i)

Certification or approvals documentation

j)

Special inspection

5.1.5.8

Physical data

a) Weight b) Dimensions c) Signal connection d) Manufacturer's dimensional reference drawing 5.1.5.9

Calibrations and tests

a) Measurement range values b) Control action c) Signal range limits d) Setpoint values e) Test values 5.1.5.10

Component identifications

a) Component tag number b) Component type c) Style d) Manufacturer e) Composite model number Content of General or Special Requirements form

--`,,```,,,,````-`-`,,`,,`,`,,`---

The General or Special Requirements form, which is optional, has been developed to provide a form for attached requirements that cannot be adequately described in the Operating Parameters or Device Specification forms. The first sheet of this form shall contain a note referencing the requirements as part of the specification, and a Table of Contents of the general or special requirements. The same specification form identification header, revision chronicle, and remarks footer subsections used on the Operating

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

5.1.6

– 21 –

ISA–20.00.03–2001

Parameters or Device Specification forms shall be included. Subsequent pages may use the same or a different format as appropriate for the attached references. 5.2

Form formats

5.2.1

Two form formats

ISA specification forms are provided in one of two format types: single main device format or multiple similar main devices formats. The quantity of the required operating parameters information will generally determine the format type that is appropriate for a specific device specification. 5.2.1.1

Single main device format

There shall be only one main device per specification form. The form may include attached and directly associated secondary devices. 5.2.1.2

Multiple similar main device format

Similar main devices can share a common hardware specification form and utilize a separate tabulation sheet to identify the variable data and unique tags. 5.2.2

Printing format

The page format has been established to readily accommodate typical printer capabilities and minimize the pages required to accommodate the identified required content. The printing style shown on the ISA example specification forms has been chosen for convenience of determining the maximum available prompt and data field lengths. Alternate printing styles may be used if they produce the same results as the following listed page format. 5.2.2.1

Page size

The page size shall be 8½ inches by 11 inches, or A4 size. 5.2.2.2

Columnar presentation

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

The form shall use multiple parallel columns of field prompts and data entry fields, with the following field or text area sizes (identified in characters), and the desired text alignments within the fields: Size

Text Area Description

Text Alignment

3

Column for line number

Right

2

Column for revision identification field

Left

25

Column for field prompt area

Left

25 (maximum)*

Data entry field(s)

Left

1

Space between a data entry field and its unit symbol field

1 (minimum)

Space between a data entry field and a subsequent field prompt

* The data entry fields are generally limited to 25 total characters, but selected exceptions have been made for special conditions that require more characters.

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

ISA–20.00.03–2001

5.2.2.3

– 22 –

Data grouping

Related data shall be grouped as defined in this standard, and a text line shall contain the title for the group. 5.2.2.4

Top margin and print

The top margin shall be a minimum of one line or the printer’s minimum capability. The maximum required lines of printing shall be 84. 5.2.2.5

Left margin

The left margin shall be a minimum of 0.6 inch to allow for hole punches. 5.2.3

Numbering system format

5.2.3.1

Page size

There shall be unique line numbers for each form part. These unique numbers serve as references to specific field prompts and data entry fields. 5.2.3.2

Consecutive line numbers within a part

The line numbers that correspond to the field prompts within a subgroup shall be consecutive. 5.3

Form terminology

Field prompts from the ISA Draft TR20.00.04 (see annex A) master list shall be used whenever possible. If new field prompt terms are necessary, they shall be listed and submitted for approval by ISA for inclusion in the ISA Draft TR20.00.04 master listing. 5.4

Data field content

Field prompts should be constructed to require only a single parameter for the data entry field response. Compound parameter responses would generally require complex help instructions, and a large pick list to cover all possible combinations of the individual properties. Unit symbols relating to numeric data should be placed in separate fields to facilitate enumerated value pick list and data conversion to alternate units.

6

Preparation of new specification forms

The specification forms are developed to reflect the data required for the selection and definition of standard, commercially available instrument devices. The methodology for developing the forms encompasses the application of this standard’s requirements while examining reference sources and the guidelines presented in this section.

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

The same field prompt terminology shall be used throughout all forms, sections, or subsections of a form to designate a given property. Use of an alternate term (synonym) for a concept already defined shall be avoided.

– 23 –

6.1 6.1.1

ISA–20.00.03–2001

Reference sources Specification forms

The collection, whenever they are available, of similar specification forms from the following sources will facilitate the development of new forms: a) ISA forms for similar instruments developed in accord with this standard b) ISA forms from ISA-20-1981 or other ISA standards c) Standards organizations such as the International Electrotechnical Commission, Fluid Controls Institute, American Petroleum Institute, American Society of Mechanical Engineers, and Institute of Electrical and Electronics Engineers d) Instrument manufacturers and vendors e) Other form users such as those from engineering and construction firms or end-user engineering departments 6.1.2

Reference documents

The gathering, whenever they are available, of the following types of applicable terminology-related reference documents may facilitate the development of specification forms: a) ISA device-associated standards, recommended practices, and technical reports; and the ISA Dictionary of Measurement and Control b) Related standards from organizations such as the International Electrotechnical Commission, Fluid Controls Institute, American Petroleum Institute, American Society of Mechanical Engineers, and Institute of Electrical and Electronics Engineers c) Manufacturers’ device specifications and associated technical literature

6.2

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

d) Technical publications that contain sizing calculation methods or selection criteria Review and modification of Operating Parameters forms

The appropriate measured variable or final device Operating Parameters form will generally be adequate for new or revised devices, but must be checked against the requirements in 5.1.2. Identify and incorporate any necessary revisions that must be made to the existing Operating Parameters form. 6.3 6.3.1

Development guidelines for Device Specification forms Specification identification header and footer

The Operating Parameters and Device Specification forms have been developed with fixed specification identification headers and footers. These shall be duplicated for new forms. 6.3.2

Component identification subsection

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

--`,,```,,,,````-`-`,,`,,`,`,,`---

Device Specification forms have been developed with fixed component identifications subsections. This shall be duplicated for new forms.

Not for Resale

ISA–20.00.03–2001

6.3.3

– 24 –

Main device subsections

The main measurement or control device attributes generally can be subdivided into subsections. Determine if such subsection groupings exist for the device under consideration and establish the corresponding device-specific titles for those subsections. 6.3.4

Main device subsection development and review

The form’s format can be most easily implemented by editing an existing form for a similar instrument. Examine numerous manufacturers’ products literature and identify their required device property data for specifying the device or component, while encompassing the following: a) This standard’s content requirements identified in 5.1.3 b) The field prompt order identified in 5.1.5 c) The terminology from ISA Draft TR20.00.04 (see annex A) for terms not present on the example form being edited There will generally be more field prompt candidates, based on the above criteria, than can be accommodated on the form. The criteria may need to be prioritized and compromised to fit page limitations. The user-definable field prompts required in each subsection and the notes subsections will generally provide the flexibility to accommodate most applications. 6.3.5

Secondary device inclusion

The decision of when to include in the form the specification of an attached or directly associated device should consider the following: a) Forms should provide for attached equipment that is commonly used and available as a standard option by most manufacturers b) A supplemental page can be developed to provide for less commonly used attached or directly associated devices, such as has been provided for the control valves specification form c) If it is desirable to have a second supplier provide the directly associated device, a separate form for the device should be produced 6.4

Contextual help instructions

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

The contextual help instructions should clarify the field prompt’s context or definition and, preferably, be applicable to all devices using that field prompt. Therefore, the only new contextual help instructions that should need development will occur when new field prompts are added to ISA Draft TR20.00.04 (see annex A). 6.5

Pick list

Review of manufacturers’ literature and ISA Draft TR20.00.04 (see annex A) should be made to determine the adequacy of the existing list to cover the new device. Unit symbols should be provided in both US Customary and SI systems, and equivalent dimensions provided when available. New prompts should be based on terminology from reference documents such as those identified in 6.1.2.

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

– 25 –

6.6

ISA–20.00.03–2001

Data dictionary update

If ISA Draft TR20.0.04 (see annex A) does not contain adequate terms for the device specification under development, any proposed new data dictionary terms shall be submitted for approval along with the new or revised form. 6.7

Review and approval

After completing the form development with this standard’s requirements and guidelines, circulate the preliminary form for review by peers and manufacturers. Consolidate the comments and send the proposed form to the Chairperson of ISA-SP20 as a request for interpretation of standards, for the proposed new or revised form, as an addendum or future revision to ISA–TR20.00.01–2001.

7

Classification and designation

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

Hardware device forms are grouped and numbered based upon the device’s measurement principles or control functions. Consult ISA–TR20.00.01–2001, table A.1 or table A.2, when tentatively assigning new device categories, form numbers, and titles.

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

This page intentionally left blank.

--`,,```,,,,````-`-`,,`,,`,`,,`---

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

– 27 –

ISA–20.00.03–2001

Annex A (informative) — References This annex is included for informational purposes and is not part of this standard. At the time of publication, the editions or drafts indicated below were valid. All standards, recommended practices, and technical reports are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions or drafts of the documents indicated below. ISA ISA–TR20.00.01–2001

Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations

ISA Draft 20.00.02

Specification Forms for Process Measurement and Control Instruments Part 2: Instructions for Using Specification Forms

ISA Draft TR20.00.04

Specification Forms for Process Measurement and Control Instruments Part 4: Data Dictionary

Available from:

ISA–The Instrumentation, Systems, and Automation Society 67 Alexander Drive PO Box 12277 Research Triangle Park, NC 27709 USA Tel: (919) 990-9200 www.isa.org

ANSI ANSI X3.50-1986 (R1997)

Representations for U.S. Customary, SI, and Other Units to Be Used in Systems with Limited Character Sets

Available from:

American National Standards Institute nd 11 West 42 Street New York, NY 10036 USA Tel: (212) 642-4900 www.ansi.org

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

ISA–20.00.03–2001

– 28 –

ASME ASME Y1.1-1989

Abbreviations for Use on Drawings and in Text

Available from:

ASME 3 Park Avenue New York, NY 10016-5990 USA Tel: (973) 882-1167 www.asme.org

IEC 60050-351 (1998-09)

International Electrotechnical Vocabulary - Part 351: Automatic Control

Available from:

IEC 3, rue de Varembe PO Box 131 1211 Geneva 20 Switzerland Tel: 41 22 734 0150 www.iec.ch

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

International Organization for Standardization (ISO) ISO/CD 10303-221

Library of Classes for Process Plant Application Protocols

Available from:

ISO 1, rue de Varembe PO Box 56 1211 Geneva 20 Switzerland Tel: 41 22 749 0111 www.iso.ch

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

--`,,```,,,,````-`-`,,`,,`,`,,`---

International Electrotechnical Commission (IEC)

This page intentionally left blank.

--`,,```,,,,````-`-`,,`,,`,`,,`---

//^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale

ISA is an American National Standards Institute (ANSI) accredited organization. ISA administers United States Technical Advisory Groups (USTAGs) and provides secretariat support for International Electrotechnical Commission (IEC) and International Organization for Standardization (ISO) committees that develop process measurement and control standards. To obtain additional information on the Society’s standards program, please write: ISA Attn: Standards Department 67 Alexander Drive P.O. Box 12277 Research Triangle Park, NC 27709

ISBN: 978-1-93756-000-3

Copyright International Society of Automation Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Not for Resale //^:^^#^~^^"~~:~"~$$"~$^"#:*~"#@^#~"@"~~*:#*:^$:$~:*"\\

--`,,```,,,,````-`-`,,`,,`,`,,`---

Developing and promulgating sound consensus standards, recommended practices, and technical reports is one of ISA’s primary goals. To achieve this goal the Standards and Practices Department relies on the technical expertise and efforts of volunteer committee members, chairmen and reviewers.