Hydrocarbon Compounds - By Razi
Short Description
Download Hydrocarbon Compounds - By Razi...
Description
(C4H10)
(C4H10)
Hydrocarbons
OBJECTIVES:
Describe the relationship between number of valence electrons and bonding in carbon.
Hydrocarbons
OBJECTIVES:
Define and describe alkanes.
Hydrocarbons
OBJECTIVES:
Relate the polarity of hydrocarbons to their solubility.
Organic Chemistry and Hydrocarbons “Organic” originally referred to any chemicals that came from organisms 1828 - German chemist Friedrich Wohler synthesized urea in a lab Today, organic chemistry is the chemistry of virtually all compounds containing the element carbon
Friedrich Wohler 1800 – 1882 Used
inorganic substances to synthesize urea, a carbon compound found in urine. This
re-defined organic chemistry.
Organic Chemistry and Hydrocarbons Over a million organic compounds, with a dazzling array of properties Why so many? Carbon’s unique bonding ability! Let’s start with the simplest of the organic compounds. These are the Hydrocarbons
Organic Chemistry and Hydrocarbons
Hydrocarbons contain only two elements: 1) hydrogen, and 2) carbon
simplest hydrocarbons called “alkanes”, which contain only carbon to carbon single covalent bonds (CnH2n+2)
methane (CH4) with one carbon is the simplest alkane. It is the major component of natural gas
Organic Chemistry and Hydrocarbons
Review structural formulas - p.694 Carbon has 4 valence electrons, thus forms 4 covalent bonds
not only with other elements, but also forms bonds WITH ITSELF (nonpolar)
Ethane (C2H6) is the simplest alkane with a carbon to carbon bond
Straight-Chain Alkanes Straight-chain alkanes contain any number of carbon atoms, one after the other , in a chain pattern meaning one linked to the next (not always straight ) C-C-C C-C-C-C etc. Names of alkanes always will always end with -ane
Straight-Chain Alkanes
Combined with the -ane ending is a prefix for the number of carbons
Table 22.1, page 695
Homologous series- a group of compounds that have a constant increment of change In alkanes, it is: -CH2- (methylene)
Straight-Chain Alkanes
Many alkanes used for fuels: methane, propane, butane, octane As the number of carbons increases, so does the boiling and melting pt.
The first 4 are gases; #5-15 are liquids; higher alkanes are solids
Condensed structural formulas? Note examples on page 696
Naming Straight-Chain Alkanes
Names recommended by IUPAC - the International Union of Pure and A pplied Chemistry
end with – ane; the root part of the name indicates the # of carbons
We sometimes still rely on common names, some of which are well-known
Naming Straight-Chain Alkanes IUPAC names may be long and cumbersome Common names may be easier or more familiar, but usually do not describe the chemical structure! Methane is natural gas or swamp gas
Branched-Chain Alkanes
Branched-chain means that other elements besides hydrogen may be attached to the carbon halogens, oxygen, nitrogen, sulfur, and even other carbons any atom that takes the place of a hydrogen on a parent hydrocarbon is called a substituent , or the branched part
Branched-Chain Alkanes
A hydrocarbon substituent is called an alkyl group or sometimes radicals use the same prefixes to indicate the number of carbons, but -ane ending is now -yl such as: methyl, ethyl, propyl, etc. Gives much more variety to the organic compounds
Branched-Chain Alkanes
Rules for naming – go from right to left - page 698
1. Longest C-C chain is parent 2. Number so branches have lowest # 3. Give position number to branch 4. Prefix (di, tri) more than one branch 5. Alphabetize branches (not prefix) 6. Use proper punctuation ( - and , )
- Page 699
Branched-Chain Alkanes
From the name, draw the structure, in a right-to-left manner:
1. Find the parent, with the -ane 2. Number carbons on parent 3. Identify substituent groups (give lowest number); attach 4. Add remaining hydrogens
- Page 700
Alkanes
Draw 3-ethylpentane
Draw 2,3,4-trimethylhexane
Since the electrons are shared equally, the molecule is nonpolar
thus, not attracted to water
oil (a hydrocarbon) not soluble in H2O
“like dissolves like”
Section 22.2 Unsaturated Hydrocarbons
OBJECTIVES:
Describe the difference between unsaturated and saturated hydrocarbons.
Section 22.2 Unsaturated Hydrocarbons
OBJECTIVES:
Distinguish the structures of alkenes and alkynes.
Alkenes Multiple bonds can also exist between the carbon atoms Hydrocarbons containing carbon to carbon double bonds are called alkenes (CnH2n) C=C CC=C Called “unsaturated” if they contain double or triple bonds
Naming Alkenes
Find longest parent that has the double bond in it New ending: -ene Number the chain, so that the double bond gets the lower number Name and number the substituents Samples on page 702
Alkynes Hydrocarbons containing carbon to carbon triple bonds are called alkynes ethyne (CnH2n-2) -C C Alkynes are not plentiful in nature Simplest is ethyne- common name acetylene (fuel for torches) Table 22.3, p. 703 for boiling pt.
Section 22.3 Isomers
OBJECTIVES:
Explain why structural isomers have different properties.
Section 22.3 Isomers
OBJECTIVES:
Describe the conditions under which geometric isomers are possible.
Section 22.3 Isomers
OBJECTIVES:
Identify optical isomers.
Structural Isomers Compounds that have the same molecular formula, but different molecular structures, are called structural isomers Butane and 2-methylpropane (made by breaking carbon off the end, and making it a branch in the middle) Also have different properties, such as b.p., m.p., and reactivity
Structural Isomers of Butane, C4H10
Stereoisomers
Don’t forget that these structures are really 3-dimensional stereoisomers- molecules of the same molecular structure that differ only in the arrangement of the atoms in space. Two types are a) geometric and b) optical
Geometric Isomers
There is a lack of rotation around a carbon to carbon multiple bond
has an important structural implication
Two possible arrangements: 1. trans configuration - substituted groups on opposite sides of double bond 2. cis configuration - same side
Geometric Isomers
Trans-2-butene
Substituted groups are on the same side of the double bond (in this case, both are above)
Substituted groups are on opposite sides of the double bond (in this case, one is above, the other is below)
Cis-2-butene
Geometric Isomers
Trans-2-butene and Cis-2-butene shown on page 705 differ in the geometry of the substituted groups (to double bond) like other structural isomers, have different physical and chemical properties ( note page 705-middle)
Optical Isomers
Asymmetric carbon? C with 4 different groups attached. Conceptual Problem 22.4, p.706
Molecules containing asymmetric carbons have “handedness”, and exist as stereoisomers.
Figure 22.9, page 705
Optical Isomers, and these will each show an asymetric carbon (4 different branches attached) The asymetric carbon
Section 22.4 Hydrocarbon Rings
OBJECTIVES:
Identify cyclic ring structures.
Section 22.4 Hydrocarbon Rings
OBJECTIVES:
Describe bonding in benzene.
Cyclic Hydrocarbons
The two ends of the carbon chain are attached in a ring in a cyclic hydrocarbon
sample drawings on page 709
named as “cyclo- ____”
hydrocarbon compounds that do NOT contain rings are known as aliphatic compounds
Aromatic Hydrocarbons
A special group of unsaturated cyclic hydrocarbons is known as arenes
contain single rings, or groups of rings also called “aromatic hydrocarbons”, because of pleasant odor simplest aromatic is benzene (C6H6) Term “aromatic” applies to materials with bonding like that of benzene
Aromatic Hydrocarbons
Benzene is a six-carbon ring, with alternating double and single bonds
exhibits resonance, due to location of the double and single bonds-p.710
Benzene derivatives possible:
methylbenzene, 3-phenylhexane, ethylbenzene (top page 711)
Aromatic Hydrocarbons
One derivative of Benzene is called phenylethene, or commonly named STYRENE. Foamed styrene is trademarked by Dow Chemical as “styrofoam” CH2
Other manufacturers items usually just called “foam cups”
CH
Aromatic Hydrocarbons
Benzene derivatives can have two or C more substitutents:
1,2-dimethylbenzene
1,3-dimethylbenzene
1,4-dimethylbenzene
C
C
C
Can use ortho for 1,2; meta for 1,3; and para for 1,4 (page 711)
Section 22.5 Hydrocarbons From Earth’s Crust
OBJECTIVES:
Identify three important fossil fuels and describe their origins.
Section 22.5 Hydrocarbons From Earth’s Crust
OBJECTIVES:
Describe the composition of natural gas, petroleum, and coal.
Section 22.5 Hydrocarbons From Earth’s Crust
OBJECTIVES:
Describe what happens when petroleum is refined.
Natural Gas
Fossil fuels provide much of the world’s energy Natural gas and petroleum contain mostly the aliphatic (or straight-chain) hydrocarbons – formed from marine life buried in sediment of the oceans Natural gas is an important source of alkanes of low molecular mass
Natural Gas
Natural gas is typically:
80% methane, 10% ethane, 4% propane, and 2% butane with the remainder being nitrogen and higher molar mass hydrocarbons
also contains a small amount of He, and is one of it’s major sources
Natural Gas
Natural gas is prized for combustion, because with adequate oxygen, it burns with a hot, clean blue flame:
CH4 + 2O2 CO2 + 2H2O + heat
Incomplete burning has a yellow flame, due to glowing carbon parts, as well as making carbon monoxide
Petroleum
The compounds found in petroleum (or crude oil) are more complex than those in natural gas Usually straight-chain and branchedchain alkanes, with some aromatic compounds also Crude oil must be refined (separated) before being used
Petroleum
It is separated by distillation into fractions, according to boiling pt. Fractions containing higher molar mass can be “cracked” into more useful shorter chain components, such as gasoline and kerosene
involves catalyst and heat
starts materials for plastics and paints
Coal
From huge fern trees and mosses decaying millions of years ago under great pressure of rocks / soil. Stages in coal formation:
1. Peat- soft, fibrous material much like decayed garden refuse; high water content. After drying will make a lowcost, smoky fuel
Coal 2. Lignite- peat left in the ground longer, loses it’s fibrous texture, and is also called brown coal
harder than peat; higher C content (50%); still has high water content
3. Bituminous, or soft coal- formed after more time; lower water content, higher C content (70-80%)
Coal 4. Anthracite, or hard coal
carbon content exceeding 80%, making it an excellent fuel source
Coal may be found close to the surface (strip-mined), or deep within the earth Pollutants from coal are common; soot and sulfur problems
BIG BRUTUS Dragline used to remove the overburden of a strip mining coal field near West Mineral, Kansas. Note the size of the man standing next to it.
Coal
Coal may be distilled for many products
coal gas, coal tar, coke, and ammonia further distilled into benzene, toluene, naphthalene, phenol- the aromatics Coke is almost pure carbon; produces intense heat and little or no smoke, thus used in industrial processes
View more...
Comments