IEEE Standards List

IEEE Standards list 001. ANSI C37.42-1996 American National Standard Specification for High-Voltage Expulsion Type Distribution Class Fuses%2C Cutouts%2C Fuse Disconnecting Switches and Fuse Links.pdf  002. ANSI_IEEE C67.92-1987 --- IEEE Guide For The Application Of Neutral Grounding In Electrical Utility Systems Part I-introduction.pdf  003. ANSI_IEEE Std 432-1976 --- IEEE guide for insulation maintenance for rotating electrical machinery (5 hp to less than 10 000 hp).pdf  004. ANSI_IEEE Std 665-1995 --- IEEE guide for generating station grounding.pdf  005. ANSI-IEEE Std 125-1988 --- IEEE recommended practice for preparation of  equipment specifications for speed-governing of hydraulic turbines intended to drive electric generators.pdf  006. ANSI--IEEE Std 576-1989 IEEE recommended practice for installation, termination, and testing of insulated power cable as used in the petroleum and chemical industry.pdf  007. ANSI--IEEE Std C37.97-1979 --- IEEE Guide for Protective Relay Applications to Power System Buses.pdf  008. ANSI--IEEE Std C57.12.56-1986 --- IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers.pdf  009. IEEE Std 1010-2006 --- IEEE Guide for Control of Hydroelectric Power Plants.pdf  010. IEEE Std 1050-1996 --- IEEE Guide for Instrumentation and Control Grounding in Generating Stations.pdf  011. IEEE Std 1100 - 2005 2 005 --- IEEE Recommended Practice for Powering and Grounding Electronic Equipment.pdf  012. IEEE Std 1100-1992 --- IEEE recommended practice for powering and grounding sensitive electronic equipment.pdf  013. IEEE Std 1120 - 2004 2 004 --- IEEE Guide for the Planning, Design, Installation, and Repair of Submarine Power Cable Systems.pdf  014. IEEE Std 1125-1993 --- IEEE guide g uide for moisture measurement and control in SF6 Gas-Insulated Equipment.pdf  015. IEEE Std 1138-1994 --- IEEE Standard Construction of Composite Fiber Optic Overhead Ground Wire - OPGW - for Use on Electric Utility Power Lines.pdf  016. IEEE Std 1142-1995 --- IEEE Guide for the Design, Testing, and Application of  Moisture-Impervious, Solid Dielectric, 5-35 kV Power Cable Using Metal-Plastic Laminates.pdf  017. IEEE Std 1143-1994 IEEE guide on shielding practice for low voltage cables.pdf  018. IEEE Std 1159.3-2003 --- IEEE Recommended Practice for the Transfer of Power  Quality Data.pdf  019. IEEE Std 1159-1995 --- IEEE Recommended Practice for Monitoring Electric Power Quality.pdf  020. IEEE Std 1184-2006 --- IEEE Guide for Batteries for Uninterruptible Power Supply Systems.pdf 

021. IEEE Std 1247™-2005 (Revision of IEEE Std 1247-1998) --- IEEE Standard for  Interrupter Switches for Alternating Current, Rated Above 1000 Volts.pdf  022. IEEE Std 1248-1998 --- IEEE guide for the commissioning of electrical systems inhydroelectric power plants.pdf  023. IEEE Std 1248-1998 IEEE guide for the commissioning of electrical systems in hydroelectric power plants.pdf  024. IEEE Std 1283-2004 --- IEEE Guide for Determining the Effects of HighTemperature Operation on Conductors%2C Connectors%2C and Accessories.pdf  025. IEEE Std 1300-1996 IEEE guide for cable connections for gas-insulated substations.pdf  026. IEEE Std 1349-2001--- IEEE Guide for the Application of Electric Motors in Class I, Division 2 Hazardous (Classified) Locations.pdf  027. IEEE Std 1366- 2001 --- IEEE guide for electric power distribution reliability indices.pdf  028. IEEE Std 1366-2003 (Revision of IEEE Std 1366-1998) --- IEEE Guide for Electric Power Distribution Reliability Indices.pdf  029. IEEE Std 1410-2004 (Revision of IEEE Std 1410-1997) --- IEEE guide for  improving the lightning performance of electric power overhead distribution lines.pdf  030. IEEE Std 142-2007 (Revision of IEEE Std 142-1991) --- IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems.pdf  031. IEEE Std 1513-2001--- IEEE Recommended Practice for Qualification of  Concentrator.pdf  032. IEEE Std 18-2002 (Revision of IEEE Std 18-1992) --- IEEE Standard for Shunt Power Capacitors.pdf  033. IEEE Std 260.1-2004 (Revision of IEEE Std 260.1-1993) --- IEEE Standard Letter  Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units).pdf  034. IEEE Std 519-1992 --- IEEE recommended practices and requirements for harmonic control in electrical power systems.pdf  035. IEEE Std 80-2000 - IEEE guide for safety in AC substation grounding.pdf  036. IEEE Std 929-2000 --- IEEE recommended practice for utility interface of   photovoltaic (PV) systems.pdf  037. IEEE Std 937-2000 --- IEEE recommended practice for installation and maintenance of lead-acid batteries for photovoltaic.pdf  038. IEEE Std 937-2007 --- IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic %28PV%29 Systems.pdf  039. IEEE Std 943-1986 (1992) --- IEEE Guide for Aging Mechanisms and Diagnostic Procedures in Evaluating Electrical Insulation Systems.pdf  040. IEEE Std 946-1992 --- IEEE recommended practice for the design of DC auxiliary  power systems for generating stations.pdf  041. IEEE Std 946-2005 --- IEEE recommended practice for the design of DC auxiliary  power systems for generating stations.pdf  042. IEEE Std 958-2003 --- IEEE Guide for the Application of AC Adjustable-Speed Drives on 2400 to 13 800 V Auxiliary Systems in Electric Power Generating Stations.pdf 

043. IEEE Std C37.011-1994 --- IEEE Application Guide for Transient Recovery Voltage for AC High- Voltage Circuit Breakers Rated on a Symmetrical Current Basis.pdf  044. IEEE Std C37.013-1997 --- IEEE Standard for AC High-Voltage Generator Circuit Breaker Rated on a Symmetrical Current Basis..pdf  045. IEEE Std C37.113-1999 --- IEEE guide for protective relay applications to transmission lines.pdf  046. IEEE Std C37.1-1994 (Revision of IEEE Std C37.1-1987) --- IEEE Standard Definition, Specification, and Analysis of Systems .. Automatic Control.pdf  047. IEEE Std C37.13-1990 (1995) --- IEEE Standard for Low-Voltage AC Power  Circuit Breakers Used in Enclosures.pdf  048. IEEE Std C37.14-1992 --- IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures.pdf  049. IEEE Std C37.20.1-1993 (Revision of IEEE Std C37.20.1-1987) --- IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear.pdf  050. IEEE Std C37.20.2-1993 --- IEEE Standard for Metal-Clad and Station-Type Cubicle Switchgear.pdf  051. IEEE Std C37.2-1991 --- IEEE standard electrical power system device function numbers.pdf  052. IEEE Std C37.21™-2005 --- IEEE Standard for Control Switchboards.pdf  053. IEEE Std C37.90™-2005 (Revision of IEEE Std C37.90-1989) --- IEEE Standard for Relays and Relay system Associated with electric Power Apparatus.pdf  054. IEEE Std C37.96-2000 --- IEEE Guide for AC Motor Protection.pdf  055. IEEE Std C37.96-2000-IEEE guide for AC motor protection.pdf  056. IEEE Std C37.99-2000 (Revision of IEEE Std C37.99-1990) --- IEEE guide for the  protection of shunt capacitor banks.pdf  057. IEEE Std C37-91-2000 --- IEEE guide for protective relay applications to power  transformers.pdf  058. IEEE Std C57.106-1991 --- IEEE guide for acceptance and maintenance of  insulating oil in equipment.pdf  059. IEEE Std C57.12.00-1993 IEEE Standard General Requirements for LiquidImmersed Distribution.pdf  060. IEEE Std C57.12.01-1989 --- IEEE standard general requirements for dry-type distribution and power transformers including those.pdf  061. IEEE Std C57.12.90-1993 --- Liquid-Immersed Distribution, Power, and Regulating Transformers and Guide for Short-Circuit Testing.pdf  062. IEEE Std C57.12.91-1995 --- IEEE Test Code for Dry-Type Distribution and Power  Transformers.pdf  063. IEEE Std C57.92-1981 (Reaff 1991) --- IEEE Guide for Loading Mineral-OilImmersed Power Transformers up to and Including 100 MVA with 55 C or 65 C Average Winding Rise.pdf  064. IEEE Std C57.94-1982 --- IEEE recommended practice for installation, application, operation and maintenance of dry-type general purpose distribution and power  transformers.pdf  065. IEEE Std C57.98-1993 --- IEEE Guide for Transformer Impulse Tests..pdf 

066. IEEE Std C62.11™-2005 (Revision of IEEE Std C62.11-1999) --- IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits %28over 1 kV%29.pdf  067. IEEE Std C62.64 TM -1997 --- IEEE Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications and Signaling.pdf  068. IEEE Std C62.92.1-2000 --- IEEE guide for the application of neutral grounding in electrical utility systems - Part I --- introduction.pdf  069. IEEE Std C62.92.3-1993 --- IEEE guide for the neutral grounding in electrical utility systems ( Part III-Generator Auxiliary Sys).pdf  070. IEEE Std C62.92.4-1991 --- IEEE guide for the application of neutral grounding in electrical utility systems ( part IV - distribution).pdf  071. IEEE Std C62.92.5-1992 --- IEEE guide for the application of neutral grounding in electrical utility systems ( part V - transmission systems and subtransmission systems).pdf  072. IEEE Std C62.92-1989 --- IEEE guide for the application of neutral grounding in electrical utility systems. Part II - grounding of synchronous generator systems.pdf