Installing one Flexi Multiradio 10 BTS Capacity Extension Sub-Module (FBBA) Before you start When using only one FBBA, connect it to BB EXT1 (left-hand side) port on FSMx core.
1
Remove the dummy unit as follows: a. Remove the side flange. b. Remove the middle flange between the dummy units. c. Pull out the dummy unit. Leave the other dummy units in place if you are not installing any other optional sub-modules.
Fix the middle flange back in place between the extension sub-module and the remaining dummy unit. Make sure you install the middle flange as shown in Figure 34: Fixing FBBA and dummy unit. Tighten the screws as follows: •
Dummy unit (plastic): 0.8 Nm (0.59 ft-lb)
•
Metal parts: 2.4 Nm (1.77 ft-lb)
Figure 34.
4
Fixing FBBA and dummy unit
Fix the side flange back in place. Tighten the screws to 2.4 Nm (1.77 ft-lb). Figure 35.
Thank you for interesting in our services. We are a non-profit group that run this website to share documents. We need your help to maintenance this website.