Intze Principle

February 12, 2018 | Author: vinod_comment | Category: N/A
Share Embed Donate


Short Description

This document details about the intze tank principle...

Description

4/11/2015

Intze Principle ­ Wikipedia, the free encyclopedia

Intze Principle From Wikipedia, the free encyclopedia

The Intze Principle (German: Intze­Prinzip) is the name given to two different engineering principles. Both are named after the hydraulic engineer, Otto Intze, (1843–1904). In the one case, the Intze Principle relates to a type of water tower; in the other, a type of dam.

Contents 1 Intze Principle for water towers 2 Intze Principle for dams 3 See also 4 References 5 External links

Intze Principle for water towers A water tower built in accordance with the Intze Principle has a brick shaft on which the water tank sits. The base of the tank is fixed with a ring anchor (Ringanker) made of iron or steel, so that only vertical, not horizontal, forces are transmitted to the tower. Due to the lack of horizontal forces the tower shaft does not need to be quite as solidly built.[1] This type of design was used in Germany between 1885 and 1905. Water tanks designed on the Intze Principle  

 

Salbke Water Tower built to the Intze Principle

Intze 1 tank

Intze 1 tank with inside Intze 2 tank cylinder

Intze Principle for dams https://en.wikipedia.org/wiki/Intze_Principle

1/3

4/11/2015

Intze Principle ­ Wikipedia, the free encyclopedia

The method of dam construction invented by Otto Intze was used in Germany at the end of the 19th and beginning of the 20th centuries. A dam built on the Intze Principle has the following features: it is a gravity dam with an almost triangular cross­section the wall is made of rubble stone with a high proportion of mortar it has a curved ground plan it has facing brickwork (Vorsatzmauerwerk or Verblendung)

Intze wedge

on the upper part of the upstream side it has an earth embankment against the lower part of the upstream side, the so­called Intze Wedge (Intze­Keil)[2] it has a cement­sealed upstream face, coated with a layer of bitumen or tar it has internal vertical drainage using clay pipes behind the upstream face

See also List of dams in Germany

References 1.  "zagermann.de ­ Wassertürme: Bauformen" (http://www.zagermann.de/proj/waturm/baufrmn.html). zagermann.de. Retrieved 9 March 2015. 2.  "Ruhrverband: Technische Angaben" (http://www.ruhrverband.de/fluesse­ seen/talsperren/moehnetalsperre/technische­angaben/). ruhrverband.de. Retrieved 9 March 2015.

External links Otto Intze and water tower construction (http://watertowers.de/Bauformen­deutsch.htm) Otto Intze and dam construction (http://www.oih.rwth­aachen.de/WOHNHEIM/otto_intze.html) Intze tanks at wassertuerme.gmxhome.de (http://www.wassertuerme.gmxhome.de/Beh%E4lter.html) Retrieved from "http://en.wikipedia.org/w/index.php?title=Intze_Principle&oldid=650667556" Categories:  Hydraulic engineering Water towers Dams This page was last modified on 9 March 2015, at 21:39. Text is available under the Creative Commons Attribution­ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a non­profit organization. https://en.wikipedia.org/wiki/Intze_Principle

2/3

4/11/2015

https://en.wikipedia.org/wiki/Intze_Principle

Intze Principle ­ Wikipedia, the free encyclopedia

3/3

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF