Is Codes for Civil Engineers

IS CODES -CIVIL(Strl.)

VKMEHTA

MAIN CODES 

CODE OF PRACTICE FOR PLAIN & REINFORCE CONCRETE IS:456-2000



CODE OF PRACTICE FOR GENERAL CONSTRUCTION IN STEEL IS:800-2007



CODE OF PRACTICE FOR DESIGN LOADS IS:875 PART 1 TO 5



CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES : IS:1893 (PART-1 & PART -4)

CODES FOR FOUNDATION DESIGN 

CODE OF PRACTICE FOR DESIGN &CONSTRN. OF PILE FOUNDATIONS IS:2911.



CODE OF PRACTICE FOR STRUCTURAL SAFETY OF BLDGS - SHALLOW FOUNDATIONS IS:1904.



CODE OF PRACTICE FOR DESIGN & CONSTN. OF RAFT FOUNDATIONS IS:2950



CODE OF PRACTICE FOR DESIGN & CONSTN. OF MACHINE FOUNDATIONS IS:2974.

RCC DESIGN 

CRITERIA FOR BLAST RESISTANT DESIGN OF STRUCTURES( FOR EXPLOSIONS ABOVE GROUND ) IS:4991.



EARTHQUAKE EARTHQUAKE RESISTANT DESIGN & CONSTN. OF BUILDINGS IS:4326.



C.O.P. DUCTILE DETAILING OF R.C. CONCRETE STRUCTURES STRUCTURES S. T. SEISMIC FORCES IS:13920.



C.O.P. FOR CONCRETE STRUCTURES FOR  STORAGE OF LIQUIDS IS:3370.



CRITERIA FOR DESIGN OF RCC CHIMNEYS IS:4998.

STEEL STRUCTURAL DESIGN 

USE OF COLD FORMED LIGHT GAUGE STEEL STRL. MEMBERS IN GENERAL BUILDING CONSTRUCTION IS:801.C.O.P. FOR USE OF STRL. STEEL IN OVERHEAD TRANSMISSION LINE TOWERS IS:802.



COP FOR USE OF STEEL TUBES IN GENERAL BUILDING CONSTRUCTION

IS:806.



C.O.P. FOR USE OF METAL ARC WELDING W ELDING FOR  WELDING GENERAL CONSTRUCTION IS:816.



C.O.P. FOR DESIGN & CONSTRUCTION CONSTRUCTION OF STEEL CHIMNEY IS:6533

IS STANDARD PUBLICATIONS CONCRETE 

SP-16 DESIGN AIDS FOR REINFORCED CONCRETE TO IS 456-1978.



SP-22 EXPLANATORY HANKBOOK ON CODE FOR EARTHQUAKE.



SP-24 EXPLANATORY HANKBOOK ON CODE FOR PLAIN &REINFORCED CONCRETE IS456:1978.



SP-34 HANK BOOK ON CONCRETE REINFORCEMENT & DETAILING.



BIS SPECIAL PUBLICATIONS STRL STEEL SP6(1 TO 7) 

6.1 STRL STEEL SECTIONS.



6.2 DESIGN OF BEAMS & GIRDERS.



6.3 DESIGN OF COLUMNS



6.4 DESIGN OF BOLTS.



6.5 LIGHT GAUGED SECTION.



6.6 PLASTIC DESIGN



6.7 SIMPLE WELDED GIRDERS.



SP-38 HANKBOOK OF TYPIFIED DESIGN OF ROOF TRUSSES



SP-40 STEEL PORTAL FRAMES

NATIONAL BUILDING CODE OF INDIA 2005 PROVISION OF ALL BUILDING RELATED CODES

•

INTERWOVEN INTO SINGLE CODE. FIRE & SAFETY

•

BUILDING MATERIAL

•

STRUCTURAL DESIGN ASPECTS STRUCTURAL

•

•

•

•

FOUNDATION RCC STRUCTURE STEEL

SERVICES( AIRCONDITIONIN AIRCONDITIONING/ESCALATOR/LIFT G/ESCALATOR/LIFT AIRCONDITIONING/ESCALATOR/LIFT /PLUMBING / LANDSCAPING ETC) •

ATTACHMENTS

IS 875:-DESIGN LOADS FOR BLDGS.& STR. (OTHER THAN SEISMIC) 

PART 1 DEAD LOADS



PART 2 IMPOSED LOADS



PART 3 WIND LOADS



PART 4 SNOW LOADS



PART 5 SPECIAL LOADS & LOAD COMBINATIONS. 

TEMPERATURE EFFECTS



HYDROSTATIC & SOIL PRESSURE.



STRUCTURE SAFETY DURING CONSTRCUTION



ACCIDENTAL LOADS.



LOAD COMBINATIONS

1893 :CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES 

PART 1(2002) fifth Revision 



PART 2* 



BRIDGES & RETAINING WALLS

PART 4(2005) 



LIQUID RETAINING TANKS(GROUND & ELEVATED).

PART 3* 



GENERAL PROVISION IN BUILDINGS.

INDUSTRIAL STRUCTURE INCLUDING CHIMNEY

PART 5* DAMS & EMBANKMENTS * to be issued?

IS 3370:-LIQUID RETAINING STRUCTURES



PART 1 GENERAL



PART 2 RCC



PART 3 PRESTRESSED



PART 4 DESIGN TABLES

IMPOSED LOADS AS PER EIL DESIGN BASIS 





Process Building/Technological Building/Technological Structure (Open/Enclosed type) 

Operating area

-

5.0 kN/m2



Maintenance area

-

7.5 kN/m2

Com  pressor House/TG house Compressor 

Operating area

-

7.5 kN/m2



Maintenance area

-

7.5 kN/m2

Substation/Control Room 

Panel floor 

-

10.0 kN/m2

FIGURE 1 OF IS875 PART 3

SPEED VARIES FROM 33 TO 55M/S

SEISMIC ZONE OF INDIA

!!!!

THANK YOU!