Instrument GE
Short Description
Download Instrument GE...
Description
SIZE
DWG NO
A4
381A6409
Item Devices PID
Item TG
0425 20AA-1
0983
0425 20AB-1
0922
0417 20CB-1
1071
0424 20CF-1
0601
0418 20FG-1
1019
0418 20FL-1
1019
0424 20PF-100
0961
0477 20PG-1
0918
0477 20PG-2
0918
0477 20PL-1
0918T
0421 20TU-1
0605
0418 20TV-1
1019
0442 20TW-1
0953
0442 20TW-2
0983
0442 20TW-3
0953
0422 20VG-1
0911
0477 20VG-2
0918
0462 20WN-2
A035
0462 20WN-4
A035
0425 23AB-1
1047
0436 23BT-1
Encl.
0436 23BT-2
Encl.
0421 23CR-1
0603
0421 23CR-2
0603
0421 23CR-3
0603
0436 23HA
1137
SH
16
REV
A
Designation Solenoid valve for VA18-1 control. Characteristics: Normal : 1 to 3 open ; 2 closed. 35 W | 125 VDC Solenoid valve for VA22-1 control. Characteristics: Normal : 1 to 3 open ; 2 closed. 35 W | 125 VDC Compressor Bleed Solenoid Valve Characteristics: Normal : B to C Open ; A closed Fuel pump clutch solenoid Characteristics: Normal : NO 160W(max) | 100-125VDC Gas fuel stop valve solenoid Characteristics: Normal: NO Liquid fuel stop gas solenoid Characteristics: Normal : NO purge fuel liquid solenoid valve Characteristics : Normal : port OH4 closed Solenoid valve for VA13-1 control. Characteristics: Normal : 1 to 3 open ; 2 closed. 35 W | 125 VDC Settings: A Needle-Valve is installed upstream of 20PG-1 in order to adjust VA13-1 Time Opening at 30 seconds. Solenoid valve for VA13-2 control. Characteristics: Normal : 1 to 3 open ; 2 closed. 35 W | 125 VDC Settings: A Needle-Valve is installed upstream of 20PG-1 in order to adjust VA13-1 Time Opening at 30 seconds. Solenoid valve for VA19-1 control. Characteristics: Normal : 1 to 3 open ; 2 closed. 35 W | 125 VDC Torque Converter Fill / Drain Solenoid Valve Characteristics: Normal : NC Turbine compressor IGV solenoid valve Characteristics: Normal : NO Motor Valve Off-Line Compressor Water Wash Characteristics: 92 W | 115 VAC | 50/60 Hz | 1 PH | Fail safe to close Motor Valve Turbine Water Wash Characteristics: 230 W | 115 VAC | 50/60 Hz | 1 PH | Fail safe to close Motor Valve On-Line Compressor Water Wash Characteristics: 92 W | 115 VAC | 50/60 Hz | 1 PH | Fail safe to close Fuel Gaz Vet solenoid Valve Characteristics: Normal : NO 125 VDC Vent Solenoid Valve of inter-valve cavity VA13-1 and VA13-2. Characteristics: Normal : NO 125 W | 125 VDC Solenoïd valve for Water injection transfer valve VC5-1 Characteristics : Normal : NC Solenoïd valve for Water Injection Control valve VC4-1 Characteristics : Normal : NO Motor space heater for 88AB-1 Characteristics: 50 W | 230 VAC | 50 Hz | 1 PH | Anti-condensation heater for motor 88BT-1 Characteristics: 0,05 kW | 230 VAC | 50 Hz | 1 PH | Anti-condensation heater for motor 88BT-2 Characteristics: 0,05 kW | 230 VAC | 50 Hz | 1 PH | Cranking Motor Space Heater Characteristics: 180 W | 230 VAC | 50 Hz | 1 PH | Cranking Motor Space Heater Characteristics: 180 W | 230 VAC | 50 Hz | 1 PH | Cranking Motor Space Heater Characteristics: 180 W | 230 VAC | 50 Hz | 1 PH | Accessory compartment heater Characteristics: 18 kW | 230 VAC | 50 Hz | 1 PH | GENERAL ELECTRIC COMPANY
g DRAWN
GE Energy Products - Europe
SIZE
CAGE CODE
DWG NO
381A6409
A4
M. JEZEQUEL
SECTION 01E SCALE
Ç
SHEET
16
SIZE
DWG NO
A4
381A6409
Item Devices PID
Item TG
0434 23HQ-1
0628
0436 23HT
Encl.
0416 23QT-1
0938
0416 23QT-2
0938
0421 23TG-1
0603
0417 23TK-1
1233
0417 23TK-2
1233
0436 23VG-1
1643
0436 23VG-2
1643
0462 23WN-1
A035
0421 26CR-1
0603
0421 26CR-2
0603
0421 26CR-3
0603
0436 26HA
1137
0436 26HT
Encl.
0415 0415 0415 0415
1121 1121 1121 1121
28FD-10 28FD-11 28FD-4 28FD-5
0436 33BT-1
Encl.
0436 33BT-2
Encl.
0417 33CB-1
1022
0417 33CB-2
1022
0417 33CB-3
1022
0417 33CB-4
1022
0424 33FL-1
0511
0424 33FL-2
0511
0424 33PF-1 0424 33PF-2
0961 0961
0477 33PG-1
0918
SH
17
REV
A
Designation Heater hydraulic oil pump motor Characteristics: 0,05 kW | 230 VAC | 50 Hz | 1 PH | Acoustic TG enclosure Heater Characteristics: 18 kW | 230 VAC | 50 Hz | 1 PH | Immersion heater Lube Oil Tank Characteristics: 10,2 kW | 400 VAC | 50 Hz | 3 PH | Immersion heater Lube Oil Tank Characteristics: 10,2 kW | 400 VAC | 50 Hz | 3 PH | Turning Gear Motor Space Heater Characteristics: - kW | 230 VAC | 50 Hz | 1 PH | Anti-condensation heater for motor 88TK-2 Characteristics: - kW | 230 VAC | 50 Hz | 1 PH | Anti-condensation heater for motor 88TK-2 Characteristics: - kW | 230 VAC | 50 Hz | 1 PH | Motor space heater for 88VG-1 Characteristics: 0,05 kW | 230 VAC | 50 Hz | 1 PH | Motor space heater for 88VG-2 Characteristics: 0,05 kW | 230 VAC | 50 Hz | 1 PH | Anti-condensation heater for motor 88WN-1 Characteristics: 0,05 kW | 230 VAC | 50 Hz | 1 PH | Stator Winding High Temperature Sensor - Ph1 Characteristics: Non linear RTD type - 2 stable states Stator Winding High Temperature Sensor - Ph2 Characteristics: Non linear RTD type - 2 stable states Stator Winding High Temperature Sensor - Ph3 Characteristics: Non linear RTD type - 2 stable states Thermostat, lower temperature in accessory compartment Characteristics: Normal : NO measure range : 2 to 50C° (35,6 to 122°F) Thermostat, low temperature in acoustic enclosure Characteristics: Normal : NO measure range : 2 to 50C° (35,6 to 122°F) Flame detector Flame detector Flame detector Flame detector GT enclosure ventilation damper limit switch Characteristics: Normal : NO Settings: damper open : limit switch activated and contact closed GT enclosure ventilation damper limit switch Characteristics: Normal : NO Settings: damper open : limit switch activated and contact closed 11 stage compressor Bleed Valve Limit Switch Characteristics: Normal : NO Settings: Valve open : limit switch activated, contact closed 11 stage compressor Bleed Valve Limit Switch Characteristics: Normal : NO Settings: Valve open : limit switch activated, contact closed 11 stage compressor Bleed Valve Limit Switch Characteristics: Normal : NO Settings: Valve open : limit switch activated, contact closed 11 stage compressor Bleed Valve Limit Switch Characteristics: Normal : NO Settings: Valve open : limit switch activated, contact closed Liquid fuel stop valve limit switch (bc) Characteristics: Normal: NO Settings: Valve closed : switch actuated, contact closed Liquid fuel stop valve limit switch Characteristics: Normal: NO Settings: Valve opened : switch actuated, contact closed purge fuel liquid valve limit switch VP-1 purge fuel liquid valve limit switch VP-2 VA13-1 Close Position Limit Switch. Characteristics: Normal: NO Settings: Valve closed : switch actuated, contact closed. GENERAL ELECTRIC COMPANY
g DRAWN
GE Energy Products - Europe
SIZE
CAGE CODE
DWG NO
381A6409
A4
M. JEZEQUEL
SECTION 01E SCALE
Ç
SHEET
17
SIZE
DWG NO
A4
381A6409
Item Devices PID
Item TG
0477 33PG-2
0918
0477 33PG-3
0918
0477 33PG-4
0918
0421 33TC-1
0605
0421 33TM-5
0605
0421 33TM-6
0605
0436 33VG-1
Encl.
0422 33VG-11
0911
0436 33VG-2
Encl.
0462 33WN-1
A035
0462 33WN-3
A035
0462 33WN-6
A035
0462 33WN-7
A035
0415 39V-1A
1218
0415 39V-1B
1218
0415 39V-2A
1218
0415 39V-3A
1218
0415 39V-3B
1218
0415 39VS-11
0235
0415 39VS-12
0235
0415 39VS-31
1160
0415 39VS-32
1160
0426 43CP-1
Encl.
0426 43CP-2
Encl.
0426 43CP-3
Encl.
0426 43CP-4
Encl.
0426 43CP-5
Encl.
SH
18
REV
A
Designation VA13-1 Open Position Limit Switch. Characteristics: Normal: NO Settings: Valve open : switch actuated, contact closed VA13-2 Close Position Limit Switch. Characteristics: Normal: NO Settings: Valve closed : switch actuated, contact closed. VA13-2 Open Position Limit Switch. Characteristics: Normal: NO Settings: Valve open : switch actuated, contact closed Torque Converter Solenoid Valve Limit Switch Characteristics: Normal : NO Settings: Switch activated with 20TU-1 de energized - Contact closed Torque Converter Low Torque Limit Switch Settings: Setup at 2 tr (range 0-31 tr) Torque Converter High Torque Limit Switch Settings: Setup at 28 tr (range 0-31 tr) Load compartment ventilation damper limit switch Characteristics: Normal : NO Settings: damper open : limit switch activated and contact closed Limit Switch on Solenoid Valve 20VG-1 Characteristics: See specifications Settings: Valve open :limit switch activated and contact closed Load compartment ventilation damper limit switch Characteristics: Normal : NO Settings: damper open : limit switch activated and contact closed VC4-1 control valve limit switch Characteristics: Normal: NO Settings: Switch actuated and contact closed when control valve full open VC5-1 transfer valve limit switch Characteristics: Normal: NO Settings: Switch actuated and contact closed when control valve full open VC4-1 control valve limit switch Characteristics: Normal: NO Settings: Switch actuated and contact closed when control valve full closed VC5-1 transfer valve limit switch Characteristics: Normal: NO Settings: Switch actuated and contact closed when control valve full closed Vibration Sensor Characteristics: For 25,4 mm/s (1 in/s), 150 ± 4,5 mV peak Vibration Sensor Characteristics: For 25,4 mm/s (1 in/s), 150 ± 4,5 mV peak Vibration Sensor Characteristics: For 25,4 mm/s (1 in/s), 150 ± 4,5 mV peak Vibration Sensor Characteristics: For 25,4 mm/s (1 in/s), 150 ± 4,5 mV peak Vibration Sensor Characteristics: For 25,4 mm/s (1 in/s), 150 ± 4,5 mV peak Vibration Sensor Settings: -10,5 ± 0,5 VDC Vibration Sensor Settings: -10,5 ± 0,5 VDC Vibration Sensor Settings: -10,5 ± 0,5 VDC Vibration Sensor Settings: -10,5 ± 0,5 VDC Break glass unit accessory compartment Characteristics: Normal : NO Break glass unit GT compartment Characteristics: Normal : NO Break glass unit accessory compartment Characteristics: Normal : NO Break glass unit GT compartment Characteristics: Normal : NO Break glass unit load compartment Characteristics: Normal : NO GENERAL ELECTRIC COMPANY
g DRAWN
GE Energy Products - Europe
SIZE
CAGE CODE
DWG NO
381A6409
A4
M. JEZEQUEL
SECTION 01E SCALE
Ç
SHEET
18
SIZE
DWG NO
A4 Item PID 0424 0442 0442
Devices 43FUOP 43TW-1/PB 43TW-2/PB
381A6409 Item TG 1103 1105 1105
0426 45FA-1A
1104
0426 45FA-1B
1104
0426 45FA-2A
1104
0426 45FA-2B
1104
0426 45FT-1A
1103
0426 45FT-1B
1103
0426 45FT-2A
1154
0426 45FT-2B
1154
0426 45FT-3A
1154
0426 45FT-3B
1154
0426 45FT-8A
1160
0426 45FT-8B
1160
0426 45FT-9A
1160
0426 45FT-9B
1160
0474 45HA-1
Encl.
0474 45HA-2
Encl.
0474 45HA-3
Encl.
0474 45HA-4
Encl.
0474 45HA-5
Encl.
0474 45HA-6
Encl.
0474 45HT-1
Encl.
0474 45HT-2
Encl.
0474 45HT-3
Encl.
0474 45HT-4
Encl.
0474 45HT-5
Encl.
0474 45HT-6
Encl.
0426 5E-1
1104
0426 5E-2
1104
0424 63FL-2
0926
SH
19
REV
A
Designation valve VP-1 and VP-2 push button Off-Line Water Wash Push button Turbine Water Wash Push button Thermostatic fire detector Accessory compartment Characteristics: Normal : NO Closed : 163 ± 14°C (325 ± 25°F) Thermostatic fire detector Accessory compartment Characteristics: Normal : NO Closed : 163 ± 14°C (325 ± 25°F) Thermostatic fire detector Accessory compartment Characteristics: Normal : NO Closed : 163 ± 14°C (325 ± 25°F) Thermostatic fire detector Accessory compartment Characteristics: Normal : NO Closed : 163 ± 14°C (325 ± 25°F) Thermostatic fire detector Turbine compartment Characteristics: Normal : NO Closed : 316 ± 14°C (600 ± 25°F) Thermostatic fire detector Turbine compartment Characteristics: Normal : NO Closed : 316 ± 14°C (600 ± 25°F) Thermostatic fire detector Turbine compartment Characteristics: Normal : NO Closed : 316 ± 14°C (600 ± 25°F) Thermostatic fire detector Turbine compartment Characteristics: Normal : NO Closed : 316 ± 14°C (600 ± 25°F) Thermostatic fire detector Turbine compartment Characteristics: Normal : NO Closed : 316 ± 14°C (600 ± 25°F) Thermostatic fire detector Turbine compartment Characteristics: Normal : NO Closed : 316 ± 14°C (600 ± 25°F) Thermostatic fire detector Load compartment Characteristics: Normal : NO Closed : 385 ± 14°C (725 ± 25°F) Thermostatic fire detector Load compartment Characteristics: Normal : NO Closed : 385 ± 14°C (725 ± 25°F) Thermostatic fire detector Load compartment Characteristics: Normal : NO Closed : 316 ± 14°C (600 ± 25°F) Thermostatic fire detector Load compartment Characteristics: Normal : NO Closed : 316 ± 14°C (600 ± 25°F) Gas detector Gas Auxiliary compartment Characteristics: Range : 0 - 20% LEL Gas detector in Auxiliary Compartment Characteristics: Range : 0 - 20% LEL Gas detector Gas in Auxiliary Compartment. Characteristics: Range : 0 - 20% LEL Gas detector Gas in Gas cabinet Module. Characteristics: Range : 0 - 20% LEL Gas detector Gas in Gas cabinet Module. Characteristics: Range : 0 - 20% LEL Gas detector Gas in Gas cabinet Module. Characteristics: Range : 0 - 20% LEL Gas detector Turbine Compartment Characteristics: Range : 0 - 20% LEL Gas detector Turbine Compartment Characteristics: Range : 0 - 20% LEL Gas detector Turbine Compartment Characteristics: Range : 0 - 20% LEL Gas detector Turbine Compartment ventilation duct Characteristics: Range : 0 - 20% LEL Gas detector Turbine Compartment ventilation duct Characteristics: Range : 0 - 20% LEL Gas detector Turbine Compartment ventilation duct Characteristics: Range : 0 - 20% LEL Emergency Stop Button accessory compartment Characteristics: Normal : NC Emergency Stop Button accessory compartment Characteristics: Normal : NC Liquid fuel pressure upstream of stop valve Characteristics: NORMAL: NO Settings: DEC opened = 35 ± 1 psig INC closed = 40 ± 2 psig
GENERAL ELECTRIC COMPANY
g DRAWN
GE Energy Products - Europe
SIZE
CAGE CODE
DWG NO
381A6409
A4
M. JEZEQUEL
SECTION 01E SCALE
Ç
SHEET
19
SIZE
DWG NO
A4
381A6409
Item Devices PID
Item TG
0434 63HF-1
0926
0418 63HG-1
0926
0418 63HG-2
0926
0418 63HG-3
0926
0418 63HL-1
0926
0418 63HL-2
0926
0418 63HL-3
0926
0434 63HQ-1
0926
0424 63LF-3
0992
0477 63PG-1
0918
0477 63PL-21
0918T
0416 63QA-2
0926
0416 63QQ-1
0926
0416 63QQ-8
0916
0416 63QT-2A
ALT.
0416 63QV-1
0926
0417 63TK-1
A053
SH
20
REV
A
Designation Hyd.filter diff. press. alarm Characteristics: Normal : NC Settings: Inc open at 4,13 ± 0,2 bar (60 ± 3 psi) Dec close at 2,75 ± 1,03 bar (40 ± 15 psi) Hydraulic Trip Oil Pressure sw gas stop valve Characteristics: Normal: NO Settings: Dec. Open : 1,40 ± 0,07 bar (20 ± 1 psi) (For Information Inc. Close : 1,65 ± 0,14 bar (24 ± 2 psi)) Hydraulic Trip Oil Pressure sw gas stop valve Characteristics: Normal: NO Settings: Dec. Open : 1,40 ± 0,07 bar (20 ± 1 psi) (For Information Inc. Close : 1,65 ± 0,14 bar (24 ± 2 psi)) Hydraulic Trip Oil Pressure sw gas stop valve Characteristics: Normal : NO Settings: Dec. Open : 1,40 ± 0,07 bar (20 ± 1 psig) (For Information Inc. Close : 1,65 ± 0,14 bar (24 ± 2 psi)) Hydraulic Trip Oil Pressure - Liquid Fuel System Characteristics: Normal : NO Settings: (For Information Inc. Close : 1,65 ± 0,14 bar (24 ± 2 psi)) Dec. Open : 1,40 ± 0,07 bar (20 ± 1 psi) Hydraulic Trip Oil Pressure - Liquid Fuel System Characteristics: Normal : NO Settings: (For Information Inc. Close : 1,65 ± 0,14 bar (24 ± 2 psi)) Dec. Open : 1,40 ± 0,07 bar (20 ± 1 psi) Hydraulic Trip Oil Pressure - Liquid Fuel System Characteristics: Normal : NO Settings: (For Information Inc. Close : 1,65 ± 0,14 bar (24 ± 2 psi)) Dec. Open : 1,40 ± 0,07 bar (20 ± 1 psi) Low hydraulic supply press. aux hydl. pump start Characteristics: Normal : NO Settings: Inc closed at 100 ± 3,1 bar (1450 ± 45 psi ) Dec open at 93 ± 1,7 bar (1350 ± 25 psi) Fuel filter differential pressure alarm Characteristics: NORMAL: NC Settings: INC opened = 15 ± 1 psi Pressure switch on VA13-1 & VA13-2 intervalves space. Characteristics: Normal: NC Settings: Increase open at 3,10 ± 0,13 bar (45 ± 2 psi) For information, decrease close at 2,75 ± 0,13 bar (45 ± 2 psi) Pressure switch on liquid fuel purge air. Characteristics: Normal: NO Settings: Increase close at 7 ± 0,25 bar (101 ± 4 psi) For information decrease open at 5,6 ± 0,25 bar (81 ± 4 psi). Low Lube Oil Pressure Alarm Characteristics: Normal : NO Settings: Dec. Open : 2,8 ± 0,07 bar (40,6 ± 1 psig) (For Information : Inc. Close : 3,1 ± 0,14 bar ( 45 ± 2 psig)) Differential pressure switch Main Lube Oil Filter Characteristics: Normal : NC Settings: Inc. Open : 1,03 ± 0,068 bar (15 ± 0,1 psig) (For Information : Dec. Close : 0,9 ± 0,2 bar (13 ± 3 psig)) Torque converter filter differencial pressure Characteristics: Normal : NC Settings: Inc. Open : 1,5 ± 0,2 bar (21,75 ± 3 psi) Low Lube Oil Pressure generator side Characteristics: Normal : NO Settings: Dec. Open : 0,55 ± 0,021 bar (8 ± 0,3 psig) (For Information : Inc. Close :0,62 ± 0,035 bar (9 ± 0,5 psig)) Oil mist eliminator filter high pressure drop alarm Characteristics: Normal : NC Settings: Inc. open : 80 ± 3 mbar (1,16 ± 0,04 psi) Turbine shell and exhaust frame blower discharge pressure switch Characteristics: Normal : NO Settings: Closed above 15 ± 3 inch H2O
GENERAL ELECTRIC COMPANY
g DRAWN
GE Energy Products - Europe
SIZE
CAGE CODE
DWG NO
381A6409
A4
M. JEZEQUEL
SECTION 01E SCALE
Ç
SHEET
20
SIZE
DWG NO
A4
381A6409
Item Devices PID
Item TG
0417 63TK-2
A053
0436 63VL 0424 65FP 0422 65GC
0533 0541
0416 71QH-1
1038
0416 71QL-1
1038
0424 77FD-1
0992
0424 77FD-2
0992
0424 77FD-3
0992
0415 77HT-1
0546
0415 77HT-2
0546
0415 77HT-3
0546
0415 77NH-1
0546
0415 77NH-2
0546
0415 77NH-3
0546
0415 77RP-11
0235
0462 77WN-1T3
A035
0425 88AB-1
1047
0436 88BT-1
Encl.
0436 88BT-2
Encl.
0421 88CR-1
0603
0424 88FM
0613
0436 88HA
1137
0434 88HQ-1
0628
0436 88HT
Encl.
0416 88QA-1
1006
0416 88QE-1
1007
0416 88QV-1
A098
0421 88TG-1
0538
0417 88TK-1
1233
0417 88TK-2
1233
SH
21
REV
A
Designation Turbine shell and exhaust frame blower discharge pressure switch Characteristics: Normal : NO Settings: Closed above 15 ± 3 inch H2O Gas cabinet ventilation pressure switch Characteristics: Normal : NO Settings: increase close at 25 ± 3 mm CE Liquid fuel pump (by pass valve) servo valve Gas control valve servo valve High level lube oil tank Characteristics: Normal : NC Settings: Incr. open on high level. See lube oil schematic MLItem 416 for setting Low level lube oil tank Characteristics: Normal : NO Settings: Decr. open on low level. See lube oil schematic MLItem 416 for setting Flow divider magnetic pickup Settings: Gap : 0,20 ± 0,02 mm (0,0078 ± 0,00078 in) Flow divider magnetic pickup Settings: Gap : 0,015 ± 0,002 in Flow divider magnetic pickup Settings: Gap : 0,015 ± 0,002 in Speed Sensor Settings: Air-gap : 1,27 ± 0,127 mm (0,05 ± 0,005 inch) Speed Sensor Settings: Air-gap : 1,27 ± 0,127 mm (0,05 ± 0,005 inch) Speed Sensor Settings: Air-gap : 1,27 ± 0,127 mm (0,05 ± 0,005 inch) Speed Sensor Settings: Air-gap : 1,27 ± 0,127 mm (0,05 ± 0,005 inch) Speed Sensor Settings: Air-gap : 1,27 ± 0,127 mm (0,05 ± 0,005 inch) Speed Sensor Settings: Air-gap : 1,27 ± 0,127 mm (0,05 ± 0,005 inch) Vibration Sensor Settings: -10,5 ± 0,5 VDC Water injection common circuit flow pick-up Settings: 0 ± 0,05 V = 0 GPM 10 ± 0,05 V = 130 GPM Atomizing air booster motor Characteristics: 15 kW | 2925 rpm | 400 VAC | 50 Hz | 3 PH | Cooling air fan motor - Acoustic enclosure Characteristics: 15 kW | 1460 rpm | 400 VAC | 50 Hz | 3 PH | Cooling air fan motor - Acoustic enclosure Characteristics: 15 kW | 1460 rpm | 400 VAC | 50 Hz | 3 PH | Electrical Cranking Motor Characteristics: 1000 kW | 2975 rpm | 6,6 kV | 50 Hz | 3 PH | Flow divider starting motor Characteristics: 0,37 kW | 1400 rpm | 400 VAC | 50 Hz | 3 PH | Air Fan of Accessory compartment heater (auxiliary) hydraulic supply pump motor Characteristics: 15 kW | 2925 rpm | 400 VAC | 50 Hz | 3 PH | Air Fan of Acoustic TG enclosure Heater Auxiliary Lube oil pump motor Characteristics: 90 kW | 3000 rpm | 400 | 50 Hz | 3 PH | Emergency Lube Oil Pump Motor Characteristics: 7,5 kW | 1750 rpm | 125 V | - Hz | DC | Lube Oil Mist Eliminator Motor Characteristics: 7,5 kW | 3000 rpm | 400 VAC | 50 Hz | 3 PH | Turning Gear Electrical Motor Characteristics: 30 kW | 725 rpm | 400 VAC | 50 Hz | 3 PH | Settings: Not applicable Turbine Exhaust Frame Cooling Fan Vent Motor Characteristics: 45 kW | 2900 rpm | 400 VAC | 50 Hz | 3 PH | Turbine Exhaust Frame Cooling Fan Vent Motor Characteristics: 45 kW | 2900 rpm | 400 VAC | 50 Hz | 3 PH |
GENERAL ELECTRIC COMPANY
g DRAWN
GE Energy Products - Europe
SIZE
CAGE CODE
DWG NO
381A6409
A4
M. JEZEQUEL
SECTION 01E SCALE
Ç
SHEET
21
SIZE
DWG NO
A4
381A6409
Item Devices PID
Item TG
0421 88TM-1
0605
0436 88VG-1
Encl.
0436 88VG-2
Encl.
0436 88VL-1
1605
0436 88VL-2
1605
0462 88WN-1
A035
0422 0469 0462 0415 0415
90SR-1 90TV-1 90WN-1 95SP-13 95SP-14
0541 0540 A035 1214 1214
0415 95TR-13
1213
0415 95TR-14
1213
0425 96AD-1
0926
0492 96AP-1A
0559
0492 96AP-1B
0559
0492 96AP-1C
0559
0417 96CD-1C
0557
0492 96CS-1
0559
0422 96FG-2A
0557
0422 96FG-2B
0557
0422 96FG-2C
0557
0422 96FG-3
0557
0422 96GC-1,2
0509
0416 96QA-2
0926
0416 96QT-2A
ALT.
0422 96SR-1,2
0507
0421 96TM-1
0605
0469 96TV-1
0548
0469 96TV-2
0548
SH
22
REV
A
Designation Torque adjuster drive motor Characteristics: 1,5 kW | 3000 rpm | 400 VAC | 50 Hz | 3 PH | Cooling air fan motor Load compartment. Characteristics: 7,5 kW | 1450 rpm | 400 VAC | 50 Hz | 3 PH | Cooling air fan motor Load compartment. Characteristics: 7,5 kW | 1450 rpm | 400 VAC | 50 Hz | 3 PH | Cooling air fan motor - Gas compt. Characteristics: 3 kW | - rpm | 400 VAC | 50 Hz | 3 PH | Cooling air fan motor - Gas compt. Characteristics: 3 kW | - rpm | 400 VAC | 50 Hz | 3 PH | Water injection syst. Pump motor Characteristics: 90 kW | 3000 rpm | 400 VAC | 50 Hz | 3 PH | Speed ratio/stop valve servo valve Inlet Guide Vane Servovalve Servovalve for VC5-1 control valve Spark plug Spark plug Ignition transformer for 95SP-13 Characteristics: 345 VA | 230 VAC | 15 kV | 0,35 kW Ignition transformer for 95SP-14 Characteristics: 345 VA | 230 VAC | 15 kV | 0,35 kW Atomizing air main compressor differential pressure transmitter Settings: 4 ± 0.05 mA for 0 bar 20 ± 0.05 mA for 6 bar (87 psi) Pressure transmitter Settings: 4 mA ± 0,02 mA for 0,800 bar (23,6 in of Hg), 20 mA ± 0,10 mA for 1,200 bar (35,4 in of Hg) Pressure transmitter Settings: 4 mA ± 0,02 mA for 0,800 bar (23,6 in of Hg), 20 mA ± 0,10 mA for 1,200 bar (35,4 in of Hg) Pressure transmitter Settings: 4 mA ± 0,02 mA for 0,800 bar (23,6 in of Hg), 20 mA ± 0,10 mA for 1,200 bar (35,4 in of Hg) Compressor Discharge Pressure Transmitter Settings: 4 ± 0.05 for 0 bar ( 0 psi ) 20 ± 0.05 for 21 bar ( 304.5 psi ) Pressure transmitter Settings: 4 mA ± 0,02 mA for 0,0000 bar, 20 mA ± 0,10 mA for 0,0274 bar (11 in of H2O) Fuel Gaz inter-valve Pressure Transmitter Settings: 0 ± 0,05V for 0 bar (0 psi) 5 ± 0,05 V for 34,5 bar (500 psi) Fuel Gaz inter-valve Pressure Transmitter Settings: 0 ± 0,05V for 0 bar (0 psi) 5 ± 0,05 V for 34,5 bar (500 psi) Fuel Gaz inter-valve Pressure Transmitter Settings: 0 ± 0,05V for 0 bar (0 psi) 5 ± 0,05 V for 34,5 bar (500 psi) Exhaust Pressure Transmitter Settings: 4 ± 0,05 mA for 0 bar ( 0 psi) 20 ± 0,1 mA for 35 bar (510 psi) Gas control valve LVDT Settings: 0,7 ± 0,01 VAC for 0 mm Lube Oil header Pressure transducer Settings: 4 ± 0,05 mA for 0 bar (0 psi) 20 ± 0,1mA for 7 bar (101,5 psi) Header end Lube Oil Pressure transducer Settings: 4 ± 0,05 mA for 0 bar (0 psi) 20 ± 0,1mA for 5 bar (72,51 psi) Stop Ratio Fuel Gaz (VSR-1) LVDT Settings: 0.7 ± 0,01 VAC for 0 mm Torque Converter IGV Position Transmitter Settings: 4 ± 0,05 for 0 tr 20 ± 0,05 for 31 tr Inlet Guide Vane LVDT Settings: 0,7 ± 0,01 VAC for 34° Inlet Guide Vane Actuator LVDT (Linear variable displacement transmitter) Settings: 0,7 ± 0,01 VAC for 34°
GENERAL ELECTRIC COMPANY
g DRAWN
GE Energy Products - Europe
SIZE
CAGE CODE
DWG NO
381A6409
A4
M. JEZEQUEL
SECTION 01E SCALE
Ç
SHEET
22
SIZE
DWG NO
A4
381A6409
Item Devices PID
Item TG
0415 96VC-11
0235
0415 96VC-12
0235
0462 96WN-1
A035
0462 96WN-3
A035
0462 96WN-4
A035
0425 AAT-1A
0637
0425 AAT-2A
0637
0434 AH1-1
0502
0434 AH1-2
0502
0436 AT-LC-1
0637
0436 AT-TC-1
0637
0462 AW-1
A035
0415 BT-J1-1A,1B
0235
0415 BT-J1-2A,2B
0235
0415 BT-J2-1A,1B
0235
0415 BT-J2-2A,2B
0235
0415 BT-J3-1A,1B
0235
0415 BT-J3-2A,2B
0235
0415 BT-TA1-2A,2B
0235
0415 BT-TA1-5A,5B
0235
0415 BT-TA1-8A,8B
0235
0415 BT-TI1-2A,2B
0235
0415 BT-TI1-5A,5B
0235
0415 BT-TI1-9A,9B
0235
0425 CA1
0607
0425 CA2
1047
0415 CT-DA-1
0637
0415 CT-DA-2
0637
SH
23
REV
A
Designation Vibration Sensor Settings: -10,5 ± 0,5 VDC Vibration Sensor Settings: -10,5 ± 0,5 VDC water injection skid inlet absolute pressure transmitter Characteristics: 1600 PSI | 0 – 40 PSI to 0 – 800 PSI | -40 to +185 F | 10.5 to 36 V CC | 4 – 20 mA Settings: 4 ± 0,05 mA = 0 bar 20 ± 0,1 mA = 5.5 bar Water injection pump outlet relative pressure transmitter Characteristics: 2030 PSI | 0 – 1000 PSI to 0 – 5996 PSI | -22 to +194 F | 12 to 45 V CC | 4 – 20 mA Settings: 4 ± 0,05 mA = 0 bar 20 ± 0,1 mA = 68,9 bar Water injection pump outlet differential pressure transmitter Characteristics: 2030 PSI | 0 – 166.8 PSI to 0 – 1000 PSI | -22 to +194 F | 12 to 45 V CC | 4 – 20 mA Settings: 4 ± 0,05 mA = 0 bar 20 ± 0,1 mA = 3,45 bar Atomizing air precooler air discharge thermocouple. Characteristics: Type K Atomizing air precooler air discharge thermocouple. Characteristics: Type K Control oil hydraulic accumulator Characteristics: Capacity : 2,5 gal | Nitrogen Settings: 51,7 ± 1 bar (750 ± 15 psi) Control oil hydraulic accumulator Characteristics: Capacity : 2,5 gal | Nitrogen Settings: 51,7 ± 1 bar (750 ± 15 psi) Load compartment temperature Characteristics: PT100 | 100 ohms at 0°C | 0,385 ohm / °C | Turbine compartment temperature Characteristics: PT100 | 100 ohms at 0°C | 0,385 ohm / °C | Water injection common circuit accumulator-hale Characteristics: Capacity : 0,264 gal Settings: Precharge : 435 psig Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Main atomizing air compressor. Characteristics: Centrifugal | 2,7kg/s | 6500 rpm Booster Atomizing Air Compressor. Characteristics: Volumetric | 510m3/h | 6200 rpm Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K GENERAL ELECTRIC COMPANY
g DRAWN
GE Energy Products - Europe
SIZE
CAGE CODE
DWG NO
381A6409
A4
M. JEZEQUEL
SECTION 01E SCALE
Ç
SHEET
23
SIZE
DWG NO
A4
381A6409
Item Devices PID
Item TG
0415 CT-IF-1
0637
0415 CT-IF-2
0637
0477 0425 0477 0462
0918T 0983 1015 A035
FA3-1 FA4-1 FA6-1 FA90-1
0424 FD1-1
0613
0424 0424 0434 0434 0424 0469 0422 0417
FF2-1 FF2-2 FH2-1 FH2-2 FH3-1 FH6-1 FH7-1 Filtre
1024 1051 1051 0992 0548 0911 0909
0462 FM1-1
A035
0462 FW1-1 0462 FW2-1 0462 FW3-1
A035 A035 A035
0421 HM1
0605
0469 HM3-1
0548
0425 HX1-1
1003
0416 LT-B1D-1A,1B
0637
0416 LT-B2D-1A,1B
0637
0416 LT-B3D-1A,1B
0637
0416 LT-BT1D-1A,1B
0637
0416 LT-G1D 0416 LT-G2D
ALT./ GEN. ALT./ GEN.
0416 LT-OT-1A
0938
0416 LT-OT-2A
0938
0416 LT-TH-1A,1B
0637
0416 LT-TH-2A,2B
0637
0416 LT-TH-3A,3B
0637
0422 MG1
0512
0424 PF1
0611
0434 PH1
0627
0434 PH2
0628
0462 PW1-1 0417 Separateur
A035 0931
0426 SLI-1
1104
0426 SLI-1A
Encl.
SH
24
REV
A
Designation Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Liquid fuel purge air filter. Atomizing air actuation air filter. Filter on actuation air of fuel gas purge air valves. Strainer on control air supply circuit Flow divider Characteristics: Volumetric | 883 l/min | 1650 Hz | 1650 tr/min HP fuel filter HP fuel filter Hydraulic supply filter Hydraulic supply filter Hydraulic supply filter-liquid fuel servo IGV controller assembly hydraulic oil supply filter Servo hydraulic supply filter of Gas fuel control & stop valve control air Filter 1” air supplied from Compressor discharge Water injection common flow meter Characteristics: Flow range : 16 to 130 GPM Water injection system low pressure strainer Water injection system main filter High pressure strainer downstream flow meter water injection Torque Converter and Reversing Gear Characteristics: Driven at 3000 rpm approximatively Actuator assembly, Inlet Guide Vane System Settings: Actuator operation limits : 32° to 86° Atomizing air precooler. Lube Oil Thermocouple #1 Bearing Drain Characteristics: Type K Lube Oil Thermocouple #2 Bearing Drain Characteristics: Type K Lube Oil Thermocouple #3 Bearing Drain Characteristics: Type K Lube Oil Thermocouple #1 Bearing Drain Characteristics: Type K Lube Oil Thermocouple generator #1 Bearing Drain Characteristics: Type K Lube Oil Thermocouple generator #2 Bearing Drain Characteristics: Type K Lube oil tank resistance temperature detector Characteristics: Type K Lube oil tank resistance temperature detector Characteristics: Type K Lube oil temperature turbine header thermocouple Characteristics: Type K Lube oil temperature turbine header thermocouple Characteristics: Type K Lube oil temperature turbine header thermocouple Characteristics: Type K Gas fuel nozzle Main fuel Pump Characteristics: Volumetric | 870.5 l/min | 68.9 bar | 1550 tr/min Main hydraulic supply pump Characteristics: Volumetric – positive displacement 65 l/min (17,1 GPM) |105 bar (1500 psi) | 1422 tr/min (1422 RPM) Auxiliary hydraulic supply pump Characteristics: Volumetric 45,4 l/min (12 GPM) | 105 Bar (1500 psi) |1450 tr/min (1450 RPM) Water injection centrifugal fixed speed pump Air Cleaner Light warning accessory compartment Characteristics: 230 VAC-50/60 Hz Fire alarm : flashing light unit Characteristics: 24VDC GENERAL ELECTRIC COMPANY
g DRAWN
GE Energy Products - Europe
SIZE
CAGE CODE
DWG NO
381A6409
A4
M. JEZEQUEL
SECTION 01E SCALE
Ç
SHEET
24
SIZE
DWG NO
A4
381A6409
Item Devices PID
Item TG
0426 SLI-1B
Encl.
0426 SLI-1C
Encl.
0426 SLI-2
1104
0426 SLI-2C
Encl.
0426 SLI-3C
Encl.
0415 TT-IB-1
0637
0415 TT-WS1A0-1
0637
0415 TT-WS1A0-2
0637
0415 TT-WS1FI-1
0637
0415 TT-WS1FI-2
0637
0415 TT-WS2A0-1
0637
0415 TT-WS2A0-2
0637
0415 TT-WS2F0-1
0637
0415 TT-WS2F0-2
0637
0415 TT-WS3A0-1
0637
0415 TT-WS3A0-2
0637
0415 TT-WS3F0-1
0637
0415 TT-WS3F0-2
0637
0415 TT-XD-1
0623
0415 TT-XD-10
0623
0415 TT-XD-11
0623
0415 TT-XD-12
0623
0415 TT-XD-13
0623
0415 TT-XD-14
0623
0415 TT-XD-15
0623
0415 TT-XD-16
0623
0415 TT-XD-17
0623
0415 TT-XD-18
0623
0415 TT-XD-19
0623
0415 TT-XD-2
0623
0415 TT-XD-20
0623
0415 TT-XD-21
0623
SH
25
REV
A
Designation Fire alarm : flashing light unit Characteristics: 24VDC Fire alarm : horn and flashing light unit load Characteristics: 24VDC Light warning accessory compartment Characteristics: 230 VAC-50/60 Hz Fire alarm : horn and flashing light unit load Characteristics: 24VDC Fire alarm : horn and flashing light unit load Characteristics: 24VDC Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K GENERAL ELECTRIC COMPANY
g DRAWN
GE Energy Products - Europe
SIZE
CAGE CODE
DWG NO
381A6409
A4
M. JEZEQUEL
SECTION 01E SCALE
Ç
SHEET
25
SIZE
DWG NO
A4
381A6409
Item Devices PID
Item TG
0415 TT-XD-22
0623
0415 TT-XD-23
0623
0415 TT-XD-24
0623
0415 TT-XD-3
0623
0415 TT-XD-4
0623
0415 TT-XD-5
0623
0415 TT-XD-6
0623
0415 TT-XD-7
0623
0415 TT-XD-8
0623
0415 TT-XD-9
0623
0477 VA13-1
0918
0477 VA13-2
0918
0424 VA17-1
1026
0424 VA17-2
1026
0424 VA17-5
1026
0425 VA18-1
1070
0477 VA19-1
0918T
0417 VA2-1
1022
0417 VA2-2
1022
0425 VA22-1
0922
0417 VA2-3
1022
0417 VA2-4
1022
0434 VAB1 0434 VAB2
0947 0947
0424 VC3-1
0516
0462 VC4-1
A035
0462 VC5-1
A035
0424 VCK1-1T14
0961
0477 VCK2-1T14
0918T
0434 VCK3-1 0434 VCK3-2
0947 0947
0417 VCK7-1
1233
0417 VCK7-2
1233
SH
26
REV
A
Designation Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Thermocouple Characteristics: Type K Gas fuel purge air valve. Characteristics: Normal: NC Gas fuel purge air valve. Characteristics: Normal: NC False start drain valve-combustion wrapper Settings: Normal : NO False start drain valve-exhaust frame Settings: Normal : NO False start drain valve-exhaust plenum Characteristics: Normal : NO Atomizing air compressor by pass valve. Characteristics: Normal: NC Liquide fuel purge air valve. Characteristics: Normal : C to L opened ; U closed Compressor Bleed valve 11th stage Characteristics: Normal : NO Compressor Bleed valve 11th stage Characteristics: Normal : NO Booster atomizing air compressor isolating valve. Characteristics: Normal: NO Compressor Bleed valve 11th stage Characteristics: Normal : NO Compressor Bleed valve 11th stage Characteristics: Normal : NO Hydraulic system air bleed valve (main) Hydraulic system air bleed valve (aux.) By pass control valve Characteristics: Normal : NO Stroke : 1,125 in Water injection flow control valve primary circuit Characteristics: Normal: NC Big flow manifold water injection transfer valve Characteristics: Normal: NC Liquid fuel nozzle check valve Characteristics: Normal: NC Cracking press : 8,27 ± 0,34 Bar (120 ± 5 psig) Liquid fuel nozzle purge air check valve. Characteristics: Normal: NC Cracking pressure 0.34 ± 0.07 bar (4.93 ± 1 psi). Hydraulic pump check valve for main pump Hydraulic pump check valve for auxiliary pump Turbine Shell and Exhaust Frame Blower Check Valve Characteristics: Normal : NC Turbine Shell and Exhaust Frame Blower Check Valve Characteristics: Normal : NC GENERAL ELECTRIC COMPANY
g DRAWN
GE Energy Products - Europe
SIZE
CAGE CODE
DWG NO
381A6409
A4
M. JEZEQUEL
SECTION 01E SCALE
Ç
SHEET
26
SIZE
DWG NO
A4
381A6409
Item Devices PID
Item TG
0422 VGC
0509
0422 VH12
0509
0469 VH3-1
0540
0422 VH5
0507
0434 VM4 0424 VP-1 0424 VP-2
1052 0961 0961
0416 VPR2-1
1023
0434 VPR3-1
0627
0477 VPR44-1
0918
0477 VPR44-2
0918
0477 VPR54-1
0918
0462 VPR62-11
A035
0425 VPR68-1
0922
0462 VPR90-1
A035
0462 VPR90-2
A035
0462 VQE-1
A035
0416 VR1
1016
0434 VR21
0947
0434 VR22
0947
0424 VR27
0992
0424 VR4
0992
0424 VS1
0511
0462 VS2-1
A035
0422 VSR
0507
0420 VTR1
1035
0420 VTR2-1
1027
0420 WT-TL-1
0637
0420 WT-TL-2
0637
SH
27
REV
A
Designation Gas control valve Characteristics: Normal : NC stroke maxi : 44,5 ± 0,5 mm VGC trip valve Characteristics: Normal : NO Trip relay, hydraulic, IGV VSR security discharge valve Characteristics: Normal : NO Hydraulic filter transfer valve Fuel liquid purge multiport valve Fuel liquid purge multiport valve Bearing header pressure regulator valve Characteristics: Normal : NC Settings: Set point : 1,72 + 0,13 /-0 bar (25 + 2 /-0 psi) Hydraulic supply pump (PH1) compensator Settings: Setting : 1500 +20/-0 psig Filter pressure regulator on actuation air of gas fuel purge air valve. Settings: 2,3 +0/-0,2 bar (33,35 +0/-2,9 psi) Filter pressure regulator on actuation air of gas fuel purge air valve. Settings: 2,3 +0/-0,2 bar (33,35 +0/-2,9 psi) Filter pressure regulator on actuation air of liquid fuel purge air valve. Settings: 3,27 +1,7/-0 bar (47,5 +2,7/-0 psi) Water injection stop valve pressure regulator Characteristics: Normal : NC Settings: 6,9 ± 0.340 bar (100 ± 4,9 psi) Instrumentation air filter pressure regulator on VA22-1 actuation. Settings: 3,79 ± 0,13 bar (55 ± 2 psi) Water injection VC4-1 transfer valve air pressure regulation Settings: Setting: 2 +0.4/-0 bar Water injection VC5-1 transfer valve air pressure regulation Settings: Setting: 2 +0.4/-0 bar Quick exhaust valve Characteristics: Normal : NC Main lube oil pump pressure relief valve Characteristics: Normal : NC Settings: Opening at 6,89 + 0,13/-0 bar (100 + 2/-0 psi) Main hydraulic supply pump pressure relief valve Settings: 1650 ± 20 psi Auxiliary hydraulic supply pump pressure relief valve Settings: Setting : 1650 ± 20 psig Pressure relief valve on liq. fuel piping Characteristics: Normal: NC Settings: Setting : 6 ± 0,2 bar (87 ± 2,9 psi) Main fuel pump pressure relief valve Characteristics: Normal : NC Settings: Setting : 82,7 ± 1,72 bar (1200 ± 25 psi) Fuel oil stop valve Characteristics: Normal : NC Water injection stop valve Characteristics: Normal : NC Fuel gas stop/speed ratio valve Characteristics: Normal : NC | stroke maxi : 88,67 mm ( 3,5 in) Brg header temperature regulator valve Characteristics: Normal: E to B open, C closed. Settings: Starts to open at Oil T° = 130 ± 3.6 F. Atmg air precooler air discharge temp.rgltr valve Characteristics: Normal: B to E open, C closed. Settings: T° air = 225 ± 3.6 F Resistance thermometer detector Support legs water temperature Characteristics: Platine PT100 | 100 Ohm at 32°F | 0,214 Ohm / °F | -58 to 500 °F Resistance thermometer detector Support legs water temperature Characteristics: Platine PT100 | 100 Ohm at 32°F | 0,214 Ohm / °F | -58 to 500 °F
GENERAL ELECTRIC COMPANY
g DRAWN
GE Energy Products - Europe
SIZE
CAGE CODE
DWG NO
381A6409
A4
M. JEZEQUEL
SECTION 01E SCALE
Ç
SHEET
27
View more...
Comments
