Home Office Hank: Page - 1 - of 31

 

 

Home Office Hank

© IlDikko  IlDikko  All IlDikko patterns are protected by international copyright laws and are intended for personal use only. All rights reserved. It is prohibited to distribute instructions instructions on paper or electronica electronically. lly. You may not sell or share the patterns, do not post them on the Internet or translate them into other languages. You may sell any item made personally by you according to my pattern. Every person who uses my patterns to make items for sale must have their own copy of the pattern. Items for sale must state in the item description that they are designed by IlDikko and also include a link to my website (www.ildikko-crochet.com) (www.ildikko-crochet.com).. If you have questions about this pattern, please feel f eel free to contact me! Thanks and enjoy! E-Mail:  [email protected]  E-Mail: Page - 1 - of 3

 

 

Materials   Yarn/wool: Yarn/wool: I have used Catania yarn from Schachenmayr in beige (0263 – 2 x 50g), white (0106 < 50g), black (0110 < 50g), light blue (0247 < 50g), red (0115 < 50g), anthracite (0429 < 50g), brown (0157 < 50g), silver (0172 < 50g), blue (0201 < 50g), Fancy Alize Decofur yarn in brown (00026 < 100g) for the hair and Puppets



             

      

   





Eldorado yarn in brown (7359 < 50g) color for the beard Crochet hook: 3.0 mm Tapestry needle Filling Scissors Two 9 mm black safety eyes Approx. 210 cm of single core copper PVC-coated electrical wire (diameter: 2,5mm) Approx. 150 cm of thin wire (diameter: 1,5 mm) to be used for fingers, laptop and headset Rubber tape (electrician’s (electrician’s tape) 1,5 cm wide to secure wire ends ends   Pliers for cutting wire

  Thicker cardboard for stuffing the slippers



Abbreviations ch sc hdc slst inc dec hdcinc

-

chain single crochet half double crochet slip stitch increase (2 sc in next st) decrease (2 sc worked off together) half double crochet increase (2 hdc in next st)

(nr) () 2-times () 3-times FO

-

indicates the total number of stitches in the current row/round repeat the instructio instruction n stated in pharanthe pharanthesis sis twice repeat the instructio instruction n stated in pharanthe pharanthesis sis 3-times fasten off

Page - 2 - of 31

 

 

Important Notes   All rounds are worked in a continuous spiral (except Hank’s Hank’s eyelids,  eyelids, hair, tie, laptop, parts of his shirt and slippers). Do not join or turn, unless instructed otherwise   Using invisible decrease instead of decrease makes the final result nicer   You may find it useful to use a stitchmarker for counting your rounds







Amigurumi’s face, it is a very important important part of the   Take your time to create your Amigurumi’s final result   While stuffing and making the wire frame take care to give each part a nice shape   You may want to use thinner wire for the fingers, laptop and headset as it can be bent easier   Pair 1 strand of brown Puppets Eldorado yarn with 1 strand of beige Catania yarn for the beard.



 



Size of finished figure Using the above metioned yarn and hook Home Office Hank will be 40 cm tall.

Realization Nose

With beige yarn: Round 1.  Round 2. 

Round 3.  Round 4.  Round 5.  Round 6.  Round 7. 

ch 7 (7) sc in second ch from hook, 4 sc (= sc in the next 4 ch), 3 sc in last ch. Continue on the other other side of beginning ch: 4 sc (= sc in next 4 ch), 2 sc into the last ch (you made the first sc into this ch) (14) inc, 4 sc, 3 inc, 4 sc, 2 inc (20) sc* (20) (3 sc, dec)* (16) (2 sc, dec)* (12) sc* (12)

slst in next stitch. FO. Page - 3 - of 31

 

 

Head

With beige Catania yarn paired with brown Puppets Eldorado yarn:  Round 1.  Round 2. 

Round 3.    Round 4. Round 5.  Round 6.  Round 7.  Round 10. 

ch 12 (12) sc in second ch from hook, 9 sc (= sc in the next 9 ch), 3 sc in last ch. Continue on the other other side of beginning ch: 9 sc (= sc in next 9 ch), 2 sc into the last ch (you made the first sc into this ch) (24) inc, 9 sc, 3 inc, 9 sc, 2 inc (30) (sc, inc), 9 sc, (sc, inc) 3-times, 9 sc, (sc, inc) 2-times (2 sc, inc), 9 sc, (2 sc, inc) 3-times, 9 sc, (2 sc, inc) 2-times (3 sc, inc), 9 sc, (3 sc, inc) 3-times, 9 sc, (3 sc, inc) 2-times – Round 9. sc* 9 sc, ch2, skip 1, 38 sc

(36) (42) (48) (48) (49)

The main body skeleton wire will go through the hole just created.

Round 11.  Round 12. 

9 sc, sc into the 2 ch loop from previous round, 38 sc sc*

(48) (48)

In next round nose and head will be crocheted toge together. ther. Stuff the nose. The starting point will be the 6th stitch after the finishing stitch of the nose (see pictures below).

Page - 4 - of 31

 

 

With beige yarn: Round 13.  Round 14. 

Round 15.  Round 16.  Round 26.  Round 27. 

31 sc, insert hook through nose and head stitches as you see on the pictures above: 6 sc, work again on the head stitches: 11 sc 31 sc, insert hook through the remaining stitches of the nose, see pictures below: 6 sc, work again on the head stitches: 11 sc

(48)

(6 sc, dec)* – Round 25. sc* (5 sc, dec)* (4 sc, dec)*

(42) (42) (36) (30)

(48)

In the next step the main head and body skeleton will be created: In my case the wire for head and body was approximatel approximately y 140 cm long. Keep the size of the hook and the gauge of the yarn you are using in mind. You may want to leave the wire rather a bit longer. Adjust it to the final length, when the size of the body is evident.

Make a loop at the middle part of the wire. This loop should fit exactly into the head. Secure the loop with the rubber tape. Insert the wire loop into the head as you see on the pictures below. Start stuffing the head (stuff nicely around the wire) and keep on stuffing while crocheting. Take care to give it a nice shape!

Page - 5 - of 31

 

 

Round 28.  Round 29. 

(3 sc, dec)* (2 sc, dec)*

(24) (18)

Round 30.  Round 31. 

(sc, dec)* dec*

(12) (6)

FO. Close the hole by leading the thread through the front loops of last round, pull it tight and weave the yarn tail into the head.

Page - 6 - of 31

 

 

Eyes

Eyeballs with white yarn (make 2): Round 1.  Round 2. 

ch 4 sc in second ch from hook, sc, 3 sc in last ch. Continue on the other side of beginning ch: sc, 2 sc into the last ch (you made the first sc into this ch) inc, sc, 3 inc, sc, 2 inc (sc, inc), sc, (sc, inc) 3-times, sc, (sc, inc) 2-times sc*

Round 3.  Round 4.  Round 5.    Round 6. (sc, dec), sc, (sc, dec) 3-times, sc, (sc, dec) 2-times slst in next stitch. FO. Leave a long yarn tail for sewing it to the head.

(4)

(8) (14) (20) (20) (14)

Eyelids with beige yarn (make 2): Eyelids are crocheted in rows. Row 1.  Row 2.  Row 3.  Row 4. 

ch11 starting at second ch from hook: 10 sc, ch 1, turn dec, 2 sc, dec, 2 sc, dec, turn 3 dec, slst, DO NOT TURN!

(11) (10) (7)

slst around. FO. Leave a long yarn tail for sewing it to the head. Insert the black safety eyes into the eyeball (see pictures above). Sew the eyes with invisible stitches to the head. For the exact place see the pictures below. Stuff the eyes softly with a small amount of filling while sewing. Sew the eyelids onto the eyeballs.

Page - 7 - of 31

 

 

Hair Hair is crocheted in two parts: top part and side part. Top part with brown Fancy Alize Decofur yarn:

Round 1.  Round 2.  Round 3.  Round 4.  Round 5.  Round 6. 

6 sc in double adjustable ring inc* (sc, inc)* (2 sc, inc)* (3 sc, inc)* (4 sc, inc)*

(6) (12) (18) (24) (30) (36)

slst in next stitch. FO; leave a long yarn tail and sew it with invisible stitches to the top of the head. See the pictures for the exact place.

Page - 8 - of 31

 

 

Side part is crocheted in rows. With brown Fancy Alize Decofur yarn:

Row 1.  Row 2.  Row 3.  Row 7.  Row 8.  Row 9.  Row 21.  Row 25.  Row 26. 

ch 9 starting from 2nd chain from hook: 8 sc, ch1, turn – Round 6. 6 sc, ch1, turn 6 sc, ch 7, turn starting from 2nd chain from hook: sc in next 6 chain stitches, 6 sc, ch1, turn – Round 20. 12 sc, ch1, turn – Round 24. 6 sc, ch1, turn 6 sc, ch3, turn starting from 2nd chain from hook: sc in next 2 chain stitches, 6 sc, DO NOT TURN

(9) (8) (6) (13) (12) (12) (6) (9) (8)

FO; leave a long yarn tail and sew it with invisible stitches to the head. See the pictures for the exact place.

Comb and cut cut Hank’s hair as you see on the pictures below. Only below. Only the side part needs to be shortened, move your scissors in vertical direction direction..

Page - 9 - of 31

 

 

Ears

With beige yarn (make 2): Round 1.  Round 2.  Round 3. 

6 sc in double adjustable ring 4 inc, 2 sc (sc, inc) 4-times, slst

(6) (10) (13)

FO; leave a long yarn tail and sew it with invisible stitches to the head. See the pictures for the exact place.

Embroider the mouth and eyelines with black yarn. For exact place and position see the pictures below.

Page - 10 - of 31

 

 

Body

With red yarn: Round 1.  Round 2. 

Round 3.  Round 4.  Round 5. 

ch 6 (6) sc in second ch from hook, 3 sc (= sc in the next 3 ch), 3 sc in last ch. Continue on the other other side of beginning ch: 3 sc (= sc in next 3 ch), 2 sc into the last ch (you made the first sc into this ch) (12) inc, 3 sc, 3 inc, 3 sc, 2 inc (18) (sc, inc), 3 sc, (sc, inc) 3-times, 3 sc, (sc, inc) 2-times (24) sc, ch 2, skip 1, inc, 3 sc, (2 sc, inc), ch 2, skip 1, sc, inc, (2 sc, inc), 3 sc, (2 sc, inc) 2-times

(32)

The wire for the legs will later go through the holes just created.

Round 6. 

sc, sc into the 2 ch loop from previous round, sc, inc, 3 sc, (3 sc, inc),

Round 7.  Round 8.  Round 9.  Round 10.  Round 11. 

sc into the 2 ch loop from previous round, 2 sc, inc, (3 sc, inc), 3 sc, (3 sc, inc) 2-times (4 sc, inc), 3 sc, (4 sc, inc) 3-times, 3 sc, (4 sc, inc) 2-times (5 sc, inc), 3 sc, (5 sc, inc) 3-times, 3 sc, (5 sc, inc) 2-times sc* (6 sc, inc), 3 sc, (6 sc, inc) 3-times, 3 sc, (6 sc, inc) 2-times – Round 18. sc*

(36) (42) (48) (48) (54) (54)

With light blue yarn: Round 19.  Round 20.    Round 21. Round 23.  Round 24. 

sc* in back loops: sc*

(54) (54)

– Round 22. sc* (7 sc, dec)* (6 sc, dec)*

(54) (48) (42) Page - 11 - of 31

 

 

Round 25.  Round 26.  Round 29.  Round 30. 

(5 sc, dec)* – Round 28. sc* (4 sc, dec)* – Round 32. sc*

(36) (36) (30) (30)

Start stuffing the body. Keep on stuffing as you go on. Round 33.  Round 34.  Round 39. 

(3 sc, dec)* – Round 38. sc* 3 sc, ch 2, skip 1, 9 sc, ch 2, skip 1, 10 sc

(24) (24) (26)

The wire for the arms will later go through the holes just created.

Round 40.  Round 41.  Round 42.  Round 43.  Round 44. 

3 sc, sc into the ch2 loop, 9 sc, sc into the ch2 loop, 10 sc (2 sc, dec)* (sc, dec)* (sc, dec)* sc*

(24) (18) (12) (8) (8)

With beige yarn: Round 45.  Round 49. 

– Round 48. sc* (sc, inc)*

(8) (12)

slst in next stitch. FO. Leave a long yarn tail for sewing it to the head. The waist of the shirt is crocheted into the front loops of Round 20.

It is crocheted in rows with light blue yarn: Row 1.  Row 4. 

– Round 3. 54 sc

54 sc, ch1, turn

FO. Hide the yarn tail in the body. Page - 12 - of 31

(54) (54)

 

 

Button placket is crocheted in rows with light blue yarn: Row 1.  Row 2. 

ch 28 starting from 2nd chain from hook: 27 sc

(28) (27)

FO. Leave a long yarn tail and sew it with invisible stitches to the shirt. See picture above. Embroider the buttons on the placket with anthracite yarn.

Collar is crocheted in rows. With light blue yarn: Row 1.  Row 2.  Row 3.  Row 4. 

ch 12 starting from 2nd chain from hook: 11 sc, ch1, turn in back loops: 2 hdc, 7 sc, 2 hdc, ch2, turn dc, hdc, 7 sc, hdc, dc, ch1, turn

(12) (11) (11) (11)

slst around the collar. FO. Leave a long yarn tail and sew it with invisible stitches to the shirt. See pictures above.

Take the head and insert the wire into the body as you see on the picture above. Lead the legs’’ wires through the holes created in Round 5. Take care, that the head looks straight legs forward. Sew the body with invisible stitches to the head.

 

Page - 13 - of 31

 

 

Legs

With beige yarn (make 2): Round 1.  Round 2.  Round 19.  Round 20.  Round 22.  Round 23.  Round 37. 

8 sc in double adjustabl adjustable e ring (do not close the hole and leave a long yarn tail for sewing it to the body – see pictures) – Round 18. sc* 4 inc, 4 sc – Round 21. sc* 4 dec, 4 sc – Round 36. sc* (sc, inc)*

(8) (8) (12) (12) (8) (8) (12)

Round 38. 

(2 sc, inc)*

(16)

slst in next stitch. FO. Leave a long yarn tail for sewing it to the foot. Insert the legs’ wires into the legs. See pictures above.

Underpants Legs  

With red yarn (make 2): Round 1.  Round 2.  Round 4.  Round 5.  Round 6.  Round 7.  Round 8.  Round 9. 

ch 15, JOIN – Round 3. sc* (4 sc, inc)* sc* (5 sc, inc)* sc* (6 sc, inc)* sc*

(15) (15) (18) (18) (21) (21) (24) (24)

Page - 14 - of 31

 

 

Stop working in spiral, work in rows instead: Row 1.  Row 2.  Row 3.  Row 4.  Row 5. 

12 sc, turn skip 1, 10 sc, turn skip 1, 8 sc, turn skip 1, 6 sc, turn skip 1, 4 sc

(12) (10) (8) (6) (4)

sc all around, FO. Leave a long yarn tail for sewing it to the underpants later on. Crochet around the starting Round of the underpants’ underpants ’ legs with red yarn and sc stitches.

Pull the underpants’ underpants’ legs over the legs. See pictures below.

Insert the legs’ wires into the legs and sew them to the body. Sew the underpants’ legs underpants’ legs with invisible stitches to the body.

Page - 15 - of 31

 

 

Feet

Feet with beige yarn (make 2): First toe: Round 1.  Round 2. 

9 sc in double adjustable ring – Round 6. sc*

(9) (9)

FO. Second and third toe: Round 1.  Round 2. 

7 sc in double adjustable ring – Round 5. sc*

(7) (7)

6 sc in double adjustable ring – Round 4. sc*

(6) (6)

FO. Fourth toe: Round 1.  Round 2. 

Do not fasten off, but continue crocheting the foot as follows.

Round 5. 

 

Right foot: sc in next 3 st of the fourth toe, sc in next 3 st of the third toe,

sc in next 3 st of the second toe, sc in all 9 st s t of the first toe, sc in next 4 st of the second toe, sc in next 4 st of the third toe, sc in the last 3 remaining st of the fourth toe Left foot sc in next 3 st of the fourth toe, sc in next 4 st of the third toe, sc in next 4 st of the second toe, sc in all 9 st of the first toe, sc in next 3 st of the second toe, sc in next 3 st of the t he third toe, sc in the last 3 remaining st of the fourth toe Page - 16 - of 31

(29)

 

 

Round 6.    Round 7. 

Right foot (2 sc, dec), (sc, dec) 2-times, 6 sc, dec, (2 sc, dec) 2-times, sc, dec Left foot (2 sc, dec) 3-times, 6 sc, dec, (sc, dec) 3-times

– Round 18. sc*

(22) (22)

Stuff the toes. Create the foot loop at the end of the leg’s wire as you see on the pictures below. It should fit exactly into the foot. Secure the loop with rubber tape. Put the foot onto the wire frame.

Round 19. 

Right foot 18 sc, ch 2 (this opening has to surround the leg’s wire, see  see 

pictures below), skip 1 stitch, 3 sc Left foot 8 sc, ch 2 (this ( this opening has to surround the leg’s wire, see pictures below), skip 1 stitch, 13 sc

(23)

Stuff the foot nicely around the wire. Take care to give it a nice shape. Round 20.  Round 21.  Round 22.  Round 23. 

Right foot 18 sc, sc in the ch 2 loop from last round, 3 sc Left foot 8 sc, sc in the ch 2 loop from last round, 13 sc sc*

sc, dec, 9 sc, dec, 8 sc (dec, 8 sc) 2-times

(22) (22) (20) (18)

Keep on stuffing as you go on. Round 24.  Round 25. 

(sc, dec)* dec*

(12) (6)

FO. Close the hole by leading the thread through the front loops of last round, pull it tight and weave the yarn tail into the foot. Sew the leg with invisible stitches to the foot using the yarn tail left on the leg. See pictures above. Page - 17 - of 31

 

 

Arms

Cut a piece of wire for the arms. In my case the wire was approx. 80 cm long. You may want to leave it a little longer as the exact size can be adjusted later. Insert the wire into the body through the two holes created in Round 39, as you see on the picture above. 

Arms with blue yarn (make 2): Round 1.  Round 2.  Round 22.  Round 23. 

8 sc in double adjustabl adjustable e ring (do not pull it tight, but leave a long yarn tail for sewing it to the body) – Round 21. sc* 4 inc, 4 sc – Round 24. sc*

(8) (8) (12) (12)

Stuff the elbow softly. Round 25.  Round 26.  Round 38. 

4 dec, 4 sc – Round 37. sc* (sc, inc)*

(8) (8) (12)

With beige yarn: Round 39.  Round 40. 

in back loops: sc* (3 sc, inc)*

(12) (15)

slst in next stitch. FO. Leave a long yarn tail for sewing it to the hand.

Page - 18 - of 31

 

 

Cuff is crocheted in rows with light blue yarn (make 2):

Row 1.  Row 2.  Row 3. 

in front loops of Round 39: 12 sc, ch4, turn (12) starting from the 2nd ch from hook in in chain stitch stitches: es: 3 sc, 12 sc, ch1, turn (15) 15 sc (15)

FO. Weave the yarn tail into the arm. Insert the arms’ wire into the arms. Insert it carefully, so that the elbow stuffing remains in its place. Sew the arms with invisible stitches to the body. Hide the yarn tail in the body.

Page - 19 - of 31

 

 

Hands Hands with beige yarn (make 2):

Make the 4 fingers/thumb for a hand as follows: Round 1.  Round 2. 

5 sc in double adjustabl adjustable e ring - Round 7. sc*

(5) (5)

Fasten off and weave in the yarn ends on the first 3 fingers. Do not fasten off on the fourth finger. Now put aside one finger and continue working on the one not fastened off.

Round 8. 

Round 9. 

Right hand: sc in next 2 st of the first finger, sc in next 2 st of the second finger, sc in all 5 st of the third finger, sc in next 3 st of the second finger, sc in the last 3 remaining st of the first finger Left hand: sc in next 3 st of the first finger, sc in next 3 st of the second finger, sc in all 5 st of the third finger, sc in next 2 st of the second finger, sc in the last 2 remaining st of the first finger – Round 10. sc*

In next round crochet the thumb with 2 sc to the hand as well: Round 11. 

Right hand: 5 sc, take the thumb and align it with the hand, insert

hook through the thumb and hand stitches, as you see on the pictures above: 2 sc, work into the hand stitches again: 8 sc Left hand: 9 sc, take the thumb and align it with the hand, insert Page - 20 - of 31

(15) (15)

 

 

Round 12. 

  Round 13. Round 14. 

hook through the thumb and hand stitches, as you see on the pictures above: 2 sc, crochet in hand stitches again: 4 sc (15) Right hand: 5 sc, insert hook through the remainin remaining g stitches of the thumb, see pictures above: 3 sc, work in hand stitches again: 8 sc Left hand: 9 sc, insert hook through the remainin remaining g stitches of the thumb, see pictures above: 3 sc, work in hand stitches again: 4 sc (16) (dec, 6 sc)* sc*

(14) (14)

FO. Adjust the length of the arm’s wire. It is supposed to lead into the pointer finger. Make a loop at the end and flatten it. Make it fit into the finger. Cut small pieces of wire (it might be thinner wire, than the rest of the body skeleton) in order to form the hand’s skeleton. Secure them with rubber tape to the arm’s wire. See pictures for exact form and position.

Insert the hand’s wire into the hand. Sew the arm to the hand above the last round of the hand. Hide the yarn tail in the hand. hand. Embroider buttons on the cuff with anthracite anthracite yarn.

Underpants Embroider the pattern on the underpants with white yarn. See pictures below.

Page - 21 - of 31

 

 

Tie

Tie is crocheted in rows with anthracite yarn: Row 1.  Row 2.  Row 3.  Row 4.  Row 5.  Row 6.  Row 25. 

ch 2 2 sc in 2nd chain from hook, ch, turn 2 inc, ch, turn 4 sc, ch, turn 2 dec, ch, turn – Row 24. 2 sc, ch, turn 2 sc, DO NOT TURN!

(2) (2) (4) (4) (2) (2) (2)

slst around. FO. Weave the yarn tail into the tie. Knot is crocheted in rows with anthracite yarn: Row 1.  Row 2.  Row 3. 

ch 7 starting at 2nd chain from hook: 6 sc, ch, turn 6 sc, DO NOT TURN

(7) (6) (6)

FO. Leave a long yarn tail and sew it around the upper end of the tie. See ssecond econd picture above. Band is crocheted in rows with anthracite yarn: Row 1.  Row 2. 

ch 16 starting at 2nd chain from hook: 15 slst

(16) (15)

FO. Leave a long long yarn tail. Lead it around Hank’s neck underneath under neath the collar. Sew it to the tie’s knot. See knot. See pictures below.

Page - 22 - of 31

 

 

Slippers

Slippers are made out of three parts: lower part of the sole, upper part of the sole, strap. Lower part of the sole with brown yarn (make 2): Round 1.  Round 2. 

Round 3.  Round 4.  Round 5.  Round 6.  Round 7.  Round 8.  Round 9. 

ch 15 sc in second ch from hook, 12 sc (= sc in the next 12 ch), 3 sc in last ch. Continue on the other side of beginning ch: 12 sc (= sc in next 12 ch), 2 sc into the last ch (you made the first sc into this ch) inc, 12 sc, 3 inc, 12 sc, 2 inc (sc, inc), 8 sc, 4 hdc, (h (hdc, dc, hdcinc) 3-times, 4 hdc hdc,, 8 sc, (sc, inc) 2-time 2-timess (2 sc, inc), 8 sc, 4 hdc, (2 hdc, hdcinc) 3-times, 4 hdc, 8 sc, (2 sc, inc) 2-times (3 sc, inc), 8 sc, 4 hdc, (3 hdc, hdcinc) 3-times, 4 hdc, 8 sc, (3 sc, inc) 2-times (4 sc, inc), 8 sc, 4 hdc, (4 hdc, hdcinc) 3-times, 4 hdc, 8 sc, (4 sc, inc) 2-times (5 sc, inc), 8 sc, 4 hdc, (5 hdc, hdcinc) 3-times, 4 hdc, 8 sc, (5 sc, inc) 2-times in back loops: sc*

(15)

(30) (36) (42) (48) (54) (60) (66) (66)

slst in next stitch. FO. Leave a long yarn tail. Upper part of the sole is crocheted exactl exactly y the same way, but FO after Round 8. Cut some thicker cardboard in the exact form of the sole. Insert it into the lower part. Sew the upper part to the lower one.

Page - 23 - of 31

 

 

Strap is crocheted in rows with brown yarn (make 2): Row 1.  Row 2. 

ch 31 starting from 2nd chain from hook: 30 hdc

FO. Leave a long yarn tail. Sew it with a few stitches to the sole.

Page - 24 - of 31

(31) (30)

 

 

Headset

Left speaker with black yarn: Round 1.  Round 2.  Round 3.  Round 4.  Round 5.  Round 6.  Round 8. 

6 sc in double adjustable ring inc* in back loops: (sc, inc)* (2 sc, inc)* in back loop: sc* – Round 7. sc* ch2, skip 1, 23 sc

(6) (12) (18) (24) (24) (24) (25)

The wire for the headset will go through the hole just created. Cut a piece of thinner wire for the skeleton of the headset. In my case it was approximately 60 cm long. Keep the size of the hook and the gauge of the yarn you are using in mind. You may want to leave the wire rather a bit longer. Adjust it to the final f inal length, when the size of the headset is evident. Make a loop at the middle part of the wire. This loop should fit exactly into the speaker. Secure the loop with the rubber tape. Insert the wire loop into the speaker as you see on the pictures below. Start stuffing the speaker (stuff nicely around the wire) and keep on stuffing while crochetin crocheting. g.

Round 9.  Round 10.  Round 11.  Round 12. 

sc into the 2 ch loop from previous round, 23 sc (2 sc, dec)* (sc, dec)* dec*

(24) (18) (12) (6)

FO. Close the hole by leading the thread through the front loops of last round, pull it tight and weave the yarn tail into the speaker.

Page - 25 - of 31

 

 

Headband with black yarn: Round 1.  Round 2. 

8 sc in double adjustable ring – Round 49. sc*

(8) (8)

slst in next stitch. FO. Leave a long yarn tail. Lead the headset’s wire into the headband and sew it with invisible stitches to the left speaker. Right speaker with black yarn: Round 1.  Round 2.  Round 3.  Round 4.  Round 5.  Round 6. 

6 sc in double adjustable ring inc* in back loops: (sc, inc)* (2 sc, inc)* in back loop: sc* – Round 7. sc*

(6) (12) (18) (24) (24) (24)

Form the right speaker’s speaker ’s loop from one wire end. It end. It should fit into the speaker nicely. The other end will create the microphone as you see on the pictures below. Secure the wire loop with rubber tape and insert it into the right speaker.

Round 8. 

Round 9. 

ch2 (this opening has to surround the headband’ headband’ss wire, see pictures above), skip 1 stitch, 13 sc, ch 2 (this opening has to surround the microphone’ss wire, see pictures), skip 1 stitch,9 sc microphone’ (26) sc into the 2 ch loop from previous round, 13 sc, sscc into the 2 ch loop from previous round, 9 sc (24)

Stuff the right speaker and keep on stuffing as you go on. Round 10.  Round 11.  Round 12. 

(2 sc, dec)* (sc, dec)* dec*

(18) (12) (6)

Page - 26 - of 31

 

 

FO. Close the hole by leading the thread through the front loops of last round, pull it tight and weave the yarn tail into the speaker. Sew the head band with invisible stitches to the right speaker. Shorten the microphone’s microphone’s wire to the preferred size, bend it back a bit and flatten the end of it. Put some superglue on the microphone’s wire and wrap it up with black yarn. Bend the headset so, that it fits to the head of Hank.

Page - 27 - of 31

 

 

Laptop

Keyboard part is crocheted in rows with black yarn:

Row 1. 

ch 26

(26)

Row 2.  Row 3. 

starting from 2nd chain from hook: 25 sc, ch1, turn – Row 21. 25 sc, ch1, turn

(25) (25)

With silver yarn: Row 22. 

in back loops: 5 sc, ch2, skip 1, 13 sc, ch2, skip 1, 5 sc

(27)

The wire frame will go through the holes just created. Row 23.  Row 24.  Row 41. 

5 sc, sc into the 2 ch loop from previous round , 13 sc, sc into the 2 ch loop from previous round, 5 sc, ch1, turn (25) – Row 40. 25 sc, ch, turn (25) 25 sc, DO NOT TURN! (25)

FO. sc around with black yarn. Leave a long yarn tail.

Start to create the wire frame at this point: Cut a piece of thinner wire. In my case it was approximately 80 cm long. Keep the size of the hook and the gauge of the yarn you are using in mind. You may want to leave the wire rather a bit longer. Adjust it to the final length, when the size of the laptop is evident.

Page - 28 - of 31

 

 

Make a square frame at the middle part of the wire. It should fit exactly into the keyboard part. Secure it with the rubber tape. Fold the keyboard part in half and insert the wire loop into the keyboard as you see on the pictures above. The wire ends should go through the holes created in Row 22. Sew the two layers with invisible stitches to each other. Join with black yarn (make 2):

Round 1.  Round 2. 

6 sc in double adjustab adjustable le ring (do not close the hole and leave a long yarn tail for sewing it to the monitor part) sc*

(6) (6)

slst in next stitch. FO. Leave a long yarn tail for sewing it to the keyboard part later on. Pull the joins onto the wire ends coming out from the keyboard. Monitor part is crocheted in rows with black yarn:

Row 1.  Row 2.  Row 3.  Row 22. 

ch 26 starting from 2nd chain from hook: 25 sc, ch1, turn – Row 21. 25 sc, ch1, turn in back loops: 5 sc, ch2, skip 1, 13 sc, ch2, skip 1, 5 sc

(26) (25) (25) (27)

The wire frame will go through the holes just created. Row 23. 

5 sc, sc into the 2 ch loop from previous round, 13 sc, sc into the 2 ch loop from previous round, 5 sc, ch1, turn (25)

With blue yarn: Row 24. 

– Row 40.

25 sc, ch, turn

(25)

With black yarn:

  Row 41.

25 sc, DO NOT TURN!

Page - 29 - of 31

(25)

 

 

sc along the 4 edges. FO. Leave a long yarn tail. Embroider the screen with white yarn (e.g. the http status code “404” or any other messages), as you see on the pictures picture s below. Fold it in half and lead the two wire ends through the holes created in Row 22.

Create a frame that fits exactly into the monitor. With the black yarn tail sew the two layers together (along the three open edges). Sew the joins with invisible stitches to the monitor part. Embroider the keyboard with black yarn, as you see on the picture below.

Page - 30 - of 31

 

 

CONGRATULATIONS! CONGRATULA TIONS! Home Office Hank is ready !!!

Page - 31 - of 31