How to Port Custom ROMs for MTK SoCs (All Chipsets)1

December 20, 2018 | Author: Airo Lah | Category: Android (Operating System), Booting, Free Mobile Software, Read Only Memory, Smartphone
Share Embed Donate


Short Description

pengetahuan...

Description

XposedGeek Trade facts figures & resources for over 180 countries worldwide.

 Ads by Google

► ROM

► MTK

► Android 4.4

► USB Port

CUSTOM ROM / TUTORIAL

 372 NEXT STORY

Get Android L Google Play Store in Your

How To Port Custom ROMs [For All MTK Chipsets] BY ROHAN ARYA · ARYA · AUG 7, 2014

Android Phone

PREVIOUS STORY



How To Port PhilZ/CTR/CWM/TWRP Recovery to your Phone

Do you want to port Custom ROM to your MTK phone? It’s obviously obviously a wish of      many people to port custom rom to their phone phone and enjoy new f eatures    and UI in their device. By following this tutorial, you you can easily port Custom Custom ROM to your MediaTek (MTK) ChipSet phone! I bought Micromax A106 Unite 2 in May and and rooted it of of course. course. Because I never had an experience with MTK before,  before,  I didn’t know about MTK porting. I looked into it’s system folders and other. Also I had asked my friends like Rohan Taneja for help to port Custom Custom ROM to my device. He helped me much in learning  learning  of MTK porting. Finally Iwas Iwas able to port ROMs without any bugs. I have already posted about this in XDA, but I thought posting in blog will make it much easier f or   people to comment because I have enabled Anonymous commenting so users can comment here without even putting their name. I will try to explain this guide in brief as I can so I don’t think anyone will have doubts left. In case if you have any doubts you can post your comment and I will reply it as soon as possible. This is for all MT65xx chipsets including: MT6577 MT6582 MT6589 MT6592

 To search type and hit enter



 – Pic Credits:



This guide is only for MTK! This will work from same chip to same chip for    example MT6582 to MT6582 or MT6577 to MT6577, MT6592 to MT6592. To port Custom ROM, all you need to have is a device with same SoC and it’s Custom ROM with your own Stock ROM.

Requirements to Port Custom ROM to your MTK device: A Custom Recovery: If you don’t have follow follow this  this tutorial to port one! Custom ROM (from a device with almost same specifications and SoC). Your Stock ROM. Some devices have different partitions to flash and the ROM you might flash can brick your phone. It can even hard brick your phone. So it is recommended that you do a ReadBack, ClockWorkMod Backup and MTK Droid Root & Tools backup. This tutorial [Port Custom ROM to your MTK phone] is 100% working, but still we won’t take the GUARANTEE what happens to your    device! What you need to Port Custom ROM to your device [Your Chipset to Your Chipset only ]: ]: The ROM you need to port [in .zip]. Your stock ROM [extracted with /system and build.prop]. How To Port Custom ROM to your Phone:

Extract the ROM you need to port and you will have these main things: META-INF System boot.img.. boot.img If you have them then you are ready for next step. Open /system folder of stock and rom to port. Open bin folder of stock ROM and copy these files. pq vold

 – Pic Credits:



This guide is only for MTK! This will work from same chip to same chip for    example MT6582 to MT6582 or MT6577 to MT6577, MT6592 to MT6592. To port Custom ROM, all you need to have is a device with same SoC and it’s Custom ROM with your own Stock ROM.

Requirements to Port Custom ROM to your MTK device: A Custom Recovery: If you don’t have follow follow this  this tutorial to port one! Custom ROM (from a device with almost same specifications and SoC). Your Stock ROM. Some devices have different partitions to flash and the ROM you might flash can brick your phone. It can even hard brick your phone. So it is recommended that you do a ReadBack, ClockWorkMod Backup and MTK Droid Root & Tools backup. This tutorial [Port Custom ROM to your MTK phone] is 100% working, but still we won’t take the GUARANTEE what happens to your    device! What you need to Port Custom ROM to your device [Your Chipset to Your Chipset only ]: ]: The ROM you need to port [in .zip]. Your stock ROM [extracted with /system and build.prop]. How To Port Custom ROM to your Phone:

Extract the ROM you need to port and you will have these main things: META-INF System boot.img.. boot.img If you have them then you are ready for next step. Open /system folder of stock and rom to port. Open bin folder of stock ROM and copy these files. pq vold

Now replace these files in ROM to Port‘s /System/Bin folder. Open /System/lib folder of Stock ROM and get these files: libcamalgo.so libcamdrv.so libcameracustom.so libdpframework.so libsensorservice.so libsync.so libvcodecdrv.so

Replace all the files mention above to ROM to Port‘s /system/lib folder. Now open Stock ROM’s /system/etc/ folder and copy these files:

apns.conf.xml vold.fstab vold.fstab.nand

Now replace these files in ROM to port‘s /system/etc folder. Delete these folders from ROM to Port: /System/vendor/ /System/lib/hw /System/lib/modules/ /System/etc/WiFi /System/etc/Firmware Replace these folders from Stock ROM to ROM to Port: /System/lib/hw/ /System/lib/modules/ /System/etc/firmware/ /System/etc/wifi/ /System/vendor/

The final step! Press back button to go to the main folder where you have the Stock ROM. Copy boot.img [From Stock ROM]and replace it with the ROM to Port‘s. You are ready! Go ahead and flash the ROM! Porting ROM was an easy task. Wasn’t it? But if this is your first port, then obviously your ROM might have some bugs in it. Now?  Comment below with the problem you are facing in your ROM so that I can help you! Share this:



Tags:





How To Port Custom ROMs MTK

Port MTK Custom ROMs

Porting MTK ROMs easily

Rohan Arya 

Rohan is CEO of XposedGeek who with his hard work has setup this blog and is posting tricks regularly along with his studies. Currently, he is in 10th and he's interested in Gizmos, new gadgets and especially Android! :)

 YOU MAY ALSO LIKE...

1

 12

How To Fix “Insufficient Storage” in Android Phones

How To Unroot Any Android Phone

1 OCT,

2014

6 SEP,

0

How To Fix “Missing: Updated” Error in ebmaster Tools 26 FEB,

2014

2015

372 RESPONSES  Comments 372 udic

 Pingbacks 0

  Aug 18, 2014 at 9:51 pm

Hello friend, I have a Samsung GT-i9500 Galaxy S4 MT6572 (MediaTek). I’ve spent a ROM for MT6589 and failed because as expected really is a MT6572. I have re-run the Backup ROM originally had and I have recovered after that turn and enter the recovery mode and fastboot. The problem is that when in normal mode (turn on) the screen goes black and does not leave much else. What do you recommend me about it? as getting the version of Android to retrieve the Backup running. Thanks for the help and read us … Reply Rohan Arya



 Aug 19, 2014 at

9:50 am

Can you please be more specific and tell me which way you are trying to restore your phone? Using a custom recovery or SP Tools? Reply deadgod



 Aug 28,

2015 at 8:24 pm

How to extract stock ROM with /system and build.prop??????? Please help me fast. Q. Does this porting works on all mtk devices??????? Reply



Rohan



Arya

Aug 29, 2015 at 10:02 am

Yup. Works with almost all chipsets. Reply Rigs



Aug 31, 2015 at 8:53 am

…your tutorial is very hard to follow. Can you share a step by step tutorial? how do I copy files to my phone and should I have a pc to follow your guide? ….thanks



Rohan



Arya

Aug 31, 2015 at 1:23

pm

Hi, you will need to backup the stock ROM (You can do this by “adb pull /system” command) and then get files from it.. After getting the files, replace them with the ROM you need to port and the files are mentioned here so I don’t think there should be any problems. deadgod



 Aug 28,

2015 at 8:25 pm

How to extract stock ROM with /system and build.prop??????? Please help me fast. Reply



Rohan



Arya

Aug 29, 2015 at 10:01 am

Use this ADB comment- adb pull /system/ Reply deadgod



 Aug 28,

2015 at 8:31 pm

How to extract stock ROM with /system and build.prop??????? Please help me fas Reply Anonymous

  Nov 5, 2014 at 2:19 am

How about mt 6571 kitkat sir??? Reply Jagan Rao



 Nov 6, 2014 at 3:50 am

hi sir im having karbonn a2+(mt6575) .i download custom rom for mt6575.how can i port rom?? plz help me. Reply Rohan Arya



 Nov 6, 2014 at 5:48

am

See the tutorial mentioned here, it’s for porting ROM only. Reply Tasfaout Yassine



 Nov 10, 2014 at 5:15 pm

Thanks for this great blog post but what about the build.prop as you didn’t mentioned it Reply Rohan Arya



 Nov 12, 2014 at

9:43 am

To port the ROM you don’t need it, but to fix rotation, you will need to patch one line, so it’s not that important and that’s why I skipped build.prop! Reply Tasfaout Yassine



 Nov 12, 2014 at

4:39 pm

Thanks again for the clarification i ported a cm11 to mt6589 device but i am stuck a cyanogen boot loop any idea how to solve it someone said to me it’s a kernel conflit. Reply Rohan Arya



 Nov 13, 2014 at

9:52 am

Hi, did you get the CyanogenMod boot animation and it stuck there? If the device is running on Android 4.4.4 and you port CM11 ROM, then it should run well and good, BUT if your phone is running on Android 4.2.x or 4.4.2 (which is probably the case), then the ROM won’t boot. Reply Tasfaout Yassine



 Dec 3, 2014 at 5:14

pm

Hi, yes i reached the boot animation and yes i am on jellybean 4.2.1. can we solve this issue ;(( ? Thank you Reply

Tasfaout Yassine



 Dec 3, 2014 at 5:35

pm

This comment has been removed by the author. Reply Tasfaout Yassine



 Dec 3, 2014 at 5:36

pm

I found the kernel soucre in here but i have no idea how to use it to get to android 4.4 pleas help http://www.hacktohell.org/2013/07/mediatek-mt6589-completesource.html#.VH9F9jGG_uQ Reply Rohan Arya



 Dec 5, 2014 at

11:12 am

It stuck at boot animation? Are you trying to port LeWa OS, ColorOS or any OEM based OS? Reply Tasfaout Yassine



 Dec 5, 2014 at 4:59

pm

No it’s Cyanogenmod 11 for micromax a116 wich basically is an mt6589 device and i ported it to my Hisense U970 also an mt6589 device with the same spec as micromax a116 5inch 1.2ghz cup 1gb of ram. Reply Anonymous

  Nov 12, 2014 at 11:07 am

CYANOGENMOD 11 for android one devices(mt6582) is out and can i port it to mmx a106 unite 2(mt6582)? Reply Rohan Arya



 Nov 13, 2014 at

9:53 am

Sorry, but as per I know you can’t because it’s (MMX U2) based on Android 4.4.2 whereas the ROM is based on Android 4.4.4. Reply Wasif



 Apr 22,

2015 at 11:54 am

I have cubot s308 with 4.2.2 and same Mtk6582 cubot release 4.4.2 rom its availbe but when i flashed it it wont boot is it due to kernel issue ? how can i fix this Reply



Rohan



Arya

Apr 22, 2015 at 1:27 pm

If the KitKat ROM is officially available or some people booted it then probably it didn’t work because: 1. You didn’t choose “FIRMWARE UPGRADE” and rather used “DOWNLOAD ONLY”. 2. You have 4 GB model and the ROM is for 8 GB.. Reply Wasif



Apr 22, 2015 at 1:35 pm

so i cannot come to fix this 4GB to 8 GB rom issue ? to install kitkat on cubot s308 ? And doogee released lolipop for mtk6582 can i port this to our cubot s308 ? Rahul Mule



 Nov 15, 2014 at 8:54 am

I want to port rom for unite 2 so suggest me ROM based on mtk6582 Reply

Rohan Arya



 Nov 18, 2014 at

10:05 am

Kindly search for the devices with MT6582 SoC and r est can be seen from NeedRom website. Reply Anonymous

  Nov 20, 2014 at 1:21 pm

Hi, I have a Star S7189 mt6582 android 4.2 and I saw that others mt6582 phone have android 4.4 rom. I wanna know how I can port the 4.4 from other phone to my 4.2 phone, remembering both has mt6582 processor and both uses 854×480 screen resolution. Reply Rohan Arya



 Nov 21, 2014 at

9:23 am

Unfortunately, you cannot do so until you have kernel source. [-( Reply Anonymous



 Nov 24, 2014 at

7:10 am

what do you mean about kernel source, i want kitkat on my jellybean based MTK6582 :/ Reply Anonymous

  Nov 22, 2014 at 3:18 pm

Hello, i want to understand what” your chipset to your chipset” means?? Reply Rohan Arya



 Nov 24, 2014 at

4:51 am

It means your SoC. Like “MT6572”, “Mt6589”, “MT6582”, etc. Reply Anonymous

  Nov 27, 2014 at 7:15 am

sir I port xperia papyrus ROM(mtk6572) to my mtk6572 device…… every thing is OK but & I run the ROM successfully..but the problem is – the phone r eboot automatically & when I switch WiFi on the system auto reboot……please give me a helpful solution…… waiting for your response.. Reply Shamsul Arefin Sajib

  Nov 28, 2014 at 8:21 pm

Sir after porting how to fix invert r otation of display mtk 6582 Reply Rohan Arya



 Nov 30, 2014 at

4:01 am

Add this line in build.prop (separate line): “ro.sf.hwrotation=180”. If such line exists and it’s value is “0”, then replace it with “180”, or if it’s value is “180”, then make it “0. Reply Anonymous

  Dec 3, 2014 at 3:05 am

what about meta-inf folder did updater script need any modification. Reply Rohan Arya



 Dec 3, 2014 at 9:20

am

Yes, you will need to modify. I didn’t mention because for newbies, it would be a pr oblem. But most probably if you port from the same chipset and your OEM is not a big one like Samsung, then you probably don’t need to edit META-INF. Reply Anonymous

  Dec 5, 2014 at 8:35 am

dear sir, whenever i try to flash in cwm recovery mode it shows :openig update package …. intalling update.. installing aborted. no files found.. please help me sir Reply Rohan Arya



 Dec 5, 2014 at

11:11 am

Hi, make sure your archive has these files/folders in the root! “System” folder.

“boot.img” file. “Meta-Inf” folder. Probably you have packed the whole folder which has these contents. Reply gg



 Dec 6, 2014 at 12:57 am

CAN U MAKE TUTORIAL IN VIDEO FORMAT PLZ NEED MORE DETAILS BCOZ I ALREADY TRY MANY TIMES PORT ING ROM BUT STILL FAIL..I FOLLOW ALL STEP BUT STILL NOT WORKING ALWAYS STUCK ON BOOT LOGO Reply Rohan Arya



 Dec 9, 2014 at 9:42

am

Yup, I’m working on it. Will release it today only. Reply Anonymous

  Dec 9, 2014 at 3:37 am

I haveca galaxy n9006 mtk6582 that got bricked I have clockworkmod back up of phone . I found a few stock toms and flashed them the phone turned on but the touch was frozen ,only the power and home button worked and also when I touch the volume up button the volume indicator appears on the screen but doesn’t move up or down. When the phone is booting up u can hear a tic then the boot animation appears . please help !! I have been flashing this phone over 3 weeks now and no success Reply Rohan Arya



 Dec 9, 2014 at 9:41

am

Is it a UBIFs based device? Cloc kWorkMod doesn’t work well with UBIFs. Try wiping data which helped me in the same situation when I had a UBIFs based device. Reply Anonymous



 Dec 9, 2014 at 1:03

pm

Thanks for the reply . but I don’t know what u mean by UBIFs based device . I can not boot into recovery so I don’t know anything about the phone . the only method of flashing is through sp flash tool that works . I made the cm backup before I bricked the phone . I am wondering if there is a way to make a stock ROM from the cmw back up I made . Reply Animesh Qwerty



 Dec 12, 2014 at 12:40 pm

i know this sounds lame but i want to upgrade my lenovo s720(MT6577) to kitkat so i thought to download any rom (eg. slimkat or miui) of i9300 to flash it on my phone but on little searching i found that i9500 rom should be fashed. plsss help Reply Rohan Arya



 Dec 13, 2014 at

1:01 pm

Sorry, but you can’t do that to upgrade your phone.. [-( Reply Gambit Wolf



 Dec 13, 2014 at 4:43 pm

Sir can u mention some Devices name whose ROM should port in Unite 2 KK Reply Rohan Arya



 Dec 15, 2014 at

9:26 am

Coolpad 7295C, Micromax Canvas 2.2 and other MT6582 based device. Reply Binoy Lukose

  Dec 17, 2014 at 7:30 pm

which tool you are using for this,r u using es file explorer Reply Rohan Arya



 Dec 19, 2014 at

2:54 pm

For what? This can be done in any explorer. Linux, Android, Windows, any! Reply Anonymous

  Dec 23, 2014 at 9:43 am

Wnt to port android L rom to my xolo q1010i hlp me Reply Rohan Arya



 Dec 25, 2014 at

10:21 am

Hunt a ROM and port! The tutorial is here only. Reply Anonymous

  Dec 23, 2014 at 10:51 pm

Hi, I have a Spanish device (MT6577) running Jelly Bean 4.1.1 and kernel 3.4.0. Would it be possible to port Cyanogenmod 10.0 to my device? Thanks. Reply Rohan Arya



 Dec 25, 2014 at

10:10 am

Yes, why not. Reply Anonymous

  Dec 26, 2014 at 2:20 pm

Hi my device is ICS 4.0.4 MT6577…can i port J ELLY BEAN 4.1.1?Thanks Reply Rohan Arya



 Dec 27, 2014 at

6:46 am

Probably it will not boot, but it depends on luck! :d Reply Anonymous

  Dec 28, 2014 at 6:53 am

i have xfactor shine 2 X120Q, built mt6589, can i flash with this method? Reply Anonymous

  Dec 29, 2014 at 3:55 pm

Hello Rohan Bro… I am trying to port MMX Unite 2 roms for Canvas fire 2. I tried it. Everything worked except camera. I tried another method from XDA DEVELOPR site.. did not tried your method. Will this method can fix the camera problem if i do it perfectly??? Reply Rohan Arya



 Dec 31, 2014 at

9:07 am

No idea. Maybe you will need to edit INIT files inside boot.img [ramdisk]. But it depends on the ROM, so i am not sure. I always prefer to replace the whole boot.img file. Maybe this tutorial will fix your error. Reply Mark Neil



 Dec 29, 2014 at 9:06 pm

What is the code for the power off in the menu which restart when it clicks Reply Rohan Arya



 Dec 31, 2014 at

9:06 am

What? Please elaborate. Reply Anonymous

  Dec 31, 2014 at 5:28 pm

Will this work for porting MT6582 Kitkat rom to another MT6582 Jellybean device? Or is it just Kitkat to K itkat? Thanks. Reply Rohan Arya



 Jan 1, 2015 at 5:54

am

This is for Jelly Bean actually, but works with KK to KK as well. Reply Anonymous



 Jan 1, 2015 at 9:12

am

Oh. So no way for JB to KK? Reply Salvador Flores



 Jan 2, 2015 at 2:59

am

nope you would have to modify your kernel. Reply Anonymous



 Jan 2, 2015 at

12:18 pm

What If I have Kitkat kernel for MT6582 (Like my device)? Found it on Github.

Reply Salvador Flores



 Jan 2, 2015 at 2:58 am

hello i ported a r om with with exact same spec but it wont boot in my stock rom lib/modules folder is empty and in etc my stock rom doesnt have vold.fstab and vold.fstab.nand Reply Rohan Arya



 Jan 2, 2015 at 5:02

am

Because the ROM is KitKat based I g uess? Sorry, but I have no idea about KitKat. Never put my hands on it. Reply Anonymous

  Jan 4, 2015 at 4:55 am

How can I upgrade from jb to lollipop. Mt6589 Reply Rohan Arya



 Jan 4, 2015 at 7:51

am

No sorry, you can’t. Reply RAJ DEVKAR



 Jan 4, 2015 at 12:06 pm

dude I want to port mtk6572 rom to mtk6582 wil it work?????????????????? Reply Rohan Arya



 Jan 5, 2015 at 4:22

am

It won’t work Raj. [-( Reply Abdur Rahman



 Jan 26, 2015 at

6:54 am

This comment has been removed by the author. Reply neelanchal sahu

  Jan 6, 2015 at 6:35 am

hiiiiii Sir after porting all going well but no sound in my device pl z help me Reply Rohan Arya



 Jan 12, 2015 at

10:28 am

replace all files with “sound” in /system/lib folder! And congratulations for booting your ROM! Reply Anonymous

  Jan 7, 2015 at 1:40 pm

sir ,i want to port cm11 r om to xolo q700s mt6582 …how to port it help me Reply Rohan Arya



 Jan 12, 2015 at

10:29 am

Which Android version does it have? Even if it has 4.4.4, this method will work only if you will port this ROM from Android One phones. Here’s the link of that ROM: http://www.xposedgeek.net/2014/10/CyanogenMod-11-ROM-For-Micromax-CanvasA1.html. Please ask the developer before porting it. Reply AaTronix TECH

  Jan 9, 2015 at 4:09 pm

Hey u r working on video na where is link of ur video nice guide but u must flash that rom which u made in video and show will it works and if not show how to fix errors plzz need tutorial!!!! Reply Rohan Arya



 Jan 12, 2015 at

10:26 am

Sorry, but after some time i felt that there’s no need for a video because this post is written it easy words. Will see further if it’s needed to make a video or not. Reply Anonymous

  Jan 11, 2015 at 10:52 am

sir I port Emui for my device Mtk6582 same Soc. my phone always restart.

Reply Rohan Arya



 Jan 12, 2015 at

10:27 am

Anonymous, please breifly explain it. Did you follow this tutorial? After flashing does the ROM boots or not? b-( Reply Sree



 Jan 12, 2015 at 5:20 pm

hi im using MMX unit2 A106 running on custom r om cleankat 4.4.4, now can i install CM11 on it

Reply Rohan Arya



 Jan 13, 2015 at

10:31 am

No, you can’t! None of the ROM is based on 4.4.4 for Unit 2 yet. [-( Reply Anonymous

  Jan 16, 2015 at 7:41 pm

Hi i am using alcatel 5035d………..currently running on 4.4.1with 3.4.0 kernal and 6577 cpu……….i want to port a 4.2.2 rom…………i found a 4.2.2 custom rom based on miui of a lenovo phone which have a 6577 cpu………………is there any problem in porting 4.1.1 to 4.2.2 ???????? or miui ??????? Reply Anonymous



 Jan 17, 2015 at

8:39 am

currently running 4.1.1 i want 4.2.2 Reply Rohan Arya



 Jan 18, 2015 at

7:38 am

that shall work because I had ported 4.2.2 to 4.1.2 before. Reply Rohan Arya



 Jan 18, 2015 at

7:39 am

Also backward porting is tough (KK to JB) because when I had Micromax Unite 2, I had tried it, but failed. Reply Anonymous

  Jan 17, 2015 at 7:50 pm

in case dailer not work then???? and also phone storge not mount Reply Rohan Arya



 Jan 18, 2015 at

7:37 am

Dialer not working or the network isn’t coming? Also for storage, move VOLD files from /system/etc folder. Reply Anonymous



 Jan 18, 2015 at

9:16 am

only dialer not work Reply Anonymous

  Jan 18, 2015 at 3:47 pm

im change stock dialer bt also not works {incoming call or outgoing call not apper on screen} Reply Rohan Arya



 Jan 19, 2015 at

9:16 am

Well, you will need to play with .SMALI files which will appear after decompiling the application. I suggest you to port the ROM again from another phone. Reply Anonymous



 Jan 19, 2015 at

2:16 pm

can i change dialer dpi ??? then its work??? Reply Rohan Arya



 Jan 20, 2015 at

10:49 am

Maybe, try yourself. Get one Xposed module for this. Reply Dhruv Suthar



 Jan 20, 2015 at 11:45 am

Does this work for porting between android versions? I mean my stock ROM is Android 4.1.2 and port ROM is android 4.4.2 Kernels are also different in both. Reply Rohan Arya



 Jan 21, 2015 at

9:16 am

No. Same OS to same OS only. Reply darkdream



 Jan 20, 2015 at 1:41 pm

This comment has been removed by the author. Reply darkdream



 Jan 20, 2015 at 2:02 pm

sir, i port a rom from mtk6582 to mtk6582..and after flashing with the port rom face some problems. 1 is when i run my camera app its show “can’t connect to camera” ..i install other camera app but showing the same problem and 2nd is no audio output…i cant Hearing any music…if their is some ways to fix it,then plz help me sir.. Reply Rohan Arya



 Jan 21, 2015 at

9:18 am

Replace all “libaudio” files from /system/lib folder. For camera, try moving “permissions.xml” file from /system/etc folder. Reply darkdream



 Jan 21, 2015 at

10:35 am

thnx sir..thnx for quick responds.

..all major problems are now fixed..but Still their is

some little problems..1st while i have charging my phone in power off mode the battery logo is distorted.. and 2nd is when i turn on my phone, the boot logo rotate 180 deg for a seconds and then back normal,i am try to replacing the bootanimation.zip but still the problem… those problem can be fixed?? Reply Rohan Arya



 Jan 22, 2015 at

9:21 am

That is the splash screen which rotates to 180 degree for a second or so. It will be in “/system/etc/bootanimation” folder I guess. You’ll need to replace with another one or with your stock one. And the power off can be fixed easily too. Just decompile framework.apk file in /system/framework folder. There search for those images and replace them with your stock ones. Reply kuttus shino

  Jan 23, 2015 at

Sengupta

6:45 pm

Can I port android one ROM to any mtk 6582 Kk(4.4.2) device Reply Anonymous

  Jan 22, 2015 at 5:48 pm

Hello sir, my swipe konnect 5.0 device has jb, i want to cm11 kitkat update how i can it. Reply Naren Chitrakar



 Jan 24, 2015 at 8:47 am

I cannot seem to move the lib/modules folder there is wlan.ko file but that is empty(0 KB) so when I try to move the folder window says cannot move the file because the folder in not there anymore. Everything else worked fine. How can I fix this? Reply Naren Chitrakar



 Jan 24, 2015 at

9:04 am

I tried to port the ROM anyway but it just stopped at the start. said installation failed and that was it there were no other errors or anything. Before when I tried to flash this ROM,it was stuck on bootloop but it did go to any further this time. Reply Anonymous

  Jan 25, 2015 at 5:52 pm

@rohan arya system ui fc issue??? any slon??

Reply Anonymous

  Jan 25, 2015 at 7:57 pm

Hello sir. I have a clone of Xiaomi Mi3w, with mt6582, 5.0 inch screen with 320Dpi, 2GB RAM. Kernel version is 3.4.0. Android version is 4.3. My phone is freezing somethimes, especialy when taking a call, the screen is not responding, only I can is to turn off by pressing power off button. Can you give me a advice please? Thanks. Reply Alexandru Sîrb



 Jan 26, 2015 at 3:18 am

Hi! I have (almost succesfully) ported Huawei Honor 3x PRO rom to Philips Xenium i908. Both mt6592, 4.4.2 and same specs. Difference is the display inch: huawei 5.5, philips 5.0. I’ve booted! Fixed most bugs: wifi, imei, sims, rotation and a few others. I’m left with camera problem but forget camera. The thing i’m struggling with is with backlight. It is on max and the brightness slider doesn’t to anything. When i wake the device, the display turns on, but no backlight (tested with a flashlight). I can change brightness through terminal or adb, by sending ‘echo “80” > /sys/class/leds/lcd-backlight/brightness’, or ‘echo “80” > /sys/devices/platform/ledsmt65xx/leds/lcd-backlight/brightness’. Or any other value than 80, but 255 kills my eyes. I modified a lot of things in boot.img, moved all stock modules to port rom. What should i do? I really want EMUI 2.3 (not 1.6, 2.0, or 3.0) on my device. It’s been 2 months since i started. I cannot use my device with the ported rom. The stock just doesn’t fit my taste. Please find a solution to my problem. I decided that i will pay to whoever finds a solution. Reply Abdur Rahman



 Jan 26, 2015 at 6:57 am

This comment has been removed by the author. Reply Abdur Rahman



 Jan 26, 2015 at 6:59 am

can’t find vold.fstab on my “walton primo gm mini” android 4.4.2, mtk6582 Reply Rohan Arya



 Jan 28, 2015 at

9:18 am

KitKat doesn’t have vold files in /system/etc, so ignore it and continue! Reply Anonymous

  Jan 26, 2015 at 12:13 pm

Hello sir. I have a clone of Xiaomi Mi3w, with mt6582, 5.0 inch screen with 320Dpi, 2GB RAM. Kernel version is 3.4.0. Android version is 4.3. My phone is freezing somethimes, especialy when taking a call, the screen is not responding, only I can is to turn off by pressing power off button. Can you give me a advice please? Thanks. Reply Rohan Arya



 Jan 28, 2015 at

9:17 am

Enable ART RunTime and uninstall applications that you don’t need. Reply Anonymous

  Jan 28, 2015 at 2:32 am

sir if im mt6571 AND I WANT TO PORT MT6572 IS IT WORK ..? IM A KITKAT AND 6572 IS JELLYBEAN… Reply Rohan Arya



 Jan 31, 2015 at

9:09 am

Nope, it won’t work! Don’t know about MT6571 and MT652, but JB to KK won’t work! Reply Anonymous

  Jan 28, 2015 at 5:58 pm

@rohan can we port mtk 6572 to mtk 6582??? Reply Rohan Arya



 Jan 31, 2015 at

9:10 am

Probably no.

Reply danielle



 Jan 29, 2015 at 5:57 am

Sir I follow all the steps above But Still I’m boot Loop my phone Keep restarting on Boot Animation. By the way I’m porting Vibe Ui mtk6582 for my Phone MTK6582 Any Solution? Reply Rohan Arya



 Jan 31, 2015 at

9:08 am

Vibe UI needs some patching in INIT.RC file. Can you try porting another ROM from any phone and tell if it does boots or not? Reply Akshay Bhanushali



 Jan 29, 2015 at 5:38 pm

Hey sir can u port rom for my Xolo Q700s. Here is the some important files of my stock r om. Can u plz port rom for ke.plz. Thanks in advance… Reply Rohan Arya



 Jan 31, 2015 at

9:07 am

Sorry, but I can’t as I don’t have the device with me. Reply Akshay Bhanushali



 Jan 29, 2015 at 5:39 pm

If u want to contact me my mail ia [email protected] Plz help me Reply Anonymous

  Feb 1, 2015 at 9:28 am

Hello there. Can I use a 4.4.4 rom to port to my phone which is using 4.4.2? Thanks in advance Reply Anonymous

  Feb 6, 2015 at 9:25 am

Bro i m trying to port rom using android kitchen but need to change recovery.fstab in order to to register mtk 6592 device in kitchen By editing recvery.fstab we can get update script in kitchen but what are the specific changes need to be done in order to get update script can u plz help me Device xolo 8x 1100 You can contact [email protected] Reply Rohan Arya



 Feb 23, 2015 at

10:01 am

Android Kitchen isn’t supported for MTK till now. It’s not stable I mean. All MTKs have same updater-script file. Use of any device with same SoC. Reply Anonymous

  Feb 10, 2015 at 7:52 pm

sir i have gionee v4s which has amigo os based on android 4.4.2 ,it has mtk6582 processor and i want to port a miui rom from a device named gfive a800 which too have mtk6582 processor..the only confusion is that the miui rom is based on android 4.4.4 so can i port this miui r om to my gionee v4s..? Reply Rohan Arya



 Feb 12, 2015 at

9:35 am

How can it be 4.4.4? Maybe, because MiUi officially supports it. Port from any other device which has MiUi v5 based on 4.4.2 with MT6582 processor. Reply Anonymous

  Feb 15, 2015 at 7:36 pm

plese help in my stock rom does not have following files in system/etc vold.fstab vold.fstab.nand Reply Rohan Arya



 Feb 23, 2015 at

10:00 am

KitKat ROMs doesn’t have vold files. Everything is inside boot.img. Reply

Suraj Lad

  Feb 19, 2015 at 5:37 am

Can I Port ROM OF XOLO Hive Of Xolo 8×1100 to Redmi Note 3G redmi Note 3G has Android 4.4.2 (miui 6 as Base) ?? Reply Rohan Arya



 Feb 23, 2015 at

9:58 am

Xolo is an Octa-Core based phone with MT6592 processor. If so then yes, you can easily port it. Reply Anonymous

  Feb 19, 2015 at 10:44 am

Hai Rohan.. First i want to use Color OS on my phone, so i look for the rom..My Phone Model is Himax Pure III (also known as Gionee Elife E7 MINI) which is powered by MTK6592..I got custom rom from another phone that use same chipset (Pomp C6S).. So i decide to use it’s rom to port from my Amigo OS Stock ROM..everything goes well when i flash the port ROM that i made..but it just stuck on boot logo ( OPPO logo)..Can you help me with this..?? Reply Joseph Emmanuel Quijano



 Feb 20, 2015 at 3:26 am

good day sir rohan, i ported mt6592 to mt6582, and when i power it on, it should be the logo then the animation(boot.img), but it already stuck in logo, can it be fixed? also can you teach us how to port from mt6592 to mt6582? your response is much appreciared and well-thanked.. Godbless us Reply Rohan Arya



 Feb 23, 2015 at

9:59 am

It stuck at bootanimation or your phone’s logo (splash screen)? Reply Joseph Emmanuel

  Mar 2, 2015 at 7:59

Quijano

am

good day sir rohan, its stuck at phone’s logo, it should proceed to animation but it doesnt happen, can you solve it? thanks for the respone again and Godbless you Reply Anonymous

  Feb 20, 2015 at 12:20 pm

Hai Rohan.. First i want to use Color OS on my phone, so i look for the rom..My Phone Model is Himax Pure III (also known as Gionee Elife E7 MINI) which is powered by MTK6592..I got custom rom from another phone that use same chipset (Pomp C6S).. So i decide to use it’s rom to port from my Amigo OS Stock ROM..everything goes well when i flash the port ROM that i made..but it just stuck on boot logo ( OPPO logo)..Can you help me with this..?? Reply Rohan Arya



 Feb 23, 2015 at

9:57 am

Oops. The Android version is same as of your device? Reply Anonymous



 Feb 23, 2015 at

10:18 pm

Yes..it’s the same (4.2.2).. Reply michael ashefor

  Feb 23, 2015 at 12:09 am

Can I port Kitkat rom for 6572 to Jellybean for 6572? Reply Rohan Arya



 Feb 23, 2015 at

9:56 am

Nope man. Reply Roberto Ramos



 Feb 23, 2015 at 10:24 pm

Hi Rohan , I followed the step by step process and it has worked fine except for one thing , the camera does not work with any rom. My phone is a Gionee Elife S5.5 MT6592 with JB 4.2.2 Use as stock MIUI rom , because I have the original rom. I hope you can help me because it is the only bug I have Reply Rohan Arya



 Feb 24, 2015 at

11:04 am

Did you try copying permissions.xml file in /system/etc/ folder? If not then do try and

report back. Reply Roberto Ramos



 Apr 6, 2015 at 1:42

am

Still I can not solve the problem , I made the last suggestion and nothing. Please help , it’s the only thing fails. Reply Anonymous

  Feb 24, 2015 at 9:53 am

Why when i install the ported ROM on cwm it says “installation aborted? Reply Marwan Ahmed



 Feb 25, 2015 at 5:57 am

thank you so much Reply Anonymous

  Feb 26, 2015 at 7:17 pm

Can I port Android 5.0 lol lipop to KitKat 4.4.4 kernel 3.4.67 ? Reply Gon Zalo

  Feb 27, 2015 at 10:54 pm

hi sir. Does this guide works with mtk6571? Reply Rohan Arya



 Mar 2, 2015 at 6:09

pm

Why not, Gon. Reply Anonymous

  Feb 28, 2015 at 6:36 am

Hi Rohan Good day and no words of appreciation will be enough to thank your efforts. I’ve a no name phone N9800 chinese copy with mtk6592, can I pick up the cynagenmod 12 and customize it for my phone ? Regards Reply Rohan Arya



 Feb 28, 2015 at

11:31 am

Thanks for your appreciations, but unfortunately, no. Reply Joynal Mask



 Feb 28, 2015 at 6:41 pm

This comment has been removed by the author. Reply Ashu Tiwari



 Mar 2, 2015 at 6:44 pm

i hv xolo play 8×1100 4.4.2 and want to port xolo hive 4.4.2 for my phone what i should do now???????????where i can find base and port rom bro Reply Rohan Arya



 Apr 6, 2015 at 4:50

pm

Moulnisky.com !ight help you. Yep you can port Hive ui! Reply Harry Ron



 Mar 2, 2015 at 10:37 pm

hie! i have micromax canvas tab p650 mtk6589, 1gb ram jb 4.2.1 i want to port cm11 for my tab. is the cm installer works for my tab. there is no stock rom available online for my tab so i have backed up my rom using sp tool. and installed cwm auto generated recovery for my tab using sp tool. my kernal version shows 3.4.5. now what should i do to port cm11 for my d evice please please help!!!! Reply Rohan Arya



 Apr 6, 2015 at 4:49

pm

If CM installer shows a ROM for your device then why afraid! Reply Anonymous

  Mar 3, 2015 at 11:11 am

how to fix android.phone has stopped

Hey @rohan Reply Rohan Arya



 Apr 6, 2015 at 4:48

pm

Port the rom from difference device or edit phone.apk file. Reply Anonymous

  Mar 3, 2015 at 1:38 pm

Bro any additional things required to port a mt6572 rom to mt6572 ubifs device……. I tried a rom it flashed but doesnt boot up not even reached to boot animation…. …. Reply Rohan Arya



 Apr 6, 2015 at 4:48

pm

I gave up while porting ROM to UBIFS. No idea for this. Reply Oliver Agbuya



 Mar 6, 2015 at 6:06 am

after this process do i have to compress it again before flashing? Reply Rohan Arya



 Apr 6, 2015 at 4:47

pm

Yes you will need to do so before flashing the ROM. Reply Shamsul Arefin Sajib

  Mar 6, 2015 at 5:41 pm

sir i ported emui 2.3 from same 6582 soc, but it is in bootloop boot ani,mation finishes and starts again Reply Anonymous



 Mar 14, 2015 at

2:31 pm

Sir You can’t always port any Same Chipset to chipset because of the android version of the phone if you portMTK6577 with jellybean to MTK6577 with ICS version your finished product will be Bootloop .. try to port a r om with the same android version .. and it will RUN as what you expect .. Reply Rohan Arya



 Apr 6, 2015 at 4:46

pm

The fix is probably in INIT.RC file in /boot.img/ramdisk.. Patch it! Reply Meruzhan Cubot



 Mar 17, 2015 at 11:00 pm

Can I port 4.4 for my cubot s308? Because official kitkat firmware cant upgrade 4.2 to 4.4. It breaks phone. I want to make normal amd working 4.4 firmware for 4’2 versions Reply Rohan Arya



 Mar 18, 2015 at

10:40 am

Dude 4.4 to 4.2 isn’t possible. Reply Stefano Ciarrocchi

  Mar 20, 2015 at 4:11 pm

Hi I have Star Q880 mtk6589…. I have 4.2.2 rom…Someone could ports to kitkat? A NeedRom user did a custom rom for me: https://drive.google….it?usp=sharing I had 4.2.1 and he adapted a STAR Q9000 rom fo STAR Q880 (4.2.2). Phone Details: Hardware : MT6589 Model : Q880 Build number : BubSystem Build date UTC : 20130516-124946 Android v : 4.2.2 Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P1, 2013/02/27 15:00 Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Mon May 13 14:55:29 CST 2013 Stefano

Reply Rohan Arya



 Apr 6, 2015 at 4:45

pm

No one will help you in this case Stefano. Rather follow this easy tutorial. Reply Anonymous

  Mar 28, 2015 at 2:52 am

Thanks for this tutorial buddy. Really helped me a lot. Reply Rohan Arya



 Mar 30, 2015 at

6:58 am

Stay tuned! Reply Ashish Ghadigaonkar

  Mar 30, 2015 at 5:59 am

How can I support 3G in my phone. Micrmax Bolt A068 Reply Rohan Arya



 Mar 30, 2015 at

6:58 am

You can’t if your phone doesn’t support 3G. Reply Anonymous

  Mar 30, 2015 at 4:52 pm

Sir i ported a r om from mtk6572 to mtk6572 But it stuck on boot logo. The rom is kk based. Please help Reply Rohan Arya



 Mar 31, 2015 at

5:53 am

Sorry, but is the ROM KK based or your device? Elaborate please. Reply Anonymous



 Mar 31, 2015 at

6:55 am

Both the rom is 4.4.2 based and also my device is 4.4.2 Reply Rohan Arya



 Mar 31, 2015 at

10:36 am

I guess one device is UBIFS based and another one is EXT4 based. You will need to do much work in boot.img and also in /system/bin (replacing files), so hunt a device with EXT4/UBIFS partition (the one you have). Reply Anonymous



 Apr 1, 2015 at 4:37

pm

Is there any way to check whether rom is for ubifs/ext4 device Reply Rohan Arya



 Apr 6, 2015 at 4:43

pm

Yes. Check build.prop (/system) or in INIT.RC file (Boot.img/ramdisk). Reply Stefano Ciarrocchi

  Mar 31, 2015 at

10:40 am

Someone could help me for porting kitkat to my Star Q880 mtk6589 ? I have “MTK FirmwareAdapter Tool” but I don’t wanna brick my phone! Reply Rohan Arya



 Apr 6, 2015 at 4:42

pm

That tool never worked for me. Follow this tutorial only. Any problems? Reply neelanchal sahu

  Mar 31, 2015 at 12:57 pm

hiiiiii Sir after porting all going well but network is very poor some time its gone plz help me Reply Rohan Arya



 Apr 6, 2015 at 4:41

pm

Oops., but network has nothing to do with it. I don’t think network range can be adjusted. Are the SIMs working? Reply

Anonymous

  Apr 1, 2015 at 4:51 pm

Sir ported on rom but it has 1 problem. Whenever i open playstore The mobile automatically reboots Reply Rohan Arya



 Apr 6, 2015 at 4:40

pm

Download ‘GAPPS’ for your Android version and install through r ecovery. Reply Mukliszero

  Apr 3, 2015 at 12:35 am

whether , this method can be used for porting MIUI rom china ? Reply Rohan Arya



 Apr 6, 2015 at 4:39

pm

Yes this will work to port MIUI ROM. I have tried it! Reply Shamsher Ali



 Apr 4, 2015 at 5:17 pm

after porting rom when try to install through twrp it shows md5 file not found Reply Rohan Arya



 Apr 6, 2015 at 4:39

pm

What! Are you restoring at MD5? try ENABLING “DISABLE MD5 CHECKSUM” option in recovery. Reply Thế Lưu Đậu



 Apr 6, 2015 at 2:23 am

Please help me, my phone is masstel stat 500 kitkat 4.4.2 mtk6582, i have ported complete rom color os 2.0.1i kitkat from oppo find 5 mini r827. I fixed all bug in rom. But whem i turned off my phone, phone can’t power off it appear black screen and not vibrate, phone don’t turn off. Please help me fix this. Sorry my english is bad Reply Rohan Arya



 Apr 6, 2015 at 4:36

pm

This comment has been removed by the author. Reply Rohan Arya



 Apr 6, 2015 at 6:19 am

@The Luru, did you replace /firmware folder while porting? Reply Thế Lưu Đậu



 Apr 6, 2015 at 1:31

pm

This comment has been removed by the author. Reply Thế Lưu Đậu



 Apr 6, 2015 at 1:37

pm

Yes, i have replaced firmware folder when porting. You can help me fix this. Thankyou Rohan Arya Reply Rohan Arya



 Apr 6, 2015 at 4:36

pm

I will not guide you wrong, but TBH i don’t know about this bug. Try porting this ROM from ANOTHER device (non OPPO) because OPPO ROMs are OEM based and are kernel dependent so you will need to patch the kernel.. Easier way would be to port this rom from another phone (again, NON OPPO). Reply Anonymous

  Apr 7, 2015 at 1:29 pm

hi. i try to port micromax a110 rom to my|phone a898 duo with the same spec but my|phone has a tv-out. i’ve got a bootloop after a try of flashing this rom. tell me what is the problem. Reply Rohan Arya



 Apr 8, 2015 at 4:49

am

Which ROM? TV-Out doesn’t matter out here. Reply

Anonymous



 Apr 8, 2015 at 8:56

am

the rom is from micromax 4.4.2 based rom and i saw it from xda-developers. it is both mt6577 so i want it to port to my|phone a898 duo which is 4.0.1 based rom is installed. i copied system, framework, vendor and some lib files and rework system.prop before flashing via cwm but i’ve got a bootloop. Reply Rohan Arya



 Apr 10, 2015 at

12:07 pm

what? you copied “system” folder? Kindly follow the whole tutorial. You missed replacing boot.img and many other things. Reply Anonymous

  Apr 7, 2015 at 1:48 pm

Hello, I have got a device called Lenovo IdeaTab S6000-H (Vodafone Smart Tab 3 10 ″). Its on 4.2.2 which is horrible, i would like to get a 4.4 one if possible. I would pay if you guys could help me! You guys are my only hope, this android version is full of bug s, the battery page shows code not %, aosp browser crash always, and so on. Reply Rohan Arya



 Apr 8, 2015 at 4:47

am

Sorry, but I don’t take money for this. It would be good if you port an AOSP ROM from another tablet with same resolution and processor. For KitKat, it’s not easy until you have kernel source (which I guess Lenovo has r eleased for IdeaTab S600-H).. Try Xposed Framework with KitKat (or even Lollipop) ttheme and enable some KK features through it’s modules. Reply adisti setya



 Apr 8, 2015 at 12:07 am

Hai. Thanks for your tuts. I’m wondering why do I always fail on flashing. But I’m sure that I did exactly like what you wrote. I’ll be grateful if you would tell me how to flash correctly, or what should I do before flash. Do i need to wipe first, or factory reset? Thanks a lot. Reply Rohan Arya



 Apr 8, 2015 at 4:44

am

yep, you need to wipe before flashing. Failed? How? Did you get any error while flashing? Reply RATNESH KUMAR



 Apr 8, 2015 at 2:09 am

This comment has been removed by the author. Reply RATNESH KUMAR



 Apr 8, 2015 at 2:11 am

Hey I ported cm11 successfully for my mt6582 4.4.2 kk(MMX A104)..but 2nd sim not working and as I charge it on power off mode it shows logo only…how to fix…?please… Reply Rohan Arya



 Apr 10, 2015 at

12:08 pm

Does the ROM supports second SIM? It doesn’t shut down or it doesn’t boot up and shows only logo? Reply Wasif



 Apr 22,

2015 at 11:56 am

Can you please video which shows step of porting ? Reply



Rohan



Arya

Apr 22, 2015 at 1:24 pm

Sorry, but these days i am not free.

Reply Aris Candra Gumilar



 Apr 11, 2015 at 10:03 am

Hello, Rohan. I’m trying to port VibeUI rom to my device (same chipset). All things work, except brightness and problem with turn on screen after locked. Brightness stuck at maximum level and screen won’t turn on after locked. Can you help me? Thanks… Sorry for my English. Reply Rohan Arya



 Apr 11, 2015 at

12:11 pm

Try setting brightness both from Settings application and notification bar.. Search about “disable deep sleep android” on Google and you will get the solu tion for phone not turning on after locking. Reply Techie Saarthak

  Apr 19, 2015 at 2:06 am

hi, i have tried to port miui 5 and color os 2.1 of mt6589 of micromax canvas plus(i guess) but it stuck on bootloop then restarts. i have tried your method (FAILED) Another method which is on xda and shows lots more files to port (FAILED). By porting with your method the device never reached to boot screen. screen goes blank and then reboots. by xda method i reached at bootloop and then reboots. my device has same SoC as the given device and same android too (4.2.1) Still no success! and btw i want to add an image in my settings.apk’s about device menu how can i do that? Please help me! thnx in advance. and can we chat on fb cu z this is the best medium for me to communicate. her’s my profile http://facebook.com/techieharryron Reply RTyagi



 Apr 21, 2015 at 7:51 pm

Hi…I want to upgrade from Belly Bean 4.2 to to lollipop. chipset is Mt6589. Is that possible? if not what is the reason. and it not to Lollipop then is upgrade possible to Cyanogen 10.10?? Please Give the steps and source files. Thanks, RTyagi Reply christian



 Apr 21, 2015 at 9:35 pm

I am successful porting another rom but the boot animation and display was inverted help me please. Reply Rohan Arya 



 Apr 22, 2015 at

1:29 pm

Search for “ro.sf.hwrotation=” line. If the value is “180”, then make it “90” or vice versa. If no such line is there, then simply add this line without quotes in /system/build.prop file: ro.sf.hwrotation=180 Reply Wasif

  Apr 22, 2015 at 2:07 pm

DOoge release andriod lolipop for MTK 6582 can i port this to my cubot s308 4.2.2 MTK 6582 ? Reply Jeff



 May 16, 2015 at

8:27 pm

Wondering same thing except for a thl4000, is also a 6582 Reply Rohan Arya 



 May 16,

2015 at 9:44 pm

Yes, it should work like a butter! Reply Yahya Wessam



 Apr 23, 2015 at 10:12 pm

Hi I did all of your what you said to port the ROM that I want for my device and its working fine but one problem that the speaker and the mic are not working,CAN YOU PLS HELP ME Reply

Rohan Arya 



 Apr 24, 2015 at

1:18 pm

fix is probably in FIRMWARE folder. Reply Ravs



 Apr 25, 2015 at 6:34 pm

hi, thanks for the tutorial.Very much appreciated. I was successful in porting an MT6592 rom to my MT6592 device. The only problem is that my cor rect ram size is not showing. It should show as 2GB total as was showing on original rom but after porting its showing as 958mb only. Can you please help me correct this. Reply Rohan Arya 



 Apr 26, 2015 at

11:52 am

Ignore that and get any tool for the same (hardware testing). If 2 GB RAM appears there then you are lucky and if not, hunt a device with 2 GB RAM and on same SOC. Reply nimesha

  Apr 26, 2015 at 8:29 pm

Hello friend, is there a way to port rom from different chipset? Like mtk 6592 to mtk6589. Thanks Reply Dreamerhew



 Apr 29, 2015 at 5:05 pm

Sir, can I port my lenovo A850+ mtk6592 android 4.2 to android 4.4? Or it doesn’t have kernal for it? Reply Rohan Arya 



 Apr 29, 2015 at

7:48 pm

No Dreamhew :3 You cannot port JB to KK unless you have good knowledge for kernel. Reply Hazem

  Apr 30, 2015 at 1:23 pm

I have innjoo i2 and I fun know how to flash any ROM with out a scatter file Reply Rohan Arya 



 Apr 30, 2015 at

1:45 pm

Hi, please be clear. I am not getting you, sorry. Reply Nimesha

  May 2, 2015 at 8:24 pm

Hello, good day, i g ot mtk 6589 running miui 4.8 (thanks to your guide). but i saw there is a 4.4.4 in xda for wiko stairway (also a mtk 6589 device), I’m asking is if i flashed it without any kernal development will it work? thanks Reply RATNESH KUMAR



 May 4, 2015 at 9:35 am

I PORTED HDC ROM FOR MT6582..ITS S5 AND S6 DUAL SIM..BUT BOTH PORT GIVES SYSTEM UI FC AS ITS BOOT..HOW TO FIX? Reply Rohan Arya



 May 4, 2015 at 1:48

pm



Change the device from which you ported. Reply Vernon

  May 10, 2015 at 10:16 pm

Hello..this is a great tutorial. but when i try miui v6 [5.5.1]. its stuck in bootloop, and when i edit init.rc it gets stuck in logo screen. i have tried so many ways but i cant get this miui 6 rom to boot… but miui 6 [v5.1.2 beta] boots fine.pls i need help porting this Miui 6 rom..(i am porting from wiko rainbow mtk6582 to innjoo note mtk6582).. I need your expertise please Reply Vernon

  May 10, 2015 at 10:38 pm

Hello, this is great work..i tried porting Miui 6 to mtk 6582 but it gets stuck in bootloop. when i edit the kernel(init.rc.) it gets stuck in boot logo, i need help porting this rom..am porting from wiki rainbow with custom Miui6(v5.5.1) to innjoo note kitkat stock rom(4.4.2) Reply Hendrix



 May 11, 2015 at 8:41 pm

I done everything as you said but it give me an error installation aborted Reply Rohan Arya



 May 12, 2015 at



5:30 pm

Which error? comment down the error number or full error line. Reply Seage



 May 12, 2015 at 8:39 pm

Hello Mr. Rohan i tried this porting method for mt6582 to mt6582 but it’s forever stuck at bootanimation and i can’t understand logcat. Help please Reply Rohan Arya 



 May 12, 2015 at

8:45 pm

Geage try porting it from another device if you are not an advanced user.

This is what I

did when I was a newbie (still I do the same xD) Reply Seage



 May 12,

2015 at 8:54 pm

What do you mean port it from another device? Reply Vernon

  May 12, 2015 at 8:59 pm

Hello Mr Rohan. I tried por ting this rom to an mtk6582. It gets stuck at boot screen. When I edit kernel it gets stuck at logo screen.. I have tried to port from other device. I need ur help and advice.. Thanks Reply Vernon

  May 12, 2015 at 9:00 pm

Hello Mr Rohan. I tried por ting this rom to an mtk6582. It gets stuck in bootloop.. I have tried to port from other device. I need ur help and advice.. Thanks Reply Seage



 May 12, 2015 at 9:23 pm

Sir Rohan, what do you mean port it from another device? Reply Rohan Arya 



 May 13, 2015 at

2:51 pm

I mean that port this ROM from any other Android phone running same SoC. Reply Seage



 May 13,

2015 at 5:14 pm

you mean port this to another device before por ting it to mine? Reply rahul patidar gami



 May 14, 2015 at 1:47 pm

i dont have meta inf what i do.for this. Reply Rohan Arya 



 May 14, 2015 at

2:10 pm

It’s not possible. META INF is always present where the /system folder is present. Reply Sandy Amoo



 May 15, 2015 at 6:03 pm

Please HELP need info to root this device: Manufacturer : alps Model : 630i Hardware : mt6572 Board : a3se_af_licheng_st06_gr Bootloader : unknown Device : a3se_af_licheng_st06_gr Brand : alps Android Version : 4.4.2 (KitKat) API Level : 19 Build Version : a3se_af_licheng_st06_gr_v01_20-12-2014 Android ID : -ADMIN EDIT: REMOVED Kernel Info : Linux version 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Sat Dec 20 11:24:24 CST 2014 Thanks very much in advance:-) Reply

Rohan Arya 



 May 15, 2015 at

7:09 pm

You have to follow ReadBack and Root Method to root your device. Reply aly zacry



 May 16, 2015 at 9:03 am

thank for good guide, how ever i still got 2 problem went using this guide. First i fail to get back my soft key button ( lenovo A880 ) and second my phone wont dispaly my internal sd card in correct amount thank in advance Reply Rohan Arya



 May 16, 2015 at

11:01 am



Don’t mind that incorrect SD Card space. For soft keys, the fix is in /firmware folder (in System folder). Reply MAK



 May 16, 2015 at 11:37 pm

Hi, my stock ROM is JB 4.2.1 and the ROM I want to port is JB 4.2.2. For the boot.img, I know that I have to do kernel porting. But for all the rest (lib, hw, etc…) ca, I use my stock ROM files or do I necessarily need an exact 4.2.2 ROM to do the porting ? Reply Rohan Arya



 May 17, 2015 at

2:04 pm



4.2.2 can be easily ported to 4.2.1 device with some init.rc file changes (in boot.img).. No need or anything else. Reply aly zacry



 May 17, 2015 at 11:02 am

Hai there thank for replay, do you mean system/etc/firmware? Or there is a code for it still don’t understand Master Rohan Reply Rohan Arya



 May 17, 2015 at

2:03 pm



Exactly. /System/etc/firmware and Vendor folder. Reply aly zacry



 May 17, 2015 at 2:21 pm

Thank will try for it.. Reply lanre



 May 19, 2015 at 10:12 am

my phone has been freezing and restarting after porting. and i notice wen i draw the notification panel it say system ui has stopped help Reply Emmanuel

  May 21, 2015 at

11:17 am

Please is there any way i can fix blu etooth not recieving in a rom i por ted to my device? BTW i love your post. Reply Rohan Arya



 May 21, 2015 at

11:26 am



Yes, /system/etc/firmware is for this. Thanks! Reply Emmanuel

  May 21, 2015 at 12:14 pm

Thanks for your help and the superfast response. Reply Vaisakh Murali



 May 22, 2015 at 1:56 pm

dude… I’m using Karbonn A92 which is based of mt6572 with ubifs system…. i have ported the rom but I’m not a able to install a custom recovery…. I also have increased the partition size for recovery on my phone… I had installed Carliv Touch Recovery but whenever I boot into recovery my screen goes black and i have to restart my phone…. my phone runs on jb 4.2.2… please help! Reply thamjeed



 May 23, 2015 at 11:36 am

Hi, Is it possible to port a Lollipop 5.1.1 rom from ‘Android One’ d evice’s update of Micromax Canvas A1 (mt6582/4.5 ″ screen/4gb internal) to Lenovo S930 which is 4.4.2 kitkat

(mt6582/6″/8gb). Since they both have the same mtk chipset, can it be ported? Reply Rohan Arya 



 May 23, 2015 at

11:45 am

No, it is not possible because Google has modified MTK’s SoC and also you will need to have a custom kernel for the same! Reply andro boy

  May 25, 2015 at 1:36 pm

sir can i upgrade my mt6575 gingerbread device to ics or something like that coz im frustrated with some app requirements of android 4.0+ Reply Rohan Arya 



 May 26, 2015 at

12:04 pm

No Andro Boy that is way too tough! :/ Reply Sammani



 May 27, 2015 at 5:30 pm

I have ZTE Blade G2 with Jellybean 4.2.1 stock 512 mb ram & 4 gb rom. kernel 3.4.5 MTK 6589 4.5 inch IPS Can you please suggest portable roms for my device? Reply Rohan Arya



 May 28, 2015 at

2:08 pm



Suggest? Just port it from any device with MT6589 on the board. Anyway: Micromax A116 Canvas HD Spice Mi 515 Reply SAMMANI



 Jun 24,

2015 at 11:59 am

i followed your great gu ide in letter and spirit. I was successful in booting only a couple of roms. Note-3 for spice-535 and experia z2. Most of the roms are stuck at boot logo. Most of them are of same sdk version etc. Where I am faltering? Reply



Rohan



Arya

Jun 24, 2015 at 12:41 pm

Which were the other ROMs? Reply Chirag Vidhani



 May 31, 2015 at 1:49 am

Hey sie … My idea is to port mmx android one’s official cyanogen 11 to u nite 2 both have similar specs … What about it … Can i port that rom? Reply Rohan Arya 



 May 31, 2015 at

1:09 pm

Probably it will not work. Do give it a shot! Reply Mattek



 Jun 3, 2015 at 12:36 pm

Does this work for any ROM? Reply Somesh



 Jun 4, 2015 at 3:54 pm

Sir, could u help me to find a rom for my tablet colors XT711(MT6577) i tried to port xperia iris V2 (MT6577) shows (STATUS 0) installation aborted.. m stuck on bootloop n my cwm shows E:cant mount /cache/recovery/command Reply Raymark



 Jun 5, 2015 at 3:23 pm

I already ported and successfully booted up the rom my bug is sd card not mounted, and power and volume buttons isnt working too sorry for my bad english tia sir Reply Rohan Arya



 Jun 5, 2015 at 3:58

pm



Please replace ‘vold’ files from /system/etc/ and also the /vendor folder in system! Reply Raymark



 Jun 5,

2015 at 4:34 pm

i`ve already fix the storage mountings sir, the only problem as of now is the hardware buttons volume, power will try as you said soon i`ll feedback :] Reply Raymark



Jun 5, 2015 at 5:05 pm

still no work sir i`ve already tried what you said already replaced the vold and vendors still no luck :c any recommendation`s ? Reply



Rohan



Arya

Jun 7, 2015 at 1:49 pm

Sorry, then we cannot help you Raymark.



Rohan



Arya

Jun 5, 2015 at 6:21 pm

Try replacing /system/etc/firmware.. Reply Raymark



 Jun 5, 2015 at 3:23 pm

Hope you can help me with this bug @@ Reply  jatin baranwal



 Jun 6, 2015 at 9:44 am

Hey bro plzzz suggest me some rom which i have to port for my unite 2. And plzzz tell me how to extract system.img in stock rlm folder. Plzz tell me Reply Rohan Arya



 Jun 7, 2015 at 1:46

pm



Maybe from Coolpad 7295C or Micromax Canvas 2.2 Reply Dragos



 Jun 7, 2015 at 4:51 pm

hi thanks a lot man it works. i port an s5 rom for my mtk 6592 gionee elife s5.5 but the camera dont work and after i reboot the phone the touch dont work until i go to recent apps. so please if you can help me…. Reply Rohan Arya 



 Jun 7, 2015 at 7:28

pm

Please change the device from which you are porting the ROM for ease. These problems are not common and are device based so I can’t help you in. Sorry. Reply Ben



 Jun 7, 2015 at 8:47 pm

Hi Rohan Thanks for this update. I got almost everything working except camera, still getting “can’t connect to the camera” I have checked couple of my device roms but can’t find “permission..xml” in

system/etc/permission/ I really love the samsung S5 am porting to. So any clue on how to get camera working?? Reply Rohan Arya

 Jun 8, 2015 at 1:13



pm



Sorry, I can’t help you. Try any 3rd party camer application. Reply asif

  Jun 8, 2015 at 11:44 pm

Sir I ported as u instracted ,everything works except vibration….. Vibration length is very short….stock rom doesnt have this problem…pls tell me how to fix it….my device is MTK6582 Reply Karen



 Jun 11, 2015 at 1:45 am

How about mt 6571 kitkat. Would u mind to give me a tutorial on how to upgrade to lollipop or maybe at least to fix bugs on my phone. My battery drain fast, error message the ‘unfortunately…… Keep on popping out, hardly can install application opr games Reply Rohan Arya 

 Jun 11, 2015 at



11:25 am

You cannot upgrade easily from KK to LP. ._. For battery, I guess it’s a fault in your battery. Try another custom ROM from another device (KK only).. Reply androtech



 Aug 9,

2015 at 8:10 pm

Hey Man I ported from 4.4.2 to Lollipop 5.1.1 on Karbonn titanium s2 in 3 days there are few bugs but works like charm(i’m studying in 10th) Reply tambunanroni



 Jun 11, 2015 at 11:04 pm

Sir,, can u help me pl is.. I have Samsung galaxy note 3 SM-N9006 with build version SM-N9005CUBMI3 I’ve tried to find custom ROM for my device but I got notting compatible.. Can u help me to port 1 for me plus..? I’ll be so thankfully.. Reply Rohan Arya 



 Jun 12, 2015 at

10:04 am

Sorry, I have completely no knowledge about Samsung phones (that big build version) & so I won’t guide you wrong. Also, this tutorial is for MediaTek devices and won’t work on other SoCs like SnapDragon. Reply Bidyadhar Mohanty



 Jun 13, 2015 at 4:53 pm

Bro can u pls give me the replacement set for lollipop 64 bit roms for mt6752 64 bit processor …..there is another folder called lib64….. thanxx in advance.. Reply Rohan Arya 



 Jun 14, 2015 at

10:00 pm

I haven’t tried porting from 64 bit OS so can’t say. Most probably, this will work, but you will need to port only from 64 bit device with a bit changes.. Reply faizal



 Jun 13, 2015 at 8:20 pm

can i port chinese rom (CN) to ROW rom? Reply Bidyadhar Mohanty



 Jun 13, 2015 at

11:54 pm

yes bro of course….see http://forum.xda-developers.com/chef-central/android/portingmtk6752-devices-a7000-vibe-2-5-t3123417 Reply Rohan Arya 



 Jun 14, 2015 at

9:59 pm

Sure, language doesn’t matter.

Reply Tariq

  Jun 16, 2015 at 4:35 am

Hi, I have Mi4 Clone which have MIUI V5 (4.2.2 Fake Kitkat), I need to know if it can be ported to MIUI V6 (Original Kitkat), if u c an do it then I can pr ovide u data of my mobile whatever you need, or u can help me to tell me what should I do ? I will be very Thankfull to you, I am giving full details of my phone below. Thanks ———————————————————Hardware : Qualcomm (Fake) its MT6582 Model : MI 4W Build number : KVT49L Build date UTC : 20140808-051448 Android v : 4.4.2 (Fake) its JellyBean Baseband v: MOLY.WR8.W1315.MD.WG.MP.V19, 2013/12/19 09:55 Kernel v : 3.4.0 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) 3.4.5 Uboot build v : —– LCD Driver IC : 1-nt35592_hd720_dsi_vdo_lcm_drv ———————————————————My Mobile is rooted and CWM recovery installed, I have full backup via CWM and also via MTKDROID tools. I want full Kitkat support because I need to run one app and its requirement is Kitkat. Thanks a lot. Reply Rohan Arya 



 Jun 16, 2015 at

10:12 am

Nope Tariq, it’s not an easy task because it might require some kernel work which can be done only after kernel source. Reply Tariq



 Jun 17,

2015 at 3:39 am

Thank You So Much Rohan for Reply, ok one thing I want to know, if Kitkat apps can be ported to Jellybean 4.2 ? lol because I just want to run one app which require at least minimum 4.4 and its MI FIT Band app ?? Thanks a lot. Reply



Rohan



Arya

Jun 17, 2015 at 9:51 am

Sorry Tariq, you cannot do this because those applications require newer APIs which are in KK not JB. Reply Tigran



 Aug 4, 2015 at 3:04

am

please can you send me a backup of your phone mi4 my email – [email protected] Reply castro_de



 Jun 16, 2015 at 7:27 am

I have I stock ROM of my R827, but I don’t know what is a ROM to port? what is it? Reply Rohan Arya



 Jun 16, 2015 at

10:11 am



Just like there are many editions of Windows (Windows 7 Black Edition, Gaming Edition) with extra features, Custom ROMs are too same with extra features, but based on the same Android OS. Reply castro_de



 Jun 16, 2015 at 8:35 am

i’m a newbie Reply bhavesh



 Jun 16, 2015 at 10:42 pm

hello, i have mmx juice a177. i have installed miui v5 custom rom, i l ike it to much… i have seen a battery icon, clock col our n style change feature in another samsung ace mobile, if i

want that feature in my mobile, is it possible to g et it in my mobile ??? i dont want to install any application on my mobile 4 it. can i g et this option in my miui custom-current rom setting ? can i modify rom in that way ??? if yes, how ? please help ….. Reply Rohan Arya





 Jun 17, 2015 at

9:52 am

Try MiUi Themes..

Maybe you might like one of them.

Reply shreehari

 Jun 17, 2015 at 10:41 am



My phone is MT6572 but I’m trying to install ROM of MT6582 how can I port it (that is lollipop based ROM my phone is jb is) Reply ansari



 Jun 17, 2015 at 11:40 pm

can u plz let me know which mobiles custom roms can be ported for lenovo a526 plzz Reply Rohan Arya





 Jun 18, 2015 at

9:50 am

Hi, Micromax Unite 2, Micromax Canvas 2.2 are the devices. Obviously many more are, but you can definitely get your favorite ROM from these devices. Reply shreehari

 Jun 19, 2015 at 3:27 pm



My phone is MT6572 but I’m trying to install ROM of MT6582 how can I port it (that is lollipop based ROM my phone is jelly bean) Reply shreehari

 Jun 19, 2015 at 3:30 pm



Because there is no lollipop based ROM for MT6572. Reply Ishu Mehta



 Jun 21, 2015 at 7:24 pm

Sir,I have canvas nitro A-310 which has mtk6592 cpu ,can you suggest how can I and which device’s rom should I port so that I can install cyanogenmod 12 for it Thanks. Yours sincerely, Ishu Mehta, Reply Ishu Mehta



 Jun 21, 2015 at

8:10 pm

Sir,I have canvas nitro A-310 which has mtk6592 cpu ,can you suggest how can I and which device’s rom should I port so that I can install cyanogenmod 12 for it.I am badly in need for cyanogenmod 12 ,please provide a way Thanks. Yours sincerely, Ishu Mehta, Reply Rohan Arya 



 Jun 22,

2015 at 10:25 am

There you go: http://www.mtkroms com/p/custom-roms-for-mtk6592.html You cannot install CyanogenMod 12 on Micromax Canvas Nitro or Lollipop ROM.

Reply priyanshu

  Jun 22, 2015 at 9:08 pm

i ported cm 11 for my device but is show max pix size only 8mp instead of 16 mp Reply Anant sachdeva



 Jun 29, 2015 at 11:50 am

Hello rohan My device is zte v967s and i am using custom rom oppo all functions all working but 3g switch not on and not off. My device is working only 3g not 2g please help Reply urmish



 Jul 11, 2015 at 7:22 pm

hi i ported cm 12.1 booted up but sim card not working. i have mt6592 chipset phone.

Reply Rabani Baloch



 Jul 12, 2015 at 2:04 pm

I have 2 mtk6582 Devices.Both have same SOCs but screen resolution are not same.Can i port rom ? Reply Yogesh Purohit



 Jul 13, 2015 at 3:28 pm

Hi Sir, I have a Intex Aqua I5 HD device (MT6582) running Jelly Bean 4.2.2 and kernel 3.4.5. I need Cyanogenmod to my device Pls any help Thanks. Reply Riadh Taihi



 Jul 19, 2015 at 1:53 pm

Thanks for the great tutorial bro! One question though: I have a Cubot S200 which has an MTK6582, 1Gb Ram,8Gb Rom and wanted to port the Doogee Titans 2 which has relatevly the same specs and has Android 5.0. So with your Tutorial can we port a 5.0 using my 4.4.2 Stock Cubot Rom? Thanks. Reply Rayjohn



 Jul 21, 2015 at 11:29 pm

Hi sir, thanks for this very informative blog. Haven’t tried it though. My device is MTK6577 running on a custom Galaxy S5 based ROM kitkat. I have everything backed up, I just have few questions. 1. Will I be able to port any KitKat based rom to my device using only this tutorial or will I need the Android Kitchen for this (for tweaks and edits) 2. I also have my stock ROM handy but I can’t find the pq file in System/bin. But the vola file is there I’m stuck on that part. Is it ok to skip that part, then I’ll just replace the vola file? Cheers, Reply saif

  Jul 23, 2015 at 11:51 pm

Kya bhai aap merit much help kr skte hai….plzzzz aap apna contact nmbr mujhe dona….plzzzz Reply oh yeah!!!!



 Jul 24, 2015 at 6:26 am

sir why is that after installing or flashing custom rom ther is no sound coming out tru the speaker i tried all custom rom still dessame..any suggest pls.. Reply Shaavez Khan



 Jul 31, 2015 at 1:19 pm

Hello Sir, I am having a Micromax Canvas JUICE A177…. Is it possible to port a Micromax Canvas DOODLE 3 KitKat Version to it ? Thanks for regarding my request.. Reply vicopem



 Aug 2, 2015 at 12:24 am

sir rohan, can I port from a mtk6582 jellybean rom to a mtk6582 kitkat rom with these procedures?… Reply deba

  Aug 6, 2015 at 8:34 pm

Plz help me-sir plz Can u create a custom rom for Micromax a72 …plz .. I can search a lot on web ..but I could not find it so plz help me.. Reply saif

  Aug 8, 2015 at 1:48 pm

@Rihan bhai mujhe mt6582m k liye custom rom chahiye …….wo kaise port karoo..?? Reply Rohan Arya 



 Aug 8, 2015 at 6:24

pm

Bhai follow the tutorial here.. MT6582 and MT6582M are same. You won’t face any problems while porting the ROM from any MT6582 device. Reply saif



 Aug 13,

2015 at 10:59 am

Bhai ….maine tmhare tutorual ko follow kiya but….ported rom ko install krne k baad mobile on hi ni ho raha h.. ? Bss us rom ka log o aata h phir chala jaata hai… Again and again….. What is the problm…??? Thnxx in advance Reply

saif

  Aug 8, 2015 at 5:28 pm

Rply bhai…. Reply Abdullah



 Aug 9, 2015 at 9:56 am

how do I get – META-INF System boot.img Does it also found in stock r om? Reply amit gupta



 Aug 11, 2015 at 1:20 am

I have lava iris 454 mt 6577 kernel 3.0.13 ics 4.0.4 can u help me to find the right costom rom i have tried many roms but all have same camra bug or can u tell me which rom i port for my device… thanks plzz tell me Reply amit gupta



 Aug 11, 2015 at 1:23 am

plzz tell me best rom for lava iris 454 which can i port Reply amit gupta



 Aug 11, 2015 at 1:26 am

anybody is there help me soon Reply Durgesh

  Aug 12, 2015 at 6:04 pm

I have flashed cm12.1 ROM in mtk6582 device but facing some problems such as I can capture pictures but !!! can’t record video!!! !!!! Unable to record audio it says unable to access the card and Google app says unable to connect microphone while voice search !!!! !!!!! WiFi hotspot also not working !!!! !!!!! Sim 1 APN shows sim 2 ‘ APN and on edit it it also make change in some 2’apn !!!!!!!¿¿ Please help me or guide me to solve this problems…. Reply Aravind



 Aug 13, 2015 at 10:05 pm

Hi, I have a U9592 ulefone with mt6592 running on 4.2.2. I wish to upgrade to 4.4.What rom can I use and can I follow the tutorial you had mentioned above? Reply Abdullah



 Aug 14, 2015 at 11:31 am

how do I get – META-INF System boot.img Does it also found in stock r om? Reply Abdullah



 Aug 14, 2015 at 11:32 am

how do I get – META-INF System boot.img Does it also found in stock r om? Please help me Reply Jared

  Aug 19, 2015 at 5:43 am

Sir i tried porting a rom with the same chipsets mt6582 also with same screen resulotion using your guide. But whenever i tried flashing, it was stock in boot screen and after a while it will restart and eventually boot back to recovery how am i going to fix this? Reply Jared

  Aug 19, 2015 at 8:57 am

Sir i tried porting rom from the same chipset mt6582 using this as my guide. However when i tried

flashing the ported rom, it was stuck in boot logo and after a while it will restart and eventually boot back to recovery. How am i going to fix this? Reply Krushn



 Aug 19, 2015 at 10:16 pm

OK, I replaced all the files as u said. now do I have to use Windows zip maker to zip it or anything else? please tell me… Reply Krushn



 Aug 19, 2015 at 10:18 pm

OK, I replaced all the files as u said. now do I have to use Windows zip maker to zip it or anything else? please tell me… can I do all this copy paste thing and packing using es explorer on my Android device xolo q1020 mt6582? Reply Krushn



 Aug 19, 2015 at

10:36 pm

I have stock Android 4.4.2 on my xolo q1020. can I port 5.x rom like lollifox or resurrection remix or any other for my device? Reply HSaber



 Aug 23, 2015 at 3:36 am

Hello, I read your tutorial but I have a question, can I port a custom rom which is 6572 to my SoC which is 6752 I found a very nice rom and I would like to port it, if that is possible how can I do it . Thanks. Best Regards Reply Sayanu Chatterjee



 Aug 26, 2015 at 12:25 am

Bro i ported Amigo Rom…in my Micromax A107…but after dat phn booted but camera, flashlight, backnotification led not working…nd my phn is lp based so internal is emulated…nd in dt rom..my internal also not mounting..! Nd other working well. My soc mtk6582. Help me bro… Reply wfzein

  Aug 26, 2015 at 11:25 am

hi.. i have android one device, i have install pure kitkat 4.4.4, and i want to try port miui v6, it’s possible? Reply sam



 Aug 30, 2015 at 1:19 pm

Hello…impressive work by you Rahan… I need your help… I am new to this things… Which Rom is compatible that Can I use on my Micromax A108 kitkat Mtk 6582…kernels 3.4.67, stock Rom android version 4.4.2 ….. Please suggest. Reply Rohan Arya 



 Aug 30, 2015 at

3:14 pm

Try to port any ROM from – Micromax A106, Micromax Canvas 2.2 Colors, Coolpad 7295C. You can get most of the ROMs from these devices! Reply  jose



 Sep 2, 2015 at 5:43 pm

Can i port jelly bean to kitkat Reply Prince Dhiman



 Sep 7, 2015 at 11:44 am

Hello Which Rom is compatible that Can I use on my Micromax q380 Lollipop Mtk 6582, stock Rom android version 5.0 ….. Please suggest. Reply Uchechi



 Sep 8, 2015 at 10:04 pm

Please can you recommend a single sim custom r om (SOC 6582) for tablet running 4.2.2. In fact it is Tecno Padmini II aka G9, 1 gig Ram, 16gig Rom, 720 × 1024. I need it to port it to my tab. Thanks for your anticipated help. Reply nagaro344



 Sep 11, 2015 at 8:32 pm

vold.fstab vold.fstab.nand i don’t have these two in system

Reply Rohan Arya 



 Sep 11, 2015 at

9:17 pm

Ignore them and replace other files. Reply Bhuwan Shrestha



 Sep 12, 2015 at 7:37 am

Hello I have ported rom from another mtk 6589 of same kernel and os to mine, it runs fine but the problem is that it didnot show my storage both internal and external sd card so can you help me Reply Jomasuro



 Sep 12, 2015 at 8:05 am

How can i fix apps crashing i try to port a touchwiz rom to my blade l2 Reply yahya2002



 Sep 12, 2015 at 9:06 pm

can you port MT6582 roms to MT6572? Reply noobs



 Sep 15, 2015 at 7:18 pm

can we port any rom for mtk6571 Reply Krushn Dayshmookh



 Sep 19, 2015 at 11:41 am

hi, I tried to port c m12.1 made for mt6582 for my xolo q1020 ru nning 4.4.2 mt6582. the ROM shows boot animation again and again. it didn’t start…. pls tell me what to do… pls Reply Hameed



 Sep 19, 2015 at 1:57 pm

Bro after flashing ROM completed installed but log.bin show after my screen deem or off not running bootanimion how to fix this problem plz bro rply Reply pyx



 Sep 21, 2015 at 8:48 am

Hii…my phone mi4w fake…rom to format via sptools…pls stock rom my phone mi4w mt6582 Reply Billy



 Sep 22, 2015 at 4:26 am

Could you please fix the instructions. In many places you write “Now replace these files in ROM to Port‘s /System/Bin folder.” it would be better to write “Now copy these files to the ROM to Ports/System/Bin folder.” Other places you wrote: ” Copy boot.img [From Stock ROM]and replace it with the ROM to Port‘s.” it would be better if wrote : “Copy boot.img from the [Stock ROM] to [ROM to Ports]. In general I think they way you use “replace it with” is very confusing, please consider editing article and use “copy to” instead. Also if you use [STOCK ROM] and [PORT ROM] everywhere to will make thinks clear. Cheers Thanks for the article. Reply Harry



 Sep 24, 2015 at 11:59 am

Hey man I wonder if you could help me in porting kk4.4.2 to kk4.4.4 pls here my WhatsApp I’m a newbie also need help for creating metainf folder +919501886109 Reply ro

  Sep 24, 2015 at 3:28 pm

What about the META.INF folder? anything to edit or replace for the updater script ???? Reply Miui Porting 5.9.1 v7



 Sep 25, 2015 at 8:35 am

how to port mt6571 to mt6582 am direct editing system file in linux. system.img to flash sp flash tool. unpack my stock system.img to linux n change bootanimation n repack n flash with sp flash tool for testing its works no problem. when i port mt6571 to mt6582 same kitkat 4.4.2 version n

flash with sp flash tool ok done to flash. power on my phone n stock on bootanimation. thanks for advices Reply Miui Porting 5.9.1 v7



 Sep 25, 2015 at 8:38 am

how to port mt6571 to mt6582 am direct editing system file in linux. system.img to flash sp flash tool. unpack my stock system.img to linux n change bootanimation n repack n flash with sp flash tool for testing its works no problem. when i port mt6571 to mt6582 same kitkat 4.4.2 version n flash with sp flash tool ok done to flash. power on my phone n stock on bootanimation. thanks for advices Reply Anonymus



 Sep 27, 2015 at 9:32 am

Thanks Man it worked i have ported 2 roms your awesome cheers! Reply SVP



 Sep 28, 2015 at 11:30 pm

Waw man..Great tutorial..Hats Off.. Reply Amar

 Oct 3, 2015 at 1:47 am



I have unite2 but i want to por t mtk6592 cm12.1 Based Rom for unite 2 how can i port please guide me and what about boot.img Reply vinay



 Oct 11, 2015 at 10:48 am

I have micromax unite 2 i want to port android marshmallow 6.0 from micromax canvas a1 which has the same chipset…how to do it? plzz reply… Reply sakawat



 Oct 15, 2015 at 6:36 pm

can i port gionee elife s7 stock rom for gionee elife s5.5 will it done? and work good? Reply simar

  Oct 16, 2015 at 2:32 am

Sir….My device is Gionee Gpad G1 MT6577 from where I can download Rom to port into it….help me Reply Neeraj Kumawat



 Oct 23, 2015 at 11:44 pm

There is any rom for karbonn A119 which suit best mtk6572 then plzzz anyone send the link so I can port Rom for my device Reply Neeraj Kumawat



 Oct 23, 2015 at 11:46 pm

I have 4.4.2 kitkat version Reply Mharchie



 Oct 31, 2015 at 7:15 am

Good day sir!I have tried porting ROM using this guide I followed everything but when i flashed it it said installation aborted what could it be problem sir!?Thank you in advance! Reply abuzayyan



 Nov 17, 2015 at 11:38 am

Hello sir i have mito t777,and i succesed port and flash miui v6.but i got issues.when i’m in the home screen or i acces to app my device have white screen and then my device restar.please help me sir what can i do to fix it..thank you so much.. Reply

LEAVE A REPLY Name *

Website

Comment

Email *

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF