How to Check Transport With Ping Continous From RBS3000 6000

November 5, 2020 | Author: Anonymous | Category: N/A
Share Embed Donate


Short Description

Download How to Check Transport With Ping Continous From RBS3000 6000...

Description

================================================================================ == How to ping Router from RBS6000 (Iub Over IP), with moshell 9.0_, NodeB S/W W10B . ================================================================================ == Please find below the step by step. EtHostMo_startPing -d -h -c -s 1. Find IP Router destination we want to ping. . MDN220W_Tanjung_Gusta> get IpInterface=1 ================================================================================ ================================= 82 Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,E xchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 ================================================================================ ================================= IpInterfaceId 1 accessControlListRef availabilityStatus 0 (NO_STATUS) defaultRouter0 10.160.145.xxx defaultRouter0State 1 (ENABLED) defaultRouter1 0.0.0.0 defaultRouter1State 0 (DISABLED) defaultRouter2 0.0.0.0 defaultRouter2State 0 (DISABLED) defaultRouterPingInterval 4 defaultRouterTraffic 0 (TRAFFIC_DEF_ROUTER_0) froId 1 logging 1 (ENABLED) maxNoOfFailedPings 2 maxWaitForPingReply 3 mtu 1444 networkPrefixLength 27 noOfPingsBeforeOk 2 operationalState 1 (ENABLED) ownIpAddressActive 0.0.0.0 ownIpAddressPassive 0.0.0.0 reservedBy [1] = >>> reservedBy = IpSystem=1,IpAccessHostEt=1 rps false subnet 10.160.145.yyy switchBackTimer 180 trafficType 0 (NOT_USED) userLabel vLan true vid 104 vlanRef ================================================================================ ================================= Total: 1 MOs Router: 10.160.145.xxx

3. Find the MDN220W_Tanjung_Gusta> fro IpAccessHostEt ================================================================================ ================================= MO Attribute Value ================================================================================ ================================= IpAccessHostEt=1 ipacHostEtFroId 1 ================================================================================ ================================= Total: 1 MOs or: MDN220W_Tanjung_Gusta> stip ================================================================================ ======================================= ET Host MOName Lnh Ntp Fro HostIp Vid HIRP IpAcces sHostPool/IpAccessSctp ================================================================================ ======================================= DUW2001 Et=1-01-1 1 000100 1 10.160.145.zzz 104 11-1 1-01 ================================================================================ ======================================= Total: 1 MOs

4. Direct put command moshell eMDN220W_Tanjung_Gusta> EtHostMo_startPing -d 10.142.0.xxx -h 1 -c 10 -s 1472 $ EtHostMo_startPing -d 10.142.0.xxx -h 1 -c 10 -s 1472 $ (10.160.145.) received echo reply from (10.142.0.xxx). icmpSeq=0 time=19 ms (10.160.145.zzz) received echo reply from (10.142.0.xxx). icmpSeq=1 time=18 ms (10.160.145.zzz) received echo reply from (10.142.0.xxx). icmpSeq=2 time=19 ms (10.160.145.zzz) received echo reply from (10.142.0.xxx). icmpSeq=3 time=19 ms (10.160.145.zzz) received echo reply from (10.142.0.xxx). icmpSeq=4 time=19 ms (10.160.145.zzz) received echo reply from (10.142.0.xxx). icmpSeq=5 time=18 ms (10.160.145.zzz) received echo reply from (10.142.0.xxx). icmpSeq=6 time=18 ms (10.160.145.zzz) received echo reply from (10.142.0.xxx). icmpSeq=7 time=19 ms (10.160.145.zzz) received echo reply from (10.142.0.xxx). icmpSeq=8 time=19 ms (10.160.145.zzz) received echo reply from (10.142.0.xxx). icmpSeq=9 time=19 ms ----- 10.160.145.zzz PING statistics ----10 packets transmitted from (10.160.145.zzz) to (10.142.0.xxx). Packets received/timed-out: 10/0 (Packet loss 0%) round-trip (ms) min/avg/max: 18/18/19 $ EtHostMo_startPing -d 10.130.68.30 -h 1 -c 20 -s 1472 ======================================================

How to ping Router from RBS3000 (Iub Over IP), with moshell 9.0_, NodeB S/W W10B . ======================================================= Please find below the step by step. EtHostMo_startPing -d -h -c -s 1. Find where the ETMFX Board MDN858W_Kapt_Sumarsono> cab ================================================================================ ==================================== SMN APN BOARD FAULT OPER MAINT PRODUCTNUMBER REV SERIAL DATE TEMP COREMGR ================================================================================ ==================================== 0 1 CBU1 OFF ON 16HZ ROJ1192209/1 R5J CB4E013325 201008 17 +66C * 0 2 ET-MFX OFF ON OFF ROJ1192315/2 R1A TU8GK62726 201005 10 0 4 RAX12 OFF ON 16HZ ROJ1192187/7 R1B AE53044192 200607 04 0 5 RAX12 OFF ON 16HZ ROJ1192187/7 R1C TU8G603492 200811 15 0 6 RAX OFF ON 16HZ ROJ1192187/14 R1E TD3H108599 201112 03 0 7 RAX OFF ON 16HZ ROJ1192187/14 R1E TD3H181122 201202 24 0 10 TX6HS-04 OFF ON 16HZ ROJ1192254/8 R1E TD3H059373 201110 18 0 11 TX6HS-04 OFF ON 16HZ ROJ1192254/8 R1D B118031922 201101 01 0 12 OBIF OFF ON 16HZ ROJ1192238/23 R1G B117463613 201008 20 ------------------------------------------------------------------------------------------------------------------ETMFX Board: 000200 2. Find IP Router destination we want to ping. . MDN858W_Kapt_Sumarsono> get IpInterface=1 ================================================================================ ================================= 65 Equipment=1,Subrack=1,Slot=2,PlugInUnit=1,E xchangeTerminalIp=1,InternalEthernetPort=1,IpInterface=1 ================================================================================ ================================= IpInterfaceId 1 accessControlListRef availabilityStatus 0 (NO_STATUS) defaultRouter0 10.165.161.xxx defaultRouter0State 1 (ENABLED) defaultRouter1 0.0.0.0 defaultRouter1State 1 (ENABLED) defaultRouter2 0.0.0.0 defaultRouter2State 1 (ENABLED) defaultRouterPingInterval 4

defaultRouterTraffic 0 (TRAFFIC_DEF_ROUTER_0) froId 3 logging 1 (ENABLED) maxNoOfFailedPings 2 maxWaitForPingReply 3 mtu 1500 networkPrefixLength 27 noOfPingsBeforeOk 2 operationalState 1 (ENABLED) ownIpAddressActive 0.0.0.0 ownIpAddressPassive 0.0.0.0 reservedBy [1] = >>> reservedBy = IpSystem=1,IpAccessHostEt=1 rps false subnet 10.165.161.yy switchBackTimer 180 trafficType 0 (NOT_USED) userLabel vLan true vid 408 vlanRef ================================================================================ ================================= Total: 1 MOs Router: 10.165.161.xxx 3. Find the MDN858W_Kapt_Sumarsono> fro IpAccessHostEt ================================================================================ ================================= MO Attribute Value ================================================================================ ================================= IpAccessHostEt=1 ipacHostEtFroId 1 ================================================================================ ================================= Total: 1 MOs or: MDN858W_Kapt_Sumarsono> stip ================================================================================ ======================================= ET Host MOName Lnh Ntp Fro HostIp Vid HIRP IpAccessHo stPool/IpAccessSctp ================================================================================ ======================================= MFX11 Et=1-02-1 1 000200 1 10.165.161.zzz 408 11-1 1-01 ================================================================================ ======================================= Total: 1 MOs

4. Command moshell

MDN858W_Kapt_Sumarsono> lhsh 000200 ; EtHostMo_startPing -d 10.165.161.xxx -h 1 -c 5 -s 1472 $ lhsh 000200 Welcome to OSE Shell ose5.4. 000200> EtHostMo_startPing -d 10.165.161.94 -h 1 -c 5 -s 1472 000200> (10.165.161.zzz) received echo reply from (10.165.161.xxx). icmpSeq=0 ti me=9 ms (10.165.161.zzz) received echo reply from (10.165.161.xxx). icmpSeq=1 time=8 ms (10.165.161.zzz) received echo reply from (10.165.161.xxx). icmpSeq=2 time=8 ms (10.165.161.zzz) received echo reply from (10.165.161.xxx). icmpSeq=3 time=8 ms (10.165.161.zzz) received echo reply from (10.165.161.xxx). icmpSeq=4 time=8 ms ----- 10.165.161.zzz PING statistics ----5 packets transmitted from (10.165.161.zzz) to (10.165.161.xxx). Packets received/timed-out: 5/0 (Packet loss 0%) round-trip (ms) min/avg/max: 8/8/9 000200> exit $

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF