Instructions for Firmware the Device RK3066 and RK3188

Malaysk Custom ROM for RK3066 and RK3188 Head Units. Installation Guide. If you like my ROM and you think that I did not waste a lot of my time for nothing, you can express your appreciation by simply saying “Thank you” Or sending PayPal donations to [email protected] Thank you. Malaysk. *To tell if the ROM is a FUSE or not, the FUSE file will have: update_4_4_4_FUSE_xxx---- in the beginning. Before you get started, be sure you can access to the recovery menu and able to navigate across the menu options. There are two types of installs. If your Head Unit (HU) has never had a Malaysk ‘FUSE’ type ROM or is completely stock from the factory you MUST do a ‘FIRST TIME INSTALLATION’. INSTALLATION’. If you have already installed a Malaysk ‘FUSE’ type ROM and simply wish to update to a newer version you can do an ‘UPDATE’.. There are two ways ‘UPDATE’ ways to do either either an update update or first time installation. installation. Either will work work but the ‘preferable’ ‘preferable’ is the easiest and best way to do it. *It is suggested to not update the MCU image file. MCU is the mapping of the functions of the HU. A different MCU image can change the mapping. If you do, make sure you can obtain your MCU image from somewhere. The file is not readily available in most cases 1|Page

Extract the file on your computer into a folder location and remember the location. Format the MicroSD card under windows as FAT32. Copy the update.img to the MicroSD card. You can copy the instructions and other files, but, the update.img must be in the root of the MicroSD card. Remove your current GPS MicroSD card from you HU GPS slot and place it in a safe place. Insert the update.img MicroSD card into the HU GPS slot.

2|Page

Contents: FIRST TIME INSTALLATION 1. First method (preferable). First time installation of custom Malaysk ROM over stock ROM Hus. Click Here 2. Second method . First time installation Malaysk ROM over stock ROM HUs Click Here

UPDATE INSTALLATION 3. First method (preferable). Updating previous versions of Malaysk ROM with FUSE. Click Here 4. Second method. Updating previous versions of Malaysk ROM with FUSE Click Here

ViPER4Android SETTINGS 5. For Settings, Click Here

Screen Saver and Clock SETTINGS 6. Preparing the GPS MicroSD card for Options, Click Here 6.6 mtc-launcer.ini 6.7 mtc-manager folder 6.8 mtc-music folder

POST INSTALL CONFIGURATIONS 7. Xposed

3|Page

First time installation Malaysk ROM on stock ROM HUs First method (   preferable ) 1.1 Save update.img file on GPS SD card. Insert the SD card into GPS SD card slot BEFORE booting the HU up!! 1.2 Go to Recovery mode menu and select third from the top option Update system/mcu image from sdcard and clear all

1.3 Malaysk ROM installation begins. When the ROM installation finishes, the HU will start booting process. DO NOT WAIT till the boot completes (it will NOT ever completes any way) Go to recovery mode menu and select “Wipe all data/factory and cache reset” option

4|Page

(2) First time installation of Malaysk ROM on stock ROM HUs Second Method  2.1 Save update.img file on GPS SD card. Insert the SD card into GPS SD card slot BEFORE booting the HU up!! 2.2 Go to Settings menu, move to very bottom of the menu, select “About tablet”

2.3

Select “System Updates” 5|Page

6|Page

2.4 Select “Wipe data from the flash” option and click “Install”

2.5 Your HU will reboot and Malaysk ROM installation begins. When the ROM installation finishes, the HU will start booting process. DO NOT WAIT till the boot completes (it will NOT ever complete anyway) Go to recovery mode menu and select “Wipe all data/factory and cache reset” option.

7|Page

(3) Updating previous versions of Malaysk ROM with FUSE 

First method (   preferable )

You will not lose any apps/data or settings 3.1 Save update.img file on GPS SD card. Insert the SD card into GPS SD card slot BEFORE booting the HU up!! 3.2 Go to Settings menu, move to very bottom of the menu, select “About tablet”

3.3

Select “System Updates”

8|Page

3.4 Press “Install” DO NOT check “Wipe data and format flash”

3.5 Your HU will reboot and Malaysk ROM installation begins. When the ROM installation finishes, the HU will start boot process with updated Malaysk ROM. That’s it!

9|Page

(4) Updating previous versions of Malaysk ROM with FUSE  Second method.

You will not lose any apps/data or settings 4.1 Save update.img file on GPS SD card. Insert the SD card into GPS SD card slot BEFORE booting the HU up!! 4.2 Go to recovery menu. Select the second option from the top “Update system/mcu image from sdcard”

4.3 Malaysk ROM installation begins. When the ROM installation finishes, the HU will start boot process with updated Malaysk ROM. Done Enjoy,

Translation from Russian - @comptechltd (Thank you)

10 | P a g e

ViPER4Android Setup

5.1 Under headings of Phone Speaker Set Enable to ON under MASTER POWER and FIREQUALIZER

5.2

Set Enable ON for FIREqualizer

11 | P a g e

5.3

DO NOT TURN ON SPEAKER OPTIMIZATION DISABLED

5.4

Under Select Effect Strength select Extreme

12 | P a g e

5.5

Under Select Preset, Select your preference

13 | P a g e

6. Screen Saver and Clock Setup

6.1

Setting the GPS MicroSD card from your HU

Get your SD card from the GPS in your head unit, and put it in your computer. You will need to copy a file to your app storage area 6.2 If any of the following files or folders are present, delete them. It is unlikely you will find any of these on your SD card if you are installing fresh from either a factory ROM or another non-Malaysk ROM. a. mtc-launcher b. mtc-manager c. mtc-music

6.3 Find your download (make sure you have the right one for your head unit) and extract the files into a folder on your computer. We will call this folder ‘Extract Folder’ for the purpose of these instructions. 6.4 In the ‘Extract Folder’ you will find a folder called ‘Copy_TO_SD_External (GPS Card)’. Inside this folder you will find 2 folders, ‘Copy_TO_SD_External (GPS Card) -- From KM’ and ‘Copy_TO_SD_External (GPS Card) -- From MPH’, this is the time for you to make a choice. 14 | P a g e

If you would like your display in MPH, you will be copying the folders from inside ‘Copy_TO_SD_External (GPS Card) -- From MPH’, Or if you would like your display in KM/h, the you will be copying the folders found inside the ‘‘Copy_TO_SD_External (GPS Card) – From KM’ folder. a. When you navigate to the folder you choose (KM/MPH), inside that folder you will find 3 more folders. i. mtc-launcher ii. mtc-manager iii. mtc-music

b. Copy all 3 of these folders to the root of your GPS SD card 6.5 You are now ready to move to the next section. The root of your SD card should now contain the following files/folders. i. mtc-launcher ii. mtc-manager iii. mtc-music

6.6

mtc-launcher folder

mtc-launcer.ini a. (MPH) [main] speed=speed_gps radio_freq=fmfre # For MPH - remove sign # before speed.divider=1.6 # speed.divider=1.6 b. (KM) 15 | P a g e

[main] speed=speed_gps radio_freq=fmfre # For MPH - remove sign # before speed.divider=1.6 # speed.divider=1.6

6.7

mtc-manager folder

a. (MPH) (KM similar) settings.ini # the inclusion of an alternative screen saver, when you specify false will work full-time mechanism: screenClock=true (set to false if you DO NOT WANT screensaver) # Time off the screen if you do not set out full-time settings will be used in sec: screenTimeout=200 (set to howmany seconds to display if screenClock=true) # The name of the screensaver program package screenPackage=com.microntek.screenclock # Name Activiti screensaver screenClass=MainActivity # If the name of the package and Activiti is not specified, it will use a standard screensaver

ss_exceptions.ini Example listed in exceptions ini. This will disallow screenSaver to display com.microntek.avin com.microntek.media com.android.browser com.sygic.aura 16 | P a g e

com.waze com.navngo.igo.javaclient

6.8

mtc-music folder (MPH and KM are alike)

# Attention! This is the configuration file for the modified players JY and KGL. On players KLD viewing function tag with album art will not work. # Change the settings can only be after the = sign

[music] # Name of the images from a folder with music, to display in the player as the album and the projection on the background

album_cover=cover.jpg # Rewind time in seconds assigned to the virtual buttons on the left and right of the time scale of file playback. Forward and backward

fwdpress.time=20 backpress.time=20

# Configure the pop-up messages on the track in the player if it is not active. Resolution (true or false) and font size. toast=true toast.size=24 # true to display pictures of the album in the pop-up message about the change of the track, default false toast.picture.show=true # Size pictures in a popup message about the change of the track, default 150 toast.picture.size=80 17 | P a g e

# Transparent image popup notification toast.picture.alpha=

# Color label pop-up message about the change of track toast.color=

# Display a pop-up notification duration: long (~ 4 seconds) or short (~ 2 seconds), the default short toast.duration=short

# Format pop-up message. You can use the %title% %artist% %album% %filename% and %fullfilename%. You can combine and embed their characters and words.

toast.format=%artist% - %title%

# Desired level of transparency of the album cover on the projection of the general background of the player (in tenths of 1). If empty, the default will be the level of 0.25. To remove the projection, put = 0.

background_alpha=

# Include standard control buttons media player control_keys=true # To activate experimental krakozyabrami conversion function set true encode=true [screenclock]

color= 18 | P a g e

# Color fields speed.color=

# Color background rate numbers speed_back.color=

# Color digital clock clock.color=

# Color signatures: km / h, m, h sub_title_color=

# Turn off the screensaver only when you touch the screen. true - yes, false normal mode of operation.

touch_mode=true

# Turn off the screen saver when an incoming call. true - yes, false - of the phone appears on the background of the screen saver.

bluetooth.close=true # Color information strings screensaver. You can write a = red, = green, = blue, or hex-code = #ffff0000 (see. Googl). If empty, the default will be the color from the author.

color= # Format screensaver date, if set, will be your if empty, the default - EEEE d MMMM yyyy (Tuesday February 2, 2015) 19 | P a g e

date_format=

# The color and transparency of the background of the screen saver. Make black and not transparent as = #ff000000, or so = black, or any color. By default, black with transparency 0.75.

background_color=

# Transparency projection album cover in the screensaver (in fractions of 1). It lies on top of the background (transparent or black). To remove it completely, put = 0.

cover_alpha=0.25

# For MPH - remove sign # before speed.divider=1.6

#speed.divider=1.6

20 | P a g e

7 | POST INSTALL CONFIGURATIONS

Install Xposed 1. To activate Xposed, enter the android settings and scroll to Xposed Framework. 2. Xposed Installer will launch, select ‘Framework’. 3. Press ‘Install/Update’, Xposed will be installed and your head unit will reboot. Select Xposed Modules 1. Enter android settings, scroll to Xposed Framework. 2. Select Modules 3. Choose modules to activate/de-activate

21 | P a g e