iManager U2000 Northbound XML Interface User Guide-(V100R002C01_05)

February 28, 2017 | Author: Richard Johnson | Category: N/A
Share Embed Donate


Short Description

Download iManager U2000 Northbound XML Interface User Guide-(V100R002C01_05)...

Description

iManager U2000 Unified Network Management System V100R002C01

Northbound XML Interface User Guide Issue

05

Date

2010-11-19

HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd. Address:

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China

Website:

http://www.huawei.com

Email:

[email protected]

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

i

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

About This Document

About This Document Related Versions The following table lists the product versions related to this document. Product Name

Version

iManager U2000

V100R002C01

Intended Audience The iManager U2000 Northbound XML Interface User Guide describes the basic concept and principles of U2000 northbound XML interface. And it is also describes how to deploying and maintaining the XML NBI. This document also provides the relationship between the XML NBI and license, service port description, supported equipments, the object naming rule, layer rate description, the glossary, and the acronyms and abbreviations. This document guides the user to understand basic operations of the U2000 XML NBI. This document is intended for: l

Installation and Commissioning Engineer

l

Data Configuration Engineer

l

Application Developer

Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol

Description

DANGER

WARNING Issue 05 (2010-11-19)

Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. Indicates a hazard with a medium or low level of risk, which if not avoided, could result in minor or moderate injury.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

iii

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

About This Document

Symbol

Description

CAUTION

Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

TIP

Indicates a tip that may help you solve a problem or save time.

NOTE

Provides additional information to emphasize or supplement important points of the main text.

Command Conventions The command conventions that may be found in this document are defined as follows. Convention

Description

Boldface

The keywords of a command line are in boldface.

Italic

Command arguments are in italics.

[]

Items (keywords or arguments) in brackets [ ] are optional.

{ x | y | ... }

Optional items are grouped in braces and separated by vertical bars. One item is selected.

[ x | y | ... ]

Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected.

{ x | y | ... }*

Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected.

[ x | y | ... ]*

Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected.

GUI Conventions The GUI conventions that may be found in this document are defined as follows.

iv

Convention

Description

Boldface

Buttons, menus, parameters, tabs, window, and dialog titles are in boldface. For example, click OK.

>

Multi-level menus are in boldface and separated by the ">" signs. For example, choose File > Create > Folder.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

About This Document

Change History Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.

Changes in Issue 05 (2010-11-19) Based on Product Version V100R002C01 Errors are corrected.

Changes in Issue 04 (2010-09-24) Based on Product Version V100R002C01 Errors are corrected.

Changes in Issue 03 (2010-08-16) Based on Product Version V100R002C01 Errors are corrected.

Changes in Issue 02 (2010-07-16) Based on Product Version V100R002C01 Errors are corrected.

Changes in Issue 01 (2010-05-18) Based on Product Version V100R002C01 Initial release.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

v

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

Contents

Contents About This Document...................................................................................................................iii 1 System Overview.......................................................................................................................1-1 1.1 Introduction.....................................................................................................................................................1-2 1.2 Standards and Protocols Compliance..............................................................................................................1-2 1.3 Position of the XML NBI in the Integrated NMS...........................................................................................1-2 1.4 Supported Domains and Functions.................................................................................................................1-3 1.4.1 Alarm Function of the XML NBI..........................................................................................................1-3 1.4.2 Functions of the XML NBI (Configuration)..........................................................................................1-4 1.4.3 Performance Function of the XML NBI................................................................................................1-6 1.4.4 Functions of the XML NBI (Resource)..................................................................................................1-6 1.5 System Structure...........................................................................................................................................1-10 1.6 Technical Specifications...............................................................................................................................1-11

2 Principles.....................................................................................................................................2-1 2.1 Description of Involved Technology...............................................................................................................2-2 2.2 Working Principles of an XML NBI...............................................................................................................2-3 2.3 Sample Flow....................................................................................................................................................2-8

3 Deploying and Configuring the XML NBI...........................................................................3-1 3.1 Overview.........................................................................................................................................................3-2 3.2 Configuration Requirements...........................................................................................................................3-3 3.3 Logging in to the Client of the NMS Maintenance Suite................................................................................3-3 3.4 Checking the XML NBI Status.......................................................................................................................3-5 3.5 Deploying the XML NBI for the First Time...................................................................................................3-6 3.5.1 Adding XML NBI Component..............................................................................................................3-6 3.5.2 Adding the XML NBI Instance..............................................................................................................3-7 3.6 Configuring the XML NBI............................................................................................................................3-13

4 Maintaining the XML NBI.......................................................................................................4-1 4.1 Requirements for Maintenance Staff...............................................................................................................4-3 4.2 Routine Maintenance.......................................................................................................................................4-3 4.3 Logging In to the System Monitor Client.......................................................................................................4-4 4.4 Stopping the XML NBI...................................................................................................................................4-5 4.5 Disabling the XML NBI..................................................................................................................................4-7 4.6 Restarting the XML NBI.................................................................................................................................4-8 Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

vii

Contents

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4.7 Deleting the XML Interface Instance............................................................................................................4-10 4.8 Deleting the XML NBI Component..............................................................................................................4-11 4.9 FAQ...............................................................................................................................................................4-12 4.9.1 Failure in Starting the U2000 XML Interface......................................................................................4-12 4.9.2 Whether the U2000 Successfully Enables the XML Interface.............................................................4-12 4.9.3 Whether the U2000 XML Interface is Licensed..................................................................................4-13

A Relations Between License and XML Interface.................................................................A-1 B Service Port Description..........................................................................................................B-1 B.1 Service Ports Used by the XML Interface.....................................................................................................B-2 B.2 Notes and Precautions....................................................................................................................................B-3

C Product List................................................................................................................................C-1 D Object Naming Rules..............................................................................................................D-1 D.1 MD.................................................................................................................................................................D-2 D.2 OS..................................................................................................................................................................D-2 D.3 ME.................................................................................................................................................................D-3 D.4 TL..................................................................................................................................................................D-4 D.5 EH..................................................................................................................................................................D-5 D.6 EQ..................................................................................................................................................................D-6 D.7 PTP................................................................................................................................................................D-8 D.8 FTP................................................................................................................................................................D-9 D.9 CTP..............................................................................................................................................................D-11 D.10 RESOURCESITE......................................................................................................................................D-12 D.11 TUNNELPOLICY.....................................................................................................................................D-13 D.12 TMD..........................................................................................................................................................D-14 D.13 CC..............................................................................................................................................................D-15 D.14 PG..............................................................................................................................................................D-16 D.15 SNC...........................................................................................................................................................D-17 D.16 EPG............................................................................................................................................................D-18 D.17 EXPLICITPATH.......................................................................................................................................D-19 D.18 FDFR.........................................................................................................................................................D-20 D.19 VRRP.........................................................................................................................................................D-21 D.20 TCPROFILE..............................................................................................................................................D-22

E Layer Rate Description.............................................................................................................E-1 F Glossary.......................................................................................................................................F-1 G Acronyms and Abbreviations...............................................................................................G-1

viii

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

Figures

Figures Figure 1-1 Position of the XML interface of the U2000 in the integrated NMS................................................. 1-3 Figure 1-2 Software structure.............................................................................................................................1-11 Figure 2-1 SOAP message................................................................................................................................... 2-4 Figure 2-2 Principles of HTTP request response................................................................................................. 2-5 Figure 2-3 JMS.....................................................................................................................................................2-6 Figure 2-4 Interconnection process of the XML NBI..........................................................................................2-7 Figure A-1 Main dimensions...............................................................................................................................A-1

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

ix

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

Tables

Tables Table 1-1 Functions supported by the XML NBI (configuration)....................................................................... 1-4 Table 1-2 Functions supported by the XML NBI (resource)............................................................................... 1-6 Table 1-3 XML component................................................................................................................................1-11 Table 1-4 Performance indicators of an XML NBI............................................................................................1-12 Table 3-1 Parameters for the JMS server............................................................................................................. 3-8 Table 3-2 Parameters for the JMS server............................................................................................................. 3-9 Table 3-3 Parameters for the Advanced Items...................................................................................................3-10 Table 3-4 Parameters for the JMS server...........................................................................................................3-14 Table 3-5 Parameters for the JMS server...........................................................................................................3-15 Table 3-6 Parameters for the Advanced Items...................................................................................................3-16 Table 4-1 Meanings of license items..................................................................................................................4-13 Table A-1 Dimension description........................................................................................................................A-2 Table A-2 Description for License Item..............................................................................................................A-2 Table E-1 List of layer rates supported by the U2000 XML NBI.......................................................................E-1

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

xi

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

1 System Overview

1

System Overview

About This Chapter This chapter describes the technology features of XML NBI. 1.1 Introduction By bringing together modern software technologies and state-of-the-art technology models, the TM Forum has enabled the birth of a new interface standard, the Multi-Technology Operations Systems Interface (MTOSI). MTOSI will facilitate application-to-application inter-working, reduce time of deployment, and lower the cost of ownership of Operations Software and Systems (OSS). Service providers will gain leverage by being able to integrate systems from multiple vendors with a minimum of "integration tax." 1.2 Standards and Protocols Compliance The upper-level integrated NMS and OSS can communicate with the iManager U2000 that is compliant with the MTOSI standards by using the MTOSI. In this way, the upper-level integrated NMS and OSS can manage Huawei transport equipment, routers equipment, security equipment and metro ethernet equipment) in a centralized manner. 1.3 Position of the XML NBI in the Integrated NMS This section describes the position of XML NBI in the integrated NMS. 1.4 Supported Domains and Functions The U2000 XML NBI provide alarm management, service provisioning, inventory management, and performance management and can be integrated with the upper-layer OSS easily. 1.5 System Structure This topic describes the system structure of the U2000 XML NBI. 1.6 Technical Specifications This topic describes the performance indicators of the U2000 XML NBIs to provide a reference for the interconnection with the OSS.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

1-1

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

1 System Overview

1.1 Introduction By bringing together modern software technologies and state-of-the-art technology models, the TM Forum has enabled the birth of a new interface standard, the Multi-Technology Operations Systems Interface (MTOSI). MTOSI will facilitate application-to-application inter-working, reduce time of deployment, and lower the cost of ownership of Operations Software and Systems (OSS). Service providers will gain leverage by being able to integrate systems from multiple vendors with a minimum of "integration tax." With reference to the MTOSI recommendations, the XML interface of the U2000 is developed for iManager U2000. Network management systems of different levels can communicate with one another by using the MTOSI. The application of the MTOSI can meet the trends of the integration of network management systems and the development of cross-domain network management systems.

1.2 Standards and Protocols Compliance The upper-level integrated NMS and OSS can communicate with the iManager U2000 that is compliant with the MTOSI standards by using the MTOSI. In this way, the upper-level integrated NMS and OSS can manage Huawei transport equipment, routers equipment, security equipment and metro ethernet equipment) in a centralized manner. The MTOSI is compliant with the TMF standards as follows: l

TMF518

l

TMF612

l

TMF864

The MTOSI can realize the standard interface functions as follows: l

Query and notification of the physical inventory

l

Alarm reporting

l

Alarm query

l

Acknowledgement and unacknowledgement of alarms

1.3 Position of the XML NBI in the Integrated NMS This section describes the position of XML NBI in the integrated NMS. Figure 1-1 shows the position of the XML interface of the U2000 in the integrated NMS.

1-2

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

1 System Overview

Figure 1-1 Position of the XML interface of the U2000 in the integrated NMS

OSS

Northbound XML Interface U2000

U2000

Security Equipment

IP Network Router/Switch /PTN/BRAS

Transport Network SDH/WDM /OTN/MW

Transport Network SDH/WDM /OTN/MW

Other EMS

other Equipments

1.4 Supported Domains and Functions The U2000 XML NBI provide alarm management, service provisioning, inventory management, and performance management and can be integrated with the upper-layer OSS easily. 1.4.1 Alarm Function of the XML NBI 1.4.2 Functions of the XML NBI (Configuration) 1.4.3 Performance Function of the XML NBI 1.4.4 Functions of the XML NBI (Resource)

1.4.1 Alarm Function of the XML NBI The northbound XML alarm interface provides the following functions: l

Query of the alarm.

l

Measurement of the alarm quantity.

l

Acknowledgment and unacknowledgment of the alarm.

l

Reporting of the alarm.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

1-3

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

1 System Overview

l

Query of the performance threshold-crossing event.

1.4.2 Functions of the XML NBI (Configuration) Table 1-1 Functions supported by the XML NBI (configuration) Function

Description

Domain

Per-NE-based VPN service provisioning

Creating, deleting, modifying, activating, and deactivating a per-NE-based service, a PWE3 service (AES, CES, or EES service), or an L3VPN service, and reporting notifications accordingly

Routing and PTN domains

Adding, deleting, activating, and deactivating a perNE-based VPLS service site, and reporting notifications accordingly Adding, deleting, activating, and deactivating a perNE-based L3VPN service site, and reporting notifications accordingly Creating, deleting, activating, and deactivating a perNE-based PW switch, and reporting notifications accordingly Configuring the QoS feature for the PWE3, VPLS, and L3VPN services in the routing domain, the multicast feature for VPLS and L3VPN services, and the BRAS feature for L3VPN services Per-NE-based tunnel management

Creating, deleting, modifying, activating, and deactivating a per-NE-based tunnel (RSVP-TE, static, or IP tunnel), and reporting notifications accordingly

Routing and PTN domains

QoS template management

Creating, deleting, modifying, applying, and unapplying a QoS template, and reporting the creation and deletion notifications of a QoS template accordingly

Routing and PTN domains

Applying and unapplying a QoS template to and from a port Attribute configuration of physical ports

Configuring the attributes of physical ports (POS, ATM, Ethernet, or PDH ports) in the IP domain and reporting notifications accordingly Configuring the attributes of physical ports in the transport domain and reporting notifications accordingly

1-4

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Routing, PTN, switch, and transport domains

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

1 System Overview

Function

Description

Domain

Management of logical ports

Creating, deleting, and modifying a logical port (Ethernet trunk, IP trunk, MP group, IMA, logical serial port, MFR group, VLAN IF, or tunnel IF) and reporting notifications accordingly

Routing, PTN, and switch domains

Configuring a member port for a logical port of the aggregation type, including adding, modifying, and deleting a member port and reporting notifications accordingly Configuring an Ethernet trunk port of the aggregation type in the switch domain, including creating and deleting an Ethernet trunk logical port, and configuring member ports for the Ethernet trunk logical port Subinterface management

Creating and deleting a subinterface, configuring the attributes of a subinterface, and reporting notifications accordingly

Routing domain

VLAN management of ports

Configuring the working mode of a port

Routing and switch domains

Configuring the default VLAN, allowed VLANs, and VLAN removal attributes Configuring the VLAN stacking, VLAN mapping, and VLAN multicast feature for a port

Global VLAN management

Creating, deleting, and modifying a VLAN in the access domain, and configuring the multicast feature for the VLAN Creating, deleting, and modifying a global VLAN in the switch domain, and configuring the multicast feature for the global VLAN

Access, switch, and routing domains

Creating, deleting, and modifying a global VLAN in the routing domain

Issue 05 (2010-11-19)

NE attribute configuration

Configuring the basic attributes of an NE, deleting an NE, and reporting notifications accordingly

All domains

GPON service provisioning

Provisioning GPON services, and creating, deleting, modifying, activating, and deactivating the GPON services

Access domain

ONT management

Creating and deleting an ONT, and configuring the attributes of the ONT and ONT ports

Access domain

Transmission descriptor management

Creating and deleting a transmission descriptor, and reporting notifications accordingly

Routing and PTN domains

Tunnel policy management

Creating, deleting, and modifying a tunnel policy, and reporting notifications accordingly

Routing domain

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

1-5

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

1 System Overview

Function

Description

Domain

VRRP management

Creating, modifying, and deleting a VR interface and a VR monitoring interface, configuring the global attributes of the VR interface, and reporting notifications accordingly

Routing domain

ANCP management

Configuring the global ANCP attributes, creating and deleting a global ANCP template, applying an ANCP neighbor template to ports, and setting ANCP line parameters

Routing domain

1.4.3 Performance Function of the XML NBI The XML NBI provides the following functions: l

Querying the current performance data.

l

Querying the history performance data.

l

Reporting performance threshold-crossing events.

1.4.4 Functions of the XML NBI (Resource) Table 1-2 Functions supported by the XML NBI (resource) Function

Description

Domain

Query for the management domains and OS

Querying the management domains of the U2000 and OS information

-

Resource site query

Querying information about all optical NEs in the transport domain

Transport domain

Querying the names of all optical NEs in the transport domain Querying the details of a single optical NE by optical NE name Querying information about resources (such as card and slot information) of an optical NE by optical NE name Reporting the creation and deletion notifications of an optical NE Reporting the status change notifications of resources of an optical NE

1-6

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

1 System Overview

Function

Description

Domain

NE information query

Querying the names of all NEs in the management domain

All domains

Querying the details of all NEs in the management domain Querying the details of a single NE by NE name Querying information about NEs in the routing and switch domains by IP address Reporting the creation, deletion, and attribute change notifications of an NE Fiber/Cable query

Querying information about fibers in the transport domain Querying information about IP links and Layer 2 links in the routing domain

Transport and routing domains

Querying fibers, IP links, and Layer 2 links, and reporting the creation and deletion notifications accordingly Query for information about the resources of an NE

Querying information about shelves, slots, cards, and subslots of an NE by NE name

All domains

Querying information about cards, subslots, and others of an equipment holder by equipment holder name Reporting addition and deletion notifications of a shelf, slot, or card

Query for physical port information

Querying the names of all physical ports (including POS, ATM, Ethernet, and PDH ports) on an NE by NE name

All domains

Querying the details of all physical ports on an NE by NE name Querying the details of a single physical port by physical port name Reporting the change notifications of important attributes of a physical port Query for logical port information

Querying the names of all logical ports (including Ethernet trunk, IP trunk, MP group, IMA, logical serial port, MFR group, and VLAN IF) on an NE by NE name Querying the details of all logical ports on an NE by NE name

Transport, routing, PTN, and switch domains

Querying the details of a single logical port by logical port name Reporting the creation, deletion, and attribute change notifications of a logical port Reporting the notifications of adding and deleting a member port to and from a logical port of the aggregation type

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

1-7

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

1 System Overview

Function

Description

Domain

Subinterface query

Querying the names of all subinterfaces of a physical port or logical port by physical port name or logical port name

Transport and routing domains

Querying the details of all subinterfaces of a physical port or logical port by physical port name or logical port name Querying the details of a single subinterface by subinterface name Reporting the creation, deletion, and attribute change notifications of a subinterface VPN service query

Querying the names of all VPN services (including PWE3, VPLS, and L3VPN services) on an NE by NE name

Routing and PTN domains

Querying the details of all VPN services (including PWE3, VPLS, and L3VPN services) on an NE by NE name Querying the details of a single VPN service (PWE3, VPLS, or L3VPN service) by VPN service name Reporting the creation, deletion, status change, and attribute change notifications of a VPN service QoS template query

Querying the names of all global QoS templates in the management domain Querying the details of all global QoS templates in the management domain

Routing and PTN domains

Querying the details of a single QoS template by QoS template name Querying resources where a QoS template is applied by QoS template name Reporting the creation and deletion notifications of a QoS template Tunnel query

Querying the names of all dynamic tunnels, static tunnels, and IP tunnels of an NE by NE name Querying the details of all dynamic tunnels, static tunnels, and IP tunnels of an NE by NE name

Routing and PTN domains

Querying the details of a single tunnel by tunnel name Reporting the creation, deletion, status change, and attribute change notifications of a tunnel Tunnel policy query

Querying the names of all tunnel policies of an NE Querying the details of all tunnel policies of an NE

Routing domain

Reporting the creation and deletion notifications of a tunnel policy

1-8

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

1 System Overview

Function

Description

Domain

Transmission descriptor query

Querying the names of all transmission descriptors of an NE

Routing and PTN domains

Querying the details of all transmission descriptors of an NE Reporting the creation and deletion notifications of a transmission descriptor Query for trails and cross-connections

Querying the names of network-wide SDH, WDM, OTN, and RTN trails

Transport domain

Querying the details of network-wide SDH, WDM, OTN, and RTN trails Querying the details of a single SDH, WDM, OTN, or RTN trail by trail name Querying all cross-connections of an NE Querying the routes of a trail by trail name Querying the routes and optical fibers of a trail by trail name Reporting the creation, deletion, status change, and attribute change notifications of a trail Reporting the creation and deletion notifications of a cross-connection Reporting the notification of route attribute changes of a trail Protection group query

Querying all SDH, WDM, and equipment protection groups of an NE

Transport domain

Querying the details of a single SDH, WDM, or equipment protection group by protection group name Querying the protection switching data of a single SDH, WDM, or equipment protection group by protection group name GPON service query

Querying the names of all PON services on an NE by NE name

Access domain

Querying the details of all PON services on an NE by NE name Querying the details of a single PON service by PON service name Querying the routes of a PON service by PON service name ONT query

Issue 05 (2010-11-19)

Querying information about ONTs associated with an OLT or a PON port by OLT name or PON port name, and querying ONT information by ONT name

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Access domain

1-9

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

1 System Overview

Function

Description

Domain

Query for service virtual ports and profiles

Querying service virtual ports of an NE by NE name

Access domain

ANCP information query

Querying all ANCP neighbor templates on an NE by NE name

Querying ADSL line profiles, G.SHDSL line profiles, and MEF IP traffic profiles of an NE by NE name

Routing domain

Querying all ANCP line information of an NE by NE name Querying ports where an ANCP neighbor template is applied by ANCP neighbor template name VRRP information query

Querying the names of all VR interfaces of an NE by NE name

Routing domain

Querying the details of all VR interfaces of an NE by NE name Querying information about the VR monitoring interface of a VR interface by VR interface name Querying the global attributes of a VR interface by VR interface name Query for physical inventories by using a coarse granularity interface

Querying the management domain, OS, cables, and NEs by using the getInventory interface

All domains

Querying the shelves, slots, cards, physical ports of the entire network or a single NE by using the getInventory interface Querying the names, attributes, or details of inventory objects by specifying filter criteria The getInventory interface supports multiple MEP modes such as SRR, SIT, and AFB.

1.5 System Structure This topic describes the system structure of the U2000 XML NBI. 1.5 System Structure shows the software structure of the U2000 XML NBI.

1-10

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

1 System Overview

Figure 1-2 Software structure

Inventory Provisioning Performance (get/set/create/delete/edit/ active/deactive operations)

SOAP/HTTP/ HTTPS/FTP/ SFTP

Alarm Inventory Update (Notify events) OSS Applications JMS ASN.1

Database

TCP/ ODBC/ JDBC

U2000 Qx/SNMP

GUI Client

Managed Networks

Table 1-3 XML component Component

Function

U2000

Indicates the U2000 server. It is used for managing network and providing NBIs.

GUI client

Indicates the U2000 client. It provides a GUI for performing operations on network. The client communicates with the U2000 server through the Asn.1 protocol.

OSS applications

Indicates the upper layer OSS. It performs operations on network through the XML NBI provided by the U2000.

Database

Indicates the U2000 database. It is used for saving and providing U2000 data.

1.6 Technical Specifications This topic describes the performance indicators of the U2000 XML NBIs to provide a reference for the interconnection with the OSS. Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

1-11

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

1 System Overview

Table 1-4 shows the performance indicators of each XML NBI. Table 1-4 Performance indicators of an XML NBI Item

Indicator

Number of NMS connections received concurrently

10

Delay of response to XML request

Shorter than 3s when the CPU usage is lower than 50%

Alarm notification processing capability

More than 60 records per second when 3 NMSs are connected

Alarm notification transmission delay

Shorter than 10s when 3 NMSs are connected

CAUTION The alarm handling capability of the CORBA NBI depends on many factors, such as alarm quantity on the live network, and CPU performance and memory size of the server. If an alarm storm occurs, the CORBA NBI will possibly reach its handling limit. The CORBA NBI can report a maximum of 1,000,000 alarms within one hour. To ensure the stability of the system, the CORBA NBI will discard some alarms if the alarm quantity exceeds 1,000,000. You are recommended to handle network faults instantly if an alarm storm occurs. Also, the OSS is suggested to synchronize alarms actively at proper times, for example, when the system is idle.

1-12

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

2 Principles

2

Principles

About This Chapter 2.1 Description of Involved Technology This section describes the related technology and concept involved in this document. 2.2 Working Principles of an XML NBI The U2000 XML NBI adopts the Web Service technology. Web Service is a technology for accessing network services. It defines services through WSDL or XSD and implements the communication through the SOAP message. In addition, it supports various transmission protocols, such as HTTP, HTTPS, and JMS. The following describes the principles of the XML NBI based on the key scenarios supported by the U2000 XML NBI and the preceding features. 2.3 Sample Flow The following section describes how to query all the current alarms on the NMS.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

2-1

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

2 Principles

2.1 Description of Involved Technology This section describes the related technology and concept involved in this document.

MTOSI Multi-Technology Operations System Interface (MTOSI) is a standard for implementing interfaces between OSSs. Service providers (carriers) use multiple Operational Support Systems (OSS) to manage complex networks. Since the various parts of the network must interact with the OSSs. It is standardized by the Tele-management Forum (TM Forum). The TMF NGOSS provides a set of reference models that aid in analyzing and designing next generation BSS and OSS solutions that may utilize the MTOSI interface specifications.

JMS The Java Message Service (JMS) API is a Java Message Oriented Middleware (MOM) API for sending messages between two or more clients. JMS is a specification developed under the Java Community Process as JSR 914. The JMS API supports the following models: l

Point-to-point or queuing model.

l

Publish and subscribe model.

In the point-to-point or queuing model, a producer posts messages to a particular queue and a consumer reads messages from the queue. Here, the producer knows the destination of the message and posts the message directly to the consumer's queue. It is characterized by the following rule: l

Only one consumer gets the message.

l

The producer does not have to be running at the time the receiver consumes the message, nor does the receiver need to be running at the time the message is sent.

l

Every message successfully processed is acknowledged by the receiver.

The publish/subscribe model supports publishing messages to a particular message topic. Zero or more subscribers may register interest in receiving messages on a particular message topic. In this model, neither the publisher nor the subscribers know about each other. A good metaphor for it is anonymous bulletin board. The following is the characteristics of this model. l

Multiple consumers obtain the message.

l

There is a timing dependency between publishers and subscribers. The publisher has to create a subscription in order for clients to be able to subscribe. The subscriber has to remain continuously active to receive messages, unless it has established a durable subscription. In that case, messages published while the subscriber is not connected are redistributed whenever it reconnect.

l

Using Java, JMS provides a way of separating the application from the transport layer of providing data. The same Java classes are used to communicate with different JMS providers by using the JNDI information for the desired provider. The classes first use a connection factory to connect to the queue or topic, and then use populate and send or publish the messages. On the receiving side, the clients then receive or subscribe to the messages.

Web Service The W3C defines a Web Service as a software system designed to support interoperable Machine to Machine interaction over a network. Web Service is frequently just Web APIs that are accessed 2-2

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

2 Principles

over a network, such as the Internet, and executed on a remote system hosting the requested services. The W3C Web Service definition encompasses many different systems, but in common usage the term refers to clients and servers that communicate using XML messages that follow the SOAP standard. Common in both the field and the terminology is the assumption that there is also a machine readable description of the operations supported by the server, a description in the Web Service Description Language (WSDL). The latter is not a requirement of a SOAP endpoint, but it is a prerequisite for automated client-side code generation in the mainstream Java and .NET SOAP Frameworks. Some industry organizations, such as the WS-I, mandate both SOAP and WSDL in their definition of a Web Service.

HTTP(S) Hypertext Transfer Protocol (HTTP) is a communications protocol used to transfer or convey information on the World Wide Web. HTTP is a request/response protocol between clients and servers. The client making an HTTP request, such as a web browser, spider, or other end-user tool - is referred to as the user agent. The responding server, which stores or creates resources such as HTML files and images, is called the origin server.

WSDL The Web Service Description Language (WSDL) is a XML-based language that provides a model for describing Web Service. The WSDL defines services as collections of network endpoints, or ports. WSDL specification provides an XML format for documents for this purpose. The abstract definition of ports and messages is separated from their concrete use or instance, allowing the reuse of these definitions. A port is defined by associating a network address with a reusable binding, and a collection of ports define a service. Messages are abstract descriptions of the data being exchanged, and port types are abstract collections of supported operations. The concrete protocol and data format specifications for a particular port type constitutes a reusable binding, where the messages and operations are then bound to a concrete network protocol and message format. In this way, WSDL describes the public interface to the Web Service.

SOAP Simple Object Access Protocol (SOAP) is a protocol for exchanging XML-based messages over computer networks, normally using HTTP/HTTPS. SOAP forms the foundation layer of the Web Service stack, providing a basic messaging framework upon which abstract layers can be built.

XML The eXtensible Markup Language (XML) is a general-purpose markup language. It is classified as an extensible language, because it allows its users to define their own tags. Its primary purpose is to facilitate the sharing of structured data across different information systems, particularly through internet. It is used both to encode documents and serialize data.

2.2 Working Principles of an XML NBI The U2000 XML NBI adopts the Web Service technology. Web Service is a technology for accessing network services. It defines services through WSDL or XSD and implements the communication through the SOAP message. In addition, it supports various transmission protocols, such as HTTP, HTTPS, and JMS. The following describes the principles of the XML NBI based on the key scenarios supported by the U2000 XML NBI and the preceding features. Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

2-3

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

2 Principles

Defining Services Through WSDL or XSD l

The WSDL or XSD is a type of XML document.

l

The XSD describes the data type and message format.

l

The WSDL describes the external services and interface, and the bound transmission protocols, such as HTTP, HTTPS, and JMS.

Implementing the Communication Through the SOAP Message l

SOAP defines the data format that is irrelevant to the transmission protocol.

l

The SOAP message can be enveloped as the message of any protocol for transmission.

Figure 2-1 SOAP message

Adopting the HTTP as the Key Protocol for Request Response of an Interface

2-4

l

The cost of developing the client and server by using HTTP is lower than that by using other protocols.

l

The HTTP protocol is relatively mature and is supported by most of systems.

l

Usually, a firewall does not block the HTTP-based communication. Therefore, HTTP can penetrate a firewall.

l

Messages are transmitted in HTTPS encryption mode.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

l

2 Principles

Figure 2-2 Principles of HTTP request response

Adopting the JMS as the Notification Bus l

Subscription and unsubscription of various notification resources, such as inventory and alarms – You can subscribe to one type of notifications or multiple types of notifications.

l

One to many notification sending – Multiple users can subscribe to the same type of notifications. That is, the notifications can be sent to multiple users at the same time.

l

Saving of notifications as a file – The message middleware can save notification messages in a physical medium. After an OSS subscribes to a type of notifications, if the OSS goes offline due to a fault, the OSS can receive the notifications sent during the offline period when the OSS goes online.

l

Flexible setting of filter criteria – When subscribing to a type of notifications, you can specify the filter criteria. Currently, you can set filter criteria only for alarms. In this way, only the notifications that meet the filter criteria are sent to you.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

2-5

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

2 Principles

Figure 2-3 JMS

2-6

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

2 Principles

Interconnection Process Figure 2-4 Interconnection process of the XML NBI

Step

Description

1

Start the JMS message middleware.

2

Start the Web Service middleware.

3

Establish a connection.

4

Connect to the JMS message middleware.

5

Sent a request message.

6

Return a response message.

7

Report an alarm.

l

l

l Issue 05 (2010-11-19)

Scenario 1: System startup process 1.

Start the JMS message middleware.

2.

Start the Web Service middleware.

3.

Connect the JMS message middleware to the U2000.

Scenario 2: User's subscription to a notification 1.

Connect the OSS to the JMS message middleware.

2.

The OSS subscribes the desired notification.

Scenario 3: Alarm reporting Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

2-7

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

2 Principles

l

l

1.

The U2000 reports an alarm to the JMS message middleware.

2.

The OSS receives the alarm that is forwarded by the JMS message middleware.

Scenario 4: Call of common interfaces 1.

The OSS sends a request message.

2.

The U2000 returns a response message.

Scenario 5: Call of coarse granularity interfaces 1.

The OSS sends a request message.

2.

The U2000 returns a message to the FTP server and upload the progress information.

3.

After the file transfer is complete, the U2000 sends a completion notification to the OSS.

2.3 Sample Flow The following section describes how to query all the current alarms on the NMS.

Context NOTE

When integrating with the XML NBI, you can compile the WSDL file to an API interface file, which simplifies the operation of code integration.

Procedure 1 Find the interface definition corresponding to the current alarms in the AlarmRetrievalHttp.wsdl file, as shown below.

2 Find the data type definition of the request message in the AlarmRetrievalMessages.xsd file, as shown below. Request message structure of the getActiveAlarms operation This operation returns (to the requesting OS) a specified subset of the active alarms known to the target OS. The target OS returns all alarms satisfying the filter constraints of the requesting OS. This operation can only be directed to a top-level OS and not to a subordinate OS.

2-8

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

2 Principles

Defines the subset of the set of active alarms known to the target OS that are to be returned to the requesting OS.

3 Find the definition of the response message in the AlarmRetrievalMessages.xsd file, as shown below. Response message structure of the getActiveAlarms operation

4 Construct the following XML message according to the data type definition of the request and send the XML message to the XML NBI through HTTP. admin:u2000u2000 MultipleBatchResponse RPC 20 1

5 Receive the following XML message from the XML NBI and parse the message according to the data type definition of the response message. admin:u2000u2000 MultipleBatchResponse RPC 20 1

----End Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

2-9

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

3

3 Deploying and Configuring the XML NBI

Deploying and Configuring the XML NBI

About This Chapter This chapter describes how to deploy and configure the U2000 XML NBI. It includes the following information: 3.1 Overview This topic describes the background information and the terms involved in the process of deploying and configuring the northbound interface. 3.2 Configuration Requirements U2000 XML NBI and the U2000 server run on the same PC or Sun workstation, any additional configuration is not required. But to enable the XML NBI, you must purchase the license for the corresponding functions. 3.3 Logging in to the Client of the NMS Maintenance Suite After you log in to the client of the NMS Maintenance Suite, you can maintain the U2000 by using the NMS Maintenance Suite, including deploying the U2000 and configuring the instance of the northbound interface. 3.4 Checking the XML NBI Status After check the license and ensure it is support XML functions, you need to check the current status of XML NBI, and deploy the XML NBI according the status. 3.5 Deploying the XML NBI for the First Time By default, the XML NBI is not installed during the installation of U2000 server. To enable the XML NBI, you need to add the XML NBI the XML NBI component first, then add the XML NBI instance. 3.6 Configuring the XML NBI In order to enable the XML NBI, even though you have installed XML NBI component, you need configure the XML parameters accord to NMS planning. Also, you can modify the parameters by configuring XML NBI again. Generally, general parameters are mandatory and advanced items are optional but the default values are recommended. Every advanced item is independent and you need not set the parameters.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

3-1

3 Deploying and Configuring the XML NBI

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

3.1 Overview This topic describes the background information and the terms involved in the process of deploying and configuring the northbound interface.

Attention Item l

Northbound interface is an optional component of the U2000. A license is required for using this function.

l

If you do not install the northbound interface component during the installation of the U2000, you need to add it manually.

l

The northbound interface is a System single-instance deployment package. Therefore, only one instance can be deployed.

CAUTION l After the northbound interface component is installed or added, you need to add a corresponding instance and configure parameters. Then, the U2000 can start the NBI-related process. l After initializing the database of the U2000, you need to configure the northbound interface instance again. l After the northbound interface instance is configured, you need to restart all the NMS services.

Terms The following explains certain confusable terms: l

Component: It is the software function unit that can be selected for installation. A component can consist of multiple deployment packages.

l

Deployment package: It is the software unit that is deployed on a PC. In a distributed system, the deployment packages of a component may be deployed on different PCs. Deployment packages are classified into the following types: – System single-instance: Such deployment packages can be installed on only one server and the server can be deployed with only one instance. – Single-server single-instance: Such deployment packages can be installed on multiple servers and each server can be deployed with only one instance. – Single-server multi-instance: Such deployment packages can be installed on multiple servers and each server can be deployed with multiple instances. NOTE

The type of northbound interface deployment package is System single-instance.

NMS Maintenance Suite Through the GUI of the NMS maintenance tool, you can conveniently deploy the northbound interface. 3-2

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

3 Deploying and Configuring the XML NBI

The NMS Maintenance Suite is a graphical system maintenance tool that is developed for the iManager U2000. The NMS Maintenance Suite is used to deploy the instances and distributed system of the U2000. Refer to the NMS Maintenance Suite part of the iManager U2000 Administrator Guide for the details about the NMS Maintenance Suite.

3.2 Configuration Requirements U2000 XML NBI and the U2000 server run on the same PC or Sun workstation, any additional configuration is not required. But to enable the XML NBI, you must purchase the license for the corresponding functions. NOTE

For different operation system, the configuration requirements of U2000 is different, refer to the corresponding Software Installation Guide for more information.

Hardware Configuration In practice, the U2000 XML interface and the U2000 server run on the same PC or SUN workstation. The hardware should be well configured enough to ensure the proper installation and running of the U2000 server. Any additional hardware configuration is not required the U2000 XML interface. For details of hardware requirements of U2000 Server, refer to section "Configuration Requirements" in the iManager U2000 Software Installation Guide.

Software Configuration Since the XML interface is integrated into the U2000 installation software, no additional software configuration is required for the installation of the U2000 XML interface. For details of software requirements U2000 Server, refer to section "Configuration Requirements" in the iManager U2000 Software Installation Guide.

License The U2000 controls the functions and available resources of the XML NBI through a license. If you want to enable the XML interface, you need to purchase the U2000 license. Ensure the license support XML interface function before deploying the XML NBI. For details, see A Relations Between License and XML Interface. If the license does not support the functions or resources needed, contact Huawei engineers to apply for the license. For the license introduction and information on how to apply for a license, see section Applying for and Updating the License in the iManager U2000 Administrator Guide.

3.3 Logging in to the Client of the NMS Maintenance Suite After you log in to the client of the NMS Maintenance Suite, you can maintain the U2000 by using the NMS Maintenance Suite, including deploying the U2000 and configuring the instance of the northbound interface. Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

3-3

3 Deploying and Configuring the XML NBI

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

Prerequisite l

The server of the NMS Maintenance Suite must be started.

l

The client and the server of the NMS Maintenance Suite must communicate with each other normally.

Context In normal cases, the NMS Maintenance Suite server starts along with the OS. You can do as follows to check whether the NMS Maintenance Suite server is started: l

In the Windows OS, check whether the msdaemon.exe and msserver.exe processes are started in the Task Manager window. If you can find the two processes in the process list, it indicates that the NMS Maintenance Suite server is started. Otherwise, open the DOS window and run the following command to start the NMS Maintenance Suite server: > net start nodemgr

l

In the Solaris or SUSE Linux OS, run the following command as the root user to check whether the NMS Maintenance Suite server is started: # ps -ef | grep java

If ./engineering/jre/jre_unix/bin/java is displayed, it indicates that the NMS Maintenance Suite server is started. Otherwise, run the following commands to start the NMS Maintenance Suite server: # cd /opt/HWENGR/engineering # ./startserver.sh

Procedure 1 On a computer installed with the NMS Maintenance Suite client, double-click the U2000 MSuite shortcut icon on the desktop and then wait about one minute. The Login dialog box is displayed. NOTE

l In the Solaris OS, you must log in to the Java desktop system as the root user. Otherwise, the U2000 MSuite shortcut icon is not displayed on the desktop. l In the SUSE Linux OS, you cannot log in to the NMS Maintenance Suite client through the shortcut icon. You need to run the following commands as the root user to start the NMS Maintenance Suite client: # cd /opt/HWENGR/engineering # ./startclient.sh

2 Set the related login parameters. The login parameters are described as follows: l IP Address: It refers to the system IP address of the computer where the NMS Maintenance Suite server resides. In a distributed system, you need to enter the system IP address of the master server. l Port No.: The default port number is 12212. You do not need to change the default value during login. l User Name: The default user name is admin. l Password: The initial password is admin. 3 Click OK.

3-4

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

3 Deploying and Configuring the XML NBI

NOTE

l When you log in to the client of the NMS Maintenance Suite, a progress bar showing the progress of querying components and instances is displayed. In this case, wait until the operation is complete. l The NMS Maintenance Suite works in single-user mode. That is, only one NMS Maintenance Suite client can log in to the NMS Maintenance Suite server at one time. In a high availability system, only one site can be logged in at one time.

----End

Result If a dialog box is displayed during the login, indicating that network configuration information is inconsistent and re-synchronization is required after login, read through the message to learn the server that needs to be synchronized. Then, do as follows: 1.

On the NMS Maintenance Suite client, click the Server tab.

2.

Right-click the server whose network configuration needs to be synchronized, and choose Synchronize the network configuration from the shortcut menu. A dialog box is displayed for you to confirm the operation. NOTE

Before synchronizing network configuration, you need to stop NMS services. For details, see the U2000 Administrator Guide.

