Hydril cs

February 8, 2017 | Author: Ricardo Calderón Herreño | Category: N/A
Share Embed Donate


Short Description

Download Hydril cs...

Description

Premium Connections Catalogue

2

Table of contents 4

36

Introduction

Connections by Technology

TenarisHydril Research & Development Design & Technology Quality & Manufacturing Steel Grades Tubular Services Website

Blue™ Series

13

Application Guide Connections Nomenclature 17

Dimensional Range 27 Casing & tubing Connections

Casing Connections

Threaded & Coupled Integral Semi Flush Integral Flush

Blue™ Blue™ Thermal Liner (*) Blue™ Near Flush Wedge Series 500™

Wedge 563™ Wedge 523™ Wedge 521™ Wedge 513™ Wedge 511™ Wedge 533™ Wedge 503™ Wedge 553™ Legacy Series

3SB™ MS™ HW™ ER™ PJD™ SLX™ MACII™ PH4™ / PH6™ / CS®

Tubing Connections

Threaded & Coupled Integral Upset

(*) TenarisHydril Blue™ Thermal Liner was formerly known as TenarisHydril Blue™ SAGD. They are completely interchangeable. For information on other connections, visit www.tenaris.com/tenarishydril

TenarisHydril

TenarisHydril offers outstanding premium connection design and technology worldwide. With a comprehensive range of high performance products backed by an extensive global field service network and licensed threading shops, we develop solutions to meet the needs of ever more demanding E&P environments.

TenarisHydril premium connections are supplied and supported by Tenaris, the leading manufacturer and supplier of steel tubes and integrated tubular services to the world's energy industry. For further information please visit our website at www.tenaris.com/tenarishydril

Tenaris Licensees

4

Research & Development Tenaris follows a continuous process of designing, testing, and improving TenarisHydril technology to meet the needs of each customer.

The exhaustive finite-element analysis is necessarily complemented with full-scale performance testing, a critical step to fully verify some critical performance features such as galling resistance and sealability performance. These experiments include make-and-break testing to guarantee makeup, and extensive functional tests to verify sealability response. This test validates the reliability of our connections’ structural design and performance, based upon testing that simulates the specific conditions in the oil field where it will be run. The Tenaris R&D network provides support for premium connection development through specific areas and also through the generation

Finite element analysis and full-scale testing at Tenaris’s R&D centers.

INTRODUCTION

Finite element analysis is a key design element that helps not only in producing strength visualization and indicating the distribution of stresses and strains on our products but also provides a detailed mapping of sealing performance under the most varied and extreme operating and geometrical conditions. This allows the premium connection design to be generated, refined and optimized even before it is manufactured. Through our R&D activities, we have the capacity to verify our premium connections performance according to each customer’s specifications or to qualify connections for a new environment where different operational loading conditions will be observed.

All of our technology is not only tested in our laboratories but also in the field. Experience in the field guarantees the performance of TenarisHydril premium connections and simultaneously acts as the origin for future R&D initiatives to improve our technologies.

PREMIUM CONNECTIONS CATALOGUE

Our R&D centers present enhanced capacity in full-scale testing, conditioned to test and qualify premium connections in accordance with the most demanding procedures including the newest version of the ISO 13679 standard. Our state-of-the-art finite element analysis capabilities are used to design and analyze premium connections. We carry out full-scale testing in Argentina, Mexico, Italy and Japan while basic and new design take place mainly at our center in Campana, Argentina.

of basic knowledge and solutions originated in departments as Surfaces and Coatings, Structural Integrity, Metallurgy, Non Destructive Testing, and others that impact not only on the connection design but also on its manufacturing process, control and gauging technology, surface treatment, and quality. This integrated approach helps to ensure Tenaris maintains its leading position in terms of product and process innovation in premium connections.

TenarisHydril

With research laboratories and specialized premium connection testing facilities in Argentina, Italy, Japan and Mexico, Tenaris has a research staff of more than 200 scientists and engineers and the resources required to support the needs of our customers in designing, testing and qualifying our premium connections.

5

Design & Technology TenarisHydril offers proven products designed for the most challenging operations.

Blue™ SERIES Our Blue™ Series incorporates the most advanced

premium connection technology available. Designed for the most complex and environmentally sensitive wells and for testing under ISO 13679 CAL IV, these connections are the perfect choice for HP/HT drilling operations all around the world. Including coupled and integral configurations plus our Dopeless® option, Blue™ Series connections reduce drilling risk by providing performance you can rely on when you most need it.

Our Dopeless® technology is a dry, multi-layer coating which is applied through a controlled industrial process. Originally developed in response to stringent environmental requirements for offshore operations in Norway, Dopeless® technology has the potential to transform drilling and completion operations in the most complex and sensitive environments. It is also an ideal choice for operations that lack infrastructure, where ease of handling, preparation and installation reduces risk and costs. Wedge Series 500™

Dopeless®

Dope-free products can provide substantial operational and HSE benefits in complex conditions. Our Dopeless® connections remain corrosion-free, even after four years beside the sea.

Specifically designed for use where torque strength is critical, our Wedge Series 500™ connections provide superior compression and bending resistance and also several times the torque strength of most competing technologies. They are used in demanding applications from highly deviated wells to strings that must be rotated and pushed into place. Wedge Series 500™ connections reliably perform even on pipes with thin walls. They are perfect for tight clearance applications like lean profile, which generates cost savings for our customers, due to their slim profile and compression, torque and bending capacity. Wedge Series 500™ connections are available in flush, near flush, upset and threaded and coupled configurations, with or without metal-to-metal seals.

Easy operational handling with exceptional performance.

Legacy Series

TenarisHydril products have been at the forefront of premium connection design and technology for the past 60 years. Our Legacy Series includes tried and proven performers which have provided many years of reliable service in challenging drilling environments around the world.

Wedge Series 500™, Thread Identification Code First digit

second digit

THIRD digit

Series 500

Configuration and pipe ends

Sealing system

5- Wedge thread

0- Integral connection on external upset pipe 1- Integral connection on non-upset pipe with pipe body OD box

1- Wedge thread and lubricant seal

2- Integral connection on non-upset pipe with swaged OD box 3- Integral connection on internal/external upset pipe 5- Integral connection on non-upset pin end and upset box end pipe 6- Coupled connection on non-upset pipe

6

3- Metal seal plus wedge thread and lubricant seal

Quality & Manufacturing TenarisHydril connections are manufactured in Tenaris’s global network of production facilities with its consistent quality management system.

Global Manufacturing

By manufacturing premium connections as part of an integrated process of pipe design, production, treatment and finishing, we ensure our products’ quality. We can also respond promptly and flexibly to changes in required specifications and other unexpected conditions while maintaining the highest quality standards expected by the industry. We thread our connections as close as possible to our customers’ operations, using both our manufacturing centers and finishing facilities

worldwide. Our global reach grants us greater flexibility to adapt to our customers’ needs. global support

Tenaris has a wide international network of licensed threading shops to reach every area where our TenarisHydril products are used. These facilities, which are qualified and regularly audited by Tenaris technicians, provide accessories, and carry out repairs of damaged products. For further information about the licensed threading shops, their qualifications and capacity, please visit our website: www.tenaris.com/tenarishydril.

OCTG Dimensional Range 2.063

2 3/8

nominal weights (lb/ft)

From

1.70

2.30

2.75

3.24

4.00

6.40

6.50

8.20

To

2.19

3.24

4.19

4.50

7.70

11.65

17.05

22.50

8 5/8

9 5/8

9 7/8

10 3/4

11 3/4

11 7/8

12 3/4

13 3/8

13 1/2

From

24.00

32.30

62.80

32.75

42.00

58.80

57.60

48.00

80.40

88.20

82.50

65.00

To

90.00

91.00

72.10

108.70

119.90

71.80

137.90

145.60

81.40

105.00

120.00

147.30

2 7/8

3 1/2

4

4 1/2

5

5 1/2

6 5/8

7

7 5/8

7 3/4

9.50

11.50

14.00

20.00

17.00

24.00

46.10

26.50

34.00

43.10

65.80

63.90

70.70

56.10

13 5/8

14

16

18 5/8

20

24 1/2

87.50

94.00

133.00

139.00

169.00

207.00

Rolling and threading at our mills guarantees full control of our high quality products. INTRODUCTION

1.900

PREMIUM CONNECTIONS CATALOGUE

1.660

TenarisHydril

1.315

OD (IN.)

7

Steel Grades Our proprietary range of steel grades is designed for the most demanding well conditions.

Tenaris has developed a broad range of proprietary steel grades to meet the most demanding well conditions, from severe sour environments to high external pressure conditions and deep wells.

Deep Well Service

Severe Sour Service

Critical Service

Designed for a range of sour environments up to the most severe, with higher resistance to sulfide stress corrosion cracking.

Designed for specific mild CO2 environments, giving a cost effective alternative as optional carbon steel for sweet corrosion, where CRA is not economically justified.

Designed for deep wells, where added strength with good ductility and fracture toughness is required.

High Collapse Service

Designed for wells where high external pressures are anticipated, through the optimization of tubular collapse performance.

Low Temperature Service

Proprietary grades with improved fracture toughness designed to be used in low temperatures, such as Arctic regions.

High Collapse & Sour Service

Designed for oil and gas wells, where high external pressures in sour environments are anticipated.

High DUCTILITY

Designed for expandable applications. Thermal Service

Designed for the production of high density oil under severe thermal service wells.

Producing proprietary steel grades to meet high demanding requirements.

8

API Grades Manufactured by Tenaris SMYS (Ksi)

40

55

group 1

H40

J55, K55

65

80

M65

L80.1, L80 13Cr

95

C90.1

T95.1

N80.1, N80.Q

group 2

110

90

125

R95 C110 P110

group 3

Q125

group 4

Proprietary Steel Grades by Tenaris 45

SMYS (Ksi)

55

60

70

75

80

90

95

100

110

125

sour service

TN 80 S

TN 90 S

TN 95 S

severe sour service

TN 80 SS

TN 90 SS

TN 95 SS

high collapse service

TN 80 HC

TN 95 HC

high collapse & sour service

TN 80 HS

TN 95 HS

TN 80 Cr3

TN 95 Cr3

TN 110 Cr3

TN 80 LT

TN 95 LT

TN 110 LT

TN 100 SS

TN 110 SS

TN 125 SS

TN 110 HC

TN 125 HC

140

150

TN 140 HC

TN 110 HS

TN 100 HS

deep well service

TN 135 DW TN 140 DW TN 150 DW

critical service

TN 55 CS

low temperature service high DUCTILITY

135

TN 70 CS

TN 75 CS

TN 55 LT TN 45 HD

thermal service

TN 60 HD

TN 125 LT

TN 70 HD TN 80 TH

TN 55 TH

Seamless Martensitic Stainless Steels for CO2 Corrosion SMYS (Ksi) martensitic

80

85

95

TN 80 Cr13

TN 85 Cr13

110

TN 95 Cr13

modified martensitic super martensitic

TN 95 Cr13M

TN 110 Cr13M

TN 95 Cr13S

TN 110 Cr13S

sandvik saf 2507

sandvik sanicro 28 sandvik sanicro 29

Yield Strength Ksi

2; 22-5-3 2; 27-5-4

3; 27-31-4 3; 27-31-4

Tensile Strength Ksi

Min. Elongation

Max Hardeness HRC

65-90

90

25

26

140-160

145

9

38

80-105

110

20

28

125-150

130

10

37

140-160

145

9

38

110-140

115

11

35

125-150

130

10

37

110-140

115

11

35

125-150

130

10

37

Tenaris and Sandvik established an alliance to identify and develop new tubular products for the oil and gas industry. Tenaris became the worldwide distributor for Sandvik’s seamless, stainless steel down hole production tubing and other high performance products.

PREMIUM CONNECTIONS CATALOGUE

sandvik saf 2205

ISO 13680 Group and Category

TenarisHydril

Grade

INTRODUCTION

Corrosion Resistant Alloys

9

Tubular Services Tenaris works closely with its customers to offer comprehensive solutions to manage their tubular requirements worldwide.

In addition to the field services and repair shops network, Tenaris has expanded its support for its customers offering comprehensive services that add value through customized supply, operational, administrative and technical solutions for E&P operations. We cover all stages in well operations, from string design to remnant management. Our services are designed to fit each customer’s tubular requirements. Our tubular services package consists of the following elements. Our global Technical Sales team helps customers identify the most appropriate solution for their operations. Our logistical expertise and global network reach customers wherever their projects may be and field experts assist with well installations and inspections. The full menu of tubular services comprises: technical services, inventory handling, field services, operation & production consultancy and remnant & post-installation activities.

Our services include product definition and performance evaluation through material handling, using well-established procedures.

10

Whether you are interested in one service or many, you can be assured of our single purpose - to add value to your well operations. The benefits of our services include:

. Cost savings: Appropriate stock levels and supply. . Simplicity: Streamline third parties’ participa-

tion. Get everything from one source, reducing processes and paperwork. One well - One invoice.

. Reliability: At Tenaris, we have the capacity to

handle all details throughout the different operation stages, adapting to unexpected changes in your drilling plans.

. Risk reduction: Receive what you need, whenever you need it. Reduce the probability of incidents while relying on state-of-the-art products.

. Improved operations: Building on its wide

experience with tubular products, Tenaris offers consultancy services to make your field operations more efficient.

. Planning and coordination of the supply . Stock design . Customs clearance . Storage and maintenance . Components programming . Preparation for use . Delivery to well, quay or site . Accessory management Inventory Handling

. Field assessment and analysis . Engineering and procedures assessment . Consulting and project management . Post-installation services Consultancy

. Surplus management . Surplus recovery . Repairs . Contract-closing solutions

Post-installation Services

Specialists at a rig site assist product installation to ensure expected performance.

INTRODUCTION

Technical Services

Field Services

PREMIUM CONNECTIONS CATALOGUE

. Introduction to new products . Materials selection / String design . Analysis and improvement of operations . Training in products and operations . Testing of products and operations . Connections support

. Running assistance . Well installation . Material rental . Waste management

TenarisHydril

Services for all stages of your well operations:

11

Website The TenarisHydril site presents all the information our customers and partners need to know about our premium connections.

Through the TenarisHydril website (www.tenaris. com/tenarishydril), Tenaris provides detailed information on our integrated system of products and services as well as technical assistance. Customers can also access the TenarisHydril website through the Premium Connections link on the Tenaris homepage.

Products and Services

TenarisHydril premium connections for both casing and tubing are classified by technology and by geometry. Users will find information on our products, including their applications and key features and benefits. Casing and Tubing Performance Data

By clicking on the Casing and Tubing Performance Data utility, customers can view performance data for applicable connections by size and steel grade of pipe. Drift values and pipe body mechanical properties, wall thickness, weight, steel grades and connections are available. Results can be printed or e-mailed. Application and Dimesional range

The site also features an Application and Selection Guide that helps users identify which products best suit their needs based on their specific drilling environments, such as thermal or HP/HT and deep wells. Repair Shops and Field Service

A map of Tenaris’s global network of pipe finishing and service facilities, as well as licensed threading and repair shops, helps customers identify which field and technical service specialists are closest to their geographic location.

www.tenaris.com/tenarishydril

12

PREMIUM CONNECTIONS CATALOGUE

INTRODUCTION

Application Guide

Connections Nomenclature

Application Guide Surface Casing threaded & coupled

Intermediate Casing see page

threaded & coupled

see page

threaded & coupled

39

Blue™ (*)

39

Wedge 563™

55

Wedge 563™

55

3SB™

93

3SB™

93

see page

MS™

99

MS™

99

Wedge 523™

63

HW™

103

Wedge 521™

67

Wedge 513™

71

integral

Wedge 511™

75

Blue™ Near Flush (*)

ER™ integral

107

metal seal

integral

see page

see page

Blue™ Near Flush (*)

49

49

Wedge 523™

63

Wedge 523™

63

Wedge 513™

Wedge 521™

67

SLX™

115

MACII™

119

see page

SLX™

115

MACII™

119

metal seal

71

DRILLING WITH CASING

WORKSTRINGS

PRODUCTION TUBING

see page

threaded & coupled

see page

Blue™ (*)

39

Wedge 563™

59

Blue™ (*)

39

Wedge 563™

59

Wedge 553™

87

Blue™ Thermal Liner

45

Wedge 533™

79

PJD™

111

Wedge 563™

Wedge 503™

83

PH4™

123

ER™

Wedge 553™

87

PH6™

123

3SB™

93

CS®

123

MS™

99

PJD™

111

thread seal

PH4™

123

PH6™ CS®

integral

55 107 see page

Wedge 523™

63

see page

Wedge 521™

67

Wedge 561™

(**)

Wedge 513™

71

123

Wedge 531™

(**)

Wedge 511™

75

123

Wedge 501™

(**)

Wedge 551™

(**)

Wedge 511™

75

Wedge 533™

79

Wedge 503™

83

Wedge 553™

87

(*) Dopeless® technology available (**) Connection technology information available at www.tenaris.com/tenarishydril This application guide is only a recommendation. Contact a Tenaris technical specialist before selecting connections. In addition to this guide, most connections can perform in different environments and under load modes not listed here.

14

see page

Blue™ (*)

Wedge 563™

55

Production Casing and Tie-backs

threaded & coupled

Casing/Liners - Metal Seal

see page

see page

Blue™ (*)

39

Blue™ (*)

39

Blue™ (*)

39

Blue™ Near Flush (*)

49

Blue™ Thermal Liner

45

Wedge 563™

55

Wedge 523™

63

Wedge 563™

55

Wedge 521™

67

Wedge 561™

(**)

Wedge 513™

71

Wedge 511™

75

SLX™

Blue™ Thermal Liner integral

see page

ER™

see page

45 107

Wedge 523™

63

Wedge 521™

67

Slotted Pipes, SAGD

see page

Wedge 513™

71

Blue™ Thermal Liner

45

Blue™ (*)

39

Wedge 511™

75

Wedge 521™

67

Blue™ Thermal Liner

45

Wedge 511™

75

Wedge 563™

59

Wedge 523™

63

Production tubing

Wedge 521™

67

Blue™ (*)

39

Wedge 513™

71

Blue™ Thermal Liner

45

Wedge 511™

75

Wedge 511™

75

Wedge 503™

83

ROTATING LINERS

115

Casing/Liners - Thread Seal

INTERNAL COATING

DRILLING WITH TUBING see page

threaded & coupled

see page

HP/HT and DEEP WELLS see page

threaded & coupled

see page

Wedge 563™

59

Blue™ (*)

39

Blue™ (*)

39

Wedge 533™

79

Wedge 563™

59

Wedge 563™

55

Wedge 553™

87

PJD™

111

integral

PH4™

123

Wedge 533™

79

Blue™ Near Flush (*)

49

PH6™

123

Wedge 553™

87

Wedge 523™

63

CS®

123

PH4™

123

Wedge 521™

67

PH6™

123

Wedge 513™

71

CS®

123

Wedge 511™

see page

integral

SLX™ heavy wall

(*) Dopeless® technology available (**) Connection technology information available at www.tenaris.com/tenarishydril

see page

75 115 see page

HW™

103

MACII™

119

APPLICATION GUIDE

see page

THERMAL WELLS

PREMIUM CONNECTIONS CATALOGUE

conventional liners

Horizontal and Extended Reach Wells

TenarisHydril

Liners

15

Connections Nomenclature Acronyms

Acronyms

LEGACY SERIES

BLUE™ SERIES

TenarisHydril Blue™

TSH BLUE

TenarisHydril 3SB™

TSH 3SB

TenarisHydril Blue™ Dopeless®

TSH BLUE-DPLS

TenarisHydril 3SB™ Special Clearance

TSH 3SB-SC

TenarisHydril Blue™ Matched Strength

TSH BLUE-MS

TenarisHydril 3SB™ Special Bevel

TSH 3SB-SB

TenarisHydril Blue™ Special Clearance

TSH BLUE-SC

TenarisHydril MS™

TSH MS

TenarisHydril Blue™ Special Bevel

TSH BLUE-SB

TenarisHydril MS™ Matched Strength

TSH MS-MS

TenarisHydril Blue™ Corrosion Barrier

TSH BLUE-CB

TenarisHydril MS™ Special Clearance

TSH MS-SC

TenarisHydril Blue™ Thermal Liner

TSH BTL

TenarisHydril MS™ Special Bevel

TSH MS-SB

TenarisHydril Blue™ Thermal Liner Special Clearance

TSH BTL-SC

TenarisHydril HW™

TSH HW

TenarisHydril Blue™ Thermal Liner Special Bevel

TSH BTL-SB

TenarisHydril HW™ Special Clearance

TSH HW-SC

TenarisHydril Blue™ Near Flush

TSH BNF

TenarisHydril HW™ Special Bevel

TSH HW-SB

TenarisHydril Blue™ Near Flush Dopeless®

TSH BNF-DPLS

TenarisHydril ER™

TSH ER

TenarisHydril ER™ Matched Strength

TSH ER-MS

TenarisHydril ER™ Special Clearance

TSH ER-SC

WEDGE SERIES 500™

16

technology

TenarisHydril Wedge 563™

TSH W563

TenarisHydril ER™ Special Bevel

TSH ER-SB

TenarisHydril Wedge 563™ Matched Strength

TSH W563-MS

TenarisHydril PJD™

TSH PJD

TenarisHydril Wedge 563™ Corrosion Barrier

TSH W563-CB

TenarisHydril PJD™ Corrosion Barrier

TSH PJD-CB

TenarisHydril Wedge 563™ Recess Free Bore

TSH W563-RFB

TenarisHydril SLX™

TSH SLX

TenarisHydril Wedge 523™

TSH W523

TenarisHydril MACII™

TSH MACII

TenarisHydril Wedge 521™

TSH W521

TenarisHydril PH4™

TSH PH4

TenarisHydril Wedge 513™

TSH W513

TenarisHydril PH4™ Corrosion Barrier

TSH PH4-CB

TenarisHydril Wedge 511™

TSH W511

TenarisHydril PH6™

TSH PH6

TenarisHydril Wedge 533™

TSH W533

TenarisHydril PH6™ Corrosion Barrier

TSH PH6-CB

TenarisHydril Wedge 533™ Corrosion Barrier

TSH W533-CB

TenarisHydril CS®

TSH CS

TenarisHydril Wedge 503™

TSH W503

TenarisHydril CS® Corrosion Barrier

TSH CS-CB

TenarisHydril Wedge 553™

TSH W553

TenarisHydril Wedge 553™ Corrosion Barrier

TSH W553-CB

TSH / PCC / Version 01 / March 2009

technology

Dimensional Range

Dimensional Range

3/4" TO 3 1/2" Connections by technology

PIPE SPECIFICATIONS

1 1/2 (1.990 OD)

2 1/16 2 3/8

2 7/8

3 1/2

0.140

3.02

0.191

3.24

0.198

2.90

0.145

3.64

0.200

4.19

0.219

3.25

0.156

4.50

0.225

4.60 4.70

0.190









5.10 5.30

0.218







5.80 5.95

0.254







6.20

0.261

6.30

0.280

6.60

0.295

7.35 7.45 7.70

0.336

• • •

6.40 6.50

0.217



7.70 7.80 7.90

0.276

8.60 8.70

PH4™ PH6™ CS®

0.179

2.40

PJD™

2.25

MS™

• •

3SB™

0.133

Wedge 511™

0.154

1.80

Wedge 553™

1.50

Wedge 503™



Wedge 533™

0.113

Wedge 563™

1.20

• • • • •



• • •







• • • • •



























• •

• •















0.308







9.35 9.50 9.60

0.340



9.80

0.362

10.50 10.70

0.392

• •

10.70 11.00

0.405



11.50 11.65

0.440

7.70

0.216

9.20 9.30

0.254

• •

10.20 10.30

0.289

12.80

0.368

12.70 12.95



• •







• •













































































0.375





13.70

0.413

14.30

0.430

14.70 15.10 15.50 15.80











• •



• •

























• •













0.449

• • •

0.476







• •





DIMENSIONAL RANGE

1 1/4 (1.660 OD)

in

PREMIUM CONNECTIONS CATALOGUE

TSH / PCC / Version 01 / March 2009

1 (1.315 OD)

Legacy Series





TenarisHydril

3/4 (1.050 OD)

Wedge Series 500™

lb/ft

Blue™ Thermal Liner

in

Nominal Wall Blue™ Series Weight Thickness Blue™

Outside Diameter

19

Dimensional Range

3 1/2" TO 5 1/2" Connections by technology

PIPE SPECIFICATIONS

0.510

17.00 17.05

0.530

8.20

0.190

9.50

0.226

10.90 11.00

0.262

11.60

0.286

13.00 13.20 13.40

4 1/2

5

5 1/2

Wedge 511™

16.70

Wedge 521™

3 1/2

Legacy Series

• •

• •

14.80 14.85

0.380









16.10

0.415





0.430

18.90 19.00

0.500

• • •



16.50











21.10

0.562

22.20 22.50

0.610

• •

• •

• •



• •

10.50

0.224

11.00

0.237

11.60

0.250

12.60 12.75

0.271

13.50

0.290

15.10 15.20 15.50

0.337

16.60

0.375

16.90 17.00

0.380

17.70

0.402

18.80 18.90 19.20

0.430

21.50 21.60

0.500

23.70 24.00

0.560

26.10 26.50

0.630

13.00

0.253

15.00

0.296

18.00

0.362

20.30

0.408

20.80 21.00

0.422

21.40

0.437

23.20

0.478

24.10

0.500

26.70

0.562

27.00

0.560

29.20

0.625

31.60

0.687

34.00

0.750

14.00

0.244

15.50

0.275





• •

• •

• •

• •

• •

• •

• •

• •

• •

• •









• •







• •

• • • • •



• • • •

• •

• •





PH4™ PH6™ CS®

• •

SLX™





PJD™

0.330

• •

• •



HW™



MS™



3SB™

• • •

Wedge 513™

• •

Wedge 553™

• •

Wedge 503™

Wedge 533™

in

Wedge Series 500™ Wedge 563™

lb/ft

Blue™ Series Blue™ Near Flush Blue™ Thermal Liner

in

4

20

Nominal Wall Weight Thickness

Blue™

Size

• •

















• •

• • • •



• •

• • • •

• •

• •







• •

• •

• •

• •

• •

• •

• •

• •



• •

















































• • •

• •

• •

• • •

• • •

• •

• •



• • •

• • •

• •

• •

• • • •

• • •

• •

• •

• • • • •

• • •

• • •

• • • •

• •

• • •

• • •

• • • • •





• •





• •





• •

Dimensional Range

5 1/2" TO 7" Connections by technology Legacy Series

0.530

29.70

0.562

32.00

0.612

32.60

0.625

35.30

0.687

36.40

0.705

38.00

0.750

40.50

0.812

43.10

0.875

18.00

0.312

21.80

0.375

24.20

0.420

18.80

0.304

20.00

0.324

23.00

0.380

20.00

0.288 0.330

• •



22.60 23.20 24.00

0.352



















24.60

0.362

28.00

0.417

• •

• •

• •

• •



0.475

• •



32.00

• •

• •

33.00

0.500

34.50 35.00

0.525





36.70

0.562



40.20

0.625

43.70

0.687

46.00

0.730

47.10

0.750

50.40

0.812

• • • • • •

53.70

0.875

65.80

1.125

20.00

0.272

23.00

0.317

24.75

0.343

26.00

0.362

29.00

0.408

32.00

0.453

35.00

0.498

38.00

0.540

41.00

0.590

42.70

0.625

44.00

0.640

45.40 46.00

0.670

46.40

0.687

49.50

0.730

50.10

0.750

53.60

0.812

57.10

0.875

60.50

0.937

63.90

1.000

6 5/8

7

• •

• • • •

• • • • • • •





• • • • • • • • • • • • • •

• •

• • • • • •

• • • • •

• • • • • •

• • • • • • • •









• • • • • •

• •

• •

• • • •

• • • • • • •





• • • • •

• • • • •

• •

• • • •

• • •

• • • • •

• • • •

• • • • • • •











• •

• • • • • •

• • • • • •

• • • • • •

• • • • • • •

• • • • • • • • • •

• • • •

• •

• • • • • • • • • • •

• • • • •

DIMENSIONAL RANGE

6

• • • •

PREMIUM CONNECTIONS CATALOGUE

5 3/4



• •

HW™

0.500

28.40

• • • • • •

MS™

26.80



• • • • • •

3SB™

0.476

• • • • • • •

Wedge 511™

0.415

26.00

• • • • •

Wedge 513™

23.00

• • • • • • •

Wedge 521™

0.361

Wedge 523™

0.304

20.00

Wedge 553™

17.00

Wedge 533™

5 1/2

Wedge 563™

in

Blue™ Near Flush Blue™ Thermal Liner

lb/ft

Blue™

in

PH4™ PH6™ CS®

Wedge Series 500™

MACII™

Blue™ Series

SLX™

Nominal Wall Weight Thickness

TenarisHydril

TSH / PCC / Version 01 / March 2009

Size

ER™

PIPE SPECIFICATIONS

21

Dimensional Range

7 1/4" TO 9 5/8" Connections by technology

0.562

45.30

0.595

47.10

0.625

51.20

0.687

52.80

0.712

55.30

0.750

58.30

0.800

59.20

0.812

63.20

0.875

66.90

0.937

70.70

1.000

46.10

0.595

47.60

0.625

48.60

0.640

51.80

0.687

54.20

0.712

56.10

0.750

31.00

0.375

70.80

0.937

8 1/16

74.20

0.980

8 1/8

32.50

0.375

35.50

0.420

39.50

0.470

24.00

0.264

28.00

0.304

32.00

0.352

36.00

0.400

40.00

0.450

44.00

0.500

49.00

0.557

49.10

0.562

52.00

0.595

54.00

0.625

58.70

0.687

63.50

0.750

68.10

0.812

72.70

0.875

77.10

0.937

81.50

1.000

83.20

1.025

9

40.00

0.425

9 3/8

39.00

0.400

9 5/8

36.00

0.352

40.00

0.395

43.50

0.435

47.00

0.472

53.50

0.545

58.40

0.595

59.40

0.609

61.10

0.625

64.90

0.672

70.30

0.734

8

8 5/8

• • • •

• • •





• • •

• • •

• •

• • •



• • • •



• • • • • • •

• • • • • •















• • •

• • • • •



• • • • •





• •

• • • •

MACII™

0.500

42.80

• •

• • • •

SLX™

0.465

39.00

• •

• • •

ER™

0.430

35.80

• •

• • •

MS™

33.70

• • • • • •

• • •

3SB™

0.375

• • •

Wedge 511™

29.70

• • •

Legacy Series Wedge 513™

0.328

Wedge 521™

0.578

26.40

Wedge 523™

41.20

7 5/8

Wedge 553™

7 1/4

Wedge 533™

in

Wedge Series 500™ Wedge 563™

lb/ft

Blue™ Series Blue™ Near Flush Blue™ Thermal Liner

in

7 3/4

22

Nominal Wall Weight Thickness

Blue™

Size

HW™

PIPE SPECIFICATIONS

• • • • • • • •

• • • •

• • • •

• • •



• • • • •

• • • • •



• • •



• • •

• • • • •

• • • • •



• •



• • • • • • •

• • • • • • • • • •

• • • • • •

• • • • • • • •

• • • • • • • • • • • •

• • • • •

• • • • •

• • • • • •

• • •

• • • •

• • •

• • •

• • • • • •

• • • • • • •

• •



• • • • •

• • • • • • • • •

• • • •

• • • • •

Dimensional Range

9 5/8" TO 12 3/4" Connections by technology

62.80

0.625

65.10 65.30

0.650

67.30

0.668

68.80

0.700

70.40

0.708

72.10

0.725

66.95

0.672

68.42

0.688

10

68.80

0.700

10 1/4

82.00

0.800

10 3/4

40.50

0.350

45.50

0.400

51.00

0.450

55.50

0.495

60.70

0.545

65.70

0.595

68.80

0.636

71.10

0.650

73.20

0.672

75.90 76.60

• • •



• •

• • • •

• • • •

• • • • • •

0.700

79.20

0.734





80.80

0.750

85.30

0.797

91.20

0.859 0.922 0.984

104.30

1.000

108.70

1.047

47.00

0.375

54.00

0.435

60.00

0.489

65.00

0.534

71.00

0.582

87.50

0.734

94.00

0.797

100.50

0.859

107.10

0.922

111.50

0.945

113.50

0.984

119.90

1.047

58.80

0.470

71.80

0.582

12

74.80

0.615

12 1/16

78.10

0.640

12 3/4

88.00

0.672

94.20

0.734

101.70

0.797

109.10

0.859

116.50

0.922

123.70

0.984

• • •





• • • • • •

• • •

• • •

• •

• • • • •

• • • • • • • • •

• • • • • •

• •



• • • • •

• • • •



• •



• • • • • • • •

• •

• • • •

• • • •

• • • • •

• •

• • • •

• •



• • • •

• •

• •

• • • • • • •

• •

• •

• •





97.10

11 7/8

• •

• •

102.90

11 3/4



• •

• • • •

• • • •

• • • • • • • • • •

• •













• •





• • • • • • • •

DIMENSIONAL RANGE

0.595

9 7/8

• • • • •

• •

PREMIUM CONNECTIONS CATALOGUE

59.20

MACII™

0.984

9 3/4

SLX™

0.922

91.00

ER™

0.859

86.00

MS™

80.80

3SB™

0.797

Legacy Series Wedge 511™

0.750

75.60

Wedge 513™

71.60

Wedge 521™

9 5/8

Wedge 523™

in

Wedge 563™

lb/ft

Wedge Series 500™

Blue™ Near Flush Blue™ Thermal Liner

in

Blue™ Series Blue™

Nominal Wall Weight Thickness

TenarisHydril

TSH / PCC / Version 01 / March 2009

Size

HW™

PIPE SPECIFICATIONS

23

Dimensional Range

12 3/4" TO 17 7/8" Connections by technology

12 3/4

1.047

137.90

1.109

54.50

0.380

61.00

0.430

68.00

0.480

72.00

0.514

77.00

0.550

80.70

0.580

85.00

0.608

86.00

0.625

92.50

0.672

98.00

0.719

100.30

0.734

108.10

0.797

115.70

0.859

123.40

0.922

130.80

0.984

138.30

1.047

145.60

1.109

80.40

0.576

81.40

0.580

88.20

0.625

105.00

0.760

82.50

0.562

86.00

0.600

93.00

0.650

94.80

0.656

99.30

0.688

99.60 100.00

0.700





104.20

0.734





106.00

0.750

110.00

0.772

111.00

0.779

112.60

0.797

112.00 113.00 114.00

0.800

120.00

0.850

77.50

0.500

109.00

0.715

65.00

0.375

75.00

0.438

84.00

0.495

94.50

0.562

95.00

0.566

96.00

0.575

102.90

0.625

109.00

0.656

118.00

0.715

128.00 128.60

0.781

137.90

0.843

147.30

0.906

16 1/8

95.60

0.566

17

77.50

0.438

88.10

0.500

93.50

0.500

13 1/2 13 5/8 14

15 16

17 7/8

MACII™

SLX™

ER™

MS™

3SB™

Legacy Series Wedge 511™

Wedge 513™

Wedge 521™

Wedge 523™

Wedge 563™

in

Wedge Series 500™

130.90

13 3/8

24

lb/ft

Blue™ Near Flush

in

Nominal Wall Blue™ Series Weight Thickness Blue™

Size

HW™

PIPE SPECIFICATIONS

• • • • • • • • • •

• • • • • •

• • • • • • • •

• •

• • • • •

• • • •

• •

• • • •

• • • •



• • • • • • •

• • • • • • • • • •



• •



• •

• •



• • •

• •

• •

• • • •

• • •

• •

• • •

• • • •

• •

• •



• • • • • • •

• • • • • •

• • • •

• • • •

• • • •

• • • •

• • •

• • • • •

• • • •

Dimensional Range

20

22

24

24 1/2

0.562

121.00

0.650

• • • •

94.00

0.500

105.00

0.562

117.00

0.625

128.00

0.688

87.50

0.435

94.50

0.460

94.50

0.468

96.50

0.485

99.00 100.00

0.500



• • •

101.00

0.510

109.35

0.563

112.00 114.00

0.579

• • •



115.00

0.594

123.40

0.625

126.00

0.636

136.00

0.693

139.00

0.720

94.00

0.438

106.50

0.500

118.50

0.563

131.50

0.625

133.00

0.635

147.00

0.709

156.00

0.750

169.00

0.812

209.00

1.000

146.50

0.625

180.00

0.781

226.00

1.000

159.20

0.625

162.00

0.635

174.00

0.688

133.00

0.500

140.00

0.531

162.00

0.625

165.00

0.635

182.00

0.709

• • •

• •

• • • •

• • • • • • • • • • • • • • • • • • • • • • •

DIMENSIONAL RANGE

TSH / PCC / Version 01 / March 2009

18 5/8

105.00

PREMIUM CONNECTIONS CATALOGUE

18

in

Legacy Series

TenarisHydril

17 7/8

lb/ft

Wedge Series 500™

ER™

in

Nominal Wall Weight Thickness

Wedge 511™

Size

Connections by technology

Wedge 521™

PIPE SPECIFICATIONS

17 7/8" TO 24 1/2"

25

Casing & Tubing Connections

28

Blue™

4 1/2" to 13 5/8"

3SB™

Wedge 563™

Blue™ Thermal Liner

4 1/2" to 13 5/8"

5" to 16"

4 1/2" to 10 3/4"

Dopeless® technology available

Threaded & Coupled

Casing Connections

29

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING CONNECTIONS

MS™

ER™

HW™

4 1/2" to 14"

7" to 24 1/2"

5" to 14"

Dopeless® technology available

30

SLX™

Wedge 521™ 5" TO 18 5/8"

4 1/2" to 13 5/8"

Wedge 523™

Blue™ Near Flush

7" to 16"

5" to 13 5/8"

Integral Semi Flush

Casing Connections

31

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING CONNECTIONS

MACII™

Wedge 513™

Wedge 511™

4" to 16"

2 1/16 TO 18 5/8"

Integral Flush

5 1/2" to 16"

32

Blue™

Wedge 563™

Blue™ Thermal Liner

2 3/8" to 4 1/2"

2 3/8" to 4 1/2"

2 3/8" to 4 1/2"

Dopeless® technology available

Threaded & Coupled

Tubing Connections

33

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

TUBING CONNECTIONS

3SB™

MS™

2 3/8" to 4 1/2"

2 3/8" to 4 1/2"

34

Wedge 533™

Wedge 553™

Wedge 503™

2 3/8" to 7 5/8"

2 3/8" to 7 5/8"

2 3/8" to 4 1/2"

Integral Upset

Tubing Connections

35

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

TUBING CONNECTIONS

3/4" to 7"

PJD™

PH4™ / PH6™ / CS®

2 3/8" to 5"

Connections by Technology

Blue™ Series

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING & TUBING CONNECTIONS

Blue™ 2 3/8" TO 13 5/8"

Dopeless® technology available

39

. Trouble-free make-up is developed with

1

the rugged, coarse pitch thread and steep taper for deep stabbing.

1

. Superior compression strength obtained

2

by optimized torque shoulder and controlled 25 degree stab flank reduced clearance.

2 3

. 100% internal and external pressure metal seal. . Toroidal design generates stable seal

3

behavior for all combined-load conditions.

. tubing and workstrings . Design for high performance and versatility. . Production Drilling with casing 13679 CAL IV tested and field proven. . Liners . ISO Dopeless option: Improved operational . Horizontal and extended reach wells performance through less pipe handling . Thermal wells . HP/HT and deep wells make-up stability. . and Avoid well contamination improving . productivity. . Dopeless Enhance environmental protection . Matched strength allowing zero discharge operations. . Special bevel . Corrosion barrier . Intermediate casing . Special clearance . Production casing and tie-backs features

®

Options

®

APPLICATIONS

40

Blue™

2 3/8" TO 5" (5 1/2" TO 9 5/8" on reverse side)

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

4.60 5.10 5.80 6.30 6.60 7.35 6.40 7.80 8.60 9.35 9.80 10.50 10.70 7.70 9.20 10.20 12.70 13.70 14.30 14.70 15.50 8.20 9.50 10.90 13.20 14.85 16.10 16.50 18.90 10.50 11.60 12.60 13.50 15.20 16.60 17.00 17.70 18.90 21.50 13.00 15.00 18.00 20.30 20.80 21.40 23.20 24.10 26.70

0.190 0.218 0.254 0.280 0.295 0.336 0.217 0.276 0.308 0.340 0.362 0.392 0.405 0.216 0.254 0.289 0.375 0.413 0.430 0.449 0.476 0.190 0.226 0.262 0.330 0.380 0.415 0.430 0.500 0.224 0.250 0.271 0.290 0.337 0.375 0.380 0.402 0.430 0.500 0.253 0.296 0.362 0.408 0.422 0.437 0.478 0.500 0.562

1.995 1.939 1.867 1.815 1.785 1.704 2.441 2.323 2.259 2.195 2.152 2.091 2.065 3.068 2.992 2.922 2.750 2.674 2.640 2.602 2.548 3.620 3.548 3.476 3.340 3.240 3.170 3.140 3.000 4.052 4.000 3.958 3.920 3.826 3.750 3.740 3.696 3.640 3.500 4.494 4.408 4.276 4.184 4.156 4.126 4.044 4.000 3.876

1.901 1.845 1.774 1.722 1.692 1.610 2.348 2.230 2.166 2.101 2.058 1.997 1.971 2.943 2.867 2.797 2.624 2.549 2.515 2.477 2.423 3.494 3.423 3.351 3.215 3.115 3.045 3.015 2.875 3.927 3.875 3.833 3.794 3.701 3.625 3.615 3.571 3.515 3.375 4.369 4.283 4.151 4.059 4.031 4.001 3.919 3.875 3.751

2.776 2.776 2.827 2.846 2.862 2.913 3.307 3.346 3.386 3.437 3.449 3.488 3.504 3.937 3.937 4.016 4.150 4.150 4.169 4.193 4.228 4.441 4.441 4.441 4.567 4.610 4.661 4.681 4.776 4.921 4.921 4.961 5.000 5.047 5.106 5.114 5.146 5.189 5.287 5.512 5.512 5.630 5.650 5.673 5.693 5.756 5.787 5.874

1.947 1.915 1.868 1.833 1.837 1.797 2.406 2.339 2.276 2.228 2.209 2.185 2.161 3.016 2.969 2.906 2.799 2.772 2.736 2.720 2.720 3.537 3.474 3.431 3.356 3.281 3.262 3.234 3.093 3.996 3.957 3.917 3.878 3.823 3.799 3.791 3.768 3.740 3.602 4.421 4.350 4.264 4.209 4.193 4.185 4.134 4.091 3.969

2.655 2.655 2.655 2.655 2.655 2.655 3.202 3.202 3.202 3.202 3.202 3.202 3.202 3.616 3.616 3.616 3.616 3.616 3.616 3.616 3.616 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 4.012 4.012 4.012 4.012 4.012 4.010 4.012 4.012 4.012 4.012 4.579 4.579 4.579 4.579 4.579 4.579 4.579 4.579 4.579

1.668 1.668 1.893 1.981 2.052 2.283 2.279 2.485 2.692 2.967 3.030 3.246 3.333 2.895 2.895 3.388 4.245 4.245 4.374 4.529 4.765 3.340 3.340 3.340 4.232 4.543 4.917 5.061 5.763 3.641 3.641 3.946 4.255 4.628 5.099 5.162 5.416 5.768 6.577 5.051 5.051 6.085 6.259 6.470 6.645 7.212 7.497 8.291

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

2 3/8

TSH / PCC / Version 01 / March 2009

2 7/8

3 1/2

4

4 1/2

5

Options

Coupling

5.906 5.906 5.906 5.906 5.906 5.906 7.205 7.205 7.205 7.205 7.205 7.205 7.205 8.228 8.228 8.228 8.228 8.228 8.228 8.228 8.228 8.780 8.780 8.780 8.780 8.780 8.780 8.780 8.780 9.213 9.213 9.213 9.213 9.213 9.213 9.213 9.213 9.213 9.213 10.551 10.551 10.551 10.551 10.551 10.551 10.551 10.551 10.551

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Special Clearance Coupling 110 ksi

125 ksi

x 1000 lb

72 81 93 101 106 118 100 124 137 149 157 168 173 123 142 160 202 220 228 237 249 125 147 169 209 238 257 265 302 166 184 198 211 242 267 271 285 302 346 208 241 290 324 334 345 373 389 431

104 118 135 147 154 172 145 180 199 217 228 245 251 178 207 233 295 320 332 344 362 182 214 246 304 346 374 386 440 241 267 288 307 353 389 393 414 440 503 302 350 422 471 486 501 543 565 627

117 133 152 166 173 193 163 203 224 244 257 275 283 201 233 262 331 360 373 387 407 205 241 277 342 389 421 434 495 271 300 324 345 397 437 443 466 495 565 340 394 475 530 546 564 611 636 705

124 140 161 175 183 204 172 214 236 257 271 290 299 212 246 277 350 381 394 409 430 216 255 292 361 411 444 458 522 286 317 342 364 419 462 467 492 522 597 358 416 501 559 577 595 645 672 744

143 162 186 203 212 236 199 248 273 298 314 336 346 245 285 321 405 441 456 473 497 250 295 338 419 475 514 530 605 331 367 396 422 485 535 541 569 605 691 415 481 580 647 668 689 747 778 862

163 185 212 230 241 269 227 282 310 338 357 382 393 279 324 364 460 501 518 538 565 284 335 385 476 540 584 603 687 376 417 450 479 551 607 615 647 687 785 472 547 659 736 759 783 849 884 979

Matched StRENgth

Outside Diameter

Critical Section Area

Tensile Efficiency

Outside Diameter

in

sq in

%

in

2.646 2.681 2.720 2.752 2.768 2.811 3.161 3.236 3.276 3.311 3.335 3.370 3.382 3.772 3.823 3.870 3.976 4.020 4.035 4.059 4.087 4.276 4.287 4.335 4.425 4.488 4.531 4.547 4.630 4.780 4.815 4.846 4.870 4.933 4.992 4.992 5.020 5.051 5.138 5.315 5.354 5.445 5.508 5.524 5.543 5.594 5.622 5.693

1.114 1.263 1.431 1.566 1.634 1.823 1.539 1.914 2.116 2.299 2.423 2.609 2.672 1.894 2.199 2.485 3.140 3.413 3.512 3.663 3.838 2.209 2.288 2.607 3.230 3.672 3.979 4.090 4.687 2.562 2.829 3.067 3.247 3.732 4.193 4.193 4.410 4.659 5.352 3.377 3.708 4.475 5.017 5.154 5.324 5.772 6.016 6.645

85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 97.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 86.0 85.0 85.0 85.0 85.0 90.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0

2.705 2.744 2.795 2.831 2.850 2.902 3.228 3.319 3.366 3.409 3.437 3.476 3.492 3.843 3.906 3.961 4.087 4.138 — — — 4.299 4.362 4.421 4.528 — — — — 4.854 4.898 4.933 4.965 — — — — — — 5.382 5.453 5.563 5.634 5.657 5.677 5.740 5.772 5.858

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.

41

Blue™

5 1/2" TO 9 5/8"

Options

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

15.50 17.00 20.00 23.00 26.00 26.80 28.40 29.70 32.60 20.00 23.20 24.00 28.00 32.00 35.00 36.70 23.00 24.75 26.00 29.00 32.00 35.00 38.00 41.00 29.70 33.70 35.80 39.00 42.80 45.30 46.10 47.60 48.60 51.80 56.10 36.00 40.00 44.00 49.00 52.00 54.00 58.70 36.00 40.00 43.50 47.00 53.50 58.40 59.40 61.10 64.90 70.30

0.275 0.304 0.361 0.415 0.476 0.500 0.530 0.562 0.625 0.288 0.330 0.352 0.417 0.475 0.525 0.562 0.317 0.343 0.362 0.408 0.453 0.498 0.540 0.590 0.375 0.430 0.465 0.500 0.562 0.595 0.595 0.625 0.640 0.687 0.750 0.400 0.450 0.500 0.557 0.595 0.625 0.687 0.352 0.395 0.435 0.472 0.545 0.595 0.609 0.625 0.672 0.734

4.950 4.892 4.778 4.670 4.548 4.500 4.440 4.376 4.250 6.049 5.965 5.921 5.791 5.675 5.575 5.502 6.366 6.314 6.276 6.184 6.094 6.004 5.920 5.820 6.875 6.765 6.695 6.625 6.502 6.435 6.560 6.500 6.470 6.376 6.250 7.825 7.725 7.625 7.511 7.435 7.375 7.251 8.921 8.835 8.755 8.681 8.535 8.435 8.407 8.375 8.281 8.157

4.824 4.767 4.653 4.545 4.423* 4.375 4.315 4.251 4.124 5.924 5.840 5.796 5.666 5.550 5.450 5.376 6.241* 6.189 6.151 6.059 5.969* 5.879 5.794* 5.694 6.750 6.640 6.570 6.500 6.376 6.310* 6.435* 6.374 6.344 6.251 6.125 7.700 7.600* 7.500 7.386 7.310 7.250 7.126 8.765 8.679 8.599* 8.525 8.379* 8.279* 8.251 8.219 8.125 8.001

10.748 10.748 10.748 10.748 10.748 10.748 10.748 10.748 10.748 10.551 10.551 10.551 10.551 10.551 10.551 10.551 10.551 10.551 10.551 10.551 10.551 10.551 10.551 10.551 10.669 10.669 10.669 10.669 10.669 10.669 11.496 11.496 11.496 11.496 11.496 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693

4.911 4.860 4.789 4.695 4.616 4.589 4.530 4.506 4.427 5.973 5.894 5.855 5.749 5.678 5.619 5.623 6.287 6.228 6.189 6.118 6.063 6.012 5.969 5.890 6.801 6.699 6.659 6.604 6.553 6.561 6.691 6.632 6.600 6.506 6.380 7.787 7.709 7.650 7.535 7.496 7.437 7.390 8.829 8.781 8.711 8.659 8.545 8.494 8.553 8.514 8.435 8.356

4.677 4.677 4.677 4.677 4.677 4.677 4.677 4.677 4.677 4.480 4.480 4.480 4.480 4.480 4.480 4.480 4.480 4.480 4.480 4.480 4.480 4.480 4.480 4.480 4.551 4.551 4.551 4.551 4.551 4.551 4.968 4.968 4.968 4.968 4.968 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065

6.006 6.006 6.381 7.141 8.378 8.378 8.807 9.123 9.998 8.361 8.361 8.361 9.585 9.815 10.782 11.340 9.221 9.221 9.221 9.221 9.889 10.802 11.577 12.555 11.803 12.326 12.326 12.746 13.325 14.014 14.792 14.792 15.226 16.205 17.524 14.328 14.328 14.328 16.397 16.397 16.576 18.073 18.209 18.209 18.209 18.209 18.209 18.209 18.209 18.670 19.925 21.592

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

5 1/2

6 5/8

7

7 5/8

7 3/4

8 5/8

9 5/8

Coupling

6.063 6.063 6.102 6.181 6.307 6.307 6.350 6.382 6.469 7.283 7.283 7.283 7.390 7.409 7.492 7.539 7.677 7.677 7.677 7.677 7.732 7.807 7.870 7.949 8.425 8.465 8.465 8.496 8.539 8.591 8.740 8.740 8.772 8.843 8.937 9.488 9.488 9.488 9.626 9.626 9.638 9.736 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.654 10.728 10.827

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option. 42

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Special Clearance Coupling 110 ksi

125 ksi

x 1000 lb

248 273 321 365 413 432 455 480 526 315 359 382 447 505 553 588 366 395 415 465 512 559 603 653 470 535 575 616 685 723 736 769 786 838 907 568 636 702 776 826 864 942 564 630 691 746 855 928 949 972 1040 1128

361 397 466 530 601 628 662 697 766 459 522 555 651 734 805 856 532 574 604 676 745 814 877 950 683 778 837 895 997 1051 1070 1119 1144 1220 1319 827 925 1021 1129 1201 1257 1371 820 916 1005 1086 1244 1350 1380 1414 1512 1640

406 447 525 597 676 707 745 785 861 516 587 624 732 826 905 963 599 646 679 760 839 916 986 1069 769 875 941 1007 1121 1183 1204 1259 1287 1372 1484 930 1040 1149 1271 1351 1414 1542 923 1031 1130 1222 1399 1519 1552 1590 1701 1845

429 471 554 630 714 746 786 828 909 545 620 659 773 872 956 1016 632 681 717 803 885 966 1041 1129 811 923 994 1063 1184 1248 1271 1329 1358 1448 1567 982 1098 1212 1341 1426 1492 1628 974 1088 1193 1289 1477 1604 1639 1679 1796 1948

497 546 641 729 826 864 910 959 1053 631 718 763 895 1010 1107 1177 732 789 830 929 1025 1119 1206 1307 940 1069 1151 1231 1371 1445 1471 1539 1573 1677 1814 1137 1271 1404 1553 1651 1728 1885 1128 1260 1381 1493 1710 1857 1897 1944 2079 2255

564 620 729 829 939 982 1034 1090 1197 717 816 867 1017 1147 1258 1337 832 897 944 1056 1165 1272 1370 1485 1068 1215 1307 1399 1558 1643 1672 1749 1787 1905 2062 1292 1445 1595 1765 1876 1964 2142 1282 1432 1570 1697 1943 2110 2156 2209 2363 2563

Matched StRENgth

Outside Diameter

Critical Section Area

Tensile Efficiency

Outside Diameter

in

sq in

%

in

5.831 5.874 5.953 6.024 6.102 6.134 6.169 6.209 6.283 7.020 7.051 7.063 7.157 7.236 7.299 7.346 7.409 7.413 7.441 7.508 7.567 7.630 7.685 7.748 8.075 8.154 8.201 8.252 8.335 8.378 8.488 8.528 8.547 8.606 8.685 9.126 9.181 9.252 9.331 9.382 9.421 9.504 10.079 10.122 10.165 10.217 10.323 10.394 10.409 10.433 10.496 10.579

3.836 4.235 4.965 5.631 6.381 6.685 7.026 7.409 8.144 5.397 5.746 5.876 6.932 7.821 8.541 9.085 6.050 6.095 6.417 7.203 7.902 8.654 9.316 10.080 7.263 8.266 8.874 9.534 10.611 11.180 11.383 11.909 12.172 12.969 14.037 9.033 9.825 10.852 12.000 12.753 13.335 14.564 9.309 9.998 10.687 11.506 13.222 14.375 14.632 15.018 16.053 17.422

85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 94.0 88.0 85.0 85.0 85.0 85.0 85.0 91.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 87.0 85.0 85.0 85.0 85.0 85.0 85.0 91.0 87.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0

5.925 5.972 6.067 6.157 6.220 6.287 6.331 — — 7.071 7.146 7.181 7.291 7.386 7.465 7.520 7.484 7.531 7.563 7.642 — — — — 8.201 8.295 8.354 8.413 8.512 8.563 8.677 8.724 8.744 8.819 8.909 9.244 9.331 9.417 9.512 9.575 — — 10.165 10.240 10.311 10.378 10.504 10.587 — — — —

Blue™

9 7/8" TO 13 5/8"

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

62.80 68.80 70.40 72.10 40.50 45.50 51.00 55.50 60.70 65.70 73.20 76.60 79.20 54.00 60.00 65.00 71.00 58.80 71.80 54.50 61.00 68.00 72.00 77.00 80.70 85.00 86.00 98.00 88.20

0.625 0.700 0.707 0.725 0.350 0.400 0.450 0.495 0.545 0.595 0.672 0.700 0.734 0.435 0.489 0.534 0.582 0.470 0.582 0.380 0.430 0.480 0.514 0.550 0.580 0.608 0.625 0.719 0.625

5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.065 5.361 5.361 5.719 5.719 5.719 5.719 5.719 5.719 5.719 5.719 5.719 5.719

21.030 21.030 21.030 21.847 16.807 16.807 18.244 18.966 19.980 22.611 23.348 23.348 24.383 21.702 21.702 21.702 21.702 21.884 21.884 20.906 20.906 22.664 22.664 23.724 24.964 26.032 26.745 30.515 27.277

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

9 7/8

10 3/4

TSH / PCC / Version 01 / March 2009

Options

11 3/4

11 7/8 13 3/8

13 5/8

8.625 8.475 8.461 8.425 10.050 9.950 9.850 9.760 9.660 9.560 9.406 9.350 9.282 10.880 10.772 10.682 10.586 10.935 10.711 12.615 12.515 12.415 12.347 12.275 12.215 12.159 12.125 11.937 12.375

Coupling

8.469 * 8.319 * 8.305 * 8.269 * 9.894 9.794 9.694 9.604 * 9.504 9.404 * 9.250 9.194 9.126 10.724 10.616 * 10.526 * 10.430 10.779 10.555 * 12.459 12.359 12.259 12.191 * 12.119 12.059 12.003 11.969 * 11.781 12.187 *

10.984 10.984 10.984 11.031 11.575 11.575 11.654 11.693 11.748 11.890 11.929 11.929 11.984 12.752 12.752 12.752 12.752 12.854 12.854 14.173 14.173 14.252 14.252 14.299 14.354 14.402 14.433 14.598 14.665

11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 11.693 12.283 12.283 13.031 13.031 13.031 13.031 13.031 13.031 13.031 13.031 13.031 12.992

8.691 8.593 8.608 8.573 9.966 9.887 9.809 9.754 9.694 9.635 9.558 9.506 9.454 10.950 10.831 10.753 10.670 10.973 10.879 12.520 12.442 12.371 12.312 12.261 12.221 12.182 12.174 12.150 12.422

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Special Clearance Coupling 110 ksi

125 ksi

x 1000 lb

999 1110 1120 1146 629 715 801 877 961 1044 1170 1216 1270 850 951 1035 1123 926 1136 853 962 1069 1142 1219 1282 1341 1377 1572 1404

1453 1614 1629 1667 915 1040 1165 1276 1398 1519 1702 1768 1848 1237 1384 1505 1634 1347 1652 1241 1399 1556 1661 1773 1865 1951 2003 2287 2042

1635 1816 1833 1876 1029 1171 1311 1435 1573 1708 1915 1989 2079 1392 1557 1693 1838 1516 1858 1396 1574 1750 1869 1994 2098 2195 2253 2573 2297

1725 1917 1934 1980 1086 1236 1383 1515 1660 1803 2021 2100 2194 1469 1643 1788 1940 1600 1962 1474 1661 1847 1973 2105 2215 2317 2378 2716 2425

1998 2219 2240 2292 1258 1431 1602 1754 1922 2088 2340 2431 2541 1701 1903 2070 2246 1852 2271 1706 1924 2139 2284 2438 2565 2682 2754 3145 2808

2270 2522 2545 2605 1429 1626 1820 1993 2184 2373 2660 2763 2887 1933 2162 2352 2552 2105 2581 1939 2186 2431 2596 2770 2914 3048 3129 3573 3191

Matched StRENgth

Outside Diameter

Critical Section Area

Tensile Efficiency

Outside Diameter

in

sq in

%

in

10.654 10.756 10.768 10.791 11.217 11.256 11.327 11.394 11.469 11.539 11.646 11.685 11.728 12.319 12.398 12.465 12.531 12.472 12.638 13.858 13.898 13.976 14.028 14.079 14.122 14.165 14.189 14.323 14.421

15.410 17.132 17.332 17.732 10.394 11.089 12.346 13.539 14.883 16.163 18.099 18.820 19.617 13.175 14.703 16.010 17.324 14.288 17.549 13.973 14.830 16.556 17.681 18.811 19.770 20.731 21.258 24.256 21.702

85.0 85.0 85.0 85.0 91.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 90.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0

10.858 — — — 11.303 11.394 11.484 11.563 11.650 11.736 11.862 — — 12.469 12.567 12.646 12.728 12.638 12.835 13.957 14.051 14.142 14.205 14.268 14.323 14.370 14.402 14.563 14.634

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.

43

PREMIUM CONNECTIONS CATALOGUE

CASING & TUBING CONNECTIONS

2 3/8" TO 10 3/4"

(*) TenarisHydril Blue™ Thermal Liner was formerly known as TenarisHydril Blue™ SAGD. They are completely interchangeable.

TenarisHydril

Blue™ Thermal Liner (*)

45

1

. Special bevel design option reduces

1

potential problems for coupling face hang-up during running.

2

. Trouble-free make-up is developed

2

with the rugged, coarse pitch thread and steep taper for deep stabbing.

3

. Special coupling torque shoulder design

3

provides high torque and compression capacity for rotating applications.

. Special design for slotted pipes to be . Matched strength . Special clearance used on SAGD operations. . Fast and easy make-up with no cross- . Special bevel features

threading risk.

