Huawei Certification Training Catalog (Subcontractors) V1.2
January 23, 2017 | Author: lifetime371215 | Category: N/A
Short Description
Download Huawei Certification Training Catalog (Subcontractors) V1.2...
Description
Huawei Certification Training Catalog Partner
Huawei Certification T Training raining Catalog Partner
COMMERCIAL IN CONFIDENCE
1
Huawei Certification Training Catalog Partner
HUAWEI Learning Service 2013
COMMERCIAL IN CONFIDENCE
2
Huawei Certification Training Catalog Partner
HUAWEI Learning Service 2013
COMMERCIAL IN CONFIDENCE
2
Huawei Certification Training Catalog Partner
1
2
IP Technology echnology Certificat Certification ion Training Training ...................................................................................................................... 5 1.1
HCDA-HNTD (Huawei Certified Datacom Associate-HuaWei Associate-HuaWei Networking Technologies and Device) Device)
Training
5
1.2
HCDP-BCRN (Huawei Certified Datacom Professional-Building Professional-Building Carrier Routing Network) Training ........ 6
1.3
HCDP-BCAN (Huawei Certified Datacom Professional-Building Carrier Access Network) Network) Training....... ... 7
1.4
HCDP-BITN (Huawei Certified Datacom Professional-Building IP Telecom Telecom Network) Training...... ...... ..... 8
1.5
HCIE (Huawei Certified Internetwork Expert-Improve Expert-Improve Carrier Network Performance) Performance) Training..... Training..... ...... ...... 9
Cloud Computing Computing Certificat Certification ion Training Training ................................................................................................................ 11 11 2.1
3
4
HCNA-HCTD (Huawei Certified Network Associate- Huawei Cloud Technologies and Device) Training.. 11
LTE Certificatio Certification n Training Training ....................................................................................................................................12 3.1
HCNA-LTE (Huawei Certified Network Associate — LTE) Training Training........................................................12
3.2
HCNP-LTE HCNP-LTE (Huawei Certified Network Professional — LTE) Training Training....................................................13
3.3
HCNP-EPC (Huawei Certified Network Professional — EPC) EPC) Training Training..................................................14
Access Network Network...... ...... ...... ...... ...... ........... ..... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ........... ..... ...... ...... ...... ...... ...... ....15 4.1
Huawei Certified Network Associate-Huawei Associate-Huawei Access Network Technologies Technologies and Device Training Outline 15
5
4.2
Huawei Certified Network Professional-Huawei Access Network Technologies Technologies and Device Training
Outline
15
Optical Optical Network Network ..................................................................................................................................................16 5.1
Huawei Certified Network Associate-Huawei Associate-Huawei Optical Network Technologies Technologies and Device Training Outline 16
5.2
Huawei Certified Network Professional-Huawei Optical Network Technologies Technologies and Device Training Outline 16
6
7
Microwave Microwave Product Product ............................................................................................................. ................................17 6.1
Huawei Certified Network Associate-Huawei Associate-Huawei Microwave Technologies Technologies and Device Training Outline ...... .17
6.2
Huawei Certified Network Professional-Huawei Microwave Technologies Technologies and Device Training O utline ...18
Mobile Soft Switch Switch ..............................................................................................................................................19 7.1
Huawei Certified Network Associate-Huawei Mobile Soft Switch Technologies and Device Training Outline 19
8
9
7.2
Huawei Certified Network Professional-Huawei Mobile Soft Switch Technologies Technologies and Device Training
Outline
20
NGN...................................................................................................................................................................22 8.1
Huawei Certified Network Associate-Huawei NGN Technologie Technologies s and Device Training Outline........ ...... ..22
8.2
Huawei Certified Network Professional-Huawei NGN Technologies Technologies and Device Training Outline ... ...... ..24
MGW&SBC MGW&SBC ........................................................................................................................................................25 9.1
10
11
Huawei Certified Network Associate-Huawei Associate-Huawei MGW&SBC Technologies Technologies and Device Training Outline .....25
USC ...................................................................................................................................................................27 10.1
Huawei Certified Network Associate-Huawei USC Technologies Technologies and Device Training Outline ...... ...... ....27
10.2
Huawei Certified Network Professional-Huawei USC Technologies Technologies and Device Training Outline ...... ...... 28
SG .....................................................................................................................................................................29 11.1
Huawei Certified Network Associate-Huawei SG Technologies Technologies and Device Training Outline ......... ...... ...29
COMMERCIAL IN CONFIDENCE
3
Huawei Certification Training Catalog Partner
11.2 12
13
14
15
GSM ..................................................................................................................................................................31 12.1
Huawei Certified Network Associate-Huawei GSM Technologies Technologies and Device Training Outline ..... ...... ....31
12.2
Huawei Certified Network Professional-Huawei GSM Technologies Technologies and Device Training Outline ....... ....32
WCDMA.............................................................................................................................................................33 13.1
Huawei Certified Network Associate-Huawei Associate-Huawei WCDMA Technologies Technologies and Device Training Outline ...... ....33
13.2
Huawei Certified Network Professional-Huawei WCDMA Technologies Technologies and Device Training Outline ......34
CDMA CDMA ........................................................... .....................................................................................................35 14.1
Huawei Certified Network Associate-Huawei Associate-Huawei CDMA Technologies Technologies and Device Training Outline .. ...... .....35
14.2
Huawei Certified Network Professional-Huawei CDMA Technologies Technologies and Device Training Outline ...... ...37
Wimax................................................................................................................................................................39 15.1
16
17
18
19
20
21
22
23
Huawei Certified Network Professional-Huawei SG Technologies Technologies and Device Training Outline ...... ...... ..30
Huawei Certified Network Professional-Huawei Wimax Technologies Technologies and Device Training Outline.... .....39
GSM RNP&RNO RNP&RNO ................................................................................................................................................40 16.1
Huawei Certified Network Associate- Huawei GSM RNP&RNO Technology Technology Training Training Outline ........ ...... ...40
16.2
Huawei Certified Network Professional - Huawei GSM RNP&RNO Technology Technology Training Outline ...... ...... 41
WCDMA RNP&RNO RNP&RNO ...........................................................................................................................................42 17.1
Huawei Certified Network Associate-WCDMA RNP&RNO Training Outline ...........................................42
17.2
Huawei Certified Network Professional-WCDMA RNP&RNO Training Outline .......................................42
CDMA CDMA RNP&RNO RNP&RNO .............................................................................................................. ................................43 18.1
Huawei Certified Network Associate-Huawei Associate-Huawei CDMA RNP&RNO Technologies Technologies Training Outline ....... ...... 43
18.2
Huawei Certified Network Professional-Huawei CDMA RNP&RNO RNP&RNO Technologies Technologies Training Outline ......... 44
Microwave Microwave RNP ..................................................................................................................................................46 19.1
Huawei Certified Network Associate-Huawei Associate-Huawei Microwave RNP Technologies Technologies Training Outline ...... ...... .....46
19.2
Huawei Certified Network Professional-Huawei Microwave RNP Technologies Technologies Training O utline...... ...... .47
Site and Power Power System System.......................................................................................................................................48 20.1
Huawei Certified Network Associate- -Huawei Site and Power System Technology and Device Training
Outline
48
Hybrid Hybrid Power Power Supply Supply ..........................................................................................................................................49 21.1
Huawei Certified Network Associate- Huawei Hybrid Power Supply Technology and Device Training
Outline
49
Hardware Hardware Installation Installation Supervision Supervision (excluding (excluding RF products) products) ..................................................................................49 22.1
Huawei Certified Network Associate-Hardware Associate-Hardware Installation Supervision (excluding RF products) Training
Outline
49
Hardware Hardware Installation Installation Supervision Supervision (including (including RF products) products) ...................................................................................50 23.1
Huawei Certified Network Associate-Hardware Associate-Hardware Installation Supervision (including RF products) Training
Outline
50
COMMERCIAL IN CONFIDENCE
4
1
IP Technology Certification Training
1.1 HCDA-HNTD (Huawei Certified Datacom Associate-HuaWei Networking Technologies and Device) Training Training Path
Describe TCP/IP model, the function of each layer, the function and the working principle of
HCDA-HNTD (Huawei Certified Datacom Associate-Huawei Networking Networking Technologies Technologies and Device) exercise ODC01 Lecture, Hands-on exercise
8d
some common protocols
Describe ICMP working principle
Describe Router and Switch working principle
Describe the basic basic principle principle and configuration configuration of VLAN, STP, VRRP, VRRP, Static Stat ic Route, Ro ute, RIP, OSPF, OSPF,
Target Audience This program is intended for those who are to be
PPP, Frame Relay
subnetting technology
certified by HCDA exam
Prerequisites
Design IP addresses with IP address
Apply ping, tracert in network maintenance and basic troubleshooting
Be familiar with Windows operating operating system system
Know the basic function and conception of computer network
Objectives On completion of this program, the participants will be able to:
Describe the hierarchical hierarchical structure structure of IP network and the function of each layer
Describe Ethernet evolution evolution and relative technology
Configure Confi gure IP address, VLAN, VRRP, VRRP, Static Route,RIP,OSPF in VRP platform
Locate and handle the simple simple fault
Choose Huawei Huawei routers for each each layer of of IP network
Duration 8 working days
Class Size Min 6,max 12
Outline network security and firewall firewall concepts concepts
COMMERCIAL IN CONFIDENCE
5
1.2 HCDP-BCRN (Huawei Certified Datacom Professional-Building Carrier Routing Network) Training Training Path
MP-BGP for IPv6
HCDP-BCRN (Huawei Certified Datacom
platform and use BGP route attributes and
Professional-Building Carrier Routing Network) ODC02 Lecture, Hands-on exercise
Configure BGP/MP-BGP for IPv6 in VRP route policy to select and filter routing in large
9d
Target Audience This program is intended for those who are to be
network based on demand
BGP route reflector and confederation
Describe the BGP multi-homed basic concepts and application scenarios
certified by the HCDP-BCRN exam
Prerequisites
Describe the working principle and function of
Troubleshoot the BGP peer establishtion failures,routing learning failures and path
Have got the HCDA certification or have equivalent technical level
selection failures
Objectives
tools(Access control list,ip-prefix,as-path-filter,community-filter,route
On completion of this program, the participants will
-policy)
be able to:
Flexibly apply the VLSM technique to design IP
Flexibly apply the CIDR technique to aggregate
Describe the IPv6 basic packets and the IPv6
Describe the basic protocol of IPv6 (ICMPv6,
Describe the working principle of OSPFv2/v3
Describe several OSPF special areas
Troubleshoot OSPF neighbor relationship failures and routing failures
Describe the working principle of ISIS routing protocol in IPv4 and IPv6
Troubleshoot ISIS common neighbor relations failure and routing failures
and service requirement to build the large network and deploy the service
Locate and remove routing problems in large scale IP network
Duration 9 working days
Class Size
Configure OSPF and ISIS in VRP platform to realize the IP connectivity of the large network
Select the appropriate Huawei middle and high end routers based on t he device performance
routing protocol
Describe NE80E/NE40E and NE40E-X series hardware features
ND, IPv6 address allocation protocol)
Describe NE5000E/NE5000E-X16 series hardware features
address structure
Configure IGMP/PIM-SM/PIM-DM in VRP platform
the routes
Describe the working principle of multicast protocol(IGMP,PIM-SM,PIM-DM)
addresses
Flexibly apply the common route selection
Min 6,max 12
Describe the working principle of BGP and
COMMERCIAL IN CONFIDENCE
6
1.3 HCDP-BCAN (Huawei Certified Datacom Professional-Building Carrier Access Network) Training Training Path
Configure VLAN, GVRP, QinQ, STP, RSTP, MSTP in VRP platform
HCDP-BCAN (Huawei Certified Datacom
Professional-Building Carrier Access Network) ODC03 Lecture, Hands-on exercise
implement user isolation and service
6d
Target Audience This program is intended for those who are to be
transportation
Apply STP, RSTP, MSTP in access network to avoid loop
Deploy PPPoE, IPoE, IPoEoVLAN in access network
certified by HCDP-BCAN exam
Prerequisites
Apply VLAN, GVRP, QinQ to access network to
Perform the troubleshooting about VLAN, GVRP, QinQ, STP, RSTP, MSTP, PPPoE, IPoE,
Have got the HCDA certification or have equivalent technical level
Objectives On completion of this program, the participants will be able to:
Describe the working principle of VLAN, GVRP,
IPoEoVLAN in access network
Choose appropriate Huawei switches and BRAS devices in access network deployment
Duration 6 working days
Class Size
QinQ, STP, RSTP, MSTP
Describe the working principle of PPP, PPPoE,
Min 6,max 12
IPoE, IPoEoVLAN
COMMERCIAL IN CONFIDENCE
7
1.4 HCDP-BITN (Huawei Certified Datacom Professional-Building IP Telecom Network) Training Training Path
principles of the MPLS BGP VPN
HCDP-BITN (Huawei Certified Datacom
to realize the connectivity of the different sites
Professional-Building I P Telecom Network) ODC04 Lecture, Hands-on exercise
Configure the MPLS BGP VPN in VRP platform
7d
Target Audience
Configure the MPLS BGP VPN in the single domain of the large I P bearer network to realize private network users to access Internet
Master the troubleshooting methods of the
This program is intended for those who are to be
MPLS BGP VPN in control plane and dat a
certified by the HCDP-BITN exam
plane
Prerequisites
Describe the working principle and the four components of MPLS TE
Have got the HCDA certification or have equivalent technical level
Configure MPLS TE in VRP platform
Describe the basic concepts of QoS and the
Objectives On completion of this program, the participants will
different QoS models
classification and marking,traffic policy and
be able to:
shaping,congestion management and
Describe the features and performance of IP
avoidance,link efficiency m echanisms,etc
bearer network
Describe the basic principle of MPLS
Describe the basic process of MPLS data forwarding
Describe the basic concepts and principles of the MPLS LDP
Description the MPLS LDP label management
Describe the IP QoS technologies, such as
Describe the basic principle of the common HA technologies, such as NSR, BFD, protection switching technologies and VRRP
Duration 7 working days
Class Size
mechanism and the loop protection mechanism
Configure MPLS LDP in VRP platform
Describe the basic concepts and basic
COMMERCIAL IN CONFIDENCE
Min 6,max 12
8
1.5 HCIE (Huawei Certified Internetwork Expert-Improve Carrier Network Performance) Training Training Path
Target Audience
Advanced Routing Features Principle and
This program is intended for those who are to be
Configuration
certified by the HCIE exam
ODC05
Lecture, Hands-on exercise
2d
Prerequisites
Advanced MPLS VPN Features Principle
equivalent technical knowledge level
and Configuration ODC06
Have got the HCDP certification or have the
Lecture, Hands-on exercise
7d
Objectives On completion of this program, the participants will be able to:
Multicast Features Principle and Configuration ODC07
Lecture, Hands-on exercise
features
1d
Lecture, Hands-on exercise
Configure NE5000E/80E/40E advanced routing features
QoS Features Principle and Configuration ODC08
Describe NE5000E/80E/40E advanced routing
Troubleshoot NE5000E/80E/40E advanced routing features
1d
Describe MAN typical network structure and routing design features
HA Features and Configuration ODC09
Lecture, Hands-on exercise
2d
Deploy routing protocol in MAN
Optimize routing protocol deployment in MAN
Troubleshoot the typical Failure of routing protocol in MAN
BRAS Access Service Features and
Realization ODC10
Lecture, Hands-on exercise
Describe NE5000E/80E/40E advanced MPLS L3VPN and L2VPN features
2d
Configure NE5000E/80E/40E advanced MPLS L3VPN and L2VPN features
IP MAN Design and Service Deployment
Troubleshoot NE5000E/80E/40E advanced MPLS L3VPN and L2VPN features
ODC11
Lecture, Hands-on exercise
4d
Describe IGMP principle and configuration
Describe PIM-SM principle and configuration
IP Bearer Network Design and Service
Describe PIM-SSM principle and configuration
Deployment
Analyse MSDP basic working principle
Describe MSDP RPF detection
Describe MSDP application
Describe Multicast VPN function and technical
ODC12
Lecture, Hands-on exercise
4d
HCIE Simulation Lab Examination
solution ODC13
exercise
2d
Describe MD VPN concepts and working principle
COMMERCIAL IN CONFIDENCE
9
Configure and troubleshoot MD VPN
Describe the QoS technology
Configure and adjust BGP in MAN
Configure QoS in the NE series routers
Describe the devices and interfaces of core
Analyse and troubleshoot the common faults of QoS configuration in the NE series routes
network
Describe the HQoS realization and application
Describe HA basic concepts and HA
Describe BFD principles and typical
Describe NSR principle
Describe the various protection switching technology and in NE5000E80E40E product
IP bearer network
Configure fast convergence of routing protocols
Describe ME60&ME60-X series products
Configure MPLS TE FRR and VPN FRR technologies of IP bearer network backbone
Describe ME60&ME60-X series products
Describe the function of BRAS related
Analyse the ME60 PPP service working
Configure GR technologies of IP bearer network
Describe different QoS requirement of different services in IP bearer network
Describe end to end QoS realization in IP bearer network
process
Analyse the ME60 IP service working process
Configure end to end QoS in IP bearer network
Analyse the ME60 Leased line service working
Help candidates to be familiar with examination
process
Configure fast detection technologies of IP bearer network
Describe end-to-end HA features realization in
components
Configure IGP/BGP and VPN of IP bearer core network
Features
Describe the GR technologies of IP bearer network
hardware
Describe the MPLS TE FRR and VPN FRR technologies of IP bearer network backbone
applications
Describe the fast convergence of routing protocols
classification
Configure HA features of IP bearer core network
Describe the HQoS scheduling process in NE5000E80E40E
Describe the solutions of IP bearer network access part
Describe the HQoS working principle in NE5000E80E40E
MAN
Describe the ME60 Multicast Feature and Realization
Describe IGP deployment in MAN
Describe IGP fast convergence deployment in MAN
Configure and adjust OSPF/ISIS in MAN
Describe BGP deployment in MAN
Describe BGP RR deployment in MAN
Describe route control and route selection in IP
COMMERCIAL IN CONFIDENCE
mode,examination rules, and examination environment
Duration 25 working days
Class Size Min 2,max 6
10
2
Cloud Computing Certification Training
2.1 HCNA-HCTD (Huawei Certified Network Associate- Huawei Cloud Technologies and Device) Training Training Path
IT Foundation for Cloud Computing Training (Optional) DC03
Lecture, Hands-on
Fundamentals of Cloud Computing Training Lecture
DC02
Desktop Cloud Administration Training DC05
Lecture, Hands-on
Target Audience This training program is intended for t hose who are to take the HCNA certification exam.
Prerequisites
Be familiar IT foundation knowledge.
Objectives After the completion of this program, participants will be able to:
Describe Active Directory Service.
Describe Dynamic Host Configuration Protocol.
Describe Domain Name Service.
Describe the Linux File System Structure.
Performing Linux Directory Operations.
Performing Linux File Operations.
Administering User Account.
Performing System Resources Management.
Performing Basic Network Configuration.
Describe the hierarchical structure of an IP network and the functions of each layer.
COMMERCIAL IN CONFIDENCE
Describe Cloud Computing Use Cases.
Describe Cloud Computing Key Characteristics.
Describe the Basic Concepts of Server Virtualization.
Describe the Basic Concepts of Network Virtualization.
Describe the Basic Concepts of Storage Virtualization.
Describe the Basic Concepts of Cloud Storage.
Identify the Storage Access Protocols.
Describe the RAID Features.
Describe Backup and High Availability for Storage.
Describe the Position of Galax in SingleCLOUD.
Describe the Components of Galax.
Describe the Features of Galax.
Describe the Server Architecture.
Describe the Server PCBs.
Describe the Server Switch PCB.
Describe the Server Management PCB.
Describe the Features of Server.
Describe the Features of Storage Product.
Describe the Storage Architecture.
Describe the Storage Specification.
Describe the Features of Switch Product.
Describe the Switch Architecture.
Describe the Switch Specification.
Describe Galax8800 Operating System.
Performing System Login.
Performing System Management.
Performing Server Management.
Performing System Configuration.
Performing Virtualization Operations.
Viewing System Message.
Viewing System Alert.
Viewing System Log.
Understand the Management Port Features.
Performi ng Common Management Tasks.
Understand OceanStor Management Port Features.
Understand OceanStor Management Features.
11
Performi ng Common OceanStor Management Tasks.
Perform VDesktop6000 system backup.
Understand Switch Management Port Features.
Perform VDesktop6000 performance management.
Understand Switch Management Features.
Describe TCs Terminal Types.
Performi ng Common Switch Management Tasks.
Describe TCs Characteristics.
Describe VDesktop6000 networking.
Understand TC Configuration and Management.
Describe VDesktop6000 structure and functions.
Describe VDesktop6000 service flow.
Perform VDesktop6000 count management.
Perform VDesktop6000 asset management.
Perform VDesktop6000 DDC management.
3
Duration 9 workdays ( 2 days, optional + 7 days)
Maximum Class Size 12 persons
LTE Certification Training
3.1 HCNA-LTE (Huawei Certified Network Associate — LTE) Training Training Mode HCNA-LTE (Huawei Certified Network Associate-LTE) Training Lecture, Hands-on
6d
Target Audience This training program is intended for t hose who are
Huawei eNodeB product family and applications
Basic operation about Huawei eNodeB
Basic concepts of the EPC
LTE/EPC network architecture
Interfaces and protocols used in the EPC
EPC security mechanism
EPC QoS mechanism
Procedures of bearer establishment, update, and
to take the HCNA-LTE certification exam and those who hope to l earn about basic LTE/SAE principles
release
and Huawei LTE equipment.
Prerequisites
Be familiar with basic wireless communication principles
Objectives After the completion of this program, participants will be able to understand:
Basic pinciple of LTE air interfaces
COMMERCIAL IN CONFIDENCE
Concepts and procedures related to EPC mobility management
Concepts and procedures related to EPC session management
Duration 6 workdays
Maximum Class Size 16 persons
12
3.2 HCNP-LTE (Huawei Certified Network Professional — LTE) Training Training Mode
Understand functions of different layers in LTE air interface
HCNP-LTE (Huawei Certified Network Professional-LTE) Training Lecture, Hands-on
Understand functions and procedures of X1/S2 interface
Understand typical procedures in LTE such as handovers
10d
Target Audience
managing eNodeB alarms, tracing signaling, manage eNodeB software, managing real-time monitoring and
This training program is intended for t hose who are
etc.
to take the HCNP-LTE certification exam and those who hope to l earn about detailed LTE principles
Perform initial configuration and reconfiguration of HUAWEI LTE eNodeB
and Huawei LTE equipment.
Prerequisites
Perform Operations for HUAWEI LTE eNodeB such as
Perform eNodeB troubleshooting
Duration
Be familiar with basic LTE principles
Objectives
10 workdays
Maximum Class Size After the completion of this program, participants will be able to:
Understand structure of LTE /EPC
Understand detailed principle of LTE air interface
COMMERCIAL IN CONFIDENCE
16 persons
13
3.3 HCNP-EPC (Huawei Certified Network Professional — EPC) Training S-GW, DNS, NTP
Training Mode
HCNP-EPC (Huawei Certified Network Professional-EPC) Training Lecture, Hands-on
session management
12d
Target Audience
Perform configuration of mobility management and
Describe system structure and hardware structure of UGW9811
Perform software related installation and upgrade procedure
This training program is intended for t hose who are to take the HCNP-EPC certification exam and
Perform hardware operation and maintenance.
Perform the routing operation and maintenance
those who hope to learn about detailed EPC
including authorization management, system
principles and Huawei EPC equipments.
information management, alarm management, trace
Prerequisites
management ,patch management ,data b ackup and
Be familiar with basic EPC principles
Objectives
management ,log management, license restore
Perform data configuration of S1-U&S11,S5S8 and SGi
After the completion of this program, participants
interfaces .Describe basic concept of VPN,APN and
will be able to:
charging
Describe system structure and hardware structure of
Perform configuration of VPN ,APN and charging
USN9810
Describe the DPI principles ,content based charging principles and PCC concepts
Perform software related installation and upgrade procedure
Perform configuration of the DPI function, service control function and PCC
Perform hardware operation and maintenance
Perform the routing operation and maintenance
Describe HSS9820 product function and application
including security management, system information
Perform HSS9820 configuration of subscription data.
management, alarm management, trace management ,
Describe the steps of HSS9820 data configuration.
data management, license management ,performance
Perform HSS9820 hardware and system data
management
Describe the functions of protocol stacks of different interfaces
configuration.
Perform HSS9820 interface data configuration.
Duration
Perform configuration of USN hardware, System Information, interworking with eNodeB, HSS, MME,
COMMERCIAL IN CONFIDENCE
12 workdays
14
Maximum Class Size
4
16 persons
Access Network
4.1 Huawei Certified Network Associate-Huawei Access Network Technologies and Device Training Outline Training Mode
will be able to:
Huawei Access Network
Technologies and
Device Training Lecture, Hands-on
11 d
Understand xDSL/ATM/GPON/EPON/DataCom theory.
Be familiar with hardware construction, features, board types, functions and i nterfaces
Know how to install/commission/configure access equipment hardware.
Target Audience This training program is intended f or those who hope to learn about basic access network theory.
Prerequisites
Perform upgrade task under CLI of equipment.
Be familiar with HSI、IPTV、VOIP acceptance test.
Understand basic theory of NMS and SNMP, can use NMS add and monitor equipment.
Be familiar with windows operation system.
Know well about computer network
Understand basic data communication theory
Understand basic fiber communication theory
Duration 11 workdays Maximum Class Size 16 persons
Objectives After the completion of this program, participants
4.2 Huawei Certified Network Professional-Huawei Access Network Technologies and Device Training Outline Training Mode
Target Audience This training program is intended f or those who
H Huawei Access Network Technologies and Device Training Lecture, Hands-on
expect to learn mor e about the Access network commissioning, maintenance and troubleshooting
13d
Prerequisites
Function well on maintenance and commissioning of Huawei equipments
COMMERCIAL IN CONFIDENCE
15
Be familiar with access network communication theory
migration and the usage of the migration tools
Objectives
After the completion of this program, participants
database commands for troubleshooting of access
Be familiar with HSI、IPTV、VOIP test item and test
products.
function.
Be familiar with NMS installation, basic NMS service configuration, NMS operating system and basic
will be able to:
Be familiar with the typical solutions for Access Network
Duration
Be familiar with problem locating on 13 workdays
xDSL/ATM/GPON/EPON
Maximum Class Size
Be familiar with problem maintenance of access network products.
16 persons
Perform data plan and network design for FTTx.
5
Optical Network
5.1 Huawei Certified Network Associate-Huawei Optical Network Technologies and Device Training Outline Training Mode
Understand SDH/WDM/data communication theory.
Be familiar with hardware construction, features, board
Huawei Optical Network Technologies and Device Training Lecture, Hands-on
15 d
Target Audience
types, functions and in terfaces
Know how to install/commission/configure optical equipment hardware.
Understand DC tool, board-level loading and simulation package loading of software.
This training program is intended f or those who want to take the HCNA certification exam and those who hope to learn about basic optical network principles .
Prerequisites
Be familiar with windows operation system.
Know well about computer network
Understand basic data communication theory
Understand basic fiber communication theory
Be familiar with MSTP/HMSTP/WDM acceptance test.
Understand basic theory of NMS and SNMP, can use NMS add and monitor equipment.
Duration 15 workdays
Maximum Class Size 16 persons
Objectives After the completion of this program, participants will be able to:
5.2 Huawei Certified Network Professional-Huawei Optical Network Technologies and Device Training Outline
COMMERCIAL IN CONFIDENCE
16
Training Mode
will be able to:
Huawei Optical Network Technologies and Device Training Lecture, Hands-on
10 d
Be familiar with MSTP/WDM test item and test function.
Be familiar with OAM/QoS feature and function of MSTP
Be familiar with problem locating on SDH/WDM
Be familiar with problem maintenance of optical network
Target Audience
products.
This training program is intended f or those who
planning of optical product.
want to take the HCNP certification exam and personnel who expect to learn SDH and WDM
Be familiar with NMS installation, basic NMS service configuration, NMS operating system and basic
network commissioning, maintenance and network
database commands for troubleshooting of optical
reconstruction
products.
Prerequisites
Be familiar with data collection and basic service
Duration
Function well on maintenance and commissioning of
10 workdays
huawei equipments
Maximum Class Size
Be familiar with optical network communication theory
Objectives
16 persons
After the completion of this program, participants
6
Microwave Product
6.1 Huawei Certified Network Associate-Huawei Microwave Technologies and Device Training Outline Training Mode
will be able to:
Describe the concept and characters of digital microwave communication.
Huawei Microwave Technologies and Device Training Lecture, Hands-on
9d
Describe the theory and function of every parts in the digital microwave system.
Target Audience
List the networking application for digital microwave systems.
Describe the Ethernet basic knowledge.
to take the HCNA-HMTD certification exam and
Describe the main characteristics of OptiX RTN 600.
those who hope to l earn about Huawei microwave
Describe the system structure, function and application
This training program is intended for t hose who are
of every unit in RTN 600.
equipment operation and maintenance.
Prerequisites
List out the 1+1 protection technology in OptiX RTN 600 hybrid microwave network.
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Describe the main characteristics of OptiX RTN 900.
Describe the system structure, functions and application
Objectives After the completion of this program, participants
COMMERCIAL IN CONFIDENCE
of every unit in RTN 900.
Describe the networking application under PDH/SDH
17
and hybrid microwave modes.
List the routine maintenance items of OptiX RTN 900.
List out the protection technologies in OptiX RTN 900
Implement the maintenance operation of OptiX RTN
network.
900.
Describe the features and applications of the protection
Judge the common faulty in OptiX RTN 900.
technologies.
Implement the software upgrade operation of OptiX
List out the installation procedure for RTN equipment.
Finish proper preparations before the commissioning.
Perform site commissioning of the OptiX RTN 900.
Perform system commissioning of the OptiX RTN 900.
Configure radio links of the OptiX RTN 900.
Configure TDM services of the OptiX RTN 900.
Configure Ethernet services of the OptiX RTN 900.
Configure SNCP/MSP/ERPS/ LAG for OptiX RTN 900.
Outline the general safety precautions of OptiX RTN
RTN 900.
Implement the data collection operation of OptiX RTN 900.
Monitor the RTN equipment via the NMS.
Duration 9 workdays
Maximum Class Size 16 persons
900.
6.2 Huawei Certified Network Professional-Huawei Microwave Technologies and Device Training Outline Training Mode
Outline the typical PWE3 encapsulation format for TDM, Ethernet and ATM services.
Huawei Microwave Technologies and Device Training Lecture, Hands-on
Outline the PWE3 application scenarios of OptiX RTN 900.
7d
Target Audience
Outline the steps of RTN 900 service configuration in packet plane.
Implement Ethernet service/CES service/ATM/IMA services configuration in packet plane via NMS.
This training program is intended for t hose who are to take the HCNP-HMTD certification exam and those who hope to l earn Huawei microwave equipment.
Prerequisites
Implement QoS/OAM/Clock configuration via NMS.
Implement the Ethernet service test via smartbits.
Install the U2000 Single-Server System Software.
Describe the system structure of U2000.
Describe the general troubleshooting flow of OptiX RTN 900.
Take the HCNA-HMTD certification
Objectives
Outline the methods of faults analyzing and locating.
Perform the common troubleshooting for OptiX RTN
After the completion of this program, participants will be able to:
Describe the classification of IP addresses.
Describe the basic principle of IP routing.
Describe the basic concepts of MPLS.
Describe the MPLS tunnel (LSP) creation procedure.
Outline the MPLS OAM functions.
Describe the basic concepts of PWE3.
COMMERCIAL IN CONFIDENCE
900.
Identifying Radio Link Faults.
Duration 7 workdays
Maximum Class Size 16 persons
18
7
Mobile Soft Switch
7.1 Huawei Certified Network Associate-Huawei Mobile Soft Switch Technologies and Device Training Outline Training Mode Target Audience
GSM/UMTS Softswitch Fundamental O
Lecture
MSOFTX3000 Field Maintenance Technicians,
1d
First Line Maintenance Technicians or Routine Maintenance Technicians/Engineers
GSM/UMTS O
CS Commnication Flow Lecture
Prerequisites 2d
None
Objectives MSOFTX3000 Hardware System OWG10
Lecture
After the completion of this program, participants
1d
MSOFTX3000 Basic Data Configuration O
Lecture, Hands-on
4d
will be able to:
Outline the development of GSM and UMTS.
Describe the architecture of GSM and UMTS system.
Describe the Networking and Interfaces of GSM NSS and UMTS R4.
MSOFTX3000 Routine Operation and Maintenance O
Lecture, Hands-on
technology.
5d
Describe basic call control flows in UMTS R4 network.
Describe various types of bearer establishment in UMTS R4 network.
MSOFTX3000 Delta Training(ATCA) O
Lecture
Describe the fundamental of mobile softswitch
2d
Describe basic calling flow in UMTS R4 network.
Describe the hierarchical structure of an IP network and the functions of each layer.
UMG8900 Routine Operation and Maintenance O
Lecture, Hands-on
Describe the MSOFTX3000 system structure, functions, and key characteristics(CPCI).
2d
Describe the function, indicators, ports and working mode of each board(CPCI).
UMG8900 Hardware System OWH10
UMG8900 O
Lecture
Lecture, Hands-on
cables(CPCI).
1d
Software&Patch Loading
Describe the toggle switch in MSOFTX3000(CPCI).
Perform operation through LMT(CPCI).
Describe MSOFTX3000 data configuration method and procedure(CPCI).
1d
Lecture, Hands-on
COMMERCIAL IN CONFIDENCE
Edit the data configuration scripts of MSOFTX3000(CPCI).
UMG8900 Data Configuration O
Explain the types and applications of different fibers and
Perform hardware data configuration(CPCI).
2d
19
Perofrm local office data configuration.
Perform the data configuration to MGW, RNC, HLR and
Describe the toggle switch in UMG8900.
PSTN.
Perform operation through LMT.
Understand the usage of common commands.
Perform UMG8900 Software&Patch Loading
Perform system data backup and restoration.
Describe the UMG8900 data configuration method and
Perform daily alarm and statistic management task.
Understand the operation flow of parts replacement and
Edit the data configuration scripts for UMG8900.
implementing technical protection measures.
Execute the data configuration script.
Perform MSOFTX3000 parts replacement and check
Perform the dynamic data configuration and
cables.
procedure.
the components running status.
Manage tracing tasks.
Perform the routine operation and maintenance tasks (daily, weekly and monthly).
Perform system data backup and restoration, execute MML commands, etc.
Understand the operation flow of parts replacement and implementing technical protection measures.
Perform UMG8900 parts replacement and check the components running status.
and key characteristics(ATCA).
Manage tracing tasks.
Describe the function, indicators, ports and working
Monitor alarms of UMG8900.
mode of each board(ATCA).
Perform the routine operation and maintenance tasks
Explain the types and applications of different fibers and
Describe the toggle switch in MSOFTX3000(ATCA).
Perform operation through LMT(ATCA).
Describe MSOFTX3000 data configuration method and procedure(ATCA).
(daily, weekly and monthly).
Understand troubleshooting procedure and common troubleshooting methods.
Perform common hardware, interfaces, service troubleshooting.
Perform UMG8900 software&Patch reloading and path
Edit the data configuration scripts of
upgrading
MSOFTX3000(ATCA).
Duration
Perform hardware data configuration(ATCA).
Describe the UMG8900 system functions, structures and key characteristics.
Describe the MSOFTX3000 system structure, functions,
cables(ATCA).
Perform UMG8900 system data, interfaces data and resource data configuration.
Perform common hardware, interfaces, service troubleshooting.
Understand troubleshooting procedure and common troubleshooting methods.
modification.
21 work days
Maximum Class Size
Describe the function, indicators, ports and working
16 persons
mode of each board.
Explain the types and applications of different fibers and
7.2 Huawei Certified Network Professional-Huawei Mobile Soft Switch Technologies and Device Training Outline
COMMERCIAL IN CONFIDENCE
20
Training Mode
Perform the dynamic data configuration and modification.
MSOFTX3000 Emer enc Maintenance
Understand deeply number analysis concepts and working principle in MSOFTX3000.
OWG36
Lecture, Hands-on
1d
Perform number analysis configuration and testing task, including call barring analysis, failure processing data,
MSOFTX3000 Troubleshooting OWG38
Lecture, Hands-on
equal access data, etc.
2d
flow in MSOFTX3000.
MSOFTX3000 Advanced Data
Understand deeply IN service concepts and processing
Perform IN service configuration and testing task, including DP data, SCP data, IN service data, I N
OWG30
Lecture, Hands-on
2d
announcement data, etc.
MSS Signaling Analysis
flow in MSOFTX3000.
OWA04
Lecture, Hand-on ractice
Understand deeply IN service concepts and processing
5d
Perform IN service configuration and testing task, including DP data, SCP data, IN service data, IN announcement data, etc.
MSC POOL Training OWG62
Lecture, Case-study
Understand deeply Dual-homing concepts, networking modes and switchover modes in MSOFTX3000.
5d
Use the emergency maintenance tools and platform, and understand d evice and service emergency maintenance procedure.
UMG8900 Emergency Maintenance& Troubleshooting OWH34
Lecture, Hands-on
1d
UMG8900 Fault Location&Networking OWH36
Lecture, Hands-on
Perform complex hardware, interfaces, service troubleshooting.
Describe BSSAP protocol stack and function.
Analysis main procedures of BSSAP (Paging, Initial MS Message, Cipher Mode Control, Assignment, Handover,
5d
Release, DTAP Message).
Target Audience
Describe Iu interface protocol stack and function.
Core network commissioning engineers, operation
Describe classification of RANAP messages.
and maintenance engineers, optimization
Analysis Iu connection Management, RAB assignment, SRNS Relocation
engineers
Prerequisites
At least two years experience of operation and
CS Domain MM, CC procedures in Iu Interfaces.
Perform protocol stack and main functions of SIGTRAN.
Analysis SCTP association establishment and close
maintenance of GSM NSS/UMTS CS or other telecommunication equipments
flows.
A basic knowledge of mobile communication and soft switch principle
Routing key).
Objectives After the completion of this program, participants will be able to:
Edit the data configuration scripts of MSOFTX3000.
COMMERCIAL IN CONFIDENCE
Describe UA concepts introducti on (AS, SG, IPSP, Entity,
Perform messages analysis of SCTP, M2UA, and M3UA.
Describe H.248 Protocol stack and functions.
Perform message analysis of H.248 based on scenario.
Describe BICC protocol stack and functions.
21
Analysis key parameters of BICC.
Analysis BICC message.
Describe MSC Pool networking.
Perform end-to-end tracing of calls on the MSC Pool.
Describe principles related to the MSC Pool features.
Perform the dynamic data configuration and
between NE and M2000.
modification.
(The load balancing of MSC Pool, Handover in MSC Pool, Disaster tolerance in MSC Pool, Subscriber
Check the data configuration correctness and validity.
migration in MSC Pool, A-Flex by the MGW, Managing
Use the emergency maintenance tools and platform,
A-Interface Circuits on the MGW, Charging based on Virtual MSC IDs or Location Areas).
Describe MSC Pool configuration flow overview.
Perform MSC Pool feature configuration in MSC Server
Perform MSC Pool configuration synchronization
and understand emergency maintenance procedure.
Handle UMG8900 device and service fault and perform emergency recovering.
Perform complex hardware, interfaces, signaling,
and MGW.
service networking troubleshooting.
Perform MSC Pool configuration based on different
Duration
scenarios (NNSF implemented by RNC, NNSF implemented by MGW, Restructure MSC Pool based on current network).
Monitor MSC Pool Load in real time.
Operate performance report of the MSC Pool.
Perform migration of subscribers.
8
21 workdays
Maximum Class Size 16 persons
NGN
8.1 Huawei Certified Network Associate-Huawei NGN Technologies and Device Training Outline Training Mode
Huawei NGN Primary Training OAX01
COMMERCIAL IN CONFIDENCE
Lecture, Hands-on exercise
20 d
22
Target Audience
UMG8900, and execute the common service data
This training program is intended for t hose who are
configuration (TG data configuration, SG data
to take Huawei NGN Primary certification exam
configuration).
and those who hope to learn about basic NGN principles and Huawei NGN equipment.
Outline the service data configuration steps of
Outline the service data configuration steps of MRS6100, and execute the system data configuration
Prerequisites
and the voice file loading.
Be familiar with the Windows operating system.
Know basic functions of the computer network.
and execute the common service data configuration
Objectives
(MTP data configuration, M3UA data configuration).
After the completion of this program, participants
(SNMP data configuration, signaling PROXY and media
Principle Describe the basic concepts, system architecture,
PROXY data configuration).
services, networking and applications of NGN.
Maintenance & Troubleshooting
SoftX3000 (operator authority management, database
stack structure and messages of NGN protocols (MGCP,
backup and restoration, data consistent checking
H.248, SIP, SIGTRAN).
between the host and BAM, log management, alarm management, device management, media gateway
Describe the network topology, services, functions,
management, protocol and signaling management,
system structure, board functions, board indicators,
trunk circuit management, subscriber management, bill
networking, applications and t echnical specifications of
management).
SoftX3000/UMG8900/SG7000/MRS6100/SE2300.
Describe the network topology, services and functions of U-Path.
Perform the routine operation and maintenance of iGWB.
Basic Data Configuration
Perform the routine operation and maintenance of
Explain the functions, features, applications, terms,
Product Introduction
Perform the software installation and the service configuration of U-Path.
Outline the components, services, networking and applications of Huawei U-SYS solution.
Outline the service data configuration steps of SE2300, and execute the common service data configuration
will be able to:
Outline the service data configuration steps of SG7000,
Perform the routine operation and maintenance of UMG8900 (database backup, log management, alarm
Perform the hardware and local office data configuration
management, device management, protocol tracing,
of SoftX3000.
service management).
Perform the hardware data configuration, MGW data
Perform the routine operation and maintenance of
configuration and IP bearer data configuration.
MRS6100 (log management, alarm management,
Perform the hardware data configuration of MRS6100.
device management, message tracing).
Perform the hardware data configuration and local office
SG7000 (database backup, log management, alarm
data configuration of SG7000.
management, device management, signaling tracing).
Data Configuration & acceptance testing
Outline the service data configuration steps of
Perform the routine operation and maintenance of
Perform the routine operation and maintenance of
SoftX3000, and execute the common service data
SE2300 (log management, al arm management, device
configuration (charging data configuration, media
management, signaling PROXY and media PROXY
gateway data configuration, protocol data configuration,
debugging).
SS7 signaling data configuration, routing data
Perform the routine operation and maintenance of
configuration, trunk data configuration, number analysis
U-Path (log management, system status bro wsing, and
data configuration, subscriber data configuration).
bill management).
COMMERCIAL IN CONFIDENCE
23
Maximum Class Size
Perform the common troubleshooting of NGN equipment.
16 persons
Duration 20 workdays
8.2 Huawei Certified Network Professional-Huawei NGN Technologies and Device Training Outline Training Mode
iGWB.
Huawei NGN Secondary Training OAX02
Lecture Hands-on exercise
Describe the system structure and configuration of
11 d
Target Audience
List the means of improving voice quality of NGN.
Describe the working principle and service processing procedure of UMG8900.
Describe the working principle, announcement principle and service processing procedure of MRS6100.
This training program is intended f or those who have pass the Huawei NGN Primary certification exam and those who hope to learn about in-depth
Basic Data Configuration
(number changing data configuration, call barring data
NGN principles and Huawei NGN equipment.
Prerequisites
configuration).
Execute the service data configuration of SG7000 (MTP load sharing data configuration).
At least a half year of experience in the operation and
Data Configuration & acceptance testing
maintenance of NGN
Objectives
Perform the language conversion of voice and voice loading of MRS6100.
Successfully pass the Huawei NGN Primary certification exam
Execute the service data configuration of SoftX3000
Perform data planning and data configuration of NGN dual home.
After the completion of this program, participants
will be able to: Principle
Explain the command parameters and call processing
Maintenance & Troubleshooting
Perform the routine maintenance of NGN dual home.
Perform the common problem analysis and processing
procedure of NGN protocols.
Describe the principle, application of NGN dual home.
Describe the NGN C4 and C5 office migration solution.
Perform the NGN C4 and C5 office migration operation.
of NGN protocols.
Perform the troubleshooting of NGN network.
Duration
Product Introduction
Describe the working principle and service processing procedure of SoftX3000.
Describe the principle, processing procedure, operation and original bill format of NGN charging system
COMMERCIAL IN CONFIDENCE
11 workdays
Maximum Class Size 16 persons
24
9
MGW&SBC
9.1 Huawei Certified Network Associate-Huawei MGW&SBC Technologies and Device Training Outline Training Mode
Know about WCDMA Core Network Evolution and main versions;
NGN/GSM/UMTS Softswitch Fundamental OWA02
Understand the network architecture and function entity of GSM/R99/R4,and the interface and protocol;
Lecture
1d
Understand bearer and control separated architecture;Understand the function and application of
UMG8900 Hardware System OWH10 UMG8900 OWH11
Lecture
MSOFTX3000 and UMG8900;
definition and architecture of NGN and every layer's
1d
functions;Konw about the location of UMG8900 in NGN.
Software&Patch Loading Lecture, Hands-on
Understand the
Understand SIGTRAN's function,M3UA's basic concepts、function and application;
1d
Understand M2UA's concepts、protocol stacks and main parameters;
UMG8900 Data Configuration
Understand UMG8900's TDM bearer and data configuration of SG(MTP3-M3UA);
OWH30
Lecture, Hands-on
2d
Understand SIGTRAN's function,M3UA's basic concepts、function and application;
UMG8900 Routine Operation and Maintenance OWH22
Lecture, Hands-on
parameters;
2d
Lecture, Hands-on
2d
Target Audience UMG8900&SBC Field Maintenance Technicians, Maintenance Technicians/Engineers
Prerequisites At least one year experience of operation and maintenance of GSM NSS/UMTS CS or other
Being familiar with Windows operation
A basic knowledge of mobile communications
Objectives On completion of this program, the participants will be able to:
COMMERCIAL IN CONFIDENCE
Describe the function, indicators, ports and working mode of each board.
Explain the types and applications of different fibers and cables.
Describe the toggle switch in UMG8900.
Perform operation through LMT.
Perform UMG8900 Software&Patch Loading
Describe the UMG8900 data configuration method and procedure.
telecommunication equipments
Describe the UMG8900 system functions, structures and key characteristics.
First Line Maintenance Technicians or Routine
Understand UMG8900's TDM bearer and data configuration of SG(MTP3-M3UA);
SE2600 Operation and Maintenance
OZD04
Understand M2UA's concepts、protocol stacks and main
Edit the data configuration scripts for UMG8900.
Execute the data configuration script.
Perform the dynamic data configuration and modification.
Perform UMG8900 system data, interfaces data and resource data configuration.
25
Perform system data backup and restoration, execute
MML commands, etc.
Understand the operation flow of parts replacement and
Describe related concepts of SBC, working principle of full proxy.
implementing technical protection measures.
Describe main functions and features of SE2600 in IMS network.
Perform UMG8900 parts replacement and check the
Describe call flow analysis.
components running status.
Describe hardware structure of SE2600.
Manage tracing tasks.
Perform interconnection data configuration.
Monitor alarms of UMG8900.
Perform service data configuration.
Perform the routine operation and maintenance tasks
Perform maintenance tasks for SE2600.
(daily, weekly and monthly).
Perform SE2600 troubleshooting.
Understand troubleshooting procedure and common
Duration
troubleshooting methods.
Perform common hardware, interfaces, service troubleshooting.
Perform UMG8900 software&Patch reloading and path upgrading
COMMERCIAL IN CONFIDENCE
9 working days
Class Size max 16
26
10 USC 10.1
Huawei Certified Network Associate-Huawei USC Technologies
and Device Training Outline Training Path
HLR9820V900R006 System Introduction Lecture
List key advantages of Huawei SingleSDB products
Describe HLR9820 hardware structure
Describe all kinds of Buses in ATCA Platform
Describe HLR9820 boards function
Describe connections and cables
2d
Perform System Installation:
Describe processes of System installation
Describe how Huawei SingleSDB system connected
HLR9820V900R006 System Installation Lecture, Hands-on
internal and external
3.5 d
Perform Huawei HLR9820 system installation
Perform Huawei HLR9820 system debugging Perform system data configuration:
HLR9820V900R006 Data Configuration Lecture, Hands-on
3.5 d
Describe data configuration principles and steps
Describe GSM/UMTS network numbering scheme
Describe HLR9820 system hardware& software configuration procedure and reliable specifications
HLR9820V900R006 Subscriber Data Managemen Lecture, Hands-on
Node and module
1d
Target Audience
Perform Hardware Data Configuration
Perform Local Office Data Configuration
Perform Signaling Data Configuration
SingelSDB GUHLR9820 project installation and
Understand HLR9820 Subscriber Management
configuration Engineers;
Procedure:
Prerequisites
Describe UMTS Common Service Feature
Perform operation of templates to manage subscribers’
A basic knowledge of mobile communication
Objectives On completion of this program, the participants will
profiles
Perform operation to manage subscribers’ profiles
Describe the HLR9820 subscriber management method and procedure
be able to: Understand System Structure and Principles:
Describe the architecture of Huawei SingleSDB system
Describe the Networking and Interfaces of Huawei SingleSDB
Describe the hardware, logical structure of Huawei SingleSDB
Describe HLR9820 basic concept: Site, NE, Cluster,
Describe the typical configurations of SingleSDB
Perform operation to modify services according to the requests from subscribers
Perform Subscriber data management
Perform Operator Management
Perform Network maintenance
Perform operation to Check subscribers’ profiles based on different fault phenomena
products
COMMERCIAL IN CONFIDENCE
27
Duration
Class Size
10 working days
10.2
Min 5,max 15
Huawei Certified Network Professional-Huawei USC Technologies
and Device Training Outline
COMMERCIAL IN CONFIDENCE
28
Objectives
Training Mode
On completion of this program, the participants will be able to: HLR9820V900R006 IP Resource Planning and Redundancy Solution Lecture 0.5 d
Describe the internal networking and IP planning of HLR9820
Describe Redundancy Principle and Key parameters of configuration
SingleSDB Redundancy System Commissioning Lecture, Hands-on
Describe DS Principle Data synchronization, consistency and Replication Principle
0.5 d
Describe Baseline establishment, increment data synchronization, recovery operation
maintenance
SingleSDB Operation and Maintenance Lecture, Hands-on
3.5 d
Perform Security Management, Alarm Operations, Message Tracing and Performance Operations
Perform Database backup and restoration
HLRV9 Equipment fault information collection and
SingleSDB Maintenance and Troubleshooting Lecture, Hands-on
Perform LMT MML Operation and HLR9820 routine
processing
1d
Procedures and methods of fault location and troubleshooting: Use the system maintenance tools
Target Audience Senior Technical Support Engineer;
Prerequisites
Successful completion of the program SingleSDB(G/U HLR9820)Engineering Training
Or At least one year experience of HLR9820 operation
Perform system management, cluster management, disk management and Database management
Duration 4 working days
Class Size Min 5,max 15.
11 SG 11.1
Huawei Certified Network Associate-Huawei SG Technologies and
Device Training Outline
COMMERCIAL IN CONFIDENCE
29
Training Mode
Describe the basic function of SCCP.
State the format of SCCP message and the meaning of the message which are often used.
Huawei SG Technologies and Device Training
Lecture Hands-on exercise
5d
Describe the basic concept of SIGTRAN, the structure and signaling procedures of M2PA/M3UA.
Describe SG7000 system structure and hardware architecture, including the cabinet, frame, board and t he
Target Audience
performance features of SG7000. This training program is intended for t hose who are
to take Huawei Certified Network Associate-Huawei SG Technologies and Device certification exam and those who hope t o learn
flow.
Configure the hardware data, narrowband link data and broadband link data.
about basic SG7000 principles and Huawei SG7000 equipment.
Describe SG7000 logical architecture and signaling
Implement the common operation of maintenance such as message tracing, log management, alarm
Prerequisites
management and link mana gement.
Be familiar with the Windows operating system.
Perform SG7000 client software installation.
Know basic functions of the computer network.
Perform SCCP and M2PA data configurati on of
Objectives
SG7000.
Duration After the completion of this program, participants will be able to:
Describe the basic concepts, architecture, MTP functions of SS7 Signaling System and signaling network.
11.2
5 workdays
Maximum Class Size 16 persons
Huawei Certified Network Professional-Huawei SG Technologies
and Device Training Outline Training Mode
Huawei SG Technologies and Device Training Lecture Hands-on exercise
COMMERCIAL IN CONFIDENCE
2d
30
Target Audience
Describe the basic principle of MNP service.
have pass the Huawei Certified Network
Perform SG7000 MTP loadsharing data configuration.
Professional-Huawei SG Technologies and Device
Perform SG7000 SCCP loadsharing data configuration.
certification exam and those who hope t o learn
Describe the troubleshooting method of SG7000.
about in-depth SG7000 principles and Huawei
Perform information collection of SG7000 trouble.
SG7000 equipment.
Locate the hardware trouble, link trouble and SCCP
This training program is intended f or those who
Prerequisites
Successfully pass the Huawei SG7000 Primary certification exam
will be able to:
At least a half year of experience in the operation and
layer trouble.
Duration 2 workdays
Maximum Class Size
maintenance of SG7000
Objectives
16 persons
After the completion of this program, participants
12 GSM 12.1
Huawei Certified Network Associate-Huawei GSM Technologies
and Device Training Outline Training Mode
COMMERCIAL IN CONFIDENCE
31
GSM Huawei Certified Network
(MBTS)
Associate-Huawei GSM Technologies and Device Lecture, Hands-on
5.Master typical configuration of BTS3900/DBS3900
Engineering survey and hardware installation
controller and site
11 d
Target Audience This training program is intended for t hose who are
2.Master the installation design approaches of site controller and site
3.Master the hardware installation approaches of site controller and site (including f eeder system, monitoring,
to take the HCNA certification exam and those who
and other peripherals)
hope to learn about basic GSM principles and
Software Commissioning
Huawei GSM equipment.
Prerequisites
1.Master the engineering survey approaches of site
1.Master the remote and local commissioning approaches of the site
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives
2.Master the site integration approaches
3.Master the site service testing approaches
4.Master the using methods of testing tool and know the meaning of testing indicators
After the completion of this program, participants
Acceptance testing
will be able to: Principles
1.Master the hardware quality standard
2.Master the acceptance approaches of a single-site
1.Understandable of the basic principle of GSM and
(including service testing)
GPRS technology
Maintenance and tr oubleshooting
2.Familiar with GSM system architecture and the
1. Master the site operation& maintenance approaches
wireless network interface
2.Capable of independently dealing with hardware
Product knowledge
1.Master BSC6900 (GSM) system overview, hardware
replacement and information collection of site
3.Capable of independently dealing with site problems
architecture and product specifications
and emergency recovery on-site
2.Master BTS3900/DBS3900 (GSM) hardware
Duration
architecture and module functions
3.Master typical configuration of BTS3900/DBS3900
Maximum Class Size
(GSM)
11 working days
4.Master BTS3900/DBS3900 (MBTS) hardware
20 persons
architecture and module functions
12.2
Huawei Certified Network Professional-Huawei GSM Technologies
and Device Training Outline Training Mode
COMMERCIAL IN CONFIDENCE
32
Huawei Certified Network
2.Understandable of M2000 system architecture and master the operation of client
Professional-Huawei GSM Technologies and Device Lecture, Hands-on
Software Commissioning
1.Capable of independently finishing data configuration of site controller and site through WebLMT and CME
14 d
Target Audience
2.Master the software commissioning approaches of the controller
This training program is intended for t hose who are
3.Capable of independently finishing new site integration through M2000
to take the HCNP certification exam and those who
Acceptance testing
hope to learn about basic GSM principles and
Huawei GSM equipment.
1.Master the acceptance approaches of controller Software Upgrade
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
1.Master the local upgrade approaches of the site
2.Master the remote upgrade approaches of the site Maintenance and tr oubleshooting
Objectives
approaches
Compare with “Huawei Certified Network Associate-Huawei GSM Technologies and Device
follows. After the completion of this program, participants will be able to:
2.Capable of independently dealing with hardware replacement and information collection of controller
Training”, the objectives added are shown as
3.Capable of independently dealing with controller problems and emergency recovery on-site
4. Capable of independently finishing network inspection through NIC and OMSTAR tools
Principles
1.Master the controller operation& maintenance
Duration
1.Understandable of the signaling process of GSM system
14 working days
Product knowledge
Maximum Class Size
1.Master CME configuration tool principles and operational guidance
20 persons.
13 WCDMA 13.1
Huawei Certified Network Associate-Huawei WCDMA
Technologies and Device Training Outline Training Mode
Target Audience This training program is intended for t hose who are to take the HCNA certification exam and those who
HCNA-WCDMA Huawei Certified
hope to learn about basic WCDMA principles and
Network Associate-Huawei WCDMA
Huawei WCDMA equipment.
Technologies and Device Lecture, Hands-on
COMMERCIAL IN CONFIDENCE
Prerequisites 9d
Be familiar with the Windows operating system.
33
Know basic functions of the computer network.
Complete installation design of site
Objectives
Complete hardware installation of site controller
Complete hardware installation of site (including feeder
After the completion of this program, participants will be able to: Describe the basic principle of WCDMA technology
Describe WCDMA system architecture and the wireless network interface Describe BSC6900 (WCDMA) system , hardware architecture and product specifications
Describe BTS3900/DBS3900 (WCDMA) hardware architecture and module functions
Outline typical configuration of BTS3900/DBS3900 (WCDMA)
Complete remote/local commissioning of the site
system, monitoring, and other peripherals)
Describe BTS3900/DBS3900 (MBTS) hardware
Complete site integration
Complete site service testing
Perform testing tool and testing indicators
Hardware installation check
Acceptance of a single-site (including service testing)
Hardware Replacement
Information collection
Deal with problems on site
On-site emergency recovery
Duration
architecture and module functions
Outline typical configuration of BTS3900/DBS3900
9 working days
(MBTS)
Complete engineering survey of site controller
Complete engineering survey of site
Complete installation design of site controller
13.2
Maximum Class Size 20 persons
Huawei Certified Network Professional-Huawei WCDMA
Technologies and Device Training Outline Training Mode
Prerequisites
HCNP-WCDMA Huawei Certified
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Network Professional-Huawei WCDMA
Objectives
Technologies and Device Lecture, Hands-on
After the completion of this program, participants
13 d
Target Audience This training program is intended for t hose who are to take the HCNP certification exam and those who hope to learn about basic WCDMA principles and
will be able to:
Describe WCDMA wireless network architecture
Describe the signaling process of the WCDMA system
Describe BTS3900/DBS3900 (MBTS) hardware
Describe BTS3900/DBS3900 (MBTS) architecture and module functions
Huawei WCDMA equipment.
Outline typical configuration of BTS3900/DBS3900 (MBTS)
COMMERCIAL IN CONFIDENCE
34
Outline CME configuration tool principles and platform
Describe the process of local upgrade of the site
Outline CME configuration tool operation
Complete remote upgrade of the site
Outline the M2000 system architecture and operation
Complete local upgrade of the site
Outline function of the M2000 system
Complete hardware replacement
Perform data configuration for site
Complete Information collection for controller
Perform data configuration for site controller
Deal with problems on site for controller
Complete the process of site data configuration
Complete On-site emergency recovery for controller
Complete the process of site controller data
Duration
configuration
Perform software commissioning of the controller
Describe the process of software commissioning
Perform new site integration through M2000
Describe the process of new site integration
Describe the process of remote upgrade of the site
13 working days
Maximum Class Size 20 persons.
14 CDMA 14.1
Huawei Certified Network Associate-Huawei CDMA Technologies
and Device Training Outline Training Mode
channel Introduction) ;
2.the technical characteristics and network architecture
Huawei CDMA Technologies and Device
of the the Trustar digital trunking communication
Training
system ; Lecture, Hands-on
Product knowledge (4 days)
7~7.5 d
Target Audience
1.BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts products(hardware components, the basic configuration rules and board function.);
This training program is intended for t hose who are to take the HCNA certification exam and those who
2,.the meaning of the BSC6680/BSC6600 /
hope to learn about basic CDMA principles and
RAC6610/MSE9830 controller and bts products, the
Huawei CDMA equipment.
meaning of it’s board indicator light;
Prerequisites
3.BTS3900/BTS36xx series of CDMA base station antenna and feeder cable introduction ( basic knowledge
Be familiar with the Windows operating system.
of radio waves, the ba sic principles of antenna radiation
Know basic functions of the computer network.
of electromagnetic waves, introduced the concept of the
Objectives
antenna transmission cable, the base station ant enna and feeder cable systems) ;
Principles (1 day)
1.cdma2000 1X & 1xEV-DO
basic technology (CDMA
environment of the project site, the power system ,
technology development road signpost、f cdma2000 1X/1xEV-DO technical characteristics and network structure, key technology of cdma2000 1X and UM
alarm boxes, etc.) ;
5.the controller and bts products survey content and survey Note;
channel Introduction、EVDO new technologies and UM
COMMERCIAL IN CONFIDENCE
4.the introduction of complementary products (room
6.the bts hardware distribution, delivery rules, methods,
35
understanding Huawei BOQ and the meaning of t he
procedure of BSC6680/BSC6600/RAC6610/MSE9830
7.controller and base station hardware installation and
board、frame etc.
Data configuration and commissioning
Acceptance Test (1 day) 1.the BTS hardware installation quality inspection content and standards;
1.Grasp the replacement method and operation
packing list;
the Power On Self Test;
2.Grasp the power meter, sitemaster ,test terminal use method;
2.Grasp the replacement method and operation procedure of BTS36xx/39xx serial bts board、BBU etc.
Duration 7~7.5 working days (no practice)
Maximum Class Size 20 persons
Chinese Edition adds the following:
1.the BSC hardware installation quality inspection content and standards; Maintenance and Troubleshooting (1day)
COMMERCIAL IN CONFIDENCE
36
14.2
Huawei Certified Network Professional-Huawei CDMA
Technologies and Device Training Outline Training Mode
Fundamentals) ; Product knowledge (4 days)
Huawei CDMA Technologies and Device
1.BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts products(hardware components, the basic configuration rules and board function.);
Lecture, Hands-on 13.5~16 d
Target Audience
2.the meaning of the BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts products, the meaning of it’s board indicator light;
This training program is intended for t hose who are to take the HCNP certification exam and those who
3.BTS3900/BTS36xx series of CDMA base station
hope to learn about basic CDMA principles and
antenna and feeder cable introduction ( basic knowledge
Huawei CDMA equipment.
of radio waves, the ba sic principles of antenna radiation of electromagnetic waves, introduced the concept of the
Prerequisites
antenna transmission cable, the base station antenna
Be familiar with the Windows operating system.
Know basic functions of the computer network.
and feeder cable systems) ;
Objectives
environment of the project site, the power system , alarm boxes, etc.) ;
Principles (1.5 days +1 day)
1.cdma2000 1X & 1xEV-DO
basic technology (CDMA
1X/1xEV-DO technical characteristics and network
packing list;
channel Introduction、EVDO new technologies and UM
Data configuration and commissioning (2 days +1 day)
system ; 3.Grasp transmission fundamentals (TCPIP protocol and subnetting, Ethernet / VLAN / VRRP / Routing
COMMERCIAL IN CONFIDENCE
7.controller and base station hardware installation and the Power On Self Test;
2.the technical characteristics and network architecture of the the Trustar digital trunking communication
6.the bts hardware distribution, delivery rules, methods, understanding Huawei BOQ and the meaning of t he
structure, key technology of cdma2000 1X and UM channel Introduction) ;
5.the controller and bts products survey content and survey Note;
technology development road signpost、f cdma2000
4.the introduction of complementary products (room
1.the BTS data and software loading process and methodology;
37
2.the BTS data configuration;
3.the BTS basic commissioning procedure;
4.the meaning of the BTS of the Engineering Indicators
Chinese Edition adds the following: (1 day+0.5
(VSWR, RSSI、output power) and test methods,Finish
days)
the BTS troubleshooting and quality inspection under
characteristics;
the guidance. ;
5.the BTS environment alarm configuration, debugging;
6.IP RAN network form and IPRAN BTS data configuration;
content and standards; 3, the LMT maintenance method of signal tracing;
Chinese Edition adds the following (2 days + 2
4,Single BSC acceptance range and standard;
days)
5, the acceptance range and standard of BSC basic
1.BSC6680 controller internal signals (signaling, traffic)
characteristics;
processes procedure, the basic rules of the system
Maintenance and Troubleshooting (2 days + 0.5
configuration;
day)
2.Operation and maintenance system of BSC6680
3.BSC6680 data configuration (the basic configuration
36xx/39xx Series BTS and
CDMA BSC6680 hardware, clock, interface, cell, carrier,
RAC6610/BSC6600/BSC6680 ,basic information
and cdma2000 1X/1xEV-DO business data
collection methods, analysis and p rocess the common
configuration) ;
fault alarm base on online help;
4.BSC6680 signaling procedure(voice, data services,
5.the BSC data configuration under IP RAN network;
4.Grasp MSE9830 board replacement methods, procedure and information collection methods;
5.To understand the common fault scenarios of the 36xx/39xx Series bts, to grasp the emergency fault
1.the BTS hardware installation quality inspection
information collection and recovery measures, quickly
content and standards;
recovery according the guidance;
2.the BTS software installation quality inspection content and standards;
3.Familiar with the daily operation &maintenance of the
of BSC6680 system,, the file loading procedure, the
Acceptance Test (1 day+ 0.5 days)
2.Familiar with some of the commonly used test tools (sitemaster, power meter, test phone, etc.)
short message, handoff signaling process) ;
1.Grasp the replacement method of spare parts, clear procedure key points;
structure, the internal IP network, IP address planning) ;
2.the BSC software installation quality inspection
system networking, maintenance system software
1.the BSC hardware installation quality inspection content and standards;
(CDMA BSC6680 maintenance system agencies,
6.the acceptance range and standard of BTS basic
6.the use method of FMA tools
Duration
3.the LMT maintenance method of RSSI,VSWR, Transmit power tracing;
4.Single BTS acceptance range and standard;
5.Grasp the power meter, sitemaster ,test terminal use
13.5~16 working days (no practice)
Maximum Class Size 20 persons.
method;
COMMERCIAL IN CONFIDENCE
38
15 Wimax 15.1
Huawei Certified Network Professional-Huawei Wimax
Technologies and Device Training Outline Training Mode
Huawei Certified Network Professional-Huawei Wimax Technologies and Device Lecture, Hands-on
8d
Target Audience This training program is intended for t hose who are
Outline DBS3900 WiMAX functions
Outline each board function of DBS3900 WiMAX
Complete the inside connection of DBS3900
State the typical networking configuration
Describe WiMAX Network Structure
Master the local operation and remote operation
Complete daily maintenance tasks
Complet the concept related to configuration Management
to take the Wimax certification exam and th ose who hope to l earn about basic Wimax principles and Huawei Wimax equipment.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives After the completion of this program, participants will be able to:
Describe OFDM/OFDMA Basics
Describe WiMAX Features
Describe WiMAX Applications
Describe WiMAX system networking
Outline each board function of DBS3900 WiMAX
Complete the inside connection of DBS3900
State the typical networking configuration
Describe WiMAX system networking
COMMERCIAL IN CONFIDENCE
Complet how to perform configuration Management
Finish basic data configuration for WiMAX DBS3900
Describe the two types of commissioning
Perform local commissioning
Perform remote commissioning
Describe How to install DBS3900 in site
Describe how to install Antena system
Finish bacis function Acceptance.
Can be done
Complete daily maintenance tasks
Deriver test
Can be change board basicly
Duration 8 workdays
Maximum Class Size 16 persons
39
16 GSM RNP&RNO 16.1
Huawei Certified Network Associate- Huawei GSM RNP&RNO
Technology Training Outline Training Mode
Planning knowledges
Familiar with radio transmission theoretics and the usual transmission model.
Huawei Certified Network
Optimization knowledges
Associate-Huawei GSM RNP&RNO Technologies Training
Capable of independently writing the analysis of electromagnetic interference, and providing preliminary
Lecture,Hands-on
7d
Target Audience
resolutions for the target area accordingly.
Capable of independently finishing site survey and report upon request.
This training program is intended for those who are to
take the HCNA GSM RNP&RNO certification exam.
Prerequisites
Skilled in windows operating system.
Capable of describing the basic functions of computer
radio parameters and quality of a ntenna.
Skilled in using business softwares like office and
problems of DT/CQT by Genex Assistant and deliver resolutions accordingly.
Capable of describing the basic functions of mobile communication.
Objectives Principle
Understandable of the GSM basic theories /wireless transmission /telecomunicatios as well as at tenna and
Capable of dealing with common customer’s complaint by DT/CQT.
outlook.
Capable of independently accomplishing DT/CQT test (single site verification) by Genex Porbe, analyzing the
network.
Capable of independently using related tools to survey
Familiar with the meaning and adjusting regulations of commonly used Network Design parameters.
Duration 7 workdays
Maximum Class Size 16 persons
associated parameters.
COMMERCIAL IN CONFIDENCE
40
16.2
Huawei Certified Network Professional - Huawei GSM RNP&RNO
Technology Training Outline Training Mode
Master the GSM coverage planning, capacity planning, neighbor/frequency design, location area design, parameters design and GPRS planning.
Huawei Certified Network Professional-Huawei
GSM RNP&RNO Technologies Training
Lecture,Hands-on
of Network Design.
8d
Target Audience This training program is intended for t hose who are
Master the way of CW testing and related data processing.
Master the corrective procedure of transmission model. Optimization knowledges
to take the HCNP GSM RNP&RNO certification exam.
Master the related parameters and adjusting regulations
Master the RF optimazition & procedure, methods and tools, capable of processing GSM radio network RF
Prerequisites
optimazition.
Skilled in windows operating system.
Skilled in using business softwares like office and outlook .
Master the definition of traffic statistics and counter point in the wireless side of G SM Network.
Master GSM common KPI analysis and network
Capable of describing the basic functions of mobile
problem solution, such as drop call, handover, voice
communication.
quality and data traffic.
Have qualifications for HCNA-Huawei GSM RNP&RNO
Capable of independently completing network
Technologies.
optimazition reports and generating problem analysis
Objectives
reports.
Principle
Familiar with GSM communication theory.
Master wireless network planning and optimazition
Duration 8workdays
Maximum Class Size
process. Planning knowledges
COMMERCIAL IN CONFIDENCE
16 persons
41
17 WCDMA RNP&RNO 17.1
Huawei Certified Network Associate-WCDMA RNP&RNO Training
Outline Training Mode
Familiar with the theory of radio propagation and common propagation models. Optimization knowledges
Huawei Certified Network Associate-WCDMA RNP&RNO Training Lecture,Hands-on
analysis, and existence of the interference region is
7d
Target Audience This training program is intended for t hose who are to take the Huawei Certified Network
given a preliminary settlement proposals.
Be able to independently asked to complete the site investigation and reporting.
Be able to use the tools to verify the wireless working parameters and the quality of the antenna and cable
Associate-WCDMA RNP&RNO certification exam.
Prerequisites
Independent output electromagnetic interference
correction.
Be able to independently use the Genex Probe,
Skilled in windows operating system.
completion of DT / CQT testing (including single-station
Skilled in using business softwares like office and
verification), Genex Assistant analysis of the problem in
outlook.
the DT / CQT, the output of the corresponding solutions.
Capable of describing the basic functions of mobile communication.
Deal with general customer complaints by DT / CQT.
Grasp the road test KPI the meaning and the testing method, independent production test program and
Objectives
complete. Principle
Master the cell parameters to verify the method, familiar
Understandable of the WCDMA basic theories, wireless
with the meaning of the parameters and adjust the basis
transmission, telecomunicatios, attenna and associated
of the common network rules.
parameters.
Duration
Planning knowledges
Master antenna selection.
Initial grasp of network planning and optimization process, familiar with the site survey, RF Tuning
7 workdays
Maximum Class Size 16 persons
process.
17.2
Huawei Certified Network Professional-WCDMA RNP&RNO
Training Outline
COMMERCIAL IN CONFIDENCE
42
Training Mode
and neighbor / frequency planning, LAC planning, scrambling code planning.
Huawei Certified Network Professional-WCDMA
RNP&RNO Training
Lecture,Hands-on
and adjustment of principles.
11 d
Target Audience
Optimization knowledges
exam.
Prerequisites
Skilled in windows operating system.
Skilled in using business softwares like office and
Master the definition of traffic statistics and counter point in the wireless side of G SM Network.
To master the problems of the common words of WCDMA system KPI analysis and network processing, familiar, then the system KPIs (Access, retention and
Capable of describing the basic functions of mobile communication.
mobility)optimization method.
Have qualifications for HCNA-Huawei WCDMA RNP&RNO Technologies.
Objectives Principle
Familiar with the WCDMA communication theory.
Master the wireless network planning and optimization process. Planning knowledges
Master the RF optimization of processes, methods, tools, with network RF optimization capabilities.
outlook.
Master the propagation model calibration processes, methods.
to take the Huawei Certified Network Professional-WCDMA RNP&RNO certification
Grasp the CW test method, the CW test data processing.
This training program is intended for t hose who are
Grasp the relevant parameters of the network planning
Familiar with Huawei UMTS RNC maintenance operations.
Able to independently finish the network optimization reporting and problem analysis report writing.
Duration 11workdays
Maximum Class Size 16 persons
Master the UMTS coverage planning, capacity planning,
18 CDMA RNP&RNO 18.1
Huawei Certified Network Associate-Huawei CDMA RNP&RNO
Technologies Training Outline
COMMERCIAL IN CONFIDENCE
43
Training Mode
Familiar with radio transmission theoretics and the usual transmission model.
Optimization knowledges
Huawei Certified Network Associate-Huawei CDMA RNP&RNO
Capable of independently writing the analysis of electromagnetic interference, a nd providing preliminary
TechnologiesTraining
resolutions for the target area accordingly. Lecture,Hands-on
8d
report upon request.
Target Audience
This training program is intended for t hose who are to take the HCNA CDMA RNP&RNO certification
Skilled in using business softwares like office and
problems of DT/CQT by Navigator and deliver resolutions accordingly
Capable of describing the basic functions of mobile communication.
Objectives Principle
Understandable of the CDMA basic theories /wireless transmission /telecomunicatios as well as attenna and
Capable of dealing with common customer’s complaint by DT/CQT.
outlook.
Capable of independently accomplishing DT/CQT test(single site verification) by Pioneer, analyzing the
Prerequisites Skilled in windows operating system.
Capable of independently using related tools to survey radio parameters and quality of a ntenna.
exam.
Capable of independently finishing site survey and
Familiar with the meaning and adjusting regulations of commonly used Network Design parameters.
Duration 8 workdays
Maximum Class Size 16 persons
associated parameters. Planning knowledges
18.2
Huawei Certified Network Professional-Huawei CDMA RNP&RNO
Technologies Training Outline
COMMERCIAL IN CONFIDENCE
44
Training Mode
Master the Network structure of multi-trxs , familiar with the theories of PN, LAC and Neighbour design.
Huawei Certified Network Professional-Huawei
CDMA RNP&RNO Technologies Training
Lecture,Hands-on
processing.
8d
Target Audience
Master the corrective procedure of transmission model.
Master the related parameters and adjusting regulations of Network Design. Optimization knowledges
This training program is intended for t hose who are to take the HCNP CDMA RNP&RNO certification
exam.
optimazition.
Skilled in windows operating system.
Skilled in using business softwares like office and
quality and data traffic .
Have qualifications for HCNA-Huawei CDMA RNP&RNO Technologies.
Objectives Principle
Familiar with CDMA communication theory.
Master wireless network planning and optimazition process.
Master CDMA common KPI analysis and network problem solution, such as drop call, h andover, voice
Capable of describing the basic functions of mobile communication.
Master the definition of traffic statistics and counter point in the wireless side of CDMA Network.
outlook .
Master the RF optimazition & procedure, methods and tools, capable of processing GSM radio network RF
Prerequisites
Master the way of CW testing and related data
Familiar with operating on HUA WEI CDMA BSC’s flatform;
Capable of independently completing network optimazition reports and generating problem analysis reports.
Duration 8 workdays
Maximum Class Size
Planning knowledges
Master the elements which impact on coverage and
16 persons
capacity. Familiar with the basic principle of power configuration.
COMMERCIAL IN CONFIDENCE
45
19 Microwave RNP 19.1
Huawei Certified Network Associate-Huawei Microwave RNP
Technologies Training Outline Training Mode
will be able to:
Huawei Certified Network Associate-Huawei
Lecture,Hands-on excercise
theory and
understand electromagnetic wave propagate model i n
Microwave RNP Technologies Training TA08
Describe the wireless radio-technology free space.
3d
Target Audience
Complete site LOS survey report independent.
Complete performance calculation for microwave links independent.
This training program is intended for t hose who are
to take the Microwave planning certification exam and those who hope to learn basic microwave transmission principles and LOS survey process, and basic TCP/IP knowledge.
Be familiar with popular parameters on microwave planning, and performance adjustment methods
Be familiar with basic TCP/IP knowledge and Ethernet principle.
Duration
Prerequisites 3 Working days
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives
Maximum Class Size 16 persons
After the completion of this program, participants
COMMERCIAL IN CONFIDENCE
46
19.2
Huawei Certified Network Professional-Huawei Microwave RNP
Technologies Training Outline Training Mode
will be able to:
Huawei Certified Network Professional-Huawei
With primary engineer requirements.
Be familiar with microwave telecom principle and TDM , Hybrid and IP radio working principle.
Microwave RNP Technologies Training TA08
Lecture,Hands-on excercise
3d
Target Audience
Complete primary planning for network topology and capacity.
Be familiar with common frequency band and air channel allocation regulation, could complete frequency
This training program is intended for t hose who are
design and interference analysis for middle scale
to take the Microwave planning advanced
network
certification exam,and those who hope to learn
about frequency planning, interference analysis and Ethernet traffic design.
optimize method.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
With hardware installation and commissioning experience of Microwave or optical
Knowledge about Microwave telecom common principle.
Be familiar with microwave link design process and
Understand deeply common KPI of microwave design and parameters selection regulations.
Complete general evaluation for microwave network and afford related design suggestions.
Manage the microwave planning team.
Duration 3 Working days
Maximum Class Size
Objectives 16 persons After the completion of this program, participants
COMMERCIAL IN CONFIDENCE
47
20 Site and Power System 20.1
Huawei Certified Network Associate- -Huawei Site and Power
System Technology and Device Training Outline Training Mode
Describe the structure, functions and features of ITS1000M and Power3000 Solution.
Huawei Certified Network Associate- -Huawei Site and Power System Technology and Device Training ODC01
Lecture, Hands-on
9d
Target Audience
parts.
Perform ITS1000M and Power3000 Solution operation and maintenance, etc.
Locate and eliminate faults, get experience from troubleshooting practice.
ITS1000M and Power3000 equipment.
Prerequisites
Execute the Field operation, such as Battery replacement.
exam and those who hope to learn about basic ITS1000M and Power3000 principles and Huawei
Outline the load capacity and ability of ITS1000M and Power3000 Solution.
This training program is intended for t hose who are to take the Site and Power System certification
Explain the functions and specifications of different
Remote update software
Duration
Having working experience in the operation and maintenance of Power3000.
Be familiar with Battery group.
Objectives
9 workdays
Maximum Class Size 12 persons
After the completion of this program, participants will be able to:
COMMERCIAL IN CONFIDENCE
48
21 Hybrid Power Supply 21.1
Huawei Certified Network Associate- Huawei Hybrid Power Supply
Technology and Device Training Outline Training Mode
Describe the structure, functions and features of Power1000 and Power2000 Solution.
Huawei Certified Hybrid Power Supply — Huawei
Hybrid Power Supply Technology and Device ODC00
parts.
9d
Lecture, Hands-on
Target Audience
Outline the load capacity and ability of Power1000 and Power2000 Solution.
This training program is intended for t hose who are
and those who hope to learn about basic
Perform Power1000 and Power2000 Solution operation and maintenance, etc.
Power1000 and Power2000 principles and Huawei Power1000 and Power2000 equipment.
Execute the Field operation, such as Battery replacement.
to take the Hybrid Power Supply certification exam
Locate and eliminate faults, get experience from troubleshooting practice.
Prerequisites
Explain the functions and specifications of different
Having working experience in the operation and
Remote update software
Duration
maintenance of D.G.
9 workdays
Be familiar with Battery group.
Maximum Class Size
Objectives
12 persons
After the completion of this program, participants will be able to:
22 Hardware Installation Supervision (excluding RF products) 22.1
Huawei Certified Network Associate-Hardware Installation
Supervision (excluding RF products) Training Outline Training Arrangement
Entrance Requirements
Huawei certification of telecommunications
equipment hard mounted Coaching Lectures,
Huawei hardware installation personnel and Huawei hardware installation sub-contractors
5 days
Dedicated personnel with basic electronic knowledge and electrician skills
Trainees
Objectives
Personnel who attend the certification test of hardware installation for Huawei telecom
Upon completion of this training pr ogram, the
equipment
trainees will understand the follo wing subjects:
Personnel who hope to know more about
hardware maintenance and troubleshooting of Huawei equipment
COMMERCIAL IN CONFIDENCE
Introduction to EHS management during engineering delivery
Telecom installation specifications
49
Specifications on common tools and wireless products
Specifications on installing and laying out cables
installation
Cable connector production
Required knowledge about installability
User guide for common tools of communication project
MA5600 hardware installation guide
SOP of OptiX OSN 3500
Guide to core network UMG8900 cabinet cascaded
Duration Five routine working days
Maximum number of trainees 20
optical fiber installation (2008.05.20)
Core network hardware installation training material
23 Hardware Installation Supervision (including RF products) 23.1
Huawei Certified Network Associate-Hardware Installation
Supervision (including RF products) Training Outline Huawei equipment
Training Arrangement
Entrance Requirements Huawei certification of telecommunications equipment hard mounted Coaching Lectures,
Huawei hardware installation personnel and Huawei hardware installation sub-contractors
6 days
Dedicated personnel with basic electronic knowledge and electrician skills
Trainees
Contents Personnel who attend the certification test of hardware installation for Huawei telecom
Upon completion of this training pr ogram, the
equipment
trainees will understand the follo wing subjects:
Personnel who hope to know more about hardware maintenance and troubleshooting of
COMMERCIAL IN CONFIDENCE
Introduction to EHS management during engineering delivery
50
View more...
Comments