3.

Click OK.

3.4 Checking the XML NBI Status After check the license and ensure it is support XML functions, you need to check the current status of XML NBI, and deploy the XML NBI according the status.

Context The XML NBI is one of the components of U2000. The installation of the XML NBI is integrated in the process of installing the U2000 server. There are two cases of the installation. l

If the XML NBI is not installed during the installation of the U2000 server, to enable the interface, you need to add the component first and then add the instance. For details, see 3.5 Deploying the XML NBI for the First Time.

l

If the XML NBI is installed during the installation of the U2000 server, to enable the interface, you need to configure the instance. For details, see 3.6 Configuring the XML NBI.

The details for how to install the U2000 Server, refer to iManager U2000 Software Installation Guide. If you want to install XML NBI, ensure you have select Northbound XML Interface component during the installation of the U2000 server.

Procedure 1 Log in to the client of the NMS Maintenance Suite. For details, see 3.3 Logging in to the Client of the NMS Maintenance Suite. 2 Click Instance tab, check whether the AgentXML exist in the instance list. Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

3-5

3 Deploying and Configuring the XML NBI

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

l

If the AgentXML instance exist, refer the steps in 3.6 Configuring the XML NBI enable the XML NBI.

l

If the AgentXML instance not exist, you need to check whether the XML NBI deployment package exist according the Step 3.

3 Click Deployment Package tabs, check whether the XML NBI exist in the deployment package list. l

If the XML NBI deployment package exist, refer the steps in 3.5.2 Adding the XML NBI Instance enable the XML NBI.

l

If the XML NBI deployment package not exist, refer the steps in 3.5 Deploying the XML NBI for the First Time enable the XML NBI.

----End

3.5 Deploying the XML NBI for the First Time By default, the XML NBI is not installed during the installation of U2000 server. To enable the XML NBI, you need to add the XML NBI the XML NBI component first, then add the XML NBI instance. 3.5.1 Adding XML NBI Component The XML NBI is one component of the U2000. If you have not installed the XML NBI by default, you need to add the XML NBI component. 3.5.2 Adding the XML NBI Instance The type of XML NBI deployment package is system single-instance, you can deploy one instance only. After adding the XML NBI component, you need to adding XML NBI instance to enable the XML interface. You need set the general parameters, and it is recommended you set the advanced parameters to default value.

3.5.1 Adding XML NBI Component The XML NBI is one component of the U2000. If you have not installed the XML NBI by default, you need to add the XML NBI component.

Prerequisite l

The NMS Maintenance Suite server installed on the master and slave servers must be started.

l

The System Monitor server of the U2000 must be started.

l

The Database server process must be in the Running state.

l

The NMS Maintenance Suite client communicates with the NMS Maintenance Suite server in the normal state.

l

In a distributed system, you only need to log in to the NMS maintenance tool server of the master server to perform this operation.

l

In a high availability system, you only need to log in to the NMS maintenance tool server of the primary site to perform this operation.

Context

3-6

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

3 Deploying and Configuring the XML NBI

Procedure 1 Log in to the client of the NMS Maintenance Suite. For details, see 3.3 Logging in to the Client of the NMS Maintenance Suite. 2 On the NMS Maintenance Suite client, choose Deploy > Add Component. The Add Component dialog box is displayed.

CAUTION l In the distributed system, the XML NBI could be deployed in master server only. l You can add one XML NBI component only. 3 Choose the Northbound XML Interface component and click OK, the progress bar is displayed. 4 Wait until the dialog box is displayed to prompt the message The component is successfully added. 5 Click OK, completed the operation. ----End

Follow-up Procedure After the component is added, you need to add the XML NBI instance, then you can enable the XML interface.

3.5.2 Adding the XML NBI Instance The type of XML NBI deployment package is system single-instance, you can deploy one instance only. After adding the XML NBI component, you need to adding XML NBI instance to enable the XML interface. You need set the general parameters, and it is recommended you set the advanced parameters to default value.

Prerequisite l

The NMS Maintenance Suite server installed on the master and slave servers must be started.

l

The System Monitor server of the U2000 must be started.

l

Database Server Process must be in the Running state.

l

The NMS Maintenance Suite client must communicate with the NMS Maintenance Suite server in the normal state.

l

The component to which the instance is added must be installed. If the component is not installed, you must add XML NBI component first.

l

In a distributed system, you only need to log in to the NMS maintenance tool server of the master server to perform this operation.

Context

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

3-7

3 Deploying and Configuring the XML NBI

l

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

In a high availability system, you only need to log in to the NMS maintenance tool server of the primary site to perform this operation.

Procedure 1 Log in to the client of the NMS Maintenance Suite. For details, see 3.3 Logging in to the Client of the NMS Maintenance Suite. 2 On the NMS Maintenance Suitel client, click the Deployment Package tab. Right-click the northbound XML interface deployment package and choose Add Instance. The dialog box is displayed. 3 In the General tab, set the parameters for basic items.

4 Configure the JMS server. 1.

Enter the IP and JMS Server Port, the default IP is the IP address of NMS server and the default port is 61616.

2.

Optional: Select Base on SSL, set SSL Port, the default port is 61617. NOTE

l The JMS server is a message server located between the upper layer OSS and the interfaces for JMS communication. l JMS Server and U2000 server could run in different PC or workstation, but you must ensure it is valid. It is recommended you use the default value, depoly the JMS server and U2000 server in the same PC or workstation.

Table 3-1 provides the parameters for JMS Server. Table 3-1 Parameters for the JMS server

3-8

Parameter

Description

Default Value

IP

Indicates the IP address of the JMS server.

The IP address of U2000 server.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

3 Deploying and Configuring the XML NBI

Parameter

Description

Default Value

JMS Server Port

Indicate the port ID used for the JMS server.

61616

l Port 61616 is used for non-SSL JMS server. l Port 61617 is used for SSL JMS server. JMS User Name

The user name to access the JMS server.

admin

JMS Password

The password to access the JMS server.

test1234

5 Configure the Web service. 1.

Choose IP from the drop-list, the default IP is the IP address of NMS server.

2.

Optional: Select Register JMS Service, enable the JMS Service. NOTE

If you have not select the check box, the JMS service is disabled.

3.

Select the protocol, Base on HTTP or Base on HTTPS, set the Port, it is 9997 by default. NOTE

You cannot select both of the Base on HTTP and Base on HTTPS. It is recommended that you select Base on HTTP only by default.

Table 3-2 provides the parameters for Web Service. Table 3-2 Parameters for the JMS server Parameter

Description

Default Value

WebSerivice IP

Displays the IP address of the Web server.

The IP of U2000 server

HTTP Port

Set the port.

9997

Register JMS Service

Sets whether to use JMS.

Enable

Base on HTTP/Base on HTTPS

Choose the protocol to be used.

HTTP

6 Click the Advanced tab, set the parameters for advanced items.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

3-9

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

3 Deploying and Configuring the XML NBI

7 Choose the item in the left object tree, set the parameters in the right windows. Refer Table 3-3 for details. Table 3-3 Parameters for the Advanced Items Parameter

Value

Description

iView Log Switch

Open, Close

Enables or disables iView internal logs for the XML Framework.

Default Value: Open iView Log Level

All, Trace, Warning, Error Default Value: Warning

Max Debug Folder Size

100-1024 MB Default Value: 100MB

Framework Log Switch

Open, Close Default Value: Open

Product Log Switch

Debug, Info, Warn, Error, Fatal Default Value: Info

Framework Log Level

Debug, Warn, Error Default Value: Warn

3-10

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Sets the iView Debug Level. Namely, the system will record the selected level iView log in the log files. When the debug folder reaches the maximum size, the five oldest debug file will be deleted. Enables or disables the logs of the XML Framework. Specifies the level of the product log. Namely, the system will record the selected level product log in the log files. Specifies the Level of Trace Information to be placed in Log File. Namely, the system will record the selected level log in the log files. Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

3 Deploying and Configuring the XML NBI

Parameter

Value

Description

Log Queue Size

10 to 2147483647

Indicates the queue size for asynchronous logs.

Default Value: 10000 Product Log Max Backup Index

1 to 100

Product Log Max File Size

1 to 100 M

Default Value: 40

Default Value: 5 M

Encoding Format

Configure Domain Name

UTF-8, GBK

Specifies the maximum number of the product log files. When the parameter value reaches a specified value, the system will generate new file to displace the older log file. The size of the product log file. When the size of the file is greater than the maximum size, the system will generate the new log file.

Default Value: UTF-8

Specifies the encoding format of the files.

Default Value: Huawei/ U2000

Indicates the name of a managed domain.

8 Click OK to complete the configuration. 9 Optional: In the case of a distribute HA system with multiple NICs, if you enter the IP address of the master server to deploy XML NBI, and this IP address is not in the relevant address droplist, the Address for Standby Server dialog box is displayed. 1.

Issue 05 (2010-11-19)

You must enter the IP address of the XML NBI on the standby server.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

3-11

3 Deploying and Configuring the XML NBI

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

CAUTION l You can enter any IP address of the standby server (except 127.0.0.1). l You can set the same IP address or different IP addresses for the JMS Server IP and Web Server IP fields. l Ensure that the input IP address is correct. That is, the standby server should be able to communicate with the upper-layer NMS successfully with the input IP address. l The XML NBI searches for the IP configuration list (hosts file) of the computer automatically. Additionally, the first IP address in the configuration list is bound to the JMS Server IP. In the case of a single IP address, you need not set the JMS Server IP. In the case of multiple IP addresses, you need to set the JMS Server IP because the bound IP address is unknown. When setting the JMS Server IP field, you need to set it to an IP address that the upper-layer NMS can have access to. The same as the Web Server IP. 2.

Click OK.

10 Wait until the dialog box is displayed to prompt the success message. 11 Click OK, complete add the instance. 12 The dialog box is displayed, prompt that restart all of the NMS service. 13 Click OK, close the dialog box. 14 Log in to the System Monitor. Restart all services of the U2000. 15 In the System Monitor client, check the Status of the XML service and JMS service. If all the processes are running, the XML NBI is enabled successfully.

----End 3-12

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

3 Deploying and Configuring the XML NBI

3.6 Configuring the XML NBI In order to enable the XML NBI, even though you have installed XML NBI component, you need configure the XML parameters accord to NMS planning. Also, you can modify the parameters by configuring XML NBI again. Generally, general parameters are mandatory and advanced items are optional but the default values are recommended. Every advanced item is independent and you need not set the parameters.

Prerequisite l

Log in to the Solaris or SUSE Linux OS as the root user.

l

Log in to the Windows OS as the Administrator user.

l

In a HA system, configure the XML interface on the active server.

l

The NMS Maintenance Suite server installed on the master and slave servers must be started.

l

The System Monitor server of the U2000 must be started.

l

The Database server process must be in the Running state.

l

The NMS Maintenance Suite client communicates with the NMS Maintenance Suite server in the normal state.

l

The XML NBI instance must be added. Otherwise, add the related XML NBI instance first.

l

In a distributed system, you only need to log in to the NMS maintenance tool server of the master server to perform this operation.

l

In a high availability system, you only need to log in to the NMS maintenance tool server of the primary site to perform this operation.

Context

Procedure 1 Log in to the client of the NMS Maintenance Suite. For details, see 3.3 Logging in to the Client of the NMS Maintenance Suite. 2 On the NMS Maintenance Suite client, choose NBI > Configure the XML interface instance from the Main Menu. The dialog box is displayed. 3 In the General tab, set the parameters for basic items.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

3-13

3 Deploying and Configuring the XML NBI

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4 Configure the JMS server. 1.

Enter the IP and JMS Server Port, the default IP is the IP address of NMS server and the default port is 61616.

2.

Optional: Select Base on SSL, set SSL Port, the default port is 61617. NOTE

l The JMS server is a message server located between the upper layer OSS and the interfaces for JMS communication. l JMS Server and U2000 server could run in different PC or workstation, but you must ensure it is valid. It is recommended you use the default value, depoly the JMS server and U2000 server in the same PC or workstation.

Table 3-4 provides the parameters for JMS Server. Table 3-4 Parameters for the JMS server Parameter

Description

Default Value

IP

Indicates the IP address of the JMS server.

The IP address of U2000 server.

JMS Server Port

Indicate the port ID used for the JMS server.

61616

l Port 61616 is used for non-SSL JMS server. l Port 61617 is used for SSL JMS server.

3-14

JMS User Name

The user name to access the JMS server.

admin

JMS Password

The password to access the JMS server.

test1234

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

3 Deploying and Configuring the XML NBI

5 Configure the Web service. 1.

Choose IP from the drop-list, the default IP is the IP address of NMS server.

2.

Optional: Select Register JMS Service, enable the JMS Service. NOTE

If you have not select the check box, the JMS service is disabled.

3.

Select the protocol, Base on HTTP or Base on HTTPS, set the Port, it is 9997 by default. NOTE

You cannot select both of the Base on HTTP and Base on HTTPS. It is recommended that you select Base on HTTP only by default.

Table 3-5 provides the parameters for Web Service. Table 3-5 Parameters for the JMS server Parameter

Description

Default Value

WebSerivice IP

Displays the IP address of the Web server.

The IP of U2000 server

HTTP Port

Set the port.

9997

Register JMS Service

Sets whether to use JMS.

Enable

Base on HTTP/Base on HTTPS

Choose the protocol to be used.

HTTP

6 Click the Advanced tab, set the parameters for advanced items.

7 Choose the item in the left object tree, set the parameters in the right windows. Refer Table 3-6 for details.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

3-15

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

3 Deploying and Configuring the XML NBI

Table 3-6 Parameters for the Advanced Items Parameter

Value

Description

iView Log Switch

Open, Close

Enables or disables iView internal logs for the XML Framework.

Default Value: Open iView Log Level

All, Trace, Warning, Error Default Value: Warning

Max Debug Folder Size

100-1024 MB Default Value: 100MB

Framework Log Switch

Open, Close Default Value: Open

Product Log Switch

Debug, Info, Warn, Error, Fatal Default Value: Info

Framework Log Level

Debug, Warn, Error Default Value: Warn

Log Queue Size

10 to 2147483647 Default Value: 10000

Product Log Max Backup Index

1 to 100

Product Log Max File Size

1 to 100 M

Default Value: 40

Default Value: 5 M

Encoding Format

Configure Domain Name

3-16

UTF-8, GBK

Sets the iView Debug Level. Namely, the system will record the selected level iView log in the log files. When the debug folder reaches the maximum size, the five oldest debug file will be deleted. Enables or disables the logs of the XML Framework. Specifies the level of the product log. Namely, the system will record the selected level product log in the log files. Specifies the Level of Trace Information to be placed in Log File. Namely, the system will record the selected level log in the log files. Indicates the queue size for asynchronous logs. Specifies the maximum number of the product log files. When the parameter value reaches a specified value, the system will generate new file to displace the older log file. The size of the product log file. When the size of the file is greater than the maximum size, the system will generate the new log file.

Default Value: UTF-8

Specifies the encoding format of the files.

Default Value: Huawei/ U2000

Indicates the name of a managed domain.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

3 Deploying and Configuring the XML NBI

8 Click OK to complete the configuration. 9 Optional: In the case of a distribute HA system with multiple NICs, if you enter the IP address of the master server to deploy XML NBI, and this IP address is not in the relevant address droplist, the Address for Standby Server dialog box is displayed. 1.

You must enter the IP address of the XML NBI on the standby server.

CAUTION l You can enter any IP address of the standby server (except 127.0.0.1). l You can set the same IP address or different IP addresses for the JMS Server IP and Web Server IP fields. l Ensure that the input IP address is correct. That is, the standby server should be able to communicate with the upper-layer NMS successfully with the input IP address. l The XML NBI searches for the IP configuration list (hosts file) of the computer automatically. Additionally, the first IP address in the configuration list is bound to the JMS Server IP. In the case of a single IP address, you need not set the JMS Server IP. In the case of multiple IP addresses, you need to set the JMS Server IP because the bound IP address is unknown. When setting the JMS Server IP field, you need to set it to an IP address that the upper-layer NMS can have access to. The same as the Web Server IP. 2.

Click OK.

10 The dialog box is displayed, prompt that restart all of the NMS service. 11 Click OK, close the dialog box. 12 Log in to the System Monitor. Restart all services of the U2000. 13 In the System Monitor client, check the Status of the XML service and JMS service. If all the processes are running, the XML NBI is enabled successfully. Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

3-17

3 Deploying and Configuring the XML NBI

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

----End

3-18

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4

4 Maintaining the XML NBI

Maintaining the XML NBI

About This Chapter This chapter provides instructional suggestions for the maintenance conditions and routine operations for the XML interface. This chapter also describes the basic operation for maintaining the XML interface. In addition, this chapter describes how to solve the problems that may occur during maintenance, which can help maintenance personnel to solve the problems quickly. 4.1 Requirements for Maintenance Staff This section describes the requirements for maintenance staff. 4.2 Routine Maintenance By Routine Maintenance, faults such as malfunction in the system operation can be detected in time and countermeasures are adopted to properly handle the problem. In this way, hidden troubles are cleared to prevent the occurrence of an accident. It is recommended that you perform routine maintenance once a week. 4.3 Logging In to the System Monitor Client The U2000 System Monitor Client uses the client/server model. To perform an operation, you need to log in to the server through the U2000 client. 4.4 Stopping the XML NBI If you need not use the XML NBI, you can stop the XML process by using the System Monitor client. 4.5 Disabling the XML NBI If you need not use the XML NBI, you can disable the related XML processes so that the processes are not started together with the nmsuser. 4.6 Restarting the XML NBI This topic describes how to restart the XML NBI. 4.7 Deleting the XML Interface Instance You can delete an instance for the XML interface if it is not in use, which enhances the running efficiency of the U2000. 4.8 Deleting the XML NBI Component You can delete the component for the XML NBI if it is not in use, which enhances the running efficiency of the U2000. Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

4-1

4 Maintaining the XML NBI

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4.9 FAQ This section describes the identifying and handling methods for common failures in the system.

4-2

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4 Maintaining the XML NBI

4.1 Requirements for Maintenance Staff This section describes the requirements for maintenance staff. To guarantee the smooth maintenance and rapid problem solving, the maintenance staff are required to have the following experiences: l

Be familiar with the basic operations of the PC, Sun workstation, Windows, Solaris and Linux operating systems.

l

Have a good understanding of the XML technology.

l

Understand concepts of the telecommunication management network (TMN) and know the basic networking architecture of the U2000 well.

l

Be familiar with the configuration and the operations of enabling and disabling the U2000 XML interface. NOTE

For maintenance of the workstation, refer to the maintenance manual provided by its supplier.

4.2 Routine Maintenance By Routine Maintenance, faults such as malfunction in the system operation can be detected in time and countermeasures are adopted to properly handle the problem. In this way, hidden troubles are cleared to prevent the occurrence of an accident. It is recommended that you perform routine maintenance once a week.

Checking the XML Service l

When the U2000 single server is running, log in to the client of Sysmonitor which monitors the U2000 process. Check whether the XML Service processes are running properly.

l

In the U2000 high availability system, run the following command in the active server to query the operating status of the XML Service processes. # ps -ef | grep xml

The XML service operates normally only when the outputs of the XML Service process have their respective IDs NOTE

The active server refers to the host computer in use. Normally, a high availability system uses only one active server. If the JMS service is started, you need to check whether the JMS service process is started. The method of checking the JMS service process is the same as that of the XML service.

Backing up the logs of the U2000 XML Interface The log information of the U2000 XML interface is saved in the %IMAPROOT%\server\log \nbi directory. Back up the log files regularly in case they occupy too much of the system disk space. The log files records the running information of the U2000 XML interface and the operation performed by the NMS/OSS through the U2000 XML interface. If an error occurs when the U2000 XML interface is running, you can refer to the log files to do the troubleshooting. If you want to back up the log information of the U2000 XML interface, manually copy the log information to a specified directory. Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

4-3

4 Maintaining the XML NBI

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

NOTE

In the case of the Solaris OS and Linux OS, the environment variable is represented by $Variable (Variable indicates the name of the variable). In the case of the Windows OS, the environment variable is represented by %Variable% (Variable indicates the name of the variable). The environment variable $IMAP corresponds to the installation directory of the U2000 server. l In the case of the Solaris OS and Linux OS, the U2000 server is installed in the /opt/U2000/server directory by default. Hence, $IMAP corresponds to /U2000/server/conf. l In the case of the Windows OS, the U2000 server is installed in the C:\U2000\server directory by default, Hence, %IMAP% corresponds to C:\U2000\server\conf and %IMAPROOT% corresponds to C:\U2000.

4.3 Logging In to the System Monitor Client The U2000 System Monitor Client uses the client/server model. To perform an operation, you need to log in to the server through the U2000 client.

Prerequisite Before login, ensure that the U2000 client and server are connected normally, and the server works correctly.

Context l

The default port number of the server is 31030. Do not change it in normal conditions. Otherwise, you cannot log in to the U2000 server.

l

The login mode is classified into the SSL mode and the common mode. In SSL mode, the data is encrypted when being transmitted between the client and the server. In common mode, the data is not encrypted during transmission.

l

The port used for login in common mode is different from that in SSL mode. The port is 31030 in common mode, and 31080 in security (SSL) mode.

l

If you do not log in during the preset period after the previous login, the U2000 disables or delete the user account.

l

If you never use a new user account for login, the account is not restricted to these rules, that is, the U2000 does not set it to be invalid or delete it.

Procedure 1 Double-click the related shortcut icon on the desktop to start the system monitor client. 2 In the Login dialog box, select a server from the Server drop box. NOTE

If there is no server to select, do as the followings: 1. Click

on the right of Server drop box.

2. In the Server List dialog box, click Add. 3. In the Add Server Information dialog box, specify Name and Server Name(or IP Address), and then select a login mode. Click OK. 4. In the Server List dialog box, click OK.

4-4

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4 Maintaining the XML NBI

3 In the Login dialog box, enter the user name and password. The user name and password are the same as those for the U2000 client. 4 Click Login. NOTE

l If the user name and the password are correct, the Loading dialog box is displayed, indicating the loading progress. l If the user name or password is wrong, the Information dialog box prompts cannot login. l If the password is to expire in the specified days, the system prompts you to change the password before the expiration date. l If the license is to expire in the specified days, the system notifies you of the expiration date. l If you use a temporary license, you are prompted to apply for an official license.

----End

4.4 Stopping the XML NBI If you need not use the XML NBI, you can stop the XML process by using the System Monitor client.

Prerequisite l

On Solaris or SUSE Linux, you must have the nmsuser user rights.

l

On Windows, you must have the administrator user rights.

l

In an HA system, the XML interface is configured on the active server.

l

The U2000 must be started.

l

The XML Service and JMS Service processes are in the running state.

Context NOTE

After you add an instance of the XML interface by using the NMS Maintain Tool, the startup mode is Automatic by default. The XML interface process is started together with the U2000.

Procedure 1 Log in to the System Monitor. 2 On the System Monitor, click the Process Monitor tab.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

4-5

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4 Maintaining the XML NBI

3 Select the XML Service process, right-click, and then choose Stop the Process from the shortcut menu. 4 The dialog box displayed, click Yes. 5 Follow step 3 to step 4, stop JMS Service processes. 6 In the System Monitor client, when Status of the relevant XML processes is Stopped, the operation is successful.

----End

4-6

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4 Maintaining the XML NBI

4.5 Disabling the XML NBI If you need not use the XML NBI, you can disable the related XML processes so that the processes are not started together with the nmsuser.

Prerequisite l

On Solaris or SUSE Linux, you must have the nmsuser user rights.

l

On Windows, you must have the administrator user rights.

l

In an HA system, the XML interface is configured on the active server.

l

The U2000 must be started.

l

The XML Service and JMS Service processes are in the running state.

Procedure 1 Log in to the System Monitor. 2 On the System Monitor, click the Process Monitor tab.

3 Select the XML Service process, right-click, and then choose Startup Mode > Disabled from the shortcut menu. 4 Select the JMS Service process, right-click, and then choose Startup Mode > Disabled from the shortcut menu. 5 In the System Monitor client, when Startup Mode of the relevant XML processes is Disabled, the operation is successful.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

4-7

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4 Maintaining the XML NBI

----End

4.6 Restarting the XML NBI This topic describes how to restart the XML NBI.

Prerequisite l

On Solaris or SUSE Linux, you must have the nmsuser user rights.

l

On Windows, you must have the administrator user rights.

l

In an HA system, the XML interface is configured on the active server.

l

The U2000 must be started.

l

The XML Service and JMS Service processes are in the Stopped state.

Procedure 1 Log in to the System Monitor. 2 On the System Monitor, click the Process Monitor tab.

4-8

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4 Maintaining the XML NBI

3 In the System Monitor client, select the JMS Service process, right-click, and then choose Start the Process from the shortcut menu. 4 In the System Monitor client, select the XML Service process, right-click, and then choose Start the Process from the shortcut menu. 5 In the System Monitor client, when Status of the relevant XML processes, namely JMS Service and XML Service are Running, the operation is successful.

----End

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

4-9

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4 Maintaining the XML NBI

4.7 Deleting the XML Interface Instance You can delete an instance for the XML interface if it is not in use, which enhances the running efficiency of the U2000.

Prerequisite l

Log in to the Solaris or SUSE Linux OS as user root.

l

Log in to the Windows OS as user Administrator.

l

In a HA system, configure the XML interface on the active server.

l

The NMS Maintenance Suite server installed on the master and slave servers must be started.

l

The U2000 must be operating.

l

The NMS Maintenance Suite client communicates with the NMS Maintenance Suite server in the normal state.

l

It is recommended that you stop the XML interface before delete the instance.

l

In a distributed system, you only need to log in to the NMS maintenance tool server of the master server to perform this operation.

l

In a high availability system, you only need to log in to the NMS maintenance tool server of the primary site to perform this operation.

Context

Procedure 1 Log in to the client of the NMS Maintenance Suite. For details, see 3.3 Logging in to the Client of the NMS Maintenance Suite. 2 On the NMS Maintenance Suite client, click the Instance tab. Select the AgentXML instance from the instance list, right-click, and choose Delete Instance

3 Click OK. After the confirmation, the NMS Maintenance Suite begins deleting the AgentXML instance. 4 Click the Deployment Package tab, if the Instance Count of the XML NBI deployment package is zero, that means the deletion success. 4-10

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4 Maintaining the XML NBI

NOTE

After the AgentXML instance is deleted, the Sysmonitor does not display the information about the XML Service process, JMS Service process. If you need to re-enable the XML interface, refer to 3 Deploying and Configuring the XML NBI.

----End

4.8 Deleting the XML NBI Component You can delete the component for the XML NBI if it is not in use, which enhances the running efficiency of the U2000.

Prerequisite l

Log in to the Solaris or SUSE Linux OS as user root.

l

Log in to the Windows OS as user Administrator.

l

In a HA system, configure the XML interface on the active server.

l

The NMS Maintenance Suite server installed on the master and slave servers must be started.

l

The U2000 must be operating.

l

The NMS Maintenance Suite client communicates with the NMS Maintenance Suite server in the normal state.

l

Ensure you have deleted the XML NBI instance.

l

In a distributed system, you only need to log in to the NMS maintenance tool server of the master server to perform this operation.

l

In a high availability system, you only need to log in to the NMS maintenance tool server of the primary site to perform this operation.

Context

Procedure 1 Log in to the client of the NMS Maintenance Suite. For details, see 3.3 Logging in to the Client of the NMS Maintenance Suite. 2 On the NMS Maintenance Suite client, click Deployment Package tab, check whether the instance count of XML NBI deployment package is zero. l

If Instance Count is not zero, you need to deleted the XML NBI instance first.

l

If Instance Count is zero, choose Deploy > Remove Component from the Main Menu. The dialog box is displayed.

3 Select Northbound XML Interface component, click OK. The deleting of the component is started. NOTE

You can not delete the components which are basic or have not installed. You can not select them in the left window.

4 Wait until the message the component is successfully removed is displayed. Click OK. Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

4-11

4 Maintaining the XML NBI

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

5 View the Deployment Package list, the Northbound XML Interface deployment package not exist indicate that the operation is successful. ----End

4.9 FAQ This section describes the identifying and handling methods for common failures in the system. NOTE

For the irremovable faults, please dial 800-830-2118 (available at any time) for technical support from Huawei, and work together with engineers from Huawei to clear the faults.

4.9.1 Failure in Starting the U2000 XML Interface 4.9.2 Whether the U2000 Successfully Enables the XML Interface 4.9.3 Whether the U2000 XML Interface is Licensed

4.9.1 Failure in Starting the U2000 XML Interface Possible Cause A failure in starting the U2000 XML interface is usually caused by incorrect configuration of the configuration file. It is recommended that you perform the following steps:

Procedure 1 Open the %IMAPROOT%\server\nbi\xml\conf\communicate.cfg configuration file. Check whether the configuration items (such as IP address, port, mode, and license file path) of MDP are correct. If the configuration items are incorrect, configure the XML interface instance again by following 3 Deploying and Configuring the XML NBI. 2 Open the %IMAPROOT%\server\nbi\xml\conf\database.cfg configuration file. Check whether the configuration items (such as database type, IP address, and port) of the database are correct. If the configuration items are incorrect, configure the XML interface instance again by following 3 Deploying and Configuring the XML NBI. ----End

4.9.2 Whether the U2000 Successfully Enables the XML Interface l

In the window of the System Monitor, view whether XML Service process is in the running state. If so, it indicates that the XML interface is started successfully.

l

To determine whether the XML interface is started, do as follows: enter the WSDL address of the Web service that the system should support in the browser and check whether the output is correct. – In the browser, enter http://server IP:port/OperationsSystemRetrieval?wsdl. If the WSDL definition is displayed in the browser, it indicates that the XML interface is started successfully.

4-12

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4 Maintaining the XML NBI

– If the error message "cannot find the server" is displayed, it indicates that the XML interface is not started.

4.9.3 Whether the U2000 XML Interface is Licensed l

Log in to the U2000 client and view the license. Choose Help > About > License from the Main Menu of the U2000 client to view whether the U2000 license supports the preceding XML interface functions.

l

View the XML interface functions supported by the license file of the U2000.

Table 4-1 Meanings of license items License Item

Function

Value

LNSDPENES04

Indicates the number of users that are connected to the XML interface. In details, the number of users that can concurrently send requests to the XML interface every 60s.

0 to 80000

LNSDXMLNOT01

Indicates whether the alarm reporting and notification reporting functions are authorized.

0: unauthorized

Indicates whether the function of querying the alarms related to transport NEs is authorized.

0: unauthorized

Indicates whether the function of querying the inventory related to transport NEs is authorized.

0: unauthorized

Indicates the number of equivalent transport NEs for which you can query alarms.

0 to 80000

LNSDXMLA01

LNSDXMLA02

LNSDPENEX01

1: authorized

1: authorized

1: authorized

The user can query networkwide alarms only when the number of equivalent transport NEs is smaller than or equal to the authorized value of this license item.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

4-13

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

4 Maintaining the XML NBI

License Item

Function

Value

LNSDPENEX02

Indicates the number of equivalent transport NEs for which you can query inventory.

0 to 80000

The user can query networkwide NEs only when the number of equivalent transport NEs is smaller than or equal to the authorized value of this license item. LNSDXMLA03

LNSDXMLA04

LNSDPENEX05

Indicates whether the function of querying the alarms related to router and security NEs is authorized.

0: unauthorized

Indicates whether the function of querying the inventory data related to router and security NEs is authorized.

0: unauthorized

Indicates the number of equivalent router and security NEs for which you can query alarms.

0 to 80000

1: authorized

1: authorized

The user can query networkwide alarms only when the number of equivalent router and security NEs is smaller than or equal to the authorized value of this license item. LNSDPENEX06

Indicates the number of equivalent router and security NEs for which you can query inventory.

0 to 80000

The user can query networkwide NEs only when the number of equivalent router and security NEs is smaller than or equal to the authorized value of this license item.

4-14

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

A

A Relations Between License and XML Interface

Relations Between License and XML Interface

This part introduces the relations between license and U2000 northbound XML interface. The U2000 license controls the software of XML interface in the following four dimensions: l

Interface function

l

Technical domain

l

Management capacity

l

Number of OSS connections

l

The first three dimensions depend on each other. The U2000 divides the license according to the dimensions to dynamically control the XML software.

Figure A-1 Main dimensions

technical domain

m ge na a M

t en

y cit pa a C

Interface Function

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

A-1

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

A Relations Between License and XML Interface

Table A-1 Dimension description Dimension

Meaning

Interface function

l Alarm and inventory l Service provisioning and test diagnosis l Performance l Common l Transport

Technical domain

l Router and Metro including security l Access Management capacity

Physical inventory: Controls NEs. The unit is number of equivalent NEs.

Number of OSS connections

Indicates the maximum number of OSS users that can be online concurrently.

On Solaris or SUSE Linux, view the license as user root. Use the text viewer to view the contents of the $IMAPROOT/server/etc/conf/license/ONXXXXXXX.dat file. On Windows, view the license as user administrator. Use the text viewer to view the contents of the %IMAPROOT%\server\etc\conf\license\ONXXXXXXX.dat file. Here each "X" represents an integer ranging from 0 to 9. Refer to Table A-2 for the details of license control items. Table A-2 Description for License Item

A-2

License Control Item

Abbreviations

Value

NBI-XML Connection Amount License

LNSDPENES04

0~20000

Per Equivalent NE License for NBI-XML Alarm& Inventroy-Transmission Network

LNSDPENEX01

0~300000

Per Equivalent NE License for NBI-XML PerformanceTransmission Network

LNSDPENEX03

0~300000

Per Equivalent NE License for NBI-XML Service Provisioning and Test&DiagnosisTransmission Network

LNSDPENEX04

0~300000

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

Issue 05 (2010-11-19)

A Relations Between License and XML Interface

License Control Item

Abbreviations

Value

Per Equivalent NE License for NBI-XML Alarm& Inventroy-IP

LNSDPENEX05

0~300000

Per Equivalent NE License for NBI-XML PerformanceIP

LNSDPENEX07

0~300000

Per Equivalent NE License for NBI-XML Service Provisioning and Test&Diagnosis-IP

LNSDPENEX08

0~300000

Per Narrowband Port License for NBI-XML Alarm-Access Network

LNSDPENEC08

0~300000

Per Broadband Port License for NBI-XML Alarm-Access Network

LNSDPENEC28

0~300000

Per Narrowband Resource License for NBI-XML Service Provisioning-Access

LNSDPENEC18

0~300000

Per Broadband Resource License for NBI-XML Service Provisioning-Access

LNSDPENEC31

0~300000

Per Narrowband Resource License for NBI-XML Performance-Access

LNSDPENEC13

0~300000

Per Broadband Resource License for NBI-XML Performance-Access

LNSDPENEC32

0~300000

Compatible License for XML Inventory NBI-Access

LNSDNELCR80

0~300000

Per PON Terminal Resource License for NBI-XML Service Provisioning-Access Network

LNSDNELCR88

0~300000

Per PON Terminal Resource License for NBI-XML Alarm-Access Network

LNSDNELCR89

0~300000

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

A-3

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

B

B Service Port Description

Service Port Description

This chapter provides information on service ports that are used by the XML interface and how to use and query these service ports. B.1 Service Ports Used by the XML Interface B.2 Notes and Precautions

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

B-1

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

B Service Port Description

B.1 Service Ports Used by the XML Interface

B-2

Service Name

Service Port/ Protocol

Direction (in relation to the server)

Function

Remarks

HTTP service

9997/TCP

IN

Listens to the access of upperlayer NMS

If there are routers or firewalls on the network between the U2000 server and the upperlayer NMS, check whether the service port is filtered.

HTTPS service

443/TCP

IN

Listens to the access of upperlayer NMS

If there are routers or firewalls on the network between the U2000 server r and the upperlayer NMS, check whether the service port is filtered.

JMS service

61616/TCP

IN

Listens to the access of upperlayer NMS

If there are routers or firewalls on the network between the U2000 server r and the upperlayer NMS, check whether the service port is filtered.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

B Service Port Description

Service Name

Service Port/ Protocol

Direction (in relation to the server)

Function

Remarks

JMS service

61617/TCP

IN

Listens to the SSL-mode access of upperlayer NMS

If there are routers or firewalls on the network between the U2000 server r and the upperlayer NMS, check whether the service port is filtered.

(SSL)

B.2 Notes and Precautions In the practical communication process, the source (the server) and the sink (the client) use relevant ports. Usually you only need to specify the source port, and the sink port is dynamically created. Note the following during the project implementation: l

The service ports used by the NMS should not be closed. Run the following command to view the system service ports:

netstat -an

If there are routers or firewalls between the source and the sink, check all ports used by the source and the sink. Make sure that these ports can be normally turned up to support the communication between the sources and sinks.

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

B-3

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

C Product List

C

Product List

Equipment series

Product

OSN

OptiX OSN 9500 OptiX OSN 7500 OptiX OSN 3500 OptiX OSN 2500 OptiX OSN 1500 OptiX OSN 2000 OptiX OSN 500 OptiX OSN 2500 REG

PTN

OptiX PTN 1900 OptiX PTN 3900 OptiX PTN 912 OptiX PTN 910 OptiX PTN 950

RTN

OptiX RTN 610 OptiX RTN 620 OptiX RTN 605

OTN

OptiX OSN 1800 OptiX OSN 3800 OptiX OSN 6800 OptiX OSN 8800 T32

SDH

Issue 05 (2010-11-19)

OptiX 155C

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

C-1

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

C Product List

Equipment series

Product OptiX 155S OptiX 155/622B_I OptiX 155/622B_II OptiX 2500 OptiX 2500 REG OptiX Metro 100 OptiX Metro 200 OptiX Metro 500 OptiX 155/622H(Metro 1000) OptiX Metro 1000V3 OptiX Metro 1050 OptiX Metro 1100 OptiX 155/622(Metro 2050) OptiX 2500+(Metro 3000) OptiX Metro 3100 OptiX 10G(Metro 5000)

WDM

OptiX BWS 320GV3 OptiX BWS 1600G OptiX BWS 1600G OLA OptiX OTU40000 OptiX Metro 6020 OptiX Metro 6040 OptiX Metro 6040V2 OptiX Metro 6100 OptiX Metro 6100V1 OptiX Metro 6100V1E

Metro

OptiX Metro 100 OptiX Metro 200 OptiX Metro 500 OptiX Metro 1000V3

C-2

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

Equipment series

C Product List

Product OptiX Metro 1050 OptiX Metro 1100 OptiX Metro 3100

Router

8070 routers: NE05, NE08, NE08E, NE16, NE16E, NE20, NE20E 8011 routers: NE40, NE80 8090 routers: NE40E, NE80E, NE5000E R1600, R1700, R2500, R2600, R3600, and R4000, S2000, S2000B, S2000C, S2000EA, S3000, S3500, and S3500EA, S3900, S5000, S5100EI, S5500, S5600, S6500, S7800, S8000, and S8500 SR8800

Switch

CX200D CX200 CX300 CX380 CX600 S9300 S5300 S3300

Access

MA5105(BSL) MA5100V2 ESRV5R3 ESRV5R3 MD5500V1 UA5000 ESR8850(8850)V5R5 MA5100V1

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

C-3

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

C Product List

Equipment series

Product MA5300V1 ISN8850V5R2 Radium8750 UA5000(PVMV1) UA5000(PVU) MA5600V3 MA5600T UA5000(IPMB) MA5605 MA5680T MA5662 SRG3200 ATN910 MA5606T MA5615 MA5626E MA5620E MA5651 MA5620G MA5626G MA5651G MA5610 MA5616

C-4

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D

D Object Naming Rules

Object Naming Rules

This section describes the naming rules of objects of the U2000 XML interface according to the naming rules recommended by MTOSI. D.1 MD D.2 OS D.3 ME D.4 TL D.5 EH D.6 EQ D.7 PTP D.8 FTP D.9 CTP D.10 RESOURCESITE D.11 TUNNELPOLICY D.12 TMD D.13 CC D.14 PG D.15 SNC D.16 EPG D.17 EXPLICITPATH D.18 FDFR D.19 VRRP D.20 TCPROFILE

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

D-1

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.1 MD Object Name

MD

Parameter Naming Rules Recommended by MTOSI

MD CompanyName /MDName Note: nam indicates the alias of the name space defined by the object naming XSD of MTOSI. Its meaning is the same as that of nam used in the following section.

Sample Parameter Names of the U2000 XML Interface

MD Huawei/U2000

Remarks

If multiple iManager U2000s need to be managed at the same time, change the U2000 names by configuring the MD name to ensure that each U2000 name is unique in the NMS management domain. For details, see 3.6 Configuring the XML NBI.

Object Name

OS

Parameter Naming Rules Recommended by MTOSI



D.2 OS

OS OSName

D-2

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

Object Name

OS

Sample Parameter Names of the U2000 XML Interface

OS Local NM

Remarks

If it is necessary to manage multiple iManager U2000 at the same time, modify the U2000 names through the configuration file to ensure that each U2000 OS name is unique in the NMS management domain.

Object Name

ME

Parameter Naming Rules Recommended by MTOSI



D.3 ME

MD CompanyName /MDName ME MEName

Sample Parameter Names of the U2000 XML Interface

MD Huawei/U2000 ME 3145728

Remarks

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

D-3

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.4 TL Object Name

TL

Parameter Naming Rules Recommended by MTOSI

MD CompanyName /MDName TL TLName

Sample Parameter Names of the U2000 XML Interface

MD Huawei/U2000 TL 2009-05-05 23:54:32 - 3

Remarks

D-4

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.5 EH Object Name

EH

Parameter Naming Rules Recommended by MTOSI

MD CompanyName /MDName ME MEName EH EHName

Sample Parameter Names of the U2000 XML Interface

MD Huawei/U2000 ME 3145740 EH / shelf=1/slot=1/sub_slot=0

Remarks

Issue 05 (2010-11-19)

Currently, the U2000 XML interface supports three types of EquipmentHolder objects: shelf, slot, and subslot. Rack and subshelf objects are not supported.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

D-5

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.6 EQ Object Name

EQ

Parameter Naming Rules Recommended by MTOSI

MD CompanyName /MDName ME MEName EH EHName EQ EQName

D-6

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

Object Name

EQ

Sample Parameter Names of the U2000 XML Interface

MD Huawei/U2000 ME 3145740 EH / shelf=1/slot=1/sub_slot=0 EQ 1

Remarks

Issue 05 (2010-11-19)

For Huawei equipment, the value of Equipment is always 1, that is, only one board can be installed in a slot.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

D-7

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.7 PTP Object Name

PTP

Parameter Naming Rules Recommended by MTOSI

MD CompanyName /MDName ME MEName PTP PTPName

Sample Parameter Names of the U2000 XML Interface

MD Huawei/U2000 ME 3145728 PTP / shelf=1/slot=3/domain=wdm/port=1

D-8

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

Object Name

PTP

Remarks

For naming rules for the shelf, slot, and subslot in a PTP name, refer to section "EquipmentHolder". The values of domain include sdh, wdm, eth, atm, sonnet, and ptn. Only the transport equipment has these attributes. The port names of the equipment of other domains, such as route and security, do not contain the domain field. For the IP domain, there is a cli_name field after the port field, for example, /shelf=1/slot=13/type=eth/port=0/ cli_name=Ethernet0/0/0.

D.8 FTP Object Name

FTP

Parameter Naming Rules Recommended by MTOSI

MD CompanyName /MDName ME MEName FTP FTPName

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

D-9

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

Object Name

FTP

Sample Parameter Names of the U2000 XML Interface

MD Huawei/U2000 ME 3145728 FTP / shelf=1/slot=3/sub_slot=1/domain=ptn/ type=ima/port=1

Remarks

For naming rules for the shelf, slot, and subslot in a FTP name, refer to section "EquipmentHolder". The values of domain include sdh, wdm, eth, atm, sonnet, and ptn. Only the transport equipment has these attributes. The port names of the equipment of other domains, such as route and security, do not contain the domain field. For the IP domain, there is a cli_name field after the port field, for example, /shelf=1/type=vlanif/port=1001/ cli_name=Vlanif1001.

D-10

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.9 CTP Object Name

CTP

Parameter Naming Rules Recommended by MTOSI



Sample Parameter Names of the U2000 XML Interface

MD CompanyName / MDName ME MEName PTP/FTP PTPName/FTPName CTP CTPName MD Huawei/U2000 ME 3145728 PTP /shelf=1/slot=2/ sub_slot=0/type=eth/port=1/ cli_name=GigabitEthernet2/0/1 CTP /sub_port=234

Remarks

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

D-11

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.10 RESOURCESITE Object Name

RESOURCESITE

Parameter Naming Rules Recommended by MTOSI

MD CompanyName /MDName RESOURCESITE RESOURCESITEName

Sample Parameter Names of the U2000 XML Interface

MD Huawei/U2000 RESOURCESITE 4063235

Remarks

D-12

This object is added by Huawei, which represents the transport WDM NE.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.11 TUNNELPOLICY Object Name

TUNNELPOLICY

Parameter Naming Rules Recommended by MTOSI



Sample Parameter Names of the U2000 XML Interface

Remarks

Issue 05 (2010-11-19)

MD CompanyName / MDName ME MEName TUNNELPOLICY TUNNELPOLICYName MD Huawei/U2000 ME 3145728 TUNNELPOLICY tnl_policy

This is a sample of renaming rules of tunnel policies extended by Huawei.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

D-13

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.12 TMD Object Name

TMD

Parameter Naming Rules Recommended by MTOSI



Sample Parameter Names of the U2000 XML Interface

Remarks

D-14

MD CompanyName / MDName ME MEName TMD TMDName MD Huawei/U2000 ME 3145728 TMD 20|

This is a sample of renaming rules of transmission descriptors.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.13 CC Object Name

CC

Parameter Naming Rules Recommended by MTOSI



Sample Parameter Names of the U2000 XML Interface

Remarks

Issue 05 (2010-11-19)

MD CompanyName / MDName ME MEName CC CCName MD Huawei/U2000 ME 3145728 CC PWSW=|556| 12.12.12.156|456|455|557|12.12.12.157| 458|457|12

Cross-connection (CC) indicates PW switches in the routing domain, static tunnels in the PTN domain, and cross-connections in the transport domain.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

D-15

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.14 PG Object Name

PG

Parameter Naming Rules Recommended by MTOSI



Sample Parameter Names of the U2000 XML Interface

Remarks

D-16

MD CompanyName / MDName ME MEName PG PGName MD Huawei/U2000 ME 3145728 PG /shelf=1/pg=1/ pos=17

This is a sample of renaming rules of protection groups in the transport domain.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.15 SNC Object Name

SNC

Parameter Naming Rules Recommended by MTOSI



Sample Parameter Names of the U2000 XML Interface

MD CompanyName / MDName ME MEName SNC SNCName MD Huawei/U2000 ME 3145728 SNC TUNNEL=3||||100||||

Remarks

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

D-17

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.16 EPG Object Name

EPG

Parameter Naming Rules Recommended by MTOSI



Sample Parameter Names of the U2000 XML Interface

Remarks

D-18

MD CompanyName / MDName ME MEName EPG EPGName MD Huawei/U2000 ME 3145728 EPG /pg=1/type=1

This is a sample of renaming rules of equipment protection groups in the transport domain.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.17 EXPLICITPATH Object Name

EXPLICITPATH

Parameter Naming Rules Recommended by MTOSI



Sample Parameter Names of the U2000 XML Interface

MD CompanyName / MDName ME MEName EXPLICITPATH EXPLICITPATHName MD Huawei/U2000 ME 3145728 EXPLICITPATH ex_path

Remarks

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

D-19

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.18 FDFR Object Name

FDFR

Parameter Naming Rules Recommended by MTOSI



Sample Parameter Names of the U2000 XML Interface

MD CompanyName / MDName ME MEName FDFR FDFRName MD Huawei/U2000 ME 3145728 FDFR VSI=555|vsinam

Remarks

D-20

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.19 VRRP Object Name

VRRP

Parameter Naming Rules Recommended by MTOSI



Sample Parameter Names of the U2000 XML Interface

MD CompanyName / MDName ME MEName PTP PTPName CTP CTPName VRRP VRRPName MD Huawei/U2000 ME 3145728 PTP /shelf=1/slot=1/ sub_slot=0/type=eth/port=0/ cli_name=GigabitEthernet1/0/0 CTP /sub_port=2 VRRP 360

Remarks

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

D-21

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

D Object Naming Rules

D.20 TCPROFILE Object Name

TCPROFILE

Parameter Naming Rules Recommended by MTOSI



Sample Parameter Names of the U2000 XML Interface

MD CompanyName / MDName TCPROFILE TCPROFILEName MD Huawei/U2000 TCPROFILE /type=cbqosprofile/ name=cbqosprofiletest

Remarks

D-22

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

E

E Layer Rate Description

Layer Rate Description

Table E-1 List of layer rates supported by the U2000 XML NBI

Issue 05 (2010-11-19)

No

Layer Rate

Description

1

LR_Not_Applicable

The layer is not relevant.

5

LR_E1_2M

2Mbit/s PDH signal

7

LR_E3_34M

34 Mbit/s PDH signal

8

LR_E4_140M

140 Mbit/s PDH signal

11

LR_VT2_and_TU12_VC12

VC12 SONET/SDH path signal

13

LR_Low_Order_TU3_VC3

VC3 SONET/SDH path signal

15

LR_STS3c_and_AU4_VC4

VC4 SONET/SDH path signal

16

LR_STS12c_and_VC4_4c

12xSTS-1/4xVC4 contiguous concatenation

17

LR_STS48c_and_VC4_16c

48xSTS-1/16xVC4 contiguous concatenation

18

LR_STS192c_and_VC4_64c

192xSTS-1/64xVC4 contiguous concatenation

19

LR_Section_OC1_STS1_and_ RS_STM0

STM-0 regenerator section

20

LR_Section_OC3_STS3_and_ RS_STM1

STM-1 regenerator section

21

LR_Section_OC12_STS12_an d_RS_STM4

STM-4 regenerator section

22

LR_Section_OC48_STS48_an d_RS_STM16

STM-16 regenerator section

23

LR_Section_OC192_STS192 _and_RS_STM64

STM-64 regenerator section

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

E-1

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

E Layer Rate Description

E-2

No

Layer Rate

Description

25

LR_Line_OC3_STS3_and_M S_STM1

STM-1 multiplex section

26

LR_Line_OC12_STS12_and_ MS_STM4

STM-4 multiplex section

27

LR_Line_OC48_STS48_and_ MS_STM16

STM-16 multiplex section

28

LR_Line_OC192_STS192_an d_MS_STM64

STM-64 multiplex section

41

LR_Optical_Multiplex_Section

For WDM wavelength bands

42

LR_Optical_Transmission_Se ction

For WDM entire optical signal. That is, it is used for OTS and OMS layers of OTM-n.m (n>=1).

43

LR_ATM_NI

For ATM network interfaces (UNI and NNI)

46

LR_PHYSICAL_ELECTRICAL

Analogue signal on electrical and physical media

47

LR_PHYSICAL_OPTICAL

Analogue signal on optical physical media

49

LR_OPTICAL_SECTION

Represents the wavelength termination for a non DWDM system. That is, it is used for all kinds of single-lambda ports.

50

LR_DIGITAL_SIGNAL_RA TE

Raw binary electrical signal of unspecified rate

72

LR_DSR_OC1_STM0

STM-0 digital signal rate

73

LR_DSR_OC3_STM1

STM-1 digital signal rate

74

LR_DSR_OC12_STM4

STM-4 digital signal rate

75

LR_DSR_OC24_STM8

STM-8 digital signal rate

76

LR_DSR_OC48_and_STM16

STM-16 digital signal rate

77

LR_DSR_OC192_and_STM6 4

STM-64 digital signal rate

78

LR_DSR_OC768_and_STM2 56

STM-256 digital signal rate

80

LR_DSR_2M

2 Mbit/s digital signal rate

83

LR_DSR_34M

34 Mbit/s digital signal rate

85

LR_DSR_140M

140 Mbit/s digital signal rate

87

LR_DSR_Gigabit_Ethernet

Gigabit Ethernet digital signal rate

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

E Layer Rate Description

No

Layer Rate

Description

88

LR_Section_OC24_STS24_an d_RS_STM8

STM-8 regenerator section

89

LR_Line_OC24_STS24_and_ MS_STM8

STM-8 multiplex section

90

LR_Section_OC768_STS768 _and_RS_STM256

STM-256 regenerator section

91

LR_Line_OC768_STS768_an d_MS_STM256

STM-256 multiplex section

96

LR_Ethernet

All Ethernet rates

97

LR_DSR_Fast_Ethernet

10/100 Mbit/s Ethernet

98

LR_Encapsulation

For Ethernet. The following encapsulation protocols apply: HDLC/PPP, HDLC/ LAPS, ML/PPP, and GFPTransparent or frame mapped types

99

LR_Fragment

Used for inverse multiplexing modeling (virtual concatenation for SONET/SDHand IMA)

100

LR_STS6c_and_VC4_2c

6xSTS-1/2xVC4 contiguous concatenation

101

LR_STS9c_and_VC4_3c

9xSTS-1/3xVC4 contiguous concatenation

29

LR_STS24c_and_VC4_8c

23xSTS-1/23xVC3 contiguous concatenation

113

LR_DSR_10Gigabit_Ethernet

10 Gbit/s Ethernet

8001

LR_Section_and_RS

Extended by HUAWEI

8002

LR_Line_and_MS

Extended by HUAWEI

8003

LR_ATM

ATM layer rate (extended by HUAWEI)

8004

LR_Optical_Supervision_Cha nnel

Optical monitoring layer rate (extended by HUAWEI)

107

LR_OCH_Transport_Unit_1

Optical channel transport Unit 1 (trail termination)

108

LR_OCH_Transport_Unit_2

Optical channel transport Unit 2 (trail termination)

109

LR_OCH_Transport_Unit_3

Optical channel transport Unit 3 (trail termination)

8006

Issue 05 (2010-11-19)

LR_OCH_Data_Unit_5G

trail and tandem connection monitoring/ termination

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

E-3

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

E Layer Rate Description

E-4

No

Layer Rate

Description

8007

LR_OCH_Transport_Unit_5G

trail termination

8010

LR_Pseudo_Wire

Extended by HUAWEI

303

LR_DVB_ASI

Digital Video Broadcast (ASI)

8023

LR_DVB_SDI

Digital Video Broadcast (SDI)

8024

LR_FICON_Express

Extended by HUAWEI

8021

LR_SAN_FC_400

Extended by HUAWEI

8022

LR_SAN_FC_1000

Extended by HUAWEI

8025

LR_HDTV

Extended by HUAWEI

201

LR_PON

Extended by HUAWEI

202

LR_MPLS_Path

MPLS path [extended by HUAWEI]

203

LR_MPLS_Channel

MPLS channel [extended by HUAWEI]

204

LR_IP_Path

IP tunnel [extended by HUAWEI]

205

LR_GRE_Path

GRE tunnel [extended by HUAWEI]

206

LR_LAG_Fragment

Link aggregation

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

F Glossary

F

Glossary

E Edge Termination Point

An Edge Termination Point (Edge TP) is a Termination Point (TP) that is at an entrance or exit point of a MultiLayer Subnetwork (i.e. add-drop or TPs that terminate links between two Subnetworks) topological.

Element Management System

The Element Management System (EMS) is used to manage (represent) a portion of a network which contains one or more MultiLayer Subnetworks. The EMS is used as the root of the naming tree in the NMLEML interface.

Equipment

An Equipment represents the manageable physical components of a Network Element such as the circuit packs, the fans and any other type of replaceable unit within the Network Element.

EquipmentHolder

An Equipment Holder shall represent resources of the Network Element that are capable of holding other physical components. Specific resources that are represented by an Equipment Holder object shall be for instance racks (bays), shelves, and slots or sub-slots.

L Location

Issue 05 (2010-11-19)

An area, position, or portion of space that somebody or something can occupy. It is further decomposed into a geographic place that relates to world-centric places and local location that relates to locally defined coordinate systems. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

F-1

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

F Glossary

M Managed Element

A Managed Element (ME) represents the EMS (management) view of a Network Element (NE).

MultiLayer Subnetwork

A MultiLayer Subnetwork represents the topology provided by the EMS system. The main services provided within a MultiLayer are the set-up and tear-down of Subnetwork Connection Subnetwork (SNC).

N Network Element

A Network Element (NE) is telecommunications hardware equipment that is addressable and manageable. NEs provide support or services to the user and can be managed through an Element Management System (EMS). An NE is a combination of hardware and software that primarily performs a telecommunications service function. A group of interconnected network elements form a network.

P

F-2

Party

Represents an individual, organization or organization unit. Party is an abstract concept that should be used in places where the business says something.

PartyRole

The part played by a party in a given context with any characteristics, such as expected pattern of behavior, attributes, and/or associations that it entails. PartyRole is an abstract concept that should be used in places where the business refers to a Party playing a Role.

Physical Termination Point

A Physical Termination Point (PTP) represents the actual or potential endpoint of a Topological Link. Essentially, this is a representation of a physical port.

ProductBundle

A type of Product that is comprised of other Product(s). The other Product(s) may be ProductBundle(s) or ProductComponent(s).

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

ProductSpecification

F Glossary

A detailed description of a tangible or intangible object made available externally in the form of a ProductOffering to Customers or other Parties playing a PartyRole. A ProductSpecification may consist of other ProductSpecifications supplied together as a collection. Members of the collection may be offered in their own right. ProductSpecifications may also exist within groupings, such as ProductCategories, ProductLines, and ProductTypes.

R Route

A Route represents the route of a Subnetwork Connection (SNC).An SNC route is represented as a partially ordered series ofCross Connects through which the SNC traverses.

S

Issue 05 (2010-11-19)

Service

All Services are characterized as either being a realization of a Product (CustomerFacingService) facing the Customer or how a Service is provisioned within a provider's infrastructure (ResourceFacingService) facing the resources. Services are defined by a ServiceSpecification. The purpose of the specification is twofold. First, it is used to define attributes, methods, and relationships that are common to all Services. Second, it provides a convenient point to define how Services interact with other parts business entities.

Service Access Point

A point of entry where the service can be accessed. This point of entry is always associated (directly or indirectly) with a physical resource (such as a PTP, a CTP). However, sometimes the SAP is an object or a logical resource that contains or identifies the support of the physical resource. (Customer Premise Equipment, a Mobile Terminal, a Set-top Box, an internet address).

ServiceCatalog

A grouping of Service Specifications that share common characteristics. For example one catalog could group all internet related Service Specifications.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

F-3

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

F Glossary

ServiceCharacteristicValue

A ServiceCharacteristicValue is a value passed over the Activation Interface to convey an individually set service characteristic (i.e. not reference in a ServiceTemplate) or to override a globally set characteristic value (present in a ServiceTemplate). A ServiceCharacteristicValue will apply only to the specific Service instance created.

ServiceDefinition

A type of Service Specification (from the SID) introduced for the purposes of Service Fulfillment. It defines ALL the ServiceSpecCharacteristics that must be used to create corresponding Service instances: l the ones which are set globally (the corresponding values are defined only in ServiceTemplates and are sometimes designated as "invariant") l and the ones which are set individually (the corresponding values can be defined only over the Activation Interface and are sometimes designated as "variant"). A ServiceSpecCharacteristic specified in a ServiceDefinition may be associated with ServiceSpecCharacteristicValues to restrict the typing information or to specify a default value.

F-4

ServiceOrderr

A Service Order is a type of request (as defined in the SID model). In particular, a service order is used to track and control the progress of a request for some action (e.g., provision or activation) on the services that comprise a given product instance. It should be mentioned that the OSS/J Order Management API (JSR 264) defines Service Order as follows: "A type of Request that represents a Customer Order's products decomposed into the services through which the products are realized. Service Orders are generated within the confines of the SM&O layer."

ServiceOrderItem

Service Order Items are used to represent the order aspects of the services associated with a given service order. There is one service order item for each service associated with a service order.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

F Glossary

ServiceRequest

A request made by the CRM layer to the SM&O layer as defined in the TMForum eTOM to take an action on one or more CFS instances given a product identifier, a product specification name and a related set of characteristics. This request can be realized by Template and by Value.

ServiceSpecCharacteristic

A characteristic quality or distinctive feature of a Service as represented in a ServiceSpecification (specialized as ServiceDefinition or ServiceTemplate). In particular it contains typing information which can be arbitrarily complex. A Service Spec Characteristic can be atomic or composite (also called "packages"). The components of a composite Service Spec Characteristic can in turn be atomic or composite.

ServiceSpecCharacteristicValue

A value that can be associated with a ServiceSpecCharacteristic in conformance with the specified typing information. l When associated with a ServiceSpecCharacteristic in a ServiceDefinition, it is used to restrict the typing information (in this case several ServiceSpecCharacteristicValues may be used) or to specify additional information (e.g. default value). l When associated with a ServiceSpecCharacteristic in a ServiceTemplate, it will apply globally to all the Service instances conformant to this ServiceTemplate. In this case, the ServiceSpecCharacteristicValue is set at the design stage when the ServiceTemplate is created, and it cannot be modified afterwards. A ServiceSpecCharacteristic present in a ServiceTemplate is sometimes qualified as being "invariant", since it cannot be modified after the creation of the ServiceTemplate (the term "globally set" can also be used"). A ServiceSpecCharacteristic which value is passed over the Activation Interface is sometimes qualified as being "variant", since the value must be given for each Service instance created (the term "individually set" can also be used).

Issue 05 (2010-11-19)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

F-5

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

F Glossary

F-6

ServiceSpecification

Changeable as well as invariant attributes, methods, relationships and constraints which define a Service. It can be conceptually thought of as a template that different Service instances can be instantiated from. Each of these Service instances will have the same invariant characteristics. However, the other characteristics of the instantiated Service will be specific to each instance.

ServiceSpecificationType

The ServiceSpecificationType class defines a generic category of ServiceSpecifications. Each ServiceSpecificationType serves to group a set of particular ServiceSpecifications that share the same behavior and other semantics. One result of this is to be able to more efficiently define a set of related Services that can be grouped together to form a higher-level Service. For example, a given higher-level Service might include VPN and QoS Services. If these Services are always used together, then they can be categorized using a common type.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

ServiceTemplate

Issue 05 (2010-11-19)

F Glossary

A type of Service Specification (from the SID) introduced for the purposes of Service Fulfillment. It defines specific ServiceSpecCharacteristicsValues for the globally set ServiceSpecCharacteristics that can be dynamically referenced by multiple Service instances during their lifecycle A ServiceTemplate is checked against its associatedspan. ServiceDefinition by verifying the presence of the ServiceSpecCharacteristics and the validity of the corresponding assigned ServiceSpecCharacteristicsValues. Each of the associated Service instances will have the same invariant characteristics which values are taken from the ServiceTemplate. However, when activating a Service, it may be possible to specify over the Activation Interface a ServiceCharacteristicsValue which overrides the corresponding ServiceSpecCharacteristicValue available in the associated ServiceTemplate. In this case the new proposed value applies only to the Service instance created, and the ServiceSpecCharacteristicValue in the ServiceTemplate is not modified. In order not to descend into sub-classing, the ServiceTemplate is considered to be generic such that it serves as a framework for defining technology or service specific templates. Other TMForum groups, or service providers, may use the service template as a foundation for building or populating servicetemplates.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

F-7

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

F Glossary

Subnetwork Connection

A Subnetwork Connection (SNC) represents the relationship between two of the following types on end points: l Physical Termination Point (PTP) l Connection Termination Point (CTP) l Group Termination Point (GTP) l Floating Termination Point (FTP) An SNC represents a transparent end-to-end connection or a trail (closed or half-open) through or within a MultiLayer Subnetwork according to the roles associated to its end points. If the SNC represents a connection, its end points are CTPs or FTPs with the SNC's layer rate as connectable layer rate. In the case of GTPs (i.e. a Bundled connection) the SNC does not have an explicit layer rate. If the SNC represents a trail, its end points are CTPs, FTPs or PTPs. An SNC shall be contained in a MultiLayer Subnetwork. A Subscriber is an entity (associated with one or more users) that is engaged in a service subscription with a service provider. The subscriber is allowed to subscribe and unsubscribe services, to register a user or a list of users authorized to use these services, and also to set the limits relative to the use that associated users make of these services.

Subscriber

T Termination Point

A Termination Point (TP) represents a logical abstraction of anendpoint (actual or potential) of either: 1. A Topological Link or 2. a Subnetwork Connection (SNC) or 3. a Flow Domain Fragment (FDFr) or 4. a Cross Connection (CC).

Topological Link

F-8

A Topological Link (TL) is a physical link between two Physical Termination Point (PTP)s or a trail between two Termination Point (TP)s (e.g., an ATM link between two ATM NI CTPs), which are called aEnd TP and zEnd TP of the TL.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

TMD Transmission Descriptor

Issue 05 (2010-11-19)

F Glossary

A Transmission Descriptor (TMD) represents a collection of attributes, which are used to define multi-layered transmissionparameters, and additional information parameters on a Termination Point (TP).

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

F-9

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

G

G Acronyms and Abbreviations

Acronyms and Abbreviations

A ABR

Asynchronous Batch Response

AFB

Asynchronous File Bulk

AID

Alarm Identifier

ARR

Asynchronous Request/Reply

ASN.1

Abstract Syntax Notation One

AVC

AttributeValueChange

C CDE

Common Desktop Environment

CPU

Central Processing Unit

E EdgeTP

EdgeTerminationPoint

EH

EquipmenHolder

EQT

Equipment

EMS

Element Management System

F

Issue 05 (2010-11-19)

FIFO

First In First Out

FTP

File Transfer Protocol

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

G-1

G Acronyms and Abbreviations

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

G GE

Gigabit Ethernet

GNE

Gate Network Element

GUI

GraphicalUserInterface

H HA

High-Availability

HTTP

Hyper-Text Transmission Protocol

HTTPS

Hypertext Transfer Protocol Secure

I ID

Identity

IMAP

Integrated Management Application Platform

IP

Internet Protocol

ITU-T

International Telecommunication UnionTelecommunication Standardization Sector

J JMS

Java Message Service

L LAN

Local Area Network

M

G-2

MAC

Media Access Control

MD

ManagementDomain

MDP

Message Dispatch Process

ME

ManagedElement

MEP

Message Exchage Pattern

MLSN

MultiLayerSubNetwork

MO

Managed Object

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

G Acronyms and Abbreviations

MTOSI

Multi-Technology Operations System Interface

MTNM

Multi-Technology Network Management

N NE

NetworkElement

NEL

Network Element Level

NML

Network Management Level

NMS

Network Management System

O OS

OperationsSystem

ONE

OpticalNetworkElement

OTN

Optical Transport Network

OSGI

Open Services Gateway Initiative

OSS

Operation Support System

OSN

Optical Switch Net

OSI

Open Systems Interconnection

P PC

Personal Computer

PDH

Plesiochronous Digital Hierarchy

PTP

PhysicalTerminationPoint

S

Issue 05 (2010-11-19)

SAP

Service Access Point

SC

StateChange

SDH

Synchronous Digital Hierarchy

SFB

Synchronous (File) Bulk

SIT

Synchronous Iterator Pattern

SNC

SubNetworkConnection

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

G-3

G Acronyms and Abbreviations

iManager U2000 Unified Network Management System Northbound XML Interface User Guide

SOAP

Simple Object Access Protocol

SONET

Synchronous Optical Network

SRR

Synchronous Request Response

SSL

Security Socket Layer

SSM

Synchronization Status Message

SFTP

SSH FTP

SML

Service Management Layer

SOA

Service-Oriented Architecture

T TCP

Transport Control Protocol

TL

TopologicalLink

TMD

TransmissionDescriptor

TMF

Telecommunication Management Forum

TMN

Telecommunication Management Network

TP

TerminationPoint

TCA

Threshold Crossed Alert

U UPC

Usage Parameter Control

UTC

Coordinated Universal Time

W WAN

Wide Area Network

WSDL

Web Service Definition Language

WSN

Web Services Notification

X XML

G-4

eXtensible Markup Language

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Issue 05 (2010-11-19)

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF