How to Config Axx

IVT 16.2c VT220 Terminal Emulator. Session 3908 to COM1,19200 established. axxcli Unknown command May be one from the following list: cc

help

omscli

osiping

ping

>omscli --------------------------------------------------OMS 860 Command Line Interface --------------------------------------------------Enter OMSCLI password: ****** OMSCLI>ip IP-ADDRESS: SUBNET-MASK: DEFAULT-GATEWAY:

0.0.0.0 0.0.0.0 0.0.0.0

MANAGER: COMMUNITY/PASSWORD: ACCESS: TRAPS:

0.0.0.0 public super disable

OMSCLI>Community-Handler\.. OMSCLI>man OMSCLI>Management-Modes\sys sys=ipun Change management configuration, are you sure? (y/n)? y SYSTEM-MODE:

ipunnumbered

OMSCLI>Management-Modes\.. OMSCLI>ip ip=192.168.22.77 sub=255.255.255.248 --- Change IP address, are you sure (y/n)? y IP-address change requires device-restart. !!! REMARK !!! Exiting CLI will lead to an automatic device-restart ! IP-ADDRESS: SUBNET-MASK: DEFAULT-GATEWAY:

192.168.22.77 255.255.255.248 0.0.0.0

OMSCLI>.. OMSCLI>exit Pending device-restart (IP-address and/or subnet change) is triggered now .... Saving Boot safe data to flash. Please wait...

************************************************** ************* Hard Start-Up Process ************* ************************************************** �

BOOTSTRAP SW V1.0

Date

16-Jun-2005

Time

14:24:47

BUS test started. BUS test SUCCESS ! REASON FOR BOOT IS: HARD OR SOFT RESET SW ERROR/RESET CODE IS 0x0 Startup menu ��������������������������Ŀ � Continue � ��������������������������Ĵ � [1] Download sw � � [2] Force full diag � � [3] Continue � ���������������������������� Enter your choice: Continue Bootstrap process... Reading Application from Compact Flash (\SwBank1) ..... Decompressing SW ... 6b0000OK Boot Complete: Starting Application Sw...

OK