HPTZ tattooing motherboard handout

HP tattoo (flash) procedures Tattooing replacement motherboards with desktop management information (DMI) 1. Download the DMI utility from HP Techport (www www.te .tech chport port.info/ .info/ reflib/ reflib/ tattoo tattoo// dnld_tat dnld_tattoo toos s.htm .htm). 2. Create a bootable floppy disc or CD and then set the system boot order to boot from the floppy or CD. 3. Gather the necessary DMI listed below to tattoo onto the motherboard. You can find most of the DMI located on two labels on the PC shown at the bottom of the page. • Build ID (BID): (BID): A ten-character, alphanumeric, case-sensitive string. Example: 64NAemMPA4 • Serial number: number: Ten or 12 characters (bytes). The first two characters must be letters; the last eight or ten characters are a mixture of letters and numbers. Example: US12345678 HWBOM number (hardware bill of materials): Three numeric characters designated during manufacturing • that define the software load parameters for the recovery application. (NOTE: Units released from 200320 05 lis li sted the FeatureByte eatureByte as the HWB HW BO M.) M. ) Example: Example: 1 0 1 (default) • RIN or SWBOM (recovery (recovery ID number number or softwa oftware re bil b illl of materia materia ls): ls): Four alpha a lphanum numeric, eric, casecase-sensiti ensitive ve characters that the recovery application uses to validate whether the model is supported by the recovery application. Example: NA43 • Product number: number : Six alphanumeric characters. Refurbished units have an "R" at the end of the string; however, do not enter this letter, or the utility will not recognize the string. The product number appears as the system number on the label. Example: PE1234A Language code: code: For the United States and Canada enter ABA. • • Model number: number : A three- to seven-character string. Examples: 450, 4555, XL45C, LK0123 or 12UU345 • Channel: Channel : A customization string. Use the default value, which should be RE (retail). Optional code ode:: Ente Enterr " 0" for new units and " 1" for refurbished refurbished units units.. • • Motherboard Motherboard name: name: This This is on the label of o f the motherboard motherboard packagi packa ging ng (see (see below). below ). (N O TE: For versio version n dmi316 or greater, accept the default value.) Examples: Amethyst, Emery, Emery2, Goldfish 3 FeatureByte: FeatureByte: This defines the hardware and software components. Enter the entire FeatureByte case-sensitive • string, i ncluding ncluding the final final characters characters after the the period, as in " .dB" in the midd middle le label b elow. However, However, you do N O T need to enter the spaces pa ces in between b etween the sets sets of characters. char acters. They They are disrega d isregarded rded.. Example: Onx1114 00.3 w3j3 22u333 b3m383c2n2S2P b3m383c2n2S2P2z3g2 2z3g2 U.d U.dB B 4. Load the bootable floppy or CD and boot the PC. 5. Enter the DMI that you have gathered, following the prompts, and then verify the DMI. 6. Remove the floppy or CD and reboot the PC.

Label on bottom of PC

Label on back of PC

Motherboard Motherboar d box label lab el

Clearing DMI from replacement hard drives 1. 2. 3. 4. 5.

Download the HDD DMI utility from HP Techport (www www.te .tech chport.in port.info/ fo/ reflib/ reflib/ tattoo tattoo// dnld_tat dnld_tattoos toos.ht .htm m). Create a bootable floppy or CD. Then insert the floppy or CD and reboot the system. Clear the HDD DMI. Remove the floppy or CD and reboot the system. Reboot the system.

H

Published January 8, 2007 Visit Visit www .hptechzone.c .hptechzone.com om  © 2007 Hewlett-Packard Development Company, L.P.