Instruction Manual for RTN 950

Configuring RTN 950 Series for Smart POC and FTK project (Instruction Manual)

www.huawei.com

HUAWEI TECHNOLOGIES CO., LTD. HUAWEI TECHNOLOGIES CO., LTD.

Page 1

1. Setting of IP address on your Laptop

1.3 Go to Internet Protocol (TCP/IP) then click Properties

1.1 Right Click on icon of Local Area Connection (LAN)

1.2 Click on Properties

HUAWEI TECHNOLOGIES CO., LTD.

Page 2

1.4 Type in IP Address then click on OK ALWAYS USE THE FOLLOWING: IP Address: 129.9.0.99 Subnet mask: 255.255.0.0 (No need to filed-up the Default gateway and DNS)

HUAWEI TECHNOLOGIES CO., LTD.

Page 3

2. Open the U2000 Web LCT application (pre-installed) 3. Type in your user name and password to Login

User Name: admin Password: admin

HUAWEI TECHNOLOGIES CO., LTD.

Page 4

4. To Search for a NE (Network Element), click NE Search

4.1 Click on NE SEARCH first before you Add NE

HUAWEI TECHNOLOGIES CO., LTD.

Page 5

4.2 Click on SEARCH Note: Domain is automatically set (no need to input

HUAWEI TECHNOLOGIES CO., LTD.

Page 6

Web LCT will search and detect available NEs

4.3 Available NE will appear

4.4 Click Add NE

HUAWEI TECHNOLOGIES CO., LTD.

Page 7

4.6 After pressing OK, all available NE will be added on the screen (Communication Status will be NORMAL)

4.5 Then click on OK

HUAWEI TECHNOLOGIES CO., LTD.

Page 8

5. To Login into the NE

5.1 Highlight the NE you want to login

5.2 Click on NE Login

HUAWEI TECHNOLOGIES CO., LTD.

Page 9

5.3 Enter Password: password

5.4 Then press Apply and OK

HUAWEI TECHNOLOGIES CO., LTD.

Page 10

6. To configure the NE, check if the Login Status then click on NE Explorer

Status will be already Logged in 6.1 Highlight the NE you want to configure

6.2 Click on NE Explorer

HUAWEI TECHNOLOGIES CO., LTD.

Page 11

7. Web LCT will automatically detect the available board/card on the Slot Layout (with color ) 8. To install the cards, right click on the board then pressed “ADD” Note: PIU, FAN and CSH card will automatically running installed. Also slot 23 and 25 for ODU will not detect until you finished add the IFU2 boards.

8.1 Click add Physical Boards

HUAWEI TECHNOLOGIES CO., LTD.

Page 12

8.3 Right click the ODU board then click the add physical board

8.2 After you add all the physical boards, slot 23 and 25 for ODU board will appear.

HUAWEI TECHNOLOGIES CO., LTD.

Page 13

9. Configuring NE attribute Site Name and Modifying NE

9.1 Highlight NE name

9.3 Double click box under NAME and type SITE NAME. Then click apply and query. 9.2 Highlight NE attributes

HUAWEI TECHNOLOGIES CO., LTD.

Page 14

9.4 Click Modify NE ID and a dialog box will appear. 9.5 Type Site ID based on plan assigned by TNP. Then click OK NOTE: ID is a unique number.

HUAWEI TECHNOLOGIES CO., LTD.

Page 15

10. Configuring 1+1 Protection

10.1 Highlight NE name

10.3 Click IF 1+1 Protection

10.2 Highlight Link Configuration

HUAWEI TECHNOLOGIES CO., LTD.

10.4 Click New

Page 16

Working Mode : HSB Revertive Mode : Revertive WTR : 300 Enable Reverse Switching : Disable Working Board : 3-IFU2-1 Protection Board : 5-IFU2-1

10.5 Click ok

HUAWEI TECHNOLOGIES CO., LTD.

Page 17

11. Configuring Hybrid/AM configuration 11.3 Click Hybrid/AM Configuration

11.1 Highlight 3-IFU2

11.2 Highlight Hybrid/AM Configuration

HUAWEI TECHNOLOGIES CO., LTD.

Page 18

11.4 Double Click the box of IF Channel Band and change the band according to the plan

11.5 Double Click the box of Manually Specified Module and change the module according to the plan

11.6 Double Click the box of E1 Capacity and change the capacity according to the plan

11.7 Click Apply then Query

HUAWEI TECHNOLOGIES CO., LTD.

Page 19

12. Configuring Transmit Frequency and Transmit Power

12. 1 Highlight 23-ODU

12.3 Double click the box of transmit frequency and type the frequency according to link budget given by TNP

12.4 Click apply then query

12.2 Highlight ODU interface

HUAWEI TECHNOLOGIES CO., LTD.

Page 20

12.5 click the power attributes

12.6 Double click the box of transmit power and type the power according to link budget given by TNP

HUAWEI TECHNOLOGIES CO., LTD.

12.7 Click apply and query

Page 21

13. Configuring Cross-Connection

13.1 Highlight NE name

13.2 Highlight cross connection configuration

13.3 Click New

HUAWEI TECHNOLOGIES CO., LTD.

Page 22

HUAWEI TECHNOLOGIES CO., LTD.

Page 23

Thank You www.huawei.com

HUAWEI TECHNOLOGIES CO., LTD.

Page 24