. Drilling with casing . Liners . Horizontal and extended reach wells . Thermal wells APPLICATIONS

46

Options

Blue™ Thermal Liner

Options

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

4.60 5.10 5.80 6.40 7.70 8.60 9.20 10.20 12.70 10.50 11.60 12.60 13.50 15.10 17.00 23.70 15.50 17.00 20.00 23.00 26.00 26.80 20.00 24.00 28.00 32.00 20.00 23.00 26.00 29.00 32.00 35.00 24.00 28.00 32.00 36.00 40.00 36.00 40.00 43.50 47.00 53.50 45.50 51.00 55.50 60.70

0.190 0.218 0.254 0.217 0.276 0.308 0.254 0.289 0.375 0.224 0.250 0.271 0.290 0.337 0.380 0.560 0.275 0.304 0.361 0.415 0.476 0.500 0.288 0.352 0.417 0.475 0.272 0.317 0.362 0.408 0.453 0.498 0.264 0.304 0.352 0.400 0.450 0.352 0.395 0.435 0.472 0.545 0.400 0.450 0.495 0.545

1.995 1.939 1.867 2.441 2.323 2.259 2.992 2.922 2.750 4.052 4.000 3.958 3.920 3.826 3.740 3.380 4.950 4.892 4.778 4.670 4.548 4.500 6.049 5.921 5.791 5.675 6.456 6.366 6.276 6.184 6.094 6.004 8.097 8.017 7.921 7.825 7.725 8.921 8.835 8.755 8.681 8.535 9.950 9.850 9.760 9.660

1.901 1.845 1.773 2.347 2.229 2.165 2.867 2.797 2.625 3.927 3.875 3.833 3.795 3.701 * 3.615 3.255 4.825 4.767 4.653 4.545 4.423 * 4.375 5.924 5.796 5.666 5.550 6.331 6.241 * 6.151 6.059 5.969 * 5.879 7.972 7.892 7.796 * 7.700 7.600 * 8.765 8.679 * 8.599 * 8.525 8.379 * 9.794 * 9.694 9.604 * 9.504

6.319 6.319 6.319 6.949 6.949 6.949 8.051 8.051 8.051 9.311 9.311 9.311 9.311 9.311 9.311 9.311 9.783 9.783 9.783 9.783 9.783 9.783 9.783 9.783 9.783 9.783 10.098 10.098 10.098 10.098 10.098 10.098 10.445 10.445 10.445 10.445 10.445 11.004 11.004 11.004 11.004 11.004 11.949 11.949 11.949 11.949

1.937 1.878 1.827 2.382 2.272 2.209 2.939 2.900 2.853 4.016 4.000 3.921 3.921 3.854 3.827 3.717 4.878 4.827 4.772 4.705 4.681 4.650 5.992 5.870 5.760 5.646 6.382 6.291 6.209 6.150 6.039 5.965 8.004 7.968 7.925 7.840 7.791 8.911 8.872 8.837 8.755 8.683 9.965 9.920 9.880 9.780

2.520 2.520 2.520 2.835 2.835 2.835 3.386 3.386 3.386 4.016 4.016 4.016 4.016 4.016 4.016 4.016 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.409 4.409 4.409 4.409 4.409 4.409 4.634 4.634 4.634 4.634 4.634 4.913 4.913 4.913 4.913 4.913 5.386 5.386 5.386 5.386

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

2 3/8

2 7/8

3 1/2

TSH / PCC / Version 01 / March 2009

2 3/8" TO 10 3/4"

4 1/2

5 1/2

6 5/8

7

8 5/8

9 5/8

10 3/4

Coupling

2.795 2.795 2.795 3.337 3.406 3.406 3.917 3.996 3.957 4.921 4.921 4.921 4.961 5.079 5.079 5.299 6.051 6.051 6.051 6.146 6.260 6.260 7.346 7.346 7.346 7.346 7.657 7.657 7.657 7.657 7.717 7.756 9.252 9.252 9.252 9.370 9.370 10.256 10.256 10.394 10.394 10.606 11.463 11.463 11.632 11.632

1.817 1.817 1.817 2.441 2.806 2.806 2.834 3.324 4.204 3.952 3.952 3.952 4.258 5.189 5.189 6.986 6.067 6.067 6.067 6.972 8.085 8.085 9.477 9.477 9.477 9.477 9.336 9.336 9.336 9.336 10.050 10.528 10.662 10.662 10.662 12.389 12.389 12.413 12.413 14.648 14.648 18.154 15.445 15.445 18.516 18.516

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Special Clearance Coupling 110 ksi

125 ksi

x 1000 lb

72 81 93 100 124 137 142 160 169 166 184 198 211 242 271 381 248 273 321 365 413 432 315 382 447 505 316 366 415 465 512 559 381 437 503 568 636 564 630 691 746 855 715 801 877 961

104 118 135 145 180 199 207 233 246 241 267 288 307 353 393 555 361 397 466 530 601 628 459 555 651 734 460 532 604 676 745 814 555 636 732 827 925 820 916 1005 1086 1244 1040 1165 1276 1398

117 133 152 163 203 224 233 262 277 271 300 324 345 397 443 624 406 447 525 597 676 707 516 624 732 826 517 599 679 760 839 916 624 715 823 930 1040 923 1031 1130 1222 1399 1171 1311 1435 1573

124 140 161 172 214 236 246 277 292 286 317 342 364 419 467 659 429 471 554 630 714 746 545 659 773 872 546 632 717 803 885 966 659 755 869 982 1098 974 1088 1193 1289 1477 1236 1383 1515 1660

143 162 186 199 248 273 285 321 338 331 367 396 422 485 541 762 497 546 641 729 826 864 631 763 895 1010 632 732 830 929 1025 1119 763 874 1006 1137 1271 1128 1260 1381 1493 1710 1431 1602 1754 1922

163 185 212 227 282 310 324 364 385 376 417 450 479 551 615 866 564 620 729 829 939 982 717 867 1017 1147 719 832 944 1056 1165 1272 867 993 1144 1292 1445 1282 1432 1570 1697 1943 1626 1820 1993 2184

Matched StRENgth

Outside Diameter

Critical Section Area

Tensile Efficiency

Outside Diameter

in

sq in

%

in

2.661 2.705 2.744 3.181 3.260 3.299 3.839 3.886 3.996 4.764 4.803 4.835 4.862 4.929 4.988 5.215 5.843 5.886 5.972 6.047 6.130 6.165 6.965 7.063 7.157 7.244 7.382 7.382 7.453 7.520 7.583 7.650 9.075 9.075 9.075 9.144 9.219 10.110 10.110 10.171 10.226 10.335 11.238 11.317 11.384 11.459

1.243 1.426 1.595 1.645 2.043 2.246 2.354 2.641 3.323 2.754 3.050 3.289 3.498 4.013 4.473 6.287 4.118 4.517 5.324 6.030 6.820 7.163 5.185 6.268 7.324 8.303 6.081 6.081 6.907 7.694 8.441 9.241 8.111 8.111 8.111 9.097 10.176 10.083 10.083 11.055 11.938 13.687 11.444 12.839 14.032 15.374

95.3 96.5 94.2 90.8 90.7 90.4 90.9 90.6 90.3 91.5 91.4 91.4 91.2 91.0 90.9 90.7 91.2 91.0 91.4 90.9 90.8 91.2 90.4 90.4 90.1 90.5 100 91.4 91.5 91.1 90.6 90.8 100 100 88.7 88.0 88.0 98.3 88.0 88.0 88.0 88.0 88.0 88.2 88.0 88.0

2.673 2.717 2.764 3.213 3.299 3.343 3.874 3.929 4.051 4.795 4.839 4.874 4.906 4.976 5.043 5.299 5.882 5.933 6.024 6.106 6.201 6.236 7.012 7.122 7.228 7.319 7.350 7.429 7.504 7.583 7.654 7.724 — 9.067 9.150 9.232 9.315 10.122 10.197 10.268 10.331 10.449 11.327 11.413 11.492 11.575

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.

47

5" TO 13 5/8"

PREMIUM CONNECTIONS CATALOGUE

CASING CONNECTIONS

Dopeless® technology available

TenarisHydril

Blue™ Near Flush

49

. 100% external pressure integrity created

1

by toroidal external metal to metal seals, promoting consistent seal contact loading for all combined-load conditions.

1

. Superior compression strength, up to

2 2

.

50%, obtained by optimized torque shoulder and controlled 20 degree stab flank reduced clearance. Hooked threads provide high tension strength, up to 78%, by resisting the tendency for radial disengagement, virtually eliminating thread pull-out.

. 100% internal pressure integrity created

3

by toroidal internal metal to metal seals, promoting consistent seal contact loading for all combined-load conditions.

3

. Design for high performance, structural features

. . . 50

efficiency and maximum clearance. ISO 13679 CAL IV tested and field proven. Dopeless® option: Improved operational performance through less pipe handling and make-up stability. Avoid well contamination improving productivity. Enhance environmental protection allowing zero discharge operations.

. Box OD is only 2–3% larger than pipe body (1–2% larger than API maximum) permits use in clearance situations.

. Intermediate casing . Production casing and tie-backs . Liners . HP/HT and deep wells APPLICATIONS

. Dopeless Options

®

Blue™ Near Flush

Pipe Body

Designation Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

in

18.00 23.00 26.00 29.00 32.00 35.00 38.00 41.00 29.70 33.70 39.00 42.80 45.30 47.10 46.10 48.60 36.00 40.00 44.00 49.00 52.00 40.00 43.50 47.00 53.50 58.40 64.90 62.80 65.30 68.80 68.80 51.00 55.50 60.70 65.70 54.00 60.00 65.00 71.00 71.80 61.00 68.00 72.00 77.00 80.70 86.00 88.20

0.362 0.415 0.362 0.408 0.453 0.498 0.540 0.590 0.375 0.430 0.500 0.562 0.595 0.625 0.595 0.640 0.400 0.450 0.500 0.557 0.595 0.395 0.435 0.472 0.545 0.595 0.672 0.625 0.650 0.700 0.700 0.450 0.495 0.545 0.595 0.435 0.489 0.534 0.582 0.582 0.430 0.480 0.514 0.550 0.580 0.625 0.625

5 5 1/2 7

7 5/8 TSH / PCC / Version 01 / March 2009

5" TO 13 5/8"

7 3/4 8 5/8

9 5/8

9 7/8

10 10 3/4

11 3/4

11 7/8 13 3/8

13 5/8

4.276 4.670 6.276 6.184 6.094 6.004 5.920 5.820 6.875 6.765 6.625 6.502 6.435 6.375 6.560 6.470 7.825 7.725 7.625 7.511 7.435 8.835 8.755 8.681 8.536 8.435 8.281 8.625 8.575 8.475 8.600 9.850 9.760 9.660 9.560 10.880 10.772 10.682 10.586 10.711 12.515 12.415 12.346 12.275 12.215 12.125 12.375

4.151 4.545 6.151 6.059 6.000 * 5.879 5.795 5.695 6.750 6.640 6.500 6.376 6.310 6.250 6.500 * 6.375 7.700 7.625 * 7.500 7.386 7.310 8.679 8.625 * 8.525 8.500 * 8.375 * 8.125 8.500 * 8.419 * 8.319 * 8.500 9.694 9.625 * 9.504 9.500 * 10.724 10.625 * 10.625 * 10.430 10.625 * 12.359 12.259 12.250 * 12.119 12.059 11.968 * 12.250 *

BOX Outside Diameter

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

in

in

sq in

%

%

72.0 71.0 73.0 70.0 72.0 77.0 76.0 78.0 73.0 74.0 76.0 79.0 78.0 78.0 77.0 79.0 75.0 74.0 77.0 77.0 79.0 71.0 72.0 76.0 77.0 77.0 78.0 77.0 79.0 77.0 65.0 74.0 75.0 77.0 78.0 76.0 76.0 70.0 77.0 74.0 74.0 75.0 78.0 78.0 77.0 75.0 75.0

50.0 40.0 40.0 40.0 50.0 50.0 50.0 50.0 40.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 45.0 40.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 40.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0

5.146 5.650 7.169 7.169 7.193 7.209 7.201 7.224 7.791 7.803 7.827 7.850 7.854 7.866 7.992 8.004 8.799 8.815 8.831 8.850 8.882 9.799 9.819 9.827 9.878 9.870 9.909 10.110 10.134 10.154 10.110 10.941 10.941 10.980 10.996 11.965 11.988 12.004 12.024 12.122 13.579 13.606 13.646 13.618 13.626 13.626 13.886

4.217 4.618 6.228 6.130 6.083 5.953 5.874 5.768 6.823 6.713 6.571 6.453 6.390 6.327 6.567 6.445 7.780 7.705 7.583 7.465 7.386 8.764 8.709 8.606 8.567 8.453 8.209 8.579 8.504 8.402 8.579 9.783 9.713 9.579 9.583 10.807 10.709 10.709 10.516 10.713 12.449 12.343 12.323 12.209 12.150 12.059 12.343

4.839 4.685 5.339 4.980 5.980 5.732 5.980 5.732 5.339 5.480 5.480 6.232 6.232 6.232 5.858 6.480 5.539 5.480 5.732 5.732 6.232 5.189 4.980 5.732 5.890 5.980 6.480 5.980 6.480 6.232 5.980 5.732 6.232 5.453 6.232 5.480 5.980 5.232 5.732 5.732 5.339 5.480 6.354 5.980 5.732 5.480 5.732

3.796 4.707 5.531 5.913 6.711 7.833 8.331 9.270 6.238 7.191 8.506 9.849 10.248 10.724 10.296 11.296 7.752 8.552 9.828 10.873 11.856 8.130 9.043 10.316 11.970 12.995 14.744 13.989 14.882 15.537 13.113 10.775 11.958 13.451 14.803 11.753 13.147 13.732 15.720 15.277 12.938 14.582 16.204 17.285 17.950 18.782 19.150

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

361 447 525 562 638 744 791 881 593 683 808 936 974 1019 978 1073 736 812 934 1033 1126 772 859 980 1137 1235 1401 1329 1414 1476 1246 1024 1136 1278 1406 1117 1249 1305 1493 1451 1229 1385 1539 1642 1705 1784 1819

418 518 608 650 738 862 916 1020 686 791 936 1083 1127 1180 1133 1243 853 941 1081 1196 1304 894 995 1135 1317 1429 1622 1539 1637 1709 1442 1185 1315 1480 1628 1293 1446 1511 1729 1680 1423 1604 1782 1901 1975 2066 2107

475 588 691 739 839 979 1041 1159 780 899 1063 1231 1281 1341 1287 1412 969 1069 1229 1359 1482 1016 1130 1290 1496 1624 1843 1749 1860 1942 1639 1347 1495 1681 1850 1469 1643 1717 1965 1910 1617 1823 2026 2161 2244 2348 2394

x 1000 lb

209 259 304 325 369 431 458 510 343 396 468 542 564 590 566 621 426 470 541 598 652 447 497 567 658 715 811 769 819 855 721 593 658 740 814 646 723 755 865 840 712 802 891 951 987 1033 1053

304 377 442 473 537 627 666 742 499 575 680 788 820 858 824 904 620 684 786 870 948 650 723 825 958 1040 1180 1119 1191 1243 1049 862 957 1076 1184 940 1052 1099 1258 1222 1035 1167 1296 1383 1436 1503 1532

342 424 498 532 604 705 750 834 561 647 766 886 922 965 927 1017 698 770 885 979 1067 732 814 928 1077 1170 1327 1259 1339 1398 1180 970 1076 1211 1332 1058 1183 1236 1415 1375 1164 1312 1458 1556 1616 1690 1724

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Torque recommendation values available at www.tenaris.com/tenarishydril.

51

Wedge Series 500™

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING CONNECTIONS

Wedge 563™ Casing 5" to 16"

55

1 1

. Roller-stenciled make-up confirmation band.

2

. Trouble-free make-up is developed with

2

3

.

the rugged, coarse pitch thread and steep taper for deep stabbing. Exceptional torque strength developed through the simultaneous engagement of opposing flanks of the double hooked dovetail thread.

. 100% internal pressure rated metal seal

3

.

maintains gas sealing capability under high axial loads. The shallow angle run out chamfer on the pin ID promotes uniform stress under the seal around the full circumference of the connection.

. 100% ratings in tension and compression . Surface casing . Intermediate casing by the dovetail threads. . Production casing and tie-backs . provided 100% collapse rated thread seal . Drilling with casing created by full form contact of the . Liners dovetail threads, also providing a . Horizontal and extended reach wells secondary internal pressure seal rated . at pipe body. wells . Wedge 563™ is interchangeable with . Thermal HP/HT and deep wells features

Wedge 533™, Wedge 503™ and Wedge 553™.

56

APPLICATIONS

. Matched strength . Recess free bore (RFB) OPTIONS

Wedge 563™ - Casing

Options

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

%

%

13.00 15.00 18.00 21.40 23.20 24.10 14.00 15.50 17.00 20.00 23.00 26.00 26.80 28.40 29.70 32.60 20.00 24.00 28.00 32.00 20.00 23.00 26.00 29.00 32.00 35.00 38.00 41.00 42.70 26.40 29.70 33.70 39.00 42.80 45.30 55.30 46.10 48.60 32.00 36.00 40.00 44.00 49.00 52.00 54.00 68.10 36.00 40.00 43.50 47.00 53.50 62.80 65.10

0.253 0.296 0.362 0.437 0.478 0.500 0.244 0.275 0.304 0.361 0.415 0.476 0.500 0.530 0.562 0.625 0.288 0.352 0.417 0.475 0.272 0.317 0.362 0.408 0.453 0.498 0.540 0.590 0.625 0.328 0.375 0.430 0.500 0.562 0.595 0.750 0.595 0.640 0.352 0.400 0.450 0.500 0.557 0.595 0.625 0.812 0.352 0.395 0.435 0.472 0.545 0.625 0.650

4.494 4.408 4.276 4.126 4.044 4.000 5.012 4.950 4.892 4.778 4.670 4.548 4.500 4.440 4.376 4.250 6.049 5.921 5.791 5.675 6.456 6.366 6.276 6.184 6.094 6.004 5.920 5.820 5.750 6.969 6.875 6.765 6.625 6.501 6.435 6.125 6.560 6.470 7.921 7.825 7.725 7.625 7.511 7.435 7.375 7.001 8.921 8.835 8.755 8.681 8.535 8.625 8.575

4.369 4.283 4.151 4.001 3.919 3.875 4.887 4.825 4.767 4.653 4.545 4.423 4.375 4.315 4.251 4.125 5.924 5.796 5.666 5.550 6.331 6.241 * 6.151 6.059 5.969 * 5.879 5.795 5.695 5.625 6.844 6.750 6.640 6.500 6.376 6.310 6.000 6.435 * 6.345 * 7.796 * 7.700 7.600 * 7.500 7.386 7.310 7.250 6.876 8.765 8.679 * 8.599 8.525 8.379 * 8.469 * 8.419 *

9.25 9.25 9.25 12.00 12.00 12.00 9.25 9.25 9.25 9.25 9.25 9.75 9.75 9.75 11.25 11.25 9.25 9.25 9.25 9.25 9.25 9.25 9.25 9.25 9.25 11.25 11.25 11.25 11.25 9.25 9.25 9.25 11.25 11.25 11.25 13.50 11.50 11.50 9.25 9.25 9.25 11.25 11.25 11.25 11.25 13.50 9.25 9.25 9.25 9.25 9.25 11.25 11.25

4.444 4.358 — 4.076 — — 4.962 4.900 4.842 — — 4.498 4.450 4.390 4.326 — 5.999 5.871 — — 6.406 6.316 6.226 — — 5.954 5.870 — — 6.919 — — 6.575 — — — — — 7.938 — — 7.575 — — — 7.001 8.871 — — — — — —

3.99 3.99 3.99 5.36 5.36 5.36 3.99 3.99 3.99 3.99 3.99 4.30 4.30 4.30 5.06 5.06 4.05 4.05 4.05 4.05 4.05 4.05 4.05 4.05 4.05 5.06 5.06 5.06 5.06 4.05 4.05 4.05 5.06 5.06 5.06 6.17 5.19 5.19 4.05 4.05 4.05 5.06 5.06 5.06 5.06 6.18 4.05 4.05 4.05 4.05 4.05 5.06 5.06

95.8 100 100 95.9 100 100 95.4 100 100 100 100 100 100 100 100 100 95.7 100 100 100 95 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 95.4

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

5

5 1/2

TSH / PCC / Version 01 / March 2009

5" TO 9 7/8" (10 3/4" TO 16" on reverse side)

6 5/8

7

7 5/8

7 3/4 8 5/8

9 5/8

9 7/8

Coupling

5.563 5.563 5.563 5.750 5.750 5.750 6.050 6.050 6.050 6.050 6.050 6.125 6.125 6.125 6.250 6.250 7.390 7.390 7.390 7.390 7.656 7.656 7.656 7.656 7.656 7.750 7.750 7.750 7.750 8.500 8.500 8.500 8.500 8.500 8.500 8.500 8.500 8.500 9.625 9.625 9.625 9.625 9.625 9.625 9.625 9.625 10.625 10.625 10.625 10.625 10.625 10.625 10.625

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Matched StRENgth 110 ksi

125 ksi

x 1000 lb

199 241 290 331 373 389 212 248 273 321 365 413 432 455 480 526 301 382 447 505 300 366 415 465 512 559 603 653 688 414 470 535 616 686 723 891 736 786 503 568 636 702 776 826 864 1096 564 630 691 746 855 999 988

289 350 422 480 543 565 307 361 397 466 530 601 628 662 697 766 439 555 651 734 437 532 604 676 745 814 877 950 1001 602 683 778 895 998 1051 1296 1070 1144 732 827 925 1021 1129 1201 1257 1594 820 916 1005 1086 1244 1453 1438

326 394 475 541 611 636 346 406 447 525 597 676 707 745 785 861 494 624 732 826 491 599 679 760 839 916 986 1069 1127 677 769 875 1007 1122 1183 1458 1204 1287 823 930 1040 1149 1271 1351 1414 1794 923 1031 1130 1222 1399 1635 1617

343 416 501 571 645 672 365 429 471 554 630 714 746 786 828 909 522 659 773 872 519 632 717 803 885 966 1041 1129 1189 714 811 923 1063 1185 1248 1539 1271 1358 869 982 1098 1212 1341 1426 1492 1893 974 1088 1193 1289 1477 1725 1707

Outside Diameter in

398 481 580 661 747 778 423 497 546 641 729 826 864 910 959 1053 604 763 895 1010 600 732 830 929 1025 1119 1206 1307 1377 827 940 1069 1231 1372 1445 1782 1471 1573 1006 1137 1271 1404 1553 1651 1728 2192 1128 1260 1381 1493 1710 1998 1977

452 547 659 751 849 884 481 564 620 729 829 939 982 1034 1090 1197 686 867 1017 1147 683 832 944 1056 1165 1272 1370 1485 1565 940 1068 1215 1399 1559 1643 2025 1672 1787 1144 1292 1445 1595 1765 1876 1963 2491 1282 1432 1570 1697 1943 2270 2246

5.332 5.404 — 5.511 5.571 5.603 5.820 5.873 5.921 — — 6.057 — — 6.085 6.174 7.012 7.121 7.227 — 7.371 7.449 7.525 — — 7.557 7.623 — — 8.097 8.177 8.268 8.216 8.315 8.366 — 8.413 — 9.143 9.225 9.309 9.226 9.319 9.379 9.427 — 10.147 10.222 10.291 10.353 10.474 — —

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift. . Interchangeable where bracketed. . When no value is shown for “Connection ID”, swaging is omitted and the ID is the pipe body ID. . Torque recommendation values available at www.tenaris.com/tenarishydril. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option. 57

Wedge 563™ - Casing

10 3/4" TO 16"

Options

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

%

%

9.894 9.794* 9.694 9.604* 9.504 9.404* 9.250 9.126 10.844 10.724 10.616* 10.526* 10.430 10.555* 12.459 12.359 12.259 12.191* 12.119 12.059 12.003 11.969 12.152* 12.187* 14.750 14.750 14.500 14.382

11.750 11.750 11.750 11.750 11.750 11.750 11.750 11.750 12.750 12.750 12.750 12.750 12.750 12.750 14.375 14.375 14.375 14.375 14.375 14.375 14.375 14.375 14.375 14.625 17.000 17.000 17.000 17.000

10.00 10.00 10.00 11.50 11.50 11.50 11.50 13.00 10.00 10.00 11.50 11.50 11.50 11.50 11.50 11.50 11.50 11.50 13.25 13.25 13.25 13.25 11.50 13.25 13.25 13.25 13.25 13.25

10.000 — — 9.710 — — — — — — 10.722 — — — 12.540 12.440 — — 12.200 12.140 — — — — 14.832 14.832 — —

4.45 4.45 4.45 5.22 5.22 5.22 5.22 6.06 4.45 4.45 5.22 5.22 5.22 5.22 5.17 5.17 5.17 5.17 6.06 6.06 6.06 6.06 5.17 6.06 6.06 6.06 6.06 6.06

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 95.1 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

10 3/4

11 3/4

11 7/8 13 3/8

13 1/2 13 5/8 16

40.50 45.50 51.00 55.50 60.70 65.70 73.20 79.20 47.00 54.00 60.00 65.00 71.00 71.80 54.50 61.00 68.00 72.00 77.00 80.70 85.00 86.00 81.40 88.20 95.00 96.00 109.00 118.00

0.350 0.400 0.450 0.495 0.545 0.595 0.672 0.734 0.375 0.435 0.489 0.534 0.582 0.582 0.380 0.430 0.480 0.514 0.550 0.580 0.608 0.625 0.580 0.625 0.566 0.575 0.656 0.715

10.050 9.950 9.850 9.760 9.660 9.560 9.406 9.282 11.000 10.880 10.772 10.682 10.586 10.711 12.615 12.515 12.415 12.347 12.275 12.215 12.159 12.125 12.340 12.375 14.868 14.850 14.688 14.570

Coupling

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift. . Interchangeable where bracketed. . When no value is shown for “Connection ID”, swaging is omitted and the ID is the pipe body ID. . 13 1/2" 81.4 lb/ft is interchangeable with the 13 3/8" 54.50–72.00 lb/ft profile. . Torque recommendation values available at www.tenaris.com/tenarishydril. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.

58

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Matched StRENgth 110 ksi

125 ksi

x 1000 lb

629 715 801 877 961 1044 1170 1270 737 850 951 1035 1123 1136 853 962 1069 1142 1219 1282 1341 1377 1232 1404 1509 1533 1739 1888

915 1040 1165 1276 1398 1519 1702 1848 1072 1237 1384 1505 1634 1652 1241 1399 1556 1661 1773 1865 1951 2003 1791 2042 2196 2229 2530 2747

1029 1171 1311 1435 1573 1708 1915 2079 1206 1392 1557 1693 1838 1858 1396 1574 1750 1869 1994 2098 2195 2253 2015 2297 2470 2508 2846 3090

1086 1236 1383 1515 1660 1803 2021 2194 1273 1469 1643 1788 1940 1962 1474 1661 1847 1973 2105 2215 2317 2378 2126 2425 2607 2647 3004 3262

Outside Diameter in

1258 1431 1602 1754 1922 2088 2340 2541 1474 1701 1903 2070 2246 2271 1706 1924 2139 2284 2438 2565 2682 2754 2463 2808 3019 3065 3478 3777

1429 1626 1820 1993 2184 2373 2660 2887 1675 1933 2162 2352 2552 2581 1939 2186 2431 2596 2770 2914 3048 3129 2799 3191 3430 3483 3953 4292

11.252 11.340 11.427 11.334 11.420 11.503 11.630 — 12.299 12.406 12.363 12.441 12.523 — 13.923 14.013 14.102 14.162 14.090 14.142 14.190 14.219 — 14.470 — — — —

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

TUBING CONNECTIONS

Wedge 563™ Tubing 2 3/8" to 7"

59

. Trouble-free make-up is developed with

1 1

. .

the rugged, coarse pitch thread and steep taper for deep stabbing. Roller-stenciled make-up confirmation band. Exceptional torque strength developed through the simultaneous engagement of opposing flanks of the double hooked dovetail thread.

. 100% internal pressure rated metal seal

2

.

2

3

.

maintains gas sealing capability under high axial loads. The shallow angle run out chamfer on the pin ID promotes uniform stress under the seal around the full circumference of the connection. Flow stream continuity maintained with the recess-free streamlined ID configuration.

. CB ring option

3

. 100% ratings in tension and features

. . 60

compression provided by the dovetail threads. 100% collapse rated thread seal created by full form contact of the dovetail threads, also providing a secondary internal pressure seal rated at pipe body. Wedge 563™ is interchangeable with Wedge 533™, Wedge 503™ and Wedge 553™.

. Production tubing and workstrings . Horizontal and extended reach wells . Thermal wells . Drilling with tubing . Tubing for internal coating (CB) . HP/HT and deep wells APPLICATIONS

. Matched strength . CB ring OPTIONS

Wedge 563™ - Tubing

Options

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

%

%

4.60 5.10 5.80 6.60 7.35 6.40 7.80 8.60 9.35 10.50 11.50 9.20 10.20 12.70 14.30 15.50 16.70 17.00 11.00 11.60 13.20 14.80 16.10 18.90 21.10 22.20 11.60 12.60 13.50 15.20 17.00 18.90 21.50 23.70 26.10 15.00 18.00 21.40 23.20 24.10 15.50 17.00 20.00 23.00 26.00 26.80 28.40 29.70 32.60

0.190 0.218 0.254 0.295 0.336 0.217 0.276 0.308 0.340 0.392 0.440 0.254 0.289 0.375 0.430 0.476 0.510 0.530 0.262 0.286 0.330 0.380 0.415 0.500 0.562 0.610 0.250 0.271 0.290 0.337 0.380 0.430 0.500 0.560 0.630 0.296 0.362 0.437 0.478 0.500 0.275 0.304 0.361 0.415 0.476 0.500 0.530 0.562 0.625

1.995 1.939 1.867 1.785 1.703 2.441 2.323 2.259 2.195 2.091 1.995 2.992 2.922 2.750 2.640 2.548 2.480 2.440 3.476 3.428 3.340 3.240 3.170 3.000 2.876 2.780 4.000 3.958 3.920 3.826 3.740 3.640 3.500 3.380 3.240 4.408 4.276 4.126 4.044 4.000 4.950 4.892 4.778 4.670 4.548 4.500 4.440 4.376 4.250

1.901 1.845 1.773 1.691 1.609 2.347 2.229 2.165 2.101 1.997 1.901 2.867 2.797 2.625 2.515 2.423 2.355 2.315 3.351 3.303 3.215 3.115 3.045 2.875 2.751 2.655 3.875 3.833 3.795 3.701 3.615 3.515 3.375 3.255 3.115 4.283 4.151 4.001 3.919 3.875 4.825 4.767 4.653 4.545 4.423 4.375 4.315 4.251 4.125

2.875 2.875 2.875 2.875 2.875 3.500 3.500 3.500 3.500 3.500 3.500 4.250 4.250 4.250 4.250 4.250 4.250 4.250 4.750 4.750 4.750 4.750 4.750 4.750 4.750 4.750 5.200 5.200 5.200 5.200 5.200 5.200 5.200 5.200 5.300 5.563 5.563 5.750 5.750 5.750 6.050 6.050 6.050 6.050 6.125 6.125 6.125 6.250 6.250

8.25 8.25 8.25 8.25 8.25 8.25 8.25 8.25 9.25 9.25 9.25 8.25 8.25 8.25 10.00 10.00 10.00 10.00 8.25 8.25 8.25 9.25 9.25 11.50 11.50 11.50 8.25 8.25 8.25 9.25 9.25 9.25 11.50 11.50 11.50 9.00 9.00 12.00 12.00 12.00 9.00 9.00 9.00 9.00 9.75 9.75 9.75 11.25 11.25

1.945 1.889 1.817 — — 2.391 2.273 — — — — 2.942 2.872 — — — — — 3.426 3.378 — — — — — — 3.950 3.908 3.870 — — — — — — 4.358 — 4.076 — — 4.900 4.842 — — 4.483 4.435 4.374 4.326 —

3.64 3.64 3.64 3.64 3.64 3.64 3.64 3.64 4.09 4.09 4.09 3.64 3.64 3.64 4.49 4.49 4.49 4.49 3.64 3.64 3.64 4.09 4.09 5.28 5.28 5.28 3.64 3.64 3.64 4.09 4.09 4.09 5.28 5.28 5.28 3.99 3.99 5.36 5.36 5.36 3.99 3.99 3.99 3.99 4.30 4.30 4.30 5.06 5.06

95.1 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 95.9 100 100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

2 3/8

2 7/8

TSH / PCC / Version 01 / March 2009

2 3/8" TO 5 1/2" (6 5/8" TO 7" on reverse side)

3 1/2

4

4 1/2

5

5 1/2

Coupling

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Matched StRENgth 110 ksi

125 ksi

x 1000 lb

68 81 93 106 118 100 124 137 149 168 185 142 160 202 228 249 263 272 169 184 209 238 257 302 334 357 184 198 211 242 271 302 346 381 421 241 290 331 373 389 248 273 321 365 413 432 455 480 526

99 118 135 154 172 145 180 199 217 245 269 207 233 295 332 362 383 396 246 267 304 346 374 440 486 520 267 288 307 353 393 440 503 555 613 350 422 480 543 565 361 397 466 530 601 628 662 697 766

111 133 152 173 194 163 203 224 244 275 303 233 262 331 373 407 431 445 277 300 342 389 421 495 546 585 300 324 345 397 443 495 565 624 689 394 475 541 611 636 406 447 525 597 676 707 745 785 861

Outside Diameter in

118 140 161 183 204 172 214 236 257 290 320 246 277 350 394 430 455 470 292 317 361 411 444 522 577 617 317 342 364 419 467 522 597 659 728 416 501 571 645 672 429 471 554 630 714 746 786 828 909

136 162 186 212 237 199 248 273 298 336 370 285 321 405 456 497 527 544 338 367 419 475 514 605 668 715 367 396 422 485 541 605 691 762 843 481 580 661 747 778 497 546 641 729 826 864 910 959 1053

155 185 212 241 269 227 282 310 338 382 421 324 364 460 518 565 599 618 385 417 476 540 584 687 759 812 417 450 479 551 615 687 785 866 957 547 659 751 849 884 564 620 729 829 939 982 1034 1090 1197

2.657 2.685 2.737 2.793 — 3.192 3.282 3.328 3.337 3.405 3.464 3.886 3.941 4.067 4.100 4.160 4.202 — 4.406 4.444 4.513 4.549 4.599 4.598 4.679 — 4.891 4.926 4.958 4.992 5.058 5.133 5.114 — — 5.404 — 5.511 5.571 5.603 5.873 5.921 — — 6.057 — — 6.085 6.174

. Interchangeable where bracketed. . When no value is shown for “Wedge ID”, swaging is omitted and the ID is the pipe body ID. . Torque recommendation values available at www.tenaris.com/tenarishydril. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.

61

Wedge 563™ - Tubing

Options

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

%

%

24.00 28.00 32.00 23.00 26.00 29.00 32.00 35.00 38.00 41.00 42.70

0.352 0.417 0.475 0.317 0.362 0.408 0.453 0.498 0.540 0.590 0.625

5.921 5.791 5.675 6.366 6.276 6.184 6.094 6.004 5.920 5.820 5.750

5.796 5.666 5.550 6.250 6.151 6.059 6.000 5.879 5.795 5.695 5.625

9.25 9.25 9.25 9.25 9.25 9.25 9.25 11.25 11.25 11.25 11.25

5.871 — — 6.316 6.226 — — 5.954 5.870 — —

4.05 4.05 4.05 4.05 4.05 4.05 4.05 5.06 5.06 5.06 5.06

100 100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

6 5/8

7

6 5/8" TO 7" Coupling

7.390 7.390 7.390 7.656 7.656 7.656 7.656 7.750 7.750 7.750 7.750

. Interchangeable where bracketed. . When no value is shown for “Wedge ID“, swaging is omitted and the ID is the pipe body ID. . Torque recommendation values available at www.tenaris.com/tenarishydril. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.

62

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Matched StRENgth 110 ksi

125 ksi

x 1000 lb

382 447 505 366 415 465 512 559 603 653 688

555 651 734 532 604 676 745 814 877 950 1001

624 732 826 599 679 760 839 916 986 1069 1127

659 773 872 632 717 803 885 966 1041 1129 1189

Outside Diameter in

763 895 1010 732 830 929 1025 1119 1206 1307 1377

867 1017 1147 832 944 1056 1165 1272 1370 1485 1565

7.121 7.227 — 7.449 7.525 — — 7.557 7.623 — —

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING CONNECTIONS

Wedge 523™ 7" to 16"

63

. Clearance OD 1.5–2% of specified

1

pipe body OD (0.5–1% larger than API maximum) for clearance situations.

1

. Exceptional torque strength developed

2

through the simultaneous engagement of opposing flanks of the dovetail thread.

2

. 100% internal pressure rated metal seal

3

.

maintains gas sealing capability under high axial loads. Patented seal saver protects pin seal from handling damage and acts as a stiffener to improve metal seal functioning.

3

. 100% collapse rated thread seal created . Surface casing . Intermediate casing by full form contact of the dovetail . Production casing and tie-backs threads, also providing a secondary internal pressure seal rated at pipe body. . Drilling with casing . High compression rating provided by the . Liners . Horizontal and extended reach wells reverse angle stab flank of the threads . HP/HT and deep wells makes the Wedge 523™ suitable featureS

. 64

for the more severe compression applications. Compression strength exceeds tension strength. Wedge 523™ is interchangeable with Wedge 513™.

APPLICATIONS

Wedge 523™

7" TO 16" Pipe Body

Designation Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

in

7

TSH / PCC / Version 01 / March 2009

7 5/8

7 3/4 8 5/8 9 5/8

9 7/8 10 10 3/4

11 3/4 11 7/8 12 3/4 13 3/8 13 5/8 14

16

29.00 32.00 35.00 38.00 29.70 33.70 39.00 42.80 45.30 46.10 40.00 47.00 53.50 58.40 62.80 65.10 68.42 68.80 55.50 60.70 65.70 60.00 65.00 71.80 88.00 68.00 72.00 88.20 99.60 104.20 112.60 113.00 95.00 96.00 102.90 109.00

0.408 0.453 0.498 0.540 0.375 0.430 0.500 0.562 0.595 0.595 0.450 0.472 0.545 0.595 0.625 0.650 0.688 0.700 0.495 0.545 0.595 0.489 0.534 0.582 0.672 0.480 0.514 0.625 0.700 0.734 0.797 0.800 0.566 0.575 0.625 0.656

6.184 6.094 6.004 5.920 6.875 6.765 6.625 6.501 6.435 6.560 7.725 8.681 8.535 8.435 8.625 8.575 8.624 8.600 9.760 9.660 9.560 10.772 10.682 10.711 11.406 12.415 12.347 12.375 12.600 12.532 12.406 12.400 14.868 14.850 14.750 14.688

6.059 5.969* 5.879 5.795 6.750 6.640 6.500 6.376 6.310 6.435* 7.600* 8.525 8.379* 8.279 8.469* 8.419* 8.468* 8.500 9.604* 9.504 9.404* 10.616* 10.526* 10.555* 11.250 12.259 12.191* 12.187* 12.413 12.345 12.218* 12.212* 14.750 14.750 14.562 14.500*

BOX Outside Diameter

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

in

in

sq in

%

%

71.5 73.0 73.1 74.3 70.5 72.6 74.4 72.8 74.1 71.9 71.2 74.8 73.7 76.0 74.1 71.4 66.9 65.9 70.3 70.8 72.7 71.0 71.4 70.9 74.6 69.2 71.5 71.5 70.3 71.4 73.9 73.8 70.6 71.2 73.9 72.2

82.6 84.2 83.1 86.4 82.3 82.7 82.9 81.8 82.6 80.5 80.6 84.0 82.8 84.3 82.1 79.2 74.1 72.9 78.8 83.4 80.7 83.2 79.0 80.9 82.2 81.9 82.3 83.4 77.2 78.0 82.9 82.7 82.5 81.4 82.6 79.5

7.129 7.153 7.168 7.182 7.752 7.775 7.787 7.787 7.811 7.937 8.773 9.784 9.834 9.830 10.087 10.087 10.150 10.175 10.922 10.931 10.966 11.928 11.965 12.072 13.000 13.564 13.602 13.875 14.234 14.241 14.253 14.253 16.224 16.226 16.235 16.241

6.093 6.034 5.913 5.829 6.800 6.675 6.535 6.411 6.345 6.535 7.665 8.566 8.541 8.320 8.541 8.541 8.541 8.541 9.665 9.546 9.542 10.666 10.666 10.665 11.291 12.303 12.294 12.295 12.456 12.388 12.293 12.293 14.793 14.793 14.605 14.643

4.07 4.70 4.65 5.46 4.42 4.06 4.69 5.51 5.51 5.49 4.73 4.75 5.56 5.56 5.56 5.56 5.56 5.56 4.75 5.56 5.56 4.79 4.79 5.87 5.69 4.94 4.94 6.44 5.79 5.79 6.62 6.62 6.02 6.02 5.86 5.86

6.041 6.811 7.558 8.143 6.021 7.057 8.327 9.078 9.737 9.616 8.229 9.948 11.457 12.828 13.458 13.458 13.465 13.478 11.211 12.371 13.800 12.283 13.435 14.660 19.022 13.456 14.849 18.250 20.561 21.841 24.430 24.483 19.375 19.839 22.310 22.831

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

574 647 718 774 572 670 791 862 925 914 782 945 1088 1219 1279 1279 1279 1280 1065 1175 1311 1167 1276 1393 1807 1278 1411 1734 1953 2075 2321 2326 1841 1885 2119 2169

665 749 831 896 662 776 916 999 1071 1058 905 1094 1260 1411 1480 1480 1481 1483 1233 1361 1518 1351 1478 1613 2092 1480 1633 2008 2262 2403 2687 2693 2131 2182 2454 2511

755 851 945 1018 753 882 1041 1135 1217 1202 1029 1244 1432 1604 1682 1682 1683 1685 1401 1546 1725 1535 1679 1833 2378 1682 1856 2281 2570 2730 3054 3060 2422 2480 2789 2854

x 1000 lb

332 375 416 448 331 388 458 499 536 529 453 547 630 706 740 740 741 741 617 680 759 676 739 806 1046 740 817 1004 1131 1201 1344 1347 1066 1091 1227 1256

483 545 605 651 482 565 666 726 779 769 658 796 917 1026 1077 1077 1077 1078 897 990 1104 983 1075 1173 1522 1076 1188 1460 1645 1747 1954 1959 1550 1587 1785 1826

544 613 680 733 542 635 749 817 876 865 741 895 1031 1155 1211 1211 1212 1213 1009 1113 1242 1105 1209 1319 1712 1211 1336 1643 1850 1966 2199 2203 1744 1786 2008 2055

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift. . Interchangeable where bracketed. . Torque recommendation values available at www.tenaris.com/tenarishydril.

65

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING CONNECTIONS

Wedge 521™ 4" to 18 5/8"

67

1

. Roller-stenciled make-up confirmation band.

2

. Exceptional torque strength developed

1

through the simultaneous engagement of opposing flanks of the dovetail thread, permitting washing and drilling operations.

2

. Rugged nose to improve stabbing

3

resistance.

3

. 100% pipe body internal yield and featureS

.

. 68

collapse strength created with the lubricant seal of the dovetail threads. High compression rating provided by the reverse angle stab flank of the dovetail threads makes the Wedge 521™ suitable for the more severe compression applications. Compression rating is typically 80–89% of the pipe body, and is usually higher than the tension rating. Excellent for large diameter pipe, the dovetail thread eliminates thread pull-out, even on thin wall pipe.

. Surface casing . Intermediate casing . Drilling with casing . Liners . Horizontal and extended reach wells . Thermal wells . HP/HT and deep wells APPLICATIONS

Wedge 521™

4" TO 15" (16" TO 18 5/8" on reverse side)

Designation Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

in

9.50 11.00 11.60 10.50 11.00 11.60 12.60 13.50 13.00 15.00 18.00 14.00 15.50 17.00 20.00 20.00 24.00 28.00 20.00 23.00 26.00 29.00 32.00 26.40 29.70 33.70 32.00 36.00 40.00 36.00 40.00 43.50 47.00 40.50 45.50 51.00 55.50 60.70 65.70 47.00 54.00 60.00 65.00 54.50 61.00 68.00 72.00 77.00 81.40 88.20 77.50

0.226 0.262 0.286 0.224 0.237 0.250 0.271 0.290 0.253 0.296 0.362 0.244 0.275 0.304 0.361 0.288 0.352 0.417 0.272 0.317 0.362 0.408 0.453 0.328 0.375 0.430 0.352 0.400 0.450 0.352 0.395 0.435 0.472 0.350 0.400 0.450 0.495 0.545 0.595 0.375 0.435 0.489 0.534 0.380 0.430 0.480 0.514 0.550 0.580 0.625 0.500

4

4 1/2

5 TSH / PCC / Version 01 / March 2009

Pipe Body

Size

5 1/2

6 5/8

7

7 5/8

8 5/8

9 5/8

10 3/4

11 3/4

13 3/8

13 1/2 13 5/8 15

3.548 3.476 3.428 4.052 4.026 4.000 3.958 3.920 4.494 4.408 4.276 5.012 4.950 4.892 4.778 6.049 5.921 5.791 6.456 6.366 6.276 6.184 6.094 6.969 6.875 6.765 7.921 7.825 7.725 8.921 8.835 8.755 8.681 10.050 9.950 9.850 9.760 9.660 9.560 11.000 10.880 10.772 10.682 12.615 12.515 12.415 12.347 12.275 12.340 12.375 14.000

3.423 3.351 3.303 3.927 3.901 3.875 3.833 3.795 4.369 4.283 4.151 4.887 4.825 4.767 4.653 5.924 5.796 5.666 6.331 6.241* 6.151 6.059 5.969* 6.844 6.750 6.640 7.796* 7.700 7.600* 8.765 8.679* 8.599 8.525 9.894 9.794* 9.694 9.604* 9.504 9.404* 10.844 10.724 10.616* 10.526* 12.459 12.359 12.259 12.191* 12.119 12.152* 12.187* 13.812

BOX Outside Diameter

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

in

in

sq in

%

%

61.4 65.9 68.4 60.5 62.3 64.1 66.5 68.2 64.4 68.9 73.8 63.3 66.9 69.6 73.8 65.5 71.0 74.7 63.1 67.7 71.2 73.9 76.1 67.7 71.2 74.3 68.1 71.4 74.2 66.7 70.0 72.3 74.1 63.2 66.5 70.4 71.9 74.0 75.7 64.0 68.5 70.6 70.1 61.0 65.0 68.2 70.0 70.3 71.3 73.3 66.0

83.6 85.9 86.9 82.6 83.6 84.8 86.0 86.7 84.4 86.8 88.7 83.5 85.7 87.0 88.7 86.0 88.3 89.5 84.4 86.8 88.0 89.0 89.7 85.8 87.5 88.6 83.9 86.7 87.8 83.7 85.4 86.4 87.1 78.1 78.9 82.1 84.5 85.6 85.3 78.3 80.7 82.5 80.8 81.9 83.8 85.1 85.8 85.7 87.3 86.9 78.0

4.103 4.162 4.200 4.651 4.673 4.695 4.729 4.759 5.185 5.255 5.359 5.660 5.713 5.761 5.852 6.818 6.925 7.029 7.148 7.225 7.300 7.375 7.447 7.868 7.947 8.037 8.889 8.970 9.053 9.883 9.957 10.025 10.087 10.863 10.950 11.037 11.010 11.094 11.177 11.892 11.998 11.928 11.965 13.531 13.620 13.707 13.766 13.686 13.940 13.940 15.149

3.457 3.401 3.353 3.976 3.976 3.960 3.918 3.880 4.444 4.358 4.226 4.947 4.900 4.842 4.728 5.999 5.871 5.741 6.381 6.291 6.201 6.109 6.050 6.894 6.800 6.690 7.924 7.750 7.674 8.846 8.799 8.680 8.606 9.975 9.926 9.775 9.685 9.585 9.551 10.925 10.805 10.687 10.676 12.540 12.440 12.340 12.317 12.200 12.315 12.305 13.875

3.62 3.62 3.62 3.62 3.62 3.62 3.62 3.62 3.62 3.62 3.62 3.62 3.62 3.62 3.62 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 4.14 4.14 4.14 4.97 4.97 4.97 4.14 4.14 4.97 4.97 4.65 4.65 4.65 4.65 5.60 5.60 5.60 4.65

1.646 2.029 2.284 1.821 1.977 2.141 2.393 2.617 2.431 3.014 3.891 2.552 3.022 3.453 4.300 3.755 4.924 6.079 3.629 4.507 5.373 6.248 7.086 5.088 6.080 7.220 6.234 7.384 8.572 6.841 8.012 9.083 10.052 7.231 8.651 10.247 11.463 12.937 14.370 8.577 10.586 12.205 13.198 9.461 11.362 13.254 14.537 15.587 16.793 18.708 15.041

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

156 193 217 173 188 203 227 249 231 286 370 242 287 328 409 357 468 578 345 428 510 594 673 483 578 686 592 701 814 650 761 863 955 687 822 973 1089 1229 1365 815 1006 1159 1254 899 1079 1259 1381 1481 1595 1777 1429

181 223 251 200 217 236 263 288 267 332 428 281 332 380 473 413 542 669 399 496 591 687 779 560 669 794 686 812 943 753 881 999 1106 795 952 1127 1261 1423 1581 943 1164 1343 1452 1041 1250 1458 1599 1715 1847 2058 1655

206 254 286 228 247 268 299 327 304 377 486 319 378 432 538 469 616 760 454 563 672 781 886 636 760 903 779 923 1072 855 1002 1135 1257 904 1081 1281 1433 1617 1796 1072 1323 1526 1650 1183 1420 1657 1817 1948 2099 2339 1880

x 1000 lb

91 112 126 100 109 118 132 144 134 166 214 140 166 190 237 207 271 334 200 248 296 344 390 280 334 397 343 406 471 376 441 500 553 398 476 564 630 712 790 472 582 671 726 520 625 729 800 857 924 1029 827

132 162 183 146 158 171 191 209 194 241 311 204 242 276 344 300 394 486 290 361 430 500 567 407 486 578 499 591 686 547 641 727 804 578 692 820 917 1035 1150 686 847 976 1056 757 909 1060 1163 1247 1343 1497 1203

148 183 206 164 178 193 215 236 219 271 350 230 272 311 387 338 443 547 327 406 484 562 638 458 547 650 561 665 771 616 721 817 905 651 779 922 1032 1164 1293 772 953 1098 1188 851 1023 1193 1308 1403 1511 1684 1354

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift. . Interchangeable where bracketed. . Torque recommendation values available at www.tenaris.com/tenarishydril.

69

Wedge 521™

16" TO 18 5/8"

Designation

Pipe Body

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

in

16

16 1/8 17 17 7/8

18 18 5/8

75.00 84.00 95.00 96.00 109.00 118.00 95.60 77.50 88.10 93.50 105.00 121.00 94.00 105.00 87.50 94.50 100.00 101.00 109.35 112.00

0.438 0.495 0.566 0.575 0.656 0.715 0.566 0.438 0.500 0.500 0.562 0.650 0.500 0.562 0.435 0.460 0.500 0.510 0.563 0.579

15.124 15.010 14.868 14.850 14.688 14.570 14.993 16.124 16.000 16.875 16.751 16.575 17.000 16.876 17.755 17.705 17.625 17.605 17.499 17.467

14.936 14.822 14.750 14.750 14.500 14.382 14.805 15.936 * 15.812 16.687 16.563 16.500 * 16.812 16.688 17.567 17.517 17.500 17.500 17.311 17.279

BOX Outside Diameter

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

in

in

sq in

%

%

4.65 4.65 4.65 4.65 5.60 5.60 4.65 4.65 4.65 4.65 5.60 5.60 4.65 4.65 4.65 4.65 4.65 4.65 5.60 5.60

14.058 16.644 19.876 20.296 23.487 26.116 19.645 14.950 17.967 17.254 19.942 22.815 17.699 20.978 16.223 17.580 19.709 20.243 22.588 23.445

65.6 69.0 72.4 72.8 74.3 76.1 71.0 65.6 69.3 63.2 65.2 64.9 64.4 68.1 65.3 67.0 69.2 69.7 70.7 71.4

80.3 82.2 84.0 84.1 88.4 89.1 81.5 80.7 82.6 79.3 77.4 75.5 75.4 78.0 83.1 84.0 85.4 85.7 86.9 87.3

16.155 16.257 16.397 16.397 16.465 16.566 16.427 17.197 17.308 18.000 18.000 18.020 18.060 18.135 18.854 18.899 18.971 18.989 18.948 18.976

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift. . Interchangeable where bracketed. . 16 1/8" 95.60 lb/ft is interchangeable with 16" 75.00–96.00 lb/ft. . 17 7/8" 93.50 lb/ft is interchangeable with 18" 94.00–105.00 lb/ft. . 17 7/8" 105.00 lb/ft and 17 7/8" 121.00 lb/ft are interchangeable with 18" 117.00 lb/ft Wedge 511 . Torque recommendation values available at www.tenaris.com/tenarishydril.

70

15.049 14.935 14.809 14.809 14.613 14.495 14.864 16.067 15.925 16.843 16.628 16.565 16.883 16.759 17.638 17.588 17.571 17.571 17.387 17.355

™ and 18" 128.00 lb/ft Wedge 511™.

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

1336 1581 1888 1928 2231 2481 1866 1420 1707 1639 1894 2167 1681 1993 1541 1670 1872 1923 2146 2227

1546 1831 2186 2233 2584 2873 2161 1645 1976 1898 2194 2510 1947 2308 1785 1934 2168 2227 2485 2579

1757 2081 2485 2537 2936 3265 2456 1869 2246 2157 2493 2852 2212 2622 2028 2198 2464 2530 2824 2931

x 1000 lb

773 915 1093 1116 1292 1436 1080 822 988 949 1097 1255 973 1154 892 967 1084 1113 1242 1289

1125 1332 1590 1624 1879 2089 1572 1196 1437 1380 1595 1825 1416 1678 1298 1406 1577 1619 1807 1876

1265 1498 1789 1827 2114 2350 1768 1346 1617 1553 1795 2053 1593 1888 1460 1582 1774 1822 2033 2110

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING CONNECTIONS

Wedge 513™ 4 1/2" to 16"

71

. Flush OD connection facilitates running

1 1

and circulating and eliminates down hole coupling face hang-up. Boxes machined onto as-received pipe ends.

. Exceptional torque strength developed

2

through the simultaneous engagement of opposing flanks of the dovetail thread, permitting washing and drilling operations.

2

. 100% internal pressure rated metal seal

3

.

maintains gas sealing capability under high axial loads. The shallow angle run out chamfer on the pin ID promotes uniform stress under the seal around the full circumference.

3

. High compression rating provided by the . Surface casing . Production casing and tie-backs reverse angle stab flank of the dovetail threads makes the Wedge 513™ suitable . Drilling with casing . Liners for all liner applications. Compression . Horizontal and extended reach wells strength exceeds tension strength. . Wedge 513™ is interchangeable with . HP/HT and deep wells featureS

Wedge 523™.

72

Applications

Wedge 513™

4 1/2" TO 16" Pipe Body

Designation Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

in

4 1/2

TSH / PCC / Version 01 / March 2009

5

5 1/2

7

7 5/8

7 3/4 8 5/8 9 3/8 9 5/8

9 7/8 10 10 3/4

11 3/4 11 7/8 12 3/4 13 3/8 13 5/8 14

16

11.60 12.60 13.50 15.10 16.60 17.00 18.80 21.50 15.00 18.00 21.40 23.20 24.10 26.70 17.00 20.00 23.00 26.00 26.00 29.00 32.00 35.00 38.00 29.70 33.70 39.00 42.80 45.30 46.10 40.00 39.00 47.00 53.50 58.40 62.80 65.10 68.42 68.80 55.50 60.70 65.70 60.00 65.00 71.80 88.00 68.00 72.00 88.20 99.60 104.20 112.60 113.00 95.00 96.00 102.90 109.00

0.250 0.271 0.290 0.337 0.375 0.380 0.430 0.500 0.296 0.362 0.437 0.478 0.500 0.562 0.304 0.361 0.415 0.476 0.362 0.408 0.453 0.498 0.540 0.375 0.430 0.500 0.562 0.595 0.595 0.450 0.400 0.472 0.545 0.595 0.625 0.650 0.688 0.700 0.495 0.545 0.595 0.489 0.534 0.582 0.672 0.480 0.514 0.625 0.700 0.734 0.797 0.800 0.566 0.575 0.625 0.656

4.000 3.958 3.920 3.826 3.750 3.740 3.640 3.500 4.408 4.276 4.126 4.044 4.000 3.876 4.892 4.778 4.670 4.548 6.276 6.184 6.094 6.004 5.920 6.875 6.765 6.625 6.501 6.435 6.560 7.725 8.575 8.681 8.535 8.435 8.625 8.575 8.624 8.600 9.760 9.660 9.560 10.772 10.682 10.711 11.406 12.415 12.347 12.375 12.600 12.532 12.406 12.400 14.868 14.850 14.750 14.688

3.875 3.833 3.795 3.701 3.625 3.615 3.515 3.375 4.283 4.151 4.001 3.919 3.875 3.751 4.767 4.653 4.545 4.423* 6.151 6.059 5.969* 5.879 5.795 6.750 6.640 6.500 6.376 6.310 6.435* 7.600* 8.419* 8.525 8.379* 8.279 8.469* 8.419* 8.468* 8.500 9.604* 9.504 9.404* 10.616* 10.526* 10.555* 11.250* 12.259 12.191* 12.187* 12.413 12.345 12.218* 12.212* 14.680 14.662 14.562 14.500*

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

in

sq in

%

%

61.9 62.8 59.7 63.1 64.7 64.6 62.9 62.9 60.1 63.7 62.5 62.6 61.8 64.2 62.8 63.8 63.5 63.5 62.4 61.5 63.7 61.8 62.9 60.0 59.8 62.0 65.5 62.1 60.8 58.9 58.9 61.7 60.5 62.9 62.6 60.4 63.7 62.7 60.9 66.4 61.1 65.7 60.4 61.8 62.7 63.5 62.1 60.1 66.0 63.1 62.6 64.3 63.6 62.6 62.8 62.6

71.2 71.7 72.6 74.1 76.6 76.6 73.5 72.0 72.4 73.7 72.8 71.7 70.7 72.1 74.4 73.9 74.1 72.8 72.3 75.8 76.7 73.6 75.4 75.2 73.4 73.8 77.4 73.4 72.2 73.2 73.2 74.3 72.9 74.3 73.4 70.8 73.5 72.3 73.2 79.0 72.7 78.1 71.8 74.5 73.0 75.9 73.7 74.5 75.8 72.5 74.1 75.8 76.7 75.5 73.9 73.2

3.918 3.876 3.838 3.744 3.668 3.658 3.558 3.418 4.327 4.194 4.045 3.963 3.919 3.795 4.813 4.698 4.590 4.468 6.199 6.093 6.034 5.913 5.829 6.800 6.675 6.535 6.411 6.345 6.535 7.665 8.540 8.566 8.541 8.320 8.541 8.541 8.541 8.541 9.665 9.546 9.542 10.666 10.666 10.665 11.291 12.303 12.294 12.295 12.456 12.388 12.293 12.293 14.793 14.793 14.605 14.643

3.43 3.43 3.73 4.30 4.37 4.37 4.37 4.00 3.75 4.32 4.39 4.02 4.02 4.66 3.78 4.35 4.42 4.05 4.36 4.07 4.70 4.65 5.46 4.42 4.06 4.69 5.51 5.51 5.49 4.73 4.47 4.75 5.56 5.56 5.56 5.56 5.56 5.56 4.75 5.56 5.56 4.79 4.79 5.87 5.69 4.94 4.94 6.44 5.79 5.79 6.62 6.62 6.02 6.02 5.86 5.86

2.066 2.261 2.290 2.781 3.144 3.177 3.458 3.952 2.629 3.360 3.915 4.251 4.369 5.031 3.116 3.718 4.210 4.771 4.711 5.196 5.935 6.286 6.893 5.125 5.813 6.939 8.168 8.161 8.131 7.154 6.643 8.374 9.405 10.617 11.369 11.369 12.821 12.823 9.712 11.602 11.598 11.366 11.365 12.760 15.987 12.348 12.897 15.341 19.304 19.302 20.694 21.332 17.454 17.443 18.959 19.795

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

196 215 218 264 299 302 329 375 250 319 372 404 415 478 296 353 400 453 448 494 564 597 655 487 552 659 776 775 772 680 631 796 893 1009 1080 1080 1218 1218 923 1102 1102 1080 1080 1212 1519 1173 1225 1457 1834 1834 1966 2027 1658 1657 1801 1881

227 249 252 306 346 349 380 435 289 370 431 468 481 553 343 409 463 525 518 572 653 691 758 564 639 763 898 898 894 787 731 921 1035 1168 1251 1251 1410 1411 1068 1276 1276 1250 1250 1404 1759 1358 1419 1688 2123 2123 2276 2347 1920 1919 2085 2177

258 283 286 348 393 397 432 494 329 420 489 531 546 629 390 465 526 596 589 650 742 786 862 641 727 867 1021 1020 1016 894 830 1047 1176 1327 1421 1421 1603 1603 1214 1450 1450 1421 1421 1595 1998 1544 1612 1918 2413 2413 2587 2667 2182 2180 2370 2474

x 1000 lb

114 124 126 153 173 175 190 217 145 185 215 234 240 277 171 204 232 262 259 286 326 346 379 282 320 382 449 449 447 393 365 461 517 584 625 625 705 705 534 638 638 625 625 702 879 679 709 844 1062 1062 1138 1173 960 959 1043 1089

165 181 183 222 252 254 277 316 210 269 313 340 350 402 249 297 337 382 377 416 475 503 551 410 465 555 653 653 650 572 531 670 752 849 910 910 1026 1026 777 928 928 909 909 1021 1279 988 1032 1227 1544 1544 1656 1707 1396 1395 1517 1584

186 203 206 250 283 286 311 356 237 302 352 383 393 453 280 335 379 429 424 468 534 566 620 461 523 625 735 734 732 644 598 754 846 956 1023 1023 1154 1154 874 1044 1044 1023 1023 1148 1439 1111 1161 1381 1737 1737 1862 1920 1571 1570 1706 1782

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift. . Interchangeable where bracketed. . Torque recommendation values available at www.tenaris.com/tenarishydril. 73

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING CONNECTIONS

Wedge 511™ 2 1/16" to 18 5/8"

75

. Flush OD connection facilitates running

1

and circulating and eliminates down hole coupling face hang-up.

1

. Exceptional torque strength developed

2

through the simultaneous engagement of opposing flanks of the dovetail thread, permitting rotating and wash over in deviated holes without fear of structural failure.

2

. Stabbing resistance of the pin end face

3

is maintained with the swaged, stress relieved and machined ID to receive a standard drift.

3

. High compression rating provided by the . Surface casing . Drilling with casing reverse angle stab flank of the dovetail threads makes the Wedge 511™ suitable . Liners . Horizontal and extended reach wells for use as slotted liners in geothermal and steam injection service. Compression . Thermal wells . HP/HT and deep wells strength exceeds tension strength. . 100% pipe body collapse strength featureS

created with the lubricant seal of the dovetail threads.

76

APPLICATIONS

Wedge 511™

2 1/16" TO 10 3/4" (11 3/4" TO 18 5/8" on reverse side) Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

in

in

sq in

%

%

1.657 1.519 1.901 1.845 2.347 2.943 2.867 2.797 3.423 3.351 3.303 3.927 3.901 3.875 3.833 3.795 3.701 4.283 4.151 4.825 4.767 4.653 5.001 4.875 4.785 5.227 5.115 5.796 5.666 6.241 * 6.151 6.059 6.844 6.750 6.640 7.125 7.250 7.160 7.060 7.796 * 7.700 7.600 * 8.025 8.679 * 8.599 * 8.525 9.794 * 9.694 9.604 * 9.504 9.404 *

1.686 1.548 1.930 1.887 2.377 2.973 2.897 2.827 3.454 3.382 3.334 3.959 3.934 3.908 3.865 3.827 3.733 4.317 4.185 4.860 4.802 4.688 5.036 4.910 4.820 5.263 5.151 5.832 5.702 6.286 6.187 6.095 6.881 6.787 6.677 7.168 7.293 7.203 7.103 7.918 7.743 7.668 8.069 8.794 8.669 8.569 9.922 9.741 9.672 9.551 9.547

2.27 2.27 2.27 2.27 2.27 2.74 2.74 2.74 2.74 2.74 2.74 2.74 2.74 2.74 2.67 2.67 3.04 2.67 3.62 2.67 2.67 3.24 2.67 3.70 3.70 3.04 3.10 3.62 3.70 3.04 3.70 3.69 3.04 3.70 4.14 3.70 3.70 3.69 4.14 3.24 3.69 4.14 3.69 3.70 3.69 4.14 3.70 4.14 4.14 4.97 4.97

60.3 60.7 59.9 60.9 55.0 55.1 60.9 60.4 61.8 61.8 61.0 63.2 64.8 63.2 58.2 60.6 61.2 60.7 62.8 60.4 60.9 62.4 60.0 61.4 59.7 60.8 60.0 63.3 59.9 60.8 60.9 60.6 61.6 61.1 60.1 61.5 61.1 61.0 59.6 57.3 61.4 58.6 62.2 59.6 62.5 61.2 59.0 62.9 60.4 64.4 59.6

81.6 73.6 75.0 75.0 67.8 67.9 72.0 72.3 74.0 75.0 78.6 75.3 76.2 77.1 73.7 75.2 73.7 74.9 74.5 75.5 74.6 74.0 73.3 74.4 71.4 73.5 73.1 75.0 71.5 73.7 74.2 72.8 74.0 73.8 73.1 74.1 73.7 72.5 71.4 68.8 73.6 70.9 73.5 71.4 73.6 72.8 70.6 74.9 71.3 75.6 69.9

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

0.156 0.225 0.190 0.218 0.217 0.216 0.254 0.289 0.226 0.262 0.286 0.224 0.237 0.250 0.271 0.290 0.337 0.296 0.362 0.275 0.304 0.361 0.312 0.375 0.420 0.324 0.380 0.352 0.417 0.317 0.362 0.408 0.328 0.375 0.430 0.375 0.375 0.420 0.470 0.352 0.400 0.450 0.425 0.395 0.435 0.472 0.400 0.450 0.495 0.545 0.595

1.751 1.613 1.995 1.939 2.441 3.068 2.992 2.922 3.548 3.476 3.428 4.052 4.026 4.000 3.958 3.920 3.826 4.408 4.276 4.950 4.892 4.778 5.126 5.000 4.910 5.352 5.240 5.921 5.791 6.366 6.276 6.184 6.969 6.875 6.765 7.250 7.375 7.285 7.185 7.921 7.825 7.725 8.150 8.835 8.755 8.681 9.950 9.850 9.760 9.660 9.560

2 1/16 2 3/8 2 7/8 3 1/2

4 TSH / PCC / Version 01 / March 2009

Connection Inside Diameter

Pipe Body

Designation Size

4 1/2

5 5 1/2

5 3/4

6 6 5/8 7

7 5/8

8 8 1/8

8 5/8

9 9 5/8

10 3/4

3.25 (1) 4.50 (1) 4.60 (2) 5.10 (2) 6.40 7.70 9.20 10.20 9.50 11.00 11.60 (2) 10.50 11.00 11.60 12.60 13.50 15.10 15.00 18.00 15.50 17.00 20.00 18.00 21.80 24.20 20.00 23.00 24.00 28.00 23.00 26.00 29.00 26.40 29.70 33.70 31.00 32.50 35.50 39.50 32.00 36.00 40.00 40.00 40.00 43.50 47.00 45.50 51.00 55.50 60.70 65.70

0.564 0.788 0.781 0.899 0.996 1.227 1.578 1.760 1.657 1.902 2.035 1.902 2.058 2.111 2.096 2.326 2.696 2.654 3.311 2.727 3.021 3.636 3.196 3.885 4.202 3.515 4.026 4.393 4.871 4.045 4.595 5.124 4.633 5.218 5.841 5.525 5.581 6.199 6.741 5.242 6.348 6.777 7.120 6.824 7.849 8.306 7.671 9.159 9.629 11.258 11.318

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

54 75 74 85 95 117 150 167 157 181 193 181 196 201 199 221 256 252 315 259 287 345 304 369 399 334 382 417 463 384 437 487 440 496 555 525 530 589 640 498 603 644 676 648 746 789 729 870 915 1070 1075

62 87 86 99 110 135 174 194 182 209 224 209 226 232 231 256 297 292 364 300 332 400 352 427 462 387 443 483 536 445 505 564 510 574 643 608 614 682 742 577 698 745 783 751 863 914 844 1007 1059 1238 1245

71 99 98 112 125 153 197 220 207 238 254 238 257 264 262 291 337 332 414 341 378 455 400 486 525 439 503 549 609 506 574 641 579 652 730 691 698 775 843 655 794 847 890 853 981 1038 959 1145 1204 1407 1415

x 1000 lb

31 43 43 49 55 67 87 97 91 105 112 105 113 116 115 128 148 146 182 150 166 200 176 214 231 193 221 242 268 222 253 282 255 287 321 304 307 341 371 288 349 373 392 375 432 457 422 504 530 619 622

45 63 62 72 80 98 126 141 133 152 163 152 165 169 168 186 216 212 265 218 242 291 256 311 336 281 322 351 390 324 368 410 371 417 467 442 446 496 539 419 508 542 570 546 628 664 614 733 770 901 905

51 71 70 81 90 110 142 158 149 171 183 171 185 190 189 209 243 239 298 245 272 327 288 350 378 316 362 395 438 364 414 461 417 470 526 497 502 558 607 472 571 610 641 614 706 748 690 824 867 1013 1019

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift. . Interchangeable where bracketed. . This weight has a box OD 0.063" larger than nominal pipe OD. . This weight has a box OD 0.031" larger than nominal pipe OD. . Torque recommendation values available at www.tenaris.com/tenarishydril. (1) (2)

77

Wedge 511™

11 3/4" TO 18 5/8" Pipe Body

Designation Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

in

11 3/4

60.00 65.00 58.80 71.80 95.00 96.00 102.90 109.00 117.00 128.00 123.40 136.00 139.00

0.489 0.534 0.470 0.582 0.566 0.575 0.625 0.656 0.625 0.688 0.625 0.693 0.720

11 7/8 16

18 18 5/8

10.772 10.682 10.935 10.711 14.868 14.850 14.750 14.688 16.750 16.624 17.375 17.239 17.185

10.616* 10.526* 10.799* 10.555* 14.750 14.750 14.562 14.500 16.562 16.500 17.187 17.051 16.997

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

in

sq in

%

%

60.7 55.8 55.6 61.3 63.5 62.5 63.6 65.2 62.1 61.0 64.5 64.8 63.1

74.0 68.0 66.1 71.5 73.6 72.5 75.1 76.2 73.6 71.5 75.7 74.9 75.5

10.674 10.674 10.926 10.675 14.807 14.807 14.621 14.559 16.625 16.563 17.254 17.118 17.064

4.65 4.65 4.14 4.97 4.97 4.97 5.60 5.60 5.60 5.60 5.60 5.60 5.60

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift. . Interchangeable where bracketed. . 18'' 117.00 lb/ft and 128.00 lb/ft are interchangeable with 17.875'' 105.00 lb/ft and 121.00 lb/ft Wedge 521 . Torque recommendation values available at www.tenaris.com/tenarishydril.

78

10.499 10.499 9.356 12.658 17.416 17.416 19.186 20.608 21.195 22.813 22.801 25.283 25.563

™.

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

997 997 889 1203 1655 1655 1823 1958 2014 2167 2166 2402 2428

1155 1155 1029 1392 1916 1916 2110 2267 2331 2509 2508 2781 2812

1312 1312 1170 1582 2177 2177 2398 2576 2649 2852 2850 3160 3195

x 1000 lb

577 577 515 696 958 958 1055 1133 1166 1255 1254 1391 1406

840 840 748 1013 1393 1393 1535 1649 1696 1825 1824 2023 2045

945 945 842 1139 1567 1567 1727 1855 1908 2053 2052 2275 2301

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

TUBING CONNECTIONS

Wedge 533™ 2 3/8" to 7 5/8"

79

. Streamlined, clearance OD facilitates running, pulling, and circulating. . Exceptional torque strength developed

1

through the simultaneous engagement of opposing flanks of the dovetail thread, permitting rotating and wash over in deviated holes without fear of structural failure.

1

. 100% internal pressure rated metal seal

2

.

maintains gas sealing capability under high axial and bending loads. The shallow angle run out chamfer on the pin ID promotes uniform stress under the seal around the full circumference of the connection.

. CB ring option

3

2 3

. 100% collapse rated thread seal created . Production tubing and workstrings . Drilling with tubing by full form contact of the dovetail . Tubing for internal coating (CB) threads, also providing a secondary internal pressure seal rated at pipe body. . 100% ratings for tension and bending . CB ring provided by machining pin and box on featureS

APPLICATIONS

Options

. 80

hot forged internal-external upsets. Reverse angle stab flank provides 100% compression rating. Wedge 533™ is interchangeable with Wedge 503™, Wedge 553™ and Wedge 563™.

Wedge 533™

2 3/8" TO 6 5/8" (7" TO 7 5/8" on reverse side)

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Box

Pin

Connection Inside Diameter

Make-Up Loss

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

%

%

4.70 5.30 5.95 6.60 7.45 6.50 7.90 8.70 9.50 10.70 11.65 9.30 10.30 12.95 14.30 15.80 16.70 17.05 11.00 11.60 13.40 14.80 16.10 19.00 21.10 22.50 11.60 12.75 13.50 15.50 17.00 19.20 21.60 24.00 26.50 15.00 18.00 21.40 23.20 24.10 15.50 17.00 20.00 23.00 26.00 26.80 28.40 24.00 28.00 32.00

0.190 0.218 0.254 0.295 0.336 0.217 0.276 0.308 0.340 0.392 0.440 0.254 0.289 0.375 0.430 0.476 0.510 0.530 0.262 0.286 0.330 0.380 0.415 0.500 0.562 0.610 0.250 0.271 0.290 0.337 0.380 0.430 0.500 0.560 0.630 0.296 0.362 0.437 0.478 0.500 0.275 0.304 0.361 0.415 0.476 0.500 0.530 0.352 0.417 0.475

1.995 1.939 1.867 1.785 1.703 2.441 2.323 2.259 2.195 2.091 1.995 2.992 2.922 2.750 2.640 2.548 2.480 2.440 3.476 3.428 3.340 3.240 3.170 3.000 2.876 2.780 4.000 3.958 3.920 3.826 3.740 3.640 3.500 3.380 3.240 4.408 4.276 4.126 4.044 4.000 4.950 4.892 4.778 4.670 4.548 4.500 4.440 5.921 5.791 5.675

1.901 1.845 1.773 1.691 1.609 2.347 2.229 2.165 2.101 1.997 1.901 2.867 2.797 2.625 2.515 2.423 2.355 2.315 3.351 3.303 3.215 3.115 3.045 2.875 2.751 2.655 3.875 3.833 3.795 3.701 3.615 3.515 3.375 3.255 3.115 4.283 4.151 4.001 3.919 3.875 4.825 4.767 4.653 4.545 4.423 4.375 4.315 5.796 5.666 5.550

2.657 2.685 2.737 2.793 2.845 3.192 3.282 3.328 3.337 3.405 3.464 3.886 3.941 4.067 4.100 4.160 4.202 4.226 4.406 4.444 4.513 4.549 4.599 4.598 4.679 4.739 4.891 4.926 4.958 4.992 5.058 5.133 5.114 5.196 5.288 5.430 5.535 5.526 5.586 5.618 5.899 5.948 6.040 6.124 6.084 6.119 6.163 7.147 7.254 7.345

2.657 2.679 2.690 2.718 2.744 3.179 3.213 3.236 3.231 3.265 3.295 3.827 3.854 3.917 3.943 3.973 3.994 4.006 4.336 4.355 4.390 4.397 4.422 4.459 4.499 4.529 4.828 4.846 4.862 4.868 4.901 4.938 4.966 5.007 5.053 5.279 5.279 5.416 5.446 5.462 5.779 5.779 5.779 5.779 5.798 5.798 5.798 6.932 6.932 6.932

1.945 1.889 1.817 1.735 1.653 2.391 2.273 2.209 2.145 2.041 1.945 2.942 2.872 2.700 2.590 2.498 2.430 2.390 3.426 3.378 3.290 3.190 3.120 2.950 2.826 2.730 3.850 3.908 3.870 3.776 3.690 3.590 3.450 3.330 3.190 4.358 4.226 4.076 3.994 3.950 4.900 4.842 4.728 4.620 4.483 4.435 4.374 5.871 5.741 5.625

3.64 3.64 3.64 3.64 3.64 3.64 3.64 3.64 4.09 4.09 4.09 3.64 3.64 3.64 4.49 4.49 4.49 4.49 3.64 3.64 3.64 4.09 4.09 5.28 5.28 5.28 3.64 3.64 3.64 4.09 4.09 4.09 5.28 5.28 5.28 3.99 3.99 5.36 5.36 5.36 3.99 3.99 3.99 3.99 4.30 4.30 4.30 4.05 4.05 4.05

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

2 3/8

TSH / PCC / Version 01 / March 2009

2 7/8

3 1/2

4

4 1/2

5

5 1/2

6 5/8

Turned Outside Diameter

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

124 140 161 183 204 172 214 236 257 290 320 246 277 350 394 430 455 470 292 317 361 411 444 522 577 617 317 342 364 419 467 522 597 659 728 416 501 595 645 672 429 471 554 630 714 746 786 659 773 872

143 162 186 212 237 199 248 273 298 336 370 285 321 405 456 497 527 544 338 367 419 475 514 605 668 715 367 396 422 485 541 605 691 762 843 481 580 689 747 778 497 546 641 729 826 864 910 763 895 1010

163 185 212 241 269 227 282 310 338 382 421 324 364 460 518 565 599 618 385 417 476 540 584 687 759 812 417 450 479 551 615 687 785 866 957 547 659 783 849 884 564 620 729 829 939 982 1034 867 1017 1147

x 1000 lb

72 81 93 106 118 100 124 137 149 168 185 142 160 202 228 249 263 272 169 184 209 238 257 302 334 357 184 198 211 242 271 302 346 381 421 241 290 345 373 389 248 273 321 365 413 432 455 382 447 505

104 118 135 154 172 145 180 199 217 245 269 207 233 295 332 362 383 396 246 267 304 346 374 440 486 520 267 288 307 353 393 440 503 555 613 350 422 501 543 565 361 397 466 530 601 628 662 555 651 734

117 133 152 173 194 163 203 224 244 275 303 233 262 331 373 407 431 445 277 300 342 389 421 495 546 585 300 324 345 397 443 495 565 624 689 394 475 564 611 636 406 447 525 597 676 707 745 624 732 826

. Interchangeable where bracketed. . Torque recommendation values available at www.tenaris.com/tenarishydril.

81

Wedge 533™

7" TO 7 5/8"

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Box

Pin

Connection Inside Diameter

Make-Up Loss

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

%

%

23.00 26.00 29.00 32.00 35.00 38.00 26.40 29.70 33.70 39.00

0.317 0.362 0.408 0.453 0.498 0.540 0.328 0.375 0.430 0.500

6.366 6.276 6.184 6.094 6.004 5.920 6.969 6.875 6.765 6.625

6.250 6.151 6.059 6.000 5.879 5.795 6.844 6.750 6.640 6.500

7.476 7.552 7.628 7.700 7.584 7.649 8.123 8.203 8.294 8.243

7.318 7.318 7.318 7.318 7.320 7.320 7.941 7.941 7.941 7.971

6.316 6.226 6.134 6.050 5.944 5.860 6.919 6.825 6.715 6.575

4.05 4.05 4.05 4.05 5.06 5.06 4.05 4.05 4.05 5.06

100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

7

7 5/8

Turned Outside Diameter

. Interchangeable where bracketed. . Torque recommendation values available at www.tenaris.com/tenarishydril.

82

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

632 717 803 885 966 1041 714 811 923 1063

732 830 929 1025 1119 1206 827 940 1069 1231

832 944 1056 1165 1272 1370 940 1068 1215 1399

x 1000 lb

366 415 465 512 559 603 414 470 535 616

532 604 676 745 814 877 602 683 778 895

599 679 760 839 916 986 677 769 875 1007

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

TUBING CONNECTIONS

Wedge 503™ 2 3/8" to 4 1/2"

83

. Streamlined, clearance OD facilitates

1

running, pulling, and circulating and eliminates coupling face hang-up.

1

. Exceptional torque strength developed

2

through the simultaneous engagement of the double hooked dovetail thread.

2

. 100% internal pressure rated metal seal

3

.

maintains gas sealing capability under high axial loads. The shallow angle run out chamfer on the pin ID promotes uniform stress under the seal around the full circumference of the connection.

3

. 100% pipe body ratings for tension featureS

. . 84

and bending provided by machining pin and box on API EUE upset. Reverse angle stab flank provides 100% compression rating. 100% collapse rated thread seal created by full form contact of the dovetail threads, also providing a secondary internal pressure seal rated at pipe body. Wedge 503™ is interchangeable with Wedge 533™, Wedge 553™ and Wedge 563™.

. Production tubing and workstrings . Thermal wells APPLICATIONS

Wedge 503™

2 3/8" TO 4 1/2"

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Box

Pin

Connection Inside Diameter

Make-Up Loss

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

%

%

4.70 6.50 9.30 11.00 11.60 12.75

0.190 0.217 0.254 0.262 0.250 0.271

1.995 2.441 2.992 3.476 4.000 3.958

1.901 2.347 2.867 3.351 3.875 3.833

2.657 3.192 3.886 4.406 4.891 4.926

2.657 3.179 3.827 4.336 4.829 4.846

1.945 2.391 2.942 3.426 3.950 3.908

3.64 3.64 3.64 3.64 3.64 3.64

100 100 100 100 100 100

100 100 100 100 100 100

Pipe Body

Designation

2 3/8 2 7/8 3 1/2 4 4 1/2

Turned Outside Diameter

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

124 172 246 292 317 342

143 199 285 338 367 396

163 227 324 385 417 450

x 1000 lb

72 100 142 169 184 198

104 145 207 246 267 288

117 163 233 277 300 324

TSH / PCC / Version 01 / March 2009

. Interchangeable where bracketed. . Torque recommendation values available at www.tenaris.com/tenarishydril.

85

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

TUBING CONNECTIONS

Wedge 553™ 2 3/8" to 7 5/8"

87

. Roller-stenciled make-up confirmation band. . Exceptional torque strength developed

1

through the simultaneous engagement of opposing flanks of the double hooked dovetail thread, pemiting drilling with tubing applications

1

. 100% internal pressure rated metal

2

.

seal maintains gas sealing capability under high axial and bending loads. The shallow angle run out chamfer on the pin ID promotes uniform stress under the seal around the full circumference of the connection.

. CB ring option

3

2 3

. 100% collapse rated thread seal created . Production tubing and workstrings . Drilling with tubing by full form contact of the dovetail . Tubing for internal coating (CB) threads, also providing a secondary internal pressure seal rated at pipe body. . 100% pipe body ratings for tension . CB ring and bending developed using nonfeatureS

APPLICATIONS

Options

. 88

upset pin end and upset box end pipe. Reverse angle stab flank provides 100% compression rating. Wedge 553™ is interchangeable with Wedge 503™, Wedge 533™ and Wedge 563™.

Wedge 553™

2 3/8" TO 6 5/8" (7" TO 7 5/8" on reverse side) Connection Inside Diameter

Make-Up Loss

Tensile Efficiency

Compression Efficiency

in

in

in

in

%

%

1.901 1.845 1.773 1.691 1.609 2.347 2.229 2.165 2.101 1.997 1.901 2.867 2.797 2.625 2.515 2.423 2.355 2.315 3.351 3.303 3.215 3.115 3.045 2.875 2.751 2.655 3.875 3.833 3.795 3.701 3.615 3.515 3.375 3.255 3.115 4.283 4.151 4.001 3.919 3.875 4.825 4.767 4.653 4.545 4.423 4.375 4.315 5.796 5.666 5.550

2.657 2.685 2.737 2.793 2.845 3.192 3.282 3.328 3.337 3.405 3.464 3.886 3.941 4.067 4.100 4.160 4.202 4.226 4.406 4.444 4.513 4.549 4.599 4.598 4.679 4.739 4.891 4.926 4.958 4.992 5.058 5.133 5.114 5.196 5.288 5.430 5.535 5.526 5.586 5.618 5.899 5.948 6.040 6.124 6.084 6.119 6.163 7.147 7.254 7.345

1.945 1.889 1.817 — — 2.391 2.273 — — — — 2.942 2.872 — — — — — 3.426 3.378 — — — — — — 3.850 3.908 3.870 — — — — — — 4.358 — 4.076 — — 4.900 4.842 — — 4.483 4.435 4.374 5.871 — —

3.64 3.64 3.64 3.64 3.64 3.64 3.64 3.64 4.09 4.09 4.09 3.64 3.64 3.64 4.49 4.49 4.49 4.49 3.64 3.64 3.64 4.09 4.09 5.28 5.28 5.28 3.64 3.64 3.64 4.09 4.09 4.09 5.28 5.28 5.28 3.99 3.99 5.36 5.36 5.36 3.99 3.99 3.99 3.99 4.30 4.30 4.30 4.05 4.05 4.05

95.1 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 95.9 100 100 100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

4.70 5.30 5.95 6.60 7.45 6.50 7.90 8.70 9.50 10.70 11.65 9.30 10.30 12.95 14.30 15.80 16.70 17.05 11.00 11.60 13.40 14.80 16.10 19.00 21.10 22.50 11.60 12.75 13.50 15.50 17.00 19.20 21.60 24.00 26.50 15.00 18.00 21.40 23.20 24.10 15.50 17.00 20.00 23.00 26.00 26.80 28.40 24.00 28.00 32.00

0.190 0.218 0.254 0.295 0.336 0.217 0.276 0.308 0.340 0.392 0.440 0.254 0.289 0.375 0.430 0.476 0.510 0.530 0.262 0.286 0.330 0.380 0.415 0.500 0.562 0.610 0.250 0.271 0.290 0.337 0.380 0.430 0.500 0.560 0.630 0.296 0.362 0.437 0.478 0.500 0.275 0.304 0.361 0.415 0.476 0.500 0.530 0.352 0.417 0.475

1.995 1.939 1.867 1.785 1.703 2.441 2.323 2.259 2.195 2.091 1.995 2.992 2.922 2.750 2.640 2.548 2.480 2.440 3.476 3.428 3.340 3.240 3.170 3.000 2.876 2.780 4.000 3.958 3.920 3.826 3.740 3.640 3.500 3.380 3.240 4.408 4.276 4.126 4.044 4.000 4.950 4.892 4.778 4.670 4.548 4.500 4.440 5.921 5.791 5.675

2 3/8

2 7/8

TSH / PCC / Version 01 / March 2009

BOx Outside Diameter

Pipe Body

Designation Size

3 1/2

4

4 1/2

5

5 1/2

6 5/8

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

118 140 161 183 204 172 214 236 257 290 320 246 277 350 394 430 455 470 292 317 361 411 444 522 577 617 317 342 364 419 467 522 597 659 728 416 501 571 645 672 429 471 554 630 714 746 786 659 773 872

136 162 186 212 237 199 248 273 298 336 370 285 321 405 456 497 527 544 338 367 419 475 514 605 668 715 367 396 422 485 541 605 691 762 843 481 580 661 747 778 497 546 641 729 826 864 910 763 895 1010

155 185 212 241 269 227 282 310 338 382 421 324 364 460 518 565 599 618 385 417 476 540 584 687 759 812 417 450 479 551 615 687 785 866 957 547 659 751 849 884 564 620 729 829 939 982 1034 867 1017 1147

x 1000 lb

68 81 93 106 118 100 124 137 149 168 185 142 160 202 228 249 263 272 169 184 209 238 257 302 334 357 184 198 211 242 271 302 346 381 421 241 290 331 373 389 248 273 321 365 413 432 455 382 447 505

99 118 135 154 172 145 180 199 217 245 269 207 233 295 332 362 383 396 246 267 304 346 374 440 486 520 267 288 307 353 393 440 503 555 613 350 422 480 543 565 361 397 466 530 601 628 662 555 651 734

111 133 152 173 194 163 203 224 244 275 303 233 262 331 373 407 431 445 277 300 342 389 421 495 546 585 300 324 345 397 443 495 565 624 689 394 475 541 611 636 406 447 525 597 676 707 745 624 732 826

. Interchangeable where bracketed. . When no value is shown for “Connection ID“, swaging is omitted and the ID is the pipe body ID. . Wedge 553 is interchangeable with Wedge 503 , Wedge 533 and Wedge 563 in a given size and weight. . Torque recommendation values available at www.tenaris.com/tenarishydril. ™







89

Wedge 553™

7" TO 7 5/8" BOx Outside Diameter

Connection Inside Diameter

Make-Up Loss

Tensile Efficiency

Compression Efficiency

in

in

in

in

%

%

6.250 6.151 6.059 6.000 5.879 5.795 6.844 6.750 6.640 6.500

7.476 7.552 7.628 7.700 7.584 7.649 8.123 8.203 8.294 8.243

6.316 6.226 — — 5.954 5.870 6.919 — — 6.575

4.05 4.05 4.05 4.05 5.06 5.06 4.05 4.05 4.05 5.06

100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

23.00 26.00 29.00 32.00 35.00 38.00 26.40 29.70 33.70 39.00

0.317 0.362 0.408 0.453 0.498 0.540 0.328 0.375 0.430 0.500

6.366 6.276 6.184 6.094 6.004 5.920 6.969 6.875 6.765 6.625

7

7 5/8

. Interchangeable where bracketed. . When no value is shown for “Connection ID“, swaging is omitted and the ID is the pipe body ID. . Wedge 553 is interchangeable with Wedge 503 , Wedge 533 and Wedge 563 in a given size and weight. . Torque recommendation values available at www.tenaris.com/tenarishydril. ™

90







Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

632 717 803 885 966 1041 714 811 923 1063

732 830 929 1025 1119 1206 827 940 1069 1231

832 944 1056 1165 1272 1370 940 1068 1215 1399

x 1000 lb

366 415 465 512 559 603 414 470 535 616

532 604 676 745 814 877 602 683 778 895

599 679 760 839 916 986 677 769 875 1007

Legacy Series

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING & TUBING CONNECTIONS

3SB™ 2 3/8" to 13 5/8"

93

. Flank-to-flank contact thread design

1

.

allows optimum performance under tension and compression cycling. Flat crested thread parallel to pipe axis helps correct misalignment during make-up.

1

. 100% internal pressure rated metal to

2

metal radial seal and internal shoulder maintains gas sealability under high axial loads.

2

. Reliable and field proven connection featureS

design, specially on chrome materials.

. Intermediate casing . Production casing and tie-backs . Production tubing and workstrings APPLICATIONS

94

. Special clearance . Special bevel OPTIONS

3SB™ - Casing

4 1/2" TO 9 7/8" (10 3/4" TO 13 5/8" on reverse side)

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

11.60 13.50 15.10 16.90 21.60 15.00 18.00 20.30 23.20 24.10 15.50 17.00 20.00 23.00 26.00 18.80 20.00 24.00 28.00 32.00 23.00 26.00 29.00 32.00 35.00 38.00 41.00 41.20 26.40 29.70 33.70 39.00 42.80 47.10 63.20 46.10 32.00 36.00 40.00 44.00 49.00 52.00 36.00 40.00 43.50 47.00 53.50 58.40 61.10 59.20 62.80 70.40

0.250 0.290 0.337 0.380 0.500 0.296 0.362 0.408 0.478 0.500 0.275 0.304 0.361 0.415 0.476 0.304 0.288 0.352 0.417 0.475 0.317 0.362 0.408 0.453 0.498 0.540 0.590 0.578 0.328 0.375 0.430 0.500 0.562 0.624 0.875 0.595 0.352 0.400 0.450 0.500 0.557 0.595 0.352 0.395 0.435 0.472 0.545 0.595 0.625 0.595 0.625 0.708

4.000 3.920 3.826 3.740 3.500 4.408 4.276 4.184 4.044 4.000 4.950 4.892 4.778 4.670 4.548 5.392 6.049 5.921 5.791 5.676 6.366 6.276 6.184 6.094 6.004 5.920 5.820 6.094 6.969 6.876 6.765 6.625 6.502 6.376 5.876 6.560 7.921 7.825 7.725 7.625 7.511 7.435 8.921 8.835 8.755 8.681 8.535 8.435 8.375 8.560 8.625 8.459

3.875 3.794 3.701 * 3.615 3.375 4.283 4.151 4.059 3.919 3.875 4.825 4.767 4.653 4.545 4.423 * 5.267 5.924 5.796 5.666 5.550 6.241 * 6.151 6.059 * 5.969 * 5.879 5.794 * 5.694 5.969 6.844 6.750 6.640 6.500 6.376 6.251 5.750 6.435 * 7.796 7.700 7.600 * 7.500 7.386 7.310 8.765 8.679 * 8.599 * 8.525 8.379 * 8.279 * 8.219 8.404 8.469 * 8.303 *

9.488 9.488 9.488 9.488 9.488 10.118 10.118 10.118 10.118 10.118 10.197 10.197 10.197 10.197 10.197 9.134 10.827 10.827 10.827 10.827 11.378 11.378 11.378 11.378 11.378 11.378 11.378 11.378 11.378 11.378 11.378 11.378 11.378 11.378 11.378 11.378 11.417 11.417 11.417 11.417 11.417 11.417 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811

3.965 3.969 3.898 3.811 3.811 4.406 4.374 4.291 4.291 4.291 4.898 4.890 4.874 4.787 4.787 5.311 6.024 6.008 5.894 5.894 6.339 6.339 6.276 6.236 6.169 6.169 6.169 6.236 6.941 6.941 6.874 6.795 6.795 6.795 6.261 6.803 7.874 7.913 7.874 7.795 7.795 7.795 8.878 8.913 8.866 8.819 8.780 8.780 8.780 8.791 8.791 8.690

4.358 4.358 4.358 4.358 4.358 4.673 4.673 4.673 4.673 4.673 4.705 4.705 4.705 4.705 4.705 4.075 5.020 5.020 5.020 5.020 5.295 5.295 5.295 5.295 5.295 5.295 5.295 5.295 5.295 5.295 5.295 5.295 5.295 5.295 5.295 5.295 5.311 5.311 5.311 5.311 5.311 5.311 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508

4.256 4.256 5.194 5.194 6.220 5.410 5.410 6.946 6.946 7.234 5.820 5.820 5.820 6.778 7.851 5.484 9.607 9.607 9.607 9.607 9.010 9.010 9.010 10.416 10.416 11.819 11.819 9.317 12.660 12.660 12.660 12.660 12.660 14.355 17.055 11.865 16.136 16.136 16.136 16.136 16.136 16.136 18.095 18.095 18.095 18.095 18.095 18.095 18.095 15.212 14.334 14.334

100 100 100 100 99.0 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 99.0 76.9 100 100 100 100 100 100 92.0 89.0 100 100 100 100 100 100 100 100 100 100 100 100 100 89.0 79.0 70.0

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

4 1/2

5

TSH / PCC / Version 01 / March 2009

Options

5 1/2

6 6 5/8

7

7 1/4 7 5/8

7 3/4 8 5/8

9 5/8

9 3/4 9 7/8

Coupling

5.000 5.000 5.118 5.118 5.252 5.563 5.563 5.736 5.736 5.768 6.051 6.051 6.051 6.150 6.260 6.500 7.390 7.390 7.390 7.390 7.657 7.657 7.657 7.772 7.772 7.894 7.894 7.772 8.500 8.500 8.500 8.500 8.500 8.626 8.823 8.500 9.626 9.626 9.626 9.626 9.626 9.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Special Clearance Coupling 110 ksi

125 ksi

x 1000 lb

184 211 242 271 342 241 290 324 373 389 248 273 321 365 413 299 315 382 447 504 366 415 465 512 559 603 650 512 414 469 535 616 685 755 938 653 503 568 636 702 776 826 564 630 691 746 855 928 972 837 788 788

267 307 353 393 498 350 422 471 543 565 361 397 466 530 601 435 459 555 651 733 532 604 676 745 814 877 946 745 602 682 778 895 997 1099 1364 949 732 827 925 1021 1129 1201 820 916 1005 1086 1244 1350 1414 1217 1147 1147

300 345 397 443 560 394 475 530 611 636 406 447 525 597 676 490 516 624 732 825 599 679 760 839 916 986 1064 839 677 768 875 1007 1121 1236 1535 1068 823 930 1040 1149 1271 1351 923 1031 1130 1222 1399 1519 1590 1369 1290 1290

317 364 419 467 591 416 501 559 645 672 429 471 554 630 714 517 545 659 773 871 632 717 803 885 966 1041 1123 885 714 810 923 1063 1184 1305 1620 1127 869 982 1098 1212 1341 1426 974 1088 1193 1289 1477 1604 1679 1445 1362 1362

367 422 485 541 684 481 580 647 747 778 497 546 641 729 826 598 631 763 895 1009 732 830 929 1025 1119 1206 1300 1025 827 938 1069 1231 1371 1511 1876 1305 1006 1137 1271 1404 1553 1651 1128 1260 1381 1493 1710 1857 1944 1673 1577 1577

417 479 551 615 778 547 659 736 849 884 564 620 729 829 939 680 717 867 1017 1146 832 944 1056 1165 1272 1370 1477 1165 940 1066 1215 1399 1558 1717 2132 1483 1144 1292 1445 1595 1765 1876 1282 1432 1570 1697 1943 2110 2209 1902 1792 1792

Outside Diameter

Critical Section Area

Tensile Efficiency

in

sq in

%

4.890 4.890 5.000 5.000 5.000 5.453 5.453 5.563 5.563 5.563 5.917 5.969 5.969 6.051 6.051 6.360 7.169 7.169 7.276 7.276 7.469 7.547 7.547 7.657 7.657 7.657 7.657 — 8.126 8.201 8.291 8.409 8.409 8.500 — — 9.165 9.248 9.335 9.417 9.512 9.512 10.157 10.232 10.303 10.370 10.370 10.370 10.370 — — —

3.402 3.402 4.256 4.256 4.256 4.458 4.458 5.410 5.410 5.410 4.569 5.055 5.055 5.820 5.820 4.070 7.080 7.080 8.294 8.294 6.789 7.710 7.710 9.010 9.010 9.010 9.010 — 7.764 8.739 9.905 11.451 11.451 12.660 — — 9.347 10.548 11.816 13.025 14.437 14.437 10.456 11.658 12.801 13.890 13.890 13.890 13.890 — — —

100 88.7 96.6 86.5 67.7 100 84.5 91.9 79.7 76.5 100 100 86.7 87.8 77.5 74.8 100 100 100 90.4 100 100 91.2 96.7 88.6 82.2 75.8 — 100 100 100 100 91.8 92.2 100 100 100 100 100 100 100 96.2 100 100 100 100 89.3 82.3 78.6 — — —

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection. 95

3SB™ - Casing

10 3/4" TO 13 5/8"

Options

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

10 1/4 10 3/4

82.00 40.50 45.50 51.00 55.50 60.70 65.70 71.10 73.20 47.00 54.00 60.00 65.00 54.50 61.00 68.00 72.00 86.00 81.40 88.20

0.800 0.350 0.400 0.450 0.495 0.545 0.595 0.650 0.672 0.375 0.435 0.489 0.534 0.380 0.430 0.480 0.514 0.625 0.580 0.625

8.650 10.050 9.950 9.850 9.760 9.660 9.560 9.450 9.406 11.000 10.880 10.772 10.682 12.615 12.515 12.415 12.347 12.125 12.340 12.375

8.494 9.894 9.794* 9.694 9.604* 9.504 9.404* 9.294 9.250 10.844 10.724 10.616* 10.526* 12.459 12.359 12.259 12.191* 11.969* 12.153* 12.187*

11.516 11.748 11.748 11.748 11.748 11.748 11.748 11.748 11.748 12.748 12.748 12.748 12.748 14.374 14.374 14.374 14.400 14.400 14.374 14.374

11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811 11.811

8.996 10.008 10.047 9.984 9.929 9.906 9.906 9.748 9.748 11.087 10.980 10.902 10.807 12.717 12.618 12.520 12.520 12.520 12.520 12.520

5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508 5.508

21.813 20.104 20.104 20.104 20.104 20.104 20.104 20.104 20.104 21.902 21.902 21.902 21.902 24.887 24.887 24.887 24.887 24.887 20.903 20.224

91.8 100 100 100 100 100 100 97.0 94.0 100 100 100 100 100 100 100 100 99.0 89.0 79.0

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

11 3/4

13 3/8

13 1/2 13 5/8

Coupling

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection.

96

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Special Clearance Coupling 110 ksi

125 ksi

x 1000 lb

1200 629 715 801 877 961 1044 1106 1106 737 850 951 1035 853 962 1069 1142 1369 1150 1112

1745 915 1040 1165 1276 1398 1519 1608 1608 1072 1237 1384 1505 1241 1399 1556 1661 1991 1672 1618

1963 1029 1171 1311 1435 1573 1708 1809 1809 1206 1392 1557 1693 1396 1574 1750 1869 2240 1881 1820

2072 1086 1236 1383 1515 1660 1803 1910 1910 1273 1469 1643 1788 1474 1661 1847 1973 2364 1986 1921

2399 1258 1431 1602 1754 1922 2088 2211 2211 1474 1701 1903 2070 1706 1924 2139 2284 2738 2299 2225

2727 1429 1626 1820 1993 2184 2373 2513 2513 1675 1933 2162 2352 1939 2186 2431 2596 3111 2613 2528

Outside Diameter

Critical Section Area

Tensile Efficiency

in

sq in

%

— 11.283 11.374 11.465 11.543 11.630 11.630 11.630 11.630 12.331 12.441 12.539 12.539 13.969 14.059 14.150 14.213 14.213 — —

— 11.654 13.274 14.970 16.317 17.899 17.899 17.899 17.899 13.648 15.788 17.710 17.710 15.849 17.830 19.846 21.251 21.251 — —

— 100 100 100 100 100 94.3 86.8 84.1 100 100 100 94.1 100 100 100 100 84.9 — —

3SB™ - Tubing

2 3/8" TO 4 1/2"

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

4.70 5.30 5.95 6.20 7.70 6.50 7.90 8.70 9.50 10.70 11.00 11.65 9.30 10.30 12.80 12.95 15.10 15.80 16.70 17.05 11.00 13.40 19.00 22.50 12.75 13.50 15.50 19.20 21.60 24.00 26.50

0.190 0.218 0.254 0.261 0.336 0.217 0.276 0.308 0.340 0.392 0.405 0.440 0.254 0.289 0.368 0.375 0.449 0.476 0.510 0.530 0.262 0.330 0.500 0.610 0.271 0.290 0.337 0.430 0.500 0.560 0.630

1.995 1.939 1.867 1.853 1.704 2.441 2.323 2.259 2.195 2.091 2.065 1.995 2.992 2.922 2.764 2.750 2.602 2.548 2.480 2.440 3.476 3.340 3.000 2.780 3.958 3.920 3.826 3.640 3.500 3.380 3.240

1.901 1.845 1.774 1.759 1.610 2.348 2.230 2.166 2.101 1.997 1.971 1.901 2.867 2.797 2.639 2.624 2.477 2.423 2.355 2.315 3.351 3.215 2.875 2.655 3.833 3.794 3.701* 3.515 3.375 3.255 3.115

8.472 8.472 8.472 8.472 8.472 8.472 8.472 8.472 8.472 8.472 8.472 8.472 8.535 8.535 8.535 8.535 8.535 8.535 8.535 8.535 9.118 9.118 9.118 9.118 9.598 9.598 9.598 9.598 9.598 9.598 9.598

1.933 1.882 1.937 1.909 1.799 2.394 2.394 2.339 2.299 2.220 2.220 2.220 3.020 3.004 2.886 2.886 2.768 2.768 2.768 2.768 3.429 3.445 3.209 3.209 3.917 3.878 3.921 3.772 3.772 3.654 3.654

3.743 3.743 3.743 3.743 3.743 3.743 3.743 3.743 3.743 3.743 3.743 3.743 3.775 3.775 3.775 3.775 3.775 3.775 3.775 3.775 4.056 4.056 4.056 4.056 4.306 4.306 4.306 4.306 4.306 4.306 4.306

2.370 2.370 2.370 2.370 2.370 3.503 3.503 3.503 3.503 3.503 3.503 3.503 5.031 5.031 5.031 5.031 5.031 5.031 5.031 5.031 5.792 5.792 5.792 5.792 6.163 6.163 6.163 6.163 6.163 6.163 6.163

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 89 100 100 100 100 98 89 80

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

2 3/8

2 7/8

TSH / PCC / Version 01 / March 2009

Options

3 1/2

4

4 1/2

Coupling

2.874 2.874 2.874 2.874 2.874 3.500 3.500 3.500 3.500 3.500 3.500 3.500 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.752 4.752 4.752 4.752 5.201 5.201 5.201 5.201 5.201 5.201 5.201

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Special Clearance Coupling 110 ksi

125 ksi

x 1000 lb

72 81 93 95 118 100 124 137 149 168 173 185 142 160 199 202 237 249 263 272 169 209 302 319 198 211 242 302 339 339 339

104 118 135 139 172 145 180 199 217 245 251 269 207 233 290 295 344 362 383 396 246 304 440 463 288 307 353 440 493 493 493

117 133 152 156 193 163 203 224 244 275 283 303 233 262 326 331 387 407 431 445 277 342 495 521 324 345 397 495 555 555 555

124 140 161 165 204 172 214 236 257 290 299 320 246 277 344 350 409 430 455 470 292 361 522 550 342 364 419 522 585 585 585

143 162 186 191 236 199 248 273 298 336 346 370 285 321 398 405 473 497 527 544 338 419 605 637 396 422 485 605 678 678 678

163 185 212 217 269 227 282 310 338 382 393 421 324 364 453 460 538 565 599 618 385 476 687 724 450 479 551 687 770 770 770

Outside Diameter

Critical Section Area

Tensile Efficiency

in

sq in

%

2.701 2.701 2.732 2.774 — 3.220 3.280 3.323 3.366 — — — 3.882 3.933 4.051 4.059 — — — — 4.402 4.492 — — 4.921 4.921 4.996 — — — —

1.603 1.603 1.741 1.790 — 2.024 2.333 2.554 2.781 — — — 2.682 2.995 3.736 3.787 — — — — 3.292 3.920 — — 3.945 3.945 4.529 — — — —

100 100 100 100 — 100 100 100 100 — — — 100 100 100 100 — — — — 100 100 — — 100 100 100 — — — —

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection.

97

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING & TUBING CONNECTIONS

MS™ 2 3/8" to 14"

99

. Optimized modified buttress thread

1

design provides easy stabbing and trouble-free make-up.

1

2

. Multi-tapered sealing mechanism

2

provides 100% internal and external pressure ratings.

. Proven design provides excellent featureS

gas tightness with high mechanical properties.

. Intermediate casing . Production casing and tie-backs . Production tubing and workstrings APPLICATIONS

100

. Matched strength . Special clearance . Special bevel OPTIONS

MS™

2 3/8" TO 7" (7 5/8" TO 14" on reverse side)

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

4.60 5.10 5.80 6.40 7.70 8.60 7.70 9.20 10.20 12.70 10.90 13.00 14.85 10.50 11.60 12.60 13.50 15.10 16.60 17.00 18.90 21.50 23.70 13.00 15.00 18.00 20.30 20.80 21.40 23.20 24.10 14.00 15.50 17.00 20.00 23.00 26.00 26.80 28.40 29.70 32.60 24.00 28.00 32.00 23.00 26.00 29.00 32.00 35.00 38.00 41.00

0.190 0.218 0.254 0.217 0.276 0.308 0.216 0.254 0.289 0.375 0.262 0.330 0.380 0.224 0.250 0.271 0.290 0.337 0.375 0.380 0.430 0.500 0.560 0.253 0.296 0.362 0.408 0.422 0.437 0.478 0.500 0.244 0.275 0.304 0.361 0.415 0.476 0.500 0.530 0.562 0.625 0.352 0.417 0.475 0.317 0.362 0.408 0.453 0.498 0.540 0.590

1.995 1.939 1.867 2.441 2.323 2.259 3.068 2.992 2.922 2.750 3.476 3.340 3.240 4.052 4.000 3.958 3.920 3.826 3.750 3.740 3.640 3.500 3.380 4.494 4.408 4.276 4.184 4.156 4.126 4.044 4.000 5.012 4.950 4.892 4.778 4.670 4.548 4.500 4.440 4.376 4.250 5.921 5.791 5.676 6.366 6.276 6.184 6.094 6.004 5.920 5.820

1.901 1.845 1.774 2.348 2.230 2.166 2.943 2.867 2.797 2.625 3.351 3.215 3.115 3.927 3.875 3.833 3.794 3.701 * 3.624 3.615 3.515 3.375 3.255 4.369 4.283 4.151 4.059 4.031 4.001 3.919 3.875 4.887 4.825 4.767 4.653 4.545 4.423 * 4.375 4.315 4.251 4.124 5.796 5.666 5.550 6.241 * 6.151 6.059 * 5.969 * 5.879 5.794 * 5.694

6.220 6.220 6.220 6.850 6.850 6.850 7.953 7.953 7.953 7.953 9.173 9.173 9.173 9.803 9.803 9.803 9.803 9.803 9.803 9.803 9.803 9.803 9.803 10.866 10.866 10.866 10.866 10.866 10.866 10.866 10.866 10.866 10.866 10.866 10.866 10.866 10.866 10.866 10.866 10.866 10.866 11.457 11.457 11.457 11.772 11.772 11.772 11.772 11.772 11.772 11.772

1.939 1.939 1.939 2.384 2.384 2.384 2.994 3.033 2.994 2.947 3.500 3.406 3.346 4.076 4.045 4.006 4.006 3.955 3.927 3.927 3.896 3.852 3.817 4.488 4.488 4.439 4.339 4.339 4.339 4.339 4.339 4.980 4.980 4.931 4.902 4.843 4.843 4.791 4.791 4.740 4.740 6.024 5.906 5.906 6.386 6.307 6.307 6.307 6.307 6.307 6.240

2.520 2.520 2.520 2.835 2.835 2.835 3.386 3.386 3.386 3.386 3.701 3.701 3.701 4.016 4.016 4.016 4.016 4.016 4.016 4.016 4.016 4.016 4.016 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.252 4.409 4.409 4.409 4.409 4.409 4.409 4.409

1.730 1.730 1.903 2.503 2.868 2.868 2.891 2.891 3.382 4.261 3.435 4.351 5.033 3.009 3.984 3.984 4.289 5.220 5.220 5.220 5.504 6.302 6.952 5.513 5.513 5.513 5.513 5.513 5.513 5.513 5.513 5.929 5.929 5.929 5.929 6.834 7.947 7.947 8.804 8.804 9.593 9.911 9.911 9.911 9.302 9.302 9.302 9.302 9.302 9.302 9.302

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 94 91 88 81 78 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 91 85 78

100 89 78 100 81 74 94 71 72 66 72 79 80 53 57 63 59 62 62 61 60 59 58 74 63 63 74 71 69 64 61 79 70 76 70 72 63 68 65 68 62 53 66 58 58 67 60 54 49 46 51

Pipe Body

Designation

2 3/8

2 7/8

TSH / PCC / Version 01 / March 2009

3 1/2

4

4 1/2

5

5 1/2

6 5/8

7

Options

Coupling

2.776 2.776 2.815 3.337 3.406 3.406 3.917 3.917 3.996 4.134 4.421 4.551 4.646 4.921 4.921 4.921 4.961 5.079 5.079 5.079 5.114 5.213 5.291 5.563 5.563 5.563 5.563 5.563 5.563 5.563 5.563 6.051 6.051 6.051 6.051 6.146 6.260 6.260 6.346 6.346 6.425 7.390 7.390 7.390 7.657 7.657 7.657 7.657 7.657 7.657 7.657

Special Clearance Coupling

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

x 1000 lb

72 81 93 100 124 137 123 142 160 202 169 209 238 165 184 198 211 242 267 271 302 346 381 208 241 290 303 303 303 303 303 222 248 273 321 365 413 432 455 480 526 382 447 504 366 415 465 512 512 512 512

104 118 135 145 180 199 178 207 233 295 246 304 346 241 267 288 307 353 389 393 440 503 555 302 350 422 441 441 441 441 441 322 361 397 466 530 601 628 662 697 766 555 651 733 532 604 676 745 744 744 744

117 133 152 163 203 224 201 233 262 331 277 342 389 271 300 324 345 397 437 443 495 565 624 340 394 475 496 496 496 496 496 363 406 447 525 597 676 707 745 785 861 624 732 825 599 679 760 839 837 837 837

124 140 161 172 214 236 212 246 277 350 292 361 411 286 317 342 364 419 462 467 522 597 659 358 416 501 524 524 524 524 524 383 429 471 554 630 714 746 786 828 909 659 773 871 632 717 803 885 884 884 884

143 162 186 199 248 273 245 285 321 405 338 419 475 331 367 396 422 485 535 541 605 691 762 415 481 580 606 606 606 606 606 443 497 546 641 729 826 864 910 959 1053 763 895 1009 732 830 929 1025 1023 1023 1023

163 185 212 227 282 310 279 324 364 460 385 476 540 376 417 450 479 551 607 615 687 785 866 472 547 659 689 689 689 689 689 504 564 620 729 829 939 982 1034 1090 1197 867 1017 1146 832 944 1056 1165 1163 1163 1163

Matched StRENgth

Outside Diameter

Critical Section Area

Tensile Efficiency

Outside Diameter

in

sq in

%

in

— — — — — — — — — — — — — 3.633 3.633 3.633 3.633 3.633 3.633 3.633 3.633 3.633 3.633 3.891 3.891 3.891 3.891 3.891 3.891 3.891 3.891 4.306 4.306 4.306 4.306 4.306 4.306 4.306 4.306 4.306 4.306 5.506 5.506 5.506 5.960 5.960 5.960 5.960 5.960 5.960 5.960

— — — — — — — — — — — — — 100 100 100 94.7 82.4 74.8 73.9 66.1 57.8 52.4 100 89.0 73.8 66.1 64.1 62.1 57.3 55.0 100 95.4 86.8 73.9 65.0 57.3 54.8 52.0 49.4 45.0 79.4 67.7 60.0 89.6 78.9 70.5 64.0 58.6 54.4 50.2

2.676 2.717 2.767 3.202 3.289 3.333 3.868 3.868 3.921 4.044 4.366 4.474 4.548 4.875 4.875 4.875 4.903 4.976 5.034 5.041 5.114 5.211 5.289 5.358 5.433 5.535 5.606 5.626 5.650 5.709 5.740 5.848 5.902 5.949 6.043 6.126 6.217 6.256 6.295 6.339 6.425 7.129 7.235 7.326 7.434 7.510 7.586 7.658 7.729 7.794 7.869

— — — — — — — — — — — — — 4.875 4.875 4.875 4.875 4.875 4.875 4.875 4.875 4.875 4.875 5.374 5.374 5.374 5.374 5.374 5.374 5.374 5.374 5.878 5.878 5.878 5.878 5.878 5.878 5.878 5.878 5.878 5.878 7.000 7.000 7.000 7.375 7.375 7.375 7.375 7.375 7.375 7.375

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.

101

MS™

7 5/8" TO 14"

Options

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

4.606 4.606 4.606 4.606 4.606 4.606 4.606 4.606 4.606 4.606 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 5.512 5.512 5.512 5.512 5.512

13.158 13.158 13.158 13.158 13.158 13.158 13.158 13.325 13.325 13.325 16.830 16.830 16.830 16.830 16.830 18.693 18.693 18.693 18.693 18.693 18.693 18.693 18.350 21.047 21.047 21.047 21.047 20.719 20.719 20.719 20.719 20.719 20.719 20.719 20.719 22.653 22.653 22.653 22.653 20.662 25.676 25.676 25.676 25.676 25.911 26.145 32.226 32.226 32.226 32.226 32.226

100 100 100 100 100 100 96 100 95 93 100 100 100 100 100 100 100 100 100 100 100 99 100 100 100 100 100 100 100 100 100 100 100 97 94 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

56 49 61 53 48 45 43 76 76 76 55 66 59 54 49 54 67 61 56 49 45 47 45 48 46 46 44 53 68 61 56 51 47 61 59 60 74 66 67 69 60 73 66 61 68 63 63 69 66 66 66

Pipe Body

Designation

7 5/8

7 3/4

8 5/8

9 5/8

9 7/8

10 3/4

11 3/4

11 7/8 13 3/8

13 1/2 13 5/8 14

26.40 29.70 33.70 39.00 42.80 45.30 47.10 46.10 47.60 48.60 32.00 36.00 40.00 44.00 49.00 36.00 40.00 43.50 47.00 53.50 58.40 64.90 62.80 67.30 68.80 70.40 72.10 40.50 45.50 51.00 55.50 60.70 65.70 73.20 76.60 47.00 54.00 60.00 65.00 71.80 54.50 61.00 68.00 72.00 80.40 88.20 82.50 94.80 99.30 110.00 111.00

0.328 0.375 0.430 0.500 0.562 0.595 0.625 0.595 0.625 0.640 0.352 0.400 0.450 0.500 0.557 0.352 0.395 0.435 0.472 0.545 0.595 0.672 0.625 0.668 0.700 0.707 0.725 0.350 0.400 0.450 0.495 0.545 0.595 0.672 0.700 0.375 0.435 0.489 0.534 0.582 0.380 0.430 0.480 0.514 0.576 0.625 0.562 0.656 0.688 0.772 0.779

6.969 6.876 6.765 6.625 6.502 6.435 6.375 6.560 6.500 6.470 7.921 7.825 7.725 7.625 7.511 8.921 8.835 8.755 8.681 8.535 8.435 8.281 8.625 8.539 8.475 8.461 8.425 10.050 9.950 9.850 9.760 9.660 9.560 9.406 9.350 11.000 10.880 10.772 10.682 10.711 12.615 12.515 12.415 12.347 12.348 12.375 12.876 12.688 12.624 12.456 12.442

Coupling

6.844 6.750 6.640 6.500 6.376 6.310* 6.250 6.435* 6.374 6.344 7.796* 7.700 7.600* 7.500 7.386 8.765 8.679* 8.599* 8.525 8.379* 8.279* 8.125 8.469* 8.383* 8.319* 8.305* 8.269* 9.894 9.794* 9.694 9.604* 9.504 9.404* 9.250 9.194 10.843 10.724 10.616* 10.526* 10.555* 12.459 12.359 12.259 12.191* 12.161* 12.187* 12.689 12.501 12.436 12.269 12.254*

8.500 8.500 8.500 8.500 8.500 8.500 8.500 8.626 8.626 8.626 9.626 9.626 9.626 9.626 9.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.827 10.984 10.984 10.984 10.984 11.748 11.748 11.748 11.748 11.748 11.748 11.748 11.748 12.752 12.752 12.752 12.752 12.764 14.374 14.374 14.374 14.374 14.500 14.626 15.000 15.000 15.000 15.000 15.000

12.165 12.165 12.165 12.165 12.165 12.165 12.165 12.165 12.165 12.165 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 13.583 13.583 13.583 13.583 13.583

6.996 6.996 6.890 6.890 6.890 6.890 6.890 6.756 6.728 6.713 7.972 7.874 7.874 7.874 7.874 8.976 8.878 8.878 8.878 8.878 8.878 8.819 9.102 9.055 9.055 9.055 9.055 10.110 9.992 9.992 9.992 9.992 9.992 9.811 9.811 11.055 10.925 10.925 10.874 10.941 12.677 12.559 12.559 12.559 12.559 12.685 12.807 12.677 12.677 12.598 12.598

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.

102

Special Clearance Coupling

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

x 1000 lb

414 469 535 616 685 723 724 736 733 733 503 568 636 702 776 564 630 691 746 855 928 1028 999 1063 1110 1120 1146 629 715 801 877 961 1044 1140 1140 737 850 951 1035 1136 853 962 1069 1142 1286 1404 1305 1513 1583 1765 1780

602 682 778 895 997 1051 1053 1070 1066 1066 732 827 925 1021 1129 820 916 1005 1086 1244 1350 1495 1453 1546 1614 1629 1667 915 1040 1165 1276 1398 1519 1658 1658 1072 1237 1384 1505 1652 1241 1399 1556 1661 1871 2042 1898 2200 2302 2567 2588

677 768 875 1007 1121 1183 1184 1204 1199 1199 823 930 1040 1149 1271 923 1031 1130 1222 1399 1519 1682 1635 1739 1816 1833 1876 1029 1171 1311 1435 1573 1708 1865 1865 1206 1392 1557 1693 1858 1396 1574 1750 1869 2105 2297 2135 2475 2590 2887 2912

714 810 923 1063 1184 1248 1250 1271 1266 1266 869 982 1098 1212 1341 974 1088 1193 1289 1477 1604 1776 1725 1836 1917 1934 1980 1086 1236 1383 1515 1660 1803 1968 1968 1273 1469 1643 1788 1962 1474 1661 1847 1973 2222 2425 2254 2613 2733 3048 3074

827 938 1069 1231 1371 1445 1447 1471 1466 1466 1006 1137 1271 1404 1553 1128 1260 1381 1493 1710 1857 2056 1998 2125 2219 2240 2292 1258 1431 1602 1754 1922 2088 2279 2279 1474 1701 1903 2070 2271 1706 1924 2139 2284 2573 2808 2610 3025 3165 3529 3559

940 1066 1215 1399 1558 1643 1645 1672 1666 1666 1144 1292 1445 1595 1765 1282 1432 1570 1697 1943 2110 2337 2270 2415 2522 2545 2605 1429 1626 1820 1993 2184 2373 2590 2590 1675 1933 2162 2352 2581 1939 2186 2431 2596 2923 3191 2966 3438 3597 4010 4044

Matched StRENgth

Outside Diameter

Critical Section Area

Tensile Efficiency

Outside Diameter

in

sq in

%

in

8.125 8.125 8.125 8.125 8.125 8.125 8.125 — — — 9.125 9.125 9.125 9.125 9.125 10.125 10.125 10.125 10.125 10.125 10.125 10.125 — — — — — 11.250 11.250 11.250 11.250 11.250 11.250 11.250 11.250 — — — — — — — — — — — — — — — —

8.274 8.274 8.274 8.274 8.274 8.274 8.274 — — — 9.467 9.467 9.467 9.467 9.467 10.545 10.545 10.545 10.545 10.545 10.545 10.545 — — — — — 11.759 11.759 11.759 11.759 11.759 11.759 11.759 11.759 — — — — — — — — — — — — — — — —

100 96.9 85.1 73.9 66.3 63.0 60.2 — — — 100 91.6 81.9 74.2 67.1 100 92.1 84.0 77.7 67.8 62.5 55.8 — — — — — 100 90.4 80.8 73.7 67.3 61.9 55.3 53.2 — — — — — — — — — — — — — — — —

8.125 8.147 8.238 8.351 8.448 8.499 8.544 8.630 8.675 8.697 9.125 9.186 9.271 9.353 9.445 10.108 10.183 10.252 10.315 10.436 10.517 10.638 10.816 10.884 10.933 10.944 10.972 11.250 11.322 11.409 11.486 11.571 11.653 11.778 11.823 12.288 12.394 12.488 12.565 — 13.917 14.007 14.095 14.155 14.389 14.599 14.635 14.798 14.853 14.994 15.006

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING CONNECTIONS

HW™ 5" to 14"

103

. Flat crested thread parallel to pipe axis

1

helps correct misalignment during make-up.

1

. 100% internal pressure rated metal to

2

metal radial seal and internal shoulder maintains gas sealability under high axial loads.

2

. Specially designed for medium to featureS

heavy wall pipes. Suitable for salt dome applications.

. Intermediate casing . High pressure and heavy wall casing APPLICATIONS

104

. Special clearance . Special bevel OPTIONS

HW™

5" TO 9 5/8" (10 3/4" TO 14" on reverse side)

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

26.70 29.20 31.60 34.00 28.40 29.70 32.00 32.60 35.30 36.40 38.00 40.50 43.10 34.50 36.70 40.20 43.70 46.00 47.10 50.40 38.00 41.00 42.70 44.00 46.00 46.40 49.50 50.10 53.60 57.10 42.80 45.30 47.10 51.20 52.80 55.30 59.20 49.00 49.10 52.00 54.00 58.70 63.50 68.10 58.40 59.40 61.10 64.90 70.30 75.60 80.80

0.562 0.625 0.687 0.750 0.530 0.562 0.612 0.625 0.687 0.705 0.750 0.812 0.875 0.525 0.562 0.625 0.687 0.730 0.750 0.812 0.540 0.590 0.625 0.640 0.670 0.687 0.730 0.750 0.812 0.875 0.562 0.595 0.625 0.687 0.712 0.750 0.812 0.557 0.562 0.595 0.625 0.687 0.750 0.812 0.595 0.609 0.625 0.672 0.734 0.797 0.859

3.876 3.750 3.626 3.500 4.440 4.376 4.276 4.250 4.126 4.090 4.000 3.876 3.750 5.575 5.502 5.375 5.251 5.165 5.125 5.002 5.920 5.820 5.750 5.720 5.660 5.626 5.540 5.500 5.376 5.250 6.502 6.435 6.375 6.251 6.202 6.125 6.002 7.511 7.502 7.435 7.375 7.251 7.125 7.002 8.435 8.407 8.375 8.281 8.157 8.031 7.907

3.751 3.625 3.501 3.375 4.315 4.251 4.151 4.125 4.001 3.965 3.875 3.751 3.625 5.450 5.376 5.250 5.126 5.040 5.000 4.876 5.794* 5.694 5.625 5.595 5.535 5.501 5.415 5.375 5.251 5.125 6.376 6.310* 6.250 6.126 6.076 6.000 5.876 7.386 7.376 7.310 7.250 7.126 7.000 6.876 8.279* 8.251 8.219 8.125 8.001 7.875 7.751

11.811 11.811 11.811 11.811 12.244 12.244 12.244 12.244 12.244 12.244 12.244 12.244 12.244 12.362 12.362 12.362 12.362 12.362 12.362 12.362 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.402 12.480 12.480 12.480 12.480 12.480 12.480 12.480 12.559 12.559 12.559 12.559 12.559 12.559 12.559 13.071 13.071 13.071 13.071 13.071 13.071 13.071

3.996 3.886 3.776 3.657 4.524 4.484 4.406 4.382 4.272 4.240 4.161 4.051 3.933 5.650 5.610 5.516 5.406 5.327 5.287 5.117 6.024 5.945 5.890 5.866 5.811 5.780 5.701 5.669 5.551 5.433 6.610 6.571 6.516 6.406 6.366 6.295 6.185 7.610 7.602 7.571 7.524 7.413 7.295 7.185 8.547 8.547 8.531 8.445 8.335 8.217 8.106

5.406 5.406 5.406 5.406 5.630 5.630 5.630 5.630 5.630 5.630 5.630 5.630 5.630 5.684 5.684 5.684 5.684 5.684 5.684 5.684 5.702 5.702 5.702 5.702 5.702 5.702 5.702 5.702 5.702 5.702 5.732 5.732 5.732 5.732 5.732 5.732 5.732 5.780 5.780 5.780 5.780 5.780 5.780 5.780 6.028 6.028 6.028 6.028 6.028 6.028 6.028

8.384 9.192 9.960 10.715 8.854 9.329 10.055 10.241 11.115 11.363 11.975 12.794 13.603 10.766 11.448 12.605 13.711 14.466 14.810 15.861 11.729 12.716 13.394 13.683 14.258 14.579 15.384 15.757 16.890 18.016 13.338 14.055 14.710 16.021 16.540 17.332 18.591 15.106 15.226 16.061 16.805 18.330 19.852 21.319 18.061 18.456 18.905 20.223 21.931 23.645 25.310

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

5

5 1/2

TSH / PCC / Version 01 / March 2009

Options

6 5/8

7

7 5/8

8 5/8

9 5/8

Coupling

5.650 5.772 5.874 5.976 6.094 6.146 6.232 6.256 6.362 6.390 6.465 6.567 6.669 7.390 7.390 7.390 7.504 7.579 7.614 7.720 7.656 7.717 7.772 7.799 7.850 7.878 7.957 7.992 8.098 8.213 8.500 8.500 8.500 8.512 8.559 8.626 8.736 9.625 9.625 9.625 9.625 9.625 9.625 9.744 10.625 10.625 10.625 10.625 10.625 10.705 10.815

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Special Clearance Coupling 110 ksi

125 ksi

x 1000 lb

431 472 512 551 455 480 517 526 571 584 616 658 699 553 588 648 705 744 761 815 603 653 688 703 733 749 791 810 868 926 685 723 756 824 850 891 955 776 782 826 864 942 1021 1096 928 949 972 1040 1128 1216 1301

627 687 745 801 662 697 752 766 831 850 895 957 1017 805 856 942 1025 1082 1107 1186 877 950 1001 1023 1066 1090 1150 1178 1263 1347 997 1051 1100 1198 1236 1296 1390 1129 1138 1201 1257 1371 1484 1594 1350 1380 1414 1512 1640 1768 1892

705 773 838 901 745 785 846 861 935 956 1007 1076 1144 905 963 1060 1153 1217 1246 1334 986 1069 1127 1151 1199 1226 1294 1325 1421 1515 1121 1183 1237 1348 1391 1458 1563 1271 1280 1351 1414 1542 1670 1793 1519 1552 1590 1701 1845 1989 2129

744 816 884 951 786 828 893 909 987 1009 1063 1136 1208 956 1016 1119 1218 1284 1315 1408 1041 1129 1189 1215 1266 1294 1366 1399 1500 1600 1184 1248 1306 1423 1468 1539 1650 1341 1351 1426 1492 1628 1763 1892 1604 1639 1679 1796 1948 2100 2247

862 945 1024 1102 910 959 1034 1053 1143 1168 1231 1315 1399 1107 1177 1296 1410 1487 1523 1630 1206 1307 1377 1407 1466 1499 1582 1620 1736 1852 1371 1445 1512 1647 1700 1782 1911 1553 1565 1651 1728 1885 2041 2191 1857 1897 1944 2079 2255 2431 2602

979 1074 1164 1252 1034 1090 1175 1197 1298 1328 1399 1495 1589 1258 1337 1473 1602 1690 1730 1853 1370 1485 1565 1598 1665 1703 1797 1841 1973 2105 1558 1643 1718 1872 1932 2025 2171 1765 1778 1876 1964 2142 2319 2490 2110 2156 2209 2363 2563 2763 2957

Outside Diameter

Critical Section Area

Tensile Efficiency

in

sq in

%

5.409 5.480 5.543 5.610 5.854 5.894 5.953 5.969 6.035 6.055 6.102 6.165 6.228 6.988 7.035 7.110 7.185 7.236 7.256 7.327 7.382 7.445 7.488 7.508 7.543 7.563 7.614 7.638 7.709 7.780 8.043 8.083 8.122 8.197 8.228 8.276 8.346 9.043 9.047 9.091 9.130 9.209 9.287 9.362 10.075 10.094 10.114 10.177 10.256 10.335 10.413

6.273 6.880 7.425 8.012 6.608 6.977 7.525 7.676 8.297 8.486 8.936 9.543 10.156 8.055 8.572 9.405 10.249 10.825 11.053 11.865 8.764 9.497 10.001 10.238 10.652 10.889 11.496 11.783 12.639 13.504 9.990 10.497 10.993 11.955 12.355 12.977 13.891 11.326 11.383 12.009 12.567 13.707 14.840 15.937 13.507 13.807 14.125 15.130 16.396 17.675 18.946

80.1 80.1 79.8 80.0 79.9 80.0 80.1 80.2 79.9 79.9 79.8 79.8 79.9 80.1 80.1 79.8 80.0 80.1 79.8 80.1 80.0 79.9 79.9 80.1 79.9 79.9 79.9 80.0 80.1 80.2 80.2 79.9 80.0 79.8 80.0 80.1 80.0 80.2 80.0 80.0 80.0 80.0 80.0 80.0 80.0 80.0 79.9 80.0 80.0 80.0 80.1

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection.

105

HW™

10 3/4" TO 14"

Options

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

6.082 6.082 6.082 6.082 6.082 6.238 6.238 6.238 6.238 6.238 6.238

20.307 22.766 24.709 26.660 28.563 27.027 29.170 31.296 33.406 35.497 37.574

100 100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

10 3/4

14

65.70 73.20 79.20 85.30 91.20 86.00 93.00 100.00 106.00 112.00 120.00

0.595 0.672 0.734 0.797 0.859 0.600 0.650 0.700 0.750 0.800 0.850

9.560 9.406 9.282 9.156 9.032 12.800 12.700 12.600 12.500 12.400 12.300

Coupling

9.404* 9.250 9.126 9.000 8.876 12.613 12.513 12.413 12.313 12.213 12.113

11.750 11.750 11.750 11.839 11.949 14.843 14.843 14.953 15.043 15.130 15.220

13.150 13.150 13.150 13.150 13.150 13.465 13.465 13.465 13.465 13.465 13.465

9.669 9.567 9.449 9.331 9.236 12.921 12.874 12.787 12.693 12.606 12.512

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection.

106

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Special Clearance Coupling 110 ksi

125 ksi

x 1000 lb

1044 1170 1270 1371 1468 1389 1499 1609 1717 1825 1931

1519 1702 1848 1994 2135 2021 2181 2340 2498 2654 2809

1708 1915 2079 2243 2402 2273 2454 2632 2810 2986 3160

1803 2021 2194 2367 2536 2400 2590 2779 2966 3152 3336

2088 2340 2541 2741 2936 2778 2999 3217 3434 3649 3863

2373 2660 2887 3115 3337 3157 3408 3656 3902 4147 4389

Outside Diameter

Critical Section Area

Tensile Efficiency

in

sq in

%

11.205 11.307 11.390 11.469 11.547 14.472 14.543 14.614 14.681 14.752 14.819

15.221 17.024 18.504 19.922 21.333 20.164 21.782 23.408 24.950 26.590 28.147

80.2 80.0 80.1 79.9 79.9 79.8 79.9 80.0 79.9 80.2 80.2

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING CONNECTIONS

ER™ 7" to 24 1/2"

107

. Improved running efficiency in large

1

diameter casing provided by low TPI thread design and increased taper.

1

. Pin nose shoulder and thread profile

2

provide high torque and 100% compression strength.

2

. Easy stabbing, fast make-up with no featureS

cross threading risk.

. Surface casing . Drilling with casing APPLICATIONS

108

. Matched strength . Special clearance . Special bevel OPTIONS

ER™

7" TO 15" (16" TO 24 1/2" on reverse side)

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

9.517 9.517 9.517 9.517 9.517 9.517 9.517 9.517 9.517 17.095 17.095 17.095 17.095 17.095 17.095 17.095 17.095 17.095 17.095 19.015 19.015 19.015 19.015 19.015 19.015 19.015 19.015 19.015 18.654 13.006 21.051 21.051 21.051 21.051 20.872 26.091 26.091 26.091 26.091 26.330 26.569 26.569 30.597 30.597 30.597 30.597 30.597 30.597 34.089

100 100 100 100 94 87 80 74 71 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 87 100 100 100 95 95 92 100

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

7

TSH / PCC / Version 01 / March 2009

Options

8 5/8

9 5/8

9 7/8 10 3/4

11 7/8 13 3/8

13 1/2 13 5/8 14

15

23.00 26.00 29.00 32.00 35.00 38.00 41.00 44.00 46.00 24.00 28.00 32.00 36.00 40.00 44.00 49.00 52.00 54.00 58.70 36.00 40.00 43.50 47.00 53.50 58.40 59.40 61.10 64.90 62.80 45.50 51.00 55.50 60.70 65.70 71.80 54.50 61.00 68.00 72.00 80.40 88.20 105.00 82.50 94.80 99.30 110.00 111.00 114.00 109.00

0.317 0.362 0.408 0.453 0.498 0.540 0.590 0.640 0.670 0.264 0.304 0.352 0.400 0.450 0.500 0.557 0.595 0.625 0.687 0.352 0.395 0.435 0.472 0.545 0.595 0.609 0.625 0.672 0.625 0.400 0.450 0.495 0.545 0.595 0.582 0.380 0.430 0.480 0.514 0.576 0.625 0.760 0.562 0.656 0.688 0.772 0.779 0.800 0.715

6.366 6.276 6.184 6.094 6.004 5.920 5.820 5.720 5.660 8.097 8.017 7.921 7.825 7.725 7.625 7.511 7.435 7.375 7.251 8.921 8.835 8.755 8.681 8.535 8.435 8.407 8.375 8.281 8.625 9.950 9.850 9.760 9.660 9.560 10.711 12.615 12.515 12.415 12.347 12.348 12.375 12.106 12.876 12.688 12.624 12.456 12.442 12.400 13.570

Coupling

6.241* 6.151 6.059* 5.969* 5.879 5.794* 5.694 5.594 5.535 7.972 7.892 7.796* 7.700 7.600* 7.500 7.386 7.310 7.250 7.126 8.765 8.679* 8.599* 8.525 8.379* 8.279* 8.251 8.219 8.125 8.469 9.794* 9.694 9.604* 9.504 9.404* 10.555* 12.459 12.359 12.259 12.191* 12.161* 12.187* 11.918 12.689 12.501 12.436 12.269 12.254* 12.213 13.383

7.657 7.657 7.657 7.657 7.657 7.657 7.657 7.657 7.657 9.626 9.626 9.626 9.626 9.626 9.626 9.626 9.626 9.626 9.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.827 11.748 11.748 11.748 11.748 11.748 12.756 14.374 14.374 14.374 14.374 14.500 14.626 14.626 15.000 15.000 15.000 15.000 15.000 15.000 16.000

10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 12.205

6.398 6.339 6.272 6.232 6.193 6.161 6.122 6.083 6.083 8.051 8.008 7.980 7.882 7.846 7.807 7.764 7.717 7.717 7.646 8.972 8.890 8.839 8.807 8.748 8.705 8.705 8.689 8.654 9.055 9.980 9.980 9.980 9.764 9.764 10.866 12.689 12.559 12.559 12.559 12.559 12.598 12.402 12.996 12.874 12.874 12.795 12.795 12.756 13.602

4.409 4.409 4.409 4.409 4.409 4.409 4.409 4.409 4.409 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 5.512

Special Clearance Coupling

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

x 1000 lb

366 415 465 512 523 523 523 523 523 381 437 503 568 636 702 776 826 864 942 564 630 691 746 855 928 949 972 1040 999 715 801 877 961 1044 1136 853 962 1069 1142 1286 1404 1461 1305 1513 1583 1683 1683 1683 1765

532 604 676 745 761 761 761 761 761 555 636 732 827 925 1021 1129 1201 1257 1371 820 916 1005 1086 1244 1350 1380 1414 1512 1453 1040 1165 1276 1398 1519 1652 1241 1399 1556 1661 1871 2042 2126 1898 2200 2302 2448 2448 2448 2567

599 679 760 839 857 857 857 857 857 624 715 823 930 1040 1149 1271 1351 1414 1542 923 1031 1130 1222 1399 1519 1552 1590 1701 1635 1171 1311 1435 1573 1708 1858 1396 1574 1750 1869 2105 2297 2391 2135 2475 2590 2754 2754 2754 2888

632 717 803 885 904 904 904 904 904 659 755 869 982 1098 1212 1341 1426 1492 1628 974 1088 1193 1289 1477 1604 1639 1679 1796 1726 1236 1383 1515 1660 1803 1962 1474 1661 1847 1973 2222 2425 2524 2254 2613 2733 2907 2907 2907 3048

732 830 929 1025 1047 1047 1047 1047 1047 763 874 1006 1137 1271 1404 1553 1651 1728 1885 1128 1260 1381 1493 1710 1857 1897 1944 2079 1998 1431 1602 1754 1922 2088 2271 1706 1924 2139 2284 2573 2808 2923 2610 3025 3165 3366 3366 3366 3530

832 944 1056 1165 1190 1190 1190 1190 1190 867 993 1144 1292 1445 1595 1765 1876 1964 2142 1282 1432 1570 1697 1943 2110 2156 2209 2363 2271 1626 1820 1993 2184 2373 2581 1939 2186 2431 2596 2923 3191 3321 2966 3438 3597 3825 3825 3825 4011

Matched StRENgth

Outside Diameter

Critical Section Area

Tensile Efficiency

Outside Diameter

in

sq in

%

in

7.375 7.375 7.375 7.375 7.375 7.375 7.375 7.375 7.375 9.125 9.125 9.125 9.125 9.125 9.125 9.125 9.125 9.125 9.125 10.125 10.125 10.125 10.125 10.125 10.125 10.125 10.125 10.125 — 11.250 11.250 11.250 11.250 11.250 — — — — — — — — — — — — — — —

6.181 6.181 6.181 6.181 6.181 6.181 6.181 6.181 6.181 9.720 9.720 9.720 9.720 9.720 9.720 9.720 9.720 9.720 9.720 10.853 10.853 10.853 10.853 10.853 10.853 10.853 10.853 10.853 — 12.056 12.056 12.056 12.056 12.056 — — — — — — — — — — — — — — —

92.9 81.9 73.2 66.3 60.8 56.4 52.0 48.3 46.4 100 100 100 94.0 84.1 76.2 68.8 64.8 61.9 56.7 100 94.8 86.4 80.0 69.8 64.3 62.9 61.4 57.4 — 92.7 82.8 75.6 69.0 63.5 — — — — — — — — — — — — — — —

7.415 7.492 7.568 7.640 7.711 7.776 7.851 7.924 7.967 9.125 9.125 9.125 9.168 9.252 9.335 9.427 9.487 9.533 9.628 10.125 10.163 10.232 10.295 10.416 10.497 10.520 10.545 10.619 10.802 11.304 11.391 11.468 11.552 11.635 — 13.898 13.988 14.077 14.136 14.370 14.599 14.824 14.706 14.868 14.922 — — — —

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.

109

ER™

16" TO 24 1/2"

Options

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

Outside Diameter

Length

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

lb/ft

in

in

in

in

in

in

in

sq in

%

%

0.375 0.438 0.495 0.562 0.656 0.715 0.781 0.435 0.468 0.485 0.500 0.579 0.594 0.636 0.693 0.720 0.438 0.500 0.563 0.625 0.635 0.709 0.750 0.812 1.000 0.625 0.781 1.000 0.625 0.635 0.688 0.500 0.531 0.625 0.635 0.709

15.250 15.124 15.010 14.876 14.688 14.570 14.438 17.755 17.689 17.655 17.625 17.467 17.437 17.354 17.239 17.185 19.124 19.000 18.874 18.750 18.730 18.582 18.500 18.376 18.000 20.750 20.438 20.000 22.750 22.730 22.624 23.500 23.438 23.250 23.230 23.082

15.062 14.936 14.823 14.689* 14.501 14.383 14.250 17.568 17.502 17.468* 17.438 17.280 17.250 17.166 17.052 16.998 18.936 18.813 18.687 18.562 18.543 18.394 18.313 18.189 17.813 20.500 20.188 19.750 22.562 22.543 22.436 23.250 23.188 23.000 22.980 22.832

9.646 9.646 10.626 10.626 10.626 12.205 12.205 9.646 9.646 9.646 10.626 10.626 10.626 10.626 10.626 12.205 9.646 10.626 10.626 10.626 10.626 10.626 10.626 10.626 10.626 12.205 12.205 12.205 10.626 10.626 10.626 9.646 10.626 10.626 10.626 10.626

15.252 15.118 15.020 14.961 14.902 14.744 14.705 17.803 17.764 17.764 17.657 17.579 17.579 17.559 17.559 17.323 19.177 19.012 18.965 18.917 18.917 18.858 18.827 18.787 18.701 20.906 20.689 20.394 22.906 22.906 22.866 23.638 23.488 23.417 23.417 23.417

4.232 4.232 4.724 4.724 4.724 5.512 5.512 4.232 4.232 4.232 4.724 4.724 4.724 4.724 4.724 5.512 4.232 4.724 4.724 4.724 4.724 4.724 4.724 4.724 4.724 5.512 5.512 5.512 4.724 4.724 4.724 4.232 4.724 4.724 4.724 4.724

33.356 33.356 34.870 34.870 34.870 37.281 37.281 50.353 50.353 50.353 52.120 52.120 52.120 52.120 52.120 54.937 41.516 43.417 43.417 43.417 43.417 43.417 43.417 43.417 43.417 55.735 55.735 55.735 51.964 51.964 51.964 54.329 56.665 56.665 56.665 56.665

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 96 89 73 100 100 84 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Pipe Body

Designation

16

18 5/8

20

22

24

24 1/2

65.00 75.00 84.00 94.50 109.00 118.00 128.00 87.50 94.50 96.50 99.00 114.00 115.00 126.00 136.00 139.00 94.00 106.50 118.50 131.50 133.00 147.00 156.00 169.00 209.00 146.50 180.00 226.00 159.20 162.00 174.00 133.00 140.00 162.00 165.00 182.00

Coupling

17.000 17.000 17.000 17.000 17.000 17.000 17.000 20.000 20.000 20.000 20.000 20.000 20.000 20.000 20.000 20.000 21.000 21.000 21.000 21.000 21.000 21.000 21.000 21.000 21.000 23.130 23.130 23.130 25.000 25.000 25.000 25.591 25.591 25.591 25.591 25.591

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift (Special Drift). . Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . Torque recommendation values available at www.tenaris.com/tenarishydril. . Compression efficiency for SC option is the same as the standard connection. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.

110

Special Clearance Coupling

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

x 1000 lb

1012 1178 1326 1499 1739 1888 2054 1367 1468 1520 1566 1805 1851 1975 2147 2228 1480 1685 1891 2092 2125 2363 2269 2388 2397 2308 2863 3048 2524 2564 2771 2073 2199 2578 2618 2915

1473 1713 1929 2181 2530 2747 2987 1989 2136 2211 2278 2626 2692 2873 3123 3240 2153 2450 2750 3043 3091 3437 3300 3473 3486 3358 4165 4433 3672 3729 4031 3016 3199 3750 3809 4239

1657 1927 2170 2453 2846 3090 3361 2237 2403 2488 2562 2954 3028 3232 3514 3645 2423 2757 3094 3424 3477 3867 3712 3907 3922 3777 4686 4988 4131 4195 4535 3393 3599 4219 4285 4769

1749 2034 2291 2589 3004 3262 3547 2362 2536 2626 2705 3118 3197 3412 3709 3848 2557 2910 3266 3614 3670 4082 3919 4125 4140 3987 4946 5265 4360 4428 4787 3581 3799 4453 4523 5034

2025 2355 2652 2998 3478 3777 4108 2734 2937 3040 3132 3611 3701 3951 4294 4455 2961 3369 3782 4185 4249 4727 4537 4776 4793 4617 5727 6096 5049 5127 5543 4147 4398 5157 5237 5829

2301 2677 3014 3407 3953 4292 4668 3107 3337 3455 3559 4103 4206 4489 4880 5063 3365 3829 4297 4755 4829 5371 5156 5427 5447 5246 6508 6927 5737 5826 6298 4712 4998 5860 5951 6624

Matched StRENgth

Outside Diameter

Critical Section Area

Tensile Efficiency

Outside Diameter

in

sq in

%

in

— — 16.405 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — 19.266 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — 79.9 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— 16.547 16.592 16.712 16.878 16.980 17.092 19.171 19.232 19.263 19.232 19.376 19.403 19.478 19.579 19.627 20.553 20.609 20.724 20.837 20.854 20.987 21.059 — — 22.748 23.031 23.409 — — — 25.174 25.172 25.346 25.364 25.499

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

TUBING CONNECTIONS

PJD™ 2 3/8" to 5"

111

. Rugged primary external torque shoulder

1

designed for high torque resistance.

1

. Optimized modified buttress thread

2

design provides easy stabbing and trouble-free make-up.

2

. Double torque shoulder engagement

3

promotes low stress along thread profile providing high fatigue resistance.

3

. Streamlined, clearance OD facilitates featureS

.

112

running, pulling, and circulating and eliminates coupling face hang-up. 100% pipe body performance in tension, compression, bending, internal and external pressure.

. Production tubing and workstrings . Drilling with casing . Drilling with tubing APPLICATIONS

. CB ring

OPTIONS

PJD™

2 3/8" TO 5" Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

in

in

in

sq in

%

%

1.901 1.845 1.774 2.348 2.230 2.166 2.101 2.867 2.797 2.625 3.351 3.215 3.833 3.794 3.701 4.283 4.151 4.031

2.795 2.795 2.913 3.307 3.425 3.484 3.543 4.000 4.000 4.291 4.469 4.528 4.961 4.961 5.079 5.472 5.567 5.669

1.941 1.886 1.811 2.386 2.268 2.205 2.142 2.925 2.854 2.685 3.409 3.276 3.894 3.854 3.760 4.343 4.209 4.091

2.362 2.362 2.362 2.756 2.756 2.756 2.756 3.228 3.228 3.228 3.543 3.543 3.937 3.937 3.937 4.134 4.134 4.134

1.325 1.494 1.714 1.838 2.275 2.499 2.717 2.688 3.013 3.757 3.191 3.900 3.718 3.960 4.529 4.521 5.422 6.191

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

4.70 5.30 5.95 6.50 7.90 8.70 9.60 9.30 10.30 12.95 11.00 13.40 12.75 13.50 15.50 15.00 18.00 21.00

0.190 0.218 0.254 0.217 0.276 0.308 0.340 0.254 0.289 0.375 0.262 0.330 0.271 0.290 0.337 0.296 0.362 0.422

1.995 1.939 1.867 2.441 2.323 2.259 2.195 2.992 2.922 2.750 3.476 3.340 3.958 3.920 3.826 4.408 4.276 4.156

2 7/8

3 1/2 TSH / PCC / Version 01 / March 2009

Connection Inside Diameter

Nominal Weight

2 3/8

4 4 1/2

5

BOx Outside Diameter

Pipe Body

Designation Size

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

124 140 161 172 214 236 257 246 277 350 292 361 342 364 419 416 501 577

143 162 186 199 248 273 298 285 321 405 338 419 396 422 485 481 580 668

163 185 212 227 282 310 338 324 364 460 385 476 450 479 551 547 659 759

x 1000 lb

72 81 93 100 124 137 149 142 160 202 169 209 198 211 242 241 290 334

104 118 135 145 180 199 217 207 233 295 246 304 288 307 353 350 422 486

117 133 152 163 203 224 244 233 262 331 277 342 324 345 397 394 475 546

. Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for connection correspond to the lighter weight (For more information consult TenarisHydril Running Manual). . the Torque recommendation values available at www.tenaris.com/tenarishydril.

113

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING CONNECTIONS

SLX™ 4 1/2" to 13 5/8"

115

1

. Clearance OD 1.5–2% larger than

1

specified pipe body OD (0.5–1% larger than API maximum) permits use in clearance situations.

. 100% collapse rating provided by the

2

sliding metal to metal seal. This seal also functions as a secondary internal pressure seal.

2

. 100% pipe body rated gas sealing,

3

internal pressure energized, metal to metal seal.

3

. Triaxial performance achieved by featureS

.

116

machining pin and box on formed ends increasing both tension and combined load performance. Patented seal saver protects the pin seal from handling damage and acts as a stiffener to improve metal seal functioning.

. Intermediate casing . Production casing and tie-backs . HP/HT and deep wells APPLICATIONS

SLX™

4 1/2" TO 9 5/8" (9 3/4" TO 13 5/8" on reverse side) Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

in

in

in

sq in

%

%

3.833 3.795 3.701 3.615 3.515 3.375 4.283 4.151 4.059 4.031 4.001 3.919 3.875 4.767 4.653 4.545 4.423 * 4.375 5.840 5.796 5.776 5.666 5.550 6.241 * 6.151 6.059 * 5.969 * 5.879 5.795 * 5.695 5.625 6.844 6.750 6.640 6.500 6.376 6.310 6.250 6.435 * 6.345 * 6.201 * 7.700 7.600 7.500 7.386 7.310 7.250 8.599 * 8.525 8.379 * 8.279 *

4.584 4.588 4.597 4.605 4.615 4.629 5.092 5.105 5.114 5.117 5.119 5.128 5.132 5.598 5.608 5.619 5.631 5.635 6.736 6.740 6.742 6.752 6.763 7.111 7.120 7.128 7.153 7.145 7.169 7.163 7.200 7.743 7.752 7.762 7.775 7.787 7.793 7.799 7.937 7.945 7.995 8.764 8.773 8.782 8.793 8.801 8.806 9.778 9.784 9.821 9.830

3.880 3.840 3.746 3.661 3.560 3.420 4.328 4.196 4.104 4.076 4.046 3.964 3.920 4.812 4.698 4.590 4.534 4.420 5.890 5.841 5.826 5.711 5.595 6.286 6.196 6.160 6.035 5.924 5.910 5.740 5.675 6.889 6.795 6.685 6.545 6.421 6.355 6.295 6.535 6.410 6.295 7.745 7.645 7.545 7.450 7.355 7.295 8.675 8.601 8.535 8.445

4.15 4.15 4.49 4.92 4.92 5.48 4.49 4.49 4.92 4.92 4.92 5.29 5.29 4.40 4.40 5.02 5.17 5.17 4.41 4.41 4.41 5.18 5.18 4.41 4.41 4.93 4.93 5.80 5.80 5.97 5.97 4.72 4.72 5.49 5.49 5.97 5.97 6.16 6.16 6.16 6.16 5.19 5.19 5.80 5.80 6.17 6.17 5.32 5.32 5.45 5.45

72.3 73.8 72.8 73.4 78.8 80.4 71.9 70.1 78.1 78.7 79.2 79.0 79.7 71.9 71.0 77.7 76.3 78.7 63.6 66.6 67.4 77.9 79.3 73.3 74.2 76.5 79.5 80.7 81.8 82.2 82.1 74.1 74.4 78.4 79.2 81.6 82.3 82.3 81.6 79.9 75.0 73.3 75.7 76.8 79.4 79.0 79.7 74.1 75.7 77.6 76.9

36.1 36.9 36.4 36.7 39.4 40.2 36.0 35.0 39.1 39.3 39.6 39.5 39.8 36.0 35.5 38.8 38.2 39.3 31.8 33.3 33.7 38.9 39.7 36.7 37.1 38.2 39.8 40.3 40.9 41.1 41.1 37.0 37.2 39.2 39.6 40.8 41.2 41.1 40.8 39.9 37.5 36.6 37.8 38.4 39.7 39.5 39.9 37.1 37.9 38.8 38.4

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

12.60 13.50 15.10 17.00 18.80 21.60 15.00 18.00 20.30 20.80 21.40 23.20 24.10 17.00 20.00 23.00 26.00 26.80 22.60 24.00 24.60 28.00 32.00 23.00 26.00 29.00 32.00 35.00 38.00 41.00 42.70 26.40 29.70 33.70 39.00 42.80 45.30 47.10 46.10 48.60 54.20 36.00 40.00 44.00 49.00 52.00 54.00 43.50 47.00 53.50 58.40

0.271 0.290 0.337 0.380 0.430 0.500 0.296 0.362 0.408 0.422 0.437 0.478 0.500 0.304 0.361 0.415 0.476 0.500 0.330 0.352 0.362 0.417 0.475 0.317 0.362 0.408 0.453 0.498 0.540 0.590 0.625 0.328 0.375 0.430 0.500 0.562 0.595 0.625 0.595 0.640 0.712 0.400 0.450 0.500 0.557 0.595 0.625 0.435 0.472 0.545 0.595

3.958 3.920 3.826 3.740 3.640 3.500 4.408 4.276 4.184 4.156 4.126 4.044 4.000 4.892 4.778 4.670 4.548 4.500 5.965 5.921 5.901 5.791 5.675 6.366 6.276 6.184 6.094 6.004 5.920 5.820 5.750 6.969 6.875 6.765 6.625 6.501 6.435 6.375 6.560 6.470 6.326 7.825 7.725 7.625 7.511 7.435 7.375 8.755 8.681 8.535 8.435

4 1/2

5

TSH / PCC / Version 01 / March 2009

BOx Outside Diameter

Pipe Body

Designation Size

5 1/2

6 5/8

7

7 5/8

7 3/4

8 5/8

9 5/8

2.602 2.832 3.207 3.612 4.330 5.054 3.147 3.697 4.599 4.775 4.963 5.364 5.632 3.568 4.136 5.151 5.733 6.181 4.149 4.622 4.803 6.333 7.280 4.879 5.603 6.463 7.409 8.205 8.961 9.770 10.279 5.570 6.358 7.624 8.861 10.174 10.819 11.310 10.917 11.421 11.805 7.575 8.745 9.803 11.204 11.852 12.523 9.310 10.281 12.062 12.974

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

247 269 305 343 411 480 299 351 437 454 471 510 535 339 393 489 545 587 394 439 456 602 692 464 532 614 704 779 851 928 977 529 604 724 842 967 1028 1074 1037 1085 1121 720 831 931 1064 1126 1190 884 977 1146 1233

286 312 353 397 476 556 346 407 506 525 546 590 620 392 455 567 631 680 456 508 528 697 801 537 616 711 815 903 986 1075 1131 613 699 839 975 1119 1190 1244 1201 1256 1299 833 962 1078 1232 1304 1378 1024 1131 1327 1427

325 354 401 452 541 632 393 462 575 597 620 671 704 446 517 644 717 773 519 578 600 792 910 610 700 808 926 1026 1120 1221 1285 696 795 953 1108 1272 1352 1414 1365 1428 1476 947 1093 1225 1401 1482 1565 1164 1285 1508 1622

x 1000 lb

143 156 176 199 238 278 173 203 253 263 273 295 310 196 227 283 315 340 228 254 264 348 400 268 308 355 407 451 493 537 565 306 350 419 487 560 595 622 600 628 649 417 481 539 616 652 689 512 565 663 714

208 227 257 289 346 404 252 296 368 382 397 429 451 285 331 412 459 494 332 370 384 507 582 390 448 517 593 656 717 782 822 446 509 610 709 814 866 905 873 914 944 606 700 784 896 948 1002 745 822 965 1038

234 255 289 325 390 455 283 333 414 430 447 483 507 321 372 464 516 556 373 416 432 570 655 439 504 582 667 738 806 879 925 501 572 686 797 916 974 1018 983 1028 1062 682 787 882 1008 1067 1127 838 925 1086 1168

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift. . Interchangeable where bracketed. . Torque recommendation values available at www.tenaris.com/tenarishydril.

117

SLX™

9 3/4" TO 13 5/8"

Designation

Pipe Body

Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

in

59.20 62.80 65.10 66.95 68.42 51.00 55.50 60.70 65.70 60.00 65.00 71.00 71.80 74.80 78.10 68.00 72.00 77.00 80.70 85.00 86.00 81.40 88.20

0.595 0.625 0.650 0.672 0.688 0.450 0.495 0.545 0.595 0.489 0.534 0.582 0.582 0.615 0.640 0.480 0.514 0.550 0.580 0.608 0.625 0.580 0.625

9 3/4 9 7/8 10 10 3/4

11 3/4

11 7/8 12 12 1/16 13 3/8

13 1/2 13 5/8

8.560 8.625 8.575 8.656 8.624 9.850 9.760 9.660 9.560 10.772 10.682 10.586 10.711 10.770 10.783 12.415 12.347 12.275 12.215 12.159 12.125 12.340 12.375

8.404* 8.469* 8.419* 8.500* 8.468* 9.694 9.604 9.504 9.404* 10.616* 10.526* 10.430 10.555* 10.614* 10.625 12.259 12.191* 12.119 12.059 12.003 11.969 12.152* 12.187*

BOx Outside Diameter

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

in

in

sq in

%

%

6.22 6.22 6.22 6.22 6.22 5.46 5.46 5.83 5.83 5.63 5.63 5.63 5.83 5.83 5.83 5.64 5.64 5.64 6.30 6.30 6.30 5.64 6.30

12.953 14.358 15.091 15.091 15.091 10.765 12.092 13.397 14.844 12.548 14.000 15.656 14.940 17.165 17.365 14.024 15.289 16.774 17.687 18.698 19.333 18.039 19.506

75.7 79.1 80.1 76.6 75.0 73.9 75.8 76.7 78.2 72.5 74.4 76.7 72.4 78.0 75.6 72.1 73.6 75.7 75.9 76.7 77.2 76.6 76.4

37.8 39.5 40.1 38.3 37.5 37.0 37.9 38.3 39.1 36.3 37.2 38.3 38.0 39.0 37.8 36.1 36.8 37.8 37.9 38.3 38.6 38.3 38.2

9.956 10.065 10.065 10.100 10.150 10.914 10.922 10.931 10.966 11.928 11.965 11.975 12.000 12.204 12.272 13.564 13.602 13.609 13.614 13.619 13.622 13.740 13.875

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift. . Interchangeable where bracketed. . Torque recommendation values available at www.tenaris.com/tenarishydril.

118

8.570 8.535 8.535 8.541 8.541 9.770 9.680 9.580 9.545 10.692 10.670 10.504 10.670 10.666 10.666 12.305 12.295 12.196 12.136 12.080 12.046 12.291 12.290

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

1231 1364 1434 1434 1434 1023 1149 1273 1410 1192 1330 1487 1419 1631 1650 1332 1452 1594 1680 1776 1837 1714 1853

1425 1579 1660 1660 1660 1184 1330 1474 1633 1380 1540 1722 1643 1888 1910 1543 1682 1845 1946 2057 2127 1984 2146

1619 1795 1886 1886 1886 1346 1512 1675 1856 1569 1750 1957 1868 2146 2171 1753 1911 2097 2211 2337 2417 2255 2438

x 1000 lb

712 790 830 830 830 592 665 737 816 690 770 861 822 944 955 771 841 923 973 1028 1063 992 1073

1036 1149 1207 1207 1207 861 967 1072 1188 1004 1120 1252 1195 1373 1389 1122 1223 1342 1415 1496 1547 1443 1560

1166 1292 1358 1358 1358 969 1088 1206 1336 1129 1260 1409 1345 1545 1563 1262 1376 1510 1592 1683 1740 1624 1756

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

CASING CONNECTIONS

MACII™ 5 1/2" to 16"

119

. Pressure energized metal seal provides

1

100% collapse rating.

1

. Trouble-free make-up on even the

2

heaviest pipe weights is ensure by use of the rugged, coarse-pitch threads combined with field-proven, deep stabbing two-step design.

2

. 100% pipe body rated gas sealing,

3

internal pressure energized, metal to metal seal.

3

. Triaxial performance achieved by featureS

machining pin and box on formed ends increasing both tension and combined load performance.

120

. Intermediate casing . Production casing and tie-backs . Liners . HP/HT and deep wells APPLICATIONS

MACII™

5 1/2" TO 9 5/8" (9 7/8" TO 16" on reverse side) Pipe Body

Designation Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

in

28.40 29.70 32.60 35.30 36.40 38.00 40.50 36.70 40.20 43.70 47.10 50.40 53.70 65.80 41.00 42.70 44.00 45.40 46.40 49.50 50.10 53.60 57.10 60.50 63.90 45.30 47.10 51.20 52.80 55.30 59.20 63.20 66.90 70.70 46.10 48.60 70.80 74.20 54.00 58.70 63.50 68.10 72.70 77.10 81.50 83.20 58.40 59.40 61.10 64.90 70.30 71.60 75.60 80.80 86.00 91.00

0.530 0.562 0.625 0.687 0.705 0.750 0.812 0.562 0.625 0.687 0.750 0.812 0.875 1.125 0.590 0.625 0.640 0.670 0.687 0.730 0.750 0.812 0.875 0.937 1.000 0.595 0.625 0.687 0.712 0.750 0.812 0.875 0.937 1.000 0.595 0.640 0.937 0.980 0.625 0.687 0.750 0.812 0.875 0.937 1.000 1.025 0.595 0.609 0.625 0.672 0.734 0.750 0.797 0.859 0.922 0.984

4.440 4.376 4.250 4.126 4.090 4.000 3.876 5.501 5.375 5.251 5.125 5.001 4.875 4.375 5.820 5.750 5.720 5.660 5.626 5.540 5.500 5.376 5.250 5.126 5.000 6.435 6.375 6.251 6.201 6.125 6.001 5.875 5.751 5.625 6.560 6.470 6.126 6.103 7.375 7.251 7.125 7.001 6.875 6.751 6.625 6.575 8.435 8.407 8.375 8.281 8.157 8.125 8.031 7.907 7.781 7.657

4.315 4.251 4.125 4.001 3.965 3.875 3.751 5.376 5.250 5.126 5.000 4.876 4.750 4.250 5.695 5.625 5.595 5.535 5.501 5.415 5.375 5.251 5.125 5.001 4.875 6.310* 6.250 6.126 6.076 6.000 5.876 5.750 5.626 5.500 6.435* 6.345* 6.001 6.000 7.250 7.126 7.000 6.876 6.750 6.626 6.500 6.450* 8.279* 8.251 8.219 8.125 8.001 7.969 7.875 7.751 7.625 7.501

5 1/2

TSH / PCC / Version 01 / March 2009

6 5/8

7

7 5/8

7 3/4 8 8 1/16 8 5/8

9 5/8

BOx Outside Diameter

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

in

in

sq in

%

%

4.360 4.296 4.170 4.046 4.010 3.920 3.796 5.421 5.295 5.171 5.045 4.921 4.795 4.295 5.740 5.670 5.640 5.580 5.546 5.460 5.420 5.296 5.170 5.046 4.920 6.400 6.295 6.171 6.121 6.045 5.921 5.795 5.671 5.545 6.530 6.405 6.046 6.045 7.295 7.171 7.045 6.921 6.795 6.671 6.545 6.525 8.400 8.327 8.295 8.201 8.077 8.045 7.951 7.827 7.701 7.577

4.94 4.94 4.94 5.75 5.75 5.81 6.44 5.00 5.75 5.75 5.81 6.44 6.44 7.38 5.00 5.00 5.75 5.75 5.75 5.81 5.81 6.44 6.44 7.38 7.38 5.00 5.00 5.81 5.81 5.81 6.44 6.44 7.38 7.38 5.75 5.75 7.38 7.38 5.81 5.81 5.81 6.50 7.38 7.38 7.38 7.38 5.81 5.81 5.81 5.81 6.50 6.50 6.50 7.38 7.38 7.44

75.0 77.8 78.2 76.5 74.9 75.2 74.0 77.1 76.6 76.9 78.1 76.7 75.5 72.4 77.4 78.3 75.7 77.8 78.3 78.9 77.1 77.5 76.2 75.2 74.6 73.9 78.2 77.8 76.3 79.3 79.0 77.6 76.5 75.6 75.1 76.5 76.0 76.0 75.6 77.3 77.8 79.2 79.4 78.5 77.5 76.7 69.9 75.6 76.1 77.3 78.1 78.5 79.4 79.4 80.2 79.0

37.5 38.9 39.1 38.3 37.5 37.6 37.0 38.5 38.3 38.5 39.0 38.3 37.7 36.2 38.7 39.2 37.8 38.9 39.1 39.5 38.5 38.8 38.1 37.6 37.3 36.9 39.1 38.9 38.1 39.7 39.5 38.8 38.2 37.8 37.6 38.2 38.0 38.0 37.8 38.7 38.9 39.6 39.7 39.3 38.7 38.3 34.9 37.8 38.0 38.7 39.1 39.2 39.7 39.7 40.1 39.5

5.716 5.743 5.770 5.767 5.766 5.764 5.761 6.921 6.887 6.951 6.948 6.945 6.942 6.933 7.259 7.300 7.270 7.298 7.311 7.344 7.343 7.340 7.337 7.334 7.331 7.885 7.921 8.004 8.003 8.001 7.998 7.994 7.991 7.989 8.025 8.084 8.386 8.450 8.884 8.970 9.054 9.051 9.047 9.044 9.041 9.075 9.843 9.873 9.889 9.965 10.047 10.060 10.099 10.102 10.098 10.095

6.205 6.781 7.490 7.951 7.958 8.418 8.851 8.250 9.020 9.860 10.807 11.367 11.931 14.078 9.195 9.807 9.679 10.368 10.664 11.349 11.349 12.235 12.838 13.423 14.063 9.710 10.743 11.650 11.796 12.847 13.723 14.407 15.051 15.736 10.046 10.934 15.804 16.570 11.869 13.249 14.439 15.784 16.905 17.766 18.562 18.767 11.793 13.033 13.440 14.620 16.017 16.410 17.558 18.779 20.213 21.093

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

589 644 712 755 756 800 841 784 857 937 1027 1080 1133 1337 874 932 920 985 1013 1078 1078 1162 1220 1275 1336 922 1021 1107 1121 1220 1304 1369 1430 1495 954 1039 1501 1574 1128 1259 1372 1499 1606 1688 1763 1783 1120 1238 1277 1389 1522 1559 1668 1784 1920 2004

683 746 824 875 875 926 974 908 992 1085 1189 1250 1312 1549 1011 1079 1065 1140 1173 1248 1248 1346 1412 1477 1547 1068 1182 1282 1298 1413 1510 1585 1656 1731 1105 1203 1738 1823 1306 1457 1588 1736 1860 1954 2042 2064 1297 1434 1478 1608 1762 1805 1931 2066 2223 2320

776 848 936 994 995 1052 1106 1031 1128 1233 1351 1421 1491 1760 1149 1226 1210 1296 1333 1419 1419 1529 1605 1678 1758 1214 1343 1456 1475 1606 1715 1801 1881 1967 1256 1367 1976 2071 1484 1656 1805 1973 2113 2221 2320 2346 1474 1629 1680 1828 2002 2051 2195 2347 2527 2637

x 1000 lb

341 373 412 437 438 463 487 454 496 542 594 625 656 774 506 539 532 570 587 624 624 673 706 738 773 534 591 641 649 707 755 792 828 865 553 601 869 911 653 729 794 868 930 977 1021 1032 649 717 739 804 881 903 966 1033 1112 1160

496 542 599 636 637 673 708 660 722 789 865 909 954 1126 736 785 774 829 853 908 908 979 1027 1074 1125 777 859 932 944 1028 1098 1153 1204 1259 804 875 1264 1326 950 1060 1155 1263 1352 1421 1485 1501 943 1043 1075 1170 1281 1313 1405 1502 1617 1687

558 610 674 716 716 758 797 743 812 887 973 1023 1074 1267 828 883 871 933 960 1021 1021 1101 1155 1208 1266 874 967 1049 1062 1156 1235 1297 1355 1416 904 984 1422 1491 1068 1192 1300 1421 1521 1599 1671 1689 1061 1173 1210 1316 1442 1477 1580 1690 1819 1898

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift. . Interchangeable where bracketed. . Torque recommendation values available at www.tenaris.com/tenarishydril. 121

MACII™

9 7/8" TO 16" Pipe Body

Designation Size

Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

in

9 7/8 10 3/4

11 3/4

12 3/4

13 3/8

14

16

62.80 73.20 75.90 79.20 80.80 85.30 91.20 97.10 102.90 104.30 108.70 87.50 94.00 100.50 107.10 111.50 113.50 119.90 94.20 101.70 109.10 116.50 123.70 130.90 137.90 92.50 100.30 108.10 115.70 123.40 130.80 138.30 145.60 99.60 104.20 112.60 109.00 118.00 128.60 137.90 147.30

0.625 0.672 0.700 0.734 0.750 0.797 0.859 0.922 0.984 1.000 1.047 0.734 0.797 0.859 0.922 0.945 0.984 1.047 0.734 0.797 0.859 0.922 0.984 1.047 1.109 0.672 0.734 0.797 0.859 0.922 0.984 1.047 1.109 0.700 0.734 0.797 0.656 0.715 0.781 0.843 0.906

8.625 9.406 9.350 9.282 9.250 9.156 9.032 8.906 8.782 8.750 8.656 10.282 10.156 10.032 9.906 9.860 9.782 9.656 11.282 11.156 11.032 10.906 10.782 10.656 10.532 12.031 11.907 11.781 11.657 11.531 11.407 11.281 11.157 12.600 12.532 12.406 14.688 14.570 14.438 14.314 14.188

8.469* 9.250 9.194 9.126 9.094* 9.000 8.876 8.750 8.626 8.594 8.500 10.126 10.000 9.876 9.750 9.704 9.626 9.500 11.126 11.000 10.876 10.750 10.626 10.500 10.376 11.875 11.751 11.625 11.501 11.375 11.251 11.125 11.001 12.412 12.344 12.218 14.500 14.382 14.250 14.126 14.000

BOx Outside Diameter

Connection Inside Diameter

Make-Up Loss

Critical Section Area

Tensile Efficiency

Compression Efficiency

in

in

in

sq in

%

%

5.81 5.81 5.81 5.81 5.81 7.44 7.44 7.44 7.50 7.44 7.44 6.56 6.56 7.44 7.44 7.44 7.44 7.44 6.56 6.56 6.56 7.50 7.50 7.50 7.44 6.56 6.56 7.44 7.44 7.50 7.50 7.50 7.50 6.56 6.56 6.56 7.56 7.56 7.56 7.56 7.56

13.655 16.264 17.066 18.021 18.366 19.474 21.184 22.257 24.257 23.140 25.602 19.647 21.580 23.313 25.209 25.536 26.713 28.590 21.370 23.510 25.584 27.153 29.182 29.689 33.085 20.267 22.510 24.425 26.622 28.522 30.668 32.662 33.936 22.109 23.397 25.750 20.891 25.312 28.192 30.876 33.579

75.2 76.4 77.2 78.0 77.9 78.1 79.4 78.2 80.3 75.5 80.2 77.3 78.7 79.3 80.4 79.6 80.3 81.2 77.1 78.6 79.7 79.3 80.2 77.1 81.6 75.6 77.2 77.6 78.8 79.1 80.1 80.5 79.4 75.6 76.5 77.9 66.1 73.7 75.5 76.9 78.2

37.6 38.2 38.6 39.0 39.0 39.1 39.7 39.1 40.2 37.8 40.1 38.7 39.3 39.7 40.2 39.8 40.1 40.6 38.6 39.3 39.9 39.6 40.1 38.6 40.8 37.8 38.6 38.8 39.4 39.5 40.0 40.3 39.7 37.8 38.2 38.9 33.0 36.9 37.7 38.5 39.1

10.147 11.041 11.076 11.131 11.157 11.139 11.223 11.283 11.280 11.232 11.276 12.097 12.185 12.267 12.320 12.336 12.332 12.330 13.091 13.185 13.285 13.311 13.387 13.384 13.379 13.680 13.759 13.756 13.848 13.936 13.991 14.033 14.037 14.306 14.354 14.458 16.706 16.706 16.706 16.706 16.706

. Drift diameters displayed are standard. Items marked with * will pass popular oversize drift. . Interchangeable where bracketed. . Torque recommendation values available at www.tenaris.com/tenarishydril.

122

8.565 9.326 9.270 9.202 9.170 9.076 8.952 8.826 8.702 8.670 8.576 10.202 10.076 9.952 9.826 9.780 9.702 9.576 11.202 11.076 10.952 10.826 10.702 10.576 10.452 11.951 11.827 11.701 11.577 11.451 11.327 11.201 11.077 12.520 12.452 12.326 14.608 14.490 14.358 14.234 14.108

Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

1297 1545 1621 1712 1745 1850 2012 2114 2304 2198 2432 1866 2050 2215 2395 2426 2538 2716 2030 2233 2430 2580 2772 2820 3143 1925 2138 2320 2529 2710 2913 3103 3224 2100 2223 2446 1985 2405 2678 2933 3190

1502 1789 1877 1982 2020 2142 2330 2448 2668 2545 2816 2161 2374 2564 2773 2809 2938 3145 2351 2586 2814 2987 3210 3266 3639 2229 2476 2687 2928 3137 3373 3593 3733 2432 2574 2833 2298 2784 3101 3396 3694

1707 2033 2133 2253 2296 2434 2648 2782 3032 2893 3200 2456 2698 2914 3151 3192 3339 3574 2671 2939 3198 3394 3648 3711 4136 2533 2814 3053 3328 3565 3834 4083 4242 2764 2925 3219 2611 3164 3524 3860 4197

x 1000 lb

751 895 939 991 1010 1071 1165 1224 1334 1273 1408 1081 1187 1282 1386 1404 1469 1572 1175 1293 1407 1493 1605 1633 1820 1115 1238 1343 1464 1569 1687 1796 1866 1216 1287 1416 1149 1392 1551 1698 1847

1092 1301 1365 1442 1469 1558 1695 1781 1941 1851 2048 1572 1726 1865 2017 2043 2137 2287 1710 1881 2047 2172 2335 2375 2647 1621 1801 1954 2130 2282 2453 2613 2715 1769 1872 2060 1671 2025 2255 2470 2686

1229 1464 1536 1622 1653 1753 1907 2003 2183 2083 2304 1768 1942 2098 2269 2298 2404 2573 1923 2116 2303 2444 2626 2672 2978 1824 2026 2198 2396 2567 2760 2940 3054 1990 2106 2318 1880 2278 2537 2779 3022

TenarisHydril

PREMIUM CONNECTIONS CATALOGUE

TUBING CONNECTIONS

PH4™ / PH6™ / CS® 3/4" to 7"

123

. 100% metal seal created at the torque

1

shoulder. This metal seal also provides a pressure energized secondary internal pressure seal.

. Excellent galling resistance and trouble-free

2 1

2

. .

make-up provided by non-interference thread style. Reserve torque strength is provided by the 90 degree intermediate shoulder. Close tolerance control between shoulders ensures the intermediate will function as a secondary shoulder.

. 100% pipe body rated gas sealing,

3

internal pressure energized, metal to metal seal.

3 4

. CB ring option

4

. 100% tension strength produced by featureS

. 124

machining pin and box on hot forged upsets. Worldwide reputation for durability in production tubing and workstring applications.

. Production tubing and workstrings . Drilling with tubing . Tubing for internal coating (CB) APPLICATIONS

. Matched strength . CB ring OPTIONS

PH4™ / PH6™ / CS®

Pipe Body

Designation Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

in

0.113 0.154 0.133 0.179 0.140 0.191 0.198 0.145 0.200 0.219 0.156 0.225 0.190 0.218 0.254 0.261 0.295 0.336 0.217 0.276 0.308 0.340 0.392 0.405 0.440 0.254 0.289 0.375 0.430 0.476 0.510 0.530 0.262 0.330 0.415 0.500 0.562 0.610 0.271 0.290 0.337 0.380 0.430 0.500 0.560 0.630 0.362 0.408 0.437 0.478 0.500 0.560

0.824 0.742 1.049 0.957 1.380 1.278 1.264 1.610 1.500 1.462 1.751 1.613 1.995 1.939 1.867 1.853 1.785 1.703 2.441 2.323 2.259 2.195 2.091 2.065 1.995 2.992 2.922 2.750 2.640 2.548 2.480 2.440 3.476 3.340 3.170 3.000 2.876 2.780 3.958 3.920 3.826 3.740 3.640 3.500 3.380 3.240 4.276 4.184 4.126 4.044 4.000 3.880

0.672 0.648 0.955 0.848 1.286 1.184 1.170 1.516 1.406 1.368 1.657 1.519 1.901 1.845 1.773 1.759 1.691 1.609 2.347 2.229 2.165 2.101 1.997 1.971 1.901 2.867 2.797 2.625 2.515 2.423 2.355 2.315 3.351 3.215 3.045 2.875 2.751 2.655 3.833 3.795 3.701 3.615 3.515 3.375 3.255 3.115 4.151 4.059 4.001 3.919 3.875 3.755

1.20 1.50 1 (1.315 OD) 1.80 2.25 1 1/4 (1.660 OD) 2.40 3.02 3.24 1 1/2 (1.900 OD) 2.90 3.64 4.19 2 1/16 3.25 4.50 2 3/8 4.70 5.30 5.95 6.20 6.60 7.70 2 7/8 6.50 7.90 8.70 9.50 10.70 11.00 11.65 3 1/2 9.20 10.30 12.95 14.30 15.80 16.70 17.05 4 11.00 13.40 16.10 19.00 21.10 22.50 4 1/2 12.75 13.50 15.50 17.00 19.20 21.60 24.00 26.50 5 18.00 20.30 21.40 23.20 24.10 27.00

Options

Connection Outside Diameter

Connection Inside Diameter

Make-Up Loss

Tensile Efficiency

Compression Efficiency

in

in

in

in

%

%

CS CS CS CS CS CS CS CS CS CS CS CS CS CS PH6 PH6 PH6 PH6 CS PH6 PH6 PH6 PH6 PH4 PH4 CS CS PH6 PH6 PH6 PH4 PH4 CS PH6 PH6 PH4 PH4 PH4 CS CS PH6 PH6 PH6 PH4 PH4 PH4 CS CS CS CS CS CS

1.327 1.327 1.552 1.600 1.883 1.927 1.927 2.113 2.162 2.179 2.330 2.460 2.700 2.750 2.906 2.938 3.032 3.125 3.210 3.438 3.500 3.625 3.688 3.750 3.750 3.915 3.915 4.313 4.410 4.500 4.500 4.563 4.417 4.625 4.765 5.000 5.090 5.188 4.920 4.955 5.125 5.210 5.313 5.500 5.563 5.688 5.515 5.585 5.630 5.700 5.735 5.835

0.687 0.687 0.970 0.864 1.312 1.218 1.200 1.530 1.440 1.390 1.700 1.550 1.945 1.890 1.805 1.795 1.725 1.645 2.371 2.265 2.200 2.130 2.030 2.000 1.945 2.920 2.870 2.687 2.550 2.485 2.406 2.375 3.395 3.275 3.080 2.920 2.795 2.700 3.865 3.840 3.765 3.650 3.560 3.420 3.300 3.160 4.196 4.104 4.046 3.964 3.920 3.800

2.22 2.22 2.22 2.22 2.22 2.22 2.22 2.22 2.22 2.22 2.23 2.23 2.31 2.31 3.05 3.05 3.05 3.05 2.39 3.04 3.04 3.03 3.02 4.23 4.23 2.84 2.84 3.35 3.35 3.34 4.24 4.24 2.84 3.32 3.31 4.76 4.76 4.76 2.89 2.89 3.34 3.34 3.34 4.76 4.76 4.76 5.27 5.27 5.27 5.27 5.27 5.27

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

80 80 80 80 80 80 80 80 80 80 80 80 80 80 100 100 100 100 80 100 100 100 100 100 100 80 80 100 100 100 100 100 80 100 100 100 100 100 80 80 100 100 100 100 100 100 80 80 80 80 80 80

NAME

Size

3/4 (1.050 OD)

TSH / PCC / Version 01 / March 2009

3/4" TO 5" (5 1/2" TO 7" on reverse side) Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

Matched StRENgth 110 ksi

125 ksi

x 1000 lb

18 24 27 35 37 48 50 44 59 64 51 71 72 81 93 95 106 118 100 124 137 149 168 173 185 142 160 202 228 249 263 272 169 209 257 302 334 357 198 211 242 271 302 346 381 421 290 324 345 373 389 430

27 35 40 51 53 71 73 64 85 93 75 104 104 118 135 139 154 172 145 180 199 217 245 251 269 207 233 295 332 362 383 396 246 304 374 440 486 520 288 307 353 393 440 503 555 613 422 471 501 543 565 625

30 39 44 57 60 79 82 72 96 104 84 117 117 133 152 156 173 194 163 203 224 244 275 283 303 233 262 331 373 407 431 445 277 342 421 495 546 585 324 345 397 443 495 565 624 689 475 530 564 611 636 703

Outside Diameter in

32 41 47 61 64 84 86 76 101 110 89 123 124 140 161 165 183 204 172 214 236 257 290 299 320 246 277 350 394 430 455 470 292 361 444 522 577 617 342 364 419 467 522 597 659 728 501 559 595 645 672 742

37 48 54 70 74 97 100 88 117 127 103 143 143 162 186 191 212 237 199 248 273 298 336 346 370 285 321 405 456 497 527 544 338 419 514 605 668 715 396 422 485 541 605 691 762 843 580 647 689 747 778 859

42 54 62 80 84 110 114 100 134 145 117 162 163 185 212 217 241 269 227 282 310 338 382 393 421 324 364 460 518 565 599 618 385 476 584 687 759 812 450 479 551 615 687 785 866 957 659 736 783 849 884 976

1.300 — 1.525 — 1.858 — — 2.094 — — 2.295 2.407 2.655 2.700 2.782 2.794 2.854 2.924 3.166 3.312 3.365 3.419 3.509 — — 3.859 — 4.189 4.287 4.367 — — 4.359 4.514 4.655 — — — 4.861 4.890 5.021 5.091 5.170 — — — — — — — — —

. Interchangeable where bracketed. . All CS and CS-CB connections of any given size are interchangeable. . All PH6 and PH6-CB connections of any given size are interchangeable. . All PH4 and PH4-CB connections of any given size are interchangeable. . The CB feature is not avalaible in 3/4" and 1". . Torque recommendation values available at www.tenaris.com/tenarishydril. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option. ®

™ ™ ®

®

™ ™

125

PH4™ / PH6™ / CS®

5 1/2" TO 7"

Pipe Body

Designation Nominal Weight

Wall Thickness

Inside Diameter

Drift Diameter

in

lb/ft

in

in

in

17.00 20.00 23.00 26.00 26.80 28.40 28.00 32.00 33.00 34.50 29.00 32.00 35.00 38.00 41.00

0.304 0.361 0.415 0.476 0.500 0.530 0.417 0.475 0.500 0.525 0.408 0.453 0.498 0.540 0.590

4.892 4.778 4.670 4.548 4.500 4.440 5.791 5.675 5.625 5.575 6.184 6.094 6.004 5.920 5.820

4.767 4.653 4.545 4.423 4.375 4.315 5.666 5.550 5.500 5.450 6.059 5.969 5.879 5.795 5.695

5 1/2

6 5/8

7

Connection Outside Diameter

Connection Inside Diameter

Make-Up Loss

Tensile Efficiency

Compression Efficiency

in

in

in

in

%

%

CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS

5.920 6.005 6.090 6.185 6.225 6.275 7.210 7.300 7.340 7.380 7.570 7.640 7.710 7.775 7.855

4.812 4.698 4.590 4.468 4.420 4.360 5.710 5.595 5.545 5.495 6.104 6.014 5.924 5.840 5.740

5.27 5.27 5.27 5.27 5.27 5.27 5.26 5.26 5.26 5.26 5.28 5.28 5.28 5.28 5.28

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

80 80 80 80 80 80 80 80 80 80 80 80 80 80 80

NAME

Size

. Interchangeable where bracketed. . All CS and CS -CB connections of any given size are interchangeable. . All PH6 and PH6-CB connections of any given size are interchangeable. . All PH4 and PH4-CB connections of any given size are interchangeable. . The CB feature is not avalaible in 3/4" and 1". . Torque recommendation values available at www.tenaris.com/tenarishydril. . For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option. ®

126

®









Joint Yield Strength 55 ksi

80 ksi

90 ksi

95 ksi

110 ksi

125 ksi

471 554 630 714 746 786 773 872 914 956 803 885 966 1041 1129

546 641 729 826 864 910 895 1010 1058 1107 929 1025 1119 1206 1307

620 729 829 939 982 1034 1017 1147 1203 1258 1056 1165 1272 1370 1485

x 1000 lb

273 321 365 413 432 455 447 505 529 553 465 512 559 603 653

397 466 530 601 628 662 651 734 770 805 676 745 814 877 950

447 525 597 676 707 745 732 826 866 905 760 839 916 986 1069

www.tenaris.com/tenarishydril

For contact information, please visit our website: www.tenaris.com

TSH / PCC / Version 01 / March 2009 Tenaris and its member companies have produced this catalogue for general information only. Tenaris does not assume any responsibility or liability for any loss, damage, injury resulting from the use of information and data herein. Warranties, indemnities and any other obligations will result only from the respective contracts of license or sale, as the case may be. Please contact a Tenaris representative for more complete information, and for information on other TenarisHydril products not shown here which are also available upon request. TenarisBlue, Tenaris logo and Hydril are trademarks or registered trademarks in the United States of America and other countries. © Tenaris 2009. All rights reserved.

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF